summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-trans.h
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-03-25 03:53:42 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-03-25 03:53:42 -0300
commit03dd4cb26d967f9588437b0fc9cc0e8353322bb7 (patch)
treefa581f6dc1c0596391690d1f67eceef3af8246dc /drivers/net/wireless/iwlwifi/iwl-trans.h
parentd4e493caf788ef44982e131ff9c786546904d934 (diff)
Linux-libre 4.5-gnu
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-trans.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-trans.h1125
1 files changed, 0 insertions, 1125 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
deleted file mode 100644
index 6f7652508..000000000
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ /dev/null
@@ -1,1125 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __iwl_trans_h__
-#define __iwl_trans_h__
-
-#include <linux/ieee80211.h>
-#include <linux/mm.h> /* for page_address */
-#include <linux/lockdep.h>
-
-#include "iwl-debug.h"
-#include "iwl-config.h"
-#include "iwl-fw.h"
-#include "iwl-op-mode.h"
-
-/**
- * DOC: Transport layer - what is it ?
- *
- * The transport layer is the layer that deals with the HW directly. It provides
- * an abstraction of the underlying HW to the upper layer. The transport layer
- * doesn't provide any policy, algorithm or anything of this kind, but only
- * mechanisms to make the HW do something. It is not completely stateless but
- * close to it.
- * We will have an implementation for each different supported bus.
- */
-
-/**
- * DOC: Life cycle of the transport layer
- *
- * The transport layer has a very precise life cycle.
- *
- * 1) A helper function is called during the module initialization and
- * registers the bus driver's ops with the transport's alloc function.
- * 2) Bus's probe calls to the transport layer's allocation functions.
- * Of course this function is bus specific.
- * 3) This allocation functions will spawn the upper layer which will
- * register mac80211.
- *
- * 4) At some point (i.e. mac80211's start call), the op_mode will call
- * the following sequence:
- * start_hw
- * start_fw
- *
- * 5) Then when finished (or reset):
- * stop_device
- *
- * 6) Eventually, the free function will be called.
- */
-
-/**
- * DOC: Host command section
- *
- * A host command is a command issued by the upper layer to the fw. There are
- * several versions of fw that have several APIs. The transport layer is
- * completely agnostic to these differences.
- * The transport does provide helper functionality (i.e. SYNC / ASYNC mode),
- */
-#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
-#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
-#define SEQ_TO_INDEX(s) ((s) & 0xff)
-#define INDEX_TO_SEQ(i) ((i) & 0xff)
-#define SEQ_RX_FRAME cpu_to_le16(0x8000)
-
-/*
- * those functions retrieve specific information from
- * the id field in the iwl_host_cmd struct which contains
- * the command id, the group id and the version of the command
- * and vice versa
-*/
-static inline u8 iwl_cmd_opcode(u32 cmdid)
-{
- return cmdid & 0xFF;
-}
-
-static inline u8 iwl_cmd_groupid(u32 cmdid)
-{
- return ((cmdid & 0xFF00) >> 8);
-}
-
-static inline u8 iwl_cmd_version(u32 cmdid)
-{
- return ((cmdid & 0xFF0000) >> 16);
-}
-
-static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version)
-{
- return opcode + (groupid << 8) + (version << 16);
-}
-
-/* make u16 wide id out of u8 group and opcode */
-#define WIDE_ID(grp, opcode) ((grp << 8) | opcode)
-
-/* due to the conversion, this group is special; new groups
- * should be defined in the appropriate fw-api header files
- */
-#define IWL_ALWAYS_LONG_GROUP 1
-
-/**
- * struct iwl_cmd_header
- *
- * This header format appears in the beginning of each command sent from the
- * driver, and each response/notification received from uCode.
- */
-struct iwl_cmd_header {
- u8 cmd; /* Command ID: REPLY_RXON, etc. */
- u8 group_id;
- /*
- * The driver sets up the sequence number to values of its choosing.
- * uCode does not use this value, but passes it back to the driver
- * when sending the response to each driver-originated command, so
- * the driver can match the response to the command. Since the values
- * don't get used by uCode, the driver may set up an arbitrary format.
