summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mfd/axp20x.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mfd/axp20x.txt')
-rw-r--r--Documentation/devicetree/bindings/mfd/axp20x.txt96
1 files changed, 96 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
new file mode 100644
index 000000000..98685f291
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -0,0 +1,96 @@
+AXP202/AXP209 device tree bindings
+
+The axp20x family current members :
+axp202 (X-Powers)
+axp209 (X-Powers)
+
+Required properties:
+- compatible: "x-powers,axp202" or "x-powers,axp209"
+- reg: The I2C slave address for the AXP chip
+- interrupt-parent: The parent interrupt controller
+- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
+- interrupt-controller: axp20x has its own internal IRQs
+- #interrupt-cells: Should be set to 1
+
+Optional properties:
+- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
+ (range: 750-1875). Default: 1.5MHz
+- <input>-supply: a phandle to the regulator supply node. May be omitted if
+ inputs are unregulated, such as using the IPSOUT output
+ from the PMIC.
+
+- regulators: A node that houses a sub-node for each regulator. Regulators
+ not used but preferred to be managed by the OS should be
+ listed as well.
+ See Documentation/devicetree/bindings/regulator/regulator.txt
+ for more information on standard regulator bindings.
+
+Optional properties for DCDC regulators:
+- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode
+ Default: Current hardware setting
+ The DCDC regulators work in a mixed PWM/PFM mode,
+ using PFM under light loads and switching to PWM
+ for heavier loads. Forcing PWM mode trades efficiency
+ under light loads for lower output noise. This
+ probably makes sense for HiFi audio related
+ applications that aren't battery constrained.
+
+
+AXP202/AXP209 regulators, type, and corresponding input supply names:
+
+Regulator Type Supply Name Notes
+--------- ---- ----------- -----
+DCDC2 : DC-DC buck : vin2-supply
+DCDC3 : DC-DC buck : vin3-supply
+LDO1 : LDO : acin-supply : always on
+LDO2 : LDO : ldo24in-supply : shared supply
+LDO3 : LDO : ldo3in-supply
+LDO4 : LDO : ldo24in-supply : shared supply
+LDO5 : LDO : ldo5in-supply
+
+Example:
+
+axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ x-powers,dcdc-freq = <1500>;
+
+ vdd_cpu: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ vdd_int_dll: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+ };
+
+ vdd_rtc: ldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-rtc";
+ };
+
+ avcc: ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+ };
+
+ ldo3 {
+ /* unused but preferred to be managed by OS */
+ };
+ };
+};