summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ti/tlan.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/net/ethernet/ti/tlan.c
Initial import
Diffstat (limited to 'drivers/net/ethernet/ti/tlan.c')
-rw-r--r--drivers/net/ethernet/ti/tlan.c3293
1 files changed, 3293 insertions, 0 deletions
diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c
new file mode 100644
index 000000000..691ec936e
--- /dev/null
+++ b/drivers/net/ethernet/ti/tlan.c
@@ -0,0 +1,3293 @@
+/*******************************************************************************
+ *
+ * Linux ThunderLAN Driver
+ *
+ * tlan.c
+ * by James Banks
+ *
+ * (C) 1997-1998 Caldera, Inc.
+ * (C) 1998 James Banks
+ * (C) 1999-2001 Torben Mathiasen
+ * (C) 2002 Samuel Chessman
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ ** Useful (if not required) reading:
+ *
+ * Texas Instruments, ThunderLAN Programmer's Guide,
+ * TI Literature Number SPWU013A
+ * available in PDF format from www.ti.com
+ * Level One, LXT901 and LXT970 Data Sheets
+ * available in PDF format from www.level1.com
+ * National Semiconductor, DP83840A Data Sheet
+ * available in PDF format from www.national.com
+ * Microchip Technology, 24C01A/02A/04A Data Sheet
+ * available in PDF format from www.microchip.com
+ *
+ ******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/hardirq.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/eisa.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+
+#include "tlan.h"
+
+
+/* For removing EISA devices */
+static struct net_device *tlan_eisa_devices;
+
+static int tlan_devices_installed;
+
+/* Set speed, duplex and aui settings */
+static int aui[MAX_TLAN_BOARDS];
+static int duplex[MAX_TLAN_BOARDS];
+static int speed[MAX_TLAN_BOARDS];
+static int boards_found;
+module_param_array(aui, int, NULL, 0);
+module_param_array(duplex, int, NULL, 0);
+module_param_array(speed, int, NULL, 0);
+MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
+MODULE_PARM_DESC(duplex,
+ "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
+MODULE_PARM_DESC(speed, "ThunderLAN port speed setting(s) (0,10,100)");
+
+MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
+MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
+MODULE_LICENSE("GPL");
+
+/* Turn on debugging. See Documentation/networking/tlan.txt for details */
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
+
+static const char tlan_signature[] = "TLAN";
+static const char tlan_banner[] = "ThunderLAN driver v1.17\n";
+static int tlan_have_pci;
+static int tlan_have_eisa;
+
+static const char * const media[] = {
+ "10BaseT-HD", "10BaseT-FD", "100baseTx-HD",
+ "100BaseTx-FD", "100BaseT4", NULL
+};
+
+static struct board {
+ const char *device_label;
+ u32 flags;
+ u16 addr_ofs;
+} board_info[] = {
+ { "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+ { "Compaq Netelligent 10/100 TX PCI UTP",
+ TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+ { "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
+ { "Compaq NetFlex-3/P",
+ TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
+ { "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
+ { "Compaq Netelligent Integrated 10/100 TX UTP",
+ TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+ { "Compaq Netelligent Dual 10/100 TX PCI UTP",
+ TLAN_ADAPTER_NONE, 0x83 },
+ { "Compaq Netelligent 10/100 TX Embedded UTP",
+ TLAN_ADAPTER_NONE, 0x83 },
+ { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
+ { "Olicom OC-2325", TLAN_ADAPTER_ACTIVITY_LED |
+ TLAN_ADAPTER_UNMANAGED_PHY, 0xf8 },
+ { "Olicom OC-2326", TLAN_ADAPTER_ACTIVITY_LED |
+ TLAN_ADAPTER_USE_INTERN_10, 0xf8 },
+ { "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+ { "Compaq Netelligent 10 T/2 PCI UTP/coax", TLAN_ADAPTER_NONE, 0x83 },
+ { "Compaq NetFlex-3/E",
+ TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */
+ TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
+ { "Compaq NetFlex-3/E",
+ TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
+};
+
+static const struct pci_device_id tlan_pci_tbl[] = {
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 },
+ { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+ { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
+ { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, tlan_pci_tbl);
+
+static void tlan_eisa_probe(void);
+static void tlan_eisa_cleanup(void);
+static int tlan_init(struct net_device *);
+static int tlan_open(struct net_device *dev);
+static netdev_tx_t tlan_start_tx(struct sk_buff *, struct net_device *);
+static irqreturn_t tlan_handle_interrupt(int, void *);
+static int tlan_close(struct net_device *);
+static struct net_device_stats *tlan_get_stats(struct net_device *);
+static void tlan_set_multicast_list(struct net_device *);
+static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int tlan_probe1(struct pci_dev *pdev, long ioaddr,
+ int irq, int rev, const struct pci_device_id *ent);
+static void tlan_tx_timeout(struct net_device *dev);
+static void tlan_tx_timeout_work(struct work_struct *work);
+static int tlan_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+
+static u32 tlan_handle_tx_eof(struct net_device *, u16);
+static u32 tlan_handle_stat_overflow(struct net_device *, u16);
+static u32 tlan_handle_rx_eof(struct net_device *, u16);
+static u32 tlan_handle_dummy(struct net_device *, u16);
+static u32 tlan_handle_tx_eoc(struct net_device *, u16);
+static u32 tlan_handle_status_check(struct net_device *, u16);
+static u32 tlan_handle_rx_eoc(struct net_device *, u16);
+
+static void tlan_timer(unsigned long);
+
+static void tlan_reset_lists(struct net_device *);
+static void tlan_free_lists(struct net_device *);
+static void tlan_print_dio(u16);
+static void tlan_print_list(struct tlan_list *, char *, int);
+static void tlan_read_and_clear_stats(struct net_device *, int);
+static void tlan_reset_adapter(struct net_device *);
+static void tlan_finish_reset(struct net_device *);
+static void tlan_set_mac(struct net_device *, int areg, char *mac);
+
+static void tlan_phy_print(struct net_device *);
+static void tlan_phy_detect(struct net_device *);
+static void tlan_phy_power_down(struct net_device *);
+static void tlan_phy_power_up(struct net_device *);
+static void tlan_phy_reset(struct net_device *);
+static void tlan_phy_start_link(struct net_device *);
+static void tlan_phy_finish_auto_neg(struct net_device *);
+static void tlan_phy_monitor(unsigned long);
+
+/*
+ static int tlan_phy_nop(struct net_device *);
+ static int tlan_phy_internal_check(struct net_device *);
+ static int tlan_phy_internal_service(struct net_device *);
+ static int tlan_phy_dp83840a_check(struct net_device *);
+*/
+
+static bool tlan_mii_read_reg(struct net_device *, u16, u16, u16 *);
+static void tlan_mii_send_data(u16, u32, unsigned);
+static void tlan_mii_sync(u16);
+static void tlan_mii_write_reg(struct net_device *, u16, u16, u16);
+
+static void tlan_ee_send_start(u16);
+static int tlan_ee_send_byte(u16, u8, int);
+static void tlan_ee_receive_byte(u16, u8 *, int);
+static int tlan_ee_read_byte(struct net_device *, u8, u8 *);
+
+
+static inline void
+tlan_store_skb(struct tlan_list *tag, struct sk_buff *skb)
+{
+ unsigned long addr = (unsigned long)skb;
+ tag->buffer[9].address = addr;
+ tag->buffer[8].address = upper_32_bits(addr);
+}
+
+static inline struct sk_buff *
+tlan_get_skb(const struct tlan_list *tag)
+{
+ unsigned long addr;
+
+ addr = tag->buffer[9].address;
+ addr |= ((unsigned long) tag->buffer[8].address << 16) << 16;
+ return (struct sk_buff *) addr;
+}
+
+static u32
+(*tlan_int_vector[TLAN_INT_NUMBER_OF_INTS])(struct net_device *, u16) = {
+ NULL,
+ tlan_handle_tx_eof,
+ tlan_handle_stat_overflow,
+ tlan_handle_rx_eof,
+ tlan_handle_dummy,
+ tlan_handle_tx_eoc,
+ tlan_handle_status_check,
+ tlan_handle_rx_eoc
+};
+
+static inline void
+tlan_set_timer(struct net_device *dev, u32 ticks, u32 type)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ unsigned long flags = 0;
+
+ if (!in_irq())
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->timer.function != NULL &&
+ priv->timer_type != TLAN_TIMER_ACTIVITY) {
+ if (!in_irq())
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return;
+ }
+ priv->timer.function = tlan_timer;
+ if (!in_irq())
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ priv->timer.data = (unsigned long) dev;
+ priv->timer_set_at = jiffies;
+ priv->timer_type = type;
+ mod_timer(&priv->timer, jiffies + ticks);
+
+}
+
+
+/*****************************************************************************
+******************************************************************************
+
+ThunderLAN driver primary functions
+
+these functions are more or less common to all linux network drivers.
+
+******************************************************************************
+*****************************************************************************/
+
+
+
+
+
+/***************************************************************
+ * tlan_remove_one
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * None
+ *
+ * Goes through the TLanDevices list and frees the device
+ * structs and memory associated with each device (lists
+ * and buffers). It also ureserves the IO port regions
+ * associated with this device.
+ *
+ **************************************************************/
+
+
+static void tlan_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct tlan_priv *priv = netdev_priv(dev);
+
+ unregister_netdev(dev);
+
+ if (priv->dma_storage) {
+ pci_free_consistent(priv->pci_dev,
+ priv->dma_size, priv->dma_storage,
+ priv->dma_storage_dma);
+ }
+
+#ifdef CONFIG_PCI
+ pci_release_regions(pdev);
+#endif
+
+ free_netdev(dev);
+
+ cancel_work_sync(&priv->tlan_tqueue);
+}
+
+static void tlan_start(struct net_device *dev)
+{
+ tlan_reset_lists(dev);
+ /* NOTE: It might not be necessary to read the stats before a
+ reset if you don't care what the values are.
+ */
+ tlan_read_and_clear_stats(dev, TLAN_IGNORE);
+ tlan_reset_adapter(dev);
+ netif_wake_queue(dev);
+}
+
+static void tlan_stop(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+
+ del_timer_sync(&priv->media_timer);
+ tlan_read_and_clear_stats(dev, TLAN_RECORD);
+ outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD);
+ /* Reset and power down phy */
+ tlan_reset_adapter(dev);
+ if (priv->timer.function != NULL) {
+ del_timer_sync(&priv->timer);
+ priv->timer.function = NULL;
+ }
+}
+
+#ifdef CONFIG_PM
+
+static int tlan_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (netif_running(dev))
+ tlan_stop(dev);
+
+ netif_device_detach(dev);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+static int tlan_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ int rc = pci_enable_device(pdev);
+
+ if (rc)
+ return rc;
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ netif_device_attach(dev);
+
+ if (netif_running(dev))
+ tlan_start(dev);
+
+ return 0;
+}
+
+#else /* CONFIG_PM */
+
+#define tlan_suspend NULL
+#define tlan_resume NULL
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver tlan_driver = {
+ .name = "tlan",
+ .id_table = tlan_pci_tbl,
+ .probe = tlan_init_one,
+ .remove = tlan_remove_one,
+ .suspend = tlan_suspend,
+ .resume = tlan_resume,
+};
+
+static int __init tlan_probe(void)
+{
+ int rc = -ENODEV;
+
+ pr_info("%s", tlan_banner);
+
+ TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
+
+ /* Use new style PCI probing. Now the kernel will
+ do most of this for us */
+ rc = pci_register_driver(&tlan_driver);
+
+ if (rc != 0) {
+ pr_err("Could not register pci driver\n");
+ goto err_out_pci_free;
+ }
+
+ TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
+ tlan_eisa_probe();
+
+ pr_info("%d device%s installed, PCI: %d EISA: %d\n",
+ tlan_devices_installed, tlan_devices_installed == 1 ? "" : "s",
+ tlan_have_pci, tlan_have_eisa);
+
+ if (tlan_devices_installed == 0) {
+ rc = -ENODEV;
+ goto err_out_pci_unreg;
+ }
+ return 0;
+
+err_out_pci_unreg:
+ pci_unregister_driver(&tlan_driver);
+err_out_pci_free:
+ return rc;
+}
+
+
+static int tlan_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ return tlan_probe1(pdev, -1, -1, 0, ent);
+}
+
+
+/*
+***************************************************************
+* tlan_probe1
+*
+* Returns:
+* 0 on success, error code on error
+* Parms:
+* none
+*
+* The name is lower case to fit in with all the rest of
+* the netcard_probe names. This function looks for
+* another TLan based adapter, setting it up with the
+* allocated device struct if one is found.
