Initial import

1 files changed, 1500 insertions, 0 deletions

diff --git a/drivers/media/tuners/xc5000.c b/drivers/media/tuners/xc5000.c
new file mode 100644
index 000000000..4f3602a54
--- /dev/null
+++ b/drivers/media/tuners/xc5000.c
@@ -0,0 +1,1500 @@
+/*
+ *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
+ *
+ *  Copyright (c) 2007 Xceive Corporation
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ *  Copyright (c) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "xc5000.h"
+#include "tuner-i2c.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+static int no_poweroff;
+module_param(no_poweroff, int, 0644);
+MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n"
+	"\t\t1 keep device energized and with tuner ready all the times.\n"
+	"\t\tFaster, but consumes more power and keeps the device hotter");
+
+static DEFINE_MUTEX(xc5000_list_mutex);
+static LIST_HEAD(hybrid_tuner_instance_list);
+
+#define dprintk(level, fmt, arg...) if (debug >= level) \
+	printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
+
+struct xc5000_priv {
+	struct tuner_i2c_props i2c_props;
+	struct list_head hybrid_tuner_instance_list;
+
+	u32 if_khz;
+	u16 xtal_khz;
+	u32 freq_hz, freq_offset;
+	u32 bandwidth;
+	u8  video_standard;
+	unsigned int mode;
+	u8  rf_mode;
+	u8  radio_input;
+	u16  output_amp;
+
+	int chip_id;
+	u16 pll_register_no;
+	u8 init_status_supported;
+	u8 fw_checksum_supported;
+
+	struct dvb_frontend *fe;
+	struct delayed_work timer_sleep;
+
+	const struct firmware   *firmware;
+};
+
+/* Misc Defines */
+#define MAX_TV_STANDARD			24
+#define XC_MAX_I2C_WRITE_LENGTH		64
+
+/* Time to suspend after the .sleep callback is called */
+#define XC5000_SLEEP_TIME		5000 /* ms */
+
+/* Signal Types */
+#define XC_RF_MODE_AIR			0
+#define XC_RF_MODE_CABLE		1
+
+/* Product id */
+#define XC_PRODUCT_ID_FW_NOT_LOADED	0x2000
+#define XC_PRODUCT_ID_FW_LOADED	0x1388
+
+/* Registers */
+#define XREG_INIT         0x00
+#define XREG_VIDEO_MODE   0x01
+#define XREG_AUDIO_MODE   0x02
+#define XREG_RF_FREQ      0x03
+#define XREG_D_CODE       0x04
+#define XREG_IF_OUT       0x05
+#define XREG_SEEK_MODE    0x07
+#define XREG_POWER_DOWN   0x0A /* Obsolete */
+/* Set the output amplitude - SIF for analog, DTVP/DTVN for digital */
+#define XREG_OUTPUT_AMP   0x0B
+#define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */
+#define XREG_SMOOTHEDCVBS 0x0E
+#define XREG_XTALFREQ     0x0F
+#define XREG_FINERFREQ    0x10
+#define XREG_DDIMODE      0x11
+
+#define XREG_ADC_ENV      0x00
+#define XREG_QUALITY      0x01
+#define XREG_FRAME_LINES  0x02
+#define XREG_HSYNC_FREQ   0x03
+#define XREG_LOCK         0x04
+#define XREG_FREQ_ERROR   0x05
+#define XREG_SNR          0x06
+#define XREG_VERSION      0x07
+#define XREG_PRODUCT_ID   0x08
+#define XREG_BUSY         0x09
+#define XREG_BUILD        0x0D
+#define XREG_TOTALGAIN    0x0F
+#define XREG_FW_CHECKSUM  0x12
+#define XREG_INIT_STATUS  0x13
+
+/*
+   Basic firmware description. This will remain with
+   the driver for documentation purposes.
+
+   This represents an I2C firmware file encoded as a
+   string of unsigned char. Format is as follows:
+
+   char[0  ]=len0_MSB  -> len = len_MSB * 256 + len_LSB
+   char[1  ]=len0_LSB  -> length of first write transaction
+   char[2  ]=data0 -> first byte to be sent
+   char[3  ]=data1
+   char[4  ]=data2
+   char[   ]=...
+   char[M  ]=dataN  -> last byte to be sent
+   char[M+1]=len1_MSB  -> len = len_MSB * 256 + len_LSB
+   char[M+2]=len1_LSB  -> length of second write transaction
+   char[M+3]=data0
+   char[M+4]=data1
+   ...
+   etc.
+
+   The [len] value should be interpreted as follows:
+
+   len= len_MSB _ len_LSB
+   len=1111_1111_1111_1111   : End of I2C_SEQUENCE
+   len=0000_0000_0000_0000   : Reset command: Do hardware reset
+   len=0NNN_NNNN_NNNN_NNNN   : Normal transaction: number of bytes = {1:32767)
+   len=1WWW_WWWW_WWWW_WWWW   : Wait command: wait for {1:32767} ms
+
+   For the RESET and WAIT commands, the two following bytes will contain
+   immediately the length of the following transaction.
