Initial import

1 files changed, 285 insertions, 0 deletions

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
new file mode 100644
index 000000000..653dc9c4e
--- /dev/null
+++ b/include/linux/ethtool.h
@@ -0,0 +1,285 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+#ifndef _LINUX_ETHTOOL_H
+#define _LINUX_ETHTOOL_H
+
+#include <linux/compat.h>
+#include <uapi/linux/ethtool.h>
+
+#ifdef CONFIG_COMPAT
+
+struct compat_ethtool_rx_flow_spec {
+	u32		flow_type;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
+	compat_u64	ring_cookie;
+	u32		location;
+};
+
+struct compat_ethtool_rxnfc {
+	u32				cmd;
+	u32				flow_type;
+	compat_u64			data;
+	struct compat_ethtool_rx_flow_spec fs;
+	u32				rule_cnt;
+	u32				rule_locs[0];
+};
+
+#endif /* CONFIG_COMPAT */
+
+#include <linux/rculist.h>
+
+extern int __ethtool_get_settings(struct net_device *dev,
+				  struct ethtool_cmd *cmd);
+
+/**
+ * enum ethtool_phys_id_state - indicator state for physical identification
+ * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
+ * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
+ * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ */
+enum ethtool_phys_id_state {
+	ETHTOOL_ID_INACTIVE,
+	ETHTOOL_ID_ACTIVE,
+	ETHTOOL_ID_ON,
+	ETHTOOL_ID_OFF
+};
+
+enum {
+	ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
+	ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
+
+	/*
+	 * Add your fresh new hash function bits above and remember to update
+	 * rss_hash_func_strings[] in ethtool.c
+	 */
+	ETH_RSS_HASH_FUNCS_COUNT
+};
+
+#define __ETH_RSS_HASH_BIT(bit)	((u32)1 << (bit))
+#define __ETH_RSS_HASH(name)	__ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
+
+#define ETH_RSS_HASH_TOP	__ETH_RSS_HASH(TOP)
+#define ETH_RSS_HASH_XOR	__ETH_RSS_HASH(XOR)
+
+#define ETH_RSS_HASH_UNKNOWN	0
+#define ETH_RSS_HASH_NO_CHANGE	0
+
+struct net_device;
+
+/* Some generic methods drivers may use in their ethtool_ops */
+u32 ethtool_op_get_link(struct net_device *dev);
+int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
+
+/**
+ * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
+ * @index: Index in RX flow hash indirection table
+ * @n_rx_rings: Number of RX rings to use
+ *
+ * This function provides the default policy for RX flow hash indirection.
+ */
+static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
+{
+	return index % n_rx_rings;
+}
+
+/**
+ * struct ethtool_ops - optional netdev operations
+ * @get_settings: Get various device settings including Ethernet link
+ *	settings. The @cmd parameter is expected to have been cleared
+ *	before get_settings is called. Returns a negative error code or
+ *	zero.
+ * @set_settings: Set various device settings including Ethernet link
+ *	settings.  Returns a negative error code or zero.
+ * @get_drvinfo: Report driver/device information.  Should only set the
+ *	@driver, @version, @fw_version and @bus_info fields.  If not
+ *	implemented, the @driver and @bus_info fields will be filled in
+ *	according to the netdev's parent device.
+ * @get_regs_len: Get buffer length required for @get_regs
+ * @get_regs: Get device registers
+ * @get_wol: Report whether Wake-on-Lan is enabled
+ * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
+ *	or zero.
+ * @get_msglevel: Report driver message level.  This should be the value
+ *	of the @msg_enable field used by netif logging functions.
+ * @set_msglevel: Set driver message level
+ * @nway_reset: Restart autonegotiation.  Returns a negative error code
+ *	or zero.
+ * @get_link: Report whether physical link is up.  Will only be called if
+ *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
+ *	which uses netif_carrier_ok().
+ * @get_eeprom: Read data from the device EEPROM.
+ *	Should fill in the magic field.  Don't need to check len for zero
+ *	or wraparound.  Fill in the data argument with the eeprom values
+ *	from offset to offset + len.  Update len to the amount read.
+ *	Returns an error or zero.
+ * @set_eeprom: Write data to the device EEPROM.
+ *	Should validate the magic field.  Don't need to check len for zero
+ *	or wraparound.  Update len to the amount written.  Returns an error
+ *	or zero.
+ * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
+ * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
+ * @get_ringparam: Report ring sizes
+ * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
+ * @get_pauseparam: Report pause parameters
+ * @set_pauseparam: Set pause parameters.  Returns a negative error code
+ *	or zero.
+ * @self_test: Run specified self-tests
+ * @get_strings: Return a set of strings that describe the requested objects
+ * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
+ *	attached to it.  The implementation may update the indicator
+ *	asynchronously or synchronously, but in either case it must return
+ *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
+ *	and must either activate asynchronous updates and return zero, return
+ *	a negative error or return a positive frequency for synchronous
+ *	indication (e.g. 1 for one on/off cycle per second).  If it returns
+ *	a frequency then it will be called again at intervals with the
+ *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
+ *	the indicator accordingly.  Finally, it is called with the argument
+ *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
+ *	negative error code or zero.
+ * @get_ethtool_stats: Return extended statistics about the device.
+ *	This is only useful if the device maintains statistics not
+ *	included in &struct rtnl_link_stats64.