+* tlan_probe has been ported to the new net API and
+* now allocates its own device structure. This function
+* is also used by modules.
+*
+**************************************************************/
+
+static int tlan_probe1(struct pci_dev *pdev, long ioaddr, int irq, int rev,
+ const struct pci_device_id *ent)
+{
+
+ struct net_device *dev;
+ struct tlan_priv *priv;
+ u16 device_id;
+ int reg, rc = -ENODEV;
+
+#ifdef CONFIG_PCI
+ if (pdev) {
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, tlan_signature);
+ if (rc) {
+ pr_err("Could not reserve IO regions\n");
+ goto err_out;
+ }
+ }
+#endif /* CONFIG_PCI */
+
+ dev = alloc_etherdev(sizeof(struct tlan_priv));
+ if (dev == NULL) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ priv = netdev_priv(dev);
+
+ priv->pci_dev = pdev;
+ priv->dev = dev;
+
+ /* Is this a PCI device? */
+ if (pdev) {
+ u32 pci_io_base = 0;
+
+ priv->adapter = &board_info[ent->driver_data];
+
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ pr_err("No suitable PCI mapping available\n");
+ goto err_out_free_dev;
+ }
+
+ for (reg = 0; reg <= 5; reg++) {
+ if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
+ pci_io_base = pci_resource_start(pdev, reg);
+ TLAN_DBG(TLAN_DEBUG_GNRL,
+ "IO mapping is available at %x.\n",
+ pci_io_base);
+ break;
+ }
+ }
+ if (!pci_io_base) {
+ pr_err("No IO mappings available\n");
+ rc = -EIO;
+ goto err_out_free_dev;
+ }
+
+ dev->base_addr = pci_io_base;
+ dev->irq = pdev->irq;
+ priv->adapter_rev = pdev->revision;
+ pci_set_master(pdev);
+ pci_set_drvdata(pdev, dev);
+
+ } else { /* EISA card */
+ /* This is a hack. We need to know which board structure
+ * is suited for this adapter */
+ device_id = inw(ioaddr + EISA_ID2);
+ if (device_id == 0x20F1) {
+ priv->adapter = &board_info[13]; /* NetFlex-3/E */
+ priv->adapter_rev = 23; /* TLAN 2.3 */
+ } else {
+ priv->adapter = &board_info[14];
+ priv->adapter_rev = 10; /* TLAN 1.0 */
+ }
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ }
+
+ /* Kernel parameters */
+ if (dev->mem_start) {
+ priv->aui = dev->mem_start & 0x01;
+ priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0
+ : (dev->mem_start & 0x06) >> 1;
+ priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0
+ : (dev->mem_start & 0x18) >> 3;
+
+ if (priv->speed == 0x1)
+ priv->speed = TLAN_SPEED_10;
+ else if (priv->speed == 0x2)
+ priv->speed = TLAN_SPEED_100;
+
+ debug = priv->debug = dev->mem_end;
+ } else {
+ priv->aui = aui[boards_found];
+ priv->speed = speed[boards_found];
+ priv->duplex = duplex[boards_found];
+ priv->debug = debug;
+ }
+
+ /* This will be used when we get an adapter error from
+ * within our irq handler */
+ INIT_WORK(&priv->tlan_tqueue, tlan_tx_timeout_work);
+
+ spin_lock_init(&priv->lock);
+
+ rc = tlan_init(dev);
+ if (rc) {
+ pr_err("Could not set up device\n");
+ goto err_out_free_dev;
+ }
+
+ rc = register_netdev(dev);
+ if (rc) {
+ pr_err("Could not register device\n");
+ goto err_out_uninit;
+ }
+
+
+ tlan_devices_installed++;
+ boards_found++;
+
+ /* pdev is NULL if this is an EISA device */
+ if (pdev)
+ tlan_have_pci++;
+ else {
+ priv->next_device = tlan_eisa_devices;
+ tlan_eisa_devices = dev;
+ tlan_have_eisa++;
+ }
+
+ netdev_info(dev, "irq=%2d, io=%04x, %s, Rev. %d\n",
+ (int)dev->irq,
+ (int)dev->base_addr,
+ priv->adapter->device_label,
+ priv->adapter_rev);
+ return 0;
+
+err_out_uninit:
+ pci_free_consistent(priv->pci_dev, priv->dma_size, priv->dma_storage,
+ priv->dma_storage_dma);
+err_out_free_dev:
+ free_netdev(dev);
+err_out_regions:
+#ifdef CONFIG_PCI
+ if (pdev)
+ pci_release_regions(pdev);
+#endif
+err_out:
+ if (pdev)
+ pci_disable_device(pdev);
+ return rc;
+}
+
+
+static void tlan_eisa_cleanup(void)
+{
+ struct net_device *dev;
+ struct tlan_priv *priv;
+
+ while (tlan_have_eisa) {
+ dev = tlan_eisa_devices;
+ priv = netdev_priv(dev);
+ if (priv->dma_storage) {
+ pci_free_consistent(priv->pci_dev, priv->dma_size,
+ priv->dma_storage,
+ priv->dma_storage_dma);
+ }
+ release_region(dev->base_addr, 0x10);
+ unregister_netdev(dev);
+ tlan_eisa_devices = priv->next_device;
+ free_netdev(dev);
+ tlan_have_eisa--;
+ }
+}
+
+
+static void __exit tlan_exit(void)
+{
+ pci_unregister_driver(&tlan_driver);
+
+ if (tlan_have_eisa)
+ tlan_eisa_cleanup();
+
+}
+
+
+/* Module loading/unloading */
+module_init(tlan_probe);
+module_exit(tlan_exit);
+
+
+
+/**************************************************************
+ * tlan_eisa_probe
+ *
+ * Returns: 0 on success, 1 otherwise
+ *
+ * Parms: None
+ *
+ *
+ * This functions probes for EISA devices and calls
+ * TLan_probe1 when one is found.
+ *
+ *************************************************************/
+
+static void __init tlan_eisa_probe(void)
+{
+ long ioaddr;
+ int rc = -ENODEV;
+ int irq;
+ u16 device_id;
+
+ if (!EISA_bus) {
+ TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n");
+ return;
+ }
+
+ /* Loop through all slots of the EISA bus */
+ for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
+
+ TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n",
+ (int) ioaddr + 0xc80, inw(ioaddr + EISA_ID));
+ TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n",
+ (int) ioaddr + 0xc82, inw(ioaddr + EISA_ID2));
+
+
+ TLAN_DBG(TLAN_DEBUG_PROBE,
+ "Probing for EISA adapter at IO: 0x%4x : ",
+ (int) ioaddr);
+ if (request_region(ioaddr, 0x10, tlan_signature) == NULL)
+ goto out;
+
+ if (inw(ioaddr + EISA_ID) != 0x110E) {
+ release_region(ioaddr, 0x10);
+ goto out;
+ }
+
+ device_id = inw(ioaddr + EISA_ID2);
+ if (device_id != 0x20F1 && device_id != 0x40F1) {
+ release_region(ioaddr, 0x10);
+ goto out;
+ }
+
+ /* check if adapter is enabled */
+ if (inb(ioaddr + EISA_CR) != 0x1) {
+ release_region(ioaddr, 0x10);
+ goto out2;
+ }
+
+ if (debug == 0x10)
+ pr_info("Found one\n");
+
+
+ /* Get irq from board */
+ switch (inb(ioaddr + 0xcc0)) {
+ case(0x10):
+ irq = 5;
+ break;
+ case(0x20):
+ irq = 9;
+ break;
+ case(0x40):
+ irq = 10;
+ break;
+ case(0x80):
+ irq = 11;
+ break;
+ default:
+ goto out;
+ }
+
+
+ /* Setup the newly found eisa adapter */
+ rc = tlan_probe1(NULL, ioaddr, irq,
+ 12, NULL);
+ continue;
+
+out:
+ if (debug == 0x10)
+ pr_info("None found\n");
+ continue;
+
+out2:
+ if (debug == 0x10)
+ pr_info("Card found but it is not enabled, skipping\n");
+ continue;
+
+ }
+
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void tlan_poll(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ tlan_handle_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static const struct net_device_ops tlan_netdev_ops = {
+ .ndo_open = tlan_open,
+ .ndo_stop = tlan_close,
+ .ndo_start_xmit = tlan_start_tx,
+ .ndo_tx_timeout = tlan_tx_timeout,
+ .ndo_get_stats = tlan_get_stats,
+ .ndo_set_rx_mode = tlan_set_multicast_list,
+ .ndo_do_ioctl = tlan_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = tlan_poll,
+#endif
+};
+
+static void tlan_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+
+ strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
+ if (priv->pci_dev)
+ strlcpy(info->bus_info, pci_name(priv->pci_dev),
+ sizeof(info->bus_info));
+ else
+ strlcpy(info->bus_info, "EISA", sizeof(info->bus_info));
+ info->eedump_len = TLAN_EEPROM_SIZE;
+}
+
+static int tlan_get_eeprom_len(struct net_device *dev)
+{
+ return TLAN_EEPROM_SIZE;
+}
+
+static int tlan_get_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ int i;
+
+ for (i = 0; i < TLAN_EEPROM_SIZE; i++)
+ if (tlan_ee_read_byte(dev, i, &data[i]))
+ return -EIO;
+
+ return 0;
+}
+
+static const struct ethtool_ops tlan_ethtool_ops = {
+ .get_drvinfo = tlan_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = tlan_get_eeprom_len,
+ .get_eeprom = tlan_get_eeprom,
+};
+
+/***************************************************************
+ * tlan_init
+ *
+ * Returns:
+ * 0 on success, error code otherwise.
+ * Parms:
+ * dev The structure of the device to be
+ * init'ed.
+ *
+ * This function completes the initialization of the
+ * device structure and driver. It reserves the IO
+ * addresses, allocates memory for the lists and bounce
+ * buffers, retrieves the MAC address from the eeprom
+ * and assignes the device's methods.
