Linux-libre 4.2.1-gnupck-4.2.1-gnu

89 files changed, 899 insertions, 350 deletions

diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c
index ff6d8adc9..fb765524c 100644
--- a/drivers/acpi/acpi_pnp.c
+++ b/drivers/acpi/acpi_pnp.c
@@ -153,6 +153,7 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = {
 	{"AEI0250"},		/* PROLiNK 1456VH ISA PnP K56flex Fax Modem */
 	{"AEI1240"},		/* Actiontec ISA PNP 56K X2 Fax Modem */
 	{"AKY1021"},		/* Rockwell 56K ACF II Fax+Data+Voice Modem */
+	{"ALI5123"},		/* ALi Fast Infrared Controller */
 	{"AZT4001"},		/* AZT3005 PnP SOUND DEVICE */
 	{"BDP3336"},		/* Best Data Products Inc. Smart One 336F PnP Modem */
 	{"BRI0A49"},		/* Boca Complete Ofc Communicator 14.4 Data-FAX */
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index cfd7581cc..b09ad5544 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -826,6 +826,22 @@ void acpi_penalize_isa_irq(int irq, int active)
 }
 
 /*
+ * Penalize IRQ used by ACPI SCI. If ACPI SCI pin attributes conflict with
+ * PCI IRQ attributes, mark ACPI SCI as ISA_ALWAYS so it won't be use for
+ * PCI IRQs.
+ */
+void acpi_penalize_sci_irq(int irq, int trigger, int polarity)
+{
+	if (irq >= 0 && irq < ARRAY_SIZE(acpi_irq_penalty)) {
+		if (trigger != ACPI_MADT_TRIGGER_LEVEL ||
+		    polarity != ACPI_MADT_POLARITY_ACTIVE_LOW)
+			acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_ALWAYS;
+		else
+			acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+	}
+}
+
+/*
  * Over-ride default table to reserve additional IRQs for use by ISA
  * e.g. acpi_irq_isa=5
  * Useful for telling ACPI how not to interfere with your ISA sound card.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e1ba5ee9f..a074afd77 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -351,6 +351,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	/* JMicron 362B and 362C have an AHCI function with IDE class code */
 	{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
 	{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
+	/* May need to update quirk_jmicron_async_suspend() for additions */
 
 	/* ATI */
 	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
@@ -1451,18 +1452,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	else if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
 		ahci_pci_bar = AHCI_PCI_BAR_CAVIUM;
 
-	/*
-	 * The JMicron chip 361/363 contains one SATA controller and one
-	 * PATA controller,for powering on these both controllers, we must
-	 * follow the sequence one by one, otherwise one of them can not be
-	 * powered on successfully, so here we disable the async suspend
-	 * method for these chips.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
-		(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
-		pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
-		device_disable_async_suspend(&pdev->dev);
-
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 47e418b8c..4d1a5d2c4 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	/*
-	 * The JMicron chip 361/363 contains one SATA controller and one
-	 * PATA controller,for powering on these both controllers, we must
-	 * follow the sequence one by one, otherwise one of them can not be
-	 * powered on successfully, so here we disable the async suspend
-	 * method for these chips.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
-		(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
-		pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
-		device_disable_async_suspend(&pdev->dev);
-
 	return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
 }
 
diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c
index 5b9385239..0d752851a 100644
--- a/drivers/auxdisplay/ks0108.c
+++ b/drivers/auxdisplay/ks0108.c
@@ -139,6 +139,7 @@ static int __init ks0108_init(void)
 
 	ks0108_pardevice = parport_register_device(ks0108_parport, KS0108_NAME,
 		NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+	parport_put_port(ks0108_parport);
 	if (ks0108_pardevice == NULL) {
 		printk(KERN_ERR KS0108_NAME ": ERROR: "
 			"parport didn't register new device\n");
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index c8a53d1e0..875464690 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -297,10 +297,10 @@ void * devres_get(struct device *dev, void *new_res,
 	if (!dr) {
 		add_dr(dev, &new_dr->node);
 		dr = new_dr;
-		new_dr = NULL;
+		new_res = NULL;
 	}
 	spin_unlock_irqrestore(&dev->devres_lock, flags);
-	devres_free(new_dr);
+	devres_free(new_res);
 
 	return dr->data;
 }
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 063f0ab15..f80aaaf9f 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -375,9 +375,7 @@ int platform_device_add(struct platform_device *pdev)
 
 	while (--i >= 0) {
 		struct resource *r = &pdev->resource[i];
-		unsigned long type = resource_type(r);
-
-		if (type == IORESOURCE_MEM || type == IORESOURCE_IO)
+		if (r->parent)
 			release_resource(r);
 	}
 
@@ -408,9 +406,7 @@ void platform_device_del(struct platform_device *pdev)
 
 		for (i = 0; i < pdev->num_resources; i++) {
 			struct resource *r = &pdev->resource[i];
-			unsigned long type = resource_type(r);
-
-			if (type == IORESOURCE_MEM || type == IORESOURCE_IO)
+			if (r->parent)
 				release_resource(r);
 		}
 	}
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index acef9f9f7..652b5a367 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -38,7 +38,7 @@ struct pm_clock_entry {
  * @dev: The device for the given clock
  * @ce: PM clock entry corresponding to the clock.
  */
-static inline int __pm_clk_enable(struct device *dev, struct pm_clock_entry *ce)
+static inline void __pm_clk_enable(struct device *dev, struct pm_clock_entry *ce)
 {
 	int ret;
 
@@ -50,8 +50,6 @@ static inline int __pm_clk_enable(struct device *dev, struct pm_clock_entry *ce)
 			dev_err(dev, "%s: failed to enable clk %p, error %d\n",
 				__func__, ce->clk, ret);
 	}
-
-	return ret;
 }
 
 /**
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index f7a4c9d7f..23103ad14 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -560,6 +560,24 @@ static inline int is_loop_device(struct file *file)
 	return i && S_ISBLK(i->i_mode) && MAJOR(i->i_rdev) == LOOP_MAJOR;
 }
 
+/*
+ * for AUFS
+ * no get/put for file.
+ */
+struct file *loop_backing_file(struct super_block *sb)
+{
+	struct file *ret;
+	struct loop_device *l;
+
+	ret = NULL;
+	if (MAJOR(sb->s_dev) == LOOP_MAJOR) {
+		l = sb->s_bdev->bd_disk->private_data;
+		ret = l->lo_backing_file;
+	}
+	return ret;
+}
+EXPORT_SYMBOL(loop_backing_file);
+
 /* loop sysfs attributes */
 
 static ssize_t loop_attr_show(struct device *dev, char *page,
diff --git a/drivers/clk/pistachio/clk-pistachio.c b/drivers/clk/pistachio/clk-pistachio.c
index 8c0fe8828..c4ceb5eaf 100644
--- a/drivers/clk/pistachio/clk-pistachio.c
+++ b/drivers/clk/pistachio/clk-pistachio.c
@@ -159,9 +159,15 @@ PNAME(mux_debug) = { "mips_pll_mux", "rpu_v_pll_mux",
 		     "wifi_pll_mux", "bt_pll_mux" };
 static u32 mux_debug_idx[] = { 0x0, 0x1, 0x2, 0x4, 0x8, 0x10 };
 
-static unsigned int pistachio_critical_clks[] __initdata = {
-	CLK_MIPS,
-	CLK_PERIPH_SYS,
+static unsigned int pistachio_critical_clks_core[] __initdata = {
+	CLK_MIPS
+};
+
+static unsigned int pistachio_critical_clks_sys[] __initdata = {
+	PERIPH_CLK_SYS,
+	PERIPH_CLK_SYS_BUS,
+	PERIPH_CLK_DDR,
+	PERIPH_CLK_ROM,
 };
 
 static void __init pistachio_clk_init(struct device_node *np)
@@ -193,8 +199,8 @@ static void __init pistachio_clk_init(struct device_node *np)
 
 	pistachio_clk_register_provider(p);
 
-	pistachio_clk_force_enable(p, pistachio_critical_clks,
-				   ARRAY_SIZE(pistachio_critical_clks));
+	pistachio_clk_force_enable(p, pistachio_critical_clks_core,
+				   ARRAY_SIZE(pistachio_critical_clks_core));
 }
 CLK_OF_DECLARE(pistachio_clk, "img,pistachio-clk", pistachio_clk_init);
 
@@ -261,6 +267,9 @@ static void __init pistachio_clk_periph_init(struct device_node *np)
 				    ARRAY_SIZE(pistachio_periph_gates));
 
 	pistachio_clk_register_provider(p);
+
+	pistachio_clk_force_enable(p, pistachio_critical_clks_sys,
+				   ARRAY_SIZE(pistachio_critical_clks_sys));
 }
 CLK_OF_DECLARE(pistachio_clk_periph, "img,pistachio-clk-periph",
 	       pistachio_clk_periph_init);
diff --git a/drivers/clk/pistachio/clk-pll.c b/drivers/clk/pistachio/clk-pll.c
index e17dada0d..c9b459821 100644
--- a/drivers/clk/pistachio/clk-pll.c
+++ b/drivers/clk/pistachio/clk-pll.c
@@ -65,6 +65,12 @@
 #define MIN_OUTPUT_FRAC			12000000UL
 #define MAX_OUTPUT_FRAC			1600000000UL
 
+/* Fractional PLL operating modes */
+enum pll_mode {
+	PLL_MODE_FRAC,
+	PLL_MODE_INT,
+};
+
 struct pistachio_clk_pll {
 	struct clk_hw hw;
 	void __iomem *base;
@@ -88,12 +94,10 @@ static inline void pll_lock(struct pistachio_clk_pll *pll)
 		cpu_relax();
 }
 
-static inline u32 do_div_round_closest(u64 dividend, u32 divisor)
+static inline u64 do_div_round_closest(u64 dividend, u64 divisor)
 {
 	dividend += divisor / 2;
-	do_div(dividend, divisor);
-
-	return dividend;
+	return div64_u64(dividend, divisor);
 }
 
 static inline struct pistachio_clk_pll *to_pistachio_pll(struct clk_hw *hw)
@@ -101,6 +105,29 @@ static inline struct pistachio_clk_pll *to_pistachio_pll(struct clk_hw *hw)
 	return container_of(hw, struct pistachio_clk_pll, hw);
 }
 
+static inline enum pll_mode pll_frac_get_mode(struct clk_hw *hw)
+{
+	struct pistachio_clk_pll *pll = to_pistachio_pll(hw);
+	u32 val;
+
+	val = pll_readl(pll, PLL_CTRL3) & PLL_FRAC_CTRL3_DSMPD;
+	return val ? PLL_MODE_INT : PLL_MODE_FRAC;
+}
+
+static inline void pll_frac_set_mode(struct clk_hw *hw, enum pll_mode mode)
+{
+	struct pistachio_clk_pll *pll = to_pistachio_pll(hw);
+	u32 val;
+
+	val = pll_readl(pll, PLL_CTRL3);
+	if (mode == PLL_MODE_INT)
+		val |= PLL_FRAC_CTRL3_DSMPD | PLL_FRAC_CTRL3_DACPD;
+	else
+		val &= ~(PLL_FRAC_CTRL3_DSMPD | PLL_FRAC_CTRL3_DACPD);
+
+	pll_writel(pll, val, PLL_CTRL3);
+}
+
 static struct pistachio_pll_rate_table *
 pll_get_params(struct pistachio_clk_pll *pll, unsigned long fref,
 	       unsigned long fout)
@@ -136,8 +163,7 @@ static int pll_gf40lp_frac_enable(struct clk_hw *hw)
 	u32 val;
 
 	val = pll_readl(pll, PLL_CTRL3);
-	val &= ~(PLL_FRAC_CTRL3_PD | PLL_FRAC_CTRL3_DACPD |
-		 PLL_FRAC_CTRL3_DSMPD | PLL_FRAC_CTRL3_FOUTPOSTDIVPD |
+	val &= ~(PLL_FRAC_CTRL3_PD | PLL_FRAC_CTRL3_FOUTPOSTDIVPD |
 		 PLL_FRAC_CTRL3_FOUT4PHASEPD | PLL_FRAC_CTRL3_FOUTVCOPD);
 	pll_writel(pll, val, PLL_CTRL3);
 
@@ -173,7 +199,7 @@ static int pll_gf40lp_frac_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct pistachio_clk_pll *pll = to_pistachio_pll(hw);
 	struct pistachio_pll_rate_table *params;
 	int enabled = pll_gf40lp_frac_is_enabled(hw);
-	u32 val, vco, old_postdiv1, old_postdiv2;
+	u64 val, vco, old_postdiv1, old_postdiv2;
 	const char *name = __clk_get_name(hw->clk);
 
 	if (rate < MIN_OUTPUT_FRAC || rate > MAX_OUTPUT_FRAC)
@@ -183,17 +209,21 @@ static int pll_gf40lp_frac_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!params || !params->refdiv)
 		return -EINVAL;
 
-	vco = params->fref * params->fbdiv / params->refdiv;
+	/* calculate vco */
+	vco = params->fref;
+	vco *= (params->fbdiv << 24) + params->frac;
+	vco = div64_u64(vco, params->refdiv << 24);
+
 	if (vco < MIN_VCO_FRAC_FRAC || vco > MAX_VCO_FRAC_FRAC)
-		pr_warn("%s: VCO %u is out of range %lu..%lu\n", name, vco,
+		pr_warn("%s: VCO %llu is out of range %lu..%lu\n", name, vco,
 			MIN_VCO_FRAC_FRAC, MAX_VCO_FRAC_FRAC);
 
