summaryrefslogtreecommitdiff
path: root/Documentation/video4linux/bttv/README
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/video4linux/bttv/README')
-rw-r--r--Documentation/video4linux/bttv/README86
1 files changed, 86 insertions, 0 deletions
diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README
new file mode 100644
index 000000000..7e9cc0a45
--- /dev/null
+++ b/Documentation/video4linux/bttv/README
@@ -0,0 +1,86 @@
+
+Release notes for bttv
+======================
+
+You'll need at least these config options for bttv:
+ CONFIG_I2C=m
+ CONFIG_I2C_ALGOBIT=m
+ CONFIG_VIDEO_DEV=m
+
+The latest bttv version is available from http://bytesex.org/bttv/
+
+
+Make bttv work with your card
+-----------------------------
+
+Just try "modprobe bttv" and see if that works.
+
+If it doesn't bttv likely could not autodetect your card and needs some
+insmod options. The most important insmod option for bttv is "card=n"
+to select the correct card type. If you get video but no sound you've
+very likely specified the wrong (or no) card type. A list of supported
+cards is in CARDLIST.bttv
+
+If bttv takes very long to load (happens sometimes with the cheap
+cards which have no tuner), try adding this to your modules.conf:
+ options i2c-algo-bit bit_test=1
+
+/*(DEBLOBBED)*/
+
+If your card isn't listed in CARDLIST.bttv or if you have trouble making
+audio work, you should read the Sound-FAQ.
+
+
+Autodetecting cards
+-------------------
+
+bttv uses the PCI Subsystem ID to autodetect the card type. lspci lists
+the Subsystem ID in the second line, looks like this:
+
+00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
+ Subsystem: Hauppauge computer works Inc. WinTV/GO
+ Flags: bus master, medium devsel, latency 32, IRQ 5
+ Memory at e2000000 (32-bit, prefetchable) [size=4K]
+
+only bt878-based cards can have a subsystem ID (which does not mean
+that every card really has one). bt848 cards can't have a Subsystem
+ID and therefore can't be autodetected. There is a list with the ID's
+in bttv-cards.c (in case you are intrested or want to mail patches
+with updates).
+
+
+Still doesn't work?
+-------------------
+
+I do NOT have a lab with 30+ different grabber boards and a
+PAL/NTSC/SECAM test signal generator at home, so I often can't
+reproduce your problems. This makes debugging very difficult for me.
+If you have some knowledge and spare time, please try to fix this
+yourself (patches very welcome of course...) You know: The linux
+slogan is "Do it yourself".
+
+There is a mailing list: linux-media@vger.kernel.org
+http://vger.kernel.org/vger-lists.html#linux-media
+
+If you have trouble with some specific TV card, try to ask there
+instead of mailing me directly. The chance that someone with the
+same card listens there is much higher...
+
+For problems with sound: There are a lot of different systems used
+for TV sound all over the world. And there are also different chips
+which decode the audio signal. Reports about sound problems ("stereo
+does'nt work") are pretty useless unless you include some details
+about your hardware and the TV sound scheme used in your country (or
+at least the country you are living in).
+
+
+Finally: If you mail some patches for bttv around the world (to
+linux-kernel/Alan/Linus/...), please Cc: me.
+
+
+Have fun with bttv,
+
+ Gerd
+
+--
+Gerd Knorr <kraxel@bytesex.org>