- *
- * There is one exception: uCode sets bit 15 when it originates
- * the response/notification, i.e. when the response/notification
- * is not a direct response to a command sent by the driver. For
- * example, uCode issues REPLY_RX when it sends a received frame
- * to the driver; it is not a direct response to any driver command.
- *
- * The Linux driver uses the following format:
- *
- * 0:7 tfd index - position within TX queue
- * 8:12 TX queue id
- * 13:14 reserved
- * 15 unsolicited RX or uCode-originated notification
- */
- __le16 sequence;
-} __packed;
-
-/**
- * struct iwl_cmd_header_wide
- *
- * This header format appears in the beginning of each command sent from the
- * driver, and each response/notification received from uCode.
- * this is the wide version that contains more information about the command
- * like length, version and command type
- */
-struct iwl_cmd_header_wide {
- u8 cmd;
- u8 group_id;
- __le16 sequence;
- __le16 length;
- u8 reserved;
- u8 version;
-} __packed;
-
-#define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */
-#define FH_RSCSR_FRAME_INVALID 0x55550000
-#define FH_RSCSR_FRAME_ALIGN 0x40
-
-struct iwl_rx_packet {
- /*
- * The first 4 bytes of the RX frame header contain both the RX frame
- * size and some flags.
- * Bit fields:
- * 31: flag flush RB request
- * 30: flag ignore TC (terminal counter) request
- * 29: flag fast IRQ request
- * 28-14: Reserved
- * 13-00: RX frame size
- */
- __le32 len_n_flags;
- struct iwl_cmd_header hdr;
- u8 data[];
-} __packed;
-
-static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt)
-{
- return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
-}
-
-static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
-{
- return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr);
-}
-
-/**
- * enum CMD_MODE - how to send the host commands ?
- *
- * @CMD_ASYNC: Return right away and don't wait for the response
- * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of
- * the response. The caller needs to call iwl_free_resp when done.
- * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the
- * command queue, but after other high priority commands. Valid only
- * with CMD_ASYNC.
- * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle.
- * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
- * @CMD_WAKE_UP_TRANS: The command response should wake up the trans
- * (i.e. mark it as non-idle).
- * @CMD_TB_BITMAP_POS: Position of the first bit for the TB bitmap. We need to
- * check that we leave enough room for the TBs bitmap which needs 20 bits.
- */
-enum CMD_MODE {
- CMD_ASYNC = BIT(0),
- CMD_WANT_SKB = BIT(1),
- CMD_SEND_IN_RFKILL = BIT(2),
- CMD_HIGH_PRIO = BIT(3),
- CMD_SEND_IN_IDLE = BIT(4),
- CMD_MAKE_TRANS_IDLE = BIT(5),
- CMD_WAKE_UP_TRANS = BIT(6),
-
- CMD_TB_BITMAP_POS = 11,
-};
-
-#define DEF_CMD_PAYLOAD_SIZE 320
-
-/**
- * struct iwl_device_cmd
- *
- * For allocation of the command and tx queues, this establishes the overall
- * size of the largest command we send to uCode, except for commands that
- * aren't fully copied and use other TFD space.
- */
-struct iwl_device_cmd {
- union {
- struct {
- struct iwl_cmd_header hdr; /* uCode API */
- u8 payload[DEF_CMD_PAYLOAD_SIZE];
- };
- struct {
- struct iwl_cmd_header_wide hdr_wide;
- u8 payload_wide[DEF_CMD_PAYLOAD_SIZE -
- sizeof(struct iwl_cmd_header_wide) +
- sizeof(struct iwl_cmd_header)];
- };
- };
-} __packed;
-
-#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
-
-/*
- * number of transfer buffers (fragments) per transmit frame descriptor;
- * this is just the driver's idea, the hardware supports 20
- */
-#define IWL_MAX_CMD_TBS_PER_TFD 2
-
-/**
- * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
- *
- * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
- * ring. The transport layer doesn't map the command's buffer to DMA, but
- * rather copies it to a previously allocated DMA buffer. This flag tells
- * the transport layer not to copy the command, but to map the existing
- * buffer (that is passed in) instead. This saves the memcpy and allows
- * commands that are bigger than the fixed buffer to be submitted.
- * Note that a TFD entry after a NOCOPY one cannot be a normal copied one.
- * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this
- * chunk internally and free it again after the command completes. This
- * can (currently) be used only once per command.
- * Note that a TFD entry after a DUP one cannot be a normal copied one.
- */
-enum iwl_hcmd_dataflag {
- IWL_HCMD_DFL_NOCOPY = BIT(0),
- IWL_HCMD_DFL_DUP = BIT(1),
-};
-
-/**
- * struct iwl_host_cmd - Host command to the uCode
- *
- * @data: array of chunks that composes the data of the host command
- * @resp_pkt: response packet, if %CMD_WANT_SKB was set
- * @_rx_page_order: (internally used to free response packet)
- * @_rx_page_addr: (internally used to free response packet)
- * @flags: can be CMD_*
- * @len: array of the lengths of the chunks in data
- * @dataflags: IWL_HCMD_DFL_*
- * @id: command id of the host command, for wide commands encoding the
- * version and group as well
- */
-struct iwl_host_cmd {
- const void *data[IWL_MAX_CMD_TBS_PER_TFD];
- struct iwl_rx_packet *resp_pkt;
- unsigned long _rx_page_addr;
- u32 _rx_page_order;
-
- u32 flags;
- u32 id;
- u16 len[IWL_MAX_CMD_TBS_PER_TFD];
- u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
-};
-
-static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
-{
- free_pages(cmd->_rx_page_addr, cmd->_rx_page_order);
-}
-
-struct iwl_rx_cmd_buffer {
- struct page *_page;
- int _offset;
- bool _page_stolen;
- u32 _rx_page_order;
- unsigned int truesize;
-};
-
-static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
-{
- return (void *)((unsigned long)page_address(r->_page) + r->_offset);
-}
-
-static inline int rxb_offset(struct iwl_rx_cmd_buffer *r)
-{
- return r->_offset;
-}
-
-static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
-{
- r->_page_stolen = true;
- get_page(r->_page);
- return r->_page;
-}
-
-static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r)
-{
- __free_pages(r->_page, r->_rx_page_order);
-}
-
-#define MAX_NO_RECLAIM_CMDS 6
-
-#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
-
-/*
- * Maximum number of HW queues the transport layer
- * currently supports
- */
-#define IWL_MAX_HW_QUEUES 32
-#define IWL_MAX_TID_COUNT 8
-#define IWL_FRAME_LIMIT 64
-#define IWL_MAX_RX_HW_QUEUES 16
-
-/**
- * enum iwl_wowlan_status - WoWLAN image/device status
- * @IWL_D3_STATUS_ALIVE: firmware is still running after resume
- * @IWL_D3_STATUS_RESET: device was reset while suspended
- */
-enum iwl_d3_status {
- IWL_D3_STATUS_ALIVE,
- IWL_D3_STATUS_RESET,
-};
-
-/**
- * enum iwl_trans_status: transport status flags
- * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed
- * @STATUS_DEVICE_ENABLED: APM is enabled
- * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
- * @STATUS_INT_ENABLED: interrupts are enabled
- * @STATUS_RFKILL: the HW RFkill switch is in KILL position
- * @STATUS_FW_ERROR: the fw is in error state
- * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands
- * are sent
- * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent
- * @STATUS_TRANS_DEAD: trans is dead - avoid any read/write operation
- */
-enum iwl_trans_status {
- STATUS_SYNC_HCMD_ACTIVE,
- STATUS_DEVICE_ENABLED,
- STATUS_TPOWER_PMI,
- STATUS_INT_ENABLED,
- STATUS_RFKILL,
- STATUS_FW_ERROR,
- STATUS_TRANS_GOING_IDLE,
- STATUS_TRANS_IDLE,
- STATUS_TRANS_DEAD,
-};
-
-/**
- * struct iwl_trans_config - transport configuration
- *
- * @op_mode: pointer to the upper layer.
- * @cmd_queue: the index of the command queue.
- * Must be set before start_fw.
- * @cmd_fifo: the fifo for host commands
- * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue.
- * @no_reclaim_cmds: Some devices erroneously don't set the
- * SEQ_RX_FRAME bit on some notifications, this is the
- * list of such notifications to filter. Max length is
- * %MAX_NO_RECLAIM_CMDS.