-	val = params->fref / params->refdiv;
+	val = div64_u64(params->fref, params->refdiv);
 	if (val < MIN_PFD)
-		pr_warn("%s: PFD %u is too low (min %lu)\n",
+		pr_warn("%s: PFD %llu is too low (min %lu)\n",
 			name, val, MIN_PFD);
 	if (val > vco / 16)
-		pr_warn("%s: PFD %u is too high (max %u)\n",
+		pr_warn("%s: PFD %llu is too high (max %llu)\n",
 			name, val, vco / 16);
 
 	val = pll_readl(pll, PLL_CTRL1);
@@ -227,6 +257,12 @@ static int pll_gf40lp_frac_set_rate(struct clk_hw *hw, unsigned long rate,
 		(params->postdiv2 << PLL_FRAC_CTRL2_POSTDIV2_SHIFT);
 	pll_writel(pll, val, PLL_CTRL2);
 
+	/* set operating mode */
+	if (params->frac)
+		pll_frac_set_mode(hw, PLL_MODE_FRAC);
+	else
+		pll_frac_set_mode(hw, PLL_MODE_INT);
+
 	if (enabled)
 		pll_lock(pll);
 
@@ -237,8 +273,7 @@ static unsigned long pll_gf40lp_frac_recalc_rate(struct clk_hw *hw,
 						 unsigned long parent_rate)
 {
 	struct pistachio_clk_pll *pll = to_pistachio_pll(hw);
-	u32 val, prediv, fbdiv, frac, postdiv1, postdiv2;
-	u64 rate = parent_rate;
+	u64 val, prediv, fbdiv, frac, postdiv1, postdiv2, rate;
 
 	val = pll_readl(pll, PLL_CTRL1);
 	prediv = (val >> PLL_CTRL1_REFDIV_SHIFT) & PLL_CTRL1_REFDIV_MASK;
@@ -251,7 +286,13 @@ static unsigned long pll_gf40lp_frac_recalc_rate(struct clk_hw *hw,
 		PLL_FRAC_CTRL2_POSTDIV2_MASK;
 	frac = (val >> PLL_FRAC_CTRL2_FRAC_SHIFT) & PLL_FRAC_CTRL2_FRAC_MASK;
 
-	rate *= (fbdiv << 24) + frac;
+	/* get operating mode (int/frac) and calculate rate accordingly */
+	rate = parent_rate;
+	if (pll_frac_get_mode(hw) == PLL_MODE_FRAC)
+		rate *= (fbdiv << 24) + frac;
+	else
+		rate *= (fbdiv << 24);
+
 	rate = do_div_round_closest(rate, (prediv * postdiv1 * postdiv2) << 24);
 
 	return rate;
@@ -279,7 +320,7 @@ static int pll_gf40lp_laint_enable(struct clk_hw *hw)
 	u32 val;
 
 	val = pll_readl(pll, PLL_CTRL1);
-	val &= ~(PLL_INT_CTRL1_PD | PLL_INT_CTRL1_DSMPD |
+	val &= ~(PLL_INT_CTRL1_PD |
 		 PLL_INT_CTRL1_FOUTPOSTDIVPD | PLL_INT_CTRL1_FOUTVCOPD);
 	pll_writel(pll, val, PLL_CTRL1);
 
@@ -325,12 +366,12 @@ static int pll_gf40lp_laint_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!params || !params->refdiv)
 		return -EINVAL;
 
-	vco = params->fref * params->fbdiv / params->refdiv;
+	vco = div_u64(params->fref * params->fbdiv, params->refdiv);
 	if (vco < MIN_VCO_LA || vco > MAX_VCO_LA)
 		pr_warn("%s: VCO %u is out of range %lu..%lu\n", name, vco,
 			MIN_VCO_LA, MAX_VCO_LA);
 
-	val = params->fref / params->refdiv;
+	val = div_u64(params->fref, params->refdiv);
 	if (val < MIN_PFD)
 		pr_warn("%s: PFD %u is too low (min %lu)\n",
 			name, val, MIN_PFD);
diff --git a/drivers/clk/pistachio/clk.h b/drivers/clk/pistachio/clk.h
index 52fabbc24..8d45178db 100644
--- a/drivers/clk/pistachio/clk.h
+++ b/drivers/clk/pistachio/clk.h
@@ -95,13 +95,13 @@ struct pistachio_fixed_factor {
 	}
 
 struct pistachio_pll_rate_table {
-	unsigned long fref;
-	unsigned long fout;
-	unsigned int refdiv;
-	unsigned int fbdiv;
-	unsigned int postdiv1;
-	unsigned int postdiv2;
-	unsigned int frac;
+	unsigned long long fref;
+	unsigned long long fout;
+	unsigned long long refdiv;
+	unsigned long long fbdiv;
+	unsigned long long postdiv1;
+	unsigned long long postdiv2;
+	unsigned long long frac;
 };
 
 enum pistachio_pll_type {
diff --git a/drivers/clk/pxa/clk-pxa25x.c b/drivers/clk/pxa/clk-pxa25x.c
index 6cd88d963..542e45ef5 100644
--- a/drivers/clk/pxa/clk-pxa25x.c
+++ b/drivers/clk/pxa/clk-pxa25x.c
@@ -79,7 +79,7 @@ unsigned int pxa25x_get_clk_frequency_khz(int info)
 			clks[3] / 1000000, (clks[3] % 1000000) / 10000);
 	}
 
-	return (unsigned int)clks[0];
+	return (unsigned int)clks[0] / KHz;
 }
 
 static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw,
diff --git a/drivers/clk/pxa/clk-pxa27x.c b/drivers/clk/pxa/clk-pxa27x.c
index 9a31b77ee..5b82d30ba 100644
--- a/drivers/clk/pxa/clk-pxa27x.c
+++ b/drivers/clk/pxa/clk-pxa27x.c
@@ -80,7 +80,7 @@ unsigned int pxa27x_get_clk_frequency_khz(int info)
 		pr_info("System bus clock: %ld.%02ldMHz\n",
 			clks[4] / 1000000, (clks[4] % 1000000) / 10000);
 	}
-	return (unsigned int)clks[0];
+	return (unsigned int)clks[0] / KHz;
 }
 
 bool pxa27x_is_ppll_disabled(void)
diff --git a/drivers/clk/pxa/clk-pxa3xx.c b/drivers/clk/pxa/clk-pxa3xx.c
index ac03ba49e..4af4eed5f 100644
--- a/drivers/clk/pxa/clk-pxa3xx.c
+++ b/drivers/clk/pxa/clk-pxa3xx.c
@@ -78,7 +78,7 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info)
 		pr_info("System bus clock: %ld.%02ldMHz\n",
 			clks[4] / 1000000, (clks[4] % 1000000) / 10000);
 	}
-	return (unsigned int)clks[0];
+	return (unsigned int)clks[0] / KHz;
 }
 
 static unsigned long clk_pxa3xx_ac97_get_rate(struct clk_hw *hw,
diff --git a/drivers/clk/qcom/gcc-apq8084.c b/drivers/clk/qcom/gcc-apq8084.c
index 54a756b90..457c54058 100644
--- a/drivers/clk/qcom/gcc-apq8084.c
+++ b/drivers/clk/qcom/gcc-apq8084.c
@@ -2105,6 +2105,7 @@ static struct clk_branch gcc_ce1_clk = {
 				"ce1_clk_src",
 			},
 			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
index c66f7bc2a..5d75bffab 100644
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -2278,7 +2278,7 @@ static struct clk_branch gcc_prng_ahb_clk = {
 	.halt_check = BRANCH_HALT_VOTED,
 	.clkr = {
 		.enable_reg = 0x45004,
-		.enable_mask = BIT(0),
+		.enable_mask = BIT(8),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_prng_ahb_clk",
 			.parent_names = (const char *[]){
diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
index c39d09874..f06a082e3 100644
--- a/drivers/clk/qcom/gcc-msm8974.c
+++ b/drivers/clk/qcom/gcc-msm8974.c
@@ -1783,6 +1783,7 @@ static struct clk_branch gcc_ce1_clk = {
 				"ce1_clk_src",
 			},
 			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 4f817ed9e..0211162ee 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -578,7 +578,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	COMPOSITE(0, "mac_pll_src", mux_pll_src_npll_cpll_gpll_p, 0,
 			RK3288_CLKSEL_CON(21), 0, 2, MFLAGS, 8, 5, DFLAGS,
 			RK3288_CLKGATE_CON(2), 5, GFLAGS),
-	MUX(SCLK_MAC, "mac_clk", mux_mac_p, 0,
+	MUX(SCLK_MAC, "mac_clk", mux_mac_p, CLK_SET_RATE_PARENT,
 			RK3288_CLKSEL_CON(21), 4, 1, MFLAGS),
 	GATE(SCLK_MACREF_OUT, "sclk_macref_out", "mac_clk", 0,
 			RK3288_CLKGATE_CON(5), 3, GFLAGS),
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index cae2c0484..d1af2fc53 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -86,6 +86,7 @@
 #define DIV_PERIL4		0xc560
 #define DIV_PERIL5		0xc564
 #define E4X12_DIV_CAM1		0xc568
+#define E4X12_GATE_BUS_FSYS1	0xc744
 #define GATE_SCLK_CAM		0xc820
 #define GATE_IP_CAM		0xc920
 #define GATE_IP_TV		0xc924
@@ -1097,6 +1098,7 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
 		0),
 	GATE(CLK_PPMUIMAGE, "ppmuimage", "aclk200", E4X12_GATE_IP_IMAGE, 9, 0,
 		0),
+	GATE(CLK_TSADC, "tsadc", "aclk133", E4X12_GATE_BUS_FSYS1, 16, 0, 0),
 	GATE(CLK_MIPI_HSI, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
 	GATE(CLK_CHIPID, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0),
 	GATE(CLK_SYSREG, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1,
diff --git a/drivers/clk/samsung/clk-s5pv210.c b/drivers/clk/samsung/clk-s5pv210.c
index cf7e8fa7b..793cb1d2f 100644
--- a/drivers/clk/samsung/clk-s5pv210.c
+++ b/drivers/clk/samsung/clk-s5pv210.c
@@ -828,6 +828,8 @@ static void __init __s5pv210_clk_init(struct device_node *np,
 
 	s5pv210_clk_sleep_init();
 
+	samsung_clk_of_add_provider(np, ctx);
+
 	pr_info("%s clocks: mout_apll = %ld, mout_mpll = %ld\n"
 		"\tmout_epll = %ld, mout_vpll = %ld\n",
 		is_s5p6442 ? "S5P6442" : "S5PV210",
diff --git a/drivers/clk/versatile/clk-sp810.c b/drivers/clk/versatile/clk-sp810.c
index a96dd8e53..b674ffc4f 100644
--- a/drivers/clk/versatile/clk-sp810.c
+++ b/drivers/clk/versatile/clk-sp810.c
@@ -128,8 +128,8 @@ static struct clk *clk_sp810_timerclken_of_get(struct of_phandle_args *clkspec,
 {
 	struct clk_sp810 *sp810 = data;
 
-	if (WARN_ON(clkspec->args_count != 1 || clkspec->args[0] >
-			ARRAY_SIZE(sp810->timerclken)))
+	if (WARN_ON(clkspec->args_count != 1 ||
+		    clkspec->args[0] >=	ARRAY_SIZE(sp810->timerclken)))
 		return NULL;
 
 	return sp810->timerclken[clkspec->args[0]].clk;
diff --git a/drivers/crypto/vmx/aes_ctr.c b/drivers/crypto/vmx/aes_ctr.c
index 7adae42a7..ed3838781 100644
--- a/drivers/crypto/vmx/aes_ctr.c
+++ b/drivers/crypto/vmx/aes_ctr.c
@@ -113,6 +113,7 @@ static int p8_aes_ctr_crypt(struct blkcipher_desc *desc,
 			    struct scatterlist *src, unsigned int nbytes)
 {
 	int ret;
+	u64 inc;
 	struct blkcipher_walk walk;
 	struct p8_aes_ctr_ctx *ctx =
 		crypto_tfm_ctx(crypto_blkcipher_tfm(desc->tfm));
@@ -140,7 +141,12 @@ static int p8_aes_ctr_crypt(struct blkcipher_desc *desc,
 						    walk.iv);
 			pagefault_enable();
 
-			crypto_inc(walk.iv, AES_BLOCK_SIZE);
+			/* We need to update IV mostly for last bytes/round */
+			inc = (nbytes & AES_BLOCK_MASK) / AES_BLOCK_SIZE;
+			if (inc > 0)
+				while (inc--)
+					crypto_inc(walk.iv, AES_BLOCK_SIZE);
+
 			nbytes &= AES_BLOCK_SIZE - 1;
 			ret = blkcipher_walk_done(desc, &walk, nbytes);
 		}
diff --git a/drivers/crypto/vmx/aesp8-ppc.pl b/drivers/crypto/vmx/aesp8-ppc.pl
index 6c5c20c61..228053921 100644
--- a/drivers/crypto/vmx/aesp8-ppc.pl
+++ b/drivers/crypto/vmx/aesp8-ppc.pl
@@ -1437,28 +1437,28 @@ Load_ctr32_enc_key:
 	?vperm		v31,v31,$out0,$keyperm
 	lvx		v25,$x10,$key_		# pre-load round[2]
 
-	vadduwm		$two,$one,$one
+	vadduqm		$two,$one,$one
 	subi		$inp,$inp,15		# undo "caller"
 	$SHL		$len,$len,4
 
