summaryrefslogtreecommitdiff
path: root/Documentation/virtual/kvm/api.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/virtual/kvm/api.txt')
-rw-r--r--Documentation/virtual/kvm/api.txt3592
1 files changed, 3592 insertions, 0 deletions
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
new file mode 100644
index 000000000..9fa2bf8c3
--- /dev/null
+++ b/Documentation/virtual/kvm/api.txt
@@ -0,0 +1,3592 @@
+The Definitive KVM (Kernel-based Virtual Machine) API Documentation
+===================================================================
+
+1. General description
+----------------------
+
+The kvm API is a set of ioctls that are issued to control various aspects
+of a virtual machine. The ioctls belong to three classes
+
+ - System ioctls: These query and set global attributes which affect the
+ whole kvm subsystem. In addition a system ioctl is used to create
+ virtual machines
+
+ - VM ioctls: These query and set attributes that affect an entire virtual
+ machine, for example memory layout. In addition a VM ioctl is used to
+ create virtual cpus (vcpus).
+
+ Only run VM ioctls from the same process (address space) that was used
+ to create the VM.
+
+ - vcpu ioctls: These query and set attributes that control the operation
+ of a single virtual cpu.
+
+ Only run vcpu ioctls from the same thread that was used to create the
+ vcpu.
+
+
+2. File descriptors
+-------------------
+
+The kvm API is centered around file descriptors. An initial
+open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
+can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this
+handle will create a VM file descriptor which can be used to issue VM
+ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
+and return a file descriptor pointing to it. Finally, ioctls on a vcpu
+fd can be used to control the vcpu, including the important task of
+actually running guest code.
+
+In general file descriptors can be migrated among processes by means
+of fork() and the SCM_RIGHTS facility of unix domain socket. These
+kinds of tricks are explicitly not supported by kvm. While they will
+not cause harm to the host, their actual behavior is not guaranteed by
+the API. The only supported use is one virtual machine per process,
+and one vcpu per thread.
+
+
+3. Extensions
+-------------
+
+As of Linux 2.6.22, the KVM ABI has been stabilized: no backward
+incompatible change are allowed. However, there is an extension
+facility that allows backward-compatible extensions to the API to be
+queried and used.
+
+The extension mechanism is not based on the Linux version number.
+Instead, kvm defines extension identifiers and a facility to query
+whether a particular extension identifier is available. If it is, a
+set of ioctls is available for application use.
+
+
+4. API description
+------------------
+
+This section describes ioctls that can be used to control kvm guests.
+For each ioctl, the following information is provided along with a
+description:
+
+ Capability: which KVM extension provides this ioctl. Can be 'basic',
+ which means that is will be provided by any kernel that supports
+ API version 12 (see section 4.1), a KVM_CAP_xyz constant, which
+ means availability needs to be checked with KVM_CHECK_EXTENSION
+ (see section 4.4), or 'none' which means that while not all kernels
+ support this ioctl, there's no capability bit to check its
+ availability: for kernels that don't support the ioctl,
+ the ioctl returns -ENOTTY.
+
+ Architectures: which instruction set architectures provide this ioctl.
+ x86 includes both i386 and x86_64.
+
+ Type: system, vm, or vcpu.
+
+ Parameters: what parameters are accepted by the ioctl.
+
+ Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
+ are not detailed, but errors with specific meanings are.
+
+
+4.1 KVM_GET_API_VERSION
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: the constant KVM_API_VERSION (=12)
+
+This identifies the API version as the stable kvm API. It is not
+expected that this number will change. However, Linux 2.6.20 and
+2.6.21 report earlier versions; these are not documented and not
+supported. Applications should refuse to run if KVM_GET_API_VERSION
+returns a value other than 12. If this check passes, all ioctls
+described as 'basic' will be available.
+
+
+4.2 KVM_CREATE_VM
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: machine type identifier (KVM_VM_*)
+Returns: a VM fd that can be used to control the new virtual machine.
+
+The new VM has no virtual cpus and no memory. An mmap() of a VM fd
+will access the virtual machine's physical address space; offset zero
+corresponds to guest physical address zero. Use of mmap() on a VM fd
+is discouraged if userspace memory allocation (KVM_CAP_USER_MEMORY) is
+available.
+You most certainly want to use 0 as machine type.
+
+In order to create user controlled virtual machines on S390, check
+KVM_CAP_S390_UCONTROL and use the flag KVM_VM_S390_UCONTROL as
+privileged user (CAP_SYS_ADMIN).
+
+
+4.3 KVM_GET_MSR_INDEX_LIST
+
+Capability: basic
+Architectures: x86
+Type: system
+Parameters: struct kvm_msr_list (in/out)
+Returns: 0 on success; -1 on error
+Errors:
+ E2BIG: the msr index list is to be to fit in the array specified by
+ the user.
+
+struct kvm_msr_list {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 indices[0];
+};
+
+This ioctl returns the guest msrs that are supported. The list varies
+by kvm version and host processor, but does not change otherwise. The
+user fills in the size of the indices array in nmsrs, and in return
+kvm adjusts nmsrs to reflect the actual number of msrs and fills in
+the indices array with their numbers.
+
+Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
+not returned in the MSR list, as different vcpus can have a different number
+of banks, as set via the KVM_X86_SETUP_MCE ioctl.
+
+
+4.4 KVM_CHECK_EXTENSION
+
+Capability: basic, KVM_CAP_CHECK_EXTENSION_VM for vm ioctl
+Architectures: all
+Type: system ioctl, vm ioctl
+Parameters: extension identifier (KVM_CAP_*)
+Returns: 0 if unsupported; 1 (or some other positive integer) if supported
+
+The API allows the application to query about extensions to the core
+kvm API. Userspace passes an extension identifier (an integer) and
+receives an integer that describes the extension availability.
+Generally 0 means no and 1 means yes, but some extensions may report
+additional information in the integer return value.
+
+Based on their initialization different VMs may have different capabilities.
+It is thus encouraged to use the vm ioctl to query for capabilities (available
+with KVM_CAP_CHECK_EXTENSION_VM on the vm fd)
+
+4.5 KVM_GET_VCPU_MMAP_SIZE
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: size of vcpu mmap area, in bytes
+
+The KVM_RUN ioctl (cf.) communicates with userspace via a shared
+memory region. This ioctl returns the size of that region. See the
+KVM_RUN documentation for details.
+
+
+4.6 KVM_SET_MEMORY_REGION
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_memory_region (in)
+Returns: 0 on success, -1 on error
+
+This ioctl is obsolete and has been removed.
+
+
+4.7 KVM_CREATE_VCPU
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: vcpu id (apic id on x86)
+Returns: vcpu fd on success, -1 on error
+
+This API adds a vcpu to a virtual machine. The vcpu id is a small integer
+in the range [0, max_vcpus).
+
+The recommended max_vcpus value can be retrieved using the KVM_CAP_NR_VCPUS of
+the KVM_CHECK_EXTENSION ioctl() at run-time.
+The maximum possible value for max_vcpus can be retrieved using the
+KVM_CAP_MAX_VCPUS of the KVM_CHECK_EXTENSION ioctl() at run-time.
+
+If the KVM_CAP_NR_VCPUS does not exist, you should assume that max_vcpus is 4
+cpus max.
+If the KVM_CAP_MAX_VCPUS does not exist, you should assume that max_vcpus is
+same as the value returned from KVM_CAP_NR_VCPUS.
+
+On powerpc using book3s_hv mode, the vcpus are mapped onto virtual
+threads in one or more virtual CPU cores. (This is because the
+hardware requires all the hardware threads in a CPU core to be in the
+same partition.) The KVM_CAP_PPC_SMT capability indicates the number
+of vcpus per virtual core (vcore). The vcore id is obtained by
+dividing the vcpu id by the number of vcpus per vcore. The vcpus in a
+given vcore will always be in the same physical core as each other
+(though that might be a different physical core from time to time).
+Userspace can control the threading (SMT) mode of the guest by its
+allocation of vcpu ids. For example, if userspace wants
+single-threaded guest vcpus, it should make all vcpu ids be a multiple
+of the number of vcpus per vcore.
+
+For virtual cpus that have been created with S390 user controlled virtual
+machines, the resulting vcpu fd can be memory mapped at page offset
+KVM_S390_SIE_PAGE_OFFSET in order to obtain a memory map of the virtual
+cpu's hardware control block.
+
+
+4.8 KVM_GET_DIRTY_LOG (vm ioctl)
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_dirty_log (in/out)
+Returns: 0 on success, -1 on error
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+ __u32 slot;
+ __u32 padding;
+ union {
+ void __user *dirty_bitmap; /* one bit per page */
+ __u64 padding;
+ };
+};
+
+Given a memory slot, return a bitmap containing any pages dirtied
+since the last call to this ioctl. Bit 0 is the first page in the
+memory slot. Ensure the entire structure is cleared to avoid padding
+issues.
+
+
+4.9 KVM_SET_MEMORY_ALIAS
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_memory_alias (in)
+Returns: 0 (success), -1 (error)
+
+This ioctl is obsolete and has been removed.
+
+
+4.10 KVM_RUN
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+Errors:
+ EINTR: an unmasked signal is pending
+
+This ioctl is used to run a guest virtual cpu. While there are no
+explicit parameters, there is an implicit parameter block that can be
+obtained by mmap()ing the vcpu fd at offset 0, with the size given by
+KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct
+kvm_run' (see below).
+
+
+4.11 KVM_GET_REGS
+
+Capability: basic
+Architectures: all except ARM, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_regs (out)
+Returns: 0 on success, -1 on error
+
+Reads the general purpose registers from the vcpu.
+
+/* x86 */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 rax, rbx, rcx, rdx;
+ __u64 rsi, rdi, rsp, rbp;
+ __u64 r8, r9, r10, r11;
+ __u64 r12, r13, r14, r15;
+ __u64 rip, rflags;
+};
+
+/* mips */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 gpr[32];
+ __u64 hi;
+ __u64 lo;
+ __u64 pc;
+};
+
+
+4.12 KVM_SET_REGS
+
+Capability: basic
+Architectures: all except ARM, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_regs (in)
+Returns: 0 on success, -1 on error
+
+Writes the general purpose registers into the vcpu.
+
+See KVM_GET_REGS for the data structure.
+
+
+4.13 KVM_GET_SREGS
+
+Capability: basic
+Architectures: x86, ppc
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (out)
+Returns: 0 on success, -1 on error
+
+Reads special registers from the vcpu.
+
+/* x86 */
+struct kvm_sregs {
+ struct kvm_segment cs, ds, es, fs, gs, ss;
+ struct kvm_segment tr, ldt;
+ struct kvm_dtable gdt, idt;
+ __u64 cr0, cr2, cr3, cr4, cr8;
+ __u64 efer;
+ __u64 apic_base;
+ __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+/* ppc -- see arch/powerpc/include/uapi/asm/kvm.h */
+
+interrupt_bitmap is a bitmap of pending external interrupts. At most
+one bit may be set. This interrupt has been acknowledged by the APIC
+but not yet injected into the cpu core.
+
+
+4.14 KVM_SET_SREGS
+
+Capability: basic
+Architectures: x86, ppc
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (in)
+Returns: 0 on success, -1 on error
+
+Writes special registers into the vcpu. See KVM_GET_SREGS for the
+data structures.
+
+
+4.15 KVM_TRANSLATE
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_translation (in/out)
+Returns: 0 on success, -1 on error
+
+Translates a virtual address according to the vcpu's current address
+translation mode.
+
+struct kvm_translation {
+ /* in */
+ __u64 linear_address;
+
+ /* out */
+ __u64 physical_address;
+ __u8 valid;
+ __u8 writeable;
+ __u8 usermode;
+ __u8 pad[5];
+};
+
+
+4.16 KVM_INTERRUPT
+
+Capability: basic
+Architectures: x86, ppc, mips
+Type: vcpu ioctl
+Parameters: struct kvm_interrupt (in)
+Returns: 0 on success, -1 on error
+
+Queues a hardware interrupt vector to be injected. This is only
+useful if in-kernel local APIC or equivalent is not used.
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+ /* in */
+ __u32 irq;
+};
+
+X86:
+
+Note 'irq' is an interrupt vector, not an interrupt pin or line.
+
+PPC:
+
+Queues an external interrupt to be injected. This ioctl is overleaded
+with 3 different irq values:
+
+a) KVM_INTERRUPT_SET
+
+ This injects an edge type external interrupt into the guest once it's ready
+ to receive interrupts. When injected, the interrupt is done.
+
+b) KVM_INTERRUPT_UNSET
+
+ This unsets any pending interrupt.
+
+ Only available with KVM_CAP_PPC_UNSET_IRQ.
+
+c) KVM_INTERRUPT_SET_LEVEL
+
+ This injects a level type external interrupt into the guest context. The
+ interrupt stays pending until a specific ioctl with KVM_INTERRUPT_UNSET
+ is triggered.
+
+ Only available with KVM_CAP_PPC_IRQ_LEVEL.
+
+Note that any value for 'irq' other than the ones stated above is invalid
+and incurs unexpected behavior.
+
+MIPS:
+
+Queues an external interrupt to be injected into the virtual CPU. A negative
+interrupt number dequeues the interrupt.
+
+
+4.17 KVM_DEBUG_GUEST
+
+Capability: basic
+Architectures: none
+Type: vcpu ioctl
+Parameters: none)
+Returns: -1 on error
+
+Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead.
+
+
+4.18 KVM_GET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in/out)
+Returns: 0 on success, -1 on error
+
+Reads model-specific registers from the vcpu. Supported msr indices can
+be obtained using KVM_GET_MSR_INDEX_LIST.
+
+struct kvm_msrs {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 pad;
+
+ struct kvm_msr_entry entries[0];
+};
+
+struct kvm_msr_entry {
+ __u32 index;
+ __u32 reserved;
+ __u64 data;
+};
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array) and the 'index' member of each array entry.
+kvm will fill in the 'data' member.
+
+
+4.19 KVM_SET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in)
+Returns: 0 on success, -1 on error
+
+Writes model-specific registers to the vcpu. See KVM_GET_MSRS for the
+data structures.
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array), and the 'index' and 'data' members of each
+array entry.
+
+
+4.20 KVM_SET_CPUID
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_cpuid (in)
+Returns: 0 on success, -1 on error
+
+Defines the vcpu responses to the cpuid instruction. Applications
+should use the KVM_SET_CPUID2 ioctl if available.