+
+*/
+struct XC_TV_STANDARD {
+	char *name;
+	u16 audio_mode;
+	u16 video_mode;
+};
+
+/* Tuner standards */
+#define MN_NTSC_PAL_BTSC	0
+#define MN_NTSC_PAL_A2		1
+#define MN_NTSC_PAL_EIAJ	2
+#define MN_NTSC_PAL_MONO	3
+#define BG_PAL_A2		4
+#define BG_PAL_NICAM		5
+#define BG_PAL_MONO		6
+#define I_PAL_NICAM		7
+#define I_PAL_NICAM_MONO	8
+#define DK_PAL_A2		9
+#define DK_PAL_NICAM		10
+#define DK_PAL_MONO		11
+#define DK_SECAM_A2DK1		12
+#define DK_SECAM_A2LDK3		13
+#define DK_SECAM_A2MONO		14
+#define L_SECAM_NICAM		15
+#define LC_SECAM_NICAM		16
+#define DTV6			17
+#define DTV8			18
+#define DTV7_8			19
+#define DTV7			20
+#define FM_RADIO_INPUT2		21
+#define FM_RADIO_INPUT1		22
+#define FM_RADIO_INPUT1_MONO	23
+
+static struct XC_TV_STANDARD xc5000_standard[MAX_TV_STANDARD] = {
+	{"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020},
+	{"M/N-NTSC/PAL-A2",   0x0600, 0x8020},
+	{"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020},
+	{"M/N-NTSC/PAL-Mono", 0x0478, 0x8020},
+	{"B/G-PAL-A2",        0x0A00, 0x8049},
+	{"B/G-PAL-NICAM",     0x0C04, 0x8049},
+	{"B/G-PAL-MONO",      0x0878, 0x8059},
+	{"I-PAL-NICAM",       0x1080, 0x8009},
+	{"I-PAL-NICAM-MONO",  0x0E78, 0x8009},
+	{"D/K-PAL-A2",        0x1600, 0x8009},
+	{"D/K-PAL-NICAM",     0x0E80, 0x8009},
+	{"D/K-PAL-MONO",      0x1478, 0x8009},
+	{"D/K-SECAM-A2 DK1",  0x1200, 0x8009},
+	{"D/K-SECAM-A2 L/DK3", 0x0E00, 0x8009},
+	{"D/K-SECAM-A2 MONO", 0x1478, 0x8009},
+	{"L-SECAM-NICAM",     0x8E82, 0x0009},
+	{"L'-SECAM-NICAM",    0x8E82, 0x4009},
+	{"DTV6",              0x00C0, 0x8002},
+	{"DTV8",              0x00C0, 0x800B},
+	{"DTV7/8",            0x00C0, 0x801B},
+	{"DTV7",              0x00C0, 0x8007},
+	{"FM Radio-INPUT2",   0x9802, 0x9002},
+	{"FM Radio-INPUT1",   0x0208, 0x9002},
+	{"FM Radio-INPUT1_MONO", 0x0278, 0x9002}
+};
+
+
+struct xc5000_fw_cfg {
+	char *name;
+	u16 size;
+	u16 pll_reg;
+	u8 init_status_supported;
+	u8 fw_checksum_supported;
+};
+
+#define XC5000A_FIRMWARE "/*(DEBLOBBED)*/"
+static const struct xc5000_fw_cfg xc5000a_1_6_114 = {
+	.name = XC5000A_FIRMWARE,
+	.size = 12401,
+	.pll_reg = 0x806c,
+};
+
+#define XC5000C_FIRMWARE "/*(DEBLOBBED)*/"
+static const struct xc5000_fw_cfg xc5000c_41_024_5 = {
+	.name = XC5000C_FIRMWARE,
+	.size = 16497,
+	.pll_reg = 0x13,
+	.init_status_supported = 1,
+	.fw_checksum_supported = 1,
+};
+
+static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
+{
+	switch (chip_id) {
+	default:
+	case XC5000A:
+		return &xc5000a_1_6_114;
+	case XC5000C:
+		return &xc5000c_41_024_5;
+	}
+}
+
+static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force);
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe);
+static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val);
+static int xc5000_tuner_reset(struct dvb_frontend *fe);
+
+static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
+{
+	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
+			       .flags = 0, .buf = buf, .len = len };
+
+	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
+		printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+#if 0
+/* This routine is never used because the only time we read data from the
+   i2c bus is when we read registers, and we want that to be an atomic i2c
+   transaction in case we are on a multi-master bus */
+static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
+{
+	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
+		.flags = I2C_M_RD, .buf = buf, .len = len };
+
+	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
+		printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", len);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+#endif
+
+static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
+{
+	u8 buf[2] = { reg >> 8, reg & 0xff };
+	u8 bval[2] = { 0, 0 };
+	struct i2c_msg msg[2] = {
+		{ .addr = priv->i2c_props.addr,
+			.flags = 0, .buf = &buf[0], .len = 2 },
+		{ .addr = priv->i2c_props.addr,
+			.flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
+	};
+
+	if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
+		printk(KERN_WARNING "xc5000: I2C read failed\n");
+		return -EREMOTEIO;
+	}
+
+	*val = (bval[0] << 8) | bval[1];
+	return 0;
+}
+
+static int xc5000_tuner_reset(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	int ret;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (fe->callback) {
+		ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
+					   fe->dvb->priv :
+					   priv->i2c_props.adap->algo_data,
+					   DVB_FRONTEND_COMPONENT_TUNER,
+					   XC5000_TUNER_RESET, 0);
+		if (ret) {
+			printk(KERN_ERR "xc5000: reset failed\n");
+			return ret;
+		}
+	} else {
