summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-09-08 01:01:14 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-09-08 01:01:14 -0300
commite5fd91f1ef340da553f7a79da9540c3db711c937 (patch)
treeb11842027dc6641da63f4bcc524f8678263304a3 /drivers/spi
parent2a9b0348e685a63d97486f6749622b61e9e3292f (diff)
Linux-libre 4.2-gnu
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig26
-rw-r--r--drivers/spi/Makefile3
-rw-r--r--drivers/spi/spi-ath79.c34
-rw-r--r--drivers/spi/spi-atmel.c292
-rw-r--r--drivers/spi/spi-bcm2835.c392
-rw-r--r--drivers/spi/spi-davinci.c2
-rw-r--r--drivers/spi/spi-fsl-dspi.c307
-rw-r--r--drivers/spi/spi-fsl-espi.c6
-rw-r--r--drivers/spi/spi-imx.c2
-rw-r--r--drivers/spi/spi-omap2-mcspi.c280
-rw-r--r--drivers/spi/spi-orion.c47
-rw-r--r--drivers/spi/spi-pxa2xx-pci.c8
-rw-r--r--drivers/spi/spi-pxa2xx-pxadma.c487
-rw-r--r--drivers/spi/spi-pxa2xx.c159
-rw-r--r--drivers/spi/spi-pxa2xx.h6
-rw-r--r--drivers/spi/spi-rb4xx.c210
-rw-r--r--drivers/spi/spi-rspi.c23
-rw-r--r--drivers/spi/spi-s3c64xx.c2
-rw-r--r--drivers/spi/spi-sh-msiof.c2
-rw-r--r--drivers/spi/spi-sirf.c877
-rw-r--r--drivers/spi/spi-zynqmp-gqspi.c1123
-rw-r--r--drivers/spi/spi.c34
-rw-r--r--drivers/spi/spidev.c34
23 files changed, 3185 insertions, 1171 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 72b059081..b0f30fb68 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -77,6 +77,7 @@ config SPI_ATMEL
config SPI_BCM2835
tristate "BCM2835 SPI controller"
+ depends on GPIOLIB
depends on ARCH_BCM2835 || COMPILE_TEST
depends on GPIOLIB
help
@@ -221,7 +222,7 @@ config SPI_FALCON
config SPI_GPIO
tristate "GPIO-based bitbanging SPI Master"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
select SPI_BITBANG
help
This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
@@ -327,7 +328,7 @@ config SPI_MESON_SPIFC
config SPI_OC_TINY
tristate "OpenCores tiny SPI"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
select SPI_BITBANG
help
This is the driver for OpenCores tiny SPI master controller.
@@ -394,16 +395,9 @@ config SPI_PPC4xx
help
This selects a driver for the PPC4xx SPI Controller.
-config SPI_PXA2XX_PXADMA
- bool "PXA2xx SSP legacy PXA DMA API support"
- depends on SPI_PXA2XX && ARCH_PXA
- help
- Enable PXA private legacy DMA API support. Note that this is
- deprecated in favor of generic DMA engine API.
-
config SPI_PXA2XX_DMA
def_bool y
- depends on SPI_PXA2XX && !SPI_PXA2XX_PXADMA
+ depends on SPI_PXA2XX
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
@@ -429,6 +423,12 @@ config SPI_ROCKCHIP
The main usecase of this controller is to use spi flash as boot
device.
+config SPI_RB4XX
+ tristate "Mikrotik RB4XX SPI master"
+ depends on SPI_MASTER && ATH79
+ help
+ SPI controller driver for the Mikrotik RB4xx series boards.
+
config SPI_RSPI
tristate "Renesas RSPI/QSPI controller"
depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
@@ -610,6 +610,12 @@ config SPI_XTENSA_XTFPGA
16 bit words in SPI mode 0, automatically asserting CS on transfer
start and deasserting on end.
+config SPI_ZYNQMP_GQSPI
+ tristate "Xilinx ZynqMP GQSPI controller"
+ depends on SPI_MASTER && HAS_DMA
+ help
+ Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
+
config SPI_NUC900
tristate "Nuvoton NUC900 series SPI"
depends on ARCH_W90X900
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index d8cbf6549..1154dbac8 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -60,12 +60,12 @@ obj-$(CONFIG_SPI_ORION) += spi-orion.o
obj-$(CONFIG_SPI_PL022) += spi-pl022.o
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
spi-pxa2xx-platform-objs := spi-pxa2xx.o
-spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_PXADMA) += spi-pxa2xx-pxadma.o
spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
@@ -89,3 +89,4 @@ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o
+obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index b02eb4ac0..bf1f9b32c 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -79,10 +79,8 @@ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
}
if (spi->chip_select) {
- struct ath79_spi_controller_data *cdata = spi->controller_data;
-
/* SPI is normally active-low */
- gpio_set_value(cdata->gpio, cs_high);
+ gpio_set_value(spi->cs_gpio, cs_high);
} else {
if (cs_high)
sp->ioc_base |= AR71XX_SPI_IOC_CS0;
@@ -117,11 +115,10 @@ static void ath79_spi_disable(struct ath79_spi *sp)
static int ath79_spi_setup_cs(struct spi_device *spi)
{
- struct ath79_spi_controller_data *cdata;
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
int status;
- cdata = spi->controller_data;
- if (spi->chip_select && !cdata)
+ if (spi->chip_select && !gpio_is_valid(spi->cs_gpio))
return -EINVAL;
status = 0;
@@ -134,8 +131,15 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
else
flags |= GPIOF_INIT_HIGH;
- status = gpio_request_one(cdata->gpio, flags,
+ status = gpio_request_one(spi->cs_gpio, flags,
dev_name(&spi->dev));
+ } else {
+ if (spi->mode & SPI_CS_HIGH)
+ sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+ else
+ sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
}
return status;
@@ -144,8 +148,7 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
static void ath79_spi_cleanup_cs(struct spi_device *spi)
{
if (spi->chip_select) {
- struct ath79_spi_controller_data *cdata = spi->controller_data;
- gpio_free(cdata->gpio);
+ gpio_free(spi->cs_gpio);
}
}
@@ -217,6 +220,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
}
sp = spi_master_get_devdata(master);
+ master->dev.of_node = pdev->dev.of_node;
platform_set_drvdata(pdev, sp);
pdata = dev_get_platdata(&pdev->dev);
@@ -253,7 +257,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
goto err_put_master;
}
- ret = clk_enable(sp->clk);
+ ret = clk_prepare_enable(sp->clk);
if (ret)
goto err_put_master;
@@ -277,7 +281,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
err_disable:
ath79_spi_disable(sp);
err_clk_disable:
- clk_disable(sp->clk);
+ clk_disable_unprepare(sp->clk);
err_put_master:
spi_master_put(sp->bitbang.master);
@@ -290,7 +294,7 @@ static int ath79_spi_remove(struct platform_device *pdev)
spi_bitbang_stop(&sp->bitbang);
ath79_spi_disable(sp);
- clk_disable(sp->clk);
+ clk_disable_unprepare(sp->clk);
spi_master_put(sp->bitbang.master);
return 0;
@@ -301,12 +305,18 @@ static void ath79_spi_shutdown(struct platform_device *pdev)
ath79_spi_remove(pdev);
}
+static const struct of_device_id ath79_spi_of_match[] = {
+ { .compatible = "qca,ar7100-spi", },
+ { },
+};
+
static struct platform_driver ath79_spi_driver = {
.probe = ath79_spi_probe,
.remove = ath79_spi_remove,
.shutdown = ath79_spi_shutdown,
.driver = {
.name = DRV_NAME,
+ .of_match_table = ath79_spi_of_match,
},
};
module_platform_driver(ath79_spi_driver);
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index a2f40b1b2..c9eca3477 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -41,6 +41,8 @@
#define SPI_CSR1 0x0034
#define SPI_CSR2 0x0038
#define SPI_CSR3 0x003c
+#define SPI_FMR 0x0040
+#define SPI_FLR 0x0044
#define SPI_VERSION 0x00fc
#define SPI_RPR 0x0100
#define SPI_RCR 0x0104
@@ -62,6 +64,14 @@
#define SPI_SWRST_SIZE 1
#define SPI_LASTXFER_OFFSET 24
#define SPI_LASTXFER_SIZE 1
+#define SPI_TXFCLR_OFFSET 16
+#define SPI_TXFCLR_SIZE 1
+#define SPI_RXFCLR_OFFSET 17
+#define SPI_RXFCLR_SIZE 1
+#define SPI_FIFOEN_OFFSET 30
+#define SPI_FIFOEN_SIZE 1
+#define SPI_FIFODIS_OFFSET 31
+#define SPI_FIFODIS_SIZE 1
/* Bitfields in MR */
#define SPI_MSTR_OFFSET 0
@@ -114,6 +124,22 @@
#define SPI_TXEMPTY_SIZE 1
#define SPI_SPIENS_OFFSET 16
#define SPI_SPIENS_SIZE 1
+#define SPI_TXFEF_OFFSET 24
+#define SPI_TXFEF_SIZE 1
+#define SPI_TXFFF_OFFSET 25
+#define SPI_TXFFF_SIZE 1
+#define SPI_TXFTHF_OFFSET 26
+#define SPI_TXFTHF_SIZE 1
+#define SPI_RXFEF_OFFSET 27
+#define SPI_RXFEF_SIZE 1
+#define SPI_RXFFF_OFFSET 28
+#define SPI_RXFFF_SIZE 1
+#define SPI_RXFTHF_OFFSET 29
+#define SPI_RXFTHF_SIZE 1
+#define SPI_TXFPTEF_OFFSET 30
+#define SPI_TXFPTEF_SIZE 1
+#define SPI_RXFPTEF_OFFSET 31
+#define SPI_RXFPTEF_SIZE 1
/* Bitfields in CSR0 */
#define SPI_CPOL_OFFSET 0
@@ -157,6 +183,22 @@
#define SPI_TXTDIS_OFFSET 9
#define SPI_TXTDIS_SIZE 1
+/* Bitfields in FMR */
+#define SPI_TXRDYM_OFFSET 0
+#define SPI_TXRDYM_SIZE 2
+#define SPI_RXRDYM_OFFSET 4
+#define SPI_RXRDYM_SIZE 2
+#define SPI_TXFTHRES_OFFSET 16
+#define SPI_TXFTHRES_SIZE 6
+#define SPI_RXFTHRES_OFFSET 24
+#define SPI_RXFTHRES_SIZE 6
+
+/* Bitfields in FLR */
+#define SPI_TXFL_OFFSET 0
+#define SPI_TXFL_SIZE 6
+#define SPI_RXFL_OFFSET 16
+#define SPI_RXFL_SIZE 6
+
/* Constants for BITS */
#define SPI_BITS_8_BPT 0
#define SPI_BITS_9_BPT 1
@@ -167,6 +209,9 @@
#define SPI_BITS_14_BPT 6
#define SPI_BITS_15_BPT 7
#define SPI_BITS_16_BPT 8
+#define SPI_ONE_DATA 0
+#define SPI_TWO_DATA 1
+#define SPI_FOUR_DATA 2
/* Bit manipulation macros */
#define SPI_BIT(name) \
@@ -185,11 +230,31 @@
__raw_readl((port)->regs + SPI_##reg)
#define spi_writel(port, reg, value) \
__raw_writel((value), (port)->regs + SPI_##reg)
+
+#define spi_readw(port, reg) \
+ __raw_readw((port)->regs + SPI_##reg)
+#define spi_writew(port, reg, value) \
+ __raw_writew((value), (port)->regs + SPI_##reg)
+
+#define spi_readb(port, reg) \
+ __raw_readb((port)->regs + SPI_##reg)
+#define spi_writeb(port, reg, value) \
+ __raw_writeb((value), (port)->regs + SPI_##reg)
#else
#define spi_readl(port, reg) \
readl_relaxed((port)->regs + SPI_##reg)
#define spi_writel(port, reg, value) \
writel_relaxed((value), (port)->regs + SPI_##reg)
+
+#define spi_readw(port, reg) \
+ readw_relaxed((port)->regs + SPI_##reg)
+#define spi_writew(port, reg, value) \
+ writew_relaxed((value), (port)->regs + SPI_##reg)
+
+#define spi_readb(port, reg) \
+ readb_relaxed((port)->regs + SPI_##reg)
+#define spi_writeb(port, reg, value) \
+ writeb_relaxed((value), (port)->regs + SPI_##reg)
#endif
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
* cache operations; better heuristics consider wordsize and bitrate.
@@ -246,11 +311,14 @@ struct atmel_spi {
bool use_dma;
bool use_pdc;
+ bool use_cs_gpios;
/* dmaengine data */
struct atmel_spi_dma dma;
bool keep_cs;
bool cs_active;
+
+ u32 fifo_size;
};
/* Controller-specific per-slave state */
@@ -321,7 +389,8 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
}
mr = spi_readl(as, MR);
- gpio_set_value(asd->npcs_pin, active);
+ if (as->use_cs_gpios)
+ gpio_set_value(asd->npcs_pin, active);
} else {
u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
int i;
@@ -337,7 +406,7 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
mr = spi_readl(as, MR);
mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
- if (spi->chip_select != 0)
+ if (as->use_cs_gpios && spi->chip_select != 0)
gpio_set_value(asd->npcs_pin, active);
spi_writel(as, MR, mr);
}
@@ -366,7 +435,9 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
asd->npcs_pin, active ? " (low)" : "",
mr);
- if (atmel_spi_is_v2(as) || spi->chip_select != 0)
+ if (!as->use_cs_gpios)
+ spi_writel(as, CR, SPI_BIT(LASTXFER));
+ else if (atmel_spi_is_v2(as) || spi->chip_select != 0)
gpio_set_value(asd->npcs_pin, !active);
}
@@ -406,6 +477,20 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as,
slave_config->dst_maxburst = 1;
slave_config->device_fc = false;
+ /*
+ * This driver uses fixed peripheral select mode (PS bit set to '0' in
+ * the Mode Register).
+ * So according to the datasheet, when FIFOs are available (and
+ * enabled), the Transmit FIFO operates in Multiple Data Mode.
+ * In this mode, up to 2 data, not 4, can be written into the Transmit
+ * Data Register in a single access.
+ * However, the first data has to be written into the lowest 16 bits and
+ * the second data into the highest 16 bits of the Transmit
+ * Data Register. For 8bit data (the most frequent case), it would
+ * require to rework tx_buf so each data would actualy fit 16 bits.
+ * So we'd rather write only one data at the time. Hence the transmit
+ * path works the same whether FIFOs are available (and enabled) or not.
+ */
slave_config->direction = DMA_MEM_TO_DEV;
if (dmaengine_slave_config(as->dma.chan_tx, slave_config)) {
dev_err(&as->pdev->dev,
@@ -413,6 +498,14 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as,
err = -EINVAL;
}
+ /*
+ * This driver configures the spi controller for master mode (MSTR bit
+ * set to '1' in the Mode Register).
+ * So according to the datasheet, when FIFOs are available (and
+ * enabled), the Receive FIFO operates in Single Data Mode.
+ * So the receive path works the same whether FIFOs are available (and
+ * enabled) or not.
+ */
slave_config->direction = DMA_DEV_TO_MEM;
if (dmaengine_slave_config(as->dma.chan_rx, slave_config)) {
dev_err(&as->pdev->dev,
@@ -502,10 +595,10 @@ static void dma_callback(void *data)
}
/*
- * Next transfer using PIO.
+ * Next transfer using PIO without FIFO.
*/
-static void atmel_spi_next_xfer_pio(struct spi_master *master,
- struct spi_transfer *xfer)
+static void atmel_spi_next_xfer_single(struct spi_master *master,
+ struct spi_transfer *xfer)
{
struct atmel_spi *as = spi_master_get_devdata(master);
unsigned long xfer_pos = xfer->len - as->current_remaining_bytes;
@@ -538,6 +631,99 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master,
}
/*
+ * Next transfer using PIO with FIFO.
+ */
+static void atmel_spi_next_xfer_fifo(struct spi_master *master,
+ struct spi_transfer *xfer)
+{
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ u32 current_remaining_data, num_data;
+ u32 offset = xfer->len - as->current_remaining_bytes;
+ const u16 *words = (const u16 *)((u8 *)xfer->tx_buf + offset);
+ const u8 *bytes = (const u8 *)((u8 *)xfer->tx_buf + offset);
+ u16 td0, td1;
+ u32 fifomr;
+
+ dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_fifo\n");
+
+ /* Compute the number of data to transfer in the current iteration */
+ current_remaining_data = ((xfer->bits_per_word > 8) ?
+ ((u32)as->current_remaining_bytes >> 1) :
+ (u32)as->current_remaining_bytes);
+ num_data = min(current_remaining_data, as->fifo_size);
+
+ /* Flush RX and TX FIFOs */
+ spi_writel(as, CR, SPI_BIT(RXFCLR) | SPI_BIT(TXFCLR));
+ while (spi_readl(as, FLR))
+ cpu_relax();
+
+ /* Set RX FIFO Threshold to the number of data to transfer */
+ fifomr = spi_readl(as, FMR);
+ spi_writel(as, FMR, SPI_BFINS(RXFTHRES, num_data, fifomr));
+
+ /* Clear FIFO flags in the Status Register, especially RXFTHF */
+ (void)spi_readl(as, SR);
+
+ /* Fill TX FIFO */
+ while (num_data >= 2) {
+ if (xfer->tx_buf) {
+ if (xfer->bits_per_word > 8) {
+ td0 = *words++;
+ td1 = *words++;
+ } else {
+ td0 = *bytes++;
+ td1 = *bytes++;
+ }
+ } else {
+ td0 = 0;
+ td1 = 0;
+ }
+
+ spi_writel(as, TDR, (td1 << 16) | td0);
+ num_data -= 2;
+ }
+
+ if (num_data) {
+ if (xfer->tx_buf) {
+ if (xfer->bits_per_word > 8)
+ td0 = *words++;
+ else
+ td0 = *bytes++;
+ } else {
+ td0 = 0;
+ }
+
+ spi_writew(as, TDR, td0);
+ num_data--;
+ }
+
+ dev_dbg(master->dev.parent,
+ " start fifo xfer %p: len %u tx %p rx %p bitpw %d\n",
+ xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
+ xfer->bits_per_word);
+
+ /*
+ * Enable RX FIFO Threshold Flag interrupt to be notified about
+ * transfer completion.
+ */
+ spi_writel(as, IER, SPI_BIT(RXFTHF) | SPI_BIT(OVRES));
+}
+
+/*
+ * Next transfer using PIO.
+ */
+static void atmel_spi_next_xfer_pio(struct spi_master *master,
+ struct spi_transfer *xfer)
+{
+ struct atmel_spi *as = spi_master_get_devdata(master);
+
+ if (as->fifo_size)
+ atmel_spi_next_xfer_fifo(master, xfer);
+ else
+ atmel_spi_next_xfer_single(master, xfer);
+}
+
+/*
* Submit next transfer for DMA.
*/
static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
@@ -839,13 +1025,8 @@ static void atmel_spi_disable_pdc_transfer(struct atmel_spi *as)
spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
}
-/* Called from IRQ
- *
- * Must update "current_remaining_bytes" to keep track of data
- * to transfer.
- */
static void
-atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
+atmel_spi_pump_single_data(struct atmel_spi *as, struct spi_transfer *xfer)
{
u8 *rxp;
u16 *rxp16;
@@ -872,6 +1053,57 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
}
}
+static void
+atmel_spi_pump_fifo_data(struct atmel_spi *as, struct spi_transfer *xfer)
+{
+ u32 fifolr = spi_readl(as, FLR);
+ u32 num_bytes, num_data = SPI_BFEXT(RXFL, fifolr);
+ u32 offset = xfer->len - as->current_remaining_bytes;
+ u16 *words = (u16 *)((u8 *)xfer->rx_buf + offset);
+ u8 *bytes = (u8 *)((u8 *)xfer->rx_buf + offset);
+ u16 rd; /* RD field is the lowest 16 bits of RDR */
+
+ /* Update the number of remaining bytes to transfer */
+ num_bytes = ((xfer->bits_per_word > 8) ?
+ (num_data << 1) :
+ num_data);
+
+ if (as->current_remaining_bytes > num_bytes)
+ as->current_remaining_bytes -= num_bytes;
+ else
+ as->current_remaining_bytes = 0;
+
+ /* Handle odd number of bytes when data are more than 8bit width */
+ if (xfer->bits_per_word > 8)
+ as->current_remaining_bytes &= ~0x1;
+
+ /* Read data */
+ while (num_data) {
+ rd = spi_readl(as, RDR);
+ if (xfer->rx_buf) {
+ if (xfer->bits_per_word > 8)
+ *words++ = rd;
+ else
+ *bytes++ = rd;
+ }
+ num_data--;
+ }
+}
+
+/* Called from IRQ
+ *
+ * Must update "current_remaining_bytes" to keep track of data
+ * to transfer.
+ */
+static void
+atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
+{
+ if (as->fifo_size)
+ atmel_spi_pump_fifo_data(as, xfer);
+ else
+ atmel_spi_pump_single_data(as, xfer);
+}
+
/* Interrupt
*
* No need for locking in this Interrupt handler: done_status is the
@@ -912,7 +1144,7 @@ atmel_spi_pio_interrupt(int irq, void *dev_id)
complete(&as->xfer_completion);
- } else if (pending & SPI_BIT(RDRF)) {
+ } else if (pending & (SPI_BIT(RDRF) | SPI_BIT(RXFTHF))) {
atmel_spi_lock(as);
if (as->current_remaining_bytes) {
@@ -996,6 +1228,8 @@ static int atmel_spi_setup(struct spi_device *spi)
csr |= SPI_BIT(CPOL);
if (!(spi->mode & SPI_CPHA))
csr |= SPI_BIT(NCPHA);
+ if (!as->use_cs_gpios)
+ csr |= SPI_BIT(CSAAT);
/* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
*
@@ -1009,7 +1243,9 @@ static int atmel_spi_setup(struct spi_device *spi)
/* chipselect must have been muxed as GPIO (e.g. in board setup) */
npcs_pin = (unsigned long)spi->controller_data;
- if (gpio_is_valid(spi->cs_gpio))
+ if (!as->use_cs_gpios)
+ npcs_pin = spi->chip_select;
+ else if (gpio_is_valid(spi->cs_gpio))
npcs_pin = spi->cs_gpio;
asd = spi->controller_state;
@@ -1018,15 +1254,19 @@ static int atmel_spi_setup(struct spi_device *spi)
if (!asd)
return -ENOMEM;
- ret = gpio_request(npcs_pin, dev_name(&spi->dev));
- if (ret) {
- kfree(asd);
- return ret;
+ if (as->use_cs_gpios) {
+ ret = gpio_request(npcs_pin, dev_name(&spi->dev));
+ if (ret) {
+ kfree(asd);
+ return ret;
+ }
+
+ gpio_direction_output(npcs_pin,
+ !(spi->mode & SPI_CS_HIGH));
}
asd->npcs_pin = npcs_pin;
spi->controller_state = asd;
- gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
}
asd->csr = csr;
@@ -1338,6 +1578,13 @@ static int atmel_spi_probe(struct platform_device *pdev)
atmel_get_caps(as);
+ as->use_cs_gpios = true;
+ if (atmel_spi_is_v2(as) &&
+ !of_get_property(pdev->dev.of_node, "cs-gpios", NULL)) {
+ as->use_cs_gpios = false;
+ master->num_chipselect = 4;
+ }
+
as->use_dma = false;
as->use_pdc = false;
if (as->caps.has_dma_support) {
@@ -1380,6 +1627,13 @@ static int atmel_spi_probe(struct platform_device *pdev)
spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
spi_writel(as, CR, SPI_BIT(SPIEN));
+ as->fifo_size = 0;
+ if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
+ &as->fifo_size)) {
+ dev_info(&pdev->dev, "Using FIFO (%u data)\n", as->fifo_size);
+ spi_writel(as, CR, SPI_BIT(FIFOEN));
+ }
+
/* go! */
dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
(unsigned long)regs->start, irq);
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 37875cf94..59705ab23 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -20,18 +20,22 @@
* GNU General Public License for more details.
*/
+#include <asm/page.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
+#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
#include <linux/spi/spi.h>
/* SPI register offsets */
@@ -69,7 +73,8 @@
#define BCM2835_SPI_CS_CS_01 0x00000001
#define BCM2835_SPI_POLLING_LIMIT_US 30
-#define BCM2835_SPI_TIMEOUT_MS 30000
+#define BCM2835_SPI_POLLING_JIFFIES 2
+#define BCM2835_SPI_DMA_MIN_LENGTH 96
#define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
| SPI_NO_CS | SPI_3WIRE)
@@ -83,6 +88,7 @@ struct bcm2835_spi {
u8 *rx_buf;
int tx_len;
int rx_len;
+ bool dma_pending;
};
static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
@@ -128,12 +134,15 @@ static void bcm2835_spi_reset_hw(struct spi_master *master)
/* Disable SPI interrupts and transfer */
cs &= ~(BCM2835_SPI_CS_INTR |
BCM2835_SPI_CS_INTD |
+ BCM2835_SPI_CS_DMAEN |
BCM2835_SPI_CS_TA);
/* and reset RX/TX FIFOS */
cs |= BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX;
/* and reset the SPI_HW */
bcm2835_wr(bs, BCM2835_SPI_CS, cs);
+ /* as well as DLEN */
+ bcm2835_wr(bs, BCM2835_SPI_DLEN, 0);
}
static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
@@ -157,42 +166,6 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
- struct spi_device *spi,
- struct spi_transfer *tfr,
- u32 cs,
- unsigned long xfer_time_us)
-{
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
- /* set timeout to 1 second of maximum polling */
- unsigned long timeout = jiffies + HZ;
-
- /* enable HW block without interrupts */
- bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA);
-
- /* loop until finished the transfer */
- while (bs->rx_len) {
- /* read from fifo as much as possible */
- bcm2835_rd_fifo(bs);
- /* fill in tx fifo as much as possible */
- bcm2835_wr_fifo(bs);
- /* if we still expect some data after the read,
- * check for a possible timeout
- */
- if (bs->rx_len && time_after(jiffies, timeout)) {
- /* Transfer complete - reset SPI HW */
- bcm2835_spi_reset_hw(master);
- /* and return timeout */
- return -ETIMEDOUT;
- }
- }
-
- /* Transfer complete - reset SPI HW */
- bcm2835_spi_reset_hw(master);
- /* and return without waiting for completion */
- return 0;
-}
-
static int bcm2835_spi_transfer_one_irq(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *tfr,
@@ -229,6 +202,329 @@ static int bcm2835_spi_transfer_one_irq(struct spi_master *master,
return 1;
}
+/*
+ * DMA support
+ *
+ * this implementation has currently a few issues in so far as it does
+ * not work arrount limitations of the HW.