+
+
+struct kvm_cpuid_entry {
+ __u32 function;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry entries[0];
+};
+
+
+4.21 KVM_SET_SIGNAL_MASK
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_signal_mask (in)
+Returns: 0 on success, -1 on error
+
+Defines which signals are blocked during execution of KVM_RUN. This
+signal mask temporarily overrides the threads signal mask. Any
+unblocked signal received (except SIGKILL and SIGSTOP, which retain
+their traditional behaviour) will cause KVM_RUN to return with -EINTR.
+
+Note the signal will only be delivered if not blocked by the original
+signal mask.
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+ __u32 len;
+ __u8 sigset[0];
+};
+
+
+4.22 KVM_GET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (out)
+Returns: 0 on success, -1 on error
+
+Reads the floating point state from the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+
+4.23 KVM_SET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (in)
+Returns: 0 on success, -1 on error
+
+Writes the floating point state to the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+
+4.24 KVM_CREATE_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP, KVM_CAP_S390_IRQCHIP (s390)
+Architectures: x86, ARM, arm64, s390
+Type: vm ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+
+Creates an interrupt controller model in the kernel.
+On x86, creates a virtual ioapic, a virtual PIC (two PICs, nested), and sets up
+future vcpus to have a local APIC. IRQ routing for GSIs 0-15 is set to both
+PIC and IOAPIC; GSI 16-23 only go to the IOAPIC.
+On ARM/arm64, a GICv2 is created. Any other GIC versions require the usage of
+KVM_CREATE_DEVICE, which also supports creating a GICv2. Using
+KVM_CREATE_DEVICE is preferred over KVM_CREATE_IRQCHIP for GICv2.
+On s390, a dummy irq routing table is created.
+
+Note that on s390 the KVM_CAP_S390_IRQCHIP vm capability needs to be enabled
+before KVM_CREATE_IRQCHIP can be used.
+
+
+4.25 KVM_IRQ_LINE
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, arm, arm64
+Type: vm ioctl
+Parameters: struct kvm_irq_level
+Returns: 0 on success, -1 on error
+
+Sets the level of a GSI input to the interrupt controller model in the kernel.
+On some architectures it is required that an interrupt controller model has
+been previously created with KVM_CREATE_IRQCHIP. Note that edge-triggered
+interrupts require the level to be set to 1 and then back to 0.
+
+On real hardware, interrupt pins can be active-low or active-high. This
+does not matter for the level field of struct kvm_irq_level: 1 always
+means active (asserted), 0 means inactive (deasserted).
+
+x86 allows the operating system to program the interrupt polarity
+(active-low/active-high) for level-triggered interrupts, and KVM used
+to consider the polarity. However, due to bitrot in the handling of
+active-low interrupts, the above convention is now valid on x86 too.
+This is signaled by KVM_CAP_X86_IOAPIC_POLARITY_IGNORED. Userspace
+should not present interrupts to the guest as active-low unless this
+capability is present (or unless it is not using the in-kernel irqchip,
+of course).
+
+
+ARM/arm64 can signal an interrupt either at the CPU level, or at the
+in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to
+use PPIs designated for specific cpus. The irq field is interpreted
+like this:
+
+  bits: | 31 ... 24 | 23 ... 16 | 15 ... 0 |
+ field: | irq_type | vcpu_index | irq_id |
+
+The irq_type field has the following values:
+- irq_type[0]: out-of-kernel GIC: irq_id 0 is IRQ, irq_id 1 is FIQ
+- irq_type[1]: in-kernel GIC: SPI, irq_id between 32 and 1019 (incl.)
+ (the vcpu_index field is ignored)
+- irq_type[2]: in-kernel GIC: PPI, irq_id between 16 and 31 (incl.)
+
+(The irq_id field thus corresponds nicely to the IRQ ID in the ARM GIC specs)
+
+In both cases, level is used to assert/deassert the line.
+
+struct kvm_irq_level {
+ union {
+ __u32 irq; /* GSI */
+ __s32 status; /* not used for KVM_IRQ_LEVEL */
+ };
+ __u32 level; /* 0 or 1 */
+};
+
+
+4.26 KVM_GET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in/out)
+Returns: 0 on success, -1 on error
+
+Reads the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP into a buffer provided by the caller.
+
+struct kvm_irqchip {
+ __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+ struct kvm_pic_state pic;
+ struct kvm_ioapic_state ioapic;
+ } chip;
+};
+
+
+4.27 KVM_SET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in)
+Returns: 0 on success, -1 on error
+
+Sets the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP from a buffer provided by the caller.
+
+struct kvm_irqchip {
+ __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+ struct kvm_pic_state pic;
+ struct kvm_ioapic_state ioapic;
+ } chip;
+};
+
+
+4.28 KVM_XEN_HVM_CONFIG
+
+Capability: KVM_CAP_XEN_HVM
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_xen_hvm_config (in)
+Returns: 0 on success, -1 on error
+
+Sets the MSR that the Xen HVM guest uses to initialize its hypercall
+page, and provides the starting address and size of the hypercall
+blobs in userspace. When the guest writes the MSR, kvm copies one
+page of a blob (32- or 64-bit, depending on the vcpu mode) to guest
+memory.
+
+struct kvm_xen_hvm_config {
+ __u32 flags;
+ __u32 msr;
+ __u64 blob_addr_32;
+ __u64 blob_addr_64;
+ __u8 blob_size_32;
+ __u8 blob_size_64;
+ __u8 pad2[30];
+};
+
+
+4.29 KVM_GET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (out)
+Returns: 0 on success, -1 on error
+
+Gets the current timestamp of kvmclock as seen by the current guest. In
+conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+ __u64 clock; /* kvmclock current value */
+ __u32 flags;
+ __u32 pad[9];
+};
+
+
+4.30 KVM_SET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (in)
+Returns: 0 on success, -1 on error
+
+Sets the current timestamp of kvmclock to the value specified in its parameter.
+In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+ __u64 clock; /* kvmclock current value */
+ __u32 flags;
+ __u32 pad[9];
+};
+
+
+4.31 KVM_GET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Extended by: KVM_CAP_INTR_SHADOW
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (out)
+Returns: 0 on success, -1 on error
+
+Gets currently pending exceptions, interrupts, and NMIs as well as related
+states of the vcpu.
+
+struct kvm_vcpu_events {
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 has_error_code;
+ __u8 pad;
+ __u32 error_code;
+ } exception;
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 soft;
+ __u8 shadow;
+ } interrupt;
+ struct {
+ __u8 injected;
+ __u8 pending;
+ __u8 masked;
+ __u8 pad;
+ } nmi;
+ __u32 sipi_vector;
+ __u32 flags;
+};
+
+KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that
+interrupt.shadow contains a valid state. Otherwise, this field is undefined.
+
+
+4.32 KVM_SET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Extended by: KVM_CAP_INTR_SHADOW
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (in)
+Returns: 0 on success, -1 on error
+
+Set pending exceptions, interrupts, and NMIs as well as related states of the
+vcpu.
+
+See KVM_GET_VCPU_EVENTS for the data structure.
+
+Fields that may be modified asynchronously by running VCPUs can be excluded
+from the update. These fields are nmi.pending and sipi_vector. Keep the
+corresponding bits in the flags field cleared to suppress overwriting the
+current in-kernel state. The bits are:
+
+KVM_VCPUEVENT_VALID_NMI_PENDING - transfer nmi.pending to the kernel
+KVM_VCPUEVENT_VALID_SIPI_VECTOR - transfer sipi_vector
+
+If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in
+the flags field to signal that interrupt.shadow contains a valid state and
+shall be written into the VCPU.
+
+
+4.33 KVM_GET_DEBUGREGS
+
+Capability: KVM_CAP_DEBUGREGS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_debugregs (out)
+Returns: 0 on success, -1 on error
+
+Reads debug registers from the vcpu.
+
+struct kvm_debugregs {
+ __u64 db[4];
+ __u64 dr6;
+ __u64 dr7;
+ __u64 flags;
+ __u64 reserved[9];
+};
+
+
+4.34 KVM_SET_DEBUGREGS
+
+Capability: KVM_CAP_DEBUGREGS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_debugregs (in)
+Returns: 0 on success, -1 on error
+
+Writes debug registers into the vcpu.
+
+See KVM_GET_DEBUGREGS for the data structure. The flags field is unused
+yet and must be cleared on entry.
+
+
+4.35 KVM_SET_USER_MEMORY_REGION
+
+Capability: KVM_CAP_USER_MEM
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_userspace_memory_region (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_userspace_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr; /* start of the userspace allocated memory */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0)
+#define KVM_MEM_READONLY (1UL << 1)
+
+This ioctl allows the user to create or modify a guest physical memory
+slot. When changing an existing slot, it may be moved in the guest
+physical memory space, or its flags may be modified. It may not be
+resized. Slots may not overlap in guest physical address space.
+
+Memory for the region is taken starting at the address denoted by the
+field userspace_addr, which must point at user addressable memory for
+the entire memory slot size. Any object may back this memory, including
+anonymous memory, ordinary files, and hugetlbfs.
+
+It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr
+be identical. This allows large pages in the guest to be backed by large
+pages in the host.
+
+The flags field supports two flags: KVM_MEM_LOG_DIRTY_PAGES and
+KVM_MEM_READONLY. The former can be set to instruct KVM to keep track of
+writes to memory within the slot. See KVM_GET_DIRTY_LOG ioctl to know how to
+use it. The latter can be set, if KVM_CAP_READONLY_MEM capability allows it,
+to make a new slot read-only. In this case, writes to this memory will be
+posted to userspace as KVM_EXIT_MMIO exits.
+
+When the KVM_CAP_SYNC_MMU capability is available, changes in the backing of
+the memory region are automatically reflected into the guest. For example, an
+mmap() that affects the region will be made visible immediately. Another
+example is madvise(MADV_DROP).
+
+It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl.
+The KVM_SET_MEMORY_REGION does not allow fine grained control over memory
+allocation and is deprecated.
+
+
+4.36 KVM_SET_TSS_ADDR
+
+Capability: KVM_CAP_SET_TSS_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long tss_address (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a three-page region in the guest
+physical address space. The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address. The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts. This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+
+4.37 KVM_ENABLE_CAP
+
+Capability: KVM_CAP_ENABLE_CAP, KVM_CAP_ENABLE_CAP_VM
+Architectures: ppc, s390
+Type: vcpu ioctl, vm ioctl (with KVM_CAP_ENABLE_CAP_VM)
+Parameters: struct kvm_enable_cap (in)
+Returns: 0 on success; -1 on error
+
++Not all extensions are enabled by default. Using this ioctl the application
+can enable an extension, making it available to the guest.
+
+On systems that do not support this ioctl, it always fails. On systems that
+do support it, it only works for extensions that are supported for enablement.
+
+To check if a capability can be enabled, the KVM_CHECK_EXTENSION ioctl should
+be used.
+
+struct kvm_enable_cap {
+ /* in */
+ __u32 cap;
+
+The capability that is supposed to get enabled.
+
+ __u32 flags;
+
+A bitfield indicating future enhancements. Has to be 0 for now.
+
+ __u64 args[4];
+
+Arguments for enabling a feature. If a feature needs initial values to
+function properly, this is the place to put them.
+
+ __u8 pad[64];
+};
+
+The vcpu ioctl should be used for vcpu-specific capabilities, the vm ioctl
+for vm-wide capabilities.
+
+4.38 KVM_GET_MP_STATE
+
+Capability: KVM_CAP_MP_STATE
+Architectures: x86, s390, arm, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_mp_state (out)
+Returns: 0 on success; -1 on error
+
+struct kvm_mp_state {
+ __u32 mp_state;
+};
+
+Returns the vcpu's current "multiprocessing state" (though also valid on
+uniprocessor guests).
+
+Possible values are:
+
+ - KVM_MP_STATE_RUNNABLE: the vcpu is currently running [x86,arm/arm64]
+ - KVM_MP_STATE_UNINITIALIZED: the vcpu is an application processor (AP)
+ which has not yet received an INIT signal [x86]
+ - KVM_MP_STATE_INIT_RECEIVED: the vcpu has received an INIT signal, and is
+ now ready for a SIPI [x86]
+ - KVM_MP_STATE_HALTED: the vcpu has executed a HLT instruction and
+ is waiting for an interrupt [x86]
+ - KVM_MP_STATE_SIPI_RECEIVED: the vcpu has just received a SIPI (vector
+ accessible via KVM_GET_VCPU_EVENTS) [x86]
+ - KVM_MP_STATE_STOPPED: the vcpu is stopped [s390,arm/arm64]
+ - KVM_MP_STATE_CHECK_STOP: the vcpu is in a special error state [s390]
+ - KVM_MP_STATE_OPERATING: the vcpu is operating (running or halted)
+ [s390]
+ - KVM_MP_STATE_LOAD: the vcpu is in a special load/startup state
+ [s390]
+
+On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
+in-kernel irqchip, the multiprocessing state must be maintained by userspace on
+these architectures.
+
+For arm/arm64:
+
+The only states that are valid are KVM_MP_STATE_STOPPED and
+KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not.
+
+4.39 KVM_SET_MP_STATE
+
+Capability: KVM_CAP_MP_STATE
+Architectures: x86, s390, arm, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_mp_state (in)
+Returns: 0 on success; -1 on error
+
+Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for
+arguments.
+
+On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
+in-kernel irqchip, the multiprocessing state must be maintained by userspace on
+these architectures.
+
+For arm/arm64:
+
+The only states that are valid are KVM_MP_STATE_STOPPED and
+KVM_MP_STATE_RUNNABLE which reflect if the vcpu should be paused or not.
+
+4.40 KVM_SET_IDENTITY_MAP_ADDR
+
+Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long identity (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a one-page region in the guest
+physical address space. The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address. The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts. This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+
+4.41 KVM_SET_BOOT_CPU_ID
+
+Capability: KVM_CAP_SET_BOOT_CPU_ID
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long vcpu_id
+Returns: 0 on success, -1 on error
+
+Define which vcpu is the Bootstrap Processor (BSP). Values are the same
+as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default
+is vcpu 0.
+
+
+4.42 KVM_GET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+This ioctl would copy current vcpu's xsave struct to the userspace.
+
+
+4.43 KVM_SET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+This ioctl would copy userspace's xsave struct to the kernel.
+
+
+4.44 KVM_GET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+This ioctl would copy current vcpu's xcrs to the userspace.
+
+
+4.45 KVM_SET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+This ioctl would set vcpu's xcr to the value userspace specified.
