Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 282 insertions, 126 deletions

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 4d631a946..f56af0aaa 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1005,12 +1005,14 @@ out:
 		if (!needs_clflush_after &&
 		    obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
 			if (i915_gem_clflush_object(obj, obj->pin_display))
-				i915_gem_chipset_flush(dev);
+				needs_clflush_after = true;
 		}
 	}
 
 	if (needs_clflush_after)
 		i915_gem_chipset_flush(dev);
+	else
+		obj->cache_dirty = true;
 
 	intel_fb_obj_flush(obj, false, ORIGIN_CPU);
 	return ret;
@@ -1144,23 +1146,74 @@ static bool missed_irq(struct drm_i915_private *dev_priv,
 	return test_bit(ring->id, &dev_priv->gpu_error.missed_irq_rings);
 }
 
-static int __i915_spin_request(struct drm_i915_gem_request *req)
+static unsigned long local_clock_us(unsigned *cpu)
+{
+	unsigned long t;
+
+	/* Cheaply and approximately convert from nanoseconds to microseconds.
+	 * The result and subsequent calculations are also defined in the same
+	 * approximate microseconds units. The principal source of timing
+	 * error here is from the simple truncation.
+	 *
+	 * Note that local_clock() is only defined wrt to the current CPU;
+	 * the comparisons are no longer valid if we switch CPUs. Instead of
+	 * blocking preemption for the entire busywait, we can detect the CPU
+	 * switch and use that as indicator of system load and a reason to
+	 * stop busywaiting, see busywait_stop().
+	 */
+	*cpu = get_cpu();
+	t = local_clock() >> 10;
+	put_cpu();
+
+	return t;
+}
+
+static bool busywait_stop(unsigned long timeout, unsigned cpu)
+{
+	unsigned this_cpu;
+
+	if (time_after(local_clock_us(&this_cpu), timeout))
+		return true;
+
+	return this_cpu != cpu;
+}
+
+static int __i915_spin_request(struct drm_i915_gem_request *req, int state)
 {
 	unsigned long timeout;
+	unsigned cpu;
+
+	/* When waiting for high frequency requests, e.g. during synchronous
+	 * rendering split between the CPU and GPU, the finite amount of time
+	 * required to set up the irq and wait upon it limits the response
+	 * rate. By busywaiting on the request completion for a short while we
+	 * can service the high frequency waits as quick as possible. However,
+	 * if it is a slow request, we want to sleep as quickly as possible.
+	 * The tradeoff between waiting and sleeping is roughly the time it
+	 * takes to sleep on a request, on the order of a microsecond.
+	 */
 
-	if (i915_gem_request_get_ring(req)->irq_refcount)
+	if (req->ring->irq_refcount)
 		return -EBUSY;
 
-	timeout = jiffies + 1;
+	/* Only spin if we know the GPU is processing this request */
+	if (!i915_gem_request_started(req, true))
+		return -EAGAIN;
+
+	timeout = local_clock_us(&cpu) + 5;
 	while (!need_resched()) {
 		if (i915_gem_request_completed(req, true))
 			return 0;
 
-		if (time_after_eq(jiffies, timeout))
+		if (signal_pending_state(state, current))
+			break;
+
+		if (busywait_stop(timeout, cpu))
 			break;
 
 		cpu_relax_lowlatency();
 	}
+
 	if (i915_gem_request_completed(req, false))
 		return 0;
 
@@ -1195,6 +1248,7 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	const bool irq_test_in_progress =
 		ACCESS_ONCE(dev_priv->gpu_error.test_irq_rings) & intel_ring_flag(ring);
+	int state = interruptible ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE;
 	DEFINE_WAIT(wait);
 	unsigned long timeout_expire;
 	s64 before, now;
@@ -1208,8 +1262,16 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
 	if (i915_gem_request_completed(req, true))
 		return 0;
 