+ *
+ * the main one being that DMA transfers are limited to 16 bit
+ * (so 0 to 65535 bytes) by the SPI HW due to BCM2835_SPI_DLEN
+ *
+ * also we currently assume that the scatter-gather fragments are
+ * all multiple of 4 (except the last) - otherwise we would need
+ * to reset the FIFO before subsequent transfers...
+ * this also means that tx/rx transfers sg's need to be of equal size!
+ *
+ * there may be a few more border-cases we may need to address as well
+ * but unfortunately this would mean splitting up the scatter-gather
+ * list making it slightly unpractical...
+ */
+static void bcm2835_spi_dma_done(void *data)
+{
+ struct spi_master *master = data;
+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
+
+ /* reset fifo and HW */
+ bcm2835_spi_reset_hw(master);
+
+ /* and terminate tx-dma as we do not have an irq for it
+ * because when the rx dma will terminate and this callback
+ * is called the tx-dma must have finished - can't get to this
+ * situation otherwise...
+ */
+ dmaengine_terminate_all(master->dma_tx);
+
+ /* mark as no longer pending */
+ bs->dma_pending = 0;
+
+ /* and mark as completed */;
+ complete(&master->xfer_completion);
+}
+
+static int bcm2835_spi_prepare_sg(struct spi_master *master,
+ struct spi_transfer *tfr,
+ bool is_tx)
+{
+ struct dma_chan *chan;
+ struct scatterlist *sgl;
+ unsigned int nents;
+ enum dma_transfer_direction dir;
+ unsigned long flags;
+
+ struct dma_async_tx_descriptor *desc;
+ dma_cookie_t cookie;
+
+ if (is_tx) {
+ dir = DMA_MEM_TO_DEV;
+ chan = master->dma_tx;
+ nents = tfr->tx_sg.nents;
+ sgl = tfr->tx_sg.sgl;
+ flags = 0 /* no tx interrupt */;
+
+ } else {
+ dir = DMA_DEV_TO_MEM;
+ chan = master->dma_rx;
+ nents = tfr->rx_sg.nents;
+ sgl = tfr->rx_sg.sgl;
+ flags = DMA_PREP_INTERRUPT;
+ }
+ /* prepare the channel */
+ desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags);
+ if (!desc)
+ return -EINVAL;
+
+ /* set callback for rx */
+ if (!is_tx) {
+ desc->callback = bcm2835_spi_dma_done;
+ desc->callback_param = master;
+ }
+
+ /* submit it to DMA-engine */
+ cookie = dmaengine_submit(desc);
+
+ return dma_submit_error(cookie);
+}
+
+static inline int bcm2835_check_sg_length(struct sg_table *sgt)
+{
+ int i;
+ struct scatterlist *sgl;
+
+ /* check that the sg entries are word-sized (except for last) */
+ for_each_sg(sgt->sgl, sgl, (int)sgt->nents - 1, i) {
+ if (sg_dma_len(sgl) % 4)
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int bcm2835_spi_transfer_one_dma(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr,
+ u32 cs)
+{
+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ int ret;
+
+ /* check that the scatter gather segments are all a multiple of 4 */
+ if (bcm2835_check_sg_length(&tfr->tx_sg) ||
+ bcm2835_check_sg_length(&tfr->rx_sg)) {
+ dev_warn_once(&spi->dev,
+ "scatter gather segment length is not a multiple of 4 - falling back to interrupt mode\n");
+ return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
+ }
+
+ /* setup tx-DMA */
+ ret = bcm2835_spi_prepare_sg(master, tfr, true);
+ if (ret)
+ return ret;
+
+ /* start TX early */
+ dma_async_issue_pending(master->dma_tx);
+
+ /* mark as dma pending */
+ bs->dma_pending = 1;
+
+ /* set the DMA length */
+ bcm2835_wr(bs, BCM2835_SPI_DLEN, tfr->len);
+
+ /* start the HW */
+ bcm2835_wr(bs, BCM2835_SPI_CS,
+ cs | BCM2835_SPI_CS_TA | BCM2835_SPI_CS_DMAEN);
+
+ /* setup rx-DMA late - to run transfers while
+ * mapping of the rx buffers still takes place
+ * this saves 10us or more.
+ */
+ ret = bcm2835_spi_prepare_sg(master, tfr, false);
+ if (ret) {
+ /* need to reset on errors */
+ dmaengine_terminate_all(master->dma_tx);
+ bcm2835_spi_reset_hw(master);
+ return ret;
+ }
+
+ /* start rx dma late */
+ dma_async_issue_pending(master->dma_rx);
+
+ /* wait for wakeup in framework */
+ return 1;
+}
+
+static bool bcm2835_spi_can_dma(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ /* only run for gpio_cs */
+ if (!gpio_is_valid(spi->cs_gpio))
+ return false;
+
+ /* we start DMA efforts only on bigger transfers */
+ if (tfr->len < BCM2835_SPI_DMA_MIN_LENGTH)
+ return false;
+
+ /* BCM2835_SPI_DLEN has defined a max transfer size as
+ * 16 bit, so max is 65535
+ * we can revisit this by using an alternative transfer
+ * method - ideally this would get done without any more
+ * interaction...
+ */
+ if (tfr->len > 65535) {
+ dev_warn_once(&spi->dev,
+ "transfer size of %d too big for dma-transfer\n",
+ tfr->len);
+ return false;
+ }
+
+ /* if we run rx/tx_buf with word aligned addresses then we are OK */
+ if ((((size_t)tfr->rx_buf & 3) == 0) &&
+ (((size_t)tfr->tx_buf & 3) == 0))
+ return true;
+
+ /* otherwise we only allow transfers within the same page
+ * to avoid wasting time on dma_mapping when it is not practical
+ */
+ if (((size_t)tfr->tx_buf & PAGE_MASK) + tfr->len > PAGE_SIZE) {
+ dev_warn_once(&spi->dev,
+ "Unaligned spi tx-transfer bridging page\n");
+ return false;
+ }
+ if (((size_t)tfr->rx_buf & PAGE_MASK) + tfr->len > PAGE_SIZE) {
+ dev_warn_once(&spi->dev,
+ "Unaligned spi tx-transfer bridging page\n");
+ return false;
+ }
+
+ /* return OK */
+ return true;
+}
+
+static void bcm2835_dma_release(struct spi_master *master)
+{
+ if (master->dma_tx) {
+ dmaengine_terminate_all(master->dma_tx);
+ dma_release_channel(master->dma_tx);
+ master->dma_tx = NULL;
+ }
+ if (master->dma_rx) {
+ dmaengine_terminate_all(master->dma_rx);
+ dma_release_channel(master->dma_rx);
+ master->dma_rx = NULL;
+ }
+}
+
+static void bcm2835_dma_init(struct spi_master *master, struct device *dev)
+{
+ struct dma_slave_config slave_config;
+ const __be32 *addr;
+ dma_addr_t dma_reg_base;
+ int ret;
+
+ /* base address in dma-space */
+ addr = of_get_address(master->dev.of_node, 0, NULL, NULL);
+ if (!addr) {
+ dev_err(dev, "could not get DMA-register address - not using dma mode\n");
+ goto err;
+ }
+ dma_reg_base = be32_to_cpup(addr);
+
+ /* get tx/rx dma */
+ master->dma_tx = dma_request_slave_channel(dev, "tx");
+ if (!master->dma_tx) {
+ dev_err(dev, "no tx-dma configuration found - not using dma mode\n");
+ goto err;
+ }
+ master->dma_rx = dma_request_slave_channel(dev, "rx");
+ if (!master->dma_rx) {
+ dev_err(dev, "no rx-dma configuration found - not using dma mode\n");
+ goto err_release;
+ }
+
+ /* configure DMAs */
+ slave_config.direction = DMA_MEM_TO_DEV;
+ slave_config.dst_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO);
+ slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+ ret = dmaengine_slave_config(master->dma_tx, &slave_config);
+ if (ret)
+ goto err_config;
+
+ slave_config.direction = DMA_DEV_TO_MEM;
+ slave_config.src_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO);
+ slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+ ret = dmaengine_slave_config(master->dma_rx, &slave_config);
+ if (ret)
+ goto err_config;
+
+ /* all went well, so set can_dma */
+ master->can_dma = bcm2835_spi_can_dma;
+ master->max_dma_len = 65535; /* limitation by BCM2835_SPI_DLEN */
+ /* need to do TX AND RX DMA, so we need dummy buffers */
+ master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+
+ return;
+
+err_config:
+ dev_err(dev, "issue configuring dma: %d - not using DMA mode\n",
+ ret);
+err_release:
+ bcm2835_dma_release(master);
+err:
+ return;
+}
+
+static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr,
+ u32 cs,
+ unsigned long xfer_time_us)
+{
+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ unsigned long timeout;
+
+ /* enable HW block without interrupts */
+ bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA);
+
+ /* fill in the fifo before timeout calculations
+ * if we are interrupted here, then the data is
+ * getting transferred by the HW while we are interrupted
+ */
+ bcm2835_wr_fifo(bs);
+
+ /* set the timeout */
+ timeout = jiffies + BCM2835_SPI_POLLING_JIFFIES;
+
+ /* loop until finished the transfer */
+ while (bs->rx_len) {
+ /* fill in tx fifo with remaining data */
+ bcm2835_wr_fifo(bs);
+
+ /* read from fifo as much as possible */
+ bcm2835_rd_fifo(bs);
+
+ /* if there is still data pending to read
+ * then check the timeout
+ */
+ if (bs->rx_len && time_after(jiffies, timeout)) {
+ dev_dbg_ratelimited(&spi->dev,
+ "timeout period reached: jiffies: %lu remaining tx/rx: %d/%d - falling back to interrupt mode\n",
+ jiffies - timeout,
+ bs->tx_len, bs->rx_len);
+ /* fall back to interrupt mode */
+ return bcm2835_spi_transfer_one_irq(master, spi,
+ tfr, cs);
+ }
+ }
+
+ /* Transfer complete - reset SPI HW */
+ bcm2835_spi_reset_hw(master);
+ /* and return without waiting for completion */
+ return 0;
+}
+
static int bcm2835_spi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *tfr)
@@ -288,12 +584,26 @@ static int bcm2835_spi_transfer_one(struct spi_master *master,
return bcm2835_spi_transfer_one_poll(master, spi, tfr,
cs, xfer_time_us);
+ /* run in dma mode if conditions are right */
+ if (master->can_dma && bcm2835_spi_can_dma(master, spi, tfr))
+ return bcm2835_spi_transfer_one_dma(master, spi, tfr, cs);
+
+ /* run in interrupt-mode */
return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
}
static void bcm2835_spi_handle_err(struct spi_master *master,
struct spi_message *msg)
{
+ struct bcm2835_spi *bs = spi_master_get_devdata(master);
+
+ /* if an error occurred and we have an active dma, then terminate */
+ if (bs->dma_pending) {
+ dmaengine_terminate_all(master->dma_tx);
+ dmaengine_terminate_all(master->dma_rx);
+ bs->dma_pending = 0;
+ }
+ /* and reset */
bcm2835_spi_reset_hw(master);
}
@@ -463,6 +773,8 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
goto out_clk_disable;
}
+ bcm2835_dma_init(master, &pdev->dev);
+
/* initialise the hardware with the default polarities */
bcm2835_wr(bs, BCM2835_SPI_CS,
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
@@ -493,6 +805,8 @@ static int bcm2835_spi_remove(struct platform_device *pdev)
clk_disable_unprepare(bs->clk);
+ bcm2835_dma_release(master);
+
return 0;
}
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 5e991065f..987afebea 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -265,7 +265,7 @@ static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz);
- if (ret < 3 || ret > 256)
+ if (ret < 1 || ret > 256)
return -EINVAL;
return ret - 1;
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 5fe54cda3..86bcdd68c 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
@@ -47,6 +48,7 @@
#define SPI_MCR_CLR_RXF (1 << 10)
#define SPI_TCR 0x08
+#define SPI_TCR_GET_TCNT(x) (((x) & 0xffff0000) >> 16)
#define SPI_CTAR(x) (0x0c + (((x) & 0x3) * 4))
#define SPI_CTAR_FMSZ(x) (((x) & 0x0000000f) << 27)
@@ -67,9 +69,11 @@
#define SPI_SR 0x2c
#define SPI_SR_EOQF 0x10000000
+#define SPI_SR_TCFQF 0x80000000
#define SPI_RSER 0x30
#define SPI_RSER_EOQFE 0x10000000
+#define SPI_RSER_TCFQE 0x80000000
#define SPI_PUSHR 0x34
#define SPI_PUSHR_CONT (1 << 31)
@@ -102,12 +106,35 @@
#define SPI_CS_ASSERT 0x02
#define SPI_CS_DROP 0x04
+#define SPI_TCR_TCNT_MAX 0x10000
+
struct chip_data {
u32 mcr_val;
u32 ctar_val;
u16 void_write_data;
};
+enum dspi_trans_mode {
+ DSPI_EOQ_MODE = 0,
+ DSPI_TCFQ_MODE,
+};
+
+struct fsl_dspi_devtype_data {
+ enum dspi_trans_mode trans_mode;
+};
+
+static const struct fsl_dspi_devtype_data vf610_data = {
+ .trans_mode = DSPI_EOQ_MODE,
+};
+
+static const struct fsl_dspi_devtype_data ls1021a_v1_data = {
+ .trans_mode = DSPI_TCFQ_MODE,
+};
+
+static const struct fsl_dspi_devtype_data ls2085a_data = {
+ .trans_mode = DSPI_TCFQ_MODE,
+};
+
struct fsl_dspi {
struct spi_master *master;
struct platform_device *pdev;
@@ -128,9 +155,12 @@ struct fsl_dspi {
u8 cs;
u16 void_write_data;
u32 cs_change;
+ struct fsl_dspi_devtype_data *devtype_data;
wait_queue_head_t waitq;
u32 waitflags;
+
+ u32 spi_tcnt;
};
static inline int is_double_byte_mode(struct fsl_dspi *dspi)
@@ -213,63 +243,60 @@ static void ns_delay_scale(char *psc, char *sc, int delay_ns,
}
}
-static int dspi_transfer_write(struct fsl_dspi *dspi)
+static u32 dspi_data_to_pushr(struct fsl_dspi *dspi, int tx_word)
{
- int tx_count = 0;
- int tx_word;
u16 d16;
- u8 d8;
- u32 dspi_pushr = 0;
- int first = 1;
- tx_word = is_double_byte_mode(dspi);
+ if (!(dspi->dataflags & TRAN_STATE_TX_VOID))
+ d16 = tx_word ? *(u16 *)dspi->tx : *(u8 *)dspi->tx;
+ else
+ d16 = dspi->void_write_data;
- /* If we are in word mode, but only have a single byte to transfer
- * then switch to byte mode temporarily. Will switch back at the
- * end of the transfer.
- */
- if (tx_word && (dspi->len == 1)) {
- dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
- regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
- SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8));
- tx_word = 0;
- }
+ dspi->tx += tx_word + 1;
+ dspi->len -= tx_word + 1;
- while (dspi->len && (tx_count < DSPI_FIFO_SIZE)) {
- if (tx_word) {
- if (dspi->len == 1)
- break;
+ return SPI_PUSHR_TXDATA(d16) |
+ SPI_PUSHR_PCS(dspi->cs) |
+ SPI_PUSHR_CTAS(dspi->cs) |
+ SPI_PUSHR_CONT;
+}
- if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) {
- d16 = *(u16 *)dspi->tx;
- dspi->tx += 2;
- } else {
- d16 = dspi->void_write_data;
- }
+static void dspi_data_from_popr(struct fsl_dspi *dspi, int rx_word)
+{
+ u16 d;
+ unsigned int val;
- dspi_pushr = SPI_PUSHR_TXDATA(d16) |
- SPI_PUSHR_PCS(dspi->cs) |
- SPI_PUSHR_CTAS(dspi->cs) |
- SPI_PUSHR_CONT;
+ regmap_read(dspi->regmap, SPI_POPR, &val);
+ d = SPI_POPR_RXDATA(val);
- dspi->len -= 2;
- } else {
- if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) {
+ if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
+ rx_word ? (*(u16 *)dspi->rx = d) : (*(u8 *)dspi->rx = d);
- d8 = *(u8 *)dspi->tx;
- dspi->tx++;
- } else {
- d8 = (u8)dspi->void_write_data;
- }
+ dspi->rx += rx_word + 1;
+}
- dspi_pushr = SPI_PUSHR_TXDATA(d8) |
- SPI_PUSHR_PCS(dspi->cs) |
- SPI_PUSHR_CTAS(dspi->cs) |
- SPI_PUSHR_CONT;
+static int dspi_eoq_write(struct fsl_dspi *dspi)
+{
+ int tx_count = 0;
+ int tx_word;
+ u32 dspi_pushr = 0;
+
+ tx_word = is_double_byte_mode(dspi);
- dspi->len--;
+ while (dspi->len && (tx_count < DSPI_FIFO_SIZE)) {
+ /* If we are in word mode, only have a single byte to transfer
+ * switch to byte mode temporarily. Will switch back at the
+ * end of the transfer.
+ */
+ if (tx_word && (dspi->len == 1)) {
+ dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
+ regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
+ SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8));
+ tx_word = 0;
}
+ dspi_pushr = dspi_data_to_pushr(dspi, tx_word);
+
if (dspi->len == 0 || tx_count == DSPI_FIFO_SIZE - 1) {
/* last transfer in the transfer */
dspi_pushr |= SPI_PUSHR_EOQ;
@@ -278,11 +305,6 @@ static int dspi_transfer_write(struct fsl_dspi *dspi)
} else if (tx_word && (dspi->len == 1))
dspi_pushr |= SPI_PUSHR_EOQ;
- if (first) {
- first = 0;
- dspi_pushr |= SPI_PUSHR_CTCNT; /* clear counter */
- }
-
regmap_write(dspi->regmap, SPI_PUSHR, dspi_pushr);
tx_count++;
@@ -291,40 +313,55 @@ static int dspi_transfer_write(struct fsl_dspi *dspi)
return tx_count * (tx_word + 1);
}
-static int dspi_transfer_read(struct fsl_dspi *dspi)
+static int dspi_eoq_read(struct fsl_dspi *dspi)
{
int rx_count = 0;
int rx_word = is_double_byte_mode(dspi);
- u16 d;
while ((dspi->rx < dspi->rx_end)
&& (rx_count < DSPI_FIFO_SIZE)) {
- if (rx_word) {
- unsigned int val;
+ if (rx_word && (dspi->rx_end - dspi->rx) == 1)
+ rx_word = 0;
- if ((dspi->rx_end - dspi->rx) == 1)
- break;
+ dspi_data_from_popr(dspi, rx_word);
+ rx_count++;
+ }
- regmap_read(dspi->regmap, SPI_POPR, &val);
- d = SPI_POPR_RXDATA(val);
+ return rx_count;
+}
- if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
- *(u16 *)dspi->rx = d;
- dspi->rx += 2;
+static int dspi_tcfq_write(struct fsl_dspi *dspi)
+{
+ int tx_word;
+ u32 dspi_pushr = 0;
- } else {
- unsigned int val;
+ tx_word = is_double_byte_mode(dspi);
- regmap_read(dspi->regmap, SPI_POPR, &val);
- d = SPI_POPR_RXDATA(val);
- if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
- *(u8 *)dspi->rx = d;
- dspi->rx++;
- }
- rx_count++;
+ if (tx_word && (dspi->len == 1)) {
+ dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
+ regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
+ SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8));
+ tx_word = 0;
}
- return rx_count;
+ dspi_pushr = dspi_data_to_pushr(dspi, tx_word);
+
+ if ((dspi->cs_change) && (!dspi->len))
+ dspi_pushr &= ~SPI_PUSHR_CONT;
+
+ regmap_write(dspi->regmap, SPI_PUSHR, dspi_pushr);
+
+ return tx_word + 1;
+}
+
+static void dspi_tcfq_read(struct fsl_dspi *dspi)
+{
+ int rx_word = is_double_byte_mode(dspi);
+
+ if (rx_word && (dspi->rx_end - dspi->rx) == 1)
+ rx_word = 0;
+
+ dspi_data_from_popr(dspi, rx_word);
}
static int dspi_transfer_one_message(struct spi_master *master,
@@ -334,6 +371,12 @@ static int dspi_transfer_one_message(struct spi_master *master,
struct spi_device *spi = message->spi;
struct spi_transfer *transfer;
int status = 0;
+ enum dspi_trans_mode trans_mode;
+ u32 spi_tcr;
+
+ regmap_read(dspi->regmap, SPI_TCR, &spi_tcr);
+ dspi->spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr);
+
message->actual_length = 0;
list_for_each_entry(transfer, &message->transfers, transfer_list) {
@@ -341,10 +384,10 @@ static int dspi_transfer_one_message(struct spi_master *master,
dspi->cur_msg = message;
dspi->cur_chip = spi_get_ctldata(spi);
dspi->cs = spi->chip_select;
+ dspi->cs_change = 0;
if (dspi->cur_transfer->transfer_list.next
== &dspi->cur_msg->transfers)
- transfer->cs_change = 1;
- dspi->cs_change = transfer->cs_change;
+ dspi->cs_change = 1;
dspi->void_write_data = dspi->cur_chip->void_write_data;
dspi->dataflags = 0;
@@ -370,8 +413,22 @@ static int dspi_transfer_one_message(struct spi_master *master,
regmap_write(dspi->regmap, SPI_CTAR(dspi->cs),
dspi->cur_chip->ctar_val);
- regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
- message->actual_length += dspi_transfer_write(dspi);
+ trans_mode = dspi->devtype_data->trans_mode;
+ switch (trans_mode) {
+ case DSPI_EOQ_MODE:
+ regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
+ dspi_eoq_write(dspi);
+ break;
+ case DSPI_TCFQ_MODE:
+ regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
+ dspi_tcfq_write(dspi);
+ break;
+ default:
+ dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
+ trans_mode);
+ status = -EINVAL;
+ goto out;
+ }
if (wait_event_interruptible(dspi->waitq, dspi->waitflags))
dev_err(&dspi->pdev->dev, "wait transfer complete fail!\n");
@@ -381,6 +438,7 @@ static int dspi_transfer_one_message(struct spi_master *master,
udelay(transfer->delay_usecs);
}
+out:
message->status = status;
spi_finalize_current_message(master);
@@ -460,27 +518,89 @@ static void dspi_cleanup(struct spi_device *spi)
static irqreturn_t dspi_interrupt(int irq, void *dev_id)
{
struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id;
-
struct spi_message *msg = dspi->cur_msg;
+ enum dspi_trans_mode trans_mode;
+ u32 spi_sr, spi_tcr;
+ u32 spi_tcnt, tcnt_diff;
+ int tx_word;
- regmap_write(dspi->regmap, SPI_SR, SPI_SR_EOQF);
- dspi_transfer_read(dspi);
-
- if (!dspi->len) {
+ regmap_read(dspi->regmap, SPI_SR, &spi_sr);
+ regmap_write(dspi->regmap, SPI_SR, spi_sr);
+
+
+ if (spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF)) {
+ tx_word = is_double_byte_mode(dspi);
+
+ regmap_read(dspi->regmap, SPI_TCR, &spi_tcr);
+ spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr);
+ /*
+ * The width of SPI Transfer Counter in SPI_TCR is 16bits,
+ * so the max couner is 65535. When the counter reach 65535,
+ * it will wrap around, counter reset to zero.
+ * spi_tcnt my be less than dspi->spi_tcnt, it means the
+ * counter already wrapped around.
+ * SPI Transfer Counter is a counter of transmitted frames.
+ * The size of frame maybe two bytes.