+
+
+4.46 KVM_GET_SUPPORTED_CPUID
+
+Capability: KVM_CAP_EXT_CPUID
+Architectures: x86
+Type: system ioctl
+Parameters: struct kvm_cpuid2 (in/out)
+Returns: 0 on success, -1 on error
+
+struct kvm_cpuid2 {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry2 entries[0];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0)
+#define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1)
+#define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2)
+
+struct kvm_cpuid_entry2 {
+ __u32 function;
+ __u32 index;
+ __u32 flags;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding[3];
+};
+
+This ioctl returns x86 cpuid features which are supported by both the hardware
+and kvm. Userspace can use the information returned by this ioctl to
+construct cpuid information (for KVM_SET_CPUID2) that is consistent with
+hardware, kernel, and userspace capabilities, and with user requirements (for
+example, the user may wish to constrain cpuid to emulate older hardware,
+or for feature consistency across a cluster).
+
+Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure
+with the 'nent' field indicating the number of entries in the variable-size
+array 'entries'. If the number of entries is too low to describe the cpu
+capabilities, an error (E2BIG) is returned. If the number is too high,
+the 'nent' field is adjusted and an error (ENOMEM) is returned. If the
+number is just right, the 'nent' field is adjusted to the number of valid
+entries in the 'entries' array, which is then filled.
+
+The entries returned are the host cpuid as returned by the cpuid instruction,
+with unknown or unsupported features masked out. Some features (for example,
+x2apic), may not be present in the host cpu, but are exposed by kvm if it can
+emulate them efficiently. The fields in each entry are defined as follows:
+
+ function: the eax value used to obtain the entry
+ index: the ecx value used to obtain the entry (for entries that are
+ affected by ecx)
+ flags: an OR of zero or more of the following:
+ KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
+ if the index field is valid
+ KVM_CPUID_FLAG_STATEFUL_FUNC:
+ if cpuid for this function returns different values for successive
+ invocations; there will be several entries with the same function,
+ all with this flag set
+ KVM_CPUID_FLAG_STATE_READ_NEXT:
+ for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
+ the first entry to be read by a cpu
+ eax, ebx, ecx, edx: the values returned by the cpuid instruction for
+ this function/index combination
+
+The TSC deadline timer feature (CPUID leaf 1, ecx[24]) is always returned
+as false, since the feature depends on KVM_CREATE_IRQCHIP for local APIC
+support. Instead it is reported via
+
+ ioctl(KVM_CHECK_EXTENSION, KVM_CAP_TSC_DEADLINE_TIMER)
+
+if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the
+feature in userspace, then you can enable the feature for KVM_SET_CPUID2.
+
+
+4.47 KVM_PPC_GET_PVINFO
+
+Capability: KVM_CAP_PPC_GET_PVINFO
+Architectures: ppc
+Type: vm ioctl
+Parameters: struct kvm_ppc_pvinfo (out)
+Returns: 0 on success, !0 on error
+
+struct kvm_ppc_pvinfo {
+ __u32 flags;
+ __u32 hcall[4];
+ __u8 pad[108];
+};
+
+This ioctl fetches PV specific information that need to be passed to the guest
+using the device tree or other means from vm context.
+
+The hcall array defines 4 instructions that make up a hypercall.
+
+If any additional field gets added to this structure later on, a bit for that
+additional piece of information will be set in the flags bitmap.
+
+The flags bitmap is defined as:
+
+ /* the host supports the ePAPR idle hcall
+ #define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0)
+
+4.48 KVM_ASSIGN_PCI_DEVICE
+
+Capability: none
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Assigns a host PCI device to the VM.
+
+struct kvm_assigned_pci_dev {
+ __u32 assigned_dev_id;
+ __u32 busnr;
+ __u32 devfn;
+ __u32 flags;
+ __u32 segnr;
+ union {
+ __u32 reserved[11];
+ };
+};
+
+The PCI device is specified by the triple segnr, busnr, and devfn.
+Identification in succeeding service requests is done via assigned_dev_id. The
+following flags are specified:
+
+/* Depends on KVM_CAP_IOMMU */
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
+/* The following two depend on KVM_CAP_PCI_2_3 */
+#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
+#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2)
+
+If KVM_DEV_ASSIGN_PCI_2_3 is set, the kernel will manage legacy INTx interrupts
+via the PCI-2.3-compliant device-level mask, thus enable IRQ sharing with other
+assigned devices or host devices. KVM_DEV_ASSIGN_MASK_INTX specifies the
+guest's view on the INTx mask, see KVM_ASSIGN_SET_INTX_MASK for details.
+
+The KVM_DEV_ASSIGN_ENABLE_IOMMU flag is a mandatory option to ensure
+isolation of the device. Usages not specifying this flag are deprecated.
+
+Only PCI header type 0 devices with PCI BAR resources are supported by
+device assignment. The user requesting this ioctl must have read/write
+access to the PCI sysfs resource files associated with the device.
+
+Errors:
+ ENOTTY: kernel does not support this ioctl
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+
+4.49 KVM_DEASSIGN_PCI_DEVICE
+
+Capability: none
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Ends PCI device assignment, releasing all associated resources.
+
+See KVM_ASSIGN_PCI_DEVICE for the data structure. Only assigned_dev_id is
+used in kvm_assigned_pci_dev to identify the device.
+
+Errors:
+ ENOTTY: kernel does not support this ioctl
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+4.50 KVM_ASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Assigns an IRQ to a passed-through device.
+
+struct kvm_assigned_irq {
+ __u32 assigned_dev_id;
+ __u32 host_irq; /* ignored (legacy field) */
+ __u32 guest_irq;
+ __u32 flags;
+ union {
+ __u32 reserved[12];
+ };
+};
+
+The following flags are defined:
+
+#define KVM_DEV_IRQ_HOST_INTX (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10)
+
+It is not valid to specify multiple types per host or guest IRQ. However, the
+IRQ type of host and guest can differ or can even be null.
+
+Errors:
+ ENOTTY: kernel does not support this ioctl
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+
+4.51 KVM_DEASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Ends an IRQ assignment to a passed-through device.
+
+See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
+by assigned_dev_id, flags must correspond to the IRQ type specified on
+KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
+
+
+4.52 KVM_SET_GSI_ROUTING
+
+Capability: KVM_CAP_IRQ_ROUTING
+Architectures: x86 s390
+Type: vm ioctl
+Parameters: struct kvm_irq_routing (in)
+Returns: 0 on success, -1 on error
+
+Sets the GSI routing table entries, overwriting any previously set entries.
+
+struct kvm_irq_routing {
+ __u32 nr;
+ __u32 flags;
+ struct kvm_irq_routing_entry entries[0];
+};
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_entry {
+ __u32 gsi;
+ __u32 type;
+ __u32 flags;
+ __u32 pad;
+ union {
+ struct kvm_irq_routing_irqchip irqchip;
+ struct kvm_irq_routing_msi msi;
+ struct kvm_irq_routing_s390_adapter adapter;
+ __u32 pad[8];
+ } u;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+#define KVM_IRQ_ROUTING_S390_ADAPTER 3
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_irqchip {
+ __u32 irqchip;
+ __u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+ __u32 address_lo;
+ __u32 address_hi;
+ __u32 data;
+ __u32 pad;
+};
+
+struct kvm_irq_routing_s390_adapter {
+ __u64 ind_addr;
+ __u64 summary_addr;
+ __u64 ind_offset;
+ __u32 summary_offset;
+ __u32 adapter_id;
+};
+
+
+4.53 KVM_ASSIGN_SET_MSIX_NR
+
+Capability: none
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_nr (in)
+Returns: 0 on success, -1 on error
+
+Set the number of MSI-X interrupts for an assigned device. The number is
+reset again by terminating the MSI-X assignment of the device via
+KVM_DEASSIGN_DEV_IRQ. Calling this service more than once at any earlier
+point will fail.
+
+struct kvm_assigned_msix_nr {
+ __u32 assigned_dev_id;
+ __u16 entry_nr;
+ __u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV 256
+
+
+4.54 KVM_ASSIGN_SET_MSIX_ENTRY
+
+Capability: none
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_entry (in)
+Returns: 0 on success, -1 on error
+
+Specifies the routing of an MSI-X assigned device interrupt to a GSI. Setting
+the GSI vector to zero means disabling the interrupt.
+
+struct kvm_assigned_msix_entry {
+ __u32 assigned_dev_id;
+ __u32 gsi;
+ __u16 entry; /* The index of entry in the MSI-X table */
+ __u16 padding[3];
+};
+
+Errors:
+ ENOTTY: kernel does not support this ioctl
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+
+4.55 KVM_SET_TSC_KHZ
+
+Capability: KVM_CAP_TSC_CONTROL
+Architectures: x86
+Type: vcpu ioctl
+Parameters: virtual tsc_khz
+Returns: 0 on success, -1 on error
+
+Specifies the tsc frequency for the virtual machine. The unit of the
+frequency is KHz.
+
+
+4.56 KVM_GET_TSC_KHZ
+
+Capability: KVM_CAP_GET_TSC_KHZ
+Architectures: x86
+Type: vcpu ioctl
+Parameters: none
+Returns: virtual tsc-khz on success, negative value on error
+
+Returns the tsc frequency of the guest. The unit of the return value is
+KHz. If the host has unstable tsc this ioctl returns -EIO instead as an
+error.
+
+
+4.57 KVM_GET_LAPIC
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_lapic_state (out)
+Returns: 0 on success, -1 on error
+
+#define KVM_APIC_REG_SIZE 0x400
+struct kvm_lapic_state {
+ char regs[KVM_APIC_REG_SIZE];
+};
+
+Reads the Local APIC registers and copies them into the input argument. The
+data format and layout are the same as documented in the architecture manual.
+
+
+4.58 KVM_SET_LAPIC
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_lapic_state (in)
+Returns: 0 on success, -1 on error
+
+#define KVM_APIC_REG_SIZE 0x400
+struct kvm_lapic_state {
+ char regs[KVM_APIC_REG_SIZE];
+};
+
+Copies the input argument into the Local APIC registers. The data format
+and layout are the same as documented in the architecture manual.
+
+
+4.59 KVM_IOEVENTFD
+
+Capability: KVM_CAP_IOEVENTFD
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_ioeventfd (in)
+Returns: 0 on success, !0 on error
+
+This ioctl attaches or detaches an ioeventfd to a legal pio/mmio address
+within the guest. A guest write in the registered address will signal the
+provided event instead of triggering an exit.
+
+struct kvm_ioeventfd {
+ __u64 datamatch;
+ __u64 addr; /* legal pio/mmio address */
+ __u32 len; /* 1, 2, 4, or 8 bytes */
+ __s32 fd;
+ __u32 flags;
+ __u8 pad[36];
+};
+
+For the special case of virtio-ccw devices on s390, the ioevent is matched
+to a subchannel/virtqueue tuple instead.
+
+The following flags are defined:
+
+#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
+#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio)
+#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign)
+#define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \
+ (1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify)
+
+If datamatch flag is set, the event will be signaled only if the written value
+to the registered address is equal to datamatch in struct kvm_ioeventfd.
+
+For virtio-ccw devices, addr contains the subchannel id and datamatch the
+virtqueue index.
+
+
+4.60 KVM_DIRTY_TLB
+
+Capability: KVM_CAP_SW_TLB
+Architectures: ppc
+Type: vcpu ioctl
+Parameters: struct kvm_dirty_tlb (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_dirty_tlb {
+ __u64 bitmap;
+ __u32 num_dirty;
+};
+
+This must be called whenever userspace has changed an entry in the shared
+TLB, prior to calling KVM_RUN on the associated vcpu.
+
+The "bitmap" field is the userspace address of an array. This array
+consists of a number of bits, equal to the total number of TLB entries as
+determined by the last successful call to KVM_CONFIG_TLB, rounded up to the
+nearest multiple of 64.
+
+Each bit corresponds to one TLB entry, ordered the same as in the shared TLB
+array.
+
+The array is little-endian: the bit 0 is the least significant bit of the
+first byte, bit 8 is the least significant bit of the second byte, etc.
+This avoids any complications with differing word sizes.
+
+The "num_dirty" field is a performance hint for KVM to determine whether it
+should skip processing the bitmap and just invalidate everything. It must
+be set to the number of set bits in the bitmap.
+
+
+4.61 KVM_ASSIGN_SET_INTX_MASK
+
+Capability: KVM_CAP_PCI_2_3
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Allows userspace to mask PCI INTx interrupts from the assigned device. The
+kernel will not deliver INTx interrupts to the guest between setting and
+clearing of KVM_ASSIGN_SET_INTX_MASK via this interface. This enables use of
+and emulation of PCI 2.3 INTx disable command register behavior.
+
+This may be used for both PCI 2.3 devices supporting INTx disable natively and
+older devices lacking this support. Userspace is responsible for emulating the
+read value of the INTx disable bit in the guest visible PCI command register.
+When modifying the INTx disable state, userspace should precede updating the
+physical device command register by calling this ioctl to inform the kernel of
+the new intended INTx mask state.
+
+Note that the kernel uses the device INTx disable bit to internally manage the
+device interrupt state for PCI 2.3 devices. Reads of this register may
+therefore not match the expected value. Writes should always use the guest
+intended INTx disable value rather than attempting to read-copy-update the
+current physical device state. Races between user and kernel updates to the
+INTx disable bit are handled lazily in the kernel. It's possible the device
+may generate unintended interrupts, but they will not be injected into the
+guest.
+
+See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
+by assigned_dev_id. In the flags field, only KVM_DEV_ASSIGN_MASK_INTX is
+evaluated.
+
+
+4.62 KVM_CREATE_SPAPR_TCE
+
+Capability: KVM_CAP_SPAPR_TCE
+Architectures: powerpc
+Type: vm ioctl
+Parameters: struct kvm_create_spapr_tce (in)
+Returns: file descriptor for manipulating the created TCE table
+
+This creates a virtual TCE (translation control entry) table, which
+is an IOMMU for PAPR-style virtual I/O. It is used to translate
+logical addresses used in virtual I/O into guest physical addresses,
+and provides a scatter/gather capability for PAPR virtual I/O.
+
+/* for KVM_CAP_SPAPR_TCE */
+struct kvm_create_spapr_tce {
+ __u64 liobn;
+ __u32 window_size;
+};
+
+The liobn field gives the logical IO bus number for which to create a
+TCE table. The window_size field specifies the size of the DMA window
+which this TCE table will translate - the table will contain one 64
+bit TCE entry for every 4kiB of the DMA window.
+
+When the guest issues an H_PUT_TCE hcall on a liobn for which a TCE
+table has been created using this ioctl(), the kernel will handle it
+in real mode, updating the TCE table. H_PUT_TCE calls for other
+liobns will cause a vm exit and must be handled by userspace.
+
+The return value is a file descriptor which can be passed to mmap(2)
+to map the created TCE table into userspace. This lets userspace read
+the entries written by kernel-handled H_PUT_TCE calls, and also lets
+userspace update the TCE table directly which is useful in some
+circumstances.
