Initial import

1 files changed, 491 insertions, 0 deletions

diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
new file mode 100644
index 000000000..ef0dbf070
--- /dev/null
+++ b/drivers/usb/serial/spcp8x5.c
@@ -0,0 +1,491 @@
+/*
+ * spcp8x5 USB to serial adaptor driver
+ *
+ * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
+ * Copyright (C) 2006 S1 Corp.
+ *
+ * Original driver for 2.6.10 pl2303 driver by
+ *   Greg Kroah-Hartman (greg@kroah.com)
+ * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_DESC	"SPCP8x5 USB to serial adaptor driver"
+
+#define SPCP825_QUIRK_NO_UART_STATUS	0x01
+#define SPCP825_QUIRK_NO_WORK_MODE	0x02
+
+#define SPCP8x5_007_VID		0x04FC
+#define SPCP8x5_007_PID		0x0201
+#define SPCP8x5_008_VID		0x04fc
+#define SPCP8x5_008_PID		0x0235
+#define SPCP8x5_PHILIPS_VID	0x0471
+#define SPCP8x5_PHILIPS_PID	0x081e
+#define SPCP8x5_INTERMATIC_VID	0x04FC
+#define SPCP8x5_INTERMATIC_PID	0x0204
+#define SPCP8x5_835_VID		0x04fc
+#define SPCP8x5_835_PID		0x0231
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
+	{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
+	{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
+	{ USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
+	{ USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
+	  .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
+				SPCP825_QUIRK_NO_WORK_MODE },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct spcp8x5_usb_ctrl_arg {
+	u8	type;
+	u8	cmd;
+	u8	cmd_type;
+	u16	value;
+	u16	index;
+	u16	length;
+};
+
+
+/* spcp8x5 spec register define */
+#define MCR_CONTROL_LINE_RTS		0x02
+#define MCR_CONTROL_LINE_DTR		0x01
+#define MCR_DTR				0x01
+#define MCR_RTS				0x02
+
+#define MSR_STATUS_LINE_DCD		0x80
+#define MSR_STATUS_LINE_RI		0x40
+#define MSR_STATUS_LINE_DSR		0x20
+#define MSR_STATUS_LINE_CTS		0x10
+
+/* verdor command here , we should define myself */
+#define SET_DEFAULT			0x40
+#define SET_DEFAULT_TYPE		0x20
+
+#define SET_UART_FORMAT			0x40
+#define SET_UART_FORMAT_TYPE		0x21
+#define SET_UART_FORMAT_SIZE_5		0x00
+#define SET_UART_FORMAT_SIZE_6		0x01
+#define SET_UART_FORMAT_SIZE_7		0x02
+#define SET_UART_FORMAT_SIZE_8		0x03
+#define SET_UART_FORMAT_STOP_1		0x00
+#define SET_UART_FORMAT_STOP_2		0x04
+#define SET_UART_FORMAT_PAR_NONE	0x00
+#define SET_UART_FORMAT_PAR_ODD		0x10
+#define SET_UART_FORMAT_PAR_EVEN	0x30
+#define SET_UART_FORMAT_PAR_MASK	0xD0
+#define SET_UART_FORMAT_PAR_SPACE	0x90
+
+#define GET_UART_STATUS_TYPE		0xc0
+#define GET_UART_STATUS			0x22
+#define GET_UART_STATUS_MSR		0x06
+
+#define SET_UART_STATUS			0x40
+#define SET_UART_STATUS_TYPE		0x23
+#define SET_UART_STATUS_MCR		0x0004
+#define SET_UART_STATUS_MCR_DTR		0x01
+#define SET_UART_STATUS_MCR_RTS		0x02
+#define SET_UART_STATUS_MCR_LOOP	0x10
+
+#define SET_WORKING_MODE		0x40
+#define SET_WORKING_MODE_TYPE		0x24
+#define SET_WORKING_MODE_U2C		0x00
+#define SET_WORKING_MODE_RS485		0x01
+#define SET_WORKING_MODE_PDMA		0x02
+#define SET_WORKING_MODE_SPP		0x03
+
+#define SET_FLOWCTL_CHAR		0x40
+#define SET_FLOWCTL_CHAR_TYPE		0x25
+
+#define GET_VERSION			0xc0
+#define GET_VERSION_TYPE		0x26
+
+#define SET_REGISTER			0x40
+#define SET_REGISTER_TYPE		0x27
+
+#define	GET_REGISTER			0xc0
+#define GET_REGISTER_TYPE		0x28
+
+#define SET_RAM				0x40
+#define SET_RAM_TYPE			0x31
+
+#define GET_RAM				0xc0
+#define GET_RAM_TYPE			0x32
+
+/* how come ??? */
+#define UART_STATE			0x08
+#define UART_STATE_TRANSIENT_MASK	0x75
+#define UART_DCD			0x01
+#define UART_DSR			0x02
+#define UART_BREAK_ERROR		0x04
+#define UART_RING			0x08
+#define UART_FRAME_ERROR		0x10
+#define UART_PARITY_ERROR		0x20
+#define UART_OVERRUN_ERROR		0x40
+#define UART_CTS			0x80
+
+struct spcp8x5_private {
+	unsigned		quirks;
+	spinlock_t		lock;
+	u8			line_control;
+};
+
+static int spcp8x5_probe(struct usb_serial *serial,
