Initial import

1 files changed, 287 insertions, 0 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
new file mode 100644
index 000000000..16604bdf5
--- /dev/null
+++ b/drivers/net/wireless/Kconfig
@@ -0,0 +1,287 @@
+#
+# Wireless LAN device configuration
+#
+
+menuconfig WLAN
+	bool "Wireless LAN"
+	depends on !S390
+	depends on NET
+	select WIRELESS
+	default y
+	---help---
+	  This section contains all the pre 802.11 and 802.11 wireless
+	  device drivers. For a complete list of drivers and documentation
+	  on them refer to the wireless wiki:
+
+	  http://wireless.kernel.org/en/users/Drivers
+
+if WLAN
+
+config PCMCIA_RAYCS
+	tristate "Aviator/Raytheon 2.4GHz wireless support"
+	depends on PCMCIA
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
+	---help---
+	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
+	  (PC-card) wireless Ethernet networking card to your computer.
+	  Please read the file <file:Documentation/networking/ray_cs.txt> for
+	  details.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ray_cs.  If unsure, say N.
+
+config LIBERTAS_THINFIRM
+	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
+	depends on MAC80211
+	select FW_LOADER
+	---help---
+	  A library for Marvell Libertas 8xxx devices using thinfirm.
+
+config LIBERTAS_THINFIRM_DEBUG
+	bool "Enable full debugging output in the Libertas thin firmware module."
+	depends on LIBERTAS_THINFIRM
+	---help---
+	  Debugging support.
+
+config LIBERTAS_THINFIRM_USB
+	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
+	depends on LIBERTAS_THINFIRM && USB
+	---help---
+	  A driver for Marvell Libertas 8388 USB devices using thinfirm.
+
+config AIRO
+	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
+	depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
+	select WIRELESS_EXT
+	select CRYPTO
+	select WEXT_SPY
+	select WEXT_PRIV
+	---help---
+	  This is the standard Linux driver to support Cisco/Aironet ISA and
+	  PCI 802.11 wireless cards.
+	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+	  - with or without encryption) as well as card before the Cisco
+	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+
+	  This driver support both the standard Linux Wireless Extensions
+	  and Cisco proprietary API, so both the Linux Wireless Tools and the
+	  Cisco Linux utilities can be used to configure the card.
+
+	  The driver can be compiled as a module and will be named "airo".
+
+config ATMEL
+      tristate "Atmel at76c50x chipset  802.11b support"
+      depends on CFG80211 && (PCI || PCMCIA)
+      select WIRELESS_EXT
+      select WEXT_PRIV
+      select FW_LOADER
+      select CRC32
+       ---help---
+        A driver 802.11b wireless cards based on the Atmel fast-vnet
+        chips. This driver supports standard Linux wireless extensions.
+
+        Many  cards based on this chipset do not have flash memory
+        and need their firmware loaded at start-up. If yours is
+        one of these, you will need to provide a firmware image
+        to be loaded into the card by the driver. The Atmel
+        firmware package can be downloaded from
+        <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+      tristate "Atmel at76c506 PCI cards"
+      depends on ATMEL && PCI
+       ---help---
+        Enable support for PCI and mini-PCI cards containing the
+        Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+	tristate "Atmel at76c502/at76c504 PCMCIA cards"
+	depends on ATMEL && PCMCIA
+	select WIRELESS_EXT
+	select FW_LOADER
+	select CRC32
+	---help---
+	  Enable support for PCMCIA cards containing the
+	  Atmel at76c502 and at76c504 chips.
+
+config AT76C50X_USB
+        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+        depends on MAC80211 && USB
+        select FW_LOADER
+        ---help---
+          Enable support for USB Wireless devices using Atmel at76c503,
+          at76c505 or at76c505a chips.
+
+config AIRO_CS
+	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
+	depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
+	select CRYPTO
+	select CRYPTO_AES
+	---help---
+	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
+	  802.11 wireless cards.  This driver is the same as the Aironet
+	  driver part of the Linux Pcmcia package.
+	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+	  - with or without encryption) as well as card before the Cisco
+	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
+	  802.11b cards.
+
+	  This driver support both the standard Linux Wireless Extensions
+	  and Cisco proprietary API, so both the Linux Wireless Tools and the
+	  Cisco Linux utilities can be used to configure the card.
+
+config PCMCIA_WL3501
+	tristate "Planet WL3501 PCMCIA cards"
+	depends on CFG80211 && PCMCIA
+	select WIRELESS_EXT
+	select WEXT_SPY
+	help
+	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
+	  It has basic support for Linux wireless extensions and initial
+	  micro support for ethtool.