-	vadduwm		$out1,$ivec,$one	# counter values ...
-	vadduwm		$out2,$ivec,$two
+	vadduqm		$out1,$ivec,$one	# counter values ...
+	vadduqm		$out2,$ivec,$two
 	vxor		$out0,$ivec,$rndkey0	# ... xored with rndkey[0]
 	 le?li		$idx,8
-	vadduwm		$out3,$out1,$two
+	vadduqm		$out3,$out1,$two
 	vxor		$out1,$out1,$rndkey0
 	 le?lvsl	$inpperm,0,$idx
-	vadduwm		$out4,$out2,$two
+	vadduqm		$out4,$out2,$two
 	vxor		$out2,$out2,$rndkey0
 	 le?vspltisb	$tmp,0x0f
-	vadduwm		$out5,$out3,$two
+	vadduqm		$out5,$out3,$two
 	vxor		$out3,$out3,$rndkey0
 	 le?vxor	$inpperm,$inpperm,$tmp	# transform for lvx_u/stvx_u
-	vadduwm		$out6,$out4,$two
+	vadduqm		$out6,$out4,$two
 	vxor		$out4,$out4,$rndkey0
-	vadduwm		$out7,$out5,$two
+	vadduqm		$out7,$out5,$two
 	vxor		$out5,$out5,$rndkey0
-	vadduwm		$ivec,$out6,$two	# next counter value
+	vadduqm		$ivec,$out6,$two	# next counter value
 	vxor		$out6,$out6,$rndkey0
 	vxor		$out7,$out7,$rndkey0
 
@@ -1594,27 +1594,27 @@ Loop_ctr32_enc8x_middle:
 
 	vcipherlast	$in0,$out0,$in0
 	vcipherlast	$in1,$out1,$in1
-	 vadduwm	$out1,$ivec,$one	# counter values ...
+	 vadduqm	$out1,$ivec,$one	# counter values ...
 	vcipherlast	$in2,$out2,$in2
-	 vadduwm	$out2,$ivec,$two
+	 vadduqm	$out2,$ivec,$two
 	 vxor		$out0,$ivec,$rndkey0	# ... xored with rndkey[0]
 	vcipherlast	$in3,$out3,$in3
-	 vadduwm	$out3,$out1,$two
+	 vadduqm	$out3,$out1,$two
 	 vxor		$out1,$out1,$rndkey0
 	vcipherlast	$in4,$out4,$in4
-	 vadduwm	$out4,$out2,$two
+	 vadduqm	$out4,$out2,$two
 	 vxor		$out2,$out2,$rndkey0
 	vcipherlast	$in5,$out5,$in5
-	 vadduwm	$out5,$out3,$two
+	 vadduqm	$out5,$out3,$two
 	 vxor		$out3,$out3,$rndkey0
 	vcipherlast	$in6,$out6,$in6
-	 vadduwm	$out6,$out4,$two
+	 vadduqm	$out6,$out4,$two
 	 vxor		$out4,$out4,$rndkey0
 	vcipherlast	$in7,$out7,$in7
-	 vadduwm	$out7,$out5,$two
+	 vadduqm	$out7,$out5,$two
 	 vxor		$out5,$out5,$rndkey0
 	le?vperm	$in0,$in0,$in0,$inpperm
-	 vadduwm	$ivec,$out6,$two	# next counter value
+	 vadduqm	$ivec,$out6,$two	# next counter value
 	 vxor		$out6,$out6,$rndkey0
 	le?vperm	$in1,$in1,$in1,$inpperm
 	 vxor		$out7,$out7,$rndkey0
diff --git a/drivers/crypto/vmx/ghashp8-ppc.pl b/drivers/crypto/vmx/ghashp8-ppc.pl
index 0a6f89983..d8429cb71 100644
--- a/drivers/crypto/vmx/ghashp8-ppc.pl
+++ b/drivers/crypto/vmx/ghashp8-ppc.pl
@@ -61,6 +61,12 @@ $code=<<___;
 	mtspr		256,r0
 	li		r10,0x30
 	lvx_u		$H,0,r4			# load H
+	le?xor		r7,r7,r7
+	le?addi		r7,r7,0x8		# need a vperm start with 08
+	le?lvsr		5,0,r7
+	le?vspltisb	6,0x0f
+	le?vxor		5,5,6			# set a b-endian mask
+	le?vperm	$H,$H,$H,5
 
 	vspltisb	$xC2,-16		# 0xf0
 	vspltisb	$t0,1			# one
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
index 27df17a0e..89c3dd62b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
@@ -75,6 +75,11 @@ void amdgpu_connector_hotplug(struct drm_connector *connector)
 			if (!amdgpu_display_hpd_sense(adev, amdgpu_connector->hpd.hpd)) {
 				drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
 			} else if (amdgpu_atombios_dp_needs_link_train(amdgpu_connector)) {
+				/* Don't try to start link training before we
+				 * have the dpcd */
+				if (!amdgpu_atombios_dp_get_dpcd(amdgpu_connector))
+					return;
+
 				/* set it to OFF so that drm_helper_connector_dpms()
 				 * won't return immediately since the current state
 				 * is ON at this point.
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ih.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ih.c
index db5422e65..a8207e5a8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ih.c
@@ -97,18 +97,12 @@ int amdgpu_ih_ring_init(struct amdgpu_device *adev, unsigned ring_size,
 			/* add 8 bytes for the rptr/wptr shadows and
 			 * add them to the end of the ring allocation.
 			 */
-			adev->irq.ih.ring = kzalloc(adev->irq.ih.ring_size + 8, GFP_KERNEL);
+			adev->irq.ih.ring = pci_alloc_consistent(adev->pdev,
+								 adev->irq.ih.ring_size + 8,
+								 &adev->irq.ih.rb_dma_addr);
 			if (adev->irq.ih.ring == NULL)
 				return -ENOMEM;
-			adev->irq.ih.rb_dma_addr = pci_map_single(adev->pdev,
-								  (void *)adev->irq.ih.ring,
-								  adev->irq.ih.ring_size,
-								  PCI_DMA_BIDIRECTIONAL);
-			if (pci_dma_mapping_error(adev->pdev, adev->irq.ih.rb_dma_addr)) {
-				dev_err(&adev->pdev->dev, "Failed to DMA MAP the IH RB page\n");
-				kfree((void *)adev->irq.ih.ring);
-				return -ENOMEM;
-			}
+			memset((void *)adev->irq.ih.ring, 0, adev->irq.ih.ring_size + 8);
 			adev->irq.ih.wptr_offs = (adev->irq.ih.ring_size / 4) + 0;
 			adev->irq.ih.rptr_offs = (adev->irq.ih.ring_size / 4) + 1;
 		}
@@ -148,9 +142,9 @@ void amdgpu_ih_ring_fini(struct amdgpu_device *adev)
 			/* add 8 bytes for the rptr/wptr shadows and
 			 * add them to the end of the ring allocation.
 			 */
-			pci_unmap_single(adev->pdev, adev->irq.ih.rb_dma_addr,
-					 adev->irq.ih.ring_size + 8, PCI_DMA_BIDIRECTIONAL);
-			kfree((void *)adev->irq.ih.ring);
+			pci_free_consistent(adev->pdev, adev->irq.ih.ring_size + 8,
+					    (void *)adev->irq.ih.ring,
+					    adev->irq.ih.rb_dma_addr);
 			adev->irq.ih.ring = NULL;
 		}
 	} else {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
index 8d01fa3a8..6670ab7fa 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
@@ -369,7 +369,8 @@ static int amdgpu_uvd_cs_msg_decode(uint32_t *msg, unsigned buf_sizes[])
 	unsigned height_in_mb = ALIGN(height / 16, 2);
 	unsigned fs_in_mb = width_in_mb * height_in_mb;
 
-	unsigned image_size, tmp, min_dpb_size, num_dpb_buffer, min_ctx_size;
+	unsigned image_size, tmp, min_dpb_size, num_dpb_buffer;
+	unsigned min_ctx_size = 0;
 
 	image_size = width * height;
 	image_size += image_size / 2;
diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
index 9ba0a7d5b..92b6acadf 100644
--- a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
+++ b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
@@ -139,7 +139,8 @@ amdgpu_atombios_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *m
 
 	tx_buf[0] = msg->address & 0xff;
 	tx_buf[1] = msg->address >> 8;
-	tx_buf[2] = msg->request << 4;
+	tx_buf[2] = (msg->request << 4) |
+		((msg->address >> 16) & 0xf);
 	tx_buf[3] = msg->size ? (msg->size - 1) : 0;
 
 	switch (msg->request & ~DP_AUX_I2C_MOT) {
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
index e70a26f58..e774a437d 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c
@@ -1331,7 +1331,7 @@ static void dce_v10_0_program_watermarks(struct amdgpu_device *adev,
 	tmp = REG_SET_FIELD(wm_mask, DPG_WATERMARK_MASK_CONTROL, URGENCY_WATERMARK_MASK, 2);
 	WREG32(mmDPG_WATERMARK_MASK_CONTROL + amdgpu_crtc->crtc_offset, tmp);
 	tmp = RREG32(mmDPG_PIPE_URGENCY_CONTROL + amdgpu_crtc->crtc_offset);
-	tmp = REG_SET_FIELD(tmp, DPG_PIPE_URGENCY_CONTROL, URGENCY_LOW_WATERMARK, latency_watermark_a);
+	tmp = REG_SET_FIELD(tmp, DPG_PIPE_URGENCY_CONTROL, URGENCY_LOW_WATERMARK, latency_watermark_b);
 	tmp = REG_SET_FIELD(tmp, DPG_PIPE_URGENCY_CONTROL, URGENCY_HIGH_WATERMARK, line_time);
 	WREG32(mmDPG_PIPE_URGENCY_CONTROL + amdgpu_crtc->crtc_offset, tmp);
 	/* restore original selection */
diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
index dcb402ee0..c4a21a7af 100644
--- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c
@@ -1329,7 +1329,7 @@ static void dce_v11_0_program_watermarks(struct amdgpu_device *adev,
 	tmp = REG_SET_FIELD(wm_mask, DPG_WATERMARK_MASK_CONTROL, URGENCY_WATERMARK_MASK, 2);
 	WREG32(mmDPG_WATERMARK_MASK_CONTROL + amdgpu_crtc->crtc_offset, tmp);
 	tmp = RREG32(mmDPG_PIPE_URGENCY_CONTROL + amdgpu_crtc->crtc_offset);
-	tmp = REG_SET_FIELD(tmp, DPG_PIPE_URGENCY_CONTROL, URGENCY_LOW_WATERMARK, latency_watermark_a);
+	tmp = REG_SET_FIELD(tmp, DPG_PIPE_URGENCY_CONTROL, URGENCY_LOW_WATERMARK, latency_watermark_b);
 	tmp = REG_SET_FIELD(tmp, DPG_PIPE_URGENCY_CONTROL, URGENCY_HIGH_WATERMARK, line_time);
 	WREG32(mmDPG_PIPE_URGENCY_CONTROL + amdgpu_crtc->crtc_offset, tmp);
 	/* restore original selection */
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 884b4f9b8..603146ec9 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -683,15 +683,18 @@ static int i915_drm_suspend_late(struct drm_device *drm_dev, bool hibernation)
 
 	pci_disable_device(drm_dev->pdev);
 	/*
-	 * During hibernation on some GEN4 platforms the BIOS may try to access
+	 * During hibernation on some platforms the BIOS may try to access
 	 * the device even though it's already in D3 and hang the machine. So
 	 * leave the device in D0 on those platforms and hope the BIOS will
-	 * power down the device properly. Platforms where this was seen:
-	 * Lenovo Thinkpad X301, X61s
+	 * power down the device properly. The issue was seen on multiple old
+	 * GENs with different BIOS vendors, so having an explicit blacklist
+	 * is inpractical; apply the workaround on everything pre GEN6. The
+	 * platforms where the issue was seen:
+	 * Lenovo Thinkpad X301, X61s, X60, T60, X41
+	 * Fujitsu FSC S7110
+	 * Acer Aspire 1830T
 	 */
-	if (!(hibernation &&
-	      drm_dev->pdev->subsystem_vendor == PCI_VENDOR_ID_LENOVO &&
-	      INTEL_INFO(dev_priv)->gen == 4))
+	if (!(hibernation && INTEL_INFO(dev_priv)->gen < 6))
 		pci_set_power_state(drm_dev->pdev, PCI_D3hot);
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index fd1de451c..e1df8feb0 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3303,13 +3303,13 @@ int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
 #define I915_READ64(reg)	dev_priv->uncore.funcs.mmio_readq(dev_priv, (reg), true)
 
 #define I915_READ64_2x32(lower_reg, upper_reg) ({			\
-	u32 upper, lower, tmp;						\
-	tmp = I915_READ(upper_reg);					\
+	u32 upper, lower, old_upper, loop = 0;				\
+	upper = I915_READ(upper_reg);					\
 	do {								\
-		upper = tmp;						\
+		old_upper = upper;					\
 		lower = I915_READ(lower_reg);				\
-		tmp = I915_READ(upper_reg);				\
-	} while (upper != tmp);						\
+		upper = I915_READ(upper_reg);				\
+	} while (upper != old_upper && loop++ < 2);			\
 	(u64)upper << 32 | lower; })
 
 #define POSTING_READ(reg)	(void)I915_READ_NOTRACE(reg)
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index a7fa14516..5e6b4a29e 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -1024,6 +1024,7 @@ i915_gem_execbuffer_move_to_active(struct list_head *vmas,
 		u32 old_read = obj->base.read_domains;
 		u32 old_write = obj->base.write_domain;
 
+		obj->dirty = 1; /* be paranoid  */
 		obj->base.write_domain = obj->base.pending_write_domain;
 		if (obj->base.write_domain == 0)
 			obj->base.pending_read_domains |= obj->base.read_domains;
@@ -1031,7 +1032,6 @@ i915_gem_execbuffer_move_to_active(struct list_head *vmas,
 
 		i915_vma_move_to_active(vma, ring);
 		if (obj->base.write_domain) {
-			obj->dirty = 1;
 			i915_gem_request_assign(&obj->last_write_req, req);
 
 			intel_fb_obj_invalidate(obj, ring, ORIGIN_CS);
diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c
index e1d9b50f6..aff015c4a 100644
--- a/drivers/gpu/drm/i915/intel_csr.c
+++ b/drivers/gpu/drm/i915/intel_csr.c
@@ -350,7 +350,7 @@ static void finish_csr_load(const struct firmware *fw, void *context)
 	}
 	csr->mmio_count = dmc_header->mmio_count;
 	for (i = 0; i < dmc_header->mmio_count; i++) {
-		if (dmc_header->mmioaddr[i] < CSR_MMIO_START_RANGE &&
+		if (dmc_header->mmioaddr[i] < CSR_MMIO_START_RANGE ||
 			dmc_header->mmioaddr[i] > CSR_MMIO_END_RANGE) {
 			DRM_ERROR(" Firmware has wrong mmio address 0x%x\n",
 						dmc_header->mmioaddr[i]);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 87476ff18..107c6c051 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14665,6 +14665,24 @@ void intel_modeset_init(struct drm_device *dev)
 	if (INTEL_INFO(dev)->num_pipes == 0)
 		return;
 
