summaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc/lpfc_scsi.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-03-25 03:53:42 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-03-25 03:53:42 -0300
commit03dd4cb26d967f9588437b0fc9cc0e8353322bb7 (patch)
treefa581f6dc1c0596391690d1f67eceef3af8246dc /drivers/scsi/lpfc/lpfc_scsi.c
parentd4e493caf788ef44982e131ff9c786546904d934 (diff)
Linux-libre 4.5-gnu
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_scsi.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c41
1 files changed, 24 insertions, 17 deletions
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 4679ed444..152b3c8a5 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -3676,6 +3676,7 @@ static void
lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_iocbq *rsp_iocb)
{
+ struct lpfc_hba *phba = vport->phba;
struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
@@ -3685,6 +3686,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
uint32_t *lp;
uint32_t host_status = DID_OK;
uint32_t rsplen = 0;
+ uint32_t fcpDl;
uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
@@ -3755,13 +3757,14 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
fcprsp->rspInfo3);
scsi_set_resid(cmnd, 0);
+ fcpDl = be32_to_cpu(fcpcmd->fcpDl);
if (resp_info & RESID_UNDER) {
scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_UNDER,
"9025 FCP Read Underrun, expected %d, "
"residual %d Data: x%x x%x x%x\n",
- be32_to_cpu(fcpcmd->fcpDl),
+ fcpDl,
scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
cmnd->underflow);
@@ -3777,7 +3780,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
LOG_FCP | LOG_FCP_ERROR,
"9026 FCP Read Check Error "
"and Underrun Data: x%x x%x x%x x%x\n",
- be32_to_cpu(fcpcmd->fcpDl),
+ fcpDl,
scsi_get_resid(cmnd), fcpi_parm,
cmnd->cmnd[0]);
scsi_set_resid(cmnd, scsi_bufflen(cmnd));
@@ -3812,13 +3815,25 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
* Check SLI validation that all the transfer was actually done
* (fcpi_parm should be zero). Apply check only to reads.
*/
- } else if (fcpi_parm && (cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
+ } else if (fcpi_parm) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
- "9029 FCP Read Check Error Data: "
+ "9029 FCP %s Check Error xri x%x Data: "
"x%x x%x x%x x%x x%x\n",
- be32_to_cpu(fcpcmd->fcpDl),
- be32_to_cpu(fcprsp->rspResId),
+ ((cmnd->sc_data_direction == DMA_FROM_DEVICE) ?
+ "Read" : "Write"),
+ ((phba->sli_rev == LPFC_SLI_REV4) ?
+ lpfc_cmd->cur_iocbq.sli4_xritag :
+ rsp_iocb->iocb.ulpContext),
+ fcpDl, be32_to_cpu(fcprsp->rspResId),
fcpi_parm, cmnd->cmnd[0], scsi_status);
+
+ /* There is some issue with the LPe12000 that causes it
+ * to miscalculate the fcpi_parm and falsely trip this
+ * recovery logic. Detect this case and don't error when true.
+ */
+ if (fcpi_parm > fcpDl)
+ goto out;
+
switch (scsi_status) {
case SAM_STAT_GOOD:
case SAM_STAT_CHECK_CONDITION:
@@ -3908,9 +3923,9 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
uint32_t logit = LOG_FCP;
/* Sanity check on return of outstanding command */
- if (!(lpfc_cmd->pCmd))
- return;
cmd = lpfc_cmd->pCmd;
+ if (!cmd)
+ return;
shost = cmd->device->host;
lpfc_cmd->result = (pIocbOut->iocb.un.ulpWord[4] & IOERR_PARAM_MASK);
@@ -4446,15 +4461,7 @@ lpfc_info(struct Scsi_Host *host)
phba->Port);
}
len = strlen(lpfcinfobuf);
- if (phba->sli_rev <= LPFC_SLI_REV3) {
- link_speed = lpfc_sli_port_speed_get(phba);
- } else {
- if (phba->sli4_hba.link_state.logical_speed)
- link_speed =
- phba->sli4_hba.link_state.logical_speed;
- else
- link_speed = phba->sli4_hba.link_state.speed;
- }
+ link_speed = lpfc_sli_port_speed_get(phba);
if (link_speed != 0)
snprintf(lpfcinfobuf + len, 384-len,
" Logical Link Speed: %d Mbps", link_speed);