Linux-libre 4.4-gnupck-4.4-gnu

13 files changed, 0 insertions, 4188 deletions

diff --git a/drivers/net/wireless/rtl818x/rtl8180/Makefile b/drivers/net/wireless/rtl818x/rtl8180/Makefile
deleted file mode 100644
index 21005bd8b..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-rtl818x_pci-objs	:= dev.o rtl8225.o sa2400.o max2820.o grf5101.o rtl8225se.o
-
-obj-$(CONFIG_RTL8180)	+= rtl818x_pci.o
-
-ccflags-y += -Idrivers/net/wireless/rtl818x
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
deleted file mode 100644
index a43a16fde..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ /dev/null
@@ -1,1991 +0,0 @@
-
-/* Linux device driver for RTL8180 / RTL8185 / RTL8187SE
- *
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007,2014 Andrea Merello <andrea.merello@gmail.com>
- *
- * Based on the r8180 driver, which is:
- * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
- *
- * Thanks to Realtek for their support!
- *
- ************************************************************************
- *
- * The driver was extended to the RTL8187SE in 2014 by
- * Andrea Merello <andrea.merello@gmail.com>
- *
- * based also on:
- *  - portions of rtl8187se Linux staging driver, Copyright Realtek corp.
- *    (available in drivers/staging/rtl8187se directory of Linux 3.14)
- *  - other GPL, unpublished (until now), Linux driver code,
- *    Copyright Larry Finger <Larry.Finger@lwfinger.net>
- *
- * A huge thanks goes to Sara V. Nari who forgives me when I'm
- * sitting in front of my laptop at evening, week-end, night...
- *
- * A special thanks goes to Antonio Cuni, who helped me with
- * some python userspace stuff I used to debug RTL8187SE code, and who
- * bought a laptop with an unsupported Wi-Fi card some years ago...
- *
- * Thanks to Larry Finger for writing some code for rtl8187se and for
- * his suggestions.
- *
- * Thanks to Dan Carpenter for reviewing my initial patch and for his
- * suggestions.
- *
- * Thanks to Bernhard Schiffner for his help in testing and for his
- * suggestions.
- *
- ************************************************************************
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/eeprom_93cx6.h>
-#include <linux/module.h>
-#include <net/mac80211.h>
-
-#include "rtl8180.h"
-#include "rtl8225.h"
-#include "sa2400.h"
-#include "max2820.h"
-#include "grf5101.h"
-#include "rtl8225se.h"
-
-MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
-MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
-MODULE_DESCRIPTION("RTL8180 / RTL8185 / RTL8187SE PCI wireless driver");
-MODULE_LICENSE("GPL");
-
-static const struct pci_device_id rtl8180_table[] = {
-
-	/* rtl8187se */
-	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8199) },
-
-	/* rtl8185 */
-	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
-
-	/* rtl8180 */
-	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
-	{ PCI_DEVICE(0x1799, 0x6001) },
-	{ PCI_DEVICE(0x1799, 0x6020) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
-	{ PCI_DEVICE(0x1186, 0x3301) },
-	{ PCI_DEVICE(0x1432, 0x7106) },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, rtl8180_table);
-
-static const struct ieee80211_rate rtl818x_rates[] = {
-	{ .bitrate = 10, .hw_value = 0, },
-	{ .bitrate = 20, .hw_value = 1, },
-	{ .bitrate = 55, .hw_value = 2, },
-	{ .bitrate = 110, .hw_value = 3, },
-	{ .bitrate = 60, .hw_value = 4, },
-	{ .bitrate = 90, .hw_value = 5, },
-	{ .bitrate = 120, .hw_value = 6, },
-	{ .bitrate = 180, .hw_value = 7, },
-	{ .bitrate = 240, .hw_value = 8, },
-	{ .bitrate = 360, .hw_value = 9, },
-	{ .bitrate = 480, .hw_value = 10, },
-	{ .bitrate = 540, .hw_value = 11, },
-};
-
-static const struct ieee80211_channel rtl818x_channels[] = {
-	{ .center_freq = 2412 },
-	{ .center_freq = 2417 },
-	{ .center_freq = 2422 },
-	{ .center_freq = 2427 },
-	{ .center_freq = 2432 },
-	{ .center_freq = 2437 },
-	{ .center_freq = 2442 },
-	{ .center_freq = 2447 },
-	{ .center_freq = 2452 },
-	{ .center_freq = 2457 },
-	{ .center_freq = 2462 },
-	{ .center_freq = 2467 },
-	{ .center_freq = 2472 },
-	{ .center_freq = 2484 },
-};
-
-/* Queues for rtl8187se card
- *
- * name | reg  |  queue
- *  BC  |  7   |   6
- *  MG  |  1   |   0
- *  HI  |  6   |   1
- *  VO  |  5   |   2
- *  VI  |  4   |   3
- *  BE  |  3   |   4
- *  BK  |  2   |   5
- *
- * The complete map for DMA kick reg using use all queue is:
- * static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] =
- *	{1, 6, 5, 4, 3, 2, 7};
- *
- * .. but.. Because for mac80211 4 queues are enough for QoS we use this
- *
- * name | reg  |  queue
- *  BC  |  7   |   4  <- currently not used yet
- *  MG  |  1   |   x  <- Not used
- *  HI  |  6   |   x  <- Not used
- *  VO  |  5   |   0  <- used
- *  VI  |  4   |   1  <- used
- *  BE  |  3   |   2  <- used
- *  BK  |  2   |   3  <- used
- *
- * Beacon queue could be used, but this is not finished yet.
- *
- * I thougth about using the other two queues but I decided not to do this:
- *
- * - I'm unsure whether the mac80211 will ever try to use more than 4 queues
- *   by itself.
- *
- * - I could route MGMT frames (currently sent over VO queue) to the MGMT
- *   queue but since mac80211 will do not know about it, I will probably gain
- *   some HW priority whenever the VO queue is not empty, but this gain is
- *   limited by the fact that I had to stop the mac80211 queue whenever one of
- *   the VO or MGMT queues is full, stopping also submitting of MGMT frame
- *   to the driver.
- *
- * - I don't know how to set in the HW the contention window params for MGMT
- *   and HI-prio queues.
- */
-
-static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = {5, 4, 3, 2, 7};
-
-/* Queues for rtl8180/rtl8185 cards
- *
- * name | reg  |  prio
- *  BC  |  7   |   3
- *  HI  |  6   |   0
- *  NO  |  5   |   1
- *  LO  |  4   |   2
- *
- * The complete map for DMA kick reg using all queue is:
- * static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {6, 5, 4, 7};
- *
- * .. but .. Because the mac80211 needs at least 4 queues for QoS or
- * otherwise QoS can't be done, we use just one.
- * Beacon queue could be used, but this is not finished yet.
- * Actual map is:
- *
- * name | reg  |  prio
- *  BC  |  7   |   1  <- currently not used yet.
- *  HI  |  6   |   x  <- not used
- *  NO  |  5   |   x  <- not used
- *  LO  |  4   |   0  <- used
- */
-
-static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {4, 7};
-
-/* LNA gain table for rtl8187se */
-static const u8 rtl8187se_lna_gain[4] = {02, 17, 29, 39};
-
-void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i = 10;
-	u32 buf;
-
-	buf = (data << 8) | addr;
-
-	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
-	while (i--) {
-		rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
-		if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
-			return;
-	}
-}
-
-static void rtl8180_handle_rx(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl818x_rx_cmd_desc *cmd_desc;
-	unsigned int count = 32;
-	u8 agc, sq;
-	s8 signal = 1;
-	dma_addr_t mapping;
-
-	while (count--) {
-		void *entry = priv->rx_ring + priv->rx_idx * priv->rx_ring_sz;
-		struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
-		u32 flags, flags2, flags3 = 0;
-		u64 tsft;
-
-		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-			struct rtl8187se_rx_desc *desc = entry;
-
-			flags = le32_to_cpu(desc->flags);
-			/* if ownership flag is set, then we can trust the
-			 * HW has written other fields. We must not trust
-			 * other descriptor data read before we checked (read)
-			 * the ownership flag
-			 */
-			rmb();
-			flags3 = le32_to_cpu(desc->flags3);
-			flags2 = le32_to_cpu(desc->flags2);
-			tsft = le64_to_cpu(desc->tsft);
-		} else {
-			struct rtl8180_rx_desc *desc = entry;
-
-			flags = le32_to_cpu(desc->flags);
-			/* same as above */
-			rmb();
-			flags2 = le32_to_cpu(desc->flags2);
-			tsft = le64_to_cpu(desc->tsft);
-		}
-
-		if (flags & RTL818X_RX_DESC_FLAG_OWN)
-			return;
-
-		if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL |
-				      RTL818X_RX_DESC_FLAG_FOF |
-				      RTL818X_RX_DESC_FLAG_RX_ERR)))
-			goto done;
-		else {
-			struct ieee80211_rx_status rx_status = {0};
-			struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
-
-			if (unlikely(!new_skb))
-				goto done;
-
-			mapping = pci_map_single(priv->pdev,
-					       skb_tail_pointer(new_skb),
-					       MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
-
-			if (pci_dma_mapping_error(priv->pdev, mapping)) {
-				kfree_skb(new_skb);
-				dev_err(&priv->pdev->dev, "RX DMA map error\n");
-
-				goto done;
-			}
-
-			pci_unmap_single(priv->pdev,
-					 *((dma_addr_t *)skb->cb),
-					 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
-			skb_put(skb, flags & 0xFFF);
-
-			rx_status.antenna = (flags2 >> 15) & 1;
-			rx_status.rate_idx = (flags >> 20) & 0xF;
-			agc = (flags2 >> 17) & 0x7F;
-
-			switch (priv->chip_family) {
-			case RTL818X_CHIP_FAMILY_RTL8185:
-				if (rx_status.rate_idx > 3)
-					signal = -clamp_t(u8, agc, 25, 90) - 9;
-				else
-					signal = -clamp_t(u8, agc, 30, 95);
-				break;
-			case RTL818X_CHIP_FAMILY_RTL8180:
-				sq = flags2 & 0xff;
-				signal = priv->rf->calc_rssi(agc, sq);
-				break;
-			case RTL818X_CHIP_FAMILY_RTL8187SE:
-				/* OFDM measure reported by HW is signed,
-				 * in 0.5dBm unit, with zero centered @ -41dBm
-				 * input signal.
-				 */
-				if (rx_status.rate_idx > 3) {
-					signal = (s8)((flags3 >> 16) & 0xff);
-					signal = signal / 2 - 41;
-				} else {
-					int idx, bb;
-
-					idx = (agc & 0x60) >> 5;
-					bb = (agc & 0x1F) * 2;
-					/* bias + BB gain + LNA gain */
-					signal = 4 - bb - rtl8187se_lna_gain[idx];
-				}
-				break;
-			}
-			rx_status.signal = signal;
-			rx_status.freq = dev->conf.chandef.chan->center_freq;
-			rx_status.band = dev->conf.chandef.chan->band;
-			rx_status.mactime = tsft;
-			rx_status.flag |= RX_FLAG_MACTIME_START;
-			if (flags & RTL818X_RX_DESC_FLAG_SPLCP)
-				rx_status.flag |= RX_FLAG_SHORTPRE;
-			if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
-				rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
-
-			memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
-			ieee80211_rx_irqsafe(dev, skb);
-
-			skb = new_skb;
-			priv->rx_buf[priv->rx_idx] = skb;
-			*((dma_addr_t *) skb->cb) = mapping;
-		}
-
-	done:
-		cmd_desc = entry;
-		cmd_desc->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
-		cmd_desc->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
-					   MAX_RX_SIZE);
-		if (priv->rx_idx == 31)
-			cmd_desc->flags |=
-				cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
-		priv->rx_idx = (priv->rx_idx + 1) % 32;
-	}
-}
-
-static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
-
-	while (skb_queue_len(&ring->queue)) {
-		struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
-		struct sk_buff *skb;
-		struct ieee80211_tx_info *info;
-		u32 flags = le32_to_cpu(entry->flags);
-
-		if (flags & RTL818X_TX_DESC_FLAG_OWN)
-			return;
-
-		ring->idx = (ring->idx + 1) % ring->entries;
-		skb = __skb_dequeue(&ring->queue);
-		pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
-				 skb->len, PCI_DMA_TODEVICE);
-
-		info = IEEE80211_SKB_CB(skb);
-		ieee80211_tx_info_clear_status(info);
-
-		if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
-		    (flags & RTL818X_TX_DESC_FLAG_TX_OK))
-			info->flags |= IEEE80211_TX_STAT_ACK;
-
-		info->status.rates[0].count = (flags & 0xFF) + 1;
-
-		ieee80211_tx_status_irqsafe(dev, skb);
-		if (ring->entries - skb_queue_len(&ring->queue) == 2)
-			ieee80211_wake_queue(dev, prio);
-	}
-}
-
-static irqreturn_t rtl8187se_interrupt(int irq, void *dev_id)
-{
-	struct ieee80211_hw *dev = dev_id;
-	struct rtl8180_priv *priv = dev->priv;
-	u32 reg;
-	unsigned long flags;
-	static int desc_err;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	/* Note: 32-bit interrupt status */
-	reg = rtl818x_ioread32(priv, &priv->map->INT_STATUS_SE);
-	if (unlikely(reg == 0xFFFFFFFF)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return IRQ_HANDLED;
-	}
-
-	rtl818x_iowrite32(priv, &priv->map->INT_STATUS_SE, reg);
-
-	if (reg & IMR_TIMEOUT1)
-		rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
-
-	if (reg & (IMR_TBDOK | IMR_TBDER))
-		rtl8180_handle_tx(dev, 4);
-
-	if (reg & (IMR_TVODOK | IMR_TVODER))
-		rtl8180_handle_tx(dev, 0);
-
-	if (reg & (IMR_TVIDOK | IMR_TVIDER))
-		rtl8180_handle_tx(dev, 1);
-
-	if (reg & (IMR_TBEDOK | IMR_TBEDER))
-		rtl8180_handle_tx(dev, 2);
-
-	if (reg & (IMR_TBKDOK | IMR_TBKDER))
-		rtl8180_handle_tx(dev, 3);
-
-	if (reg & (IMR_ROK | IMR_RER | RTL818X_INT_SE_RX_DU | IMR_RQOSOK))
-		rtl8180_handle_rx(dev);
-	/* The interface sometimes generates several RX DMA descriptor errors
-	 * at startup. Do not report these.