-	timeout_expire = timeout ?
-		jiffies + nsecs_to_jiffies_timeout((u64)*timeout) : 0;
+	timeout_expire = 0;
+	if (timeout) {
+		if (WARN_ON(*timeout < 0))
+			return -EINVAL;
+
+		if (*timeout == 0)
+			return -ETIME;
+
+		timeout_expire = jiffies + nsecs_to_jiffies_timeout(*timeout);
+	}
 
 	if (INTEL_INFO(dev_priv)->gen >= 6)
 		gen6_rps_boost(dev_priv, rps, req->emitted_jiffies);
@@ -1219,7 +1281,7 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
 	before = ktime_get_raw_ns();
 
 	/* Optimistic spin for the next jiffie before touching IRQs */
-	ret = __i915_spin_request(req);
+	ret = __i915_spin_request(req, state);
 	if (ret == 0)
 		goto out;
 
@@ -1231,8 +1293,7 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
 	for (;;) {
 		struct timer_list timer;
 
-		prepare_to_wait(&ring->irq_queue, &wait,
-				interruptible ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
+		prepare_to_wait(&ring->irq_queue, &wait, state);
 
 		/* We need to check whether any gpu reset happened in between
 		 * the caller grabbing the seqno and now ... */
@@ -1250,7 +1311,7 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
 			break;
 		}
 
-		if (interruptible && signal_pending(current)) {
+		if (signal_pending_state(state, current)) {
 			ret = -ERESTARTSYS;
 			break;
 		}
@@ -1711,8 +1772,8 @@ i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
 
 /**
  * i915_gem_fault - fault a page into the GTT
- * vma: VMA in question
- * vmf: fault info
+ * @vma: VMA in question
+ * @vmf: fault info
  *
  * The fault handler is set up by drm_gem_mmap() when a object is GTT mapped
  * from userspace.  The fault handler takes care of binding the object to
@@ -2214,9 +2275,8 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj)
 	 * Fail silently without starting the shrinker
 	 */
 	mapping = file_inode(obj->base.filp)->i_mapping;
-	gfp = mapping_gfp_mask(mapping);
-	gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD;
-	gfp &= ~(__GFP_IO | __GFP_WAIT);
+	gfp = mapping_gfp_constraint(mapping, ~(__GFP_IO | __GFP_RECLAIM));
+	gfp |= __GFP_NORETRY | __GFP_NOWARN;
 	sg = st->sgl;
 	st->nents = 0;
 	for (i = 0; i < page_count; i++) {
@@ -2545,6 +2605,7 @@ void __i915_add_request(struct drm_i915_gem_request *request,
 	request->batch_obj = obj;
 
 	request->emitted_jiffies = jiffies;
+	request->previous_seqno = ring->last_submitted_seqno;
 	ring->last_submitted_seqno = request->seqno;
 	list_add_tail(&request->list, &ring->request_list);
 
@@ -3206,7 +3267,7 @@ static void i915_gem_object_finish_gtt(struct drm_i915_gem_object *obj)
 					    old_write_domain);
 }
 
-int i915_vma_unbind(struct i915_vma *vma)
+static int __i915_vma_unbind(struct i915_vma *vma, bool wait)
 {
 	struct drm_i915_gem_object *obj = vma->obj;
 	struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
@@ -3225,13 +3286,11 @@ int i915_vma_unbind(struct i915_vma *vma)
 
 	BUG_ON(obj->pages == NULL);
 
-	ret = i915_gem_object_wait_rendering(obj, false);
-	if (ret)
-		return ret;
-	/* Continue on if we fail due to EIO, the GPU is hung so we
-	 * should be safe and we need to cleanup or else we might
-	 * cause memory corruption through use-after-free.
-	 */
+	if (wait) {
+		ret = i915_gem_object_wait_rendering(obj, false);
+		if (ret)
+			return ret;
+	}
 
 	if (i915_is_ggtt(vma->vm) &&
 	    vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL) {
@@ -3276,6 +3335,16 @@ int i915_vma_unbind(struct i915_vma *vma)
 	return 0;
 }
 
