2385 files changed, 138461 insertions, 62364 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ede2526ec..a9c4e48bb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2,6 +2,7 @@ config ARM
 	bool
 	default y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
@@ -20,6 +21,7 @@ config ARM
 	select GENERIC_ALLOCATOR
 	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
@@ -33,23 +35,27 @@ config ARM
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
-	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32
-	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32
+	select HAVE_ARCH_HARDENED_USERCOPY
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_BPF_JIT
+	select HAVE_ARM_SMCCC if CPU_V7
+	select HAVE_CBPF_JIT
 	select HAVE_CC_STACKPROTECTOR
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_DMA_ATTRS
 	select HAVE_DMA_CONTIGUOUS if MMU
-	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32
+	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
+	select HAVE_EXIT_THREAD
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_IDE if PCI || ISA || PCMCIA
@@ -63,6 +69,7 @@ config ARM
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_MEMBLOCK
 	select HAVE_MOD_ARCH_SPECIFIC
+	select HAVE_NMI
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
 	select HAVE_PERF_EVENTS
@@ -76,6 +83,8 @@ config ARM
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_REL
 	select NO_BOOTMEM
+	select OF_EARLY_FLATTREE if OF
+	select OF_RESERVED_MEM if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
 	select PERF_USE_VMALLOC
@@ -162,11 +171,6 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
-config HAVE_LATENCYTOP_SUPPORT
-	bool
-	depends on !SMP
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y
@@ -188,6 +192,9 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_HAS_BANDGAP
 	bool
 
+config FIX_EARLYCON_MEM
+	def_bool y if MMU
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -236,7 +243,6 @@ config ARM_PATCH_PHYS_VIRT
 	bool "Patch physical to virtual translations at runtime" if EMBEDDED
 	default y
 	depends on !XIP_KERNEL && MMU
-	depends on !ARCH_REALVIEW || !SPARSEMEM
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
@@ -268,7 +274,6 @@ config PHYS_OFFSET
 	depends on !ARM_PATCH_PHYS_VIRT
 	default DRAM_BASE if !MMU
 	default 0x00000000 if ARCH_EBSA110 || \
-			EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
 			ARCH_FOOTBRIDGE || \
 			ARCH_INTEGRATOR || \
 			ARCH_IOP13XX || \
@@ -277,10 +282,7 @@ config PHYS_OFFSET
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 	default 0x20000000 if ARCH_S5PV210
 	default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
-	default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
-	default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
-	default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
-	default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	default 0xc0000000 if ARCH_SA1100
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -307,19 +309,26 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+config ARCH_MMAP_RND_BITS_MIN
+	default 8
+
+config ARCH_MMAP_RND_BITS_MAX
+	default 14 if PAGE_OFFSET=0x40000000
+	default 15 if PAGE_OFFSET=0x80000000
+	default 16
+
 #
 # The "ARM system type" choice list is ordered alphabetically by option
 # text.  Please add new entries in the option alphabetic order.
 #
 choice
 	prompt "ARM system type"
-	default ARCH_VERSATILE if !MMU
+	default ARM_SINGLE_ARMV7M if !MMU
 	default ARCH_MULTIPLATFORM if MMU
 
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
 	depends on MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
@@ -334,7 +343,6 @@ config ARCH_MULTIPLATFORM
 config ARM_SINGLE_ARMV7M
 	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
 	depends on !MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_NVIC
 	select AUTO_ZRELADDR
 	select CLKSRC_OF
@@ -345,58 +353,12 @@ config ARM_SINGLE_ARMV7M
 	select SPARSE_IRQ
 	select USE_OF
 
-config ARCH_REALVIEW
-	bool "ARM Ltd. RealView family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select COMMON_CLK
-	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PL061 if GPIOLIB
-	select ICST
-	select NEED_MACH_MEMORY_H
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_SCHED_CLOCK
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-config ARCH_VERSATILE
-	bool "ARM Ltd. Versatile family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select HAVE_MACH_CLKDEV
-	select ICST
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
-	select PLAT_VERSATILE_SCHED_CLOCK
-	select VERSATILE_FPGA_IRQ
-	help
-	  This enables support for ARM Ltd Versatile board.
-
-config ARCH_CLPS711X
-	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select ARCH_REQUIRE_GPIOLIB
-	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
-	select COMMON_CLK
-	select CPU_ARM720T
-	select GENERIC_CLOCKEVENTS
-	select MFD_SYSCON
-	select SOC_BUS
-	help
-	  Support for Cirrus Logic 711x/721x/731x based boards.
-
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_FA526
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -417,12 +379,15 @@ config ARCH_EBSA110
 config ARCH_EP93XX
 	bool "EP93xx-based"
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select ARM_AMBA
+	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
+	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select CPU_ARM920T
+	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -463,9 +428,9 @@ config ARCH_IOP13XX
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
+	select GPIOLIB
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -476,9 +441,9 @@ config ARCH_IOP32X
 config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
+	select GPIOLIB
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -489,12 +454,12 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
 	select USB_EHCI_BIG_ENDIAN_DESC
@@ -504,66 +469,26 @@ config ARCH_IXP4XX
 
 config ARCH_DOVE
 	bool "Marvell Dove"
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MIGHT_HAVE_PCI
+	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_MV78XX0
-	bool "Marvell MV78xx0"
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the following Marvell MV78xx0 series SoCs:
-	  MV781x0, MV782x0.
-
-config ARCH_ORION5X
-	bool "Marvell Orion"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	select MULTI_IRQ_HANDLER
-	help
-	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-	  Orion-2 (5281), Orion-1-90 (6183).
-
-config ARCH_MMP
-	bool "Marvell PXA168/910/MMP2"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select PINCTRL
-	select PLAT_PXA
 	select SPARSE_IRQ
+	select PM_GENERIC_DOMAINS if PM
 	help
-	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
+	  Support for the Marvell Dove SoC 88AP510
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_ARM922T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
@@ -571,11 +496,11 @@ config ARCH_KS8695
 
 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
 	  At present, the w90x900 has been renamed nuc900, regarding
@@ -587,13 +512,15 @@ config ARCH_W90X900
 
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_LPC32XX
+	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
+	select GPIOLIB
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
 	select USE_OF
 	help
 	  Support for the NXP LPC32XX family of processors
@@ -602,15 +529,17 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
+	select CLKSRC_PXA
 	select CLKSRC_MMIO
 	select CLKSRC_OF
+	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
@@ -619,30 +548,9 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_SHMOBILE_LEGACY
-	bool "Renesas ARM SoCs (non-multiplatform)"
-	select ARCH_SHMOBILE
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select MULTI_IRQ_HANDLER
-	select NO_IOPORT_MAP
-	select PINCTRL
-	select PM_GENERIC_DOMAINS if PM
-	select SH_CLK_CPG
-	select SPARSE_IRQ
-	help
-	  Support for Renesas ARM SoC platforms using a non-multiplatform
-	  kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
-	  and RZ families.
-
 config ARCH_RPC
 	bool "RiscPC"
+	depends on MMU
 	select ARCH_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
 	select ARCH_SPARSEMEM_ENABLE
@@ -655,7 +563,6 @@ config ARCH_RPC
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT_MAP
-	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -663,13 +570,15 @@ config ARCH_RPC
 config ARCH_SA1100
 	bool "SA1100-based"
 	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_PXA
+	select CLKSRC_OF if OF
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select ISA
@@ -681,12 +590,12 @@ config ARCH_SA1100
 
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
-	select ARCH_REQUIRE_GPIOLIB
 	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -699,42 +608,16 @@ config ARCH_S3C24XX
 	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
 	  Samsung SMDK2410 development board (and derivatives).
 
-config ARCH_S3C64XX
-	bool "Samsung S3C64XX"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_VIC
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK_SAMSUNG
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_TCM
-	select NO_IOPORT_MAP
-	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS if PM
-	select S3C_DEV_NAND
-	select S3C_GPIO_TRACK
-	select SAMSUNG_ATAGS
-	select SAMSUNG_WAKEMASK
-	select SAMSUNG_WDT_RESET
-	help
-	  Samsung S3C64XX series based systems
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CPU_ARM926T
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select HAVE_IDE
-	select TI_PRIV_EDMA
 	select USE_OF
 	select ZONE_DMA
 	help
@@ -745,11 +628,11 @@ config ARCH_OMAP1
 	depends on MMU
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
@@ -814,9 +697,12 @@ config ARCH_MULTI_CPU_AUTO
 endmenu
 
 config ARCH_VIRT
-	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
 	select ARM_PSCI
 	select HAVE_ARM_ARCH_TIMER
 
@@ -829,6 +715,8 @@ source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-alpine/Kconfig"
 
+source "arch/arm/mach-artpec/Kconfig"
+
 source "arch/arm/mach-asm9260/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -877,6 +765,8 @@ source "arch/arm/mach-meson/Kconfig"
 
 source "arch/arm/mach-moxart/Kconfig"
 
+source "arch/arm/mach-aspeed/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
@@ -906,6 +796,8 @@ source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
+source "arch/arm/mach-oxnas/Kconfig"
+
 source "arch/arm/mach-qcom/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
@@ -935,6 +827,8 @@ source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-prima2/Kconfig"
 
+source "arch/arm/mach-tango/Kconfig"
+
 source "arch/arm/mach-tegra/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
@@ -960,7 +854,7 @@ source "arch/arm/mach-zynq/Kconfig"
 config ARCH_EFM32
 	bool "Energy Micro efm32"
 	depends on ARM_SINGLE_ARMV7M
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
 	  processors.
@@ -982,10 +876,28 @@ config ARCH_STM32
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARMV7M_SYSTICK
 	select CLKSRC_STM32
+	select PINCTRL
 	select RESET_CONTROLLER
 	help
 	  Support for STMicroelectronics STM32 processors.
 
+config MACH_STM32F429
+	bool "STMicrolectronics STM32F429"
+	depends on ARCH_STM32
+	default y
+
+config ARCH_MPS2
+	bool "ARM MPS2 platform"
+	depends on ARM_SINGLE_ARMV7M
+	select ARM_AMBA
+	select CLKSRC_MPS2
+	help
+	  Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
+	  with a range of available cores like Cortex-M3/M4/M7.
+
+	  Please, note that depends which Application Note is used memory map
+	  for the platform may vary, so adjustment of RAM base might be needed.
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -1260,6 +1172,60 @@ config ARM_ERRATA_773022
 	  loop buffer may deliver incorrect instructions. This
 	  workaround disables the loop buffer to avoid the erratum.
 
+config ARM_ERRATA_818325_852422
+	bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for:
+	  - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM
+	    instruction might deadlock.  Fixed in r0p1.
+	  - Cortex-A12 852422: Execution of a sequence of instructions might
+	    lead to either a data corruption or a CPU deadlock.  Not fixed in
+	    any Cortex-A12 cores yet.
+	  This workaround for all both errata involves setting bit[12] of the
+	  Feature Register. This bit disables an optimisation applied to a
+	  sequence of 2 instructions that use opposing condition codes.
+
+config ARM_ERRATA_821420
+	bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 821420 Cortex-A12
+	  (all revs) erratum. In very rare timing conditions, a sequence
+	  of VMOV to Core registers instructions, for which the second
+	  one is in the shadow of a branch or abort, can lead to a
+	  deadlock when the VMOV instructions are issued out-of-order.
+
+config ARM_ERRATA_825619
+	bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 825619 Cortex-A12
+	  (all revs) erratum. Within rare timing constraints, executing a
+	  DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable
+	  and Device/Strongly-Ordered loads and stores might cause deadlock
+
+config ARM_ERRATA_852421
+	bool "ARM errata: A17: DMB ST might fail to create order between stores"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 852421 Cortex-A17
+	  (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions,
+	  execution of a DMB ST instruction might fail to properly order
+	  stores from GroupA and stores from GroupB.
+
+config ARM_ERRATA_852423
+	bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for:
+	  - Cortex-A17 852423: Execution of a sequence of instructions might
+	    lead to either a data corruption or a CPU deadlock.  Not fixed in
+	    any Cortex-A17 cores yet.
+	  This is identical to Cortex-A12 erratum 852422.  It is a separate
+	  config option from the A12 erratum due to the way errata are checked
+	  for and handled.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1315,7 +1281,6 @@ config PCI_HOST_ITE8152
 	select DMABOUNCE
 
 source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
@@ -1408,7 +1373,6 @@ config HAVE_ARM_ARCH_TIMER
 
 config HAVE_ARM_TWD
 	bool
-	depends on SMP
 	select CLKSRC_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
@@ -1440,8 +1404,7 @@ config BIG_LITTLE
 
 config BL_SWITCHER
 	bool "big.LITTLE switcher support"
-	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
-	select ARM_CPU_SUSPEND
+	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
 	select CPU_PM
 	help
 	  The big.LITTLE "switcher" provides the core functionality to
@@ -1468,6 +1431,8 @@ choice
 
 	config VMSPLIT_3G
 		bool "3G/1G user/kernel split"
+	config VMSPLIT_3G_OPT
+		bool "3G/1G user/kernel split (for full 1G low memory)"
 	config VMSPLIT_2G
 		bool "2G/2G user/kernel split"
 	config VMSPLIT_1G
@@ -1479,6 +1444,7 @@ config PAGE_OFFSET
 	default PHYS_OFFSET if !MMU
 	default 0x40000000 if VMSPLIT_1G
 	default 0x80000000 if VMSPLIT_2G
+	default 0xB0000000 if VMSPLIT_3G_OPT
 	default 0xC0000000
 
 config NR_CPUS
@@ -1496,7 +1462,8 @@ config HOTPLUG_CPU
 
 config ARM_PSCI
 	bool "Support for the ARM Power State Coordination Interface (PSCI)"
-	depends on CPU_V7
+	depends on HAVE_ARM_SMCCC
+	select ARM_PSCI_FW
 	help
 	  Say Y here if you want Linux to communicate with system firmware
 	  implementing the PSCI specification for CPU-centric power
@@ -1531,7 +1498,6 @@ config HZ_FIXED
 	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default 128 if SOC_AT91RM9200
-	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
 	default 0
 
 choice
@@ -1619,6 +1585,24 @@ config THUMB2_AVOID_R_ARM_THM_JUMP11
 config ARM_ASM_UNIFIED
 	bool
 
+config ARM_PATCH_IDIV
+	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
+	depends on CPU_32v7 && !XIP_KERNEL
+	default y
+	help
+	  The ARM compiler inserts calls to __aeabi_idiv() and
+	  __aeabi_uidiv() when it needs to perform division on signed
+	  and unsigned integers. Some v7 CPUs have support for the sdiv
+	  and udiv instructions that can be used to implement those
+	  functions.
+
+	  Enabling this option allows the kernel to modify itself to
+	  replace the first two instructions of these library functions
+	  with the sdiv or udiv plus "bx lr" instructions when the CPU
+	  it is running on supports them. Typically this will be faster
+	  and less power intensive than running the original library
+	  code to do integer division.
+
 config AEABI
 	bool "Use the ARM EABI to compile the kernel"
 	help
@@ -1692,8 +1676,9 @@ config HIGHMEM
 	  If unsure, say n.
 
 config HIGHPTE
-	bool "Allocate 2nd-level pagetables from highmem"
+	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
 	depends on HIGHMEM
+	default y
 	help
 	  The VM uses one page of physical memory for each page table.
 	  For systems with a lot of processes, this can use a lot of
@@ -1701,13 +1686,24 @@ config HIGHPTE
 	  consumed by page tables.  Setting this option will allow
 	  user-space 2nd level page tables to reside in high memory.
 
-config HW_PERF_EVENTS
-	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS
+config CPU_SW_DOMAIN_PAN
+	bool "Enable use of CPU domains to implement privileged no-access"
+	depends on MMU && !ARM_LPAE
 	default y
 	help
-	  Enable hardware performance counter support for perf events. If
-	  disabled, perf events will use software events only.
+	  Increase kernel security by ensuring that normal kernel accesses
+	  are unable to access userspace addresses.  This can help prevent
+	  use-after-free bugs becoming an exploitable privilege escalation
+	  by ensuring that magic values (such as LIST_POISON) will always
+	  fault when dereferenced.
+
+	  CPUs with low-vector mappings use a best-efforts implementation.
+	  Their lower 1MB needs to remain accessible for the vectors, but
+	  the remainder of userspace will become appropriately inaccessible.
+
+config HW_PERF_EVENTS
+	def_bool y
+	depends on ARM_PMU
 
 config SYS_SUPPORTS_HUGETLBFS
        def_bool y
@@ -1738,8 +1734,7 @@ config ARM_MODULE_PLTS
 source "mm/Kconfig"
 
 config FORCE_MAX_ZONEORDER
-	int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
-	range 11 64 if ARCH_SHMOBILE_LEGACY
+	int "Maximum zone order"
 	default "12" if SOC_AM33XX
 	default "9" if SA1111 || ARCH_EFM32
 	default "11"
@@ -1804,6 +1799,25 @@ config SWIOTLB
 config IOMMU_HELPER
 	def_bool SWIOTLB
 
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
+
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	select PARAVIRT
+	default n
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
+
+	  If in doubt, say N here.
+
 config XEN_DOM0
 	def_bool y
 	depends on XEN
@@ -1817,6 +1831,7 @@ config XEN
 	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_PSCI
 	select SWIOTLB_XEN
+	select PARAVIRT
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
@@ -1828,8 +1843,6 @@ config USE_OF
 	bool "Flattened Device Tree support"
 	select IRQ_DOMAIN
 	select OF
-	select OF_EARLY_FLATTREE
-	select OF_RESERVED_MEM
 	help
 	  Include support for flattened device tree machine descriptions.
 
@@ -2006,6 +2019,7 @@ config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on (!SMP || PM_SLEEP_SMP)
 	depends on !CPU_V7M
+	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -2045,6 +2059,25 @@ config AUTO_ZRELADDR
 	  0xf8000000. This assumes the zImage being placed in the first 128MB
 	  from start of memory.
 
+config EFI_STUB
+	bool
+
+config EFI
+	bool "UEFI runtime support"
+	depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
+	select UCS2_STRING
+	select EFI_PARAMS_FROM_FDT
+	select EFI_STUB
+	select EFI_ARMSTUB
+	select EFI_RUNTIME_WRAPPERS
+	---help---
+	  This option provides support for runtime services provided
+	  by UEFI firmware (such as non-volatile variables, realtime
+	  clock, and platform reset). A UEFI stub is also provided to
+	  allow the kernel to be booted as an EFI application. This
+	  is only useful for kernels that may run on systems that have
+	  UEFI firmware.
+
 endmenu
 
 menu "CPU Power Management"
@@ -2145,7 +2178,8 @@ config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 
 config ARM_CPU_SUSPEND
-	def_bool PM_SLEEP
+	def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
+	depends on ARCH_SUSPEND_POSSIBLE
 
 config ARCH_HIBERNATION_POSSIBLE
 	bool
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a2e16f940..a9693b698 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -15,20 +15,6 @@ config ARM_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	depends on MMU
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
-
-          If in doubt, say Y.
-
 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to
@@ -123,32 +109,55 @@ choice
 		    0x80020000      | 0xf0020000     | UART8
 		    0x80024000      | 0xf0024000     | UART9
 
-	config AT91_DEBUG_LL_DBGU0
-		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
+	config DEBUG_AT91_RM9200_DBGU
+		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
 		select DEBUG_AT91_UART
-		depends on ARCH_AT91
 		depends on SOC_AT91RM9200 || SOC_AT91SAM9
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
 
-	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
+	config DEBUG_AT91_SAM9263_DBGU
+		bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
 		select DEBUG_AT91_UART
-		depends on ARCH_AT91
-		depends on SOC_AT91SAM9 || SOC_SAMA5
+		depends on SOC_AT91SAM9 || SOC_SAMA5D3
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91sam9263, at91sam9g45, at91sam9m10,
+		    sama5d3
 
-	config AT91_DEBUG_LL_DBGU2
-		bool "Kernel low-level debugging on sama5d4"
+	config DEBUG_AT91_SAMA5D2_UART1
+		bool "Kernel low-level debugging on SAMA5D2 UART1"
 		select DEBUG_AT91_UART
-		depends on ARCH_AT91
-		depends on SOC_SAMA5
+		depends on SOC_SAMA5D2
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the UART1 port of sama5d2.
+
+	config DEBUG_AT91_SAMA5D4_USART3
+		bool "Kernel low-level debugging on SAMA5D4 USART3"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA5D4
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the USART3 port of sama5d4.
 
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
-		depends on ARCH_BCM2835
+		depends on ARCH_BCM2835 && ARCH_MULTI_V6
+		select DEBUG_UART_PL01X
+
+	config DEBUG_BCM2836
+		bool "Kernel low-level debugging on BCM2836 PL011 UART"
+		depends on ARCH_BCM2835 && ARCH_MULTI_V7
 		select DEBUG_UART_PL01X
 
 	config DEBUG_BCM_5301X
-		bool "Kernel low-level debugging on BCM5301X UART1"
-		depends on ARCH_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
 		select DEBUG_UART_8250
 
 	config DEBUG_BCM_KONA_UART
@@ -162,10 +171,9 @@ choice
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
-	config DEBUG_BCM63XX
+	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
 		depends on ARCH_BCM_63XX
-		select DEBUG_UART_BCM63XX
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -232,23 +240,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART0 serial port on DaVinci DMx devices.
 
-	config DEBUG_ZYNQ_UART0
-		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
-		depends on ARCH_ZYNQ
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 on the Zynq platform.
-
-	config DEBUG_ZYNQ_UART1
-		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
-		depends on ARCH_ZYNQ
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART1 on the Zynq platform.
-
-		  If you have a ZC702 board and want early boot messages to
-		  appear on the USB serial adaptor, select this option.
-
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -263,28 +254,37 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the UA0 serial port in the CX92755.
 
+	config DEBUG_EP93XX
+		bool "Kernel low-level debugging messages via ep93xx UART"
+		depends on ARCH_EP93XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Cirrus Logic EP93xx based platforms.
+
 	config DEBUG_FOOTBRIDGE_COM1
 		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
 		depends on FOOTBRIDGE
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the 8250 at PCI COM1.
 
-	config DEBUG_HI3620_UART
-		bool "Hisilicon HI3620 Debug UART"
-		depends on ARCH_HI3xxx
-		select DEBUG_UART_PL01X
+	config DEBUG_GEMINI
+		bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
+		depends on ARCH_GEMINI
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on HI3620 UART.
+		  on Cortina Gemini based platforms.
 
-	config DEBUG_HI3716_UART
-		bool "Hisilicon Hi3716 Debug UART"
+	config DEBUG_HI3620_UART
+		bool "Hisilicon HI3620 Debug UART"
 		depends on ARCH_HI3xxx
 		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on HI3716 UART.
+		  on HI3620 UART.
 
 	config DEBUG_HIGHBANK_UART
 		bool "Kernel low-level debugging messages via Highbank UART"
@@ -411,6 +411,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6SX.
 
+	config DEBUG_IMX6UL_UART
+		bool "i.MX6UL Debug UART"
+		depends on SOC_IMX6UL
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6UL.
+
 	config DEBUG_IMX7D_UART
 		bool "i.MX7D Debug UART"
 		depends on SOC_IMX7D
@@ -418,6 +425,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX7D.
 
+	config DEBUG_INTEGRATOR
+		bool "Kernel low-level debugging messages via ARM Integrator UART"
+		depends on ARCH_INTEGRATOR
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ARM Integrator platforms.
+
 	config DEBUG_KEYSTONE_UART0
 		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 		depends on ARCH_KEYSTONE
@@ -449,6 +464,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on NXP LPC18xx/43xx UART0.
 
+	config DEBUG_LPC32XX
+		bool "Kernel low-level debugging messages via NXP LPC32xx UART"
+		depends on ARCH_LPC32XX
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on NXP LPC32xx based platforms.
+
 	config DEBUG_MESON_UARTAO
 		bool "Kernel low-level debugging via Meson6 UARTAO"
 		depends on ARCH_MESON
@@ -472,26 +495,10 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MMP UART3.
 
-	config DEBUG_QCOM_UARTDM
-		bool "Kernel low-level debugging messages via QCOM UARTDM"
-		depends on ARCH_QCOM
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on Qualcomm devices.
-
-		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
-		  APQ8064   0x16640000        0xf0040000
-		  APQ8084   0xf995e000        0xfa75e000
-		  MSM8X60   0x19c40000        0xf0040000
-		  MSM8960   0x16440000        0xf0040000
-		  MSM8974   0xf991e000        0xfa71e000
-
-		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
-		  options based on your needs.
-
 	config DEBUG_MVEBU_UART0
 		bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
 		depends on ARCH_MVEBU
+		depends on ARCH_MVEBU && CPU_V7
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
@@ -504,17 +511,23 @@ choice
 		  Plathome OpenBlocks AX3, when using the original
 		  bootloader.
 
+		  This option will not work on older Marvell platforms
+		  (Kirkwood, Dove, MV78xx0, Orion5x), which should pick
+		  the "new bootloader" variant.
+
 		  If the wrong DEBUG_MVEBU_UART* option is selected,
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
 	config DEBUG_MVEBU_UART0_ALTERNATE
 		bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
-		depends on ARCH_MVEBU
+		depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on MVEBU based platforms on UART0.
+		  on MVEBU based platforms on UART0. (Armada XP, Armada 3xx,
+		  Kirkwood, Dove, MV78xx0, Orion5x).
+
 
 		  This option should be used with the new bootloaders
 		  that remap the internal registers at 0xf1000000.
@@ -529,21 +542,41 @@ choice
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on MVEBU based platforms on UART1.
+		  on MVEBU based platforms on UART1. (Armada XP, Armada 3xx,
+		  Kirkwood, Dove, MV78xx0, Orion5x).
 
 		  This option should be used with the new bootloaders
 		  that remap the internal registers at 0xf1000000.
+		  All of the older (pre Armada XP/370) platforms also use
+		  this address, regardless of the boot loader version.
 
 		  If the wrong DEBUG_MVEBU_UART* option is selected,
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
-	config DEBUG_VF_UART
-		bool "Vybrid UART"
-		depends on SOC_VF610
+	config DEBUG_MT6589_UART0
+		bool "Mediatek mt6589 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on Vybrid based platforms.
+		  for Mediatek mt6589 based platforms on UART0.
+
+	config DEBUG_MT8127_UART0
+		bool "Mediatek mt8127/mt6592 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt8127 based platforms on UART0.
+
+	config DEBUG_MT8135_UART3
+		bool "Mediatek mt8135 UART3"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt8135 based platforms on UART3.
 
 	config DEBUG_NETX_UART
 		bool "Kernel low-level debugging messages via NetX UART"
@@ -707,6 +740,23 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on PXA UART1.
 
+	config DEBUG_QCOM_UARTDM
+		bool "Kernel low-level debugging messages via QCOM UARTDM"
+		depends on ARCH_QCOM
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on Qualcomm devices.
+
+		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
+		  APQ8064   0x16640000        0xf0040000
+		  APQ8084   0xf995e000        0xfa75e000
+		  MSM8X60   0x19c40000        0xf0040000
+		  MSM8960   0x16440000        0xf0040000
+		  MSM8974   0xf991e000        0xfa71e000
+
+		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+		  options based on your needs.
+
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
 		depends on ARCH_REALVIEW
@@ -850,6 +900,7 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
 		help
@@ -861,6 +912,7 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
 		help
@@ -872,6 +924,7 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
 		help
@@ -882,6 +935,7 @@ choice
 	config DEBUG_S3C_UART3
 		depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 3 for low-level debug"
 		help
@@ -973,6 +1027,70 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A31/A23 based platforms on the R_UART.
 
+	config DEBUG_SIRFPRIMA2_UART1
+		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
+		depends on ARCH_PRIMA2
+		select DEBUG_SIRFSOC_UART
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFprimaII devices.
+
+	config DEBUG_SIRFATLAS7_UART0
+		bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
+		depends on ARCH_ATLAS7
+		select DEBUG_SIRFSOC_UART
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart0 port on SiRFATLAS7 devices.The uart0
+		  is used on SiRFATLAS7 as a extra debug port.sometimes an extra
+		  debug port can be very useful.
+
+	config DEBUG_SIRFATLAS7_UART1
+		bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
+		depends on ARCH_ATLAS7
+		select DEBUG_SIRFSOC_UART
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFATLAS7 devices.
+
+	config DEBUG_SPEAR3XX
+		bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
+		depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ST SPEAr based platforms.
+
+	config DEBUG_SPEAR13XX
+		bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
+		depends on ARCH_SPEAR13XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ST SPEAr13xx based platforms.
+
+	config STIH41X_DEBUG_ASC2
+		bool "Use StiH415/416 ASC2 UART for low-level debug"
+		depends on ARCH_STI
+		select DEBUG_STI_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2000, which has
+		  default UART wired up to ASC2.
+
+		  If unsure, say N.
+
+	config STIH41X_DEBUG_SBC_ASC1
+		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
+		depends on ARCH_STI
+		select DEBUG_STI_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2020. which has
+		  default UART wired up to SBC ASC1.
+
+		  If unsure, say N.
+
 	config TEGRA_DEBUG_UART_AUTO_ODMDATA
 		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
 		depends on ARCH_TEGRA
@@ -1025,54 +1143,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
-	config DEBUG_SIRFPRIMA2_UART1
-		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
-		depends on ARCH_PRIMA2
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFprimaII devices.
-
-	config DEBUG_SIRFATLAS7_UART0
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart0 port on SiRFATLAS7 devices.The uart0
-		  is used on SiRFATLAS7 as a extra debug port.sometimes an extra
-		  debug port can be very useful.
-
-	config DEBUG_SIRFATLAS7_UART1
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFATLAS7 devices.
-
-	config STIH41X_DEBUG_ASC2
-		bool "Use StiH415/416 ASC2 UART for low-level debug"
-		depends on ARCH_STI
-		select DEBUG_STI_UART
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2000, which has
-		  default UART wired up to ASC2.
-
-		  If unsure, say N.
-
-	config STIH41X_DEBUG_SBC_ASC1
-		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
-		depends on ARCH_STI
-		select DEBUG_STI_UART
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2020. which has
-		  default UART wired up to SBC ASC1.
-
-		  If unsure, say N.
-
 	config DEBUG_U300_UART
 		bool "Kernel low-level debugging messages via U300 UART0"
 		depends on ARCH_U300
@@ -1088,29 +1158,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Ux500 based platforms.
 
-	config DEBUG_MT6589_UART0
-		bool "Mediatek mt6589 UART0"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt6589 based platforms on UART0.
-
-	config DEBUG_MT8127_UART0
-		bool "Mediatek mt8127/mt6592 UART0"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt8127 based platforms on UART0.
-
-	config DEBUG_MT8135_UART3
-		bool "Mediatek mt8135 UART3"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
+	config DEBUG_VERSATILE
+		bool "Kernel low-level debugging messages via ARM Versatile UART"
+		depends on ARCH_VERSATILE
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt8135 based platforms on UART3.
+		  on ARM Versatile platforms.
 
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
@@ -1148,6 +1202,13 @@ choice
 		  This option selects UART0 at 0xb0090000. This is appropriate for
 		  Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
 
+	config DEBUG_VF_UART
+		bool "Vybrid UART"
+		depends on SOC_VF610
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Vybrid based platforms.
+
 	config DEBUG_VT8500_UART0
 		bool "Use UART0 on VIA/Wondermedia SoCs"
 		depends on ARCH_VT8500
@@ -1155,6 +1216,35 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
+	config DEBUG_ZTE_ZX
+		bool "Use ZTE ZX UART"
+		select DEBUG_UART_PL01X
+		depends on ARCH_ZX
+		help
+		  Say Y here if you are enabling ZTE ZX296702 SOC and need
+		  debug uart support.
+
+		  This option is preferred over the platform specific
+		  options; the platform specific options are deprecated
+		  and will be soon removed.
+
+	config DEBUG_ZYNQ_UART0
+		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+		depends on ARCH_ZYNQ
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART0 on the Zynq platform.
+
+	config DEBUG_ZYNQ_UART1
+		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+		depends on ARCH_ZYNQ
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 on the Zynq platform.
+
+		  If you have a ZC702 board and want early boot messages to
+		  appear on the USB serial adaptor, select this option.
+
 	config DEBUG_ICEDCC
 		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 		help
@@ -1182,18 +1272,6 @@ choice
 		  For more details about semihosting, please see
 		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
 
-	config DEBUG_ZTE_ZX
-		bool "Use ZTE ZX UART"
-		select DEBUG_UART_PL01X
-		depends on ARCH_ZX
-		help
-		  Say Y here if you are enabling ZTE ZX296702 SOC and need
-		  debug uart support.
-
-		  This option is preferred over the platform specific
-		  options; the platform specific options are deprecated
-		  and will be soon removed.
-
 	config DEBUG_LL_UART_8250
 		bool "Kernel low-level debugging via 8250 UART"
 		help
@@ -1250,6 +1328,9 @@ config DEBUG_S3C2410_UART
 config DEBUG_S3C24XX_UART
 	bool
 
+config DEBUG_S3C64XX_UART
+	bool
+
 config DEBUG_S5PV210_UART
 	bool
 
@@ -1269,6 +1350,7 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX6Q_UART || \
 						DEBUG_IMX6SL_UART || \
 						DEBUG_IMX6SX_UART || \
+						DEBUG_IMX6UL_UART || \
 						DEBUG_IMX7D_UART
 	default 1
 	depends on ARCH_MXC
@@ -1300,10 +1382,12 @@ config DEBUG_SIRFSOC_UART
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/sa1100.S" if DEBUG_SA1100
+	default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	default "debug/at91.S" if DEBUG_AT91_UART
 	default "debug/asm9260.S" if DEBUG_ASM9260_UART
 	default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
+	default "debug/dc21285.S" if DEBUG_DC21285_PORT
 	default "debug/meson.S" if DEBUG_MESON_UARTAO
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
@@ -1320,6 +1404,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
+				 DEBUG_IMX6UL_UART || \
 				 DEBUG_IMX7D_UART
 	default "debug/ks8695.S" if DEBUG_KS8695_UART
 	default "debug/msm.S" if DEBUG_QCOM_UARTDM
@@ -1333,7 +1418,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
 	default "debug/sti.S" if DEBUG_STI_UART
@@ -1343,7 +1428,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "mach/debug-macro.S"
 
@@ -1353,15 +1438,9 @@ config DEBUG_UART_PL01X
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_DOVE || ARCH_EBSA110 || \
-		(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
-		ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
-		ARCH_IOP33X || ARCH_IXP4XX || \
-		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
-
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
-	def_bool ARCH_BCM_63XX
+	def_bool ARCH_EBSA110 || \
+		ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
+		ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
@@ -1382,12 +1461,12 @@ config DEBUG_UART_PHYS
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0x10124000 if DEBUG_RK3X_UART0
 	default 0x10126000 if DEBUG_RK3X_UART1
-	default 0x101f1000 if ARCH_VERSATILE
+	default 0x101f1000 if DEBUG_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
 	default 0x11002000 if DEBUG_MT8127_UART0
 	default 0x11006000 if DEBUG_MT6589_UART0
 	default 0x11009000 if DEBUG_MT8135_UART3
-	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x16000000 if DEBUG_INTEGRATOR
 	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x18010000 if DEBUG_SIRFATLAS7_UART0
 	default 0x18020000 if DEBUG_SIRFATLAS7_UART1
@@ -1397,12 +1476,13 @@ config DEBUG_UART_PHYS
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0x20201000 if DEBUG_BCM2835
+	default 0x3f201000 if DEBUG_BCM2836
 	default 0x3e000000 if DEBUG_BCM_KONA_UART
 	default 0x4000e400 if DEBUG_LL_UART_EFM32
 	default 0x40081000 if DEBUG_LPC18XX_UART0
-	default 0x40090000 if ARCH_LPC32XX
+	default 0x40090000 if DEBUG_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
-	default 0x42000000 if ARCH_GEMINI
+	default 0x42000000 if DEBUG_GEMINI
 	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
 				DEBUG_S3C2410_UART0)
 	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
@@ -1410,24 +1490,28 @@ config DEBUG_UART_PHYS
 	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
 				DEBUG_S3C2410_UART2)
 	default 0x78000000 if DEBUG_CNS3XXX
-	default 0x7c0003f8 if FOOTBRIDGE
+	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
+	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+	default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+	default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
 	default 0x80010000 if DEBUG_ASM9260_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
 	default 0x80230000 if DEBUG_PICOXCELL_UART
-	default 0x808c0000 if ARCH_EP93XX
+	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
 	default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
 	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
-	default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
+	default 0xd0000000 if DEBUG_SPEAR3XX
 	default 0xd0012000 if DEBUG_MVEBU_UART0
 	default 0xc81004c0 if DEBUG_MESON_UARTAO
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
-	default 0xe0000000 if ARCH_SPEAR13XX
+	default 0xe0000000 if DEBUG_SPEAR13XX
 	default 0xe4007000 if DEBUG_HIP04_UART
 	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
 	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
@@ -1439,11 +1523,11 @@ config DEBUG_UART_PHYS
 	default 0xf040ab00 if DEBUG_BRCMSTB_UART
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
-				ARCH_ORION5X
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
+	default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf8b00000 if DEBUG_HIX5HD2_UART
 	default 0xf991e000 if DEBUG_QCOM_UARTDM
+	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe800000 if ARCH_IOP32X
@@ -1457,7 +1541,9 @@ config DEBUG_UART_PHYS
 	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfffe8600 if DEBUG_UART_BCM63XX
+	default 0xfffe8600 if DEBUG_BCM63XX_UART
+	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
 	default 0xfffff700 if ARCH_IOP33X
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1469,8 +1555,10 @@ config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+		DEBUG_S3C64XX_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1479,44 +1567,51 @@ config DEBUG_UART_VIRT
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf0010000 if DEBUG_ASM9260_UART
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
-	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
 	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf1002000 if DEBUG_MT8127_UART0
 	default 0xf1006000 if DEBUG_MT6589_UART0
 	default 0xf1009000 if DEBUG_MT8135_UART3
-	default 0xf11f1000 if ARCH_VERSATILE
-	default 0xf1600000 if ARCH_INTEGRATOR
+	default 0xf11f1000 if DEBUG_VERSATILE
+	default 0xf1600000 if DEBUG_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
 	default 0xf1c28400 if DEBUG_SUNXI_UART1
 	default 0xf1f02800 if DEBUG_SUNXI_R_UART
+	default 0xf31004c0 if DEBUG_MESON_UARTAO
+	default 0xf4090000 if DEBUG_LPC32XX
+	default 0xf4200000 if DEBUG_GEMINI
 	default 0xf6200000 if DEBUG_PXA_UART1
-	default 0xf4090000 if ARCH_LPC32XX
-	default 0xf4200000 if ARCH_GEMINI
 	default 0xf7000000 if DEBUG_SUN9I_UART0
+	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
 	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
 				DEBUG_S3C2410_UART0)
+	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
 	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
 				DEBUG_S3C2410_UART1)
 	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
 				DEBUG_S3C2410_UART2)
+	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
-	default 0xfcfe8600 if DEBUG_UART_BCM63XX
-	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
-	default 0xfd000000 if ARCH_SPEAR13XX
-	default 0xfd012000 if ARCH_MV78XX0
+	default 0xfcfe8600 if DEBUG_BCM63XX_UART
+	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+	default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0
 	default 0xfd883000 if DEBUG_ALPINE_UART0
-	default 0xfde12000 if ARCH_DOVE
-	default 0xfe012000 if ARCH_ORION5X
-	default 0xf31004c0 if DEBUG_MESON_UARTAO
+	default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE
+	default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@@ -1530,7 +1625,7 @@ config DEBUG_UART_VIRT
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
 	default 0xfec02000 if DEBUG_SOCFPGA_UART0
 	default 0xfec02100 if DEBUG_SOCFPGA_UART1
-	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
+	default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
 	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
@@ -1542,8 +1637,8 @@ config DEBUG_UART_VIRT
 	default 0xfed60000 if DEBUG_RK29_UART0
 	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
-	default 0xfedc0000 if ARCH_EP93XX
-	default 0xfee003f8 if FOOTBRIDGE
+	default 0xfedc0000 if DEBUG_EP93XX
+	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
 	default 0xfee82340 if ARCH_IOP13XX
 	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
@@ -1560,13 +1655,15 @@ config DEBUG_UART_VIRT
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+		DEBUG_S3C64XX_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
 		DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
 	default 2
 
@@ -1574,18 +1671,27 @@ config DEBUG_UART_8250_WORD
 	bool "Use 32-bit accesses for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
-	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \
-		DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \
+	default y if DEBUG_PICOXCELL_UART || \
+		DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \
+		DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \
 		DEBUG_ALPINE_UART0 || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
 		DEBUG_DAVINCI_DA8XX_UART2 || \
 		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
 		DEBUG_BRCMSTB_UART
 
+config DEBUG_UART_8250_PALMCHIP
+	bool "8250 UART is Palmchip BK-310x"
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	help
+	  Palmchip provides a UART implementation compatible with 16550
+	  except for having a different register layout.  Say Y here if
+	  the debug UART is of this type.
+
 config DEBUG_UART_8250_FLOW_CONTROL
 	bool "Enable flow control for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
+	default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
 
 config DEBUG_UNCOMPRESS
 	bool
@@ -1606,8 +1712,7 @@ config DEBUG_UNCOMPRESS
 config UNCOMPRESS_INCLUDE
 	string
 	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
-					ARCH_SHMOBILE_LEGACY
+					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7451b447c..61f6ccc19 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -30,9 +30,8 @@ GZFLAGS		:=-9
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
-# Do not use arch/arm/defconfig - it's always outdated.
-# Select a platform tht is kept up-to-date
-KBUILD_DEFCONFIG := versatile_defconfig
+# This should work on most of the modern platforms
+KBUILD_DEFCONFIG := multi_v7_defconfig
 
 # defines filename extension depending memory management type.
 ifeq ($(CONFIG_MMU),)
@@ -54,6 +53,14 @@ AS		+= -EL
 LD		+= -EL
 endif
 
+#
+# The Scalar Replacement of Aggregates (SRA) optimization pass in GCC 4.9 and
+# later may result in code being generated that handles signed short and signed
+# char struct members incorrectly. So disable it.
+# (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932)
+#
+KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
+
 # This selects which instruction set is used.
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
@@ -133,7 +140,6 @@ head-y		:= arch/arm/kernel/head$(MMUEXT).o
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
 textofs-y	:= 0x00008000
-textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # We don't want the htc bootloader to corrupt kernel during resume
 textofs-$(CONFIG_PM_H1940)      := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
@@ -147,6 +153,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
+machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
@@ -175,6 +182,7 @@ machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
+machine-$(CONFIG_ARCH_MPS2)		+= vexpress
 machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
@@ -203,6 +211,7 @@ machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
+machine-$(CONFIG_ARCH_TANGO)		+= tango
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
@@ -251,12 +260,14 @@ machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
 platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
 
 ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
 ifeq ($(KBUILD_SRC),)
 KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
 else
 KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
 endif
 endif
+endif
 
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
@@ -317,6 +328,7 @@ zImage: Image
 
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
 $(INSTALL_TARGETS):
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
@@ -344,7 +356,6 @@ archclean:
 
 # My testing targets (bypasses dependencies)
 bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
-i zi:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
 
 define archhelp
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 9eca7aee9..bdc1d5af0 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -31,7 +31,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y)
 
 $(obj)/xipImage: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	@$(kecho) '  Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -46,14 +46,12 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -78,17 +76,14 @@ fi
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	@$(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
-	@:
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
 
-PHONY += initrd FORCE
+PHONY += initrd install zinstall uinstall
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)
@@ -107,12 +102,4 @@ uinstall:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/uImage System.map "$(INSTALL_PATH)"
 
-zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 5761f0039..5e4acd253 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -17,7 +17,6 @@ targets	:= bootp init.o kernel.o initrd.o
 # Note that bootp.lds picks up kernel.o and initrd.o
 $(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FORCE
 	$(call if_changed,ld)
-	@:
 
 # kernel.o and initrd.o includes a binary image using
 # .incbin, a dependency which is not tracked automatically
@@ -26,4 +25,4 @@ $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
 $(obj)/initrd.o: $(INITRD) FORCE
 
-PHONY += $(INITRD) FORCE
+PHONY += $(INITRD)
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 0714e0334..86b2f5d28 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -3,11 +3,7 @@ bswapsdi2.S
 font.c
 lib1funcs.S
 hyp-stub.S
-piggy.gzip
-piggy.lzo
-piggy.lzma
-piggy.xzkern
-piggy.lz4
+piggy_data
 vmlinux
 vmlinux.lds
 
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 7a13aebac..d50430c40 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -51,10 +51,6 @@ else
 endif
 endif
 
-ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y)
-OBJS		+= head-shmobile.o
-endif
-
 #
 # We now have a PIC decompressor implementation.  Decompressors running
 # from RAM should not define ZTEXTADDR.  Decompressors running directly
@@ -70,11 +66,11 @@ endif
 
 CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
 
-suffix_$(CONFIG_KERNEL_GZIP) = gzip
-suffix_$(CONFIG_KERNEL_LZO)  = lzo
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-suffix_$(CONFIG_KERNEL_XZ)   = xzkern
-suffix_$(CONFIG_KERNEL_LZ4)  = lz4
+compress-$(CONFIG_KERNEL_GZIP) = gzip
+compress-$(CONFIG_KERNEL_LZO)  = lzo
+compress-$(CONFIG_KERNEL_LZMA) = lzma
+compress-$(CONFIG_KERNEL_XZ)   = xzkern
+compress-$(CONFIG_KERNEL_LZ4)  = lz4
 
 # Borrowed libfdt files for the ATAG compatibility mode
 
@@ -93,15 +89,12 @@ ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
 
-targets       := vmlinux vmlinux.lds \
-		 piggy.$(suffix_y) piggy.$(suffix_y).o \
-		 lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
-		 bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
+targets       := vmlinux vmlinux.lds piggy_data piggy.o \
+		 lib1funcs.o ashldi3.o bswapsdi2.o \
+		 head.o $(OBJS)
 
-# Make sure files are removed during clean
-extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
-		 lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \
-		 hyp-stub.S
+clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \
+		$(libfdt) $(libfdt_hdrs) hyp-stub.S
 
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
@@ -110,6 +103,15 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
+# -fstack-protector-strong triggers protection checks in this code,
+# but it is being used too early to link to meaningful stack_chk logic.
+nossp_flags := $(call cc-option, -fno-stack-protector)
+CFLAGS_atags_to_fdt.o := $(nossp_flags)
+CFLAGS_fdt.o := $(nossp_flags)
+CFLAGS_fdt_ro.o := $(nossp_flags)
+CFLAGS_fdt_rw.o := $(nossp_flags)
+CFLAGS_fdt_wip.o := $(nossp_flags)
+
 ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
 asflags-y := -DZIMAGE
 
@@ -171,22 +173,26 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
 	false; \
 fi
 
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
 		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) FORCE
+		$(bswapsdi2) $(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
 
-$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
-	$(call if_changed,$(suffix_y))
+$(obj)/piggy_data: $(obj)/../Image FORCE
+	$(call if_changed,$(compress-y))
 
-$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
+$(obj)/piggy.o: $(obj)/piggy_data
 
 CFLAGS_font.o := -Dstatic=
 
 $(obj)/font.c: $(FONTC)
 	$(call cmd,shipped)
 
+AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
+
 $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
 	$(call cmd,shipped)
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
new file mode 100644
index 000000000..9d5dc4fda
--- /dev/null
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2013-2015 Linaro Ltd
+ * Authors: Roy Franz <roy.franz@linaro.org>
+ *          Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	__nop
+#ifdef CONFIG_EFI_STUB
+		@ This is almost but not quite a NOP, since it does clobber the
+		@ condition flags. But it is the best we can do for EFI, since
+		@ PE/COFF expects the magic string "MZ" at offset 0, while the
+		@ ARM/Linux boot protocol expects an executable instruction
+		@ there.
+		.inst	'M' | ('Z' << 8) | (0x1310 << 16)   @ tstne r0, #0x4d000
+#else
+		mov	r0, r0
+#endif
+		.endm
+
+		.macro	__EFI_HEADER
+#ifdef CONFIG_EFI_STUB
+		b	__efi_start
+
+		.set	start_offset, __efi_start - start
+		.org	start + 0x3c
+		@
+		@ The PE header can be anywhere in the file, but for
+		@ simplicity we keep it together with the MSDOS header
+		@ The offset to the PE/COFF header needs to be at offset
+		@ 0x3C in the MSDOS header.
+		@ The only 2 fields of the MSDOS header that are used are this
+		@ PE/COFF offset, and the "MZ" bytes at offset 0x0.
+		@
+		.long	pe_header - start	@ Offset to the PE header.
+
+pe_header:
+		.ascii	"PE\0\0"
+
+coff_header:
+		.short	0x01c2			@ ARM or Thumb
+		.short	2			@ nr_sections
+		.long	0 			@ TimeDateStamp
+		.long	0			@ PointerToSymbolTable
+		.long	1			@ NumberOfSymbols
+		.short	section_table - optional_header
+						@ SizeOfOptionalHeader
+		.short	0x306			@ Characteristics.
+						@ IMAGE_FILE_32BIT_MACHINE |
+						@ IMAGE_FILE_DEBUG_STRIPPED |
+						@ IMAGE_FILE_EXECUTABLE_IMAGE |
+						@ IMAGE_FILE_LINE_NUMS_STRIPPED
+
+optional_header:
+		.short	0x10b			@ PE32 format
+		.byte	0x02			@ MajorLinkerVersion
+		.byte	0x14			@ MinorLinkerVersion
+		.long	_end - __efi_start	@ SizeOfCode
+		.long	0			@ SizeOfInitializedData
+		.long	0			@ SizeOfUninitializedData
+		.long	efi_stub_entry - start	@ AddressOfEntryPoint
+		.long	start_offset		@ BaseOfCode
+		.long	0			@ data
+
+extra_header_fields:
+		.long	0			@ ImageBase
+		.long	0x200			@ SectionAlignment
+		.long	0x200			@ FileAlignment
+		.short	0			@ MajorOperatingSystemVersion
+		.short	0			@ MinorOperatingSystemVersion
+		.short	0			@ MajorImageVersion
+		.short	0			@ MinorImageVersion
+		.short	0			@ MajorSubsystemVersion
+		.short	0			@ MinorSubsystemVersion
+		.long	0			@ Win32VersionValue
+
+		.long	_end - start		@ SizeOfImage
+		.long	start_offset		@ SizeOfHeaders
+		.long	0			@ CheckSum
+		.short	0xa			@ Subsystem (EFI application)
+		.short	0			@ DllCharacteristics
+		.long	0			@ SizeOfStackReserve
+		.long	0			@ SizeOfStackCommit
+		.long	0			@ SizeOfHeapReserve
+		.long	0			@ SizeOfHeapCommit
+		.long	0			@ LoaderFlags
+		.long	0x6			@ NumberOfRvaAndSizes
+
+		.quad	0			@ ExportTable
+		.quad	0			@ ImportTable
+		.quad	0			@ ResourceTable
+		.quad	0			@ ExceptionTable
+		.quad	0			@ CertificationTable
+		.quad	0			@ BaseRelocationTable
+
+section_table:
+		@
+		@ The EFI application loader requires a relocation section
+		@ because EFI applications must be relocatable. This is a
+		@ dummy section as far as we are concerned.
+		@
+		.ascii	".reloc\0\0"
+		.long	0			@ VirtualSize
+		.long	0			@ VirtualAddress
+		.long	0			@ SizeOfRawData
+		.long	0			@ PointerToRawData
+		.long	0			@ PointerToRelocations
+		.long	0			@ PointerToLineNumbers
+		.short	0			@ NumberOfRelocations
+		.short	0			@ NumberOfLineNumbers
+		.long	0x42100040		@ Characteristics
+
+		.ascii	".text\0\0\0"
+		.long	_end - __efi_start	@ VirtualSize
+		.long	__efi_start		@ VirtualAddress
+		.long	_edata - __efi_start	@ SizeOfRawData
+		.long	__efi_start		@ PointerToRawData
+		.long	0			@ PointerToRelocations
+		.long	0			@ PointerToLineNumbers
+		.short	0			@ NumberOfRelocations
+		.short	0			@ NumberOfLineNumbers
+		.long	0xe0500020		@ Characteristics
+
+		.align	9
+__efi_start:
+#endif
+		.endm
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
deleted file mode 100644
index 22a75259f..000000000
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * The head-file for SH-Mobile ARM platforms
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Simon Horman <horms@verge.net.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifdef CONFIG_ZBOOT_ROM
-
-	.section	".start", "ax"
-
-	/* load board-specific initialization code */
-#include <mach/zboot.h>
-
-	adr	r0, dtb_info
-	ldmia	r0, {r1, r3, r4, r5, r7}
-
-	sub	r0, r0, r1		@ calculate the delta offset
-	add	r5, r5, r0		@ _edata
-
-	ldr	lr, [r5, #0]		@ check if valid DTB is present
-	cmp	lr, r3
-	bne	0f
-
-	add	r9, r7, #31		@ rounded up to a multiple
-	bic	r9, r9, #31		@ ... of 32 bytes
-
-	add	r6, r9, r5		@ copy from _edata
-	add	r9, r9, r4		@ to MEMORY_START
-
-1:	ldmdb	r6!, {r0 - r3, r10 - r12, lr}
-	cmp	r6, r5
-	stmdb	r9!, {r0 - r3, r10 - r12, lr}
-	bhi	1b
-
-	/* Success: Zero board ID, pointer to start of memory for atag/dtb */
-	mov	r7, #0
-	mov	r8, r4
-	b	2f
-
-	.align	2
-dtb_info:
-	.word	dtb_info
-#ifndef __ARMEB__
-	.word	0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-	.word	0xd00dfeed
-#endif
-	.word	MEMORY_START
-	.word	_edata
-	.word	0x4000			@ maximum DTB size
-0:
-	/* Failure: Zero board ID, NULL atag/dtb */
-	mov 	r7, #0
-	mov	r8, #0			@ pass null pointer as atag
-2 :
-
-#endif /* CONFIG_ZBOOT_ROM */
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 06e983f59..fc6d54154 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -12,6 +12,8 @@
 #include <asm/assembler.h>
 #include <asm/v7m.h>
 
+#include "efi-header.S"
+
  AR_CLASS(	.arch	armv7-a	)
  M_CLASS(	.arch	armv7-m	)
 
@@ -126,7 +128,7 @@
 start:
 		.type	start,#function
 		.rept	7
-		mov	r0, r0
+		__nop
 		.endr
    ARM(		mov	r0, r0		)
    ARM(		b	1f		)
@@ -139,7 +141,8 @@ start:
 		.word	0x04030201	@ endianness flag
 
  THUMB(		.thumb			)
-1:
+1:		__EFI_HEADER
+
  ARM_BE8(	setend	be		)	@ go BE8 if compiled for BE8
  AR_CLASS(	mrs	r9, cpsr	)
 #ifdef CONFIG_ARM_VIRT_EXT
@@ -776,7 +779,7 @@ __armv7_mmu_cache_on:
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
 		bic     r6, r6, #1 << 31        @ 32-bit translation system
-		bic     r6, r6, #3 << 0         @ use only ttbr0
+		bic     r6, r6, #(7 << 0) | (1 << 4)	@ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
@@ -1353,6 +1356,53 @@ __enter_kernel:
 
 reloc_code_end:
 
+#ifdef CONFIG_EFI_STUB
+		.align	2
+_start:		.long	start - .
+
+ENTRY(efi_stub_entry)
+		@ allocate space on stack for passing current zImage address
+		@ and for the EFI stub to return of new entry point of
+		@ zImage, as EFI stub may copy the kernel. Pointer address
+		@ is passed in r2. r0 and r1 are passed through from the
+		@ EFI firmware to efi_entry
+		adr	ip, _start
+		ldr	r3, [ip]
+		add	r3, r3, ip
+		stmfd	sp!, {r3, lr}
+		mov	r2, sp			@ pass zImage address in r2
+		bl	efi_entry
+
+		@ Check for error return from EFI stub. r0 has FDT address
+		@ or error code.
+		cmn	r0, #1
+		beq	efi_load_fail
+
+		@ Preserve return value of efi_entry() in r4
+		mov	r4, r0
+		bl	cache_clean_flush
+		bl	cache_off
+
+		@ Set parameters for booting zImage according to boot protocol
+		@ put FDT address in r2, it was returned by efi_entry()
+		@ r1 is the machine type, and r0 needs to be 0
+		mov	r0, #0
+		mov	r1, #0xFFFFFFFF
+		mov	r2, r4
+
+		@ Branch to (possibly) relocated zImage that is in [sp]
+		ldr	lr, [sp]
+		ldr	ip, =start_offset
+		add	lr, lr, ip
+		mov	pc, lr				@ no mode switch
+
+efi_load_fail:
+		@ Return EFI_LOAD_ERROR to EFI firmware on error.
+		ldr	r0, =0x80000001
+		ldmfd	sp!, {ip, pc}
+ENDPROC(efi_stub_entry)
+#endif
+
 		.align
 		.section ".stack", "aw", %nobits
 .L_user_stack:	.space	4096
diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.S
index a425ad959..f72088495 100644
--- a/arch/arm/boot/compressed/piggy.lzo.S
+++ b/arch/arm/boot/compressed/piggy.S
@@ -1,6 +1,6 @@
 	.section .piggydata,#alloc
 	.globl	input_data
 input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzo"
+	.incbin	"arch/arm/boot/compressed/piggy_data"
 	.globl	input_data_end
 input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.gzip.S
deleted file mode 100644
index a68adf91a..000000000
--- a/arch/arm/boot/compressed/piggy.gzip.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.gzip"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lz4.S b/arch/arm/boot/compressed/piggy.lz4.S
deleted file mode 100644
index 3d9a57561..000000000
--- a/arch/arm/boot/compressed/piggy.lz4.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lz4"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S
deleted file mode 100644
index d7e69cffb..000000000
--- a/arch/arm/boot/compressed/piggy.lzma.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzma"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S
deleted file mode 100644
index 5703f300d..000000000
--- a/arch/arm/boot/compressed/piggy.xzkern.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.xzkern"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
index 36e53ef92..689467448 100644
--- a/arch/arm/boot/compressed/string.c
+++ b/arch/arm/boot/compressed/string.c
@@ -65,6 +65,15 @@ size_t strlen(const char *s)
 	return sc - s;
 }
 
+size_t strnlen(const char *s, size_t count)
+{
+	const char *sc;
+
+	for (sc = s; count-- && *sc != '\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+
 int memcmp(const void *cs, const void *ct, size_t count)
 {
 	const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 2b60b843a..81c493156 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -48,6 +48,13 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
   }
+  .data : {
+    /*
+     * The EFI stub always executes from RAM, and runs strictly before the
+     * decompressor, so we can make an exception for its r/w data, and keep it
+     */
+    *(.data.efistub)
+  }
   .piggydata : {
     *(.piggydata)
   }
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a24..faacd5237 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -2,12 +2,15 @@ ifeq ($(CONFIG_OF),y)
 
 dtb-$(CONFIG_ARCH_ALPINE) += \
 	alpine-db.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
 dtb-$(CONFIG_MACH_ASM9260) += \
 	alphascale-asm9260-devkit.dtb
 # Keep at91 dtb files sorted alphabetically for each SoC
-dtb-$(CONFIG_SOC_SAM_V4_V5) += \
+dtb-$(CONFIG_SOC_AT91RM9200) += \
 	at91rm9200ek.dtb \
-	mpa1600.dtb \
+	mpa1600.dtb
+dtb-$(CONFIG_SOC_AT91SAM9) += \
 	animeo_ip.dtb \
 	at91-qil_a9260.dtb \
 	aks-cdu.dtb \
@@ -15,8 +18,10 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	evk-pro3.dtb \
 	tny_a9260.dtb \
 	usb_a9260.dtb \
+	at91sam9260ek.dtb \
 	at91sam9261ek.dtb \
 	at91sam9263ek.dtb \
+	at91-sam9_l9260.dtb \
 	tny_a9263.dtb \
 	usb_a9263.dtb \
 	at91-foxg20.dtb \
@@ -41,14 +46,17 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	at91sam9x35ek.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-kizbox2.dtb \
+	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
 	sama5d31ek.dtb \
 	sama5d33ek.dtb \
 	sama5d34ek.dtb \
 	sama5d35ek.dtb \
 	sama5d36ek.dtb \
+	at91-sama5d4_ma5d4evk.dtb \
 	at91-sama5d4_xplained.dtb \
-	at91-sama5d4ek.dtb
+	at91-sama5d4ek.dtb \
+	at91-vinco.dtb
 dtb-$(CONFIG_ARCH_ATLAS6) += \
 	atlas6-evb.dtb
 dtb-$(CONFIG_ARCH_ATLAS7) += \
@@ -57,7 +65,11 @@ dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b.dtb \
-	bcm2835-rpi-b-plus.dtb
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2836-rpi-2-b.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
@@ -71,7 +83,13 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47081-buffalo-wzr-900dhp.dtb \
 	bcm4709-asus-rt-ac87u.dtb \
 	bcm4709-buffalo-wxr-1900dhp.dtb \
-	bcm4709-netgear-r8000.dtb
+	bcm4709-netgear-r7000.dtb \
+	bcm4709-netgear-r8000.dtb \
+	bcm47094-dlink-dir-885l.dtb \
+	bcm94708.dtb \
+	bcm94709.dtb \
+	bcm953012er.dtb \
+	bcm953012k.dtb
 dtb-$(CONFIG_ARCH_BCM_63XX) += \
 	bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
@@ -81,13 +99,20 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
 	bcm958305k.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
 	bcm28155-ap.dtb \
-	bcm21664-garnet.dtb
+	bcm21664-garnet.dtb \
+	bcm23550-sparrow.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958525xmc.dtb \
+	bcm958625hr.dtb \
+	bcm958625k.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb \
 	berlin2cd-google-chromecast.dtb \
 	berlin2q-marvell-dmp.dtb
 dtb-$(CONFIG_ARCH_BRCMSTB) += \
 	bcm7445-bcm97445svmb.dtb
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += \
 	da850-enbw-cmc.dtb \
 	da850-evm.dtb
@@ -96,6 +121,7 @@ dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 dtb-$(CONFIG_ARCH_EFM32) += \
 	efm32gg-dk3750.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
+	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
 	exynos3250-rinato.dtb
 dtb-$(CONFIG_ARCH_EXYNOS4) += \
@@ -114,21 +140,22 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5250-snow-rev5.dtb \
 	exynos5250-spring.dtb \
 	exynos5260-xyref5260.dtb \
+	exynos5410-odroidxu.dtb \
 	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5422-odroidxu3.dtb \
 	exynos5422-odroidxu3-lite.dtb \
+	exynos5422-odroidxu4.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb \
 	exynos5800-peach-pi.dtb
 dtb-$(CONFIG_ARCH_HI3xxx) += \
 	hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += \
-	hisi-x5hd2-dkb.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += \
 	highbank.dtb \
 	ecx-2000.dtb
@@ -136,13 +163,18 @@ dtb-$(CONFIG_ARCH_HIP01) += \
 	hip01-ca9x2.dtb
 dtb-$(CONFIG_ARCH_HIP04) += \
 	hip04-d01.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+	hi3519-demb.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+	hisi-x5hd2-dkb.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
 	integratorcp.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
-	k2hk-evm.dtb \
-	k2l-evm.dtb \
-	k2e-evm.dtb
+	keystone-k2hk-evm.dtb \
+	keystone-k2l-evm.dtb \
+	keystone-k2e-evm.dtb \
+	keystone-k2g-evm.dtb
 dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-b3.dtb \
 	kirkwood-blackarmor-nas220.dtb \
@@ -158,6 +190,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ds109.dtb \
 	kirkwood-ds110jv10.dtb \
 	kirkwood-ds111.dtb \
+	kirkwood-ds112.dtb \
 	kirkwood-ds209.dtb \
 	kirkwood-ds210.dtb \
 	kirkwood-ds212.dtb \
@@ -175,6 +208,12 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-is2.dtb \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-laplug.dtb \
+	kirkwood-linkstation-lsqvl.dtb \
+	kirkwood-linkstation-lsvl.dtb \
+	kirkwood-linkstation-lswsxl.dtb \
+	kirkwood-linkstation-lswvl.dtb \
+	kirkwood-linkstation-lswxl.dtb \
+	kirkwood-linksys-viper.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \
@@ -190,12 +229,15 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
 	kirkwood-nsa310a.dtb \
+	kirkwood-nsa320.dtb \
+	kirkwood-nsa325.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
 	kirkwood-openrd-base.dtb \
 	kirkwood-openrd-client.dtb \
 	kirkwood-openrd-ultimate.dtb \
 	kirkwood-pogo_e02.dtb \
+	kirkwood-pogoplug-series-4.dtb \
 	kirkwood-rd88f6192.dtb \
 	kirkwood-rd88f6281-z0.dtb \
 	kirkwood-rd88f6281-a.dtb \
@@ -211,10 +253,12 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ts419-6281.dtb \
 	kirkwood-ts419-6282.dtb
 dtb-$(CONFIG_ARCH_LPC18XX) += \
+	lpc4337-ciaa.dtb \
 	lpc4350-hitex-eval.dtb \
 	lpc4357-ea4357-devkit.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += \
-	ea3250.dtb phy3250.dtb
+	lpc3250-ea3250.dtb \
+	lpc3250-phy3250.dtb
 dtb-$(CONFIG_MACH_MESON6) += \
 	meson6-atv1200.dtb
 dtb-$(CONFIG_MACH_MESON8) += \
@@ -223,6 +267,12 @@ dtb-$(CONFIG_ARCH_MMP) += \
 	pxa168-aspenite.dtb \
 	pxa910-dkb.dtb \
 	mmp2-brownstone.dtb
+dtb-$(CONFIG_MACH_MESON8B) += \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+	mps2-an385.dtb \
+	mps2-an399.dtb
 dtb-$(CONFIG_ARCH_MOXART) += \
 	moxart-uc7112lx.dtb
 dtb-$(CONFIG_SOC_IMX1) += \
@@ -254,7 +304,8 @@ dtb-$(CONFIG_SOC_IMX51) += \
 	imx51-apf51dev.dtb \
 	imx51-babbage.dtb \
 	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb
+	imx51-eukrea-mbimxsd51-baseboard.dtb \
+	imx51-ts4800.dtb
 dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-ard.dtb \
 	imx53-m53evk.dtb \
@@ -280,6 +331,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw551x.dtb \
 	imx6dl-gw552x.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-pbab01.dtb \
 	imx6dl-rex-basic.dtb \
@@ -288,17 +340,26 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-tx6dl-comtft.dtb \
+	imx6dl-tx6s-8034.dtb \
+	imx6dl-tx6s-8035.dtb \
 	imx6dl-tx6u-801x.dtb \
+	imx6dl-tx6u-8033.dtb \
 	imx6dl-tx6u-811x.dtb \
+	imx6dl-tx6u-81xx-mb7.dtb \
 	imx6dl-udoo.dtb \
 	imx6dl-wandboard.dtb \
 	imx6dl-wandboard-revb1.dtb \
+	imx6q-apalis-ixora.dtb \
 	imx6q-apf6dev.dtb \
 	imx6q-arm2.dtb \
+	imx6q-b450v3.dtb \
+	imx6q-b650v3.dtb \
+	imx6q-b850v3.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
 	imx6q-dfi-fs700-m60.dtb \
 	imx6q-dmo-edmqmx6.dtb \
+	imx6q-evi.dtb \
 	imx6q-gk802.dtb \
 	imx6q-gw51xx.dtb \
 	imx6q-gw52xx.dtb \
@@ -307,8 +368,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw54xx.dtb \
 	imx6q-gw551x.dtb \
 	imx6q-gw552x.dtb \
+	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
+	imx6q-icore-rqs.dtb \
+	imx6q-marsboard.dtb \
 	imx6q-nitrogen6x.dtb \
+	imx6q-nitrogen6_max.dtb \
+	imx6q-novena.dtb \
 	imx6q-phytec-pbab01.dtb \
 	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \
@@ -320,19 +386,38 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-tx6q-1010-comtft.dtb \
 	imx6q-tx6q-1020.dtb \
 	imx6q-tx6q-1020-comtft.dtb \
+	imx6q-tx6q-1036.dtb \
 	imx6q-tx6q-1110.dtb \
+	imx6q-tx6q-11x0-mb7.dtb \
 	imx6q-udoo.dtb \
+	imx6q-utilite-pro.dtb \
 	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb
+	imx6q-wandboard-revb1.dtb \
+	imx6qp-nitrogen6_max.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
 	imx6sl-warp.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
+	imx6sx-nitrogen6sx.dtb \
 	imx6sx-sabreauto.dtb \
 	imx6sx-sdb-reva.dtb \
+	imx6sx-sdb-sai.dtb \
 	imx6sx-sdb.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += \
+	imx6ul-14x14-evk.dtb \
+	imx6ul-pico-hobbit.dtb \
+	imx6ul-tx6ul-0010.dtb \
+	imx6ul-tx6ul-0011.dtb \
+	imx6ul-tx6ul-mainboard.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
-	imx7d-sdb.dtb
+	imx7d-cl-som-imx7.dtb \
+	imx7d-colibri-eval-v3.dtb \
+	imx7d-nitrogen7.dtb \
+	imx7d-sbc-imx7.dtb \
+	imx7d-sdb.dtb \
+	imx7s-colibri-eval-v3.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-qds.dtb \
 	ls1021a-twr.dtb
@@ -341,11 +426,15 @@ dtb-$(CONFIG_SOC_VF610) += \
 	vf610-colibri-eval-v3.dtb \
 	vf610m4-colibri.dtb \
 	vf610-cosmic.dtb \
-	vf610-twr.dtb
+	vf610m4-cosmic.dtb \
+	vf610-twr.dtb \
+	vf610-zii-dev-rev-b.dtb
 dtb-$(CONFIG_ARCH_MXS) += \
 	imx23-evk.dtb \
 	imx23-olinuxino.dtb \
+	imx23-sansa.dtb \
 	imx23-stmp378x_devb.dtb \
+	imx23-xfi3.dtb \
 	imx28-apf28.dtb \
 	imx28-apf28dev.dtb \
 	imx28-apx4devkit.dtb \
@@ -390,6 +479,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-cm-t3530.dtb \
 	omap3-cm-t3730.dtb \
 	omap3-devkit8000.dtb \
+	omap3-devkit8000-lcd43.dtb \
+	omap3-devkit8000-lcd70.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
 	omap3-gta04a3.dtb \
@@ -409,38 +500,55 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-overo-alto35.dtb \
 	omap3-overo-chestnut43.dtb \
 	omap3-overo-gallop43.dtb \
+	omap3-overo-palo35.dtb \
 	omap3-overo-palo43.dtb \
 	omap3-overo-storm-alto35.dtb \
 	omap3-overo-storm-chestnut43.dtb \
 	omap3-overo-storm-gallop43.dtb \
+	omap3-overo-storm-palo35.dtb \
 	omap3-overo-storm-palo43.dtb \
 	omap3-overo-storm-summit.dtb \
 	omap3-overo-storm-tobi.dtb \
+	omap3-overo-storm-tobiduo.dtb \
 	omap3-overo-summit.dtb \
 	omap3-overo-tobi.dtb \
+	omap3-overo-tobiduo.dtb \
 	omap3-pandora-600mhz.dtb \
 	omap3-pandora-1ghz.dtb \
 	omap3-sbc-t3517.dtb \
 	omap3-sbc-t3530.dtb \
 	omap3-sbc-t3730.dtb \
+	omap3-sniper.dtb \
 	omap3-thunder.dtb \
 	omap3-zoom3.dtb
 dtb-$(CONFIG_SOC_TI81XX) += \
-	dm8168-evm.dtb
+	dm8148-evm.dtb \
+	dm8148-t410.dtb \
+	dm8168-evm.dtb \
+	dra62x-j5eco-evm.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
+	am335x-baltos-ir2110.dtb \
+	am335x-baltos-ir3220.dtb \
 	am335x-baltos-ir5221.dtb \
 	am335x-base0033.dtb \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
-	am335x-sl50.dtb \
+	am335x-bonegreen.dtb \
+	am335x-chiliboard.dtb \
+	am335x-cm-t335.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
+	am335x-icev2.dtb \
+	am335x-lxm.dtb \
 	am335x-nano.dtb \
 	am335x-pepper.dtb \
-	am335x-lxm.dtb \
-	am335x-chiliboard.dtb
+	am335x-shc.dtb \
+	am335x-sbc-t335.dtb \
+	am335x-sl50.dtb \
+	am335x-wega-rdk.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-duovero-parlor.dtb \
+	omap4-kc1.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
@@ -450,45 +558,85 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-var-stk-om44.dtb
 dtb-$(CONFIG_SOC_AM43XX) += \
 	am43x-epos-evm.dtb \
-	am437x-sk-evm.dtb \
+	am437x-cm-t43.dtb \
+	am437x-gp-evm.dtb \
 	am437x-idk-evm.dtb \
-	am437x-gp-evm.dtb
+	am437x-sbc-t43.dtb \
+	am437x-sk-evm.dtb
 dtb-$(CONFIG_SOC_OMAP5) += \
 	omap5-cm-t54.dtb \
+	omap5-igep0050.dtb \
 	omap5-sbc-t54.dtb \
 	omap5-uevm.dtb
 dtb-$(CONFIG_SOC_DRA7XX) += \
-	dra7-evm.dtb \
 	am57xx-beagle-x15.dtb \
-	dra72-evm.dtb
+	am57xx-cl-som-am57x.dtb \
+	am57xx-sbc-am57x.dtb \
+	am572x-idk.dtb \
+	dra7-evm.dtb \
+	dra72-evm.dtb \
+	dra72-evm-revc.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += \
+	orion5x-kuroboxpro.dtb \
 	orion5x-lacie-d2-network.dtb \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-linkstation-lsgl.dtb \
+	orion5x-linkstation-lswtgl.dtb \
+	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
+dtb-$(CONFIG_ARCH_OXNAS) += \
+	wd-mbwe.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
+	qcom-apq8060-dragonboard.dtb \
+	qcom-apq8064-arrow-sd-600eval.dtb \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8064-sony-xperia-yuga.dtb \
+	qcom-apq8064-asus-nexus7-flo.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
+	qcom-ipq4019-ap.dk01.1-c1.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
-	arm-realview-pb1176.dtb
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-revb.dtb \
+	arm-realview-eb-a9mp.dtb \
+	arm-realview-pba8.dtb \
+	arm-realview-pbx-a9.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rk3036-evb.dtb \
+	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
 	rk3066a-marsboard.dtb \
 	rk3066a-rayeager.dtb \
 	rk3188-radxarock.dtb \
+	rk3228-evb.dtb \
+	rk3229-evb.dtb \
 	rk3288-evb-act8846.dtb \
 	rk3288-evb-rk808.dtb \
 	rk3288-firefly-beta.dtb \
-	rk3288-firefly.dtb
+	rk3288-firefly.dtb \
+	rk3288-miqi.dtb \
+	rk3288-popmetal.dtb \
+	rk3288-r89.dtb \
+	rk3288-rock2-square.dtb \
+	rk3288-veyron-brain.dtb \
+	rk3288-veyron-jaq.dtb \
+	rk3288-veyron-jerry.dtb \
+	rk3288-veyron-mickey.dtb \
+	rk3288-veyron-minnie.dtb \
+	rk3288-veyron-pinky.dtb \
+	rk3288-veyron-speedy.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += \
 	s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += \
@@ -500,12 +648,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
-	r8a7740-armadillo800eva.dtb \
-	r8a7778-bockw.dtb \
-	r8a7778-bockw-reference.dtb \
-	r8a7779-marzen.dtb \
-	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
@@ -514,16 +656,22 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7778-bockw.dtb \
 	r8a7779-marzen.dtb \
 	r8a7790-lager.dtb \
-	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
+	r8a7791-porter.dtb \
+	r8a7792-blanche.dtb \
+	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
+	r8a7794-silk.dtb \
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
+	socfpga_cyclone5_mcvevk.dtb \
 	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_de0_sockit.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
+	socfpga_cyclone5_vining_fpga.dtb \
 	socfpga_vt.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += \
 	spear1310-evb.dtb \
@@ -544,32 +692,48 @@ dtb-$(CONFIG_ARCH_STI) += \
 	stih416-b2020.dtb \
 	stih416-b2020e.dtb \
 	stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb
+dtb-$(CONFIG_ARCH_STM32)+= \
+	stm32f429-disco.dtb \
+	stm32f469-disco.dtb \
+	stm32429i-eval.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
 	sun4i-a10-chuwi-v7-cw0825.dtb \
 	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
 	sun4i-a10-gemei-g9.dtb \
 	sun4i-a10-hackberry.dtb \
 	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
 	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
 	sun4i-a10-jesurun-q5.dtb \
 	sun4i-a10-marsboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-mk802.dtb \
 	sun4i-a10-mk802ii.dtb \
 	sun4i-a10-olinuxino-lime.dtb \
-	sun4i-a10-pcduino.dtb
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
 	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun5i-a13-olinuxino-micro.dtb \
-	sun5i-a13-utoo-p66.dtb
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
@@ -577,34 +741,63 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-i7.dtb \
 	sun6i-a31-m9.dtb \
 	sun6i-a31-mele-a1000g-quad.dtb \
-	sun6i-a31s-cs908.dtb
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
 	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
 	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
 	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
 	sun7i-a20-olinuxino-micro.dtb \
 	sun7i-a20-orangepi.dtb \
 	sun7i-a20-orangepi-mini.dtb \
 	sun7i-a20-pcduino3.dtb \
 	sun7i-a20-pcduino3-nano.dtb \
-	sun7i-a20-wexler-tab7200.dtb
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
 dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
 	sun8i-a23-ippo-q8h-v5.dtb \
 	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
 	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-sinlinx-sina33.dtb
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-r16-parrot.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_ARCH_TANGO) += \
+	tango4-vantage-1172.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
@@ -627,6 +820,7 @@ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
 	tegra114-roth.dtb \
 	tegra114-tn7.dtb
 dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
+	tegra124-apalis-eval.dtb \
 	tegra124-jetson-tk1.dtb \
 	tegra124-nyan-big.dtb \
 	tegra124-nyan-blaze.dtb \
@@ -642,10 +836,15 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-ccu8540.dtb \
 	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ph1-sld3-ref.dtb \
 	uniphier-ph1-ld4-ref.dtb \
+	uniphier-ph1-ld6b-ref.dtb \
+	uniphier-ph1-pro4-ace.dtb \
 	uniphier-ph1-pro4-ref.dtb \
-	uniphier-ph1-sld8-ref.dtb
+	uniphier-ph1-pro4-sanji.dtb \
+	uniphier-ph1-sld3-ref.dtb \
+	uniphier-ph1-sld8-ref.dtb \
+	uniphier-proxstream2-gentil.dtb \
+	uniphier-proxstream2-vodka.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
 	versatile-pb.dtb
@@ -675,6 +874,10 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 	armada-370-netgear-rn102.dtb \
 	armada-370-netgear-rn104.dtb \
 	armada-370-rd.dtb \
+	armada-370-seagate-nas-2bay.dtb \
+	armada-370-seagate-nas-4bay.dtb \
+	armada-370-seagate-personal-cloud.dtb \
+	armada-370-seagate-personal-cloud-2bay.dtb \
 	armada-370-synology-ds213j.dtb
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
@@ -682,6 +885,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
 	armada-385-linksys-cobra.dtb \
+	armada-388-clearfog.dtb \
 	armada-388-db.dtb \
 	armada-388-gp.dtb \
 	armada-388-rd.dtb
@@ -705,12 +909,20 @@ dtb-$(CONFIG_MACH_DOVE) += \
 	dove-dove-db.dtb \
 	dove-sbc-a510.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt2701-evb.dtb \
+	mt6580-evbp1.dtb \
 	mt6589-aquaris5.dtb \
 	mt6592-evb.dtb \
+	mt7623-evb.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
+dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
+	aspeed-ast2500-evb.dtb
 endif
 
+dtstree		:= $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+
 always		:= $(dtb-y)
 clean-files	:= *.dtb
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
index d9c50fbb4..5b1bf92d9 100644
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -57,7 +57,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
index 9af2d60e9..db8752fc4 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -155,6 +155,16 @@
 			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
 
 			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <96>;
+			al,msi-num-spis = <64>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
new file mode 100644
index 000000000..a9a97307d
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 2110";
+};
+
+&am33xx_pinmux {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <7>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
+};
+
+&phy_sel {
+	rmii-clock-ext = <1>;
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
new file mode 100644
index 000000000..fe002a17c
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 3220";
+};
+
+&am33xx_pinmux {
+	tca6416_pins: pinmux_tca6416_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <7>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
+};
+
+&phy_sel {
+	rmii-clock-ext = <1>;
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 7d3660169..d0faa7b8c 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -13,274 +13,55 @@
 
 /dts-v1/;
 
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am335x-baltos.dtsi"
 
 / {
 	model = "OnRISC Baltos iR 5221";
-	compatible = "vscom,onrisc", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	wl12xx_vmmc: fixedregulator@2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 8 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
 };
 
 &am33xx_pinmux {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x020 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
-			0x024 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
-			0x028 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
-			0x02c (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
-			0x080 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
-			0x084 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
-			0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
-		>;
-	};
-
-	tps65910_pins: pinmux_tps65910_pins {
-		pinctrl-single,pins = <
-			0x078 (PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
-		>;
-	};
-
 	tca6416_pins: pinmux_tca6416_pins {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+			AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x158 0x2a      /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
-			0x15c 0x2a      /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
-		>;
-	};
 
 	dcan1_pins: pinmux_dcan1_pins {
 		pinctrl-single,pins = <
-			0x168 0x0a      /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
-			0x16c 0x2a      /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
+			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x180 0x28      /* uart1_rxd, INPUT | MODE0 */
-			0x184 0x28      /* uart1_txd, INPUT | MODE0 */
-			/*0x178 0x28*/      /* uart1_ctsn, INPUT | MODE0 */
-			/*0x17c 0x08*/      /* uart1_rtsn, OUTPUT | MODE0 */
-			0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
-			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
-			0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x150 0x29      /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
-			0x154 0x09      /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
-			/*0x188 0x2a*/      /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
-			/*0x18c 0x2a*/      /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
-			0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
-			0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
-
-
-			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	status = "okay";
-
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		ti,nand-xfer-type = "polled";
-
-		gpmc,device-nand = "true";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		elm_id = <&elm>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
 };
 
 &uart1 {
@@ -290,8 +71,6 @@
 	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
 	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-	rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 
 	status = "okay";
 };
@@ -303,35 +82,11 @@
 	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-	rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 
 	status = "okay";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps65910_pins>;
-	};
-
-	at24@50 {
-		compatible = "at24,24c02";
-		pagesize = <8>;
-		reg = <0x50>;
-	};
-
 	tca6416: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
@@ -344,14 +99,6 @@
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
 &usb0_phy {
 	status = "okay";
 };
@@ -370,112 +117,13 @@
 	dr_mode = "otg";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	ti,en-ck32k-xtal = <1>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	status = "okay";
-};
-
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
 };
 
 &cpsw_emac1 {
@@ -488,42 +136,6 @@
 	rmii-clock-ext = <1>;
 };
 
-&mmc1 {
-	vmmc-supply = <&vmmc_reg>;
-	status = "okay";
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0 {
-	ti,no-reset-on-init;
-};
-
 &dcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dcan1_pins>;
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
new file mode 100644
index 000000000..b68917263
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -0,0 +1,408 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "vscom,onrisc", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	wl12xx_vmmc: fixedregulator@2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 8 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
+			AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
+		>;
+	};
+
+	tps65910_pins: pinmux_tps65910_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2)      /* spi0_d1.i2c1_sda_mux3 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2)      /* spi0_cs0.i2c1_scl_mux3 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
+
+
+			/* Slave 2 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		ti,nand-xfer-type = "polled";
+
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,elm-id = <&elm>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps65910_pins>;
+	};
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	ti,en-ck32k-xtal = <1>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc_reg>;
+	status = "okay";
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&wl12xx_vmmc>;
+	ti,non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index 72a9b3fc4..58a05f7d0 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -46,39 +46,39 @@
 &am33xx_pinmux {
 	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
 		>;
 	};
 	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
 		>;
 	};
 
 	leds_base_pins: pinmux_leds_base_pins {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index fec78349c..e247c15e5 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -18,6 +18,10 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
@@ -67,112 +71,112 @@
 
 	user_leds_s0: user_leds_s0 {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			0x17c (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
 		>;
 	};
 
 	emmc_pins: pinmux_emmc_pins {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 		>;
 	};
 };
@@ -318,7 +322,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -359,12 +363,8 @@
 	phy-mode = "mii";
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
 &mac {
+	slaves = <1>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
@@ -383,8 +383,7 @@
 	bus-width = <0x4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &aes {
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 5c42d259f..ca721670b 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -33,51 +33,72 @@
 	status = "okay";
 };
 
+&cpu0_opp_table {
+	/*
+	 * All PG 2.0 silicon may not support 1GHz but some of the early
+	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
+	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
+	 */
+	oppnitro@1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
+};
+
 &am33xx_pinmux {
 	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
 		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
 		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
 		>;
 	};
 };
 
 &lcdc {
 	status = "okay";
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
 };
 
-/ {
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
+&i2c0 {
+	tda19988 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
 		pinctrl-names = "default", "off";
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-		status = "okay";
+
+		port {
+			hdmi_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
new file mode 100644
index 000000000..dce3c8657
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Green";
+	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)	/* spi0_sclk.uart2_rxd */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)	/* spi0_d0.uart2_txd */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 310da20a8..2a624b3c9 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -35,38 +35,113 @@
 };
 
 &am33xx_pinmux {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	usb1_drvvbus: usb1_drvvbus {
 		pinctrl-single,pins = <
-			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+			AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
 		>;
 	};
 
 	sd_pins: pinmux_sd_card {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	led_gpio_pins: led_gpio_pins {
 		pinctrl-single,pins = <
-			0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
-			0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+			AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+			AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
 		>;
 	};
 };
 
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
 &ldo4_reg {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
 };
 
 /* Ethernet */
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rmii";
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 7e9a34dff..1d647358f 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -7,6 +7,7 @@
  * published by the Free Software Foundation.
  */
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Grinn AM335x ChiliSOM";
@@ -29,92 +30,32 @@
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* mdio_data.mdio_data */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
-			/* mdio_clk.mdio_clk */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	nandflash_pins: nandflash_pins {
 		pinctrl-single,pins = <
-			0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
@@ -181,20 +122,8 @@
 	};
 };
 
-/* Ethernet MAC */
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+&rtc {
+	system-power-controller;
 };
 
 /* NAND Flash */
@@ -208,7 +137,12 @@
 	pinctrl-0 = <&nandflash_pins>;
 	ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -227,12 +161,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 	};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
new file mode 100644
index 000000000..817b1dec0
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -0,0 +1,569 @@
+/*
+ * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "CompuLab CM-T335";
+	compatible = "compulab,cm-t335", "ti,am33xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;	/* 128 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_led_pins>;
+		led@0 {
+			label = "cm_t335:green";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* regulator for mmc */
+	vmmc_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* Regulator for WiFi */
+	vwlan_fixed: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
+		enable-active-high;
+		regulator-boot-off;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "cm-t335";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Headphone", "Headphone Jack";
+
+		simple-audio-card,routing =
+			"Headphone Jack", "LHPOUT",
+			"Headphone Jack", "RHPOUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic Jack";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bluetooth_pins>;
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			/* uart0_ctsn.i2c1_sda */
+			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2)
+			/* uart0_rtsn.i2c1_scl */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2)
+		>;
+	};
+
+	gpio_led_pins: pinmux_gpio_led_pins {
+		pinctrl-single,pins = <
+			/* gpmc_csn3.gpio2_0 */
+			AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
+			/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+			/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+			/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+			/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+			/* gpmc_ben0_cle.gpmc_ben0_cle */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
+			/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	dcan0_pins: pinmux_dcan0_pins {
+		pinctrl-single,pins = <
+			/* uart1_ctsn.dcan0_tx */
+			AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)
+			/* uart1_rtsn.dcan0_rx */
+			AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2)
+		>;
+	};
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			/* uart1_rxd.dcan1_tx */
+			AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)
+			/* uart1_txd.dcan1_rx */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2)
+		>;
+	};
+
+	ecap0_pins: pinmux_ecap0_pins {
+		pinctrl-single,pins = <
+			/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM33XX_IOPAD(0x964, 0x0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			/* mii1_tx_en.rgmii1_tctl */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			/* spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0)
+			/* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			/* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0)
+			/* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0)
+			/* spi0_cs1.spi0_cs1 */
+			AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	/* wl1271 bluetooth */
+	bluetooth_pins: pinmux_bluetooth_pins {
+		pinctrl-single,pins = <
+			/* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	/* TLV320AIC23B codec */
+	mcasp1_pins: pinmux_mcasp1_pins {
+		pinctrl-single,pins = <
+			/* MII1_CRS.mcasp1_aclkx */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)
+			/* MII1_RX_ER.mcasp1_fsx */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)
+			/* MII1_COL.mcasp1_axr2 */
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4)
+			/* RMII1_REF_CLK.mcasp1_axr3 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)
+		>;
+	};
+
+	/* wl1271 WiFi */
+	wifi_pins: pinmux_wifi_pins {
+		pinctrl-single,pins = <
+			/* EMU1.gpio3_8 - WiFi IRQ */
+			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)
+			/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+/* WLS1271 bluetooth */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+	/* CM-T335 board EEPROM */
+	eeprom: 24c02@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+	/* Real Time Clock */
+	ext_rtc: em3027@56 {
+		compatible = "emmicro,em3027";
+		reg = <0x56>;
+	};
+	/* Audio codec */
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@48300100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "spl";
+			reg = <0x00000000 0x00200000>;
+		};
+		partition@1 {
+			label = "uboot";
+			reg = <0x00200000 0x00100000>;
+		};
+		partition@2 {
+			label = "uboot environment";
+			reg = <0x00300000 0x00100000>;
+		};
+		partition@3 {
+			label = "dtb";
+			reg = <0x00400000 0x00100000>;
+		};
+		partition@4 {
+			label = "splash";
+			reg = <0x00500000 0x00400000>;
+		};
+		partition@5 {
+			label = "linux";
+			reg = <0x00900000 0x00600000>;
+		};
+		partition@6 {
+			label = "rootfs";
+			reg = <0x00F00000 0>;
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	slaves = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii-txid";
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_pins>;
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+};
+
+/* Touschscreen and analog digital converter */
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x01 0x10 0x23 0x32>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+/* CPU audio */
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcasp1_pins>;
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 16 serializers */
+		num-serializer = <16>;
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+
+		#sound-dai-cells= <0>;
+		status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	ti,pindir-d0-out-d1-in = <1>;
+	/* WLS1271 WiFi */
+	wlcore: wlcore@1 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins>;
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 765be2766..5d28712ad 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -83,14 +83,14 @@
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch@10 {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -136,16 +136,29 @@
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <12000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"LINE1L",               "Line In",
-			"LINE1R",               "Line In";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
 	};
 };
 
@@ -155,206 +168,215 @@
 
 	matrix_keypad_s0: matrix_keypad_s0 {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 
 	volume_keys_s0: volume_keys_s0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	nandflash_pins_s0: nandflash_pins_s0 {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM33XX_IOPAD(0x964, MUX_MODE0)	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mmc3_pins: pinmux_mmc3_pins {
 		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
-			0x4C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
-			0x8C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
 		>;
 	};
 
 	wlan_pins: pinmux_wlan_pins {
 		pinctrl-single,pins = <
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-			0x19C (PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
-			0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
+			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
 		>;
 	};
 
 	lcd_pins_s0: lcd_pins_s0 {
 		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
-	am335x_evm_audio_pins: am335x_evm_audio_pins {
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
 		>;
 	};
 };
@@ -460,6 +482,7 @@
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -496,7 +519,12 @@
 	pinctrl-0 = <&nandflash_pins_s0>;
 	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -515,12 +543,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
@@ -575,19 +600,21 @@
 #include "tps65910.dtsi"
 
 &mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&am335x_evm_audio_pins>;
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
-		status = "okay";
+	status = "okay";
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &tps {
@@ -613,7 +640,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -712,14 +739,14 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &mmc3 {
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 12
-		&edma 13>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
@@ -741,11 +768,6 @@
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-					    2 13>;
-};
-
 &sham {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 156d05efc..09308d666 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -123,7 +123,7 @@
 			label = "button2";
 			linux,code = <0x102>;
 			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch@4 {
@@ -141,14 +141,26 @@
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVMSK";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVMSK";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
 	};
 
 	panel {
@@ -192,225 +204,234 @@
 
 	lcd_pins_default: lcd_pins_default {
 		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 	lcd_pins_sleep: lcd_pins_sleep {
 		pinctrl-single,pins = <
-			0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
-			0xa4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
-			0xa8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
-			0xac (PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
-			0xb0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
-			0xb4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
-			0xb8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
-			0xbc (PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
-			0xc0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
-			0xc4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
-			0xc8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
-			0xcc (PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
-			0xd0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
-			0xd4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
-			0xd8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
-			0xdc (PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 
 	user_leds_s0: user_leds_s0 {
 		pinctrl-single,pins = <
-			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+			AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
 		>;
 	};
 
 	gpio_keys_s0: gpio_keys_s0 {
 		pinctrl-single,pins = <
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+			AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	ecap2_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+			AM33XX_IOPAD(0x99c, MUX_MODE4)	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 		>;
 	};
 };
@@ -462,6 +483,7 @@
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -538,7 +560,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -625,7 +647,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &sham {
@@ -661,19 +683,21 @@
 };
 
 &mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcasp1_pins>;
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
-		status = "okay";
+	status = "okay";
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &tscadc {
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
new file mode 100644
index 000000000..7d8b8fefd
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -0,0 +1,313 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x ICE V2 board
+ * http://www.ti.com/tool/tmdsice3359
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "TI AM3359 ICE-V2";
+	compatible = "ti,am3359-icev2", "ti,am33xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	leds@0 {
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	/* Tricolor status LEDs */
+	leds@1 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		led@0 {
+			label = "status0:red:cpu0";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		led@1 {
+			label = "status0:green:usr";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "status0:yellow:usr";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "status1:red:mmc0";
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		led@4 {
+			label = "status1:green:usr";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "status1:yellow:usr";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds: user_leds {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
+			AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
+		>;
+	};
+
+	mmc0_pins_default: mmc0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
+		>;
+	};
+
+	i2c0_pins_default: i2c0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
+		>;
+	};
+
+	spi0_pins_default: spi0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
+			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_default>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: power-controller@2d {
+		reg = <0x2d>;
+	};
+
+	tpic2810: gpio@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9536: gpio@41 {
+		compatible = "ti,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1326000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+};
+
+&gpio0 {
+	/* Do not idle the GPIO used for holding the VTT regulator */
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index c0e113525..e7d9ca130 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -11,6 +11,7 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	cpus {
@@ -56,41 +57,41 @@
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	nandflash_pins: pinmux_nandflash_pins {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
 		>;
 	};
 };
@@ -129,7 +130,12 @@
 	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,device-width = <1>;
@@ -147,18 +153,15 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		/* MTD partition table */
 		partition@0 {
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 5c5667a36..d97b0efa4 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -46,109 +46,109 @@
 &am33xx_pinmux {
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	emmc_pins: pinmux_emmc_pins {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 5ed4ca6ea..f313999c5 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -41,121 +41,121 @@
 
 	misc_pins: misc_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
 		>;
 	};
 
 	gpmc_pins: gpmc_pins {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
-			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
-			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
-			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
-			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
-			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
-			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
-			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
-			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
-			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
-
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
-
-			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
-			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
-			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
-
-			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
-			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
-			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
+
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
+			AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
+			AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
+
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
+
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
+
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
 		>;
 	};
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	uart0_pins: uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: uart1_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
-			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
 		>;
 	};
 
 	uart2_pins: uart2_pins {
 		pinctrl-single,pins = <
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
-			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
-			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
+			AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
 		>;
 	};
 
 	uart3_pins: uart3_pins {
 		pinctrl-single,pins = <
-			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
-			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
-			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
+			AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
+			AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
 		>;
 	};
 
 	uart4_pins: uart4_pins {
 		pinctrl-single,pins = <
-			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
-			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
-			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
+			AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
+			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
 		>;
 	};
 
 	uart5_pins: uart5_pins {
 		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
-			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
+			AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
+			AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
 		>;
 	};
 
 	mmc1_pins: mmc1_pins {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 7106114c7..8867aaaec 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -93,14 +93,14 @@
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0 {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 	i2c1_pins: pinmux_i2c1 {
 		pinctrl-single,pins = <
-			0x10C (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
+			AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
 		>;
 	};
 };
@@ -130,7 +130,7 @@
 &am33xx_pinmux {
 	accel_pins: pinmux_accel {
 		pinctrl-single,pins = <
-			0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
+			AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
 		>;
 	};
 };
@@ -177,12 +177,12 @@
 &am33xx_pinmux {
 	audio_pins: pinmux_audio {
 		pinctrl-single,pins = <
-			0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
-			0x40 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
 		>;
 	};
 };
@@ -228,36 +228,36 @@
 &am33xx_pinmux {
 	lcd_pins: pinmux_lcd {
 		pinctrl-single,pins = <
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 			/* Display Enable */
-			0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 };
@@ -291,29 +291,29 @@
 &am33xx_pinmux {
 	ethernet_pins: pinmux_ethernet {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
 			/* ethernet interrupt */
-			0x144 (PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
 			/* ethernet PHY nReset */
-			0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
 		>;
 	};
 
 	mdio_pins: pinmux_mdio {
 		pinctrl-single,pins = <
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 };
@@ -339,13 +339,6 @@
 	ti,non-removable;
 };
 
-&edma {
-	/* Map eDMA MMC2 Events from Crossbar */
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-                                            2 13>;
-};
-
-
 &mmc3 {
 	/* Wifi & Bluetooth on MMC #3 */
 	status = "okay";
@@ -354,8 +347,8 @@
 	vmmmc-supply = <&v3v3c_reg>;
 	bus-width = <4>;
 	ti,non-removable;
-	dmas = <&edma 12
-		&edma 13>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 };
 
@@ -363,45 +356,45 @@
 &am33xx_pinmux {
 	sd_pins: pinmux_sd_card {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
 		>;
 	};
 	emmc_pins: pinmux_emmc {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
 			/* EMMC nReset */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
 		>;
 	};
 	wireless_pins: pinmux_wireless {
 		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
+			AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
 			/* WLAN nReset */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
 			/* WLAN nPower down */
-			0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
 			/* 32kHz Clock */
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 };
@@ -497,10 +490,10 @@
 &am33xx_pinmux {
 	spi0_pins: pinmux_spi0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-			0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-			0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
 		>;
 	};
 };
@@ -538,16 +531,16 @@
 &am33xx_pinmux {
 	uart0_pins: pinmux_uart0 {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 	uart1_pins: pinmux_uart1 {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
 		>;
 	};
 };
@@ -590,9 +583,9 @@
 	usb_pins: pinmux_usb {
 		pinctrl-single,pins = <
 			/* USB0 Over-Current (active low) */
-			0x64 (PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
 			/* USB1 Over-Current (active low) */
-			0x68 (PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
 		>;
 	};
 };
@@ -627,37 +620,37 @@
 		label = "home";
 		linux,code = <KEY_HOME>;
 		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 
 	button@1 {
 		label = "menu";
 		linux,code = <KEY_MENU>;
 		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 
 	buttons@2 {
 		label = "power";
 		linux,code = <KEY_POWER>;
 		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 };
 
 &am33xx_pinmux {
 	user_leds_pins: pinmux_user_leds {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-			0x54 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 		>;
 	};
 
 	user_buttons_pins: pinmux_user_buttons {
 		pinctrl-single,pins = <
-			0x58 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5C (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
-			0x164 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
+			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
new file mode 100644
index 000000000..1263c9d4c
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -0,0 +1,373 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Phytec AM335x phyCORE";
+	compatible = "phytec,am335x-phycore-som", "ti,am33xx";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &rtc;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		vcc5v: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+/* Crypto Module */
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet0_pins: pinmux_ethernet0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins>;
+	status = "okay";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+/* I2C Busses */
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: pmic@2d {
+		reg = <0x2d>;
+	};
+
+	i2c_eeprom: eeprom@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+		status = "disabled";
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "rv4162";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+/* NAND memory */
+&am33xx_pinmux {
+		nandflash_pins: pinmux_nandflash {
+			pinctrl-single,pins = <
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
+	nandflash: nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,cycle2cycle-diffcsen;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <30>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		ti,elm-id = <&elm>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "xload";
+			reg = <0x0 0x20000>;
+		};
+		partition@1 {
+			label = "xload_backup1";
+			reg = <0x20000 0x20000>;
+		};
+		partition@2 {
+			label = "xload_backup2";
+			reg = <0x40000 0x20000>;
+		};
+		partition@3 {
+			label = "xload_backup3";
+			reg = <0x60000 0x20000>;
+		};
+		partition@4 {
+			label = "barebox";
+			reg = <0x80000 0x80000>;
+		};
+		partition@5 {
+			label = "bareboxenv";
+			reg = <0x100000 0x40000>;
+		};
+		partition@6 {
+			label = "oftree";
+			reg = <0x140000 0x40000>;
+		};
+		partition@7 {
+			label = "kernel";
+			reg = <0x180000 0x800000>;
+		};
+		partition@8 {
+			label = "root";
+			reg = <0x980000 0x0>;
+		};
+	};
+};
+
+/* Power */
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vcc5v>;
+	vcc2-supply = <&vcc5v>;
+	vcc3-supply = <&vcc5v>;
+	vcc4-supply = <&vcc5v>;
+	vcc5-supply = <&vcc5v>;
+	vcc6-supply = <&vcc5v>;
+	vcc7-supply = <&vcc5v>;
+	vccio-supply = <&vcc5v>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-name = "vdig1_1p8v";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+/* SPI Busses */
+&am33xx_pinmux {
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
+		>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	serial_flash: m25p80@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <48000000>;
+		reg = <0x0>;
+		m25p,fast-read;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "xload";
+			reg = <0x0 0x20000>;
+		};
+		partition@1 {
+			label = "barebox";
+			reg = <0x20000 0x80000>;
+		};
+		partition@2 {
+			label = "bareboxenv";
+			reg = <0xa0000 0x20000>;
+		};
+		partition@3 {
+			label = "oftree";
+			reg = <0xc0000 0x20000>;
+		};
+		partition@4 {
+			label = "kernel";
+			reg = <0xe0000 0x0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
new file mode 100644
index 000000000..917d7ccc9
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -0,0 +1,219 @@
+/*
+ * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am335x-cm-t335.dts"
+
+/ {
+	model = "CompuLab CM-T335 on SB-T335";
+	compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
+
+	/* DRM display driver */
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		display-timings {
+			/* Timing selection performed by U-Boot */
+			timing0: lcd {/* 800x480p62 */
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+			timing1: dvi { /* 1024x768p60 */
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				hfront-porch = <24>;
+				hback-porch = <160>;
+				hsync-len = <136>;
+				vactive = <768>;
+				vfront-porch = <3>;
+				vback-porch = <29>;
+				vsync-len = <6>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	/* Display */
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)
+			/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: lcd_pins_sleep {
+		pinctrl-single,pins = <
+			/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)
+			/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	/* GPIO extender */
+	gpio_ext: pca9555@26 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x26>;
+		dvi_ena {
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "dvi-enable";
+		};
+		lcd_ena {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "lcd-enable";
+		};
+	};
+};
+
+/* Display */
+&lcdc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
new file mode 100644
index 000000000..837d5b80e
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -0,0 +1,577 @@
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Bosch SHC";
+	compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+	aliases {
+		mmcblk0 = &mmc1;
+		mmcblk1 = &mmc2;
+	};
+
+	cpus {
+		cpu@0 {
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				594000  1225000
+				294000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		back_button {
+			label = "Back Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+
+		front_button {
+			label = "Front Button";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_FRONT>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "shc:power:red";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "shc:power:bl";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		led@3 {
+			label = "shc:lan:red";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "shc:lan:bl";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "shc:cloud:red";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "shc:cloud:bl";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethernetphy0: ethernet-phy@0 {
+		reg = <0>;
+		smsc,disable-energy-detect;
+	};
+};
+
+&epwmss1 {
+	status = "okay";
+
+	ehrpwm1: pwm@48302200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm1_pins>;
+		status = "okay";
+	};
+};
+
+&gpio1 {
+	hmtc_rst {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_reset";
+	};
+
+	hmtc_prog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_program";
+	};
+};
+
+&gpio3 {
+	zgb_rst {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "zigbee_reset";
+	};
+
+	zgb_boot {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "zigbee_boot";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	at24@50 {
+		compatible = "at24,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	slaves = <1>;
+	cpsw_emac0: slave@4a100200  {
+		phy_id = <&davinci_mdio>, <0>;
+		phy-mode = "mii";
+		phy-handle = <&ethernetphy0>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <0x4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	max-frequency = <26000000>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	bus-width = <4>;
+	cap-power-off-card;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	ti,no-init;
+};
+
+&sham {
+	status = "okay";
+};
+
+&tps {
+	compatible = "ti,tps65217";
+	ti,pmic-shutdown-controller;
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-name = "vdds_dpr";
+			regulator-compatible = "dcdc1";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			/*
+			 * VDD_MPU voltage limits 0.95V - 1.26V with
+			 * +/-4% tolerance
+			 */
+			regulator-compatible = "dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1375000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <70000>;
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			/*
+			 * VDD_CORE voltage limits 0.95V - 1.1V with
+			 * +/-4% tolerance
+			 */
+			regulator-name = "vdd_core";
+			regulator-compatible = "dcdc3";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-name = "vio,vrtc,vdds";
+			regulator-compatible = "ldo1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-name = "vdd_3v3aux";
+			regulator-compatible = "ldo2";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-name = "vdd_1v8";
+			regulator-compatible = "ldo3";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-name = "vdd_3v3a";
+			regulator-compatible = "ldo4";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ehrpwm1_pins: pinmux_ehrpwm1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
+		>;
+	};
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 3303c2816..a6efbe6ed 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -19,6 +19,10 @@
 		};
 	};
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -63,12 +67,28 @@
 		default-brightness-level = <6>;
 	};
 
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* audio external oscillator */
+		tlv320aic3x_mclk: oscillator@0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <24576000>;	/* 24.576MHz */
+		};
+	};
+
 	sound {
 		compatible = "ti,da830-evm-audio";
 		ti,model = "AM335x-SL50";
 		ti,audio-codec = <&audio_codec>;
 		ti,mcasp-controller = <&mcasp0>;
-		ti,codec-clock-rate = <12000000>;
+
+		clocks = <&tlv320aic3x_mclk>;
+		clock-names = "mclk";
+
 		ti,audio-routing =
 			"Headphone Jack",	"HPLOUT",
 			"Headphone Jack",	"HPROUT",
@@ -226,7 +246,7 @@
 			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
 			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
 			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2 */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts
new file mode 100644
index 000000000..6431b7db8
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega-rdk.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-wega.dtsi"
+
+/* SoM */
+&i2c_eeprom {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
new file mode 100644
index 000000000..282f6d4b2
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-WEGA";
+	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	regulators {
+		compatible = "simple-bus";
+
+		vcc3v3: fixedregulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux_dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mac {
+	slaves = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+	dual_emac = <1>;
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/* USB */
+&cppi41dma {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index afb4b3a7b..8d8319590 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 &scm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
+	sys_clkin_ck: sys_clkin_ck@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
@@ -163,7 +163,7 @@
 		clock-frequency = <12000000>;
 	};
 
-	dpll_core_ck: dpll_core_ck {
+	dpll_core_ck: dpll_core_ck@490 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
@@ -176,7 +176,7 @@
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_m4_ck: dpll_core_m4_ck {
+	dpll_core_m4_ck: dpll_core_m4_ck@480 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -185,7 +185,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m5_ck: dpll_core_m5_ck {
+	dpll_core_m5_ck: dpll_core_m5_ck@484 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -194,7 +194,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m6_ck: dpll_core_m6_ck {
+	dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -203,14 +203,14 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck {
+	dpll_mpu_ck: dpll_mpu_ck@488 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x0488>, <0x0420>, <0x042c>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_mpu_ck>;
@@ -219,14 +219,14 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck {
+	dpll_ddr_ck: dpll_ddr_ck@494 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x0494>, <0x0434>, <0x0440>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_ddr_ck>;
@@ -243,14 +243,14 @@
 		clock-div = <2>;
 	};
 
-	dpll_disp_ck: dpll_disp_ck {
+	dpll_disp_ck: dpll_disp_ck@498 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x0498>, <0x0448>, <0x0454>;
 	};
 
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
+	dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_disp_ck>;
@@ -260,14 +260,14 @@
 		ti,set-rate-parent;
 	};
 
-	dpll_per_ck: dpll_per_ck {
+	dpll_per_ck: dpll_per_ck@48c {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-j-type-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x048c>, <0x0470>, <0x049c>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck {
+	dpll_per_m2_ck: dpll_per_m2_ck@4ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_ck>;
@@ -292,7 +292,7 @@
 		clock-div = <4>;
 	};
 
-	cefuse_fck: cefuse_fck {
+	cefuse_fck: cefuse_fck@a20 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_clkin_ck>;
@@ -316,7 +316,7 @@
 		clock-div = <732>;
 	};
 
-	clkdiv32k_ick: clkdiv32k_ick {
+	clkdiv32k_ick: clkdiv32k_ick@14c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ck>;
@@ -332,14 +332,14 @@
 		clock-div = <1>;
 	};
 
-	pruss_ocp_gclk: pruss_ocp_gclk {
+	pruss_ocp_gclk: pruss_ocp_gclk@530 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
 		reg = <0x0530>;
 	};
 
-	mmu_fck: mmu_fck {
+	mmu_fck: mmu_fck@914 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_core_m4_ck>;
@@ -347,56 +347,56 @@
 		reg = <0x0914>;
 	};
 
-	timer1_fck: timer1_fck {
+	timer1_fck: timer1_fck@528 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
 		reg = <0x0528>;
 	};
 
-	timer2_fck: timer2_fck {
+	timer2_fck: timer2_fck@508 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x0508>;
 	};
 
-	timer3_fck: timer3_fck {
+	timer3_fck: timer3_fck@50c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x050c>;
 	};
 
-	timer4_fck: timer4_fck {
+	timer4_fck: timer4_fck@510 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x0510>;
 	};
 
-	timer5_fck: timer5_fck {
+	timer5_fck: timer5_fck@518 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x0518>;
 	};
 
-	timer6_fck: timer6_fck {
+	timer6_fck: timer6_fck@51c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x051c>;
 	};
 
-	timer7_fck: timer7_fck {
+	timer7_fck: timer7_fck@504 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x0504>;
 	};
 
-	usbotg_fck: usbotg_fck {
+	usbotg_fck: usbotg_fck@47c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_ck>;
@@ -412,7 +412,7 @@
 		clock-div = <2>;
 	};
 
-	ieee5000_fck: ieee5000_fck {
+	ieee5000_fck: ieee5000_fck@e4 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_core_m4_div2_ck>;
@@ -420,7 +420,7 @@
 		reg = <0x00e4>;
 	};
 
-	wdt1_fck: wdt1_fck {
+	wdt1_fck: wdt1_fck@538 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
@@ -483,21 +483,21 @@
 		clock-div = <2>;
 	};
 
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
 		reg = <0x0520>;
 	};
 
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
 		reg = <0x053c>;
 	};
 
-	gpio0_dbclk: gpio0_dbclk {
+	gpio0_dbclk: gpio0_dbclk@408 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&gpio0_dbclk_mux_ck>;
@@ -505,7 +505,7 @@
 		reg = <0x0408>;
 	};
 
-	gpio1_dbclk: gpio1_dbclk {
+	gpio1_dbclk: gpio1_dbclk@ac {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ick>;
@@ -513,7 +513,7 @@
 		reg = <0x00ac>;
 	};
 
-	gpio2_dbclk: gpio2_dbclk {
+	gpio2_dbclk: gpio2_dbclk@b0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ick>;
@@ -521,7 +521,7 @@
 		reg = <0x00b0>;
 	};
 
-	gpio3_dbclk: gpio3_dbclk {
+	gpio3_dbclk: gpio3_dbclk@b4 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ick>;
@@ -529,7 +529,7 @@
 		reg = <0x00b4>;
 	};
 
-	lcd_gclk: lcd_gclk {
+	lcd_gclk: lcd_gclk@534 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
@@ -545,7 +545,7 @@
 		clock-div = <2>;
 	};
 
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
@@ -553,7 +553,7 @@
 		reg = <0x052c>;
 	};
 
-	gfx_fck_div_ck: gfx_fck_div_ck {
+	gfx_fck_div_ck: gfx_fck_div_ck@52c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&gfx_fclk_clksel_ck>;
@@ -561,14 +561,14 @@
 		ti,max-div = <2>;
 	};
 
-	sysclkout_pre_ck: sysclkout_pre_ck {
+	sysclkout_pre_ck: sysclkout_pre_ck@700 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
 		reg = <0x0700>;
 	};
 
-	clkout2_div_ck: clkout2_div_ck {
+	clkout2_div_ck: clkout2_div_ck@700 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sysclkout_pre_ck>;
@@ -577,7 +577,7 @@
 		reg = <0x0700>;
 	};
 
-	dbg_sysclk_ck: dbg_sysclk_ck {
+	dbg_sysclk_ck: dbg_sysclk_ck@414 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_clkin_ck>;
@@ -585,7 +585,7 @@
 		reg = <0x0414>;
 	};
 
-	dbg_clka_ck: dbg_clka_ck {
+	dbg_clka_ck: dbg_clka_ck@414 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_core_m4_ck>;
@@ -593,7 +593,7 @@
 		reg = <0x0414>;
 	};
 
-	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
+	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck@414 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
@@ -601,7 +601,7 @@
 		reg = <0x0414>;
 	};
 
-	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
+	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck@414 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
@@ -609,7 +609,7 @@
 		reg = <0x0414>;
 	};
 
-	stm_clk_div_ck: stm_clk_div_ck {
+	stm_clk_div_ck: stm_clk_div_ck@414 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&stm_pmd_clock_mux_ck>;
@@ -619,7 +619,7 @@
 		ti,index-power-of-two;
 	};
 
-	trace_clk_div_ck: trace_clk_div_ck {
+	trace_clk_div_ck: trace_clk_div_ck@414 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&trace_pmd_clk_mux_ck>;
@@ -629,7 +629,7 @@
 		ti,index-power-of-two;
 	};
 
-	clkout2_ck: clkout2_ck {
+	clkout2_ck: clkout2_ck@700 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkout2_div_ck>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 21fcc440f..559977228 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -45,19 +45,9 @@
 			device_type = "cpu";
 			reg = <0>;
 
-			/*
-			 * To consider voltage drop between PMIC and SoC,
-			 * tolerance value is reduced to 2% from 4% and
-			 * voltage value is increased as a precaution.
-			 */
-			operating-points = <
-				/* kHz    uV */
-				720000  1285000
-				600000  1225000
-				500000  1125000
-				275000  1125000
-			>;
-			voltage-tolerance = <2>; /* 2 percentage */
+			operating-points-v2 = <&cpu0_opp_table>;
+			ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>;
+			ti,syscon-rev = <&scm_conf 0x600>;
 
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
@@ -66,6 +56,78 @@
 		};
 	};
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		/*
+		 * The three following nodes are marked with opp-suspend
+		 * because the can not be enabled simultaneously on a
+		 * single SoC.
+		 */
+		opp50@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <950000 931000 969000>;
+			opp-supported-hw = <0x06 0x0010>;
+			opp-suspend;
+		};
+
+		opp100@275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0x00FF>;
+			opp-suspend;
+		};
+
+		opp100@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0020>;
+			opp-suspend;
+		};
+
+		opp100@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		opp100@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0040>;
+		};
+
+		opp120@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		opp120@720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x06 0x0080>;
+		};
+
+		oppturbo@720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		oppturbo@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x06 0x0100>;
+		};
+
+		oppnitro@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1325000 1298500 1351500>;
+			opp-supported-hw = <0x04 0x0200>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupts = <3>;
@@ -103,6 +165,15 @@
 			#size-cells = <1>;
 			ranges = <0 0x44c00000 0x280000>;
 
+			wkup_m3: wkup_m3@100000 {
+				compatible = "ti,am3352-wkup-m3";
+				reg = <0x100000 0x4000>,
+				      <0x180000	0x2000>;
+				reg-names = "umem", "dmem";
+				ti,hwmods = "wkup_m3";
+				ti,pm-firmware = "/*(DEBLOBBED)*/";
+			};
+
 			prcm: prcm@200000 {
 				compatible = "ti,am3-prcm";
 				reg = <0x200000 0x4000>;
@@ -144,6 +215,22 @@
 					};
 				};
 
+				wkup_m3_ipc: wkup_m3_ipc@1324 {
+					compatible = "ti,am3352-wkup-m3-ipc";
+					reg = <0x1324 0x24>;
+					interrupts = <78>;
+					ti,rproc = <&wkup_m3>;
+					mboxes = <&mailbox &mbox_wkupm3>;
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
 				scm_clockdomains: clockdomains {
 				};
 			};
@@ -157,12 +244,44 @@
 		};
 
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+			interrupt-names = "edma3_ccint", "edma3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 0>;
+
+			ti,edma-memcpy-channels = <20 21>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <112>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <113>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <114>;
+			interrupt-names = "edma3_tcerrint";
 		};
 
 		gpio0: gpio@44e07000 {
@@ -210,40 +329,40 @@
 		};
 
 		uart0: serial@44e09000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			reg = <0x44e09000 0x2000>;
 			interrupts = <72>;
 			status = "disabled";
-			dmas = <&edma 26>, <&edma 27>;
+			dmas = <&edma 26 0>, <&edma 27 0>;
 			dma-names = "tx", "rx";
 		};
 
 		uart1: serial@48022000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			reg = <0x48022000 0x2000>;
 			interrupts = <73>;
 			status = "disabled";
-			dmas = <&edma 28>, <&edma 29>;
+			dmas = <&edma 28 0>, <&edma 29 0>;
 			dma-names = "tx", "rx";
 		};
 
 		uart2: serial@48024000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			reg = <0x48024000 0x2000>;
 			interrupts = <74>;
 			status = "disabled";
-			dmas = <&edma 30>, <&edma 31>;
+			dmas = <&edma 30 0>, <&edma 31 0>;
 			dma-names = "tx", "rx";
 		};
 
 		uart3: serial@481a6000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 			reg = <0x481a6000 0x2000>;
@@ -252,7 +371,7 @@
 		};
 
 		uart4: serial@481a8000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			reg = <0x481a8000 0x2000>;
@@ -261,7 +380,7 @@
 		};
 
 		uart5: serial@481aa000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			reg = <0x481aa000 0x2000>;
@@ -305,8 +424,8 @@
 			ti,dual-volt;
 			ti,needs-special-reset;
 			ti,needs-special-hs-handling;
-			dmas = <&edma 24
-				&edma 25>;
+			dmas = <&edma_xbar 24 0 0
+				&edma_xbar 25 0 0>;
 			dma-names = "tx", "rx";
 			interrupts = <64>;
 			interrupt-parent = <&intc>;
@@ -318,8 +437,8 @@
 			compatible = "ti,omap4-hsmmc";
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
+			dmas = <&edma 2 0
+				&edma 3 0>;
 			dma-names = "tx", "rx";
 			interrupts = <28>;
 			interrupt-parent = <&intc>;
@@ -382,6 +501,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};
@@ -457,10 +577,10 @@
 			interrupts = <65>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi0";
-			dmas = <&edma 16
-				&edma 17
-				&edma 18
-				&edma 19>;
+			dmas = <&edma 16 0
+				&edma 17 0
+				&edma 18 0
+				&edma 19 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -473,10 +593,10 @@
 			interrupts = <125>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi1";
-			dmas = <&edma 42
-				&edma 43
-				&edma 44
-				&edma 45>;
+			dmas = <&edma 42 0
+				&edma 43 0
+				&edma 44 0
+				&edma 45 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -621,20 +741,24 @@
 				  0x48300200 0x48300200 0x80>; /* EHRPWM */
 
 			ecap0: ecap@48300100 {
-				compatible = "ti,am33xx-ecap";
+				compatible = "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				interrupts = <31>;
 				interrupt-names = "ecap0";
-				ti,hwmods = "ecap0";
 				status = "disabled";
 			};
 
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am33xx-ehrpwm";
+			ehrpwm0: pwm@48300200 {
+				compatible = "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
+				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -651,20 +775,24 @@
 				  0x48302200 0x48302200 0x80>; /* EHRPWM */
 
 			ecap1: ecap@48302100 {
-				compatible = "ti,am33xx-ecap";
+				compatible = "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				interrupts = <47>;
 				interrupt-names = "ecap1";
-				ti,hwmods = "ecap1";
 				status = "disabled";
 			};
 
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am33xx-ehrpwm";
+			ehrpwm1: pwm@48302200 {
+				compatible = "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
+				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -681,26 +809,30 @@
 				  0x48304200 0x48304200 0x80>; /* EHRPWM */
 
 			ecap2: ecap@48304100 {
-				compatible = "ti,am33xx-ecap";
+				compatible = "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				interrupts = <61>;
 				interrupt-names = "ecap2";
-				ti,hwmods = "ecap2";
 				status = "disabled";
 			};
 
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am33xx-ehrpwm";
+			ehrpwm2: pwm@48304200 {
+				compatible = "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
+				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
 
 		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
+			compatible = "ti,am335x-cpsw","ti,cpsw";
 			ti,hwmods = "cpgmac0";
 			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
 			clock-names = "fck", "cpts";
@@ -708,7 +840,6 @@
 			ale_entries = <1024>;
 			bd_ram_size = <0x2000>;
 			no_bd_ram = <0>;
-			rx_descs = <64>;
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
@@ -731,7 +862,7 @@
 			status = "disabled";
 
 			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,davinci_mdio";
+				compatible = "ti,cpsw-mdio","ti,davinci_mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				ti,hwmods = "davinci_mdio";
@@ -762,14 +893,6 @@
 			reg = <0x40300000 0x10000>; /* 64k */
 		};
 
-		wkup_m3: wkup_m3@44d00000 {
-			compatible = "ti,am3353-wkup-m3";
-			reg = <0x44d00000 0x4000	/* M3 UMEM */
-			       0x44d80000 0x2000>;	/* M3 DMEM */
-			ti,hwmods = "wkup_m3";
-			ti,no-reset-on-init;
-		};
-
 		elm: elm@48080000 {
 			compatible = "ti,am3352-elm";
 			reg = <0x48080000 0x2000>;
@@ -810,10 +933,16 @@
 			ti,no-idle-on-init;
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
+			dmas = <&edma 52 0>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <7>;
 			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 			status = "disabled";
 		};
 
@@ -822,7 +951,7 @@
 			ti,hwmods = "sham";
 			reg = <0x53100000 0x200>;
 			interrupts = <109>;
-			dmas = <&edma 36>;
+			dmas = <&edma 36 0>;
 			dma-names = "rx";
 		};
 
@@ -831,8 +960,8 @@
 			ti,hwmods = "aes";
 			reg = <0x53500000 0xa0>;
 			interrupts = <103>;
-			dmas = <&edma 6>,
-			       <&edma 5>;
+			dmas = <&edma 6 0>,
+			       <&edma 5 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -845,8 +974,8 @@
 			interrupts = <80>, <81>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 8>,
-				<&edma 9>;
+			dmas = <&edma 8 2>,
+				<&edma 9 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -859,8 +988,8 @@
 			interrupts = <82>, <83>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 10>,
-				<&edma 11>;
+			dmas = <&edma 10 2>,
+				<&edma 11 2>;
 			dma-names = "tx", "rx";
 		};
 
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
index 2d40b3f24..f9d8f3948 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -20,7 +20,7 @@
 		reg = <0x80000000 0x10000000>;	/* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +77,7 @@
 &omap3_pmx_core {
 	tps_pins: pinmux_tps_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index 18cc826e9..00dd1f091 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 &scm_clocks {
-	emac_ick: emac_ick {
+	emac_ick: emac_ick@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
@@ -16,7 +16,7 @@
 		ti,bit-shift = <1>;
 	};
 
-	emac_fck: emac_fck {
+	emac_fck: emac_fck@32c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&rmii_ck>;
@@ -24,7 +24,7 @@
 		ti,bit-shift = <9>;
 	};
 
-	vpfe_ick: vpfe_ick {
+	vpfe_ick: vpfe_ick@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
@@ -32,7 +32,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	vpfe_fck: vpfe_fck {
+	vpfe_fck: vpfe_fck@32c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pclk_ck>;
@@ -40,7 +40,7 @@
 		ti,bit-shift = <10>;
 	};
 
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
+	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
@@ -48,7 +48,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
+	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_ck>;
@@ -56,7 +56,7 @@
 		ti,bit-shift = <8>;
 	};
 
-	hecc_ck: hecc_ck {
+	hecc_ck: hecc_ck@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&sys_ck>;
@@ -65,7 +65,7 @@
 	};
 };
 &cm_clocks {
-	ipss_ick: ipss_ick {
+	ipss_ick: ipss_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-interface-clock";
 		clocks = <&core_l3_ick>;
@@ -85,7 +85,7 @@
 		clock-frequency = <27000000>;
 	};
 
-	uart4_ick_am35xx: uart4_ick_am35xx {
+	uart4_ick_am35xx: uart4_ick_am35xx@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -93,7 +93,7 @@
 		ti,bit-shift = <23>;
 	};
 
-	uart4_fck_am35xx: uart4_fck_am35xx {
+	uart4_fck_am35xx: uart4_fck_am35xx@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_48m_fck>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ade28c790..a51969d17 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -23,8 +23,14 @@
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
 		ethernet0 = &cpsw_emac0;
 		ethernet1 = &cpsw_emac1;
+		spi0 = &qspi;
 	};
 
 	cpus {
@@ -38,10 +44,49 @@
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
 
+			operating-points-v2 = <&cpu0_opp_table>;
+			ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>;
+			ti,syscon-rev = <&scm_conf 0x600>;
+
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp50@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <950000 931000 969000>;
+			opp-supported-hw = <0xFF 0x01>;
+			opp-suspend;
+		};
+
+		opp100@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0xFF 0x04>;
+		};
+
+		opp120@720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0xFF 0x08>;
+		};
+
+		oppturbo@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0xFF 0x10>;
+		};
+
+		oppnitro@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1325000 1298500 1351500>;
+			opp-supported-hw = <0xFF 0x20>;
+		};
+	};
+
 	gic: interrupt-controller@48241000 {
 		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
@@ -59,6 +104,27 @@
 		interrupt-parent = <&gic>;
 	};
 
+	scu: scu@48240000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x48240000 0x100>;
+	};
+
+	global_timer: timer@48240200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x48240200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gic>;
+		clocks = <&mpu_periphclk>;
+	};
+
+	local_timer: timer@48240600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x48240600 0x100>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gic>;
+		clocks = <&mpu_periphclk>;
+	};
+
 	l2-cache-controller@48242000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x48242000 0x1000>;
@@ -83,9 +149,19 @@
 			#size-cells = <1>;
 			ranges = <0 0x44c00000 0x287000>;
 
+			wkup_m3: wkup_m3@100000 {
+				compatible = "ti,am4372-wkup-m3";
+				reg = <0x100000 0x4000>,
+				      <0x180000	0x2000>;
+				reg-names = "umem", "dmem";
+				ti,hwmods = "wkup_m3";
+				ti,pm-firmware = "/*(DEBLOBBED)*/";
+			};
+
 			prcm: prcm@1f0000 {
 				compatible = "ti,am4-prcm";
 				reg = <0x1f0000 0x11000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 
 				prcm_clocks: clocks {
 					#address-cells = <1>;
@@ -127,6 +203,22 @@
 					};
 				};
 
+				wkup_m3_ipc: wkup_m3_ipc@1324 {
+					compatible = "ti,am4372-wkup-m3-ipc";
+					reg = <0x1324 0x44>;
+					interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+					ti,rproc = <&wkup_m3>;
+					mboxes = <&mailbox &mbox_wkupm3>;
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <64>;
+					dma-masters = <&edma>;
+				};
+
 				scm_clockdomains: clockdomains {
 				};
 			};
@@ -139,14 +231,46 @@
 		};
 
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_ccint", "edma3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 0>;
+
+			ti,edma-memcpy-channels = <58 59>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
 		};
 
 		uart0: serial@44e09000 {
@@ -205,6 +329,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};
@@ -308,11 +433,14 @@
 		};
 
 		rtc: rtc@44e3e000 {
-			compatible = "ti,am4372-rtc","ti,da830-rtc";
+			compatible = "ti,am4372-rtc", "ti,am3352-rtc",
+				     "ti,da830-rtc";
 			reg = <0x44e3e000 0x1000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "rtc";
+			clocks = <&clk_32768_ck>;
+			clock-names = "int-clk";
 			status = "disabled";
 		};
 
@@ -448,8 +576,8 @@
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
-			dmas = <&edma 24
-				&edma 25>;
+			dmas = <&edma 24 0>,
+				<&edma 25 0>;
 			dma-names = "tx", "rx";
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -460,8 +588,8 @@
 			reg = <0x481d8000 0x1000>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
+			dmas = <&edma 2 0>,
+				<&edma 3 0>;
 			dma-names = "tx", "rx";
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -527,23 +655,26 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
+				 <&dpll_clksel_mac_clk>;
+			clock-names = "fck", "cpts", "50mclk";
+			assigned-clocks = <&dpll_clksel_mac_clk>;
+			assigned-clock-rates = <50000000>;
 			status = "disabled";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
 			bd_ram_size = <0x2000>;
 			no_bd_ram = <0>;
-			rx_descs = <64>;
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
 			cpts_clock_mult = <0x80000000>;
 			cpts_clock_shift = <29>;
 			ranges;
+			syscon = <&scm_conf>;
 
 			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,am4372-mdio","ti,davinci_mdio";
+				compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
 				reg = <0x4a101000 0x100>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -579,18 +710,24 @@
 			status = "disabled";
 
 			ecap0: ecap@48300100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				compatible = "ti,am4372-ecap",
+					     "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
-				ti,hwmods = "ecap0";
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				status = "disabled";
 			};
 
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+			ehrpwm0: pwm@48300200 {
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
+				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -605,18 +742,24 @@
 			status = "disabled";
 
 			ecap1: ecap@48302100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				compatible = "ti,am4372-ecap",
+					     "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
-				ti,hwmods = "ecap1";
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				status = "disabled";
 			};
 
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+			ehrpwm1: pwm@48302200 {
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
+				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -631,18 +774,24 @@
 			status = "disabled";
 
 			ecap2: ecap@48304100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				compatible = "ti,am4372-ecap",
+					     "ti,am3352-ecap",
+					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48304100 0x80>;
-				ti,hwmods = "ecap2";
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
 				status = "disabled";
 			};
 
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+			ehrpwm2: pwm@48304200 {
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
+				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -656,11 +805,14 @@
 			ti,hwmods = "epwmss3";
 			status = "disabled";
 
-			ehrpwm3: ehrpwm@48306200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+			ehrpwm3: pwm@48306200 {
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48306200 0x80>;
-				ti,hwmods = "ehrpwm3";
+				clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -674,11 +826,14 @@
 			ti,hwmods = "epwmss4";
 			status = "disabled";
 
-			ehrpwm4: ehrpwm@48308200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+			ehrpwm4: pwm@48308200 {
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48308200 0x80>;
-				ti,hwmods = "ehrpwm4";
+				clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -692,11 +847,14 @@
 			ti,hwmods = "epwmss5";
 			status = "disabled";
 
-			ehrpwm5: ehrpwm@4830a200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+			ehrpwm5: pwm@4830a200 {
+				compatible = "ti,am4372-ehrpwm",
+					     "ti,am3352-ehrpwm",
+					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x4830a200 0x80>;
-				ti,hwmods = "ehrpwm5";
+				clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+				clock-names = "tbclk", "fck";
 				status = "disabled";
 			};
 		};
@@ -725,7 +883,7 @@
 			compatible = "ti,omap5-sham";
 			ti,hwmods = "sham";
 			reg = <0x53100000 0x300>;
-			dmas = <&edma 36>;
+			dmas = <&edma 36 0>;
 			dma-names = "rx";
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -735,8 +893,8 @@
 			ti,hwmods = "aes";
 			reg = <0x53501000 0xa0>;
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6
-				&edma 5>;
+			dmas = <&edma 6 0>,
+				<&edma 5 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -745,11 +903,18 @@
 			ti,hwmods = "des";
 			reg = <0x53701000 0xa0>;
 			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34
-				&edma 33>;
+			dmas = <&edma 34 0>,
+				<&edma 33 0>;
 			dma-names = "tx", "rx";
 		};
 
+		rng: rng@48310000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48310000 0x2000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		mcasp0: mcasp@48038000 {
 			compatible = "ti,am33xx-mcasp-audio";
 			ti,hwmods = "mcasp0";
@@ -759,8 +924,8 @@
 			interrupts = <80>, <81>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 8>,
-			       <&edma 9>;
+			dmas = <&edma 8 2>,
+			       <&edma 9 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -773,8 +938,8 @@
 			interrupts = <82>, <83>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 10>,
-			       <&edma 11>;
+			dmas = <&edma 10 2>,
+			       <&edma 11 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -791,6 +956,8 @@
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
+			dmas = <&edma 52 0>;
+			dma-names = "rxtx";
 			clocks = <&l3s_gclk>;
 			clock-names = "fck";
 			reg = <0x50000000 0x2000>;
@@ -799,21 +966,13 @@
 			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 			status = "disabled";
 		};
 
-		am43xx_control_usb2phy1: control-phy@44e10620 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10620 0x4>;
-			reg-names = "power";
-		};
-
-		am43xx_control_usb2phy2: control-phy@0x44e10628 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10628 0x4>;
-			reg-names = "power";
-		};
-
 		ocp2scp0: ocp2scp@483a8000 {
 			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
 			#address-cells = <1>;
@@ -824,7 +983,7 @@
 			usb2_phy1: phy@483a8000 {
 				compatible = "ti,am437x-usb2";
 				reg = <0x483a8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy1>;
+				syscon-phy-power = <&scm_conf 0x620>;
 				clocks = <&usb_phy0_always_on_clk32k>,
 					 <&usb_otg_ss0_refclk960m>;
 				clock-names = "wkupclk", "refclk";
@@ -843,7 +1002,7 @@
 			usb2_phy2: phy@483e8000 {
 				compatible = "ti,am437x-usb2";
 				reg = <0x483e8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy2>;
+				syscon-phy-power = <&scm_conf 0x628>;
 				clocks = <&usb_phy1_always_on_clk32k>,
 					 <&usb_otg_ss1_refclk960m>;
 				clock-names = "wkupclk", "refclk";
@@ -865,7 +1024,12 @@
 			usb1: usb@48390000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x48390000 0x10000>;
-				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
@@ -889,7 +1053,12 @@
 			usb2: usb@483d0000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x483d0000 0x10000>;
-				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
@@ -902,7 +1071,9 @@
 
 		qspi: qspi@47900000 {
 			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>;
+			reg = <0x47900000 0x100>,
+			      <0x30000000 0x4000000>;
+			reg-names = "qspi_base", "qspi_mmap";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "qspi";
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
new file mode 100644
index 000000000..9551c4713
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -0,0 +1,421 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am4372.dtsi"
+
+/ {
+	model = "CompuLab CM-T43";
+	compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ledb {
+			label = "cm-t43:green";
+			gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vmmc_3v3: fixedregulator-v3_3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+};
+
+&am43xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cm_t43_led_pins>;
+
+	cm_t43_led_pins: cm_t43_led_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa78, MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	emmc_pins: emmc_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
+			AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
+			AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
+			AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
+			AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
+			AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
+			AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
+			AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+			AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP  | MUX_MODE0)
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM4372_IOPAD(0xa74, MUX_MODE3)
+			/* Slave 2 */
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.txen */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a1.rxctl */
+			AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.txd3 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.txd2 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.txd1 */
+			AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.txd0 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.tclk */
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a7.rclk */
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a8.rxd3 */
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a9.rxd2 */
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a10.rxd1 */
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a11.rxd0 */
+			AM4372_IOPAD(0xa38, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x1000000>;
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MTD partition table */
+		partition@0 {
+			label = "kernel";
+			reg = <0x0 0x00980000>;
+		};
+		partition@980000 {
+			label = "dtb";
+			reg = <0x00980000 0x00080000>;
+		};
+		partition@a00000 {
+			label = "rootfs";
+			reg = <0x00a00000 0x0>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		compatible = "ti,tps65218";
+		reg = <0x24>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdcdc3";
+			regulator-suspend-enable;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	eeprom_module: at24@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmc_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	dmas = <&edma 16
+		&edma 17>;
+	dma-names = "tx0", "rx0";
+
+	flash: w25q64cvzpig@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "uboot environment";
+			reg = <0xc0000 0x40000>;
+		};
+
+		partition@100000 {
+			label = "reserved";
+			reg = <0x100000 0x100000>;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
+};
+
+&dwc3_1 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&dwc3_2 {
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "peripheral", "host", "otg";
+};
+
+&elm {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordiante-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+	operating-points = <1000000 1330000>,
+			   <800000 1260000>,
+			   <720000 1200000>,
+			   <600000 1100000>,
+			   <300000 950000>;
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 84aa30c32..14677d599 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -21,12 +21,11 @@
 
 	aliases {
 		display0 = &lcd0;
-		serial3 = &uart3;
 	};
 
-	vmmcsd_fixed: fixedregulator-sd {
+	evm_v3_3d: fixedregulator-v3_3d {
 		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
+		regulator-name = "evm_v3_3d";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
@@ -83,17 +82,6 @@
 		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
 		label = "lcd";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-
 		panel-timing {
 			clock-frequency = <33000000>;
 			hactive = <800>;
@@ -124,6 +112,39 @@
 		clock-frequency = <12000000>;
 	};
 
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-GP-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
+	};
 };
 
 &am43xx_pinmux {
@@ -133,280 +154,347 @@
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: i2c1_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+			AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM4372_IOPAD(0x964, MUX_MODE0)       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 		>;
 	};
 
 	pixcir_ts_pins: pixcir_ts_pins {
 		pinctrl-single,pins = <
-			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+			AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	nand_flash_x8: nand_flash_x8 {
 		pinctrl-single,pins = <
-			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
-			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM4372_IOPAD(0x800, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM4372_IOPAD(0x804, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM4372_IOPAD(0x808, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM4372_IOPAD(0x810, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM4372_IOPAD(0x814, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM4372_IOPAD(0x818, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 
 	dss_pins: dss_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 
 		>;
 	};
 
-	lcd_pins: lcd_pins {
+	display_mux_pins: display_mux_pins {
 		pinctrl-single,pins = <
 			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
 		>;
 	};
 
 	dcan0_default: dcan0_default_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
-			0x17c (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+			AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+
+	dcan0_sleep: dcan0_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_ctsn.gpio0_12 */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rtsn.gpio0_13 */
 		>;
 	};
 
 	dcan1_default: dcan1_default_pins {
 		pinctrl-single,pins = <
-			0x180 (PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
-			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+			AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+		>;
+	};
+
+	dcan1_sleep: dcan1_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rxd.gpio0_14 */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_txd.gpio0_15 */
 		>;
 	};
 
 	vpfe0_pins_default: vpfe0_pins_default {
 		pinctrl-single,pins = <
-			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe0_pins_sleep: vpfe0_pins_sleep {
 		pinctrl-single,pins = <
-			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
-			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
-			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
-			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
-			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
-			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
-			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
-			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
-			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
-			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
-			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
-			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
-			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe1_pins_default: vpfe1_pins_default {
 		pinctrl-single,pins = <
-			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
-			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
-			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
-			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
-			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
-			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
-			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
-			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
-			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
-			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
-			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
-			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
-			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+			AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
 		>;
 	};
 
 	vpfe1_pins_sleep: vpfe1_pins_sleep {
 		pinctrl-single,pins = <
-			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
-			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
-			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
-			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
-			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
-			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
-			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
-			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
-			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
-			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
-			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
-			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
-			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+			AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
 		>;
 	};
 
 	mmc3_pins_default: pinmux_mmc3_pins_default {
 		pinctrl-single,pins = <
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
 		>;
 	};
 
 	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
 		pinctrl-single,pins = <
-			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
 		>;
 	};
 
 	wlan_pins_default: pinmux_wlan_pins_default {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
 		>;
 	};
 
 	wlan_pins_sleep: pinmux_wlan_pins_sleep {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
 		>;
 	};
 
 	uart3_pins: uart3_pins {
 		pinctrl-single,pins = <
-			0x228 (PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
-			0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
-			0x230 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
-			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+			AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+			AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_sleep_pins: mcasp1_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	gpio0_pins: gpio0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+		>;
+	};
+
+	emmc_pins_default: emmc_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+		>;
+	};
+
+	emmc_pins_sleep: emmc_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
 		>;
 	};
 };
@@ -455,6 +543,8 @@
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		dcdc6: regulator-dcdc6 {
@@ -462,6 +552,8 @@
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		ldo1: regulator-ldo1 {
@@ -498,13 +590,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
+		/*
+		 * 0x264 represents the offset of padconf register of
+		 * gpio3_22 from am43xx_pinmux base.
+		 */
+		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tsc", "wakeup";
+
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
+		wakeup-source;
 	};
 
 	ov2659@30 {
@@ -521,6 +620,19 @@
 			};
 		};
 	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
+		AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
+	};
 };
 
 &epwmss0 {
@@ -542,7 +654,23 @@
 };
 
 &gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_pins>;
 	status = "okay";
+
+	p23 {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		/* SelEMMCorNAND selects between eMMC and NAND:
+		 * Low: NAND
+		 * High: eMMC
+		 * When changing this line make sure the newly
+		 * selected device node is enabled and the previously
+		 * selected device node is disabled.
+		 */
+		output-low;
+		line-name = "SelEMMCorNAND";
+	};
 };
 
 &gpio1 {
@@ -558,25 +686,54 @@
 };
 
 &gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 	ti,no-reset-on-init;
+
+	p8 {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
 };
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
+	vmmc-supply = <&evm_v3_3d>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+/* eMMC sits on mmc2 */
+&mmc2 {
+	/*
+	 * When enabling eMMC, disable GPMC/NAND and set
+	 * SelEMMCorNAND to output-high
+	 */
+	status = "disabled";
+	vmmc-supply = <&evm_v3_3d>;
+	bus-width = <8>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_sleep>;
+	ti,non-removable;
 };
 
 &mmc3 {
 	status = "okay";
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 30
-		&edma 31>;
+	dmas = <&edma_xbar 30 0 1>,
+		<&edma_xbar 31 0 2>;
 	dma-names = "tx", "rx";
 	vmmc-supply = <&vmmcwl_fixed>;
 	bus-width = <4>;
@@ -597,11 +754,6 @@
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 30
-					    2 31>;
-};
-
 &uart3 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -651,12 +803,21 @@
 };
 
 &gpmc {
+	/*
+	 * When enabling GPMC, disable eMMC and set
+	 * SelEMMCorNAND to output-low
+	 */
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -675,11 +836,9 @@
 		gpmc,access-ns = <30>;
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
@@ -738,7 +897,7 @@
 	pinctrl-0 = <&dss_pins>;
 
 	port {
-		dpi_out: endpoint@0 {
+		dpi_out: endpoint {
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
@@ -746,14 +905,16 @@
 };
 
 &dcan0 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan0_default>;
+	pinctrl-1 = <&dcan0_sleep>;
 	status = "okay";
 };
 
 &dcan1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan1_default>;
+	pinctrl-1 = <&dcan1_sleep>;
 	status = "okay";
 };
 
@@ -790,3 +951,31 @@
 		};
 	};
 };
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>; /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 378344271..12a695183 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -110,142 +110,149 @@
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
 };
 
 &am43xx_pinmux {
 	gpio_keys_pins_default: gpio_keys_pins_default {
 		pinctrl-single,pins = <
-			0x1b8 (PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
+			AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
 		>;
 	};
 
 	i2c0_pins_default: i2c0_pins_default {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c0_pins_sleep: i2c0_pins_sleep {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	i2c2_pins_default: i2c2_pins_default {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
-			0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+			AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+			AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
 		>;
 	};
 
 	i2c2_pins_sleep: i2c2_pins_sleep {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins_default: pinmux_mmc1_pins_default {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	ecap0_pins_default: backlight_pins_default {
 		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	qspi_pins_default: qspi_pins_default {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
 		>;
 	};
 
 	qspi_pins_sleep: qspi_pins_sleep{
 		pinctrl-single,pins = <
-			0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 };
@@ -318,7 +325,7 @@
 	pinctrl-1 = <&mmc1_pins_sleep>;
 	vmmc-supply = <&v3_3d>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &qspi {
@@ -375,6 +382,7 @@
 };
 
 &mac {
+	slaves = <1>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
@@ -394,6 +402,8 @@
 };
 
 &rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts
new file mode 100644
index 000000000..d23260d3a
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-sbc-t43.dts
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am437x-cm-t43.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+	model = "CompuLab CM-T43 on SB-SOM-T43";
+	compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+};
+
+&am43xx_pinmux {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */
+		>;
+	};
+
+	dss_pinctrl_default: dss_pinctrl_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */
+			AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */
+
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	uart0_pins_default: uart0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+			AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_cs0.i2c1_sda  */
+			AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_sclk.i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: i2c2_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_ctsn.i2c2_sda  */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	usb2_phy1_default: usb2_phy1_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	usb2_phy2_default: usb2_phy2_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom_base: at24@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vsb_3v3>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pinctrl_default>;
+
+	port {
+		dpi_lcd_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_default>;
+};
+
+&dwc3_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_phy1_default>;
+};
+
+&dwc3_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_phy2_default>;
+};
+
+&lcd0 {
+	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+			&gpio4 28 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_lcd_out>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index c17097d2c..5687d6b4d 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -24,6 +24,13 @@
 		display0 = &lcd0;
 	};
 
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
@@ -32,14 +39,29 @@
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM437x-SK-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-SK-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
 	};
 
 	matrix_keypad: matrix_keypad@0 {
@@ -135,250 +157,259 @@
 &am43xx_pinmux {
 	matrix_keypad_pins: matrix_keypad_pins {
 		pinctrl-single,pins = <
-			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
-			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
-			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
-			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
+			AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
+			AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
+			AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
+			AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
 		>;
 	};
 
 	leds_pins: leds_pins {
 		pinctrl-single,pins = <
-			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
-			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
-			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
-			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
+			AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
+			AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
 		>;
 	};
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: i2c1_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+			AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 		>;
 	};
 
 	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
+			AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
 		>;
 	};
 
 	vpfe0_pins_default: vpfe0_pins_default {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
-			0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
-			0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
+			AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe0_pins_sleep: vpfe0_pins_sleep {
 		pinctrl-single,pins = <
-			0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x12c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x114 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
 
 			/* Slave 2 */
-			0x58 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x40 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x54 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x50 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x4c (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x48 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x5c (PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x44 (PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
-			0x6c (PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			0x68 (PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x64 (PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x60 (PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
+			AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 
 			/* Slave 2 reset value */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	dss_pins: dss_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT | MUX_MODE1)
-			0x028 (PIN_OUTPUT | MUX_MODE1)
-			0x02c (PIN_OUTPUT | MUX_MODE1)
-			0x030 (PIN_OUTPUT | MUX_MODE1)
-			0x034 (PIN_OUTPUT | MUX_MODE1)
-			0x038 (PIN_OUTPUT | MUX_MODE1)
-			0x03c (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)
-			0x0ac (PIN_OUTPUT | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)
-			0x0bc (PIN_OUTPUT | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)
-			0x0cc (PIN_OUTPUT | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)
-			0x0dc (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
-			0x0ec (PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
+			AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
 
 		>;
 	};
 
 	qspi_pins: qspi_pins {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	lcd_pins: lcd_pins {
 		pinctrl-single,pins = <
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+			AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 		>;
 	};
 
 	usb1_pins: usb1_pins {
 		pinctrl-single,pins = <
-			0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 		>;
 	};
 
 	usb2_pins: usb2_pins {
 		pinctrl-single,pins = <
-			0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 		>;
 	};
 };
@@ -387,7 +418,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps@24 {
 		compatible = "ti,tps65218";
@@ -471,7 +502,7 @@
 
 		reg = <0x38>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <31 0>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 
 		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 
@@ -480,6 +511,7 @@
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -531,7 +563,7 @@
 
 	vmmc-supply = <&dcdc4>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &usb2_phy1 {
@@ -640,8 +672,10 @@
 };
 
 &mcasp1 {
-	pinctrl-names = "default";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
 	status = "okay";
 
@@ -670,6 +704,8 @@
 };
 
 &rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 795d68af6..ad32e5553 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -14,10 +14,11 @@
 #include <dt-bindings/pinctrl/am43xx.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
-	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+	compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
 
 	aliases {
 		display0 = &lcd0;
@@ -31,21 +32,18 @@
 		enable-active-high;
 	};
 
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
 	lcd0: display {
 		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
 		label = "lcd";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-
 		panel-timing {
 			clock-frequency = <33000000>;
 			hactive = <800>;
@@ -108,216 +106,266 @@
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM43-EPOS-EVM";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1LP", "Microphone Jack",
+			"MIC1RP", "Microphone Jack",
+			"MIC1LP", "MICBIAS",
+			"MIC1RP", "MICBIAS",
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPL",
+			"Speaker", "SPR";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3111>;
+			system-clock-frequency = <12000000>;
+		};
+	};
 };
 
 &am43xx_pinmux {
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
 				/* Slave 1 */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
 			>;
 		};
 
 		cpsw_sleep: cpsw_sleep {
 			pinctrl-single,pins = <
 				/* Slave 1 reset value */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
 		davinci_mdio_default: davinci_mdio_default {
 			pinctrl-single,pins = <
 				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 			>;
 		};
 
 		davinci_mdio_sleep: davinci_mdio_sleep {
 			pinctrl-single,pins = <
 				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
 		i2c0_pins: pinmux_i2c0_pins {
 			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+				AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 			>;
 		};
 
 		nand_flash_x8: nand_flash_x8 {
 			pinctrl-single,pins = <
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
-				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+				AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
+				AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+				AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 			>;
 		};
 
 		ecap0_pins: backlight_pins {
 			pinctrl-single,pins = <
-				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+				AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 			>;
 		};
 
 		i2c2_pins: pinmux_i2c2_pins {
 			pinctrl-single,pins = <
-				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
-				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+				AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
+				AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
 			>;
 		};
 
 		spi0_pins: pinmux_spi0_pins {
 			pinctrl-single,pins = <
-				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
-				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
-				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
-				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+				AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
+				AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
+				AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
+				AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
 			>;
 		};
 
 		spi1_pins: pinmux_spi1_pins {
 			pinctrl-single,pins = <
-				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
-				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
-				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
-				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
+				AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
+				AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
+				AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
+				AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
 			>;
 		};
 
 		mmc1_pins: pinmux_mmc1_pins {
 			pinctrl-single,pins = <
-				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+				AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 			>;
 		};
 
 		qspi1_default: qspi1_default {
 			pinctrl-single,pins = <
-				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
-				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
+				AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
 			>;
 		};
 
 		pixcir_ts_pins: pixcir_ts_pins {
 			pinctrl-single,pins = <
-				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
 			>;
 		};
 
 		hdq_pins: pinmux_hdq_pins {
 			pinctrl-single,pins = <
-				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
+				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
 			>;
 		};
 
 		dss_pins: dss_pins {
 			pinctrl-single,pins = <
-				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+				AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 			>;
 		};
 
-		lcd_pins: lcd_pins {
+		display_mux_pins: display_mux_pins {
 			pinctrl-single,pins = <
 				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
-				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
 
 		vpfe1_pins_default: vpfe1_pins_default {
 			pinctrl-single,pins = <
-				0x1cc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
-				0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
-				0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
-				0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
-				0x1dc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
-				0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
-				0x1ec (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
-				0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
-				0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
-				0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
-				0x1fc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
-				0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
-				0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+				AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
 			>;
 		};
 
 		vpfe1_pins_sleep: vpfe1_pins_sleep {
 			pinctrl-single,pins = <
-				0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			>;
+		};
+
+		mcasp1_pins: mcasp1_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+				AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+			>;
+		};
+
+		mcasp1_sleep_pins: mcasp1_sleep_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 };
@@ -328,7 +376,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &mac {
@@ -399,6 +447,15 @@
 			regulator-always-on;
 		};
 
+		dcdc4: regulator-dcdc4 {
+			compatible = "ti,tps65218-dcdc4";
+			regulator-name = "vdcdc4";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
 		dcdc5: regulator-dcdc5 {
 			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
@@ -434,13 +491,30 @@
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
 
 		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
+
+	tlv320aic3111: tlv320aic3111@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3111";
+		reg = <0x18>;
+		status = "okay";
+
+		ai31xx-micbias-vg = <MICBIAS_2_0V>;
+
+		/* Regulators */
+		HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		SPRVDD-supply = <&vbat>; /* vbat */
+		SPLVDD-supply = <&vbat>; /* vbat */
+		AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
+		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
+	};
 };
 
 &i2c2 {
@@ -458,7 +532,21 @@
 };
 
 &gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
+
+	p1 {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
 };
 
 &gpio3 {
@@ -473,9 +561,14 @@
 	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -494,11 +587,9 @@
 		gpmc,access-ns = <30>; /* tCEA + 4*/
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
@@ -663,7 +754,7 @@
 	pinctrl-0 = <&dss_pins>;
 
 	port {
-		dpi_out: endpoint@0 {
+		dpi_out: endpoint {
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
@@ -686,3 +777,26 @@
 		};
 	};
 };
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&synctimer_32kclk {
+	assigned-clocks = <&mux_synctimer32k_ck>;
+	assigned-clock-parents = <&clkdiv32k_ick>;
+};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index d0c0dfa4e..d1d73b725 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 &scm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
+	sys_clkin_ck: sys_clkin_ck@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
@@ -16,7 +16,7 @@
 		reg = <0x0040>;
 	};
 
-	crystal_freq_sel_ck: crystal_freq_sel_ck {
+	crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
@@ -104,7 +104,15 @@
 		clock-div = <1>;
 	};
 
-	ehrpwm0_tbclk: ehrpwm0_tbclk {
+	rng_fck: rng_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4ls_gclk>;
@@ -112,7 +120,7 @@
 		reg = <0x0664>;
 	};
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk {
+	ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4ls_gclk>;
@@ -120,7 +128,7 @@
 		reg = <0x0664>;
 	};
 
-	ehrpwm2_tbclk: ehrpwm2_tbclk {
+	ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4ls_gclk>;
@@ -128,7 +136,7 @@
 		reg = <0x0664>;
 	};
 
-	ehrpwm3_tbclk: ehrpwm3_tbclk {
+	ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4ls_gclk>;
@@ -136,7 +144,7 @@
 		reg = <0x0664>;
 	};
 
-	ehrpwm4_tbclk: ehrpwm4_tbclk {
+	ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4ls_gclk>;
@@ -144,7 +152,7 @@
 		reg = <0x0664>;
 	};
 
-	ehrpwm5_tbclk: ehrpwm5_tbclk {
+	ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4ls_gclk>;
@@ -195,7 +203,7 @@
 		clock-frequency = <26000000>;
 	};
 
-	dpll_core_ck: dpll_core_ck {
+	dpll_core_ck: dpll_core_ck@2d20 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
@@ -208,7 +216,7 @@
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_m4_ck: dpll_core_m4_ck {
+	dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -219,7 +227,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m5_ck: dpll_core_m5_ck {
+	dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -230,7 +238,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m6_ck: dpll_core_m6_ck {
+	dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -241,14 +249,14 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck {
+	dpll_mpu_ck: dpll_mpu_ck@2d60 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_mpu_ck>;
@@ -259,14 +267,22 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck {
+	mpu_periphclk: mpu_periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck@2da0 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2da0>, <0x2da4>, <0x2dac>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_ddr_ck>;
@@ -277,14 +293,14 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_disp_ck: dpll_disp_ck {
+	dpll_disp_ck: dpll_disp_ck@2e20 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
 	};
 
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
+	dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_disp_ck>;
@@ -296,14 +312,14 @@
 		ti,set-rate-parent;
 	};
 
-	dpll_per_ck: dpll_per_ck {
+	dpll_per_ck: dpll_per_ck@2de0 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-j-type-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2de0>, <0x2de4>, <0x2dec>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck {
+	dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_ck>;
@@ -346,7 +362,7 @@
 		clock-div = <732>;
 	};
 
-	clkdiv32k_ick: clkdiv32k_ick {
+	clkdiv32k_ick: clkdiv32k_ick@2a38 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ck>;
@@ -362,7 +378,7 @@
 		clock-div = <1>;
 	};
 
-	pruss_ocp_gclk: pruss_ocp_gclk {
+	pruss_ocp_gclk: pruss_ocp_gclk@4248 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
@@ -375,56 +391,56 @@
 		clock-frequency = <32768>;
 	};
 
-	timer1_fck: timer1_fck {
+	timer1_fck: timer1_fck@4200 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4200>;
 	};
 
-	timer2_fck: timer2_fck {
+	timer2_fck: timer2_fck@4204 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4204>;
 	};
 
-	timer3_fck: timer3_fck {
+	timer3_fck: timer3_fck@4208 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4208>;
 	};
 
-	timer4_fck: timer4_fck {
+	timer4_fck: timer4_fck@420c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x420c>;
 	};
 
-	timer5_fck: timer5_fck {
+	timer5_fck: timer5_fck@4210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4210>;
 	};
 
-	timer6_fck: timer6_fck {
+	timer6_fck: timer6_fck@4214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4214>;
 	};
 
-	timer7_fck: timer7_fck {
+	timer7_fck: timer7_fck@4218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4218>;
 	};
 
-	wdt1_fck: wdt1_fck {
+	wdt1_fck: wdt1_fck@422c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
@@ -479,27 +495,36 @@
 		clock-div = <2>;
 	};
 
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
 		reg = <0x4238>;
 	};
 
+	dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5_ck>;
+		reg = <0x4234>;
+		ti,bit-shift = <2>;
+		ti,dividers = <2>, <5>;
+	};
+
 	clk_32k_mosc_ck: clk_32k_mosc_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4240>;
 	};
 
-	gpio0_dbclk: gpio0_dbclk {
+	gpio0_dbclk: gpio0_dbclk@2b68 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&gpio0_dbclk_mux_ck>;
@@ -507,7 +532,7 @@
 		reg = <0x2b68>;
 	};
 
-	gpio1_dbclk: gpio1_dbclk {
+	gpio1_dbclk: gpio1_dbclk@8c78 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ick>;
@@ -515,7 +540,7 @@
 		reg = <0x8c78>;
 	};
 
-	gpio2_dbclk: gpio2_dbclk {
+	gpio2_dbclk: gpio2_dbclk@8c80 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ick>;
@@ -523,7 +548,7 @@
 		reg = <0x8c80>;
 	};
 
-	gpio3_dbclk: gpio3_dbclk {
+	gpio3_dbclk: gpio3_dbclk@8c88 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ick>;
@@ -531,7 +556,7 @@
 		reg = <0x8c88>;
 	};
 
-	gpio4_dbclk: gpio4_dbclk {
+	gpio4_dbclk: gpio4_dbclk@8c90 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ick>;
@@ -539,7 +564,7 @@
 		reg = <0x8c90>;
 	};
 
-	gpio5_dbclk: gpio5_dbclk {
+	gpio5_dbclk: gpio5_dbclk@8c98 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkdiv32k_ick>;
@@ -555,7 +580,7 @@
 		clock-div = <2>;
 	};
 
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
@@ -563,7 +588,7 @@
 		reg = <0x423c>;
 	};
 
-	gfx_fck_div_ck: gfx_fck_div_ck {
+	gfx_fck_div_ck: gfx_fck_div_ck@423c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&gfx_fclk_clksel_ck>;
@@ -571,7 +596,7 @@
 		ti,max-div = <2>;
 	};
 
-	disp_clk: disp_clk {
+	disp_clk: disp_clk@4244 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
@@ -579,14 +604,14 @@
 		ti,set-rate-parent;
 	};
 
-	dpll_extdev_ck: dpll_extdev_ck {
+	dpll_extdev_ck: dpll_extdev_ck@2e60 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
 	};
 
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
+	dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_extdev_ck>;
@@ -597,14 +622,14 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mux_synctimer32k_ck: mux_synctimer32k_ck {
+	mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
 		reg = <0x4230>;
 	};
 
-	synctimer_32kclk: synctimer_32kclk {
+	synctimer_32kclk: synctimer_32kclk@2a30 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&mux_synctimer32k_ck>;
@@ -612,28 +637,28 @@
 		reg = <0x2a30>;
 	};
 
-	timer8_fck: timer8_fck {
+	timer8_fck: timer8_fck@421c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x421c>;
 	};
 
-	timer9_fck: timer9_fck {
+	timer9_fck: timer9_fck@4220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4220>;
 	};
 
-	timer10_fck: timer10_fck {
+	timer10_fck: timer10_fck@4224 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4224>;
 	};
 
-	timer11_fck: timer11_fck {
+	timer11_fck: timer11_fck@4228 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
@@ -662,7 +687,7 @@
 		clocks = <&dpll_ddr_ck>;
 	};
 
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
+	dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_ddr_x2_ck>;
@@ -673,7 +698,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
+	dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
 		clocks = <&dpll_per_ck>;
@@ -684,7 +709,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dll_aging_clk_div: dll_aging_clk_div {
+	dll_aging_clk_div: dll_aging_clk_div@4250 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkin_ck>;
@@ -716,14 +741,14 @@
 		clock-div = <2>;
 	};
 
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
+	usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4260>;
 	};
 
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
+	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&usbphy_32khz_clkmux>;
@@ -731,7 +756,7 @@
 		reg = <0x2a40>;
 	};
 
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&usbphy_32khz_clkmux>;
@@ -739,7 +764,7 @@
 		reg = <0x2a48>;
 	};
 
-	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
+	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m@8a60 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_clkdcoldo>;
@@ -747,11 +772,65 @@
 		reg = <0x8a60>;
 	};
 
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@8a68 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_clkdcoldo>;
 		ti,bit-shift = <8>;
 		reg = <0x8a68>;
 	};
+
+	clkout1_osc_div_ck: clkout1_osc_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1_src2_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1_src2_pre_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1_src2_post_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
 };
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
new file mode 100644
index 000000000..e3acb9970
--- /dev/null
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+
+/ {
+	model = "TI AM5728 IDK";
+	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
+		     "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	status-leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		cpu1-led {
+			label = "status1:red:cpu1";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu1";
+		};
+
+		usr1-led {
+			label = "status1:green:usr";
+			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	vmmc_aux-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a63bf7819..c4d04c529 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
@@ -24,7 +25,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
+		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
 	vdd_3v3: fixedregulator-vdd_3v3 {
@@ -35,6 +36,14 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	aic_dvdd: fixedregulator-aic_dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd_fixed";
+		vin-supply = <&vdd_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		/* TPS51200 */
 		compatible = "regulator-fixed";
@@ -77,7 +86,7 @@
 		led@3 {
 			label = "beagle-x15:usr3";
 			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 			default-state = "off";
 		};
 	};
@@ -91,20 +100,6 @@
 		#cooling-cells = <2>;
 	};
 
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&extcon_usb1_pins>;
-	};
-
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&extcon_usb2_pins>;
-	};
-
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -149,102 +144,128 @@
 			};
 		};
 	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BeagleBoard-X15";
+		simple-audio-card,widgets =
+			"Line", "Line Out",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Line Out",	"LLOUT",
+			"Line Out",	"RLOUT",
+			"MIC2L",	"Line In",
+			"MIC2R",	"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3104>;
+			clocks = <&clkout2_clk>;
+		};
+	};
 };
 
 &dra7_pmx_core {
 	leds_pins_default: leds_pins_default {
 		pinctrl-single,pins = <
-			0x3a8 (PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
-			0x3ac (PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
-			0x3c0 (PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
-			0x3c4 (PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
+			DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
+			DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
+			DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
+			DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
 		>;
 	};
 
 	i2c1_pins_default: i2c1_pins_default {
 		pinctrl-single,pins = <
-			0x400 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
-			0x404 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
 		>;
 	};
 
 	hdmi_pins: pinmux_hdmi_pins {
 		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
-			0x40c (PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
 		>;
 	};
 
 	i2c3_pins_default: i2c3_pins_default {
 		pinctrl-single,pins = <
-			0x2a4 (PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
-			0x2a8 (PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
+			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
 		>;
 	};
 
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
-			0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 		>;
 	};
 
 	mmc1_pins_default: mmc1_pins_default {
 		pinctrl-single,pins = <
-			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 		>;
 	};
 
 	mmc2_pins_default: mmc2_pins_default {
 		pinctrl-single,pins = <
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 		>;
 	};
 
 	cpsw_pins_default: cpsw_pins_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
-			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
-			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
-			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
-			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
-			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
-			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
-			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
-			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
-			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
-			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
-			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
 
 			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
 		>;
 
 	};
@@ -252,91 +273,109 @@
 	cpsw_pins_sleep: cpsw_pins_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (PIN_INPUT | MUX_MODE15)
-			0x254 (PIN_INPUT | MUX_MODE15)
-			0x258 (PIN_INPUT | MUX_MODE15)
-			0x25c (PIN_INPUT | MUX_MODE15)
-			0x260 (PIN_INPUT | MUX_MODE15)
-			0x264 (PIN_INPUT | MUX_MODE15)
-			0x268 (PIN_INPUT | MUX_MODE15)
-			0x26c (PIN_INPUT | MUX_MODE15)
-			0x270 (PIN_INPUT | MUX_MODE15)
-			0x274 (PIN_INPUT | MUX_MODE15)
-			0x278 (PIN_INPUT | MUX_MODE15)
-			0x27c (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
 
 			/* Slave 2 */
-			0x198 (PIN_INPUT | MUX_MODE15)
-			0x19c (PIN_INPUT | MUX_MODE15)
-			0x1a0 (PIN_INPUT | MUX_MODE15)
-			0x1a4 (PIN_INPUT | MUX_MODE15)
-			0x1a8 (PIN_INPUT | MUX_MODE15)
-			0x1ac (PIN_INPUT | MUX_MODE15)
-			0x1b0 (PIN_INPUT | MUX_MODE15)
-			0x1b4 (PIN_INPUT | MUX_MODE15)
-			0x1b8 (PIN_INPUT | MUX_MODE15)
-			0x1bc (PIN_INPUT | MUX_MODE15)
-			0x1c0 (PIN_INPUT | MUX_MODE15)
-			0x1c4 (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 
 	davinci_mdio_pins_default: davinci_mdio_pins_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
 		>;
 	};
 
 	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
 		pinctrl-single,pins = <
-			0x23c (PIN_INPUT | MUX_MODE15)
-			0x240 (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
-			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
+			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
 		>;
 	};
 
 	tmp102_pins_default: tmp102_pins_default {
 		pinctrl-single,pins = <
-			0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
+			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
 		>;
 	};
 
 	mcp79410_pins_default: mcp79410_pins_default {
 		pinctrl-single,pins = <
-			0x424 (PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
+			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
 		>;
 	};
 
 	usb1_pins: pinmux_usb1_pins {
 		pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 		>;
 	};
 
-	extcon_usb1_pins: extcon_usb1_pins {
+	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
+			DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
 		>;
 	};
 
-	extcon_usb2_pins: extcon_usb2_pins {
+	clkout2_pins_default: clkout2_pins_default {
 		pinctrl-single,pins = <
-			0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
+			DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9)	/* xref_clk0.clkout2 */
 		>;
 	};
 
-	tpd12s015_pins: pinmux_tpd12s015_pins {
+	clkout2_pins_sleep: clkout2_pins_sleep {
 		pinctrl-single,pins = <
-			0x3b0 (PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
-			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
-			0x370 (PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
+			DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15)	/* xref_clk0.clkout2 */
+		>;
+	};
+
+	mcasp3_pins_default: mcasp3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_pins_sleep: mcasp3_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 };
@@ -387,7 +426,7 @@
 					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
 					regulator-name = "smps45";
 					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1150000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
@@ -396,7 +435,7 @@
 					/* VDD_CORE */
 					regulator-name = "smps6";
 					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1030000>;
+					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
@@ -415,11 +454,12 @@
 				/* SMPS9 unused */
 
 				ldo1_reg: ldo1 {
-					/* VDD_SD  */
+					/* VDD_SD / VDDSHV8  */
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
+					regulator-always-on;
 				};
 
 				ldo2_reg: ldo2 {
@@ -432,7 +472,7 @@
 				};
 
 				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
+					/* VDDA_1V8_PHYA */
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -440,6 +480,15 @@
 					regulator-boot-on;
 				};
 
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
 				ldo9_reg: ldo9 {
 					/* VDD_RTC */
 					regulator-name = "ldo9";
@@ -495,6 +544,13 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		};
+
 	};
 
 	tmp102: tmp102@48 {
@@ -506,6 +562,30 @@
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 		#thermal-sensor-cells = <1>;
 	};
+
+	tlv320aic3104: tlv320aic3104@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&clkout2_pins_default>;
+		pinctrl-1 = <&clkout2_pins_sleep>;
+		assigned-clocks = <&clkoutmux2_clk_mux>;
+		assigned-clock-parents = <&sys_clk2_dclk_div>;
+
+		status = "okay";
+		adc-settle-ms = <40>;
+
+		AVDD-supply = <&vdd_3v3>;
+		IOVDD-supply = <&vdd_3v3>;
+		DRVDD-supply = <&vdd_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "at,24c32";
+		reg = <0x50>;
+	};
 };
 
 &i2c3 {
@@ -517,7 +597,9 @@
 	mcp_rtc: rtc@6f {
 		compatible = "microchip,mcp7941x";
 		reg = <0x6f>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;  /* IRQ_SYS_1N */
+		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+				      <&dra7_pmx_core 0x424>;
+		interrupt-names = "irq", "wakeup";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcp79410_pins_default>;
@@ -579,10 +661,8 @@
 	pinctrl-0 = <&mmc1_pins_default>;
 
 	vmmc-supply = <&ldo1_reg>;
-	vmmc_aux-supply = <&vdd_3v3>;
-	pbias-supply = <&pbias_mmc_reg>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 };
 
 &mmc2 {
@@ -615,15 +695,19 @@
 	pinctrl-0 = <&usb1_pins>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };
 
 &usb2 {
+	/*
+	 * Stand alone usage is peripheral only.
+	 * However, with some resistor modifications
+	 * this port can be used via expansion connectors
+	 * as "host" or "dual-role". If so, provide
+	 * the necessary dr_mode override in the expansion
+	 * board's DT.
+	 */
 	dr_mode = "peripheral";
 };
 
@@ -682,7 +766,7 @@
 
 &hdmi {
 	status = "ok";
-	vdda-supply = <&ldo3_reg>;
+	vdda-supply = <&ldo4_reg>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_pins>;
@@ -693,3 +777,46 @@
 		};
 	};
 };
+
+&pcie1 {
+	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins_default>;
+	pinctrl-1 = <&mcasp3_pins_sleep>;
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&sys_clkin2>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
new file mode 100644
index 000000000..378b142ef
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -0,0 +1,617 @@
+/*
+ * Support for CompuLab CL-SOM-AM57x System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dra74x.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-AM57x";
+	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led@0 {
+			label = "cl-som-am57x:green";
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ads7846reg: fixedregulator-ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+		simple-audio-card,widgets =
+					"Headphone", "Headphone Jack",
+					"Microphone", "Microphone Jack",
+					"Line", "Line Jack";
+		simple-audio-card,routing =
+					"Headphone Jack", "RHPOUT",
+					"Headphone Jack", "LHPOUT",
+					"LLINEIN", "Line Jack",
+					"MICIN", "Mic Bias",
+					"Mic Bias", "Microphone Jack";
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&dra7_pmx_core {
+	leds_pins_default: leds_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14)	/* gpmc_a15.gpio2_5 */
+		>;
+	};
+
+	i2c1_pins_default: i2c1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
+		>;
+	};
+
+	i2c3_pins_default: i2c3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
+		>;
+	};
+
+	i2c4_pins_default: i2c4_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10)	/* mcasp1_acl.i2c4_sda */
+			DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsr.i2c4_scl */
+		>;
+	};
+
+	tps659038_pins_default: tps659038_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
+			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d0 */
+			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d1 */
+			DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
+			DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs3.qspi1_cs1 */
+		>;
+	};
+
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave at addr 0x0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tclk */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
+
+			/* Slave at addr 0x1 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_tclk */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
+
+			/* Slave 2 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
+			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d11.mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
+		>;
+	};
+
+	mcasp3_pins_default: mcasp3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_pins_sleep: mcasp3_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_default>;
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps659038_pins_default>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVA */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* PMIC_3V3 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_1V8 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* regen1 not used */
+			};
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	rtc0: rtc@56 {
+		compatible = "emmicro,em3027";
+		reg = <0x56>;
+	};
+
+	eeprom_module: atmel@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	wm8731: wm8731@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+		status = "okay";
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+	cap-mmc-dual-data-rate;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_pins>;
+
+	spi-max-frequency = <48000000>;
+
+	spi_flash: spi_flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,m25p80", "jedec,spi-nor";
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <48000000>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "uboot environment";
+			reg = <0xc0000 0x40000>;
+		};
+
+		partition@100000 {
+			label = "reserved";
+			reg = <0x100000 0x0>;
+		};
+	};
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <1>;                              /* CS1 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 0>;
+		pendown-gpio = <&gpio1 31 0>;
+
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		ti,debounce-max = /bits/ 16 <30>;
+		ti,debounce-tol = /bits/ 16 <10>;
+		ti,debounce-rep = /bits/ 16 <1>;
+
+		wakeup-source;
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <0>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&usb2 {
+	dr_mode = "host";
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins_default>;
+	pinctrl-1 = <&mcasp3_pins_sleep>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&gpio3 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/am57xx-commercial-grade.dtsi b/arch/arm/boot/dts/am57xx-commercial-grade.dtsi
new file mode 100644
index 000000000..c18365446
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-commercial-grade.dtsi
@@ -0,0 +1,23 @@
+&cpu_alert0 {
+	temperature = <80000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <90000>; /* milliCelsius */
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
new file mode 100644
index 000000000..0e63b9dff
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -0,0 +1,306 @@
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-industrial-grade.dtsi"
+
+/ {
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "VMAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3_3d: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "V3_3D";
+		vin-supply = <&smps9_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&v3_3d>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x418>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			smps12-in-supply = <&vmain>;
+			smps3-in-supply = <&vmain>;
+			smps45-in-supply = <&vmain>;
+			smps6-in-supply = <&vmain>;
+			smps7-in-supply = <&vmain>;
+			smps8-in-supply = <&vmain>;
+			smps9-in-supply = <&vmain>;
+			ldo1-in-supply = <&vmain>;
+			ldo2-in-supply = <&vmain>;
+			ldo3-in-supply = <&vmain>;
+			ldo4-in-supply = <&vmain>;
+			ldo9-in-supply = <&vmain>;
+			ldoln-in-supply = <&vmain>;
+			ldousb-in-supply = <&vmain>;
+			ldortc-in-supply = <&vmain>;
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					/* VDD_IVA + VDD_DSP on AM571 */
+					regulator-name = "smps45";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* 5728 - VDD_IVAHD */
+					/* 5718 - N.C. test point */
+					regulator-name = "smps8";
+				};
+
+				smps9_reg: smps9 {
+					/* VDD_3_3D */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					/* NOTE: on rev 1.3a, data supply */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDDSH18V */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC  */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x248>;
+};
+
+&rtc {
+	status = "okay";
+	ext-clk-src;
+};
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&usb2 {
+	dr_mode = "otg";
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	bus-width = <8>;
+	ti,non-removable;
+	max-frequency = <96000000>;
+};
diff --git a/arch/arm/boot/dts/am57xx-industrial-grade.dtsi b/arch/arm/boot/dts/am57xx-industrial-grade.dtsi
new file mode 100644
index 000000000..70c8c4ba1
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-industrial-grade.dtsi
@@ -0,0 +1,23 @@
+&cpu_alert0 {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <105000>; /* milliCelsius */
+};
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
new file mode 100644
index 000000000..31f9be632
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -0,0 +1,179 @@
+/*
+ * Support for CompuLab SBC-AM57x single board computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include "am57xx-cl-som-am57x.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
+	compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi;
+	};
+};
+
+&dra7_pmx_core {
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_txd */
+		>;
+	};
+
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdcd.gpio6_27 */
+			DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdwp.gpio6_28 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+		>;
+	};
+
+	i2c5_pins_default: i2c5_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr1.i2c5_scl */
+		>;
+	};
+
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14)      /* vin2a_vsync0.gpio4_0 */
+		>;
+	};
+
+	hdmi_pins: pinmux_hdmi_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
+		>;
+	};
+
+	hdmi_conn_pins: pinmux_hdmi_conn_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14)	/* spi1_cs2.gpio7_12 */
+		>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom_base: atmel@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&ldoln_reg>;
+
+	port {
+		dpi_lcd_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&lcd0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins_default>;
+
+	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+			&gpio4 0 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_lcd_out>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+			lanes = <1 0 3 2 5 4 7 6>;
+		};
+	};
+};
+
+&hdmi_conn {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_conn_pins>;
+
+	hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&hdmi_out>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 4e0ad3b82..9cc372b9f 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -32,15 +32,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -114,7 +105,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
@@ -155,21 +146,21 @@
 			label = "keyswitch_in";
 			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		error_in {
 			label = "error_in";
 			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <29>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		btn {
 			label = "btn";
 			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
 			linux,code = <31>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts
new file mode 100644
index 000000000..e68527b0d
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B";
+};
+
+/*
+ * The revision B has a distinctly different layout of the syscon, so
+ * append a specific compatible-string.
+ */
+&syscon {
+	compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd";
+};
+
+&intc {
+	reg = <0x10101000 0x1000>,
+	      <0x10100100 0x100>;
+};
+
+&L2 {
+	reg = <0x10102000 0x1000>;
+};
+
+&scu {
+	reg = <0x10100000 0x100>;
+};
+
+&twd_timer {
+	reg = <0x10100600 0x20>;
+};
+
+&twd_wdog {
+	reg = <0x10100620 0x20>;
+};
+
+/*
+ * On revision B, we cannot reach the secondary interrupt
+ * controller, as a result, some peripherals that are dependent
+ * on their IRQ cannot be reached, so disable them.
+ */
+&intc_second {
+	status = "disabled";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&serial2 {
+	status = "disabled";
+};
+
+&serial3 {
+	status = "disabled";
+};
+
+&ssp {
+	status = "disabled";
+};
+
+&wdog {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
new file mode 100644
index 000000000..87ff602a2
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C";
+	arm,hbi = <0x146>;
+
+	/*
+	 * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB.
+	 * Reference: ARM DUI 0318F
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb-mpcore -smp cpus=4
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
new file mode 100644
index 000000000..967684b36
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView EB Cortex A9 MPCore";
+
+	/*
+	 * This is the Cortex A9 MPCore tile used with the
+	 * RealView EB.
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
new file mode 100644
index 000000000..7b8d90b7a
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/*
+ * This is the common include file for all MPCore variants of the
+ * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B
+ * and Cortex-A9 MPCore.
+ */
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		/* Primary interrupt controller in the test chip */
+		intc: interrupt-controller@1f000100 {
+			compatible = "arm,eb11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1f001000 0x1000>,
+			      <0x1f000100 0x100>;
+		};
+
+		/* Secondary interrupt controller on the FPGA */
+		intc_second: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,l220-cache";
+			reg = <0x1f002000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s), probably for safety
+			 * since th outer sync operation can cause the
+			 * cache to hang unless disabled.
+			 */
+			cache-size = <1048576>; // 1MB
+			cache-sets = <4096>;
+			cache-line-size = <32>;
+			arm,shared-override;
+			arm,parity-enable;
+			arm,outer-sync-disable;
+		};
+
+		scu: scu@1f000000 {
+			compatible = "arm,arm11mp-scu";
+			reg = <0x1f000000 0x100>;
+		};
+
+		twd_timer: timer@1f000600 {
+			compatible = "arm,arm11mp-twd-timer";
+			reg = <0x1f000600 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0xf04>;
+		};
+
+		twd_wdog: watchdog@1f000620 {
+			compatible = "arm,arm11mp-twd-wdt";
+			reg = <0x1f000620 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 14 0xf04>;
+		};
+
+		/* PMU with one IRQ line per core */
+		pmu: pmu@0 {
+			compatible = "arm,arm11mpcore-pmu";
+			interrupt-parent = <&intc>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			<0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0  IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/*
+ * On revision A, these peripherals does not have their IRQ lines
+ * routed to the core tile, but they can be reached on the secondary
+ * GIC.
+ */
+&gpio0 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&serial3 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&ssp {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&wdog {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm-realview-eb.dts
new file mode 100644
index 000000000..15431077f
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard";
+	compatible = "arm,realview-eb";
+	arm,hbi = <0x140>;
+
+	/*
+	 * This is the core tile with the CPU and GIC etc for the
+	 * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
+	 * or PMU.
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb
+	 * Unless specified, QEMU will emulate an ARM926EJ-S core tile.
+	 * Switches -cpu arm1136 or -cpu arm1176 emulates the other
+	 * core tiles.
+	 */
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		intc: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			<0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
new file mode 100644
index 000000000..e2e959959
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -0,0 +1,444 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "arm,realview-eb";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c;
+	};
+
+	memory {
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+	};
+
+	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x4e000000 0x10000>;
+		/*
+		 * This means the adapter can be accessed with 8, 16 or
+		 * 32 bit reads/writes.
+		 */
+		reg-io-width = <7>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		port1-otg;
+	};
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		i2c: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		charlcd: fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: ssp@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		wdog: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdogclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+
+			panel {
+				compatible = "panel-dpi";
+
+				port {
+					clcd_panel: endpoint {
+						remote-endpoint = <&clcd_pads>;
+					};
+				};
+
+				/* Standard 640x480 VGA timings */
+				panel-timing {
+					clock-frequency = <25175000>;
+					hactive = <640>;
+					hback-porch = <48>;
+					hfront-porch = <16>;
+					hsync-len = <96>;
+					vactive = <480>;
+					vback-porch = <33>;
+					vfront-porch = <10>;
+					vsync-len = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 1bc64cda8..c789564f2 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -53,6 +53,14 @@
 		regulator-boot-on;
         };
 
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -106,6 +114,53 @@
 		clock-frequency = <0>;
 	};
 
+	flash@30000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x30000000 0x4000000>;
+		bank-width = <4>;
+	};
+
+	fpga_flash@38000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x38000000 0x800000>;
+		bank-width = <4>;
+	};
+
+	/*
+	 * The "secure flash" contains things like the boot
+	 * monitor so we don't want people to accidentally
+	 * screw this up. Mark the device tree node disabled
+	 * by default.
+	 */
+	secflash@3c000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x3c000000 0x4000000>;
+		bank-width = <4>;
+		status = "disabled";
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet@3a000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x3a000000 0x10000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb@3b000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x3b000000 0x20000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		port1-otg;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -176,6 +231,41 @@
 				label = "versatile:7";
 				default-state = "off";
 			};
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
 		};
 
 		/* Primary DevChip GIC synthesized with the CPU */
@@ -297,6 +387,53 @@
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
+
+		/* Direct-mapped development chip ROM */
+		pb1176_rom@10200000 {
+			compatible = "direct-mapped";
+			reg = <0x10200000 0x4000>;
+			bank-width = <1>;
+		};
+
+		clcd@10112000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10112000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupt-names = "combined";
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+
+			panel {
+				compatible = "panel-dpi";
+
+				port {
+					clcd_panel: endpoint {
+						remote-endpoint = <&clcd_pads>;
+					};
+				};
+
+				/* Standard 640x480 VGA timings */
+				panel-timing {
+					clock-frequency = <25175000>;
+					hactive = <640>;
+					hback-porch = <48>;
+					hfront-porch = <16>;
+					hsync-len = <96>;
+					vactive = <480>;
+					vback-porch = <33>;
+					vfront-porch = <10>;
+					vsync-len = <2>;
+				};
+			};
+		};
 	};
 
 	/* These peripherals are inside the FPGA rather than the DevChip */
@@ -306,6 +443,27 @@
 		compatible = "simple-bus";
 		ranges;
 
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		fpga_aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
 		fpga_mci: mmcsd@10005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x10005000 0x1000>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
new file mode 100644
index 000000000..3944765ac
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -0,0 +1,682 @@
+/*
+ * Copyright 2015 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	model = "ARM RealView PB11MPcore";
+	compatible = "arm,realview-pb11mp";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb11mp_serial0;
+		serial1 = &pb11mp_serial1;
+		serial2 = &pb11mp_serial2;
+		serial3 = &pb11mp_serial3;
+	};
+
+	memory {
+		/*
+		 * The PB11MPCore has 512 MiB memory @ 0x70000000
+		 * and the first 256 are also remapped @ 0x00000000
+		 */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* Primary TestChip GIC synthesized with the CPU */
+	intc_tc11mp: interrupt-controller@1f000100 {
+		compatible = "arm,tc11mp-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,l220-cache";
+		reg = <0x1f002000 0x1000>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s), probably for safety
+		 * since th outer sync operation can cause the
+		 * cache to hang unless disabled.
+		 */
+		cache-size = <1048576>; // 1MB
+		cache-sets = <4096>;
+		cache-line-size = <32>;
+		arm,shared-override;
+		arm,parity-enable;
+		arm,outer-sync-disable;
+	};
+
+	scu@1f000000 {
+		compatible = "arm,arm11mp-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	timer@1f000600 {
+		compatible = "arm,arm11mp-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1f000620 {
+		compatible = "arm,arm11mp-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	/* PMU with one IRQ line per core */
+	pmu {
+		compatible = "arm,arm11mpcore-pmu";
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+	};
+
+	flash1@44000000 {
+		// 2 * 32MiB NOR Flash memory
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb11mp-soc", "simple-bus";
+		regmap = <&pb11mp_syscon>;
+		ranges;
+
+		pb11mp_syscon: syscon@10000000 {
+			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				linux,default-trigger = "cpu1";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				linux,default-trigger = "cpu2";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				linux,default-trigger = "cpu3";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk5: osc5@d4 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd4>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk6: osc6@d8 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd8>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon 0>,
+					  <&sp810_syscon 1>,
+					  <&sp810_syscon 2>,
+					  <&sp810_syscon 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+					<0 15 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		pb11mp_serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdogclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdogclk", "apb_pclk";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 0>,
+			         <&sp810_syscon 1>,
+				 <&pclk>;
+			clock-names = "timerclk0",
+				    "timerclk1",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 2>,
+			         <&sp810_syscon 3>,
+				 <&pclk>;
+			clock-names = "timerclk2",
+				    "timerclk3",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&pclk>;
+			clock-names = "timer", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&pclk>;
+			clock-names = "timer", "apb_pclk";
+			status = "disabled";
+		};
+
+
+		clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupt-names = "combined";
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+
+			panel {
+				compatible = "panel-dpi";
+
+				port {
+					clcd_panel: endpoint {
+						remote-endpoint = <&clcd_pads>;
+					};
+				};
+
+				/* Standard 640x480 VGA timings */
+				panel-timing {
+					clock-frequency = <25175000>;
+					hactive = <640>;
+					hback-porch = <48>;
+					hfront-porch = <16>;
+					hsync-len = <96>;
+					vactive = <480>;
+					vback-porch = <33>;
+					vfront-porch = <10>;
+					vsync-len = <2>;
+				};
+			};
+		};
+
+		/*
+		 * This GIC on the Platform Baseboard is cascaded off the
+		 * TestChip GIC
+		 */
+		intc_pb11mp: interrupt-controller@1e000000 {
+			compatible = "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1e001000 0x1000>,
+			      <0x1e000000 0x100>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* SMSC 9118 ethernet with PHY and EEPROM */
+		ethernet@4e000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x4e000000 0x10000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&veth>;
+			vddvario-supply = <&veth>;
+		};
+
+		usb@4f000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <0x4f000000 0x20000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			port1-otg;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm-realview-pba8.dts
new file mode 100644
index 000000000..d3238c252
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pba8.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	model = "ARM RealView Platform Baseboard for Cortex-A8";
+	compatible = "arm,realview-pba8";
+	arm,hbi = <0x178>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+		};
+	};
+
+	pmu: pmu@0 {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1e000000 {
+		compatible = "arm,pl390";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000000 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&soc {
+	compatible = "arm,realview-pba8-soc", "simple-bus";
+};
+
+&syscon {
+	compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd";
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
new file mode 100644
index 000000000..90d00b407
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	/*
+	 * This is the RealView Platform Baseboard Explore for Cortex-A9
+	 * (HBI0182 + HBI0183) as described in ARM DUI 0440B
+	 */
+	model = "ARM RealView Platform Baseboard Explore for Cortex-A9";
+	arm,hbi = <0x182>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	L2: l2-cache {
+		compatible = "arm,pl310-cache";
+		reg = <0x1f002000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s).
+		 */
+		cache-size = <131072>; // 128KB
+		cache-sets = <512>;
+		cache-line-size = <32>;
+		arm,parity-disable;
+		arm,tag-latency = <1 1 1>;
+		arm,data-latency = <1 1 1>;
+	};
+
+	scu: scu@1f000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	twd_timer: timer@1f000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	twd_wdog: watchdog@1f000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	pmu: pmu@0 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>, <&CPU1>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1f000000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
new file mode 100644
index 000000000..aeb49c4bd
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -0,0 +1,542 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "arm,realview-pbx";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c;
+	};
+
+	memory {
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: refclk32khz {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x4e000000 0x10000>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		port1-otg;
+	};
+
+	soc: soc@0 {
+		compatible = "arm,realview-pbx-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon0: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon0 0>,
+					  <&sp810_syscon0 1>,
+					  <&sp810_syscon0 2>,
+					  <&sp810_syscon0 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: ssp@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		wdog0: watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdogclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		wdog1: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdogclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&sp810_syscon0 0>,
+			         <&sp810_syscon0 1>,
+				 <&pclk>;
+			clock-names = "timerclk0",
+				    "timerclk1",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&sp810_syscon0 2>,
+			         <&sp810_syscon0 3>,
+				 <&pclk>;
+			clock-names = "timerclk2",
+				    "timerclk3",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		/* DVI serial bus control is at 10016000 */
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk4", "timerclk5", "apb_pclk";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk6", "timerclk7", "apb_pclk";
+		};
+
+		sp810_syscon1: sysctl@1001a000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x1001a000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk4",
+					     "timerclk5",
+					     "timerclk6",
+					     "timerclk7";
+			assigned-clocks = <&sp810_syscon1 0>,
+					  <&sp810_syscon1 1>,
+					  <&sp810_syscon1 2>,
+					  <&sp810_syscon1 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+	};
+
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+	};
+
+	/* These peripherals are inside the NEC ISSP */
+	issp {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+
+			panel {
+				compatible = "panel-dpi";
+
+				port {
+					clcd_panel: endpoint {
+						remote-endpoint = <&clcd_pads>;
+					};
+				};
+
+				/* Standard 640x480 VGA timings */
+				panel-timing {
+					clock-frequency = <25175000>;
+					hactive = <640>;
+					hback-porch = <48>;
+					hfront-porch = <16>;
+					hsync-len = <96>;
+					vactive = <480>;
+					vback-porch = <33>;
+					vfront-porch = <10>;
+					vsync-len = <2>;
+				};
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 03542f7b5..2364fc56a 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -74,7 +74,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
@@ -167,6 +168,33 @@
 					spi-max-frequency = <50000000>;
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x800000>;
+					};
+					partition@800000 {
+						label = "Linux";
+						reg = <0x800000 0x800000>;
+					};
+					partition@1000000 {
+						label = "Filesystem";
+						reg = <0x1000000 0x3f000000>;
+					};
+				};
+			};
 		};
 
 		pcie-controller {
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index af4dc548c..e2a363b1d 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -69,7 +69,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 0f40d5da2..d5e19cd4d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -61,7 +61,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -138,6 +139,10 @@
 				phy-mode = "rgmii-id";
 			};
 
+			crypto@90000 {
+				status = "okay";
+			};
+
 			mvsdio@d4000 {
 				pinctrl-0 = <&sdio_pins3>;
 				pinctrl-names = "default";
@@ -195,7 +200,7 @@
 &pinctrl {
 	pwr_led_pin: pwr-led-pin {
 		marvell,pins = "mpp63";
-		marvell,function = "gpo";
+		marvell,function = "gpio";
 	};
 
 	stat_led_pins: stat-led-pins {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index a31207860..39181b3fa 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -63,7 +63,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -82,6 +83,12 @@
 		};
 
 		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
 			serial@12000 {
 				status = "okay";
 			};
@@ -120,7 +127,7 @@
 				isl12057: isl12057@68 {
 					compatible = "isil,isl12057";
 					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
+					wakeup-source;
 				};
 
 				g762: g762@3e {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 00540f292..11565752b 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -63,7 +63,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -82,6 +83,12 @@
 		};
 
 		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
 			serial@12000 {
 				status = "okay";
 			};
@@ -126,7 +133,7 @@
 				isl12057: isl12057@68 {
 					compatible = "isil,isl12057";
 					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
+					wakeup-source;
 				};
 
 				g762: g762@3e {
@@ -290,7 +297,7 @@
 
 	backup_led_pin: backup-led-pin {
 		marvell,pins = "mpp63";
-		marvell,function = "gpo";
+		marvell,function = "gpio";
 	};
 
 	power_led_pin: power-led-pin {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 19475e68b..fbef730e8 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -74,7 +74,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
new file mode 100644
index 000000000..fef0110a8
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
@@ -0,0 +1,36 @@
+/*
+ * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 2-Bay
+ * Code name (board/PCB)        : Dart 2-Bay
+ * Model name (case sticker)    : SRPD20
+ * Material desc (product spec) : STCTxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+
+/ {
+	model = "Seagate NAS 2-Bay (Dart, SRPD20)";
+	compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  950 2
+			 1400 1
+			 1800 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
new file mode 100644
index 000000000..ae2e1fe50
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -0,0 +1,133 @@
+/*
+ * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 4-Bay
+ * Code name (board/PCB)        : Dart 4-Bay
+ * Model name (case sticker)    : SRPD40
+ * Material desc (product spec) : STCUxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+#include <dt-bindings/leds/leds-ns2.h>
+
+/ {
+	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
+	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		pcie-controller {
+			/* SATA AHCI controller 88SE9170 */
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			mdio {
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				/* I2C GPIO expander (PCA9554A) */
+				pca9554: pca9554@21 {
+					compatible = "nxp,pca9554";
+					reg = <0x21>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+			};
+		};
+	};
+
+	regulators {
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA2 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA3 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		red-sata2 {
+			label = "dart:red:sata2";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+		};
+		red-sata3 {
+			label = "dart:red:sata3";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-ns2 {
+		compatible = "lacie,ns2-leds";
+
+		white-sata2 {
+			label = "dart:white:sata2";
+			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+		white-sata3 {
+			label = "dart:white:sata3";
+			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+	};
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  800 2
+			  1050 1
+			  1300 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
new file mode 100644
index 000000000..3036e25c5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -0,0 +1,231 @@
+/*
+ * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* USB 3.0 bridge ASM1042A */
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+
+				/* RTC - NXP 8563T (second source) */
+				rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+					interrupts = <110>;
+				};
+				/* RTC - MCP7940NT */
+				rtc@6f {
+					compatible = "microchip,mcp7941x";
+					reg = <0x6f>;
+					interrupts = <110>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x300000>;
+				};
+				partition@300000 {
+					label = "device-tree";
+					reg = <0x300000 0x20000>;
+				};
+				partition@320000 {
+					label = "linux";
+					reg = <0x320000 0x2000000>;
+				};
+				partition@2320000 {
+					label = "rootfs";
+					reg = <0x2320000 0xdce0000>;
+				};
+			};
+		};
+
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
+			 &gpio2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Backup button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		white-power {
+			label = "dart:white:power";
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+
+		};
+		red-power {
+			label = "dart:red:power";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		};
+		red-sata0 {
+			label = "dart:red:sata0";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		red-sata1 {
+			label = "dart:red:sata1";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
+	pinctrl-names = "default";
+
+	hdd0_led_sata_pin: hdd0-led-sata-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "sata1";
+	};
+	hdd0_led_gpio_pin: hdd0-led-gpio-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+	hdd1_led_sata_pin: hdd1-led-sata-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+	hdd1_led_gpio_pin: hdd1-led-gpio-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
new file mode 100644
index 000000000..3c91f9821
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
@@ -0,0 +1,51 @@
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB)        : Cumulus Max
+ * Model name (case sticker)    : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+		};
+	};
+
+	regulators {
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
new file mode 100644
index 000000000..aad39e97a
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
@@ -0,0 +1,37 @@
+/*
+ * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud
+ * Code name (board/PCB)        : Cumulus
+ * Model name (case sticker)    : SRN21C
+ * Material desc (product spec) : STCRxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud (Cumulus, SRN21C)";
+	compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
new file mode 100644
index 000000000..1aba08e43
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
+ * (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add support for the white SATA LED.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* USB 3.0 Bridge ASM1042A */
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			coherency-fabric@20200 {
+				broken-idle;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			spi@10600 {
+				status = "okay";
+				pinctrl-0 = <&spi0_pins2>;
+				pinctrl-names = "default";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					/* MX25L8006E */
+					compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <50000000>;
+
+					partition@0 {
+						label = "u-boot";
+						reg = <0x0 0x100000>;
+					};
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+		};
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button@3 {
+			label = "USB VBUS error";
+			linux,code = <KEY_UNKNOWN>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-sata0 {
+			label = "cumulus:red:sata0";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&sata_led_pin>;
+	pinctrl-names = "default";
+
+	sata_led_pin: sata-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "sata0";
+	};
+	gpio_led_pin: gpio-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 4f4924362..8ca7a4340 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -77,7 +77,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		internal-regs {
 
@@ -338,7 +339,7 @@
 
 	fan_ctrl_high_pin: fan-ctrl-high-pin {
 		marvell,pins = "mpp63";
-		marvell,function = "gpo";
+		marvell,function = "gpio";
 	};
 
 	fan_alarm_pin: fan-alarm-pin {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 53a1a5abe..3b06aa835 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -256,6 +256,11 @@
 				reg = <0x20800 0x8>;
 			};
 
+			cpu-config@21000 {
+				compatible = "marvell,armada-370-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
 			audio_controller: audio-controller@30000 {
 				#sound-dai-cells = <1>;
 				compatible = "marvell,armada370-audio";
@@ -319,6 +324,38 @@
 			ethernet@74000 {
 				compatible = "marvell,armada-370-neta";
 			};
+
+			crypto@90000 {
+				compatible = "marvell,armada-370-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>;
+				clocks = <&gateclk 23>;
+				clock-names = "cesa0";
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x7e0>;
+			};
+		};
+
+		crypto_sram: sa-sram {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
+			reg-names = "sram";
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
+
+			/*
+			 * The Armada 370 has an erratum preventing the use of
+			 * the standard workflow for CPU idle support (relying
+			 * on the BootROM code to enter/exit idle state).
+			 * Reserve some amount of the crypto SRAM to put the
+			 * cpuidle workaround.
+			 */
+			idle-sram@0 {
+				reg = <0x0 0x20>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 5711b97e8..cded5f0a2 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -65,7 +65,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			spi@10600 {
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 67a0ab0f7..cc952cf8e 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -176,6 +176,10 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
+				arm,double-linefill-incr = <1>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <1>;
+				prefetch-data = <1>;
 			};
 
 			scu@c000 {
@@ -509,8 +513,23 @@
 				};
 			};
 
+			crypto@90000 {
+				compatible = "marvell,armada-375-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>, <&gateclk 31>,
+					 <&gateclk 28>, <&gateclk 29>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
 			sata@a0000 {
-				compatible = "marvell,orion-sata";
+				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 14>, <&gateclk 20>;
@@ -615,5 +634,23 @@
 			};
 
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 31>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 89f5a9595..2d3fd6e76 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -46,7 +46,7 @@
 
 / {
 	model = "Marvell Armada 385 Access Point Development Board";
-	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial1:115200n8";
@@ -59,7 +59,10 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			spi1: spi@10680 {
@@ -132,18 +135,27 @@
 				};
 			};
 
+			/* CON3 */
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+				bm,pool-short = <3>;
 			};
 
+			/* CON2 */
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
+			/* CON4 */
 			ethernet@70000 {
 				pinctrl-names = "default";
 
@@ -155,6 +167,13 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <3>;
+			};
+
+			bm@c8000 {
+				status = "okay";
 			};
 
 			nfc: flash@d0000 {
@@ -176,6 +195,10 @@
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 74a9c6b54..22f7a13e2 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -57,7 +57,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
 
@@ -115,7 +117,7 @@
 			};
 
 			/* USB part of the eSATA/USB 2.0 port */
-			usb@50000 {
+			usb@58000 {
 				status = "okay";
 			};
 
@@ -243,7 +245,7 @@
 		button@2 {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -258,7 +260,7 @@
 		};
 
 		sata {
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 	};
@@ -311,7 +313,7 @@
 
 &pinctrl {
 	keys_pin: keys-pin {
-		marvell,pins = "mpp24", "mpp47";
+		marvell,pins = "mpp24", "mpp29";
 		marvell,function = "gpio";
 	};
 
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
new file mode 100644
index 000000000..d3e6bd805
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -0,0 +1,446 @@
+/*
+ * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board.  Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	model = "SolidRun Clearfog A1";
+	compatible = "solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	soc {
+		internal-regs {
+			ethernet@30000 {
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <1>;
+				status = "okay";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet@34000 {
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+				bm,pool-short = <1>;
+				status = "okay";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			i2c@11000 {
+				/* Is there anything on this? */
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				/*
+				 * PCA9655 GPIO expander, up to 1MHz clock.
+				 *  0-CON3 CLKREQ#
+				 *  1-CON3 PERST#
+				 *  2-CON2 PERST#
+				 *  3-CON3 W_DISABLE
+				 *  4-CON2 CLKREQ#
+				 *  5-USB3 overcurrent
+				 *  6-USB3 power
+				 *  7-CON2 W_DISABLE
+				 *  8-JP4 P1
+				 *  9-JP4 P4
+				 * 10-JP4 P5
+				 * 11-m.2 DEVSLP
+				 * 12-SFP_LOS
+				 * 13-SFP_TX_FAULT
+				 * 14-SFP_TX_DISABLE
+				 * 15-SFP_MOD_DEF0
+				 */
+				expander0: gpio-expander@20 {
+					/*
+					 * This is how it should be:
+					 * compatible = "onnn,pca9655",
+					 *	 "nxp,pca9555";
+					 * but you can't do this because of
+					 * the way I2C works.
+					 */
+					compatible = "nxp,pca9555";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x20>;
+
+					pcie1_0_clkreq {
+						gpio-hog;
+						gpios = <0 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "pcie1.0-clkreq";
+					};
+					pcie1_0_w_disable {
+						gpio-hog;
+						gpios = <3 GPIO_ACTIVE_LOW>;
+						output-low;
+						line-name = "pcie1.0-w-disable";
+					};
+					pcie2_0_clkreq {
+						gpio-hog;
+						gpios = <4 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "pcie2.0-clkreq";
+					};
+					pcie2_0_w_disable {
+						gpio-hog;
+						gpios = <7 GPIO_ACTIVE_LOW>;
+						output-low;
+						line-name = "pcie2.0-w-disable";
+					};
+					usb3_ilimit {
+						gpio-hog;
+						gpios = <5 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "usb3-current-limit";
+					};
+					usb3_power {
+						gpio-hog;
+						gpios = <6 GPIO_ACTIVE_HIGH>;
+						output-high;
+						line-name = "usb3-power";
+					};
+					m2_devslp {
+						gpio-hog;
+						gpios = <11 GPIO_ACTIVE_HIGH>;
+						output-low;
+						line-name = "m.2 devslp";
+					};
+					sfp_los {
+						/* SFP loss of signal */
+						gpio-hog;
+						gpios = <12 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "sfp-los";
+					};
+					sfp_tx_fault {
+						/* SFP laser fault */
+						gpio-hog;
+						gpios = <13 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "sfp-tx-fault";
+					};
+					sfp_tx_disable {
+						/* SFP transmit disable */
+						gpio-hog;
+						gpios = <14 GPIO_ACTIVE_HIGH>;
+						output-low;
+						line-name = "sfp-tx-disable";
+					};
+					sfp_mod_def0 {
+						/* SFP module present */
+						gpio-hog;
+						gpios = <15 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "sfp-mod-def0";
+					};
+				};
+
+				/* The MCP3021 is 100kHz clock only */
+				mikrobus_adc: mcp3021@4c {
+					compatible = "microchip,mcp3021";
+					reg = <0x4c>;
+				};
+
+				/* Also something at 0x64 */
+			};
+
+			i2c@11100 {
+				/*
+				 * Routed to SFP, mikrobus, and PCIe.
+				 * SFP limits this to 100kHz, and requires
+				 *  an AT24C01A/02/04 with address pins tied
+				 *  low, which takes addresses 0x50 and 0x51.
+				 * Mikrobus doesn't specify beyond an I2C
+				 *  bus being present.
+				 * PCIe uses ARP to assign addresses, or
+				 *  0x63-0x64.
+				 */
+				clock-frequency = <100000>;
+				pinctrl-0 = <&clearfog_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+					marvell,pins = "mpp46";
+					marvell,function = "ref";
+				};
+				clearfog_dsa0_pins: clearfog-dsa0-pins {
+					marvell,pins = "mpp23", "mpp41";
+					marvell,function = "gpio";
+				};
+				clearfog_i2c1_pins: i2c1-pins {
+					/* SFP, PCIe, mSATA, mikrobus */
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+				clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+				clearfog_sdhci_pins: clearfog-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+				clearfog_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp55";
+					marvell,function = "spi1";
+				};
+				mikro_pins: mikro-pins {
+					/* int: mpp22 rst: mpp29 */
+					marvell,pins = "mpp22", "mpp29";
+					marvell,function = "gpio";
+				};
+				mikro_spi_pins: mikro-spi-pins {
+					marvell,pins = "mpp43";
+					marvell,function = "spi1";
+				};
+				mikro_uart_pins: mikro-uart-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "ua1";
+				};
+				rear_button_pins: rear-button-pins {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+			};
+
+			sata@a8000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sata@e0000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&clearfog_sdhci_pins
+					     &clearfog_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			serial@12100 {
+				/* mikrobus uart */
+				pinctrl-0 = <&mikro_uart_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			spi@10680 {
+				/*
+				 * We don't seem to have the W25Q32 on the
+				 * A1 Rev 2.0 boards, so disable SPI.
+				 * CS0: W25Q32 (doesn't appear to be present)
+				 * CS1:
+				 * CS2: mikrobus
+				 */
+				pinctrl-0 = <&spi1_pins
+					     &clearfog_spi1_cs_pins
+					     &mikro_spi_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "w25q32", "jedec,spi-nor";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <3000000>;
+					status = "disabled";
+				};
+			};
+
+			usb@58000 {
+				/* CON3, nearest  power. */
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				/* CON2, nearest CPU, USB2 only. */
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				/* CON7 */
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0. CON3, nearest power. */
+				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 2, Lane 0. CON2, nearest CPU. */
+				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		dsa,ethernet = <&eth1>;
+		dsa,mii-bus = <&mdio>;
+		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+		pinctrl-names = "default";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4 0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+
+			port@6 {
+				/* 88E1512 external phy */
+				reg = <6>;
+				label = "lan6";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button_0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index 91ac8c118..ea93ed727 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -64,7 +64,10 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			spi@10600 {
@@ -97,6 +100,9 @@
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
 			usb@58000 {
@@ -107,6 +113,9 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 			};
 
 			mdio@72004 {
@@ -127,6 +136,10 @@
 				status = "okay";
 			};
 