+ */
+ tcnt_diff = ((spi_tcnt + SPI_TCR_TCNT_MAX) - dspi->spi_tcnt)
+ % SPI_TCR_TCNT_MAX;
+ tcnt_diff *= (tx_word + 1);
if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM)
- regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
- SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(16));
+ tcnt_diff--;
+
+ msg->actual_length += tcnt_diff;
+
+ dspi->spi_tcnt = spi_tcnt;
+
+ trans_mode = dspi->devtype_data->trans_mode;
+ switch (trans_mode) {
+ case DSPI_EOQ_MODE:
+ dspi_eoq_read(dspi);
+ break;
+ case DSPI_TCFQ_MODE:
+ dspi_tcfq_read(dspi);
+ break;
+ default:
+ dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
+ trans_mode);
+ return IRQ_HANDLED;
+ }
- dspi->waitflags = 1;
- wake_up_interruptible(&dspi->waitq);
- } else
- msg->actual_length += dspi_transfer_write(dspi);
+ if (!dspi->len) {
+ if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM) {
+ regmap_update_bits(dspi->regmap,
+ SPI_CTAR(dspi->cs),
+ SPI_FRAME_BITS_MASK,
+ SPI_FRAME_BITS(16));
+ dspi->dataflags &= ~TRAN_STATE_WORD_ODD_NUM;
+ }
+
+ dspi->waitflags = 1;
+ wake_up_interruptible(&dspi->waitq);
+ } else {
+ switch (trans_mode) {
+ case DSPI_EOQ_MODE:
+ dspi_eoq_write(dspi);
+ break;
+ case DSPI_TCFQ_MODE:
+ dspi_tcfq_write(dspi);
+ break;
+ default:
+ dev_err(&dspi->pdev->dev,
+ "unsupported trans_mode %u\n",
+ trans_mode);
+ }
+ }
+ }
return IRQ_HANDLED;
}
static const struct of_device_id fsl_dspi_dt_ids[] = {
- { .compatible = "fsl,vf610-dspi", .data = NULL, },
+ { .compatible = "fsl,vf610-dspi", .data = (void *)&vf610_data, },
+ { .compatible = "fsl,ls1021a-v1.0-dspi",
+ .data = (void *)&ls1021a_v1_data, },
+ { .compatible = "fsl,ls2085a-dspi", .data = (void *)&ls2085a_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
@@ -494,6 +614,8 @@ static int dspi_suspend(struct device *dev)
spi_master_suspend(master);
clk_disable_unprepare(dspi->clk);
+ pinctrl_pm_select_sleep_state(dev);
+
return 0;
}
@@ -502,6 +624,8 @@ static int dspi_resume(struct device *dev)
struct spi_master *master = dev_get_drvdata(dev);
struct fsl_dspi *dspi = spi_master_get_devdata(master);
+ pinctrl_pm_select_default_state(dev);
+
clk_prepare_enable(dspi->clk);
spi_master_resume(master);
@@ -526,6 +650,8 @@ static int dspi_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
int ret = 0, cs_num, bus_num;
+ const struct of_device_id *of_id =
+ of_match_device(fsl_dspi_dt_ids, &pdev->dev);
master = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
if (!master)
@@ -559,6 +685,13 @@ static int dspi_probe(struct platform_device *pdev)
}
master->bus_num = bus_num;
+ dspi->devtype_data = (struct fsl_dspi_devtype_data *)of_id->data;
+ if (!dspi->devtype_data) {
+ dev_err(&pdev->dev, "can't get devtype_data\n");
+ ret = -EFAULT;
+ goto out_master_put;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base)) {
@@ -566,7 +699,7 @@ static int dspi_probe(struct platform_device *pdev)
goto out_master_put;
}
- dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dspi", base,
+ dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
&dspi_regmap_config);
if (IS_ERR(dspi->regmap)) {
dev_err(&pdev->dev, "failed to init regmap: %ld\n",
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index 80d245ac8..d3f05a052 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -561,9 +561,13 @@ void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
/* spin until TX is done */
ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg(
- &reg_base->event)) & SPIE_NF) == 0, 1000, 0);
+ &reg_base->event)) & SPIE_NF), 1000, 0);
if (!ret) {
dev_err(mspi->dev, "tired waiting for SPIE_NF\n");
+
+ /* Clear the SPIE bits */
+ mpc8xxx_spi_write_reg(&reg_base->event, events);
+ complete(&mspi->done);
return;
}
}
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 412b9c86b..f9deb84e4 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -675,7 +675,7 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
.devtype = IMX51_ECSPI,
};
-static struct platform_device_id spi_imx_devtype[] = {
+static const struct platform_device_id spi_imx_devtype[] = {
{
.name = "imx1-cspi",
.driver_data = (kernel_ulong_t) &imx1_cspi_devtype_data,
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index d1a5b9fc3..586738412 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -35,6 +35,7 @@
#include <linux/gcd.h>
#include <linux/spi/spi.h>
+#include <linux/gpio.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
@@ -242,17 +243,27 @@ static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCTRL0);
}
-static void omap2_mcspi_force_cs(struct spi_device *spi, int cs_active)
+static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
{
u32 l;
- l = mcspi_cached_chconf0(spi);
- if (cs_active)
- l |= OMAP2_MCSPI_CHCONF_FORCE;
- else
- l &= ~OMAP2_MCSPI_CHCONF_FORCE;
+ /* The controller handles the inverted chip selects
+ * using the OMAP2_MCSPI_CHCONF_EPOL bit so revert
+ * the inversion from the core spi_set_cs function.
+ */
+ if (spi->mode & SPI_CS_HIGH)
+ enable = !enable;
- mcspi_write_chconf0(spi, l);
+ if (spi->controller_state) {
+ l = mcspi_cached_chconf0(spi);
+
+ if (enable)
+ l &= ~OMAP2_MCSPI_CHCONF_FORCE;
+ else
+ l |= OMAP2_MCSPI_CHCONF_FORCE;
+
+ mcspi_write_chconf0(spi, l);
+ }
}
static void omap2_mcspi_set_master_mode(struct spi_master *master)
@@ -1011,6 +1022,15 @@ static int omap2_mcspi_setup(struct spi_device *spi)
return ret;
}
+ if (gpio_is_valid(spi->cs_gpio)) {
+ ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
+ if (ret) {
+ dev_err(&spi->dev, "failed to request gpio\n");
+ return ret;
+ }
+ gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+ }
+
ret = pm_runtime_get_sync(mcspi->dev);
if (ret < 0)
return ret;
@@ -1050,9 +1070,13 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
mcspi_dma->dma_tx = NULL;
}
}
+
+ if (gpio_is_valid(spi->cs_gpio))
+ gpio_free(spi->cs_gpio);
}
-static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
+static int omap2_mcspi_work_one(struct omap2_mcspi *mcspi,
+ struct spi_device *spi, struct spi_transfer *t)
{
/* We only enable one channel at a time -- the one whose message is
@@ -1062,18 +1086,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
* chipselect with the FORCE bit ... CS != channel enable.
*/
- struct spi_device *spi;
- struct spi_transfer *t = NULL;
struct spi_master *master;
struct omap2_mcspi_dma *mcspi_dma;
- int cs_active = 0;
struct omap2_mcspi_cs *cs;
struct omap2_mcspi_device_config *cd;
int par_override = 0;
int status = 0;
u32 chconf;
- spi = m->spi;
master = spi->master;
mcspi_dma = mcspi->dma_channels + spi->chip_select;
cs = spi->controller_state;
@@ -1090,103 +1110,84 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
par_override = 1;
omap2_mcspi_set_enable(spi, 0);
- list_for_each_entry(t, &m->transfers, transfer_list) {
- if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
- status = -EINVAL;
- break;
- }
- if (par_override ||
- (t->speed_hz != spi->max_speed_hz) ||
- (t->bits_per_word != spi->bits_per_word)) {
- par_override = 1;
- status = omap2_mcspi_setup_transfer(spi, t);
- if (status < 0)
- break;
- if (t->speed_hz == spi->max_speed_hz &&
- t->bits_per_word == spi->bits_per_word)
- par_override = 0;
- }
- if (cd && cd->cs_per_word) {
- chconf = mcspi->ctx.modulctrl;
- chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
- mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
- mcspi->ctx.modulctrl =
- mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
- }
+ if (gpio_is_valid(spi->cs_gpio))
+ omap2_mcspi_set_cs(spi, spi->mode & SPI_CS_HIGH);
- if (!cs_active) {
- omap2_mcspi_force_cs(spi, 1);
- cs_active = 1;
- }
-
- chconf = mcspi_cached_chconf0(spi);
- chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
- chconf &= ~OMAP2_MCSPI_CHCONF_TURBO;
+ if (par_override ||
+ (t->speed_hz != spi->max_speed_hz) ||
+ (t->bits_per_word != spi->bits_per_word)) {
+ par_override = 1;
+ status = omap2_mcspi_setup_transfer(spi, t);
+ if (status < 0)
+ goto out;
+ if (t->speed_hz == spi->max_speed_hz &&
+ t->bits_per_word == spi->bits_per_word)
+ par_override = 0;
+ }
+ if (cd && cd->cs_per_word) {
+ chconf = mcspi->ctx.modulctrl;
+ chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
+ mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+ mcspi->ctx.modulctrl =
+ mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+ }
- if (t->tx_buf == NULL)
- chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY;
- else if (t->rx_buf == NULL)
- chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY;
-
- if (cd && cd->turbo_mode && t->tx_buf == NULL) {
- /* Turbo mode is for more than one word */
- if (t->len > ((cs->word_len + 7) >> 3))
- chconf |= OMAP2_MCSPI_CHCONF_TURBO;
- }
+ chconf = mcspi_cached_chconf0(spi);
+ chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
+ chconf &= ~OMAP2_MCSPI_CHCONF_TURBO;
+
+ if (t->tx_buf == NULL)
+ chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY;
+ else if (t->rx_buf == NULL)
+ chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY;
+
+ if (cd && cd->turbo_mode && t->tx_buf == NULL) {
+ /* Turbo mode is for more than one word */
+ if (t->len > ((cs->word_len + 7) >> 3))
+ chconf |= OMAP2_MCSPI_CHCONF_TURBO;
+ }
- mcspi_write_chconf0(spi, chconf);
+ mcspi_write_chconf0(spi, chconf);
- if (t->len) {
- unsigned count;
+ if (t->len) {
+ unsigned count;
- if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
- (m->is_dma_mapped || t->len >= DMA_MIN_BYTES))
- omap2_mcspi_set_fifo(spi, t, 1);
+ if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
+ (t->len >= DMA_MIN_BYTES))
+ omap2_mcspi_set_fifo(spi, t, 1);
- omap2_mcspi_set_enable(spi, 1);
+ omap2_mcspi_set_enable(spi, 1);
- /* RX_ONLY mode needs dummy data in TX reg */
- if (t->tx_buf == NULL)
- writel_relaxed(0, cs->base
- + OMAP2_MCSPI_TX0);
+ /* RX_ONLY mode needs dummy data in TX reg */
+ if (t->tx_buf == NULL)
+ writel_relaxed(0, cs->base
+ + OMAP2_MCSPI_TX0);
- if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
- (m->is_dma_mapped || t->len >= DMA_MIN_BYTES))
- count = omap2_mcspi_txrx_dma(spi, t);
- else
- count = omap2_mcspi_txrx_pio(spi, t);
- m->actual_length += count;
+ if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
+ (t->len >= DMA_MIN_BYTES))
+ count = omap2_mcspi_txrx_dma(spi, t);
+ else
+ count = omap2_mcspi_txrx_pio(spi, t);
- if (count != t->len) {
- status = -EIO;
- break;
- }
+ if (count != t->len) {
+ status = -EIO;
+ goto out;
}
+ }
- if (t->delay_usecs)
- udelay(t->delay_usecs);
-
- /* ignore the "leave it on after last xfer" hint */
- if (t->cs_change) {
- omap2_mcspi_force_cs(spi, 0);
- cs_active = 0;
- }
+ omap2_mcspi_set_enable(spi, 0);
- omap2_mcspi_set_enable(spi, 0);
+ if (mcspi->fifo_depth > 0)
+ omap2_mcspi_set_fifo(spi, t, 0);
- if (mcspi->fifo_depth > 0)
- omap2_mcspi_set_fifo(spi, t, 0);
- }
+out:
/* Restore defaults if they were overriden */
if (par_override) {
par_override = 0;
status = omap2_mcspi_setup_transfer(spi, NULL);
}
- if (cs_active)
- omap2_mcspi_force_cs(spi, 0);
-
if (cd && cd->cs_per_word) {
chconf = mcspi->ctx.modulctrl;
chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE;
@@ -1197,78 +1198,64 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
omap2_mcspi_set_enable(spi, 0);
+ if (gpio_is_valid(spi->cs_gpio))
+ omap2_mcspi_set_cs(spi, !(spi->mode & SPI_CS_HIGH));
+
if (mcspi->fifo_depth > 0 && t)
omap2_mcspi_set_fifo(spi, t, 0);
- m->status = status;
+ return status;
}
-static int omap2_mcspi_transfer_one_message(struct spi_master *master,
- struct spi_message *m)
+static int omap2_mcspi_transfer_one(struct spi_master *master,
+ struct spi_device *spi, struct spi_transfer *t)
{
- struct spi_device *spi;
struct omap2_mcspi *mcspi;
struct omap2_mcspi_dma *mcspi_dma;
- struct spi_transfer *t;
- int status;
+ const void *tx_buf = t->tx_buf;
+ void *rx_buf = t->rx_buf;
+ unsigned len = t->len;
- spi = m->spi;
mcspi = spi_master_get_devdata(master);
mcspi_dma = mcspi->dma_channels + spi->chip_select;
- m->actual_length = 0;
- m->status = 0;
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- const void *tx_buf = t->tx_buf;
- void *rx_buf = t->rx_buf;
- unsigned len = t->len;
-
- if ((len && !(rx_buf || tx_buf))) {
- dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
- t->speed_hz,
- len,
- tx_buf ? "tx" : "",
- rx_buf ? "rx" : "",
- t->bits_per_word);
- status = -EINVAL;
- goto out;
- }
- if (m->is_dma_mapped || len < DMA_MIN_BYTES)
- continue;
-
- if (mcspi_dma->dma_tx && tx_buf != NULL) {
- t->tx_dma = dma_map_single(mcspi->dev, (void *) tx_buf,
- len, DMA_TO_DEVICE);
- if (dma_mapping_error(mcspi->dev, t->tx_dma)) {
- dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
- 'T', len);
- status = -EINVAL;
- goto out;
- }
+ if ((len && !(rx_buf || tx_buf))) {
+ dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
+ t->speed_hz,
+ len,
+ tx_buf ? "tx" : "",
+ rx_buf ? "rx" : "",
+ t->bits_per_word);
+ return -EINVAL;
+ }
+
+ if (len < DMA_MIN_BYTES)
+ goto skip_dma_map;
+
+ if (mcspi_dma->dma_tx && tx_buf != NULL) {
+ t->tx_dma = dma_map_single(mcspi->dev, (void *) tx_buf,
+ len, DMA_TO_DEVICE);
+ if (dma_mapping_error(mcspi->dev, t->tx_dma)) {
+ dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
+ 'T', len);
+ return -EINVAL;
}
- if (mcspi_dma->dma_rx && rx_buf != NULL) {
- t->rx_dma = dma_map_single(mcspi->dev, rx_buf, t->len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(mcspi->dev, t->rx_dma)) {
- dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
- 'R', len);
- if (tx_buf != NULL)
- dma_unmap_single(mcspi->dev, t->tx_dma,
- len, DMA_TO_DEVICE);
- status = -EINVAL;
- goto out;
- }
+ }
+ if (mcspi_dma->dma_rx && rx_buf != NULL) {
+ t->rx_dma = dma_map_single(mcspi->dev, rx_buf, t->len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(mcspi->dev, t->rx_dma)) {
+ dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
+ 'R', len);
+ if (tx_buf != NULL)
+ dma_unmap_single(mcspi->dev, t->tx_dma,
+ len, DMA_TO_DEVICE);
+ return -EINVAL;
}
}
- omap2_mcspi_work(mcspi, m);
- /* spi_finalize_current_message() changes the status inside the
- * spi_message, save the status here. */
- status = m->status;
-out:
- spi_finalize_current_message(master);
- return status;
+skip_dma_map:
+ return omap2_mcspi_work_one(mcspi, spi, t);
}
static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
@@ -1347,7 +1334,8 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->setup = omap2_mcspi_setup;
master->auto_runtime_pm = true;
- master->transfer_one_message = omap2_mcspi_transfer_one_message;
+ master->transfer_one = omap2_mcspi_transfer_one;
+ master->set_cs = omap2_mcspi_set_cs;
master->cleanup = omap2_mcspi_cleanup;
master->dev.of_node = node;
master->max_speed_hz = OMAP2_MCSPI_MAX_FREQ;
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index ff97cabda..8cad107a5 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -391,7 +391,7 @@ static const struct orion_spi_dev orion_spi_dev_data = {
.prescale_mask = ORION_SPI_CLK_PRESCALE_MASK,
};
-static const struct orion_spi_dev armada_spi_dev_data = {
+static const struct orion_spi_dev armada_370_spi_dev_data = {
.typ = ARMADA_SPI,
.min_divisor = 4,
.max_divisor = 1920,
@@ -399,9 +399,46 @@ static const struct orion_spi_dev armada_spi_dev_data = {
.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
};
+static const struct orion_spi_dev armada_xp_spi_dev_data = {
+ .typ = ARMADA_SPI,
+ .max_hz = 50000000,
+ .max_divisor = 1920,
+ .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+};
+
+static const struct orion_spi_dev armada_375_spi_dev_data = {
+ .typ = ARMADA_SPI,
+ .min_divisor = 15,
+ .max_divisor = 1920,
+ .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+};
+
static const struct of_device_id orion_spi_of_match_table[] = {
- { .compatible = "marvell,orion-spi", .data = &orion_spi_dev_data, },
- { .compatible = "marvell,armada-370-spi", .data = &armada_spi_dev_data, },
+ {
+ .compatible = "marvell,orion-spi",
+ .data = &orion_spi_dev_data,
+ },
+ {
+ .compatible = "marvell,armada-370-spi",
+ .data = &armada_370_spi_dev_data,
+ },
+ {
+ .compatible = "marvell,armada-375-spi",
+ .data = &armada_375_spi_dev_data,
+ },
+ {
+ .compatible = "marvell,armada-380-spi",
+ .data = &armada_xp_spi_dev_data,
+ },
+ {
+ .compatible = "marvell,armada-390-spi",
+ .data = &armada_xp_spi_dev_data,
+ },
+ {
+ .compatible = "marvell,armada-xp-spi",
+ .data = &armada_xp_spi_dev_data,
+ },
+
{}
};
MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
@@ -473,9 +510,11 @@ static int orion_spi_probe(struct platform_device *pdev)
"marvell,armada-370-spi"))
master->max_speed_hz = min(devdata->max_hz,
DIV_ROUND_UP(tclk_hz, devdata->min_divisor));
- else
+ else if (devdata->min_divisor)
master->max_speed_hz =
DIV_ROUND_UP(tclk_hz, devdata->min_divisor);
+ else
+ master->max_speed_hz = devdata->max_hz;
master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index fa7399e84..3cfd43574 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -62,7 +62,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.max_clk_rate = 3686400,
},
[PORT_BYT] = {
- .type = LPSS_SSP,
+ .type = LPSS_BYT_SSP,
.port_id = 0,
.num_chipselect = 1,
.max_clk_rate = 50000000,
@@ -70,7 +70,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.rx_param = &byt_rx_param,
},
[PORT_BSW0] = {
- .type = LPSS_SSP,
+ .type = LPSS_BYT_SSP,
.port_id = 0,
.num_chipselect = 1,
.max_clk_rate = 50000000,
@@ -78,7 +78,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.rx_param = &bsw0_rx_param,
},
[PORT_BSW1] = {
- .type = LPSS_SSP,
+ .type = LPSS_BYT_SSP,
.port_id = 1,
.num_chipselect = 1,
.max_clk_rate = 50000000,
@@ -86,7 +86,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.rx_param = &bsw1_rx_param,
},
[PORT_BSW2] = {
- .type = LPSS_SSP,
+ .type = LPSS_BYT_SSP,
.port_id = 2,
.num_chipselect = 1,
.max_clk_rate = 50000000,
diff --git a/drivers/spi/spi-pxa2xx-pxadma.c b/drivers/spi/spi-pxa2xx-pxadma.c
deleted file mode 100644
index 2e0796a00..000000000
--- a/drivers/spi/spi-pxa2xx-pxadma.c
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
- * PXA2xx SPI private DMA support.
- *
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/pxa2xx_ssp.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <mach/dma.h>
-#include "spi-pxa2xx.h"
-
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-
-bool pxa2xx_spi_dma_is_possible(size_t len)
-{
- /* Try to map dma buffer and do a dma transfer if successful, but
- * only if the length is non-zero and less than MAX_DMA_LEN.
- *
- * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
- * of PIO instead. Care is needed above because the transfer may
- * have have been passed with buffers that are already dma mapped.
- * A zero-length transfer in PIO mode will not try to write/read
- * to/from the buffers
- *
- * REVISIT large transfers are exactly where we most want to be
- * using DMA. If this happens much, split those transfers into
- * multiple DMA segments rather than forcing PIO.
- */
- return len > 0 && len <= MAX_DMA_LEN;
-}
-
-int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
-{
- struct spi_message *msg = drv_data->cur_msg;
- struct device *dev = &msg->spi->dev;
-
- if (!drv_data->cur_chip->enable_dma)
- return 0;
-
- if (msg->is_dma_mapped)
- return drv_data->rx_dma && drv_data->tx_dma;
-
- if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
- return 0;
-
- /* Modify setup if rx buffer is null */
- if (drv_data->rx == NULL) {
- *drv_data->null_dma_buf = 0;
- drv_data->rx = drv_data->null_dma_buf;
- drv_data->rx_map_len = 4;
- } else
- drv_data->rx_map_len = drv_data->len;
-
-
- /* Modify setup if tx buffer is null */
- if (drv_data->tx == NULL) {
- *drv_data->null_dma_buf = 0;
- drv_data->tx = drv_data->null_dma_buf;
- drv_data->tx_map_len = 4;
- } else
- drv_data->tx_map_len = drv_data->len;
-
- /* Stream map the tx buffer. Always do DMA_TO_DEVICE first
- * so we flush the cache *before* invalidating it, in case
- * the tx and rx buffers overlap.