+		printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int xc_write_reg(struct xc5000_priv *priv, u16 reg_addr, u16 i2c_data)
+{
+	u8 buf[4];
+	int watch_dog_timer = 100;
+	int result;
+
+	buf[0] = (reg_addr >> 8) & 0xFF;
+	buf[1] = reg_addr & 0xFF;
+	buf[2] = (i2c_data >> 8) & 0xFF;
+	buf[3] = i2c_data & 0xFF;
+	result = xc_send_i2c_data(priv, buf, 4);
+	if (result == 0) {
+		/* wait for busy flag to clear */
+		while ((watch_dog_timer > 0) && (result == 0)) {
+			result = xc5000_readreg(priv, XREG_BUSY, (u16 *)buf);
+			if (result == 0) {
+				if ((buf[0] == 0) && (buf[1] == 0)) {
+					/* busy flag cleared */
+					break;
+				} else {
+					msleep(5); /* wait 5 ms */
+					watch_dog_timer--;
+				}
+			}
+		}
+	}
+	if (watch_dog_timer <= 0)
+		result = -EREMOTEIO;
+
+	return result;
+}
+
+static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+
+	int i, nbytes_to_send, result;
+	unsigned int len, pos, index;
+	u8 buf[XC_MAX_I2C_WRITE_LENGTH];
+
+	index = 0;
+	while ((i2c_sequence[index] != 0xFF) ||
+		(i2c_sequence[index + 1] != 0xFF)) {
+		len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
+		if (len == 0x0000) {
+			/* RESET command */
+			result = xc5000_tuner_reset(fe);
+			index += 2;
+			if (result != 0)
+				return result;
+		} else if (len & 0x8000) {
+			/* WAIT command */
+			msleep(len & 0x7FFF);
+			index += 2;
+		} else {
+			/* Send i2c data whilst ensuring individual transactions
+			 * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
+			 */
+			index += 2;
+			buf[0] = i2c_sequence[index];
+			buf[1] = i2c_sequence[index + 1];
+			pos = 2;
+			while (pos < len) {
+				if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2)
+					nbytes_to_send =
+						XC_MAX_I2C_WRITE_LENGTH;
+				else
+					nbytes_to_send = (len - pos + 2);
+				for (i = 2; i < nbytes_to_send; i++) {
+					buf[i] = i2c_sequence[index + pos +
+						i - 2];
+				}
+				result = xc_send_i2c_data(priv, buf,
+					nbytes_to_send);
+
+				if (result != 0)
+					return result;
+
+				pos += nbytes_to_send - 2;
+			}
+			index += len;
+		}
+	}
+	return 0;
+}
+
+static int xc_initialize(struct xc5000_priv *priv)
+{
+	dprintk(1, "%s()\n", __func__);
+	return xc_write_reg(priv, XREG_INIT, 0);
+}
+
+static int xc_set_tv_standard(struct xc5000_priv *priv,
+	u16 video_mode, u16 audio_mode, u8 radio_mode)
+{
+	int ret;
+	dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, video_mode, audio_mode);
+	if (radio_mode) {
+		dprintk(1, "%s() Standard = %s\n",
+			__func__,
+			xc5000_standard[radio_mode].name);
+	} else {
+		dprintk(1, "%s() Standard = %s\n",
+			__func__,
+			xc5000_standard[priv->video_standard].name);
+	}
+
+	ret = xc_write_reg(priv, XREG_VIDEO_MODE, video_mode);
+	if (ret == 0)
+		ret = xc_write_reg(priv, XREG_AUDIO_MODE, audio_mode);
+
+	return ret;
+}
+
+static int xc_set_signal_source(struct xc5000_priv *priv, u16 rf_mode)
+{
+	dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
+		rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
+
+	if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) {
+		rf_mode = XC_RF_MODE_CABLE;
+		printk(KERN_ERR
+			"%s(), Invalid mode, defaulting to CABLE",
+			__func__);
+	}
+	return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
+}
+
+static const struct dvb_tuner_ops xc5000_tuner_ops;
+
+static int xc_set_rf_frequency(struct xc5000_priv *priv, u32 freq_hz)
+{
+	u16 freq_code;
+
+	dprintk(1, "%s(%u)\n", __func__, freq_hz);
+
+	if ((freq_hz > xc5000_tuner_ops.info.frequency_max) ||
+		(freq_hz < xc5000_tuner_ops.info.frequency_min))
+		return -EINVAL;
+
+	freq_code = (u16)(freq_hz / 15625);
+
+	/* Starting in firmware version 1.1.44, Xceive recommends using the
+	   FINERFREQ for all normal tuning (the doc indicates reg 0x03 should
+	   only be used for fast scanning for channel lock) */
+	return xc_write_reg(priv, XREG_FINERFREQ, freq_code);
+}
+
+
+static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz)
+{
+	u32 freq_code = (freq_khz * 1024)/1000;
+	dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n",
+		__func__, freq_khz, freq_code);
+
+	return xc_write_reg(priv, XREG_IF_OUT, freq_code);
+}
+
+
+static int xc_get_adc_envelope(struct xc5000_priv *priv, u16 *adc_envelope)
+{
+	return xc5000_readreg(priv, XREG_ADC_ENV, adc_envelope);
+}
+
+static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
+{
+	int result;
+	u16 reg_data;
+	u32 tmp;
+
+	result = xc5000_readreg(priv, XREG_FREQ_ERROR, &reg_data);
+	if (result != 0)
+		return result;
+
+	tmp = (u32)reg_data;
+	(*freq_error_hz) = (tmp * 15625) / 1000;
+	return result;
+}
+
+static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status)
+{
+	return xc5000_readreg(priv, XREG_LOCK, lock_status);
+}
+
+static int xc_get_version(struct xc5000_priv *priv,