+int i915_vma_unbind(struct i915_vma *vma)
+{
+	return __i915_vma_unbind(vma, true);
+}
+
+int __i915_vma_unbind_no_wait(struct i915_vma *vma)
+{
+	return __i915_vma_unbind(vma, false);
+}
+
 int i915_gpu_idle(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3355,11 +3424,10 @@ i915_gem_object_bind_to_vm(struct drm_i915_gem_object *obj,
 {
 	struct drm_device *dev = obj->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 size, fence_size, fence_alignment, unfenced_alignment;
-	u64 start =
-		flags & PIN_OFFSET_BIAS ? flags & PIN_OFFSET_MASK : 0;
-	u64 end =
-		flags & PIN_MAPPABLE ? dev_priv->gtt.mappable_end : vm->total;
+	u32 fence_alignment, unfenced_alignment;
+	u32 search_flag, alloc_flag;
+	u64 start, end;
+	u64 size, fence_size;
 	struct i915_vma *vma;
 	int ret;
 
@@ -3399,6 +3467,13 @@ i915_gem_object_bind_to_vm(struct drm_i915_gem_object *obj,
 		size = flags & PIN_MAPPABLE ? fence_size : obj->base.size;
 	}
 
+	start = flags & PIN_OFFSET_BIAS ? flags & PIN_OFFSET_MASK : 0;
+	end = vm->total;
+	if (flags & PIN_MAPPABLE)
+		end = min_t(u64, end, dev_priv->gtt.mappable_end);
+	if (flags & PIN_ZONE_4G)
+		end = min_t(u64, end, (1ULL << 32));
+
 	if (alignment == 0)
 		alignment = flags & PIN_MAPPABLE ? fence_alignment :
 						unfenced_alignment;
@@ -3414,7 +3489,7 @@ i915_gem_object_bind_to_vm(struct drm_i915_gem_object *obj,
 	 * attempt to find space.
 	 */
 	if (size > end) {
-		DRM_DEBUG("Attempting to bind an object (view type=%u) larger than the aperture: size=%u > %s aperture=%llu\n",
+		DRM_DEBUG("Attempting to bind an object (view type=%u) larger than the aperture: size=%llu > %s aperture=%llu\n",
 			  ggtt_view ? ggtt_view->type : 0,
 			  size,
 			  flags & PIN_MAPPABLE ? "mappable" : "total",
@@ -3434,13 +3509,21 @@ i915_gem_object_bind_to_vm(struct drm_i915_gem_object *obj,
 	if (IS_ERR(vma))
 		goto err_unpin;
 
+	if (flags & PIN_HIGH) {
+		search_flag = DRM_MM_SEARCH_BELOW;
+		alloc_flag = DRM_MM_CREATE_TOP;
+	} else {
+		search_flag = DRM_MM_SEARCH_DEFAULT;
+		alloc_flag = DRM_MM_CREATE_DEFAULT;
+	}
+
 search_free:
 	ret = drm_mm_insert_node_in_range_generic(&vm->mm, &vma->node,
 						  size, alignment,
 						  obj->cache_level,
 						  start, end,
-						  DRM_MM_SEARCH_DEFAULT,
-						  DRM_MM_CREATE_DEFAULT);
+						  search_flag,
+						  alloc_flag);
 	if (ret) {
 		ret = i915_gem_evict_something(dev, vm, size, alignment,
 					       obj->cache_level,
@@ -3633,59 +3716,117 @@ i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write)
 	return 0;
 }
 
+/**
+ * Changes the cache-level of an object across all VMA.
+ *
+ * After this function returns, the object will be in the new cache-level
+ * across all GTT and the contents of the backing storage will be coherent,
+ * with respect to the new cache-level. In order to keep the backing storage
+ * coherent for all users, we only allow a single cache level to be set
+ * globally on the object and prevent it from being changed whilst the
+ * hardware is reading from the object. That is if the object is currently
+ * on the scanout it will be set to uncached (or equivalent display
+ * cache coherency) and all non-MOCS GPU access will also be uncached so
+ * that all direct access to the scanout remains coherent.
+ */
 int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
 				    enum i915_cache_level cache_level)
 {
 	struct drm_device *dev = obj->base.dev;
 	struct i915_vma *vma, *next;
-	int ret;
+	bool bound = false;
+	int ret = 0;
 
 	if (obj->cache_level == cache_level)
-		return 0;
-
-	if (i915_gem_obj_is_pinned(obj)) {
-		DRM_DEBUG("can not change the cache level of pinned objects\n");
-		return -EBUSY;
-	}
+		goto out;
 