- * @n_no_reclaim_cmds: # of commands in list
- * @rx_buf_size_8k: 8 kB RX buffer size needed for A-MSDUs,
- * if unset 4k will be the RX buffer size
- * @bc_table_dword: set to true if the BC table expects the byte count to be
- * in DWORD (as opposed to bytes)
- * @scd_set_active: should the transport configure the SCD for HCMD queue
- * @wide_cmd_header: firmware supports wide host command header
- * @command_names: array of command names, must be 256 entries
- * (one for each command); for debugging only
- * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until
- * we get the ALIVE from the uCode
- */
-struct iwl_trans_config {
- struct iwl_op_mode *op_mode;
-
- u8 cmd_queue;
- u8 cmd_fifo;
- unsigned int cmd_q_wdg_timeout;
- const u8 *no_reclaim_cmds;
- unsigned int n_no_reclaim_cmds;
-
- bool rx_buf_size_8k;
- bool bc_table_dword;
- bool scd_set_active;
- bool wide_cmd_header;
- const char *const *command_names;
-
- u32 sdio_adma_addr;
-};
-
-struct iwl_trans_dump_data {
- u32 len;
- u8 data[];
-};
-
-struct iwl_trans;
-
-struct iwl_trans_txq_scd_cfg {
- u8 fifo;
- s8 sta_id;
- u8 tid;
- bool aggregate;
- int frame_limit;
-};
-
-/**
- * struct iwl_trans_ops - transport specific operations
- *
- * All the handlers MUST be implemented
- *
- * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken
- * out of a low power state. From that point on, the HW can send
- * interrupts. May sleep.
- * @op_mode_leave: Turn off the HW RF kill indication if on
- * May sleep
- * @start_fw: allocates and inits all the resources for the transport
- * layer. Also kick a fw image.
- * May sleep
- * @fw_alive: called when the fw sends alive notification. If the fw provides
- * the SCD base address in SRAM, then provide it here, or 0 otherwise.
- * May sleep
- * @stop_device: stops the whole device (embedded CPU put to reset) and stops
- * the HW. If low_power is true, the NIC will be put in low power state.
- * From that point on, the HW will be stopped but will still issue an
- * interrupt if the HW RF kill switch is triggered.
- * This callback must do the right thing and not crash even if %start_hw()
- * was called but not &start_fw(). May sleep.
- * @d3_suspend: put the device into the correct mode for WoWLAN during
- * suspend. This is optional, if not implemented WoWLAN will not be
- * supported. This callback may sleep.
- * @d3_resume: resume the device after WoWLAN, enabling the opmode to
- * talk to the WoWLAN image to get its status. This is optional, if not
- * implemented WoWLAN will not be supported. This callback may sleep.
- * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
- * If RFkill is asserted in the middle of a SYNC host command, it must
- * return -ERFKILL straight away.
- * May sleep only if CMD_ASYNC is not set
- * @tx: send an skb
- * Must be atomic
- * @reclaim: free packet until ssn. Returns a list of freed packets.
- * Must be atomic
- * @txq_enable: setup a queue. To setup an AC queue, use the
- * iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
- * this one. The op_mode must not configure the HCMD queue. The scheduler
- * configuration may be %NULL, in which case the hardware will not be
- * configured. May sleep.
- * @txq_disable: de-configure a Tx queue to send AMPDUs
- * Must be atomic
- * @wait_tx_queue_empty: wait until tx queues are empty. May sleep.
- * @freeze_txq_timer: prevents the timer of the queue from firing until the
- * queue is set to awake. Must be atomic.
- * @dbgfs_register: add the dbgfs files under this directory. Files will be
- * automatically deleted.
- * @write8: write a u8 to a register at offset ofs from the BAR
- * @write32: write a u32 to a register at offset ofs from the BAR
- * @read32: read a u32 register at offset ofs from the BAR
- * @read_prph: read a DWORD from a periphery register
- * @write_prph: write a DWORD to a periphery register
- * @read_mem: read device's SRAM in DWORD
- * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
- * will be zeroed.
- * @configure: configure parameters required by the transport layer from
- * the op_mode. May be called several times before start_fw, can't be
- * called after that.
