summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/powerpc/4xx/akebono.txt')
-rw-r--r--Documentation/devicetree/bindings/powerpc/4xx/akebono.txt54
1 files changed, 54 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
new file mode 100644
index 000000000..db939210e
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
@@ -0,0 +1,54 @@
+
+IBM Akebono board device tree
+=============================
+
+The IBM Akebono board is a development board for the PPC476GTR SoC.
+
+0) The root node
+
+ Required properties:
+
+ - model : "ibm,akebono".
+ - compatible : "ibm,akebono" , "ibm,476gtr".
+
+1.a) The Secure Digital Host Controller Interface (SDHCI) node
+
+ Represent the Secure Digital Host Controller Interfaces.
+
+ Required properties:
+
+ - compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
+ - reg : should contain the SDHCI registers location and length.
+ - interrupt-parent : a phandle for the interrupt controller.
+ - interrupts : should contain the SDHCI interrupt.
+
+1.b) The Advanced Host Controller Interface (AHCI) SATA node
+
+ Represents the advanced host controller SATA interface.
+
+ Required properties:
+
+ - compatible : should be "ibm,476gtr-ahci".
+ - reg : should contain the AHCI registers location and length.
+ - interrupt-parent : a phandle for the interrupt controller.
+ - interrupts : should contain the AHCI interrupt.
+
+1.c) The FPGA node
+
+ The Akebono board stores some board information such as the revision
+ number in an FPGA which is represented by this node.
+
+ Required properties:
+
+ - compatible : should be "ibm,akebono-fpga".
+ - reg : should contain the FPGA registers location and length.
+
+1.d) The AVR node
+
+ The Akebono board has an Atmel AVR microprocessor attached to the I2C
+ bus as a power controller for the board.
+
+ Required properties:
+
+ - compatible : should be "ibm,akebono-avr".
+ - reg : should contain the I2C bus address for the AVR.