- */
- drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
- drv_data->tx_map_len, DMA_TO_DEVICE);
- if (dma_mapping_error(dev, drv_data->tx_dma))
- return 0;
-
- /* Stream map the rx buffer */
- drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
- drv_data->rx_map_len, DMA_FROM_DEVICE);
- if (dma_mapping_error(dev, drv_data->rx_dma)) {
- dma_unmap_single(dev, drv_data->tx_dma,
- drv_data->tx_map_len, DMA_TO_DEVICE);
- return 0;
- }
-
- return 1;
-}
-
-static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data)
-{
- struct device *dev;
-
- if (!drv_data->dma_mapped)
- return;
-
- if (!drv_data->cur_msg->is_dma_mapped) {
- dev = &drv_data->cur_msg->spi->dev;
- dma_unmap_single(dev, drv_data->rx_dma,
- drv_data->rx_map_len, DMA_FROM_DEVICE);
- dma_unmap_single(dev, drv_data->tx_dma,
- drv_data->tx_map_len, DMA_TO_DEVICE);
- }
-
- drv_data->dma_mapped = 0;
-}
-
-static int wait_ssp_rx_stall(struct driver_data *drv_data)
-{
- unsigned long limit = loops_per_jiffy << 1;
-
- while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY) && --limit)
- cpu_relax();
-
- return limit;
-}
-
-static int wait_dma_channel_stop(int channel)
-{
- unsigned long limit = loops_per_jiffy << 1;
-
- while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
- cpu_relax();
-
- return limit;
-}
-
-static void pxa2xx_spi_dma_error_stop(struct driver_data *drv_data,
- const char *msg)
-{
- /* Stop and reset */
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- write_SSSR_CS(drv_data, drv_data->clear_sr);
- pxa2xx_spi_write(drv_data, SSCR1,
- pxa2xx_spi_read(drv_data, SSCR1)
- & ~drv_data->dma_cr1);
- if (!pxa25x_ssp_comp(drv_data))
- pxa2xx_spi_write(drv_data, SSTO, 0);
- pxa2xx_spi_flush(drv_data);
- pxa2xx_spi_write(drv_data, SSCR0,
- pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
-
- pxa2xx_spi_unmap_dma_buffers(drv_data);
-
- dev_err(&drv_data->pdev->dev, "%s\n", msg);
-
- drv_data->cur_msg->state = ERROR_STATE;
- tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data)
-{
- struct spi_message *msg = drv_data->cur_msg;
-
- /* Clear and disable interrupts on SSP and DMA channels*/
- pxa2xx_spi_write(drv_data, SSCR1,
- pxa2xx_spi_read(drv_data, SSCR1)
- & ~drv_data->dma_cr1);
- write_SSSR_CS(drv_data, drv_data->clear_sr);
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
-
- if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_handler: dma rx channel stop failed\n");
-
- if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_transfer: ssp rx stall failed\n");
-
- pxa2xx_spi_unmap_dma_buffers(drv_data);
-
- /* update the buffer pointer for the amount completed in dma */
- drv_data->rx += drv_data->len -
- (DCMD(drv_data->rx_channel) & DCMD_LENGTH);
-
- /* read trailing data from fifo, it does not matter how many
- * bytes are in the fifo just read until buffer is full
- * or fifo is empty, which ever occurs first */
- drv_data->read(drv_data);
-
- /* return count of what was actually read */
- msg->actual_length += drv_data->len -
- (drv_data->rx_end - drv_data->rx);
-
- /* Transfer delays and chip select release are
- * handled in pump_transfers or giveback
- */
-
- /* Move to next transfer */
- msg->state = pxa2xx_spi_next_transfer(drv_data);
-
- /* Schedule transfer tasklet */
- tasklet_schedule(&drv_data->pump_transfers);
-}
-
-void pxa2xx_spi_dma_handler(int channel, void *data)
-{
- struct driver_data *drv_data = data;
- u32 irq_status = DCSR(channel) & DMA_INT_MASK;
-
- if (irq_status & DCSR_BUSERR) {
-
- if (channel == drv_data->tx_channel)
- pxa2xx_spi_dma_error_stop(drv_data,
- "dma_handler: bad bus address on tx channel");
- else
- pxa2xx_spi_dma_error_stop(drv_data,
- "dma_handler: bad bus address on rx channel");
- return;
- }
-
- /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
- if ((channel == drv_data->tx_channel)
- && (irq_status & DCSR_ENDINTR)
- && (drv_data->ssp_type == PXA25x_SSP)) {
-
- /* Wait for rx to stall */
- if (wait_ssp_rx_stall(drv_data) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_handler: ssp rx stall failed\n");
-
- /* finish this transfer, start the next */
- pxa2xx_spi_dma_transfer_complete(drv_data);
- }
-}
-
-irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
-{
- u32 irq_status;
-
- irq_status = pxa2xx_spi_read(drv_data, SSSR) & drv_data->mask_sr;
- if (irq_status & SSSR_ROR) {
- pxa2xx_spi_dma_error_stop(drv_data,
- "dma_transfer: fifo overrun");
- return IRQ_HANDLED;
- }
-
- /* Check for false positive timeout */
- if ((irq_status & SSSR_TINT)
- && (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
- pxa2xx_spi_write(drv_data, SSSR, SSSR_TINT);
- return IRQ_HANDLED;
- }
-
- if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
-
- /* Clear and disable timeout interrupt, do the rest in
- * dma_transfer_complete */
- if (!pxa25x_ssp_comp(drv_data))
- pxa2xx_spi_write(drv_data, SSTO, 0);
-
- /* finish this transfer, start the next */
- pxa2xx_spi_dma_transfer_complete(drv_data);
-
- return IRQ_HANDLED;
- }
-
- /* Opps problem detected */
- return IRQ_NONE;
-}
-
-int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
-{
- u32 dma_width;
-
- switch (drv_data->n_bytes) {
- case 1:
- dma_width = DCMD_WIDTH1;
- break;
- case 2:
- dma_width = DCMD_WIDTH2;
- break;
- default:
- dma_width = DCMD_WIDTH4;
- break;
- }
-
- /* Setup rx DMA Channel */
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
- DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
- DTADR(drv_data->rx_channel) = drv_data->rx_dma;
- if (drv_data->rx == drv_data->null_dma_buf)
- /* No target address increment */
- DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
- | dma_width
- | dma_burst
- | drv_data->len;
- else
- DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
- | DCMD_FLOWSRC
- | dma_width
- | dma_burst
- | drv_data->len;
-
- /* Setup tx DMA Channel */
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- DSADR(drv_data->tx_channel) = drv_data->tx_dma;
- DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
- if (drv_data->tx == drv_data->null_dma_buf)
- /* No source address increment */
- DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
- | dma_width
- | dma_burst
- | drv_data->len;
- else
- DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
- | DCMD_FLOWTRG
- | dma_width
- | dma_burst
- | drv_data->len;
-
- /* Enable dma end irqs on SSP to detect end of transfer */
- if (drv_data->ssp_type == PXA25x_SSP)
- DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
-
- return 0;
-}
-
-void pxa2xx_spi_dma_start(struct driver_data *drv_data)
-{
- DCSR(drv_data->rx_channel) |= DCSR_RUN;
- DCSR(drv_data->tx_channel) |= DCSR_RUN;
-}
-
-int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
-{
- struct device *dev = &drv_data->pdev->dev;
- struct ssp_device *ssp = drv_data->ssp;
-
- /* Get two DMA channels (rx and tx) */
- drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
- DMA_PRIO_HIGH,
- pxa2xx_spi_dma_handler,
- drv_data);
- if (drv_data->rx_channel < 0) {
- dev_err(dev, "problem (%d) requesting rx channel\n",
- drv_data->rx_channel);
- return -ENODEV;
- }
- drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
- DMA_PRIO_MEDIUM,
- pxa2xx_spi_dma_handler,
- drv_data);
- if (drv_data->tx_channel < 0) {
- dev_err(dev, "problem (%d) requesting tx channel\n",
- drv_data->tx_channel);
- pxa_free_dma(drv_data->rx_channel);
- return -ENODEV;
- }
-
- DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
- DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
-
- return 0;
-}
-
-void pxa2xx_spi_dma_release(struct driver_data *drv_data)
-{
- struct ssp_device *ssp = drv_data->ssp;
-
- DRCMR(ssp->drcmr_rx) = 0;
- DRCMR(ssp->drcmr_tx) = 0;
-
- if (drv_data->tx_channel != 0)
- pxa_free_dma(drv_data->tx_channel);
- if (drv_data->rx_channel != 0)
- pxa_free_dma(drv_data->rx_channel);
-}
-
-void pxa2xx_spi_dma_resume(struct driver_data *drv_data)
-{
- if (drv_data->rx_channel != -1)
- DRCMR(drv_data->ssp->drcmr_rx) =
- DRCMR_MAPVLD | drv_data->rx_channel;
- if (drv_data->tx_channel != -1)
- DRCMR(drv_data->ssp->drcmr_tx) =
- DRCMR_MAPVLD | drv_data->tx_channel;
-}
-
-int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
- struct spi_device *spi,
- u8 bits_per_word, u32 *burst_code,
- u32 *threshold)
-{
- struct pxa2xx_spi_chip *chip_info =
- (struct pxa2xx_spi_chip *)spi->controller_data;
- int bytes_per_word;
- int burst_bytes;
- int thresh_words;
- int req_burst_size;
- int retval = 0;
-
- /* Set the threshold (in registers) to equal the same amount of data
- * as represented by burst size (in bytes). The computation below
- * is (burst_size rounded up to nearest 8 byte, word or long word)
- * divided by (bytes/register); the tx threshold is the inverse of
- * the rx, so that there will always be enough data in the rx fifo
- * to satisfy a burst, and there will always be enough space in the
- * tx fifo to accept a burst (a tx burst will overwrite the fifo if
- * there is not enough space), there must always remain enough empty
- * space in the rx fifo for any data loaded to the tx fifo.
- * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
- * will be 8, or half the fifo;
- * The threshold can only be set to 2, 4 or 8, but not 16, because
- * to burst 16 to the tx fifo, the fifo would have to be empty;
- * however, the minimum fifo trigger level is 1, and the tx will
- * request service when the fifo is at this level, with only 15 spaces.
- */
-
- /* find bytes/word */
- if (bits_per_word <= 8)
- bytes_per_word = 1;
- else if (bits_per_word <= 16)
- bytes_per_word = 2;
- else
- bytes_per_word = 4;
-
- /* use struct pxa2xx_spi_chip->dma_burst_size if available */
- if (chip_info)
- req_burst_size = chip_info->dma_burst_size;
- else {
- switch (chip->dma_burst_size) {
- default:
- /* if the default burst size is not set,
- * do it now */
- chip->dma_burst_size = DCMD_BURST8;
- case DCMD_BURST8:
- req_burst_size = 8;
- break;
- case DCMD_BURST16:
- req_burst_size = 16;
- break;
- case DCMD_BURST32:
- req_burst_size = 32;
- break;
- }
- }
- if (req_burst_size <= 8) {
- *burst_code = DCMD_BURST8;
- burst_bytes = 8;
- } else if (req_burst_size <= 16) {
- if (bytes_per_word == 1) {
- /* don't burst more than 1/2 the fifo */
- *burst_code = DCMD_BURST8;
- burst_bytes = 8;
- retval = 1;
- } else {
- *burst_code = DCMD_BURST16;
- burst_bytes = 16;
- }
- } else {
- if (bytes_per_word == 1) {
- /* don't burst more than 1/2 the fifo */
- *burst_code = DCMD_BURST8;
- burst_bytes = 8;
- retval = 1;
- } else if (bytes_per_word == 2) {
- /* don't burst more than 1/2 the fifo */
- *burst_code = DCMD_BURST16;
- burst_bytes = 16;
- retval = 1;
- } else {
- *burst_code = DCMD_BURST32;
- burst_bytes = 32;
- }
- }
-
- thresh_words = burst_bytes / bytes_per_word;
-
- /* thresh_words will be between 2 and 8 */
- *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
- | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
-
- return retval;
-}
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index e3223ac75..7293d6d87 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -60,21 +60,60 @@ MODULE_ALIAS("platform:pxa2xx-spi");
| QUARK_X1000_SSCR1_TFT \
| SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
-#define LPSS_RX_THRESH_DFLT 64
-#define LPSS_TX_LOTHRESH_DFLT 160
-#define LPSS_TX_HITHRESH_DFLT 224
-
-/* Offset from drv_data->lpss_base */
-#define GENERAL_REG 0x08
#define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24)
-#define SSP_REG 0x0c
-#define SPI_CS_CONTROL 0x18
#define SPI_CS_CONTROL_SW_MODE BIT(0)
#define SPI_CS_CONTROL_CS_HIGH BIT(1)
+struct lpss_config {
+ /* LPSS offset from drv_data->ioaddr */
+ unsigned offset;
+ /* Register offsets from drv_data->lpss_base or -1 */
+ int reg_general;
+ int reg_ssp;
+ int reg_cs_ctrl;
+ /* FIFO thresholds */
+ u32 rx_threshold;
+ u32 tx_threshold_lo;
+ u32 tx_threshold_hi;
+};
+
+/* Keep these sorted with enum pxa_ssp_type */
+static const struct lpss_config lpss_platforms[] = {
+ { /* LPSS_LPT_SSP */
+ .offset = 0x800,
+ .reg_general = 0x08,
+ .reg_ssp = 0x0c,
+ .reg_cs_ctrl = 0x18,
+ .rx_threshold = 64,
+ .tx_threshold_lo = 160,
+ .tx_threshold_hi = 224,
+ },
+ { /* LPSS_BYT_SSP */
+ .offset = 0x400,
+ .reg_general = 0x08,
+ .reg_ssp = 0x0c,
+ .reg_cs_ctrl = 0x18,
+ .rx_threshold = 64,
+ .tx_threshold_lo = 160,
+ .tx_threshold_hi = 224,
+ },
+};
+
+static inline const struct lpss_config
+*lpss_get_config(const struct driver_data *drv_data)
+{
+ return &lpss_platforms[drv_data->ssp_type - LPSS_LPT_SSP];
+}
+
static bool is_lpss_ssp(const struct driver_data *drv_data)
{
- return drv_data->ssp_type == LPSS_SSP;
+ switch (drv_data->ssp_type) {
+ case LPSS_LPT_SSP:
+ case LPSS_BYT_SSP:
+ return true;
+ default:
+ return false;
+ }
}
static bool is_quark_x1000_ssp(const struct driver_data *drv_data)
@@ -192,63 +231,43 @@ static void __lpss_ssp_write_priv(struct driver_data *drv_data,
*/
static void lpss_ssp_setup(struct driver_data *drv_data)
{
- unsigned offset = 0x400;
- u32 value, orig;
-
- /*
- * Perform auto-detection of the LPSS SSP private registers. They
- * can be either at 1k or 2k offset from the base address.
- */
- orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-
- /* Test SPI_CS_CONTROL_SW_MODE bit enabling */
- value = orig | SPI_CS_CONTROL_SW_MODE;
- writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
- value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
- if (value != (orig | SPI_CS_CONTROL_SW_MODE)) {
- offset = 0x800;
- goto detection_done;
- }
-
- orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-
- /* Test SPI_CS_CONTROL_SW_MODE bit disabling */
- value = orig & ~SPI_CS_CONTROL_SW_MODE;
- writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
- value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
- if (value != (orig & ~SPI_CS_CONTROL_SW_MODE)) {
- offset = 0x800;
- goto detection_done;
- }
+ const struct lpss_config *config;
+ u32 value;
-detection_done:
- /* Now set the LPSS base */
- drv_data->lpss_base = drv_data->ioaddr + offset;
+ config = lpss_get_config(drv_data);
+ drv_data->lpss_base = drv_data->ioaddr + config->offset;
/* Enable software chip select control */
value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH;
- __lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+ __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
/* Enable multiblock DMA transfers */
if (drv_data->master_info->enable_dma) {
- __lpss_ssp_write_priv(drv_data, SSP_REG, 1);
-
- value = __lpss_ssp_read_priv(drv_data, GENERAL_REG);
- value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE;
- __lpss_ssp_write_priv(drv_data, GENERAL_REG, value);
+ __lpss_ssp_write_priv(drv_data, config->reg_ssp, 1);
+
+ if (config->reg_general >= 0) {
+ value = __lpss_ssp_read_priv(drv_data,
+ config->reg_general);
+ value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE;
+ __lpss_ssp_write_priv(drv_data,
+ config->reg_general, value);
+ }
}
}
static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
{
+ const struct lpss_config *config;
u32 value;
- value = __lpss_ssp_read_priv(drv_data, SPI_CS_CONTROL);
+ config = lpss_get_config(drv_data);
+
+ value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
if (enable)
value &= ~SPI_CS_CONTROL_CS_HIGH;
else
value |= SPI_CS_CONTROL_CS_HIGH;
- __lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+ __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
}
static void cs_assert(struct driver_data *drv_data)
@@ -1075,6 +1094,7 @@ static int setup(struct spi_device *spi)
{
struct pxa2xx_spi_chip *chip_info = NULL;
struct chip_data *chip;
+ const struct lpss_config *config;
struct driver_data *drv_data = spi_master_get_devdata(spi->master);
unsigned int clk_div;
uint tx_thres, tx_hi_thres, rx_thres;
@@ -1085,10 +1105,12 @@ static int setup(struct spi_device *spi)
tx_hi_thres = 0;
rx_thres = RX_THRESH_QUARK_X1000_DFLT;
break;
- case LPSS_SSP:
- tx_thres = LPSS_TX_LOTHRESH_DFLT;
- tx_hi_thres = LPSS_TX_HITHRESH_DFLT;
- rx_thres = LPSS_RX_THRESH_DFLT;
+ case LPSS_LPT_SSP:
+ case LPSS_BYT_SSP:
+ config = lpss_get_config(drv_data);
+ tx_thres = config->tx_threshold_lo;
+ tx_hi_thres = config->tx_threshold_hi;
+ rx_thres = config->rx_threshold;
break;
default:
tx_thres = TX_THRESH_DFLT;
@@ -1242,6 +1264,18 @@ static void cleanup(struct spi_device *spi)
}
#ifdef CONFIG_ACPI
+
+static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
+ { "INT33C0", LPSS_LPT_SSP },
+ { "INT33C1", LPSS_LPT_SSP },
+ { "INT3430", LPSS_LPT_SSP },
+ { "INT3431", LPSS_LPT_SSP },
+ { "80860F0E", LPSS_BYT_SSP },
+ { "8086228E", LPSS_BYT_SSP },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
+
static struct pxa2xx_spi_master *
pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
{
@@ -1249,12 +1283,19 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
struct acpi_device *adev;
struct ssp_device *ssp;
struct resource *res;
- int devid;
+ const struct acpi_device_id *id;
+ int devid, type;
if (!ACPI_HANDLE(&pdev->dev) ||
acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
return NULL;
+ id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+ if (id)
+ type = (int)id->driver_data;
+ else
+ return NULL;
+
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
@@ -1272,7 +1313,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
ssp->clk = devm_clk_get(&pdev->dev, NULL);
ssp->irq = platform_get_irq(pdev, 0);
- ssp->type = LPSS_SSP;
+ ssp->type = type;
ssp->pdev = pdev;
ssp->port_id = -1;
@@ -1285,16 +1326,6 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
return pdata;
}
-static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
- { "INT33C0", 0 },
- { "INT33C1", 0 },
- { "INT3430", 0 },
- { "INT3431", 0 },
- { "80860F0E", 0 },
- { "8086228E", 0 },
- { },
-};
-MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
#else
static inline struct pxa2xx_spi_master *
pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h
index 85a58c906..9f01e9c9a 100644
--- a/drivers/spi/spi-pxa2xx.h
+++ b/drivers/spi/spi-pxa2xx.h
@@ -162,11 +162,7 @@ extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data);
/*
* Select the right DMA implementation.
*/
-#if defined(CONFIG_SPI_PXA2XX_PXADMA)
-#define SPI_PXA2XX_USE_DMA 1
-#define MAX_DMA_LEN 8191
-#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE)
-#elif defined(CONFIG_SPI_PXA2XX_DMA)
+#if defined(CONFIG_SPI_PXA2XX_DMA)
#define SPI_PXA2XX_USE_DMA 1
#define MAX_DMA_LEN SZ_64K
#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL)
diff --git a/drivers/spi/spi-rb4xx.c b/drivers/spi/spi-rb4xx.c
new file mode 100644
index 000000000..3641d0e20
--- /dev/null
+++ b/drivers/spi/spi-rb4xx.c
@@ -0,0 +1,210 @@
+/*
+ * SPI controller driver for the Mikrotik RB4xx boards
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2015 Bert Vermeulen <bert@biot.com>
+ *
+ * This file was based on the patches for Linux 2.6.27.39 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+struct rb4xx_spi {
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static inline u32 rb4xx_read(struct rb4xx_spi *rbspi, u32 reg)
+{
+ return __raw_readl(rbspi->base + reg);
+}
+
+static inline void rb4xx_write(struct rb4xx_spi *rbspi, u32 reg, u32 value)
+{
+ __raw_writel(value, rbspi->base + reg);
+}
+
+static inline void do_spi_clk(struct rb4xx_spi *rbspi, u32 spi_ioc, int value)
+{
+ u32 regval;
+
+ regval = spi_ioc;
+ if (value & BIT(0))
+ regval |= AR71XX_SPI_IOC_DO;
+
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
+}
+
+static void do_spi_byte(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
+{
+ int i;
+
+ for (i = 7; i >= 0; i--)
+ do_spi_clk(rbspi, spi_ioc, byte >> i);
+}
+
+/* The CS2 pin is used to clock in a second bit per clock cycle. */
+static inline void do_spi_clk_two(struct rb4xx_spi *rbspi, u32 spi_ioc,
+ u8 value)
+{
+ u32 regval;
+
+ regval = spi_ioc;
+ if (value & BIT(1))
+ regval |= AR71XX_SPI_IOC_DO;
+ if (value & BIT(0))
+ regval |= AR71XX_SPI_IOC_CS2;
+
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
+}
+
+/* Two bits at a time, msb first */
+static void do_spi_byte_two(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
+{
+ do_spi_clk_two(rbspi, spi_ioc, byte >> 6);
+ do_spi_clk_two(rbspi, spi_ioc, byte >> 4);
+ do_spi_clk_two(rbspi, spi_ioc, byte >> 2);
+ do_spi_clk_two(rbspi, spi_ioc, byte >> 0);
+}
+
+static void rb4xx_set_cs(struct spi_device *spi, bool enable)
+{
+ struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
+
+ /*
+ * Setting CS is done along with bitbanging the actual values,
+ * since it's all on the same hardware register. However the
+ * CPLD needs CS deselected after every command.
+ */
+ if (enable)
+ rb4xx_write(rbspi, AR71XX_SPI_REG_IOC,
+ AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1);
+}
+
+static int rb4xx_transfer_one(struct spi_master *master,
+ struct spi_device *spi, struct spi_transfer *t)
+{
+ struct rb4xx_spi *rbspi = spi_master_get_devdata(master);
+ int i;
+ u32 spi_ioc;
+ u8 *rx_buf;
+ const u8 *tx_buf;
+
+ /*
+ * Prime the SPI register with the SPI device selected. The m25p80 boot
+ * flash and CPLD share the CS0 pin. This works because the CPLD's
+ * command set was designed to almost not clash with that of the
+ * boot flash.