+	/* Inspect the list of currently bound VMA and unbind any that would
+	 * be invalid given the new cache-level. This is principally to
+	 * catch the issue of the CS prefetch crossing page boundaries and
+	 * reading an invalid PTE on older architectures.
+	 */
 	list_for_each_entry_safe(vma, next, &obj->vma_list, vma_link) {
+		if (!drm_mm_node_allocated(&vma->node))
+			continue;
+
+		if (vma->pin_count) {
+			DRM_DEBUG("can not change the cache level of pinned objects\n");
+			return -EBUSY;
+		}
+
 		if (!i915_gem_valid_gtt_space(vma, cache_level)) {
 			ret = i915_vma_unbind(vma);
 			if (ret)
 				return ret;
-		}
+		} else
+			bound = true;
 	}
 
-	if (i915_gem_obj_bound_any(obj)) {
+	/* We can reuse the existing drm_mm nodes but need to change the
+	 * cache-level on the PTE. We could simply unbind them all and
+	 * rebind with the correct cache-level on next use. However since
+	 * we already have a valid slot, dma mapping, pages etc, we may as
+	 * rewrite the PTE in the belief that doing so tramples upon less
+	 * state and so involves less work.
+	 */
+	if (bound) {
+		/* Before we change the PTE, the GPU must not be accessing it.
+		 * If we wait upon the object, we know that all the bound
+		 * VMA are no longer active.
+		 */
 		ret = i915_gem_object_wait_rendering(obj, false);
 		if (ret)
 			return ret;
 
-		i915_gem_object_finish_gtt(obj);
-
-		/* Before SandyBridge, you could not use tiling or fence
-		 * registers with snooped memory, so relinquish any fences
-		 * currently pointing to our region in the aperture.
-		 */
-		if (INTEL_INFO(dev)->gen < 6) {
+		if (!HAS_LLC(dev) && cache_level != I915_CACHE_NONE) {
+			/* Access to snoopable pages through the GTT is
+			 * incoherent and on some machines causes a hard
+			 * lockup. Relinquish the CPU mmaping to force
+			 * userspace to refault in the pages and we can
+			 * then double check if the GTT mapping is still
+			 * valid for that pointer access.
+			 */
+			i915_gem_release_mmap(obj);
+
+			/* As we no longer need a fence for GTT access,
+			 * we can relinquish it now (and so prevent having
+			 * to steal a fence from someone else on the next
+			 * fence request). Note GPU activity would have
+			 * dropped the fence as all snoopable access is
+			 * supposed to be linear.
+			 */
 			ret = i915_gem_object_put_fence(obj);
 			if (ret)
 				return ret;
+		} else {
+			/* We either have incoherent backing store and
+			 * so no GTT access or the architecture is fully
+			 * coherent. In such cases, existing GTT mmaps
+			 * ignore the cache bit in the PTE and we can
+			 * rewrite it without confusing the GPU or having
+			 * to force userspace to fault back in its mmaps.
+			 */
 		}
 
-		list_for_each_entry(vma, &obj->vma_list, vma_link)
-			if (drm_mm_node_allocated(&vma->node)) {
-				ret = i915_vma_bind(vma, cache_level,
-						    PIN_UPDATE);
-				if (ret)
-					return ret;
-			}
+		list_for_each_entry(vma, &obj->vma_list, vma_link) {
+			if (!drm_mm_node_allocated(&vma->node))
+				continue;
+
+			ret = i915_vma_bind(vma, cache_level, PIN_UPDATE);
+			if (ret)
+				return ret;
+		}
 	}
 
 	list_for_each_entry(vma, &obj->vma_list, vma_link)
 		vma->node.color = cache_level;
 	obj->cache_level = cache_level;
 
