Linux-libre 4.5-gnu

1 files changed, 0 insertions, 208 deletions

diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h
deleted file mode 100644
index 5413c906a..000000000
--- a/drivers/net/wireless/b43/phy_g.h
+++ /dev/null
@@ -1,208 +0,0 @@
-#ifndef LINUX_B43_PHY_G_H_
-#define LINUX_B43_PHY_G_H_
-
-/* OFDM PHY registers are defined in the A-PHY header. */
-#include "phy_a.h"
-
-/* CCK (B) PHY Registers */
-#define B43_PHY_VERSION_CCK		B43_PHY_CCK(0x00)	/* Versioning register for B-PHY */
-#define B43_PHY_CCKBBANDCFG		B43_PHY_CCK(0x01)	/* Contains antenna 0/1 control bit */
-#define B43_PHY_PGACTL			B43_PHY_CCK(0x15)	/* PGA control */
-#define  B43_PHY_PGACTL_LPF		0x1000	/* Low pass filter (?) */
-#define  B43_PHY_PGACTL_LOWBANDW	0x0040	/* Low bandwidth flag */
-#define  B43_PHY_PGACTL_UNKNOWN		0xEFA0
-#define B43_PHY_FBCTL1			B43_PHY_CCK(0x18)	/* Frequency bandwidth control 1 */
-#define B43_PHY_ITSSI			B43_PHY_CCK(0x29)	/* Idle TSSI */
-#define B43_PHY_LO_LEAKAGE		B43_PHY_CCK(0x2D)	/* Measured LO leakage */
-#define B43_PHY_ENERGY			B43_PHY_CCK(0x33)	/* Energy */
-#define B43_PHY_SYNCCTL			B43_PHY_CCK(0x35)
-#define B43_PHY_FBCTL2			B43_PHY_CCK(0x38)	/* Frequency bandwidth control 2 */
-#define B43_PHY_DACCTL			B43_PHY_CCK(0x60)	/* DAC control */
-#define B43_PHY_RCCALOVER		B43_PHY_CCK(0x78)	/* RC calibration override */
-
-/* Extended G-PHY Registers */
-#define B43_PHY_CLASSCTL		B43_PHY_EXTG(0x02)	/* Classify control */
-#define B43_PHY_GTABCTL			B43_PHY_EXTG(0x03)	/* G-PHY table control (see below) */
-#define  B43_PHY_GTABOFF		0x03FF	/* G-PHY table offset (see below) */
-#define  B43_PHY_GTABNR			0xFC00	/* G-PHY table number (see below) */
-#define  B43_PHY_GTABNR_SHIFT		10
-#define B43_PHY_GTABDATA		B43_PHY_EXTG(0x04)	/* G-PHY table data */
-#define B43_PHY_LO_MASK			B43_PHY_EXTG(0x0F)	/* Local Oscillator control mask */
-#define B43_PHY_LO_CTL			B43_PHY_EXTG(0x10)	/* Local Oscillator control */
-#define B43_PHY_RFOVER			B43_PHY_EXTG(0x11)	/* RF override */
-#define B43_PHY_RFOVERVAL		B43_PHY_EXTG(0x12)	/* RF override value */
-#define  B43_PHY_RFOVERVAL_EXTLNA	0x8000
-#define  B43_PHY_RFOVERVAL_LNA		0x7000
-#define  B43_PHY_RFOVERVAL_LNA_SHIFT	12
-#define  B43_PHY_RFOVERVAL_PGA		0x0F00
-#define  B43_PHY_RFOVERVAL_PGA_SHIFT	8
-#define  B43_PHY_RFOVERVAL_UNK		0x0010	/* Unknown, always set. */
-#define  B43_PHY_RFOVERVAL_TRSWRX	0x00E0
-#define  B43_PHY_RFOVERVAL_BW		0x0003	/* Bandwidth flags */
-#define   B43_PHY_RFOVERVAL_BW_LPF	0x0001	/* Low Pass Filter */
-#define   B43_PHY_RFOVERVAL_BW_LBW	0x0002	/* Low Bandwidth (when set), high when unset */
-#define B43_PHY_ANALOGOVER		B43_PHY_EXTG(0x14)	/* Analog override */
-#define B43_PHY_ANALOGOVERVAL		B43_PHY_EXTG(0x15)	/* Analog override value */
-
-
-/*** G-PHY table numbers */
-#define B43_GTAB(number, offset)	(((number) << B43_PHY_GTABNR_SHIFT) | (offset))
-#define B43_GTAB_NRSSI			B43_GTAB(0x00, 0)
-#define B43_GTAB_TRFEMW			B43_GTAB(0x0C, 0x120)
-#define B43_GTAB_ORIGTR			B43_GTAB(0x2E, 0x298)
-
-u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset);
-void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value);
-
-
-/* Returns the boolean whether "TX Magnification" is enabled. */
-#define has_tx_magnification(phy) \
-	(((phy)->rev >= 2) &&			\
-	 ((phy)->radio_ver == 0x2050) &&	\
-	 ((phy)->radio_rev == 8))
-/* Card uses the loopback gain stuff */
-#define has_loopback_gain(phy) \
-	(((phy)->rev > 1) || ((phy)->gmode))
-
-/* Radio Attenuation (RF Attenuation) */
-struct b43_rfatt {
-	u8 att;			/* Attenuation value */
-	bool with_padmix;	/* Flag, PAD Mixer enabled. */
-};
-struct b43_rfatt_list {
-	/* Attenuation values list */
-	const struct b43_rfatt *list;
-	u8 len;
-	/* Minimum/Maximum attenuation values */
-	u8 min_val;