+			bm@c8000 {
+				status = "okay";
+			};
+
 			flash@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -167,6 +180,10 @@
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 			/*
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index fd4f6fd8a..fd75e5e95 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -44,8 +44,8 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Marvell Armada 385 GP";
-	compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
+	model = "Marvell Armada 388 DB-88F6820-GP";
+	compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,7 +58,10 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			spi@10600 {
@@ -81,10 +84,6 @@
 				pinctrl-0 = <&i2c0_pins>;
 				status = "okay";
 				clock-frequency = <100000>;
-				/*
-				 * The EEPROM located at adresse 54 is needed
-				 * for the boot - DO NOT ERASE IT -
-				 */
 
 				expander0: pca9555@20 {
 					compatible = "nxp,pca9555";
@@ -111,6 +110,10 @@
 					reg = <0x21>;
 				};
 
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
 			};
 
 			serial@12000 {
@@ -131,6 +134,9 @@
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
 			/* CON4 */
@@ -150,6 +156,9 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 			};
 
 
@@ -184,6 +193,10 @@
 				};
 			};
 
+			bm@c8000 {
+				status = "okay";
+			};
+
 			sata@e0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
@@ -205,8 +218,21 @@
 			sdhci@d8000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&sdhci_pins>;
-				cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
 				no-1-8-v;
+				/*
+				 * A388-GP board v1.5 and higher replace
+				 * hitherto card detection method based on GPIO
+				 * with the one using DAT3 pin. As they are
+				 * incompatible, software-based polling is
+				 * enabled with 'broken-cd' property. For boards
+				 * older than v1.5 it can be replaced with:
+				 * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
+				 * whereas for the newer ones following can be
+				 * used instead:
+				 * 'dat3-cd;'
+				 * 'cd-inverted;'
+				 */
+				broken-cd;
 				wp-inverted;
 				bus-width = <8>;
 				status = "okay";
@@ -214,17 +240,21 @@
 
 			/* CON5 */
 			usb3@f0000 {
-				vcc-supply = <&reg_usb2_1_vbus>;
+				usb-phy = <&usb2_1_phy>;
 				status = "okay";
 			};
 
 			/* CON7 */
 			usb3@f8000 {
-				vcc-supply = <&reg_usb3_vbus>;
+				usb-phy = <&usb3_phy>;
 				status = "okay";
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 			/*
@@ -258,13 +288,22 @@
 		};
 	};
 
+	usb2_1_phy: usb2_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb2_1_vbus>;
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_vbus>;
+	};
+
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		regulator-always-on;
 		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -284,26 +323,17 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		regulator-always-on;
-		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usb2_1_vbus: v5-vbus1 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-vbus1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
 		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_sata0: pwr-sata0 {
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
 		enable-active-high;
-		regulator-always-on;
-
+		regulator-boot-on;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_5v_sata0: v5-sata0 {
@@ -311,7 +341,6 @@
 		regulator-name = "v5.0-sata0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata0>;
 	};
 
@@ -320,7 +349,6 @@
 		regulator-name = "v12.0-sata0";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata0>;
 	};
 
@@ -330,7 +358,7 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -339,7 +367,6 @@
 		regulator-name = "v5.0-sata1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata1>;
 	};
 
@@ -348,7 +375,6 @@
 		regulator-name = "v12.0-sata1";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata1>;
 	};
 
@@ -356,7 +382,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata2";
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -365,7 +391,6 @@
 		regulator-name = "v5.0-sata2";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata2>;
 	};
 
@@ -374,7 +399,6 @@
 		regulator-name = "v12.0-sata2";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata2>;
 	};
 
@@ -382,7 +406,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata3";
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -391,7 +415,6 @@
 		regulator-name = "v5.0-sata3";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata3>;
 	};
 
@@ -400,7 +423,6 @@
 		regulator-name = "v12.0-sata3";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata3>;
 	};
 };
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index b657b1687..853f9735c 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -65,7 +65,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			spi@10600 {
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
new file mode 100644
index 000000000..8c9842237
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -0,0 +1,128 @@
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom
+ *
+ *  Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board.  Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy_dedicated>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+				status = "okay";
+			};
+
+			mdio@72004 {
+				/*
+				 * Add the phy clock here, so the phy can be
+				 * accessed to read its IDs prior to binding
+				 * with the driver.
+				 */
+				pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
+				pinctrl-names = "default";
+
+				phy_dedicated: ethernet-phy@0 {
+					/*
+					 * Annoyingly, the marvell phy driver
+					 * configures the LED register, rather
+					 * than preserving reset-loaded setting.
+					 * We undo that rubbish here.
+					 */
+					marvell,reg-init = <3 16 0 0x101e>;
+					reg = <0>;
+				};
+			};
+
+			pinctrl@18000 {
+				microsom_phy_clk_pins: microsom-phy-clk-pins {
+					marvell,pins = "mpp45";
+					marvell,function = "ref";
+				};
+			};
+
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+
+			serial@12000 {
+				pinctrl-0 = <&uart0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 04ecfe6e2..3312be6c8 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -143,6 +143,10 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
+				arm,double-linefill-incr = <1>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <1>;
+				prefetch-data = <1>;
 			};
 
 			scu@c000 {
@@ -425,6 +429,27 @@
 				reg = <0x22000 0x1000>;
 			};
 
+			/*
+			 * As a special exception to the "order by
+			 * register address" rule, the eth0 node is
+			 * placed here to ensure that it gets
+			 * registered as the first interface, since
+			 * the network subsystem doesn't allow naming
+			 * interfaces using DT aliases. Without this,
+			 * the ordering of interfaces is different
+			 * from the one used in U-Boot and the
+			 * labeling of interfaces on the boards, which
+			 * is very confusing for users.
+			 */
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				tx-csum-limit = <9800>;
+				status = "disabled";
+			};
+
 			eth1: ethernet@30000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x30000 0x4000>;
@@ -450,7 +475,7 @@
 			};
 
 			xor@60800 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60a00 0x100>;
 				clocks = <&gateclk 22>;
@@ -470,7 +495,7 @@
 			};
 
 			xor@60900 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
 				clocks = <&gateclk 28>;
@@ -489,14 +514,6 @@
 				};
 			};
 
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts-extended = <&mpic 8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
 			mdio: mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -505,6 +522,21 @@
 				clocks = <&gateclk 4>;
 			};
 
+			crypto@90000 {
+				compatible = "marvell,armada-38x-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 23>, <&gateclk 21>,
+					 <&gateclk 14>, <&gateclk 16>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
 			rtc@a3800 {
 				compatible = "marvell,armada-380-rtc";
 				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
@@ -520,6 +552,14 @@
 				status = "disabled";
 			};
 
+			bm: bm@c8000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc8000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
 			sata@e0000 {
 				compatible = "marvell,armada-380-ahci";
 				reg = <0xe0000 0x2000>;
@@ -580,6 +620,35 @@
 				status = "disabled";
 			};
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
+			clocks = <&gateclk 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
index 094e39c66..6cd18d8aa 100644
--- a/arch/arm/boot/dts/armada-390.dtsi
+++ b/arch/arm/boot/dts/armada-390.dtsi
@@ -47,6 +47,8 @@
 #include "armada-39x.dtsi"
 
 / {
+	compatible = "marvell,armada390";
+
 	soc {
 		internal-regs {
 			pinctrl@18000 {
@@ -54,4 +56,5 @@
 				reg = <0x18000 0x20>;
 			};
 		};
+	};
 };
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index fc9864f85..dc6efd386 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -104,6 +104,10 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
+				arm,double-linefill-incr = <1>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <1>;
+				prefetch-data = <1>;
 			};
 
 			scu@c000 {
@@ -325,7 +329,7 @@
 			};
 
 			xor@60800 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60a00 0x100>;
 				clocks = <&gateclk 22>;
@@ -345,7 +349,7 @@
 			};
 
 			xor@60900 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
 				clocks = <&gateclk 28>;
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 60bbfe32b..5c21b2367 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -69,7 +69,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 7dd900f15..62422a90a 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -75,7 +75,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -179,21 +182,33 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			bm@c0000 {
+				status = "okay";
 			};
 
 			mvsdio@d4000 {
@@ -227,6 +242,38 @@
 					spi-max-frequency = <20000000>;
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x800000>;
+					};
+					partition@800000 {
+						label = "Linux";
+						reg = <0x800000 0x800000>;
+					};
+					partition@1000000 {
+						label = "Filesystem";
+						reg = <0x1000000 0x3f000000>;
+
+					};
+				};
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index bf724ca96..061f42377 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -94,7 +94,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -194,21 +197,29 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
 			};
 
 			/* Front-side USB slot */
@@ -233,6 +244,10 @@
 				};
 			};
 
+			bm@c0000 {
+				status = "okay";
+			};
+
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -241,5 +256,9 @@
 				nand-on-flash-bbt;
 			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 06a6a6c1f..8af463f26 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -64,7 +64,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -149,42 +151,43 @@
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
 
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0xe0000>;
-					read-only;
-				};
-
-				partition@e0000 {
-					label = "u-boot-env";
-					reg = <0xe0000 0x20000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u-boot-env2";
-					reg = <0x100000 0x20000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "zImage";
-					reg = <0x120000 0x400000>;
-				};
-
-				partition@520000 {
-					label = "initrd";
-					reg = <0x520000 0x400000>;
-				};
-
-				partition@xE00000 {
-					label = "boot";
-					reg = <0xE00000 0x3F200000>;
-				};
-
-				partition@flash {
-					label = "flash";
-					reg = <0x0 0x40000000>;
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "u-boot";
+						reg = <0x00000000 0x000e0000>;
+						read-only;
+					};
+
+					partition@e0000 {
+						label = "u-boot-env";
+						reg = <0x000e0000 0x00020000>;
+						read-only;
+					};
+
+					partition@100000 {
+						label = "u-boot-env2";
+						reg = <0x00100000 0x00020000>;
+						read-only;
+					};
+
+					partition@120000 {
+						label = "zImage";
+						reg = <0x00120000 0x00400000>;
+					};
+
+					partition@520000 {
+						label = "initrd";
+						reg = <0x00520000 0x00400000>;
+					};
+
+					partition@e00000 {
+						label = "boot";
+						reg = <0x00e00000 0x3f200000>;
+					};
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index fdd187c55..7a461541c 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -69,7 +69,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -302,13 +304,13 @@
 		button@1 {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 		};
 
 		button@2 {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index f894bc83e..6522b04f4 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -67,7 +67,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 1516fc262..d19f44c70 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -63,7 +63,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -88,41 +90,10 @@
 		};
 
 		internal-regs {
-			/* Two rear eSATA ports */
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
 
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
 			};
 
 			i2c@11000 {
@@ -130,12 +101,6 @@
 				clock-frequency = <400000>;
 				status = "okay";
 
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
-				};
-
 				/* Controller for rear fan #1 of 3 (Protechnic
 				 * MGT4012XB-O20, 8000RPM) near eSATA port */
 				g762_fan1: g762@3e {
@@ -172,6 +137,49 @@
 					compatible = "gmt,g751";
 					reg = <0x4c>;
 				};
+
+				isl12057: isl12057@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Two rear eSATA ports */
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
 
 			nand@d0000 {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 990e8a210..ed3b889d1 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -65,7 +65,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -174,21 +177,29 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
 			};
 			i2c@11000 {
 				status = "okay";
@@ -217,6 +228,14 @@
 			usb@51000 {
 				status = "okay";
 			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 20267ad2f..d17dab0a6 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -77,7 +77,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 3de9b761c..553349c07 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -184,6 +184,11 @@
 				reg = <0x20800 0x20>;
 			};
 
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
 			eth2: ethernet@30000 {
 				compatible = "marvell,armada-xp-neta";
 				reg = <0x30000 0x4000>;
@@ -236,6 +241,26 @@
 				compatible = "marvell,armada-xp-neta";
 			};
 
+			crypto@90000 {
+				compatible = "marvell,armada-xp-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>, <49>;
+				clocks = <&gateclk 23>, <&gateclk 23>;
+				clock-names = "cesa0", "cesa1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			bm: bm@c0000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc0000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
 			xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100
@@ -256,6 +281,35 @@
 				};
 			};
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index b1ad7cf6a..16331aa79 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -1,7 +1,7 @@
 #include "skeleton.dtsi"
 
 / {
-	nvic: nv-interrupt-controller  {
+	nvic: interrupt-controller@e000e100  {
 		compatible = "arm,armv7m-nvic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
new file mode 100644
index 000000000..f823ed382
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -0,0 +1,64 @@
+/*
+ * Axis ARTPEC-6 development board.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "artpec6.dtsi"
+
+/ {
+	model = "ARTPEC-6 development board";
+	compatible = "axis,artpec6-dev-board", "axis,artpec6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		phy1: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
new file mode 100644
index 000000000..3fac4c4d0
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -0,0 +1,211 @@
+/*
+ * Device Tree Source for the Axis ARTPEC-6 SoC
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "axis,artpec6";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&pl310>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&pl310>;
+		};
+	};
+
+	syscon {
+		compatible = "axis,artpec6-syscon", "syscon";
+		reg = <0xf8000000 0x48>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		psci_version = <0x84000000>;
+		cpu_on = <0x84000003>;
+		system_reset = <0x84000009>;
+	};
+
+	scu@faf00000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0xfaf00000 0x58>;
+	};
+
+	/* Main external clock driving CPU and peripherals */
+	ext_clk: ext_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	eth_phy_ref_clk: eth_phy_ref_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
+	clkctrl: clkctrl@0xf8000000 {
+		#clock-cells = <1>;
+		compatible = "axis,artpec6-clkctrl";
+		reg = <0xf8000000 0x48>;
+		clocks = <&ext_clk>;
+		clock-names = "sys_refclk";
+	};
+
+	gtimer@faf00200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xfaf00200 0x20>;
+		interrupts = <GIC_PPI 11 0xf01>;
+		clocks = <&clkctrl 1>;
+	};
+
+	timer@faf00600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xfaf00600 0x20>;
+		interrupts = <GIC_PPI 13 0xf04>;
+		clocks = <&clkctrl 1>;
+		status = "disabled";
+	};
+
+	intc: interrupt-controller@faf01000 {
+		interrupt-controller;
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
+	};
+
+	pl310: cache-controller@faf10000 {
+		compatible = "arm,pl310-cache";
+		cache-unified;
+		cache-level = <2>;
+		reg = <0xfaf10000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+		arm,filter-ranges = <0x0 0x80000000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&intc>;
+	};
+
+	amba@0 {
+		compatible = "simple-bus";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		dma-ranges = <0x80000000 0x00000000 0x40000000>;
+		dma-coherent;
+
+		ethernet: ethernet@f8010000 {
+			clock-names = "phy_ref_clk", "apb_pclk";
+			clocks = <&eth_phy_ref_clk>,
+				<&clkctrl 4>;
+			compatible = "snps,dwc-qos-ethernet-4.10";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xf8010000 0x4000>;
+
+			snps,write-requests = <2>;
+			snps,read-requests = <16>;
+			snps,txpbl = <8>;
+			snps,rxpbl = <2>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@f8036000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8036000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl 13>,
+				<&clkctrl 12>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@f8037000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8037000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl 13>,
+				<&clkctrl 12>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@f8038000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8038000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl 13>,
+				<&clkctrl 12>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+		uart3: serial@f8039000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8039000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl 13>,
+				<&clkctrl 12>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
new file mode 100644
index 000000000..1b7a5ff0e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -0,0 +1,25 @@
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "AST2500 EVB";
+	compatible = "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
new file mode 100644
index 000000000..cc5fcf294
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -0,0 +1,25 @@
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+	model = "Palmetto BMC";
+	compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,38400 earlyprintk";
+	};
+
+	memory {
+		reg = <0x40000000 0x10000000>;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
new file mode 100644
index 000000000..22dee5937
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -0,0 +1,161 @@
+#include "skeleton.dtsi"
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2400";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		clk_clkin: clk_clkin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+		};
+
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xffffffff 0x0007ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clk_hpll: clk_hpll@1e6e2070 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g4-hpll-clock";
+				reg = <0x1e6e2070 0x4>;
+				clocks = <&clk_clkin>;
+			};
+
+			clk_apb: clk_apb@1e6e2008 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g4-apb-clock";
+				reg = <0x1e6e2008 0x4>;
+				clocks = <&clk_hpll>;
+			};
+
+			clk_uart: clk_uart@1e6e2008 {
+				#clock-cells = <0>;
+				compatible = "aspeed,uart-clock";
+				reg = <0x1e6e202c 0x4>;
+			};
+
+			sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x8000>;	// 32K
+			};
+
+			timer: timer@1e782000 {
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				// The moxart_timer driver registers only one
+				// interrupt and assumes it's for timer 1
+				//interrupts = <16 17 18 35 36 37 38 39>;
+				interrupts = <16>;
+				clocks = <&clk_apb>;
+			};
+
+			wdt1: wdt@1e785000 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785000 0x1c>;
+				interrupts = <27>;
+			};
+
+			wdt2: wdt@1e785020 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785020 0x1c>;
+				interrupts = <27>;
+				clocks = <&clk_apb>;
+				status = "disabled";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				current-speed = <38400>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart6: serial@1e787000 {
+				compatible = "ns16550a";
+				reg = <0x1e787000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
new file mode 100644
index 000000000..dd94d9361
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -0,0 +1,170 @@
+#include "skeleton.dtsi"
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2500";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1176jzf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xfefff7ff 0x0807ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clk_clkin: clk_clkin@1e6e2070 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g5-clkin-clock";
+				reg = <0x1e6e2070 0x04>;
+			};
+
+			clk_hpll: clk_hpll@1e6e2024 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g5-hpll-clock";
+				reg = <0x1e6e2024 0x4>;
+				clocks = <&clk_clkin>;
+			};
+
+			clk_ahb: clk_ahb@1e6e2070 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g5-ahb-clock";
+				reg = <0x1e6e2070 0x4>;
+				clocks = <&clk_hpll>;
+			};
+
+			clk_apb: clk_apb@1e6e2008 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g5-apb-clock";
+				reg = <0x1e6e2008 0x4>;
+				clocks = <&clk_hpll>;
+			};
+
+			clk_uart: clk_uart@1e6e2008 {
+				#clock-cells = <0>;
+				compatible = "aspeed,uart-clock";
+				reg = <0x1e6e202c 0x4>;
+			};
+
+			sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x9000>;	// 36K
+			};
+
+			timer: timer@1e782000 {
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				// The moxart_timer driver registers only one
+				// interrupt and assumes it's for timer 1
+				//interrupts = <16 17 18 35 36 37 38 39>;
+				interrupts = <16>;
+				clocks = <&clk_apb>;
+			};
+
+			wdt1: wdt@1e785000 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785000 0x1c>;
+				interrupts = <27>;
+			};
+
+			wdt2: wdt@1e785020 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785020 0x1c>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			wdt3: wdt@1e785040 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785074 0x1c>;
+				status = "disabled";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				current-speed = <38400>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart6: serial@1e787000 {
+				compatible = "ns16550a";
+				reg = <0x1e787000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index e9ced3015..4da011a7a 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -34,15 +34,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -178,7 +169,7 @@
 
 	};
 
-	onewire@0 {
+	onewire {
 		compatible = "w1-gpio";
 		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
index b6ea3f4a7..02d8ef43d 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -26,15 +26,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index f89598af4..50d5e719b 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -23,15 +23,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -128,13 +119,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
 		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
@@ -159,7 +150,7 @@
 			label = "Button";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index bf18ece0c..b4f147c19 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -24,15 +24,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		main_xtal {
 			clock-frequency = <18432000>;
 		};
@@ -63,7 +54,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <1>;
 			status = "okay";
 		};
@@ -94,18 +85,18 @@
 			label = "PB_RST";
 			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		user {
 			label = "PB_USER";
 			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		rtc: pcf8563@51 {
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
index f0b1563cb..50a14568f 100644
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -171,21 +171,21 @@
 			label = "PB_PROG";
 			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		reset {
 			label = "PB_RST";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		user {
 			label = "PB_USER";
 			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
index 9f72b4932..9682d105d 100644
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -98,14 +98,14 @@
 			label = "PB_PROG";
 			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		reset {
 			label = "PB_RST";
 			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index a9aef53ab..8f019184f 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -20,15 +20,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -111,7 +102,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -183,11 +174,11 @@
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
new file mode 100644
index 000000000..171243ca4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -0,0 +1,121 @@
+/*
+ * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
+ *
+ *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Olimex sam9-l9260";
+	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
+				phy-mode = "mii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
+							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+		};
+
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "sam9-l9260:yellow:pwr";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		status_led {
+			label = "sam9-l9260:green:status";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
new file mode 100644
index 000000000..0b9a59d5f
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -0,0 +1,505 @@
+/*
+ * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Atmel SAMA5D2 Xplained";
+	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x80000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@00300000 {
+			atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
+					   &pioA 42 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@00500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			non-removable;
+			mmc-ddr-1_8v;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay"; /* conflict with qspi0 */
+		};
+
+		apb {
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			pdmic@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pdmic_default>;
+				atmel,model = "PDMIC @ sama5d2_xplained";
+				atmel,mic-min-freq = <1000000>;
+				atmel,mic-max-freq = <3246000>;
+				atmel,mic-offset = <0x0>;
+				status = "okay";
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				i2c-sda-hold-time-ns = <350>;
+				status = "okay";
+
+				pmic@5b {
+					compatible = "active-semi,act8945a";
+					reg = <0x5b>;
+					active-semi,vsel-high;
+					active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+					active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+					active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+					active-semi,input-voltage-threshold-microvolt = <6600>;
+					active-semi,precondition-timeout = <40>;
+					active-semi,total-timeout = <3>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+					status = "okay";
+
+					regulators {
+						vdd_1v35_reg: REG_DCDC1 {
+							regulator-name = "VDD_1V35";
+							regulator-min-microvolt = <1350000>;
+							regulator-max-microvolt = <1350000>;
+							regulator-always-on;
+						};
+
+						vdd_1v2_reg: REG_DCDC2 {
+							regulator-name = "VDD_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
+						};
+
+						vdd_3v3_reg: REG_DCDC3 {
+							regulator-name = "VDD_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vdd_fuse_reg: REG_LDO1 {
+							regulator-name = "VDD_FUSE";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+							regulator-always-on;
+						};
+
+						vdd_3v3_lp_reg: REG_LDO2 {
+							regulator-name = "VDD_3V3_LP";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vdd_led_reg: REG_LDO3 {
+							regulator-name = "VDD_LED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vdd_sdhc_1v8_reg: REG_LDO4 {
+							regulator-name = "VDD_SDHC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+				uart5: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&flx0_clk>;
+					clock-names = "usart";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					atmel,fifo-size = <32>;
+					status = "okay";
+				};
+			};
+
+			shdwc@f8048010 {
+				atmel,shdwc-debouncer = <976>;
+
+				input@0 {
+					reg = <0>;
+					atmel,wakeup-type = "low";
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "okay";
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c2: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <0>, <0>;
+					dma-names = "tx", "rx";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&flx4_clk>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					atmel,fifo-size = <16>;
+					status = "okay";
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				status = "okay";
+
+				at24@54 {
+					compatible = "atmel,24c02";
+					reg = <0x54>;
+					pagesize = <16>;
+				};
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vdd_3v3_lp_reg>;
+				vref-supply = <&vdd_3v3_lp_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_adc_default>;
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+				/*
+				 * There is no real pinmux for ADC, if the pin
+				 * is not requested by another peripheral then
+				 * the muxing is done when channel is enabled.
+				 * Requesting pins for ADC is GPIO is
+				 * encouraged to prevent conflicts and to
+				 * disable bias in order to be in the same
+				 * state when the pin is not muxed to the adc.
+				 */
+				pinctrl_adc_default: adc_default {
+					pinmux = <PIN_PD23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_chglev: charger_chglev {
+					pinmux = <PIN_PA12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_irq: charger_irq {
+					pinmux = <PIN_PB13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_lbo: charger_lbo {
+					pinmux = <PIN_PC8__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_default {
+					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+						 <PIN_PD13__FLEXCOM4_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PB9__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB0__GPIO>,
+						 <PIN_PB5__GPIO>,
+						 <PIN_PB6__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_pdmic_default: pdmic_default {
+					pinmux = <PIN_PB26__PDMIC_DAT>,
+						<PIN_PB27__PDMIC_CLK>;
+					bias-disable;
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+					};
+
+					ck_cd_rstn_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-pull-up;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PB11__URXD3>,
+						 <PIN_PB12__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB10__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PA31__GPIO>;
+					bias-disable;
+				};
+
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		bp1 {
+			label = "PB_USER";
+			gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		red {
+			label = "red";
+			gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index d81474e0b..c51fc652f 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -76,7 +76,7 @@
 				pmic: act8865@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
-					status = "okay";
+					status = "disabled";
 
 					regulators {
 						vcc_1v8_reg: DCDC_REG1 {
@@ -297,12 +297,13 @@
 		};
 	};
 
-	vcc_mmc0_reg: fixedregulator@0 {
+	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	gpio_keys {
@@ -315,7 +316,7 @@
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
new file mode 100644
index 000000000..a92c6e0ca
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "sama5d4.dtsi"
+
+/ {
+	model = "DENX MA5D4";
+	compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		clk20m: clk20m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+			clock-output-names = "clk20m";
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					broken-cd;
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
+				status = "okay";
+
+				can0: can@0 {
+					compatible = "microchip,mcp2515";
+					reg = <0>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <6 GPIO_ACTIVE_LOW>;
+					spi-max-frequency = <10000000>;
+				};
+
+				can1: can@1 {
+					compatible = "microchip,mcp2515";
+					reg = <1>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <7 GPIO_ACTIVE_LOW>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: fixedregulator_mmc0 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "RST_n MCI0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
new file mode 100644
index 000000000..eac4ea274
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "at91-sama5d4_ma5d4.dtsi"
+
+/ {
+	model = "DENX MA5D4EVK";
+	compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 14 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			usart0: serial@f802c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f8030000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+			};
+
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		user1 {
+			label = "user1";
+			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user2 {
+			label = "user2";
+			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user3 {
+			label = "user3";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel: panel {
+		/* Actually Ampire 800480R2 */
+		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+		backlight = <&backlight>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_mmc1_reg: fixedregulator_mmc1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 22ad7c959..ed7fce297 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -50,7 +50,6 @@
 	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
-		bootargs = "ignore_loglevel earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -59,15 +58,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -96,10 +86,12 @@
 			macb0: ethernet@f8020000 {
 				phy-mode = "rmii";
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 
 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 					reg = <1>;
 				};
 			};
@@ -131,6 +123,15 @@
 			};
 
 			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
 				atmel,adc-vref = <3300>;
 				status = "okay";
 			};
@@ -153,6 +154,10 @@
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};
@@ -226,7 +231,7 @@
 			label = "pb_user1";
 			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -237,7 +242,7 @@
 		d8 {
 			label = "d8";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
-			status = "disabled";
+			default-state = "on";
 		};
 
 		d10 {
@@ -247,7 +252,7 @@
 		};
 	};
 
-	vcc_3v3_reg: fixedregulator@0 {
+	vcc_3v3_reg: fixedregulator_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 3V3";
 		regulator-min-microvolt = <3300000>;
@@ -256,12 +261,13 @@
 		regulator-always-on;
 	};
 
-	vcc_mmc1_reg: fixedregulator@1 {
+	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
 		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index d782f2926..f8b96cef5 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -50,7 +50,6 @@
 	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
-		bootargs = "ignore_loglevel earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -59,15 +58,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -79,27 +69,16 @@
 
 	ahb {
 		apb {
-			lcd_bus@f0000000 {
-				status = "okay";
-
-				lcd@f0000000 {
-					status = "okay";
-				};
-
-				lcdovl1@f0000140 {
-					status = "okay";
-				};
-
-				lcdovl2@f0000240 {
-					status = "okay";
-				};
-
-				lcdheo1@f0000340 {
-					status = "okay";
-				};
-			};
-
 			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
 				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
 				atmel,adc-vref = <3300>;
 				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
@@ -139,11 +118,37 @@
 					clocks = <&pck2>;
 					clock-names = "mclk";
 				};
+
+				qt1070:keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <25 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+
+				atmel_mxt_ts@4c {
+					compatible = "atmel,atmel_mxt_ts";
+					reg = <0x4c>;
+					interrupt-parent = <&pioE>;
+					interrupts = <24 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mxt_ts>;
+				};
 			};
 
 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@fc000000 {
@@ -175,6 +180,10 @@
 
 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -195,6 +204,14 @@
 						atmel,pins =
 							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
 					};
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mxt_ts: mxt_irq {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};
@@ -268,7 +285,7 @@
 			label = "pb_user1";
 			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
new file mode 100644
index 000000000..e0c0b2897
--- /dev/null
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -0,0 +1,256 @@
+/*
+ * Device Tree file for VInCo platform
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "L+G VInCo platform";
+	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+
+			adc0: adc@fc034000 {
+				status = "okay"; /* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+					     &pinctrl_mmc0_dat1_3
+					     &pinctrl_mmc0_dat4_7>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				vmmc-supply = <&vcc_3v3_reg>;
+				no-1-8-v;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					non-removable;
+					broken-cd;
+					status = "okay";
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				m25p80@0 {
+					compatible = "n25q32b", "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8018000 {
+				status = "okay";
+				/* kerkey security module */
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+					interrupt-parent = <&pioB>;
+					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+				};
+
+			};
+
+			i2c2: i2c@f8024000 {
+				status = "okay";
+
+				rtc1: rtc@64 {
+					compatible = "epson,rx8900";
+					reg = <0x32>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				/* MBUS */
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				/* debug */
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				/* LMN */
+				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			macb1: ethernet@fc028000 {
+				phy-mode = "rmii";
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "disable";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "disable";
+		};
+
+		usb2: ehci@00600000 {
+			/* 4G Modem */
+			status = "okay";
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led_err {
+			label = "err";
+			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_rssi {
+			label = "rssi";
+			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_tls {
+			label = "tls";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_lmc {
+			label = "lmc";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_wmt {
+			label = "wmt";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_pwr {
+			label = "pwr";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index e3cfb9972..4e913c2cc 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -97,7 +97,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -359,6 +359,7 @@
 				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
 				reg = <0xfffffd00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 
 				watchdog {
 					compatible = "atmel,at91rm9200-wdt";
@@ -369,6 +370,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffe00 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				status = "disabled";
 			};
 
@@ -378,8 +380,8 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 					      18 IRQ_TYPE_LEVEL_HIGH 0
 					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			tcb1: timer@fffa4000 {
@@ -388,8 +390,8 @@
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
 					      21 IRQ_TYPE_LEVEL_HIGH 0
 					      22 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			i2c0: i2c@fffb8000 {
@@ -424,7 +426,7 @@
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				clocks = <&ssc0_clk>;
 				clock-names = "pclk";
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc1: ssc@fffd4000 {
@@ -435,7 +437,7 @@
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				clocks = <&ssc1_clk>;
 				clock-names = "pclk";
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc2: ssc@fffd8000 {
@@ -446,7 +448,7 @@
 				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
 				clocks = <&ssc2_clk>;
 				clock-names = "pclk";
-				status = "disable";
+				status = "disabled";
 			};
 
 			macb0: ethernet@fffbc000 {
@@ -946,7 +948,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 8dab4b75c..f90e1c2d3 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 4bc347549..a3e363d79 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -100,7 +100,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9260-pmc";
+				compatible = "atmel,at91sam9260-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -359,11 +359,13 @@
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffd30 {
@@ -379,8 +381,8 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 					      18 IRQ_TYPE_LEVEL_HIGH 0
 					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			tcb1: timer@fffdc000 {
@@ -389,8 +391,8 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
 					      27 IRQ_TYPE_LEVEL_HIGH 0
 					      28 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			pinctrl@fffff400 {
@@ -936,25 +938,21 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "timer-counter-0";
 					trigger-value = <0x1>;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "timer-counter-1";
 					trigger-value = <0x3>;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "timer-counter-2";
 					trigger-value = <0x5>;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "external";
 					trigger-value = <0xd>;
 					trigger-external;
@@ -973,6 +971,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1004,7 +1003,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1014,7 +1013,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
new file mode 100644
index 000000000..2c87f5844
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -0,0 +1,211 @@
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ *  Copyright (C) 2016 Atmel,
+ *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel at91sam9260ek";
+	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		btn3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			gpio-key,wakeup;
+		};
+
+		btn4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index b2c44a07a..32752d788 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -119,8 +119,8 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			usb1: gadget@fffa4000 {
@@ -568,7 +568,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -820,11 +820,13 @@
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			pit: timer@fffffd30 {
@@ -846,6 +848,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				status = "disabled";
 			};
 
@@ -857,7 +860,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_bitbang>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 2e92ac020..55bd51f07 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -22,15 +22,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -149,7 +140,7 @@
 					ti,debounce-tol = /bits/ 16 <65535>;
 					ti,debounce-max = /bits/ 16 <1>;
 
-					linux,wakeup;
+					wakeup-source;
 				};
 			};
 
@@ -193,28 +184,28 @@
 			label = "button_0";
 			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button_1 {
 			label = "button_1";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <257>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button_2 {
 			label = "button_2";
 			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
 			linux,code = <258>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button_3 {
 			label = "button_3";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <259>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index e36d966ef..aeb1a3637 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -93,7 +93,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -377,18 +377,20 @@
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfff7c000 0x100>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb_clk>, <&slow_xtal>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			pinctrl@fffff200 {
@@ -902,6 +904,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1016,7 +1019,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 23381276f..127cc42e9 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -22,15 +22,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <16367660>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -213,18 +204,18 @@
 			label = "left_click";
 			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right_click {
 			label = "right_click";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		24c512@50 {
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
index cfd704461..27de7dc0f 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
index 26b0444b0..d1d2b400f 100644
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -8,9 +8,34 @@
  */
 /dts-v1/;
 #include "at91sam9g15.dtsi"
+#include "at91sam9x5dm.dtsi"
 #include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15-EK";
 	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+			};
+		};
+	};
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 57548a2c5..27847a47c 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -19,15 +19,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -179,13 +170,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		24c512@50 {
@@ -206,14 +197,14 @@
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 707fd4ea5..91a717744 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -26,7 +26,24 @@
 
 			i2c0: i2c@f8010000 {
 				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pck0>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck0>;
+					assigned-clock-rates = <25000000>;
 					status = "okay";
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
 				};
 			};
 
@@ -37,6 +54,15 @@
 
 			isi: isi@f8048000 {
 				status = "okay";
+				port {
+					isi_0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index e35c2fcf8..ff4115886 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
 #include "at91sam9x5_macb0.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
index 641a9bf89..23ec8b13f 100644
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91sam9g35.dtsi"
+#include "at91sam9x5dm.dtsi"
 #include "at91sam9x5ek.dtsi"
 
 / {
@@ -20,6 +21,26 @@
 				phy-mode = "rmii";
 				status = "okay";
 			};
+
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+			};
 		};
 	};
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 18177f5a7..b3501ae2a 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -114,7 +114,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc";
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -387,6 +387,7 @@
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffd30 {
@@ -400,22 +401,23 @@
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9rl-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			tcb0: timer@fff7c000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfff7c000 0x100>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			tcb1: timer@fffd4000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffd4000 0x100>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			dma: dma-controller@ffffec00 {
@@ -498,23 +500,31 @@
 				};
 
 				isi {
-					pinctrl_isi: isi-0 {
-						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
-							      AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* D9 */
-							      AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
-							      AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* D11 */
-							      AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
-							      AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
-							      AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
-							      AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
-							      AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
-							      AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
-							      AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
-							      AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
-							      AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
-							      AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
-							      AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* HSYNC */
-							      AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* MCK */>;
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
 					};
 				};
 
@@ -968,7 +978,7 @@
 
 			trng@fffcc000 {
 				compatible = "atmel,at91sam9g45-trng";
-				reg = <0xfffcc000 0x4000>;
+				reg = <0xfffcc000 0x100>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&trng_clk>;
 			};
@@ -1034,28 +1044,24 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -1067,9 +1073,11 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
 				clocks = <&isi_clk>;
 				clock-names = "isi_clk";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi>;
 				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			pwm0: pwm@fffb8000 {
@@ -1113,6 +1121,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1156,13 +1165,13 @@
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 
-				ep0 {
+				ep@0 {
 					reg = <0>;
 					atmel,fifo-size = <64>;
 					atmel,nb-banks = <1>;
 				};
 
-				ep1 {
+				ep@1 {
 					reg = <1>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1170,7 +1179,7 @@
 					atmel,can-isoc;
 				};
 
-				ep2 {
+				ep@2 {
 					reg = <2>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1178,21 +1187,21 @@
 					atmel,can-isoc;
 				};
 
-				ep3 {
+				ep@3 {
 					reg = <3>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep4 {
+				ep@4 {
 					reg = <4>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep5 {
+				ep@5 {
 					reg = <5>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1200,7 +1209,7 @@
 					atmel,can-isoc;
 				};
 
-				ep6 {
+				ep@6 {
 					reg = <6>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1247,6 +1256,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffdb0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -1306,7 +1316,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 1375d3362..2400c9913 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -24,15 +24,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 		      clock-frequency = <32768>;
 		};
@@ -63,6 +54,25 @@
 
 			i2c0: i2c@fff84000 {
 				status = "okay";
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
 			};
 
 			i2c1: i2c@fff88000 {
@@ -101,6 +111,22 @@
 			};
 
 			pinctrl@fffff200 {
+				camera_sensor {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
@@ -155,6 +181,20 @@
 				status = "okay";
 			};
 
+			isi@fffb4000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				status = "okay";
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
 			pwm0: pwm@fffb8000 {
 				status = "okay";
 
@@ -274,14 +314,14 @@
 			label = "left_click";
 			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right_click {
 			label = "right_click";
 			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 5c2a8c8c8..3b3eb3edc 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -97,7 +97,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9n12-pmc";
+				compatible = "atmel,at91sam9n12-pmc", "syscon";
 				reg = <0xfffffc00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -376,6 +376,7 @@
 			rstc@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffe30 {
@@ -388,6 +389,7 @@
 			shdwc@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			sckc@fffffe50 {
@@ -431,16 +433,44 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9n12-hlcdc";
+				reg = <0xf8038000 0x2000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk", "sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
 			};
 
 			dma: dma-controller@ffffec00 {
@@ -475,6 +505,49 @@
 					};
 				};
 
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
@@ -891,6 +964,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -901,6 +975,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -955,7 +1030,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index eab17fcac..626c67d66 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -23,15 +23,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <16000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -71,10 +62,6 @@
 				};
 			};
 
-			i2c1: i2c@f8014000 {
-				status = "okay";
-			};
-
 			mmc0: mmc@f0008000 {
 				pinctrl-0 = <
 					&pinctrl_board_mmc0
@@ -128,6 +115,22 @@
 				};
 			};
 
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+
 			usb1: gadget@f803c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
@@ -161,6 +164,23 @@
 		};
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -171,13 +191,13 @@
 		};
 
 		d9 {
-			label = "d6";
+			label = "d9";
 			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d10 {
-			label = "d7";
+			label = "d10";
 			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
@@ -190,10 +210,38 @@
 			label = "Enter";
 			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "qiaodian,qd43003c0-40", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
 		};
 	};
 
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "okay";
+	};
+
 	sound {
 		compatible = "atmel,asoc-wm8904";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index c9920c647..70adf940d 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -121,8 +121,8 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			mmc0: mmc@fffa4000 {
@@ -265,25 +265,21 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "timer-counter-0";
 					trigger-value = <0x1>;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "timer-counter-1";
 					trigger-value = <0x3>;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "timer-counter-2";
 					trigger-value = <0x5>;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "external";
 					trigger-value = <0x13>;
 					trigger-external;
@@ -301,13 +297,13 @@
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 
-				ep0 {
+				ep@0 {
 					reg = <0>;
 					atmel,fifo-size = <64>;
 					atmel,nb-banks = <1>;
 				};
 
-				ep1 {
+				ep@1 {
 					reg = <1>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -315,7 +311,7 @@
 					atmel,can-isoc;
 				};
 
-				ep2 {
+				ep@2 {
 					reg = <2>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -323,21 +319,21 @@
 					atmel,can-isoc;
 				};
 
-				ep3 {
+				ep@3 {
 					reg = <3>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep4 {
+				ep@4 {
 					reg = <4>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep5 {
+				ep@5 {
 					reg = <5>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -345,7 +341,7 @@
 					atmel,can-isoc;
 				};
 
-				ep6 {
+				ep@6 {
 					reg = <6>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -814,7 +810,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc";
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -1018,11 +1014,13 @@
 			rstc@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffd30 {
@@ -1036,6 +1034,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -1083,13 +1082,14 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffe00 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
 			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
@@ -1103,7 +1103,7 @@
 		status = "disabled";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
 			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 558c9f220..2e567d90f 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -22,15 +22,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -225,22 +216,22 @@
 			label = "right_click";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left_click {
 			label = "left_click";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index 499cdc81f..d9054e816 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
 #include "at91sam9x5_macb0.dtsi"
 #include "at91sam9x5_can.dtsi"
 
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
index 343d32818..fcb67180e 100644
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
 #include "at91sam9x5ek.dtsi"
 
 / {
@@ -20,6 +21,25 @@
 				phy-mode = "rmii";
 				status = "okay";
 			};
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+			};
 		};
 	};
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index b6c8df8d3..ed4e4bd8a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -68,7 +68,7 @@
 		adc_op_clk: adc_op_clk{
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <5000000>;
+			clock-frequency = <1000000>;
 		};
 	};
 
@@ -105,8 +105,8 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9x5-pmc";
-				reg = <0xfffffc00 0x100>;
+				compatible = "atmel,at91sam9x5-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
 				#address-cells = <1>;
@@ -376,11 +376,13 @@
 			rstc@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffe30 {
@@ -418,16 +420,16 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			dma0: dma-controller@ffffec00 {
@@ -1041,33 +1043,30 @@
 				atmel,adc-channels-used = <0xffff>;
 				atmel,adc-vref = <3300>;
 				atmel,adc-startup-time = <40>;
+				atmel,adc-sample-hold-time = <11>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
 
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
 
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
 
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -1116,13 +1115,13 @@
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 
-				ep0 {
+				ep@0 {
 					reg = <0>;
 					atmel,fifo-size = <64>;
 					atmel,nb-banks = <1>;
 				};
 
-				ep1 {
+				ep@1 {
 					reg = <1>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1130,7 +1129,7 @@
 					atmel,can-isoc;
 				};
 
-				ep2 {
+				ep@2 {
 					reg = <2>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <2>;
@@ -1138,21 +1137,21 @@
 					atmel,can-isoc;
 				};
 
-				ep3 {
+				ep@3 {
 					reg = <3>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep4 {
+				ep@4 {
 					reg = <4>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
 					atmel,can-dma;
 				};
 
-				ep5 {
+				ep@5 {
 					reg = <5>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1160,7 +1159,7 @@
 					atmel,can-isoc;
 				};
 
-				ep6 {
+				ep@6 {
 					reg = <6>;
 					atmel,fifo-size = <1024>;
 					atmel,nb-banks = <3>;
@@ -1173,6 +1172,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1183,6 +1183,7 @@
 				compatible = "atmel,at91sam9x5-rtc";
 				reg = <0xfffffeb0 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -1237,7 +1238,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
@@ -1252,7 +1253,7 @@
 		status = "disabled";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
 			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
@@ -1267,7 +1268,7 @@
 		status = "disabled";
 	};
 
-	i2c@2 {
+	i2c-gpio-2 {
 		compatible = "i2c-gpio";
 		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
index 485302e82..1629db9dd 100644
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -13,6 +13,137 @@
 / {
 	ahb {
 		apb {
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+			};
+
 			pmc: pmc@fffffc00 {
 				periphck {
 					lcdc_clk: lcdc_clk {
@@ -20,6 +151,14 @@
 						reg = <25>;
 					};
 				};
+
+				systemck {
+					lcdck: lcdck {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 26112ebd1..b098ad8cd 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -13,17 +13,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
new file mode 100644
index 000000000..34c089fe0
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -0,0 +1,101 @@
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Free Electrons
+ *
+ *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c0: i2c@f8010000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <7 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "disabled";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "disabled";
+	};
+
+	panel: panel {
+		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index d237c462d..696b8ba06 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -60,16 +60,6 @@
 				status = "okay";
 			};
 
-			isi: isi@f8048000 {
-				status = "disabled";
-				port {
-					isi_0: endpoint@0 {
-						remote-endpoint = <&ov2640_0>;
-						bus-width = <8>;
-					};
-				};
-			};
-
 			i2c0: i2c@f8010000 {
 				status = "okay";
 
@@ -77,27 +67,12 @@
 					compatible = "wm8731";
 					reg = <0x1a>;
 				};
+			};
 
-				ov2640: camera@0x30 {
-					compatible = "ovti,ov2640";
-					reg = <0x30>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pck0>;
-					clock-names = "xvclk";
-					assigned-clocks = <&pck0>;
-					assigned-clock-rates = <25000000>;
-					status = "disabled";
-
-					port {
-						ov2640_0: endpoint {
-							remote-endpoint = <&isi_0>;
-							bus-width = <8>;
-						};
-					};
-				};
+			adc0: adc@f804c000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
 			};
 
 			pinctrl@fffff400 {
diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts
index 49cf59a95..1e9cd1a85 100644
--- a/arch/arm/boot/dts/atlas7-evb.dts
+++ b/arch/arm/boot/dts/atlas7-evb.dts
@@ -10,6 +10,9 @@
 
 /include/ "atlas7.dtsi"
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "CSR SiRFatlas7 Evaluation Board";
 	compatible = "sirf,atlas7-cb", "sirf,atlas7";
@@ -106,5 +109,20 @@
 				};
 			};
 		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rearview_key {
+				label = "rearview key";
+				linux,code = <KEY_CAMERA>;
+				gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>;
+				debounce_interval = <100>;
+			};
+		};
+
 	};
 };
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
index 3e21311f9..83449b33d 100644
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ b/arch/arm/boot/dts/atlas7.dtsi
@@ -21,6 +21,10 @@
 		serial5 = &uart5;
 		serial6 = &uart6;
 		serial9 = &usp2;
+		spi1 = &spi1;
+		spi2 = &usp1;
+		spi3 = &usp2;
+		spi4 = &usp3;
 	};
 	cpus {
 		#address-cells = <1>;
@@ -53,6 +57,11 @@
 		};
 	};
 
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 29 4>, <0 82 4>;
+	};
+
 	noc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1205,7 +1214,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x18641000 0x18641000 0x3000>,
-					 <0x18620000 0x18620000 0x1000>;
+					 <0x18620000 0x18620000 0x1000>,
+					<0x18630000 0x18630000 0x10000>;
 
 			cgum@18641000 {
 				compatible = "sirf,nocfw-cgum";
@@ -1218,6 +1228,15 @@
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 			};
+			pwm: pwm@18630000 {
+				compatible = "sirf,prima2-pwm";
+				#pwm-cells = <2>;
+				reg = <0x18630000 0x10000>;
+				clocks = <&car 138>, <&car 139>, <&car 237>,
+					<&car 240>,  <&car 140>, <&car 246>;
+				clock-names = "pwmc", "sigsrc0", "sigsrc1",
+					"sigsrc2", "sigsrc3", "sigsrc4";
+			};
 		};
 
 		gnssm {
@@ -1231,6 +1250,7 @@
 				<0x18040000 0x18040000 0x1000>,
 				<0x18050000 0x18050000 0x1000>,
 				<0x18060000 0x18060000 0x1000>,
+				<0x180b0000 0x180b0000 0x4000>,
 				<0x18100000 0x18100000 0x3000>,
 				<0x18250000 0x18250000 0x10000>,
 				<0x18200000 0x18200000 0x1000>;
@@ -1314,6 +1334,18 @@
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
+			gmac: eth@180b0000 {
+				compatible = "snps, dwc-eth-qos";
+				reg = <0x180b0000 0x4000>;
+				interrupts = <0 59 0>, <0 70 0>;
+				interrupt-names = "macirq", "macpmt";
+				clocks = <&car 39>, <&car 45>,
+				       <&car 86>, <&car 87>;
+				clock-names = "gnssm_rgmii", "gnssm_gmac",
+					"rgmii", "gmac";
+				local-mac-address = [00 00 00 00 00 00];
+				phy-mode = "rgmii";
+			};
 			dspub@18250000 {
 				compatible = "dx,cc44p";
 				reg = <0x18250000 0x10000>;
@@ -1338,18 +1370,51 @@
 			compatible = "arteris, flexnoc", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x13000000 0x13000000 0x3000>;
+			ranges = <0x13000000 0x13000000 0x3000>,
+				<0x13010000 0x13010000 0x1400>,
+				<0x13010800 0x13010800 0x100>,
+				<0x13011000 0x13011000 0x100>;
 			gpum@0x13000000 {
 				compatible = "sirf,nocfw-gpum";
 				reg = <0x13000000 0x3000>;
 			};
+			dmacsdrr: dma-controller@13010800 {
+				cell-index = <5>;
+				compatible = "sirf,atlas7-dmac-v2";
+				reg = <0x13010800 0x100>;
+				interrupts = <0 8 0>;
+				clocks = <&car 127>;
+				#dma-cells = <1>;
+				#dma-channels = <1>;
+			};
+			dmacsdrw: dma-controller@13011000 {
+				cell-index = <6>;
+				compatible = "sirf,atlas7-dmac-v2";
+				reg = <0x13011000 0x100>;
+				interrupts = <0 9 0>;
+				clocks = <&car 127>;
+				#dma-cells = <1>;
+				#dma-channels = <1>;
+			};
+			sdr@0x13010000 {
+				compatible = "sirf,atlas7-sdr";
+				reg = <0x13010000 0x1400>;
+				interrupts = <0 7 0>,
+					   <0 8 0>,
+					   <0 9 0>;
+				clocks = <&car 127>;
+				dmas = <&dmacsdrr 0>, <&dmacsdrw 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 
 		mediam {
 			compatible = "arteris, flexnoc", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x16000000 0x16000000 0x00200000>,
+			ranges = <0x15000000 0x15000000 0x00600000>,
+				<0x16000000 0x16000000 0x00200000>,
+				<0x17000000 0x17000000 0x10000>,
 				<0x17020000 0x17020000 0x1000>,
 				<0x17030000 0x17030000 0x1000>,
 				<0x17040000 0x17040000 0x1000>,
@@ -1360,6 +1425,13 @@
 				<0x17070200 0x17070200 0x100>,
 				<0x170A0000 0x170A0000 0x3000>;
 
+			multimedia@15000000 {
+				compatible = "sirf,atlas7-video-codec";
+				reg = <0x15000000 0x10000>;
+				interrupts = <0 5 0>;
+				clocks = <&car 102>;
+			};
+
 			mediam@170A0000 {
 				compatible = "sirf,nocfw-mediam";
 				reg = <0x170A0000 0x3000>;
@@ -1386,6 +1458,8 @@
 			nand@17050000 {
 				compatible = "sirf,atlas7-nand";
 				reg = <0x17050000 0x10000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&nd_df_pmx>;
 				interrupts = <0 41 0>;
 				clocks = <&car 108>, <&car 112>;
 				clock-names = "nand_io", "nand_nand";
@@ -1416,6 +1490,14 @@
 				bus-width = <8>;
 			};
 
+			jpeg@17000000 {
+				compatible = "sirf,atlas7-jpeg";
+				reg = <0x17000000 0x10000>;
+				interrupts = <0 72 0>,
+					<0 73 0>;
+				clocks = <&car 103>;
+			};
+
 			usb0: usb@17060000 {
 				cell-index = <0>;
 				compatible = "sirf,atlas7-usb";
@@ -1826,7 +1908,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x13100000 0x13100000 0x20000>,
-				 <0x10e10000 0x10e10000 0x10000>;
+				<0x10e10000 0x10e10000 0x10000>,
+				<0x17010000 0x17010000 0x10000>;
 
 			lcd@13100000 {
 				compatible = "sirf,atlas7-lcdc";
@@ -1848,6 +1931,12 @@
 				clocks = <&car 54>;
 				resets = <&car 29>;
 			};
+			g2d@17010000 {
+				compatible = "sirf, atlas7-g2d";
+				reg = <0x17010000 0x10000>;
+				interrupts = <0 61 0>;
+				clocks = <&car 104>;
+			};
 
 		};
 
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
index ea288f0a1..a9d6d593f 100644
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -107,7 +107,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/axp152.dtsi
new file mode 100644
index 000000000..f90ad6c64
--- /dev/null
+++ b/arch/arm/boot/dts/axp152.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&axp152 {
+	compatible = "x-powers,axp152";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index 24c935c72..afbe89c01 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -87,6 +87,12 @@
 
 		reg_ldo5: ldo5 {
 			regulator-name = "ldo5";
+			status = "disabled";
 		};
 	};
+
+	usb_power_supply: usb_power_supply {
+		compatible = "x-powers,axp202-usb-power-supply";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
new file mode 100644
index 000000000..458b6681e
--- /dev/null
+++ b/arch/arm/boot/dts/axp22x.dtsi
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP221/221s/223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
+ */
+
+&axp22x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dc5ldo: dc5ldo {
+			regulator-name = "dc5ldo";
+		};
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_ldo_io0: ldo_io0 {
+			regulator-name = "ldo_io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo_io1 {
+			regulator-name = "ldo_io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc_ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc_ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb_power_supply {
+		compatible = "x-powers,axp221-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi
new file mode 100644
index 000000000..ab8e5f2d9
--- /dev/null
+++ b/arch/arm/boot/dts/axp809.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP809 Integrated Power Management Chip
+ */
+
+&axp809 {
+	compatible = "x-powers,axp809";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
index 60d8389fd..80b6ba4ca 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -36,56 +36,98 @@ clocks {
 	ranges;
 
 	osc: oscillator {
+		#clock-cells = <0>;
 		compatible = "fixed-clock";
-		#clock-cells = <1>;
 		clock-frequency = <25000000>;
 	};
 
-	apb_clk: apb_clk {
-		compatible = "fixed-clock";
+	/* Cygnus ARM PLL */
+	armpll: armpll {
 		#clock-cells = <0>;
-		clock-frequency = <1000000000>;
+		compatible = "brcm,cygnus-armpll";
+		clocks = <&osc>;
+		reg = <0x19000000 0x1000>;
 	};
 
-	periph_clk: periph_clk {
-		compatible = "fixed-clock";
+	/* peripheral clock for system timer */
+	periph_clk: arm_periph_clk {
 		#clock-cells = <0>;
-		clock-frequency = <500000000>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <2>;
+		clock-mult = <1>;
 	};
 
-	sdio_clk: lcpll_ch2 {
-		compatible = "fixed-clock";
+	/* APB bus clock */
+	apb_clk: apb_clk {
 		#clock-cells = <0>;
-		clock-frequency = <200000000>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <4>;
+		clock-mult = <1>;
 	};
 
-	axi81_clk: axi81_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+	genpll: genpll {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-genpll";
+		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+				     "enet_sw", "audio_125", "can";
 	};
 
-	keypad_clk: keypad_clk {
-		compatible = "fixed-clock";
+	/* always 1/2 of the axi21 clock */
+	axi41_clk: axi41_clk {
 		#clock-cells = <0>;
-		clock-frequency = <31806>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <2>;
+		clock-mult = <1>;
 	};
 
-	adc_clk: adc_clk {
-		compatible = "fixed-clock";
+	/* always 1/4 of the axi21 clock */
+	axi81_clk: axi81_clk {
 		#clock-cells = <0>;
-		clock-frequency = <1562500>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <4>;
+		clock-mult = <1>;
 	};
 
-	pwm_clk: pwm_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1000000>;
+	lcpll0: lcpll0 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-lcpll0";
+		reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio",
+				     "usb_phy", "smart_card", "ch5";
 	};
 
-	lcd_clk: mipipll_ch1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+	mipipll: mipipll {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-mipipll";
+		reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "mipipll", "ch0_unused", "ch1_lcd",
+				     "ch2_v3d", "ch3_unused", "ch4_unused",
+				     "ch5_unused";
+	};
+
+	asiu_clks: asiu_clks {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-asiu-clk";
+		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
+
+		clocks = <&osc>;
+		clock-output-names = "keypad", "adc/touch", "pwm";
+	};
+
+	audiopll: audiopll {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-audiopll";
+		reg = <0x180aeb00 0x68>;
+		clocks = <&osc>;
+		clock-output-names = "audiopll", "ch0_audio",
+					"ch1_audio", "ch2_audio";
 	};
 };
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index e1ac07a16..fabc9f36c 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -32,6 +32,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-cygnus.h>
 
 #include "skeleton.dtsi"
 
@@ -54,197 +55,327 @@
 
 	/include/ "bcm-cygnus-clock.dtsi"
 
-	pinctrl: pinctrl@0x0301d0c8 {
-		compatible = "brcm,cygnus-pinmux";
-		reg = <0x0301d0c8 0x30>,
-		      <0x0301d24c 0x2c>;
-	};
-
-	gpio_crmu: gpio@03024800 {
-		compatible = "brcm,cygnus-crmu-gpio";
-		reg = <0x03024800 0x50>,
-		      <0x03024008 0x18>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	gpio_ccm: gpio@1800a000 {
-		compatible = "brcm,cygnus-ccm-gpio";
-		reg = <0x1800a000 0x50>,
-		      <0x0301d164 0x20>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-	};
+	core {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-	gpio_asiu: gpio@180a5000 {
-		compatible = "brcm,cygnus-asiu-gpio";
-		reg = <0x180a5000 0x668>;
-		#gpio-cells = <2>;
-		gpio-controller;
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+		};
 
-		pinmux = <&pinctrl>;
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
 
-		interrupt-controller;
-		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
-	amba {
+	axi {
+		compatible = "simple-bus";
+		ranges;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus", "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
 
-		wdt@18009000 {
-			 compatible = "arm,sp805" , "arm,primecell";
-			 reg = <0x18009000 0x1000>;
-			 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			 clocks = <&axi81_clk>;
-			 clock-names = "apb_pclk";
+		pcie_phy: phy@0301d0a0 {
+			compatible = "brcm,cygnus-pcie-phy";
+			reg = <0x0301d0a0 0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie0_phy: phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			pcie1_phy: phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
 		};
-	};
 
-	i2c0: i2c@18008000 {
-		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-		reg = <0x18008000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
+		pinctrl: pinctrl@0x0301d0c8 {
+			compatible = "brcm,cygnus-pinmux";
+			reg = <0x0301d0c8 0x30>,
+			      <0x0301d24c 0x2c>;
+		};
 
-	i2c1: i2c@1800b000 {
-		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-		reg = <0x1800b000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
+		gpio_crmu: gpio@03024800 {
+			compatible = "brcm,cygnus-crmu-gpio";
+			reg = <0x03024800 0x50>,
+			      <0x03024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
 
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
+		i2c0: i2c@18008000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x18008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+		wdt0: wdt@18009000 {
+			compatible = "arm,sp805" , "arm,primecell";
+			reg = <0x18009000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+		};
 
-		linux,pci-domain = <0>;
+		gpio_ccm: gpio@1800a000 {
+			compatible = "brcm,cygnus-ccm-gpio";
+			reg = <0x1800a000 0x50>,
+			      <0x0301d164 0x20>;
+			ngpios = <24>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+		};
 
-		bus-range = <0x00 0xff>;
+		i2c1: i2c@1800b000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x1800b000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+		pcie0: pcie@18012000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18012000 0x1000>;
 
-		status = "disabled";
-	};
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
 
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
+			linux,pci-domain = <0>;
 
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+			bus-range = <0x00 0xff>;
 
-		linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
+				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
 
-		bus-range = <0x00 0xff>;
+			phys = <&pcie0_phy>;
+			phy-names = "pcie-phy";
 
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+			status = "disabled";
 
-		status = "disabled";
-	};
+			msi-parent = <&msi0>;
+			msi0: msi@18012000 {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+					     <GIC_SPI 97 IRQ_TYPE_NONE>,
+					     <GIC_SPI 98 IRQ_TYPE_NONE>,
+					     <GIC_SPI 99 IRQ_TYPE_NONE>;
+			};
+		};
 
-	uart0: serial@18020000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18020000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+		pcie1: pcie@18013000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18013000 0x1000>;
 
-	uart1: serial@18021000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18021000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
 
-	uart2: serial@18022000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18020000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			linux,pci-domain = <1>;
 
-	uart3: serial@18023000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18023000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			bus-range = <0x00 0xff>;
 
-	nand: nand@18046000 {
-		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-		reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>;
-		reg-names = "nand", "iproc-idm", "iproc-ext";
-		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
+				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
+			phys = <&pcie1_phy>;
+			phy-names = "pcie-phy";
 
-		brcm,nand-has-wp;
-	};
+			status = "disabled";
 
-	gic: interrupt-controller@19021000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x19021000 0x1000>,
-		      <0x19020100 0x100>;
-	};
+			msi-parent = <&msi1>;
+			msi1: msi@18013000 {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
+					     <GIC_SPI 103 IRQ_TYPE_NONE>,
+					     <GIC_SPI 104 IRQ_TYPE_NONE>,
+					     <GIC_SPI 105 IRQ_TYPE_NONE>;
+			};
+		};
 
-	L2: l2-cache {
-		compatible = "arm,pl310-cache";
-		reg = <0x19022000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
+		uart0: serial@18020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18020000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
 
-	timer@19020200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x19020200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&periph_clk>;
-	};
+		uart1: serial@18021000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18021000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@18022000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18020000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
 
+		uart3: serial@18023000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18023000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		nand: nand@18046000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
+			      <0x18046f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		gpio_asiu: gpio@180a5000 {
+			compatible = "brcm,cygnus-asiu-gpio";
+			reg = <0x180a5000 0x668>;
+			ngpios = <146>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			interrupt-controller;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 42 1>,
+					<&pinctrl 1 44 3>,
+					<&pinctrl 4 48 1>,
+					<&pinctrl 5 50 3>,
+					<&pinctrl 8 126 1>,
+					<&pinctrl 9 155 1>,
+					<&pinctrl 10 152 1>,
+					<&pinctrl 11 154 1>,
+					<&pinctrl 12 153 1>,
+					<&pinctrl 13 127 3>,
+					<&pinctrl 16 140 1>,
+					<&pinctrl 17 145 7>,
+					<&pinctrl 24 130 10>,
+					<&pinctrl 34 141 4>,
+					<&pinctrl 38 54 1>,
+					<&pinctrl 39 56 3>,
+					<&pinctrl 42 60 3>,
+					<&pinctrl 45 64 3>,
+					<&pinctrl 48 68 2>,
+					<&pinctrl 50 84 6>,
+					<&pinctrl 56 94 6>,
+					<&pinctrl 62 72 1>,
+					<&pinctrl 63 70 1>,
+					<&pinctrl 64 80 1>,
+					<&pinctrl 65 74 3>,
+					<&pinctrl 68 78 1>,
+					<&pinctrl 69 82 1>,
+					<&pinctrl 70 156 17>,
+					<&pinctrl 87 104 12>,
+					<&pinctrl 99 102 2>,
+					<&pinctrl 101 90 4>,
+					<&pinctrl 105 116 6>,
+					<&pinctrl 111 100 2>,
+					<&pinctrl 113 122 4>,
+					<&pinctrl 123 11 1>,
+					<&pinctrl 124 38 4>,
+					<&pinctrl 128 43 1>,
+					<&pinctrl 129 47 1>,
+					<&pinctrl 130 49 1>,
+					<&pinctrl 131 53 1>,
+					<&pinctrl 132 55 1>,
+					<&pinctrl 133 59 1>,
+					<&pinctrl 134 63 1>,
+					<&pinctrl 135 67 1>,
+					<&pinctrl 136 71 1>,
+					<&pinctrl 137 73 1>,
+					<&pinctrl 138 77 1>,
+					<&pinctrl 139 79 1>,
+					<&pinctrl 140 81 1>,
+					<&pinctrl 141 83 1>,
+					<&pinctrl 142 10 1>;
+		};
+
+		ts_adc_syscon: ts_adc_syscon@180a6000 {
+			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
+			reg = <0x180a6000 0xc30>;
+		};
+
+		touchscreen: touchscreen@180a6000 {
+			compatible = "brcm,iproc-touchscreen";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		adc: adc@180a6000 {
+			compatible = "brcm,iproc-static-adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			adc-syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
new file mode 100644
index 000000000..c3bf7d23f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -0,0 +1,442 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-nsp.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,nsp";
+	model = "Broadcom Northstar Plus SoC";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			enable-method = "brcm,bcm-nsp-smp";
+			secondary-boot-reg = <0xffff0fec>;
+			reg = <0x1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@00000 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011ba08>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpioa: gpio@0020 {
+			compatible = "brcm,nsp-gpio-a";
+			reg = <0x0020 0x70>,
+			      <0x3f1c4 0x1c>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <32>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+
+		uart0: serial@0300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@0400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		nand: nand@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x026000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+		};
+
+		watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "wdogclk", "apb_pclk";
+		};
+
+		lcpll0: lcpll0@3f100 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-lcpll0";
+			reg = <0x3f100 0x14>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "pcie_phy", "sdio",
+					     "ddr_phy";
+		};
+
+		genpll: genpll@3f140 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-genpll";
+			reg = <0x3f140 0x24>;
+			clocks = <&osc>;
+			clock-output-names = "genpll", "phy", "ethernetclk",
+					     "usbclk", "iprocfast", "sata1",
+					     "sata2";
+		};
+
+		pinctrl: pinctrl@3f1c0 {
+			compatible = "brcm,nsp-pinmux";
+			reg = <0x3f1c0 0x04>,
+			      <0x30028 0x04>,
+			      <0x3f408 0x04>;
+		};
+
+		sata_phy: sata_phy@40100 {
+			compatible = "brcm,iproc-nsp-sata-phy";
+			reg = <0x40100 0x340>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: ahci@41000 {
+			compatible = "brcm,bcm-nsp-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x41000 0x1000>, <0x40020 0x1c>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+				phy-names = "sata-phy";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+				phy-names = "sata-phy";
+			};
+		};
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi@18012000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
+				     <GIC_SPI 128 IRQ_TYPE_NONE>,
+				     <GIC_SPI 129 IRQ_TYPE_NONE>,
+				     <GIC_SPI 130 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi@18013000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
+				     <GIC_SPI 134 IRQ_TYPE_NONE>,
+				     <GIC_SPI 135 IRQ_TYPE_NONE>,
+				     <GIC_SPI 136 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie2: pcie@18014000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18014000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <2>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi2>;
+		msi2: msi@18014000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
+				     <GIC_SPI 140 IRQ_TYPE_NONE>,
+				     <GIC_SPI 141 IRQ_TYPE_NONE>,
+				     <GIC_SPI 142 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 2ddaa5136..18045c38b 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -30,8 +30,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x3500417c>;
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -42,6 +40,8 @@
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x3500417c>;
 			reg = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 2016b72a8..6dde95f21 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -30,8 +30,6 @@
        cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x35004178>;
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -42,6 +40,8 @@
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x35004178>;
 			reg = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts
new file mode 100644
index 000000000..4d525ccb4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm23550-sparrow.dts
@@ -0,0 +1,80 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm23550.dtsi"
+
+/ {
+	model = "BCM23550 Sparrow board";
+	compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550";
+
+	chosen {
+		stdout-path = "/slaves@3e000000/serial@0:115200n8";
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
new file mode 100644
index 000000000..a7a643f38
--- /dev/null
+++ b/arch/arm/boot/dts/bcm23550.dtsi
@@ -0,0 +1,415 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* BCM23550 and BCM21664 have almost identical clocks */
+#include "dt-bindings/clock/bcm21664.h"
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "BCM23550 SoC";
+	compatible = "brcm,bcm23550";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	/* Hub bus */
+	hub@34000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x34000000 0x102f83ac>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		smc@4e000 {
+			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+		};
+
+		resetmgr: reset-controller@1001f00 {
+			compatible = "brcm,bcm21664-resetmgr";
+			reg = <0x01001f00 0x24>;
+		};
+
+		gpio: gpio@1003000 {
+			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+			reg = <0x01003000 0x524>;
+			interrupts =
+			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+		};
+
+		timer@1006000 {
+			compatible = "brcm,kona-timer";
+			reg = <0x01006000 0x1c>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+		};
+	};
+
+	/* Slaves bus */
+	slaves@3e000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e000000 0x0001c070>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uartb: serial@0 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00000000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uartb2: serial@1000 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00001000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uartb3: serial@2000 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00002000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		bsc1: i2c@16000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00016000 0x70>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+			status = "disabled";
+		};
+
+		bsc2: i2c@17000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00017000 0x70>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+			status = "disabled";
+		};
+
+		bsc3: i2c@18000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00018000 0x70>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+			status = "disabled";
+		};
+
+		bsc4: i2c@1c000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x0001c000 0x70>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+			status = "disabled";
+		};
+	};
+
+	/* Apps bus */
+	apps@3e300000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e300000 0x01b77000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usbotg: usb@e20000 {
+			compatible = "snps,dwc2";
+			reg = <0x00e20000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_otg_ahb_clk>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e30000 {
+			compatible = "brcm,kona-usb2-phy";
+			reg = <0x00e30000 0x28>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@e80000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e80000 0x801c>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+			status = "disabled";
+		};
+
+		sdio2: sdio@e90000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e90000 0x801c>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+			status = "disabled";
+		};
+
+		sdio3: sdio@ea0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00ea0000 0x801c>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+			status = "disabled";
+		};
+
+		sdio4: sdio@eb0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00eb0000 0x801c>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+			status = "disabled";
+		};
+
+		cdc: cdc@1b0e000 {
+			compatible = "brcm,bcm23550-cdc";
+			reg = <0x01b0e000 0x78>;
+		};
+
+		gic: interrupt-controller@1b21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01b21000 0x1000>,
+			      <0x01b22000 0x1000>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+
+		master_ccu: master_ccu {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
new file mode 100644
index 000000000..35ff4e7a4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model A+";
+
+	leds {
+		act {
+			gpios = <&gpio 47 0>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 0>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
new file mode 100644
index 000000000..306a84ee9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -0,0 +1,28 @@
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a", "brcm,bcm2835";
+	model = "Raspberry Pi Model A";
+
+	leds {
+		act {
+			gpios = <&gpio 16 1>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 668442b1b..d5fdb8e76 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -1,5 +1,7 @@
 /dts-v1/;
+#include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
@@ -28,3 +30,7 @@
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
 };
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
new file mode 100644
index 000000000..bfc4bd9b7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -0,0 +1,29 @@
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+	model = "Raspberry Pi Model B rev2";
+
+	leds {
+		act {
+			gpios = <&gpio 16 1>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index ee89b7942..0371bb737 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -1,5 +1,7 @@
 /dts-v1/;
+#include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
@@ -13,11 +15,9 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+	pinctrl-0 = <&gpioout &alt0 &alt3>;
+};
 
-	/* I2S interface */
-	i2s_alt2: i2s_alt2 {
-		brcm,pins = <28 29 30 31>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 46780bb48..e9b47b2bb 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,7 +1,8 @@
-#include "bcm2835.dtsi"
+#include <dt-bindings/power/raspberrypi-power.h>
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
 
@@ -14,6 +15,19 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware";
+			mboxes = <&mailbox>;
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+	};
 };
 
 &gpio {
@@ -45,7 +59,28 @@
 	clock-frequency = <100000>;
 };
 
+&i2c2 {
+	status = "okay";
+};
+
 &sdhci {
 	status = "okay";
 	bus-width = <4>;
 };
+
+&pwm {
+	status = "okay";
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&hdmi {
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 301c73f4c..a78759e73 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,192 +1,25 @@
-#include <dt-bindings/pinctrl/bcm2835.h>
-#include "skeleton.dtsi"
+#include "bcm283x.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
-	model = "BCM2835";
-	interrupt-parent = <&intc>;
 
-	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s";
+			reg = <0x0>;
+		};
 	};
 
 	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
 		ranges = <0x7e000000 0x20000000 0x02000000>;
 		dma-ranges = <0x40000000 0x00000000 0x20000000>;
 
-		timer@7e003000 {
-			compatible = "brcm,bcm2835-system-timer";
-			reg = <0x7e003000 0x1000>;
-			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-			clock-frequency = <1000000>;
-		};
-
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xf00>;
-			interrupts = <1 16>,
-				     <1 17>,
-				     <1 18>,
-				     <1 19>,
-				     <1 20>,
-				     <1 21>,
-				     <1 22>,
-				     <1 23>,
-				     <1 24>,
-				     <1 25>,
-				     <1 26>,
-				     <1 27>,
-				     <1 28>;
-
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x7f35>;
-		};
-
-		intc: interrupt-controller@7e00b200 {
-			compatible = "brcm,bcm2835-armctrl-ic";
-			reg = <0x7e00b200 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm-wdt";
-			reg = <0x7e100000 0x28>;
-		};
-
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-		};
-
-		mailbox: mailbox@7e00b800 {
-			compatible = "brcm,bcm2835-mbox";
-			reg = <0x7e00b880 0x40>;
-			interrupts = <0 1>;
-			#mbox-cells = <0>;
-		};
-
-		gpio: gpio@7e200000 {
-			compatible = "brcm,bcm2835-gpio";
-			reg = <0x7e200000 0xb4>;
-			/*
-			 * The GPIO IP block is designed for 3 banks of GPIOs.
-			 * Each bank has a GPIO interrupt for itself.
-			 * There is an overall "any bank" interrupt.
-			 * In order, these are GIC interrupts 17, 18, 19, 20.
-			 * Since the BCM2835 only has 2 banks, the 2nd bank
-			 * interrupt output appears to be mirrored onto the
-			 * 3rd bank's interrupt signal.
-			 * So, a bank0 interrupt shows up on 17, 20, and
-			 * a bank1 interrupt shows up on 18, 19, 20!
-			 */
-			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart@7e201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
-			interrupts = <2 25>;
-			clock-frequency = <3000000>;
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		i2s: i2s@7e203000 {
-			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x20>,
-			      <0x7e101098 0x02>;
-
-			dmas = <&dma 2>,
-			       <&dma 3>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		spi: spi@7e204000 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x1000>;
-			interrupts = <2 22>;
-			clocks = <&clk_spi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@7e205000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sdhci: sdhci@7e300000 {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clk_mmc>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@7e804000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e804000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb@7e980000 {
-			compatible = "brcm,bcm2835-usb";
-			reg = <0x7e980000 0x10000>;
-			interrupts = <1 9>;
-		};
-
 		arm-pmu {
 			compatible = "arm,arm1176-pmu";
 		};
 	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk_mmc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc";
-			clock-frequency = <100000000>;
-		};
-
-		clk_i2c: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-output-names = "i2c";
-			clock-frequency = <250000000>;
-		};
-
-		clk_spi: clock@2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			#clock-cells = <0>;
-			clock-output-names = "spi";
-			clock-frequency = <250000000>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
new file mode 100644
index 000000000..29e1cfe8e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -0,0 +1,40 @@
+/dts-v1/;
+#include "bcm2836.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+	model = "Raspberry Pi 2 Model B";
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 47 0>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 0>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
new file mode 100644
index 000000000..9d0651d8f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -0,0 +1,78 @@
+#include "bcm283x.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&local_intc>;
+		};
+
+		arm-pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupt-parent = <&local_intc>;
+			interrupts = <9>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0>, // PHYS_SECURE_PPI
+			     <1>, // PHYS_NONSECURE_PPI
+			     <3>, // VIRT_PPI
+			     <2>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8>;
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
new file mode 100644
index 000000000..12c981e51
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9512";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
new file mode 100644
index 000000000..3f0a56ebc
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
new file mode 100644
index 000000000..445624a1a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -0,0 +1,321 @@
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
+ * bcm2835.dtsi and bcm2836.dtsi.
+ */
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "earlyprintk console=ttyAMA0";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     /* dma channel 11-14 share one irq */
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     /* unused shared irq for all channels */
+				     <1 28>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10",
+					  "dma11",
+					  "dma12",
+					  "dma13",
+					  "dma14",
+					  "dma-shared-all";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm-wdt";
+			reg = <0x7e100000 0x28>;
+		};
+
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives everything from the platform's
+			 * oscillator.
+			 */
+			clocks = <&clk_osc>;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+		};
+
+		mailbox: mailbox@7e00b800 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0: serial@7e201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x20>,
+			      <0x7e101098 0x02>;
+
+			dmas = <&dma 2>,
+			       <&dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x1000>;
+			interrupts = <2 22>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e206000 {
+			compatible = "brcm,bcm2835-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <2 13>; /* pwa0 */
+		};
+
+		pixelvalve@7e207000 {
+			compatible = "brcm,bcm2835-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <2 14>; /* pwa1 */
+		};
+
+		aux: aux@0x7e215000 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+		};
+
+		uart1: serial@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+			status = "disabled";
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150c0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150c0 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		sdhci: sdhci@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			status = "disabled";
+		};
+
+		hvs@7e400000 {
+			compatible = "brcm,bcm2835-hvs";
+			reg = <0x7e400000 0x6000>;
+			interrupts = <2 1>;
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e807000 {
+			compatible = "brcm,bcm2835-pixelvalve2";
+			reg = <0x7e807000 0x100>;
+			interrupts = <2 10>; /* pixelvalve */
+		};
+
+		hdmi: hdmi@7e902000 {
+			compatible = "brcm,bcm2835-hdmi";
+			reg = <0x7e902000 0x600>,
+			      <0x7e808000 0x100>;
+			interrupts = <2 8>, <2 9>;
+			ddc = <&i2c2>;
+			clocks = <&clocks BCM2835_PLLH_PIX>,
+				 <&clocks BCM2835_CLOCK_HSM>;
+			clock-names = "pixel", "hdmi";
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+		};
+
+		vc4: gpu {
+			compatible = "brcm,bcm2835-vc4";
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 24f0ab59b..9cb186ea2 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -17,7 +17,7 @@
 	model = "Buffalo WZR-1750DHP (BCM4708)";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
 	memory {
@@ -135,3 +135,19 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index f03939311..1c7e53d60 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -17,7 +17,7 @@
 	model = "Luxul XWC-1000 (BCM4708)";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
 	memory {
@@ -55,3 +55,11 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 326ce8f4e..8ce39d58e 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -17,23 +17,13 @@
 	model = "Netgear R6250 V1 (BCM4708)";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
 	memory {
 		reg = <0x00000000 0x08000000>;
 	};
 
-	chipcommonA {
-		uart0: serial@0300 {
-			status = "okay";
-		};
-
-		uart1: serial@0400 {
-			status = "okay";
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -92,3 +82,15 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 3a94606d0..6229ef283 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -82,3 +82,7 @@
 		};
 	};
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index d6a033b97..70f4bb9d8 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -17,7 +17,7 @@
 	model = "SmartRG SR400ac";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
 	memory {
@@ -118,3 +118,51 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
index 31141e83f..eed4dd159 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -15,6 +15,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "brcm,bcm-nsp-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -27,6 +28,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
+			secondary-boot-reg = <0xffff0400>;
 			reg = <0x1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index bb0cb0bfa..a9c8defed 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -17,7 +17,7 @@
 	model = "Buffalo WZR-600DHP2 (BCM47081)";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
 	memory {
@@ -122,3 +122,7 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index aedf3c426..8ade7def2 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index 2a92e8d5a..0653e7ef2 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -126,3 +126,12 @@
 		};
 	};
 };
+
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
new file mode 100644
index 000000000..a22ed1440
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -0,0 +1,106 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R7000";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 446c586cd..ca181516c 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -50,6 +50,36 @@
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
+
+		wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
 	};
 
 	gpio-keys {
@@ -76,3 +106,11 @@
 		};
 	};
 };
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
new file mode 100644
index 000000000..c8c0b3616
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -0,0 +1,119 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-885L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nand: nand@18028000 {
+		nandcs@0 {
+			partition@0 {
+				label = "firmware";
+				reg = <0x00000000 0x08000000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: router / extender */
+		extender {
+			label = "Extender";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	clock-frequency = <125000000>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
new file mode 100644
index 000000000..24b099c00
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
@@ -0,0 +1,15 @@
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <1>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
index d10781e36..9a9630ded 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
@@ -9,16 +9,10 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
-/ {
-	nand@18028000 {
-		nandcs@0 {
-			compatible = "brcm,nandcs";
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+#include "bcm5301x-nand-cs0.dtsi"
 
-			nand-ecc-strength = <8>;
-			nand-ecc-step-size = <512>;
-		};
-	};
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
 };
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
new file mode 100644
index 000000000..168495106
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/ {
+	nand@18028000 {
+		nandcs: nandcs@0 {
+			compatible = "brcm,nandcs";
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 21fefd4cd..8af47913b 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -8,6 +8,7 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <dt-bindings/clock/bcm-nsp.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +18,10 @@
 / {
 	interrupt-parent = <&gic>;
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	chipcommonA {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x00001000>;
@@ -27,7 +32,7 @@
 			compatible = "ns16550";
 			reg = <0x0300 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
+			clocks = <&iprocslow>;
 			status = "disabled";
 		};
 
@@ -35,63 +40,103 @@
 			compatible = "ns16550";
 			reg = <0x0400 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
+			clocks = <&iprocslow>;
 			status = "disabled";
 		};
 	};
 
 	mpcore {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x19020000 0x00003000>;
+		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		scu@0000 {
+		a9pll: arm_clk@00000 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		scu@20000 {
 			compatible = "arm,cortex-a9-scu";
-			reg = <0x0000 0x100>;
+			reg = <0x20000 0x100>;
 		};
 
-		timer@0200 {
+		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x0200 0x100>;
+			reg = <0x20200 0x100>;
 			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
+			clocks = <&periph_clk>;
 		};
 
-		local-timer@0600 {
+		local-timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x0600 0x100>;
+			reg = <0x20600 0x100>;
 			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
+			clocks = <&periph_clk>;
 		};
 
-		gic: interrupt-controller@1000 {
+		gic: interrupt-controller@21000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			interrupt-controller;
-			reg = <0x1000 0x1000>,
-			      <0x0100 0x100>;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
 		};
 
-		L2: cache-controller@2000 {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
-			reg = <0x2000 0x1000>;
+			reg = <0x22000 0x1000>;
 			cache-unified;
+			arm,shared-override;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
 			cache-level = <2>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts =
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	clocks {
 		#address-cells = <1>;
-		#size-cells = <0>;
+		#size-cells = <1>;
+		ranges;
 
-		/* As long as we do not have a real clock driver us this
-		 * fixed clock */
-		clk_periph: periph {
+		osc: oscillator {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
 			#clock-cells = <0>;
-			clock-frequency = <400000000>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
 		};
 	};
 
@@ -108,6 +153,21 @@
 			/* ChipCommon */
 			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
 			/* PCIe Controller 0 */
 			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
 			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
@@ -166,6 +226,85 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		usb2: usb2@21000 {
+			reg = <0x00021000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		usb3: usb3@23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		spi@29000 {
+			reg = <0x00029000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			spi_nor: spi-nor@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				linux,part-probe = "ofpart", "bcm47xxpart";
+				status = "disabled";
+			};
+		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
+	};
+
+	lcpll0: lcpll0@1800c100 {
+		#clock-cells = <1>;
+		compatible = "brcm,nsp-lcpll0";
+		reg = <0x1800c100 0x14>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll0", "pcie_phy", "sdio",
+				     "ddr_phy";
+	};
+
+	genpll: genpll@1800c140 {
+		#clock-cells = <1>;
+		compatible = "brcm,nsp-genpll";
+		reg = <0x1800c140 0x24>;
+		clocks = <&osc>;
+		clock-output-names = "genpll", "phy", "ethernetclk",
+				     "usbclk", "iprocfast", "sata1",
+				     "sata2";
+	};
+
+	srab: srab@18007000 {
+		compatible = "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+
+		/* ports are defined in board DTS */
+	};
+
+	rng: rng@18004000 {
+		compatible = "brcm,bcm5301x-rng";
+		reg = <0x18004000 0x14>;
 	};
 
 	nand: nand@18028000 {
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 34cd64051..d0560e8cd 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -43,18 +43,31 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		arm_timer_clk: arm_timer_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <500000000>;
-		};
-
+		/* UBUS peripheral clock */
 		periph_clk: periph_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 			clock-output-names = "periph";
 		};
+
+		/* peripheral clock for system timer */
+		axi_clk: axi_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* APB bus clock */
+		apb_clk: apb_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
 	};
 
 	/* ARM bus */
@@ -93,14 +106,14 @@
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x1e200 0x20>;
 			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&arm_timer_clk>;
+			clocks = <&axi_clk>;
 		};
 
 		local_timer: local-timer@1e600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x1e600 0x20>;
 			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&arm_timer_clk>;
+			clocks = <&axi_clk>;
 		};
 
 		twd_watchdog: watchdog@1e620 {
@@ -109,6 +122,13 @@
 			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		armpll: armpll {
+			#clock-cells = <0>;
+			compatible = "brcm,bcm63138-armpll";
+			clocks = <&periph_clk>;
+			reg = <0x20000 0xf00>;
+		};
+
 		pmb0: reset-controller@4800c0 {
 			compatible = "brcm,bcm63138-pmb";
 			reg = <0x4800c0 0x10>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58dcd6662..479132196 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -109,6 +109,20 @@
 			brcm,int-fwd-mask = <0x70000>;
 		};
 
+		irq0_aon_intc: interrupt-controller@417280 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x417280 0x8>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0x46 0x0>,
+				     <GIC_SPI 0x44 0x0>,
+				     <GIC_SPI 0x49 0x0>;
+			brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
+			brcm,int-fwd-mask = <0x0>;
+			brcm,irq-can-wake;
+		};
+
 		hif_intr2_intc: interrupt-controller@3e1000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x3e1000 0x30>;
@@ -119,6 +133,22 @@
 			interrupt-names = "hif";
 		};
 
+                aon_pm_l2_intc: interrupt-controller@410640 {
+			compatible = "brcm,l2-intc";
+			reg = <0x410640 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x40 0x0>;
+			interrupt-parent = <&gic>;
+			brcm,irq-can-wake;
+		};
+
+		aon-ctrl@410000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x410000 0x200>, <0x410200 0x400>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
 		nand: nand@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
@@ -167,6 +197,110 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		upg_gio: gpio@40a700 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x40a700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 24>;
+		};
+
+		upg_gio_aon: gpio@4172c0 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x4172c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts-extended = <&irq0_aon_intc 0x6>,
+					      <&aon_pm_l2_intc 0x5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0xf1100000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+				};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@1 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@2 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+	};
+
+	sram@ffe00000 {
+		compatible = "brcm,boot-sram", "mmio-sram";
+		reg = <0x0 0xffe00000 0x0 0x10000>;
 	};
 
 	smpboot {
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 7db484323..8b3800f46 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -39,19 +39,11 @@
 	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
 	compatible = "brcm,bcm11360", "brcm,cygnus";
 
-	aliases {
-		serial0 = &uart3;
-	};
-
 	chosen {
 		stdout-path = &uart3;
 		bootargs = "console=ttyS0,115200";
 	};
 
-	uart3: serial@18023000 {
-		status = "okay";
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -64,3 +56,23 @@
 		};
 	};
 };
+
+&uart3 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts
index 9658d4f62..091c73a46 100644
--- a/arch/arm/boot/dts/bcm911360k.dts
+++ b/arch/arm/boot/dts/bcm911360k.dts
@@ -43,11 +43,10 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	uart3: serial@18023000 {
-		status = "okay";
-	};
+&uart3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
new file mode 100644
index 000000000..251a486f2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -0,0 +1,56 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94708)";
+	compatible = "brcm,bcm94708", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
new file mode 100644
index 000000000..b16cac929
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -0,0 +1,56 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94709)";
+	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
new file mode 100644
index 000000000..0a9abecf9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -0,0 +1,104 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	model = "NorthStar Enterprise Router (BCM953012ER)";
+	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "port0";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "port1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
new file mode 100644
index 000000000..05a985a20
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -0,0 +1,63 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM953012K)";
+	compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&uart0 {
+	clock-frequency = <62499840>;
+	status = "okay";
+};
+
+&uart1 {
+	clock-frequency = <62499840>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index 2f63052f9..b4a1392bd 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
 
 / {
 	model = "Cygnus SVK (BCM958300K)";
@@ -43,35 +44,34 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	pcie0: pcie@18012000 {
-		status = "okay";
-	};
+&pcie0 {
+	status = "okay";
+};
 
-	pcie1: pcie@18013000 {
-		status = "okay";
-	};
+&pcie1 {
+	status = "okay";
+};
 
-	uart3: serial@18023000 {
-		status = "okay";
-	};
+&uart3 {
+	status = "okay";
+};
 
-	nand: nand@18046000 {
-		nandcs@1 {
-			compatible = "brcm,nandcs";
-			reg = <0>;
-			nand-on-flash-bbt;
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-			nand-ecc-strength = <24>;
-			nand-ecc-step-size = <1024>;
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
 
-			brcm,nand-oob-sector-size = <27>;
-		};
+		brcm,nand-oob-sector-size = <27>;
 	};
 };
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
index 56b429abb..337868332 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
 
 / {
 	model = "Cygnus Wireless Audio (BCM958305K)";
@@ -43,11 +44,42 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
 
-	uart3: serial@18023000 {
-		status = "okay";
+		brcm,nand-oob-sector-size = <27>;
 	};
 };
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
new file mode 100644
index 000000000..d257e83de
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -0,0 +1,109 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+	model = "NorthStar Plus XMC (BCM958525xmc)";
+	compatible = "brcm,bcm58525", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+/* XHCI, SATA, MMC, and Ethernet support needed to be complete */
+
+&uart0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
new file mode 100644
index 000000000..652418aa2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -0,0 +1,112 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625HR)";
+	compatible = "brcm,bcm58625", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
new file mode 100644
index 000000000..2d8422632
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -0,0 +1,128 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625K)";
+	compatible = "brcm,bcm58625", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@1 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@2 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@3 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/bcm9hmidc.dtsi
new file mode 100644
index 000000000..65397c088
--- /dev/null
+++ b/arch/arm/boot/dts/bcm9hmidc.dtsi
@@ -0,0 +1,42 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Broadcom human machine interface daughter card (bcm9hmidc) installed on
+ * bcm958300k/bcm958305k boards
+ */
+
+&touchscreen {
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index 5c99fb3a4..3c0907b87 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -45,7 +45,8 @@
 	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index ef811de09..ae8100974 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -47,6 +47,12 @@
 	model = "Marvell Armada 1500 (BG2) SoC";
 	compatible = "marvell,berlin2", "marvell,berlin";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -57,6 +63,16 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
 		cpu@1 {
@@ -404,6 +420,13 @@
 			};
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -412,6 +435,29 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
 			sm_gpio1: gpio@5000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x5000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 772165ad0..8ba8b50ce 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -46,7 +46,8 @@
 	compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 900213d78..6d06b6118 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -47,6 +47,11 @@
 	model = "Marvell Armada 1500-mini (BG2CD) SoC";
 	compatible = "marvell,berlin2cd", "marvell,berlin";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -56,6 +61,14 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				800000  1200000
+				600000  1200000
+			>;
 		};
 	};
 
@@ -368,6 +381,13 @@
 			status = "disabled";
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -376,6 +396,29 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
 			sm_gpio1: gpio@5000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x5000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 4a749e5b3..33b28757b 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -49,7 +49,8 @@
 	};
 
 	choosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	regulators {
@@ -83,17 +84,49 @@
 			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
+
+		reg_sdio1_vmmc: regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vmmc";
+			enable-active-high;
+			regulator-boot-on;
+			gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_sdio1_vqmmc: regulator@4 {
+			compatible = "regulator-gpio";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vqmmc";
+			regulator-type = "voltage";
+			enable-active-high;
+			gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
+			states = <3300000 0x1
+				  1800000 0x0>;
+		};
+	};
+};
+
+&soc_pinctrl {
+	sd1gpio_pmux: sd1pwr-pmux {
+		groups = "G23", "G32";
+		function = "gpio";
 	};
 };
 
 &sdhci1 {
-	broken-cd;
-	sdhci,wp-inverted;
+	vmmc-supply = <&reg_sdio1_vmmc>;
+	vqmmc-supply = <&reg_sdio1_vqmmc>;
+	cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
 &sdhci2 {
-	broken-cd;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 63a48490e..2c34bfb13 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -43,6 +43,11 @@
 	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
 	compatible = "marvell,berlin2q", "marvell,berlin";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -53,6 +58,17 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
 		cpu@1 {
@@ -102,7 +118,8 @@
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip_clk CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+			clock-names = "io", "core";
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -110,7 +127,8 @@
 		sdhci1: sdhci@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
-			clocks = <&chip_clk CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+			clock-names = "io", "core";
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -119,7 +137,7 @@
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
+			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>;
 			clock-names = "io", "core";
 			status = "disabled";
 		};
@@ -152,7 +170,7 @@
 		};
 
 		usb_phy2: phy@a2f400 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xa2f400 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 14>;
@@ -170,7 +188,7 @@
 		};
 
 		usb_phy0: phy@b74000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb74000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 12>;
@@ -178,7 +196,7 @@
 		};
 
 		usb_phy1: phy@b78000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb78000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 13>;
@@ -293,7 +311,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1400 0x100>;
-				interrupt-parent = <&aic>;
 				interrupts = <4>;
 				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi0_pmux>;
@@ -306,7 +323,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1800 0x100>;
-				interrupt-parent = <&aic>;
 				interrupts = <5>;
 				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi1_pmux>;
@@ -401,6 +417,11 @@
 			soc_pinctrl: pin-controller {
 				compatible = "marvell,berlin2q-soc-pinctrl";
 
+				sd1_pmux: sd1-pmux {
+					groups = "G31";
+					function = "sd1";
+				};
+
 				twsi0_pmux: twsi0-pmux {
 					groups = "G6";
 					function = "twsi0";
@@ -477,6 +498,13 @@
 			status = "disabled";
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -485,6 +513,29 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
 			sm_gpio1: gpio@5000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x5000 0x400>;
@@ -505,7 +556,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x7000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <6>;
 				clocks = <&refclk>;
 				pinctrl-0 = <&twsi2_pmux>;
@@ -518,7 +568,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x8000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <7>;
 				clocks = <&refclk>;
 				pinctrl-0 = <&twsi3_pmux>;
@@ -529,7 +578,6 @@
 			uart0: uart@9000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x9000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <8>;
 				clocks = <&refclk>;
 				reg-shift = <2>;
@@ -541,7 +589,6 @@
 			uart1: uart@a000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0xa000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <9>;
 				clocks = <&refclk>;
 				reg-shift = <2>;
diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi
new file mode 100644
index 000000000..4af1adfee
--- /dev/null
+++ b/arch/arm/boot/dts/compulab-sb-som.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "CompuLab SB-SOM";
+	compatible = "compulab,sb-som";
+
+	vsb_3v3: fixedregulator-v3_3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsb_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	lcd0: display {
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	hdmi_conn: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+	};
+};
diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
index acd4fe183..ce7fca76b 100644
--- a/arch/arm/boot/dts/cros-adc-thermistors.dtsi
+++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
@@ -13,28 +13,28 @@
 */
 
 &adc {
-	ncp15wb473@3 {
+	thermistor3 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 3>;
 	};
-	ncp15wb473@4 {
+	thermistor4 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;
 	};
-	ncp15wb473@5 {
+	thermistor5 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 5>;
 	};
-	ncp15wb473@6 {
+	thermistor6 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index 4e42f30cb..c04510517 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -55,6 +55,7 @@
 			MATRIX_KEY(0x03, 0x04, KEY_F5)
 			MATRIX_KEY(0x03, 0x06, KEY_6)
 			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+			MATRIX_KEY(0x03, 0x09, KEY_F13)
 			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
 			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
 
diff --git a/arch/arm/boot/dts/cros-ec-sbs.dtsi b/arch/arm/boot/dts/cros-ec-sbs.dtsi
new file mode 100644
index 000000000..71f5c5ecc
--- /dev/null
+++ b/arch/arm/boot/dts/cros-ec-sbs.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Smart battery dts fragment for devices that use cros-ec-sbs
+ *
+ * Copyright (c) 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c_tunnel {
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0xb>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
index af333261d..a5a23c376 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -88,6 +88,20 @@
 		interrupts = <25>;
 	};
 
+	watchdog@f0000fc0 {
+		compatible = "cnxt,cx92755-wdt";
+		reg = <0xf0000fc0 0x8>;
+		clocks = <&main_clk>;
+		timeout-sec = <15>;
+	};
+
+	pinctrl: pinctrl@f0000e20 {
+		compatible = "cnxt,cx92755-pinctrl";
+		reg = <0xf0000e20 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	uc_regs: syscon@f00003a0 {
 		compatible = "cnxt,cx92755-uc", "syscon";
 		reg = <0xf00003a0 0x10>;
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts
index 90d52cc41..026f556c8 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cx92755_equinox.dts
@@ -64,15 +64,23 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 };
 
 &uart0 {
 	status = "okay";
+	pinctrl-0 = <&uart0_default>;
+	pinctrl-names = "default";
 };
 
 &i2c {
 	status = "okay";
 };
+
+&pinctrl {
+	uart0_default: uart0_active {
+		pins = "GP_O0", "GP_O1";
+		function = "client_b";
+	};
+};
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index e750ab908..14dff3e18 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -16,15 +16,29 @@
 	compatible = "enbw,cmc", "ti,da850";
 	model = "EnBW CMC";
 
-	soc {
-		serial0: serial@1c42000 {
+	soc@1c00000 {
+		serial0: serial@42000 {
 			status = "okay";
 		};
-		serial1: serial@1d0c000 {
+		serial1: serial@10c000 {
 			status = "okay";
 		};
-		serial2: serial@1d0d000 {
+		serial2: serial@10d000 {
+			status = "okay";
+		};
+		mdio: mdio@224000 {
+			status = "okay";
+		};
+		eth0: ethernet@220000 {
 			status = "okay";
 		};
 	};
 };
+
+&edma0 {
+	ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+	ti,edma-reserved-slot-ranges = <32 90>;
+};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 4f935ad9f..1a15db8e3 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -14,8 +14,8 @@
 	compatible = "ti,da850-evm", "ti,da850";
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
-	soc {
-		pmx_core: pinmux@1c14120 {
+	soc@1c00000 {
+		pmx_core: pinmux@14120 {
 			status = "okay";
 
 			mcasp0_pins: pinmux_mcasp0_pins {
@@ -30,19 +30,19 @@
 				>;
 			};
 		};
-		serial0: serial@1c42000 {
+		serial0: serial@42000 {
 			status = "okay";
 		};
-		serial1: serial@1d0c000 {
+		serial1: serial@10c000 {
 			status = "okay";
 		};
-		serial2: serial@1d0d000 {
+		serial2: serial@10d000 {
 			status = "okay";
 		};
-		rtc0: rtc@1c23000 {
+		rtc0: rtc@23000 {
 			status = "okay";
 		};
-		i2c0: i2c@1c22000 {
+		i2c0: i2c@22000 {
 			status = "okay";
 			clock-frequency = <100000>;
 			pinctrl-names = "default";
@@ -66,17 +66,17 @@
 			};
 
 		};
-		wdt: wdt@1c21000 {
+		wdt: wdt@21000 {
 			status = "okay";
 		};
-		mmc0: mmc@1c40000 {
+		mmc0: mmc@40000 {
 			max-frequency = <50000000>;
 			bus-width = <4>;
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins>;
 		};
-		spi1: spi@1f0e000 {
+		spi1: spi@30e000 {
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
@@ -116,18 +116,18 @@
 				};
 			};
 		};
-		mdio: mdio@1e24000 {
+		mdio: mdio@224000 {
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mdio_pins>;
 			bus_freq = <2200000>;
 		};
-		eth0: ethernet@1e20000 {
+		eth0: ethernet@220000 {
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mii_pins>;
 		};
-		gpio: gpio@1e26000 {
+		gpio: gpio@226000 {
 			status = "okay";
 		};
 	};
@@ -242,3 +242,11 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&edma0 {
+	ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+	ti,edma-reserved-slot-ranges = <32 90>;
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 0bd98cd00..25f0f8e6d 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -15,15 +15,15 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		intc: interrupt-controller {
+		intc: interrupt-controller@fffee000 {
 			compatible = "ti,cp-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			ti,intc-size = <100>;
+			ti,intc-size = <101>;
 			reg = <0xfffee000 0x2000>;
 		};
 	};
-	soc {
+	soc@1c00000 {
 		compatible = "simple-bus";
 		model = "da850";
 		#address-cells = <1>;
@@ -31,7 +31,7 @@
 		ranges = <0x0 0x01c00000 0x400000>;
 		interrupt-parent = <&intc>;
 
-		pmx_core: pinmux@1c14120 {
+		pmx_core: pinmux@14120 {
 			compatible = "pinctrl-single";
 			reg = <0x14120 0x50>;
 			#address-cells = <1>;
@@ -63,6 +63,12 @@
 					0x10 0x00002200 0x0000ff00
 				>;
 			};
+			i2c1_pins: pinmux_i2c1_pins {
+				pinctrl-single,bits = <
+					/* I2C1_SDA, I2C1_SCL */
+					0x10 0x00440000 0x00ff0000
+				>;
+			};
 			mmc0_pins: pinmux_mmc_pins {
 				pinctrl-single,bits = <
 					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
@@ -114,7 +120,19 @@
 					0x4 0x00000004 0x0000000f
 				>;
 			};
-			spi1_pins: pinmux_spi_pins {
+			spi0_pins: pinmux_spi0_pins {
+				pinctrl-single,bits = <
+					/* SIMO, SOMI, CLK */
+					0xc 0x00001101 0x0000ff0f
+				>;
+			};
+			spi0_cs0_pin: pinmux_spi0_cs0 {
+				pinctrl-single,bits = <
+					/* CS0 */
+					0x10 0x00000010 0x000000f0
+				>;
+			};
+			spi1_pins: pinmux_spi1_pins {
 				pinctrl-single,bits = <
 					/* SIMO, SOMI, CLK */
 					0x14 0x00110100 0x00ff0f00
@@ -150,41 +168,75 @@
 			};
 
 		};
-		edma0: edma@01c00000 {
-			compatible = "ti,edma3";
-			reg =	<0x0 0x10000>;
-			interrupts = <11 13 12>;
-			#dma-cells = <1>;
+		edma0: edma@0 {
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
+			reg =	<0x0 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <11 12>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+		};
+		edma0_tptc0: tptc@8000 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x8000 0x400>;
+			interrupts = <13>;
+			interrupt-names = "edm3_tcerrint";
+		};
+		edma0_tptc1: tptc@8400 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x8400 0x400>;
+			interrupts = <32>;
+			interrupt-names = "edm3_tcerrint";
+		};
+		edma1: edma@230000 {
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
+			reg =	<0x230000 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <93 94>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma1_tptc0 7>;
+		};
+		edma1_tptc0: tptc@238000 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x238000 0x400>;
+			interrupts = <95>;
+			interrupt-names = "edm3_tcerrint";
 		};
-		serial0: serial@1c42000 {
+		serial0: serial@42000 {
 			compatible = "ns16550a";
 			reg = <0x42000 0x100>;
 			reg-shift = <2>;
 			interrupts = <25>;
 			status = "disabled";
 		};
-		serial1: serial@1d0c000 {
+		serial1: serial@10c000 {
 			compatible = "ns16550a";
 			reg = <0x10c000 0x100>;
 			reg-shift = <2>;
 			interrupts = <53>;
 			status = "disabled";
 		};
-		serial2: serial@1d0d000 {
+		serial2: serial@10d000 {
 			compatible = "ns16550a";
 			reg = <0x10d000 0x100>;
 			reg-shift = <2>;
 			interrupts = <61>;
 			status = "disabled";
 		};
-		rtc0: rtc@1c23000 {
+		rtc0: rtc@23000 {
 			compatible = "ti,da830-rtc";
 			reg = <0x23000 0x1000>;
 			interrupts = <19
 				      19>;
 			status = "disabled";
 		};
-		i2c0: i2c@1c22000 {
+		i2c0: i2c@22000 {
 			compatible = "ti,davinci-i2c";
 			reg = <0x22000 0x1000>;
 			interrupts = <15>;
@@ -192,48 +244,76 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
-		wdt: wdt@1c21000 {
+		i2c1: i2c@228000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x228000 0x1000>;
+			interrupts = <51>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		wdt: wdt@21000 {
 			compatible = "ti,davinci-wdt";
 			reg = <0x21000 0x1000>;
 			status = "disabled";
 		};
-		mmc0: mmc@1c40000 {
+		mmc0: mmc@40000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x40000 0x1000>;
 			interrupts = <16>;
+			dmas = <&edma0 16 0>, <&edma0 17 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		mmc1: mmc@21b000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x21b000 0x1000>;
+			interrupts = <72>;
+			dmas = <&edma1 28 0>, <&edma1 29 0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
-		ehrpwm0: ehrpwm@01f00000 {
+		ehrpwm0: pwm@300000 {
 			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
 			status = "disabled";
 		};
-		ehrpwm1: ehrpwm@01f02000 {
+		ehrpwm1: pwm@302000 {
 			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
 			status = "disabled";
 		};
-		ecap0: ecap@01f06000 {
+		ecap0: ecap@306000 {
 			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
 			status = "disabled";
 		};
-		ecap1: ecap@01f07000 {
+		ecap1: ecap@307000 {
 			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
 			status = "disabled";
 		};
-		ecap2: ecap@01f08000 {
+		ecap2: ecap@308000 {
 			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
 			status = "disabled";
 		};
-		spi1: spi@1f0e000 {
+		spi0: spi@41000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,da830-spi";
+			reg = <0x41000 0x1000>;
+			num-cs = <6>;
+			ti,davinci-spi-intr-line = <1>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+		spi1: spi@30e000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "ti,da830-spi";
@@ -241,15 +321,18 @@
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <1>;
 			interrupts = <56>;
+			dmas = <&edma0 18 0>, <&edma0 19 0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
-		mdio: mdio@1e24000 {
+		mdio: mdio@224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x224000 0x1000>;
+			status = "disabled";
 		};
-		eth0: ethernet@1e20000 {
+		eth0: ethernet@220000 {
 			compatible = "ti,davinci-dm6467-emac";
 			reg = <0x220000 0x4000>;
 			ti,davinci-ctrl-reg-offset = <0x3000>;
@@ -262,10 +345,12 @@
 					35
 					36
 					>;
+			status = "disabled";
 		};
-		gpio: gpio@1e26000 {
+		gpio: gpio@226000 {
 			compatible = "ti,dm6441-gpio";
 			gpio-controller;
+			#gpio-cells = <2>;
 			reg = <0x226000 0x1000>;
 			interrupts = <42 IRQ_TYPE_EDGE_BOTH
 				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
@@ -277,7 +362,7 @@
 			status = "disabled";
 		};
 
-		mcasp0: mcasp@01d00000 {
+		mcasp0: mcasp@100000 {
 			compatible = "ti,da830-mcasp-audio";
 			reg = <0x100000 0x2000>,
 			      <0x102000 0x400000>;
@@ -285,8 +370,8 @@
 			interrupts = <54>;
 			interrupt-names = "common";
 			status = "disabled";
-			dmas = <&edma0 1>,
-				<&edma0 0>;
+			dmas = <&edma0 1 1>,
+				<&edma0 0 1>;
 			dma-names = "tx", "rx";
 		};
 	};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
new file mode 100644
index 000000000..4128fa918
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -0,0 +1,149 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "DM8148 EVM";
+	compatible = "ti,dm8148-evm", "ti,dm8148";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mmc1 {
+        status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+        status = "disabled";
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
new file mode 100644
index 000000000..3f184863e
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -0,0 +1,107 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm814x.dtsi"
+
+/ {
+	model = "HP t410 Smart Zero Client";
+	compatible = "hp,t410", "ti,dm8148";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* gpio9 seems to control USB VBUS regulator and/or hub power */
+	usb_power: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	dmas = <&edma_xbar 8 0 1	/* use SDTXEVT1 instead of MCASP0TX */
+		&edma_xbar 9 0 2>;	/* use SDRXEVT1 instead of MCASP0RX */
+	dma-names = "tx", "rx";
+	non-removable;
+};
+
+&pincntl {
+	sd2_pins: pinmux_sd2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[7] */
+			DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[6] */
+			DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[5] */
+			DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[4] */
+			DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[3] */
+			DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[2] */
+			DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[1] */
+			DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[0] */
+			DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1)		/* SD2_CLK */
+			DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2)	/* SD2_CMD */
+			DM814X_IOPAD(0x0920, PIN_INPUT | 40)	/* SD2_SDCD */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
new file mode 100644
index 000000000..c4671af0a
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -0,0 +1,339 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pllss {
+	/*
+	 * See TRM "2.6.10 Connected outputso DPLLS" and
+	 * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
+	 * connected except for hdmi and usb.
+	 */
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
+
+	adpll_sgx_ck: adpll@b0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xb0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50b0.adpll.dcoclkldo",
+				     "481c50b0.adpll.clkout",
+				     "481c50b0.adpll.clkoutldo";
+	};
+
+	adpll_hdvic_ck: adpll@e0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xe0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50e0.adpll.dcoclkldo",
+				     "481c50e0.adpll.clkout",
+				     "481c50e0.adpll.clkoutldo";
+	};
+
+	adpll_l3_ck: adpll@110 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x110 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5110.adpll.dcoclkldo",
+				     "481c5110.adpll.clkout",
+				     "481c5110.adpll.clkoutldo";
+	};
+
+	adpll_isp_ck: adpll@140 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x140 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5140.adpll.dcoclkldo",
+				     "481c5140.adpll.clkout",
+				     "481c5140.adpll.clkoutldo";
+	};
+
+	adpll_dss_ck: adpll@170 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x170 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5170.adpll.dcoclkldo",
+				     "481c5170.adpll.clkout",
+				     "481c5170.adpll.clkoutldo";
+	};
+
+	adpll_video0_ck: adpll@1a0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1a0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51a0.adpll.dcoclkldo",
+				     "481c51a0.adpll.clkout",
+				     "481c51a0.adpll.clkoutldo";
+	};
+
+	adpll_video1_ck: adpll@1d0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1d0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51d0.adpll.dcoclkldo",
+				     "481c51d0.adpll.clkout",
+				     "481c51d0.adpll.clkoutldo";
+	};
+
+	adpll_hdmi_ck: adpll@200 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x200 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5200.adpll.dcoclkldo",
+				     "481c5200.adpll.clkout",
+				     "481c5200.adpll.clkoutldo";
+	};
+
+	adpll_audio_ck: adpll@230 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x230 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5230.adpll.dcoclkldo",
+				     "481c5230.adpll.clkout",
+				     "481c5230.adpll.clkoutldo";
+	};
+
+	adpll_usb_ck: adpll@260 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x260 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5260.adpll.dcoclkldo",
+				     "481c5260.adpll.clkout",
+				     "481c5260.adpll.clkoutldo";
+	};
+
+	adpll_ddr_ck: adpll@290 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x290 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5290.adpll.dcoclkldo",
+				     "481c5290.adpll.clkout",
+				     "481c5290.adpll.clkoutldo";
+	};
+};
+
+&pllss_clocks {
+	timer1_fck: timer1_fck@2e0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x2e0>;
+	};
+
+	timer2_fck: timer2_fck@2e0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x2e0>;
+	};
+
+	/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&adpll_video0_ck 1
+			  &adpll_video1_ck 1
+			  &adpll_audio_ck 1>;
+		ti,bit-shift = <1>;
+		reg = <0x2e8>;
+	};
+
+	/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
+	sysclk18_ck: sysclk18_ck@2f0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x02f0>;
+	};
+};
+
+&scm_clocks {
+	devosc_ck: devosc_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0040>;
+	};
+
+	/* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */
+	auxosc_ck: auxosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22572900>;
+	};
+
+	/* Optional 32768Hz crystal or clock on RTCOSC pins */
+	rtcosc_ck: rtcosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	/* Optional external clock on TCLKIN pin, set rate in baord dts file */
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <1000000000>;
+	};
+};
+
+&prcm_clocks {
+	osc_src_ck: osc_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mpu_clksrc_ck: mpu_clksrc_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&devosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0040>;
+	};
+
+	/* Fixed divider clock 0.0016384 * devosc */
+	rtcdivider_ck: rtcdivider_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <128>;
+		clock-div = <78125>;
+	};
+
+	/* L4_HS 220 MHz*/
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	/* L4_FWCFG */
+	sysclk5_ck: sysclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	/* L4_LS 110 MHz */
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	sysclk8_ck: sysclk8_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_usb_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		compatible = "ti,divider-clock";
+		reg = <0x324>;
+		ti,max-div = <7>;
+		#clock-cells = <0>;
+		clocks = <&adpll_usb_ck 1>;
+	};
+
+	aud_clkin0_ck: aud_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	aud_clkin1_ck: aud_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	aud_clkin2_ck: aud_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
new file mode 100644
index 000000000..68e412c98
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -0,0 +1,576 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/dm814x.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,dm814";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		phy0 = &usb0_phy;
+		phy1 = &usb1_phy;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		usb: usb@47400000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47400000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+
+			usb0_phy: usb-phy@47401300 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401300 0x100>;
+				reg-names = "phy";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+			};
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401400 0x400
+				       0x47401000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401c00 0x400
+					0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@47402000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x47400000 0x1000
+					0x47402000 0x1000
+					0x47403000 0x1000
+					0x47404000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+			};
+		};
+
+		/*
+		 * See TRM "Table 1-317. L4LS Instance Summary" for hints.
+		 * It shows the module target agent registers though, so the
+		 * actual device is typically 0x1000 before the target agent
+		 * except in cases where the module is larger than 0x1000.
+		 */
+		l4ls: l4ls@48000000 {
+			compatible = "ti,dm814-l4ls", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x2000000>;
+
+			i2c1: i2c@28000 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "i2c1";
+				reg = <0x28000 0x1000>;
+				interrupts = <70>;
+			};
+
+			elm: elm@80000 {
+				compatible = "ti,814-elm";
+				ti,hwmods = "elm";
+				reg = <0x80000 0x2000>;
+				interrupts = <4>;
+			};
+
+			gpio1: gpio@32000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio1";
+				ti,gpio-always-on;
+				reg = <0x32000 0x2000>;
+				interrupts = <96>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@4c000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio2";
+				ti,gpio-always-on;
+				reg = <0x4c000 0x2000>;
+				interrupts = <98>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c2: i2c@2a000 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "i2c2";
+				reg = <0x2a000 0x1000>;
+				interrupts = <71>;
+			};
+
+			mcspi1: spi@30000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x30000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <65>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi1";
+				dmas = <&edma 16 0 &edma 17 0
+					&edma 18 0 &edma 19 0>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+			};
+
+			timer1: timer@2e000 {
+				compatible = "ti,dm814-timer";
+				reg = <0x2e000 0x2000>;
+				interrupts = <67>;
+				ti,hwmods = "timer1";
+				ti,timer-alwon;
+			};
+
+			uart1: uart@20000 {
+				compatible = "ti,omap3-uart";
+				ti,hwmods = "uart1";
+				reg = <0x20000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <72>;
+				dmas = <&edma 26 0 &edma 27 0>;
+				dma-names = "tx", "rx";
+			};
+
+			uart2: uart@22000 {
+				compatible = "ti,omap3-uart";
+				ti,hwmods = "uart2";
+				reg = <0x22000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <73>;
+				dmas = <&edma 28 0 &edma 29 0>;
+				dma-names = "tx", "rx";
+			};
+
+			uart3: uart@24000 {
+				compatible = "ti,omap3-uart";
+				ti,hwmods = "uart3";
+				reg = <0x24000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <74>;
+				dmas = <&edma 30 0 &edma 31 0>;
+				dma-names = "tx", "rx";
+			};
+
+			timer2: timer@40000 {
+				compatible = "ti,dm814-timer";
+				reg = <0x40000 0x2000>;
+				interrupts = <68>;
+				ti,hwmods = "timer2";
+			};
+
+			timer3: timer@42000 {
+				compatible = "ti,dm814-timer";
+				reg = <0x42000 0x2000>;
+				interrupts = <69>;
+				ti,hwmods = "timer3";
+			};
+
+			mmc1: mmc@60000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc1";
+				dmas = <&edma 24 0
+					&edma 25 0>;
+				dma-names = "tx", "rx";
+				interrupts = <64>;
+				interrupt-parent = <&intc>;
+				reg = <0x60000 0x1000>;
+			};
+
+			rtc: rtc@c0000 {
+				compatible = "ti,am3352-rtc", "ti,da830-rtc";
+				reg = <0xc0000 0x1000>;
+				interrupts = <75 76>;
+				ti,hwmods = "rtc";
+			};
+
+			mmc2: mmc@1d8000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc2";
+				dmas = <&edma 2 0
+					&edma 3 0>;
+				dma-names = "tx", "rx";
+				interrupts = <28>;
+				interrupt-parent = <&intc>;
+				reg = <0x1d8000 0x1000>;
+			};
+
+			control: control@140000 {
+				compatible = "ti,dm814-scm", "simple-bus";
+				reg = <0x140000 0x20000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x140000 0x20000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+
+					scm_clockdomains: clockdomains {
+					};
+				};
+
+				usb_ctrl_mod: control@620 {
+					compatible = "ti,am335x-usb-ctrl-module";
+					reg = <0x620 0x10
+						0x648 0x4>;
+					reg-names = "phy_ctrl", "wakeup";
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
+				/*
+				 * Note that silicon revision 2.1 and older
+				 * require input enabled (bit 18 set) for all
+				 * 3.3V I/Os to avoid cumulative hardware damage.
+				 * For more info, see errata advisory 2.1.87.
+				 * We leave bit 18 out of function-mask and rely
+				 * on the bootloader for it.
+				 */
+				pincntl: pinmux@800 {
+					compatible = "pinctrl-single";
+					reg = <0x800 0x438>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x307ff>;
+				};
+
+				usb1_phy: usb-phy@1b00 {
+					compatible = "ti,am335x-usb-phy";
+					reg = <0x1b00 0x100>;
+					reg-names = "phy";
+					ti,ctrl_mod = <&usb_ctrl_mod>;
+				};
+			};
+
+			prcm: prcm@180000 {
+				compatible = "ti,dm814-prcm", "simple-bus";
+				reg = <0x180000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x180000 0x2000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+
+			/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
+			pllss: pllss@1c5000 {
+				compatible = "ti,dm814-pllss", "simple-bus";
+				reg = <0x1c5000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1c5000 0x1000>;
+
+				pllss_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				pllss_clockdomains: clockdomains {
+				};
+			};
+
+			wdt1: wdt@1c7000 {
+				compatible = "ti,omap3-wdt";
+				ti,hwmods = "wd_timer";
+				reg = <0x1c7000 0x1000>;
+				interrupts = <91>;
+			};
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,dm814-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		/* Board must configure evtmux with edma_xbar for EDMA */
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			interrupts = <29>;
+			interrupt-parent = <&intc>;
+			reg = <0x47810000 0x1000>;
+		};
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
+			interrupts = <12 13 14>;
+			interrupt-names = "edma3_ccint", "edma3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+			ti,edma-memcpy-channels = <20 21>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <112>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <113>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <114>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc3: tptc@49b00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc3";
+			reg =	<0x49b00000 0x100000>;
+			interrupts = <115>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		/* See TRM "Table 1-318. L4HS Instance Summary" */
+		l4hs: l4hs@4a000000 {
+			compatible = "ti,dm814-l4hs", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a000000 0x1b4040>;
+		};
+
+		/* REVISIT: Move to live under l4hs once driver is fixed */
+		mac: ethernet@4a100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+			clock-names = "fck", "cpts";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			reg = <0x4a100000 0x800
+			       0x4a100900 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			/*
+			 * c0_rx_thresh_pend
+			 * c0_rx_pend
+			 * c0_tx_pend
+			 * c0_misc_pend
+			 */
+			interrupts = <40 41 42 43>;
+			ranges;
+			syscon = <&scm_conf>;
+
+			davinci_mdio: mdio@4a100800 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a100800 0x100>;
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@48140650 {
+				compatible = "ti,am3352-cpsw-phy-sel";
+				reg= <0x48140650 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			reg = <0x50000000 0x2000>;
+			interrupts = <100>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+#include "dm814x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 169a85578..f50348bdd 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "dm816x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "DM8168 EVM";
@@ -85,8 +86,12 @@
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		linux,mtd-name= "micron,mt29f2g16aadwp";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
@@ -106,12 +111,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		partition@0 {
diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/dm816x-clocks.dtsi
index 50d9d338f..51865eb84 100644
--- a/arch/arm/boot/dts/dm816x-clocks.dtsi
+++ b/arch/arm/boot/dts/dm816x-clocks.dtsi
@@ -86,7 +86,7 @@
 
 /* 0x48180000 */
 &prcm_clocks {
-	clkout_pre_ck: clkout_pre_ck {
+	clkout_pre_ck: clkout_pre_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
@@ -94,7 +94,7 @@
 		reg = <0x100>;
 	};
 
-	clkout_div_ck: clkout_div_ck {
+	clkout_div_ck: clkout_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&clkout_pre_ck>;
@@ -103,7 +103,7 @@
 		reg = <0x100>;
 	};
 
-	clkout_ck: clkout_ck {
+	clkout_ck: clkout_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkout_div_ck>;
@@ -112,7 +112,7 @@
 	};
 
 	/* CM_DPLL clocks p1795 */
-	sysclk1_ck: sysclk1_ck {
+	sysclk1_ck: sysclk1_ck@300 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 1>;
@@ -120,7 +120,7 @@
 		reg = <0x0300>;
 	};
 
-	sysclk2_ck: sysclk2_ck {
+	sysclk2_ck: sysclk2_ck@304 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 2>;
@@ -128,7 +128,7 @@
 		reg = <0x0304>;
 	};
 
-	sysclk3_ck: sysclk3_ck {
+	sysclk3_ck: sysclk3_ck@308 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 3>;
@@ -136,7 +136,7 @@
 		reg = <0x0308>;
 	};
 
-	sysclk4_ck: sysclk4_ck {
+	sysclk4_ck: sysclk4_ck@30c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 4>;
@@ -144,7 +144,7 @@
 		reg = <0x030c>;
 	};
 
-	sysclk5_ck: sysclk5_ck {
+	sysclk5_ck: sysclk5_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sysclk4_ck>;
@@ -152,7 +152,7 @@
 		reg = <0x0310>;
 	};
 
-	sysclk6_ck: sysclk6_ck {
+	sysclk6_ck: sysclk6_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 4>;
@@ -160,7 +160,7 @@
 		reg = <0x0314>;
 	};
 
-	sysclk10_ck: sysclk10_ck {
+	sysclk10_ck: sysclk10_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&ddr_fapll 2>;
@@ -168,7 +168,7 @@
 		reg = <0x0324>;
 	};
 
-	sysclk24_ck: sysclk24_ck {
+	sysclk24_ck: sysclk24_ck@3b4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 5>;
@@ -176,7 +176,7 @@
 		reg = <0x03b4>;
 	};
 
-	mpu_ck: mpu_ck {
+	mpu_ck: mpu_ck@15dc {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sysclk2_ck>;
@@ -184,7 +184,7 @@
                 reg = <0x15dc>;
 	};
 
-	audio_pll_a_ck: audio_pll_a_ck {
+	audio_pll_a_ck: audio_pll_a_ck@35c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&audio_fapll 1>;
@@ -192,56 +192,56 @@
 		reg = <0x035c>;
 	};
 
-	sysclk18_ck: sysclk18_ck {
+	sysclk18_ck: sysclk18_ck@378 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
 		reg = <0x0378>;
 	};
 
-	timer1_fck: timer1_fck {
+	timer1_fck: timer1_fck@390 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x0390>;
 	};
 
-	timer2_fck: timer2_fck {
+	timer2_fck: timer2_fck@394 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x0394>;
 	};
 
-	timer3_fck: timer3_fck {
+	timer3_fck: timer3_fck@398 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x0398>;
 	};
 
-	timer4_fck: timer4_fck {
+	timer4_fck: timer4_fck@39c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x039c>;
 	};
 
-	timer5_fck: timer5_fck {
+	timer5_fck: timer5_fck@3a0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x03a0>;
 	};
 
-	timer6_fck: timer6_fck {
+	timer6_fck: timer6_fck@3a4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x03a4>;
 	};
 
-	timer7_fck: timer7_fck {
+	timer7_fck: timer7_fck@3a8 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 289806adb..44e39c743 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -58,13 +58,12 @@
 	 * the whole bus hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap3-l3-smx", "simple-bus";
+		compatible = "simple-bus";
 		reg = <0x44000000 0x10000>;
 		interrupts = <9 10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		ti,hwmods = "l3_main";
 
 		prcm: prcm@48180000 {
 			compatible = "ti,dm816-prcm";
@@ -180,8 +179,14 @@
 			#address-cells = <2>;
 			#size-cells = <1>;
 			interrupts = <100>;
+			dmas = <&edma 52>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <6>;
 			gpmc,num-waitpins = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		i2c1: i2c@48028000 {
@@ -213,11 +218,19 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		rtc: rtc@480c0000 {
+			compatible = "ti,am3352-rtc", "ti,da830-rtc";
+			reg = <0x480c0000 0x1000>;
+			interrupts = <75 76>;
+			ti,hwmods = "rtc";
+		};
+
 		mailbox: mailbox@480c8000 {
 			compatible = "ti,omap4-mailbox";
 			reg = <0x480c8000 0x2000>;
 			interrupts = <77>;
 			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
 			mbox_dsp: mbox_dsp {
@@ -226,6 +239,13 @@
 			};
 		};
 
+		spinbox: spinbox@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x2000>;
+			ti,hwmods = "spinbox";
+			#hwlock-cells = <1>;
+		};
+
 		mdio: mdio@4a100800 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
@@ -279,8 +299,11 @@
 			ti,spi-num-cs = <4>;
 			ti,hwmods = "mcspi1";
 			dmas = <&edma 16 &edma 17
-				&edma 18 &edma 19>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
+				&edma 18 &edma 19
+				&edma 20 &edma 21
+				&edma 22 &edma 23>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
 		};
 
 		mmc1: mmc@48060000 {
@@ -319,6 +342,7 @@
 			reg = <0x48044000 0x2000>;
 			interrupts = <92>;
 			ti,hwmods = "timer4";
+			ti,timer-pwm;
 		};
 
 		timer5: timer@48046000 {
@@ -326,6 +350,7 @@
 			reg = <0x48046000 0x2000>;
 			interrupts = <93>;
 			ti,hwmods = "timer5";
+			ti,timer-pwm;
 		};
 
 		timer6: timer@48048000 {
@@ -333,6 +358,7 @@
 			reg = <0x48048000 0x2000>;
 			interrupts = <94>;
 			ti,hwmods = "timer6";
+			ti,timer-pwm;
 		};
 
 		timer7: timer@4804a000 {
@@ -340,6 +366,7 @@
 			reg = <0x4804a000 0x2000>;
 			interrupts = <95>;
 			ti,hwmods = "timer7";
+			ti,timer-pwm;
 		};
 
 		uart1: uart@48020000 {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index e6fa251e1..af3cb6331 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -62,6 +62,10 @@
 		pinctrl-0 = <&pmx_gpio_19>;
 		pinctrl-names = "default";
 	};
+
+	gpu-subsystem {
+		status = "okay";
+	};
 };
 
 &uart0 { status = "okay"; };
@@ -74,6 +78,10 @@
 	reg = <1>;
 };
 
+&gpu {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 38b1f7e60..698d58cea 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -33,6 +33,12 @@
 		marvell,tauros2-cache-features = <0>;
 	};
 
+	gpu-subsystem {
+		compatible = "marvell,dove-gpu-subsystem";
+		cores = <&gpu>;
+		status = "disabled";
+	};
+
 	i2c-mux {
 		compatible = "i2c-mux-pinctrl";
 		#address-cells = <1>;
@@ -263,12 +269,13 @@
 			};
 
 			crypto: crypto-engine@30000 {
-				compatible = "marvell,orion-crypto";
-				reg = <0x30000 0x10000>,
-				      <0xffffe000 0x800>;
-				reg-names = "regs", "sram";
+				compatible = "marvell,dove-crypto";
+				reg = <0x30000 0x10000>;
+				reg-names = "regs";
 				interrupts = <31>;
 				clocks = <&gate_clk 15>;
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x800>;
 				status = "okay";
 			};
 
@@ -419,293 +426,331 @@
 				status = "disabled";
 			};
 
-			thermal: thermal-diode@d001c {
-				compatible = "marvell,dove-thermal";
-				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
-			};
-
-			gate_clk: clock-gating-ctrl@d0038 {
-				compatible = "marvell,dove-gating-clock";
-				reg = <0xd0038 0x4>;
-				clocks = <&core_clk 0>;
-				#clock-cells = <1>;
-			};
-
-			pinctrl: pin-ctrl@d0200 {
-				compatible = "marvell,dove-pinctrl";
-				reg = <0xd0200 0x14>,
-				      <0xd0440 0x04>;
-				clocks = <&gate_clk 22>;
-
-				pmx_gpio_0: pmx-gpio-0 {
-					marvell,pins = "mpp0";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_1: pmx-gpio-1 {
-					marvell,pins = "mpp1";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_2: pmx-gpio-2 {
-					marvell,pins = "mpp2";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_3: pmx-gpio-3 {
-					marvell,pins = "mpp3";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_4: pmx-gpio-4 {
-					marvell,pins = "mpp4";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_5: pmx-gpio-5 {
-					marvell,pins = "mpp5";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_6: pmx-gpio-6 {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_7: pmx-gpio-7 {
-					marvell,pins = "mpp7";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_8: pmx-gpio-8 {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_9: pmx-gpio-9 {
-					marvell,pins = "mpp9";
-					marvell,function = "gpio";
-				};
-
-				pmx_pcie1_clkreq: pmx-pcie1-clkreq {
-					marvell,pins = "mpp9";
-					marvell,function = "pex1";
-				};
-
-				pmx_gpio_10: pmx-gpio-10 {
-					marvell,pins = "mpp10";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_11: pmx-gpio-11 {
-					marvell,pins = "mpp11";
-					marvell,function = "gpio";
-				};
-
-				pmx_pcie0_clkreq: pmx-pcie0-clkreq {
-					marvell,pins = "mpp11";
-					marvell,function = "pex0";
-				};
-
-				pmx_gpio_12: pmx-gpio-12 {
-					marvell,pins = "mpp12";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_13: pmx-gpio-13 {
-					marvell,pins = "mpp13";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_extclk: pmx-audio1-extclk {
-					marvell,pins = "mpp13";
-					marvell,function = "audio1";
-				};
-
-				pmx_gpio_14: pmx-gpio-14 {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_15: pmx-gpio-15 {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_16: pmx-gpio-16 {
-					marvell,pins = "mpp16";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_17: pmx-gpio-17 {
-					marvell,pins = "mpp17";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_18: pmx-gpio-18 {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_19: pmx-gpio-19 {
-					marvell,pins = "mpp19";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_20: pmx-gpio-20 {
-					marvell,pins = "mpp20";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_21: pmx-gpio-21 {
-					marvell,pins = "mpp21";
-					marvell,function = "gpio";
-				};
-
-				pmx_camera: pmx-camera {
-					marvell,pins = "mpp_camera";
-					marvell,function = "camera";
-				};
-
-				pmx_camera_gpio: pmx-camera-gpio {
-					marvell,pins = "mpp_camera";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio0: pmx-sdio0 {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "sdio0";
-				};
-
-				pmx_sdio0_gpio: pmx-sdio0-gpio {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio1: pmx-sdio1 {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "sdio1";
-				};
-
-				pmx_sdio1_gpio: pmx-sdio1-gpio {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_gpio: pmx-audio1-gpio {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "i2s1/spdifo";
-				};
-
-				pmx_spi0: pmx-spi0 {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "spi0";
-				};
-
-				pmx_spi0_gpio: pmx-spi0-gpio {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "gpio";
-				};
-
-				pmx_spi1_4_7: pmx-spi1-4-7 {
-					marvell,pins = "mpp4", "mpp5",
-						"mpp6", "mpp7";
-					marvell,function = "spi1";
-				};
-
-				pmx_spi1_20_23: pmx-spi1-20-23 {
-					marvell,pins = "mpp20", "mpp21",
-						"mpp22", "mpp23";
-					marvell,function = "spi1";
-				};
-
-				pmx_uart1: pmx-uart1 {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "uart1";
-				};
-
-				pmx_uart1_gpio: pmx-uart1-gpio {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "gpio";
-				};
-
-				pmx_nand: pmx-nand {
-					marvell,pins = "mpp_nand";
-					marvell,function = "nand";
-				};
-
-				pmx_nand_gpo: pmx-nand-gpo {
-					marvell,pins = "mpp_nand";
-					marvell,function = "gpo";
-				};
-
-				pmx_i2c1: pmx-i2c1 {
-					marvell,pins = "mpp17", "mpp19";
-					marvell,function = "twsi";
-				};
-
-				pmx_i2c2: pmx-i2c2 {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "twsi";
-				};
-
-				pmx_ssp_i2c2: pmx-ssp-i2c2 {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "ssp/twsi";
-				};
-
-				pmx_i2cmux_0: pmx-i2cmux-0 {
-					marvell,pins = "twsi";
-					marvell,function = "twsi-opt1";
-				};
-
-				pmx_i2cmux_1: pmx-i2cmux-1 {
-					marvell,pins = "twsi";
-					marvell,function = "twsi-opt2";
-				};
-
-				pmx_i2cmux_2: pmx-i2cmux-2 {
-					marvell,pins = "twsi";
-					marvell,function = "twsi-opt3";
-				};
-			};
-
-			core_clk: core-clocks@d0214 {
-				compatible = "marvell,dove-core-clock";
-				reg = <0xd0214 0x4>;
-				#clock-cells = <1>;
-			};
-
-			gpio0: gpio-ctrl@d0400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0400 0x20>;
-				ngpios = <32>;
+			pmu: power-management@d0000 {
+				compatible = "marvell,dove-pmu", "simple-bus";
+				reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+				ranges = <0x00000000 0x000d0000 0x8000
+					  0x00008000 0x000d8000 0x8000>;
+				interrupts = <33>;
 				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <12>, <13>, <14>, <60>;
-			};
-
-			gpio1: gpio-ctrl@d0420 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0420 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <61>;
-			};
-
-			rtc: real-time-clock@d8500 {
-				compatible = "marvell,orion-rtc";
-				reg = <0xd8500 0x20>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#interrupt-cells = <1>;
+				#reset-cells = <1>;
+
+				domains {
+					vpu_domain: vpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000008>;
+						marvell,pmu_iso_mask = <0x00000001>;
+						resets = <&pmu 16>;
+					};
+
+					gpu_domain: gpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000004>;
+						marvell,pmu_iso_mask = <0x00000002>;
+						resets = <&pmu 18>;
+					};
+				};
+
+				thermal: thermal-diode@001c {
+					compatible = "marvell,dove-thermal";
+					reg = <0x001c 0x0c>, <0x005c 0x08>;
+				};
+
+				gate_clk: clock-gating-ctrl@0038 {
+					compatible = "marvell,dove-gating-clock";
+					reg = <0x0038 0x4>;
+					clocks = <&core_clk 0>;
+					#clock-cells = <1>;
+				};
+
+				divider_clk: core-clock@0064 {
+					compatible = "marvell,dove-divider-clock";
+					reg = <0x0064 0x8>;
+					#clock-cells = <1>;
+				};
+
+				pinctrl: pin-ctrl@0200 {
+					compatible = "marvell,dove-pinctrl";
+					reg = <0x0200 0x14>,
+					      <0x0440 0x04>;
+					clocks = <&gate_clk 22>;
+
+					pmx_gpio_0: pmx-gpio-0 {
+						marvell,pins = "mpp0";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_1: pmx-gpio-1 {
+						marvell,pins = "mpp1";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_2: pmx-gpio-2 {
+						marvell,pins = "mpp2";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_3: pmx-gpio-3 {
+						marvell,pins = "mpp3";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_4: pmx-gpio-4 {
+						marvell,pins = "mpp4";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_5: pmx-gpio-5 {
+						marvell,pins = "mpp5";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_6: pmx-gpio-6 {
+						marvell,pins = "mpp6";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_7: pmx-gpio-7 {
+						marvell,pins = "mpp7";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_8: pmx-gpio-8 {
+						marvell,pins = "mpp8";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_9: pmx-gpio-9 {
+						marvell,pins = "mpp9";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie1_clkreq: pmx-pcie1-clkreq {
+						marvell,pins = "mpp9";
+						marvell,function = "pex1";
+					};
+
+					pmx_gpio_10: pmx-gpio-10 {
+						marvell,pins = "mpp10";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_11: pmx-gpio-11 {
+						marvell,pins = "mpp11";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie0_clkreq: pmx-pcie0-clkreq {
+						marvell,pins = "mpp11";
+						marvell,function = "pex0";
+					};
+
+					pmx_gpio_12: pmx-gpio-12 {
+						marvell,pins = "mpp12";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_13: pmx-gpio-13 {
+						marvell,pins = "mpp13";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_extclk: pmx-audio1-extclk {
+						marvell,pins = "mpp13";
+						marvell,function = "audio1";
+					};
+
+					pmx_gpio_14: pmx-gpio-14 {
+						marvell,pins = "mpp14";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_15: pmx-gpio-15 {
+						marvell,pins = "mpp15";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_16: pmx-gpio-16 {
+						marvell,pins = "mpp16";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_17: pmx-gpio-17 {
+						marvell,pins = "mpp17";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_18: pmx-gpio-18 {
+						marvell,pins = "mpp18";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_19: pmx-gpio-19 {
+						marvell,pins = "mpp19";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_20: pmx-gpio-20 {
+						marvell,pins = "mpp20";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_21: pmx-gpio-21 {
+						marvell,pins = "mpp21";
+						marvell,function = "gpio";
+					};
+
+					pmx_camera: pmx-camera {
+						marvell,pins = "mpp_camera";
+						marvell,function = "camera";
+					};
+
+					pmx_camera_gpio: pmx-camera-gpio {
+						marvell,pins = "mpp_camera";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio0: pmx-sdio0 {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "sdio0";
+					};
+
+					pmx_sdio0_gpio: pmx-sdio0-gpio {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio1: pmx-sdio1 {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "sdio1";
+					};
+
+					pmx_sdio1_gpio: pmx-sdio1-gpio {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_gpio: pmx-audio1-gpio {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "i2s1/spdifo";
+					};
+
+					pmx_spi0: pmx-spi0 {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "spi0";
+					};
+
+					pmx_spi0_gpio: pmx-spi0-gpio {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "gpio";
+					};
+
+					pmx_spi1_4_7: pmx-spi1-4-7 {
+						marvell,pins = "mpp4", "mpp5",
+							"mpp6", "mpp7";
+						marvell,function = "spi1";
+					};
+
+					pmx_spi1_20_23: pmx-spi1-20-23 {
+						marvell,pins = "mpp20", "mpp21",
+							"mpp22", "mpp23";
+						marvell,function = "spi1";
+					};
+
+					pmx_uart1: pmx-uart1 {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "uart1";
+					};
+
+					pmx_uart1_gpio: pmx-uart1-gpio {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "gpio";
+					};
+
+					pmx_nand: pmx-nand {
+						marvell,pins = "mpp_nand";
+						marvell,function = "nand";
+					};
+
+					pmx_nand_gpo: pmx-nand-gpo {
+						marvell,pins = "mpp_nand";
+						marvell,function = "gpo";
+					};
+
+					pmx_i2c1: pmx-i2c1 {
+						marvell,pins = "mpp17", "mpp19";
+						marvell,function = "twsi";
+					};
+
+					pmx_i2c2: pmx-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "twsi";
+					};
+
+					pmx_ssp_i2c2: pmx-ssp-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "ssp/twsi";
+					};
+
+					pmx_i2cmux_0: pmx-i2cmux-0 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt1";
+					};
+
+					pmx_i2cmux_1: pmx-i2cmux-1 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt2";
+					};
+
+					pmx_i2cmux_2: pmx-i2cmux-2 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt3";
+					};
+				};
+
+				core_clk: core-clocks@0214 {
+					compatible = "marvell,dove-core-clock";
+					reg = <0x0214 0x4>;
+					#clock-cells = <1>;
+				};
+
+				gpio0: gpio-ctrl@0400 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0400 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <12>, <13>, <14>, <60>;
+				};
+
+				gpio1: gpio-ctrl@0420 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0420 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <61>;
+				};
+
+				rtc: real-time-clock@8500 {
+					compatible = "marvell,orion-rtc";
+					reg = <0x8500 0x20>;
+					interrupts = <5>;
+				};
 			};
 
 			gconf: global-config@e802c {
@@ -735,6 +780,24 @@
 				interrupts = <47>;
 				status = "disabled";
 			};
+
+			crypto_sram: sa-sram@ffffe000 {
+				compatible = "mmio-sram";
+				reg = <0xffffe000 0x800>;
+				clocks = <&gate_clk 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			gpu: gpu@840000 {
+				clocks = <&divider_clk 1>;
+				clock-names = "core";
+				compatible = "vivante,gc";
+				interrupts = <48>;
+				power-domains = <&gpu_domain>;
+				reg = <0x840000 0x4000>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi
new file mode 100644
index 000000000..0e4974174
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x-clocks.dtsi
@@ -0,0 +1,49 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dm814x-clocks.dtsi"
+
+/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
+&adpll_hdvic_ck {
+	status = "disabled";
+};
+
+&adpll_l3_ck {
+	status = "disabled";
+};
+
+&adpll_dss_ck {
+	status = "disabled";
+};
+
+/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
+&sysclk4_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk5_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk6_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+/*
+ * Compared to dm814x, dra62x has different shifts and more mux options.
+ * Please add the extra options for ysclk_14 and 16 if really needed.
+ */
+&timer1_fck {
+	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+	ti,bit-shift = <4>;
+};
+
+&timer2_fck {
+	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+	ti,bit-shift = <8>;
+};
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
new file mode 100644
index 000000000..f820573f4
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -0,0 +1,138 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra62x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "DRA62x J5 Eco EVM";
+	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+};
+
+/* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "otg";
+};
+
+&usb1_phy {
+	status = "disabled";
+};
+
+&usb1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
new file mode 100644
index 000000000..d3cbb4ea3
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x.dtsi
@@ -0,0 +1,23 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "dm814x.dtsi"
+
+/ {
+	compatible = "ti,dra62x";
+};
+
+/* Compared to dm814x, dra62x has different offsets for Ethernet */
+&mac {
+	reg = <0x4a100000 0x800
+		0x4a101200 0x100>;
+};
+
+&davinci_mdio {
+	reg = <0x4a101000 0x100>;
+};
+
+#include "dra62x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
new file mode 100644
index 000000000..1c39a8459
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     3>;
+
+	trips {
+		dspeve_crit: dspeve_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 096f68be9..bafcfac06 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -9,6 +9,8 @@
 
 #include "dra74x.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "TI DRA742";
@@ -16,14 +18,33 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x60000000>; /* 1536 MB */
+		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
 	};
 
-	mmc2_3v3: fixedregulator-mmc2 {
+	evm_3v3_sd: fixedregulator-sd {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc2_3v3";
+		regulator-name = "evm_3v3_sd";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	evm_3v3_sw: fixedregulator-evm_3v3_sw {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sw";
+		vin-supply = <&sysen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 	};
 
 	extcon_usb1: extcon_usb1 {
@@ -44,8 +65,89 @@
 		regulator-always-on;
 		regulator-boot-on;
 		enable-active-high;
+		vin-supply = <&sysen2>;
 		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
 	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "dra7:usr1";
+			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "dra7:usr2";
+			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "dra7:usr3";
+			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "dra7:usr4";
+			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		USER1 {
+			label = "btnUser1";
+			linux,code = <BTN_0>;
+			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+		};
+
+		USER2 {
+			label = "btnUser2";
+			linux,code = <BTN_1>;
+			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &dra7_pmx_core {
@@ -54,163 +156,149 @@
 
 	vtt_pin: pinmux_vtt_pin {
 		pinctrl-single,pins = <
-			0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+			DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
-			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
-			0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
+			DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
+			DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+			DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+			DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+			DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+			DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
 		>;
 	};
 
 	mcspi2_pins: pinmux_mcspi2_pins {
 		pinctrl-single,pins = <
-			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
-			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+			DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
+			DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
-			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
-			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
-			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
+			DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
+			DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
-			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
-			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
-			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
-		>;
-	};
-
-	qspi1_pins: pinmux_qspi1_pins {
-		pinctrl-single,pins = <
-			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
-			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
-			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
-			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
 		>;
 	};
 
 	usb1_pins: pinmux_usb1_pins {
                 pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
                 >;
         };
 
 	usb2_pins: pinmux_usb2_pins {
                 pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
                 >;
         };
 
 	nand_flash_x16: nand_flash_x16 {
 		/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
 		 * So NAND flash requires following switch settings:
-		 * SW5.9 (GPMC_WPN) = LOW
-		 * SW5.1 (NAND_BOOTn) = HIGH */
+		 * SW5.1 (NAND_BOOTn) = ON (LOW)
+		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
+		 */
 		pinctrl-single,pins = <
-			0x0 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
-			0x4 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
-			0x8 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
-			0xc 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
-			0x10	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
-			0x14	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
-			0x18	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
-			0x1c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
-			0x20	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
-			0x24	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
-			0x28	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
-			0x2c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
-			0x30	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
-			0x34	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
-			0x38	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
-			0x3c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
-			0xd8	(PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
-			0xcc	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
-			0xb4	(PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
-			0xc4	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
-			0xc8	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
-			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
+			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
+			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
+			DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
+			DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
+			DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
+			DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
+			DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
+			DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
+			DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
+			DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
+			DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
+			DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
+			DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
+			DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
+			DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
+			DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
+			DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
+			DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
+			DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
+			DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
+			DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
+			DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txc.rgmii0_txc */
-			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txctl.rgmii0_txctl */
-			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3.rgmii0_txd3 */
-			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd2.rgmii0_txd2 */
-			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd1.rgmii0_txd1 */
-			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd0.rgmii0_txd0 */
-			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxc.rgmii0_rxc */
-			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxctl.rgmii0_rxctl */
-			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd3.rgmii0_rxd3 */
-			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd2.rgmii0_rxd2 */
-			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd1.rgmii0_rxd1 */
-			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd0.rgmii0_rxd0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txc.rgmii0_txc */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txctl.rgmii0_txctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3.rgmii0_txd3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd2.rgmii0_txd2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd1.rgmii0_txd1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd0.rgmii0_txd0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxc.rgmii0_rxc */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxctl.rgmii0_rxctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd3.rgmii0_rxd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd2.rgmii0_rxd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd1.rgmii0_rxd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd0.rgmii0_rxd0 */
 
 			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
 		>;
 
 	};
@@ -218,60 +306,85 @@
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (MUX_MODE15)
-			0x254 (MUX_MODE15)
-			0x258 (MUX_MODE15)
-			0x25c (MUX_MODE15)
-			0x260 (MUX_MODE15)
-			0x264 (MUX_MODE15)
-			0x268 (MUX_MODE15)
-			0x26c (MUX_MODE15)
-			0x270 (MUX_MODE15)
-			0x274 (MUX_MODE15)
-			0x278 (MUX_MODE15)
-			0x27c (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
 
 			/* Slave 2 */
-			0x198 (MUX_MODE15)
-			0x19c (MUX_MODE15)
-			0x1a0 (MUX_MODE15)
-			0x1a4 (MUX_MODE15)
-			0x1a8 (MUX_MODE15)
-			0x1ac (MUX_MODE15)
-			0x1b0 (MUX_MODE15)
-			0x1b4 (MUX_MODE15)
-			0x1b8 (MUX_MODE15)
-			0x1bc (MUX_MODE15)
-			0x1c0 (MUX_MODE15)
-			0x1c4 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
+			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
-			0x23c (MUX_MODE15)
-			0x240 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
 		>;
 	};
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x418   (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+		>;
+	};
+
+	atl_pins: pinmux_atl_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
+			DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
+		>;
+	};
+
+	mcasp3_pins: pinmux_mcasp3_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
 		>;
 	};
 };
@@ -303,7 +416,7 @@
 					/* VDD_DSPEVE */
 					regulator-name = "smps45";
 					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1150000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
@@ -321,7 +434,7 @@
 					/* CORE_VDD */
 					regulator-name = "smps7";
 					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1060000>;
+					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
@@ -349,6 +462,7 @@
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
 					regulator-boot-on;
 				};
 
@@ -378,6 +492,7 @@
 					regulator-max-microvolt = <1050000>;
 					regulator-always-on;
 					regulator-boot-on;
+					regulator-allow-bypass;
 				};
 
 				ldoln_reg: ldoln {
@@ -396,12 +511,48 @@
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
 				};
+
+				/* REGEN1 is unused */
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resources */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				/* REGEN3 is unused */
+
+				sysen1: sysen1 {
+					/* PMIC_REGEN_3V3 */
+					regulator-name = "sysen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sysen2: sysen2 {
+					/* PMIC_REGEN_DDR */
+					regulator-name = "sysen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
 			};
 		};
 	};
 
+	pcf_lcd: gpio@20 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	pcf_gpio_21: gpio@21 {
-		compatible = "ti,pcf8575";
+		compatible = "ti,pcf8575", "nxp,pcf8575";
 		reg = <0x21>;
 		lines-initial-states = <0x1408>;
 		gpio-controller;
@@ -412,6 +563,20 @@
 		#interrupt-cells = <2>;
 	};
 
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
 };
 
 &i2c2 {
@@ -419,6 +584,20 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
+
+	pcf_hdmi: gpio@26 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
 };
 
 &i2c3 {
@@ -462,13 +641,19 @@
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&ldo1_reg>;
+	vmmc-supply = <&evm_3v3_sd>;
+	vmmc_aux-supply = <&ldo1_reg>;
 	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is always hardwired.
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 };
 
 &mmc2 {
 	status = "okay";
-	vmmc-supply = <&mmc2_3v3>;
+	vmmc-supply = <&evm_3v3_sw>;
 	bus-width = <8>;
 };
 
@@ -478,18 +663,14 @@
 
 &qspi {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_pins>;
 
-	spi-max-frequency = <48000000>;
+	spi-max-frequency = <64000000>;
 	m25p80@0 {
 		compatible = "s25fl256s1";
-		spi-max-frequency = <48000000>;
+		spi-max-frequency = <64000000>;
 		reg = <0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -569,9 +750,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x16>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
@@ -594,7 +780,6 @@
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
 		/* All SPL-* partitions are sized to minimal length
@@ -691,3 +876,64 @@
 	pinctrl-1 = <&dcan1_pins_sleep>;
 	pinctrl-2 = <&dcan1_pins_default>;
 };
+
+&atl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&atl_pins>;
+
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_gfclk_mux>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins>;
+	pinctrl-1 = <&mcasp3_sleep_pins>;
+
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
new file mode 100644
index 000000000..dd74a5337
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC IVA thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+iva_thermal: iva_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     4>;
+
+	trips {
+		iva_crit: iva_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 1e29ccf77..d9bfb94a2 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -15,8 +15,8 @@
 #define MAX_SOURCES 400
 
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	compatible = "ti,dra7xx";
 	interrupt-parent = <&crossbar_mpu>;
@@ -41,6 +41,7 @@
 		ethernet1 = &cpsw_emac1;
 		d_can0 = &dcan1;
 		d_can1 = &dcan2;
+		spi0 = &qspi;
 	};
 
 	timer {
@@ -56,10 +57,10 @@
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
+		reg = <0x0 0x48211000 0x0 0x1000>,
+		      <0x0 0x48212000 0x0 0x1000>,
+		      <0x0 0x48214000 0x0 0x2000>,
+		      <0x0 0x48216000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 		interrupt-parent = <&gic>;
 	};
@@ -68,10 +69,53 @@
 		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
+		reg = <0x0 0x48281000 0x0 0x1000>;
 		interrupt-parent = <&gic>;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points-v2 = <&cpu0_opp_table>;
+			ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>;
+			ti,syscon-rev = <&scm_wkup 0x204>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp_nom@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1060000 850000 1150000>;
+			opp-supported-hw = <0xFF 0x01>;
+			opp-suspend;
+		};
+
+		opp_od@1176000000 {
+			opp-hz = /bits/ 64 <1176000000>;
+			opp-microvolt = <1160000 885000 1160000>;
+			opp-supported-hw = <0xFF 0x02>;
+		};
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -95,10 +139,10 @@
 		compatible = "ti,dra7-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x0 0x0 0xc0000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x44000000 0x1000000>,
-		      <0x45000000 0x1000>;
+		reg = <0x0 0x44000000 0x0 0x1000000>,
+		      <0x0 0x45000000 0x0 0x1000>;
 		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -120,9 +164,10 @@
 					reg = <0x0 0x1400>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0x0 0x1400>;
 
-					pbias_regulator: pbias_regulator {
-						compatible = "ti,pbias-omap";
+					pbias_regulator: pbias_regulator@e00 {
+						compatible = "ti,pbias-dra7", "ti,pbias-omap";
 						reg = <0xe00 0x4>;
 						syscon = <&scm_conf>;
 						pbias_mmc_reg: pbias_mmc_omap5 {
@@ -141,7 +186,7 @@
 				dra7_pmx_core: pinmux@1400 {
 					compatible = "ti,dra7-padconf",
 						     "pinctrl-single";
-					reg = <0x1400 0x0464>;
+					reg = <0x1400 0x0468>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#interrupt-cells = <1>;
@@ -149,6 +194,34 @@
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x3fffffff>;
 				};
+
+				scm_conf1: scm_conf@1c04 {
+					compatible = "syscon";
+					reg = <0x1c04 0x0020>;
+				};
+
+				scm_conf_pcie: scm_conf@1c24 {
+					compatible = "syscon";
+					reg = <0x1c24 0x0024>;
+				};
+
+				sdma_xbar: dma-router@b78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xb78 0xfc>;
+					#dma-cells = <1>;
+					dma-requests = <205>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&sdma>;
+				};
+
+				edma_xbar: dma-router@c78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xc78 0x7c>;
+					#dma-cells = <2>;
+					dma-requests = <204>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&edma>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
@@ -203,6 +276,11 @@
 				prm_clockdomains: clockdomains {
 				};
 			};
+
+			scm_wkup: scm_conf@c000 {
+				compatible = "syscon";
+				reg = <0xc000 0x1000>;
+			};
 		};
 
 		axi@0 {
@@ -211,7 +289,7 @@
 			#address-cells = <1>;
 			ranges = <0x51000000 0x51000000 0x3000
 				  0x0	     0x20000000 0x10000000>;
-			pcie@51000000 {
+			pcie1: pcie@51000000 {
 				compatible = "ti,dra7-pcie";
 				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
@@ -246,7 +324,7 @@
 			ranges = <0x51800000 0x51800000 0x3000
 				  0x0	     0x30000000 0x10000000>;
 			status = "disabled";
-			pcie@51000000 {
+			pcie@51800000 {
 				compatible = "ti,dra7-pcie";
 				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
@@ -274,6 +352,53 @@
 			};
 		};
 
+		ocmcram1: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x80000>;
+			ranges = <0x0 0x40300000 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * This is a placeholder for an optional reserved
+			 * region for use by secure software. The size
+			 * of this region is not known until runtime so it
+			 * is set as zero to either be updated to reserve
+			 * space or left unchanged to leave all SRAM for use.
+			 * On HS parts that that require the reserved region
+			 * either the bootloader can update the size to
+			 * the required amount or the node can be overridden
+			 * from the board dts file for the secure platform.
+			 */
+			sram-hs@0 {
+				compatible = "ti,secure-ram";
+				reg = <0x0 0x0>;
+			};
+		};
+
+		/*
+		 * NOTE: ocmcram2 and ocmcram3 are not available on all
+		 * DRA7xx and AM57xx variants. Confirm availability in
+		 * the data manual for the exact part number in use
+		 * before enabling these nodes in the board dts file.
+		 */
+		ocmcram2: ocmcram@40400000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40400000 0x100000>;
+			ranges = <0x0 0x40400000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		ocmcram3: ocmcram@40500000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40500000 0x100000>;
+			ranges = <0x0 0x40500000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		bandgap: bandgap@4a0021e0 {
 			reg = <0x4a0021e0 0xc
 				0x4a00232c 0xc
@@ -286,14 +411,9 @@
 				#thermal-sensor-cells = <1>;
 		};
 
-		dra7_ctrl_core: ctrl_core@4a002000 {
+		dsp1_system: dsp_system@40d00000 {
 			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
-		};
-
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
+			reg = <0x40d00000 0x100>;
 		};
 
 		sdma: dma-controller@4a056000 {
@@ -308,6 +428,45 @@
 			dma-requests = <127>;
 		};
 
+		edma: edma@43300000 {
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg = <0x43300000 0x100000>;
+			reg-names = "edma3_cc";
+			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_ccint", "edma3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+			/*
+			 * memcpy is disabled, can be enabled with:
+			 * ti,edma-memcpy-channels = <20 21>;
+			 * for example. Note that these channels need to be
+			 * masked in the xbar as well.
+			 */
+		};
+
+		edma_tptc0: tptc@43400000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x43400000 0x100000>;
+			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@43500000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x43500000 0x100000>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
@@ -397,73 +556,73 @@
 		};
 
 		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x4806a000 0x100>;
 			interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 49>, <&sdma 50>;
+			dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
 			dma-names = "tx", "rx";
 		};
 
 		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x4806c000 0x100>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 51>, <&sdma 52>;
+			dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
 			dma-names = "tx", "rx";
 		};
 
 		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48020000 0x100>;
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 53>, <&sdma 54>;
+			dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
 			dma-names = "tx", "rx";
 		};
 
 		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x4806e000 0x100>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
                         status = "disabled";
-			dmas = <&sdma 55>, <&sdma 56>;
+			dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
 			dma-names = "tx", "rx";
 		};
 
 		uart5: serial@48066000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48066000 0x100>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 63>, <&sdma 64>;
+			dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
 			dma-names = "tx", "rx";
 		};
 
 		uart6: serial@48068000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48068000 0x100>;
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 79>, <&sdma 80>;
+			dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
 			dma-names = "tx", "rx";
 		};
 
 		uart7: serial@48420000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48420000 0x100>;
 			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart7";
@@ -472,7 +631,7 @@
 		};
 
 		uart8: serial@48422000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48422000 0x100>;
 			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart8";
@@ -481,7 +640,7 @@
 		};
 
 		uart9: serial@48424000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48424000 0x100>;
 			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart9";
@@ -490,7 +649,7 @@
 		};
 
 		uart10: serial@4ae2b000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x4ae2b000 0x100>;
 			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart10";
@@ -757,12 +916,20 @@
 			ti,hwmods = "timer11";
 		};
 
+		timer12: timer@4ae20000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae20000 0x80>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
+
 		timer13: timer@48828000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48828000 0x80>;
 			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer13";
-			status = "disabled";
 		};
 
 		timer14: timer@4882a000 {
@@ -770,7 +937,6 @@
 			reg = <0x4882a000 0x80>;
 			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer14";
-			status = "disabled";
 		};
 
 		timer15: timer@4882c000 {
@@ -778,7 +944,6 @@
 			reg = <0x4882c000 0x80>;
 			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer15";
-			status = "disabled";
 		};
 
 		timer16: timer@4882e000 {
@@ -786,7 +951,6 @@
 			reg = <0x4882e000 0x80>;
 			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer16";
-			status = "disabled";
 		};
 
 		wdt2: wdt@4ae14000 {
@@ -867,7 +1031,7 @@
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
+			dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 			pbias-supply = <&pbias_mmc_reg>;
@@ -879,7 +1043,7 @@
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
+			dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -890,7 +1054,7 @@
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
+			dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -901,11 +1065,51 @@
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
+			dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
+		mmu0_dsp1: mmu@40d01000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d01000 0x100>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu0_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			status = "disabled";
+		};
+
+		mmu1_dsp1: mmu@40d02000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d02000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu1_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			status = "disabled";
+		};
+
+		mmu_ipu1: mmu@58882000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x58882000 0x100>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu1";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
+		mmu_ipu2: mmu@55082000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu2";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
 		abb_mpu: regulator-abb-mpu {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_mpu";
@@ -1046,14 +1250,14 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
 			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
+			dmas = <&sdma_xbar 35>,
+			       <&sdma_xbar 36>,
+			       <&sdma_xbar 37>,
+			       <&sdma_xbar 38>,
+			       <&sdma_xbar 39>,
+			       <&sdma_xbar 40>,
+			       <&sdma_xbar 41>,
+			       <&sdma_xbar 42>;
 			dma-names = "tx0", "rx0", "tx1", "rx1",
 				    "tx2", "rx2", "tx3", "rx3";
 			status = "disabled";
@@ -1067,10 +1271,10 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
+			dmas = <&sdma_xbar 43>,
+			       <&sdma_xbar 44>,
+			       <&sdma_xbar 45>,
+			       <&sdma_xbar 46>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -1083,7 +1287,7 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
+			dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
@@ -1096,15 +1300,17 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
 			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
+			dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
 
 		qspi: qspi@4b300000 {
 			compatible = "ti,dra7xxx-qspi";
-			reg = <0x4b300000 0x100>;
-			reg-names = "qspi_base";
+			reg = <0x4b300000 0x100>,
+			      <0x5c000000 0x4000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			syscon-chipselects = <&scm_conf 0x558>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "qspi";
@@ -1115,14 +1321,6 @@
 			status = "disabled";
 		};
 
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
 		/* OCP2SCP3 */
 		ocp2scp@4a090000 {
 			compatible = "ti,omap-ocp2scp";
@@ -1137,7 +1335,7 @@
 				      <0x4A096400 0x64>, /* phy_tx */
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
+				syscon-phy-power = <&scm_conf 0x374>;
 				clocks = <&sys_clkin1>, <&sata_ref_clk>;
 				clock-names = "sysclk", "refclk";
 				syscon-pllreset = <&scm_conf 0x3fc>;
@@ -1149,16 +1347,18 @@
 				reg = <0x4a094000 0x80>, /* phy_rx */
 				      <0x4a094400 0x64>; /* phy_tx */
 				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie1phy>;
+				syscon-phy-power = <&scm_conf_pcie 0x1c>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
 					 <&optfclk_pciephy1_32khz>,
 					 <&optfclk_pciephy1_clk>,
 					 <&optfclk_pciephy1_div_clk>,
-					 <&optfclk_pciephy_div>;
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
 					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
+					      "div-clk", "phy-div", "sysclk";
 				#phy-cells = <0>;
 			};
 
@@ -1167,16 +1367,18 @@
 				reg = <0x4a095000 0x80>, /* phy_rx */
 				      <0x4a095400 0x64>; /* phy_tx */
 				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie2phy>;
+				syscon-phy-power = <&scm_conf_pcie 0x20>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
 					 <&optfclk_pciephy2_32khz>,
 					 <&optfclk_pciephy2_clk>,
 					 <&optfclk_pciephy2_div_clk>,
-					 <&optfclk_pciephy_div>;
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
 					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
+					      "div-clk", "phy-div", "sysclk";
 				#phy-cells = <0>;
 				status = "disabled";
 			};
@@ -1192,23 +1394,6 @@
 			ti,hwmods = "sata";
 		};
 
-		omap_control_pcie1phy: control-phy@0x4a003c40 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		omap_control_pcie2phy: control-pcie@0x4a003c44 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-			status = "disabled";
-		};
-
 		rtc: rtc@48838000 {
 			compatible = "ti,am3352-rtc";
 			reg = <0x48838000 0x100>;
@@ -1218,24 +1403,6 @@
 			clocks = <&sys_32k_ck>;
 		};
 
-		omap_control_usb2phy1: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy1: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb2phy2: control-phy@0x4a002e74 {
-			compatible = "ti,control-phy-usb2-dra7";
-			reg = <0x4a002e74 0x4>;
-			reg-names = "power";
-		};
-
 		/* OCP2SCP1 */
 		ocp2scp@4a080000 {
 			compatible = "ti,omap-ocp2scp";
@@ -1248,7 +1415,7 @@
 			usb2_phy1: phy@4a084000 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x400>;
-				ctrl-module = <&omap_control_usb2phy1>;
+				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy1_always_on_clk32k>,
 					 <&usb_otg_ss1_refclk960m>;
 				clock-names =	"wkupclk",
@@ -1257,9 +1424,10 @@
 			};
 
 			usb2_phy2: phy@4a085000 {
-				compatible = "ti,omap-usb2";
+				compatible = "ti,dra7x-usb2-phy2",
+					     "ti,omap-usb2";
 				reg = <0x4a085000 0x400>;
-				ctrl-module = <&omap_control_usb2phy2>;
+				syscon-phy-power = <&scm_conf 0xe74>;
 				clocks = <&usb_phy2_always_on_clk32k>,
 					 <&usb_otg_ss2_refclk960m>;
 				clock-names =	"wkupclk",
@@ -1273,7 +1441,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy1>;
+				syscon-phy-power = <&scm_conf 0x370>;
 				clocks = <&usb_phy3_always_on_clk32k>,
 					 <&sys_clkin1>,
 					 <&usb_otg_ss1_refclk960m>;
@@ -1296,10 +1464,14 @@
 			usb1: usb@48890000 {
 				compatible = "snps,dwc3";
 				reg = <0x48890000 0x17000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
-				tx-fifo-resize;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
 				snps,dis_u3_susphy_quirk;
@@ -1319,10 +1491,14 @@
 			usb2: usb@488d0000 {
 				compatible = "snps,dwc3";
 				reg = <0x488d0000 0x17000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
-				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
 				snps,dis_u3_susphy_quirk;
@@ -1344,8 +1520,12 @@
 			usb3: usb@48910000 {
 				compatible = "snps,dwc3";
 				reg = <0x48910000 0x17000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				tx-fifo-resize;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
 				snps,dis_u3_susphy_quirk;
@@ -1366,10 +1546,16 @@
 			ti,hwmods = "gpmc";
 			reg = <0x50000000 0x37c>;      /* device IO registers */
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 4 0>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 			status = "disabled";
 		};
 
@@ -1384,6 +1570,136 @@
 			status = "disabled";
 		};
 
+		mcasp1: mcasp@48460000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x48460000 0x2000>,
+			      <0x45800000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
+				 <&mcasp1_ahclkr_mux>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			status = "disabled";
+		};
+
+		mcasp2: mcasp@48464000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp2";
+			reg = <0x48464000 0x2000>,
+			      <0x45c00000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
+				 <&mcasp2_ahclkr_mux>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			status = "disabled";
+		};
+
+		mcasp3: mcasp@48468000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp3";
+			reg = <0x48468000 0x2000>,
+			      <0x46000000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp4: mcasp@4846c000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp4";
+			reg = <0x4846c000 0x2000>,
+			      <0x48436000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp5: mcasp@48470000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp5";
+			reg = <0x48470000 0x2000>,
+			      <0x4843a000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp6: mcasp@48474000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp6";
+			reg = <0x48474000 0x2000>,
+			      <0x4844c000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp7: mcasp@48478000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp7";
+			reg = <0x48478000 0x2000>,
+			      <0x48450000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp8: mcasp@4847c000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp8";
+			reg = <0x4847c000 0x2000>,
+			      <0x48454000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
@@ -1398,8 +1714,8 @@
 			ti,irqs-safe-map = <0>;
 		};
 
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
+		mac: ethernet@48484000 {
+			compatible = "ti,dra7-cpsw","ti,cpsw";
 			ti,hwmods = "gmac";
 			clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
 			clock-names = "fck", "cpts";
@@ -1407,7 +1723,6 @@
 			ale_entries = <1024>;
 			bd_ram_size = <0x2000>;
 			no_bd_ram = <0>;
-			rx_descs = <64>;
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
@@ -1417,6 +1732,16 @@
 			       0x48485200 0x2E00>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			/*
+			 * Do not allow gating of cpsw clock as workaround
+			 * for errata i877. Keeping internal clock disabled
+			 * causes the device switching characteristics
+			 * to degrade over time and eventually fail to meet
+			 * the data manual delay time/skew specs.
+			 */
+			ti,no-idle;
+
 			/*
 			 * rx_thresh_pend
 			 * rx_pend
@@ -1428,10 +1753,11 @@
 				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 			ranges;
+			syscon = <&scm_conf>;
 			status = "disabled";
 
 			davinci_mdio: mdio@48485000 {
-				compatible = "ti,davinci_mdio";
+				compatible = "ti,cpsw-mdio","ti,davinci_mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				ti,hwmods = "davinci_mdio";
@@ -1513,12 +1839,157 @@
 				clock-names = "fck", "sys_clk";
 			};
 		};
+
+		epwmss0: epwmss@4843e000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x4843e000 0x30>;
+			ti,hwmods = "epwmss0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm0: pwm@4843e200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x4843e200 0x80>;
+				clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap0: ecap@4843e100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x4843e100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48440000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48440000 0x30>;
+			ti,hwmods = "epwmss1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm1: pwm@48440200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48440200 0x80>;
+				clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap1: ecap@48440100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48440100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48442000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48442000 0x30>;
+			ti,hwmods = "epwmss2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm2: pwm@48442200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48442200 0x80>;
+				clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap2: ecap@48442100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48442100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		aes1: aes@4b500000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes1";
+			reg = <0x4b500000 0xa0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		aes2: aes@4b700000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes2";
+			reg = <0x4b700000 0xa0>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		des: des@480a5000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x480a5000 0xa0>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x4b101000 0x300>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 119 0>;
+			dma-names = "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		rng: rng@48090000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48090000 0x2000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
 	};
 
 	thermal_zones: thermal-zones {
 		#include "omap4-cpu-thermal.dtsi"
 		#include "omap5-gpu-thermal.dtsi"
 		#include "omap5-core-thermal.dtsi"
+		#include "dra7-dspeve-thermal.dtsi"
+		#include "dra7-iva-thermal.dtsi"
 	};
 
 };
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
new file mode 100644
index 000000000..9d3cf50ca
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -0,0 +1,817 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+
+/ {
+	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	evm_3v3_sw: fixedregulator-evm_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	evm_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
+			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+};
+
+&dra7_pmx_core {
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+		>;
+	};
+
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+		>;
+	};
+
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+		>;
+	};
+
+	nand_default: nand_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
+			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
+			DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
+			DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
+			DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
+			DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
+			DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
+			DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
+			DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
+			DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
+			DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
+			DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
+			DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
+			DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
+			DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
+			DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
+			DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
+			DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+			DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+			DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+			DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
+			DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+		>;
+	};
+
+	usb2_pins: pinmux_usb2_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+		>;
+	};
+
+	tps65917_pins_default: tps65917_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+		>;
+	};
+
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+		>;
+	};
+
+	hdmi_pins: pinmux_hdmi_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+		>;
+	};
+
+	atl_pins: pinmux_atl_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
+			DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
+		>;
+	};
+
+	mcasp3_pins: pinmux_mcasp3_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	tps65917: tps65917@58 {
+		compatible = "ti,tps65917";
+		reg = <0x58>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps65917_pins_default>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		ti,system-power-controller;
+
+		tps65917_pmic {
+			compatible = "ti,tps65917-pmic";
+
+			tps65917_regulators: regulators {
+				smps1_reg: smps1 {
+					/* VDD_MPU */
+					regulator-name = "smps1";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps2_reg: smps2 {
+					/* VDD_CORE */
+					regulator-name = "smps2";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_GPU IVA DSPEVE */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				smps4_reg: smps4 {
+					/* VDDS1V8 */
+					regulator-name = "smps4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps5_reg: smps5 {
+					/* VDD_DDR */
+					regulator-name = "smps5";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> SDIO  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-allow-bypass;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHY */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		tps65917_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps65917>;
+			interrupts = <1 IRQ_TYPE_NONE>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <6>;
+		};
+	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+
+	pcf_hdmi: pcf8575@26 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * initial state is used here to keep the mdio interface
+		 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
+		 * VIN2_S0 driven high otherwise Ethernet stops working
+		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
+		 */
+		lines-initial-states = <0x0f2b>;
+
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_default>;
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		/* To use NAND, DIP switch SW5 must be set like so:
+		 * SW5.1 (NAND_SELn) = ON (LOW)
+		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
+		 */
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <80>;
+		gpmc,cs-wr-off-ns = <80>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <60>;
+		gpmc,adv-wr-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <50>;
+		gpmc,oe-on-ns = <4>;
+		gpmc,oe-off-ns = <40>;
+		gpmc,access-ns = <40>;
+		gpmc,wr-access-ns = <80>;
+		gpmc,rd-cycle-ns = <80>;
+		gpmc,wr-cycle-ns = <80>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+	vmmc-supply = <&evm_3v3_sd>;
+	vmmc_aux-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is a viable alternative
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	max-frequency = <192000000>;
+};
+
+&mmc2 {
+	/* SW5-3 in ON position */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&evm_3v3_sw>;
+	bus-width = <8>;
+	ti,non-removable;
+	max-frequency = <192000000>;
+};
+
+&dra7_pmx_core {
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 2 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+		>;
+
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 2 */
+			DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
+		>;
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
+&dcan1 {
+	status = "ok";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <64000000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <64000000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&atl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&atl_pins>;
+
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_gfclk_mux>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins>;
+	pinctrl-1 = <&mcasp3_sleep_pins>;
+
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
new file mode 100644
index 000000000..f9cfd3bb4
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "dra72-evm-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "TI DRA722 Rev C EVM";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+};
+
+&tps65917_regulators {
+	ldo2_reg: ldo2 {
+		/* LDO2_OUT --> VDDA_1V8_PHY2 */
+		regulator-name = "ldo2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hdmi {
+	vdda-supply = <&ldo2_reg>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio3>;
+	interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&mac {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <3>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 803738414..cc1d32ca4 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -1,679 +1,45 @@
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-/dts-v1/;
-
-#include "dra72x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
+#include "dra72-evm-common.dtsi"
 / {
 	model = "TI DRA722";
-	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1024 MB */
-	};
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	evm_3v3: fixedregulator-evm_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
-			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-};
-
-&dra7_pmx_core {
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
-			0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
-		>;
-	};
-
-	nand_default: nand_default {
-		pinctrl-single,pins = <
-			0x0	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
-			0x4	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
-			0x8	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
-			0xc	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
-			0x10	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
-			0x14	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
-			0x18	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
-			0x1c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
-			0x20	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
-			0x24	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
-			0x28	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
-			0x2c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
-			0x30	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
-			0x34	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
-			0x38	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
-			0x3c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
-			0xb4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
-			0xc4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
-			0xcc	(PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
-			0xc8	(PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
-			0xd0	(PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
-			0xd8	(PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-		>;
-	};
-
-	usb2_pins: pinmux_usb2_pins {
-		pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
-		>;
-	};
-
-	tps65917_pins_default: tps65917_pins_default {
-		pinctrl-single,pins = <
-			0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
-		>;
-	};
-
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x418   (PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
-		>;
-	};
-
-	dcan1_pins_sleep: dcan1_pins_sleep {
-		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
-		>;
-	};
-
-	qspi1_pins: pinmux_qspi1_pins {
-		pinctrl-single,pins = <
-			0x74 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)	/* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)	/* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_OUTPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
-		>;
-	};
-
-	hdmi_pins: pinmux_hdmi_pins {
-		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
-			0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
-	tps65917: tps65917@58 {
-		compatible = "ti,tps65917";
-		reg = <0x58>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps65917_pins_default>;
-
-		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		ti,system-power-controller;
-
-		tps65917_pmic {
-			compatible = "ti,tps65917-pmic";
-
-			regulators {
-				smps1_reg: smps1 {
-					/* VDD_MPU */
-					regulator-name = "smps1";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps2_reg: smps2 {
-					/* VDD_CORE */
-					regulator-name = "smps2";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1060000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_GPU IVA DSPEVE */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				smps4_reg: smps4 {
-					/* VDDS1V8 */
-					regulator-name = "smps4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps5_reg: smps5 {
-					/* VDD_DDR */
-					regulator-name = "smps5";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* LDO1_OUT --> SDIO  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* LDO2_OUT --> TP1017 (UNUSED)  */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-			};
-		};
-
-		tps65917_power_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps65917>;
-			interrupts = <1 IRQ_TYPE_NONE>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <6>;
-		};
-	};
-
-	pcf_gpio_21: gpio@21 {
-		compatible = "ti,pcf8575";
-		reg = <0x21>;
-		lines-initial-states = <0x1408>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
-	clock-frequency = <400000>;
-
-	pcf_hdmi: pcf8575@26 {
-		compatible = "nxp,pcf8575";
-		reg = <0x26>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		/*
-		 * initial state is used here to keep the mdio interface
-		 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
-		 * VIN2_S0 driven high otherwise Ethernet stops working
-		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
-		 */
-		lines-initial-states = <0x0f2b>;
+		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
 	};
 };
 
-&uart1 {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_default>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		/* To use NAND, DIP switch SW5 must be set like so:
-		 * SW5.1 (NAND_SELn) = ON (LOW)
-		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
-		 */
-		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <80>;
-		gpmc,cs-wr-off-ns = <80>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <60>;
-		gpmc,adv-wr-off-ns = <60>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <50>;
-		gpmc,oe-on-ns = <4>;
-		gpmc,oe-off-ns = <40>;
-		gpmc,access-ns = <40>;
-		gpmc,wr-access-ns = <80>;
-		gpmc,rd-cycle-ns = <80>;
-		gpmc,wr-cycle-ns = <80>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000c0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001c0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001e0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x0f600000>;
-		};
+&tps65917_regulators {
+	ldo2_reg: ldo2 {
+		/* LDO2_OUT --> TP1017 (UNUSED)  */
+		regulator-name = "ldo2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-allow-bypass;
 	};
 };
 
-&usb2_phy1 {
-	phy-supply = <&ldo4_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldo4_reg>;
-};
-
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&usb2 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_pins>;
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-
-	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	/*
-	 * SDCD signal is not being used here - using the fact that GPIO mode
-	 * is a viable alternative
-	 */
-	cd-gpios = <&gpio6 27 0>;
-};
-
-&mmc2 {
-	/* SW5-3 in ON position */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&evm_3v3>;
-	bus-width = <8>;
-	ti,non-removable;
+&hdmi {
+	vdda-supply = <&ldo3_reg>;
 };
 
-&dra7_pmx_core {
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
-		>;
-
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 2 */
-			0x198 (MUX_MODE15)
-			0x19c (MUX_MODE15)
-			0x1a0 (MUX_MODE15)
-			0x1a4 (MUX_MODE15)
-			0x1a8 (MUX_MODE15)
-			0x1ac (MUX_MODE15)
-			0x1b0 (MUX_MODE15)
-			0x1b4 (MUX_MODE15)
-			0x1b8 (MUX_MODE15)
-			0x1bc (MUX_MODE15)
-			0x1c0 (MUX_MODE15)
-			0x1c4 (MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			0x23c (MUX_MODE15)
-			0x240 (MUX_MODE15)
-		>;
-	};
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio6>;
+	interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 };
 
 &mac {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
+	slaves = <1>;
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
 };
 
-&cpsw_emac1 {
+&cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <3>;
 	phy-mode = "rgmii";
 };
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	active_slave = <1>;
-};
-
-&dcan1 {
-	status = "ok";
-	pinctrl-names = "default", "sleep", "active";
-	pinctrl-0 = <&dcan1_pins_sleep>;
-	pinctrl-1 = <&dcan1_pins_sleep>;
-	pinctrl-2 = <&dcan1_pins_default>;
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_pins>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "s25fl256s1";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
-		};
-		partition@1 {
-			label = "QSPI.SPL.backup1";
-			reg = <0x00010000 0x00010000>;
-		};
-		partition@2 {
-			label = "QSPI.SPL.backup2";
-			reg = <0x00020000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.SPL.backup3";
-			reg = <0x00030000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00080000>;
-		};
-		partition@6 {
-			label = "QSPI.u-boot-env";
-			reg = <0x001c0000 0x00010000>;
-		};
-		partition@7 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x001d0000 0x0010000>;
-		};
-		partition@8 {
-			label = "QSPI.kernel";
-			reg = <0x001e0000 0x0800000>;
-		};
-		partition@9 {
-			label = "QSPI.file-system";
-			reg = <0x009e0000 0x01620000>;
-		};
-	};
-};
-
-&dss {
-	status = "ok";
-
-	vdda_video-supply = <&ldo5_reg>;
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo3_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index eaca143fa..67107605f 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -12,22 +12,6 @@
 / {
 	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
 		interrupt-parent = <&wakeupgen>;
@@ -45,3 +29,24 @@
 		 <&dss_video1_clk>;
 	clock-names = "fck", "video1_clk";
 };
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index fa995d0ca..8987b3e18 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -13,34 +13,11 @@
 	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000	1060000
-				1176000	1160000
-				>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};
 
@@ -52,6 +29,11 @@
 	};
 
 	ocp {
+		dsp2_system: dsp_system@41500000 {
+			compatible = "syscon";
+			reg = <0x41500000 0x100>;
+		};
+
 		omap_dwc3_4: omap_dwc3_4@48940000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss4";
@@ -65,12 +47,36 @@
 			usb4: usb@48950000 {
 				compatible = "snps,dwc3";
 				reg = <0x48950000 0x17000>;
-				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-				tx-fifo-resize;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
 			};
 		};
+
+		mmu0_dsp2: mmu@41501000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x41501000 0x100>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu0_dsp2";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+			status = "disabled";
+		};
+
+		mmu1_dsp2: mmu@41502000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x41502000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu1_dsp2";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+			status = "disabled";
+		};
 	};
 };
 
@@ -78,8 +84,8 @@
 	reg = <0x58000000 0x80>,
 	      <0x58004054 0x4>,
 	      <0x58004300 0x20>,
-	      <0x58005054 0x4>,
-	      <0x58005300 0x20>;
+	      <0x58009054 0x4>,
+	      <0x58009300 0x20>;
 	reg-names = "dss", "pll1_clkctrl", "pll1",
 		    "pll2_clkctrl", "pll2";
 
@@ -88,3 +94,29 @@
 		 <&dss_video2_clk>;
 	clock-names = "fck", "video1_clk", "video2_clk";
 };
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 357bedeeb..8378b44ee 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -98,12 +98,20 @@
 		clock-frequency = <32768>;
 	};
 
-	sys_32k_ck: sys_32k_ck {
+	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
+	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <610>;
+	};
+
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -188,7 +196,7 @@
 		clock-frequency = <0>;
 	};
 
-	dpll_abe_ck: dpll_abe_ck {
+	dpll_abe_ck: dpll_abe_ck@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
 		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
@@ -201,7 +209,7 @@
 		clocks = <&dpll_abe_ck>;
 	};
 
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_x2_ck>;
@@ -212,7 +220,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	abe_clk: abe_clk {
+	abe_clk: abe_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_m2x2_ck>;
@@ -221,7 +229,7 @@
 		ti,index-power-of-two;
 	};
 
-	dpll_abe_m2_ck: dpll_abe_m2_ck {
+	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_ck>;
@@ -232,7 +240,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_x2_ck>;
@@ -243,7 +251,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_byp_mux: dpll_core_byp_mux {
+	dpll_core_byp_mux: dpll_core_byp_mux@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
@@ -251,7 +259,7 @@
 		reg = <0x012c>;
 	};
 
-	dpll_core_ck: dpll_core_ck {
+	dpll_core_ck: dpll_core_ck@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
 		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
@@ -264,7 +272,7 @@
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -283,14 +291,14 @@
 		clock-div = <1>;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck {
+	dpll_mpu_ck: dpll_mpu_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap5-mpu-dpll-clock";
 		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_mpu_ck>;
@@ -317,7 +325,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_dsp_byp_mux: dpll_dsp_byp_mux {
+	dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
@@ -325,14 +333,14 @@
 		reg = <0x0240>;
 	};
 
-	dpll_dsp_ck: dpll_dsp_ck {
+	dpll_dsp_ck: dpll_dsp_ck@234 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
 		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
 	};
 
-	dpll_dsp_m2_ck: dpll_dsp_m2_ck {
+	dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_dsp_ck>;
@@ -351,7 +359,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_iva_byp_mux: dpll_iva_byp_mux {
+	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
@@ -359,14 +367,14 @@
 		reg = <0x01ac>;
 	};
 
-	dpll_iva_ck: dpll_iva_ck {
+	dpll_iva_ck: dpll_iva_ck@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 	};
 
-	dpll_iva_m2_ck: dpll_iva_m2_ck {
+	dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_iva_ck>;
@@ -385,7 +393,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_gpu_byp_mux: dpll_gpu_byp_mux {
+	dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
@@ -393,14 +401,14 @@
 		reg = <0x02e4>;
 	};
 
-	dpll_gpu_ck: dpll_gpu_ck {
+	dpll_gpu_ck: dpll_gpu_ck@2d8 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
 		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
 	};
 
-	dpll_gpu_m2_ck: dpll_gpu_m2_ck {
+	dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_gpu_ck>;
@@ -411,7 +419,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m2_ck: dpll_core_m2_ck {
+	dpll_core_m2_ck: dpll_core_m2_ck@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_ck>;
@@ -430,7 +438,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_ddr_byp_mux: dpll_ddr_byp_mux {
+	dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
@@ -438,14 +446,14 @@
 		reg = <0x021c>;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck {
+	dpll_ddr_ck: dpll_ddr_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
 		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_ddr_ck>;
@@ -456,7 +464,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_byp_mux: dpll_gmac_byp_mux {
+	dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
@@ -464,14 +472,14 @@
 		reg = <0x02b4>;
 	};
 
-	dpll_gmac_ck: dpll_gmac_ck {
+	dpll_gmac_ck: dpll_gmac_ck@2a8 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
 		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
 	};
 
-	dpll_gmac_m2_ck: dpll_gmac_m2_ck {
+	dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_gmac_ck>;
@@ -530,7 +538,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_eve_byp_mux: dpll_eve_byp_mux {
+	dpll_eve_byp_mux: dpll_eve_byp_mux@290 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
@@ -538,14 +546,14 @@
 		reg = <0x0290>;
 	};
 
-	dpll_eve_ck: dpll_eve_ck {
+	dpll_eve_ck: dpll_eve_ck@284 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
 		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
 	};
 
-	dpll_eve_m2_ck: dpll_eve_m2_ck {
+	dpll_eve_m2_ck: dpll_eve_m2_ck@294 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_eve_ck>;
@@ -564,7 +572,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -575,7 +583,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -586,7 +594,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -597,7 +605,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -608,7 +616,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -625,7 +633,7 @@
 		clocks = <&dpll_ddr_ck>;
 	};
 
-	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck {
+	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_ddr_x2_ck>;
@@ -642,7 +650,7 @@
 		clocks = <&dpll_dsp_ck>;
 	};
 
-	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck {
+	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_dsp_x2_ck>;
@@ -659,7 +667,7 @@
 		clocks = <&dpll_gmac_ck>;
 	};
 
-	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck {
+	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_gmac_x2_ck>;
@@ -670,7 +678,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck {
+	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_gmac_x2_ck>;
@@ -681,7 +689,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck {
+	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_gmac_x2_ck>;
@@ -692,7 +700,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck {
+	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_gmac_x2_ck>;
@@ -727,7 +735,7 @@
 		clock-div = <1>;
 	};
 
-	l3_iclk_div: l3_iclk_div {
+	l3_iclk_div: l3_iclk_div@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		ti,max-div = <2>;
@@ -777,7 +785,7 @@
 		clock-div = <1>;
 	};
 
-	ipu1_gfclk_mux: ipu1_gfclk_mux {
+	ipu1_gfclk_mux: ipu1_gfclk_mux@520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
@@ -785,7 +793,7 @@
 		reg = <0x0520>;
 	};
 
-	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux {
+	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -793,7 +801,7 @@
 		reg = <0x0550>;
 	};
 
-	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux {
+	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux@550 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -801,7 +809,7 @@
 		reg = <0x0550>;
 	};
 
-	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux {
+	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux@550 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
@@ -809,7 +817,7 @@
 		reg = <0x0550>;
 	};
 
-	timer5_gfclk_mux: timer5_gfclk_mux {
+	timer5_gfclk_mux: timer5_gfclk_mux@558 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
@@ -817,7 +825,7 @@
 		reg = <0x0558>;
 	};
 
-	timer6_gfclk_mux: timer6_gfclk_mux {
+	timer6_gfclk_mux: timer6_gfclk_mux@560 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
@@ -825,7 +833,7 @@
 		reg = <0x0560>;
 	};
 
-	timer7_gfclk_mux: timer7_gfclk_mux {
+	timer7_gfclk_mux: timer7_gfclk_mux@568 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
@@ -833,7 +841,7 @@
 		reg = <0x0568>;
 	};
 
-	timer8_gfclk_mux: timer8_gfclk_mux {
+	timer8_gfclk_mux: timer8_gfclk_mux@570 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
@@ -841,7 +849,7 @@
 		reg = <0x0570>;
 	};
 
-	uart6_gfclk_mux: uart6_gfclk_mux {
+	uart6_gfclk_mux: uart6_gfclk_mux@580 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -856,7 +864,7 @@
 	};
 };
 &prm_clocks {
-	sys_clkin1: sys_clkin1 {
+	sys_clkin1: sys_clkin1@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
@@ -864,28 +872,28 @@
 		ti,index-starts-at-one;
 	};
 
-	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux {
+	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0118>;
 	};
 
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
 		reg = <0x0114>;
 	};
 
-	abe_dpll_clk_mux: abe_dpll_clk_mux {
+	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
 		reg = <0x010c>;
 	};
 
-	abe_24m_fclk: abe_24m_fclk {
+	abe_24m_fclk: abe_24m_fclk@11c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_m2x2_ck>;
@@ -893,7 +901,7 @@
 		ti,dividers = <8>, <16>;
 	};
 
-	aess_fclk: aess_fclk {
+	aess_fclk: aess_fclk@178 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&abe_clk>;
@@ -901,7 +909,7 @@
 		ti,max-div = <2>;
 	};
 
-	abe_giclk_div: abe_giclk_div {
+	abe_giclk_div: abe_giclk_div@174 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&aess_fclk>;
@@ -909,7 +917,7 @@
 		ti,max-div = <2>;
 	};
 
-	abe_lp_clk_div: abe_lp_clk_div {
+	abe_lp_clk_div: abe_lp_clk_div@1d8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_m2x2_ck>;
@@ -917,7 +925,7 @@
 		ti,dividers = <16>, <32>;
 	};
 
-	abe_sys_clk_div: abe_sys_clk_div {
+	abe_sys_clk_div: abe_sys_clk_div@120 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkin1>;
@@ -925,14 +933,14 @@
 		ti,max-div = <2>;
 	};
 
-	adc_gfclk_mux: adc_gfclk_mux {
+	adc_gfclk_mux: adc_gfclk_mux@1dc {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
 		reg = <0x01dc>;
 	};
 
-	sys_clk1_dclk_div: sys_clk1_dclk_div {
+	sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkin1>;
@@ -941,7 +949,7 @@
 		ti,index-power-of-two;
 	};
 
-	sys_clk2_dclk_div: sys_clk2_dclk_div {
+	sys_clk2_dclk_div: sys_clk2_dclk_div@1cc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkin2>;
@@ -950,7 +958,7 @@
 		ti,index-power-of-two;
 	};
 
-	per_abe_x1_dclk_div: per_abe_x1_dclk_div {
+	per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_m2_ck>;
@@ -959,7 +967,7 @@
 		ti,index-power-of-two;
 	};
 
-	dsp_gclk_div: dsp_gclk_div {
+	dsp_gclk_div: dsp_gclk_div@18c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_dsp_m2_ck>;
@@ -968,7 +976,7 @@
 		ti,index-power-of-two;
 	};
 
-	gpu_dclk: gpu_dclk {
+	gpu_dclk: gpu_dclk@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_gpu_m2_ck>;
@@ -977,7 +985,7 @@
 		ti,index-power-of-two;
 	};
 
-	emif_phy_dclk_div: emif_phy_dclk_div {
+	emif_phy_dclk_div: emif_phy_dclk_div@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_ddr_m2_ck>;
@@ -986,7 +994,7 @@
 		ti,index-power-of-two;
 	};
 
-	gmac_250m_dclk_div: gmac_250m_dclk_div {
+	gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_gmac_m2_ck>;
@@ -995,7 +1003,7 @@
 		ti,index-power-of-two;
 	};
 
-	l3init_480m_dclk_div: l3init_480m_dclk_div {
+	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_usb_m2_ck>;
@@ -1004,7 +1012,7 @@
 		ti,index-power-of-two;
 	};
 
-	usb_otg_dclk_div: usb_otg_dclk_div {
+	usb_otg_dclk_div: usb_otg_dclk_div@184 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&usb_otg_clkin_ck>;
@@ -1013,7 +1021,7 @@
 		ti,index-power-of-two;
 	};
 
-	sata_dclk_div: sata_dclk_div {
+	sata_dclk_div: sata_dclk_div@1c0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkin1>;
@@ -1022,7 +1030,7 @@
 		ti,index-power-of-two;
 	};
 
-	pcie2_dclk_div: pcie2_dclk_div {
+	pcie2_dclk_div: pcie2_dclk_div@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_pcie_ref_m2_ck>;
@@ -1031,7 +1039,7 @@
 		ti,index-power-of-two;
 	};
 
-	pcie_dclk_div: pcie_dclk_div {
+	pcie_dclk_div: pcie_dclk_div@1b4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&apll_pcie_m2_ck>;
@@ -1040,7 +1048,7 @@
 		ti,index-power-of-two;
 	};
 
-	emu_dclk_div: emu_dclk_div {
+	emu_dclk_div: emu_dclk_div@194 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkin1>;
@@ -1049,7 +1057,7 @@
 		ti,index-power-of-two;
 	};
 
-	secure_32k_dclk_div: secure_32k_dclk_div {
+	secure_32k_dclk_div: secure_32k_dclk_div@1c4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&secure_32k_clk_src_ck>;
@@ -1058,21 +1066,21 @@
 		ti,index-power-of-two;
 	};
 
-	clkoutmux0_clk_mux: clkoutmux0_clk_mux {
+	clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x0158>;
 	};
 
-	clkoutmux1_clk_mux: clkoutmux1_clk_mux {
+	clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x015c>;
 	};
 
-	clkoutmux2_clk_mux: clkoutmux2_clk_mux {
+	clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
@@ -1087,21 +1095,21 @@
 		clock-div = <2>;
 	};
 
-	eve_clk: eve_clk {
+	eve_clk: eve_clk@180 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
 		reg = <0x0180>;
 	};
 
-	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux {
+	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0164>;
 	};
 
-	mlb_clk: mlb_clk {
+	mlb_clk: mlb_clk@134 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&mlb_clkin_ck>;
@@ -1110,7 +1118,7 @@
 		ti,index-power-of-two;
 	};
 
-	mlbp_clk: mlbp_clk {
+	mlbp_clk: mlbp_clk@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&mlbp_clkin_ck>;
@@ -1119,7 +1127,7 @@
 		ti,index-power-of-two;
 	};
 
-	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div {
+	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_m2_ck>;
@@ -1128,7 +1136,7 @@
 		ti,index-power-of-two;
 	};
 
-	timer_sys_clk_div: timer_sys_clk_div {
+	timer_sys_clk_div: timer_sys_clk_div@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkin1>;
@@ -1136,28 +1144,28 @@
 		ti,max-div = <2>;
 	};
 
-	video1_dpll_clk_mux: video1_dpll_clk_mux {
+	video1_dpll_clk_mux: video1_dpll_clk_mux@168 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0168>;
 	};
 
-	video2_dpll_clk_mux: video2_dpll_clk_mux {
+	video2_dpll_clk_mux: video2_dpll_clk_mux@16c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x016c>;
 	};
 
-	wkupaon_iclk_mux: wkupaon_iclk_mux {
+	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
 		reg = <0x0108>;
 	};
 
-	gpio1_dbclk: gpio1_dbclk {
+	gpio1_dbclk: gpio1_dbclk@1838 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1165,7 +1173,7 @@
 		reg = <0x1838>;
 	};
 
-	dcan1_sys_clk_mux: dcan1_sys_clk_mux {
+	dcan1_sys_clk_mux: dcan1_sys_clk_mux@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
@@ -1173,7 +1181,7 @@
 		reg = <0x1888>;
 	};
 
-	timer1_gfclk_mux: timer1_gfclk_mux {
+	timer1_gfclk_mux: timer1_gfclk_mux@1840 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -1181,7 +1189,7 @@
 		reg = <0x1840>;
 	};
 
-	uart10_gfclk_mux: uart10_gfclk_mux {
+	uart10_gfclk_mux: uart10_gfclk_mux@1880 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -1190,14 +1198,14 @@
 	};
 };
 &cm_core_clocks {
-	dpll_pcie_ref_ck: dpll_pcie_ref_ck {
+	dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin1>, <&sys_clkin1>;
 		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
 	};
 
-	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck {
+	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_pcie_ref_ck>;
@@ -1216,7 +1224,7 @@
 		ti,bit-shift = <7>;
 	};
 
-	apll_pcie_ck: apll_pcie_ck {
+	apll_pcie_ck: apll_pcie_ck@21c {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-apll-clock";
 		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
@@ -1305,7 +1313,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_per_byp_mux: dpll_per_byp_mux {
+	dpll_per_byp_mux: dpll_per_byp_mux@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
@@ -1313,14 +1321,14 @@
 		reg = <0x014c>;
 	};
 
-	dpll_per_ck: dpll_per_ck {
+	dpll_per_ck: dpll_per_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck {
+	dpll_per_m2_ck: dpll_per_m2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_ck>;
@@ -1339,7 +1347,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_usb_byp_mux: dpll_usb_byp_mux {
+	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
@@ -1347,14 +1355,14 @@
 		reg = <0x018c>;
 	};
 
-	dpll_usb_ck: dpll_usb_ck {
+	dpll_usb_ck: dpll_usb_ck@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
 		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
+	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_usb_ck>;
@@ -1365,7 +1373,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck {
+	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_pcie_ref_ck>;
@@ -1382,7 +1390,7 @@
 		clocks = <&dpll_per_ck>;
 	};
 
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -1393,7 +1401,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -1404,7 +1412,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h13x2_ck: dpll_per_h13x2_ck {
+	dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -1415,7 +1423,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -1426,7 +1434,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -1485,7 +1493,7 @@
 		clock-div = <2>;
 	};
 
-	l3init_60m_fclk: l3init_60m_fclk {
+	l3init_60m_fclk: l3init_60m_fclk@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_usb_m2_ck>;
@@ -1493,7 +1501,7 @@
 		ti,dividers = <1>, <8>;
 	};
 
-	clkout2_clk: clkout2_clk {
+	clkout2_clk: clkout2_clk@6b0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkoutmux2_clk_mux>;
@@ -1501,7 +1509,7 @@
 		reg = <0x06b0>;
 	};
 
-	l3init_960m_gfclk: l3init_960m_gfclk {
+	l3init_960m_gfclk: l3init_960m_gfclk@6c0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_usb_clkdcoldo>;
@@ -1509,7 +1517,7 @@
 		reg = <0x06c0>;
 	};
 
-	dss_32khz_clk: dss_32khz_clk {
+	dss_32khz_clk: dss_32khz_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1517,7 +1525,7 @@
 		reg = <0x1120>;
 	};
 
-	dss_48mhz_clk: dss_48mhz_clk {
+	dss_48mhz_clk: dss_48mhz_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_48m_fclk>;
@@ -1525,7 +1533,7 @@
 		reg = <0x1120>;
 	};
 
-	dss_dss_clk: dss_dss_clk {
+	dss_dss_clk: dss_dss_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_h12x2_ck>;
@@ -1534,7 +1542,7 @@
 		ti,set-rate-parent;
 	};
 
-	dss_hdmi_clk: dss_hdmi_clk {
+	dss_hdmi_clk: dss_hdmi_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&hdmi_dpll_clk_mux>;
@@ -1542,7 +1550,7 @@
 		reg = <0x1120>;
 	};
 
-	dss_video1_clk: dss_video1_clk {
+	dss_video1_clk: dss_video1_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&video1_dpll_clk_mux>;
@@ -1550,7 +1558,7 @@
 		reg = <0x1120>;
 	};
 
-	dss_video2_clk: dss_video2_clk {
+	dss_video2_clk: dss_video2_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&video2_dpll_clk_mux>;
@@ -1558,7 +1566,7 @@
 		reg = <0x1120>;
 	};
 
-	gpio2_dbclk: gpio2_dbclk {
+	gpio2_dbclk: gpio2_dbclk@1760 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1566,7 +1574,7 @@
 		reg = <0x1760>;
 	};
 
-	gpio3_dbclk: gpio3_dbclk {
+	gpio3_dbclk: gpio3_dbclk@1768 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1574,7 +1582,7 @@
 		reg = <0x1768>;
 	};
 
-	gpio4_dbclk: gpio4_dbclk {
+	gpio4_dbclk: gpio4_dbclk@1770 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1582,7 +1590,7 @@
 		reg = <0x1770>;
 	};
 
-	gpio5_dbclk: gpio5_dbclk {
+	gpio5_dbclk: gpio5_dbclk@1778 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1590,7 +1598,7 @@
 		reg = <0x1778>;
 	};
 
-	gpio6_dbclk: gpio6_dbclk {
+	gpio6_dbclk: gpio6_dbclk@1780 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1598,7 +1606,7 @@
 		reg = <0x1780>;
 	};
 
-	gpio7_dbclk: gpio7_dbclk {
+	gpio7_dbclk: gpio7_dbclk@1810 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1606,7 +1614,7 @@
 		reg = <0x1810>;
 	};
 
-	gpio8_dbclk: gpio8_dbclk {
+	gpio8_dbclk: gpio8_dbclk@1818 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1614,7 +1622,7 @@
 		reg = <0x1818>;
 	};
 
-	mmc1_clk32k: mmc1_clk32k {
+	mmc1_clk32k: mmc1_clk32k@1328 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1622,7 +1630,7 @@
 		reg = <0x1328>;
 	};
 
-	mmc2_clk32k: mmc2_clk32k {
+	mmc2_clk32k: mmc2_clk32k@1330 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1630,7 +1638,7 @@
 		reg = <0x1330>;
 	};
 
-	mmc3_clk32k: mmc3_clk32k {
+	mmc3_clk32k: mmc3_clk32k@1820 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1638,7 +1646,7 @@
 		reg = <0x1820>;
 	};
 
-	mmc4_clk32k: mmc4_clk32k {
+	mmc4_clk32k: mmc4_clk32k@1828 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1646,7 +1654,7 @@
 		reg = <0x1828>;
 	};
 
-	sata_ref_clk: sata_ref_clk {
+	sata_ref_clk: sata_ref_clk@1388 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_clkin1>;
@@ -1654,7 +1662,7 @@
 		reg = <0x1388>;
 	};
 
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@13f0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3init_960m_gfclk>;
@@ -1662,7 +1670,7 @@
 		reg = <0x13f0>;
 	};
 
-	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
+	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m@1340 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3init_960m_gfclk>;
@@ -1670,7 +1678,7 @@
 		reg = <0x1340>;
 	};
 
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1678,7 +1686,7 @@
 		reg = <0x0640>;
 	};
 
-	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k {
+	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1686,7 +1694,7 @@
 		reg = <0x0688>;
 	};
 
-	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k {
+	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1694,7 +1702,7 @@
 		reg = <0x0698>;
 	};
 
-	atl_dpll_clk_mux: atl_dpll_clk_mux {
+	atl_dpll_clk_mux: atl_dpll_clk_mux@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
@@ -1702,7 +1710,7 @@
 		reg = <0x0c00>;
 	};
 
-	atl_gfclk_mux: atl_gfclk_mux {
+	atl_gfclk_mux: atl_gfclk_mux@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
@@ -1710,7 +1718,7 @@
 		reg = <0x0c00>;
 	};
 
-	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
+	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@13d0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_gmac_m2_ck>;
@@ -1719,7 +1727,7 @@
 		ti,dividers = <2>;
 	};
 
-	gmac_rft_clk_mux: gmac_rft_clk_mux {
+	gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
@@ -1727,7 +1735,7 @@
 		reg = <0x13d0>;
 	};
 
-	gpu_core_gclk_mux: gpu_core_gclk_mux {
+	gpu_core_gclk_mux: gpu_core_gclk_mux@1220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
@@ -1735,7 +1743,7 @@
 		reg = <0x1220>;
 	};
 
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
@@ -1743,7 +1751,7 @@
 		reg = <0x1220>;
 	};
 
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&wkupaon_iclk_mux>;
@@ -1752,7 +1760,7 @@
 		ti,dividers = <8>, <16>, <32>;
 	};
 
-	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux {
+	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux@1860 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -1760,7 +1768,7 @@
 		reg = <0x1860>;
 	};
 
-	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux {
+	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux@1860 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -1768,7 +1776,7 @@
 		reg = <0x1860>;
 	};
 
-	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux {
+	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux@1860 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
@@ -1776,7 +1784,7 @@
 		reg = <0x1860>;
 	};
 
-	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux {
+	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux@1868 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -1784,7 +1792,7 @@
 		reg = <0x1868>;
 	};
 
-	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux {
+	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
@@ -1792,7 +1800,7 @@
 		reg = <0x1868>;
 	};
 
-	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux {
+	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux@1898 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -1800,7 +1808,7 @@
 		reg = <0x1898>;
 	};
 
-	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux {
+	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux@1898 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
@@ -1808,7 +1816,7 @@
 		reg = <0x1898>;
 	};
 
-	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux {
+	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux@1878 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -1816,7 +1824,7 @@
 		reg = <0x1878>;
 	};
 
-	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux {
+	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux@1878 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
@@ -1824,7 +1832,7 @@
 		reg = <0x1878>;
 	};
 
-	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux {
+	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux@1904 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -1832,7 +1840,7 @@
 		reg = <0x1904>;
 	};
 
-	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux {
+	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux@1904 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
@@ -1840,7 +1848,7 @@
 		reg = <0x1904>;
 	};
 
-	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux {
+	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux@1908 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -1848,7 +1856,7 @@
 		reg = <0x1908>;
 	};
 
-	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux {
+	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux@1908 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
@@ -1856,7 +1864,7 @@
 		reg = <0x1908>;
 	};
 
-	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
+	mcasp8_ahclkx_mux: mcasp8_ahclkx_mux@1890 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
@@ -1864,7 +1872,7 @@
 		reg = <0x1890>;
 	};
 
-	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux {
+	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux@1890 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
@@ -1872,7 +1880,7 @@
 		reg = <0x1890>;
 	};
 
-	mmc1_fclk_mux: mmc1_fclk_mux {
+	mmc1_fclk_mux: mmc1_fclk_mux@1328 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
@@ -1880,7 +1888,7 @@
 		reg = <0x1328>;
 	};
 
-	mmc1_fclk_div: mmc1_fclk_div {
+	mmc1_fclk_div: mmc1_fclk_div@1328 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&mmc1_fclk_mux>;
@@ -1890,7 +1898,7 @@
 		ti,index-power-of-two;
 	};
 
-	mmc2_fclk_mux: mmc2_fclk_mux {
+	mmc2_fclk_mux: mmc2_fclk_mux@1330 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
@@ -1898,7 +1906,7 @@
 		reg = <0x1330>;
 	};
 
-	mmc2_fclk_div: mmc2_fclk_div {
+	mmc2_fclk_div: mmc2_fclk_div@1330 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&mmc2_fclk_mux>;
@@ -1908,7 +1916,7 @@
 		ti,index-power-of-two;
 	};
 
-	mmc3_gfclk_mux: mmc3_gfclk_mux {
+	mmc3_gfclk_mux: mmc3_gfclk_mux@1820 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -1916,7 +1924,7 @@
 		reg = <0x1820>;
 	};
 
-	mmc3_gfclk_div: mmc3_gfclk_div {
+	mmc3_gfclk_div: mmc3_gfclk_div@1820 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&mmc3_gfclk_mux>;
@@ -1926,7 +1934,7 @@
 		ti,index-power-of-two;
 	};
 
-	mmc4_gfclk_mux: mmc4_gfclk_mux {
+	mmc4_gfclk_mux: mmc4_gfclk_mux@1828 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -1934,7 +1942,7 @@
 		reg = <0x1828>;
 	};
 
-	mmc4_gfclk_div: mmc4_gfclk_div {
+	mmc4_gfclk_div: mmc4_gfclk_div@1828 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&mmc4_gfclk_mux>;
@@ -1944,7 +1952,7 @@
 		ti,index-power-of-two;
 	};
 
-	qspi_gfclk_mux: qspi_gfclk_mux {
+	qspi_gfclk_mux: qspi_gfclk_mux@1838 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
@@ -1952,7 +1960,7 @@
 		reg = <0x1838>;
 	};
 