- * @set_pmi: set the power pmi state
- * @grab_nic_access: wake the NIC to be able to access non-HBUS regs.
- * Sleeping is not allowed between grab_nic_access and
- * release_nic_access.
- * @release_nic_access: let the NIC go to sleep. The "flags" parameter
- * must be the same one that was sent before to the grab_nic_access.
- * @set_bits_mask - set SRAM register according to value and mask.
- * @ref: grab a reference to the transport/FW layers, disallowing
- * certain low power states
- * @unref: release a reference previously taken with @ref. Note that
- * initially the reference count is 1, making an initial @unref
- * necessary to allow low power states.
- * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last
- * TX'ed commands and similar. The buffer will be vfree'd by the caller.
- * Note that the transport must fill in the proper file headers.
- */
-struct iwl_trans_ops {
-
- int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power);
- void (*op_mode_leave)(struct iwl_trans *iwl_trans);
- int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
- bool run_in_rfkill);
- int (*update_sf)(struct iwl_trans *trans,
- struct iwl_sf_region *st_fwrd_space);
- void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
- void (*stop_device)(struct iwl_trans *trans, bool low_power);
-
- void (*d3_suspend)(struct iwl_trans *trans, bool test);
- int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status,
- bool test);
-
- int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
-
- int (*tx)(struct iwl_trans *trans, struct sk_buff *skb,
- struct iwl_device_cmd *dev_cmd, int queue);
- void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
- struct sk_buff_head *skbs);
-
- void (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn,
- const struct iwl_trans_txq_scd_cfg *cfg,
- unsigned int queue_wdg_timeout);
- void (*txq_disable)(struct iwl_trans *trans, int queue,
- bool configure_scd);
-
- int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir);
- int (*wait_tx_queue_empty)(struct iwl_trans *trans, u32 txq_bm);
- void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs,
- bool freeze);
-
- void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
- void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
- u32 (*read32)(struct iwl_trans *trans, u32 ofs);
- u32 (*read_prph)(struct iwl_trans *trans, u32 ofs);
- void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val);
- int (*read_mem)(struct iwl_trans *trans, u32 addr,
- void *buf, int dwords);
- int (*write_mem)(struct iwl_trans *trans, u32 addr,
- const void *buf, int dwords);
- void (*configure)(struct iwl_trans *trans,
- const struct iwl_trans_config *trans_cfg);
- void (*set_pmi)(struct iwl_trans *trans, bool state);
- bool (*grab_nic_access)(struct iwl_trans *trans, bool silent,
- unsigned long *flags);
- void (*release_nic_access)(struct iwl_trans *trans,
- unsigned long *flags);
- void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
- u32 value);
- void (*ref)(struct iwl_trans *trans);
- void (*unref)(struct iwl_trans *trans);
- int (*suspend)(struct iwl_trans *trans);
- void (*resume)(struct iwl_trans *trans);
-
- struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans,
- struct iwl_fw_dbg_trigger_tlv
- *trigger);
-};
-
-/**
- * enum iwl_trans_state - state of the transport layer
- *
- * @IWL_TRANS_NO_FW: no fw has sent an alive response
- * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
- */
-enum iwl_trans_state {
- IWL_TRANS_NO_FW = 0,
- IWL_TRANS_FW_ALIVE = 1,
-};
-
-/**
- * enum iwl_d0i3_mode - d0i3 mode
- *
- * @IWL_D0I3_MODE_OFF - d0i3 is disabled
- * @IWL_D0I3_MODE_ON_IDLE - enter d0i3 when device is idle
- * (e.g. no active references)
- * @IWL_D0I3_MODE_ON_SUSPEND - enter d0i3 only on suspend
- * (in case of 'any' trigger)
- */
-enum iwl_d0i3_mode {
- IWL_D0I3_MODE_OFF = 0,
- IWL_D0I3_MODE_ON_IDLE,
- IWL_D0I3_MODE_ON_SUSPEND,
-};
-
-/**
- * struct iwl_trans - transport common data
- *
- * @ops - pointer to iwl_trans_ops
- * @op_mode - pointer to the op_mode
- * @cfg - pointer to the configuration
- * @status: a bit-mask of transport status flags
- * @dev - pointer to struct device * that represents the device
- * @max_skb_frags: maximum number of fragments an SKB can have when transmitted.
