summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci-hub.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-01-20 14:01:31 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-01-20 14:01:31 -0300
commitb4b7ff4b08e691656c9d77c758fc355833128ac0 (patch)
tree82fcb00e6b918026dc9f2d1f05ed8eee83874cc0 /drivers/usb/host/xhci-hub.c
parent35acfa0fc609f2a2cd95cef4a6a9c3a5c38f1778 (diff)
Linux-libre 4.4-gnupck-4.4-gnu
Diffstat (limited to 'drivers/usb/host/xhci-hub.c')
-rw-r--r--drivers/usb/host/xhci-hub.c245
1 files changed, 201 insertions, 44 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 78241b555..f980c239e 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -31,13 +31,15 @@
#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
PORT_RC | PORT_PLC | PORT_PE)
-/* USB 3.0 BOS descriptor and a capability descriptor, combined */
+/* USB 3 BOS descriptor and a capability descriptors, combined.
+ * Fields will be adjusted and added later in xhci_create_usb3_bos_desc()
+ */
static u8 usb_bos_descriptor [] = {
USB_DT_BOS_SIZE, /* __u8 bLength, 5 bytes */
USB_DT_BOS, /* __u8 bDescriptorType */
0x0F, 0x00, /* __le16 wTotalLength, 15 bytes */
0x1, /* __u8 bNumDeviceCaps */
- /* First device capability */
+ /* First device capability, SuperSpeed */
USB_DT_USB_SS_CAP_SIZE, /* __u8 bLength, 10 bytes */
USB_DT_DEVICE_CAPABILITY, /* Device Capability */
USB_SS_CAP_TYPE, /* bDevCapabilityType, SUPERSPEED_USB */
@@ -46,9 +48,108 @@ static u8 usb_bos_descriptor [] = {
0x03, /* bFunctionalitySupport,
USB 3.0 speed only */
0x00, /* bU1DevExitLat, set later. */
- 0x00, 0x00 /* __le16 bU2DevExitLat, set later. */
+ 0x00, 0x00, /* __le16 bU2DevExitLat, set later. */
+ /* Second device capability, SuperSpeedPlus */
+ 0x0c, /* bLength 12, will be adjusted later */
+ USB_DT_DEVICE_CAPABILITY, /* Device Capability */
+ USB_SSP_CAP_TYPE, /* bDevCapabilityType SUPERSPEED_PLUS */
+ 0x00, /* bReserved 0 */
+ 0x00, 0x00, 0x00, 0x00, /* bmAttributes, get from xhci psic */
+ 0x00, 0x00, /* wFunctionalitySupport */
+ 0x00, 0x00, /* wReserved 0 */
+ /* Sublink Speed Attributes are added in xhci_create_usb3_bos_desc() */
};
+static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf,
+ u16 wLength)
+{
+ int i, ssa_count;
+ u32 temp;
+ u16 desc_size, ssp_cap_size, ssa_size = 0;
+ bool usb3_1 = false;
+
+ desc_size = USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
+ ssp_cap_size = sizeof(usb_bos_descriptor) - desc_size;
+
+ /* does xhci support USB 3.1 Enhanced SuperSpeed */
+ if (xhci->usb3_rhub.min_rev >= 0x01 && xhci->usb3_rhub.psi_uid_count) {
+ /* two SSA entries for each unique PSI ID, one RX and one TX */
+ ssa_count = xhci->usb3_rhub.psi_uid_count * 2;
+ ssa_size = ssa_count * sizeof(u32);
+ desc_size += ssp_cap_size;
+ usb3_1 = true;
+ }
+ memcpy(buf, &usb_bos_descriptor, min(desc_size, wLength));
+
+ if (usb3_1) {
+ /* modify bos descriptor bNumDeviceCaps and wTotalLength */
+ buf[4] += 1;
+ put_unaligned_le16(desc_size + ssa_size, &buf[2]);
+ }
+
+ if (wLength < USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE)
+ return wLength;
+
+ /* Indicate whether the host has LTM support. */
+ temp = readl(&xhci->cap_regs->hcc_params);
+ if (HCC_LTC(temp))
+ buf[8] |= USB_LTM_SUPPORT;
+
+ /* Set the U1 and U2 exit latencies. */
+ if ((xhci->quirks & XHCI_LPM_SUPPORT)) {
+ temp = readl(&xhci->cap_regs->hcs_params3);
+ buf[12] = HCS_U1_LATENCY(temp);
+ put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
+ }
+
+ if (usb3_1) {
+ u32 ssp_cap_base, bm_attrib, psi;
+ int offset;
+
+ ssp_cap_base = USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
+
+ if (wLength < desc_size)
+ return wLength;
+ buf[ssp_cap_base] = ssp_cap_size + ssa_size;
+
+ /* attribute count SSAC bits 4:0 and ID count SSIC bits 8:5 */
+ bm_attrib = (ssa_count - 1) & 0x1f;
+ bm_attrib |= (xhci->usb3_rhub.psi_uid_count - 1) << 5;
+ put_unaligned_le32(bm_attrib, &buf[ssp_cap_base + 4]);
+
+ if (wLength < desc_size + ssa_size)
+ return wLength;
+ /*
+ * Create the Sublink Speed Attributes (SSA) array.