+
+
+4.63 KVM_ALLOCATE_RMA
+
+Capability: KVM_CAP_PPC_RMA
+Architectures: powerpc
+Type: vm ioctl
+Parameters: struct kvm_allocate_rma (out)
+Returns: file descriptor for mapping the allocated RMA
+
+This allocates a Real Mode Area (RMA) from the pool allocated at boot
+time by the kernel. An RMA is a physically-contiguous, aligned region
+of memory used on older POWER processors to provide the memory which
+will be accessed by real-mode (MMU off) accesses in a KVM guest.
+POWER processors support a set of sizes for the RMA that usually
+includes 64MB, 128MB, 256MB and some larger powers of two.
+
+/* for KVM_ALLOCATE_RMA */
+struct kvm_allocate_rma {
+ __u64 rma_size;
+};
+
+The return value is a file descriptor which can be passed to mmap(2)
+to map the allocated RMA into userspace. The mapped area can then be
+passed to the KVM_SET_USER_MEMORY_REGION ioctl to establish it as the
+RMA for a virtual machine. The size of the RMA in bytes (which is
+fixed at host kernel boot time) is returned in the rma_size field of
+the argument structure.
+
+The KVM_CAP_PPC_RMA capability is 1 or 2 if the KVM_ALLOCATE_RMA ioctl
+is supported; 2 if the processor requires all virtual machines to have
+an RMA, or 1 if the processor can use an RMA but doesn't require it,
+because it supports the Virtual RMA (VRMA) facility.
+
+
+4.64 KVM_NMI
+
+Capability: KVM_CAP_USER_NMI
+Architectures: x86
+Type: vcpu ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+
+Queues an NMI on the thread's vcpu. Note this is well defined only
+when KVM_CREATE_IRQCHIP has not been called, since this is an interface
+between the virtual cpu core and virtual local APIC. After KVM_CREATE_IRQCHIP
+has been called, this interface is completely emulated within the kernel.
+
+To use this to emulate the LINT1 input with KVM_CREATE_IRQCHIP, use the
+following algorithm:
+
+ - pause the vpcu
+ - read the local APIC's state (KVM_GET_LAPIC)
+ - check whether changing LINT1 will queue an NMI (see the LVT entry for LINT1)
+ - if so, issue KVM_NMI
+ - resume the vcpu
+
+Some guests configure the LINT1 NMI input to cause a panic, aiding in
+debugging.
+
+
+4.65 KVM_S390_UCAS_MAP
+
+Capability: KVM_CAP_S390_UCONTROL
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_ucas_mapping (in)
+Returns: 0 in case of success
+
+The parameter is defined like this:
+ struct kvm_s390_ucas_mapping {
+ __u64 user_addr;
+ __u64 vcpu_addr;
+ __u64 length;
+ };
+
+This ioctl maps the memory at "user_addr" with the length "length" to
+the vcpu's address space starting at "vcpu_addr". All parameters need to
+be aligned by 1 megabyte.
+
+
+4.66 KVM_S390_UCAS_UNMAP
+
+Capability: KVM_CAP_S390_UCONTROL
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_ucas_mapping (in)
+Returns: 0 in case of success
+
+The parameter is defined like this:
+ struct kvm_s390_ucas_mapping {
+ __u64 user_addr;
+ __u64 vcpu_addr;
+ __u64 length;
+ };
+
+This ioctl unmaps the memory in the vcpu's address space starting at
+"vcpu_addr" with the length "length". The field "user_addr" is ignored.
+All parameters need to be aligned by 1 megabyte.
+
+
+4.67 KVM_S390_VCPU_FAULT
+
+Capability: KVM_CAP_S390_UCONTROL
+Architectures: s390
+Type: vcpu ioctl
+Parameters: vcpu absolute address (in)
+Returns: 0 in case of success
+
+This call creates a page table entry on the virtual cpu's address space
+(for user controlled virtual machines) or the virtual machine's address
+space (for regular virtual machines). This only works for minor faults,
+thus it's recommended to access subject memory page via the user page
+table upfront. This is useful to handle validity intercepts for user
+controlled virtual machines to fault in the virtual cpu's lowcore pages
+prior to calling the KVM_RUN ioctl.
+
+
+4.68 KVM_SET_ONE_REG
+
+Capability: KVM_CAP_ONE_REG
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_one_reg (in)
+Returns: 0 on success, negative value on failure
+
+struct kvm_one_reg {
+ __u64 id;
+ __u64 addr;
+};
+
+Using this ioctl, a single vcpu register can be set to a specific value
+defined by user space with the passed in struct kvm_one_reg, where id
+refers to the register identifier as described below and addr is a pointer
+to a variable with the respective size. There can be architecture agnostic
+and architecture specific registers. Each have their own range of operation
+and their own constants and width. To keep track of the implemented
+registers, find a list below:
+
+ Arch | Register | Width (bits)
+ | |
+ PPC | KVM_REG_PPC_HIOR | 64
+ PPC | KVM_REG_PPC_IAC1 | 64
+ PPC | KVM_REG_PPC_IAC2 | 64
+ PPC | KVM_REG_PPC_IAC3 | 64
+ PPC | KVM_REG_PPC_IAC4 | 64
+ PPC | KVM_REG_PPC_DAC1 | 64
+ PPC | KVM_REG_PPC_DAC2 | 64
+ PPC | KVM_REG_PPC_DABR | 64
+ PPC | KVM_REG_PPC_DSCR | 64
+ PPC | KVM_REG_PPC_PURR | 64
+ PPC | KVM_REG_PPC_SPURR | 64
+ PPC | KVM_REG_PPC_DAR | 64
+ PPC | KVM_REG_PPC_DSISR | 32
+ PPC | KVM_REG_PPC_AMR | 64
+ PPC | KVM_REG_PPC_UAMOR | 64
+ PPC | KVM_REG_PPC_MMCR0 | 64
+ PPC | KVM_REG_PPC_MMCR1 | 64
+ PPC | KVM_REG_PPC_MMCRA | 64
+ PPC | KVM_REG_PPC_MMCR2 | 64
+ PPC | KVM_REG_PPC_MMCRS | 64
+ PPC | KVM_REG_PPC_SIAR | 64
+ PPC | KVM_REG_PPC_SDAR | 64
+ PPC | KVM_REG_PPC_SIER | 64
+ PPC | KVM_REG_PPC_PMC1 | 32
+ PPC | KVM_REG_PPC_PMC2 | 32
+ PPC | KVM_REG_PPC_PMC3 | 32
+ PPC | KVM_REG_PPC_PMC4 | 32
+ PPC | KVM_REG_PPC_PMC5 | 32
+ PPC | KVM_REG_PPC_PMC6 | 32
+ PPC | KVM_REG_PPC_PMC7 | 32
+ PPC | KVM_REG_PPC_PMC8 | 32
+ PPC | KVM_REG_PPC_FPR0 | 64
+ ...
+ PPC | KVM_REG_PPC_FPR31 | 64
+ PPC | KVM_REG_PPC_VR0 | 128
+ ...
+ PPC | KVM_REG_PPC_VR31 | 128
+ PPC | KVM_REG_PPC_VSR0 | 128
+ ...
+ PPC | KVM_REG_PPC_VSR31 | 128
+ PPC | KVM_REG_PPC_FPSCR | 64
+ PPC | KVM_REG_PPC_VSCR | 32
+ PPC | KVM_REG_PPC_VPA_ADDR | 64
+ PPC | KVM_REG_PPC_VPA_SLB | 128
+ PPC | KVM_REG_PPC_VPA_DTL | 128
+ PPC | KVM_REG_PPC_EPCR | 32
+ PPC | KVM_REG_PPC_EPR | 32
+ PPC | KVM_REG_PPC_TCR | 32
+ PPC | KVM_REG_PPC_TSR | 32
+ PPC | KVM_REG_PPC_OR_TSR | 32
+ PPC | KVM_REG_PPC_CLEAR_TSR | 32
+ PPC | KVM_REG_PPC_MAS0 | 32
+ PPC | KVM_REG_PPC_MAS1 | 32
+ PPC | KVM_REG_PPC_MAS2 | 64
+ PPC | KVM_REG_PPC_MAS7_3 | 64
+ PPC | KVM_REG_PPC_MAS4 | 32
+ PPC | KVM_REG_PPC_MAS6 | 32
+ PPC | KVM_REG_PPC_MMUCFG | 32
+ PPC | KVM_REG_PPC_TLB0CFG | 32
+ PPC | KVM_REG_PPC_TLB1CFG | 32
+ PPC | KVM_REG_PPC_TLB2CFG | 32
+ PPC | KVM_REG_PPC_TLB3CFG | 32
+ PPC | KVM_REG_PPC_TLB0PS | 32
+ PPC | KVM_REG_PPC_TLB1PS | 32
+ PPC | KVM_REG_PPC_TLB2PS | 32
+ PPC | KVM_REG_PPC_TLB3PS | 32
+ PPC | KVM_REG_PPC_EPTCFG | 32
+ PPC | KVM_REG_PPC_ICP_STATE | 64
+ PPC | KVM_REG_PPC_TB_OFFSET | 64
+ PPC | KVM_REG_PPC_SPMC1 | 32
+ PPC | KVM_REG_PPC_SPMC2 | 32
+ PPC | KVM_REG_PPC_IAMR | 64
+ PPC | KVM_REG_PPC_TFHAR | 64
+ PPC | KVM_REG_PPC_TFIAR | 64
+ PPC | KVM_REG_PPC_TEXASR | 64
+ PPC | KVM_REG_PPC_FSCR | 64
+ PPC | KVM_REG_PPC_PSPB | 32
+ PPC | KVM_REG_PPC_EBBHR | 64
+ PPC | KVM_REG_PPC_EBBRR | 64
+ PPC | KVM_REG_PPC_BESCR | 64
+ PPC | KVM_REG_PPC_TAR | 64
+ PPC | KVM_REG_PPC_DPDES | 64
+ PPC | KVM_REG_PPC_DAWR | 64
+ PPC | KVM_REG_PPC_DAWRX | 64
+ PPC | KVM_REG_PPC_CIABR | 64
+ PPC | KVM_REG_PPC_IC | 64
+ PPC | KVM_REG_PPC_VTB | 64
+ PPC | KVM_REG_PPC_CSIGR | 64
+ PPC | KVM_REG_PPC_TACR | 64
+ PPC | KVM_REG_PPC_TCSCR | 64
+ PPC | KVM_REG_PPC_PID | 64
+ PPC | KVM_REG_PPC_ACOP | 64
+ PPC | KVM_REG_PPC_VRSAVE | 32
+ PPC | KVM_REG_PPC_LPCR | 32
+ PPC | KVM_REG_PPC_LPCR_64 | 64
+ PPC | KVM_REG_PPC_PPR | 64
+ PPC | KVM_REG_PPC_ARCH_COMPAT | 32
+ PPC | KVM_REG_PPC_DABRX | 32
+ PPC | KVM_REG_PPC_WORT | 64
+ PPC | KVM_REG_PPC_SPRG9 | 64
+ PPC | KVM_REG_PPC_DBSR | 32
+ PPC | KVM_REG_PPC_TM_GPR0 | 64
+ ...
+ PPC | KVM_REG_PPC_TM_GPR31 | 64
+ PPC | KVM_REG_PPC_TM_VSR0 | 128
+ ...
+ PPC | KVM_REG_PPC_TM_VSR63 | 128
+ PPC | KVM_REG_PPC_TM_CR | 64
+ PPC | KVM_REG_PPC_TM_LR | 64
+ PPC | KVM_REG_PPC_TM_CTR | 64
+ PPC | KVM_REG_PPC_TM_FPSCR | 64
+ PPC | KVM_REG_PPC_TM_AMR | 64
+ PPC | KVM_REG_PPC_TM_PPR | 64
+ PPC | KVM_REG_PPC_TM_VRSAVE | 64
+ PPC | KVM_REG_PPC_TM_VSCR | 32
+ PPC | KVM_REG_PPC_TM_DSCR | 64
+ PPC | KVM_REG_PPC_TM_TAR | 64
+ | |
+ MIPS | KVM_REG_MIPS_R0 | 64
+ ...
+ MIPS | KVM_REG_MIPS_R31 | 64
+ MIPS | KVM_REG_MIPS_HI | 64
+ MIPS | KVM_REG_MIPS_LO | 64
+ MIPS | KVM_REG_MIPS_PC | 64
+ MIPS | KVM_REG_MIPS_CP0_INDEX | 32
+ MIPS | KVM_REG_MIPS_CP0_CONTEXT | 64
+ MIPS | KVM_REG_MIPS_CP0_USERLOCAL | 64
+ MIPS | KVM_REG_MIPS_CP0_PAGEMASK | 32
+ MIPS | KVM_REG_MIPS_CP0_WIRED | 32
+ MIPS | KVM_REG_MIPS_CP0_HWRENA | 32
+ MIPS | KVM_REG_MIPS_CP0_BADVADDR | 64
+ MIPS | KVM_REG_MIPS_CP0_COUNT | 32
+ MIPS | KVM_REG_MIPS_CP0_ENTRYHI | 64
+ MIPS | KVM_REG_MIPS_CP0_COMPARE | 32
+ MIPS | KVM_REG_MIPS_CP0_STATUS | 32
+ MIPS | KVM_REG_MIPS_CP0_CAUSE | 32
+ MIPS | KVM_REG_MIPS_CP0_EPC | 64
+ MIPS | KVM_REG_MIPS_CP0_PRID | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG1 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG2 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG3 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG4 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG5 | 32
+ MIPS | KVM_REG_MIPS_CP0_CONFIG7 | 32
+ MIPS | KVM_REG_MIPS_CP0_ERROREPC | 64
+ MIPS | KVM_REG_MIPS_COUNT_CTL | 64
+ MIPS | KVM_REG_MIPS_COUNT_RESUME | 64
+ MIPS | KVM_REG_MIPS_COUNT_HZ | 64
+ MIPS | KVM_REG_MIPS_FPR_32(0..31) | 32
+ MIPS | KVM_REG_MIPS_FPR_64(0..31) | 64
+ MIPS | KVM_REG_MIPS_VEC_128(0..31) | 128
+ MIPS | KVM_REG_MIPS_FCR_IR | 32
+ MIPS | KVM_REG_MIPS_FCR_CSR | 32
+ MIPS | KVM_REG_MIPS_MSA_IR | 32
+ MIPS | KVM_REG_MIPS_MSA_CSR | 32
+
+ARM registers are mapped using the lower 32 bits. The upper 16 of that
+is the register group type, or coprocessor number:
+
+ARM core registers have the following id bit patterns:
+ 0x4020 0000 0010 <index into the kvm_regs struct:16>
+
+ARM 32-bit CP15 registers have the following id bit patterns:
+ 0x4020 0000 000F <zero:1> <crn:4> <crm:4> <opc1:4> <opc2:3>
+
+ARM 64-bit CP15 registers have the following id bit patterns:
+ 0x4030 0000 000F <zero:1> <zero:4> <crm:4> <opc1:4> <zero:3>
+
+ARM CCSIDR registers are demultiplexed by CSSELR value:
+ 0x4020 0000 0011 00 <csselr:8>
+
+ARM 32-bit VFP control registers have the following id bit patterns:
+ 0x4020 0000 0012 1 <regno:12>
+
+ARM 64-bit FP registers have the following id bit patterns:
+ 0x4030 0000 0012 0 <regno:12>
+
+
+arm64 registers are mapped using the lower 32 bits. The upper 16 of
+that is the register group type, or coprocessor number:
+
+arm64 core/FP-SIMD registers have the following id bit patterns. Note
+that the size of the access is variable, as the kvm_regs structure
+contains elements ranging from 32 to 128 bits. The index is a 32bit
+value in the kvm_regs structure seen as a 32bit array.