-	u8 max_val;
-};
-
-/* Returns true, if the values are the same. */
-static inline bool b43_compare_rfatt(const struct b43_rfatt *a,
-				     const struct b43_rfatt *b)
-{
-	return ((a->att == b->att) &&
-		(a->with_padmix == b->with_padmix));
-}
-
-/* Baseband Attenuation */
-struct b43_bbatt {
-	u8 att;			/* Attenuation value */
-};
-struct b43_bbatt_list {
-	/* Attenuation values list */
-	const struct b43_bbatt *list;
-	u8 len;
-	/* Minimum/Maximum attenuation values */
-	u8 min_val;
-	u8 max_val;
-};
-
-/* Returns true, if the values are the same. */
-static inline bool b43_compare_bbatt(const struct b43_bbatt *a,
-				     const struct b43_bbatt *b)
-{
-	return (a->att == b->att);
-}
-
-/* tx_control bits. */
-#define B43_TXCTL_PA3DB		0x40	/* PA Gain 3dB */
-#define B43_TXCTL_PA2DB		0x20	/* PA Gain 2dB */
-#define B43_TXCTL_TXMIX		0x10	/* TX Mixer Gain */
-
-struct b43_txpower_lo_control;
-
-struct b43_phy_g {
-	/* ACI (adjacent channel interference) flags. */
-	bool aci_enable;
-	bool aci_wlan_automatic;
-	bool aci_hw_rssi;
-
-	/* Radio switched on/off */
-	bool radio_on;
-	struct {
-		/* Values saved when turning the radio off.
-		 * They are needed when turning it on again. */
-		bool valid;
-		u16 rfover;
-		u16 rfoverval;
-	} radio_off_context;
-
-	u16 minlowsig[2];
-	u16 minlowsigpos[2];
-
-	/* Pointer to the table used to convert a
-	 * TSSI value to dBm-Q5.2 */
-	const s8 *tssi2dbm;
-	/* tssi2dbm is kmalloc()ed. Only used for free()ing. */
-	bool dyn_tssi_tbl;
-	/* Target idle TSSI */
-	int tgt_idle_tssi;
-	/* Current idle TSSI */
-	int cur_idle_tssi;
-	/* The current average TSSI. */
-	u8 average_tssi;
-	/* Current TX power level attenuation control values */
-	struct b43_bbatt bbatt;
-	struct b43_rfatt rfatt;
-	u8 tx_control;		/* B43_TXCTL_XXX */
-	/* The calculated attenuation deltas that are used later
-	 * when adjusting the actual power output. */
-	int bbatt_delta;
-	int rfatt_delta;
-
-	/* LocalOscillator control values. */
-	struct b43_txpower_lo_control *lo_control;
-	/* Values from b43_calc_loopback_gain() */
-	s16 max_lb_gain;	/* Maximum Loopback gain in hdB */
-	s16 trsw_rx_gain;	/* TRSW RX gain in hdB */
-	s16 lna_lod_gain;	/* LNA lod */
-	s16 lna_gain;		/* LNA */
-	s16 pga_gain;		/* PGA */
-
-	/* Current Interference Mitigation mode */
-	int interfmode;
-	/* Stack of saved values from the Interference Mitigation code.
-	 * Each value in the stack is laid out as follows:
-	 * bit 0-11:  offset
-	 * bit 12-15: register ID
-	 * bit 16-32: value
-	 * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
-	 */
-#define B43_INTERFSTACK_SIZE	26
-	u32 interfstack[B43_INTERFSTACK_SIZE];	//FIXME: use a data structure
-
-	/* Saved values from the NRSSI Slope calculation */
-	s16 nrssi[2];
-	s32 nrssislope;
-	/* In memory nrssi lookup table. */
-	s8 nrssi_lt[64];
-
-	u16 lofcal;
-
-	u16 initval;		//FIXME rename?
-
-	/* The device does address auto increment for the OFDM tables.
-	 * We cache the previously used address here and omit the address
-	 * write on the next table access, if possible. */
-	u16 ofdmtab_addr; /* The address currently set in hardware. */
-	enum { /* The last data flow direction. */
-		B43_OFDMTAB_DIRECTION_UNKNOWN = 0,
-		B43_OFDMTAB_DIRECTION_READ,
-		B43_OFDMTAB_DIRECTION_WRITE,
-	} ofdmtab_addr_direction;
-};
-
-void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev,
-				       u16 baseband_attenuation);
-void b43_gphy_channel_switch(struct b43_wldev *dev,
-			     unsigned int channel,
-			     bool synthetic_pu_workaround);
-u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev,
-				   s16 pab0, s16 pab1, s16 pab2);
-
-struct b43_phy_operations;
-extern const struct b43_phy_operations b43_phyops_g;
-
-#endif /* LINUX_B43_PHY_G_H_ */