1 files changed, 0 insertions, 41 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt
deleted file mode 100644
index 87bc60486..000000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* I2C
-
-The I2C controller is expressed as a bus under the CPM node.
-
-Properties:
-- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c"
-- reg : On CPM2 devices, the second resource doesn't specify the I2C
-  Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM
-  (typically 0x8afc 0x2).
-- #address-cells : Should be one. The cell is the i2c device address with
-  the r/w bit set to zero.
-- #size-cells : Should be zero.
-- clock-frequency : Can be used to set the i2c clock frequency. If
-  unspecified, a default frequency of 60kHz is being used.
-The following two properties are deprecated. They are only used by legacy
-i2c drivers to find the bus to probe:
-- linux,i2c-index : Can be used to hard code an i2c bus number. By default,
-  the bus number is dynamically assigned by the i2c core.
-- linux,i2c-class : Can be used to override the i2c class. The class is used
-  by legacy i2c device drivers to find a bus in a specific context like
-  system management, video or sound. By default, I2C_CLASS_HWMON (1) is
-  being used. The definition of the classes can be found in
-  include/i2c/i2c.h
-
-Example, based on mpc823:
-
-	i2c@860 {
-		compatible = "fsl,mpc823-i2c",
-			     "fsl,cpm1-i2c";
-		reg = <0x860 0x20 0x3c80 0x30>;
-		interrupts = <16>;
-		interrupt-parent = <&CPM_PIC>;
-		fsl,cpm-command = <0x10>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@68 {
-			compatible = "dallas,ds1307";
-			reg = <0x68>;
-		};
-	};