-	 */
-	if ((reg & RTL818X_INT_SE_RX_DU) && desc_err++ > 2)
-		if (net_ratelimit())
-			wiphy_err(dev->wiphy, "No RX DMA Descriptor avail\n");
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
-{
-	struct ieee80211_hw *dev = dev_id;
-	struct rtl8180_priv *priv = dev->priv;
-	u16 reg;
-
-	spin_lock(&priv->lock);
-	reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
-	if (unlikely(reg == 0xFFFF)) {
-		spin_unlock(&priv->lock);
-		return IRQ_HANDLED;
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
-
-	if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
-		rtl8180_handle_tx(dev, 1);
-
-	if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
-		rtl8180_handle_tx(dev, 0);
-
-	if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
-		rtl8180_handle_rx(dev);
-
-	spin_unlock(&priv->lock);
-
-	return IRQ_HANDLED;
-}
-
-static void rtl8180_tx(struct ieee80211_hw *dev,
-		       struct ieee80211_tx_control *control,
-		       struct sk_buff *skb)
-{
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_tx_ring *ring;
-	struct rtl8180_tx_desc *entry;
-	unsigned long flags;
-	unsigned int idx, prio, hw_prio;
-	dma_addr_t mapping;
-	u32 tx_flags;
-	u8 rc_flags;
-	u16 plcp_len = 0;
-	__le16 rts_duration = 0;
-	/* do arithmetic and then convert to le16 */
-	u16 frame_duration = 0;
-
-	prio = skb_get_queue_mapping(skb);
-	ring = &priv->tx_ring[prio];
-
-	mapping = pci_map_single(priv->pdev, skb->data,
-				 skb->len, PCI_DMA_TODEVICE);
-
-	if (pci_dma_mapping_error(priv->pdev, mapping)) {
-		kfree_skb(skb);
-		dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
-		return;
-	}
-
-	tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
-		   RTL818X_TX_DESC_FLAG_LS |
-		   (ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
-		   skb->len;
-
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
-		tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
-			    RTL818X_TX_DESC_FLAG_NO_ENC;
-
-	rc_flags = info->control.rates[0].flags;
-
-	/* HW will perform RTS-CTS when only RTS flags is set.
-	 * HW will perform CTS-to-self when both RTS and CTS flags are set.
-	 * RTS rate and RTS duration will be used also for CTS-to-self.
-	 */
-	if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
-		tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
-		rts_duration = ieee80211_rts_duration(dev, priv->vif,
-						skb->len, info);
-	} else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		tx_flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS;
-		tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
-		rts_duration = ieee80211_ctstoself_duration(dev, priv->vif,
-						skb->len, info);
-	}
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
-		unsigned int remainder;
-
-		plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
-				(ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
-		remainder = (16 * (skb->len + 4)) %
-			    ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
-		if (remainder <= 6)
-			plcp_len |= 1 << 15;
-	}
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-		__le16 duration;
-		/* SIFS time (required by HW) is already included by
-		 * ieee80211_generic_frame_duration
-		 */
-		duration = ieee80211_generic_frame_duration(dev, priv->vif,
-					IEEE80211_BAND_2GHZ, skb->len,
-					ieee80211_get_tx_rate(dev, info));
-
-		frame_duration =  priv->ack_time + le16_to_cpu(duration);
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
-			priv->seqno += 0x10;
-		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-		hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
-	}
-
-	idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
-	entry = &ring->desc[idx];
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-		entry->frame_duration = cpu_to_le16(frame_duration);
-		entry->frame_len_se = cpu_to_le16(skb->len);
-
-		/* tpc polarity */
-		entry->flags3 = cpu_to_le16(1<<4);
-	} else
-		entry->frame_len = cpu_to_le32(skb->len);
-
-	entry->rts_duration = rts_duration;
-	entry->plcp_len = cpu_to_le16(plcp_len);
-	entry->tx_buf = cpu_to_le32(mapping);
-
-	entry->retry_limit = info->control.rates[0].count - 1;
-
-	/* We must be sure that tx_flags is written last because the HW
-	 * looks at it to check if the rest of data is valid or not
-	 */
-	wmb();
-	entry->flags = cpu_to_le32(tx_flags);
-	/* We must be sure this has been written before followings HW
-	 * register write, because this write will made the HW attempts
-	 * to DMA the just-written data
-	 */
-	wmb();
-
-	__skb_queue_tail(&ring->queue, skb);
-	if (ring->entries - skb_queue_len(&ring->queue) < 2)
-		ieee80211_stop_queue(dev, prio);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-		/* just poll: rings are stopped with TPPollStop reg */
-		hw_prio = rtl8187se_queues_map[prio];
-		rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
-			 (1 << hw_prio));
-	} else {
-		hw_prio = rtl8180_queues_map[prio];
-		rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
-			 (1 << hw_prio) | /* ring to poll  */
-			 (1<<1) | (1<<2));/* stopped rings */
-	}
-}
-
-static void rtl8180_set_anaparam3(struct rtl8180_priv *priv, u16 anaparam3)
-{
-	u8 reg;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-
-	rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3);
-
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-}
-
-void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2)
-{
-	u8 reg;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
-
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-}
-
-void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
-{
-	u8 reg;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-}
-
-static void rtl8187se_mac_config(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 reg;
-
-	rtl818x_iowrite32(priv, REG_ADDR4(0x1F0), 0);
-	rtl818x_ioread32(priv, REG_ADDR4(0x1F0));
-	rtl818x_iowrite32(priv, REG_ADDR4(0x1F4), 0);
-	rtl818x_ioread32(priv, REG_ADDR4(0x1F4));
-	rtl818x_iowrite8(priv, REG_ADDR1(0x1F8), 0);
-	rtl818x_ioread8(priv, REG_ADDR1(0x1F8));
-	/* Enable DA10 TX power saving */
-	reg = rtl818x_ioread8(priv, &priv->map->PHY_PR);
-	rtl818x_iowrite8(priv, &priv->map->PHY_PR, reg | 0x04);
-	/* Power */
-	rtl818x_iowrite16(priv, PI_DATA_REG, 0x1000);
-	rtl818x_iowrite16(priv, SI_DATA_REG, 0x1000);
-	/* AFE - default to power ON */
-	rtl818x_iowrite16(priv, REG_ADDR2(0x370), 0x0560);
-	rtl818x_iowrite16(priv, REG_ADDR2(0x372), 0x0560);
-	rtl818x_iowrite16(priv, REG_ADDR2(0x374), 0x0DA4);
-	rtl818x_iowrite16(priv, REG_ADDR2(0x376), 0x0DA4);
-	rtl818x_iowrite16(priv, REG_ADDR2(0x378), 0x0560);
-	rtl818x_iowrite16(priv, REG_ADDR2(0x37A), 0x0560);
-	rtl818x_iowrite16(priv, REG_ADDR2(0x37C), 0x00EC);
-	rtl818x_iowrite16(priv, REG_ADDR2(0x37E), 0x00EC);
-	rtl818x_iowrite8(priv, REG_ADDR1(0x24E), 0x01);
-	/* unknown, needed for suspend to RAM resume */
-	rtl818x_iowrite8(priv, REG_ADDR1(0x0A), 0x72);
-}
-
-static void rtl8187se_set_antenna_config(struct ieee80211_hw *dev, u8 def_ant,
-					 bool diversity)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	rtl8225_write_phy_cck(dev, 0x0C, 0x09);
-	if (diversity) {
-		if (def_ant == 1) {
-			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
-			rtl8225_write_phy_cck(dev, 0x11, 0xBB);
-			rtl8225_write_phy_cck(dev, 0x01, 0xC7);
-			rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
-			rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
-		} else { /* main antenna */
-			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
-			rtl8225_write_phy_cck(dev, 0x11, 0x9B);
-			rtl8225_write_phy_cck(dev, 0x01, 0xC7);
-			rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
-			rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
-		}
-	} else { /* disable antenna diversity */
-		if (def_ant == 1) {
-			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
-			rtl8225_write_phy_cck(dev, 0x11, 0xBB);
-			rtl8225_write_phy_cck(dev, 0x01, 0x47);
-			rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
-			rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
-		} else { /* main antenna */
-			rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
-			rtl8225_write_phy_cck(dev, 0x11, 0x9B);
-			rtl8225_write_phy_cck(dev, 0x01, 0x47);
-			rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
-			rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
-		}
-	}
-	/* priv->curr_ant = def_ant; */
-}
-
-static void rtl8180_int_enable(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-		rtl818x_iowrite32(priv, &priv->map->IMR,
-			  IMR_TBDER | IMR_TBDOK |
-			  IMR_TVODER | IMR_TVODOK |
-			  IMR_TVIDER | IMR_TVIDOK |
-			  IMR_TBEDER | IMR_TBEDOK |
-			  IMR_TBKDER | IMR_TBKDOK |
-			  IMR_RDU | IMR_RER |
-			  IMR_ROK | IMR_RQOSOK);
-	} else {
-		rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
-	}
-}
-
-static void rtl8180_int_disable(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-		rtl818x_iowrite32(priv, &priv->map->IMR, 0);
-	} else {
-		rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
-	}
-}
-
-static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
-			    u32 basic_mask)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u16 reg;
-	u32 resp_mask;
-	u8 basic_max;
-	u8 resp_max, resp_min;
-
-	resp_mask = basic_mask;
-	/* IEEE80211 says the response rate should be equal to the highest basic
-	 * rate that is not faster than received frame. But it says also that if
-	 * the basic rate set does not contains any rate for the current
-	 * modulation class then mandatory rate set must be used for that
-	 * modulation class. Eventually add OFDM mandatory rates..
-	 */
-	if ((resp_mask & 0xf) == resp_mask)
-		resp_mask |= 0x150; /* 6, 12, 24Mbps */
-
-	switch (priv->chip_family) {
-
-	case RTL818X_CHIP_FAMILY_RTL8180:
-		/* in 8180 this is NOT a BITMAP */
-		basic_max = fls(basic_mask) - 1;
-		reg = rtl818x_ioread16(priv, &priv->map->BRSR);
-		reg &= ~3;
-		reg |= basic_max;
-		rtl818x_iowrite16(priv, &priv->map->BRSR, reg);
-		break;
-
-	case RTL818X_CHIP_FAMILY_RTL8185:
-		resp_max = fls(resp_mask) - 1;
-		resp_min = ffs(resp_mask) - 1;
-		/* in 8185 this is a BITMAP */
-		rtl818x_iowrite16(priv, &priv->map->BRSR, basic_mask);
-		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (resp_max << 4) |
-				resp_min);
-		break;
-
-	case RTL818X_CHIP_FAMILY_RTL8187SE:
-		/* in 8187se this is a BITMAP. BRSR reg actually sets
-		 * response rates.
-		 */
-		rtl818x_iowrite16(priv, &priv->map->BRSR_8187SE, resp_mask);
-		break;
-	}
-}
-
-static void rtl8180_config_cardbus(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u16 reg16;
-	u8 reg8;
-
-	reg8 = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	reg8 |= 1 << 1;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg8);
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-		rtl818x_iowrite16(priv, FEMR_SE, 0xffff);
-	} else {
-		reg16 = rtl818x_ioread16(priv, &priv->map->FEMR);
-			reg16 |= (1 << 15) | (1 << 14) | (1 << 4);
-		rtl818x_iowrite16(priv, &priv->map->FEMR, reg16);
-	}
-
-}
-
-static int rtl8180_init_hw(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u16 reg;
-	u32 reg32;
-
-	rtl818x_iowrite8(priv, &priv->map->CMD, 0);
-	rtl818x_ioread8(priv, &priv->map->CMD);
-	msleep(10);
-
-	/* reset */
-	rtl8180_int_disable(dev);
-	rtl818x_ioread8(priv, &priv->map->CMD);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg &= (1 << 1);
-	reg |= RTL818X_CMD_RESET;
-	rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
-	rtl818x_ioread8(priv, &priv->map->CMD);
-	msleep(200);
-
-	/* check success of reset */
-	if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
-		wiphy_err(dev->wiphy, "reset timeout!\n");
-		return -ETIMEDOUT;
-	}
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
-	rtl818x_ioread8(priv, &priv->map->CMD);
-	msleep(200);
-
-	if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
-		rtl8180_config_cardbus(dev);
-	}
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
-		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
-	else
-		rtl818x_iowrite8(priv, &priv->map->MSR, 0);
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
-		rtl8180_set_anaparam(priv, priv->anaparam);
-
-	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
-	/* mac80211 queue have higher prio for lower index. The last queue
-	 * (that mac80211 is not aware of) is reserved for beacons (and have
-	 * the highest priority on the NIC)
-	 */
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) {
-		rtl818x_iowrite32(priv, &priv->map->TBDA,
-				  priv->tx_ring[1].dma);
-		rtl818x_iowrite32(priv, &priv->map->TLPDA,
-				  priv->tx_ring[0].dma);
-	} else {
-		rtl818x_iowrite32(priv, &priv->map->TBDA,
-				  priv->tx_ring[4].dma);
-		rtl818x_iowrite32(priv, &priv->map->TVODA,
-				  priv->tx_ring[0].dma);
-		rtl818x_iowrite32(priv, &priv->map->TVIDA,
-				  priv->tx_ring[1].dma);
-		rtl818x_iowrite32(priv, &priv->map->TBEDA,
-				  priv->tx_ring[2].dma);
-		rtl818x_iowrite32(priv, &priv->map->TBKDA,
-				  priv->tx_ring[3].dma);
-	}
-
-	/* TODO: necessary? specs indicate not */
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
-		reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
-		rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
-	}
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	/* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
-
-	/* TODO: turn off hw wep on rtl8180 */
-
-	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
-
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
-		rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
-		rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0);
-	} else {
-		rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
-
-		rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
-		rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
-	}
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
-		/* TODO: set ClkRun enable? necessary? */
-		reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
-		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
-		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-		reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
-		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-		/* fix eccessive IFS after CTS-to-self */
-		if (priv->map_pio) {
-			u8 reg;
-
-			reg = rtl818x_ioread8(priv, &priv->map->PGSELECT);
-			rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
-			rtl818x_iowrite8(priv, REG_ADDR1(0xff), 0x35);
-			rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-		} else
-			rtl818x_iowrite8(priv, REG_ADDR1(0x1ff), 0x35);
-	}
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-
-		/* the set auto rate fallback bitmask from 1M to 54 Mb/s */
-		rtl818x_iowrite16(priv, ARFR, 0xFFF);
-		rtl818x_ioread16(priv, ARFR);
-
-		/* stop unused queus (no dma alloc) */
-		rtl818x_iowrite8(priv, &priv->map->TPPOLL_STOP,
-			       RTL818x_TPPOLL_STOP_MG | RTL818x_TPPOLL_STOP_HI);
-
-		rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0x00);
-		rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
-
-		rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
-
-		/* some black magic here.. */
-		rtl8187se_mac_config(dev);
-
-		rtl818x_iowrite16(priv, RFSW_CTRL, 0x569A);
-		rtl818x_ioread16(priv, RFSW_CTRL);
-
-		rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_ON);
-		rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_ON);
-		rtl8180_set_anaparam3(priv, RTL8225SE_ANAPARAM3);
-
-
-		rtl818x_iowrite8(priv, &priv->map->CONFIG5,
-			    rtl818x_ioread8(priv, &priv->map->CONFIG5) & 0x7F);
-
-		/*probably this switch led on */
-		rtl818x_iowrite8(priv, &priv->map->PGSELECT,
-			    rtl818x_ioread8(priv, &priv->map->PGSELECT) | 0x08);
-
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1BFF);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
-
-		rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x4003);
-
-		/* the reference code mac hardcode table write
-		 * this reg by doing byte-wide accesses.
-		 * It does it just for lowest and highest byte..