- * 0 indicates that frag SKBs (NETIF_F_SG) aren't supported.
- * @hw_id: a u32 with the ID of the device / sub-device.
- * Set during transport allocation.
- * @hw_id_str: a string with info about HW ID. Set during transport allocation.
- * @pm_support: set to true in start_hw if link pm is supported
- * @ltr_enabled: set to true if the LTR is enabled
- * @num_rx_queues: number of RX queues allocated by the transport;
- * the transport must set this before calling iwl_drv_start()
- * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
- * The user should use iwl_trans_{alloc,free}_tx_cmd.
- * @dev_cmd_headroom: room needed for the transport's private use before the
- * device_cmd for Tx - for internal use only
- * The user should use iwl_trans_{alloc,free}_tx_cmd.
- * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before
- * starting the firmware, used for tracing
- * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
- * start of the 802.11 header in the @rx_mpdu_cmd
- * @dflt_pwr_limit: default power limit fetched from the platform (ACPI)
- * @dbg_dest_tlv: points to the destination TLV for debug
- * @dbg_conf_tlv: array of pointers to configuration TLVs for debug
- * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug
- * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv
- * @paging_req_addr: The location were the FW will upload / download the pages
- * from. The address is set by the opmode
- * @paging_db: Pointer to the opmode paging data base, the pointer is set by
- * the opmode.
- * @paging_download_buf: Buffer used for copying all of the pages before
- * downloading them to the FW. The buffer is allocated in the opmode
- */
-struct iwl_trans {
- const struct iwl_trans_ops *ops;
- struct iwl_op_mode *op_mode;
- const struct iwl_cfg *cfg;
- enum iwl_trans_state state;
- unsigned long status;
-
- struct device *dev;
- u32 max_skb_frags;
- u32 hw_rev;
- u32 hw_id;
- char hw_id_str[52];
-
- u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
-
- bool pm_support;
- bool ltr_enabled;
-
- u8 num_rx_queues;
-
- /* The following fields are internal only */
- struct kmem_cache *dev_cmd_pool;
- size_t dev_cmd_headroom;
- char dev_cmd_pool_name[50];
-
- struct dentry *dbgfs_dir;
-
-#ifdef CONFIG_LOCKDEP
- struct lockdep_map sync_cmd_lockdep_map;
-#endif
-
- u64 dflt_pwr_limit;
-
- const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv;
- const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX];
- struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv;
- u8 dbg_dest_reg_num;
-
- /*
- * Paging parameters - All of the parameters should be set by the
- * opmode when paging is enabled
- */
- u32 paging_req_addr;
- struct iwl_fw_paging *paging_db;
- void *paging_download_buf;
-
- enum iwl_d0i3_mode d0i3_mode;
-
- bool wowlan_d0i3;
-
- /* pointer to trans specific struct */
- /*Ensure that this pointer will always be aligned to sizeof pointer */
- char trans_specific[0] __aligned(sizeof(void *));
-};
-
-static inline void iwl_trans_configure(struct iwl_trans *trans,
- const struct iwl_trans_config *trans_cfg)
-{
- trans->op_mode = trans_cfg->op_mode;
-
- trans->ops->configure(trans, trans_cfg);
-}
-
-static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power)
-{
- might_sleep();
-
- return trans->ops->start_hw(trans, low_power);
-}
-
-static inline int iwl_trans_start_hw(struct iwl_trans *trans)
-{
- return trans->ops->start_hw(trans, true);
-}
-
-static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
-{
- might_sleep();
-
- if (trans->ops->op_mode_leave)
- trans->ops->op_mode_leave(trans);
-
- trans->op_mode = NULL;
-
- trans->state = IWL_TRANS_NO_FW;
-}
-
-static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr)
-{
- might_sleep();
-
- trans->state = IWL_TRANS_FW_ALIVE;
-
- trans->ops->fw_alive(trans, scd_addr);
-}
-
-static inline int iwl_trans_start_fw(struct iwl_trans *trans,
- const struct fw_img *fw,
- bool run_in_rfkill)
-{
- might_sleep();
-
- WARN_ON_ONCE(!trans->rx_mpdu_cmd);
-
- clear_bit(STATUS_FW_ERROR, &trans->status);
- return trans->ops->start_fw(trans, fw, run_in_rfkill);
-}
-
-static inline int iwl_trans_update_sf(struct iwl_trans *trans,