+ 0x60x0 0000 0010 <index into the kvm_regs struct:16>
+
+arm64 CCSIDR registers are demultiplexed by CSSELR value:
+ 0x6020 0000 0011 00 <csselr:8>
+
+arm64 system registers have the following id bit patterns:
+ 0x6030 0000 0013 <op0:2> <op1:3> <crn:4> <crm:4> <op2:3>
+
+
+MIPS registers are mapped using the lower 32 bits. The upper 16 of that is
+the register group type:
+
+MIPS core registers (see above) have the following id bit patterns:
+ 0x7030 0000 0000 <reg:16>
+
+MIPS CP0 registers (see KVM_REG_MIPS_CP0_* above) have the following id bit
+patterns depending on whether they're 32-bit or 64-bit registers:
+ 0x7020 0000 0001 00 <reg:5> <sel:3> (32-bit)
+ 0x7030 0000 0001 00 <reg:5> <sel:3> (64-bit)
+
+MIPS KVM control registers (see above) have the following id bit patterns:
+ 0x7030 0000 0002 <reg:16>
+
+MIPS FPU registers (see KVM_REG_MIPS_FPR_{32,64}() above) have the following
+id bit patterns depending on the size of the register being accessed. They are
+always accessed according to the current guest FPU mode (Status.FR and
+Config5.FRE), i.e. as the guest would see them, and they become unpredictable
+if the guest FPU mode is changed. MIPS SIMD Architecture (MSA) vector
+registers (see KVM_REG_MIPS_VEC_128() above) have similar patterns as they
+overlap the FPU registers:
+ 0x7020 0000 0003 00 <0:3> <reg:5> (32-bit FPU registers)
+ 0x7030 0000 0003 00 <0:3> <reg:5> (64-bit FPU registers)
+ 0x7040 0000 0003 00 <0:3> <reg:5> (128-bit MSA vector registers)
+
+MIPS FPU control registers (see KVM_REG_MIPS_FCR_{IR,CSR} above) have the
+following id bit patterns:
+ 0x7020 0000 0003 01 <0:3> <reg:5>
+
+MIPS MSA control registers (see KVM_REG_MIPS_MSA_{IR,CSR} above) have the
+following id bit patterns:
+ 0x7020 0000 0003 02 <0:3> <reg:5>
+
+
+4.69 KVM_GET_ONE_REG
+
+Capability: KVM_CAP_ONE_REG
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_one_reg (in and out)
+Returns: 0 on success, negative value on failure
+
+This ioctl allows to receive the value of a single register implemented
+in a vcpu. The register to read is indicated by the "id" field of the
+kvm_one_reg struct passed in. On success, the register value can be found
+at the memory location pointed to by "addr".
+
+The list of registers accessible using this interface is identical to the
+list in 4.68.
+
+
+4.70 KVM_KVMCLOCK_CTRL
+
+Capability: KVM_CAP_KVMCLOCK_CTRL
+Architectures: Any that implement pvclocks (currently x86 only)
+Type: vcpu ioctl
+Parameters: None
+Returns: 0 on success, -1 on error
+
+This signals to the host kernel that the specified guest is being paused by
+userspace. The host will set a flag in the pvclock structure that is checked
+from the soft lockup watchdog. The flag is part of the pvclock structure that
+is shared between guest and host, specifically the second bit of the flags
+field of the pvclock_vcpu_time_info structure. It will be set exclusively by
+the host and read/cleared exclusively by the guest. The guest operation of
+checking and clearing the flag must an atomic operation so
+load-link/store-conditional, or equivalent must be used. There are two cases
+where the guest will clear the flag: when the soft lockup watchdog timer resets
+itself or when a soft lockup is detected. This ioctl can be called any time
+after pausing the vcpu, but before it is resumed.
+
+
+4.71 KVM_SIGNAL_MSI
+
+Capability: KVM_CAP_SIGNAL_MSI
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_msi (in)
+Returns: >0 on delivery, 0 if guest blocked the MSI, and -1 on error
+
+Directly inject a MSI message. Only valid with in-kernel irqchip that handles
+MSI messages.
+
+struct kvm_msi {
+ __u32 address_lo;
+ __u32 address_hi;
+ __u32 data;
+ __u32 flags;
+ __u8 pad[16];
+};
+
+No flags are defined so far. The corresponding field must be 0.
+
+
+4.71 KVM_CREATE_PIT2
+
+Capability: KVM_CAP_PIT2
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_pit_config (in)
+Returns: 0 on success, -1 on error
+
+Creates an in-kernel device model for the i8254 PIT. This call is only valid
+after enabling in-kernel irqchip support via KVM_CREATE_IRQCHIP. The following
+parameters have to be passed:
+
+struct kvm_pit_config {
+ __u32 flags;
+ __u32 pad[15];
+};
+
+Valid flags are:
+
+#define KVM_PIT_SPEAKER_DUMMY 1 /* emulate speaker port stub */
+
+PIT timer interrupts may use a per-VM kernel thread for injection. If it
+exists, this thread will have a name of the following pattern:
+
+kvm-pit/<owner-process-pid>
+
+When running a guest with elevated priorities, the scheduling parameters of
+this thread may have to be adjusted accordingly.
+
+This IOCTL replaces the obsolete KVM_CREATE_PIT.
+
+
+4.72 KVM_GET_PIT2
+
+Capability: KVM_CAP_PIT_STATE2
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_pit_state2 (out)
+Returns: 0 on success, -1 on error
+
+Retrieves the state of the in-kernel PIT model. Only valid after
+KVM_CREATE_PIT2. The state is returned in the following structure:
+
+struct kvm_pit_state2 {
+ struct kvm_pit_channel_state channels[3];
+ __u32 flags;
+ __u32 reserved[9];
+};
+
+Valid flags are:
+
+/* disable PIT in HPET legacy mode */
+#define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001
+
+This IOCTL replaces the obsolete KVM_GET_PIT.
+
+
+4.73 KVM_SET_PIT2
+
+Capability: KVM_CAP_PIT_STATE2
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_pit_state2 (in)
+Returns: 0 on success, -1 on error
+
+Sets the state of the in-kernel PIT model. Only valid after KVM_CREATE_PIT2.
+See KVM_GET_PIT2 for details on struct kvm_pit_state2.
+
+This IOCTL replaces the obsolete KVM_SET_PIT.
+
+
+4.74 KVM_PPC_GET_SMMU_INFO
+
+Capability: KVM_CAP_PPC_GET_SMMU_INFO
+Architectures: powerpc
+Type: vm ioctl
+Parameters: None
+Returns: 0 on success, -1 on error
+
+This populates and returns a structure describing the features of
+the "Server" class MMU emulation supported by KVM.
+This can in turn be used by userspace to generate the appropriate
+device-tree properties for the guest operating system.
+
+The structure contains some global information, followed by an
+array of supported segment page sizes:
+
+ struct kvm_ppc_smmu_info {
+ __u64 flags;
+ __u32 slb_size;
+ __u32 pad;
+ struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
+ };
+
+The supported flags are:
+
+ - KVM_PPC_PAGE_SIZES_REAL:
+ When that flag is set, guest page sizes must "fit" the backing
+ store page sizes. When not set, any page size in the list can
+ be used regardless of how they are backed by userspace.
+
+ - KVM_PPC_1T_SEGMENTS
+ The emulated MMU supports 1T segments in addition to the
+ standard 256M ones.
+
+The "slb_size" field indicates how many SLB entries are supported
+
+The "sps" array contains 8 entries indicating the supported base
+page sizes for a segment in increasing order. Each entry is defined
+as follow:
+
+ struct kvm_ppc_one_seg_page_size {
+ __u32 page_shift; /* Base page shift of segment (or 0) */
+ __u32 slb_enc; /* SLB encoding for BookS */
+ struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ];
+ };
+
+An entry with a "page_shift" of 0 is unused. Because the array is
+organized in increasing order, a lookup can stop when encoutering
+such an entry.
+
+The "slb_enc" field provides the encoding to use in the SLB for the
+page size. The bits are in positions such as the value can directly
+be OR'ed into the "vsid" argument of the slbmte instruction.
+
+The "enc" array is a list which for each of those segment base page
+size provides the list of supported actual page sizes (which can be
+only larger or equal to the base page size), along with the
+corresponding encoding in the hash PTE. Similarly, the array is
+8 entries sorted by increasing sizes and an entry with a "0" shift
+is an empty entry and a terminator:
+
+ struct kvm_ppc_one_page_size {
+ __u32 page_shift; /* Page shift (or 0) */
+ __u32 pte_enc; /* Encoding in the HPTE (>>12) */
+ };
+
+The "pte_enc" field provides a value that can OR'ed into the hash
+PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
+into the hash PTE second double word).
+
+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86 s390 arm arm64
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When
+an event is triggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin. The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+With KVM_CAP_IRQFD_RESAMPLE, KVM_IRQFD supports a de-assert and notify
+mechanism allowing emulation of level-triggered, irqfd-based
+interrupts. When KVM_IRQFD_FLAG_RESAMPLE is set the user must pass an
+additional eventfd in the kvm_irqfd.resamplefd field. When operating
+in resample mode, posting of an interrupt through kvm_irq.fd asserts
+the specified gsi in the irqchip. When the irqchip is resampled, such
+as from an EOI, the gsi is de-asserted and the user is notified via
+kvm_irqfd.resamplefd. It is the user's responsibility to re-queue
+the interrupt if the device making use of it still requires service.
+Note that closing the resamplefd is not sufficient to disable the
+irqfd. The KVM_IRQFD_FLAG_RESAMPLE is only necessary on assignment
+and need not be specified with KVM_IRQFD_FLAG_DEASSIGN.
+
+On ARM/ARM64, the gsi field in the kvm_irqfd struct specifies the Shared
+Peripheral Interrupt (SPI) index, such that the GIC interrupt ID is
+given by gsi + 32.
+
+4.76 KVM_PPC_ALLOCATE_HTAB
+
+Capability: KVM_CAP_PPC_ALLOC_HTAB
+Architectures: powerpc
+Type: vm ioctl
+Parameters: Pointer to u32 containing hash table order (in/out)
+Returns: 0 on success, -1 on error
+
+This requests the host kernel to allocate an MMU hash table for a
+guest using the PAPR paravirtualization interface. This only does
+anything if the kernel is configured to use the Book 3S HV style of
+virtualization. Otherwise the capability doesn't exist and the ioctl
+returns an ENOTTY error. The rest of this description assumes Book 3S
+HV.
+
+There must be no vcpus running when this ioctl is called; if there
+are, it will do nothing and return an EBUSY error.
+
+The parameter is a pointer to a 32-bit unsigned integer variable
+containing the order (log base 2) of the desired size of the hash
+table, which must be between 18 and 46. On successful return from the
+ioctl, it will have been updated with the order of the hash table that
+was allocated.
+
+If no hash table has been allocated when any vcpu is asked to run
+(with the KVM_RUN ioctl), the host kernel will allocate a
+default-sized hash table (16 MB).
+
+If this ioctl is called when a hash table has already been allocated,
+the kernel will clear out the existing hash table (zero all HPTEs) and
+return the hash table order in the parameter. (If the guest is using
+the virtualized real-mode area (VRMA) facility, the kernel will
+re-create the VMRA HPTEs on the next KVM_RUN of any vcpu.)
+
+4.77 KVM_S390_INTERRUPT
+
+Capability: basic
+Architectures: s390
+Type: vm ioctl, vcpu ioctl
+Parameters: struct kvm_s390_interrupt (in)
+Returns: 0 on success, -1 on error
+
+Allows to inject an interrupt to the guest. Interrupts can be floating
+(vm ioctl) or per cpu (vcpu ioctl), depending on the interrupt type.
+
+Interrupt parameters are passed via kvm_s390_interrupt:
+
+struct kvm_s390_interrupt {
+ __u32 type;
+ __u32 parm;
+ __u64 parm64;
+};
+
+type can be one of the following:
+
+KVM_S390_SIGP_STOP (vcpu) - sigp stop; optional flags in parm
+KVM_S390_PROGRAM_INT (vcpu) - program check; code in parm
+KVM_S390_SIGP_SET_PREFIX (vcpu) - sigp set prefix; prefix address in parm
+KVM_S390_RESTART (vcpu) - restart
+KVM_S390_INT_CLOCK_COMP (vcpu) - clock comparator interrupt
+KVM_S390_INT_CPU_TIMER (vcpu) - CPU timer interrupt
+KVM_S390_INT_VIRTIO (vm) - virtio external interrupt; external interrupt
+ parameters in parm and parm64
+KVM_S390_INT_SERVICE (vm) - sclp external interrupt; sclp parameter in parm
+KVM_S390_INT_EMERGENCY (vcpu) - sigp emergency; source cpu in parm
+KVM_S390_INT_EXTERNAL_CALL (vcpu) - sigp external call; source cpu in parm
+KVM_S390_INT_IO(ai,cssid,ssid,schid) (vm) - compound value to indicate an
+ I/O interrupt (ai - adapter interrupt; cssid,ssid,schid - subchannel);
+ I/O interruption parameters in parm (subchannel) and parm64 (intparm,
+ interruption subclass)
+KVM_S390_MCHK (vm, vcpu) - machine check interrupt; cr 14 bits in parm,
+ machine check interrupt code in parm64 (note that
+ machine checks needing further payload are not
+ supported by this ioctl)
+
+Note that the vcpu ioctl is asynchronous to vcpu execution.
