1 files changed, 0 insertions, 51 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/par_io.txt
deleted file mode 100644
index 609842602..000000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/par_io.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Parallel I/O Ports
-
-This node configures Parallel I/O ports for CPUs with QE support.
-The node should reside in the "soc" node of the tree.  For each
-device that using parallel I/O ports, a child node should be created.
-See the definition of the Pin configuration nodes below for more
-information.
-
-Required properties:
-- device_type : should be "par_io".
-- reg : offset to the register set and its length.
-- num-ports : number of Parallel I/O ports
-
-Example:
-par_io@1400 {
-	reg = <1400 100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	device_type = "par_io";
-	num-ports = <7>;
-	ucc_pin@01 {
-		......
-	};
-
-Note that "par_io" nodes are obsolete, and should not be used for
-the new device trees. Instead, each Par I/O bank should be represented
-via its own gpio-controller node:
-
-Required properties:
-- #gpio-cells : should be "2".
-- compatible : should be "fsl,<chip>-qe-pario-bank",
-  "fsl,mpc8323-qe-pario-bank".
-- reg : offset to the register set and its length.
-- gpio-controller : node to identify gpio controllers.
-
-Example:
-	qe_pio_a: gpio-controller@1400 {
-		#gpio-cells = <2>;
-		compatible = "fsl,mpc8360-qe-pario-bank",
-		"fsl,mpc8323-qe-pario-bank";
-		reg = <0x1400 0x18>;
-		gpio-controller;
-	  };
-
-	qe_pio_e: gpio-controller@1460 {
-		#gpio-cells = <2>;
-		compatible = "fsl,mpc8360-qe-pario-bank",
-			     "fsl,mpc8323-qe-pario-bank";
-		reg = <0x1460 0x18>;
-		gpio-controller;
-	  };