+ *
+ **************************************************************/
+
+static int tlan_init(struct net_device *dev)
+{
+ int dma_size;
+ int err;
+ int i;
+ struct tlan_priv *priv;
+
+ priv = netdev_priv(dev);
+
+ dma_size = (TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS)
+ * (sizeof(struct tlan_list));
+ priv->dma_storage = pci_alloc_consistent(priv->pci_dev,
+ dma_size,
+ &priv->dma_storage_dma);
+ priv->dma_size = dma_size;
+
+ if (priv->dma_storage == NULL) {
+ pr_err("Could not allocate lists and buffers for %s\n",
+ dev->name);
+ return -ENOMEM;
+ }
+ memset(priv->dma_storage, 0, dma_size);
+ priv->rx_list = (struct tlan_list *)
+ ALIGN((unsigned long)priv->dma_storage, 8);
+ priv->rx_list_dma = ALIGN(priv->dma_storage_dma, 8);
+ priv->tx_list = priv->rx_list + TLAN_NUM_RX_LISTS;
+ priv->tx_list_dma =
+ priv->rx_list_dma + sizeof(struct tlan_list)*TLAN_NUM_RX_LISTS;
+
+ err = 0;
+ for (i = 0; i < ETH_ALEN; i++)
+ err |= tlan_ee_read_byte(dev,
+ (u8) priv->adapter->addr_ofs + i,
+ (u8 *) &dev->dev_addr[i]);
+ if (err) {
+ pr_err("%s: Error reading MAC from eeprom: %d\n",
+ dev->name, err);
+ }
+ /* Olicom OC-2325/OC-2326 have the address byte-swapped */
+ if (priv->adapter->addr_ofs == 0xf8) {
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ char tmp = dev->dev_addr[i];
+ dev->dev_addr[i] = dev->dev_addr[i + 1];
+ dev->dev_addr[i + 1] = tmp;
+ }
+ }
+
+ netif_carrier_off(dev);
+
+ /* Device methods */
+ dev->netdev_ops = &tlan_netdev_ops;
+ dev->ethtool_ops = &tlan_ethtool_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ return 0;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_open
+ *
+ * Returns:
+ * 0 on success, error code otherwise.
+ * Parms:
+ * dev Structure of device to be opened.
+ *
+ * This routine puts the driver and TLAN adapter in a
+ * state where it is ready to send and receive packets.
+ * It allocates the IRQ, resets and brings the adapter
+ * out of reset, and allows interrupts. It also delays
+ * the startup for autonegotiation or sends a Rx GO
+ * command to the adapter, as appropriate.
+ *
+ **************************************************************/
+
+static int tlan_open(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ int err;
+
+ priv->tlan_rev = tlan_dio_read8(dev->base_addr, TLAN_DEF_REVISION);
+ err = request_irq(dev->irq, tlan_handle_interrupt, IRQF_SHARED,
+ dev->name, dev);
+
+ if (err) {
+ netdev_err(dev, "Cannot open because IRQ %d is already in use\n",
+ dev->irq);
+ return err;
+ }
+
+ init_timer(&priv->timer);
+ init_timer(&priv->media_timer);
+
+ tlan_start(dev);
+
+ TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n",
+ dev->name, priv->tlan_rev);
+
+ return 0;
+
+}
+
+
+
+/**************************************************************
+ * tlan_ioctl
+ *
+ * Returns:
+ * 0 on success, error code otherwise
+ * Params:
+ * dev structure of device to receive ioctl.
+ *
+ * rq ifreq structure to hold userspace data.
+ *
+ * cmd ioctl command.
+ *
+ *
+ *************************************************************/
+
+static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ struct mii_ioctl_data *data = if_mii(rq);
+ u32 phy = priv->phy[priv->phy_num];
+
+ if (!priv->phy_online)
+ return -EAGAIN;
+
+ switch (cmd) {
+ case SIOCGMIIPHY: /* get address of MII PHY in use. */
+ data->phy_id = phy;
+
+
+ case SIOCGMIIREG: /* read MII PHY register. */
+ tlan_mii_read_reg(dev, data->phy_id & 0x1f,
+ data->reg_num & 0x1f, &data->val_out);
+ return 0;
+
+
+ case SIOCSMIIREG: /* write MII PHY register. */
+ tlan_mii_write_reg(dev, data->phy_id & 0x1f,
+ data->reg_num & 0x1f, data->val_in);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+
+/***************************************************************
+ * tlan_tx_timeout
+ *
+ * Returns: nothing
+ *
+ * Params:
+ * dev structure of device which timed out
+ * during transmit.
+ *
+ **************************************************************/
+
+static void tlan_tx_timeout(struct net_device *dev)
+{
+
+ TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name);
+
+ /* Ok so we timed out, lets see what we can do about it...*/
+ tlan_free_lists(dev);
+ tlan_reset_lists(dev);
+ tlan_read_and_clear_stats(dev, TLAN_IGNORE);
+ tlan_reset_adapter(dev);
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ netif_wake_queue(dev);
+
+}
+
+
+/***************************************************************
+ * tlan_tx_timeout_work
+ *
+ * Returns: nothing
+ *
+ * Params:
+ * work work item of device which timed out
+ *
+ **************************************************************/
+
+static void tlan_tx_timeout_work(struct work_struct *work)
+{
+ struct tlan_priv *priv =
+ container_of(work, struct tlan_priv, tlan_tqueue);
+
+ tlan_tx_timeout(priv->dev);
+}
+
+
+
+/***************************************************************
+ * tlan_start_tx
+ *
+ * Returns:
+ * 0 on success, non-zero on failure.
+ * Parms:
+ * skb A pointer to the sk_buff containing the
+ * frame to be sent.
+ * dev The device to send the data on.
+ *
+ * This function adds a frame to the Tx list to be sent
+ * ASAP. First it verifies that the adapter is ready and
+ * there is room in the queue. Then it sets up the next
+ * available list, copies the frame to the corresponding
+ * buffer. If the adapter Tx channel is idle, it gives
+ * the adapter a Tx Go command on the list, otherwise it
+ * sets the forward address of the previous list to point
+ * to this one. Then it frees the sk_buff.
+ *
+ **************************************************************/
+
+static netdev_tx_t tlan_start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ dma_addr_t tail_list_phys;
+ struct tlan_list *tail_list;
+ unsigned long flags;
+ unsigned int txlen;
+
+ if (!priv->phy_online) {
+ TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n",
+ dev->name);
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
+ return NETDEV_TX_OK;
+ txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
+
+ tail_list = priv->tx_list + priv->tx_tail;
+ tail_list_phys =
+ priv->tx_list_dma + sizeof(struct tlan_list)*priv->tx_tail;
+
+ if (tail_list->c_stat != TLAN_CSTAT_UNUSED) {
+ TLAN_DBG(TLAN_DEBUG_TX,
+ "TRANSMIT: %s is busy (Head=%d Tail=%d)\n",
+ dev->name, priv->tx_head, priv->tx_tail);
+ netif_stop_queue(dev);
+ priv->tx_busy_count++;
+ return NETDEV_TX_BUSY;
+ }
+
+ tail_list->forward = 0;
+
+ tail_list->buffer[0].address = pci_map_single(priv->pci_dev,
+ skb->data, txlen,
+ PCI_DMA_TODEVICE);
+ tlan_store_skb(tail_list, skb);
+
+ tail_list->frame_size = (u16) txlen;
+ tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
+ tail_list->buffer[1].count = 0;
+ tail_list->buffer[1].address = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ tail_list->c_stat = TLAN_CSTAT_READY;
+ if (!priv->tx_in_progress) {
+ priv->tx_in_progress = 1;
+ TLAN_DBG(TLAN_DEBUG_TX,
+ "TRANSMIT: Starting TX on buffer %d\n",
+ priv->tx_tail);
+ outl(tail_list_phys, dev->base_addr + TLAN_CH_PARM);
+ outl(TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD);
+ } else {
+ TLAN_DBG(TLAN_DEBUG_TX,
+ "TRANSMIT: Adding buffer %d to TX channel\n",
+ priv->tx_tail);
+ if (priv->tx_tail == 0) {
+ (priv->tx_list + (TLAN_NUM_TX_LISTS - 1))->forward
+ = tail_list_phys;
+ } else {
+ (priv->tx_list + (priv->tx_tail - 1))->forward
+ = tail_list_phys;
+ }
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ CIRC_INC(priv->tx_tail, TLAN_NUM_TX_LISTS);
+
+ return NETDEV_TX_OK;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_handle_interrupt
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * irq The line on which the interrupt
+ * occurred.
+ * dev_id A pointer to the device assigned to
+ * this irq line.
+ *
+ * This function handles an interrupt generated by its
+ * assigned TLAN adapter. The function deactivates
+ * interrupts on its adapter, records the type of
+ * interrupt, executes the appropriate subhandler, and
+ * acknowdges the interrupt to the adapter (thus
+ * re-enabling adapter interrupts.
+ *
+ **************************************************************/
+
+static irqreturn_t tlan_handle_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct tlan_priv *priv = netdev_priv(dev);
+ u16 host_int;
+ u16 type;
+
+ spin_lock(&priv->lock);
+
+ host_int = inw(dev->base_addr + TLAN_HOST_INT);
+ type = (host_int & TLAN_HI_IT_MASK) >> 2;
+ if (type) {
+ u32 ack;
+ u32 host_cmd;
+
+ outw(host_int, dev->base_addr + TLAN_HOST_INT);
+ ack = tlan_int_vector[type](dev, host_int);
+
+ if (ack) {
+ host_cmd = TLAN_HC_ACK | ack | (type << 18);
+ outl(host_cmd, dev->base_addr + TLAN_HOST_CMD);
+ }
+ }
+
+ spin_unlock(&priv->lock);
+
+ return IRQ_RETVAL(type);
+}
+
+
+
+
+/***************************************************************
+ * tlan_close
+ *
+ * Returns:
+ * An error code.
+ * Parms:
+ * dev The device structure of the device to
+ * close.
+ *
+ * This function shuts down the adapter. It records any
+ * stats, puts the adapter into reset state, deactivates
+ * its time as needed, and frees the irq it is using.
+ *
+ **************************************************************/
+
+static int tlan_close(struct net_device *dev)
+{
+ tlan_stop(dev);
+
+ free_irq(dev->irq, dev);
+ tlan_free_lists(dev);
+ TLAN_DBG(TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name);
+
+ return 0;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_get_stats
+ *
+ * Returns:
+ * A pointer to the device's statistics structure.
+ * Parms:
+ * dev The device structure to return the
+ * stats for.
+ *
+ * This function updates the devices statistics by reading
+ * the TLAN chip's onboard registers. Then it returns the
+ * address of the statistics structure.
+ *
+ **************************************************************/
+
+static struct net_device_stats *tlan_get_stats(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ int i;
+
+ /* Should only read stats if open ? */
+ tlan_read_and_clear_stats(dev, TLAN_RECORD);
+
+ TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name,
+ priv->rx_eoc_count);
+ TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name,
+ priv->tx_busy_count);
+ if (debug & TLAN_DEBUG_GNRL) {
+ tlan_print_dio(dev->base_addr);
+ tlan_phy_print(dev);
+ }
+ if (debug & TLAN_DEBUG_LIST) {
+ for (i = 0; i < TLAN_NUM_RX_LISTS; i++)
+ tlan_print_list(priv->rx_list + i, "RX", i);
+ for (i = 0; i < TLAN_NUM_TX_LISTS; i++)
+ tlan_print_list(priv->tx_list + i, "TX", i);
+ }
+
+ return &dev->stats;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_set_multicast_list
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev The device structure to set the
+ * multicast list for.