-		 */
-		reg32 = rtl818x_ioread32(priv, &priv->map->RF_PARA);
-		reg32 &= 0x00ffff00;
-		reg32 |= 0xb8000054;
-		rtl818x_iowrite32(priv, &priv->map->RF_PARA, reg32);
-	} else
-		/* stop unused queus (no dma alloc) */
-		rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
-			    (1<<1) | (1<<2));
-
-	priv->rf->init(dev);
-
-	/* default basic rates are 1,2 Mbps for rtl8180. 1,2,6,9,12,18,24 Mbps
-	 * otherwise. bitmask 0x3 and 0x01f3 respectively.
-	 * NOTE: currenty rtl8225 RF code changes basic rates, so we need to do
-	 * this after rf init.
-	 * TODO: try to find out whether RF code really needs to do this..
-	 */
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
-		rtl8180_conf_basic_rates(dev, 0x3);
-	else
-		rtl8180_conf_basic_rates(dev, 0x1f3);
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
-		rtl8187se_set_antenna_config(dev,
-					     priv->antenna_diversity_default,
-					     priv->antenna_diversity_en);
-	return 0;
-}
-
-static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl818x_rx_cmd_desc *entry;
-	int i;
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
-		priv->rx_ring_sz = sizeof(struct rtl8187se_rx_desc);
-	else
-		priv->rx_ring_sz = sizeof(struct rtl8180_rx_desc);
-
-	priv->rx_ring = pci_zalloc_consistent(priv->pdev, priv->rx_ring_sz * 32,
-					      &priv->rx_ring_dma);
-	if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
-		wiphy_err(dev->wiphy, "Cannot allocate RX ring\n");
-		return -ENOMEM;
-	}
-
-	priv->rx_idx = 0;
-
-	for (i = 0; i < 32; i++) {
-		struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
-		dma_addr_t *mapping;
-		entry = priv->rx_ring + priv->rx_ring_sz*i;
-		if (!skb) {
-			wiphy_err(dev->wiphy, "Cannot allocate RX skb\n");
-			return -ENOMEM;
-		}
-		priv->rx_buf[i] = skb;
-		mapping = (dma_addr_t *)skb->cb;
-		*mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
-					  MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
-
-		if (pci_dma_mapping_error(priv->pdev, *mapping)) {
-			kfree_skb(skb);
-			wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n");
-			return -ENOMEM;
-		}
-
-		entry->rx_buf = cpu_to_le32(*mapping);
-		entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
-					   MAX_RX_SIZE);
-	}
-	entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
-	return 0;
-}
-
-static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i;
-
-	for (i = 0; i < 32; i++) {
-		struct sk_buff *skb = priv->rx_buf[i];
-		if (!skb)
-			continue;
-
-		pci_unmap_single(priv->pdev,
-				 *((dma_addr_t *)skb->cb),
-				 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
-		kfree_skb(skb);
-	}
-
-	pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32,
-			    priv->rx_ring, priv->rx_ring_dma);
-	priv->rx_ring = NULL;
-}
-
-static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
-				unsigned int prio, unsigned int entries)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_tx_desc *ring;
-	dma_addr_t dma;
-	int i;
-
-	ring = pci_zalloc_consistent(priv->pdev, sizeof(*ring) * entries,
-				     &dma);
-	if (!ring || (unsigned long)ring & 0xFF) {
-		wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n",
-			  prio);
-		return -ENOMEM;
-	}
-
-	priv->tx_ring[prio].desc = ring;
-	priv->tx_ring[prio].dma = dma;
-	priv->tx_ring[prio].idx = 0;
-	priv->tx_ring[prio].entries = entries;
-	skb_queue_head_init(&priv->tx_ring[prio].queue);
-
-	for (i = 0; i < entries; i++)
-		ring[i].next_tx_desc =
-			cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
-
-	return 0;
-}
-
-static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
-
-	while (skb_queue_len(&ring->queue)) {
-		struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
-		struct sk_buff *skb = __skb_dequeue(&ring->queue);
-
-		pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
-				 skb->len, PCI_DMA_TODEVICE);
-		kfree_skb(skb);
-		ring->idx = (ring->idx + 1) % ring->entries;
-	}
-
-	pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
-			    ring->desc, ring->dma);
-	ring->desc = NULL;
-}
-
-static int rtl8180_start(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int ret, i;
-	u32 reg;
-
-	ret = rtl8180_init_rx_ring(dev);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < (dev->queues + 1); i++)
-		if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
-			goto err_free_rings;
-
-	ret = rtl8180_init_hw(dev);
-	if (ret)
-		goto err_free_rings;
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-		ret = request_irq(priv->pdev->irq, rtl8187se_interrupt,
-			  IRQF_SHARED, KBUILD_MODNAME, dev);
-	} else {
-		ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
-			  IRQF_SHARED, KBUILD_MODNAME, dev);
-	}
-
-	if (ret) {
-		wiphy_err(dev->wiphy, "failed to register IRQ handler\n");
-		goto err_free_rings;
-	}
-
-	rtl8180_int_enable(dev);
-
-	/* in rtl8187se at MAR regs offset there is the management
-	 * TX descriptor DMA addres..
-	 */
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) {
-		rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
-		rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
-	}
-
-	reg = RTL818X_RX_CONF_ONLYERLPKT |
-	      RTL818X_RX_CONF_RX_AUTORESETPHY |
-	      RTL818X_RX_CONF_MGMT |
-	      RTL818X_RX_CONF_DATA |
-	      (7 << 8 /* MAX RX DMA */) |
-	      RTL818X_RX_CONF_BROADCAST |
-	      RTL818X_RX_CONF_NICMAC;
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185)
-		reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
-	else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
-		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
-			? RTL818X_RX_CONF_CSDM1 : 0;
-		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
-			? RTL818X_RX_CONF_CSDM2 : 0;
-	} else {
-		reg &= ~(RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2);
-	}
-
-	priv->rx_conf = reg;
-	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
-
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
-		reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
-
-		/* CW is not on per-packet basis.
-		 * in rtl8185 the CW_VALUE reg is used.
-		 * in rtl8187se the AC param regs are used.
-		 */
-		reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
-		/* retry limit IS on per-packet basis.
-		 * the short and long retry limit in TX_CONF
-		 * reg are ignored
-		 */
-		reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
-		rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
-
-		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-		/* TX antenna and TX gain are not on per-packet basis.
-		 * TX Antenna is selected by ANTSEL reg (RX in BB regs).
-		 * TX gain is selected with CCK_TX_AGC and OFDM_TX_AGC regs
-		 */
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
-		reg |=  RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
-		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
-
-		/* disable early TX */
-		rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
-	}
-
-	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-	reg |= (6 << 21 /* MAX TX DMA */) |
-	       RTL818X_TX_CONF_NO_ICV;
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
-		reg |= 1<<30;  /*  "duration procedure mode" */
-
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
-		reg &= ~RTL818X_TX_CONF_PROBE_DTS;
-	else
-		reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
-
-	reg &= ~RTL818X_TX_CONF_DISCW;
-
-	/* different meaning, same value on both rtl8185 and rtl8180 */
-	reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
-
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg |= RTL818X_CMD_RX_ENABLE;
-	reg |= RTL818X_CMD_TX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-
-	return 0;
-
- err_free_rings:
-	rtl8180_free_rx_ring(dev);
-	for (i = 0; i < (dev->queues + 1); i++)
-		if (priv->tx_ring[i].desc)
-			rtl8180_free_tx_ring(dev, i);
-
-	return ret;
-}
-
-static void rtl8180_stop(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 reg;
-	int i;
-
-	rtl8180_int_disable(dev);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg &= ~RTL818X_CMD_TX_ENABLE;
-	reg &= ~RTL818X_CMD_RX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-
-	priv->rf->stop(dev);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	free_irq(priv->pdev->irq, dev);
-
-	rtl8180_free_rx_ring(dev);
-	for (i = 0; i < (dev->queues + 1); i++)
-		rtl8180_free_tx_ring(dev, i);
-}
-
-static u64 rtl8180_get_tsf(struct ieee80211_hw *dev,
-			   struct ieee80211_vif *vif)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
-	       (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
-}
-
-static void rtl8180_beacon_work(struct work_struct *work)
-{
-	struct rtl8180_vif *vif_priv =
-		container_of(work, struct rtl8180_vif, beacon_work.work);
-	struct ieee80211_vif *vif =
-		container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
-	struct ieee80211_hw *dev = vif_priv->dev;
-	struct ieee80211_mgmt *mgmt;
-	struct sk_buff *skb;
-
-	/* don't overflow the tx ring */
-	if (ieee80211_queue_stopped(dev, 0))
-		goto resched;
-
-	/* grab a fresh beacon */
-	skb = ieee80211_beacon_get(dev, vif);
-	if (!skb)
-		goto resched;
-
-	/*
-	 * update beacon timestamp w/ TSF value
-	 * TODO: make hardware update beacon timestamp
-	 */
-	mgmt = (struct ieee80211_mgmt *)skb->data;
-	mgmt->u.beacon.timestamp = cpu_to_le64(rtl8180_get_tsf(dev, vif));
-
-	/* TODO: use actual beacon queue */
-	skb_set_queue_mapping(skb, 0);
-
-	rtl8180_tx(dev, NULL, skb);
-
-resched:
-	/*
-	 * schedule next beacon
-	 * TODO: use hardware support for beacon timing
-	 */
-	schedule_delayed_work(&vif_priv->beacon_work,
-			usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
-}
-
-static int rtl8180_add_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_vif *vif)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_vif *vif_priv;
-
-	/*
-	 * We only support one active interface at a time.
-	 */
-	if (priv->vif)
-		return -EBUSY;
-
-	switch (vif->type) {
-	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_ADHOC:
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	priv->vif = vif;
-
-	/* Initialize driver private area */
-	vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
-	vif_priv->dev = dev;
-	INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8180_beacon_work);
-	vif_priv->enable_beacon = false;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
-			  le32_to_cpu(*(__le32 *)vif->addr));
-	rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
-			  le16_to_cpu(*(__le16 *)(vif->addr + 4)));
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	return 0;
-}
-
-static void rtl8180_remove_interface(struct ieee80211_hw *dev,
-				     struct ieee80211_vif *vif)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	priv->vif = NULL;
-}
-
-static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct ieee80211_conf *conf = &dev->conf;
-
-	priv->rf->set_chan(dev, conf);
-
-	return 0;
-}
-
-static void rtl8187se_conf_ac_parm(struct ieee80211_hw *dev, u8 queue)
-{
-	const struct ieee80211_tx_queue_params *params;
-	struct rtl8180_priv *priv = dev->priv;
-
-	/* hw value */
-	u32 ac_param;
-
-	u8 aifs;
-	u8 txop;
-	u8 cw_min, cw_max;
-
-	params = &priv->queue_param[queue];
-
-	cw_min = fls(params->cw_min);
-	cw_max = fls(params->cw_max);
-
-	aifs = 10 + params->aifs * priv->slot_time;
-
-	/* TODO: check if txop HW is in us (mult by 32) */
-	txop = params->txop;
-
-	ac_param = txop << AC_PARAM_TXOP_LIMIT_SHIFT |
-		cw_max << AC_PARAM_ECW_MAX_SHIFT |
-		cw_min << AC_PARAM_ECW_MIN_SHIFT |
-		aifs << AC_PARAM_AIFS_SHIFT;
-
-	switch (queue) {
-	case IEEE80211_AC_BK:
-		rtl818x_iowrite32(priv, &priv->map->AC_BK_PARAM, ac_param);
-		break;
-	case IEEE80211_AC_BE:
-		rtl818x_iowrite32(priv, &priv->map->AC_BE_PARAM, ac_param);
-		break;
-	case IEEE80211_AC_VI:
-		rtl818x_iowrite32(priv, &priv->map->AC_VI_PARAM, ac_param);
-		break;
-	case IEEE80211_AC_VO:
-		rtl818x_iowrite32(priv, &priv->map->AC_VO_PARAM, ac_param);
-		break;
-	}
-}
-
-static int rtl8180_conf_tx(struct ieee80211_hw *dev,
-			    struct ieee80211_vif *vif, u16 queue,
-			    const struct ieee80211_tx_queue_params *params)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 cw_min, cw_max;
-
-	/* nothing to do ? */
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
-		return 0;
-
-	cw_min = fls(params->cw_min);
-	cw_max = fls(params->cw_max);
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-		priv->queue_param[queue] = *params;
-		rtl8187se_conf_ac_parm(dev, queue);
-	} else
-		rtl818x_iowrite8(priv, &priv->map->CW_VAL,
-				 (cw_max << 4) | cw_min);
-	return 0;
-}
-
-static void rtl8180_conf_erp(struct ieee80211_hw *dev,
-			    struct ieee80211_bss_conf *info)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 sifs, difs;
-	int eifs;
-	u8 hw_eifs;
-
-	/* TODO: should we do something ? */
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
-		return;
-
-	/* I _hope_ this means 10uS for the HW.
-	 * In reference code it is 0x22 for
-	 * both rtl8187L and rtl8187SE
-	 */
-	sifs = 0x22;
-
-	if (info->use_short_slot)
-		priv->slot_time = 9;
-	else
-		priv->slot_time = 20;
-
-	/* 10 is SIFS time in uS */
-	difs = 10 + 2 * priv->slot_time;
-	eifs = 10 + difs + priv->ack_time;
-
-	/* HW should use 4uS units for EIFS (I'm sure for rtl8185)*/
-	hw_eifs = DIV_ROUND_UP(eifs, 4);
-
-
-	rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
-	rtl818x_iowrite8(priv, &priv->map->SIFS, sifs);
-	rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
-
-	/* from reference code. set ack timeout reg = eifs reg */
-	rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs);
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
-		rtl818x_iowrite8(priv, &priv->map->EIFS_8187SE, hw_eifs);
-	else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
-		/* rtl8187/rtl8185 HW bug. After EIFS is elapsed,
-		 * the HW still wait for DIFS.
-		 * HW uses 4uS units for EIFS.
-		 */
-		hw_eifs = DIV_ROUND_UP(eifs - difs, 4);
-
-		rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs);
-	}
-}
-
-static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *info,
-				     u32 changed)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	struct rtl8180_vif *vif_priv;
-	int i;
-	u8 reg;
-
-	vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
-
-	if (changed & BSS_CHANGED_BSSID) {
-		rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->BSSID[0],
-				  le16_to_cpu(*(__le16 *)info->bssid));
-		rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->BSSID[2],
-				  le32_to_cpu(*(__le32 *)(info->bssid + 2)));
-
-		if (is_valid_ether_addr(info->bssid)) {
-			if (vif->type == NL80211_IFTYPE_ADHOC)
-				reg = RTL818X_MSR_ADHOC;
-			else
-				reg = RTL818X_MSR_INFRA;
-		} else
-			reg = RTL818X_MSR_NO_LINK;
-
-		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
-			reg |= RTL818X_MSR_ENEDCA;
-
-		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
-	}
-
-	if (changed & BSS_CHANGED_BASIC_RATES)
-		rtl8180_conf_basic_rates(dev, info->basic_rates);
-
-	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) {
-
-		/* when preamble changes, acktime duration changes, and erp must
-		 * be recalculated. ACK time is calculated at lowest rate.