+ */
+ if (spi->chip_select == 2)
+ /* MMC */
+ spi_ioc = AR71XX_SPI_IOC_CS0;
+ else
+ /* Boot flash and CPLD */
+ spi_ioc = AR71XX_SPI_IOC_CS1;
+
+ tx_buf = t->tx_buf;
+ rx_buf = t->rx_buf;
+ for (i = 0; i < t->len; ++i) {
+ if (t->tx_nbits == SPI_NBITS_DUAL)
+ /* CPLD can use two-wire transfers */
+ do_spi_byte_two(rbspi, spi_ioc, tx_buf[i]);
+ else
+ do_spi_byte(rbspi, spi_ioc, tx_buf[i]);
+ if (!rx_buf)
+ continue;
+ rx_buf[i] = rb4xx_read(rbspi, AR71XX_SPI_REG_RDS);
+ }
+ spi_finalize_current_transfer(master);
+
+ return 0;
+}
+
+static int rb4xx_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct clk *ahb_clk;
+ struct rb4xx_spi *rbspi;
+ struct resource *r;
+ int err;
+ void __iomem *spi_base;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ spi_base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(spi_base))
+ return PTR_ERR(spi_base);
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*rbspi));
+ if (!master)
+ return -ENOMEM;
+
+ ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(ahb_clk))
+ return PTR_ERR(ahb_clk);
+
+ master->bus_num = 0;
+ master->num_chipselect = 3;
+ master->mode_bits = SPI_TX_DUAL;
+ master->bits_per_word_mask = BIT(7);
+ master->flags = SPI_MASTER_MUST_TX;
+ master->transfer_one = rb4xx_transfer_one;
+ master->set_cs = rb4xx_set_cs;
+
+ err = devm_spi_register_master(&pdev->dev, master);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register SPI master\n");
+ return err;
+ }
+
+ err = clk_prepare_enable(ahb_clk);
+ if (err)
+ return err;
+
+ rbspi = spi_master_get_devdata(master);
+ rbspi->base = spi_base;
+ rbspi->clk = ahb_clk;
+ platform_set_drvdata(pdev, rbspi);
+
+ /* Enable SPI */
+ rb4xx_write(rbspi, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
+
+ return 0;
+}
+
+static int rb4xx_spi_remove(struct platform_device *pdev)
+{
+ struct rb4xx_spi *rbspi = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(rbspi->clk);
+
+ return 0;
+}
+
+static struct platform_driver rb4xx_spi_drv = {
+ .probe = rb4xx_spi_probe,
+ .remove = rb4xx_spi_remove,
+ .driver = {
+ .name = "rb4xx-spi",
+ },
+};
+
+module_platform_driver(rb4xx_spi_drv);
+
+MODULE_DESCRIPTION("Mikrotik RB4xx SPI controller driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index f6bac9e77..f9189a0c8 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -665,15 +665,12 @@ static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
struct spi_transfer *xfer)
{
- if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
- /* rx_buf can be NULL on RSPI on SH in TX-only Mode */
- int ret = rspi_dma_transfer(rspi, &xfer->tx_sg,
- xfer->rx_buf ? &xfer->rx_sg : NULL);
- if (ret != -EAGAIN)
- return 0;
- }
+ if (!rspi->master->can_dma || !__rspi_can_dma(rspi, xfer))
+ return -EAGAIN;
- return -EAGAIN;
+ /* rx_buf can be NULL on RSPI on SH in TX-only Mode */
+ return rspi_dma_transfer(rspi, &xfer->tx_sg,
+ xfer->rx_buf ? &xfer->rx_sg : NULL);
}
static int rspi_common_transfer(struct rspi_data *rspi,
@@ -724,7 +721,7 @@ static int rspi_rz_transfer_one(struct spi_master *master,
return rspi_common_transfer(rspi, xfer);
}
-static int qspi_trigger_transfer_out_int(struct rspi_data *rspi, const u8 *tx,
+static int qspi_trigger_transfer_out_in(struct rspi_data *rspi, const u8 *tx,
u8 *rx, unsigned int len)
{
int i, n, ret;
@@ -771,12 +768,8 @@ static int qspi_transfer_out_in(struct rspi_data *rspi,
if (ret != -EAGAIN)
return ret;
- ret = qspi_trigger_transfer_out_int(rspi, xfer->tx_buf,
+ return qspi_trigger_transfer_out_in(rspi, xfer->tx_buf,
xfer->rx_buf, xfer->len);
- if (ret < 0)
- return ret;
-
- return 0;
}
static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
@@ -1300,7 +1293,7 @@ error1:
return ret;
}
-static struct platform_device_id spi_driver_ids[] = {
+static const struct platform_device_id spi_driver_ids[] = {
{ "rspi", (kernel_ulong_t)&rspi_ops },
{ "rspi-rz", (kernel_ulong_t)&rspi_rz_ops },
{ "qspi", (kernel_ulong_t)&qspi_ops },
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index b1c6731fb..2a8c513c4 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1347,7 +1347,7 @@ static struct s3c64xx_spi_port_config exynos7_spi_port_config = {
.quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
};
-static struct platform_device_id s3c64xx_spi_driver_ids[] = {
+static const struct platform_device_id s3c64xx_spi_driver_ids[] = {
{
.name = "s3c2443-spi",
.driver_data = (kernel_ulong_t)&s3c2443_spi_port_config,
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index bcc7c635d..d3370a612 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -1263,7 +1263,7 @@ static int sh_msiof_spi_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_device_id spi_driver_ids[] = {
+static const struct platform_device_id spi_driver_ids[] = {
{ "spi_sh_msiof", (kernel_ulong_t)&sh_data },
{ "spi_r8a7790_msiof", (kernel_ulong_t)&r8a779x_data },
{ "spi_r8a7791_msiof", (kernel_ulong_t)&r8a779x_data },
diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c
index f5715c9f6..7072276ad 100644
--- a/drivers/spi/spi-sirf.c
+++ b/drivers/spi/spi-sirf.c
@@ -26,28 +26,6 @@
#include <linux/reset.h>
#define DRIVER_NAME "sirfsoc_spi"
-
-#define SIRFSOC_SPI_CTRL 0x0000
-#define SIRFSOC_SPI_CMD 0x0004
-#define SIRFSOC_SPI_TX_RX_EN 0x0008
-#define SIRFSOC_SPI_INT_EN 0x000C
-#define SIRFSOC_SPI_INT_STATUS 0x0010
-#define SIRFSOC_SPI_TX_DMA_IO_CTRL 0x0100
-#define SIRFSOC_SPI_TX_DMA_IO_LEN 0x0104
-#define SIRFSOC_SPI_TXFIFO_CTRL 0x0108
-#define SIRFSOC_SPI_TXFIFO_LEVEL_CHK 0x010C
-#define SIRFSOC_SPI_TXFIFO_OP 0x0110
-#define SIRFSOC_SPI_TXFIFO_STATUS 0x0114
-#define SIRFSOC_SPI_TXFIFO_DATA 0x0118
-#define SIRFSOC_SPI_RX_DMA_IO_CTRL 0x0120
-#define SIRFSOC_SPI_RX_DMA_IO_LEN 0x0124
-#define SIRFSOC_SPI_RXFIFO_CTRL 0x0128
-#define SIRFSOC_SPI_RXFIFO_LEVEL_CHK 0x012C
-#define SIRFSOC_SPI_RXFIFO_OP 0x0130
-#define SIRFSOC_SPI_RXFIFO_STATUS 0x0134
-#define SIRFSOC_SPI_RXFIFO_DATA 0x0138
-#define SIRFSOC_SPI_DUMMY_DELAY_CTL 0x0144
-
/* SPI CTRL register defines */
#define SIRFSOC_SPI_SLV_MODE BIT(16)
#define SIRFSOC_SPI_CMD_MODE BIT(17)
@@ -80,8 +58,6 @@
#define SIRFSOC_SPI_TXFIFO_THD_INT_EN BIT(9)
#define SIRFSOC_SPI_FRM_END_INT_EN BIT(10)
-#define SIRFSOC_SPI_INT_MASK_ALL 0x1FFF
-
/* Interrupt status */
#define SIRFSOC_SPI_RX_DONE BIT(0)
#define SIRFSOC_SPI_TX_DONE BIT(1)
@@ -110,20 +86,66 @@
#define SIRFSOC_SPI_FIFO_WIDTH_BYTE (0 << 0)
#define SIRFSOC_SPI_FIFO_WIDTH_WORD (1 << 0)
#define SIRFSOC_SPI_FIFO_WIDTH_DWORD (2 << 0)
-
-/* FIFO Status */
-#define SIRFSOC_SPI_FIFO_LEVEL_MASK 0xFF
-#define SIRFSOC_SPI_FIFO_FULL BIT(8)
-#define SIRFSOC_SPI_FIFO_EMPTY BIT(9)
-
-/* 256 bytes rx/tx FIFO */
-#define SIRFSOC_SPI_FIFO_SIZE 256
-#define SIRFSOC_SPI_DAT_FRM_LEN_MAX (64 * 1024)
-
-#define SIRFSOC_SPI_FIFO_SC(x) ((x) & 0x3F)
-#define SIRFSOC_SPI_FIFO_LC(x) (((x) & 0x3F) << 10)
-#define SIRFSOC_SPI_FIFO_HC(x) (((x) & 0x3F) << 20)
-#define SIRFSOC_SPI_FIFO_THD(x) (((x) & 0xFF) << 2)
+/* USP related */
+#define SIRFSOC_USP_SYNC_MODE BIT(0)
+#define SIRFSOC_USP_SLV_MODE BIT(1)
+#define SIRFSOC_USP_LSB BIT(4)
+#define SIRFSOC_USP_EN BIT(5)
+#define SIRFSOC_USP_RXD_FALLING_EDGE BIT(6)
+#define SIRFSOC_USP_TXD_FALLING_EDGE BIT(7)
+#define SIRFSOC_USP_CS_HIGH_VALID BIT(9)
+#define SIRFSOC_USP_SCLK_IDLE_STAT BIT(11)
+#define SIRFSOC_USP_TFS_IO_MODE BIT(14)
+#define SIRFSOC_USP_TFS_IO_INPUT BIT(19)
+
+#define SIRFSOC_USP_RXD_DELAY_LEN_MASK 0xFF
+#define SIRFSOC_USP_TXD_DELAY_LEN_MASK 0xFF
+#define SIRFSOC_USP_RXD_DELAY_OFFSET 0
+#define SIRFSOC_USP_TXD_DELAY_OFFSET 8
+#define SIRFSOC_USP_RXD_DELAY_LEN 1
+#define SIRFSOC_USP_TXD_DELAY_LEN 1
+#define SIRFSOC_USP_CLK_DIVISOR_OFFSET 21
+#define SIRFSOC_USP_CLK_DIVISOR_MASK 0x3FF
+#define SIRFSOC_USP_CLK_10_11_MASK 0x3
+#define SIRFSOC_USP_CLK_10_11_OFFSET 30
+#define SIRFSOC_USP_CLK_12_15_MASK 0xF
+#define SIRFSOC_USP_CLK_12_15_OFFSET 24
+
+#define SIRFSOC_USP_TX_DATA_OFFSET 0
+#define SIRFSOC_USP_TX_SYNC_OFFSET 8
+#define SIRFSOC_USP_TX_FRAME_OFFSET 16
+#define SIRFSOC_USP_TX_SHIFTER_OFFSET 24
+
+#define SIRFSOC_USP_TX_DATA_MASK 0xFF
+#define SIRFSOC_USP_TX_SYNC_MASK 0xFF
+#define SIRFSOC_USP_TX_FRAME_MASK 0xFF
+#define SIRFSOC_USP_TX_SHIFTER_MASK 0x1F
+
+#define SIRFSOC_USP_RX_DATA_OFFSET 0
+#define SIRFSOC_USP_RX_FRAME_OFFSET 8
+#define SIRFSOC_USP_RX_SHIFTER_OFFSET 16
+
+#define SIRFSOC_USP_RX_DATA_MASK 0xFF
+#define SIRFSOC_USP_RX_FRAME_MASK 0xFF
+#define SIRFSOC_USP_RX_SHIFTER_MASK 0x1F
+#define SIRFSOC_USP_CS_HIGH_VALUE BIT(1)
+
+#define SIRFSOC_SPI_FIFO_SC_OFFSET 0
+#define SIRFSOC_SPI_FIFO_LC_OFFSET 10
+#define SIRFSOC_SPI_FIFO_HC_OFFSET 20
+
+#define SIRFSOC_SPI_FIFO_FULL_MASK(s) (1 << ((s)->fifo_full_offset))
+#define SIRFSOC_SPI_FIFO_EMPTY_MASK(s) (1 << ((s)->fifo_full_offset + 1))
+#define SIRFSOC_SPI_FIFO_THD_MASK(s) ((s)->fifo_size - 1)
+#define SIRFSOC_SPI_FIFO_THD_OFFSET 2
+#define SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(s, val) \
+ ((val) & (s)->fifo_level_chk_mask)
+
+enum sirf_spi_type {
+ SIRF_REAL_SPI,
+ SIRF_USP_SPI_P2,
+ SIRF_USP_SPI_A7,
+};
/*
* only if the rx/tx buffer and transfer size are 4-bytes aligned, we use dma
@@ -137,6 +159,95 @@
#define SIRFSOC_MAX_CMD_BYTES 4
#define SIRFSOC_SPI_DEFAULT_FRQ 1000000
+struct sirf_spi_register {
+ /*SPI and USP-SPI common*/
+ u32 tx_rx_en;
+ u32 int_en;
+ u32 int_st;
+ u32 tx_dma_io_ctrl;
+ u32 tx_dma_io_len;
+ u32 txfifo_ctrl;
+ u32 txfifo_level_chk;
+ u32 txfifo_op;
+ u32 txfifo_st;
+ u32 txfifo_data;
+ u32 rx_dma_io_ctrl;
+ u32 rx_dma_io_len;
+ u32 rxfifo_ctrl;
+ u32 rxfifo_level_chk;
+ u32 rxfifo_op;
+ u32 rxfifo_st;
+ u32 rxfifo_data;
+ /*SPI self*/
+ u32 spi_ctrl;
+ u32 spi_cmd;
+ u32 spi_dummy_delay_ctrl;
+ /*USP-SPI self*/
+ u32 usp_mode1;
+ u32 usp_mode2;
+ u32 usp_tx_frame_ctrl;
+ u32 usp_rx_frame_ctrl;
+ u32 usp_pin_io_data;
+ u32 usp_risc_dsp_mode;
+ u32 usp_async_param_reg;
+ u32 usp_irda_x_mode_div;
+ u32 usp_sm_cfg;
+ u32 usp_int_en_clr;
+};
+
+static const struct sirf_spi_register real_spi_register = {
+ .tx_rx_en = 0x8,
+ .int_en = 0xc,
+ .int_st = 0x10,
+ .tx_dma_io_ctrl = 0x100,
+ .tx_dma_io_len = 0x104,
+ .txfifo_ctrl = 0x108,
+ .txfifo_level_chk = 0x10c,
+ .txfifo_op = 0x110,
+ .txfifo_st = 0x114,
+ .txfifo_data = 0x118,
+ .rx_dma_io_ctrl = 0x120,
+ .rx_dma_io_len = 0x124,
+ .rxfifo_ctrl = 0x128,
+ .rxfifo_level_chk = 0x12c,
+ .rxfifo_op = 0x130,
+ .rxfifo_st = 0x134,
+ .rxfifo_data = 0x138,
+ .spi_ctrl = 0x0,
+ .spi_cmd = 0x4,
+ .spi_dummy_delay_ctrl = 0x144,
+};
+
+static const struct sirf_spi_register usp_spi_register = {
+ .tx_rx_en = 0x10,
+ .int_en = 0x14,
+ .int_st = 0x18,
+ .tx_dma_io_ctrl = 0x100,
+ .tx_dma_io_len = 0x104,
+ .txfifo_ctrl = 0x108,
+ .txfifo_level_chk = 0x10c,
+ .txfifo_op = 0x110,
+ .txfifo_st = 0x114,
+ .txfifo_data = 0x118,
+ .rx_dma_io_ctrl = 0x120,
+ .rx_dma_io_len = 0x124,
+ .rxfifo_ctrl = 0x128,
+ .rxfifo_level_chk = 0x12c,
+ .rxfifo_op = 0x130,
+ .rxfifo_st = 0x134,
+ .rxfifo_data = 0x138,
+ .usp_mode1 = 0x0,
+ .usp_mode2 = 0x4,
+ .usp_tx_frame_ctrl = 0x8,
+ .usp_rx_frame_ctrl = 0xc,
+ .usp_pin_io_data = 0x1c,
+ .usp_risc_dsp_mode = 0x20,
+ .usp_async_param_reg = 0x24,
+ .usp_irda_x_mode_div = 0x28,
+ .usp_sm_cfg = 0x2c,
+ .usp_int_en_clr = 0x140,
+};
+
struct sirfsoc_spi {
struct spi_bitbang bitbang;
struct completion rx_done;
@@ -164,7 +275,6 @@ struct sirfsoc_spi {
struct dma_chan *tx_chan;
dma_addr_t src_start;
dma_addr_t dst_start;
- void *dummypage;
int word_width; /* in bytes */
/*
@@ -173,14 +283,39 @@ struct sirfsoc_spi {
*/
bool tx_by_cmd;
bool hw_cs;
+ enum sirf_spi_type type;
+ const struct sirf_spi_register *regs;
+ unsigned int fifo_size;
+ /* fifo empty offset is (fifo full offset + 1)*/
+ unsigned int fifo_full_offset;
+ /* fifo_level_chk_mask is (fifo_size/4 - 1) */
+ unsigned int fifo_level_chk_mask;
+ unsigned int dat_max_frm_len;
+};
+
+struct sirf_spi_comp_data {
+ const struct sirf_spi_register *regs;
+ enum sirf_spi_type type;
+ unsigned int dat_max_frm_len;
+ unsigned int fifo_size;
+ void (*hwinit)(struct sirfsoc_spi *sspi);
};
+static void sirfsoc_usp_hwinit(struct sirfsoc_spi *sspi)
+{
+ /* reset USP and let USP can operate */
+ writel(readl(sspi->base + sspi->regs->usp_mode1) &
+ ~SIRFSOC_USP_EN, sspi->base + sspi->regs->usp_mode1);
+ writel(readl(sspi->base + sspi->regs->usp_mode1) |
+ SIRFSOC_USP_EN, sspi->base + sspi->regs->usp_mode1);
+}
+
static void spi_sirfsoc_rx_word_u8(struct sirfsoc_spi *sspi)
{
u32 data;
u8 *rx = sspi->rx;
- data = readl(sspi->base + SIRFSOC_SPI_RXFIFO_DATA);
+ data = readl(sspi->base + sspi->regs->rxfifo_data);
if (rx) {
*rx++ = (u8) data;
@@ -199,8 +334,7 @@ static void spi_sirfsoc_tx_word_u8(struct sirfsoc_spi *sspi)
data = *tx++;
sspi->tx = tx;
}
-
- writel(data, sspi->base + SIRFSOC_SPI_TXFIFO_DATA);
+ writel(data, sspi->base + sspi->regs->txfifo_data);
sspi->left_tx_word--;
}
@@ -209,7 +343,7 @@ static void spi_sirfsoc_rx_word_u16(struct sirfsoc_spi *sspi)
u32 data;
u16 *rx = sspi->rx;
- data = readl(sspi->base + SIRFSOC_SPI_RXFIFO_DATA);
+ data = readl(sspi->base + sspi->regs->rxfifo_data);
if (rx) {
*rx++ = (u16) data;
@@ -229,7 +363,7 @@ static void spi_sirfsoc_tx_word_u16(struct sirfsoc_spi *sspi)
sspi->tx = tx;
}
- writel(data, sspi->base + SIRFSOC_SPI_TXFIFO_DATA);
+ writel(data, sspi->base + sspi->regs->txfifo_data);
sspi->left_tx_word--;
}
@@ -238,7 +372,7 @@ static void spi_sirfsoc_rx_word_u32(struct sirfsoc_spi *sspi)
u32 data;
u32 *rx = sspi->rx;
- data = readl(sspi->base + SIRFSOC_SPI_RXFIFO_DATA);
+ data = readl(sspi->base + sspi->regs->rxfifo_data);
if (rx) {
*rx++ = (u32) data;
@@ -259,41 +393,59 @@ static void spi_sirfsoc_tx_word_u32(struct sirfsoc_spi *sspi)
sspi->tx = tx;
}
- writel(data, sspi->base + SIRFSOC_SPI_TXFIFO_DATA);
+ writel(data, sspi->base + sspi->regs->txfifo_data);
sspi->left_tx_word--;
}
static irqreturn_t spi_sirfsoc_irq(int irq, void *dev_id)
{
struct sirfsoc_spi *sspi = dev_id;
- u32 spi_stat = readl(sspi->base + SIRFSOC_SPI_INT_STATUS);
- if (sspi->tx_by_cmd && (spi_stat & SIRFSOC_SPI_FRM_END)) {
+ u32 spi_stat;
+
+ spi_stat = readl(sspi->base + sspi->regs->int_st);
+ if (sspi->tx_by_cmd && sspi->type == SIRF_REAL_SPI
+ && (spi_stat & SIRFSOC_SPI_FRM_END)) {
complete(&sspi->tx_done);
- writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
- writel(SIRFSOC_SPI_INT_MASK_ALL,
- sspi->base + SIRFSOC_SPI_INT_STATUS);
+ writel(0x0, sspi->base + sspi->regs->int_en);
+ writel(readl(sspi->base + sspi->regs->int_st),
+ sspi->base + sspi->regs->int_st);
return IRQ_HANDLED;
}
-
/* Error Conditions */
if (spi_stat & SIRFSOC_SPI_RX_OFLOW ||
spi_stat & SIRFSOC_SPI_TX_UFLOW) {
complete(&sspi->tx_done);
complete(&sspi->rx_done);
- writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
- writel(SIRFSOC_SPI_INT_MASK_ALL,
- sspi->base + SIRFSOC_SPI_INT_STATUS);
+ switch (sspi->type) {
+ case SIRF_REAL_SPI:
+ case SIRF_USP_SPI_P2:
+ writel(0x0, sspi->base + sspi->regs->int_en);
+ break;
+ case SIRF_USP_SPI_A7:
+ writel(~0UL, sspi->base + sspi->regs->usp_int_en_clr);
+ break;
+ }
+ writel(readl(sspi->base + sspi->regs->int_st),
+ sspi->base + sspi->regs->int_st);
return IRQ_HANDLED;
}
if (spi_stat & SIRFSOC_SPI_TXFIFO_EMPTY)
complete(&sspi->tx_done);
- while (!(readl(sspi->base + SIRFSOC_SPI_INT_STATUS) &
+ while (!(readl(sspi->base + sspi->regs->int_st) &
SIRFSOC_SPI_RX_IO_DMA))
cpu_relax();
complete(&sspi->rx_done);
- writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
- writel(SIRFSOC_SPI_INT_MASK_ALL,
- sspi->base + SIRFSOC_SPI_INT_STATUS);
+ switch (sspi->type) {
+ case SIRF_REAL_SPI:
+ case SIRF_USP_SPI_P2:
+ writel(0x0, sspi->base + sspi->regs->int_en);
+ break;
+ case SIRF_USP_SPI_A7:
+ writel(~0UL, sspi->base + sspi->regs->usp_int_en_clr);
+ break;
+ }
+ writel(readl(sspi->base + sspi->regs->int_st),
+ sspi->base + sspi->regs->int_st);
return IRQ_HANDLED;
}
@@ -313,8 +465,8 @@ static void spi_sirfsoc_cmd_transfer(struct spi_device *spi,
u32 cmd;
sspi = spi_master_get_devdata(spi->master);
- writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
+ writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->txfifo_op);
+ writel(SIRFSOC_SPI_FIFO_START, sspi->base + sspi->regs->txfifo_op);
memcpy(&cmd, sspi->tx, t->len);
if (sspi->word_width == 1 && !(spi->mode & SPI_LSB_FIRST))
cmd = cpu_to_be32(cmd) >>
@@ -322,11 +474,11 @@ static void spi_sirfsoc_cmd_transfer(struct spi_device *spi,
if (sspi->word_width == 2 && t->len == 4 &&
(!(spi->mode & SPI_LSB_FIRST)))
cmd = ((cmd & 0xffff) << 16) | (cmd >> 16);
- writel(cmd, sspi->base + SIRFSOC_SPI_CMD);
+ writel(cmd, sspi->base + sspi->regs->spi_cmd);
writel(SIRFSOC_SPI_FRM_END_INT_EN,
- sspi->base + SIRFSOC_SPI_INT_EN);
+ sspi->base + sspi->regs->int_en);
writel(SIRFSOC_SPI_CMD_TX_EN,
- sspi->base + SIRFSOC_SPI_TX_RX_EN);
+ sspi->base + sspi->regs->tx_rx_en);
if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) {
dev_err(&spi->dev, "cmd transfer timeout\n");
return;
@@ -342,25 +494,56 @@ static void spi_sirfsoc_dma_transfer(struct spi_device *spi,
int timeout = t->len * 10;
sspi = spi_master_get_devdata(spi->master);
- writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- writel(0, sspi->base + SIRFSOC_SPI_INT_EN);
- writel(SIRFSOC_SPI_INT_MASK_ALL, sspi->base + SIRFSOC_SPI_INT_STATUS);
- if (sspi->left_tx_word < SIRFSOC_SPI_DAT_FRM_LEN_MAX) {
- writel(readl(sspi->base + SIRFSOC_SPI_CTRL) |
- SIRFSOC_SPI_ENA_AUTO_CLR | SIRFSOC_SPI_MUL_DAT_MODE,
- sspi->base + SIRFSOC_SPI_CTRL);
- writel(sspi->left_tx_word - 1,
- sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
- writel(sspi->left_tx_word - 1,
- sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN);
+ writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->rxfifo_op);
+ writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->txfifo_op);
+ switch (sspi->type) {
+ case SIRF_REAL_SPI:
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + sspi->regs->rxfifo_op);
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + sspi->regs->txfifo_op);
+ writel(0, sspi->base + sspi->regs->int_en);
+ break;
+ case SIRF_USP_SPI_P2:
+ writel(0x0, sspi->base + sspi->regs->rxfifo_op);
+ writel(0x0, sspi->base + sspi->regs->txfifo_op);
+ writel(0, sspi->base + sspi->regs->int_en);
+ break;
+ case SIRF_USP_SPI_A7:
+ writel(0x0, sspi->base + sspi->regs->rxfifo_op);
+ writel(0x0, sspi->base + sspi->regs->txfifo_op);
+ writel(~0UL, sspi->base + sspi->regs->usp_int_en_clr);
+ break;
+ }
+ writel(readl(sspi->base + sspi->regs->int_st),
+ sspi->base + sspi->regs->int_st);
+ if (sspi->left_tx_word < sspi->dat_max_frm_len) {
+ switch (sspi->type) {
+ case SIRF_REAL_SPI:
+ writel(readl(sspi->base + sspi->regs->spi_ctrl) |
+ SIRFSOC_SPI_ENA_AUTO_CLR |
+ SIRFSOC_SPI_MUL_DAT_MODE,
+ sspi->base + sspi->regs->spi_ctrl);
+ writel(sspi->left_tx_word - 1,
+ sspi->base + sspi->regs->tx_dma_io_len);
+ writel(sspi->left_tx_word - 1,
+ sspi->base + sspi->regs->rx_dma_io_len);
+ break;
+ case SIRF_USP_SPI_P2:
+ case SIRF_USP_SPI_A7:
+ /*USP simulate SPI, tx/rx_dma_io_len indicates bytes*/
+ writel(sspi->left_tx_word * sspi->word_width,
+ sspi->base + sspi->regs->tx_dma_io_len);
+ writel(sspi->left_tx_word * sspi->word_width,
+ sspi->base + sspi->regs->rx_dma_io_len);
+ break;
+ }
} else {
- writel(readl(sspi->base + SIRFSOC_SPI_CTRL),
- sspi->base + SIRFSOC_SPI_CTRL);
- writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
- writel(0, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN);
+ if (sspi->type == SIRF_REAL_SPI)
+ writel(readl(sspi->base + sspi->regs->spi_ctrl),
+ sspi->base + sspi->regs->spi_ctrl);
+ writel(0, sspi->base + sspi->regs->tx_dma_io_len);
+ writel(0, sspi->base + sspi->regs->rx_dma_io_len);
}
sspi->dst_start = dma_map_single(&spi->dev, sspi->rx, t->len,
(t->tx_buf != t->rx_buf) ?