+ *
+ * This function sets the TLAN adaptor to various receive
+ * modes. If the IFF_PROMISC flag is set, promiscuous
+ * mode is acitviated. Otherwise, promiscuous mode is
+ * turned off. If the IFF_ALLMULTI flag is set, then
+ * the hash table is set to receive all group addresses.
+ * Otherwise, the first three multicast addresses are
+ * stored in AREG_1-3, and the rest are selected via the
+ * hash table, as necessary.
+ *
+ **************************************************************/
+
+static void tlan_set_multicast_list(struct net_device *dev)
+{
+ struct netdev_hw_addr *ha;
+ u32 hash1 = 0;
+ u32 hash2 = 0;
+ int i;
+ u32 offset;
+ u8 tmp;
+
+ if (dev->flags & IFF_PROMISC) {
+ tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD);
+ tlan_dio_write8(dev->base_addr,
+ TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF);
+ } else {
+ tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD);
+ tlan_dio_write8(dev->base_addr,
+ TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF);
+ if (dev->flags & IFF_ALLMULTI) {
+ for (i = 0; i < 3; i++)
+ tlan_set_mac(dev, i + 1, NULL);
+ tlan_dio_write32(dev->base_addr, TLAN_HASH_1,
+ 0xffffffff);
+ tlan_dio_write32(dev->base_addr, TLAN_HASH_2,
+ 0xffffffff);
+ } else {
+ i = 0;
+ netdev_for_each_mc_addr(ha, dev) {
+ if (i < 3) {
+ tlan_set_mac(dev, i + 1,
+ (char *) &ha->addr);
+ } else {
+ offset =
+ tlan_hash_func((u8 *)&ha->addr);
+ if (offset < 32)
+ hash1 |= (1 << offset);
+ else
+ hash2 |= (1 << (offset - 32));
+ }
+ i++;
+ }
+ for ( ; i < 3; i++)
+ tlan_set_mac(dev, i + 1, NULL);
+ tlan_dio_write32(dev->base_addr, TLAN_HASH_1, hash1);
+ tlan_dio_write32(dev->base_addr, TLAN_HASH_2, hash2);
+ }
+ }
+
+}
+
+
+
+/*****************************************************************************
+******************************************************************************
+
+ThunderLAN driver interrupt vectors and table
+
+please see chap. 4, "Interrupt Handling" of the "ThunderLAN
+Programmer's Guide" for more informations on handling interrupts
+generated by TLAN based adapters.
+
+******************************************************************************
+*****************************************************************************/
+
+
+
+
+/***************************************************************
+ * tlan_handle_tx_eof
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles Tx EOF interrupts which are raised
+ * by the adapter when it has completed sending the
+ * contents of a buffer. If detemines which list/buffer
+ * was completed and resets it. If the buffer was the last
+ * in the channel (EOC), then the function checks to see if
+ * another buffer is ready to send, and if so, sends a Tx
+ * Go command. Finally, the driver activates/continues the
+ * activity LED.
+ *
+ **************************************************************/
+
+static u32 tlan_handle_tx_eof(struct net_device *dev, u16 host_int)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ int eoc = 0;
+ struct tlan_list *head_list;
+ dma_addr_t head_list_phys;
+ u32 ack = 0;
+ u16 tmp_c_stat;
+
+ TLAN_DBG(TLAN_DEBUG_TX,
+ "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n",
+ priv->tx_head, priv->tx_tail);
+ head_list = priv->tx_list + priv->tx_head;
+
+ while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP)
+ && (ack < 255)) {
+ struct sk_buff *skb = tlan_get_skb(head_list);
+
+ ack++;
+ pci_unmap_single(priv->pci_dev, head_list->buffer[0].address,
+ max(skb->len,
+ (unsigned int)TLAN_MIN_FRAME_SIZE),
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(skb);
+ head_list->buffer[8].address = 0;
+ head_list->buffer[9].address = 0;
+
+ if (tmp_c_stat & TLAN_CSTAT_EOC)
+ eoc = 1;
+
+ dev->stats.tx_bytes += head_list->frame_size;
+
+ head_list->c_stat = TLAN_CSTAT_UNUSED;
+ netif_start_queue(dev);
+ CIRC_INC(priv->tx_head, TLAN_NUM_TX_LISTS);
+ head_list = priv->tx_list + priv->tx_head;
+ }
+
+ if (!ack)
+ netdev_info(dev,
+ "Received interrupt for uncompleted TX frame\n");
+
+ if (eoc) {
+ TLAN_DBG(TLAN_DEBUG_TX,
+ "TRANSMIT: handling TX EOC (Head=%d Tail=%d)\n",
+ priv->tx_head, priv->tx_tail);
+ head_list = priv->tx_list + priv->tx_head;
+ head_list_phys = priv->tx_list_dma
+ + sizeof(struct tlan_list)*priv->tx_head;
+ if ((head_list->c_stat & TLAN_CSTAT_READY)
+ == TLAN_CSTAT_READY) {
+ outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
+ ack |= TLAN_HC_GO;
+ } else {
+ priv->tx_in_progress = 0;
+ }
+ }
+
+ if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) {
+ tlan_dio_write8(dev->base_addr,
+ TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT);
+ if (priv->timer.function == NULL) {
+ priv->timer.function = tlan_timer;
+ priv->timer.data = (unsigned long) dev;
+ priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
+ priv->timer_set_at = jiffies;
+ priv->timer_type = TLAN_TIMER_ACTIVITY;
+ add_timer(&priv->timer);
+ } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) {
+ priv->timer_set_at = jiffies;
+ }
+ }
+
+ return ack;
+
+}
+
+
+
+
+/***************************************************************
+ * TLan_HandleStatOverflow
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles the Statistics Overflow interrupt
+ * which means that one or more of the TLAN statistics
+ * registers has reached 1/2 capacity and needs to be read.
+ *
+ **************************************************************/
+
+static u32 tlan_handle_stat_overflow(struct net_device *dev, u16 host_int)
+{
+ tlan_read_and_clear_stats(dev, TLAN_RECORD);
+
+ return 1;
+
+}
+
+
+
+
+/***************************************************************
+ * TLan_HandleRxEOF
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles the Rx EOF interrupt which
+ * indicates a frame has been received by the adapter from
+ * the net and the frame has been transferred to memory.
+ * The function determines the bounce buffer the frame has
+ * been loaded into, creates a new sk_buff big enough to
+ * hold the frame, and sends it to protocol stack. It
+ * then resets the used buffer and appends it to the end
+ * of the list. If the frame was the last in the Rx
+ * channel (EOC), the function restarts the receive channel
+ * by sending an Rx Go command to the adapter. Then it
+ * activates/continues the activity LED.
+ *
+ **************************************************************/
+
+static u32 tlan_handle_rx_eof(struct net_device *dev, u16 host_int)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u32 ack = 0;
+ int eoc = 0;
+ struct tlan_list *head_list;
+ struct sk_buff *skb;
+ struct tlan_list *tail_list;
+ u16 tmp_c_stat;
+ dma_addr_t head_list_phys;
+
+ TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: handling RX EOF (Head=%d Tail=%d)\n",
+ priv->rx_head, priv->rx_tail);
+ head_list = priv->rx_list + priv->rx_head;
+ head_list_phys =
+ priv->rx_list_dma + sizeof(struct tlan_list)*priv->rx_head;
+
+ while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP)
+ && (ack < 255)) {
+ dma_addr_t frame_dma = head_list->buffer[0].address;
+ u32 frame_size = head_list->frame_size;
+ struct sk_buff *new_skb;
+
+ ack++;
+ if (tmp_c_stat & TLAN_CSTAT_EOC)
+ eoc = 1;
+
+ new_skb = netdev_alloc_skb_ip_align(dev,
+ TLAN_MAX_FRAME_SIZE + 5);
+ if (!new_skb)
+ goto drop_and_reuse;
+
+ skb = tlan_get_skb(head_list);
+ pci_unmap_single(priv->pci_dev, frame_dma,
+ TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
+ skb_put(skb, frame_size);
+
+ dev->stats.rx_bytes += frame_size;
+
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+
+ head_list->buffer[0].address =
+ pci_map_single(priv->pci_dev, new_skb->data,
+ TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
+
+ tlan_store_skb(head_list, new_skb);
+drop_and_reuse:
+ head_list->forward = 0;
+ head_list->c_stat = 0;
+ tail_list = priv->rx_list + priv->rx_tail;
+ tail_list->forward = head_list_phys;
+
+ CIRC_INC(priv->rx_head, TLAN_NUM_RX_LISTS);
+ CIRC_INC(priv->rx_tail, TLAN_NUM_RX_LISTS);
+ head_list = priv->rx_list + priv->rx_head;
+ head_list_phys = priv->rx_list_dma
+ + sizeof(struct tlan_list)*priv->rx_head;
+ }
+
+ if (!ack)
+ netdev_info(dev,
+ "Received interrupt for uncompleted RX frame\n");
+
+
+ if (eoc) {
+ TLAN_DBG(TLAN_DEBUG_RX,
+ "RECEIVE: handling RX EOC (Head=%d Tail=%d)\n",
+ priv->rx_head, priv->rx_tail);
+ head_list = priv->rx_list + priv->rx_head;
+ head_list_phys = priv->rx_list_dma
+ + sizeof(struct tlan_list)*priv->rx_head;
+ outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
+ ack |= TLAN_HC_GO | TLAN_HC_RT;
+ priv->rx_eoc_count++;
+ }
+
+ if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) {
+ tlan_dio_write8(dev->base_addr,
+ TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT);
+ if (priv->timer.function == NULL) {
+ priv->timer.function = tlan_timer;
+ priv->timer.data = (unsigned long) dev;
+ priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
+ priv->timer_set_at = jiffies;
+ priv->timer_type = TLAN_TIMER_ACTIVITY;
+ add_timer(&priv->timer);
+ } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) {
+ priv->timer_set_at = jiffies;
+ }
+ }
+
+ return ack;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_handle_dummy
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles the Dummy interrupt, which is
+ * raised whenever a test interrupt is generated by setting
+ * the Req_Int bit of HOST_CMD to 1.
+ *
+ **************************************************************/
+
+static u32 tlan_handle_dummy(struct net_device *dev, u16 host_int)
+{
+ netdev_info(dev, "Test interrupt\n");
+ return 1;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_handle_tx_eoc
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This driver is structured to determine EOC occurrences by
+ * reading the CSTAT member of the list structure. Tx EOC
+ * interrupts are disabled via the DIO INTDIS register.
+ * However, TLAN chips before revision 3.0 didn't have this
+ * functionality, so process EOC events if this is the
+ * case.
+ *
+ **************************************************************/
+
+static u32 tlan_handle_tx_eoc(struct net_device *dev, u16 host_int)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ struct tlan_list *head_list;
+ dma_addr_t head_list_phys;
+ u32 ack = 1;
+
+ host_int = 0;
+ if (priv->tlan_rev < 0x30) {
+ TLAN_DBG(TLAN_DEBUG_TX,
+ "TRANSMIT: handling TX EOC (Head=%d Tail=%d) -- IRQ\n",
+ priv->tx_head, priv->tx_tail);
+ head_list = priv->tx_list + priv->tx_head;
+ head_list_phys = priv->tx_list_dma
+ + sizeof(struct tlan_list)*priv->tx_head;
+ if ((head_list->c_stat & TLAN_CSTAT_READY)
+ == TLAN_CSTAT_READY) {
+ netif_stop_queue(dev);
+ outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
+ ack |= TLAN_HC_GO;
+ } else {
+ priv->tx_in_progress = 0;
+ }
+ }
+
+ return ack;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_handle_status_check
+ *
+ * Returns:
+ * 0 if Adapter check, 1 if Network Status check.