-		 * Since mac80211 include SIFS time we remove it (-10)
-		 */
-		priv->ack_time =
-			le16_to_cpu(ieee80211_generic_frame_duration(dev,
-					priv->vif,
-					IEEE80211_BAND_2GHZ, 10,
-					&priv->rates[0])) - 10;
-
-		rtl8180_conf_erp(dev, info);
-
-		/* mac80211 supplies aifs_n to driver and calls
-		 * conf_tx callback whether aifs_n changes, NOT
-		 * when aifs changes.
-		 * Aifs should be recalculated if slot changes.
-		 */
-		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-			for (i = 0; i < 4; i++)
-				rtl8187se_conf_ac_parm(dev, i);
-		}
-	}
-
-	if (changed & BSS_CHANGED_BEACON_ENABLED)
-		vif_priv->enable_beacon = info->enable_beacon;
-
-	if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
-		cancel_delayed_work_sync(&vif_priv->beacon_work);
-		if (vif_priv->enable_beacon)
-			schedule_work(&vif_priv->beacon_work.work);
-	}
-}
-
-static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev,
-				     struct netdev_hw_addr_list *mc_list)
-{
-	return netdev_hw_addr_list_count(mc_list);
-}
-
-static void rtl8180_configure_filter(struct ieee80211_hw *dev,
-				     unsigned int changed_flags,
-				     unsigned int *total_flags,
-				     u64 multicast)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	if (changed_flags & FIF_FCSFAIL)
-		priv->rx_conf ^= RTL818X_RX_CONF_FCS;
-	if (changed_flags & FIF_CONTROL)
-		priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
-	if (changed_flags & FIF_OTHER_BSS)
-		priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
-	if (*total_flags & FIF_ALLMULTI || multicast > 0)
-		priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
-	else
-		priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
-
-	*total_flags = 0;
-
-	if (priv->rx_conf & RTL818X_RX_CONF_FCS)
-		*total_flags |= FIF_FCSFAIL;
-	if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
-		*total_flags |= FIF_CONTROL;
-	if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
-		*total_flags |= FIF_OTHER_BSS;
-	if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
-		*total_flags |= FIF_ALLMULTI;
-
-	rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
-}
-
-static const struct ieee80211_ops rtl8180_ops = {
-	.tx			= rtl8180_tx,
-	.start			= rtl8180_start,
-	.stop			= rtl8180_stop,
-	.add_interface		= rtl8180_add_interface,
-	.remove_interface	= rtl8180_remove_interface,
-	.config			= rtl8180_config,
-	.bss_info_changed	= rtl8180_bss_info_changed,
-	.conf_tx		= rtl8180_conf_tx,
-	.prepare_multicast	= rtl8180_prepare_multicast,
-	.configure_filter	= rtl8180_configure_filter,
-	.get_tsf		= rtl8180_get_tsf,
-};
-
-static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
-{
-	struct rtl8180_priv *priv = eeprom->data;
-	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-
-	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
-	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
-	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
-	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
-}
-
-static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
-{
-	struct rtl8180_priv *priv = eeprom->data;
-	u8 reg = 2 << 6;
-
-	if (eeprom->reg_data_in)
-		reg |= RTL818X_EEPROM_CMD_WRITE;
-	if (eeprom->reg_data_out)
-		reg |= RTL818X_EEPROM_CMD_READ;
-	if (eeprom->reg_data_clock)
-		reg |= RTL818X_EEPROM_CMD_CK;
-	if (eeprom->reg_chip_select)
-		reg |= RTL818X_EEPROM_CMD_CS;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(10);
-}
-
-static void rtl8180_eeprom_read(struct rtl8180_priv *priv)
-{
-	struct eeprom_93cx6 eeprom;
-	int eeprom_cck_table_adr;
-	u16 eeprom_val;
-	int i;
-
-	eeprom.data = priv;
-	eeprom.register_read = rtl8180_eeprom_register_read;
-	eeprom.register_write = rtl8180_eeprom_register_write;
-	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
-		eeprom.width = PCI_EEPROM_WIDTH_93C66;
-	else
-		eeprom.width = PCI_EEPROM_WIDTH_93C46;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			RTL818X_EEPROM_CMD_PROGRAM);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(10);
-
-	eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
-	eeprom_val &= 0xFF;
-	priv->rf_type = eeprom_val;
-
-	eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
-	priv->csthreshold = eeprom_val >> 8;
-
-	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3);
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
-		eeprom_cck_table_adr = 0x30;
-	else
-		eeprom_cck_table_adr = 0x10;
-
-	/* CCK TX power */
-	for (i = 0; i < 14; i += 2) {
-		u16 txpwr;
-		eeprom_93cx6_read(&eeprom, eeprom_cck_table_adr + (i >> 1),
-				&txpwr);
-		priv->channels[i].hw_value = txpwr & 0xFF;
-		priv->channels[i + 1].hw_value = txpwr >> 8;
-	}
-
-	/* OFDM TX power */
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
-		for (i = 0; i < 14; i += 2) {
-			u16 txpwr;
-			eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
-			priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
-			priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
-		}
-	}
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
-		__le32 anaparam;
-		eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
-		priv->anaparam = le32_to_cpu(anaparam);
-		eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
-	}
-
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
-		eeprom_93cx6_read(&eeprom, 0x3F, &eeprom_val);
-		priv->antenna_diversity_en = !!(eeprom_val & 0x100);
-		priv->antenna_diversity_default = (eeprom_val & 0xC00) == 0x400;
-
-		eeprom_93cx6_read(&eeprom, 0x7C, &eeprom_val);
-		priv->xtal_out = eeprom_val & 0xF;
-		priv->xtal_in = (eeprom_val & 0xF0) >> 4;
-		priv->xtal_cal = !!(eeprom_val & 0x1000);
-		priv->thermal_meter_val = (eeprom_val & 0xF00) >> 8;
-		priv->thermal_meter_en = !!(eeprom_val & 0x2000);
-	}
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			RTL818X_EEPROM_CMD_NORMAL);
-}
-
-static int rtl8180_probe(struct pci_dev *pdev,
-				   const struct pci_device_id *id)
-{
-	struct ieee80211_hw *dev;
-	struct rtl8180_priv *priv;
-	unsigned long mem_addr, mem_len;
-	unsigned int io_addr, io_len;
-	int err;
-	const char *chip_name, *rf_name = NULL;
-	u32 reg;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
-		       pci_name(pdev));
-		return err;
-	}
-
-	err = pci_request_regions(pdev, KBUILD_MODNAME);
-	if (err) {
-		printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
-		       pci_name(pdev));
-		return err;
-	}
-
-	io_addr = pci_resource_start(pdev, 0);
-	io_len = pci_resource_len(pdev, 0);
-	mem_addr = pci_resource_start(pdev, 1);
-	mem_len = pci_resource_len(pdev, 1);
-
-	if (mem_len < sizeof(struct rtl818x_csr) ||
-	    io_len < sizeof(struct rtl818x_csr)) {
-		printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
-		       pci_name(pdev));
-		err = -ENOMEM;
-		goto err_free_reg;
-	}
-
-	if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
-	    (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
-		printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
-		       pci_name(pdev));
-		goto err_free_reg;
-	}
-
-	pci_set_master(pdev);
-
-	dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
-	if (!dev) {
-		printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
-		       pci_name(pdev));
-		err = -ENOMEM;
-		goto err_free_reg;
-	}
-
-	priv = dev->priv;
-	priv->pdev = pdev;
-
-	dev->max_rates = 1;
-	SET_IEEE80211_DEV(dev, &pdev->dev);
-	pci_set_drvdata(pdev, dev);
-
-	priv->map_pio = false;
-	priv->map = pci_iomap(pdev, 1, mem_len);
-	if (!priv->map) {
-		priv->map = pci_iomap(pdev, 0, io_len);
-		priv->map_pio = true;
-	}
-
-	if (!priv->map) {
-		dev_err(&pdev->dev, "Cannot map device memory/PIO\n");
-		err = -ENOMEM;
-		goto err_free_dev;
-	}
-
-	BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
-	BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
-
-	memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
-	memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
-
-	priv->band.band = IEEE80211_BAND_2GHZ;
-	priv->band.channels = priv->channels;
-	priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
-	priv->band.bitrates = priv->rates;
-	priv->band.n_bitrates = 4;
-	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
-
-	ieee80211_hw_set(dev, HOST_BROADCAST_PS_BUFFERING);
-	ieee80211_hw_set(dev, RX_INCLUDES_FCS);
-
-	dev->vif_data_size = sizeof(struct rtl8180_vif);
-	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
-					BIT(NL80211_IFTYPE_ADHOC);
-	dev->max_signal = 65;
-
-	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-	reg &= RTL818X_TX_CONF_HWVER_MASK;
-	switch (reg) {
-	case RTL818X_TX_CONF_R8180_ABCD:
-		chip_name = "RTL8180";
-		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
-		break;
-
-	case RTL818X_TX_CONF_R8180_F:
-		chip_name = "RTL8180vF";
-		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
-		break;
-
-	case RTL818X_TX_CONF_R8185_ABC:
-		chip_name = "RTL8185";
-		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
-		break;
-
-	case RTL818X_TX_CONF_R8185_D:
-		chip_name = "RTL8185vD";
-		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
-		break;
-
-	case RTL818X_TX_CONF_RTL8187SE:
-		chip_name = "RTL8187SE";
-		if (priv->map_pio) {
-			dev_err(&pdev->dev,
-				"MMIO failed. PIO not supported on RTL8187SE\n");
-			err = -ENOMEM;
-			goto err_iounmap;
-		}
-		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8187SE;
-		break;
-
-	default:
-		printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
-		       pci_name(pdev), reg >> 25);
-		err = -ENODEV;
-		goto err_iounmap;
-	}
-
-	/* we declare to MAC80211 all the queues except for beacon queue
-	 * that will be eventually handled by DRV.
-	 * TX rings are arranged in such a way that lower is the IDX,
-	 * higher is the priority, in order to achieve direct mapping
-	 * with mac80211, however the beacon queue is an exception and it
-	 * is mapped on the highst tx ring IDX.
-	 */
-	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
-		dev->queues = RTL8187SE_NR_TX_QUEUES - 1;
-	else
-		dev->queues = RTL8180_NR_TX_QUEUES - 1;
-
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
-		priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
-		pci_try_set_mwi(pdev);
-	}
-
-	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
-		ieee80211_hw_set(dev, SIGNAL_DBM);
-	else
-		ieee80211_hw_set(dev, SIGNAL_UNSPEC);
-
-	rtl8180_eeprom_read(priv);
-
-	switch (priv->rf_type) {
-	case 1:	rf_name = "Intersil";
-		break;
-	case 2:	rf_name = "RFMD";
-		break;
-	case 3:	priv->rf = &sa2400_rf_ops;
-		break;
-	case 4:	priv->rf = &max2820_rf_ops;
-		break;
-	case 5:	priv->rf = &grf5101_rf_ops;
-		break;
-	case 9:
-		if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
-			priv->rf = rtl8187se_detect_rf(dev);
-		else
-			priv->rf = rtl8180_detect_rf(dev);
-		break;
-	case 10:
-		rf_name = "RTL8255";
-		break;
-	default:
-		printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
-		       pci_name(pdev), priv->rf_type);
-		err = -ENODEV;
-		goto err_iounmap;
-	}
-
-	if (!priv->rf) {
-		printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
-		       pci_name(pdev), rf_name);
-		err = -ENODEV;
-		goto err_iounmap;
-	}
-
-	if (!is_valid_ether_addr(priv->mac_addr)) {
-		printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
-		       " randomly generated MAC addr\n", pci_name(pdev));
-		eth_random_addr(priv->mac_addr);
-	}
-	SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr);
-
-	spin_lock_init(&priv->lock);
-
-	err = ieee80211_register_hw(dev);
-	if (err) {
-		printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
-		       pci_name(pdev));
-		goto err_iounmap;
-	}
-
-	wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n",
-		   priv->mac_addr, chip_name, priv->rf->name);
-
-	return 0;
-
- err_iounmap:
-	pci_iounmap(pdev, priv->map);
-
- err_free_dev:
-	ieee80211_free_hw(dev);
-
- err_free_reg:
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	return err;
-}
-
-static void rtl8180_remove(struct pci_dev *pdev)
-{
-	struct ieee80211_hw *dev = pci_get_drvdata(pdev);
-	struct rtl8180_priv *priv;
-
-	if (!dev)
-		return;
-
-	ieee80211_unregister_hw(dev);
-
-	priv = dev->priv;
-
-	pci_iounmap(pdev, priv->map);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	ieee80211_free_hw(dev);
-}
-
-#ifdef CONFIG_PM
-static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-	return 0;
-}
-
-static int rtl8180_resume(struct pci_dev *pdev)
-{
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-static struct pci_driver rtl8180_driver = {
-	.name		= KBUILD_MODNAME,
-	.id_table	= rtl8180_table,
-	.probe		= rtl8180_probe,
-	.remove		= rtl8180_remove,
-#ifdef CONFIG_PM
-	.suspend	= rtl8180_suspend,
-	.resume		= rtl8180_resume,
-#endif /* CONFIG_PM */
-};
-
-module_pci_driver(rtl8180_driver);
diff --git a/drivers/net/wireless/rtl818x/rtl8180/grf5101.c b/drivers/net/wireless/rtl818x/rtl8180/grf5101.c
deleted file mode 100644
index b1bfee738..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/grf5101.c
+++ /dev/null
@@ -1,190 +0,0 @@
-
-/*
- * Radio tuning for GCT GRF5101 on RTL8180
- *
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Code from the BSD driver and the rtl8181 project have been
- * very useful to understand certain things
- *
- * I want to thanks the Authors of such projects and the Ndiswrapper
- * project Authors.
