diff options
Diffstat (limited to 'Documentation/rapidio/tsi721.txt')
| -rw-r--r-- | Documentation/rapidio/tsi721.txt | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/Documentation/rapidio/tsi721.txt b/Documentation/rapidio/tsi721.txt index 7c1c7bf48..cd2a2935d 100644 --- a/Documentation/rapidio/tsi721.txt +++ b/Documentation/rapidio/tsi721.txt @@ -25,6 +25,32 @@ fully compatible with RIONET driver (Ethernet over RapidIO messaging services). This parameter can be changed dynamically. Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level. +- 'dma_desc_per_channel' - This parameter defines number of hardware buffer + descriptors allocated for each registered Tsi721 DMA channel. + Its default value is 128. + +- 'dma_txqueue_sz' - DMA transactions queue size. Defines number of pending + transaction requests that can be accepted by each DMA channel. + Default value is 16. + +- 'dma_sel' - DMA channel selection mask. Bitmask that defines which hardware + DMA channels (0 ... 6) will be registered with DmaEngine core. + If bit is set to 1, the corresponding DMA channel will be registered. + DMA channels not selected by this mask will not be used by this device + driver. Default value is 0x7f (use all channels). + +- 'pcie_mrrs' - override value for PCIe Maximum Read Request Size (MRRS). + This parameter gives an ability to override MRRS value set during PCIe + configuration process. Tsi721 supports read request sizes up to 4096B. + Value for this parameter must be set as defined by PCIe specification: + 0 = 128B, 1 = 256B, 2 = 512B, 3 = 1024B, 4 = 2048B and 5 = 4096B. + Default value is '-1' (= keep platform setting). + +- 'mbox_sel' - RIO messaging MBOX selection mask. This is a bitmask that defines + messaging MBOXes are managed by this device driver. Mask bits 0 - 3 + correspond to MBOX0 - MBOX3. MBOX is under driver's control if the + corresponding bit is set to '1'. Default value is 0x0f (= all). + II. Known problems None. |