summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/broadcom
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/broadcom')
-rw-r--r--arch/arm64/boot/dts/broadcom/Makefile1
l---------arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi1
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts30
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm2837.dtsi76
l---------arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi1
l---------arch/arm64/boot/dts/broadcom/bcm283x.dtsi1
-rw-r--r--arch/arm64/boot/dts/broadcom/ns2-svk.dts53
-rw-r--r--arch/arm64/boot/dts/broadcom/ns2.dtsi166
8 files changed, 325 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index bec1f8b36..05faf2a8a 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
new file mode 120000
index 000000000..3937b77cb
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm2835-rpi.dtsi \ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
new file mode 100644
index 000000000..7841b724e
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+ model = "Raspberry Pi 3 Model B";
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ leds {
+ act {
+ gpios = <&gpio 47 0>;
+ };
+
+ pwr {
+ label = "PWR";
+ gpios = <&gpio 35 0>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
new file mode 100644
index 000000000..8216bbb29
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
@@ -0,0 +1,76 @@
+#include "bcm283x.dtsi"
+
+/ {
+ compatible = "brcm,bcm2836";
+
+ soc {
+ ranges = <0x7e000000 0x3f000000 0x1000000>,
+ <0x40000000 0x40000000 0x00001000>;
+ dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+ local_intc: local_intc {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x40000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&local_intc>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&local_intc>;
+ interrupts = <0>, // PHYS_SECURE_PPI
+ <1>, // PHYS_NONSECURE_PPI
+ <3>, // VIRT_PPI
+ <2>; // HYP_PPI
+ always-on;
+ };
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000d8>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000e0>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000e8>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000f0>;
+ };
+ };
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+ compatible = "brcm,bcm2836-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-parent = <&local_intc>;
+ interrupts = <8>;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
new file mode 120000
index 000000000..dca7c057d
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi \ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
new file mode 120000
index 000000000..5f54e4cab
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm283x.dtsi \ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 54ca40c9f..2d7872a36 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -40,10 +40,14 @@
aliases {
serial0 = &uart3;
+ serial1 = &uart0;
+ serial2 = &uart1;
+ serial3 = &uart2;
};
chosen {
stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x66130000";
};
memory {
@@ -52,6 +56,14 @@
};
};
+&pci_phy0 {
+ status = "ok";
+};
+
+&pci_phy1 {
+ status = "ok";
+};
+
&pcie0 {
status = "ok";
};
@@ -68,6 +80,18 @@
status = "ok";
};
+&uart0 {
+ status = "ok";
+};
+
+&uart1 {
+ status = "ok";
+};
+
+&uart2 {
+ status = "ok";
+};
+
&uart3 {
status = "ok";
};
@@ -117,6 +141,18 @@
};
};
+&sata_phy0 {
+ status = "ok";
+};
+
+&sata_phy1 {
+ status = "ok";
+};
+
+&sata {
+ status = "ok";
+};
+
&sdio0 {
status = "ok";
};
@@ -132,3 +168,20 @@
#size-cells = <1>;
};
};
+
+&mdio_mux_iproc {
+ mdio@10 {
+ gphy0: eth-phy@10 {
+ reg = <0x10>;
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_sel>;
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index ec68ec1a8..d4a12fad8 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -88,13 +88,13 @@
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
- IRQ_TYPE_EDGE_RISING)>,
+ IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
- IRQ_TYPE_EDGE_RISING)>,
+ IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
- IRQ_TYPE_EDGE_RISING)>,
+ IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
- IRQ_TYPE_EDGE_RISING)>;
+ IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
@@ -251,6 +251,22 @@
mmu-masters;
};
+ pinctrl: pinctrl@6501d130 {
+ compatible = "brcm,ns2-pinmux";
+ reg = <0x6501d130 0x08>,
+ <0x660a0028 0x04>,
+ <0x660009b0 0x40>;
+ };
+
+ gpio_aon: gpio@65024800 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x65024800 0x50>,
+ <0x65024008 0x18>;
+ ngpios = <6>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
gic: interrupt-controller@65210000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -263,6 +279,65 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
+ cci@65590000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x65590000 0x1000>;
+ ranges = <0 0x65590000 0x10000>;
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1",
+ "arm,cci-400-pmu";
+ reg = <0x9000 0x4000>;
+ interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ mdio_mux_iproc: mdio-mux@6602023c {
+ compatible = "brcm,mdio-mux-iproc";
+ reg = <0x6602023c 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pci_phy0: pci-phy@0 {
+ compatible = "brcm,ns2-pcie-phy";
+ reg = <0x0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ mdio@7 {
+ reg = <0x7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pci_phy1: pci-phy@0 {
+ compatible = "brcm,ns2-pcie-phy";
+ reg = <0x0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ mdio@10 {
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
timer0: timer@66030000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x66030000 0x1000>;
@@ -321,6 +396,16 @@
clock-names = "wdogclk", "apb_pclk";
};
+ gpio_g: gpio@660a0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x660a0000 0x50>;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
i2c1: i2c@660b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x660b0000 0x100>;
@@ -331,6 +416,36 @@
status = "disabled";
};
+ uart0: serial@66100000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x66100000 0x100>;
+ interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@66110000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x66110000 0x100>;
+ interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@66120000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x66120000 0x100>;
+ interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
uart3: serial@66130000 {
compatible = "snps,dw-apb-uart";
reg = <0x66130000 0x100>;
@@ -368,6 +483,49 @@
reg = <0x66220000 0x28>;
};
+ sata_phy: sata_phy@663f0100 {
+ compatible = "brcm,iproc-ns2-sata-phy";
+ reg = <0x663f0100 0x1f00>,
+ <0x663f004c 0x10>;
+ reg-names = "phy", "phy-ctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ sata: ahci@663f2000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x663f2000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ phy-names = "sata-phy";
+ };
+ };
+
sdio0: sdhci@66420000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66420000 0x100>;