-	qspi_gfclk_div: qspi_gfclk_div {
+	qspi_gfclk_div: qspi_gfclk_div@1838 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&qspi_gfclk_mux>;
@@ -1962,7 +1970,7 @@
 		ti,index-power-of-two;
 	};
 
-	timer10_gfclk_mux: timer10_gfclk_mux {
+	timer10_gfclk_mux: timer10_gfclk_mux@1728 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -1970,7 +1978,7 @@
 		reg = <0x1728>;
 	};
 
-	timer11_gfclk_mux: timer11_gfclk_mux {
+	timer11_gfclk_mux: timer11_gfclk_mux@1730 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -1978,7 +1986,7 @@
 		reg = <0x1730>;
 	};
 
-	timer13_gfclk_mux: timer13_gfclk_mux {
+	timer13_gfclk_mux: timer13_gfclk_mux@17c8 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -1986,7 +1994,7 @@
 		reg = <0x17c8>;
 	};
 
-	timer14_gfclk_mux: timer14_gfclk_mux {
+	timer14_gfclk_mux: timer14_gfclk_mux@17d0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -1994,7 +2002,7 @@
 		reg = <0x17d0>;
 	};
 
-	timer15_gfclk_mux: timer15_gfclk_mux {
+	timer15_gfclk_mux: timer15_gfclk_mux@17d8 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -2002,7 +2010,7 @@
 		reg = <0x17d8>;
 	};
 
-	timer16_gfclk_mux: timer16_gfclk_mux {
+	timer16_gfclk_mux: timer16_gfclk_mux@1830 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -2010,7 +2018,7 @@
 		reg = <0x1830>;
 	};
 
-	timer2_gfclk_mux: timer2_gfclk_mux {
+	timer2_gfclk_mux: timer2_gfclk_mux@1738 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -2018,7 +2026,7 @@
 		reg = <0x1738>;
 	};
 
-	timer3_gfclk_mux: timer3_gfclk_mux {
+	timer3_gfclk_mux: timer3_gfclk_mux@1740 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -2026,7 +2034,7 @@
 		reg = <0x1740>;
 	};
 
-	timer4_gfclk_mux: timer4_gfclk_mux {
+	timer4_gfclk_mux: timer4_gfclk_mux@1748 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -2034,7 +2042,7 @@
 		reg = <0x1748>;
 	};
 
-	timer9_gfclk_mux: timer9_gfclk_mux {
+	timer9_gfclk_mux: timer9_gfclk_mux@1750 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
@@ -2042,7 +2050,7 @@
 		reg = <0x1750>;
 	};
 
-	uart1_gfclk_mux: uart1_gfclk_mux {
+	uart1_gfclk_mux: uart1_gfclk_mux@1840 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -2050,7 +2058,7 @@
 		reg = <0x1840>;
 	};
 
-	uart2_gfclk_mux: uart2_gfclk_mux {
+	uart2_gfclk_mux: uart2_gfclk_mux@1848 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -2058,7 +2066,7 @@
 		reg = <0x1848>;
 	};
 
-	uart3_gfclk_mux: uart3_gfclk_mux {
+	uart3_gfclk_mux: uart3_gfclk_mux@1850 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -2066,7 +2074,7 @@
 		reg = <0x1850>;
 	};
 
-	uart4_gfclk_mux: uart4_gfclk_mux {
+	uart4_gfclk_mux: uart4_gfclk_mux@1858 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -2074,7 +2082,7 @@
 		reg = <0x1858>;
 	};
 
-	uart5_gfclk_mux: uart5_gfclk_mux {
+	uart5_gfclk_mux: uart5_gfclk_mux@1870 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -2082,7 +2090,7 @@
 		reg = <0x1870>;
 	};
 
-	uart7_gfclk_mux: uart7_gfclk_mux {
+	uart7_gfclk_mux: uart7_gfclk_mux@18d0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -2090,7 +2098,7 @@
 		reg = <0x18d0>;
 	};
 
-	uart8_gfclk_mux: uart8_gfclk_mux {
+	uart8_gfclk_mux: uart8_gfclk_mux@18e0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -2098,7 +2106,7 @@
 		reg = <0x18e0>;
 	};
 
-	uart9_gfclk_mux: uart9_gfclk_mux {
+	uart9_gfclk_mux: uart9_gfclk_mux@18e8 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
@@ -2106,7 +2114,7 @@
 		reg = <0x18e8>;
 	};
 
-	vip1_gclk_mux: vip1_gclk_mux {
+	vip1_gclk_mux: vip1_gclk_mux@1020 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
@@ -2114,7 +2122,7 @@
 		reg = <0x1020>;
 	};
 
-	vip2_gclk_mux: vip2_gclk_mux {
+	vip2_gclk_mux: vip2_gclk_mux@1028 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
@@ -2122,7 +2130,7 @@
 		reg = <0x1028>;
 	};
 
-	vip3_gclk_mux: vip3_gclk_mux {
+	vip3_gclk_mux: vip3_gclk_mux@1030 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
@@ -2139,11 +2147,43 @@
 };
 
 &scm_conf_clocks {
-	dss_deshdcp_clk: dss_deshdcp_clk {
+	dss_deshdcp_clk: dss_deshdcp_clk@558 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3_iclk_div>;
 		ti,bit-shift = <0>;
 		reg = <0x558>;
 	};
+
+       ehrpwm0_tbclk: ehrpwm0_tbclk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <20>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <21>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0558>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x6c4>;
+	};
 };
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
index b4031fa4a..504cf45d3 100644
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ b/arch/arm/boot/dts/efm32gg-dk3750.dts
@@ -26,7 +26,7 @@
 		};
 
 		i2c@4000a000 {
-			efm32,location = <3>;
+			energymicro,location = <3>;
 			status = "ok";
 
 			temp@48 {
@@ -43,7 +43,7 @@
 
 		spi0: spi@4000c000 { /* USART0 */
 			cs-gpios = <&gpio 68 1>; // E4
-			location = <1>;
+			energymicro,location = <1>;
 			status = "ok";
 
 			microsd@0 {
@@ -57,7 +57,7 @@
 
 		spi1: spi@4000c400 { /* USART1 */
 			cs-gpios = <&gpio 51 1>; // D3
-			location = <1>;
+			energymicro,location = <1>;
 			status = "ok";
 
 			ks8851@0 {
@@ -70,7 +70,7 @@
 		};
 
 		uart4: uart@4000e400 { /* UART1 */
-			location = <2>;
+			energymicro,location = <2>;
 			status = "ok";
 		};
 
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index 106d505c5..c74798377 100644
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -23,7 +23,7 @@
 
 	soc {
 		adc: adc@40002000 {
-			compatible = "efm32,adc";
+			compatible = "energymicro,efm32-adc";
 			reg = <0x40002000 0x400>;
 			interrupts = <7>;
 			clocks = <&cmu clk_HFPERCLKADC0>;
@@ -31,7 +31,7 @@
 		};
 
 		gpio: gpio@40006000 {
-			compatible = "efm32,gpio";
+			compatible = "energymicro,efm32-gpio";
 			reg = <0x40006000 0x1000>;
 			interrupts = <1 11>;
 			gpio-controller;
@@ -45,7 +45,7 @@
 		i2c0: i2c@4000a000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,i2c";
+			compatible = "energymicro,efm32-i2c";
 			reg = <0x4000a000 0x400>;
 			interrupts = <9>;
 			clocks = <&cmu clk_HFPERCLKI2C0>;
@@ -56,7 +56,7 @@
 		i2c1: i2c@4000a400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,i2c";
+			compatible = "energymicro,efm32-i2c";
 			reg = <0x4000a400 0x400>;
 			interrupts = <10>;
 			clocks = <&cmu clk_HFPERCLKI2C1>;
@@ -67,7 +67,7 @@
 		spi0: spi@4000c000 { /* USART0 */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,spi";
+			compatible = "energymicro,efm32-spi";
 			reg = <0x4000c000 0x400>;
 			interrupts = <3 4>;
 			clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -77,7 +77,7 @@
 		spi1: spi@4000c400 { /* USART1 */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,spi";
+			compatible = "energymicro,efm32-spi";
 			reg = <0x4000c400 0x400>;
 			interrupts = <15 16>;
 			clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -87,7 +87,7 @@
 		spi2: spi@4000c800 { /* USART2 */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,spi";
+			compatible = "energymicro,efm32-spi";
 			reg = <0x4000c800 0x400>;
 			interrupts = <18 19>;
 			clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -95,7 +95,7 @@
 		};
 
 		uart0: uart@4000c000 { /* USART0 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000c000 0x400>;
 			interrupts = <3 4>;
 			clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -103,7 +103,7 @@
 		};
 
 		uart1: uart@4000c400 { /* USART1 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000c400 0x400>;
 			interrupts = <15 16>;
 			clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -111,7 +111,7 @@
 		};
 
 		uart2: uart@4000c800 { /* USART2 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000c800 0x400>;
 			interrupts = <18 19>;
 			clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -119,7 +119,7 @@
 		};
 
 		uart3: uart@4000e000 { /* UART0 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000e000 0x400>;
 			interrupts = <20 21>;
 			clocks = <&cmu clk_HFPERCLKUART0>;
@@ -127,7 +127,7 @@
 		};
 
 		uart4: uart@4000e400 { /* UART1 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000e400 0x400>;
 			interrupts = <22 23>;
 			clocks = <&cmu clk_HFPERCLKUART1>;
@@ -135,28 +135,28 @@
 		};
 
 		timer0: timer@40010000 {
-			compatible = "efm32,timer";
+			compatible = "energymicro,efm32-timer";
 			reg = <0x40010000 0x400>;
 			interrupts = <2>;
 			clocks = <&cmu clk_HFPERCLKTIMER0>;
 		};
 
 		timer1: timer@40010400 {
-			compatible = "efm32,timer";
+			compatible = "energymicro,efm32-timer";
 			reg = <0x40010400 0x400>;
 			interrupts = <12>;
 			clocks = <&cmu clk_HFPERCLKTIMER1>;
 		};
 
 		timer2: timer@40010800 {
-			compatible = "efm32,timer";
+			compatible = "energymicro,efm32-timer";
 			reg = <0x40010800 0x400>;
 			interrupts = <13>;
 			clocks = <&cmu clk_HFPERCLKTIMER2>;
 		};
 
 		timer3: timer@40010c00 {
-			compatible = "efm32,timer";
+			compatible = "energymicro,efm32-timer";
 			reg = <0x40010c00 0x400>;
 			interrupts = <14>;
 			clocks = <&cmu clk_HFPERCLKTIMER3>;
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 1dee0aa4f..60d0a7328 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -18,14 +18,18 @@
 	model = "EMEV2 KZM9D Board";
 	compatible = "renesas,kzm9d", "renesas,emev2";
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x8000000>;
 	};
 
+	aliases {
+		serial1 = &uart1;
+	};
+
 	chosen {
-		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
-		stdout-path = &uart1;
+		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp";
+		stdout-path = "serial1:115200n8";
 	};
 
 	gpio_keys {
@@ -33,37 +37,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		one {
 			debounce_interval = <50>;
-			wakeup = <1>;
+			wakeup-source;
 			label = "DSW2-1";
 			linux,code = <KEY_1>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
-		button@2 {
+		two {
 			debounce_interval = <50>;
-			wakeup = <1>;
+			wakeup-source;
 			label = "DSW2-2";
 			linux,code = <KEY_2>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		button@3 {
+		three {
 			debounce_interval = <50>;
-			wakeup = <1>;
+			wakeup-source;
 			label = "DSW2-3";
 			linux,code = <KEY_3>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
-		button@4 {
+		four {
 			debounce_interval = <50>;
-			wakeup = <1>;
+			wakeup-source;
 			label = "DSW2-4";
 			linux,code = <KEY_4>;
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	reg_1p8v: regulator@0 {
+	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
 		regulator-min-microvolt = <1800000>;
@@ -72,7 +76,7 @@
 		regulator-boot-on;
 	};
 
-	reg_3p3v: regulator@1 {
+	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -95,10 +99,18 @@
 	};
 };
 
+&iic0 {
+	status = "okay";
+};
+
+&iic1 {
+	status = "okay";
+};
+
 &pfc {
-	uart1_pins: serial@e1030000 {
-		renesas,groups = "uart1_ctrl", "uart1_data";
-		renesas,function = "uart1";
+	uart1_pins: uart1 {
+		groups = "uart1_ctrl", "uart1_data";
+		function = "uart1";
 	};
 };
 
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index bb45694d9..cd119400f 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -9,6 +9,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -21,6 +22,8 @@
 		gpio2 = &gpio2;
 		gpio3 = &gpio3;
 		gpio4 = &gpio4;
+		i2c0 = &iic0;
+		i2c1 = &iic1;
 	};
 
 	cpus {
@@ -42,7 +45,7 @@
 	};
 
 	gic: interrupt-controller@e0020000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		interrupt-controller;
 		#interrupt-cells = <3>;
 		reg = <0xe0028000 0x1000>,
@@ -51,8 +54,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	clocks@e0110000 {
@@ -66,6 +69,30 @@
 			clock-frequency = <32768>;
 			#clock-cells = <0>;
 		};
+		iic0_sclkdiv: iic0_sclkdiv@624,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic0_sclk: iic0_sclk@48c,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x48c 1>;
+			clocks = <&iic0_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		iic1_sclkdiv: iic1_sclkdiv@624,16 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 16>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic1_sclk: iic1_sclk@490,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x490 1>;
+			clocks = <&iic1_sclkdiv>;
+			#clock-cells = <0>;
+		};
 		pll3_fo: pll3_fo {
 			compatible = "fixed-factor-clock";
 			clocks = <&c32ki>;
@@ -73,55 +100,55 @@
 			clock-mult = <7000>;
 			#clock-cells = <0>;
 		};
-		usia_u0_sclkdiv: usia_u0_sclkdiv {
+		usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x610 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usib_u1_sclkdiv: usib_u1_sclkdiv {
+		usib_u1_sclkdiv: usib_u1_sclkdiv@65c,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x65c 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usib_u2_sclkdiv: usib_u2_sclkdiv {
+		usib_u2_sclkdiv: usib_u2_sclkdiv@65c,16 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x65c 16>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usib_u3_sclkdiv: usib_u3_sclkdiv {
+		usib_u3_sclkdiv: usib_u3_sclkdiv@660,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x660 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usia_u0_sclk: usia_u0_sclk {
+		usia_u0_sclk: usia_u0_sclk@4a0,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4a0 1>;
 			clocks = <&usia_u0_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		usib_u1_sclk: usib_u1_sclk {
+		usib_u1_sclk: usib_u1_sclk@4b8,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4b8 1>;
 			clocks = <&usib_u1_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		usib_u2_sclk: usib_u2_sclk {
+		usib_u2_sclk: usib_u2_sclk@4bc,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4bc 1>;
 			clocks = <&usib_u2_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		usib_u3_sclk: usib_u3_sclk {
+		usib_u3_sclk: usib_u3_sclk@4c0,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4c0 1>;
 			clocks = <&usib_u3_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		sti_sclk: sti_sclk {
+		sti_sclk: sti_sclk@528,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x528 1>;
 			clocks = <&c32ki>;
@@ -132,7 +159,7 @@
 	timer@e0180000 {
 		compatible = "renesas,em-sti";
 		reg = <0xe0180000 0x54>;
-		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&sti_sclk>;
 		clock-names = "sclk";
 	};
@@ -140,7 +167,7 @@
 	uart0: serial@e1020000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1020000 0x38>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usia_u0_sclk>;
 		clock-names = "sclk";
 	};
@@ -148,7 +175,7 @@
 	uart1: serial@e1030000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1030000 0x38>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u1_sclk>;
 		clock-names = "sclk";
 	};
@@ -156,7 +183,7 @@
 	uart2: serial@e1040000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1040000 0x38>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u2_sclk>;
 		clock-names = "sclk";
 	};
@@ -164,7 +191,7 @@
 	uart3: serial@e1050000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1050000 0x38>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u3_sclk>;
 		clock-names = "sclk";
 	};
@@ -177,8 +204,8 @@
 	gpio0: gpio@e0050000 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
 		#gpio-cells = <2>;
@@ -189,8 +216,8 @@
 	gpio1: gpio@e0050080 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 32 32>;
 		#gpio-cells = <2>;
@@ -201,8 +228,8 @@
 	gpio2: gpio@e0050100 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
 		#gpio-cells = <2>;
@@ -213,8 +240,8 @@
 	gpio3: gpio@e0050180 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
 		#gpio-cells = <2>;
@@ -225,8 +252,8 @@
 	gpio4: gpio@e0050200 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 31>;
 		#gpio-cells = <2>;
@@ -234,4 +261,26 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	iic0: i2c@e0070000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe0070000 0x28>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic0_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
+
+	iic1: i2c@e10a0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe10a0000 0x28>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic1_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi
new file mode 100644
index 000000000..aaf1261d2
--- /dev/null
+++ b/arch/arm/boot/dts/ep7209.dtsi
@@ -0,0 +1,191 @@
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/clps711x-clock.h>
+
+/ {
+	model = "Cirrus Logic EP7209";
+	compatible = "cirrus,ep7209";
+
+	aliases {
+		gpio0 = &porta;
+		gpio1 = &portb;
+		gpio3 = &portd;
+		gpio4 = &porte;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		spi0 = &spi;
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm720t";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		clks: clks@80000000 {
+			#clock-cells = <1>;
+			compatible = "cirrus,ep7209-clk";
+			reg = <0x80000000 0xc000>;
+			startup-frequency = <73728000>;
+		};
+
+		intc: intc@80000000 {
+			compatible = "cirrus,ep7209-intc";
+			reg = <0x80000000 0x4000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		porta: gpio@80000000 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000000 0x1 0x80000040 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portb: gpio@80000001 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000001 0x1 0x80000041 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portd: gpio@80000003 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000003 0x1 0x80000043 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		porte: gpio@80000083 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000083 0x1 0x800000c3 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		syscon1: syscon@80000100 {
+			compatible = "cirrus,ep7209-syscon1", "syscon";
+			reg = <0x80000100 0x80>;
+		};
+
+		bus: bus@80000180 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "cirrus,ep7209-bus", "simple-bus";
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			reg = <0x80000180 0x80>;
+			ranges = <
+				0 0 0x00000000 0x10000000
+				1 0 0x10000000 0x10000000
+				2 0 0x20000000 0x10000000
+				3 0 0x30000000 0x10000000
+				4 0 0x40000000 0x10000000
+				5 0 0x50000000 0x10000000
+				6 0 0x60000000 0x0000c000
+				7 0 0x70000000 0x00000080
+			>;
+		};
+
+		fb: fb@800002c0 {
+			compatible = "cirrus,ep7209-fb";
+			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			status = "disabled";
+		};
+
+		timer1: timer@80000300 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000300 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER1>;
+			interrupts = <8>;
+		};
+
+		timer2: timer@80000340 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000340 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER2>;
+			interrupts = <9>;
+		};
+
+		pwm: pwm@80000400 {
+			compatible = "cirrus,ep7209-pwm";
+			reg = <0x80000400 0x4>;
+			clocks = <&clks CLPS711X_CLK_PWM>;
+			#pwm-cells = <1>;
+		};
+
+		uart1: uart@80000480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80000480 0x80>;
+			interrupts = <12 13>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon1>;
+		};
+
+		spi: spi@80000500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cirrus,ep7209-spi";
+			reg = <0x80000500 0x4>;
+			interrupts = <15>;
+			clocks = <&clks CLPS711X_CLK_SPI>;
+			status = "disabled";
+		};
+
+		syscon2: syscon@80001100 {
+			compatible = "cirrus,ep7209-syscon2", "syscon";
+			reg = <0x80001100 0x80>;
+		};
+
+		uart2: uart@80001480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80001480 0x80>;
+			interrupts = <28 29>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon2>;
+		};
+
+		dai: dai@80002000 {
+			#sound-dai-cells = <0>;
+			compatible = "cirrus,ep7209-dai";
+			reg = <0x80002000 0x604>;
+			clocks = <&clks CLPS711X_CLK_PLL>;
+			clock-names = "pll";
+			interrupts = <32>;
+			status = "disabled";
+		};
+
+		syscon3: syscon@80002200 {
+			compatible = "cirrus,ep7209-syscon3", "syscon";
+			reg = <0x80002200 0x40>;
+		};
+	};
+
+	mctrl: mctrl {
+		compatible = "cirrus,ep7209-mctrl-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts
new file mode 100644
index 000000000..9a134ed27
--- /dev/null
+++ b/arch/arm/boot/dts/ep7211-edb7211.dts
@@ -0,0 +1,100 @@
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ */
+
+#include "ep7211.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cirrus Logic EP7211 Development Board";
+	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
+
+	memory {
+		reg = <0xc0000000 0x02000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0>;
+		brightness-levels = <
+			0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+			0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf
+		>;
+		default-brightness-level = <0x0>;
+		power-supply = <&blen>;
+	};
+
+	display: display {
+		model = "320x240x4";
+		native-mode = <&timing0>;
+		bits-per-pixel = <4>;
+		ac-prescale = <17>;
+
+		display-timings {
+			timing0: 320x240 {
+				hactive = <320>;
+				hback-porch = <0>;
+				hfront-porch = <0>;
+				hsync-len = <0>;
+				vactive = <240>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <0>;
+				clock-frequency = <6500000>;
+			};
+		};
+	};
+
+	i2c: i2c {
+		compatible = "i2c-gpio";
+		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
+			<&portd 5 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	lcddc: lcddc {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	blen: blen {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bus {
+	flash: nor@00000000 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fb {
+	display = <&display>;
+	lcd-supply = <&lcddc>;
+	status = "okay";
+};
+
+&portd {
+	lcden {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LCD ENABLE";
+	};
+};
diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/ep7211.dtsi
new file mode 100644
index 000000000..e438f6db0
--- /dev/null
+++ b/arch/arm/boot/dts/ep7211.dtsi
@@ -0,0 +1,12 @@
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ */
+
+#include "ep7209.dtsi"
+
+/ {
+	model = "Cirrus Logic EP7211";
+	compatible = "cirrus,ep7211", "cirrus,ep7209";
+};
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 243044343..4687229a3 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -77,13 +77,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		pcf8563@50 {
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index f72969efe..20a4481b6 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -46,13 +46,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
new file mode 100644
index 000000000..f78c14c82
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region_mfc_left {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x1000000>;
+			alignment = <0x100000>;
+		};
+
+		mfc_right: region_mfc_right {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x800000>;
+			alignment = <0x100000>;
+		};
+	};
+};
+
+&mfc {
+	memory-region = <&mfc_left>, <&mfc_right>;
+};
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
new file mode 100644
index 000000000..09a204005
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	soc {
+		compatible = "simple-bus";
+
+		poweroff: syscon-poweroff {
+			compatible = "syscon-poweroff";
+			regmap = <&pmu_system_controller>;
+			offset = <0x330C>; /* PS_HOLD_CONTROL */
+			mask = <0x5200>; /* reset value */
+		};
+
+		reboot: syscon-reboot {
+			compatible = "syscon-reboot";
+			regmap = <&pmu_system_controller>;
+			offset = <0x0400>; /* SWRESET */
+			mask = <0x1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
new file mode 100644
index 000000000..be4d6aa37
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -0,0 +1,43 @@
+/*
+ * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 evaluation board
+ * which is based on Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos3250-artik5.dtsi"
+
+/ {
+	model = "Samsung ARTIK5 evaluation board";
+	compatible = "samsung,artik5-eval", "samsung,artik5",
+			"samsung,exynos3250", "samsung,exynos3";
+};
+
+&mshc_2 {
+	num-slots = <1>;
+	cap-sd-highspeed;
+	disable-wp;
+	vqmmc-supply = <&ldo3_reg>;
+	card-detect-delay = <200>;
+	clock-frequency = <100000000>;
+	clock-freq-min-max = <400000 100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
new file mode 100644
index 000000000..130e946f1
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -0,0 +1,334 @@
+/*
+ * Samsung's Exynos3250 based ARTIK5 module device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 module which is based on
+ * Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos3250.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	memory {
+		reg = <0x40000000 0x1ff00000>;
+	};
+
+	firmware@0205f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0205f000 0x1000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 500MHz */
+					cooling-device = <&cpu0 5 5>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 8 8>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo7_reg>;
+	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+	assigned-clock-rates = <6000000>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	s2mps14_pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		interrupt-parent = <&gpx3>;
+		interrupts = <5 IRQ_TYPE_NONE>;
+		reg = <0x66>;
+
+		s2mps14_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps14_ap", "unused",
+				"s2mps14_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				/* VDD_ALIVE15x */
+				regulator-name = "VLDO1_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				/* VDDQM176 ~ VDDQM185 */
+				regulator-name = "VLDO2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				/*
+				 * VDD1_E106 ~ VDD1_E111
+				 * DVDD_RTC_AP, DVDD_MMC2_AP
+				 */
+				regulator-name = "VLDO3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				/*  AVDD_PLL1120 ~ AVDD_PLL11201 */
+				regulator-name = "VLDO4_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				/* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
+				regulator-name = "VLDO5_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* VDD_USB, VDD10_HSIC */
+				regulator-name = "VLDO6_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				/*
+				 * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
+				 * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
+				 */
+				regulator-name = "VLDO7_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				/* AVDD33_UOTG */
+				regulator-name = "VLDO8_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				/* VDDQ_E86 ~ VDDQ_E105*/
+				regulator-name = "VLDO9_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VLDO10_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo11_reg: LDO11 {
+				/* VDD74 ~ VDD75 */
+				regulator-name = "VLDO11_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo12_reg: LDO12 {
+				/* VDD72 ~ VDD73 */
+				regulator-name = "VLDO12_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VLDO13_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VLDO14_2.7V";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VLDO_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VLDO16_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VLDO17_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo18_reg: LDO18 {
+				/* DVDD_MMC2_AP */
+				regulator-name = "VLDO18_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VLDO19_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VLDO20_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VLDO21_1.25V";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VLDO22_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo23_reg: LDO23 {
+				/* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
+				regulator-name = "VLDO23_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VLDO24_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VLDO25_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				/* VDD_MIF */
+				regulator-name = "VBUCK1_1.0V";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				/* VDD_CPU */
+				regulator-name = "VBUCK2_1.2V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				/* VDD_G3D */
+				regulator-name = "VBUCK3_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VBUCK4_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VBUCK5_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mshc_0 {
+	num-slots = <1>;
+	non-removable;
+	cap-mmc-highspeed;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo12_reg>;
+	clock-frequency = <100000000>;
+	clock-freq-min-max = <400000 100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index a5863acc5..8c8906266 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos3250.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
@@ -43,7 +44,7 @@
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -52,13 +53,13 @@
 		regulator-name = "V_EMMC_2.8V-fixed";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 0>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -67,7 +68,7 @@
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 0>;
 			reg = <0x25>;
-			wakeup;
+			wakeup-source;
 
 			muic: max77836-muic {
 				compatible = "maxim,max77836-muic";
@@ -116,6 +117,21 @@
 		min-microvolt = <1100000>;
 		max-microvolt = <2700000>;
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Correspond to 500MHz at freq_table */
+					cooling-device = <&cpu0 5 5>;
+				};
+				map1 {
+					/* Correspond to 200MHz at freq_table */
+					cooling-device = <&cpu0 8 8>;
+				};
+			};
+		};
+	};
 };
 
 &adc {
@@ -141,7 +157,18 @@
 	};
 };
 
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &exynos_usbphy {
+	vbus-supply = <&safeout_reg>;
 	status = "okay";
 };
 
@@ -165,7 +192,7 @@
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 0>;
 		reg = <0x66>;
-		wakeup;
+		wakeup-source;
 
 		s2mps14_osc: clocks {
 			compatible = "samsung,s2mps14-clk";
@@ -247,14 +274,14 @@
 				regulator-name = "V_EMMC_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo12_reg: LDO12 {
 				regulator-name = "V_EMMC_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo13_reg: LDO13 {
@@ -438,46 +465,6 @@
 	status = "okay";
 };
 
-&ppmu_dmc0 {
-	status = "okay";
-
-	events {
-		ppmu_dmc0_3: ppmu-event3-dmc0 {
-			event-name = "ppmu-event3-dmc0";
-		};
-	};
-};
-
-&ppmu_dmc1 {
-	status = "okay";
-
-	events {
-		ppmu_dmc1_3: ppmu-event3-dmc1 {
-			event-name = "ppmu-event3-dmc1";
-		};
-	};
-};
-
-&ppmu_leftbus {
-	status = "okay";
-
-	events {
-		ppmu_leftbus_3: ppmu-event3-leftbus {
-			event-name = "ppmu-event3-leftbus";
-		};
-	};
-};
-
-&ppmu_rightbus {
-	status = "okay";
-
-	events {
-		ppmu_rightbus_3: ppmu-event3-rightbus {
-			event-name = "ppmu-event3-rightbus";
-		};
-	};
-};
-
 &xusbxti {
 	clock-frequency = <24000000>;
 };
@@ -538,7 +525,17 @@
 
 &pinctrl_1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+	};
 
 	sleep1: sleep-state {
 		PIN_SLP(gpe0-0, PREV, NONE);
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 5ab81c39e..40ea7de44 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -16,11 +16,49 @@
 #define PIN_PULL_DOWN		1
 #define PIN_PULL_UP		3
 
+#define PIN_DRV_LV1		0
+#define PIN_DRV_LV2		2
+#define PIN_DRV_LV3		1
+#define PIN_DRV_LV4		3
+
 #define PIN_PDN_OUT0		0
 #define PIN_PDN_OUT1		1
 #define PIN_PDN_INPUT		2
 #define PIN_PDN_PREV		3
 
+#define PIN_IN(_pin, _pull, _drv)			\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <0>;		\
+		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+	}
+
+#define PIN_OUT(_pin, _drv)				\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <1>;		\
+		samsung,pin-pud = <0>;			\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+	}
+
+#define PIN_OUT_SET(_pin, _val, _drv)			\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <1>;		\
+		samsung,pin-pud = <0>;			\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+		samsung,pin-val = <_val>;		\
+	}
+
+#define PIN_CFG(_pin, _sel, _pull, _drv)		\
+	_pin {						\
+		samsung,pins = #_pin;			\
+		samsung,pin-function = <_sel>;		\
+		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
+		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+	}
+
 #define PIN_SLP(_pin, _mode, _pull)				\
 	_pin {							\
 		samsung,pins = #_pin;				\
@@ -120,6 +158,13 @@
 		samsung,pin-drv = <0>;
 	};
 
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <3>;
@@ -445,6 +490,41 @@
 		samsung,pin-drv = <3>;
 	};
 
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
 	cam_port_b_io: cam-port-b-io {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index baa9b2f52..a92181368 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos3250.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
@@ -43,13 +44,13 @@
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -58,7 +59,7 @@
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 0>;
 			reg = <0x25>;
-			wakeup;
+			wakeup-source;
 
 			muic: max77836-muic {
 				compatible = "maxim,max77836-muic";
@@ -107,6 +108,21 @@
 		min-microvolt = <1100000>;
 		max-microvolt = <2700000>;
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 500MHz */
+					cooling-device = <&cpu0 5 5>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 8 8>;
+				};
+			};
+		};
+	};
 };
 
 &adc {
@@ -132,8 +148,60 @@
 	};
 };
 
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_lcd0 {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mcuisp {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_isp {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peril {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &exynos_usbphy {
 	status = "okay";
+	vbus-supply = <&safeout_reg>;
 };
 
 &hsotg {
@@ -169,8 +237,8 @@
 		reg = <0>;
 		vdd3-supply = <&ldo16_reg>;
 		vci-supply = <&ldo20_reg>;
-		reset-gpios = <&gpe0 1 0>;
-		te-gpios = <&gpx0 6 0>;
+		reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <30>;
 		power-off-delay= <120>;
 		reset-delay = <5>;
@@ -226,7 +294,7 @@
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 0>;
 		reg = <0x66>;
-		wakeup;
+		wakeup-source;
 
 		s2mps14_osc: clocks {
 			compatible = "samsung,s2mps14-clk";
@@ -349,14 +417,14 @@
 				regulator-name = "V_EMMC_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo12_reg: LDO12 {
 				regulator-name = "V_EMMC_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo13_reg: LDO13 {
@@ -564,10 +632,6 @@
 	status = "okay";
 };
 
-&mfc {
-	status = "okay";
-};
-
 &jpeg {
 	status = "okay";
 };
@@ -615,53 +679,27 @@
 	status = "okay";
 };
 
-&ppmu_dmc0 {
-	status = "okay";
-
-	events {
-		ppmu_dmc0_3: ppmu-event3-dmc0 {
-			event-name = "ppmu-event3-dmc0";
-		};
-	};
-};
-
-&ppmu_dmc1 {
-	status = "okay";
-
-	events {
-		ppmu_dmc1_3: ppmu-event3-dmc1 {
-			event-name = "ppmu-event3-dmc1";
-		};
-	};
-};
-
-&ppmu_leftbus {
-	status = "okay";
-
-	events {
-		ppmu_leftbus_3: ppmu-event3-leftbus {
-			event-name = "ppmu-event3-leftbus";
-		};
-	};
-};
-
-&ppmu_rightbus {
-	status = "okay";
-
-	events {
-		ppmu_rightbus_3: ppmu-event3-rightbus {
-			event-name = "ppmu-event3-rightbus";
-		};
-	};
-};
-
 &xusbxti {
 	clock-frequency = <24000000>;
 };
 
 &pinctrl_0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
+	pinctrl-0 = <&initial0 &sleep0>;
+
+	initial0: initial-state {
+		PIN_IN(gpa1-4, DOWN, LV1);
+		PIN_IN(gpa1-5, DOWN, LV1);
+
+		PIN_IN(gpc0-0, DOWN, LV1);
+		PIN_IN(gpc0-1, DOWN, LV1);
+		PIN_IN(gpc0-2, DOWN, LV1);
+		PIN_IN(gpc0-3, DOWN, LV1);
+		PIN_IN(gpc0-4, DOWN, LV1);
+
+		PIN_IN(gpd0-0, DOWN, LV1);
+		PIN_IN(gpd0-1, DOWN, LV1);
+	};
 
 	sleep0: sleep-state {
 		PIN_SLP(gpa0-0, INPUT, DOWN);
@@ -715,7 +753,60 @@
 
 &pinctrl_1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpe0-6, DOWN, LV1);
+		PIN_IN(gpe0-7, DOWN, LV1);
+
+		PIN_IN(gpe1-0, DOWN, LV1);
+		PIN_IN(gpe1-3, DOWN, LV1);
+		PIN_IN(gpe1-4, DOWN, LV1);
+		PIN_IN(gpe1-5, DOWN, LV1);
+		PIN_IN(gpe1-6, DOWN, LV1);
+
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+
+		PIN_IN(gpm0-0, DOWN, LV1);
+		PIN_IN(gpm0-1, DOWN, LV1);
+		PIN_IN(gpm0-2, DOWN, LV1);
+		PIN_IN(gpm0-3, DOWN, LV1);
+		PIN_IN(gpm0-4, DOWN, LV1);
+		PIN_IN(gpm0-5, DOWN, LV1);
+		PIN_IN(gpm0-6, DOWN, LV1);
+		PIN_IN(gpm0-7, DOWN, LV1);
+
+		PIN_IN(gpm1-0, DOWN, LV1);
+		PIN_IN(gpm1-1, DOWN, LV1);
+		PIN_IN(gpm1-2, DOWN, LV1);
+		PIN_IN(gpm1-3, DOWN, LV1);
+		PIN_IN(gpm1-4, DOWN, LV1);
+		PIN_IN(gpm1-5, DOWN, LV1);
+		PIN_IN(gpm1-6, DOWN, LV1);
+
+		PIN_IN(gpm2-0, DOWN, LV1);
+		PIN_IN(gpm2-1, DOWN, LV1);
+
+		PIN_IN(gpm3-0, DOWN, LV1);
+		PIN_IN(gpm3-1, DOWN, LV1);
+		PIN_IN(gpm3-2, DOWN, LV1);
+		PIN_IN(gpm3-3, DOWN, LV1);
+		PIN_IN(gpm3-4, DOWN, LV1);
+
+		PIN_IN(gpm4-1, DOWN, LV1);
+		PIN_IN(gpm4-2, DOWN, LV1);
+		PIN_IN(gpm4-3, DOWN, LV1);
+		PIN_IN(gpm4-4, DOWN, LV1);
+		PIN_IN(gpm4-5, DOWN, LV1);
+		PIN_IN(gpm4-6, DOWN, LV1);
+		PIN_IN(gpm4-7, DOWN, LV1);
+	};
 
 	sleep1: sleep-state {
 		PIN_SLP(gpe0-0, PREV, NONE);
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 2db99433e..70e3aceab 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -19,6 +19,7 @@
 
 #include "skeleton.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
+#include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
 
 / {
@@ -30,6 +31,7 @@
 		pinctrl1 = &pinctrl_1;
 		mshc0 = &mshc_0;
 		mshc1 = &mshc_1;
+		mshc2 = &mshc_2;
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		i2c0 = &i2c_0;
@@ -42,6 +44,7 @@
 		i2c7 = &i2c_7;
 		serial0 = &serial_0;
 		serial1 = &serial_1;
+		serial2 = &serial_2;
 	};
 
 	cpus {
@@ -53,6 +56,22 @@
 			compatible = "arm,cortex-a7";
 			reg = <0>;
 			clock-frequency = <1000000000>;
+			clocks = <&cmu CLK_ARM_CLK>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			operating-points = <
+				1000000 1150000
+				900000  1112500
+				800000  1075000
+				700000  1037500
+				600000  1000000
+				500000  962500
+				400000  925000
+				300000  887500
+				200000  850000
+				100000  850000
+			>;
 		};
 
 		cpu1: cpu@1 {
@@ -136,7 +155,7 @@
 			interrupt-parent = <&gic>;
 		};
 
-		mipi_phy: video-phy@10020710 {
+		mipi_phy: video-phy {
 			compatible = "samsung,s5pv210-mipi-video-phy";
 			#phy-cells = <1>;
 			syscon = <&pmu_system_controller>;
@@ -317,7 +336,7 @@
 		};
 
 		mshc_0: mshc@12510000 {
-			compatible = "samsung,exynos5250-dw-mshc";
+			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12510000 0x1000>;
 			interrupts = <0 142 0>;
 			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
@@ -329,7 +348,7 @@
 		};
 
 		mshc_1: mshc@12520000 {
-			compatible = "samsung,exynos5250-dw-mshc";
+			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12520000 0x1000>;
 			interrupts = <0 143 0>;
 			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
@@ -340,6 +359,18 @@
 			status = "disabled";
 		};
 
+		mshc_2: mshc@12530000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12530000 0x1000>;
+			interrupts = <0 144 0>;
+			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		exynos_usbphy: exynos-usbphy@125B0000 {
 			compatible = "samsung,exynos3250-usb2-phy";
 			reg = <0x125B0000 0x100>;
@@ -351,7 +382,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -400,7 +431,6 @@
 			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
 			power-domains = <&pd_mfc>;
 			iommus = <&sysmmu_mfc>;
-			status = "disabled";
 		};
 
 		sysmmu_mfc: sysmmu@13620000 {
@@ -435,6 +465,17 @@
 			status = "disabled";
 		};
 
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <0 111 0>;
+			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_data>;
+			status = "disabled";
+		};
+
 		i2c_0: i2c@13860000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -671,6 +712,187 @@
 			clock-names = "ppmu";
 			status = "disabled";
 		};
+
+		bus_dmc: bus_dmc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu_dmc CLK_DIV_DMC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_dmc_opp_table>;
+			status = "disabled";
+		};
+
+		bus_dmc_opp_table: opp_table1 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp@50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				opp-microvolt = <800000>;
+			};
+			opp@100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <800000>;
+			};
+			opp@134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <800000>;
+			};
+			opp@200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <825000>;
+			};
+			opp@400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <875000>;
+			};
+		};
+
+		bus_leftbus: bus_leftbus {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_GDL>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_rightbus: bus_rightbus {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_GDR>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_lcd0: bus_lcd0 {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_160>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_fsys: bus_fsys {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_200>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_mcuisp: bus_mcuisp {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_mcuisp_opp_table>;
+			status = "disabled";
+		};
+
+		bus_isp: bus_isp {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_266>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_isp_opp_table>;
+			status = "disabled";
+		};
+
+		bus_peril: bus_peril {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_100>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_peril_opp_table>;
+			status = "disabled";
+		};
+
+		bus_mfc: bus_mfc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_SCLK_MFC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_leftbus_opp_table: opp_table2 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp@50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				opp-microvolt = <900000>;
+			};
+			opp@80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+				opp-microvolt = <900000>;
+			};
+			opp@100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <1000000>;
+			};
+			opp@134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <1000000>;
+			};
+			opp@200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <1000000>;
+			};
+		};
+
+		bus_mcuisp_opp_table: opp_table3 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp@50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp@80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp@100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp@200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp@400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
+
+		bus_isp_opp_table: opp_table4 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp@50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp@80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp@100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp@200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp@300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+
+		bus_peril_opp_table: opp_table5 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp@50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp@80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp@100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index b0d52b1a6..32f22e12c 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -22,6 +22,7 @@
 #include <dt-bindings/clock/exynos4.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
 #include "skeleton.dtsi"
+#include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
@@ -76,7 +77,12 @@
 		reg = <0x10000000 0x100>;
 	};
 
-	mipi_phy: video-phy@10020710 {
+	memory-controller@12570000 {
+		compatible = "samsung,exynos4210-srom";
+		reg = <0x12570000 0x14>;
+	};
+
+	mipi_phy: video-phy {
 		compatible = "samsung,s5pv210-mipi-video-phy";
 		#phy-cells = <1>;
 		syscon = <&pmu_system_controller>;
@@ -422,7 +428,6 @@
 		clock-names = "mfc", "sclk_mfc";
 		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
 		iommu-names = "left", "right";
-		status = "disabled";
 	};
 
 	serial_0: serial@13800000 {
@@ -431,6 +436,8 @@
 		interrupts = <0 52 0>;
 		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
+		dmas = <&pdma0 15>, <&pdma0 16>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -440,6 +447,8 @@
 		interrupts = <0 53 0>;
 		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
+		dmas = <&pdma1 15>, <&pdma1 16>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -449,6 +458,8 @@
 		interrupts = <0 54 0>;
 		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
+		dmas = <&pdma0 17>, <&pdma0 18>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -458,6 +469,8 @@
 		interrupts = <0 55 0>;
 		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
+		dmas = <&pdma1 17>, <&pdma1 18>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -639,7 +652,7 @@
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges;
 
@@ -702,6 +715,16 @@
 		clocks = <&clock CLK_JPEG>;
 		clock-names = "jpeg";
 		power-domains = <&pd_cam>;
+		iommus = <&sysmmu_jpeg>;
+	};
+
+	rotator: rotator@12810000 {
+		compatible = "samsung,exynos4210-rotator";
+		reg = <0x12810000 0x64>;
+		interrupts = <0 83 0>;
+		clocks = <&clock CLK_ROTATOR>;
+		clock-names = "rotator";
+		iommus = <&sysmmu_rotator>;
 	};
 
 	hdmi: hdmi@12D00000 {
@@ -719,6 +742,18 @@
 		status = "disabled";
 	};
 
+	hdmicec: cec@100B0000 {
+		compatible = "samsung,s5p-cec";
+		reg = <0x100B0000 0x200>;
+		interrupts = <0 114 0>;
+		clocks = <&clock CLK_HDMI_CEC>;
+		clock-names = "hdmicec";
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_cec>;
+		status = "disabled";
+	};
+
 	mixer: mixer@12C10000 {
 		compatible = "samsung,exynos4210-mixer";
 		interrupts = <0 91 0>;
@@ -931,7 +966,6 @@
 		interrupts = <5 0>;
 		clock-names = "sysmmu", "master";
 		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		power-domains = <&pd_lcd0>;
 		#iommu-cells = <0>;
 	};
 
@@ -945,4 +979,19 @@
 		power-domains = <&pd_lcd0>;
 		#iommu-cells = <0>;
 	};
+
+	sss: sss@10830000 {
+		compatible = "samsung,exynos4210-secss";
+		reg = <0x10830000 0x300>;
+		interrupts = <0 112 0>;
+		clocks = <&clock CLK_SSS>;
+		clock-names = "secss";
+	};
+
+	prng: rng@10830400 {
+		compatible = "samsung,exynos4-rng";
+		reg = <0x10830400 0x200>;
+		clocks = <&clock CLK_SSS>;
+		clock-names = "secss";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index e050d85cd..be2751eeb 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -16,7 +16,9 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4210";
@@ -45,7 +47,7 @@
 			regulator-name = "VMEM_VDD_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
+			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -57,44 +59,44 @@
 
 		up {
 			label = "Up";
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		down {
 			label = "Down";
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back {
 			label = "Back";
-			gpios = <&gpx1 7 1>;
+			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		home {
 			label = "Home";
-			gpios = <&gpx1 6 1>;
+			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
 			label = "Menu";
-			gpios = <&gpx1 5 1>;
+			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 		status {
-			gpios = <&gpx1 3 1>;
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -137,10 +139,6 @@
 	status = "okay";
 };
 
-&g2d {
-	status = "okay";
-};
-
 &i2c_0 {
 	status = "okay";
 	samsung,i2c-sda-delay = <100>;
@@ -290,12 +288,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &sdhci_0 {
 	bus-width = <4>;
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index a7c212891..9331c6252 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -820,6 +820,13 @@
 			samsung,pin-pud = <1>;
 			samsung,pin-drv = <0>;
 		};
+
+		hdmi_cec: hdmi-cec {
+			samsung,pins = "gpx3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@03860000 {
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 043b03caf..847fae3dd 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -16,6 +16,8 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Samsung smdkv310 evaluation board based on Exynos4210";
@@ -43,10 +45,6 @@
 	};
 };
 
-&g2d {
-	status = "okay";
-};
-
 &i2c_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -69,7 +67,7 @@
 	samsung,keypad-num-rows = <2>;
 	samsung,keypad-num-columns = <8>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-names = "default";
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	status = "okay";
@@ -135,12 +133,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1";
@@ -182,7 +174,7 @@
 };
 
 &spi_2 {
-	cs-gpios = <&gpc1 2 0>;
+	cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	w25x80@0 {
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index ba34886f8..79d983036 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Trats based on Exynos4210";
@@ -39,7 +40,7 @@
 			regulator-name = "VMEM_VDD_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 0>;
+			gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -48,7 +49,7 @@
 			regulator-name = "TSP_FIXED_VOLTAGES";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpl0 3 0>;
+			gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -57,7 +58,7 @@
 			regulator-name = "8M_AF_2.8V_EN";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk1 1 0>;
+			gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -66,7 +67,7 @@
 			regulator-name = "CAM_IO_EN";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpe2 1 0>;
+			gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -75,7 +76,7 @@
 			regulator-name = "8M_1.2V_EN";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
-			gpio = <&gpe2 5 0>;
+			gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -84,7 +85,7 @@
 			regulator-name = "VT_CORE_1.5V";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
-			gpio = <&gpe2 2 0>;
+			gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -93,29 +94,29 @@
 		compatible = "gpio-keys";
 
 		vol-down-key {
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
 		vol-up-key {
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
 		power-key {
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		ok-key {
-			gpios = <&gpx3 5 1>;
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <352>;
 			label = "ok";
 			debounce-interval = <10>;
@@ -218,7 +219,7 @@
 		compatible = "samsung,s6e8aa0";
 		vdd3-supply = <&vcclcd_reg>;
 		vci-supply = <&vlcd_reg>;
-		reset-gpios = <&gpy4 5 0>;
+		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
@@ -251,6 +252,7 @@
 
 &exynos_usbphy {
 	status = "okay";
+	vbus-supply = <&safe1_sreg>;
 };
 
 &fimd {
@@ -296,6 +298,8 @@
 		compatible = "maxim,max8997-pmic";
 
 		reg = <0x66>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 0>;
 
 		max8997,pmic-buck1-uses-gpio-dvs;
 		max8997,pmic-buck2-uses-gpio-dvs;
@@ -304,9 +308,9 @@
 		max8997,pmic-ignore-gpiodvs-side-effect;
 		max8997,pmic-buck125-default-dvs-idx = <0>;
 
-		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
-						 <&gpx0 6 0>,
-						 <&gpl0 0 0>;
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
+						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
 
 		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
 						 <1250000>, <1200000>,
@@ -357,7 +361,7 @@
 			};
 
 			vusbdac_reg: LDO8 {
-			     regulator-name = "VUSB/VDAC_3.3V_C210";
+			     regulator-name = "VUSB+VDAC_3.3V_C210";
 			     regulator-min-microvolt = <3300000>;
 			     regulator-max-microvolt = <3300000>;
 			};
@@ -448,7 +452,6 @@
 
 			safe1_sreg: ESAFEOUT1 {
 			     regulator-name = "SAFEOUT1";
-			     regulator-always-on;
 			};
 
 			safe2_sreg: ESAFEOUT2 {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 775892b2c..9a75e3eff 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
@@ -65,112 +66,52 @@
 		regulator-name = "VMEM_VDD_2_8V";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe1 3 0>;
+		gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
-	hsotg@12480000 {
-		vusb_d-supply = <&ldo3_reg>;
-		vusb_a-supply = <&ldo8_reg>;
-		dr_mode = "peripheral";
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	sdhci_sd: sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo5_reg>;
-		cd-gpios = <&gpx3 4 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	ehci@12580000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	ohci@12590000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
 		vol-up-key {
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <1>;
 		};
 
 		vol-down-key {
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <1>;
 		};
 
 		config-key {
-			gpios = <&gpx2 2 1>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <171>;
 			label = "config";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		camera-key {
-			gpios = <&gpx2 3 1>;
+			gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <212>;
 			label = "camera";
 			debounce-interval = <1>;
 		};
 
 		power-key {
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		ok-key {
-			gpios = <&gpx3 5 1>;
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <352>;
 			label = "ok";
 			debounce-interval = <1>;
@@ -182,238 +123,26 @@
 		regulator-name = "TSP_2_8V";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 3 0>;
+		gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		tsp@4a {
-			/* TBD: Atmel maXtouch touchscreen */
-			reg = <0x4a>;
-		};
-	};
-
-	i2c@138B0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c5_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		vdd_arm_reg: pmic@60 {
-			compatible = "maxim,max8952";
-			reg = <0x60>;
-
-			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
-			max8952,default-mode = <0>;
-			max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-							<1050000>, <950000>;
-			max8952,sync-freq = <0>;
-			max8952,ramp-speed = <0>;
-
-			regulator-name = "vdd_arm";
-			regulator-min-microvolt = <770000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
-							<&gpx0 6 0>;
-			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
-							<1100000>, <1000000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "LDO6";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VLCD+VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "PS_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VHIC_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_I_HOST_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "CAM_S_ANA_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VCC_3.0V_LCD";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VINT_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VG3D_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "VMEM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ap32khz_reg: EN32KHz-AP {
-					regulator-name = "32KHz AP";
-					regulator-always-on;
-				};
-
-				cp32khz_reg: EN32KHz-CP {
-					regulator-name = "32KHz CP";
-				};
-
-				vichg_reg: ENVICHG {
-					regulator-name = "VICHG";
-				};
-
-				safeout1_reg: ESAFEOUT1 {
-					regulator-name = "SAFEOUT1";
-					regulator-always-on;
-				};
-
-				safeout2_reg: ESAFEOUT2 {
-					regulator-name = "SAFEOUT2";
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
 	spi-lcd {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		gpio-sck = <&gpy3 1 0>;
-		gpio-mosi = <&gpy3 3 0>;
+		gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 0>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
 
 		lcd@0 {
 			compatible = "samsung,ld9040";
 			reg = <0>;
 			vdd3-supply = <&ldo7_reg>;
 			vci-supply = <&ldo17_reg>;
-			reset-gpios = <&gpy4 5 0>;
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 			spi-max-frequency = <1200000>;
 			spi-cpol;
 			spi-cpha;
@@ -446,27 +175,6 @@
 		};
 	};
 
-	fimd: fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-		pinctrl-names = "default";
-		status = "okay";
-		samsung,invert-vden;
-		samsung,invert-vclk;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@3 {
-			reg = <3>;
-			fimd_dpi_ep: endpoint {
-				remote-endpoint = <&lcd_ep>;
-			};
-		};
-	};
-
-	pwm@139D0000 {
-		compatible = "samsung,s5p6440-pwm";
-		status = "okay";
-	};
-
 	camera {
 		status = "okay";
 
@@ -511,13 +219,13 @@
 		regulator-name = "HDMI_5V";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpe0 1 0>;
+		gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
 	hdmi_ddc: i2c-ddc {
 		compatible = "i2c-gpio";
-		gpios = <&gpe4 2 0 &gpe4 3 0>;
+		gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -526,30 +234,288 @@
 		pinctrl-names = "default";
 		status = "okay";
 	};
+};
 
-	mixer@12C10000 {
+&cpu0 {
+	cpu0-supply = <&vdd_arm_reg>;
+};
+
+&ehci {
+	status = "okay";
+	port@0 {
 		status = "okay";
 	};
+};
 
-	hdmi@12D00000 {
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd>;
-		hdmi-en-supply = <&hdmi_en>;
-		vdd-supply = <&ldo3_reg>;
-		vdd_osc-supply = <&ldo4_reg>;
-		vdd_pll-supply = <&ldo3_reg>;
-		ddc = <&hdmi_ddc>;
-		status = "okay";
+&exynos_usbphy {
+	status = "okay";
+	vbus-supply = <&safeout1_reg>;
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+	samsung,invert-vden;
+	samsung,invert-vclk;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@3 {
+		reg = <3>;
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
 	};
+};
 
-	i2c@138E0000 {
-		status = "okay";
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	hdmi-en-supply = <&hdmi_en>;
+	vdd-supply = <&ldo3_reg>;
+	vdd_osc-supply = <&ldo4_reg>;
+	vdd_pll-supply = <&ldo3_reg>;
+	ddc = <&hdmi_ddc>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo3_reg>;
+	vusb_a-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tsp@4a {
+		/* TBD: Atmel maXtouch touchscreen */
+		reg = <0x4a>;
 	};
 };
 
-&cpu0 {
-	cpu0-supply = <&vdd_arm_reg>;
+&i2c_5 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	vdd_arm_reg: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+
+		max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+				    <&gpx0 4 GPIO_ACTIVE_HIGH>;
+		max8952,default-mode = <0>;
+		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+						<1050000>, <950000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <770000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pmic@66 {
+		compatible = "national,lp3974";
+		reg = <0x66>;
+
+		max8998,pmic-buck1-default-dvs-idx = <0>;
+		max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						<&gpx0 6 GPIO_ACTIVE_HIGH>;
+		max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
+						<1100000>, <1000000>;
+
+		max8998,pmic-buck2-default-dvs-idx = <0>;
+		max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
+		max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
+
+		regulators {
+			ldo2_reg: LDO2 {
+				regulator-name = "VALIVE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VUSB+MIPI_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VLCD+VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VCC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "CAM_AF_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "PS_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VHIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "CAM_I_HOST_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "CAM_S_ANA_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VINT_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VG3D_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VCC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ap32khz_reg: EN32KHz-AP {
+				regulator-name = "32KHz AP";
+				regulator-always-on;
+			};
+
+			cp32khz_reg: EN32KHz-CP {
+				regulator-name = "32KHz CP";
+			};
+
+			vichg_reg: ENVICHG {
+				regulator-name = "VICHG";
+			};
+
+			safeout1_reg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safeout2_reg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+};
+
+&mdma1 {
+	reg = <0x12840000 0x1000>;
+};
+
+&mixer {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+	port@0 {
+		status = "okay";
+	};
 };
 
 &pinctrl_1 {
@@ -568,6 +534,50 @@
 	};
 };
 
-&mdma1 {
-	reg = <0x12840000 0x1000>;
+&pwm {
+	compatible = "samsung,s5p6440-pwm";
+	status = "okay";
+};
+
+&sdhci_0 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vemmc_reg>;
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo5_reg>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_1 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_2 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_3 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
 };
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 3e5ba665d..2d9b02967 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -185,8 +185,8 @@
 		interrupts = <0 89 0>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
+		power-domains = <&pd_lcd0>;
 		iommus = <&sysmmu_g2d>;
-		status = "disabled";
 	};
 
 	camera {
@@ -257,6 +257,165 @@
 		power-domains = <&pd_lcd1>;
 		#iommu-cells = <0>;
 	};
+
+	bus_dmc: bus_dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_acp: bus_acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus_peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+	};
+
+	bus_fsys: bus_fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+	};
+
+	bus_display: bus_display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		status = "disabled";
+	};
+
+	bus_lcd0: bus_lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus_leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_rightbus: bus_rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus_mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp@267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	bus_acp_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp@160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_peri_opp_table: opp_table3 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@5000000 {
+			opp-hz = /bits/ 64 <5000000>;
+		};
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
+
+	bus_fsys_opp_table: opp_table4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@10000000 {
+			opp-hz = /bits/ 64 <10000000>;
+		};
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+	};
+
+	bus_display_opp_table: opp_table5 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp@160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+	};
+
+	bus_leftbus_opp_table: opp_table6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp@160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
 };
 
 &gic {
@@ -271,6 +430,10 @@
 		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 };
 
+&mdma1 {
+	power-domains = <&pd_lcd0>;
+};
+
 &pmu_system_controller {
 	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 			"clkout4", "clkout8", "clkout9";
@@ -279,3 +442,11 @@
 		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
 	#clock-cells = <1>;
 };
+
+&rotator {
+	power-domains = <&pd_lcd0>;
+};
+
+&sysmmu_rotator {
+	power-domains = <&pd_lcd0>;
+};
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index d9c8efeef..538901123 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -30,6 +30,9 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA00>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 			cooling-min-level = <13>;
 			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
@@ -39,6 +42,84 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA01>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <200000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <200000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <200000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1037500>;
+			clock-latency-ns = <200000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1087500>;
+			clock-latency-ns = <200000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1137500>;
+			clock-latency-ns = <200000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1187500>;
+			clock-latency-ns = <200000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <200000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1287500>;
+			clock-latency-ns = <200000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1350000>;
+			clock-latency-ns = <200000>;
+			turbo-mode;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ca7d168d1..58ad48e7b 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -11,6 +11,9 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/clock/maxim,max77686.h>
 #include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	chosen {
@@ -30,11 +33,11 @@
 		power_key {
 			interrupt-parent = <&gpx1>;
 			interrupts = <3 0>;
-			gpios = <&gpx1 3 1>;
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -70,7 +73,7 @@
 		pinctrl-0 = <&sd1_cd>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpk1 2 1>;
+		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
 	};
 
 	camera {
@@ -107,6 +110,57 @@
 	};
 };
 
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 /* RSTN signal for eMMC */
 &sd1_cd {
 	samsung,pin-pud = <0>;
@@ -172,12 +226,8 @@
 	assigned-clock-rates = <0>, <176000000>;
 };
 
-&g2d {
-	status = "okay";
-};
-
 &hdmi {
-	hpd-gpio = <&gpx3 7 0>;
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	vdd-supply = <&ldo8_reg>;
@@ -187,6 +237,10 @@
 	status = "okay";
 };
 
+&hdmicec {
+	status = "okay";
+};
+
 &hsotg {
 	dr_mode = "peripheral";
 	status = "okay";
@@ -195,8 +249,6 @@
 };
 
 &i2c_0 {
-	pinctrl-0 = <&i2c0_bus>;
-	pinctrl-names = "default";
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <400000>;
 	status = "okay";
@@ -205,9 +257,9 @@
 		compatible = "smsc,usb3503";
 		reg = <0x08>;
 
-		intn-gpios = <&gpx3 0 0>;
-		connect-gpios = <&gpx3 4 0>;
-		reset-gpios = <&gpx3 5 0>;
+		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 		initial-mode = <1>;
 	};
 
@@ -246,7 +298,6 @@
 				regulator-name = "VDDQ_MMC2_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 				regulator-boot-on;
 			};
 
@@ -272,15 +323,13 @@
 				regulator-always-on;
 			};
 
-			ldo8_reg: ldo@8 {
-				regulator-compatible = "LDO8";
+			ldo8_reg: LDO8 {
 				regulator-name = "VDD10_HDMI_1.0V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 			};
 
-			ldo10_reg: ldo@10 {
-				regulator-compatible = "LDO10";
+			ldo10_reg: LDO10 {
 				regulator-name = "VDDQ_MIPIHSI_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -341,10 +390,18 @@
 			};
 
 			ldo21_reg: LDO21 {
-				regulator-name = "LDO21_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
+				regulator-name = "TFLASH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo22_reg: LDO22 {
+				/*
+				 * Only U3 uses it, so let it define the
+				 * constraints
+				 */
+				regulator-name = "LDO22";
 				regulator-boot-on;
 			};
 
@@ -358,8 +415,8 @@
 
 			buck1_reg: BUCK1 {
 				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
@@ -374,8 +431,8 @@
 
 			buck3_reg: BUCK3 {
 				regulator-name = "vdd_int";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1050000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
@@ -411,17 +468,17 @@
 			};
 
 			buck8_reg: BUCK8 {
+				/*
+				 * Constraints set by specific board: X,
+				 * X2 and U3.
+				 */
 				regulator-name = "BUCK8_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
 			};
 		};
 	};
 };
 
 &i2c_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_bus>;
 	status = "okay";
 	max98090: max98090@10 {
 		compatible = "maxim,max98090";
@@ -436,8 +493,6 @@
 
 &i2c_2 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_bus>;
 };
 
 &i2c_8 {
@@ -461,7 +516,7 @@
 &mshc_0 {
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
-	vmmc-supply = <&ldo20_reg &buck8_reg>;
+	vmmc-supply = <&ldo20_reg>;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	status = "okay";
 
@@ -485,8 +540,9 @@
 	bus-width = <4>;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 	pinctrl-names = "default";
-	vmmc-supply = <&ldo4_reg &ldo21_reg>;
-	cd-gpios = <&gpk2 2 0>;
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
+	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 44684e57e..d73aa6c58 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -26,11 +26,72 @@
 		compatible = "gpio-leds";
 		led1 {
 			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
+			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 10000 0>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 102 170 230>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     trip = <&cpu_alert1>;
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     trip = <&cpu_alert2>;
+				     cooling-device = <&cpu0 13 13>;
+				};
+				map2 {
+				     trip = <&cpu_alert0>;
+				     cooling-device = <&fan0 0 1>;
+				};
+				map3 {
+				     trip = <&cpu_alert1>;
+				     cooling-device = <&fan0 1 2>;
+				};
+				map4 {
+				     trip = <&cpu_alert2>;
+				     cooling-device = <&fan0 2 3>;
+				};
+			};
+		};
+	};
+};
+
+/* Supply for LAN9730/SMSC95xx */
+&buck8_reg {
+	regulator-name = "BUCK8_P3V3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+/* VDDQ for MSHC (eMMC card) */
+&ldo22_reg {
+	regulator-name = "LDO22_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&mshc_0 {
+	vqmmc-supply = <&ldo22_reg>;
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+	status = "okay";
 };
 
 &usb3503 {
@@ -61,3 +122,10 @@
 		"Speakers", "SPKL",
 		"Speakers", "SPKR";
 };
+
+&spi_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_bus>;
+	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 679ac103e..2af235151 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -26,13 +26,13 @@
 		compatible = "gpio-leds";
 		led1 {
 			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
+			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 		led2 {
 			label = "led2:mmc0";
-			gpios = <&gpc1 2 1>;
+			gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "mmc0";
 		};
@@ -44,11 +44,11 @@
 		home_key {
 			interrupt-parent = <&gpx2>;
 			interrupts = <2 0>;
-			gpios = <&gpx2 2 0>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_HOME>;
 			label = "home key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -57,18 +57,29 @@
 		regulator-name = "p3v3_en";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpa1 1 1>;
+		gpio = <&gpa1 1 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 		regulator-always-on;
 	};
 };
 
+/* VDDQ for MSHC (eMMC card) */
+&buck8_reg {
+	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
 &ehci {
 	port@1 {
 		status = "okay";
 	};
 };
 
+&mshc_0 {
+	vqmmc-supply = <&buck8_reg>;
+};
+
 &pinctrl_1 {
 	gpio_home_key: home_key {
 		samsung,pins = "gpx2-2";
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
index 6e3367856..3e3584270 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -22,6 +22,17 @@
 	};
 };
 
+/* VDDQ for MSHC (eMMC card) */
+&buck8_reg {
+	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&mshc_0 {
+	vqmmc-supply = <&buck8_reg>;
+};
+
 &sound {
 	simple-audio-card,name = "Odroid-X2";
 	simple-audio-card,widgets =
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 84c76310b..26a36fed9 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -14,7 +14,9 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4412";
@@ -45,7 +47,7 @@
 			regulator-name = "VMEM_VDD_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
+			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -78,13 +80,29 @@
 	};
 };
 
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-	pinctrl-names = "default";
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&exynos_usbphy {
 	status = "okay";
 };
 
-&g2d {
+&ehci {
+	samsung,vbus-gpio = <&gpx3 5 1>;
+	status = "okay";
+
+	port@1{
+		status = "okay";
+	};
+	port@2 {
+		status = "okay";
+	};
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
@@ -103,13 +121,13 @@
 
 		s5m8767,pmic-buck-default-dvs-idx = <3>;
 
-		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
-						 <&gpx2 4 0>,
-						 <&gpx2 5 0>;
+		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 4 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 5 GPIO_ACTIVE_HIGH>;
 
-		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
-						<&gpm3 6 0>,
-						<&gpm3 7 0>;
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+						<&gpm3 6 GPIO_ACTIVE_HIGH>,
+						<&gpm3 7 GPIO_ACTIVE_HIGH>;
 
 		s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
 						 <1200000>, <1200000>,
@@ -422,7 +440,7 @@
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <2>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -464,12 +482,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &mshc_0 {
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
new file mode 100644
index 000000000..16e4b77d8
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Device tree sources for Exynos4412 PPMU common device tree
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&ppmu_dmc0 {
+       status = "okay";
+
+       events {
+	       ppmu_dmc0_3: ppmu-event3-dmc0 {
+		       event-name = "ppmu-event3-dmc0";
+	       };
+       };
+};
+
+&ppmu_dmc1 {
+       status = "okay";
+
+       events {
+	       ppmu_dmc1_3: ppmu-event3-dmc1 {
+		       event-name = "ppmu-event3-dmc1";
+	       };
+       };
+};
+
+&ppmu_leftbus {
+       status = "okay";
+
+       events {
+	       ppmu_leftbus_3: ppmu-event3-leftbus {
+		       event-name = "ppmu-event3-leftbus";
+	       };
+       };
+};
+
+&ppmu_rightbus {
+       status = "okay";
+
+       events {
+	       ppmu_rightbus_3: ppmu-event3-rightbus {
+		       event-name = "ppmu-event3-rightbus";
+	       };
+       };
+};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index c2421df1f..231ffbdbf 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Samsung SMDK evaluation board based on Exynos4412";
@@ -41,15 +42,11 @@
 	};
 };
 
-&g2d {
-	status = "okay";
-};
-
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <8>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -115,12 +112,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 525684ca8..4840bbdaa 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "FriendlyARM TINY4412 board based on Exynos4412";
@@ -31,26 +32,26 @@
 
 		led1 {
 			label = "led1";
-			gpios = <&gpm4 0 1>;
+			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
 		};
 
 		led2 {
 			label = "led2";
-			gpios = <&gpm4 1 1>;
+			gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		led3 {
 			label = "led3";
-			gpios = <&gpm4 2 1>;
+			gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		led4 {
 			label = "led4";
-			gpios = <&gpm4 3 1>;
+			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index afc199d78..129e973a0 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77686.h>
@@ -65,7 +66,7 @@
 			regulator-name = "CAM_SENSOR_A";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 2 0>;
+			gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -74,7 +75,7 @@
 			regulator-name = "LCD_VDD_2.2V";
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
-			gpio = <&gpc0 1 0>;
+			gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -83,7 +84,7 @@
 			regulator-name = "CAM_AF";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 4 0>;
+			gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -92,7 +93,7 @@
 			regulator-name = "LED_A_3.0V";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
-			gpio = <&gpj0 5 0>;
+			gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -101,33 +102,33 @@
 		compatible = "gpio-keys";
 
 		key-down {
-			gpios = <&gpx3 3 1>;
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
 		key-up {
-			gpios = <&gpx2 2 1>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
 		key-power {
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key-ok {
-			gpios = <&gpx0 1 1>;
+			gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 			linux,code = <139>;
 			label = "ok";
 			debounce-inteval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -146,13 +147,13 @@
 			reg = <0x66>;
 
 			regulators {
-				esafeout1_reg: ESAFEOUT1@1 {
+				esafeout1_reg: ESAFEOUT1 {
 					regulator-name = "ESAFEOUT1";
 				};
-				esafeout2_reg: ESAFEOUT2@2 {
+				esafeout2_reg: ESAFEOUT2 {
 					regulator-name = "ESAFEOUT2";
 				};
-				charger_reg: CHARGER@0 {
+				charger_reg: CHARGER {
 					regulator-name = "CHARGER";
 					regulator-min-microamp = <60000>;
 					regulator-max-microamp = <2580000>;
@@ -190,12 +191,15 @@
 			interrupt-parent = <&gpx2>;
 			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 			reg = <0x36>;
+
+			maxim,over-heat-temp = <700>;
+			maxim,over-volt = <4500>;
 		};
 	};
 
 	i2c_ak8975: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
+		gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -204,13 +208,13 @@
 		ak8975@0c {
 			compatible = "asahi-kasei,ak8975";
 			reg = <0x0c>;
-			gpios = <&gpj0 7 0>;
+			gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	i2c_cm36651: i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
+		gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -248,16 +252,16 @@
 			"SPK", "SPKOUTRP";
 	};
 
-	thermistor-ap@0 {
-		compatible = "ntc,ncp15wb473";
+	thermistor-ap {
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
 		pullup-ohm = <100000>;	 /* 100K */
 		pulldown-ohm = <100000>; /* 100K */
 		io-channels = <&adc 1>;  /* AP temperature */
 	};
 
-	thermistor-battery@1 {
-		compatible = "ntc,ncp15wb473";
+	thermistor-battery {
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
 		pullup-ohm = <100000>;	 /* 100K */
 		pulldown-ohm = <100000>; /* 100K */
@@ -285,6 +289,57 @@
 	status = "okay";
 };
 
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &csis_0 {
 	status = "okay";
 	vddcore-supply = <&ldo8_reg>;
@@ -352,7 +407,7 @@
 		reg = <0>;
 		vdd3-supply = <&lcd_vdd3_reg>;
 		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpy4 5 0>;
+		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
@@ -384,6 +439,7 @@
 };
 
 &exynos_usbphy {
+	vbus-supply = <&esafeout1_reg>;
 	status = "okay";
 };
 
@@ -439,7 +495,7 @@
 			clocks = <&camera 1>;
 			clock-names = "extclk";
 			samsung,camclk-out = <1>;
-			gpios = <&gpm1 6 0>;
+			gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 
 			port {
 				is_s5k6a3_ep: endpoint {
@@ -481,8 +537,8 @@
 	s5c73m3@3c {
 		compatible = "samsung,s5c73m3";
 		reg = <0x3c>;
-		standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
-		xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+		standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
+		xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 		vdd-int-supply = <&buck9_reg>;
 		vddio-cis-supply = <&ldo9_reg>;
 		vdda-supply = <&ldo17_reg>;
@@ -557,16 +613,14 @@
 		#clock-cells = <1>;
 
 		voltage-regulators {
-			ldo1_reg: ldo1 {
-				regulator-compatible = "LDO1";
+			ldo1_reg: LDO1 {
 				regulator-name = "VALIVE_1.0V_AP";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
 			};
 
-			ldo2_reg: ldo2 {
-				regulator-compatible = "LDO2";
+			ldo2_reg: LDO2 {
 				regulator-name = "VM1M2_1.2V_AP";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -576,32 +630,28 @@
 				};
 			};
 
-			ldo3_reg: ldo3 {
-				regulator-compatible = "LDO3";
+			ldo3_reg: LDO3 {
 				regulator-name = "VCC_1.8V_AP";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
-			ldo4_reg: ldo4 {
-				regulator-compatible = "LDO4";
+			ldo4_reg: LDO4 {
 				regulator-name = "VCC_2.8V_AP";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
 			};
 
-			ldo5_reg: ldo5 {
-				regulator-compatible = "LDO5";
+			ldo5_reg: LDO5 {
 				regulator-name = "VCC_1.8V_IO";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
-			ldo6_reg: ldo6 {
-				regulator-compatible = "LDO6";
+			ldo6_reg: LDO6 {
 				regulator-name = "VMPLL_1.0V_AP";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
@@ -611,8 +661,7 @@
 				};
 			};
 
-			ldo7_reg: ldo7 {
-				regulator-compatible = "LDO7";
+			ldo7_reg: LDO7 {
 				regulator-name = "VPLL_1.0V_AP";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
@@ -622,8 +671,7 @@
 				};
 			};
 
-			ldo8_reg: ldo8 {
-				regulator-compatible = "LDO8";
+			ldo8_reg: LDO8 {
 				regulator-name = "VMIPI_1.0V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
@@ -632,15 +680,13 @@
 				};
 			};
 
-			ldo9_reg: ldo9 {
-				regulator-compatible = "LDO9";
+			ldo9_reg: LDO9 {
 				regulator-name = "CAM_ISP_MIPI_1.2V";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 			};
 
-			ldo10_reg: ldo10 {
-				regulator-compatible = "LDO10";
+			ldo10_reg: LDO10 {
 				regulator-name = "VMIPI_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -649,8 +695,7 @@
 				};
 			};
 
-			ldo11_reg: ldo11 {
-				regulator-compatible = "LDO11";
+			ldo11_reg: LDO11 {
 				regulator-name = "VABB1_1.95V";
 				regulator-min-microvolt = <1950000>;
 				regulator-max-microvolt = <1950000>;
@@ -660,8 +705,7 @@
 				};
 			};
 
-			ldo12_reg: ldo12 {
-				regulator-compatible = "LDO12";
+			ldo12_reg: LDO12 {
 				regulator-name = "VUOTG_3.0V";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
@@ -670,15 +714,13 @@
 				};
 			};
 
-			ldo13_reg: ldo13 {
-				regulator-compatible = "LDO13";
+			ldo13_reg: LDO13 {
 				regulator-name = "NFC_AVDD_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo14_reg: ldo14 {
-				regulator-compatible = "LDO14";
+			ldo14_reg: LDO14 {
 				regulator-name = "VABB2_1.95V";
 				regulator-min-microvolt = <1950000>;
 				regulator-max-microvolt = <1950000>;
@@ -688,8 +730,7 @@
 				};
 			};
 
-			ldo15_reg: ldo15 {
-				regulator-compatible = "LDO15";
+			ldo15_reg: LDO15 {
 				regulator-name = "VHSIC_1.0V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
@@ -698,8 +739,7 @@
 				};
 			};
 
-			ldo16_reg: ldo16 {
-				regulator-compatible = "LDO16";
+			ldo16_reg: LDO16 {
 				regulator-name = "VHSIC_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -708,80 +748,69 @@
 				};
 			};
 
-			ldo17_reg: ldo17 {
-				regulator-compatible = "LDO17";
+			ldo17_reg: LDO17 {
 				regulator-name = "CAM_SENSOR_CORE_1.2V";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 			};
 
-			ldo18_reg: ldo18 {
-				regulator-compatible = "LDO18";
+			ldo18_reg: LDO18 {
 				regulator-name = "CAM_ISP_SEN_IO_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo19_reg: ldo19 {
-				regulator-compatible = "LDO19";
+			ldo19_reg: LDO19 {
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo20_reg: ldo20 {
-				regulator-compatible = "LDO20";
+			ldo20_reg: LDO20 {
 				regulator-name = "VDDQ_PRE_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo21_reg: ldo21 {
-				regulator-compatible = "LDO21";
+			ldo21_reg: LDO21 {
 				regulator-name = "VTF_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 			};
 
-			ldo22_reg: ldo22 {
-				regulator-compatible = "LDO22";
+			ldo22_reg: LDO22 {
 				regulator-name = "VMEM_VDD_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
-			ldo23_reg: ldo23 {
-				regulator-compatible = "LDO23";
+			ldo23_reg: LDO23 {
 				regulator-name = "TSP_AVDD_3.3V";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo24_reg: ldo24 {
-				regulator-compatible = "LDO24";
+			ldo24_reg: LDO24 {
 				regulator-name = "TSP_VDD_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo25_reg: ldo25 {
-				regulator-compatible = "LDO25";
+			ldo25_reg: LDO25 {
 				regulator-name = "LCD_VCC_3.3V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 			};
 
-			ldo26_reg: ldo26 {
-				regulator-compatible = "LDO26";
+			ldo26_reg: LDO26 {
 				regulator-name = "MOTOR_VCC_3.0V";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 			};
 
-			buck1_reg: buck1 {
-				regulator-compatible = "BUCK1";
+			buck1_reg: BUCK1 {
 				regulator-name = "vdd_mif";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1100000>;
@@ -792,8 +821,7 @@
 				};
 			};
 
-			buck2_reg: buck2 {
-				regulator-compatible = "BUCK2";
+			buck2_reg: BUCK2 {
 				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1500000>;
@@ -804,8 +832,7 @@
 				};
 			};
 
-			buck3_reg: buck3 {
-				regulator-compatible = "BUCK3";
+			buck3_reg: BUCK3 {
 				regulator-name = "vdd_int";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
@@ -816,8 +843,7 @@
 				};
 			};
 
-			buck4_reg: buck4 {
-				regulator-compatible = "BUCK4";
+			buck4_reg: BUCK4 {
 				regulator-name = "vdd_g3d";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
@@ -827,40 +853,35 @@
 				};
 			};
 
-			buck5_reg: buck5 {
-				regulator-compatible = "BUCK5";
+			buck5_reg: BUCK5 {
 				regulator-name = "VMEM_1.2V_AP";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 			};
 
-			buck6_reg: buck6 {
-				regulator-compatible = "BUCK6";
+			buck6_reg: BUCK6 {
 				regulator-name = "VCC_SUB_1.35V";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 			};
 
-			buck7_reg: buck7 {
-				regulator-compatible = "BUCK7";
+			buck7_reg: BUCK7 {
 				regulator-name = "VCC_SUB_2.0V";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
 				regulator-always-on;
 			};
 
-			buck8_reg: buck8 {
-				regulator-compatible = "BUCK8";
+			buck8_reg: BUCK8 {
 				regulator-name = "VMEM_VDDF_3.0V";
 				regulator-min-microvolt = <2850000>;
 				regulator-max-microvolt = <2850000>;
 				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
-			buck9_reg: buck9 {
-				regulator-compatible = "BUCK9";
+			buck9_reg: BUCK9 {
 				regulator-name = "CAM_ISP_CORE_1.2V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1200000>;
@@ -898,46 +919,6 @@
 	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 };
 
-&ppmu_dmc0 {
-	status = "okay";
-
-	events {
-		ppmu_dmc0_3: ppmu-event3-dmc0 {
-			event-name = "ppmu-event3-dmc0";
-		};
-	};
-};
-
-&ppmu_dmc1 {
-	status = "okay";
-
-	events {
-		ppmu_dmc1_3: ppmu-event3-dmc1 {
-			event-name = "ppmu-event3-dmc1";
-		};
-	};
-};
-
-&ppmu_leftbus {
-	status = "okay";
-
-	events {
-		ppmu_leftbus_3: ppmu-event3-leftbus {
-			event-name = "ppmu-event3-leftbus";
-		};
-	};
-};
-
-&ppmu_rightbus {
-	status = "okay";
-
-	events {
-		ppmu_rightbus_3: ppmu-event3-rightbus {
-			event-name = "ppmu-event3-rightbus";
-		};
-	};
-};
-
 &pinctrl_0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
@@ -1269,7 +1250,7 @@
 
 &sdhci_2 {
 	bus-width = <4>;
-	cd-gpios = <&gpx3 4 0>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
 	pinctrl-names = "default";
@@ -1296,10 +1277,10 @@
 &spi_1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_bus>;
-	cs-gpios = <&gpb 5 0>;
+	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	s5c73m3_spi: s5c73m3 {
+	s5c73m3_spi: s5c73m3@0 {
 		compatible = "samsung,s5c73m3";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index b78ada70b..40beede46 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -30,6 +30,9 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA00>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 			cooling-min-level = <13>;
 			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
@@ -39,18 +42,99 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA01>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@A02 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA02>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@A03 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA03>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp@300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <200000>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <200000>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <200000>;
+			opp-suspend;
+		};
+		opp@900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1037500>;
+			clock-latency-ns = <200000>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1087500>;
+			clock-latency-ns = <200000>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1137500>;
+			clock-latency-ns = <200000>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1187500>;
+			clock-latency-ns = <200000>;
+		};
+		opp@1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <200000>;
+		};
+		opp@1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1287500>;
+			clock-latency-ns = <200000>;
+		};
+		opp@1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1350000>;
+			clock-latency-ns = <200000>;
+			turbo-mode;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index ad764842f..28b04b679 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -380,7 +380,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index bac25c672..856b29254 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -885,6 +885,13 @@
 			samsung,pin-pud = <0>;
 			samsung,pin-drv = <0>;
 		};
+
+		hdmi_cec: hdmi-cec {
+			samsung,pins = "gpx3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl_2: pinctrl@03860000 {
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index b77dac61f..c452499ae 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -116,7 +116,6 @@
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		iommus = <&sysmmu_g2d>;
-		status = "disabled";
 	};
 
 	camera {
@@ -180,7 +179,7 @@
 			ranges;
 			status = "disabled";
 
-			pmu {
+			pmu@10020000 {
 				reg = <0x10020000 0x3000>;
 			};
 
@@ -282,6 +281,180 @@
 		clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
 		#iommu-cells = <0>;
 	};
+
+	bus_dmc: bus_dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_acp: bus_acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+	};
+
+	bus_c2c: bus_c2c {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_C2C>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <950000>;
+		};
+		opp@400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+
+	bus_acp_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp@160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp@267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+		};
+	};
+
+	bus_leftbus: bus_leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_rightbus: bus_rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_display: bus_display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		status = "disabled";
+	};
+
+	bus_fsys: bus_fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus_peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus_mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus_opp_table: opp_table3 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <925000>;
+		};
+		opp@160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <950000>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
+	bus_display_opp_table: opp_table4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp@200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_fsys_opp_table: opp_table5 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp@134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+	};
+
+	bus_peri_opp_table: opp_table6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+		};
+		opp@100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
 };
 
 &combiner {
@@ -339,6 +512,10 @@
 	compatible = "samsung,exynos4212-jpeg";
 };
 
+&rotator {
+	compatible = "samsung,exynos4212-rotator";
+};
+
 &mixer {
 	compatible = "samsung,exynos4212-mixer";
 	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 110dbd4fb..cab91782e 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -14,97 +14,166 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
 		serial0 = &serial_0;
 		serial1 = &serial_1;
 		serial2 = &serial_2;
 		serial3 = &serial_3;
 	};
 
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
 
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		samsung,combiner-nr = <32>;
-		reg = <0x10440000 0x1000>;
-		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-	};
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
 
-	gic: interrupt-controller@10481000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x10481000 0x1000>,
-			<0x10482000 0x1000>,
-			<0x10484000 0x2000>,
-			<0x10486000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
+		sromc: memory-controller@12250000 {
+			compatible = "samsung,exynos4210-srom";
+			reg = <0x12250000 0x14>;
+		};
 
-	serial_0: serial@12C00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-	};
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			samsung,combiner-nr = <32>;
+			reg = <0x10440000 0x1000>;
+			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+		};
 
-	serial_1: serial@12C10000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C10000 0x100>;
-		interrupts = <0 52 0>;
-	};
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg =	<0x10481000 0x1000>,
+				<0x10482000 0x1000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
 
-	serial_2: serial@12C20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C20000 0x100>;
-		interrupts = <0 53 0>;
-	};
+		sysreg_system_controller: syscon@10050000 {
+			compatible = "samsung,exynos5-sysreg", "syscon";
+			reg = <0x10050000 0x5000>;
+		};
 
-	serial_3: serial@12C30000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C30000 0x100>;
-		interrupts = <0 54 0>;
-	};
+		serial_0: serial@12C00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <0 51 0>;
+		};
 
-	rtc: rtc@101E0000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x101E0000 0x100>;
-		interrupts = <0 43 0>, <0 44 0>;
-		status = "disabled";
-	};
+		serial_1: serial@12C10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <0 52 0>;
+		};
 
-	fimd: fimd@14400000 {
-		compatible = "samsung,exynos5250-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x14400000 0x40000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <18 4>, <18 5>, <18 6>;
-		samsung,sysreg = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		serial_2: serial@12C20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <0 53 0>;
+		};
 
-	dp: dp-controller@145B0000 {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145B0000 0x1000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
+		serial_3: serial@12C30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C30000 0x100>;
+			interrupts = <0 54 0>;
+		};
+
+		i2c_0: i2c@12C60000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C60000 0x100>;
+			interrupts = <0 56 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@12C70000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C70000 0x100>;
+			interrupts = <0 57 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@12C80000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C80000 0x100>;
+			interrupts = <0 58 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@12C90000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C90000 0x100>;
+			interrupts = <0 59 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		pwm: pwm@12DD0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x12DD0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+		};
+
+		rtc: rtc@101E0000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x101E0000 0x100>;
+			interrupts = <0 43 0>, <0 44 0>;
+			status = "disabled";
+		};
+
+		fimd: fimd@14400000 {
+			compatible = "samsung,exynos5250-fimd";
+			interrupt-parent = <&combiner>;
+			reg = <0x14400000 0x40000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <18 4>, <18 5>, <18 6>;
+			samsung,sysreg = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		dp: dp-controller@145B0000 {
+			compatible = "samsung,exynos5-dp";
+			reg = <0x145B0000 0x1000>;
+			interrupts = <10 3>;
+			interrupt-parent = <&combiner>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7e728a1b5..ea70603f6 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -14,6 +14,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -34,42 +35,42 @@
 			label = "SW-TACT2";
 			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		home {
 			label = "SW-TACT3";
 			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		up {
 			label = "SW-TACT4";
 			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		down {
 			label = "SW-TACT5";
 			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back {
 			label = "SW-TACT6";
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		wakeup {
 			label = "SW-TACT7";
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -117,23 +118,21 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &dp {
 	status = "okay";
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <4>;
-};
-
-&fimd {
-	status = "okay";
 
 	display-timings {
 		native-mode = <&timing0>;
 
-		timing0: timing@0 {
+		timing0: timing {
 			/* 2560x1600 DP panel */
 			clock-frequency = <50000>;
 			hactive = <2560>;
@@ -148,6 +147,10 @@
 	};
 };
 
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
 	vdd_osc-supply = <&ldo10_reg>;
@@ -513,11 +516,6 @@
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 886cfca04..880917e50 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -12,807 +12,805 @@
  * published by the Free Software Foundation.
 */
 
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_hs_bus: i2c2-hs-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_hs_bus: i2c3-hs-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_hs_bus: i2c0-hs-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_hs_bus: i2c1-hs-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpc4-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpc4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpc4-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpc4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13400000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph1: gph1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpe0-6", "gpe1-0";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0", "gpg2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a: cam-port-a {
-			samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
-				       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
-				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@10d10000 {
-		gpv0: gpv0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv1: gpv1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv2: gpv2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv3: gpv3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv4: gpv4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		c2c_rxd: c2c-rxd {
-			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-				       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-				       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		c2c_txd: c2c-txd {
-			samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-				       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-				       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+			     <26 0>, <26 1>, <27 0>, <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+			     <30 0>, <30 1>, <31 0>, <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_hs_bus: i2c2-hs-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_hs_bus: i2c3-hs-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ac97_bus: ac97-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_hs_bus: i2c0-hs-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_hs_bus: i2c1-hs-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus8: sd2-bus-width8 {
+		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_clk: sd3-clk {
+		samsung,pins = "gpc4-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cmd: sd3-cmd {
+		samsung,pins = "gpc4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cd: sd3-cd {
+		samsung,pins = "gpc4-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus1: sd3-bus-width1 {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus4: sd3-bus-width4 {
+		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd: dp_hpd {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			       "gpe1-0", "gpe1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c2_bus: cam-i2c2-bus {
+		samsung,pins = "gpe0-6", "gpe1-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_bayrgb_bus: cam-bayrgb-bus {
+		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+			       "gpg2-0", "gpg2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_a: cam-port-a {
+		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	c2c_rxd: c2c-rxd {
+		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+			       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	c2c_txd: c2c-txd {
+		samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+			       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 4fe186d01..381af134c 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
@@ -29,7 +30,7 @@
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
-	vdd: fixed-regulator@0 {
+	vdd: fixed-regulator-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-supply";
 		regulator-min-microvolt = <1800000>;
@@ -37,7 +38,7 @@
 		regulator-always-on;
 	};
 
-	dbvdd: fixed-regulator@1 {
+	dbvdd: fixed-regulator-dbvdd {
 		compatible = "regulator-fixed";
 		regulator-name = "dbvdd-supply";
 		regulator-min-microvolt = <3300000>;
@@ -45,7 +46,7 @@
 		regulator-always-on;
 	};
 
-	spkvdd: fixed-regulator@2 {
+	spkvdd: fixed-regulator-spkvdd {
 		compatible = "regulator-fixed";
 		regulator-name = "spkvdd-supply";
 		regulator-min-microvolt = <5000000>;
@@ -74,10 +75,12 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &dp {
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <4>;
@@ -85,19 +88,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
 	status = "okay";
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
 
 	display-timings {
 		native-mode = <&timing0>;
 
-		timing0: timing@0 {
+		timing0: timing {
 			/* 1280x800 */
 			clock-frequency = <50000>;
 			hactive = <1280>;
@@ -112,6 +107,14 @@
 	};
 };
 
+&ehci {
+	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 };
@@ -193,6 +196,7 @@
 				regulator-name = "P1.8V_LDO_OUT10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
 			ldo11_reg: LDO11 {
@@ -340,11 +344,6 @@
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
new file mode 100644
index 000000000..fadbea744
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -0,0 +1,687 @@
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	aliases {
+		i2c104 = &i2c_104;
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+		stdout-path = "serial3:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	vbat: vbat-fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+	};
+
+	i2c-arbitrator {
+		compatible = "i2c-arb-gpio-challenge";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c_4>;
+
+		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+		slew-delay-us = <10>;
+		wait-retry-us = <3000>;
+		wait-free-us = <50000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
+		/* Use ID 104 as a hint that we're on physical bus 4 */
+		i2c_104: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+
+			cros_ec: embedded-controller@1e {
+				compatible = "google,cros-ec-i2c";
+				reg = <0x1e>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-parent = <&gpx1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ec_irq>;
+				wakeup-source;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					dcdc1 {
+						ti,enable-ext-control;
+					};
+					dcdc2 {
+						ti,enable-ext-control;
+					};
+					dcdc3 {
+						ti,enable-ext-control;
+					};
+					fet1: fet1 {
+						regulator-name = "vcd_led";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet4 {
+						regulator-name = "sdcard";
+						ti,overcurrent-wait = <3>;
+					};
+					fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet6: fet6 {
+						regulator-name = "lcd_vdd";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					ldo1 {
+					};
+					ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+
+	sound {
+		samsung,i2s-controller = <&i2s0>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_en>;
+		enable-active-high;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
+			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port {
+			dp_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	phy = <&hdmiphy>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	max77686: max77686@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.8V_LDO_OUT2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.35V_BUCK_OUT6";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "P2.0V_BUCK_OUT7";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "P2.85V_BUCK_OUT8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	trackpad@67 {
+		reg = <0x67>;
+		compatible = "cypress,cyapa";
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+	};
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	ptn3460: lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+		edid-emulation = <5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	hdmiphy: hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	non-removable;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
+	cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+	status = "okay";
+	num-slots = <1>;
+	non-removable;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+};
+
+&pinctrl_0 {
+	wifi_en: wifi-en {
+		samsung,pins = "gpx0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	wifi_rst: wifi-rst {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus_en: usb3-vbus-en {
+		samsung,pins = "gpx2-7";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	arb_their_claim: arb-their-claim {
+		samsung,pins = "gpe0-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	arb_our_claim: arb-our-claim {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+	samsung,pin-pud = <3>;
+	samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb3_vbus_reg>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
new file mode 100644
index 000000000..f811dc800
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -0,0 +1,47 @@
+/*
+ * Google Snow Rev 5+ board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5250-snow-common.dtsi"
+
+/ {
+	model = "Google Snow Rev 5+";
+	compatible = "google,snow-rev5", "samsung,exynos5250",
+		"samsung,exynos5";
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,model = "Snow-I2S-MAX98090";
+		samsung,audio-codec = <&max98090>;
+	};
+};
+
+&i2c_7 {
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+	};
+};
+
+&pinctrl_0 {
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index b7f4122df..995c7ce6c 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -9,693 +9,35 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include "exynos5250.dtsi"
+#include "exynos5250-snow-common.dtsi"
 
 / {
 	model = "Google Snow";
-	compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		i2c104 = &i2c_104;
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=tty1";
-		stdout-path = "serial3:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq &lid_irq>;
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-
-	vbat: vbat-fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-	};
-
-	i2c-arbitrator {
-		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@12CA0000}>;
-
-		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
-		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
-		slew-delay-us = <10>;
-		wait-retry-us = <3000>;
-		wait-free-us = <50000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
-		/* Use ID 104 as a hint that we're on physical bus 4 */
-		i2c_104: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-
-			cros_ec: embedded-controller {
-				compatible = "google,cros-ec-i2c";
-				reg = <0x1e>;
-				interrupts = <6 IRQ_TYPE_NONE>;
-				interrupt-parent = <&gpx1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&ec_irq>;
-				wakeup-source;
-			};
-
-			power-regulator {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					dcdc1 {
-						ti,enable-ext-control;
-					};
-					dcdc2 {
-						ti,enable-ext-control;
-					};
-					dcdc3 {
-						ti,enable-ext-control;
-					};
-					fet1: fet1 {
-						regulator-name = "vcd_led";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet4 {
-						regulator-name = "sdcard";
-						ti,overcurrent-wait = <3>;
-					};
-					fet5 {
-						regulator-name = "camout";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet6: fet6 {
-						regulator-name = "lcd_vdd";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					ldo1 {
-					};
-					ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
+	compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
+		"samsung,exynos5";
 
 	sound {
 		compatible = "google,snow-audio-max98095";
 
 		samsung,model = "Snow-I2S-MAX98095";
-		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98095>;
 	};
-
-	usb3_vbus_reg: regulator-usb3 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_en>;
-		enable-active-high;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
-		power-supply = <&fet1>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	panel: panel {
-		compatible = "auo,b116xw03";
-		power-supply = <&fet6>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&bridge_out>;
-			};
-		};
-	};
-
-	mmc3_pwrseq: mmc3_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
-			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-		clock-names = "ext_clock";
-	};
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-
-	ports {
-		port@0 {
-			dp_out: endpoint {
-				remote-endpoint = <&bridge_in>;
-			};
-		};
-	};
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	phy = <&hdmiphy>;
-	ddc = <&i2c_2>;
-	hdmi-en-supply = <&tps65090_fet7>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	max77686: max77686@09 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77686_irq>;
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "P1.0V_LDO_OUT1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "P1.8V_LDO_OUT2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "P1.8V_LDO_OUT3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "P1.1V_LDO_OUT7";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "P1.0V_LDO_OUT8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "P1.8V_LDO_OUT10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "P3.0V_LDO_OUT12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "P1.8V_LDO_OUT14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "P1.0V_LDO_OUT15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "P1.8V_LDO_OUT16";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "P1.8V_BUCK_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "P1.35V_BUCK_OUT6";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "P2.0V_BUCK_OUT7";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "P2.85V_BUCK_OUT8";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	trackpad {
-		reg = <0x67>;
-		compatible = "cypress,cyapa";
-		interrupts = <2 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx1>;
-		wakeup-source;
-	};
-};
-
-/*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
-&i2c2_bus {
-	samsung,pin-pud = <0>;
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
-};
-
-&i2c_3 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_4 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_5 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
 };
 
 &i2c_7 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	ptn3460: lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-		edid-emulation = <5>;
-
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-
-			port@1 {
-				bridge_in: endpoint {
-					remote-endpoint = <&dp_out>;
-				};
-			};
-		};
-	};
-
 	max98095: codec@11 {
 		compatible = "maxim,max98095";
 		reg = <0x11>;
-		pinctrl-0 = <&max98095_en>;
 		pinctrl-names = "default";
+		pinctrl-0 = <&max98095_en>;
 	};
 };
 
-&i2c_8 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	hdmiphy: hdmiphy@38 {
-		compatible = "samsung,exynos4212-hdmiphy";
-		reg = <0x38>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	bus-width = <4>;
-	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
-	cap-sd-highspeed;
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_3 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	mmc-pwrseq = <&mmc3_pwrseq>;
-};
-
 &pinctrl_0 {
-	wifi_en: wifi-en {
-		samsung,pins = "gpx0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	wifi_rst: wifi-rst {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ec_irq: ec-irq {
-		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
 	max98095_en: max98095-en {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <0>;
 		samsung,pin-pud = <3>;
 		samsung,pin-drv = <0>;
 	};
-
-	tps65090_irq: tps65090-irq {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb3_vbus_en: usb3-vbus-en {
-		samsung,pins = "gpx2-7";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	max77686_irq: max77686-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lid_irq: lid-irq {
-		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
 };
-
-&pinctrl_1 {
-	arb_their_claim: arb-their-claim {
-		samsung,pins = "gpe0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	arb_our_claim: arb-our-claim {
-		samsung,pins = "gpf0-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sd3_bus4 {
-	samsung,pin-drv = <0>;
-};
-
-&sd3_clk {
-	samsung,pin-drv = <0>;
-};
-
-&sd3_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
-};
-
-&spi_1 {
-	status = "okay";
-	samsung,spi-src-clk = <0>;
-	num-cs = <1>;
-};
-
-&usbdrd_dwc3 {
-	dr_mode = "host";
-};
-
-&usbdrd_phy {
-	vbus-supply = <&usb3_vbus_reg>;
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index d03f9b8d3..44f4292bf 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -14,6 +14,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Google Spring";
@@ -37,7 +38,7 @@
 			label = "Power";
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -46,7 +47,7 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -65,17 +66,19 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd_gpio>;
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <1>;
-	samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
 };
 
 &ehci {
@@ -379,7 +382,7 @@
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
 
-	cros_ec: embedded-controller {
+	cros_ec: embedded-controller@1e {
 		compatible = "google,cros-ec-i2c";
 		reg = <0x1e>;
 		interrupts = <6 IRQ_TYPE_NONE>;
@@ -422,11 +425,6 @@
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index bf9bee67c..f7357d99b 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -19,7 +19,6 @@
 
 #include <dt-bindings/clock/exynos5250.h>
 #include "exynos5.dtsi"
-#include "exynos5250-pinctrl.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
@@ -38,10 +37,6 @@
 		mshc1 = &mmc_1;
 		mshc2 = &mmc_2;
 		mshc3 = &mmc_3;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
 		i2c4 = &i2c_4;
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
@@ -63,6 +58,28 @@
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 			clock-frequency = <1700000000>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <140000>;
+
+			operating-points = <
+				1700000 1300000
+				1600000 1250000
+				1500000 1225000
+				1400000 1200000
+				1300000 1150000
+				1200000 1125000
+				1100000 1100000
+				1000000 1075000
+				 900000 1050000
+				 800000 1025000
+				 700000 1012500
+				 600000 1000000
+				 500000  975000
+				 400000  950000
+				 300000  937500
+				 200000  925000
+			>;
 			cooling-min-level = <15>;
 			cooling-max-level = <9>;
 			#cooling-cells = <2>; /* min followed by max */
@@ -75,949 +92,896 @@
 		};
 	};
 
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x30000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x30000>;
+	soc: soc {
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x30000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x30000>;
 
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
 
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
+			smp-sysram@2f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x2f000 0x1000>;
+			};
 		};
-	};
 
-	pd_gsc: gsc-power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-		#power-domain-cells = <0>;
-	};
+		pd_gsc: gsc-power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	pd_mfc: mfc-power-domain@10044040 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044040 0x20>;
-		#power-domain-cells = <0>;
-	};
+		pd_mfc: mfc-power-domain@10044040 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044040 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	pd_disp1: disp1-power-domain@100440A0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440A0 0x20>;
-		#power-domain-cells = <0>;
-	};
+		pd_disp1: disp1-power-domain@100440A0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440A0 0x20>;
+			#power-domain-cells = <0>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
+				 <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
+			clock-names = "oscclk", "clk0", "clk1";
+		};
 
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5250-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5250-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
 
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5250-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
-			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5250-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+		};
 
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		/* Unfortunately we need this since some versions of U-Boot
-		 * on Exynos don't set the CNTFRQ register, so we need the
-		 * value from DT.
-		 */
-		clock-frequency = <24000000>;
-	};
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
+			/*
+			 * Unfortunately we need this since some versions
+			 * of U-Boot on Exynos don't set the CNTFRQ register,
+			 * so we need the value from DT.
+			 */
+			clock-frequency = <24000000>;
+		};
 
-	mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
+		mct@101C0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101C0000 0x800>;
+			interrupt-controller;
 			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0x0 0 &combiner 23 3>,
-					<0x1 0 &combiner 23 4>,
-					<0x2 0 &combiner 25 2>,
-					<0x3 0 &combiner 25 3>,
-					<0x4 0 &gic 0 120 0>,
-					<0x5 0 &gic 0 121 0>;
+			interrupt-parent = <&mct_map>;
+			interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+				     <4 0>, <5 0>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+
+			mct_map: mct-map {
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0x0 0 &combiner 23 3>,
+						<0x1 0 &combiner 23 4>,
+						<0x2 0 &combiner 25 2>,
+						<0x3 0 &combiner 25 3>,
+						<0x4 0 &gic 0 120 0>,
+						<0x5 0 &gic 0 121 0>;
+			};
 		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <1 2>, <22 4>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 46 0>;
 
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+		pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupt-parent = <&combiner>;
+			interrupts = <1 2>, <22 4>;
 		};
-	};
-
-	pinctrl_1: pinctrl@13400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
-	};
 
-	pinctrl_2: pinctrl@10d10000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x10d10000 0x1000>;
-		interrupts = <0 50 0>;
-	};
-
-	pinctrl_3: pinctrl@03860000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <0 46 0>;
 
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5250-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
+		};
 
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
+		pinctrl_1: pinctrl@13400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <0 45 0>;
+		};
 
-	watchdog@101D0000 {
-		compatible = "samsung,exynos5250-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <0 50 0>;
+		};
 
-	g2d@10850000 {
-		compatible = "samsung,exynos5250-g2d";
-		reg = <0x10850000 0x1000>;
-		interrupts = <0 91 0>;
-		clocks = <&clock CLK_G2D>;
-		clock-names = "fimg2d";
-		iommus = <&sysmmu_g2d>;
-	};
+		pinctrl_3: pinctrl@03860000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 47 0>;
+		};
 
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v6";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		power-domains = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-	};
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5250-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
 
-	tmu: tmu@10060000 {
-		compatible = "samsung,exynos5250-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		watchdog@101D0000 {
+			compatible = "samsung,exynos5250-wdt";
+			reg = <0x101D0000 0x100>;
+			interrupts = <0 42 0>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
+		g2d@10850000 {
+			compatible = "samsung,exynos5250-g2d";
+			reg = <0x10850000 0x1000>;
+			interrupts = <0 91 0>;
+			clocks = <&clock CLK_G2D>;
+			clock-names = "fimg2d";
+			iommus = <&sysmmu_g2d>;
+		};
 
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 9 9>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 15 15>;
-			       };
-		       };
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v6";
+			reg = <0x11000000 0x10000>;
+			interrupts = <0 96 0>;
+			power-domains = <&pd_mfc>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
 		};
-	};
 
-	sata: sata@122F0000 {
-		compatible = "snps,dwc-ahci";
-		samsung,sata-freq = <66>;
-		reg = <0x122F0000 0x1ff>;
-		interrupts = <0 115 0>;
-		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-		clock-names = "sata", "sclk_sata";
-		phys = <&sata_phy>;
-		phy-names = "sata-phy";
-		status = "disabled";
-	};
+		rotator: rotator@11C00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11C00000 0x64>;
+			interrupts = <0 84 0>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
 
-	sata_phy: sata-phy@12170000 {
-		compatible = "samsung,exynos5250-sata-phy";
-		reg = <0x12170000 0x1ff>;
-		clocks = <&clock CLK_SATA_PHYCTRL>;
-		clock-names = "sata_phyctrl";
-		#phy-cells = <0>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		tmu: tmu@10060000 {
+			compatible = "samsung,exynos5250-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <0 65 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		sata: sata@122F0000 {
+			compatible = "snps,dwc-ahci";
+			samsung,sata-freq = <66>;
+			reg = <0x122F0000 0x1ff>;
+			interrupts = <0 115 0>;
+			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
+			clock-names = "sata", "sclk_sata";
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
 
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		sata_phy: sata-phy@12170000 {
+			compatible = "samsung,exynos5250-sata-phy";
+			reg = <0x12170000 0x1ff>;
+			clocks = <&clock CLK_SATA_PHYCTRL>;
+			clock-names = "sata_phyctrl";
+			#phy-cells = <0>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
 
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		i2c_4: i2c@12CA0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CA0000 0x100>;
+			interrupts = <0 60 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
 
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2c_5: i2c@12CB0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CB0000 0x100>;
+			interrupts = <0 61 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
 
-	i2c_4: i2c@12CA0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CA0000 0x100>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
+		i2c_6: i2c@12CC0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CC0000 0x100>;
+			interrupts = <0 62 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
 
-	i2c_5: i2c@12CB0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CB0000 0x100>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
+		i2c_7: i2c@12CD0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CD0000 0x100>;
+			interrupts = <0 63 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
 
-	i2c_6: i2c@12CC0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CC0000 0x100>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
+		i2c_8: i2c@12CE0000 {
+			compatible = "samsung,s3c2440-hdmiphy-i2c";
+			reg = <0x12CE0000 0x1000>;
+			interrupts = <0 64 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C_HDMI>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
 
-	i2c_7: i2c@12CD0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CD0000 0x100>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
+		i2c_9: i2c@121D0000 {
+			compatible = "samsung,exynos5-sata-phy-i2c";
+			reg = <0x121D0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SATA_PHYI2C>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
 
-	i2c_8: i2c@12CE0000 {
-		compatible = "samsung,s3c2440-hdmiphy-i2c";
-		reg = <0x12CE0000 0x1000>;
-		interrupts = <0 64 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C_HDMI>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d20000 0x100>;
+			interrupts = <0 66 0>;
+			dmas = <&pdma0 5
+				&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+		};
 
-	i2c_9: i2c@121D0000 {
-                compatible = "samsung,exynos5-sata-phy-i2c";
-                reg = <0x121D0000 0x100>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-		clocks = <&clock CLK_SATA_PHYI2C>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d30000 0x100>;
+			interrupts = <0 67 0>;
+			dmas = <&pdma1 5
+				&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+		};
 
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-	};
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d40000 0x100>;
+			interrupts = <0 68 0>;
+			dmas = <&pdma0 7
+				&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+		};
 
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 67 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-	};
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <0 75 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x1000>;
+			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-	};
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <0 76 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x1000>;
+			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x1000>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <0 77 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x1000>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		mmc_3: mmc@12230000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12230000 0x1000>;
+			interrupts = <0 78 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		i2s0: i2s@03830000 {
+			compatible = "samsung,s5pv210-i2s";
+			status = "disabled";
+			reg = <0x03830000 0x100>;
+			dmas = <&pdma0 10
+				&pdma0 9
+				&pdma0 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+		};
 
-	mmc_3: mmc@12230000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12230000 0x1000>;
-		interrupts = <0 78 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		i2s1: i2s@12D60000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12D60000 0x100>;
+			dmas = <&pdma1 12
+				&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+		};
 
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		status = "disabled";
-		reg = <0x03830000 0x100>;
-		dmas = <&pdma0 10
-			&pdma0 9
-			&pdma0 8>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
+		i2s2: i2s@12D70000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12D70000 0x100>;
+			dmas = <&pdma0 12
+				&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+		};
 
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-	};
+		usb_dwc3 {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&clock CLK_USB3>;
+			clock-names = "usbdrd30";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3: dwc3@12000000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <0 72 0>;
+				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
 
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-	};
+		usbdrd_phy: phy@12100000 {
+			compatible = "samsung,exynos5250-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
 
-	usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USB3>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
+		ehci: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <0 71 0>;
 
-		usbdrd_dwc3: dwc3 {
-			compatible = "synopsys,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy_gen 1>;
+			};
 		};
-	};
-
-	usbdrd_phy: phy@12100000 {
-		compatible = "samsung,exynos5250-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
 
-	ehci: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
+		ohci: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <0 71 0>;
 
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy_gen 1>;
+			};
 		};
-	};
 
-	ohci: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
+		usb2_phy_gen: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
 		};
-	};
 
-	usb2_phy_gen: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges;
+
+			pdma0: pdma@121A0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121A0000 0x1000>;
+				interrupts = <0 34 0>;
+				clocks = <&clock CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@121B0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121B0000 0x1000>;
+				interrupts = <0 35 0>;
+				clocks = <&clock CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			mdma0: mdma@10800000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x10800000 0x1000>;
+				interrupts = <0 33 0>;
+				clocks = <&clock CLK_MDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+			};
+
+			mdma1: mdma@11C10000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11C10000 0x1000>;
+				interrupts = <0 124 0>;
+				clocks = <&clock CLK_MDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+			};
+		};
 
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
+		gsc_0:  gsc@13e00000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <0 85 0>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc0>;
+		};
 
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
+		gsc_1:  gsc@13e10000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <0 86 0>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc1>;
 		};
-	};
 
-	gsc_0:  gsc@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc0>;
-	};
+		gsc_2:  gsc@13e20000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e20000 0x1000>;
+			interrupts = <0 87 0>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL2>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc2>;
+		};
 
-	gsc_1:  gsc@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc1>;
-	};
+		gsc_3:  gsc@13e30000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e30000 0x1000>;
+			interrupts = <0 88 0>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL3>;
+			clock-names = "gscl";
+			iommu = <&sysmmu_gsc3>;
+		};
 
-	gsc_2:  gsc@13e20000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e20000 0x1000>;
-		interrupts = <0 87 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL2>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc2>;
-	};
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos4212-hdmi";
+			reg = <0x14530000 0x70000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <0 95 0>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+					"sclk_hdmiphy", "mout_hdmi";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
 
-	gsc_3:  gsc@13e30000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e30000 0x1000>;
-		interrupts = <0 88 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL3>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc3>;
-	};
+		mixer@14450000 {
+			compatible = "samsung,exynos5250-mixer";
+			reg = <0x14450000 0x10000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <0 94 0>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			iommus = <&sysmmu_tv>;
+		};
 
-	hdmi: hdmi {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x70000>;
-		power-domains = <&pd_disp1>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "mout_hdmi";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
+		dp_phy: video-phy {
+			compatible = "samsung,exynos5250-dp-video-phy";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+		};
 
-	mixer {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		power-domains = <&pd_disp1>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			 <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "hdmi", "sclk_hdmi";
-		iommus = <&sysmmu_tv>;
-	};
+		adc: adc@12D10000 {
+			compatible = "samsung,exynos-adc-v1";
+			reg = <0x12D10000 0x100>;
+			interrupts = <0 106 0>;
+			clocks = <&clock CLK_ADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
 
-	dp_phy: video-phy@10040720 {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <0>;
-	};
+		sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <0 112 0>;
+			clocks = <&clock CLK_SSS>;
+			clock-names = "secss";
+		};
 
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x12D10000 0x100>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_ADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		sysmmu_g2d: sysmmu@10A60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
 
-	sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
+		sysmmu_mfc_r: sysmmu@11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_g2d: sysmmu@10A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_l: sysmmu@11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_r: sysmmu@11200000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11200000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <6 2>;
-		power-domains = <&pd_mfc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_rotator: sysmmu@11D40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11D40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_l: sysmmu@11210000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11210000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <8 5>;
-		power-domains = <&pd_mfc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_jpeg: sysmmu@11F20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_rotator: sysmmu@11D40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11D40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_isp: sysmmu@13260000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13260000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ISP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_jpeg: sysmmu@11F20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_drc: sysmmu@13270000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13270000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DRC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_isp: sysmmu@13260000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13260000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_ISP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_fd: sysmmu@132A0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132A0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_FD>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_drc: sysmmu@13270000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13270000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <11 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DRC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_scc: sysmmu@13280000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13280000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 2>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_fd: sysmmu@132A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132A0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 0>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_FD>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_scp: sysmmu@13290000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13290000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_scc: sysmmu@13280000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13280000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 2>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_SCC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_mcuctl: sysmmu@132B0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132B0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_MCU>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_scp: sysmmu@13290000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13290000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_SCP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_odc: sysmmu@132C0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132C0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ODC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_mcuctl: sysmmu@132B0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132B0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_MCU>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_dis0: sysmmu@132D0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132D0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_odc: sysmmu@132C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <11 0>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_ODC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_dis1: sysmmu@132E0000{
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132E0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <9 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_dis0: sysmmu@132D0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132D0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DIS0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_3dnr: sysmmu@132F0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132F0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_dis1: sysmmu@132E0000{
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132E0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <9 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DIS1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_lite0: sysmmu@13C40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_3dnr: sysmmu@132F0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132F0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_3DNR>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_lite1: sysmmu@13C50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C50000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 1>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_lite0: sysmmu@13C40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13C40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 4>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc0: sysmmu@13E80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_lite1: sysmmu@13C50000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13C50000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 1>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc1: sysmmu@13E90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc0: sysmmu@13E80000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E80000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 0>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc2: sysmmu@13EA0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13EA0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc1: sysmmu@13E90000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E90000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc3: sysmmu@13EB0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13EB0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 6>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc2: sysmmu@13EA0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13EA0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 4>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimd1: sysmmu@14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc3: sysmmu@13EB0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13EB0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 6>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
-		#iommu-cells = <0>;
+		sysmmu_tv: sysmmu@14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+			#iommu-cells = <0>;
+		};
 	};
 
-	sysmmu_fimd1: sysmmu@14640000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14640000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 2>;
-		power-domains = <&pd_disp1>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-		#iommu-cells = <0>;
-	};
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
 
-	sysmmu_tv: sysmmu@14650000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14650000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <7 4>;
-		power-domains = <&pd_disp1>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
-		#iommu-cells = <0>;
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 9 9>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 15 15>;
+			       };
+		       };
+		};
 	};
 };
 
@@ -1036,6 +1000,39 @@
 	iommus = <&sysmmu_fimd1>;
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
@@ -1062,3 +1059,5 @@
 	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 	clock-names = "uart", "clk_uart_baud0";
 };
+
+#include "exynos5250-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
new file mode 100644
index 000000000..f6d135245
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -0,0 +1,577 @@
+/*
+ * Hardkernel Odroid XU board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU";
+	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x7ea00000>;
+	};
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	emmc_pwrseq: pwrseq {
+		pinctrl-0 = <&emmc_nrst_pin>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware@02073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+};
+
+&cpu0_thermal {
+	thermal-sensors = <&tmu_cpu0 0>;
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+
+	trips {
+		cpu_alert0: cpu-alert-0 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_alert1: cpu-alert-1 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_alert2: cpu-alert-2 {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device = <&fan0 0 1>;
+		};
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device = <&fan0 1 2>;
+		};
+		map2 {
+			trip = <&cpu_alert2>;
+			cooling-device = <&fan0 2 3>;
+		};
+	};
+};
+
+&hsi2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	usb3503: usb-hub@08 {
+		compatible = "smsc,usb3503";
+		reg = <0x08>;
+
+		intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+		connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>;
+		initial-mode = <1>;
+
+		clock-names = "refclk";
+		clocks = <&pmu_system_controller 0>;
+		refclk-frequency = <24000000>;
+	};
+
+	max77802: pmic@09 {
+		compatible = "maxim,max77802";
+		reg = <0x9>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
+			    <&pmic_dvs_3>;
+		#clock-cells = <1>;
+
+		inl1-supply = <&buck5_reg>;
+		inl2-supply = <&buck7_reg>;
+		inl3-supply = <&buck9_reg>;
+		inl4-supply = <&buck9_reg>;
+		inl5-supply = <&buck9_reg>;
+		inl6-supply = <&buck10_reg>;
+		inl7-supply = <&buck9_reg>;
+		/* inl9 supply is BOOST, not configured here */
+		inl10-supply = <&buck7_reg>;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_mem";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				/* vdd_mmc0 */
+				regulator-name = "vddf_2v85";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "buck9";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "buck10";
+				regulator-min-microvolt = <2950000>;
+				regulator-max-microvolt = <2950000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_alive";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vddq_m1_m2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vddq_gpio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vddq_mmc2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				/* Having it off prevents reboot */
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd18_hsic";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd18_bpll";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vddq_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd10_hdmi";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "ldo9";
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd18_mipi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vddq_mmc01";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				/*
+				 * Having it off prevents accessing MMC after
+				 * reboot with error:
+				 * MMC Device 1: Clock OFF has been failed.
+				 */
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd33_usb3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vddq_abbg0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vddq_abbg1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd10_usb3";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "ldo16";
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "cam_sensor_core";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "ldo18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "ldo19";
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "vdd_mmc0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				/* vdd_mmc2 */
+				regulator-name = "vddf_2v8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "ldo22";
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "dp_p3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "cam_af";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "eth_p3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "usb30_extclk";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "ldo27";
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "ldo28";
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "ldo29";
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "vddq_e1_e2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "ldo31";
+			};
+
+			/* On revisions with ti,ina231 this is sensor VS */
+			ldo32_reg: LDO32 {
+				regulator-name = "vs_power_meter";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "ldo33";
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "ldo34";
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "ldo35";
+			};
+		};
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-pwrseq = <&emmc_pwrseq>;
+	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&ldo20_reg>;
+	vqmmc-supply = <&ldo11_reg>;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
+};
+
+&pinctrl_0 {
+	emmc_nrst_pin: emmc-nrst {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pmic_dvs_3: pmic-dvs-3 {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pmic_dvs_2: pmic-dvs-2 {
+		samsung,pins = "gpx0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pmic_dvs_1: pmic-dvs-1 {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+		samsung,pin-val = <1>;
+	};
+
+	max77802_irq: max77802-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo12_reg>;
+	vdd10-supply = <&ldo15_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo12_reg>;
+	vdd10-supply = <&ldo15_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
new file mode 100644
index 000000000..b58a0f29f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -0,0 +1,616 @@
+/*
+ * Exynos5410 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Hardkernel Co., Ltd.
+ *              http://www.hardkernel.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm5: gpm5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm7: gpm7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy7: gpy7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>,
+		             <24 0>,
+		             <25 0>,
+		             <25 1>,
+		             <26 0>,
+		             <26 1>,
+		             <27 0>,
+		             <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>,
+		             <28 1>,
+		             <29 0>,
+		             <29 1>,
+		             <30 0>,
+		             <30 1>,
+		             <31 0>,
+		             <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_1 {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index be3e02530..777fcf2ed 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5410.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 / {
 	model = "Samsung SMDK5410 board based on EXYNOS5410";
 	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
@@ -61,14 +62,54 @@
 	disable-wp;
 };
 
-&uart0 {
-		status = "okay";
+&pinctrl_0 {
+	srom_ctl: srom-ctl {
+		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	srom_ebi: srom-ebi {
+		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
 };
 
-&uart1 {
-		status = "okay";
+&sromc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+	ethernet@3,0 {
+		compatible = "smsc,lan9115";
+		reg = <3 0 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpx0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		smsc,force-internal-phy;
+
+		samsung,srom-page-mode;
+		samsung,srom-timing = <9 12 1 9 1 1>;
+	};
 };
 
-&uart2 {
-		status = "okay";
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 731eefd23..137f48464 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -13,45 +13,48 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
+#include "exynos54xx.dtsi"
+#include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "samsung,exynos5410", "samsung,exynos5";
 	interrupt-parent = <&gic>;
 
 	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
@@ -65,94 +68,54 @@
 		#size-cells = <1>;
 		ranges;
 
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
 		pmu_system_controller: system-controller@10040000 {
 			compatible = "samsung,exynos5410-pmu", "syscon";
 			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&fin_pll>;
+			#clock-cells = <1>;
 		};
 
-		mct: mct@101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0xB00>;
-			interrupt-parent = <&interrupt_map>;
-			interrupts = <0>, <1>, <2>, <3>,
-				<4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-			clocks = <&fin_pll>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			interrupt_map: interrupt-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
-			};
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5410-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
 		};
 
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
+		tmu_cpu0: tmu@10060000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 65 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
+		tmu_cpu1: tmu@10064000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10064000 0x100>;
+			interrupts = <GIC_SPI 183 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-			smp-sysram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
+		tmu_cpu2: tmu@10068000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10068000 0x100>;
+			interrupts = <GIC_SPI 184 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 		};
 
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5410-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
+		tmu_cpu3: tmu@1006c000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x1006c000 0x100>;
+			interrupts = <GIC_SPI 185 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 		};
 
 		mmc_0: mmc@12200000 {
@@ -191,31 +154,211 @@
 			status = "disabled";
 		};
 
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <0 45 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
 		};
 
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
+		pinctrl_1: pinctrl@14000000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <0 46 0>;
 		};
 
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <0 50 0>;
+		};
+
+		pinctrl_3: pinctrl@03860000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 47 0>;
 		};
 	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmu_cpu1>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmu_cpu2>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+		       thermal-sensors = <&tmu_cpu3>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+	};
+};
+
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
 };
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+	clocks = <&fin_pll>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000
+		  1 0 0x05000000 0x20000
+		  2 0 0x06000000 0x20000
+		  3 0 0x07000000 0x20000>;
+};
+
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_dwc3_1 {
+	interrupts = <GIC_SPI 200 0>;
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+	clocks = <&clock CLK_WDT>;
+	clock-names = "watchdog";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
+#include "exynos5410-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index eeb4ac22c..39a3b8147 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -11,9 +11,12 @@
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
@@ -44,13 +47,21 @@
 
 		wakeup {
 			label = "SW-TACT1";
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 };
@@ -65,13 +76,6 @@
 	s2mps11_pmic@66 {
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
-		s2mps11,buck2-ramp-delay = <12>;
-		s2mps11,buck34-ramp-delay = <12>;
-		s2mps11,buck16-ramp-delay = <12>;
-		s2mps11,buck6-ramp-enable = <1>;
-		s2mps11,buck2-ramp-enable = <1>;
-		s2mps11,buck3-ramp-enable = <1>;
-		s2mps11,buck4-ramp-enable = <1>;
 
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
@@ -343,11 +347,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	broken-cd;
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
new file mode 100644
index 000000000..5c052d7ff
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -0,0 +1,126 @@
+/*
+ * SAMSUNG EXYNOS5420 SoC cpu device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This file provides desired ordering for Exynos5420 and Exynos5800
+ * boards: CPU[0123] being the A15.
+ *
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 8f4d76c5e..fe4e0915c 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -15,6 +15,8 @@
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Google Peach Pit Rev 6+";
@@ -64,7 +66,7 @@
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -73,7 +75,7 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -94,7 +96,7 @@
 		regulator-name = "P5.0V_USB3CON0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
+		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb300_vbus_en>;
 		enable-active-high;
@@ -105,7 +107,7 @@
 		regulator-name = "P5.0V_USB3CON1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
+		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
@@ -143,20 +145,26 @@
 	vdd-supply = <&ldo9_reg>;
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd_gpio>;
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x06>;
 	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
+	hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 
 	ports {
-		port@0 {
+		port {
 			dp_out: endpoint {
 				remote-endpoint = <&bridge_in>;
 			};
@@ -271,7 +279,6 @@
 				regulator-name = "vdd_1v2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -294,7 +301,6 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -316,7 +322,6 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -327,7 +332,6 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -412,7 +416,6 @@
 				regulator-name = "vdd_ldo9";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-mode = <MAX77802_OPMODE_LP>;
@@ -423,7 +426,6 @@
 				regulator-name = "vdd_ldo10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -624,13 +626,20 @@
 		use-external-pwm;
 
 		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			port@0 {
+				reg = <0>;
+
 				bridge_out: endpoint {
 					remote-endpoint = <&panel_in>;
 				};
 			};
 
 			port@1 {
+				reg = <1>;
+
 				bridge_in: endpoint {
 					remote-endpoint = <&dp_out>;
 				};
@@ -690,11 +699,9 @@
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
 	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
@@ -709,10 +716,9 @@
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
+	non-removable;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
@@ -915,6 +921,11 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
@@ -925,7 +936,7 @@
 	status = "okay";
 	num-cs = <1>;
 	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
+	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
 
 	cros_ec: cros-ec@0 {
 		compatible = "google,cros-ec-spi";
@@ -935,6 +946,7 @@
 		pinctrl-0 = <&ec_spi_cs &ec_irq>;
 		reg = <0>;
 		spi-max-frequency = <3125000>;
+		google,has-vbc-nvram;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
@@ -1031,6 +1043,26 @@
 	status = "okay";
 };
 
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 8b153166e..14beb7e07 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -12,711 +12,710 @@
  * published by the Free Software Foundation.
 */
 
-/ {
-	pinctrl@13400000 {
-		gpy7: gpy7 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13410000 {
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_rclk: sd0-rclk {
-			samsung,pins = "gpc0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_int: sd1-int {
-			samsung,pins = "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus8: sd1-bus-width8 {
-			samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-	};
-
-	pinctrl@14000000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj4: gpj4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpf0-4", "gpf0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@14010000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb4: gpb4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_hs_bus: i2c4-hs-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_hs_bus: i2c5-hs-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_hs_bus: i2c6-hs-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_hs_bus: i2c7-hs-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c8_hs_bus: i2c8-hs-bus {
-			samsung,pins = "gpb3-4", "gpb3-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c9_hs_bus: i2c9-hs-bus {
-			samsung,pins = "gpb3-6", "gpb3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c10_hs_bus: i2c10-hs-bus {
-			samsung,pins = "gpb4-0", "gpb4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+&pinctrl_0 {
+	gpy7: gpy7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+			     <26 0>, <26 1>, <27 0>, <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+			     <30 0>, <30 1>, <31 0>, <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	dp_hpd: dp_hpd {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rclk: sd0-rclk {
+		samsung,pins = "gpc0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpc1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_int: sd1-int {
+		samsung,pins = "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_2 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			       "gpe1-0", "gpe1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c2_bus: cam-i2c2-bus {
+		samsung,pins = "gpf0-4", "gpf0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_bayrgb_bus: cam-bayrgb-bus {
+		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+			       "gpg2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c8_hs_bus: i2c8-hs-bus {
+		samsung,pins = "gpb3-4", "gpb3-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c9_hs_bus: i2c9-hs-bus {
+		samsung,pins = "gpb3-6", "gpb3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c10_hs_bus: i2c10-hs-bus {
+		samsung,pins = "gpb4-0", "gpb4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_4 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 98871f972..ed8f34269 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -11,6 +11,9 @@
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Samsung SMDK5420 board based on EXYNOS5420";
@@ -69,7 +72,7 @@
 		regulator-name = "VBUS0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg0 5 0>;
+		gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb300_vbus_en>;
 		enable-active-high;
@@ -80,7 +83,7 @@
 		regulator-name = "VBUS1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg1 4 0>;
+		gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
@@ -88,23 +91,26 @@
 
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <4>;
 	status = "okay";
-};
 
-&fimd {
-	status = "okay";
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: timing@0 {
+		timing0: timing {
 			clock-frequency = <50000>;
 			hactive = <2560>;
 			vactive = <1600>;
@@ -118,9 +124,13 @@
 	};
 };
 
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 0>;
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 };
@@ -131,13 +141,6 @@
 	s2mps11_pmic@66 {
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
-		s2mps11,buck2-ramp-delay = <12>;
-		s2mps11,buck34-ramp-delay = <12>;
-		s2mps11,buck16-ramp-delay = <12>;
-		s2mps11,buck6-ramp-enable = <1>;
-		s2mps11,buck2-ramp-enable = <1>;
-		s2mps11,buck3-ramp-enable = <1>;
-		s2mps11,buck4-ramp-enable = <1>;
 
 		s2mps11_osc: clocks {
 			#clock-cells = <1>;
@@ -352,11 +355,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	broken-cd;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 534f27ceb..00c4cfa54 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -13,11 +13,10 @@
  * published by the Free Software Foundation.
  */
 
+#include "exynos54xx.dtsi"
 #include <dt-bindings/clock/exynos5420.h>
-#include "exynos5.dtsi"
-#include "exynos5420-pinctrl.dtsi"
-
 #include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "samsung,exynos5420", "samsung,exynos5";
@@ -31,14 +30,6 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
 		i2c8 = &hsi2c_8;
 		i2c9 = &hsi2c_9;
 		i2c10 = &hsi2c_10;
@@ -47,1080 +38,1278 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	/*
+	 * The 'cpus' node is not present here but instead it is provided
+	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
+	 */
+
+	soc: soc {
+		cluster_a15_opp_table: opp_table0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+			opp@1800000000 {
+				opp-hz = /bits/ 64 <1800000000>;
+				opp-microvolt = <1250000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1700000000 {
+				opp-hz = /bits/ 64 <1700000000>;
+				opp-microvolt = <1212500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1600000000 {
+				opp-hz = /bits/ 64 <1600000000>;
+				opp-microvolt = <1175000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1500000000 {
+				opp-hz = /bits/ 64 <1500000000>;
+				opp-microvolt = <1137500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1400000000 {
+				opp-hz = /bits/ 64 <1400000000>;
+				opp-microvolt = <1112500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1300000000 {
+				opp-hz = /bits/ 64 <1300000000>;
+				opp-microvolt = <1062500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1200000000 {
+				opp-hz = /bits/ 64 <1200000000>;
+				opp-microvolt = <1037500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1100000000 {
+				opp-hz = /bits/ 64 <1100000000>;
+				opp-microvolt = <1012500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1000000000 {
+				opp-hz = /bits/ 64 <1000000000>;
+				opp-microvolt = < 987500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@900000000 {
+				opp-hz = /bits/ 64 <900000000>;
+				opp-microvolt = < 962500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = < 937500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@700000000 {
+				opp-hz = /bits/ 64 <700000000>;
+				opp-microvolt = < 912500>;
+				clock-latency-ns = <140000>;
+			};
+		};
 
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		cluster_a7_opp_table: opp_table1 {
+			compatible = "operating-points-v2";
+			opp-shared;
+			opp@1300000000 {
+				opp-hz = /bits/ 64 <1300000000>;
+				opp-microvolt = <1275000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1200000000 {
+				opp-hz = /bits/ 64 <1200000000>;
+				opp-microvolt = <1212500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1100000000 {
+				opp-hz = /bits/ 64 <1100000000>;
+				opp-microvolt = <1162500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@1000000000 {
+				opp-hz = /bits/ 64 <1000000000>;
+				opp-microvolt = <1112500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@900000000 {
+				opp-hz = /bits/ 64 <900000000>;
+				opp-microvolt = <1062500>;
+				clock-latency-ns = <140000>;
+			};
+			opp@800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <1025000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@700000000 {
+				opp-hz = /bits/ 64 <700000000>;
+				opp-microvolt = <975000>;
+				clock-latency-ns = <140000>;
+			};
+			opp@600000000 {
+				opp-hz = /bits/ 64 <600000000>;
+				opp-microvolt = <937500>;
+				clock-latency-ns = <140000>;
+			};
 		};
 
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		cci: cci@10d20000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10d20000 0x1000>;
+			ranges = <0x0 0x10d20000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
 		};
 
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5420-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
 		};
 
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5420-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
+				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 		};
 
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v7";
+			reg = <0x11000000 0x10000>;
+			interrupts = <0 96 0>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			power-domains = <&mfc_pd>;
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
 		};
 
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <0 75 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x2000>;
+			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
 		};
 
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <0 76 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x2000>;
+			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
 		};
 
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5420-dw-mshc";
+			interrupts = <0 77 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
 		};
-	};
 
-	cci: cci@10d20000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x10d20000 0x1000>;
-		ranges = <0x0 0x10d20000 0x6000>;
+		nocp_mem0_0: nocp@10CA1000 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1000 0x200>;
+			status = "disabled";
+		};
 
-		cci_control0: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
+		nocp_mem0_1: nocp@10CA1400 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1400 0x200>;
+			status = "disabled";
 		};
-		cci_control1: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
+
+		nocp_mem1_0: nocp@10CA1800 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1800 0x200>;
+			status = "disabled";
 		};
-	};
 
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x54000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x54000>;
+		nocp_mem1_1: nocp@10CA1C00 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1C00 0x200>;
+			status = "disabled";
+		};
 
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
+		nocp_g3d_0: nocp@11A51000 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x11A51000 0x200>;
+			status = "disabled";
 		};
 
-		smp-sysram@53000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x53000 0x1000>;
+		nocp_g3d_1: nocp@11A51400 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x11A51400 0x200>;
+			status = "disabled";
 		};
-	};
 
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5420-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
+		gsc_pd: power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_USER_ACLK300_GSCL>,
+				 <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
+			clock-names = "oscclk", "clk0", "asb0", "asb1";
+		};
 
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5420-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
-			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
+		isp_pd: power-domain@10044020 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044020 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v7";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		power-domains = <&mfc_pd>;
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-	};
+		mfc_pd: power-domain@10044060 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044060 0x20>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_USER_ACLK333>,
+				 <&clock CLK_ACLK333>;
+			clock-names = "oscclk", "clk0","asb0";
+			#power-domain-cells = <0>;
+		};
 
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x2000>;
-		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		msc_pd: power-domain@10044120 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044120 0x20>;
+			#power-domain-cells = <0>;
+		};
 
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x2000>;
-		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		disp_pd: power-domain@100440C0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440C0 0x20>;
+			#power-domain-cells = <0>;
+			clocks = <&clock CLK_FIN_PLL>,
+				 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
+				 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
+				 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
+				 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
+			clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
+		};
 
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5420-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <0 45 0>;
 
-	mct: mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &combiner 23 3>,
-					<1 &combiner 23 4>,
-					<2 &combiner 25 2>,
-					<3 &combiner 25 3>,
-					<4 &gic 0 120 0>,
-					<5 &gic 0 121 0>,
-					<6 &gic 0 122 0>,
-					<7 &gic 0 123 0>,
-					<8 &gic 0 128 0>,
-					<9 &gic 0 129 0>,
-					<10 &gic 0 130 0>,
-					<11 &gic 0 131 0>;
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
 		};
-	};
 
-	gsc_pd: power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
-		clock-names = "asb0", "asb1";
-	};
+		pinctrl_1: pinctrl@13410000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13410000 0x1000>;
+			interrupts = <0 78 0>;
+		};
 
-	isp_pd: power-domain@10044020 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044020 0x20>;
-		#power-domain-cells = <0>;
-	};
+		pinctrl_2: pinctrl@14000000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <0 46 0>;
+		};
 
-	mfc_pd: power-domain@10044060 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044060 0x20>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
-		clock-names = "oscclk", "clk0";
-		#power-domain-cells = <0>;
-	};
+		pinctrl_3: pinctrl@14010000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14010000 0x1000>;
+			interrupts = <0 50 0>;
+		};
 
-	msc_pd: power-domain@10044120 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044120 0x20>;
-		#power-domain-cells = <0>;
-	};
+		pinctrl_4: pinctrl@03860000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 47 0>;
+		};
 
-	disp_pd: power-domain@100440C0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440C0 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>,
-			 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
-			 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
-			 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
-			 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
-		clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
-	};
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges;
+
+			adma: adma@03880000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x03880000 0x1000>;
+				interrupts = <0 110 0>;
+				clocks = <&clock_audss EXYNOS_ADMA>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <6>;
+				#dma-requests = <16>;
+			};
+
+			pdma0: pdma@121A0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121A0000 0x1000>;
+				interrupts = <0 34 0>;
+				clocks = <&clock CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@121B0000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x121B0000 0x1000>;
+				interrupts = <0 35 0>;
+				clocks = <&clock CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			mdma0: mdma@10800000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x10800000 0x1000>;
+				interrupts = <0 33 0>;
+				clocks = <&clock CLK_MDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+			};
+
+			mdma1: mdma@11C10000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11C10000 0x1000>;
+				interrupts = <0 124 0>;
+				clocks = <&clock CLK_MDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <1>;
+				/*
+				 * MDMA1 can support both secure and non-secure
+				 * AXI transactions. When this is enabled in
+				 * the kernel for boards that run in secure
+				 * mode, we are getting imprecise external
+				 * aborts causing the kernel to oops.
+				 */
+				status = "disabled";
+			};
+		};
 
-	pinctrl_0: pinctrl@13400000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
+		i2s0: i2s@03830000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x03830000 0x100>;
+			dmas = <&adma 0
+				&adma 2
+				&adma 1>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			#sound-dai-cells = <1>;
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			status = "disabled";
+		};
 
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+		i2s1: i2s@12D60000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12D60000 0x100>;
+			dmas = <&pdma1 12
+				&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk1";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			status = "disabled";
 		};
-	};
 
-	pinctrl_1: pinctrl@13410000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13410000 0x1000>;
-		interrupts = <0 78 0>;
-	};
+		i2s2: i2s@12D70000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12D70000 0x100>;
+			dmas = <&pdma0 12
+				&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk2";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			status = "disabled";
+		};
 
-	pinctrl_2: pinctrl@14000000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14000000 0x1000>;
-		interrupts = <0 46 0>;
-	};
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d20000 0x100>;
+			interrupts = <0 68 0>;
+			dmas = <&pdma0 5
+				&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
 
-	pinctrl_3: pinctrl@14010000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14010000 0x1000>;
-		interrupts = <0 50 0>;
-	};
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d30000 0x100>;
+			interrupts = <0 69 0>;
+			dmas = <&pdma1 5
+				&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
 
-	pinctrl_4: pinctrl@03860000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d40000 0x100>;
+			interrupts = <0 70 0>;
+			dmas = <&pdma0 7
+				&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
+
+		dp_phy: dp-video-phy {
+			compatible = "samsung,exynos5420-dp-video-phy";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+		};
+
+		mipi_phy: mipi-video-phy {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
 
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		adma: adma@03880000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x03880000 0x1000>;
-			interrupts = <0 110 0>;
-			clocks = <&clock_audss EXYNOS_ADMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <6>;
-			#dma-requests = <16>;
-		};
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-			/*
-			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in the kernel
-			 * for boards that run in secure mode, we are getting
-			 * imprecise external aborts causing the kernel to oops.
-			 */
+		dsi@14500000 {
+			compatible = "samsung,exynos5410-mipi-dsi";
+			reg = <0x14500000 0x10000>;
+			interrupts = <0 82 0>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
+			clock-names = "bus_clk", "pll_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
-	};
 
-	i2s0: i2s@03830000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x03830000 0x100>;
-		dmas = <&adma 0
-			&adma 2
-			&adma 1>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk0";
-		#sound-dai-cells = <1>;
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-		status = "disabled";
-	};
+		adc: adc@12D10000 {
+			compatible = "samsung,exynos-adc-v2";
+			reg = <0x12D10000 0x100>;
+			interrupts = <0 106 0>;
+			clocks = <&clock CLK_TSADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
 
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk1";
-		#sound-dai-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-		status = "disabled";
-	};
+		hsi2c_8: i2c@12E00000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12E00000 0x1000>;
+			interrupts = <0 87 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_hs_bus>;
+			clocks = <&clock CLK_USI4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk2";
-		#sound-dai-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-		status = "disabled";
-	};
+		hsi2c_9: i2c@12E10000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12E10000 0x1000>;
+			interrupts = <0 88 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c9_hs_bus>;
+			clocks = <&clock CLK_USI5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
+		hsi2c_10: i2c@12E20000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12E20000 0x1000>;
+			interrupts = <0 203 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c10_hs_bus>;
+			clocks = <&clock CLK_USI6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 69 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos5420-hdmi";
+			reg = <0x14530000 0x70000>;
+			interrupts = <0 95 0>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				"sclk_hdmiphy", "mout_hdmi";
+			phy = <&hdmiphy>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+			power-domains = <&disp_pd>;
+		};
 
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 70 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
+		hdmiphy: hdmiphy@145D0000 {
+			reg = <0x145D0000 0x20>;
+		};
 
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
+		mixer: mixer@14450000 {
+			compatible = "samsung,exynos5420-mixer";
+			reg = <0x14450000 0x10000>;
+			interrupts = <0 94 0>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			power-domains = <&disp_pd>;
+			iommus = <&sysmmu_tv>;
+		};
 
-	dp_phy: video-phy@10040728 {
-		compatible = "samsung,exynos5420-dp-video-phy";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <0>;
-	};
+		rotator: rotator@11C00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11C00000 0x64>;
+			interrupts = <0 84 0>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
 
-	mipi_phy: video-phy@10040714 {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
+		gsc_0: video-scaler@13e00000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <0 85 0>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl0>;
+		};
 
-	dsi@14500000 {
-		compatible = "samsung,exynos5410-mipi-dsi";
-		reg = <0x14500000 0x10000>;
-		interrupts = <0 82 0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
-		clock-names = "bus_clk", "pll_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
+		gsc_1: video-scaler@13e10000 {
+			compatible = "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <0 86 0>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl1>;
+		};
 
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v2";
-		reg = <0x12D10000 0x100>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		jpeg_0: jpeg@11F50000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11F50000 0x1000>;
+			interrupts = <0 89 0>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG>;
+			iommus = <&sysmmu_jpeg0>;
+		};
 
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		jpeg_1: jpeg@11F60000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11F60000 0x1000>;
+			interrupts = <0 168 0>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG2>;
+			iommus = <&sysmmu_jpeg1>;
+		};
 
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5420-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
 
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		tmu_cpu0: tmu@10060000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <0 65 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		tmu_cpu1: tmu@10064000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10064000 0x100>;
+			interrupts = <0 183 0>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	hsi2c_4: i2c@12CA0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CA0000 0x1000>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_USI0>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		tmu_cpu2: tmu@10068000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+			interrupts = <0 184 0>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	hsi2c_5: i2c@12CB0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CB0000 0x1000>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_USI1>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		tmu_cpu3: tmu@1006c000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+			interrupts = <0 185 0>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	hsi2c_6: i2c@12CC0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CC0000 0x1000>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_USI2>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		tmu_gpu: tmu@100a0000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+			interrupts = <0 215 0>;
+			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
+		};
 
-	hsi2c_7: i2c@12CD0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CD0000 0x1000>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_USI3>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		sysmmu_g2dr: sysmmu@0x10A60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
 
-	hsi2c_8: i2c@12E00000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E00000 0x1000>;
-		interrupts = <0 87 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_USI4>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		sysmmu_g2dw: sysmmu@0x10A70000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A70000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
 
-	hsi2c_9: i2c@12E10000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E10000 0x1000>;
-		interrupts = <0 88 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_USI5>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		sysmmu_tv: sysmmu@0x14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
 
-	hsi2c_10: i2c@12E20000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E20000 0x1000>;
-		interrupts = <0 203 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_USI6>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		sysmmu_gscl0: sysmmu@0x13E80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	hdmi: hdmi@14530000 {
-		compatible = "samsung,exynos5420-hdmi";
-		reg = <0x14530000 0x70000>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-			"sclk_hdmiphy", "mout_hdmi";
-		phy = <&hdmiphy>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-		power-domains = <&disp_pd>;
-	};
+		sysmmu_gscl1: sysmmu@0x13E90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	hdmiphy: hdmiphy@145D0000 {
-		reg = <0x145D0000 0x20>;
-	};
+		sysmmu_scaler0r: sysmmu@0x12880000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12880000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			#iommu-cells = <0>;
+		};
 
-	mixer: mixer@14450000 {
-		compatible = "samsung,exynos5420-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			 <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "hdmi", "sclk_hdmi";
-		power-domains = <&disp_pd>;
-		iommus = <&sysmmu_tv>;
-	};
+		sysmmu_scaler1r: sysmmu@0x12890000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12890000 0x1000>;
+			interrupts = <0 186 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			#iommu-cells = <0>;
+		};
 
-	gsc_0: video-scaler@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		power-domains = <&gsc_pd>;
-		iommus = <&sysmmu_gscl0>;
-	};
+		sysmmu_scaler2r: sysmmu@0x128A0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128A0000 0x1000>;
+			interrupts = <0 188 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			#iommu-cells = <0>;
+		};
 
-	gsc_1: video-scaler@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		power-domains = <&gsc_pd>;
-		iommus = <&sysmmu_gscl1>;
-	};
+		sysmmu_scaler0w: sysmmu@0x128C0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128C0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <27 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			#iommu-cells = <0>;
+		};
 
-	jpeg_0: jpeg@11F50000 {
-		compatible = "samsung,exynos5420-jpeg";
-		reg = <0x11F50000 0x1000>;
-		interrupts = <0 89 0>;
-		clock-names = "jpeg";
-		clocks = <&clock CLK_JPEG>;
-		iommus = <&sysmmu_jpeg0>;
-	};
+		sysmmu_scaler1w: sysmmu@0x128D0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128D0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			#iommu-cells = <0>;
+		};
 
-	jpeg_1: jpeg@11F60000 {
-		compatible = "samsung,exynos5420-jpeg";
-		reg = <0x11F60000 0x1000>;
-		interrupts = <0 168 0>;
-		clock-names = "jpeg";
-		clocks = <&clock CLK_JPEG2>;
-		iommus = <&sysmmu_jpeg1>;
-	};
+		sysmmu_scaler2w: sysmmu@0x128E0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128E0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <19 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			#iommu-cells = <0>;
+		};
 
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5420-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
+		sysmmu_rotator: sysmmu@0x11D40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11D40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
 
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
+		sysmmu_jpeg0: sysmmu@0x11F10000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F10000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
 
-	tmu_cpu0: tmu@10060000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		sysmmu_jpeg1: sysmmu@0x11F20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F20000 0x1000>;
+			interrupts = <0 169 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+			#iommu-cells = <0>;
+		};
 
-	tmu_cpu1: tmu@10064000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10064000 0x100>;
-		interrupts = <0 183 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		sysmmu_mfc_l: sysmmu@0x11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	tmu_cpu2: tmu@10068000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-		interrupts = <0 184 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		sysmmu_mfc_r: sysmmu@0x11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	tmu_cpu3: tmu@1006c000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-		interrupts = <0 185 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		sysmmu_fimd1_0: sysmmu@0x14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
 
-	tmu_gpu: tmu@100a0000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-		interrupts = <0 215 0>;
-		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		sysmmu_fimd1_1: sysmmu@0x14680000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14680000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
 
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			#include "exynos5420-trip-points.dtsi"
+		bus_wcore: bus_wcore {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_wcore_opp_table>;
+			status = "disabled";
 		};
-		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmu_cpu1>;
-		       #include "exynos5420-trip-points.dtsi"
+
+		bus_noc: bus_noc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_noc_opp_table>;
+			status = "disabled";
 		};
-		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmu_cpu2>;
-		       #include "exynos5420-trip-points.dtsi"
+
+		bus_fsys_apb: bus_fsys_apb {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_fsys_apb_opp_table>;
+			status = "disabled";
 		};
-		cpu3_thermal: cpu3-thermal {
-		       thermal-sensors = <&tmu_cpu3>;
-		       #include "exynos5420-trip-points.dtsi"
+
+		bus_fsys: bus_fsys {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_fsys_apb_opp_table>;
+			status = "disabled";
 		};
-		gpu_thermal: gpu-thermal {
-		       thermal-sensors = <&tmu_gpu>;
-		       #include "exynos5420-trip-points.dtsi"
+
+		bus_fsys2: bus_fsys2 {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_fsys2_opp_table>;
+			status = "disabled";
 		};
-	};
 
-        watchdog: watchdog@101D0000 {
-		compatible = "samsung,exynos5420-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-        };
-
-	sss: sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
+		bus_mfc: bus_mfc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK333>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_mfc_opp_table>;
+			status = "disabled";
+		};
 
-	usbdrd3_0: usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD300>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbdrd_dwc3_0: dwc3 {
-			compatible = "snps,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+		bus_gen: bus_gen {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK266>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_gen_opp_table>;
+			status = "disabled";
 		};
-	};
 
-	usbdrd_phy0: phy@12100000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
+		bus_peri: bus_peri {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK66>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_peri_opp_table>;
+			status = "disabled";
+		};
 
-	usbdrd3_1: usb@12400000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD301>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbdrd_dwc3_1: dwc3 {
-			compatible = "snps,dwc3";
-			reg = <0x12400000 0x10000>;
-			interrupts = <0 73 0>;
-			phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+		bus_g2d: bus_g2d {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_g2d_opp_table>;
+			status = "disabled";
 		};
-	};
 
-	usbdrd_phy1: phy@12500000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12500000 0x100>;
-		clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
+		bus_g2d_acp: bus_g2d_acp {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_g2d_acp_opp_table>;
+			status = "disabled";
+		};
 
-	usbhost2: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
+		bus_jpeg: bus_jpeg {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_jpeg_opp_table>;
+			status = "disabled";
+		};
 
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
+		bus_jpeg_apb: bus_jpeg_apb {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK166>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_jpeg_apb_opp_table>;
+			status = "disabled";
 		};
-	};
 
-	usbhost1: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
+		bus_disp1_fimd: bus_disp1_fimd {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_disp1_fimd_opp_table>;
+			status = "disabled";
+		};
 
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
+		bus_disp1: bus_disp1 {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_disp1_opp_table>;
+			status = "disabled";
 		};
-	};
 
-	usb2_phy: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
+		bus_gscl_scaler: bus_gscl_scaler {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_gscl_opp_table>;
+			status = "disabled";
+		};
 
-	sysmmu_g2dr: sysmmu@0x10A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		bus_mscl: bus_mscl {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_mscl_opp_table>;
+			status = "disabled";
+		};
 
-	sysmmu_g2dw: sysmmu@0x10A70000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A70000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		bus_wcore_opp_table: opp_table2 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <84000000>;
+				opp-microvolt = <925000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <111000000>;
+				opp-microvolt = <950000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <222000000>;
+				opp-microvolt = <950000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <333000000>;
+				opp-microvolt = <950000>;
+			};
+			opp04 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <987500>;
+			};
+		};
 
-	sysmmu_tv: sysmmu@0x14650000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14650000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <7 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
-	};
+		bus_noc_opp_table: opp_table3 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <67000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <75000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <86000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
 
-	sysmmu_gscl0: sysmmu@0x13E80000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E80000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		power-domains = <&gsc_pd>;
-		#iommu-cells = <0>;
-	};
+		bus_fsys_apb_opp_table: opp_table4 {
+			compatible = "operating-points-v2";
+			opp-shared;
 
-	sysmmu_gscl1: sysmmu@0x13E90000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E90000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-		power-domains = <&gsc_pd>;
-		#iommu-cells = <0>;
-	};
+			opp00 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
 
-	sysmmu_scaler0r: sysmmu@0x12880000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12880000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-		#iommu-cells = <0>;
-	};
+		bus_fsys2_opp_table: opp_table5 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <75000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <150000000>;
+			};
+		};
 
-	sysmmu_scaler1r: sysmmu@0x12890000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12890000 0x1000>;
-		interrupts = <0 186 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-		#iommu-cells = <0>;
-	};
+		bus_mfc_opp_table: opp_table6 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <96000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <111000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <167000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <222000000>;
+			};
+			opp04 {
+				opp-hz = /bits/ 64 <333000000>;
+			};
+		};
 
-	sysmmu_scaler2r: sysmmu@0x128A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128A0000 0x1000>;
-		interrupts = <0 188 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-		#iommu-cells = <0>;
-	};
+		bus_gen_opp_table: opp_table7 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <89000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <133000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <178000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
 
-	sysmmu_scaler0w: sysmmu@0x128C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <27 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-		#iommu-cells = <0>;
-	};
+		bus_peri_opp_table: opp_table8 {
+			compatible = "operating-points-v2";
 
-	sysmmu_scaler1w: sysmmu@0x128D0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128D0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-		#iommu-cells = <0>;
-	};
+			opp00 {
+				opp-hz = /bits/ 64 <67000000>;
+			};
+		};
 
-	sysmmu_scaler2w: sysmmu@0x128E0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128E0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <19 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-		#iommu-cells = <0>;
-	};
+		bus_g2d_opp_table: opp_table9 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <84000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <167000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <222000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+			opp04 {
+				opp-hz = /bits/ 64 <333000000>;
+			};
+		};
 
-	sysmmu_jpeg0: sysmmu@0x11F10000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F10000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		#iommu-cells = <0>;
-	};
+		bus_g2d_acp_opp_table: opp_table10 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <67000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <133000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <178000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
 
-	sysmmu_jpeg1: sysmmu@0x11F20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F20000 0x1000>;
-		interrupts = <0 169 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
-		#iommu-cells = <0>;
-	};
+		bus_jpeg_opp_table: opp_table11 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <75000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <150000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
 
-	sysmmu_mfc_l: sysmmu@0x11200000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11200000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <6 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		power-domains = <&mfc_pd>;
-		#iommu-cells = <0>;
-	};
+		bus_jpeg_apb_opp_table: opp_table12 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <84000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <111000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <167000000>;
+			};
+		};
 
-	sysmmu_mfc_r: sysmmu@0x11210000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11210000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <8 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		power-domains = <&mfc_pd>;
-		#iommu-cells = <0>;
-	};
+		bus_disp1_fimd_opp_table: opp_table13 {
+			compatible = "operating-points-v2";
 
-	sysmmu_fimd1_0: sysmmu@0x14640000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14640000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
+			opp00 {
+				opp-hz = /bits/ 64 <120000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+
+		bus_disp1_opp_table: opp_table14 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <120000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+
+		bus_gscl_opp_table: opp_table15 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <150000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+
+		bus_mscl_opp_table: opp_table16 {
+			compatible = "operating-points-v2";
+
+			opp00 {
+				opp-hz = /bits/ 64 <84000000>;
+			};
+			opp01 {
+				opp-hz = /bits/ 64 <167000000>;
+			};
+			opp02 {
+				opp-hz = /bits/ 64 <222000000>;
+			};
+			opp03 {
+				opp-hz = /bits/ 64 <333000000>;
+			};
+			opp04 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
 	};
 
-	sysmmu_fimd1_1: sysmmu@0x14680000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14680000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmu_cpu1>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmu_cpu2>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+		       thermal-sensors = <&tmu_cpu3>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		gpu_thermal: gpu-thermal {
+		       thermal-sensors = <&tmu_gpu>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
 	};
 };
 
@@ -1133,6 +1322,7 @@
 };
 
 &fimd {
+	compatible = "samsung,exynos5420-fimd";
 	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 	clock-names = "sclk_fimd", "fimd";
 	power-domains = <&disp_pd>;
@@ -1140,6 +1330,72 @@
 	iommu-names = "m0", "m1";
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
@@ -1166,3 +1422,59 @@
 	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 	clock-names = "uart", "clk_uart_baud0";
 };
+
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_dwc3_1 {
+	interrupts = <GIC_SPI 73 0>;
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+	clocks = <&clock CLK_WDT>;
+	clock-names = "watchdog";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
+#include "exynos5420-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
new file mode 100644
index 000000000..bf3c6f1ec
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -0,0 +1,125 @@
+/*
+ * SAMSUNG EXYNOS5422 SoC cpu device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This file provides desired ordering for Exynos5422: CPU[0123] being the A7.
+ *
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			clocks = <&clock CLK_ARM_CLK>;
+			reg = <0x0>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
new file mode 100644
index 000000000..9493923ec
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -0,0 +1,61 @@
+/*
+ * Hardkernel Odroid XU3 Audio Codec device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "Odroid-XU3";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN1", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+		};
+	};
+};
+
+&hsi2c_5 {
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 0>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 8adf45574..d56253049 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -1,9 +1,11 @@
 /*
  * Hardkernel Odroid XU3 board device tree source
  *
- * Copyright (c) 2014 Collabora Ltd.
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
+ *                    Anand Moon <linux.amoon@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -15,6 +17,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	memory {
@@ -41,72 +45,188 @@
 		pinctrl-0 = <&emmc_nrst_pin>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpd1 0 1>;
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
 	};
 
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
 	};
 
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0 0>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu_alert0: cpu-alert-0 {
+					temperature = <50000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert1: cpu-alert-1 {
+					temperature = <60000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert2: cpu-alert-2 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_crit0: cpu-crit-0 {
+					temperature = <120000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+				/*
+				 * Exynos542x supports only 4 trip-points
+				 * so for these polling mode is required.
+				 * Start polling at temperature level of last
+				 * interrupt-driven trip: cpu_alert2
+				 */
+				cpu_alert3: cpu-alert-3 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert4: cpu-alert-4 {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				/*
+				 * When reaching cpu_alert3, reduce CPU
+				 * by 2 steps. On Exynos5422/5800 that would
+				 * be: 1600 MHz and 1100 MHz.
+				 */
+				map3 {
+					trip = <&cpu_alert3>;
+					cooling-device = <&cpu0 0 2>;
+				};
+				map4 {
+					trip = <&cpu_alert3>;
+					cooling-device = <&cpu4 0 2>;
+				};
+
+				/*
+				 * When reaching cpu_alert4, reduce CPU
+				 * further, down to 600 MHz (11 steps for big,
+				 * 7 steps for LITTLE).
+				 */
+				map5 {
+					trip = <&cpu_alert4>;
+					cooling-device = <&cpu0 3 7>;
+				};
+				map6 {
+					trip = <&cpu_alert4>;
+					cooling-device = <&cpu4 3 11>;
+				};
+			};
 		};
 	};
+};
 
-	sound: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,name = "Odroid-XU3";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speakers", "Speakers";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Headphone Jack", "MICBIAS",
-			"IN1", "Headphone Jack",
-			"Speakers", "SPKL",
-			"Speakers", "SPKR";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s0 0>;
-			system-clock-frequency = <19200000>;
-		};
+&bus_wcore {
+	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
+			<&nocp_mem1_0>, <&nocp_mem1_1>;
+	vdd-supply = <&buck3_reg>;
+	exynos,saturation-ratio = <100>;
+	status = "okay";
+};
 
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&max98090>;
-			clocks = <&i2s0 CLK_I2S_CDCLK>;
-		};
-	};
+&bus_noc {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys_apb {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys2 {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_gen {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_g2d {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_g2d_acp {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_jpeg {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_jpeg_apb {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_disp1_fimd {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_disp1 {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_gscl_scaler {
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_mscl {
+	devfreq = <&bus_wcore>;
+	status = "okay";
 };
 
 &clock_audss {
@@ -120,14 +240,17 @@
 			<19200000>;
 };
 
-&fimd {
-	status = "okay";
+&cpu0 {
+	cpu-supply = <&buck6_reg>;
 };
 
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 0>;
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 
@@ -142,13 +265,7 @@
 	s2mps11_pmic@66 {
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
-		s2mps11,buck2-ramp-delay = <12>;
-		s2mps11,buck34-ramp-delay = <12>;
-		s2mps11,buck16-ramp-delay = <12>;
-		s2mps11,buck6-ramp-enable = <1>;
-		s2mps11,buck2-ramp-enable = <1>;
-		s2mps11,buck3-ramp-enable = <1>;
-		s2mps11,buck4-ramp-enable = <1>;
+		samsung,s2mps11-acokb-ground;
 
 		interrupt-parent = <&gpx0>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
@@ -170,10 +287,9 @@
 			};
 
 			ldo3_reg: LDO3 {
-				regulator-name = "vdd_ldo3";
+				regulator-name = "vddq_mmc0";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 			};
 
 			ldo5_reg: LDO5 {
@@ -233,10 +349,9 @@
 			};
 
 			ldo13_reg: LDO13 {
-				regulator-name = "vdd_ldo13";
+				regulator-name = "vddq_mmc2";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 			};
 
 			ldo15_reg: LDO15 {
@@ -260,11 +375,16 @@
 				regulator-always-on;
 			};
 
+			ldo18_reg: LDO18 {
+				regulator-name = "vdd_emmc_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
 			ldo19_reg: LDO19 {
 				regulator-name = "vdd_sd";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 			};
 
 			ldo24_reg: LDO24 {
@@ -364,19 +484,6 @@
 	};
 };
 
-&hsi2c_5 {
-	status = "okay";
-	max98090: max98090@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 0>;
-		clocks = <&i2s0 CLK_I2S_CDCLK>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-};
-
 &i2c_2 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
@@ -388,15 +495,6 @@
 	};
 };
 
-&i2s0 {
-	status = "okay";
-};
-
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	mmc-pwrseq = <&emmc_pwrseq>;
@@ -413,6 +511,8 @@
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
+	vmmc-supply = <&ldo18_reg>;
+	vqmmc-supply = <&ldo3_reg>;
 };
 
 &mmc_2 {
@@ -425,6 +525,24 @@
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
 	bus-width = <4>;
 	cap-sd-highspeed;
+	vmmc-supply = <&ldo19_reg>;
+	vqmmc-supply = <&ldo13_reg>;
+};
+
+&nocp_mem0_0 {
+	status = "okay";
+};
+
+&nocp_mem0_1 {
+	status = "okay";
+};
+
+&nocp_mem1_0 {
+	status = "okay";
+};
+
+&nocp_mem1_1 {
+	status = "okay";
 };
 
 &pinctrl_0 {
@@ -452,16 +570,24 @@
 	};
 };
 
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 1 -- Green LED
-	 * PWM 2 -- Blue LED
-	 * PWM 3 -- on MIPI connector for backlight
-	 */
-	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
-	pinctrl-names = "default";
-	status = "okay";
+&tmu_cpu0 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo7_reg>;
 };
 
 &rtc {
@@ -474,6 +600,14 @@
 	dr_mode = "host";
 };
 
-&usbdrd_dwc3_1 {
-	dr_mode = "otg";
+/* usbdrd_dwc3_1 mode customized in each board */
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index c06882bbb..03fa88c45 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -13,8 +13,26 @@
 
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3 Lite";
 	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
 };
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 78e6a502f..9ed6564ac 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -12,6 +12,8 @@
 
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
@@ -49,3 +51,19 @@
 		shunt-resistor = <10000>;
 	};
 };
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
new file mode 100644
index 000000000..2faf88627
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -0,0 +1,48 @@
+/*
+ * Hardkernel Odroid XU4 board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU4";
+	compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
+		     "samsung,exynos5";
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 2 -- Blue LED
+	 */
+	pinctrl-0 = <&pwm0_out &pwm2_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>, <2>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index e4443f4e6..6a0d802e8 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5440.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
@@ -29,12 +30,12 @@
 };
 
 &pcie_0 {
-	reset-gpio = <&pin_ctrl 5 0>;
+	reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &pcie_1 {
-	reset-gpio = <&pin_ctrl 22 0>;
+	reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index f18b51f2e..fd176819b 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -132,7 +132,7 @@
 		clock-names = "spi", "spi_busclk0";
 	};
 
-	pin_ctrl: pinctrl {
+	pin_ctrl: pinctrl@E0000 {
 		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
@@ -200,12 +200,12 @@
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges;
 	};
 
-	rtc {
+	rtc@130000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
 		interrupts = <0 17 0>, <0 16 0>;
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000..0ed302066
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
new file mode 100644
index 000000000..06a604911
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -0,0 +1,199 @@
+/*
+ * Samsung's Exynos54xx SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
+ * Exynos 54xx SoCs should include this file and customize it further
+ * (e.g. with clocks).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "exynos5.dtsi"
+
+/ {
+	compatible = "samsung,exynos5";
+
+	aliases {
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
+		usbdrdphy0 = &usbdrd_phy0;
+		usbdrdphy1 = &usbdrd_phy1;
+	};
+
+	soc: soc {
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
+		};
+
+		mct: mct@101c0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101c0000 0xb00>;
+			interrupt-parent = <&mct_map>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
+					<8>, <9>, <10>, <11>;
+
+			mct_map: mct-map {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &combiner 23 3>,
+						<1 &combiner 23 4>,
+						<2 &combiner 25 2>,
+						<3 &combiner 25 3>,
+						<4 &gic 0 120 0>,
+						<5 &gic 0 121 0>,
+						<6 &gic 0 122 0>,
+						<7 &gic 0 123 0>,
+						<8 &gic 0 128 0>,
+						<9 &gic 0 129 0>,
+						<10 &gic 0 130 0>,
+						<11 &gic 0 131 0>;
+			};
+		};
+
+		watchdog: watchdog@101d0000 {
+			compatible = "samsung,exynos5420-wdt";
+			reg = <0x101d0000 0x100>;
+			interrupts = <0 42 0>;
+		};
+
+		sss: sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <0 112 0>;
+		};
+
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		hsi2c_4: i2c@12ca0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12ca0000 0x1000>;
+			interrupts = <0 60 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@12cb0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cb0000 0x1000>;
+			interrupts = <0 61 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@12cc0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cc0000 0x1000>;
+			interrupts = <0 62 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@12cd0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cd0000 0x1000>;
+			interrupts = <0 63 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usbdrd3_0: usb3-0 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_0: dwc3@12000000 {
+				compatible = "snps,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <0 72 0>;
+				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy0: phy@12100000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3_1: usb3-1 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_1: dwc3@12400000 {
+				compatible = "snps,dwc3";
+				reg = <0x12400000 0x10000>;
+				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy1: phy@12500000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12500000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbhost2: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usbhost1: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usb2_phy: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			#phy-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 7d5b386b5..5ec71e240 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -15,6 +15,8 @@
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5800.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Google Peach Pi Rev 10+";
@@ -63,7 +65,7 @@
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -72,7 +74,7 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};
@@ -94,7 +96,7 @@
 		regulator-name = "P5.0V_USB3CON0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
+		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb300_vbus_en>;
 		enable-active-high;
@@ -105,7 +107,7 @@
 		regulator-name = "P5.0V_USB3CON1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
+		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
@@ -122,6 +124,12 @@
 		compatible = "auo,b133htn01";
 		power-supply = <&tps65090_fet6>;
 		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dp_out>;
+			};
+		};
 	};
 
 	mmc1_pwrseq: mmc1_pwrseq {
@@ -137,18 +145,31 @@
 	vdd-supply = <&ldo9_reg>;
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd_gpio>;
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
-	panel = <&panel>;
+	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port {
+			dp_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
 };
 
 &fimd {
@@ -258,7 +279,6 @@
 				regulator-name = "vdd_1v2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -281,7 +301,6 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -303,7 +322,6 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -314,7 +332,6 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -399,7 +416,6 @@
 				regulator-name = "vdd_ldo9";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-mode = <MAX77802_OPMODE_LP>;
@@ -410,7 +426,6 @@
 				regulator-name = "vdd_ldo10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -652,12 +667,10 @@
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
-	card-detect-delay = <200>;
 	clock-frequency = <800000000>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
@@ -672,10 +685,9 @@
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
+	non-removable;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
@@ -878,6 +890,11 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
@@ -888,7 +905,7 @@
 	status = "okay";
 	num-cs = <1>;
 	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
+	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
 
 	cros_ec: cros-ec@0 {
 		compatible = "google,cros-ec-spi";
@@ -898,6 +915,7 @@
 		pinctrl-0 = <&ec_spi_cs &ec_irq>;
 		reg = <0>;
 		spi-max-frequency = <3125000>;
+		google,has-vbc-nvram;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
@@ -994,6 +1012,26 @@
 	status = "okay";
 };
 
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index c0bb3563c..821301680 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -23,6 +23,114 @@
 	compatible = "samsung,exynos5800-clock";
 };
 
+&cluster_a15_opp_table {
+	opp@1700000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1600000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1500000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@1400000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@1300000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@1200000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@1100000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@1000000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@900000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@800000000 {
+		opp-microvolt = <900000>;
+	};
+	opp@700000000 {
+		opp-microvolt = <900000>;
+	};
+	opp@600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
+&cluster_a7_opp_table {
+	opp@1300000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1200000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1100000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1000000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@900000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@800000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@700000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@600000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
 &mfc {
 	compatible = "samsung,mfc-v8";
 };
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
index 0d0e62489..4aee5cc75 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -11,15 +11,6 @@
 
 / {
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <6000000>;
-		};
-
 		main_xtal {
 			clock-frequency = <6000000>;
 		};
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts
new file mode 100644
index 000000000..6991ab694
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519-demb.dts
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/dts-v1/;
+#include "hi3519.dtsi"
+
+/ {
+	model = "HiSilicon HI3519 DEMO Board";
+	compatible = "hisilicon,hi3519";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dual_timer0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
new file mode 100644
index 000000000..5729ecfcd
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <dt-bindings/clock/hi3519-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
+	};
+
+	clk_3m: clk_3m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <3000000>;
+	};
+
+	crg: clock-reset-controller@12010000 {
+		compatible = "hisilicon,hi3519-crg";
+		#clock-cells = <1>;
+		#reset-cells = <2>;
+		reg = <0x12010000 0x10000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@12100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12100000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART0_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart1: serial@12101000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12101000 0x1000>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART1_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart2: serial@12102000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12102000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART2_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart3: serial@12103000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12103000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART3_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart4: serial@12104000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12104000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART4_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer0: timer@12000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12000000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer1: timer@12001000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12001000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer2: timer@12002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12002000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		spi_bus0: spi@12120000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12120000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI0_CLK>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus1: spi@12121000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12121000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI1_CLK>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus2: spi@12122000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12122000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI2_CLK>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		sysctrl: system-controller@12020000 {
+			compatible = "hisilicon,hi3519-sysctrl", "syscon";
+			reg = <0x12020000 0x1000>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&sysctrl>;
+			offset = <0x4>;
+			mask = <0xdeadbeef>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index fe623928f..a579fbf13 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -16,7 +16,8 @@
 	compatible = "hisilicon,hi3620-hi4511";
 
 	chosen {
-		bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
+		bootargs = "root=/dev/ram0";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 6cbb62e5c..c85d07e6d 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -68,7 +68,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges = <0 0xfc000000 0x2000000>;
 
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 33130f846..4e9562f80 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -43,7 +43,7 @@
 		amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			ranges;
 
 			uart0: uart@10001000 {
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
index 721b09238..d13af8437 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
@@ -15,7 +15,7 @@
 	compatible = "hisilicon,hix5hd2";
 
 	chosen {
-		bootargs = "console=ttyAMA0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index c52722b14..fdcc23d20 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -34,7 +34,7 @@
 		amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			ranges;
 
 			timer0: timer@00002000 {
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts
index af4eee579..f50498659 100644
--- a/arch/arm/boot/dts/imx1-ads.dts
+++ b/arch/arm/boot/dts/imx1-ads.dts
@@ -66,14 +66,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts
index 07d92fb40..e8b4b52c2 100644
--- a/arch/arm/boot/dts/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/imx1-apf9328.dts
@@ -34,14 +34,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts
new file mode 100644
index 000000000..4ec32f4c7
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-sansa.dts
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "SanDisk Sansa Fuze+";
+	compatible = "sandisk,sansa_fuze_plus", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: ssp@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_8bit_pins_a>;
+				bus-width = <8>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D08__GPIO_0_8
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_AUART1_RTS__GPIO_0_27
+						MX23_PAD_AUART1_CTS__GPIO_0_26
+						MX23_PAD_I2C_SCL__I2C_SCL
+						MX23_PAD_I2C_SDA__I2C_SDA
+						MX23_PAD_LCD_DOTCK__GPIO_1_22
+						MX23_PAD_LCD_HSYNC__GPIO_1_24
+						MX23_PAD_PWM3__GPIO_1_29
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 8 0>;
+	};
+
+	reg_vddio_sd1: regulator-vddio-sd1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_vdd_touchpad: regulator-vdd-touchpad0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-touchpad0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 26 0>;
+		regulator-always-on;
+		enable-active-low;
+	};
+
+	reg_vdd_tuner: regulator-vdd-tuner0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-tuner0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 29 0>;
+		regulator-always-on;
+		enable-active-low;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	i2c-0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio1 24 0		/* SDA */
+			&gpio1 22 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+
+	i2c-1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio0 31 0		/* SDA */
+			&gpio0 30 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+
+		touch: touch@20 {
+			compatible = "synaptics,synaptics_i2c";
+			reg = <0x20>;
+		};
+
+		eeprom: eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			pagesize = <32>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
new file mode 100644
index 000000000..025cf9496
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Creative ZEN X-Fi3";
+	compatible = "creative,x-fi3", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: ssp@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_4bit_pins_a>;
+				bus-width = <4>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				key_pins_a: keys@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_ROTARYA__GPIO_2_7
+						MX23_PAD_ROTARYB__GPIO_2_8
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_a>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 7 0>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		voldown {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio2 7 0>;
+			debounce-interval = <20>;
+		};
+
+		volup {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio2 8 0>;
+			debounce-interval = <20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index b995333ea..440ee9a4a 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -111,6 +111,7 @@
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <0>;
 					interrupts = <16>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -120,6 +121,7 @@
 
 				gpio1: gpio@1 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <1>;
 					interrupts = <17>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -129,6 +131,7 @@
 
 				gpio2: gpio@2 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <2>;
 					interrupts = <18>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -171,6 +174,17 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D14__AUART2_RX
+						MX23_PAD_GPMI_D15__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -249,6 +263,40 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_8bit_pins_a: mmc1-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_D04__SSP2_DATA4
+						MX23_PAD_GPMI_D05__SSP2_DATA5
+						MX23_PAD_GPMI_D06__SSP2_DATA6
+						MX23_PAD_GPMI_D07__SSP2_DATA7
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -383,9 +431,11 @@
 			};
 
 			ocotp@8002c000 {
-				compatible = "fsl,ocotp";
+				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x8002c000 0x2000>;
-				status = "disabled";
+				clocks = <&clks 15>;
 			};
 
 			axi-ahb@8002e000 {
@@ -567,7 +617,7 @@
 		};
 	};
 
-	iio_hwmon {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&lradc 8>;
 	};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index ed1d0b457..9300711f1 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -30,7 +30,7 @@
 			label = "BP1";
 			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -161,14 +161,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index 935129635..70292101b 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -298,7 +298,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 7c4b9f2f9..f840f03ad 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -26,77 +26,77 @@
 #define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
 #define MX25_PAD_A13__LCDC_CLS			0x00c 0x22C 0x000 0x07 0x000
 
-#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
-#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
-#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x16 0x000
-#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x17 0x000
-
-#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
-#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
-#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x16 0x000
-#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x17 0x000
-
-#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
-#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
-#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x16 0x000
-#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x17 0x000
-
-#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
-#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
-#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x16 0x000
-#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x17 0x000
-
-#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
-#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
-#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x16 0x000
-#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
-
-#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
-#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x16 0x000
-#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x17 0x000
-
-#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
-#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
-#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x16 0x000
-#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
-
-#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
-#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
-#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x16 0x000
-#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
-
-#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
-#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
-#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
-#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x16 0x000
-#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
-
-#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
-#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
-#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x16 0x000
-#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x17 0x000
-
-#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
-#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
-#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x16 0x000
-#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
-
-#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
-#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x15 0x000
-#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x17 0x000
-
-#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x10 0x000
-#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x14 0x000
-#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x15 0x000
-
-#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x10 0x000
-#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x14 0x000
-#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x15 0x000
-
-#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x10 0x000
-#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x14 0x000
-#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x15 0x000
+#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x00 0x000
+#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x05 0x000
+#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x06 0x000
+#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x07 0x000
+
+#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x00 0x000
+#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x05 0x000
+#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x06 0x000
+#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x07 0x000
+
+#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x00 0x000
+#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x05 0x000
+#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x06 0x000
+#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x00 0x000
+#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x05 0x000
+#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x06 0x000
+#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x07 0x000
+
+#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x00 0x000
+#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x05 0x000
+#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x06 0x000
+#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x07 0x000
+
+#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x00 0x000
+#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x05 0x000
+#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x06 0x000
+#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x07 0x000
+
+#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x00 0x000
+#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x05 0x000
+#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x06 0x000
+#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x07 0x000
+
+#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x00 0x000
+#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x05 0x000
+#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x06 0x000
+#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x07 0x000
+
+#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x00 0x000
+#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x05 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x07 0x000
+#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x06 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x00 0x000
+#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x05 0x000
+#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x06 0x000
+#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x07 0x000
+
+#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x00 0x000
+#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x05 0x000
+#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x06 0x000
+#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x07 0x000
+
+#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x00 0x000
+#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x05 0x000
+#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x07 0x000
+
+#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x00 0x000
+#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x04 0x000
+#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x05 0x000
+
+#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x00 0x000
+#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x04 0x000
+#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x05 0x000
+
+#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x00 0x000
+#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x04 0x000
+#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x05 0x000
 
 #define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
 #define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
@@ -105,51 +105,51 @@
 #define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
 #define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x00 0x000
 #define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
-#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x13 0x000
-#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x15 0x000
+#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x03 0x000
+#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x05 0x000
 
-#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x10 0x000
+#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x00 0x000
 #define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
-#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x13 0x000
-#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x15 0x000
+#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x03 0x000
+#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x05 0x000
 
-#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x10 0x000
-#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x15 0x000
+#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x00 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x05 0x000
 
-#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x10 0x000
-#define MX25_PAD_ECB__UART5_TXD_MUX		0x060 0x270 0x000 0x13 0x000
-#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x15 0x000
+#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x00 0x000
+#define MX25_PAD_ECB__UART5_TXD			0x060 0x270 0x000 0x03 0x000
+#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x05 0x000
 
-#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x10 0x000
-#define MX25_PAD_LBA__UART5_RXD_MUX		0x064 0x274 0x578 0x13 0x000
-#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x15 0x000
+#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x00 0x000
+#define MX25_PAD_LBA__UART5_RXD			0x064 0x274 0x578 0x03 0x000
+#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x05 0x000
 
 #define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
 #define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x10 0x000
-#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x14 0x000
-#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x15 0x000
+#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x00 0x000
+#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x04 0x000
+#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x05 0x000
 
-#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x10 0x000
-#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x15 0x000
+#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x00 0x000
+#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x05 0x000
 
 #define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
 #define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
@@ -210,363 +210,391 @@
 #define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
 #define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
 
-#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x10 0x000
-#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x12 0x000
-#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x15 0x000
+#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x00 0x000
+#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x02 0x000
+#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x05 0x000
 
-#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x10 0x000
-#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x12 0x000
-#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x15 0x000
+#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x00 0x000
+#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x02 0x000
+#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x05 0x000
 
-#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x10 0x000
-#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x15 0x000
+#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x00 0x000
+#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x05 0x000
 
-#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x10 0x000
-#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x15 0x000
+#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x00 0x000
+#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x05 0x000
 
-#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x10 0x000
-#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x15 0x000
+#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x00 0x000
+#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x05 0x000
 
-#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x10 0x000
-#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x15 0x000
+#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x00 0x000
+#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x05 0x000
 
-#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x10 0x000
-#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x15 0x000
+#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x00 0x000
+#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x05 0x000
 
-#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x10 0x000
-#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x15 0x000
+#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x00 0x000
+#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x05 0x000
 
-#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x10 0x000
-#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x15 0x000
+#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x00 0x000
+#define MX25_PAD_LD8__UART4_RXD			0x0e8 0x2e0 0x570 0x02 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x05 0x000
 #define MX25_PAD_LD8__SDHC2_CMD			0x0e8 0x2e0 0x4e0 0x06 0x000
 
-#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x10 0x000
-#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x15 0x001
+#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x00 0x000
+#define MX25_PAD_LD9__UART4_TXD			0x0ec 0x2e4 0x000 0x02 0x000
+#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x05 0x001
 #define MX25_PAD_LD9__SDHC2_CLK			0x0ec 0x2e4 0x4dc 0x06 0x000
 
-#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x10 0x000
-#define MX25_PAD_LD10__FEC_RX_ERR		0x0f0 0x2e8 0x518 0x15 0x001
+#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x00 0x000
+#define MX25_PAD_LD10__UART4_RTS		0x0f0 0x2e8 0x56c 0x02 0x000
+#define MX25_PAD_LD10__FEC_RX_ERR		0x0f0 0x2e8 0x518 0x05 0x001
 
-#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x10 0x000
-#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x15 0x001
+#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x00 0x000
+#define MX25_PAD_LD11__UART4_CTS		0x0f4 0x2ec 0x000 0x02 0x000
+#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x05 0x001
 #define MX25_PAD_LD11__SDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
 
-#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x00 0x000
 #define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
-#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x15 0x001
+#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x05 0x001
 
-#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x00 0x000
 #define MX25_PAD_LD13__CSPI2_MISO		0x0fc 0x2f4 0x49c 0x02 0x000
-#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x15 0x000
+#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x05 0x000
 
-#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x00 0x000
 #define MX25_PAD_LD14__CSPI2_SCLK		0x100 0x2f8 0x494 0x02 0x000
-#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x15 0x000
+#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x05 0x000
 
-#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x00 0x000
 #define MX25_PAD_LD15__CSPI2_RDY		0x104 0x2fc 0x498 0x02 0x000
-#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x15 0x001
+#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x05 0x001
 
-#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x10 0x000
-#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x15 0x000
+#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x00 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x05 0x000
 
-#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x10 0x000
-#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x15 0x000
+#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x00 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x05 0x000
 
-#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x10 0x000
-#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x15 0x000
+#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x00 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x05 0x000
 
-#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x00 0x000
 #define MX25_PAD_OE_ACD__CSPI2_SS0		0x114 0x30c 0x4a4 0x02 0x000
-#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x15 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x05 0x000
 
-#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x10 0x000
-#define MX25_PAD_CONTRAST__CC4			0x118 0x310 0x000 0x11 0x000
-#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x14 0x000
-#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x15 0x001
+#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x00 0x000
+#define MX25_PAD_CONTRAST__CC4			0x118 0x310 0x000 0x01 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x04 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x05 0x001
+#define MX25_PAD_CONTRAST__USBH2_PWR		0x118 0x310 0x000 0x06 0x000
 
-#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x10 0x000
-#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x15 0x000
-#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x16 0x001
+#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x00 0x000
+#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x05 0x000
+#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x06 0x001
 
-#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x10 0x000
-#define MX25_PAD_CSI_D2__UART5_RXD_MUX		0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x00 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD		0x120 0x318 0x578 0x01 0x001
 #define MX25_PAD_CSI_D2__SIM1_CLK0		0x120 0x318 0x000 0x04 0x000
-#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x15 0x000
-#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x17 0x000
+#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x05 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x07 0x000
 
-#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D3__UART5_TXD_MUX		0x124 0x31c 0x000 0x11 0x000
+#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D3__UART5_TXD		0x124 0x31c 0x000 0x01 0x000
 #define MX25_PAD_CSI_D3__SIM1_RST0		0x124 0x31c 0x000 0x04 0x000
-#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x15 0x000
-#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x17 0x001
+#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x07 0x001
 
-#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x10 0x000
-#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x00 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x01 0x001
 #define MX25_PAD_CSI_D4__SIM1_VEN0		0x128 0x320 0x000 0x04 0x000
-#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x15 0x000
-#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x17 0x000
+#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x05 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x07 0x000
 
-#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x10 0x000
-#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x11 0x000
+#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x00 0x000
+#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x01 0x000
 #define MX25_PAD_CSI_D5__SIM1_TX0		0x12c 0x324 0x000 0x04 0x000
-#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x15 0x000
-#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x17 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x05 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x07 0x000
 
-#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x10 0x000
-#define MX25_PAD_CSI_D6__SDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x00 0x000
+#define MX25_PAD_CSI_D6__SDHC2_CMD		0x130 0x328 0x4e0 0x02 0x001
 #define MX25_PAD_CSI_D6__SIM1_PD0		0x130 0x328 0x000 0x04 0x000
-#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		0x134 0x32C 0x4dc 0x12 0x001
-#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x10 0x000
-#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x12 0x000
-#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x15 0x000
-#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x17 0x000
-
-#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x10 0x000
-#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x12 0x000
-#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x15 0x000
-#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x17 0x000
-
-#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x10 0x000
-#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x11 0x000
-#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		0x140 0x338 0x4e4 0x12 0x001
-#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x10 0x000
-#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x11 0x000
-#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		0x144 0x33c 0x4e8 0x12 0x001
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x10 0x000
-#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x11 0x000
-#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		0x148 0x340 0x4ec 0x12 0x001
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x10 0x000
-#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x11 0x000
-#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		0x14c 0x344 0x4f0 0x12 0x001
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x15 0x000
-
-#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x10 0x000
-#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x15 0x000
-
-#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x10 0x000
-#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS1__I2C3_DAT		0x164 0x35C 0x528 0x11 0x001
-#define MX25_PAD_CSPI1_SS1__UART3_RTS		0x164 0x35c 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x10 0x000
-#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x10 0x000
-#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x10 0x000
-#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x11 0x001
-#define MX25_PAD_UART1_RTS__CC3			0x178 0x370 0x000 0x12 0x000
-#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x10 0x000
-#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x11 0x001
-#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x10 0x000
-#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x10 0x000
-#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x10 0x000
-#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x12 0x002
-#define MX25_PAD_UART2_RTS__CC1			0x188 0x380 0x000 0x13 0x000
-#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
-#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x12 0x002
-#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		0x134 0x32C 0x4dc 0x02 0x001
+#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x00 0x000
+#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x02 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x05 0x000
+#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x07 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x00 0x000
+#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x02 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x05 0x000
+#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x07 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x00 0x000
+#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x01 0x000
+#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		0x140 0x338 0x4e4 0x02 0x001
+#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x00 0x000
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x01 0x000
+#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		0x144 0x33c 0x4e8 0x02 0x001
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x00 0x000
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x01 0x000
+#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		0x148 0x340 0x4ec 0x02 0x001
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x00 0x000
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x01 0x000
+#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		0x14c 0x344 0x4f0 0x02 0x001
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x05 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x00 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x05 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x00 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x568 0x02 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS1__I2C3_DAT		0x164 0x35C 0x528 0x01 0x001
+#define MX25_PAD_CSPI1_SS1__UART3_RTS		0x164 0x35c 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x00 0x000
+#define MX25_PAD_UART1_RXD__UART2_DTR		0x170 0x368 0x000 0x03 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x00 0x000
+#define MX25_PAD_UART1_TXD__UART2_DSR		0x174 0x36c 0x000 0x03 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x00 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x01 0x001
+#define MX25_PAD_UART1_RTS__CC3			0x178 0x370 0x000 0x02 0x000
+#define MX25_PAD_UART1_RTS__UART2_DCD		0x178 0x370 0x000 0x03 0x000
+#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x00 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x01 0x001
+#define MX25_PAD_UART1_CTS__UART2_RI		0x17c 0x374 0x000 0x03 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x00 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x00 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x00 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x02 0x002
+#define MX25_PAD_UART2_RTS__CC1			0x188 0x380 0x000 0x03 0x000
+#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x00 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x02 0x002
+#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x05 0x000
 
+/*
+ * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD
+ * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
+ * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
+ * bug that configuring the SD1_CMD function doesn't enable the input path for
+ * this pin.
+ * This might have side effects for other hardware units that are connected to
+ * that pin and use the respective function as input.
+ */
 #define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
-#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x11 0x001
-#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x12 0x002
-#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x10 0x000
-#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x11 0x001
-#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x12 0x002
-#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x11 0x001
-#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x13 0x000
-#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x12 0x002
-#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x12 0x002
-#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x13 0x002
-#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW3__CSI_D1		0x1b4 0x3ac 0x48c 0x13 0x002
-#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL0__UART4_RXD_MUX	0x1b8 0x3b0 0x570 0x11 0x001
-#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL1__UART4_TXD_MUX	0x1bc 0x3b4 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x12 0x001
-#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x12 0x001
-#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x12 0x001
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x10 0x000
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x01 0x001
+#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x02 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x00 0x000
+#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x01 0x001
+#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x02 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x01 0x001
+#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x03 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x02 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x02 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW0__UART3_RXD		0x1a8 0x3a0 0x568 0x01 0x001
+#define MX25_PAD_KPP_ROW0__UART1_DTR		0x1a8 0x3a0 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW1__UART3_TXD		0x1ac 0x3a4 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW1__UART1_DSR		0x1ac 0x3a4 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW2__UART3_RTS		0x1b0 0x3a8 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x03 0x002
+#define MX25_PAD_KPP_ROW2__UART1_DCD		0x1b0 0x3a8 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW3__UART3_CTS		0x1b4 0x3ac 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW3__CSI_D1		0x1b4 0x3ac 0x48c 0x03 0x002
+#define MX25_PAD_KPP_ROW3__UART1_RI		0x1b4 0x3ac 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD		0x1b8 0x3b0 0x570 0x01 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD		0x1bc 0x3b4 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x56c 0x01 0x001
+#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x00 0x000
+#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x02 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x00 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x02 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x02 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x00 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x00 0x000
 /*
  * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
  * 01/2011) this is CAN1_TX but that's wrong.
  */
-#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x14 0x000
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x15 0x000
+#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x04 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x00 0x000
 /*
  * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
  * 01/2011) this is CAN1_RX but that's wrong.
  */
-#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x14 0x000
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x15 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x04 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x15 0x000
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x05 0x000
 
-#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x10 0x000
-#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x11 0x000
-#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x15 0x000
+#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x00 0x000
+#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x01 0x000
+#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x05 0x000
 
-#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
-#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
+#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
+#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
 
-#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
-#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
-#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
+#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
 
-#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
-#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
+#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
 
-#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
-#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x11 0x000
-#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x12 0x001
-#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x13 0x001
-#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
+#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
+#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
 
-#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
-#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x12 0x001
-#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
+#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
+#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
 
-#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
-#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x11 0x002
-#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x12 0x000
-#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x14 0x000
-#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x16 0x002
+#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
+#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
+#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
 
-#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x10 0x000
-#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x12 0x000
-#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x14 0x000
-#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x16 0x000
+#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
+#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
 
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x10 0x000
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x15 0x000
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x00 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x10 0x000
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x15 0x000
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x00 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x14 0x000
-#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x04 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x05 0x000
+#define MX25_PAD_VSTBY_REQ__UART4_RTS		0x214 0x408 0x56c 0x06 0x002
 
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x05 0x000
 
-#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x10 0x000
-#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x14 0x001
-#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x15 0x000
+#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x00 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x04 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x05 0x000
+#define MX25_PAD_POWER_FAIL__UART4_CTS		0x21c 0x410 0x000 0x06 0x000
 
-#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x10 0x000
-#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x15 0x000
+#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x00 0x000
+#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x05 0x000
 
 #define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
 #define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 0097c43f7..f96c54231 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -24,6 +24,10 @@
 		i2c2 = &i2c3;
 		mmc0 = &esdhc1;
 		mmc1 = &esdhc2;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		pwm2 = &pwm3;
+		pwm3 = &pwm4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -265,13 +269,36 @@
 				status = "disabled";
 			};
 
-			tsc: tsc@50030000 {
-				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
-				reg = <0x50030000 0x4000>;
+			tscadc: tscadc@50030000 {
+				compatible = "fsl,imx25-tsadc";
+				reg = <0x50030000 0xc>;
 				interrupts = <46>;
 				clocks = <&clks 119>;
 				clock-names = "ipg";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
 				status = "disabled";
+
+				adc: adc@50030800 {
+					compatible = "fsl,imx25-gcq";
+					reg = <0x50030800 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+
+				tsc: tcq@50030400 {
+					compatible = "fsl,imx25-tcq";
+					reg = <0x50030400 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <0>;
+					fsl,wires = <4>;
+					status = "disabled";
+				};
 			};
 
 			ssi1: ssi@50034000 {
@@ -393,6 +420,15 @@
 				interrupts = <41>;
 			};
 
+			scc: crypto@53fac000 {
+				compatible = "fsl,imx25-scc";
+				reg = <0x53fac000 0x4000>;
+				clocks = <&clks 111>;
+				clock-names = "ipg";
+				interrupts = <49>, <50>;
+				interrupt-names = "scm", "smn";
+			};
+
 			esdhc1: esdhc@53fb4000 {
 				compatible = "fsl,imx25-esdhc";
 				reg = <0x53fb4000 0x4000>;
@@ -493,7 +529,8 @@
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 70>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
@@ -503,7 +540,8 @@
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 70>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
 				status = "disabled";
@@ -512,8 +550,6 @@
 			usbmisc: usbmisc@53ff4600 {
 				#index-cells = <1>;
 				compatible = "fsl,imx25-usbmisc";
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
 				reg = <0x53ff4600 0x00f>;
 			};
 
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
index e2242638e..2cf896c50 100644
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -77,7 +77,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
index 2ab65fc4c..27846ff9b 100644
--- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -140,21 +140,21 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 49450dbbc..d0ef496a1 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -106,7 +106,7 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 7c869fe3c..bfd4946cf 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -147,21 +147,21 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 538568b0d..cf09e72ae 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -283,14 +283,14 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index b69be5c49..f818ea483 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -144,6 +144,15 @@
 				clock-names = "ipg", "per";
 			};
 
+			rtc: rtc@10007000 {
+				compatible = "fsl,imx21-rtc";
+				reg = <0x10007000 0x1000>;
+				interrupts = <22>;
+				clocks = <&clks IMX27_CLK_CKIL>,
+					 <&clks IMX27_CLK_RTC_IPG_GATE>;
+				clock-names = "ref", "ipg";
+			};
+
 			kpp: kpp@10008000 {
 				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
 				reg = <0x10008000 0x1000>;
@@ -477,7 +486,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024000 0x200>;
 				interrupts = <56>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
@@ -486,7 +498,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024200 0x200>;
 				interrupts = <54>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				dr_mode = "host";
 				status = "disabled";
@@ -496,7 +511,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024400 0x200>;
 				interrupts = <55>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
 				status = "disabled";
@@ -506,7 +524,6 @@
 				#index-cells = <1>;
 				compatible = "fsl,imx27-usbmisc";
 				reg = <0x10024600 0x200>;
-				clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
 			};
 
 			sahara2: sahara@10025000 {
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 7ac4f1af1..c4fadbc1b 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -140,7 +140,7 @@
 			auart0: serial@8006a000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&auart0_pins_a>;
-				fsl,uart-has-rtscts;
+				uart-has-rtscts;
 				status = "okay";
 			};
 
@@ -225,7 +225,7 @@
 			label = "User button";
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index ef944b6d4..a9c347e48 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -426,7 +426,7 @@
 
 	};
 
-	onewire@0 {
+	onewire {
 		compatible = "w1-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&w1_gpio_pins>;
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 5df0b24ea..7a80bd686 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -115,7 +115,7 @@
 
 			pwm: pwm@80064000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
+				pinctrl-0 = <&pwm4_pins_a>;
 				status = "okay";
 			};
 
@@ -170,7 +170,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
+		pwms = <&pwm 4 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
index 927b391d2..581e85f4f 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -36,7 +36,7 @@
 			label = "SW3";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -49,7 +49,7 @@
 			label = "SW4";
 			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -84,6 +84,7 @@
 
 		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -92,6 +93,7 @@
 
 		reg_lcd_3v3: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
 			regulator-name = "lcd-3v3";
@@ -103,6 +105,7 @@
 
 		reg_usb0_vbus: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
 			regulator-name = "usb0_vbus";
@@ -114,6 +117,7 @@
 
 		reg_usb1_vbus: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
 			regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 279249b8c..a5ba669b4 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -57,7 +57,7 @@
 				flash: m25p80@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "sst,sst25vf016b";
+					compatible = "sst,sst25vf016b", "jedec,spi-nor";
 					spi-max-frequency = <40000000>;
 					reg = <0>;
 				};
@@ -224,7 +224,7 @@
 			auart0: serial@8006a000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&auart0_pins_a>;
-				fsl,uart-has-rtscts;
+				uart-has-rtscts;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
index 759cc5625..214bb1506 100644
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -27,32 +27,6 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
 				status = "okay";
-
-				partition@0 {
-					label = "bootloader";
-					reg = <0x00000000 0x00300000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "environment";
-					reg = <0x00300000 0x00080000>;
-				};
-
-				partition@2 {
-					label = "redundant-environment";
-					reg = <0x00380000 0x00080000>;
-				};
-
-				partition@3 {
-					label = "kernel";
-					reg = <0x00400000 0x00400000>;
-				};
-
-				partition@4 {
-					label = "filesystem";
-					reg = <0x00800000 0x0f800000>;
-				};
 			};
 		};
 
@@ -63,7 +37,7 @@
 				status = "okay";
 
 				rtc: rtc@68 {
-					compatible = "stm,m41t62";
+					compatible = "st,m41t62";
 					reg = <0x68>;
 				};
 			};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index e35cc6ba3..8d04e5703 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -41,7 +41,7 @@
 				flash: m25p80@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "m25p80";
+					compatible = "m25p80", "jedec,spi-nor";
 					spi-max-frequency = <40000000>;
 					reg = <0>;
 				};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index a5b27c85a..0ebbc8385 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -13,6 +13,7 @@
 /dts-v1/;
 #include "imx28.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Ka-Ro electronics TX28 module";
@@ -129,7 +130,7 @@
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
-			clock-frequency = <27000000>;
+			clock-frequency = <26000000>;
 		};
 	};
 
@@ -172,7 +173,7 @@
 		default-brightness-level = <50>;
 	};
 
-	matrix_keypad: matrix-keypad@0 {
+	matrix_keypad: matrix-keypad {
 		compatible = "gpio-matrix-keypad";
 		col-gpios = <
 			&gpio5 0 GPIO_ACTIVE_HIGH
@@ -201,7 +202,7 @@
 			0x02020049 /* row 2, col 2, KEY_KP9 */
 		>;
 		gpio-activelow;
-		linux,wakeup;
+		wakeup-source;
 		debounce-delay-ms = <100>;
 		col-scan-delay-us = <5000>;
 		linux,no-autorepeat;
@@ -324,7 +325,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <5 0>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4e073e854..0ad893bf5 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -165,6 +165,7 @@
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <0>;
 					interrupts = <127>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -174,6 +175,7 @@
 
 				gpio1: gpio@1 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <1>;
 					interrupts = <126>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -183,6 +185,7 @@
 
 				gpio2: gpio@2 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <2>;
 					interrupts = <125>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -192,6 +195,7 @@
 
 				gpio3: gpio@3 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <3>;
 					interrupts = <124>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -201,6 +205,7 @@
 
 				gpio4: gpio@4 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <4>;
 					interrupts = <123>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -405,6 +410,17 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				auart4_2pins_b: auart4@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__AUART4_RX
+						MX28_PAD_AUART0_RTS__AUART4_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -423,6 +439,32 @@
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
+				mac0_pins_b: mac0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_RXD2__ENET0_RXD2
+						MX28_PAD_ENET0_RXD3__ENET0_RXD3
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET0_TXD2__ENET0_TXD2
+						MX28_PAD_ENET0_TXD3__ENET0_TXD3
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+						MX28_PAD_ENET0_COL__ENET0_COL
+						MX28_PAD_ENET0_CRS__ENET0_CRS
+						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
+						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
+						>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
 				mac1_pins_a: mac1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -936,9 +978,11 @@
 			};
 
 			ocotp: ocotp@8002c000 {
-				compatible = "fsl,ocotp";
+				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x8002c000 0x2000>;
-				status = "disabled";
+				clocks = <&clks 25>;
 			};
 
 			axi-ahb@8002e000 {
@@ -1243,7 +1287,7 @@
 		};
 	};
 
-	iio_hwmon {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&lradc 8>;
 	};
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
index 2424abfc9..ae6cebbed 100644
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -22,6 +22,6 @@
 };
 
 &uart5 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index c34f82581..1ce7ae94e 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -25,7 +25,7 @@
 		#size-cells = <0>;
 
 		cpu {
-			compatible = "arm,arm1136";
+			compatible = "arm,arm1136jf-s";
 			device_type = "cpu";
 		};
 	};
@@ -69,6 +69,14 @@
 				status = "disabled";
 			};
 
+			kpp: kpp@43fa8000 {
+				compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks 46>;
+				status = "disabled";
+			};
+
 			uart4: serial@43fb0000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43fb0000 0x4000>;
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index 75b036700..e9357131b 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -30,7 +30,7 @@
 			label = "BP1";
 			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,input-type = <1>;
 		};
 	};
@@ -139,14 +139,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
index 8d7155237..9bb628f22 100644
--- a/arch/arm/boot/dts/imx35-pdk.dts
+++ b/arch/arm/boot/dts/imx35-pdk.dts
@@ -63,6 +63,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index d520390cf..7c4234a7f 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -29,7 +29,7 @@
 		#size-cells = <0>;
 
 		cpu {
-			compatible = "arm,arm1136";
+			compatible = "arm,arm1136jf-s";
 			device_type = "cpu";
 		};
 	};
@@ -137,6 +137,14 @@
 				status = "disabled";
 			};
 
+			kpp: kpp@43fa8000 {
+				compatible = "fsl,imx35-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks 56>;
+				status = "disabled";
+			};
+
 			iomuxc: iomuxc@43fac000 {
 				compatible = "fsl,imx35-iomuxc";
 				reg = <0x43fac000 0x4000>;
@@ -305,7 +313,8 @@
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 73>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
@@ -315,7 +324,8 @@
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 73>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
 				dr_mode = "host";
@@ -325,8 +335,6 @@
 			usbmisc: usbmisc@53ff4600 {
 				#index-cells = <1>;
 				compatible = "fsl,imx35-usbmisc";
-				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
-				clock-names = "ipg", "ahb", "per";
 				reg = <0x53ff4600 0x00f>;
 			};
 		};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index 1b22512c9..27d763c7a 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -33,7 +33,7 @@
 	flash: m25p32@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "m25p32", "m25p80";
+		compatible = "m25p32", "jedec,spi-nor";
 		spi-max-frequency = <25000000>;
 		reg = <1>;
 
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 649befeb2..f097b4f29 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -107,7 +107,7 @@
 			label = "Power Button";
 			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -388,7 +388,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -401,7 +401,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
index 321662f53..16fc69c69 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -156,7 +156,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
 	cap-sdio-irq;
-	enable-sdio-wakeup;
+	wakeup-source;
 	keep-power-in-suspend;
 	max-frequency = <50000000>;
 	no-1-8-v;
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index 34599c547..728212861 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -41,7 +41,7 @@
 			label = "BP1";
 			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,input-type = <1>;
 		};
 	};
@@ -261,14 +261,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h
index 9eb92abae..82eae3c8a 100644
--- a/arch/arm/boot/dts/imx51-pinfunc.h
+++ b/arch/arm/boot/dts/imx51-pinfunc.h
@@ -536,7 +536,6 @@
 #define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		0x2c4 0x6c4 0x000 0x3 0x0
 #define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		0x2c4 0x6c4 0x000 0x0 0x0
 #define MX51_PAD_DISPB2_SER_CLK__GPIO3_7		0x2c4 0x6c4 0x990 0x4 0x1
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK		0x2c8 0x6c8 0x000 0x2 0x0
 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		0x2c8 0x6c8 0x000 0x2 0x0
 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		0x2c8 0x6c8 0x000 0x3 0x0
 #define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		0x2c8 0x6c8 0x000 0x0 0x0
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
new file mode 100644
index 000000000..ca1cc5eca
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -0,0 +1,329 @@
+/*
+ * Copyright 2015 Savoir-faire Linux
+ *
+ * This device tree is based on imx51-babbage.dts
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Technologic Systems TS-4800";
+	compatible = "technologic,imx51-ts4800", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x90000000 0x10000000>;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			clock-frequency = <24576000>;
+		};
+	};
+
+	backlight_reg: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_lcd>;
+		regulator-name = "enable_lcd_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 78770>;
+		brightness-levels = <0 150 200 255>;
+		default-brightness-level = <1>;
+		power-supply = <&backlight_reg>;
+	};
+
+	display0: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <30066000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <50>;
+				hback-porch = <70>;
+				hsync-len = <50>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <50>;
+			};
+		};
+
+		port@0 {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc: m41t00@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_backlight>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	fpga@0 {
+		compatible = "simple-bus";
+		fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000
+				      0x00000000 0x1c092480 0x00000000>;
+		reg = <0 0x0000000 0x1d000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x1d000>;
+
+		syscon: syscon@b0010000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000 0x3d>;
+			reg-io-width = <2>;
+
+			wdt@e {
+				compatible = "technologic,ts4800-wdt";
+				syscon = <&syscon 0xe>;
+			};
+		};
+
+		touchscreen {
+			compatible = "technologic,ts4800-ts";
+			reg = <0x12000 0x1000>;
+			syscon = <&syscon 0x10 6>;
+		};
+
+		fpga_irqc: fpga-irqc@15000 {
+			compatible = "technologic,ts4800-irqc";
+			reg = <0x15000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_interrupt_fpga>;
+			interrupt-parent = <&gpio2>;
+			interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		can@1a000 {
+			compatible = "technologic,sja1000";
+			reg = <0x1a000 0x100>;
+			interrupt-parent = <&fpga_irqc>;
+			interrupts = <1>;
+			reg-io-width = <2>;
+			nxp,tx-output-config = <0x06>;
+			nxp,external-clock-frequency = <24000000>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+		>;
+	};
+
+	pinctrl_enable_lcd: enablelcdgrp {
+		fsl,pins = <
+			MX51_PAD_CSI2_D12__GPIO4_9		0x1c5
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_GPIO1_0__GPIO1_0		0x100
+			MX51_PAD_GPIO1_1__GPIO1_1		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+			MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x00000180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x00000180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x00002180
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x00002004
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x00002004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x00002004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x00002004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x00002004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x00002004
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x00002180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x000020a4
+			MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_interrupt_fpga: fpgaicgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D27__GPIO2_9		0xe5
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+			MX51_PAD_DI_GP4__DI2_PIN15		0x5
+		>;
+	};
+
+	pinctrl_pwm_backlight: backlightgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__PWM1_PWMO		0x80000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_weim: weimgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_DTACK__EIM_DTACK		0x85
+			MX51_PAD_EIM_CS0__EIM_CS0		0x0
+			MX51_PAD_EIM_CS1__EIM_CS1		0x0
+			MX51_PAD_EIM_EB0__EIM_EB0		0x85
+			MX51_PAD_EIM_EB1__EIM_EB1		0x85
+			MX51_PAD_EIM_OE__EIM_OE			0x85
+			MX51_PAD_EIM_LBA__EIM_LBA		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 3bc18835f..4486bc47d 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -69,21 +69,21 @@
 			label = "Home";
 			gpios = <&gpio5 10 0>;
 			linux,code = <102>; /* KEY_HOME */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back {
 			label = "Back";
 			gpios = <&gpio5 11 0>;
 			linux,code = <158>; /* KEY_BACK */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		program {
 			label = "Program";
 			gpios = <&gpio5 12 0>;
 			linux,code = <362>; /* KEY_PROGRAM */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		volume-up {
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
index 87a7fc709..d259f57bf 100644
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@@ -84,7 +84,7 @@
 	};
 
 	rtc: rtc@68 {
-		compatible = "stm,m41t62";
+		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index 53f40885c..dcee1e0f9 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -84,6 +84,15 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 2 0>;
 		};
+
+		reg_usb_otg_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 4 0>;
+		};
 	};
 
 	sound {
@@ -168,6 +177,12 @@
 			>;
 		};
 
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
+			>;
+		};
+
 		led_pin_gpio: led_gpio@0 {
 			fsl,pins = <
 				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
@@ -351,6 +366,10 @@
 };
 
 &usbotg {
-	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index b0d5542ac..c05e7cfd0 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -59,22 +59,22 @@
 
 		power {
 			label = "Power Button";
-			gpios = <&gpio1 8 0>;
-			linux,code = <116>; /* KEY_POWER */
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
 		};
 
 		volume-up {
 			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-			gpio-key,wakeup;
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
 		};
 
 		volume-down {
 			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-			gpio-key,wakeup;
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
 		};
 	};
 
@@ -228,10 +228,11 @@
 			>;
 		};
 
+		/* open drain */
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index dec4b073c..379939699 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -64,8 +64,8 @@
 			};
 
 			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 
@@ -76,8 +76,8 @@
 			};
 
 			ldo5_reg: ldo5 {
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
@@ -100,14 +100,14 @@
 			};
 
 			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
 			ldo10_reg: ldo10 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 		};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index 82d623d05..96d7eede4 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -20,15 +20,7 @@
 };
 