+out:
+	/* Flush the dirty CPU caches to the backing storage so that the
+	 * object is now coherent at its new cache level (with respect
+	 * to the access domain).
+	 */
 	if (obj->cache_dirty &&
 	    obj->base.write_domain != I915_GEM_DOMAIN_CPU &&
 	    cpu_write_needs_clflush(obj)) {
@@ -3728,6 +3869,7 @@ int i915_gem_get_caching_ioctl(struct drm_device *dev, void *data,
 int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
 			       struct drm_file *file)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_caching *args = data;
 	struct drm_i915_gem_object *obj;
 	enum i915_cache_level level;
@@ -3738,6 +3880,15 @@ int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
 		level = I915_CACHE_NONE;
 		break;
 	case I915_CACHING_CACHED:
+		/*
+		 * Due to a HW issue on BXT A stepping, GPU stores via a
+		 * snooped mapping may leave stale data in a corresponding CPU
+		 * cacheline, whereas normally such cachelines would get
+		 * invalidated.
+		 */
+		if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0)
+			return -ENODEV;
+
 		level = I915_CACHE_LLC;
 		break;
 	case I915_CACHING_DISPLAY:
@@ -3747,9 +3898,11 @@ int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
+	intel_runtime_pm_get(dev_priv);
+
 	ret = i915_mutex_lock_interruptible(dev);
 	if (ret)
-		return ret;
+		goto rpm_put;
 
 	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
 	if (&obj->base == NULL) {
@@ -3762,6 +3915,9 @@ int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
 	drm_gem_object_unreference(&obj->base);
 unlock:
 	mutex_unlock(&dev->struct_mutex);
+rpm_put:
+	intel_runtime_pm_put(dev_priv);
+
 	return ret;
 }
 
@@ -3976,6 +4132,29 @@ i915_vma_misplaced(struct i915_vma *vma, uint32_t alignment, uint64_t flags)
 	return false;
 }
 
+void __i915_vma_set_map_and_fenceable(struct i915_vma *vma)
+{
+	struct drm_i915_gem_object *obj = vma->obj;
+	bool mappable, fenceable;
+	u32 fence_size, fence_alignment;
+
+	fence_size = i915_gem_get_gtt_size(obj->base.dev,
+					   obj->base.size,
+					   obj->tiling_mode);
+	fence_alignment = i915_gem_get_gtt_alignment(obj->base.dev,
+						     obj->base.size,
+						     obj->tiling_mode,
+						     true);
+
+	fenceable = (vma->node.size == fence_size &&
+		     (vma->node.start & (fence_alignment - 1)) == 0);
+
+	mappable = (vma->node.start + fence_size <=
+		    to_i915(obj->base.dev)->gtt.mappable_end);
+
+	obj->map_and_fenceable = mappable && fenceable;
+}
+
 static int
 i915_gem_object_do_pin(struct drm_i915_gem_object *obj,
 		       struct i915_address_space *vm,
@@ -4011,15 +4190,13 @@ i915_gem_object_do_pin(struct drm_i915_gem_object *obj,
 			return -EBUSY;
 
 		if (i915_vma_misplaced(vma, alignment, flags)) {
-			unsigned long offset;
-			offset = ggtt_view ? i915_gem_obj_ggtt_offset_view(obj, ggtt_view) :
-					     i915_gem_obj_offset(obj, vm);
 			WARN(vma->pin_count,
 			     "bo is already pinned in %s with incorrect alignment:"
-			     " offset=%lx, req.alignment=%x, req.map_and_fenceable=%d,"
+			     " offset=%08x %08x, req.alignment=%x, req.map_and_fenceable=%d,"
 			     " obj->map_and_fenceable=%d\n",
 			     ggtt_view ? "ggtt" : "ppgtt",
-			     offset,
+			     upper_32_bits(vma->node.start),
+			     lower_32_bits(vma->node.start),
 			     alignment,
 			     !!(flags & PIN_MAPPABLE),
 			     obj->map_and_fenceable);
@@ -4045,25 +4222,7 @@ i915_gem_object_do_pin(struct drm_i915_gem_object *obj,
 