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles Adapter Check/Network Status
+ * interrupts generated by the adapter. It checks the
+ * vector in the HOST_INT register to determine if it is
+ * an Adapter Check interrupt. If so, it resets the
+ * adapter. Otherwise it clears the status registers
+ * and services the PHY.
+ *
+ **************************************************************/
+
+static u32 tlan_handle_status_check(struct net_device *dev, u16 host_int)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u32 ack;
+ u32 error;
+ u8 net_sts;
+ u32 phy;
+ u16 tlphy_ctl;
+ u16 tlphy_sts;
+
+ ack = 1;
+ if (host_int & TLAN_HI_IV_MASK) {
+ netif_stop_queue(dev);
+ error = inl(dev->base_addr + TLAN_CH_PARM);
+ netdev_info(dev, "Adaptor Error = 0x%x\n", error);
+ tlan_read_and_clear_stats(dev, TLAN_RECORD);
+ outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD);
+
+ schedule_work(&priv->tlan_tqueue);
+
+ netif_wake_queue(dev);
+ ack = 0;
+ } else {
+ TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name);
+ phy = priv->phy[priv->phy_num];
+
+ net_sts = tlan_dio_read8(dev->base_addr, TLAN_NET_STS);
+ if (net_sts) {
+ tlan_dio_write8(dev->base_addr, TLAN_NET_STS, net_sts);
+ TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n",
+ dev->name, (unsigned) net_sts);
+ }
+ if ((net_sts & TLAN_NET_STS_MIRQ) && (priv->phy_num == 0)) {
+ tlan_mii_read_reg(dev, phy, TLAN_TLPHY_STS, &tlphy_sts);
+ tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl);
+ if (!(tlphy_sts & TLAN_TS_POLOK) &&
+ !(tlphy_ctl & TLAN_TC_SWAPOL)) {
+ tlphy_ctl |= TLAN_TC_SWAPOL;
+ tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL,
+ tlphy_ctl);
+ } else if ((tlphy_sts & TLAN_TS_POLOK) &&
+ (tlphy_ctl & TLAN_TC_SWAPOL)) {
+ tlphy_ctl &= ~TLAN_TC_SWAPOL;
+ tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL,
+ tlphy_ctl);
+ }
+
+ if (debug)
+ tlan_phy_print(dev);
+ }
+ }
+
+ return ack;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_handle_rx_eoc
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This driver is structured to determine EOC occurrences by
+ * reading the CSTAT member of the list structure. Rx EOC
+ * interrupts are disabled via the DIO INTDIS register.
+ * However, TLAN chips before revision 3.0 didn't have this
+ * CSTAT member or a INTDIS register, so if this chip is
+ * pre-3.0, process EOC interrupts normally.
+ *
+ **************************************************************/
+
+static u32 tlan_handle_rx_eoc(struct net_device *dev, u16 host_int)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ dma_addr_t head_list_phys;
+ u32 ack = 1;
+
+ if (priv->tlan_rev < 0x30) {
+ TLAN_DBG(TLAN_DEBUG_RX,
+ "RECEIVE: Handling RX EOC (head=%d tail=%d) -- IRQ\n",
+ priv->rx_head, priv->rx_tail);
+ head_list_phys = priv->rx_list_dma
+ + sizeof(struct tlan_list)*priv->rx_head;
+ outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
+ ack |= TLAN_HC_GO | TLAN_HC_RT;
+ priv->rx_eoc_count++;
+ }
+
+ return ack;
+
+}
+
+
+
+
+/*****************************************************************************
+******************************************************************************
+
+ThunderLAN driver timer function
+
+******************************************************************************
+*****************************************************************************/
+
+
+/***************************************************************
+ * tlan_timer
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * data A value given to add timer when
+ * add_timer was called.
+ *
+ * This function handles timed functionality for the
+ * TLAN driver. The two current timer uses are for
+ * delaying for autonegotionation and driving the ACT LED.
+ * - Autonegotiation requires being allowed about
+ * 2 1/2 seconds before attempting to transmit a
+ * packet. It would be a very bad thing to hang
+ * the kernel this long, so the driver doesn't
+ * allow transmission 'til after this time, for
+ * certain PHYs. It would be much nicer if all
+ * PHYs were interrupt-capable like the internal
+ * PHY.
+ * - The ACT LED, which shows adapter activity, is
+ * driven by the driver, and so must be left on
+ * for a short period to power up the LED so it
+ * can be seen. This delay can be changed by
+ * changing the TLAN_TIMER_ACT_DELAY in tlan.h,
+ * if desired. 100 ms produces a slightly
+ * sluggish response.
+ *
+ **************************************************************/
+
+static void tlan_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct tlan_priv *priv = netdev_priv(dev);
+ u32 elapsed;
+ unsigned long flags = 0;
+
+ priv->timer.function = NULL;
+
+ switch (priv->timer_type) {
+ case TLAN_TIMER_PHY_PDOWN:
+ tlan_phy_power_down(dev);
+ break;
+ case TLAN_TIMER_PHY_PUP:
+ tlan_phy_power_up(dev);
+ break;
+ case TLAN_TIMER_PHY_RESET:
+ tlan_phy_reset(dev);
+ break;
+ case TLAN_TIMER_PHY_START_LINK:
+ tlan_phy_start_link(dev);
+ break;
+ case TLAN_TIMER_PHY_FINISH_AN:
+ tlan_phy_finish_auto_neg(dev);
+ break;
+ case TLAN_TIMER_FINISH_RESET:
+ tlan_finish_reset(dev);
+ break;
+ case TLAN_TIMER_ACTIVITY:
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->timer.function == NULL) {
+ elapsed = jiffies - priv->timer_set_at;
+ if (elapsed >= TLAN_TIMER_ACT_DELAY) {
+ tlan_dio_write8(dev->base_addr,
+ TLAN_LED_REG, TLAN_LED_LINK);
+ } else {
+ priv->timer.function = tlan_timer;
+ priv->timer.expires = priv->timer_set_at
+ + TLAN_TIMER_ACT_DELAY;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ add_timer(&priv->timer);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ default:
+ break;
+ }
+
+}
+
+
+/*****************************************************************************
+******************************************************************************
+
+ThunderLAN driver adapter related routines
+
+******************************************************************************
+*****************************************************************************/
+
+
+/***************************************************************
+ * tlan_reset_lists
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev The device structure with the list
+ * stuctures to be reset.
+ *
+ * This routine sets the variables associated with managing
+ * the TLAN lists to their initial values.
+ *
+ **************************************************************/
+
+static void tlan_reset_lists(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ int i;
+ struct tlan_list *list;
+ dma_addr_t list_phys;
+ struct sk_buff *skb;
+
+ priv->tx_head = 0;
+ priv->tx_tail = 0;
+ for (i = 0; i < TLAN_NUM_TX_LISTS; i++) {
+ list = priv->tx_list + i;
+ list->c_stat = TLAN_CSTAT_UNUSED;
+ list->buffer[0].address = 0;
+ list->buffer[2].count = 0;
+ list->buffer[2].address = 0;
+ list->buffer[8].address = 0;
+ list->buffer[9].address = 0;
+ }
+
+ priv->rx_head = 0;
+ priv->rx_tail = TLAN_NUM_RX_LISTS - 1;
+ for (i = 0; i < TLAN_NUM_RX_LISTS; i++) {
+ list = priv->rx_list + i;
+ list_phys = priv->rx_list_dma + sizeof(struct tlan_list)*i;
+ list->c_stat = TLAN_CSTAT_READY;
+ list->frame_size = TLAN_MAX_FRAME_SIZE;
+ list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
+ skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5);
+ if (!skb)
+ break;
+
+ list->buffer[0].address = pci_map_single(priv->pci_dev,
+ skb->data,
+ TLAN_MAX_FRAME_SIZE,
+ PCI_DMA_FROMDEVICE);
+ tlan_store_skb(list, skb);
+ list->buffer[1].count = 0;
+ list->buffer[1].address = 0;
+ list->forward = list_phys + sizeof(struct tlan_list);
+ }
+
+ /* in case ran out of memory early, clear bits */
+ while (i < TLAN_NUM_RX_LISTS) {
+ tlan_store_skb(priv->rx_list + i, NULL);
+ ++i;
+ }
+ list->forward = 0;
+
+}
+
+
+static void tlan_free_lists(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ int i;
+ struct tlan_list *list;
+ struct sk_buff *skb;
+
+ for (i = 0; i < TLAN_NUM_TX_LISTS; i++) {
+ list = priv->tx_list + i;
+ skb = tlan_get_skb(list);
+ if (skb) {
+ pci_unmap_single(
+ priv->pci_dev,
+ list->buffer[0].address,
+ max(skb->len,
+ (unsigned int)TLAN_MIN_FRAME_SIZE),
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(skb);
+ list->buffer[8].address = 0;
+ list->buffer[9].address = 0;
+ }
+ }
+
+ for (i = 0; i < TLAN_NUM_RX_LISTS; i++) {
+ list = priv->rx_list + i;
+ skb = tlan_get_skb(list);
+ if (skb) {
+ pci_unmap_single(priv->pci_dev,
+ list->buffer[0].address,
+ TLAN_MAX_FRAME_SIZE,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb_any(skb);
+ list->buffer[8].address = 0;
+ list->buffer[9].address = 0;
+ }
+ }
+}
+
+
+
+
+/***************************************************************
+ * tlan_print_dio
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * io_base Base IO port of the device of
+ * which to print DIO registers.
+ *
+ * This function prints out all the internal (DIO)
+ * registers of a TLAN chip.
+ *
+ **************************************************************/
+
+static void tlan_print_dio(u16 io_base)
+{
+ u32 data0, data1;
+ int i;
+
+ pr_info("Contents of internal registers for io base 0x%04hx\n",
+ io_base);
+ pr_info("Off. +0 +4\n");
+ for (i = 0; i < 0x4C; i += 8) {
+ data0 = tlan_dio_read32(io_base, i);
+ data1 = tlan_dio_read32(io_base, i + 0x4);
+ pr_info("0x%02x 0x%08x 0x%08x\n", i, data0, data1);
+ }
+
+}
+
+
+
+
+/***************************************************************
+ * TLan_PrintList
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * list A pointer to the struct tlan_list structure to
+ * be printed.
+ * type A string to designate type of list,
+ * "Rx" or "Tx".
+ * num The index of the list.
+ *
+ * This function prints out the contents of the list
+ * pointed to by the list parameter.
+ *
+ **************************************************************/
+
+static void tlan_print_list(struct tlan_list *list, char *type, int num)
+{
+ int i;
+
+ pr_info("%s List %d at %p\n", type, num, list);
+ pr_info(" Forward = 0x%08x\n", list->forward);
+ pr_info(" CSTAT = 0x%04hx\n", list->c_stat);
+ pr_info(" Frame Size = 0x%04hx\n", list->frame_size);
+ /* for (i = 0; i < 10; i++) { */
+ for (i = 0; i < 2; i++) {
+ pr_info(" Buffer[%d].count, addr = 0x%08x, 0x%08x\n",
+ i, list->buffer[i].count, list->buffer[i].address);
+ }
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_read_and_clear_stats
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev Pointer to device structure of adapter
+ * to which to read stats.
