summaryrefslogtreecommitdiff
path: root/drivers/phy/phy-ti-pipe3.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-09-08 01:01:14 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-09-08 01:01:14 -0300
commite5fd91f1ef340da553f7a79da9540c3db711c937 (patch)
treeb11842027dc6641da63f4bcc524f8678263304a3 /drivers/phy/phy-ti-pipe3.c
parent2a9b0348e685a63d97486f6749622b61e9e3292f (diff)
Linux-libre 4.2-gnu
Diffstat (limited to 'drivers/phy/phy-ti-pipe3.c')
-rw-r--r--drivers/phy/phy-ti-pipe3.c217
1 files changed, 88 insertions, 129 deletions
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 53f295c1b..08020dc2c 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -28,7 +28,8 @@
#include <linux/delay.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>
-#include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
@@ -53,6 +54,8 @@
#define PLL_LOCK 0x2
#define PLL_IDLE 0x1
+#define SATA_PLL_SOFT_RESET BIT(18)
+
/*
* This is an Empirical value that works, need to confirm the actual
* value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
@@ -83,10 +86,9 @@ struct ti_pipe3 {
struct clk *refclk;
struct clk *div_clk;
struct pipe3_dpll_map *dpll_map;
- bool enabled;
- spinlock_t lock; /* serialize clock enable/disable */
- /* the below flag is needed specifically for SATA */
- bool refclk_enabled;
+ struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */
+ unsigned int dpll_reset_reg; /* reg. index within syscon */
+ bool sata_refclk_enabled;
};
static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -137,6 +139,9 @@ static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
return NULL;
}
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
+static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
+
static int ti_pipe3_power_off(struct phy *x)
{
struct ti_pipe3 *phy = phy_get_drvdata(x);
@@ -217,6 +222,7 @@ static int ti_pipe3_init(struct phy *x)
u32 val;
int ret = 0;
+ ti_pipe3_enable_clocks(phy);
/*
* Set pcie_pcs register to 0x96 for proper functioning of phy
* as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
@@ -250,33 +256,46 @@ static int ti_pipe3_exit(struct phy *x)
u32 val;
unsigned long timeout;
- /* SATA DPLL can't be powered down due to Errata i783 and PCIe
- * does not have internal DPLL
+ /* If dpll_reset_syscon is not present we wont power down SATA DPLL
+ * due to Errata i783
*/
- if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") ||
- of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie"))
+ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") &&
+ !phy->dpll_reset_syscon)
return 0;
- /* Put DPLL in IDLE mode */
- val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
- val |= PLL_IDLE;
- ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+ /* PCIe doesn't have internal DPLL */
+ if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
+ /* Put DPLL in IDLE mode */
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val |= PLL_IDLE;
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
- /* wait for LDO and Oscillator to power down */
- timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
- do {
- cpu_relax();
- val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
- if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
- break;
- } while (!time_after(jiffies, timeout));
+ /* wait for LDO and Oscillator to power down */
+ timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
+ do {
+ cpu_relax();
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
+ break;
+ } while (!time_after(jiffies, timeout));
+
+ if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
+ dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
+ val);
+ return -EBUSY;
+ }
+ }
- if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
- dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
- val);
- return -EBUSY;
+ /* i783: SATA needs control bit toggle after PLL unlock */
+ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) {
+ regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
+ SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
+ regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
+ SATA_PLL_SOFT_RESET, 0);
}
+ ti_pipe3_disable_clocks(phy);
+
return 0;
}
static struct phy_ops ops = {
@@ -306,7 +325,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
return -ENOMEM;
phy->dev = &pdev->dev;
- spin_lock_init(&phy->lock);
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
match = of_match_device(ti_pipe3_id_table, &pdev->dev);
@@ -350,6 +368,21 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
} else {
phy->wkupclk = ERR_PTR(-ENODEV);
+ phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
+ "syscon-pllreset");
+ if (IS_ERR(phy->dpll_reset_syscon)) {
+ dev_info(&pdev->dev,