+	/*
+	 * There may be no VBT; and if the BIOS enabled SSC we can
+	 * just keep using it to avoid unnecessary flicker.  Whereas if the
+	 * BIOS isn't using it, don't assume it will work even if the VBT
+	 * indicates as much.
+	 */
+	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+		bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
+					    DREF_SSC1_ENABLE);
+
+		if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
+			DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
+				     bios_lvds_use_ssc ? "en" : "dis",
+				     dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
+			dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
+		}
+	}
+
 	intel_init_display(dev);
 	intel_init_audio(dev);
 
@@ -15160,7 +15178,6 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 
 void intel_modeset_gem_init(struct drm_device *dev)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *c;
 	struct drm_i915_gem_object *obj;
 	int ret;
@@ -15169,16 +15186,6 @@ void intel_modeset_gem_init(struct drm_device *dev)
 	intel_init_gt_powersave(dev);
 	mutex_unlock(&dev->struct_mutex);
 
-	/*
-	 * There may be no VBT; and if the BIOS enabled SSC we can
-	 * just keep using it to avoid unnecessary flicker.  Whereas if the
-	 * BIOS isn't using it, don't assume it will work even if the VBT
-	 * indicates as much.
-	 */
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
-		dev_priv->vbt.lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
-						DREF_SSC1_ENABLE);
-
 	intel_modeset_init_hw(dev);
 
 	intel_setup_overlay(dev);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1df0e1fe2..bd8f8863e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4987,9 +4987,12 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 
 		intel_dp_probe_oui(intel_dp);
 
-		if (!intel_dp_probe_mst(intel_dp))
+		if (!intel_dp_probe_mst(intel_dp)) {
+			drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+			intel_dp_check_link_status(intel_dp);
+			drm_modeset_unlock(&dev->mode_config.connection_mutex);
 			goto mst_fail;
-
+		}
 	} else {
 		if (intel_dp->is_mst) {
 			if (intel_dp_check_mst_status(intel_dp) == -EINVAL)
@@ -4997,10 +5000,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 		}
 
 		if (!intel_dp->is_mst) {
-			/*
-			 * we'll check the link status via the normal hot plug path later -
-			 * but for short hpds we should check it now
-			 */
 			drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
 			intel_dp_check_link_status(intel_dp);
 			drm_modeset_unlock(&dev->mode_config.connection_mutex);
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index b5a5558ec..68b25dd52 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1036,11 +1036,7 @@ void intel_dsi_init(struct drm_device *dev)
 	intel_connector->unregister = intel_connector_unregister;
 
 	/* Pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI port C */
-	if (dev_priv->vbt.dsi.config->dual_link) {
-		/* XXX: does dual link work on either pipe? */
-		intel_encoder->crtc_mask = (1 << PIPE_A);
-		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
-	} else if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA) {
+	if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA) {
 		intel_encoder->crtc_mask = (1 << PIPE_A);
 		intel_dsi->ports = (1 << PORT_A);
 	} else if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIC) {
@@ -1048,6 +1044,9 @@ void intel_dsi_init(struct drm_device *dev)
 		intel_dsi->ports = (1 << PORT_C);
 	}
 
+	if (dev_priv->vbt.dsi.config->dual_link)
+		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
+
 	/* Create a DSI host (and a device) for each port. */
 	for_each_dsi_port(port, intel_dsi->ports) {
 		struct intel_dsi_host *host;
diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c
index a8dbb3ef4..7c6225c84 100644
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -160,9 +160,35 @@ static int qxl_add_monitors_config_modes(struct drm_connector *connector,
 	*pwidth = head->width;
 	*pheight = head->height;
 	drm_mode_probed_add(connector, mode);
+	/* remember the last custom size for mode validation */
+	qdev->monitors_config_width = mode->hdisplay;
+	qdev->monitors_config_height = mode->vdisplay;
 	return 1;
 }
 
+static struct mode_size {
+	int w;
+	int h;
+} common_modes[] = {
+	{ 640,  480},
+	{ 720,  480},
+	{ 800,  600},
+	{ 848,  480},
+	{1024,  768},
+	{1152,  768},
+	{1280,  720},
+	{1280,  800},
+	{1280,  854},
+	{1280,  960},
+	{1280, 1024},
+	{1440,  900},
+	{1400, 1050},
+	{1680, 1050},
+	{1600, 1200},
+	{1920, 1080},
+	{1920, 1200}
+};
+
 static int qxl_add_common_modes(struct drm_connector *connector,
                                 unsigned pwidth,
                                 unsigned pheight)
@@ -170,29 +196,6 @@ static int qxl_add_common_modes(struct drm_connector *connector,
 	struct drm_device *dev = connector->dev;
 	struct drm_display_mode *mode = NULL;
 	int i;
-	struct mode_size {
-		int w;
-		int h;
-	} common_modes[] = {
-		{ 640,  480},
-		{ 720,  480},
-		{ 800,  600},
-		{ 848,  480},
-		{1024,  768},
-		{1152,  768},
-		{1280,  720},
-		{1280,  800},
-		{1280,  854},
-		{1280,  960},
-		{1280, 1024},
-		{1440,  900},
-		{1400, 1050},
-		{1680, 1050},
-		{1600, 1200},
-		{1920, 1080},
-		{1920, 1200}
-	};
-
 	for (i = 0; i < ARRAY_SIZE(common_modes); i++) {
 		mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h,
 				    60, false, false, false);
@@ -823,11 +826,22 @@ static int qxl_conn_get_modes(struct drm_connector *connector)
 static int qxl_conn_mode_valid(struct drm_connector *connector,
 			       struct drm_display_mode *mode)
 {
+	struct drm_device *ddev = connector->dev;
+	struct qxl_device *qdev = ddev->dev_private;
+	int i;
+
 	/* TODO: is this called for user defined modes? (xrandr --add-mode)
 	 * TODO: check that the mode fits in the framebuffer */
-	DRM_DEBUG("%s: %dx%d status=%d\n", mode->name, mode->hdisplay,
-		  mode->vdisplay, mode->status);
-	return MODE_OK;
+
+	if(qdev->monitors_config_width == mode->hdisplay &&
+	   qdev->monitors_config_height == mode->vdisplay)
+		return MODE_OK;
+
+	for (i = 0; i < ARRAY_SIZE(common_modes); i++) {
+		if (common_modes[i].w == mode->hdisplay && common_modes[i].h == mode->vdisplay)
+			return MODE_OK;
+	}
+	return MODE_BAD;
 }
 
 static struct drm_encoder *qxl_best_encoder(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h
index d85496908..01a86948e 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.h
+++ b/drivers/gpu/drm/qxl/qxl_drv.h
@@ -325,6 +325,8 @@ struct qxl_device {
 	struct work_struct fb_work;
 
 	struct drm_property *hotplug_mode_update_property;
+	int monitors_config_width;
+	int monitors_config_height;
 };
 
 /* forward declaration for QXL_INFO_IO */
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index f81e0d7d0..9cd49c584 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -171,8 +171,9 @@ radeon_dp_aux_transfer_atom(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 		return -E2BIG;
 
 	tx_buf[0] = msg->address & 0xff;
-	tx_buf[1] = msg->address >> 8;
-	tx_buf[2] = msg->request << 4;
+	tx_buf[1] = (msg->address >> 8) & 0xff;
+	tx_buf[2] = (msg->request << 4) |
+		((msg->address >> 16) & 0xf);
 	tx_buf[3] = msg->size ? (msg->size - 1) : 0;
 
 	switch (msg->request & ~DP_AUX_I2C_MOT) {
diff --git a/drivers/gpu/drm/radeon/radeon_audio.c b/drivers/gpu/drm/radeon/radeon_audio.c
index fbc8d88d6..2c02e99b5 100644
--- a/drivers/gpu/drm/radeon/radeon_audio.c
+++ b/drivers/gpu/drm/radeon/radeon_audio.c
@@ -522,13 +522,15 @@ static int radeon_audio_set_avi_packet(struct drm_encoder *encoder,
 		return err;
 	}
 
-	if (drm_rgb_quant_range_selectable(radeon_connector_edid(connector))) {
-		if (radeon_encoder->output_csc == RADEON_OUTPUT_CSC_TVRGB)
-			frame.quantization_range = HDMI_QUANTIZATION_RANGE_LIMITED;
-		else
-			frame.quantization_range = HDMI_QUANTIZATION_RANGE_FULL;
-	} else {
-		frame.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT;
+	if (radeon_encoder->output_csc != RADEON_OUTPUT_CSC_BYPASS) {
+		if (drm_rgb_quant_range_selectable(radeon_connector_edid(connector))) {
+			if (radeon_encoder->output_csc == RADEON_OUTPUT_CSC_TVRGB)
+				frame.quantization_range = HDMI_QUANTIZATION_RANGE_LIMITED;
+			else
+				frame.quantization_range = HDMI_QUANTIZATION_RANGE_FULL;
+		} else {
+			frame.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT;
+		}
 	}
 
 	err = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer));
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 94b21ae70..5a2cafb4f 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -95,6 +95,11 @@ void radeon_connector_hotplug(struct drm_connector *connector)
 			if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
 				drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
 			} else if (radeon_dp_needs_link_train(radeon_connector)) {
+				/* Don't try to start link training before we
+				 * have the dpcd */
+				if (!radeon_dp_getdpcd(radeon_connector))
+					return;
+
 				/* set it to OFF so that drm_helper_connector_dpms()
 				 * won't return immediately since the current state
 				 * is ON at this point.
diff --git a/drivers/gpu/drm/radeon/radeon_dp_auxch.c b/drivers/gpu/drm/radeon/radeon_dp_auxch.c
index fcbd60bb0..3b0c229d7 100644
--- a/drivers/gpu/drm/radeon/radeon_dp_auxch.c
+++ b/drivers/gpu/drm/radeon/radeon_dp_auxch.c
@@ -116,8 +116,8 @@ radeon_dp_aux_transfer_native(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg
 	       AUX_SW_WR_BYTES(bytes));
 
 	/* write the data header into the registers */
-	/* request, addres, msg size */
-	byte = (msg->request << 4);
+	/* request, address, msg size */
+	byte = (msg->request << 4) | ((msg->address >> 16) & 0xf);
 	WREG32(AUX_SW_DATA + aux_offset[instance],
 	       AUX_SW_DATA_MASK(byte) | AUX_SW_AUTOINCREMENT_DISABLE);
 
diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index a2dbbbe0d..39bf74793 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -537,7 +537,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 	struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
 	struct hid_device *hdev = dev->hdev;
 	u8 buf[64];
-	__be16 word;
+	__le16 word;
 	ssize_t count;
 	size_t read_length = 0;
 	unsigned int retries;
@@ -554,7 +554,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		if (I2C_SMBUS_READ == read_write)
 			count = cp2112_read_req(buf, addr, read_length);
 		else
-			count = cp2112_write_req(buf, addr, data->byte, NULL,
+			count = cp2112_write_req(buf, addr, command, NULL,
 						 0);
 		break;
 	case I2C_SMBUS_BYTE_DATA:
@@ -569,7 +569,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		break;
 	case I2C_SMBUS_WORD_DATA:
 		read_length = 2;
-		word = cpu_to_be16(data->word);
+		word = cpu_to_le16(data->word);
 
 		if (I2C_SMBUS_READ == read_write)
 			count = cp2112_write_read_req(buf, addr, read_length,
@@ -582,7 +582,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		size = I2C_SMBUS_WORD_DATA;
 		read_write = I2C_SMBUS_READ;
 		read_length = 2;
-		word = cpu_to_be16(data->word);
+		word = cpu_to_le16(data->word);
 
 		count = cp2112_write_read_req(buf, addr, read_length, command,
 					      (u8 *)&word, 2);
@@ -675,7 +675,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		data->byte = buf[0];
 		break;
 	case I2C_SMBUS_WORD_DATA:
-		data->word = be16_to_cpup((__be16 *)buf);
+		data->word = le16_to_cpup((__le16 *)buf);
 		break;
 	case I2C_SMBUS_BLOCK_DATA:
 		if (read_length > I2C_SMBUS_BLOCK_MAX) {
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index bfbe1bedd..eab5bd6a2 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -164,7 +164,7 @@ static void hid_io_error(struct hid_device *hid)
 	if (time_after(jiffies, usbhid->stop_retry)) {
 