@@ -385,7 +568,14 @@ static void spi_sirfsoc_dma_transfer(struct spi_device *spi,
dma_async_issue_pending(sspi->tx_chan);
dma_async_issue_pending(sspi->rx_chan);
writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN,
- sspi->base + SIRFSOC_SPI_TX_RX_EN);
+ sspi->base + sspi->regs->tx_rx_en);
+ if (sspi->type == SIRF_USP_SPI_P2 ||
+ sspi->type == SIRF_USP_SPI_A7) {
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + sspi->regs->rxfifo_op);
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + sspi->regs->txfifo_op);
+ }
if (wait_for_completion_timeout(&sspi->rx_done, timeout) == 0) {
dev_err(&spi->dev, "transfer timeout\n");
dmaengine_terminate_all(sspi->rx_chan);
@@ -398,15 +588,21 @@ static void spi_sirfsoc_dma_transfer(struct spi_device *spi,
*/
if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) {
dev_err(&spi->dev, "transfer timeout\n");
+ if (sspi->type == SIRF_USP_SPI_P2 ||
+ sspi->type == SIRF_USP_SPI_A7)
+ writel(0, sspi->base + sspi->regs->tx_rx_en);
dmaengine_terminate_all(sspi->tx_chan);
}
dma_unmap_single(&spi->dev, sspi->src_start, t->len, DMA_TO_DEVICE);
dma_unmap_single(&spi->dev, sspi->dst_start, t->len, DMA_FROM_DEVICE);
/* TX, RX FIFO stop */
- writel(0, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(0, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- if (sspi->left_tx_word >= SIRFSOC_SPI_DAT_FRM_LEN_MAX)
- writel(0, sspi->base + SIRFSOC_SPI_TX_RX_EN);
+ writel(0, sspi->base + sspi->regs->rxfifo_op);
+ writel(0, sspi->base + sspi->regs->txfifo_op);
+ if (sspi->left_tx_word >= sspi->dat_max_frm_len)
+ writel(0, sspi->base + sspi->regs->tx_rx_en);
+ if (sspi->type == SIRF_USP_SPI_P2 ||
+ sspi->type == SIRF_USP_SPI_A7)
+ writel(0, sspi->base + sspi->regs->tx_rx_en);
}
static void spi_sirfsoc_pio_transfer(struct spi_device *spi,
@@ -414,57 +610,105 @@ static void spi_sirfsoc_pio_transfer(struct spi_device *spi,
{
struct sirfsoc_spi *sspi;
int timeout = t->len * 10;
+ unsigned int data_units;
sspi = spi_master_get_devdata(spi->master);
do {
writel(SIRFSOC_SPI_FIFO_RESET,
- sspi->base + SIRFSOC_SPI_RXFIFO_OP);
+ sspi->base + sspi->regs->rxfifo_op);
writel(SIRFSOC_SPI_FIFO_RESET,
- sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START,
- sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START,
- sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- writel(0, sspi->base + SIRFSOC_SPI_INT_EN);
- writel(SIRFSOC_SPI_INT_MASK_ALL,
- sspi->base + SIRFSOC_SPI_INT_STATUS);
- writel(readl(sspi->base + SIRFSOC_SPI_CTRL) |
- SIRFSOC_SPI_MUL_DAT_MODE | SIRFSOC_SPI_ENA_AUTO_CLR,
- sspi->base + SIRFSOC_SPI_CTRL);
- writel(min(sspi->left_tx_word, (u32)(256 / sspi->word_width))
- - 1, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
- writel(min(sspi->left_rx_word, (u32)(256 / sspi->word_width))
- - 1, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN);
- while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS)
- & SIRFSOC_SPI_FIFO_FULL)) && sspi->left_tx_word)
+ sspi->base + sspi->regs->txfifo_op);
+ switch (sspi->type) {
+ case SIRF_USP_SPI_P2:
+ writel(0x0, sspi->base + sspi->regs->rxfifo_op);
+ writel(0x0, sspi->base + sspi->regs->txfifo_op);
+ writel(0, sspi->base + sspi->regs->int_en);
+ writel(readl(sspi->base + sspi->regs->int_st),
+ sspi->base + sspi->regs->int_st);
+ writel(min((sspi->left_tx_word * sspi->word_width),
+ sspi->fifo_size),
+ sspi->base + sspi->regs->tx_dma_io_len);
+ writel(min((sspi->left_rx_word * sspi->word_width),
+ sspi->fifo_size),
+ sspi->base + sspi->regs->rx_dma_io_len);
+ break;
+ case SIRF_USP_SPI_A7:
+ writel(0x0, sspi->base + sspi->regs->rxfifo_op);
+ writel(0x0, sspi->base + sspi->regs->txfifo_op);
+ writel(~0UL, sspi->base + sspi->regs->usp_int_en_clr);
+ writel(readl(sspi->base + sspi->regs->int_st),
+ sspi->base + sspi->regs->int_st);
+ writel(min((sspi->left_tx_word * sspi->word_width),
+ sspi->fifo_size),
+ sspi->base + sspi->regs->tx_dma_io_len);
+ writel(min((sspi->left_rx_word * sspi->word_width),
+ sspi->fifo_size),
+ sspi->base + sspi->regs->rx_dma_io_len);
+ break;
+ case SIRF_REAL_SPI:
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + sspi->regs->rxfifo_op);
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + sspi->regs->txfifo_op);
+ writel(0, sspi->base + sspi->regs->int_en);
+ writel(readl(sspi->base + sspi->regs->int_st),
+ sspi->base + sspi->regs->int_st);
+ writel(readl(sspi->base + sspi->regs->spi_ctrl) |
+ SIRFSOC_SPI_MUL_DAT_MODE |
+ SIRFSOC_SPI_ENA_AUTO_CLR,
+ sspi->base + sspi->regs->spi_ctrl);
+ data_units = sspi->fifo_size / sspi->word_width;
+ writel(min(sspi->left_tx_word, data_units) - 1,
+ sspi->base + sspi->regs->tx_dma_io_len);
+ writel(min(sspi->left_rx_word, data_units) - 1,
+ sspi->base + sspi->regs->rx_dma_io_len);
+ break;
+ }
+ while (!((readl(sspi->base + sspi->regs->txfifo_st)
+ & SIRFSOC_SPI_FIFO_FULL_MASK(sspi))) &&
+ sspi->left_tx_word)
sspi->tx_word(sspi);
writel(SIRFSOC_SPI_TXFIFO_EMPTY_INT_EN |
SIRFSOC_SPI_TX_UFLOW_INT_EN |
SIRFSOC_SPI_RX_OFLOW_INT_EN |
SIRFSOC_SPI_RX_IO_DMA_INT_EN,
- sspi->base + SIRFSOC_SPI_INT_EN);
+ sspi->base + sspi->regs->int_en);
writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN,
- sspi->base + SIRFSOC_SPI_TX_RX_EN);
+ sspi->base + sspi->regs->tx_rx_en);
+ if (sspi->type == SIRF_USP_SPI_P2 ||
+ sspi->type == SIRF_USP_SPI_A7) {
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + sspi->regs->rxfifo_op);
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + sspi->regs->txfifo_op);
+ }
if (!wait_for_completion_timeout(&sspi->tx_done, timeout) ||
!wait_for_completion_timeout(&sspi->rx_done, timeout)) {
dev_err(&spi->dev, "transfer timeout\n");
+ if (sspi->type == SIRF_USP_SPI_P2 ||
+ sspi->type == SIRF_USP_SPI_A7)
+ writel(0, sspi->base + sspi->regs->tx_rx_en);
break;
}
- while (!((readl(sspi->base + SIRFSOC_SPI_RXFIFO_STATUS)
- & SIRFSOC_SPI_FIFO_EMPTY)) && sspi->left_rx_word)
+ while (!((readl(sspi->base + sspi->regs->rxfifo_st)
+ & SIRFSOC_SPI_FIFO_EMPTY_MASK(sspi))) &&
+ sspi->left_rx_word)
sspi->rx_word(sspi);
- writel(0, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(0, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
+ if (sspi->type == SIRF_USP_SPI_P2 ||
+ sspi->type == SIRF_USP_SPI_A7)
+ writel(0, sspi->base + sspi->regs->tx_rx_en);
+ writel(0, sspi->base + sspi->regs->rxfifo_op);
+ writel(0, sspi->base + sspi->regs->txfifo_op);
} while (sspi->left_tx_word != 0 || sspi->left_rx_word != 0);
}
static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t)
{
struct sirfsoc_spi *sspi;
- sspi = spi_master_get_devdata(spi->master);
- sspi->tx = t->tx_buf ? t->tx_buf : sspi->dummypage;
- sspi->rx = t->rx_buf ? t->rx_buf : sspi->dummypage;
+ sspi = spi_master_get_devdata(spi->master);
+ sspi->tx = t->tx_buf;
+ sspi->rx = t->rx_buf;
sspi->left_tx_word = sspi->left_rx_word = t->len / sspi->word_width;
reinit_completion(&sspi->rx_done);
reinit_completion(&sspi->tx_done);
@@ -473,7 +717,7 @@ static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t)
* null, just fill command data into command register and wait for its
* completion.
*/
- if (sspi->tx_by_cmd)
+ if (sspi->type == SIRF_REAL_SPI && sspi->tx_by_cmd)
spi_sirfsoc_cmd_transfer(spi, t);
else if (IS_DMA_VALID(t))
spi_sirfsoc_dma_transfer(spi, t);
@@ -488,22 +732,49 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value)
struct sirfsoc_spi *sspi = spi_master_get_devdata(spi->master);
if (sspi->hw_cs) {
- u32 regval = readl(sspi->base + SIRFSOC_SPI_CTRL);
- switch (value) {
- case BITBANG_CS_ACTIVE:
- if (spi->mode & SPI_CS_HIGH)
- regval |= SIRFSOC_SPI_CS_IO_OUT;
- else
- regval &= ~SIRFSOC_SPI_CS_IO_OUT;
+ u32 regval;
+
+ switch (sspi->type) {
+ case SIRF_REAL_SPI:
+ regval = readl(sspi->base + sspi->regs->spi_ctrl);
+ switch (value) {
+ case BITBANG_CS_ACTIVE:
+ if (spi->mode & SPI_CS_HIGH)
+ regval |= SIRFSOC_SPI_CS_IO_OUT;
+ else
+ regval &= ~SIRFSOC_SPI_CS_IO_OUT;
+ break;
+ case BITBANG_CS_INACTIVE:
+ if (spi->mode & SPI_CS_HIGH)
+ regval &= ~SIRFSOC_SPI_CS_IO_OUT;
+ else
+ regval |= SIRFSOC_SPI_CS_IO_OUT;
+ break;
+ }
+ writel(regval, sspi->base + sspi->regs->spi_ctrl);
break;
- case BITBANG_CS_INACTIVE:
- if (spi->mode & SPI_CS_HIGH)
- regval &= ~SIRFSOC_SPI_CS_IO_OUT;
- else
- regval |= SIRFSOC_SPI_CS_IO_OUT;
+ case SIRF_USP_SPI_P2:
+ case SIRF_USP_SPI_A7:
+ regval = readl(sspi->base +
+ sspi->regs->usp_pin_io_data);
+ switch (value) {
+ case BITBANG_CS_ACTIVE:
+ if (spi->mode & SPI_CS_HIGH)
+ regval |= SIRFSOC_USP_CS_HIGH_VALUE;
+ else
+ regval &= ~(SIRFSOC_USP_CS_HIGH_VALUE);
+ break;
+ case BITBANG_CS_INACTIVE:
+ if (spi->mode & SPI_CS_HIGH)
+ regval &= ~(SIRFSOC_USP_CS_HIGH_VALUE);
+ else
+ regval |= SIRFSOC_USP_CS_HIGH_VALUE;
+ break;
+ }
+ writel(regval,
+ sspi->base + sspi->regs->usp_pin_io_data);
break;
}
- writel(regval, sspi->base + SIRFSOC_SPI_CTRL);
} else {
switch (value) {
case BITBANG_CS_ACTIVE:
@@ -518,27 +789,102 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value)
}
}
+static int spi_sirfsoc_config_mode(struct spi_device *spi)
+{
+ struct sirfsoc_spi *sspi;
+ u32 regval, usp_mode1;
+
+ sspi = spi_master_get_devdata(spi->master);
+ regval = readl(sspi->base + sspi->regs->spi_ctrl);
+ usp_mode1 = readl(sspi->base + sspi->regs->usp_mode1);
+ if (!(spi->mode & SPI_CS_HIGH)) {
+ regval |= SIRFSOC_SPI_CS_IDLE_STAT;
+ usp_mode1 &= ~SIRFSOC_USP_CS_HIGH_VALID;
+ } else {
+ regval &= ~SIRFSOC_SPI_CS_IDLE_STAT;
+ usp_mode1 |= SIRFSOC_USP_CS_HIGH_VALID;
+ }
+ if (!(spi->mode & SPI_LSB_FIRST)) {
+ regval |= SIRFSOC_SPI_TRAN_MSB;
+ usp_mode1 &= ~SIRFSOC_USP_LSB;
+ } else {
+ regval &= ~SIRFSOC_SPI_TRAN_MSB;
+ usp_mode1 |= SIRFSOC_USP_LSB;
+ }
+ if (spi->mode & SPI_CPOL) {
+ regval |= SIRFSOC_SPI_CLK_IDLE_STAT;
+ usp_mode1 |= SIRFSOC_USP_SCLK_IDLE_STAT;
+ } else {
+ regval &= ~SIRFSOC_SPI_CLK_IDLE_STAT;
+ usp_mode1 &= ~SIRFSOC_USP_SCLK_IDLE_STAT;
+ }
+ /*
+ * Data should be driven at least 1/2 cycle before the fetch edge
+ * to make sure that data gets stable at the fetch edge.
+ */
+ if (((spi->mode & SPI_CPOL) && (spi->mode & SPI_CPHA)) ||
+ (!(spi->mode & SPI_CPOL) && !(spi->mode & SPI_CPHA))) {
+ regval &= ~SIRFSOC_SPI_DRV_POS_EDGE;
+ usp_mode1 |= (SIRFSOC_USP_TXD_FALLING_EDGE |
+ SIRFSOC_USP_RXD_FALLING_EDGE);
+ } else {
+ regval |= SIRFSOC_SPI_DRV_POS_EDGE;
+ usp_mode1 &= ~(SIRFSOC_USP_RXD_FALLING_EDGE |
+ SIRFSOC_USP_TXD_FALLING_EDGE);
+ }
+ writel((SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, sspi->fifo_size - 2) <<
+ SIRFSOC_SPI_FIFO_SC_OFFSET) |
+ (SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, sspi->fifo_size / 2) <<
+ SIRFSOC_SPI_FIFO_LC_OFFSET) |
+ (SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, 2) <<
+ SIRFSOC_SPI_FIFO_HC_OFFSET),
+ sspi->base + sspi->regs->txfifo_level_chk);
+ writel((SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, 2) <<
+ SIRFSOC_SPI_FIFO_SC_OFFSET) |
+ (SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, sspi->fifo_size / 2) <<
+ SIRFSOC_SPI_FIFO_LC_OFFSET) |
+ (SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, sspi->fifo_size - 2) <<
+ SIRFSOC_SPI_FIFO_HC_OFFSET),
+ sspi->base + sspi->regs->rxfifo_level_chk);
+ /*
+ * it should never set to hardware cs mode because in hardware cs mode,
+ * cs signal can't controlled by driver.
+ */
+ switch (sspi->type) {
+ case SIRF_REAL_SPI:
+ regval |= SIRFSOC_SPI_CS_IO_MODE;
+ writel(regval, sspi->base + sspi->regs->spi_ctrl);
+ break;
+ case SIRF_USP_SPI_P2:
+ case SIRF_USP_SPI_A7:
+ usp_mode1 |= SIRFSOC_USP_SYNC_MODE;
+ usp_mode1 |= SIRFSOC_USP_TFS_IO_MODE;
+ usp_mode1 &= ~SIRFSOC_USP_TFS_IO_INPUT;
+ writel(usp_mode1, sspi->base + sspi->regs->usp_mode1);
+ break;
+ }
+
+ return 0;
+}
+
static int
spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
{
struct sirfsoc_spi *sspi;
u8 bits_per_word = 0;
int hz = 0;
- u32 regval;
- u32 txfifo_ctrl, rxfifo_ctrl;
- u32 fifo_size = SIRFSOC_SPI_FIFO_SIZE / 4;
+ u32 regval, txfifo_ctrl, rxfifo_ctrl, tx_frm_ctl, rx_frm_ctl, usp_mode2;
sspi = spi_master_get_devdata(spi->master);
bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
hz = t && t->speed_hz ? t->speed_hz : spi->max_speed_hz;
- regval = (sspi->ctrl_freq / (2 * hz)) - 1;
+ usp_mode2 = regval = (sspi->ctrl_freq / (2 * hz)) - 1;
if (regval > 0xFFFF || regval < 0) {
dev_err(&spi->dev, "Speed %d not supported\n", hz);
return -EINVAL;
}
-
switch (bits_per_word) {
case 8:
regval |= SIRFSOC_SPI_TRAN_DAT_FORMAT_8;
@@ -559,94 +905,177 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
sspi->tx_word = spi_sirfsoc_tx_word_u32;
break;
default:
- BUG();
+ dev_err(&spi->dev, "bpw %d not supported\n", bits_per_word);
+ return -EINVAL;
}
-
sspi->word_width = DIV_ROUND_UP(bits_per_word, 8);
- txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- (sspi->word_width >> 1);
- rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- (sspi->word_width >> 1);
-
- if (!(spi->mode & SPI_CS_HIGH))
- regval |= SIRFSOC_SPI_CS_IDLE_STAT;
- if (!(spi->mode & SPI_LSB_FIRST))
- regval |= SIRFSOC_SPI_TRAN_MSB;
- if (spi->mode & SPI_CPOL)
- regval |= SIRFSOC_SPI_CLK_IDLE_STAT;
-
- /*
- * Data should be driven at least 1/2 cycle before the fetch edge
- * to make sure that data gets stable at the fetch edge.
- */
- if (((spi->mode & SPI_CPOL) && (spi->mode & SPI_CPHA)) ||
- (!(spi->mode & SPI_CPOL) && !(spi->mode & SPI_CPHA)))
- regval &= ~SIRFSOC_SPI_DRV_POS_EDGE;
- else
- regval |= SIRFSOC_SPI_DRV_POS_EDGE;
-
- writel(SIRFSOC_SPI_FIFO_SC(fifo_size - 2) |
- SIRFSOC_SPI_FIFO_LC(fifo_size / 2) |
- SIRFSOC_SPI_FIFO_HC(2),
- sspi->base + SIRFSOC_SPI_TXFIFO_LEVEL_CHK);
- writel(SIRFSOC_SPI_FIFO_SC(2) |
- SIRFSOC_SPI_FIFO_LC(fifo_size / 2) |
- SIRFSOC_SPI_FIFO_HC(fifo_size - 2),
- sspi->base + SIRFSOC_SPI_RXFIFO_LEVEL_CHK);
- writel(txfifo_ctrl, sspi->base + SIRFSOC_SPI_TXFIFO_CTRL);
- writel(rxfifo_ctrl, sspi->base + SIRFSOC_SPI_RXFIFO_CTRL);
-
- if (t && t->tx_buf && !t->rx_buf && (t->len <= SIRFSOC_MAX_CMD_BYTES)) {
- regval |= (SIRFSOC_SPI_CMD_BYTE_NUM((t->len - 1)) |
- SIRFSOC_SPI_CMD_MODE);
- sspi->tx_by_cmd = true;
- } else {
- regval &= ~SIRFSOC_SPI_CMD_MODE;
- sspi->tx_by_cmd = false;
+ txfifo_ctrl = (((sspi->fifo_size / 2) &
+ SIRFSOC_SPI_FIFO_THD_MASK(sspi))
+ << SIRFSOC_SPI_FIFO_THD_OFFSET) |
+ (sspi->word_width >> 1);
+ rxfifo_ctrl = (((sspi->fifo_size / 2) &
+ SIRFSOC_SPI_FIFO_THD_MASK(sspi))
+ << SIRFSOC_SPI_FIFO_THD_OFFSET) |
+ (sspi->word_width >> 1);
+ writel(txfifo_ctrl, sspi->base + sspi->regs->txfifo_ctrl);
+ writel(rxfifo_ctrl, sspi->base + sspi->regs->rxfifo_ctrl);
+ if (sspi->type == SIRF_USP_SPI_P2 ||
+ sspi->type == SIRF_USP_SPI_A7) {
+ tx_frm_ctl = 0;
+ tx_frm_ctl |= ((bits_per_word - 1) & SIRFSOC_USP_TX_DATA_MASK)
+ << SIRFSOC_USP_TX_DATA_OFFSET;
+ tx_frm_ctl |= ((bits_per_word + 1 + SIRFSOC_USP_TXD_DELAY_LEN
+ - 1) & SIRFSOC_USP_TX_SYNC_MASK) <<
+ SIRFSOC_USP_TX_SYNC_OFFSET;
+ tx_frm_ctl |= ((bits_per_word + 1 + SIRFSOC_USP_TXD_DELAY_LEN
+ + 2 - 1) & SIRFSOC_USP_TX_FRAME_MASK) <<
+ SIRFSOC_USP_TX_FRAME_OFFSET;
+ tx_frm_ctl |= ((bits_per_word - 1) &
+ SIRFSOC_USP_TX_SHIFTER_MASK) <<
+ SIRFSOC_USP_TX_SHIFTER_OFFSET;
+ rx_frm_ctl = 0;
+ rx_frm_ctl |= ((bits_per_word - 1) & SIRFSOC_USP_RX_DATA_MASK)
+ << SIRFSOC_USP_RX_DATA_OFFSET;
+ rx_frm_ctl |= ((bits_per_word + 1 + SIRFSOC_USP_RXD_DELAY_LEN
+ + 2 - 1) & SIRFSOC_USP_RX_FRAME_MASK) <<
+ SIRFSOC_USP_RX_FRAME_OFFSET;
+ rx_frm_ctl |= ((bits_per_word - 1)
+ & SIRFSOC_USP_RX_SHIFTER_MASK) <<
+ SIRFSOC_USP_RX_SHIFTER_OFFSET;
+ writel(tx_frm_ctl | (((usp_mode2 >> 10) &
+ SIRFSOC_USP_CLK_10_11_MASK) <<
+ SIRFSOC_USP_CLK_10_11_OFFSET),
+ sspi->base + sspi->regs->usp_tx_frame_ctrl);
+ writel(rx_frm_ctl | (((usp_mode2 >> 12) &
+ SIRFSOC_USP_CLK_12_15_MASK) <<
+ SIRFSOC_USP_CLK_12_15_OFFSET),
+ sspi->base + sspi->regs->usp_rx_frame_ctrl);
+ writel(readl(sspi->base + sspi->regs->usp_mode2) |
+ ((usp_mode2 & SIRFSOC_USP_CLK_DIVISOR_MASK) <<
+ SIRFSOC_USP_CLK_DIVISOR_OFFSET) |
+ (SIRFSOC_USP_RXD_DELAY_LEN <<
+ SIRFSOC_USP_RXD_DELAY_OFFSET) |
+ (SIRFSOC_USP_TXD_DELAY_LEN <<
+ SIRFSOC_USP_TXD_DELAY_OFFSET),
+ sspi->base + sspi->regs->usp_mode2);
+ }
+ if (sspi->type == SIRF_REAL_SPI)
+ writel(regval, sspi->base + sspi->regs->spi_ctrl);
+ spi_sirfsoc_config_mode(spi);
+ if (sspi->type == SIRF_REAL_SPI) {
+ if (t && t->tx_buf && !t->rx_buf &&
+ (t->len <= SIRFSOC_MAX_CMD_BYTES)) {
+ sspi->tx_by_cmd = true;
+ writel(readl(sspi->base + sspi->regs->spi_ctrl) |
+ (SIRFSOC_SPI_CMD_BYTE_NUM((t->len - 1)) |
+ SIRFSOC_SPI_CMD_MODE),
+ sspi->base + sspi->regs->spi_ctrl);
+ } else {
+ sspi->tx_by_cmd = false;
+ writel(readl(sspi->base + sspi->regs->spi_ctrl) &
+ ~SIRFSOC_SPI_CMD_MODE,
+ sspi->base + sspi->regs->spi_ctrl);
+ }
}
- /*
- * it should never set to hardware cs mode because in hardware cs mode,
- * cs signal can't controlled by driver.
