Initial import

1 files changed, 231 insertions, 0 deletions

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
new file mode 100644
index 000000000..01a1a16ab
--- /dev/null
+++ b/drivers/iio/light/Kconfig
@@ -0,0 +1,231 @@
+#
+# Light sensors
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Light sensors"
+
+config ADJD_S311
+	tristate "ADJD-S311-CR999 digital color sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on I2C
+	help
+	 If you say yes here you get support for the Avago ADJD-S311-CR999
+	 digital color light sensor.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called adjd_s311.
+
+config AL3320A
+	tristate "AL3320A ambient light sensor"
+	depends on I2C
+	help
+	 Say Y here if you want to build a driver for the Dyna Image AL3320A
+	 ambient light sensor.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called al3320a.
+
+config APDS9300
+	tristate "APDS9300 ambient light sensor"
+	depends on I2C
+	help
+	 Say Y here if you want to build a driver for the Avago APDS9300
+	 ambient light sensor.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called apds9300.
+
+config CM32181
+	depends on I2C
+	tristate "CM32181 driver"
+	help
+	 Say Y here if you use cm32181.
+	 This option enables ambient light sensor using
+	 Capella cm32181 device driver.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called cm32181.
+
+config CM3232
+	depends on I2C
+	tristate "CM3232 ambient light sensor"
+	help
+	 Say Y here if you use cm3232.
+	 This option enables ambient light sensor using
+	 Capella Microsystems cm3232 device driver.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called cm3232.
+
+config CM3323
+	depends on I2C
+	tristate "Capella CM3323 color light sensor"
+	help
+	 Say Y here if you want to build a driver for Capela CM3323
+	 color sensor.
+
+	 To compile this driver as a module, choose M here: the module will
+	 be called cm3323.
+
+config CM36651
+	depends on I2C
+	tristate "CM36651 driver"
+	help
+	 Say Y here if you use cm36651.
+	 This option enables proximity & RGB sensor using
+	 Capella cm36651 device driver.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called cm36651.
+
+config GP2AP020A00F
+	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IRQ_WORK
+	help
+	  Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
+	  hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gp2ap020a00f.
+
+config ISL29125
+	tristate "Intersil ISL29125 digital color light sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for the Intersil ISL29125
+	  RGB light sensor for I2C.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called isl29125.
+
+config HID_SENSOR_ALS
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
+	tristate "HID ALS"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Ambient light sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-als.
+
+config HID_SENSOR_PROX
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
+	tristate "HID PROX"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Proximity sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-prox.
+
+config JSA1212
+	tristate "JSA1212 ALS and proximity sensor driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	 Say Y here if you want to build a IIO driver for JSA1212
+	 proximity & ALS sensor device.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called jsa1212.
+
+config SENSORS_LM3533
+	tristate "LM3533 ambient light sensor"
+	depends on MFD_LM3533
+	help
+	  If you say yes here you get support for the ambient light sensor
+	  interface on National Semiconductor / TI LM3533 Lighting Power
+	  chips.
+
+	  The sensor interface can be used to control the LEDs and backlights
+	  of the chip through defining five light zones and three sets of
+	  corresponding output-current values.
+
+	  The driver provides raw and mean adc readings along with the current
+	  light zone through sysfs. A threshold event can be generated on zone
+	  changes. The ALS-control output values can be set per zone for the
+	  three current output channels.
+
+config LTR501
+	tristate "LTR-501ALS-01 light sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the Lite-On LTR-501ALS-01
+	 ambient light and proximity sensor.
+
+	 This driver can also be built as a module.  If so, the module
+         will be called ltr501.
+
+config TCS3414
+	tristate "TAOS TCS3414 digital color sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the TAOS TCS3414
+	 family of digital color sensors.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called tcs3414.
+
+config TCS3472
+	tristate "TAOS TCS3472 color light-to-digital converter"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the TAOS TCS3472
+	 family of color light-to-digital converters with IR filter.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called tcs3472.
+
+config SENSORS_TSL2563
+	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
+	depends on I2C
+	help
+	 If you say yes here you get support for the Taos TSL2560,
+	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called tsl2563.
+
+config TSL4531
+	tristate "TAOS TSL4531 ambient light sensors"
+	depends on I2C
+	help
+	 Say Y here if you want to build a driver for the TAOS TSL4531 family
+	 of ambient light sensors with direct lux output.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called tsl4531.
+
+config VCNL4000
+	tristate "VCNL4000 combined ALS and proximity sensor"
+	depends on I2C
+	help
+	 Say Y here if you want to build a driver for the Vishay VCNL4000
+	 combined ambient light and proximity sensor.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called vcnl4000.
+
+endmenu