summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/at91-kizbox.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/at91-kizbox.dts')
-rw-r--r--arch/arm/boot/dts/at91-kizbox.dts159
1 files changed, 159 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
new file mode 100644
index 000000000..bf18ece0c
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -0,0 +1,159 @@
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ * 2014-2015 Gaƫl PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox";
+ compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x2000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ macb0: ethernet@fffc4000 {
+ phy-mode = "mii";
+ pinctrl-0 = <&pinctrl_macb_rmii
+ &pinctrl_macb_rmii_mii_alt>;
+ status = "okay";
+ };
+
+ usart3: serial@fffd0000 {
+ status = "okay";
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ watchdog@fffffd40 {
+ timeout-sec = <15>;
+ atmel,max-heartbeat-sec = <16>;
+ atmel,min-heartbeat-sec = <0>;
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <1>;
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+
+ user {
+ label = "PB_USER";
+ gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x101>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ network_green {
+ label = "pwm:green:network";
+ pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ network_red {
+ label = "pwm:red:network";
+ pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ user_green {
+ label = "pwm:green:user";
+ pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ user_red {
+ label = "pwm:red:user";
+ pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ tcb_pwm: pwm {
+ compatible = "atmel,tcb-pwm";
+ #pwm-cells = <3>;
+ tc-block = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tcb1_tioa0
+ &pinctrl_tcb1_tioa1
+ &pinctrl_tcb1_tioa2
+ &pinctrl_tcb1_tiob0>;
+ };
+};