1 files changed, 0 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt
deleted file mode 100644
index ec6ee2e86..000000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Pin configuration nodes
-
-Required properties:
-- pio-map : array of pin configurations.  Each pin is defined by 6
-  integers.  The six numbers are respectively: port, pin, dir,
-  open_drain, assignment, has_irq.
-  - port : port number of the pin; 0-6 represent port A-G in UM.
-  - pin : pin number in the port.
-  - dir : direction of the pin, should encode as follows:
-
-     0 = The pin is disabled
-     1 = The pin is an output
-     2 = The pin is an input
-     3 = The pin is I/O
-
-  - open_drain : indicates the pin is normal or wired-OR:
-
-     0 = The pin is actively driven as an output
-     1 = The pin is an open-drain driver. As an output, the pin is
-         driven active-low, otherwise it is three-stated.
-
-  - assignment : function number of the pin according to the Pin Assignment
-    tables in User Manual.  Each pin can have up to 4 possible functions in
-    QE and two options for CPM.
-  - has_irq : indicates if the pin is used as source of external
-    interrupts.
-
-Example:
-     ucc_pin@01 {
-	pio-map = <
-	/* port  pin  dir  open_drain  assignment  has_irq */
-		0  3  1  0  1  0 	/* TxD0 */
-		0  4  1  0  1  0 	/* TxD1 */
-		0  5  1  0  1  0 	/* TxD2 */
-		0  6  1  0  1  0 	/* TxD3 */
-		1  6  1  0  3  0 	/* TxD4 */
-		1  7  1  0  1  0 	/* TxD5 */
-		1  9  1  0  2  0 	/* TxD6 */
-		1  a  1  0  2  0 	/* TxD7 */
-		0  9  2  0  1  0 	/* RxD0 */
-		0  a  2  0  1  0 	/* RxD1 */
-		0  b  2  0  1  0 	/* RxD2 */
-		0  c  2  0  1  0 	/* RxD3 */
-		0  d  2  0  1  0 	/* RxD4 */
-		1  1  2  0  2  0 	/* RxD5 */
-		1  0  2  0  2  0 	/* RxD6 */
-		1  4  2  0  2  0 	/* RxD7 */
-		0  7  1  0  1  0 	/* TX_EN */
-		0  8  1  0  1  0 	/* TX_ER */
-		0  f  2  0  1  0 	/* RX_DV */
-		0  10 2  0  1  0 	/* RX_ER */
-		0  0  2  0  1  0 	/* RX_CLK */
-		2  9  1  0  3  0 	/* GTX_CLK - CLK10 */
-		2  8  2  0  1  0>;	/* GTX125 - CLK9 */
-     };
-
-