Linux-libre 4.5-gnu

1 files changed, 0 insertions, 104 deletions

diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
deleted file mode 100644
index 1ffa28835..000000000
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-config B43LEGACY
-	tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
-	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
-	select SSB
-	select FW_LOADER
-	---help---
-	  b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
-	  BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the
-	  Linksys WPC54G V1 PCMCIA devices.
-
-	  Newer 802.11g and 802.11a devices need b43.
-
-	  It is safe to include both b43 and b43legacy as the underlying glue
-	  layer will automatically load the correct version for your device.
-
-	  This driver uses V3 firmware, which must be installed separately using
-	  b43-fwcutter.
-
-	  This driver can be built as a module (recommended) that will be
-	  called "b43legacy". If unsure, say M.
-
-# Auto-select SSB PCI-HOST support, if possible
-config B43LEGACY_PCI_AUTOSELECT
-	bool
-	depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
-	select SSB_PCIHOST
-	select SSB_B43_PCI_BRIDGE
-	default y
-
-# Auto-select SSB PCICORE driver, if possible
-config B43LEGACY_PCICORE_AUTOSELECT
-	bool
-	depends on B43LEGACY && SSB_DRIVER_PCICORE_POSSIBLE
-	select SSB_DRIVER_PCICORE
-	default y
-
-# LED support
-# This config option automatically enables b43legacy LEDS support,
-# if it's possible.
-config B43LEGACY_LEDS
-	bool
-	depends on B43LEGACY && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43LEGACY)
-	default y
-
-# This config option automatically enables b43 HW-RNG support,
-# if the HW-RNG core is enabled.
-config B43LEGACY_HWRNG
-	bool
-	depends on B43LEGACY && (HW_RANDOM = y || HW_RANDOM = B43LEGACY)
-	default y
-
-config B43LEGACY_DEBUG
-	bool "Broadcom 43xx-legacy debugging"
-	depends on B43LEGACY
-	default y
-	---help---
-	  Say Y, because this information will help you get the driver running.
-	  This option generates a minimum of log output.
-
-config B43LEGACY_DMA
-	bool
-	depends on B43LEGACY
-
-config B43LEGACY_PIO
-	bool
-	depends on B43LEGACY
-
-choice
-	prompt "Broadcom 43xx-legacy data transfer mode"
-	depends on B43LEGACY
-	default B43LEGACY_DMA_AND_PIO_MODE
-
-config B43LEGACY_DMA_AND_PIO_MODE
-	bool "DMA + PIO"
-	select B43LEGACY_DMA
-	select B43LEGACY_PIO
-	---help---
-	  Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
-	  data transfer modes. The mode actually used is selectable through
-	  the module parameter "pio". With pio=0 as a module parameter, the
-	  default DMA is used, otherwise PIO is used.
-
-	  If unsure, choose this option.
-
-config B43LEGACY_DMA_MODE
-	bool "DMA (Direct Memory Access) only"
-	select B43LEGACY_DMA
-	---help---
-	  Only include Direct Memory Access (DMA).
-	  This reduces the size of the driver module, by omitting the PIO code.
-
-config B43LEGACY_PIO_MODE
-	bool "PIO (Programmed I/O) only"
-	select B43LEGACY_PIO
-	---help---
-	  Only include Programmed I/O (PIO).
-	  This reduces the size of the driver module, by omitting the DMA code.
-	  Please note that PIO transfers are slow (compared to DMA).
-
-	  Also note that not all devices of the b43legacy series support PIO.
-
-	  You should use PIO only if DMA does not work for you.
-
-endchoice