 		/* Retries failed, so do a port reset unless we lack bandwidth*/
-		if (test_bit(HID_NO_BANDWIDTH, &usbhid->iofl)
+		if (!test_bit(HID_NO_BANDWIDTH, &usbhid->iofl)
 		     && !test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) {
 
 			schedule_work(&usbhid->reset_work);
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 13ea1ea23..bda69a435 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -229,7 +229,7 @@ static int mma8452_get_hp_filter_index(struct mma8452_data *data,
 	int i = mma8452_get_odr_index(data);
 
 	return mma8452_get_int_plus_micros_index(mma8452_hp_filter_cutoff[i],
-		ARRAY_SIZE(mma8452_scales[0]), val, val2);
+		ARRAY_SIZE(mma8452_hp_filter_cutoff[0]), val, val2);
 }
 
 static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz)
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index b3d0e94f7..8d2439345 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -53,7 +53,8 @@ config ADXRS450
 config BMG160
 	tristate "BOSCH BMG160 Gyro Sensor"
 	depends on I2C
-	select IIO_TRIGGERED_BUFFER if IIO_BUFFER
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor
 	  driver. This driver also supports BMI055 gyroscope.
diff --git a/drivers/iio/imu/adis16400_core.c b/drivers/iio/imu/adis16400_core.c
index 2fd68f221..d42e4fe2c 100644
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -780,7 +780,7 @@ static struct adis16400_chip_info adis16400_chips[] = {
 		.flags = ADIS16400_HAS_PROD_ID |
 				ADIS16400_HAS_SERIAL_NUMBER |
 				ADIS16400_BURST_DIAG_STAT,
-		.gyro_scale_micro = IIO_DEGREE_TO_RAD(10000), /* 0.01 deg/s */
+		.gyro_scale_micro = IIO_DEGREE_TO_RAD(40000), /* 0.04 deg/s */
 		.accel_scale_micro = IIO_G_TO_M_S_2(833), /* 1/1200 g */
 		.temp_scale_nano = 73860000, /* 0.07386 C */
 		.temp_offset = 31000000 / 73860, /* 31 C = 0x00 */
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index 989605dd6..b94bfd3f5 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -110,6 +110,10 @@
 struct adis16480_chip_info {
 	unsigned int num_channels;
 	const struct iio_chan_spec *channels;
+	unsigned int gyro_max_val;
+	unsigned int gyro_max_scale;
+	unsigned int accel_max_val;
+	unsigned int accel_max_scale;
 };
 
 struct adis16480 {
@@ -497,19 +501,21 @@ static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
 static int adis16480_read_raw(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan, int *val, int *val2, long info)
 {
+	struct adis16480 *st = iio_priv(indio_dev);
+
 	switch (info) {
 	case IIO_CHAN_INFO_RAW:
 		return adis_single_conversion(indio_dev, chan, 0, val);
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->type) {
 		case IIO_ANGL_VEL:
-			*val = 0;
-			*val2 = IIO_DEGREE_TO_RAD(20000); /* 0.02 degree/sec */
-			return IIO_VAL_INT_PLUS_MICRO;
+			*val = st->chip_info->gyro_max_scale;
+			*val2 = st->chip_info->gyro_max_val;
+			return IIO_VAL_FRACTIONAL;
 		case IIO_ACCEL:
-			*val = 0;
-			*val2 = IIO_G_TO_M_S_2(800); /* 0.8 mg */
-			return IIO_VAL_INT_PLUS_MICRO;
+			*val = st->chip_info->accel_max_scale;
+			*val2 = st->chip_info->accel_max_val;
+			return IIO_VAL_FRACTIONAL;
 		case IIO_MAGN:
 			*val = 0;
 			*val2 = 100; /* 0.0001 gauss */
@@ -674,18 +680,39 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
 	[ADIS16375] = {
 		.channels = adis16485_channels,
 		.num_channels = ARRAY_SIZE(adis16485_channels),
+		/*
+		 * storing the value in rad/degree and the scale in degree
+		 * gives us the result in rad and better precession than
+		 * storing the scale directly in rad.
+		 */
+		.gyro_max_val = IIO_RAD_TO_DEGREE(22887),
+		.gyro_max_scale = 300,
+		.accel_max_val = IIO_M_S_2_TO_G(21973),
+		.accel_max_scale = 18,
 	},
 	[ADIS16480] = {
 		.channels = adis16480_channels,
 		.num_channels = ARRAY_SIZE(adis16480_channels),
+		.gyro_max_val = IIO_RAD_TO_DEGREE(22500),
+		.gyro_max_scale = 450,
+		.accel_max_val = IIO_M_S_2_TO_G(12500),
+		.accel_max_scale = 5,
 	},
 	[ADIS16485] = {
 		.channels = adis16485_channels,
 		.num_channels = ARRAY_SIZE(adis16485_channels),
+		.gyro_max_val = IIO_RAD_TO_DEGREE(22500),
+		.gyro_max_scale = 450,
+		.accel_max_val = IIO_M_S_2_TO_G(20000),
+		.accel_max_scale = 5,
 	},
 	[ADIS16488] = {
 		.channels = adis16480_channels,
 		.num_channels = ARRAY_SIZE(adis16480_channels),
+		.gyro_max_val = IIO_RAD_TO_DEGREE(22500),
+		.gyro_max_scale = 450,
+		.accel_max_val = IIO_M_S_2_TO_G(22500),
+		.accel_max_scale = 18,
 	},
 };
 
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 6eee1b044..b3fda9ee4 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -151,7 +151,7 @@ unsigned int iio_buffer_poll(struct file *filp,
 	struct iio_buffer *rb = indio_dev->buffer;
 
 	if (!indio_dev->info)
-		return -ENODEV;
+		return 0;
 
 	poll_wait(filp, &rb->pollq, wait);
 	if (iio_buffer_ready(indio_dev, rb, rb->watermark, 0))
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index 894d8137c..52d4fcb0d 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -84,7 +84,7 @@ static unsigned int iio_event_poll(struct file *filep,
 	unsigned int events = 0;
 
 	if (!indio_dev->info)
-		return -ENODEV;
+		return events;
 
 	poll_wait(filep, &ev_int->wait, wait);
 
diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c
index 1fe93cfea..9d0672b58 100644
--- a/drivers/md/dm-cache-target.c
+++ b/drivers/md/dm-cache-target.c
@@ -1729,6 +1729,8 @@ static void remap_cell_to_origin_clear_discard(struct cache *cache,
 		remap_to_origin(cache, bio);
 		issue(cache, bio);
 	}
+
+	free_prison_cell(cache, cell);
 }
 
 static void remap_cell_to_cache_dirty(struct cache *cache, struct dm_bio_prison_cell *cell,
@@ -1763,6 +1765,8 @@ static void remap_cell_to_cache_dirty(struct cache *cache, struct dm_bio_prison_
 		remap_to_cache(cache, bio, cblock);
 		issue(cache, bio);
 	}
+
+	free_prison_cell(cache, cell);
 }
 
 /*----------------------------------------------------------------*/
diff --git a/drivers/md/dm-stats.c b/drivers/md/dm-stats.c
index 8a8b48fa9..8289804cc 100644
--- a/drivers/md/dm-stats.c
+++ b/drivers/md/dm-stats.c
@@ -457,12 +457,24 @@ static int dm_stats_list(struct dm_stats *stats, const char *program,
 	list_for_each_entry(s, &stats->list, list_entry) {
 		if (!program || !strcmp(program, s->program_id)) {
 			len = s->end - s->start;
-			DMEMIT("%d: %llu+%llu %llu %s %s\n", s->id,
+			DMEMIT("%d: %llu+%llu %llu %s %s", s->id,
 				(unsigned long long)s->start,
 				(unsigned long long)len,
 				(unsigned long long)s->step,
 				s->program_id,
 				s->aux_data);
+			if (s->stat_flags & STAT_PRECISE_TIMESTAMPS)
+				DMEMIT(" precise_timestamps");
+			if (s->n_histogram_entries) {
+				unsigned i;
+				DMEMIT(" histogram:");
+				for (i = 0; i < s->n_histogram_entries; i++) {
+					if (i)
+						DMEMIT(",");
+					DMEMIT("%llu", s->histogram_boundaries[i]);
+				}
+			}
+			DMEMIT("\n");
 		}
 	}
 	mutex_unlock(&stats->mutex);
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 8bfda6ade..384574c39 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -845,10 +845,10 @@ struct device_node *of_find_matching_node_by_address(struct device_node *from,
 	struct resource res;
 
 	while (dn) {
-		if (of_address_to_resource(dn, 0, &res))
-			continue;
-		if (res.start == base_address)
+		if (!of_address_to_resource(dn, 0, &res) &&
+		    res.start == base_address)
 			return dn;
+
 		dn = of_find_matching_node(dn, matches);
 	}
 
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index d9b64a175..b965c1216 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -439,6 +439,56 @@ static const struct pci_vpd_ops pci_vpd_pci22_ops = {
 	.release = pci_vpd_pci22_release,
 };
 
+static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count,
+			       void *arg)
+{
+	struct pci_dev *tdev = pci_get_slot(dev->bus, PCI_SLOT(dev->devfn));
+	ssize_t ret;
+
+	if (!tdev)
+		return -ENODEV;
+
+	ret = pci_read_vpd(tdev, pos, count, arg);
+	pci_dev_put(tdev);
+	return ret;
+}
+
+static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count,
+				const void *arg)
+{
+	struct pci_dev *tdev = pci_get_slot(dev->bus, PCI_SLOT(dev->devfn));
+	ssize_t ret;
+
+	if (!tdev)
+		return -ENODEV;
+
+	ret = pci_write_vpd(tdev, pos, count, arg);
+	pci_dev_put(tdev);
+	return ret;
+}
+
+static const struct pci_vpd_ops pci_vpd_f0_ops = {
+	.read = pci_vpd_f0_read,
+	.write = pci_vpd_f0_write,
+	.release = pci_vpd_pci22_release,
+};
+
+static int pci_vpd_f0_dev_check(struct pci_dev *dev)
+{
+	struct pci_dev *tdev = pci_get_slot(dev->bus, PCI_SLOT(dev->devfn));
+	int ret = 0;
+
+	if (!tdev)
+		return -ENODEV;
+	if (!tdev->vpd || !tdev->multifunction ||
+	    dev->class != tdev->class || dev->vendor != tdev->vendor ||
+	    dev->device != tdev->device)
+		ret = -ENODEV;
+
+	pci_dev_put(tdev);
+	return ret;
+}
+
 int pci_vpd_pci22_init(struct pci_dev *dev)
 {
 	struct pci_vpd_pci22 *vpd;
@@ -447,12 +497,21 @@ int pci_vpd_pci22_init(struct pci_dev *dev)
 	cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
 	if (!cap)
 		return -ENODEV;
+	if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0) {
+		int ret = pci_vpd_f0_dev_check(dev);
+
+		if (ret)
+			return ret;
+	}
 	vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC);
 	if (!vpd)
 		return -ENOMEM;
 
 	vpd->base.len = PCI_VPD_PCI22_SIZE;
-	vpd->base.ops = &pci_vpd_pci22_ops;
+	if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0)
+		vpd->base.ops = &pci_vpd_f0_ops;
+	else
+		vpd->base.ops = &pci_vpd_pci22_ops;
 	mutex_init(&vpd->lock);
 	vpd->cap = cap;
 	vpd->busy = false;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e9fd0e90f..dbd13854f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1569,6 +1569,18 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB3
 
 #endif
 
+static void quirk_jmicron_async_suspend(struct pci_dev *dev)
+{
+	if (dev->multifunction) {
+		device_disable_async_suspend(&dev->dev);
+		dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n");
+	}
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend);
+
 #ifdef CONFIG_X86_IO_APIC
 static void quirk_alder_ioapic(struct pci_dev *pdev)
 {
@@ -1894,6 +1906,15 @@ static void quirk_netmos(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID,
 			 PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos);
 
+static void quirk_f0_vpd_link(struct pci_dev *dev)
+{
+	if (!dev->multifunction || !PCI_FUNC(dev->devfn))
+		return;
+	dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0;
+}
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+			      PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link);
+
 static void quirk_e100_interrupt(struct pci_dev *dev)
 {
 	u16 command, pmcsr;
@@ -2829,12 +2850,15 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
 
 static void fixup_ti816x_class(struct pci_dev *dev)
 {
+	u32 class = dev->class;
+
 	/* TI 816x devices do not have class code set when in PCIe boot mode */
-	dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
-	dev->class = PCI_CLASS_MULTIMEDIA_VIDEO;
+	dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8;
+	dev_info(&dev->dev, "PCI class overridden (%#08x -> %#08x)\n",
+		 class, dev->class);
 }
 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800,
-				 PCI_CLASS_NOT_DEFINED, 0, fixup_ti816x_class);
+			      PCI_CLASS_NOT_DEFINED, 0, fixup_ti816x_class);
 
 /* Some PCIe devices do not work reliably with the claimed maximum
  * payload size supported.
diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c
index bd2b75c0d..4fa7bcaf4 100644
--- a/drivers/regulator/pbias-regulator.c
+++ b/drivers/regulator/pbias-regulator.c
@@ -30,6 +30,7 @@
 struct pbias_reg_info {
 	u32 enable;
 	u32 enable_mask;
+	u32 disable_val;
 	u32 vmode;
 	unsigned int enable_time;
 	char *name;
@@ -62,6 +63,7 @@ static const struct pbias_reg_info pbias_mmc_omap2430 = {
 	.enable = BIT(1),
 	.enable_mask = BIT(1),
 	.vmode = BIT(0),
+	.disable_val = 0,
 	.enable_time = 100,
 	.name = "pbias_mmc_omap2430"
 };
@@ -77,6 +79,7 @@ static const struct pbias_reg_info pbias_sim_omap3 = {
 static const struct pbias_reg_info pbias_mmc_omap4 = {
 	.enable = BIT(26) | BIT(22),
 	.enable_mask = BIT(26) | BIT(25) | BIT(22),
+	.disable_val = BIT(25),
 	.vmode = BIT(21),
 	.enable_time = 100,
 	.name = "pbias_mmc_omap4"
@@ -85,6 +88,7 @@ static const struct pbias_reg_info pbias_mmc_omap4 = {
 static const struct pbias_reg_info pbias_mmc_omap5 = {
 	.enable = BIT(27) | BIT(26),
 	.enable_mask = BIT(27) | BIT(25) | BIT(26),
+	.disable_val = BIT(25),
 	.vmode = BIT(21),
 	.enable_time = 100,
 	.name = "pbias_mmc_omap5"
@@ -159,6 +163,7 @@ static int pbias_regulator_probe(struct platform_device *pdev)
 		drvdata[data_idx].desc.enable_reg = res->start;
 		drvdata[data_idx].desc.enable_mask = info->enable_mask;
 		drvdata[data_idx].desc.enable_val = info->enable;
+		drvdata[data_idx].desc.disable_val = info->disable_val;
 
 		cfg.init_data = pbias_matches[idx].init_data;
 		cfg.driver_data = &drvdata[data_idx];
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 75d0457a7..fa7036c4d 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -736,12 +736,12 @@ void tegra_pmc_init_tsense_reset(struct tegra_pmc *pmc)
 	u32 value, checksum;
 
 	if (!pmc->soc->has_tsense_reset)
-		goto out;
+		return;
 
 	np = of_find_node_by_name(pmc->dev->of_node, "i2c-thermtrip");
 	if (!np) {
 		dev_warn(dev, "i2c-thermtrip node not found, %s.\n", disabled);
-		goto out;
+		return;
 	}
 
 	if (of_property_read_u32(np, "nvidia,i2c-controller-id", &ctrl_id)) {
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 59705ab23..c9357bb39 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -553,13 +553,11 @@ static int bcm2835_spi_transfer_one(struct spi_master *master,
 	spi_used_hz = cdiv ? (clk_hz / cdiv) : (clk_hz / 65536);
 	bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
 