 	if (ggtt_view && ggtt_view->type == I915_GGTT_VIEW_NORMAL &&
 	    (bound ^ vma->bound) & GLOBAL_BIND) {
-		bool mappable, fenceable;
-		u32 fence_size, fence_alignment;
-
-		fence_size = i915_gem_get_gtt_size(obj->base.dev,
-						   obj->base.size,
-						   obj->tiling_mode);
-		fence_alignment = i915_gem_get_gtt_alignment(obj->base.dev,
-							     obj->base.size,
-							     obj->tiling_mode,
-							     true);
-
-		fenceable = (vma->node.size == fence_size &&
-			     (vma->node.start & (fence_alignment - 1)) == 0);
-
-		mappable = (vma->node.start + fence_size <=
-			    dev_priv->gtt.mappable_end);
-
-		obj->map_and_fenceable = mappable && fenceable;
-
+		__i915_vma_set_map_and_fenceable(vma);
 		WARN_ON(flags & PIN_MAPPABLE && !obj->map_and_fenceable);
 	}
 
@@ -4526,22 +4685,6 @@ void i915_gem_init_swizzling(struct drm_device *dev)
 		BUG();
 }
 
-static bool
-intel_enable_blt(struct drm_device *dev)
-{
-	if (!HAS_BLT(dev))
-		return false;
-
-	/* The blitter was dysfunctional on early prototypes */
-	if (IS_GEN6(dev) && dev->pdev->revision < 8) {
-		DRM_INFO("BLT not supported on this pre-production hardware;"
-			 " graphics performance will be degraded.\n");
-		return false;
-	}
-
-	return true;
-}
-
 static void init_unused_ring(struct drm_device *dev, u32 base)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4584,7 +4727,7 @@ int i915_gem_init_rings(struct drm_device *dev)
 			goto cleanup_render_ring;
 	}
 
-	if (intel_enable_blt(dev)) {
+	if (HAS_BLT(dev)) {
 		ret = intel_init_blt_ring_buffer(dev);
 		if (ret)
 			goto cleanup_bsd_ring;
@@ -4602,14 +4745,8 @@ int i915_gem_init_rings(struct drm_device *dev)
 			goto cleanup_vebox_ring;
 	}
 
-	ret = i915_gem_set_seqno(dev, ((u32)~0 - 0x1000));
-	if (ret)
-		goto cleanup_bsd2_ring;
-
 	return 0;
 
-cleanup_bsd2_ring:
-	intel_cleanup_ring_buffer(&dev_priv->ring[VCS2]);
 cleanup_vebox_ring:
 	intel_cleanup_ring_buffer(&dev_priv->ring[VECS]);
 cleanup_blt_ring:
@@ -4679,6 +4816,33 @@ i915_gem_init_hw(struct drm_device *dev)
 			goto out;
 	}
 
+	/* We can't enable contexts until all firmware is loaded */
+	if (HAS_GUC_UCODE(dev)) {
+		ret = intel_guc_ucode_load(dev);
+		if (ret) {
+			/*
+			 * If we got an error and GuC submission is enabled, map
+			 * the error to -EIO so the GPU will be declared wedged.
+			 * OTOH, if we didn't intend to use the GuC anyway, just
+			 * discard the error and carry on.
+			 */
+			DRM_ERROR("Failed to initialize GuC, error %d%s\n", ret,
+				  i915.enable_guc_submission ? "" :
+				  " (ignored)");
+			ret = i915.enable_guc_submission ? -EIO : 0;
+			if (ret)
+				goto out;
+		}
+	}
+
+	/*
+	 * Increment the next seqno by 0x100 so we have a visible break
+	 * on re-initialisation
+	 */
+	ret = i915_gem_set_seqno(dev, dev_priv->next_seqno+0x100);
+	if (ret)
+		goto out;
+
 	/* Now it is safe to go back round and do everything else: */
 	for_each_ring(ring, dev_priv, i) {
 		struct drm_i915_gem_request *req;
@@ -4816,18 +4980,6 @@ init_ring_lists(struct intel_engine_cs *ring)
 	INIT_LIST_HEAD(&ring->request_list);
 }
 