 &iomuxc {
-	i2c1 {
-		/* open drain */
-		pinctrl_i2c1_qsrb: i2c1grp-1 {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA      0x400001ec
-				MX53_PAD_CSI0_DAT9__I2C1_SCL      0x400001ec
-			>;
-		};
-
+	imx53-qsrb {
 		pinctrl_pmic: pmicgrp {
 			fsl,pins = <
 				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1e4 /* IRQ */
@@ -38,17 +30,13 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_qsrb>;
-	status = "okay";
-
 	pmic: mc34708@8 {
 		compatible = "fsl,mc34708";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <23 0x8>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
 		regulators {
 			sw1_reg: sw1a {
 				regulator-name = "SW1";
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index fc89ce1e5..9f5190040 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -56,7 +56,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -76,7 +76,7 @@
 	flash: m25p32@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32", "st,m25p";
+		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <1>;
 
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index e03373a58..91a6a9ff5 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -218,7 +218,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index 3b73e81dc..0ecb43d88 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -12,6 +12,7 @@
 /dts-v1/;
 #include "imx53-tx53.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -216,7 +217,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <15 0>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 	};
@@ -230,7 +231,7 @@
 		interrupts = <26 0>;
 		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <660>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
index 64804719f..3cf682a68 100644
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -101,7 +101,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <23 0>;
 		wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -126,7 +126,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <22 0>;
 		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -183,13 +183,14 @@
 	status = "okay";
 
 	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "jeida";
-		fsl,data-width = <24>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
 		status = "okay";
 
 		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -202,19 +203,36 @@
 				hsync-active = <0>;
 				vsync-active = <0>;
 				de-active = <1>;
-				pixelclk-active = <0>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hsync-len = <60>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vsync-len = <13>;
+				vfront-porch = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
 			};
 		};
 	};
 
 	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "jeida";
-		fsl,data-width = <24>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
 		status = "okay";
 
 		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -227,7 +245,7 @@
 				hsync-active = <0>;
 				vsync-active = <0>;
 				de-active = <1>;
-				pixelclk-active = <0>;
+				pixelclk-active = <1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 7cbf9b8d9..b4a310de5 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -37,7 +37,7 @@
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
-			clock-frequency = <27000000>;
+			clock-frequency = <26000000>;
 		};
 	};
 
@@ -50,7 +50,7 @@
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -513,21 +513,21 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 73a99cb8d..d80f468c0 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	aliases {
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
new file mode 100644
index 000000000..e0161e461
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nit6xlite.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
+	compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
index 5f4d33ccc..8398f979b 100644
--- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
+++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
@@ -3,12 +3,42 @@
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -16,6 +46,6 @@
 #include "imx6qdl-nitrogen6x.dtsi"
 
 / {
-	model = "Freescale i.MX6 DualLite Nitrogen6x Board";
-	compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl";
+	model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
+	compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
 };
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
index b13845c28..c3a14a433 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -23,7 +23,7 @@
 
 &ecspi3 {
 	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 5111f5170..2becd7cd6 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -97,6 +97,7 @@
 	phy-reset-gpios = <&gpio3 31 0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -114,7 +115,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts
index 2de04479d..0f06ca5c9 100644
--- a/arch/arm/boot/dts/imx6dl-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts
@@ -2,12 +2,42 @@
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
index 913bb9a04..063fe7510 100644
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -1,12 +1,42 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
new file mode 100644
index 000000000..ff8f7b1c4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &display;
+		ipu1 = &ipu1;
+	};
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_2>;
+		interface-pix-fmt = "rgb24";
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&vga>;
+
+			vga: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&pinctrl_usdhc1 {
+	fsl,pins = <
+		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+	>;
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&reg_lcd0_pwr {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
new file mode 100644
index 000000000..f988950e9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
@@ -0,0 +1,253 @@
+/*
+ * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8035 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &display;
+		ipu1 = &ipu1;
+	};
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_2>;
+		interface-pix-fmt = "rgb24";
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&vga>;
+
+			vga: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&reg_lcd0_pwr {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
index 5fe465c28..b7a72840b 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
@@ -1,12 +1,42 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
new file mode 100644
index 000000000..4d3204a56
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
@@ -0,0 +1,248 @@
+/*
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_2>;
+		interface-pix-fmt = "rgb24";
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&vga>;
+
+			vga: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&reg_lcd0_pwr {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
index c275eecc9..5e0c6bb49 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -1,12 +1,42 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -77,17 +107,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <22 0>;
 		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
-	};
-};
-
-&iomuxc {
-	imx6dl-tx6u-811x {
-		pinctrl_eeti: eetigrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-			>;
-		};
+		wakeup-source;
 	};
 };
 
@@ -148,3 +168,11 @@
 &pwm1 {
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_eeti: eetigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
new file mode 100644
index 000000000..b9a783f71
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd0_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&i2c3 {
+	polytouch1: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti>;
+		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pads partially clash with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds0_timing1>;
+
+			lvds0_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			lvds0_timing2: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds1_timing2>;
+
+			lvds1_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			lvds1_timing1: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			lvds1_timing2: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eeti: eetigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
index f607d4f1d..8c314eee4 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
@@ -13,7 +13,7 @@
 #include "imx6qdl-wandboard-revb1.dtsi"
 
 / {
-	model = "Wandboard i.MX6 Dual Lite Board";
+	model = "Wandboard i.MX6 Dual Lite Board rev B1";
 	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
 
 	memory {
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 4b0ec0703..9a4c22c2d 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -30,7 +30,7 @@
 				/* kHz    uV */
 				996000  1250000
 				792000  1175000
-				396000  1075000
+				396000  1150000
 			>;
 			fsl,soc-operating-points = <
 				/* ARM kHz  SOC-PU uV */
@@ -104,10 +104,15 @@
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>;
 	};
+
+	gpu-subsystem {
+		compatible = "fsl,imx-gpu-subsystem";
+		cores = <&gpu_2d>, <&gpu_3d>;
+	};
 };
 
 &gpt {
-	compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt";
+	compatible = "fsl,imx6dl-gpt";
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
new file mode 100644
index 000000000..207b85b91
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -0,0 +1,318 @@
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
+	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2cddc;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			label = "LED_4_GREEN";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4-red {
+			label = "LED_4_RED";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-green {
+			label = "LED_5_GREEN";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-red {
+			label = "LED_5_RED";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		ledpwm1 {
+			label = "PWM1";
+			pwms = <&pwm1 0 50000>;
+			max-brightness = <255>;
+		};
+
+		ledpwm2 {
+			label = "PWM2";
+			pwms = <&pwm2 0 50000>;
+			max-brightness = <255>;
+		};
+
+		ledpwm3 {
+			label = "PWM3";
+			pwms = <&pwm3 0 50000>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&backlight {
+	brightness-levels = <0 127 191 223 239 247 251 255>;
+	default-brightness-level = <1>;
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2cddc>;
+	status = "okay";
+};
+
+&i2cddc {
+	status = "okay";
+};
+
+/* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ipu1_di1_disp1 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd_cd>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	/*
+	 * Mux the Apalis GPIOs
+	 * GPIO5, 6 used by optional fusion_F0710A kernel module
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index d6515f7a5..d8acf1561 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -185,6 +185,7 @@
 	phy-mode = "rgmii";
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -218,7 +219,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	fsl,dte-mode;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
new file mode 100644
index 000000000..f0a2be526
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B450v3";
+	compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
new file mode 100644
index 000000000..33cb71aca
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B650v3";
+	compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
new file mode 100644
index 000000000..167f74467
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B850v3";
+	compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+	};
+};
+
+&i2c2 {
+	pca9547_ddc: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux2_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		mux2_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		mux2_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux2_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		mux2_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		mux2_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux2_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux2_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&mux2_i2c1>;
+};
+
+&mux1_i2c1 {
+	ads7830@4a {
+		compatible = "ti,ads7830";
+		reg = <0x4a>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
new file mode 100644
index 000000000..f2adc6072
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -0,0 +1,634 @@
+/*
+ * Support for imx6 based Advantech DMS-BA16 Qseven module
+ *
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_display>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: n25q032@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "spare";
+			reg = <0xd0000 0x130000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		regulators {
+			vdd_bcore1: bcore1 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bcore2: bcore2 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bpro: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bmem: bmem {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bio: bio {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bperi: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo2: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo8: ldo8 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo11: ldo11 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8010";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	fsl,tx-swing-full = <103>;
+	fsl,tx-swing-low = <103>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
+	bus-width = <8>;
+	vmmc-supply = <&vdd_bperi>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_display: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x1b0b0
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			/* SPI1 CS */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x1b0b0
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x1b0b0
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			/* FEC Reset */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
+			/* AR8033 Interrupt */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05        0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIO 0-7 */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00  0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01  0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02  0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03  0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04  0x1b0b0
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05  0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06  0x1b0b0
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07  0x1b0b0
+			/* SUS_S3_OUT to CPLD */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe Reset */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			/* PCIe Wake */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC Interrupt */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			/* RTC_INT */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			/* HUB_RESET */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
+			/* uSDHC2 CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_reset: usdhc3grp-reset {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17059
+			/* uSDHC4 CD */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+			/* uSDHC4 SDIO PWR */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+			/* uSDHC4 SDIO WP */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			/* uSDHC4 SDIO LED */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
new file mode 100644
index 000000000..cf3fd31e3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q-ba16.dtsi"
+
+/ {
+	clocks {
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <22000000>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&ecspi5 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: m25p80@0 {
+		compatible = "atmel,at25";
+		spi-max-frequency = <20000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&i2c1 {
+	pca9547: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux1_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ads7830: ads7830@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+
+			mma8453: mma8453@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+			};
+		};
+
+		mux1_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+
+			mpl3115: mpl3115@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+		};
+
+		mux1_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux1_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			sgtl5000: codec@0a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				clocks = <&mclk>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_3p3v>;
+			};
+		};
+
+		mux1_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pca9539: pca9539@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio2>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		mux1_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux1_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux1_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index 99b46f803..b5de7e620 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -3,15 +3,46 @@
  *
  * Author: Valentin Raevsky <valentin@compulab.co.il>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -31,6 +62,71 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-pcie-power-on-gpio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: usb_otg_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &fec {
@@ -46,58 +142,122 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	eeprom@50 {
+		compatible = "at24,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
 &iomuxc {
-	imx6q-cm-fx6 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x100b1
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
 
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
 	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x130b0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	vdd-supply = <&reg_pcie_power_on_gpio>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
 };
 
 &uart4 {
@@ -105,3 +265,18 @@
 	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 };
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 4fa254347..905907325 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -109,7 +109,7 @@
 	status = "okay";
 
 	flash: m25p80@0 {
-		compatible = "m25p80";
+		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <40000000>;
 		reg = <0>;
 	};
@@ -282,7 +282,7 @@
 	};
 
 	rtc: m41t62@68 {
-		compatible = "stm,m41t62";
+		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
new file mode 100644
index 000000000..4fa560192
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -0,0 +1,502 @@
+/*
+ * Copyright 2016 United Western Technologies.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Uniwest Evi";
+	compatible = "uniwest,imx6q-evi", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usbh1_vbus: regulator-usbhubreset {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		startup-delay-us = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_hubreset>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	panel {
+		compatible = "sharp,lq101k1ly04";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
+	status = "okay";
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		<&gpio4 25 GPIO_ACTIVE_LOW>,
+		<&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>;
+	status = "okay";
+};
+
+&ecspi5 {
+	fsl,spi-num-chipselects = <4>;
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		<&gpio1 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 12 GPIO_ACTIVE_LOW>,
+		<&gpio2 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
+	status = "okay";
+
+	eeprom: m95m02@1 {
+		compatible = "st,m95m02", "atmel,at25";
+		size = <262144>;
+		pagesize = <256>;
+		address-width = <24>;
+		spi-max-frequency = <5000000>;
+		reg = <1>;
+	};
+
+	pb_rtc: rtc@3 {
+		compatible = "nxp,rtc-pcf2123";
+		spi-max-frequency = <2450000>;
+		spi-cs-high;
+		reg = <3>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpminand>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,poll-retry-count = <100>;
+		sbs,i2c-retry-count = <100>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	fsl,weim-cs-gpr = <&gpr>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* pwr mcu alert irq */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+			/* remainder ???? */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068
+		>;
+	};
+
+	pinctrl_ecspi3cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1
+			MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1
+			MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi5cs: ecspi5csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpminand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
+		>;
+	};
+
+	pinctrl_weimcs: weimcsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1
+		>;
+	};
+
+	pinctrl_weimfpga: weimfpgagrp {
+		fsl,pins = <
+			/* weim misc */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1
+			MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1
+			MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1
+			MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1
+			MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1
+			/* weim data */
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
+			MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+			/* weim address */
+			MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1
+			MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0
+			/* usbh1_b OC */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1_hubreset: usbh1hubresetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 00bd63e63..b715deb4e 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -44,7 +44,7 @@
 			label = "recovery";
 			gpios = <&gpio3 16 1>;
 			linux,code = <0x198>; /* KEY_RESTART */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 822ffb231..0511137d1 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -145,7 +145,7 @@
 	status = "okay";
 
 	flash: m25p80@0 {
-		compatible = "sst,w25q256";
+		compatible = "sst,w25q256", "jedec,spi-nor";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
 	};
@@ -154,7 +154,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -327,7 +327,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&sw4_reg>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
new file mode 100644
index 000000000..65e66f994
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -0,0 +1,395 @@
+/*
+ * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-microsom.dtsi"
+#include "imx6qdl-microsom-ar8035.dtsi"
+
+/ {
+	model = "Auvidea H100";
+	compatible = "auvidea,h100", "fsl,imx6q";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi_osc: hdmi-osc {
+		compatible = "fixed-clock";
+		clock-output-names = "hdmi-osc";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_leds>;
+
+		led0: power {
+			label = "power";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led1: stream {
+			label = "stream";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2: rec {
+			label = "rec";
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		regulator-name = "V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_nvcc_sd2: regulator-nvcc-sd2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>;
+		compatible = "regulator-gpio";
+		regulator-name = "NVCC_SD2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+
+	reg_usbh1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
+		regulator-name = "USB_H1_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
+		regulator-name = "USB_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "H100 on-board codec";
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-ext-port = <5>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c1>;
+	status = "okay";
+
+	eeprom: 24c02@51 {
+		compatible = "microchip,24c02", "at24";
+		reg = <0x51>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	tc358743: tc358743@0f {
+		compatible = "toshiba,tc358743";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_tc358743>;
+		clocks = <&hdmi_osc>;
+		clock-names = "refclk";
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+		/* IRQ has a wrong pull resistor which renders it useless  */
+
+		port@0 {
+			tc358743_out: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				data-lanes = <1 2 3 4>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <297000000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	h100 {
+		pinctrl_h100_hdmi: h100-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_h100_i2c1: h100-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_i2c2: h100-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_leds: pinctrl-h100-leds {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_sgtl5000: h100-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+			>;
+		};
+
+		pinctrl_h100_tc358743: h100-tc358743 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_uart2: h100-uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+			>;
+		};
+
+		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2: h100-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
+			>;
+		};
+
+		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&tc358743_out>;
+			data-lanes = <1 2 3 4>;
+			clock-lanes = <0>;
+			clock-noncontinuous;
+			link-frequencies = /bits/ 64 <297000000>;
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_h100_usdhc2>;
+	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
new file mode 100644
index 000000000..005318865
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad SOM";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&i2c3 {
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
new file mode 100644
index 000000000..3f8013c85
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -0,0 +1,403 @@
+/*
+ * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Embest MarS Board i.MX6Dual";
+	compatible = "embest,imx6q-marsboard", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user1 {
+			label = "imx6:green:user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		user2 {
+			label = "imx6:green:user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	fsl,spi-num-chipselects = <1>;
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0	/* CAM_MCLK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000b1	/* CS0 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+			/* GPIO16 -> AR8035 25MHz */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* RGMII_nRST */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* LED1 */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* LED2 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* USB OTG POWER ENABLE */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* WP */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17009
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10009
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17009
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17009
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17009
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17009
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17009
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
new file mode 100644
index 000000000..d417457ca
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
+	compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
index a57866b2e..d1686339d 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts
+++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
@@ -3,12 +3,42 @@
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -16,8 +46,8 @@
 #include "imx6qdl-nitrogen6x.dtsi"
 
 / {
-	model = "Freescale i.MX6 Quad Nitrogen6x Board";
-	compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q";
+	model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
+	compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
new file mode 100644
index 000000000..5acd0c63b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -0,0 +1,785 @@
+/*
+ * Copyright 2015 Sutajio Ko-Usagi PTE LTD
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kosagi Novena Dual/Quad";
+	compatible = "kosagi,imx6q-novena", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 10000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_novena>;
+		power-supply = <&reg_lvds_lcd>;
+		brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
+		default-brightness-level = <12>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys_novena>;
+
+		user-button {
+			label = "User Button";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0>;	/* SW_LID */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_novena>;
+
+		heartbeat {
+			label = "novena:white:panel";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,n133hse-ea1", "simple-panel";
+		backlight = <&backlight>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio_codec: regulator-audio-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "es8328-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <400000>;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-display-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+		gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_lcd: regulator-lvds-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lvds-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie-bus-power";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_sata: regulator-sata {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <10000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-es8328";
+		model = "imx-audio-es8328";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-amp-supply = <&reg_audio_codec>;
+		jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+			"Speaker", "audio-amp",
+			"Headphone", "ROUT1",
+			"Headphone", "LOUT1",
+			"LINPUT1", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <0x1>;
+		mux-ext-port = <0x3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_novena>;
+	status = "okay";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_novena>;
+	fsl,spi-num-chipselects = <3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_novena>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	rxc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	txen-skew-ps = <0>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <3000>;
+	txd1-skew-ps = <3000>;
+	txd2-skew-ps = <3000>;
+	txd3-skew-ps = <3000>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_novena>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_novena>;
+	status = "okay";
+
+	accel: mma8452@1c {
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sbs_battery: bq20z75@0b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,i2c-retry-count = <50>;
+	};
+
+	touch: stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe_novena>;
+		vio-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_novena>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw1c: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3a: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3b: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw4: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+			};
+
+			reg_snvs: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vref: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen3: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_vgen4: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_novena>;
+	status = "okay";
+
+	codec: es8328@11 {
+		compatible = "everest,es8328";
+		reg = <0x11>;
+		DVDD-supply = <&reg_audio_codec>;
+		AVDD-supply = <&reg_audio_codec>;
+		PVDD-supply = <&reg_audio_codec>;
+		HPVDD-supply = <&reg_audio_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sound_novena>;
+		clocks = <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO1_SEL>,
+				  <&clks IMX6QDL_CLK_PLL4_AUDIO>,
+				  <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
+					 <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
+					 <&clks IMX6QDL_CLK_OSC>,
+					 <&clks IMX6QDL_CLK_CKO1_PODF>;
+		assigned-clock-rates = <0 0 722534400 22579200>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_novena>;
+	linux,keymap = <
+		MATRIX_KEY(1, 1, KEY_CONFIG)
+	>;
+	status = "okay";
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		fsl,panel = <&panel>;
+		status = "okay";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_novena>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sata {
+	target-supply = <&reg_sata>;
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <8>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_novena>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_novena>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_novena>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_novena>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_swbst>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_novena>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_novena>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux_novena: audmuxgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_novena: backlightgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3_novena: ecspi3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_enet_novena: enetgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b028
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b028
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b028
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* Ethernet reset */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_gpio: fpgagpiogrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_eim: fpgaeimgrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0f1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0f1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0f1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0f1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0f1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0f1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0f1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0f1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0f1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0f1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0f1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0f1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0f1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0f1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0f1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0f1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0f1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0f1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0f1
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0f1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0f1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb0f1
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0f1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0f1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb0f1
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK		0xb0f1
+		>;
+	};
+
+	pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+		fsl,pins = <
+			/* User button */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			/* PCIe Wakeup */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1f0e0
+			/* Lid switch */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_novena: hdmigrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1_novena: i2c1grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_novena: i2c2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_novena: i2c3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp_novena: kppgrp-novena {
+		fsl,pins = <
+			/* Front panel button */
+			MX6QDL_PAD_KEY_ROW1__KEY_ROW1		0x1b0b1
+			/* Fake column driver, not connected */
+			MX6QDL_PAD_KEY_COL1__KEY_COL1		0x1b0b1
+		>;
+	};
+
+	pinctrl_leds_novena: ledsgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21		0x1b0b1
+		>;
+	};
+
+	pinctrl_pcie_novena: pciegrp-novena {
+		fsl,pins = <
+			/* Reset */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1
+			/* Power On */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1
+			/* Wifi kill */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1
+		>;
+	};
+
+	pinctrl_sata_novena: satagrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b1
+		>;
+	};
+
+	pinctrl_senoko_novena: senokogrp-novena {
+		fsl,pins = <
+			/* Senoko IRQ line */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x13048
+			/* Senoko reset line */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1
+		>;
+	};
+
+	pinctrl_sound_novena: soundgrp-novena {
+		fsl,pins = <
+			/* Audio power regulator */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+			/* Headphone plug */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+		>;
+	};
+
+	pinctrl_stmpe_novena: stmpegrp-novena {
+		fsl,pins = <
+			/* Touchscreen interrupt */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_novena: uart2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_novena: uart3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_novena: uart4grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_novena: usbotggrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_novena: usdhc2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			/* Write protect */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+			/* Card detect */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3_novena: usdhc3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
index 3c2852b16..90ea61ae0 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -23,7 +23,7 @@
 
 &ecspi3 {
 	flash: m25p80@0 {
-		compatible = "sst,sst25vf032b";
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 96e4688be..66d10d8d5 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -2,12 +2,42 @@
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 5645d5285..d7c8ccb2d 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -91,34 +91,25 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
 
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_5p0v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 
 	sound-sgtl5000 {
@@ -150,7 +141,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -168,7 +159,7 @@
 	status = "okay";
 
 	sgtl5000: sgtl5000@0a {
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		compatible = "fsl,sgtl5000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
@@ -200,11 +191,15 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &sata {
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <16>;
+	fsl,receive-eq-mdB = <3000>;
 	status = "okay";
 };
 
@@ -253,6 +248,9 @@
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	status = "okay";
 };
 
@@ -263,6 +261,9 @@
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	status = "okay";
 };
 
@@ -270,163 +271,160 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
 	non-removable;
 	no-1-8-v;
 	status = "okay";
 };
 
 &iomuxc {
-	imx6q-tbs2910 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
+		>;
+	};
 
-		pinctrl_hdmi: hdmigrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
-			>;
-		};
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
+		>;
+	};
 
-		pinctrl_ir: irgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
+		>;
+	};
 
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
-			>;
-		};
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
+		>;
+	};
 
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
-			>;
-		};
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
-			>;
-		};
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
-			>;
-		};
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
+		>;
+	};
 
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
+		>;
+	};
 
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
-			>;
-		};
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
+		>;
+	};
 
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
-			>;
-		};
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
+		>;
 	};
 
-	gpio_fan {
-		pinctrl_gpio_fan: gpiofangrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
-			>;
-		};
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
+		>;
 	};
 
-	gpio_leds {
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
-			>;
-		};
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
index b18fae10b..65e95ae75 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -1,12 +1,42 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
index b58ec9c96..20cd0e7b3 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@@ -1,12 +1,42 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
index 0bb9a9de6..9ed243b70 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -1,12 +1,42 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -94,22 +124,6 @@
 	status = "disabled";
 };
 
-&iomuxc {
-	imx6qdl-tx6 {
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-			>;
-		};
-	};
-};
-
 &ipu1_di0_disp0 {
 	remote-endpoint = <&display0_in>;
 };
@@ -134,3 +148,17 @@
 	fsl,wp-controller;
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
index b96d80a35..347b531d3 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
@@ -1,12 +1,42 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -180,22 +210,6 @@
 	status = "disabled";
 };
 
-&iomuxc {
-	imx6qdl-tx6 {
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-			>;
-		};
-	};
-};
-
 &ipu1_di0_disp0 {
 	remote-endpoint = <&display0_in>;
 };
@@ -208,3 +222,17 @@
 	fsl,wp-controller;
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
new file mode 100644
index 000000000..7c152e327
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_2>;
+		interface-pix-fmt = "rgb24";
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&vga>;
+
+			vga: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&reg_lcd0_pwr {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
index 88aa1e4c7..0433e220a 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -1,12 +1,42 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -77,17 +107,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <22 0>;
 		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
-	};
-};
-
-&iomuxc {
-	imx6q-tx6q-1110 {
-		pinctrl_eeti: eetigrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-			>;
-		};
+		wakeup-source;
 	};
 };
 
@@ -152,3 +172,11 @@
 &sata {
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_eeti: eetigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
new file mode 100644
index 000000000..d78b129d0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
@@ -0,0 +1,264 @@
+/*
+ * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &lvds0;
+		ipu1 = &ipu2;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd0_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&i2c3 {
+	polytouch1: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti>;
+		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&kpp {
+	status = "disabled"; /* pads partially clash with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds0_timing1>;
+
+			lvds0_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			lvds0_timing2: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds1_timing2>;
+
+			lvds1_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			lvds1_timing1: VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			lvds1_timing2: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eeti: eetigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
new file mode 100644
index 000000000..61990630a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ * Copyright 2016 Christopher Spinrath
+ *
+ * Based on the devicetree distributed with the vendor kernel for the
+ * Utilite Pro:
+ *	Copyright 2013 CompuLab Ltd.
+ *	Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "imx6q-cm-fx6.dts"
+
+/ {
+	model = "CompuLab Utilite Pro";
+	compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q";
+
+	aliases {
+		ethernet1 = &eth1;
+		rtc0 = &em3027;
+		rtc1 = &snvs_rtc;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "at24,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	em3027: rtc@56 {
+		compatible = "emmicro,em3027";
+		reg = <0x56>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170B9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170B9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170B9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170F9
+		>;
+	};
+};
+
+&pcie {
+	pcie@0,0 {
+		reg = <0x000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* non-removable i211 ethernet card */
+		eth1: intel,i211@pcie0,0 {
+			reg = <0x010000 0 0 0 0>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	no-1-8-v;
+	broken-cd;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
index 20bf3c282..9207d80f9 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
@@ -13,7 +13,7 @@
 #include "imx6qdl-wandboard-revb1.dtsi"
 
 / {
-	model = "Wandboard i.MX6 Quad Board";
+	model = "Wandboard i.MX6 Quad Board rev B1";
 	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
 
 	memory {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 399103b8e..c30c8368c 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -14,6 +14,7 @@
 
 / {
 	aliases {
+		ipu1 = &ipu2;
 		spi4 = &ecspi5;
 	};
 
@@ -21,7 +22,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
@@ -103,42 +104,6 @@
 
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
-
-				ipu2 {
-					pinctrl_ipu2_1: ipu2grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10
-							MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0x10
-							MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0x10
-							MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0x10
-							MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04        0x80000000
-							MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0x10
-							MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0x10
-							MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0x10
-							MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0x10
-							MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0x10
-							MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0x10
-							MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0x10
-							MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0x10
-							MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0x10
-							MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0x10
-							MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0x10
-							MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0x10
-							MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0x10
-							MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0x10
-							MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0x10
-							MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0x10
-							MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16  0x10
-							MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17  0x10
-							MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18  0x10
-							MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19  0x10
-							MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20  0x10
-							MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21  0x10
-							MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22  0x10
-							MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23  0x10
-						>;
-					};
-				};
 			};
 		};
 
@@ -153,6 +118,16 @@
 			status = "disabled";
 		};
 
+		gpu_vg: gpu@02204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&gpc 1>;
+		};
+
 		ipu2: ipu@02800000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -179,21 +154,22 @@
 				#size-cells = <0>;
 				reg = <2>;
 
-				ipu2_di0_disp0: endpoint@0 {
+				ipu2_di0_disp0: disp0-endpoint {
 				};
 
-				ipu2_di0_hdmi: endpoint@1 {
+				ipu2_di0_hdmi: hdmi-endpoint {
 					remote-endpoint = <&hdmi_mux_2>;
 				};
 
-				ipu2_di0_mipi: endpoint@2 {
+				ipu2_di0_mipi: mipi-endpoint {
+					remote-endpoint = <&mipi_mux_2>;
 				};
 
-				ipu2_di0_lvds0: endpoint@3 {
+				ipu2_di0_lvds0: lvds0-endpoint {
 					remote-endpoint = <&lvds0_mux_2>;
 				};
 
-				ipu2_di0_lvds1: endpoint@4 {
+				ipu2_di0_lvds1: lvds1-endpoint {
 					remote-endpoint = <&lvds1_mux_2>;
 				};
 			};
@@ -203,18 +179,19 @@
 				#size-cells = <0>;
 				reg = <3>;
 
-				ipu2_di1_hdmi: endpoint@1 {
+				ipu2_di1_hdmi: hdmi-endpoint {
 					remote-endpoint = <&hdmi_mux_3>;
 				};
 
-				ipu2_di1_mipi: endpoint@2 {
+				ipu2_di1_mipi: mipi-endpoint {
+					remote-endpoint = <&mipi_mux_3>;
 				};
 
-				ipu2_di1_lvds0: endpoint@3 {
+				ipu2_di1_lvds0: lvds0-endpoint {
 					remote-endpoint = <&lvds0_mux_3>;
 				};
 
-				ipu2_di1_lvds1: endpoint@4 {
+				ipu2_di1_lvds1: lvds1-endpoint {
 					remote-endpoint = <&lvds1_mux_3>;
 				};
 			};
@@ -225,6 +202,11 @@
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
 	};
+
+	gpu-subsystem {
+		compatible = "fsl,imx-gpu-subsystem";
+		cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
new file mode 100644
index 000000000..315e033ff
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -0,0 +1,984 @@
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module";
+	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		status = "disabled";
+	};
+
+	/* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
+	i2cddc: i2c@0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_ddc>;
+		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		status = "disabled";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	/* on module USB hub */
+	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
+		regulator-name = "usb_host_vbus_hub";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <2000>;
+		enable-active-high;
+		status = "okay";
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_usb_host_vbus_hub>;
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6q-apalis-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Apalis SPI1 */
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "disabled";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@7 {
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
+ * board)
+ */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			reg = <0>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+	};
+};
+
+/*
+ * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dte>;
+	fsl,dte-mode;
+	status = "disabled";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dte>;
+	fsl,dte-mode;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	voltage-ranges = <3300 3300>;
+	status = "disabled";
+};
+
+/* SD1 */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	voltage-ranges = <3300 3300>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	voltage-ranges = <3300 3300>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	status = "disabled";
+};
+
+&iomuxc {
+	/* pins used on module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+
+	pinctrl_apalis_gpio1: gpio2io04grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio2: gpio2io05grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio3: gpio2io06grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio4: gpio2io07grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio5: gpio6io10grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio6: gpio6io09grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio7: gpio1io02grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio8: gpio1io06grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
+			/* SPI1 cs */
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			/* SPI2 cs */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			/* Ethernet PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			/* Ethernet PHY interrupt */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio1io04grp {
+		fsl,pins = <
+			/* Power button */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c_ddc: gpioi2cddcgrp {
+		fsl,pins = <
+			/* DDC bitbang */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
+			/* DE */
+			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
+			/* HSync */
+			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
+			/* VSync */
+			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
+			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
+			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
+			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
+			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
+			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
+			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
+			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
+			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
+			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
+			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
+			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
+			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
+			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
+			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
+			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
+			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
+			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
+			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
+			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
+			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
+			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
+			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
+			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
+			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
+		>;
+	};
+
+	pinctrl_ipu2_vdac: ipu2vdacgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
+			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
+			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
+			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
+			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
+			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
+			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
+			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
+			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
+			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
+			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
+			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
+			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
+			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
+			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
+			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
+			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
+			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
+			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
+			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
+		>;
+	};
+
+	pinctrl_mmc_cd: gpiommccdgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
+		fsl,pins = <
+			/* USBH_HUB_EN */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
+		fsl,pins = <
+			/* USBO1 power en */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
+		>;
+	};
+
+	pinctrl_reset_moci: gpioresetmocigrp {
+		fsl,pins = <
+			/* RESET_MOCI control */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_sd_cd: gpiosdcdgrp {
+		fsl,pins = <
+			/* SD1 CD */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dce: uart2dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart4_dte: uart4dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart5_dte: uart5dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index e26ebeb5b..edbce222c 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -94,7 +94,7 @@
 			label = "User button";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -213,7 +213,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -254,7 +254,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index f4d6ae564..54f4f0193 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -109,7 +109,7 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -143,14 +143,14 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index a47a0399a..7fff02c40 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -141,7 +141,7 @@
 	flash: m25p80@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <1>;
 	};
@@ -351,7 +351,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -364,7 +364,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 45e7c39e8..da1341d47 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -38,7 +38,7 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "sst,sst25vf040b", "m25p80";
+		compatible = "sst,sst25vf040b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index f2867c4b3..9d7ab6cdc 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -94,7 +94,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -174,6 +174,24 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -248,7 +266,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -295,6 +312,24 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 4493f6e99..7191b8477 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -151,10 +151,25 @@
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -229,7 +244,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -275,6 +290,18 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
@@ -316,10 +343,13 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
@@ -335,6 +365,15 @@
 			>;
 		};
 
+		pinctrl_ecspi3: escpi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+			>;
+		};
+
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
 				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
@@ -380,7 +419,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -427,6 +465,18 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_pwm4: pwm4grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
@@ -469,7 +519,34 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x1b0b0 /* CD */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index a857d1294..40d06b09d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -152,10 +152,17 @@
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -230,7 +237,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -247,7 +254,7 @@
 &ldb {
 	status = "okay";
 
-	lvds-channel@1 {
+	lvds-channel@0 {
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <18>;
 		status = "okay";
@@ -280,6 +287,18 @@
 	};
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
@@ -322,10 +341,13 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
@@ -385,7 +407,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -433,6 +454,18 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_pwm4: pwm4grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
@@ -476,7 +509,34 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* CD */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 1afe3385e..d6dbe2a88 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -142,10 +142,17 @@
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -260,6 +267,8 @@
 			swbst_reg: swbst {
 				regulator-min-microvolt = <5000000>;
 				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			snvs_reg: vsnvs {
@@ -319,7 +328,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&sw4_reg>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -336,7 +345,7 @@
 &ldb {
 	status = "okay";
 
-	lvds-channel@1 {
+	lvds-channel@0 {
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <18>;
 		status = "okay";
@@ -369,9 +378,28 @@
 	};
 };
 
-&pwm4 {
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default", "state_dio";
+	pinctrl-0 = <&pinctrl_pwm4_backlight>;
+	pinctrl-1 = <&pinctrl_pwm4_dio>;
 	status = "okay";
 };
 
@@ -415,10 +443,13 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
@@ -478,7 +509,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -526,12 +556,38 @@
 			>;
 		};
 
-		pinctrl_pwm4: pwm4grp {
+		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4_backlight: pwm4grpbacklight {
+			fsl,pins = <
+				/* LVDS_PWM J6.5 */
 				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
 			>;
 		};
 
+		pinctrl_pwm4_dio: pwm4grpdio {
+			fsl,pins = <
+				/* DIO3 J16.4 */
+				MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -568,6 +624,34 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index d1866a0a2..118bea524 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -198,6 +198,18 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &ssi1 {
 	status = "okay";
 };
@@ -250,7 +262,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -291,6 +302,18 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_uart2: uart2grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 5c6587f6c..f27f18455 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -164,6 +164,18 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -202,7 +214,6 @@
 				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
 				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
 				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
 				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
 				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
 				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
@@ -243,6 +254,18 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_uart2: uart2grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 6dd0b764e..d6c2358ff 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -48,7 +48,7 @@
 
 	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 5 1>;
+		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
 	};
@@ -67,7 +67,7 @@
 		reg_usbh1_vbus: usb-h1-vbus {
 			compatible = "regulator-fixed";
 			enable-active-high;
-			gpio = <&gpio1 0 0>;
+			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
 			regulator-name = "usb_h1_vbus";
@@ -78,7 +78,7 @@
 		reg_usbotg_vbus: usb-otg-vbus {
 			compatible = "regulator-fixed";
 			enable-active-high;
-			gpio = <&gpio3 22 0>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
 			regulator-name = "usb_otg_vbus";
@@ -253,7 +253,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
-	reset-gpio = <&gpio3 4 0>;
+	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
new file mode 100644
index 000000000..f8d945a56
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -0,0 +1,411 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD3_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	reg_sd4_vmmc: regulator-sd4-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD4_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhub>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
+		clock-names = "refclk";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	mdio {
+		eth_phy: ethernet-phy {
+			rxc-skew-ps = <1140>;
+			txc-skew-ps = <1140>;
+			txen-skew-ps = <600>;
+			rxdv-skew-ps = <240>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <600>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <240>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <240>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	clocks = <&clks IMX6QDL_CLK_USBOH3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmcc-supply = <&reg_sd3_vmmc>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-witdh=<4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	vmcc-supply = <&reg_sd4_vmmc>;
+	bus-witdh=<8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmux {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059	/* PCIe Reset */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06  0x1f059	/* HUB USB Reset */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1f059	/* CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1f059	/* PWR */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170B1
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100B1
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17070
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10070
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170B1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100B1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170F9
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100F9
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
index 6d4069cc9..3d62401db 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
@@ -143,7 +143,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -154,6 +154,7 @@
 	bus-width = <4>;
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	keep-power-in-suspend;
+	no-1-8-v;
 	non-removable;
 	vmmc-supply = <&reg_brcm>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
new file mode 100644
index 000000000..cfd50ea1e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -0,0 +1,631 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+	};
+
+	bt_rfkill {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_rfkill>;
+		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		name = "bt_rfkill";
+		type = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <102>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <158>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		j14-pin1 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j14-pin3 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j14-pins8-9 {
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j46-pin2 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j46-pin3 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+	};
+
+	backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight_lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	panel_lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-nit6xlite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	rtc@6f {
+		compatible = "isil,isl1208";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x6f>;
+		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_j10>;
+	pinctrl-1 = <&pinctrl_j28>;
+
+	imx6dl-nit6xlite {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_bt_rfkill: bt_rfkillgrp {
+			fsl,pins = <
+				/* BT wake */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* BT reset */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0b0b0
+				/* BT reg en */
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+				/* BT host wake irq */
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x100b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				/* Home Button: J14 pin 5 */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Back Button: J14 pin 7 */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				/* Touch IRQ: J7 pin 4 */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+				/* tcs2004 IRQ */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
+				/* tsc2004 reset */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
+			>;
+		};
+
+		pinctrl_j10: j10grp {
+			fsl,pins = <
+				/* Broadcom WiFi module pins */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+
+		pinctrl_j28: j28grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
+			>;
+		};
+
+		pinctrl_rtc: rtcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_wlan_vmmc>;
+	vqmmc-1-8-v;
+	ocr-limit = <0x180>;     /* 1.65v - 2.1v */
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
new file mode 100644
index 000000000..9677bf323
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -0,0 +1,874 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0xF0000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p8v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		reg_can_xcvr: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	i2cmux@2 {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
+			     &gpio4 15 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+
+		i2c2@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2cmux@3 {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c3@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		speaker-enable {
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		ttymxc4-rs232 {
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "on";
+		};
+	};
+
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight_lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight_lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel_lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel_lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel_lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_max-sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&iomuxc {
+	imx6q-nitrogen6_max {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2mux: i2c2muxgrp {
+			fsl,pins = <
+				/* ov5642 camera i2c enable */
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
+				/* ov5640_mipi camera i2c enable */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				/* PCIe I2C enable */
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				/* PCIe reset */
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_rv4162: rv4162grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
+				/* RS485 RX Enable: pull up */
+				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
+				/* RS485 DEN: pull down */
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
+				/* RS485/!RS232 Select: pull down (rs232) */
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
+				/* ON: pull down */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index d7fe6672d..97d9c3339 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -3,12 +3,42 @@
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -54,6 +84,30 @@
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
 		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_wlan_vmmc: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
 	};
 
 	gpio-keys {
@@ -65,7 +119,7 @@
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
@@ -113,7 +167,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -131,6 +185,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
@@ -149,6 +240,20 @@
 	status = "okay";
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
@@ -157,7 +262,7 @@
 	status = "okay";
 
 	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -182,6 +287,7 @@
 	txd3-skew-ps = <0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -199,7 +305,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -222,6 +328,21 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
+
+	touchscreen@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
 };
 
 &iomuxc {
@@ -233,6 +354,7 @@
 			fsl,pins = <
 				/* SGTL5000 sys_mclk */
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
 			>;
 		};
 
@@ -245,6 +367,20 @@
 			>;
 		};
 
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
 		pinctrl_ecspi1: ecspi1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
@@ -315,6 +451,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -356,6 +525,18 @@
 			>;
 		};
 
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+			>;
+		};
+
 		pinctrl_usdhc3: usdhc3grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
@@ -379,9 +560,22 @@
 				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
 			>;
 		};
+
+		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";
 
@@ -450,6 +644,27 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 9e6ecd99b..d6d98d426 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -12,7 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Phytec phyFLEX-i.MX6 Ouad";
+	model = "Phytec phyFLEX-i.MX6 Quad";
 	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
 
 	memory {
@@ -80,7 +80,7 @@
 	cs-gpios = <&gpio4 24 0>;
 
 	flash@0 {
-		compatible = "m25p80";
+		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -373,7 +373,7 @@
 };
 
 &pcie {
-	pinctrl-name = "default";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio4 17 0>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 3373fd958..cacf59337 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -35,7 +35,6 @@
 			compatible = "regulator-fixed";
 			reg = <1>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
 			regulator-name = "usbh1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -47,7 +46,6 @@
 			compatible = "regulator-fixed";
 			reg = <2>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotg>;
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -128,7 +126,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e329ca5c3..6aa193fb2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -28,6 +28,71 @@
 		};
 	};
 
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_audio: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "cs42888_supply";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif",
 			   "fsl,imx-sabreauto-spdif";
@@ -45,6 +110,19 @@
 	};
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
@@ -55,18 +133,29 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32";
+		compatible = "st,m25p32", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
 };
 
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -76,6 +165,10 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -180,6 +273,18 @@
 			};
 		};
 	};
+
+	codec: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+        };
+
 };
 
 &i2c3 {
@@ -257,6 +362,21 @@
 			>;
 		};
 
+		pinctrl_esai: esaigrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+			>;
+		};
+
 		pinctrl_gpio_leds: gpioledsgrp {
 			fsl,pins = <
 				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
@@ -318,6 +438,12 @@
 			>;
 		};
 
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+
 		pinctrl_usdhc3: usdhc3grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
@@ -462,6 +588,18 @@
 	status = "okay";
 };
 
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 782379320..f65fdfc25 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -2,12 +2,42 @@
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -53,6 +83,17 @@
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
 		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	gpio-keys {
@@ -64,7 +105,7 @@
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
@@ -112,7 +153,7 @@
 		mux-ext-port = <4>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -130,6 +171,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
@@ -148,6 +226,20 @@
 	status = "okay";
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
@@ -156,7 +248,7 @@
 	status = "okay";
 
 	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -181,6 +273,7 @@
 	txd3-skew-ps = <0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -198,7 +291,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -239,6 +332,20 @@
 			>;
 		};
 
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
 		pinctrl_ecspi1: ecspi1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
@@ -309,6 +416,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -377,6 +517,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 944eb81cb..d77ea9423 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -79,21 +79,21 @@
 		power {
 			label = "Power Button";
 			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_POWER>;
 		};
 
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
@@ -115,7 +115,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight {
+	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -133,6 +133,17 @@
 		        default-state = "on";
 		};
 	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
 };
 
 &audmux {
@@ -141,6 +152,13 @@
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 9 0>;
@@ -151,7 +169,7 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32";
+		compatible = "st,m25p32", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -231,6 +249,7 @@
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
+				regulator-ramp-delay = <6250>;
 			};
 
 			sw3a_reg: sw3a {
@@ -482,6 +501,12 @@
 				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+			>;
+		};
 	};
 
 	gpio_leds {
@@ -501,18 +526,11 @@
 		fsl,data-width = <18>;
 		status = "okay";
 
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
 			};
 		};
 	};
@@ -521,7 +539,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 0>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -584,3 +602,14 @@
 	no-1-8-v;
 	status = "okay";
 };
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index da08de324..ac9529f85 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -1,16 +1,47 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -36,11 +67,12 @@
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <0>;
+
 		mclk: clock@0 {
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
-			clock-frequency = <27000000>;
+			clock-frequency = <26000000>;
 		};
 	};
 
@@ -51,7 +83,7 @@
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -60,109 +92,95 @@
 
 		user_led: user {
 			label = "Heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_user_led>;
 			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3_etn: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3_ETN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy_power>;
-			gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_3v3_etn: regulator-3v3-etn {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_ETN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_etnphy_power>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_2v5: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2V5";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
 
-		reg_3v3: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_flexcan_xcvr>;
-			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-			enable-active-low;
-		};
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-low;
+	};
 
-		reg_lcd0_pwr: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "LCD0 POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd0_pwr>;
-			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-		};
+	reg_lcd0_pwr: regulator-lcd0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 
-		reg_lcd1_pwr: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "LCD1 POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd1_pwr>;
-			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-		};
+	reg_lcd1_pwr: regulator-lcd1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD1 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_pwr>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 
-		reg_usbh1_vbus: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1_vbus>;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usbotg_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "usbotg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotg_vbus>;
-			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
@@ -208,7 +226,7 @@
 		&gpio2 30 GPIO_ACTIVE_HIGH
 		&gpio3 19 GPIO_ACTIVE_HIGH
 	>;
-	status = "okay";
+	status = "disabled";
 
 	spidev0: spi@0 {
 		compatible = "spidev";
@@ -226,10 +244,29 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	phy-handle = <&etnphy>;
 	phy-supply = <&reg_3v3_etn>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet_mdio>;
+			interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
 };
 
 &gpmi {
@@ -272,10 +309,10 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_edt_ft5x06>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <15 0>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
+		wakeup-source;
 	};
 
 	touchscreen: tsc2007@48 {
@@ -287,7 +324,7 @@
 		interrupts = <26 0>;
 		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <660>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -295,310 +332,318 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	imx6qdl-tx6 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* LED */
-				MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
-			>;
-		};
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
+		>;
+	};
 
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW1__AUD5_RXD		0x130b0 /* SSI1_RXD */
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0 /* SSI1_TXD */
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0 /* SSI1_CLK */
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0 /* SSI1_FS */
-			>;
-		};
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__AUD5_RXD		0x130b0 /* SSI1_RXD */
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0 /* SSI1_TXD */
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0 /* SSI1_CLK */
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0 /* SSI1_FS */
+		>;
+	};
 
-		pinctrl_disp0_1: disp0grp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				/* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
+	pinctrl_disp0_1: disp0grp-1 {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			/* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
 
-		pinctrl_disp0_2: disp0grp-2 {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
+	pinctrl_disp0_2: disp0grp-2 {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
 
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x0b0b0
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x0b0b0
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x0b0b0
-				MX6QDL_PAD_GPIO_19__ECSPI1_RDY		0x0b0b0
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x0b0b0 /* SPI CS0 */
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x0b0b0 /* SPI CS1 */
-			>;
-		};
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x0b0b0
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x0b0b0
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x0b0b0
+			MX6QDL_PAD_GPIO_19__ECSPI1_RDY		0x0b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x0b0b0 /* SPI CS0 */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x0b0b0 /* SPI CS1 */
+		>;
+	};
 
-		pinctrl_edt_ft5x06: edt-ft5x06grp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22  	0x1b0b0 /* Reset */
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21  	0x1b0b0 /* Wake */
-			>;
-		};
+	pinctrl_edt_ft5x06: edt-ft5x06grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22  	0x1b0b0 /* Reset */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21  	0x1b0b0 /* Wake */
+		>;
+	};
 
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+		>;
+	};
 
-		pinctrl_etnphy_power: etnphy-pwrgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
-			>;
-		};
+	pinctrl_enet_mdio: enet-mdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+		>;
+	};
 
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-				MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-			>;
-		};
+	pinctrl_etnphy_power: etnphy-pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
+		>;
+	};
 
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
-			>;
-		};
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
 
-		pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b0 /* Flexcan XCVR enable */
-			>;
-		};
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE    	0x0b0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE    	0x0b0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B  	0x0b0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B  	0x0b0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B     	0x0b0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B     	0x0b0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00  	0x0b0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01  	0x0b0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02  	0x0b0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03  	0x0b0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04  	0x0b0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05  	0x0b0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06  	0x0b0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07  	0x0b0b1
-			>;
-		};
+	pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b0 /* Flexcan XCVR enable */
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE    	0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE    	0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B  	0x0b0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B  	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B     	0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B     	0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00  	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01  	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02  	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03  	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04  	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05  	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06  	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07  	0x0b0b1
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__KEY_COL6		0x1b0b1
-				MX6QDL_PAD_GPIO_4__KEY_COL7		0x1b0b1
-				MX6QDL_PAD_KEY_COL2__KEY_COL2		0x1b0b1
-				MX6QDL_PAD_KEY_COL3__KEY_COL3		0x1b0b1
-				MX6QDL_PAD_GPIO_2__KEY_ROW6		0x1b0b1
-				MX6QDL_PAD_GPIO_5__KEY_ROW7		0x1b0b1
-				MX6QDL_PAD_KEY_ROW2__KEY_ROW2		0x1b0b1
-				MX6QDL_PAD_KEY_ROW3__KEY_ROW3		0x1b0b1
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_lcd0_pwr: lcd0-pwrgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1 /* LCD Reset */
-			>;
-		};
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__KEY_COL6		0x1b0b1
+			MX6QDL_PAD_GPIO_4__KEY_COL7		0x1b0b1
+			MX6QDL_PAD_KEY_COL2__KEY_COL2		0x1b0b1
+			MX6QDL_PAD_KEY_COL3__KEY_COL3		0x1b0b1
+			MX6QDL_PAD_GPIO_2__KEY_ROW6		0x1b0b1
+			MX6QDL_PAD_GPIO_5__KEY_ROW7		0x1b0b1
+			MX6QDL_PAD_KEY_ROW2__KEY_ROW2		0x1b0b1
+			MX6QDL_PAD_KEY_ROW3__KEY_ROW3		0x1b0b1
+		>;
+	};
 
-		pinctrl_lcd1_pwr: lcd1-pwrgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* LCD Power Enable */
-			>;
-		};
+	pinctrl_lcd0_pwr: lcd0-pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1 /* LCD Reset */
+		>;
+	};
 
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
-			>;
-		};
+	pinctrl_lcd1_pwr: lcd-pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* LCD Power Enable */
+		>;
+	};
 
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
-			>;
-		};
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_tsc2007: tsc2007grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0 /* Interrupt */
-			>;
-		};
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_tsc2007: tsc2007grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0 /* Interrupt */
+		>;
+	};
 
-		pinctrl_uart1_rtscts: uart1_rtsctsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT1__UART1_RTS_B	0x1b0b1
-				MX6QDL_PAD_SD3_DAT0__UART1_CTS_B	0x1b0b1
-			>;
-		};
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_uart1_rtscts: uart1_rtsctsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT1__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD3_DAT0__UART1_CTS_B	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart2_rtscts: uart2_rtsctsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
-				MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_uart2_rtscts: uart2_rtsctsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart3_rtscts: uart3_rtsctsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT3__UART3_CTS_B	0x1b0b1
-				MX6QDL_PAD_SD3_RST__UART3_RTS_B		0x1b0b1
-			>;
-		};
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
 
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b0 /* USBH1_VBUSEN */
-			>;
-		};
+	pinctrl_uart3_rtscts: uart3_rtsctsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT3__UART3_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD3_RST__UART3_RTS_B		0x1b0b1
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x17059
-			>;
-		};
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b0 /* USBH1_VBUSEN */
+		>;
+	};
 
-		pinctrl_usbotg_vbus: usbotg-vbusgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* USBOTG_VBUSEN */
-			>;
-		};
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x17059
+		>;
+	};
 
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
-				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
-				MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
-			>;
-		};
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* USBOTG_VBUSEN */
+		>;
+	};
 
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x070b1
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x070b1
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x070b1
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x070b1
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x070b1
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x070b1
-				MX6QDL_PAD_SD3_CLK__GPIO7_IO03		0x170b0 /* SD2 CD */
-			>;
-		};
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+			MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x070b1
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x070b1
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x070b1
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x070b1
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x070b1
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x070b1
+			MX6QDL_PAD_SD3_CLK__GPIO7_IO03		0x170b0 /* SD2 CD */
+		>;
+	};
+
+	pinctrl_user_led: user-ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* LED */
+		>;
 	};
 };
 
@@ -643,19 +688,22 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 1211da894..3bee2f910 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -10,14 +10,49 @@
  */
 
 / {
+	aliases {
+		backlight = &backlight;
+		panelchan = &panelchan;
+		panel7 = &panel7;
+		touchscreenp7 = &touchscreenp7;
+	};
+
 	chosen {
 		stdout-path = &uart2;
 	};
 
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio1 4 0>;
+		default-on;
+		status = "disabled";
+	};
+
 	memory {
 		reg = <0x10000000 0x40000000>;
 	};
 
+	panel7: panel7 {
+		/*
+		 * in reality it is a -20t (parallel) model,
+		 * but with LVDS bridge chip attached,
+		 * so it is equivalent to -19t model in drive
+		 * characteristics
+		 */
+		compatible = "urt,umsh-8596md-19t";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_panel>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -33,6 +68,26 @@
 			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
 			gpio = <&gpio7 12 0>;
 		};
+
+		reg_panel: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd_panel";
+			enable-active-high;
+			gpio = <&gpio1 2 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-udoo-ac97",
+			     "fsl,imx-audio-ac97";
+		model = "fsl,imx6q-udoo-ac97";
+		audio-cpu = <&ssi1>;
+		audio-routing =
+			"RX", "Mic Jack",
+			"Headphone Jack", "TX";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
 	};
 };
 
@@ -55,6 +110,24 @@
 	status = "okay";
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreenp7: touchscreenp7@55 {
+		compatible = "sitronix,st1232";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreenp7>;
+		reg = <0x55>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 8>;
+		gpios = <&gpio1 15 0>;
+		status = "disabled";
+	};
+};
+
 &iomuxc {
 	imx6q-udoo {
 		pinctrl_enet: enetgrp {
@@ -85,6 +158,27 @@
 			>;
 		};
 
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+			>;
+		};
+
+		pinctrl_panel: panelgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
+			>;
+		};
+
+		pinctrl_touchscreenp7: touchscreenp7grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+			>;
+		};
+
 		pinctrl_uart2: uart2grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
@@ -109,6 +203,50 @@
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
 			>;
 		};
+
+		pinctrl_ac97_running: ac97running {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_warm_reset: ac97warmreset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_reset: ac97reset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	panelchan: lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
 	};
 };
 
@@ -122,7 +260,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh>;
 	vbus-supply = <&reg_usb_h1_vbus>;
-	clocks = <&clks 201>;
+	clocks = <&clks IMX6QDL_CLK_CKO>;
 	status = "okay";
 };
 
@@ -132,3 +270,18 @@
 	non-removable;
 	status = "okay";
 };
+
+&audmux {
+	status = "okay";
+};
+
+&ssi1 {
+	cell-index = <0>;
+	fsl,mode = "ac97-slave";
+	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
+	pinctrl-0 = <&pinctrl_ac97_running>;
+	pinctrl-1 = <&pinctrl_ac97_reset>;
+	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
+	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 9e096d811..3ffe00c55 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -85,7 +85,7 @@
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -211,6 +211,7 @@
 	phy-reset-gpios = <&gpio3 29 0>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -233,7 +234,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 72ae58922..be2e7475e 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -30,6 +30,7 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		ipu0 = &ipu1;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
@@ -47,15 +48,6 @@
 		usbphy1 = &usbphy2;
 	};
 
-	intc: interrupt-controller@00a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-		interrupt-parent = <&intc>;
-	};
-
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -147,6 +139,27 @@
 			};
 		};
 
+		gpu_3d: gpu@00130000 {
+			compatible = "vivante,gc";
+			reg = <0x00130000 0x4000>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU3D_CORE>,
+				 <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+			clock-names = "bus", "core", "shader";
+			power-domains = <&gpc 1>;
+		};
+
+		gpu_2d: gpu@00134000 {
+			compatible = "vivante,gc";
+			reg = <0x00134000 0x4000>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&gpc 1>;
+		};
+
 		timer@00a00600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
@@ -155,6 +168,15 @@
 			clocks = <&clks IMX6QDL_CLK_TWD>;
 		};
 
+		intc: interrupt-controller@00a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
 		L2: l2-cache@00a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
@@ -163,6 +185,7 @@
 			cache-level = <2>;
 			arm,tag-latency = <4 2 3>;
 			arm,data-latency = <4 2 3>;
+			arm,shared-override;
 		};
 
 		pcie: pcie@0x01000000 {
@@ -173,8 +196,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
-				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
+			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
 				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -218,16 +240,16 @@
 					dmas = <&sdma 14 18 0>,
 					       <&sdma 15 18 0>;
 					dma-names = "rx", "tx";
-					clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>,
-						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>,
-						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
-						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
-						 <&clks IMX6QDL_CLK_DUMMY>;
+					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
+						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",
 						      "rxtx3", "rxtx4",
 						      "rxtx5", "rxtx6",
-						      "rxtx7";
+						      "rxtx7", "spba";
 					status = "disabled";
 				};
 
@@ -240,7 +262,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -254,7 +276,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -268,7 +290,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -282,7 +304,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -300,8 +322,19 @@
 				};
 
 				esai: esai@02024000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_ESAI_MEM>,
+						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "core", "mem", "extal", "fsys", "spba";
+					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
 				};
 
 				ssi1: ssi@02028000 {
@@ -353,8 +386,28 @@
 				};
 
 				asrc: asrc@02034000 {
+					compatible = "fsl,imx53-asrc";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+						<&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+							"txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
 				};
 
 				spba@0203c000 {
@@ -569,7 +622,7 @@
 					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
-				regulator-1p1@110 {
+				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
 					regulator-min-microvolt = <800000>;
@@ -583,7 +636,7 @@
 					anatop-max-voltage = <1375000>;
 				};
 
-				regulator-3p0@120 {
+				regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2800000>;
@@ -597,7 +650,7 @@
 					anatop-max-voltage = <3400000>;
 				};
 
-				regulator-2p5@130 {
+				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
 					regulator-min-microvolt = <2000000>;
@@ -611,7 +664,7 @@
 					anatop-max-voltage = <2750000>;
 				};
 
-				reg_arm: regulator-vddcore@140 {
+				reg_arm: regulator-vddcore {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddarm";
 					regulator-min-microvolt = <725000>;
@@ -628,7 +681,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_pu: regulator-vddpu@140 {
+				reg_pu: regulator-vddpu {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
@@ -645,7 +698,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_soc: regulator-vddsoc@140 {
+				reg_soc: regulator-vddsoc {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddsoc";
 					regulator-min-microvolt = <725000>;
@@ -687,22 +740,23 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs>;
+					offset = <0x34>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
@@ -836,10 +890,30 @@
 			reg = <0x02100000 0x100000>;
 			ranges;
 
-			caam@02100000 {
-				reg = <0x02100000 0x40000>;
-				interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			crypto: caam@2100000 {
+				compatible = "fsl,sec-v4.0";
+				fsl,sec-era = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2100000 0x10000>;
+				ranges = <0 0x2100000 0x10000>;
+				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
+					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
+					 <&clks IMX6QDL_CLK_CAAM_IPG>,
+					 <&clks IMX6QDL_CLK_EIM_SLOW>;
+				clock-names = "mem", "aclk", "ipg", "emi_slow";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
 			};
 
 			aipstz@0217c000 { /* AIPSTZ2 */
@@ -853,6 +927,9 @@
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -864,6 +941,9 @@
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -874,6 +954,9 @@
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -884,6 +967,9 @@
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 3>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -1015,6 +1101,7 @@
 			ocotp: ocotp@021bc000 {
 				compatible = "fsl,imx6q-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6QDL_CLK_IIM>;
 			};
 
 			tzasc@021d0000 { /* TZASC1 */
@@ -1145,22 +1232,22 @@
 				#size-cells = <0>;
 				reg = <2>;
 
-				ipu1_di0_disp0: endpoint@0 {
+				ipu1_di0_disp0: disp0-endpoint {
 				};
 
-				ipu1_di0_hdmi: endpoint@1 {
+				ipu1_di0_hdmi: hdmi-endpoint {
 					remote-endpoint = <&hdmi_mux_0>;
 				};
 
-				ipu1_di0_mipi: endpoint@2 {
+				ipu1_di0_mipi: mipi-endpoint {
 					remote-endpoint = <&mipi_mux_0>;
 				};
 
-				ipu1_di0_lvds0: endpoint@3 {
+				ipu1_di0_lvds0: lvds0-endpoint {
 					remote-endpoint = <&lvds0_mux_0>;
 				};
 
-				ipu1_di0_lvds1: endpoint@4 {
+				ipu1_di0_lvds1: lvds1-endpoint {
 					remote-endpoint = <&lvds1_mux_0>;
 				};
 			};
@@ -1170,22 +1257,22 @@
 				#size-cells = <0>;
 				reg = <3>;
 
-				ipu1_di0_disp1: endpoint@0 {
+				ipu1_di1_disp1: disp1-endpoint {
 				};
 
-				ipu1_di1_hdmi: endpoint@1 {
+				ipu1_di1_hdmi: hdmi-endpoint {
 					remote-endpoint = <&hdmi_mux_1>;
 				};
 
-				ipu1_di1_mipi: endpoint@2 {
+				ipu1_di1_mipi: mipi-endpoint {
 					remote-endpoint = <&mipi_mux_1>;
 				};
 
-				ipu1_di1_lvds0: endpoint@3 {
+				ipu1_di1_lvds0: lvds0-endpoint {
 					remote-endpoint = <&lvds0_mux_1>;
 				};
 
-				ipu1_di1_lvds1: endpoint@4 {
+				ipu1_di1_lvds1: lvds1-endpoint {
 					remote-endpoint = <&lvds1_mux_1>;
 				};
 			};
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
new file mode 100644
index 000000000..a39b86036
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board";
+	compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
new file mode 100644
index 000000000..5ce3840d8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+&i2c2 {
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx6qdl-sabreauto {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+	};
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
new file mode 100644
index 000000000..b23458062
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&cpu0 {
+	arm-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+	imx6qdl-sabresd {
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
new file mode 100644
index 000000000..886dbf2ec
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q.dtsi"
+
+/ {
+	soc {
+		ocram2: sram@00940000 {
+			compatible = "mmio-sram";
+			reg = <0x00940000 0x20000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		ocram3: sram@00960000 {
+			compatible = "mmio-sram";
+			reg = <0x00960000 0x20000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		ipu1: ipu@02400000 {
+			compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+			clocks = <&clks IMX6QDL_CLK_IPU1>,
+				 <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>,
+				 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+				 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
+				 <&clks IMX6QDL_CLK_PRG0_APB>;
+			clock-names = "bus",
+				      "di0", "di1",
+				      "di0_sel", "di1_sel",
+				      "ldb_di0", "ldb_di1", "prg";
+		};
+
+		ipu2: ipu@02800000 {
+			compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+			clocks = <&clks IMX6QDL_CLK_IPU2>,
+				 <&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>,
+				 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+				 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
+				 <&clks IMX6QDL_CLK_PRG1_APB>;
+			clock-names = "bus",
+				      "di0", "di1",
+				      "di0_sel", "di1_sel",
+				      "ldb_di0", "ldb_di1", "prg";
+		};
+
+		pcie: pcie@0x01000000 {
+			compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index b84dff2e9..be118820e 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -126,7 +126,7 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32";
+		compatible = "st,m25p32", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
index 0da906bd8..72c7745f5 100644
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -61,7 +61,9 @@
 	usdhc3_pwrseq: usdhc3_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
+			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
 			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
+			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
 			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
 			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
 	};
@@ -73,16 +75,16 @@
 	status = "okay";
 };
 
-&uart2 {
+&uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };
 
-&uart3 {
+&uart5 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -116,7 +118,7 @@
 	bus-width = <4>;
 	non-removable;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	mmc-pwrseq = <&usdhc3_pwrseq>;
 	status = "okay";
 };
@@ -130,14 +132,6 @@
 			>;
 		};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6SL_PAD_EPDC_D12__UART2_RX_DATA	0x41b0b1
-				MX6SL_PAD_EPDC_D13__UART2_TX_DATA	0x41b0b1
-				MX6SL_PAD_EPDC_D14__UART2_RTS_B		0x4130B1
-				MX6SL_PAD_EPDC_D15__UART2_CTS_B		0x4130B1
-			>;
-		};
 
 		pinctrl_uart3: uart3grp {
 			fsl,pins = <
@@ -146,6 +140,15 @@
 			>;
 		};
 
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
+				MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
+				MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
+				MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
+			>;
+		};
+
 		pinctrl_usdhc2: usdhc2grp {
 			fsl,pins = <
 				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
@@ -158,6 +161,7 @@
 				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
 				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
 				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
 			>;
 		};
 
@@ -173,6 +177,7 @@
 				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
 				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
 				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
 			>;
 		};
 
@@ -188,6 +193,7 @@
 				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
 				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
 				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 1157f2d58..7fa0e4535 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -135,8 +135,24 @@
 				ranges;
 
 				spdif: spdif@02004000 {
+					compatible = "fsl,imx6sl-spdif",
+						"fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+						<&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
+						 <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						"rxtx1", "rxtx2",
+						"rxtx3", "rxtx4",
+						"rxtx5", "rxtx6",
+						"rxtx7", "spba";
+					status = "disabled";
 				};
 
 				ecspi1: ecspi@02008000 {
@@ -445,7 +461,7 @@
 					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
-				regulator-1p1@110 {
+				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
 					regulator-min-microvolt = <800000>;
@@ -459,7 +475,7 @@
 					anatop-max-voltage = <1375000>;
 				};
 
-				regulator-3p0@120 {
+				regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2800000>;
@@ -473,7 +489,7 @@
 					anatop-max-voltage = <3400000>;
 				};
 
-				regulator-2p5@130 {
+				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
 					regulator-min-microvolt = <2100000>;
@@ -487,7 +503,7 @@
 					anatop-max-voltage = <2850000>;
 				};
 
-				reg_arm: regulator-vddcore@140 {
+				reg_arm: regulator-vddcore {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddarm";
 					regulator-min-microvolt = <725000>;
@@ -504,7 +520,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_pu: regulator-vddpu@140 {
+				reg_pu: regulator-vddpu {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
@@ -521,7 +537,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_soc: regulator-vddsoc@140 {
+				reg_soc: regulator-vddsoc {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddsoc";
 					regulator-min-microvolt = <725000>;
@@ -563,22 +579,23 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs>;
+					offset = <0x34>;
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
 			};
@@ -669,8 +686,11 @@
 			};
 
 			dcp: dcp@020fc000 {
+				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
 				reg = <0x020fc000 0x4000>;
-				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 101 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -688,6 +708,9 @@
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -698,6 +721,9 @@
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -708,6 +734,9 @@
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -824,6 +853,7 @@
 			ocotp: ocotp@021bc000 {
 				compatible = "fsl,imx6sl-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SL_CLK_OCOTP>;
 			};
 
 			audmux: audmux@021d8000 {
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
new file mode 100644
index 000000000..9b817f350
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -0,0 +1,709 @@
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
+	compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
+
+	aliases {
+		fb_lcd = &lcdif1;
+		t_lcd = &t_lcd;
+	};
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_3p3v>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can1_3v3: regulator-can1-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wlan>;
+		compatible = "regulator-fixed";
+		clocks = <&clks IMX6SX_CLK_CKO>;
+		clock-names = "slow";
+		regulator-name = "wlan-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+		gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6sx-nitrogen6sx-sgtl5000";
+		cpu-dai = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xc0000>;
+			read-only;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x2000>;
+			read-only;
+		};
+
+		partition@c2000 {
+			label = "Kernel";
+			reg = <0xc2000 0x11e000>;
+		};
+
+		partition@1e0000 {
+			label = "M4";
+			reg = <0x1e0000 0x20000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_3p3v>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@4 {
+			reg = <4>;
+		};
+
+		ethphy2: ethernet-phy@5 {
+			reg = <5>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+	phy-supply = <&reg_3p3v>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6SX_CLK_CKO2>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+		VDDD-supply = <&reg_1p8v>;
+		assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
+				  <&clks IMX6SX_CLK_CKO2>;
+		assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
+		assigned-clock-rates = <0>, <24000000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif1>;
+	lcd-supply = <&reg_3p3v>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&t_lcd>;
+			t_lcd: t_lcd_default {
+				clock-frequency = <74160000>;
+				hactive = <1280>;
+				vactive = <720>;
+				hback-porch = <220>;
+				hfront-porch = <110>;
+				vback-porch = <20>;
+				vfront-porch = <5>;
+				hsync-len = <40>;
+				vsync-len = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	dr_mode = "host";
+	disable-over-current;
+	reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_wlan>;
+	cap-power-off-card;
+	cap-sdio-irq;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio7>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD	0x1b0b0
+			MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC	0x1b0b0
+			MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS	0x1b0b0
+			MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL1__ECSPI1_MISO		0x100b1
+			MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI		0x100b1
+			MX6SX_PAD_KEY_COL0__ECSPI1_SCLK		0x100b1
+			MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x0b0b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0x1b0b0
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0x1b0b0
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0x30b1
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0x30b1
+			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0x30b1
+			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0x30b1
+			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0x30b1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0x30b1
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+			MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0xb0b0
+			MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4	0xb0b0
+			MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5	0xb0b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0x30b1
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0x30b1
+			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0x30b1
+			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0x30b1
+			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0x30b1
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0x30b1
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
+			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+			MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0xb0b0
+			MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8	0xb0b0
+			MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0xb0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b0b0
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b0b0
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24	0x0b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1	0x1b0b0
+			MX6SX_PAD_NAND_CLE__GPIO4_IO_3		0x1b0b0
+			MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x1b0b0
+			MX6SX_PAD_NAND_WE_B__GPIO4_IO_14	0x1b0b0
+			MX6SX_PAD_NAND_WP_B__GPIO4_IO_15	0x1b0b0
+			MX6SX_PAD_NAND_READY_B__GPIO4_IO_13	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19	0x1b0b0
+			MX6SX_PAD_SD1_CMD__CCM_CLKO1		0x000b0
+			MX6SX_PAD_SD3_DATA5__GPIO7_IO_7		0x1b0b0
+			/* Test points */
+			MX6SX_PAD_NAND_DATA04__GPIO4_IO_8	0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO03__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+			MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcdif1: lcdif1grp {
+		fsl,pins = <
+			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
+			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE	0x4001b0b0
+			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC	0x4001b0b0
+			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC	0x4001b0b0
+			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22	0x4001b0b0
+			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23	0x4001b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_DATA05__GPIO4_IO_9	0xb0b0
+			MX6SX_PAD_NAND_DATA06__GPIO4_IO_10	0xb0b0
+			MX6SX_PAD_NAND_DATA07__GPIO4_IO_11	0xb0b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO13__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_reg_wlan: reg-wlangrp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_DATA4__GPIO7_IO_6		0x1b0b0
+			MX6SX_PAD_GPIO1_IO11__CCM_CLKO1		0x000b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO12__CCM_CLKO2		0x000b0
+			MX6SX_PAD_ENET1_COL__GPIO2_IO_0		0x1b0b0
+			MX6SX_PAD_ENET1_CRS__GPIO2_IO_1		0x1b0b0
+			MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22	0xb0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	0x1b0b1
+			MX6SX_PAD_QSPI1B_SCLK__UART3_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
+			MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
+			MX6SX_PAD_SD3_DATA6__UART3_RTS_B	0x1b0b1
+			MX6SX_PAD_SD3_DATA7__UART3_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x1b0b0
+			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x170b1
+		>;
+	};
+
+	pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26	0xb0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			MX6SX_PAD_KEY_COL2__GPIO2_IO_12		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10071
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17071
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17071
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17071
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17071
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10071
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17071
+			MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B	0x17071
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17071
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17071
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17071
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17071
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x17071
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x17071
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x17071
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x17071
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170b9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170b9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170b9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170b9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170b9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170b9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170b9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170f9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170f9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170f9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170f9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170f9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170f9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170f9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 115f3fd78..240a2864d 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -52,7 +52,7 @@
 	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	vmmc-supply = <&vcc_sd3>;
 	status = "okay";
 };
@@ -64,7 +64,7 @@
 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakup;
+	wakeup-source;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index c76b87cba..71005478c 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -129,7 +129,7 @@
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl128s";
+		compatible = "spansion,s25fl128s", "jedec,spi-nor";
 		spi-max-frequency = <66000000>;
 	};
 
@@ -137,7 +137,7 @@
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl128s";
+		compatible = "spansion,s25fl128s", "jedec,spi-nor";
 		spi-max-frequency = <66000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts
new file mode 100644
index 000000000..0155450d6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb-sai.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2016 NXP Semiconductors
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6sx-sdb.dts"
+
+/ {
+	sound {
+		audio-cpu = <&sai1>;
+	};
+};
+
+&audmux {
+	/* pin conflict with sai */
+	status = "disabled";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sdma {
+	gpr = <&gpr>;
+	/* SDMA event remap for SAI1 */
+	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
+};
+
+&ssi2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 0bfc4e786..5bb8fd57e 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -18,12 +18,14 @@
 		996000  1250000
 		792000  1175000
 		396000  1175000
+		198000  1175000
 		>;
 	fsl,soc-operating-points = <
 		/* ARM kHz      SOC uV */
 		996000	1250000
 		792000	1175000
 		396000	1175000
+		198000  1175000
 	>;
 };
 
@@ -130,7 +132,7 @@
 	flash0: n25q256a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		reg = <0>;
 	};
@@ -138,7 +140,7 @@
 	flash1: n25q256a@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		reg = <1>;
 	};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index ac88c3467..9d70cfd40 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -114,7 +114,7 @@
 			regulator-name = "peri_3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
-			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 			regulator-always-on;
 		};
@@ -184,6 +184,13 @@
 	status = "okay";
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
 &i2c4 {
         clock-frequency = <100000>;
         pinctrl-names = "default";
@@ -247,6 +254,12 @@
 	status = "okay";
 };
 
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "disabled";
+};
+
 &ssi2 {
 	status = "okay";
 };
@@ -260,7 +273,7 @@
 &uart5 { /* for bluetooth */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -283,7 +296,7 @@
 	non-removable;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	status = "okay";
 };
 
@@ -296,7 +309,7 @@
 	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	vmmc-supply = <&vcc_sd3>;
 	status = "okay";
 };
@@ -309,6 +322,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6x-sdb {
 		pinctrl_audmux: audmuxgrp {
@@ -378,6 +397,13 @@
 			>;
 		};
 
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+			>;
+		};
+
 		pinctrl_i2c4: i2c4grp {
 			fsl,pins = <
 				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
@@ -454,6 +480,16 @@
 			>;
 		};
 
+		pinctrl_sai1: sai1grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
+				MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
+				MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
+				MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
@@ -558,5 +594,11 @@
 				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 83c61ae78..fad14bdf9 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/imx6sx-clock.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "imx6sx-pinfunc.h"
 #include "skeleton.dtsi"
@@ -62,12 +63,14 @@
 				996000  1250000
 				792000  1175000
 				396000  1075000
+				198000	975000
 			>;
 			fsl,soc-operating-points = <
 				/* ARM kHz  SOC uV */
 				996000      1175000
 				792000      1175000
 				396000      1175000
+				198000	    1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX6SX_CLK_ARM>,
@@ -210,7 +213,7 @@
 					dmas = <&sdma 14 18 0>,
 					       <&sdma 15 18 0>;
 					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SX_CLK_SPDIF>,
+					clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
 						 <&clks IMX6SX_CLK_OSC>,
 						 <&clks IMX6SX_CLK_SPDIF>,
 						 <&clks 0>, <&clks 0>, <&clks 0>,
@@ -221,7 +224,7 @@
 						      "rxtx1", "rxtx2",
 						      "rxtx3", "rxtx4",
 						      "rxtx5", "rxtx6",
-						      "rxtx7", "dma";
+						      "rxtx7", "spba";
 					status = "disabled";
 				};
 
@@ -294,7 +297,7 @@
 						 <&clks IMX6SX_CLK_ESAI_IPG>,
 						 <&clks IMX6SX_CLK_SPBA>;
 					clock-names = "core", "mem", "extal",
-						      "fsys", "dma";
+						      "fsys", "spba";
 					status = "disabled";
 				};
 
@@ -347,7 +350,7 @@
 						 <&clks IMX6SX_CLK_ASRC_IPG>,
 						 <&clks IMX6SX_CLK_SPDIF>,
 						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "mem", "ipg", "asrck", "dma";
+					clock-names = "mem", "ipg", "asrck", "spba";
 					dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
 					       <&sdma 19 20 1>, <&sdma 20 20 1>,
 					       <&sdma 21 20 1>, <&sdma 22 20 1>;
@@ -544,7 +547,7 @@
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 
-				regulator-1p1@110 {
+				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
 					regulator-min-microvolt = <800000>;
@@ -558,7 +561,7 @@
 					anatop-max-voltage = <1375000>;
 				};
 
-				regulator-3p0@120 {
+				regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2800000>;
@@ -572,7 +575,7 @@
 					anatop-max-voltage = <3400000>;
 				};
 
-				regulator-2p5@130 {
+				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
 					regulator-min-microvolt = <2100000>;
@@ -586,7 +589,7 @@
 					anatop-max-voltage = <2875000>;
 				};
 
-				reg_arm: regulator-vddcore@140 {
+				reg_arm: regulator-vddcore {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddarm";
 					regulator-min-microvolt = <725000>;
@@ -603,7 +606,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_pcie: regulator-vddpcie@140 {
+				reg_pcie: regulator-vddpcie {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddpcie";
 					regulator-min-microvolt = <725000>;
@@ -619,7 +622,7 @@
 					anatop-max-voltage = <1450000>;
 				};
 
-				reg_soc: regulator-vddsoc@140 {
+				reg_soc: regulator-vddsoc {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vddsoc";
 					regulator-min-microvolt = <725000>;
@@ -662,22 +665,31 @@
 			};
 
 			snvs: snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
 
-				snvs_rtc: snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs>;
+					offset = <0x34>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				snvs_poweroff: snvs-poweroff@38 {
-					compatible = "fsl,sec-v4.0-poweroff";
-					reg = <0x38 0x4>;
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
 					status = "disabled";
 				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
 			};
 
 			epit1: epit@020d0000 {
@@ -738,6 +750,33 @@
 			reg = <0x02100000 0x100000>;
 			ranges;
 
+			crypto: caam@2100000 {
+				compatible = "fsl,sec-v4.0";
+				fsl,sec-era = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2100000 0x10000>;
+				ranges = <0 0x2100000 0x10000>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SX_CLK_CAAM_MEM>,
+					 <&clks IMX6SX_CLK_CAAM_ACLK>,
+					 <&clks IMX6SX_CLK_CAAM_IPG>,
+					 <&clks IMX6SX_CLK_EIM_SLOW>;
+				clock-names = "mem", "aclk", "ipg", "emi_slow";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			usbotg1: usb@02184000 {
 				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
@@ -746,6 +785,9 @@
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -756,6 +798,9 @@
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -768,6 +813,9 @@
 				phy_type = "hsic";
 				fsl,anatop = <&anatop>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -924,8 +972,7 @@
 					 <&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
 				dma-names = "rx", "tx";
-				dmas = <&sdma 31 23 0>, <&sdma 32 23 0>;
-				dma-source = <&gpr 0 15 0 16>;
+				dmas = <&sdma 31 24 0>, <&sdma 32 24 0>;
 				status = "disabled";
 			};
 
@@ -944,8 +991,7 @@
 					 <&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
 				dma-names = "rx", "tx";
-				dmas = <&sdma 33 23 0>, <&sdma 34 23 0>;
-				dma-source = <&gpr 0 17 0 18>;
+				dmas = <&sdma 33 24 0>, <&sdma 34 24 0>;
 				status = "disabled";
 			};
 
@@ -1115,6 +1161,8 @@
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_IPG>;
 				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
 				status = "disabled";
                         };
 
@@ -1124,6 +1172,8 @@
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_IPG>;
 				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
 				status = "disabled";
                         };
 
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
new file mode 100644
index 000000000..e281d5087
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -0,0 +1,499 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
+	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_sd1_vmmc: sd1_regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "VSD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "mx6ul-wm8960";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Speaker", "SPK_LP",
+			"Speaker", "SPK_LN",
+			"Speaker", "SPK_RP",
+			"Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"RINPUT2", "Mic Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&cpu0 {
+	arm-supply = <&reg_arm>;
+	soc-supply = <&reg_soc>;
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		wlf,shared-lrclk;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			reg = <2>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: timing0 {
+				clock-frequency = <9200000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <8>;
+				hback-porch = <4>;
+				hsync-len = <41>;
+				vback-porch = <2>;
+				vfront-porch = <4>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+			/* used for lcd reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x17059
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_sim2: sim2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
+			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
+			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
+			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
+			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
+			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
new file mode 100644
index 000000000..86f68fade
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
@@ -0,0 +1,516 @@
+/*
+ * Copyright 2015 Technexion Ltd.
+ *
+ * Author: Wig Cheng  <wig.cheng@technexion.com>
+ *	   Richard Hu <richard.hu@technexion.com>
+ *	   Tapani Utriainen <tapani@technexion.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Technexion Pico i.MX6UL Board";
+	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 6 0>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		hobbitled {
+			label = "hobbitled";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+	phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW 0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			/* VDD_ARM_SOC_IN*/
+			sw1b_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* DRAM */
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DRAM */
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: timing0 {
+				clock-frequency = <33200000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <210>;
+				hback-porch = <46>;
+				hsync-len = <1>;
+				vback-porch = <22>;
+				vfront-porch = <23>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi SDIO */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET2_MDC	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x800
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x79
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_GPIO1_IO03__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__I2C3_SCL	0x4001b8b0
+			MX6UL_PAD_UART1_RX_DATA__I2C3_SDA	0x4001b8b0
+			>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			/* LCD reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b0
+			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b0
+			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
+			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b0
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b0
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b0
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x10b0
+			>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B	0x03029
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h
new file mode 100644
index 000000000..0034eeb84
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pinfunc.h
@@ -0,0 +1,938 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6UL_PINFUNC_H
+#define __DTS_IMX6UL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10		0x0014 0x02a0 0x0000 5 0
+#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11		0x0018 0x02a4 0x0000 5 0
+
+#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00		0x001c 0x02a8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01		0x0020 0x02ac 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02		0x0024 0x02b0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03		0x0028 0x02b4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04		0x002c 0x02b8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05		0x0030 0x02bc 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06		0x0034 0x02c0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07		0x0038 0x02c4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08		0x003c 0x02c8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09		0x0040 0x02cc 0x0000 5 0
+
+#define MX6UL_PAD_JTAG_MOD__SJC_MOD			0x0044 0x02d0 0x0000 0 0
+#define MX6UL_PAD_JTAG_MOD__GPT2_CLK			0x0044 0x02d0 0x05a0 1 0
+#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT			0x0044 0x02d0 0x0000 2 0
+#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M		0x0044 0x02d0 0x0000 3 0
+#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY		0x0044 0x02d0 0x04c0 4 0
+#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10			0x0044 0x02d0 0x0000 5 0
+#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00		0x0044 0x02d0 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__SJC_TMS			0x0048 0x02d4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1		0x0048 0x02d4 0x0598 1 0
+#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK			0x0048 0x02d4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1			0x0048 0x02d4 0x0000 3 0
+#define MX6UL_PAD_JTAG_TMS__CCM_WAIT			0x0048 0x02d4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11			0x0048 0x02d4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01		0x0048 0x02d4 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT			0x0048 0x02d4 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDO__SJC_TDO			0x004c 0x02d8 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2		0x004c 0x02d8 0x059c 1 0
+#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC		0x004c 0x02d8 0x05fc 2 0
+#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2			0x004c 0x02d8 0x0000 3 0
+#define MX6UL_PAD_JTAG_TDO__CCM_STOP			0x004c 0x02d8 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12			0x004c 0x02d8 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT			0x004c 0x02d8 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT			0x004c 0x02d8 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDI__SJC_TDI			0x0050 0x02dc 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1		0x0050 0x02dc 0x0000 1 0
+#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK		0x0050 0x02dc 0x05f8 2 0
+#define MX6UL_PAD_JTAG_TDI__PWM6_OUT			0x0050 0x02dc 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13			0x0050 0x02dc 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDI__MQS_LEFT			0x0050 0x02dc 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL		0x0050 0x02dc 0x0000 8 0
+#define MX6UL_PAD_JTAG_TCK__SJC_TCK			0x0054 0x02e0 0x0000 0 0
+#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2		0x0054 0x02e0 0x0000 1 0
+#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA		0x0054 0x02e0 0x05f4 2 0
+#define MX6UL_PAD_JTAG_TCK__PWM7_OUT			0x0054 0x02e0 0x0000 4 0
+#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14			0x0054 0x02e0 0x0000 5 0
+#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL		0x0054 0x02e0 0x0000 8 0
+#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB		0x0058 0x02e4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3		0x0058 0x02e4 0x0000 1 0
+#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA		0x0058 0x02e4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT			0x0058 0x02e4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15		0x0058 0x02e4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS		0x0058 0x02e4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL			0x005c 0x02e8 0x05ac 0 1
+#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1		0x005c 0x02e8 0x058c 1 0
+#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID		0x005c 0x02e8 0x04b8 2 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1		0x005c 0x02e8 0x0574 3 0
+#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT			0x005c 0x02e8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00		0x005c 0x02e8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN	0x005c 0x02e8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET		0x005c 0x02e8 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B		0x005c 0x02e8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA			0x0060 0x02ec 0x05b0 0 1
+#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1		0x0060 0x02ec 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC		0x0060 0x02ec 0x0664 2 0
+#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2		0x0060 0x02ec 0x057c 3 0
+#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT			0x0060 0x02ec 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x0060 0x02ec 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT	0x0060 0x02ec 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET		0x0060 0x02ec 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B		0x0060 0x02ec 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL			0x0064 0x02f0 0x05a4 0 0
+#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2		0x0064 0x02f0 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR		0x0064 0x02f0 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M		0x0064 0x02f0 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP			0x0064 0x02f0 0x066c 4 0
+#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x0064 0x02f0 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00		0x0064 0x02f0 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET		0x0064 0x02f0 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX		0x0064 0x02f0 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX		0x0064 0x02f0 0x0624 8 0
+#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA			0x0068 0x02f4 0x05a8 0 1
+#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3		0x0068 0x02f4 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC		0x0068 0x02f4 0x0660 2 0
+#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B		0x0068 0x02f4 0x0668 4 0
+#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x0068 0x02f4 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK		0x0068 0x02f4 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK		0x0068 0x02f4 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX		0x0068 0x02f4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX		0x0068 0x02f4 0x0624 8 1
+#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1		0x006c 0x02f8 0x0574 0 1
+#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT			0x006c 0x02f8 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR		0x006c 0x02f8 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B		0x006c 0x02f8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0x006c 0x02f8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN	0x006c 0x02f8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX		0x006c 0x02f8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX		0x006c 0x02f8 0x0644 8 2
+#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2		0x0070 0x02fc 0x057c 0 1
+#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT			0x0070 0x02fc 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID		0x0070 0x02fc 0x04bc 2 0
+#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD			0x0070 0x02fc 0x0530 3 0
+#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT		0x0070 0x02fc 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x0070 0x02fc 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT	0x0070 0x02fc 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX		0x0070 0x02fc 0x0644 8 3
+#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX		0x0070 0x02fc 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO		0x0074 0x0300 0x0578 0 0
+#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO		0x0074 0x0300 0x0580 1 0
+#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE		0x0074 0x0300 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK			0x0074 0x0300 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP			0x0074 0x0300 0x069c 4 0
+#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x0074 0x0300 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT			0x0074 0x0300 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B		0x0074 0x0300 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS		0x0074 0x0300 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS		0x0074 0x0300 0x0620 8 0
+#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC			0x0078 0x0304 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC			0x0078 0x0304 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE		0x0078 0x0304 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK		0x0078 0x0304 0x0528 3 0
+#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B		0x0078 0x0304 0x0674 4 1
+#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0x0078 0x0304 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO07__CCM_STOP			0x0078 0x0304 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS		0x0078 0x0304 0x0620 8 1
+#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS		0x0078 0x0304 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x007c 0x0308 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B		0x007c 0x0308 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT			0x007c 0x0308 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC			0x007c 0x0308 0x052c 3 1
+#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT		0x007c 0x0308 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08		0x007c 0x0308 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY		0x007c 0x0308 0x04c0 6 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS		0x007c 0x0308 0x0640 8 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS		0x007c 0x0308 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT			0x0080 0x030c 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY		0x0080 0x030c 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN			0x0080 0x030c 0x0618 2 0
+#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC			0x0080 0x030c 0x0524 3 1
+#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B		0x0080 0x030c 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x0080 0x030c 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B		0x0080 0x030c 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS		0x0080 0x030c 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS		0x0080 0x030c 0x0640 8 2
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x0084 0x0310 0x0000 0 0
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX		0x0084 0x0310 0x0624 0 2
+#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02		0x0084 0x0310 0x0000 1 0
+#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL		0x0084 0x0310 0x05b4 2 0
+#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02		0x0084 0x0310 0x04c4 3 1
+#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1		0x0084 0x0310 0x0000 4 0
+#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16		0x0084 0x0310 0x0000 5 0
+#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT		0x0084 0x0310 0x0000 8 0
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x0088 0x0314 0x0624 0 3
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX		0x0088 0x0314 0x0000 0 0
+#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03		0x0088 0x0314 0x0000 1 0
+#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA		0x0088 0x0314 0x05b8 2 0
+#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03		0x0088 0x0314 0x04c8 3 1
+#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK		0x0088 0x0314 0x0594 4 0
+#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17		0x0088 0x0314 0x0000 5 0
+#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN		0x0088 0x0314 0x0618 8 1
+#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS		0x008c 0x0318 0x0000 0 0
+#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS		0x008c 0x0318 0x0620 0 2
+#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK		0x008c 0x0318 0x0000 1 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP		0x008c 0x0318 0x066c 2 1
+#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04		0x008c 0x0318 0x04d8 3 0
+#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN	0x008c 0x0318 0x0000 4 0
+#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18		0x008c 0x0318 0x0000 5 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP		0x008c 0x0318 0x069c 8 1
+#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS		0x0090 0x031c 0x0620 0 3
+#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS		0x0090 0x031c 0x0000 0 0
+#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER		0x0090 0x031c 0x0000 1 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B		0x0090 0x031c 0x0668 2 1
+#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05		0x0090 0x031c 0x04cc 3 1
+#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT	0x0090 0x031c 0x0000 4 0
+#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x0090 0x031c 0x0000 5 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B		0x0090 0x031c 0x0674 8 2
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX		0x0094 0x0320 0x0000 0 0
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX		0x0094 0x0320 0x062c 0 0
+#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02		0x0094 0x0320 0x0000 1 0
+#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL		0x0094 0x0320 0x05bc 2 0
+#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06		0x0094 0x0320 0x04dc 3 0
+#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1		0x0094 0x0320 0x058c 4 1
+#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x0094 0x0320 0x0000 5 0
+#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0		0x0094 0x0320 0x0000 8 0
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX		0x0098 0x0324 0x062c 0 1
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX		0x0098 0x0324 0x0000 0 0
+#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03		0x0098 0x0324 0x0000 1 0
+#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA		0x0098 0x0324 0x05c0 2 0
+#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07		0x0098 0x0324 0x04e0 3 0
+#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2		0x0098 0x0324 0x0590 4 0
+#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21		0x0098 0x0324 0x0000 5 0
+#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE		0x0098 0x0324 0x0000 7 0
+#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x0098 0x0324 0x0554 8 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS		0x009c 0x0328 0x0000 0 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS		0x009c 0x0328 0x0628 0 0
+#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS		0x009c 0x0328 0x0000 1 0
+#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX		0x009c 0x0328 0x0000 2 0
+#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08		0x009c 0x0328 0x04e4 3 0
+#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2		0x009c 0x0328 0x0000 4 0
+#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22		0x009c 0x0328 0x0000 5 0
+#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B			0x009c 0x0328 0x0000 7 0
+#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x009c 0x0328 0x055c 8 0
+#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS		0x00a0 0x032c 0x0628 0 1
+#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS		0x00a0 0x032c 0x0000 0 0
+#define MX6UL_PAD_UART2_RTS_B__ENET1_COL		0x00a0 0x032c 0x0000 1 0
+#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX		0x00a0 0x032c 0x0588 2 0
+#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09		0x00a0 0x032c 0x04e8 3 0
+#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3		0x00a0 0x032c 0x0000 4 0
+#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23		0x00a0 0x032c 0x0000 5 0
+#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL			0x00a0 0x032c 0x0000 7 0
+#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO		0x00a0 0x032c 0x0558 8 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX		0x00a4 0x0330 0x0000 0 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX		0x00a4 0x0330 0x0634 0 0
+#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02		0x00a4 0x0330 0x0000 1 0
+#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD		0x00a4 0x0330 0x0000 2 0
+#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01		0x00a4 0x0330 0x0000 3 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS		0x00a4 0x0330 0x0000 4 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS		0x00a4 0x0330 0x0628 4 2
+#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24		0x00a4 0x0330 0x0000 5 0
+#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT		0x00a4 0x0330 0x0000 7 0
+#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID		0x00a4 0x0330 0x04b8 8 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX		0x00a8 0x0334 0x0634 0 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX		0x00a8 0x0334 0x0000 0 0
+#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03		0x00a8 0x0334 0x0000 1 0
+#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD		0x00a8 0x0334 0x0000 2 0
+#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00		0x00a8 0x0334 0x0000 3 0
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS		0x00a8 0x0334 0x0628 4 3
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS		0x00a8 0x0334 0x0000 4 0
+#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25		0x00a8 0x0334 0x0000 5 0
+#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT		0x00a8 0x0334 0x0000 8 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS		0x00ac 0x0338 0x0000 0 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS		0x00ac 0x0338 0x0630 0 0
+#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK		0x00ac 0x0338 0x0000 1 0
+#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX		0x00ac 0x0338 0x0000 2 0
+#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10		0x00ac 0x0338 0x0000 3 0
+#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN	0x00ac 0x0338 0x0000 4 0
+#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26		0x00ac 0x0338 0x0000 5 0
+#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT		0x00ac 0x0338 0x0000 8 0
+#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS		0x00b0 0x033c 0x0630 0 1
+#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS		0x00b0 0x033c 0x0000 0 0
+#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER		0x00b0 0x033c 0x0000 1 0
+#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX		0x00b0 0x033c 0x0584 2 0
+#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11		0x00b0 0x033c 0x0000 3 0
+#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT	0x00b0 0x033c 0x0000 4 0
+#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27		0x00b0 0x033c 0x0000 5 0
+#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B		0x00b0 0x033c 0x0000 8 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX		0x00b4 0x0340 0x0000 0 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX		0x00b4 0x0340 0x063c 0 0
+#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02		0x00b4 0x0340 0x0000 1 0
+#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x00b4 0x0340 0x05a4 2 1
+#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12		0x00b4 0x0340 0x0000 3 0
+#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02	0x00b4 0x0340 0x0000 4 0
+#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28		0x00b4 0x0340 0x0000 5 0
+#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK		0x00b4 0x0340 0x0544 8 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX		0x00b8 0x0344 0x063c 0 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX		0x00b8 0x0344 0x0000 0 0
+#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03		0x00b8 0x0344 0x0000 1 0
+#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x00b8 0x0344 0x05a8 2 2
+#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13		0x00b8 0x0344 0x0000 3 0
+#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01	0x00b8 0x0344 0x0000 4 0
+#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29		0x00b8 0x0344 0x0000 5 0
+#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0		0x00b8 0x0344 0x0000 8 0
+#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30		0x00bc 0x0348 0x0000 5 0
+#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI		0x00bc 0x0348 0x054c 8 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX		0x00bc 0x0348 0x0000 0 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX		0x00bc 0x0348 0x0644 0 4
+#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS		0x00bc 0x0348 0x0000 1 0
+#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x00bc 0x0348 0x05ac 2 2
+#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14		0x00bc 0x0348 0x0000 3 0
+#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00	0x00bc 0x0348 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00c0 0x034c 0x0644 0 5
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX		0x00c0 0x034c 0x0000 0 0
+#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL		0x00c0 0x034c 0x0000 1 0
+#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x00c0 0x034c 0x05b0 2 2
+#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15		0x00c0 0x034c 0x0000 3 0
+#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB	0x00c0 0x034c 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31		0x00c0 0x034c 0x0000 5 0
+#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO		0x00c0 0x034c 0x0548 8 1
+#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00		0x00c4 0x0350 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS		0x00c4 0x0350 0x0638 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS		0x00c4 0x0350 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT		0x00c4 0x0350 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16		0x00c4 0x0350 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX		0x00c4 0x0350 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00		0x00c4 0x0350 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00		0x00c4 0x0350 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL		0x00c4 0x0350 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x00c8 0x0354 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS		0x00c8 0x0354 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS		0x00c8 0x0354 0x0638 1 1
+#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT		0x00c8 0x0354 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17		0x00c8 0x0354 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX		0x00c8 0x0354 0x0584 4 1
+#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x00c8 0x0354 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00		0x00c8 0x0354 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL		0x00c8 0x0354 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x00cc 0x0358 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS		0x00cc 0x0358 0x0640 1 3
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS		0x00cc 0x0358 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18		0x00cc 0x0358 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX		0x00cc 0x0358 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x00cc 0x0358 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01		0x00cc 0x0358 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT		0x00cc 0x0358 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x00d0 0x035c 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS		0x00d0 0x035c 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS		0x00d0 0x035c 0x0640 1 4
+#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19		0x00d0 0x035c 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX		0x00d0 0x035c 0x0588 4 1
+#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x00d0 0x035c 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01		0x00d0 0x035c 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT	0x00d0 0x035c 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x00d4 0x0360 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS		0x00d4 0x0360 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS		0x00d4 0x0360 0x0648 1 2
+#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT		0x00d4 0x0360 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20		0x00d4 0x0360 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO		0x00d4 0x0360 0x0580 4 1
+#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x00d4 0x0360 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02		0x00d4 0x0360 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB	0x00d4 0x0360 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x00d8 0x0364 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS		0x00d8 0x0364 0x0648 1 3
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS		0x00d8 0x0364 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT			0x00d8 0x0364 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21		0x00d8 0x0364 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC		0x00d8 0x0364 0x0000 4 0
+#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05		0x00d8 0x0364 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02		0x00d8 0x0364 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB	0x00d8 0x0364 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK		0x00dc 0x0368 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS		0x00dc 0x0368 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS		0x00dc 0x0368 0x0650 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT		0x00dc 0x0368 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22		0x00dc 0x0368 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1		0x00dc 0x0368 0x0574 4 2
+#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x00dc 0x0368 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03		0x00dc 0x0368 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK		0x00dc 0x0368 0x0594 8 1
+#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER		0x00e0 0x036c 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS		0x00e0 0x036c 0x0650 1 1
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS		0x00e0 0x036c 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT			0x00e0 0x036c 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23		0x00e0 0x036c 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE			0x00e0 0x036c 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07		0x00e0 0x036c 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03		0x00e0 0x036c 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2		0x00e0 0x036c 0x0590 8 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00		0x00e4 0x0370 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX		0x00e4 0x0370 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX		0x00e4 0x0370 0x064c 1 1
+#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD	0x00e4 0x0370 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL		0x00e4 0x0370 0x05b4 3 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO		0x00e4 0x0370 0x0578 4 1
+#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x00e4 0x0370 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04		0x00e4 0x0370 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR		0x00e4 0x0370 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01		0x00e8 0x0374 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX		0x00e8 0x0374 0x064c 1 2
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX		0x00e8 0x0374 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK	0x00e8 0x0374 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA		0x00e8 0x0374 0x05b8 3 1
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC		0x00e8 0x0374 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x00e8 0x0374 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04		0x00e8 0x0374 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC		0x00e8 0x0374 0x0664 8 1
+#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN		0x00ec 0x0378 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX		0x00ec 0x0378 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX		0x00ec 0x0378 0x0654 1 0
+#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B		0x00ec 0x0378 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL			0x00ec 0x0378 0x05bc 3 1
+#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26		0x00ec 0x0378 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x00ec 0x0378 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05		0x00ec 0x0378 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M	0x00ec 0x0378 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00		0x00f0 0x037c 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX		0x00f0 0x037c 0x0654 1 1
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX		0x00f0 0x037c 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN	0x00f0 0x037c 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA		0x00f0 0x037c 0x05c0 3 1
+#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02		0x00f0 0x037c 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x00f0 0x037c 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05		0x00f0 0x037c 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01		0x00f4 0x0380 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX		0x00f4 0x0380 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX		0x00f4 0x0380 0x065c 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD	0x00f4 0x0380 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK		0x00f4 0x0380 0x0564 3 0
+#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03		0x00f4 0x0380 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x00f4 0x0380 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06		0x00f4 0x0380 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR		0x00f4 0x0380 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN		0x00f8 0x0384 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX		0x00f8 0x0384 0x065c 1 1
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX		0x00f8 0x0384 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK		0x00f8 0x0384 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI		0x00f8 0x0384 0x056c 3 0
+#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN		0x00f8 0x0384 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x00f8 0x0384 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06		0x00f8 0x0384 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC		0x00f8 0x0384 0x0660 8 1
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK		0x00fc 0x0388 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS		0x00fc 0x0388 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS		0x00fc 0x0388 0x0658 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B	0x00fc 0x0388 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO		0x00fc 0x0388 0x0568 3 0
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2		0x00fc 0x0388 0x057c 4 2
+#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x00fc 0x0388 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07		0x00fc 0x0388 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID		0x00fc 0x0388 0x04bc 8 1
+#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER		0x0100 0x038c 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS		0x0100 0x038c 0x0658 1 1
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS		0x0100 0x038c 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN		0x0100 0x038c 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0		0x0100 0x038c 0x0000 3 0
+#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25		0x0100 0x038c 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x0100 0x038c 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07		0x0100 0x038c 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY		0x0100 0x038c 0x0000 8 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x0104 0x0390 0x0000 0 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN			0x0104 0x0390 0x0000 1 0
+#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX			0x0104 0x0390 0x0000 2 0
+#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX			0x0104 0x0390 0x063c 2 2
+#define MX6UL_PAD_LCD_CLK__SAI3_MCLK			0x0104 0x0390 0x0000 3 0
+#define MX6UL_PAD_LCD_CLK__EIM_CS2_B			0x0104 0x0390 0x0000 4 0
+#define MX6UL_PAD_LCD_CLK__GPIO3_IO00			0x0104 0x0390 0x0000 5 0
+#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB		0x0104 0x0390 0x0000 8 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x0108 0x0394 0x0000 0 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E		0x0108 0x0394 0x0000 1 0
+#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX		0x0108 0x0394 0x063c 2 3
+#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX		0x0108 0x0394 0x0000 2 0
+#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC		0x0108 0x0394 0x060c 3 0
+#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B			0x0108 0x0394 0x0000 4 0
+#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01		0x0108 0x0394 0x0000 5 0
+#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY		0x0108 0x0394 0x0000 8 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x010c 0x0398 0x05dc 0 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS			0x010c 0x0398 0x0000 1 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS		0x010c 0x0398 0x0000 2 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS		0x010c 0x0398 0x0638 2 2
+#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK		0x010c 0x0398 0x0608 3 0
+#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB	0x010c 0x0398 0x0000 4 0
+#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02			0x010c 0x0398 0x0000 5 0
+#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1			0x010c 0x0398 0x0000 8 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x0110 0x039c 0x0000 0 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY			0x0110 0x039c 0x05dc 1 1
+#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS		0x0110 0x039c 0x0638 2 3
+#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS		0x0110 0x039c 0x0000 2 0
+#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA		0x0110 0x039c 0x0000 3 0
+#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B		0x0110 0x039c 0x0000 4 0
+#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03			0x0110 0x039c 0x0000 5 0
+#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2			0x0110 0x039c 0x0000 8 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_RESET		0x0114 0x03a0 0x0000 0 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_CS			0x0114 0x03a0 0x0000 1 0
+#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI		0x0114 0x03a0 0x0000 2 0
+#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA		0x0114 0x03a0 0x0000 3 0
+#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x0114 0x03a0 0x0000 4 0
+#define MX6UL_PAD_LCD_RESET__GPIO3_IO04			0x0114 0x03a0 0x0000 5 0
+#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3			0x0114 0x03a0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x0118 0x03a4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA00__PWM1_OUT			0x0118 0x03a4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN	0x0118 0x03a4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA00__I2C3_SDA			0x0118 0x03a4 0x05b8 4 2
+#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05		0x0118 0x03a4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00		0x0118 0x03a4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK			0x0118 0x03a4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x011c 0x03a8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA01__PWM2_OUT			0x011c 0x03a8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT	0x011c 0x03a8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA01__I2C3_SCL			0x011c 0x03a8 0x05b4 4 2
+#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06		0x011c 0x03a8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01		0x011c 0x03a8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC		0x011c 0x03a8 0x05ec 8 0
+#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x0120 0x03ac 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA02__PWM3_OUT			0x0120 0x03ac 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN	0x0120 0x03ac 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA02__I2C4_SDA			0x0120 0x03ac 0x05c0 4 2
+#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07		0x0120 0x03ac 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02		0x0120 0x03ac 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK		0x0120 0x03ac 0x05e8 8 0
+#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x0124 0x03b0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA03__PWM4_OUT			0x0124 0x03b0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT	0x0124 0x03b0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA03__I2C4_SCL			0x0124 0x03b0 0x05bc 4 2
+#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08		0x0124 0x03b0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03		0x0124 0x03b0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA		0x0124 0x03b0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x0128 0x03b4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS		0x0128 0x03b4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS		0x0128 0x03b4 0x0658 1 2
+#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN	0x0128 0x03b4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK		0x0128 0x03b4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09		0x0128 0x03b4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04		0x0128 0x03b4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA		0x0128 0x03b4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x012c 0x03b8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS		0x012c 0x03b8 0x0658 1 3
+#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS		0x012c 0x03b8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT	0x012c 0x03b8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT			0x012c 0x03b8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10		0x012c 0x03b8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05		0x012c 0x03b8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1		0x012c 0x03b8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x0130 0x03bc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS		0x0130 0x03bc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS		0x0130 0x03bc 0x0650 1 2
+#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN	0x0130 0x03bc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK		0x0130 0x03bc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11		0x0130 0x03bc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06		0x0130 0x03bc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2		0x0130 0x03bc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x0134 0x03c0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS		0x0134 0x03c0 0x0650 1 3
+#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS		0x0134 0x03c0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT	0x0134 0x03c0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK		0x0134 0x03c0 0x061c 4 0
+#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12		0x0134 0x03c0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07		0x0134 0x03c0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3		0x0134 0x03c0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x0138 0x03c4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA08__SPDIF_IN			0x0138 0x03c4 0x0618 1 2
+#define MX6UL_PAD_LCD_DATA08__CSI_DATA16		0x0138 0x03c4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA08__EIM_DATA00		0x0138 0x03c4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13		0x0138 0x03c4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08		0x0138 0x03c4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX		0x0138 0x03c4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x013c 0x03c8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK			0x013c 0x03c8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA09__CSI_DATA17		0x013c 0x03c8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA09__EIM_DATA01		0x013c 0x03c8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14		0x013c 0x03c8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09		0x013c 0x03c8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX		0x013c 0x03c8 0x0584 8 2
+#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x0140 0x03cc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC		0x0140 0x03cc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA10__CSI_DATA18		0x0140 0x03cc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA10__EIM_DATA02		0x0140 0x03cc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15		0x0140 0x03cc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10		0x0140 0x03cc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX		0x0140 0x03cc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x0144 0x03d0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK		0x0144 0x03d0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA11__CSI_DATA19		0x0144 0x03d0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA11__EIM_DATA03		0x0144 0x03d0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16		0x0144 0x03d0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11		0x0144 0x03d0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX		0x0144 0x03d0 0x0588 8 2
+#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x0148 0x03d4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC		0x0148 0x03d4 0x060c 1 1
+#define MX6UL_PAD_LCD_DATA12__CSI_DATA20		0x0148 0x03d4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA12__EIM_DATA04		0x0148 0x03d4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17		0x0148 0x03d4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12		0x0148 0x03d4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY		0x0148 0x03d4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x014c 0x03d8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK		0x014c 0x03d8 0x0608 1 1
+#define MX6UL_PAD_LCD_DATA13__CSI_DATA21		0x014c 0x03d8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA13__EIM_DATA05		0x014c 0x03d8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18		0x014c 0x03d8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13		0x014c 0x03d8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B		0x014c 0x03d8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x0150 0x03dc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA		0x0150 0x03dc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA14__CSI_DATA22		0x0150 0x03dc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA14__EIM_DATA06		0x0150 0x03dc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19		0x0150 0x03dc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14		0x0150 0x03dc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4		0x0150 0x03dc 0x068c 8 0
+#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x0154 0x03e0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA		0x0154 0x03e0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA15__CSI_DATA23		0x0154 0x03e0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA15__EIM_DATA07		0x0154 0x03e0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20		0x0154 0x03e0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15		0x0154 0x03e0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5		0x0154 0x03e0 0x0690 8 0
+#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x0158 0x03e4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX		0x0158 0x03e4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX		0x0158 0x03e4 0x0654 1 2
+#define MX6UL_PAD_LCD_DATA16__CSI_DATA01		0x0158 0x03e4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA16__EIM_DATA08		0x0158 0x03e4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21		0x0158 0x03e4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24		0x0158 0x03e4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6		0x0158 0x03e4 0x0694 8 0
+#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x015c 0x03e8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX		0x015c 0x03e8 0x0654 1 3
+#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX		0x015c 0x03e8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA17__CSI_DATA00		0x015c 0x03e8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA17__EIM_DATA09		0x015c 0x03e8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22		0x015c 0x03e8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25		0x015c 0x03e8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7		0x015c 0x03e8 0x0698 8 0
+#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18		0x0160 0x03ec 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA18__PWM5_OUT			0x0160 0x03ec 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO		0x0160 0x03ec 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA18__CSI_DATA10		0x0160 0x03ec 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA18__EIM_DATA10		0x0160 0x03ec 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23		0x0160 0x03ec 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26		0x0160 0x03ec 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD		0x0160 0x03ec 0x0678 8 1
+#define MX6UL_PAD_LCD_DATA19__EIM_DATA11		0x0164 0x03f0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24		0x0164 0x03f0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27		0x0164 0x03f0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK		0x0164 0x03f0 0x0670 8 1
+#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19		0x0164 0x03f0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA19__PWM6_OUT			0x0164 0x03f0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY		0x0164 0x03f0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA19__CSI_DATA11		0x0164 0x03f0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA20__EIM_DATA12		0x0168 0x03f4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25		0x0168 0x03f4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28		0x0168 0x03f4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0		0x0168 0x03f4 0x067c 8 1
+#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20		0x0168 0x03f4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX		0x0168 0x03f4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX		0x0168 0x03f4 0x065c 1 2
+#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK		0x0168 0x03f4 0x0534 2 0
+#define MX6UL_PAD_LCD_DATA20__CSI_DATA12		0x0168 0x03f4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21		0x016c 0x03f8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX		0x016c 0x03f8 0x065c 1 3
+#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX		0x016c 0x03f8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0		0x016c 0x03f8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA21__CSI_DATA13		0x016c 0x03f8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__EIM_DATA13		0x016c 0x03f8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26		0x016c 0x03f8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29		0x016c 0x03f8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1		0x016c 0x03f8 0x0680 8 1
+#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22		0x0170 0x03fc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT			0x0170 0x03fc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI		0x0170 0x03fc 0x053c 2 0
+#define MX6UL_PAD_LCD_DATA22__CSI_DATA14		0x0170 0x03fc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA22__EIM_DATA14		0x0170 0x03fc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27		0x0170 0x03fc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30		0x0170 0x03fc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2		0x0170 0x03fc 0x0684 8 0
+#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23		0x0174 0x0400 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA23__MQS_LEFT			0x0174 0x0400 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO		0x0174 0x0400 0x0538 2 0
+#define MX6UL_PAD_LCD_DATA23__CSI_DATA15		0x0174 0x0400 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA23__EIM_DATA15		0x0174 0x0400 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28		0x0174 0x0400 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31		0x0174 0x0400 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3		0x0174 0x0400 0x0688 8 1
+#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B		0x0178 0x0404 0x0000 0 0
+#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x0178 0x0404 0x0670 1 2
+#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK		0x0178 0x0404 0x0000 2 0
+#define MX6UL_PAD_NAND_RE_B__KPP_ROW00			0x0178 0x0404 0x0000 3 0
+#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00			0x0178 0x0404 0x0000 4 0
+#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00			0x0178 0x0404 0x0000 5 0
+#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2			0x0178 0x0404 0x0000 8 0
+#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B		0x017c 0x0408 0x0000 0 0
+#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x017c 0x0408 0x0678 1 2
+#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B		0x017c 0x0408 0x0000 2 0
+#define MX6UL_PAD_NAND_WE_B__KPP_COL00			0x017c 0x0408 0x0000 3 0
+#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01			0x017c 0x0408 0x0000 4 0
+#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01			0x017c 0x0408 0x0000 5 0
+#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3			0x017c 0x0408 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00		0x0180 0x040c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x0180 0x040c 0x067c 1 2
+#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B		0x0180 0x040c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA00__KPP_ROW01		0x0180 0x040c 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA00__EIM_AD08			0x0180 0x040c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02		0x0180 0x040c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY		0x0180 0x040c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01		0x0184 0x0410 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x0184 0x0410 0x0680 1 2
+#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS		0x0184 0x0410 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA01__KPP_COL01		0x0184 0x0410 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA01__EIM_AD09			0x0184 0x0410 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03		0x0184 0x0410 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1		0x0184 0x0410 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02		0x0188 0x0414 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x0188 0x0414 0x0684 1 1
+#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00		0x0188 0x0414 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA02__KPP_ROW02		0x0188 0x0414 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA02__EIM_AD10			0x0188 0x0414 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04		0x0188 0x0414 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2		0x0188 0x0414 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03		0x018c 0x0418 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x018c 0x0418 0x0688 1 2
+#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01		0x018c 0x0418 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA03__KPP_COL02		0x018c 0x0418 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA03__EIM_AD11			0x018c 0x0418 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05		0x018c 0x0418 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3		0x018c 0x0418 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04		0x0190 0x041c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x0190 0x041c 0x068c 1 1
+#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02		0x0190 0x041c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK		0x0190 0x041c 0x0564 3 1
+#define MX6UL_PAD_NAND_DATA04__EIM_AD12			0x0190 0x041c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06		0x0190 0x041c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX		0x0190 0x041c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX		0x0190 0x041c 0x062c 8 2
+#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05		0x0194 0x0420 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x0194 0x0420 0x0690 1 1
+#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03		0x0194 0x0420 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI		0x0194 0x0420 0x056c 3 1
+#define MX6UL_PAD_NAND_DATA05__EIM_AD13			0x0194 0x0420 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07		0x0194 0x0420 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX		0x0194 0x0420 0x062c 8 3
+#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX		0x0194 0x0420 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06		0x0198 0x0424 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x0198 0x0424 0x0694 1 1
+#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK		0x0198 0x0424 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO		0x0198 0x0424 0x0568 3 1
+#define MX6UL_PAD_NAND_DATA06__EIM_AD14			0x0198 0x0424 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08		0x0198 0x0424 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS		0x0198 0x0424 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS		0x0198 0x0424 0x0628 8 4
+#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07		0x019c 0x0428 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x019c 0x0428 0x0698 1 1
+#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B		0x019c 0x0428 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0		0x019c 0x0428 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA07__EIM_AD15			0x019c 0x0428 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09		0x019c 0x0428 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS		0x019c 0x0428 0x0628 8 5
+#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS		0x019c 0x0428 0x0000 8 0
+#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE			0x01a0 0x042c 0x0000 0 0
+#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B		0x01a0 0x042c 0x0000 1 0
+#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS			0x01a0 0x042c 0x0000 2 0
+#define MX6UL_PAD_NAND_ALE__PWM3_OUT			0x01a0 0x042c 0x0000 3 0
+#define MX6UL_PAD_NAND_ALE__EIM_ADDR17			0x01a0 0x042c 0x0000 4 0
+#define MX6UL_PAD_NAND_ALE__GPIO4_IO10			0x01a0 0x042c 0x0000 5 0
+#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1			0x01a0 0x042c 0x0000 8 0
+#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B		0x01a4 0x0430 0x0000 0 0
+#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B		0x01a4 0x0430 0x0000 1 0
+#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK		0x01a4 0x0430 0x0000 2 0
+#define MX6UL_PAD_NAND_WP_B__PWM4_OUT			0x01a4 0x0430 0x0000 3 0
+#define MX6UL_PAD_NAND_WP_B__EIM_BCLK			0x01a4 0x0430 0x0000 4 0
+#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11			0x01a4 0x0430 0x0000 5 0
+#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY			0x01a4 0x0430 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B		0x01a8 0x0434 0x0000 0 0
+#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4		0x01a8 0x0434 0x0000 1 0
+#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00		0x01a8 0x0434 0x0000 2 0
+#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0		0x01a8 0x0434 0x0000 3 0
+#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B		0x01a8 0x0434 0x0000 4 0
+#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12		0x01a8 0x0434 0x0000 5 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX		0x01a8 0x0434 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX		0x01a8 0x0434 0x0634 8 2
+#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B		0x01ac 0x0438 0x0000 0 0
+#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5		0x01ac 0x0438 0x0000 1 0
+#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01		0x01ac 0x0438 0x0000 2 0
+#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK		0x01ac 0x0438 0x0554 3 1
+#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B		0x01ac 0x0438 0x0000 4 0
+#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13		0x01ac 0x0438 0x0000 5 0
+#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX		0x01ac 0x0438 0x0634 8 3
+#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX		0x01ac 0x0438 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B		0x01b0 0x043c 0x0000 0 0
+#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6		0x01b0 0x043c 0x0000 1 0
+#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02		0x01b0 0x043c 0x0000 2 0
+#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI		0x01b0 0x043c 0x055c 3 1
+#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18		0x01b0 0x043c 0x0000 4 0
+#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14		0x01b0 0x043c 0x0000 5 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS		0x01b0 0x043c 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS		0x01b0 0x043c 0x0630 8 2
+#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE			0x01b4 0x0440 0x0000 0 0
+#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7		0x01b4 0x0440 0x0000 1 0
+#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03		0x01b4 0x0440 0x0000 2 0
+#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO			0x01b4 0x0440 0x0558 3 1
+#define MX6UL_PAD_NAND_CLE__EIM_ADDR16			0x01b4 0x0440 0x0000 4 0
+#define MX6UL_PAD_NAND_CLE__GPIO4_IO15			0x01b4 0x0440 0x0000 5 0
+#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS		0x01b4 0x0440 0x0630 8 3
+#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS		0x01b4 0x0440 0x0000 8 0
+#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS			0x01b8 0x0444 0x0000 0 0
+#define MX6UL_PAD_NAND_DQS__CSI_FIELD			0x01b8 0x0444 0x0530 1 1
+#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B		0x01b8 0x0444 0x0000 2 0
+#define MX6UL_PAD_NAND_DQS__PWM5_OUT			0x01b8 0x0444 0x0000 3 0
+#define MX6UL_PAD_NAND_DQS__EIM_WAIT			0x01b8 0x0444 0x0000 4 0
+#define MX6UL_PAD_NAND_DQS__GPIO4_IO16			0x01b8 0x0444 0x0000 5 0
+#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01		0x01b8 0x0444 0x0000 6 0
+#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK		0x01b8 0x0444 0x061c 8 1
+#define MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x01bc 0x0448 0x0000 0 0
+#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1		0x01bc 0x0448 0x0000 1 0
+#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC			0x01bc 0x0448 0x0000 2 0
+#define MX6UL_PAD_SD1_CMD__SPDIF_OUT			0x01bc 0x0448 0x0000 3 0
+#define MX6UL_PAD_SD1_CMD__EIM_ADDR19			0x01bc 0x0448 0x0000 4 0
+#define MX6UL_PAD_SD1_CMD__GPIO2_IO16			0x01bc 0x0448 0x0000 5 0
+#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00		0x01bc 0x0448 0x0000 6 0
+#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR			0x01bc 0x0448 0x0000 8 0
+#define MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x01c0 0x044c 0x0000 0 0
+#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2		0x01c0 0x044c 0x0000 1 0
+#define MX6UL_PAD_SD1_CLK__SAI2_MCLK			0x01c0 0x044c 0x0000 2 0
+#define MX6UL_PAD_SD1_CLK__SPDIF_IN			0x01c0 0x044c 0x0618 3 3
+#define MX6UL_PAD_SD1_CLK__EIM_ADDR20			0x01c0 0x044c 0x0000 4 0
+#define MX6UL_PAD_SD1_CLK__GPIO2_IO17			0x01c0 0x044c 0x0000 5 0
+#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC			0x01c0 0x044c 0x0664 8 2
+#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x01c4 0x0450 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3		0x01c4 0x0450 0x0000 1 0
+#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC		0x01c4 0x0450 0x05fc 2 1
+#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX		0x01c4 0x0450 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21			0x01c4 0x0450 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18			0x01c4 0x0450 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID		0x01c4 0x0450 0x04b8 8 2
+#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x01c8 0x0454 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA1__GPT2_CLK			0x01c8 0x0454 0x05a0 1 1
+#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK		0x01c8 0x0454 0x05f8 2 1
+#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX		0x01c8 0x0454 0x0584 3 3
+#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22			0x01c8 0x0454 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19			0x01c8 0x0454 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR		0x01c8 0x0454 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x01cc 0x0458 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1		0x01cc 0x0458 0x0598 1 1
+#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA		0x01cc 0x0458 0x05f4 2 1
+#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX		0x01cc 0x0458 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23			0x01cc 0x0458 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20			0x01cc 0x0458 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1			0x01cc 0x0458 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC		0x01cc 0x0458 0x0660 8 2
+#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x01d0 0x045c 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2		0x01d0 0x045c 0x059c 1 1
+#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA		0x01d0 0x045c 0x0000 2 0
+#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX		0x01d0 0x045c 0x0588 3 3
+#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24			0x01d0 0x045c 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21			0x01d0 0x045c 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2			0x01d0 0x045c 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID		0x01d0 0x045c 0x04bc 8 2
+#define MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x01d4 0x0460 0x0000 0 0
+#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B			0x01d4 0x0460 0x0674 1 0
+#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B		0x01d4 0x0460 0x0000 2 0
+#define MX6UL_PAD_CSI_MCLK__I2C1_SDA			0x01d4 0x0460 0x05a8 3 0
+#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B			0x01d4 0x0460 0x0000 4 0
+#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17			0x01d4 0x0460 0x0000 5 0
+#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL		0x01d4 0x0460 0x0000 6 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX		0x01d4 0x0460 0x0000 8 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX		0x01d4 0x0460 0x064c 8 0
+#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x01d8 0x0464 0x0528 0 1
+#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP			0x01d8 0x0464 0x069c 1 2
+#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B		0x01d8 0x0464 0x0000 2 0
+#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL			0x01d8 0x0464 0x05a4 3 2
+#define MX6UL_PAD_CSI_PIXCLK__EIM_OE			0x01d8 0x0464 0x0000 4 0
+#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18		0x01d8 0x0464 0x0000 5 0
+#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5		0x01d8 0x0464 0x0000 6 0
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX		0x01d8 0x0464 0x064c 8 3
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX		0x01d8 0x0464 0x0000 8 0
+#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x01dc 0x0468 0x052c 0 0
+#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK			0x01dc 0x0468 0x0670 1 0
+#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK		0x01dc 0x0468 0x0000 2 0
+#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA			0x01dc 0x0468 0x05b0 3 0
+#define MX6UL_PAD_CSI_VSYNC__EIM_RW			0x01dc 0x0468 0x0000 4 0
+#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19			0x01dc 0x0468 0x0000 5 0
+#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT			0x01dc 0x0468 0x0000 6 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS		0x01dc 0x0468 0x0648 8 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS		0x01dc 0x0468 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x01e0 0x046c 0x0524 0 0
+#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD			0x01e0 0x046c 0x0678 1 0
+#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD		0x01e0 0x046c 0x0000 2 0
+#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL			0x01e0 0x046c 0x05ac 3 0
+#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B			0x01e0 0x046c 0x0000 4 0
+#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20			0x01e0 0x046c 0x0000 5 0
+#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT			0x01e0 0x046c 0x0000 6 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS		0x01e0 0x046c 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS		0x01e0 0x046c 0x0648 8 1
+#define MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x01e4 0x0470 0x04c4 0 0
+#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0		0x01e4 0x0470 0x067c 1 0
+#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B		0x01e4 0x0470 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK		0x01e4 0x0470 0x0544 3 0
+#define MX6UL_PAD_CSI_DATA00__EIM_AD00			0x01e4 0x0470 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21		0x01e4 0x0470 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT		0x01e4 0x0470 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX		0x01e4 0x0470 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX		0x01e4 0x0470 0x0644 8 0
+#define MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x01e8 0x0474 0x04c8 0 0
+#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1		0x01e8 0x0474 0x0680 1 0
+#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN		0x01e8 0x0474 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0		0x01e8 0x0474 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA01__EIM_AD01			0x01e8 0x0474 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22		0x01e8 0x0474 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK			0x01e8 0x0474 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX		0x01e8 0x0474 0x0644 8 1
+#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX		0x01e8 0x0474 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x01ec 0x0478 0x04d8 0 1
+#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2		0x01ec 0x0478 0x0684 1 2
+#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD		0x01ec 0x0478 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI		0x01ec 0x0478 0x054c 3 1
+#define MX6UL_PAD_CSI_DATA02__EIM_AD02			0x01ec 0x0478 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x01ec 0x0478 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC		0x01ec 0x0478 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS		0x01ec 0x0478 0x0640 8 5
+#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS		0x01ec 0x0478 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x01f0 0x047c 0x04cc 0 0
+#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3		0x01f0 0x047c 0x0688 1 0
+#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0x01f0 0x047c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO		0x01f0 0x047c 0x0548 3 0
+#define MX6UL_PAD_CSI_DATA03__EIM_AD03			0x01f0 0x047c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24		0x01f0 0x047c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK		0x01f0 0x047c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS		0x01f0 0x047c 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS		0x01f0 0x047c 0x0640 8 0
+#define MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x01f4 0x0480 0x04dc 0 1
+#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4		0x01f4 0x0480 0x068c 1 2
+#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x01f4 0x0480 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK		0x01f4 0x0480 0x0534 3 1
+#define MX6UL_PAD_CSI_DATA04__EIM_AD04			0x01f4 0x0480 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25		0x01f4 0x0480 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC		0x01f4 0x0480 0x05ec 6 1
+#define MX6UL_PAD_CSI_DATA04__USDHC1_WP			0x01f4 0x0480 0x066c 8 2
+#define MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x01f8 0x0484 0x04e0 0 1
+#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5		0x01f8 0x0484 0x0690 1 2
+#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0x01f8 0x0484 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0		0x01f8 0x0484 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA05__EIM_AD05			0x01f8 0x0484 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26		0x01f8 0x0484 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK		0x01f8 0x0484 0x05e8 6 1
+#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B		0x01f8 0x0484 0x0668 8 2
+#define MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x01fc 0x0488 0x04e4 0 1
+#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6		0x01fc 0x0488 0x0694 1 2
+#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0x01fc 0x0488 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI		0x01fc 0x0488 0x053c 3 1
+#define MX6UL_PAD_CSI_DATA06__EIM_AD06			0x01fc 0x0488 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27		0x01fc 0x0488 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA		0x01fc 0x0488 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B		0x01fc 0x0488 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x0200 0x048c 0x04e8 0 1
+#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7		0x0200 0x048c 0x0698 1 2
+#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0x0200 0x048c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO		0x0200 0x048c 0x0538 3 1
+#define MX6UL_PAD_CSI_DATA07__EIM_AD07			0x0200 0x048c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28		0x0200 0x048c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA		0x0200 0x048c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT		0x0200 0x048c 0x0000 8 0
+
+#endif /* __DTS_IMX6UL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
new file mode 100644
index 000000000..8c2f3df79
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		/delete-property/ mmc1;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
new file mode 100644
index 000000000..d82698e7d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0011 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+	};
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
new file mode 100644
index 000000000..7c5dd1b31
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		lcdif_24bit_pins_a = &pinctrl_disp0_3;
+		mmc0 = &usdhc1;
+		/delete-property/ mmc1;
+		serial2 = &uart3;
+		serial4 = &uart5;
+	};
+	/delete-node/ sound;
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy0_int>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+
+		etnphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy1_int>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+	};
+};
+
+&i2c_gpio {
+	status = "disabled";
+};
+
+&i2c2 {
+	/delete-node/ codec@0a;
+	/delete-node/ touchscreen@48;
+
+	rtc: mcp7940x@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_disp0_3>;
+};
+
+&reg_usbotg_vbus{
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	/delete-property/ cd-gpios;
+	cap-sdio-irq;
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	/delete-property/ uart-has-rtscts;
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	/delete-property/ uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "disabled"; /* conflicts with LCDIF */
+};
+
+&iomuxc {
+	hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
+		>;
+	};
+
+	pinctrl_disp0_3: disp0grp-3 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			/* LCD_DATA08..09 not wired */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			/* LCD_DATA16..17 not wired */
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
new file mode 100644
index 000000000..530e9ca13
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -0,0 +1,973 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		can0 = &can2;
+		can1 = &can1;
+		display = &display;
+		i2c0 = &i2c2;
+		i2c1 = &i2c_gpio;
+		i2c2 = &i2c1;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		lcdif_23bit_pins_a = &pinctrl_disp0_1;
+		lcdif_24bit_pins_a = &pinctrl_disp0_2;
+		pwm0 = &pwm5;
+		reg_can_xcvr = &reg_can_xcvr;
+		serial2 = &uart5;
+		serial4 = &uart3;
+		spi0 = &ecspi2;
+		spi1 = &spi_gpio;
+		stk5led = &user_led;
+		usbh1 = &usbotg2;
+		usbotg = &usbotg1;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0 0>; /* will be filled by U-Boot */
+	};
+
+	clocks {
+		mclk: mclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_rst>;
+		enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	i2c_gpio: i2c-gpio {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio>;
+		gpios = <
+			&gpio5 1 GPIO_ACTIVE_HIGH /* SDA */
+			&gpio5 0 GPIO_ACTIVE_HIGH /* SCL */
+		>;
+		clock-frequency = <400000>;
+		status = "okay";
+
+		ds1339: rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+			status = "disabled";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user {
+			label = "Heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led>;
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3_etn: regulator-3v3etn {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_ETN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_etnphy_power>;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-canxcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-low;
+	};
+
+	reg_lcd_pwr: regulator-lcdpwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_pwr>;
+		gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	spi_gpio: spi-gpio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi_gpio>;
+		gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <2>;
+		cs-gpios = <
+			&gpio1 29 GPIO_ACTIVE_HIGH
+			&gpio1 10 GPIO_ACTIVE_HIGH
+		>;
+		status = "disabled";
+
+		spi@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <660000>;
+		};
+
+		spi@1 {
+			compatible = "spidev";
+			reg = <1>;
+			spi-max-frequency = <660000>;
+		};
+	};
+
+	sound {
+		compatible = "karo,imx6ul-tx6ul-sgtl5000",
+			     "simple-audio-card";
+		simple-audio-card,name = "imx6ul-tx6ul-sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <
+		&gpio1 29 GPIO_ACTIVE_HIGH
+		&gpio1 10 GPIO_ACTIVE_HIGH
+	>;
+	status = "disabled";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <60000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <60000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy0_int>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+
+		etnphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy1_int>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy1>;
+	status = "disabled";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	fsl,no-blockmark-swap;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: polytouch@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: touchscreen@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_NONE>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		wakeup-source;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0..3 are mapped to KPP row/col 4..7 */
+	linux,keymap = <
+		MATRIX_KEY(4, 4, KEY_POWER)
+		MATRIX_KEY(4, 5, KEY_KP0)
+		MATRIX_KEY(4, 6, KEY_KP1)
+		MATRIX_KEY(4, 7, KEY_KP2)
+		MATRIX_KEY(5, 4, KEY_KP3)
+		MATRIX_KEY(5, 5, KEY_KP4)
+		MATRIX_KEY(5, 6, KEY_KP5)
+		MATRIX_KEY(5, 7, KEY_KP6)
+		MATRIX_KEY(6, 4, KEY_KP7)
+		MATRIX_KEY(6, 5, KEY_KP8)
+		MATRIX_KEY(6, 6, KEY_KP9)
+	>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_disp0_1>;
+	lcd-supply = <&reg_lcd_pwr>;
+	display = <&display>;
+	status = "okay";
+
+	display: display@di0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		status = "okay";
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usbotg_vbus>;
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x0b0b0 /* LED */
+		>;
+	};
+
+	pinctrl_disp0_1: disp0grp-1 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			/* PAD DISP0_DAT0 is used for the Flexcan transceiver control on STK5-v5 */
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x10
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x10
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x10
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x10
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x10
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_disp0_2: disp0grp-2 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x10
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x10
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x10
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x10
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x10
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x10
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI	0x0b0b0 /* CSPI_MOSI */
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO	0x0b0b0 /* CSPI_MISO */
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK	0x0b0b0 /* CSPI_SCLK */
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edt-ft5x06grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0 /* Interrupt */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0 /* Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Wake */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x000b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x000b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x000b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x000b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x000b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x000b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x000b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x400000b1
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x000b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x000b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x000b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x000b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x000b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x000b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x000b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x400000b1
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x0b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_etnphy_power: etnphy-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0 /* ETN PHY POWER */
+		>;
+	};
+
+	pinctrl_etnphy0_int: etnphy-intgrp-0 {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0 /* ETN PHY INT */
+		>;
+	};
+
+	pinctrl_etnphy0_rst: etnphy-rstgrp-0 {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0 /* ETN PHY RESET */
+		>;
+	};
+
+	pinctrl_etnphy1_int: etnphy-intgrp-1 {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x0b0b0 /* ETN PHY INT */
+		>;
+	};
+
+	pinctrl_etnphy1_rst: etnphy-rstgrp-1 {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x0b0b0 /* ETN PHY RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0x0b0b0 /* Flexcan XCVR enable */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c_gpio: i2c-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x4001b8b1 /* I2C SCL */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x4001b8b1 /* I2C SDA */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b1
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__KPP_COL06	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__KPP_COL07	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__KPP_ROW05	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07	0x1b0b0
+		>;
+	};
+
+	pinctrl_lcd_pwr: lcd-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0 /* LCD Power Enable */
+		>;
+	};
+
+	pinctrl_lcd_rst: lcd-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04	0x0b0b0 /* LCD Reset */
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT		0x0b0b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x0b0b0 /* SSI1_RXD */
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x0b0b0 /* SSI1_TXD */
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x0b0b0 /* SSI1_CLK */
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x0b0b0 /* SSI1_FS */
+		>;
+	};
+
+	pinctrl_spi_gpio: spi-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x0b0b0 /* CSPI_MOSI */
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x0b0b0 /* CSPI_MISO */
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x0b0b0 /* CSPI_SCLK */
+		>;
+	};
+
+	pinctrl_tsc2007: tsc2007grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x1b0b0 /* Interrupt */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart1_rtscts: uart1-rtsctsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS	0x0b0b0
+			MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart2_rtscts: uart2-rtsctsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x0b0b0
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x0b0b0
+			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart5_rtscts: uart5-rtsctsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x0b0b0
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x0b0b0
+		>;
+	};
+
+	pinctrl_usbh1_oc: usbh1-ocgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x17059 /* USBH1_OC */
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x0b0b0 /* USBH1_VBUSEN */
+		>;
+	};
+
+	pinctrl_usbotg_oc: usbotg-ocgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x17059 /* USBOTG_OC */
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x1b0b0 /* USBOTG_VBUSEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x070b1
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x07099
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x070b1
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x070b1
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x070b1
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x070b1
+		>;
+	};
+
+	pinctrl_usdhc1_cd: usdhc1cdgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x170b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x070b1
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x070b1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x070b1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x070b1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x070b1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x070b1
+			/* eMMC RESET */
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x170b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
new file mode 100644
index 000000000..061e594e7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -0,0 +1,935 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		sai1 = &sai1;
+		sai2 = &sai2;
+		sai3 = &sai3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			operating-points = <
+				/* kHz	uV */
+				528000	1175000
+				396000	1025000
+				198000	950000
+			>;
+			fsl,soc-operating-points = <
+				/* KHz	uV */
+				528000	1175000
+				396000	1175000
+				198000	1175000
+			>;
+			clocks = <&clks IMX6UL_CLK_ARM>,
+				 <&clks IMX6UL_CLK_PLL2_BUS>,
+				 <&clks IMX6UL_CLK_PLL2_PFD2>,
+				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
+				 <&clks IMX6UL_CLK_STEP>,
+				 <&clks IMX6UL_CLK_PLL1_SW>,
+				 <&clks IMX6UL_CLK_PLL1_SYS>,
+				 <&clks IMX6UL_PLL1_BYPASS>,
+				 <&clks IMX6UL_CLK_PLL1>,
+				 <&clks IMX6UL_PLL1_BYPASS_SRC>,
+				 <&clks IMX6UL_CLK_OSC>;
+			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
+				      "secondary_sel", "step", "pll1_sw",
+				      "pll1_sys", "pll1_bypass", "pll1",
+				      "pll1_bypass_src", "osc";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a02000 0x1000>,
+		      <0x00a04000 0x2000>,
+		      <0x00a06000 0x2000>;
+	};
+
+	ckil: clock-cli {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+		};
+
+		dma_apbh: dma-apbh@01804000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6UL_CLK_APBHDMA>;
+		};
+
+		gpmi: gpmi-nand@01806000         {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
+				 <&clks IMX6UL_CLK_GPMI_APB>,
+				 <&clks IMX6UL_CLK_GPMI_BCH>,
+				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6UL_CLK_PER_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				ecspi1: ecspi@02008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI1>,
+						 <&clks IMX6UL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI2>,
+						 <&clks IMX6UL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI3>,
+						 <&clks IMX6UL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI4>,
+						 <&clks IMX6UL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart7: serial@02018000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
+						 <&clks IMX6UL_CLK_UART7_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
+						 <&clks IMX6UL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart8: serial@02024000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+						 <&clks IMX6UL_CLK_UART8_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				sai1: sai@02028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
+						 <&clks IMX6UL_CLK_SAI1>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 35 24 0>,
+					       <&sdma 36 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@0202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
+						 <&clks IMX6UL_CLK_SAI2>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 37 24 0>,
+					       <&sdma 38 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@02030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
+						 <&clks IMX6UL_CLK_SAI3>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 39 24 0>,
+					       <&sdma 40 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			tsc: tsc@02040000 {
+				compatible = "fsl,imx6ul-tsc";
+				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_ADC2>;
+				clock-names = "tsc", "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@02080000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM1>,
+					 <&clks IMX6UL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@02084000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM2>,
+					 <&clks IMX6UL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@02088000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM3>,
+					 <&clks IMX6UL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@0208c000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM4>,
+					 <&clks IMX6UL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			can1: flexcan@02090000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
+					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: flexcan@02094000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
+					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt1: gpt@02098000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
+					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			fec2: ethernet@020b4000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG1>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6ul-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6ul-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@020e4000 {
+				compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			gpt2: gpt@020e8000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
+					 <&clks IMX6UL_CLK_GPT2_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
+					     "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_SDMA>,
+					 <&clks IMX6UL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "/*(DEBLOBBED)*/";
+			};
+
+			pwm5: pwm@020f0000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM5>,
+					 <&clks IMX6UL_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm6: pwm@020f4000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM6>,
+					 <&clks IMX6UL_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm7: pwm@020f8000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM7>,
+					 <&clks IMX6UL_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm8: pwm@020fc000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM8>,
+					 <&clks IMX6UL_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			fec1: ethernet@02188000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET_REF>,
+					 <&clks IMX6UL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			adc1: adc@02198000 {
+				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ADC1>;
+				num-channels = <2>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			lcdif: lcdif@021c8000 {
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				reg = <0x021c8000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
+					 <&clks IMX6UL_CLK_LCDIF_APB>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			qspi: qspi@021e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_QSPI>,
+					 <&clks IMX6UL_CLK_QSPI>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			uart2: serial@021e8000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
+					 <&clks IMX6UL_CLK_UART2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@021ec000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
+					 <&clks IMX6UL_CLK_UART3_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@021f0000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
+					 <&clks IMX6UL_CLK_UART4_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
+					 <&clks IMX6UL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c4: i2c@021f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C4>;
+				status = "disabled";
+			};
+
+			uart6: serial@021fc000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021fc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
+					 <&clks IMX6UL_CLK_UART6_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
new file mode 100644
index 000000000..1545661df
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&adc2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	display = <&display0>;
+	status = "okay";
+
+	display0: lcd-display {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing_vga>;
+
+			/* Standard VGA timing */
+			timing_vga: 640x480 {
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <24>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				de-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	no-1-8-v;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
new file mode 100644
index 000000000..0a9d3a822
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -0,0 +1,571 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+};
+
+&cpu0 {
+	arm-supply = <&reg_DCDC2>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+		<&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_LDO1>;
+	fsl,magic-packet;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
+	status = "okay";
+
+	ad7879@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	pmic@33 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x33>;
+
+		regulators {
+			reg_DCDC1: DCDC1 {  /* V1.0_SOC */
+				regulator-min-microvolt =  <975000>;
+				regulator-max-microvolt = <1125000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC2: DCDC2 { /* V1.1_ARM */
+				regulator-min-microvolt =  <975000>;
+				regulator-max-microvolt = <1125000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC3: DCDC3 { /* V1.8 */
+				regulator-min-microvolt = <1775000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC4: DCDC4 { /* V1.35_DRAM */
+				regulator-min-microvolt = <1325000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_LDO2: LDO2 { /* +V1.8_SD */
+				regulator-min-microvolt = <1775000>;
+				regulator-max-microvolt = <3325000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
+				regulator-min-microvolt = <3275000>;
+				regulator-max-microvolt = <3325000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO4: LDO4 { /* V1.8_LPSR */
+				regulator-min-microvolt = <1775000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
+				regulator-min-microvolt = <1775000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_1p0d {
+	vin-supply = <&reg_DCDC3>;
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	fsl,dte-mode;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+
+	pinctrl_gpio1: gpio1-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0X14 /* SODIMM 77 */
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x14 /* SODIMM 91 */
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x14 /* SODIMM 105 */
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x14 /* SODIMM 107 */
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
+			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
+			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
+			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 */
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
+			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x14 /* SODIMM 69 */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
+			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
+			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
+			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x14 /* SODIMM 146 */
+			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x14 /* SODIMM 148 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
+		>;
+	};
+
+	pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14			0x14
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
+
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3-cs-grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3-grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
+			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
+			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
+			MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B	0x71
+			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
+			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
+			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
+			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
+			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
+			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
+			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
+			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
+			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
+			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
+		>;
+	};
+
+	pinctrl_i2c4: i2c4-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f
+			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdif-dat-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79
+		>;
+	};
+
+	pinctrl_pwm2: pwm2-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79
+		>;
+	};
+
+	pinctrl_pwm3: pwm3-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79
+		>;
+	};
+
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79
+			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79
+			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* DCD */
+			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* DTR */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
+			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
+			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
+			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
+		>;
+	};
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
+		>;
+	};
+
+	pinctrl_usbotg2_reg: gpio-usbotg2-vbus {
+		fsl,pins = <
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+		>;
+	};
+
+	pinctrl_sai1: sai1-grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_lpsr>;
+
+	pinctrl_gpio_lpsr: gpio1-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO01__GPIO1_IO1	0x59
+			MX7D_PAD_GPIO1_IO02__GPIO1_IO2	0x59
+			MX7D_PAD_GPIO1_IO03__GPIO1_IO3	0x59
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO05__I2C1_SDA	0x4000007f
+			MX7D_PAD_GPIO1_IO04__I2C1_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_cd_usdhc1: usdhc1-cd-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO00__GPIO1_IO0	0x59 /* CD */
+		>;
+	};
+
+	pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO07__GPIO1_IO7	0x14 /* DSR */
+			MX7D_PAD_GPIO1_IO06__GPIO1_IO6	0x14 /* RI */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
new file mode 100644
index 000000000..58b09bf1b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -0,0 +1,285 @@
+/*
+ * Support for CompuLab CL-SOM-iMX7 System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-iMX7";
+	compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
+	memory {
+		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
+	};
+
+	reg_usb_otg1_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO05__GPIO1_IO5		0x14 /* OTG PWREN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
new file mode 100644
index 000000000..bd01d2cc6
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg2_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
new file mode 100644
index 000000000..3c2cb502b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
new file mode 100644
index 000000000..ce08f180f
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -0,0 +1,744 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX7 Nitrogen7 Board";
+	compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
+
+	aliases {
+		fb_lcd = &lcdif;
+		t_lcd = &t_lcd;
+	};
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight-j9 {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_j9>;
+		gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	backlight-j20 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "slow";
+		regulator-name = "reg_wlan";
+		startup-delay-us = <70000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touch@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
+		interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	lcd-supply = <&reg_vref_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: lcd-display {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&t_lcd>;
+			t_lcd: t_lcd_default {
+				/* default to Okaya display */
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <40>;
+				hsync-len = <48>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vgen3_reg>;
+	bus-width = <4>;
+	fsl,tuning-step = <2>;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
+
+	pinctrl_hog_1: hoggrp-1 {
+		fsl,pins = <
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11	0x5d
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x7d
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x7d
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x71
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x11
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x11
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x11
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x71
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x11
+			MX7D_PAD_SD3_STROBE__GPIO6_IO10			0x75
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x7d
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x7d
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x7d
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2_rv4162: i2c2-rv4162grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x7d
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x79
+			MX7D_PAD_SD2_WP__GPIO5_IO10		0x7d
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_j2: j2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x7d
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x7d
+			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x7d
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x7d
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7d
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x7d
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x7d
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x7d
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x7d
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x7d
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x7d
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x7d
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x7d
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x7d
+			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x7d
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x7d
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x7d
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x7d
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x7d
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x7d
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x7d
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x7d
+			MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22	0x7d
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x7d
+			MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20	0x7d
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x7d
+			MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19	0x7d
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x7d
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x7d
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x7d
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x7d
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x7d
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x7d
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x7d
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x7d
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x7d
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x7d
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
+			MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
+			MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
+			MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x7d
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x75
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x75
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x59
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_2>;
+
+	pinctrl_hog_2: hoggrp-2 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO02__GPIO1_IO2		0x7d
+			MX7D_PAD_GPIO1_IO03__CCM_CLKO2		0x7d
+		>;
+	};
+
+	pinctrl_backlight_j9: backlightj9grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO07__GPIO1_IO7		0x7d
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO01__PWM1_OUT		0x7d
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO04__USB_OTG1_OC	0x7d
+			MX7D_PAD_GPIO1_IO05__GPIO1_IO5		0x14
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B	0x75
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h
index a8d81497e..3f9f0d9c8 100644
--- a/arch/arm/boot/dts/imx7d-pinfunc.h
+++ b/arch/arm/boot/dts/imx7d-pinfunc.h
@@ -15,6 +15,122 @@
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
 
+#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0                            0x0000 0x0030 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO00__PWM4_OUT                             0x0000 0x0030 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY                       0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B                         0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB                0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1                            0x0004 0x0034 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO01__PWM1_OUT                             0x0004 0x0034 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3                    0x0004 0x0034 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK                            0x0004 0x0034 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT                       0x0004 0x0034 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT                         0x0004 0x0034 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2                            0x0008 0x0038 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO02__PWM2_OUT                             0x0008 0x0038 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1                    0x0008 0x0038 0x0564 0x2 0x3
+#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK                            0x0008 0x0038 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1                            0x0008 0x0038 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT                         0x0008 0x0038 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID                          0x0008 0x0038 0x0734 0x7 0x3
+#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3                            0x000C 0x003C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO03__PWM3_OUT                             0x000C 0x003C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2                    0x000C 0x003C 0x0570 0x2 0x3
+#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK                            0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2                            0x000C 0x003C 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT                         0x000C 0x003C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID                          0x000C 0x003C 0x0730 0x7 0x3
+#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4                            0x0010 0x0040 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC                          0x0010 0x0040 0x072C 0x1 0x1
+#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4                       0x0010 0x0040 0x0594 0x2 0x1
+#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B                          0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_GPIO1_IO04__I2C1_SCL                             0x0010 0x0040 0x05D4 0x4 0x2
+#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT                         0x0010 0x0040 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5                            0x0014 0x0044 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR                         0x0014 0x0044 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5                       0x0014 0x0044 0x0598 0x2 0x1
+#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B                          0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_GPIO1_IO05__I2C1_SDA                             0x0014 0x0044 0x05D8 0x4 0x2
+#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT                         0x0014 0x0044 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6                            0x0018 0x0048 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC                          0x0018 0x0048 0x0728 0x1 0x1
+#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6                       0x0018 0x0048 0x059C 0x2 0x1
+#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA                        0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_GPIO1_IO06__I2C2_SCL                             0x0018 0x0048 0x05DC 0x4 0x2
+#define MX7D_PAD_GPIO1_IO06__CCM_WAIT                             0x0018 0x0048 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO06__KPP_ROW4                             0x0018 0x0048 0x0624 0x6 0x1
+#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7                            0x001C 0x004C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR                         0x001C 0x004C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7                       0x001C 0x004C 0x05A0 0x2 0x1
+#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA                        0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_GPIO1_IO07__I2C2_SDA                             0x001C 0x004C 0x05E0 0x4 0x2
+#define MX7D_PAD_GPIO1_IO07__CCM_STOP                             0x001C 0x004C 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO07__KPP_COL4                             0x001C 0x004C 0x0604 0x6 0x1
+#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8                            0x0014 0x026C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT                          0x0014 0x026C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B                         0x0014 0x026C 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX                         0x0014 0x026C 0x0704 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX                         0x0014 0x026C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__I2C3_SCL                             0x0014 0x026C 0x05E4 0x4 0x0
+#define MX7D_PAD_GPIO1_IO08__KPP_COL5                             0x0014 0x026C 0x0608 0x6 0x0
+#define MX7D_PAD_GPIO1_IO08__PWM1_OUT                             0x0014 0x026C 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9                            0x0018 0x0270 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO09__SD1_LCTL                             0x0018 0x0270 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3                    0x0018 0x0270 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX                         0x0018 0x0270 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX                         0x0018 0x0270 0x0704 0x3 0x1
+#define MX7D_PAD_GPIO1_IO09__I2C3_SDA                             0x0018 0x0270 0x05E8 0x4 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY                       0x0018 0x0270 0x04F4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO09__KPP_ROW5                             0x0018 0x0270 0x0628 0x6 0x0
+#define MX7D_PAD_GPIO1_IO09__PWM2_OUT                             0x0018 0x0270 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10                           0x001C 0x0274 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO10__SD2_LCTL                             0x001C 0x0274 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO                           0x001C 0x0274 0x0568 0x2 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS                        0x001C 0x0274 0x0700 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS                        0x001C 0x0274 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__I2C4_SCL                             0x001C 0x0274 0x05EC 0x4 0x0
+#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA                       0x001C 0x0274 0x05A4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO10__KPP_COL6                             0x001C 0x0274 0x060C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO10__PWM3_OUT                             0x001C 0x0274 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11                           0x0020 0x0278 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO11__SD3_LCTL                             0x0020 0x0278 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO11__ENET1_MDC                            0x0020 0x0278 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS                        0x0020 0x0278 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS                        0x0020 0x0278 0x0700 0x3 0x1
+#define MX7D_PAD_GPIO1_IO11__I2C4_SDA                             0x0020 0x0278 0x05F0 0x4 0x0
+#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB                       0x0020 0x0278 0x05A8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO11__KPP_ROW6                             0x0020 0x0278 0x062C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO11__PWM4_OUT                             0x0020 0x0278 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12                           0x0024 0x027C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT                          0x0024 0x027C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1                    0x0024 0x027C 0x0564 0x2 0x0
+#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX                          0x0024 0x027C 0x04DC 0x3 0x0
+#define MX7D_PAD_GPIO1_IO12__CM4_NMI                              0x0024 0x027C 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1                         0x0024 0x027C 0x04E4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5                           0x0024 0x027C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID                          0x0024 0x027C 0x0734 0x7 0x0
+#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13                           0x0028 0x0280 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT                          0x0028 0x0280 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2                    0x0028 0x0280 0x0570 0x2 0x0
+#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX                          0x0028 0x0280 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY                       0x0028 0x0280 0x04F4 0x4 0x1
+#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2                         0x0028 0x0280 0x04E8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL                       0x0028 0x0280 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID                          0x0028 0x0280 0x0730 0x7 0x0
+#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14                           0x002C 0x0284 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO14__SD3_CD_B                             0x002C 0x0284 0x0738 0x1 0x0
+#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO                           0x002C 0x0284 0x0574 0x2 0x0
+#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX                          0x002C 0x0284 0x04E0 0x3 0x0
+#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B                         0x002C 0x0284 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3                         0x002C 0x0284 0x04EC 0x5 0x0
+#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0                      0x002C 0x0284 0x06D8 0x6 0x0
+#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15                           0x0030 0x0288 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO15__SD3_WP                               0x0030 0x0288 0x073C 0x1 0x0
+#define MX7D_PAD_GPIO1_IO15__ENET2_MDC                            0x0030 0x0288 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX                          0x0030 0x0288 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B                         0x0030 0x0288 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4                         0x0030 0x0288 0x04F0 0x5 0x0
+#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1                      0x0030 0x0288 0x06DC 0x6 0x0
 #define MX7D_PAD_EPDC_DATA00__EPDC_DATA0                          0x0034 0x02A4 0x0000 0x0 0x0
 #define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD                     0x0034 0x02A4 0x0000 0x1 0x0
 #define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0                        0x0034 0x02A4 0x0000 0x2 0x0
@@ -453,7 +569,7 @@
 #define MX7D_PAD_LCD_DATA23__EIM_ADDR26                           0x0124 0x0394 0x0000 0x4 0x0
 #define MX7D_PAD_LCD_DATA23__GPIO3_IO28                           0x0124 0x0394 0x0000 0x5 0x0
 #define MX7D_PAD_LCD_DATA23__I2C4_SDA                             0x0124 0x0394 0x05F0 0x6 0x1
-#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                      0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                      0x0128 0x0398 0x06F4 0x0 0x0
 #define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX                      0x0128 0x0398 0x0000 0x0 0x0
 #define MX7D_PAD_UART1_RX_DATA__I2C1_SCL                          0x0128 0x0398 0x05D4 0x1 0x0
 #define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY                    0x0128 0x0398 0x0000 0x2 0x0
@@ -469,7 +585,7 @@
 #define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT             0x012C 0x039C 0x0000 0x4 0x0
 #define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1                         0x012C 0x039C 0x0000 0x5 0x0
 #define MX7D_PAD_UART1_TX_DATA__ENET1_MDC                         0x012C 0x039C 0x0000 0x6 0x0
-#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                      0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                      0x0130 0x03A0 0x06FC 0x0 0x2
 #define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX                      0x0130 0x03A0 0x0000 0x0 0x0
 #define MX7D_PAD_UART2_RX_DATA__I2C2_SCL                          0x0130 0x03A0 0x05DC 0x1 0x0
 #define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK                      0x0130 0x03A0 0x0000 0x2 0x0
@@ -478,7 +594,7 @@
 #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2                         0x0130 0x03A0 0x0000 0x5 0x0
 #define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                        0x0130 0x03A0 0x0000 0x6 0x0
 #define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                      0x0134 0x03A4 0x0000 0x0 0x0
-#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x06FC 0x0 0x3
 #define MX7D_PAD_UART2_TX_DATA__I2C2_SDA                          0x0134 0x03A4 0x05E0 0x1 0x0
 #define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0                     0x0134 0x03A4 0x06C8 0x2 0x0
 #define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY                        0x0134 0x03A4 0x0000 0x3 0x0
@@ -501,7 +617,7 @@
 #define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT             0x013C 0x03AC 0x0000 0x4 0x0
 #define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5                         0x013C 0x03AC 0x0000 0x5 0x0
 #define MX7D_PAD_UART3_TX_DATA__SD2_LCTL                          0x013C 0x03AC 0x0000 0x6 0x0
-#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                       0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                       0x0140 0x03B0 0x0700 0x0 0x2
 #define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS                       0x0140 0x03B0 0x0000 0x0 0x0
 #define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC                         0x0140 0x03B0 0x0728 0x1 0x0
 #define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0                       0x0140 0x03B0 0x0000 0x2 0x0
diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
new file mode 100644
index 000000000..f8a868552
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
@@ -0,0 +1,42 @@
+/*
+ * Support for CompuLab SBC-iMX7 Single Board Computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+#include "imx7d-cl-som-imx7.dts"
+
+/ {
+	model = "CompuLab SBC-iMX7";
+	compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index fdd1d7c9a..2f33c463c 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -42,7 +42,6 @@
 
 /dts-v1/;
 
-#include <dt-bindings/input/input.h>
 #include "imx7d.dtsi"
 
 / {
@@ -97,10 +96,85 @@
 	};
 };
 
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
 &cpu0 {
 	arm-supply = <&sw1a_reg>;
 };
 
+&ecspi3 {
+	fsl,spi-num-chipselects = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	tsc2046@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names ="default";
+		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 0>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <0>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <0>;
+		ti,pressure-max = /bits/ 16 <0>;
+		ti,x-plate-ohms = /bits/ 16 <400>;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -223,6 +297,44 @@
 	};
 };
 
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: timing0 {
+				clock-frequency = <9200000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <8>;
+				hback-porch = <4>;
+				hsync-len = <41>;
+				vback-porch = <2>;
+				vfront-porch = <4>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -231,21 +343,96 @@
 	status = "okay";
 };
 
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	enable-sdio-wakeup;
+	wakeup-source;
 	keep-power-in-suspend;
 	status = "okay";
 };
 
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
 	imx7d-sdb {
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
+				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
+				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
+				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+			>;
+		};
+
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
@@ -281,6 +468,51 @@
 			>;
 		};
 
+		pinctrl_lcdif: lcdifgrp {
+			fsl,pins = <
+				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO01__PWM1_OUT		0x110b0
+			>;
+		};
+
+		pinctrl_tsc2046_pendown: tsc2046_pendown {
+			fsl,pins = <
+				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
+			>;
+		};
 
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
@@ -404,5 +636,10 @@
 			>;
 		};
 
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B	0x74
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index c42cf8db0..51c13cbdf 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -1,5 +1,6 @@
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -40,56 +41,10 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/clock/imx7d-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx7d-pinfunc.h"
-#include "skeleton.dtsi"
+#include "imx7s.dtsi"
 
 / {
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-	};
-
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-			operating-points = <
-				/* KHz	uV */
-				996000	1075000
-				792000	975000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>,
-				 <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>;
-			clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main";
-		};
-
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
@@ -97,390 +52,77 @@
 		};
 	};
 
-	intc: interrupt-controller@31001000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x31001000 0x1000>,
-		      <0x31002000 0x1000>,
-		      <0x31004000 0x2000>,
-		      <0x31006000 0x2000>;
-	};
-
-	ckil: clock-cki {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		aips1: aips-bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30000000 0x400000>;
-			ranges;
-
-			gpio1: gpio@30200000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30200000 0x10000>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
-					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@30210000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30210000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@30220000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30220000 0x10000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@30230000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30230000 0x10000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio@30240000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30240000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@30250000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30250000 0x10000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio7: gpio@30260000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30260000 0x10000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpt1: gpt@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302d0000 0x10000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: gpt@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302e0000 0x10000>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt3: gpt@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302f0000 0x10000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: gpt@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x30300000 0x10000>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@30330000 {
-				compatible = "fsl,imx7d-iomuxc";
-				reg = <0x30330000 0x10000>;
-			};
-
-			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
-				reg = <0x30340000 0x10000>;
-			};
-
-			ocotp: ocotp-ctrl@30350000 {
-				compatible = "syscon";
-				reg = <0x30350000 0x10000>;
-				clocks = <&clks IMX7D_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
-					"syscon", "simple-bus";
-				reg = <0x30360000 0x10000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_1p0d: regulator-vdd1p0d@210 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p0d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					anatop-reg-offset = <0x210>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <8>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1200000>;
-					anatop-enable-bit = <31>;
-				};
-			};
-
-			snvs: snvs@30370000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x30370000 0x10000>;
+	etm@3007d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x3007d000 0x1000>;
 
-				snvs-rtc-lp@34 {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
+		/*
+		 * System will hang if added nosmp in kernel command line
+		 * without arm,primecell-periphid because amba bus try to
+		 * read id and core1 power off at this time.
+		 */
+		arm,primecell-periphid = <0xbb956>;
+		cpu = <&cpu1>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
 
-			clks: ccm@30380000 {
-				compatible = "fsl,imx7d-ccm";
-				reg = <0x30380000 0x10000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>;
-				clock-names = "ckil", "osc";
-			};
-
-			src: src@30390000 {
-				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
-				reg = <0x30390000 0x10000>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
+		port {
+			etm1_out_port: endpoint {
+				remote-endpoint = <&ca_funnel_in_port1>;
 			};
 		};
+	};
+};
 
-		aips3: aips-bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30800000 0x400000>;
-			ranges;
-
-			uart1: serial@30860000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
-					<&clks IMX7D_UART1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@30870000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30870000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
-					<&clks IMX7D_UART2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@30880000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
-					<&clks IMX7D_UART3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c1: i2c@30a20000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a20000 0x10000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@30a30000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a30000 0x10000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@30a40000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a40000 0x10000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@30a50000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a50000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			uart4: serial@30a60000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a60000 0x10000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
-					<&clks IMX7D_UART4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@30a70000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a70000 0x10000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
-					<&clks IMX7D_UART5_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@30a80000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a80000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
-					<&clks IMX7D_UART6_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+&aips3 {
+	usbotg2: usb@30b20000 {
+		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+		reg = <0x30b20000 0x200>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_USB_CTRL_CLK>;
+		fsl,usbphy = <&usbphynop2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		phy-clkgate-delay-us = <400>;
+		status = "disabled";
+	};
 
-			uart7: serial@30a90000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a90000 0x10000>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
-					<&clks IMX7D_UART7_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+	usbmisc2: usbmisc@30b20200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x30b20200 0x200>;
+	};
 
-			usdhc1: usdhc@30b40000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b40000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC1_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY2_CLK>;
+		clock-names = "main_clk";
+	};
 
-			usdhc2: usdhc@30b50000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b50000 0x10000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC2_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
+	fec2: ethernet@30bf0000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+		reg = <0x30bf0000 0x10000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "ptp",
+			"enet_clk_ref", "enet_out";
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		status = "disabled";
+	};
+};
 
-			usdhc3: usdhc@30b60000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b60000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC3_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
+&ca_funnel_ports {
+	port@1 {
+		reg = <1>;
+		ca_funnel_in_port1: endpoint {
+			slave-mode;
+			remote-endpoint = <&etm1_out_port>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
new file mode 100644
index 000000000..bd2a49c1a
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
new file mode 100644
index 000000000..b81013455
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
new file mode 100644
index 000000000..1e90bdbe3
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -0,0 +1,933 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			operating-points = <
+				/* KHz	uV */
+				996000	1075000
+				792000	975000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX7D_CLK_ARM>;
+		};
+	};
+
+	intc: interrupt-controller@31001000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x31001000 0x1000>,
+		      <0x31002000 0x1000>,
+		      <0x31004000 0x2000>,
+		      <0x31006000 0x2000>;
+	};
+
+	ckil: clock-cki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+	};
+
+	etr@30086000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30086000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etr_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	tpiu@30087000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0x30087000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			tpiu_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	etf@30084000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30084000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				etf_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&hugo_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				etf_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@30083000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30083000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				hugo_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ca_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				hugo_funnel_in_port1: endpoint {
+					slave-mode; /* M4 input */
+				};
+			};
+
+			port@2 {
+				reg = <0>;
+				hugo_funnel_out_port0: endpoint {
+					remote-endpoint = <&etf_in_port>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	funnel@30041000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30041000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ca_funnel_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				ca_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			/* funnel output port */
+			port@2 {
+				reg = <0>;
+				ca_funnel_out_port0: endpoint {
+					remote-endpoint = <&hugo_funnel_in_port0>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	etm@3007c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x3007c000 0x1000>;
+		cpu = <&cpu0>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm0_out_port: endpoint {
+				remote-endpoint = <&ca_funnel_in_port0>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		aips1: aips-bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30000000 0x400000>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@30250000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30250000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@30260000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			wdog1: wdog@30280000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+			};
+
+			wdog2: wdog@30290000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog3: wdog@302a0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog4: wdog@302b0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+				compatible = "fsl,imx7d-iomuxc-lpsr";
+				reg = <0x302c0000 0x10000>;
+				fsl,input-sel = <&iomuxc>;
+			};
+
+			gpt1: gpt@302d0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: gpt@302e0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt3: gpt@302f0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: gpt@30300000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x30300000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@30330000 {
+				compatible = "fsl,imx7d-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clks IMX7D_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+					"syscon", "simple-bus";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_1p0d: regulator-vdd1p0d {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p0d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					anatop-reg-offset = <0x210>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <8>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <31>;
+				};
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			clks: ccm@30380000 {
+				compatible = "fsl,imx7d-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>;
+				clock-names = "ckil", "osc";
+			};
+
+			src: src@30390000 {
+				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+		};
+
+		aips2: aips-bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30400000 0x400000>;
+			ranges;
+
+			adc1: adc@30610000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30610000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			adc2: adc@30620000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30620000 0x10000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			ecspi4: ecspi@30630000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30630000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
+					<&clks IMX7D_ECSPI4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+					 <&clks IMX7D_PWM1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+					 <&clks IMX7D_PWM2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+					 <&clks IMX7D_PWM3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+					 <&clks IMX7D_PWM4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif@30730000 {
+				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30730000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+		};
+
+		aips3: aips-bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30800000 0x400000>;
+			ranges;
+
+			ecspi1: ecspi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
+					<&clks IMX7D_ECSPI1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ecspi2: ecspi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
+					<&clks IMX7D_ECSPI2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ecspi3: ecspi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
+					<&clks IMX7D_ECSPI3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+					<&clks IMX7D_UART1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+					<&clks IMX7D_UART2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+					<&clks IMX7D_UART3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan1: can@30a00000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a00000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan2: can@30a10000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a10000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+					<&clks IMX7D_UART4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@30a70000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a70000 0x10000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+					<&clks IMX7D_UART5_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@30a80000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a80000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+					<&clks IMX7D_UART6_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart7: serial@30a90000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+					<&clks IMX7D_UART7_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			usbotg1: usb@30b10000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b10000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbh: usb@30b30000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b30000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop3>;
+				fsl,usbmisc = <&usbmisc3 0>;
+				phy_type = "hsic";
+				dr_mode = "host";
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@30b10200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b10200 0x200>;
+			};
+
+			usbmisc3: usbmisc@30b30200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b30200 0x200>;
+			};
+
+			usbphynop1: usbphynop1 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_PHY1_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usbphynop3: usbphynop3 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usdhc1: usdhc@30b40000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC1_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@30b50000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC2_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@30b60000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC3_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 3807d4f46..6fe0dd1d3 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -52,12 +52,13 @@
 	};
 
 	flash@24000000 {
-		compatible = "cfi-flash";
+		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x24000000 0x02000000>;
+		bank-width = <4>;
 	};
 
 	fpga {
-		compatible = "arm,amba-bus", "simple-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index cf06e32ee..4b34b54e0 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -42,7 +42,7 @@
 	};
 
 	syscon {
-		compatible = "arm,integrator-ap-syscon";
+		compatible = "arm,integrator-ap-syscon", "syscon";
 		reg = <0x11000000 0x100>;
 		interrupt-parent = <&pic>;
 		/* These are the logical module IRQs */
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index d43f15b4f..79430fbfe 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -94,7 +94,7 @@
 	};
 
 	syscon {
-		compatible = "arm,integrator-cp-syscon";
+		compatible = "arm,integrator-cp-syscon", "syscon";
 		reg = <0xcb000000 0x100>;
 	};
 
diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi
deleted file mode 100644
index 49fd414f6..000000000
--- a/arch/arm/boot/dts/k2l.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Lamarr SoC specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		/include/ "k2l-clocks.dtsi"
-
-		uart2: serial@02348400 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348400 0x100>;
-			clocks	= <&clkuart2>;
-			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		uart3:	serial@02348800 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348800 0x100>;
-			clocks	= <&clkuart3>;
-			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		dspgpio0: keystone_dsp_gpio@02620240 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x240>;
-		};
-
-		dspgpio1: keystone_dsp_gpio@2620244 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x244>;
-		};
-
-		dspgpio2: keystone_dsp_gpio@2620248 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x248>;
-		};
-
-		dspgpio3: keystone_dsp_gpio@262024c {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x24c>;
-		};
-
-		mdio: mdio@26200f00 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x26200f00 0x100>;
-			status = "disabled";
-			clocks = <&clkcpgmac>;
-			clock-names = "fck";
-			bus_freq	= <2500000>;
-		};
-		/include/ "k2l-netcp.dtsi"
-	};
-};
-
-&spi0 {
-       ti,davinci-spi-num-cs = <5>;
-};
-
-&spi1 {
-       ti,davinci-spi-num-cs = <3>;
-};
-
-&spi2 {
-       ti,davinci-spi-num-cs = <5>;
-       /* Pin muxed. Enabled and configured by Bootloader */
-       status = "disabled";
-};
diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
index d56d68fe7..d56d68fe7 100644
--- a/arch/arm/boot/dts/k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 50c83c21d..4c32ebc14 100644
--- a/arch/arm/boot/dts/k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -10,10 +10,10 @@
 /dts-v1/;
 
 #include "keystone.dtsi"
-#include "k2e.dtsi"
+#include "keystone-k2e.dtsi"
 
 / {
-	compatible =  "ti,k2e-evm","ti,keystone";
+	compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Edison EVM";
 
 	soc {
diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
index b13b3c94e..ac990f679 100644
--- a/arch/arm/boot/dts/k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -72,7 +72,17 @@ qmss: qmss@2a40000 {
 				qalloc-by-id;
 			};
 		};
+		accumulator {
+			acc-low-0 {
+				qrange = <480 32>;
+				accumulator = <0 47 16 2 50>;
+				interrupts = <0 226 0xf01>;
+				multi-queue;
+				qalloc-by-id;
+			};
+		};
 	};
+
 	descriptor-regions {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -83,6 +93,19 @@ qmss: qmss@2a40000 {
 			link-index = <0x4000>;
 		};
 	};
+
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			reg = <0x2a10000 0x1000    /*iram */
+			       0x2a0f000 0x100     /*reg*/
+			       0x2a0c000 0x3c8	   /*intd */
+			       0x2a20000 0x4000>;  /*cmd*/
+			id = <0>;
+		};
+	};
 }; /* qmss */
 
 knav_dmas: knav_dmas@0 {
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 675fb8e49..9a51b8c88 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -9,6 +9,9 @@
  */
 
 / {
+	compatible = "ti,k2e", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Edison SoC";
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -41,7 +44,7 @@
 	};
 
 	soc {
-		/include/ "k2e-clocks.dtsi"
+		/include/ "keystone-k2e-clocks.dtsi"
 
 		usb: usb@2680000 {
 			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
@@ -93,13 +96,16 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			reg =  <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
-			ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
-				0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
+			ranges = <0x82000000 0 0x60000000 0x60000000
+				  0 0x10000000>;
 
 			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
+			bus-range = <0x00 0xff>;
 
+			/* error interrupt */
+			interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
@@ -142,6 +148,6 @@
 			clock-names = "fck";
 			bus_freq	= <2500000>;
 		};
-		/include/ "k2e-netcp.dtsi"
+		/include/ "keystone-k2e-netcp.dtsi"
 	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
new file mode 100644
index 000000000..692fcbb14
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -0,0 +1,43 @@
+/*
+ * Device Tree Source for K2G EVM
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+
+/ {
+	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
+	model = "Texas Instruments K2G General Purpose EVM";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
+	};
+
+};
+
+&k2g_pinctrl {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
new file mode 100644
index 000000000..3372615b8
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -0,0 +1,97 @@
+/*
+ * Device Tree Source for K2G SOC
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/keystone.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,k2g","ti,keystone";
+	model = "Texas Instruments K2G SoC";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@02561000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x02561000 0x0 0x1000>,
+		      <0x0 0x02562000 0x0 0x2000>,
+		      <0x0 0x02564000 0x0 0x1000>,
+		      <0x0 0x02566000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,keystone","simple-bus";
+		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+
+		k2g_pinctrl: pinmux@02621000 {
+			compatible = "pinctrl-single";
+			reg = <0x02621000 0x410>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x001b0007>;
+		};
+
+		uart0: serial@02530c00 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02530c00 0x100>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+			clock-frequency = <200000000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
index af9b71905..af9b71905 100644
--- a/arch/arm/boot/dts/k2hk-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 660ebf58d..b38b34418 100644
--- a/arch/arm/boot/dts/k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -10,10 +10,10 @@
 /dts-v1/;
 
 #include "keystone.dtsi"
-#include "k2hk.dtsi"
+#include "keystone-k2hk.dtsi"
 
 / {
-	compatible =  "ti,k2hk-evm","ti,keystone";
+	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
 
 	soc {
diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
index 77a32c3c1..f86d6ddb8 100644
--- a/arch/arm/boot/dts/k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -47,6 +47,7 @@ qmss: qmss@2a40000 {
 				    "region", "push", "pop";
 		};
 	};
+
 	queue-pools {
 		qpend {
 			qpend-0 {
@@ -88,7 +89,17 @@ qmss: qmss@2a40000 {
 				qalloc-by-id;
 			};
 		};
+		accumulator {
+			acc-low-0 {
+				qrange = <480 32>;
+				accumulator = <0 47 16 2 50>;
+				interrupts = <0 226 0xf01>;
+				multi-queue;
+				qalloc-by-id;
+			};
+		};
 	};
+
 	descriptor-regions {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -99,6 +110,19 @@ qmss: qmss@2a40000 {
 			link-index = <0x4000>;
 		};
 	};
+
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			reg = <0x2a10000 0x1000    /*iram */
+			       0x2a0f000 0x100     /*reg*/
+			       0x2a0c000 0x3c8	   /*intd */
+			       0x2a20000 0x4000>;  /*cmd*/
+			id = <0>;
+		};
+	};
 }; /* qmss */
 
 knav_dmas: knav_dmas@0 {
diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index d0810a5f2..8f67fa8df 100644
--- a/arch/arm/boot/dts/k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -9,6 +9,9 @@
  */
 
 / {
+	compatible = "ti,k2hk", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Kepler/Hawking SoC";
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -41,7 +44,7 @@
 	};
 
 	soc {
-		/include/ "k2hk-clocks.dtsi"
+		/include/ "keystone-k2hk-clocks.dtsi"
 
 		dspgpio0: keystone_dsp_gpio@02620240 {
 			compatible = "ti,keystone-dsp-gpio";
@@ -109,6 +112,6 @@
 			clock-names = "fck";
 			bus_freq	= <2500000>;
 		};
-		/include/ "k2hk-netcp.dtsi"
+		/include/ "keystone-k2hk-netcp.dtsi"
 	};
 };
diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
index ef8464bb1..ef8464bb1 100644
--- a/arch/arm/boot/dts/k2l-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 9a69a6b55..7f9c2e94d 100644
--- a/arch/arm/boot/dts/k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -10,10 +10,10 @@
 /dts-v1/;
 
 #include "keystone.dtsi"
-#include "k2l.dtsi"
+#include "keystone-k2l.dtsi"
 
 / {
-	compatible =  "ti,k2l-evm","ti,keystone";
+	compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Lamarr EVM";
 
 	soc {
diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
index 6b95284d1..5acbd0dcc 100644
--- a/arch/arm/boot/dts/k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -72,7 +72,16 @@ qmss: qmss@2a40000 {
 				qalloc-by-id;
 			};
 		};
+		accumulator {
+			acc-low-0 {
+				qrange = <480 32>;
+				accumulator = <0 47 16 2 50>;
+				interrupts = <0 226 0xf01>;
+				multi-queue;
+			};
+		};
 	};
+
 	descriptor-regions {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -83,6 +92,20 @@ qmss: qmss@2a40000 {
 			link-index = <0x4000>;
 		};
 	};
+
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			reg = <0x2a10000 0x1000    /*iram */
+			       0x2a0f000 0x100     /*reg*/
+			       0x2a0c000 0x3c8	   /*intd */
+			       0x2a20000 0x4000>;  /*cmd*/
+			id = <0>;
+		};
+	};
+
 }; /* qmss */
 
 knav_dmas: knav_dmas@0 {
@@ -114,7 +137,7 @@ netcp: netcp@26000000 {
 	/* NetCP address range */
 	ranges = <0 0x26000000 0x1000000>;
 
-	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>;
 	dma-coherent;
 
 	ti,navigator-dmas = <&dma_gbe 0>,
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
new file mode 100644
index 000000000..2ee3d0ac2
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -0,0 +1,260 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	compatible = "ti,k2l", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Lamarr SoC";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		/include/ "keystone-k2l-clocks.dtsi"
+
+		uart2: serial@02348400 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348400 0x100>;
+			clocks	= <&clkuart2>;
+			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		uart3:	serial@02348800 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348800 0x100>;
+			clocks	= <&clkuart3>;
+			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		k2l_pmx: pinmux@02620690 {
+			compatible = "pinctrl-single";
+			reg = <0x02620690 0xc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x1>;
+			status = "disabled";
+
+			uart3_emifa_pins: pinmux_uart3_emifa_pins {
+				pinctrl-single,bits = <
+					/* UART3_EMIFA_SEL */
+					0x0 0x0  0xc0
+				>;
+			};
+
+			uart2_emifa_pins: pinmux_uart2_emifa_pins {
+			pinctrl-single,bits = <
+					/* UART2_EMIFA_SEL */
+					0x0 0x0  0x30
+				>;
+			};
+
+			uart01_spi2_pins: pinmux_uart01_spi2_pins {
+				pinctrl-single,bits = <
+					/* UART01_SPI2_SEL */
+					0x0 0x0 0x4
+				>;
+			};
+
+			dfesync_rp1_pins: pinmux_dfesync_rp1_pins{
+				pinctrl-single,bits = <
+					/* DFESYNC_RP1_SEL */
+					0x0 0x0 0x2
+				>;
+			};
+
+			avsif_pins: pinmux_avsif_pins {
+				pinctrl-single,bits = <
+					/* AVSIF_SEL */
+					0x0 0x0 0x1
+				>;
+			};
+
+			gpio_emu_pins: pinmux_gpio_emu_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
+				 * GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32
+				 * GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31
+				 * GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30
+				 * GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29
+				 * GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28
+				 * GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27
+				 * GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26
+				 * GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25
+				 * GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24
+				 * GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23
+				 * GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22
+				 * GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21
+				 * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20
+				 * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19
+				 */
+					0x4 0x0000 0xFFFE0000
+				>;
+			};
+
+			gpio_timio_pins: pinmux_gpio_timio_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7
+				 * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6
+				 * GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5
+				 * GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4
+				 * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3
+				 * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2
+				 * GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7
+				 * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6
+				 * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5
+				 * GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4
+				 * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3
+				 * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2
+				 */
+					0x4 0x0 0xFFF0
+				>;
+			};
+
+			gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4
+				 * GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3
+				 * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2
+				 * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1
+				 */
+					0x4 0x0 0xF
+				>;
+			};
+
+			gpio_dfeio_pins: pinmux_gpio_dfeio_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63
+				 * GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62
+				 * GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61
+				 * GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60
+				 * GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59
+				 * GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58
+				 * GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57
+				 * GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56
+				 * GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55
+				 * GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54
+				 * GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53
+				 * GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52
+				 * GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51
+				 * GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50
+				 * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49
+				 * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48
+				 */
+					0x8 0x0 0xFFFF0000
+				>;
+			};
+
+			gpio_emifa_pins: pinmux_gpio_emifa_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47
+				 * GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46
+				 * GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45
+				 * GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44
+				 * GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43
+				 * GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42
+				 * GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41
+				 * GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40
+				 * GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39
+				 * GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38
+				 * GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37
+				 * GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36
+				 * GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35
+				 * GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34
+				 * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33
+				 * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32
+				 */
+					0x8 0x0 0xFFFF
+				>;
+			};
+		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		dspgpio1: keystone_dsp_gpio@2620244 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x244>;
+		};
+
+		dspgpio2: keystone_dsp_gpio@2620248 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x248>;
+		};
+
+		dspgpio3: keystone_dsp_gpio@262024c {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x24c>;
+		};
+
+		mdio: mdio@26200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x26200f00 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
+		/include/ "keystone-k2l-netcp.dtsi"
+	};
+};
+
+&spi0 {
+       ti,davinci-spi-num-cs = <5>;
+};
+
+&spi1 {
+       ti,davinci-spi-num-cs = <3>;
+};
+
+&spi2 {
+       ti,davinci-spi-num-cs = <5>;
+       /* Pin muxed. Enabled and configured by Bootloader */
+       status = "disabled";
+};
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 72816d65f..e23f46d15 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -12,6 +12,7 @@
 #include "skeleton.dtsi"
 
 / {
+	compatible = "ti,keystone";
 	model = "Texas Instruments Keystone 2 SoC";
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -19,6 +20,9 @@
 
 	aliases {
 		serial0	= &uart0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
 	};
 
 	memory {
@@ -58,6 +62,14 @@
 			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
 	};
 
+	psci {
+		compatible	= "arm,psci";
+		method		= "smc";
+		cpu_suspend	= <0x84000001>;
+		cpu_off		= <0x84000002>;
+		cpu_on		= <0x84000003>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -136,7 +148,7 @@
 		};
 
 		spi0: spi@21000400 {
-			compatible = "ti,dm6441-spi";
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
 			reg = <0x21000400 0x200>;
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <0>;
@@ -147,7 +159,7 @@
 		};
 
 		spi1: spi@21000600 {
-			compatible = "ti,dm6441-spi";
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
 			reg = <0x21000600 0x200>;
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <0>;
@@ -158,7 +170,7 @@
 		};
 
 		spi2: spi@21000800 {
-			compatible = "ti,dm6441-spi";
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
 			reg = <0x21000800 0x200>;
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <0>;
@@ -282,13 +294,16 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			reg =  <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
-			ranges = <0x81000000 0 0 0x23250000 0 0x4000
-				0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
+			ranges = <0x82000000 0 0x50000000 0x50000000
+				  0 0x10000000>;
 
 			status = "disabled";
 			device_type = "pci";
 			num-lanes = <2>;
+			bus-range = <0x00 0xff>;
 
+			/* error interrupt */
+			interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
index 9e6e9e269..d573e03f3 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -1,6 +1,6 @@
 / {
-	mbus {
-		pciec: pcie-controller {
+	mbus@f1000000 {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 7dc7d6782..748d0b62f 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -1,6 +1,6 @@
 / {
-	mbus {
-		pciec: pcie-controller {
+	mbus@f1000000 {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 4680eec99..bb63d2d50 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,6 +1,6 @@
 / {
-	mbus {
-		pciec: pcie-controller {
+	mbus@f1000000 {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
index 9e1f741d7..720c210d4 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -1,6 +1,6 @@
 / {
-	mbus {
-		pciec: pcie-controller {
+	mbus@f1000000 {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
index d2936ad3a..d091ecb61 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/kirkwood-b3.dts
@@ -33,17 +33,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			/* Wifi model has Atheros chipset on pcie port */
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_power: pmx-button-power {
@@ -199,3 +188,11 @@
 	};
 };
 
+/* Wifi model has Atheros chipset on pcie port */
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
index fa02a9aff..f16a73e49 100644
--- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
@@ -36,13 +36,13 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button@1{
+		reset {
 			label = "Reset";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		button@2{
+		button {
 			label = "Power";
 			linux,code = <KEY_SLEEP>;
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
index 7ec76566a..555b7e4c5 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -60,7 +60,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
index 6b7856025..e1c25c35e 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/kirkwood-d2net.dts
@@ -10,6 +10,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-netxbig.dtsi"
 
 / {
@@ -28,6 +29,10 @@
 			label = "d2net_v2:blue:sata";
 			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
index c39dd766c..aee6f02b1 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -17,14 +17,12 @@
 / {
 	model = "Marvell DB-88F6281-BP Development Board";
 	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
+&pciec {
+        status = "okay";
+};
 
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
+&pcie0 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
index 701c6b6cd..e8b23e13e 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -17,18 +17,16 @@
 / {
 	model = "Marvell DB-88F6282-BP Development Board";
 	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
+&pciec {
+        status = "okay";
+};
 
-			pcie@1,0 {
-				status = "okay";
-			};
+&pcie0 {
+	status = "okay";
+};
 
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
+&pcie1 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index 0473fcc26..41acbb6dd 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -25,16 +25,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 =< &pmx_led_usb
@@ -203,7 +193,7 @@
 		};
 	};
 
-	dsa@0 {
+	dsa {
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -276,3 +266,11 @@
 &rtc {
 	status = "disabled";
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 113dcf056..d8fca9db4 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -13,17 +13,17 @@
 			     &pmx_button_reset>;
 		pinctrl-names = "default";
 
-		button@1 {
+		power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		eject {
 			label = "USB unmount button";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		reset {
 			label = "Reset button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
index 61f47fbe4..a85a46644 100644
--- a/arch/arm/boot/dts/kirkwood-ds111.dts
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -40,6 +40,6 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pcie1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
index bf4143c6c..6cef4bdbc 100644
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -14,7 +14,7 @@
 #include "kirkwood-synology.dtsi"
 
 / {
-	model = "Synology DS111";
+	model = "Synology DS112";
 	compatible = "synology,ds111", "marvell,kirkwood";
 
 	memory {
@@ -44,6 +44,10 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
index 99afd462f..7f32e7abf 100644
--- a/arch/arm/boot/dts/kirkwood-ds212.dts
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -43,6 +43,6 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pcie1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
index 623cd4a37..72e583074 100644
--- a/arch/arm/boot/dts/kirkwood-ds411.dts
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -48,6 +48,10 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
index a0a1fad8b..aaaf31b81 100644
--- a/arch/arm/boot/dts/kirkwood-ds411slim.dts
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -44,6 +44,6 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pcie1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index bfa5edde1..5bf628970 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -62,12 +62,12 @@
 		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
 		pinctrl-names = "default";
 
-		button@1 {
+		copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 38e31d15a..d25184ae4 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -19,16 +19,6 @@
 		linux,initrd-end   = <0x4800000>;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_reset: pmx-button-reset {
@@ -136,13 +126,13 @@
 		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
 		pinctrl-names = "default";
 
-		button@1 {
+		otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
@@ -194,3 +184,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index da674bbd4..4121674ab 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi
index 8367c772c..7962bdefd 100644
--- a/arch/arm/boot/dts/kirkwood-km_common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi
@@ -4,16 +4,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
@@ -34,7 +24,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c {
 		compatible = "i2c-gpio";
 		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
 			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
@@ -46,3 +36,11 @@
 	status = "okay";
 	chip-delay = <25>;
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts
index 24425660e..1b0f070c2 100644
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/kirkwood-laplug.dts
@@ -27,15 +27,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		serial@12000 {
 			status = "okay";
@@ -62,7 +53,7 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button@1{
+		power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -169,3 +160,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
new file mode 100644
index 000000000..6548e68a2
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
@@ -0,0 +1,192 @@
+/*
+ * Device Tree common file for kirkwood-6282 based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		usb_power: regulator@1 {
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
new file mode 100644
index 000000000..cf2e69f0d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
@@ -0,0 +1,186 @@
+/*
+ * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		usb_power: regulator@1 {
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
new file mode 100644
index 000000000..6dc0df296
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
@@ -0,0 +1,135 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-QVL
+ *
+ * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net>
+ *
+ * Based on kirkwood-linkstation-lswvl.dts,
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-QVL";
+	compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr2: pmx-led-hdderr2 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr3: pmx-led-hdderr3 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1
+			     &pmx_led_hdderr2
+			     &pmx_led_hdderr3>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr2-led {
+			label = "linkstation:red:hdderr2";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr3-led {
+			label = "linkstation:red:hdderr3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
new file mode 100644
index 000000000..edcba5c44
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
@@ -0,0 +1,57 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-VL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-VL";
+	compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
new file mode 100644
index 000000000..4b6450186
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
@@ -0,0 +1,57 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WSXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WSXL";
+	compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
new file mode 100644
index 000000000..954ec1d5b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
@@ -0,0 +1,112 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WVL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WVL";
+	compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
new file mode 100644
index 000000000..ecd5c12a8
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
@@ -0,0 +1,116 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WXL";
+	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
+			 &gpio1 15 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
new file mode 100644
index 000000000..36c54c9df
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
@@ -0,0 +1,201 @@
+/*
+ * Device Tree common file for kirkwood based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		function-button {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+		};
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power0: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
new file mode 100644
index 000000000..345fcac48
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -0,0 +1,240 @@
+/*
+ * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500)
+ *
+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
+ * (c) 2013 Deutsche Telekom Innovation Laboratories
+ * (c) 2014 Luka Perkov <luka@openwrt.org>
+ * (c) 2014 Randy C. Will <randall.will@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Linksys Viper (E4200v2 / EA4500)";
+	compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
+		pinctrl-names = "default";
+
+		wps {
+			label = "WPS Button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
+		pinctrl-names = "default";
+
+		white-health {
+			label = "viper:white:health";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-pulse {
+			label = "viper:white:pulse";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	dsa {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0port>;
+		dsa,mii-bus = <&mdio>;
+
+		switch@16,0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "ethernet1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "ethernet2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "ethernet3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "ethernet4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmx_led_white_health: pmx-led-white-health {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+	pmx_led_white_pulse: pmx-led-white-pulse {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+	pmx_btn_wps: pmx-btn-wps {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	pmx_btn_reset: pmx-btn-reset {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "u_env";
+			reg = <0x80000 0x20000>;
+		};
+
+		partition@A0000 {
+			label = "s_env";
+			reg = <0xA0000 0x20000>;
+		};
+
+		partition@200000 {
+			label = "kernel";
+			reg = <0x200000 0x2A0000>;
+		};
+
+		partition@4A0000 {
+			label = "rootfs";
+			reg = <0x4A0000 0x1760000>;
+		};
+
+		partition@1C00000 {
+			label = "alt_kernel";
+			reg = <0x1C00000 0x2A0000>;
+		};
+
+		partition@1EA0000 {
+			label = "alt_rootfs";
+			reg = <0x1EA0000 0x1760000>;
+		};
+
+		partition@3600000 {
+			label = "syscfg";
+			reg = <0x3600000 0x4A00000>;
+		};
+
+		partition@C0000 {
+			label = "unused";
+			reg = <0xC0000 0x140000>;
+		};
+
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex.
+ */
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+/* eth1 is connected to the switch at port 6. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion.
+ */
+&eth1 {
+	status = "disabled";
+};
+
+/* There is no battery on the board, so the RTC does not keep
+ * time when there is no power, making it useless.
+ */
+&rtc {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 1d6528d82..8b7c6ce79 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -107,18 +107,18 @@
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
 
-		button@1 {
+		option {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reserved {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		power {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
@@ -133,28 +133,28 @@
 			     &pmx_led_function_blue>;
 		pinctrl-names = "default";
 
-		led@1 {
+		func_blue {
 			label = "lsxl:blue:func";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		led@2 {
+		alarm {
 			label = "lsxl:red:alarm";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
-		led@3 {
+		info {
 			label = "lsxl:amber:info";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		led@4 {
+		power {
 			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		led@5 {
+		func_red {
 			label = "lsxl:red:func";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index f3a991837..aa413b0bc 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -17,16 +17,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_led_health: pmx-led-health {
@@ -215,3 +205,11 @@
 		phy-handle = <&ethphy1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index b7e7d78c4..172a38c0b 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -31,16 +31,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-        };
-
 	ocp@f1000000 {
 		pin-controller@10000 {
 			pmx_usb_led: pmx-usb-led {
@@ -109,19 +99,19 @@
 		pinctrl-0 = <&pmx_keys>;
 		pinctrl-names = "default";
 
-		button@1 {
+		restart {
 			label = "SWR Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	dsa@0 {
+	dsa {
 		compatible = "marvell,dsa";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -179,3 +169,11 @@
 		duplex = <1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts
index 7427ec50b..f53bcacf6 100644
--- a/arch/arm/boot/dts/kirkwood-nas2big.dts
+++ b/arch/arm/boot/dts/kirkwood-nas2big.dts
@@ -28,16 +28,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		rtc@10300 {
 			/* The on-chip RTC is not powered (no supercap). */
@@ -141,3 +131,11 @@
 		reg = <0x9100000 0x6f00000>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
index 36155b749..d2d44df9c 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -86,6 +86,66 @@
 			 clock-frequency = <32768>;
 	       };
 	};
+
+	netxbig-leds {
+		blue-sata2 {
+			label = "netxbig:blue:sata2";
+			mode-addr = <5>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata2 {
+			label = "netxbig:red:sata2";
+			mode-addr = <5>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata3 {
+			label = "netxbig:blue:sata3";
+			mode-addr = <6>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata3 {
+			label = "netxbig:red:sata3";
+			mode-addr = <6>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata4 {
+			label = "netxbig:blue:sata4";
+			mode-addr = <7>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata4 {
+			label = "netxbig:red:sata4";
+			mode-addr = <7>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+	};
 };
 
 &mdio {
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index fd733c63b..c0413b63c 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -28,16 +28,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_power: pmx-button-power {
@@ -193,7 +183,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		usb3_regulator: usb3-regulator {
+		usb3_regulator: usb3-regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "USB 3.0 Power";
@@ -251,3 +241,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
index b514d643f..2bfc6cfa1 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -28,18 +28,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to NEC uPD720200 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_power: pmx-button-power {
@@ -205,7 +193,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		usb3_regulator: usb3-regulator {
+		usb3_regulator: usb3-regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "USB 3.0 Power";
@@ -265,3 +253,12 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+/* Connected to NEC uPD720200 USB 3.0 controller */
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
index 1508b1214..52b58fe0c 100644
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
@@ -13,6 +13,7 @@
  * warranty of any kind, whether express or implied.
 */
 
+#include <dt-bindings/leds/leds-netxbig.h>
 #include "kirkwood.dtsi"
 #include "kirkwood-6281.dtsi"
 
@@ -58,22 +59,22 @@
 		#size-cells = <0>;
 
 		/*
-		 * button@1 and button@2 represent a three position rocker
+		 * esc and power represent a three position rocker
 		 * switch. Thus the conventional KEY_POWER does not fit
 		 */
-		button@1 {
+		exc {
 			label = "Back power switch (on|auto)";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		power {
 			label = "Back power switch (auto|off)";
 			linux,code = <KEY_1>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		option {
 			label = "Function button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
@@ -105,6 +106,85 @@
 			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	netxbig_gpio_ext: netxbig-gpio-ext {
+		compatible = "lacie,netxbig-gpio-ext";
+
+		addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+			      &gpio1 16 GPIO_ACTIVE_HIGH
+			      &gpio1 17 GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+			      &gpio1 13 GPIO_ACTIVE_HIGH
+			      &gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+	};
+
+	netxbig-leds {
+		compatible = "lacie,netxbig-leds";
+
+		gpio-ext = <&netxbig_gpio_ext>;
+
+		timers = <NETXBIG_LED_TIMER1 500 500
+			  NETXBIG_LED_TIMER2 500 1000>;
+
+		blue-power {
+			label = "netxbig:blue:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 1
+				    NETXBIG_LED_TIMER1 3
+				    NETXBIG_LED_TIMER2 7>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		red-power {
+			label = "netxbig:red:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		blue-sata0 {
+			label = "netxbig:blue:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata0 {
+			label = "netxbig:red:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata1 {
+			label = "netxbig:blue:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata1 {
+			label = "netxbig:red:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+	};
 };
 
 &mdio {
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index e832b6320..282605f4c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -57,7 +57,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -83,7 +83,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy {
+	ethphy0: ethernet-phy@X {
                 /* overwrite reg property in board file */
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index 53368d102..190189d23 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
index 1f2ca60d8..2c661add0 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -26,7 +26,7 @@
 		blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 72c78d0b1..55cc41d9c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -46,6 +47,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index c441bf62c..9935f3ec2 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -47,6 +48,10 @@
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 6139df0f3..0b69ee493 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -15,16 +15,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_unknown>;
@@ -138,3 +128,11 @@
 		};
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
index 24f686d10..6ab104b4b 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -27,16 +27,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-names = "default";
@@ -193,10 +183,19 @@
 		};
 	};
 
+	hwmon {
+		compatible = "zyxel,nsa320-mcu";
+		pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
+		pinctrl-names = "default";
+
+		data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+	};
+
 	/* The following pins are currently not assigned to a driver,
 	   some of them should be configured as inputs.
-	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
-		     &pmx_htp &pmx_vid_b1
+	pinctrl-0 = <&pmx_htp &pmx_vid_b1
 		     &pmx_power_resume_data &pmx_power_resume_clk>; */
 };
 
@@ -213,3 +212,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
new file mode 100644
index 000000000..36c64816b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -0,0 +1,235 @@
+/* Device tree file for the Zyxel NSA 325 NAS box.
+ *
+ * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann
+ */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "ZyXEL NSA325";
+	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Buzzer needs to be switched at around 1kHz so is
+			 * not compatible with the gpio-beeper driver.
+			 */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_sata1: pmx-pwr-sata1 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		/* This board uses the pcf8563 RTC instead of the SoC RTC */
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_pwr_sata1>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa325:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa325:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa325:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa325:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa325:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa325:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa325:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa325:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa325:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+		     &pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+	};
+
+
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
index 2075a2e82..e09b79ac7 100644
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -4,16 +4,6 @@
 / {
 	model = "ZyXEL NSA310";
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 
@@ -77,17 +67,17 @@
 		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
 		pinctrl-names = "default";
 
-		button@1 {
+		power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		button@2 {
+		copy {
 			label = "Copy Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
@@ -157,3 +147,11 @@
 		reg = <0x5040000 0x2fc0000>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index fb9dc2272..0db0e3edc 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -117,7 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Init Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
index d5e3bc518..cf2f5240e 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -135,7 +135,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		button {
 			label = "Init Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
index 887b9c1fe..96ff59d68 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
@@ -20,6 +20,9 @@
 	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	ocp@f1000000 {
+		audio-controller@a0000 {
+			status = "okay";
+		};
 		i2c@11000 {
 			status = "okay";
 			clock-frequency = <400000>;
@@ -27,6 +30,7 @@
 			cs42l51: cs42l51@4a {
 				compatible = "cirrus,cs42l51";
 				reg = <0x4a>;
+				#sound-dai-cells = <0>;
 			};
 		};
 	};
@@ -37,7 +41,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0>;
+			sound-dai = <&audio0 0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
index d3330dadf..7175511a9 100644
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi
@@ -25,22 +25,12 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
 			pinctrl-names = "default";
 
-			pmx_select28: pmx-select-uart-sd {
+			pmx_select28: pmx-select-rs232-rs485 {
 				marvell,pins = "mpp28";
 				marvell,function = "gpio";
 			};
@@ -48,7 +38,7 @@
 				marvell,pins = "mpp29";
 				marvell,function = "gpio";
 			};
-			pmx_select34: pmx-select-rs232-rs484 {
+			pmx_select34: pmx-select-uart-sd {
 				marvell,pins = "mpp34";
 				marvell,function = "gpio";
 			};
@@ -65,6 +55,43 @@
 			status = "okay";
 			cd-gpios = <&gpio0 29 9>;
 		};
+		gpio@10100 {
+			p28 {
+				gpio-hog;
+				gpios = <28 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelRS232or485 selects between RS-232 or RS-485
+				 * mode for the second UART.
+				 *
+				 * Low: RS-232
+				 * High: RS-485
+				 *
+				 * To use the second UART, you need to change also
+				 * the SelUARTorSD.
+				 */
+				output-low;
+				line-name = "SelRS232or485";
+			};
+		};
+		gpio@10140 {
+			p2 {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelUARTorSD selects between the second UART
+				 * (serial@12100) and SD (mvsdio@90000).
+				 *
+				 * Low: UART
+				 * High: SD
+				 *
+				 * When changing this line make sure the newly
+				 * selected device node is enabled and the
+				 * previously selected device node is disabled.
+				 */
+				output-high; /* Select SD by default */
+				line-name = "SelUARTorSD";
+			};
+		};
 	};
 };
 
@@ -88,3 +115,11 @@
 		reg = <0x0600000 0x1FA00000>;
 	};
 };
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
new file mode 100644
index 000000000..b2f26239d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
@@ -0,0 +1,179 @@
+/*
+ * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
+ * inspired by the board files made by Kevin Mihelich for ArchLinux,
+ * and their DTS file.
+ *
+ * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Cloud Engines PogoPlug Series 4";
+	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "uart0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_eject>;
+		pinctrl-names = "default";
+
+		eject {
+			debounce_interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_EJECTCD>;
+			label = "Eject Button";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+		pinctrl-names = "default";
+
+		health {
+			label = "pogoplugv4:green:health";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		fault {
+			label = "pogoplugv4:red:fault";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_sata0: pmx-sata0 {
+		marvell,pins = "mpp21";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata1: pmx-sata1 {
+		marvell,pins = "mpp20";
+		marvell,function = "sata1";
+	};
+
+	pmx_sdio_cd: pmx-sdio-cd {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	pmx_sdio_wp: pmx-sdio-wp {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_eject: pmx-button-eject {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_green: pmx-led-green {
+		marvell,pins = "mpp22";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_red: pmx-led-red {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/*
+ * This PCIE controller has a USB 3.0 XHCI controller at 1,0
+ */
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	nr-ports = <1>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+	pinctrl-names = "default";
+	cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+};
+
+&nand {
+	/* 128 MiB of NAND flash */
+	chip-delay = <40>;
+	status = "okay";
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x00000000 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "uImage";
+			reg = <0x00200000 0x300000>;
+		};
+
+		partition@500000 {
+			label = "uImage2";
+			reg = <0x00500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "failsafe";
+			reg = <0x00800000 0x800000>;
+		};
+
+		partition@1000000 {
+			label = "root";
+			reg = <0x01000000 0x7000000>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
index e0b959396..b8af90724 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
@@ -29,16 +29,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_usb_power>;
@@ -108,4 +98,12 @@
         ethernet0-port@0 {
                 phy-handle = <&ethphy0>;
         };
-};
\ No newline at end of file
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
index f2e08b3b3..6f771a99c 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
@@ -19,7 +19,7 @@
 	model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
 	compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-	dsa@0 {
+	dsa {
 		switch@0 {
 			reg = <10 0>;	 /* MDIO address 10, switch 0 in tree */
 		};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
index f4272b64e..1a797381d 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -19,7 +19,7 @@
 	model = "Marvell RD88f6281 Reference design, with Z0 SoC";
 	compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-	dsa@0 {
+	dsa {
 		switch@0 {
 			reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
 			port@4 {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index d195e884b..d5aacf137 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -25,16 +25,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-names = "default";
@@ -63,7 +53,7 @@
 		};
 	};
 
-	dsa@0 {
+	dsa {
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -134,3 +124,11 @@
 		duplex = <1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
index 3b19f1fd4..2c722ecd5 100644
--- a/arch/arm/boot/dts/kirkwood-rs212.dts
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -44,6 +44,10 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 04015c174..65e9524e8 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -10,20 +10,6 @@
  */
 
 / {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			pcie2: pcie@2,0 {
-				status = "disabled";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_alarmled_12: pmx-alarmled-12 {
@@ -861,3 +847,11 @@
 		phy-handle = <&ethphy1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index ed956b849..3500f4738 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -30,16 +30,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
@@ -173,7 +163,7 @@
 		pinctrl-0 = <&pmx_button_power>;
 		pinctrl-names = "default";
 
-		button@1 {
+		power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
@@ -217,7 +207,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy {
+	ethphy0: ethernet-phy@8 {
 		device_type = "ethernet-phy";
 		reg = <8>;
 	};
@@ -229,3 +219,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index f5c8c0dd4..1e9a72100 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -129,7 +129,7 @@
 		disk {
 			label = "topkick:yellow:disk";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 		system2 {
 			label = "topkick:red:system";
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index 9767d73f3..ee62204e4 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -39,12 +39,12 @@
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		button@1 {
+		copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index bfc1a32d4..3437bb396 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -5,16 +5,6 @@
 #include "kirkwood-ts219.dtsi"
 
 / {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 
@@ -49,12 +39,12 @@
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		button@1 {
+		copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
@@ -63,3 +53,5 @@
 };
 
 &ethphy0 { reg = <0>; };
+
+&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index c56ab6bbf..62e5e2d5c 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -12,16 +12,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		i2c@11000 {
 			status = "okay";
@@ -40,7 +30,7 @@
 		};
 		poweroff@12100 {
 			compatible = "qnap,power-off";
-			reg = <0x12000 0x100>;
+			reg = <0x12100 0x100>;
 			clocks = <&gate_clk 7>;
 		};
 		spi@10600 {
@@ -94,7 +84,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy {
+	ethphy0: ethernet-phy@X {
                 /* overwrite reg property in board file */
 	};
 };
@@ -105,3 +95,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
index d7512d4cd..e3e71f48a 100644
--- a/arch/arm/boot/dts/kirkwood-ts419-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
@@ -16,17 +16,8 @@
 #include "kirkwood-ts219.dtsi"
 #include "kirkwood-ts419.dtsi"
 
-/ {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-};
-
 &ethphy0 { reg = <0>; };
 &ethphy1 { reg = <1>; };
+
+&pciec { status = "okay"; };
+&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi
index 30ab93bfb..02bd53762 100644
--- a/arch/arm/boot/dts/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi
@@ -45,12 +45,12 @@
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		button@1 {
+		copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 464f09a1a..29b8bd7e0 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -27,7 +27,7 @@
 	       i2c0 = &i2c0;
 	};
 
-	mbus {
+	mbus@f1000000 {
 		compatible = "marvell,kirkwood-mbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
@@ -40,16 +40,6 @@
 		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
 		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
 
-		cesa: crypto@0301 {
-			compatible = "marvell,orion-crypto";
-			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
-			      <MBUS_ID(0x03, 0x01) 0 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <22>;
-			clocks = <&gate_clk 17>;
-			status = "okay";
-		};
-
 		nand: nand@012f {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -65,6 +55,14 @@
 			pinctrl-names = "default";
 			status = "disabled";
 		};
+
+		crypto_sram: sa-sram@0301 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
+			clocks = <&gate_clk 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 
 	ocp@f1000000 {
@@ -252,6 +250,17 @@
 			status = "okay";
 		};
 