- */
- regval |= SIRFSOC_SPI_CS_IO_MODE;
- writel(regval, sspi->base + SIRFSOC_SPI_CTRL);
-
if (IS_DMA_VALID(t)) {
/* Enable DMA mode for RX, TX */
- writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL);
+ writel(0, sspi->base + sspi->regs->tx_dma_io_ctrl);
writel(SIRFSOC_SPI_RX_DMA_FLUSH,
- sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL);
+ sspi->base + sspi->regs->rx_dma_io_ctrl);
} else {
/* Enable IO mode for RX, TX */
writel(SIRFSOC_SPI_IO_MODE_SEL,
- sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL);
+ sspi->base + sspi->regs->tx_dma_io_ctrl);
writel(SIRFSOC_SPI_IO_MODE_SEL,
- sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL);
+ sspi->base + sspi->regs->rx_dma_io_ctrl);
}
-
return 0;
}
static int spi_sirfsoc_setup(struct spi_device *spi)
{
struct sirfsoc_spi *sspi;
+ int ret = 0;
sspi = spi_master_get_devdata(spi->master);
-
if (spi->cs_gpio == -ENOENT)
sspi->hw_cs = true;
- else
+ else {
sspi->hw_cs = false;
- return spi_sirfsoc_setup_transfer(spi, NULL);
+ if (!spi_get_ctldata(spi)) {
+ void *cs = kmalloc(sizeof(int), GFP_KERNEL);
+ if (!cs) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+ ret = gpio_is_valid(spi->cs_gpio);
+ if (!ret) {
+ dev_err(&spi->dev, "no valid gpio\n");
+ ret = -ENOENT;
+ goto exit;
+ }
+ ret = gpio_request(spi->cs_gpio, DRIVER_NAME);
+ if (ret) {
+ dev_err(&spi->dev, "failed to request gpio\n");
+ goto exit;
+ }
+ spi_set_ctldata(spi, cs);
+ }
+ }
+ spi_sirfsoc_config_mode(spi);
+ spi_sirfsoc_chipselect(spi, BITBANG_CS_INACTIVE);
+exit:
+ return ret;
+}
+
+static void spi_sirfsoc_cleanup(struct spi_device *spi)
+{
+ if (spi_get_ctldata(spi)) {
+ gpio_free(spi->cs_gpio);
+ kfree(spi_get_ctldata(spi));
+ }
}
+static const struct sirf_spi_comp_data sirf_real_spi = {
+ .regs = &real_spi_register,
+ .type = SIRF_REAL_SPI,
+ .dat_max_frm_len = 64 * 1024,
+ .fifo_size = 256,
+};
+
+static const struct sirf_spi_comp_data sirf_usp_spi_p2 = {
+ .regs = &usp_spi_register,
+ .type = SIRF_USP_SPI_P2,
+ .dat_max_frm_len = 1024 * 1024,
+ .fifo_size = 128,
+ .hwinit = sirfsoc_usp_hwinit,
+};
+
+static const struct sirf_spi_comp_data sirf_usp_spi_a7 = {
+ .regs = &usp_spi_register,
+ .type = SIRF_USP_SPI_A7,
+ .dat_max_frm_len = 1024 * 1024,
+ .fifo_size = 512,
+ .hwinit = sirfsoc_usp_hwinit,
+};
+
+static const struct of_device_id spi_sirfsoc_of_match[] = {
+ { .compatible = "sirf,prima2-spi", .data = &sirf_real_spi},
+ { .compatible = "sirf,prima2-usp-spi", .data = &sirf_usp_spi_p2},
+ { .compatible = "sirf,atlas7-usp-spi", .data = &sirf_usp_spi_a7},
+ {}
+};
+MODULE_DEVICE_TABLE(of, spi_sirfsoc_of_match);
+
static int spi_sirfsoc_probe(struct platform_device *pdev)
{
struct sirfsoc_spi *sspi;
struct spi_master *master;
struct resource *mem_res;
+ struct sirf_spi_comp_data *spi_comp_data;
int irq;
- int i, ret;
+ int ret;
+ const struct of_device_id *match;
ret = device_reset(&pdev->dev);
if (ret) {
@@ -659,16 +1088,22 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Unable to allocate SPI master\n");
return -ENOMEM;
}
+ match = of_match_node(spi_sirfsoc_of_match, pdev->dev.of_node);
platform_set_drvdata(pdev, master);
sspi = spi_master_get_devdata(master);
-
+ sspi->fifo_full_offset = ilog2(sspi->fifo_size);
+ spi_comp_data = (struct sirf_spi_comp_data *)match->data;
+ sspi->regs = spi_comp_data->regs;
+ sspi->type = spi_comp_data->type;
+ sspi->fifo_level_chk_mask = (sspi->fifo_size / 4) - 1;
+ sspi->dat_max_frm_len = spi_comp_data->dat_max_frm_len;
+ sspi->fifo_size = spi_comp_data->fifo_size;
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sspi->base = devm_ioremap_resource(&pdev->dev, mem_res);
if (IS_ERR(sspi->base)) {
ret = PTR_ERR(sspi->base);
goto free_master;
}
-
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = -ENXIO;
@@ -684,11 +1119,13 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
sspi->bitbang.setup_transfer = spi_sirfsoc_setup_transfer;
sspi->bitbang.txrx_bufs = spi_sirfsoc_transfer;
sspi->bitbang.master->setup = spi_sirfsoc_setup;
+ sspi->bitbang.master->cleanup = spi_sirfsoc_cleanup;
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(12) |
SPI_BPW_MASK(16) | SPI_BPW_MASK(32);
master->max_speed_hz = SIRFSOC_SPI_DEFAULT_FRQ;
+ master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
sspi->bitbang.master->dev.of_node = pdev->dev.of_node;
/* request DMA channels */
@@ -711,47 +1148,19 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
goto free_tx_dma;
}
clk_prepare_enable(sspi->clk);
+ if (spi_comp_data->hwinit)
+ spi_comp_data->hwinit(sspi);
sspi->ctrl_freq = clk_get_rate(sspi->clk);
init_completion(&sspi->rx_done);
init_completion(&sspi->tx_done);
- writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- /* We are not using dummy delay between command and data */
- writel(0, sspi->base + SIRFSOC_SPI_DUMMY_DELAY_CTL);
-
- sspi->dummypage = kmalloc(2 * PAGE_SIZE, GFP_KERNEL);
- if (!sspi->dummypage) {
- ret = -ENOMEM;
- goto free_clk;
- }
-
ret = spi_bitbang_start(&sspi->bitbang);
if (ret)
- goto free_dummypage;
- for (i = 0; master->cs_gpios && i < master->num_chipselect; i++) {
- if (master->cs_gpios[i] == -ENOENT)
- continue;
- if (!gpio_is_valid(master->cs_gpios[i])) {
- dev_err(&pdev->dev, "no valid gpio\n");
- ret = -EINVAL;
- goto free_dummypage;
- }
- ret = devm_gpio_request(&pdev->dev,
- master->cs_gpios[i], DRIVER_NAME);
- if (ret) {
- dev_err(&pdev->dev, "failed to request gpio\n");
- goto free_dummypage;
- }
- }
+ goto free_clk;
dev_info(&pdev->dev, "registerred, bus number = %d\n", master->bus_num);
return 0;
-free_dummypage:
- kfree(sspi->dummypage);
free_clk:
clk_disable_unprepare(sspi->clk);
clk_put(sspi->clk);
@@ -772,9 +1181,7 @@ static int spi_sirfsoc_remove(struct platform_device *pdev)
master = platform_get_drvdata(pdev);
sspi = spi_master_get_devdata(master);
-
spi_bitbang_stop(&sspi->bitbang);
- kfree(sspi->dummypage);
clk_disable_unprepare(sspi->clk);
clk_put(sspi->clk);
dma_release_channel(sspi->rx_chan);
@@ -804,24 +1211,17 @@ static int spi_sirfsoc_resume(struct device *dev)
struct sirfsoc_spi *sspi = spi_master_get_devdata(master);
clk_enable(sspi->clk);
- writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-
- return spi_master_resume(master);
+ writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->txfifo_op);
+ writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->rxfifo_op);
+ writel(SIRFSOC_SPI_FIFO_START, sspi->base + sspi->regs->txfifo_op);
+ writel(SIRFSOC_SPI_FIFO_START, sspi->base + sspi->regs->rxfifo_op);
+ return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(spi_sirfsoc_pm_ops, spi_sirfsoc_suspend,
spi_sirfsoc_resume);
-static const struct of_device_id spi_sirfsoc_of_match[] = {
- { .compatible = "sirf,prima2-spi", },
- {}
-};
-MODULE_DEVICE_TABLE(of, spi_sirfsoc_of_match);
-
static struct platform_driver spi_sirfsoc_driver = {
.driver = {
.name = DRIVER_NAME,
@@ -835,4 +1235,5 @@ module_platform_driver(spi_sirfsoc_driver);
MODULE_DESCRIPTION("SiRF SoC SPI master driver");
MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>");
MODULE_AUTHOR("Barry Song <Baohua.Song@csr.com>");
+MODULE_AUTHOR("Qipan Li <Qipan.Li@csr.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
new file mode 100644
index 000000000..f23f36eba
--- /dev/null
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -0,0 +1,1123 @@
+/*
+ * Xilinx Zynq UltraScale+ MPSoC Quad-SPI (QSPI) controller driver
+ * (master mode only)
+ *
+ * Copyright (C) 2009 - 2015 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+/* Generic QSPI register offsets */
+#define GQSPI_CONFIG_OFST 0x00000100
+#define GQSPI_ISR_OFST 0x00000104
+#define GQSPI_IDR_OFST 0x0000010C
+#define GQSPI_IER_OFST 0x00000108
+#define GQSPI_IMASK_OFST 0x00000110
+#define GQSPI_EN_OFST 0x00000114
+#define GQSPI_TXD_OFST 0x0000011C
+#define GQSPI_RXD_OFST 0x00000120
+#define GQSPI_TX_THRESHOLD_OFST 0x00000128
+#define GQSPI_RX_THRESHOLD_OFST 0x0000012C
+#define GQSPI_LPBK_DLY_ADJ_OFST 0x00000138
+#define GQSPI_GEN_FIFO_OFST 0x00000140
+#define GQSPI_SEL_OFST 0x00000144
+#define GQSPI_GF_THRESHOLD_OFST 0x00000150
+#define GQSPI_FIFO_CTRL_OFST 0x0000014C
+#define GQSPI_QSPIDMA_DST_CTRL_OFST 0x0000080C
+#define GQSPI_QSPIDMA_DST_SIZE_OFST 0x00000804
+#define GQSPI_QSPIDMA_DST_STS_OFST 0x00000808
+#define GQSPI_QSPIDMA_DST_I_STS_OFST 0x00000814
+#define GQSPI_QSPIDMA_DST_I_EN_OFST 0x00000818
+#define GQSPI_QSPIDMA_DST_I_DIS_OFST 0x0000081C
+#define GQSPI_QSPIDMA_DST_I_MASK_OFST 0x00000820
+#define GQSPI_QSPIDMA_DST_ADDR_OFST 0x00000800
+#define GQSPI_QSPIDMA_DST_ADDR_MSB_OFST 0x00000828
+
+/* GQSPI register bit masks */
+#define GQSPI_SEL_MASK 0x00000001
+#define GQSPI_EN_MASK 0x00000001
+#define GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK 0x00000020
+#define GQSPI_ISR_WR_TO_CLR_MASK 0x00000002
+#define GQSPI_IDR_ALL_MASK 0x00000FBE
+#define GQSPI_CFG_MODE_EN_MASK 0xC0000000
+#define GQSPI_CFG_GEN_FIFO_START_MODE_MASK 0x20000000
+#define GQSPI_CFG_ENDIAN_MASK 0x04000000
+#define GQSPI_CFG_EN_POLL_TO_MASK 0x00100000
+#define GQSPI_CFG_WP_HOLD_MASK 0x00080000
+#define GQSPI_CFG_BAUD_RATE_DIV_MASK 0x00000038
+#define GQSPI_CFG_CLK_PHA_MASK 0x00000004
+#define GQSPI_CFG_CLK_POL_MASK 0x00000002
+#define GQSPI_CFG_START_GEN_FIFO_MASK 0x10000000
+#define GQSPI_GENFIFO_IMM_DATA_MASK 0x000000FF
+#define GQSPI_GENFIFO_DATA_XFER 0x00000100
+#define GQSPI_GENFIFO_EXP 0x00000200
+#define GQSPI_GENFIFO_MODE_SPI 0x00000400
+#define GQSPI_GENFIFO_MODE_DUALSPI 0x00000800
+#define GQSPI_GENFIFO_MODE_QUADSPI 0x00000C00
+#define GQSPI_GENFIFO_MODE_MASK 0x00000C00
+#define GQSPI_GENFIFO_CS_LOWER 0x00001000
+#define GQSPI_GENFIFO_CS_UPPER 0x00002000
+#define GQSPI_GENFIFO_BUS_LOWER 0x00004000
+#define GQSPI_GENFIFO_BUS_UPPER 0x00008000
+#define GQSPI_GENFIFO_BUS_BOTH 0x0000C000
+#define GQSPI_GENFIFO_BUS_MASK 0x0000C000
+#define GQSPI_GENFIFO_TX 0x00010000
+#define GQSPI_GENFIFO_RX 0x00020000
+#define GQSPI_GENFIFO_STRIPE 0x00040000
+#define GQSPI_GENFIFO_POLL 0x00080000
+#define GQSPI_GENFIFO_EXP_START 0x00000100
+#define GQSPI_FIFO_CTRL_RST_RX_FIFO_MASK 0x00000004
+#define GQSPI_FIFO_CTRL_RST_TX_FIFO_MASK 0x00000002
+#define GQSPI_FIFO_CTRL_RST_GEN_FIFO_MASK 0x00000001
+#define GQSPI_ISR_RXEMPTY_MASK 0x00000800
+#define GQSPI_ISR_GENFIFOFULL_MASK 0x00000400
+#define GQSPI_ISR_GENFIFONOT_FULL_MASK 0x00000200
+#define GQSPI_ISR_TXEMPTY_MASK 0x00000100
+#define GQSPI_ISR_GENFIFOEMPTY_MASK 0x00000080
+#define GQSPI_ISR_RXFULL_MASK 0x00000020
+#define GQSPI_ISR_RXNEMPTY_MASK 0x00000010
+#define GQSPI_ISR_TXFULL_MASK 0x00000008
+#define GQSPI_ISR_TXNOT_FULL_MASK 0x00000004
+#define GQSPI_ISR_POLL_TIME_EXPIRE_MASK 0x00000002
+#define GQSPI_IER_TXNOT_FULL_MASK 0x00000004
+#define GQSPI_IER_RXEMPTY_MASK 0x00000800
+#define GQSPI_IER_POLL_TIME_EXPIRE_MASK 0x00000002
+#define GQSPI_IER_RXNEMPTY_MASK 0x00000010
+#define GQSPI_IER_GENFIFOEMPTY_MASK 0x00000080
+#define GQSPI_IER_TXEMPTY_MASK 0x00000100
+#define GQSPI_QSPIDMA_DST_INTR_ALL_MASK 0x000000FE
+#define GQSPI_QSPIDMA_DST_STS_WTC 0x0000E000
+#define GQSPI_CFG_MODE_EN_DMA_MASK 0x80000000
+#define GQSPI_ISR_IDR_MASK 0x00000994
+#define GQSPI_QSPIDMA_DST_I_EN_DONE_MASK 0x00000002
+#define GQSPI_QSPIDMA_DST_I_STS_DONE_MASK 0x00000002
+#define GQSPI_IRQ_MASK 0x00000980
+
+#define GQSPI_CFG_BAUD_RATE_DIV_SHIFT 3
+#define GQSPI_GENFIFO_CS_SETUP 0x4
+#define GQSPI_GENFIFO_CS_HOLD 0x3
+#define GQSPI_TXD_DEPTH 64
+#define GQSPI_RX_FIFO_THRESHOLD 32
+#define GQSPI_RX_FIFO_FILL (GQSPI_RX_FIFO_THRESHOLD * 4)
+#define GQSPI_TX_FIFO_THRESHOLD_RESET_VAL 32
+#define GQSPI_TX_FIFO_FILL (GQSPI_TXD_DEPTH -\
+ GQSPI_TX_FIFO_THRESHOLD_RESET_VAL)
+#define GQSPI_GEN_FIFO_THRESHOLD_RESET_VAL 0X10
+#define GQSPI_QSPIDMA_DST_CTRL_RESET_VAL 0x803FFA00
+#define GQSPI_SELECT_FLASH_CS_LOWER 0x1
+#define GQSPI_SELECT_FLASH_CS_UPPER 0x2
+#define GQSPI_SELECT_FLASH_CS_BOTH 0x3
+#define GQSPI_SELECT_FLASH_BUS_LOWER 0x1
+#define GQSPI_SELECT_FLASH_BUS_UPPER 0x2
+#define GQSPI_SELECT_FLASH_BUS_BOTH 0x3
+#define GQSPI_BAUD_DIV_MAX 7 /* Baud rate divisor maximum */
+#define GQSPI_BAUD_DIV_SHIFT 2 /* Baud rate divisor shift */
+#define GQSPI_SELECT_MODE_SPI 0x1
+#define GQSPI_SELECT_MODE_DUALSPI 0x2
+#define GQSPI_SELECT_MODE_QUADSPI 0x4
+#define GQSPI_DMA_UNALIGN 0x3
+#define GQSPI_DEFAULT_NUM_CS 1 /* Default number of chip selects */
+
+enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
+
+/**
+ * struct zynqmp_qspi - Defines qspi driver instance
+ * @regs: Virtual address of the QSPI controller registers
+ * @refclk: Pointer to the peripheral clock
+ * @pclk: Pointer to the APB clock
+ * @irq: IRQ number
+ * @dev: Pointer to struct device
+ * @txbuf: Pointer to the TX buffer
+ * @rxbuf: Pointer to the RX buffer
+ * @bytes_to_transfer: Number of bytes left to transfer
+ * @bytes_to_receive: Number of bytes left to receive
+ * @genfifocs: Used for chip select
+ * @genfifobus: Used to select the upper or lower bus
+ * @dma_rx_bytes: Remaining bytes to receive by DMA mode
+ * @dma_addr: DMA address after mapping the kernel buffer
+ * @genfifoentry: Used for storing the genfifoentry instruction.
+ * @mode: Defines the mode in which QSPI is operating
+ */
+struct zynqmp_qspi {
+ void __iomem *regs;
+ struct clk *refclk;
+ struct clk *pclk;
+ int irq;
+ struct device *dev;
+ const void *txbuf;
+ void *rxbuf;
+ int bytes_to_transfer;
+ int bytes_to_receive;
+ u32 genfifocs;
+ u32 genfifobus;
+ u32 dma_rx_bytes;
+ dma_addr_t dma_addr;
+ u32 genfifoentry;
+ enum mode_type mode;
+};
+
+/**
+ * zynqmp_gqspi_read: For GQSPI controller read operation
+ * @xqspi: Pointer to the zynqmp_qspi structure
+ * @offset: Offset from where to read
+ */
+static u32 zynqmp_gqspi_read(struct zynqmp_qspi *xqspi, u32 offset)
+{
+ return readl_relaxed(xqspi->regs + offset);
+}
+
+/**
+ * zynqmp_gqspi_write: For GQSPI controller write operation
+ * @xqspi: Pointer to the zynqmp_qspi structure
+ * @offset: Offset where to write
+ * @val: Value to be written
+ */
+static inline void zynqmp_gqspi_write(struct zynqmp_qspi *xqspi, u32 offset,
+ u32 val)
+{
+ writel_relaxed(val, (xqspi->regs + offset));
+}
+
+/**
+ * zynqmp_gqspi_selectslave: For selection of slave device
+ * @instanceptr: Pointer to the zynqmp_qspi structure
+ * @flashcs: For chip select
+ * @flashbus: To check which bus is selected- upper or lower
+ */
+static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr,
+ u8 slavecs, u8 slavebus)
+{
+ /*
+ * Bus and CS lines selected here will be updated in the instance and
+ * used for subsequent GENFIFO entries during transfer.
+ */
+
+ /* Choose slave select line */
+ switch (slavecs) {
+ case GQSPI_SELECT_FLASH_CS_BOTH:
+ instanceptr->genfifocs = GQSPI_GENFIFO_CS_LOWER |
+ GQSPI_GENFIFO_CS_UPPER;
+ break;
+ case GQSPI_SELECT_FLASH_CS_UPPER:
+ instanceptr->genfifocs = GQSPI_GENFIFO_CS_UPPER;
+ break;
+ case GQSPI_SELECT_FLASH_CS_LOWER:
+ instanceptr->genfifocs = GQSPI_GENFIFO_CS_LOWER;
+ break;
+ default:
+ dev_warn(instanceptr->dev, "Invalid slave select\n");
+ }
+
+ /* Choose the bus */
+ switch (slavebus) {
+ case GQSPI_SELECT_FLASH_BUS_BOTH:
+ instanceptr->genfifobus = GQSPI_GENFIFO_BUS_LOWER |
+ GQSPI_GENFIFO_BUS_UPPER;
+ break;
+ case GQSPI_SELECT_FLASH_BUS_UPPER:
+ instanceptr->genfifobus = GQSPI_GENFIFO_BUS_UPPER;
+ break;
+ case GQSPI_SELECT_FLASH_BUS_LOWER:
+ instanceptr->genfifobus = GQSPI_GENFIFO_BUS_LOWER;
+ break;
+ default:
+ dev_warn(instanceptr->dev, "Invalid slave bus\n");
+ }
+}
+
+/**
+ * zynqmp_qspi_init_hw: Initialize the hardware
+ * @xqspi: Pointer to the zynqmp_qspi structure
+ *
+ * The default settings of the QSPI controller's configurable parameters on
+ * reset are
+ * - Master mode
+ * - TX threshold set to 1
+ * - RX threshold set to 1
+ * - Flash memory interface mode enabled
+ * This function performs the following actions
+ * - Disable and clear all the interrupts
+ * - Enable manual slave select
+ * - Enable manual start
+ * - Deselect all the chip select lines
+ * - Set the little endian mode of TX FIFO and
+ * - Enable the QSPI controller
+ */
+static void zynqmp_qspi_init_hw(struct zynqmp_qspi *xqspi)
+{
+ u32 config_reg;
+
+ /* Select the GQSPI mode */
+ zynqmp_gqspi_write(xqspi, GQSPI_SEL_OFST, GQSPI_SEL_MASK);
+ /* Clear and disable interrupts */
+ zynqmp_gqspi_write(xqspi, GQSPI_ISR_OFST,
+ zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST) |
+ GQSPI_ISR_WR_TO_CLR_MASK);
+ /* Clear the DMA STS */
+ zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_I_STS_OFST,
+ zynqmp_gqspi_read(xqspi,
+ GQSPI_QSPIDMA_DST_I_STS_OFST));
+ zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_STS_OFST,
+ zynqmp_gqspi_read(xqspi,
+ GQSPI_QSPIDMA_DST_STS_OFST) |
+ GQSPI_QSPIDMA_DST_STS_WTC);
+ zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_IDR_ALL_MASK);
+ zynqmp_gqspi_write(xqspi,
+ GQSPI_QSPIDMA_DST_I_DIS_OFST,
+ GQSPI_QSPIDMA_DST_INTR_ALL_MASK);
+ /* Disable the GQSPI */
+ zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
+ config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+ config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+ /* Manual start */
+ config_reg |= GQSPI_CFG_GEN_FIFO_START_MODE_MASK;
+ /* Little endian by default */
+ config_reg &= ~GQSPI_CFG_ENDIAN_MASK;
+ /* Disable poll time out */
+ config_reg &= ~GQSPI_CFG_EN_POLL_TO_MASK;
+ /* Set hold bit */
+ config_reg |= GQSPI_CFG_WP_HOLD_MASK;
+ /* Clear pre-scalar by default */
+ config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK;
+ /* CPHA 0 */
+ config_reg &= ~GQSPI_CFG_CLK_PHA_MASK;
+ /* CPOL 0 */
+ config_reg &= ~GQSPI_CFG_CLK_POL_MASK;
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+
+ /* Clear the TX and RX FIFO */
+ zynqmp_gqspi_write(xqspi, GQSPI_FIFO_CTRL_OFST,
+ GQSPI_FIFO_CTRL_RST_RX_FIFO_MASK |
+ GQSPI_FIFO_CTRL_RST_TX_FIFO_MASK |
+ GQSPI_FIFO_CTRL_RST_GEN_FIFO_MASK);
+ /* Set by default to allow for high frequencies */
+ zynqmp_gqspi_write(xqspi, GQSPI_LPBK_DLY_ADJ_OFST,
+ zynqmp_gqspi_read(xqspi, GQSPI_LPBK_DLY_ADJ_OFST) |
+ GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK);
+ /* Reset thresholds */
+ zynqmp_gqspi_write(xqspi, GQSPI_TX_THRESHOLD_OFST,
+ GQSPI_TX_FIFO_THRESHOLD_RESET_VAL);
+ zynqmp_gqspi_write(xqspi, GQSPI_RX_THRESHOLD_OFST,
+ GQSPI_RX_FIFO_THRESHOLD);
+ zynqmp_gqspi_write(xqspi, GQSPI_GF_THRESHOLD_OFST,
+ GQSPI_GEN_FIFO_THRESHOLD_RESET_VAL);
+ zynqmp_gqspi_selectslave(xqspi,
+ GQSPI_SELECT_FLASH_CS_LOWER,
+ GQSPI_SELECT_FLASH_BUS_LOWER);
+ /* Initialize DMA */
+ zynqmp_gqspi_write(xqspi,
+ GQSPI_QSPIDMA_DST_CTRL_OFST,
+ GQSPI_QSPIDMA_DST_CTRL_RESET_VAL);
+
+ /* Enable the GQSPI */
+ zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
+}
+
+/**
+ * zynqmp_qspi_copy_read_data: Copy data to RX buffer
+ * @xqspi: Pointer to the zynqmp_qspi structure
+ * @data: The variable where data is stored
+ * @size: Number of bytes to be copied from data to RX buffer
+ */
+static void zynqmp_qspi_copy_read_data(struct zynqmp_qspi *xqspi,
+ ulong data, u8 size)
+{
+ memcpy(xqspi->rxbuf, &data, size);
+ xqspi->rxbuf += size;
+ xqspi->bytes_to_receive -= size;
+}
+
+/**
+ * zynqmp_prepare_transfer_hardware: Prepares hardware for transfer.
+ * @master: Pointer to the spi_master structure which provides
+ * information about the controller.
+ *
+ * This function enables SPI master controller.
+ *
+ * Return: 0 on success; error value otherwise
+ */
+static int zynqmp_prepare_transfer_hardware(struct spi_master *master)
+{
+ struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+ int ret;
+
+ ret = clk_enable(xqspi->refclk);
+ if (ret)
+ goto clk_err;
+
+ ret = clk_enable(xqspi->pclk);
+ if (ret)
+ goto clk_err;
+
+ zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
+ return 0;
+clk_err:
+ return ret;
+}
+
+/**
+ * zynqmp_unprepare_transfer_hardware: Relaxes hardware after transfer
+ * @master: Pointer to the spi_master structure which provides
+ * information about the controller.
+ *
+ * This function disables the SPI master controller.
+ *
+ * Return: Always 0
+ */
+static int zynqmp_unprepare_transfer_hardware(struct spi_master *master)
+{
+ struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+
+ zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
+ clk_disable(xqspi->refclk);
+ clk_disable(xqspi->pclk);
+ return 0;
+}
+
+/**
+ * zynqmp_qspi_chipselect: Select or deselect the chip select line
+ * @qspi: Pointer to the spi_device structure
+ * @is_high: Select(0) or deselect (1) the chip select line
+ */
+static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
+{
+ struct zynqmp_qspi *xqspi = spi_master_get_devdata(qspi->master);
+ ulong timeout;
+ u32 genfifoentry = 0x0, statusreg;
+
+ genfifoentry |= GQSPI_GENFIFO_MODE_SPI;
+ genfifoentry |= xqspi->genfifobus;
+
+ if (!is_high) {
+ genfifoentry |= xqspi->genfifocs;
+ genfifoentry |= GQSPI_GENFIFO_CS_SETUP;
+ } else {
+ genfifoentry |= GQSPI_GENFIFO_CS_HOLD;
+ }
+
+ zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
+
+ /* Dummy generic FIFO entry */
+ zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
+
+ /* Manually start the generic FIFO command */
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
+ GQSPI_CFG_START_GEN_FIFO_MASK);
+
+ timeout = jiffies + msecs_to_jiffies(1000);
+
+ /* Wait until the generic FIFO command is empty */
+ do {
+ statusreg = zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST);
+
+ if ((statusreg & GQSPI_ISR_GENFIFOEMPTY_MASK) &&
+ (statusreg & GQSPI_ISR_TXEMPTY_MASK))
+ break;
+ else
+ cpu_relax();
+ } while (!time_after_eq(jiffies, timeout));
+
+ if (time_after_eq(jiffies, timeout))
+ dev_err(xqspi->dev, "Chip select timed out\n");
+}
+
+/**
+ * zynqmp_qspi_setup_transfer: Configure QSPI controller for specified
+ * transfer
+ * @qspi: Pointer to the spi_device structure
+ * @transfer: Pointer to the spi_transfer structure which provides
+ * information about next transfer setup parameters
+ *
+ * Sets the operational mode of QSPI controller for the next QSPI transfer and
+ * sets the requested clock frequency.
+ *
+ * Return: Always 0
+ *
+ * Note:
+ * If the requested frequency is not an exact match with what can be
+ * obtained using the pre-scalar value, the driver sets the clock
+ * frequency which is lower than the requested frequency (maximum lower)
+ * for the transfer.
+ *
+ * If the requested frequency is higher or lower than that is supported
+ * by the QSPI controller the driver will set the highest or lowest
+ * frequency supported by controller.