- struct iwl_sf_region *st_fwrd_space)
-{
- might_sleep();
-
- if (trans->ops->update_sf)
- return trans->ops->update_sf(trans, st_fwrd_space);
-
- return 0;
-}
-
-static inline void _iwl_trans_stop_device(struct iwl_trans *trans,
- bool low_power)
-{
- might_sleep();
-
- trans->ops->stop_device(trans, low_power);
-
- trans->state = IWL_TRANS_NO_FW;
-}
-
-static inline void iwl_trans_stop_device(struct iwl_trans *trans)
-{
- _iwl_trans_stop_device(trans, true);
-}
-
-static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test)
-{
- might_sleep();
- if (trans->ops->d3_suspend)
- trans->ops->d3_suspend(trans, test);
-}
-
-static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
- enum iwl_d3_status *status,
- bool test)
-{
- might_sleep();
- if (!trans->ops->d3_resume)
- return 0;
-
- return trans->ops->d3_resume(trans, status, test);
-}
-
-static inline void iwl_trans_ref(struct iwl_trans *trans)
-{
- if (trans->ops->ref)
- trans->ops->ref(trans);
-}
-
-static inline void iwl_trans_unref(struct iwl_trans *trans)
-{
- if (trans->ops->unref)
- trans->ops->unref(trans);
-}
-
-static inline int iwl_trans_suspend(struct iwl_trans *trans)
-{
- if (!trans->ops->suspend)
- return 0;
-
- return trans->ops->suspend(trans);
-}
-
-static inline void iwl_trans_resume(struct iwl_trans *trans)
-{
- if (trans->ops->resume)
- trans->ops->resume(trans);
-}
-
-static inline struct iwl_trans_dump_data *
-iwl_trans_dump_data(struct iwl_trans *trans,
- struct iwl_fw_dbg_trigger_tlv *trigger)
-{
- if (!trans->ops->dump_data)
- return NULL;
- return trans->ops->dump_data(trans, trigger);
-}
-
-static inline int iwl_trans_send_cmd(struct iwl_trans *trans,
- struct iwl_host_cmd *cmd)
-{
- int ret;
-
- if (unlikely(!(cmd->flags & CMD_SEND_IN_RFKILL) &&
- test_bit(STATUS_RFKILL, &trans->status)))
- return -ERFKILL;
-
- if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
- return -EIO;
-
- if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) {
- IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
- return -EIO;
- }
-
- if (!(cmd->flags & CMD_ASYNC))
- lock_map_acquire_read(&trans->sync_cmd_lockdep_map);
-
- ret = trans->ops->send_cmd(trans, cmd);
-
- if (!(cmd->flags & CMD_ASYNC))
- lock_map_release(&trans->sync_cmd_lockdep_map);
-
- return ret;
-}
-
-static inline struct iwl_device_cmd *
-iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
-{
- u8 *dev_cmd_ptr = kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC);
-
- if (unlikely(dev_cmd_ptr == NULL))
- return NULL;
-
- return (struct iwl_device_cmd *)
- (dev_cmd_ptr + trans->dev_cmd_headroom);
-}
-
-static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
- struct iwl_device_cmd *dev_cmd)
-{
- u8 *dev_cmd_ptr = (u8 *)dev_cmd - trans->dev_cmd_headroom;
-
- kmem_cache_free(trans->dev_cmd_pool, dev_cmd_ptr);
-}
-
-static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
- struct iwl_device_cmd *dev_cmd, int queue)
-{
- if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
- return -EIO;
-
- if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
- IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
-
- return trans->ops->tx(trans, skb, dev_cmd, queue);
-}
-
-static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
- int ssn, struct sk_buff_head *skbs)
-{
- if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
- IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
-
- trans->ops->reclaim(trans, queue, ssn, skbs);
-}
-
-static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue,
- bool configure_scd)
-{
- trans->ops->txq_disable(trans, queue, configure_scd);
-}
-
-static inline void
-iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn,
- const struct iwl_trans_txq_scd_cfg *cfg,
- unsigned int queue_wdg_timeout)
-{
- might_sleep();
-
- if (unlikely((trans->state != IWL_TRANS_FW_ALIVE)))
- IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
-
- trans->ops->txq_enable(trans, queue, ssn, cfg, queue_wdg_timeout);
-}
-
-static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
- int fifo, int sta_id, int tid,
- int frame_limit, u16 ssn,
- unsigned int queue_wdg_timeout)
-{
- struct iwl_trans_txq_scd_cfg cfg = {
- .fifo = fifo,
- .sta_id = sta_id,