-void i915_init_vm(struct drm_i915_private *dev_priv,
-		  struct i915_address_space *vm)
-{
-	if (!i915_is_ggtt(vm))
-		drm_mm_init(&vm->mm, vm->start, vm->total);
-	vm->dev = dev_priv->dev;
-	INIT_LIST_HEAD(&vm->active_list);
-	INIT_LIST_HEAD(&vm->inactive_list);
-	INIT_LIST_HEAD(&vm->global_link);
-	list_add_tail(&vm->global_link, &dev_priv->vm_list);
-}
-
 void
 i915_gem_load(struct drm_device *dev)
 {
@@ -4851,8 +5003,6 @@ i915_gem_load(struct drm_device *dev)
 				  NULL);
 
 	INIT_LIST_HEAD(&dev_priv->vm_list);
-	i915_init_vm(dev_priv, &dev_priv->gtt.base);
-
 	INIT_LIST_HEAD(&dev_priv->context_list);
 	INIT_LIST_HEAD(&dev_priv->mm.unbound_list);
 	INIT_LIST_HEAD(&dev_priv->mm.bound_list);
@@ -4880,6 +5030,14 @@ i915_gem_load(struct drm_device *dev)
 		dev_priv->num_fence_regs =
 				I915_READ(vgtif_reg(avail_rs.fence_num));
 
+	/*
+	 * Set initial sequence number for requests.
+	 * Using this number allows the wraparound to happen early,
+	 * catching any obvious problems.
+	 */
+	dev_priv->next_seqno = ((u32)~0 - 0x1100);
+	dev_priv->last_seqno = ((u32)~0 - 0x1101);
+
 	/* Initialize fence registers to zero */
 	INIT_LIST_HEAD(&dev_priv->mm.fence_list);
 	i915_gem_restore_fences(dev);
@@ -4949,9 +5107,9 @@ int i915_gem_open(struct drm_device *dev, struct drm_file *file)
 
 /**
  * i915_gem_track_fb - update frontbuffer tracking
- * old: current GEM buffer for the frontbuffer slots
- * new: new GEM buffer for the frontbuffer slots
- * frontbuffer_bits: bitmask of frontbuffer slots
+ * @old: current GEM buffer for the frontbuffer slots
+ * @new: new GEM buffer for the frontbuffer slots
+ * @frontbuffer_bits: bitmask of frontbuffer slots
  *
  * This updates the frontbuffer tracking bits @frontbuffer_bits by clearing them
  * from @old and setting them in @new. Both @old and @new can be NULL.
@@ -4974,9 +5132,8 @@ void i915_gem_track_fb(struct drm_i915_gem_object *old,
 }
 
 /* All the new VM stuff */
-unsigned long
-i915_gem_obj_offset(struct drm_i915_gem_object *o,
-		    struct i915_address_space *vm)
+u64 i915_gem_obj_offset(struct drm_i915_gem_object *o,
+			struct i915_address_space *vm)
 {
 	struct drm_i915_private *dev_priv = o->base.dev->dev_private;
 	struct i915_vma *vma;
@@ -4996,9 +5153,8 @@ i915_gem_obj_offset(struct drm_i915_gem_object *o,
 	return -1;
 }
 
-unsigned long
-i915_gem_obj_ggtt_offset_view(struct drm_i915_gem_object *o,
-			      const struct i915_ggtt_view *view)
+u64 i915_gem_obj_ggtt_offset_view(struct drm_i915_gem_object *o,
+				  const struct i915_ggtt_view *view)
 {
 	struct i915_address_space *ggtt = i915_obj_to_ggtt(o);
 	struct i915_vma *vma;