+
+4.78 KVM_PPC_GET_HTAB_FD
+
+Capability: KVM_CAP_PPC_HTAB_FD
+Architectures: powerpc
+Type: vm ioctl
+Parameters: Pointer to struct kvm_get_htab_fd (in)
+Returns: file descriptor number (>= 0) on success, -1 on error
+
+This returns a file descriptor that can be used either to read out the
+entries in the guest's hashed page table (HPT), or to write entries to
+initialize the HPT. The returned fd can only be written to if the
+KVM_GET_HTAB_WRITE bit is set in the flags field of the argument, and
+can only be read if that bit is clear. The argument struct looks like
+this:
+
+/* For KVM_PPC_GET_HTAB_FD */
+struct kvm_get_htab_fd {
+ __u64 flags;
+ __u64 start_index;
+ __u64 reserved[2];
+};
+
+/* Values for kvm_get_htab_fd.flags */
+#define KVM_GET_HTAB_BOLTED_ONLY ((__u64)0x1)
+#define KVM_GET_HTAB_WRITE ((__u64)0x2)
+
+The `start_index' field gives the index in the HPT of the entry at
+which to start reading. It is ignored when writing.
+
+Reads on the fd will initially supply information about all
+"interesting" HPT entries. Interesting entries are those with the
+bolted bit set, if the KVM_GET_HTAB_BOLTED_ONLY bit is set, otherwise
+all entries. When the end of the HPT is reached, the read() will
+return. If read() is called again on the fd, it will start again from
+the beginning of the HPT, but will only return HPT entries that have
+changed since they were last read.
+
+Data read or written is structured as a header (8 bytes) followed by a
+series of valid HPT entries (16 bytes) each. The header indicates how
+many valid HPT entries there are and how many invalid entries follow
+the valid entries. The invalid entries are not represented explicitly
+in the stream. The header format is:
+
+struct kvm_get_htab_header {
+ __u32 index;
+ __u16 n_valid;
+ __u16 n_invalid;
+};
+
+Writes to the fd create HPT entries starting at the index given in the
+header; first `n_valid' valid entries with contents from the data
+written, then `n_invalid' invalid entries, invalidating any previously
+valid entries found.
+
+4.79 KVM_CREATE_DEVICE
+
+Capability: KVM_CAP_DEVICE_CTRL
+Type: vm ioctl
+Parameters: struct kvm_create_device (in/out)
+Returns: 0 on success, -1 on error
+Errors:
+ ENODEV: The device type is unknown or unsupported
+ EEXIST: Device already created, and this type of device may not
+ be instantiated multiple times
+
+ Other error conditions may be defined by individual device types or
+ have their standard meanings.
+
+Creates an emulated device in the kernel. The file descriptor returned
+in fd can be used with KVM_SET/GET/HAS_DEVICE_ATTR.
+
+If the KVM_CREATE_DEVICE_TEST flag is set, only test whether the
+device type is supported (not necessarily whether it can be created
+in the current vm).
+
+Individual devices should not define flags. Attributes should be used
+for specifying any behavior that is not implied by the device type
+number.
+
+struct kvm_create_device {
+ __u32 type; /* in: KVM_DEV_TYPE_xxx */
+ __u32 fd; /* out: device handle */
+ __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */
+};
+
+4.80 KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR
+
+Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device
+Type: device ioctl, vm ioctl
+Parameters: struct kvm_device_attr
+Returns: 0 on success, -1 on error
+Errors:
+ ENXIO: The group or attribute is unknown/unsupported for this device
+ EPERM: The attribute cannot (currently) be accessed this way
+ (e.g. read-only attribute, or attribute that only makes
+ sense when the device is in a different state)
+
+ Other error conditions may be defined by individual device types.
+
+Gets/sets a specified piece of device configuration and/or state. The
+semantics are device-specific. See individual device documentation in
+the "devices" directory. As with ONE_REG, the size of the data
+transferred is defined by the particular attribute.
+
+struct kvm_device_attr {
+ __u32 flags; /* no flags currently defined */
+ __u32 group; /* device-defined */
+ __u64 attr; /* group-defined */
+ __u64 addr; /* userspace address of attr data */
+};
+
+4.81 KVM_HAS_DEVICE_ATTR
+
+Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device
+Type: device ioctl, vm ioctl
+Parameters: struct kvm_device_attr
+Returns: 0 on success, -1 on error
+Errors:
+ ENXIO: The group or attribute is unknown/unsupported for this device
+
+Tests whether a device supports a particular attribute. A successful
+return indicates the attribute is implemented. It does not necessarily
+indicate that the attribute can be read or written in the device's
+current state. "addr" is ignored.
+
+4.82 KVM_ARM_VCPU_INIT
+
+Capability: basic
+Architectures: arm, arm64
+Type: vcpu ioctl
+Parameters: struct kvm_vcpu_init (in)
+Returns: 0 on success; -1 on error
+Errors:
+  EINVAL:    the target is unknown, or the combination of features is invalid.
+  ENOENT:    a features bit specified is unknown.
+
+This tells KVM what type of CPU to present to the guest, and what
+optional features it should have.  This will cause a reset of the cpu
+registers to their initial values.  If this is not called, KVM_RUN will
+return ENOEXEC for that vcpu.
+
+Note that because some registers reflect machine topology, all vcpus
+should be created before this ioctl is invoked.
+
+Userspace can call this function multiple times for a given vcpu, including
+after the vcpu has been run. This will reset the vcpu to its initial
+state. All calls to this function after the initial call must use the same
+target and same set of feature flags, otherwise EINVAL will be returned.
+
+Possible features:
+ - KVM_ARM_VCPU_POWER_OFF: Starts the CPU in a power-off state.
+ Depends on KVM_CAP_ARM_PSCI. If not set, the CPU will be powered on
+ and execute guest code when KVM_RUN is called.
+ - KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode.
+ Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
+ - KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 for the CPU.
+ Depends on KVM_CAP_ARM_PSCI_0_2.
+
+
+4.83 KVM_ARM_PREFERRED_TARGET
+
+Capability: basic
+Architectures: arm, arm64
+Type: vm ioctl
+Parameters: struct struct kvm_vcpu_init (out)
+Returns: 0 on success; -1 on error
+Errors:
+ ENODEV: no preferred target available for the host
+
+This queries KVM for preferred CPU target type which can be emulated
+by KVM on underlying host.
+
+The ioctl returns struct kvm_vcpu_init instance containing information
+about preferred CPU target type and recommended features for it. The
+kvm_vcpu_init->features bitmap returned will have feature bits set if
+the preferred target recommends setting these features, but this is
+not mandatory.
+
+The information returned by this ioctl can be used to prepare an instance
+of struct kvm_vcpu_init for KVM_ARM_VCPU_INIT ioctl which will result in
+in VCPU matching underlying host.
+
+
+4.84 KVM_GET_REG_LIST
+
+Capability: basic
+Architectures: arm, arm64, mips
+Type: vcpu ioctl
+Parameters: struct kvm_reg_list (in/out)
+Returns: 0 on success; -1 on error
+Errors:
+  E2BIG:     the reg index list is too big to fit in the array specified by
+             the user (the number required will be written into n).
+
+struct kvm_reg_list {
+ __u64 n; /* number of registers in reg[] */
+ __u64 reg[0];
+};
+
+This ioctl returns the guest registers that are supported for the
+KVM_GET_ONE_REG/KVM_SET_ONE_REG calls.
+
+
+4.85 KVM_ARM_SET_DEVICE_ADDR (deprecated)
+
+Capability: KVM_CAP_ARM_SET_DEVICE_ADDR
+Architectures: arm, arm64
+Type: vm ioctl
+Parameters: struct kvm_arm_device_address (in)
+Returns: 0 on success, -1 on error
+Errors:
+ ENODEV: The device id is unknown
+ ENXIO: Device not supported on current system
+ EEXIST: Address already set
+ E2BIG: Address outside guest physical address space
+ EBUSY: Address overlaps with other device range
+
+struct kvm_arm_device_addr {
+ __u64 id;
+ __u64 addr;
+};
+
+Specify a device address in the guest's physical address space where guests
+can access emulated or directly exposed devices, which the host kernel needs
+to know about. The id field is an architecture specific identifier for a
+specific device.
+
+ARM/arm64 divides the id field into two parts, a device id and an
+address type id specific to the individual device.
+
+  bits: | 63 ... 32 | 31 ... 16 | 15 ... 0 |
+ field: | 0x00000000 | device id | addr type id |
+
+ARM/arm64 currently only require this when using the in-kernel GIC
+support for the hardware VGIC features, using KVM_ARM_DEVICE_VGIC_V2
+as the device id. When setting the base address for the guest's
+mapping of the VGIC virtual CPU and distributor interface, the ioctl
+must be called after calling KVM_CREATE_IRQCHIP, but before calling
+KVM_RUN on any of the VCPUs. Calling this ioctl twice for any of the
+base addresses will return -EEXIST.
+
+Note, this IOCTL is deprecated and the more flexible SET/GET_DEVICE_ATTR API
+should be used instead.
+
+
+4.86 KVM_PPC_RTAS_DEFINE_TOKEN
+
+Capability: KVM_CAP_PPC_RTAS
+Architectures: ppc
+Type: vm ioctl
+Parameters: struct kvm_rtas_token_args
+Returns: 0 on success, -1 on error
+
+Defines a token value for a RTAS (Run Time Abstraction Services)
+service in order to allow it to be handled in the kernel. The
+argument struct gives the name of the service, which must be the name
+of a service that has a kernel-side implementation. If the token
+value is non-zero, it will be associated with that service, and
+subsequent RTAS calls by the guest specifying that token will be
+handled by the kernel. If the token value is 0, then any token
+associated with the service will be forgotten, and subsequent RTAS
+calls by the guest for that service will be passed to userspace to be
+handled.
+
+4.87 KVM_SET_GUEST_DEBUG
+
+Capability: KVM_CAP_SET_GUEST_DEBUG
+Architectures: x86, s390, ppc
+Type: vcpu ioctl
+Parameters: struct kvm_guest_debug (in)
+Returns: 0 on success; -1 on error
+
+struct kvm_guest_debug {
+ __u32 control;
+ __u32 pad;
+ struct kvm_guest_debug_arch arch;
+};
+
+Set up the processor specific debug registers and configure vcpu for
+handling guest debug events. There are two parts to the structure, the
+first a control bitfield indicates the type of debug events to handle
+when running. Common control bits are:
+
+ - KVM_GUESTDBG_ENABLE: guest debugging is enabled
+ - KVM_GUESTDBG_SINGLESTEP: the next run should single-step
+
+The top 16 bits of the control field are architecture specific control
+flags which can include the following:
+
+ - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86]
+ - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390]
+ - KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86]
+ - KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86]
+ - KVM_GUESTDBG_EXIT_PENDING: trigger an immediate guest exit [s390]
+
+For example KVM_GUESTDBG_USE_SW_BP indicates that software breakpoints
+are enabled in memory so we need to ensure breakpoint exceptions are
+correctly trapped and the KVM run loop exits at the breakpoint and not
+running off into the normal guest vector. For KVM_GUESTDBG_USE_HW_BP
+we need to ensure the guest vCPUs architecture specific registers are
+updated to the correct (supplied) values.
+
+The second part of the structure is architecture specific and
+typically contains a set of debug registers.
+
+When debug events exit the main run loop with the reason
+KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run
+structure containing architecture specific debug information.
+
+4.88 KVM_GET_EMULATED_CPUID
+
+Capability: KVM_CAP_EXT_EMUL_CPUID
+Architectures: x86
+Type: system ioctl
+Parameters: struct kvm_cpuid2 (in/out)
+Returns: 0 on success, -1 on error
+
+struct kvm_cpuid2 {
+ __u32 nent;
+ __u32 flags;
+ struct kvm_cpuid_entry2 entries[0];
+};
+
+The member 'flags' is used for passing flags from userspace.
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0)
+#define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1)
+#define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2)
+
+struct kvm_cpuid_entry2 {
+ __u32 function;
+ __u32 index;
+ __u32 flags;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding[3];
+};
+
+This ioctl returns x86 cpuid features which are emulated by
+kvm.Userspace can use the information returned by this ioctl to query
+which features are emulated by kvm instead of being present natively.
+
+Userspace invokes KVM_GET_EMULATED_CPUID by passing a kvm_cpuid2
+structure with the 'nent' field indicating the number of entries in
+the variable-size array 'entries'. If the number of entries is too low
+to describe the cpu capabilities, an error (E2BIG) is returned. If the
+number is too high, the 'nent' field is adjusted and an error (ENOMEM)
+is returned. If the number is just right, the 'nent' field is adjusted
+to the number of valid entries in the 'entries' array, which is then
+filled.
+
+The entries returned are the set CPUID bits of the respective features
+which kvm emulates, as returned by the CPUID instruction, with unknown
+or unsupported feature bits cleared.
+
+Features like x2apic, for example, may not be present in the host cpu
+but are exposed by kvm in KVM_GET_SUPPORTED_CPUID because they can be
+emulated efficiently and thus not included here.
+
+The fields in each entry are defined as follows:
+
+ function: the eax value used to obtain the entry
+ index: the ecx value used to obtain the entry (for entries that are
+ affected by ecx)
+ flags: an OR of zero or more of the following:
+ KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
+ if the index field is valid
+ KVM_CPUID_FLAG_STATEFUL_FUNC:
+ if cpuid for this function returns different values for successive
+ invocations; there will be several entries with the same function,
+ all with this flag set
+ KVM_CPUID_FLAG_STATE_READ_NEXT:
+ for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
+ the first entry to be read by a cpu
+ eax, ebx, ecx, edx: the values returned by the cpuid instruction for
+ this function/index combination
+
+4.89 KVM_S390_MEM_OP
+
+Capability: KVM_CAP_S390_MEM_OP
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_mem_op (in)
+Returns: = 0 on success,
+ < 0 on generic error (e.g. -EFAULT or -ENOMEM),
+ > 0 if an exception occurred while walking the page tables
+
+Read or write data from/to the logical (virtual) memory of a VPCU.
+
+Parameters are specified via the following structure:
+
+struct kvm_s390_mem_op {
+ __u64 gaddr; /* the guest address */
+ __u64 flags; /* flags */
+ __u32 size; /* amount of bytes */
+ __u32 op; /* type of operation */
+ __u64 buf; /* buffer in userspace */
+ __u8 ar; /* the access register number */
+ __u8 reserved[31]; /* should be set to 0 */
+};
+
+The type of operation is specified in the "op" field. It is either
+KVM_S390_MEMOP_LOGICAL_READ for reading from logical memory space or
+KVM_S390_MEMOP_LOGICAL_WRITE for writing to logical memory space. The
+KVM_S390_MEMOP_F_CHECK_ONLY flag can be set in the "flags" field to check
+whether the corresponding memory access would create an access exception
+(without touching the data in the memory at the destination). In case an
+access exception occurred while walking the MMU tables of the guest, the
+ioctl returns a positive error number to indicate the type of exception.