+ * record Flag indicating whether to add
+ *
+ * This functions reads all the internal status registers
+ * of the TLAN chip, which clears them as a side effect.
+ * It then either adds the values to the device's status
+ * struct, or discards them, depending on whether record
+ * is TLAN_RECORD (!=0) or TLAN_IGNORE (==0).
+ *
+ **************************************************************/
+
+static void tlan_read_and_clear_stats(struct net_device *dev, int record)
+{
+ u32 tx_good, tx_under;
+ u32 rx_good, rx_over;
+ u32 def_tx, crc, code;
+ u32 multi_col, single_col;
+ u32 excess_col, late_col, loss;
+
+ outw(TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR);
+ tx_good = inb(dev->base_addr + TLAN_DIO_DATA);
+ tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
+ tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16;
+ tx_under = inb(dev->base_addr + TLAN_DIO_DATA + 3);
+
+ outw(TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR);
+ rx_good = inb(dev->base_addr + TLAN_DIO_DATA);
+ rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
+ rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16;
+ rx_over = inb(dev->base_addr + TLAN_DIO_DATA + 3);
+
+ outw(TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR);
+ def_tx = inb(dev->base_addr + TLAN_DIO_DATA);
+ def_tx += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
+ crc = inb(dev->base_addr + TLAN_DIO_DATA + 2);
+ code = inb(dev->base_addr + TLAN_DIO_DATA + 3);
+
+ outw(TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR);
+ multi_col = inb(dev->base_addr + TLAN_DIO_DATA);
+ multi_col += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
+ single_col = inb(dev->base_addr + TLAN_DIO_DATA + 2);
+ single_col += inb(dev->base_addr + TLAN_DIO_DATA + 3) << 8;
+
+ outw(TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR);
+ excess_col = inb(dev->base_addr + TLAN_DIO_DATA);
+ late_col = inb(dev->base_addr + TLAN_DIO_DATA + 1);
+ loss = inb(dev->base_addr + TLAN_DIO_DATA + 2);
+
+ if (record) {
+ dev->stats.rx_packets += rx_good;
+ dev->stats.rx_errors += rx_over + crc + code;
+ dev->stats.tx_packets += tx_good;
+ dev->stats.tx_errors += tx_under + loss;
+ dev->stats.collisions += multi_col
+ + single_col + excess_col + late_col;
+
+ dev->stats.rx_over_errors += rx_over;
+ dev->stats.rx_crc_errors += crc;
+ dev->stats.rx_frame_errors += code;
+
+ dev->stats.tx_aborted_errors += tx_under;
+ dev->stats.tx_carrier_errors += loss;
+ }
+
+}
+
+
+
+
+/***************************************************************
+ * TLan_Reset
+ *
+ * Returns:
+ * 0
+ * Parms:
+ * dev Pointer to device structure of adapter
+ * to be reset.
+ *
+ * This function resets the adapter and it's physical
+ * device. See Chap. 3, pp. 9-10 of the "ThunderLAN
+ * Programmer's Guide" for details. The routine tries to
+ * implement what is detailed there, though adjustments
+ * have been made.
+ *
+ **************************************************************/
+
+static void
+tlan_reset_adapter(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ int i;
+ u32 addr;
+ u32 data;
+ u8 data8;
+
+ priv->tlan_full_duplex = false;
+ priv->phy_online = 0;
+ netif_carrier_off(dev);
+
+/* 1. Assert reset bit. */
+
+ data = inl(dev->base_addr + TLAN_HOST_CMD);
+ data |= TLAN_HC_AD_RST;
+ outl(data, dev->base_addr + TLAN_HOST_CMD);
+
+ udelay(1000);
+
+/* 2. Turn off interrupts. (Probably isn't necessary) */
+
+ data = inl(dev->base_addr + TLAN_HOST_CMD);
+ data |= TLAN_HC_INT_OFF;
+ outl(data, dev->base_addr + TLAN_HOST_CMD);
+
+/* 3. Clear AREGs and HASHs. */
+
+ for (i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4)
+ tlan_dio_write32(dev->base_addr, (u16) i, 0);
+
+/* 4. Setup NetConfig register. */
+
+ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
+ tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data);
+
+/* 5. Load Ld_Tmr and Ld_Thr in HOST_CMD. */
+
+ outl(TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD);
+ outl(TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD);
+
+/* 6. Unreset the MII by setting NMRST (in NetSio) to 1. */
+
+ outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
+ addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+ tlan_set_bit(TLAN_NET_SIO_NMRST, addr);
+
+/* 7. Setup the remaining registers. */
+
+ if (priv->tlan_rev >= 0x30) {
+ data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
+ tlan_dio_write8(dev->base_addr, TLAN_INT_DIS, data8);
+ }
+ tlan_phy_detect(dev);
+ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
+
+ if (priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY) {
+ data |= TLAN_NET_CFG_BIT;
+ if (priv->aui == 1) {
+ tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x0a);
+ } else if (priv->duplex == TLAN_DUPLEX_FULL) {
+ tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x00);
+ priv->tlan_full_duplex = true;
+ } else {
+ tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x08);
+ }
+ }
+
+ /* don't power down internal PHY if we're going to use it */
+ if (priv->phy_num == 0 ||
+ (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10))
+ data |= TLAN_NET_CFG_PHY_EN;
+ tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data);
+
+ if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY)
+ tlan_finish_reset(dev);
+ else
+ tlan_phy_power_down(dev);
+
+}
+
+
+
+
+static void
+tlan_finish_reset(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u8 data;
+ u32 phy;
+ u8 sio;
+ u16 status;
+ u16 partner;
+ u16 tlphy_ctl;
+ u16 tlphy_par;
+ u16 tlphy_id1, tlphy_id2;
+ int i;
+
+ phy = priv->phy[priv->phy_num];
+
+ data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
+ if (priv->tlan_full_duplex)
+ data |= TLAN_NET_CMD_DUPLEX;
+ tlan_dio_write8(dev->base_addr, TLAN_NET_CMD, data);
+ data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5;
+ if (priv->phy_num == 0)
+ data |= TLAN_NET_MASK_MASK7;
+ tlan_dio_write8(dev->base_addr, TLAN_NET_MASK, data);
+ tlan_dio_write16(dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7);
+ tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &tlphy_id1);
+ tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &tlphy_id2);
+
+ if ((priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) ||
+ (priv->aui)) {
+ status = MII_GS_LINK;
+ netdev_info(dev, "Link forced\n");
+ } else {
+ tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
+ udelay(1000);
+ tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
+ if (status & MII_GS_LINK) {
+ /* We only support link info on Nat.Sem. PHY's */
+ if ((tlphy_id1 == NAT_SEM_ID1) &&
+ (tlphy_id2 == NAT_SEM_ID2)) {
+ tlan_mii_read_reg(dev, phy, MII_AN_LPA,
+ &partner);
+ tlan_mii_read_reg(dev, phy, TLAN_TLPHY_PAR,
+ &tlphy_par);
+
+ netdev_info(dev,
+ "Link active, %s %uMbps %s-Duplex\n",
+ !(tlphy_par & TLAN_PHY_AN_EN_STAT)
+ ? "forced" : "Autonegotiation enabled,",
+ tlphy_par & TLAN_PHY_SPEED_100
+ ? 100 : 10,
+ tlphy_par & TLAN_PHY_DUPLEX_FULL
+ ? "Full" : "Half");
+
+ if (tlphy_par & TLAN_PHY_AN_EN_STAT) {
+ netdev_info(dev, "Partner capability:");
+ for (i = 5; i < 10; i++)
+ if (partner & (1 << i))
+ pr_cont(" %s",
+ media[i-5]);
+ pr_cont("\n");
+ }
+ } else
+ netdev_info(dev, "Link active\n");
+ /* Enabling link beat monitoring */
+ priv->media_timer.function = tlan_phy_monitor;
+ priv->media_timer.data = (unsigned long) dev;
+ priv->media_timer.expires = jiffies + HZ;
+ add_timer(&priv->media_timer);
+ }
+ }
+
+ if (priv->phy_num == 0) {
+ tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl);
+ tlphy_ctl |= TLAN_TC_INTEN;
+ tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
+ sio = tlan_dio_read8(dev->base_addr, TLAN_NET_SIO);
+ sio |= TLAN_NET_SIO_MINTEN;
+ tlan_dio_write8(dev->base_addr, TLAN_NET_SIO, sio);
+ }
+
+ if (status & MII_GS_LINK) {
+ tlan_set_mac(dev, 0, dev->dev_addr);
+ priv->phy_online = 1;
+ outb((TLAN_HC_INT_ON >> 8), dev->base_addr + TLAN_HOST_CMD + 1);
+ if (debug >= 1 && debug != TLAN_DEBUG_PROBE)
+ outb((TLAN_HC_REQ_INT >> 8),
+ dev->base_addr + TLAN_HOST_CMD + 1);
+ outl(priv->rx_list_dma, dev->base_addr + TLAN_CH_PARM);
+ outl(TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD);
+ tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK);
+ netif_carrier_on(dev);
+ } else {
+ netdev_info(dev, "Link inactive, will retry in 10 secs...\n");
+ tlan_set_timer(dev, (10*HZ), TLAN_TIMER_FINISH_RESET);
+ return;
+ }
+ tlan_set_multicast_list(dev);
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_set_mac
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev Pointer to device structure of adapter
+ * on which to change the AREG.
+ * areg The AREG to set the address in (0 - 3).
+ * mac A pointer to an array of chars. Each
+ * element stores one byte of the address.
+ * IE, it isn't in ascii.
+ *
+ * This function transfers a MAC address to one of the
+ * TLAN AREGs (address registers). The TLAN chip locks
+ * the register on writing to offset 0 and unlocks the
+ * register after writing to offset 5. If NULL is passed
+ * in mac, then the AREG is filled with 0's.
+ *
+ **************************************************************/
+
+static void tlan_set_mac(struct net_device *dev, int areg, char *mac)
+{
+ int i;
+
+ areg *= 6;
+
+ if (mac != NULL) {
+ for (i = 0; i < 6; i++)
+ tlan_dio_write8(dev->base_addr,
+ TLAN_AREG_0 + areg + i, mac[i]);
+ } else {
+ for (i = 0; i < 6; i++)
+ tlan_dio_write8(dev->base_addr,
+ TLAN_AREG_0 + areg + i, 0);
+ }
+
+}
+
+
+
+
+/*****************************************************************************
+******************************************************************************
+
+ThunderLAN driver PHY layer routines
+
+******************************************************************************
+*****************************************************************************/
+
+
+
+/*********************************************************************
+ * tlan_phy_print
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to the device structure of the
+ * TLAN device having the PHYs to be detailed.
+ *
+ * This function prints the registers a PHY (aka transceiver).