+	u8 *hw_majorversion, u8 *hw_minorversion,
+	u8 *fw_majorversion, u8 *fw_minorversion)
+{
+	u16 data;
+	int result;
+
+	result = xc5000_readreg(priv, XREG_VERSION, &data);
+	if (result != 0)
+		return result;
+
+	(*hw_majorversion) = (data >> 12) & 0x0F;
+	(*hw_minorversion) = (data >>  8) & 0x0F;
+	(*fw_majorversion) = (data >>  4) & 0x0F;
+	(*fw_minorversion) = data & 0x0F;
+
+	return 0;
+}
+
+static int xc_get_buildversion(struct xc5000_priv *priv, u16 *buildrev)
+{
+	return xc5000_readreg(priv, XREG_BUILD, buildrev);
+}
+
+static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
+{
+	u16 reg_data;
+	int result;
+
+	result = xc5000_readreg(priv, XREG_HSYNC_FREQ, &reg_data);
+	if (result != 0)
+		return result;
+
+	(*hsync_freq_hz) = ((reg_data & 0x0fff) * 763)/100;
+	return result;
+}
+
+static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines)
+{
+	return xc5000_readreg(priv, XREG_FRAME_LINES, frame_lines);
+}
+
+static int xc_get_quality(struct xc5000_priv *priv, u16 *quality)
+{
+	return xc5000_readreg(priv, XREG_QUALITY, quality);
+}
+
+static int xc_get_analogsnr(struct xc5000_priv *priv, u16 *snr)
+{
+	return xc5000_readreg(priv, XREG_SNR, snr);
+}
+
+static int xc_get_totalgain(struct xc5000_priv *priv, u16 *totalgain)
+{
+	return xc5000_readreg(priv, XREG_TOTALGAIN, totalgain);
+}
+
+static u16 wait_for_lock(struct xc5000_priv *priv)
+{
+	u16 lock_state = 0;
+	int watch_dog_count = 40;
+
+	while ((lock_state == 0) && (watch_dog_count > 0)) {
+		xc_get_lock_status(priv, &lock_state);
+		if (lock_state != 1) {
+			msleep(5);
+			watch_dog_count--;
+		}
+	}
+	return lock_state;
+}
+
+#define XC_TUNE_ANALOG  0
+#define XC_TUNE_DIGITAL 1
+static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
+{
+	int found = 0;
+
+	dprintk(1, "%s(%u)\n", __func__, freq_hz);
+
+	if (xc_set_rf_frequency(priv, freq_hz) != 0)
+		return 0;
+
+	if (mode == XC_TUNE_ANALOG) {
+		if (wait_for_lock(priv) == 1)
+			found = 1;
+	}
+
+	return found;
+}
+
+static int xc_set_xtal(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	int ret = 0;
+
+	switch (priv->chip_id) {
+	default:
+	case XC5000A:
+		/* 32.000 MHz xtal is default */
+		break;
+	case XC5000C:
+		switch (priv->xtal_khz) {
+		default:
+		case 32000:
+			/* 32.000 MHz xtal is default */
+			break;
+		case 31875:
+			/* 31.875 MHz xtal configuration */
+			ret = xc_write_reg(priv, 0x000f, 0x8081);
+			break;
+		}
+		break;
+	}
+	return ret;
+}
+
+static int xc5000_fwupload(struct dvb_frontend *fe,
+			   const struct xc5000_fw_cfg *desired_fw,
+			   const struct firmware *fw)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	int ret;
+
+	/* request the firmware, this will block and timeout */
+	dprintk(1, "waiting for firmware upload (%s)...\n",
+		desired_fw->name);
+
+	priv->pll_register_no = desired_fw->pll_reg;
+	priv->init_status_supported = desired_fw->init_status_supported;
+	priv->fw_checksum_supported = desired_fw->fw_checksum_supported;
+
+
+	dprintk(1, "firmware uploading...\n");
+	ret = xc_load_i2c_sequence(fe,  fw->data);
+	if (!ret) {
+		ret = xc_set_xtal(fe);
+		dprintk(1, "Firmware upload complete...\n");
+	} else
+		printk(KERN_ERR "xc5000: firmware upload failed...\n");
+
+	return ret;
+}
+
+static void xc_debug_dump(struct xc5000_priv *priv)
+{
+	u16 adc_envelope;
+	u32 freq_error_hz = 0;
+	u16 lock_status;
+	u32 hsync_freq_hz = 0;
+	u16 frame_lines;
+	u16 quality;
+	u16 snr;
+	u16 totalgain;
+	u8 hw_majorversion = 0, hw_minorversion = 0;
+	u8 fw_majorversion = 0, fw_minorversion = 0;
+	u16 fw_buildversion = 0;
+	u16 regval;
+
+	/* Wait for stats to stabilize.
+	 * Frame Lines needs two frame times after initial lock
+	 * before it is valid.
+	 */
+	msleep(100);
+
+	xc_get_adc_envelope(priv,  &adc_envelope);
+	dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
+
+	xc_get_frequency_error(priv, &freq_error_hz);
+	dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
+
+	xc_get_lock_status(priv,  &lock_status);
+	dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
+		lock_status);
+
+	xc_get_version(priv,  &hw_majorversion, &hw_minorversion,
+		&fw_majorversion, &fw_minorversion);
+	xc_get_buildversion(priv,  &fw_buildversion);
+	dprintk(1, "*** HW: V%d.%d, FW: V %d.%d.%d\n",
+		hw_majorversion, hw_minorversion,
+		fw_majorversion, fw_minorversion, fw_buildversion);
+
+	xc_get_hsync_freq(priv,  &hsync_freq_hz);
+	dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);
+
+	xc_get_frame_lines(priv,  &frame_lines);
+	dprintk(1, "*** Frame lines = %d\n", frame_lines);
+
+	xc_get_quality(priv,  &quality);
+	dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality & 0x07);
+
+	xc_get_analogsnr(priv,  &snr);
