1 files changed, 61 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
new file mode 100644
index 000000000..109b3eddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
@@ -0,0 +1,61 @@
+Binding for a type of STMicroelectronics clock crossbar (VCC).
+
+The crossbar can take up to 4 input clocks and control up to 16
+output clocks. Not all inputs or outputs have to be in use in a
+particular instantiation. Each output can be individually enabled,
+select any of the input clocks and apply a divide (by 1,2,4 or 8) to
+that selected clock.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,stih416-clkgenc",		"st,vcc"
+	"st,stih416-clkgenf",		"st,vcc"
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 16
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       16 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
+		#clock-cells = <1>;
+		compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
+		reg = <0xfe8308ac 12>;
+
+		clocks = <&clk_s_vcc_hd>,
+			 <&clockgen_c 1>,
+			 <&clk_s_tmds_fromphy>,
+			 <&clockgen_c 2>;
+
+		clock-output-names  = "clk-s-pix-hdmi",
+				      "clk-s-pix-dvo",
+				      "clk-s-out-dvo",
+				      "clk-s-pix-hd",
+				      "clk-s-hddac",
+				      "clk-s-denc",
+				      "clk-s-sddac",
+				      "clk-s-pix-main",
+				      "clk-s-pix-aux",
+				      "clk-s-stfe-frc-0",
+				      "clk-s-ref-mcru",
+				      "clk-s-slave-mcru",
+				      "clk-s-tmds-hdmi",
+				      "clk-s-hdmi-reject-pll",
+				      "clk-s-thsens";
+	};
+