+ * The xhci PSI field and USB 3.1 SSA fields are very similar,
+ * but link type bits 7:6 differ for values 01b and 10b.
+ * xhci has also only one PSI entry for a symmetric link when
+ * USB 3.1 requires two SSA entries (RX and TX) for every link
+ */
+ offset = desc_size;
+ for (i = 0; i < xhci->usb3_rhub.psi_count; i++) {
+ psi = xhci->usb3_rhub.psi[i];
+ psi &= ~USB_SSP_SUBLINK_SPEED_RSVD;
+ if ((psi & PLT_MASK) == PLT_SYM) {
+ /* Symmetric, create SSA RX and TX from one PSI entry */
+ put_unaligned_le32(psi, &buf[offset]);
+ psi |= 1 << 7; /* turn entry to TX */
+ offset += 4;
+ if (offset >= desc_size + ssa_size)
+ return desc_size + ssa_size;
+ } else if ((psi & PLT_MASK) == PLT_ASYM_RX) {
+ /* Asymetric RX, flip bits 7:6 for SSA */
+ psi ^= PLT_MASK;
+ }
+ put_unaligned_le32(psi, &buf[offset]);
+ offset += 4;
+ if (offset >= desc_size + ssa_size)
+ return desc_size + ssa_size;
+ }
+ }
+ /* ssa_size is 0 for other than usb 3.1 hosts */
+ return desc_size + ssa_size;
+}
static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc, int ports)
@@ -161,7 +262,7 @@ static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc)
{
- if (hcd->speed == HCD_USB3)
+ if (hcd->speed >= HCD_USB3)
xhci_usb3_hub_descriptor(hcd, xhci, desc);
else
xhci_usb2_hub_descriptor(hcd, xhci, desc);
@@ -250,7 +351,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
if (!xhci->devs[i])
continue;
speed = xhci->devs[i]->udev->speed;
- if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
+ if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))
&& xhci->devs[i]->fake_port == port) {
slot_id = i;
break;
@@ -339,7 +440,7 @@ static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
u16 wIndex, __le32 __iomem *addr, u32 port_status)
{
/* Don't allow the USB core to disable SuperSpeed ports. */
- if (hcd->speed == HCD_USB3) {
+ if (hcd->speed >= HCD_USB3) {
xhci_dbg(xhci, "Ignoring request to disable "
"SuperSpeed port.\n");
return;
@@ -407,7 +508,7 @@ static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array)
int max_ports;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- if (hcd->speed == HCD_USB3) {
+ if (hcd->speed >= HCD_USB3) {
max_ports = xhci->num_usb3_ports;
*port_array = xhci->usb3_ports;
} else {
@@ -558,6 +659,22 @@ static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status,
}
}
+static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li)
+{
+ u32 ext_stat = 0;
+ int speed_id;
+
+ /* only support rx and tx lane counts of 1 in usb3.1 spec */
+ speed_id = DEV_PORT_SPEED(raw_port_status);
+ ext_stat |= speed_id; /* bits 3:0, RX speed id */
+ ext_stat |= speed_id << 4; /* bits 7:4, TX speed id */
+
+ ext_stat |= PORT_RX_LANES(port_li) << 8; /* bits 11:8 Rx lane count */
+ ext_stat |= PORT_TX_LANES(port_li) << 12; /* bits 15:12 Tx lane count */
+
+ return ext_stat;
+}
+
/*
* Converts a raw xHCI port status into the format that external USB 2.0 or USB
* 3.0 hubs use.