+		cesa: crypto@30000 {
+			compatible = "marvell,kirkwood-crypto";
+			reg = <0x30000 0x10000>;
+			reg-names = "regs";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			marvell,crypto-srams = <&crypto_sram>;
+			marvell,crypto-sram-size = <0x800>;
+			status = "okay";
+		};
+
 		usb0: ehci@50000 {
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
@@ -372,7 +381,7 @@
 
 		audio0: audio-controller@a0000 {
 			compatible = "marvell,kirkwood-audio";
-			#sound-dai-cells = <0>;
+			#sound-dai-cells = <1>;
 			reg = <0xa0000 0x2210>;
 			interrupts = <24>;
 			clocks = <&gate_clk 9>;
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
new file mode 100644
index 000000000..da8598402
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -0,0 +1,268 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
+	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+
+		sysboot2 {
+			label = "gpio3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* gpio_111 / uP_GPIO_3 */
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3logic";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins &led_pins_wkup>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;	/* gpio133 */
+			linux,default-trigger = "cpu0";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;	/* gpio11 */
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+&gpmc {
+	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;		/* gpio_152 */
+		reg = <1 0 0xff>;
+	};
+};
+
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&video_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins1>;
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	video_reg: video_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcd0: display@0 {
+		compatible = "panel-dpi";
+		label = "28";
+		status = "okay";
+		/* default-on; */
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_pin>;
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <3>;
+			vfront-porch = <2>;
+			vsync-len = <11>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&twl_pwm 0 5000000>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
+	cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;		/* gpio_110 */
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_xclkb.gpio_111 / uP_GPIO_3*/
+		>;
+	};
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */
+		>;
+	};
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 sdmmc1_wp*/
+		>;
+	};
+
+	lcd_enable_pin: pinmux_lcd_enable_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	led_pins_wkup: pinmux_led_pins_wkup {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 / uP_GPIO_1 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
+		>;
+	};
+
+	mmc1_cd: pinmux_mmc1_cd {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
+		>;
+	};
+};
+
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
new file mode 100644
index 000000000..0ff1c2de9
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -0,0 +1,266 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 3 0>;   /* gpio_3 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */
+
+		x-loader@0 {
+			label = "x-loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "u-boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "u-boot-env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "fs";
+			reg = <0x680000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc3 {
+	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	pinctrl-0 = <&mmc3_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1273";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
+
+	mmc3_pins: pinmux_mm3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
+			OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
+		>;
+	};
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
+		>;
+	};
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
+		>;
+	};
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+
+
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_reset_pin>;
+	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 91146c318..08cce17a2 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -11,8 +11,8 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 / {
-	model = "LogicPD Zoom DM3730 Torpedo Development Kit";
-	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
+	model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
+	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
 
 	gpio_keys {
 		compatible = "gpio-keys";
@@ -23,31 +23,37 @@
 			label = "sysboot2";
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;	/* gpio2 */
 			linux,code = <BTN_0>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		sysboot5 {
 			label = "sysboot5";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;	/* gpio7 */
 			linux,code = <BTN_1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		gpio1 {
 			label = "gpio1";
 			gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;	/* gpio181 */
 			linux,code = <BTN_2>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		gpio2 {
 			label = "gpio2";
 			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;	/* gpio178 */
 			linux,code = <BTN_3>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3logic";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -65,6 +71,29 @@
 			linux,default-trigger = "none";
 		};
 	};
+
+	pwm10: dmtimer-pwm {
+		compatible = "ti,omap-dmtimer-pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_pins>;
+		ti,timers = <&timer10>;
+		#pwm-cells = <3>;
+	};
+
+};
+
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+	status = "okay";
 };
 
 &charger {
@@ -73,7 +102,8 @@
 };
 
 &gpmc {
-	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
@@ -84,6 +114,80 @@
 	};
 };
 
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&video_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins1>;
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	video_reg: video_reg {
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pwr_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
+	};
+
+	lcd0: display {
+		compatible = "panel-dpi";
+		label = "15";
+		status = "okay";
+		/* default-on; */
+		pinctrl-names = "default";
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <3>;
+			vfront-porch = <4>;
+			vsync-len = <11>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm10 0 5000000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
+	};
+};
+
 &mmc1 {
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
@@ -102,6 +206,12 @@
 		>;
 	};
 
+	pwm_pins: pinmux_pwm_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */
+		>;
+	};
+
 	led_pins: pinmux_led_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)	/* gpio_179 */
@@ -119,6 +229,71 @@
 			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_dx.gpio_154 */
+		>;
+	};
+
+	isp_pins: pinmux_isp_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0)   /* cam_hs.cam_hs */
+			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0)   /* cam_vs.cam_vs */
+			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
+			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
+
+			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)   /* cam_d6.cam_d6 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)   /* cam_d7.cam_d7 */
+		>;
+	};
+
+	panel_pwr_pins: pinmux_panel_pwr_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
 };
 
 &omap3_pmx_wkup {
@@ -142,12 +317,84 @@
 	};
 };
 
+&i2c2 {
+	mt9p031@48 {
+		compatible = "aptina,mt9p031";
+		reg = <0x48>;
+		clocks = <&isp 0>;
+		vaa-supply = <&vaux4>;
+		vdd-supply = <&vaux4>;
+		vdd_io-supply = <&vaux4>;
+		port {
+			mt9p031_out: endpoint {
+				input-clock-frequency = <24000000>;
+				pixel-clock-frequency = <72000000>;
+				remote-endpoint = <&ccdc_ep>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		vio-supply = <&vaux1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&mcspi1 {
+	at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+
+		pagesize = <64>;
+		size = <32768>;
+		address-width = <16>;
+	};
+};
+
+&isp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&isp_pins>;
+	ports {
+		port@0 {
+			reg = <0>;
+			ccdc_ep: endpoint {
+				remote-endpoint = <&mt9p031_out>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pclk-sample = <0>;
+			};
+		};
+	};
+};
+
 &uart1 {
 	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
 };
 
 /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
 &usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
 	phys = <&usb2_phy>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 36387b114..1c2c74655 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -35,13 +35,18 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
@@ -96,6 +101,24 @@
 		reg = <0x48>;
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	at24@50 {
+		compatible = "at24,24c02";
+		readonly;
+		reg = <0x50>;
 	};
 };
 
@@ -122,6 +145,7 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
 		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
 	};
 };
 
@@ -136,6 +160,59 @@
 			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr.gpio_157 */
 		>;
 	};
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
+		>;
+	};
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
+		>;
+	};
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 204da5b52..fdb736c82 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -13,6 +13,12 @@
 
 #include "armv7-m.dtsi"
 
+#include "dt-bindings/clock/lpc18xx-cgu.h"
+#include "dt-bindings/clock/lpc18xx-ccu.h"
+
+#define LPC_PIN(port, pin)	(0x##port * 32 + pin)
+#define LPC_GPIO(port, pin)	(port * 32 + pin)
+
 / {
 	cpus {
 		#address-cells = <1>;
@@ -22,6 +28,7 @@
 			compatible = "arm,cortex-m3";
 			device_type = "cpu";
 			reg = <0x0>;
+			clocks = <&ccu1 CLK_CPU_CORE>;
 		};
 	};
 
@@ -32,32 +39,283 @@
 			clock-frequency = <12000000>;
 		};
 
-		/* Temporary hardcode PLL1 until clk drivers are merged */
-		pll1: pll1 {
-			compatible = "fixed-factor-clock";
-			clocks = <&xtal>;
+		xtal32: xtal32 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		enet_rx_clk: enet_rx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_rx_clk";
+		};
+
+		enet_tx_clk: enet_tx_clk {
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <12>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_tx_clk";
+		};
+
+		gp_clkin: gp_clkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "gp_clkin";
 		};
 	};
 
 	soc {
+		sct_pwm: pwm@40000000 {
+			compatible = "nxp,lpc1850-sct-pwm";
+			reg = <0x40000000 0x1000>;
+			clocks =<&ccu1 CLK_CPU_SCT>;
+			clock-names = "pwm";
+			resets = <&rgu 37>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		dmac: dma-controller@40002000 {
+			compatible = "arm,pl080", "arm,primecell";
+			arm,primecell-periphid = <0x00041080>;
+			reg = <0x40002000 0x1000>;
+			interrupts = <2>;
+			clocks = <&ccu1 CLK_CPU_DMA>;
+			clock-names = "apb_pclk";
+			resets = <&rgu 19>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			lli-bus-interface-ahb1;
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb1;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+		};
+
+		spifi: flash-controller@40003000 {
+			compatible = "nxp,lpc1773-spifi";
+			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+			reg-names = "spifi", "flash";
+			interrupts = <30>;
+			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+			clock-names = "spifi", "reg";
+			resets = <&rgu 53>;
+			status = "disabled";
+		};
+
+		mmcsd: mmcsd@40004000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x40004000 0x1000>;
+			interrupts = <6>;
+			num-slots = <1>;
+			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
+			clock-names = "ciu", "biu";
+			resets = <&rgu 20>;
+			status = "disabled";
+		};
+
+		usb0: ehci@40006100 {
+			compatible = "nxp,lpc1850-ehci", "generic-ehci";
+			reg = <0x40006100 0x100>;
+			interrupts = <8>;
+			clocks = <&ccu1 CLK_CPU_USB0>;
+			resets = <&rgu 17>;
+			phys = <&usb0_otg_phy>;
+			phy-names = "usb";
+			has-transaction-translator;
+			status = "disabled";
+		};
+
+		usb1: ehci@40007100 {
+			compatible = "nxp,lpc1850-ehci", "generic-ehci";
+			reg = <0x40007100 0x100>;
+			interrupts = <9>;
+			clocks = <&ccu1 CLK_CPU_USB1>;
+			resets = <&rgu 18>;
+			status = "disabled";
+		};
+
+		emc: memory-controller@40005000 {
+			compatible = "arm,pl172", "arm,primecell";
+			reg = <0x40005000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+			clock-names = "mpmcclk", "apb_pclk";
+			resets = <&rgu 21>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x1c000000 0x1000000
+				  1 0 0x1d000000 0x1000000
+				  2 0 0x1e000000 0x1000000
+				  3 0 0x1f000000 0x1000000>;
+			status = "disabled";
+		};
+
+		lcdc: lcd-controller@40008000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x40008000 0x1000>;
+			interrupts = <7>;
+			interrupt-names = "combined";
+			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
+			resets = <&rgu 16>;
+			status = "disabled";
+		};
+
+		eeprom: eeprom@4000e000 {
+			compatible = "nxp,lpc1857-eeprom";
+			reg = <0x4000e000 0x1000>, <0x20040000 0x4000>;
+			reg-names = "reg", "mem";
+			clocks = <&ccu1 CLK_CPU_EEPROM>;
+			clock-names = "eeprom";
+			resets = <&rgu 27>;
+			interrupts = <4>;
+			status = "disabled";
+		};
+
+		mac: ethernet@40010000 {
+			compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+			reg = <0x40010000 0x2000>;
+			interrupts = <5>;
+			interrupt-names	= "macirq";
+			clocks = <&ccu1 CLK_CPU_ETHERNET>;
+			clock-names = "stmmaceth";
+			resets = <&rgu 22>;
+			reset-names = "stmmaceth";
+			status = "disabled";
+		};
+
+		creg: syscon@40043000 {
+			compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+			reg = <0x40043000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_CREG>;
+			resets = <&rgu 5>;
+
+			creg_clk: clock-controller {
+				compatible = "nxp,lpc1850-creg-clk";
+				clocks = <&xtal32>;
+				#clock-cells = <1>;
+			};
+
+			usb0_otg_phy: phy {
+				compatible = "nxp,lpc1850-usb-otg-phy";
+				clocks = <&ccu1 CLK_USB0>;
+				#phy-cells = <0>;
+			};
+
+			dmamux: dma-mux {
+				compatible = "nxp,lpc1850-dmamux";
+				#dma-cells = <3>;
+				dma-requests = <64>;
+				dma-masters = <&dmac>;
+			};
+		};
+
+		rtc: rtc@40046000 {
+			compatible = "nxp,lpc1850-rtc", "nxp,lpc1788-rtc";
+			reg = <0x40046000 0x1000>;
+			interrupts = <47>;
+			clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+			clock-names = "rtc", "reg";
+		};
+
+		cgu: clock-controller@40050000 {
+			compatible = "nxp,lpc1850-cgu";
+			reg = <0x40050000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+		};
+
+		ccu1: clock-controller@40051000 {
+			compatible = "nxp,lpc1850-ccu";
+			reg = <0x40051000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&cgu BASE_APB3_CLK>,   <&cgu BASE_APB1_CLK>,
+				 <&cgu BASE_SPIFI_CLK>,  <&cgu BASE_CPU_CLK>,
+				 <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+				 <&cgu BASE_USB1_CLK>,   <&cgu BASE_SPI_CLK>;
+			clock-names = "base_apb3_clk",   "base_apb1_clk",
+				      "base_spifi_clk",  "base_cpu_clk",
+				      "base_periph_clk", "base_usb0_clk",
+				      "base_usb1_clk",   "base_spi_clk";
+		};
+
+		ccu2: clock-controller@40052000 {
+			compatible = "nxp,lpc1850-ccu";
+			reg = <0x40052000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+				 <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+				 <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+				 <&cgu BASE_SSP0_CLK>,  <&cgu BASE_SDIO_CLK>;
+			clock-names = "base_audio_clk", "base_uart3_clk",
+				      "base_uart2_clk", "base_uart1_clk",
+				      "base_uart0_clk", "base_ssp1_clk",
+				      "base_ssp0_clk",  "base_sdio_clk";
+		};
+
+		rgu: reset-controller@40053000 {
+			compatible = "nxp,lpc1850-rgu";
+			reg = <0x40053000 0x1000>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+			clock-names = "delay", "reg";
+			#reset-cells = <1>;
+		};
+
+		watchdog@40080000 {
+			compatible = "nxp,lpc1850-wwdt";
+			reg = <0x40080000 0x24>;
+			interrupts = <49>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+			clock-names = "wdtclk", "reg";
+		};
+
 		uart0: serial@40081000 {
-			compatible = "ns16550a";
+			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x40081000 0x1000>;
 			reg-shift = <2>;
 			interrupts = <24>;
-			clocks = <&pll1>;
+			clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 44>;
+			dmas = <&dmamux  1 1 2
+				&dmamux  2 1 2
+				&dmamux 11 2 2
+				&dmamux 12 2 2>;
+			dma-names = "tx", "rx", "tx", "rx";
 			status = "disabled";
 		};
 
 		uart1: serial@40082000 {
-			compatible = "ns16550a";
+			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x40082000 0x1000>;
 			reg-shift = <2>;
 			interrupts = <25>;
-			clocks = <&pll1>;
+			clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 45>;
+			dmas = <&dmamux 3 1 2
+				&dmamux 4 1 2>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		ssp0: spi@40083000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x40083000 0x1000>;
+			interrupts = <22>;
+			clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 50>;
+			dmas = <&dmamux  9 0 2
+				&dmamux 10 0 2>;
+			dma-names = "rx", "tx";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -65,33 +323,73 @@
 			compatible = "nxp,lpc3220-timer";
 			reg = <0x40084000 0x1000>;
 			interrupts = <12>;
-			clocks = <&pll1>;
+			clocks = <&ccu1 CLK_CPU_TIMER0>;
 			clock-names = "timerclk";
+			resets = <&rgu 32>;
 		};
 
 		timer1: timer@40085000 {
 			compatible = "nxp,lpc3220-timer";
 			reg = <0x40085000 0x1000>;
 			interrupts = <13>;
-			clocks = <&pll1>;
+			clocks = <&ccu1 CLK_CPU_TIMER1>;
 			clock-names = "timerclk";
+			resets = <&rgu 33>;
+		};
+
+		pinctrl: pinctrl@40086000 {
+			compatible = "nxp,lpc1850-scu";
+			reg = <0x40086000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_SCU>;
+		};
+
+		i2c0: i2c@400a1000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400a1000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu1 CLK_APB1_I2C0>;
+			resets = <&rgu 48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can1: can@400a4000 {
+			compatible = "bosch,c_can";
+			reg = <0x400a4000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu1 CLK_APB1_CAN1>;
+			resets = <&rgu 54>;
+			status = "disabled";
 		};
 
 		uart2: serial@400c1000 {
-			compatible = "ns16550a";
+			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x400c1000 0x1000>;
 			reg-shift = <2>;
 			interrupts = <26>;
-			clocks = <&pll1>;
+			clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 46>;
+			dmas = <&dmamux 5 1 2
+				&dmamux 6 1 2>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
 		uart3: serial@400c2000 {
-			compatible = "ns16550a";
+			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x400c2000 0x1000>;
 			reg-shift = <2>;
 			interrupts = <27>;
-			clocks = <&pll1>;
+			clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 47>;
+			dmas = <&dmamux  7 1 2
+				&dmamux  8 1 2
+				&dmamux 13 3 2
+				&dmamux 14 3 2>;
+			dma-names = "tx", "rx", "rx", "tx";
 			status = "disabled";
 		};
 
@@ -99,16 +397,135 @@
 			compatible = "nxp,lpc3220-timer";
 			reg = <0x400c3000 0x1000>;
 			interrupts = <14>;
-			clocks = <&pll1>;
+			clocks = <&ccu1 CLK_CPU_TIMER2>;
 			clock-names = "timerclk";
+			resets = <&rgu 34>;
 		};
 
 		timer3: timer@400c4000 {
 			compatible = "nxp,lpc3220-timer";
 			reg = <0x400c4000 0x1000>;
 			interrupts = <15>;
-			clocks = <&pll1>;
+			clocks = <&ccu1 CLK_CPU_TIMER3>;
 			clock-names = "timerclk";
+			resets = <&rgu 35>;
+		};
+
+		ssp1: spi@400c5000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x400c5000 0x1000>;
+			interrupts = <23>;
+			clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 51>;
+			dmas = <&dmamux 11 2 2
+				&dmamux 12 2 2
+				&dmamux  3 3 2
+				&dmamux  4 3 2
+				&dmamux  5 2 2
+				&dmamux  6 2 2
+				&dmamux 13 2 2
+				&dmamux 14 2 2>;
+			dma-names = "rx", "tx", "tx", "rx",
+				    "tx", "rx", "rx", "tx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@400e0000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400e0000 0x1000>;
+			interrupts = <19>;
+			clocks = <&ccu1 CLK_APB3_I2C1>;
+			resets = <&rgu 49>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dac: dac@400e1000 {
+			compatible = "nxp,lpc1850-dac";
+			reg = <0x400e1000 0x1000>;
+			interrupts = <0>;
+			clocks = <&ccu1 CLK_APB3_DAC>;
+			resets = <&rgu 42>;
+			status = "disabled";
+		};
+
+		can0: can@400e2000 {
+			compatible = "bosch,c_can";
+			reg = <0x400e2000 0x1000>;
+			interrupts = <51>;
+			clocks = <&ccu1 CLK_APB3_CAN0>;
+			resets = <&rgu 55>;
+			status = "disabled";
+		};
+
+		adc0: adc@400e3000 {
+			compatible = "nxp,lpc1850-adc";
+			reg = <0x400e3000 0x1000>;
+			interrupts = <17>;
+			clocks = <&ccu1 CLK_APB3_ADC0>;
+			resets = <&rgu 40>;
+			status = "disabled";
+		};
+
+		adc1: adc@400e4000 {
+			compatible = "nxp,lpc1850-adc";
+			reg = <0x400e4000 0x1000>;
+			interrupts = <21>;
+			clocks = <&ccu1 CLK_APB3_ADC1>;
+			resets = <&rgu 41>;
+			status = "disabled";
+		};
+
+		gpio: gpio@400f4000 {
+			compatible = "nxp,lpc1850-gpio";
+			reg = <0x400f4000 0x4000>;
+			clocks = <&ccu1 CLK_CPU_GPIO>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
+					<&pinctrl LPC_GPIO(0,4)  LPC_PIN(1,0)  1>,
+					<&pinctrl LPC_GPIO(0,8)  LPC_PIN(1,1)  4>,
+					<&pinctrl LPC_GPIO(1,8)  LPC_PIN(1,5)  2>,
+					<&pinctrl LPC_GPIO(1,0)  LPC_PIN(1,7)  8>,
+					<&pinctrl LPC_GPIO(0,2)  LPC_PIN(1,15) 2>,
+					<&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>,
+					<&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>,
+					<&pinctrl LPC_GPIO(5,0)  LPC_PIN(2,0)  7>,
+					<&pinctrl LPC_GPIO(0,7)  LPC_PIN(2,7)  1>,
+					<&pinctrl LPC_GPIO(5,7)  LPC_PIN(2,8)  1>,
+					<&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9)  1>,
+					<&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>,
+					<&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>,
+					<&pinctrl LPC_GPIO(5,8)  LPC_PIN(3,1)  2>,
+					<&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4)  2>,
+					<&pinctrl LPC_GPIO(0,6)  LPC_PIN(3,6)  1>,
+					<&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7)  2>,
+					<&pinctrl LPC_GPIO(2,0)  LPC_PIN(4,0)  7>,
+					<&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8)  3>,
+					<&pinctrl LPC_GPIO(2,9)  LPC_PIN(5,0)  7>,
+					<&pinctrl LPC_GPIO(2,7)  LPC_PIN(5,7)  1>,
+					<&pinctrl LPC_GPIO(3,0)  LPC_PIN(6,1)  5>,
+					<&pinctrl LPC_GPIO(0,5)  LPC_PIN(6,6)  1>,
+					<&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7)  2>,
+					<&pinctrl LPC_GPIO(3,5)  LPC_PIN(6,9)  3>,
+					<&pinctrl LPC_GPIO(2,8)  LPC_PIN(6,12) 1>,
+					<&pinctrl LPC_GPIO(3,8)  LPC_PIN(7,0)  8>,
+					<&pinctrl LPC_GPIO(4,0)  LPC_PIN(8,0)  8>,
+					<&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0)  4>,
+					<&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4)  2>,
+					<&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6)  1>,
+					<&pinctrl LPC_GPIO(4,8)  LPC_PIN(a,1)  3>,
+					<&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4)  1>,
+					<&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0)  7>,
+					<&pinctrl LPC_GPIO(6,0)  LPC_PIN(c,1) 14>,
+					<&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>,
+					<&pinctrl LPC_GPIO(7,0)  LPC_PIN(e,0) 16>,
+					<&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1)  3>,
+					<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts
index a4ba31b23..52b3ed102 100644
--- a/arch/arm/boot/dts/ea3250.dts
+++ b/arch/arm/boot/dts/lpc3250-ea3250.dts
@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "lpc32xx.dtsi"
+#include "lpc32xx.dtsi"
 
 / {
 	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
@@ -22,142 +22,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x4000000>;
-	};
-
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		/* Here, choose exactly one from: ohci, usbd */
-		ohci@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-
-/*
-		usbd@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-*/
-
-		/* 128MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <260000000>;
-			nxp,whold = <104000000>;
-			nxp,wsetup = <200000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <34666666>;
-			nxp,rhold = <104000000>;
-			nxp,rsetup = <200000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "ea3250-boot";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-
-			mtd1@00080000 {
-				label = "ea3250-uboot";
-				reg = <0x00080000 0x000c0000>;
-				read-only;
-			};
-
-			mtd2@00140000 {
-				label = "ea3250-kernel";
-				reg = <0x00140000 0x00400000>;
-			};
-
-			mtd3@00540000 {
-				label = "ea3250-rootfs";
-				reg = <0x00540000 0x07ac0000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			uart6: serial@40098000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				eeprom@50 {
-					compatible = "at,24c256";
-					reg = <0x50>;
-				};
-
-				eeprom@57 {
-					compatible = "at,24c64";
-					reg = <0x57>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-
-				pca9532: pca9532@60 {
-					compatible = "nxp,pca9532";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x60>;
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			i2cusb: i2c@31020300 {
-				clock-frequency = <100000>;
-
-				isp1301: usb-transceiver@2d {
-					compatible = "nxp,isp1301";
-					reg = <0x2d>;
-				};
-			};
-
-			sd@20098000 {
-				wp-gpios = <&pca9532 5 0>;
-				cd-gpios = <&pca9532 4 0>;
-				cd-inverted;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart1: serial@40014000 {
-				status = "okay";
-			};
-
-			/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
-			adc@40048000 {
-				status = "okay";
-			};
-		};
+		reg = <0x80000000 0x4000000>;
 	};
 
 	gpio_keys {
@@ -279,3 +144,129 @@
 		};
 	};
 };
+
+/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+&adc {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	uda1380: uda1380@18 {
+		compatible = "nxp,uda1380";
+		reg = <0x18>;
+		power-gpio = <&gpio 0x59 0>;
+		reset-gpio = <&gpio 0x51 0>;
+		dac-clk = "wspll";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+
+	pca9532: pca9532@60 {
+		compatible = "nxp,pca9532";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2cusb {
+	clock-frequency = <100000>;
+
+	isp1301: usb-transceiver@2d {
+		compatible = "nxp,isp1301";
+		reg = <0x2d>;
+	};
+};
+
+&mac {
+	phy-mode = "rmii";
+	use-iram;
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&sd {
+	wp-gpios = <&pca9532 5 0>;
+	cd-gpios = <&pca9532 4 0>;
+	cd-inverted;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* 128MB Flash via SLC NAND controller */
+&slc {
+	status = "okay";
+
+	nxp,wdr-clks = <14>;
+	nxp,wwidth = <260000000>;
+	nxp,whold = <104000000>;
+	nxp,wsetup = <200000000>;
+	nxp,rdr-clks = <14>;
+	nxp,rwidth = <34666666>;
+	nxp,rhold = <104000000>;
+	nxp,rsetup = <200000000>;
+	nand-on-flash-bbt;
+	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mtd0@00000000 {
+			label = "ea3250-boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		mtd1@00080000 {
+			label = "ea3250-uboot";
+			reg = <0x00080000 0x000c0000>;
+			read-only;
+		};
+
+		mtd2@00140000 {
+			label = "ea3250-kernel";
+			reg = <0x00140000 0x00400000>;
+		};
+
+		mtd3@00540000 {
+			label = "ea3250-rootfs";
+			reg = <0x00540000 0x07ac0000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
new file mode 100644
index 000000000..fd95e2b10
--- /dev/null
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -0,0 +1,226 @@
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+	compatible = "phytec,phy3250", "nxp,lpc3250";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>;
+	};
+
+	regulators {
+		backlight_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "backlight_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 4 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		lcd_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "lcd_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 0 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		sd_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "sd_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 5 0>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 { /* red */
+			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
+			default-state = "off";
+		};
+
+		led1 { /* green */
+			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&clcd {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	uda1380: uda1380@18 {
+		compatible = "nxp,uda1380";
+		reg = <0x18>;
+		power-gpio = <&gpio 0x59 0>;
+		reset-gpio = <&gpio 0x51 0>;
+		dac-clk = "wspll";
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2cusb {
+	clock-frequency = <100000>;
+
+	isp1301: usb-transceiver@2c {
+		compatible = "nxp,isp1301";
+		reg = <0x2c>;
+	};
+};
+
+&key {
+	keypad,num-rows = <1>;
+	keypad,num-columns = <1>;
+	nxp,debounce-delay-ms = <3>;
+	nxp,scan-delay-ms = <34>;
+	linux,keymap = <0x00000002>;
+	status = "okay";
+};
+
+&mac {
+	phy-mode = "rmii";
+	use-iram;
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&sd {
+	wp-gpios = <&gpio 3 0 0>;
+	cd-gpios = <&gpio 3 1 0>;
+	cd-inverted;
+	bus-width = <4>;
+	vmmc-supply = <&sd_reg>;
+	status = "okay";
+};
+
+/* 64MB Flash via SLC NAND controller */
+&slc {
+	status = "okay";
+
+	nxp,wdr-clks = <14>;
+	nxp,wwidth = <40000000>;
+	nxp,whold = <100000000>;
+	nxp,wsetup = <100000000>;
+	nxp,rdr-clks = <14>;
+	nxp,rwidth = <40000000>;
+	nxp,rhold = <66666666>;
+	nxp,rsetup = <100000000>;
+	nand-on-flash-bbt;
+	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mtd0@00000000 {
+			label = "phy3250-boot";
+			reg = <0x00000000 0x00064000>;
+			read-only;
+		};
+
+		mtd1@00064000 {
+			label = "phy3250-uboot";
+			reg = <0x00064000 0x00190000>;
+			read-only;
+		};
+
+		mtd2@001f4000 {
+			label = "phy3250-ubt-prms";
+			reg = <0x001f4000 0x00010000>;
+		};
+
+		mtd3@00204000 {
+			label = "phy3250-kernel";
+			reg = <0x00204000 0x00400000>;
+		};
+
+		mtd4@00604000 {
+			label = "phy3250-rootfs";
+			reg = <0x00604000 0x039fc000>;
+		};
+	};
+};
+
+&ssp0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	num-cs = <1>;
+	cs-gpios = <&gpio 3 5 0>;
+	status = "okay";
+
+	eeprom: at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+
+		pl022,interface = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+
+		at25,byte-len = <0x8000>;
+		at25,addr-mode = <2>;
+		at25,page-size = <64>;
+	};
+};
+
+&tsc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3abebb75f..e295e1ec8 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -11,19 +11,39 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/lpc32xx-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "nxp,lpc3220";
 	interrupt-parent = <&mic>;
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		xtal_32k: xtal_32k {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "xtal_32k";
+		};
+
+		xtal: xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <13000000>;
+			clock-output-names = "xtal";
 		};
 	};
 
@@ -31,7 +51,8 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		ranges = <0x20000000 0x20000000 0x30000000>;
+		ranges = <0x20000000 0x20000000 0x30000000>,
+			 <0xe0000000 0xe0000000 0x04000000>;
 
 		/*
 		 * Enable either SLC or MLC
@@ -39,50 +60,103 @@
 		slc: flash@20020000 {
 			compatible = "nxp,lpc3220-slc";
 			reg = <0x20020000 0x1000>;
+			clocks = <&clk LPC32XX_CLK_SLC>;
 			status = "disabled";
 		};
 
 		mlc: flash@200a8000 {
 			compatible = "nxp,lpc3220-mlc";
 			reg = <0x200a8000 0x11000>;
-			interrupts = <11 0>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_MLC>;
 			status = "disabled";
 		};
 
-		dma@31000000 {
+		dma: dma@31000000 {
 			compatible = "arm,pl080", "arm,primecell";
 			reg = <0x31000000 0x1000>;
-			interrupts = <0x1c 0>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_DMA>;
+			clock-names = "apb_pclk";
 		};
 
-		/*
-		 * Enable either ohci or usbd (gadget)!
-		 */
-		ohci@31020000 {
-			compatible = "nxp,ohci-nxp", "usb-ohci";
-			reg = <0x31020000 0x300>;
-			interrupts = <0x3b 0>;
-			status = "disabled";
-		};
+		usb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x31020000 0x00001000>;
 
-		usbd@31020000 {
-			compatible = "nxp,lpc3220-udc";
-			reg = <0x31020000 0x300>;
-			interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
-			status = "disabled";
+			/*
+			 * Enable either ohci or usbd (gadget)!
+			 */
+			ohci: ohci@0 {
+				compatible = "nxp,ohci-nxp", "usb-ohci";
+				reg = <0x0 0x300>;
+				interrupt-parent = <&sic1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
+				status = "disabled";
+			};
+
+			usbd: usbd@0 {
+				compatible = "nxp,lpc3220-udc";
+				reg = <0x0 0x300>;
+				interrupt-parent = <&sic1>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
+					     <30 IRQ_TYPE_LEVEL_HIGH>,
+					     <28 IRQ_TYPE_LEVEL_HIGH>,
+					     <26 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
+				status = "disabled";
+			};
+
+			i2cusb: i2c@300 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x300 0x100>;
+				interrupt-parent = <&sic1>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			usbclk: clock-controller@f00 {
+				compatible = "nxp,lpc3220-usb-clk";
+				reg = <0xf00 0x100>;
+				#clock-cells = <1>;
+			};
 		};
 
-		clcd@31040000 {
+		clcd: clcd@31040000 {
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0x31040000 0x1000>;
-			interrupts = <0x0e 0>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_LCD>;
+			clock-names = "apb_pclk";
 			status = "disabled";
 		};
 
 		mac: ethernet@31060000 {
 			compatible = "nxp,lpc-eth";
 			reg = <0x31060000 0x1000>;
-			interrupts = <0x1d 0>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_MAC>;
+		};
+
+		emc: memory-controller@31080000 {
+			compatible = "arm,pl175", "arm,primecell";
+			reg = <0x31080000 0x1000>;
+			clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
+			clock-names = "mpmcclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe0000000 0x01000000>,
+				 <1 0xe1000000 0x01000000>,
+				 <2 0xe2000000 0x01000000>,
+				 <3 0xe3000000 0x01000000>;
+			status = "disabled";
 		};
 
 		apb {
@@ -91,26 +165,44 @@
 			compatible = "simple-bus";
 			ranges = <0x20000000 0x20000000 0x30000000>;
 
+			/*
+			 * ssp0 and spi1 are shared pins;
+			 * enable one in your board dts, as needed.
+			 */
 			ssp0: ssp@20084000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x20084000 0x1000>;
-				interrupts = <0x14 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SSP0>;
+				clock-names = "apb_pclk";
+				status = "disabled";
 			};
 
 			spi1: spi@20088000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20088000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_SPI1>;
+				status = "disabled";
 			};
 
+			/*
+			 * ssp1 and spi2 are shared pins;
+			 * enable one in your board dts, as needed.
+			 */
 			ssp1: ssp@2008c000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x2008c000 0x1000>;
-				interrupts = <0x15 0>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SSP1>;
+				clock-names = "apb_pclk";
+				status = "disabled";
 			};
 
 			spi2: spi@20090000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20090000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_SPI2>;
+				status = "disabled";
 			};
 
 			i2s0: i2s@20094000 {
@@ -118,10 +210,13 @@
 				reg = <0x20094000 0x1000>;
 			};
 
-			sd@20098000 {
+			sd: sd@20098000 {
 				compatible = "arm,pl18x", "arm,primecell";
 				reg = <0x20098000 0x1000>;
-				interrupts = <0x0f 0>, <0x0d 0>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SD>;
+				clock-names = "apb_pclk";
 				status = "disabled";
 			};
 
@@ -135,55 +230,59 @@
 				/* actually, ns16550a w/ 64 byte fifos! */
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40090000 0x1000>;
-				interrupts = <9 0>;
-				clock-frequency = <13000000>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART5>;
 				status = "disabled";
 			};
 
 			uart3: serial@40080000 {
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40080000 0x1000>;
-				interrupts = <7 0>;
-				clock-frequency = <13000000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART3>;
 				status = "disabled";
 			};
 
 			uart4: serial@40088000 {
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40088000 0x1000>;
-				interrupts = <8 0>;
-				clock-frequency = <13000000>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART4>;
 				status = "disabled";
 			};
 
 			uart6: serial@40098000 {
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40098000 0x1000>;
-				interrupts = <10 0>;
-				clock-frequency = <13000000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART6>;
 				status = "disabled";
 			};
 
 			i2c1: i2c@400A0000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A0000 0x100>;
-				interrupts = <0x33 0>;
+				interrupt-parent = <&sic1>;
+				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pnx,timeout = <0x64>;
+				clocks = <&clk LPC32XX_CLK_I2C1>;
 			};
 
 			i2c2: i2c@400A8000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A8000 0x100>;
-				interrupts = <0x32 0>;
+				interrupt-parent = <&sic1>;
+				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pnx,timeout = <0x64>;
+				clocks = <&clk LPC32XX_CLK_I2C2>;
 			};
 
 			mpwm: mpwm@400E8000 {
@@ -192,15 +291,6 @@
 				status = "disabled";
 				#pwm-cells = <2>;
 			};
-
-			i2cusb: i2c@31020300 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x31020300 0x100>;
-				interrupts = <0x3f 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pnx,timeout = <0x64>;
-			};
 		};
 
 		fab {
@@ -209,44 +299,82 @@
 			compatible = "simple-bus";
 			ranges = <0x20000000 0x20000000 0x30000000>;
 
-			/*
-			 * MIC Interrupt controller includes:
-			 *   MIC @40008000
-			 *   SIC1 @4000C000
-			 *   SIC2 @40010000
-			 */
+			/* System Control Block */
+			scb {
+				compatible = "simple-bus";
+				ranges = <0x0 0x040004000 0x00001000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				clk: clock-controller@0 {
+					compatible = "nxp,lpc3220-clk";
+					reg = <0x00 0x114>;
+					#clock-cells = <1>;
+
+					clocks = <&xtal_32k>, <&xtal>;
+					clock-names = "xtal_32k", "xtal";
+
+					assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
+					assigned-clock-rates = <208000000>;
+				};
+			};
+
 			mic: interrupt-controller@40008000 {
 				compatible = "nxp,lpc3220-mic";
+				reg = <0x40008000 0x4000>;
 				interrupt-controller;
-				reg = <0x40008000 0xC000>;
 				#interrupt-cells = <2>;
 			};
 
+			sic1: interrupt-controller@4000c000 {
+				compatible = "nxp,lpc3220-sic";
+				reg = <0x4000c000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&mic>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+					     <30 IRQ_TYPE_LEVEL_LOW>;
+				};
+
+			sic2: interrupt-controller@40010000 {
+				compatible = "nxp,lpc3220-sic";
+				reg = <0x40010000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&mic>;
+				interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
+					     <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+
 			uart1: serial@40014000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x40014000 0x1000>;
-				interrupts = <26 0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			uart2: serial@40018000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x40018000 0x1000>;
-				interrupts = <25 0>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			uart7: serial@4001c000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x4001c000 0x1000>;
-				interrupts = <24 0>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
-			rtc@40024000 {
+			rtc: rtc@40024000 {
 				compatible = "nxp,lpc3220-rtc";
 				reg = <0x40024000 0x1000>;
-				interrupts = <0x34 0>;
+				interrupt-parent = <&sic1>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_RTC>;
 			};
 
 			gpio: gpio@40028000 {
@@ -256,9 +384,36 @@
 				#gpio-cells = <3>; /* bank, pin, flags */
 			};
 
-			watchdog@4003C000 {
+			timer4: timer@4002C000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x4002C000 0x1000>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER4>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			timer5: timer@40030000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40030000 0x1000>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER5>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			watchdog: watchdog@4003C000 {
 				compatible = "nxp,pnx4008-wdt";
 				reg = <0x4003C000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_WDOG>;
+			};
+
+			timer0: timer@40044000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40044000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_TIMER0>;
+				clock-names = "timerclk";
+				interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 			};
 
 			/*
@@ -268,30 +423,68 @@
 			 * them
 			 */
 
-			adc@40048000 {
+			adc: adc@40048000 {
 				compatible = "nxp,lpc3220-adc";
 				reg = <0x40048000 0x1000>;
-				interrupts = <0x27 0>;
+				interrupt-parent = <&sic1>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_ADC>;
 				status = "disabled";
 			};
 
-			tsc@40048000 {
+			tsc: tsc@40048000 {
 				compatible = "nxp,lpc3220-tsc";
 				reg = <0x40048000 0x1000>;
-				interrupts = <0x27 0>;
+				interrupt-parent = <&sic1>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_ADC>;
 				status = "disabled";
 			};
 
-			key@40050000 {
+			timer1: timer@4004C000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x4004C000 0x1000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER1>;
+				clock-names = "timerclk";
+			};
+
+			key: key@40050000 {
 				compatible = "nxp,lpc3220-key";
 				reg = <0x40050000 0x1000>;
-				interrupts = <54 0>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
-			pwm: pwm@4005C000 {
+			timer2: timer@40058000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40058000 0x1000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER2>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			pwm1: pwm@4005C000 {
+				compatible = "nxp,lpc3220-pwm";
+				reg = <0x4005C000 0x4>;
+				clocks = <&clk LPC32XX_CLK_PWM1>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@4005C004 {
 				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005C000 0x8>;
+				reg = <0x4005C004 0x4>;
+				clocks = <&clk LPC32XX_CLK_PWM2>;
+				status = "disabled";
+			};
+
+			timer3: timer@40060000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40060000 0x1000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER3>;
+				clock-names = "timerclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
new file mode 100644
index 000000000..5cfadb06c
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4337-ciaa.dts
@@ -0,0 +1,221 @@
+/*
+ * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar)
+ *
+ * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+	model = "CIAA NXP LPC4337";
+	compatible = "ciaa,lpc4337", "nxp,lpc4337", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart2;
+		serial1 = &uart3;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x28000000 0x0800000>; /* 8 MB */
+	};
+};
+
+&pinctrl {
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "p7_7";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	ssp_pins: ssp-pins {
+		ssp1_cs {
+			pins = "p6_7";
+			function = "gpio";
+			bias-pull-up;
+			bias-disable;
+		};
+
+		ssp1_miso_mosi {
+			pins = "p1_3", "p1_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		ssp1_sck {
+			pins = "pf_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-disable;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		uart2_rx_cfg {
+			pins = "p7_2";
+			function = "uart2";
+			bias-disable;
+			input-enable;
+		};
+
+		uart2_tx_cfg {
+			pins = "p7_1";
+			function = "uart2";
+			bias-disable;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			bias-disable;
+			input-enable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p2_3";
+			function = "uart3";
+			bias-disable;
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "microchip,24c512";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "microchip,24c02";
+		reg = <0x51>;
+	};
+
+	eeprom@54 {
+		compatible = "microchip,24c512";
+		reg = <0x54>;
+	};
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&sct_pwm {
+	status = "okay";
+};
+
+&ssp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp_pins>;
+	cs-gpios = <&gpio LPC_GPIO(5,15) GPIO_ACTIVE_HIGH>;
+	num-cs = <1>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index d04072f40..6c9048d4d 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -15,6 +15,9 @@
 #include "lpc18xx.dtsi"
 #include "lpc4350.dtsi"
 
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
 / {
 	model = "Hitex LPC4350 Evaluation Board";
 	compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
@@ -34,12 +37,447 @@
 		device_type = "memory";
 		reg = <0x28000000 0x800000>; /* 8 MB */
 	};
+
+	pca_buttons {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		autorepeat;
+
+		button0 {
+			label = "joy:right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		button1 {
+			label = "joy:up";
+			linux,code = <KEY_UP>;
+			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+
+		button2 {
+			label = "joy:enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "joy:left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button4 {
+			label = "joy:down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		button5 {
+			label = "user:sw3";
+			linux,code = <KEY_F1>;
+			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		button6 {
+			label = "user:sw4";
+			linux,code = <KEY_F2>;
+			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button7 {
+			label = "user:sw5";
+			linux,code = <KEY_F3>;
+			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pca_leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "ext:led0";
+			gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "ext:led1";
+			gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			label = "ext:led2";
+			gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "ext:led3";
+			gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc: vcc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&pinctrl {
+	adc1_pins: adc1-pins {
+		adc1_pins_cfg {
+			pins = "pf_9";
+			function = "adc";
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	emc_pins: emc-pins {
+		emc_addr0_23_cfg {
+			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
+				"p2_13", "p1_0",  "p1_1",  "p1_2",
+				"p2_8",  "p2_7",  "p2_6",  "p2_2",
+				"p2_1",  "p2_0",  "p6_8",  "p6_7",
+				"pd_16", "pd_15", "pe_0",  "pe_1",
+				"pe_2",  "pe_3",  "pe_4",  "pa_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_data0_15_cfg {
+			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
+				"p1_11", "p1_12", "p1_13", "p1_14",
+				"p5_4",  "p5_5",  "p5_6",  "p5_7",
+				"p5_0",  "p5_1",  "p5_2",  "p5_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_bls0_3_cfg {
+			pins = "p1_4", "p6_6", "pd_13", "pd_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_cs0_cs2_cfg {
+			pins = "p1_5", "pd_12";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dqm0_3_cfg {
+			pins = "p6_12", "p6_10", "pd_0", "pe_13";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0", "clk1", "clk2", "clk3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	enet_mii_pins: enet-mii-pins {
+		enet_mii_rxd0_3_cfg {
+			pins = "p1_15", "p0_0", "p9_3", "p9_2";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_txd0_3_cfg {
+			pins = "p1_18", "p1_20", "p9_4", "p9_5";
+			function = "enet";
+			bias-disable;
+		};
+
+		enet_mii_crs_col_cfg {
+			pins = "p9_0", "p9_6";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_rx_clk_dv_er_cfg {
+			pins = "pc_0", "p1_16", "p9_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_tx_clk_en_cfg {
+			pins = "p1_19", "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			bias-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&vcc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_pins>;
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		flash@0,0 {
+			compatible = "sst,sst39vf320", "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x000000 0x040000>; /* 256 KiB */
+			};
+
+			partition@1 {
+				label = "kernel";
+				reg = <0x040000 0x2C0000>; /* 2.75 MiB */
+			};
+
+			partition@2 {
+				label = "rootfs";
+				reg = <0x300000 0x100000>; /* 1 MiB */
+			};
+		};
+	};
+
+	cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <2>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <30>;
+		mpmc,read-access-delay = <90>;
+		mpmc,page-mode-read-delay = <55>;
+		mpmc,write-access-delay = <55>;
+		mpmc,turn-round-delay = <55>;
+
+		ext_sram: sram@2,0 {
+			compatible = "mmio-sram";
+			reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <25000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	sensor@18 {
+		compatible = "nxp,jc42";
+		reg = <0x18>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,24c02";
+		reg = <0x50>;
+	};
+
+	pca_gpio: gpio@24 {
+		compatible = "nxp,pca9673";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "mii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_mii_pins>;
 };
 
-&pll1 {
-	clock-mult = <15>;
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash {
+		compatible = "jedec,spi-nor";
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x000000 0x040000>; /* 256 KiB */
+		};
+
+		partition@1 {
+			label = "kernel";
+			reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+		};
+
+		partition@2 {
+			label = "rootfs";
+			reg = <0x300000 0x500000>; /* 5 MiB */
+		};
+	};
 };
 
 &uart0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
 };
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 08a6f757f..1919be4da 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -15,6 +15,9 @@
 #include "lpc18xx.dtsi"
 #include "lpc4357.dtsi"
 
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
 / {
 	model = "Embedded Artists' LPC4357 Developer's Kit";
 	compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
@@ -34,8 +37,589 @@
 		device_type = "memory";
 		reg = <0x28000000 0x2000000>; /* 32 MB */
 	};
+
+	vcc: vcc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* vmmc is controlled by sdmmc host internally */
+	vmmc: vmmc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	gpio_joystick {
+		compatible = "gpio-keys-polled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_joystick_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		autorepeat;
+
+		button0 {
+			label = "joy_enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+		};
+
+		button1 {
+			label = "joy_left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
+		};
+
+		button2 {
+			label = "joy_up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "joy_right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
+		};
+
+		button4 {
+			label = "joy_down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds_mmio {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&mmio_leds 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			gpios = <&mmio_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			gpios = <&mmio_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4 {
+			gpios = <&mmio_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5 {
+			gpios = <&mmio_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led6 {
+			gpios = <&mmio_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led7 {
+			gpios = <&mmio_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led8 {
+			gpios = <&mmio_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led9 {
+			gpios = <&mmio_leds 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led10 {
+			gpios = <&mmio_leds 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led11 {
+			gpios = <&mmio_leds 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led12 {
+			gpios = <&mmio_leds 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led13 {
+			gpios = <&mmio_leds 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led14 {
+			gpios = <&mmio_leds 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led15 {
+			gpios = <&mmio_leds 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led16 {
+			gpios = <&mmio_leds 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	emc_pins: emc-pins {
+		emc_addr0_23_cfg {
+			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
+				"p2_13", "p1_0",  "p1_1",  "p1_2",
+				"p2_8",  "p2_7",  "p2_6",  "p2_2",
+				"p2_1",  "p2_0",  "p6_8",  "p6_7",
+				"pd_16", "pd_15", "pe_0",  "pe_1",
+				"pe_2",  "pe_3",  "pe_4",  "pa_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_data0_31_cfg {
+			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
+				"p1_11", "p1_12", "p1_13", "p1_14",
+				"p5_4",  "p5_5",  "p5_6",  "p5_7",
+				"p5_0",  "p5_1",  "p5_2",  "p5_3",
+				"pd_2",  "pd_3",  "pd_4",  "pd_5",
+				"pd_6",  "pd_7",  "pd_8",  "pd_9",
+				"pe_5",  "pe_6",  "pe_7",  "pe_8",
+				"pe_9",  "pe_10", "pe_11", "pe_12";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_bls0_3_cfg {
+			pins = "p1_4", "p6_6", "pd_13", "pd_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_cs0_3_cfg {
+			pins = "p1_5", "p6_3", "pd_12", "pd_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dqm0_3_cfg {
+			pins = "p6_12", "p6_10", "pd_0", "pe_13";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0", "clk1", "clk2", "clk3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	gpio_joystick_pins: gpio-joystick-pins {
+		gpio_joystick_cfg {
+			pins =	"p9_0", "p9_1", "pa_1", "pa_2", "pa_3";
+			function = "gpio";
+			input-enable;
+			bias-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	sdmmc_pins: sdmmc-pins {
+		sdmmc_clk_cfg {
+			pins = "pc_0";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		sdmmc_cmd_dat0_3_cfg {
+			pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		sdmmc_cd_cfg {
+			pins = "pc_8";
+			function = "sdmmc";
+			bias-pull-down;
+			input-enable;
+		};
+
+		sdmmc_pow_cfg {
+			pins = "pc_9";
+			function = "sdmmc";
+			bias-pull-down;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <0>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			bias-disable;
+		};
+	};
+
+	ssp0_pins: ssp0-pins {
+		ssp0_sck_miso_mosi {
+			pins = "pf_0", "pf_2", "pf_3";
+			function = "ssp0";
+			slew-rate = <1>;
+			bias-pull-down;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		ssp0_ssel {
+			pins = "pf_1";
+			function = "ssp0";
+			bias-pull-up;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p9_3";
+			function = "uart3";
+			bias-pull-down;
+		};
+	};
+
+	usb0_pins: usb0-pins {
+		usb0_pwr_enable {
+			pins = "p2_3";
+			function = "usb0";
+		};
+
+		usb0_pwr_fault {
+			pins = "p8_0";
+			function = "usb0";
+			bias-disable;
+			input-enable;
+		};
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&vcc>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	mma7455@1d {
+		compatible = "fsl,mma7455";
+		reg = <0x1d>;
+	};
+
+	lm75@48 {
+		compatible = "nxp,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@57 {
+		compatible = "microchip,24c64";
+		reg = <0x57>;
+	};
+};
+
+&dac {
+	status = "okay";
+	vref-supply = <&vcc>;
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		flash@0,0 {
+			compatible = "sst,sst39vf320", "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x000000 0x040000>; /* 256 KiB */
+			};
+
+			partition@1 {
+				label = "kernel";
+				reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+			};
+
+			partition@2 {
+				label = "rootfs";
+				reg = <0x300000 0x100000>; /* 1 MiB */
+			};
+		};
+	};
+
+	cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <2>;
+		mpmc,memory-width = <16>;
+
+		mmio_leds: gpio@2,0 {
+			compatible = "ti,7416374";
+			reg = <2 0 0x2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&mmcsd {
+	status = "okay";
+	bus-width = <4>;
+	vmmc-supply = <&vmmc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_pins>;
+};
+
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash {
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "data";
+			reg = <0 0x200000>;
+		};
+	};
+};
+
+&ssp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp0_pins>;
+	num-cs = <1>;
 };
 
 &uart0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
 };
diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi
index fb9ecc754..72f12db8d 100644
--- a/arch/arm/boot/dts/lpc4357.dtsi
+++ b/arch/arm/boot/dts/lpc4357.dtsi
@@ -37,3 +37,7 @@
 		};
 	};
 };
+
+&eeprom {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 9c5e16ba8..940875316 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -58,6 +58,55 @@
 		enet0_sgmii_phy = &sgmii_phy1c;
 		enet1_sgmii_phy = &sgmii_phy1d;
 	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
 };
 
 &dspi0 {
@@ -75,10 +124,31 @@
 	};
 };
 
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1c>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1d>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy3>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
 	pca9547: mux@77 {
+		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -133,6 +203,21 @@
 				reg = <0x4c>;
 			};
 		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			codec: sgtl5000@2a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0x2a>;
+				VDDA-supply = <&reg_3p3v>;
+				VDDIO-supply = <&reg_3p3v>;
+				clocks = <&sys_mclk 1>;
+			};
+		};
 	};
 };
 
@@ -231,6 +316,14 @@
 	};
 };
 
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index a2c591e2d..75ecaed32 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -56,6 +56,64 @@
 		enet0_sgmii_phy = &sgmii_phy2;
 		enet1_sgmii_phy = &sgmii_phy0;
 	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	panel: panel {
+		compatible = "nec,nl4827hc19-05b";
+	};
+};
+
+&dcu {
+	fsl,panel = <&panel>;
+	status = "okay";
 };
 
 &dspi1 {
@@ -73,12 +131,53 @@
 	};
 };
 
+&enet0 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	ina220@41 {
+		compatible = "ti,ina220";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
 };
 
 &i2c1 {
 	status = "okay";
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&sys_mclk 1>;
+	};
 };
 
 &ifc {
@@ -118,6 +217,14 @@
 	};
 };
 
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27ac..368e21934 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -53,6 +53,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		crypto = &crypto;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
 		serial0 = &lpuart0;
 		serial1 = &lpuart1;
 		serial2 = &lpuart2;
@@ -115,6 +119,20 @@
 
 		};
 
+		msi1: msi-controller@1570e00 {
+			compatible = "fsl,1s1021a-msi";
+			reg = <0x0 0x1570e00 0x0 0x8>;
+			msi-controller;
+			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi2: msi-controller@1570e08 {
+			compatible = "fsl,1s1021a-msi";
+			reg = <0x0 0x1570e08 0x0 0x8>;
+			msi-controller;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		ifc: ifc@1530000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
@@ -139,12 +157,62 @@
 			status = "disabled";
 		};
 
+		sata: sata@3200000 {
+			compatible = "fsl,ls1021a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			      <0x0 0x20220520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		scfg: scfg@1570000 {
 			compatible = "fsl,ls1021a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
 			big-endian;
 		};
 
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <7>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg		 = <0x0 0x1700000 0x0 0x100000>;
+			ranges		 = <0x0 0x0 0x1700000 0x100000>;
+			interrupts	 = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+		};
+
 		clockgen: clocking@1ee1000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -184,27 +252,27 @@
 		};
 
 		dspi0: dspi@2100000 {
-			compatible = "fsl,vf610-dspi";
+			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&platform_clk 1>;
-			spi-num-chipselects = <5>;
+			spi-num-chipselects = <6>;
 			big-endian;
 			status = "disabled";
 		};
 
 		dspi1: dspi@2110000 {
-			compatible = "fsl,vf610-dspi";
+			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2110000 0x0 0x10000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&platform_clk 1>;
-			spi-num-chipselects = <5>;
+			spi-num-chipselects = <6>;
 			big-endian;
 			status = "disabled";
 		};
@@ -278,6 +346,46 @@
 			status = "disabled";
 		};
 
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		lpuart0: serial@2950000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2950000 0x0 0x1000>;
@@ -342,28 +450,30 @@
 		};
 
 		sai1: sai@2b50000 {
+			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b50000 0x0 0x10000>;
 			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&platform_clk 1>;
-			clock-names = "sai";
+			clocks = <&platform_clk 1>, <&platform_clk 1>,
+				 <&platform_clk 1>, <&platform_clk 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 47>,
 			       <&edma0 1 46>;
-			big-endian;
 			status = "disabled";
 		};
 
 		sai2: sai@2b60000 {
+			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b60000 0x0 0x10000>;
 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&platform_clk 1>;
-			clock-names = "sai";
+			clocks = <&platform_clk 1>, <&platform_clk 1>,
+				 <&platform_clk 1>, <&platform_clk 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 45>,
 			       <&edma0 1 44>;
-			big-endian;
 			status = "disabled";
 		};
 
@@ -383,6 +493,17 @@
 				 <&platform_clk 1>;
 		};
 
+		dcu: dcu@2ce0000 {
+			compatible = "fsl,ls1021a-dcu";
+			reg = <0x0 0x2ce0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 0>,
+				<&platform_clk 0>;
+			clock-names = "dcu", "pix";
+			big-endian;
+			status = "disabled";
+		};
+
 		mdio0: mdio@2d24000 {
 			compatible = "gianfar";
 			device_type = "mdio";
@@ -391,6 +512,106 @@
 			reg = <0x0 0x2d24000 0x0 0x4000>;
 		};
 
+		ptp_clock@2d10e00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0x0 0x2d10e00 0x0 0xb0>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tclk-period = <5>;
+			fsl,tmr-prsc    = <2>;
+			fsl,tmr-add     = <0xaaaaaaab>;
+			fsl,tmr-fiper1  = <999999990>;
+			fsl,tmr-fiper2  = <99990>;
+			fsl,max-adj     = <499999999>;
+		};
+
+		enet0: ethernet@2d10000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			fsl,magic-packet;
+			ranges;
+			dma-coherent;
+
+			queue-group@2d10000 {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d10000 0x0 0x1000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d14000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d14000 0x0 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		enet1: ethernet@2d50000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			ranges;
+			dma-coherent;
+
+			queue-group@2d50000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d50000 0x0 0x1000>;
+				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d54000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d54000 0x0 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		enet2: ethernet@2d90000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			ranges;
+			dma-coherent;
+
+			queue-group@2d90000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d90000 0x0 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d94000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d94000 0x0 0x1000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		usb@8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;
@@ -404,6 +625,54 @@
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
+			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			fsl,pcie-scfg = <&scfg 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
+			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,pcie-scfg = <&scfg 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 548441384..8c77c8766 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -67,7 +67,7 @@
 
 	timer@c1109940 {
 		compatible = "amlogic,meson6-timer";
-		reg = <0xc1109940 0x14>;
+		reg = <0xc1109940 0x18>;
 		interrupts = <0 10 1>;
 	};
 
@@ -80,36 +80,37 @@
 		wdt: watchdog@c1109900 {
 			compatible = "amlogic,meson6-wdt";
 			reg = <0xc1109900 0x8>;
+			interrupts = <0 0 1>;
 		};
 
 		uart_AO: serial@c81004c0 {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc81004c0 0x14>;
+			reg = <0xc81004c0 0x18>;
 			interrupts = <0 90 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
 
-		uart_A: serial@c81084c0 {
+		uart_A: serial@c11084c0 {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc81084c0 0x14>;
-			interrupts = <0 90 1>;
+			reg = <0xc11084c0 0x18>;
+			interrupts = <0 26 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
 
-		uart_B: serial@c81084dc {
+		uart_B: serial@c11084dc {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc81084dc 0x14>;
-			interrupts = <0 90 1>;
+			reg = <0xc11084dc 0x18>;
+			interrupts = <0 75 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
 
-		uart_C: serial@c8108700 {
+		uart_C: serial@c1108700 {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc8108700 0x14>;
-			interrupts = <0 90 1>;
+			reg = <0xc1108700 0x18>;
+			interrupts = <0 93 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
index 4f536bb1f..8bceb8d34 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -80,6 +80,7 @@
 	pmic@32 {
 		compatible = "ricoh,rn5t618";
 		reg = <0x32>;
+		system-power-controller;
 
 		regulators {
 		};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index a2ddcb8c5..45619f616 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -91,8 +91,8 @@
 		clock-frequency = <141666666>;
 	};
 
-	pinctrl: pinctrl@c1109880 {
-		compatible = "amlogic,meson8-pinctrl";
+	pinctrl_cbus: pinctrl@c1109880 {
+		compatible = "amlogic,meson8-cbus-pinctrl";
 		reg = <0xc1109880 0x10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -108,29 +108,6 @@
 			#gpio-cells = <2>;
 		};
 
-		gpio_ao: ao-bank@c1108030 {
-			reg = <0xc8100014 0x4>,
-			      <0xc810002c 0x4>,
-			      <0xc8100024 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		uart_ao_a_pins: uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a";
-				function = "uart_ao";
-			};
-		};
-
-		i2c_ao_pins: i2c_mst_ao {
-			mux {
-				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
-				function = "i2c_mst_ao";
-			};
-		};
-
 		spi_nor_pins: nor {
 			mux {
 				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -157,4 +134,34 @@
 		};
 	};
 
+	pinctrl_aobus: pinctrl@c8100084 {
+		compatible = "amlogic,meson8-aobus-pinctrl";
+		reg = <0xc8100084 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio_ao: ao-bank@c1108030 {
+			reg = <0xc8100014 0x4>,
+			      <0xc810002c 0x4>,
+			      <0xc8100024 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		i2c_ao_pins: i2c_mst_ao {
+			mux {
+				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+				function = "i2c_mst_ao";
+			};
+		};
+	};
 }; /* end of / */
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
new file mode 100644
index 000000000..c7fdaeabb
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+
+/ {
+	model = "TRONFY MXQ S805";
+	compatible = "tronfy,mxq", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
new file mode 100644
index 000000000..e50f1a1fd
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hardkernel ODROID-C1";
+	compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue {
+			label = "c1:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
new file mode 100644
index 000000000..fc4080de4
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -0,0 +1,207 @@
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+		};
+
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+		};
+
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		L2: l2-cache-controller@c4200000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xc4200000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xc4301000 0x1000>,
+			      <0xc4300100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		reset: reset-controller@c1104404 {
+			compatible = "amlogic,meson8b-reset";
+			reg = <0xc1104404 0x20>;
+			#reset-cells = <1>;
+		};
+
+		wdt: watchdog@c1109900 {
+			compatible = "amlogic,meson8b-wdt";
+			reg = <0xc1109900 0x8>;
+			interrupts = <0 0 1>;
+		};
+
+		timer@c1109940 {
+			compatible = "amlogic,meson6-timer";
+			reg = <0xc1109940 0x18>;
+			interrupts = <0 10 1>;
+		};
+
+		uart_AO: serial@c81004c0 {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc81004c0 0x18>;
+			interrupts = <0 90 1>;
+			clocks = <&clkc CLKID_CLK81>;
+			status = "disabled";
+		};
+
+		uart_A: serial@c11084c0 {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc11084c0 0x18>;
+			interrupts = <0 26 1>;
+			clocks = <&clkc CLKID_CLK81>;
+			status = "disabled";
+		};
+
+		uart_B: serial@c11084dc {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc11084dc 0x18>;
+			interrupts = <0 75 1>;
+			clocks = <&clkc CLKID_CLK81>;
+			status = "disabled";
+		};
+
+		uart_C: serial@c1108700 {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc1108700 0x18>;
+			interrupts = <0 93 1>;
+			clocks = <&clkc CLKID_CLK81>;
+			status = "disabled";
+		};
+
+		clkc: clock-controller@c1104000 {
+			#clock-cells = <1>;
+			compatible = "amlogic,meson8b-clkc";
+			reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
+		};
+
+		pinctrl_cbus: pinctrl@c1109880 {
+			compatible = "amlogic,meson8b-cbus-pinctrl";
+			reg = <0xc1109880 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio: banks@c11080b0 {
+				reg = <0xc11080b0 0x28>,
+				      <0xc11080e8 0x18>,
+				      <0xc1108120 0x18>,
+				      <0xc1108030 0x38>;
+				reg-names = "mux", "pull", "pull-enable", "gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		pinctrl_aobus: pinctrl@c8100084 {
+			compatible = "amlogic,meson8b-aobus-pinctrl";
+			reg = <0xc8100084 0xc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio_ao: ao-bank@c1108030 {
+				reg = <0xc8100014 0x4>,
+				      <0xc810002c 0x4>,
+				      <0xc8100024 0x8>;
+				reg-names = "mux", "pull", "gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			uart_ao_a_pins: uart_ao_a {
+				mux {
+					groups = "uart_tx_ao_a", "uart_rx_ao_a";
+					function = "uart_ao";
+				};
+			};
+		};
+	};
+}; /* end of / */
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index f0f5e1098..116ce78be 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -17,15 +17,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -61,7 +52,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/mps2-an385.dts
index 340406652..31c374d72 100644
--- a/arch/arm/boot/dts/rk3288-thermal.dtsi
+++ b/arch/arm/boot/dts/mps2-an385.dts
@@ -1,7 +1,7 @@
 /*
- * Device Tree Source for RK3288 SoC thermal
+ * Copyright (C) 2015 ARM Limited
  *
- * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,67 +42,51 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/thermal/thermal.h>
+/dts-v1/;
 
-reserve_thermal: reserve_thermal {
-	polling-delay-passive = <1000>; /* milliseconds */
-	polling-delay = <5000>; /* milliseconds */
+#include "mps2.dtsi"
 
-	thermal-sensors = <&tsadc 0>;
-};
+/ {
+	model = "ARM MPS2 Application Note 385/386";
+	compatible = "arm,mps2";
 
-cpu_thermal: cpu_thermal {
-	polling-delay-passive = <1000>; /* milliseconds */
-	polling-delay = <5000>; /* milliseconds */
+	aliases {
+		serial0 = &uart0;
+	};
 
-	thermal-sensors = <&tsadc 1>;
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:9600n8";
+	};
 
-	trips {
-		cpu_alert0: cpu_alert0 {
-			temperature = <70000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu_crit: cpu_crit {
-			temperature = <90000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "critical";
-		};
+	memory {
+		device_type = "memory";
+		reg = <0x21000000 0x1000000>;
 	};
 
-	cooling-maps {
-		map0 {
-			trip = <&cpu_alert0>;
-			cooling-device =
-				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	smb {
+		ethernet@0,0 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <0 0x0 0x10000>;
+			interrupts = <13>;
+			interrupt-parent = <&nvic>;
+			smsc,irq-active-high;
 		};
 	};
 };
 
-gpu_thermal: gpu_thermal {
-	polling-delay-passive = <1000>; /* milliseconds */
-	polling-delay = <5000>; /* milliseconds */
+&uart0 {
+	status = "okay";
+};
 
-	thermal-sensors = <&tsadc 2>;
+&timer0 {
+	status = "okay";
+};
 
-	trips {
-		gpu_alert0: gpu_alert0 {
-			temperature = <70000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "passive";
-		};
-		gpu_crit: gpu_crit {
-			temperature = <90000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "critical";
-		};
-	};
+&timer1 {
+	status = "okay";
+};
 
-	cooling-maps {
-		map0 {
-			trip = <&gpu_alert0>;
-			cooling-device =
-				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-	};
+&wdt {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/mps2-an399.dts
new file mode 100644
index 000000000..5e7e5ca2e
--- /dev/null
+++ b/arch/arm/boot/dts/mps2-an399.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "mps2.dtsi"
+
+/ {
+	model = "ARM MPS2 Application Note 399/400";
+	compatible = "arm,mps2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:9600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x1000000>;
+	};
+
+	smb {
+		ethernet@1,0 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <1 0x0 0x10000>;
+			interrupts = <13>;
+			interrupt-parent = <&nvic>;
+			smsc,irq-active-high;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&timer1 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
new file mode 100644
index 000000000..e3fed8d34
--- /dev/null
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+	oscclk0: clk-osc0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	oscclk1: clk-osc1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	oscclk2: clk-osc2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	cfgclk: clk-cfg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <5000000>;
+	};
+
+	spicfgclk: clk-spicfg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <75000000>;
+	};
+
+	sysclk: clk-sys {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	audmclk: clk-audm {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk1>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	audsclk: clk-auds {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk1>;
+		#clock-cells = <0>;
+		clock-div = <8>;
+		clock-mult = <1>;
+	};
+
+	spiclcd: clk-cpiclcd {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	spicon: clk-spicon {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	i2cclcd: clk-i2cclcd {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	i2caud: clk-i2caud {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+
+		apb@40000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40000000 0x10000>;
+
+			timer0: mps2-timer0@0 {
+				compatible = "arm,mps2-timer";
+				reg = <0x0 0x1000>;
+				interrupts = <8>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			timer1: mps2-timer1@1000 {
+				compatible = "arm,mps2-timer";
+				reg = <0x1000 0x1000>;
+				interrupts = <9>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			timer2: dual-timer@2000 {
+				compatible = "arm,sp804";
+				reg = <0x2000 0x1000>;
+				clocks = <&sysclk>;
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			uart0: serial@4000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x4000 0x1000>;
+				interrupts = <0 1 12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			uart1: serial@5000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x5000 0x1000>;
+				interrupts = <2 3 12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			uart2: serial@6000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x6000 0x1000>;
+				interrupts = <4 5 12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			wdt: watchdog@8000 {
+				compatible = "arm,sp805", "arm,primecell";
+				arm,primecell-periphid = <0x00141805>;
+				reg = <0x8000 0x1000>;
+				interrupts = <0>;
+				clocks = <&sysclk>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+
+	fpga@40020000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40020000 0x10000>;
+
+		fpgaio@8000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x8000 0x10>;
+
+			led0 {
+				compatible = "register-bit-led";
+				offset = <0x0>;
+				mask = <0x01>;
+				label = "userled:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+
+			led1 {
+				compatible = "register-bit-led";
+				offset = <0x0>;
+				mask = <0x02>;
+				label = "userled:1";
+				linux,default-trigger = "usr";
+				default-state = "off";
+			};
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40200000 0x10000>,
+			 <1 0 0xa0000000 0x10000>;
+	};
+};
diff --git a/arch/arm/mach-netx/include/mach/param.h b/arch/arm/boot/dts/mt2701-evb.dts
index a77145920..082ca8807 100644
--- a/arch/arm/mach-netx/include/mach/param.h
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -1,18 +1,29 @@
 /*
- *  arch/arm/mach-netx/include/mach/param.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin Lo <erin.lo@mediatek.com>
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+
+/dts-v1/;
+#include "mt2701.dtsi"
+
+/ {
+	model = "MediaTek MT2701 evaluation board";
+	compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
+
+	memory {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mt2701-pinfunc.h
new file mode 100644
index 000000000..e24ebc8d9
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701-pinfunc.h
@@ -0,0 +1,735 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Biao Huang <biao.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DTS_MT2701_PINFUNC_H
+#define __DTS_MT2701_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(0) | 1)
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDI (MTK_PIN_NO(0) | 2)
+
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(1) | 1)
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDO (MTK_PIN_NO(1) | 2)
+
+#define MT2701_PIN_2_PWRAP_INT__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT2701_PIN_2_PWRAP_INT__FUNC_PWRAP_INT (MTK_PIN_NO(2) | 1)
+
+#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(3) | 1)
+
+#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(4) | 1)
+
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_PWRAP_SPICK2_I (MTK_PIN_NO(5) | 1)
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 5)
+
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_PWRAP_SPICS2_B_I (MTK_PIN_NO(6) | 1)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_ANT_SEL0 (MTK_PIN_NO(6) | 5)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_DBG_MON_A_0 (MTK_PIN_NO(6) | 7)
+
+#define MT2701_PIN_7_SPI1_CSN__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS (MTK_PIN_NO(7) | 1)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_KCOL0 (MTK_PIN_NO(7) | 4)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_DBG_MON_B_12 (MTK_PIN_NO(7) | 7)
+
+#define MT2701_PIN_8_SPI1_MI__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI (MTK_PIN_NO(8) | 1)
+#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MO (MTK_PIN_NO(8) | 2)
+#define MT2701_PIN_8_SPI1_MI__FUNC_KCOL1 (MTK_PIN_NO(8) | 4)
+#define MT2701_PIN_8_SPI1_MI__FUNC_DBG_MON_B_13 (MTK_PIN_NO(8) | 7)
+
+#define MT2701_PIN_9_SPI1_MO__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO (MTK_PIN_NO(9) | 1)
+#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MI (MTK_PIN_NO(9) | 2)
+#define MT2701_PIN_9_SPI1_MO__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT2701_PIN_9_SPI1_MO__FUNC_KCOL2 (MTK_PIN_NO(9) | 4)
+#define MT2701_PIN_9_SPI1_MO__FUNC_DBG_MON_B_14 (MTK_PIN_NO(9) | 7)
+
+#define MT2701_PIN_10_RTC32K_CK__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT2701_PIN_10_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(10) | 1)
+
+#define MT2701_PIN_11_WATCHDOG__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT2701_PIN_11_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(11) | 1)
+
+#define MT2701_PIN_12_SRCLKENA__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT2701_PIN_12_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(12) | 1)
+
+#define MT2701_PIN_13_SRCLKENAI__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT2701_PIN_13_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(13) | 1)
+
+#define MT2701_PIN_14_URXD2__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT2701_PIN_14_URXD2__FUNC_URXD2 (MTK_PIN_NO(14) | 1)
+#define MT2701_PIN_14_URXD2__FUNC_UTXD2 (MTK_PIN_NO(14) | 2)
+#define MT2701_PIN_14_URXD2__FUNC_SRCCLKENAI2 (MTK_PIN_NO(14) | 5)
+#define MT2701_PIN_14_URXD2__FUNC_DBG_MON_B_30 (MTK_PIN_NO(14) | 7)
+
+#define MT2701_PIN_15_UTXD2__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT2701_PIN_15_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(15) | 1)
+#define MT2701_PIN_15_UTXD2__FUNC_URXD2 (MTK_PIN_NO(15) | 2)
+#define MT2701_PIN_15_UTXD2__FUNC_DBG_MON_B_31 (MTK_PIN_NO(15) | 7)
+
+#define MT2701_PIN_18_PCM_CLK__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT2701_PIN_18_PCM_CLK__FUNC_PCM_CLK0 (MTK_PIN_NO(18) | 1)
+#define MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(18) | 2)
+#define MT2701_PIN_18_PCM_CLK__FUNC_MM_TEST_CK (MTK_PIN_NO(18) | 4)
+#define MT2701_PIN_18_PCM_CLK__FUNC_CONN_DSP_JCK (MTK_PIN_NO(18) | 5)
+#define MT2701_PIN_18_PCM_CLK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(18) | 6)
+#define MT2701_PIN_18_PCM_CLK__FUNC_DBG_MON_A_3 (MTK_PIN_NO(18) | 7)
+
+#define MT2701_PIN_19_PCM_SYNC__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_PCM_SYNC (MTK_PIN_NO(19) | 1)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(19) | 2)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(19) | 5)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(19) | 6)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_DBG_MON_A_5 (MTK_PIN_NO(19) | 7)
+
+#define MT2701_PIN_20_PCM_RX__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT2701_PIN_20_PCM_RX__FUNC_PCM_RX (MTK_PIN_NO(20) | 1)
+#define MT2701_PIN_20_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(20) | 2)
+#define MT2701_PIN_20_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(20) | 3)
+#define MT2701_PIN_20_PCM_RX__FUNC_PCM_TX (MTK_PIN_NO(20) | 4)
+#define MT2701_PIN_20_PCM_RX__FUNC_CONN_DSP_JDI (MTK_PIN_NO(20) | 5)
+#define MT2701_PIN_20_PCM_RX__FUNC_WCN_PCM_RX (MTK_PIN_NO(20) | 6)
+#define MT2701_PIN_20_PCM_RX__FUNC_DBG_MON_A_4 (MTK_PIN_NO(20) | 7)
+
+#define MT2701_PIN_21_PCM_TX__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT2701_PIN_21_PCM_TX__FUNC_PCM_TX (MTK_PIN_NO(21) | 1)
+#define MT2701_PIN_21_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(21) | 2)
+#define MT2701_PIN_21_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(21) | 3)
+#define MT2701_PIN_21_PCM_TX__FUNC_PCM_RX (MTK_PIN_NO(21) | 4)
+#define MT2701_PIN_21_PCM_TX__FUNC_CONN_DSP_JMS (MTK_PIN_NO(21) | 5)
+#define MT2701_PIN_21_PCM_TX__FUNC_WCN_PCM_TX (MTK_PIN_NO(21) | 6)
+#define MT2701_PIN_21_PCM_TX__FUNC_DBG_MON_A_2 (MTK_PIN_NO(21) | 7)
+
+#define MT2701_PIN_22_EINT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT2701_PIN_22_EINT0__FUNC_UCTS0 (MTK_PIN_NO(22) | 1)
+#define MT2701_PIN_22_EINT0__FUNC_KCOL3 (MTK_PIN_NO(22) | 3)
+#define MT2701_PIN_22_EINT0__FUNC_CONN_DSP_JDO (MTK_PIN_NO(22) | 4)
+#define MT2701_PIN_22_EINT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 5)
+#define MT2701_PIN_22_EINT0__FUNC_DBG_MON_A_30 (MTK_PIN_NO(22) | 7)
+#define MT2701_PIN_22_EINT0__FUNC_PCIE0_PERST_N (MTK_PIN_NO(22) | 10)
+
+#define MT2701_PIN_23_EINT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT2701_PIN_23_EINT1__FUNC_URTS0 (MTK_PIN_NO(23) | 1)
+#define MT2701_PIN_23_EINT1__FUNC_KCOL2 (MTK_PIN_NO(23) | 3)
+#define MT2701_PIN_23_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(23) | 4)
+#define MT2701_PIN_23_EINT1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5)
+#define MT2701_PIN_23_EINT1__FUNC_DBG_MON_A_29 (MTK_PIN_NO(23) | 7)
+#define MT2701_PIN_23_EINT1__FUNC_PCIE1_PERST_N (MTK_PIN_NO(23) | 10)
+
+#define MT2701_PIN_24_EINT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT2701_PIN_24_EINT2__FUNC_UCTS1 (MTK_PIN_NO(24) | 1)
+#define MT2701_PIN_24_EINT2__FUNC_KCOL1 (MTK_PIN_NO(24) | 3)
+#define MT2701_PIN_24_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(24) | 4)
+#define MT2701_PIN_24_EINT2__FUNC_DBG_MON_A_28 (MTK_PIN_NO(24) | 7)
+#define MT2701_PIN_24_EINT2__FUNC_PCIE2_PERST_N (MTK_PIN_NO(24) | 10)
+
+#define MT2701_PIN_25_EINT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT2701_PIN_25_EINT3__FUNC_URTS1 (MTK_PIN_NO(25) | 1)
+#define MT2701_PIN_25_EINT3__FUNC_KCOL0 (MTK_PIN_NO(25) | 3)
+#define MT2701_PIN_25_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(25) | 4)
+#define MT2701_PIN_25_EINT3__FUNC_DBG_MON_A_27 (MTK_PIN_NO(25) | 7)
+
+#define MT2701_PIN_26_EINT4__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT2701_PIN_26_EINT4__FUNC_UCTS3 (MTK_PIN_NO(26) | 1)
+#define MT2701_PIN_26_EINT4__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(26) | 2)
+#define MT2701_PIN_26_EINT4__FUNC_KROW3 (MTK_PIN_NO(26) | 3)
+#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_TCK0 (MTK_PIN_NO(26) | 4)
+#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(26) | 5)
+#define MT2701_PIN_26_EINT4__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(26) | 6)
+#define MT2701_PIN_26_EINT4__FUNC_DBG_MON_A_26 (MTK_PIN_NO(26) | 7)
+
+#define MT2701_PIN_27_EINT5__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT2701_PIN_27_EINT5__FUNC_URTS3 (MTK_PIN_NO(27) | 1)
+#define MT2701_PIN_27_EINT5__FUNC_IDDIG_P1 (MTK_PIN_NO(27) | 2)
+#define MT2701_PIN_27_EINT5__FUNC_KROW2 (MTK_PIN_NO(27) | 3)
+#define MT2701_PIN_27_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(27) | 4)
+#define MT2701_PIN_27_EINT5__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(27) | 6)
+#define MT2701_PIN_27_EINT5__FUNC_DBG_MON_A_25 (MTK_PIN_NO(27) | 7)
+
+#define MT2701_PIN_28_EINT6__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT2701_PIN_28_EINT6__FUNC_DRV_VBUS (MTK_PIN_NO(28) | 1)
+#define MT2701_PIN_28_EINT6__FUNC_KROW1 (MTK_PIN_NO(28) | 3)
+#define MT2701_PIN_28_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(28) | 4)
+#define MT2701_PIN_28_EINT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(28) | 6)
+#define MT2701_PIN_28_EINT6__FUNC_DBG_MON_A_24 (MTK_PIN_NO(28) | 7)
+
+#define MT2701_PIN_29_EINT7__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT2701_PIN_29_EINT7__FUNC_IDDIG (MTK_PIN_NO(29) | 1)
+#define MT2701_PIN_29_EINT7__FUNC_MSDC1_WP (MTK_PIN_NO(29) | 2)
+#define MT2701_PIN_29_EINT7__FUNC_KROW0 (MTK_PIN_NO(29) | 3)
+#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(29) | 4)
+#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(29) | 5)
+#define MT2701_PIN_29_EINT7__FUNC_DBG_MON_A_23 (MTK_PIN_NO(29) | 7)
+#define MT2701_PIN_29_EINT7__FUNC_PCIE2_PERST_N (MTK_PIN_NO(29) | 14)
+
+#define MT2701_PIN_33_I2S1_DATA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA (MTK_PIN_NO(33) | 1)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA_BYPS (MTK_PIN_NO(33) | 2)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_PCM_TX (MTK_PIN_NO(33) | 3)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_IMG_TEST_CK (MTK_PIN_NO(33) | 4)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_G1_RXD0 (MTK_PIN_NO(33) | 5)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_WCN_PCM_TX (MTK_PIN_NO(33) | 6)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_DBG_MON_B_8 (MTK_PIN_NO(33) | 7)
+
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN (MTK_PIN_NO(34) | 1)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(34) | 3)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_VDEC_TEST_CK (MTK_PIN_NO(34) | 4)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_G1_RXD1 (MTK_PIN_NO(34) | 5)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_WCN_PCM_RX (MTK_PIN_NO(34) | 6)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_DBG_MON_B_7 (MTK_PIN_NO(34) | 7)
+
+#define MT2701_PIN_35_I2S1_BCK__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(35) | 1)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(35) | 3)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_G1_RXD2 (MTK_PIN_NO(35) | 5)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(35) | 6)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_DBG_MON_B_9 (MTK_PIN_NO(35) | 7)
+
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK (MTK_PIN_NO(36) | 1)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(36) | 3)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_G1_RXD3 (MTK_PIN_NO(36) | 5)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(36) | 6)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_DBG_MON_B_10 (MTK_PIN_NO(36) | 7)
+
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK (MTK_PIN_NO(37) | 1)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_G1_RXDV (MTK_PIN_NO(37) | 5)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_DBG_MON_B_11 (MTK_PIN_NO(37) | 7)
+
+#define MT2701_PIN_39_JTMS__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT2701_PIN_39_JTMS__FUNC_JTMS (MTK_PIN_NO(39) | 1)
+#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(39) | 2)
+#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(39) | 3)
+#define MT2701_PIN_39_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(39) | 4)
+
+#define MT2701_PIN_40_JTCK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT2701_PIN_40_JTCK__FUNC_JTCK (MTK_PIN_NO(40) | 1)
+#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_TCK1 (MTK_PIN_NO(40) | 2)
+#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(40) | 3)
+#define MT2701_PIN_40_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(40) | 4)
+
+#define MT2701_PIN_41_JTDI__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT2701_PIN_41_JTDI__FUNC_JTDI (MTK_PIN_NO(41) | 1)
+#define MT2701_PIN_41_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(41) | 2)
+#define MT2701_PIN_41_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(41) | 4)
+
+#define MT2701_PIN_42_JTDO__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT2701_PIN_42_JTDO__FUNC_JTDO (MTK_PIN_NO(42) | 1)
+#define MT2701_PIN_42_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(42) | 2)
+#define MT2701_PIN_42_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(42) | 4)
+
+#define MT2701_PIN_43_NCLE__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT2701_PIN_43_NCLE__FUNC_NCLE (MTK_PIN_NO(43) | 1)
+#define MT2701_PIN_43_NCLE__FUNC_EXT_XCS2 (MTK_PIN_NO(43) | 2)
+
+#define MT2701_PIN_44_NCEB1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT2701_PIN_44_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(44) | 1)
+#define MT2701_PIN_44_NCEB1__FUNC_IDDIG (MTK_PIN_NO(44) | 2)
+
+#define MT2701_PIN_45_NCEB0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT2701_PIN_45_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(45) | 1)
+#define MT2701_PIN_45_NCEB0__FUNC_DRV_VBUS (MTK_PIN_NO(45) | 2)
+
+#define MT2701_PIN_46_IR__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT2701_PIN_46_IR__FUNC_IR (MTK_PIN_NO(46) | 1)
+
+#define MT2701_PIN_47_NREB__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT2701_PIN_47_NREB__FUNC_NREB (MTK_PIN_NO(47) | 1)
+#define MT2701_PIN_47_NREB__FUNC_IDDIG_P1 (MTK_PIN_NO(47) | 2)
+
+#define MT2701_PIN_48_NRNB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT2701_PIN_48_NRNB__FUNC_NRNB (MTK_PIN_NO(48) | 1)
+#define MT2701_PIN_48_NRNB__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(48) | 2)
+
+#define MT2701_PIN_49_I2S0_DATA__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA (MTK_PIN_NO(49) | 1)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA_BYPS (MTK_PIN_NO(49) | 2)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_PCM_TX (MTK_PIN_NO(49) | 3)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_WCN_I2S_DO (MTK_PIN_NO(49) | 6)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_DBG_MON_B_3 (MTK_PIN_NO(49) | 7)
+
+#define MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS (MTK_PIN_NO(53) | 1)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_SPDIF (MTK_PIN_NO(53) | 3)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_ADC_CK (MTK_PIN_NO(53) | 4)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_PWM1 (MTK_PIN_NO(53) | 5)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_DBG_MON_A_7 (MTK_PIN_NO(53) | 7)
+
+#define MT2701_PIN_54_SPI0_CK__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK (MTK_PIN_NO(54) | 1)
+#define MT2701_PIN_54_SPI0_CK__FUNC_SPDIF_IN1 (MTK_PIN_NO(54) | 3)
+#define MT2701_PIN_54_SPI0_CK__FUNC_ADC_DAT_IN (MTK_PIN_NO(54) | 4)
+#define MT2701_PIN_54_SPI0_CK__FUNC_DBG_MON_A_10 (MTK_PIN_NO(54) | 7)
+
+#define MT2701_PIN_55_SPI0_MI__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI (MTK_PIN_NO(55) | 1)
+#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MO (MTK_PIN_NO(55) | 2)
+#define MT2701_PIN_55_SPI0_MI__FUNC_MSDC1_WP (MTK_PIN_NO(55) | 3)
+#define MT2701_PIN_55_SPI0_MI__FUNC_ADC_WS (MTK_PIN_NO(55) | 4)
+#define MT2701_PIN_55_SPI0_MI__FUNC_PWM2 (MTK_PIN_NO(55) | 5)
+#define MT2701_PIN_55_SPI0_MI__FUNC_DBG_MON_A_8 (MTK_PIN_NO(55) | 7)
+
+#define MT2701_PIN_56_SPI0_MO__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO (MTK_PIN_NO(56) | 1)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MI (MTK_PIN_NO(56) | 2)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPDIF_IN0 (MTK_PIN_NO(56) | 3)
+#define MT2701_PIN_56_SPI0_MO__FUNC_DBG_MON_A_9 (MTK_PIN_NO(56) | 7)
+
+#define MT2701_PIN_57_SDA1__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT2701_PIN_57_SDA1__FUNC_SDA1 (MTK_PIN_NO(57) | 1)
+
+#define MT2701_PIN_58_SCL1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT2701_PIN_58_SCL1__FUNC_SCL1 (MTK_PIN_NO(58) | 1)
+
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN (MTK_PIN_NO(72) | 1)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(72) | 3)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PWM0 (MTK_PIN_NO(72) | 4)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DISP_PWM (MTK_PIN_NO(72) | 5)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_WCN_I2S_DI (MTK_PIN_NO(72) | 6)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DBG_MON_B_2 (MTK_PIN_NO(72) | 7)
+
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(73) | 1)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(73) | 3)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_WCN_I2S_LRCK (MTK_PIN_NO(73) | 6)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_DBG_MON_B_5 (MTK_PIN_NO(73) | 7)
+
+#define MT2701_PIN_74_I2S0_BCK__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(74) | 1)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(74) | 3)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_WCN_I2S_BCK (MTK_PIN_NO(74) | 6)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_DBG_MON_B_4 (MTK_PIN_NO(74) | 7)
+
+#define MT2701_PIN_75_SDA0__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT2701_PIN_75_SDA0__FUNC_SDA0 (MTK_PIN_NO(75) | 1)
+
+#define MT2701_PIN_76_SCL0__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT2701_PIN_76_SCL0__FUNC_SCL0 (MTK_PIN_NO(76) | 1)
+
+#define MT2701_PIN_77_SDA2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT2701_PIN_77_SDA2__FUNC_SDA2 (MTK_PIN_NO(77) | 1)
+
+#define MT2701_PIN_78_SCL2__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT2701_PIN_78_SCL2__FUNC_SCL2 (MTK_PIN_NO(78) | 1)
+
+#define MT2701_PIN_79_URXD0__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT2701_PIN_79_URXD0__FUNC_URXD0 (MTK_PIN_NO(79) | 1)
+#define MT2701_PIN_79_URXD0__FUNC_UTXD0 (MTK_PIN_NO(79) | 2)
+#define MT2701_PIN_79_URXD0__FUNC_ (MTK_PIN_NO(79) | 5)
+
+#define MT2701_PIN_80_UTXD0__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT2701_PIN_80_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(80) | 1)
+#define MT2701_PIN_80_UTXD0__FUNC_URXD0 (MTK_PIN_NO(80) | 2)
+
+#define MT2701_PIN_81_URXD1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT2701_PIN_81_URXD1__FUNC_URXD1 (MTK_PIN_NO(81) | 1)
+#define MT2701_PIN_81_URXD1__FUNC_UTXD1 (MTK_PIN_NO(81) | 2)
+
+#define MT2701_PIN_82_UTXD1__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT2701_PIN_82_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(82) | 1)
+#define MT2701_PIN_82_UTXD1__FUNC_URXD1 (MTK_PIN_NO(82) | 2)
+
+#define MT2701_PIN_83_LCM_RST__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT2701_PIN_83_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(83) | 1)
+#define MT2701_PIN_83_LCM_RST__FUNC_VDAC_CK_XI (MTK_PIN_NO(83) | 2)
+#define MT2701_PIN_83_LCM_RST__FUNC_DBG_MON_B_1 (MTK_PIN_NO(83) | 7)
+
+#define MT2701_PIN_84_DSI_TE__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT2701_PIN_84_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(84) | 1)
+#define MT2701_PIN_84_DSI_TE__FUNC_DBG_MON_B_0 (MTK_PIN_NO(84) | 7)
+
+#define MT2701_PIN_91_TDN3__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT2701_PIN_91_TDN3__FUNC_TDN3 (MTK_PIN_NO(91) | 1)
+
+#define MT2701_PIN_92_TDP3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT2701_PIN_92_TDP3__FUNC_TDP3 (MTK_PIN_NO(92) | 1)
+
+#define MT2701_PIN_93_TDN2__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT2701_PIN_93_TDN2__FUNC_TDN2 (MTK_PIN_NO(93) | 1)
+
+#define MT2701_PIN_94_TDP2__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT2701_PIN_94_TDP2__FUNC_TDP2 (MTK_PIN_NO(94) | 1)
+
+#define MT2701_PIN_95_TCN__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT2701_PIN_95_TCN__FUNC_TCN (MTK_PIN_NO(95) | 1)
+
+#define MT2701_PIN_96_TCP__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT2701_PIN_96_TCP__FUNC_TCP (MTK_PIN_NO(96) | 1)
+
+#define MT2701_PIN_97_TDN1__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT2701_PIN_97_TDN1__FUNC_TDN1 (MTK_PIN_NO(97) | 1)
+
+#define MT2701_PIN_98_TDP1__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT2701_PIN_98_TDP1__FUNC_TDP1 (MTK_PIN_NO(98) | 1)
+
+#define MT2701_PIN_99_TDN0__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT2701_PIN_99_TDN0__FUNC_TDN0 (MTK_PIN_NO(99) | 1)
+
+#define MT2701_PIN_100_TDP0__FUNC_GPI100 (MTK_PIN_NO(100) | 0)
+#define MT2701_PIN_100_TDP0__FUNC_TDP0 (MTK_PIN_NO(100) | 1)
+
+#define MT2701_PIN_101_SPI2_CSN__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS (MTK_PIN_NO(101) | 1)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_SCL3 (MTK_PIN_NO(101) | 3)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_KROW0 (MTK_PIN_NO(101) | 4)
+
+#define MT2701_PIN_102_SPI2_MI__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI (MTK_PIN_NO(102) | 1)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MO (MTK_PIN_NO(102) | 2)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SDA3 (MTK_PIN_NO(102) | 3)
+#define MT2701_PIN_102_SPI2_MI__FUNC_KROW1 (MTK_PIN_NO(102) | 4)
+
+#define MT2701_PIN_103_SPI2_MO__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO (MTK_PIN_NO(103) | 1)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MI (MTK_PIN_NO(103) | 2)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SCL3 (MTK_PIN_NO(103) | 3)
+#define MT2701_PIN_103_SPI2_MO__FUNC_KROW2 (MTK_PIN_NO(103) | 4)
+
+#define MT2701_PIN_104_SPI2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK (MTK_PIN_NO(104) | 1)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 3)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_KROW3 (MTK_PIN_NO(104) | 4)
+
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(105) | 1)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_ANT_SEL0 (MTK_PIN_NO(105) | 2)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_SDA1 (MTK_PIN_NO(105) | 3)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_I2SOUT_BCK (MTK_PIN_NO(105) | 6)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_DBG_MON_B_27 (MTK_PIN_NO(105) | 7)
+
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(106) | 1)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_ANT_SEL1 (MTK_PIN_NO(106) | 2)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_SCL1 (MTK_PIN_NO(106) | 3)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_I2SOUT_LRCK (MTK_PIN_NO(106) | 6)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_DBG_MON_B_28 (MTK_PIN_NO(106) | 7)
+
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(107) | 1)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(107) | 2)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_UTXD0 (MTK_PIN_NO(107) | 5)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_I2SOUT_DATA_OUT (MTK_PIN_NO(107) | 6)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_DBG_MON_B_26 (MTK_PIN_NO(107) | 7)
+
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(108) | 1)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(108) | 2)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM0 (MTK_PIN_NO(108) | 3)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_URXD0 (MTK_PIN_NO(108) | 5)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM1 (MTK_PIN_NO(108) | 6)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_DBG_MON_B_25 (MTK_PIN_NO(108) | 7)
+
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(109) | 1)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_ANT_SEL4 (MTK_PIN_NO(109) | 2)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_SDA2 (MTK_PIN_NO(109) | 3)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_UTXD1 (MTK_PIN_NO(109) | 5)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_PWM2 (MTK_PIN_NO(109) | 6)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_DBG_MON_B_24 (MTK_PIN_NO(109) | 7)
+
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(110) | 1)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_ANT_SEL5 (MTK_PIN_NO(110) | 2)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_SCL2 (MTK_PIN_NO(110) | 3)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(110) | 4)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_URXD1 (MTK_PIN_NO(110) | 5)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_PWM3 (MTK_PIN_NO(110) | 6)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_DBG_MON_B_23 (MTK_PIN_NO(110) | 7)
+
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(111) | 1)
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(111) | 4)
+
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(112) | 1)
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(112) | 4)
+
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(113) | 1)
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5 (MTK_PIN_NO(113) | 4)
+
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(114) | 1)
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4 (MTK_PIN_NO(114) | 4)
+
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(115) | 1)
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8 (MTK_PIN_NO(115) | 4)
+
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(116) | 1)
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(116) | 4)
+
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(117) | 1)
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(117) | 4)
+
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(118) | 1)
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3 (MTK_PIN_NO(118) | 4)
+
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(119) | 1)
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2 (MTK_PIN_NO(119) | 4)
+
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(120) | 1)
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1 (MTK_PIN_NO(120) | 4)
+
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(121) | 1)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0 (MTK_PIN_NO(121) | 4)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(121) | 5)
+
+#define MT2701_PIN_122_CEC__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT2701_PIN_122_CEC__FUNC_CEC (MTK_PIN_NO(122) | 1)
+#define MT2701_PIN_122_CEC__FUNC_SDA2 (MTK_PIN_NO(122) | 4)
+#define MT2701_PIN_122_CEC__FUNC_URXD0 (MTK_PIN_NO(122) | 5)
+
+#define MT2701_PIN_123_HTPLG__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT2701_PIN_123_HTPLG__FUNC_HTPLG (MTK_PIN_NO(123) | 1)
+#define MT2701_PIN_123_HTPLG__FUNC_SCL2 (MTK_PIN_NO(123) | 4)
+#define MT2701_PIN_123_HTPLG__FUNC_UTXD0 (MTK_PIN_NO(123) | 5)
+
+#define MT2701_PIN_124_HDMISCK__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT2701_PIN_124_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(124) | 1)
+#define MT2701_PIN_124_HDMISCK__FUNC_SDA1 (MTK_PIN_NO(124) | 4)
+#define MT2701_PIN_124_HDMISCK__FUNC_PWM3 (MTK_PIN_NO(124) | 5)
+
+#define MT2701_PIN_125_HDMISD__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT2701_PIN_125_HDMISD__FUNC_HDMISD (MTK_PIN_NO(125) | 1)
+#define MT2701_PIN_125_HDMISD__FUNC_SCL1 (MTK_PIN_NO(125) | 4)
+#define MT2701_PIN_125_HDMISD__FUNC_PWM4 (MTK_PIN_NO(125) | 5)
+
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK (MTK_PIN_NO(126) | 1)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_WCN_I2S_MCLK (MTK_PIN_NO(126) | 6)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_DBG_MON_B_6 (MTK_PIN_NO(126) | 7)
+
+#define MT2701_PIN_199_SPI1_CLK__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK (MTK_PIN_NO(199) | 1)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(199) | 3)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_KCOL3 (MTK_PIN_NO(199) | 4)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_DBG_MON_B_15 (MTK_PIN_NO(199) | 7)
+
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_SPDIF_OUT (MTK_PIN_NO(200) | 1)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_G1_TXD3 (MTK_PIN_NO(200) | 5)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_URXD2 (MTK_PIN_NO(200) | 6)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_DBG_MON_B_16 (MTK_PIN_NO(200) | 7)
+
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_SPDIF_IN0 (MTK_PIN_NO(201) | 1)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_G1_TXEN (MTK_PIN_NO(201) | 5)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_UTXD2 (MTK_PIN_NO(201) | 6)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(201) | 7)
+
+#define MT2701_PIN_202_SPDIF_IN1__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT2701_PIN_202_SPDIF_IN1__FUNC_SPDIF_IN1 (MTK_PIN_NO(202) | 1)
+
+#define MT2701_PIN_203_PWM0__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define MT2701_PIN_203_PWM0__FUNC_PWM0 (MTK_PIN_NO(203) | 1)
+#define MT2701_PIN_203_PWM0__FUNC_DISP_PWM (MTK_PIN_NO(203) | 2)
+#define MT2701_PIN_203_PWM0__FUNC_G1_TXD2 (MTK_PIN_NO(203) | 5)
+#define MT2701_PIN_203_PWM0__FUNC_DBG_MON_B_18 (MTK_PIN_NO(203) | 7)
+#define MT2701_PIN_203_PWM0__FUNC_I2S2_DATA (MTK_PIN_NO(203) | 9)
+
+#define MT2701_PIN_204_PWM1__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define MT2701_PIN_204_PWM1__FUNC_PWM1 (MTK_PIN_NO(204) | 1)
+#define MT2701_PIN_204_PWM1__FUNC_CLKM3 (MTK_PIN_NO(204) | 2)
+#define MT2701_PIN_204_PWM1__FUNC_G1_TXD1 (MTK_PIN_NO(204) | 5)
+#define MT2701_PIN_204_PWM1__FUNC_DBG_MON_B_19 (MTK_PIN_NO(204) | 7)
+#define MT2701_PIN_204_PWM1__FUNC_I2S3_DATA (MTK_PIN_NO(204) | 9)
+
+#define MT2701_PIN_205_PWM2__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define MT2701_PIN_205_PWM2__FUNC_PWM2 (MTK_PIN_NO(205) | 1)
+#define MT2701_PIN_205_PWM2__FUNC_CLKM2 (MTK_PIN_NO(205) | 2)
+#define MT2701_PIN_205_PWM2__FUNC_G1_TXD0 (MTK_PIN_NO(205) | 5)
+#define MT2701_PIN_205_PWM2__FUNC_DBG_MON_B_20 (MTK_PIN_NO(205) | 7)
+
+#define MT2701_PIN_206_PWM3__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define MT2701_PIN_206_PWM3__FUNC_PWM3 (MTK_PIN_NO(206) | 1)
+#define MT2701_PIN_206_PWM3__FUNC_CLKM1 (MTK_PIN_NO(206) | 2)
+#define MT2701_PIN_206_PWM3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(206) | 3)
+#define MT2701_PIN_206_PWM3__FUNC_G1_TXC (MTK_PIN_NO(206) | 5)
+#define MT2701_PIN_206_PWM3__FUNC_DBG_MON_B_21 (MTK_PIN_NO(206) | 7)
+
+#define MT2701_PIN_207_PWM4__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define MT2701_PIN_207_PWM4__FUNC_PWM4 (MTK_PIN_NO(207) | 1)
+#define MT2701_PIN_207_PWM4__FUNC_CLKM0 (MTK_PIN_NO(207) | 2)
+#define MT2701_PIN_207_PWM4__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(207) | 3)
+#define MT2701_PIN_207_PWM4__FUNC_G1_RXC (MTK_PIN_NO(207) | 5)
+#define MT2701_PIN_207_PWM4__FUNC_DBG_MON_B_22 (MTK_PIN_NO(207) | 7)
+
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(208) | 1)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PWM0 (MTK_PIN_NO(208) | 2)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_ANT_SEL5 (MTK_PIN_NO(208) | 4)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM (MTK_PIN_NO(208) | 5)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(208) | 7)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PCIE0_PERST_N (MTK_PIN_NO(208) | 11)
+
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(209) | 1)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_MSDC1_WP (MTK_PIN_NO(209) | 2)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PWM1 (MTK_PIN_NO(209) | 5)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_DBG_MON_A_32 (MTK_PIN_NO(209) | 7)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PCIE1_PERST_N (MTK_PIN_NO(209) | 11)
+
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_GPIO236 (MTK_PIN_NO(236) | 0)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3 (MTK_PIN_NO(236) | 1)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_IDDIG (MTK_PIN_NO(236) | 2)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_DBG_MON_A_1 (MTK_PIN_NO(236) | 7)
+
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_GPIO237 (MTK_PIN_NO(237) | 0)
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2 (MTK_PIN_NO(237) | 1)
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_DRV_VBUS (MTK_PIN_NO(237) | 2)
+
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_GPIO238 (MTK_PIN_NO(238) | 0)
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1 (MTK_PIN_NO(238) | 1)
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_IDDIG_P1 (MTK_PIN_NO(238) | 2)
+
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_GPIO239 (MTK_PIN_NO(239) | 0)
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0 (MTK_PIN_NO(239) | 1)
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(239) | 2)
+
+#define MT2701_PIN_240_EXT_XCS__FUNC_GPIO240 (MTK_PIN_NO(240) | 0)
+#define MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS (MTK_PIN_NO(240) | 1)
+
+#define MT2701_PIN_241_EXT_SCK__FUNC_GPIO241 (MTK_PIN_NO(241) | 0)
+#define MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK (MTK_PIN_NO(241) | 1)
+
+#define MT2701_PIN_242_URTS2__FUNC_GPIO242 (MTK_PIN_NO(242) | 0)
+#define MT2701_PIN_242_URTS2__FUNC_URTS2 (MTK_PIN_NO(242) | 1)
+#define MT2701_PIN_242_URTS2__FUNC_UTXD3 (MTK_PIN_NO(242) | 2)
+#define MT2701_PIN_242_URTS2__FUNC_URXD3 (MTK_PIN_NO(242) | 3)
+#define MT2701_PIN_242_URTS2__FUNC_SCL1 (MTK_PIN_NO(242) | 4)
+#define MT2701_PIN_242_URTS2__FUNC_DBG_MON_B_32 (MTK_PIN_NO(242) | 7)
+
+#define MT2701_PIN_243_UCTS2__FUNC_GPIO243 (MTK_PIN_NO(243) | 0)
+#define MT2701_PIN_243_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(243) | 1)
+#define MT2701_PIN_243_UCTS2__FUNC_URXD3 (MTK_PIN_NO(243) | 2)
+#define MT2701_PIN_243_UCTS2__FUNC_UTXD3 (MTK_PIN_NO(243) | 3)
+#define MT2701_PIN_243_UCTS2__FUNC_SDA1 (MTK_PIN_NO(243) | 4)
+#define MT2701_PIN_243_UCTS2__FUNC_DBG_MON_A_6 (MTK_PIN_NO(243) | 7)
+
+#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_GPIO244 (MTK_PIN_NO(244) | 0)
+#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_HDMI_SDA_RX (MTK_PIN_NO(244) | 1)
+
+#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_GPIO245 (MTK_PIN_NO(245) | 0)
+#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_HDMI_SCL_RX (MTK_PIN_NO(245) | 1)
+
+#define MT2701_PIN_246_MHL_SENCE__FUNC_GPIO246 (MTK_PIN_NO(246) | 0)
+
+#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_GPIO247 (MTK_PIN_NO(247) | 0)
+#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_HDMI_HPD_RX (MTK_PIN_NO(247) | 1)
+
+#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_GPIO248 (MTK_PIN_NO(248) | 0)
+#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_HDMI_TESTOUTP_RX (MTK_PIN_NO(248) | 1)
+
+#define MT2701_PIN_249_MSDC0E_RSTB__FUNC_MSDC0E_RSTB (MTK_PIN_NO(249) | 9)
+
+#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_MSDC3_DAT7 (MTK_PIN_NO(250) | 9)
+#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_PCIE0_CLKREQ_N (MTK_PIN_NO(250) | 14)
+
+#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_MSDC3_DAT6 (MTK_PIN_NO(251) | 9)
+#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(251) | 14)
+
+#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_MSDC3_DAT5 (MTK_PIN_NO(252) | 9)
+#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_PCIE1_CLKREQ_N (MTK_PIN_NO(252) | 14)
+
+#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_MSDC3_DAT4 (MTK_PIN_NO(253) | 9)
+#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(253) | 14)
+
+#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(254) | 9)
+#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_PCIE2_CLKREQ_N (MTK_PIN_NO(254) | 14)
+
+#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(255) | 9)
+#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(255) | 14)
+
+#define MT2701_PIN_256_MSDC0E_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(256) | 9)
+
+#define MT2701_PIN_257_MSDC0E_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(257) | 9)
+
+#define MT2701_PIN_258_MSDC0E_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(258) | 9)
+
+#define MT2701_PIN_259_MSDC0E_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(259) | 9)
+
+#define MT2701_PIN_260_MSDC0E_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(260) | 9)
+
+#define MT2701_PIN_261_MSDC1_INS__FUNC_GPIO261 (MTK_PIN_NO(261) | 0)
+#define MT2701_PIN_261_MSDC1_INS__FUNC_MSDC1_INS (MTK_PIN_NO(261) | 1)
+#define MT2701_PIN_261_MSDC1_INS__FUNC_DBG_MON_B_29 (MTK_PIN_NO(261) | 7)
+
+#define MT2701_PIN_262_G2_TXEN__FUNC_GPIO262 (MTK_PIN_NO(262) | 0)
+#define MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN (MTK_PIN_NO(262) | 1)
+
+#define MT2701_PIN_263_G2_TXD3__FUNC_GPIO263 (MTK_PIN_NO(263) | 0)
+#define MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3 (MTK_PIN_NO(263) | 1)
+#define MT2701_PIN_263_G2_TXD3__FUNC_ANT_SEL5 (MTK_PIN_NO(263) | 6)
+
+#define MT2701_PIN_264_G2_TXD2__FUNC_GPIO264 (MTK_PIN_NO(264) | 0)
+#define MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2 (MTK_PIN_NO(264) | 1)
+#define MT2701_PIN_264_G2_TXD2__FUNC_ANT_SEL4 (MTK_PIN_NO(264) | 6)
+
+#define MT2701_PIN_265_G2_TXD1__FUNC_GPIO265 (MTK_PIN_NO(265) | 0)
+#define MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1 (MTK_PIN_NO(265) | 1)
+#define MT2701_PIN_265_G2_TXD1__FUNC_ANT_SEL3 (MTK_PIN_NO(265) | 6)
+
+#define MT2701_PIN_266_G2_TXD0__FUNC_GPIO266 (MTK_PIN_NO(266) | 0)
+#define MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0 (MTK_PIN_NO(266) | 1)
+#define MT2701_PIN_266_G2_TXD0__FUNC_ANT_SEL2 (MTK_PIN_NO(266) | 6)
+
+#define MT2701_PIN_267_G2_TXC__FUNC_GPIO267 (MTK_PIN_NO(267) | 0)
+#define MT2701_PIN_267_G2_TXC__FUNC_G2_TXC (MTK_PIN_NO(267) | 1)
+
+#define MT2701_PIN_268_G2_RXC__FUNC_GPIO268 (MTK_PIN_NO(268) | 0)
+#define MT2701_PIN_268_G2_RXC__FUNC_G2_RXC (MTK_PIN_NO(268) | 1)
+
+#define MT2701_PIN_269_G2_RXD0__FUNC_GPIO269 (MTK_PIN_NO(269) | 0)
+#define MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0 (MTK_PIN_NO(269) | 1)
+
+#define MT2701_PIN_270_G2_RXD1__FUNC_GPIO270 (MTK_PIN_NO(270) | 0)
+#define MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1 (MTK_PIN_NO(270) | 1)
+
+#define MT2701_PIN_271_G2_RXD2__FUNC_GPIO271 (MTK_PIN_NO(271) | 0)
+#define MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2 (MTK_PIN_NO(271) | 1)
+
+#define MT2701_PIN_272_G2_RXD3__FUNC_GPIO272 (MTK_PIN_NO(272) | 0)
+#define MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1)
+
+#define MT2701_PIN_274_G2_RXDV__FUNC_GPIO274 (MTK_PIN_NO(274) | 0)
+#define MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV (MTK_PIN_NO(274) | 1)
+
+#define MT2701_PIN_275_MDC__FUNC_GPIO275 (MTK_PIN_NO(275) | 0)
+#define MT2701_PIN_275_MDC__FUNC_MDC (MTK_PIN_NO(275) | 1)
+#define MT2701_PIN_275_MDC__FUNC_ANT_SEL0 (MTK_PIN_NO(275) | 6)
+
+#define MT2701_PIN_276_MDIO__FUNC_GPIO276 (MTK_PIN_NO(276) | 0)
+#define MT2701_PIN_276_MDIO__FUNC_MDIO (MTK_PIN_NO(276) | 1)
+#define MT2701_PIN_276_MDIO__FUNC_ANT_SEL1 (MTK_PIN_NO(276) | 6)
+
+#define MT2701_PIN_278_JTAG_RESET__FUNC_GPIO278 (MTK_PIN_NO(278) | 0)
+#define MT2701_PIN_278_JTAG_RESET__FUNC_JTAG_RESET (MTK_PIN_NO(278) | 1)
+
+#endif /* __DTS_MT2701_PINFUNC_H */
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
new file mode 100644
index 000000000..18596a2c5
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin.Lo <erin.lo@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+#include "mt2701-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt2701";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pio: pinctrl@10005000 {
+		compatible = "mediatek,mt2701-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		pins-are-numbered;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	syscfg_pctl_a: syscfg@10005000 {
+		compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt2701-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt2701-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt2701-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x1000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts
new file mode 100644
index 000000000..17daeae6b
--- /dev/null
+++ b/arch/arm/boot/dts/mt6580-evbp1.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6580.dtsi"
+
+/ {
+	model = "MediaTek MT6580 evaluation board";
+	compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi
new file mode 100644
index 000000000..06fdf6c2d
--- /dev/null
+++ b/arch/arm/boot/dts/mt6580.dtsi
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "mediatek,mt6580";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt6580-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6580-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x1000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11005000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11006000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11006000 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
new file mode 100644
index 000000000..a9ee2d64c
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623-evb.dts
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623.dtsi"
+
+/ {
+	model = "MediaTek MT7623 evaluation board";
+	compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
new file mode 100644
index 000000000..fd2b614ae
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+	compatible = "mediatek,mt7623";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt7623-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt7623-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt7623-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x1000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index ca3402e82..52086c801 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -23,6 +23,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -47,6 +48,17 @@
 
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -72,6 +84,21 @@
                 };
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
index 36677382b..460db6d05 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -24,6 +24,176 @@
 	};
 };
 
+&pwrap {
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-name = "va28";
+				regulator-always-on;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
+};
+
 &uart3 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 0aba9eb28..1d7f92bdc 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -12,8 +12,10 @@
  * GNU General Public License for more details.
  */
 
+#include <dt-bindings/clock/mt8135-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt8135-resets.h>
 #include "skeleton64.dtsi"
 #include "mt8135-pinfunc.h"
 
@@ -44,6 +46,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -70,6 +73,17 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -88,12 +102,26 @@
 			#clock-cells = <0>;
 		};
 
-		uart_clk: dummy26m {
+		clk26m: clk26m {
 			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
 			#clock-cells = <0>;
+			clock-frequency = <26000000>;
 		};
+	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
 	};
 
 	soc {
@@ -102,6 +130,26 @@
 		compatible = "simple-bus";
 		ranges;
 
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8135-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+		};
+
+		pericfg: pericfg@10003000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+		};
+
 		/*
 		 * Pinctrl access register at 0x10005000 and 0x1020c000 through
 		 * regmap. Register 0x1000b000 is used by EINT.
@@ -134,6 +182,19 @@
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8135-pwrap";
+			reg = <0 0x1000f000 0 0x1000>,
+				<0 0x11017000 0 0x1000>;
+			reg-names = "pwrap", "pwrap-bridge";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+					<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+			reset-names = "pwrap", "pwrap-bridge";
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
 		sysirq: interrupt-controller@10200030 {
 			compatible = "mediatek,mt8135-sysirq",
 				     "mediatek,mt6577-sysirq";
@@ -143,6 +204,12 @@
 			reg = <0 0x10200030 0 0x1c>;
 		};
 
+		apmixedsys: apmixedsys@10209000 {
+			compatible = "mediatek,mt8135-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		syscfg_pctl_b: syscfg_pctl_b@1020c000 {
 			compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
 			reg = <0 0x1020c000 0 0x1000>;
@@ -163,7 +230,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11006000 0 0x400>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -171,7 +239,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11007000 0 0x400>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -179,7 +248,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11008000 0 0x400>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -187,7 +257,8 @@
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11009000 0 0x400>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
new file mode 100644
index 000000000..e211a3c47
--- /dev/null
+++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree common file for gpio-fan on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpio-fan,speed-map =
+			<0		3
+			1500	2
+			3250	1
+			5000	0>;
+	};
+};
+
+&pinctrl {
+	pmx_fan_low: pmx-fan-low {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
new file mode 100644
index 000000000..68d75e79a
--- /dev/null
+++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_switch>;
+		pinctrl-names = "default";
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>;
+		pinctrl-names = "default";
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			default-state = "keep";
+		};
+
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_switch: pmx-power-switch {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index 390c91aea..ee5a0bb22 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -16,7 +16,7 @@
 
 	cpus {
 		cpu@0 {
-			compatible = "arm,arm926ejs";
+			compatible = "arm,arm926ej-s";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/omap2420-clocks.dtsi
index ce8c742d7..f8e5bd3cc 100644
--- a/arch/arm/boot/dts/omap2420-clocks.dtsi
+++ b/arch/arm/boot/dts/omap2420-clocks.dtsi
@@ -9,7 +9,7 @@
  */
 
 &prcm_clocks {
-	sys_clkout2_src_gate: sys_clkout2_src_gate {
+	sys_clkout2_src_gate: sys_clkout2_src_gate@70 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&core_ck>;
@@ -17,7 +17,7 @@
 		reg = <0x0070>;
 	};
 
-	sys_clkout2_src_mux: sys_clkout2_src_mux {
+	sys_clkout2_src_mux: sys_clkout2_src_mux@70 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
@@ -31,7 +31,7 @@
 		clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
 	};
 
-	sys_clkout2: sys_clkout2 {
+	sys_clkout2: sys_clkout2@70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkout2_src>;
@@ -41,7 +41,7 @@
 		ti,index-power-of-two;
 	};
 
-	dsp_gate_ick: dsp_gate_ick {
+	dsp_gate_ick: dsp_gate_ick@810 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-interface-clock";
 		clocks = <&dsp_fck>;
@@ -49,7 +49,7 @@
 		reg = <0x0810>;
 	};
 
-	dsp_div_ick: dsp_div_ick {
+	dsp_div_ick: dsp_div_ick@840 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&dsp_fck>;
@@ -65,7 +65,7 @@
 		clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
 	};
 
-	iva1_gate_ifck: iva1_gate_ifck {
+	iva1_gate_ifck: iva1_gate_ifck@800 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&core_ck>;
@@ -73,7 +73,7 @@
 		reg = <0x0800>;
 	};
 
-	iva1_div_ifck: iva1_div_ifck {
+	iva1_div_ifck: iva1_div_ifck@840 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&core_ck>;
@@ -96,7 +96,7 @@
 		clock-div = <2>;
 	};
 
-	iva1_mpu_int_ifck: iva1_mpu_int_ifck {
+	iva1_mpu_int_ifck: iva1_mpu_int_ifck@800 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&iva1_ifck_div>;
@@ -104,7 +104,7 @@
 		reg = <0x0800>;
 	};
 
-	wdt3_ick: wdt3_ick {
+	wdt3_ick: wdt3_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -112,7 +112,7 @@
 		reg = <0x0210>;
 	};
 
-	wdt3_fck: wdt3_fck {
+	wdt3_fck: wdt3_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -120,7 +120,7 @@
 		reg = <0x0200>;
 	};
 
-	mmc_ick: mmc_ick {
+	mmc_ick: mmc_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -128,7 +128,7 @@
 		reg = <0x0210>;
 	};
 
-	mmc_fck: mmc_fck {
+	mmc_fck: mmc_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_96m_ck>;
@@ -136,7 +136,7 @@
 		reg = <0x0200>;
 	};
 
-	eac_ick: eac_ick {
+	eac_ick: eac_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -144,7 +144,7 @@
 		reg = <0x0210>;
 	};
 
-	eac_fck: eac_fck {
+	eac_fck: eac_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_96m_ck>;
@@ -152,7 +152,7 @@
 		reg = <0x0200>;
 	};
 
-	i2c1_fck: i2c1_fck {
+	i2c1_fck: i2c1_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_12m_ck>;
@@ -160,7 +160,7 @@
 		reg = <0x0200>;
 	};
 
-	i2c2_fck: i2c2_fck {
+	i2c2_fck: i2c2_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_12m_ck>;
@@ -168,7 +168,7 @@
 		reg = <0x0200>;
 	};
 
-	vlynq_ick: vlynq_ick {
+	vlynq_ick: vlynq_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l3_ck>;
@@ -176,7 +176,7 @@
 		reg = <0x0210>;
 	};
 
-	vlynq_gate_fck: vlynq_gate_fck {
+	vlynq_gate_fck: vlynq_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&core_ck>;
@@ -192,7 +192,7 @@
 		clock-div = <18>;
 	};
 
-	vlynq_mux_fck: vlynq_mux_fck {
+	vlynq_mux_fck: vlynq_mux_fck@240 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index c9f1e93a9..db95aadcc 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -7,11 +7,11 @@
 	};
 
 	ocp {
-		i2c@0 {
+		i2c0 {
 			compatible = "i2c-cbus-gpio";
-			gpios = <&gpio3 2 0 /* gpio66 clk */
-				 &gpio3 1 0 /* gpio65 dat */
-				 &gpio3 0 0 /* gpio64 sel */
+			gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
+				 &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
+				 &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
 				>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 5b9a376cc..fb712b9aa 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -130,6 +130,10 @@
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		mcbsp1: mcbsp@48074000 {
diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi
index 93fed6883..a5aa7d619 100644
--- a/arch/arm/boot/dts/omap2430-clocks.dtsi
+++ b/arch/arm/boot/dts/omap2430-clocks.dtsi
@@ -9,7 +9,7 @@
  */
 
 &scm_clocks {
-	mcbsp3_mux_fck: mcbsp3_mux_fck {
+	mcbsp3_mux_fck: mcbsp3_mux_fck@78 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
@@ -22,7 +22,7 @@
 		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
 	};
 
-	mcbsp4_mux_fck: mcbsp4_mux_fck {
+	mcbsp4_mux_fck: mcbsp4_mux_fck@78 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
@@ -36,7 +36,7 @@
 		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
 	};
 
-	mcbsp5_mux_fck: mcbsp5_mux_fck {
+	mcbsp5_mux_fck: mcbsp5_mux_fck@78 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
@@ -52,7 +52,7 @@
 };
 
 &prcm_clocks {
-	iva2_1_gate_ick: iva2_1_gate_ick {
+	iva2_1_gate_ick: iva2_1_gate_ick@800 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&dsp_fck>;
@@ -60,7 +60,7 @@
 		reg = <0x0800>;
 	};
 
-	iva2_1_div_ick: iva2_1_div_ick {
+	iva2_1_div_ick: iva2_1_div_ick@840 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&dsp_fck>;
@@ -76,7 +76,7 @@
 		clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
 	};
 
-	mdm_gate_ick: mdm_gate_ick {
+	mdm_gate_ick: mdm_gate_ick@c10 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-interface-clock";
 		clocks = <&core_ck>;
@@ -84,7 +84,7 @@
 		reg = <0x0c10>;
 	};
 
-	mdm_div_ick: mdm_div_ick {
+	mdm_div_ick: mdm_div_ick@c40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&core_ck>;
@@ -98,7 +98,7 @@
 		clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
 	};
 
-	mdm_osc_ck: mdm_osc_ck {
+	mdm_osc_ck: mdm_osc_ck@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&osc_ck>;
@@ -106,7 +106,7 @@
 		reg = <0x0c00>;
 	};
 
-	mcbsp3_ick: mcbsp3_ick {
+	mcbsp3_ick: mcbsp3_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -114,7 +114,7 @@
 		reg = <0x0214>;
 	};
 
-	mcbsp3_gate_fck: mcbsp3_gate_fck {
+	mcbsp3_gate_fck: mcbsp3_gate_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -122,7 +122,7 @@
 		reg = <0x0204>;
 	};
 
-	mcbsp4_ick: mcbsp4_ick {
+	mcbsp4_ick: mcbsp4_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -130,7 +130,7 @@
 		reg = <0x0214>;
 	};
 
-	mcbsp4_gate_fck: mcbsp4_gate_fck {
+	mcbsp4_gate_fck: mcbsp4_gate_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -138,7 +138,7 @@
 		reg = <0x0204>;
 	};
 
-	mcbsp5_ick: mcbsp5_ick {
+	mcbsp5_ick: mcbsp5_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -146,7 +146,7 @@
 		reg = <0x0214>;
 	};
 
-	mcbsp5_gate_fck: mcbsp5_gate_fck {
+	mcbsp5_gate_fck: mcbsp5_gate_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -154,7 +154,7 @@
 		reg = <0x0204>;
 	};
 
-	mcspi3_ick: mcspi3_ick {
+	mcspi3_ick: mcspi3_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -162,7 +162,7 @@
 		reg = <0x0214>;
 	};
 
-	mcspi3_fck: mcspi3_fck {
+	mcspi3_fck: mcspi3_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_48m_ck>;
@@ -170,7 +170,7 @@
 		reg = <0x0204>;
 	};
 
-	icr_ick: icr_ick {
+	icr_ick: icr_ick@410 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&sys_ck>;
@@ -178,7 +178,7 @@
 		reg = <0x0410>;
 	};
 
-	i2chs1_fck: i2chs1_fck {
+	i2chs1_fck: i2chs1_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,omap2430-interface-clock";
 		clocks = <&func_96m_ck>;
@@ -186,7 +186,7 @@
 		reg = <0x0204>;
 	};
 
-	i2chs2_fck: i2chs2_fck {
+	i2chs2_fck: i2chs2_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,omap2430-interface-clock";
 		clocks = <&func_96m_ck>;
@@ -194,7 +194,7 @@
 		reg = <0x0204>;
 	};
 
-	usbhs_ick: usbhs_ick {
+	usbhs_ick: usbhs_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l3_ck>;
@@ -202,7 +202,7 @@
 		reg = <0x0214>;
 	};
 
-	mmchs1_ick: mmchs1_ick {
+	mmchs1_ick: mmchs1_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -210,7 +210,7 @@
 		reg = <0x0214>;
 	};
 
-	mmchs1_fck: mmchs1_fck {
+	mmchs1_fck: mmchs1_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_96m_ck>;
@@ -218,7 +218,7 @@
 		reg = <0x0204>;
 	};
 
-	mmchs2_ick: mmchs2_ick {
+	mmchs2_ick: mmchs2_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -226,7 +226,7 @@
 		reg = <0x0214>;
 	};
 
-	mmchs2_fck: mmchs2_fck {
+	mmchs2_fck: mmchs2_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_96m_ck>;
@@ -234,7 +234,7 @@
 		reg = <0x0204>;
 	};
 
-	gpio5_ick: gpio5_ick {
+	gpio5_ick: gpio5_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -242,7 +242,7 @@
 		reg = <0x0214>;
 	};
 
-	gpio5_fck: gpio5_fck {
+	gpio5_fck: gpio5_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -250,7 +250,7 @@
 		reg = <0x0204>;
 	};
 
-	mdm_intc_ick: mdm_intc_ick {
+	mdm_intc_ick: mdm_intc_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -258,7 +258,7 @@
 		reg = <0x0214>;
 	};
 
-	mmchsdb1_fck: mmchsdb1_fck {
+	mmchsdb1_fck: mmchsdb1_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -266,7 +266,7 @@
 		reg = <0x0204>;
 	};
 
-	mmchsdb2_fck: mmchsdb2_fck {
+	mmchsdb2_fck: mmchsdb2_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 2390f387c..455aaea40 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -56,14 +56,15 @@
 					reg = <0x270 0x240>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0x270 0x240>;
 
 					scm_clocks: clocks {
 						#address-cells = <1>;
 						#size-cells = <0>;
 					};
 
-					pbias_regulator: pbias_regulator {
-						compatible = "ti,pbias-omap";
+					pbias_regulator: pbias_regulator@230 {
+						compatible = "ti,pbias-omap2", "ti,pbias-omap";
 						reg = <0x230 0x4>;
 						syscon = <&scm_conf>;
 						pbias_mmc_reg: pbias_mmc_omap2430 {
@@ -153,6 +154,10 @@
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		mcbsp1: mcbsp@48074000 {
diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi
index 63965b876..769a346de 100644
--- a/arch/arm/boot/dts/omap24xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 &scm_clocks {
-	mcbsp1_mux_fck: mcbsp1_mux_fck {
+	mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
@@ -22,7 +22,7 @@
 		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
 	};
 
-	mcbsp2_mux_fck: mcbsp2_mux_fck {
+	mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_96m_ck>, <&mcbsp_clks>;
@@ -74,7 +74,7 @@
 		clock-frequency = <26000000>;
 	};
 
-	aplls_clkin_ck: aplls_clkin_ck {
+	aplls_clkin_ck: aplls_clkin_ck@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
@@ -90,7 +90,7 @@
 		clock-div = <1>;
 	};
 
-	osc_ck: osc_ck {
+	osc_ck: osc_ck@60 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
@@ -99,7 +99,7 @@
 		ti,index-starts-at-one;
 	};
 
-	sys_ck: sys_ck {
+	sys_ck: sys_ck@60 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&osc_ck>;
@@ -121,14 +121,14 @@
 		clock-frequency = <0x0>;
 	};
 
-	dpll_ck: dpll_ck {
+	dpll_ck: dpll_ck@500 {
 		#clock-cells = <0>;
 		compatible = "ti,omap2-dpll-core-clock";
 		clocks = <&sys_ck>, <&sys_ck>;
 		reg = <0x0500>, <0x0540>;
 	};
 
-	apll96_ck: apll96_ck {
+	apll96_ck: apll96_ck@500 {
 		#clock-cells = <0>;
 		compatible = "ti,omap2-apll-clock";
 		clocks = <&sys_ck>;
@@ -138,7 +138,7 @@
 		reg = <0x0500>, <0x0530>, <0x0520>;
 	};
 
-	apll54_ck: apll54_ck {
+	apll54_ck: apll54_ck@500 {
 		#clock-cells = <0>;
 		compatible = "ti,omap2-apll-clock";
 		clocks = <&sys_ck>;
@@ -148,7 +148,7 @@
 		reg = <0x0500>, <0x0530>, <0x0520>;
 	};
 
-	func_54m_ck: func_54m_ck {
+	func_54m_ck: func_54m_ck@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&apll54_ck>, <&alt_ck>;
@@ -164,7 +164,7 @@
 		clock-div = <1>;
 	};
 
-	func_96m_ck: func_96m_ck {
+	func_96m_ck: func_96m_ck@540 {
 		#clock-cells = <0>;
 	};
 
@@ -176,7 +176,7 @@
 		clock-div = <2>;
 	};
 
-	func_48m_ck: func_48m_ck {
+	func_48m_ck: func_48m_ck@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&apll96_d2_ck>, <&alt_ck>;
@@ -192,7 +192,7 @@
 		clock-div = <4>;
 	};
 
-	sys_clkout_src_gate: sys_clkout_src_gate {
+	sys_clkout_src_gate: sys_clkout_src_gate@70 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&core_ck>;
@@ -200,7 +200,7 @@
 		reg = <0x0070>;
 	};
 
-	sys_clkout_src_mux: sys_clkout_src_mux {
+	sys_clkout_src_mux: sys_clkout_src_mux@70 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
@@ -213,7 +213,7 @@
 		clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
 	};
 
-	sys_clkout: sys_clkout {
+	sys_clkout: sys_clkout@70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkout_src>;
@@ -223,7 +223,7 @@
 		ti,index-power-of-two;
 	};
 
-	emul_ck: emul_ck {
+	emul_ck: emul_ck@78 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_54m_ck>;
@@ -231,7 +231,7 @@
 		reg = <0x0078>;
 	};
 
-	mpu_ck: mpu_ck {
+	mpu_ck: mpu_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&core_ck>;
@@ -240,7 +240,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dsp_gate_fck: dsp_gate_fck {
+	dsp_gate_fck: dsp_gate_fck@800 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&core_ck>;
@@ -248,7 +248,7 @@
 		reg = <0x0800>;
 	};
 
-	dsp_div_fck: dsp_div_fck {
+	dsp_div_fck: dsp_div_fck@840 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&core_ck>;
@@ -261,7 +261,7 @@
 		clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
 	};
 
-	core_l3_ck: core_l3_ck {
+	core_l3_ck: core_l3_ck@240 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&core_ck>;
@@ -270,7 +270,7 @@
 		ti,index-starts-at-one;
 	};
 
-	gfx_3d_gate_fck: gfx_3d_gate_fck {
+	gfx_3d_gate_fck: gfx_3d_gate_fck@300 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&core_l3_ck>;
@@ -278,7 +278,7 @@
 		reg = <0x0300>;
 	};
 
-	gfx_3d_div_fck: gfx_3d_div_fck {
+	gfx_3d_div_fck: gfx_3d_div_fck@340 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&core_l3_ck>;
@@ -293,7 +293,7 @@
 		clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
 	};
 
-	gfx_2d_gate_fck: gfx_2d_gate_fck {
+	gfx_2d_gate_fck: gfx_2d_gate_fck@300 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&core_l3_ck>;
@@ -301,7 +301,7 @@
 		reg = <0x0300>;
 	};
 
-	gfx_2d_div_fck: gfx_2d_div_fck {
+	gfx_2d_div_fck: gfx_2d_div_fck@340 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&core_l3_ck>;
@@ -316,7 +316,7 @@
 		clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
 	};
 
-	gfx_ick: gfx_ick {
+	gfx_ick: gfx_ick@310 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_l3_ck>;
@@ -324,7 +324,7 @@
 		reg = <0x0310>;
 	};
 
-	l4_ck: l4_ck {
+	l4_ck: l4_ck@240 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&core_l3_ck>;
@@ -334,7 +334,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dss_ick: dss_ick {
+	dss_ick: dss_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-no-wait-interface-clock";
 		clocks = <&l4_ck>;
@@ -342,7 +342,7 @@
 		reg = <0x0210>;
 	};
 
-	dss1_gate_fck: dss1_gate_fck {
+	dss1_gate_fck: dss1_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&core_ck>;
@@ -428,7 +428,7 @@
 		clock-div = <16>;
 	};
 
-	dss1_mux_fck: dss1_mux_fck {
+	dss1_mux_fck: dss1_mux_fck@240 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
@@ -442,7 +442,7 @@
 		clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
 	};
 
-	dss2_gate_fck: dss2_gate_fck {
+	dss2_gate_fck: dss2_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&func_48m_ck>;
@@ -450,7 +450,7 @@
 		reg = <0x0200>;
 	};
 
-	dss2_mux_fck: dss2_mux_fck {
+	dss2_mux_fck: dss2_mux_fck@240 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_ck>, <&func_48m_ck>;
@@ -464,7 +464,7 @@
 		clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
 	};
 
-	dss_54m_fck: dss_54m_fck {
+	dss_54m_fck: dss_54m_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_54m_ck>;
@@ -472,7 +472,7 @@
 		reg = <0x0200>;
 	};
 
-	ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck {
+	ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&core_ck>;
@@ -480,7 +480,7 @@
 		reg = <0x0204>;
 	};
 
-	ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck {
+	ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck@240 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&core_ck>;
@@ -494,7 +494,7 @@
 		clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
 	};
 
-	usb_l4_gate_ick: usb_l4_gate_ick {
+	usb_l4_gate_ick: usb_l4_gate_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-interface-clock";
 		clocks = <&core_l3_ck>;
@@ -502,7 +502,7 @@
 		reg = <0x0214>;
 	};
 
-	usb_l4_div_ick: usb_l4_div_ick {
+	usb_l4_div_ick: usb_l4_div_ick@240 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&core_l3_ck>;
@@ -517,7 +517,7 @@
 		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
 	};
 
-	ssi_l4_ick: ssi_l4_ick {
+	ssi_l4_ick: ssi_l4_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -525,7 +525,7 @@
 		reg = <0x0214>;
 	};
 
-	gpt1_ick: gpt1_ick {
+	gpt1_ick: gpt1_ick@410 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&sys_ck>;
@@ -533,7 +533,7 @@
 		reg = <0x0410>;
 	};
 
-	gpt1_gate_fck: gpt1_gate_fck {
+	gpt1_gate_fck: gpt1_gate_fck@400 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -541,7 +541,7 @@
 		reg = <0x0400>;
 	};
 
-	gpt1_mux_fck: gpt1_mux_fck {
+	gpt1_mux_fck: gpt1_mux_fck@440 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -554,7 +554,7 @@
 		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
 	};
 
-	gpt2_ick: gpt2_ick {
+	gpt2_ick: gpt2_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -562,7 +562,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt2_gate_fck: gpt2_gate_fck {
+	gpt2_gate_fck: gpt2_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -570,7 +570,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt2_mux_fck: gpt2_mux_fck {
+	gpt2_mux_fck: gpt2_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -584,7 +584,7 @@
 		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
 	};
 
-	gpt3_ick: gpt3_ick {
+	gpt3_ick: gpt3_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -592,7 +592,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt3_gate_fck: gpt3_gate_fck {
+	gpt3_gate_fck: gpt3_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -600,7 +600,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt3_mux_fck: gpt3_mux_fck {
+	gpt3_mux_fck: gpt3_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -614,7 +614,7 @@
 		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
 	};
 
-	gpt4_ick: gpt4_ick {
+	gpt4_ick: gpt4_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -622,7 +622,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt4_gate_fck: gpt4_gate_fck {
+	gpt4_gate_fck: gpt4_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -630,7 +630,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt4_mux_fck: gpt4_mux_fck {
+	gpt4_mux_fck: gpt4_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -644,7 +644,7 @@
 		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
 	};
 
-	gpt5_ick: gpt5_ick {
+	gpt5_ick: gpt5_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -652,7 +652,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt5_gate_fck: gpt5_gate_fck {
+	gpt5_gate_fck: gpt5_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -660,7 +660,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt5_mux_fck: gpt5_mux_fck {
+	gpt5_mux_fck: gpt5_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -674,7 +674,7 @@
 		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
 	};
 
-	gpt6_ick: gpt6_ick {
+	gpt6_ick: gpt6_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -682,7 +682,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt6_gate_fck: gpt6_gate_fck {
+	gpt6_gate_fck: gpt6_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -690,7 +690,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt6_mux_fck: gpt6_mux_fck {
+	gpt6_mux_fck: gpt6_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -704,7 +704,7 @@
 		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
 	};
 
-	gpt7_ick: gpt7_ick {
+	gpt7_ick: gpt7_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -712,7 +712,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt7_gate_fck: gpt7_gate_fck {
+	gpt7_gate_fck: gpt7_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -720,7 +720,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt7_mux_fck: gpt7_mux_fck {
+	gpt7_mux_fck: gpt7_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -734,7 +734,7 @@
 		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
 	};
 
-	gpt8_ick: gpt8_ick {
+	gpt8_ick: gpt8_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -742,7 +742,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt8_gate_fck: gpt8_gate_fck {
+	gpt8_gate_fck: gpt8_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -750,7 +750,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt8_mux_fck: gpt8_mux_fck {
+	gpt8_mux_fck: gpt8_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -764,7 +764,7 @@
 		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
 	};
 
-	gpt9_ick: gpt9_ick {
+	gpt9_ick: gpt9_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -772,7 +772,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt9_gate_fck: gpt9_gate_fck {
+	gpt9_gate_fck: gpt9_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -780,7 +780,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt9_mux_fck: gpt9_mux_fck {
+	gpt9_mux_fck: gpt9_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -794,7 +794,7 @@
 		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
 	};
 
-	gpt10_ick: gpt10_ick {
+	gpt10_ick: gpt10_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -802,7 +802,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt10_gate_fck: gpt10_gate_fck {
+	gpt10_gate_fck: gpt10_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -810,7 +810,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt10_mux_fck: gpt10_mux_fck {
+	gpt10_mux_fck: gpt10_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -824,7 +824,7 @@
 		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
 	};
 
-	gpt11_ick: gpt11_ick {
+	gpt11_ick: gpt11_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -832,7 +832,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt11_gate_fck: gpt11_gate_fck {
+	gpt11_gate_fck: gpt11_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -840,7 +840,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt11_mux_fck: gpt11_mux_fck {
+	gpt11_mux_fck: gpt11_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -854,7 +854,7 @@
 		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
 	};
 
-	gpt12_ick: gpt12_ick {
+	gpt12_ick: gpt12_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -862,7 +862,7 @@
 		reg = <0x0210>;
 	};
 
-	gpt12_gate_fck: gpt12_gate_fck {
+	gpt12_gate_fck: gpt12_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -870,7 +870,7 @@
 		reg = <0x0200>;
 	};
 
-	gpt12_mux_fck: gpt12_mux_fck {
+	gpt12_mux_fck: gpt12_mux_fck@244 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
@@ -884,7 +884,7 @@
 		clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
 	};
 
-	mcbsp1_ick: mcbsp1_ick {
+	mcbsp1_ick: mcbsp1_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -892,7 +892,7 @@
 		reg = <0x0210>;
 	};
 
-	mcbsp1_gate_fck: mcbsp1_gate_fck {
+	mcbsp1_gate_fck: mcbsp1_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -900,7 +900,7 @@
 		reg = <0x0200>;
 	};
 
-	mcbsp2_ick: mcbsp2_ick {
+	mcbsp2_ick: mcbsp2_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -908,7 +908,7 @@
 		reg = <0x0210>;
 	};
 
-	mcbsp2_gate_fck: mcbsp2_gate_fck {
+	mcbsp2_gate_fck: mcbsp2_gate_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -916,7 +916,7 @@
 		reg = <0x0200>;
 	};
 
-	mcspi1_ick: mcspi1_ick {
+	mcspi1_ick: mcspi1_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -924,7 +924,7 @@
 		reg = <0x0210>;
 	};
 
-	mcspi1_fck: mcspi1_fck {
+	mcspi1_fck: mcspi1_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_48m_ck>;
@@ -932,7 +932,7 @@
 		reg = <0x0200>;
 	};
 
-	mcspi2_ick: mcspi2_ick {
+	mcspi2_ick: mcspi2_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -940,7 +940,7 @@
 		reg = <0x0210>;
 	};
 
-	mcspi2_fck: mcspi2_fck {
+	mcspi2_fck: mcspi2_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_48m_ck>;
@@ -948,7 +948,7 @@
 		reg = <0x0200>;
 	};
 
-	uart1_ick: uart1_ick {
+	uart1_ick: uart1_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -956,7 +956,7 @@
 		reg = <0x0210>;
 	};
 
-	uart1_fck: uart1_fck {
+	uart1_fck: uart1_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_48m_ck>;
@@ -964,7 +964,7 @@
 		reg = <0x0200>;
 	};
 
-	uart2_ick: uart2_ick {
+	uart2_ick: uart2_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -972,7 +972,7 @@
 		reg = <0x0210>;
 	};
 
-	uart2_fck: uart2_fck {
+	uart2_fck: uart2_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_48m_ck>;
@@ -980,7 +980,7 @@
 		reg = <0x0200>;
 	};
 
-	uart3_ick: uart3_ick {
+	uart3_ick: uart3_ick@214 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -988,7 +988,7 @@
 		reg = <0x0214>;
 	};
 
-	uart3_fck: uart3_fck {
+	uart3_fck: uart3_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_48m_ck>;
@@ -996,7 +996,7 @@
 		reg = <0x0204>;
 	};
 
-	gpios_ick: gpios_ick {
+	gpios_ick: gpios_ick@410 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&sys_ck>;
@@ -1004,7 +1004,7 @@
 		reg = <0x0410>;
 	};
 
-	gpios_fck: gpios_fck {
+	gpios_fck: gpios_fck@400 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -1012,7 +1012,7 @@
 		reg = <0x0400>;
 	};
 
-	mpu_wdt_ick: mpu_wdt_ick {
+	mpu_wdt_ick: mpu_wdt_ick@410 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&sys_ck>;
@@ -1020,7 +1020,7 @@
 		reg = <0x0410>;
 	};
 
-	mpu_wdt_fck: mpu_wdt_fck {
+	mpu_wdt_fck: mpu_wdt_fck@400 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -1028,7 +1028,7 @@
 		reg = <0x0400>;
 	};
 
-	sync_32k_ick: sync_32k_ick {
+	sync_32k_ick: sync_32k_ick@410 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&sys_ck>;
@@ -1036,7 +1036,7 @@
 		reg = <0x0410>;
 	};
 
-	wdt1_ick: wdt1_ick {
+	wdt1_ick: wdt1_ick@410 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&sys_ck>;
@@ -1044,7 +1044,7 @@
 		reg = <0x0410>;
 	};
 
-	omapctrl_ick: omapctrl_ick {
+	omapctrl_ick: omapctrl_ick@410 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&sys_ck>;
@@ -1052,7 +1052,7 @@
 		reg = <0x0410>;
 	};
 
-	cam_fck: cam_fck {
+	cam_fck: cam_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_96m_ck>;
@@ -1060,7 +1060,7 @@
 		reg = <0x0200>;
 	};
 
-	cam_ick: cam_ick {
+	cam_ick: cam_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-no-wait-interface-clock";
 		clocks = <&l4_ck>;
@@ -1068,7 +1068,7 @@
 		reg = <0x0210>;
 	};
 
-	mailboxes_ick: mailboxes_ick {
+	mailboxes_ick: mailboxes_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1076,7 +1076,7 @@
 		reg = <0x0210>;
 	};
 
-	wdt4_ick: wdt4_ick {
+	wdt4_ick: wdt4_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1084,7 +1084,7 @@
 		reg = <0x0210>;
 	};
 
-	wdt4_fck: wdt4_fck {
+	wdt4_fck: wdt4_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_32k_ck>;
@@ -1092,7 +1092,7 @@
 		reg = <0x0200>;
 	};
 
-	mspro_ick: mspro_ick {
+	mspro_ick: mspro_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1100,7 +1100,7 @@
 		reg = <0x0210>;
 	};
 
-	mspro_fck: mspro_fck {
+	mspro_fck: mspro_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_96m_ck>;
@@ -1108,7 +1108,7 @@
 		reg = <0x0200>;
 	};
 
-	fac_ick: fac_ick {
+	fac_ick: fac_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1116,7 +1116,7 @@
 		reg = <0x0210>;
 	};
 
-	fac_fck: fac_fck {
+	fac_fck: fac_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_12m_ck>;
@@ -1124,7 +1124,7 @@
 		reg = <0x0200>;
 	};
 
-	hdq_ick: hdq_ick {
+	hdq_ick: hdq_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1132,7 +1132,7 @@
 		reg = <0x0210>;
 	};
 
-	hdq_fck: hdq_fck {
+	hdq_fck: hdq_fck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_12m_ck>;
@@ -1140,7 +1140,7 @@
 		reg = <0x0200>;
 	};
 
-	i2c1_ick: i2c1_ick {
+	i2c1_ick: i2c1_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1148,7 +1148,7 @@
 		reg = <0x0210>;
 	};
 
-	i2c2_ick: i2c2_ick {
+	i2c2_ick: i2c2_ick@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1156,7 +1156,7 @@
 		reg = <0x0210>;
 	};
 
-	gpmc_fck: gpmc_fck {
+	gpmc_fck: gpmc_fck@238 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
 		clocks = <&core_l3_ck>;
@@ -1174,7 +1174,7 @@
 		clock-div = <1>;
 	};
 
-	sdma_ick: sdma_ick {
+	sdma_ick: sdma_ick@238 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
 		clocks = <&core_l3_ck>;
@@ -1184,7 +1184,7 @@
 		ti,clock-mult = <1>;
 	};
 
-	sdrc_ick: sdrc_ick {
+	sdrc_ick: sdrc_ick@238 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
 		clocks = <&core_l3_ck>;
@@ -1194,7 +1194,7 @@
 		ti,clock-mult = <1>;
 	};
 
-	des_ick: des_ick {
+	des_ick: des_ick@21c {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1202,7 +1202,7 @@
 		reg = <0x021c>;
 	};
 
-	sha_ick: sha_ick {
+	sha_ick: sha_ick@21c {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1210,7 +1210,7 @@
 		reg = <0x021c>;
 	};
 
-	rng_ick: rng_ick {
+	rng_ick: rng_ick@21c {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1218,7 +1218,7 @@
 		reg = <0x021c>;
 	};
 
-	aes_ick: aes_ick {
+	aes_ick: aes_ick@21c {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1226,7 +1226,7 @@
 		reg = <0x021c>;
 	};
 
-	pka_ick: pka_ick {
+	pka_ick: pka_ick@21c {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l4_ck>;
@@ -1234,7 +1234,7 @@
 		reg = <0x021c>;
 	};
 
-	usb_fck: usb_fck {
+	usb_fck: usb_fck@204 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&func_48m_ck>;
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 7c4dca122..8ffde0628 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -69,7 +69,7 @@
 			label = "user";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x114>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};
@@ -80,7 +80,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
@@ -91,7 +91,7 @@
 		vcc-supply = <&hsusb2_power>;
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
 
@@ -104,7 +104,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -112,14 +112,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector0 {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -134,7 +134,7 @@
 		};
 	};
 
-	tv0: connector@1 {
+	tv0: connector1 {
 		compatible = "svideo-connector";
 		label = "tv";
 
@@ -176,18 +176,18 @@
 &omap3_pmx_wkup {
 	gpio1_pins: pinmux_gpio1_pins {
 		pinctrl-single,pins = <
-			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
 		>;
 	};
 
 	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
 		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
 		>;
 	};
 };
@@ -200,8 +200,8 @@
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index a5474113c..a19d907d4 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -55,7 +55,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
@@ -80,12 +80,12 @@
 			label = "user";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x114>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
 
@@ -99,7 +99,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -107,14 +107,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector0 {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -129,7 +129,7 @@
 		};
 	};
 
-	tv0: connector@1 {
+	tv0: connector1 {
 		compatible = "svideo-connector";
 		label = "tv";
 
@@ -171,7 +171,7 @@
 &omap3_pmx_wkup {
 	gpio1_pins: pinmux_gpio1_pins {
 		pinctrl-single,pins = <
-			0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
 		>;
 	};
 };
@@ -195,47 +195,47 @@
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x194 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
 		>;
 	};
 
 	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
 	};
 };
@@ -384,9 +384,13 @@
 
 	/* Chip select 0 */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;		/* NAND I/O window, 4 bytes */
-		interrupts = <20>;
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		ti,nand-ecc-opt = "ham1";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <16>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 4d091ca43..6a0df13fa 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -57,7 +57,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	tv0: connector@1 {
+	tv0: connector {
 		compatible = "svideo-connector";
 		label = "tv";
 
@@ -224,7 +224,7 @@
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 0>;
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
@@ -238,7 +238,7 @@
 		ti,debounce-tol = /bits/ 16 <10>;
 		ti,debounce-rep = /bits/ 16 <1>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -261,10 +261,14 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x01000000>;
+	ranges = <0 0 0x30000000 0x01000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
 		ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
new file mode 100644
index 000000000..586010179
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -0,0 +1,373 @@
+/*
+ * Author: Anil Kumar <anilk4.v@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+#include "omap34xx.dtsi"
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "devkit8000::led1";
+			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "devkit8000::led2";
+			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
+			default-state = "on";
+			linux,default-trigger = "none";
+		};
+
+		usr {
+			label = "devkit8000::led3";
+			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
+			default-state = "on";
+			linux,default-trigger = "usr";
+		};
+
+		pmu_stat {
+			label = "devkit8000::pmu_stat";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "devkit8000";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,audio-routing =
+			"Ext Spk", "PREDRIVEL",
+			"Ext Spk", "PREDRIVER",
+			"MAINMIC", "Main Mic",
+			"Main Mic", "Mic Bias 1";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_EXTRA>;
+			wakeup-source;
+		};
+	};
+
+	tfp410: encoder0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_dvi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c2>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/*
+	 * pulldowns:
+	 * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c6>;
+};
+
+&twl_keypad {
+	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
+			MATRIX_KEY(1, 0, KEY_2)
+			MATRIX_KEY(2, 0, KEY_3)
+			MATRIX_KEY(0, 1, KEY_4)
+			MATRIX_KEY(1, 1, KEY_5)
+			MATRIX_KEY(2, 1, KEY_6)
+			MATRIX_KEY(3, 1, KEY_F5)
+			MATRIX_KEY(0, 2, KEY_7)
+			MATRIX_KEY(1, 2, KEY_8)
+			MATRIX_KEY(2, 2, KEY_9)
+			MATRIX_KEY(3, 2, KEY_F6)
+			MATRIX_KEY(0, 3, KEY_F7)
+			MATRIX_KEY(1, 3, KEY_0)
+			MATRIX_KEY(2, 3, KEY_F8)
+			MATRIX_KEY(4, 5, KEY_RESERVED)
+			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
+			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)
+			>;
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;       /* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "sw";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "File System";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <6 0 0x2c000000 0x1000000>;       /* CS6: 16MB for DM9000 */
+
+	ethernet@0,0 {
+		compatible = "davicom,dm9000";
+		reg =  <6 0x000 2
+			6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+		bank-width = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+		davicom,no-eeprom;
+
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <1>;
+		gpmc,wait-pin = <0>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+
+		gpmc,cs-on-ns = <6>;
+		gpmc,cs-rd-off-ns = <180>;
+		gpmc,cs-wr-off-ns = <180>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <18>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <144>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <90>;
+		gpmc,cycle2cycle-delay-ns = <90>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+	};
+};
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+&vpll1 {
+	/* Needed for DSS */
+	regulator-name = "vdds_dsi";
+
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	vdds_dsi-supply = <&vpll1>;
+	vdda_dac-supply = <&vdac>;
+
+	port {
+		dpi_dvi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
new file mode 100644
index 000000000..2d64bcffa
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-devkit8000-common.dtsi"
+/ {
+	aliases {
+		display0 = &lcd0;
+		display1 = &dvi0;
+		display2 = &tv0;
+	};
+
+	lcd0: display {
+		compatible = "panel-dpi";
+		label = "lcd";
+
+		enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_lcd_out>;
+			};
+		};
+	};
+};
+
+&dss {
+	port {
+		dpi_lcd_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&vio {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcspi2 {
+
+	/* touch controller */
+	ads7846@0 {
+		compatible = "ti,ads7846";
+		vcc-supply = <&vio>;
+
+		reg = <0>;			/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 0>;		/* gpio_27 */
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,debounce-max = /bits/ 16 <10>;
+		ti,debounce-tol = /bits/ 16 <5>;
+		ti,debounce-rep = /bits/ 16 <1>;
+		ti,keep-vref-on = <1>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
new file mode 100644
index 000000000..d8b16398b
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
@@ -0,0 +1,37 @@
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/*
+ * 4.3'' LCD panel sold with devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+	model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
+	compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+	lcd0: display {
+		panel-timing {
+			clock-frequency = <10164705>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <2>;
+			hback-porch = <2>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <2>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
new file mode 100644
index 000000000..edb37ba80
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
@@ -0,0 +1,37 @@
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/*
+ * 7.0'' LCD panel sold with some devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+	model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
+	compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+	lcd0: display {
+		panel-timing {
+			clock-frequency = <40000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <1>;
+			hback-porch = <1>;
+			hsync-len = <48>;
+			vback-porch = <25>;
+			vfront-porch = <12>;
+			vsync-len = <3>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index be2297116..40ac89482 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -1,5 +1,5 @@
 /*
- * Author: Anil Kumar <anilk4.v@gmail.com>
+ * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -7,194 +7,13 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap3-devkit8000-common.dtsi"
 / {
 	model = "TimLL OMAP3 Devkit8000";
 	compatible = "timll,omap3-devkit8000", "ti,omap3";
 
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			label = "devkit8000::led1";
-			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "devkit8000::led2";
-			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
-			default-state = "on";
-			linux,default-trigger = "none";
-		};
-
-		usr {
-			label = "devkit8000::led3";
-			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
-			default-state = "on";
-			linux,default-trigger = "usr";
-                };
-
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "devkit8000";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,audio-routing =
-			"Ext Spk", "PREDRIVEL",
-			"Ext Spk", "PREDRIVER",
-			"MAINMIC", "Main Mic",
-			"Main Mic", "Mic Bias 1";
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&wdt2 {
-	status = "disabled";
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>;       /* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "sw";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		x-loader@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		bootloaders_env@260000 {
-			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
-		};
-
-		kernel@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x400000>;
-		};
-
-		filesystem@680000 {
-			label = "File System";
-			reg = <0x680000 0xf980000>;
-		};
-	};
-};
-
-&gpmc {
-	ranges = <6 0 0x2c000000 0x1000000>;       /* CS6: 16MB for DM9000 */
-
-	ethernet@0,0 {
-		compatible = "davicom,dm9000";
-		reg =  <6 0x000 2
-			6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
-		bank-width = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
-		davicom,no-eeprom;
-
-		gpmc,mux-add-data = <0>;
-		gpmc,device-width = <1>;
-		gpmc,wait-pin = <0>;
-		gpmc,cycle2cycle-samecsen = <1>;
-		gpmc,cycle2cycle-diffcsen = <1>;
-
-		gpmc,cs-on-ns = <6>;
-		gpmc,cs-rd-off-ns = <180>;
-		gpmc,cs-wr-off-ns = <180>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <144>;
-		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <90>;
-		gpmc,cycle2cycle-delay-ns = <90>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,wr-access-ns = <0>;
+	aliases {
+		display1 = &dvi0;
+		display2 = &tv0;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 16e8ce350..ed449827c 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "TI OMAP37XX EVM (TMDSEVM3730)";
-	compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
 
 	memory {
 		device_type = "memory";
@@ -66,48 +66,48 @@
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
-			0x120 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
-			0x122 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
-			0x124 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
-			0x126 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
 		>;
 	};
 
 	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x150 (PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
-			0x14e (PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
 		>;
 	};
 
 	smsc911x_pins: pinmux_smsc911x_pins {
 		pinctrl-single,pins = <
-			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
 	};
 };
@@ -115,12 +115,12 @@
 &omap3_pmx_wkup {
 	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
 		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
 		>;
 	};
 };
@@ -154,12 +154,16 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x1000000>,	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0: 16MB for NAND */
 		 <5 0 0x2c000000 0x01000000>;
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		linux,mtd-name= "hynix,h8kds0un0mer-4em";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index b2589f96d..090475083 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -26,7 +26,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 22 0>;	/* gpio150 */
+		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 		vin-supply = <&vmmc2>;
@@ -91,7 +91,7 @@
 	tsc2046@0 {
 		interrupt-parent = <&gpio6>;
 		interrupts = <15 0>;		/* gpio175 */
-		pendown-gpio = <&gpio6 15 0>;
+		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 7166d8876..c09a0574a 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -37,7 +37,7 @@
 			label = "aux";
 			linux,code = <169>;
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -77,10 +77,10 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi_gpio_pins>;
 
-		gpio-sck = <&gpio1 12 0>;
-		gpio-miso = <&gpio1 18 0>;
-		gpio-mosi = <&gpio1 20 0>;
-		cs-gpios = <&gpio1 19 0>;
+		gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
 		/* lcd panel */
@@ -100,12 +100,28 @@
 		};
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm11 0 2000000 0>;
+		pwm-names = "backlight";
+		brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <9>;	/* => 90 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+	};
+
+	pwm11: dmtimer-pwm {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer11>;
+		#pwm-cells = <3>;
+	};
+
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	};
 
-	tv0: connector@1 {
+	tv0: connector {
 		compatible = "svideo-connector";
 		label = "tv";
 
@@ -118,7 +134,7 @@
 
 	tv_amp: opa362 {
 		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 0>;
+		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 
 		ports {
 			#address-cells = <1>;
@@ -126,19 +142,24 @@
 
 			port@0 {
 				reg = <0>;
-				opa_in: endpoint@0 {
+				opa_in: endpoint {
 					remote-endpoint = <&venc_out>;
 				};
 			};
 
 			port@1 {
 				reg = <1>;
-				opa_out: endpoint@0 {
+				opa_out: endpoint {
 					remote-endpoint = <&tv_connector_in>;
 				};
 			};
 		};
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;	/* W2CBW003 reset through tca6507 */
+	};
 };
 
 &omap3_pmx_core {
@@ -190,6 +211,12 @@
 		>;
 	};
 
+	backlight_pins: backlight_pins_pimnux {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)		/* gpt11/gpio57 */
+		>;
+	};
+
 	dss_dpi_pins: pinmux_dss_dpi_pins {
                pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
@@ -228,6 +255,24 @@
 			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
 		>;
 	};
+
+	bma180_pins: pinmux_bma180_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
+		>;
+	};
+
+	itg3200_pins: pinmux_itg3200_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
+		>;
+	};
+
+	hmc5843_pins: pinmux_hmc5843_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -298,6 +343,8 @@
 	bma180@41 {
 		compatible = "bosch,bma180";
 		reg = <0x41>;
+		pinctrl-names = "default";
+		pintcrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
@@ -306,12 +353,14 @@
 	itg3200@68 {
 		compatible = "invensense,itg3200";
 		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&itg3200_pins>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <24 0>; /* GPIO_56 */
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
 	};
 
-	/* leds */
-	tca6507@45 {
+	/* leds + gpios */
+	tca6507: tca6507@45 {
 		compatible = "ti,tca6507";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -351,6 +400,10 @@
 	hmc5843@1e {
 		compatible = "honeywell,hmc5883l";
 		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hmc5843_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;	/* gpio112 */
 	};
 
 	/* touchscreen */
@@ -362,6 +415,12 @@
 		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <600>;
 	};
+
+	/* RFID EEPROM */
+	m24lr64@50 {
+		compatible = "at,24c64";
+		reg = <0x50>;
+	};
 };
 
 &i2c3 {
@@ -398,6 +457,7 @@
 	bus-width = <4>;
 	ti,non-removable;
 	cap-power-off-card;
+	mmc-pwrseq = <&wifi_pwrseq>;
 };
 
 &mmc3 {
@@ -492,7 +552,11 @@
 	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
 
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index 52b386f68..600b6ca5a 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -12,6 +12,6 @@
 	model = "Goldelico GTA04A5";
 
 	sound {
-		ti,jack-det-gpio = <&twl_gpio 2 0>;    /* GTA04A5 only */
+		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;    /* GTA04A5 only */
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts
index 11aa28d73..60af7c235 100644
--- a/arch/arm/boot/dts/omap3-ha-lcd.dts
+++ b/arch/arm/boot/dts/omap3-ha-lcd.dts
@@ -121,7 +121,7 @@
 		display0 = &lcd0;
 	};
 
-	lcd0: display@0 {
+	lcd0: display {
 		compatible = "panel-dpi";
 		label = "lcd";
 
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index d5e5cd449..f4f2ce46d 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -1,7 +1,7 @@
 /*
  * Common device tree for IGEP boards based on AM/DM37x
  *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -18,6 +18,10 @@
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
+	chosen {
+		stdout-path = &uart3;
+	};
+
 	sound {
 		compatible = "ti,omap-twl4030";
 		ti,model = "igep2";
@@ -35,74 +39,72 @@
 &omap3_pmx_core {
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
-			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)	/* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)	/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx.uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx.uart3_tx */
 		>;
 	};
 
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
-			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
-			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
-			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	smsc9221_pins: pinmux_smsc9221_pins {
-		pinctrl-single,pins = <
-			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
-			0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
-			0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
 		>;
 	};
 };
 
 &gpmc {
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		linux,mtd-name= "micron,mt29c4g96maz";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
@@ -161,7 +163,7 @@
 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {
-			      };
+			};
 		};
 	};
 };
@@ -181,11 +183,12 @@
 };
 
 &mmc1 {
-      pinctrl-names = "default";
-      pinctrl-0 = <&mmc1_pins>;
-      vmmc-supply = <&vmmc1>;
-      vmmc_aux-supply = <&vsim>;
-      bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
 };
 
 &mmc3 {
@@ -193,13 +196,13 @@
 };
 
 &uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 };
 
 &uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
 };
 
 &twl_gpio {
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index e458c2185..667f96245 100644
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -1,7 +1,7 @@
 /*
  * Common Device Tree Source for IGEPv2
  *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -60,7 +60,7 @@
 		vcc-supply = <&hsusb1_power>;
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
 
@@ -71,7 +71,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -79,14 +79,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -111,40 +111,40 @@
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
 		>;
 	};
 
 	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
 	};
 
@@ -156,6 +156,12 @@
 			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
 		>;
 	};
+
+	smsc9221_pins: pinmux_smsc9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs2.gpio_176 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -188,6 +194,12 @@
 			OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
 		>;
 	};
+
+	mmc1_wp_pins: pinmux_mmc1_cd_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4)   /* etk_d15.gpio_29 */
+		>;
+	};
 };
 
 &i2c3 {
@@ -204,8 +216,8 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>,
-		 <5 0 0x2c000000 0x01000000>;
+	ranges = <0 0 0x30000000 0x01000000>,	/* CS0: 16MB for NAND */
+		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for ethernet */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
@@ -244,3 +256,8 @@
 		};
 	};
 };
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;	/* gpio_29 */
+};
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 72f7cdc09..321c2b7a4 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
  *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index fea7f7edb..33d6b4ead 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
  *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -15,25 +15,17 @@
 	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
 
-	/* Regulator to trigger the WIFI_PDN signal of the Wifi module */
-	lbee1usjyc_pdn: lbee1usjyc_pdn {
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc-pdn";
+		regulator-name = "vmmcsdio_fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 - WIFI_PDN */
-		startup-delay-us = <10000>;
-		enable-active-high;
 	};
 
-	/* Regulator to trigger the RESET_N_W signal of the Wifi module */
-	lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc-reset-n-w";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 - RESET_N_W */
-		enable-active-high;
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
+			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
 	};
 };
 
@@ -45,23 +37,14 @@
 			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
 		>;
 	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
-		>;
-	};
 };
 
 /* On board Wifi module */
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
-	vmmc-supply = <&lbee1usjyc_pdn>;
-	vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 };
diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
index 0cb1527c3..e94d94274 100644
--- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
@@ -1,7 +1,7 @@
 /*
  * Common Device Tree Source for IGEP COM MODULE
  *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -33,9 +33,28 @@
 			 default-state = "off";
 		};
 	};
+
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;		/* gpio_54 */
+	};
 };
 
 &omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
@@ -47,6 +66,20 @@
 };
 
 &omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_core2_pins>;
+
+	hsusb2_core2_pins: pinmux_hsusb2_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		      /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		      /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
 	leds_core2_pins: pinmux_leds_core2_pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)	/* etk_d2.gpio_16 */
@@ -54,7 +87,19 @@
 	};
 };
 
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 };
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x01000000>;   /* CS0: 16MB for NAND */
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index b899e3418..76dc08868 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
  *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 8150f47cc..55b0cc4f5 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
  *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -15,25 +15,17 @@
 	model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
 
-	/* Regulator to trigger the WIFI_PDN signal of the Wifi module */
-	lbee1usjyc_pdn: lbee1usjyc_pdn {
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc-pdn";
+		regulator-name = "vmmcsdio_fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 - WIFI_PDN */
-		startup-delay-us = <10000>;
-		enable-active-high;
 	};
 
-	/* Regulator to trigger the RESET_N_W signal of the Wifi module */
-	lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc-reset-n-w";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 - RESET_N_W */
-		enable-active-high;
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
+			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
 	};
 };
 
@@ -62,8 +54,8 @@
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
-	vmmc-supply = <&lbee1usjyc_pdn>;
-	vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 };
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index bd6e6769c..2f353dadf 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -35,74 +35,78 @@
 			label = "enter";
 			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
 			linux,code = <KEY_ENTER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_f1 {
 			label = "f1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
 			linux,code = <KEY_F1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_f2 {
 			label = "f2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
 			linux,code = <KEY_F2>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_f3 {
 			label = "f3";
 			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
 			linux,code = <KEY_F3>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_f4 {
 			label = "f4";
 			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
 			linux,code = <KEY_F4>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_left {
 			label = "left";
 			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
 			linux,code = <KEY_LEFT>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_right {
 			label = "right";
 			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
 			linux,code = <KEY_RIGHT>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_up {
 			label = "up";
 			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_down {
 			label = "down";
 			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x01000000>,
-		 <1 0 0x08000000 0x01000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 space, 16MB */
+		 <1 0 0x08000000 0x1000000>;	/* CS1 space, 16MB */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		linux,mtd-name= "micron,nand";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
@@ -200,7 +204,7 @@
 	tsc2046@0 {
 		interrupt-parent = <&gpio2>;
 		interrupts = <22 0>;		/* gpio54 */
-		pendown-gpio = <&gpio2 22 0>;
+		pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -224,32 +228,32 @@
 &omap3_pmx_core {
 	gpio_key_pins: pinmux_gpio_key_pins {
 		pinctrl-single,pins = <
-			0xea (PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
-			0xec (PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
-			0xee (PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
-			0xf0 (PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
-			0xf2 (PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
-			0xf4 (PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
-			0xf6 (PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
-			0xf8 (PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
-			0xfa (PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
 		>;
 	};
 
 	musb_pins: pinmux_musb_pins {
 		pinctrl-single,pins = <
-			0x172 (PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			0x17a (PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			0x17c (PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			0x17e (PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			0x180 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			0x182 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			0x184 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			0x186 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			0x188 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-			0x176 (PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			0x178 (PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index e63133304..eff816e0b 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -284,7 +284,7 @@
 };
 
 &mmc1 {
-	cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+	cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
 	cd-inverted;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
@@ -314,20 +314,20 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0>;   /* boot6 / gpio_8 */
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 0>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&reg_vcc3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;
 
-		ti,x-min = <300>;
-		ti,x-max = <3000>;
-		ti,y-min = <600>;
-		ti,y-max = <3600>;
-		ti,x-plate-ohms = <80>;
-		ti,pressure-max = <255>;
+		ti,x-min = /bits/ 16 <300>;
+		ti,x-max = /bits/ 16 <3000>;
+		ti,y-min = /bits/ 16 <600>;
+		ti,y-max = /bits/ 16 <3600>;
+		ti,x-plate-ohms = /bits/ 16 <80>;
+		ti,pressure-max = /bits/ 16 <255>;
 		ti,swap-xy;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -362,7 +362,11 @@
 		<7 0 0x15000000 0x01000000>;
 
 	nand@0,0 {
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
 		/* no elm on omap3 */
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
index 834f7c65f..0e3c9812f 100644
--- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -114,8 +114,8 @@
 	status = "okay";
 	bus-width = <4>;
 	vmmc-supply = <&vmmc1>;
-	cd-gpios = <&gpio6 4 0>;   /* gpio_164 */
-	wp-gpios = <&gpio6 3 0>;   /* gpio_163 */
+	cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;   /* gpio_164 */
+	wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;   /* gpio_163 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	ti,dual-volt;
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index f2e213931..b9e58c536 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -53,3 +53,21 @@
 		};
 	};
 };
+
+&modem {
+	compatible = "nokia,n9-modem";
+};
+
+&lis302 {
+	st,axis-x = <1>;    /* LIS3_DEV_X */
+	st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
+	st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+	st,min-limit-x = <(-46)>;
+	st,min-limit-y = <3>;
+	st,min-limit-z = <3>;
+
+	st,max-limit-x = <(-3)>;
+	st,max-limit-y = <46>;
+	st,max-limit-z = <46>;
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 5f5e0f3d5..2a6078a84 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -65,50 +65,51 @@
 		camera_lens_cover {
 			label = "Camera Lens Cover";
 			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
-			gpio-key,wakeup;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_CAMERA_LENS_COVER>;
+			linux,can-disable;
 		};
 
 		camera_focus {
 			label = "Camera Focus";
 			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
-			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
-			gpio-key,wakeup;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			linux,can-disable;
 		};
 
 		camera_capture {
 			label = "Camera Capture";
 			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
-			linux,code = <0xd4>; /* KEY_CAMERA */
-			gpio-key,wakeup;
+			linux,code = <KEY_CAMERA>;
+			linux,can-disable;
 		};
 
 		lock_button {
 			label = "Lock Button";
 			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
-			linux,code = <0x98>; /* KEY_SCREENLOCK */
-			gpio-key,wakeup;
+			linux,code = <KEY_SCREENLOCK>;
+			linux,can-disable;
 		};
 
 		keypad_slide {
 			label = "Keypad Slide";
 			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
-			gpio-key,wakeup;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			linux,can-disable;
 		};
 
 		proximity_sensor {
 			label = "Proximity Sensor";
 			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_FRONT_PROXIMITY>;
+			linux,can-disable;
 		};
 	};
 
-	isp1704: isp1704 {
-		compatible = "nxp,isp1704";
+	isp1707: isp1707 {
+		compatible = "nxp,isp1707";
 		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 		usb-phy = <&usb2_phy>;
 	};
@@ -142,6 +143,18 @@
 		io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
 		io-channel-names = "temp", "bsi", "vbat";
 	};
+
+	pwm9: dmtimer-pwm {
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x00>; /* timer_sys_ck */
+	};
+
+	ir: n900-ir {
+		compatible = "nokia,n900-ir";
+		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+	};
 };
 
 &omap3_pmx_core {
@@ -149,15 +162,15 @@
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
 		>;
 	};
 
@@ -198,22 +211,22 @@
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x18a (PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
-			0x18c (PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x18e (PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
-			0x190 (PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x192 (PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
-			0x194 (PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
 		>;
 	};
 
@@ -225,85 +238,85 @@
 
 	mcspi4_pins: pinmux_mcspi4_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
-			0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
-			0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
-			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
-			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
 		>;
 	};
 
 	acx565akm_pins: pinmux_acx565akm_pins {
 		pinctrl-single,pins = <
-			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
 		>;
 	};
 
 	dss_sdi_pins: pinmux_dss_sdi_pins {
 		pinctrl-single,pins = <
-			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
-			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
-			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
-			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
 
-			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
-			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
 		>;
 	};
 
 	wl1251_pins: pinmux_wl1251 {
 		pinctrl-single,pins = <
-			0x0ce (PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
-			0x05a (PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
+			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
 		>;
 	};
 
 	ssi_pins: pinmux_ssi {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
-			0x14e (PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
-			0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
-			0x14c (PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
-			0x154 (PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
-			0x156 (PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
-			0x158 (PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
-			0x15a (PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)		/* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
 		>;
 	};
 
 	modem_pins: pinmux_modem {
 		pinctrl-single,pins = <
-			0x0ac (PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
-			0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
-			0x0b2 (PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
-			0x0b4 (PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
-			0x0b6 (PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
-			0x15e (PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)		/* gpio 72 => ape_rst_rq */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
 		>;
 	};
 };
@@ -328,6 +341,7 @@
 	regulator-name = "V28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on; /* due to battery cover sensor */
 };
 
@@ -335,30 +349,35 @@
 	regulator-name = "VCSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux3 {
 	regulator-name = "VMMC2_30";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux4 {
 	regulator-name = "VCAM_ANA_28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc1 {
 	regulator-name = "VMMC1";
 	regulator-min-microvolt = <1850000>;
 	regulator-max-microvolt = <3150000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc2 {
 	regulator-name = "V28_A";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on; /* due VIO leak to AIC34 VDDs */
 };
 
@@ -366,6 +385,7 @@
 	regulator-name = "VPLL";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on;
 };
 
@@ -373,6 +393,7 @@
 	regulator-name = "VSDI_CSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on;
 };
 
@@ -380,6 +401,7 @@
 	regulator-name = "VMMC2_IO_18";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vio {
@@ -522,6 +544,21 @@
 		amstaos,cover-comp-gain = <16>;
 	};
 
+	adp1653: led-controller@30 {
+		compatible = "adi,adp1653";
+		reg = <0x30>;
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+		flash {
+			flash-timeout-us = <500000>;
+			flash-max-microamp = <320000>;
+			led-max-microamp = <50000>;
+		};
+		indicator {
+			led-max-microamp = <17500>;
+		};
+	};
+
 	lp5523: lp5523@32 {
 		compatible = "national,lp5523";
 		reg = <0x32>;
@@ -618,7 +655,7 @@
 		ti,termination-current = <100>;
 		ti,resistor-sense = <68>;
 
-		ti,usb-charger-detection = <&isp1704>;
+		ti,usb-charger-detection = <&isp1707>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 800b379d3..927b17fc4 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -14,6 +14,13 @@
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
+			operating-points = <
+				/* kHz    uV */
+				300000  1012500
+				600000  1200000
+				800000  1325000
+				1000000	1375000
+			>;
 		};
 	};
 
@@ -27,21 +34,103 @@
 		regulator-name = "VEMMC";
 		regulator-min-microvolt = <2900000>;
 		regulator-max-microvolt = <2900000>;
-		gpio = <&gpio5 29 0>; /* gpio line 157 */
+		gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
 		startup-delay-us = <150>;
 		enable-active-high;
 	};
+
+	vwlan_fixed: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VWLAN";
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
+		enable-active-high;
+		regulator-boot-off;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "debug::sleep";
+			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;  /* gpio92 */
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&debug_leds>;
+		};
+	};
 };
 
 &omap3_pmx_core {
+	accelerator_pins: pinmux_accelerator_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4)	/* mcspi2_somi.gpio_180 -> LIS302 INT1 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4)	/* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
+		>;
+	};
+
+	debug_leds: pinmux_debug_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4)       /* dss_data22.gpio_92 */
+		>;
+	};
+
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
+			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
+		>;
+	};
+
+	ssi_pins: pinmux_ssi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)            /* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)            /* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)      /* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)	/* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)             /* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)             /* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)            /* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)            /* ssi1_wake */
+		>;
+	};
+
+	ssi_pins_idle: pinmux_ssi_pins_idle {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7)            /* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7)            /* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7)    /* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)	/* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7)             /* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7)             /* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4)            /* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7)            /* ssi1_wake */
+		>;
+	};
+
+	modem_pins1: pinmux_modem_core1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4)	/* gpio_34 (ape_rst_rq) */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4)            /* gpio_88 (cmt_rst_rq) */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4)            /* gpio_93 (cmt_apeslpx) */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	modem_pins2: pinmux_modem_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)         /* gpio_23 (cmt_en) */
 		>;
 	};
 };
@@ -72,6 +161,30 @@
 	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
 };
 
+&vdac {
+	regulator-name = "vdac";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vpll1 {
+	regulator-name = "vpll1";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vpll2 {
+	regulator-name = "vpll2";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vaux1 {
+	regulator-name = "vaux1";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
 /* CSI-2 receiver */
 &vaux2 {
 	regulator-name = "vaux2";
@@ -86,12 +199,107 @@
 	regulator-max-microvolt = <2800000>;
 };
 
+&vaux4 {
+	regulator-name = "vaux4";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&vmmc1 {
+	regulator-name = "vmmc1";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+&vmmc2 {
+	regulator-name = "vmmc2";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vintana1 {
+	regulator-name = "vintana1";
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+};
+
+&vintana2 {
+	regulator-name = "vintana2";
+	regulator-min-microvolt = <2750000>;
+	regulator-max-microvolt = <2750000>;
+};
+
+&vintdig {
+	regulator-name = "vintdig";
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+};
+
+&vsim {
+	regulator-name = "vsim";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vio {
+	regulator-name = "vio";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 };
 
 &i2c3 {
 	clock-frequency = <400000>;
+
+	lis302: lis302@1d {
+		compatible = "st,lis3lv02d";
+		reg = <0x1d>;
+
+		Vdd-supply = <&vaux1>;
+		Vdd_IO-supply = <&vio>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accelerator_pins>;
+
+                interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
+
+		/* click flags */
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+
+		/* Limits are 0.5g * value */
+		st,click-threshold-x = <8>;
+		st,click-threshold-y = <8>;
+		st,click-threshold-z = <10>;
+
+		/* Click must be longer than time limit */
+		st,click-time-limit = <9>;
+
+		/* Kind of debounce filter */
+		st,click-latency = <50>;
+
+		st,wakeup-x-hi;
+		st,wakeup-y-hi;
+		st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
+
+		st,wakeup2-z-hi;
+		st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
+
+		st,highpass-cutoff-hz = <2>;
+
+		/* Interrupt line 1 for thresholds */
+		st,irq1-ff-wu-1;
+		st,irq1-ff-wu-2;
+		/* Interrupt line 2 for click detection */
+		st,irq2-click;
+
+		st,wu-duration-1 = <8>;
+		st,wu-duration-2 = <8>;
+	};
 };
 
 &mmc1 {
@@ -191,3 +399,39 @@
 		};
 	};
 };
+
+&ssi_port1 {
+	pinctrl-names = "default", "idle";
+	pinctrl-0 = <&ssi_pins>;
+	pinctrl-1 = <&ssi_pins_idle>;
+
+	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+	modem: hsi-client {
+		pinctrl-names = "default";
+		pinctrl-0 = <&modem_pins1 &modem_pins2>;
+
+		hsi-channel-ids = <0>, <1>, <2>, <3>;
+		hsi-channel-names = "mcsaab-control",
+				    "speech-control",
+				    "speech-data",
+				    "mcsaab-data";
+		hsi-speed-kbps = <96000>;
+		hsi-mode = "frame";
+		hsi-flow = "synchronized";
+		hsi-arb-mode = "round-robin";
+
+		interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */
+
+		gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */
+			<&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */
+			<&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */
+		gpio-names = "cmt_apeslpx",
+			     "cmt_rst_rq",
+			     "cmt_en";
+	};
+};
+
+&ssi_port2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index 0885b34d5..646601a3e 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -11,10 +11,44 @@
 /dts-v1/;
 
 #include "omap3-n950-n9.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Nokia N950";
 	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
+
+	keys {
+		compatible = "gpio-keys";
+
+		keypad_slide {
+			label = "Keypad Slide";
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* 109 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			wakeup-source;
+			pinctrl-names = "default";
+			pinctrl-0 = <&keypad_slide_pins>;
+		};
+	};
+};
+
+&omap3_pmx_core {
+	keypad_slide_pins: pinmux_debug_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)       /* cam_d10.gpio_109 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	spi4_pins: pinmux_spi4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+		>;
+	};
 };
 
 &i2c2 {
@@ -53,3 +87,101 @@
 		};
 	};
 };
+
+&mcspi4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
+
+&modem {
+	compatible = "nokia,n950-modem";
+};
+
+&twl {
+	twl_audio: audio {
+		compatible = "ti,twl4030-audio";
+		ti,enable-vibra = <1>;
+	};
+};
+
+&twl_keypad {
+	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_BACKSLASH)
+			 MATRIX_KEY(0x01, 0x00, KEY_LEFTSHIFT)
+			 MATRIX_KEY(0x02, 0x00, KEY_COMPOSE)
+			 MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA)
+			 MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+			 MATRIX_KEY(0x05, 0x00, KEY_BACKSPACE)
+			 MATRIX_KEY(0x06, 0x00, KEY_VOLUMEDOWN)
+			 MATRIX_KEY(0x07, 0x00, KEY_VOLUMEUP)
+
+			 MATRIX_KEY(0x03, 0x01, KEY_Z)
+			 MATRIX_KEY(0x04, 0x01, KEY_A)
+			 MATRIX_KEY(0x05, 0x01, KEY_Q)
+			 MATRIX_KEY(0x06, 0x01, KEY_W)
+			 MATRIX_KEY(0x07, 0x01, KEY_E)
+
+			 MATRIX_KEY(0x03, 0x02, KEY_X)
+			 MATRIX_KEY(0x04, 0x02, KEY_S)
+			 MATRIX_KEY(0x05, 0x02, KEY_D)
+			 MATRIX_KEY(0x06, 0x02, KEY_C)
+			 MATRIX_KEY(0x07, 0x02, KEY_V)
+
+			 MATRIX_KEY(0x03, 0x03, KEY_O)
+			 MATRIX_KEY(0x04, 0x03, KEY_I)
+			 MATRIX_KEY(0x05, 0x03, KEY_U)
+			 MATRIX_KEY(0x06, 0x03, KEY_L)
+			 MATRIX_KEY(0x07, 0x03, KEY_APOSTROPHE)
+
+			 MATRIX_KEY(0x03, 0x04, KEY_Y)
+			 MATRIX_KEY(0x04, 0x04, KEY_K)
+			 MATRIX_KEY(0x05, 0x04, KEY_J)
+			 MATRIX_KEY(0x06, 0x04, KEY_H)
+			 MATRIX_KEY(0x07, 0x04, KEY_G)
+
+			 MATRIX_KEY(0x03, 0x05, KEY_B)
+			 MATRIX_KEY(0x04, 0x05, KEY_COMMA)
+			 MATRIX_KEY(0x05, 0x05, KEY_M)
+			 MATRIX_KEY(0x06, 0x05, KEY_N)
+			 MATRIX_KEY(0x07, 0x05, KEY_DOT)
+
+			 MATRIX_KEY(0x00, 0x06, KEY_SPACE)
+			 MATRIX_KEY(0x03, 0x06, KEY_T)
+			 MATRIX_KEY(0x04, 0x06, KEY_UP)
+			 MATRIX_KEY(0x05, 0x06, KEY_LEFT)
+			 MATRIX_KEY(0x06, 0x06, KEY_RIGHT)
+			 MATRIX_KEY(0x07, 0x06, KEY_DOWN)
+
+			 MATRIX_KEY(0x03, 0x07, KEY_P)
+			 MATRIX_KEY(0x04, 0x07, KEY_ENTER)
+			 MATRIX_KEY(0x05, 0x07, KEY_SLASH)
+			 MATRIX_KEY(0x06, 0x07, KEY_F)
+			 MATRIX_KEY(0x07, 0x07, KEY_R)
+			 >;
+};
+
+&lis302 {
+	st,axis-x = <(-2)>; /* LIS3_INV_DEV_Y */
+	st,axis-y = <(-1)>; /* LIS3_INV_DEV_X */
+	st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+	st,min-limit-x = <(-32)>;
+	st,min-limit-y = <3>;
+	st,min-limit-z = <3>;
+
+	st,max-limit-x = <(-3)>;
+	st,max-limit-y = <32>;
+	st,max-limit-z = <32>;
+};
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index 7aae8fb82..3b3a75997 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -48,7 +48,7 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 18e164968..3e946cac5 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -35,7 +35,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio6 8 0>;				/* gpio_168: vbus enable */
+		gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;		/* gpio_168: vbus enable */
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
@@ -218,3 +218,64 @@
 	pinctrl-0 = <&uart2_pins>;
 };
 
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		linux,mtd-name= "micron,mt29c4g96maz";
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0 0x80000>; /* 512KiB */
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1C0000>; /* 1792KiB */
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>; /* 256KiB */
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x800000>; /* 8192KiB */
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0xA80000 0>;
+			/* HACK: MTDPART_SIZ_FULL=0 so fill to end */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 17b82f826..4f4c6efbd 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -41,13 +41,13 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 		button1@14 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
index 802f704f6..ae5564abb 100644
--- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
@@ -69,7 +69,7 @@
 		display0 = &dvi0;
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder {
 		compatible = "ti,tfp410";
 
 		ports {
@@ -79,7 +79,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -87,14 +87,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector {
 		compatible = "dvi-connector";
 		label = "dvi";
 
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index df8908adb..854117dc0 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -62,6 +62,7 @@
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
 			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
 			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs1.mcspi1_cs1 */
 		>;
 	};
 
@@ -118,12 +119,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	lcd0: display@0 {
+	lcd0: display@1 {
 		compatible = "lgphilips,lb035q02";
 		label = "lcd35";
 
 		reg = <1>;					/* CS1 */
-		spi-max-frequency = <10000000>;
+		spi-max-frequency = <500000>;
 		spi-cpol;
 		spi-cpha;
 
@@ -151,7 +152,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
@@ -160,6 +161,6 @@
 		ti,x-plate-ohms = /bits/ 16 <180>;
 		ti,pressure-max = /bits/ 16 <255>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 048fd2169..b0753ef8a 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -96,7 +96,7 @@
 		display0 = &lcd0;
 	};
 
-	lcd0: display@0 {
+	lcd0: display {
 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
 		label = "lcd43";
 
@@ -163,7 +163,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
@@ -172,7 +172,7 @@
 		ti,x-plate-ohms = /bits/ 16 <180>;
 		ti,pressure-max = /bits/ 16 <255>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 49d2254a9..250cc7fe5 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -41,13 +41,13 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 		button1@14 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
new file mode 100644
index 000000000..8df7ec35d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			wakeup-source;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/omap3-overo-palo35.dts
new file mode 100644
index 000000000..e3e2bce6e
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo35.dts
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Palo35";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 087aedf5b..0ea2c451c 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -41,13 +41,13 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 		button1@14 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
new file mode 100644
index 000000000..4e725d2d0
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
new file mode 100644
index 000000000..da6afafcc
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 9e24b6a1d..1b304e2f1 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
new file mode 100644
index 000000000..82e98ee30
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	smsc1: ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+
+	smsc2: ethernet@4,0 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+
+		reg = <4 0 0xff>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 65 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-tobiduo.dts
new file mode 100644
index 000000000..b9ce310f6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on TobiDuo";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 69ca7c45b..932a02ff5 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -32,7 +32,3 @@
 		>;
 	};
 };
-
-&mcbsp2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
index 9619a28df..25498f756 100644
--- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts
+++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
@@ -19,7 +19,7 @@
 / {
 	model = "Pandora Handheld Console 1GHz";
 
-	compatible = "ti,omap36xx", "ti,omap3";
+	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
index fb803a70a..8775897a4 100644
--- a/arch/arm/boot/dts/omap3-pandora-600mhz.dts
+++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
@@ -19,7 +19,7 @@
 / {
 	model = "Pandora Handheld Console";
 
-	compatible = "ti,omap3";
+	compatible = "openpandora,omap3-pandora-600mhz", "ti,omap3430", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 782ab1ff1..dbc4dc721 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -27,7 +27,7 @@
 		display0 = &lcd;
 	};
 
-	tv: connector@1 {
+	tv: connector {
 		compatible = "connector-analog-tv";
 		label = "tv";
 
@@ -84,112 +84,112 @@
 			label = "up";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;	/* GPIO_110 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		down-button {
 			label = "down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;	/* GPIO_103 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left-button {
 			label = "left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;	/* GPIO_96 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right-button {
 			label = "right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;	/* GPIO_98 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		pageup-button {
 			label = "game 1";
 			linux,code = <KEY_PAGEUP>;
 			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;	/* GPIO_109 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		pagedown-button {
 			label = "game 3";
 			linux,code = <KEY_PAGEDOWN>;
 			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;	/* GPIO_106 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		home-button {
 			label = "game 4";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;	/* GPIO_101 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		end-button {
 			label = "game 2";
 			linux,code = <KEY_END>;
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* GPIO_111 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right-shift {
 			label = "l";
 			linux,code = <KEY_RIGHTSHIFT>;
 			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;	/* GPIO_102 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		kp-plus {
 			label = "l2";
 			linux,code = <KEY_KPPLUS>;
 			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;	/* GPIO_97 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right-ctrl {
 			label = "r";
 			linux,code = <KEY_RIGHTCTRL>;
 			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;	/* GPIO_105 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		kp-minus {
 			label = "r2";
 			linux,code = <KEY_KPMINUS>;
 			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;	/* GPIO_107 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left-ctrl {
 			label = "ctrl";
 			linux,code = <KEY_LEFTCTRL>;
 			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;	/* GPIO_104 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;	/* GPIO_99 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		hold {
 			label = "hold";
 			linux,code = <KEY_COFFEE>;
 			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* GPIO_176 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left-alt {
 			label = "alt";
 			linux,code = <KEY_LEFTALT>;
 			gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;	/* GPIO_100 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid {
@@ -199,6 +199,38 @@
 			gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;   /* GPIO_108 */
 		};
 	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
+		vcc-supply = <&vaux2>;
+	};
+
+	/* HS USB Host VBUS supply
+	 * disabling this regulator causes current leakage, and LCD flicker
+	 * on earlier (CC) board revisions, so keep it always on */
+	usb_host_5v: fixed-regulator-usb_host_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* GPIO_164 */
+	};
+
+	/* wg7210 (wifi+bt module) 32k clock buffer */
+	wg7210_32k: fixed-regulator-wg7210_32k {
+		compatible = "regulator-fixed";
+		regulator-name = "wg7210_32k";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &omap3_pmx_core {
@@ -459,13 +491,18 @@
 	power = <50>;
 };
 
+/*
+ * Many pandora boards have been produced with defective write-protect switches
+ * on either slot, so it was decided not to use this feature. If you know
+ * your board has good switches, feel free to uncomment wp-gpios below.
+ */
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;	/* GPIO_126 */
+	/*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/	/* GPIO_126 */
 };
 
 &mmc2 {
@@ -473,8 +510,13 @@
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&vmmc2>;
 	bus-width = <4>;
-	cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;	/* GPIO_127 */
+	cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+	/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/	/* GPIO_127 */
+};
+
+/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
+&mmc3 {
+	status = "disabled";
 };
 
 /* bluetooth*/
@@ -496,11 +538,19 @@
 	port2-mode = "ehci-phy";
 };
 
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
 &gpmc {
 	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "sw";
 
@@ -545,7 +595,7 @@
 			reg = <0x280000 0xa00000>;
 		};
 
-		filesystem@680000 {
+		filesystem@c80000 {
 			label = "rootfs";
 			reg = <0xc80000 0>;	/* 0 = MTDPART_SIZ_FULL */
 		};
@@ -561,7 +611,7 @@
 		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <30 0>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 0>;
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&vaux4>;
 
 		ti,x-min = /bits/ 16 <0>;
@@ -571,7 +621,7 @@
 		ti,x-plate-ohms = /bits/ 16 <40>;
 		ti,pressure-max = /bits/ 16 <255>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 
 	lcd: lcd@1 {
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
index f4b1a6185..157345bb8 100644
--- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -66,6 +66,6 @@
 		ti,x-plate-ohms = /bits/ 16 <40>;
 		ti,pressure-max = /bits/ 16 <255>;
 		ti,swap-xy;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index 827f61426..73643fabd 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -3,7 +3,7 @@
  */
 
 / {
-	tfp410: encoder@0 {
+	tfp410: encoder {
 		compatible = "ti,tfp410";
 
 		powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;  /* gpio_54 */
@@ -18,7 +18,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -26,14 +26,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector {
 		compatible = "dvi-connector";
 		label = "dvi";
 
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
new file mode 100644
index 000000000..78a1184cb
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sniper.dts
@@ -0,0 +1,254 @@
+/*
+ * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LG Optimus Black";
+	compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx */
+		>;
+	};
+
+	dp3t_sel_pins: pinmux_dp3t_sel_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4)	/* gpio_161 */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* gpio_162 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	lp8720_en_pin: pinmux_lp8720_en_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4)	/* gpio_37 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0)	/* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat7 */
+		>;
+	};
+
+	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+
+	mmc1_cd_pin: pinmux_mmc1_cd_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4)		/* gpio_10 */
+		>;
+	};
+};
+
+&gpio2 {
+	ti,no-reset-on-init;
+};
+
+&gpio5 {
+	ti,no-reset-on-init;
+};
+
+&gpio6 {
+	ti,no-reset-on-init;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &dp3t_sel_pins>;
+
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		power {
+			compatible = "ti,twl4030-power";
+			ti,use_poweroff;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	lp8720@7d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lp8720_en_pin>;
+
+		compatible = "ti,lp8720";
+		reg = <0x7d>;
+
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */
+
+		lp8720_ldo1: ldo1 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>;
+
+	vmmc-supply = <&lp8720_ldo1>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */
+	bus-width = <4>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_otg_hs_pins>;
+
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x00, KEY_VOLUMEUP)
+		MATRIX_KEY(0x01, 0x00, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x02, 0x00, KEY_SELECT)
+	>;
+};
+
+/*
+ * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3.
+ * When not powered, these sensors cause the I2C3 clock to stay low at all times,
+ * making it impossible to reach other devices on I2C3.
+ */
+
+&vaux2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+};
+
+&vdac {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 7bd8d9a4f..644d3c8ea 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -37,7 +37,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
@@ -225,7 +225,7 @@
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
-	cd-gpios = <&twl_gpio 0 0>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 };
 
@@ -275,10 +275,14 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x01000000>;
+	ranges = <0 0 0x30000000 0x01000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;	/* GPMC_DEVWIDTH_16BIT */
 		ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts
index d659515ab..9736ba79b 100644
--- a/arch/arm/boot/dts/omap3-thunder.dts
+++ b/arch/arm/boot/dts/omap3-thunder.dts
@@ -85,7 +85,7 @@
 		display0 = &lcd0;
 	};
 
-	lcd0: display@0 {
+	lcd0: display {
 		compatible = "samsung,lte430wq-f0c", "panel-dpi";
 		label = "lcd";
 
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 131448d86..c29b41dc7 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -44,7 +44,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio4 5 0>;	/* gpio101 */
+		gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
@@ -54,27 +54,27 @@
 	/* REVISIT: twl gpio0 is mmc0_cd */
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
-			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
-			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
-			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
 		>;
 	};
 
@@ -87,35 +87,35 @@
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+                        OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
-                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+                        OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+                        OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+                        OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+                        OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+                        OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+                        OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+                        OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+                        OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	/* wl12xx GPIO output for WLAN_EN */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
 		>;
 	};
 };
@@ -125,7 +125,7 @@
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
 			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
-			OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
 			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
 			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
 		>;
@@ -135,7 +135,7 @@
 &omap3_pmx_wkup {
 	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
 		pinctrl-single,pins = <
-			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 69a40cfc1..4c3c471d2 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -43,7 +43,7 @@
 		};
 	};
 
-	pmu {
+	pmu@54000000 {
 		compatible = "arm,cortex-a8-pmu";
 		reg = <0x54000000 0x800000>;
 		interrupts = <3>;
@@ -113,10 +113,22 @@
 				};
 
 				scm_conf: scm_conf@270 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x270 0x330>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0x270 0x330>;
+
+					pbias_regulator: pbias_regulator@2b0 {
+						compatible = "ti,pbias-omap3", "ti,pbias-omap";
+						reg = <0x2b0 0x4>;
+						syscon = <&scm_conf>;
+						pbias_mmc_reg: pbias_mmc_omap2430 {
+							regulator-name = "pbias_mmc_omap2430";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3000000>;
+						};
+					};
 
 					scm_clocks: clocks {
 						#address-cells = <1>;
@@ -202,17 +214,6 @@
 			dma-requests = <96>;
 		};
 
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0x2b0 0x4>;
-			syscon = <&scm_conf>;
-			pbias_mmc_reg: pbias_mmc_omap2430 {
-				regulator-name = "pbias_mmc_omap2430";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
 		gpio1: gpio@48310000 {
 			compatible = "ti,omap3-gpio";
 			reg = <0x48310000 0x200>;
@@ -492,6 +493,8 @@
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp1_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -510,6 +513,8 @@
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -528,6 +533,8 @@
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
+			clock-names = "fck", "ick";
 			status = "disabled";
 		};
 
@@ -544,6 +551,8 @@
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp4_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -560,6 +569,8 @@
 			dmas = <&sdma 21>,
 			       <&sdma 22>;
 			dma-names = "tx", "rx";
+			clocks = <&mcbsp5_fck>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 
@@ -716,10 +727,16 @@
 			ti,hwmods = "gpmc";
 			reg = <0x6e000000 0x02d0>;
 			interrupts = <20>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		usb_otg_hs: usb_otg_hs@480ab000 {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 16b0cdfbe..a0dc8d854 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -103,10 +103,14 @@
 	};
 
 	nand@1,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		linux,mtd-name= "micron,mt29f1g08abb";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <1 0 4>;	/* CS1, offset 0, IO size 4 */
 		ti,nand-ecc-opt = "sw";
 		nand-bus-width = <8>;
 		gpmc,cs-on-ns = <0>;
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
index 4c22f3a7f..86de819a0 100644
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 &cm_clocks {
-	gfx_l3_ck: gfx_l3_ck {
+	gfx_l3_ck: gfx_l3_ck@b10 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&l3_ick>;
@@ -16,7 +16,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	gfx_l3_fck: gfx_l3_fck {
+	gfx_l3_fck: gfx_l3_fck@b40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&l3_ick>;
@@ -33,7 +33,7 @@
 		clock-div = <1>;
 	};
 
-	gfx_cg1_ck: gfx_cg1_ck {
+	gfx_cg1_ck: gfx_cg1_ck@b00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&gfx_l3_fck>;
@@ -41,7 +41,7 @@
 		ti,bit-shift = <1>;
 	};
 
-	gfx_cg2_ck: gfx_cg2_ck {
+	gfx_cg2_ck: gfx_cg2_ck@b00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&gfx_l3_fck>;
@@ -49,7 +49,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	d2d_26m_fck: d2d_26m_fck {
+	d2d_26m_fck: d2d_26m_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&sys_ck>;
@@ -57,7 +57,7 @@
 		ti,bit-shift = <3>;
 	};
 
-	fshostusb_fck: fshostusb_fck {
+	fshostusb_fck: fshostusb_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_48m_fck>;
@@ -65,7 +65,7 @@
 		ti,bit-shift = <5>;
 	};
 
-	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1 {
+	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&corex2_fck>;
@@ -73,7 +73,7 @@
 		reg = <0x0a00>;
 	};
 
-	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1 {
+	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&corex2_fck>;
@@ -96,7 +96,7 @@
 		clock-div = <2>;
 	};
 
-	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1 {
+	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-no-wait-interface-clock";
 		clocks = <&core_l3_ick>;
@@ -104,7 +104,7 @@
 		ti,bit-shift = <4>;
 	};
 
-	fac_ick: fac_ick {
+	fac_ick: fac_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -120,7 +120,7 @@
 		clock-div = <1>;
 	};
 
-	ssi_ick: ssi_ick_3430es1 {
+	ssi_ick: ssi_ick_3430es1@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-no-wait-interface-clock";
 		clocks = <&ssi_l4_ick>;
@@ -128,7 +128,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	usb_l4_gate_ick: usb_l4_gate_ick {
+	usb_l4_gate_ick: usb_l4_gate_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-interface-clock";
 		clocks = <&l4_ick>;
@@ -136,7 +136,7 @@
 		reg = <0x0a10>;
 	};
 
-	usb_l4_div_ick: usb_l4_div_ick {
+	usb_l4_div_ick: usb_l4_div_ick@a40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&l4_ick>;
@@ -152,7 +152,7 @@
 		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
 	};
 
-	dss1_alwon_fck: dss1_alwon_fck_3430es1 {
+	dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll4_m4x2_ck>;
@@ -161,7 +161,7 @@
 		ti,set-rate-parent;
 	};
 
-	dss_ick: dss_ick_3430es1 {
+	dss_ick: dss_ick_3430es1@e10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-no-wait-interface-clock";
 		clocks = <&l4_ick>;
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
index b02017b76..858aa0796 100644
--- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
@@ -16,7 +16,7 @@
 		clock-div = <1>;
 	};
 
-	aes1_ick: aes1_ick {
+	aes1_ick: aes1_ick@a14 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&security_l4_ick2>;
@@ -24,7 +24,7 @@
 		reg = <0x0a14>;
 	};
 
-	rng_ick: rng_ick {
+	rng_ick: rng_ick@a14 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&security_l4_ick2>;
@@ -32,7 +32,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	sha11_ick: sha11_ick {
+	sha11_ick: sha11_ick@a14 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&security_l4_ick2>;
@@ -40,7 +40,7 @@
 		ti,bit-shift = <1>;
 	};
 
-	des1_ick: des1_ick {
+	des1_ick: des1_ick@a14 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&security_l4_ick2>;
@@ -48,7 +48,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	cam_mclk: cam_mclk {
+	cam_mclk: cam_mclk@f00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll4_m5x2_ck>;
@@ -57,7 +57,7 @@
 		ti,set-rate-parent;
 	};
 
-	cam_ick: cam_ick {
+	cam_ick: cam_ick@f10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-no-wait-interface-clock";
 		clocks = <&l4_ick>;
@@ -65,7 +65,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	csi2_96m_fck: csi2_96m_fck {
+	csi2_96m_fck: csi2_96m_fck@f00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&core_96m_fck>;
@@ -81,7 +81,7 @@
 		clock-div = <1>;
 	};
 
-	pka_ick: pka_ick {
+	pka_ick: pka_ick@a14 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&security_l3_ick>;
@@ -89,7 +89,7 @@
 		ti,bit-shift = <4>;
 	};
 
-	icr_ick: icr_ick {
+	icr_ick: icr_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -97,7 +97,7 @@
 		ti,bit-shift = <29>;
 	};
 
-	des2_ick: des2_ick {
+	des2_ick: des2_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -105,7 +105,7 @@
 		ti,bit-shift = <26>;
 	};
 
-	mspro_ick: mspro_ick {
+	mspro_ick: mspro_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -113,7 +113,7 @@
 		ti,bit-shift = <23>;
 	};
 
-	mailboxes_ick: mailboxes_ick {
+	mailboxes_ick: mailboxes_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -129,7 +129,7 @@
 		clock-div = <1>;
 	};
 
-	sr1_fck: sr1_fck {
+	sr1_fck: sr1_fck@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&sys_ck>;
@@ -137,7 +137,7 @@
 		ti,bit-shift = <6>;
 	};
 
-	sr2_fck: sr2_fck {
+	sr2_fck: sr2_fck@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&sys_ck>;
@@ -153,7 +153,7 @@
 		clock-div = <1>;
 	};
 
-	dpll2_fck: dpll2_fck {
+	dpll2_fck: dpll2_fck@40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&core_ck>;
@@ -163,7 +163,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll2_ck: dpll2_ck {
+	dpll2_ck: dpll2_ck@4 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dpll-clock";
 		clocks = <&sys_ck>, <&dpll2_fck>;
@@ -173,7 +173,7 @@
 		ti,low-power-bypass;
 	};
 
-	dpll2_m2_ck: dpll2_m2_ck {
+	dpll2_m2_ck: dpll2_m2_ck@44 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll2_ck>;
@@ -182,7 +182,7 @@
 		ti,index-starts-at-one;
 	};
 
-	iva2_ck: iva2_ck {
+	iva2_ck: iva2_ck@0 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&dpll2_m2_ck>;
@@ -190,7 +190,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	modem_fck: modem_fck {
+	modem_fck: modem_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&sys_ck>;
@@ -198,7 +198,7 @@
 		ti,bit-shift = <31>;
 	};
 
-	sad2d_ick: sad2d_ick {
+	sad2d_ick: sad2d_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l3_ick>;
@@ -206,7 +206,7 @@
 		ti,bit-shift = <3>;
 	};
 
-	mad2d_ick: mad2d_ick {
+	mad2d_ick: mad2d_ick@a18 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&l3_ick>;
@@ -214,7 +214,7 @@
 		ti,bit-shift = <3>;
 	};
 
-	mspro_fck: mspro_fck {
+	mspro_fck: mspro_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_96m_fck>;
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 4f6b2d5b1..e44656258 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -46,7 +46,7 @@
 			       0x480bd800 0x017c>;
 			interrupts = <24>;
 			iommus = <&mmu_isp>;
-			syscon = <&scm_conf 0xdc>;
+			syscon = <&scm_conf 0x6c>;
 			ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
 			#clock-cells = <1>;
 			ports {
@@ -54,6 +54,12 @@
 				#size-cells = <0>;
 			};
 		};
+
+		bandgap@48002524 {
+			reg = <0x48002524 0x4>;
+			compatible = "ti,omap34xx-bandgap";
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
index 080fb3f4e..15d186690 100644
--- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -25,7 +25,7 @@
 	};
 };
 &cm_clocks {
-	dpll5_ck: dpll5_ck {
+	dpll5_ck: dpll5_ck@d04 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dpll-clock";
 		clocks = <&sys_ck>, <&sys_ck>;
@@ -34,7 +34,7 @@
 		ti,lock;
 	};
 
-	dpll5_m2_ck: dpll5_m2_ck {
+	dpll5_m2_ck: dpll5_m2_ck@d50 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll5_ck>;
@@ -43,7 +43,7 @@
 		ti,index-starts-at-one;
 	};
 
-	sgx_gate_fck: sgx_gate_fck {
+	sgx_gate_fck: sgx_gate_fck@b00 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&core_ck>;
@@ -91,7 +91,7 @@
 		clock-div = <2>;
 	};
 
-	sgx_mux_fck: sgx_mux_fck {
+	sgx_mux_fck: sgx_mux_fck@b40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
@@ -104,7 +104,7 @@
 		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
 	};
 
-	sgx_ick: sgx_ick {
+	sgx_ick: sgx_ick@b10 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&l3_ick>;
@@ -112,7 +112,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	cpefuse_fck: cpefuse_fck {
+	cpefuse_fck: cpefuse_fck@a08 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_ck>;
@@ -120,7 +120,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	ts_fck: ts_fck {
+	ts_fck: ts_fck@a08 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&omap_32k_fck>;
@@ -128,7 +128,7 @@
 		ti,bit-shift = <1>;
 	};
 
-	usbtll_fck: usbtll_fck {
+	usbtll_fck: usbtll_fck@a08 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&dpll5_m2_ck>;
@@ -136,7 +136,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	usbtll_ick: usbtll_ick {
+	usbtll_ick: usbtll_ick@a18 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -144,7 +144,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	mmchs3_ick: mmchs3_ick {
+	mmchs3_ick: mmchs3_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -152,7 +152,7 @@
 		ti,bit-shift = <30>;
 	};
 
-	mmchs3_fck: mmchs3_fck {
+	mmchs3_fck: mmchs3_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_96m_fck>;
@@ -160,7 +160,7 @@
 		ti,bit-shift = <30>;
 	};
 
-	dss1_alwon_fck: dss1_alwon_fck_3430es2 {
+	dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 {
 		#clock-cells = <0>;
 		compatible = "ti,dss-gate-clock";
 		clocks = <&dpll4_m4x2_ck>;
@@ -169,7 +169,7 @@
 		ti,set-rate-parent;
 	};
 
-	dss_ick: dss_ick_3430es2 {
+	dss_ick: dss_ick_3430es2@e10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dss-interface-clock";
 		clocks = <&l4_ick>;
@@ -177,7 +177,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	usbhost_120m_fck: usbhost_120m_fck {
+	usbhost_120m_fck: usbhost_120m_fck@1400 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll5_m2_ck>;
@@ -185,7 +185,7 @@
 		ti,bit-shift = <1>;
 	};
 
-	usbhost_48m_fck: usbhost_48m_fck {
+	usbhost_48m_fck: usbhost_48m_fck@1400 {
 		#clock-cells = <0>;
 		compatible = "ti,dss-gate-clock";
 		clocks = <&omap_48m_fck>;
@@ -193,7 +193,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	usbhost_ick: usbhost_ick {
+	usbhost_ick: usbhost_ick@1410 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dss-interface-clock";
 		clocks = <&l4_ick>;
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
index 200ae3a5c..a21d1f021 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -8,14 +8,14 @@
  * published by the Free Software Foundation.
  */
 &cm_clocks {
-	dpll4_ck: dpll4_ck {
+	dpll4_ck: dpll4_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dpll-per-j-type-clock";
 		clocks = <&sys_ck>, <&sys_ck>;
 		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
 	};
 
-	dpll4_m5x2_ck: dpll4_m5x2_ck {
+	dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,hsdiv-gate-clock";
 		clocks = <&dpll4_m5x2_mul_ck>;
@@ -25,7 +25,7 @@
 		ti,set-bit-to-disable;
 	};
 
-	dpll4_m2x2_ck: dpll4_m2x2_ck {
+	dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,hsdiv-gate-clock";
 		clocks = <&dpll4_m2x2_mul_ck>;
@@ -34,7 +34,7 @@
 		ti,set-bit-to-disable;
 	};
 