- *
- * A special Big Thanks also is for all people who donated me cards,
- * making possible the creation of the original rtl8180 driver
- * from which this code is derived!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <net/mac80211.h>
-
-#include "rtl8180.h"
-#include "grf5101.h"
-
-static const int grf5101_encode[] = {
-	0x0, 0x8, 0x4, 0xC,
-	0x2, 0xA, 0x6, 0xE,
-	0x1, 0x9, 0x5, 0xD,
-	0x3, 0xB, 0x7, 0xF
-};
-
-static void write_grf5101(struct ieee80211_hw *dev, u8 addr, u32 data)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u32 phy_config;
-
-	phy_config =  grf5101_encode[(data >> 8) & 0xF];
-	phy_config |= grf5101_encode[(data >> 4) & 0xF] << 4;
-	phy_config |= grf5101_encode[data & 0xF] << 8;
-	phy_config |= grf5101_encode[(addr >> 1) & 0xF] << 12;
-	phy_config |= (addr & 1) << 16;
-	phy_config |= grf5101_encode[(data & 0xf000) >> 12] << 24;
-
-	/* MAC will bang bits to the chip */
-	phy_config |= 0x90000000;
-
-	rtl818x_iowrite32(priv,
-		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
-
-	msleep(3);
-}
-
-static void grf5101_write_phy_antenna(struct ieee80211_hw *dev, short chan)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 ant = GRF5101_ANTENNA;
-
-	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
-		ant |= BB_ANTENNA_B;
-
-	if (chan == 14)
-		ant |= BB_ANTATTEN_CHAN14;
-
-	rtl8180_write_phy(dev, 0x10, ant);
-}
-
-static u8 grf5101_rf_calc_rssi(u8 agc, u8 sq)
-{
-	if (agc > 60)
-		return 65;
-
-	/* TODO(?): just return agc (or agc + 5) to avoid mult / div */
-	return 65 * agc / 60;
-}
-
-static void grf5101_rf_set_channel(struct ieee80211_hw *dev,
-				   struct ieee80211_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int channel =
-		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
-	u32 txpw = priv->channels[channel - 1].hw_value & 0xFF;
-	u32 chan = channel - 1;
-
-	/* set TX power */
-	write_grf5101(dev, 0x15, 0x0);
-	write_grf5101(dev, 0x06, txpw);
-	write_grf5101(dev, 0x15, 0x10);
-	write_grf5101(dev, 0x15, 0x0);
-
-	/* set frequency */
-	write_grf5101(dev, 0x07, 0x0);
-	write_grf5101(dev, 0x0B, chan);
-	write_grf5101(dev, 0x07, 0x1000);
-
-	grf5101_write_phy_antenna(dev, channel);
-}
-
-static void grf5101_rf_stop(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u32 anaparam;
-
-	anaparam = priv->anaparam;
-	anaparam &= 0x000fffff;
-	anaparam |= 0x3f900000;
-	rtl8180_set_anaparam(priv, anaparam);
-
-	write_grf5101(dev, 0x07, 0x0);
-	write_grf5101(dev, 0x1f, 0x45);
-	write_grf5101(dev, 0x1f, 0x5);
-	write_grf5101(dev, 0x00, 0x8e4);
-}
-
-static void grf5101_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	rtl8180_set_anaparam(priv, priv->anaparam);
-
-	write_grf5101(dev, 0x1f, 0x0);
-	write_grf5101(dev, 0x1f, 0x0);
-	write_grf5101(dev, 0x1f, 0x40);
-	write_grf5101(dev, 0x1f, 0x60);
-	write_grf5101(dev, 0x1f, 0x61);
-	write_grf5101(dev, 0x1f, 0x61);
-	write_grf5101(dev, 0x00, 0xae4);
-	write_grf5101(dev, 0x1f, 0x1);
-	write_grf5101(dev, 0x1f, 0x41);
-	write_grf5101(dev, 0x1f, 0x61);
-
-	write_grf5101(dev, 0x01, 0x1a23);
-	write_grf5101(dev, 0x02, 0x4971);
-	write_grf5101(dev, 0x03, 0x41de);
-	write_grf5101(dev, 0x04, 0x2d80);
-	write_grf5101(dev, 0x05, 0x68ff);	/* 0x61ff original value */
-	write_grf5101(dev, 0x06, 0x0);
-	write_grf5101(dev, 0x07, 0x0);
-	write_grf5101(dev, 0x08, 0x7533);
-	write_grf5101(dev, 0x09, 0xc401);
-	write_grf5101(dev, 0x0a, 0x0);
-	write_grf5101(dev, 0x0c, 0x1c7);
-	write_grf5101(dev, 0x0d, 0x29d3);
-	write_grf5101(dev, 0x0e, 0x2e8);
-	write_grf5101(dev, 0x10, 0x192);
-	write_grf5101(dev, 0x11, 0x248);
-	write_grf5101(dev, 0x12, 0x0);
-	write_grf5101(dev, 0x13, 0x20c4);
-	write_grf5101(dev, 0x14, 0xf4fc);
-	write_grf5101(dev, 0x15, 0x0);
-	write_grf5101(dev, 0x16, 0x1500);
-
-	write_grf5101(dev, 0x07, 0x1000);
-
-	/* baseband configuration */
-	rtl8180_write_phy(dev, 0, 0xa8);
-	rtl8180_write_phy(dev, 3, 0x0);
-	rtl8180_write_phy(dev, 4, 0xc0);
-	rtl8180_write_phy(dev, 5, 0x90);
-	rtl8180_write_phy(dev, 6, 0x1e);
-	rtl8180_write_phy(dev, 7, 0x64);
-
-	grf5101_write_phy_antenna(dev, 1);
-
-	rtl8180_write_phy(dev, 0x11, 0x88);
-
-	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
-	    RTL818X_CONFIG2_ANTENNA_DIV)
-		rtl8180_write_phy(dev, 0x12, 0xc0); /* enable ant diversity */
-	else
-		rtl8180_write_phy(dev, 0x12, 0x40); /* disable ant diversity */
-
-	rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
-
-	rtl8180_write_phy(dev, 0x19, 0x0);
-	rtl8180_write_phy(dev, 0x1a, 0xa0);
-	rtl8180_write_phy(dev, 0x1b, 0x44);
-}
-
-const struct rtl818x_rf_ops grf5101_rf_ops = {
-	.name		= "GCT",
-	.init		= grf5101_rf_init,
-	.stop		= grf5101_rf_stop,
-	.set_chan	= grf5101_rf_set_channel,
-	.calc_rssi	= grf5101_rf_calc_rssi,
-};
diff --git a/drivers/net/wireless/rtl818x/rtl8180/grf5101.h b/drivers/net/wireless/rtl818x/rtl8180/grf5101.h
deleted file mode 100644
index 4d80a2785..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/grf5101.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef RTL8180_GRF5101_H
-#define RTL8180_GRF5101_H
-
-/*
- * Radio tuning for GCT GRF5101 on RTL8180
- *
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Code from the BSD driver and the rtl8181 project have been
- * very useful to understand certain things
- *
- * I want to thanks the Authors of such projects and the Ndiswrapper
- * project Authors.
- *
- * A special Big Thanks also is for all people who donated me cards,
- * making possible the creation of the original rtl8180 driver
- * from which this code is derived!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define GRF5101_ANTENNA 0xA3
-
-extern const struct rtl818x_rf_ops grf5101_rf_ops;
-
-#endif /* RTL8180_GRF5101_H */
diff --git a/drivers/net/wireless/rtl818x/rtl8180/max2820.c b/drivers/net/wireless/rtl818x/rtl8180/max2820.c
deleted file mode 100644
index eebf23976..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/max2820.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Radio tuning for Maxim max2820 on RTL8180
- *
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Code from the BSD driver and the rtl8181 project have been
- * very useful to understand certain things
- *
- * I want to thanks the Authors of such projects and the Ndiswrapper
- * project Authors.
- *
- * A special Big Thanks also is for all people who donated me cards,
- * making possible the creation of the original rtl8180 driver
- * from which this code is derived!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <net/mac80211.h>
-
-#include "rtl8180.h"
-#include "max2820.h"
-
-static const u32 max2820_chan[] = {
-	12, /* CH 1 */
-	17,
-	22,
-	27,
-	32,
-	37,
-	42,
-	47,
-	52,
-	57,
-	62,
-	67,
-	72,
-	84, /* CH 14 */
-};
-
-static void write_max2820(struct ieee80211_hw *dev, u8 addr, u32 data)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u32 phy_config;
-
-	phy_config = 0x90 + (data & 0xf);
-	phy_config <<= 16;
-	phy_config += addr;
-	phy_config <<= 8;
-	phy_config += (data >> 4) & 0xff;
-
-	rtl818x_iowrite32(priv,
-		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
-
-	msleep(1);
-}
-
-static void max2820_write_phy_antenna(struct ieee80211_hw *dev, short chan)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 ant;
-
-	ant = MAXIM_ANTENNA;
-	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
-		ant |= BB_ANTENNA_B;
-	if (chan == 14)
-		ant |= BB_ANTATTEN_CHAN14;
-
-	rtl8180_write_phy(dev, 0x10, ant);
-}
-
-static u8 max2820_rf_calc_rssi(u8 agc, u8 sq)
-{
-	bool odd;
-
-	odd = !!(agc & 1);
-
-	agc >>= 1;
-	if (odd)
-		agc += 76;
-	else
-		agc += 66;
-
-	/* TODO: change addends above to avoid mult / div below */
-	return 65 * agc / 100;
-}
-
-static void max2820_rf_set_channel(struct ieee80211_hw *dev,
-				   struct ieee80211_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int channel = conf ?
-		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq) : 1;
-	unsigned int chan_idx = channel - 1;
-	u32 txpw = priv->channels[chan_idx].hw_value & 0xFF;
-	u32 chan = max2820_chan[chan_idx];
-
-	/* While philips SA2400 drive the PA bias from
-	 * sa2400, for MAXIM we do this directly from BB */
-	rtl8180_write_phy(dev, 3, txpw);
-
-	max2820_write_phy_antenna(dev, channel);
-	write_max2820(dev, 3, chan);
-}
-
-static void max2820_rf_stop(struct ieee80211_hw *dev)
-{
-	rtl8180_write_phy(dev, 3, 0x8);
-	write_max2820(dev, 1, 0);
-}
-
-
-static void max2820_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	/* MAXIM from netbsd driver */
-	write_max2820(dev, 0, 0x007); /* test mode as indicated in datasheet */
-	write_max2820(dev, 1, 0x01e); /* enable register */
-	write_max2820(dev, 2, 0x001); /* synt register */
-
-	max2820_rf_set_channel(dev, NULL);
-
-	write_max2820(dev, 4, 0x313); /* rx register */
-
-	/* PA is driven directly by the BB, we keep the MAXIM bias
-	 * at the highest value in case that setting it to lower
-	 * values may introduce some further attenuation somewhere..
-	 */
-	write_max2820(dev, 5, 0x00f);
-
-	/* baseband configuration */
-	rtl8180_write_phy(dev, 0, 0x88); /* sys1       */
-	rtl8180_write_phy(dev, 3, 0x08); /* txagc      */
-	rtl8180_write_phy(dev, 4, 0xf8); /* lnadet     */
-	rtl8180_write_phy(dev, 5, 0x90); /* ifagcinit  */
-	rtl8180_write_phy(dev, 6, 0x1a); /* ifagclimit */
-	rtl8180_write_phy(dev, 7, 0x64); /* ifagcdet   */
-
-	max2820_write_phy_antenna(dev, 1);
-
-	rtl8180_write_phy(dev, 0x11, 0x88); /* trl */
-
-	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
-	    RTL818X_CONFIG2_ANTENNA_DIV)
-		rtl8180_write_phy(dev, 0x12, 0xc7);
-	else
-		rtl8180_write_phy(dev, 0x12, 0x47);
-
-	rtl8180_write_phy(dev, 0x13, 0x9b);
-
-	rtl8180_write_phy(dev, 0x19, 0x0);  /* CHESTLIM */
-	rtl8180_write_phy(dev, 0x1a, 0x9f); /* CHSQLIM  */
-
-	max2820_rf_set_channel(dev, NULL);
-}
-
-const struct rtl818x_rf_ops max2820_rf_ops = {
-	.name		= "Maxim",
-	.init		= max2820_rf_init,
-	.stop		= max2820_rf_stop,
-	.set_chan	= max2820_rf_set_channel,
-	.calc_rssi	= max2820_rf_calc_rssi,
-};
diff --git a/drivers/net/wireless/rtl818x/rtl8180/max2820.h b/drivers/net/wireless/rtl818x/rtl8180/max2820.h
deleted file mode 100644
index 8e982b72b..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/max2820.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef RTL8180_MAX2820_H
-#define RTL8180_MAX2820_H
-
-/*
- * Radio tuning for Maxim max2820 on RTL8180
- *
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Code from the BSD driver and the rtl8181 project have been
- * very useful to understand certain things
- *
- * I want to thanks the Authors of such projects and the Ndiswrapper
- * project Authors.
- *
- * A special Big Thanks also is for all people who donated me cards,
- * making possible the creation of the original rtl8180 driver
- * from which this code is derived!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define MAXIM_ANTENNA 0xb3
-
-extern const struct rtl818x_rf_ops max2820_rf_ops;
-
-#endif /* RTL8180_MAX2820_H */
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
deleted file mode 100644
index e8243a44d..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ /dev/null
@@ -1,185 +0,0 @@
-#ifndef RTL8180_H
-#define RTL8180_H
-
-#include "rtl818x.h"
-
-#define MAX_RX_SIZE IEEE80211_MAX_RTS_THRESHOLD
-
-#define RF_PARAM_ANALOGPHY	(1 << 0)
-#define RF_PARAM_ANTBDEFAULT	(1 << 1)
-#define RF_PARAM_CARRIERSENSE1	(1 << 2)
-#define RF_PARAM_CARRIERSENSE2	(1 << 3)
-
-#define BB_ANTATTEN_CHAN14	0x0C
-#define BB_ANTENNA_B 		0x40
-
-#define BB_HOST_BANG 		(1 << 30)
-#define BB_HOST_BANG_EN 	(1 << 2)
-#define BB_HOST_BANG_CLK 	(1 << 1)
-#define BB_HOST_BANG_DATA	1
-
-#define ANAPARAM_TXDACOFF_SHIFT	27
-#define ANAPARAM_PWR0_SHIFT	28
-#define ANAPARAM_PWR0_MASK 	(0x07 << ANAPARAM_PWR0_SHIFT)
-#define ANAPARAM_PWR1_SHIFT	20
-#define ANAPARAM_PWR1_MASK	(0x7F << ANAPARAM_PWR1_SHIFT)
-
-/* rtl8180/rtl8185 have 3 queue + beacon queue.
- * mac80211 can use just one, + beacon = 2 tot.
- */
-#define RTL8180_NR_TX_QUEUES 2
-
-/* rtl8187SE have 6 queues + beacon queues
- * mac80211 can use 4 QoS data queue, + beacon = 5 tot
- */
-#define RTL8187SE_NR_TX_QUEUES 5
-
-/* for array static allocation, it is the max of above */
-#define RTL818X_NR_TX_QUEUES 5
-
-struct rtl8180_tx_desc {
-	__le32 flags;
-	__le16 rts_duration;
-	__le16 plcp_len;
-	__le32 tx_buf;
-	union{
-		__le32 frame_len;
-		struct {
-			__le16 frame_len_se;
-			__le16 frame_duration;
-		} __packed;
-	} __packed;
-	__le32 next_tx_desc;
-	u8 cw;
-	u8 retry_limit;
-	u8 agc;
-	u8 flags2;
-	/* rsvd for 8180/8185.
