summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/lpc4350-hitex-eval.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/lpc4350-hitex-eval.dts')
-rw-r--r--arch/arm/boot/dts/lpc4350-hitex-eval.dts175
1 files changed, 175 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index 32bc7ff4e..022d49543 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -15,6 +15,9 @@
#include "lpc18xx.dtsi"
#include "lpc4350.dtsi"
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
/ {
model = "Hitex LPC4350 Evaluation Board";
compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
@@ -34,6 +37,88 @@
device_type = "memory";
reg = <0x28000000 0x800000>; /* 8 MB */
};
+
+ pca_buttons {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ autorepeat;
+
+ button@0 {
+ label = "joy:right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "joy:up";
+ linux,code = <KEY_UP>;
+ gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+
+ button@2 {
+ label = "joy:enter";
+ linux,code = <KEY_ENTER>;
+ gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ button@3 {
+ label = "joy:left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button@4 {
+ label = "joy:down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ button@5 {
+ label = "user:sw3";
+ linux,code = <KEY_F1>;
+ gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ button@6 {
+ label = "user:sw4";
+ linux,code = <KEY_F2>;
+ gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ button@7 {
+ label = "user:sw5";
+ linux,code = <KEY_F3>;
+ gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ pca_leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "ext:led0";
+ gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "ext:led1";
+ gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ label = "ext:led2";
+ gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led3 {
+ label = "ext:led3";
+ gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&pinctrl {
@@ -186,6 +271,43 @@
};
};
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ spifi_pins: spifi-pins {
+ spifi_clk_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_mosi_miso_sio2_3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
uart0_pins: uart0-pins {
uart0_rx_cfg {
pins = "pf_11";
@@ -271,6 +393,31 @@
clock-frequency = <25000000>;
};
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ sensor@18 {
+ compatible = "nxp,jc42";
+ reg = <0x18>;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,24c02";
+ reg = <0x50>;
+ };
+
+ pca_gpio: gpio@24 {
+ compatible = "nxp,pca9673";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
&mac {
status = "okay";
phy-mode = "mii";
@@ -278,6 +425,34 @@
pinctrl-0 = <&enet_mii_pins>;
};
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x040000>; /* 256 KiB */
+ };
+
+ partition@1 {
+ label = "kernel";
+ reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+ };
+
+ partition@2 {
+ label = "rootfs";
+ reg = <0x300000 0x500000>; /* 5 MiB */
+ };
+ };
+};
+
&uart0 {
status = "okay";
pinctrl-names = "default";