@@ -590,7 +707,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
if ((raw_port_status & PORT_RC))
status |= USB_PORT_STAT_C_RESET << 16;
/* USB3.0 only */
- if (hcd->speed == HCD_USB3) {
+ if (hcd->speed >= HCD_USB3) {
/* Port link change with port in resume state should not be
* reported to usbcore, as this is an internal state to be
* handled by xhci driver. Reporting PLC to usbcore may
@@ -606,18 +723,40 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
}
- if (hcd->speed != HCD_USB3) {
+ if (hcd->speed < HCD_USB3) {
if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3
&& (raw_port_status & PORT_POWER))
status |= USB_PORT_STAT_SUSPEND;
}
if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
- !DEV_SUPERSPEED(raw_port_status)) {
+ !DEV_SUPERSPEED_ANY(raw_port_status)) {
if ((raw_port_status & PORT_RESET) ||
!(raw_port_status & PORT_PE))
return 0xffffffff;
- if (time_after_eq(jiffies,
- bus_state->resume_done[wIndex])) {
+ /* did port event handler already start resume timing? */
+ if (!bus_state->resume_done[wIndex]) {
+ /* If not, maybe we are in a host initated resume? */
+ if (test_bit(wIndex, &bus_state->resuming_ports)) {
+ /* Host initated resume doesn't time the resume
+ * signalling using resume_done[].
+ * It manually sets RESUME state, sleeps 20ms
+ * and sets U0 state. This should probably be
+ * changed, but not right now.
+ */
+ } else {
+ /* port resume was discovered now and here,
+ * start resume timing
+ */
+ unsigned long timeout = jiffies +
+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
+
+ set_bit(wIndex, &bus_state->resuming_ports);
+ bus_state->resume_done[wIndex] = timeout;
+ mod_timer(&hcd->rh_timer, timeout);
+ }
+ /* Has resume been signalled for USB_RESUME_TIME yet? */
+ } else if (time_after_eq(jiffies,
+ bus_state->resume_done[wIndex])) {
int time_left;
xhci_dbg(xhci, "Resume USB2 port %d\n",
@@ -658,19 +797,35 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
} else {
/*
* The resume has been signaling for less than
- * 20ms. Report the port status as SUSPEND,
- * let the usbcore check port status again
- * and clear resume signaling later.
+ * USB_RESUME_TIME. Report the port status as SUSPEND,
+ * let the usbcore check port status again and clear
+ * resume signaling later.
*/
status |= USB_PORT_STAT_SUSPEND;
}
}
- if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0
- && (raw_port_status & PORT_POWER)
- && (bus_state->suspended_ports & (1 << wIndex))) {
- bus_state->suspended_ports &= ~(1 << wIndex);
- if (hcd->speed != HCD_USB3)
- bus_state->port_c_suspend |= 1 << wIndex;
+ /*
+ * Clear stale usb2 resume signalling variables in case port changed
+ * state during resume signalling. For example on error
+ */
+ if ((bus_state->resume_done[wIndex] ||
+ test_bit(wIndex, &bus_state->resuming_ports)) &&
+ (raw_port_status & PORT_PLS_MASK) != XDEV_U3 &&
+ (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) {
+ bus_state->resume_done[wIndex] = 0;
+ clear_bit(wIndex, &bus_state->resuming_ports);
+ }
+
+
+ if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 &&
+ (raw_port_status & PORT_POWER)) {
+ if (bus_state->suspended_ports & (1 << wIndex)) {
+ bus_state->suspended_ports &= ~(1 << wIndex);
+ if (hcd->speed < HCD_USB3)
+ bus_state->port_c_suspend |= 1 << wIndex;
+ }
+ bus_state->resume_done[wIndex] = 0;
+ clear_bit(wIndex, &bus_state->resuming_ports);
}
if (raw_port_status & PORT_CONNECT) {
status |= USB_PORT_STAT_CONNECTION;
@@ -683,13 +838,13 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
if (raw_port_status & PORT_RESET)
status |= USB_PORT_STAT_RESET;
if (raw_port_status & PORT_POWER) {
- if (hcd->speed == HCD_USB3)
+ if (hcd->speed >= HCD_USB3)
status |= USB_SS_PORT_STAT_POWER;
else
status |= USB_PORT_STAT_POWER;
}
/* Update Port Link State */
- if (hcd->speed == HCD_USB3) {
+ if (hcd->speed >= HCD_USB3) {
xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status);
/*
* Verify if all USB3 Ports Have entered U0 already.