-	dpll3_m3x2_ck: dpll3_m3x2_ck {
+	dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,hsdiv-gate-clock";
 		clocks = <&dpll3_m3x2_mul_ck>;
@@ -43,7 +43,7 @@
 		ti,set-bit-to-disable;
 	};
 
-	dpll4_m3x2_ck: dpll4_m3x2_ck {
+	dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,hsdiv-gate-clock";
 		clocks = <&dpll4_m3x2_mul_ck>;
@@ -52,7 +52,7 @@
 		ti,set-bit-to-disable;
 	};
 
-	dpll4_m6x2_ck: dpll4_m6x2_ck {
+	dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,hsdiv-gate-clock";
 		clocks = <&dpll4_m6x2_mul_ck>;
@@ -61,7 +61,7 @@
 		ti,set-bit-to-disable;
 	};
 
-	uart4_fck: uart4_fck {
+	uart4_fck: uart4_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&per_48m_fck>;
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
index 877318c28..1a4fbdf0d 100644
--- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 &cm_clocks {
-	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2 {
+	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&corex2_fck>;
@@ -16,7 +16,7 @@
 		reg = <0x0a00>;
 	};
 
-	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&corex2_fck>;
@@ -39,7 +39,7 @@
 		clock-div = <2>;
 	};
 
-	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2 {
+	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-hsotgusb-interface-clock";
 		clocks = <&core_l3_ick>;
@@ -55,7 +55,7 @@
 		clock-div = <1>;
 	};
 
-	ssi_ick: ssi_ick_3430es2 {
+	ssi_ick: ssi_ick_3430es2@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-ssi-interface-clock";
 		clocks = <&ssi_l4_ick>;
@@ -63,7 +63,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	usim_gate_fck: usim_gate_fck {
+	usim_gate_fck: usim_gate_fck@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&omap_96m_fck>;
@@ -143,7 +143,7 @@
 		clock-div = <20>;
 	};
 
-	usim_mux_fck: usim_mux_fck {
+	usim_mux_fck: usim_mux_fck@c40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
@@ -158,7 +158,7 @@
 		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
 	};
 
-	usim_ick: usim_ick {
+	usim_ick: usim_ick@c10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&wkup_l4_ick>;
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 86253de5a..8b7979153 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -44,7 +44,7 @@
 		abb_mpu_iva: regulator-abb-mpu {
 			compatible = "ti,abb-v1";
 			regulator-name = "abb_mpu_iva";
-			#address-cell = <0>;
+			#address-cells = <0>;
 			#size-cells = <0>;
 			reg = <0x483072f0 0x8>, <0x48306818 0x4>;
 			reg-names = "base-address", "int-address";
@@ -86,6 +86,12 @@
 				#size-cells = <0>;
 			};
 		};
+
+		bandgap@48002524 {
+			reg = <0x48002524 0x4>;
+			compatible = "ti,omap36xx-bandgap";
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index bbba5bdc4..9bd91641a 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -14,14 +14,14 @@
 		clock-frequency = <16800000>;
 	};
 
-	osc_sys_ck: osc_sys_ck {
+	osc_sys_ck: osc_sys_ck@d40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
 		reg = <0x0d40>;
 	};
 
-	sys_ck: sys_ck {
+	sys_ck: sys_ck@1270 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&osc_sys_ck>;
@@ -31,7 +31,7 @@
 		ti,index-starts-at-one;
 	};
 
-	sys_clkout1: sys_clkout1 {
+	sys_clkout1: sys_clkout1@d70 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&osc_sys_ck>;
@@ -81,7 +81,7 @@
 };
 
 &scm_clocks {
-	mcbsp5_mux_fck: mcbsp5_mux_fck {
+	mcbsp5_mux_fck: mcbsp5_mux_fck@68 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
@@ -95,7 +95,7 @@
 		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
 	};
 
-	mcbsp1_mux_fck: mcbsp1_mux_fck {
+	mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
@@ -109,7 +109,7 @@
 		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
 	};
 
-	mcbsp2_mux_fck: mcbsp2_mux_fck {
+	mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
@@ -123,7 +123,7 @@
 		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
 	};
 
-	mcbsp3_mux_fck: mcbsp3_mux_fck {
+	mcbsp3_mux_fck: mcbsp3_mux_fck@68 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
@@ -136,7 +136,7 @@
 		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
 	};
 
-	mcbsp4_mux_fck: mcbsp4_mux_fck {
+	mcbsp4_mux_fck: mcbsp4_mux_fck@68 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
@@ -193,14 +193,14 @@
 		clock-frequency = <38400000>;
 	};
 
-	dpll4_ck: dpll4_ck {
+	dpll4_ck: dpll4_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dpll-per-clock";
 		clocks = <&sys_ck>, <&sys_ck>;
 		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
 	};
 
-	dpll4_m2_ck: dpll4_m2_ck {
+	dpll4_m2_ck: dpll4_m2_ck@d48 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll4_ck>;
@@ -217,7 +217,7 @@
 		clock-div = <1>;
 	};
 
-	dpll4_m2x2_ck: dpll4_m2x2_ck {
+	dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll4_m2x2_mul_ck>;
@@ -234,14 +234,14 @@
 		clock-div = <1>;
 	};
 
-	dpll3_ck: dpll3_ck {
+	dpll3_ck: dpll3_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dpll-core-clock";
 		clocks = <&sys_ck>, <&sys_ck>;
 		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
 	};
 
-	dpll3_m3_ck: dpll3_m3_ck {
+	dpll3_m3_ck: dpll3_m3_ck@1140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll3_ck>;
@@ -259,7 +259,7 @@
 		clock-div = <1>;
 	};
 
-	dpll3_m3x2_ck: dpll3_m3x2_ck {
+	dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll3_m3x2_mul_ck>;
@@ -288,7 +288,7 @@
 		clock-frequency = <0x0>;
 	};
 
-	dpll3_m2_ck: dpll3_m2_ck {
+	dpll3_m2_ck: dpll3_m2_ck@d40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll3_ck>;
@@ -306,7 +306,7 @@
 		clock-div = <1>;
 	};
 
-	dpll1_fck: dpll1_fck {
+	dpll1_fck: dpll1_fck@940 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&core_ck>;
@@ -316,7 +316,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll1_ck: dpll1_ck {
+	dpll1_ck: dpll1_ck@904 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-dpll-clock";
 		clocks = <&sys_ck>, <&dpll1_fck>;
@@ -331,7 +331,7 @@
 		clock-div = <1>;
 	};
 
-	dpll1_x2m2_ck: dpll1_x2m2_ck {
+	dpll1_x2m2_ck: dpll1_x2m2_ck@944 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll1_x2_ck>;
@@ -348,7 +348,7 @@
 		clock-div = <1>;
 	};
 
-	omap_96m_fck: omap_96m_fck {
+	omap_96m_fck: omap_96m_fck@d40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&cm_96m_fck>, <&sys_ck>;
@@ -356,7 +356,7 @@
 		reg = <0x0d40>;
 	};
 
-	dpll4_m3_ck: dpll4_m3_ck {
+	dpll4_m3_ck: dpll4_m3_ck@e40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll4_ck>;
@@ -374,7 +374,7 @@
 		clock-div = <1>;
 	};
 
-	dpll4_m3x2_ck: dpll4_m3x2_ck {
+	dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll4_m3x2_mul_ck>;
@@ -383,7 +383,7 @@
 		ti,set-bit-to-disable;
 	};
 
-	omap_54m_fck: omap_54m_fck {
+	omap_54m_fck: omap_54m_fck@d40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
@@ -399,7 +399,7 @@
 		clock-div = <2>;
 	};
 
-	omap_48m_fck: omap_48m_fck {
+	omap_48m_fck: omap_48m_fck@d40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
@@ -415,7 +415,7 @@
 		clock-div = <4>;
 	};
 
-	dpll4_m4_ck: dpll4_m4_ck {
+	dpll4_m4_ck: dpll4_m4_ck@e40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll4_ck>;
@@ -433,7 +433,7 @@
 		ti,set-rate-parent;
 	};
 
-	dpll4_m4x2_ck: dpll4_m4x2_ck {
+	dpll4_m4x2_ck: dpll4_m4x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll4_m4x2_mul_ck>;
@@ -443,7 +443,7 @@
 		ti,set-rate-parent;
 	};
 
-	dpll4_m5_ck: dpll4_m5_ck {
+	dpll4_m5_ck: dpll4_m5_ck@f40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll4_ck>;
@@ -461,7 +461,7 @@
 		ti,set-rate-parent;
 	};
 
-	dpll4_m5x2_ck: dpll4_m5x2_ck {
+	dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll4_m5x2_mul_ck>;
@@ -471,7 +471,7 @@
 		ti,set-rate-parent;
 	};
 
-	dpll4_m6_ck: dpll4_m6_ck {
+	dpll4_m6_ck: dpll4_m6_ck@1140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll4_ck>;
@@ -489,7 +489,7 @@
 		clock-div = <1>;
 	};
 
-	dpll4_m6x2_ck: dpll4_m6x2_ck {
+	dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll4_m6x2_mul_ck>;
@@ -506,7 +506,7 @@
 		clock-div = <1>;
 	};
 
-	clkout2_src_gate_ck: clkout2_src_gate_ck {
+	clkout2_src_gate_ck: clkout2_src_gate_ck@d70 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&core_ck>;
@@ -514,7 +514,7 @@
 		reg = <0x0d70>;
 	};
 
-	clkout2_src_mux_ck: clkout2_src_mux_ck {
+	clkout2_src_mux_ck: clkout2_src_mux_ck@d70 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
@@ -527,7 +527,7 @@
 		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
 	};
 
-	sys_clkout2: sys_clkout2 {
+	sys_clkout2: sys_clkout2@d70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&clkout2_src_ck>;
@@ -545,7 +545,7 @@
 		clock-div = <1>;
 	};
 
-	arm_fck: arm_fck {
+	arm_fck: arm_fck@924 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&mpu_ck>;
@@ -561,7 +561,7 @@
 		clock-div = <1>;
 	};
 
-	l3_ick: l3_ick {
+	l3_ick: l3_ick@a40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&core_ck>;
@@ -570,7 +570,7 @@
 		ti,index-starts-at-one;
 	};
 
-	l4_ick: l4_ick {
+	l4_ick: l4_ick@a40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&l3_ick>;
@@ -580,7 +580,7 @@
 		ti,index-starts-at-one;
 	};
 
-	rm_ick: rm_ick {
+	rm_ick: rm_ick@c40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&l4_ick>;
@@ -590,7 +590,7 @@
 		ti,index-starts-at-one;
 	};
 
-	gpt10_gate_fck: gpt10_gate_fck {
+	gpt10_gate_fck: gpt10_gate_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -598,7 +598,7 @@
 		reg = <0x0a00>;
 	};
 
-	gpt10_mux_fck: gpt10_mux_fck {
+	gpt10_mux_fck: gpt10_mux_fck@a40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -612,7 +612,7 @@
 		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
 	};
 
-	gpt11_gate_fck: gpt11_gate_fck {
+	gpt11_gate_fck: gpt11_gate_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -620,7 +620,7 @@
 		reg = <0x0a00>;
 	};
 
-	gpt11_mux_fck: gpt11_mux_fck {
+	gpt11_mux_fck: gpt11_mux_fck@a40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -642,7 +642,7 @@
 		clock-div = <1>;
 	};
 
-	mmchs2_fck: mmchs2_fck {
+	mmchs2_fck: mmchs2_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_96m_fck>;
@@ -650,7 +650,7 @@
 		ti,bit-shift = <25>;
 	};
 
-	mmchs1_fck: mmchs1_fck {
+	mmchs1_fck: mmchs1_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_96m_fck>;
@@ -658,7 +658,7 @@
 		ti,bit-shift = <24>;
 	};
 
-	i2c3_fck: i2c3_fck {
+	i2c3_fck: i2c3_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_96m_fck>;
@@ -666,7 +666,7 @@
 		ti,bit-shift = <17>;
 	};
 
-	i2c2_fck: i2c2_fck {
+	i2c2_fck: i2c2_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_96m_fck>;
@@ -674,7 +674,7 @@
 		ti,bit-shift = <16>;
 	};
 
-	i2c1_fck: i2c1_fck {
+	i2c1_fck: i2c1_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_96m_fck>;
@@ -682,7 +682,7 @@
 		ti,bit-shift = <15>;
 	};
 
-	mcbsp5_gate_fck: mcbsp5_gate_fck {
+	mcbsp5_gate_fck: mcbsp5_gate_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -690,7 +690,7 @@
 		reg = <0x0a00>;
 	};
 
-	mcbsp1_gate_fck: mcbsp1_gate_fck {
+	mcbsp1_gate_fck: mcbsp1_gate_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -706,7 +706,7 @@
 		clock-div = <1>;
 	};
 
-	mcspi4_fck: mcspi4_fck {
+	mcspi4_fck: mcspi4_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_48m_fck>;
@@ -714,7 +714,7 @@
 		ti,bit-shift = <21>;
 	};
 
-	mcspi3_fck: mcspi3_fck {
+	mcspi3_fck: mcspi3_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_48m_fck>;
@@ -722,7 +722,7 @@
 		ti,bit-shift = <20>;
 	};
 
-	mcspi2_fck: mcspi2_fck {
+	mcspi2_fck: mcspi2_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_48m_fck>;
@@ -730,7 +730,7 @@
 		ti,bit-shift = <19>;
 	};
 
-	mcspi1_fck: mcspi1_fck {
+	mcspi1_fck: mcspi1_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_48m_fck>;
@@ -738,7 +738,7 @@
 		ti,bit-shift = <18>;
 	};
 
-	uart2_fck: uart2_fck {
+	uart2_fck: uart2_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_48m_fck>;
@@ -746,7 +746,7 @@
 		ti,bit-shift = <14>;
 	};
 
-	uart1_fck: uart1_fck {
+	uart1_fck: uart1_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_48m_fck>;
@@ -762,7 +762,7 @@
 		clock-div = <1>;
 	};
 
-	hdq_fck: hdq_fck {
+	hdq_fck: hdq_fck@a00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_12m_fck>;
@@ -778,7 +778,7 @@
 		clock-div = <1>;
 	};
 
-	sdrc_ick: sdrc_ick {
+	sdrc_ick: sdrc_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&core_l3_ick>;
@@ -802,7 +802,7 @@
 		clock-div = <1>;
 	};
 
-	mmchs2_ick: mmchs2_ick {
+	mmchs2_ick: mmchs2_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -810,7 +810,7 @@
 		ti,bit-shift = <25>;
 	};
 
-	mmchs1_ick: mmchs1_ick {
+	mmchs1_ick: mmchs1_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -818,7 +818,7 @@
 		ti,bit-shift = <24>;
 	};
 
-	hdq_ick: hdq_ick {
+	hdq_ick: hdq_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -826,7 +826,7 @@
 		ti,bit-shift = <22>;
 	};
 
-	mcspi4_ick: mcspi4_ick {
+	mcspi4_ick: mcspi4_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -834,7 +834,7 @@
 		ti,bit-shift = <21>;
 	};
 
-	mcspi3_ick: mcspi3_ick {
+	mcspi3_ick: mcspi3_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -842,7 +842,7 @@
 		ti,bit-shift = <20>;
 	};
 
-	mcspi2_ick: mcspi2_ick {
+	mcspi2_ick: mcspi2_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -850,7 +850,7 @@
 		ti,bit-shift = <19>;
 	};
 
-	mcspi1_ick: mcspi1_ick {
+	mcspi1_ick: mcspi1_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -858,7 +858,7 @@
 		ti,bit-shift = <18>;
 	};
 
-	i2c3_ick: i2c3_ick {
+	i2c3_ick: i2c3_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -866,7 +866,7 @@
 		ti,bit-shift = <17>;
 	};
 
-	i2c2_ick: i2c2_ick {
+	i2c2_ick: i2c2_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -874,7 +874,7 @@
 		ti,bit-shift = <16>;
 	};
 
-	i2c1_ick: i2c1_ick {
+	i2c1_ick: i2c1_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -882,7 +882,7 @@
 		ti,bit-shift = <15>;
 	};
 
-	uart2_ick: uart2_ick {
+	uart2_ick: uart2_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -890,7 +890,7 @@
 		ti,bit-shift = <14>;
 	};
 
-	uart1_ick: uart1_ick {
+	uart1_ick: uart1_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -898,7 +898,7 @@
 		ti,bit-shift = <13>;
 	};
 
-	gpt11_ick: gpt11_ick {
+	gpt11_ick: gpt11_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -906,7 +906,7 @@
 		ti,bit-shift = <12>;
 	};
 
-	gpt10_ick: gpt10_ick {
+	gpt10_ick: gpt10_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -914,7 +914,7 @@
 		ti,bit-shift = <11>;
 	};
 
-	mcbsp5_ick: mcbsp5_ick {
+	mcbsp5_ick: mcbsp5_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -922,7 +922,7 @@
 		ti,bit-shift = <10>;
 	};
 
-	mcbsp1_ick: mcbsp1_ick {
+	mcbsp1_ick: mcbsp1_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -930,7 +930,7 @@
 		ti,bit-shift = <9>;
 	};
 
-	omapctrl_ick: omapctrl_ick {
+	omapctrl_ick: omapctrl_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -938,7 +938,7 @@
 		ti,bit-shift = <6>;
 	};
 
-	dss_tv_fck: dss_tv_fck {
+	dss_tv_fck: dss_tv_fck@e00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&omap_54m_fck>;
@@ -946,7 +946,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	dss_96m_fck: dss_96m_fck {
+	dss_96m_fck: dss_96m_fck@e00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&omap_96m_fck>;
@@ -954,7 +954,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	dss2_alwon_fck: dss2_alwon_fck {
+	dss2_alwon_fck: dss2_alwon_fck@e00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_ck>;
@@ -968,7 +968,7 @@
 		clock-frequency = <0>;
 	};
 
-	gpt1_gate_fck: gpt1_gate_fck {
+	gpt1_gate_fck: gpt1_gate_fck@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -976,7 +976,7 @@
 		reg = <0x0c00>;
 	};
 
-	gpt1_mux_fck: gpt1_mux_fck {
+	gpt1_mux_fck: gpt1_mux_fck@c40 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -989,7 +989,7 @@
 		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
 	};
 
-	aes2_ick: aes2_ick {
+	aes2_ick: aes2_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -1005,7 +1005,7 @@
 		clock-div = <1>;
 	};
 
-	gpio1_dbck: gpio1_dbck {
+	gpio1_dbck: gpio1_dbck@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&wkup_32k_fck>;
@@ -1013,7 +1013,7 @@
 		ti,bit-shift = <3>;
 	};
 
-	sha12_ick: sha12_ick {
+	sha12_ick: sha12_ick@a10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&core_l4_ick>;
@@ -1021,7 +1021,7 @@
 		ti,bit-shift = <27>;
 	};
 
-	wdt2_fck: wdt2_fck {
+	wdt2_fck: wdt2_fck@c00 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&wkup_32k_fck>;
@@ -1029,7 +1029,7 @@
 		ti,bit-shift = <5>;
 	};
 
-	wdt2_ick: wdt2_ick {
+	wdt2_ick: wdt2_ick@c10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&wkup_l4_ick>;
@@ -1037,7 +1037,7 @@
 		ti,bit-shift = <5>;
 	};
 
-	wdt1_ick: wdt1_ick {
+	wdt1_ick: wdt1_ick@c10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&wkup_l4_ick>;
@@ -1045,7 +1045,7 @@
 		ti,bit-shift = <4>;
 	};
 
-	gpio1_ick: gpio1_ick {
+	gpio1_ick: gpio1_ick@c10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&wkup_l4_ick>;
@@ -1053,7 +1053,7 @@
 		ti,bit-shift = <3>;
 	};
 
-	omap_32ksync_ick: omap_32ksync_ick {
+	omap_32ksync_ick: omap_32ksync_ick@c10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&wkup_l4_ick>;
@@ -1061,7 +1061,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	gpt12_ick: gpt12_ick {
+	gpt12_ick: gpt12_ick@c10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&wkup_l4_ick>;
@@ -1069,7 +1069,7 @@
 		ti,bit-shift = <1>;
 	};
 
-	gpt1_ick: gpt1_ick {
+	gpt1_ick: gpt1_ick@c10 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&wkup_l4_ick>;
@@ -1093,7 +1093,7 @@
 		clock-div = <1>;
 	};
 
-	uart3_fck: uart3_fck {
+	uart3_fck: uart3_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&per_48m_fck>;
@@ -1101,7 +1101,7 @@
 		ti,bit-shift = <11>;
 	};
 
-	gpt2_gate_fck: gpt2_gate_fck {
+	gpt2_gate_fck: gpt2_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -1109,7 +1109,7 @@
 		reg = <0x1000>;
 	};
 
-	gpt2_mux_fck: gpt2_mux_fck {
+	gpt2_mux_fck: gpt2_mux_fck@1040 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -1122,7 +1122,7 @@
 		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
 	};
 
-	gpt3_gate_fck: gpt3_gate_fck {
+	gpt3_gate_fck: gpt3_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -1130,7 +1130,7 @@
 		reg = <0x1000>;
 	};
 
-	gpt3_mux_fck: gpt3_mux_fck {
+	gpt3_mux_fck: gpt3_mux_fck@1040 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -1144,7 +1144,7 @@
 		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
 	};
 
-	gpt4_gate_fck: gpt4_gate_fck {
+	gpt4_gate_fck: gpt4_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -1152,7 +1152,7 @@
 		reg = <0x1000>;
 	};
 
-	gpt4_mux_fck: gpt4_mux_fck {
+	gpt4_mux_fck: gpt4_mux_fck@1040 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -1166,7 +1166,7 @@
 		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
 	};
 
-	gpt5_gate_fck: gpt5_gate_fck {
+	gpt5_gate_fck: gpt5_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -1174,7 +1174,7 @@
 		reg = <0x1000>;
 	};
 
-	gpt5_mux_fck: gpt5_mux_fck {
+	gpt5_mux_fck: gpt5_mux_fck@1040 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -1188,7 +1188,7 @@
 		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
 	};
 
-	gpt6_gate_fck: gpt6_gate_fck {
+	gpt6_gate_fck: gpt6_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -1196,7 +1196,7 @@
 		reg = <0x1000>;
 	};
 
-	gpt6_mux_fck: gpt6_mux_fck {
+	gpt6_mux_fck: gpt6_mux_fck@1040 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -1210,7 +1210,7 @@
 		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
 	};
 
-	gpt7_gate_fck: gpt7_gate_fck {
+	gpt7_gate_fck: gpt7_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -1218,7 +1218,7 @@
 		reg = <0x1000>;
 	};
 
-	gpt7_mux_fck: gpt7_mux_fck {
+	gpt7_mux_fck: gpt7_mux_fck@1040 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -1232,7 +1232,7 @@
 		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
 	};
 
-	gpt8_gate_fck: gpt8_gate_fck {
+	gpt8_gate_fck: gpt8_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -1240,7 +1240,7 @@
 		reg = <0x1000>;
 	};
 
-	gpt8_mux_fck: gpt8_mux_fck {
+	gpt8_mux_fck: gpt8_mux_fck@1040 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -1254,7 +1254,7 @@
 		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
 	};
 
-	gpt9_gate_fck: gpt9_gate_fck {
+	gpt9_gate_fck: gpt9_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&sys_ck>;
@@ -1262,7 +1262,7 @@
 		reg = <0x1000>;
 	};
 
-	gpt9_mux_fck: gpt9_mux_fck {
+	gpt9_mux_fck: gpt9_mux_fck@1040 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&omap_32k_fck>, <&sys_ck>;
@@ -1284,7 +1284,7 @@
 		clock-div = <1>;
 	};
 
-	gpio6_dbck: gpio6_dbck {
+	gpio6_dbck: gpio6_dbck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&per_32k_alwon_fck>;
@@ -1292,7 +1292,7 @@
 		ti,bit-shift = <17>;
 	};
 
-	gpio5_dbck: gpio5_dbck {
+	gpio5_dbck: gpio5_dbck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&per_32k_alwon_fck>;
@@ -1300,7 +1300,7 @@
 		ti,bit-shift = <16>;
 	};
 
-	gpio4_dbck: gpio4_dbck {
+	gpio4_dbck: gpio4_dbck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&per_32k_alwon_fck>;
@@ -1308,7 +1308,7 @@
 		ti,bit-shift = <15>;
 	};
 
-	gpio3_dbck: gpio3_dbck {
+	gpio3_dbck: gpio3_dbck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&per_32k_alwon_fck>;
@@ -1316,7 +1316,7 @@
 		ti,bit-shift = <14>;
 	};
 
-	gpio2_dbck: gpio2_dbck {
+	gpio2_dbck: gpio2_dbck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&per_32k_alwon_fck>;
@@ -1324,7 +1324,7 @@
 		ti,bit-shift = <13>;
 	};
 
-	wdt3_fck: wdt3_fck {
+	wdt3_fck: wdt3_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,wait-gate-clock";
 		clocks = <&per_32k_alwon_fck>;
@@ -1340,7 +1340,7 @@
 		clock-div = <1>;
 	};
 
-	gpio6_ick: gpio6_ick {
+	gpio6_ick: gpio6_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1348,7 +1348,7 @@
 		ti,bit-shift = <17>;
 	};
 
-	gpio5_ick: gpio5_ick {
+	gpio5_ick: gpio5_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1356,7 +1356,7 @@
 		ti,bit-shift = <16>;
 	};
 
-	gpio4_ick: gpio4_ick {
+	gpio4_ick: gpio4_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1364,7 +1364,7 @@
 		ti,bit-shift = <15>;
 	};
 
-	gpio3_ick: gpio3_ick {
+	gpio3_ick: gpio3_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1372,7 +1372,7 @@
 		ti,bit-shift = <14>;
 	};
 
-	gpio2_ick: gpio2_ick {
+	gpio2_ick: gpio2_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1380,7 +1380,7 @@
 		ti,bit-shift = <13>;
 	};
 
-	wdt3_ick: wdt3_ick {
+	wdt3_ick: wdt3_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1388,7 +1388,7 @@
 		ti,bit-shift = <12>;
 	};
 
-	uart3_ick: uart3_ick {
+	uart3_ick: uart3_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1396,7 +1396,7 @@
 		ti,bit-shift = <11>;
 	};
 
-	uart4_ick: uart4_ick {
+	uart4_ick: uart4_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1404,7 +1404,7 @@
 		ti,bit-shift = <18>;
 	};
 
-	gpt9_ick: gpt9_ick {
+	gpt9_ick: gpt9_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1412,7 +1412,7 @@
 		ti,bit-shift = <10>;
 	};
 
-	gpt8_ick: gpt8_ick {
+	gpt8_ick: gpt8_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1420,7 +1420,7 @@
 		ti,bit-shift = <9>;
 	};
 
-	gpt7_ick: gpt7_ick {
+	gpt7_ick: gpt7_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1428,7 +1428,7 @@
 		ti,bit-shift = <8>;
 	};
 
-	gpt6_ick: gpt6_ick {
+	gpt6_ick: gpt6_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1436,7 +1436,7 @@
 		ti,bit-shift = <7>;
 	};
 
-	gpt5_ick: gpt5_ick {
+	gpt5_ick: gpt5_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1444,7 +1444,7 @@
 		ti,bit-shift = <6>;
 	};
 
-	gpt4_ick: gpt4_ick {
+	gpt4_ick: gpt4_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1452,7 +1452,7 @@
 		ti,bit-shift = <5>;
 	};
 
-	gpt3_ick: gpt3_ick {
+	gpt3_ick: gpt3_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1460,7 +1460,7 @@
 		ti,bit-shift = <4>;
 	};
 
-	gpt2_ick: gpt2_ick {
+	gpt2_ick: gpt2_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1468,7 +1468,7 @@
 		ti,bit-shift = <3>;
 	};
 
-	mcbsp2_ick: mcbsp2_ick {
+	mcbsp2_ick: mcbsp2_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1476,7 +1476,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	mcbsp3_ick: mcbsp3_ick {
+	mcbsp3_ick: mcbsp3_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1484,7 +1484,7 @@
 		ti,bit-shift = <1>;
 	};
 
-	mcbsp4_ick: mcbsp4_ick {
+	mcbsp4_ick: mcbsp4_ick@1010 {
 		#clock-cells = <0>;
 		compatible = "ti,omap3-interface-clock";
 		clocks = <&per_l4_ick>;
@@ -1492,7 +1492,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	mcbsp2_gate_fck: mcbsp2_gate_fck {
+	mcbsp2_gate_fck: mcbsp2_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -1500,7 +1500,7 @@
 		reg = <0x1000>;
 	};
 
-	mcbsp3_gate_fck: mcbsp3_gate_fck {
+	mcbsp3_gate_fck: mcbsp3_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -1508,7 +1508,7 @@
 		reg = <0x1000>;
 	};
 
-	mcbsp4_gate_fck: mcbsp4_gate_fck {
+	mcbsp4_gate_fck: mcbsp4_gate_fck@1000 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-gate-clock";
 		clocks = <&mcbsp_clks>;
@@ -1516,7 +1516,7 @@
 		reg = <0x1000>;
 	};
 
-	emu_src_mux_ck: emu_src_mux_ck {
+	emu_src_mux_ck: emu_src_mux_ck@1140 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
@@ -1529,7 +1529,7 @@
 		clocks = <&emu_src_mux_ck>;
 	};
 
-	pclk_fck: pclk_fck {
+	pclk_fck: pclk_fck@1140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&emu_src_ck>;
@@ -1539,7 +1539,7 @@
 		ti,index-starts-at-one;
 	};
 
-	pclkx2_fck: pclkx2_fck {
+	pclkx2_fck: pclkx2_fck@1140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&emu_src_ck>;
@@ -1549,7 +1549,7 @@
 		ti,index-starts-at-one;
 	};
 
-	atclk_fck: atclk_fck {
+	atclk_fck: atclk_fck@1140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&emu_src_ck>;
@@ -1559,7 +1559,7 @@
 		ti,index-starts-at-one;
 	};
 
-	traceclk_src_fck: traceclk_src_fck {
+	traceclk_src_fck: traceclk_src_fck@1140 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
@@ -1567,7 +1567,7 @@
 		reg = <0x1140>;
 	};
 
-	traceclk_fck: traceclk_fck {
+	traceclk_fck: traceclk_fck@1140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&traceclk_src_fck>;
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 1a78f013f..6b39808b8 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -36,11 +36,11 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	hdmi0: connector@0 {
+	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
@@ -189,3 +189,7 @@
 	};
 };
 
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
index f2a94fa62..a90b582e4 100644
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -177,6 +177,7 @@
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
+		#clock-cells = <0>;
 		reg = <0x4b>;
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
 		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */
@@ -207,6 +208,10 @@
 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts
new file mode 100644
index 000000000..2251bd54e
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-kc1.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+
+/ {
+	model = "Amazon Kindle Fire (first generation)";
+	compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		green {
+			label = "green";
+			pwms = <&twl_pwm 0 7812500>;
+			max-brightness = <127>;
+		};
+
+		orange {
+			label = "orange";
+			pwms = <&twl_pwm 1 7812500>;
+			max-brightness = <127>;
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat0 */
+			OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat1 */
+			OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat2 */
+			OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat3 */
+			OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat4 */
+			OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat5 */
+			OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat6 */
+			OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat7 */
+			OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_clk */
+			OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_cmd */
+		>;
+	};
+
+	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* usba0_otg_ce */
+			OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dp */
+			OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dm */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* IRQ# = 7 */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+
+		twl_power: power {
+			compatible = "ti,twl6030-power";
+			ti,system-power-controller;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	vmmc-supply = <&vaux1>;
+	ti,non-removable;
+	bus-width = <8>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_otg_hs_pins>;
+
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
index 133f1b74e..78d363177 100644
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -13,8 +13,8 @@
 /* Pandaboard Rev A4+ have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index f1507bc87..f8f13952c 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -68,7 +68,7 @@
 		regulator-name = "hsusb1_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 1 0>;	/* gpio_1 */
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 		/*
@@ -98,12 +98,12 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
 
@@ -114,7 +114,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_out>;
 				};
 			};
@@ -122,14 +122,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@0 {
+	dvi0: connector0 {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -144,7 +144,7 @@
 		};
 	};
 
-	tpd12s015: encoder@1 {
+	tpd12s015: encoder1 {
 		compatible = "ti,tpd12s015";
 
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
@@ -158,7 +158,7 @@
 			port@0 {
 				reg = <0>;
 
-				tpd12s015_in: endpoint@0 {
+				tpd12s015_in: endpoint {
 					remote-endpoint = <&hdmi_out>;
 				};
 			};
@@ -166,14 +166,14 @@
 			port@1 {
 				reg = <1>;
 
-				tpd12s015_out: endpoint@0 {
+				tpd12s015_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
 		};
 	};
 
-	hdmi0: connector@1 {
+	hdmi0: connector1 {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
@@ -199,129 +199,129 @@
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 		>;
 	};
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 		>;
 	};
 
 	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
-			0x122 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
-			0x124 (PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
-			0x126 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
-			0x128 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
-			0x12a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
-			0x12c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
-			0x12e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
-			0x130 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
-			0x132 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
-			0x134 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
-			0x136 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
-
-			0x174 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
-			0x176 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
-			0x178 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
-			0x17a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
-			0x17c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
-			0x17e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
-			0x180 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
-			0x182 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
-			0x184 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
-			0x186 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
-			0x188 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
-			0x18a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
-			0x18c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
-			0x18e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
-
-			0x190 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
-			0x192 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
-			0x194 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
+			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
+
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
+
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
 		>;
 	};
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x144 (PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
+			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
 		>;
 	};
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};
 
 	hsusbb1_pins: pinmux_hsusbb1_pins {
 		pinctrl-single,pins = <
-			0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			0x84 (PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
@@ -331,24 +331,24 @@
 	 */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
-			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
 		>;
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
-			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };
@@ -356,8 +356,8 @@
 &omap4_pmx_wkup {
 	led_wkgpio_pins: pinmux_leds_wkpins {
 		pinctrl-single,pins = <
-			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 		>;
 	};
 };
@@ -376,6 +376,7 @@
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
+		#clock-cells = <0>;
 		reg = <0x4b>;
 
 		pinctrl-names = "default";
@@ -479,6 +480,10 @@
 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 2f1dabcc6..119f8e657 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -34,23 +34,23 @@
 /* PandaboardES has external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
 
 &omap4_pmx_core {
 	led_gpio_pins: gpio_led_pmx {
 		pinctrl-single,pins = <
-			0xb6 (PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
+			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
 		>;
 	};
 };
 
 &led_wkgpio_pins {
 	pinctrl-single,pins = <
-		0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+		OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 	>;
 };
 
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
index aad5dda0f..b4d19a7ae 100644
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -10,8 +10,8 @@
 /* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index dac86ed74..10d73a784 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -30,7 +30,7 @@
 		regulator-name = "VDD_ETH";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 16 0>;  /* gpio line 48 */
+		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
 		enable-active-high;
 		regulator-boot-on;
 	};
@@ -155,12 +155,12 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 22 0>;
+		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
 
-	tpd12s015: encoder@0 {
+	tpd12s015: encoder {
 		compatible = "ti,tpd12s015";
 
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
@@ -174,7 +174,7 @@
 			port@0 {
 				reg = <0>;
 
-				tpd12s015_in: endpoint@0 {
+				tpd12s015_in: endpoint {
 					remote-endpoint = <&hdmi_out>;
 				};
 			};
@@ -182,14 +182,14 @@
 			port@1 {
 				reg = <1>;
 
-				tpd12s015_out: endpoint@0 {
+				tpd12s015_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
 		};
 	};
 
-	hdmi0: connector@0 {
+	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
@@ -212,143 +212,143 @@
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			0xda (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			0xdc (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			0xde (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			0x102 (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			0x104 (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			0x106 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	uart4_pins: pinmux_uart4_pins {
 		pinctrl-single,pins = <
-			0x11c (PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
-			0x11e (PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
+			OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
+			OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
 		>;
 	};
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 		>;
 	};
 
 	dmic_pins: pinmux_dmic_pins {
 		pinctrl-single,pins = <
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
-			0xd2 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
-			0xd4 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
-			0xd6 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
+			OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
+			OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
+			OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
+			OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
 		>;
 	};
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 		>;
 	};
 
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
-			0xb6 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
-			0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
-			0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
-			0xbc (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+			OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
+			OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0xf2 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			0xf4 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			0xf6 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			0xf8 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
 		>;
 	};
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
 	/* wl12xx GPIO output for WLAN_EN */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+			OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
 		>;
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };
@@ -367,6 +367,7 @@
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
+		#clock-cells = <0>;
 		reg = <0x4b>;
 
 		pinctrl-names = "default";
@@ -374,7 +375,7 @@
 
 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */
+		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
 
 		vio-supply = <&v1v8>;
 		v2v1-supply = <&v2v1>;
@@ -620,6 +621,10 @@
 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
index f2d2fdb75..74940b6d7 100644
--- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
@@ -41,11 +41,11 @@
 			label = "user";
 			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
 			linux,code = <BTN_EXTRA>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	hdmi0: connector@0 {
+	hdmi0: connector {
 		compatible = "hdmi-connector";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmi_hpd_pins>;
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index 9bceeb7e1..1c5f6f35e 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -15,7 +15,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;	/* gpio 43 */
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;	/* gpio 43 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index a4f1ba2e1..873cfc872 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -17,7 +17,7 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	sound: sound@0 {
+	sound: sound {
 		compatible = "ti,abe-twl6040";
 		ti,model = "VAR-SOM-OM44";
 
@@ -189,6 +189,7 @@
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
+		#clock-cells = <0>;
 		reg = <0x4b>;
 
 		pinctrl-names = "default";
@@ -196,7 +197,7 @@
 
 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
+		ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */
 
 		vio-supply = <&v1v8>;
 		v2v1-supply = <&v2v1>;
@@ -252,6 +253,10 @@
 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index abc4473e6..3fdc51cd0 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -70,7 +70,7 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		clocks = <&mpu_periphclk>;
 		reg = <0x48240600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
 		interrupt-parent = <&gic>;
 	};
 
@@ -196,9 +196,10 @@
 					reg = <0x5a0 0x170>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0x5a0 0x170>;
 
-					pbias_regulator: pbias_regulator {
-						compatible = "ti,pbias-omap";
+					pbias_regulator: pbias_regulator@60 {
+						compatible = "ti,pbias-omap4", "ti,pbias-omap";
 						reg = <0x60 0x4>;
 						syscon = <&omap4_padconf_global>;
 						pbias_mmc_reg: pbias_mmc_omap4 {
@@ -347,18 +348,32 @@
 			#interrupt-cells = <2>;
 		};
 
+		elm: elm@48078000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48078000 0x2000>;
+			interrupts = <4>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
 		gpmc: gpmc@50000000 {
 			compatible = "ti,omap4430-gpmc";
 			reg = <0x50000000 0x1000>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
 			ti,no-idle-on-init;
 			clocks = <&l3_div_ck>;
 			clock-names = "fck";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
index 2bd2166f8..f370d96a8 100644
--- a/arch/arm/boot/dts/omap443x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 &prm_clocks {
-	bandgap_fclk: bandgap_fclk {
+	bandgap_fclk: bandgap_fclk@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 0adfa1d1e..fc6a8610c 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -35,7 +35,7 @@
 	};
 
 	ocp {
-		bandgap: bandgap {
+		bandgap: bandgap@4a002260 {
 			reg = <0x4a002260 0x4
 			       0x4a00232C 0x4>;
 			compatible = "ti,omap4430-bandgap";
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 194f9ef0a..ef66e12e0 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -40,13 +40,13 @@
 	};
 
 	ocp {
-		bandgap: bandgap {
+		bandgap: bandgap@4a002260 {
 			reg = <0x4a002260 0x4
 			       0x4a00232C 0x4
 			       0x4a002378 0x18>;
 			compatible = "ti,omap4460-bandgap";
 			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
-			gpios = <&gpio3 22 0>; /* tshut */
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
 
 			#thermal-sensor-cells = <0>;
 		};
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
index be033e980..fb5929b74 100644
--- a/arch/arm/boot/dts/omap446x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap446x-clocks.dtsi
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 &prm_clocks {
-	div_ts_ck: div_ts_ck {
+	div_ts_ck: div_ts_ck@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&l4_wkup_clk_mux_ck>;
@@ -17,7 +17,7 @@
 		ti,dividers = <8>, <16>, <32>;
 	};
 
-	bandgap_ts_fclk: bandgap_ts_fclk {
+	bandgap_ts_fclk: bandgap_ts_fclk@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&div_ts_ck>;
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
index f2c48f098..9573b37fb 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -20,7 +20,7 @@
 		clock-frequency = <12000000>;
 	};
 
-	pad_clks_ck: pad_clks_ck {
+	pad_clks_ck: pad_clks_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pad_clks_src_ck>;
@@ -46,7 +46,7 @@
 		clock-frequency = <12000000>;
 	};
 
-	slimbus_clk: slimbus_clk {
+	slimbus_clk: slimbus_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&slimbus_src_clk>;
@@ -132,21 +132,21 @@
 		clock-frequency = <60000000>;
 	};
 
-	dpll_abe_ck: dpll_abe_ck {
+	dpll_abe_ck: dpll_abe_ck@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
 		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
 		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
 	};
 
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
+	dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
 		clocks = <&dpll_abe_ck>;
 		reg = <0x01f0>;
 	};
 
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_x2_ck>;
@@ -165,7 +165,7 @@
 		clock-div = <8>;
 	};
 
-	abe_clk: abe_clk {
+	abe_clk: abe_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_m2x2_ck>;
@@ -174,7 +174,7 @@
 		ti,index-power-of-two;
 	};
 
-	aess_fclk: aess_fclk {
+	aess_fclk: aess_fclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&abe_clk>;
@@ -183,7 +183,7 @@
 		reg = <0x0528>;
 	};
 
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_x2_ck>;
@@ -194,7 +194,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck {
+	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
@@ -202,7 +202,7 @@
 		reg = <0x012c>;
 	};
 
-	dpll_core_ck: dpll_core_ck {
+	dpll_core_ck: dpll_core_ck@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
 		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
@@ -215,7 +215,7 @@
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_m6x2_ck: dpll_core_m6x2_ck {
+	dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -226,7 +226,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m2_ck: dpll_core_m2_ck {
+	dpll_core_m2_ck: dpll_core_m2_ck@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_ck>;
@@ -245,7 +245,7 @@
 		clock-div = <2>;
 	};
 
-	dpll_core_m5x2_ck: dpll_core_m5x2_ck {
+	dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -256,7 +256,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	div_core_ck: div_core_ck {
+	div_core_ck: div_core_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_m5x2_ck>;
@@ -264,7 +264,7 @@
 		ti,max-div = <2>;
 	};
 
-	div_iva_hs_clk: div_iva_hs_clk {
+	div_iva_hs_clk: div_iva_hs_clk@1dc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_m5x2_ck>;
@@ -273,7 +273,7 @@
 		ti,index-power-of-two;
 	};
 
-	div_mpu_hs_clk: div_mpu_hs_clk {
+	div_mpu_hs_clk: div_mpu_hs_clk@19c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_m5x2_ck>;
@@ -282,7 +282,7 @@
 		ti,index-power-of-two;
 	};
 
-	dpll_core_m4x2_ck: dpll_core_m4x2_ck {
+	dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -301,7 +301,7 @@
 		clock-div = <2>;
 	};
 
-	dpll_abe_m2_ck: dpll_abe_m2_ck {
+	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_ck>;
@@ -310,7 +310,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck {
+	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -318,7 +318,7 @@
 		reg = <0x0134>;
 	};
 
-	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -333,7 +333,7 @@
 		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
 	};
 
-	dpll_core_m7x2_ck: dpll_core_m7x2_ck {
+	dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -344,7 +344,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck {
+	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
@@ -352,7 +352,7 @@
 		reg = <0x01ac>;
 	};
 
-	dpll_iva_ck: dpll_iva_ck {
+	dpll_iva_ck: dpll_iva_ck@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
@@ -365,7 +365,7 @@
 		clocks = <&dpll_iva_ck>;
 	};
 
-	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck {
+	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_iva_x2_ck>;
@@ -376,7 +376,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck {
+	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_iva_x2_ck>;
@@ -387,14 +387,14 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck {
+	dpll_mpu_ck: dpll_mpu_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_mpu_ck>;
@@ -421,7 +421,7 @@
 		clock-div = <3>;
 	};
 
-	l3_div_ck: l3_div_ck {
+	l3_div_ck: l3_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&div_core_ck>;
@@ -430,7 +430,7 @@
 		reg = <0x0100>;
 	};
 
-	l4_div_ck: l4_div_ck {
+	l4_div_ck: l4_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&l3_div_ck>;
@@ -455,7 +455,7 @@
 		clock-div = <2>;
 	};
 
-	ocp_abe_iclk: ocp_abe_iclk {
+	ocp_abe_iclk: ocp_abe_iclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&aess_fclk>;
@@ -472,7 +472,7 @@
 		clock-div = <4>;
 	};
 
-	dmic_sync_mux_ck: dmic_sync_mux_ck {
+	dmic_sync_mux_ck: dmic_sync_mux_ck@538 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
@@ -480,7 +480,7 @@
 		reg = <0x0538>;
 	};
 
-	func_dmic_abe_gfclk: func_dmic_abe_gfclk {
+	func_dmic_abe_gfclk: func_dmic_abe_gfclk@538 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -488,7 +488,7 @@
 		reg = <0x0538>;
 	};
 
-	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
@@ -496,7 +496,7 @@
 		reg = <0x0540>;
 	};
 
-	func_mcasp_abe_gfclk: func_mcasp_abe_gfclk {
+	func_mcasp_abe_gfclk: func_mcasp_abe_gfclk@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -504,7 +504,7 @@
 		reg = <0x0540>;
 	};
 
-	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck@548 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
@@ -512,7 +512,7 @@
 		reg = <0x0548>;
 	};
 
-	func_mcbsp1_gfclk: func_mcbsp1_gfclk {
+	func_mcbsp1_gfclk: func_mcbsp1_gfclk@548 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -520,7 +520,7 @@
 		reg = <0x0548>;
 	};
 
-	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck@550 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
@@ -528,7 +528,7 @@
 		reg = <0x0550>;
 	};
 
-	func_mcbsp2_gfclk: func_mcbsp2_gfclk {
+	func_mcbsp2_gfclk: func_mcbsp2_gfclk@550 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -536,7 +536,7 @@
 		reg = <0x0550>;
 	};
 
-	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck@558 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
@@ -544,7 +544,7 @@
 		reg = <0x0558>;
 	};
 
-	func_mcbsp3_gfclk: func_mcbsp3_gfclk {
+	func_mcbsp3_gfclk: func_mcbsp3_gfclk@558 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -552,7 +552,7 @@
 		reg = <0x0558>;
 	};
 
-	slimbus1_fclk_1: slimbus1_fclk_1 {
+	slimbus1_fclk_1: slimbus1_fclk_1@560 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_24m_clk>;
@@ -560,7 +560,7 @@
 		reg = <0x0560>;
 	};
 
-	slimbus1_fclk_0: slimbus1_fclk_0 {
+	slimbus1_fclk_0: slimbus1_fclk_0@560 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&abe_24m_fclk>;
@@ -568,7 +568,7 @@
 		reg = <0x0560>;
 	};
 
-	slimbus1_fclk_2: slimbus1_fclk_2 {
+	slimbus1_fclk_2: slimbus1_fclk_2@560 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pad_clks_ck>;
@@ -576,7 +576,7 @@
 		reg = <0x0560>;
 	};
 
-	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&slimbus_clk>;
@@ -584,7 +584,7 @@
 		reg = <0x0560>;
 	};
 
-	timer5_sync_mux: timer5_sync_mux {
+	timer5_sync_mux: timer5_sync_mux@568 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
@@ -592,7 +592,7 @@
 		reg = <0x0568>;
 	};
 
-	timer6_sync_mux: timer6_sync_mux {
+	timer6_sync_mux: timer6_sync_mux@570 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
@@ -600,7 +600,7 @@
 		reg = <0x0570>;
 	};
 
-	timer7_sync_mux: timer7_sync_mux {
+	timer7_sync_mux: timer7_sync_mux@578 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
@@ -608,7 +608,7 @@
 		reg = <0x0578>;
 	};
 
-	timer8_sync_mux: timer8_sync_mux {
+	timer8_sync_mux: timer8_sync_mux@580 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
@@ -623,7 +623,7 @@
 	};
 };
 &prm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
+	sys_clkin_ck: sys_clkin_ck@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
@@ -631,7 +631,7 @@
 		ti,index-starts-at-one;
 	};
 
-	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck {
+	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
@@ -639,7 +639,7 @@
 		reg = <0x0108>;
 	};
 
-	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck {
+	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
@@ -654,14 +654,14 @@
 		clock-div = <1>;
 	};
 
-	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck {
+	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
 		reg = <0x0108>;
 	};
 
-	syc_clk_div_ck: syc_clk_div_ck {
+	syc_clk_div_ck: syc_clk_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sys_clkin_ck>;
@@ -669,7 +669,7 @@
 		ti,max-div = <2>;
 	};
 
-	gpio1_dbclk: gpio1_dbclk {
+	gpio1_dbclk: gpio1_dbclk@1838 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -677,7 +677,7 @@
 		reg = <0x1838>;
 	};
 
-	dmt1_clk_mux: dmt1_clk_mux {
+	dmt1_clk_mux: dmt1_clk_mux@1840 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
@@ -685,7 +685,7 @@
 		reg = <0x1840>;
 	};
 
-	usim_ck: usim_ck {
+	usim_ck: usim_ck@1858 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_m4x2_ck>;
@@ -694,7 +694,7 @@
 		ti,dividers = <14>, <18>;
 	};
 
-	usim_fclk: usim_fclk {
+	usim_fclk: usim_fclk@1858 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&usim_ck>;
@@ -702,7 +702,7 @@
 		reg = <0x1858>;
 	};
 
-	pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck {
+	pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck@1a20 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
@@ -710,7 +710,7 @@
 		reg = <0x1a20>;
 	};
 
-	pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck {
+	pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck@1a20 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
@@ -718,7 +718,7 @@
 		reg = <0x1a20>;
 	};
 
-	stm_clk_div_ck: stm_clk_div_ck {
+	stm_clk_div_ck: stm_clk_div_ck@1a20 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&pmd_stm_clock_mux_ck>;
@@ -728,7 +728,7 @@
 		ti,index-power-of-two;
 	};
 
-	trace_clk_div_div_ck: trace_clk_div_div_ck {
+	trace_clk_div_div_ck: trace_clk_div_div_ck@1a20 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&pmd_trace_clk_mux_ck>;
@@ -752,7 +752,7 @@
 };
 
 &cm2_clocks {
-	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck {
+	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
@@ -760,14 +760,14 @@
 		reg = <0x014c>;
 	};
 
-	dpll_per_ck: dpll_per_ck {
+	dpll_per_ck: dpll_per_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck {
+	dpll_per_m2_ck: dpll_per_m2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_ck>;
@@ -776,14 +776,14 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_per_x2_ck: dpll_per_x2_ck {
+	dpll_per_x2_ck: dpll_per_x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
 		clocks = <&dpll_per_ck>;
 		reg = <0x0150>;
 	};
 
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -794,7 +794,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck {
+	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -802,7 +802,7 @@
 		reg = <0x0154>;
 	};
 
-	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck {
+	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -817,7 +817,7 @@
 		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
 	};
 
-	dpll_per_m4x2_ck: dpll_per_m4x2_ck {
+	dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -828,7 +828,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m5x2_ck: dpll_per_m5x2_ck {
+	dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -839,7 +839,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m6x2_ck: dpll_per_m6x2_ck {
+	dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -850,7 +850,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m7x2_ck: dpll_per_m7x2_ck {
+	dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -861,14 +861,14 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_usb_ck: dpll_usb_ck {
+	dpll_usb_ck: dpll_usb_ck@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
 		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 
-	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
 		clocks = <&dpll_usb_ck>;
@@ -879,7 +879,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
+	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_usb_ck>;
@@ -890,7 +890,7 @@
 		ti,invert-autoidle-bit;
 	};
 
-	ducati_clk_mux_ck: ducati_clk_mux_ck {
+	ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
@@ -921,7 +921,7 @@
 		clock-div = <8>;
 	};
 
-	func_48m_fclk: func_48m_fclk {
+	func_48m_fclk: func_48m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_m2x2_ck>;
@@ -937,7 +937,7 @@
 		clock-div = <4>;
 	};
 
-	func_64m_fclk: func_64m_fclk {
+	func_64m_fclk: func_64m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_m4x2_ck>;
@@ -945,7 +945,7 @@
 		ti,dividers = <2>, <4>;
 	};
 
-	func_96m_fclk: func_96m_fclk {
+	func_96m_fclk: func_96m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_m2x2_ck>;
@@ -953,7 +953,7 @@
 		ti,dividers = <2>, <4>;
 	};
 
-	init_60m_fclk: init_60m_fclk {
+	init_60m_fclk: init_60m_fclk@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_usb_m2_ck>;
@@ -961,7 +961,7 @@
 		ti,dividers = <1>, <8>;
 	};
 
-	per_abe_nc_fclk: per_abe_nc_fclk {
+	per_abe_nc_fclk: per_abe_nc_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_m2_ck>;
@@ -969,7 +969,7 @@
 		ti,max-div = <2>;
 	};
 
-	aes1_fck: aes1_fck {
+	aes1_fck: aes1_fck@15a0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3_div_ck>;
@@ -977,7 +977,7 @@
 		reg = <0x15a0>;
 	};
 
-	aes2_fck: aes2_fck {
+	aes2_fck: aes2_fck@15a8 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3_div_ck>;
@@ -985,7 +985,7 @@
 		reg = <0x15a8>;
 	};
 
-	dss_sys_clk: dss_sys_clk {
+	dss_sys_clk: dss_sys_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&syc_clk_div_ck>;
@@ -993,7 +993,7 @@
 		reg = <0x1120>;
 	};
 
-	dss_tv_clk: dss_tv_clk {
+	dss_tv_clk: dss_tv_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&extalt_clkin_ck>;
@@ -1001,7 +1001,7 @@
 		reg = <0x1120>;
 	};
 
-	dss_dss_clk: dss_dss_clk {
+	dss_dss_clk: dss_dss_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_m5x2_ck>;
@@ -1010,7 +1010,7 @@
 		ti,set-rate-parent;
 	};
 
-	dss_48mhz_clk: dss_48mhz_clk {
+	dss_48mhz_clk: dss_48mhz_clk@1120 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_48mc_fclk>;
@@ -1018,7 +1018,7 @@
 		reg = <0x1120>;
 	};
 
-	fdif_fck: fdif_fck {
+	fdif_fck: fdif_fck@1028 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_m4x2_ck>;
@@ -1028,7 +1028,7 @@
 		ti,index-power-of-two;
 	};
 
-	gpio2_dbclk: gpio2_dbclk {
+	gpio2_dbclk: gpio2_dbclk@1460 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1036,7 +1036,7 @@
 		reg = <0x1460>;
 	};
 
-	gpio3_dbclk: gpio3_dbclk {
+	gpio3_dbclk: gpio3_dbclk@1468 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1044,7 +1044,7 @@
 		reg = <0x1468>;
 	};
 
-	gpio4_dbclk: gpio4_dbclk {
+	gpio4_dbclk: gpio4_dbclk@1470 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1052,7 +1052,7 @@
 		reg = <0x1470>;
 	};
 
-	gpio5_dbclk: gpio5_dbclk {
+	gpio5_dbclk: gpio5_dbclk@1478 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1060,7 +1060,7 @@
 		reg = <0x1478>;
 	};
 
-	gpio6_dbclk: gpio6_dbclk {
+	gpio6_dbclk: gpio6_dbclk@1480 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1068,7 +1068,7 @@
 		reg = <0x1480>;
 	};
 
-	sgx_clk_mux: sgx_clk_mux {
+	sgx_clk_mux: sgx_clk_mux@1220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>;
@@ -1076,7 +1076,7 @@
 		reg = <0x1220>;
 	};
 
-	hsi_fck: hsi_fck {
+	hsi_fck: hsi_fck@1338 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_m2x2_ck>;
@@ -1086,7 +1086,7 @@
 		ti,index-power-of-two;
 	};
 
-	iss_ctrlclk: iss_ctrlclk {
+	iss_ctrlclk: iss_ctrlclk@1020 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_96m_fclk>;
@@ -1094,7 +1094,7 @@
 		reg = <0x1020>;
 	};
 
-	mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck {
+	mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck@14e0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>;
@@ -1102,7 +1102,7 @@
 		reg = <0x14e0>;
 	};
 
-	per_mcbsp4_gfclk: per_mcbsp4_gfclk {
+	per_mcbsp4_gfclk: per_mcbsp4_gfclk@14e0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>;
@@ -1110,7 +1110,7 @@
 		reg = <0x14e0>;
 	};
 
-	hsmmc1_fclk: hsmmc1_fclk {
+	hsmmc1_fclk: hsmmc1_fclk@1328 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
@@ -1118,7 +1118,7 @@
 		reg = <0x1328>;
 	};
 
-	hsmmc2_fclk: hsmmc2_fclk {
+	hsmmc2_fclk: hsmmc2_fclk@1330 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
@@ -1126,7 +1126,7 @@
 		reg = <0x1330>;
 	};
 
-	ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m {
+	ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m@13e0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_48m_fclk>;
@@ -1134,7 +1134,7 @@
 		reg = <0x13e0>;
 	};
 
-	sha2md5_fck: sha2md5_fck {
+	sha2md5_fck: sha2md5_fck@15c8 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3_div_ck>;
@@ -1142,7 +1142,7 @@
 		reg = <0x15c8>;
 	};
 
-	slimbus2_fclk_1: slimbus2_fclk_1 {
+	slimbus2_fclk_1: slimbus2_fclk_1@1538 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&per_abe_24m_fclk>;
@@ -1150,7 +1150,7 @@
 		reg = <0x1538>;
 	};
 
-	slimbus2_fclk_0: slimbus2_fclk_0 {
+	slimbus2_fclk_0: slimbus2_fclk_0@1538 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_24mc_fclk>;
@@ -1158,7 +1158,7 @@
 		reg = <0x1538>;
 	};
 
-	slimbus2_slimbus_clk: slimbus2_slimbus_clk {
+	slimbus2_slimbus_clk: slimbus2_slimbus_clk@1538 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pad_slimbus_core_clks_ck>;
@@ -1166,7 +1166,7 @@
 		reg = <0x1538>;
 	};
 
-	smartreflex_core_fck: smartreflex_core_fck {
+	smartreflex_core_fck: smartreflex_core_fck@638 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4_wkup_clk_mux_ck>;
@@ -1174,7 +1174,7 @@
 		reg = <0x0638>;
 	};
 
-	smartreflex_iva_fck: smartreflex_iva_fck {
+	smartreflex_iva_fck: smartreflex_iva_fck@630 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4_wkup_clk_mux_ck>;
@@ -1182,7 +1182,7 @@
 		reg = <0x0630>;
 	};
 
-	smartreflex_mpu_fck: smartreflex_mpu_fck {
+	smartreflex_mpu_fck: smartreflex_mpu_fck@628 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4_wkup_clk_mux_ck>;
@@ -1190,7 +1190,7 @@
 		reg = <0x0628>;
 	};
 
-	cm2_dm10_mux: cm2_dm10_mux {
+	cm2_dm10_mux: cm2_dm10_mux@1428 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
@@ -1198,7 +1198,7 @@
 		reg = <0x1428>;
 	};
 
-	cm2_dm11_mux: cm2_dm11_mux {
+	cm2_dm11_mux: cm2_dm11_mux@1430 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
@@ -1206,7 +1206,7 @@
 		reg = <0x1430>;
 	};
 
-	cm2_dm2_mux: cm2_dm2_mux {
+	cm2_dm2_mux: cm2_dm2_mux@1438 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
@@ -1214,7 +1214,7 @@
 		reg = <0x1438>;
 	};
 
-	cm2_dm3_mux: cm2_dm3_mux {
+	cm2_dm3_mux: cm2_dm3_mux@1440 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
@@ -1222,7 +1222,7 @@
 		reg = <0x1440>;
 	};
 
-	cm2_dm4_mux: cm2_dm4_mux {
+	cm2_dm4_mux: cm2_dm4_mux@1448 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
@@ -1230,7 +1230,7 @@
 		reg = <0x1448>;
 	};
 
-	cm2_dm9_mux: cm2_dm9_mux {
+	cm2_dm9_mux: cm2_dm9_mux@1450 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
@@ -1238,7 +1238,7 @@
 		reg = <0x1450>;
 	};
 
-	usb_host_fs_fck: usb_host_fs_fck {
+	usb_host_fs_fck: usb_host_fs_fck@13d0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_48mc_fclk>;
@@ -1246,7 +1246,7 @@
 		reg = <0x13d0>;
 	};
 
-	utmi_p1_gfclk: utmi_p1_gfclk {
+	utmi_p1_gfclk: utmi_p1_gfclk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>;
@@ -1254,7 +1254,7 @@
 		reg = <0x1358>;
 	};
 
-	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&utmi_p1_gfclk>;
@@ -1262,7 +1262,7 @@
 		reg = <0x1358>;
 	};
 
-	utmi_p2_gfclk: utmi_p2_gfclk {
+	utmi_p2_gfclk: utmi_p2_gfclk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>;
@@ -1270,7 +1270,7 @@
 		reg = <0x1358>;
 	};
 
-	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&utmi_p2_gfclk>;
@@ -1278,7 +1278,7 @@
 		reg = <0x1358>;
 	};
 
-	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&init_60m_fclk>;
@@ -1286,7 +1286,7 @@
 		reg = <0x1358>;
 	};
 
-	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_usb_m2_ck>;
@@ -1294,7 +1294,7 @@
 		reg = <0x1358>;
 	};
 
-	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&init_60m_fclk>;
@@ -1302,7 +1302,7 @@
 		reg = <0x1358>;
 	};
 
-	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&init_60m_fclk>;
@@ -1310,7 +1310,7 @@
 		reg = <0x1358>;
 	};
 
-	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_usb_m2_ck>;
@@ -1318,7 +1318,7 @@
 		reg = <0x1358>;
 	};
 
-	usb_host_hs_func48mclk: usb_host_hs_func48mclk {
+	usb_host_hs_func48mclk: usb_host_hs_func48mclk@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_48mc_fclk>;
@@ -1326,7 +1326,7 @@
 		reg = <0x1358>;
 	};
 
-	usb_host_hs_fck: usb_host_hs_fck {
+	usb_host_hs_fck: usb_host_hs_fck@1358 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&init_60m_fclk>;
@@ -1334,7 +1334,7 @@
 		reg = <0x1358>;
 	};
 
-	otg_60m_gfclk: otg_60m_gfclk {
+	otg_60m_gfclk: otg_60m_gfclk@1360 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>;
@@ -1342,7 +1342,7 @@
 		reg = <0x1360>;
 	};
 
-	usb_otg_hs_xclk: usb_otg_hs_xclk {
+	usb_otg_hs_xclk: usb_otg_hs_xclk@1360 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&otg_60m_gfclk>;
@@ -1350,7 +1350,7 @@
 		reg = <0x1360>;
 	};
 
-	usb_otg_hs_ick: usb_otg_hs_ick {
+	usb_otg_hs_ick: usb_otg_hs_ick@1360 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3_div_ck>;
@@ -1358,7 +1358,7 @@
 		reg = <0x1360>;
 	};
 
-	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1366,7 +1366,7 @@
 		reg = <0x0640>;
 	};
 
-	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk@1368 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&init_60m_fclk>;
@@ -1374,7 +1374,7 @@
 		reg = <0x1368>;
 	};
 
-	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk@1368 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&init_60m_fclk>;
@@ -1382,7 +1382,7 @@
 		reg = <0x1368>;
 	};
 
-	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk@1368 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&init_60m_fclk>;
@@ -1390,7 +1390,7 @@
 		reg = <0x1368>;
 	};
 
-	usb_tll_hs_ick: usb_tll_hs_ick {
+	usb_tll_hs_ick: usb_tll_hs_ick@1368 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l4_div_ck>;
@@ -1407,7 +1407,7 @@
 };
 
 &scrm_clocks {
-	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1415,7 +1415,7 @@
 		reg = <0x0310>;
 	};
 
-	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1429,7 +1429,7 @@
 		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
 	};
 
-	auxclk0_ck: auxclk0_ck {
+	auxclk0_ck: auxclk0_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk0_src_ck>;
@@ -1438,7 +1438,7 @@
 		reg = <0x0310>;
 	};
 
-	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1446,7 +1446,7 @@
 		reg = <0x0314>;
 	};
 
-	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1460,7 +1460,7 @@
 		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
 	};
 
-	auxclk1_ck: auxclk1_ck {
+	auxclk1_ck: auxclk1_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk1_src_ck>;
@@ -1469,7 +1469,7 @@
 		reg = <0x0314>;
 	};
 
-	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1477,7 +1477,7 @@
 		reg = <0x0318>;
 	};
 
-	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1491,7 +1491,7 @@
 		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
 	};
 
-	auxclk2_ck: auxclk2_ck {
+	auxclk2_ck: auxclk2_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk2_src_ck>;
@@ -1500,7 +1500,7 @@
 		reg = <0x0318>;
 	};
 
-	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1508,7 +1508,7 @@
 		reg = <0x031c>;
 	};
 
-	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1522,7 +1522,7 @@
 		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
 	};
 
-	auxclk3_ck: auxclk3_ck {
+	auxclk3_ck: auxclk3_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk3_src_ck>;
@@ -1531,7 +1531,7 @@
 		reg = <0x031c>;
 	};
 
-	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1539,7 +1539,7 @@
 		reg = <0x0320>;
 	};
 
-	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1553,7 +1553,7 @@
 		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
 	};
 
-	auxclk4_ck: auxclk4_ck {
+	auxclk4_ck: auxclk4_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk4_src_ck>;
@@ -1562,7 +1562,7 @@
 		reg = <0x0320>;
 	};
 
-	auxclk5_src_gate_ck: auxclk5_src_gate_ck {
+	auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1570,7 +1570,7 @@
 		reg = <0x0324>;
 	};
 
-	auxclk5_src_mux_ck: auxclk5_src_mux_ck {
+	auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1584,7 +1584,7 @@
 		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
 	};
 
-	auxclk5_ck: auxclk5_ck {
+	auxclk5_ck: auxclk5_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk5_src_ck>;
@@ -1593,7 +1593,7 @@
 		reg = <0x0324>;
 	};
 
-	auxclkreq0_ck: auxclkreq0_ck {
+	auxclkreq0_ck: auxclkreq0_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
@@ -1601,7 +1601,7 @@
 		reg = <0x0210>;
 	};
 
-	auxclkreq1_ck: auxclkreq1_ck {
+	auxclkreq1_ck: auxclkreq1_ck@214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
@@ -1609,7 +1609,7 @@
 		reg = <0x0214>;
 	};
 
-	auxclkreq2_ck: auxclkreq2_ck {
+	auxclkreq2_ck: auxclkreq2_ck@218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
@@ -1617,7 +1617,7 @@
 		reg = <0x0218>;
 	};
 
-	auxclkreq3_ck: auxclkreq3_ck {
+	auxclkreq3_ck: auxclkreq3_ck@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
@@ -1625,7 +1625,7 @@
 		reg = <0x021c>;
 	};
 
-	auxclkreq4_ck: auxclkreq4_ck {
+	auxclkreq4_ck: auxclkreq4_ck@220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
@@ -1633,7 +1633,7 @@
 		reg = <0x0220>;
 	};
 
-	auxclkreq5_ck: auxclkreq5_ck {
+	auxclkreq5_ck: auxclkreq5_ck@224 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
new file mode 100644
index 000000000..519611320
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -0,0 +1,747 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vsys_cobra: fixedregulator-vsys_cobra {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_cobra";
+		vin-supply = <&vmain>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdds_1v8_main: fixedregulator-vdds_1v8_main {
+		compatible = "regulator-fixed";
+		regulator-name = "vdds_1v8_main";
+		vin-supply = <&smps7_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vmmcsd_fixed: fixedregulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	mmc3_pwrseq: sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clk32kgaudio>;
+		clock-names = "ext_clock";
+	};
+
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsdio_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;	/* gpio140 WLAN_EN */
+		enable-active-high;
+		startup-delay-us = <70000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
+		clocks = <&auxclk1_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		/* gpios defined in the board specific dts */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "b";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "omap5-uevm";
+
+		ti,mclk-freq = <19200000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+};
+
+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	p234 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_pins
+			&led_gpio_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
+			OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
+			OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
+			OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
+			OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
+			OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
+			OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
+			OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
+			OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
+			OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
+			OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
+			OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
+			OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
+		>;
+	};
+
+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas_msecure_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+			OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+			OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+			OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+		>;
+	};
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+			OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+			OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+		>;
+	};
+
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+			OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+			OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+			OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
+		>;
+	};
+};
+
+&omap5_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_wkup_pins
+	>;
+
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
+		>;
+	};
+
+	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+		>;
+	};
+
+	wlcore_irq_pin: pinmux_wlcore_irq_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>;
+	interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap5_pmx_core 0x168>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
+
+		clk32kgaudio: palmas_clk32k@1 {
+			compatible = "ti,palmas-clk32kgaudio";
+			#clock-cells = <0>;
+		};
+
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
+		gpadc {
+			compatible = "ti,palmas-gpadc";
+			interrupts = <18 0
+				      16 0
+				      17 0>;
+			#io-channel-cells = <1>;
+			ti,channel0-current-microamp = <5>;
+			ti,channel3-current-microamp = <10>;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-names = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			smps123-in-supply = <&vsys_cobra>;
+			smps45-in-supply = <&vsys_cobra>;
+			smps6-in-supply = <&vsys_cobra>;
+			smps7-in-supply = <&vsys_cobra>;
+			smps8-in-supply = <&vsys_cobra>;
+			smps9-in-supply = <&vsys_cobra>;
+			smps10_out2-in-supply = <&vsys_cobra>;
+			smps10_out1-in-supply = <&vsys_cobra>;
+			ldo1-in-supply = <&vsys_cobra>;
+			ldo2-in-supply = <&vsys_cobra>;
+			ldo3-in-supply = <&vdds_1v8_main>;
+			ldo4-in-supply = <&vdds_1v8_main>;
+			ldo5-in-supply = <&vsys_cobra>;
+			ldo6-in-supply = <&vdds_1v8_main>;
+			ldo7-in-supply = <&vsys_cobra>;
+			ldo8-in-supply = <&vsys_cobra>;
+			ldo9-in-supply = <&vmmcsd_fixed>;
+			ldoln-in-supply = <&vsys_cobra>;
+			ldousb-in-supply = <&vsys_cobra>;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2100000>;
+					ti,smps-range = <0x80>;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		palmas_power_button: palmas_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&palmas>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
+
+		/* audpwron gpio defined in the board specific dts */
+
+		vio-supply = <&smps7_reg>;
+		v2v1-supply = <&smps9_reg>;
+		enable-active-high;
+
+		clocks = <&clk32kgaudio>;
+		clock-names = "clk32k";
+	};
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+
+	status = "okay";
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			      <&omap5_pmx_core 0x19c>;
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+
+	/* vdda-supply populated in board specific dts file */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 61ad2ea34..a9765605d 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -112,7 +112,7 @@
                 };
         };
 
-	hdmi0: connector@0 {
+	hdmi0: connector0 {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 
@@ -130,7 +130,7 @@
 		};
 	};
 
-	tfp410: encoder@0 {
+	tfp410: encoder0 {
 		compatible = "ti,tfp410";
 
 		ports {
@@ -140,7 +140,7 @@
 			port@0 {
 				reg = <0>;
 
-				tfp410_in: endpoint@0 {
+				tfp410_in: endpoint {
 					remote-endpoint = <&dpi_dvi_out>;
 				};
 			};
@@ -148,14 +148,14 @@
 			port@1 {
 				reg = <1>;
 
-				tfp410_out: endpoint@0 {
+				tfp410_out: endpoint {
 					remote-endpoint = <&dvi_connector_in>;
 				};
 			};
 		};
 	};
 
-	dvi0: connector@1 {
+	dvi0: connector1 {
 		compatible = "dvi-connector";
 		label = "dvi";
 
@@ -175,7 +175,7 @@
 
 	ads7846_pins: pinmux_ads7846_pins {
 		pinctrl-single,pins = <
-			0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
+			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
 		>;
 	};
 };
@@ -344,7 +344,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 0>;
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
@@ -359,7 +359,7 @@
 		ti,debounce-tol = /bits/ 16 <10>;
 		ti,debounce-rep = /bits/ 16 <1>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -434,7 +434,7 @@
 			compatible = "ti,palmas-pmic";
 			interrupt-parent = <&palmas>;
 			interrupts = <14 IRQ_TYPE_NONE>;
-			interrupt-name = "short-irq";
+			interrupt-names = "short-irq";
 
 			ti,ldo6-vibrator;
 
@@ -513,7 +513,7 @@
 				ldo1_reg: ldo1 {
 					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
@@ -537,7 +537,7 @@
 				ldo4_reg: ldo4 {
 					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
 					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
@@ -646,12 +646,17 @@
 	pinctrl-0 = <&dss_dpi_pins>;
 
 	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		dpi_dvi_out: endpoint@0 {
+			reg = <0>;
 			remote-endpoint = <&tfp410_in>;
 			data-lines = <24>;
 		};
 
 		dpi_lcd_out: endpoint@1 {
+			reg = <1>;
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
new file mode 100644
index 000000000..f75ce02fb
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap5-board-common.dtsi"
+
+/ {
+	model = "IGEPv5";
+	compatible = "isee,omap5-igep0050", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7f000000>; /* 2032 MB */
+	};
+};
+
+&hdmi {
+	vdda-supply = <&ldo7_reg>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	tca6416: tca6416@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+/* LDO4 is VPP1 - ball AD9 */
+&ldo4_reg {
+	regulator-min-microvolt = <2000000>;
+	regulator-max-microvolt = <2000000>;
+};
+
+/*
+ * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
+ * VDDA_HDMI - ball AN25
+ */
+&ldo7_reg {
+	status = "okay";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&omap5_pmx_core {
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* i2c4_scl */
+			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+};
+
+&tpd12s015 {
+	gpios = <&tca6416 11 0>,	/* TCA6416 P01, CT_CP_HDP */
+		<&tca6416 12 0>,	/* TCA6416 P00, LS_OE*/
+		<&gpio7 1 0>,		/* 193, HPD */
+		<&gpio7 2 0>,		/* 194, SCL */
+		<&gpio7 3 0>;		/* 195, SDA */
+};
+
+&twl6040 {
+	ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>;  /* gpio line 144 */
+};
+
+&twl6040_pins {
+	pinctrl-single,pins = <
+		OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_144 */
+		OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6)	/* perslimbus2_clock.gpio5_145 */
+	>;
+};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 275618f19..a51e60518 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -7,9 +7,7 @@
  */
 /dts-v1/;
 
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "omap5-board-common.dtsi"
 
 / {
 	model = "TI OMAP5 uEVM board";
@@ -19,516 +17,10 @@
 		device_type = "memory";
 		reg = <0x80000000 0x7F000000>; /* 2032 MB */
 	};
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	vmmcsd_fixed: fixedregulator-mmcsd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
-		clocks = <&auxclk1_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* HS USB Host PHY on PORT 3 */
-	hsusb3_phy: hsusb3_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "omap5:blue:usr1";
-			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	tpd12s015: encoder@0 {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
-			<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
-			<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "b";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "omap5-uevm";
-
-		ti,mclk-freq = <19200000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-};
-
-&omap5_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_pins
-			&led_gpio_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
-			0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
-			0x160 (PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
-			0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
-			0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
-			0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
-			0x158 (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
-			0x15a (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			0x184 (PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
-			0x186 (PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
-			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
-			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
-		>;
-	};
-
-	mcspi3_pins: pinmux_mcspi3_pins {
-		pinctrl-single,pins = <
-			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
-			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
-			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
-			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
-		>;
-	};
-
-	mcspi4_pins: pinmux_mcspi4_pins {
-		pinctrl-single,pins = <
-			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_clk */
-			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_simo */
-			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi4_somi */
-			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi4_cs0 */
-		>;
-	};
-
-	usbhost_pins: pinmux_usbhost_pins {
-		pinctrl-single,pins = <
-			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
-			0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
-
-			0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
-			0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
-
-			0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
-			0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
-		>;
-	};
-
-	led_gpio_pins: pinmux_led_gpio_pins {
-		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
-			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
-			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
-		>;
-	};
-
-	uart5_pins: pinmux_uart5_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
-			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
-			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
-			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x100 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
-			0x102 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
-		>;
-	};
 };
 
-&omap5_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_wkup_pins
-	>;
-
-	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
-		pinctrl-single,pins = <
-			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo9_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	palmas: palmas@48 {
-		compatible = "ti,palmas";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
-		reg = <0x48>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,system-power-controller;
-
-		extcon_usb3: palmas_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			ti,wakeup;
-		};
-
-		clk32kgaudio: palmas_clk32k@1 {
-			compatible = "ti,palmas-clk32kgaudio";
-			#clock-cells = <0>;
-		};
-
-		palmas_pmic {
-			compatible = "ti,palmas-pmic";
-			interrupt-parent = <&palmas>;
-			interrupts = <14 IRQ_TYPE_NONE>;
-			interrupt-name = "short-irq";
-
-			ti,ldo6-vibrator;
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_OPP_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_OPP_MM */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_DDR3 - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_OPP_CORE */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDA_2v1_AUD over VDD_2v1 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2100000>;
-					ti,smps-range = <0x80>;
-				};
-
-				smps10_out2_reg: smps10_out2 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out2";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out1_reg: smps10_out1 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out1";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-				};
-
-				ldo1_reg: ldo1 {
-					/* VDDAPHY_CAM: vdda_csiport */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VCC_2V8_DISP: Does not go anywhere */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDAPHY_MDM: vdda_lli */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					/* Only if Modem is used */
-					status = "disabled";
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: ldo6 {
-					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
-					regulator-name = "ldo6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo7_reg: ldo7 {
-					/* VDD_VPP: vpp1 */
-					regulator-name = "ldo7";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					/* Only for efuse reprograming! */
-					status = "disabled";
-				};
-
-				ldo8_reg: ldo8 {
-					/* VDD_3v0: Does not go anywhere */
-					regulator-name = "ldo8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo9_reg: ldo9 {
-					/* VCC_DV_SDIO: vdds_sdcard */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3250000>;
-					regulator-max-microvolt = <3250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen3_reg: regen3 {
-					/* REGEN3 controls LDO9 supply to card */
-					regulator-name = "regen3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio5 13 0>;  /* gpio line 141 */
-
-		vio-supply = <&smps7_reg>;
-		v2v1-supply = <&smps9_reg>;
-		enable-active-high;
-
-		clocks = <&clk32kgaudio>;
-		clock-names = "clk32k";
-	};
+&hdmi {
+	vdda-supply = <&ldo4_reg>;
 };
 
 &i2c5 {
@@ -545,92 +37,27 @@
 	};
 };
 
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&usbhshost {
-	port2-mode = "ehci-hsic";
-	port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&usb3 {
-	extcon = <&extcon_usb3>;
-	vbus-supply = <&smps10_out1_reg>;
-};
-
-&mcspi1 {
-
-};
-
-&mcspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-};
-
-&mcspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi3_pins>;
-};
-
-&mcspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi4_pins>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-			      <&omap5_pmx_core 0x19c>;
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
+&omap5_pmx_core {
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
+			OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
+		>;
+	};
 };
 
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
+&tpd12s015 {
+	gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
+		<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
+		<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
 };
 
-&dss {
-	status = "ok";
+&twl6040 {
+	ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
 };
 
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo4_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
+&twl6040_pins {
+	pinctrl-single,pins = <
+		OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+	>;
 };
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b1a1263e6..84c10195e 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -185,9 +185,10 @@
 					reg = <0x5a0 0xec>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0x5a0 0xec>;
 
-					pbias_regulator: pbias_regulator {
-						compatible = "ti,pbias-omap";
+					pbias_regulator: pbias_regulator@60 {
+						compatible = "ti,pbias-omap5", "ti,pbias-omap";
 						reg = <0x60 0x4>;
 						syscon = <&omap5_padconf_global>;
 						pbias_mmc_reg: pbias_mmc_omap5 {
@@ -268,7 +269,7 @@
 			omap5_pmx_wkup: pinmux@c840 {
 				compatible = "ti,omap5-padconf",
 					     "pinctrl-single";
-				reg = <0xc840 0x0038>;
+				reg = <0xc840 0x003c>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				#interrupt-cells = <1>;
@@ -390,11 +391,17 @@
 			#address-cells = <2>;
 			#size-cells = <1>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
 			clocks = <&l3_iclk_div>;
 			clock-names = "fck";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		i2c1: i2c@48070000 {
@@ -849,18 +856,6 @@
 			hw-caps-temp-alert;
 		};
 
-		omap_control_usb2phy: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
 		usb3: omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
@@ -873,11 +868,15 @@
 			dwc3@4a030000 {
 				compatible = "snps,dwc3";
 				reg = <0x4a030000 0x10000>;
-				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy>, <&usb3_phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				dr_mode = "peripheral";
-				tx-fifo-resize;
 			};
 		};
 
@@ -891,7 +890,7 @@
 			usb2_phy: usb2phy@4a084000 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
-				ctrl-module = <&omap_control_usb2phy>;
+				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
 				clock-names = "wkupclk", "refclk";
 				#phy-cells = <0>;
@@ -903,7 +902,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy>;
+				syscon-phy-power = <&scm_conf 0x370>;
 				clocks = <&usb_phy_cm_clk32k>,
 					 <&sys_clkin>,
 					 <&usb_otg_ss_refclk960m>;
@@ -959,14 +958,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin>;
-			clock-names = "sysclk";
-		};
-
 		/* OCP2SCP3 */
 		ocp2scp@4a090000 {
 			compatible = "ti,omap-ocp2scp";
@@ -981,7 +972,7 @@
 				      <0x4A096400 0x64>, /* phy_tx */
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
+				syscon-phy-power = <&scm_conf 0x374>;
 				clocks = <&sys_clkin>, <&sata_ref_clk>;
 				clock-names = "sysclk", "refclk";
 				#phy-cells = <0>;
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 83b425fb3..4899c2359 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -14,7 +14,7 @@
 		clock-frequency = <12000000>;
 	};
 
-	pad_clks_ck: pad_clks_ck {
+	pad_clks_ck: pad_clks_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pad_clks_src_ck>;
@@ -34,7 +34,7 @@
 		clock-frequency = <12000000>;
 	};
 
-	slimbus_clk: slimbus_clk {
+	slimbus_clk: slimbus_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&slimbus_src_clk>;
@@ -102,7 +102,7 @@
 		clock-frequency = <60000000>;
 	};
 
-	dpll_abe_ck: dpll_abe_ck {
+	dpll_abe_ck: dpll_abe_ck@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
 		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
@@ -115,7 +115,7 @@
 		clocks = <&dpll_abe_ck>;
 	};
 
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_x2_ck>;
@@ -132,7 +132,7 @@
 		clock-div = <8>;
 	};
 
-	abe_clk: abe_clk {
+	abe_clk: abe_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_m2x2_ck>;
@@ -141,7 +141,7 @@
 		ti,index-power-of-two;
 	};
 
-	abe_iclk: abe_iclk {
+	abe_iclk: abe_iclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&aess_fclk>;
@@ -158,7 +158,7 @@
 		clock-div = <16>;
 	};
 
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_abe_x2_ck>;
@@ -167,7 +167,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_byp_mux: dpll_core_byp_mux {
+	dpll_core_byp_mux: dpll_core_byp_mux@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
@@ -175,7 +175,7 @@
 		reg = <0x012c>;
 	};
 
-	dpll_core_ck: dpll_core_ck {
+	dpll_core_ck: dpll_core_ck@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
 		clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
@@ -188,7 +188,7 @@
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_h21x2_ck: dpll_core_h21x2_ck {
+	dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -213,7 +213,7 @@
 		clock-div = <2>;
 	};
 
-	dpll_core_h11x2_ck: dpll_core_h11x2_ck {
+	dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -222,7 +222,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -231,7 +231,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -240,7 +240,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -249,7 +249,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -258,7 +258,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -267,7 +267,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -276,7 +276,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m2_ck: dpll_core_m2_ck {
+	dpll_core_m2_ck: dpll_core_m2_ck@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_ck>;
@@ -285,7 +285,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_core_x2_ck>;
@@ -302,7 +302,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_iva_byp_mux: dpll_iva_byp_mux {
+	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
@@ -310,7 +310,7 @@
 		reg = <0x01ac>;
 	};
 
-	dpll_iva_ck: dpll_iva_ck {
+	dpll_iva_ck: dpll_iva_ck@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
@@ -323,7 +323,7 @@
 		clocks = <&dpll_iva_ck>;
 	};
 
-	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck {
+	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_iva_x2_ck>;
@@ -332,7 +332,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck {
+	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_iva_x2_ck>;
@@ -349,14 +349,14 @@
 		clock-div = <1>;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck {
+	dpll_mpu_ck: dpll_mpu_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap5-mpu-dpll-clock";
 		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_mpu_ck>;
@@ -381,7 +381,7 @@
 		clock-div = <3>;
 	};
 
-	l3_iclk_div: l3_iclk_div {
+	l3_iclk_div: l3_iclk_div@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		ti,max-div = <2>;
@@ -399,7 +399,7 @@
 		clock-div = <1>;
 	};
 
-	l4_root_clk_div: l4_root_clk_div {
+	l4_root_clk_div: l4_root_clk_div@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		ti,max-div = <2>;
@@ -409,7 +409,7 @@
 		ti,index-power-of-two;
 	};
 
-	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&slimbus_clk>;
@@ -417,7 +417,7 @@
 		reg = <0x0560>;
 	};
 
-	aess_fclk: aess_fclk {
+	aess_fclk: aess_fclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&abe_clk>;
@@ -426,7 +426,7 @@
 		reg = <0x0528>;
 	};
 
-	dmic_sync_mux_ck: dmic_sync_mux_ck {
+	dmic_sync_mux_ck: dmic_sync_mux_ck@538 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
@@ -434,7 +434,7 @@
 		reg = <0x0538>;
 	};
 
-	dmic_gfclk: dmic_gfclk {
+	dmic_gfclk: dmic_gfclk@538 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -442,7 +442,7 @@
 		reg = <0x0538>;
 	};
 
-	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
@@ -450,7 +450,7 @@
 		reg = <0x0540>;
 	};
 
-	mcasp_gfclk: mcasp_gfclk {
+	mcasp_gfclk: mcasp_gfclk@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -458,7 +458,7 @@
 		reg = <0x0540>;
 	};
 
-	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck@548 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
@@ -466,7 +466,7 @@
 		reg = <0x0548>;
 	};
 
-	mcbsp1_gfclk: mcbsp1_gfclk {
+	mcbsp1_gfclk: mcbsp1_gfclk@548 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -474,7 +474,7 @@
 		reg = <0x0548>;
 	};
 
-	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck@550 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
@@ -482,7 +482,7 @@
 		reg = <0x0550>;
 	};
 
-	mcbsp2_gfclk: mcbsp2_gfclk {
+	mcbsp2_gfclk: mcbsp2_gfclk@550 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -490,7 +490,7 @@
 		reg = <0x0550>;
 	};
 
-	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck@558 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
@@ -498,7 +498,7 @@
 		reg = <0x0558>;
 	};
 
-	mcbsp3_gfclk: mcbsp3_gfclk {
+	mcbsp3_gfclk: mcbsp3_gfclk@558 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
@@ -506,7 +506,7 @@
 		reg = <0x0558>;
 	};
 
-	timer5_gfclk_mux: timer5_gfclk_mux {
+	timer5_gfclk_mux: timer5_gfclk_mux@568 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
@@ -514,7 +514,7 @@
 		reg = <0x0568>;
 	};
 
-	timer6_gfclk_mux: timer6_gfclk_mux {
+	timer6_gfclk_mux: timer6_gfclk_mux@570 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
@@ -522,7 +522,7 @@
 		reg = <0x0570>;
 	};
 
-	timer7_gfclk_mux: timer7_gfclk_mux {
+	timer7_gfclk_mux: timer7_gfclk_mux@578 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
@@ -530,7 +530,7 @@
 		reg = <0x0578>;
 	};
 
-	timer8_gfclk_mux: timer8_gfclk_mux {
+	timer8_gfclk_mux: timer8_gfclk_mux@580 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
@@ -545,7 +545,7 @@
 	};
 };
 &prm_clocks {
-	sys_clkin: sys_clkin {
+	sys_clkin: sys_clkin@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
@@ -553,14 +553,14 @@
 		ti,index-starts-at-one;
 	};
 
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
 		reg = <0x0108>;
 	};
 
-	abe_dpll_clk_mux: abe_dpll_clk_mux {
+	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
@@ -583,7 +583,7 @@
 		clock-div = <1>;
 	};
 
-	wkupaon_iclk_mux: wkupaon_iclk_mux {
+	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
@@ -598,7 +598,7 @@
 		clock-div = <1>;
 	};
 
-	gpio1_dbclk: gpio1_dbclk {
+	gpio1_dbclk: gpio1_dbclk@1938 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -606,7 +606,7 @@
 		reg = <0x1938>;
 	};
 
-	timer1_gfclk_mux: timer1_gfclk_mux {
+	timer1_gfclk_mux: timer1_gfclk_mux@1940 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
@@ -616,7 +616,7 @@
 };
 &cm_core_clocks {
 
-	dpll_per_byp_mux: dpll_per_byp_mux {
+	dpll_per_byp_mux: dpll_per_byp_mux@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
@@ -624,7 +624,7 @@
 		reg = <0x014c>;
 	};
 
-	dpll_per_ck: dpll_per_ck {
+	dpll_per_ck: dpll_per_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
@@ -637,7 +637,7 @@
 		clocks = <&dpll_per_ck>;
 	};
 
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -646,7 +646,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -655,7 +655,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -664,7 +664,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck {
+	dpll_per_m2_ck: dpll_per_m2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_ck>;
@@ -673,7 +673,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -682,7 +682,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_x2_ck>;
@@ -691,7 +691,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_unipro1_ck: dpll_unipro1_ck {
+	dpll_unipro1_ck: dpll_unipro1_ck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin>, <&sys_clkin>;
@@ -706,7 +706,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck {
+	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_unipro1_ck>;
@@ -715,7 +715,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_unipro2_ck: dpll_unipro2_ck {
+	dpll_unipro2_ck: dpll_unipro2_ck@1c0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
 		clocks = <&sys_clkin>, <&sys_clkin>;
@@ -730,7 +730,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck {
+	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_unipro2_ck>;
@@ -739,7 +739,7 @@
 		ti,index-starts-at-one;
 	};
 
-	dpll_usb_byp_mux: dpll_usb_byp_mux {
+	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
@@ -747,7 +747,7 @@
 		reg = <0x018c>;
 	};
 
-	dpll_usb_ck: dpll_usb_ck {
+	dpll_usb_ck: dpll_usb_ck@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
 		clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
@@ -762,7 +762,7 @@
 		clock-div = <1>;
 	};
 
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
+	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_usb_ck>;
@@ -811,7 +811,7 @@
 		clock-div = <2>;
 	};
 
-	l3init_60m_fclk: l3init_60m_fclk {
+	l3init_60m_fclk: l3init_60m_fclk@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_usb_m2_ck>;
@@ -819,7 +819,7 @@
 		ti,dividers = <1>, <8>;
 	};
 
-	dss_32khz_clk: dss_32khz_clk {
+	dss_32khz_clk: dss_32khz_clk@1420 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -827,7 +827,7 @@
 		reg = <0x1420>;
 	};
 
-	dss_48mhz_clk: dss_48mhz_clk {
+	dss_48mhz_clk: dss_48mhz_clk@1420 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_48m_fclk>;
@@ -835,7 +835,7 @@
 		reg = <0x1420>;
 	};
 
-	dss_dss_clk: dss_dss_clk {
+	dss_dss_clk: dss_dss_clk@1420 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_per_h12x2_ck>;
@@ -844,7 +844,7 @@
 		ti,set-rate-parent;
 	};
 
-	dss_sys_clk: dss_sys_clk {
+	dss_sys_clk: dss_sys_clk@1420 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dss_syc_gfclk_div>;
@@ -852,7 +852,7 @@
 		reg = <0x1420>;
 	};
 
-	gpio2_dbclk: gpio2_dbclk {
+	gpio2_dbclk: gpio2_dbclk@1060 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -860,7 +860,7 @@
 		reg = <0x1060>;
 	};
 
-	gpio3_dbclk: gpio3_dbclk {
+	gpio3_dbclk: gpio3_dbclk@1068 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -868,7 +868,7 @@
 		reg = <0x1068>;
 	};
 
-	gpio4_dbclk: gpio4_dbclk {
+	gpio4_dbclk: gpio4_dbclk@1070 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -876,7 +876,7 @@
 		reg = <0x1070>;
 	};
 
-	gpio5_dbclk: gpio5_dbclk {
+	gpio5_dbclk: gpio5_dbclk@1078 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -884,7 +884,7 @@
 		reg = <0x1078>;
 	};
 
-	gpio6_dbclk: gpio6_dbclk {
+	gpio6_dbclk: gpio6_dbclk@1080 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -892,7 +892,7 @@
 		reg = <0x1080>;
 	};
 
-	gpio7_dbclk: gpio7_dbclk {
+	gpio7_dbclk: gpio7_dbclk@1110 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -900,7 +900,7 @@
 		reg = <0x1110>;
 	};
 
-	gpio8_dbclk: gpio8_dbclk {
+	gpio8_dbclk: gpio8_dbclk@1118 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -908,7 +908,7 @@
 		reg = <0x1118>;
 	};
 
-	iss_ctrlclk: iss_ctrlclk {
+	iss_ctrlclk: iss_ctrlclk@1320 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&func_96m_fclk>;
@@ -916,7 +916,7 @@
 		reg = <0x1320>;
 	};
 
-	lli_txphy_clk: lli_txphy_clk {
+	lli_txphy_clk: lli_txphy_clk@f20 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_unipro1_clkdcoldo>;
@@ -924,7 +924,7 @@
 		reg = <0x0f20>;
 	};
 
-	lli_txphy_ls_clk: lli_txphy_ls_clk {
+	lli_txphy_ls_clk: lli_txphy_ls_clk@f20 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_unipro1_m2_ck>;
@@ -932,7 +932,7 @@
 		reg = <0x0f20>;
 	};
 
-	mmc1_32khz_clk: mmc1_32khz_clk {
+	mmc1_32khz_clk: mmc1_32khz_clk@1628 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -940,7 +940,7 @@
 		reg = <0x1628>;
 	};
 
-	sata_ref_clk: sata_ref_clk {
+	sata_ref_clk: sata_ref_clk@1688 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_clkin>;
@@ -948,7 +948,7 @@
 		reg = <0x1688>;
 	};
 
-	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_usb_m2_ck>;
@@ -956,7 +956,7 @@
 		reg = <0x1658>;
 	};
 
-	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_usb_m2_ck>;
@@ -964,7 +964,7 @@
 		reg = <0x1658>;
 	};
 
-	usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk {
+	usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_usb_m2_ck>;
@@ -972,7 +972,7 @@
 		reg = <0x1658>;
 	};
 
-	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3init_60m_fclk>;
@@ -980,7 +980,7 @@
 		reg = <0x1658>;
 	};
 
-	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3init_60m_fclk>;
@@ -988,7 +988,7 @@
 		reg = <0x1658>;
 	};
 
-	usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk {
+	usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3init_60m_fclk>;
@@ -996,7 +996,7 @@
 		reg = <0x1658>;
 	};
 
-	utmi_p1_gfclk: utmi_p1_gfclk {
+	utmi_p1_gfclk: utmi_p1_gfclk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>;
@@ -1004,7 +1004,7 @@
 		reg = <0x1658>;
 	};
 
-	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&utmi_p1_gfclk>;
@@ -1012,7 +1012,7 @@
 		reg = <0x1658>;
 	};
 
-	utmi_p2_gfclk: utmi_p2_gfclk {
+	utmi_p2_gfclk: utmi_p2_gfclk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>;
@@ -1020,7 +1020,7 @@
 		reg = <0x1658>;
 	};
 
-	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&utmi_p2_gfclk>;
@@ -1028,7 +1028,7 @@
 		reg = <0x1658>;
 	};
 
-	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk@1658 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3init_60m_fclk>;
@@ -1036,7 +1036,7 @@
 		reg = <0x1658>;
 	};
 
-	usb_otg_ss_refclk960m: usb_otg_ss_refclk960m {
+	usb_otg_ss_refclk960m: usb_otg_ss_refclk960m@16f0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&dpll_usb_clkdcoldo>;
@@ -1044,7 +1044,7 @@
 		reg = <0x16f0>;
 	};
 
-	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_32k_ck>;
@@ -1052,7 +1052,7 @@
 		reg = <0x0640>;
 	};
 
-	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk@1668 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3init_60m_fclk>;
@@ -1060,7 +1060,7 @@
 		reg = <0x1668>;
 	};
 
-	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk@1668 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3init_60m_fclk>;
@@ -1068,7 +1068,7 @@
 		reg = <0x1668>;
 	};
 
-	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk@1668 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&l3init_60m_fclk>;
@@ -1076,7 +1076,7 @@
 		reg = <0x1668>;
 	};
 
-	fdif_fclk: fdif_fclk {
+	fdif_fclk: fdif_fclk@1328 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_h11x2_ck>;
@@ -1085,7 +1085,7 @@
 		reg = <0x1328>;
 	};
 
-	gpu_core_gclk_mux: gpu_core_gclk_mux {
+	gpu_core_gclk_mux: gpu_core_gclk_mux@1520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
@@ -1093,7 +1093,7 @@
 		reg = <0x1520>;
 	};
 
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
@@ -1101,7 +1101,7 @@
 		reg = <0x1520>;
 	};
 
-	hsi_fclk: hsi_fclk {
+	hsi_fclk: hsi_fclk@1638 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&dpll_per_m2x2_ck>;
@@ -1110,7 +1110,7 @@
 		reg = <0x1638>;
 	};
 
-	mmc1_fclk_mux: mmc1_fclk_mux {
+	mmc1_fclk_mux: mmc1_fclk_mux@1628 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
@@ -1118,7 +1118,7 @@
 		reg = <0x1628>;
 	};
 
-	mmc1_fclk: mmc1_fclk {
+	mmc1_fclk: mmc1_fclk@1628 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&mmc1_fclk_mux>;
@@ -1127,7 +1127,7 @@
 		reg = <0x1628>;
 	};
 
-	mmc2_fclk_mux: mmc2_fclk_mux {
+	mmc2_fclk_mux: mmc2_fclk_mux@1630 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
@@ -1135,7 +1135,7 @@
 		reg = <0x1630>;
 	};
 
-	mmc2_fclk: mmc2_fclk {
+	mmc2_fclk: mmc2_fclk@1630 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&mmc2_fclk_mux>;
@@ -1144,7 +1144,7 @@
 		reg = <0x1630>;
 	};
 
-	timer10_gfclk_mux: timer10_gfclk_mux {
+	timer10_gfclk_mux: timer10_gfclk_mux@1028 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
@@ -1152,7 +1152,7 @@
 		reg = <0x1028>;
 	};
 
-	timer11_gfclk_mux: timer11_gfclk_mux {
+	timer11_gfclk_mux: timer11_gfclk_mux@1030 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
@@ -1160,7 +1160,7 @@
 		reg = <0x1030>;
 	};
 
-	timer2_gfclk_mux: timer2_gfclk_mux {
+	timer2_gfclk_mux: timer2_gfclk_mux@1038 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
@@ -1168,7 +1168,7 @@
 		reg = <0x1038>;
 	};
 
-	timer3_gfclk_mux: timer3_gfclk_mux {
+	timer3_gfclk_mux: timer3_gfclk_mux@1040 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
@@ -1176,7 +1176,7 @@
 		reg = <0x1040>;
 	};
 
-	timer4_gfclk_mux: timer4_gfclk_mux {
+	timer4_gfclk_mux: timer4_gfclk_mux@1048 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
@@ -1184,7 +1184,7 @@
 		reg = <0x1048>;
 	};
 
-	timer9_gfclk_mux: timer9_gfclk_mux {
+	timer9_gfclk_mux: timer9_gfclk_mux@1050 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
@@ -1201,7 +1201,7 @@
 };
 
 &scrm_clocks {
-	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1209,7 +1209,7 @@
 		reg = <0x0310>;
 	};
 
-	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1223,7 +1223,7 @@
 		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
 	};
 
-	auxclk0_ck: auxclk0_ck {
+	auxclk0_ck: auxclk0_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk0_src_ck>;
@@ -1232,7 +1232,7 @@
 		reg = <0x0310>;
 	};
 
-	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1240,7 +1240,7 @@
 		reg = <0x0314>;
 	};
 
-	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1254,7 +1254,7 @@
 		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
 	};
 
-	auxclk1_ck: auxclk1_ck {
+	auxclk1_ck: auxclk1_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk1_src_ck>;
@@ -1263,7 +1263,7 @@
 		reg = <0x0314>;
 	};
 
-	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1271,7 +1271,7 @@
 		reg = <0x0318>;
 	};
 
-	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1285,7 +1285,7 @@
 		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
 	};
 
-	auxclk2_ck: auxclk2_ck {
+	auxclk2_ck: auxclk2_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk2_src_ck>;
@@ -1294,7 +1294,7 @@
 		reg = <0x0318>;
 	};
 
-	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1302,7 +1302,7 @@
 		reg = <0x031c>;
 	};
 
-	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1316,7 +1316,7 @@
 		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
 	};
 
-	auxclk3_ck: auxclk3_ck {
+	auxclk3_ck: auxclk3_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk3_src_ck>;
@@ -1325,7 +1325,7 @@
 		reg = <0x031c>;
 	};
 
-	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
 		clocks = <&dpll_core_m3x2_ck>;
@@ -1333,7 +1333,7 @@
 		reg = <0x0320>;
 	};
 
-	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
@@ -1347,7 +1347,7 @@
 		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
 	};
 
-	auxclk4_ck: auxclk4_ck {
+	auxclk4_ck: auxclk4_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&auxclk4_src_ck>;
@@ -1356,7 +1356,7 @@
 		reg = <0x0320>;
 	};
 
-	auxclkreq0_ck: auxclkreq0_ck {
+	auxclkreq0_ck: auxclkreq0_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
@@ -1364,7 +1364,7 @@
 		reg = <0x0210>;
 	};
 
-	auxclkreq1_ck: auxclkreq1_ck {
+	auxclkreq1_ck: auxclkreq1_ck@214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
@@ -1372,7 +1372,7 @@
 		reg = <0x0214>;
 	};
 
-	auxclkreq2_ck: auxclkreq2_ck {
+	auxclkreq2_ck: auxclkreq2_ck@218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
@@ -1380,7 +1380,7 @@
 		reg = <0x0218>;
 	};
 
-	auxclkreq3_ck: auxclkreq3_ck {
+	auxclkreq3_ck: auxclkreq3_ck@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/orion5x-kuroboxpro.dts
new file mode 100644
index 000000000..1a672b098
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-kuroboxpro.dts
@@ -0,0 +1,127 @@
+/*
+ * Device Tree file for Buffalo/Revogear Kurobox Pro
+ *
+ * Copyright (C) 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
+ * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo/Revogear Kurobox Pro";
+	compatible = "buffalo,kurobox-pro", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>,
+				 <MBUS_ID(0x01, 0x1e) 0 0xfc000000 0x1000000>;
+	};
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+};
+
+&devbus_cs0 {
+	status = "okay";
+	compatible = "marvell,orion-nand";
+	reg = <MBUS_ID(0x01, 0x1e) 0 0x400>;
+	cle = <0>;
+	ale = <1>;
+	bank-width = <1>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uImage@0 { /* 4 MB */
+			reg = <0 0x400000>;
+			read-only;
+		};
+
+		rootfs@400000 { /* 64 MB */
+			reg = <0x400000 0x4000000>;
+			read-only;
+		};
+
+		extra@4400000 { /* 188 MB */
+			reg = <0x4400000 0xBC00000>;
+			read-only;
+		};
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&sata {
+	nr-ports = <2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
new file mode 100644
index 000000000..1cf644bfd
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
@@ -0,0 +1,87 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-GL
+ *       (also known as Buffalo Linkstation Pro/Live)
+ *
+ * Copyright (C) 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
+ * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation Pro/Live";
+	compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
new file mode 100644
index 000000000..0eead400f
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
@@ -0,0 +1,151 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WTGL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation LS-WTGL";
+	compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 64 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	gpio_keys {
+		power-on-switch {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		blue-power-led {
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		red-alarm-led {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		amber-info-led {
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+			 &gpio0 17 GPIO_ACTIVE_LOW>;
+
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&sata {
+	nr-ports = <2>;
+};
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
new file mode 100644
index 000000000..ed456ab35
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Device Tree common file for orion5x based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,function = "gpio";
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "jedec-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			header@0 {
+				reg = <0 0x30000>;
+				read-only;
+			};
+
+			uboot@30000 {
+				reg = <0x30000 0xF000>;
+				read-only;
+			};
+
+			uboot_env@3F000 {
+				reg = <0x3F000 0x1000>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+
+	rtc {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&wdt {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts
new file mode 100644
index 000000000..6b47a52ce
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lswsgl.dts
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2015 Benjamin Cama <benoar@dolka.fr>
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Based on the board file arch/arm/mach-orion5x/lsmini-setup.c,
+ * Copyright (C) 2008 Alexey Kopytko <alexey@kopytko.ru>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Buffalo Linkstation Mini (LS-WSGL)";
+	compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "Power-on Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+		autopower {
+			label = "Power-auto Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_alarm &pmx_led_info &pmx_led_func
+			     &pmx_led_power>;
+		pinctrl-names = "default";
+
+		alarm {
+			label = "lswsgl:alarm:red";
+			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		info {
+			label = "lswsgl:info:amber";
+			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lswsgl:func:blue:top";
+			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "lswsgl:power:blue:bottom";
+			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power &pmx_usb_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full256Kb";
+			reg = <0 0x40000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&pinctrl {
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp15", "mpp17", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_power: pmx-usb-power {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 75cd01bd6..e1b6d2a2a 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -212,6 +212,16 @@
 				status = "disabled";
 			};
 
+			cesa: crypto@90000 {
+				compatible = "marvell,orion-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <28>;
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x800>;
+				status = "okay";
+			};
+
 			ehci1: ehci@a0000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0xa0000 0x1000>;
@@ -220,13 +230,11 @@
 			};
 		};
 
-		cesa: crypto@90000 {
-			compatible = "marvell,orion-crypto";
-			reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
-			      <MBUS_ID(0x09, 0x00) 0x0 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <28>;
-			status = "okay";
+		crypto_sram: sa-sram {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
new file mode 100644
index 000000000..ce13705c3
--- /dev/null
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -0,0 +1,336 @@
+/*
+ * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "oxsemi,ox810se";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			clocks = <&armclk>;
+		};
+	};
+
+	memory {
+		/* Max 256MB @ 0x48000000 */
+		reg = <0x48000000 0x10000000>;
+	};
+
+	clocks {
+		osc: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		gmacclk: gmacclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		rpsclk: rpsclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&osc>;
+		};
+
+		pll400: pll400 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <733333333>;
+		};
+
+		sysclk: sysclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll400>;
+		};
+
+		armclk: armclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&pll400>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc>;
+
+		apb-bridge@44000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x44000000 0x1000000>;
+
+			pinctrl: pinctrl {
+				compatible = "oxsemi,ox810se-pinctrl";
+
+				/* Regmap for sys registers */
+				oxsemi,sys-ctrl = <&sys>;
+
+				pinctrl_uart0: uart0 {
+					uart0a {
+						pins = "gpio31";
+						function = "fct3";
+					};
+					uart0b {
+						pins = "gpio32";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart0_modem: uart0_modem {
+					uart0c {
+						pins = "gpio27";
+						function = "fct3";
+					};
+					uart0d {
+						pins = "gpio28";
+						function = "fct3";
+					};
+					uart0e {
+						pins = "gpio29";
+						function = "fct3";
+					};
+					uart0f {
+						pins = "gpio30";
+						function = "fct3";
+					};
+					uart0g {
+						pins = "gpio33";
+						function = "fct3";
+					};
+					uart0h {
+						pins = "gpio34";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart1: uart1 {
+					uart1a {
+						pins = "gpio20";
+						function = "fct3";
+					};
+					uart1b {
+						pins = "gpio22";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart1_modem: uart1_modem {
+					uart1c {
+						pins = "gpio8";
+						function = "fct3";
+					};
+					uart1d {
+						pins = "gpio9";
+						function = "fct3";
+					};
+					uart1e {
+						pins = "gpio23";
+						function = "fct3";
+					};
+					uart1f {
+						pins = "gpio24";
+						function = "fct3";
+					};
+					uart1g {
+						pins = "gpio25";
+						function = "fct3";
+					};
+					uart1h {
+						pins = "gpio26";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart2: uart2 {
+					uart2a {
+						pins = "gpio6";
+						function = "fct3";
+					};
+					uart2b {
+						pins = "gpio7";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart2_modem: uart2_modem {
+					uart2c {
+						pins = "gpio0";
+						function = "fct3";
+					};
+					uart2d {
+						pins = "gpio1";
+						function = "fct3";
+					};
+					uart2e {
+						pins = "gpio2";
+						function = "fct3";
+					};
+					uart2f {
+						pins = "gpio3";
+						function = "fct3";
+					};
+					uart2g {
+						pins = "gpio4";
+						function = "fct3";
+					};
+					uart2h {
+						pins = "gpio5";
+						function = "fct3";
+					};
+				};
+			};
+
+			gpio0: gpio@000000 {
+				compatible = "oxsemi,ox810se-gpio";
+				reg = <0x000000 0x100000>;
+				interrupts = <21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <32>;
+				oxsemi,gpio-bank = <0>;
+				gpio-ranges = <&pinctrl 0 0 32>;
+			};
+
+			gpio1: gpio@100000 {
+				compatible = "oxsemi,ox810se-gpio";
+				reg = <0x100000 0x100000>;
+				interrupts = <22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <3>;
+				oxsemi,gpio-bank = <1>;
+				gpio-ranges = <&pinctrl 0 32 3>;
+			};
+
+			uart0: serial@200000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <23>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset 17>;
+			};
+
+			uart1: serial@300000 {
+			       compatible = "ns16550a";
+			       reg = <0x300000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <24>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset 18>;
+			};
+
+			uart2: serial@900000 {
+			       compatible = "ns16550a";
+			       reg = <0x900000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <29>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset 22>;
+			};
+
+			uart3: serial@a00000 {
+			       compatible = "ns16550a";
+			       reg = <0xa00000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <30>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset 23>;
+			};
+		};
+
+		apb-bridge@45000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x45000000 0x1000000>;
+
+			sys: sys-ctrl@000000 {
+				compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
+				reg = <0x000000 0x100000>;
+
+				reset: reset-controller {
+					compatible = "oxsemi,ox810se-reset";
+					#reset-cells = <1>;
+				};
+
+				stdclk: stdclk {
+					compatible = "oxsemi,ox810se-stdclk";
+					#clock-cells = <1>;
+				};
+			};
+
+			rps@300000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "simple-bus";
+				ranges = <0 0x300000 0x100000>;
+
+				intc: interrupt-controller@0 {
+					compatible = "oxsemi,ox810se-rps-irq";
+					interrupt-controller;
+					reg = <0 0x200>;
+					#interrupt-cells = <1>;
+					valid-mask = <0xFFFFFFFF>;
+					clear-mask = <0>;
+				};
+
+				timer0: timer@200 {
+					compatible = "oxsemi,ox810se-rps-timer";
+					reg = <0x200 0x40>;
+					clocks = <&rpsclk>;
+					interrupts = <4 5>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
deleted file mode 100644
index 90fdbd77f..000000000
--- a/arch/arm/boot/dts/phy3250.dts
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * PHYTEC phyCORE-LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "lpc32xx.dtsi"
-
-/ {
-	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
-	compatible = "phytec,phy3250", "nxp,lpc3250";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x4000000>;
-	};
-
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		/* Here, choose exactly one from: ohci, usbd */
-		ohci@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-
-/*
-		usbd@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-*/
-
-		clcd@31040000 {
-			status = "okay";
-		};
-
-		/* 64MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <40000000>;
-			nxp,whold = <100000000>;
-			nxp,wsetup = <100000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <40000000>;
-			nxp,rhold = <66666666>;
-			nxp,rsetup = <100000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "phy3250-boot";
-				reg = <0x00000000 0x00064000>;
-				read-only;
-			};
-
-			mtd1@00064000 {
-				label = "phy3250-uboot";
-				reg = <0x00064000 0x00190000>;
-				read-only;
-			};
-
-			mtd2@001f4000 {
-				label = "phy3250-ubt-prms";
-				reg = <0x001f4000 0x00010000>;
-			};
-
-			mtd3@00204000 {
-				label = "phy3250-kernel";
-				reg = <0x00204000 0x00400000>;
-			};
-
-			mtd4@00604000 {
-				label = "phy3250-rootfs";
-				reg = <0x00604000 0x039fc000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				pcf8563: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			i2cusb: i2c@31020300 {
-				clock-frequency = <100000>;
-
-				isp1301: usb-transceiver@2c {
-					compatible = "nxp,isp1301";
-					reg = <0x2c>;
-				};
-			};
-
-			ssp0: ssp@20084000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				num-cs = <1>;
-				cs-gpios = <&gpio 3 5 0>;
-
-				eeprom: at25@0 {
-					pl022,interface = <0>;
-					pl022,com-mode = <0>;
-					pl022,rx-level-trig = <1>;
-					pl022,tx-level-trig = <1>;
-					pl022,ctrl-len = <11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-
-					at25,byte-len = <0x8000>;
-					at25,addr-mode = <2>;
-					at25,page-size = <64>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <5000000>;
-				};
-			};
-
-			sd@20098000 {
-				wp-gpios = <&gpio 3 0 0>;
-				cd-gpios = <&gpio 3 1 0>;
-				cd-inverted;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart2: serial@40018000 {
-				status = "okay";
-			};
-
-			tsc@40048000 {
-				status = "okay";
-			};
-
-			key@40050000 {
-				status = "okay";
-				keypad,num-rows = <1>;
-				keypad,num-columns = <1>;
-				nxp,debounce-delay-ms = <3>;
-				nxp,scan-delay-ms = <34>;
-				linux,keymap = <0x00000002>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 { /* red */
-			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
-			default-state = "off";
-		};
-
-		led1 { /* green */
-			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
index 66afcff67..0abd7bf17 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 		      clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 90b99714a..9e73dc6b3 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -7,16 +7,41 @@
 	compatible = "marvell,pxa27x";
 
 	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-channels = <32>;
+			#dma-cells = <2>;
+			#dma-requests = <75>;
+			status = "okay";
+		};
+
 		pxairq: interrupt-controller@40d00000 {
 			marvell,intc-priority;
 			marvell,intc-nr-irqs = <34>;
 		};
 
+		pinctrl: pinctrl@40e00000 {
+			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+			       0x40f00020 0x10>;
+			compatible = "marvell,pxa27x-pinctrl";
+		};
+
 		gpio: gpio@40e00000 {
 			compatible = "intel,pxa27x-gpio";
+			gpio-ranges = <&pinctrl 0 0 128>;
 			clocks = <&clks CLK_NONE>;
 		};
 
+		pxa27x_ohci: usb@4c000000 {
+			compatible = "marvell,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			clocks = <&clks CLK_USBHOST>;
+			status = "disabled";
+		};
+
 		pwm0: pwm@40b00000 {
 			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
 			reg = <0x40b00000 0x10>;
@@ -50,6 +75,8 @@
 			reg = <0x40f00180 0x24>;
 			interrupts = <6>;
 			clocks = <&clks CLK_PWRI2C>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -68,6 +95,23 @@
 			clocks = <&clks CLK_KEYPAD>;
 			status = "disabled";
 		};
+
+		pxa_camera: imaging@50000000 {
+			compatible = "marvell,pxa270-qci";
+			reg = <0x50000000 0x1000>;
+			interrupts = <33>;
+			dmas = <&pdma 68 0	/* Y channel */
+				&pdma 69 0	/* U channel */
+				&pdma 70 0>;	/* V channel */
+			dma-names = "CI_Y", "CI_U", "CI_V";
+
+			clocks = <&clks CLK_CAMERA>;
+			clock-names = "ciclk";
+			clock-frequency = <5000000>;
+			clock-output-names = "qci_mclk";
+
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 71a0cd738..3ff077ca4 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -128,6 +128,10 @@
 			compatible = "marvell,pxa-mmc";
 			reg = <0x41100000 0x1000>;
 			interrupts = <23>;
+			clocks = <&clks CLK_MMC>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -136,5 +140,13 @@
 			reg = <0x40900000 0x3c>;
 			interrupts = <30 31>;
 		};
+
+		lcd-controller@40500000 {
+			compatible = "marvell,pxa2xx-lcdc";
+			reg = <0x44000000 0x10000>;
+			interrupts = <17>;
+			clocks = <&clks CLK_LCD>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 7ad0b1771..9d6f3aace 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -1,11 +1,111 @@
 /* The pxa3xx skeleton simply augments the 2xx version */
 #include "pxa2xx.dtsi"
 
+#define MFP_PIN_PXA300(gpio)				\
+	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
+	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
+	 (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 0)
+
+#define MFP_PIN_PXA310(gpio)				\
+	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
+	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
+	 (gpio <= 29) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 98) ? (0x0418 + 4 * (gpio - 30)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 (gpio <= 262) ? 0 :				\
+	 (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) :	\
+	 0)
+
+#define MFP_PIN_PXA320(gpio)				\
+	((gpio <= 4) ? (0x0124 + 4 * gpio) :		\
+	 (gpio <= 9) ? (0x028c + 4 * (gpio - 5)) :	\
+	 (gpio <= 10) ? (0x0458 + 4 * (gpio - 10)) :	\
+	 (gpio <= 26) ? (0x02a0 + 4 * (gpio - 11)) :	\
+	 (gpio <= 48) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 62) ? (0x045c + 4 * (gpio - 49)) :	\
+	 (gpio <= 73) ? (0x04b4 + 4 * (gpio - 63)) :	\
+	 (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 0)
+
+/*
+ * MFP Alternate functions for pins having a gpio.
+ * Example of use: pinctrl-single,pins = < MFP_PIN_PXA310(21) MFP_AF1 >
+ */
+#define MFP_AF0		(0 << 0)
+#define MFP_AF1		(1 << 0)
+#define MFP_AF2		(2 << 0)
+#define MFP_AF3		(3 << 0)
+#define MFP_AF4		(4 << 0)
+#define MFP_AF5		(5 << 0)
+#define MFP_AF6		(6 << 0)
+
+/*
+ * MFP drive strength functions for pins.
+ * Example of use: pinctrl-single,drive-strength = MFP_DS03X;
+ */
+#define MFP_DSMSK	(0x7 << 10)
+#define MFP_DS01X	< (0x0 << 10) MFP_DSMSK >
+#define MFP_DS02X	< (0x1 << 10) MFP_DSMSK >
+#define MFP_DS03X	< (0x2 << 10) MFP_DSMSK >
+#define MFP_DS04X	< (0x3 << 10) MFP_DSMSK >
+#define MFP_DS06X	< (0x4 << 10) MFP_DSMSK >
+#define MFP_DS08X	< (0x5 << 10) MFP_DSMSK >
+#define MFP_DS10X	< (0x6 << 10) MFP_DSMSK >
+#define MFP_DS13X	< (0x7 << 10) MFP_DSMSK >
+
+/*
+ * MFP low power mode for pins.
+ * Example of use:
+ *   pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL);
+ *
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFP_LPM(x)		< (x) MFP_LPM_MSK >
+
+#define MFP_LPM_MSK		0xe1f0
+#define MFP_LPM_INPUT		0x0000
+#define MFP_LPM_DRIVE_LOW	0x2000
+#define MFP_LPM_DRIVE_HIGH	0x4100
+#define MFP_LPM_PULL_LOW	0x2080
+#define MFP_LPM_PULL_HIGH	0x4180
+#define MFP_LPM_FLOAT		0x0080
+
+#define MFP_LPM_EDGE_NONE	0x0000
+#define MFP_LPM_EDGE_RISE	0x0010
+#define MFP_LPM_EDGE_FALL	0x0020
+#define MFP_LPM_EDGE_BOTH	0x0030
+
 / {
 	model = "Marvell PXA3xx familiy SoC";
 	compatible = "marvell,pxa3xx";
 
 	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-channels = <32>;
+			#dma-cells = <2>;
+			#dma-requests = <100>;
+			status = "okay";
+		};
+
 		pwri2c: i2c@40f500c0 {
 			compatible = "mrvl,pwri2c";
 			reg = <0x40f500c0 0x30>;
@@ -21,6 +121,8 @@
 			reg = <0x43100000 90>;
 			interrupts = <45>;
 			clocks = <&clks CLK_NAND>;
+			dmas = <&pdma 97 3>;
+			dma-names = "data";
 			#address-cells = <1>;
 			#size-cells = <1>;	
 			status = "disabled";
@@ -31,6 +133,15 @@
 			marvell,intc-nr-irqs = <56>;
 		};
 
+		pinctrl: pinctrl@40e10000 {
+			compatible = "pinconf-single";
+			reg = <0x40e10000 0xffff>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x7>;
+		};
+
 		gpio: gpio@40e00000 {
 			compatible = "intel,pxa3xx-gpio";
 			reg = <0x40e00000 0x10000>;
@@ -42,6 +153,79 @@
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 		};
+
+		mmc0: mmc@41100000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			clocks = <&clks CLK_MMC>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc1: mmc@42000000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42000000 0x1000>;
+			interrupts = <41>;
+			clocks = <&clks CLK_MMC1>;
+			dmas = <&pdma 93 3
+				&pdma 94 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc2: mmc@42500000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42500000 0x1000>;
+			interrupts = <55>;
+			clocks = <&clks CLK_MMC2>;
+			dmas = <&pdma 46 3
+				&pdma 47 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		pxa3xx_ohci: usb@4c000000 {
+			compatible = "marvell,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			clocks = <&clks CLK_USBH>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@40c00000 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40c00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@40c00010 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40c00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
new file mode 100644
index 000000000..0abc93e5b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -0,0 +1,626 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8660.dtsi"
+
+/ {
+	model = "Qualcomm APQ8060 Dragonboard";
+	compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
+
+	aliases {
+		serial0 = &gsbi12_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		/* Main power of the board: 3.7V */
+		vph: regulator-fixed {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3700000>;
+			regulator-max-microvolt = <3700000>;
+			regulator-name = "VPH";
+			regulator-type = "voltage";
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		/* This is a levelshifter for SDCC5 */
+		dragon_vio_txb: txb0104rgyr {
+			compatible = "regulator-fixed";
+			regulator-name = "Dragon SDCC levelshifter";
+			vin-supply = <&pm8058_l14>;
+			regulator-always-on;
+		};
+	};
+
+	soc {
+		pinctrl@800000 {
+			/* eMMMC pins, all 8 data lines connected */
+			dragon_sdcc1_pins: sdcc1 {
+				mux {
+					pins = "gpio159", "gpio160", "gpio161",
+					     "gpio162", "gpio163", "gpio164",
+					     "gpio165", "gpio166", "gpio167",
+					     "gpio168";
+					     function = "sdc1";
+				};
+				clk {
+					pins = "gpio167"; /* SDC5 CLK */
+					drive-strength = <16>;
+					bias-disable;
+				};
+				cmd {
+					pins = "gpio168"; /* SDC5 CMD */
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+				data {
+					/* SDC5 D0 to D7 */
+					pins = "gpio159", "gpio160", "gpio161", "gpio162",
+					     "gpio163", "gpio164", "gpio165", "gpio166";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			/*
+			 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
+			 * configuration.
+			 */
+			dragon_sdcc3_pins: sdcc3 {
+				clk {
+					pins = "sdc3_clk";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				cmd {
+					pins = "sdc3_cmd";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				data {
+					pins = "sdc3_data";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			/* Second SD card slot pins */
+			dragon_sdcc5_pins: sdcc5 {
+				mux {
+					pins = "gpio95", "gpio96", "gpio97",
+					    "gpio98", "gpio99", "gpio100";
+					function = "sdc5";
+				};
+				clk {
+					pins = "gpio97"; /* SDC5 CLK */
+					drive-strength = <16>;
+					bias-disable;
+				};
+				cmd {
+					pins = "gpio95"; /* SDC5 CMD */
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+				data {
+					/* SDC5 D0 to D3 */
+					pins = "gpio96", "gpio98", "gpio99", "gpio100";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			dragon_gsbi12_i2c_pins: gsbi12_i2c {
+				mux {
+					pins = "gpio115", "gpio116";
+					function = "gsbi12";
+				};
+				pinconf {
+					pins = "gpio115", "gpio116";
+					drive-strength = <16>;
+					/* These have external pull-up 4.7kOhm to 1.8V */
+					bias-disable;
+				};
+			};
+
+			/* Primary serial port uart 0 pins */
+			dragon_gsbi12_serial_pins: gsbi12_serial {
+				mux {
+					pins = "gpio117", "gpio118";
+					function = "gsbi12";
+				};
+				tx {
+					pins = "gpio117";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				rx {
+					pins = "gpio118";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				keypad@148 {
+					linux,keymap = <
+					MATRIX_KEY(0, 0, KEY_MENU)
+					MATRIX_KEY(0, 2, KEY_1)
+					MATRIX_KEY(0, 3, KEY_4)
+					MATRIX_KEY(0, 4, KEY_7)
+					MATRIX_KEY(1, 0, KEY_UP)
+					MATRIX_KEY(1, 1, KEY_LEFT)
+					MATRIX_KEY(1, 2, KEY_DOWN)
+					MATRIX_KEY(1, 3, KEY_5)
+					MATRIX_KEY(1, 3, KEY_8)
+					MATRIX_KEY(2, 0, KEY_HOME)
+					MATRIX_KEY(2, 1, KEY_REPLY)
+					MATRIX_KEY(2, 2, KEY_2)
+					MATRIX_KEY(2, 3, KEY_6)
+					MATRIX_KEY(3, 0, KEY_VOLUMEUP)
+					MATRIX_KEY(3, 1, KEY_RIGHT)
+					MATRIX_KEY(3, 2, KEY_3)
+					MATRIX_KEY(3, 3, KEY_9)
+					MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
+					MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
+					MATRIX_KEY(4, 1, KEY_BACK)
+					MATRIX_KEY(4, 2, KEY_CAMERA)
+					MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
+					>;
+					keypad,num-rows = <6>;
+					keypad,num-columns = <5>;
+				};
+
+				gpio@150 {
+					dragon_bmp085_gpios: bmp085-gpios {
+						pinconf {
+							pins = "gpio16";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_sdcc3_gpios: sdcc3-gpios {
+						pinconf {
+							pins = "gpio22";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_sdcc5_gpios: sdcc5-gpios {
+						pinconf {
+							pins = "gpio26";
+							function = "normal";
+							input-enable;
+							bias-pull-up;
+							qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_ak8975_gpios: ak8975-gpios {
+						pinconf {
+							pins = "gpio33";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+				};
+			};
+		};
+
+		gsbi@19c00000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@19c40000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_gsbi12_serial_pins>;
+			};
+
+			i2c@19c80000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
+
+				ak8975@0c {
+					compatible = "asahi-kasei,ak8975";
+					reg = <0x0c>;
+					/* GPIO33 has interrupt 224 on the PM8058 */
+					interrupt-parent = <&pm8058_gpio>;
+					interrupts = <224 IRQ_TYPE_EDGE_RISING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&dragon_ak8975_gpios>;
+					vid-supply = <&pm8058_lvs0>; // 1.8V
+					vdd-supply = <&pm8058_l14>; // 2.85V
+				};
+				bmp085@77 {
+					compatible = "bosch,bmp085";
+					reg = <0x77>;
+					/* GPIO16 has interrupt 207 on the PM8058 */
+					interrupt-parent = <&pm8058_gpio>;
+					interrupts = <207 IRQ_TYPE_EDGE_RISING>;
+					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&dragon_bmp085_gpios>;
+					vddd-supply = <&pm8058_lvs0>; // 1.8V
+					vdda-supply = <&pm8058_l14>; // 2.85V
+				};
+			};
+		};
+
+		rpm@104000 {
+			/*
+			 * Set up of the PMIC RPM regulators for this board
+			 * PM8901 supplies "preliminary regulators" whatever
+			 * that means
+			 */
+			pm8901-regulators {
+				vdd_l0-supply = <&pm8901_s4>;
+				vdd_l1-supply = <&vph>;
+				vdd_l2-supply = <&vph>;
+				vdd_l3-supply = <&vph>;
+				vdd_l4-supply = <&vph>;
+				vdd_l5-supply = <&vph>;
+				vdd_l6-supply = <&vph>;
+				/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
+				vdd_s2-supply = <&vph>;
+				vdd_s3-supply = <&vph>;
+				vdd_s4-supply = <&vph>;
+				lvs0_in-supply = <&pm8058_s3>;
+				lvs1_in-supply = <&pm8901_s4>;
+				lvs2_in-supply = <&pm8058_l0>;
+				lvs3_in-supply = <&pm8058_s2>;
+				mvs_in-supply = <&pm8058_s3>;
+
+				l0 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l1 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+				l2 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+				l3 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+				l4 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l6 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					bias-pull-down;
+				};
+
+				/* s0 and s1 are SAW regulators controlled over SPM */
+				s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s3 {
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s4 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* LVS0 thru 3 and mvs0 are just switches */
+				lvs0 {
+					regulator-always-on;
+				};
+				lvs1 { };
+				lvs2 { };
+				lvs3 { };
+				mvs0 {};
+
+			};
+
+			pm8058-regulators {
+				vdd_l0_l1_lvs-supply = <&pm8058_s3>;
+				vdd_l2_l11_l12-supply = <&vph>;
+				vdd_l3_l4_l5-supply = <&vph>;
+				vdd_l6_l7-supply = <&vph>;
+				vdd_l8-supply = <&vph>;
+				vdd_l9-supply = <&vph>;
+				vdd_l10-supply = <&vph>;
+				vdd_l13_l16-supply = <&pm8058_s4>;
+				vdd_l14_l15-supply = <&vph>;
+				vdd_l17_l18-supply = <&vph>;
+				vdd_l19_l20-supply = <&vph>;
+				vdd_l21-supply = <&pm8058_s3>;
+				vdd_l22-supply = <&pm8058_s3>;
+				vdd_l23_l24_l25-supply = <&pm8058_s3>;
+				vdd_s0-supply = <&vph>;
+				vdd_s1-supply = <&vph>;
+				vdd_s2-supply = <&vph>;
+				vdd_s3-supply = <&vph>;
+				vdd_s4-supply = <&vph>;
+				vdd_ncp-supply = <&vph>;
+
+				l0 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l1 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l2 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l3 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l4 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l6 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3600000>;
+					bias-pull-down;
+				};
+				l7 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l8 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <3050000>;
+					bias-pull-down;
+				};
+				l9 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l10 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l11 {
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					bias-pull-down;
+				};
+				l12 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					bias-pull-down;
+				};
+				l13 {
+					regulator-min-microvolt = <2050000>;
+					regulator-max-microvolt = <2050000>;
+					bias-pull-down;
+				};
+				l14 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+				l15 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l16 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+					regulator-always-on;
+				};
+				l17 {
+					// 1.5V according to schematic
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l18 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					bias-pull-down;
+				};
+				l19 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					bias-pull-down;
+				};
+				l20 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l21 {
+					// 1.1 V according to schematic
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+					regulator-always-on;
+				};
+				l22 {
+					// 1.2 V according to schematic
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+				l23 {
+					// Unused
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l24 {
+					// Unused
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l25 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				s0 {
+					// regulator-min-microvolt = <500000>;
+					// regulator-max-microvolt = <1325000>;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s1 {
+					// regulator-min-microvolt = <500000>;
+					// regulator-max-microvolt = <1250000>;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s2 {
+					// 1.3 V according to schematic
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1400000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s3 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+				s4 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+
+				/* LVS0 and LVS1 are just switches */
+				lvs0 {
+					bias-pull-down;
+				};
+				lvs1 {
+					bias-pull-down;
+				};
+
+				ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+		amba {
+			/* Internal 3.69 GiB eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_sdcc1_pins>;
+				vmmc-supply = <&pm8901_l5>;
+				vqmmc-supply = <&pm8901_lvs0>;
+			};
+
+			/* External micro SD card, directly connected, pulled up to 2.85 V */
+			sdcc@12180000 {
+				status = "okay";
+				/* Enable SSBI GPIO 22 as input, use for card detect */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
+				cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
+				wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+				vmmc-supply = <&pm8058_l14>;
+			};
+
+			/*
+			 * Second external micro SD card, using two TXB104RGYR levelshifters
+			 * to lift from 1.8 V to 2.85 V
+			 */
+			sdcc@12200000 {
+				status = "okay";
+				/* Enable SSBI GPIO 26 as input, use for card detect */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
+				cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
+				wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
+				vmmc-supply = <&pm8058_l14>;
+				vqmmc-supply = <&dragon_vio_txb>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi
new file mode 100644
index 000000000..a3efb9704
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi
@@ -0,0 +1,52 @@
+&tlmm_pinmux {
+	card_detect: card-detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie-pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
+		};
+	};
+
+	user_leds: user-leds {
+		mux {
+			pins = "gpio3", "gpio7", "gpio10", "gpio11";
+			function = "gpio";
+		};
+
+		conf {
+			pins = "gpio3", "gpio7", "gpio10", "gpio11";
+			function = "gpio";
+			output-low;
+		};
+	};
+
+	magneto_pins: magneto-pins {
+		mux {
+			pins = "gpio31", "gpio48";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+};
+
+&pm8921_mpps {
+	mpp_leds: mpp-leds {
+		pinconf {
+			pins = "mpp7", "mpp8";
+			function = "digital";
+			output-low;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
new file mode 100644
index 000000000..39ae2bc8c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
@@ -0,0 +1,351 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+
+/ {
+	model = "Arrow Electronics, APQ8064 SD_600eval";
+	compatible = "arrow,sd_600eval", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi1_serial;
+		i2c0 = &gsbi2_i2c;
+		i2c1 = &gsbi3_i2c;
+		i2c2 = &gsbi4_i2c;
+		i2c3 = &gsbi7_i2c;
+		spi0 = &gsbi5_spi;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		vph: regulator-fixed@1 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <4500000>;
+			regulator-name = "VPH";
+			regulator-type = "voltage";
+			regulator-boot-on;
+		};
+
+		/* on board fixed 3.3v supply */
+		vcc3v3: vcc3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "VCC3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+	};
+
+	soc {
+		rpm@108000 {
+			regulators {
+				vdd_s1-supply = <&vph>;
+				vdd_s2-supply = <&vph>;
+				vdd_s3-supply = <&vph>;
+				vdd_s4-supply = <&vph>;
+				vdd_s5-supply = <&vph>;
+				vdd_s6-supply = <&vph>;
+				vdd_s7-supply = <&vph>;
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l3_l15_l17-supply = <&vph>;
+				vdd_l4_l14-supply = <&vph>;
+				vdd_l5_l8_l16-supply = <&vph>;
+				vdd_l6_l7-supply = <&vph>;
+				vdd_l9_l11-supply = <&vph>;
+				vdd_l10_l22-supply = <&vph>;
+				vdd_l21_l23_l29-supply = <&vph>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s1>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				s3 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1400000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+					bias-pull-down;
+					regulator-always-on;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				 };
+
+				l3 {
+					regulator-min-microvolt = <3050000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				l4 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l23 {
+					regulator-min-microvolt = <1700000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+
+				lvs7 {
+					bias-pull-down;
+				};
+			};
+		};
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_UART_W_FC>;
+			serial@12450000 {
+				label = "LS-UART1";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi1_uart_4pins>;
+			};
+		};
+
+		gsbi@12480000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@124a0000 {
+				/* On Low speed expansion and Sensors */
+				label = "LS-I2C0";
+				status = "okay";
+				lis3mdl_mag@1e {
+					compatible = "st,lis3mdl-magn";
+					reg = <0x1e>;
+					vdd-supply = <&vcc3v3>;
+					vddio-supply = <&pm8921_s4>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&magneto_pins>;
+					interrupt-parent = <&tlmm_pinmux>;
+
+					st,drdy-int-pin = <2>;
+					interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+						     <31 IRQ_TYPE_EDGE_RISING>; /* INT */
+				};
+			};
+		};
+
+		gsbi@16200000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@16280000 {
+			/* On Low speed expansion */
+				status = "okay";
+				label = "LS-I2C1";
+				clock-frequency = <200000>;
+				eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <64>;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@16380000 {
+				/* On High speed expansion */
+				label = "HS-CAM-I2C3";
+				status = "okay";
+			};
+		};
+
+		gsbi@1a200000 {
+			status = "okay";
+			spi@1a280000 {
+				/* On Low speed expansion */
+				label = "LS-SPI0";
+				status = "okay";
+			};
+		};
+
+		/* DEBUG UART  */
+		gsbi@16600000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				label = "LS-UART0";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi7_uart_2pins>;
+			};
+
+			i2c@16680000 {
+				/* On High speed expansion */
+				status = "okay";
+				label = "HS-CAM-I2C2";
+			};
+		};
+
+		leds {
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_leds>, <&mpp_leds>;
+
+			compatible = "gpio-leds";
+
+			user-led0 {
+				label = "user0-led";
+				gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "heartbeat";
+				default-state = "off";
+			};
+
+			user-led1 {
+				label = "user1-led";
+				gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+
+			user-led2 {
+				label = "user2-led";
+				gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "mmc1";
+				default-state = "off";
+			};
+
+			user-led3 {
+				label = "user3-led";
+				gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "none";
+				default-state = "off";
+			};
+
+			wifi-led {
+				label = "WiFi-led";
+				gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			bt-led {
+				label = "BT-led";
+				gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		pci@1b500000 {
+			status = "okay";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&vcc3v3>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
+		phy@1b400000 {
+			status = "okay";
+		};
+
+		sata@29000000 {
+			status	= "okay";
+			target-supply	= <&pm8921_lvs7>;
+		};
+
+		/* OTG */
+		phy@12500000 {
+			status		= "okay";
+			dr_mode		= "peripheral";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		phy@12520000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l23>;
+		};
+
+		phy@12530000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l23>;
+		};
+
+		gadget@12500000 {
+			status = "okay";
+		};
+
+		/* OTG */
+		usb@12500000 {
+			status = "okay";
+		};
+
+		usb@12520000 {
+			status = "okay";
+		};
+
+		usb@12530000 {
+			status = "okay";
+		};
+
+		amba {
+			/* eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+
+			/* External micro SD card */
+			sdcc@12180000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l6>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&card_detect>;
+				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
new file mode 100644
index 000000000..7b05f072b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -0,0 +1,276 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+/ {
+	model = "Asus Nexus7(flo)";
+	compatible = "asus,nexus7-flo", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_3p3v: regulator-fixed@1 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		volume_up {
+			label = "Volume Up";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+		volume_down {
+			label = "Volume Down";
+			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	soc {
+		rpm@108000 {
+			regulators {
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vin_lvs2-supply = <&pm8921_s1>;
+
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				vdd_ncp-supply = <&pm8921_l6>;
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				/* msm otg HSUSB_VDDCX */
+				s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				/*
+				 * msm_sdcc.1-sdc-vdd_io
+				 * tabla2x-slim-CDC_VDDA_RX
+				 * tabla2x-slim-CDC_VDDA_TX
+				 * tabla2x-slim-CDC_VDD_CP
+				 * tabla2x-slim-VDDIO_CDC
+				 */
+				s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <3200000>;
+					regulator-always-on;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				/* mipi_dsi.1-dsi1_pll_vdda */
+				l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				/* msm_otg-HSUSB_3p3 */
+				l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				/* msm_otg-HSUSB_1p8 */
+				l4 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				/* msm_sdcc.1-sdc_vdd */
+				l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				/* mipi_dsi.1-dsi1_avdd */
+				l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				/* pwm_power for backlight */
+				l17 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3600000>;
+					bias-pull-down;
+				};
+
+				/* camera, qdsp6 */
+				l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				/*
+				 * tabla2x-slim-CDC_VDDA_A_1P2V
+				 * tabla2x-slim-VDDD_CDC_D
+				 */
+				l25 {
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs4 {
+					bias-pull-down;
+				};
+
+				lvs5 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+				/*
+				 * mipi_dsi.1-dsi1_vddio
+				 * pil_riva-pll_vdd
+				 */
+				lvs7 {
+					bias-pull-down;
+				};
+			};
+		};
+
+		gsbi@16200000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@16280000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c3_pins>;
+				pinctrl-names = "default";
+
+				trackpad@10 {
+					compatible = "elan,ekth3500";
+					reg = <0x10>;
+					interrupt-parent = <&tlmm_pinmux>;
+					interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+				};
+			};
+		};
+
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+
+				bq27541@55 {
+					compatible = "ti,bq27541";
+					reg = <0x55>;
+				};
+
+			};
+		};
+
+		gsbi@16500000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@16540000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi6_uart_4pins>;
+			};
+		};
+
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+
+		/* OTG */
+		phy@12500000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		gadget@12500000 {
+			status = "okay";
+		};
+
+		/* OTG */
+		usb@12500000 {
+			status = "okay";
+		};
+
+		amba {
+			/* eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 71512b3ca..35f1d46ed 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -1,15 +1,52 @@
 #include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "CompuLab CM-QS600";
 	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
 
+	aliases {
+		serial0 = &gsbi7_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pwrseq {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		sdcc4_pwrseq: sdcc4_pwrseq {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_default_gpios>;
+			compatible = "mmc-pwrseq-simple";
+			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	soc {
 		pinctrl@800000 {
-			i2c1_pins: i2c1 {
+			card_detect: card_detect {
 				mux {
-					pins = "gpio20", "gpio21";
-					function = "gsbi1";
+					pins = "gpio26";
+					function = "gpio";
+					bias-disable;
+				};
+			};
+
+			pcie_pins: pcie_pinmux {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+				};
+				conf {
+					pins = "gpio27";
+					drive-strength = <12>;
+					bias-disable;
 				};
 			};
 		};
@@ -29,7 +66,7 @@
 
 
 				/* Buck SMPS */
-				pm8921_s1: s1 {
+				s1 {
 					regulator-always-on;
 					regulator-min-microvolt = <1225000>;
 					regulator-max-microvolt = <1225000>;
@@ -37,41 +74,52 @@
 					bias-pull-down;
 				};
 
-				pm8921_s3: s3 {
+				s3 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1400000>;
 					qcom,switch-mode-frequency = <4800000>;
 				};
 
-				pm8921_s4: s4 {
+				s4 {
 					regulator-min-microvolt	= <1800000>;
 					regulator-max-microvolt	= <1800000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_s7: s7 {
+				s7 {
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_l3: l3 {
+				l3 {
 					regulator-min-microvolt = <3050000>;
 					regulator-max-microvolt = <3300000>;
 					bias-pull-down;
 				};
 
-				pm8921_l4: l4 {
+				l4 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1800000>;
 					bias-pull-down;
 				};
 
-				pm8921_l23: l23 {
+				l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l23 {
 					regulator-min-microvolt = <1700000>;
 					regulator-max-microvolt = <1900000>;
 					bias-pull-down;
 				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
 			};
 		};
 
@@ -82,10 +130,8 @@
 			i2c@12460000 {
 				status = "okay";
 				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
 
-				eeprom: eeprom@50 {
+				eeprom@50 {
 					compatible = "24c02";
 					reg = <0x50>;
 					pagesize = <32>;
@@ -98,6 +144,8 @@
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 			serial@16640000 {
 				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi7_uart_2pins>;
 			};
 		};
 
@@ -140,19 +188,62 @@
 			status = "okay";
 		};
 
+		/* on board fixed 3.3v supply */
+		v3p3_fixed: v3p3 {
+			compatible = "regulator-fixed";
+			regulator-name = "PCIE V3P3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					wlan_default_gpios: wlan-gpios {
+						pios {
+							pins = "gpio43";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+				};
+			};
+		};
+
+		pci@1b500000 {
+			status = "ok";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&v3p3_fixed>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
 			sdcc3: sdcc@12180000 {
 				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&card_detect>;
+				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
 			sdcc4: sdcc@121c0000 {
 				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
+				vqmmc-supply = <&v3p3_fixed>;
+				mmc-pwrseq = <&sdcc4_pwrseq>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index a7c939ba8..2eeb0904e 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -1,5 +1,6 @@
 #include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "Qualcomm APQ8064/IFC6410";
@@ -7,6 +8,39 @@
 
 	aliases {
 		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+		i2c0 = &gsbi1_i2c;
+		i2c1 = &gsbi2_i2c;
+		i2c2 = &gsbi3_i2c;
+		i2c3 = &gsbi4_i2c;
+		spi0 = &gsbi5_spi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pwrseq {
+		compatible = "simple-bus";
+
+		sdcc4_pwrseq: sdcc4_pwrseq {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_default_gpios>;
+			compatible = "mmc-pwrseq-simple";
+			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&notify_led>;
+
+		led@1 {
+			label = "apq8064:green:user1";
+			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
 	};
 
 	soc {
@@ -18,6 +52,18 @@
 					bias-disable;
 				};
 			};
+
+			pcie_pins: pcie_pinmux {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+				};
+				conf {
+					pins = "gpio27";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
 		};
 
 		rpm@108000 {
@@ -35,7 +81,7 @@
 
 
 				/* Buck SMPS */
-				pm8921_s1: s1 {
+				s1 {
 					regulator-always-on;
 					regulator-min-microvolt = <1225000>;
 					regulator-max-microvolt = <1225000>;
@@ -43,57 +89,90 @@
 					bias-pull-down;
 				};
 
-				pm8921_s3: s3 {
+				s3 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1400000>;
 					qcom,switch-mode-frequency = <4800000>;
 				};
 
-				pm8921_s4: s4 {
+				s4 {
 					regulator-min-microvolt	= <1800000>;
 					regulator-max-microvolt	= <1800000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_s7: s7 {
+				s7 {
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_l3: l3 {
+				l3 {
 					regulator-min-microvolt = <3050000>;
 					regulator-max-microvolt = <3300000>;
 					bias-pull-down;
 				};
 
-				pm8921_l4: l4 {
+				l4 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1800000>;
 					bias-pull-down;
 				};
 
-				pm8921_l6: l6 {
+				l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l6 {
 					regulator-min-microvolt = <2950000>;
 					regulator-max-microvolt = <2950000>;
 					bias-pull-down;
 				};
 
-				pm8921_l23: l23 {
+				l23 {
 					regulator-min-microvolt = <1700000>;
 					regulator-max-microvolt = <1900000>;
 					bias-pull-down;
 				};
+
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
 			};
 		};
 
+		ext_3p3v: regulator-fixed@1 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "ext_3p3v";
+			regulator-type = "voltage";
+			startup-delay-us = <0>;
+			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
 		gsbi3: gsbi@16200000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
-			i2c3: i2c@16280000 {
+			i2c@16280000 {
+				status = "okay";
+			};
+		};
+
+		gsbi@16300000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			/* CAM I2C MIPI-CSI connector */
+			i2c@16380000 {
 				status = "okay";
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-names = "default";
 			};
 		};
 
@@ -104,10 +183,8 @@
 			i2c@12460000 {
 				status = "okay";
 				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
 
-				eeprom: eeprom@52 {
+				eeprom@52 {
 					compatible = "atmel,24c128";
 					reg = <0x52>;
 					pagesize = <32>;
@@ -115,11 +192,34 @@
 			};
 		};
 
+		gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+			spi4: spi@1a280000 {
+				status = "okay";
+				num-cs = <1>;
+				cs-gpios = <&tlmm_pinmux 53 0>;
+			};
+		};
+
+		gsbi@16500000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_UART_W_FC>;
+
+			serial@16540000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi6_uart_4pins>;
+			};
+		};
+
 		gsbi@16600000 {
 			status = "ok";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 			serial@16640000 {
 				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi7_uart_2pins>;
 			};
 		};
 
@@ -171,15 +271,52 @@
 			status = "okay";
 		};
 
+		pci@1b500000 {
+			status = "ok";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&ext_3p3v>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					wlan_default_gpios: wlan-gpios {
+						pios {
+							pins = "gpio43";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+
+					notify_led: nled {
+						pios {
+							pins = "gpio18";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+				};
+			};
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
 			sdcc3: sdcc@12180000 {
 				status = "okay";
+				vmmc-supply = <&pm8921_l6>;
 				pinctrl-names	= "default";
 				pinctrl-0	= <&card_detect>;
 				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
@@ -187,6 +324,9 @@
 			/* WLAN */
 			sdcc4: sdcc@121c0000 {
 				status = "okay";
+				vmmc-supply = <&ext_3p3v>;
+				vqmmc-supply = <&pm8921_lvs1>;
+				mmc-pwrseq = <&sdcc4_pwrseq>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
new file mode 100644
index 000000000..6b801e7e5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -0,0 +1,287 @@
+
+&tlmm_pinmux {
+	sdc4_gpios: sdc4-gpios {
+		pios {
+			pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+			function = "sdc4";
+		};
+	};
+
+	sdcc1_pins: sdcc1-pin-active {
+		clk {
+			pins = "sdc1_clk";
+			drive-strengh = <16>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc1_cmd";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc1_data";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdcc3_pins: sdcc3-pin-active {
+		clk {
+			pins = "sdc3_clk";
+			drive-strengh = <8>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc3_cmd";
+			drive-strengh = <8>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc3_data";
+			drive-strengh = <8>;
+			bias-pull-up;
+		};
+	};
+
+	ps_hold: ps_hold {
+		mux {
+			pins = "gpio78";
+			function = "ps_hold";
+		};
+	};
+
+	i2c1_pins: i2c1 {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gsbi1";
+		};
+
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_sleep: i2c1_pins_sleep {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	gsbi1_uart_2pins: gsbi1_uart_2pins {
+		mux {
+			pins = "gpio18", "gpio19";
+			function = "gsbi1";
+		};
+	};
+
+	gsbi1_uart_4pins: gsbi1_uart_4pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio20", "gpio21";
+			function = "gsbi1";
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gsbi2";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_sleep: i2c2_pins_sleep {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c3_pins: i2c3 {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gsbi3";
+		};
+
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins_sleep: i2c3_pins_sleep {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c4_pins: i2c4 {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gsbi4";
+		};
+
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins_sleep: i2c4_pins_sleep {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	spi5_default: spi5_default {
+		pinmux {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+		};
+
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio53";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio54";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		pinconf_cs {
+			pins = "gpio53";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep: spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c6_pins_sleep: i2c6_pins_sleep {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	gsbi6_uart_2pins: gsbi6_uart_2pins {
+		mux {
+			pins = "gpio14", "gpio15";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi6_uart_4pins: gsbi6_uart_4pins {
+		mux {
+			pins = "gpio14", "gpio15", "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi7_uart_2pins: gsbi7_uart_2pins {
+		mux {
+			pins = "gpio82", "gpio83";
+			function = "gsbi7";
+		};
+	};
+
+	gsbi7_uart_4pins: gsbi7_uart_4pins {
+		mux {
+			pins = "gpio82", "gpio83", "gpio84", "gpio85";
+			function = "gsbi7";
+		};
+	};
+
+	i2c7_pins: i2c7 {
+		mux {
+			pins = "gpio84", "gpio85";
+			function = "gsbi7";
+		};
+
+		pinconf {
+			pins = "gpio84", "gpio85";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c7_pins_sleep: i2c7_pins_sleep {
+		mux {
+			pins = "gpio84", "gpio85";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio84", "gpio85";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
new file mode 100644
index 000000000..ebd675ca9
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -0,0 +1,394 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z";
+	compatible = "sony,xperia-yuga", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	soc {
+		pinctrl@800000 {
+			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+				rx {
+					pins = "gpio52";
+					function = "gsbi5";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				tx {
+					pins = "gpio51";
+					function = "gsbi5";
+					drive-strength = <4>;
+					bias-disable;
+				};
+			};
+
+
+			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+				pins = "gpio26";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+
+		rpm@108000 {
+			regulators {
+				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs_1_3_6-supply = <&pm8921_s4>;
+				vin_lvs_4_5_7-supply = <&pm8921_s4>;
+				vin_ncp-supply = <&pm8921_l6>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_l24-supply = <&pm8921_s1>;
+				vin_l25-supply = <&pm8921_s1>;
+				vin_l27-supply = <&pm8921_s7>;
+				vin_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				s8 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+
+				/* PMOS LDO */
+				l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					bias-pull-down;
+				};
+
+				l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l10 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					bias-pull-down;
+				};
+
+				l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				l17 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				l18 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l21 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				l22 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+
+				l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				l27 {
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				l28 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				l29 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs2 {
+					bias-pull-down;
+				};
+
+				lvs3 {
+					bias-pull-down;
+				};
+
+				lvs4 {
+					bias-pull-down;
+				};
+
+				lvs5 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+
+				lvs7 {
+					bias-pull-down;
+				};
+
+				usb-switch {};
+
+				hdmi-switch {};
+
+				ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					gpio_keys_pin_a: gpio-keys-pin-active {
+						pins = "gpio3", "gpio4", "gpio29", "gpio35";
+						function = "normal";
+
+						bias-pull-up;
+						drive-push-pull;
+						input-enable;
+						power-source = <2>;
+						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+						qcom,pull-up-strength = <0>;
+					};
+				};
+			};
+		};
+
+		phy@12500000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		gadget@12500000 {
+			status = "okay";
+		};
+
+		gsbi@1a200000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@1a240000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi5_uart_pin_a>;
+			};
+		};
+
+		amba {
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+
+				vmmc-supply = <&pm8921_l6>;
+				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index df2061ec6..9dc83b09d 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -5,13 +5,24 @@
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-
 / {
 	model = "Qualcomm APQ8064";
 	compatible = "qcom,apq8064";
 	interrupt-parent = <&intc>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@80000000 {
+			reg = <0x80000000 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -81,6 +92,134 @@
 		interrupts = <1 10 0x304>;
 	};
 
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	sfpb_mutex: hwmutex {
+		compatible = "qcom,sfpb-mutex";
+		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+
+		hwlocks = <&sfpb_mutex 3>;
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		modem@0 {
+			interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&l2cc 8 3>;
+			qcom,smd-edge = <0>;
+
+			status = "disabled";
+		};
+
+		q6@1 {
+			interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&l2cc 8 15>;
+			qcom,smd-edge = <1>;
+
+			status = "disabled";
+		};
+
+		dsps@3 {
+			interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
+			qcom,smd-edge = <3>;
+
+			status = "disabled";
+		};
+
+		riva@6 {
+			interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&l2cc 8 25>;
+			qcom,smd-edge = <6>;
+
+			status = "disabled";
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&l2cc 8 4>;
+		qcom,ipc-2 = <&l2cc 8 14>;
+		qcom,ipc-3 = <&l2cc 8 23>;
+		qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		q6_smsm: q6@2 {
+			reg = <2>;
+			interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@3 {
+			reg = <3>;
+			interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		dsps_smsm: dsps@4 {
+			reg = <4>;
+			interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-apq8064";
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -99,34 +238,11 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&ps_hold>;
+		};
 
-			sdc4_gpios: sdc4-gpios {
-				pios {
-					pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-					function = "sdc4";
-				};
-			};
-
-			ps_hold: ps_hold {
-				mux {
-					pins = "gpio78";
-					function = "ps_hold";
-				};
-			};
-
-			i2c1_pins: i2c1 {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "gsbi1";
-				};
-			};
-
-			i2c3_pins: i2c3 {
-				mux {
-					pins = "gpio8", "gpio9";
-					function = "gsbi3";
-				};
-			};
+		sfpb_wrapper_mutex: syscon@1200000 {
+			compatible = "syscon";
+			reg = <0x01200000 0x8000>;
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -138,7 +254,8 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			compatible = "qcom,kpss-timer",
+				     "qcom,kpss-wdt-apq8064", "qcom,msm-timer";
 			interrupts = <1 1 0x301>,
 				     <1 2 0x301>,
 				     <1 3 0x301>;
@@ -192,6 +309,11 @@
 			regulator;
 		};
 
+		sps_sic_non_secure: sps-sic-non-secure@12100000 {
+			compatible	= "syscon";
+			reg		= <0x12100000 0x10000>;
+		};
+
 		gsbi1: gsbi@12440000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
@@ -205,8 +327,21 @@
 
 			syscon-tcsr = <&tcsr>;
 
-			i2c1: i2c@12460000 {
+			gsbi1_serial: serial@12450000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12450000 0x100>,
+				      <0x12400000 0x03>;
+				interrupts = <0 193 0x0>;
+				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi1_i2c: i2c@12460000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-1 = <&i2c1_pins_sleep>;
+				pinctrl-names = "default", "sleep";
 				reg = <0x12460000 0x1000>;
 				interrupts = <0 194 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
@@ -214,6 +349,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 		};
 
 		gsbi2: gsbi@12480000 {
@@ -229,9 +365,12 @@
 
 			syscon-tcsr = <&tcsr>;
 
-			i2c2: i2c@124a0000 {
+			gsbi2_i2c: i2c@124a0000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x124a0000 0x1000>;
+				pinctrl-0 = <&i2c2_pins>;
+				pinctrl-1 = <&i2c2_pins_sleep>;
+				pinctrl-names = "default", "sleep";
 				interrupts = <0 196 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
@@ -243,20 +382,119 @@
 		gsbi3: gsbi@16200000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
 			reg = <0x16200000 0x100>;
 			clocks = <&gcc GSBI3_H_CLK>;
 			clock-names = "iface";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-
-			i2c3: i2c@16280000 {
+			gsbi3_i2c: i2c@16280000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c3_pins>;
+				pinctrl-1 = <&i2c3_pins_sleep>;
+				pinctrl-names = "default", "sleep";
 				reg = <0x16280000 0x1000>;
 				interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI3_QUP_CLK>,
 					 <&gcc GSBI3_H_CLK>;
 				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x03>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi4_i2c: i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c4_pins>;
+				pinctrl-1 = <&i2c4_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16380000 0x1000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI4_QUP_CLK>,
+					 <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x03>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi5_serial: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x100>,
+				      <0x1a200000 0x03>;
+				interrupts = <0 154 0x0>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_spi: spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+				pinctrl-0 = <&spi5_default>;
+				pinctrl-1 = <&spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi6: gsbi@16500000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <6>;
+			reg = <0x16500000 0x03>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi6_serial: serial@16540000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16540000 0x100>,
+				      <0x16500000 0x03>;
+				interrupts = <0 156 0x0>;
+				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c6_pins>;
+				pinctrl-1 = <&i2c6_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI6_QUP_CLK>,
+					 <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
 			};
 		};
 
@@ -281,12 +519,134 @@
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
+
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c7_pins>;
+				pinctrl-1 = <&i2c7_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI7_QUP_CLK>,
+					 <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
 		};
 
 		qcom,ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8921";
+				interrupt-parent = <&tlmm_pinmux>;
+				interrupts = <74 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8921_gpio: gpio@150 {
+
+					compatible = "qcom,pm8921-gpio",
+						     "qcom,ssbi-gpio";
+					reg = <0x150>;
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
+					gpio-controller;
+					#gpio-cells = <2>;
+
+				};
+
+				pm8921_mpps: mpps@50 {
+					compatible = "qcom,pm8921-mpp",
+						     "qcom,ssbi-mpp";
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupts =
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 1>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				pwrkey@1c {
+					compatible = "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@900000 {
@@ -325,12 +685,63 @@
 					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
+			rpmcc: clock-controller {
+				compatible	= "qcom,rpmcc-apq8064", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
 			regulators {
 				compatible = "qcom,rpm-pm8921-regulators";
 
+				pm8921_s1: s1 {};
+				pm8921_s2: s2 {};
+				pm8921_s3: s3 {};
+				pm8921_s4: s4 {};
+				pm8921_s7: s7 {};
+				pm8921_s8: s8 {};
+
+				pm8921_l1: l1 {};
+				pm8921_l2: l2 {};
+				pm8921_l3: l3 {};
+				pm8921_l4: l4 {};
+				pm8921_l5: l5 {};
+				pm8921_l6: l6 {};
+				pm8921_l7: l7 {};
+				pm8921_l8: l8 {};
+				pm8921_l9: l9 {};
+				pm8921_l10: l10 {};
+				pm8921_l11: l11 {};
+				pm8921_l12: l12 {};
+				pm8921_l14: l14 {};
+				pm8921_l15: l15 {};
+				pm8921_l16: l16 {};
+				pm8921_l17: l17 {};
+				pm8921_l18: l18 {};
+				pm8921_l21: l21 {};
+				pm8921_l22: l22 {};
+				pm8921_l23: l23 {};
+				pm8921_l24: l24 {};
+				pm8921_l25: l25 {};
+				pm8921_l26: l26 {};
+				pm8921_l27: l27 {};
+				pm8921_l28: l28 {};
+				pm8921_l29: l29 {};
+
+				pm8921_lvs1: lvs1 {};
+				pm8921_lvs2: lvs2 {};
+				pm8921_lvs3: lvs3 {};
+				pm8921_lvs4: lvs4 {};
+				pm8921_lvs5: lvs5 {};
+				pm8921_lvs6: lvs6 {};
+				pm8921_lvs7: lvs7 {};
+
+				pm8921_usb_switch: usb-switch {};
+
 				pm8921_hdmi_switch: hdmi-switch {
 					bias-pull-down;
 				};
+
+				pm8921_ncp: ncp {};
 			};
 		};
 
@@ -423,7 +834,7 @@
 		};
 
 		sata0: sata@29000000 {
-			compatible		= "generic-ahci";
+			compatible		= "qcom,apq8064-ahci", "generic-ahci";
 			status			= "disabled";
 			reg			= <0x29000000 0x180>;
 			interrupts		= <GIC_SPI 209 IRQ_TYPE_NONE>;
@@ -445,17 +856,10 @@
 
 			phys			= <&sata_phy0>;
 			phy-names		= "sata-phy";
+			ports-implemented	= <0x1>;
 		};
 
 		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
 		sdcc1bam:dma@12402000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
@@ -487,13 +891,15 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 			sdcc1: sdcc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
+				pinctrl-names	= "default";
+				pinctrl-0	= <&sdcc1_pins>;
 				arm,primecell-periphid = <0x00051180>;
 				reg		= <0x12400000 0x2000>;
 				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
@@ -505,7 +911,6 @@
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
 				dma-names = "tx", "rx";
 			};
@@ -524,7 +929,6 @@
 				cap-mmc-highspeed;
 				max-frequency	= <192000000>;
 				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
 				dma-names = "tx", "rx";
 			};
@@ -542,8 +946,6 @@
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 				max-frequency	= <48000000>;
-				vmmc-supply = <&vsdcc_fixed>;
-				vqmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
@@ -555,5 +957,42 @@
 			compatible = "qcom,tcsr-apq8064", "syscon";
 			reg = <0x1a400000 0x100>;
 		};
+
+		pcie: pci@1b500000 {
+			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
+			reg = <0x1b500000 0x1000
+			       0x1b502000 0x80
+			       0x1b600000 0x100
+			       0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
+				  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
+			interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_REF_CLK>;
+			clock-names = "core", "iface", "phy";
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy";
+			status = "disabled";
+		};
 	};
 };
+#include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index d484d0816..ad51df27d 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -6,6 +6,16 @@
 	model = "Qualcomm APQ8074 Dragonboard";
 	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
 
+	aliases {
+		serial0 = &blsp1_uart2;
+		usid0 = &pm8941_0;
+		usid4 = &pm8841_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	soc {
 		serial@f991e000 {
 			status = "ok";
@@ -15,11 +25,23 @@
 			bus-width = <8>;
 			non-removable;
 			status = "ok";
+
+			vmmc-supply = <&pm8941_l20>;
+			vqmmc-supply = <&pm8941_s3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc1_pin_a>;
 		};
 
 		sdhci@f98a4900 {
 			cd-gpios = <&msmgpio 62 0x1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
 			bus-width = <4>;
+			status = "ok";
+
+			vmmc-supply = <&pm8941_l21>;
+			vqmmc-supply = <&pm8941_l13>;
 		};
 
 
@@ -49,6 +71,42 @@
 					function = "blsp_spi8";
 				};
 			};
+
+			sdhc1_pin_a: sdhc1-pin-active {
+				clk {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+				pins = "gpio62";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdhc2_pin_a: sdhc2-pin-active {
+				clk {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		i2c@f9967000 {
@@ -65,4 +123,203 @@
 			};
 		};
 	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vin_5vs-supply = <&pm8941_5v>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-boot-on;
+						regulator-system-load = <200000>;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index f7725b966..2052b84a7 100644
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -3,7 +3,16 @@
 
 / {
 	model = "Qualcomm APQ8084/IFC6540";
-	compatible = "qcom,apq8084-ifc6540", "qcom,apq8084";
+	compatible = "qcom,apq8084-sbc", "qcom,apq8084";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+		usid0 = &pma8084_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
 	soc {
 		serial@f995e000 {
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
index cb43acfc5..d174d15bc 100644
--- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -5,6 +5,15 @@
 	model = "Qualcomm APQ 8084-MTP";
 	compatible = "qcom,apq8084-mtp", "qcom,apq8084";
 
+	aliases {
+		serial0 = &blsp2_uart2;
+		usid0 = &pma8084_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	soc {
 		serial@f995e000 {
 			status = "okay";
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 7084010ee..7c2df062a 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -10,6 +10,17 @@
 	compatible = "qcom,apq8084";
 	interrupt-parent = <&intc>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_mem: smem_region@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -75,11 +86,33 @@
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
 	};
 
+	clocks {
+		xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 2 0xf08>,
@@ -89,6 +122,15 @@
 		clock-frequency = <19200000>;
 	};
 
+	smem {
+		compatible = "qcom,smem";
+
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		memory-region = <&smem_mem>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -103,6 +145,11 @@
 			      <0xf9002000 0x1000>;
 		};
 
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -221,9 +268,26 @@
 			compatible = "qcom,gcc-apq8084";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x4000>;
 		};
 
+		tcsr_mutex_regs: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
+		tcsr_mutex: hwlock {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_regs 0 0x80>;
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
 		tlmm: pinctrl@fd510000 {
 			compatible = "qcom,apq8084-pinctrl";
 			reg = <0xfd510000 0x4000>;
@@ -234,7 +298,7 @@
 			interrupts = <0 208 0>;
 		};
 
-		serial@f995e000 {
+		blsp2_uart2: serial@f995e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995e000 0x1000>;
 			interrupts = <0 114 0x0>;
@@ -281,4 +345,71 @@
 			#interrupt-cells = <4>;
 		};
 	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <0 168 1>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-apq8084";
+				qcom,smd-channels = "rpm_requests";
+
+				pma8084-regulators {
+					compatible = "qcom,rpm-pma8084-regulators";
+
+					pma8084_s1: s1 {};
+					pma8084_s2: s2 {};
+					pma8084_s3: s3 {};
+					pma8084_s4: s4 {};
+					pma8084_s5: s5 {};
+					pma8084_s6: s6 {};
+					pma8084_s7: s7 {};
+					pma8084_s8: s8 {};
+					pma8084_s9: s9 {};
+					pma8084_s10: s10 {};
+					pma8084_s11: s11 {};
+					pma8084_s12: s12 {};
+
+					pma8084_l1: l1 {};
+					pma8084_l2: l2 {};
+					pma8084_l3: l3 {};
+					pma8084_l4: l4 {};
+					pma8084_l5: l5 {};
+					pma8084_l6: l6 {};
+					pma8084_l7: l7 {};
+					pma8084_l8: l8 {};
+					pma8084_l9: l9 {};
+					pma8084_l10: l10 {};
+					pma8084_l11: l11 {};
+					pma8084_l12: l12 {};
+					pma8084_l13: l13 {};
+					pma8084_l14: l14 {};
+					pma8084_l15: l15 {};
+					pma8084_l16: l16 {};
+					pma8084_l17: l17 {};
+					pma8084_l18: l18 {};
+					pma8084_l19: l19 {};
+					pma8084_l20: l20 {};
+					pma8084_l21: l21 {};
+					pma8084_l22: l22 {};
+					pma8084_l23: l23 {};
+					pma8084_l24: l24 {};
+					pma8084_l25: l25 {};
+					pma8084_l26: l26 {};
+					pma8084_l27: l27 {};
+
+					pma8084_lvs1: lvs1 {};
+					pma8084_lvs2: lvs2 {};
+					pma8084_lvs3: lvs3 {};
+					pma8084_lvs4: lvs4 {};
+
+					pma8084_5vs1: 5vs1 {};
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
new file mode 100644
index 000000000..0d92f1bc3
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -0,0 +1,22 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
new file mode 100644
index 000000000..b9457dd21
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -0,0 +1,112 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
+	compatible = "qcom,ipq4019";
+
+	clocks {
+                xo: xo {
+                        compatible = "fixed-clock";
+                        clock-frequency = <48000000>;
+                        #clock-cells = <0>;
+                };
+	};
+
+	soc {
+
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <1 2 0xf08>,
+				     <1 3 0xf08>,
+				     <1 4 0xf08>,
+				     <1 1 0xf08>;
+			clock-frequency = <48000000>;
+		};
+
+		pinctrl@0x01000000 {
+			serial_pins: serial_pinmux {
+				mux {
+					pins = "gpio60", "gpio61";
+					function = "blsp_uart0";
+					bias-disable;
+				};
+			};
+
+			spi_0_pins: spi_0_pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio55", "gpio56", "gpio57";
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio54";
+				};
+				pinconf {
+					pins = "gpio55", "gpio56", "gpio57";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				pinconf_cs {
+					pins = "gpio54";
+					drive-strength = <2>;
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		blsp_dma: dma@7884000 {
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 {
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 54 0>;
+
+			mx25l25635e@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "mx25l25635e";
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		cryptobam: dma@8e04000 {
+			status = "ok";
+		};
+
+		crypto@8e3a000 {
+			status = "ok";
+		};
+
+		watchdog@b017000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
new file mode 100644
index 000000000..b7a24af8f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -0,0 +1,273 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019";
+	compatible = "qcom,ipq4019";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		spi0 = &spi_0;
+		i2c0 = &i2c_0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v1";
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			reg = <0x0>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+			operating-points = <
+				/* kHz	uV (fixed) */
+				48000	1100000
+				200000	1100000
+				500000	1100000
+				666000	1100000
+			>;
+			clock-latency = <256000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v1";
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			reg = <0x1>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v1";
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			reg = <0x2>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v1";
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			reg = <0x3>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			<0x0b002000 0x1000>;
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-ipq4019";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x1800000 0x60000>;
+		};
+
+		tlmm: pinctrl@0x01000000 {
+			compatible = "qcom,ipq4019-pinctrl";
+			reg = <0x01000000 0x300000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 208 0>;
+		};
+
+		blsp_dma: dma@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		spi_0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x78b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b7000 0x6000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+
+		cryptobam: dma@8e04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x08e04000 0x20000>;
+			interrupts = <GIC_SPI 207 0>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		crypto@8e3a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x08e3a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+                acc0: clock-controller@b088000 {
+                        compatible = "qcom,kpss-acc-v1";
+                        reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
+                };
+
+                acc1: clock-controller@b098000 {
+                        compatible = "qcom,kpss-acc-v1";
+                        reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
+                };
+
+                acc2: clock-controller@b0a8000 {
+                        compatible = "qcom,kpss-acc-v1";
+                        reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
+                };
+
+                acc3: clock-controller@b0b8000 {
+                        compatible = "qcom,kpss-acc-v1";
+                        reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
+                };
+
+                saw0: regulator@b089000 {
+                        compatible = "qcom,saw2";
+                        reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+                        regulator;
+                };
+
+                saw1: regulator@b099000 {
+                        compatible = "qcom,saw2";
+                        reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
+                        regulator;
+                };
+
+                saw2: regulator@b0a9000 {
+                        compatible = "qcom,saw2";
+                        reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
+                        regulator;
+                };
+
+                saw3: regulator@b0b9000 {
+                        compatible = "qcom,saw2";
+                        reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
+                        regulator;
+                };
+
+		serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			interrupts = <0 107 0>;
+			status = "disabled";
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+			dma-names = "rx", "tx";
+		};
+
+		serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78b0000 0x200>;
+			interrupts = <0 108 0>;
+			status = "disabled";
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
+			dma-names = "rx", "tx";
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
+			reg = <0xb017000 0x40>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <10>;
+			status = "disabled";
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x4ab000 0x4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 55b2910ef..d50138249 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -4,6 +4,14 @@
 	model = "Qualcomm IPQ8064/AP148";
 	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
 
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	reserved-memory {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 9f727d8ea..2e375576f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -62,6 +62,18 @@
 	};
 
 	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -110,7 +122,8 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			compatible = "qcom,kpss-timer",
+				     "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
 			interrupts = <1 1 0x301>,
 				     <1 2 0x301>,
 				     <1 3 0x301>,
@@ -197,7 +210,7 @@
 
 			syscon-tcsr = <&tcsr>;
 
-			serial@16340000 {
+			gsbi4_serial: serial@16340000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16340000 0x1000>,
 				      <0x16300000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index e0883c376..23de76455 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -6,6 +6,14 @@
 	model = "Qualcomm MSM8660 SURF";
 	compatible = "qcom,msm8660-surf", "qcom,msm8660";
 
+	aliases {
+		serial0 = &gsbi12_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	soc {
 		gsbi@19c00000 {
 			status = "ok";
@@ -15,15 +23,26 @@
 			};
 		};
 
+		/* Temporary fixed regulator */
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
 				status = "okay";
+				vmmc-supply = <&vsdcc_fixed>;
 			};
 
 			/* External micro SD card */
 			sdcc3: sdcc@12180000 {
 				status = "okay";
+				vmmc-supply = <&vsdcc_fixed>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index e0b2ce291..8c65e0d82 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -2,6 +2,7 @@
 
 /include/ "skeleton.dtsi"
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8660.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
@@ -42,6 +43,26 @@
 		interrupts = <1 9 0x304>;
 	};
 
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -67,15 +88,16 @@
 			cpu-offset = <0x40000>;
 		};
 
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
-			reg = <0x00800000 0x4000>;
+		tlmm: pinctrl@800000 {
+			compatible = "qcom,msm8660-pinctrl";
+			reg = <0x800000 0x4000>;
+
 			gpio-controller;
 			#gpio-cells = <2>;
-			ngpio = <173>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+
 		};
 
 		gcc: clock-controller@900000 {
@@ -97,15 +119,26 @@
 
 			syscon-tcsr = <&tcsr>;
 
-			serial@19c40000 {
+			gsbi12_serial: serial@19c40000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x19c40000 0x1000>,
 				      <0x19c00000 0x1000>;
-				interrupts = <0 195 0x0>;
+				interrupts = <0 195 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
+
+			gsbi12_i2c: i2c@19c80000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x19c80000 0x1000>;
+				interrupts = <0 196 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		qcom,ssbi@500000 {
@@ -115,13 +148,89 @@
 
 			pmicintc: pmic@0 {
 				compatible = "qcom,pm8058";
-				interrupt-parent = <&msmgpio>;
+				interrupt-parent = <&tlmm>;
 				interrupts = <88 8>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				pm8058_gpio: gpio@150 {
+					compatible = "qcom,pm8058-gpio",
+						     "qcom,ssbi-gpio";
+					reg = <0x150>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
+					gpio-controller;
+					#gpio-cells = <2>;
+
+				};
+
+				pm8058_mpps: mpps@50 {
+					compatible = "qcom,pm8058-mpp",
+						     "qcom,ssbi-mpp";
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-parent = <&pmicintc>;
+					interrupts =
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
+				};
+
 				pwrkey@1c {
 					compatible = "qcom,pm8058-pwrkey";
 					reg = <0x1c>;
@@ -141,11 +250,11 @@
 					row-hold = <91500>;
 				};
 
-				rtc@11d {
+				rtc@1e8 {
 					compatible = "qcom,pm8058-rtc";
+					reg = <0x1e8>;
 					interrupt-parent = <&pmicintc>;
 					interrupts = <39 1>;
-					reg = <0x11d>;
 					allow-set-time;
 				};
 
@@ -156,17 +265,97 @@
 			};
 		};
 
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
+		l2cc: clock-controller@2082000 {
+			compatible	= "syscon";
+			reg		= <0x02082000 0x1000>;
+		};
+
+		rpm: rpm@104000 {
+			compatible	= "qcom,rpm-msm8660";
+			reg		= <0x00104000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			rpmcc: clock-controller {
+				compatible	= "qcom,rpmcc-apq8660", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			pm8901-regulators {
+				compatible = "qcom,rpm-pm8901-regulators";
+
+				pm8901_l0: l0 {};
+				pm8901_l1: l1 {};
+				pm8901_l2: l2 {};
+				pm8901_l3: l3 {};
+				pm8901_l4: l4 {};
+				pm8901_l5: l5 {};
+				pm8901_l6: l6 {};
+
+				/* S0 and S1 Handled as SAW regulators by SPM */
+				pm8901_s2: s2 {};
+				pm8901_s3: s3 {};
+				pm8901_s4: s4 {};
+
+				pm8901_lvs0: lvs0 {};
+				pm8901_lvs1: lvs1 {};
+				pm8901_lvs2: lvs2 {};
+				pm8901_lvs3: lvs3 {};
+
+				pm8901_mvs: mvs {};
+			};
+
+			pm8058-regulators {
+				compatible = "qcom,rpm-pm8058-regulators";
+
+				pm8058_l0: l0 {};
+				pm8058_l1: l1 {};
+				pm8058_l2: l2 {};
+				pm8058_l3: l3 {};
+				pm8058_l4: l4 {};
+				pm8058_l5: l5 {};
+				pm8058_l6: l6 {};
+				pm8058_l7: l7 {};
+				pm8058_l8: l8 {};
+				pm8058_l9: l9 {};
+				pm8058_l10: l10 {};
+				pm8058_l11: l11 {};
+				pm8058_l12: l12 {};
+				pm8058_l13: l13 {};
+				pm8058_l14: l14 {};
+				pm8058_l15: l15 {};
+				pm8058_l16: l16 {};
+				pm8058_l17: l17 {};
+				pm8058_l18: l18 {};
+				pm8058_l19: l19 {};
+				pm8058_l20: l20 {};
+				pm8058_l21: l21 {};
+				pm8058_l22: l22 {};
+				pm8058_l23: l23 {};
+				pm8058_l24: l24 {};
+				pm8058_l25: l25 {};
+
+				pm8058_s0: s0 {};
+				pm8058_s1: s1 {};
+				pm8058_s2: s2 {};
+				pm8058_s3: s3 {};
+				pm8058_s4: s4 {};
+
+				pm8058_lvs0: lvs0 {};
+				pm8058_lvs1: lvs1 {};
+
+				pm8058_ncp: ncp {};
+			};
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -184,7 +373,6 @@
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
 			};
 
 			sdcc3: sdcc@12180000 {
@@ -201,7 +389,21 @@
 				cap-mmc-highspeed;
 				max-frequency	= <48000000>;
 				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
+			};
+
+			sdcc5: sdcc@12200000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12200000 0x8000>;
+				interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <48000000>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7f70fae90..b72a55462 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -6,6 +6,14 @@
 	model = "Qualcomm MSM8960 CDP";
 	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
 
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	soc {
 		gsbi@16400000 {
 			status = "ok";
@@ -26,6 +34,308 @@
 				status = "okay";
 			};
 		};
+
+		rpm@108000 {
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+				vdd_ncp-supply = <&pm8921_l6>;
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l21_l23_l29-supply = <&pm8921_s8>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				pm8921_s1: s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s2: s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8921_s3: s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				pm8921_s4: s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				pm8921_s7: s7 {
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s8: s8 {
+					regulator-always-on;
+					regulator-min-microvolt = <2050000>;
+					regulator-max-microvolt = <2050000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* PMOS LDO */
+				pm8921_l1: l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8921_l2: l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l3: l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				pm8921_l4: l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l6: l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l7: l7 {
+					regulator-always-on;
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l8: l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l9: l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l10: l10 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l11: l11 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8921_l12: l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l14: l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l15: l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l16: l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l17: l17 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l18: l18 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					bias-pull-down;
+				};
+
+				pm8921_l21: l21 {
+					regulator-min-microvolt = <1900000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8921_l22: l22 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <2750000>;
+					bias-pull-down;
+				};
+
+				pm8921_l23: l23 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l24: l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8921_l25: l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8921_lvs1: lvs1 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs2: lvs2 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs3: lvs3 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs4: lvs4 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs5: lvs5 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs7: lvs7 {
+					bias-pull-down;
+				};
+
+				pm8921_ncp: ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+
+		gsbi@16000000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_SPI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_default>;
+			spi@16080000 {
+				status = "ok";
+				eth@0 {
+					compatible = "micrel,ks8851";
+					reg = <0>;
+					interrupt-parent = <&msmgpio>;
+					interrupts = <90 8>;
+					spi-max-frequency = <5400000>;
+					vdd-supply = <&ext_l2>;
+					vdd-io-supply = <&pm8921_lvs6>;
+					reset-gpios = <&msmgpio 89 0>;
+				};
+			};
+		};
+
+		pinctrl@800000 {
+			spi1_default: spi1_default {
+				mux {
+					pins = "gpio6", "gpio7", "gpio9";
+					function = "gsbi1";
+				};
+
+				mosi {
+					pins = "gpio6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				miso {
+					pins = "gpio7";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs {
+					pins = "gpio8";
+					drive-strength = <12>;
+					bias-disable;
+					output-low;
+				};
+
+				clk {
+					pins = "gpio9";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		ext_l2: gpio-regulator@91 {
+			compatible = "regulator-fixed";
+			regulator-name = "ext_l2";
+			gpio = <&msmgpio 91 0>;
+			startup-delay-us = <10000>;
+			enable-active-high;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index a02b984cc..288f56e0c 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 
 / {
@@ -48,6 +49,29 @@
 		qcom,no-pc-write;
 	};
 
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -63,7 +87,8 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			compatible = "qcom,kpss-timer",
+				     "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
 			interrupts = <1 1 0x301>,
 				     <1 2 0x301>,
 				     <1 3 0x301>;
@@ -73,11 +98,10 @@
 			cpu-offset = <0x80000>;
 		};
 
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,msm8960-pinctrl";
 			gpio-controller;
 			#gpio-cells = <2>;
-			ngpio = <150>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -105,6 +129,24 @@
 			#reset-cells = <1>;
 		};
 
+		l2cc: clock-controller@2011000 {
+			compatible	= "syscon";
+			reg		= <0x2011000 0x1000>;
+		};
+
+		rpm@108000 {
+			compatible	= "qcom,rpm-msm8960";
+			reg		= <0x108000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+			};
+		};
+
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
@@ -139,7 +181,7 @@
 
 			syscon-tcsr = <&tcsr>;
 
-			serial@16440000 {
+			gsbi5_serial: serial@16440000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
@@ -210,7 +252,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -253,5 +295,30 @@
 			compatible = "qcom,tcsr-msm8960", "syscon";
 			reg = <0x1a400000 0x100>;
 		};
+
+		gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16080000 0x1000>;
+				interrupts = <0 147 0>;
+				spi-max-frequency = <24000000>;
+				cs-gpios = <&msmgpio 8 0>;
+
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index bd35b0674..3fb4dada6 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -1,19 +1,423 @@
 #include "qcom-msm8974.dtsi"
 #include "qcom-pm8841.dtsi"
 #include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "Sony Xperia Z1";
 	compatible = "sony,xperia-honami", "qcom,msm8974";
 
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
 	memory@0 {
 		reg = <0 0x40000000>, <0x40000000 0x40000000>;
 		device_type = "memory";
 	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+					vin_5vs-supply = <&pm8941_5v>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s4 {
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-boot-on;
+						regulator-system-load = <200000>;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+     };
 };
 
 &soc {
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	sdhci@f98a4900 {
+		status = "ok";
+
+		bus-width = <4>;
+
+		vmmc-supply = <&pm8941_l21>;
+		vqmmc-supply = <&pm8941_l13>;
+
+		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+	};
+
 	serial@f991e000 {
 		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp1_uart2_pin_a>;
+	};
+
+	pinctrl@fd510000 {
+		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+			rx {
+				pins = "gpio5";
+				function = "blsp_uart2";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			tx {
+				pins = "gpio4";
+				function = "blsp_uart2";
+
+				drive-strength = <4>;
+				bias-disable;
+			};
+		};
+
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+
+		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+			pins = "gpio62";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		 };
+
+		sdhc2_pin_a: sdhc2-pin-active {
+			clk {
+				pins = "sdc2_clk";
+				drive-strength = <10>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc2_cmd", "sdc2_data";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+	};
+
+	dma-controller@f9944000 {
+		qcom,controlled-remotely;
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		charger@1000 {
+			qcom,fast-charge-safe-current = <1500000>;
+			qcom,fast-charge-current-limit = <1500000>;
+			qcom,dc-current-limit = <1800000>;
+			qcom,fast-charge-safe-voltage = <4400000>;
+			qcom,fast-charge-high-threshold-voltage = <4350000>;
+			qcom,fast-charge-low-threshold-voltage = <3400000>;
+			qcom,auto-recharge-threshold-voltage = <4200000>;
+			qcom,minimum-input-voltage = <4300000>;
+		};
+
+		gpios@c000 {
+			boost_bypass_n_pin: boost-bypass {
+				pins = "gpio21";
+				function = "normal";
+			};
+
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3", "gpio4", "gpio5";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+		};
+
+		coincell@2800 {
+			status = "ok";
+			qcom,rset-ohms = <2100>;
+			qcom,vset-millivolts = <3000>;
+		};
+	};
+
+	pm8941@1 {
+		wled@d800 {
+			status = "ok";
+
+			qcom,cs-out;
+			qcom,current-limit = <20>;
+			qcom,current-boost-limit = <805>;
+			qcom,switching-freq = <1600>;
+			qcom,ovp = <29>;
+			qcom,num-strings = <2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 37b47b553..561d4d136 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include "skeleton.dtsi"
 
@@ -9,6 +9,62 @@
 	compatible = "qcom,msm8974";
 	interrupt-parent = <&intc>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss@08000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
+		};
+
+		mba@00d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
+		};
+
+		reserved@0d200000 {
+			reg = <0x0d200000 0xa00000>;
+			no-map;
+		};
+
+		adsp@0dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
+
+		venus@0f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+
+		tz@0fc00000 {
+			reg = <0x0fc00000 0x160000>;
+			no-map;
+		};
+
+		rfsa@0fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@0fd80000 {
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+		};
+
+		unused@0ff00000 {
+			reg = <0x0ff00000 0x10100000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -80,6 +136,20 @@
 		interrupts = <1 7 0xf04>;
 	};
 
+	clocks {
+		xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 2 0xf08>,
@@ -89,6 +159,115 @@
 		clock-frequency = <19200000>;
 	};
 
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-2 = <&apcs 8 9>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		adsp_smsm: adsp@2 {
+			reg = <2>;
+			interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@7 {
+			reg = <7>;
+			interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -103,6 +282,11 @@
 			      <0xf9002000 0x1000>;
 		};
 
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -217,17 +401,36 @@
 			compatible = "qcom,gcc-msm8974";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x4000>;
 		};
 
+		tcsr_mutex_block: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
 		mmcc: clock-controller@fd8c0000 {
 			compatible = "qcom,mmcc-msm8974";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 			reg = <0xfd8c0000 0x6000>;
 		};
 
-		serial@f991e000 {
+		tcsr_mutex: tcsr-mutex {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_block 0 0x80>;
+
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
 			interrupts = <0 108 0x0>;
@@ -275,8 +478,30 @@
 			interrupts = <0 208 0>;
 		};
 
+		i2c@f9924000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9924000 0x1000>;
+			interrupts = <0 96 IRQ_TYPE_NONE>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp_i2c8: i2c@f9964000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9964000 0x1000>;
+			interrupts = <0 102 IRQ_TYPE_NONE>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		blsp_i2c11: i2c@f9967000 {
-			status = "disable";
+			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9967000 0x1000>;
 			interrupts = <0 105 IRQ_TYPE_NONE>;
@@ -284,6 +509,8 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
 		};
 
 		spmi_bus: spmi@fc4cf000 {
@@ -301,5 +528,91 @@
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
+
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		modem {
+			interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&apcs 8 12>;
+			qcom,smd-edge = <0>;
+		};
+
+		rpm {
+			interrupts = <0 168 1>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8974";
+				qcom,smd-channels = "rpm_requests";
+
+				pm8841-regulators {
+					compatible = "qcom,rpm-pm8841-regulators";
+
+					pm8841_s1: s1 {};
+					pm8841_s2: s2 {};
+					pm8841_s3: s3 {};
+					pm8841_s4: s4 {};
+					pm8841_s5: s5 {};
+					pm8841_s6: s6 {};
+					pm8841_s7: s7 {};
+					pm8841_s8: s8 {};
+				};
+
+				pm8941-regulators {
+					compatible = "qcom,rpm-pm8941-regulators";
+
+					pm8941_s1: s1 {};
+					pm8941_s2: s2 {};
+					pm8941_s3: s3 {};
+					pm8941_5v: s4 {};
+
+					pm8941_l1: l1 {};
+					pm8941_l2: l2 {};
+					pm8941_l3: l3 {};
+					pm8941_l4: l4 {};
+					pm8941_l5: l5 {};
+					pm8941_l6: l6 {};
+					pm8941_l7: l7 {};
+					pm8941_l8: l8 {};
+					pm8941_l9: l9 {};
+					pm8941_l10: l10 {};
+					pm8941_l11: l11 {};
+					pm8941_l12: l12 {};
+					pm8941_l13: l13 {};
+					pm8941_l14: l14 {};
+					pm8941_l15: l15 {};
+					pm8941_l16: l16 {};
+					pm8941_l17: l17 {};
+					pm8941_l18: l18 {};
+					pm8941_l19: l19 {};
+					pm8941_l20: l20 {};
+					pm8941_l21: l21 {};
+					pm8941_l22: l22 {};
+					pm8941_l23: l23 {};
+					pm8941_l24: l24 {};
+
+					pm8941_lvs1: lvs1 {};
+					pm8941_lvs2: lvs2 {};
+					pm8941_lvs3: lvs3 {};
+
+					pm8941_5vs1: 5vs1 {};
+					pm8941_5vs2: 5vs2 {};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
index 8f1a0b162..0512f6459 100644
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -3,15 +3,15 @@
 
 &spmi_bus {
 
-	usid4: pm8841@4 {
-		compatible = "qcom,spmi-pmic";
+	pm8841_0: pm8841@4 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
 		reg = <0x4 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm8841_mpps: mpps@a000 {
-			compatible = "qcom,pm8841-mpp";
-			reg = <0xa000 0x400>;
+			compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
@@ -22,13 +22,13 @@
 
 		temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
 		};
 	};
 
-	usid5: pm8841@5 {
-		compatible = "qcom,spmi-pmic";
+	pm8841_1: pm8841@5 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
 		reg = <0x5 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index aa774e685..d95edb6f6 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -4,31 +4,52 @@
 
 &spmi_bus {
 
-	usid0: pm8941@0 {
-		compatible ="qcom,spmi-pmic";
+	pm8941_0: pm8941@0 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000 0x100>,
-			      <0x6100 0x100>;
+			reg = <0x6000>,
+			      <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		pwrkey@800 {
 			compatible = "qcom,pm8941-pwrkey";
-			reg = <0x800 0x100>;
+			reg = <0x800>;
 			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 			debounce = <15625>;
 			bias-pull-up;
 		};
 
+		charger@1000 {
+			compatible = "qcom,pm8941-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+		};
+
 		pm8941_gpios: gpios@c000 {
-			compatible = "qcom,pm8941-gpio";
-			reg = <0xc000 0x2400>;
+			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -70,8 +91,8 @@
 		};
 
 		pm8941_mpps: mpps@a000 {
-			compatible = "qcom,pm8941-mpp";
-			reg = <0xa000 0x800>;
+			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -86,7 +107,7 @@
 
 		pm8941_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
 			io-channel-names = "thermal";
@@ -95,7 +116,7 @@
 
 		pm8941_vadc: vadc@3100 {
 			compatible = "qcom,spmi-vadc";
-			reg = <0x3100 0x100>;
+			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -120,30 +141,30 @@
 
 		pm8941_iadc: iadc@3600 {
 			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
-			reg = <0x3600 0x100>,
-				  <0x12f1 0x1>;
+			reg = <0x3600>;
 			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
 			qcom,external-resistor-micro-ohms = <10000>;
 		};
+
+		coincell@2800 {
+			compatible = "qcom,pm8941-coincell";
+			reg = <0x2800>;
+			status = "disabled";
+		};
 	};
 
-	usid1: pm8941@1 {
-		compatible = "qcom,spmi-pmic";
+	pm8941_1: pm8941@1 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		wled@d800 {
+		pm8941_wled: wled@d800 {
 			compatible = "qcom,pm8941-wled";
-			reg = <0xd800 0x100>;
+			reg = <0xd800>;
 			label = "backlight";
 
-			qcom,cs-out;
-			qcom,current-limit = <20>;
-			qcom,current-boost-limit = <805>;
-			qcom,switching-freq = <1600>;
-			qcom,ovp = <29>;
-			qcom,num-strings = <2>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 5e240ccc0..82d258094 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -4,23 +4,31 @@
 
 &spmi_bus {
 
-	usid0: pma8084@0 {
-		compatible = "qcom,spmi-pmic";
+	pma8084_0: pma8084@0 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000 0x100>,
-			      <0x6100 0x100>;
+			reg = <0x6000>,
+			      <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
+		pwrkey@800 {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+		};
+
 		pma8084_gpios: gpios@c000 {
-			compatible = "qcom,pma8084-gpio";
-			reg = <0xc000 0x1600>;
+			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -48,8 +56,8 @@
 		};
 
 		pma8084_mpps: mpps@a000 {
-			compatible = "qcom,pma8084-mpp";
-			reg = <0xa000 0x800>;
+			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -64,7 +72,7 @@
 
 		pma8084_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 			#thermal-sensor-cells = <0>;
 			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
@@ -73,7 +81,7 @@
 
 		pma8084_vadc: vadc@3100 {
 			compatible = "qcom,spmi-vadc";
-			reg = <0x3100 0x100>;
+			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -101,8 +109,8 @@
 		};
 	};
 
-	usid1: pma8084@1 {
-		compatible = "qcom,spmi-pmic";
+	pma8084_1: pma8084@1 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index a9da7a89f..118a8e2b8 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -17,15 +17,15 @@
 	compatible = "renesas,genmai", "renesas,r7s72100";
 
 	aliases {
-		serial2 = &scif2;
+		serial0 = &scif2;
 	};
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif2;
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@8000000 {
 		device_type = "memory";
 		reg = <0x08000000 0x08000000>;
 	};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 277e73c11..e8e2a5d71 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -36,46 +37,41 @@
 		#size-cells = <1>;
 
 		/* External clocks */
-		extal_clk: extal_clk {
+		extal_clk: extal {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			/* If clk present, value must be set by board */
 			clock-frequency = <0>;
-			clock-output-names = "extal";
 		};
 
-		usb_x1_clk: usb_x1_clk {
+		usb_x1_clk: usb_x1 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			/* If clk present, value must be set by board */
 			clock-frequency = <0>;
-			clock-output-names = "usb_x1";
 		};
 
 		/* Fixed factor clocks */
-		b_clk: b_clk {
+		b_clk: b {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
 			clock-mult = <1>;
 			clock-div = <3>;
-			clock-output-names = "b";
 		};
-		p1_clk: p1_clk {
+		p1_clk: p1 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
 			clock-mult = <1>;
 			clock-div = <6>;
-			clock-output-names = "p1";
 		};
-		p0_clk: p0_clk {
+		p0_clk: p0 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
 			clock-mult = <1>;
 			clock-div = <12>;
-			clock-output-names = "p0";
 		};
 
 		/* Special CPG clocks */
@@ -86,6 +82,7 @@
 			reg = <0xfcfe0000 0x18>;
 			clocks = <&extal_clk>, <&usb_x1_clk>;
 			clock-output-names = "pll", "i", "g";
+			#power-domain-cells = <0>;
 		};
 
 		/* MSTP clocks */
@@ -151,107 +148,116 @@
 	scif0: serial@e8007000 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8007000 64>;
-		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 191 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 192 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif1: serial@e8007800 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8007800 64>;
-		interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 195 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 196 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 193 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif2: serial@e8008000 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8008000 64>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 200 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 197 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif3: serial@e8008800 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8008800 64>;
-		interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 203 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 204 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 201 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif4: serial@e8009000 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8009000 64>;
-		interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 207 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 208 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 205 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif5: serial@e8009800 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8009800 64>;
-		interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 211 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 212 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif6: serial@e800a000 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe800a000 64>;
-		interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 215 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 216 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif7: serial@e800a800 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe800a800 64>;
-		interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 219 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 220 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 217 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	spi0: spi@e800c800 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800c800 0x24>;
-		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -261,11 +267,12 @@
 	spi1: spi@e800d000 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800d000 0x24>;
-		interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 242 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -275,11 +282,12 @@
 	spi2: spi@e800d800 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800d800 0x24>;
-		interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 245 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -289,11 +297,12 @@
 	spi3: spi@e800e000 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800e000 0x24>;
-		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 248 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -303,11 +312,12 @@
 	spi4: spi@e800e800 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800e800 0x24>;
-		interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 251 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -315,7 +325,7 @@
 	};
 
 	gic: interrupt-controller@e8201000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
@@ -328,16 +338,17 @@
 		#size-cells = <0>;
 		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
 		reg = <0xfcfee000 0x44>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 158 IRQ_TYPE_EDGE_RISING>,
-			     <0 159 IRQ_TYPE_EDGE_RISING>,
-			     <0 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
 		clock-frequency = <100000>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -346,16 +357,17 @@
 		#size-cells = <0>;
 		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
 		reg = <0xfcfee400 0x44>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 166 IRQ_TYPE_EDGE_RISING>,
-			     <0 167 IRQ_TYPE_EDGE_RISING>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 169 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 170 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
 		clock-frequency = <100000>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -364,16 +376,17 @@
 		#size-cells = <0>;
 		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
 		reg = <0xfcfee800 0x44>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 174 IRQ_TYPE_EDGE_RISING>,
-			     <0 175 IRQ_TYPE_EDGE_RISING>,
-			     <0 176 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 177 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 178 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 179 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
 		clock-frequency = <100000>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -382,26 +395,28 @@
 		#size-cells = <0>;
 		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
 		reg = <0xfcfeec00 0x44>;
-		interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 182 IRQ_TYPE_EDGE_RISING>,
-			     <0 183 IRQ_TYPE_EDGE_RISING>,
-			     <0 184 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 185 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 186 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 187 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
 		clock-frequency = <100000>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	mtu2: timer@fcff0000 {
 		compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
 		reg = <0xfcff0000 0x400>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "tgi0a";
 		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index a4c425923..ec7c86e06 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -23,7 +23,7 @@
 
 	chosen {
 		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
-		stdout-path = &scifa0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -36,7 +36,7 @@
 		reg = <2 0x00000000 0 0x40000000>;
 	};
 
-	vcc_mmc0: regulator@0 {
+	vcc_mmc0: regulator-mmc0 {
 		compatible = "regulator-fixed";
 		regulator-name = "MMC0 Vcc";
 		regulator-min-microvolt = <2800000>;
@@ -44,7 +44,7 @@
 		regulator-always-on;
 	};
 
-	vcc_sdhi0: regulator@1 {
+	vcc_sdhi0: regulator-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -56,7 +56,7 @@
 	};
 
 	/* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
-	ape6evm_fixed_1v8: regulator@2 {
+	ape6evm_fixed_1v8: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "1V8";
 		regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@
 		regulator-always-on;
 	};
 
-	ape6evm_fixed_3v3: regulator@3 {
+	ape6evm_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
@@ -110,7 +110,7 @@
 			gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_0>;
 			label = "S16";
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu-key {
@@ -188,29 +188,29 @@
 };
 
 &pfc {
-	scifa0_pins: serial0 {
-		renesas,groups = "scifa0_data";
-		renesas,function = "scifa0";
+	scifa0_pins: scifa0 {
+		groups = "scifa0_data";
+		function = "scifa0";
 	};
 
-	mmc0_pins: mmc {
-		renesas,groups = "mmc0_data8", "mmc0_ctrl";
-		renesas,function = "mmc0";
+	mmc0_pins: mmc0 {
+		groups = "mmc0_data8", "mmc0_ctrl";
+		function = "mmc0";
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		renesas,function = "sdhi0";
+		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		function = "sdhi0";
 	};
 
 	sdhi1_pins: sd1 {
-		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
-		renesas,function = "sdhi1";
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
 	};
 
 	keyboard_pins: keyboard {
-		renesas,pins = "PORT324", "PORT325", "PORT326", "PORT327",
-			       "PORT328", "PORT329";
+		pins = "PORT324", "PORT325", "PORT326", "PORT327", "PORT328",
+		       "PORT329";
 		bias-pull-up;
 	};
 };
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 7ee22a41c..ca8672778 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -29,6 +29,25 @@
 			reg = <0>;
 			clock-frequency = <1500000000>;
 			power-domains = <&pd_a2sl>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			clocks = <&cpg_clocks R8A73A4_CLK_Z>;
+			power-domains = <&pd_a3sm>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA7: cache-controller@100 {
+			compatible = "cache";
+			reg = <0x100>;
+			clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
+			power-domains = <&pd_a3km>;
+			cache-unified;
+			cache-level = <2>;
 		};
 	};
 
@@ -39,10 +58,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	dbsc1: memory-controller@e6790000 {
@@ -69,27 +88,27 @@
 		dma0: dma-controller@e6700020 {
 			compatible = "renesas,shdma-r8a73a4";
 			reg = <0 0xe6700020 0 0x89e0>;
-			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-					0 200 IRQ_TYPE_LEVEL_HIGH
-					0 201 IRQ_TYPE_LEVEL_HIGH
-					0 202 IRQ_TYPE_LEVEL_HIGH
-					0 203 IRQ_TYPE_LEVEL_HIGH
-					0 204 IRQ_TYPE_LEVEL_HIGH
-					0 205 IRQ_TYPE_LEVEL_HIGH
-					0 206 IRQ_TYPE_LEVEL_HIGH
-					0 207 IRQ_TYPE_LEVEL_HIGH
-					0 208 IRQ_TYPE_LEVEL_HIGH
-					0 209 IRQ_TYPE_LEVEL_HIGH
-					0 210 IRQ_TYPE_LEVEL_HIGH
-					0 211 IRQ_TYPE_LEVEL_HIGH
-					0 212 IRQ_TYPE_LEVEL_HIGH
-					0 213 IRQ_TYPE_LEVEL_HIGH
-					0 214 IRQ_TYPE_LEVEL_HIGH
-					0 215 IRQ_TYPE_LEVEL_HIGH
-					0 216 IRQ_TYPE_LEVEL_HIGH
-					0 217 IRQ_TYPE_LEVEL_HIGH
-					0 218 IRQ_TYPE_LEVEL_HIGH
-					0 219 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -106,7 +125,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe60b0000 0 0x428>;
-		interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IIC5>;
 		power-domains = <&pd_a3sp>;
 
@@ -116,7 +135,7 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;
@@ -131,38 +150,38 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 5 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 6 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 7 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 8 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 10 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 11 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 23 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
 		power-domains = <&pd_c4>;
 	};
@@ -172,32 +191,32 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0200 0 0x200>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 50 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
 		power-domains = <&pd_c4>;
 	};
@@ -207,6 +226,13 @@
 		reg = <0 0xe6050000 0 0x9000>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges =
+			<&pfc 0 0 31>, <&pfc 32 32 9>,
+			<&pfc 64 64 22>, <&pfc 96 96 31>,
+			<&pfc 128 128 7>, <&pfc 160 160 19>,
+			<&pfc 192 192 31>, <&pfc 224 224 27>,
+			<&pfc 256 256 28>, <&pfc 288 288 21>,
+			<&pfc 320 320 10>;
 		interrupts-extended =
 			<&irqc0  0 0>, <&irqc0  1 0>, <&irqc0  2 0>, <&irqc0  3 0>,
 			<&irqc0  4 0>, <&irqc0  5 0>, <&irqc0  6 0>, <&irqc0  7 0>,
@@ -230,7 +256,7 @@
 		compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
 			 <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
 		power-domains = <&pd_c5>;
 	};
@@ -240,7 +266,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6500000 0 0x428>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC0>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -251,7 +277,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6510000 0 0x428>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -262,7 +288,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6520000 0 0x428>;
-		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC2>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -273,7 +299,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6530000 0 0x428>;
-		interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IIC3>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -284,7 +310,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6540000 0 0x428>;
-		interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IIC4>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -295,7 +321,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6550000 0 0x428>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC6>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -306,7 +332,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6560000 0 0x428>;
-		interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC7>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -317,7 +343,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6570000 0 0x428>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A73A4_CLK_IIC8>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -326,9 +352,9 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
 		reg = <0 0xe6c20000 0 0x100>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -336,9 +362,9 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
 		reg = <0 0xe6c30000 0 0x100>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -346,9 +372,9 @@
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
 		reg = <0 0xe6c40000 0 0x100>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -356,9 +382,9 @@
 	scifa1: serial@e6c50000 {
 		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
 		reg = <0 0xe6c50000 0 0x100>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -366,9 +392,9 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
 		reg = <0 0xe6ce0000 0 0x100>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -376,9 +402,9 @@
 	scifb3: serial@e6cf0000 {
 		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
 		reg = <0 0xe6cf0000 0 0x100>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_c4>;
 		status = "disabled";
 	};
@@ -386,7 +412,7 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee100000 0 0x100>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -396,7 +422,7 @@
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee120000 0 0x100>;
-		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -406,7 +432,7 @@
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -416,7 +442,7 @@
 	mmcif0: mmc@ee200000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
 		power-domains = <&pd_a3sp>;
 		reg-io-width = <4>;
@@ -426,7 +452,7 @@
 	mmcif1: mmc@ee220000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0 0xee220000 0 0x80>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
 		power-domains = <&pd_a3sp>;
 		reg-io-width = <4>;
@@ -434,7 +460,7 @@
 	};
 
 	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
@@ -442,7 +468,7 @@
 			<0 0xf1002000 0 0x1000>,
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	bsc: bus@fec10000 {
@@ -462,37 +488,32 @@
 		ranges;
 
 		/* External root clocks */
-		extalr_clk: extalr_clk {
+		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
-			clock-output-names = "extalr";
 		};
-		extal1_clk: extal1_clk {
+		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
-			clock-output-names = "extal1";
 		};
-		extal2_clk: extal2_clk {
+		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <48000000>;
-			clock-output-names = "extal2";
 		};
-		fsiack_clk: fsiack_clk {
+		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
-			clock-output-names = "fsiack";
 		};
-		fsibck_clk: fsibck_clk {
+		fsibck_clk: fsibck {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
-			clock-output-names = "fsibck";
 		};
 