-	 * valid for 8187se but we dont use it
-	 */
-	u32 reserved;
-	/* all rsvd for 8180/8185 */
-	__le16 flags3;
-	__le16 frag_qsize;
-} __packed;
-
-struct rtl818x_rx_cmd_desc {
-	__le32 flags;
-	u32 reserved;
-	__le32 rx_buf;
-} __packed;
-
-struct rtl8180_rx_desc {
-	__le32 flags;
-	__le32 flags2;
-	__le64 tsft;
-
-} __packed;
-
-struct rtl8187se_rx_desc {
-	__le32 flags;
-	__le64 tsft;
-	__le32 flags2;
-	__le32 flags3;
-	u32 reserved[3];
-} __packed;
-
-struct rtl8180_tx_ring {
-	struct rtl8180_tx_desc *desc;
-	dma_addr_t dma;
-	unsigned int idx;
-	unsigned int entries;
-	struct sk_buff_head queue;
-};
-
-struct rtl8180_vif {
-	struct ieee80211_hw *dev;
-
-	/* beaconing */
-	struct delayed_work beacon_work;
-	bool enable_beacon;
-};
-
-struct rtl8180_priv {
-	/* common between rtl818x drivers */
-	struct rtl818x_csr __iomem *map;
-	const struct rtl818x_rf_ops *rf;
-	struct ieee80211_vif *vif;
-
-	/* rtl8180 driver specific */
-	bool map_pio;
-	spinlock_t lock;
-	void *rx_ring;
-	u8 rx_ring_sz;
-	dma_addr_t rx_ring_dma;
-	unsigned int rx_idx;
-	struct sk_buff *rx_buf[32];
-	struct rtl8180_tx_ring tx_ring[RTL818X_NR_TX_QUEUES];
-	struct ieee80211_channel channels[14];
-	struct ieee80211_rate rates[12];
-	struct ieee80211_supported_band band;
-	struct ieee80211_tx_queue_params queue_param[4];
-	struct pci_dev *pdev;
-	u32 rx_conf;
-	u8 slot_time;
-	u16 ack_time;
-
-	enum {
-		RTL818X_CHIP_FAMILY_RTL8180,
-		RTL818X_CHIP_FAMILY_RTL8185,
-		RTL818X_CHIP_FAMILY_RTL8187SE,
-	} chip_family;
-	u32 anaparam;
-	u16 rfparam;
-	u8 csthreshold;
-	u8 mac_addr[ETH_ALEN];
-	u8 rf_type;
-	u8 xtal_out;
-	u8 xtal_in;
-	u8 xtal_cal;
-	u8 thermal_meter_val;
-	u8 thermal_meter_en;
-	u8 antenna_diversity_en;
-	u8 antenna_diversity_default;
-	/* sequence # */
-	u16 seqno;
-};
-
-void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
-void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam);
-void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2);
-
-static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, u8 __iomem *addr)
-{
-	return ioread8(addr);
-}
-
-static inline u16 rtl818x_ioread16(struct rtl8180_priv *priv, __le16 __iomem *addr)
-{
-	return ioread16(addr);
-}
-
-static inline u32 rtl818x_ioread32(struct rtl8180_priv *priv, __le32 __iomem *addr)
-{
-	return ioread32(addr);
-}
-
-static inline void rtl818x_iowrite8(struct rtl8180_priv *priv,
-				    u8 __iomem *addr, u8 val)
-{
-	iowrite8(val, addr);
-}
-
-static inline void rtl818x_iowrite16(struct rtl8180_priv *priv,
-				     __le16 __iomem *addr, u16 val)
-{
-	iowrite16(val, addr);
-}
-
-static inline void rtl818x_iowrite32(struct rtl8180_priv *priv,
-				     __le32 __iomem *addr, u32 val)
-{
-	iowrite32(val, addr);
-}
-
-#endif /* RTL8180_H */
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
deleted file mode 100644
index 9bda5bc78..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
+++ /dev/null
@@ -1,770 +0,0 @@
-
-/*
- * Radio tuning for RTL8225 on RTL8180
- *
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Based on the r8180 driver, which is:
- * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
- *
- * Thanks to Realtek for their support!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <net/mac80211.h>
-
-#include "rtl8180.h"
-#include "rtl8225.h"
-
-static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u16 reg80, reg84, reg82;
-	u32 bangdata;
-	int i;
-
-	bangdata = (data << 4) | (addr & 0xf);
-
-	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
-	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
-
-	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7 | 0x400);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(10);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(2);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(10);
-
-	for (i = 15; i >= 0; i--) {
-		u16 reg = reg80;
-
-		if (bangdata & (1 << i))
-			reg |= 1;
-
-		if (i & 1)
-			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
-
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
-
-		if (!(i & 1))
-			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(10);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x400);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-}
-
-static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u16 reg80, reg82, reg84, out;
-	int i;
-
-	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
-	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
-	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect) | 0x400;
-
-	reg80 &= ~0xF;
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(4);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(5);
-
-	for (i = 4; i >= 0; i--) {
-		u16 reg = reg80 | ((addr >> i) & 1);
-
-		if (!(i & 1)) {
-			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
-			rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-			udelay(1);
-		}
-
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg | (1 << 1));
-		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-		udelay(2);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg | (1 << 1));
-		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-		udelay(2);
-
-		if (i & 1) {
-			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
-			rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-			udelay(1);
-		}
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x000E);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x040E);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-			  reg80 | (1 << 3) | (1 << 1));
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(2);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-			  reg80 | (1 << 3));
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(2);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-			  reg80 | (1 << 3));
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(2);
-
-	out = 0;
-	for (i = 11; i >= 0; i--) {
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3));
-		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-		udelay(1);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3) | (1 << 1));
-		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-		udelay(2);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3) | (1 << 1));
-		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-		udelay(2);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3) | (1 << 1));
-		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-		udelay(2);
-
-		if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
-			out |= 1 << i;
-
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3));
-		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-		udelay(2);
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-			  reg80 | (1 << 3) | (1 << 2));
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(2);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
-
-	return out;
-}
-
-static const u16 rtl8225bcd_rxgain[] = {
-	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
-	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
-	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
-	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
-	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
-	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
-	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
-	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
-	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
-	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
-	0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
-	0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
-};
-
-static const u8 rtl8225_agc[] = {
-	0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
-	0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
-	0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
-	0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
-	0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
-	0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
-	0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
-	0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
-	0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
-	0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
-	0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
-	0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
-	0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
-};
-
-static const u8 rtl8225_gain[] = {
-	0x23, 0x88, 0x7c, 0xa5, /* -82dbm */
-	0x23, 0x88, 0x7c, 0xb5, /* -82dbm */
-	0x23, 0x88, 0x7c, 0xc5, /* -82dbm */
-	0x33, 0x80, 0x79, 0xc5, /* -78dbm */
-	0x43, 0x78, 0x76, 0xc5, /* -74dbm */
-	0x53, 0x60, 0x73, 0xc5, /* -70dbm */
-	0x63, 0x58, 0x70, 0xc5, /* -66dbm */
-};
-
-static const u8 rtl8225_threshold[] = {
-	0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
-};
-
-static const u8 rtl8225_tx_gain_cck_ofdm[] = {
-	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
-};
-
-static const u8 rtl8225_tx_power_cck[] = {
-	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
-	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
-	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
-	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
-	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
-	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
-};
-
-static const u8 rtl8225_tx_power_cck_ch14[] = {
-	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
-	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
-	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
-	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
-	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
-	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225_tx_power_ofdm[] = {
-	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
-};
-
-static const u32 rtl8225_chan[] = {
-	0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
-	0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
-};
-
-static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 cck_power, ofdm_power;
-	const u8 *tmp;
-	u32 reg;
-	int i;
-
-	cck_power = priv->channels[channel - 1].hw_value & 0xFF;
-	ofdm_power = priv->channels[channel - 1].hw_value >> 8;
-
-	cck_power = min(cck_power, (u8)35);
-	ofdm_power = min(ofdm_power, (u8)35);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
-			 rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
-
-	if (channel == 14)
-		tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
-	else
-		tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
-
-	for (i = 0; i < 8; i++)
-		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
-
-	msleep(1); /* FIXME: optional? */
-
-	/* TODO: use set_anaparam2 dev.c_func*/
-	/* anaparam2 on */
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
-			 rtl8225_tx_gain_cck_ofdm[ofdm_power/6] >> 1);
-
-	tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
-
-	rtl8225_write_phy_ofdm(dev, 5, *tmp);
-	rtl8225_write_phy_ofdm(dev, 7, *tmp);
-
-	msleep(1);
-}
-
-static void rtl8225_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i;
-
-	rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON);
-
-	/* host_pci_init */
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
-	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	msleep(200);	/* FIXME: ehh?? */
-	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6));
-
-	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
-
-	/* TODO: check if we need really to change BRSR to do RF config */
-	rtl818x_ioread16(priv, &priv->map->BRSR);
-	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
-	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	rtl8225_write(dev, 0x0, 0x067);
-	rtl8225_write(dev, 0x1, 0xFE0);
-	rtl8225_write(dev, 0x2, 0x44D);
-	rtl8225_write(dev, 0x3, 0x441);
-	rtl8225_write(dev, 0x4, 0x8BE);
-	rtl8225_write(dev, 0x5, 0xBF0);		/* TODO: minipci */
-	rtl8225_write(dev, 0x6, 0xAE6);
-	rtl8225_write(dev, 0x7, rtl8225_chan[0]);
-	rtl8225_write(dev, 0x8, 0x01F);
-	rtl8225_write(dev, 0x9, 0x334);
-	rtl8225_write(dev, 0xA, 0xFD4);
-	rtl8225_write(dev, 0xB, 0x391);
-	rtl8225_write(dev, 0xC, 0x050);
-	rtl8225_write(dev, 0xD, 0x6DB);
-	rtl8225_write(dev, 0xE, 0x029);
-	rtl8225_write(dev, 0xF, 0x914); msleep(1);
-
-	rtl8225_write(dev, 0x2, 0xC4D); msleep(100);
-
-	rtl8225_write(dev, 0x0, 0x127);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
-		rtl8225_write(dev, 0x1, i + 1);
-		rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
-	}
-
-	rtl8225_write(dev, 0x0, 0x027);
-	rtl8225_write(dev, 0x0, 0x22F);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
-		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
-		msleep(1);
-		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
-		msleep(1);
-	}
-
-	msleep(1);
-
-	rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x06, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x08, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x11, 0x03); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
-
-	rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
-	rtl8225_write_phy_cck(dev, 0x19, 0x00);
-	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
-	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
-	rtl8225_write_phy_cck(dev, 0x40, 0x86);
-	rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x44, 0x1f); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x45, 0x1e); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x46, 0x1a); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x47, 0x15); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x48, 0x10); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x49, 0x0a); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x4a, 0x05); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x4b, 0x02); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
-
-	rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D); msleep(1);
-
-	rtl8225_rf_set_tx_power(dev, 1);
-
-	/* RX antenna default to A */
-	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);	/* B: 0xDB */
-	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);	/* B: 0x10 */
-
-	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
-	msleep(1);
-	rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-
-	rtl8225_write(dev, 0x0c, 0x50);
-	/* set OFDM initial gain */
-	rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[4 * 4]);
-	rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[4 * 4 + 1]);
-	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[4 * 4 + 2]);
-	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[4 * 4 + 3]);
-	/* set CCK threshold */
-	rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[0]);
-}
-
-static const u8 rtl8225z2_tx_power_cck_ch14[] = {
-	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225z2_tx_power_cck_B[] = {
-	0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04
-};
-
-static const u8 rtl8225z2_tx_power_cck_A[] = {
-	0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04
-};
-
-static const u8 rtl8225z2_tx_power_cck[] = {
-	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
-};
-
-static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 cck_power, ofdm_power;
-	const u8 *tmp;
-	int i;
-
-	cck_power = priv->channels[channel - 1].hw_value & 0xFF;
-	ofdm_power = priv->channels[channel - 1].hw_value >> 8;
-
-	if (channel == 14)
-		tmp = rtl8225z2_tx_power_cck_ch14;
-	else if (cck_power == 12)
-		tmp = rtl8225z2_tx_power_cck_B;
-	else if (cck_power == 13)
-		tmp = rtl8225z2_tx_power_cck_A;
-	else
-		tmp = rtl8225z2_tx_power_cck;
-
-	for (i = 0; i < 8; i++)
-		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
-
-	cck_power = min(cck_power, (u8)35);
-	if (cck_power == 13 || cck_power == 14)
-		cck_power = 12;
-	if (cck_power >= 15)
-		cck_power -= 2;
