summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/gpio/gpio-altera.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio-altera.txt')
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-altera.txt4
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
index 12f50149e..826a7208c 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -12,7 +12,7 @@ Required properties:
- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
- The first cell is the GPIO offset number within the GPIO controller.
- interrupts: Specify the interrupt.
-- altr,interrupt-trigger: Specifies the interrupt trigger type the GPIO
+- altr,interrupt-type: Specifies the interrupt trigger type the GPIO
hardware is synthesized. This field is required if the Altera GPIO controller
used has IRQ enabled as the interrupt type is not software controlled,
but hardware synthesized. Required if GPIO is used as an interrupt
@@ -35,7 +35,7 @@ gpio_altr: gpio@0xff200000 {
reg = <0xff200000 0x10>;
interrupts = <0 45 4>;
altr,ngpio = <32>;
- altr,interrupt-trigger = <IRQ_TYPE_EDGE_RISING>;
+ altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <1>;