+
+config PRISM54
+	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
+	depends on PCI
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
+	select FW_LOADER
+	---help---
+	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
+	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
+	  p54pci supports FullMAC PCI/Cardbus devices as well.
+
+	  For more information refer to the p54 wiki:
+
+	  http://wireless.kernel.org/en/users/Drivers/p54
+
+	  Note: You need a motherboard with DMA support to use any of these cards
+
+	  When built as module you get the module prism54
+
+config USB_ZD1201
+	tristate "USB ZD1201 based Wireless device support"
+	depends on CFG80211 && USB
+	select WIRELESS_EXT
+	select WEXT_PRIV
+	select FW_LOADER
+	---help---
+	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
+	  ZD1201 chip.
+
+	  This driver makes the adapter appear as a normal Ethernet interface,
+	  typically on wlan0.
+
+	  The zd1201 device requires external firmware to be loaded.
+	  This can be found at http://linux-lc100020.sourceforge.net/
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zd1201.
+
+config USB_NET_RNDIS_WLAN
+	tristate "Wireless RNDIS USB support"
+	depends on USB
+	depends on CFG80211
+	select USB_NET_DRIVERS
+	select USB_USBNET
+	select USB_NET_CDCETHER
+	select USB_NET_RNDIS_HOST
+	---help---
+	  This is a driver for wireless RNDIS devices.
+	  These are USB based adapters found in devices such as:
+
+	  Buffalo WLI-U2-KG125S
+	  U.S. Robotics USR5421
+	  Belkin F5D7051
+	  Linksys WUSB54GSv2
+	  Linksys WUSB54GSC
+	  Asus WL169gE
+	  Eminent EM4045
+	  BT Voyager 1055
+	  Linksys WUSB54GSv1
+	  U.S. Robotics USR5420
+	  BUFFALO WLI-USB-G54
+
+	  All of these devices are based on Broadcom 4320 chip which is the
+	  only wireless RNDIS chip known to date.
+
+	  If you choose to build a module, it'll be called rndis_wlan.
+
+source "drivers/net/wireless/rtl818x/Kconfig"
+
+config ADM8211
+	tristate "ADMtek ADM8211 support"
+	depends on MAC80211 && PCI
+	select CRC32
+	select EEPROM_93CX6
+	---help---
+	  This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
+	  These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
+
+	  Xterasys Cardbus XN-2411b
+	  Blitz NetWave Point PC
+	  TrendNet 221pc
+	  Belkin F5D6001
+	  SMC 2635W
+	  Linksys WPC11 v1
+	  Fiberline FL-WL-200X
+	  3com Office Connect (3CRSHPW796)
+	  Corega WLPCIB-11
+	  SMC 2602W V2 EU
+	  D-Link DWL-520 Revision C
+
+	  However, some of these cards have been replaced with other chips
+	  like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
+	  the Ralink RT2400 (SMC2635W) without a model number change.
+
+	  Thanks to Infineon-ADMtek for their support of this driver.
+
+config MAC80211_HWSIM
+	tristate "Simulated radio testing tool for mac80211"
+	depends on MAC80211
+	---help---
+	  This driver is a developer testing tool that can be used to test
+	  IEEE 802.11 networking stack (mac80211) functionality. This is not
+	  needed for normal wireless LAN usage and is only for testing. See
+	  Documentation/networking/mac80211_hwsim for more information on how
+	  to use this tool.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called mac80211_hwsim.  If unsure, say N.
+
+config MWL8K
+	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
+	depends on MAC80211 && PCI
+	---help---
+	  This driver supports Marvell TOPDOG 802.11 wireless cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mwl8k.  If unsure, say N.
+
+source "drivers/net/wireless/ath/Kconfig"
+source "drivers/net/wireless/b43/Kconfig"
+source "drivers/net/wireless/b43legacy/Kconfig"
+source "drivers/net/wireless/brcm80211/Kconfig"
+source "drivers/net/wireless/hostap/Kconfig"
+source "drivers/net/wireless/ipw2x00/Kconfig"
+source "drivers/net/wireless/iwlwifi/Kconfig"
+source "drivers/net/wireless/iwlegacy/Kconfig"
+source "drivers/net/wireless/libertas/Kconfig"
+source "drivers/net/wireless/orinoco/Kconfig"
+source "drivers/net/wireless/p54/Kconfig"
+source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/rtlwifi/Kconfig"
+source "drivers/net/wireless/ti/Kconfig"
+source "drivers/net/wireless/zd1211rw/Kconfig"
+source "drivers/net/wireless/mwifiex/Kconfig"
+source "drivers/net/wireless/cw1200/Kconfig"
+source "drivers/net/wireless/rsi/Kconfig"
+
+endif # WLAN