+ "can't get syscon-pllreset, sata dpll won't idle\n");
+ phy->dpll_reset_syscon = NULL;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-pllreset", 1,
+ &phy->dpll_reset_reg)) {
+ dev_err(&pdev->dev,
+ "couldn't get pllreset reg. offset\n");
+ return -EINVAL;
+ }
+ }
}
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
@@ -403,6 +436,16 @@ static int ti_pipe3_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, phy);
pm_runtime_enable(phy->dev);
+ /*
+ * Prevent auto-disable of refclk for SATA PHY due to Errata i783
+ */
+ if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+ if (!IS_ERR(phy->refclk)) {
+ clk_prepare_enable(phy->refclk);
+ phy->sata_refclk_enabled = true;
+ }
+ }
+
generic_phy = devm_phy_create(phy->dev, NULL, &ops);
if (IS_ERR(generic_phy))
return PTR_ERR(generic_phy);
@@ -413,63 +456,33 @@ static int ti_pipe3_probe(struct platform_device *pdev)
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
- pm_runtime_get(&pdev->dev);
-
return 0;
}
static int ti_pipe3_remove(struct platform_device *pdev)
{
- if (!pm_runtime_suspended(&pdev->dev))
- pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
-#ifdef CONFIG_PM
-static int ti_pipe3_enable_refclk(struct ti_pipe3 *phy)
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
{
- if (!IS_ERR(phy->refclk) && !phy->refclk_enabled) {
- int ret;
+ int ret = 0;
+ if (!IS_ERR(phy->refclk)) {
ret = clk_prepare_enable(phy->refclk);
if (ret) {
dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
return ret;
}
- phy->refclk_enabled = true;
}
- return 0;
-}
-
-static void ti_pipe3_disable_refclk(struct ti_pipe3 *phy)
-{
- if (!IS_ERR(phy->refclk))
- clk_disable_unprepare(phy->refclk);
-
- phy->refclk_enabled = false;
-}
-
-static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
-{
- int ret = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&phy->lock, flags);
- if (phy->enabled)
- goto err1;
-
- ret = ti_pipe3_enable_refclk(phy);
- if (ret)
- goto err1;
-
if (!IS_ERR(phy->wkupclk)) {
ret = clk_prepare_enable(phy->wkupclk);
if (ret) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
- goto err2;
+ goto disable_refclk;
}
}
@@ -477,96 +490,43 @@ static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
ret = clk_prepare_enable(phy->div_clk);
if (ret) {
dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
- goto err3;
+ goto disable_wkupclk;
}
}
- phy->enabled = true;
- spin_unlock_irqrestore(&phy->lock, flags);
return 0;
-err3:
+disable_wkupclk:
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
-err2:
+disable_refclk:
if (!IS_ERR(phy->refclk))
clk_disable_unprepare(phy->refclk);
- ti_pipe3_disable_refclk(phy);
-err1:
- spin_unlock_irqrestore(&phy->lock, flags);
return ret;
}
static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
{
- unsigned long flags;
-
- spin_lock_irqsave(&phy->lock, flags);
- if (!phy->enabled) {
- spin_unlock_irqrestore(&phy->lock, flags);
- return;
- }
-
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
- /* Don't disable refclk for SATA PHY due to Errata i783 */
- if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
- ti_pipe3_disable_refclk(phy);
+ if (!IS_ERR(phy->refclk)) {
+ clk_disable_unprepare(phy->refclk);
+ /*
+ * SATA refclk needs an additional disable as we left it
+ * on in probe to avoid Errata i783
+ */
+ if (phy->sata_refclk_enabled) {
+ clk_disable_unprepare(phy->refclk);
+ phy->sata_refclk_enabled = false;
+ }
+ }
+
if (!IS_ERR(phy->div_clk))
clk_disable_unprepare(phy->div_clk);
- phy->enabled = false;
- spin_unlock_irqrestore(&phy->lock, flags);
}
-static int ti_pipe3_runtime_suspend(struct device *dev)
-{
- struct ti_pipe3 *phy = dev_get_drvdata(dev);
-
- ti_pipe3_disable_clocks(phy);
- return 0;
-}
-
-static int ti_pipe3_runtime_resume(struct device *dev)
-{
- struct ti_pipe3 *phy = dev_get_drvdata(dev);
- int ret = 0;
-
- ret = ti_pipe3_enable_clocks(phy);
- return ret;
-}
-
-static int ti_pipe3_suspend(struct device *dev)
-{
- struct ti_pipe3 *phy = dev_get_drvdata(dev);
-
- ti_pipe3_disable_clocks(phy);
- return 0;
-}
-
-static int ti_pipe3_resume(struct device *dev)
-{
- struct ti_pipe3 *phy = dev_get_drvdata(dev);
- int ret;
-
- ret = ti_pipe3_enable_clocks(phy);
- if (ret)
- return ret;
-
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops ti_pipe3_pm_ops = {
- SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend,
- ti_pipe3_runtime_resume, NULL)
- SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
-};
-
static const struct of_device_id ti_pipe3_id_table[] = {
{
.compatible = "ti,phy-usb3",
@@ -592,7 +552,6 @@ static struct platform_driver ti_pipe3_driver = {
.remove = ti_pipe3_remove,
.driver = {
.name = "ti-pipe3",
- .pm = &ti_pipe3_pm_ops,
.of_match_table = ti_pipe3_id_table,
},
};