-	/* handle all the modes */
+	/* handle all the 3-wire mode */
 	if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf))
 		cs |= BCM2835_SPI_CS_REN;
-	if (spi->mode & SPI_CPOL)
-		cs |= BCM2835_SPI_CS_CPOL;
-	if (spi->mode & SPI_CPHA)
-		cs |= BCM2835_SPI_CS_CPHA;
+	else
+		cs &= ~BCM2835_SPI_CS_REN;
 
 	/* for gpio_cs set dummy CS so that no HW-CS get changed
 	 * we can not run this in bcm2835_spi_set_cs, as it does
@@ -592,6 +590,25 @@ static int bcm2835_spi_transfer_one(struct spi_master *master,
 	return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
 }
 
+static int bcm2835_spi_prepare_message(struct spi_master *master,
+				       struct spi_message *msg)
+{
+	struct spi_device *spi = msg->spi;
+	struct bcm2835_spi *bs = spi_master_get_devdata(master);
+	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+
+	cs &= ~(BCM2835_SPI_CS_CPOL | BCM2835_SPI_CS_CPHA);
+
+	if (spi->mode & SPI_CPOL)
+		cs |= BCM2835_SPI_CS_CPOL;
+	if (spi->mode & SPI_CPHA)
+		cs |= BCM2835_SPI_CS_CPHA;
+
+	bcm2835_wr(bs, BCM2835_SPI_CS, cs);
+
+	return 0;
+}
+
 static void bcm2835_spi_handle_err(struct spi_master *master,
 				   struct spi_message *msg)
 {
@@ -739,6 +756,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 	master->set_cs = bcm2835_spi_set_cs;
 	master->transfer_one = bcm2835_spi_transfer_one;
 	master->handle_err = bcm2835_spi_handle_err;
+	master->prepare_message = bcm2835_spi_prepare_message;
 	master->dev.of_node = pdev->dev.of_node;
 
 	bs = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h
index 06b34e5bc..47bb9b898 100644
--- a/drivers/spi/spi-bitbang-txrx.h
+++ b/drivers/spi/spi-bitbang-txrx.h
@@ -49,7 +49,7 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
 {
 	/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
 
-	bool oldbit = !(word & 1);
+	u32 oldbit = (!(word & (1<<(bits-1)))) << 31;
 	/* clock starts at inactive polarity */
 	for (word <<= (32 - bits); likely(bits); bits--) {
 
@@ -81,7 +81,7 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
 {
 	/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
 
-	bool oldbit = !(word & (1 << 31));
+	u32 oldbit = (!(word & (1<<(bits-1)))) << 31;
 	/* clock starts at inactive polarity */
 	for (word <<= (32 - bits); likely(bits); bits--) {
 
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index eb03e1215..7edede6e0 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -74,6 +74,9 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 
 	dws->max_freq = clk_get_rate(dwsmmio->clk);
 
+	of_property_read_u32(pdev->dev.of_node, "reg-io-width",
+			     &dws->reg_io_width);
+
 	num_cs = 4;
 
 	if (pdev->dev.of_node)
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 8d67d03c7..4fbfcdc5c 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -194,7 +194,7 @@ static void dw_writer(struct dw_spi *dws)
 			else
 				txw = *(u16 *)(dws->tx);
 		}
-		dw_writel(dws, DW_SPI_DR, txw);
+		dw_write_io_reg(dws, DW_SPI_DR, txw);
 		dws->tx += dws->n_bytes;
 	}
 }
@@ -205,7 +205,7 @@ static void dw_reader(struct dw_spi *dws)
 	u16 rxw;
 
 	while (max--) {
-		rxw = dw_readl(dws, DW_SPI_DR);
+		rxw = dw_read_io_reg(dws, DW_SPI_DR);
 		/* Care rx only if the transfer's original "rx" is not null */
 		if (dws->rx_end - dws->len) {
 			if (dws->n_bytes == 1)
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 6c91391c1..b75ed327d 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -109,6 +109,7 @@ struct dw_spi {
 	u32			fifo_len;	/* depth of the FIFO buffer */
 	u32			max_freq;	/* max bus freq supported */
 
+	u32			reg_io_width;	/* DR I/O width in bytes */
 	u16			bus_num;
 	u16			num_cs;		/* supported slave numbers */
 
@@ -145,11 +146,45 @@ static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
 	return __raw_readl(dws->regs + offset);
 }
 
+static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
+{
+	return __raw_readw(dws->regs + offset);
+}
+
 static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
 {
 	__raw_writel(val, dws->regs + offset);
 }
 
+static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
+{
+	__raw_writew(val, dws->regs + offset);
+}
+
+static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset)
+{
+	switch (dws->reg_io_width) {
+	case 2:
+		return dw_readw(dws, offset);
+	case 4:
+	default:
+		return dw_readl(dws, offset);
+	}
+}
+
+static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val)
+{
+	switch (dws->reg_io_width) {
+	case 2:
+		dw_writew(dws, offset, val);
+		break;
+	case 4:
+	default:
+		dw_writel(dws, offset, val);
+		break;
+	}
+}
+
 static inline void spi_enable_chip(struct dw_spi *dws, int enable)
 {
 	dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index acce90ac7..bb916c8d4 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -105,6 +105,10 @@ struct img_spfi {
 	bool rx_dma_busy;
 };
 
+struct img_spfi_device_data {
+	bool gpio_requested;
+};
+
 static inline u32 spfi_readl(struct img_spfi *spfi, u32 reg)
 {
 	return readl(spfi->regs + reg);
@@ -267,15 +271,15 @@ static int img_spfi_start_pio(struct spi_master *master,
 		cpu_relax();
 	}
 
-	ret = spfi_wait_all_done(spfi);
-	if (ret < 0)
-		return ret;
-
 	if (rx_bytes > 0 || tx_bytes > 0) {
 		dev_err(spfi->dev, "PIO transfer timed out\n");
 		return -ETIMEDOUT;
 	}
 
+	ret = spfi_wait_all_done(spfi);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
@@ -440,21 +444,50 @@ static int img_spfi_unprepare(struct spi_master *master,
 
 static int img_spfi_setup(struct spi_device *spi)
 {
-	int ret;
-
-	ret = gpio_request_one(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ?
-			       GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
-			       dev_name(&spi->dev));
-	if (ret)
-		dev_err(&spi->dev, "can't request chipselect gpio %d\n",
+	int ret = -EINVAL;
+	struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
+
+	if (!spfi_data) {
+		spfi_data = kzalloc(sizeof(*spfi_data), GFP_KERNEL);
+		if (!spfi_data)
+			return -ENOMEM;
+		spfi_data->gpio_requested = false;
+		spi_set_ctldata(spi, spfi_data);
+	}
+	if (!spfi_data->gpio_requested) {
+		ret = gpio_request_one(spi->cs_gpio,
+				       (spi->mode & SPI_CS_HIGH) ?
+				       GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
+				       dev_name(&spi->dev));
+		if (ret)
+			dev_err(&spi->dev, "can't request chipselect gpio %d\n",
 				spi->cs_gpio);
-
+		else
+			spfi_data->gpio_requested = true;
+	} else {
+		if (gpio_is_valid(spi->cs_gpio)) {
+			int mode = ((spi->mode & SPI_CS_HIGH) ?
+				    GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH);
+
+			ret = gpio_direction_output(spi->cs_gpio, mode);
+			if (ret)
+				dev_err(&spi->dev, "chipselect gpio %d setup failed (%d)\n",
+					spi->cs_gpio, ret);
+		}
+	}
 	return ret;
 }
 
 static void img_spfi_cleanup(struct spi_device *spi)
 {
-	gpio_free(spi->cs_gpio);
+	struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
+
+	if (spfi_data) {
+		if (spfi_data->gpio_requested)
+			gpio_free(spi->cs_gpio);
+		kfree(spfi_data);
+		spi_set_ctldata(spi, NULL);
+	}
 }
 
 static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 586738412..3d09e0b69 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -245,6 +245,7 @@ static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
 
 static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
 {
+	struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
 	u32 l;
 
 	/* The controller handles the inverted chip selects
@@ -255,6 +256,12 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
 		enable = !enable;
 
 	if (spi->controller_state) {
+		int err = pm_runtime_get_sync(mcspi->dev);
+		if (err < 0) {
+			dev_err(mcspi->dev, "failed to get sync: %d\n", err);
+			return;
+		}
+
 		l = mcspi_cached_chconf0(spi);
 
 		if (enable)
@@ -263,6 +270,9 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
 			l |= OMAP2_MCSPI_CHCONF_FORCE;
 
 		mcspi_write_chconf0(spi, l);
+
+		pm_runtime_mark_last_busy(mcspi->dev);
+		pm_runtime_put_autosuspend(mcspi->dev);
 	}
 }
 
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 8cad107a5..a87cfd4ba 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -41,6 +41,11 @@
 #define ORION_SPI_DATA_OUT_REG		0x08
 #define ORION_SPI_DATA_IN_REG		0x0c
 #define ORION_SPI_INT_CAUSE_REG		0x10
+#define ORION_SPI_TIMING_PARAMS_REG	0x18
+
+#define ORION_SPI_TMISO_SAMPLE_MASK	(0x3 << 6)
+#define ORION_SPI_TMISO_SAMPLE_1	(1 << 6)
+#define ORION_SPI_TMISO_SAMPLE_2	(2 << 6)
 
 #define ORION_SPI_MODE_CPOL		(1 << 11)
 #define ORION_SPI_MODE_CPHA		(1 << 12)
@@ -70,6 +75,7 @@ struct orion_spi_dev {
 	unsigned int		min_divisor;
 	unsigned int		max_divisor;
 	u32			prescale_mask;
+	bool			is_errata_50mhz_ac;
 };
 
 struct orion_spi {
@@ -195,6 +201,41 @@ orion_spi_mode_set(struct spi_device *spi)
 	writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
 }
 
+static void
+orion_spi_50mhz_ac_timing_erratum(struct spi_device *spi, unsigned int speed)
+{
+	u32 reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	/*
+	 * Erratum description: (Erratum NO. FE-9144572) The device
+	 * SPI interface supports frequencies of up to 50 MHz.
+	 * However, due to this erratum, when the device core clock is
+	 * 250 MHz and the SPI interfaces is configured for 50MHz SPI
+	 * clock and CPOL=CPHA=1 there might occur data corruption on
+	 * reads from the SPI device.
+	 * Erratum Workaround:
+	 * Work in one of the following configurations:
+	 * 1. Set CPOL=CPHA=0 in "SPI Interface Configuration
+	 * Register".
+	 * 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1
+	 * Register" before setting the interface.
+	 */
+	reg = readl(spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG));
+	reg &= ~ORION_SPI_TMISO_SAMPLE_MASK;
+
+	if (clk_get_rate(orion_spi->clk) == 250000000 &&
+			speed == 50000000 && spi->mode & SPI_CPOL &&
+			spi->mode & SPI_CPHA)
+		reg |= ORION_SPI_TMISO_SAMPLE_2;
+	else
+		reg |= ORION_SPI_TMISO_SAMPLE_1; /* This is the default value */
+
+	writel(reg, spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG));
+}
+
 /*
  * called only when no transfer is active on the bus
  */
@@ -216,6 +257,9 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 
 	orion_spi_mode_set(spi);
 
+	if (orion_spi->devdata->is_errata_50mhz_ac)
+		orion_spi_50mhz_ac_timing_erratum(spi, speed);
+
 	rc = orion_spi_baudrate_set(spi, speed);
 	if (rc)
 		return rc;
@@ -413,6 +457,14 @@ static const struct orion_spi_dev armada_375_spi_dev_data = {
 	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
 };
 
+static const struct orion_spi_dev armada_380_spi_dev_data = {
+	.typ = ARMADA_SPI,
+	.max_hz = 50000000,
+	.max_divisor = 1920,
+	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+	.is_errata_50mhz_ac = true,
+};
+
 static const struct of_device_id orion_spi_of_match_table[] = {
 	{
 		.compatible = "marvell,orion-spi",
@@ -428,7 +480,7 @@ static const struct of_device_id orion_spi_of_match_table[] = {
 	},
 	{
 		.compatible = "marvell,armada-380-spi",
-		.data = &armada_xp_spi_dev_data,
+		.data = &armada_380_spi_dev_data,
 	},
 	{
 		.compatible = "marvell,armada-390-spi",
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index d3370a612..a7629f8ed 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -48,8 +48,8 @@ struct sh_msiof_spi_priv {
 	const struct sh_msiof_chipdata *chipdata;
 	struct sh_msiof_spi_info *info;
 	struct completion done;
-	int tx_fifo_size;
-	int rx_fifo_size;
+	unsigned int tx_fifo_size;
+	unsigned int rx_fifo_size;
 	void *tx_dma_page;
 	void *rx_dma_page;
 	dma_addr_t tx_dma_addr;
@@ -95,8 +95,6 @@ struct sh_msiof_spi_priv {
 #define MDR2_WDLEN1(i)	(((i) - 1) << 16) /* Word Count (1-64/256 (SH, A1))) */
 #define MDR2_GRPMASK1	0x00000001 /* Group Output Mask 1 (SH, A1) */
 
