diff options
| author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-09-08 01:01:14 -0300 |
|---|---|---|
| committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-09-08 01:01:14 -0300 |
| commit | e5fd91f1ef340da553f7a79da9540c3db711c937 (patch) | |
| tree | b11842027dc6641da63f4bcc524f8678263304a3 /drivers/gpu/drm/i915/intel_dvo.c | |
| parent | 2a9b0348e685a63d97486f6749622b61e9e3292f (diff) | |
Linux-libre 4.2-gnu
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dvo.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dvo.c | 27 |
1 files changed, 22 insertions, 5 deletions
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 770040ff4..ece5bd754 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -80,7 +80,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = { .name = "ch7017", .dvo_reg = DVOC, .slave_addr = 0x75, - .gpio = GMBUS_PORT_DPB, + .gpio = GMBUS_PIN_DPB, .dev_ops = &ch7017_ops, }, { @@ -364,7 +364,7 @@ static int intel_dvo_get_modes(struct drm_connector *connector) * that's not the case. */ intel_ddc_get_modes(connector, - intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC)); + intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPC)); if (!list_empty(&connector->probed_modes)) return 1; @@ -495,17 +495,19 @@ void intel_dvo_init(struct drm_device *dev) struct i2c_adapter *i2c; int gpio; bool dvoinit; + enum pipe pipe; + uint32_t dpll[I915_MAX_PIPES]; /* Allow the I2C driver info to specify the GPIO to be used in * special cases, but otherwise default to what's defined * in the spec. */ - if (intel_gmbus_is_port_valid(dvo->gpio)) + if (intel_gmbus_is_valid_pin(dev_priv, dvo->gpio)) gpio = dvo->gpio; else if (dvo->type == INTEL_DVO_CHIP_LVDS) - gpio = GMBUS_PORT_SSC; + gpio = GMBUS_PIN_SSC; else - gpio = GMBUS_PORT_DPB; + gpio = GMBUS_PIN_DPB; /* Set up the I2C bus necessary for the chip we're probing. * It appears that everything is on GPIOE except for panels @@ -520,8 +522,23 @@ void intel_dvo_init(struct drm_device *dev) */ intel_gmbus_force_bit(i2c, true); + /* ns2501 requires the DVO 2x clock before it will + * respond to i2c accesses, so make sure we have + * have the clock enabled before we attempt to + * initialize the device. + */ + for_each_pipe(dev_priv, pipe) { + dpll[pipe] = I915_READ(DPLL(pipe)); + I915_WRITE(DPLL(pipe), dpll[pipe] | DPLL_DVO_2X_MODE); + } + dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c); + /* restore the DVO 2x clock state to original */ + for_each_pipe(dev_priv, pipe) { + I915_WRITE(DPLL(pipe), dpll[pipe]); + } + intel_gmbus_force_bit(i2c, false); if (!dvoinit) |