+This exception is also raised directly at the corresponding VCPU if the
+flag KVM_S390_MEMOP_F_INJECT_EXCEPTION is set in the "flags" field.
+
+The start address of the memory region has to be specified in the "gaddr"
+field, and the length of the region in the "size" field. "buf" is the buffer
+supplied by the userspace application where the read data should be written
+to for KVM_S390_MEMOP_LOGICAL_READ, or where the data that should be written
+is stored for a KVM_S390_MEMOP_LOGICAL_WRITE. "buf" is unused and can be NULL
+when KVM_S390_MEMOP_F_CHECK_ONLY is specified. "ar" designates the access
+register number to be used.
+
+The "reserved" field is meant for future extensions. It is not used by
+KVM with the currently defined set of flags.
+
+4.90 KVM_S390_GET_SKEYS
+
+Capability: KVM_CAP_S390_SKEYS
+Architectures: s390
+Type: vm ioctl
+Parameters: struct kvm_s390_skeys
+Returns: 0 on success, KVM_S390_GET_KEYS_NONE if guest is not using storage
+ keys, negative value on error
+
+This ioctl is used to get guest storage key values on the s390
+architecture. The ioctl takes parameters via the kvm_s390_skeys struct.
+
+struct kvm_s390_skeys {
+ __u64 start_gfn;
+ __u64 count;
+ __u64 skeydata_addr;
+ __u32 flags;
+ __u32 reserved[9];
+};
+
+The start_gfn field is the number of the first guest frame whose storage keys
+you want to get.
+
+The count field is the number of consecutive frames (starting from start_gfn)
+whose storage keys to get. The count field must be at least 1 and the maximum
+allowed value is defined as KVM_S390_SKEYS_ALLOC_MAX. Values outside this range
+will cause the ioctl to return -EINVAL.
+
+The skeydata_addr field is the address to a buffer large enough to hold count
+bytes. This buffer will be filled with storage key data by the ioctl.
+
+4.91 KVM_S390_SET_SKEYS
+
+Capability: KVM_CAP_S390_SKEYS
+Architectures: s390
+Type: vm ioctl
+Parameters: struct kvm_s390_skeys
+Returns: 0 on success, negative value on error
+
+This ioctl is used to set guest storage key values on the s390
+architecture. The ioctl takes parameters via the kvm_s390_skeys struct.
+See section on KVM_S390_GET_SKEYS for struct definition.
+
+The start_gfn field is the number of the first guest frame whose storage keys
+you want to set.
+
+The count field is the number of consecutive frames (starting from start_gfn)
+whose storage keys to get. The count field must be at least 1 and the maximum
+allowed value is defined as KVM_S390_SKEYS_ALLOC_MAX. Values outside this range
+will cause the ioctl to return -EINVAL.
+
+The skeydata_addr field is the address to a buffer containing count bytes of
+storage keys. Each byte in the buffer will be set as the storage key for a
+single frame starting at start_gfn for count frames.
+
+Note: If any architecturally invalid key value is found in the given data then
+the ioctl will return -EINVAL.
+
+4.92 KVM_S390_IRQ
+
+Capability: KVM_CAP_S390_INJECT_IRQ
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_irq (in)
+Returns: 0 on success, -1 on error
+Errors:
+ EINVAL: interrupt type is invalid
+ type is KVM_S390_SIGP_STOP and flag parameter is invalid value
+ type is KVM_S390_INT_EXTERNAL_CALL and code is bigger
+ than the maximum of VCPUs
+ EBUSY: type is KVM_S390_SIGP_SET_PREFIX and vcpu is not stopped
+ type is KVM_S390_SIGP_STOP and a stop irq is already pending
+ type is KVM_S390_INT_EXTERNAL_CALL and an external call interrupt
+ is already pending
+
+Allows to inject an interrupt to the guest.
+
+Using struct kvm_s390_irq as a parameter allows
+to inject additional payload which is not
+possible via KVM_S390_INTERRUPT.
+
+Interrupt parameters are passed via kvm_s390_irq:
+
+struct kvm_s390_irq {
+ __u64 type;
+ union {
+ struct kvm_s390_io_info io;
+ struct kvm_s390_ext_info ext;
+ struct kvm_s390_pgm_info pgm;
+ struct kvm_s390_emerg_info emerg;
+ struct kvm_s390_extcall_info extcall;
+ struct kvm_s390_prefix_info prefix;
+ struct kvm_s390_stop_info stop;
+ struct kvm_s390_mchk_info mchk;
+ char reserved[64];
+ } u;
+};
+
+type can be one of the following:
+
+KVM_S390_SIGP_STOP - sigp stop; parameter in .stop
+KVM_S390_PROGRAM_INT - program check; parameters in .pgm
+KVM_S390_SIGP_SET_PREFIX - sigp set prefix; parameters in .prefix
+KVM_S390_RESTART - restart; no parameters
+KVM_S390_INT_CLOCK_COMP - clock comparator interrupt; no parameters
+KVM_S390_INT_CPU_TIMER - CPU timer interrupt; no parameters
+KVM_S390_INT_EMERGENCY - sigp emergency; parameters in .emerg
+KVM_S390_INT_EXTERNAL_CALL - sigp external call; parameters in .extcall
+KVM_S390_MCHK - machine check interrupt; parameters in .mchk
+
+
+Note that the vcpu ioctl is asynchronous to vcpu execution.
+
+4.94 KVM_S390_GET_IRQ_STATE
+
+Capability: KVM_CAP_S390_IRQ_STATE
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_irq_state (out)
+Returns: >= number of bytes copied into buffer,
+ -EINVAL if buffer size is 0,
+ -ENOBUFS if buffer size is too small to fit all pending interrupts,
+ -EFAULT if the buffer address was invalid
+
+This ioctl allows userspace to retrieve the complete state of all currently
+pending interrupts in a single buffer. Use cases include migration
+and introspection. The parameter structure contains the address of a
+userspace buffer and its length:
+
+struct kvm_s390_irq_state {
+ __u64 buf;
+ __u32 flags;
+ __u32 len;
+ __u32 reserved[4];
+};
+
+Userspace passes in the above struct and for each pending interrupt a
+struct kvm_s390_irq is copied to the provided buffer.
+
+If -ENOBUFS is returned the buffer provided was too small and userspace
+may retry with a bigger buffer.
+
+4.95 KVM_S390_SET_IRQ_STATE
+
+Capability: KVM_CAP_S390_IRQ_STATE
+Architectures: s390
+Type: vcpu ioctl
+Parameters: struct kvm_s390_irq_state (in)
+Returns: 0 on success,
+ -EFAULT if the buffer address was invalid,
+ -EINVAL for an invalid buffer length (see below),
+ -EBUSY if there were already interrupts pending,
+ errors occurring when actually injecting the
+ interrupt. See KVM_S390_IRQ.
+
+This ioctl allows userspace to set the complete state of all cpu-local
+interrupts currently pending for the vcpu. It is intended for restoring
+interrupt state after a migration. The input parameter is a userspace buffer
+containing a struct kvm_s390_irq_state:
+
+struct kvm_s390_irq_state {
+ __u64 buf;
+ __u32 len;
+ __u32 pad;
+};
+
+The userspace memory referenced by buf contains a struct kvm_s390_irq
+for each interrupt to be injected into the guest.
+If one of the interrupts could not be injected for some reason the
+ioctl aborts.
+
+len must be a multiple of sizeof(struct kvm_s390_irq). It must be > 0
+and it must not exceed (max_vcpus + 32) * sizeof(struct kvm_s390_irq),
+which is the maximum number of possibly pending cpu-local interrupts.
+
+5. The kvm_run structure
+------------------------
+
+Application code obtains a pointer to the kvm_run structure by
+mmap()ing a vcpu fd. From that point, application code can control
+execution by changing fields in kvm_run prior to calling the KVM_RUN
+ioctl, and obtain information about the reason KVM_RUN returned by
+looking up structure members.
+
+struct kvm_run {
+ /* in */
+ __u8 request_interrupt_window;
+
+Request that KVM_RUN return when it becomes possible to inject external
+interrupts into the guest. Useful in conjunction with KVM_INTERRUPT.
+
+ __u8 padding1[7];
+
+ /* out */
+ __u32 exit_reason;
+
+When KVM_RUN has returned successfully (return value 0), this informs
+application code why KVM_RUN has returned. Allowable values for this
+field are detailed below.
+
+ __u8 ready_for_interrupt_injection;
+
+If request_interrupt_window has been specified, this field indicates
+an interrupt can be injected now with KVM_INTERRUPT.
+
+ __u8 if_flag;
+
+The value of the current interrupt flag. Only valid if in-kernel
+local APIC is not used.
+
+ __u8 padding2[2];
+
+ /* in (pre_kvm_run), out (post_kvm_run) */
+ __u64 cr8;
+
+The value of the cr8 register. Only valid if in-kernel local APIC is
+not used. Both input and output.
+
+ __u64 apic_base;
+
+The value of the APIC BASE msr. Only valid if in-kernel local
+APIC is not used. Both input and output.
+
+ union {
+ /* KVM_EXIT_UNKNOWN */
+ struct {
+ __u64 hardware_exit_reason;
+ } hw;
+
+If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown
+reasons. Further architecture-specific information is available in
+hardware_exit_reason.
+
+ /* KVM_EXIT_FAIL_ENTRY */
+ struct {
+ __u64 hardware_entry_failure_reason;
+ } fail_entry;
+
+If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due
+to unknown reasons. Further architecture-specific information is
+available in hardware_entry_failure_reason.
+
+ /* KVM_EXIT_EXCEPTION */
+ struct {
+ __u32 exception;
+ __u32 error_code;
+ } ex;
+
+Unused.
+
+ /* KVM_EXIT_IO */
+ struct {
+#define KVM_EXIT_IO_IN 0
+#define KVM_EXIT_IO_OUT 1
+ __u8 direction;
+ __u8 size; /* bytes */
+ __u16 port;
+ __u32 count;
+ __u64 data_offset; /* relative to kvm_run start */
+ } io;
+
+If exit_reason is KVM_EXIT_IO, then the vcpu has
+executed a port I/O instruction which could not be satisfied by kvm.
+data_offset describes where the data is located (KVM_EXIT_IO_OUT) or
+where kvm expects application code to place the data for the next
+KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a packed array.
+
+ struct {
+ struct kvm_debug_exit_arch arch;
+ } debug;
+
+Unused.
+
+ /* KVM_EXIT_MMIO */
+ struct {
+ __u64 phys_addr;
+ __u8 data[8];
+ __u32 len;
+ __u8 is_write;
+ } mmio;
+
+If exit_reason is KVM_EXIT_MMIO, then the vcpu has
+executed a memory-mapped I/O instruction which could not be satisfied
+by kvm. The 'data' member contains the written data if 'is_write' is
+true, and should be filled by application code otherwise.
+
+The 'data' member contains, in its first 'len' bytes, the value as it would
+appear if the VCPU performed a load or store of the appropriate width directly
+to the byte array.
+
+NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR and
+ KVM_EXIT_EPR the corresponding
+operations are complete (and guest state is consistent) only after userspace
+has re-entered the kernel with KVM_RUN. The kernel side will first finish
+incomplete operations and then check for pending signals. Userspace
+can re-enter the guest with an unmasked signal pending to complete
+pending operations.
+
+ /* KVM_EXIT_HYPERCALL */
+ struct {
+ __u64 nr;
+ __u64 args[6];
+ __u64 ret;
+ __u32 longmode;
+ __u32 pad;
+ } hypercall;
+
+Unused. This was once used for 'hypercall to userspace'. To implement
+such functionality, use KVM_EXIT_IO (x86) or KVM_EXIT_MMIO (all except s390).
+Note KVM_EXIT_IO is significantly faster than KVM_EXIT_MMIO.
+
+ /* KVM_EXIT_TPR_ACCESS */
+ struct {
+ __u64 rip;
+ __u32 is_write;
+ __u32 pad;
+ } tpr_access;
+
+To be documented (KVM_TPR_ACCESS_REPORTING).
+
+ /* KVM_EXIT_S390_SIEIC */
+ struct {
+ __u8 icptcode;
+ __u64 mask; /* psw upper half */
+ __u64 addr; /* psw lower half */
+ __u16 ipa;
+ __u32 ipb;
+ } s390_sieic;
+
+s390 specific.
+
+ /* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR 1
+#define KVM_S390_RESET_CLEAR 2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT 8
+#define KVM_S390_RESET_IPL 16
+ __u64 s390_reset_flags;
+
+s390 specific.
+
+ /* KVM_EXIT_S390_UCONTROL */
+ struct {
+ __u64 trans_exc_code;
+ __u32 pgm_code;
+ } s390_ucontrol;
+
+s390 specific. A page fault has occurred for a user controlled virtual
+machine (KVM_VM_S390_UNCONTROL) on it's host page table that cannot be
+resolved by the kernel.
+The program code and the translation exception code that were placed
+in the cpu's lowcore are presented here as defined by the z Architecture
+Principles of Operation Book in the Chapter for Dynamic Address Translation
+(DAT)
+
+ /* KVM_EXIT_DCR */
+ struct {
+ __u32 dcrn;
+ __u32 data;
+ __u8 is_write;
+ } dcr;
+
+Deprecated - was used for 440 KVM.
+
+ /* KVM_EXIT_OSI */
+ struct {
+ __u64 gprs[32];
+ } osi;
+
+MOL uses a special hypercall interface it calls 'OSI'. To enable it, we catch
+hypercalls and exit with this exit struct that contains all the guest gprs.
+
+If exit_reason is KVM_EXIT_OSI, then the vcpu has triggered such a hypercall.
+Userspace can now handle the hypercall and when it's done modify the gprs as
+necessary. Upon guest entry all guest GPRs will then be replaced by the values
+in this struct.
+
+ /* KVM_EXIT_PAPR_HCALL */
+ struct {
+ __u64 nr;
+ __u64 ret;
+ __u64 args[9];
+ } papr_hcall;
+
+This is used on 64-bit PowerPC when emulating a pSeries partition,
+e.g. with the 'pseries' machine type in qemu. It occurs when the
+guest does a hypercall using the 'sc 1' instruction. The 'nr' field
+contains the hypercall number (from the guest R3), and 'args' contains
+the arguments (from the guest R4 - R12). Userspace should put the
+return code in 'ret' and any extra returned values in args[].