-#define MAX_WDLEN	256U
-
 /* TSCR and RSCR */
 #define SCR_BRPS_MASK	    0x1f00 /* Prescaler Setting (1-32) */
 #define SCR_BRPS(i)	(((i) - 1) << 8)
@@ -850,7 +848,12 @@ static int sh_msiof_transfer_one(struct spi_master *master,
 		 *  DMA supports 32-bit words only, hence pack 8-bit and 16-bit
 		 *  words, with byte resp. word swapping.
 		 */
-		unsigned int l = min(len, MAX_WDLEN * 4);
+		unsigned int l = 0;
+
+		if (tx_buf)
+			l = min(len, p->tx_fifo_size * 4);
+		if (rx_buf)
+			l = min(len, p->rx_fifo_size * 4);
 
 		if (bits <= 8) {
 			if (l & 3)
@@ -963,7 +966,7 @@ static const struct sh_msiof_chipdata sh_data = {
 
 static const struct sh_msiof_chipdata r8a779x_data = {
 	.tx_fifo_size = 64,
-	.rx_fifo_size = 256,
+	.rx_fifo_size = 64,
 	.master_flags = SPI_MASTER_MUST_TX,
 };
 
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 133f53a9c..a339c1e99 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -249,19 +249,23 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 	xspi->tx_ptr = t->tx_buf;
 	xspi->rx_ptr = t->rx_buf;
 	remaining_words = t->len / xspi->bytes_per_word;
-	reinit_completion(&xspi->done);
 
 	if (xspi->irq >= 0 &&  remaining_words > xspi->buffer_size) {
+		u32 isr;
 		use_irq = true;
-		xspi->write_fn(XSPI_INTR_TX_EMPTY,
-				xspi->regs + XIPIF_V123B_IISR_OFFSET);
-		/* Enable the global IPIF interrupt */
-		xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
-				xspi->regs + XIPIF_V123B_DGIER_OFFSET);
 		/* Inhibit irq to avoid spurious irqs on tx_empty*/
 		cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
 		xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
 			       xspi->regs + XSPI_CR_OFFSET);
+		/* ACK old irqs (if any) */
+		isr = xspi->read_fn(xspi->regs + XIPIF_V123B_IISR_OFFSET);
+		if (isr)
+			xspi->write_fn(isr,
+				       xspi->regs + XIPIF_V123B_IISR_OFFSET);
+		/* Enable the global IPIF interrupt */
+		xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
+				xspi->regs + XIPIF_V123B_DGIER_OFFSET);
+		reinit_completion(&xspi->done);
 	}
 
 	while (remaining_words) {
@@ -302,8 +306,10 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 		remaining_words -= n_words;
 	}
 
-	if (use_irq)
+	if (use_irq) {
 		xspi->write_fn(0, xspi->regs + XIPIF_V123B_DGIER_OFFSET);
+		xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
+	}
 
 	return t->len;
 }
diff --git a/drivers/staging/comedi/drivers/adl_pci7x3x.c b/drivers/staging/comedi/drivers/adl_pci7x3x.c
index 934af3ff7..b0fc027cf 100644
--- a/drivers/staging/comedi/drivers/adl_pci7x3x.c
+++ b/drivers/staging/comedi/drivers/adl_pci7x3x.c
@@ -120,8 +120,20 @@ static int adl_pci7x3x_do_insn_bits(struct comedi_device *dev,
 {
 	unsigned long reg = (unsigned long)s->private;
 
-	if (comedi_dio_update_state(s, data))
-		outl(s->state, dev->iobase + reg);
+	if (comedi_dio_update_state(s, data)) {
+		unsigned int val = s->state;
+
+		if (s->n_chan == 16) {
+			/*
+			 * It seems the PCI-7230 needs the 16-bit DO state
+			 * to be shifted left by 16 bits before being written
+			 * to the 32-bit register.  Set the value in both
+			 * halves of the register to be sure.
+			 */
+			val |= val << 16;
+		}
+		outl(val, dev->iobase + reg);
+	}
 
 	data[1] = s->state;
 
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index eaa9add49..dc0b25a54 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -550,27 +550,6 @@ static int usbduxsigma_ai_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 3;
 
-	/* Step 4: fix up any arguments */
-
-	if (high_speed) {
-		/*
-		 * every 2 channels get a time window of 125us. Thus, if we
-		 * sample all 16 channels we need 1ms. If we sample only one
-		 * channel we need only 125us
-		 */
-		devpriv->ai_interval = interval;
-		devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
-	} else {
-		/* interval always 1ms */
-		devpriv->ai_interval = 1;
-		devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
-	}
-	if (devpriv->ai_timer < 1)
-		err |= -EINVAL;
-
-	if (err)
-		return 4;
-
 	return 0;
 }
 
@@ -668,6 +647,22 @@ static int usbduxsigma_ai_cmd(struct comedi_device *dev,
 
 	down(&devpriv->sem);
 
+	if (devpriv->high_speed) {
+		/*
+		 * every 2 channels get a time window of 125us. Thus, if we
+		 * sample all 16 channels we need 1ms. If we sample only one
+		 * channel we need only 125us
+		 */
+		unsigned int interval = usbduxsigma_chans_to_interval(len);
+
+		devpriv->ai_interval = interval;
+		devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
+	} else {
+		/* interval always 1ms */
+		devpriv->ai_interval = 1;
+		devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
+	}
+
 	for (i = 0; i < len; i++) {
 		unsigned int chan  = CR_CHAN(cmd->chanlist[i]);
 
@@ -917,25 +912,6 @@ static int usbduxsigma_ao_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 3;
 
-	/* Step 4: fix up any arguments */
-
-	/* we count in timer steps */
-	if (high_speed) {
-		/* timing of the conversion itself: every 125 us */
-		devpriv->ao_timer = cmd->convert_arg / 125000;
-	} else {
-		/*
-		 * timing of the scan: every 1ms
-		 * we get all channels at once
-		 */
-		devpriv->ao_timer = cmd->scan_begin_arg / 1000000;
-	}
-	if (devpriv->ao_timer < 1)
-		err |= -EINVAL;
-
-	if (err)
-		return 4;
-
 	return 0;
 }
 
@@ -948,6 +924,20 @@ static int usbduxsigma_ao_cmd(struct comedi_device *dev,
 
 	down(&devpriv->sem);
 
+	if (cmd->convert_src == TRIG_TIMER) {
+		/*
+		 * timing of the conversion itself: every 125 us
+		 * at high speed (not used yet)
+		 */
+		devpriv->ao_timer = cmd->convert_arg / 125000;
+	} else {
+		/*
+		 * timing of the scan: every 1ms
+		 * we get all channels at once
+		 */
+		devpriv->ao_timer = cmd->scan_begin_arg / 1000000;
+	}
+
 	devpriv->ao_counter = devpriv->ao_timer;
 
 	if (cmd->start_src == TRIG_NOW) {
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index 947c98000..fc141a00f 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -1826,8 +1826,8 @@ void rtl8192_hard_data_xmit(struct sk_buff *skb, struct net_device *dev,
 		return;
 	}
 
-	if (queue_index != TXCMD_QUEUE)
-		netdev_warn(dev, "%s(): queue index != TXCMD_QUEUE\n",
+	if (queue_index == TXCMD_QUEUE)
+		netdev_warn(dev, "%s(): queue index == TXCMD_QUEUE\n",
 			    __func__);
 
 	memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
diff --git a/drivers/staging/unisys/visorbus/visorchipset.c b/drivers/staging/unisys/visorbus/visorchipset.c
index bb8087e70..44269d58e 100644
--- a/drivers/staging/unisys/visorbus/visorchipset.c
+++ b/drivers/staging/unisys/visorbus/visorchipset.c
@@ -2381,6 +2381,9 @@ static struct acpi_driver unisys_acpi_driver = {
 		.remove = visorchipset_exit,
 		},
 };
+
+MODULE_DEVICE_TABLE(acpi, unisys_device_ids);
+
 static __init uint32_t visorutil_spar_detect(void)
 {
 	unsigned int eax, ebx, ecx, edx;
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index d75a66c72..b470df122 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -100,6 +100,7 @@ struct omap8250_priv {
 	struct work_struct qos_work;
 	struct uart_8250_dma omap8250_dma;
 	spinlock_t rx_dma_lock;
+	bool rx_dma_broken;
 };
 
 static u32 uart_read(struct uart_8250_port *up, u32 reg)
@@ -754,6 +755,7 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
 	struct omap8250_priv	*priv = p->port.private_data;
 	struct uart_8250_dma	*dma = p->dma;
 	unsigned long		flags;
+	int ret;
 
 	spin_lock_irqsave(&priv->rx_dma_lock, flags);
 
@@ -762,7 +764,9 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
 		return;
 	}
 
-	dmaengine_pause(dma->rxchan);
+	ret = dmaengine_pause(dma->rxchan);
+	if (WARN_ON_ONCE(ret))
+		priv->rx_dma_broken = true;
 
 	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
 
@@ -806,6 +810,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 		break;
 	}
 
+	if (priv->rx_dma_broken)
+		return -EINVAL;
+
 	spin_lock_irqsave(&priv->rx_dma_lock, flags);
 
 	if (dma->rx_running)
@@ -1180,6 +1187,11 @@ static int omap8250_probe(struct platform_device *pdev)
 
 			if (of_machine_is_compatible("ti,am33xx"))
 				priv->habit |= OMAP_DMA_TX_KICK;
+			/*
+			 * pause is currently not supported atleast on omap-sdma
+			 * and edma on most earlier kernels.
+			 */
+			priv->rx_dma_broken = true;
 		}
 	}
 #endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index e55f18b93..46ddce479 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2017,6 +2017,12 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
 
+#define PCI_VENDOR_ID_PERICOM			0x12D8
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7952	0x7952
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7954	0x7954
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7958	0x7958
+
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
@@ -2331,27 +2337,12 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	 * Pericom
 	 */
 	{
-		.vendor		= 0x12d8,
-		.device		= 0x7952,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
-	},
-	{
-		.vendor		= 0x12d8,
-		.device		= 0x7954,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
-	},
-	{
-		.vendor		= 0x12d8,
-		.device		= 0x7958,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
+		.vendor         = PCI_VENDOR_ID_PERICOM,
+		.device         = PCI_ANY_ID,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_pericom_setup,
 	},
-
 	/*
 	 * PLX
 	 */
@@ -3056,6 +3047,10 @@ enum pci_board_num_t {
 	pbn_fintek_8,
 	pbn_fintek_12,
 	pbn_wch384_4,
+	pbn_pericom_PI7C9X7951,
+	pbn_pericom_PI7C9X7952,
+	pbn_pericom_PI7C9X7954,
+	pbn_pericom_PI7C9X7958,
 };
 
 /*
@@ -3881,7 +3876,6 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 115200,
 		.first_offset	= 0x40,
 	},
-
 	[pbn_wch384_4] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 4,
@@ -3889,6 +3883,33 @@ static struct pciserial_board pci_boards[] = {
 		.uart_offset    = 8,
 		.first_offset   = 0xC0,
 	},
+	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	[pbn_pericom_PI7C9X7951] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 1,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7952] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 2,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7954] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 4,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7958] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 8,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
 };
 
 static const struct pci_device_id blacklist[] = {
@@ -5154,6 +5175,25 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0,
 		0, pbn_exar_XR17V8358 },
 	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7951 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7952 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7954 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7958 },
+	/*
 	 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
 	 */
 	{	PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 50a09cd76..658b392d1 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -41,6 +41,12 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"AEI1240",		0	},
 	/* Rockwell 56K ACF II Fax+Data+Voice Modem */
 	{	"AKY1021",		0 /*SPCI_FL_NO_SHIRQ*/	},
+	/*
+	 * ALi Fast Infrared Controller
+	 * Native driver (ali-ircc) is broken so at least
+	 * it can be used with irtty-sir.
+	 */
+	{	"ALI5123",		0	},
 	/* AZT3005 PnP SOUND DEVICE */
 	{	"AZT4001",		0	},
 	/* Best Data Products Inc. Smart One 336F PnP Modem */
@@ -364,6 +370,11 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	/* Winbond CIR port, should not be probed. We should keep track
 	   of it to prevent the legacy serial driver from probing it */
 	{	"WEC1022",		CIR_PORT	},
+	/*
+	 * SMSC IrCC SIR/FIR port, should not be probed by serial driver
+	 * as well so its own driver can bind to it.
+	 */
+	{	"SMCF010",		CIR_PORT	},
 	{	"",			0	}
 };
 
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 7d79425c2..d11621e2c 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -218,6 +218,7 @@ static int uniphier_uart_probe(struct platform_device *pdev)
 	ret = serial8250_register_8250_port(&up);
 	if (ret < 0) {
 		dev_err(dev, "failed to register 8250 port\n");
+		clk_disable_unprepare(priv->clk);
 		return ret;
 	}
 
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
index 35c55505b..5a41b8fbb 100644
--- a/drivers/tty/serial/men_z135_uart.c
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -392,7 +392,6 @@ static irqreturn_t men_z135_intr(int irq, void *data)
 	struct men_z135_port *uart = (struct men_z135_port *)data;
 	struct uart_port *port = &uart->port;
 	bool handled = false;
-	unsigned long flags;
 	int irq_id;
 
 	uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
@@ -401,7 +400,7 @@ static irqreturn_t men_z135_intr(int irq, void *data)
 	if (!irq_id)
 		goto out;
 