+ *
+ ********************************************************************/
+
+static void tlan_phy_print(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u16 i, data0, data1, data2, data3, phy;
+
+ phy = priv->phy[priv->phy_num];
+
+ if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) {
+ netdev_info(dev, "Unmanaged PHY\n");
+ } else if (phy <= TLAN_PHY_MAX_ADDR) {
+ netdev_info(dev, "PHY 0x%02x\n", phy);
+ pr_info(" Off. +0 +1 +2 +3\n");
+ for (i = 0; i < 0x20; i += 4) {
+ tlan_mii_read_reg(dev, phy, i, &data0);
+ tlan_mii_read_reg(dev, phy, i + 1, &data1);
+ tlan_mii_read_reg(dev, phy, i + 2, &data2);
+ tlan_mii_read_reg(dev, phy, i + 3, &data3);
+ pr_info(" 0x%02x 0x%04hx 0x%04hx 0x%04hx 0x%04hx\n",
+ i, data0, data1, data2, data3);
+ }
+ } else {
+ netdev_info(dev, "Invalid PHY\n");
+ }
+
+}
+
+
+
+
+/*********************************************************************
+ * tlan_phy_detect
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to the device structure of the adapter
+ * for which the PHY needs determined.
+ *
+ * So far I've found that adapters which have external PHYs
+ * may also use the internal PHY for part of the functionality.
+ * (eg, AUI/Thinnet). This function finds out if this TLAN
+ * chip has an internal PHY, and then finds the first external
+ * PHY (starting from address 0) if it exists).
+ *
+ ********************************************************************/
+
+static void tlan_phy_detect(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u16 control;
+ u16 hi;
+ u16 lo;
+ u32 phy;
+
+ if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) {
+ priv->phy_num = 0xffff;
+ return;
+ }
+
+ tlan_mii_read_reg(dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi);
+
+ if (hi != 0xffff)
+ priv->phy[0] = TLAN_PHY_MAX_ADDR;
+ else
+ priv->phy[0] = TLAN_PHY_NONE;
+
+ priv->phy[1] = TLAN_PHY_NONE;
+ for (phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++) {
+ tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &control);
+ tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &hi);
+ tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &lo);
+ if ((control != 0xffff) ||
+ (hi != 0xffff) || (lo != 0xffff)) {
+ TLAN_DBG(TLAN_DEBUG_GNRL,
+ "PHY found at %02x %04x %04x %04x\n",
+ phy, control, hi, lo);
+ if ((priv->phy[1] == TLAN_PHY_NONE) &&
+ (phy != TLAN_PHY_MAX_ADDR)) {
+ priv->phy[1] = phy;
+ }
+ }
+ }
+
+ if (priv->phy[1] != TLAN_PHY_NONE)
+ priv->phy_num = 1;
+ else if (priv->phy[0] != TLAN_PHY_NONE)
+ priv->phy_num = 0;
+ else
+ netdev_info(dev, "Cannot initialize device, no PHY was found!\n");
+
+}
+
+
+
+
+static void tlan_phy_power_down(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u16 value;
+
+ TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name);
+ value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
+ tlan_mii_sync(dev->base_addr);
+ tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value);
+ if ((priv->phy_num == 0) && (priv->phy[1] != TLAN_PHY_NONE)) {
+ /* if using internal PHY, the external PHY must be powered on */
+ if (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10)
+ value = MII_GC_ISOLATE; /* just isolate it from MII */
+ tlan_mii_sync(dev->base_addr);
+ tlan_mii_write_reg(dev, priv->phy[1], MII_GEN_CTL, value);
+ }
+
+ /* Wait for 50 ms and powerup
+ * This is abitrary. It is intended to make sure the
+ * transceiver settles.
+ */
+ tlan_set_timer(dev, msecs_to_jiffies(50), TLAN_TIMER_PHY_PUP);
+
+}
+
+
+
+
+static void tlan_phy_power_up(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u16 value;
+
+ TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name);
+ tlan_mii_sync(dev->base_addr);
+ value = MII_GC_LOOPBK;
+ tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value);
+ tlan_mii_sync(dev->base_addr);
+ /* Wait for 500 ms and reset the
+ * transceiver. The TLAN docs say both 50 ms and
+ * 500 ms, so do the longer, just in case.
+ */
+ tlan_set_timer(dev, msecs_to_jiffies(500), TLAN_TIMER_PHY_RESET);
+
+}
+
+
+
+
+static void tlan_phy_reset(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u16 phy;
+ u16 value;
+ unsigned long timeout = jiffies + HZ;
+
+ phy = priv->phy[priv->phy_num];
+
+ TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Resetting PHY.\n", dev->name);
+ tlan_mii_sync(dev->base_addr);
+ value = MII_GC_LOOPBK | MII_GC_RESET;
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL, value);
+ do {
+ tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &value);
+ if (time_after(jiffies, timeout)) {
+ netdev_err(dev, "PHY reset timeout\n");
+ return;
+ }
+ } while (value & MII_GC_RESET);
+
+ /* Wait for 500 ms and initialize.
+ * I don't remember why I wait this long.
+ * I've changed this to 50ms, as it seems long enough.
+ */
+ tlan_set_timer(dev, msecs_to_jiffies(50), TLAN_TIMER_PHY_START_LINK);
+
+}
+
+
+
+
+static void tlan_phy_start_link(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u16 ability;
+ u16 control;
+ u16 data;
+ u16 phy;
+ u16 status;
+ u16 tctl;
+
+ phy = priv->phy[priv->phy_num];
+ TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name);
+ tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
+ tlan_mii_read_reg(dev, phy, MII_GEN_STS, &ability);
+
+ if ((status & MII_GS_AUTONEG) &&
+ (!priv->aui)) {
+ ability = status >> 11;
+ if (priv->speed == TLAN_SPEED_10 &&
+ priv->duplex == TLAN_DUPLEX_HALF) {
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0000);
+ } else if (priv->speed == TLAN_SPEED_10 &&
+ priv->duplex == TLAN_DUPLEX_FULL) {
+ priv->tlan_full_duplex = true;
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0100);
+ } else if (priv->speed == TLAN_SPEED_100 &&
+ priv->duplex == TLAN_DUPLEX_HALF) {
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2000);
+ } else if (priv->speed == TLAN_SPEED_100 &&
+ priv->duplex == TLAN_DUPLEX_FULL) {
+ priv->tlan_full_duplex = true;
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2100);
+ } else {
+
+ /* Set Auto-Neg advertisement */
+ tlan_mii_write_reg(dev, phy, MII_AN_ADV,
+ (ability << 5) | 1);
+ /* Enablee Auto-Neg */
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1000);
+ /* Restart Auto-Neg */
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1200);
+ /* Wait for 4 sec for autonegotiation
+ * to complete. The max spec time is less than this
+ * but the card need additional time to start AN.
+ * .5 sec should be plenty extra.
+ */
+ netdev_info(dev, "Starting autonegotiation\n");
+ tlan_set_timer(dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN);
+ return;
+ }
+
+ }
+
+ if ((priv->aui) && (priv->phy_num != 0)) {
+ priv->phy_num = 0;
+ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN
+ | TLAN_NET_CFG_PHY_EN;
+ tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, data);
+ tlan_set_timer(dev, msecs_to_jiffies(40), TLAN_TIMER_PHY_PDOWN);
+ return;
+ } else if (priv->phy_num == 0) {
+ control = 0;
+ tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tctl);
+ if (priv->aui) {
+ tctl |= TLAN_TC_AUISEL;
+ } else {
+ tctl &= ~TLAN_TC_AUISEL;
+ if (priv->duplex == TLAN_DUPLEX_FULL) {
+ control |= MII_GC_DUPLEX;
+ priv->tlan_full_duplex = true;
+ }
+ if (priv->speed == TLAN_SPEED_100)
+ control |= MII_GC_SPEEDSEL;
+ }
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL, control);
+ tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tctl);
+ }
+
+ /* Wait for 2 sec to give the transceiver time
+ * to establish link.
+ */
+ tlan_set_timer(dev, (4*HZ), TLAN_TIMER_FINISH_RESET);
+
+}
+
+
+
+
+static void tlan_phy_finish_auto_neg(struct net_device *dev)
+{
+ struct tlan_priv *priv = netdev_priv(dev);
+ u16 an_adv;
+ u16 an_lpa;
+ u16 mode;
+ u16 phy;
+ u16 status;
+
+ phy = priv->phy[priv->phy_num];
+
+ tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
+ udelay(1000);
+ tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
+
+ if (!(status & MII_GS_AUTOCMPLT)) {
+ /* Wait for 8 sec to give the process
+ * more time. Perhaps we should fail after a while.
+ */
+ tlan_set_timer(dev, 2 * HZ, TLAN_TIMER_PHY_FINISH_AN);
+ return;
+ }
+
+ netdev_info(dev, "Autonegotiation complete\n");
+ tlan_mii_read_reg(dev, phy, MII_AN_ADV, &an_adv);
+ tlan_mii_read_reg(dev, phy, MII_AN_LPA, &an_lpa);
+ mode = an_adv & an_lpa & 0x03E0;
+ if (mode & 0x0100)
+ priv->tlan_full_duplex = true;
+ else if (!(mode & 0x0080) && (mode & 0x0040))
+ priv->tlan_full_duplex = true;
+
+ /* switch to internal PHY for 10 Mbps */
+ if ((!(mode & 0x0180)) &&
+ (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) &&
+ (priv->phy_num != 0)) {
+ priv->phy_num = 0;
+ tlan_set_timer(dev, msecs_to_jiffies(400), TLAN_TIMER_PHY_PDOWN);
+ return;
+ }
+
+ if (priv->phy_num == 0) {
+ if ((priv->duplex == TLAN_DUPLEX_FULL) ||
+ (an_adv & an_lpa & 0x0040)) {
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL,
+ MII_GC_AUTOENB | MII_GC_DUPLEX);
+ netdev_info(dev, "Starting internal PHY with FULL-DUPLEX\n");
+ } else {
+ tlan_mii_write_reg(dev, phy, MII_GEN_CTL,
+ MII_GC_AUTOENB);
+ netdev_info(dev, "Starting internal PHY with HALF-DUPLEX\n");
+ }
+ }
+
+ /* Wait for 100 ms. No reason in partiticular.
+ */
+ tlan_set_timer(dev, msecs_to_jiffies(100), TLAN_TIMER_FINISH_RESET);
+
+}
+
+
+/*********************************************************************
+ *
+ * tlan_phy_monitor
+ *
+ * Returns:
+ * None
+ *
+ * Params:
+ * data The device structure of this device.
+ *
+ *
+ * This function monitors PHY condition by reading the status
+ * register via the MII bus, controls LINK LED and notifies the
+ * kernel about link state.
+ *
+ *******************************************************************/
+
+static void tlan_phy_monitor(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct tlan_priv *priv = netdev_priv(dev);
+ u16 phy;
+ u16 phy_status;
+
+ phy = priv->phy[priv->phy_num];
+
+ /* Get PHY status register */
+ tlan_mii_read_reg(dev, phy, MII_GEN_STS, &phy_status);
+
+ /* Check if link has been lost */
+ if (!(phy_status & MII_GS_LINK)) {
+ if (netif_carrier_ok(dev)) {
+ printk(KERN_DEBUG "TLAN: %s has lost link\n",
+ dev->name);
+ tlan_dio_write8(dev->base_addr, TLAN_LED_REG, 0);
+ netif_carrier_off(dev);
+ if (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) {
+ /* power down internal PHY */
+ u16 data = MII_GC_PDOWN | MII_GC_LOOPBK |
+ MII_GC_ISOLATE;
+
+ tlan_mii_sync(dev->base_addr);
+ tlan_mii_write_reg(dev, priv->phy[0],
+ MII_GEN_CTL, data);
+ /* set to external PHY */
+ priv->phy_num = 1;
+ /* restart autonegotiation */
+ tlan_set_timer(dev, msecs_to_jiffies(400),
+ TLAN_TIMER_PHY_PDOWN);
+ return;
+ }
+ }
+ }
+
+ /* Link restablished? */
+ if ((phy_status & MII_GS_LINK) && !netif_carrier_ok(dev)) {
+ tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK);
+ printk(KERN_DEBUG "TLAN: %s has reestablished link\n",
+ dev->name);
+ netif_carrier_on(dev);
+ }
+ priv->media_timer.expires = jiffies + HZ;
+ add_timer(&priv->media_timer);
+}
+
+
+/*****************************************************************************
+******************************************************************************
+
+ThunderLAN driver MII routines
+
+these routines are based on the information in chap. 2 of the
+"ThunderLAN Programmer's Guide", pp. 15-24.