+ * @begin: Function to be called before any other operation.  Returns a
+ *	negative error code or zero.
+ * @complete: Function to be called after any other operation except
+ *	@begin.  Will be called even if the other operation failed.
+ * @get_priv_flags: Report driver-specific feature flags.
+ * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
+ *	error code or zero.
+ * @get_sset_count: Get number of strings that @get_strings will write.
+ * @get_rxnfc: Get RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @set_rxnfc: Set RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @flash_device: Write a firmware image to device's flash memory.
+ *	Returns a negative error code or zero.
+ * @reset: Reset (part of) the device, as specified by a bitmask of
+ *	flags from &enum ethtool_reset_flags.  Returns a negative
+ *	error code or zero.
+ * @get_rxfh_key_size: Get the size of the RX flow hash key.
+ *	Returns zero if not supported for this specific device.
+ * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
+ *	Returns zero if not supported for this specific device.
+ * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
+ *	and/or hash function.
+ *	Returns a negative error code or zero.
+ * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
+ *	key, and/or hash function.  Arguments which are set to %NULL or zero
+ *	will remain unchanged.
+ *	Returns a negative error code or zero. An error code must be returned
+ *	if at least one unsupported change was requested.
+ * @get_channels: Get number of channels.
+ * @set_channels: Set number of channels.  Returns a negative error code or
+ *	zero.
+ * @get_dump_flag: Get dump flag indicating current dump length, version,
+ * 		   and flag of the device.
+ * @get_dump_data: Get dump data.
+ * @set_dump: Set dump specific flags to the device.
+ * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
+ *	Drivers supporting transmit time stamps in software should set this to
+ *	ethtool_op_get_ts_info().
+ * @get_module_info: Get the size and type of the eeprom contained within
+ *	a plug-in module.
+ * @get_module_eeprom: Get the eeprom information from the plug-in module
+ * @get_eee: Get Energy-Efficient (EEE) supported and status.
+ * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
+ *
+ * All operations are optional (i.e. the function pointer may be set
+ * to %NULL) and callers must take this into account.  Callers must
+ * hold the RTNL lock.
+ *
+ * See the structures used by these operations for further documentation.
+ * Note that for all operations using a structure ending with a zero-
+ * length array, the array is allocated separately in the kernel and
+ * is passed to the driver as an additional parameter.
+ *
+ * See &struct net_device and &struct net_device_ops for documentation
+ * of the generic netdev features interface.
+ */
+struct ethtool_ops {
+	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
+	int	(*set_settings)(struct net_device *, struct ethtool_cmd *);
+	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
+	int	(*get_regs_len)(struct net_device *);
+	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
+	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
+	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
+	u32	(*get_msglevel)(struct net_device *);
+	void	(*set_msglevel)(struct net_device *, u32);
+	int	(*nway_reset)(struct net_device *);
+	u32	(*get_link)(struct net_device *);
+	int	(*get_eeprom_len)(struct net_device *);
+	int	(*get_eeprom)(struct net_device *,
+			      struct ethtool_eeprom *, u8 *);
+	int	(*set_eeprom)(struct net_device *,
+			      struct ethtool_eeprom *, u8 *);
+	int	(*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
+	int	(*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
+	void	(*get_ringparam)(struct net_device *,
+				 struct ethtool_ringparam *);
+	int	(*set_ringparam)(struct net_device *,
+				 struct ethtool_ringparam *);
+	void	(*get_pauseparam)(struct net_device *,
+				  struct ethtool_pauseparam*);
+	int	(*set_pauseparam)(struct net_device *,
+				  struct ethtool_pauseparam*);
+	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
+	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
+	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
+	void	(*get_ethtool_stats)(struct net_device *,
+				     struct ethtool_stats *, u64 *);
+	int	(*begin)(struct net_device *);
+	void	(*complete)(struct net_device *);
+	u32	(*get_priv_flags)(struct net_device *);
+	int	(*set_priv_flags)(struct net_device *, u32);
+	int	(*get_sset_count)(struct net_device *, int);
+	int	(*get_rxnfc)(struct net_device *,
+			     struct ethtool_rxnfc *, u32 *rule_locs);
+	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
+	int	(*flash_device)(struct net_device *, struct ethtool_flash *);
+	int	(*reset)(struct net_device *, u32 *);
+	u32	(*get_rxfh_key_size)(struct net_device *);
+	u32	(*get_rxfh_indir_size)(struct net_device *);
+	int	(*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
+			    u8 *hfunc);
+	int	(*set_rxfh)(struct net_device *, const u32 *indir,
+			    const u8 *key, const u8 hfunc);
+	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
+	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
+	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
+	int	(*get_dump_data)(struct net_device *,
+				 struct ethtool_dump *, void *);
+	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
+	int	(*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
+	int     (*get_module_info)(struct net_device *,
+				   struct ethtool_modinfo *);
+	int     (*get_module_eeprom)(struct net_device *,
+				     struct ethtool_eeprom *, u8 *);
+	int	(*get_eee)(struct net_device *, struct ethtool_eee *);
+	int	(*set_eee)(struct net_device *, struct ethtool_eee *);
+	int	(*get_tunable)(struct net_device *,
+			       const struct ethtool_tunable *, void *);
+	int	(*set_tunable)(struct net_device *,
+			       const struct ethtool_tunable *, const void *);
+
+
+};
+#endif /* _LINUX_ETHTOOL_H */