-	spin_lock_irqsave(&port->lock, flags);
+	spin_lock(&port->lock);
 	/* It's save to write to IIR[7:6] RXC[9:8] */
 	iowrite8(irq_id, port->membase + MEN_Z135_STAT_REG);
 
@@ -427,7 +426,7 @@ static irqreturn_t men_z135_intr(int irq, void *data)
 		handled = true;
 	}
 
-	spin_unlock_irqrestore(&port->lock, flags);
+	spin_unlock(&port->lock);
 out:
 	return IRQ_RETVAL(handled);
 }
@@ -717,7 +716,7 @@ static void men_z135_set_termios(struct uart_port *port,
 
 	baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16);
 
-	spin_lock(&port->lock);
+	spin_lock_irq(&port->lock);
 	if (tty_termios_baud_rate(termios))
 		tty_termios_encode_baud_rate(termios, baud, baud);
 
@@ -725,7 +724,7 @@ static void men_z135_set_termios(struct uart_port *port,
 	iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG);
 
 	uart_update_timeout(port, termios->c_cflag, baud);
-	spin_unlock(&port->lock);
+	spin_unlock_irq(&port->lock);
 }
 
 static const char *men_z135_type(struct uart_port *port)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 67d0c213b..5916311ee 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -295,15 +295,6 @@ static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
 	if (ourport->tx_mode != S3C24XX_TX_DMA)
 		enable_tx_dma(ourport);
 
-	while (xmit->tail & (dma_get_cache_alignment() - 1)) {
-		if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
-			return 0;
-		wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-		count--;
-	}
-
 	dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
 	dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
 
@@ -342,7 +333,9 @@ static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
 		return;
 	}
 
-	if (!ourport->dma || !ourport->dma->tx_chan || count < port->fifosize)
+	if (!ourport->dma || !ourport->dma->tx_chan ||
+	    count < ourport->min_dma_size ||
+	    xmit->tail & (dma_get_cache_alignment() - 1))
 		s3c24xx_serial_start_tx_pio(ourport);
 	else
 		s3c24xx_serial_start_tx_dma(ourport, count);
@@ -736,15 +729,20 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 	struct uart_port *port = &ourport->port;
 	struct circ_buf *xmit = &port->state->xmit;
 	unsigned long flags;
-	int count;
+	int count, dma_count = 0;
 
 	spin_lock_irqsave(&port->lock, flags);
 
 	count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 
-	if (ourport->dma && ourport->dma->tx_chan && count >= port->fifosize) {
-		s3c24xx_serial_start_tx_dma(ourport, count);
-		goto out;
+	if (ourport->dma && ourport->dma->tx_chan &&
+	    count >= ourport->min_dma_size) {
+		int align = dma_get_cache_alignment() -
+			(xmit->tail & (dma_get_cache_alignment() - 1));
+		if (count-align >= ourport->min_dma_size) {
+			dma_count = count-align;
+			count = align;
+		}
 	}
 
 	if (port->x_char) {
@@ -765,14 +763,24 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 
 	/* try and drain the buffer... */
 
-	count = port->fifosize;
-	while (!uart_circ_empty(xmit) && count-- > 0) {
+	if (count > port->fifosize) {
+		count = port->fifosize;
+		dma_count = 0;
+	}
+
+	while (!uart_circ_empty(xmit) && count > 0) {
 		if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
 			break;
 
 		wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
+		count--;
+	}
+
+	if (!count && dma_count) {
+		s3c24xx_serial_start_tx_dma(ourport, dma_count);
+		goto out;
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
@@ -1838,6 +1846,13 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	else if (ourport->info->fifosize)
 		ourport->port.fifosize = ourport->info->fifosize;
 
+	/*
+	 * DMA transfers must be aligned at least to cache line size,
+	 * so find minimal transfer size suitable for DMA mode
+	 */
+	ourport->min_dma_size = max_t(int, ourport->port.fifosize,
+				    dma_get_cache_alignment());
+
 	probe_index++;
 
 	dbg("%s: initialising port %p...\n", __func__, ourport);
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index d275032aa..fc5deaa4f 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -82,6 +82,7 @@ struct s3c24xx_uart_port {
 	unsigned char			tx_claimed;
 	unsigned int			pm_level;
 	unsigned long			baudclk_rate;
+	unsigned int			min_dma_size;
 
 	unsigned int			rx_irq;
 	unsigned int			tx_irq;
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 69e769c35..06ecd1e68 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -820,6 +820,11 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 		unsigned maxp = ep0->endpoint.maxpacket;
 
 		transfer_size += (maxp - (transfer_size % maxp));
+
+		/* Maximum of DWC3_EP0_BOUNCE_SIZE can only be received */
+		if (transfer_size > DWC3_EP0_BOUNCE_SIZE)
+			transfer_size = DWC3_EP0_BOUNCE_SIZE;
+
 		transferred = min_t(u32, ur->length,
 				transfer_size - length);
 		memcpy(ur->buf, dwc->ep0_bounce, transferred);
@@ -941,11 +946,14 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 			return;
 		}
 
-		WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
-
 		maxpacket = dep->endpoint.maxpacket;
 		transfer_size = roundup(req->request.length, maxpacket);
 
+		if (transfer_size > DWC3_EP0_BOUNCE_SIZE) {
+			dev_WARN(dwc->dev, "bounce buf can't handle req len\n");
+			transfer_size = DWC3_EP0_BOUNCE_SIZE;
+		}
+
 		dwc->ep0_bounced = true;
 
 		/*
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 531861547..96d935b00 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -975,6 +975,29 @@ free_ep(struct uac2_rtd_params *prm, struct usb_ep *ep)
 			"%s:%d Error!\n", __func__, __LINE__);
 }
 
+static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
+	struct usb_endpoint_descriptor *ep_desc,
+	unsigned int factor, bool is_playback)
+{
+	int chmask, srate, ssize;
+	u16 max_packet_size;
+
+	if (is_playback) {
+		chmask = uac2_opts->p_chmask;
+		srate = uac2_opts->p_srate;
+		ssize = uac2_opts->p_ssize;
+	} else {
+		chmask = uac2_opts->c_chmask;
+		srate = uac2_opts->c_srate;
+		ssize = uac2_opts->c_ssize;
+	}
+
+	max_packet_size = num_channels(chmask) * ssize *
+		DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)));
+	ep_desc->wMaxPacketSize = cpu_to_le16(min(max_packet_size,
+				le16_to_cpu(ep_desc->wMaxPacketSize)));
+}
+
 static int
 afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 {
@@ -1070,10 +1093,14 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 	uac2->p_prm.uac2 = uac2;
 	uac2->c_prm.uac2 = uac2;
 
+	/* Calculate wMaxPacketSize according to audio bandwidth */
+	set_ep_max_packet_size(uac2_opts, &fs_epin_desc, 1000, true);
+	set_ep_max_packet_size(uac2_opts, &fs_epout_desc, 1000, false);
+	set_ep_max_packet_size(uac2_opts, &hs_epin_desc, 8000, true);
+	set_ep_max_packet_size(uac2_opts, &hs_epout_desc, 8000, false);
+
 	hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
-	hs_epout_desc.wMaxPacketSize = fs_epout_desc.wMaxPacketSize;
 	hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
-	hs_epin_desc.wMaxPacketSize = fs_epin_desc.wMaxPacketSize;
 
 	ret = usb_assign_descriptors(fn, fs_audio_desc, hs_audio_desc, NULL);
 	if (ret)
diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
index 309706fe4..9704053df 100644
--- a/drivers/usb/gadget/udc/m66592-udc.c
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -1052,7 +1052,7 @@ static void set_feature(struct m66592 *m66592, struct usb_ctrlrequest *ctrl)
 				tmp = m66592_read(m66592, M66592_INTSTS0) &
 								M66592_CTSQ;
 				udelay(1);
-			} while (tmp != M66592_CS_IDST || timeout-- > 0);
+			} while (tmp != M66592_CS_IDST && timeout-- > 0);
 
 			if (tmp == M66592_CS_IDST)
 				m66592_bset(m66592,
diff --git a/drivers/usb/host/ehci-sysfs.c b/drivers/usb/host/ehci-sysfs.c
index 5e44407aa..5216f2b09 100644
--- a/drivers/usb/host/ehci-sysfs.c
+++ b/drivers/usb/host/ehci-sysfs.c
@@ -29,7 +29,7 @@ static ssize_t show_companion(struct device *dev,
 	int			count = PAGE_SIZE;
 	char			*ptr = buf;
 
-	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+	ehci = hcd_to_ehci(dev_get_drvdata(dev));
 	nports = HCS_N_PORTS(ehci->hcs_params);
 
 	for (index = 0; index < nports; ++index) {
@@ -54,7 +54,7 @@ static ssize_t store_companion(struct device *dev,
 	struct ehci_hcd		*ehci;
 	int			portnum, new_owner;
 
-	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+	ehci = hcd_to_ehci(dev_get_drvdata(dev));
 	new_owner = PORT_OWNER;		/* Owned by companion */
 	if (sscanf(buf, "%d", &portnum) != 1)
 		return -EINVAL;
@@ -85,7 +85,7 @@ static ssize_t show_uframe_periodic_max(struct device *dev,
 	struct ehci_hcd		*ehci;
 	int			n;
 
-	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+	ehci = hcd_to_ehci(dev_get_drvdata(dev));
 	n = scnprintf(buf, PAGE_SIZE, "%d\n", ehci->uframe_periodic_max);
 	return n;
 }
@@ -101,7 +101,7 @@ static ssize_t store_uframe_periodic_max(struct device *dev,
 	unsigned long		flags;
 	ssize_t			ret;
 
-	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+	ehci = hcd_to_ehci(dev_get_drvdata(dev));
 	if (kstrtouint(buf, 0, &uframe_periodic_max) < 0)
 		return -EINVAL;
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4c8b3b821..a5a0376bb 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -605,6 +605,10 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2WI_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX3_PID) },
 	/*
 	 * ELV devices:
 	 */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 792e05412..2943b97b2 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -568,6 +568,14 @@
  */
 #define FTDI_SYNAPSE_SS200_PID 0x9090 /* SS200 - SNAP Stick 200 */
 
+/*
+ * CustomWare / ShipModul NMEA multiplexers product ids (FTDI_VID)
+ */
+#define FTDI_CUSTOMWARE_MINIPLEX_PID	0xfd48	/* MiniPlex first generation NMEA Multiplexer */
+#define FTDI_CUSTOMWARE_MINIPLEX2_PID	0xfd49	/* MiniPlex-USB and MiniPlex-2 series */
+#define FTDI_CUSTOMWARE_MINIPLEX2WI_PID	0xfd4a	/* MiniPlex-2Wi */
+#define FTDI_CUSTOMWARE_MINIPLEX3_PID	0xfd4b	/* MiniPlex-3 series */
+
 
 /********************************/
 /** third-party VID/PID combos **/
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index f5257af33..ae682e4ee 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -362,21 +362,38 @@ static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4],
 static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4],
 								speed_t baud)
 {
-	unsigned int tmp;
+	unsigned int baseline, mantissa, exponent;
 
 	/*
 	 * Apparently the formula is:
-	 * baudrate = 12M * 32 / (2^buf[1]) / buf[0]
+	 *   baudrate = 12M * 32 / (mantissa * 4^exponent)
+	 * where
+	 *   mantissa = buf[8:0]
+	 *   exponent = buf[11:9]
 	 */
-	tmp = 12000000 * 32 / baud;
+	baseline = 12000000 * 32;
+	mantissa = baseline / baud;
+	if (mantissa == 0)
+		mantissa = 1;	/* Avoid dividing by zero if baud > 32*12M. */
+	exponent = 0;
+	while (mantissa >= 512) {
+		if (exponent < 7) {
+			mantissa >>= 2;	/* divide by 4 */
+			exponent++;
+		} else {
+			/* Exponent is maxed. Trim mantissa and leave. */
+			mantissa = 511;
+			break;
+		}
+	}
+
 	buf[3] = 0x80;
 	buf[2] = 0;
-	buf[1] = (tmp >= 256);
-	while (tmp >= 256) {
-		tmp >>= 2;
-		buf[1] <<= 1;
-	}
-	buf[0] = tmp;
+	buf[1] = exponent << 1 | mantissa >> 8;
+	buf[0] = mantissa & 0xff;
+
+	/* Calculate and return the exact baud rate. */
+	baud = (baseline / mantissa) >> (exponent << 1);
 
 	return baud;
 }
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index d15654572..ebcec8cda 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -139,6 +139,7 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x0AF0, 0x8120)},	/* Option GTM681W */
 
 	/* non-Gobi Sierra Wireless devices */
+	{DEVICE_SWI(0x03f0, 0x4e1d)},	/* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
 	{DEVICE_SWI(0x0f3d, 0x68a2)},	/* Sierra Wireless MC7700 */
 	{DEVICE_SWI(0x114f, 0x68a2)},	/* Sierra Wireless MC7750 */
 	{DEVICE_SWI(0x1199, 0x68a2)},	/* Sierra Wireless MC7710 */
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 8fceec729..6ed804450 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -94,7 +94,7 @@ exit:
 
 static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct symbol_private *priv = usb_get_serial_data(port->serial);
+	struct symbol_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	int result = 0;
 
@@ -120,7 +120,7 @@ static void symbol_close(struct usb_serial_port *port)
 static void symbol_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct symbol_private *priv = usb_get_serial_data(port->serial);
+	struct symbol_private *priv = usb_get_serial_port_data(port);
 
 	spin_lock_irq(&priv->lock);
 	priv->throttled = true;
@@ -130,7 +130,7 @@ static void symbol_throttle(struct tty_struct *tty)
 static void symbol_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct symbol_private *priv = usb_get_serial_data(port->serial);
+	struct symbol_private *priv = usb_get_serial_port_data(port);
 	int result;
 	bool was_throttled;