+						const struct usb_device_id *id)
+{
+	usb_set_serial_data(serial, (void *)id);
+
+	return 0;
+}
+
+static int spcp8x5_port_probe(struct usb_serial_port *port)
+{
+	const struct usb_device_id *id = usb_get_serial_data(port->serial);
+	struct spcp8x5_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	priv->quirks = id->driver_info;
+
+	usb_set_serial_port_data(port, priv);
+
+	port->port.drain_delay = 256;
+
+	return 0;
+}
+
+static int spcp8x5_port_remove(struct usb_serial_port *port)
+{
+	struct spcp8x5_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
+}
+
+static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	int retval;
+
+	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
+		return -EPERM;
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 SET_UART_STATUS_TYPE, SET_UART_STATUS,
+				 mcr, 0x04, NULL, 0, 100);
+	if (retval != 0) {
+		dev_err(&port->dev, "failed to set control lines: %d\n",
+								retval);
+	}
+	return retval;
+}
+
+static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	u8 *buf;
+	int ret;
+
+	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
+		return -EPERM;
+
+	buf = kzalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      GET_UART_STATUS, GET_UART_STATUS_TYPE,
+			      0, GET_UART_STATUS_MSR, buf, 1, 100);
+	if (ret < 0)
+		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+
+	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x\n", ret, *buf);
+	*status = *buf;
+	kfree(buf);
+
+	return ret;
+}
+
+static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
+								 u16 index)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	int ret;
+
+	if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
+		return;
+
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			      SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
+			      value, index, NULL, 0, 100);
+	dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
+	if (ret < 0)
+		dev_err(&port->dev, "failed to set work mode: %d\n", ret);
+}
+
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+	u8 msr;
+	int ret;
+
+	ret = spcp8x5_get_msr(port, &msr);
+	if (ret || msr & MSR_STATUS_LINE_DCD)
+		return 1;
+
+	return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control = MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS;
+	else
+		priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	spcp8x5_set_ctrl_line(port, control);
+}
+
+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+	tty->termios = tty_std_termios;
+	tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->termios.c_ispeed = 115200;
+	tty->termios.c_ospeed = 115200;
+}
+
+static void spcp8x5_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int cflag = tty->termios.c_cflag;
+	unsigned short uartdata;
+	unsigned char buf[2] = {0, 0};
+	int baud;
+	int i;
+	u8 control;
+
+	/* check that they really want us to change something */
+	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+		return;
+
+	/* set DTR/RTS active */
+	spin_lock_irqsave(&priv->lock, flags);
+	control = priv->line_control;
+	if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
+		priv->line_control |= MCR_DTR;
+		if (!(old_termios->c_cflag & CRTSCTS))
+			priv->line_control |= MCR_RTS;
+	}
+	if (control != priv->line_control) {
+		control = priv->line_control;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		spcp8x5_set_ctrl_line(port, control);
+	} else {
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	/* Set Baud Rate */
+	baud = tty_get_baud_rate(tty);
+	switch (baud) {
+	case 300:	buf[0] = 0x00;	break;
+	case 600:	buf[0] = 0x01;	break;
+	case 1200:	buf[0] = 0x02;	break;
+	case 2400:	buf[0] = 0x03;	break;
+	case 4800:	buf[0] = 0x04;	break;
+	case 9600:	buf[0] = 0x05;	break;
+	case 19200:	buf[0] = 0x07;	break;
+	case 38400:	buf[0] = 0x09;	break;