 		/* Special CPG clocks */
@@ -516,171 +537,151 @@
 			#clock-cells = <0>;
 			clock-output-names = "zb";
 		};
-		sdhi0_clk: sdhi0_clk@e6150074 {
+		sdhi0_clk: sdhi0ck@e6150074 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150074 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sdhi0ck";
 		};
-		sdhi1_clk: sdhi1_clk@e6150078 {
+		sdhi1_clk: sdhi1ck@e6150078 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150078 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sdhi1ck";
 		};
-		sdhi2_clk: sdhi2_clk@e615007c {
+		sdhi2_clk: sdhi2ck@e615007c {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615007c 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sdhi2ck";
 		};
-		mmc0_clk: mmc0_clk@e6150240 {
+		mmc0_clk: mmc0@e6150240 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150240 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "mmc0";
 		};
-		mmc1_clk: mmc1_clk@e6150244 {
+		mmc1_clk: mmc1@e6150244 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150244 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "mmc1";
 		};
-		vclk1_clk: vclk1_clk@e6150008 {
+		vclk1_clk: vclk1@e6150008 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150008 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>, <&main_div2_clk>,
 				 <&extalr_clk>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk1";
 		};
-		vclk2_clk: vclk2_clk@e615000c {
+		vclk2_clk: vclk2@e615000c {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615000c 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>, <&main_div2_clk>,
 				 <&extalr_clk>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk2";
 		};
-		vclk3_clk: vclk3_clk@e615001c {
+		vclk3_clk: vclk3@e615001c {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615001c 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>, <&main_div2_clk>,
 				 <&extalr_clk>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk3";
 		};
-		vclk4_clk: vclk4_clk@e6150014 {
+		vclk4_clk: vclk4@e6150014 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150014 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>, <&main_div2_clk>,
 				 <&extalr_clk>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk4";
 		};
-		vclk5_clk: vclk5_clk@e6150034 {
+		vclk5_clk: vclk5@e6150034 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150034 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <0>, <&extal2_clk>, <&main_div2_clk>,
 				 <&extalr_clk>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk5";
 		};
-		fsia_clk: fsia_clk@e6150018 {
+		fsia_clk: fsia@e6150018 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150018 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <&fsiack_clk>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "fsia";
 		};
-		fsib_clk: fsib_clk@e6150090 {
+		fsib_clk: fsib@e6150090 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150090 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <&fsibck_clk>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "fsib";
 		};
-		mp_clk: mp_clk@e6150080 {
+		mp_clk: mp@e6150080 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150080 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <&extal2_clk>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "mp";
 		};
-		m4_clk: m4_clk@e6150098 {
+		m4_clk: m4@e6150098 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150098 0 4>;
 			clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>;
 			#clock-cells = <0>;
-			clock-output-names = "m4";
 		};
-		hsi_clk: hsi_clk@e615026c {
+		hsi_clk: hsi@e615026c {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615026c 0 4>;
 			clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>,
 				 <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "hsi";
 		};
-		spuv_clk: spuv_clk@e6150094 {
+		spuv_clk: spuv@e6150094 {
 			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150094 0 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
 				 <&extal2_clk>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "spuv";
 		};
 
 		/* Fixed factor clocks */
-		main_div2_clk: main_div2_clk {
+		main_div2_clk: main_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A73A4_CLK_MAIN>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "main_div2";
 		};
-		pll0_div2_clk: pll0_div2_clk {
+		pll0_div2_clk: pll0_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A73A4_CLK_PLL0>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "pll0_div2";
 		};
-		pll1_div2_clk: pll1_div2_clk {
+		pll1_div2_clk: pll1_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A73A4_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "pll1_div2";
 		};
-		extal1_div2_clk: extal1_div2_clk {
+		extal1_div2_clk: extal1_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&extal1_clk>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "extal1_div2";
 		};
 
 		/* Gate clocks */
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 2e31d8c01..788507542 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -20,20 +20,20 @@
 	compatible = "renesas,armadillo800eva", "renesas,r8a7740";
 
 	aliases {
-		serial1 = &scifa1;
+		serial0 = &scifa1;
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-		stdout-path = &scifa1;
+		bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
 
-	reg_3p3v: regulator@0 {
+	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -42,7 +42,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_sdhi0: regulator@1 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@2 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -69,7 +69,7 @@
 		enable-active-high;
 	};
 
-	reg_5p0v: regulator@3 {
+	reg_5p0v: regulator-5p0v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-5.0V";
 		regulator-min-microvolt = <5000000>;
@@ -85,7 +85,7 @@
 			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "SW3";
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back-key {
@@ -127,7 +127,7 @@
 		};
 	};
 
-	i2c2: i2c@2 {
+	i2c2: i2c-2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
@@ -180,7 +180,7 @@
 };
 
 &extal1_clk {
-	clock-frequency = <25000000>;
+	clock-frequency = <24000000>;
 };
 &extal2_clk {
 	clock-frequency = <48000000>;
@@ -224,40 +224,53 @@
 };
 
 &pfc {
+	pinctrl-0 = <&lcd0_pins>;
+	pinctrl-names = "default";
+
 	ether_pins: ether {
-		renesas,groups = "gether_mii", "gether_int";
-		renesas,function = "gether";
+		groups = "gether_mii", "gether_int";
+		function = "gether";
 	};
 
-	scifa1_pins: serial1 {
-		renesas,groups = "scifa1_data";
-		renesas,function = "scifa1";
+	scifa1_pins: scifa1 {
+		groups = "scifa1_data";
+		function = "scifa1";
 	};
 
 	st1232_pins: touchscreen {
-		renesas,groups = "intc_irq10";
-		renesas,function = "intc";
+		groups = "intc_irq10";
+		function = "intc";
 	};
 
 	backlight_pins: backlight {
-		renesas,groups = "tpu0_to2_1";
-		renesas,function = "tpu0";
+		groups = "tpu0_to2_1";
+		function = "tpu0";
 	};
 
 	mmc0_pins: mmc0 {
-		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
-		renesas,function = "mmc0";
+		groups = "mmc0_data8_1", "mmc0_ctrl_1";
+		function = "mmc0";
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
-		renesas,function = "sdhi0";
+		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+		function = "sdhi0";
 	};
 
 	fsia_pins: sounda {
-		renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
-				 "fsia_data_in_1", "fsia_data_out_0";
-		renesas,function = "fsia";
+		groups = "fsia_sclk_in", "fsia_mclk_out",
+			 "fsia_data_in_1", "fsia_data_out_0";
+		function = "fsia";
+	};
+
+	lcd0_pins: lcd0 {
+		groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync";
+		function = "lcd0";
+
+		/* DBGMD/LCDC0/FSIA MUX */
+		gpio-hog;
+		gpios = <176 0>;
+		output-high;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index d84714468..159e04eb1 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -11,6 +11,7 @@
 /include/ "skeleton.dtsi"
 
 #include <dt-bindings/clock/r8a7740-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -26,17 +27,30 @@
 			reg = <0x0>;
 			clock-frequency = <800000000>;
 			power-domains = <&pd_a3sm>;
+			next-level-cache = <&L2>;
 		};
 	};
 
 	gic: interrupt-controller@c2800000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0xc2800000 0x1000>,
 		      <0xc2000000 0x1000>;
 	};
 
+	L2: cache-controller@f0100000 {
+		compatible = "arm,pl310-cache";
+		reg = <0xf0100000 0x1000>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_a3sm>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		arm,shared-override;
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	dbsc3: memory-controller@fe400000 {
 		compatible = "renesas,dbsc3-r8a7740";
 		reg = <0xfe400000 0x400>;
@@ -45,7 +59,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	ptm {
@@ -56,7 +70,7 @@
 	cmt1: timer@e6138000 {
 		compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
 		reg = <0xe6138000 0x170>;
-		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;
@@ -76,14 +90,14 @@
 			<0xe6900020 1>,
 			<0xe6900040 1>,
 			<0xe6900060 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -98,14 +112,14 @@
 			<0xe6900024 1>,
 			<0xe6900044 1>,
 			<0xe6900064 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -120,14 +134,14 @@
 			<0xe6900028 1>,
 			<0xe6900048 1>,
 			<0xe6900068 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -142,14 +156,14 @@
 			<0xe690002c 1>,
 			<0xe690004c 1>,
 			<0xe690006c 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -158,7 +172,7 @@
 		compatible = "renesas,gether-r8a7740";
 		reg = <0xe9a00000 0x800>,
 		      <0xe9a01800 0x800>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
 		power-domains = <&pd_a4s>;
 		phy-mode = "mii";
@@ -172,10 +186,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xfff20000 0x425>;
-		interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
 		power-domains = <&pd_a4r>;
 		status = "disabled";
@@ -186,10 +200,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xe6c20000 0x425>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
-			      0 71 IRQ_TYPE_LEVEL_HIGH
-			      0 72 IRQ_TYPE_LEVEL_HIGH
-			      0 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -198,9 +212,9 @@
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c40000 0x100>;
-		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -208,9 +222,9 @@
 	scifa1: serial@e6c50000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c50000 0x100>;
-		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -218,9 +232,9 @@
 	scifa2: serial@e6c60000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c60000 0x100>;
-		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -228,9 +242,9 @@
 	scifa3: serial@e6c70000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c70000 0x100>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -238,9 +252,9 @@
 	scifa4: serial@e6c80000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c80000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -248,9 +262,9 @@
 	scifa5: serial@e6cb0000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6cb0000 0x100>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -258,9 +272,9 @@
 	scifa6: serial@e6cc0000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6cc0000 0x100>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -268,9 +282,9 @@
 	scifa7: serial@e6cd0000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6cd0000 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -278,9 +292,9 @@
 	scifb: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7740", "renesas,scifb";
 		reg = <0xe6c30000 0x100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -291,6 +305,7 @@
 		      <0xe605800c 0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges = <&pfc 0 0 212>;
 		interrupts-extended =
 			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
 			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
@@ -315,8 +330,8 @@
 	mmcif0: mmc@e6bd0000 {
 		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
-		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
-			      0 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_MMC>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -325,9 +340,9 @@
 	sdhi0: sd@e6850000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6850000 0x100>;
-		interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
-			      0 118 IRQ_TYPE_LEVEL_HIGH
-			      0 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -338,9 +353,9 @@
 	sdhi1: sd@e6860000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6860000 0x100>;
-		interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
-			      0 122 IRQ_TYPE_LEVEL_HIGH
-			      0 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -351,9 +366,9 @@
 	sdhi2: sd@e6870000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6870000 0x100>;
-		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
-			      0 126 IRQ_TYPE_LEVEL_HIGH
-			      0 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -365,7 +380,7 @@
 		#sound-dai-cells = <1>;
 		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
 		reg = <0xfe1f0000 0x400>;
-		interrupts = <0 9 0x4>;
+		interrupts = <GIC_SPI 9 0x4>;
 		clocks = <&mstp3_clks R8A7740_CLK_FSI>;
 		power-domains = <&pd_a4mp>;
 		status = "disabled";
@@ -374,9 +389,9 @@
 	tmu0: timer@fff80000 {
 		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
 		reg = <0xfff80000 0x2c>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 200 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
@@ -389,9 +404,9 @@
 	tmu1: timer@fff90000 {
 		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
 		reg = <0xfff90000 0x2c>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
@@ -407,53 +422,45 @@
 		ranges;
 
 		/* External root clock */
-		extalr_clk: extalr_clk {
+		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
-			clock-output-names = "extalr";
 		};
-		extal1_clk: extal1_clk {
+		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "extal1";
 		};
-		extal2_clk: extal2_clk {
+		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "extal2";
 		};
-		dv_clk: dv_clk {
+		dv_clk: dv {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
-			clock-output-names = "dv";
 		};
-		fmsick_clk: fmsick_clk {
+		fmsick_clk: fmsick {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "fmsick";
 		};
-		fmsock_clk: fmsock_clk {
+		fmsock_clk: fmsock {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "fmsock";
 		};
-		fsiack_clk: fsiack_clk {
+		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "fsiack";
 		};
-		fsibck_clk: fsibck_clk {
+		fsibck_clk: fsibck {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "fsibck";
 		};
 
 		/* Special CPG clocks */
@@ -471,7 +478,7 @@
 		};
 
 		/* Variable factor clocks (DIV6) */
-		vclk1_clk: vclk1_clk@e6150008 {
+		vclk1_clk: vclk1@e6150008 {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150008 4>;
 			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
@@ -479,9 +486,8 @@
 				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
 				 <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk1";
 		};
-		vclk2_clk: vclk2_clk@e615000c {
+		vclk2_clk: vclk2@e615000c {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615000c 4>;
 			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
@@ -489,77 +495,67 @@
 				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
 				 <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk2";
 		};
-		fmsi_clk: fmsi_clk@e6150010 {
+		fmsi_clk: fmsi@e6150010 {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150010 4>;
 			clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "fmsi";
 		};
-		fmso_clk: fmso_clk@e6150014 {
+		fmso_clk: fmso@e6150014 {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150014 4>;
 			clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "fmso";
 		};
-		fsia_clk: fsia_clk@e6150018 {
+		fsia_clk: fsia@e6150018 {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150018 4>;
 			clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "fsia";
 		};
-		sub_clk: sub_clk@e6150080 {
+		sub_clk: sub@e6150080 {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150080 4>;
 			clocks = <&pllc1_div2_clk>,
 				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "sub";
 		};
-		spu_clk: spu_clk@e6150084 {
+		spu_clk: spu@e6150084 {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150084 4>;
 			clocks = <&pllc1_div2_clk>,
 				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "spu";
 		};
-		vou_clk: vou_clk@e6150088 {
+		vou_clk: vou@e6150088 {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150088 4>;
 			clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>,
 				 <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vou";
 		};
-		stpro_clk: stpro_clk@e615009c {
+		stpro_clk: stpro@e615009c {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615009c 4>;
 			clocks = <&cpg_clocks R8A7740_CLK_PLLC0>;
 			#clock-cells = <0>;
-			clock-output-names = "stpro";
 		};
 
 		/* Fixed factor clocks */
-		pllc1_div2_clk: pllc1_div2_clk {
+		pllc1_div2_clk: pllc1_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "pllc1_div2";
 		};
-		extal1_div2_clk: extal1_div2_clk {
+		extal1_div2_clk: extal1_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&extal1_clk>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "extal1_div2";
 		};
 
 		/* Gate clocks */
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
deleted file mode 100644
index dffa6ff30..000000000
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "bockw";
-	compatible = "renesas,bockw-reference", "renesas,r8a7778";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
-		stdout-path = &scif0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x10000000>;
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	ethernet@18300000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18300000 0x1000>;
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-};
-
-&mmcif {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	broken-cd;
-	status = "okay";
-};
-
-&irqpin {
-	status = "okay";
-};
-
-&tmu0 {
-	status = "okay";
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_a", "scif0_ctrl";
-		renesas,function = "scif0";
-	};
-
-	mmc_pins: mmc {
-		renesas,groups = "mmc_data8", "mmc_ctrl";
-		renesas,function = "mmc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0_a";
-		renesas,function = "hspi0";
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl008k", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "data(spi)";
-			reg = <0x00000000 0x00100000>;
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 90543b12d..211d239d9 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -28,16 +28,16 @@
 	};
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
-		stdout-path = &scif0;
+		bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x10000000>;
 	};
 
-	fixedregulator3v3: fixedregulator@0 {
+	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -126,50 +126,67 @@
 };
 
 &pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_a", "scif0_ctrl";
-		renesas,function = "scif0";
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_a", "scif0_ctrl";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
 	};
 
 	mmc_pins: mmc {
-		renesas,groups = "mmc_data8", "mmc_ctrl";
-		renesas,function = "mmc";
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd";
-		renesas,function = "sdhi0";
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+	sdhi0_pup_pins: sd0_pup {
+		groups = "sdhi0_cd", "sdhi0_wp";
+		function = "sdhi0";
+		bias-pull-up;
 	};
 
 	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0_a";
-		renesas,function = "hspi0";
+		groups = "hspi0_a";
+		function = "hspi0";
 	};
 
 	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
+		groups = "usb0";
+		function = "usb0";
 	};
 
 	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
+		groups = "usb1";
+		function = "usb1";
 	};
 
 	vin0_pins: vin0 {
-		renesas,groups = "vin0_data8", "vin0_clk";
-		renesas,function = "vin0";
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
 	};
 
 	vin1_pins: vin1 {
-		renesas,groups = "vin1_data8", "vin1_clk";
-		renesas,function = "vin1";
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
 	};
 };
 
+&rcar_sound {
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+};
+
 &sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-0 = <&sdhi0_pins>, <&sdhi0_pup_pins>;
 	pinctrl-names = "default";
 
 	vmmc-supply = <&fixedregulator3v3>;
@@ -184,16 +201,20 @@
 	status = "okay";
 
 	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "spansion,s25fl008k", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
 		m25p,fast-read;
 
-		partition@0 {
-			label = "data(spi)";
-			reg = <0x00000000 0x00100000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "data(spi)";
+				reg = <0x00000000 0x00100000>;
+			};
 		};
 	};
 };
@@ -202,5 +223,11 @@
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
 
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 7ce9f5fd5..e571d66ea 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -17,6 +17,7 @@
 /include/ "skeleton.dtsi"
 
 #include <dt-bindings/clock/r8a7778-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -51,8 +52,9 @@
 	ether: ethernet@fde00000 {
 		compatible = "renesas,ether-r8a7778";
 		reg = <0xfde00000 0x400>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7778_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -60,7 +62,7 @@
 	};
 
 	gic: interrupt-controller@fe438000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0xfe438000 0x1000>,
@@ -78,17 +80,17 @@
 			<0xfe780024 4>,
 			<0xfe780044 4>,
 			<0xfe780064 4>;
-		interrupts =   <0 27 IRQ_TYPE_LEVEL_HIGH
-				0 28 IRQ_TYPE_LEVEL_HIGH
-				0 29 IRQ_TYPE_LEVEL_HIGH
-				0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =   <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		sense-bitfield-width = <2>;
 	};
 
 	gpio0: gpio@ffc40000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc40000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
@@ -99,7 +101,7 @@
 	gpio1: gpio@ffc41000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc41000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 32 32>;
@@ -110,7 +112,7 @@
 	gpio2: gpio@ffc42000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc42000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
@@ -121,7 +123,7 @@
 	gpio3: gpio@ffc43000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc43000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
@@ -132,7 +134,7 @@
 	gpio4: gpio@ffc44000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc44000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 27>;
@@ -150,8 +152,9 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc70000 0x1000>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -160,8 +163,9 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc71000 0x1000>;
-		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -170,8 +174,9 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc72000 0x1000>;
-		interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
@@ -180,19 +185,21 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc73000 0x1000>;
-		interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	tmu0: timer@ffd80000 {
 		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
 		reg = <0xffd80000 0x30>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		#renesas,channels = <3>;
 
@@ -202,11 +209,12 @@
 	tmu1: timer@ffd81000 {
 		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
 		reg = <0xffd81000 0x30>;
-		interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		#renesas,channels = <3>;
 
@@ -216,11 +224,12 @@
 	tmu2: timer@ffd82000 {
 		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
 		reg = <0xffd82000 0x30>;
-		interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
 		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
 
 		#renesas,channels = <3>;
 
@@ -228,10 +237,15 @@
 	};
 
 	rcar_sound: sound@ffd90000 {
-		#sound-dai-cells = <1>;
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
 		compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
 		reg =	<0xffd90000 0x1000>,	/* SRU */
-			<0xffd91000 0x1240>,	/* SSI */
+			<0xffd91000 0x240>,	/* SSI */
 			<0xfffe0000 0x24>;	/* ADG */
 		clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
 			<&mstp3_clks R8A7778_CLK_SSI7>,
@@ -262,117 +276,140 @@
 		status = "disabled";
 
 		rcar_sound,src {
-			src3: src@3 { };
-			src4: src@4 { };
-			src5: src@5 { };
-			src6: src@6 { };
-			src7: src@7 { };
-			src8: src@8 { };
-			src9: src@9 { };
+			src3: src-3 { };
+			src4: src-4 { };
+			src5: src-5 { };
+			src6: src-6 { };
+			src7: src-7 { };
+			src8: src-8 { };
+			src9: src-9 { };
 		};
 
 		rcar_sound,ssi {
-			ssi3: ssi@3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi4: ssi@4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi5: ssi@5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi6: ssi@6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi7: ssi@7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi8: ssi@8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi9: ssi@9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi3: ssi-3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi4: ssi-4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi5: ssi-5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi6: ssi-6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi7: ssi-7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi8: ssi-8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi9: ssi-9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
 		};
 	};
 
 	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe40000 0x100>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF0>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe41000 0x100>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF1>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe42000 0x100>;
-		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF2>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe43000 0x100>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF3>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe44000 0x100>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF4>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe45000 0x100>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF5>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	mmcif: mmc@ffe4e000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0xffe4e000 0x100>;
-		interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_MMC>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	sdhi0: sd@ffe4c000 {
 		compatible = "renesas,sdhi-r8a7778";
 		reg = <0xffe4c000 0x100>;
-		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	sdhi1: sd@ffe4d000 {
 		compatible = "renesas,sdhi-r8a7778";
 		reg = <0xffe4d000 0x100>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI1>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	sdhi2: sd@ffe4f000 {
 		compatible = "renesas,sdhi-r8a7778";
 		reg = <0xffe4f000 0x100>;
-		interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI2>;
+		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	hspi0: spi@fffc7000 {
 		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -381,8 +418,9 @@
 	hspi1: spi@fffc8000 {
 		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -391,8 +429,9 @@
 	hspi2: spi@fffc6000 {
 		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -404,11 +443,18 @@
 		ranges;
 
 		/* External input clock */
-		extal_clk: extal_clk {
+		extal_clk: extal {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "extal";
+		};
+
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 
 		/* Special CPG clocks */
@@ -419,65 +465,58 @@
 			clocks = <&extal_clk>;
 			clock-output-names = "plla", "pllb", "b",
 					     "out", "p", "s", "s1";
+			#power-domain-cells = <0>;
 		};
 
 		/* Audio clocks; frequencies are set by boards if applicable. */
 		audio_clk_a: audio_clk_a {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-output-names = "audio_clk_a";
 		};
 		audio_clk_b: audio_clk_b {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-output-names = "audio_clk_b";
 		};
 		audio_clk_c: audio_clk_c {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-output-names = "audio_clk_c";
 		};
 
 		/* Fixed ratio clocks */
-		g_clk: g_clk {
+		g_clk: g {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
 			#clock-cells = <0>;
 			clock-div = <12>;
 			clock-mult = <1>;
-			clock-output-names = "g";
 		};
-		i_clk: i_clk {
+		i_clk: i {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
 			#clock-cells = <0>;
 			clock-div = <1>;
 			clock-mult = <1>;
-			clock-output-names = "i";
 		};
-		s3_clk: s3_clk {
+		s3_clk: s3 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
 			#clock-cells = <0>;
 			clock-div = <4>;
 			clock-mult = <1>;
-			clock-output-names = "s3";
 		};
-		s4_clk: s4_clk {
+		s4_clk: s4 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "s4";
 		};
-		z_clk: z_clk {
+		z_clk: z {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7778_CLK_PLLB>;
 			#clock-cells = <0>;
 			clock-div = <1>;
 			clock-mult = <1>;
-			clock-output-names = "z";
 		};
 
 		/* Gate clocks */
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 20afea6f0..541678df9 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -19,21 +19,21 @@
 	compatible = "renesas,marzen", "renesas,r8a7779";
 
 	aliases {
-		serial2 = &scif2;
-		serial4 = &scif4;
+		serial0 = &scif2;
+		serial1 = &scif4;
 	};
 
 	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
-		stdout-path = &scif2;
+		bootargs = "ignore_loglevel root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
 
-	fixedregulator3v3: fixedregulator@0 {
+	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -165,46 +165,54 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	du_pins: du {
 		du0 {
-			renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
-			renesas,function = "du0";
+			groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
+			function = "du0";
 		};
 		du1 {
-			renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
-			renesas,function = "du1";
+			groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
+			function = "du1";
 		};
 	};
 
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+
 	ethernet_pins: ethernet {
 		intc {
-			renesas,groups = "intc_irq1_b";
-			renesas,function = "intc";
+			groups = "intc_irq1_b";
+			function = "intc";
 		};
 		lbsc {
-			renesas,groups = "lbsc_ex_cs0";
-			renesas,function = "lbsc";
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
 		};
 	};
 
-	scif2_pins: serial2 {
-		renesas,groups = "scif2_data_c";
-		renesas,function = "scif2";
+	scif2_pins: scif2 {
+		groups = "scif2_data_c";
+		function = "scif2";
 	};
 
-	scif4_pins: serial4 {
-		renesas,groups = "scif4_data";
-		renesas,function = "scif4";
+	scif4_pins: scif4 {
+		groups = "scif4_data";
+		function = "scif4";
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		renesas,function = "sdhi0";
+		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		function = "sdhi0";
 	};
 
 	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0";
-		renesas,function = "hspi0";
+		groups = "hspi0";
+		function = "hspi0";
 	};
 };
 
@@ -222,6 +230,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 5c8071e87..b9bbcce69 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/r8a7779-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7779-sysc.h>
 
 / {
 	compatible = "renesas,r8a7779";
@@ -34,18 +35,21 @@
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			power-domains = <&sysc R8A7779_PD_ARM1>;
 		};
 		cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			clock-frequency = <1000000000>;
+			power-domains = <&sysc R8A7779_PD_ARM2>;
 		};
 		cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			clock-frequency = <1000000000>;
+			power-domains = <&sysc R8A7779_PD_ARM3>;
 		};
 	};
 
@@ -67,14 +71,14 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xf0000600 0x20>;
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
 	};
 
 	gpio0: gpio@ffc40000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc40000 0x2c>;
-		interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
@@ -85,7 +89,7 @@
 	gpio1: gpio@ffc41000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc41000 0x2c>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 32 32>;
@@ -96,7 +100,7 @@
 	gpio2: gpio@ffc42000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc42000 0x2c>;
-		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
@@ -107,7 +111,7 @@
 	gpio3: gpio@ffc43000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc43000 0x2c>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
@@ -118,7 +122,7 @@
 	gpio4: gpio@ffc44000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc44000 0x2c>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 32>;
@@ -129,7 +133,7 @@
 	gpio5: gpio@ffc45000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc45000 0x2c>;
-		interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 160 32>;
@@ -140,7 +144,7 @@
 	gpio6: gpio@ffc46000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc46000 0x2c>;
-		interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 192 9>;
@@ -148,7 +152,7 @@
 		interrupt-controller;
 	};
 
-	irqpin0: interrupt-controller@fe780010 {
+	irqpin0: interrupt-controller@fe78001c {
 		compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		status = "disabled";
@@ -157,11 +161,12 @@
 			<0xfe780010 4>,
 			<0xfe780024 4>,
 			<0xfe780044 4>,
-			<0xfe780064 4>;
-		interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
-			      0 28 IRQ_TYPE_LEVEL_HIGH
-			      0 29 IRQ_TYPE_LEVEL_HIGH
-			      0 30 IRQ_TYPE_LEVEL_HIGH>;
+			<0xfe780064 4>,
+			<0xfe780000 4>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		sense-bitfield-width = <2>;
 	};
 
@@ -170,8 +175,9 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc70000 0x1000>;
-		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -180,8 +186,9 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc71000 0x1000>;
-		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -190,8 +197,9 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc72000 0x1000>;
-		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -200,62 +208,81 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc73000 0x1000>;
-		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe40000 0x100>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF0>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe41000 0x100>;
-		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF1>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe42000 0x100>;
-		interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF2>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe43000 0x100>;
-		interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF3>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe44000 0x100>;
-		interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF4>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe45000 0x100>;
-		interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF5>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -272,11 +299,12 @@
 	tmu0: timer@ffd80000 {
 		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
 		reg = <0xffd80000 0x30>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 
 		#renesas,channels = <3>;
 
@@ -286,11 +314,12 @@
 	tmu1: timer@ffd81000 {
 		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
 		reg = <0xffd81000 0x30>;
-		interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 
 		#renesas,channels = <3>;
 
@@ -300,11 +329,12 @@
 	tmu2: timer@ffd82000 {
 		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
 		reg = <0xffd82000 0x30>;
-		interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 
 		#renesas,channels = <3>;
 
@@ -314,77 +344,86 @@
 	sata: sata@fc600000 {
 		compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
 		reg = <0xfc600000 0x2000>;
-		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 	};
 
 	sdhi0: sd@ffe4c000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4c000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi1: sd@ffe4d000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4d000 0x100>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi2: sd@ffe4e000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4e000 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi3: sd@ffe4f000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4f000 0x100>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hspi0: spi@fffc7000 {
 		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hspi1: spi@fffc8000 {
 		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hspi2: spi@fffc6000 {
 		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	du: display@fff80000 {
 		compatible = "renesas,du-r8a7779";
 		reg = <0 0xfff80000 0 0x40000>;
-		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 
 		ports {
@@ -410,12 +449,19 @@
 		ranges;
 
 		/* External root clock */
-		extal_clk: extal_clk {
+		extal_clk: extal {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overriden by the board. */
 			clock-frequency = <0>;
-			clock-output-names = "extal";
+		};
+
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 
 		/* Special CPG clocks */
@@ -426,40 +472,37 @@
 			#clock-cells = <1>;
 			clock-output-names = "plla", "z", "zs", "s",
 					     "s1", "p", "b", "out";
+			#power-domain-cells = <0>;
 		};
 
 		/* Fixed factor clocks */
-		i_clk: i_clk {
+		i_clk: i {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "i";
 		};
-		s3_clk: s3_clk {
+		s3_clk: s3 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "s3";
 		};
-		s4_clk: s4_clk {
+		s4_clk: s4 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
 			#clock-cells = <0>;
 			clock-div = <16>;
 			clock-mult = <1>;
-			clock-output-names = "s4";
 		};
-		g_clk: g_clk {
+		g_clk: g {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
 			#clock-cells = <0>;
 			clock-div = <24>;
 			clock-mult = <1>;
-			clock-output-names = "g";
 		};
 
 		/* Gate clocks */
@@ -546,4 +589,10 @@
 				"mmc1", "mmc0";
 		};
 	};
+
+	sysc: system-controller@ffd85000 {
+		compatible = "renesas,r8a7779-sysc";
+		reg = <0xffd85000 0x0200>;
+		#power-domain-cells = <1>;
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 2eb8a995a..52b56fcad 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2013-2014 Renesas Solutions Corp.
  * Copyright (C) 2014 Cogent Embedded, Inc.
+ * Copyright (C) 2015-2016 Renesas Electronics Corporation
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -47,13 +48,14 @@
 	compatible = "renesas,lager", "renesas,r8a7790";
 
 	aliases {
-		serial0 = &scifa0;
+		serial0 = &scif0;
 		serial1 = &scifa1;
+		i2c8 = "i2cexio";
 	};
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scifa0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -74,31 +76,31 @@
 	keyboard {
 		compatible = "gpio-keys";
 
-		button@1 {
+		one {
 			linux,code = <KEY_1>;
 			label = "SW2-1";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		two {
 			linux,code = <KEY_2>;
 			label = "SW2-2";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		three {
 			linux,code = <KEY_3>;
 			label = "SW2-3";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 		};
-		button@4 {
+		four {
 			linux,code = <KEY_4>;
 			label = "SW2-4";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 		};
@@ -117,7 +119,7 @@
 		};
 	};
 
-	fixedregulator3v3: fixedregulator@0 {
+	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -126,7 +128,7 @@
 		regulator-always-on;
 	};
 
-	vcc_sdhi0: regulator@1 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -137,7 +139,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@2 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -150,7 +152,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi2: regulator@3 {
+	vcc_sdhi2: regulator-vcc-sdhi2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI2 Vcc";
@@ -161,7 +163,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi2: regulator@4 {
+	vccq_sdhi2: regulator-vccq-sdhi2 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI2 VccQ";
@@ -174,7 +176,13 @@
 			  1800000 0>;
 	};
 
-	sound {
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4643: sound {
 		compatible = "simple-audio-card";
 
 		simple-audio-card,format = "left_j";
@@ -187,7 +195,7 @@
 
 		sndcodec: simple-audio-card,codec {
 			sound-dai = <&ak4643>;
-			system-clock-frequency = <11289600>;
+			clocks = <&audio_clock>;
 		};
 	};
 
@@ -245,6 +253,23 @@
 		#clock-cells = <0>;
 		clock-frequency = <148500000>;
 	};
+
+	/*
+	 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
+	 * We use the I2C demuxer, so the desired IP core can be selected at runtime
+	 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
+	 * Note: For testing the I2C slave feature, it is convenient to connect this
+	 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
+	 * instantiate the slave device at runtime according to the documentation.
+	 * You can then communicate with the slave via IIC3.
+	 */
+	i2cexio: i2c-8 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic0>, <&i2c0>;
+		i2c-bus-name = "i2c-exio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
 };
 
 &du {
@@ -284,105 +309,137 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
-		renesas,function = "du";
+		groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
+		function = "du";
 	};
 
-	scifa0_pins: serial0 {
-		renesas,groups = "scifa0_data";
-		renesas,function = "scifa0";
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
 	};
 
 	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
 	};
 
 	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
+		groups = "intc_irq0";
+		function = "intc";
 	};
 
-	scifa1_pins: serial1 {
-		renesas,groups = "scifa1_data";
-		renesas,function = "scifa1";
+	scifa1_pins: scifa1 {
+		groups = "scifa1_data";
+		function = "scifa1";
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
 	};
 
 	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
 	};
 
 	mmc1_pins: mmc1 {
-		renesas,groups = "mmc1_data8", "mmc1_ctrl";
-		renesas,function = "mmc1";
+		groups = "mmc1_data8", "mmc1_ctrl";
+		function = "mmc1";
 	};
 
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
 	};
 
-	msiof1_pins: spi2 {
-		renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
+	msiof1_pins: msiof1 {
+		groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
 				 "msiof1_tx";
-		renesas,function = "msiof1";
+		function = "msiof1";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	iic0_pins: iic0 {
+		groups = "iic0";
+		function = "iic0";
 	};
 
 	iic1_pins: iic1 {
-		renesas,groups = "iic1";
-		renesas,function = "iic1";
+		groups = "iic1";
+		function = "iic1";
 	};
 
 	iic2_pins: iic2 {
-		renesas,groups = "iic2";
-		renesas,function = "iic2";
+		groups = "iic2";
+		function = "iic2";
 	};
 
 	iic3_pins: iic3 {
-		renesas,groups = "iic3";
-		renesas,function = "iic3";
+		groups = "iic3";
+		function = "iic3";
 	};
 
 	hsusb_pins: hsusb {
-		renesas,groups = "usb0_ovc_vbus";
-		renesas,function = "usb0";
+		groups = "usb0_ovc_vbus";
+		function = "usb0";
 	};
 
 	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
+		groups = "usb0";
+		function = "usb0";
 	};
 
 	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
+		groups = "usb1";
+		function = "usb1";
 	};
 
 	usb2_pins: usb2 {
-		renesas,groups = "usb2";
-		renesas,function = "usb2";
+		groups = "usb2";
+		function = "usb2";
 	};
 
-	vin1_pins: vin {
-		renesas,groups = "vin1_data8", "vin1_clk";
-		renesas,function = "vin1";
+	vin1_pins: vin1 {
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
 	};
 
 	sound_pins: sound {
-		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		renesas,function = "ssi";
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
 	};
 
 	sound_clk_pins: sound_clk {
-		renesas,groups = "audio_clk_a";
-		renesas,function = "audio_clk";
+		groups = "audio_clk_a";
+		function = "audio_clk";
 	};
 };
 
@@ -427,8 +484,6 @@
 	status = "okay";
 
 	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
@@ -438,25 +493,31 @@
 		spi-cpol;
 		m25p,fast-read;
 
-		partition@0 {
-			label = "loader";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash";
-			reg = <0x00440000 0x03bc0000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
 		};
 	};
 };
 
-&scifa0 {
-	pinctrl-0 = <&scifa0_pins>;
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
@@ -469,6 +530,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &msiof1 {
 	pinctrl-0 = <&msiof1_pins>;
 	pinctrl-names = "default";
@@ -486,21 +552,25 @@
 
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
 &sdhi2 {
 	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi2>;
 	vqmmc-supply = <&vccq_sdhi2>;
 	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
@@ -508,8 +578,14 @@
 	cpu0-supply = <&vdd_dvfs>;
 };
 
+&i2c0	{
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "i2c-exio";
+};
+
 &iic0	{
-	status = "okay";
+	pinctrl-0 = <&iic0_pins>;
+	pinctrl-names = "i2c-exio";
 };
 
 &iic1	{
@@ -548,7 +624,7 @@
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 51ab8865e..d18558f21 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/clock/r8a7790-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7790-sysc.h>
 
 / {
 	compatible = "renesas,r8a7790";
@@ -43,6 +44,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -52,6 +54,8 @@
 			voltage-tolerance = <1>; /* 1% */
 			clocks = <&cpg_clocks R8A7790_CLK_Z>;
 			clock-latency = <300000>; /* 300 us */
+			power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
 
 			/* kHz - uV - OPPs unknown yet */
 			operating-points = <1400000 1000000>,
@@ -67,6 +71,8 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1300000000>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
 		};
 
 		cpu2: cpu@2 {
@@ -74,6 +80,8 @@
 			compatible = "arm,cortex-a15";
 			reg = <2>;
 			clock-frequency = <1300000000>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
+			next-level-cache = <&L2_CA15>;
 		};
 
 		cpu3: cpu@3 {
@@ -81,39 +89,96 @@
 			compatible = "arm,cortex-a15";
 			reg = <3>;
 			clock-frequency = <1300000000>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
+			next-level-cache = <&L2_CA15>;
 		};
 
-		cpu4: cpu@4 {
+		cpu4: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 			clock-frequency = <780000000>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
 		};
 
-		cpu5: cpu@5 {
+		cpu5: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 			clock-frequency = <780000000>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
 		};
 
-		cpu6: cpu@6 {
+		cpu6: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 			clock-frequency = <780000000>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
+			next-level-cache = <&L2_CA7>;
 		};
 
-		cpu7: cpu@7 {
+		cpu7: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
 			clock-frequency = <780000000>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
+			next-level-cache = <&L2_CA7>;
 		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7790_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA7: cache-controller@100 {
+			compatible = "cache";
+			reg = <0x100>;
+			power-domains = <&sysc R8A7790_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <115000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	apmu@e6151000 {
+		compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+		reg = <0 0xe6151000 0 0x188>;
+		cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+	};
+
+	apmu@e6152000 {
+		compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
 	};
 
 	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
@@ -121,103 +186,114 @@
 			<0 0xf1002000 0 0x1000>,
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	gpio0: gpio@e6050000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6050000 0 0x50>;
-		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 	};
 
 	gpio1: gpio@e6051000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6051000 0 0x50>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
+		gpio-ranges = <&pfc 0 32 30>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 	};
 
 	gpio2: gpio@e6052000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6052000 0 0x50>;
-		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
+		gpio-ranges = <&pfc 0 64 30>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 	};
 
 	gpio3: gpio@e6053000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6053000 0 0x50>;
-		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 	};
 
 	gpio4: gpio@e6054000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6054000 0 0x50>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 	};
 
 	gpio5: gpio@e6055000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6055000 0 0x50>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 160 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7790",
+				"renesas,rcar-gen2-thermal",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	cmt0: timer@ffca0000 {
 		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
 		reg = <0 0xffca0000 0 0x1004>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 
 		renesas,channels-mask = <0x60>;
 
@@ -227,16 +303,17 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 
 		renesas,channels-mask = <0xff>;
 
@@ -248,32 +325,33 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 	};
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
-		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
-			      0 200 IRQ_TYPE_LEVEL_HIGH
-			      0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH
-			      0 205 IRQ_TYPE_LEVEL_HIGH
-			      0 206 IRQ_TYPE_LEVEL_HIGH
-			      0 207 IRQ_TYPE_LEVEL_HIGH
-			      0 208 IRQ_TYPE_LEVEL_HIGH
-			      0 209 IRQ_TYPE_LEVEL_HIGH
-			      0 210 IRQ_TYPE_LEVEL_HIGH
-			      0 211 IRQ_TYPE_LEVEL_HIGH
-			      0 212 IRQ_TYPE_LEVEL_HIGH
-			      0 213 IRQ_TYPE_LEVEL_HIGH
-			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -281,29 +359,30 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
-		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-			      0 216 IRQ_TYPE_LEVEL_HIGH
-			      0 217 IRQ_TYPE_LEVEL_HIGH
-			      0 218 IRQ_TYPE_LEVEL_HIGH
-			      0 219 IRQ_TYPE_LEVEL_HIGH
-			      0 308 IRQ_TYPE_LEVEL_HIGH
-			      0 309 IRQ_TYPE_LEVEL_HIGH
-			      0 310 IRQ_TYPE_LEVEL_HIGH
-			      0 311 IRQ_TYPE_LEVEL_HIGH
-			      0 312 IRQ_TYPE_LEVEL_HIGH
-			      0 313 IRQ_TYPE_LEVEL_HIGH
-			      0 314 IRQ_TYPE_LEVEL_HIGH
-			      0 315 IRQ_TYPE_LEVEL_HIGH
-			      0 316 IRQ_TYPE_LEVEL_HIGH
-			      0 317 IRQ_TYPE_LEVEL_HIGH
-			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -311,27 +390,28 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
 
 	audma0: dma-controller@ec700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xec700000 0 0x10000>;
-		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
-				 0 320 IRQ_TYPE_LEVEL_HIGH
-				 0 321 IRQ_TYPE_LEVEL_HIGH
-				 0 322 IRQ_TYPE_LEVEL_HIGH
-				 0 323 IRQ_TYPE_LEVEL_HIGH
-				 0 324 IRQ_TYPE_LEVEL_HIGH
-				 0 325 IRQ_TYPE_LEVEL_HIGH
-				 0 326 IRQ_TYPE_LEVEL_HIGH
-				 0 327 IRQ_TYPE_LEVEL_HIGH
-				 0 328 IRQ_TYPE_LEVEL_HIGH
-				 0 329 IRQ_TYPE_LEVEL_HIGH
-				 0 330 IRQ_TYPE_LEVEL_HIGH
-				 0 331 IRQ_TYPE_LEVEL_HIGH
-				 0 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =	<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -339,27 +419,28 @@
 				"ch12";
 		clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <13>;
 	};
 
 	audma1: dma-controller@ec720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xec720000 0 0x10000>;
-		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
-				 0 333 IRQ_TYPE_LEVEL_HIGH
-				 0 334 IRQ_TYPE_LEVEL_HIGH
-				 0 335 IRQ_TYPE_LEVEL_HIGH
-				 0 336 IRQ_TYPE_LEVEL_HIGH
-				 0 337 IRQ_TYPE_LEVEL_HIGH
-				 0 338 IRQ_TYPE_LEVEL_HIGH
-				 0 339 IRQ_TYPE_LEVEL_HIGH
-				 0 340 IRQ_TYPE_LEVEL_HIGH
-				 0 341 IRQ_TYPE_LEVEL_HIGH
-				 0 342 IRQ_TYPE_LEVEL_HIGH
-				 0 343 IRQ_TYPE_LEVEL_HIGH
-				 0 344 IRQ_TYPE_LEVEL_HIGH
-				 0 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =	<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -367,28 +448,31 @@
 				"ch12";
 		clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <13>;
 	};
 
 	usb_dmac0: dma-controller@e65a0000 {
-		compatible = "renesas,usb-dmac";
+		compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
 		reg = <0 0xe65a0000 0 0x100>;
-		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
-			      0 109 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <2>;
 	};
 
 	usb_dmac1: dma-controller@e65b0000 {
-		compatible = "renesas,usb-dmac";
+		compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
 		reg = <0 0xe65b0000 0 0x100>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
-			      0 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <2>;
 	};
@@ -398,8 +482,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6508000 0 0x40>;
-		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <110>;
 		status = "disabled";
 	};
 
@@ -408,8 +494,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6518000 0 0x40>;
-		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -418,8 +506,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6530000 0 0x40>;
-		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -428,8 +518,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6540000 0 0x40>;
-		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <110>;
 		status = "disabled";
 	};
 
@@ -438,10 +530,12 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
 		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
-		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+		       <&dmac1 0x61>, <&dmac1 0x62>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -450,10 +544,12 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
 		reg = <0 0xe6510000 0 0x425>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
-		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+		       <&dmac1 0x65>, <&dmac1 0x66>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -462,10 +558,12 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
 		reg = <0 0xe6520000 0 0x425>;
-		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
-		dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+		       <&dmac1 0x69>, <&dmac1 0x6a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -474,20 +572,24 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
 		reg = <0 0xe60b0000 0 0x425>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
-		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+		       <&dmac1 0x77>, <&dmac1 0x78>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	mmcif0: mmc@ee200000 {
 		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
-		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+		       <&dmac1 0xd1>, <&dmac1 0xd2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		reg-io-width = <4>;
 		status = "disabled";
 		max-frequency = <97500000>;
@@ -496,10 +598,12 @@
 	mmcif1: mmc@ee220000 {
 		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
 		reg = <0 0xee220000 0 0x80>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
-		dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+		       <&dmac1 0xe1>, <&dmac1 0xe2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		reg-io-width = <4>;
 		status = "disabled";
 		max-frequency = <97500000>;
@@ -513,191 +617,268 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee100000 0 0x328>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
-		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee120000 0 0x328>;
-		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
-		dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+		       <&dmac1 0xc9>, <&dmac1 0xca>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <195000000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
-		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi3: sd@ee160000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
-		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
+		max-frequency = <97500000>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7790",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+		       <&dmac1 0x21>, <&dmac1 0x22>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7790",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+		       <&dmac1 0x25>, <&dmac1 0x26>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7790",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+		       <&dmac1 0x27>, <&dmac1 0x28>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7790",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7790",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+		       <&dmac1 0x19>, <&dmac1 0x1a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7790",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+		       <&dmac1 0x1d>, <&dmac1 0x1e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+		       <&dmac1 0x29>, <&dmac1 0x2a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+		       <&dmac1 0x2d>, <&dmac1 0x2e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif2: serial@e6e56000 {
+		compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6e56000 0 64>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+		       <&dmac1 0x2b>, <&dmac1 0x2c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7790",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+		       <&dmac1 0x39>, <&dmac1 0x3a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7790",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+		       <&dmac1 0x4d>, <&dmac1 0x4e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	ether: ethernet@ee700000 {
 		compatible = "renesas,ether-r8a7790";
 		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		phy-mode = "rmii";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
 	};
 
+	avb: ethernet@e6800000 {
+		compatible = "renesas,etheravb-r8a7790",
+			     "renesas,etheravb-rcar-gen2";
+		reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	sata0: sata@ee300000 {
 		compatible = "renesas,sata-r8a7790";
 		reg = <0 0xee300000 0 0x2000>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sata1: sata@ee500000 {
 		compatible = "renesas,sata-r8a7790";
 		reg = <0 0xee500000 0 0x2000>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hsusb: usb@e6590000 {
-		compatible = "renesas,usbhs-r8a7790";
+		compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
 		reg = <0 0xe6590000 0 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
-		renesas,buswait = <4>;
-		phys = <&usb0 1>;
-		phy-names = "usb";
 		dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
 		       <&usb_dmac1 0>, <&usb_dmac1 1>;
 		dma-names = "ch0", "ch1", "ch2", "ch3";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
@@ -708,6 +889,7 @@
 		#size-cells = <0>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
 		clock-names = "usbhs";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 
 		usb0: usb-channel@0 {
@@ -722,41 +904,46 @@
 
 	vin0: video@e6ef0000 {
 		compatible = "renesas,vin-r8a7790";
-		clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
 		reg = <0 0xe6ef0000 0 0x1000>;
-		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	vin1: video@e6ef1000 {
 		compatible = "renesas,vin-r8a7790";
-		clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
 		reg = <0 0xe6ef1000 0 0x1000>;
-		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	vin2: video@e6ef2000 {
 		compatible = "renesas,vin-r8a7790";
-		clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
 		reg = <0 0xe6ef2000 0 0x1000>;
-		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	vin3: video@e6ef3000 {
 		compatible = "renesas,vin-r8a7790";
-		clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
 		reg = <0 0xe6ef3000 0 0x1000>;
-		interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	vsp1@fe920000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe920000 0 0x8000>;
-		interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 
 		renesas,has-sru;
 		renesas,#rpf = <5>;
@@ -767,8 +954,9 @@
 	vsp1@fe928000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe928000 0 0x8000>;
-		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 
 		renesas,has-lut;
 		renesas,has-sru;
@@ -780,8 +968,9 @@
 	vsp1@fe930000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe930000 0 0x8000>;
-		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 
 		renesas,has-lif;
 		renesas,has-lut;
@@ -793,8 +982,9 @@
 	vsp1@fe938000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe938000 0 0x8000>;
-		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 
 		renesas,has-lif;
 		renesas,has-lut;
@@ -809,9 +999,9 @@
 		      <0 0xfeb90000 0 0x1c>,
 		      <0 0xfeb94000 0 0x1c>;
 		reg-names = "du", "lvds.0", "lvds.1";
-		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
 			 <&mstp7_clks R8A7790_CLK_DU1>,
 			 <&mstp7_clks R8A7790_CLK_DU2>,
@@ -843,46 +1033,53 @@
 	};
 
 	can0: can@e6e80000 {
-		compatible = "renesas,can-r8a7790";
+		compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can";
 		reg = <0 0xe6e80000 0 0x1000>;
-		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
 			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	can1: can@e6e88000 {
-		compatible = "renesas,can-r8a7790";
+		compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can";
 		reg = <0 0xe6e88000 0 0x1000>;
-		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
 			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
+	jpu: jpeg-codec@fe980000 {
+		compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
+		reg = <0 0xfe980000 0 0x10300>;
+		interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_JPU>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
 		/* External root clock */
-		extal_clk: extal_clk {
+		extal_clk: extal {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overriden by the board. */
 			clock-frequency = <0>;
-			clock-output-names = "extal";
 		};
 
 		/* External PCIe clock - can be overridden by the board */
-		pcie_bus_clk: pcie_bus_clk {
+		pcie_bus_clk: pcie_bus {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <100000000>;
-			clock-output-names = "pcie_bus";
-			status = "disabled";
+			clock-frequency = <0>;
 		};
 
 		/*
@@ -893,27 +1090,31 @@
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "audio_clk_a";
 		};
 		audio_clk_b: audio_clk_b {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "audio_clk_b";
 		};
 		audio_clk_c: audio_clk_c {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "audio_clk_c";
+		};
+
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 
 		/* External USB clock - can be overridden by the board */
-		usb_extal_clk: usb_extal_clk {
+		usb_extal_clk: usb_extal {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <48000000>;
-			clock-output-names = "usb_extal";
 		};
 
 		/* External CAN clock */
@@ -922,8 +1123,6 @@
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
-			clock-output-names = "can_clk";
-			status = "disabled";
 		};
 
 		/* Special CPG clocks */
@@ -936,204 +1135,180 @@
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "sd1",
 					     "z", "rcan", "adsp";
+			#power-domain-cells = <0>;
 		};
 
 		/* Variable factor clocks */
-		sd2_clk: sd2_clk@e6150078 {
+		sd2_clk: sd2@e6150078 {
 			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150078 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd2";
 		};
-		sd3_clk: sd3_clk@e615026c {
+		sd3_clk: sd3@e615026c {
 			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd3";
 		};
-		mmc0_clk: mmc0_clk@e6150240 {
+		mmc0_clk: mmc0@e6150240 {
 			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150240 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "mmc0";
 		};
-		mmc1_clk: mmc1_clk@e6150244 {
+		mmc1_clk: mmc1@e6150244 {
 			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150244 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "mmc1";
 		};
-		ssp_clk: ssp_clk@e6150248 {
+		ssp_clk: ssp@e6150248 {
 			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150248 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "ssp";
 		};
-		ssprs_clk: ssprs_clk@e615024c {
+		ssprs_clk: ssprs@e615024c {
 			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615024c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "ssprs";
 		};
 
 		/* Fixed factor clocks */
-		pll1_div2_clk: pll1_div2_clk {
+		pll1_div2_clk: pll1_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "pll1_div2";
 		};
-		z2_clk: z2_clk {
+		z2_clk: z2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "z2";
 		};
-		zg_clk: zg_clk {
+		zg_clk: zg {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <3>;
 			clock-mult = <1>;
-			clock-output-names = "zg";
 		};
-		zx_clk: zx_clk {
+		zx_clk: zx {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <3>;
 			clock-mult = <1>;
-			clock-output-names = "zx";
 		};
-		zs_clk: zs_clk {
+		zs_clk: zs {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <6>;
 			clock-mult = <1>;
-			clock-output-names = "zs";
 		};
-		hp_clk: hp_clk {
+		hp_clk: hp {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <12>;
 			clock-mult = <1>;
-			clock-output-names = "hp";
 		};
-		i_clk: i_clk {
+		i_clk: i {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "i";
 		};
-		b_clk: b_clk {
+		b_clk: b {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <12>;
 			clock-mult = <1>;
-			clock-output-names = "b";
 		};
-		p_clk: p_clk {
+		p_clk: p {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <24>;
 			clock-mult = <1>;
-			clock-output-names = "p";
 		};
-		cl_clk: cl_clk {
+		cl_clk: cl {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <48>;
 			clock-mult = <1>;
-			clock-output-names = "cl";
 		};
-		m2_clk: m2_clk {
+		m2_clk: m2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "m2";
 		};
-		imp_clk: imp_clk {
+		imp_clk: imp {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <4>;
 			clock-mult = <1>;
-			clock-output-names = "imp";
 		};
-		rclk_clk: rclk_clk {
+		rclk_clk: rclk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <(48 * 1024)>;
 			clock-mult = <1>;
-			clock-output-names = "rclk";
 		};
-		oscclk_clk: oscclk_clk {
+		oscclk_clk: oscclk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <(12 * 1024)>;
 			clock-mult = <1>;
-			clock-output-names = "oscclk";
 		};
-		zb3_clk: zb3_clk {
+		zb3_clk: zb3 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
 			#clock-cells = <0>;
 			clock-div = <4>;
 			clock-mult = <1>;
-			clock-output-names = "zb3";
 		};
-		zb3d2_clk: zb3d2_clk {
+		zb3d2_clk: zb3d2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "zb3d2";
 		};
-		ddr_clk: ddr_clk {
+		ddr_clk: ddr {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "ddr";
 		};
-		mp_clk: mp_clk {
+		mp_clk: mp {
 			compatible = "fixed-factor-clock";
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
 			clock-div = <15>;
 			clock-mult = <1>;
-			clock-output-names = "mp";
 		};
-		cp_clk: cp_clk {
+		cp_clk: cp {
 			compatible = "fixed-factor-clock";
 			clocks = <&extal_clk>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "cp";
 		};
 
 		/* Gate clocks */
@@ -1189,19 +1364,19 @@
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
+			clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&p_clk>, <&sd3_clk>,
 				 <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
 				 <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
 				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
-				R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+				R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SCIF2 R8A7790_CLK_SDHI3
 				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
 				R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
 				R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1
 			>;
 			clock-output-names =
-				"iic2", "tpu0", "mmcif1", "sdhi3",
+				"iic2", "tpu0", "mmcif1", "scif2", "sdhi3",
 				"sdhi2", "sdhi1", "sdhi0", "mmcif0",
 				"iic0", "pciec", "iic1", "ssusb", "cmt1",
 				"usbdmac0", "usbdmac1";
@@ -1249,16 +1424,18 @@
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
 			clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
-			         <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+			         <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2
-				R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+				R8A7790_CLK_VIN1 R8A7790_CLK_VIN0
+				R8A7790_CLK_ETHERAVB R8A7790_CLK_ETHER
 				R8A7790_CLK_SATA1 R8A7790_CLK_SATA0
 			>;
 			clock-output-names =
-				"mlb", "vin3", "vin2", "vin1", "vin0", "ether",
-				"sata1", "sata0";
+				"mlb", "vin3", "vin2", "vin1", "vin0",
+				"etheravb", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1291,6 +1468,7 @@
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>;
 
 			#clock-cells = <1>;
@@ -1300,6 +1478,7 @@
 				R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0
 				R8A7790_CLK_SCU_ALL
 				R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0
+				R8A7790_CLK_SCU_CTU1_MIX1 R8A7790_CLK_SCU_CTU0_MIX0
 				R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5
 				R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0
 			>;
@@ -1309,18 +1488,27 @@
 				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
 				"scu-all",
 				"scu-dvc1", "scu-dvc0",
+				"scu-ctu1-mix1", "scu-ctu0-mix0",
 				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
 				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
 		};
 	};
 
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,r8a7790-sysc";
+		reg = <0 0xe6180000 0 0x0200>;
+		#power-domain-cells = <1>;
+	};
+
 	qspi: spi@e6b10000 {
 		compatible = "renesas,qspi-r8a7790", "renesas,qspi";
 		reg = <0 0xe6b10000 0 0x2c>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1330,10 +1518,12 @@
 	msiof0: spi@e6e20000 {
 		compatible = "renesas,msiof-r8a7790";
 		reg = <0 0xe6e20000 0 0x0064>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
-		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+		       <&dmac1 0x51>, <&dmac1 0x52>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1342,10 +1532,12 @@
 	msiof1: spi@e6e10000 {
 		compatible = "renesas,msiof-r8a7790";
 		reg = <0 0xe6e10000 0 0x0064>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
-		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+		       <&dmac1 0x55>, <&dmac1 0x56>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1354,10 +1546,12 @@
 	msiof2: spi@e6e00000 {
 		compatible = "renesas,msiof-r8a7790";
 		reg = <0 0xe6e00000 0 0x0064>;
-		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
-		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+		       <&dmac1 0x41>, <&dmac1 0x42>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1366,32 +1560,36 @@
 	msiof3: spi@e6c90000 {
 		compatible = "renesas,msiof-r8a7790";
 		reg = <0 0xe6c90000 0 0x0064>;
-		interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
-		dmas = <&dmac0 0x45>, <&dmac0 0x46>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+		       <&dmac1 0x45>, <&dmac1 0x46>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	xhci: usb@ee000000 {
-		compatible = "renesas,xhci-r8a7790";
+		compatible = "renesas,xhci-r8a7790", "renesas,rcar-gen2-xhci";
 		reg = <0 0xee000000 0 0xc00>;
-		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		phys = <&usb2 1>;
 		phy-names = "usb";
 		status = "disabled";
 	};
 
 	pci0: pci@ee090000 {
-		compatible = "renesas,pci-r8a7790";
+		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
 		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
 		reg = <0 0xee090000 0 0xc00>,
 		      <0 0xee080000 0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 
 		bus-range = <0 0>;
@@ -1400,9 +1598,9 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 		usb@0,1 {
 			reg = <0x800 0 0 0 0>;
@@ -1420,12 +1618,13 @@
 	};
 
 	pci1: pci@ee0b0000 {
-		compatible = "renesas,pci-r8a7790";
+		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
 		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
 		reg = <0 0xee0b0000 0 0xc00>,
 		      <0 0xee0a0000 0 0x1100>;
-		interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 
 		bus-range = <1 1>;
@@ -1434,18 +1633,19 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	pci2: pci@ee0d0000 {
-		compatible = "renesas,pci-r8a7790";
+		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
 		device_type = "pci";
 		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		reg = <0 0xee0d0000 0 0xc00>,
 		      <0 0xee0c0000 0 0x1100>;
-		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 
 		bus-range = <2 2>;
@@ -1454,9 +1654,9 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 		usb@0,1 {
 			reg = <0x800 0 0 0 0>;
@@ -1474,7 +1674,7 @@
 	};
 
 	pciec: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7790";
+		compatible = "renesas,pcie-r8a7790", "renesas,pcie-rcar-gen2";
 		reg = <0 0xfe000000 0 0x80000>;
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -1487,14 +1687,15 @@
 		/* Map all possible DDR as inbound ranges */
 		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
 			      0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
-		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
 		clock-names = "pcie", "pcie_bus";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -1509,7 +1710,7 @@
 		reg =	<0 0xec500000 0 0x1000>, /* SCU */
 			<0 0xec5a0000 0 0x100>,  /* ADG */
 			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>, /* SSI */
+			<0 0xec541000 0 0x280>,  /* SSI */
 			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
 		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
@@ -1524,6 +1725,8 @@
 			<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
 			<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
 			<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
+			<&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>,
+			<&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>,
 			<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
 			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
 		clock-names = "ssi-all",
@@ -1531,123 +1734,142 @@
 				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
 				"src.9", "src.8", "src.7", "src.6", "src.5",
 				"src.4", "src.3", "src.2", "src.1", "src.0",
+				"ctu.0", "ctu.1",
+				"mix.0", "mix.1",
 				"dvc.0", "dvc.1",
 				"clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 
 		status = "disabled";
 
 		rcar_sound,dvc {
-			dvc0: dvc@0 {
+			dvc0: dvc-0 {
 				dmas = <&audma0 0xbc>;
 				dma-names = "tx";
 			};
-			dvc1: dvc@1 {
+			dvc1: dvc-1 {
 				dmas = <&audma0 0xbe>;
 				dma-names = "tx";
 			};
 		};
 
+		rcar_sound,mix {
+			mix0: mix-0 { };
+			mix1: mix-1 { };
+		};
+
+		rcar_sound,ctu {
+			ctu00: ctu-0 { };
+			ctu01: ctu-1 { };
+			ctu02: ctu-2 { };
+			ctu03: ctu-3 { };
+			ctu10: ctu-4 { };
+			ctu11: ctu-5 { };
+			ctu12: ctu-6 { };
+			ctu13: ctu-7 { };
+		};
+
 		rcar_sound,src {
-			src0: src@0 {
-				interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
+			src0: src-0 {
+				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x85>, <&audma1 0x9a>;
 				dma-names = "rx", "tx";
 			};
-			src1: src@1 {
-				interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
+			src1: src-1 {
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x87>, <&audma1 0x9c>;
 				dma-names = "rx", "tx";
 			};
-			src2: src@2 {
-				interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
+			src2: src-2 {
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x89>, <&audma1 0x9e>;
 				dma-names = "rx", "tx";
 			};
-			src3: src@3 {
-				interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
+			src3: src-3 {
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 				dma-names = "rx", "tx";
 			};
-			src4: src@4 {
-				interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
+			src4: src-4 {
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 				dma-names = "rx", "tx";
 			};
-			src5: src@5 {
-				interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
+			src5: src-5 {
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 				dma-names = "rx", "tx";
 			};
-			src6: src@6 {
-				interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
+			src6: src-6 {
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x91>, <&audma1 0xb4>;
 				dma-names = "rx", "tx";
 			};
-			src7: src@7 {
-				interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
+			src7: src-7 {
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x93>, <&audma1 0xb6>;
 				dma-names = "rx", "tx";
 			};
-			src8: src@8 {
-				interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
+			src8: src-8 {
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x95>, <&audma1 0xb8>;
 				dma-names = "rx", "tx";
 			};
-			src9: src@9 {
-				interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
+			src9: src-9 {
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x97>, <&audma1 0xba>;
 				dma-names = "rx", "tx";
 			};
 		};
 
 		rcar_sound,ssi {
-			ssi0: ssi@0 {
-				interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+			ssi0: ssi-0 {
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi1: ssi@1 {
-				 interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+			ssi1: ssi-1 {
+				 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi2: ssi@2 {
-				interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+			ssi2: ssi-2 {
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi3: ssi@3 {
-				interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+			ssi3: ssi-3 {
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi4: ssi@4 {
-				interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+			ssi4: ssi-4 {
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi5: ssi@5 {
-				interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+			ssi5: ssi-5 {
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi6: ssi@6 {
-				interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+			ssi6: ssi-6 {
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi7: ssi@7 {
-				interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+			ssi7: ssi-7 {
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi8: ssi@8 {
-				interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+			ssi8: ssi-8 {
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi9: ssi@9 {
-				interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+			ssi9: ssi-9 {
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
@@ -1655,52 +1877,52 @@
 	};
 
 	ipmmu_sy0: mmu@e6280000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6280000 0 0x1000>;
-		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_sy1: mmu@e6290000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6290000 0 0x1000>;
-		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_ds: mmu@e6740000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6740000 0 0x1000>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mp: mmu@ec680000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xec680000 0 0x1000>;
-		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mx: mmu@fe951000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xfe951000 0 0x1000>;
-		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_rt: mmu@ffc80000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xffc80000 0 0x1000>;
-		interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
deleted file mode 100644
index 655d1804e..000000000
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Device Tree Source for the Henninger board
- *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Henninger";
-	compatible = "renesas,henninger", "renesas,r8a7791";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	vcc_sdhi0: regulator@0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi0: regulator@1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi2: regulator@2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi2: regulator@3 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	i2c2_pins: i2c2 {
-		renesas,groups = "i2c2";
-		renesas,function = "i2c2";
-	};
-
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
-	};
-
-	msiof0_pins: spi1 {
-		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
-				 "msiof0_tx";
-		renesas,function = "msiof0";
-	};
-
-	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
-	};
-
-	vin0_pins: vin0 {
-		renesas,groups = "vin0_data8", "vin0_clk";
-		renesas,function = "vin0";
-	};
-
-	can0_pins: can0 {
-		renesas,groups = "can0_data";
-		renesas,function = "can0";
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	composite-in@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
-		remote = <&vin0>;
-
-		port {
-			adv7180: endpoint {
-				bus-width = <8>;
-				remote-endpoint = <&vin0ep>;
-			};
-		};
-	};
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "loader_prg";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user_prg";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash_fs";
-			reg = <0x00440000 0x03bc0000>;
-		};
-	};
-};
-
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&hsusb {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&pcie_bus_clk {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
-
-/* composite video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vin0ep: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
-		};
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index cffe33ff4..f8a7d090f 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -54,7 +54,7 @@
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -79,77 +79,77 @@
 			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_1>;
 			label = "SW2-1";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-2 {
 			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_2>;
 			label = "SW2-2";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-3 {
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_3>;
 			label = "SW2-3";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-4 {
 			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_4>;
 			label = "SW2-4";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-a {
 			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_A>;
 			label = "SW30";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-b {
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_B>;
 			label = "SW31";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-c {
 			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_C>;
 			label = "SW32";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-d {
 			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_D>;
 			label = "SW33";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-e {
 			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_E>;
 			label = "SW34";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-f {
 			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_F>;
 			label = "SW35";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-g {
 			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_G>;
 			label = "SW36";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 	};
@@ -170,7 +170,7 @@
 		};
 	};
 
-	vcc_sdhi0: regulator@0 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -181,7 +181,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@1 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -194,7 +194,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi1: regulator@2 {
+	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI1 Vcc";
@@ -205,7 +205,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi1: regulator@3 {
+	vccq_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI1 VccQ";
@@ -218,7 +218,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi2: regulator@4 {
+	vcc_sdhi2: regulator-vcc-sdhi2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI2 Vcc";
@@ -229,7 +229,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi2: regulator@5 {
+	vccq_sdhi2: regulator-vccq-sdhi2 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI2 VccQ";
@@ -242,7 +242,13 @@
 			  1800000 0>;
 	};
 
-	sound {
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4643: sound {
 		compatible = "simple-audio-card";
 
 		simple-audio-card,format = "left_j";
@@ -255,7 +261,7 @@
 
 		sndcodec: simple-audio-card,codec {
 			sound-dai = <&ak4643>;
-			system-clock-frequency = <11289600>;
+			clocks = <&audio_clock>;
 		};
 	};
 
@@ -313,85 +319,93 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	i2c2_pins: i2c2 {
-		renesas,groups = "i2c2";
-		renesas,function = "i2c2";
+		groups = "i2c2";
+		function = "i2c2";
 	};
 
 	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0";
-		renesas,function = "du";
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
 	};
 
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
+	scif1_pins: scif1 {
+		groups = "scif1_data_d";
+		function = "scif1";
 	};
 
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data_d";
-		renesas,function = "scif1";
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
 	};
 
 	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
 	};
 
 	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
+		groups = "intc_irq0";
+		function = "intc";
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
 	};
 
 	sdhi1_pins: sd1 {
-		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
-		renesas,function = "sdhi1";
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
 	};
 
 	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
 	};
 
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
 	};
 
-	msiof0_pins: spi1 {
-		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+	msiof0_pins: msiof0 {
+		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 				 "msiof0_tx";
-		renesas,function = "msiof0";
+		function = "msiof0";
 	};
 
 	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
+		groups = "usb0";
+		function = "usb0";
 	};
 
 	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
+		groups = "usb1";
+		function = "usb1";
 	};
 
 	vin1_pins: vin1 {
-		renesas,groups = "vin1_data8", "vin1_clk";
-		renesas,function = "vin1";
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
 	};
 
 	sound_pins: sound {
-		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		renesas,function = "ssi";
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
 	};
 
 	sound_clk_pins: sound_clk {
-		renesas,groups = "audio_clk_a";
-		renesas,function = "audio_clk";
+		groups = "audio_clk_a";
+		function = "audio_clk";
 	};
 };
 
@@ -433,6 +447,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
@@ -472,8 +491,6 @@
 	status = "okay";
 
 	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
@@ -483,19 +500,25 @@
 		spi-cpol;
 		m25p,fast-read;
 
-		partition@0 {
-			label = "loader";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-		partition@80000 {
-			label = "user";
-			reg = <0x00080000 0x00580000>;
-			read-only;
-		};
-		partition@600000 {
-			label = "flash";
-			reg = <0x00600000 0x03a00000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "user";
+				reg = <0x00080000 0x00580000>;
+				read-only;
+			};
+			partition@600000 {
+				label = "flash";
+				reg = <0x00600000 0x03a00000>;
+			};
 		};
 	};
 };
@@ -637,6 +660,7 @@
 };
 
 &pcie_bus_clk {
+	clock-frequency = <100000000>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
new file mode 100644
index 000000000..6761d11d3
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -0,0 +1,457 @@
+/*
+ * Device Tree Source for the Porter board
+ *
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4642
+ *
+ * JP3: 2-1: AK4642
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Porter";
+	compatible = "renesas,porter", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x16_clk: x16-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x14_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4642>;
+			clocks = <&x14_clk>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "ok";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader_prg";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user_prg";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash_fs";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ak4642: codec@12 {
+		compatible = "asahi-kasei,ak4642";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+/* composite video input */
+&vin0 {
+	status = "ok";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&pci0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pci1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&hsusb {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+		 <&mstp7_clks R8A7791_CLK_DU1>,
+		 <&mstp7_clks R8A7791_CLK_LVDS0>,
+		 <&x3_clk>, <&x16_clk>;
+	clock-names = "du.0", "du.1", "lvds.0",
+		      "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index dc1cd3f16..8f0086bbd 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/clock/r8a7791-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7791-sysc.h>
 
 / {
 	compatible = "renesas,r8a7791";
@@ -42,6 +43,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -51,6 +53,8 @@
 			voltage-tolerance = <1>; /* 1% */
 			clocks = <&cpg_clocks R8A7791_CLK_Z>;
 			clock-latency = <300000>; /* 300 us */
+			power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
 
 			/* kHz - uV - OPPs unknown yet */
 			operating-points = <1500000 1000000>,
@@ -66,11 +70,46 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1500000000>;
+			power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7791_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <115000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	apmu@e6152000 {
+		compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1>;
+	};
+
 	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
@@ -78,127 +117,140 @@
 			<0 0xf1002000 0 0x1000>,
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	gpio0: gpio@e6050000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6050000 0 0x50>;
-		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 	};
 
 	gpio1: gpio@e6051000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6051000 0 0x50>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
+		gpio-ranges = <&pfc 0 32 26>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 	};
 
 	gpio2: gpio@e6052000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6052000 0 0x50>;
-		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 	};
 
 	gpio3: gpio@e6053000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6053000 0 0x50>;
-		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 	};
 
 	gpio4: gpio@e6054000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6054000 0 0x50>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 	};
 
 	gpio5: gpio@e6055000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6055000 0 0x50>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 160 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 	};
 
 	gpio6: gpio@e6055400 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6055400 0 0x50>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 192 32>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 	};
 
 	gpio7: gpio@e6055800 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6055800 0 0x50>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 224 26>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7791",
+				"renesas,rcar-gen2-thermal",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	cmt0: timer@ffca0000 {
 		compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
 		reg = <0 0xffca0000 0 0x1004>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 
 		renesas,channels-mask = <0x60>;
 
@@ -208,16 +260,17 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 
 		renesas,channels-mask = <0xff>;
 
@@ -229,38 +282,39 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 	};
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
-		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
-			      0 200 IRQ_TYPE_LEVEL_HIGH
-			      0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH
-			      0 205 IRQ_TYPE_LEVEL_HIGH
-			      0 206 IRQ_TYPE_LEVEL_HIGH
-			      0 207 IRQ_TYPE_LEVEL_HIGH
-			      0 208 IRQ_TYPE_LEVEL_HIGH
-			      0 209 IRQ_TYPE_LEVEL_HIGH
-			      0 210 IRQ_TYPE_LEVEL_HIGH
-			      0 211 IRQ_TYPE_LEVEL_HIGH
-			      0 212 IRQ_TYPE_LEVEL_HIGH
-			      0 213 IRQ_TYPE_LEVEL_HIGH
-			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -268,29 +322,30 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
-		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-			      0 216 IRQ_TYPE_LEVEL_HIGH
-			      0 217 IRQ_TYPE_LEVEL_HIGH
-			      0 218 IRQ_TYPE_LEVEL_HIGH
-			      0 219 IRQ_TYPE_LEVEL_HIGH
-			      0 308 IRQ_TYPE_LEVEL_HIGH
-			      0 309 IRQ_TYPE_LEVEL_HIGH
-			      0 310 IRQ_TYPE_LEVEL_HIGH
-			      0 311 IRQ_TYPE_LEVEL_HIGH
-			      0 312 IRQ_TYPE_LEVEL_HIGH
-			      0 313 IRQ_TYPE_LEVEL_HIGH
-			      0 314 IRQ_TYPE_LEVEL_HIGH
-			      0 315 IRQ_TYPE_LEVEL_HIGH
-			      0 316 IRQ_TYPE_LEVEL_HIGH
-			      0 317 IRQ_TYPE_LEVEL_HIGH
-			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -298,27 +353,28 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
 
 	audma0: dma-controller@ec700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xec700000 0 0x10000>;
-		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
-				 0 320 IRQ_TYPE_LEVEL_HIGH
-				 0 321 IRQ_TYPE_LEVEL_HIGH
-				 0 322 IRQ_TYPE_LEVEL_HIGH
-				 0 323 IRQ_TYPE_LEVEL_HIGH
-				 0 324 IRQ_TYPE_LEVEL_HIGH
-				 0 325 IRQ_TYPE_LEVEL_HIGH
-				 0 326 IRQ_TYPE_LEVEL_HIGH
-				 0 327 IRQ_TYPE_LEVEL_HIGH
-				 0 328 IRQ_TYPE_LEVEL_HIGH
-				 0 329 IRQ_TYPE_LEVEL_HIGH
-				 0 330 IRQ_TYPE_LEVEL_HIGH
-				 0 331 IRQ_TYPE_LEVEL_HIGH
-				 0 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =	<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -326,27 +382,28 @@
 				"ch12";
 		clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <13>;
 	};
 
 	audma1: dma-controller@ec720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xec720000 0 0x10000>;
-		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
-				 0 333 IRQ_TYPE_LEVEL_HIGH
-				 0 334 IRQ_TYPE_LEVEL_HIGH
-				 0 335 IRQ_TYPE_LEVEL_HIGH
-				 0 336 IRQ_TYPE_LEVEL_HIGH
-				 0 337 IRQ_TYPE_LEVEL_HIGH
-				 0 338 IRQ_TYPE_LEVEL_HIGH
-				 0 339 IRQ_TYPE_LEVEL_HIGH
-				 0 340 IRQ_TYPE_LEVEL_HIGH
-				 0 341 IRQ_TYPE_LEVEL_HIGH
-				 0 342 IRQ_TYPE_LEVEL_HIGH
-				 0 343 IRQ_TYPE_LEVEL_HIGH
-				 0 344 IRQ_TYPE_LEVEL_HIGH
-				 0 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =	<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -354,28 +411,31 @@
 				"ch12";
 		clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <13>;
 	};
 
 	usb_dmac0: dma-controller@e65a0000 {
-		compatible = "renesas,usb-dmac";
+		compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
 		reg = <0 0xe65a0000 0 0x100>;
-		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
-			      0 109 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <2>;
 	};
 
 	usb_dmac1: dma-controller@e65b0000 {
-		compatible = "renesas,usb-dmac";
+		compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
 		reg = <0 0xe65b0000 0 0x100>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
-			      0 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <2>;
 	};
@@ -386,8 +446,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6508000 0 0x40>;
-		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -396,8 +458,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6518000 0 0x40>;
-		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -406,8 +470,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6530000 0 0x40>;
-		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -416,8 +482,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6540000 0 0x40>;
-		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -426,8 +494,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6520000 0 0x40>;
-		interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -437,8 +507,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6528000 0 0x40>;
-		interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <110>;
 		status = "disabled";
 	};
 
@@ -448,10 +520,12 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
 		reg = <0 0xe60b0000 0 0x425>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
-		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+		       <&dmac1 0x77>, <&dmac1 0x78>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -460,10 +534,12 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
 		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
-		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+		       <&dmac1 0x61>, <&dmac1 0x62>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -472,26 +548,29 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
 		reg = <0 0xe6510000 0 0x425>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
-		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+		       <&dmac1 0x65>, <&dmac1 0x66>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	pfc: pfc@e6060000 {
 		compatible = "renesas,pfc-r8a7791";
 		reg = <0 0xe6060000 0 0x250>;
-		#gpio-range-cells = <3>;
 	};
 
 	mmcif0: mmc@ee200000 {
 		compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
-		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+		       <&dmac1 0xd1>, <&dmac1 0xd2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		reg-io-width = <4>;
 		status = "disabled";
 		max-frequency = <97500000>;
@@ -500,269 +579,354 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7791";
 		reg = <0 0xee100000 0 0x328>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
-		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi1: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a7791";
 		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
-		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi2: sd@ee160000 {
 		compatible = "renesas,sdhi-r8a7791";
 		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
-		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+		       <&dmac1 0x21>, <&dmac1 0x22>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+		       <&dmac1 0x25>, <&dmac1 0x26>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+		       <&dmac1 0x27>, <&dmac1 0x28>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c70000 0 64>;
-		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+		       <&dmac1 0x1b>, <&dmac1 0x1c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa4: serial@e6c78000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c78000 0 64>;
-		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+		       <&dmac1 0x1f>, <&dmac1 0x20>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa5: serial@e6c80000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c80000 0 64>;
-		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+		       <&dmac1 0x23>, <&dmac1 0x24>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7791",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7791",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+		       <&dmac1 0x19>, <&dmac1 0x1a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7791",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+		       <&dmac1 0x1d>, <&dmac1 0x1e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+		       <&dmac1 0x29>, <&dmac1 0x2a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+		       <&dmac1 0x2d>, <&dmac1 0x2e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif2: serial@e6e58000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e58000 0 64>;
-		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+		       <&dmac1 0x2b>, <&dmac1 0x2c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif3: serial@e6ea8000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ea8000 0 64>;
-		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+		       <&dmac1 0x2f>, <&dmac1 0x30>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif4: serial@e6ee0000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ee0000 0 64>;
-		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+		       <&dmac1 0xfb>, <&dmac1 0xfc>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif5: serial@e6ee8000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ee8000 0 64>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+		       <&dmac1 0xfd>, <&dmac1 0xfe>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7791",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+		       <&dmac1 0x39>, <&dmac1 0x3a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7791",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+		       <&dmac1 0x4d>, <&dmac1 0x4e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hscif2: serial@e62d0000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7791",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62d0000 0 96>;
-		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+		       <&dmac1 0x3b>, <&dmac1 0x3c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	ether: ethernet@ee700000 {
 		compatible = "renesas,ether-r8a7791";
 		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		phy-mode = "rmii";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
 	};
 
+	avb: ethernet@e6800000 {
+		compatible = "renesas,etheravb-r8a7791",
+			     "renesas,etheravb-rcar-gen2";
+		reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	sata0: sata@ee300000 {
 		compatible = "renesas,sata-r8a7791";
 		reg = <0 0xee300000 0 0x2000>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sata1: sata@ee500000 {
 		compatible = "renesas,sata-r8a7791";
 		reg = <0 0xee500000 0 0x2000>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hsusb: usb@e6590000 {
-		compatible = "renesas,usbhs-r8a7791";
+		compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs";
 		reg = <0 0xe6590000 0 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
-		renesas,buswait = <4>;
-		phys = <&usb0 1>;
-		phy-names = "usb";
 		dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
 		       <&usb_dmac1 0>, <&usb_dmac1 1>;
 		dma-names = "ch0", "ch1", "ch2", "ch3";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
@@ -773,6 +937,7 @@
 		#size-cells = <0>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
 		clock-names = "usbhs";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 
 		usb0: usb-channel@0 {
@@ -787,33 +952,37 @@
 
 	vin0: video@e6ef0000 {
 		compatible = "renesas,vin-r8a7791";
-		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
 		reg = <0 0xe6ef0000 0 0x1000>;
-		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	vin1: video@e6ef1000 {
 		compatible = "renesas,vin-r8a7791";
-		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
 		reg = <0 0xe6ef1000 0 0x1000>;
-		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	vin2: video@e6ef2000 {
 		compatible = "renesas,vin-r8a7791";
-		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
 		reg = <0 0xe6ef2000 0 0x1000>;
-		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	vsp1@fe928000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe928000 0 0x8000>;
-		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 
 		renesas,has-lut;
 		renesas,has-sru;
@@ -825,8 +994,9 @@
 	vsp1@fe930000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe930000 0 0x8000>;
-		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 
 		renesas,has-lif;
 		renesas,has-lut;
@@ -838,8 +1008,9 @@
 	vsp1@fe938000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe938000 0 0x8000>;
-		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 
 		renesas,has-lif;
 		renesas,has-lut;
@@ -853,8 +1024,8 @@
 		reg = <0 0xfeb00000 0 0x40000>,
 		      <0 0xfeb90000 0 0x1c>;
 		reg-names = "du", "lvds.0";
-		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 268 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_DU0>,
 			 <&mstp7_clks R8A7791_CLK_DU1>,
 			 <&mstp7_clks R8A7791_CLK_LVDS0>;
@@ -879,37 +1050,46 @@
 	};
 
 	can0: can@e6e80000 {
-		compatible = "renesas,can-r8a7791";
+		compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
 		reg = <0 0xe6e80000 0 0x1000>;
-		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
 			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	can1: can@e6e88000 {
-		compatible = "renesas,can-r8a7791";
+		compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
 		reg = <0 0xe6e88000 0 0x1000>;
-		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
 			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
+	jpu: jpeg-codec@fe980000 {
+		compatible = "renesas,jpu-r8a7791", "renesas,rcar-gen2-jpu";
+		reg = <0 0xfe980000 0 0x10300>;
+		interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_JPU>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
 		/* External root clock */
-		extal_clk: extal_clk {
+		extal_clk: extal {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overriden by the board. */
 			clock-frequency = <0>;
-			clock-output-names = "extal";
 		};
 
 		/*
@@ -920,36 +1100,38 @@
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "audio_clk_a";
 		};
 		audio_clk_b: audio_clk_b {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "audio_clk_b";
 		};
 		audio_clk_c: audio_clk_c {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "audio_clk_c";
 		};
 
 		/* External PCIe clock - can be overridden by the board */
-		pcie_bus_clk: pcie_bus_clk {
+		pcie_bus_clk: pcie_bus {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <100000000>;
-			clock-output-names = "pcie_bus";
-			status = "disabled";
+			clock-frequency = <0>;
+		};
+
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 
 		/* External USB clock - can be overridden by the board */
-		usb_extal_clk: usb_extal_clk {
+		usb_extal_clk: usb_extal {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <48000000>;
-			clock-output-names = "usb_extal";
 		};
 
 		/* External CAN clock */
@@ -958,8 +1140,6 @@
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
-			clock-output-names = "can_clk";
-			status = "disabled";
 		};
 
 		/* Special CPG clocks */
@@ -972,189 +1152,160 @@
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "z",
 					     "rcan", "adsp";
+			#power-domain-cells = <0>;
 		};
 
 		/* Variable factor clocks */
-		sd2_clk: sd2_clk@e6150078 {
+		sd2_clk: sd2@e6150078 {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150078 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd2";
 		};
-		sd3_clk: sd3_clk@e615026c {
+		sd3_clk: sd3@e615026c {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd3";
 		};
-		mmc0_clk: mmc0_clk@e6150240 {
+		mmc0_clk: mmc0@e6150240 {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150240 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "mmc0";
 		};
-		ssp_clk: ssp_clk@e6150248 {
+		ssp_clk: ssp@e6150248 {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150248 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "ssp";
 		};
-		ssprs_clk: ssprs_clk@e615024c {
+		ssprs_clk: ssprs@e615024c {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615024c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "ssprs";
 		};
 
 		/* Fixed factor clocks */
-		pll1_div2_clk: pll1_div2_clk {
+		pll1_div2_clk: pll1_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "pll1_div2";
 		};
-		zg_clk: zg_clk {
+		zg_clk: zg {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <3>;
 			clock-mult = <1>;
-			clock-output-names = "zg";
 		};
-		zx_clk: zx_clk {
+		zx_clk: zx {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <3>;
 			clock-mult = <1>;
-			clock-output-names = "zx";
 		};
-		zs_clk: zs_clk {
+		zs_clk: zs {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <6>;
 			clock-mult = <1>;
-			clock-output-names = "zs";
 		};
-		hp_clk: hp_clk {
+		hp_clk: hp {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <12>;
 			clock-mult = <1>;
-			clock-output-names = "hp";
 		};
-		i_clk: i_clk {
+		i_clk: i {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "i";
 		};
-		b_clk: b_clk {
+		b_clk: b {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <12>;
 			clock-mult = <1>;
-			clock-output-names = "b";
 		};
-		p_clk: p_clk {
+		p_clk: p {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <24>;
 			clock-mult = <1>;
-			clock-output-names = "p";
 		};
-		cl_clk: cl_clk {
+		cl_clk: cl {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <48>;
 			clock-mult = <1>;
-			clock-output-names = "cl";
 		};
-		m2_clk: m2_clk {
+		m2_clk: m2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "m2";
 		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
-		rclk_clk: rclk_clk {
+		rclk_clk: rclk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <(48 * 1024)>;
 			clock-mult = <1>;
-			clock-output-names = "rclk";
 		};
-		oscclk_clk: oscclk_clk {
+		oscclk_clk: oscclk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <(12 * 1024)>;
 			clock-mult = <1>;
-			clock-output-names = "oscclk";
 		};
-		zb3_clk: zb3_clk {
+		zb3_clk: zb3 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
 			#clock-cells = <0>;
 			clock-div = <4>;
 			clock-mult = <1>;
-			clock-output-names = "zb3";
 		};
-		zb3d2_clk: zb3d2_clk {
+		zb3d2_clk: zb3d2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "zb3d2";
 		};
-		ddr_clk: ddr_clk {
+		ddr_clk: ddr {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "ddr";
 		};
-		mp_clk: mp_clk {
+		mp_clk: mp {
 			compatible = "fixed-factor-clock";
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
 			clock-div = <15>;
 			clock-mult = <1>;
-			clock-output-names = "mp";
 		};
-		cp_clk: cp_clk {
+		cp_clk: cp {
 			compatible = "fixed-factor-clock";
 			clocks = <&extal_clk>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "cp";
 		};
 
 		/* Gate clocks */
@@ -1267,16 +1418,18 @@
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
 			clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>,
-			         <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+			         <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB
 				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
-				R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
+				R8A7791_CLK_ETHERAVB R8A7791_CLK_ETHER
+				R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
 			>;
 			clock-output-names =
-				"ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", "ether",
-				"sata1", "sata0";
+				"ipmmu_sgx", "mlb", "vin2", "vin1", "vin0",
+				"etheravb", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1311,6 +1464,7 @@
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>;
 
 			#clock-cells = <1>;
@@ -1320,6 +1474,7 @@
 				R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0
 				R8A7791_CLK_SCU_ALL
 				R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0
+				R8A7791_CLK_SCU_CTU1_MIX1 R8A7791_CLK_SCU_CTU0_MIX0
 				R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5
 				R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0
 			>;
@@ -1329,6 +1484,7 @@
 				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
 				"scu-all",
 				"scu-dvc1", "scu-dvc0",
+				"scu-ctu1-mix1", "scu-ctu0-mix0",
 				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
 				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
 		};
@@ -1344,13 +1500,21 @@
 		};
 	};
 
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,r8a7791-sysc";
+		reg = <0 0xe6180000 0 0x0200>;
+		#power-domain-cells = <1>;
+	};
+
 	qspi: spi@e6b10000 {
 		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
 		reg = <0 0xe6b10000 0 0x2c>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1360,10 +1524,12 @@
 	msiof0: spi@e6e20000 {
 		compatible = "renesas,msiof-r8a7791";
 		reg = <0 0xe6e20000 0 0x0064>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
-		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+		       <&dmac1 0x51>, <&dmac1 0x52>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1372,10 +1538,12 @@
 	msiof1: spi@e6e10000 {
 		compatible = "renesas,msiof-r8a7791";
 		reg = <0 0xe6e10000 0 0x0064>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
-		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+		       <&dmac1 0x55>, <&dmac1 0x56>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -1384,32 +1552,36 @@
 	msiof2: spi@e6e00000 {
 		compatible = "renesas,msiof-r8a7791";
 		reg = <0 0xe6e00000 0 0x0064>;
-		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
-		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+		       <&dmac1 0x41>, <&dmac1 0x42>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	xhci: usb@ee000000 {
-		compatible = "renesas,xhci-r8a7791";
+		compatible = "renesas,xhci-r8a7791", "renesas,rcar-gen2-xhci";
 		reg = <0 0xee000000 0 0xc00>;
-		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		phys = <&usb2 1>;
 		phy-names = "usb";
 		status = "disabled";
 	};
 
 	pci0: pci@ee090000 {
-		compatible = "renesas,pci-r8a7791";
+		compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2";
 		device_type = "pci";
-		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
 		reg = <0 0xee090000 0 0xc00>,
 		      <0 0xee080000 0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 
 		bus-range = <0 0>;
@@ -1418,9 +1590,9 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 		usb@0,1 {
 			reg = <0x800 0 0 0 0>;
@@ -1438,12 +1610,13 @@
 	};
 
 	pci1: pci@ee0d0000 {
-		compatible = "renesas,pci-r8a7791";
+		compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2";
 		device_type = "pci";
-		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
 		reg = <0 0xee0d0000 0 0xc00>,
 		      <0 0xee0c0000 0 0x1100>;
-		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 
 		bus-range = <1 1>;
@@ -1452,9 +1625,9 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 		usb@0,1 {
 			reg = <0x800 0 0 0 0>;
@@ -1472,7 +1645,7 @@
 	};
 
 	pciec: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7791";
+		compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
 		reg = <0 0xfe000000 0 0x80000>;
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -1485,73 +1658,74 @@
 		/* Map all possible DDR as inbound ranges */
 		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
 			      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
-		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
 		clock-names = "pcie", "pcie_bus";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	ipmmu_sy0: mmu@e6280000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6280000 0 0x1000>;
-		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_sy1: mmu@e6290000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6290000 0 0x1000>;
-		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_ds: mmu@e6740000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6740000 0 0x1000>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mp: mmu@ec680000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xec680000 0 0x1000>;
-		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mx: mmu@fe951000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xfe951000 0 0x1000>;
-		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_rt: mmu@ffc80000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xffc80000 0 0x1000>;
-		interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_gp: mmu@e62a0000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xe62a0000 0 0x1000>;
-		interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 261 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
@@ -1567,7 +1741,7 @@
 		reg =	<0 0xec500000 0 0x1000>, /* SCU */
 			<0 0xec5a0000 0 0x100>,  /* ADG */
 			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>, /* SSI */
+			<0 0xec541000 0 0x280>,  /* SSI */
 			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
 		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
@@ -1582,6 +1756,8 @@
 			<&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>,
 			<&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>,
 			<&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>,
+			<&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>,
+			<&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>,
 			<&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>,
 			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
 		clock-names = "ssi-all",
@@ -1589,123 +1765,142 @@
 				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
 				"src.9", "src.8", "src.7", "src.6", "src.5",
 				"src.4", "src.3", "src.2", "src.1", "src.0",
+				"ctu.0", "ctu.1",
+				"mix.0", "mix.1",
 				"dvc.0", "dvc.1",
 				"clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 
 		status = "disabled";
 
 		rcar_sound,dvc {
-			dvc0: dvc@0 {
+			dvc0: dvc-0 {
 				dmas = <&audma0 0xbc>;
 				dma-names = "tx";
 			};
-			dvc1: dvc@1 {
+			dvc1: dvc-1 {
 				dmas = <&audma0 0xbe>;
 				dma-names = "tx";
 			};
 		};
 
+		rcar_sound,mix {
+			mix0: mix-0 { };
+			mix1: mix-1 { };
+		};
+
+		rcar_sound,ctu {
+			ctu00: ctu-0 { };
+			ctu01: ctu-1 { };
+			ctu02: ctu-2 { };
+			ctu03: ctu-3 { };
+			ctu10: ctu-4 { };
+			ctu11: ctu-5 { };
+			ctu12: ctu-6 { };
+			ctu13: ctu-7 { };
+		};
+
 		rcar_sound,src {
-			src0: src@0 {
-				interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
+			src0: src-0 {
+				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x85>, <&audma1 0x9a>;
 				dma-names = "rx", "tx";
 			};
-			src1: src@1 {
-				interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
+			src1: src-1 {
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x87>, <&audma1 0x9c>;
 				dma-names = "rx", "tx";
 			};
-			src2: src@2 {
-				interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
+			src2: src-2 {
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x89>, <&audma1 0x9e>;
 				dma-names = "rx", "tx";
 			};
-			src3: src@3 {
-				interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
+			src3: src-3 {
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 				dma-names = "rx", "tx";
 			};
-			src4: src@4 {
-				interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
+			src4: src-4 {
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 				dma-names = "rx", "tx";
 			};
-			src5: src@5 {
-				interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
+			src5: src-5 {
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 				dma-names = "rx", "tx";
 			};
-			src6: src@6 {
-				interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
+			src6: src-6 {
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x91>, <&audma1 0xb4>;
 				dma-names = "rx", "tx";
 			};
-			src7: src@7 {
-				interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
+			src7: src-7 {
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x93>, <&audma1 0xb6>;
 				dma-names = "rx", "tx";
 			};
-			src8: src@8 {
-				interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
+			src8: src-8 {
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x95>, <&audma1 0xb8>;
 				dma-names = "rx", "tx";
 			};
-			src9: src@9 {
-				interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
+			src9: src-9 {
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x97>, <&audma1 0xba>;
 				dma-names = "rx", "tx";
 			};
 		};
 
 		rcar_sound,ssi {
-			ssi0: ssi@0 {
-				interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+			ssi0: ssi-0 {
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi1: ssi@1 {
-				 interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+			ssi1: ssi-1 {
+				 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi2: ssi@2 {
-				interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+			ssi2: ssi-2 {
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi3: ssi@3 {
-				interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+			ssi3: ssi-3 {
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi4: ssi@4 {
-				interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+			ssi4: ssi-4 {
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi5: ssi@5 {
-				interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+			ssi5: ssi-5 {
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi6: ssi@6 {
-				interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+			ssi6: ssi-6 {
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi7: ssi@7 {
-				interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+			ssi7: ssi-7 {
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi8: ssi@8 {
-				interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+			ssi8: ssi-8 {
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
-			ssi9: ssi@9 {
-				interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+			ssi9: ssi-9 {
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
new file mode 100644
index 000000000..e7b40f0e7
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -0,0 +1,66 @@
+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+
+/ {
+	model = "Blanche";
+	compatible = "renesas,blanche", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&scif0 {
+	status = "okay";
+};
+
+&scif3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
new file mode 100644
index 000000000..3fd61d7ab
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -0,0 +1,385 @@
+/*
+ * Device Tree Source for the r8a7792 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7792-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7792";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7792_CLK_Z>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7792_PD_CA15_SCU>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7792-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x1000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7792", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R8A7792_CLK_IRQC>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7792-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		jpu: jpeg-codec@fe980000 {
+			compatible = "renesas,jpu-r8a7792",
+				     "renesas,rcar-gen2-jpu";
+			reg = <0 0xfe980000 0 0x10300>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_JPU>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7792-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "z";
+			#power-domain-cells = <0>;
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		zs_clk: zs {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+		};
+		p_clk: p {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+		};
+		cp_clk: cp {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <48>;
+			clock-mult = <1>;
+		};
+		m2_clk: m2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+
+		/* Gate clocks */
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&m2_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7792_CLK_JPU>;
+			clock-output-names = "jpu";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0
+			>;
+			clock-output-names = "sys-dmac1", "sys-dmac0";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7792_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
+		mstp7_clks: mstp7_clks@e615014c {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
+				 <&p_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
+				R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
+				R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
+			>;
+			clock-output-names = "hscif1", "hscif0", "scif3",
+					     "scif2", "scif1", "scif0";
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
new file mode 100644
index 000000000..90af18600
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -0,0 +1,560 @@
+/*
+ * Device Tree Source for the Gose board
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7793.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gose";
+	compatible = "renesas,gose", "renesas,r8a7793";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+		        gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_1>;
+		        label = "SW2-1";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-2 {
+		        gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_2>;
+		        label = "SW2-2";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-3 {
+		        gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_3>;
+		        label = "SW2-3";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-4 {
+		        gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_4>;
+		        label = "SW2-4";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-a {
+		        gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_A>;
+		        label = "SW30";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-b {
+		        gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_B>;
+		        label = "SW31";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-c {
+		        gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_C>;
+		        label = "SW32";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-d {
+		        gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_D>;
+		        label = "SW33";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-e {
+		        gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_E>;
+		        label = "SW34";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-f {
+		        gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_F>;
+		        label = "SW35";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-g {
+		        gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_G>;
+		        label = "SW36";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+		led7 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			label = "LED7";
+		};
+		led8 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			label = "LED8";
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4643: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&audio_clock>;
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+		 <&mstp7_clks R8A7793_CLK_DU1>,
+		 <&mstp7_clks R8A7793_CLK_LVDS0>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "lvds.0",
+		      "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_d";
+		function = "scif1";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	sound_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	ak4643: codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "renesas,r1ex24002", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
new file mode 100644
index 000000000..8d02aacf2
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -0,0 +1,1504 @@
+/*
+ * Device Tree Source for the r8a7793 SoC
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7793-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7793-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7793";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		spi0 = &qspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			voltage-tolerance = <1>; /* 1% */
+			clocks = <&cpg_clocks R8A7793_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+			power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+		};
+
+		L2_CA15: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7793_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	apmu@e6152000 {
+		compatible = "renesas,r8a7793-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <115000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	gpio0: gpio@e6050000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6050000 0 0x50>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO0>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+	};
+
+	gpio1: gpio@e6051000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6051000 0 0x50>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO1>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+	};
+
+	gpio2: gpio@e6052000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6052000 0 0x50>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO2>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+	};
+
+	gpio3: gpio@e6053000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6053000 0 0x50>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO3>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+	};
+
+	gpio4: gpio@e6054000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6054000 0 0x50>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO4>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+	};
+
+	gpio5: gpio@e6055000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6055000 0 0x50>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO5>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+	};
+
+	gpio6: gpio@e6055400 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6055400 0 0x50>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO6>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+	};
+
+	gpio7: gpio@e6055800 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6055800 0 0x50>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 224 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO7>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+	};
+
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7793",
+				"renesas,rcar-gen2-thermal",
+				"renesas,rcar-thermal";
+		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+
+		renesas,channels-mask = <0x60>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+
+		renesas,channels-mask = <0xff>;
+
+		status = "disabled";
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc-r8a7793", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+	};
+
+	dmac0: dma-controller@e6700000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller@e6720000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	audma0: dma-controller@ec700000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xec700000 0 0x10000>;
+		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	audma1: dma-controller@ec720000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xec720000 0 0x10000>;
+		interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	/* The memory map in the User's Manual maps the cores to bus numbers */
+	i2c0: i2c@e6508000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6520000 0 0x40>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@e6528000 {
+		/* doesn't need pinmux */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6528000 0 0x40>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <110>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@e60b0000 {
+		/* doesn't need pinmux */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x425>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+		       <&dmac1 0x77>, <&dmac1 0x78>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+		       <&dmac1 0x61>, <&dmac1 0x62>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x425>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+		       <&dmac1 0x65>, <&dmac1 0x66>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6060000 {
+		compatible = "renesas,pfc-r8a7793";
+		reg = <0 0xe6060000 0 0x250>;
+	};
+
+	sdhi0: sd@ee100000 {
+		compatible = "renesas,sdhi-r8a7793";
+		reg = <0 0xee100000 0 0x328>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_SDHI0>;
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ee140000 {
+		compatible = "renesas,sdhi-r8a7793";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_SDHI1>;
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ee160000 {
+		compatible = "renesas,sdhi-r8a7793";
+		reg = <0 0xee160000 0 0x100>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_SDHI2>;
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+		       <&dmac1 0xd1>, <&dmac1 0xd2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		reg-io-width = <4>;
+		status = "disabled";
+		max-frequency = <97500000>;
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+		       <&dmac1 0x21>, <&dmac1 0x22>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+		       <&dmac1 0x25>, <&dmac1 0x26>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+		       <&dmac1 0x27>, <&dmac1 0x28>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c70000 0 64>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+		       <&dmac1 0x1b>, <&dmac1 0x1c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c78000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c78000 0 64>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+		       <&dmac1 0x1f>, <&dmac1 0x20>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scifa5: serial@e6c80000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c80000 0 64>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+		       <&dmac1 0x23>, <&dmac1 0x24>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7793",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7793",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+		       <&dmac1 0x19>, <&dmac1 0x1a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7793",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+		       <&dmac1 0x1d>, <&dmac1 0x1e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+		       <&dmac1 0x29>, <&dmac1 0x2a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+		       <&dmac1 0x2d>, <&dmac1 0x2e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif2: serial@e6e58000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6e58000 0 64>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+		       <&dmac1 0x2b>, <&dmac1 0x2c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif3: serial@e6ea8000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6ea8000 0 64>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+		       <&dmac1 0x2f>, <&dmac1 0x30>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif4: serial@e6ee0000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6ee0000 0 64>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+		       <&dmac1 0xfb>, <&dmac1 0xfc>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif5: serial@e6ee8000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6ee8000 0 64>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+		       <&dmac1 0xfd>, <&dmac1 0xfe>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7793",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+		       <&dmac1 0x39>, <&dmac1 0x3a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7793",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+		       <&dmac1 0x4d>, <&dmac1 0x4e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	hscif2: serial@e62d0000 {
+		compatible = "renesas,hscif-r8a7793",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
+		reg = <0 0xe62d0000 0 96>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+		       <&dmac1 0x3b>, <&dmac1 0x3c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	ether: ethernet@ee700000 {
+		compatible = "renesas,ether-r8a7793";
+		reg = <0 0xee700000 0 0x400>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7793", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7793";
+		reg = <0 0xfeb00000 0 0x40000>,
+		      <0 0xfeb90000 0 0x1c>;
+		reg-names = "du", "lvds.0";
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+			 <&mstp7_clks R8A7793_CLK_DU1>,
+			 <&mstp7_clks R8A7793_CLK_LVDS0>;
+		clock-names = "du.0", "du.1", "lvds.0";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+		};
+	};
+
+	can0: can@e6e80000 {
+		compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_RCAN0>,
+			 <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	can1: can@e6e88000 {
+		compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can";
+		reg = <0 0xe6e88000 0 0x1000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_RCAN1>,
+			 <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+		};
+
+		/*
+		 * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+		 * default. Boards that provide audio clocks should override them.
+		 */
+		audio_clk_a: audio_clk_a {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clk_b: audio_clk_b {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clk_c: audio_clk_c {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
+
+		/* External CAN clock */
+		can_clk: can {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+		};
+
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7793-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk &usb_extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan", "adsp";
+			#power-domain-cells = <0>;
+		};
+
+		/* Variable factor clocks */
+		sd2_clk: sd2@e6150078 {
+			compatible = "renesas,r8a7793-div6-clock",
+				     "renesas,cpg-div6-clock";
+			reg = <0 0xe6150078 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+		};
+		sd3_clk: sd3@e615026c {
+			compatible = "renesas,r8a7793-div6-clock",
+				     "renesas,cpg-div6-clock";
+			reg = <0 0xe615026c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+		};
+		mmc0_clk: mmc0@e6150240 {
+			compatible = "renesas,r8a7793-div6-clock",
+				     "renesas,cpg-div6-clock";
+			reg = <0 0xe6150240 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		zg_clk: zg {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <5>;
+			clock-mult = <1>;
+		};
+		zx_clk: zx {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+		};
+		zs_clk: zs {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+		};
+		hp_clk: hp {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+		};
+		p_clk: p {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+		};
+		m2_clk: m2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+		rclk_clk: rclk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(48 * 1024)>;
+			clock-mult = <1>;
+		};
+		mp_clk: mp {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+		};
+		cp_clk: cp {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* Gate clocks */
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+				 <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
+				 <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
+				 <&zs_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_VCP0 R8A7793_CLK_VPC0
+				R8A7793_CLK_SSP1 R8A7793_CLK_TMU1
+				R8A7793_CLK_3DG R8A7793_CLK_2DDMAC
+				R8A7793_CLK_FDP1_1 R8A7793_CLK_FDP1_0
+				R8A7793_CLK_TMU3 R8A7793_CLK_TMU2
+				R8A7793_CLK_CMT0 R8A7793_CLK_TMU0
+				R8A7793_CLK_VSP1_DU1 R8A7793_CLK_VSP1_DU0
+				R8A7793_CLK_VSP1_S
+			>;
+			clock-output-names =
+				"vcp0", "vpc0", "ssp_dev", "tmu1",
+				"pvrsrvkm", "tddmac", "fdp1", "fdp0",
+				"tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+				"vsp1-du0", "vsps";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_SCIFA2 R8A7793_CLK_SCIFA1 R8A7793_CLK_SCIFA0
+				R8A7793_CLK_SCIFB0 R8A7793_CLK_SCIFB1 R8A7793_CLK_SCIFB2
+				R8A7793_CLK_SYS_DMAC1 R8A7793_CLK_SYS_DMAC0
+			>;
+			clock-output-names =
+				"scifa2", "scifa1", "scifa0", "scifb0",
+				"scifb1", "scifb2", "sys-dmac1", "sys-dmac0";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>,
+				 <&cpg_clocks R8A7793_CLK_SD0>, <&mmc0_clk>,
+				 <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>,
+				 <&rclk_clk>, <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_TPU0 R8A7793_CLK_SDHI2
+				R8A7793_CLK_SDHI1 R8A7793_CLK_SDHI0
+				R8A7793_CLK_MMCIF0 R8A7793_CLK_IIC0
+				R8A7793_CLK_PCIEC R8A7793_CLK_IIC1
+				R8A7793_CLK_SSUSB R8A7793_CLK_CMT1
+				R8A7793_CLK_USBDMAC0 R8A7793_CLK_USBDMAC1
+			>;
+			clock-output-names =
+				"tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0",
+				"i2c7", "pciec", "i2c8", "ssusb", "cmt1",
+				"usbdmac0", "usbdmac1";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7793_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7793_CLK_AUDIO_DMAC0 R8A7793_CLK_AUDIO_DMAC1
+					 R8A7793_CLK_THERMAL>;
+			clock-output-names = "audmac0", "audmac1", "thermal";
+		};
+		mstp7_clks: mstp7_clks@e615014c {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&mp_clk>,  <&hp_clk>, <&zs_clk>, <&p_clk>,
+				 <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+				 <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>,
+				 <&zx_clk>, <&zx_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_EHCI R8A7793_CLK_HSUSB
+				R8A7793_CLK_HSCIF2 R8A7793_CLK_SCIF5
+				R8A7793_CLK_SCIF4 R8A7793_CLK_HSCIF1
+				R8A7793_CLK_HSCIF0 R8A7793_CLK_SCIF3
+				R8A7793_CLK_SCIF2 R8A7793_CLK_SCIF1
+				R8A7793_CLK_SCIF0 R8A7793_CLK_DU1
+				R8A7793_CLK_DU0 R8A7793_CLK_LVDS0
+			>;
+			clock-output-names =
+				"ehci", "hsusb", "hscif2", "scif5", "scif4",
+				"hscif1", "hscif0", "scif3", "scif2",
+				"scif1", "scif0", "du1", "du0", "lvds0";
+		};
+		mstp8_clks: mstp8_clks@e6150990 {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&zx_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+				 <&p_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_IPMMU_SGX R8A7793_CLK_VIN2
+				R8A7793_CLK_VIN1 R8A7793_CLK_VIN0
+				R8A7793_CLK_ETHER R8A7793_CLK_SATA1
+				R8A7793_CLK_SATA0
+			>;
+			clock-output-names =
+				"ipmmu_sgx", "vin2", "vin1", "vin0", "ether",
+				"sata1", "sata0";
+		};
+		mstp9_clks: mstp9_clks@e6150994 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&p_clk>, <&p_clk>,
+				 <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
+				 <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
+				R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
+				R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
+				R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
+				R8A7793_CLK_QSPI_MOD R8A7793_CLK_RCAN1
+				R8A7793_CLK_RCAN0 R8A7793_CLK_I2C5
+				R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
+				R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
+				R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
+			>;
+			clock-output-names =
+				"gpio7", "gpio6", "gpio5", "gpio4",
+				"gpio3", "gpio2", "gpio1", "gpio0",
+				"rcan1", "rcan0", "qspi_mod", "i2c5",
+				"i2c6", "i2c4", "i2c3", "i2c2", "i2c1",
+				"i2c0";
+		};
+		mstp10_clks: mstp10_clks@e6150998 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+			clocks = <&p_clk>,
+				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&p_clk>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>;
+
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_SSI_ALL
+				R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5
+				R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0
+				R8A7793_CLK_SCU_ALL
+				R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0
+				R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0
+				R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5
+				R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0
+			>;
+			clock-output-names =
+				"ssi-all",
+				"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
+				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
+				"scu-all",
+				"scu-dvc1", "scu-dvc0",
+				"scu-ctu1-mix1", "scu-ctu0-mix0",
+				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
+				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
+		};
+		mstp11_clks: mstp11_clks@e615099c {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_SCIFA3 R8A7793_CLK_SCIFA4 R8A7793_CLK_SCIFA5
+			>;
+			clock-output-names = "scifa3", "scifa4", "scifa5";
+		};
+	};
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,r8a7793-sysc";
+		reg = <0 0xe6180000 0 0x0200>;
+		#power-domain-cells = <1>;
+	};
+
+	ipmmu_sy0: mmu@e6280000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xe6280000 0 0x1000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_sy1: mmu@e6290000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xe6290000 0 0x1000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_ds: mmu@e6740000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xe6740000 0 0x1000>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mp: mmu@ec680000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xec680000 0 0x1000>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mx: mmu@fe951000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_rt: mmu@ffc80000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xffc80000 0 0x1000>;
+		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_gp: mmu@e62a0000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xe62a0000 0 0x1000>;
+		interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	rcar_sound: sound@ec500000 {
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
+		compatible =  "renesas,rcar_sound-r8a7793", "renesas,rcar_sound-gen2";
+		reg =	<0 0xec500000 0 0x1000>, /* SCU */
+			<0 0xec5a0000 0 0x100>,  /* ADG */
+			<0 0xec540000 0 0x1000>, /* SSIU */
+			<0 0xec541000 0 0x280>,  /* SSI */
+			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+		clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+			<&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>,
+			<&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>,
+			<&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>,
+			<&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>,
+			<&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>,
+			<&mstp10_clks R8A7793_CLK_SCU_DVC0>, <&mstp10_clks R8A7793_CLK_SCU_DVC1>,
+			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+		clock-names = "ssi-all",
+				"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+				"src.9", "src.8", "src.7", "src.6", "src.5",
+				"src.4", "src.3", "src.2", "src.1", "src.0",
+				"dvc.0", "dvc.1",
+				"clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+
+		status = "disabled";
+
+		rcar_sound,dvc {
+			dvc0: dvc-0 {
+				dmas = <&audma0 0xbc>;
+				dma-names = "tx";
+			};
+			dvc1: dvc-1 {
+				dmas = <&audma0 0xbe>;
+				dma-names = "tx";
+			};
+		};
+
+		rcar_sound,src {
+			src0: src-0 {
+				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x85>, <&audma1 0x9a>;
+				dma-names = "rx", "tx";
+			};
+			src1: src-1 {
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x87>, <&audma1 0x9c>;
+				dma-names = "rx", "tx";
+			};
+			src2: src-2 {
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x89>, <&audma1 0x9e>;
+				dma-names = "rx", "tx";
+			};
+			src3: src-3 {
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+				dma-names = "rx", "tx";
+			};
+			src4: src-4 {
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+				dma-names = "rx", "tx";
+			};
+			src5: src-5 {
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+				dma-names = "rx", "tx";
+			};
+			src6: src-6 {
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x91>, <&audma1 0xb4>;
+				dma-names = "rx", "tx";
+			};
+			src7: src-7 {
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x93>, <&audma1 0xb6>;
+				dma-names = "rx", "tx";
+			};
+			src8: src-8 {
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x95>, <&audma1 0xb8>;
+				dma-names = "rx", "tx";
+			};
+			src9: src-9 {
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x97>, <&audma1 0xba>;
+				dma-names = "rx", "tx";
+			};
+		};
+
+		rcar_sound,ssi {
+			ssi0: ssi-0 {
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi1: ssi-1 {
+				 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi2: ssi-2 {
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi3: ssi-3 {
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi4: ssi-4 {
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi5: ssi-5 {
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi6: ssi-6 {
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi7: ssi-7 {
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi8: ssi-8 {
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi9: ssi-9 {
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 928cfa641..1ad37d431 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -21,7 +21,7 @@
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif2;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -33,17 +33,130 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
 };
 
 &extal_clk {
 	clock-frequency = <20000000>;
 };
 
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
+		function = "du";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq8";
+		function = "intc";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+};
+
 &cmt0 {
 	status = "okay";
 };
 
+&pfc {
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+};
+
 &ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
 	status = "okay";
@@ -56,6 +169,90 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
+};
+
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
 &scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "system";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "user";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
new file mode 100644
index 000000000..cf24f45ff
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -0,0 +1,394 @@
+/*
+ * Device Tree Source for the SILK board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014-2015 Renesas Solutions Corp.
+ * Copyright (C) 2014-2015 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "SILK";
+	compatible = "renesas,silk", "renesas,r8a7794";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-d3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq8";
+		function = "intc";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	mmcif0_pins: mmcif0 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&d3_3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+/* composite video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&x2_clk>, <&x3_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index b73819423..685f986cf 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/clock/r8a7794-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7794-sysc.h>
 
 / {
 	compatible = "renesas,r8a7794";
@@ -19,6 +20,20 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		spi0 = &qspi;
+		vin0 = &vin0;
+		vin1 = &vin1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -28,6 +43,8 @@
 			compatible = "arm,cortex-a7";
 			reg = <0>;
 			clock-frequency = <1000000000>;
+			power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
 		};
 
 		cpu1: cpu@1 {
@@ -35,11 +52,21 @@
 			compatible = "arm,cortex-a7";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		L2_CA7: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7794_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
 		};
 	};
 
 	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a7-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
@@ -47,16 +74,108 @@
 			<0 0xf1002000 0 0x1000>,
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	gpio0: gpio@e6050000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6050000 0 0x50>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO0>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	gpio1: gpio@e6051000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6051000 0 0x50>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO1>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	gpio2: gpio@e6052000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6052000 0 0x50>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO2>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	gpio3: gpio@e6053000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6053000 0 0x50>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO3>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	gpio4: gpio@e6054000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6054000 0 0x50>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO4>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	gpio5: gpio@e6055000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6055000 0 0x50>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 28>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	gpio6: gpio@e6055400 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6055400 0 0x50>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO6>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 	};
 
 	cmt0: timer@ffca0000 {
 		compatible = "renesas,cmt-48-gen2";
 		reg = <0 0xffca0000 0 0x1004>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 
 		renesas,channels-mask = <0x60>;
 
@@ -66,16 +185,17 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,cmt-48-gen2";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 
 		renesas,channels-mask = <0xff>;
 
@@ -84,10 +204,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	irqc0: interrupt-controller@e61c0000 {
@@ -95,38 +215,44 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	pfc: pin-controller@e6060000 {
+		compatible = "renesas,pfc-r8a7794";
+		reg = <0 0xe6060000 0 0x11c>;
 	};
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
-		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
-			      0 200 IRQ_TYPE_LEVEL_HIGH
-			      0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH
-			      0 205 IRQ_TYPE_LEVEL_HIGH
-			      0 206 IRQ_TYPE_LEVEL_HIGH
-			      0 207 IRQ_TYPE_LEVEL_HIGH
-			      0 208 IRQ_TYPE_LEVEL_HIGH
-			      0 209 IRQ_TYPE_LEVEL_HIGH
-			      0 210 IRQ_TYPE_LEVEL_HIGH
-			      0 211 IRQ_TYPE_LEVEL_HIGH
-			      0 212 IRQ_TYPE_LEVEL_HIGH
-			      0 213 IRQ_TYPE_LEVEL_HIGH
-			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -134,29 +260,30 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
-		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-			      0 216 IRQ_TYPE_LEVEL_HIGH
-			      0 217 IRQ_TYPE_LEVEL_HIGH
-			      0 218 IRQ_TYPE_LEVEL_HIGH
-			      0 219 IRQ_TYPE_LEVEL_HIGH
-			      0 308 IRQ_TYPE_LEVEL_HIGH
-			      0 309 IRQ_TYPE_LEVEL_HIGH
-			      0 310 IRQ_TYPE_LEVEL_HIGH
-			      0 311 IRQ_TYPE_LEVEL_HIGH
-			      0 312 IRQ_TYPE_LEVEL_HIGH
-			      0 313 IRQ_TYPE_LEVEL_HIGH
-			      0 314 IRQ_TYPE_LEVEL_HIGH
-			      0 315 IRQ_TYPE_LEVEL_HIGH
-			      0 316 IRQ_TYPE_LEVEL_HIGH
-			      0 317 IRQ_TYPE_LEVEL_HIGH
-			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -164,240 +291,628 @@
 				"ch12", "ch13", "ch14";
 		clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>;
 		clock-names = "fck";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
 
 	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+		       <&dmac1 0x21>, <&dmac1 0x22>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+		       <&dmac1 0x25>, <&dmac1 0x26>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+		       <&dmac1 0x27>, <&dmac1 0x28>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c70000 0 64>;
-		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+		       <&dmac1 0x1b>, <&dmac1 0x1c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa4: serial@e6c78000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c78000 0 64>;
-		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+		       <&dmac1 0x1f>, <&dmac1 0x20>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifa5: serial@e6c80000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c80000 0 64>;
-		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+		       <&dmac1 0x23>, <&dmac1 0x24>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7794",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+		       <&dmac1 0x3d>, <&dmac1 0x3e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7794",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+		       <&dmac1 0x19>, <&dmac1 0x1a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7794",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
-		dma-names = "tx", "rx";
+		clock-names = "fck";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+		       <&dmac1 0x1d>, <&dmac1 0x1e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+		       <&dmac1 0x29>, <&dmac1 0x2a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+		       <&dmac1 0x2d>, <&dmac1 0x2e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif2: serial@e6e58000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e58000 0 64>;
-		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+		       <&dmac1 0x2b>, <&dmac1 0x2c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif3: serial@e6ea8000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ea8000 0 64>;
-		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+		       <&dmac1 0x2f>, <&dmac1 0x30>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif4: serial@e6ee0000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ee0000 0 64>;
-		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+		       <&dmac1 0xfb>, <&dmac1 0xfc>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	scif5: serial@e6ee8000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ee8000 0 64>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+		       <&dmac1 0xfd>, <&dmac1 0xfe>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7794",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+		       <&dmac1 0x39>, <&dmac1 0x3a>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7794",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+		       <&dmac1 0x4d>, <&dmac1 0x4e>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	hscif2: serial@e62d0000 {
-		compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7794",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62d0000 0 96>;
-		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
-		clock-names = "sci_ick";
-		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
-		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+		       <&dmac1 0x3b>, <&dmac1 0x3c>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	ether: ethernet@ee700000 {
 		compatible = "renesas,ether-r8a7794";
 		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		phy-mode = "rmii";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
 	};
 
+	avb: ethernet@e6800000 {
+		compatible = "renesas,etheravb-r8a7794",
+			     "renesas,etheravb-rcar-gen2";
+		reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	/* The memory map in the User's Manual maps the cores to bus numbers */
+	i2c0: i2c@e6508000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6520000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6520000 0 0x40>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@e6528000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6528000 0 0x40>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@e6500000 {
+		compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+		       <&dmac1 0x61>, <&dmac1 0x62>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6510000 {
+		compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x425>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+		       <&dmac1 0x65>, <&dmac1 0x66>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+		       <&dmac1 0xd1>, <&dmac1 0xd2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7794";
 		reg = <0 0xee100000 0 0x200>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+		       <&dmac1 0xcd>, <&dmac1 0xce>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi1: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a7794";
 		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+		dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+		       <&dmac1 0xc1>, <&dmac1 0xc2>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
 	sdhi2: sd@ee160000 {
 		compatible = "renesas,sdhi-r8a7794";
 		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+		dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+		       <&dmac1 0xd3>, <&dmac1 0xd4>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7794", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7794";
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7794";
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	pci0: pci@ee090000 {
+		compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2";
+		device_type = "pci";
+		reg = <0 0xee090000 0 0xc00>,
+		      <0 0xee080000 0 0x1100>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		status = "disabled";
+
+		bus-range = <0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+	};
+
+	pci1: pci@ee0d0000 {
+		compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2";
+		device_type = "pci";
+		reg = <0 0xee0d0000 0 0xc00>,
+		      <0 0xee0c0000 0 0x1100>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		status = "disabled";
+
+		bus-range = <1 1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+	};
+
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@e6590100 {
+		compatible = "renesas,usb-phy-r8a7794";
+		reg = <0 0xe6590100 0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		clock-names = "usbhs";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		status = "disabled";
+
+		usb0: usb-channel@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+		usb2: usb-channel@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+		};
+	};
+
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7794";
+		reg = <0 0xfeb00000 0 0x40000>;
+		reg-names = "du";
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+			 <&mstp7_clks R8A7794_CLK_DU0>;
+		clock-names = "du.0", "du.1";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb0: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_rgb1: endpoint {
+				};
+			};
+		};
+	};
+
+	can0: can@e6e80000 {
+		compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_RCAN0>,
+			 <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	can1: can@e6e88000 {
+		compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can";
+		reg = <0 0xe6e88000 0 0x1000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_RCAN1>,
+			 <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 		status = "disabled";
 	};
 
@@ -407,12 +922,34 @@
 		ranges;
 
 		/* External root clock */
-		extal_clk: extal_clk {
+		extal_clk: extal {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overriden by the board. */
 			clock-frequency = <0>;
-			clock-output-names = "extal";
+		};
+
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
+
+		/* External CAN clock */
+		can_clk: can {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+		};
+
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 
 		/* Special CPG clocks */
@@ -420,187 +957,160 @@
 			compatible = "renesas,r8a7794-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z";
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan";
+			#power-domain-cells = <0>;
 		};
 		/* Variable factor clocks */
-		sd2_clk: sd2_clk@e6150078 {
+		sd2_clk: sd2@e6150078 {
 			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150078 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd2";
 		};
-		sd3_clk: sd3_clk@e615026c {
+		sd3_clk: sd3@e615026c {
 			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd3";
 		};
-		mmc0_clk: mmc0_clk@e6150240 {
+		mmc0_clk: mmc0@e6150240 {
 			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150240 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "mmc0";
 		};
 
 		/* Fixed factor clocks */
-		pll1_div2_clk: pll1_div2_clk {
+		pll1_div2_clk: pll1_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "pll1_div2";
 		};
-		zg_clk: zg_clk {
+		zg_clk: zg {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <6>;
 			clock-mult = <1>;
-			clock-output-names = "zg";
 		};
-		zx_clk: zx_clk {
+		zx_clk: zx {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <3>;
 			clock-mult = <1>;
-			clock-output-names = "zx";
 		};
-		zs_clk: zs_clk {
+		zs_clk: zs {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <6>;
 			clock-mult = <1>;
-			clock-output-names = "zs";
 		};
-		hp_clk: hp_clk {
+		hp_clk: hp {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <12>;
 			clock-mult = <1>;
-			clock-output-names = "hp";
 		};
-		i_clk: i_clk {
+		i_clk: i {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "i";
 		};
-		b_clk: b_clk {
+		b_clk: b {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <12>;
 			clock-mult = <1>;
-			clock-output-names = "b";
 		};
-		p_clk: p_clk {
+		p_clk: p {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <24>;
 			clock-mult = <1>;
-			clock-output-names = "p";
 		};
-		cl_clk: cl_clk {
+		cl_clk: cl {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <48>;
 			clock-mult = <1>;
-			clock-output-names = "cl";
 		};
-		m2_clk: m2_clk {
+		m2_clk: m2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "m2";
 		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
-		rclk_clk: rclk_clk {
+		rclk_clk: rclk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <(48 * 1024)>;
 			clock-mult = <1>;
-			clock-output-names = "rclk";
 		};
-		oscclk_clk: oscclk_clk {
+		oscclk_clk: oscclk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <(12 * 1024)>;
 			clock-mult = <1>;
-			clock-output-names = "oscclk";
 		};
-		zb3_clk: zb3_clk {
+		zb3_clk: zb3 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
 			#clock-cells = <0>;
 			clock-div = <4>;
 			clock-mult = <1>;
-			clock-output-names = "zb3";
 		};
-		zb3d2_clk: zb3d2_clk {
+		zb3d2_clk: zb3d2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "zb3d2";
 		};
-		ddr_clk: ddr_clk {
+		ddr_clk: ddr {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
 			#clock-cells = <0>;
 			clock-div = <8>;
 			clock-mult = <1>;
-			clock-output-names = "ddr";
 		};
-		mp_clk: mp_clk {
+		mp_clk: mp {
 			compatible = "fixed-factor-clock";
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
 			clock-div = <15>;
 			clock-mult = <1>;
-			clock-output-names = "mp";
 		};
-		cp_clk: cp_clk {
+		cp_clk: cp {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <48>;
 			clock-mult = <1>;
-			clock-output-names = "cp";
 		};
 
-		acp_clk: acp_clk {
+		acp_clk: acp {
 			compatible = "fixed-factor-clock";
 			clocks = <&extal_clk>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "acp";
 		};
 
 		/* Gate clocks */
@@ -651,16 +1161,19 @@
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
 			clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
-			         <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
+				 <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>,
+				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 			        R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0
-				R8A7794_CLK_MMCIF0 R8A7794_CLK_CMT1
+				R8A7794_CLK_MMCIF0 R8A7794_CLK_IIC0
+				R8A7794_CLK_IIC1 R8A7794_CLK_CMT1
 				R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
 			>;
 			clock-output-names =
 			        "sdhi2", "sdhi1", "sdhi0",
-				"mmcif0", "cmt1", "usbdmac0", "usbdmac1";
+				"mmcif0", "i2c6", "i2c7",
+				"cmt1", "usbdmac0", "usbdmac1";
 		};
 		mstp4_clks: mstp4_clks@e6150140 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -675,44 +1188,54 @@
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
 			clocks = <&mp_clk>, <&mp_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
-				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				 <&zx_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
 				R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
 				R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
 				R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
-				R8A7794_CLK_SCIF0
+				R8A7794_CLK_SCIF0 R8A7794_CLK_DU0
 			>;
 			clock-output-names =
 				"ehci", "hsusb",
 				"hscif2", "scif5", "scif4", "hscif1", "hscif0",
-				"scif3", "scif2", "scif1", "scif0";
+				"scif3", "scif2", "scif1", "scif0", "du0";
 		};
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&hp_clk>, <&p_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
-				R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER
+				R8A7794_CLK_VIN1 R8A7794_CLK_VIN0
+				R8A7794_CLK_ETHERAVB R8A7794_CLK_ETHER
 			>;
 			clock-output-names =
-				"vin1", "vin0", "ether";
+				"vin1", "vin0", "etheravb", "ether";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
-				<&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>,
+				 <&p_clk>, <&cpg_clocks R8A7794_CLK_QSPI>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
-			clock-indices = <
-				R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
-				R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
-				R8A7794_CLK_I2C0
-			>;
+			clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
+					 R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
+					 R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
+					 R8A7794_CLK_GPIO0 R8A7794_CLK_RCAN1
+					 R8A7794_CLK_RCAN0 R8A7794_CLK_QSPI_MOD
+					 R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+					 R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
+					 R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
 			clock-output-names =
-				"qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+				"gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
+				"gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod",
+				"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
 		};
 		mstp11_clks: mstp11_clks@e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -726,52 +1249,60 @@
 		};
 	};
 
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,r8a7794-sysc";
+		reg = <0 0xe6180000 0 0x0200>;
+		#power-domain-cells = <1>;
+	};
+
 	ipmmu_sy0: mmu@e6280000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6280000 0 0x1000>;
-		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_sy1: mmu@e6290000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6290000 0 0x1000>;
-		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_ds: mmu@e6740000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6740000 0 0x1000>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
+		status = "disabled";
 	};
 
 	ipmmu_mp: mmu@ec680000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xec680000 0 0x1000>;
-		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mx: mmu@fe951000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xfe951000 0 0x1000>;
-		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
+		status = "disabled";
 	};
 
 	ipmmu_gp: mmu@e62a0000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xe62a0000 0 0x1000>;
-		interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 261 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
new file mode 100644
index 000000000..a07ebf8f6
--- /dev/null
+++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Common file for the AA121TD01 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	panel {
+		compatible = "mitsubishi,aa121td01", "panel-dpi";
+
+		width-mm = <261>;
+		height-mm = <163>;
+
+		panel-timing {
+			/* 1280x800 @60Hz */
+			clock-frequency = <71000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hsync-len = <70>;
+			hfront-porch = <20>;
+			hback-porch = <70>;
+			vsync-len = <5>;
+			vfront-porch = <3>;
+			vback-porch = <15>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
new file mode 100644
index 000000000..8db9e9b19
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -0,0 +1,83 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+	model = "Rockchip RK3036 Evaluation board";
+	compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
+
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
new file mode 100644
index 000000000..1df1557a4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -0,0 +1,434 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+	model = "Rockchip RK3036 KylinBoard";
+	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		work {
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			label = "kylin:red:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_wake_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - SDIO_RESET_L_WL_RST
+		 * - SDIO_RESET_L_BT_EN
+		 */
+		reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+			      <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
+			      <&gpio2 9  GPIO_ACTIVE_LOW>; /* BT_EN */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,rt5616-codec";
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC1", "Microphone Jack",
+			"MIC2", "Microphone Jack",
+			"Microphone Jack", "micbias1",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rt5616>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&acodec {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
+
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&emmc {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vccio_pmu>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_tp: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_tp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vout5: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vout5";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_codec: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	rt5616: rt5616@1b {
+		compatible = "rt5616";
+		reg = <0x1b>;
+		clocks = <&cru SCLK_I2S_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	default-sample-phase = <90>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		led_ctl: led-ctl {
+			rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdio {
+		bt_wake_h: bt-wake-h {
+			rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sleep {
+		global_pwroff: global-pwroff {
+			rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
new file mode 100644
index 000000000..843d2be2e
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -0,0 +1,761 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3036";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		mshc0 = &emmc;
+		mshc1 = &sdmmc;
+		mshc2 = &sdio;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		spi = &spi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3036-smp";
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			resets = <&cru SRST_CORE0>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	bus_intmem@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x00 0x10>;
+		};
+	};
+
+	vop: vop@10118000 {
+		compatible = "rockchip,rk3036-vop";
+		reg = <0x10118000 0x19c>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@10118300 {
+		compatible = "rockchip,iommu";
+		reg = <0x10118300 0x100>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vop_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		g-use-dma;
+		status = "disabled";
+	};
+
+	usb_host: usb@101c0000 {
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x101c0000 0x40000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG1>;
+		clock-names = "otg";
+		dr_mode = "host";
+		status = "disabled";
+	};
+
+	emac: ethernet@10200000 {
+		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		reg = <0x10200000 0x4000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref", "macclk";
+		/*
+		 * Fix the emac parent clock is DPLL instead of APLL.
+		 * since that will cause some unstable things if the cpufreq
+		 * is working. (e.g: the accurate 50MHz what mac_ref need)
+		 */
+		assigned-clocks = <&cru SCLK_MACPLL>;
+		assigned-clock-parents = <&cru PLL_DPLL>;
+		max-speed = <100>;
+		phy-mode = "rmii";
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@10214000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		clock-frequency = <37500000>;
+		clock-freq-min-max = <400000 37500000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@10218000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10218000 0x4000>;
+		clock-freq-min-max = <400000 37500000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@1021c000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x1021c000 0x4000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		clock-frequency = <37500000>;
+		clock-freq-min-max = <400000 37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		default-sample-phase = <158>;
+		disable-wp;
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
+		fifo-depth = <0x100>;
+		mmc-ddr-1_8v;
+		non-removable;
+		num-slots = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		status = "disabled";
+	};
+
+	i2s: i2s@10220000 {
+		compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
+		reg = <0x10220000 0x4000>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_bus>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3036-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	grf: syscon@20008000 {
+		compatible = "rockchip,rk3036-grf", "syscon";
+		reg = <0x20008000 0x1000>;
+	};
+
+	acodec: acodec-ana@20030000 {
+		compatible = "rk3036-codec";
+		reg = <0x20030000 0x4000>;
+		rockchip,grf = <&grf>;
+		clock-names = "acodec_pclk";
+		clocks = <&cru PCLK_ACODEC>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@20034000 {
+		compatible = "rockchip,rk3036-inno-hdmi";
+		reg = <0x20034000 0x4000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru  PCLK_HDMI>;
+		clock-names = "pclk";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_ctl>;
+		status = "disabled";
+
+		hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in_vop: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vop_out_hdmi>;
+			};
+		};
+	};
+
+	timer: timer@20044000 {
+		compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
+		reg = <0x20044000 0x20>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	pwm0: pwm@20050000 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050000 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20050010 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050010 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@20056000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2005a000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@20060000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	uart1: serial@20064000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@20068000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@20072000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20072000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	spi: spi@20074000 {
+		compatible = "rockchip,rockchip-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>;
+		clock-names = "apb-pclk","spi_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3036-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_default: pcfg_pull_default {
+			bias-pull-pin-default;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 27 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdmmc_cd: sdmcc-cd {
+				rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>,
+						<1 19 RK_FUNC_1 &pcfg_pull_default>,
+						<1 20 RK_FUNC_1 &pcfg_pull_default>,
+						<1 21 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		sdio {
+			sdio_bus1: sdio-bus1 {
+				rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>,
+						<0 12 RK_FUNC_1 &pcfg_pull_default>,
+						<0 13 RK_FUNC_1 &pcfg_pull_default>,
+						<0 14 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdio_clk: sdio-clk {
+				rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		emmc {
+			/*
+			 * We run eMMC at max speed; bump up drive strength.
+			 * We also have external pulls, so disable the internal ones.
+			 */
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
+						<1 25 RK_FUNC_2 &pcfg_pull_default>,
+						<1 26 RK_FUNC_2 &pcfg_pull_default>,
+						<1 27 RK_FUNC_2 &pcfg_pull_default>,
+						<1 28 RK_FUNC_2 &pcfg_pull_default>,
+						<1 29 RK_FUNC_2 &pcfg_pull_default>,
+						<1 30 RK_FUNC_2 &pcfg_pull_default>,
+						<1 31 RK_FUNC_2 &pcfg_pull_default>;
+			};
+		};
+
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
+						<2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
+						<2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
+						<2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
+						<2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
+						<2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
+						<2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
+						<2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
+						<2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+						<0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
+						<2 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_bus: i2s-bus {
+				rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
+						<1 1 RK_FUNC_1 &pcfg_pull_default>,
+						<1 2 RK_FUNC_1 &pcfg_pull_default>,
+						<1 3 RK_FUNC_1 &pcfg_pull_default>,
+						<1 4 RK_FUNC_1 &pcfg_pull_default>,
+						<1 5 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		hdmi {
+			hdmi_ctl: hdmi-ctl {
+				rockchip,pins = <1 8  RK_FUNC_1 &pcfg_pull_none>,
+						<1 9  RK_FUNC_1 &pcfg_pull_none>,
+						<1 10 RK_FUNC_1 &pcfg_pull_none>,
+						<1 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
+						<0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
+						<2 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart1 */
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
+						<1 19 RK_FUNC_2 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		spi {
+			spi_txd:spi-txd {
+				rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
+			};
+
+			spi_rxd:spi-rxd {
+				rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>;
+			};
+
+			spi_clk:spi-clk {
+				rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>;
+			};
+
+			spi_cs0:spi-cs0 {
+				rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>;
+
+			};
+
+			spi_cs1:spi-cs1 {
+				rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>;
+
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index b299b2692..bc674ee20 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -42,6 +42,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3066a.dtsi"
 
 / {
@@ -49,9 +50,22 @@
 	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
 
 	memory {
+		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
 
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
 	vcc_sd0: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
@@ -64,24 +78,21 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		button@0 {
+		power {
 			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
-		button@1 {
+		volume-down {
 			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
-			linux,code = <104>;
+			linux,code = <KEY_VOLUMEDOWN>;
 			label = "GPIO Key Vol-";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <0>;
 			debounce-interval = <100>;
 		};
 		/* VOL+ comes somehow thru the ADC */
@@ -185,6 +196,8 @@
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd0>;
 	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
 	disable-wp;
 };
 
@@ -200,6 +213,10 @@
 	disable-wp;
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index 0a7304beb..a2b763e94 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -48,9 +48,22 @@
 	compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
 
 	memory {
+		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
 
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
 	vcc_sd0: sdmmc-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
@@ -177,6 +190,14 @@
 	};
 };
 
+&mmc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+};
+
 &pinctrl {
 	lan8720a {
 		phy_int: phy-int {
@@ -185,6 +206,10 @@
 	};
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
@@ -201,6 +226,18 @@
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
 &wdt {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 3ac151102..6e7f2187a 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -41,6 +41,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3066a.dtsi"
 
 / {
@@ -48,6 +49,7 @@
 	compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
 
 	memory {
+		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
 
@@ -60,19 +62,29 @@
 
 	keys: gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@0 {
-			gpio-key,wakeup = <1>;
+		power {
+			wakeup-source;
 			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pwr_key>;
 		};
 	};
 
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
 	vsys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
@@ -169,7 +181,6 @@
 };
 
 &emmc {
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
@@ -329,11 +340,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
 	status = "okay";
 };
 
 &mmc1 {
-	broken-cd;
 	bus-width = <4>;
 	disable-wp;
 	non-removable;
@@ -428,6 +440,10 @@
 	status = "okay";
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcc_25>;
 	status = "okay";
@@ -459,6 +475,10 @@
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
 &usb_otg {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index d32229b8a..0d0dae3a1 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -61,11 +61,13 @@
 			reg = <0x0>;
 			operating-points = <
 				/* kHz    uV */
-				1008000 1075000
-				 816000 1025000
-				 600000 1025000
-				 504000 1000000
-				 312000  975000
+				1416000 1300000
+				1200000 1175000
+				1008000 1125000
+				816000  1125000
+				600000  1100000
+				504000  1100000
+				312000  1075000
 			>;
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
@@ -103,6 +105,8 @@
 		dma-names = "tx", "rx";
 		clock-names = "i2s_hclk", "i2s_clk";
 		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		rockchip,playback-channels = <8>;
+		rockchip,capture-channels = <2>;
 		status = "disabled";
 	};
 
@@ -118,6 +122,8 @@
 		dma-names = "tx", "rx";
 		clock-names = "i2s_hclk", "i2s_clk";
 		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
 		status = "disabled";
 	};
 
@@ -133,6 +139,8 @@
 		dma-names = "tx", "rx";
 		clock-names = "i2s_hclk", "i2s_clk";
 		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
 		status = "disabled";
 	};
 
@@ -153,6 +161,19 @@
 		clock-names = "timer", "pclk";
 	};
 
+	efuse: efuse@20010000 {
+		compatible = "rockchip,rockchip-efuse";
+		reg = <0x20010000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
 	timer@20038000 {
 		compatible = "snps,dw-apb-timer-osc";
 		reg = <0x20038000 0x100>;
@@ -169,6 +190,42 @@
 		clock-names = "timer", "pclk";
 	};
 
+	tsadc: tsadc@20060000 {
+		compatible = "rockchip,rk3066-tsadc";
+		reg = <0x20060000 0x100>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "saradc", "apb_pclk";
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	usbphy: phy {
+		compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy@17c {
+			#phy-cells = <0>;
+			reg = <0x17c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+
+		usbphy1: usb-phy@188 {
+			#phy-cells = <0>;
+			reg = <0x188>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3066a-pinctrl";
 		rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 42faa19ed..1da46d138 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -41,6 +41,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3188.dtsi"
 
 / {
@@ -48,21 +49,20 @@
 	compatible = "radxa,rock", "rockchip,rk3188";
 
 	memory {
+		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		button@0 {
+		power {
 			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
@@ -89,6 +89,21 @@
 		};
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
 	ir_recv: gpio-ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 10 1>;
@@ -288,6 +303,8 @@
 	vmmc-supply = <&vcc_sd0>;
 
 	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
 	disable-wp;
 };
 
@@ -342,6 +359,10 @@
 	};
 };
 
+&spdif {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
@@ -358,6 +379,10 @@
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
 &usb_host {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 0f23aedf9..31f81b265 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -118,6 +118,22 @@
 		dma-names = "tx", "rx";
 		clock-names = "i2s_hclk", "i2s_clk";
 		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
+		status = "disabled";
+	};
+
+	spdif: sound@1011e000 {
+		compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+		reg = <0x1011e000 0x2000>;
+		#sound-dai-cells = <0>;
+		clock-names = "hclk", "mclk";
+		clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+		dmas = <&dmac1_s 8>;
+		dma-names = "tx";
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
 		status = "disabled";
 	};
 
@@ -130,6 +146,43 @@
 		#reset-cells = <1>;
 	};
 
+	efuse: efuse@20010000 {
+		compatible = "rockchip,rockchip-efuse";
+		reg = <0x20010000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
+	usbphy: phy {
+		compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy@10c {
+			#phy-cells = <0>;
+			reg = <0x10c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+
+		usbphy1: usb-phy@11c {
+			#phy-cells = <0>;
+			reg = <0x11c>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3188-pinctrl";
 		rockchip,grf = <&grf>;
@@ -462,6 +515,12 @@
 						<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
new file mode 100644
index 000000000..904668e2e
--- /dev/null
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -0,0 +1,72 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk322x.dtsi"
+
+/ {
+	model = "Rockchip RK3228 Evaluation board";
+	compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	disable-wp;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
new file mode 100644
index 000000000..b6a12035a
--- /dev/null
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -0,0 +1,90 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk322x.dtsi"
+
+/ {
+	model = "Rockchip RK3229 Evaluation board";
+	compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	ext_gmac: ext_gmac {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
new file mode 100644
index 000000000..9e6bf0e31
--- /dev/null
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -0,0 +1,705 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3228-cru.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			resets = <&cru SRST_CORE0>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			resets = <&cru SRST_CORE2>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			resets = <&cru SRST_CORE3>;
+		};
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@110f0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x110f0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	i2s1: i2s1@100b0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100b0000 0x4000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+		dmas = <&pdma 14>, <&pdma 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+		status = "disabled";
+	};
+
+	i2s0: i2s0@100c0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100c0000 0x4000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+		dmas = <&pdma 11>, <&pdma 12>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s2: i2s2@100e0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100e0000 0x4000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	grf: syscon@11000000 {
+		compatible = "syscon";
+		reg = <0x11000000 0x1000>;
+	};
+
+	uart0: serial@11010000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11010000 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart1: serial@11020000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11020000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@11030000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11030000 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@11050000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11050000 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11060000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11060000 0x1000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11070000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11070000 0x1000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@11080000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11080000 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@110b0000 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0000 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@110b0010 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0010 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@110b0020 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0020 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@110b0030 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		status = "disabled";
+	};
+
+	timer: timer@110c0000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0x110c0000 0x20>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	cru: clock-controller@110e0000 {
+		compatible = "rockchip,rk3228-cru";
+		reg = <0x110e0000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT 6>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@11150000 {
+		compatible = "rockchip,rk3228-tsadc";
+		reg = <0x11150000 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <0>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@30020000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		reg = <0x30020000 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <37500000>;
+		clock-freq-min-max = <400000 37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		bus-width = <8>;
+		default-sample-phase = <158>;
+		num-slots = <1>;
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@30200000 {
+		compatible = "rockchip,rk3228-gmac";
+		reg = <0x30200000 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			<&cru SCLK_MAC_TX>, <&cru SCLK_MAC_REF>,
+			<&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+			<&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			"mac_clk_tx", "clk_mac_ref",
+			"clk_mac_refout", "aclk_mac",
+			"pclk_mac";
+		resets = <&cru SRST_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x1000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3228-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@11110000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11110000 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@11120000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11120000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@11130000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11130000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@11140000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11140000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+						<1 25 RK_FUNC_2 &pcfg_pull_none>,
+						<1 26 RK_FUNC_2 &pcfg_pull_none>,
+						<1 27 RK_FUNC_2 &pcfg_pull_none>,
+						<1 28 RK_FUNC_2 &pcfg_pull_none>,
+						<1 29 RK_FUNC_2 &pcfg_pull_none>,
+						<1 30 RK_FUNC_2 &pcfg_pull_none>,
+						<1 31 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
+						<2 12 RK_FUNC_1 &pcfg_pull_none>,
+						<2 25 RK_FUNC_1 &pcfg_pull_none>,
+						<2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 17 RK_FUNC_1 &pcfg_pull_none>,
+						<2 16 RK_FUNC_1 &pcfg_pull_none>,
+						<2 21 RK_FUNC_2 &pcfg_pull_none>,
+						<2 20 RK_FUNC_2 &pcfg_pull_none>,
+						<2 11 RK_FUNC_1 &pcfg_pull_none>,
+						<2 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
+						<2 12 RK_FUNC_1 &pcfg_pull_none>,
+						<2 25 RK_FUNC_1 &pcfg_pull_none>,
+						<2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+						<2 17 RK_FUNC_1 &pcfg_pull_none>,
+						<2 16 RK_FUNC_1 &pcfg_pull_none>,
+						<2 8 RK_FUNC_1 &pcfg_pull_none>,
+						<2 15 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			phy_pins: phy-pins {
+				rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>,
+						<2 8 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+						<0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
+						<2 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
+						<0 7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s1 {
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>,
+						<0 9 RK_FUNC_1 &pcfg_pull_none>,
+						<0 11 RK_FUNC_1 &pcfg_pull_none>,
+						<0 12 RK_FUNC_1 &pcfg_pull_none>,
+						<0 13 RK_FUNC_1 &pcfg_pull_none>,
+						<0 14 RK_FUNC_1 &pcfg_pull_none>,
+						<1 2 RK_FUNC_1 &pcfg_pull_none>,
+						<1 4 RK_FUNC_1 &pcfg_pull_none>,
+						<1 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
+						<2 27 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
+						<1 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+						<1 19 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			uart2_cts: uart2-cts {
+				rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart2_rts: uart2-rts {
+				rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 43949a677..452ca2441 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -43,10 +43,26 @@
 
 / {
 	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
-};
 
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
+	vcc_lcd: vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		regulator-name = "vcc_lcd";
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_wl: vcc-wl {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwr>;
+		regulator-name = "vcc_wl";
+		vin-supply = <&vcc_18>;
+	};
 };
 
 &i2c0 {
@@ -119,8 +135,8 @@
 
 			vdd_log: REG3 {
 				regulator-name = "VDD_LOG";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 			};
 
@@ -133,7 +149,7 @@
 
 			vccio_sd: REG5 {
 				regulator-name = "VCCIO_SD";
-				regulator-min-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
@@ -152,7 +168,7 @@
 				regulator-always-on;
 			};
 
-			vcca_tp: REG8 {
+			vcc_tp: REG8 {
 				regulator-name = "VCCA_TP";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -189,3 +205,17 @@
 		};
 	};
 };
+
+&pinctrl {
+	lcd {
+		lcd_en: lcd-en  {
+			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 18eb6cb49..736b08b0b 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -43,17 +43,6 @@
 
 / {
 	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
-
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-		#clock-cells = <0>;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
 };
 
 &i2c0 {
@@ -244,19 +233,3 @@
 		};
 	};
 };
-
-&gmac {
-	phy-supply = <&vcc_phy>;
-	phy-mode = "rgmii";
-	clock_in_out = "input";
-	snps,reset-gpio = <&gpio4 7 0>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 1000000>;
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-	status = "ok";
-};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 844a6fb64..963365d12 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -38,11 +38,13 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "rk3288.dtsi"
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0x0 0x80000000>;
 	};
 
@@ -88,21 +90,26 @@
 		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
 	};
 
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button@0 {
+		power {
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
@@ -159,8 +166,11 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
 &emmc {
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
@@ -171,11 +181,6 @@
 	status = "okay";
 };
 
-&hdmi {
-	ddc-i2c-bus = <&i2c5>;
-	status = "okay";
-};
-
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -190,6 +195,27 @@
 	vqmmc-supply = <&vccio_sd>;
 };
 
+&gmac {
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 0b42372e4..114c90fb6 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -40,13 +40,23 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/input/input.h>
 #include "rk3288.dtsi"
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
 
+	dovdd_1v8: dovdd-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dovdd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc28_dvp>;
+	};
+
 	ext_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -62,14 +72,12 @@
 
 	keys: gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@0 {
-			gpio-key,wakeup = <1>;
+		power {
+			wakeup-source;
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pwr_key>;
 		};
@@ -95,7 +103,7 @@
 		};
 	};
 
-	vcc_sys: vsys-regulator {
+	vbat_wl: vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <5000000>;
@@ -159,6 +167,23 @@
 		regulator-always-on;
 		vin-supply = <&vcc_5v>;
 	};
+
+	/*
+	 * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
+	 * by the dvp_pwr pin.
+	 */
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_io>;
+	};
 };
 
 &cpu0 {
@@ -166,7 +191,6 @@
 };
 
 &emmc {
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
@@ -213,6 +237,8 @@
 		regulator-max-microvolt = <1350000>;
 		regulator-always-on;
 		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
 		vin-supply = <&vcc_sys>;
 	};
 
@@ -322,7 +348,7 @@
 				regulator-always-on;
 			};
 
-			vcc_18: REG11 {
+			vccio_wl: vcc_18: REG11 {
 				regulator-name = "vcc_18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -355,6 +381,21 @@
 	status = "okay";
 };
 
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca_33>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&dovdd_1v8>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
 &pinctrl {
 	pcfg_output_high: pcfg-output-high {
 		output-high;
@@ -364,12 +405,23 @@
 		output-low;
 	};
 
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
 	act8846 {
 		pwr_hold: pwr-hold {
 			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};
 
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	gmac {
 		phy_int: phy-int {
 			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -407,6 +459,25 @@
 	};
 
 	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
 		sdmmc_pwr: sdmmc-pwr {
 			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
@@ -435,14 +506,14 @@
 };
 
 &sdio0 {
-	broken-cd;
 	bus-width = <4>;
 	disable-wp;
 	non-removable;
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
-	vmmc-supply = <&vcc_18>;
+	vmmc-supply = <&vbat_wl>;
+	vqmmc-supply = <&vccio_wl>;
 	status = "okay";
 };
 
@@ -456,6 +527,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
 	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
new file mode 100644
index 000000000..24488421f
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -0,0 +1,472 @@
+/*
+ * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	model = "mqmaker MiQi";
+	compatible = "mqmaker,miqi", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		work {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			label = "miqi:green:user";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+		};
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>;
+		system-power-controller;
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_18: REG7 {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcc_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca_33>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	leds {
+		led_ctl: led-ctl {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The otg controller is the only system power source,
+	 * so needs to always stay in device mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index d582811fb..dda8d259b 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -41,7 +41,7 @@
  */
 
 /dts-v1/;
-
+#include <dt-bindings/input/input.h>
 #include "rk3288.dtsi"
 
 / {
@@ -49,6 +49,7 @@
 	compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
 
 	memory{
+		device_type = "memory";
 		reg = <0 0x80000000>;
 	};
 
@@ -61,19 +62,17 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button@0 {
+		power {
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
@@ -85,6 +84,26 @@
 		pinctrl-0 = <&ir_int>;
 	};
 
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -93,6 +112,31 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	/*
+	 * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
+	 * by the dvp_pwr pin.
+	 */
+	vcc18_dvp: vcc18-dvp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc18-dvp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc28_dvp>;
+	};
+
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_io>;
+	};
 };
 
 &cpu0 {
@@ -100,7 +144,6 @@
 };
 
 &emmc {
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
@@ -108,6 +151,8 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
 	status = "okay";
 };
 
@@ -120,6 +165,8 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
 };
 
@@ -296,22 +343,22 @@
 				};
 			};
 
-			vcca_codec: LDO_REG8 {
+			vcca_33: LDO_REG8 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcca_codec";
+				regulator-name = "vcca_33";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3300000>;
 				};
 			};
 
-			vcc_wl: SWITCH_REG1 {
+			vccio_wl: SWITCH_REG1 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-name = "vcc_wl";
+				regulator-name = "vccio_wl";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 				};
@@ -374,6 +421,21 @@
 	status = "okay";
 };
 
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca_33>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&vcc18_dvp>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
 &pinctrl {
 	ak8963 {
 		comp_int: comp-int {
@@ -387,6 +449,12 @@
 		};
 	};
 
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	ir {
 		ir_int: ir-int {
 			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -404,6 +472,12 @@
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &tsadc {
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
new file mode 100644
index 000000000..4b8a8adb2
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -0,0 +1,425 @@
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+	compatible = "netxeon,r89", "rockchip,rk3288";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_otg: vcc-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sdmmc: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sys-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: pmic@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "VDD_CPU";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: pmic@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "VDD_GPU";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+	};
+
+	act8846: pmic@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_wl: REG7 {
+				regulator-name = "VCC_WL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "VCC_LAN";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sdmmc>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
new file mode 100644
index 000000000..bb1f01e03
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -0,0 +1,303 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <150>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vccio_pmu>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins &phy_rst>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	rx_delay = <0x10>;
+	tx_delay = <0x30>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		system-power-controller;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-name = "vdd_gpu";
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcc_io>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&vcc_18>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vccio_pmu>;
+	gpio30-supply = <&vccio_pmu>;
+	gpio1830 = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emmc {
+			emmc_reset: emmc-reset {
+				rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	gmac {
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO  &pcfg_output_high>;
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
new file mode 100644
index 000000000..dd3ad2e93
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -0,0 +1,226 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-rock2-som.dtsi"
+
+/ {
+	model = "Radxa Rock 2 Square";
+	compatible = "radxa,rock2-square", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+			label = "rock2:green:state1";
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			label = "rock2:blue:state2";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_usb_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		/* Always on as the rockchip usb phy doesn't have a vbus-supply
+		 * property
+		 */
+		regulator-always-on;
+		regulator-name = "vcc_host";
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;	/* wp not hooked up */
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&gmac {
+	status = "ok";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
new file mode 100644
index 000000000..6d105914a
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
@@ -0,0 +1,101 @@
+/*
+ * Google Veyron (and derivatives) fragment for the  max98090 audio
+ * codec and analog headphone jack.
+ *
+ * Copyright 2016 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	sound {
+		compatible = "rockchip,rockchip-audio-max98090";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_det>, <&hp_det>;
+		rockchip,model = "VEYRON-I2S";
+		rockchip,i2s-controller = <&i2s>;
+		rockchip,audio-codec = <&max98090>;
+		rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
+		rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		rockchip,headset-codec = <&headsetcodec>;
+	};
+};
+
+&i2c2 {
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S0_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&int_codec>;
+	};
+};
+
+&i2c4 {
+	headsetcodec: ts3a227e@3b {
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts3a227e_int_l>;
+		ti,micbias = <7>;		/* MICBIAS = 2.8V */
+	};
+};
+
+&i2s {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc18_codec>;
+};
+
+&rk808 {
+	vcc10-supply = <&vcc33_sys>;
+
+	regulators {
+		vcc18_codec: LDO_REG6 {
+			regulator-name = "vcc18_codec";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	codec {
+		hp_det: hp-det {
+			rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		/*
+		 * HACK: We're going to _pull down_ this _active low_ interrupt
+		 * so that it never fires.  We don't need this interrupt because
+		 * we've got a ts3a227e chip but the driver requires it.
+		 */
+		int_codec: int-codec {
+			rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		mic_det: mic-det {
+			rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headset {
+		ts3a227e_int_l: ts3a227e-int-l {
+			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
new file mode 100644
index 000000000..cf5311d26
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -0,0 +1,139 @@
+/*
+ * Google Veyron Brain Rev 0 board device tree source
+ *
+ * Copyright 2014 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+
+/ {
+	model = "Google Brain";
+	compatible = "google,veyron-brain-rev0", "google,veyron-brain",
+		     "google,veyron", "rockchip,rk3288";
+
+	vcc33_sys: vcc33-sys {
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc33_io: vcc33_io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc33_sys>;
+		/* This is gated by vcc_18 too */
+	};
+
+	/* This turns on vbus for host2 and otg (dwc2) */
+	vcc5_host2: vcc5-host2-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_pwr_en>;
+		regulator-name = "vcc5_host2";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&pinctrl {
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb-host {
+		usb2_pwr_en: usb2-pwr-en {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ vcc6-supply;
+
+	regulators {
+		/* vcc33_io is sourced directly from vcc33_sys */
+		/delete-node/ LDO_REG1;
+
+		/* This is not a pwren anymore, but the real power supply */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-suspend-mem-disabled;
+		};
+
+		vcc18_hdmi: SWITCH_REG2 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-name = "vcc18_hdmi";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
new file mode 100644
index 000000000..ce1f87980
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -0,0 +1,333 @@
+/*
+ * Google Veyron (and derivatives) board device tree source
+ * Chromebook specific parts
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-analog-audio.dtsi"
+#include "rk3288-veyron-sdmmc.dtsi"
+
+/ {
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = &i2c_tunnel;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+		backlight-boot-off;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-delay-us = <10000>;
+	};
+
+	gpio-charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ac_present_ap>;
+	};
+
+	panel: panel {
+		compatible ="innolux,n116bge", "simple-panel";
+		status = "okay";
+		power-supply = <&vcc33_lcd>;
+		backlight = <&backlight>;
+
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
+	/* A non-regulated voltage from power supply or battery */
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vccsys";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc33_sys: vcc33-sys {
+		vin-supply = <&vccsys>;
+	};
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vccsys>;
+	};
+
+	/* This turns on vbus for host1 (dwc2) */
+	vcc5_host1: vcc5-host1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host1_pwr_en>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This turns on vbus for otg for host mode (dwc2) */
+	vcc5v_otg: vcc5v-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbotg_pwren_h>;
+		regulator-name = "vcc5_host2";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&edp {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_out_panel: endpoint {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&edp_phy {
+	status = "okay";
+};
+
+&gpio_keys {
+	pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
+	lid {
+		label = "Lid";
+		gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		wakeup-source;
+		linux,code = <0>; /* SW_LID */
+		linux,input-type = <5>; /* EV_SW */
+		debounce-interval = <1>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&rk808 {
+	vcc11-supply = <&vcc_5v>;
+
+	regulators {
+		vcc33_ccd: LDO_REG8 {
+			regulator-name = "vcc33_ccd";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		google,cros-ec-spi-pre-delay = <30>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_int>;
+		spi-max-frequency = <3000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int>;
+		vcc-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		ap_lid_int_l: ap-lid-int-l {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	charger {
+		ac_present_ap: ac-present-ap {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	cros-ec {
+		ec_int: ec-int {
+			rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	suspend {
+		suspend_l_wake: suspend-l-wake {
+			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		suspend_l_sleep: suspend-l-sleep {
+			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	trackpad {
+		trackpad_int: trackpad-int {
+			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb-host {
+		host1_pwr_en: host1-pwr-en {
+			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbotg_pwren_h: usbotg-pwren-h {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
new file mode 100644
index 000000000..3748abf56
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -0,0 +1,213 @@
+/*
+ * Google Veyron Jaq Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Jaq";
+	compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
+		     "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
+		     "google,veyron-jaq-rev1", "google,veyron-jaq",
+		     "google,veyron", "rockchip,rk3288";
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+};
+
+&backlight {
+	/* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */
+	brightness-levels = <
+		  0
+		  8   9  10  11  12  13  14  15
+		 16  17  18  19  20  21  22  23
+		 24  25  26  27  28  29  30  31
+		 32  33  34  35  36  37  38  39
+		 40  41  42  43  44  45  46  47
+		 48  49  50  51  52  53  54  55
+		 56  57  58  59  60  61  62  63
+		 64  65  66  67  68  69  70  71
+		 72  73  74  75  76  77  78  79
+		 80  81  82  83  84  85  86  87
+		 88  89  90  91  92  93  94  95
+		 96  97  98  99 100 101 102 103
+		104 105 106 107 108 109 110 111
+		112 113 114 115 116 117 118 119
+		120 121 122 123 124 125 126 127
+		128 129 130 131 132 133 134 135
+		136 137 138 139 140 141 142 143
+		144 145 146 147 148 149 150 151
+		152 153 154 155 156 157 158 159
+		160 161 162 163 164 165 166 167
+		168 169 170 171 172 173 174 175
+		176 177 178 179 180 181 182 183
+		184 185 186 187 188 189 190 191
+		192 193 194 195 196 197 198 199
+		200 201 202 203 204 205 206 207
+		208 209 210 211 212 213 214 215
+		216 217 218 219 220 221 222 223
+		224 225 226 227 228 229 230 231
+		232 233 234 235 236 237 238 239
+		240 241 242 243 244 245 246 247
+		248 249 250 251 252 253 254 255>;
+	power-supply = <&backlight_regulator>;
+};
+
+&panel {
+	power-supply = <&panel_regulator>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	regulators {
+		mic_vcc: LDO_REG2 {
+			regulator-name = "mic_vcc";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
new file mode 100644
index 000000000..f6b2eaaeb
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -0,0 +1,206 @@
+/*
+ * Google Veyron Jerry Rev 3+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Jerry";
+	compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+		     "google,veyron-jerry-rev3", "google,veyron-jerry",
+		     "google,veyron", "rockchip,rk3288";
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+};
+
+&backlight {
+	power-supply = <&backlight_regulator>;
+};
+
+&panel {
+	power-supply= <&panel_regulator>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>;
+
+	regulators {
+		mic_vcc: LDO_REG2 {
+			regulator-name = "mic_vcc";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/*
+	 * Trackpad pin control is shared between Elan and Synaptics devices
+	 * so we have to pull it up to the bus level.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_xfer &trackpad_int>;
+
+	trackpad@15 {
+		/*
+		 * Remove the inherited pinctrl settings to avoid clashing
+		 * with bus-wide ones.
+		 */
+		/delete-property/pinctrl-names;
+		/delete-property/pinctrl-0;
+	};
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		interrupt-parent = <&gpio7>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x2c>;
+		hid-descr-addr = <0x0020>;
+		vcc-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
new file mode 100644
index 000000000..f36f6f459
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -0,0 +1,250 @@
+/*
+ * Google Veyron Mickey Rev 0 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+
+/ {
+	model = "Google Mickey";
+	compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+		     "google,veyron-mickey-rev0", "google,veyron-mickey",
+		     "google,veyron", "rockchip,rk3288";
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc33_io: vcc33_io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc33_sys>;
+	};
+};
+
+&cpu_thermal {
+	/delete-node/ trips;
+	/delete-node/ cooling-maps;
+
+	trips {
+		cpu_alert_almost_warm: cpu_alert_almost_warm {
+			temperature = <63000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_warm: cpu_alert_warm {
+			temperature = <65000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_almost_hot: cpu_alert_almost_hot {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hot: cpu_alert_hot {
+			temperature = <82000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hotter: cpu_alert_hotter {
+			temperature = <84000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_very_hot: cpu_alert_very_hot {
+			temperature = <85000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/*
+		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
+		 * and don't let the GPU go faster than 400 MHz.  Note that we
+		 * won't throttle the GPU lower than 400 MHz due to CPU
+		 * heat--we'll let the GPU do the rest itself.
+		 */
+		cpu_warm_limit_cpu {
+			trip = <&cpu_alert_warm>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT 4>;
+		};
+
+		/*
+		 * Add some discrete steps to help throttling system deal
+		 * with the fact that there are two passive cooling devices:
+		 * the CPU and the GPU.
+		 *
+		 * - 1.2 GHz - 1.0 GHz (almost hot)
+		 * - 800 MHz           (hot)
+		 * - 800 MHz - 696 MHz (hotter)
+		 * - 696 MHz - min     (very hot)
+		 *
+		 * Note:
+		 * - 800 MHz appears to be a "sweet spot" for me.  I can run
+		 *   some pretty serious workload here and be happy.
+		 * - After 696 MHz we stop lowering voltage, so throttling
+		 *   past there is less effective.
+		 */
+		cpu_almost_hot_limit_cpu {
+			trip = <&cpu_alert_almost_hot>;
+			cooling-device =
+				<&cpu0 5 6>;
+		};
+		cpu_hot_limit_cpu {
+			trip = <&cpu_alert_hot>;
+			cooling-device =
+				<&cpu0 7 7>;
+		};
+		cpu_hotter_limit_cpu {
+			trip = <&cpu_alert_hotter>;
+			cooling-device =
+				<&cpu0 7 8>;
+		};
+		cpu_very_hot_limit_cpu {
+			trip = <&cpu_alert_very_hot>;
+			cooling-device =
+				<&cpu0 8 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&i2s {
+	status = "okay";
+	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ vcc6-supply;
+	/delete-property/ vcc12-supply;
+
+	vcc11-supply = <&vcc33_sys>;
+
+	regulators {
+		/* vcc33_io is sourced directly from vcc33_sys */
+		/delete-node/ LDO_REG1;
+		/delete-node/ LDO_REG7;
+
+		/* This is not a pwren anymore, but the real power supply */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-suspend-mem-disabled;
+		};
+
+		vcc18_lcd: LDO_REG8 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-name = "vcc18_lcd";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&pinctrl {
+	hdmi {
+		power_hdmi_on: power-hdmi-on {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&usb_host0_ehci {
+	status = "disabled";
+};
+
+&usb_host1 {
+	status = "disabled";
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&power_hdmi_on>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
new file mode 100644
index 000000000..f72d616d1
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -0,0 +1,290 @@
+/*
+ * Google Veyron Minnie Rev 0+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+
+/ {
+	model = "Google Minnie";
+	compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+		     "google,veyron-minnie-rev0", "google,veyron-minnie",
+		     "google,veyron", "rockchip,rk3288";
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+};
+
+&backlight {
+	/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
+	brightness-levels = <
+			  0   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+	power-supply = <&backlight_regulator>;
+};
+
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
+&gpio_keys {
+	pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
+
+	volum_down {
+		label = "Volum_down";
+		gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEDOWN>;
+		debounce-interval = <100>;
+	};
+
+	volum_up {
+		label = "Volum_up";
+		gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_VOLUMEUP>;
+		debounce-interval = <100>;
+	};
+};
+
+&i2c_tunnel {
+	battery: bq27500@55 {
+		compatible = "ti,bq27500";
+		reg = <0x55>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&vcc33_touch>;
+		vccio-supply = <&vcc33_touch>;
+	};
+};
+
+&panel {
+	compatible = "auo,b101ean01", "simple-panel";
+	power-supply= <&panel_regulator>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+
+	regulators {
+		vcc33_touch: LDO_REG2 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "vcc33_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc5v_touch: SWITCH_REG2 {
+			regulator-name = "vcc5v_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		volum_down_l: volum-down-l {
+			rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		volum_up_l: volum-up-l {
+			rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	prochot {
+		gpio_prochot: gpio-prochot {
+			rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touchscreen {
+		touch_int: touch-int {
+			rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		touch_rst: touch-rst {
+			rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
new file mode 100644
index 000000000..d44351ec2
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -0,0 +1,135 @@
+/*
+ * Google Veyron Pinky Rev 2 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Pinky";
+	compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+		     "google,veyron", "rockchip,rk3288";
+
+	/delete-node/emmc-pwrseq;
+};
+
+&emmc {
+	/*
+	 * Use a pullup instead of a drive since the output is 3.3V and
+	 * really should be 1.8V (oops).  The external pulldown will help
+	 * bring the voltage down if we only drive with a pullup here.
+	 * Therefore disable the powerseq (and actual reset) for pinky.
+	 */
+	/delete-property/mmc-pwrseq;
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
+};
+
+&edp {
+	/delete-property/pinctrl-names;
+	/delete-property/pinctrl-0;
+
+	force-hpd;
+};
+
+&gpio_keys {
+	pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
+
+	power {
+		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* Touchpad connector */
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+};
+
+&pinctrl {
+	buttons {
+		pwr_key_h: pwr-key-h {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_wp_gpio: sdmmc-wp-gpio {
+			rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rk808 {
+	regulators {
+		vcc18_lcd: SWITCH_REG2 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-name = "vcc18_lcd";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+		     &sdmmc_wp_gpio &sdmmc_bus4>;
+	wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+};
+
+&tsadc {
+	/* Some connection is flaky making the tsadc hang the system */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
new file mode 100644
index 000000000..fec076eb7
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -0,0 +1,127 @@
+/*
+ * Google Veyron (and derivatives) fragment for sdmmc cards
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&io_domains {
+	sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+	sdmmc {
+		/*
+		 * We run sdmmc at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		/*
+		 * Builtin CD line is hooked to ground to prevent JTAG at boot
+		 * (and also to get the voltage rail correct).
+		 * Configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't
+		 * think there's a card inserted
+		 */
+		sdmmc_cd_disabled: sdmmc-cd-disabled {
+			rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* This is where we actually hook up CD */
+		sdmmc_cd_gpio: sdmmc-cd-gpio {
+			rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk808 {
+	vcc9-supply = <&vcc_5v>;
+
+	regulators {
+		vccio_sd: LDO_REG4 {
+			regulator-name = "vccio_sd";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc33_sd: LDO_REG5 {
+			regulator-name = "vcc33_sd";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+	rockchip,default-sample-phase = <90>;
+	num-slots = <1>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc33_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
new file mode 100644
index 000000000..a0d033f6f
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -0,0 +1,179 @@
+/*
+ * Google Veyron Speedy Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Speedy";
+	compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+		     "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+};
+
+&backlight {
+	power-supply = <&backlight_regulator>;
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_alert1 {
+	temperature = <70000>;
+};
+
+&edp {
+	/delete-property/pinctrl-names;
+	/delete-property/pinctrl-0;
+
+	force-hpd;
+};
+
+&panel {
+	power-supply= <&panel_regulator>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>;
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
new file mode 100644
index 000000000..3dd2cca48
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -0,0 +1,577 @@
+/*
+ * Google Veyron (and derivatives) board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_l>;
+		power {
+			label = "Power";
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_warm_reset_h>;
+		priority = <200>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_5v: vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc33_sys: vcc33-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc50_hdmi: vcc50-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc50_hdmi";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+	operating-points = <
+		/* KHz    uV */
+		1800000 1400000
+		1704000 1350000
+		1608000 1300000
+		1512000 1250000
+		1416000 1200000
+		1200000 1100000
+		1008000 1050000
+		 816000 1000000
+		 696000  950000
+		 600000  900000
+		 408000  900000
+		 216000  900000
+		 126000  900000
+	>;
+};
+
+&emmc {
+	status = "okay";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	rockchip,default-sample-phase = <158>;
+	disable-wp;
+	mmc-hs200-1_8v;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
+	i2c-scl-rising-time-ns = <100>;		/* 45ns measured */
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		clock-output-names = "xin32k", "wifibt_32kin";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vcc33_sys>;
+		vcc2-supply = <&vcc33_sys>;
+		vcc3-supply = <&vcc33_sys>;
+		vcc4-supply = <&vcc33_sys>;
+		vcc6-supply = <&vcc_5v>;
+		vcc7-supply = <&vcc33_sys>;
+		vcc8-supply = <&vcc33_sys>;
+		vcc12-supply = <&vcc_18>;
+		vddio-supply = <&vcc33_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc135_ddr: DCDC_REG3 {
+				regulator-name = "vcc135_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/*
+			 * vcc_18 has several aliases.  (vcc18_flashio and
+			 * vcc18_wl).  We'll add those aliases here just to
+			 * make it easier to follow the schematic.  The signals
+			 * are actually hooked together and only separated for
+			 * power measurement purposes).
+			 */
+			vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/*
+			 * Note that both vcc33_io and vcc33_pmuio are always
+			 * powered together. To simplify the logic in the dts
+			 * we just refer to vcc33_io every time something is
+			 * powered from vcc33_pmuio. In fact, on later boards
+			 * (such as danger) they're the same net.
+			 */
+			vcc33_io: LDO_REG1 {
+				regulator-name = "vcc33_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd10_lcd_pwren_h: LDO_REG7 {
+				regulator-name = "vdd10_lcd_pwren_h";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc33_lcd: SWITCH_REG1 {
+				regulator-name = "vcc33_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
+	i2c-scl-rising-time-ns = <100>;		/* 40ns measured */
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 100kHz since 4.7k resistors don't rise fast enough */
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <50>;		/* 10ns measured */
+	i2c-scl-rising-time-ns = <800>;		/* 600ns measured */
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 11ns measured */
+	i2c-scl-rising-time-ns = <300>;		/* 225ns measured */
+};
+
+&i2c5 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <300>;
+	i2c-scl-rising-time-ns = <1000>;
+};
+
+&io_domains {
+	status = "okay";
+
+	bb-supply = <&vcc33_io>;
+	dvp-supply = <&vcc_18>;
+	flash0-supply = <&vcc18_flashio>;
+	gpio1830-supply = <&vcc33_io>;
+	gpio30-supply = <&vcc33_io>;
+	lcdc-supply = <&vcc33_lcd>;
+	wifi-supply = <&vcc18_wl>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sdio0 {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc33_sys>;
+	vqmmc-supply = <&vcc18_wl>;
+};
+
+&spi2 {
+	status = "okay";
+
+	rx-sample-delay-ns = <12>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
+&uart0 {
+	status = "okay";
+
+	/* We need to go faster than 24MHz, so adjust clock parents / rates */
+	assigned-clocks = <&cru SCLK_UART0>;
+	assigned-clock-rates = <48000000>;
+
+	/* Pins don't include flow control by default; add that in */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+
+	needs-reset-on-resume;
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+
+	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
+	assigned-clock-parents = <&usbphy0>;
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&global_pwroff
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&global_pwroff
+	>;
+
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	buttons {
+		pwr_key_l: pwr-key-l {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/*
+		 * We run eMMC at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		emmc_clk: emmc-clk {
+			rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc_cmd: emmc-cmd {
+			rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+					<3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	reboot {
+		ap_warm_reset_h: ap-warm-reset-h {
+			rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	recovery-switch {
+		rec_mode_l: rec-mode-l {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio0 {
+		wifi_enable_h: wifienable-h {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* NOTE: mislabelled on schematic; should be bt_enable_h */
+		bt_enable_l: bt-enable-l {
+			rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/*
+		 * We run sdio0 at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+					<4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+	};
+
+	tpm {
+		tpm_int_h: tpm-int-h {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	write-protect {
+		fw_wp_ap: fw-wp-ap {
+			rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 858efd0c8..91c4b3c7a 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -44,6 +44,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3288-cru.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/rk3288-power.h>
 #include "skeleton.dtsi"
 
 / {
@@ -52,6 +53,7 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		ethernet0 = &gmac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -78,6 +80,7 @@
 			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
 	cpus {
@@ -110,19 +113,19 @@
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 		};
-		cpu@501 {
+		cpu1: cpu@501 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x501>;
 			resets = <&cru SRST_CORE1>;
 		};
-		cpu@502 {
+		cpu2: cpu@502 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x502>;
 			resets = <&cru SRST_CORE2>;
 		};
-		cpu@503 {
+		cpu3: cpu@503 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x503>;
@@ -131,7 +134,7 @@
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -142,6 +145,7 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC2>;
 			clock-names = "apb_pclk";
 		};
@@ -152,6 +156,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -163,11 +168,32 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * The rk3288 cannot use the memory area above 0xfe000000
+		 * for dma operations for some reason. While there is
+		 * probably a better solution available somewhere, we
+		 * haven't found it yet and while devices with 2GB of ram
+		 * are not affected, this issue prevents 4GB from booting.
+		 * So to make these devices at least bootable, block
+		 * this area for the time being until the real solution
+		 * is found.
+		 */
+		dma-unusable@fe000000 {
+			reg = <0xfe000000 0x1000000>;
+		};
+	};
+
 	xin24m: oscillator {
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
@@ -201,8 +227,9 @@
 	sdmmc: dwmmc@ff0c0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		clock-freq-min-max = <400000 150000000>;
-		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
-		clock-names = "biu", "ciu";
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0xff0c0000 0x4000>;
@@ -212,8 +239,9 @@
 	sdio0: dwmmc@ff0d0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		clock-freq-min-max = <400000 150000000>;
-		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>;
-		clock-names = "biu", "ciu";
+		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
+			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0xff0d0000 0x4000>;
@@ -223,8 +251,9 @@
 	sdio1: dwmmc@ff0e0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		clock-freq-min-max = <400000 150000000>;
-		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>;
-		clock-names = "biu", "ciu";
+		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
+			 <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0xff0e0000 0x4000>;
@@ -234,8 +263,9 @@
 	emmc: dwmmc@ff0f0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		clock-freq-min-max = <400000 150000000>;
-		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
-		clock-names = "biu", "ciu";
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0xff0f0000 0x4000>;
@@ -249,6 +279,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 
@@ -415,7 +447,78 @@
 	};
 
 	thermal-zones {
-		#include "rk3288-thermal.dtsi"
+		reserve_thermal: reserve_thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+		};
+
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT 6>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu_thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 2>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
 	};
 
 	tsadc: tsadc@ff280000 {
@@ -426,8 +529,10 @@
 		clock-names = "tsadc", "apb_pclk";
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
-		pinctrl-names = "default";
-		pinctrl-0 = <&otp_out>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
 		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
@@ -436,8 +541,9 @@
 	gmac: ethernet@ff290000 {
 		compatible = "rockchip,rk3288-gmac";
 		reg = <0xff290000 0x10000>;
-		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "macirq";
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
 		rockchip,grf = <&grf>;
 		clocks = <&cru SCLK_MAC>,
 			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
@@ -447,6 +553,8 @@
 			"mac_clk_rx", "mac_clk_tx",
 			"clk_mac_ref", "clk_mac_refout",
 			"aclk_mac", "pclk_mac";
+		resets = <&cru SRST_MAC>;
+		reset-names = "stmmaceth";
 		status = "disabled";
 	};
 
@@ -590,8 +698,101 @@
 	};
 
 	pmu: power-management@ff730000 {
-		compatible = "rockchip,rk3288-pmu", "syscon";
+		compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
 		reg = <0xff730000 0x100>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3288-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			assigned-clocks = <&cru SCLK_EDP_24M>;
+			assigned-clock-parents = <&xin24m>;
+
+			/*
+			 * Note: Although SCLK_* are the working clocks
+			 * of device without including on the NOC, needed for
+			 * synchronous reset.
+			 *
+			 * The clocks on the which NOC:
+			 * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+			 * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+			 * ACLK_RGA is on ACLK_RGA_NIU.
+			 * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+			 *
+			 * Which clock are device clocks:
+			 *	clocks		devices
+			 *	*_IEP		IEP:Image Enhancement Processor
+			 *	*_ISP		ISP:Image Signal Processing
+			 *	*_VIP		VIP:Video Input Processor
+			 *	*_VOP*		VOP:Visual Output Processor
+			 *	*_RGA		RGA
+			 *	*_EDP*		EDP
+			 *	*_LVDS_*	LVDS
+			 *	*_HDMI		HDMI
+			 *	*_MIPI_*	MIPI
+			 */
+			pd_vio@RK3288_PD_VIO {
+				reg = <RK3288_PD_VIO>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru ACLK_ISP>,
+					 <&cru ACLK_RGA>,
+					 <&cru ACLK_VIP>,
+					 <&cru ACLK_VOP0>,
+					 <&cru ACLK_VOP1>,
+					 <&cru DCLK_VOP0>,
+					 <&cru DCLK_VOP1>,
+					 <&cru HCLK_IEP>,
+					 <&cru HCLK_ISP>,
+					 <&cru HCLK_RGA>,
+					 <&cru HCLK_VIP>,
+					 <&cru HCLK_VOP0>,
+					 <&cru HCLK_VOP1>,
+					 <&cru PCLK_EDP_CTRL>,
+					 <&cru PCLK_HDMI_CTRL>,
+					 <&cru PCLK_LVDS_PHY>,
+					 <&cru PCLK_MIPI_CSI>,
+					 <&cru PCLK_MIPI_DSI0>,
+					 <&cru PCLK_MIPI_DSI1>,
+					 <&cru SCLK_EDP_24M>,
+					 <&cru SCLK_EDP>,
+					 <&cru SCLK_ISP_JPE>,
+					 <&cru SCLK_ISP>,
+					 <&cru SCLK_RGA>;
+			};
+
+			/*
+			 * Note: The following 3 are HEVC(H.265) clocks,
+			 * and on the ACLK_HEVC_NIU (NOC).
+			 */
+			pd_hevc@RK3288_PD_HEVC {
+				reg = <RK3288_PD_HEVC>;
+				clocks = <&cru ACLK_HEVC>,
+					 <&cru SCLK_HEVC_CABAC>,
+					 <&cru SCLK_HEVC_CORE>;
+			};
+
+			/*
+			 * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+			 * (video endecoder & decoder) clocks that on the
+			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+			 */
+			pd_video@RK3288_PD_VIDEO {
+				reg = <RK3288_PD_VIDEO>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+			};
+
+			/*
+			 * Note: ACLK_GPU is the GPU clock,
+			 * and on the ACLK_GPU_NIU (NOC).
+			 */
+			pd_gpu@RK3288_PD_GPU {
+				reg = <RK3288_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+			};
+		};
 	};
 
 	sgrf: syscon@ff740000 {
@@ -618,8 +819,21 @@
 	};
 
 	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3288-grf", "syscon";
+		compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
 		reg = <0xff770000 0x1000>;
+
+		edp_phy: edp-phy {
+			compatible = "rockchip,rk3288-dp-phy";
+			clocks = <&cru SCLK_EDP_24M>;
+			clock-names = "24m";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3288-io-voltage-domain";
+			status = "disabled";
+		};
 	};
 
 	wdt: watchdog@ff800000 {
@@ -630,10 +844,25 @@
 		status = "disabled";
 	};
 
+	spdif: sound@ff88b0000 {
+		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
+		reg = <0xff8b0000 0x10000>;
+		#sound-dai-cells = <0>;
+		clock-names = "hclk", "mclk";
+		clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+		dmas = <&dmac_bus_s 3>;
+		dma-names = "tx";
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
 	i2s: i2s@ff890000 {
 		compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
 		reg = <0xff890000 0x10000>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
@@ -642,15 +871,30 @@
 		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
+		rockchip,playback-channels = <8>;
+		rockchip,capture-channels = <2>;
 		status = "disabled";
 	};
 
+	crypto: cypto-controller@ff8a0000 {
+		compatible = "rockchip,rk3288-crypto";
+		reg = <0xff8a0000 0x4000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+		resets = <&cru SRST_CRYPTO>;
+		reset-names = "crypto-rst";
+		status = "okay";
+	};
+
 	vopb: vop@ff930000 {
 		compatible = "rockchip,rk3288-vop";
 		reg = <0xff930000 0x19c>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
 		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopb_mmu>;
@@ -664,6 +908,16 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopb>;
 			};
+
+			vopb_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopb>;
+			};
+
+			vopb_out_mipi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
 		};
 	};
 
@@ -672,6 +926,7 @@
 		reg = <0xff930300 0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vopb_mmu";
+		power-domains = <&power RK3288_PD_VIO>;
 		#iommu-cells = <0>;
 		status = "disabled";
 	};
@@ -682,6 +937,7 @@
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
 		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopl_mmu>;
@@ -695,6 +951,16 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopl>;
 			};
+
+			vopl_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopl>;
+			};
+
+			vopl_out_mipi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
 		};
 	};
 
@@ -703,10 +969,71 @@
 		reg = <0xff940300 0x100>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vopl_mmu";
+		power-domains = <&power RK3288_PD_VIO>;
 		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
+	mipi_dsi: mipi@ff960000 {
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		power-domains = <&power RK3288_PD_VIO>;
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
+	edp: dp@ff970000 {
+		compatible = "rockchip,rk3288-dp";
+		reg = <0xff970000 0x4000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+		clock-names = "dp", "pclk";
+		phys = <&edp_phy>;
+		phy-names = "dp";
+		resets = <&cru SRST_EDP>;
+		reset-names = "dp";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+		};
+	};
+
 	hdmi: hdmi@ff980000 {
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0xff980000 0x20000>;
@@ -715,6 +1042,7 @@
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
 		clock-names = "iahb", "isfr";
+		power-domains = <&power RK3288_PD_VIO>;
 		status = "disabled";
 
 		ports {
@@ -746,6 +1074,19 @@
 		interrupts = <GIC_PPI 9 0xf04>;
 	};
 
+	efuse: efuse@ffb40000 {
+		compatible = "rockchip,rockchip-efuse";
+		reg = <0xffb40000 0x20>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE256>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
 	usbphy: phy {
 		compatible = "rockchip,rk3288-usb-phy";
 		rockchip,grf = <&grf>;
@@ -753,25 +1094,28 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy@320 {
 			#phy-cells = <0>;
 			reg = <0x320>;
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy@334 {
 			#phy-cells = <0>;
 			reg = <0x334>;
 			clocks = <&cru SCLK_OTGPHY1>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
-		usbphy2: usb-phy2 {
+		usbphy2: usb-phy@348 {
 			#phy-cells = <0>;
 			reg = <0x348>;
 			clocks = <&cru SCLK_OTGPHY2>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 	};
 
@@ -900,6 +1244,13 @@
 			#interrupt-cells = <2>;
 		};
 
+		hdmi {
+			hdmi_ddc: hdmi-ddc {
+				rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
+						<7 20 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
 		pcfg_pull_up: pcfg-pull-up {
 			bias-pull-up;
 		};
@@ -935,6 +1286,12 @@
 			};
 		};
 
+		edp {
+			edp_hpd: edp-hpd {
+				rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
@@ -997,7 +1354,7 @@
 				rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
-			sdmmc_cd: sdmcc-cd {
+			sdmmc_cd: sdmmc-cd {
 				rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
@@ -1188,7 +1545,7 @@
 			};
 
 			uart0_cts: uart0-cts {
-				rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
 			uart0_rts: uart0-rts {
@@ -1203,7 +1560,7 @@
 			};
 
 			uart1_cts: uart1-cts {
-				rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
 			uart1_rts: uart1-rts {
@@ -1226,7 +1583,7 @@
 			};
 
 			uart3_cts: uart3-cts {
-				rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
 			uart3_rts: uart3-rts {
@@ -1241,7 +1598,7 @@
 			};
 
 			uart4_cts: uart4-cts {
-				rockchip,pins = <5 14 3 &pcfg_pull_none>;
+				rockchip,pins = <5 14 3 &pcfg_pull_up>;
 			};
 
 			uart4_rts: uart4-rts {
@@ -1250,6 +1607,10 @@
 		};
 
 		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
 			otp_out: otp-out {
 				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
 			};
@@ -1311,5 +1672,11 @@
 						<4 3 3 &pcfg_pull_none>;
 			};
 		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index a2ae9f324..e2cd683b4 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -49,6 +49,7 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		ethernet0 = &emac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -66,7 +67,7 @@
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -77,6 +78,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 		};
@@ -87,6 +89,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -98,6 +101,7 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA2>;
 			clock-names = "apb_pclk";
 		};
@@ -172,6 +176,13 @@
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG0>;
 		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		g-use-dma;
+		phys = <&usbphy0>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -181,6 +192,9 @@
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG1>;
 		clock-names = "otg";
+		dr_mode = "host";
+		phys = <&usbphy1>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -385,6 +399,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index a5184ff56..80f007550 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -25,7 +25,7 @@
 		#size-cells = <0>;
 
 		cpu {
-			compatible = "arm,arm926ejs";
+			compatible = "arm,arm926ej-s";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index f00cea7ac..da24ab570 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -46,7 +46,7 @@
 			regulator-name = "V_TF_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpios = <&mp05 4 0>;
+			gpio = <&mp05 4 0>;
 			enable-active-high;
 		};
 
@@ -257,7 +257,7 @@
 			linux,code = <KEY_POWER>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
@@ -268,7 +268,7 @@
 
 &keypad {
 	linux,input-no-autorepeat;
-	linux,input-wakeup;
+	wakeup-source;
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <3>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index a3d4643b2..0a33d4021 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -47,7 +47,7 @@
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			reg = <0>;
-			gpios = <&mp05 4 0>;
+			gpio = <&mp05 4 0>;
 			enable-active-high;
 		};
 
@@ -73,7 +73,7 @@
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			reg = <3>;
-			gpios = <&gpj1 3 0>;
+			gpio = <&gpj1 3 0>;
 			enable-active-high;
 		};
 	};
@@ -239,7 +239,7 @@
 			linux,code = <KEY_POWER>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
@@ -250,7 +250,7 @@
 
 &keypad {
 	linux,input-no-autorepeat;
-	linux,input-wakeup;
+	wakeup-source;
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <3>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
index da7d210df..9eb6aff3e 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -59,7 +59,7 @@
 
 &keypad {
 	linux,input-no-autorepeat;
-	linux,input-wakeup;
+	wakeup-source;
 	samsung,keypad-num-rows = <8>;
 	samsung,keypad-num-columns = <8>;
 	pinctrl-names = "default";
@@ -197,7 +197,7 @@
 	display-timings {
 		native-mode = <&timing0>;
 