+	dprintk(1, "*** Unweighted analog SNR = %d dB\n", snr & 0x3f);
+
+	xc_get_totalgain(priv,  &totalgain);
+	dprintk(1, "*** Total gain = %d.%d dB\n", totalgain / 256,
+		(totalgain % 256) * 100 / 256);
+
+	if (priv->pll_register_no) {
+		xc5000_readreg(priv, priv->pll_register_no, &regval);
+		dprintk(1, "*** PLL lock status = 0x%04x\n", regval);
+	}
+}
+
+static int xc5000_tune_digital(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	int ret;
+	u32 bw = fe->dtv_property_cache.bandwidth_hz;
+
+	ret = xc_set_signal_source(priv, priv->rf_mode);
+	if (ret != 0) {
+		printk(KERN_ERR
+			"xc5000: xc_set_signal_source(%d) failed\n",
+			priv->rf_mode);
+		return -EREMOTEIO;
+	}
+
+	ret = xc_set_tv_standard(priv,
+		xc5000_standard[priv->video_standard].video_mode,
+		xc5000_standard[priv->video_standard].audio_mode, 0);
+	if (ret != 0) {
+		printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n");
+		return -EREMOTEIO;
+	}
+
+	ret = xc_set_IF_frequency(priv, priv->if_khz);
+	if (ret != 0) {
+		printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
+		       priv->if_khz);
+		return -EIO;
+	}
+
+	dprintk(1, "%s() setting OUTPUT_AMP to 0x%x\n",
+		__func__, priv->output_amp);
+	xc_write_reg(priv, XREG_OUTPUT_AMP, priv->output_amp);
+
+	xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL);
+
+	if (debug)
+		xc_debug_dump(priv);
+
+	priv->bandwidth = bw;
+
+	return 0;
+}
+
+static int xc5000_set_digital_params(struct dvb_frontend *fe)
+{
+	int b;
+	struct xc5000_priv *priv = fe->tuner_priv;
+	u32 bw = fe->dtv_property_cache.bandwidth_hz;
+	u32 freq = fe->dtv_property_cache.frequency;
+	u32 delsys  = fe->dtv_property_cache.delivery_system;
+
+	if (xc_load_fw_and_init_tuner(fe, 0) != 0) {
+		dprintk(1, "Unable to load firmware and init tuner\n");
+		return -EINVAL;
+	}
+
+	dprintk(1, "%s() frequency=%d (Hz)\n", __func__, freq);
+
+	switch (delsys) {
+	case SYS_ATSC:
+		dprintk(1, "%s() VSB modulation\n", __func__);
+		priv->rf_mode = XC_RF_MODE_AIR;
+		priv->freq_offset = 1750000;
+		priv->video_standard = DTV6;
+		break;
+	case SYS_DVBC_ANNEX_B:
+		dprintk(1, "%s() QAM modulation\n", __func__);
+		priv->rf_mode = XC_RF_MODE_CABLE;
+		priv->freq_offset = 1750000;
+		priv->video_standard = DTV6;
+		break;
+	case SYS_ISDBT:
+		/* All ISDB-T are currently for 6 MHz bw */
+		if (!bw)
+			bw = 6000000;
+		/* fall to OFDM handling */
+	case SYS_DMBTH:
+	case SYS_DVBT:
+	case SYS_DVBT2:
+		dprintk(1, "%s() OFDM\n", __func__);
+		switch (bw) {
+		case 6000000:
+			priv->video_standard = DTV6;
+			priv->freq_offset = 1750000;
+			break;
+		case 7000000:
+			priv->video_standard = DTV7;
+			priv->freq_offset = 2250000;
+			break;
+		case 8000000:
+			priv->video_standard = DTV8;
+			priv->freq_offset = 2750000;
+			break;
+		default:
+			printk(KERN_ERR "xc5000 bandwidth not set!\n");
+			return -EINVAL;
+		}
+		priv->rf_mode = XC_RF_MODE_AIR;
+		break;
+	case SYS_DVBC_ANNEX_A:
+	case SYS_DVBC_ANNEX_C:
+		dprintk(1, "%s() QAM modulation\n", __func__);
+		priv->rf_mode = XC_RF_MODE_CABLE;
+		if (bw <= 6000000) {
+			priv->video_standard = DTV6;
+			priv->freq_offset = 1750000;
+			b = 6;
+		} else if (bw <= 7000000) {
+			priv->video_standard = DTV7;
+			priv->freq_offset = 2250000;
+			b = 7;
+		} else {
+			priv->video_standard = DTV7_8;
+			priv->freq_offset = 2750000;
+			b = 8;
+		}
+		dprintk(1, "%s() Bandwidth %dMHz (%d)\n", __func__,
+			b, bw);
+		break;
+	default:
+		printk(KERN_ERR "xc5000: delivery system is not supported!\n");
+		return -EINVAL;
+	}
+
+	priv->freq_hz = freq - priv->freq_offset;
+	priv->mode = V4L2_TUNER_DIGITAL_TV;
+
+	dprintk(1, "%s() frequency=%d (compensated to %d)\n",
+		__func__, freq, priv->freq_hz);
+
+	return xc5000_tune_digital(fe);
+}
+
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	int ret;
+	u16 id;
+
+	ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
+	if (ret == 0) {
+		if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
+			ret = -ENOENT;
+		else
+			ret = 0;
+	}
+
+	dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
+		ret == 0 ? "True" : "False", id);
+	return ret;
+}
+
+static void xc5000_config_tv(struct dvb_frontend *fe,
+			     struct analog_parameters *params)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+
+	dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
+		__func__, params->frequency);
+
+	/* Fix me: it could be air. */
+	priv->rf_mode = params->mode;
+	if (params->mode > XC_RF_MODE_CABLE)
+		priv->rf_mode = XC_RF_MODE_CABLE;
+
+	/* params->frequency is in units of 62.5khz */
+	priv->freq_hz = params->frequency * 62500;
+
+	/* FIX ME: Some video standards may have several possible audio
+		   standards. We simply default to one of them here.