+	case 57600:	buf[0] = 0x0a;	break;
+	case 115200:	buf[0] = 0x0b;	break;
+	case 230400:	buf[0] = 0x0c;	break;
+	case 460800:	buf[0] = 0x0d;	break;
+	case 921600:	buf[0] = 0x0e;	break;
+/*	case 1200000:	buf[0] = 0x0f;	break; */
+/*	case 2400000:	buf[0] = 0x10;	break; */
+	case 3000000:	buf[0] = 0x11;	break;
+/*	case 6000000:	buf[0] = 0x12;	break; */
+	case 0:
+	case 1000000:
+			buf[0] = 0x0b;	break;
+	default:
+		dev_err(&port->dev, "unsupported baudrate, using 9600\n");
+	}
+
+	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
+	switch (cflag & CSIZE) {
+	case CS5:
+		buf[1] |= SET_UART_FORMAT_SIZE_5;
+		break;
+	case CS6:
+		buf[1] |= SET_UART_FORMAT_SIZE_6;
+		break;
+	case CS7:
+		buf[1] |= SET_UART_FORMAT_SIZE_7;
+		break;
+	default:
+	case CS8:
+		buf[1] |= SET_UART_FORMAT_SIZE_8;
+		break;
+	}
+
+	/* Set Stop bit2 : 0:1bit 1:2bit */
+	buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
+				     SET_UART_FORMAT_STOP_1;
+
+	/* Set Parity bit3-4 01:Odd 11:Even */
+	if (cflag & PARENB) {
+		buf[1] |= (cflag & PARODD) ?
+		SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
+	} else {
+		buf[1] |= SET_UART_FORMAT_PAR_NONE;
+	}
+	uartdata = buf[0] | buf[1]<<8;
+
+	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			    SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
+			    uartdata, 0, NULL, 0, 100);
+	if (i < 0)
+		dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
+			uartdata, i);
+	dev_dbg(&port->dev, "0x21:0x40:0:0  %d\n", i);
+
+	if (cflag & CRTSCTS) {
+		/* enable hardware flow control */
+		spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
+	}
+}
+
+static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	int ret;
+
+	usb_clear_halt(serial->dev, port->write_urb->pipe);
+	usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+	ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			      0x09, 0x00,
+			      0x01, 0x00, NULL, 0x00, 100);
+	if (ret)
+		return ret;
+
+	spcp8x5_set_ctrl_line(port, priv->line_control);
+
+	if (tty)
+		spcp8x5_set_termios(tty, port, NULL);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static int spcp8x5_tiocmset(struct tty_struct *tty,
+			    unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (set & TIOCM_RTS)
+		priv->line_control |= MCR_RTS;
+	if (set & TIOCM_DTR)
+		priv->line_control |= MCR_DTR;
+	if (clear & TIOCM_RTS)
+		priv->line_control &= ~MCR_RTS;
+	if (clear & TIOCM_DTR)
+		priv->line_control &= ~MCR_DTR;
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return spcp8x5_set_ctrl_line(port, control);
+}
+
+static int spcp8x5_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int mcr;
+	u8 status;
+	unsigned int result;
+
+	result = spcp8x5_get_msr(port, &status);
+	if (result)
+		return result;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	mcr = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	result = ((mcr & MCR_DTR)			? TIOCM_DTR : 0)
+		  | ((mcr & MCR_RTS)			? TIOCM_RTS : 0)
+		  | ((status & MSR_STATUS_LINE_CTS)	? TIOCM_CTS : 0)
+		  | ((status & MSR_STATUS_LINE_DSR)	? TIOCM_DSR : 0)
+		  | ((status & MSR_STATUS_LINE_RI)	? TIOCM_RI  : 0)
+		  | ((status & MSR_STATUS_LINE_DCD)	? TIOCM_CD  : 0);
+
+	return result;
+}
+
+static struct usb_serial_driver spcp8x5_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"SPCP8x5",
+	},
+	.id_table		= id_table,
+	.num_ports		= 1,
+	.open			= spcp8x5_open,
+	.dtr_rts		= spcp8x5_dtr_rts,
+	.carrier_raised		= spcp8x5_carrier_raised,
+	.set_termios		= spcp8x5_set_termios,
+	.init_termios		= spcp8x5_init_termios,
+	.tiocmget		= spcp8x5_tiocmget,
+	.tiocmset		= spcp8x5_tiocmset,
+	.probe			= spcp8x5_probe,
+	.port_probe		= spcp8x5_port_probe,
+	.port_remove		= spcp8x5_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&spcp8x5_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");