1 files changed, 0 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/usb.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/usb.txt
deleted file mode 100644
index 9ccd5f304..000000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/usb.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Freescale QUICC Engine USB Controller
-
-Required properties:
-- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
-- reg : the first two cells should contain usb registers location and
-  length, the next two two cells should contain PRAM location and
-  length.
-- interrupts : should contain USB interrupt.
-- interrupt-parent : interrupt source phandle.
-- fsl,fullspeed-clock : specifies the full speed USB clock source:
-  "none": clock source is disabled
-  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
-  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
-- fsl,lowspeed-clock : specifies the low speed USB clock source:
-  "none": clock source is disabled
-  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
-  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
-- hub-power-budget : USB power budget for the root hub, in mA.
-- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP,
-  USBRN, SPEED (optional), and POWER (optional).
-
-Example:
-
-usb@6c0 {
-	compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb";
-	reg = <0x6c0 0x40 0x8b00 0x100>;
-	interrupts = <11>;
-	interrupt-parent = <&qeic>;
-	fsl,fullspeed-clock = "clk21";
-	gpios = <&qe_pio_b  2 0 /* USBOE */
-		 &qe_pio_b  3 0 /* USBTP */
-		 &qe_pio_b  8 0 /* USBTN */
-		 &qe_pio_b  9 0 /* USBRP */
-		 &qe_pio_b 11 0 /* USBRN */
-		 &qe_pio_e 20 0 /* SPEED */
-		 &qe_pio_e 21 0 /* POWER */>;
-};