+The possible hypercalls are defined in the Power Architecture Platform
+Requirements (PAPR) document available from www.power.org (free
+developer registration required to access it).
+
+ /* KVM_EXIT_S390_TSCH */
+ struct {
+ __u16 subchannel_id;
+ __u16 subchannel_nr;
+ __u32 io_int_parm;
+ __u32 io_int_word;
+ __u32 ipb;
+ __u8 dequeued;
+ } s390_tsch;
+
+s390 specific. This exit occurs when KVM_CAP_S390_CSS_SUPPORT has been enabled
+and TEST SUBCHANNEL was intercepted. If dequeued is set, a pending I/O
+interrupt for the target subchannel has been dequeued and subchannel_id,
+subchannel_nr, io_int_parm and io_int_word contain the parameters for that
+interrupt. ipb is needed for instruction parameter decoding.
+
+ /* KVM_EXIT_EPR */
+ struct {
+ __u32 epr;
+ } epr;
+
+On FSL BookE PowerPC chips, the interrupt controller has a fast patch
+interrupt acknowledge path to the core. When the core successfully
+delivers an interrupt, it automatically populates the EPR register with
+the interrupt vector number and acknowledges the interrupt inside
+the interrupt controller.
+
+In case the interrupt controller lives in user space, we need to do
+the interrupt acknowledge cycle through it to fetch the next to be
+delivered interrupt vector using this exit.
+
+It gets triggered whenever both KVM_CAP_PPC_EPR are enabled and an
+external interrupt has just been delivered into the guest. User space
+should put the acknowledged interrupt vector into the 'epr' field.
+
+ /* KVM_EXIT_SYSTEM_EVENT */
+ struct {
+#define KVM_SYSTEM_EVENT_SHUTDOWN 1
+#define KVM_SYSTEM_EVENT_RESET 2
+ __u32 type;
+ __u64 flags;
+ } system_event;
+
+If exit_reason is KVM_EXIT_SYSTEM_EVENT then the vcpu has triggered
+a system-level event using some architecture specific mechanism (hypercall
+or some special instruction). In case of ARM/ARM64, this is triggered using
+HVC instruction based PSCI call from the vcpu. The 'type' field describes
+the system-level event type. The 'flags' field describes architecture
+specific flags for the system-level event.
+
+Valid values for 'type' are:
+ KVM_SYSTEM_EVENT_SHUTDOWN -- the guest has requested a shutdown of the
+ VM. Userspace is not obliged to honour this, and if it does honour
+ this does not need to destroy the VM synchronously (ie it may call
+ KVM_RUN again before shutdown finally occurs).
+ KVM_SYSTEM_EVENT_RESET -- the guest has requested a reset of the VM.
+ As with SHUTDOWN, userspace can choose to ignore the request, or
+ to schedule the reset to occur in the future and may call KVM_RUN again.
+
+ /* Fix the size of the union. */
+ char padding[256];
+ };
+
+ /*
+ * shared registers between kvm and userspace.
+ * kvm_valid_regs specifies the register classes set by the host
+ * kvm_dirty_regs specified the register classes dirtied by userspace
+ * struct kvm_sync_regs is architecture specific, as well as the
+ * bits for kvm_valid_regs and kvm_dirty_regs
+ */
+ __u64 kvm_valid_regs;
+ __u64 kvm_dirty_regs;
+ union {
+ struct kvm_sync_regs regs;
+ char padding[1024];
+ } s;
+
+If KVM_CAP_SYNC_REGS is defined, these fields allow userspace to access
+certain guest registers without having to call SET/GET_*REGS. Thus we can
+avoid some system call overhead if userspace has to handle the exit.
+Userspace can query the validity of the structure by checking
+kvm_valid_regs for specific bits. These bits are architecture specific
+and usually define the validity of a groups of registers. (e.g. one bit
+ for general purpose registers)
+
+Please note that the kernel is allowed to use the kvm_run structure as the
+primary storage for certain register types. Therefore, the kernel may use the
+values in kvm_run even if the corresponding bit in kvm_dirty_regs is not set.
+
+};
+
+
+
+6. Capabilities that can be enabled on vCPUs
+--------------------------------------------
+
+There are certain capabilities that change the behavior of the virtual CPU or
+the virtual machine when enabled. To enable them, please see section 4.37.
+Below you can find a list of capabilities and what their effect on the vCPU or
+the virtual machine is when enabling them.
+
+The following information is provided along with the description:
+
+ Architectures: which instruction set architectures provide this ioctl.
+ x86 includes both i386 and x86_64.
+
+ Target: whether this is a per-vcpu or per-vm capability.
+
+ Parameters: what parameters are accepted by the capability.
+
+ Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
+ are not detailed, but errors with specific meanings are.
+
+
+6.1 KVM_CAP_PPC_OSI
+
+Architectures: ppc
+Target: vcpu
+Parameters: none
+Returns: 0 on success; -1 on error
+
+This capability enables interception of OSI hypercalls that otherwise would
+be treated as normal system calls to be injected into the guest. OSI hypercalls
+were invented by Mac-on-Linux to have a standardized communication mechanism
+between the guest and the host.
+
+When this capability is enabled, KVM_EXIT_OSI can occur.
+
+
+6.2 KVM_CAP_PPC_PAPR
+
+Architectures: ppc
+Target: vcpu
+Parameters: none
+Returns: 0 on success; -1 on error
+
+This capability enables interception of PAPR hypercalls. PAPR hypercalls are
+done using the hypercall instruction "sc 1".
+
+It also sets the guest privilege level to "supervisor" mode. Usually the guest
+runs in "hypervisor" privilege mode with a few missing features.
+
+In addition to the above, it changes the semantics of SDR1. In this mode, the
+HTAB address part of SDR1 contains an HVA instead of a GPA, as PAPR keeps the
+HTAB invisible to the guest.
+
+When this capability is enabled, KVM_EXIT_PAPR_HCALL can occur.
+
+
+6.3 KVM_CAP_SW_TLB
+
+Architectures: ppc
+Target: vcpu
+Parameters: args[0] is the address of a struct kvm_config_tlb
+Returns: 0 on success; -1 on error
+
+struct kvm_config_tlb {
+ __u64 params;
+ __u64 array;
+ __u32 mmu_type;
+ __u32 array_len;
+};
+
+Configures the virtual CPU's TLB array, establishing a shared memory area
+between userspace and KVM. The "params" and "array" fields are userspace
+addresses of mmu-type-specific data structures. The "array_len" field is an
+safety mechanism, and should be set to the size in bytes of the memory that
+userspace has reserved for the array. It must be at least the size dictated
+by "mmu_type" and "params".
+
+While KVM_RUN is active, the shared region is under control of KVM. Its
+contents are undefined, and any modification by userspace results in
+boundedly undefined behavior.
+
+On return from KVM_RUN, the shared region will reflect the current state of
+the guest's TLB. If userspace makes any changes, it must call KVM_DIRTY_TLB
+to tell KVM which entries have been changed, prior to calling KVM_RUN again
+on this vcpu.
+
+For mmu types KVM_MMU_FSL_BOOKE_NOHV and KVM_MMU_FSL_BOOKE_HV:
+ - The "params" field is of type "struct kvm_book3e_206_tlb_params".
+ - The "array" field points to an array of type "struct
+ kvm_book3e_206_tlb_entry".
+ - The array consists of all entries in the first TLB, followed by all
+ entries in the second TLB.
+ - Within a TLB, entries are ordered first by increasing set number. Within a
+ set, entries are ordered by way (increasing ESEL).
+ - The hash for determining set number in TLB0 is: (MAS2 >> 12) & (num_sets - 1)
+ where "num_sets" is the tlb_sizes[] value divided by the tlb_ways[] value.
+ - The tsize field of mas1 shall be set to 4K on TLB0, even though the
+ hardware ignores this value for TLB0.
+
+6.4 KVM_CAP_S390_CSS_SUPPORT
+
+Architectures: s390
+Target: vcpu
+Parameters: none
+Returns: 0 on success; -1 on error
+
+This capability enables support for handling of channel I/O instructions.
+
+TEST PENDING INTERRUPTION and the interrupt portion of TEST SUBCHANNEL are
+handled in-kernel, while the other I/O instructions are passed to userspace.
+
+When this capability is enabled, KVM_EXIT_S390_TSCH will occur on TEST
+SUBCHANNEL intercepts.
+
+Note that even though this capability is enabled per-vcpu, the complete
+virtual machine is affected.
+
+6.5 KVM_CAP_PPC_EPR
+
+Architectures: ppc
+Target: vcpu
+Parameters: args[0] defines whether the proxy facility is active
+Returns: 0 on success; -1 on error
+
+This capability enables or disables the delivery of interrupts through the
+external proxy facility.
+
+When enabled (args[0] != 0), every time the guest gets an external interrupt
+delivered, it automatically exits into user space with a KVM_EXIT_EPR exit
+to receive the topmost interrupt vector.
+
+When disabled (args[0] == 0), behavior is as if this facility is unsupported.
+
+When this capability is enabled, KVM_EXIT_EPR can occur.
+
+6.6 KVM_CAP_IRQ_MPIC
+
+Architectures: ppc
+Parameters: args[0] is the MPIC device fd
+ args[1] is the MPIC CPU number for this vcpu
+
+This capability connects the vcpu to an in-kernel MPIC device.
+
+6.7 KVM_CAP_IRQ_XICS
+
+Architectures: ppc
+Target: vcpu
+Parameters: args[0] is the XICS device fd
+ args[1] is the XICS CPU number (server ID) for this vcpu
+
+This capability connects the vcpu to an in-kernel XICS device.
+
+6.8 KVM_CAP_S390_IRQCHIP
+
+Architectures: s390
+Target: vm
+Parameters: none
+
+This capability enables the in-kernel irqchip for s390. Please refer to
+"4.24 KVM_CREATE_IRQCHIP" for details.
+
+6.9 KVM_CAP_MIPS_FPU
+
+Architectures: mips
+Target: vcpu
+Parameters: args[0] is reserved for future use (should be 0).
+
+This capability allows the use of the host Floating Point Unit by the guest. It
+allows the Config1.FP bit to be set to enable the FPU in the guest. Once this is
+done the KVM_REG_MIPS_FPR_* and KVM_REG_MIPS_FCR_* registers can be accessed
+(depending on the current guest FPU register mode), and the Status.FR,
+Config5.FRE bits are accessible via the KVM API and also from the guest,
+depending on them being supported by the FPU.
+
+6.10 KVM_CAP_MIPS_MSA
+
+Architectures: mips
+Target: vcpu
+Parameters: args[0] is reserved for future use (should be 0).
+
+This capability allows the use of the MIPS SIMD Architecture (MSA) by the guest.
+It allows the Config3.MSAP bit to be set to enable the use of MSA by the guest.
+Once this is done the KVM_REG_MIPS_VEC_* and KVM_REG_MIPS_MSA_* registers can be
+accessed, and the Config5.MSAEn bit is accessible via the KVM API and also from
+the guest.
+
+7. Capabilities that can be enabled on VMs
+------------------------------------------
+
+There are certain capabilities that change the behavior of the virtual
+machine when enabled. To enable them, please see section 4.37. Below
+you can find a list of capabilities and what their effect on the VM
+is when enabling them.
+
+The following information is provided along with the description:
+
+ Architectures: which instruction set architectures provide this ioctl.
+ x86 includes both i386 and x86_64.
+
+ Parameters: what parameters are accepted by the capability.
+
+ Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
+ are not detailed, but errors with specific meanings are.
+
+
+7.1 KVM_CAP_PPC_ENABLE_HCALL
+
+Architectures: ppc
+Parameters: args[0] is the sPAPR hcall number
+ args[1] is 0 to disable, 1 to enable in-kernel handling
+
+This capability controls whether individual sPAPR hypercalls (hcalls)
+get handled by the kernel or not. Enabling or disabling in-kernel
+handling of an hcall is effective across the VM. On creation, an
+initial set of hcalls are enabled for in-kernel handling, which
+consists of those hcalls for which in-kernel handlers were implemented
+before this capability was implemented. If disabled, the kernel will
+not to attempt to handle the hcall, but will always exit to userspace
+to handle it. Note that it may not make sense to enable some and
+disable others of a group of related hcalls, but KVM does not prevent
+userspace from doing that.
+
+If the hcall number specified is not one that has an in-kernel
+implementation, the KVM_ENABLE_CAP ioctl will fail with an EINVAL
+error.
+
+7.2 KVM_CAP_S390_USER_SIGP
+
+Architectures: s390
+Parameters: none
+
+This capability controls which SIGP orders will be handled completely in user
+space. With this capability enabled, all fast orders will be handled completely
+in the kernel:
+- SENSE
+- SENSE RUNNING
+- EXTERNAL CALL
+- EMERGENCY SIGNAL
+- CONDITIONAL EMERGENCY SIGNAL
+
+All other orders will be handled completely in user space.
+
+Only privileged operation exceptions will be checked for in the kernel (or even
+in the hardware prior to interception). If this capability is not enabled, the
+old way of handling SIGP orders is used (partially in kernel and user space).
+
+7.3 KVM_CAP_S390_VECTOR_REGISTERS
+
+Architectures: s390
+Parameters: none
+Returns: 0 on success, negative value on error
+
+Allows use of the vector registers introduced with z13 processor, and
+provides for the synchronization between host and user space. Will
+return -EINVAL if the machine does not support vectors.
+
+7.4 KVM_CAP_S390_USER_STSI
+
+Architectures: s390
+Parameters: none
+
+This capability allows post-handlers for the STSI instruction. After
+initial handling in the kernel, KVM exits to user space with
+KVM_EXIT_S390_STSI to allow user space to insert further data.
+
+Before exiting to userspace, kvm handlers should fill in s390_stsi field of
+vcpu->run:
+struct {
+ __u64 addr;
+ __u8 ar;
+ __u8 reserved;
+ __u8 fc;
+ __u8 sel1;
+ __u16 sel2;
+} s390_stsi;
+
+@addr - guest address of STSI SYSIB
+@fc - function code
+@sel1 - selector 1
+@sel2 - selector 2
+@ar - access register number
+
+KVM handlers should exit to userspace with rc = -EREMOTE.
+
+
+8. Other capabilities.
+----------------------
+
+This section lists capabilities that give information about other
+features of the KVM implementation.
+
+8.1 KVM_CAP_PPC_HWRNG
+
+Architectures: ppc
+
+This capability, if KVM_CHECK_EXTENSION indicates that it is
+available, means that that the kernel has an implementation of the
+H_RANDOM hypercall backed by a hardware random-number generator.
+If present, the kernel H_RANDOM handler can be enabled for guest use
+with the KVM_CAP_PPC_ENABLE_HCALL capability.