+ */
+static int zynqmp_qspi_setup_transfer(struct spi_device *qspi,
+ struct spi_transfer *transfer)
+{
+ struct zynqmp_qspi *xqspi = spi_master_get_devdata(qspi->master);
+ ulong clk_rate;
+ u32 config_reg, req_hz, baud_rate_val = 0;
+
+ if (transfer)
+ req_hz = transfer->speed_hz;
+ else
+ req_hz = qspi->max_speed_hz;
+
+ /* Set the clock frequency */
+ /* If req_hz == 0, default to lowest speed */
+ clk_rate = clk_get_rate(xqspi->refclk);
+
+ while ((baud_rate_val < GQSPI_BAUD_DIV_MAX) &&
+ (clk_rate /
+ (GQSPI_BAUD_DIV_SHIFT << baud_rate_val)) > req_hz)
+ baud_rate_val++;
+
+ config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+
+ /* Set the QSPI clock phase and clock polarity */
+ config_reg &= (~GQSPI_CFG_CLK_PHA_MASK) & (~GQSPI_CFG_CLK_POL_MASK);
+
+ if (qspi->mode & SPI_CPHA)
+ config_reg |= GQSPI_CFG_CLK_PHA_MASK;
+ if (qspi->mode & SPI_CPOL)
+ config_reg |= GQSPI_CFG_CLK_POL_MASK;
+
+ config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK;
+ config_reg |= (baud_rate_val << GQSPI_CFG_BAUD_RATE_DIV_SHIFT);
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+ return 0;
+}
+
+/**
+ * zynqmp_qspi_setup: Configure the QSPI controller
+ * @qspi: Pointer to the spi_device structure
+ *
+ * Sets the operational mode of QSPI controller for the next QSPI transfer,
+ * baud rate and divisor value to setup the requested qspi clock.
+ *
+ * Return: 0 on success; error value otherwise.
+ */
+static int zynqmp_qspi_setup(struct spi_device *qspi)
+{
+ if (qspi->master->busy)
+ return -EBUSY;
+ return 0;
+}
+
+/**
+ * zynqmp_qspi_filltxfifo: Fills the TX FIFO as long as there is room in
+ * the FIFO or the bytes required to be
+ * transmitted.
+ * @xqspi: Pointer to the zynqmp_qspi structure
+ * @size: Number of bytes to be copied from TX buffer to TX FIFO
+ */
+static void zynqmp_qspi_filltxfifo(struct zynqmp_qspi *xqspi, int size)
+{
+ u32 count = 0, intermediate;
+
+ while ((xqspi->bytes_to_transfer > 0) && (count < size)) {
+ memcpy(&intermediate, xqspi->txbuf, 4);
+ zynqmp_gqspi_write(xqspi, GQSPI_TXD_OFST, intermediate);
+
+ if (xqspi->bytes_to_transfer >= 4) {
+ xqspi->txbuf += 4;
+ xqspi->bytes_to_transfer -= 4;
+ } else {
+ xqspi->txbuf += xqspi->bytes_to_transfer;
+ xqspi->bytes_to_transfer = 0;
+ }
+ count++;
+ }
+}
+
+/**
+ * zynqmp_qspi_readrxfifo: Fills the RX FIFO as long as there is room in
+ * the FIFO.
+ * @xqspi: Pointer to the zynqmp_qspi structure
+ * @size: Number of bytes to be copied from RX buffer to RX FIFO
+ */
+static void zynqmp_qspi_readrxfifo(struct zynqmp_qspi *xqspi, u32 size)
+{
+ ulong data;
+ int count = 0;
+
+ while ((count < size) && (xqspi->bytes_to_receive > 0)) {
+ if (xqspi->bytes_to_receive >= 4) {
+ (*(u32 *) xqspi->rxbuf) =
+ zynqmp_gqspi_read(xqspi, GQSPI_RXD_OFST);
+ xqspi->rxbuf += 4;
+ xqspi->bytes_to_receive -= 4;
+ count += 4;
+ } else {
+ data = zynqmp_gqspi_read(xqspi, GQSPI_RXD_OFST);
+ count += xqspi->bytes_to_receive;
+ zynqmp_qspi_copy_read_data(xqspi, data,
+ xqspi->bytes_to_receive);
+ xqspi->bytes_to_receive = 0;
+ }
+ }
+}
+
+/**
+ * zynqmp_process_dma_irq: Handler for DMA done interrupt of QSPI
+ * controller
+ * @xqspi: zynqmp_qspi instance pointer
+ *
+ * This function handles DMA interrupt only.
+ */
+static void zynqmp_process_dma_irq(struct zynqmp_qspi *xqspi)
+{
+ u32 config_reg, genfifoentry;
+
+ dma_unmap_single(xqspi->dev, xqspi->dma_addr,
+ xqspi->dma_rx_bytes, DMA_FROM_DEVICE);
+ xqspi->rxbuf += xqspi->dma_rx_bytes;
+ xqspi->bytes_to_receive -= xqspi->dma_rx_bytes;
+ xqspi->dma_rx_bytes = 0;
+
+ /* Disabling the DMA interrupts */
+ zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_I_DIS_OFST,
+ GQSPI_QSPIDMA_DST_I_EN_DONE_MASK);
+
+ if (xqspi->bytes_to_receive > 0) {
+ /* Switch to IO mode,for remaining bytes to receive */
+ config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+ config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+
+ /* Initiate the transfer of remaining bytes */
+ genfifoentry = xqspi->genfifoentry;
+ genfifoentry |= xqspi->bytes_to_receive;
+ zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
+
+ /* Dummy generic FIFO entry */
+ zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
+
+ /* Manual start */
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ (zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
+ GQSPI_CFG_START_GEN_FIFO_MASK));
+
+ /* Enable the RX interrupts for IO mode */
+ zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+ GQSPI_IER_GENFIFOEMPTY_MASK |
+ GQSPI_IER_RXNEMPTY_MASK |
+ GQSPI_IER_RXEMPTY_MASK);
+ }
+}
+
+/**
+ * zynqmp_qspi_irq: Interrupt service routine of the QSPI controller
+ * @irq: IRQ number
+ * @dev_id: Pointer to the xqspi structure
+ *
+ * This function handles TX empty only.
+ * On TX empty interrupt this function reads the received data from RX FIFO
+ * and fills the TX FIFO if there is any data remaining to be transferred.
+ *
+ * Return: IRQ_HANDLED when interrupt is handled
+ * IRQ_NONE otherwise.
+ */
+static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+ int ret = IRQ_NONE;
+ u32 status, mask, dma_status = 0;
+
+ status = zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST);
+ zynqmp_gqspi_write(xqspi, GQSPI_ISR_OFST, status);
+ mask = (status & ~(zynqmp_gqspi_read(xqspi, GQSPI_IMASK_OFST)));
+
+ /* Read and clear DMA status */
+ if (xqspi->mode == GQSPI_MODE_DMA) {
+ dma_status =
+ zynqmp_gqspi_read(xqspi, GQSPI_QSPIDMA_DST_I_STS_OFST);
+ zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_I_STS_OFST,
+ dma_status);
+ }
+
+ if (mask & GQSPI_ISR_TXNOT_FULL_MASK) {
+ zynqmp_qspi_filltxfifo(xqspi, GQSPI_TX_FIFO_FILL);
+ ret = IRQ_HANDLED;
+ }
+
+ if (dma_status & GQSPI_QSPIDMA_DST_I_STS_DONE_MASK) {
+ zynqmp_process_dma_irq(xqspi);
+ ret = IRQ_HANDLED;
+ } else if (!(mask & GQSPI_IER_RXEMPTY_MASK) &&
+ (mask & GQSPI_IER_GENFIFOEMPTY_MASK)) {
+ zynqmp_qspi_readrxfifo(xqspi, GQSPI_RX_FIFO_FILL);
+ ret = IRQ_HANDLED;
+ }
+
+ if ((xqspi->bytes_to_receive == 0) && (xqspi->bytes_to_transfer == 0)
+ && ((status & GQSPI_IRQ_MASK) == GQSPI_IRQ_MASK)) {
+ zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_ISR_IDR_MASK);
+ spi_finalize_current_transfer(master);
+ ret = IRQ_HANDLED;
+ }
+ return ret;
+}
+
+/**
+ * zynqmp_qspi_selectspimode: Selects SPI mode - x1 or x2 or x4.
+ * @xqspi: xqspi is a pointer to the GQSPI instance
+ * @spimode: spimode - SPI or DUAL or QUAD.
+ * Return: Mask to set desired SPI mode in GENFIFO entry.
+ */
+static inline u32 zynqmp_qspi_selectspimode(struct zynqmp_qspi *xqspi,
+ u8 spimode)
+{
+ u32 mask = 0;
+
+ switch (spimode) {
+ case GQSPI_SELECT_MODE_DUALSPI:
+ mask = GQSPI_GENFIFO_MODE_DUALSPI;
+ break;
+ case GQSPI_SELECT_MODE_QUADSPI:
+ mask = GQSPI_GENFIFO_MODE_QUADSPI;
+ break;
+ case GQSPI_SELECT_MODE_SPI:
+ mask = GQSPI_GENFIFO_MODE_SPI;
+ break;
+ default:
+ dev_warn(xqspi->dev, "Invalid SPI mode\n");
+ }
+
+ return mask;
+}
+
+/**
+ * zynq_qspi_setuprxdma: This function sets up the RX DMA operation
+ * @xqspi: xqspi is a pointer to the GQSPI instance.
+ */
+static void zynq_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
+{
+ u32 rx_bytes, rx_rem, config_reg;
+ dma_addr_t addr;
+ u64 dma_align = (u64)(uintptr_t)xqspi->rxbuf;
+
+ if ((xqspi->bytes_to_receive < 8) ||
+ ((dma_align & GQSPI_DMA_UNALIGN) != 0x0)) {
+ /* Setting to IO mode */
+ config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+ config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+ xqspi->mode = GQSPI_MODE_IO;
+ xqspi->dma_rx_bytes = 0;
+ return;
+ }
+
+ rx_rem = xqspi->bytes_to_receive % 4;
+ rx_bytes = (xqspi->bytes_to_receive - rx_rem);
+
+ addr = dma_map_single(xqspi->dev, (void *)xqspi->rxbuf,
+ rx_bytes, DMA_FROM_DEVICE);
+ if (dma_mapping_error(xqspi->dev, addr))
+ dev_err(xqspi->dev, "ERR:rxdma:memory not mapped\n");
+
+ xqspi->dma_rx_bytes = rx_bytes;
+ xqspi->dma_addr = addr;
+ zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_ADDR_OFST,
+ (u32)(addr & 0xffffffff));
+ addr = ((addr >> 16) >> 16);
+ zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_ADDR_MSB_OFST,
+ ((u32)addr) & 0xfff);
+
+ /* Enabling the DMA mode */
+ config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+ config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+ config_reg |= GQSPI_CFG_MODE_EN_DMA_MASK;
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+
+ /* Switch to DMA mode */
+ xqspi->mode = GQSPI_MODE_DMA;
+
+ /* Write the number of bytes to transfer */
+ zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_SIZE_OFST, rx_bytes);
+}
+
+/**
+ * zynqmp_qspi_txrxsetup: This function checks the TX/RX buffers in
+ * the transfer and sets up the GENFIFO entries,
+ * TX FIFO as required.
+ * @xqspi: xqspi is a pointer to the GQSPI instance.
+ * @transfer: It is a pointer to the structure containing transfer data.
+ * @genfifoentry: genfifoentry is pointer to the variable in which
+ * GENFIFO mask is returned to calling function
+ */
+static void zynqmp_qspi_txrxsetup(struct zynqmp_qspi *xqspi,
+ struct spi_transfer *transfer,
+ u32 *genfifoentry)
+{
+ u32 config_reg;
+
+ /* Transmit */
+ if ((xqspi->txbuf != NULL) && (xqspi->rxbuf == NULL)) {
+ /* Setup data to be TXed */
+ *genfifoentry &= ~GQSPI_GENFIFO_RX;
+ *genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
+ *genfifoentry |= GQSPI_GENFIFO_TX;
+ *genfifoentry |=
+ zynqmp_qspi_selectspimode(xqspi, transfer->tx_nbits);
+ xqspi->bytes_to_transfer = transfer->len;
+ if (xqspi->mode == GQSPI_MODE_DMA) {
+ config_reg = zynqmp_gqspi_read(xqspi,
+ GQSPI_CONFIG_OFST);
+ config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ config_reg);
+ xqspi->mode = GQSPI_MODE_IO;
+ }
+ zynqmp_qspi_filltxfifo(xqspi, GQSPI_TXD_DEPTH);
+ /* Discard RX data */
+ xqspi->bytes_to_receive = 0;
+ } else if ((xqspi->txbuf == NULL) && (xqspi->rxbuf != NULL)) {
+ /* Receive */
+
+ /* TX auto fill */
+ *genfifoentry &= ~GQSPI_GENFIFO_TX;
+ /* Setup RX */
+ *genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
+ *genfifoentry |= GQSPI_GENFIFO_RX;
+ *genfifoentry |=
+ zynqmp_qspi_selectspimode(xqspi, transfer->rx_nbits);
+ xqspi->bytes_to_transfer = 0;
+ xqspi->bytes_to_receive = transfer->len;
+ zynq_qspi_setuprxdma(xqspi);
+ }
+}
+
+/**
+ * zynqmp_qspi_start_transfer: Initiates the QSPI transfer
+ * @master: Pointer to the spi_master structure which provides
+ * information about the controller.
+ * @qspi: Pointer to the spi_device structure
+ * @transfer: Pointer to the spi_transfer structure which provide information
+ * about next transfer parameters
+ *
+ * This function fills the TX FIFO, starts the QSPI transfer, and waits for the
+ * transfer to be completed.
+ *
+ * Return: Number of bytes transferred in the last transfer
+ */
+static int zynqmp_qspi_start_transfer(struct spi_master *master,
+ struct spi_device *qspi,
+ struct spi_transfer *transfer)
+{
+ struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+ u32 genfifoentry = 0x0, transfer_len;
+
+ xqspi->txbuf = transfer->tx_buf;
+ xqspi->rxbuf = transfer->rx_buf;
+
+ zynqmp_qspi_setup_transfer(qspi, transfer);
+
+ genfifoentry |= xqspi->genfifocs;
+ genfifoentry |= xqspi->genfifobus;
+
+ zynqmp_qspi_txrxsetup(xqspi, transfer, &genfifoentry);
+
+ if (xqspi->mode == GQSPI_MODE_DMA)
+ transfer_len = xqspi->dma_rx_bytes;
+ else
+ transfer_len = transfer->len;
+
+ xqspi->genfifoentry = genfifoentry;
+ if ((transfer_len) < GQSPI_GENFIFO_IMM_DATA_MASK) {
+ genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
+ genfifoentry |= transfer_len;
+ zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
+ } else {
+ int tempcount = transfer_len;
+ u32 exponent = 8; /* 2^8 = 256 */
+ u8 imm_data = tempcount & 0xFF;
+
+ tempcount &= ~(tempcount & 0xFF);
+ /* Immediate entry */
+ if (tempcount != 0) {
+ /* Exponent entries */
+ genfifoentry |= GQSPI_GENFIFO_EXP;
+ while (tempcount != 0) {
+ if (tempcount & GQSPI_GENFIFO_EXP_START) {
+ genfifoentry &=
+ ~GQSPI_GENFIFO_IMM_DATA_MASK;
+ genfifoentry |= exponent;
+ zynqmp_gqspi_write(xqspi,
+ GQSPI_GEN_FIFO_OFST,
+ genfifoentry);
+ }
+ tempcount = tempcount >> 1;
+ exponent++;
+ }
+ }
+ if (imm_data != 0) {
+ genfifoentry &= ~GQSPI_GENFIFO_EXP;
+ genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
+ genfifoentry |= (u8) (imm_data & 0xFF);
+ zynqmp_gqspi_write(xqspi,
+ GQSPI_GEN_FIFO_OFST, genfifoentry);
+ }
+ }
+
+ if ((xqspi->mode == GQSPI_MODE_IO) &&
+ (xqspi->rxbuf != NULL)) {
+ /* Dummy generic FIFO entry */
+ zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
+ }
+
+ /* Since we are using manual mode */
+ zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+ zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
+ GQSPI_CFG_START_GEN_FIFO_MASK);
+
+ if (xqspi->txbuf != NULL)
+ /* Enable interrupts for TX */
+ zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+ GQSPI_IER_TXEMPTY_MASK |
+ GQSPI_IER_GENFIFOEMPTY_MASK |
+ GQSPI_IER_TXNOT_FULL_MASK);
+
+ if (xqspi->rxbuf != NULL) {
+ /* Enable interrupts for RX */
+ if (xqspi->mode == GQSPI_MODE_DMA) {
+ /* Enable DMA interrupts */
+ zynqmp_gqspi_write(xqspi,
+ GQSPI_QSPIDMA_DST_I_EN_OFST,
+ GQSPI_QSPIDMA_DST_I_EN_DONE_MASK);
+ } else {
+ zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+ GQSPI_IER_GENFIFOEMPTY_MASK |
+ GQSPI_IER_RXNEMPTY_MASK |
+ GQSPI_IER_RXEMPTY_MASK);
+ }
+ }
+
+ return transfer->len;
+}
+
+/**
+ * zynqmp_qspi_suspend: Suspend method for the QSPI driver
+ * @_dev: Address of the platform_device structure
+ *
+ * This function stops the QSPI driver queue and disables the QSPI controller
+ *
+ * Return: Always 0
+ */
+static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device,
+ dev);
+ struct spi_master *master = platform_get_drvdata(pdev);
+
+ spi_master_suspend(master);
+
+ zynqmp_unprepare_transfer_hardware(master);
+
+ return 0;
+}
+
+/**
+ * zynqmp_qspi_resume: Resume method for the QSPI driver
+ * @dev: Address of the platform_device structure
+ *
+ * The function starts the QSPI driver queue and initializes the QSPI
+ * controller
+ *
+ * Return: 0 on success; error value otherwise
+ */
+static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device,
+ dev);
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+ int ret = 0;
+
+ ret = clk_enable(xqspi->pclk);
+ if (ret) {
+ dev_err(dev, "Cannot enable APB clock.\n");
+ return ret;
+ }
+
+ ret = clk_enable(xqspi->refclk);
+ if (ret) {
+ dev_err(dev, "Cannot enable device clock.\n");
+ clk_disable(xqspi->pclk);
+ return ret;
+ }
+
+ spi_master_resume(master);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(zynqmp_qspi_dev_pm_ops, zynqmp_qspi_suspend,
+ zynqmp_qspi_resume);
+
+/**
+ * zynqmp_qspi_probe: Probe method for the QSPI driver
+ * @pdev: Pointer to the platform_device structure
+ *
+ * This function initializes the driver data structures and the hardware.
+ *
+ * Return: 0 on success; error value otherwise
+ */
+static int zynqmp_qspi_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct spi_master *master;
+ struct zynqmp_qspi *xqspi;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
+ if (!master)
+ return -ENOMEM;
+
+ xqspi = spi_master_get_devdata(master);
+ master->dev.of_node = pdev->dev.of_node;
+ platform_set_drvdata(pdev, master);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ xqspi->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(xqspi->regs)) {
+ ret = PTR_ERR(xqspi->regs);
+ goto remove_master;
+ }
+
+ xqspi->dev = dev;
+ xqspi->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(xqspi->pclk)) {
+ dev_err(dev, "pclk clock not found.\n");
+ ret = PTR_ERR(xqspi->pclk);
+ goto remove_master;
+ }
+
+ ret = clk_prepare_enable(xqspi->pclk);
+ if (ret) {
+ dev_err(dev, "Unable to enable APB clock.\n");
+ goto remove_master;
+ }
+
+ xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk");
+ if (IS_ERR(xqspi->refclk)) {
+ dev_err(dev, "ref_clk clock not found.\n");
+ ret = PTR_ERR(xqspi->refclk);
+ goto clk_dis_pclk;
+ }
+
+ ret = clk_prepare_enable(xqspi->refclk);
+ if (ret) {
+ dev_err(dev, "Unable to enable device clock.\n");
+ goto clk_dis_pclk;
+ }
+
+ /* QSPI controller initializations */
+ zynqmp_qspi_init_hw(xqspi);
+
+ xqspi->irq = platform_get_irq(pdev, 0);
+ if (xqspi->irq <= 0) {
+ ret = -ENXIO;
+ dev_err(dev, "irq resource not found\n");
+ goto clk_dis_all;
+ }
+ ret = devm_request_irq(&pdev->dev, xqspi->irq, zynqmp_qspi_irq,
+ 0, pdev->name, master);
+ if (ret != 0) {
+ ret = -ENXIO;
+ dev_err(dev, "request_irq failed\n");
+ goto clk_dis_all;
+ }
+
+ master->num_chipselect = GQSPI_DEFAULT_NUM_CS;
+
+ master->setup = zynqmp_qspi_setup;
+ master->set_cs = zynqmp_qspi_chipselect;
+ master->transfer_one = zynqmp_qspi_start_transfer;
+ master->prepare_transfer_hardware = zynqmp_prepare_transfer_hardware;
+ master->unprepare_transfer_hardware =
+ zynqmp_unprepare_transfer_hardware;
+ master->max_speed_hz = clk_get_rate(xqspi->refclk) / 2;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
+ SPI_TX_DUAL | SPI_TX_QUAD;
+
+ if (master->dev.parent == NULL)
+ master->dev.parent = &master->dev;
+
+ ret = spi_register_master(master);
+ if (ret)
+ goto clk_dis_all;
+
+ return 0;
+
+clk_dis_all:
+ clk_disable_unprepare(xqspi->refclk);
+clk_dis_pclk:
+ clk_disable_unprepare(xqspi->pclk);
+remove_master:
+ spi_master_put(master);
+
+ return ret;
+}
+
+/**
+ * zynqmp_qspi_remove: Remove method for the QSPI driver
+ * @pdev: Pointer to the platform_device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees all resources allocated to
+ * the device.
+ *
+ * Return: 0 Always
+ */
+static int zynqmp_qspi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+
+ zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
+ clk_disable_unprepare(xqspi->refclk);
+ clk_disable_unprepare(xqspi->pclk);
+
+ spi_unregister_master(master);
+
+ return 0;
+}
+
+static const struct of_device_id zynqmp_qspi_of_match[] = {
+ { .compatible = "xlnx,zynqmp-qspi-1.0", },
+ { /* End of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, zynqmp_qspi_of_match);
+
+static struct platform_driver zynqmp_qspi_driver = {
+ .probe = zynqmp_qspi_probe,
+ .remove = zynqmp_qspi_remove,
+ .driver = {
+ .name = "zynqmp-qspi",
+ .of_match_table = zynqmp_qspi_of_match,
+ .pm = &zynqmp_qspi_dev_pm_ops,
+ },
+};
+
+module_platform_driver(zynqmp_qspi_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx Zynqmp QSPI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index d35c1a132..cf8b91b23 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -571,7 +571,7 @@ static int __spi_map_msg(struct spi_master *master, struct spi_message *msg)
return 0;
}
-static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
+static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
{
struct spi_transfer *xfer;
struct device *tx_dev, *rx_dev;
@@ -583,15 +583,6 @@ static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
rx_dev = master->dma_rx->device->dev;
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- /*
- * Restore the original value of tx_buf or rx_buf if they are
- * NULL.
- */
- if (xfer->tx_buf == master->dummy_tx)
- xfer->tx_buf = NULL;
- if (xfer->rx_buf == master->dummy_rx)
- xfer->rx_buf = NULL;
-
if (!master->can_dma(master, msg->spi, xfer))
continue;
@@ -608,13 +599,32 @@ static inline int __spi_map_msg(struct spi_master *master,
return 0;
}
-static inline int spi_unmap_msg(struct spi_master *master,
- struct spi_message *msg)
+static inline int __spi_unmap_msg(struct spi_master *master,
+ struct spi_message *msg)
{
return 0;
}
#endif /* !CONFIG_HAS_DMA */
+static inline int spi_unmap_msg(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct spi_transfer *xfer;
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ /*
+ * Restore the original value of tx_buf or rx_buf if they are
+ * NULL.
+ */
+ if (xfer->tx_buf == master->dummy_tx)
+ xfer->tx_buf = NULL;
+ if (xfer->rx_buf == master->dummy_rx)
+ xfer->rx_buf = NULL;
+ }
+
+ return __spi_unmap_msg(master, msg);
+}
+
static int spi_map_msg(struct spi_master *master, struct spi_message *msg)
{
struct spi_transfer *xfer;
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 92c909eed..c7de64171 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -95,37 +95,25 @@ MODULE_PARM_DESC(bufsiz, "data bytes in biggest supported SPI message");
/*-------------------------------------------------------------------------*/
-/*
- * We can't use the standard synchronous wrappers for file I/O; we
- * need to protect against async removal of the underlying spi_device.
- */
-static void spidev_complete(void *arg)
-{
- complete(arg);
-}
-
static ssize_t
spidev_sync(struct spidev_data *spidev, struct spi_message *message)
{
DECLARE_COMPLETION_ONSTACK(done);
int status;
-
- message->complete = spidev_complete;
- message->context = &done;
+ struct spi_device *spi;
spin_lock_irq(&spidev->spi_lock);
- if (spidev->spi == NULL)
+ spi = spidev->spi;
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (spi == NULL)
status = -ESHUTDOWN;
else
- status = spi_async(spidev->spi, message);
- spin_unlock_irq(&spidev->spi_lock);
+ status = spi_sync(spi, message);
+
+ if (status == 0)
+ status = message->actual_length;
- if (status == 0) {
- wait_for_completion(&done);
- status = message->status;
- if (status == 0)
- status = message->actual_length;
- }
return status;
}
@@ -647,7 +635,6 @@ err_find_dev:
static int spidev_release(struct inode *inode, struct file *filp)
{
struct spidev_data *spidev;
- int status = 0;
mutex_lock(&device_list_lock);
spidev = filp->private_data;
@@ -676,7 +663,7 @@ static int spidev_release(struct inode *inode, struct file *filp)
}
mutex_unlock(&device_list_lock);
- return status;
+ return 0;
}
static const struct file_operations spidev_fops = {
@@ -706,6 +693,7 @@ static struct class *spidev_class;
#ifdef CONFIG_OF
static const struct of_device_id spidev_dt_ids[] = {
{ .compatible = "rohm,dh2228fv" },
+ { .compatible = "lineartechnology,ltc2488" },
{},
};
MODULE_DEVICE_TABLE(of, spidev_dt_ids);