- .tid = tid,
- .frame_limit = frame_limit,
- .aggregate = sta_id >= 0,
- };
-
- iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout);
-}
-
-static inline
-void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo,
- unsigned int queue_wdg_timeout)
-{
- struct iwl_trans_txq_scd_cfg cfg = {
- .fifo = fifo,
- .sta_id = -1,
- .tid = IWL_MAX_TID_COUNT,
- .frame_limit = IWL_FRAME_LIMIT,
- .aggregate = false,
- };
-
- iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout);
-}
-
-static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans,
- unsigned long txqs,
- bool freeze)
-{
- if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
- IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
-
- if (trans->ops->freeze_txq_timer)
- trans->ops->freeze_txq_timer(trans, txqs, freeze);
-}
-
-static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans,
- u32 txqs)
-{
- if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
- IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
-
- return trans->ops->wait_tx_queue_empty(trans, txqs);
-}
-
-static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans,
- struct dentry *dir)
-{
- return trans->ops->dbgfs_register(trans, dir);
-}
-
-static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val)
-{
- trans->ops->write8(trans, ofs, val);
-}
-
-static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val)
-{
- trans->ops->write32(trans, ofs, val);
-}
-
-static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs)
-{
- return trans->ops->read32(trans, ofs);
-}
-
-static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs)
-{
- return trans->ops->read_prph(trans, ofs);
-}
-
-static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs,
- u32 val)
-{
- return trans->ops->write_prph(trans, ofs, val);
-}
-
-static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr,
- void *buf, int dwords)
-{
- return trans->ops->read_mem(trans, addr, buf, dwords);
-}
-
-#define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize) \
- do { \
- if (__builtin_constant_p(bufsize)) \
- BUILD_BUG_ON((bufsize) % sizeof(u32)); \
- iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\
- } while (0)
-
-static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr)
-{
- u32 value;
-
- if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1)))
- return 0xa5a5a5a5;
-
- return value;
-}
-
-static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr,
- const void *buf, int dwords)
-{
- return trans->ops->write_mem(trans, addr, buf, dwords);
-}
-
-static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
- u32 val)
-{
- return iwl_trans_write_mem(trans, addr, &val, 1);
-}
-
-static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
-{
- if (trans->ops->set_pmi)
- trans->ops->set_pmi(trans, state);
-}
-
-static inline void
-iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
-{
- trans->ops->set_bits_mask(trans, reg, mask, value);
-}
-
-#define iwl_trans_grab_nic_access(trans, silent, flags) \
- __cond_lock(nic_access, \
- likely((trans)->ops->grab_nic_access(trans, silent, flags)))
-
-static inline void __releases(nic_access)
-iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags)
-{
- trans->ops->release_nic_access(trans, flags);
- __release(nic_access);
-}
-
-static inline void iwl_trans_fw_error(struct iwl_trans *trans)
-{
- if (WARN_ON_ONCE(!trans->op_mode))
- return;
-
- /* prevent double restarts due to the same erroneous FW */
- if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
- iwl_op_mode_nic_error(trans->op_mode);
-}
-
-/*****************************************************
- * transport helper functions
- *****************************************************/
-struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
- struct device *dev,
- const struct iwl_cfg *cfg,
- const struct iwl_trans_ops *ops,
- size_t dev_cmd_headroom);
-void iwl_trans_free(struct iwl_trans *trans);
-
-/*****************************************************
-* driver (transport) register/unregister functions
-******************************************************/
-int __must_check iwl_pci_register_driver(void);
-void iwl_pci_unregister_driver(void);
-
-#endif /* __iwl_trans_h__ */