+	 */
+	if (params->std & V4L2_STD_MN) {
+		/* default to BTSC audio standard */
+		priv->video_standard = MN_NTSC_PAL_BTSC;
+		return;
+	}
+
+	if (params->std & V4L2_STD_PAL_BG) {
+		/* default to NICAM audio standard */
+		priv->video_standard = BG_PAL_NICAM;
+		return;
+	}
+
+	if (params->std & V4L2_STD_PAL_I) {
+		/* default to NICAM audio standard */
+		priv->video_standard = I_PAL_NICAM;
+		return;
+	}
+
+	if (params->std & V4L2_STD_PAL_DK) {
+		/* default to NICAM audio standard */
+		priv->video_standard = DK_PAL_NICAM;
+		return;
+	}
+
+	if (params->std & V4L2_STD_SECAM_DK) {
+		/* default to A2 DK1 audio standard */
+		priv->video_standard = DK_SECAM_A2DK1;
+		return;
+	}
+
+	if (params->std & V4L2_STD_SECAM_L) {
+		priv->video_standard = L_SECAM_NICAM;
+		return;
+	}
+
+	if (params->std & V4L2_STD_SECAM_LC) {
+		priv->video_standard = LC_SECAM_NICAM;
+		return;
+	}
+}
+
+static int xc5000_set_tv_freq(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	u16 pll_lock_status;
+	int ret;
+
+tune_channel:
+	ret = xc_set_signal_source(priv, priv->rf_mode);
+	if (ret != 0) {
+		printk(KERN_ERR
+			"xc5000: xc_set_signal_source(%d) failed\n",
+			priv->rf_mode);
+		return -EREMOTEIO;
+	}
+
+	ret = xc_set_tv_standard(priv,
+		xc5000_standard[priv->video_standard].video_mode,
+		xc5000_standard[priv->video_standard].audio_mode, 0);
+	if (ret != 0) {
+		printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n");
+		return -EREMOTEIO;
+	}
+
+	xc_write_reg(priv, XREG_OUTPUT_AMP, 0x09);
+
+	xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
+
+	if (debug)
+		xc_debug_dump(priv);
+
+	if (priv->pll_register_no != 0) {
+		msleep(20);
+		xc5000_readreg(priv, priv->pll_register_no, &pll_lock_status);
+		if (pll_lock_status > 63) {
+			/* PLL is unlocked, force reload of the firmware */
+			dprintk(1, "xc5000: PLL not locked (0x%x).  Reloading...\n",
+				pll_lock_status);
+			if (xc_load_fw_and_init_tuner(fe, 1) != 0) {
+				printk(KERN_ERR "xc5000: Unable to reload fw\n");
+				return -EREMOTEIO;
+			}
+			goto tune_channel;
+		}
+	}
+
+	return 0;
+}
+
+static int xc5000_config_radio(struct dvb_frontend *fe,
+			       struct analog_parameters *params)
+
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+
+	dprintk(1, "%s() frequency=%d (in units of khz)\n",
+		__func__, params->frequency);
+
+	if (priv->radio_input == XC5000_RADIO_NOT_CONFIGURED) {
+		dprintk(1, "%s() radio input not configured\n", __func__);
+		return -EINVAL;
+	}
+
+	priv->freq_hz = params->frequency * 125 / 2;
+	priv->rf_mode = XC_RF_MODE_AIR;
+
+	return 0;
+}
+
+static int xc5000_set_radio_freq(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	int ret;
+	u8 radio_input;
+
+	if (priv->radio_input == XC5000_RADIO_FM1)
+		radio_input = FM_RADIO_INPUT1;
+	else if  (priv->radio_input == XC5000_RADIO_FM2)
+		radio_input = FM_RADIO_INPUT2;
+	else if  (priv->radio_input == XC5000_RADIO_FM1_MONO)
+		radio_input = FM_RADIO_INPUT1_MONO;
+	else {
+		dprintk(1, "%s() unknown radio input %d\n", __func__,
+			priv->radio_input);
+		return -EINVAL;
+	}
+
+	ret = xc_set_tv_standard(priv, xc5000_standard[radio_input].video_mode,
+			       xc5000_standard[radio_input].audio_mode, radio_input);
+
+	if (ret != 0) {
+		printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n");
+		return -EREMOTEIO;
+	}
+
+	ret = xc_set_signal_source(priv, priv->rf_mode);
+	if (ret != 0) {
+		printk(KERN_ERR
+			"xc5000: xc_set_signal_source(%d) failed\n",
+			priv->rf_mode);
+		return -EREMOTEIO;
+	}
+
+	if ((priv->radio_input == XC5000_RADIO_FM1) ||
+				(priv->radio_input == XC5000_RADIO_FM2))
+		xc_write_reg(priv, XREG_OUTPUT_AMP, 0x09);
+	else if  (priv->radio_input == XC5000_RADIO_FM1_MONO)
+		xc_write_reg(priv, XREG_OUTPUT_AMP, 0x06);
+
+	xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
+
+	return 0;
+}
+
+static int xc5000_set_params(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+
+	if (xc_load_fw_and_init_tuner(fe, 0) != 0) {
+		dprintk(1, "Unable to load firmware and init tuner\n");
+		return -EINVAL;
+	}
+
+	switch (priv->mode) {
+	case V4L2_TUNER_RADIO:
+		return xc5000_set_radio_freq(fe);
+	case V4L2_TUNER_ANALOG_TV:
+		return xc5000_set_tv_freq(fe);
+	case V4L2_TUNER_DIGITAL_TV:
+		return xc5000_tune_digital(fe);
+	}
+
+	return 0;
+}
+
+static int xc5000_set_analog_params(struct dvb_frontend *fe,
+			     struct analog_parameters *params)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	int ret;
+
+	if (priv->i2c_props.adap == NULL)
+		return -EINVAL;
+
+	switch (params->mode) {
+	case V4L2_TUNER_RADIO:
+		ret = xc5000_config_radio(fe, params);
+		if (ret)
+			return ret;
+		break;
+	case V4L2_TUNER_ANALOG_TV:
+		xc5000_config_tv(fe, params);
+		break;
+	default:
+		break;
+	}
+	priv->mode = params->mode;
+
+	return xc5000_set_params(fe);
+}
+
+static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	dprintk(1, "%s()\n", __func__);