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, cck_power);
-	rtl818x_ioread8(priv, &priv->map->TX_GAIN_CCK);
-	msleep(1);
-
-	ofdm_power = min(ofdm_power, (u8)35);
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, ofdm_power);
-
-	rtl8225_write_phy_ofdm(dev, 2, 0x62);
-	rtl8225_write_phy_ofdm(dev, 5, 0x00);
-	rtl8225_write_phy_ofdm(dev, 6, 0x40);
-	rtl8225_write_phy_ofdm(dev, 7, 0x00);
-	rtl8225_write_phy_ofdm(dev, 8, 0x40);
-
-	msleep(1);
-}
-
-static const u16 rtl8225z2_rxgain[] = {
-	0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0008, 0x0009,
-	0x000a, 0x000b, 0x0102, 0x0103, 0x0104, 0x0105, 0x0140, 0x0141,
-	0x0142, 0x0143, 0x0144, 0x0145, 0x0180, 0x0181, 0x0182, 0x0183,
-	0x0184, 0x0185, 0x0188, 0x0189, 0x018a, 0x018b, 0x0243, 0x0244,
-	0x0245, 0x0280, 0x0281, 0x0282, 0x0283, 0x0284, 0x0285, 0x0288,
-	0x0289, 0x028a, 0x028b, 0x028c, 0x0342, 0x0343, 0x0344, 0x0345,
-	0x0380, 0x0381, 0x0382, 0x0383, 0x0384, 0x0385, 0x0388, 0x0389,
-	0x038a, 0x038b, 0x038c, 0x038d, 0x0390, 0x0391, 0x0392, 0x0393,
-	0x0394, 0x0395, 0x0398, 0x0399, 0x039a, 0x039b, 0x039c, 0x039d,
-	0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9,
-	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
-	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
-};
-
-static void rtl8225z2_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i;
-
-	rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON);
-
-	/* host_pci_init */
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
-	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	msleep(200);	/* FIXME: ehh?? */
-	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6));
-
-	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00088008);
-
-	/* TODO: check if we need really to change BRSR to do RF config */
-	rtl818x_ioread16(priv, &priv->map->BRSR);
-	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
-	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-
-	rtl8225_write(dev, 0x0, 0x0B7); msleep(1);
-	rtl8225_write(dev, 0x1, 0xEE0); msleep(1);
-	rtl8225_write(dev, 0x2, 0x44D); msleep(1);
-	rtl8225_write(dev, 0x3, 0x441); msleep(1);
-	rtl8225_write(dev, 0x4, 0x8C3); msleep(1);
-	rtl8225_write(dev, 0x5, 0xC72); msleep(1);
-	rtl8225_write(dev, 0x6, 0x0E6); msleep(1);
-	rtl8225_write(dev, 0x7, 0x82A); msleep(1);
-	rtl8225_write(dev, 0x8, 0x03F); msleep(1);
-	rtl8225_write(dev, 0x9, 0x335); msleep(1);
-	rtl8225_write(dev, 0xa, 0x9D4); msleep(1);
-	rtl8225_write(dev, 0xb, 0x7BB); msleep(1);
-	rtl8225_write(dev, 0xc, 0x850); msleep(1);
-	rtl8225_write(dev, 0xd, 0xCDF); msleep(1);
-	rtl8225_write(dev, 0xe, 0x02B); msleep(1);
-	rtl8225_write(dev, 0xf, 0x114); msleep(100);
-
-	if (!(rtl8225_read(dev, 6) & (1 << 7))) {
-		rtl8225_write(dev, 0x02, 0x0C4D);
-		msleep(200);
-		rtl8225_write(dev, 0x02, 0x044D);
-		msleep(100);
-		/* TODO: readd calibration failure message when the calibration
-		   check works */
-	}
-
-	rtl8225_write(dev, 0x0, 0x1B7);
-	rtl8225_write(dev, 0x3, 0x002);
-	rtl8225_write(dev, 0x5, 0x004);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
-		rtl8225_write(dev, 0x1, i + 1);
-		rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
-	}
-
-	rtl8225_write(dev, 0x0, 0x0B7); msleep(100);
-	rtl8225_write(dev, 0x2, 0xC4D);
-
-	msleep(200);
-	rtl8225_write(dev, 0x2, 0x44D);
-	msleep(100);
-
-	rtl8225_write(dev, 0x00, 0x2BF);
-	rtl8225_write(dev, 0xFF, 0xFFFF);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
-		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
-		msleep(1);
-		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
-		msleep(1);
-	}
-
-	msleep(1);
-
-	rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
-	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x11, 0x06); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1b, 0x11); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1e, 0xb3); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x23, 0x80); msleep(1); /* FIXME: not needed? */
-	rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
-	rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
-
-	rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
-	rtl8225_write_phy_cck(dev, 0x19, 0x00);
-	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
-	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
-	rtl8225_write_phy_cck(dev, 0x40, 0x86);
-	rtl8225_write_phy_cck(dev, 0x41, 0x8a); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x44, 0x36); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x45, 0x35); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x46, 0x2e); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x47, 0x25); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x48, 0x1c); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x49, 0x12); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x4a, 0x09); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x4b, 0x04); msleep(1);
-	rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
-
-	rtl818x_iowrite8(priv, (u8 __iomem *)((void __iomem *)priv->map + 0x5B), 0x0D); msleep(1);
-
-	rtl8225z2_rf_set_tx_power(dev, 1);
-
-	/* RX antenna default to A */
-	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);	/* B: 0xDB */
-	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);	/* B: 0x10 */
-
-	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
-	msleep(1);
-	rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-}
-
-static void rtl8225_rf_stop(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 reg;
-
-	rtl8225_write(dev, 0x4, 0x1f); msleep(1);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-}
-
-static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
-				   struct ieee80211_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int chan =
-		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
-
-	if (priv->rf->init == rtl8225_rf_init)
-		rtl8225_rf_set_tx_power(dev, chan);
-	else
-		rtl8225z2_rf_set_tx_power(dev, chan);
-
-	rtl8225_write(dev, 0x7, rtl8225_chan[chan - 1]);
-	msleep(10);
-}
-
-static const struct rtl818x_rf_ops rtl8225_ops = {
-	.name		= "rtl8225",
-	.init		= rtl8225_rf_init,
-	.stop		= rtl8225_rf_stop,
-	.set_chan	= rtl8225_rf_set_channel,
-};
-
-static const struct rtl818x_rf_ops rtl8225z2_ops = {
-	.name		= "rtl8225z2",
-	.init		= rtl8225z2_rf_init,
-	.stop		= rtl8225_rf_stop,
-	.set_chan	= rtl8225_rf_set_channel,
-};
-
-const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u16 reg8, reg9;
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	msleep(100);
-
-	rtl8225_write(dev, 0, 0x1B7);
-
-	reg8 = rtl8225_read(dev, 8);
-	reg9 = rtl8225_read(dev, 9);
-
-	rtl8225_write(dev, 0, 0x0B7);
-
-	if (reg8 != 0x588 || reg9 != 0x700)
-		return &rtl8225_ops;
-
-	return &rtl8225z2_ops;
-}
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.h
deleted file mode 100644
index 310013a2d..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef RTL8180_RTL8225_H
-#define RTL8180_RTL8225_H
-
-#define RTL8225_ANAPARAM_ON	0xa0000b59
-#define RTL8225_ANAPARAM2_ON	0x860dec11
-#define RTL8225_ANAPARAM_OFF	0xa00beb59
-#define RTL8225_ANAPARAM2_OFF	0x840dec11
-
-const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *);
-
-static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
-					  u8 addr, u8 data)
-{
-	rtl8180_write_phy(dev, addr, data);
-}
-
-static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
-					 u8 addr, u8 data)
-{
-	rtl8180_write_phy(dev, addr, data | 0x10000);
-}
-
-#endif /* RTL8180_RTL8225_H */
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c
deleted file mode 100644
index fde89866f..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c
+++ /dev/null
@@ -1,475 +0,0 @@
-
-/* Radio tuning for RTL8225 on RTL8187SE
- *
- * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
- * Copyright 2014 Andrea Merello <andrea.merello@gmail.com>
- *
- * Based on the r8180 and Realtek r8187se drivers, which are:
- * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
- *
- * Also based on the rtl8187 driver, which is:
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <net/mac80211.h>
-
-#include "rtl8180.h"
-#include "rtl8225se.h"
-
-#define PFX "rtl8225 (se) "
-
-static const u32 RF_GAIN_TABLE[] = {
-	0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
-	0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
-	0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
-	0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
-	0x0183, 0x0163, 0x0143, 0x0123, 0x0103
-};
-
-static const u8 cck_ofdm_gain_settings[] = {
-	0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
-	0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
-	0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
-	0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
-	0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
-};
-
-static const u8 rtl8225se_tx_gain_cck_ofdm[] = {
-	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
-};
-
-static const u8 rtl8225se_tx_power_cck[] = {
-	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
-	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
-	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
-	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
-	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
-	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
-};
-
-static const u8 rtl8225se_tx_power_cck_ch14[] = {
-	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
-	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
-	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
-	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
-	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
-	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225se_tx_power_ofdm[] = {
-	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
-};
-
-static const u32 rtl8225se_chan[] = {
-	0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380,
-	0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A,
-};
-
-static const u8 rtl8225sez2_tx_power_cck_ch14[] = {
-	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225sez2_tx_power_cck_B[] = {
-	0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04
-};
-
-static const u8 rtl8225sez2_tx_power_cck_A[] = {
-	0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04
-};
-
-static const u8 rtl8225sez2_tx_power_cck[] = {
-	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
-};
-
-static const u8 ZEBRA_AGC[] = {
-	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A,
-	0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
-	0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A,
-	0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
-	0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27,
-	0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
-	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
-	0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
-	0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b,
-	0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
-	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21,
-	0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
-	0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
-	0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
-};
-
-static const u8 OFDM_CONFIG[] = {
-	0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
-	0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
-	0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
-	0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
-	0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
-	0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
-	0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
-	0xD8, 0x3C, 0x7B, 0x10, 0x10
-};
-
-static void rtl8187se_three_wire_io(struct ieee80211_hw *dev, u8 *data,
-				    u8 len, bool write)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i;
-	u8 tmp;
-
-	do {
-		for (i = 0; i < 5; i++) {
-			tmp = rtl818x_ioread8(priv, SW_3W_CMD1);
-			if (!(tmp & 0x3))
-				break;
-			udelay(10);
-		}
-		if (i == 5)
-			wiphy_err(dev->wiphy, PFX
-				"CmdReg: 0x%x RE/WE bits aren't clear\n", tmp);
-
-		tmp = rtl818x_ioread8(priv, &priv->map->rf_sw_config) | 0x02;
-		rtl818x_iowrite8(priv, &priv->map->rf_sw_config, tmp);
-
-		tmp = rtl818x_ioread8(priv, REG_ADDR1(0x84)) & 0xF7;
-		rtl818x_iowrite8(priv, REG_ADDR1(0x84), tmp);
-		if (write) {
-			if (len == 16) {
-				rtl818x_iowrite16(priv, SW_3W_DB0,
-				  *(u16 *)data);
-			} else if (len == 64) {
-				rtl818x_iowrite32(priv, SW_3W_DB0_4,
-				  *((u32 *)data));
-				rtl818x_iowrite32(priv, SW_3W_DB1_4,
-				  *((u32 *)(data + 4)));
-			} else
-				wiphy_err(dev->wiphy, PFX
-					"Unimplemented length\n");
-		} else {
-			rtl818x_iowrite16(priv, SW_3W_DB0, *(u16 *)data);
-		}
-		if (write)
-			tmp = 2;
-		else
-			tmp = 1;
-		rtl818x_iowrite8(priv, SW_3W_CMD1, tmp);
-		for (i = 0; i < 5; i++) {
-			tmp = rtl818x_ioread8(priv, SW_3W_CMD1);
-			if (!(tmp & 0x3))
-				break;
-			udelay(10);
-		}
-		rtl818x_iowrite8(priv, SW_3W_CMD1, 0);
-		if (!write) {
-			*((u16 *)data) = rtl818x_ioread16(priv, SI_DATA_REG);
-			*((u16 *)data) &= 0x0FFF;
-		}
-	} while (0);
-}
-
-static u32 rtl8187se_rf_readreg(struct ieee80211_hw *dev, u8 addr)
-{
-	u32 dataread = addr & 0x0F;
-	rtl8187se_three_wire_io(dev, (u8 *)&dataread, 16, 0);
-	return dataread;
-}
-
-static void rtl8187se_rf_writereg(struct ieee80211_hw *dev, u8 addr, u32 data)
-{
-	u32 outdata = (data << 4) | (u32)(addr & 0x0F);
-	rtl8187se_three_wire_io(dev, (u8 *)&outdata, 16, 1);
-}
-
-
-static void rtl8225se_write_zebra_agc(struct ieee80211_hw *dev)
-{
-	int i;
-
-	for (i = 0; i < 128; i++) {
-		rtl8225se_write_phy_ofdm(dev, 0xF, ZEBRA_AGC[i]);
-		rtl8225se_write_phy_ofdm(dev, 0xE, i+0x80);
-		rtl8225se_write_phy_ofdm(dev, 0xE, 0);
-	}
-}
-
-static void rtl8187se_write_ofdm_config(struct ieee80211_hw *dev)
-{
-	/* write OFDM_CONFIG table */
-	int i;
-
-	for (i = 0; i < 60; i++)
-		rtl8225se_write_phy_ofdm(dev, i, OFDM_CONFIG[i]);
-
-}
-
-static void rtl8225sez2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 cck_power, ofdm_power;
-
-	cck_power = priv->channels[channel - 1].hw_value & 0xFF;
-	if (cck_power > 35)
-		cck_power = 35;
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
-			 cck_ofdm_gain_settings[cck_power]);
-
-	usleep_range(1000, 5000);
-	ofdm_power = priv->channels[channel - 1].hw_value >> 8;
-	if (ofdm_power > 35)
-		ofdm_power = 35;
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
-			 cck_ofdm_gain_settings[ofdm_power]);
-	if (ofdm_power < 12) {
-		rtl8225se_write_phy_ofdm(dev, 7, 0x5C);
-		rtl8225se_write_phy_ofdm(dev, 9, 0x5C);
-	}
-	if (ofdm_power < 18) {
-		rtl8225se_write_phy_ofdm(dev, 7, 0x54);
-		rtl8225se_write_phy_ofdm(dev, 9, 0x54);
-	} else {
-		rtl8225se_write_phy_ofdm(dev, 7, 0x50);
-		rtl8225se_write_phy_ofdm(dev, 9, 0x50);
-	}
-
-	usleep_range(1000, 5000);
-}
-
-static void rtl8187se_write_rf_gain(struct ieee80211_hw *dev)
-{
-	int i;
-
-	for (i = 0; i <= 36; i++) {
-		rtl8187se_rf_writereg(dev, 0x01, i); mdelay(1);
-		rtl8187se_rf_writereg(dev, 0x02, RF_GAIN_TABLE[i]); mdelay(1);
-	}
-}
-
-static void rtl8187se_write_initial_gain(struct ieee80211_hw *dev,
-					int init_gain)
-{
-	switch (init_gain) {
-	default:
-		rtl8225se_write_phy_ofdm(dev, 0x17, 0x26); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1);
-		break;
-	case 2:
-		rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1);
-		break;
-	case 3:
-		rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
-		break;
-	case 4:
-		rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
-		break;
-	case 5:
-		rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
-		break;
-	case 6:
-		rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
-		break;
-	case 7:
