Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 48 insertions, 124 deletions

diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index fb1e7ad27..60524834d 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -169,7 +169,7 @@ static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge)
 	unsigned int error_addr_high, error_addr_low;
 	unsigned long long error_addr;
 	u32 error_attrib;
-	struct vme_bus_error *error = NULL;
+	int error_am;
 	struct tsi148_driver *bridge;
 
 	bridge = tsi148_bridge->driver_priv;
@@ -177,6 +177,7 @@ static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge)
 	error_addr_high = ioread32be(bridge->base + TSI148_LCSR_VEAU);
 	error_addr_low = ioread32be(bridge->base + TSI148_LCSR_VEAL);
 	error_attrib = ioread32be(bridge->base + TSI148_LCSR_VEAT);
+	error_am = (error_attrib & TSI148_LCSR_VEAT_AM_M) >> 8;
 
 	reg_join(error_addr_high, error_addr_low, &error_addr);
 
@@ -186,23 +187,12 @@ static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge)
 			"Occurred\n");
 	}
 
-	if (err_chk) {
-		error = kmalloc(sizeof(struct vme_bus_error), GFP_ATOMIC);
-		if (error) {
-			error->address = error_addr;
-			error->attributes = error_attrib;
-			list_add_tail(&error->list, &tsi148_bridge->vme_errors);
-		} else {
-			dev_err(tsi148_bridge->parent,
-				"Unable to alloc memory for VMEbus Error reporting\n");
-		}
-	}
-
-	if (!error) {
+	if (err_chk)
+		vme_bus_error_handler(tsi148_bridge, error_addr, error_am);
+	else
 		dev_err(tsi148_bridge->parent,
 			"VME Bus Error at address: 0x%llx, attributes: %08x\n",
 			error_addr, error_attrib);
-	}
 
 	/* Clear Status */
 	iowrite32be(TSI148_LCSR_VEAT_VESCL, bridge->base + TSI148_LCSR_VEAT);
@@ -324,8 +314,7 @@ static int tsi148_irq_init(struct vme_bridge *tsi148_bridge)
 
 	bridge = tsi148_bridge->driver_priv;
 
-	/* Initialise list for VME bus errors */
-	INIT_LIST_HEAD(&tsi148_bridge->vme_errors);
+	INIT_LIST_HEAD(&tsi148_bridge->vme_error_handlers);
 
 	mutex_init(&tsi148_bridge->irq_mtx);
 
@@ -483,73 +472,6 @@ static int tsi148_irq_generate(struct vme_bridge *tsi148_bridge, int level,
 }
 
 /*
- * Find the first error in this address range
- */
-static struct vme_bus_error *tsi148_find_error(struct vme_bridge *tsi148_bridge,
-	u32 aspace, unsigned long long address, size_t count)
-{
-	struct list_head *err_pos;
-	struct vme_bus_error *vme_err, *valid = NULL;
-	unsigned long long bound;
-
-	bound = address + count;
-
-	/*
-	 * XXX We are currently not looking at the address space when parsing
-	 *     for errors. This is because parsing the Address Modifier Codes
-	 *     is going to be quite resource intensive to do properly. We
-	 *     should be OK just looking at the addresses and this is certainly
-	 *     much better than what we had before.
-	 */
-	err_pos = NULL;
-	/* Iterate through errors */
-	list_for_each(err_pos, &tsi148_bridge->vme_errors) {
-		vme_err = list_entry(err_pos, struct vme_bus_error, list);
-		if ((vme_err->address >= address) &&
-			(vme_err->address < bound)) {
-
-			valid = vme_err;
-			break;
-		}
-	}
-
-	return valid;
-}
-
-/*
- * Clear errors in the provided address range.
- */
-static void tsi148_clear_errors(struct vme_bridge *tsi148_bridge,
-	u32 aspace, unsigned long long address, size_t count)
-{
-	struct list_head *err_pos, *temp;
-	struct vme_bus_error *vme_err;
-	unsigned long long bound;
-
-	bound = address + count;
-
-	/*
-	 * XXX We are currently not looking at the address space when parsing
-	 *     for errors. This is because parsing the Address Modifier Codes
-	 *     is going to be quite resource intensive to do properly. We
-	 *     should be OK just looking at the addresses and this is certainly
-	 *     much better than what we had before.
-	 */
-	err_pos = NULL;
-	/* Iterate through errors */
-	list_for_each_safe(err_pos, temp, &tsi148_bridge->vme_errors) {
-		vme_err = list_entry(err_pos, struct vme_bus_error, list);
-
-		if ((vme_err->address >= address) &&
-			(vme_err->address < bound)) {
-
-			list_del(err_pos);
-			kfree(vme_err);
-		}
-	}
-}
-
-/*
  * Initialize a slave window with the requested attributes.
  */
 static int tsi148_slave_set(struct vme_slave_resource *image, int enabled,
@@ -846,7 +768,7 @@ static int tsi148_alloc_resource(struct vme_master_resource *image,
 	image->bus_resource.flags = IORESOURCE_MEM;
 