+	*freq = priv->freq_hz + priv->freq_offset;
+	return 0;
+}
+
+static int xc5000_get_if_frequency(struct dvb_frontend *fe, u32 *freq)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	dprintk(1, "%s()\n", __func__);
+	*freq = priv->if_khz * 1000;
+	return 0;
+}
+
+static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	dprintk(1, "%s()\n", __func__);
+
+	*bw = priv->bandwidth;
+	return 0;
+}
+
+static int xc5000_get_status(struct dvb_frontend *fe, u32 *status)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	u16 lock_status = 0;
+
+	xc_get_lock_status(priv, &lock_status);
+
+	dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);
+
+	*status = lock_status;
+
+	return 0;
+}
+
+static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	const struct xc5000_fw_cfg *desired_fw = xc5000_assign_firmware(priv->chip_id);
+	const struct firmware *fw;
+	int ret, i;
+	u16 pll_lock_status;
+	u16 fw_ck;
+
+	cancel_delayed_work(&priv->timer_sleep);
+
+	if (!force && xc5000_is_firmware_loaded(fe) == 0)
+		return 0;
+
+	if (!priv->firmware) {
+		ret = reject_firmware(&fw, desired_fw->name,
+					priv->i2c_props.adap->dev.parent);
+		if (ret) {
+			pr_err("xc5000: Upload failed. rc %d\n", ret);
+			return ret;
+		}
+		dprintk(1, "firmware read %Zu bytes.\n", fw->size);
+
+		if (fw->size != desired_fw->size) {
+			pr_err("xc5000: Firmware file with incorrect size\n");
+			release_firmware(fw);
+			return -EINVAL;
+		}
+		priv->firmware = fw;
+	} else
+		fw = priv->firmware;
+
+	/* Try up to 5 times to load firmware */
+	for (i = 0; i < 5; i++) {
+		if (i)
+			printk(KERN_CONT " - retrying to upload firmware.\n");
+
+		ret = xc5000_fwupload(fe, desired_fw, fw);
+		if (ret != 0)
+			goto err;
+
+		msleep(20);
+
+		if (priv->fw_checksum_supported) {
+			if (xc5000_readreg(priv, XREG_FW_CHECKSUM, &fw_ck)) {
+				printk(KERN_ERR
+				       "xc5000: FW checksum reading failed.");
+				continue;
+			}
+
+			if (!fw_ck) {
+				printk(KERN_ERR
+				       "xc5000: FW checksum failed = 0x%04x.",
+				       fw_ck);
+				continue;
+			}
+		}
+
+		/* Start the tuner self-calibration process */
+		ret = xc_initialize(priv);
+		if (ret) {
+			printk(KERN_ERR
+			       "xc5000: Can't request Self-callibration.");
+			continue;
+		}
+
+		/* Wait for calibration to complete.
+		 * We could continue but XC5000 will clock stretch subsequent
+		 * I2C transactions until calibration is complete.  This way we
+		 * don't have to rely on clock stretching working.
+		 */
+		msleep(100);
+
+		if (priv->init_status_supported) {
+			if (xc5000_readreg(priv, XREG_INIT_STATUS, &fw_ck)) {
+				printk(KERN_ERR
+				       "xc5000: FW failed reading init status.");
+				continue;
+			}
+
+			if (!fw_ck) {
+				printk(KERN_ERR
+				       "xc5000: FW init status failed = 0x%04x.",
+				       fw_ck);
+				continue;
+			}
+		}
+
+		if (priv->pll_register_no) {
+			xc5000_readreg(priv, priv->pll_register_no,
+				       &pll_lock_status);
+			if (pll_lock_status > 63) {
+				/* PLL is unlocked, force reload of the firmware */
+				printk(KERN_ERR
+				       "xc5000: PLL not running after fwload.");
+				continue;
+			}
+		}
+
+		/* Default to "CABLE" mode */
+		ret = xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
+		if (!ret)
+			break;
+		printk(KERN_ERR "xc5000: can't set to cable mode.");
+	}
+
+err:
+	if (!ret)
+		printk(KERN_INFO "xc5000: Firmware %s loaded and running.\n",
+		       desired_fw->name);
+	else
+		printk(KERN_CONT " - too many retries. Giving up\n");
+
+	return ret;
+}
+
+static void xc5000_do_timer_sleep(struct work_struct *timer_sleep)
+{
+	struct xc5000_priv *priv =container_of(timer_sleep, struct xc5000_priv,
+					       timer_sleep.work);
+	struct dvb_frontend *fe = priv->fe;
+	int ret;
+
+	dprintk(1, "%s()\n", __func__);
+
+	/* According to Xceive technical support, the "powerdown" register
+	   was removed in newer versions of the firmware.  The "supported"
+	   way to sleep the tuner is to pull the reset pin low for 10ms */
+	ret = xc5000_tuner_reset(fe);
+	if (ret != 0)
+		printk(KERN_ERR
+			"xc5000: %s() unable to shutdown tuner\n",
+			__func__);
+}
+
+static int xc5000_sleep(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+
+	dprintk(1, "%s()\n", __func__);
+
+	/* Avoid firmware reload on slow devices */
+	if (no_poweroff)
+		return 0;
+
+	schedule_delayed_work(&priv->timer_sleep,
+			      msecs_to_jiffies(XC5000_SLEEP_TIME));
+
+	return 0;
+}
+
+static int xc5000_suspend(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	int ret;
+
+	dprintk(1, "%s()\n", __func__);
+
+	cancel_delayed_work(&priv->timer_sleep);
+
+	ret = xc5000_tuner_reset(fe);
+	if (ret != 0)
+		printk(KERN_ERR
+			"xc5000: %s() unable to shutdown tuner\n",
+			__func__);
+
+	return 0;
+}
+
+static int xc5000_resume(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+
+	dprintk(1, "%s()\n", __func__);
+
+	/* suspended before firmware is loaded.