-		rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x24, 0xA6); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
-		break;
-	case 8:
-		rtl8225se_write_phy_ofdm(dev, 0x17, 0x66); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x24, 0xB6); mdelay(1);
-		rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
-		break;
-	}
-}
-
-void rtl8225se_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u32 rf23, rf24;
-	u8 d_cut = 0;
-	u8 tmp;
-
-	/* Page 1 */
-	rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1);
-	rf23 = rtl8187se_rf_readreg(dev, 0x08); mdelay(1);
-	rf24 = rtl8187se_rf_readreg(dev, 0x09); mdelay(1);
-	if (rf23 == 0x0818 && rf24 == 0x070C)
-		d_cut = 1;
-
-	wiphy_info(dev->wiphy, "RTL8225-SE version %s\n",
-		d_cut ? "D" : "not-D");
-
-	/* Page 0: reg 0 - 15 */
-	rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x01, 0x06E0); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x03, 0x07F1); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x05, 0x0C72); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x06, 0x0AE6); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x07, 0x00CA); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x08, 0x0E1C); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x09, 0x02F0); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0A, 0x09D0); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0B, 0x01BA); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0C, 0x0640); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0E, 0x0020); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0F, 0x0990); mdelay(1);
-	/* page 1: reg 16-30 */
-	rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x03, 0x0806); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x04, 0x03A7); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x05, 0x059B); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x06, 0x0081); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x07, 0x01A0); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0B, 0x0418); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0C, 0x0FBE); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(1);
-	if (d_cut)
-		rtl8187se_rf_writereg(dev, 0x0E, 0x0807);
-	else
-		rtl8187se_rf_writereg(dev, 0x0E, 0x0806);
-	mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x00, 0x01D7); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x03, 0x0E00); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x04, 0x0E50); mdelay(1);
-
-	rtl8187se_write_rf_gain(dev);
-
-	rtl8187se_rf_writereg(dev, 0x05, 0x0203); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x06, 0x0200); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11);
-	rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(11);
-	rtl8187se_rf_writereg(dev, 0x00, 0x0037); mdelay(11);
-	rtl8187se_rf_writereg(dev, 0x04, 0x0160); mdelay(11);
-	rtl8187se_rf_writereg(dev, 0x07, 0x0080); mdelay(11);
-	rtl8187se_rf_writereg(dev, 0x02, 0x088D); mdelay(221);
-	rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11);
-	rtl8187se_rf_writereg(dev, 0x07, 0x0000); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x07, 0x0180); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x07, 0x0220); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x07, 0x03E0); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x06, 0x00C1); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1);
-	if (priv->xtal_cal) {
-		tmp = (priv->xtal_in << 4) | (priv->xtal_out << 1) |
-		      (1 << 11) | (1 << 9);
-		rtl8187se_rf_writereg(dev, 0x0F, tmp);
-		wiphy_info(dev->wiphy, "Xtal cal\n");
-		mdelay(1);
-	} else {
-		wiphy_info(dev->wiphy, "NO Xtal cal\n");
-		rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC);
-		mdelay(1);
-	}
-	/* page 0 */
-	rtl8187se_rf_writereg(dev, 0x00, 0x00BF); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(31);
-	rtl8187se_rf_writereg(dev, 0x00, 0x0197); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x05, 0x05AB); mdelay(1);
-
-	rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x01, 0x0000); mdelay(1);
-	rtl8187se_rf_writereg(dev, 0x02, 0x0000); mdelay(1);
-	/* power save parameters */
-	/* TODO: move to dev.c */
-	rtl818x_iowrite8(priv, REG_ADDR1(0x024E),
-		 rtl818x_ioread8(priv, REG_ADDR1(0x24E)) & 0x9F);
-	rtl8225se_write_phy_cck(dev, 0x00, 0xC8);
-	rtl8225se_write_phy_cck(dev, 0x06, 0x1C);
-	rtl8225se_write_phy_cck(dev, 0x10, 0x78);
-	rtl8225se_write_phy_cck(dev, 0x2E, 0xD0);
-	rtl8225se_write_phy_cck(dev, 0x2F, 0x06);
-	rtl8225se_write_phy_cck(dev, 0x01, 0x46);
-
-	/* power control */
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x10);
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x1B);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
-	rtl8225se_write_phy_ofdm(dev, 0x00, 0x12);
-
-	rtl8225se_write_zebra_agc(dev);
-
-	rtl8225se_write_phy_ofdm(dev, 0x10, 0x00);
-
-	rtl8187se_write_ofdm_config(dev);
-
-	/* turn on RF */
-	rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500);
-	rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500);
-	/* turn on RF again */
-	rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500);
-	rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500);
-	/* turn on BB */
-	rtl8225se_write_phy_ofdm(dev, 0x10, 0x40);
-	rtl8225se_write_phy_ofdm(dev, 0x12, 0x40);
-
-	rtl8187se_write_initial_gain(dev, 4);
-}
-
-void rtl8225se_rf_stop(struct ieee80211_hw *dev)
-{
-	/* checked for 8187se */
-	struct rtl8180_priv *priv = dev->priv;
-
-	/* turn off BB RXIQ matrix to cut off rx signal */
-	rtl8225se_write_phy_ofdm(dev, 0x10, 0x00);
-	rtl8225se_write_phy_ofdm(dev, 0x12, 0x00);
-	/* turn off RF */
-	rtl8187se_rf_writereg(dev, 0x04, 0x0000);
-	rtl8187se_rf_writereg(dev, 0x00, 0x0000);
-
-	usleep_range(1000, 5000);
-	/* turn off A/D and D/A */
-	rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_OFF);
-	rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_OFF);
-}
-
-void rtl8225se_rf_set_channel(struct ieee80211_hw *dev,
-				   struct ieee80211_conf *conf)
-{
-	int chan =
-		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
-
-	rtl8225sez2_rf_set_tx_power(dev, chan);
-	rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]);
-	if ((rtl8187se_rf_readreg(dev, 0x7) & 0x0F80) !=
-		rtl8225se_chan[chan - 1])
-		rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]);
-	usleep_range(10000, 20000);
-}
-
-static const struct rtl818x_rf_ops rtl8225se_ops = {
-	.name		= "rtl8225-se",
-	.init		= rtl8225se_rf_init,
-	.stop		= rtl8225se_rf_stop,
-	.set_chan	= rtl8225se_rf_set_channel,
-};
-
-const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *dev)
-{
-	return &rtl8225se_ops;
-}
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h
deleted file mode 100644
index 229400264..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h
+++ /dev/null
@@ -1,61 +0,0 @@
-
-/* Definitions for RTL8187SE hardware
- *
- * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
- * Copyright 2014 Andrea Merello <andrea.merello@gmail.com>
- *
- * Based on the r8180 and Realtek r8187se drivers, which are:
- * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
- *
- * Also based on the rtl8187 driver, which is:
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef RTL8187SE_RTL8225_H
-#define RTL8187SE_RTL8225_H
-
-#define RTL8225SE_ANAPARAM_ON	0xb0054d00
-#define RTL8225SE_ANAPARAM2_ON	0x000004c6
-
-/* all off except PLL */
-#define RTL8225SE_ANAPARAM_OFF	0xb0054dec
-/* all on including PLL */
-#define RTL8225SE_ANAPARAM_OFF2	0xb0054dfc
-
-#define RTL8225SE_ANAPARAM2_OFF	0x00ff04c6
-
-#define RTL8225SE_ANAPARAM3	0x10
-
-enum rtl8187se_power_state {
-	RTL8187SE_POWER_ON,
-	RTL8187SE_POWER_OFF,
-	RTL8187SE_POWER_SLEEP
-};
-
-static inline void rtl8225se_write_phy_ofdm(struct ieee80211_hw *dev,
-					  u8 addr, u8 data)
-{
-	rtl8180_write_phy(dev, addr, data);
-}
-
-static inline void rtl8225se_write_phy_cck(struct ieee80211_hw *dev,
-					 u8 addr, u8 data)
-{
-	rtl8180_write_phy(dev, addr, data | 0x10000);
-}
-
-
-const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *);
-void rtl8225se_rf_stop(struct ieee80211_hw *dev);
-void rtl8225se_rf_set_channel(struct ieee80211_hw *dev,
-				     struct ieee80211_conf *conf);
-void rtl8225se_rf_conf_erp(struct ieee80211_hw *dev,
-				  struct ieee80211_bss_conf *info);
-void rtl8225se_rf_init(struct ieee80211_hw *dev);
-
-#endif /* RTL8187SE_RTL8225_H */
diff --git a/drivers/net/wireless/rtl818x/rtl8180/sa2400.c b/drivers/net/wireless/rtl818x/rtl8180/sa2400.c
deleted file mode 100644
index 959b04982..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/sa2400.c
+++ /dev/null
@@ -1,228 +0,0 @@
-
-/*
- * Radio tuning for Philips SA2400 on RTL8180
- *
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Code from the BSD driver and the rtl8181 project have been
- * very useful to understand certain things
- *
- * I want to thanks the Authors of such projects and the Ndiswrapper
- * project Authors.
- *
- * A special Big Thanks also is for all people who donated me cards,
- * making possible the creation of the original rtl8180 driver
- * from which this code is derived!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <net/mac80211.h>
-
-#include "rtl8180.h"
-#include "sa2400.h"
-
-static const u32 sa2400_chan[] = {
-	0x00096c, /* ch1 */
-	0x080970,
-	0x100974,
-	0x180978,
-	0x000980,
-	0x080984,
-	0x100988,
-	0x18098c,
-	0x000994,
-	0x080998,
-	0x10099c,
-	0x1809a0,
-	0x0009a8,
-	0x0009b4, /* ch 14 */
-};
-
-static void write_sa2400(struct ieee80211_hw *dev, u8 addr, u32 data)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u32 phy_config;
-
-	/* MAC will bang bits to the sa2400. sw 3-wire is NOT used */
-	phy_config = 0xb0000000;
-
-	phy_config |= ((u32)(addr & 0xf)) << 24;
-	phy_config |= data & 0xffffff;
-
-	rtl818x_iowrite32(priv,
-		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
-
-	msleep(3);
-}
-
-static void sa2400_write_phy_antenna(struct ieee80211_hw *dev, short chan)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 ant = SA2400_ANTENNA;
-
-	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
-		ant |= BB_ANTENNA_B;
-
-	if (chan == 14)
-		ant |= BB_ANTATTEN_CHAN14;
-
-	rtl8180_write_phy(dev, 0x10, ant);
-
-}
-
-static u8 sa2400_rf_rssi_map[] = {
-	0x64, 0x64, 0x63, 0x62, 0x61, 0x60, 0x5f, 0x5e,
-	0x5d, 0x5c, 0x5b, 0x5a, 0x57, 0x54, 0x52, 0x50,
-	0x4e, 0x4c, 0x4a, 0x48, 0x46, 0x44, 0x41, 0x3f,
-	0x3c, 0x3a, 0x37, 0x36, 0x36, 0x1c, 0x1c, 0x1b,
-	0x1b, 0x1a, 0x1a, 0x19, 0x19, 0x18, 0x18, 0x17,
-	0x17, 0x16, 0x16, 0x15, 0x15, 0x14, 0x14, 0x13,
-	0x13, 0x12, 0x12, 0x11, 0x11, 0x10, 0x10, 0x0f,
-	0x0f, 0x0e, 0x0e, 0x0d, 0x0d, 0x0c, 0x0c, 0x0b,
-	0x0b, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x07,
-	0x07, 0x06, 0x06, 0x05, 0x04, 0x03, 0x02,
-};
-
-static u8 sa2400_rf_calc_rssi(u8 agc, u8 sq)
-{
-	if (sq == 0x80)
-		return 1;
-
-	if (sq > 78)
-		return 32;
-
-	/* TODO: recalc sa2400_rf_rssi_map to avoid mult / div */
-	return 65 * sa2400_rf_rssi_map[sq] / 100;
-}
-
-static void sa2400_rf_set_channel(struct ieee80211_hw *dev,
-				  struct ieee80211_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int channel =
-		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
-	u32 txpw = priv->channels[channel - 1].hw_value & 0xFF;
-	u32 chan = sa2400_chan[channel - 1];
-
-	write_sa2400(dev, 7, txpw);
-
-	sa2400_write_phy_antenna(dev, channel);
-
-	write_sa2400(dev, 0, chan);
-	write_sa2400(dev, 1, 0xbb50);
-	write_sa2400(dev, 2, 0x80);
-	write_sa2400(dev, 3, 0);
-}
-
-static void sa2400_rf_stop(struct ieee80211_hw *dev)
-{
-	write_sa2400(dev, 4, 0);
-}
-
-static void sa2400_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u32 anaparam, txconf;
-	u8 firdac;
-	int analogphy = priv->rfparam & RF_PARAM_ANALOGPHY;
-
-	anaparam = priv->anaparam;
-	anaparam &= ~(1 << ANAPARAM_TXDACOFF_SHIFT);
-	anaparam &= ~ANAPARAM_PWR1_MASK;
-	anaparam &= ~ANAPARAM_PWR0_MASK;
-
-	if (analogphy) {
-		anaparam |= SA2400_ANA_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT;
-		firdac = 0;
-	} else {
-		anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT);
-		anaparam |= (SA2400_ANAPARAM_PWR0_ON << ANAPARAM_PWR0_SHIFT);
-		firdac = 1 << SA2400_REG4_FIRDAC_SHIFT;
-	}
-
-	rtl8180_set_anaparam(priv, anaparam);
-
-	write_sa2400(dev, 0, sa2400_chan[0]);
-	write_sa2400(dev, 1, 0xbb50);
-	write_sa2400(dev, 2, 0x80);
-	write_sa2400(dev, 3, 0);
-	write_sa2400(dev, 4, 0x19340 | firdac);
-	write_sa2400(dev, 5, 0x1dfb | (SA2400_MAX_SENS - 54) << 15);
-	write_sa2400(dev, 4, 0x19348 | firdac); /* calibrate VCO */
-
-	if (!analogphy)
-		write_sa2400(dev, 4, 0x1938c); /*???*/
-
-	write_sa2400(dev, 4, 0x19340 | firdac);
-
-	write_sa2400(dev, 0, sa2400_chan[0]);
-	write_sa2400(dev, 1, 0xbb50);
-	write_sa2400(dev, 2, 0x80);
-	write_sa2400(dev, 3, 0);
-	write_sa2400(dev, 4, 0x19344 | firdac); /* calibrate filter */
-
-	/* new from rtl8180 embedded driver (rtl8181 project) */
-	write_sa2400(dev, 6, 0x13ff | (1 << 23)); /* MANRX */
-	write_sa2400(dev, 8, 0); /* VCO */
-
-	if (analogphy) {
-		rtl8180_set_anaparam(priv, anaparam |
-				     (1 << ANAPARAM_TXDACOFF_SHIFT));
-
-		txconf = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-		rtl818x_iowrite32(priv, &priv->map->TX_CONF,
-			txconf | RTL818X_TX_CONF_LOOPBACK_CONT);
-
-		write_sa2400(dev, 4, 0x19341); /* calibrates DC */
-
-		/* a 5us sleep is required here,
-		 * we rely on the 3ms delay introduced in write_sa2400 */
-		write_sa2400(dev, 4, 0x19345);
-
-		/* a 20us sleep is required here,
-		 * we rely on the 3ms delay introduced in write_sa2400 */
-
-		rtl818x_iowrite32(priv, &priv->map->TX_CONF, txconf);
-
-		rtl8180_set_anaparam(priv, anaparam);
-	}
-	/* end new code */
-
-	write_sa2400(dev, 4, 0x19341 | firdac); /* RTX MODE */
-
-	/* baseband configuration */
-	rtl8180_write_phy(dev, 0, 0x98);
-	rtl8180_write_phy(dev, 3, 0x38);
-	rtl8180_write_phy(dev, 4, 0xe0);
-	rtl8180_write_phy(dev, 5, 0x90);
-	rtl8180_write_phy(dev, 6, 0x1a);
-	rtl8180_write_phy(dev, 7, 0x64);
-
-	sa2400_write_phy_antenna(dev, 1);
-
-	rtl8180_write_phy(dev, 0x11, 0x80);
-
-	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
-	    RTL818X_CONFIG2_ANTENNA_DIV)
-		rtl8180_write_phy(dev, 0x12, 0xc7); /* enable ant diversity */
-	else
-		rtl8180_write_phy(dev, 0x12, 0x47); /* disable ant diversity */
-
-	rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
-
-	rtl8180_write_phy(dev, 0x19, 0x0);
-	rtl8180_write_phy(dev, 0x1a, 0xa0);
-}
-
-const struct rtl818x_rf_ops sa2400_rf_ops = {
-	.name		= "Philips",
-	.init		= sa2400_rf_init,
-	.stop		= sa2400_rf_stop,
-	.set_chan	= sa2400_rf_set_channel,
-	.calc_rssi	= sa2400_rf_calc_rssi,
-};
diff --git a/drivers/net/wireless/rtl818x/rtl8180/sa2400.h b/drivers/net/wireless/rtl818x/rtl8180/sa2400.h
deleted file mode 100644
index fb0093f35..000000000
--- a/drivers/net/wireless/rtl818x/rtl8180/sa2400.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef RTL8180_SA2400_H
-#define RTL8180_SA2400_H
-
-/*
- * Radio tuning for Philips SA2400 on RTL8180
- *
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Code from the BSD driver and the rtl8181 project have been
- * very useful to understand certain things
- *
- * I want to thanks the Authors of such projects and the Ndiswrapper
- * project Authors.
- *
- * A special Big Thanks also is for all people who donated me cards,
- * making possible the creation of the original rtl8180 driver
- * from which this code is derived!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define SA2400_ANTENNA 0x91
-#define SA2400_DIG_ANAPARAM_PWR1_ON 0x8
-#define SA2400_ANA_ANAPARAM_PWR1_ON 0x28
-#define SA2400_ANAPARAM_PWR0_ON 0x3
-
-/* RX sensitivity in dbm */
-#define SA2400_MAX_SENS 85
-
-#define SA2400_REG4_FIRDAC_SHIFT 7
-
-extern const struct rtl818x_rf_ops sa2400_rf_ops;
-
-#endif /* RTL8180_SA2400_H */