 	retval = pci_bus_alloc_resource(pdev->bus,
-		&image->bus_resource, size, size, PCIBIOS_MIN_MEM,
+		&image->bus_resource, size, 0x10000, PCIBIOS_MIN_MEM,
 		0, NULL, NULL);
 	if (retval) {
 		dev_err(tsi148_bridge->parent, "Failed to allocate mem "
@@ -1264,7 +1186,7 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
 	int retval, enabled;
 	unsigned long long vme_base, size;
 	u32 aspace, cycle, dwidth;
-	struct vme_bus_error *vme_err = NULL;
+	struct vme_error_handler *handler = NULL;
 	struct vme_bridge *tsi148_bridge;
 	void __iomem *addr = image->kern_base + offset;
 	unsigned int done = 0;
@@ -1274,6 +1196,17 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
 
 	spin_lock(&image->lock);
 
+	if (err_chk) {
+		__tsi148_master_get(image, &enabled, &vme_base, &size, &aspace,
+				    &cycle, &dwidth);
+		handler = vme_register_error_handler(tsi148_bridge, aspace,
+						     vme_base + offset, count);
+		if (!handler) {
+			spin_unlock(&image->lock);
+			return -ENOMEM;
+		}
+	}
+
 	/* The following code handles VME address alignment. We cannot use
 	 * memcpy_xxx here because it may cut data transfers in to 8-bit
 	 * cycles when D16 or D32 cycles are required on the VME bus.
@@ -1317,24 +1250,16 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
 out:
 	retval = count;
 
-	if (!err_chk)
-		goto skip_chk;
-
-	__tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle,
-		&dwidth);
-
-	vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset,
-		count);
-	if (vme_err != NULL) {
-		dev_err(image->parent->parent, "First VME read error detected "
-			"an at address 0x%llx\n", vme_err->address);
-		retval = vme_err->address - (vme_base + offset);
-		/* Clear down save errors in this address range */
-		tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset,
-			count);
+	if (err_chk) {
+		if (handler->num_errors) {
+			dev_err(image->parent->parent,
+				"First VME read error detected an at address 0x%llx\n",
+				handler->first_error);
+			retval = handler->first_error - (vme_base + offset);
+		}
+		vme_unregister_error_handler(handler);
 	}
 
-skip_chk:
 	spin_unlock(&image->lock);
 
 	return retval;
@@ -1351,7 +1276,7 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
 	unsigned int done = 0;
 	unsigned int count32;
 
-	struct vme_bus_error *vme_err = NULL;
+	struct vme_error_handler *handler = NULL;
 	struct vme_bridge *tsi148_bridge;
 	struct tsi148_driver *bridge;
 
@@ -1361,6 +1286,17 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
 
 	spin_lock(&image->lock);
 
+	if (err_chk) {
+		__tsi148_master_get(image, &enabled, &vme_base, &size, &aspace,
+				    &cycle, &dwidth);
+		handler = vme_register_error_handler(tsi148_bridge, aspace,
+						     vme_base + offset, count);
+		if (!handler) {
+			spin_unlock(&image->lock);
+			return -ENOMEM;
+		}
+	}
+
 	/* Here we apply for the same strategy we do in master_read
 	 * function in order to assure the correct cycles.
 	 */
@@ -1410,30 +1346,18 @@ out:
 	 * We check for saved errors in the written address range/space.
 	 */
 
-	if (!err_chk)
-		goto skip_chk;
-
-	/*
-	 * Get window info first, to maximise the time that the buffers may
-	 * fluch on their own
-	 */
-	__tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle,
-		&dwidth);
-
-	ioread16(bridge->flush_image->kern_base + 0x7F000);
+	if (err_chk) {
+		ioread16(bridge->flush_image->kern_base + 0x7F000);
 
-	vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset,
-		count);
-	if (vme_err != NULL) {
-		dev_warn(tsi148_bridge->parent, "First VME write error detected"
-			" an at address 0x%llx\n", vme_err->address);
-		retval = vme_err->address - (vme_base + offset);
-		/* Clear down save errors in this address range */
-		tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset,
-			count);
+		if (handler->num_errors) {
+			dev_warn(tsi148_bridge->parent,
+				 "First VME write error detected an at address 0x%llx\n",
+				 handler->first_error);
+			retval = handler->first_error - (vme_base + offset);
+		}
+		vme_unregister_error_handler(handler);
 	}
 
-skip_chk:
 	spin_unlock(&image->lock);
 
 	return retval;