summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mmc/mmci.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/mmci.txt')
-rw-r--r--Documentation/devicetree/bindings/mmc/mmci.txt61
1 files changed, 61 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
new file mode 100644
index 000000000..03796cf2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -0,0 +1,61 @@
+* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1
+
+The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
+reading and writing to MultiMedia and SD cards alike.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the mmci driver. Using "st" as
+the prefix for a property, indicates support by the ST Micro variant.
+
+Required properties:
+- compatible : contains "arm,pl18x", "arm,primecell".
+- vmmc-supply : phandle to the regulator device tree node, mentioned
+ as the VCC/VDD supply in the eMMC/SD specs.
+
+Optional properties:
+- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
+ the ID provided by the HW
+- vqmmc-supply : phandle to the regulator device tree node, mentioned
+ as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+- st,sig-dir-dat0 : bus signal direction pin used for DAT[0].
+- st,sig-dir-dat2 : bus signal direction pin used for DAT[2].
+- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1].
+- st,sig-dir-dat74 : bus signal direction pin used for DAT[4] to DAT[7].
+- st,sig-dir-cmd : cmd signal direction pin used for CMD.
+- st,sig-pin-fbclk : feedback clock signal pin used.
+
+Deprecated properties:
+- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable.
+- mmc-cap-sd-highspeed : indicates whether SD is high speed capable.
+
+Example:
+
+sdi0_per1@80126000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80126000 0x1000>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+ <&dma 29 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+ clock-names = "sdi", "apb_pclk";
+
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cd-gpios = <&gpio2 31 0x4>; // 95
+ st,sig-dir-dat0;
+ st,sig-dir-dat2;
+ st,sig-dir-cmd;
+ st,sig-pin-fbclk;
+
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&vmmci>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi0_default_mode>;
+ pinctrl-1 = <&sdi0_sleep_mode>;
+};