+	   Avoid firmware load in resume path. */
+	if (!priv->firmware)
+		return 0;
+
+	return xc5000_set_params(fe);
+}
+
+static int xc5000_init(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	dprintk(1, "%s()\n", __func__);
+
+	if (xc_load_fw_and_init_tuner(fe, 0) != 0) {
+		printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
+		return -EREMOTEIO;
+	}
+
+	if (debug)
+		xc_debug_dump(priv);
+
+	return 0;
+}
+
+static int xc5000_release(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+
+	dprintk(1, "%s()\n", __func__);
+
+	mutex_lock(&xc5000_list_mutex);
+
+	if (priv) {
+		cancel_delayed_work(&priv->timer_sleep);
+		if (priv->firmware) {
+			release_firmware(priv->firmware);
+			priv->firmware = NULL;
+		}
+		hybrid_tuner_release_state(priv);
+	}
+
+	mutex_unlock(&xc5000_list_mutex);
+
+	fe->tuner_priv = NULL;
+
+	return 0;
+}
+
+static int xc5000_set_config(struct dvb_frontend *fe, void *priv_cfg)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	struct xc5000_config *p = priv_cfg;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (p->if_khz)
+		priv->if_khz = p->if_khz;
+
+	if (p->radio_input)
+		priv->radio_input = p->radio_input;
+
+	if (p->output_amp)
+		priv->output_amp = p->output_amp;
+
+	return 0;
+}
+
+
+static const struct dvb_tuner_ops xc5000_tuner_ops = {
+	.info = {
+		.name           = "Xceive XC5000",
+		.frequency_min  =    1000000,
+		.frequency_max  = 1023000000,
+		.frequency_step =      50000,
+	},
+
+	.release	   = xc5000_release,
+	.init		   = xc5000_init,
+	.sleep		   = xc5000_sleep,
+	.suspend	   = xc5000_suspend,
+	.resume		   = xc5000_resume,
+
+	.set_config	   = xc5000_set_config,
+	.set_params	   = xc5000_set_digital_params,
+	.set_analog_params = xc5000_set_analog_params,
+	.get_frequency	   = xc5000_get_frequency,
+	.get_if_frequency  = xc5000_get_if_frequency,
+	.get_bandwidth	   = xc5000_get_bandwidth,
+	.get_status	   = xc5000_get_status
+};
+
+struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
+				   struct i2c_adapter *i2c,
+				   const struct xc5000_config *cfg)
+{
+	struct xc5000_priv *priv = NULL;
+	int instance;
+	u16 id = 0;
+
+	dprintk(1, "%s(%d-%04x)\n", __func__,
+		i2c ? i2c_adapter_id(i2c) : -1,
+		cfg ? cfg->i2c_address : -1);
+
+	mutex_lock(&xc5000_list_mutex);
+
+	instance = hybrid_tuner_request_state(struct xc5000_priv, priv,
+					      hybrid_tuner_instance_list,
+					      i2c, cfg->i2c_address, "xc5000");
+	switch (instance) {
+	case 0:
+		goto fail;
+	case 1:
+		/* new tuner instance */
+		priv->bandwidth = 6000000;
+		fe->tuner_priv = priv;
+		priv->fe = fe;
+		INIT_DELAYED_WORK(&priv->timer_sleep, xc5000_do_timer_sleep);
+		break;
+	default:
+		/* existing tuner instance */
+		fe->tuner_priv = priv;
+		break;
+	}
+
+	if (priv->if_khz == 0) {
+		/* If the IF hasn't been set yet, use the value provided by
+		   the caller (occurs in hybrid devices where the analog
+		   call to xc5000_attach occurs before the digital side) */
+		priv->if_khz = cfg->if_khz;
+	}
+
+	if (priv->xtal_khz == 0)
+		priv->xtal_khz = cfg->xtal_khz;
+
+	if (priv->radio_input == 0)
+		priv->radio_input = cfg->radio_input;
+
+	/* don't override chip id if it's already been set
+	   unless explicitly specified */
+	if ((priv->chip_id == 0) || (cfg->chip_id))
+		/* use default chip id if none specified, set to 0 so
+		   it can be overridden if this is a hybrid driver */
+		priv->chip_id = (cfg->chip_id) ? cfg->chip_id : 0;
+
+	/* don't override output_amp if it's already been set
+	   unless explicitly specified */
+	if ((priv->output_amp == 0) || (cfg->output_amp))
+		/* use default output_amp value if none specified */
+		priv->output_amp = (cfg->output_amp) ? cfg->output_amp : 0x8a;
+
+	/* Check if firmware has been loaded. It is possible that another
+	   instance of the driver has loaded the firmware.
+	 */
+	if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
+		goto fail;
+
+	switch (id) {
+	case XC_PRODUCT_ID_FW_LOADED:
+		printk(KERN_INFO
+			"xc5000: Successfully identified at address 0x%02x\n",
+			cfg->i2c_address);
+		printk(KERN_INFO
+			"xc5000: Firmware has been loaded previously\n");
+		break;
+	case XC_PRODUCT_ID_FW_NOT_LOADED:
+		printk(KERN_INFO
+			"xc5000: Successfully identified at address 0x%02x\n",
+			cfg->i2c_address);
+		printk(KERN_INFO
+			"xc5000: Firmware has not been loaded previously\n");
+		break;
+	default:
+		printk(KERN_ERR
+			"xc5000: Device not found at addr 0x%02x (0x%x)\n",
+			cfg->i2c_address, id);
+		goto fail;
+	}
+
+	mutex_unlock(&xc5000_list_mutex);
+
+	memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops,
+		sizeof(struct dvb_tuner_ops));
+
+	return fe;
+fail:
+	mutex_unlock(&xc5000_list_mutex);
+
+	xc5000_release(fe);
+	return NULL;
+}
+EXPORT_SYMBOL(xc5000_attach);
+
+MODULE_AUTHOR("Steven Toth");
+MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver");
+MODULE_LICENSE("GPL");
+/*(DEBLOBBED)*/