@@ -734,7 +889,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
* descriptor for the USB 3.0 roothub. If not, we stall the
* endpoint, like external hubs do.
*/
- if (hcd->speed == HCD_USB3 &&
+ if (hcd->speed >= HCD_USB3 &&
(wLength < USB_DT_SS_HUB_SIZE ||
wValue != (USB_DT_SS_HUB << 8))) {
xhci_dbg(xhci, "Wrong hub descriptor type for "
@@ -748,25 +903,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
if ((wValue & 0xff00) != (USB_DT_BOS << 8))
goto error;
- if (hcd->speed != HCD_USB3)
+ if (hcd->speed < HCD_USB3)
goto error;
- /* Set the U1 and U2 exit latencies. */
- memcpy(buf, &usb_bos_descriptor,
- USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
- if ((xhci->quirks & XHCI_LPM_SUPPORT)) {
- temp = readl(&xhci->cap_regs->hcs_params3);
- buf[12] = HCS_U1_LATENCY(temp);
- put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
- }
-
- /* Indicate whether the host has LTM support. */
- temp = readl(&xhci->cap_regs->hcc_params);
- if (HCC_LTC(temp))
- buf[8] |= USB_LTM_SUPPORT;
-
+ retval = xhci_create_usb3_bos_desc(xhci, buf, wLength);
spin_unlock_irqrestore(&xhci->lock, flags);
- return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
+ return retval;
case GetPortStatus:
if (!wIndex || wIndex > max_ports)
goto error;
@@ -786,6 +928,19 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+ /* if USB 3.1 extended port status return additional 4 bytes */
+ if (wValue == 0x02) {
+ u32 port_li;
+
+ if (hcd->speed < HCD_USB31 || wLength != 8) {
+ xhci_err(xhci, "get ext port status invalid parameter\n");
+ retval = -EINVAL;
+ break;
+ }
+ port_li = readl(port_array[wIndex] + PORTLI);
+ status = xhci_get_ext_port_status(temp, port_li);
+ put_unaligned_le32(cpu_to_le32(status), &buf[4]);
+ }
break;
case SetPortFeature:
if (wValue == USB_PORT_FEAT_LINK_STATE)
@@ -952,7 +1107,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = readl(port_array[wIndex]);
break;
case USB_PORT_FEAT_U1_TIMEOUT:
- if (hcd->speed != HCD_USB3)
+ if (hcd->speed < HCD_USB3)
goto error;
temp = readl(port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U1_TIMEOUT_MASK;
@@ -960,7 +1115,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
writel(temp, port_array[wIndex] + PORTPMSC);
break;
case USB_PORT_FEAT_U2_TIMEOUT:
- if (hcd->speed != HCD_USB3)
+ if (hcd->speed < HCD_USB3)
goto error;
temp = readl(port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U2_TIMEOUT_MASK;
@@ -995,6 +1150,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
if ((temp & PORT_PE) == 0)
goto error;
+ set_bit(wIndex, &bus_state->resuming_ports);
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_RESUME);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -1002,6 +1158,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
spin_lock_irqsave(&xhci->lock, flags);
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
+ clear_bit(wIndex, &bus_state->resuming_ports);
}
bus_state->port_c_suspend |= 1 << wIndex;
@@ -1223,14 +1380,14 @@ int xhci_bus_resume(struct usb_hcd *hcd)
u32 temp;
temp = readl(port_array[port_index]);
- if (DEV_SUPERSPEED(temp))
+ if (DEV_SUPERSPEED_ANY(temp))
temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
else
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
if (test_bit(port_index, &bus_state->bus_suspended) &&
(temp & PORT_PLS_MASK)) {
set_bit(port_index, &port_was_suspended);
- if (!DEV_SUPERSPEED(temp)) {
+ if (!DEV_SUPERSPEED_ANY(temp)) {
xhci_set_link_state(xhci, port_array,
port_index, XDEV_RESUME);
need_usb2_u3_exit = true;