+
+******************************************************************************
+*****************************************************************************/
+
+
+/***************************************************************
+ * tlan_mii_read_reg
+ *
+ * Returns:
+ * false if ack received ok
+ * true if no ack received or other error
+ *
+ * Parms:
+ * dev The device structure containing
+ * The io address and interrupt count
+ * for this device.
+ * phy The address of the PHY to be queried.
+ * reg The register whose contents are to be
+ * retrieved.
+ * val A pointer to a variable to store the
+ * retrieved value.
+ *
+ * This function uses the TLAN's MII bus to retrieve the contents
+ * of a given register on a PHY. It sends the appropriate info
+ * and then reads the 16-bit register value from the MII bus via
+ * the TLAN SIO register.
+ *
+ **************************************************************/
+
+static bool
+tlan_mii_read_reg(struct net_device *dev, u16 phy, u16 reg, u16 *val)
+{
+ u8 nack;
+ u16 sio, tmp;
+ u32 i;
+ bool err;
+ int minten;
+ struct tlan_priv *priv = netdev_priv(dev);
+ unsigned long flags = 0;
+
+ err = false;
+ outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
+ sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ if (!in_irq())
+ spin_lock_irqsave(&priv->lock, flags);
+
+ tlan_mii_sync(dev->base_addr);
+
+ minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio);
+ if (minten)
+ tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio);
+
+ tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */
+ tlan_mii_send_data(dev->base_addr, 0x2, 2); /* read (10b) */
+ tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */
+ tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */
+
+
+ tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio); /* change direction */
+
+ tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* clock idle bit */
+ tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
+ tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* wait 300ns */
+
+ nack = tlan_get_bit(TLAN_NET_SIO_MDATA, sio); /* check for ACK */
+ tlan_set_bit(TLAN_NET_SIO_MCLK, sio); /* finish ACK */
+ if (nack) { /* no ACK, so fake it */
+ for (i = 0; i < 16; i++) {
+ tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
+ tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
+ }
+ tmp = 0xffff;
+ err = true;
+ } else { /* ACK, so read data */
+ for (tmp = 0, i = 0x8000; i; i >>= 1) {
+ tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
+ if (tlan_get_bit(TLAN_NET_SIO_MDATA, sio))
+ tmp |= i;
+ tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
+ }
+ }
+
+
+ tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */
+ tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
+
+ if (minten)
+ tlan_set_bit(TLAN_NET_SIO_MINTEN, sio);
+
+ *val = tmp;
+
+ if (!in_irq())
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return err;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_mii_send_data
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * base_port The base IO port of the adapter in
+ * question.
+ * dev The address of the PHY to be queried.
+ * data The value to be placed on the MII bus.
+ * num_bits The number of bits in data that are to
+ * be placed on the MII bus.
+ *
+ * This function sends on sequence of bits on the MII
+ * configuration bus.
+ *
+ **************************************************************/
+
+static void tlan_mii_send_data(u16 base_port, u32 data, unsigned num_bits)
+{
+ u16 sio;
+ u32 i;
+
+ if (num_bits == 0)
+ return;
+
+ outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
+ sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
+ tlan_set_bit(TLAN_NET_SIO_MTXEN, sio);
+
+ for (i = (0x1 << (num_bits - 1)); i; i >>= 1) {
+ tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
+ (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio);
+ if (data & i)
+ tlan_set_bit(TLAN_NET_SIO_MDATA, sio);
+ else
+ tlan_clear_bit(TLAN_NET_SIO_MDATA, sio);
+ tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
+ (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio);
+ }
+
+}
+
+
+
+
+/***************************************************************
+ * TLan_MiiSync
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * base_port The base IO port of the adapter in
+ * question.
+ *
+ * This functions syncs all PHYs in terms of the MII configuration
+ * bus.
+ *
+ **************************************************************/
+
+static void tlan_mii_sync(u16 base_port)
+{
+ int i;
+ u16 sio;
+
+ outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
+ sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio);
+ for (i = 0; i < 32; i++) {
+ tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
+ tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
+ }
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_mii_write_reg
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev The device structure for the device
+ * to write to.
+ * phy The address of the PHY to be written to.
+ * reg The register whose contents are to be
+ * written.
+ * val The value to be written to the register.
+ *
+ * This function uses the TLAN's MII bus to write the contents of a
+ * given register on a PHY. It sends the appropriate info and then
+ * writes the 16-bit register value from the MII configuration bus
+ * via the TLAN SIO register.
+ *
+ **************************************************************/
+
+static void
+tlan_mii_write_reg(struct net_device *dev, u16 phy, u16 reg, u16 val)
+{
+ u16 sio;
+ int minten;
+ unsigned long flags = 0;
+ struct tlan_priv *priv = netdev_priv(dev);
+
+ outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
+ sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ if (!in_irq())
+ spin_lock_irqsave(&priv->lock, flags);
+
+ tlan_mii_sync(dev->base_addr);
+
+ minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio);
+ if (minten)
+ tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio);
+
+ tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */
+ tlan_mii_send_data(dev->base_addr, 0x1, 2); /* write (01b) */
+ tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */
+ tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */
+
+ tlan_mii_send_data(dev->base_addr, 0x2, 2); /* send ACK */
+ tlan_mii_send_data(dev->base_addr, val, 16); /* send data */
+
+ tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */
+ tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
+
+ if (minten)
+ tlan_set_bit(TLAN_NET_SIO_MINTEN, sio);
+
+ if (!in_irq())
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+}
+
+
+
+
+/*****************************************************************************
+******************************************************************************
+
+ThunderLAN driver eeprom routines
+
+the Compaq netelligent 10 and 10/100 cards use a microchip 24C02A
+EEPROM. these functions are based on information in microchip's
+data sheet. I don't know how well this functions will work with
+other Eeproms.
+
+******************************************************************************
+*****************************************************************************/
+
+
+/***************************************************************
+ * tlan_ee_send_start
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ *
+ * This function sends a start cycle to an EEPROM attached
+ * to a TLAN chip.
+ *
+ **************************************************************/
+
+static void tlan_ee_send_start(u16 io_base)
+{
+ u16 sio;
+
+ outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
+ sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
+ tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
+ tlan_set_bit(TLAN_NET_SIO_ETXEN, sio);
+ tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
+ tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_ee_send_byte
+ *
+ * Returns:
+ * If the correct ack was received, 0, otherwise 1
+ * Parms: io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ * data The 8 bits of information to
+ * send to the EEPROM.
+ * stop If TLAN_EEPROM_STOP is passed, a
+ * stop cycle is sent after the
+ * byte is sent after the ack is
+ * read.
+ *
+ * This function sends a byte on the serial EEPROM line,
+ * driving the clock to send each bit. The function then
+ * reverses transmission direction and reads an acknowledge
+ * bit.
+ *
+ **************************************************************/
+
+static int tlan_ee_send_byte(u16 io_base, u8 data, int stop)
+{
+ int err;
+ u8 place;
+ u16 sio;
+
+ outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
+ sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ /* Assume clock is low, tx is enabled; */
+ for (place = 0x80; place != 0; place >>= 1) {
+ if (place & data)
+ tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
+ else
+ tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
+ tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
+ tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
+ }
+ tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio);
+ tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
+ err = tlan_get_bit(TLAN_NET_SIO_EDATA, sio);
+ tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
+ tlan_set_bit(TLAN_NET_SIO_ETXEN, sio);
+
+ if ((!err) && stop) {
+ /* STOP, raise data while clock is high */
+ tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
+ tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
+ tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
+ }
+
+ return err;
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_ee_receive_byte
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ * data An address to a char to hold the
+ * data sent from the EEPROM.
+ * stop If TLAN_EEPROM_STOP is passed, a
+ * stop cycle is sent after the
+ * byte is received, and no ack is
+ * sent.
+ *
+ * This function receives 8 bits of data from the EEPROM
+ * over the serial link. It then sends and ack bit, or no
+ * ack and a stop bit. This function is used to retrieve
+ * data after the address of a byte in the EEPROM has been
+ * sent.
+ *
+ **************************************************************/
+
+static void tlan_ee_receive_byte(u16 io_base, u8 *data, int stop)
+{
+ u8 place;
+ u16 sio;
+
+ outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
+ sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+ *data = 0;
+
+ /* Assume clock is low, tx is enabled; */
+ tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio);
+ for (place = 0x80; place; place >>= 1) {
+ tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
+ if (tlan_get_bit(TLAN_NET_SIO_EDATA, sio))
+ *data |= place;
+ tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
+ }
+
+ tlan_set_bit(TLAN_NET_SIO_ETXEN, sio);
+ if (!stop) {
+ tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); /* ack = 0 */
+ tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
+ tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
+ } else {
+ tlan_set_bit(TLAN_NET_SIO_EDATA, sio); /* no ack = 1 (?) */
+ tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
+ tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
+ /* STOP, raise data while clock is high */
+ tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
+ tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
+ tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
+ }
+
+}
+
+
+
+
+/***************************************************************
+ * tlan_ee_read_byte
+ *
+ * Returns:
+ * No error = 0, else, the stage at which the error
+ * occurred.
+ * Parms:
+ * io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ * ee_addr The address of the byte in the
+ * EEPROM whose contents are to be
+ * retrieved.
+ * data An address to a char to hold the
+ * data obtained from the EEPROM.
+ *
+ * This function reads a byte of information from an byte
+ * cell in the EEPROM.
+ *
+ **************************************************************/
+
+static int tlan_ee_read_byte(struct net_device *dev, u8 ee_addr, u8 *data)
+{
+ int err;
+ struct tlan_priv *priv = netdev_priv(dev);
+ unsigned long flags = 0;
+ int ret = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ tlan_ee_send_start(dev->base_addr);
+ err = tlan_ee_send_byte(dev->base_addr, 0xa0, TLAN_EEPROM_ACK);
+ if (err) {
+ ret = 1;
+ goto fail;
+ }
+ err = tlan_ee_send_byte(dev->base_addr, ee_addr, TLAN_EEPROM_ACK);
+ if (err) {
+ ret = 2;
+ goto fail;
+ }
+ tlan_ee_send_start(dev->base_addr);
+ err = tlan_ee_send_byte(dev->base_addr, 0xa1, TLAN_EEPROM_ACK);
+ if (err) {
+ ret = 3;
+ goto fail;
+ }
+ tlan_ee_receive_byte(dev->base_addr, data, TLAN_EEPROM_STOP);
+fail:
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ret;
+
+}
+
+
+