-		timing0: timing@0 {
+		timing0: timing {
 			/* 800x480@60Hz */
 			clock-frequency = <24373920>;
 			hactive = <800>;
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 8344a0ee2..ffc36bd24 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -130,7 +130,7 @@
 		amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			ranges;
 
 			pdma0: dma@e0900000 {
diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h
new file mode 100644
index 000000000..8a394f336
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d2-pinfunc.h
@@ -0,0 +1,880 @@
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__QSPI0_SCK		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__D0			PINMUX_PIN(PIN_PA0, 6, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__QSPI0_CS		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__D1			PINMUX_PIN(PIN_PA1, 6, 2)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_DAT0		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__QSPI0_IO0		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__D2			PINMUX_PIN(PIN_PA2, 6, 2)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT1		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__QSPI0_IO1		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D3			PINMUX_PIN(PIN_PA3, 6, 2)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT2		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__QSPI0_IO2		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D4			PINMUX_PIN(PIN_PA4, 6, 2)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT3		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__QSPI0_IO3		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__D5			PINMUX_PIN(PIN_PA5, 6, 2)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT4		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__QSPI1_SCK		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__TIOA5			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA6, 5, 1)
+#define PIN_PA6__D6			PINMUX_PIN(PIN_PA6, 6, 2)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT5		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__QSPI1_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__TIOB5			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA7, 5, 1)
+#define PIN_PA7__D7			PINMUX_PIN(PIN_PA7, 6, 2)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT6		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__QSPI1_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__TCLK5			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA8, 5, 1)
+#define PIN_PA8__NWE_NANDWE		PINMUX_PIN(PIN_PA8, 6, 2)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT7		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__QSPI1_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__TIOA4			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__NCS3			PINMUX_PIN(PIN_PA9, 6, 2)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_RSTN		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__QSPI1_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__TIOB4			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__A21_NANDALE		PINMUX_PIN(PIN_PA10, 6, 2)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_VDDSEL		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__QSPI1_CS		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__TCLK4			PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__A22_NANDCLE		PINMUX_PIN(PIN_PA11, 6, 2)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__IRQ			PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD_NANDOE		PINMUX_PIN(PIN_PA12, 6, 2)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_CD		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA13, 5, 1)
+#define PIN_PA13__D8			PINMUX_PIN(PIN_PA13, 6, 2)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SPI0_SPCK		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__TK1			PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__QSPI0_SCK		PINMUX_PIN(PIN_PA14, 3, 2)
+#define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
+#define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
+#define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__QSPI0_CS		PINMUX_PIN(PIN_PA15, 3, 2)
+#define PIN_PA15__I2SC1_CK		PINMUX_PIN(PIN_PA15, 4, 2)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA15__D10			PINMUX_PIN(PIN_PA15, 6, 2)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__SPI0_MISO		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__TD1			PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__QSPI0_IO0		PINMUX_PIN(PIN_PA16, 3, 2)
+#define PIN_PA16__I2SC1_WS		PINMUX_PIN(PIN_PA16, 4, 2)
+#define PIN_PA16__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA16__D11			PINMUX_PIN(PIN_PA16, 6, 2)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__SPI0_NPCS0		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__RD1			PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__QSPI0_IO1		PINMUX_PIN(PIN_PA17, 3, 2)
+#define PIN_PA17__I2SC1_DI0		PINMUX_PIN(PIN_PA17, 4, 2)
+#define PIN_PA17__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA17__D12			PINMUX_PIN(PIN_PA17, 6, 2)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__SPI0_NPCS1		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__RK1			PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__QSPI0_IO2		PINMUX_PIN(PIN_PA18, 3, 2)
+#define PIN_PA18__I2SC1_DO0		PINMUX_PIN(PIN_PA18, 4, 2)
+#define PIN_PA18__SDMMC1_DAT0		PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA18__D13			PINMUX_PIN(PIN_PA18, 6, 2)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__SPI0_NPCS2		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__RF1			PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__QSPI0_IO3		PINMUX_PIN(PIN_PA19, 3, 2)
+#define PIN_PA19__TIOA0			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__SDMMC1_DAT1		PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA19__D14			PINMUX_PIN(PIN_PA19, 6, 2)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__SPI0_NPCS3		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__TIOB0			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__SDMMC1_DAT2		PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA20__D15			PINMUX_PIN(PIN_PA20, 6, 2)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__IRQ			PINMUX_PIN(PIN_PA21, 1, 2)
+#define PIN_PA21__PCK2			PINMUX_PIN(PIN_PA21, 2, 3)
+#define PIN_PA21__TCLK0			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__SDMMC1_DAT3		PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA21__NANDRDY		PINMUX_PIN(PIN_PA21, 6, 2)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__D0			PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__TCK			PINMUX_PIN(PIN_PA22, 3, 4)
+#define PIN_PA22__SPI1_SPCK		PINMUX_PIN(PIN_PA22, 4, 2)
+#define PIN_PA22__SDMMC1_CK		PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA22__QSPI0_SCK		PINMUX_PIN(PIN_PA22, 6, 3)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__D1			PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__TDI			PINMUX_PIN(PIN_PA23, 3, 4)
+#define PIN_PA23__SPI1_MOSI		PINMUX_PIN(PIN_PA23, 4, 2)
+#define PIN_PA23__QSPI0_CS		PINMUX_PIN(PIN_PA23, 6, 3)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__D2			PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__TDO			PINMUX_PIN(PIN_PA24, 3, 4)
+#define PIN_PA24__SPI1_MISO		PINMUX_PIN(PIN_PA24, 4, 2)
+#define PIN_PA24__QSPI0_IO0		PINMUX_PIN(PIN_PA24, 6, 3)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__D3			PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__TMS			PINMUX_PIN(PIN_PA25, 3, 4)
+#define PIN_PA25__SPI1_NPCS0		PINMUX_PIN(PIN_PA25, 4, 2)
+#define PIN_PA25__QSPI0_IO1		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__D4			PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__NTRST			PINMUX_PIN(PIN_PA26, 3, 4)
+#define PIN_PA26__SPI1_NPCS1		PINMUX_PIN(PIN_PA26, 4, 2)
+#define PIN_PA26__QSPI0_IO2		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__TIOA1			PINMUX_PIN(PIN_PA27, 1, 2)
+#define PIN_PA27__D5			PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__SPI0_NPCS2		PINMUX_PIN(PIN_PA27, 3, 2)
+#define PIN_PA27__SPI1_NPCS2		PINMUX_PIN(PIN_PA27, 4, 2)
+#define PIN_PA27__SDMMC1_RSTN		PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__QSPI0_IO3		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__TIOB1			PINMUX_PIN(PIN_PA28, 1, 2)
+#define PIN_PA28__D6			PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__SPI0_NPCS3		PINMUX_PIN(PIN_PA28, 3, 2)
+#define PIN_PA28__SPI1_NPCS3		PINMUX_PIN(PIN_PA28, 4, 2)
+#define PIN_PA28__SDMMC1_CMD		PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__CLASSD_L0		PINMUX_PIN(PIN_PA28, 6, 1)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__TCLK1			PINMUX_PIN(PIN_PA29, 1, 2)
+#define PIN_PA29__D7			PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__SPI0_NPCS1		PINMUX_PIN(PIN_PA29, 3, 2)
+#define PIN_PA29__SDMMC1_WP		PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__CLASSD_L1		PINMUX_PIN(PIN_PA29, 6, 1)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__NWE_NANDWE		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__SPI0_NPCS0		PINMUX_PIN(PIN_PA30, 3, 2)
+#define PIN_PA30__PWMH0			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__SDMMC1_CD		PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__CLASSD_L2		PINMUX_PIN(PIN_PA30, 6, 1)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__NCS3			PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__SPI0_MISO		PINMUX_PIN(PIN_PA31, 3, 2)
+#define PIN_PA31__PWML0			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__CLASSD_L3		PINMUX_PIN(PIN_PA31, 6, 1)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__A21_NANDALE		PINMUX_PIN(PIN_PB0, 2, 1)
+#define PIN_PB0__SPI0_MOSI		PINMUX_PIN(PIN_PB0, 3, 2)
+#define PIN_PB0__PWMH1			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__A22_NANDCLE		PINMUX_PIN(PIN_PB1, 2, 1)
+#define PIN_PB1__SPI0_SPCK		PINMUX_PIN(PIN_PB1, 3, 2)
+#define PIN_PB1__PWML1			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__CLASSD_R0		PINMUX_PIN(PIN_PB1, 6, 1)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__NRD_NANDOE		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__PWMFI0			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__CLASSD_R1		PINMUX_PIN(PIN_PB2, 6, 1)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__URXD4			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__IRQ			PINMUX_PIN(PIN_PB3, 3, 3)
+#define PIN_PB3__PWMEXTRG0		PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB3__CLASSD_R2		PINMUX_PIN(PIN_PB3, 6, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__UTXD4			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__FIQ			PINMUX_PIN(PIN_PB4, 3, 4)
+#define PIN_PB4__CLASSD_R3		PINMUX_PIN(PIN_PB4, 6, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TCLK2			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PWMH2			PINMUX_PIN(PIN_PB5, 3, 1)
+#define PIN_PB5__QSPI1_SCK		PINMUX_PIN(PIN_PB5, 4, 2)
+#define PIN_PB5__GTSUCOMP		PINMUX_PIN(PIN_PB5, 6, 3)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__TIOA2			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PWML2			PINMUX_PIN(PIN_PB6, 3, 1)
+#define PIN_PB6__QSPI1_CS		PINMUX_PIN(PIN_PB6, 4, 2)
+#define PIN_PB6__GTXER			PINMUX_PIN(PIN_PB6, 6, 3)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TIOB2			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__PWMH3			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__QSPI1_IO0		PINMUX_PIN(PIN_PB7, 4, 2)
+#define PIN_PB7__GRXCK			PINMUX_PIN(PIN_PB7, 6, 3)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__TCLK3			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__PWML3			PINMUX_PIN(PIN_PB8, 3, 1)
+#define PIN_PB8__QSPI1_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+#define PIN_PB8__GCRS			PINMUX_PIN(PIN_PB8, 6, 3)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__TIOA3			PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__D14			PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PWMFI1			PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__QSPI1_IO2		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__GCOL			PINMUX_PIN(PIN_PB9, 6, 3)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__TIOB3			PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__D15			PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__QSPI1_IO3		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__GRX2			PINMUX_PIN(PIN_PB10, 6, 3)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__LCDDAT0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__A0_NBS0		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__URXD3			PINMUX_PIN(PIN_PB11, 3, 3)
+#define PIN_PB11__PDMIC_DAT		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__GRX3			PINMUX_PIN(PIN_PB11, 6, 3)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__LCDDAT1		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__A1			PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__UTXD3			PINMUX_PIN(PIN_PB12, 3, 3)
+#define PIN_PB12__PDMIC_CLK		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__GTX2			PINMUX_PIN(PIN_PB12, 6, 3)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__LCDDAT2		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__A2			PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__PCK1			PINMUX_PIN(PIN_PB13, 3, 3)
+#define PIN_PB13__GTX3			PINMUX_PIN(PIN_PB13, 6, 3)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__LCDDAT3		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__A3			PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__TK1			PINMUX_PIN(PIN_PB14, 3, 2)
+#define PIN_PB14__I2SC1_MCK		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 5, 3)
+#define PIN_PB14__GTXCK			PINMUX_PIN(PIN_PB14, 6, 3)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__LCDDAT4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__A4			PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__TF1			PINMUX_PIN(PIN_PB15, 3, 2)
+#define PIN_PB15__I2SC1_CK		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__QSPI1_CS		PINMUX_PIN(PIN_PB15, 5, 3)
+#define PIN_PB15__GTXEN			PINMUX_PIN(PIN_PB15, 6, 3)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__LCDDAT5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__A5			PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__TD1			PINMUX_PIN(PIN_PB16, 3, 2)
+#define PIN_PB16__I2SC1_WS		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__QSPI1_IO0		PINMUX_PIN(PIN_PB16, 5, 3)
+#define PIN_PB16__GRXDV			PINMUX_PIN(PIN_PB16, 6, 3)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__LCDDAT6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__A6			PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__RD1			PINMUX_PIN(PIN_PB17, 3, 2)
+#define PIN_PB17__I2SC1_DI0		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__QSPI1_IO1		PINMUX_PIN(PIN_PB17, 5, 3)
+#define PIN_PB17__GRXER			PINMUX_PIN(PIN_PB17, 6, 3)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__LCDDAT7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__A7			PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__RK1			PINMUX_PIN(PIN_PB18, 3, 2)
+#define PIN_PB18__I2SC1_DO0		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__QSPI1_IO2		PINMUX_PIN(PIN_PB18, 5, 3)
+#define PIN_PB18__GRX0			PINMUX_PIN(PIN_PB18, 6, 3)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__LCDDAT8		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__A8			PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__RF1			PINMUX_PIN(PIN_PB19, 3, 2)
+#define PIN_PB19__TIOA3			PINMUX_PIN(PIN_PB19, 4, 2)
+#define PIN_PB19__QSPI1_IO3		PINMUX_PIN(PIN_PB19, 5, 3)
+#define PIN_PB19__GRX1			PINMUX_PIN(PIN_PB19, 6, 3)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__LCDDAT9		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__A9			PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__TK0			PINMUX_PIN(PIN_PB20, 3, 1)
+#define PIN_PB20__TIOB3			PINMUX_PIN(PIN_PB20, 4, 2)
+#define PIN_PB20__PCK1			PINMUX_PIN(PIN_PB20, 5, 4)
+#define PIN_PB20__GTX0			PINMUX_PIN(PIN_PB20, 6, 3)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__LCDDAT10		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__A10			PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__TF0			PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__TCLK3			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB21, 5, 3)
+#define PIN_PB21__GTX1			PINMUX_PIN(PIN_PB21, 6, 3)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__LCDDAT11		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__A11			PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__TDO			PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TIOA2			PINMUX_PIN(PIN_PB22, 4, 2)
+#define PIN_PB22__FLEXCOM3_IO1		PINMUX_PIN(PIN_PB22, 5, 3)
+#define PIN_PB22__GMDC			PINMUX_PIN(PIN_PB22, 6, 3)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__LCDDAT12		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__A12			PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__RD0			PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__TIOB2			PINMUX_PIN(PIN_PB23, 4, 2)
+#define PIN_PB23__FLEXCOM3_IO0		PINMUX_PIN(PIN_PB23, 5, 3)
+#define PIN_PB23__GMDIO			PINMUX_PIN(PIN_PB23, 6, 3)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__LCDDAT13		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__A13			PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__RK0			PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__TCLK2			PINMUX_PIN(PIN_PB24, 4, 2)
+#define PIN_PB24__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB24, 5, 3)
+#define PIN_PB24__ISC_D10		PINMUX_PIN(PIN_PB24, 6, 3)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__LCDDAT14		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__A14			PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__RF0			PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB25, 5, 3)
+#define PIN_PB25__ISC_D11		PINMUX_PIN(PIN_PB25, 6, 3)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__LCDDAT15		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__A15			PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__URXD0			PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PDMIC_DAT		PINMUX_PIN(PIN_PB26, 4, 1)
+#define PIN_PB26__ISC_D0		PINMUX_PIN(PIN_PB26, 6, 3)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__LCDDAT16		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__A16			PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__UTXD0			PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PDMIC_CLK		PINMUX_PIN(PIN_PB27, 4, 1)
+#define PIN_PB27__ISC_D1		PINMUX_PIN(PIN_PB27, 6, 3)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__LCDDAT17		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__A17			PINMUX_PIN(PIN_PB28, 2, 1)
+#define PIN_PB28__FLEXCOM0_IO0		PINMUX_PIN(PIN_PB28, 3, 1)
+#define PIN_PB28__TIOA5			PINMUX_PIN(PIN_PB28, 4, 2)
+#define PIN_PB28__ISC_D2		PINMUX_PIN(PIN_PB28, 6, 3)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__LCDDAT18		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__A18			PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM0_IO1		PINMUX_PIN(PIN_PB29, 3, 1)
+#define PIN_PB29__TIOB5			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__ISC_D3		PINMUX_PIN(PIN_PB29, 7, 3)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__LCDDAT19		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__A19			PINMUX_PIN(PIN_PB30, 2, 1)
+#define PIN_PB30__FLEXCOM0_IO2		PINMUX_PIN(PIN_PB30, 3, 1)
+#define PIN_PB30__TCLK5			PINMUX_PIN(PIN_PB30, 4, 2)
+#define PIN_PB30__ISC_D4		PINMUX_PIN(PIN_PB30, 6, 3)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__LCDDAT20		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__A20			PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM0_IO3		PINMUX_PIN(PIN_PB31, 3, 1)
+#define PIN_PB31__TWD0			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__ISC_D5		PINMUX_PIN(PIN_PB31, 6, 3)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__LCDDAT21		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__A23			PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC0, 3, 1)
+#define PIN_PC0__TWCK0			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__ISC_D6			PINMUX_PIN(PIN_PC0, 6, 3)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__LCDDAT22		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__A24			PINMUX_PIN(PIN_PC1, 2, 1)
+#define PIN_PC1__CANTX0			PINMUX_PIN(PIN_PC1, 3, 1)
+#define PIN_PC1__SPI1_SPCK		PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__I2SC0_CK		PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__ISC_D7			PINMUX_PIN(PIN_PC1, 6, 3)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__LCDDAT23		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__A25			PINMUX_PIN(PIN_PC2, 2, 1)
+#define PIN_PC2__CANRX0			PINMUX_PIN(PIN_PC2, 3, 1)
+#define PIN_PC2__SPI1_MOSI		PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__I2SC0_MCK		PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__ISC_D8			PINMUX_PIN(PIN_PC2, 6, 3)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__LCDPWM			PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__NWAIT			PINMUX_PIN(PIN_PC3, 2, 1)
+#define PIN_PC3__TIOA1			PINMUX_PIN(PIN_PC3, 3, 1)
+#define PIN_PC3__SPI1_MISO		PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__I2SC0_WS		PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__ISC_D9			PINMUX_PIN(PIN_PC3, 6, 3)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__LCDDISP		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__NWR1_NBS1		PINMUX_PIN(PIN_PC4, 2, 1)
+#define PIN_PC4__TIOB1			PINMUX_PIN(PIN_PC4, 3, 1)
+#define PIN_PC4__SPI1_NPCS0		PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__I2SC0_DI0		PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__ISC_PCK		PINMUX_PIN(PIN_PC4, 6, 3)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__LCDVSYNC		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__NCS0			PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__TCLK1			PINMUX_PIN(PIN_PC5, 3, 1)
+#define PIN_PC5__SPI1_NPCS1		PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__I2SC0_DO0		PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__ISC_VSYNC		PINMUX_PIN(PIN_PC5, 6, 3)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__LCDHSYNC		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__NCS1			PINMUX_PIN(PIN_PC6, 2, 1)
+#define PIN_PC6__TWD1			PINMUX_PIN(PIN_PC6, 3, 1)
+#define PIN_PC6__SPI1_NPCS2		PINMUX_PIN(PIN_PC6, 4, 1)
+#define PIN_PC6__ISC_HSYNC		PINMUX_PIN(PIN_PC6, 6, 3)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__LCDPCK			PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__NCS2			PINMUX_PIN(PIN_PC7, 2, 1)
+#define PIN_PC7__TWCK1			PINMUX_PIN(PIN_PC7, 3, 1)
+#define PIN_PC7__SPI1_NPCS3		PINMUX_PIN(PIN_PC7, 4, 1)
+#define PIN_PC7__URXD1			PINMUX_PIN(PIN_PC7, 5, 2)
+#define PIN_PC7__ISC_MCK		PINMUX_PIN(PIN_PC7, 6, 3)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__LCDDEN			PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__NANDRDY		PINMUX_PIN(PIN_PC8, 2, 1)
+#define PIN_PC8__FIQ			PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__PCK0			PINMUX_PIN(PIN_PC8, 4, 3)
+#define PIN_PC8__UTXD1			PINMUX_PIN(PIN_PC8, 5, 2)
+#define PIN_PC8__ISC_FIELD		PINMUX_PIN(PIN_PC8, 6, 3)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__FIQ			PINMUX_PIN(PIN_PC9, 1, 3)
+#define PIN_PC9__GTSUCOMP		PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__TIOA4			PINMUX_PIN(PIN_PC9, 4, 2)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__LCDDAT2		PINMUX_PIN(PIN_PC10, 1, 2)
+#define PIN_PC10__GTXCK			PINMUX_PIN(PIN_PC10, 2, 1)
+#define PIN_PC10__ISC_D1		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__TIOB4			PINMUX_PIN(PIN_PC10, 4, 2)
+#define PIN_PC10__CANTX0		PINMUX_PIN(PIN_PC10, 5, 2)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__LCDDAT3		PINMUX_PIN(PIN_PC11, 1, 2)
+#define PIN_PC11__GTXEN			PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__ISC_D2		PINMUX_PIN(PIN_PC11, 3, 1)
+#define PIN_PC11__TCLK4			PINMUX_PIN(PIN_PC11, 4, 2)
+#define PIN_PC11__CANRX0		PINMUX_PIN(PIN_PC11, 5, 2)
+#define PIN_PC11__A0_NBS0		PINMUX_PIN(PIN_PC11, 6, 2)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__LCDDAT4		PINMUX_PIN(PIN_PC12, 1, 2)
+#define PIN_PC12__GRXDV			PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__ISC_D3		PINMUX_PIN(PIN_PC12, 3, 1)
+#define PIN_PC12__URXD3			PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__TK0			PINMUX_PIN(PIN_PC12, 5, 2)
+#define PIN_PC12__A1			PINMUX_PIN(PIN_PC12, 6, 2)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__LCDDAT5		PINMUX_PIN(PIN_PC13, 1, 2)
+#define PIN_PC13__GRXER			PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__ISC_D4		PINMUX_PIN(PIN_PC13, 3, 1)
+#define PIN_PC13__UTXD3			PINMUX_PIN(PIN_PC13, 4, 1)
+#define PIN_PC13__TF0			PINMUX_PIN(PIN_PC13, 5, 2)
+#define PIN_PC13__A2			PINMUX_PIN(PIN_PC13, 6, 2)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__LCDDAT6		PINMUX_PIN(PIN_PC14, 1, 2)
+#define PIN_PC14__GRX0			PINMUX_PIN(PIN_PC14, 2, 1)
+#define PIN_PC14__ISC_D5		PINMUX_PIN(PIN_PC14, 3, 1)
+#define PIN_PC14__TDO			PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__A3			PINMUX_PIN(PIN_PC14, 6, 2)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__LCDDAT7		PINMUX_PIN(PIN_PC15, 1, 2)
+#define PIN_PC15__GRX1			PINMUX_PIN(PIN_PC15, 2, 1)
+#define PIN_PC15__ISC_D6		PINMUX_PIN(PIN_PC15, 3, 1)
+#define PIN_PC15__RD0			PINMUX_PIN(PIN_PC15, 5, 2)
+#define PIN_PC15__A4			PINMUX_PIN(PIN_PC15, 6, 2)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__LCDDAT10		PINMUX_PIN(PIN_PC16, 1, 2)
+#define PIN_PC16__GTX0			PINMUX_PIN(PIN_PC16, 2, 1)
+#define PIN_PC16__ISC_D7		PINMUX_PIN(PIN_PC16, 3, 1)
+#define PIN_PC16__RK0			PINMUX_PIN(PIN_PC16, 5, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 6, 2)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__LCDDAT11		PINMUX_PIN(PIN_PC17, 1, 2)
+#define PIN_PC17__GTX1			PINMUX_PIN(PIN_PC17, 2, 1)
+#define PIN_PC17__ISC_D8		PINMUX_PIN(PIN_PC17, 3, 1)
+#define PIN_PC17__RF0			PINMUX_PIN(PIN_PC17, 5, 2)
+#define PIN_PC17__A6			PINMUX_PIN(PIN_PC17, 6, 2)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__LCDDAT12		PINMUX_PIN(PIN_PC18, 1, 2)
+#define PIN_PC18__GMDC			PINMUX_PIN(PIN_PC18, 2, 1)
+#define PIN_PC18__ISC_D9		PINMUX_PIN(PIN_PC18, 3, 1)
+#define PIN_PC18__FLEXCOM3_IO2		PINMUX_PIN(PIN_PC18, 5, 2)
+#define PIN_PC18__A7			PINMUX_PIN(PIN_PC18, 6, 2)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__LCDDAT13		PINMUX_PIN(PIN_PC19, 1, 2)
+#define PIN_PC19__GMDIO			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__ISC_D10		PINMUX_PIN(PIN_PC19, 3, 1)
+#define PIN_PC19__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC19, 5, 2)
+#define PIN_PC19__A8			PINMUX_PIN(PIN_PC19, 6, 2)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__LCDDAT14		PINMUX_PIN(PIN_PC20, 1, 2)
+#define PIN_PC20__GRXCK			PINMUX_PIN(PIN_PC20, 2, 1)
+#define PIN_PC20__ISC_D11		PINMUX_PIN(PIN_PC20, 3, 1)
+#define PIN_PC20__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC20, 5, 2)
+#define PIN_PC20__A9			PINMUX_PIN(PIN_PC20, 6, 2)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__LCDDAT15		PINMUX_PIN(PIN_PC21, 1, 2)
+#define PIN_PC21__GTXER			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__ISC_PCK		PINMUX_PIN(PIN_PC21, 3, 1)
+#define PIN_PC21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PC21, 5, 2)
+#define PIN_PC21__A10			PINMUX_PIN(PIN_PC21, 6, 2)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__LCDDAT18		PINMUX_PIN(PIN_PC22, 1, 2)
+#define PIN_PC22__GCRS			PINMUX_PIN(PIN_PC22, 2, 1)
+#define PIN_PC22__ISC_VSYNC		PINMUX_PIN(PIN_PC22, 3, 1)
+#define PIN_PC22__FLEXCOM3_IO4		PINMUX_PIN(PIN_PC22, 5, 2)
+#define PIN_PC22__A11			PINMUX_PIN(PIN_PC22, 6, 2)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__LCDDAT19		PINMUX_PIN(PIN_PC23, 1, 2)
+#define PIN_PC23__GCOL			PINMUX_PIN(PIN_PC23, 2, 1)
+#define PIN_PC23__ISC_HSYNC		PINMUX_PIN(PIN_PC23, 3, 1)
+#define PIN_PC23__A12			PINMUX_PIN(PIN_PC23, 6, 2)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__LCDDAT20		PINMUX_PIN(PIN_PC24, 1, 2)
+#define PIN_PC24__GRX2			PINMUX_PIN(PIN_PC24, 2, 1)
+#define PIN_PC24__ISC_MCK		PINMUX_PIN(PIN_PC24, 3, 1)
+#define PIN_PC24__A13			PINMUX_PIN(PIN_PC24, 6, 2)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__LCDDAT21		PINMUX_PIN(PIN_PC25, 1, 2)
+#define PIN_PC25__GRX3			PINMUX_PIN(PIN_PC25, 2, 1)
+#define PIN_PC25__ISC_FIELD		PINMUX_PIN(PIN_PC25, 3, 1)
+#define PIN_PC25__A14			PINMUX_PIN(PIN_PC25, 6, 2)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__LCDDAT22		PINMUX_PIN(PIN_PC26, 1, 2)
+#define PIN_PC26__GTX2			PINMUX_PIN(PIN_PC26, 2, 1)
+#define PIN_PC26__CANTX1		PINMUX_PIN(PIN_PC26, 4, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 6, 2)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__LCDDAT23		PINMUX_PIN(PIN_PC27, 1, 2)
+#define PIN_PC27__GTX3			PINMUX_PIN(PIN_PC27, 2, 1)
+#define PIN_PC27__PCK1			PINMUX_PIN(PIN_PC27, 3, 2)
+#define PIN_PC27__CANRX1		PINMUX_PIN(PIN_PC27, 4, 1)
+#define PIN_PC27__TWD0			PINMUX_PIN(PIN_PC27, 5, 2)
+#define PIN_PC27__A16			PINMUX_PIN(PIN_PC27, 6, 2)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__LCDPWM		PINMUX_PIN(PIN_PC28, 1, 2)
+#define PIN_PC28__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC28, 2, 1)
+#define PIN_PC28__PCK2			PINMUX_PIN(PIN_PC28, 3, 2)
+#define PIN_PC28__TWCK0			PINMUX_PIN(PIN_PC28, 5, 2)
+#define PIN_PC28__A17			PINMUX_PIN(PIN_PC28, 6, 2)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__LCDDISP		PINMUX_PIN(PIN_PC29, 1, 2)
+#define PIN_PC29__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC29, 2, 1)
+#define PIN_PC29__A18			PINMUX_PIN(PIN_PC29, 6, 2)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__LCDVSYNC		PINMUX_PIN(PIN_PC30, 1, 2)
+#define PIN_PC30__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC30, 2, 1)
+#define PIN_PC30__A19			PINMUX_PIN(PIN_PC30, 6, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__LCDHSYNC		PINMUX_PIN(PIN_PC31, 1, 2)
+#define PIN_PC31__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC31, 2, 1)
+#define PIN_PC31__URXD3			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__A20			PINMUX_PIN(PIN_PC31, 6, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__LCDPCK			PINMUX_PIN(PIN_PD0, 1, 2)
+#define PIN_PD0__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD0, 2, 1)
+#define PIN_PD0__UTXD3			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__GTSUCOMP		PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__A23			PINMUX_PIN(PIN_PD0, 6, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__LCDDEN			PINMUX_PIN(PIN_PD1, 1, 2)
+#define PIN_PD1__GRXCK			PINMUX_PIN(PIN_PD1, 4, 2)
+#define PIN_PD1__A24			PINMUX_PIN(PIN_PD1, 6, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__URXD1			PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__GTXER			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__ISC_MCK		PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__A25			PINMUX_PIN(PIN_PD2, 6, 2)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__UTXD1			PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FIQ			PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__GCRS			PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__ISC_D11		PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__NWAIT			PINMUX_PIN(PIN_PD3, 6, 2)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__TWD1			PINMUX_PIN(PIN_PD4, 1, 2)
+#define PIN_PD4__URXD2			PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__GCOL			PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__ISC_D10		PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__NCS0			PINMUX_PIN(PIN_PD4, 6, 2)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__TWCK1			PINMUX_PIN(PIN_PD5, 1, 2)
+#define PIN_PD5__UTXD2			PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__GRX2			PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__ISC_D9			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__NCS1			PINMUX_PIN(PIN_PD5, 6, 2)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__TCK			PINMUX_PIN(PIN_PD6, 1, 2)
+#define PIN_PD6__PCK1			PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__GRX3			PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__ISC_D8			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__NCS2			PINMUX_PIN(PIN_PD6, 6, 2)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__TDI			PINMUX_PIN(PIN_PD7, 1, 2)
+#define PIN_PD7__UTMI_RXVAL		PINMUX_PIN(PIN_PD7, 3, 1)
+#define PIN_PD7__GTX2			PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__ISC_D0			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__NWR1_NBS1		PINMUX_PIN(PIN_PD7, 6, 2)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__TDO			PINMUX_PIN(PIN_PD8, 1, 2)
+#define PIN_PD8__UTMI_RXERR		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__GTX3			PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__ISC_D1			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__NANDRDY		PINMUX_PIN(PIN_PD8, 6, 2)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__TMS			PINMUX_PIN(PIN_PD9, 1, 2)
+#define PIN_PD9__UTMI_RXACT		PINMUX_PIN(PIN_PD9, 3, 1)
+#define PIN_PD9__GTXCK			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__ISC_D2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__NTRST			PINMUX_PIN(PIN_PD10, 1, 2)
+#define PIN_PD10__UTMI_HDIS		PINMUX_PIN(PIN_PD10, 3, 1)
+#define PIN_PD10__GTXEN			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__ISC_D3		PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__TIOA1			PINMUX_PIN(PIN_PD11, 1, 3)
+#define PIN_PD11__PCK2			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__UTMI_LS0		PINMUX_PIN(PIN_PD11, 3, 1)
+#define PIN_PD11__GRXDV			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__ISC_D4		PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__ISC_MCK		PINMUX_PIN(PIN_PD11, 7, 4)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 1, 3)
+#define PIN_PD12__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__UTMI_LS1		PINMUX_PIN(PIN_PD12, 3, 1)
+#define PIN_PD12__GRXER			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__ISC_D5		PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD12__ISC_D4		PINMUX_PIN(PIN_PD12, 6, 4)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__TCLK1			PINMUX_PIN(PIN_PD13, 1, 3)
+#define PIN_PD13__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__UTMI_CDRPCSEL0	PINMUX_PIN(PIN_PD13, 3, 1)
+#define PIN_PD13__GRX0			PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__ISC_D6		PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD13__ISC_D5		PINMUX_PIN(PIN_PD13, 6, 4)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__TCK			PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__UTMI_CDRPCSEL1	PINMUX_PIN(PIN_PD14, 3, 1)
+#define PIN_PD14__GRX1			PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__ISC_D7		PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__ISC_D6		PINMUX_PIN(PIN_PD14, 6, 4)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__TDI			PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__UTMI_CDRCPDIVEN	PINMUX_PIN(PIN_PD15, 3, 1)
+#define PIN_PD15__GTX0			PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__ISC_PCK		PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__ISC_D7		PINMUX_PIN(PIN_PD15, 6, 4)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__TDO			PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__UTMI_CDRBISTEN	PINMUX_PIN(PIN_PD16, 3, 1)
+#define PIN_PD16__GTX1			PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__ISC_VSYNC		PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__ISC_D8		PINMUX_PIN(PIN_PD16, 6, 4)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__TMS			PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__UTMI_CDRCPSELDIV	PINMUX_PIN(PIN_PD17, 3, 1)
+#define PIN_PD17__GMDC			PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__ISC_HSYNC		PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__ISC_D9		PINMUX_PIN(PIN_PD17, 6, 4)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__NTRST			PINMUX_PIN(PIN_PD18, 1, 1)
+#define PIN_PD18__GMDIO			PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__ISC_FIELD		PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__ISC_D10		PINMUX_PIN(PIN_PD18, 6, 4)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__PCK0			PINMUX_PIN(PIN_PD19, 1, 1)
+#define PIN_PD19__TWD1			PINMUX_PIN(PIN_PD19, 2, 3)
+#define PIN_PD19__URXD2			PINMUX_PIN(PIN_PD19, 3, 3)
+#define PIN_PD19__I2SC0_CK		PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__ISC_D11		PINMUX_PIN(PIN_PD19, 6, 4)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__TIOA2			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__TWCK1			PINMUX_PIN(PIN_PD20, 2, 3)
+#define PIN_PD20__UTXD2			PINMUX_PIN(PIN_PD20, 3, 3)
+#define PIN_PD20__I2SC0_MCK		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__ISC_PCK		PINMUX_PIN(PIN_PD20, 6, 4)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__TIOB2			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__TWD0			PINMUX_PIN(PIN_PD21, 2, 4)
+#define PIN_PD21__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD21, 3, 3)
+#define PIN_PD21__I2SC0_WS		PINMUX_PIN(PIN_PD21, 5, 2)
+#define PIN_PD21__ISC_VSYNC		PINMUX_PIN(PIN_PD21, 6, 4)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__TCLK2			PINMUX_PIN(PIN_PD22, 1, 3)
+#define PIN_PD22__TWCK0			PINMUX_PIN(PIN_PD22, 2, 4)
+#define PIN_PD22__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD22, 3, 3)
+#define PIN_PD22__I2SC0_DI0		PINMUX_PIN(PIN_PD22, 5, 2)
+#define PIN_PD22__ISC_HSYNC		PINMUX_PIN(PIN_PD22, 6, 4)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__URXD2			PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD23__I2SC0_DO0		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__ISC_FIELD		PINMUX_PIN(PIN_PD23, 6, 4)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__UTXD2			PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD24, 3, 3)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__SPI1_SPCK		PINMUX_PIN(PIN_PD25, 1, 3)
+#define PIN_PD25__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD25, 3, 3)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__SPI1_MOSI		PINMUX_PIN(PIN_PD26, 1, 3)
+#define PIN_PD26__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD26, 3, 2)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__SPI1_MISO		PINMUX_PIN(PIN_PD27, 1, 3)
+#define PIN_PD27__TCK			PINMUX_PIN(PIN_PD27, 2, 3)
+#define PIN_PD27__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD27, 3, 2)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__SPI1_NPCS0		PINMUX_PIN(PIN_PD28, 1, 3)
+#define PIN_PD28__TCI			PINMUX_PIN(PIN_PD28, 2, 3)
+#define PIN_PD28__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD28, 3, 2)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__SPI1_NPCS1		PINMUX_PIN(PIN_PD29, 1, 3)
+#define PIN_PD29__TDO			PINMUX_PIN(PIN_PD29, 2, 3)
+#define PIN_PD29__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD29, 3, 2)
+#define PIN_PD29__TIOA3			PINMUX_PIN(PIN_PD29, 4, 3)
+#define PIN_PD29__TWD0			PINMUX_PIN(PIN_PD29, 5, 3)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__SPI1_NPCS2		PINMUX_PIN(PIN_PD30, 1, 3)
+#define PIN_PD30__TMS			PINMUX_PIN(PIN_PD30, 2, 3)
+#define PIN_PD30__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__TIOB3			PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__TWCK0			PINMUX_PIN(PIN_PD30, 5, 3)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__ADTRG			PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__NTRST			PINMUX_PIN(PIN_PD31, 2, 3)
+#define PIN_PD31__IRQ			PINMUX_PIN(PIN_PD31, 3, 4)
+#define PIN_PD31__TCLK3			PINMUX_PIN(PIN_PD31, 4, 3)
+#define PIN_PD31__PCK0			PINMUX_PIN(PIN_PD31, 5, 2)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
new file mode 100644
index 000000000..353d0e5ec
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -0,0 +1,1256 @@
+/*
+ * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel SAMA5D2 family SoC";
+	compatible = "atmel,sama5d2";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart3;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	ns_sram: sram@00200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x20000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: gadget@00300000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00300000 0x100000
+			       0xfc02c000 0x400>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&udphs_clk>, <&utmi>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+
+			ep@0 {
+				reg = <0>;
+				atmel,fifo-size = <64>;
+				atmel,nb-banks = <1>;
+			};
+
+			ep@1 {
+				reg = <1>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@2 {
+				reg = <2>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@3 {
+				reg = <3>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@4 {
+				reg = <4>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@5 {
+				reg = <5>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@6 {
+				reg = <6>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@7 {
+				reg = <7>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@8 {
+				reg = <8>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep@9 {
+				reg = <9>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep@10 {
+				reg = <10>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep@11 {
+				reg = <11>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep@12 {
+				reg = <12>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep@13 {
+				reg = <13>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep@14 {
+				reg = <14>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep@15 {
+				reg = <15>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+		};
+
+		usb1: ohci@00400000 {
+			compatible = "atmel,sama5d2-ohci", "usb-ohci";
+			reg = <0x00400000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@00500000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@00a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		nand0: nand@80000000 {
+			compatible = "atmel,sama5d2-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = < /* EBI CS3 */
+				0x80000000 0x08000000
+				/* SMC PMECC regs */
+				0xf8014070 0x00000490
+				/* SMC PMECC Error Location regs */
+				0xf8014500 0x00000200
+				/* ROM Galois tables */
+				0x00040000 0x00018000
+				>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			atmel,has-pmecc;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
+			status = "disabled";
+
+			nfc@c0000000 {
+				compatible = "atmel,sama5d3-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = < /* NFC Command Registers */
+					0xc0000000 0x08000000
+					/* NFC HSMC regs */
+					0xf8014000 0x00000070
+					/* NFC SRAM banks */
+					0x00100000 0x00100000
+					>;
+				clocks = <&hsmc_clk>;
+				atmel,write-by-sram;
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xa0000000 0x300>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+			clock-names = "hclock", "multclk", "baseclk";
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xb0000000 0x300>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+			clock-names = "hclock", "multclk", "baseclk";
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d2-hlcdc";
+				reg = <0xf0000000 0x2000>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			ramc0: ramc@f000c000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf000c000 0x200>;
+				clocks = <&ddrck>, <&mpddr_clk>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0010000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0010000 0x1000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: pmc@f0014000 {
+				compatible = "atmel,sama5d2-pmc", "syscon";
+				reg = <0xf0014000 0x160>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <100000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc &main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,sama5d3-clk-pll";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <12000000 12000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <124000000 166000000>;
+					atmel,clk-divisors = <1 2 4 3>;
+				};
+
+				h32ck: h32mxck {
+					#clock-cells = <0>;
+					compatible = "atmel,sama5d4-clk-h32mx";
+					clocks = <&mck>;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					lcdck: lcdck {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+
+					iscck: iscck {
+						#clock-cells = <0>;
+						reg = <18>;
+						clocks = <&mck>;
+					};
+				};
+
+				periph32ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&h32ck>;
+
+					macb0_clk: macb0_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tdes_clk: tdes_clk {
+						#clock-cells = <0>;
+						reg = <11>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					matrix1_clk: matrix1_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					hsmc_clk: hsmc_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx0_clk: flx0_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx1_clk: flx1_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx2_clk: flx2_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx3_clk: flx3_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					flx4_clk: flx4_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart0_clk: uart0_clk {
+						#clock-cells = <0>;
+						reg = <24>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart1_clk: uart1_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart2_clk: uart2_clk {
+						#clock-cells = <0>;
+						reg = <26>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart3_clk: uart3_clk {
+						#clock-cells = <0>;
+						reg = <27>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uart4_clk: uart4_clk {
+						#clock-cells = <0>;
+						reg = <28>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <29>;
+						#clock-cells = <0>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <30>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <33>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <34>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tcb0_clk: tcb0_clk {
+						#clock-cells = <0>;
+						reg = <35>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tcb1_clk: tcb1_clk {
+						#clock-cells = <0>;
+						reg = <36>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <38>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <40>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					uhphs_clk: uhphs_clk {
+						#clock-cells = <0>;
+						reg = <41>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <42>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <43>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <44>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					trng_clk: trng_clk {
+						#clock-cells = <0>;
+						reg = <47>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pdmic_clk: pdmic_clk {
+						#clock-cells = <0>;
+						reg = <48>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					i2s0_clk: i2s0_clk {
+						#clock-cells = <0>;
+						reg = <54>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					i2s1_clk: i2s1_clk {
+						#clock-cells = <0>;
+						reg = <55>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					classd_clk: classd_clk {
+						#clock-cells = <0>;
+						reg = <59>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+				};
+
+				periph64ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					dma1_clk: dma1_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					aes_clk: aes_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					aesb_clk: aesb_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					sha_clk: sha_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					mpddr_clk: mpddr_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					matrix0_clk: matrix0_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					sdmmc0_hclk: sdmmc0_hclk {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					sdmmc1_hclk: sdmmc1_hclk {
+						#clock-cells = <0>;
+						reg = <32>;
+					};
+
+					lcdc_clk: lcdc_clk {
+						#clock-cells = <0>;
+						reg = <45>;
+					};
+
+					isc_clk: isc_clk {
+						#clock-cells = <0>;
+						reg = <46>;
+					};
+
+					qspi0_clk: qspi0_clk {
+						#clock-cells = <0>;
+						reg = <52>;
+					};
+
+					qspi1_clk: qspi1_clk {
+						#clock-cells = <0>;
+						reg = <53>;
+					};
+				};
+
+				gck {
+					compatible = "atmel,sama5d2-clk-generated";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					sdmmc0_gclk: sdmmc0_gclk {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					sdmmc1_gclk: sdmmc1_gclk {
+						#clock-cells = <0>;
+						reg = <32>;
+					};
+
+					tcb0_gclk: tcb0_gclk {
+						#clock-cells = <0>;
+						reg = <35>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tcb1_gclk: tcb1_gclk {
+						#clock-cells = <0>;
+						reg = <36>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pwm_gclk: pwm_gclk {
+						#clock-cells = <0>;
+						reg = <38>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pdmic_gclk: pdmic_gclk {
+						#clock-cells = <0>;
+						reg = <48>;
+					};
+
+					i2s0_gclk: i2s0_gclk {
+						#clock-cells = <0>;
+						reg = <54>;
+					};
+
+					i2s1_gclk: i2s1_gclk {
+						#clock-cells = <0>;
+						reg = <55>;
+					};
+				};
+			};
+
+			sha@f0028000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf0028000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx";
+				clocks = <&sha_clk>;
+				clock-names = "sha_clk";
+				status = "okay";
+			};
+
+			aes@f002c000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf002c000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&aes_clk>;
+				clock-names = "aes_clk";
+				status = "okay";
+			};
+
+			spi0: spi@f8000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8000000 0x100>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f8008000 {
+				compatible = "atmel,sama5d2-gem";
+				reg = <0xf8008000 0x1000>;
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
+					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
+					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf800c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f8010000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8010000 0x100>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			pdmic: pdmic@f8018000 {
+				compatible = "atmel,sama5d2-pdmic";
+				reg = <0xf8018000 0x124>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(50))>;
+				dma-names = "rx";
+				clocks = <&pdmic_clk>, <&pdmic_gclk>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			uart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>;
+				dma-names = "tx", "rx";
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>;
+				dma-names = "tx", "rx";
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&uart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xf8028000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8030000 {
+				compatible = "atmel,sama5d2-sfr", "syscon";
+				reg = <0xf8030000 0x98>;
+			};
+
+			flx0: flexcom@f8034000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8034000 0x200>;
+				clocks = <&flx0_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8034000 0x800>;
+				status = "disabled";
+			};
+
+			flx1: flexcom@f8038000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8038000 0x200>;
+				clocks = <&flx1_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8038000 0x800>;
+				status = "disabled";
+			};
+
+			rstc@f8048000 {
+				compatible = "atmel,sama5d3-rstc";
+				reg = <0xf8048000 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shdwc@f8048010 {
+				compatible = "atmel,sama5d2-shdwc";
+				reg = <0xf8048010 0x10>;
+				clocks = <&clk32k>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+			};
+
+			pit: timer@f8048030 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xf8048030 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&h32ck>;
+			};
+
+			watchdog@f8048040 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xf8048040 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			sckc@f8048050 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xf8048050 0x4>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <250000000>;
+					atmel,startup-time-usec = <75>;
+				};
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+					atmel,startup-time-usec = <1200000>;
+				};
+
+				clk32k: slowck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@f80480b0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xf80480b0 0x30>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			spi1: spi@fc000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc000000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(42))>;
+				dma-names = "tx", "rx";
+				clocks = <&uart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart4: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(43))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx", "rx";
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&uart4_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			flx2: flexcom@fc010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc010000 0x200>;
+				clocks = <&flx2_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc010000 0x800>;
+				status = "disabled";
+			};
+
+			flx3: flexcom@fc014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc014000 0x200>;
+				clocks = <&flx3_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc014000 0x800>;
+				status = "disabled";
+			};
+
+			flx4: flexcom@fc018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc018000 0x200>;
+				clocks = <&flx4_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc018000 0x800>;
+				status = "disabled";
+			};
+
+			trng@fc01c000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&trng_clk>;
+			};
+
+			aic: interrupt-controller@fc020000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d2-aic";
+				interrupt-controller;
+				reg = <0xfc020000 0x200>;
+				atmel,external-irqs = <49>;
+			};
+
+			i2c1: i2c@fc028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xfc028000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi1_clk>;
+				status = "disabled";
+			};
+
+			adc: adc@fc030000 {
+				compatible = "atmel,sama5d2-adc";
+				reg = <0xfc030000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&adc_clk>;
+				clock-names = "adc_clk";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				status = "disabled";
+			};
+
+			pioA: pinctrl@fc038000 {
+				compatible = "atmel,sama5d2-pinctrl";
+				reg = <0xfc038000 0x600>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <68 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <69 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <70 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&pioA_clk>;
+			};
+
+			tdes@fc044000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&tdes_clk>;
+				clock-names = "tdes_clk";
+				status = "okay";
+			};
+
+			chipid@fc069000 {
+				compatible = "atmel,sama5d2-chipid";
+				reg = <0xfc069000 0x8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 9e2444b07..4c84d333f 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -75,7 +75,7 @@
 		adc_op_clk: adc_op_clk{
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <20000000>;
+			clock-frequency = <1000000>;
 		};
 	};
 
@@ -145,8 +145,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf0010000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			i2c0: i2c@f0014000 {
@@ -322,29 +322,26 @@
 				atmel,adc-use-external-triggers;
 				atmel,adc-vref = <3000>;
 				atmel,adc-res = <10 12>;
+				atmel,adc-sample-hold-time = <11>;
 				atmel,adc-res-names = "lowres", "highres";
 				status = "disabled";
 
-				trigger@0 {
-					reg = <0>;
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
-					reg = <1>;
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
-				trigger@2 {
-					reg = <2>;
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
-				trigger@3 {
-					reg = <3>;
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -425,6 +422,13 @@
 				clock-names = "tdes_clk";
 			};
 
+			trng@f8040000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xf8040000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&trng_clk>;
+			};
+
 			dma0: dma-controller@ffffe600 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe600 0x200>;
@@ -906,7 +910,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,sama5d3-pmc";
+				compatible = "atmel,sama5d3-pmc", "syscon";
 				reg = <0xfffffc00 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -1259,13 +1263,15 @@
 			};
 
 			rstc@fffffe00 {
-				compatible = "atmel,at91sam9g45-rstc";
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shutdown-controller@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffe30 {
@@ -1279,6 +1285,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1315,6 +1322,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 			};
 		};
 
@@ -1329,13 +1337,13 @@
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
-			ep0 {
+			ep@0 {
 				reg = <0>;
 				atmel,fifo-size = <64>;
 				atmel,nb-banks = <1>;
 			};
 
-			ep1 {
+			ep@1 {
 				reg = <1>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -1343,7 +1351,7 @@
 				atmel,can-isoc;
 			};
 
-			ep2 {
+			ep@2 {
 				reg = <2>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -1351,84 +1359,84 @@
 				atmel,can-isoc;
 			};
 
-			ep3 {
+			ep@3 {
 				reg = <3>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep4 {
+			ep@4 {
 				reg = <4>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep5 {
+			ep@5 {
 				reg = <5>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep6 {
+			ep@6 {
 				reg = <6>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep7 {
+			ep@7 {
 				reg = <7>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-dma;
 			};
 
-			ep8 {
+			ep@8 {
 				reg = <8>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep9 {
+			ep@9 {
 				reg = <9>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep10 {
+			ep@10 {
 				reg = <10>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep11 {
+			ep@11 {
 				reg = <11>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep12 {
+			ep@12 {
 				reg = <12>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep13 {
+			ep@13 {
 				reg = <13>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep14 {
+			ep@14 {
 				reg = <14>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 			};
 
-			ep15 {
+			ep@15 {
 				reg = <15>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index 04eec0dfc..25e4c0b2d 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "sama5d31.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index cbd6a3ff1..c517b87a1 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "sama5d33.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index 878aa1642..c8b8449fd 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "sama5d34.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index d9a9aca1c..6e261fcf5 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -9,6 +9,8 @@
 /dts-v1/;
 #include "sama5d35.dtsi"
 #include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 
 / {
 	model = "Atmel SAMA5D35-EK";
@@ -49,7 +51,7 @@
 			label = "pb_user1";
 			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
index 59576c6f9..cd458b85a 100644
--- a/arch/arm/boot/dts/sama5d36ek.dts
+++ b/arch/arm/boot/dts/sama5d36ek.dts
@@ -10,6 +10,8 @@
 #include "sama5d36.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
 
 / {
 	model = "Atmel SAMA5D36-EK";
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index 026b252f0..e21099a1a 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -24,9 +24,9 @@
 					};
 					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
 						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index f7fa58fe0..801f9745e 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -31,8 +31,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8014000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb1_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 2cf9c3611..b5e111b29 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -34,40 +34,6 @@
 			spi0: spi@f0004000 {
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
 			};
-
-			macb0: ethernet@f0028000 {
-				phy-mode = "rgmii";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioB>;
-					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-					txen-skew-ps = <800>;
-					txc-skew-ps = <3000>;
-					rxdv-skew-ps = <400>;
-					rxc-skew-ps = <3000>;
-					rxd0-skew-ps = <400>;
-					rxd1-skew-ps = <400>;
-					rxd2-skew-ps = <400>;
-					rxd3-skew-ps = <400>;
-				};
-
-				ethernet-phy@7 {
-					reg = <0x7>;
-					interrupt-parent = <&pioB>;
-					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-					txen-skew-ps = <800>;
-					txc-skew-ps = <3000>;
-					rxdv-skew-ps = <400>;
-					rxc-skew-ps = <3000>;
-					rxd0-skew-ps = <400>;
-					rxd1-skew-ps = <400>;
-					rxd2-skew-ps = <400>;
-					rxd3-skew-ps = <400>;
-				};
-			};
 		};
 
 		nand0: nand@60000000 {
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 83bee7a3a..6d252ad05 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -87,6 +87,8 @@
 					isi_0: endpoint {
 						remote-endpoint = <&ov2640_0>;
 						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
 					};
 				};
 			};
@@ -115,18 +117,6 @@
 				status = "okay";
 			};
 
-			macb1: ethernet@f802c000 {
-				phy-mode = "rmii";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&pioE>;
-					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
-					reg = <1>;
-				};
-			};
-
 			pinctrl@fffff200 {
 				board {
 					pinctrl_mmc0_cd: mmc0_cd {
diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
new file mode 100644
index 000000000..2fd14f371
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
@@ -0,0 +1,26 @@
+/*
+ * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board
+ * Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
new file mode 100644
index 000000000..65aea7a75
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
@@ -0,0 +1,48 @@
+/*
+ * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard
+ * Gigabit Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 3ee22ee13..65e725fb5 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -135,13 +135,13 @@
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
-			ep0 {
+			ep@0 {
 				reg = <0>;
 				atmel,fifo-size = <64>;
 				atmel,nb-banks = <1>;
 			};
 
-			ep1 {
+			ep@1 {
 				reg = <1>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -149,7 +149,7 @@
 				atmel,can-isoc;
 			};
 
-			ep2 {
+			ep@2 {
 				reg = <2>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <3>;
@@ -157,7 +157,7 @@
 				atmel,can-isoc;
 			};
 
-			ep3 {
+			ep@3 {
 				reg = <3>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -165,7 +165,7 @@
 				atmel,can-isoc;
 			};
 
-			ep4 {
+			ep@4 {
 				reg = <4>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -173,7 +173,7 @@
 				atmel,can-isoc;
 			};
 
-			ep5 {
+			ep@5 {
 				reg = <5>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -181,7 +181,7 @@
 				atmel,can-isoc;
 			};
 
-			ep6 {
+			ep@6 {
 				reg = <6>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -189,7 +189,7 @@
 				atmel,can-isoc;
 			};
 
-			ep7 {
+			ep@7 {
 				reg = <7>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -197,56 +197,56 @@
 				atmel,can-isoc;
 			};
 
-			ep8 {
+			ep@8 {
 				reg = <8>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep9 {
+			ep@9 {
 				reg = <9>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep10 {
+			ep@10 {
 				reg = <10>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep11 {
+			ep@11 {
 				reg = <11>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep12 {
+			ep@12 {
 				reg = <12>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep13 {
+			ep@13 {
 				reg = <13>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep14 {
+			ep@14 {
 				reg = <14>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
 				atmel,can-isoc;
 			};
 
-			ep15 {
+			ep@15 {
 				reg = <15>;
 				atmel,fifo-size = <1024>;
 				atmel,nb-banks = <2>;
@@ -386,7 +386,7 @@
 			};
 
 			pmc: pmc@f0018000 {
-				compatible = "atmel,sama5d3-pmc";
+				compatible = "atmel,sama5d3-pmc", "syscon";
 				reg = <0xf0018000 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -451,7 +451,7 @@
 					interrupt-parent = <&pmc>;
 					interrupts = <AT91_PMC_MCKRDY>;
 					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-					atmel,clk-output-range = <125000000 177000000>;
+					atmel,clk-output-range = <125000000 200000000>;
 					atmel,clk-divisors = <1 2 4 3>;
 				};
 
@@ -916,7 +916,7 @@
 			};
 
 			i2c0: i2c@f8014000 {
-				compatible = "atmel,at91sam9x5-i2c";
+				compatible = "atmel,sama5d4-i2c";
 				reg = <0xf8014000 0x4000>;
 				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma1
@@ -935,15 +935,15 @@
 			};
 
 			i2c1: i2c@f8018000 {
-				compatible = "atmel,at91sam9x5-i2c";
+				compatible = "atmel,sama5d4-i2c";
 				reg = <0xf8018000 0x4000>;
 				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma1
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(4)>,
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(4))>,
 				       <&dma1
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(5)>;
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(5))>;
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
@@ -957,8 +957,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf801c000 0x100>;
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb0_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			macb0: ethernet@f8020000 {
@@ -975,7 +975,7 @@
 			};
 
 			i2c2: i2c@f8024000 {
-				compatible = "atmel,at91sam9x5-i2c";
+				compatible = "atmel,sama5d4-i2c";
 				reg = <0xf8024000 0x4000>;
 				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma1
@@ -1185,29 +1185,40 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xfc020000 0x100>;
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb1_clk>;
-				clock-names = "t0_clk";
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb1: ethernet@fc028000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xfc028000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fc030000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc030000 0x100>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&trng_clk>;
 			};
 
 			adc0: adc@fc034000 {
 				compatible = "atmel,at91sam9x5-adc";
 				reg = <0xfc034000 0x100>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					/* external trigger is conflict with USBA_VBUS */
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
 				clocks = <&adc_clk>,
 					 <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-channels-used = <0x01f>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-use-external;
+				atmel,adc-use-external-triggers;
 				atmel,adc-vref = <3000>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-sample-hold-time = <11>;
@@ -1215,22 +1226,22 @@
 				atmel,adc-ts-pressure-threshold = <10000>;
 				status = "disabled";
 
-				trigger@0 {
+				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
 					trigger-external;
 				};
-				trigger@1 {
+				trigger1 {
 					trigger-name = "external-falling";
 					trigger-value = <0x2>;
 					trigger-external;
 				};
-				trigger@2 {
+				trigger2 {
 					trigger-name = "external-any";
 					trigger-value = <0x3>;
 					trigger-external;
 				};
-				trigger@3 {
+				trigger3 {
 					trigger-name = "continuous";
 					trigger-value = <0x6>;
 				};
@@ -1247,7 +1258,7 @@
 				dma-names = "tx", "rx";
 				clocks = <&aes_clk>;
 				clock-names = "aes_clk";
-				status = "disabled";
+				status = "okay";
 			};
 
 			tdes@fc04c000 {
@@ -1261,7 +1272,7 @@
 				dma-names = "tx", "rx";
 				clocks = <&tdes_clk>;
 				clock-names = "tdes_clk";
-				status = "disabled";
+				status = "okay";
 			};
 
 			sha@fc050000 {
@@ -1273,17 +1284,19 @@
 				dma-names = "tx";
 				clocks = <&sha_clk>;
 				clock-names = "sha_clk";
-				status = "disabled";
+				status = "okay";
 			};
 
 			rstc@fc068600 {
-				compatible = "atmel,at91sam9g45-rstc";
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfc068600 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fc068610 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfc068610 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fc068630 {
@@ -1294,8 +1307,10 @@
 			};
 
 			watchdog@fc068640 {
-				compatible = "atmel,at91sam9260-wdt";
+				compatible = "atmel,sama5d4-wdt";
 				reg = <0xfc068640 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -1329,12 +1344,13 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfc0686b0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 			};
 
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				clocks = <&dbgu_clk>;
@@ -1355,7 +1371,7 @@
 					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
 					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
 					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
-					0x00000000 0x00000000 0x00000000	/* pioD */
+					0x0003ff00 0x8002a800 0x00000000	/* pioD */
 					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
 					>;
 
@@ -1401,7 +1417,6 @@
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					clocks = <&pioD_clk>;
-					status = "disabled";
 				};
 
 				pioE: gpio@fc06d000 {
@@ -1641,19 +1656,44 @@
 					};
 				};
 
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX0 */
+							 AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX1 */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX0 */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX1 */
+							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXDV */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXER */
+							 AT91_PIOA  4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXEN */
+							 AT91_PIOA  2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXCK */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDC */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDIO */
+							>;
+					};
+				};
+
 				mmc0 {
 					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
 						atmel,pins =
 							<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* MCI0_CK, conflict with PCK1(ISI_MCK) */
-							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDB, conflict with NAND_D0 */
-							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB0, conflict with NAND_D1 */
+							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDA, conflict with NAND_D0 */
+							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA0, conflict with NAND_D1 */
 							>;
 					};
 					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
 						atmel,pins =
-							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB1, conflict with NAND_D2 */
-							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB2, conflict with NAND_D3 */
-							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB3, conflict with NAND_D4 */
+							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA1, conflict with NAND_D2 */
+							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA2, conflict with NAND_D3 */
+							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA3, conflict with NAND_D4 */
+							>;
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA4, conflict with NAND_D5 */
+							 AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA5, conflict with NAND_D6 */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA6, conflict with NAND_D7 */
+							 AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA7, conflict with NAND_OE */
 							>;
 					};
 				};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 24b4cd24d..3d65f1f6d 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -22,7 +22,7 @@
 	compatible = "renesas,kzm9g", "renesas,sh73a0";
 
 	aliases {
-		serial4 = &scifa4;
+		serial0 = &scifa4;
 	};
 
 	cpus {
@@ -39,16 +39,16 @@
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
-		stdout-path = &scifa4;
+		bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
 
-	reg_1p8v: regulator@0 {
+	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
 		regulator-min-microvolt = <1800000>;
@@ -57,7 +57,7 @@
 		regulator-boot-on;
 	};
 
-	reg_3p3v: regulator@1 {
+	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -66,7 +66,7 @@
 		regulator-boot-on;
 	};
 
-	vmmc_sdhi0: regulator@2 {
+	vmmc_sdhi0: regulator-vmmc-sdhi0 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHI0 Vcc";
 		regulator-min-microvolt = <3300000>;
@@ -75,7 +75,7 @@
 		enable-active-high;
 	};
 
-	vmmc_sdhi2: regulator@3 {
+	vmmc_sdhi2: regulator-vmmc-sdhi2 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHI2 Vcc";
 		regulator-min-microvolt = <3300000>;
@@ -147,7 +147,14 @@
 			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			label = "SW1";
-			gpio-key,wakeup;
+			wakeup-source;
+		};
+
+		wakeup-key {
+			gpios = <&pfc 159 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			label = "NMI";
+			wakeup-source;
 		};
 	};
 
@@ -206,7 +213,7 @@
 	};
 
 	accelerometer@1d {
-		compatible = "adi,adxl34x";
+		compatible = "adi,adxl345";
 		reg = <0x1d>;
 		interrupt-parent = <&irqpin3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
@@ -329,41 +336,41 @@
 
 &pfc {
 	i2c3_pins: i2c3 {
-		renesas,groups = "i2c3_1";
-		renesas,function = "i2c3";
+		groups = "i2c3_1";
+		function = "i2c3";
 	};
 
 	mmcif_pins: mmc {
 		mux {
-			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
-			renesas,function = "mmc0";
+			groups = "mmc0_data8_0", "mmc0_ctrl_0";
+			function = "mmc0";
 		};
 		cfg {
-			renesas,groups = "mmc0_data8_0";
-			renesas,pins = "PORT279";
+			groups = "mmc0_data8_0";
+			pins = "PORT279";
 			bias-pull-up;
 		};
 	};
 
-	scifa4_pins: serial4 {
-		renesas,groups = "scifa4_data", "scifa4_ctrl";
-		renesas,function = "scifa4";
+	scifa4_pins: scifa4 {
+		groups = "scifa4_data", "scifa4_ctrl";
+		function = "scifa4";
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
-		renesas,function = "sdhi0";
+		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+		function = "sdhi0";
 	};
 
 	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
 	};
 
 	fsia_pins: sounda {
-		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
-				 "fsia_data_in", "fsia_data_out";
-		renesas,function = "fsia";
+		groups = "fsia_mclk_in", "fsia_sclk_in",
+			 "fsia_data_in", "fsia_data_out";
+		function = "fsia";
 	};
 };
 
@@ -371,6 +378,7 @@
 	pinctrl-0 = <&scifa4_pins>;
 	pinctrl-names = "default";
 
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 11e17c5f2..032fe2f14 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -28,6 +28,7 @@
 			reg = <0>;
 			clock-frequency = <1196000000>;
 			power-domains = <&pd_a2sl>;
+			next-level-cache = <&L2>;
 		};
 		cpu@1 {
 			device_type = "cpu";
@@ -35,13 +36,14 @@
 			reg = <1>;
 			clock-frequency = <1196000000>;
 			power-domains = <&pd_a2sl>;
+			next-level-cache = <&L2>;
 		};
 	};
 
 	timer@f0000600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xf0000600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&twd_clk>;
 	};
 
@@ -53,11 +55,23 @@
 		      <0xf0000100 0x100>;
 	};
 
+	L2: cache-controller@f0100000 {
+		compatible = "arm,pl310-cache";
+		reg = <0xf0100000 0x1000>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_a3sm>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		arm,shared-override;
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	sbsc2: memory-controller@fb400000 {
 		compatible = "renesas,sbsc-sh73a0";
 		reg = <0xfb400000 0x400>;
-		interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "sec", "temp";
 		power-domains = <&pd_a4bc1>;
 	};
@@ -65,22 +79,22 @@
 	sbsc1: memory-controller@fe400000 {
 		compatible = "renesas,sbsc-sh73a0";
 		reg = <0xfe400000 0x400>;
-		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "sec", "temp";
 		power-domains = <&pd_a4bc0>;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 56 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	cmt1: timer@e6138000 {
 		compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
 		reg = <0xe6138000 0x200>;
-		interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;
@@ -99,14 +113,14 @@
 			<0xe6900020 1>,
 			<0xe6900040 1>,
 			<0xe6900060 1>;
-		interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
-			      0 2 IRQ_TYPE_LEVEL_HIGH
-			      0 3 IRQ_TYPE_LEVEL_HIGH
-			      0 4 IRQ_TYPE_LEVEL_HIGH
-			      0 5 IRQ_TYPE_LEVEL_HIGH
-			      0 6 IRQ_TYPE_LEVEL_HIGH
-			      0 7 IRQ_TYPE_LEVEL_HIGH
-			      0 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -121,14 +135,14 @@
 			<0xe6900024 1>,
 			<0xe6900044 1>,
 			<0xe6900064 1>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
-			      0 10 IRQ_TYPE_LEVEL_HIGH
-			      0 11 IRQ_TYPE_LEVEL_HIGH
-			      0 12 IRQ_TYPE_LEVEL_HIGH
-			      0 13 IRQ_TYPE_LEVEL_HIGH
-			      0 14 IRQ_TYPE_LEVEL_HIGH
-			      0 15 IRQ_TYPE_LEVEL_HIGH
-			      0 16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -143,14 +157,14 @@
 			<0xe6900028 1>,
 			<0xe6900048 1>,
 			<0xe6900068 1>;
-		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
-			      0 18 IRQ_TYPE_LEVEL_HIGH
-			      0 19 IRQ_TYPE_LEVEL_HIGH
-			      0 20 IRQ_TYPE_LEVEL_HIGH
-			      0 21 IRQ_TYPE_LEVEL_HIGH
-			      0 22 IRQ_TYPE_LEVEL_HIGH
-			      0 23 IRQ_TYPE_LEVEL_HIGH
-			      0 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -165,14 +179,14 @@
 			<0xe690002c 1>,
 			<0xe690004c 1>,
 			<0xe690006c 1>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
-			      0 26 IRQ_TYPE_LEVEL_HIGH
-			      0 27 IRQ_TYPE_LEVEL_HIGH
-			      0 28 IRQ_TYPE_LEVEL_HIGH
-			      0 29 IRQ_TYPE_LEVEL_HIGH
-			      0 30 IRQ_TYPE_LEVEL_HIGH
-			      0 31 IRQ_TYPE_LEVEL_HIGH
-			      0 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -183,10 +197,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6820000 0x425>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
-			      0 168 IRQ_TYPE_LEVEL_HIGH
-			      0 169 IRQ_TYPE_LEVEL_HIGH
-			      0 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -197,10 +211,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6822000 0x425>;
-		interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
-			      0 52 IRQ_TYPE_LEVEL_HIGH
-			      0 53 IRQ_TYPE_LEVEL_HIGH
-			      0 54 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -211,10 +225,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6824000 0x425>;
-		interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
-			      0 172 IRQ_TYPE_LEVEL_HIGH
-			      0 173 IRQ_TYPE_LEVEL_HIGH
-			      0 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -225,10 +239,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6826000 0x425>;
-		interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
-			      0 184 IRQ_TYPE_LEVEL_HIGH
-			      0 185 IRQ_TYPE_LEVEL_HIGH
-			      0 186 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -239,10 +253,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6828000 0x425>;
-		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
-			      0 188 IRQ_TYPE_LEVEL_HIGH
-			      0 189 IRQ_TYPE_LEVEL_HIGH
-			      0 190 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
 		power-domains = <&pd_c5>;
 		status = "disabled";
@@ -251,20 +265,64 @@
 	mmcif: mmc@e6bd0000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
-		interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
-			      0 141 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
 		power-domains = <&pd_a3sp>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
 
+	msiof0: spi@e6e20000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6e20000 0x0064>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof1: spi@e6e10000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6e10000 0x0064>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof2: spi@e6e00000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6e00000 0x0064>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof3: spi@e6c90000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6c90000 0x0064>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee100000 0x100>;
-		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
-			      0 84 IRQ_TYPE_LEVEL_HIGH
-			      0 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -275,8 +333,8 @@
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee120000 0x100>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
-			      0 89 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		toshiba,mmc-wrprotect-disable;
@@ -287,8 +345,8 @@
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee140000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
-			      0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		toshiba,mmc-wrprotect-disable;
@@ -299,9 +357,9 @@
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c40000 0x100>;
-		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -309,9 +367,9 @@
 	scifa1: serial@e6c50000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c50000 0x100>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -319,9 +377,9 @@
 	scifa2: serial@e6c60000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c60000 0x100>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -329,9 +387,9 @@
 	scifa3: serial@e6c70000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c70000 0x100>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -339,9 +397,9 @@
 	scifa4: serial@e6c80000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c80000 0x100>;
-		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -349,9 +407,9 @@
 	scifa5: serial@e6cb0000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6cb0000 0x100>;
-		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -359,9 +417,9 @@
 	scifa6: serial@e6cc0000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6cc0000 0x100>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -369,9 +427,9 @@
 	scifa7: serial@e6cd0000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6cd0000 0x100>;
-		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -379,9 +437,9 @@
 	scifb: serial@e6c30000 {
 		compatible = "renesas,scifb-sh73a0", "renesas,scifb";
 		reg = <0xe6c30000 0x100>;
-		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -392,6 +450,9 @@
 		      <0xe605801c 0x1c>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges =
+			<&pfc 0 0 119>, <&pfc 128 128 37>, <&pfc 192 192 91>,
+			<&pfc 288 288 22>;
 		interrupts-extended =
 			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
 			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
@@ -518,7 +579,7 @@
 		#sound-dai-cells = <1>;
 		compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
 		reg = <0xec230000 0x400>;
-		interrupts = <0 146 0x4>;
+		interrupts = <GIC_SPI 146 0x4>;
 		power-domains = <&pd_a4mp>;
 		status = "disabled";
 	};
@@ -530,7 +591,7 @@
 		#size-cells = <1>;
 		ranges = <0 0 0x20000000>;
 		reg = <0xfec10000 0x400>;
-		interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&zb_clk>;
 		power-domains = <&pd_a4s>;
 	};
@@ -541,39 +602,33 @@
 		ranges;
 
 		/* External root clocks */
-		extalr_clk: extalr_clk {
+		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
-			clock-output-names = "extalr";
 		};
-		extal1_clk: extal1_clk {
+		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <26000000>;
-			clock-output-names = "extal1";
 		};
-		extal2_clk: extal2_clk {
+		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-output-names = "extal2";
 		};
-		extcki_clk: extcki_clk {
+		extcki_clk: extcki {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-output-names = "extcki";
 		};
-		fsiack_clk: fsiack_clk {
+		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "fsiack";
 		};
-		fsibck_clk: fsibck_clk {
+		fsibck_clk: fsibck {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
-			clock-output-names = "fsibck";
 		};
 
 		/* Special CPG clocks */
@@ -589,7 +644,7 @@
 		};
 
 		/* Variable factor clocks (DIV6) */
-		vclk1_clk: vclk1_clk@e6150008 {
+		vclk1_clk: vclk1@e6150008 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150008 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
@@ -597,9 +652,8 @@
 				 <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>,
 				 <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk1";
 		};
-		vclk2_clk: vclk2_clk@e615000c {
+		vclk2_clk: vclk2@e615000c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615000c 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
@@ -607,9 +661,8 @@
 				 <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>,
 				 <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk2";
 		};
-		vclk3_clk: vclk3_clk@e615001c {
+		vclk3_clk: vclk3@e615001c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615001c 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
@@ -617,7 +670,6 @@
 				 <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>,
 				 <0>;
 			#clock-cells = <0>;
-			clock-output-names = "vclk3";
 		};
 		zb_clk: zb_clk@e6150010 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
@@ -627,181 +679,161 @@
 			#clock-cells = <0>;
 			clock-output-names = "zb";
 		};
-		flctl_clk: flctl_clk@e6150014 {
+		flctl_clk: flctlck@e6150014 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150014 4>;
 			clocks = <&pll1_div2_clk>, <0>,
 				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "flctlck";
 		};
-		sdhi0_clk: sdhi0_clk@e6150074 {
+		sdhi0_clk: sdhi0ck@e6150074 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150074 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&pll1_div13_clk>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "sdhi0ck";
 		};
-		sdhi1_clk: sdhi1_clk@e6150078 {
+		sdhi1_clk: sdhi1ck@e6150078 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150078 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&pll1_div13_clk>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "sdhi1ck";
 		};
-		sdhi2_clk: sdhi2_clk@e615007c {
+		sdhi2_clk: sdhi2ck@e615007c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615007c 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&pll1_div13_clk>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "sdhi2ck";
 		};
-		fsia_clk: fsia_clk@e6150018 {
+		fsia_clk: fsia@e6150018 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150018 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&fsiack_clk>, <&fsiack_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "fsia";
 		};
-		fsib_clk: fsib_clk@e6150090 {
+		fsib_clk: fsib@e6150090 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150090 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&fsibck_clk>, <&fsibck_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "fsib";
 		};
-		sub_clk: sub_clk@e6150080 {
+		sub_clk: sub@e6150080 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150080 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&extal2_clk>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sub";
 		};
-		spua_clk: spua_clk@e6150084 {
+		spua_clk: spua@e6150084 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150084 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&extal2_clk>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "spua";
 		};
-		spuv_clk: spuv_clk@e6150094 {
+		spuv_clk: spuv@e6150094 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150094 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&extal2_clk>, <&extal2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "spuv";
 		};
-		msu_clk: msu_clk@e6150088 {
+		msu_clk: msu@e6150088 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150088 4>;
 			clocks = <&pll1_div2_clk>, <0>,
 				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "msu";
 		};
-		hsi_clk: hsi_clk@e615008c {
+		hsi_clk: hsi@e615008c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615008c 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&pll1_div7_clk>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "hsi";
 		};
-		mfg1_clk: mfg1_clk@e6150098 {
+		mfg1_clk: mfg1@e6150098 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150098 4>;
 			clocks = <&pll1_div2_clk>, <0>,
 				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "mfg1";
 		};
-		mfg2_clk: mfg2_clk@e615009c {
+		mfg2_clk: mfg2@e615009c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615009c 4>;
 			clocks = <&pll1_div2_clk>, <0>,
 				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "mfg2";
 		};
-		dsit_clk: dsit_clk@e6150060 {
+		dsit_clk: dsit@e6150060 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150060 4>;
 			clocks = <&pll1_div2_clk>, <0>,
 				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "dsit";
 		};
-		dsi0p_clk: dsi0p_clk@e6150064 {
+		dsi0p_clk: dsi0pck@e6150064 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150064 4>;
 			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
 				 <&cpg_clocks SH73A0_CLK_MAIN>, <&extal2_clk>,
 				 <&extcki_clk>, <0>, <0>, <0>;
 			#clock-cells = <0>;
-			clock-output-names = "dsi0pck";
 		};
 
 		/* Fixed factor clocks */
-		main_div2_clk: main_div2_clk {
+		main_div2_clk: main_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks SH73A0_CLK_MAIN>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "main_div2";
 		};
-		pll1_div2_clk: pll1_div2_clk {
+		pll1_div2_clk: pll1_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <2>;
 			clock-mult = <1>;
-			clock-output-names = "pll1_div2";
 		};
-		pll1_div7_clk: pll1_div7_clk {
+		pll1_div7_clk: pll1_div7 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <7>;
 			clock-mult = <1>;
-			clock-output-names = "pll1_div7";
 		};
-		pll1_div13_clk: pll1_div13_clk {
+		pll1_div13_clk: pll1_div13 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
 			#clock-cells = <0>;
 			clock-div = <13>;
 			clock-mult = <1>;
-			clock-output-names = "pll1_div13";
 		};
-		twd_clk: twd_clk {
+		twd_clk: twd {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks SH73A0_CLK_Z>;
 			#clock-cells = <0>;
 			clock-div = <4>;
 			clock-mult = <1>;
-			clock-output-names = "twd";
 		};
 
 		/* Gate clocks */
 		mstp0_clks: mstp0_clks@e6150130 {
 			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0xe6150130 4>, <0xe6150030 4>;
-			clocks = <&cpg_clocks SH73A0_CLK_HP>;
+			clocks = <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
-				SH73A0_CLK_IIC2
+				SH73A0_CLK_IIC2 SH73A0_CLK_MSIOF0
 			>;
 			clock-output-names =
-				"iic2";
+				"iic2", "msiof0";
 		};
 		mstp1_clks: mstp1_clks@e6150134 {
 			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -831,20 +863,24 @@
 			reg = <0xe6150138 4>, <0xe6150040 4>;
 			clocks = <&sub_clk>, <&cpg_clocks SH73A0_CLK_HP>,
 				 <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
-				 <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>,
-				 <&sub_clk>, <&sub_clk>;
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				SH73A0_CLK_SCIFA7 SH73A0_CLK_SY_DMAC
-				SH73A0_CLK_MP_DMAC SH73A0_CLK_SCIFA5
-				SH73A0_CLK_SCIFB SH73A0_CLK_SCIFA0
-				SH73A0_CLK_SCIFA1 SH73A0_CLK_SCIFA2
-				SH73A0_CLK_SCIFA3 SH73A0_CLK_SCIFA4
+				SH73A0_CLK_MP_DMAC SH73A0_CLK_MSIOF3
+				SH73A0_CLK_MSIOF1 SH73A0_CLK_SCIFA5
+				SH73A0_CLK_SCIFB SH73A0_CLK_MSIOF2
+				SH73A0_CLK_SCIFA0 SH73A0_CLK_SCIFA1
+				SH73A0_CLK_SCIFA2 SH73A0_CLK_SCIFA3
+				SH73A0_CLK_SCIFA4
 			>;
 			clock-output-names =
-				"scifa7", "sy_dmac", "mp_dmac", "scifa5",
-				"scifb", "scifa0", "scifa1", "scifa2",
-				"scifa3", "scifa4";
+				"scifa7", "sy_dmac", "mp_dmac", "msiof3",
+				"msiof1", "scifa5", "scifb", "msiof2",
+				"scifa0", "scifa1", "scifa2", "scifa3",
+				"scifa4";
 		};
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 80f924dee..9f4814127 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -69,7 +69,7 @@
 		ranges;
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -164,7 +164,7 @@
 						dbg_base_clk: dbg_base_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
+							clocks = <&main_pll>, <&osc1>;
 							div-reg = <0xe8 0 9>;
 							reg = <0x50>;
 						};
@@ -318,7 +318,7 @@
 					l3_sp_clk: l3_sp_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>;
+						clocks = <&l3_mp_clk>;
 						div-reg = <0x64 2 2>;
 					};
 
@@ -349,7 +349,7 @@
 					dbg_clk: dbg_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
+						clocks = <&dbg_at_clk>;
 						div-reg = <0x68 2 2>;
 						clk-gate = <0x60 5>;
 					};
@@ -481,8 +481,44 @@
 						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
 						clk-gate = <0xa0 11>;
 					};
+
+					ddr_dqs_clk_gate: ddr_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dqs_clk>;
+						clk-gate = <0xd8 0>;
+					};
+
+					ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_2x_dqs_clk>;
+						clk-gate = <0xd8 1>;
+					};
+
+					ddr_dq_clk_gate: ddr_dq_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dq_clk>;
+						clk-gate = <0xd8 2>;
+					};
+
+					h2f_user2_clk: h2f_user2_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr2_clk>;
+						clk-gate = <0xd8 3>;
+					};
+
 				};
-			};
+		};
+
+		fpgamgr0: fpgamgr@ff706000 {
+			compatible = "altr,socfpga-fpga-mgr";
+			reg = <0xff706000 0x1000
+			       0xffb90000 0x1000>;
+			interrupts = <0 175 4>;
+		};
 
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
@@ -520,52 +556,12 @@
 			status = "disabled";
 		};
 
-		i2c0: i2c@ffc04000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc04000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 158 0x4>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@ffc05000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc05000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 159 0x4>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@ffc06000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc06000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 160 0x4>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@ffc07000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc07000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 161 0x4>;
-			status = "disabled";
-		};
-
 		gpio0: gpio@ff708000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff708000 0x1000>;
-			clocks = <&per_base_clk>;
+			clocks = <&l4_mp_clk>;
 			status = "disabled";
 
 			porta: gpio-controller@0 {
@@ -585,7 +581,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff709000 0x1000>;
-			clocks = <&per_base_clk>;
+			clocks = <&l4_mp_clk>;
 			status = "disabled";
 
 			portb: gpio-controller@0 {
@@ -605,7 +601,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff70a000 0x1000>;
-			clocks = <&per_base_clk>;
+			clocks = <&l4_mp_clk>;
 			status = "disabled";
 
 			portc: gpio-controller@0 {
@@ -620,15 +616,64 @@
 			};
 		};
 
-		sdr: sdr@ffc25000 {
-			compatible = "syscon";
-			reg = <0xffc25000 0x1000>;
+		i2c0: i2c@ffc04000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc04000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 158 0x4>;
+			status = "disabled";
 		};
 
-		sdramedac {
-			compatible = "altr,sdram-edac";
-			altr,sdr-syscon = <&sdr>;
-			interrupts = <0 39 4>;
+		i2c1: i2c@ffc05000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc05000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 159 0x4>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc06000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc06000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 160 0x4>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc07000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc07000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 161 0x4>;
+			status = "disabled";
+		};
+
+		eccmgr: eccmgr@ffd08140 {
+			compatible = "altr,socfpga-ecc-manager";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			l2-ecc@ffd08140 {
+				compatible = "altr,socfpga-l2-ecc";
+				reg = <0xffd08140 0x4>;
+				interrupts = <0 36 1>, <0 37 1>;
+			};
+
+			ocram-ecc@ffd08144 {
+				compatible = "altr,socfpga-ocram-ecc";
+				reg = <0xffd08144 0x4>;
+				iram = <&ocram>;
+				interrupts = <0 178 1>, <0 179 1>;
+			};
 		};
 
 		L2: l2-cache@fffef000 {
@@ -639,6 +684,8 @@
 			cache-level = <2>;
 			arm,tag-latency = <1 1 1>;
 			arm,data-latency = <2 1 1>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
 		};
 
 		mmc: dwmmc0@ff704000 {
@@ -650,6 +697,7 @@
 			#size-cells = <0>;
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
+			status = "disabled";
 		};
 
 		ocram: sram@ffff0000 {
@@ -657,6 +705,29 @@
 			reg = <0xffff0000 0x10000>;
 		};
 
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+			altr,modrst-offset = <0x10>;
+		};
+
+		scu: snoop-control-unit@fffec000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xfffec000 0x100>;
+		};
+
+		sdr: sdr@ffc25000 {
+			compatible = "syscon";
+			reg = <0xffc25000 0x1000>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 39 4>;
+		};
+
 		spi0: spi@fff00000 {
 			compatible = "snps,dw-apb-ssi";
 			#address-cells = <1>;
@@ -668,11 +739,6 @@
 			status = "disabled";
 		};
 
-		scu: snoop-control-unit@fffec000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xfffec000 0x100>;
-		};
-
 		spi1: spi@fff01000 {
 			compatible = "snps,dw-apb-ssi";
 			#address-cells = <1>;
@@ -684,6 +750,11 @@
 			status = "disabled";
 		};
 
+		sysmgr: sysmgr@ffd08000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd08000 0x4000>;
+		};
+
 		/* Local timer */
 		timer@fffec600 {
 			compatible = "arm,cortex-a9-twd-timer";
@@ -748,12 +819,6 @@
 			dma-names = "tx", "rx";
 		};
 
-		rst: rstmgr@ffd05000 {
-			#reset-cells = <1>;
-			compatible = "altr,rst-mgr";
-			reg = <0xffd05000 0x1000>;
-		};
-
 		usbphy0: usbphy@0 {
 			#phy-cells = <0>;
 			compatible = "usb-nop-xceiv";
@@ -766,6 +831,8 @@
 			interrupts = <0 125 4>;
 			clocks = <&usb_mp_clk>;
 			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";
@@ -777,6 +844,8 @@
 			interrupts = <0 128 4>;
 			clocks = <&usb_mp_clk>;
 			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";
@@ -797,10 +866,5 @@
 			clocks = <&osc1>;
 			status = "disabled";
 		};
-
-		sysmgr: sysmgr@ffd08000 {
-			compatible = "altr,sys-mgr", "syscon";
-			reg = <0xffd08000 0x4000>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 4779b0731..94000cbe5 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -16,6 +16,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
 
 / {
 	#address-cells = <1>;
@@ -57,7 +58,7 @@
 		ranges;
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -72,10 +73,13 @@
 					     <0 87 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 88 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 89 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
+					     <0 90 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 91 IRQ_TYPE_LEVEL_HIGH>;
 				#dma-cells = <1>;
 				#dma-channels = <8>;
 				#dma-requests = <32>;
+				clocks = <&l4_main_clk>;
+				clock-names = "apb_pclk";
 			};
 		};
 
@@ -356,6 +360,7 @@
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&sdmmc_free_clk>;
 						clk-gate = <0xC8 5>;
+						clk-phase = <0 135>;
 					};
 
 					qspi_clk: qspi_clk {
@@ -409,6 +414,8 @@
 			rx-fifo-depth = <16384>;
 			clocks = <&l4_mp_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -426,6 +433,8 @@
 			rx-fifo-depth = <16384>;
 			clocks = <&l4_mp_clk>;
 			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -509,6 +518,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02200 0x100>;
 			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -518,6 +528,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02300 0x100>;
 			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -527,6 +538,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02400 0x100>;
 			interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -536,6 +548,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02500 0x100>;
 			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -545,6 +558,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02600 0x100>;
 			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -553,12 +567,6 @@
 			reg = <0xffcfb100 0x80>;
 		};
 
-		sdramedac {
-			compatible = "altr,sdram-edac-a10";
-			altr,sdr-syscon = <&sdr>;
-			interrupts = <0 2 4>, <0 0 4>;
-		};
-
 		L2: l2-cache@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;
@@ -574,7 +582,7 @@
 			reg = <0xff808000 0x1000>;
 			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			fifo-depth = <0x400>;
-			clocks = <&l4_mp_clk>, <&sdmmc_free_clk>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
 			clock-names = "biu", "ciu";
 			status = "disabled";
 		};
@@ -584,10 +592,60 @@
 			reg = <0xffe00000 0x40000>;
 		};
 
+		eccmgr: eccmgr@ffd06000 {
+			compatible = "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-a10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+					     <49 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			l2-ecc@ffd06010 {
+				compatible = "altr,socfpga-a10-l2-ecc";
+				reg = <0xffd06010 0x4>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+					     <32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ocram-ecc@ff8c3000 {
+				compatible = "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8c3000 0x400>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+					     <33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-rx-ecc@ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		rst: rstmgr@ffd05000 {
 			#reset-cells = <1>;
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x100>;
+			altr,modrst-offset = <0x20>;
 		};
 
 		scu: snoop-control-unit@ffffc000 {
@@ -647,6 +705,7 @@
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -672,6 +731,8 @@
 			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&usb_clk>;
 			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";
@@ -681,6 +742,10 @@
 			compatible = "snps,dwc2";
 			reg = <0xffb40000 0xffff>;
 			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 94a0709b2..8e3a4adc3 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -20,8 +20,14 @@
 	model = "Altera SOCFPGA Arria 10";
 	compatible = "altr,socfpga-arria10", "altr,socfpga";
 
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart1;
+	};
+
 	chosen {
-		bootargs = "console=ttyS0,115200 rootwait";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -69,6 +75,33 @@
 	status = "okay";
 };
 
+&i2c1 {
+	speed-mode = <0>;
+	status = "okay";
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <6000>;
+	i2c-scl-falling-time-ns = <6000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
 &uart1 {
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
index dbbb751ac..8a7dfa473 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -21,6 +21,7 @@
 &mmc {
 	status = "okay";
 	num-slots = <1>;
+	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
 };
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index ccaf41742..3c8867862 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -22,7 +22,8 @@
 	compatible = "altr,socfpga-arria5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -78,6 +79,7 @@
 &mmc0 {
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
 };
 
 &usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index 06db951e0..a05e3df23 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -38,12 +38,6 @@
 			cap-sd-highspeed;
 		};
 
-		ethernet@ff702000 {
-			phy-mode = "rgmii";
-			phy-addr = <0xffffffff>; /* probe for phy addr */
-			status = "okay";
-		};
-
 		sysmgr@ffd08000 {
 			cpu1-start-addr = <0xffd080c4>;
 		};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
new file mode 100644
index 000000000..afea3645a
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -0,0 +1,112 @@
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic DE-0(Atlas)";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 24 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+
+	max-frame-size = <3800>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	speed-mode = <0>;
+
+	adxl345: adxl345@0 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/mach-uniphier/uniphier.c b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
index 9be10efac..f86f9c060 100644
--- a/arch/arm/mach-uniphier/uniphier.c
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -10,21 +10,25 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include <asm/mach/arch.h>
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "DENX MCV";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
 
-static const char * const uniphier_dt_compat[] __initconst = {
-	"socionext,ph1-sld3",
-	"socionext,ph1-ld4",
-	"socionext,ph1-pro4",
-	"socionext,ph1-sld8",
-	"socionext,ph1-pro5",
-	"socionext,proxstream2",
-	"socionext,ph1-ld6b",
-	NULL,
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GiB */
+	};
 };
 
-DT_MACHINE_START(UNIPHIER, "Socionext UniPhier")
-	.dt_compat	= uniphier_dt_compat,
-MACHINE_END
+&mmc0 {	/* On-SoM eMMC */
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 000000000..7186a29b8
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+	model = "DENX MCV EVK";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		stmpe-i2c0 = &stmpe1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {	/* GPIO  0 ... 28 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 29 ... 57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	speed-mode = <0>;
+
+	stmpe1: stmpe811@41 {
+		compatible = "st,stmpe811";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-gpio = <&portb 28 0x4>;     /* GPIO 57, trig. level HI */
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			reg = <0>;
+			ts,sample-time = <4>;
+			ts,mod-12b = <1>;
+			ts,ref-sel = <0>;
+			ts,adc-freq = <1>;
+			ts,ave-ctrl = <1>;
+			ts,touch-det-delay = <3>;
+			ts,settling = <4>;
+			ts,fraction-z = <7>;
+			ts,i-drive = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 258865da8..15e43f43f 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -22,7 +22,8 @@
 	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -83,6 +84,7 @@
 	cd-gpios = <&portb 18 0>;
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
 };
 
 &usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 5e17fd147..02e22f554 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -22,7 +22,8 @@
 	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -38,6 +39,90 @@
 		ethernet0 = &gmac1;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:blue:led0";
+			gpios = <&portb 24 0>;	/* HPS_GPIO53 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led1 {
+			label = "hps:blue:led1";
+			gpios = <&portb 25 0>;	/* HPS_GPIO54 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led2 {
+			label = "hps:blue:led2";
+			gpios = <&portb 26 0>;	/* HPS_GPIO55 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led3 {
+			label = "hps:blue:led3";
+			gpios = <&portb 27 0>;	/* HPS_GPIO56 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_sw0 {
+			label = "hps_sw0";
+			gpios = <&portc 20 0>;	/* HPS_GPI7 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x0>;	/* SW_LID */
+		};
+
+		hps_sw1 {
+			label = "hps_sw1";
+			gpios = <&portc 19 0>;	/* HPS_GPI6 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x5>;	/* SW_DOCK */
+		};
+
+		hps_sw2 {
+			label = "hps_sw2";
+			gpios = <&portc 18 0>;	/* HPS_GPI5 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xa>;	/* SW_KEYPAD_SLIDE */
+		};
+
+		hps_sw3 {
+			label = "hps_sw3";
+			gpios = <&portc 17 0>;	/* HPS_GPI4 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xc>;	/* SW_ROTATE_LOCK */
+		};
+
+		hps_hkey0 {
+			label = "hps_hkey0";
+			gpios = <&portc 21 1>;	/* HPS_GPI8 */
+			linux,code = <187>;	/* KEY_F17 */
+		};
+
+		hps_hkey1 {
+			label = "hps_hkey1";
+			gpios = <&portc 22 1>;	/* HPS_GPI9 */
+			linux,code = <188>;	/* KEY_F18 */
+		};
+
+		hps_hkey2 {
+			label = "hps_hkey2";
+			gpios = <&portc 23 1>;	/* HPS_GPI10 */
+			linux,code = <189>;	/* KEY_F19 */
+		};
+
+		hps_hkey3 {
+			label = "hps_hkey3";
+			gpios = <&portc 24 1>;	/* HPS_GPI11 */
+			linux,code = <190>;	/* KEY_F20 */
+		};
+	};
+
 	regulator_3_3v: vcc3p3-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3P3";
@@ -60,7 +145,15 @@
 	rxc-skew-ps = <2000>;
 };
 
-&gpio2 {
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
 	status = "okay";
 };
 
@@ -79,6 +172,7 @@
 &mmc0 {
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
 };
 
 &usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 019dd2fea..d79853775 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -36,6 +36,7 @@
 };
 
 &gmac1 {
+	phy-mode = "rgmii";
 	status = "okay";
 };
 
@@ -51,7 +52,7 @@
 	status = "okay";
 
 	rtc: rtc@68 {
-		compatible = "stm,m41t82";
+		compatible = "st,m41t82";
 		reg = <0x68>;
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
new file mode 100644
index 000000000..b84447360
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -0,0 +1,311 @@
+/*
+ *  Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "samtec VIN|ING FPGA";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/*
+		 * This allow the ethaddr uboot environment variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:green:led0";	/* ALIVE_LED_GR */
+			gpios = <&portb 19 0>;	/* HPS_GPIO48 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led1 {
+			label = "hps:red:led0";		/* ALIVE_LED_RD */
+			gpios = <&portb 24 0>;	/* HPS_GPIO53 */
+			linux,default-trigger = "none";
+		};
+
+		hps_led2 {
+			label = "hps:green:led1";	/* LINK2HOST_LED_GR */
+			gpios = <&portb 25 0>;	/* HPS_GPIO54 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led3 {
+			label = "hps:red:led1";		/* LINK2HOST_LED_RD */
+			gpios = <&portc 7 0>;	/* HPS_GPIO65 */
+			linux,default-trigger = "none";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_temp0 {
+			label = "BTN_0";			/* TEMP_OS */
+			gpios = <&portc 18 GPIO_ACTIVE_LOW>;	/* HPS_GPIO60 */
+			linux,code = <BTN_0>;
+		};
+
+		hps_hkey0 {
+			label = "BTN_1";			/* DIS_PWR */
+			gpios = <&portc 19 GPIO_ACTIVE_LOW>;	/* HPS_GPIO61 */
+			linux,code = <BTN_1>;
+		};
+
+		hps_hkey1 {
+			label = "hps_hkey1";			/* POWER_DOWN */
+			gpios = <&portc 20 GPIO_ACTIVE_LOW>;	/* HPS_GPIO62 */
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	regulator-usb-nrst {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_nrst";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
+
+	snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <10000 10000 10000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <2600>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <2000>;
+		};
+	};
+};
+
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio: pca9557@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	at24@50 {
+		compatible = "at24,24c01";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+
+	i2cswitch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@51 {
+				compatible = "at,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "at,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "at,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@51 {
+				compatible = "at,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			eeprom@51 {
+				compatible = "at,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			eeprom@51 {
+				compatible = "at,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			eeprom@51 {
+				compatible = "at,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			eeprom@51 {
+				compatible = "at,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index e48857249..84101e4ee 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -161,7 +161,7 @@
 				linux,code = <0x100>;
 				gpios = <&gpio0 7 0x4>;
 				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
+				wakeup-source;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index c611f5606..6565f3cb8 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -223,7 +223,7 @@
 				linux,code = <0x100>;
 				gpios = <&gpio1 1 0x4>;
 				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
+				wakeup-source;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 14594ce8c..449acf0d8 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -117,7 +117,7 @@
 			chan_priority = <1>;
 			block_size = <0xfff>;
 			dma-masters = <2>;
-			data_width = <3 3>;
+			data-width = <8 8>;
 		};
 
 		dma@eb000000 {
@@ -133,7 +133,7 @@
 			chan_allocation_order = <1>;
 			chan_priority = <1>;
 			block_size = <0xfff>;
-			data_width = <3 3>;
+			data-width = <8 8>;
 		};
 
 		fsmc: flash@b0000000 {
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 0aa6fef5c..0d0da1f65 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -141,7 +141,7 @@
 				linux,code = <0x100>;
 				gpios = <&stmpegpio 3 0x4>;
 				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
+				wakeup-source;
 			};
 
 			button@2 {
@@ -149,7 +149,7 @@
 				linux,code = <0x200>;
 				gpios = <&stmpegpio 2 0x4>;
 				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
+				wakeup-source;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index c8b815819..b3b9bb8e1 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -49,7 +49,7 @@
 			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
-			cd-gpios  = <&gpio7 6 0x4>; // 230
+			cd-gpios  = <&gpio7 6 GPIO_ACTIVE_HIGH>; // 230
 			cd-inverted;
 
 			status = "okay";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index b8f81fb41..d309314f3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -10,8 +10,10 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mfd/dbx500-prcmu.h>
 #include <dt-bindings/arm/ux500_pm_domains.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "skeleton.dtsi"
 
 / {
@@ -203,14 +205,14 @@
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
 			reg = <0xa0412000 0x1000>;
-			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-level = <2>;
 		};
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pm_domains: pm_domains0 {
@@ -220,6 +222,13 @@
 
 		clocks {
 			compatible = "stericsson,u8500-clks";
+			/*
+			 * Registers for the CLKRST block on peripheral
+			 * groups 1, 2, 3, 5, 6,
+			 */
+			reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+			    <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+			    <0xa03cf000 0x1000>;
 
 			prcmu_clk: prcmu-clock {
 				#clock-cells = <1>;
@@ -246,7 +255,7 @@
 			/* Nomadik System Timer */
 			compatible = "st,nomadik-mtu";
 			reg = <0xa03c6000 0x1000>;
-			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
 			clock-names = "timclk", "apb_pclk";
@@ -255,7 +264,7 @@
 		timer@a0410600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xa0410600 0x20>;
-			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 
 			clocks = <&smp_twd_clk>;
 		};
@@ -263,14 +272,14 @@
 		watchdog@a0410620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xa0410620 0x20>;
-			interrupts = <1 14 0x304>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&smp_twd_clk>;
 		};
 
 		rtc@80154000 {
 			compatible = "arm,rtc-pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
-			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&rtc_clk>;
 			clock-names = "apb_pclk";
@@ -280,14 +289,14 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8012e000 0x80>;
-			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <0>;
-
+			gpio-ranges = <&pinctrl 0 0 32>;
 			clocks = <&prcc_pclk 1 9>;
 		};
 
@@ -295,14 +304,14 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8012e080 0x80>;
-			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <1>;
-
+			gpio-ranges = <&pinctrl 0 32 5>;
 			clocks = <&prcc_pclk 1 9>;
 		};
 
@@ -310,14 +319,14 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e000 0x80>;
-			interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <2>;
-
+			gpio-ranges = <&pinctrl 0 64 32>;
 			clocks = <&prcc_pclk 3 8>;
 		};
 
@@ -325,14 +334,14 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e080 0x80>;
-			interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <3>;
-
+			gpio-ranges = <&pinctrl 0 96 2>;
 			clocks = <&prcc_pclk 3 8>;
 		};
 
@@ -340,14 +349,14 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e100 0x80>;
-			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <4>;
-
+			gpio-ranges = <&pinctrl 0 128 32>;
 			clocks = <&prcc_pclk 3 8>;
 		};
 
@@ -355,14 +364,14 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e180 0x80>;
-			interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <5>;
-
+			gpio-ranges = <&pinctrl 0 160 12>;
 			clocks = <&prcc_pclk 3 8>;
 		};
 
@@ -370,14 +379,14 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8011e000 0x80>;
-			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <6>;
-
+			gpio-ranges = <&pinctrl 0 192 32>;
 			clocks = <&prcc_pclk 2 11>;
 		};
 
@@ -385,14 +394,14 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8011e080 0x80>;
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <7>;
-
+			gpio-ranges = <&pinctrl 0 224 7>;
 			clocks = <&prcc_pclk 2 11>;
 		};
 
@@ -400,26 +409,29 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0xa03fe000 0x80>;
-			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <8>;
-
+			gpio-ranges = <&pinctrl 0 256 12>;
 			clocks = <&prcc_pclk 5 1>;
 		};
 
-		pinctrl {
+		pinctrl: pinctrl {
 			compatible = "stericsson,db8500-pinctrl";
+			nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>,
+						<&gpio4>, <&gpio5>, <&gpio6>, <&gpio7>,
+						<&gpio8>;
 			prcm = <&prcmu>;
 		};
 
 		usb_per5@a03e0000 {
 			compatible = "stericsson,db8500-musb";
 			reg = <0xa03e0000 0x10000>;
-			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc";
 
 			dr_mode = "otg";
@@ -457,7 +469,7 @@
 			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
 			reg = <0x801C0000 0x1000 0x40010000 0x800>;
 			reg-names = "base", "lcpa";
-			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 
 			#dma-cells = <3>;
 			memcpy-channels = <56 57 58 59 60>;
@@ -469,7 +481,7 @@
 			compatible = "stericsson,db8500-prcmu";
 			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
 			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			interrupt-controller;
@@ -502,63 +514,51 @@
 
 				// DB8500_REGULATOR_VAPE
 				db8500_vape_reg: db8500_vape {
-					regulator-compatible = "db8500_vape";
 					regulator-always-on;
 				};
 
 				// DB8500_REGULATOR_VARM
 				db8500_varm_reg: db8500_varm {
-					regulator-compatible = "db8500_varm";
 				};
 
 				// DB8500_REGULATOR_VMODEM
 				db8500_vmodem_reg: db8500_vmodem {
-					regulator-compatible = "db8500_vmodem";
 				};
 
 				// DB8500_REGULATOR_VPLL
 				db8500_vpll_reg: db8500_vpll {
-					regulator-compatible = "db8500_vpll";
 				};
 
 				// DB8500_REGULATOR_VSMPS1
 				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-compatible = "db8500_vsmps1";
 				};
 
 				// DB8500_REGULATOR_VSMPS2
 				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-compatible = "db8500_vsmps2";
 				};
 
 				// DB8500_REGULATOR_VSMPS3
 				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-compatible = "db8500_vsmps3";
 				};
 
 				// DB8500_REGULATOR_VRF1
 				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-compatible = "db8500_vrf1";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAMMDSP
 				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-compatible = "db8500_sva_mmdsp";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
 				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-compatible = "db8500_sva_mmdsp_ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAPIPE
 				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-compatible = "db8500_sva_pipe";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAMMDSP
 				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-compatible = "db8500_sia_mmdsp";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
@@ -567,50 +567,44 @@
 
 				// DB8500_REGULATOR_SWITCH_SIAPIPE
 				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-compatible = "db8500_sia_pipe";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SGA
 				db8500_sga_reg: db8500_sga {
-					regulator-compatible = "db8500_sga";
 					vin-supply = <&db8500_vape_reg>;
 				};
 
 				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
 				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-compatible = "db8500_b2r2_mcde";
 					vin-supply = <&db8500_vape_reg>;
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM12
 				db8500_esram12_reg: db8500_esram12 {
-					regulator-compatible = "db8500_esram12";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM12RET
 				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-compatible = "db8500_esram12_ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM34
 				db8500_esram34_reg: db8500_esram34 {
-					regulator-compatible = "db8500_esram34";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM34RET
 				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-compatible = "db8500_esram34_ret";
 				};
 			};
 
 			ab8500 {
 				compatible = "stericsson,ab8500";
 				interrupt-parent = <&intc>;
-				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
 				ab8500_gpio: ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
@@ -711,7 +705,6 @@
 					compatible = "stericsson,ab8500-ext-regulator";
 
 					ab8500_ext1_reg: ab8500_ext1 {
-						regulator-compatible = "ab8500_ext1";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <1800000>;
 						regulator-boot-on;
@@ -719,7 +712,6 @@
 					};
 
 					ab8500_ext2_reg: ab8500_ext2 {
-						regulator-compatible = "ab8500_ext2";
 						regulator-min-microvolt = <1360000>;
 						regulator-max-microvolt = <1360000>;
 						regulator-boot-on;
@@ -727,7 +719,6 @@
 					};
 
 					ab8500_ext3_reg: ab8500_ext3 {
-						regulator-compatible = "ab8500_ext3";
 						regulator-min-microvolt = <3400000>;
 						regulator-max-microvolt = <3400000>;
 						regulator-boot-on;
@@ -740,7 +731,6 @@
 
 					// supplies to the display/camera
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-compatible = "ab8500_ldo_aux1";
 						regulator-min-microvolt = <2500000>;
 						regulator-max-microvolt = <2900000>;
 						regulator-boot-on;
@@ -750,56 +740,46 @@
 
 					// supplies to the on-board eMMC
 					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-compatible = "ab8500_ldo_aux2";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <3300000>;
 					};
 
 					// supply for VAUX3; SDcard slots
 					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-compatible = "ab8500_ldo_aux3";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <3300000>;
 					};
 
 					// supply for v-intcore12; VINTCORE12 LDO
 					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-compatible = "ab8500_ldo_intcore";
 					};
 
 					// supply for tvout; gpadc; TVOUT LDO
 					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-compatible = "ab8500_ldo_tvout";
 					};
 
 					// supply for ab8500-usb; USB LDO
 					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-compatible = "ab8500_ldo_usb";
 					};
 
 					// supply for ab8500-vaudio; VAUDIO LDO
 					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-compatible = "ab8500_ldo_audio";
 					};
 
 					// supply for v-anamic1 VAMIC1 LDO
 					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-compatible = "ab8500_ldo_anamic1";
 					};
 
 					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
 					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-compatible = "ab8500_ldo_anamic2";
 					};
 
 					// supply for v-dmic; VDMIC LDO
 					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-compatible = "ab8500_ldo_dmic";
 					};
 
 					// supply for U8500 CSI/DSI; VANA LDO
 					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-compatible = "ab8500_ldo_ana";
 					};
 				};
 			};
@@ -808,7 +788,7 @@
 		i2c@80004000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
-			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -823,7 +803,7 @@
 		i2c@80122000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
-			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -839,7 +819,7 @@
 		i2c@80128000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
-			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -855,7 +835,7 @@
 		i2c@80110000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
-			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -871,7 +851,7 @@
 		i2c@8012a000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
-			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -887,7 +867,7 @@
 		ssp@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
-			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
@@ -901,7 +881,7 @@
 		ssp@80003000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80003000 0x1000>;
-			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
@@ -915,7 +895,7 @@
 		spi@8011a000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x8011a000 0x1000>;
-			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
@@ -930,7 +910,7 @@
 		spi@80112000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80112000 0x1000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
@@ -945,7 +925,7 @@
 		spi@80111000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80111000 0x1000>;
-			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
@@ -960,7 +940,7 @@
 		spi@80129000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80129000 0x1000>;
-			interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
@@ -975,7 +955,7 @@
 		ux500_serial0: uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
-			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
 			       <&dma 13 0 0x0>; /* Logical - MemToDev */
@@ -990,7 +970,7 @@
 		ux500_serial1: uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
-			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
 			       <&dma 12 0 0x0>; /* Logical - MemToDev */
@@ -1005,7 +985,7 @@
 		ux500_serial2: uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
-			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
 			       <&dma 11 0 0x0>; /* Logical - MemToDev */
@@ -1020,7 +1000,7 @@
 		sdi0_per1@80126000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
-			interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
 			       <&dma 29 0 0x0>; /* Logical - MemToDev */
@@ -1036,7 +1016,7 @@
 		sdi1_per2@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
-			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
 			       <&dma 32 0 0x0>; /* Logical - MemToDev */
@@ -1052,7 +1032,7 @@
 		sdi2_per3@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
-			interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
 			       <&dma 28 0 0x0>; /* Logical - MemToDev */
@@ -1068,7 +1048,7 @@
 		sdi3_per2@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
-			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
 			       <&dma 41 0 0x0>; /* Logical - MemToDev */
@@ -1084,7 +1064,7 @@
 		sdi4_per2@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
-			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
 			       <&dma 42 0 0x0>; /* Logical - MemToDev */
@@ -1100,7 +1080,7 @@
 		sdi5_per3@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
-			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
 			       <&dma 43 0 0x0>; /* Logical - MemToDev */
@@ -1116,7 +1096,7 @@
 		msp0: msp@80123000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80123000 0x1000>;
-			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 
 			dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
@@ -1132,7 +1112,7 @@
 		msp1: msp@80124000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80124000 0x1000>;
-			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 
 			/* This DMA channel only exist on DB8500 v1 */
@@ -1149,7 +1129,7 @@
 		msp2: msp@80117000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80117000 0x1000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 
 			dmas = <&dma 14 0 0x12>, /* Logical  - DevToMem - HighPrio */
@@ -1166,7 +1146,7 @@
 		msp3: msp@80125000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80125000 0x1000>;
-			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 
 			/* This DMA channel only exist on DB8500 v2 */
@@ -1199,7 +1179,7 @@
 			      <0xa0351000 0x1000>, /* DSI link 1 */
 			      <0xa0352000 0x1000>, /* DSI link 2 */
 			      <0xa0353000 0x1000>; /* DSI link 3 */
-			interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
 				 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
 				 <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */
@@ -1213,7 +1193,7 @@
 		cryp@a03cb000 {
 			compatible = "stericsson,ux500-cryp";
 			reg = <0xa03cb000 0x1000>;
-			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 
 			v-ape-supply = <&db8500_vape_reg>;
 			clocks = <&prcc_pclk 6 1>;
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 78b75256c..6f7207560 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -22,13 +22,13 @@
 
 		button@139 {
 			/* Proximity sensor */
-			gpios = <&gpio6 25 0x4>;
+			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
 			linux,code = <11>; /* SW_FRONT_PROXIMITY */
 			label = "SFH7741 Proximity Sensor";
 		};
 		button@145 {
 			/* Hall sensor */
-			gpios = <&gpio4 17 0x4>;
+			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
 			linux,code = <0>; /* SW_LID */
 			label = "HED54XXU11 Hall Effect Sensor";
 		};
@@ -114,6 +114,8 @@
 				rohm,touch-max-x = <384>;
 				rohm,touch-max-y = <704>;
 				rohm,flip-y;
+				pinctrl-names = "default";
+				pinctrl-0 = <&touch_rohm_mode>;
 			};
 
 			bu21013_tp@5d {
@@ -124,6 +126,8 @@
 				rohm,touch-max-x = <384>;
 				rohm,touch-max-y = <704>;
 				rohm,flip-y;
+				pinctrl-names = "default";
+				pinctrl-0 = <&touch_rohm_mode>;
 			};
 		};
 
@@ -166,6 +170,25 @@
 					};
 				};
 			};
+			touch {
+				touch_rohm_mode: touch_rohm {
+					/*
+					 * ROHM touch screen uses GPIO 143 for
+					 * RST1, GPIO 146 for RST2 and
+					 * GPIO 67 for interrupts. Pull-up
+					 * the IRQ line and drive both
+					 * reset signals low.
+					 */
+					stuib_cfg1 {
+						pins = "GPIO143_D12", "GPIO146_D13";
+						ste,config = <&gpio_out_lo>;
+					};
+					stuib_cfg2 {
+						pins = "GPIO67_G2";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 0e1c96943..3c9f2f068 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -24,20 +24,19 @@
 
 		button@139 {
 			/* Proximity sensor */
-			gpios = <&gpio6 25 0x4>;
+			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
 			linux,code = <11>; /* SW_FRONT_PROXIMITY */
 			label = "SFH7741 Proximity Sensor";
 		};
 		button@145 {
 			/* Hall sensor */
-			gpios = <&gpio4 17 0x4>;
+			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
 			linux,code = <0>; /* SW_LID */
 			label = "HED54XXU11 Hall Effect Sensor";
 		};
 	};
 
 	soc {
-		/* Add Synaptics touch screen, TC35893 keypad etc here */
 		i2c@80004000 {
 			tc35893@44 {
 				compatible = "toshiba,tc35893";
@@ -66,7 +65,7 @@
 					keypad,num-columns = <8>;
 					keypad,num-rows = <8>;
 					linux,no-autorepeat;
-					linux,wakeup;
+					wakeup-source;
 					linux,keymap = <0x0301006b
 						        0x04010066
 							0x06040072
@@ -94,14 +93,23 @@
 				/* Accelerometer */
 				compatible = "st,lsm303dlh-accel";
 				st,drdy-int-pin = <1>;
+				drive-open-drain;
 				reg = <0x18>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_tvk_mode>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
-					     <19 IRQ_TYPE_EDGE_RISING>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+				 */
 			};
 			lsm303dlh@1e {
 				/* Magnetometer */
@@ -109,8 +117,51 @@
 				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+				 */
+			};
+			lis331dl@1c {
+				/* Accelerometer */
+				compatible = "st,lis331dl-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x1c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				/* INT2 would need to be open drain */
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+			};
+			ak8974@0f {
+				/* Magnetometer */
+				compatible = "asahi-kasei,ak8974";
+				reg = <0x0f>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+				dvdd-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&magneto_tvk_mode>;
+				pinctrl-0 = <&gyro_magn_tvk_mode>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>;
+				 */
 			};
 			l3g4200d@68 {
 				/* Gyroscope */
@@ -119,6 +170,11 @@
 				reg = <0x68>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gyro_magn_tvk_mode>;
+				interrupts-extended =
+				<&gpio1 0 IRQ_TYPE_EDGE_RISING>,
+				<&gpio0 31 IRQ_TYPE_EDGE_RISING>;
 			};
 			lsp001wm@5c {
 				/* Barometer/pressure sensor */
@@ -128,6 +184,33 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 			};
 		};
+
+		i2c@80110000 {
+			synaptics@4b {
+				/* Synaptics RMI4 TM1217 touchscreen */
+				compatible = "syna,rmi4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x4b>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&synaptics_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+
+				rmi-f01@1 {
+					reg = <0x1>;
+					syna,nosleep = <1>;
+				};
+				rmi-f11@11 {
+					reg = <0x11>;
+					touchscreen-inverted-x;
+					syna,sensor-type = <1>;
+				};
+			};
+		};
+
 		pinctrl {
 			/* Pull up this GPIO pin */
 			tc35893 {
@@ -159,23 +242,37 @@
 					/* Accelerometer interrupt lines 1 & 2 */
 					tvk_cfg {
 						pins = "GPIO82_C1", "GPIO83_D3";
-						ste,config = <&gpio_in_pu>;
+						ste,config = <&gpio_in_pd>;
 					};
 				};
 			};
-			magnetometer {
-				magneto_tvk_mode: magneto_tvk {
-					/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+			gyroscope {
+				/*
+				 * These lines are shared between Gyroscope l3g400dh
+				 * and AK8974 magnetometer.
+				 */
+				gyro_magn_tvk_mode: gyro_magn_tvk {
+					 /* GPIO 31 used for INT pull down the line */
 					tvk_cfg1 {
 						pins = "GPIO31_V3";
-						ste,config = <&gpio_in_pu>;
+						ste,config = <&gpio_in_pd>;
 					};
+					/* GPIO 32 used for DRDY, pull this down */
 					tvk_cfg2 {
 						pins = "GPIO32_V2";
 						ste,config = <&gpio_in_pd>;
 					};
 				};
 			};
+			synaptics {
+				synaptics_tvk_mode: synaptics_tvk {
+					/* Touchscreen uses GPIO 84 */
+					tvk_cfg1 {
+						pins = "GPIO84_C2";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 6d8ce1543..48dc38482 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -223,7 +223,6 @@
 		prcmu@80157000 {
 			ab8500 {
 				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
 				};
 
 				ab8500-regulators {
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index b0278f4c4..ece222d51 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -18,7 +18,7 @@
 / {
 	gpio_keys {
 		button@1 {
-			gpios = <&tc3589x_gpio 7 0x4>;
+			gpios = <&tc3589x_gpio 7 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -68,12 +68,12 @@
 
 		// External Micro SD slot
 		sdi0_per1@80126000 {
-			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+			cd-gpios  = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		vmmci: regulator-gpio {
-			gpios = <&tc3589x_gpio 18 0x4>;
-			enable-gpio = <&tc3589x_gpio 17 0x4>;
+			gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
 		};
 
 		pinctrl {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 810cda743..718767683 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -18,14 +18,134 @@
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
 	soc {
+		/* Name the GPIO muxed rails on the HREF boards */
+		gpio@8012e000 {
+			/* GPIOs 0 - 31 */
+			gpio-line-names =
+				     /* GPIO0,1 used for UART0 BT RX/TX */
+				     "", "",
+				     "UART_WAKE",
+				     "BT_WAKE",
+				     "",
+				     "SDMMC_1V8_3V_SEL",
+				     "FLASH_LED_SYNC (FLASH_CTRL_0)",
+				     "XENON_READY (FLASH_CTRL_1)",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "",
+				     "",
+				     "FLASH_LED_EN (FLASH_CTRL_3)",
+				     "", "",
+				     "", "", "", "", "",
+				     /* Used by UART2 (console) */
+				     "", "",
+				     "MAGNETOMETER_INT";
+		};
+
+		gpio@8012e080 {
+			/* GPIOs 32 - 63 */
+			gpio-line-names =
+				     "MAGNETOMETER_DRDY",
+				     "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e000 {
+			/* GPIOs 64 - 95 */
+			gpio-line-names = "XENON_EN2 (FLASH_CTRL_4)",
+				     "DISP1_RST",
+				     "DISP2_RST",
+				     "TOUCH_INT2",
+				     "LCD_VSI0_A",
+				     "LCD_VSI1_A",
+				     /* GPIO 70-77 used for ETM */
+				     "", "", "", "", "", "", "", "",
+				     /* GPIO 78-81 used for YCBCR */
+				     "", "", "", "",
+				     "ACCELEROMETER_INT1_RDY",
+				     "ACCELEROMETER_INT2",
+				     "TOUCH_INT",
+				     "WLAN_ENA",
+				     "", "", "", "", "",
+				     "FORCE_SENSING_INT",
+				     "FORCE_SENSING_RESET",
+				     "", "",
+				     "SDMMC_CD";
+		};
+
+		gpio@8000e080 {
+			/* GPIOs 96 - 127 */
+			gpio-line-names = "",
+				     "FORCE_SENSING_WU",
+				     "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e100 {
+			/* GPIOs 128 - 159 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "", "", "",
+				     "DIPRO_INT", /* GPIO139 */
+				     "XSHUTDOWN_SECONDARY_SENSOR",
+				     "XSHUTDOWN_PRIMARY_SENSOR",
+				     "NFC_RST (NFC_CTRL_",
+				     "TOUCH_RST",
+				     "NFC_IRQ (NFC_CTRL_1)",
+				     "HAL_SW",
+				     "TOUCH_RST2",
+				     "", "",
+				     "VAUDIO_HF_EN", /* GPIO149 */
+				     "", "", "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e180 {
+			/* GPIOs 160 - 191 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "",
+				     "SDMMC_EN",
+				     "XENON_CHARGE (FLASH_CONTROL_5)",
+				     "GBF_ENA_RESET",
+				     "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8011e000 {
+			/* GPIOs 192 - 223 */
+			gpio-line-names = "HDTV_INTN",
+				     "", "", "",
+				     "HDTV_RSTN",
+				     "", "", "",
+				     "", /* GPIO200 */
+				     "", "", "", "", "", "", "",
+				     /* GPIO208-216 used for WGBF_MC1 */
+				     "", "", "", "", "", "", "", "", "",
+				     "SW_FRONT_PROXIMITY", /* GPIO217 */
+				     "KPD_CTRL_INT", /* Keypad controller */
+				     "", "", "", "", "";
+		};
+
+		gpio@8011e080 {
+			/* GPIOs 224 - 255 */
+			gpio-line-names = "", "",
+				     "HSIT_ACWAKE0",
+				     "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
 		// External Micro SD slot
 		sdi0_per1@80126000 {
-			cd-gpios  = <&gpio2 31 0x4>; // 95
+			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
 		};
 
 		vmmci: regulator-gpio {
-			gpios = <&gpio0 5 0x4>;
-			enable-gpio = <&gpio5 9 0x4>;
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		pinctrl {
@@ -43,7 +163,6 @@
 				  <&vaudio_hf_hrefv60_mode>,
 				  <&gbf_hrefv60_mode>,
 				  <&hdtv_hrefv60_mode>,
-				  <&touch_hrefv60_mode>,
 				  <&gpios_hrefv60_mode>;
 
 			sdi0 {
@@ -56,7 +175,7 @@
 					/* VMMCI level-shifter enable */
 					default_hrefv60_cfg2 {
 						pins = "GPIO169_D22";
-						ste,config = <&gpio_out_lo>;
+						ste,config = <&gpio_out_hi>;
 					};
 					/* VMMCI level-shifter voltage select */
 					default_hrefv60_cfg3 {
@@ -190,23 +309,6 @@
 					};
 				 };
 			};
-			touch {
-				touch_hrefv60_mode: touch_hrefv60 {
-					/*
-					 * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
-					 * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
-					 * reset signals low.
-					 */
-					hrefv60_cfg1 {
-						pins = "GPIO143_D12", "GPIO146_D13";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						pins = "GPIO67_G2";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
 			mcde {
 				lcd_hrefv60_mode: lcd_hrefv60 {
 					/*
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index 3d25dba14..d35aa8879 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -17,12 +17,22 @@
 	};
 
 	aliases {
+		serial0 = &uart0;
 		serial1 = &uart1;
 		stmpe-i2c0 = &stmpe0;
 		stmpe-i2c1 = &stmpe1;
 	};
 
 	pinctrl {
+		uart0 {
+			uart0_nhk_mode: uart0_mux {
+				u0_default_mux {
+					function = "u0";
+					groups = "u0txrx_a_1", "u0ctsrts_a_1";
+				};
+			};
+		};
+
 		stmpe2401_1 {
 			stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
 				nhk_cfg1 {
@@ -47,8 +57,15 @@
 				};
 			};
 		};
+		lis3lv02dl {
+			lis3lv02dl_nhk_mode: lis3lv02dl_nhk {
+				nhk_cfg1 {
+					pins = "GPIO82_C10"; // IRQ line
+					ste,input = <0>;
+				};
+			};
+		};
 	};
-
 	src@101e0000 {
 		/* These chrystal outputs are not used on this board */
 		disable-sxtalo;
@@ -73,6 +90,15 @@
 	};
 
 	i2c0 {
+		lis3lv02dl@1d {
+			/* Accelerometer */
+			compatible = "st,lis3lv02dl-accel";
+			interrupt-parent = <&gpio2>;
+			interrupts = <18 IRQ_TYPE_EDGE_RISING>; // GPIO 82
+			pinctrl-0 = <&lis3lv02dl_nhk_mode>;
+			pinctrl-names = "default";
+			reg = <0x1d>;
+		};
 		stmpe0: stmpe2401@43 {
 			compatible = "st,stmpe2401";
 			reg = <0x43>;
@@ -131,22 +157,30 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				/*
+				 * This will turn off SATA so that MMC/SD
+				 * can thrive
+				 */
+				mmcsd-gpio {
+					gpio-hog;
+					gpios = <2 0x0>;
+					output-low;
+					line-name = "SATA EN";
+				};
 			};
 		};
 	};
 
 	amba {
+		/* Activate RX/TX and CTS/RTS on UART 0 */
+		uart0: uart@101fd000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_nhk_mode>;
+			status = "okay";
+		};
 		mmcsd: sdi@101f6000 {
 			cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>;
 			wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	/* Custom board node with GPIO pins to active etc */
-	usb-s8815 {
-		/* This will turn off SATA so that MMC/SD can thrive */
-		mmcsd-gpio {
-			gpios = <&stmpe_gpio44 2 0x1>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 3c140d05f..789329030 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -16,9 +16,20 @@
 	};
 
 	aliases {
+		serial0 = &uart0;
 		serial1 = &uart1;
 	};
 
+	gpio3: gpio@101e7000 {
+		/* This hog will bias the MMC/SD card detect line */
+		mmcsd-gpio {
+			gpio-hog;
+			gpios = <16 0x0>;
+			output-low;
+			line-name = "card detect bias";
+		};
+	};
+
 	src@101e0000 {
 		/* These chrystal drivers are not used on this board */
 		disable-sxtalo;
@@ -30,6 +41,15 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&cd_default_mode>;
 
+		uart0 {
+			/* Only use RX/TX pins */
+			uart0_s8815_mode: uart0_mux {
+				u0_default_mux {
+					function = "u0";
+					groups = "u0txrx_a_1";
+				};
+			};
+		};
 		mmcsd-cd {
 			cd_default_mode: cd_default {
 				cd_default_cfg1 {
@@ -85,6 +105,14 @@
 		};
 	};
 
+	i2c1 {
+		lis3lv02dl@1d {
+			/* Accelerometer */
+			compatible = "st,lis3lv02dl-accel";
+			reg = <0x1d>;
+		};
+	};
+
 	/* GPIO I2C connected to the USB portions of the STw4811 only */
 	gpio-i2c {
 		compatible = "i2c-gpio";
@@ -102,21 +130,19 @@
 	};
 
 
-	/* Configure card detect for the uSD slot */
 	amba {
+		/* Activate RXTX on UART 0 */
+		uart0: uart@101fd000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_s8815_mode>;
+			status = "okay";
+		};
+		/* Configure card detect for the uSD slot */
 		mmcsd: sdi@101f6000 {
 			cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	/* Custom board node with GPIO pins to active etc */
-	usb-s8815 {
-		/* This will bias the MMC/SD card detect line */
-		mmcsd-gpio {
-			gpios = <&gpio3 16 0x1>;
-		};
-	};
-
 	/* The user LED on the board is set up to be used for heartbeat */
 	leds {
 		compatible = "gpio-leds";
@@ -137,7 +163,7 @@
 			label = "user_button";
 			gpios = <&gpio0 3 0x1>;
 			linux,code = <1>; /* KEY_ESC */
-			gpio-key,wakeup;
+			wakeup-source;
 			pinctrl-names = "default";
 			pinctrl-0 = <&user_button_default_mode>;
 		};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index ef794a33b..d2d532a9d 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -21,6 +21,13 @@
 		interrupts = <30>;
 		cache-unified;
 		cache-level = <2>;
+		cache-size = <131072>;
+		cache-sets = <512>;
+		cache-line-size = <32>;
+		/* At full speed latency must be >=2 */
+		arm,tag-latency = <8>;
+		arm,data-latency = <8 8>;
+		arm,dirty-latency = <8>;
 	};
 
 	mtu0: mtu@101e2000 {
@@ -52,6 +59,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-bank = <0>;
+		gpio-ranges = <&pinctrl 0 0 32>;
 		clocks = <&pclk>;
 	};
 
@@ -65,6 +73,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-bank = <1>;
+		gpio-ranges = <&pinctrl 0 32 32>;
 		clocks = <&pclk>;
 	};
 
@@ -78,12 +87,14 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-bank = <2>;
+		gpio-ranges = <&pinctrl 0 64 32>;
 		clocks = <&pclk>;
 	};
 
 	gpio3: gpio@101e7000 {
 		compatible = "st,nomadik-gpio";
 		reg =  <0x101e7000 0x80>;
+		ngpio = <28>;
 		interrupt-parent = <&vica>;
 		interrupts = <9>;
 		interrupt-controller;
@@ -91,20 +102,14 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-bank = <3>;
+		gpio-ranges = <&pinctrl 0 96 28>;
 		clocks = <&pclk>;
 	};
 
-	pinctrl {
+	pinctrl: pinctrl {
 		compatible = "stericsson,stn8815-pinctrl";
+		nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>;
 		/* Pin configurations */
-		uart0 {
-			uart0_default_mux: uart0_mux {
-				u0_default_mux {
-					function = "u0";
-					groups = "u0_a_1";
-				};
-			};
-		};
 		uart1 {
 			uart1_default_mux: uart1_mux {
 				u1_default_mux {
@@ -122,22 +127,14 @@
 			};
 			mmcsd_default_mode: mmcsd_default {
 				mmcsd_default_cfg1 {
-					/* MCCLK */
-					pins = "GPIO8_B10";
-					ste,output = <0>;
-				};
-				mmcsd_default_cfg2 {
-					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
-					pins = "GPIO10_C11", "GPIO15_A12",
-					"GPIO16_C13", "GPIO23_D15";
-					ste,output = <1>;
-				};
-				mmcsd_default_cfg3 {
-					/* MCCMD, MCDAT3-0, MCMSFBCLK */
-					pins = "GPIO9_A10", "GPIO11_B11",
-					"GPIO12_A11", "GPIO13_C12",
-					"GPIO14_B12", "GPIO24_C15";
-					ste,input = <1>;
+					/*
+					 * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
+					 * MCCMD, MCDAT3-0, MCMSFBCLK
+					 */
+					pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
+					       "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
+					       "GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
+					ste,output = <2>;
 				};
 			};
 		};
@@ -721,15 +718,10 @@
 			   compatible = "st,stw5095";
 			   reg = <0x1a>;
 		};
-		lis3lv02dl@1d {
-			/* Accelerometer */
-			compatible = "st,lis3lv02dl-accel";
-			reg = <0x1d>;
-		};
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -755,9 +747,10 @@
 			interrupts = <12>;
 			clocks = <&uart0clk>, <&pclkuart0>;
 			clock-names = "uartclk", "apb_pclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_default_mux>;
 			status = "disabled";
+			dmas = <&dmac0 14 1>,
+			       <&dmac0 15 1>;
+			dma-names = "rx", "tx";
 		};
 
 		uart1: uart@101fb000 {
@@ -769,6 +762,9 @@
 			clock-names = "uartclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart1_default_mux>;
+			dmas = <&dmac1 22 1>,
+			       <&dmac1 23 1>;
+			dma-names = "rx", "tx";
 		};
 
 		uart2: uart@101f2000 {
@@ -779,6 +775,9 @@
 			clocks = <&uart2clk>, <&pclkuart2>;
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
+			dmas = <&dmac1 30 1>,
+			       <&dmac1 31 1>;
+			dma-names = "rx", "tx";
 		};
 
 		rng: rng@101b0000 {
@@ -804,13 +803,53 @@
 			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;
-			max-frequency = <48000000>;
+			max-frequency = <400000>;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			full-pwr-cycle;
+			/*
+			 * The STw4811 circuit used with the Nomadik strictly
+			 * requires that all of these signal direction pins be
+			 * routed and used for its 4-bit levelshifter.
+			 */
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 			vmmc-supply = <&vmmc_regulator>;
 		};
+
+		dmac0: dma-controller@10130000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x10130000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <15>;
+			clocks = <&hclkdma0>;
+			clock-names = "apb_pclk";
+			lli-bus-interface-ahb1;
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
+		dmac1: dma-controller@10150000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x10150000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <13>;
+			clocks = <&hclkdma1>;
+			clock-names = "apb_pclk";
+			lli-bus-interface-ahb1;
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 32a5ccb14..386eee6de 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -47,38 +47,38 @@
 
 		button@1 {
 			debounce_interval = <50>;
-			wakeup = <1>;
+			wakeup-source;
 			linux,code = <2>;
 			label = "userpb";
-			gpios = <&gpio1 0 0x4>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		};
 		button@2 {
 			debounce_interval = <50>;
-			wakeup = <1>;
+			wakeup-source;
 			linux,code = <3>;
 			label = "extkb1";
-			gpios = <&gpio4 23 0x4>;
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
 		};
 		button@3 {
 			debounce_interval = <50>;
-			wakeup = <1>;
+			wakeup-source;
 			linux,code = <4>;
 			label = "extkb2";
-			gpios = <&gpio4 24 0x4>;
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
 		};
 		button@4 {
 			debounce_interval = <50>;
-			wakeup = <1>;
+			wakeup-source;
 			linux,code = <5>;
 			label = "extkb3";
-			gpios = <&gpio5 1 0x4>;
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 		};
 		button@5 {
 			debounce_interval = <50>;
-			wakeup = <1>;
+			wakeup-source;
 			linux,code = <6>;
 			label = "extkb4";
-			gpios = <&gpio5 2 0x4>;
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -88,13 +88,77 @@
 		pinctrl-0 = <&gpioled_snowball_mode>;
 		used-led {
 			label = "user_led";
-			gpios = <&gpio4 14 0x4>;
+			gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
 	soc {
+		/* Name the GPIO muxed rails on the Snowball board */
+		gpio@8012e000 {
+			/* GPIOs 0 - 31 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "",
+				     "AP_GPIO31";
+		};
+
+		gpio@8012e080 {
+			/* GPIOs 32 - 63 */
+			gpio-line-names = "USR PB", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e000 {
+			/* GPIOs 64 - 95 */
+			gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e100 {
+			/* GPIOs 128 - 159 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "", "", "", "", "IRQ_LAN", "RSTn_LAN",
+				     "USR_LED", "", "", "", "", "", "",
+				     "", "", "AP_GPIO151", "AP_GPIO152",
+				     "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e180 {
+			/* GPIOs 160 - 191 */
+			gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
+				     "ACCELEROMETER_INT1_RDY",
+				     "ACCELEROMETER_INT2", "MAG_DRDY",
+				     "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
+				     "GYRO_INT", "UART_WAKE", "GBF_RESET",
+				     "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8011e000 {
+			/* GPIOs 192 - 223 */
+			gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
+				     "", "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "", "",
+				     "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
+				     "MMC_CD", "", "", "", "", "";
+		};
+
+		gpio@8011e080 {
+			/* GPIOs 224 - 255 */
+			gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
 		usb_per5@a03e0000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&musb_default_mode>;
@@ -155,8 +219,8 @@
 		vmmci: regulator-gpio {
 			compatible = "regulator-gpio";
 
-			gpios = <&gpio7 4 0x4>;
-			enable-gpio = <&gpio6 25 0x4>;
+			gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
 
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2900000>;
@@ -175,15 +239,25 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
+			cap-sd-highspeed;
 			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			/* All direction control is used */
+			st,sig-dir-cmd;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi0_default_mode>;
 			pinctrl-1 = <&sdi0_sleep_mode>;
 
-			cd-gpios  = <&gpio6 26 0x4>; // 218
-			cd-inverted;
+			/* GPIO218 MMC_CD */
+			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
@@ -281,7 +355,8 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&magneto_snowball_mode>;
-				gpios = <&gpio5 5 0x4>; /* DRDY line */
+				interrupt-parent = <&gpio5>;
+				interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
 			};
 			l3g4200d@68 {
 				/* Gyroscope */
@@ -292,9 +367,9 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&gyro_snowball_mode>;
-				gpios = <&gpio5 6 0x4>; /* DRDY line */
 				interrupt-parent = <&gpio5>;
-				interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
+				interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+					     <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
 			};
 			lsp001wm@5c {
 				/* Barometer/pressure sensor */
@@ -352,7 +427,25 @@
 
 			ab8500 {
 				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
+					/*
+					 * AB8500 GPIOs are numbered starting from 1, so the first
+					 * index 0 is what in the datasheet is called "GPIO1", and
+					 * the second is "GPIO2" and so forth. Confusingly, the
+					 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
+					 * while later naming "GPIO4" as "PM_GPIO4".
+					 */
+					gpio-line-names = "", /* AB8500 GPIO1 */
+						     "PM_GPIO1", /* AB8500 GPIO2 */
+						     "WLAN_CLK_REQ", /* AB8500 GPIO3 */
+						     "PM_GPIO4", /* AB8500 GPIO4 */
+						     "", "", "", "", "", "", "", "", "", "", "",
+						     "EN_3V6", /* AB8500 GPIO16 */
+						     "", "", "", "" ,"", "", "", "", "",
+						     "EN_3V3", /* AB8500 GPIO26 */
+						     "", "", "", "", "", "", "", "", "", "", "", "", "",
+						     "PM_GPIO40", /* AB8500 GPIO40 */
+						     "PM_GPIO41", /* AB8500 GPIO41 */
+						     "PM_GPIO42"; /* AB8500 GPIO42 */
 				};
 
 				ext_regulators: ab8500-ext-regulators {
@@ -467,7 +560,7 @@
 					/* VMMCI level-shifter enable */
 					snowball_cfg3 {
 						pins = "GPIO217_AH12";
-						ste,config = <&gpio_out_lo>;
+						ste,config = <&gpio_out_hi>;
 					};
 					/* VMMCI level-shifter voltage select */
 					snowball_cfg4 {
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 82a661677..2f5107ffe 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -315,21 +315,17 @@
 			ab3100-regulators {
 				compatible = "stericsson,ab3100-regulators";
 				ab3100_ldo_a_reg: ab3100_ldo_a {
-					regulator-compatible = "ab3100_ldo_a";
 					startup-delay-us = <200>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 				ab3100_ldo_c_reg: ab3100_ldo_c {
-					regulator-compatible = "ab3100_ldo_c";
 					startup-delay-us = <200>;
 				};
 				ab3100_ldo_d_reg: ab3100_ldo_d {
-					regulator-compatible = "ab3100_ldo_d";
 					startup-delay-us = <200>;
 				};
 				ab3100_ldo_e_reg: ab3100_ldo_e {
-					regulator-compatible = "ab3100_ldo_e";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					startup-delay-us = <200>;
@@ -337,7 +333,6 @@
 					regulator-boot-on;
 				};
 				ab3100_ldo_f_reg: ab3100_ldo_f {
-					regulator-compatible = "ab3100_ldo_f";
 					regulator-min-microvolt = <2500000>;
 					regulator-max-microvolt = <2500000>;
 					startup-delay-us = <600>;
@@ -345,28 +340,23 @@
 					regulator-boot-on;
 				};
 				ab3100_ldo_g_reg: ab3100_ldo_g {
-					regulator-compatible = "ab3100_ldo_g";
 					regulator-min-microvolt = <1500000>;
 					regulator-max-microvolt = <2850000>;
 					startup-delay-us = <400>;
 				};
 				ab3100_ldo_h_reg: ab3100_ldo_h {
-					regulator-compatible = "ab3100_ldo_h";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <2750000>;
 					startup-delay-us = <200>;
 				};
 				ab3100_ldo_k_reg: ab3100_ldo_k {
-					regulator-compatible = "ab3100_ldo_k";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <2750000>;
 					startup-delay-us = <200>;
 				};
 				ab3100_ext_reg: ab3100_ext {
-					regulator-compatible = "ab3100_ext";
 				};
 				ab3100_buck_reg: ab3100_buck {
-					regulator-compatible = "ab3100_buck";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1800000>;
 					startup-delay-us = <1000>;
@@ -394,7 +384,7 @@
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
index 6d93475be..c8ad905d0 100644
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -25,6 +25,7 @@
 
 	aliases {
 		ttyAS0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
 	};
 
 };
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index e65744fc1..ad45f5e8f 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -134,7 +134,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
@@ -143,7 +143,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 838b812cb..8b063ab10 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -9,12 +9,45 @@
 #include "stih407-pinctrl.dtsi"
 #include <dt-bindings/mfd/st-lpc.h>
 #include <dt-bindings/phy/phy.h>
-#include <dt-bindings/reset-controller/stih407-resets.h>
+#include <dt-bindings/reset/stih407-resets.h>
 #include <dt-bindings/interrupt-controller/irq-st.h>
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gp0_reserved: rproc@40000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x40000000 0x01000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		gp1_reserved: rproc@41000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x41000000 0x01000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		audio_reserved: rproc@42000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x42000000 0x01000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		dmu_reserved: rproc@43000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x43000000 0x01000000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -22,11 +55,35 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+
+					 /* kHz     uV   */
+			operating-points = <1500000 0
+					    1200000 0
+					    800000  0
+					    500000  0>;
+
+			clocks = <&clk_m_a9>;
+			clock-names = "cpu";
+			clock-latency = <100000>;
+			cpu0-supply = <&pwm_regulator>;
+			st,syscfg = <&syscfg_core 0x8e0>;
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+
+					 /* kHz     uV   */
+			operating-points = <1500000 0
+					    1200000 0
+					    800000  0
+					    500000  0>;
 		};
 	};
 
@@ -65,6 +122,17 @@
 		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	pwm_regulator: pwm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 3 8448>;
+		regulator-name = "CPU_1V0_AVS";
+		regulator-min-microvolt = <784000>;
+		regulator-max-microvolt = <1299000>;
+		regulator-always-on;
+		max-duty-cycle = <255>;
+		status = "okay";
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -137,6 +205,19 @@
 					<ST_IRQ_SYSCFG_DISABLED>;
 		};
 
+		/* Display */
+		vtg_main: sti-vtg-main@8d02800 {
+			compatible = "st,vtg";
+			reg = <0x8d02800 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+		};
+
+		vtg_aux: sti-vtg-aux@8d00200 {
+			compatible = "st,vtg";
+			reg = <0x8d00200 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+		};
+
 		serial@9830000 {
 			compatible = "st,asc";
 			reg = <0x9830000 0x2c>;
@@ -381,6 +462,8 @@
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1_default>;
 
 			status = "disabled";
 		};
@@ -391,6 +474,8 @@
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi2_default>;
 
 			status = "disabled";
 		};
@@ -401,6 +486,8 @@
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi3_default>;
 
 			status = "disabled";
 		};
@@ -411,6 +498,8 @@
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi4_default>;
 
 			status = "disabled";
 		};
@@ -422,6 +511,8 @@
 			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_sysin>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi10_default>;
 
 			status = "disabled";
 		};
@@ -432,6 +523,8 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_sysin>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi11_default>;
 
 			status = "disabled";
 		};
@@ -442,6 +535,8 @@
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_sysin>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi12_default>;
 
 			status = "disabled";
 		};
@@ -455,8 +550,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mmc0>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
 			non-removable;
 		};
@@ -470,8 +566,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			resets = <&softreset STIH407_MMC1_SOFTRESET>;
 			bus-width = <4>;
 		};
@@ -492,7 +589,7 @@
 			reg = <0x8788000 0x1000>;
 			interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
-			st,lpc-mode = <ST_LPC_MODE_RTC>;
+			st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
 		};
 
 		sata0: sata@9b20000 {
@@ -539,6 +636,7 @@
 			status = "disabled";
 		};
 
+
 		st_dwc3: dwc3@8f94000 {
 			compatible	= "st,stih407-dwc3";
 			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
@@ -565,5 +663,165 @@
 						  <&phy_port2 PHY_TYPE_USB3>;
 			};
 		};
+
+		/* COMMS PWM Module */
+		pwm0: pwm@9810000 {
+			compatible	= "st,sti-pwm";
+			#pwm-cells	= <2>;
+			reg		= <0x9810000 0x68>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <1>;
+
+			status		= "disabled";
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@9510000 {
+			compatible	= "st,sti-pwm";
+			#pwm-cells	= <2>;
+			reg		= <0x9510000 0x68>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm1_chan0_default
+					&pinctrl_pwm1_chan1_default
+					&pinctrl_pwm1_chan2_default
+					&pinctrl_pwm1_chan3_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <4>;
+
+			status		= "disabled";
+		};
+
+		rng10: rng@08a89000 {
+			compatible      = "st,rng";
+			reg		= <0x08a89000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		rng11: rng@08a8a000 {
+			compatible      = "st,rng";
+			reg		= <0x08a8a000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			device_type = "network";
+			status = "disabled";
+			compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+			reg = <0x9630000 0x8000>, <0x80 0x4>;
+			reg-names = "stmmaceth", "sti-ethconf";
+
+			st,syscon = <&syscfg_sbc_reg 0x80>;
+			st,gmac_en;
+			resets = <&softreset STIH407_ETH1_SOFTRESET>;
+			reset-names = "stmmaceth";
+
+			interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
+				     <GIC_SPI 99 IRQ_TYPE_NONE>;
+			interrupt-names = "macirq", "eth_wake_irq";
+
+			/* DMA Bus Mode */
+			snps,pbl = <8>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_rgmii1>;
+
+			clock-names = "stmmaceth", "sti-ethclk";
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
+		};
+
+		rng10: rng@08a89000 {
+			compatible      = "st,rng";
+			reg		= <0x08a89000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		rng11: rng@08a8a000 {
+			compatible      = "st,rng";
+			reg		= <0x08a8a000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		mailbox0: mailbox@8f00000  {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f00000 0x1000>;
+			interrupts	= <GIC_SPI 1 IRQ_TYPE_NONE>;
+			#mbox-cells	= <2>;
+			mbox-name	= "a9";
+			status		= "okay";
+		};
+
+		mailbox1: mailbox@8f01000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f01000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_gp_1";
+			status		= "okay";
+		};
+
+		mailbox2: mailbox@8f02000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f02000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_gp_0";
+			status		= "okay";
+		};
+
+		mailbox3: mailbox@8f03000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f03000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_audio_video";
+			status		= "okay";
+		};
+
+		st231_gp0: remote-processor {
+			compatible	= "st,st231-rproc";
+			memory-region	= <&gp0_reserved>;
+			resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
+			reset-names	= "sw_reset";
+			clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+			clock-frequency	= <600000000>;
+			st,syscfg	= <&syscfg_core 0x22c>;
+		};
+
+
+		st231_gp1: remote-processor {
+			compatible	= "st,st231-rproc";
+			memory-region	= <&gp1_reserved>;
+			resets		= <&softreset STIH407_ST231_GP1_SOFTRESET>;
+			reset-names	= "sw_reset";
+			clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_1>;
+			clock-frequency = <600000000>;
+			st,syscfg	= <&syscfg_core 0x220>;
+		};
+
+		st231_audio: remote-processor {
+			compatible	= "st,st231-rproc";
+			memory-region	= <&audio_reserved>;
+			resets		= <&softreset STIH407_ST231_AUD_SOFTRESET>;
+			reset-names	= "sw_reset";
+			clocks		= <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
+			clock-frequency	= <600000000>;
+			st,syscfg	= <&syscfg_core 0x228>;
+		};
+
+		st231_dmu: remote-processor {
+			compatible	= "st,st231-rproc";
+			memory-region	= <&dmu_reserved>;
+			resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
+			reset-names	= "sw_reset";
+			clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
+			clock-frequency	= <600000000>;
+			st,syscfg	= <&syscfg_core 0x224>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 0a754f275..a538ae52d 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -53,7 +53,7 @@
 			reg = <0x0961f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09610000 0x6000>;
 
 			pio0: gpio@09610000 {
@@ -107,12 +107,38 @@
 				st,retime-pin-mask = <0x3f>;
 			};
 
+			cec0 {
+				pinctrl_cec0_default: cec0-default {
+					st,pins {
+						hdmi_cec = <&pio2 4 ALT1 BIDIR>;
+					};
+				};
+			};
+
 			rc {
 				pinctrl_ir: ir0 {
 					st,pins {
 						ir = <&pio4 0 ALT2 IN>;
 					};
 				};
+
+				pinctrl_uhf: uhf0 {
+					st,pins {
+						ir = <&pio4 1 ALT2 IN>;
+					};
+				};
+
+				pinctrl_tx: tx0 {
+					st,pins {
+						tx = <&pio4 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_tx_od: tx_od0 {
+					st,pins {
+						tx_od = <&pio4 3 ALT2 OUT>;
+					};
+				};
 			};
 
 			/* SBC_ASC0 - UART10 */
@@ -190,9 +216,9 @@
 						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
 						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
 						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
-						rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
 						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
-						phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
 					};
 				};
 
@@ -230,6 +256,33 @@
 						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
 					};
 				};
+
+				pinctrl_rmii1: rmii1-0 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk: rmii1_phyclk {
+					st,pins {
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
+					st,pins {
+						phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
+					};
+				};
 			};
 
 			pwm1 {
@@ -254,6 +307,57 @@
 					};
 				};
 			};
+
+			spi10 {
+				pinctrl_spi10_default: spi10-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 OUT>;
+						mrst = <&pio4 7 ALT1 IN>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 BIDIR_PU>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi11 {
+				pinctrl_spi11_default: spi11-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 OUT>;
+						mrst = <&pio3 0 ALT2 IN>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 BIDIR_PU>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi12 {
+				pinctrl_spi12_default: spi12-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 OUT>;
+						mrst = <&pio3 4 ALT2 IN>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 BIDIR_PU>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+			};
 		};
 
 		pin-controller-front0 {
@@ -264,7 +368,7 @@
 			reg = <0x0920f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09200000 0x10000>;
 
 			pio10: pio@09200000 {
@@ -422,20 +526,380 @@
 			};
 
 			i2c3 {
-				pinctrl_i2c3_default: i2c3-default {
+				pinctrl_i2c3_default: i2c3-alt1-0 {
 					st,pins {
 						sda = <&pio18 6 ALT1 BIDIR>;
 						scl = <&pio18 5 ALT1 BIDIR>;
 					};
 				};
+				pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+					st,pins {
+						sda = <&pio17 7 ALT1 BIDIR>;
+						scl = <&pio17 6 ALT1 BIDIR>;
+					};
+				};
+				pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+					st,pins {
+						sda = <&pio13 6 ALT3 BIDIR>;
+						scl = <&pio13 5 ALT3 BIDIR>;
+					};
+				};
 			};
 
 			spi0 {
-				pinctrl_spi0_default: spi0-default {
+				pinctrl_spi0_default: spi0-4w-alt2-0 {
 					st,pins {
-						mtsr = <&pio12 6 ALT2 BIDIR>;
-						mrst = <&pio12 7 ALT2 BIDIR>;
-						scl = <&pio12 5 ALT2 BIDIR>;
+						mtsr = <&pio10 6 ALT2 OUT>;
+						mrst = <&pio10 7 ALT2 IN>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio10 6 ALT2 BIDIR_PU>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 OUT>;
+						mrst = <&pio19 5 ALT1 IN>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 BIDIR_PU>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi1 {
+				pinctrl_spi1_default: spi1-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 OUT>;
+						mrst = <&pio11 2 ALT2 IN>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 BIDIR_PU>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 3 ALT1 OUT>;
+						mrst = <&pio14 4 ALT1 IN>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 3 ALT1 BIDIR_PU>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi2 {
+				pinctrl_spi2_default: spi2-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 OUT>;
+						mrst = <&pio12 7 ALT2 IN>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 BIDIR_PU>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 OUT>;
+						mrst = <&pio14 7 ALT1 IN>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 BIDIR_PU>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 OUT>;
+						mrst = <&pio15 7 ALT2 IN>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 BIDIR_PU>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi3 {
+				pinctrl_spi3_default: spi3-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 OUT>;
+						mrst = <&pio13 7 ALT3 IN>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 BIDIR_PU>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 OUT>;
+						mrst = <&pio17 5 ALT1 IN>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 BIDIR_PU>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 OUT>;
+						mrst = <&pio18 7 ALT1 IN>;
+						scl = <&pio18 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 BIDIR_PU>;
+						scl = <&pio18 5 ALT1 OUT>;
+					};
+				};
+			};
+
+			tsin0 {
+				pinctrl_tsin0_parallel: tsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin0_serial: tsin0_serial {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin1 {
+				pinctrl_tsin1_parallel: tsin1_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin1_serial: tsin1_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin2 {
+				pinctrl_tsin2_parallel: tsin2_parallel {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin2_serial: tsin2_serial {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin3 {
+				pinctrl_tsin3_serial: tsin3_serial {
+					st,pins {
+						DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin4 {
+				pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
+					st,pins {
+						DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin5 {
+				pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
+					st,pins {
+						DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout0 {
+				pinctrl_tsout0_parallel: tsout0_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsout0_serial: tsout0_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout1 {
+				pinctrl_tsout1_serial: tsout1_serial {
+					st,pins {
+						DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
+						VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			mtsin0 {
+				pinctrl_mtsin0_parallel: mtsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			systrace {
+				pinctrl_systrace_default: systrace-default {
+					st,pins {
+						trc_data0 = <&pio11 3 ALT5 OUT>;
+						trc_data1 = <&pio11 4 ALT5 OUT>;
+						trc_data2 = <&pio11 5 ALT5 OUT>;
+						trc_data3 = <&pio11 6 ALT5 OUT>;
+						trc_clk   = <&pio11 7 ALT5 OUT>;
 					};
 				};
 			};
@@ -449,9 +913,21 @@
 			reg = <0x0921f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09210000 0x10000>;
 
+			tsin4 {
+				pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
 			pio20: pio@09210000 {
 				gpio-controller;
 				#gpio-cells = <1>;
@@ -470,7 +946,7 @@
 			reg = <0x0922f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09220000 0x6000>;
 
 			pio30: gpio@09220000 {
@@ -558,6 +1034,47 @@
 					};
 				};
 			};
+
+			spi4 {
+				pinctrl_spi4_default: spi4-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 OUT>;
+						mrst = <&pio30 2 ALT1 IN>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 BIDIR_PU>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 OUT>;
+						mrst = <&pio34 2 ALT3 IN>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 BIDIR_PU>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+			};
+
+			serial3 {
+				pinctrl_serial3: serial3-0 {
+					st,pins {
+						tx = <&pio31 3 ALT1 OUT>;
+						rx = <&pio31 4 ALT1 IN>;
+					};
+				};
+			};
 		};
 
 		pin-controller-flash {
@@ -611,6 +1128,57 @@
 						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
 					};
 				};
+				pinctrl_sd0: sd0-0 {
+					st,pins {
+						sd_clk = <&pio40 6 ALT1 BIDIR>;
+						sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
+						sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
+						sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
+						sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
+						sd_led = <&pio42 0 ALT2 OUT>;
+						sd_pwren = <&pio42 2 ALT2 OUT>;
+						sd_vsel = <&pio42 3 ALT2 OUT>;
+						sd_cd = <&pio42 4 ALT2 IN>;
+						sd_wp = <&pio42 5 ALT2 IN>;
+					};
+				};
+			};
+
+			fsm {
+				pinctrl_fsm: fsm {
+					st,pins {
+						spi-fsm-clk = <&pio40 1 ALT1 OUT>;
+						spi-fsm-cs = <&pio40 0 ALT1 OUT>;
+						spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
+						spi-fsm-miso = <&pio40 3 ALT1 IN>;
+						spi-fsm-hol = <&pio40 5 ALT1 OUT>;
+						spi-fsm-wp = <&pio40 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			nand {
+				pinctrl_nand: nand {
+					st,pins {
+						nand_cs1 = <&pio40 6 ALT3 OUT>;
+						nand_cs0 = <&pio40 7 ALT3 OUT>;
+						nand_d0 = <&pio41 0 ALT3 BIDIR>;
+						nand_d1 = <&pio41 1 ALT3 BIDIR>;
+						nand_d2 = <&pio41 2 ALT3 BIDIR>;
+						nand_d3 = <&pio41 3 ALT3 BIDIR>;
+						nand_d4 = <&pio41 4 ALT3 BIDIR>;
+						nand_d5 = <&pio41 5 ALT3 BIDIR>;
+						nand_d6 = <&pio41 6 ALT3 BIDIR>;
+						nand_d7 = <&pio41 7 ALT3 BIDIR>;
+						nand_we = <&pio42 0 ALT3 OUT>;
+						nand_dqs = <&pio42 1 ALT3 OUT>;
+						nand_ale = <&pio42 2 ALT3 OUT>;
+						nand_cle = <&pio42 3 ALT3 OUT>;
+						nand_rnb = <&pio42 4 ALT3 IN>;
+						nand_oe = <&pio42 5 ALT3 OUT>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 2c560fc30..d60f0d8ad 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -10,19 +10,6 @@
 #include "stih407-family.dtsi"
 / {
 	soc {
-		/* Display */
-		vtg_main: sti-vtg-main@8d02800 {
-			compatible = "st,vtg";
-			reg = <0x8d02800 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
-		};
-
-		vtg_aux: sti-vtg-aux@8d00200 {
-			compatible = "st,vtg";
-			reg = <0x8d00200 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
-		};
-
 		sti-display-subsystem {
 			compatible = "st,sti-display-subsystem";
 			#address-cells = <1>;
@@ -103,77 +90,47 @@
 							 <&clk_s_d0_quadfs 0>,
 							 <&clk_s_d2_quadfs 0>,
 							 <&clk_s_d2_quadfs 0>;
-				ranges;
-
-				sti-hdmi@8d04000 {
-					compatible = "st,stih407-hdmi";
-					reg = <0x8d04000 0x1000>;
-					reg-names = "hdmi-reg";
-					interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
-					interrupt-names	= "irq";
-					clock-names = "pix",
-						      "tmds",
-						      "phy",
-						      "audio",
-						      "main_parent",
-						      "aux_parent";
-
-					clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-						 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-						 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-						 <&clk_s_d0_flexgen CLK_PCM_0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 1>;
+			};
 
-					hdmi,hpd-gpio = <&pio5 3>;
-					reset-names = "hdmi";
-					resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
-					ddc = <&hdmiddc>;
+			sti-hdmi@8d04000 {
+				compatible = "st,stih407-hdmi";
+				reg = <0x8d04000 0x1000>;
+				reg-names = "hdmi-reg";
+				interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+				interrupt-names	= "irq";
+				clock-names = "pix",
+					      "tmds",
+					      "phy",
+					      "audio",
+					      "main_parent",
+					      "aux_parent";
 
-				};
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+					 <&clk_s_d0_flexgen CLK_PCM_0>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
 
-				sti-hda@8d02000 {
-					compatible = "st,stih407-hda";
-					reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
-					reg-names = "hda-reg", "video-dacs-ctrl";
-					clock-names = "pix",
-						      "hddac",
-						      "main_parent",
-						      "aux_parent";
-					clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-						 <&clk_s_d2_flexgen CLK_HDDAC>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 1>;
-				};
+				hdmi,hpd-gpio = <&pio5 3>;
+				reset-names = "hdmi";
+				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+				ddc = <&hdmiddc>;
 			};
-		};
-
-		/* COMMS PWM Module */
-		pwm0: pwm@9810000 {
-			compatible	= "st,sti-pwm";
-			status		= "disabled";
-			#pwm-cells	= <2>;
-			reg		= <0x9810000 0x68>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
-		};
 
-		/* SBC PWM Module */
-		pwm1: pwm@9510000 {
-			compatible	= "st,sti-pwm";
-			status		= "disabled";
-			#pwm-cells	= <2>;
-			reg		= <0x9510000 0x68>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm1_chan0_default
-					&pinctrl_pwm1_chan1_default
-					&pinctrl_pwm1_chan2_default
-					&pinctrl_pwm1_chan3_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
-			st,pwm-num-chan = <4>;
+			sti-hda@8d02000 {
+				compatible = "st,stih407-hda";
+				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+				reg-names = "hda-reg", "video-dacs-ctrl";
+				clock-names = "pix",
+					      "hddac",
+					      "main_parent",
+					      "aux_parent";
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+					 <&clk_s_d2_flexgen CLK_HDDAC>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 16f02c5e3..118ac284f 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -25,6 +25,7 @@
 
 	aliases {
 		ttyAS0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
 	};
 
 	soc {
@@ -35,5 +36,29 @@
 			sd-uhs-sdr104;
 			sd-uhs-ddr50;
 		};
+
+		usb2_picophy1: phy2 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 6b5803a30..fd5049682 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -103,6 +103,7 @@
 				clocks = <&clk_sysin>;
 
 				clock-output-names = "clk-s-a0-pll-ofd-0";
+				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -115,6 +116,7 @@
 
 				clock-output-names = "clk-ic-lmi0",
 						     "clk-ic-lmi1";
+				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
@@ -129,6 +131,7 @@
 					     "clk-s-c0-fs0-ch1",
 					     "clk-s-c0-fs0-ch2",
 					     "clk-s-c0-fs0-ch3";
+			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@09103000 {
@@ -137,16 +140,17 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
 				clock-output-names = "clk-s-c0-pll0-odf-0";
+				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
@@ -204,6 +208,11 @@
 						     "clk-clust-hades",
 						     "clk-hwpe-hades",
 						     "clk-fc-hades";
+				clock-critical = <CLK_ICN_CPU>,
+						 <CLK_TX_ICN_DMU>,
+						 <CLK_EXT2F_A9>,
+						 <CLK_ICN_LMI>,
+						 <CLK_ICN_SBC>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 208b5e890..40318869c 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -10,6 +10,10 @@
 #include "stih407-family.dtsi"
 #include "stih410-pinctrl.dtsi"
 / {
+	aliases {
+		bdisp0 = &bdisp0;
+	};
+
 	soc {
 		usb2_picophy1: phy2 {
 			compatible = "st,stih407-usb2-phy";
@@ -18,6 +22,8 @@
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 				 <&picophyreset STIH407_PICOPHY0_RESET>;
 			reset-names = "global", "port";
+
+			status = "disabled";
 		};
 
 		usb2_picophy2: phy3 {
@@ -27,18 +33,23 @@
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 				 <&picophyreset STIH407_PICOPHY1_RESET>;
 			reset-names = "global", "port";
+
+			status = "disabled";
 		};
 
 		ohci0: usb@9a03c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy1>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ehci0: usb@9a03e00 {
@@ -47,24 +58,30 @@
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy1>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ohci1: usb@9a83c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ehci1: usb@9a83e00 {
@@ -73,25 +90,15 @@
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
-		};
-
-		/* Display */
-		vtg_main: sti-vtg-main@8d02800 {
-			compatible = "st,vtg";
-			reg = <0x8d02800 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
-		};
 
-		vtg_aux: sti-vtg-aux@8d00200 {
-			compatible = "st,vtg";
-			reg = <0x8d00200 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+			status = "disabled";
 		};
 
 		sti-display-subsystem {
@@ -174,49 +181,55 @@
 							 <&clk_s_d0_quadfs 0>,
 							 <&clk_s_d2_quadfs 0>,
 							 <&clk_s_d2_quadfs 0>;
-				ranges;
-
-				sti-hdmi@8d04000 {
-					compatible = "st,stih407-hdmi";
-					reg = <0x8d04000 0x1000>;
-					reg-names = "hdmi-reg";
-					interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
-					interrupt-names	= "irq";
-					clock-names = "pix",
-						      "tmds",
-						      "phy",
-						      "audio",
-						      "main_parent",
-						      "aux_parent";
-
-					clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-						 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-						 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-						 <&clk_s_d0_flexgen CLK_PCM_0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 1>;
-
-					hdmi,hpd-gpio = <&pio5 3>;
-					reset-names = "hdmi";
-					resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
-					ddc = <&hdmiddc>;
-
-				};
-
-				sti-hda@8d02000 {
-					compatible = "st,stih407-hda";
-					reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
-					reg-names = "hda-reg", "video-dacs-ctrl";
-					clock-names = "pix",
-						      "hddac",
-						      "main_parent",
-						      "aux_parent";
-					clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-						 <&clk_s_d2_flexgen CLK_HDDAC>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 1>;
-				};
 			};
+
+			sti-hdmi@8d04000 {
+				compatible = "st,stih407-hdmi";
+				reg = <0x8d04000 0x1000>;
+				reg-names = "hdmi-reg";
+				interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+				interrupt-names	= "irq";
+				clock-names = "pix",
+					      "tmds",
+					      "phy",
+					      "audio",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+					 <&clk_s_d0_flexgen CLK_PCM_0>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				hdmi,hpd-gpio = <&pio5 3>;
+				reset-names = "hdmi";
+				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+				ddc = <&hdmiddc>;
+			};
+
+			sti-hda@8d02000 {
+				compatible = "st,stih407-hda";
+				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+				reg-names = "hda-reg", "video-dacs-ctrl";
+				clock-names = "pix",
+					      "hddac",
+					      "main_parent",
+					      "aux_parent";
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+					 <&clk_s_d2_flexgen CLK_HDDAC>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+			};
+		};
+
+		bdisp0:bdisp@9f10000 {
+			compatible = "st,stih407-bdisp";
+			reg = <0x9f10000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+			clock-names = "bdisp";
+			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index 19b019b5f..12427e651 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -10,7 +10,7 @@
 #include "stih415-clock.dtsi"
 #include "stih415-pinctrl.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset-controller/stih415-resets.h>
+#include <dt-bindings/reset/stih415-resets.h>
 / {
 
 	L2: cache-controller {
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 9dca173e6..9e3170ccd 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -12,7 +12,7 @@
 
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset-controller/stih416-resets.h>
+#include <dt-bindings/reset/stih416-resets.h>
 #include <dt-bindings/interrupt-controller/irq-st.h>
 / {
 	L2: cache-controller {
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 82eee39cc..772d2bb07 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -24,6 +24,7 @@
 
 	aliases {
 		ttyAS0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
 	};
 
 	soc {
@@ -101,5 +102,12 @@
 		st_dwc3: dwc3@8f94000 {
 			status = "okay";
 		};
+
+		ethernet0: dwmac@9630000 {
+			st,tx-retime-src = "clkgen";
+			status = "okay";
+			phy-mode = "rgmii";
+			fixed-link = <0 1 1000 0 0>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 0ab23daa2..ae6d9978e 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
@@ -137,7 +137,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
@@ -146,7 +146,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 354d90f52..965f88160 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -17,11 +17,15 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
 		};
 		cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
 		};
 	};
 
@@ -95,5 +99,11 @@
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
 		};
+
+		mmc0: sdhci@09060000 {
+			assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			assigned-clock-parents = <&clk_s_c0_pll1 0>;
+			assigned-clock-rates = <200000000>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index f589fe487..133375bc8 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -6,6 +6,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <dt-bindings/clock/stih407-clks.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/c8sectpfe.h>
 / {
 	soc {
 		sbc_serial0: serial@9530000 {
@@ -27,14 +30,28 @@
 			};
 		};
 
-		i2c@9842000 {
+		pwm0: pwm@9810000 {
 			status = "okay";
 		};
 
-		i2c@9843000 {
+		pwm1: pwm@9510000 {
 			status = "okay";
 		};
 
+		ssc2: i2c@9842000 {
+			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+
+		ssc3: i2c@9843000 {
+			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+
 		i2c@9844000 {
 			status = "okay";
 		};
@@ -79,5 +96,44 @@
 			status = "okay";
 		};
 
+		ethernet0: dwmac@9630000 {
+			st,tx-retime-src = "clkgen";
+			status = "okay";
+			phy-mode = "rgmii";
+			fixed-link = <0 1 1000 0 0>;
+		};
+
+		demux@08a20000 {
+			compatible	= "st,stih407-c8sectpfe";
+			status		= "okay";
+			reg		= <0x08a20000 0x10000>,
+					  <0x08a00000 0x4000>;
+			reg-names	= "c8sectpfe", "c8sectpfe-ram";
+			interrupts	= <GIC_SPI 34 IRQ_TYPE_NONE>,
+					  <GIC_SPI 35 IRQ_TYPE_NONE>;
+			interrupt-names	= "c8sectpfe-error-irq",
+					  "c8sectpfe-idle-irq";
+			pinctrl-0	= <&pinctrl_tsin0_serial>;
+			pinctrl-1	= <&pinctrl_tsin0_parallel>;
+			pinctrl-2	= <&pinctrl_tsin3_serial>;
+			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
+			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
+			pinctrl-names	= "tsin0-serial",
+					  "tsin0-parallel",
+					  "tsin3-serial",
+					  "tsin4-serial",
+					  "tsin5-serial";
+			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
+			clock-names	= "c8sectpfe";
+
+			/* tsin0 is TSA on NIMA */
+			tsin0: port@0 {
+				tsin-num	= <0>;
+				serial-not-parallel;
+				i2c-bus		= <&ssc2>;
+				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
+				dvb-card	= <STV0367_TDA18212_NIMA_1>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
new file mode 100644
index 000000000..6bfc5959d
--- /dev/null
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32429i-EVAL board";
+	compatible = "st,stm32429i-eval", "st,stm32f429";
+
+	chosen {
+		bootargs = "root=/dev/ram rdinit=/linuxrc";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		green {
+			gpios = <&gpiog 6 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		orange {
+			gpios = <&gpiog 7 1>;
+		};
+		red {
+			gpios = <&gpiog 10 1>;
+		};
+		blue {
+			gpios = <&gpiog 12 1>;
+		};
+	};
+
+	usbotg_hs_phy: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 30>;
+		clock-names = "main_clk";
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0	= <&ethernet0_mii>;
+	pinctrl-names	= "default";
+	phy-mode	= "mii-id";
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 6b9aa59d9..01408073d 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -53,8 +53,8 @@
 	compatible = "st,stm32f429i-disco", "st,stm32f429";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc";
-		linux,stdout-path = &usart1;
+		bootargs = "root=/dev/ram rdinit=/linuxrc";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -64,8 +64,25 @@
 	aliases {
 		serial0 = &usart1;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		red {
+			gpios = <&gpiog 14 0>;
+		};
+		green {
+			gpios = <&gpiog 13 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <8000000>;
 };
 
 &usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index aa73b4f41..35df46255 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -46,60 +46,25 @@
  */
 
 #include "armv7-m.dtsi"
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
 
 / {
 	clocks {
-		clk_sysclk: clk-sysclk {
+		clk_hse: clk-hse {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <180000000>;
-		};
-
-		clk_hclk: clk-hclk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <180000000>;
-		};
-
-		clk_pclk1: clk-pclk1 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <45000000>;
-		};
-
-		clk_pclk2: clk-pclk2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <90000000>;
-		};
-
-		clk_pmtr1: clk-pmtr1 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <90000000>;
-		};
-
-		clk_pmtr2: clk-pmtr2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <180000000>;
-		};
-
-		clk_systick: clk-systick {
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_hclk>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
+			clock-frequency = <0>;
 		};
 	};
 
 	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+
 		timer2: timer@40000000 {
 			compatible = "st,stm32-timer";
 			reg = <0x40000000 0x400>;
 			interrupts = <28>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 128>;
 			status = "disabled";
 		};
 
@@ -107,7 +72,7 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40000400 0x400>;
 			interrupts = <29>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 129>;
 			status = "disabled";
 		};
 
@@ -115,7 +80,7 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40000800 0x400>;
 			interrupts = <30>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 130>;
 			status = "disabled";
 		};
 
@@ -123,14 +88,14 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40000c00 0x400>;
 			interrupts = <50>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 131>;
 		};
 
 		timer6: timer@40001000 {
 			compatible = "st,stm32-timer";
 			reg = <0x40001000 0x400>;
 			interrupts = <54>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 132>;
 			status = "disabled";
 		};
 
@@ -138,7 +103,7 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40001400 0x400>;
 			interrupts = <55>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 133>;
 			status = "disabled";
 		};
 
@@ -146,7 +111,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40004400 0x400>;
 			interrupts = <38>;
-			clocks = <&clk_pclk1>;
+			clocks =  <&rcc 0 145>;
 			status = "disabled";
 		};
 
@@ -154,7 +119,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40004800 0x400>;
 			interrupts = <39>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 146>;
 			status = "disabled";
 		};
 
@@ -162,7 +127,7 @@
 			compatible = "st,stm32-uart";
 			reg = <0x40004c00 0x400>;
 			interrupts = <52>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 147>;
 			status = "disabled";
 		};
 
@@ -170,7 +135,7 @@
 			compatible = "st,stm32-uart";
 			reg = <0x40005000 0x400>;
 			interrupts = <53>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 148>;
 			status = "disabled";
 		};
 
@@ -178,7 +143,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40007800 0x400>;
 			interrupts = <82>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 158>;
 			status = "disabled";
 		};
 
@@ -186,7 +151,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40007c00 0x400>;
 			interrupts = <83>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 159>;
 			status = "disabled";
 		};
 
@@ -194,7 +159,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40011000 0x400>;
 			interrupts = <37>;
-			clocks = <&clk_pclk2>;
+			clocks = <&rcc 0 164>;
 			status = "disabled";
 		};
 
@@ -202,13 +167,237 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40011400 0x400>;
 			interrupts = <71>;
-			clocks = <&clk_pclk2>;
+			clocks = <&rcc 0 165>;
+			status = "disabled";
+		};
+
+		syscfg: system-config@40013800 {
+			compatible = "syscon";
+			reg = <0x40013800 0x400>;
+		};
+
+		pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32f429-pinctrl";
+			ranges = <0 0x40020000 0x3000>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 0>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 1>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 2>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 3>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 4>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 5>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 6>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 7>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 8>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 9>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 10>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1@0 {
+				pins1 {
+					pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
+					bias-disable;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg_hs@0 {
+				pins {
+					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+						 <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+						 <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+						 <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+						 <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+						 <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+						 <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+						 <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+						 <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+						 <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+						 <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+						 <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			ethernet0_mii: mii@0 {
+				pins {
+					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+						 <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
+						 <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
+						 <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
+						 <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+						 <STM32F429_PA2_FUNC_ETH_MDIO>,
+						 <STM32F429_PC1_FUNC_ETH_MDC>,
+						 <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+						 <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+						 <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+						 <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
+						 <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
+						 <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+					slew-rate = <2>;
+				};
+			};
+		};
+
+		rcc: rcc@40023810 {
+			#clock-cells = <2>;
+			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+			reg = <0x40023800 0x400>;
+			clocks = <&clk_hse>;
+		};
+
+		dma1: dma-controller@40026000 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026000 0x400>;
+			interrupts = <11>,
+				     <12>,
+				     <13>,
+				     <14>,
+				     <15>,
+				     <16>,
+				     <17>,
+				     <47>;
+			clocks = <&rcc 0 21>;
+			#dma-cells = <4>;
+		};
+
+		dma2: dma-controller@40026400 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026400 0x400>;
+			interrupts = <56>,
+				     <57>,
+				     <58>,
+				     <59>,
+				     <60>,
+				     <68>,
+				     <69>,
+				     <70>;
+			clocks = <&rcc 0 22>;
+			#dma-cells = <4>;
+			st,mem2mem;
+		};
+
+		ethernet0: dwmac@40028000 {
+			compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+			reg = <0x40028000 0x8000>;
+			reg-names = "stmmaceth";
+			interrupts = <61>, <62>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			clock-names = "stmmaceth", "tx-clk", "rx-clk";
+			clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+			st,syscon = <&syscfg 0x4>;
+			snps,pbl = <8>;
+			snps,mixed-burst;
+			dma-ranges;
 			status = "disabled";
 		};
+
+		usbotg_hs: usb@40040000 {
+			compatible = "snps,dwc2";
+			dma-ranges;
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc 0 29>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		rng: rng@50060800 {
+			compatible = "st,stm32-rng";
+			reg = <0x50060800 0x400>;
+			interrupts = <80>;
+			clocks = <&rcc 0 38>;
+		};
 	};
 };
 
 &systick {
-	clocks = <&clk_systick>;
+	clocks = <&rcc 1 0>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
new file mode 100644
index 000000000..e911af836
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2016 - Lee Jones <lee.jones@linaro.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32F469i-DISCO board";
+	compatible = "st,stm32f469i-disco", "st,stm32f469";
+
+	chosen {
+		bootargs = "root=/dev/ram rdinit=/linuxrc";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <8000000>;
+};
+
+&usart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 2630d78d9..39e368ec3 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -72,8 +72,9 @@
 		};
 
 		blue {
-			label = "a1000:blue:usr";
+			label = "a1000:blue:pwr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 	};
 
@@ -84,15 +85,38 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
 };
 
 &ahci {
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -184,6 +208,12 @@
 	status = "okay";
 };
 
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pins_a>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 93d435670..f3cb297fd 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -125,12 +125,21 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	usb2_vbus_pin_a: usb2_vbus_pin@0 {
 		allwinner,pins = "PH12";
 	};
 };
 
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -146,7 +155,13 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index 5878a0b11..023b03efa 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -45,6 +45,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Chuwi V7 CW0825";
@@ -78,6 +79,27 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	ft5306de4: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
 &lradc {
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
@@ -114,6 +136,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb2_vbus {
 	status = "okay";
 };
@@ -124,7 +170,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 9afb4e018..710e2ef51 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -83,6 +83,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -155,6 +159,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_cubieboard: led_pins@0 {
 		allwinner,pins = "PH20", "PH21";
@@ -162,6 +170,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_ahci_5v {
@@ -216,7 +231,15 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
new file mode 100644
index 000000000..893497e39
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -0,0 +1,281 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Dserve DSRV9703C";
+	compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en_pin_dsrv9703c>;
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor>;
+		min-microvolt = <3000000>;
+		max-microvolt = <3000000>;
+	};
+
+	reg_motor: reg_motor {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&motor_pins>;
+		regulator-name = "vcc-motor";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
+};
+
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button@800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	bl_en_pin_dsrv9703c: bl_en_pin@0 {
+		allwinner,pins = "PH7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	motor_pins: motor_pins@0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	touchscreen_pins: touchscreen_pins@0 {
+		allwinner,pins = "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
index 570754d8d..ac64781a0 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
@@ -47,6 +47,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Gemei G9 Tablet";
@@ -64,12 +65,22 @@
 /*
  * TODO:
  *   2x cameras via CSI
- *   bma250 IRQs
  *   AXP battery management
  *   NAND
  *   OTG
  *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
  */
+&codec {
+	/* PH15 controls power to external amplifier (ft2012q) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
 
 &ehci0 {
 	status = "okay";
@@ -85,15 +96,13 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupts = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
+#include "axp209.dtsi"
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
@@ -103,17 +112,13 @@
 	bma250@18 {
 		compatible = "bosch,bma250";
 		reg = <0x18>;
-
-		/*
-		 * TODO: interrupt pins:
-		 * int1 - PH00
-		 * int2 - PI10
-		 */
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
 	};
 };
 
 &lradc {
-	vref-supply = <&reg_vcc3v0>;
+	vref-supply = <&reg_ldo2>;
 
 	status = "okay";
 
@@ -149,6 +154,40 @@
 	status = "okay";
 };
 
+&pio {
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 2b17c5199..6de83a618 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -66,6 +66,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index 43f58fbe1..9103864fe 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -87,6 +87,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb2_vbus {
 	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 	status = "okay";
@@ -102,7 +126,17 @@
 	allwinner,pins = "PH6";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
new file mode 100644
index 000000000..e09053bf5
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -0,0 +1,274 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "iNet-1";
+	compatible = "inet-tek,inet1", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en_pin_inet>;
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0  {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	ft5x: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_wake_pin>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+		touchscreen-size-x = <600>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button@1200 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0  {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	bl_en_pin_inet: bl_en_pin@0 {
+		allwinner,pins = "PH7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	touchscreen_wake_pin: touchscreen_wake_pin@0 {
+		allwinner,pins = "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index 6c927a824..04b0d2d1a 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -47,6 +47,8 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "INet-97F Rev 02";
@@ -61,8 +63,8 @@
 	};
 };
 
-&ehci0 {
-	status = "okay";
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
 };
 
 &ehci1 {
@@ -75,12 +77,71 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
 
-		interrupt-controller;
-		#interrupt-cells = <1>;
+	button@800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button@1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
 	};
 };
 
@@ -94,15 +155,52 @@
 	status = "okay";
 };
 
-&ohci0 {
+&otg_sram {
 	status = "okay";
 };
 
-&ohci1 {
-	status = "okay";
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
 };
 
-&reg_usb1_vbus {
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
 	status = "okay";
 };
 
@@ -116,8 +214,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
-	usb1_vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
new file mode 100644
index 000000000..bba4f9cf9
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -0,0 +1,400 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "iNet-9F Rev 03";
+	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys-polled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_inet9f>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		button@0 {
+			label = "Left Joystick Left";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+		};
+
+		button@1 {
+			label = "Left Joystick Right";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+		};
+
+		button@2 {
+			label = "Left Joystick Up";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+		};
+
+		button@3 {
+			label = "Left Joystick Down";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		};
+
+		button@4 {
+			label = "Right Joystick Left";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+		};
+
+		button@5 {
+			label = "Right Joystick Right";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+		};
+
+		button@6 {
+			label = "Right Joystick Up";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+		};
+
+		button@7 {
+			label = "Right Joystick Down";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+		};
+
+		button@8 {
+			label = "DPad Left";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
+		};
+
+		button@9 {
+			label = "DPad Right";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+		};
+
+		button@10 {
+			label = "DPad Up";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+		};
+
+		button@11 {
+			label = "DPad Down";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+		};
+
+		button@12 {
+			label = "Button X";
+			linux,code = <BTN_X>;
+			gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
+		};
+
+		button@13 {
+			label = "Button Y";
+			linux,code = <BTN_Y>;
+			gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
+		};
+
+		button@14 {
+			label = "Button A";
+			linux,code = <BTN_A>;
+			gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		};
+
+		button@15 {
+			label = "Button B";
+			linux,code = <BTN_B>;
+			gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
+		};
+
+		button@16 {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+		};
+
+		button@17 {
+			label = "Start Button";
+			linux,code = <BTN_START>;
+			gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+		};
+
+		button@18 {
+			label = "Top Left Button";
+			linux,code = <BTN_TL>;
+			gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+		};
+
+		button@19 {
+			label = "Top Right Button";
+			linux,code = <BTN_TR>;
+			gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button@800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button@1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	key_pins_inet9f: key_pins@0 {
+		allwinner,pins = "PA0", "PA1", "PA3", "PA4",
+				 "PA5", "PA6", "PA8", "PA9",
+				 "PA11", "PA12", "PA13",
+				 "PA14", "PA15", "PA16", "PA17",
+				 "PH22", "PH23", "PH24", "PH25", "PH26";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
new file mode 100644
index 000000000..4e798f014
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2015 Josef Gajdusek <atx@atx.name>
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Iteaduino Plus A10";
+	compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
index dc2f2aeaf..e28f080b1 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -80,6 +80,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
 	};
@@ -156,6 +157,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	emac_power_pin_q5: emac_power_pin@0 {
 		allwinner,pins = "PH19";
@@ -172,6 +177,11 @@
 	};
 };
 
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -186,7 +196,13 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 02158bcd6..8e50723db 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -91,6 +91,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -154,6 +158,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_marsboard: led_pins@0 {
 		allwinner,pins = "PB5", "PB6", "PB7", "PB8";
@@ -161,6 +169,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_usb1_vbus {
@@ -184,7 +199,15 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index ebe2a04ef..a7dd86d30 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -114,6 +114,15 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -128,7 +137,13 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index 3c7eebe17..ee46ea854 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -44,6 +44,7 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "MK802";
@@ -58,6 +59,10 @@
 	};
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -80,7 +85,25 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
 		allwinner,pins = "PH12";
 		allwinner,function = "gpio_out";
@@ -89,6 +112,10 @@
 	};
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -105,7 +132,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index b64aa4eb0..b350448c7 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -124,6 +124,18 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
@@ -150,6 +162,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 		allwinner,pins = "PC3";
@@ -164,6 +180,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
 };
 
 &reg_ahci_5v {
@@ -172,6 +202,10 @@
 	status = "okay";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -186,7 +220,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio   = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply   = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 4e3e1b9d8..39034aa8e 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -104,6 +104,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -129,12 +133,8 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupts = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
@@ -164,6 +164,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_pcduino: led_pins@0 {
 		allwinner,pins = "PH15", "PH16";
@@ -178,14 +182,40 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
-&reg_usb1_vbus {
-	status = "okay";
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
 };
 
-&reg_usb2_vbus {
-	status = "okay";
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
 };
 
 &uart0 {
@@ -194,8 +224,16 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
-	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb2_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+	usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
new file mode 100644
index 000000000..de483a1bf
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The LinkSprite pcDuino2 board is almost identical to the older
+ * LinkSprite pcDuino1 board. The only software visible difference
+ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
+ * is controlled by the PD2 pin (pulled-up by default). Also one of
+ * the USB host ports has been replaced with a USB WIFI chip.
+ */
+
+#include "sun4i-a10-pcduino.dts"
+
+/ {
+	model = "LinkSprite pcDuino2";
+	compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
+};
+
+&pio {
+	usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
+		allwinner,pins = "PD2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb2_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
new file mode 100644
index 000000000..918f97294
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -0,0 +1,260 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Point of View Protab2-IPS9";
+	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en_pin_protab>;
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	pixcir_ts@5c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+		enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@400 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button@800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	bl_en_pin_protab: bl_en_pin@0 {
+		allwinner,pins = "PH7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	touchscreen_pins: touchscreen_pins@0 {
+		allwinner,pins = "PA5", "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 61c03d1fe..7e7dfc2b4 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -45,6 +45,7 @@
 
 #include <dt-bindings/thermal/thermal.h>
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -64,8 +65,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>;
+			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&de_be0_clk>,
+				 <&tcon0_ch1_clk>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -73,8 +75,10 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>, <&ahb_gates 46>;
+			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
+				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -82,8 +86,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
-				 <&ahb_gates 46>;
+			clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
+				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -91,8 +96,11 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
-			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-				 <&ahb_gates 44>, <&ahb_gates 46>;
+			clocks = <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&de_be0_clk>, <&de_fe0_clk>,
+				 <&tcon0_ch1_clk>, <&dram_gates 5>,
+				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
 	};
@@ -180,6 +188,15 @@
 			clock-output-names = "osc24M";
 		};
 
+		osc3M: osc3M_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "osc3M";
+		};
+
 		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -195,6 +212,32 @@
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
+		pll3: clk@01c20010 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20010 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll3";
+		};
+
+		pll3x2: pll3x2_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll3>;
+			clock-output-names = "pll3-2x";
+		};
+
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-pll1-clk";
@@ -219,6 +262,23 @@
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
 		};
 
+		pll7: clk@01c20030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20030 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll7";
+		};
+
+		pll7x2: pll7x2_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll7>;
+			clock-output-names = "pll7-2x";
+		};
+
 		/* dummy is 200M */
 		cpu: cpu@01c20054 {
 			#clock-cells = <0>;
@@ -241,6 +301,7 @@
 			compatible = "allwinner,sun4i-a10-axi-gates-clk";
 			reg = <0x01c2005c 0x4>;
 			clocks = <&axi>;
+			clock-indices = <0>;
 			clock-output-names = "axi_dram";
 		};
 
@@ -257,17 +318,36 @@
 			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>, <6>,
+					<7>, <8>, <9>,
+					<10>, <11>, <12>,
+					<13>, <14>, <16>,
+					<17>, <18>, <20>,
+					<21>, <22>, <23>,
+					<24>, <25>, <26>,
+					<32>, <33>, <34>,
+					<35>, <36>, <37>,
+					<40>, <41>, <43>,
+					<44>, <45>,
+					<46>, <47>,
+					<50>, <52>;
 			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
-				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
-				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
-				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
-				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
-				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
+					     "ahb_ohci0", "ahb_ehci1",
+					     "ahb_ohci1", "ahb_ss", "ahb_dma",
+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+					     "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+					     "ahb_nand", "ahb_sdram", "ahb_ace",
+					     "ahb_emac", "ahb_ts", "ahb_spi0",
+					     "ahb_spi1", "ahb_spi2", "ahb_spi3",
+					     "ahb_pata", "ahb_sata", "ahb_gps",
+					     "ahb_ve", "ahb_tvd", "ahb_tve0",
+					     "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
+					     "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+					     "ahb_de_be0", "ahb_de_be1",
+					     "ahb_de_fe0", "ahb_de_fe1",
+					     "ahb_mp", "ahb_mali400";
 		};
 
 		apb0: apb0@01c20054 {
@@ -283,9 +363,14 @@
 			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<5>, <6>,
+					<7>, <10>;
 			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
-				"apb0_ir1", "apb0_keypad";
+					     "apb0_ac97", "apb0_iis",
+					     "apb0_pio", "apb0_ir0",
+					     "apb0_ir1", "apb0_keypad";
 		};
 
 		apb1: clk@01c20058 {
@@ -301,12 +386,22 @@
 			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <4>,
+					<5>, <6>,
+					<7>, <16>,
+					<17>, <18>,
+					<19>, <20>,
+					<21>, <22>,
+					<23>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_can", "apb1_scr",
-				"apb1_ps20", "apb1_ps21", "apb1_uart0",
-				"apb1_uart1", "apb1_uart2", "apb1_uart3",
-				"apb1_uart4", "apb1_uart5", "apb1_uart6",
-				"apb1_uart7";
+					     "apb1_i2c2", "apb1_can",
+					     "apb1_scr", "apb1_ps20",
+					     "apb1_ps21", "apb1_uart0",
+					     "apb1_uart1", "apb1_uart2",
+					     "apb1_uart3", "apb1_uart4",
+					     "apb1_uart5", "apb1_uart6",
+					     "apb1_uart7";
 		};
 
 		nand_clk: clk@01c20080 {
@@ -429,6 +524,17 @@
 			clock-output-names = "ir1";
 		};
 
+		spdif_clk: clk@01c200c0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200c0 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "spdif";
+		};
+
 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -446,6 +552,123 @@
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi3";
 		};
+
+		dram_gates: clk@01c20100 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-dram-gates-clk";
+			reg = <0x01c20100 0x4>;
+			clocks = <&pll5 0>;
+			clock-indices = <0>,
+					<1>, <2>,
+					<3>,
+					<4>,
+					<5>, <6>,
+					<15>,
+					<24>, <25>,
+					<26>, <27>,
+					<28>, <29>;
+			clock-output-names = "dram_ve",
+					     "dram_csi0", "dram_csi1",
+					     "dram_ts",
+					     "dram_tvd",
+					     "dram_tve0", "dram_tve1",
+					     "dram_output",
+					     "dram_de_fe1", "dram_de_fe0",
+					     "dram_de_be0", "dram_de_be1",
+					     "dram_de_mp", "dram_ace";
+		};
+
+		de_be0_clk: clk@01c20104 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20104 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be0";
+		};
+
+		de_be1_clk: clk@01c20108 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20108 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be1";
+		};
+
+		de_fe0_clk: clk@01c2010c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c2010c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe0";
+		};
+
+		de_fe1_clk: clk@01c20110 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20110 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe1";
+		};
+
+
+		tcon0_ch0_clk: clk@01c20118 {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c20118 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon0-ch0-sclk";
+
+		};
+
+		tcon1_ch0_clk: clk@01c2011c {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c2011c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon1-ch0-sclk";
+
+		};
+
+		tcon0_ch1_clk: clk@01c2012c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c2012c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon0-ch1-sclk";
+
+		};
+
+		tcon1_ch1_clk: clk@01c20130 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c20130 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon1-ch1-sclk";
+
+		};
+
+		ve_clk: clk@01c2013c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ve-clk";
+			reg = <0x01c2013c 0x4>;
+			clocks = <&pll4>;
+			clock-output-names = "ve";
+		};
+
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
 	};
 
 	soc@01c00000 {
@@ -498,6 +721,19 @@
 			#dma-cells = <2>;
 		};
 
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		spi0: spi@01c05000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c05000 0x1000>;
@@ -611,6 +847,19 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@01c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ahb_gates 0>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
 		usbphy: phy@01c13400 {
 			#phy-cells = <1>;
 			compatible = "allwinner,sun4i-a10-usb-phy";
@@ -643,6 +892,14 @@
 			status = "disabled";
 		};
 
+		crypto: crypto-engine@01c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <86>;
+			clocks = <&ahb_gates 5>, <&ss_clk>;
+			clock-names = "ahb", "mod";
+		};
+
 		spi2: spi@01c17000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c17000 0x1000>;
@@ -713,73 +970,65 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			pwm0_pins_a: pwm0@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "pwm";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			pwm1_pins_a: pwm1@0 {
-				allwinner,pins = "PI3";
-				allwinner,function = "pwm";
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB22", "PB23";
-				allwinner,function = "uart0";
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart0_pins_b: uart0@1 {
-				allwinner,pins = "PF2", "PF4";
-				allwinner,function = "uart0";
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PA10", "PA11";
-				allwinner,function = "uart1";
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
+			ir0_rx_pins_a: ir0@0 {
+				allwinner,pins = "PB4";
+				allwinner,function = "ir0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB18", "PB19";
-				allwinner,function = "i2c1";
+			ir0_tx_pins_a: ir0@1 {
+				allwinner,pins = "PB3";
+				allwinner,function = "ir0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB20", "PB21";
-				allwinner,function = "i2c2";
+			ir1_rx_pins_a: ir1@0 {
+				allwinner,pins = "PB23";
+				allwinner,function = "ir1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
+			ir1_tx_pins_a: ir1@1 {
+				allwinner,pins = "PB22";
+				allwinner,function = "ir1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
@@ -799,34 +1048,41 @@
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
-			ir0_rx_pins_a: ir0@0 {
-				allwinner,pins = "PB4";
-				allwinner,function = "ir0";
+			ps20_pins_a: ps20@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "ps2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir0_tx_pins_a: ir0@1 {
-				allwinner,pins = "PB3";
-				allwinner,function = "ir0";
+			ps21_pins_a: ps21@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "ps2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_rx_pins_a: ir1@0 {
-				allwinner,pins = "PB23";
-				allwinner,function = "ir1";
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_tx_pins_a: ir1@1 {
-				allwinner,pins = "PB22";
-				allwinner,function = "ir1";
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			spdif_tx_pins_a: spdif@0 {
+				allwinner,pins = "PB13";
+				allwinner,function = "spdif";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
 			spi0_pins_a: spi0@0 {
 				allwinner,pins = "PI11", "PI12", "PI13";
 				allwinner,function = "spi0";
@@ -883,16 +1139,23 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ps20_pins_a: ps20@0 {
-				allwinner,pins = "PI20", "PI21";
-				allwinner,function = "ps2";
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ps21_pins_a: ps21@0 {
-				allwinner,pins = "PH12", "PH13";
-				allwinner,function = "ps2";
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PA10", "PA11";
+				allwinner,function = "uart1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
@@ -924,6 +1187,19 @@
 			status = "disabled";
 		};
 
+		spdif: spdif@01c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&apb0_gates 1>, <&spdif_clk>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		ir0: ir@01c21800 {
 			compatible = "allwinner,sun4i-a10-ir";
 			clocks = <&apb0_gates 6>, <&ir0_clk>;
@@ -949,6 +1225,19 @@
 			status = "disabled";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
new file mode 100644
index 000000000..d4ad02182
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Auxtek t003 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t003>;
+
+		red {
+			label = "t003-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_t003: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_t003: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG13";
+};
+
+&usb1_vbus_pin_a {
+	allwinner,pins = "PB10";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index 2b3511ea2..2150e15e1 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -86,6 +86,20 @@
 	status = "okay";
 };
 
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
@@ -110,7 +124,18 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG12";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
 		allwinner,pins = "PG1";
 		allwinner,function = "gpio_in";
@@ -144,11 +169,19 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usb1_vbus_pin_a {
 	allwinner,pins = "PG13";
 };
 
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
index 46ff94078..c84ac0053 100644
--- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
@@ -73,6 +73,20 @@
 	status = "okay";
 };
 
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
@@ -83,10 +97,23 @@
 	status = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
 &ohci0 {
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_mk802: led_pins@0 {
 		allwinner,pins = "PB2";
@@ -122,6 +149,11 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index a7e19e484..aef91476f 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -96,15 +96,22 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
+
+	axp152: pmic@30 {
+		reg = <0x30>;
+		interrupts = <0>;
+	};
 };
 
+#include "axp152.dtsi"
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	at24@50 {
-		compatible = "at,24c16";
+		compatible = "atmel,24c16";
 		pagesize = <16>;
 		reg = <0x50>;
 		read-only;
@@ -189,6 +196,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
 		allwinner,pins = "PG1";
@@ -217,6 +228,18 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG12";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
 };
 
 &reg_usb1_vbus {
@@ -225,6 +248,13 @@
 	status = "okay";
 };
 
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>,
+		    <&spi2_cs0_pins_a>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
@@ -243,8 +273,20 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG11";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
-
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
new file mode 100644
index 000000000..b5de75f4c
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -0,0 +1,232 @@
+/*
+ * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "A10s-Wobo i5";
+	compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_wobo_i5>;
+
+		blue {
+			label = "a10s-wobo-i5:blue:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emac_power_pin_wobo>;
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_b>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_wobo_i5: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	emac_power_pin_wobo: emac_power_pin@0 {
+		allwinner,pins = "PA02";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_ldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi2";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index f11efb722..c41a2ba34 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -65,8 +65,8 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>;
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
+				 <&ahb_gates 43>, <&ahb_gates 44>;
 			status = "disabled";
 		};
 
@@ -74,7 +74,17 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
+
+		framebuffer@2 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>,
+				 <&ahb_gates 36>, <&ahb_gates 44>;
 			status = "disabled";
 		};
 	};
@@ -85,6 +95,17 @@
 			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <5>, <6>,
+					<7>, <8>, <9>,
+					<10>, <13>,
+					<14>, <17>, <18>,
+					<20>, <21>, <22>,
+					<26>, <28>, <32>,
+					<34>, <36>, <40>,
+					<43>, <44>,
+					<46>, <51>,
+					<52>;
 			clock-output-names = "ahb_usbotg", "ahb_ehci",
 					     "ahb_ohci", "ahb_ss", "ahb_dma",
 					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
@@ -103,6 +124,9 @@
 			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <0>, <3>,
+					<5>, <6>,
+					<10>;
 			clock-output-names = "apb0_codec", "apb0_iis",
 					     "apb0_pio", "apb0_ir",
 					     "apb0_keypad";
@@ -113,9 +137,14 @@
 			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <16>,
+					<17>, <18>,
+					<19>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
-				"apb1_uart2", "apb1_uart3";
+					     "apb1_i2c2", "apb1_uart0",
+					     "apb1_uart1", "apb1_uart2",
+					     "apb1_uart3";
 		};
 	};
 
@@ -137,6 +166,14 @@
 			#size-cells = <0>;
 		};
 
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -176,13 +213,6 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	uart3_pins_a: uart3@0 {
-		allwinner,pins = "PG9", "PG10";
-		allwinner,function = "uart3";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
 	emac_pins_a: emac0@0 {
 		allwinner,pins = "PA0", "PA1", "PA2",
 				"PA3", "PA4", "PA5", "PA6",
@@ -194,6 +224,17 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	emac_pins_b: emac0@1 {
+		allwinner,pins = "PD6", "PD7", "PD10",
+				"PD11", "PD12", "PD13", "PD14",
+				"PD15", "PD18", "PD19", "PD20",
+				"PD21", "PD22", "PD23", "PD24",
+				"PD25", "PD26", "PD27";
+		allwinner,function = "emac";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	mmc1_pins_a: mmc1@0 {
 		allwinner,pins = "PG3", "PG4", "PG5",
 				 "PG6", "PG7", "PG8";
@@ -201,6 +242,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	spi2_pins_a: spi2@0 {
+		allwinner,pins = "PB12", "PB13", "PB14";
+		allwinner,function = "spi2";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	spi2_cs0_pins_a: spi2_cs0@0 {
+		allwinner,pins = "PB11";
+		allwinner,function = "spi2";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &sram_a {
diff --git a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts
new file mode 100644
index 000000000..894c4c4f9
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Difrnce DIT4350";
+	compatible = "difrnce,dit4350", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
new file mode 100644
index 000000000..6efbba6d4
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Empire Electronix D709 tablet";
+	compatible = "empire-electronix,d709", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_d709: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 990f9d61a..3724b9880 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -45,6 +45,7 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
@@ -96,6 +97,25 @@
 	status = "okay";
 };
 
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
@@ -110,6 +130,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_h702: mmc0_cd_pin@0 {
 		allwinner,pins = "PG0";
@@ -117,6 +141,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 #include "axp209.dtsi"
@@ -152,13 +190,33 @@
 	regulator-name = "vcc-wifi";
 };
 
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_a>;
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins_b>;
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
new file mode 100644
index 000000000..1b11ec95a
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "INet-98V Rev 02";
+	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index ad84fe427..081329e2b 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -109,6 +109,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
 		allwinner,pins = "PG0";
@@ -124,6 +128,27 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 {
+		allwinner,pins = "PG12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
 		allwinner,pins = "PG11";
 		allwinner,function = "gpio_out";
@@ -132,6 +157,12 @@
 	};
 };
 
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_olinuxinom>;
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
 	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
@@ -144,7 +175,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 42324005e..b3c234c65 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -159,6 +159,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
 		allwinner,pins = "PG0";
@@ -174,6 +178,20 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
 	usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
 		allwinner,pins = "PG11";
 		allwinner,function = "gpio_out";
@@ -182,6 +200,11 @@
 	};
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
 	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
@@ -194,7 +217,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
new file mode 100644
index 000000000..a89f29fa3
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Q8 A13 Tablet";
+	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
+
+	panel: panel {
+		compatible = "urt,umsh-8596md-t", "simple-panel";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			/* TODO: lcd panel uses axp gpio0 as enable pin */
+			backlight = <&backlight>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index 514f159a1..a8b0bcc04 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -42,16 +42,22 @@
 
 /dts-v1/;
 #include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sun5i-reference-design-tablet.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Utoo P66";
 	compatible = "utoo,p66", "allwinner,sun5i-a13";
 
+	/* The P66 uses the uart pins as gpios */
+	aliases {
+		/delete-property/serial0;
+	};
+
+	chosen {
+		/delete-property/stdout-path;
+	};
+
 	i2c_lcd: i2c@0 {
 		/* The lcd panel i2c interface is hooked up via gpios */
 		compatible = "i2c-gpio";
@@ -63,37 +69,26 @@
 	};
 };
 
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
+&backlight {
+	/* Note levels of 10 / 20% result in backlight off */
+	brightness-levels = <0 30 40 50 60 70 80 90 100>;
+	default-brightness-level = <6>;
 };
 
-&ehci0 {
-	status = "okay";
+&codec {
+	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
 };
 
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupts = <0>;
-	};
+&codec_pa_pin {
+	allwinner,pins = "PG3";
 };
 
-#include "axp209.dtsi"
-
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-
 	icn8318: touchscreen@40 {
 		compatible = "chipone,icn8318";
 		reg = <0x40>;
 		interrupt-parent = <&pio>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+		interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts_wake_pin_p66>;
 		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
@@ -102,40 +97,6 @@
 		touchscreen-inverted-x;
 		touchscreen-swapped-x-y;
 	};
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_ldo2>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
-	status = "okay";
 };
 
 &mmc2 {
@@ -154,13 +115,6 @@
 };
 
 &pio {
-	mmc0_cd_pin_p66: mmc0_cd_pin@0 {
-		allwinner,pins = "PG0";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
 	i2c_lcd_pins: i2c_lcd_pin@0 {
 		allwinner,pins = "PG10", "PG12";
 		allwinner,function = "gpio_out";
@@ -175,52 +129,17 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	usb0_vbus_pin_a: usb0_vbus_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-int-pll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
-
-&reg_ldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
 };
 
 &reg_usb0_vbus {
 	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	status = "okay";
 };
 
-&usbphy {
-	usb0_vbus-supply = <&reg_usb0_vbus>;
-	usb1_vbus-supply = <&reg_ldo3>;
-	status = "okay";
+&uart1 {
+	/* The P66 uses the uart pins as gpios */
+	status = "disabled";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PB4";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 976d4faa2..a17ba0243 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -61,7 +61,8 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>,
+				 <&tcon_ch0_clk>, <&dram_gates 26>;
 			status = "disabled";
 		};
 	};
@@ -83,7 +84,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
@@ -104,14 +105,24 @@
 			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <5>, <6>,
+					<7>, <8>, <9>,
+					<10>, <13>,
+					<14>, <20>,
+					<21>, <22>,
+					<28>, <32>, <34>,
+					<36>, <40>, <44>,
+					<46>, <51>,
+					<52>;
 			clock-output-names = "ahb_usbotg", "ahb_ehci",
 					     "ahb_ohci", "ahb_ss", "ahb_dma",
 					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
 					     "ahb_mmc2", "ahb_nand",
 					     "ahb_sdram", "ahb_spi0",
 					     "ahb_spi1", "ahb_spi2",
-					     "ahb_stimer", "ahb_ve", "ahb_lcd",
-					     "ahb_csi", "ahb_de_be",
+					     "ahb_stimer", "ahb_ve", "ahb_tve",
+					     "ahb_lcd", "ahb_csi", "ahb_de_be",
 					     "ahb_de_fe", "ahb_iep",
 					     "ahb_mali400";
 		};
@@ -121,6 +132,8 @@
 			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <0>, <5>,
+					<6>;
 			clock-output-names = "apb0_codec", "apb0_pio",
 					     "apb0_ir";
 		};
@@ -130,8 +143,189 @@
 			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <17>,
+					<19>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
+					     "apb1_i2c2", "apb1_uart1",
+					     "apb1_uart3";
+		};
+
+		dram_gates: clk@01c20100 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-dram-gates-clk",
+				     "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c20100 0x4>;
+			clocks = <&pll5 0>;
+			clock-indices = <0>,
+					<1>,
+					<25>,
+					<26>,
+					<29>,
+					<31>;
+			clock-output-names = "dram_ve",
+					     "dram_csi",
+					     "dram_de_fe",
+					     "dram_de_be",
+					     "dram_ace",
+					     "dram_iep";
+		};
+
+		de_be_clk: clk@01c20104 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20104 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be";
+		};
+
+		de_fe_clk: clk@01c2010c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c2010c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe";
+		};
+
+		tcon_ch0_clk: clk@01c20118 {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c20118 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch0-sclk";
+		};
+
+		tcon_ch1_clk: clk@01c2012c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c2012c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch1-sclk";
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc@01c00000 {
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&tcon_ch0_clk 1>;
+			reset-names = "lcd";
+			clocks = <&ahb_gates 36>,
+				 <&tcon_ch0_clk>,
+				 <&tcon_ch1_clk>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-pixel-clock";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun5i-a13-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ahb_gates 46>, <&de_fe_clk>,
+				 <&dram_gates 25>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_fe_clk>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			clocks = <&ahb_gates 44>, <&de_be_clk>,
+				 <&dram_gates 26>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_be_clk>;
+			status = "disabled";
+
+			assigned-clocks = <&de_be_clk>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
 		};
 	};
 };
@@ -155,6 +349,16 @@
 &pio {
 	compatible = "allwinner,sun5i-a13-pinctrl";
 
+	lcd_rgb666_pins: lcd_rgb666@0 {
+		allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				 "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				 "PD24", "PD25", "PD26", "PD27";
+		allwinner,function = "lcd0";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	uart1_pins_a: uart1@0 {
 		allwinner,pins = "PE10", "PE11";
 		allwinner,function = "uart1";
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
new file mode 100644
index 000000000..f694482bd
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-r8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P.";
+	compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		 * The interrupt is routed through the "External Fast
+		 * Interrupt Request" pin (ball G13 of the module)
+		 * directly to the main interrupt controller, without
+		 * any other controller interfering.
+		 */
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	xio: gpio@38 {
+		compatible = "nxp,pcf8574a";
+		reg = <0x38>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	chip_vbus_pin: chip_vbus_pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	chip_id_det_pin: chip_id_det_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "cpuvdd";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "corevdd";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "rtcvdd";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+&reg_ldo5 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_usb0_vbus {
+	pinctrl-0 = <&chip_vbus_pin>;
+	vin-supply = <&reg_vcc5v0>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>,
+		    <&uart3_pins_cts_rts_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&chip_id_det_pin>;
+	status = "okay";
+
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+};
diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi
new file mode 100644
index 000000000..8b058f53b
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-r8.dtsi
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i-a13.dtsi"
+
+/ {
+	chosen {
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>, <&de_be_clk>,
+				 <&tcon_ch1_clk>, <&dram_gates 26>;
+			status = "disabled";
+		};
+	};
+
+	soc@01c00000 {
+		tve0: tv-encoder@01c0a000 {
+			compatible = "allwinner,sun4i-a10-tv-encoder";
+			reg = <0x01c0a000 0x1000>;
+			clocks = <&ahb_gates 34>;
+			resets = <&tcon_ch0_clk 0>;
+			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tve0_in_tcon0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_tve0>;
+				};
+			};
+		};
+	};
+};
+
+&tcon0_out {
+	tcon0_out_tve0: endpoint@1 {
+		reg = <1>;
+		remote-endpoint = <&tve0_in_tcon0>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
new file mode 100644
index 000000000..20cc940f5
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PG10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PG12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 54b097830..e374f4fc8 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -44,6 +44,7 @@
 
 #include "skeleton.dtsi"
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -87,6 +88,15 @@
 			clock-output-names = "osc24M";
 		};
 
+		osc3M: osc3M_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "osc3M";
+		};
+
 		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -102,6 +112,32 @@
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
+		pll3: clk@01c20010 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20010 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll3";
+		};
+
+		pll3x2: pll3x2_clk {
+			compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll3>;
+			clock-output-names = "pll3-2x";
+		};
+
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-pll1-clk";
@@ -126,6 +162,23 @@
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
 		};
 
+		pll7: clk@01c20030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20030 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll7";
+		};
+
+		pll7x2: pll7x2_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll7>;
+			clock-output-names = "pll7-2x";
+		};
+
 		/* dummy is 200M */
 		cpu: cpu@01c20054 {
 			#clock-cells = <0>;
@@ -178,6 +231,7 @@
 			compatible = "allwinner,sun4i-a10-axi-gates-clk";
 			reg = <0x01c2005c 0x4>;
 			clocks = <&axi>;
+			clock-indices = <0>;
 			clock-output-names = "axi_dram";
 		};
 
@@ -284,6 +338,14 @@
 			clock-output-names = "usb_ohci0", "usb_phy";
 		};
 
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun5i-a13-mbus-clk";
@@ -416,6 +478,19 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@01c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ahb_gates 0>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
 		usbphy: phy@01c13400 {
 			#phy-cells = <1>;
 			compatible = "allwinner,sun5i-a13-usb-phy";
@@ -475,8 +550,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			i2c0_pins_a: i2c0@0 {
@@ -516,6 +590,27 @@
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
+
+			uart3_pins_a: uart3@0 {
+				allwinner,pins = "PG9", "PG10";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_cts_rts_a: uart3-cts-rts@0 {
+				allwinner,pins = "PG11", "PG12";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			pwm0_pins: pwm0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -537,6 +632,19 @@
 			status = "disabled";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 0cf9926d1..f9cf36888 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -60,12 +60,34 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	i2c_lcd: i2c@0 {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_lcd_pins>;
+		gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
+			<&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
+		i2c-gpio,delay-us = <5>;
+	};
 };
 
 &ehci1 {
 	status = "okay";
 };
 
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -82,6 +104,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
+	};
 };
 
 &mmc0 {
@@ -112,6 +141,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	i2c_lcd_pins: i2c_lcd_pin@0 {
+		allwinner,pins = "PA23", "PA24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_usb2_vbus {
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index d0cfadac0..9a74637f6 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -54,6 +54,8 @@
 	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
 
 	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
 		serial0 = &uart0;
 	};
 
@@ -67,13 +69,17 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
 	status = "okay";
 };
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
 	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
@@ -119,7 +125,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
-	vmmc-supply = <&vcc_3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
 	cd-inverted;
@@ -134,7 +140,7 @@
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
-	vmmc-supply = <&vcc_wifi>;
+	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	non-removable;
@@ -146,6 +152,13 @@
 };
 
 &pio {
+	gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
+		allwinner,pins = "PA21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
 		allwinner,pins = "PA8";
 		allwinner,function = "gpio_in";
@@ -164,70 +177,69 @@
 &p2wi {
 	status = "okay";
 
-	axp221: pmic@68 {
+	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		dcdc1-supply = <&vcc_3v0>;
-		dcdc5-supply = <&vcc_dram>;
-
-		regulators {
-			x-powers,dcdc-freq = <3000>;
-
-			vcc_3v0: dcdc1 {
-				regulator-always-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "vcc-3v0";
-			};
-
-			vdd_cpu: dcdc2 {
-				regulator-always-on;
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1320000>;
-				regulator-name = "vdd-cpu";
-			};
-
-			vdd_gpu: dcdc3 {
-				regulator-always-on;
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1320000>;
-				regulator-name = "vdd-gpu";
-			};
-
-			vdd_sys_dll: dcdc4 {
-				regulator-always-on;
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-name = "vdd-sys-dll";
-			};
-
-			vcc_dram: dcdc5 {
-				regulator-always-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-name = "vcc-dram";
-			};
-
-			vcc_wifi: aldo1 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_wifi";
-			};
-
-			avcc: aldo3 {
-				regulator-always-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "avcc";
-			};
-		};
 	};
 };
 
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
 &reg_usb1_vbus {
 	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 6e0e5687a..29016a13a 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -65,12 +65,17 @@
 		pinctrl-0 = <&led_pins_m9>;
 
 		blue {
-			label = "m9:blue:usr";
+			label = "m9:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -84,6 +89,7 @@
 	pinctrl-0 = <&gmac_pins_mii_a>;
 	phy = <&phy1>;
 	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
@@ -100,13 +106,26 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	cd-inverted;
 	status = "okay";
 };
 
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
 &pio {
 	led_pins_m9: led_pins@0 {
 		allwinner,pins = "PH13";
@@ -130,6 +149,78 @@
 	};
 };
 
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
 &reg_usb1_vbus {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_vbus_pin_m9>;
@@ -145,5 +236,6 @@
 
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
index 4404f37d1..5faeae429 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -65,12 +65,17 @@
 		pinctrl-0 = <&led_pins_m9>;
 
 		blue {
-			label = "m9:blue:usr";
+			label = "a1000g:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -84,6 +89,7 @@
 	pinctrl-0 = <&gmac_pins_mii_a>;
 	phy = <&phy1>;
 	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
@@ -100,13 +106,26 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	cd-inverted;
 	status = "okay";
 };
 
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
 &pio {
 	led_pins_m9: led_pins@0 {
 		allwinner,pins = "PH13";
@@ -130,6 +149,78 @@
 	};
 };
 
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
 &reg_usb1_vbus {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_vbus_pin_m9>;
@@ -143,7 +234,13 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 008047a01..1867af24f 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -61,7 +61,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		framebuffer@0 {
+		simplefb_hdmi: framebuffer@0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -69,7 +69,7 @@
 			status = "disabled";
 		};
 
-		framebuffer@1 {
+		simplefb_lcd: framebuffer@1 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
@@ -252,6 +252,20 @@
 			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb1>;
+			clock-indices = <1>, <5>,
+					<6>, <8>, <9>,
+					<10>, <11>, <12>,
+					<13>, <14>,
+					<17>, <18>, <19>,
+					<20>, <21>, <22>,
+					<23>, <24>, <26>,
+					<27>, <29>,
+					<30>, <31>, <32>,
+					<36>, <37>, <40>,
+					<43>, <44>, <45>,
+					<46>, <47>, <50>,
+					<52>, <55>, <56>,
+					<57>, <58>;
 			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
 					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
 					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
@@ -281,6 +295,9 @@
 			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <4>,
+					<5>, <12>,
+					<13>;
 			clock-output-names = "apb1_codec", "apb1_digital_mic",
 					"apb1_pio", "apb1_daudio0",
 					"apb1_daudio1";
@@ -299,6 +316,10 @@
 			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb2>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <16>,
+					<17>, <18>, <19>,
+					<20>, <21>;
 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
 					     "apb2_i2c2", "apb2_i2c3",
 					     "apb2_uart0", "apb2_uart1",
@@ -346,6 +367,14 @@
 					     "mmc3_sample";
 		};
 
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "ss";
+		};
+
 		spi0_clk: clk@01c200a0 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-mod0-clk";
@@ -384,6 +413,9 @@
 			compatible = "allwinner,sun6i-a31-usb-clk";
 			reg = <0x01c200cc 0x4>;
 			clocks = <&osc24M>;
+			clock-indices = <8>, <9>, <10>,
+					<16>, <17>,
+					<18>;
 			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
 					     "usb_ohci0", "usb_ohci1",
 					     "usb_ohci2";
@@ -512,6 +544,19 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun6i-a31-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ahb1_gates 24>;
+			resets = <&ahb1_rst 24>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
 		usbphy: phy@01c19400 {
 			compatible = "allwinner,sun6i-a31-usb-phy";
 			reg = <0x01c19400 0x10>,
@@ -599,8 +644,7 @@
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			uart0_pins_a: uart0@0 {
@@ -647,6 +691,34 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc2_pins_a: mmc2@0 {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2@1 {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc3_8bit_emmc_pins: mmc3@1 {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				allwinner,function = "mmc3";
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			gmac_pins_mii_a: gmac_mii@0 {
 				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
 						"PA8", "PA9", "PA11",
@@ -724,6 +796,13 @@
 			reg = <0x01c20ca0 0x20>;
 		};
 
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		rtp: rtp@01c25000 {
 			compatible = "allwinner,sun6i-a31-ts";
 			reg = <0x01c25000 0x100>;
@@ -870,6 +949,16 @@
 			#size-cells = <0>;
 		};
 
+		crypto: crypto-engine@01c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clock-names = "ahb", "mod";
+			resets = <&ahb1_rst 5>;
+			reset-names = "ahb";
+		};
+
 		timer@01c60000 {
 			compatible = "allwinner,sun6i-a31-hstimer",
 				     "allwinner,sun7i-a20-hstimer";
@@ -1031,7 +1120,7 @@
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
new file mode 100644
index 000000000..e182eec6d
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -0,0 +1,208 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Colorfly E708 Q1 tablet";
+	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* rtl8188etv wifi is connected here */
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mma8452_int_e708_q1: mma8452_int_pin@0 {
+		allwinner,pins = "PA9";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pg";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+	vcc-pg-supply = <&reg_dldo2>;
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp221 pmic on the board.
+ *
+ * Once we have axp221 power-supply and vbus-usb support we should switch
+ * to fully supporting otg.
+ */
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
index 1e2411a2b..5e8f8c4f2 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -93,6 +93,11 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
new file mode 100644
index 000000000..73c133f5e
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -0,0 +1,254 @@
+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ * Copyright 2015 Karsten Merker <merker@debian.org>
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "MSI Primo81 tablet";
+	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* rtl8188etv wifi is connected here */
+	status = "okay";
+};
+
+&i2c0 {
+	/* pull-ups and device VDDIO use AXP221 DLDO3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "failed";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	ctp@5d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&gt911_int_primo81>;
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	accelerometer@1c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mma8452_int_primo81>;
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
+		#io-channel-cells = <1>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	gt911_int_primo81: gt911_int_pin@0 {
+		allwinner,pins = "PA3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mma8452_int_primo81: mma8452_int_pin@0 {
+		allwinner,pins = "PA9";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-mipi-bridge";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+	vdd-mipi-bridge-supply = <&reg_eldo3>;
+};
+
+&usb_otg {
+	/* otg support requires support for AXP221 usb-power-supply and GPIO */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
new file mode 100644
index 000000000..4ec0c8679
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
@@ -0,0 +1,142 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Sinlinx SinA31s Core Board";
+	compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+/* eMMC on core board */
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+/* AXP221s PMIC on core board */
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* UART0 pads available on core board */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
new file mode 100644
index 000000000..6ead2f5c8
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The SinA31s development board has the SinA31s core board soldered on */
+#include "sun6i-a31s-sina31s-core.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA31s Development Board";
+	compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_sina31s>;
+
+		status {
+			label = "sina31s:status:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+		};
+	};
+};
+
+&ehci0 {
+	/* USB 2.0 4 port hub IC */
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pin_sina31s: led_pin@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
+		allwinner,pins = "PA4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
new file mode 100644
index 000000000..db7fa13f5
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinovoip BPI-M2";
+	compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bpi_m2>;
+
+		blue {
+			label = "bpi-m2:blue:usr";
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		green {
+			label = "bpi-m2:green:usr";
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+		};
+
+		red {
+			label = "bpi-m2:red:usr";
+			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+		};
+	};
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v0>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
+		allwinner,pins = "PA21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_bpi_m2: led_pins@0 {
+		allwinner,pins = "PG5", "PG10", "PG11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
+		allwinner,pins = "PA4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_pio {
+	mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
+		allwinner,pins = "PL8";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
new file mode 100644
index 000000000..d6ad6196a
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Yones TopTech BS1078 v2 Tablet";
+	compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd-usb2";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+/* Voltage source for I2C pullup resistors for I2C Bus 0 */
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	usb2_vbus-supply = <&reg_dc1sw>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
new file mode 100644
index 000000000..ba5bca0fe
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
+ *
+ * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Banana Pi BPI-M1-Plus";
+	compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bpi_m1p>;
+
+		green {
+			label = "bananapi-m1-plus:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "bananapi-m1-plus:pwr:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>;
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_bpi_m1p>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	enable-sdio-wakeup;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc3_pins_a {
+	/* AP6210 requires pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_bpi_m1p: led_pins@0 {
+		allwinner,pins = "PH24", "PH25";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 9f7b472e6..67c8a7644 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -92,6 +92,24 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+	operating-points = <
+		/* kHz	  uV */
+		960000	1400000
+		912000	1400000
+		864000	1350000
+		720000	1250000
+		528000	1150000
+		312000	1100000
+		144000	1050000
+		>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -119,13 +137,9 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
@@ -159,7 +173,18 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
 		allwinner,pins = "PH10";
 		allwinner,function = "gpio_in";
@@ -182,6 +207,37 @@
 	};
 };
 
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -216,7 +272,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 39a51d514..1fa832d7b 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -84,6 +84,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -150,6 +154,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_cubieboard2: led_pins@0 {
 		allwinner,pins = "PH20", "PH21";
@@ -157,12 +165,24 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_ahci_5v {
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 #include "axp209.dtsi"
 
 &reg_dcdc2 {
@@ -205,6 +225,9 @@
 };
 
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 4611e2f5a..83f39b036 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -88,15 +88,29 @@
 		};
 	};
 
-	reg_vmmc3: vmmc3 {
-		compatible = "regulator-fixed";
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_cubietruck>;
-		regulator-name = "vmmc3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
 	};
 };
 
@@ -105,6 +119,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -172,7 +190,8 @@
 &mmc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins_a>;
-	vmmc-supply = <&reg_vmmc3>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
@@ -181,7 +200,7 @@
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
 		interrupt-names = "host-wake";
 	};
 };
@@ -199,23 +218,27 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
-	vmmc3_pin_cubietruck: vmmc3_pin@0 {
-		allwinner,pins = "PH9";
+	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+		allwinner,pins = "PH12";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-		allwinner,pins = "PH12";
+	led_pins_cubietruck: led_pins@0 {
+		allwinner,pins = "PH7", "PH11", "PH20", "PH21";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	led_pins_cubietruck: led_pins@0 {
-		allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+	mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
+		allwinner,pins = "PH9";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -227,6 +250,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH19";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &pwm {
@@ -282,13 +319,28 @@
 	status = "okay";
 };
 
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pins_a>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+	usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index f32f6f20d..1e6bd360d 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -178,7 +178,7 @@
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
 		interrupt-names = "host-wake";
 	};
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
new file mode 100644
index 000000000..f5b5325a7
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2015 Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "ICnova-A20 SWAC";
+	compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
new file mode 100644
index 000000000..10d48cbf8
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Itead Ibox A20";
+	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_itead_core>;
+
+		green {
+			label = "itead_core:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		blue {
+			label = "itead_core:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	led_pins_itead_core: led_pins@0 {
+		allwinner,pins = "PH20","PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
new file mode 100644
index 000000000..73c05dab0
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -0,0 +1,341 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Lamobo R1";
+	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_lamobo_r1>;
+
+		green {
+			label = "lamobo_r1:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci_pwr_pin_a {
+	allwinner,pins = "PB3";
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch: ethernet-switch@1e {
+			compatible = "brcm,bcm53125";
+			reg = <30>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					label = "lan2";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					label = "lan4";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					label = "wan";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					label = "lan1";
+				};
+
+				port8: port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&gmac>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_lamobo_r1: led_pins@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_ahci_5v {
+	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>,
+		    <&spi0_cs1_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_b>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usb2_vbus_pin_a {
+	allwinner,pins = "PH12";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
index 4f432f8ad..90ff4a267 100644
--- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
@@ -53,6 +53,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "mk808c";
@@ -68,6 +69,10 @@
 	};
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -121,6 +126,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -141,7 +170,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
new file mode 100644
index 000000000..23aacce4d
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -0,0 +1,307 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ * Copyright 2015 - Karsten Merker <merker@debian.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A20-Olimex-SOM-EVB";
+	compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olimex_som_evb>;
+
+		green {
+			label = "a20-olimex-som-evb:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button@600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button@800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button@1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button@1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_olimex_som_evb: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
+		allwinner,pins = "PH0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 769726dfb..35ad7006c 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -117,6 +117,18 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
@@ -135,6 +147,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 		allwinner,pins = "PC3";
@@ -149,6 +165,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
 };
 
 &reg_ahci_5v {
@@ -157,6 +187,10 @@
 	status = "okay";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -171,7 +205,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
new file mode 100644
index 000000000..5ea4915f6
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -0,0 +1,82 @@
+ /*
+ * Copyright 2015 - Ultimaker B.V.
+ * Author Olliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-lime2.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2-eMMC";
+	compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		pinctrl-0 = <&mmc2_pins_nrst>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pio {
+	mmc2_pins_nrst: mmc2@0 {
+		allwinner,pins = "PC16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 8acff7827..d5c796c8d 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -170,6 +170,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
 };
 
 &mmc0 {
@@ -190,6 +196,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 		allwinner,pins = "PC3";
@@ -204,6 +214,27 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
+		allwinner,pins = "PC17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &reg_ahci_5v {
@@ -212,6 +243,12 @@
 	status = "okay";
 };
 
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_lime2>;
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -226,7 +263,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 00f8f25ec..7e3006f6a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -125,6 +125,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
 };
 
 &i2c2 {
@@ -215,6 +221,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
 		allwinner,pins = "PH11";
@@ -229,12 +239,30 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
 };
 
 &reg_ahci_5v {
 	status = "okay";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -275,7 +303,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index 73cd81ee0..2be04c438 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -95,6 +95,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -156,7 +160,18 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
 		allwinner,pins = "PH10";
 		allwinner,function = "gpio_in";
@@ -225,6 +240,10 @@
 	regulator-name = "avcc";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
@@ -243,7 +262,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index 55a06ceb8..71125bf64 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -141,7 +141,18 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
 		allwinner,pins = "PH10";
 		allwinner,function = "gpio_in";
@@ -203,6 +214,10 @@
 	regulator-name = "avcc";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
@@ -221,7 +236,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index 5361fce26..ddac7328b 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -82,6 +82,14 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -108,13 +116,9 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
@@ -142,6 +146,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
 		allwinner,pins = "PH2";
@@ -157,8 +165,15 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
-		allwinner,pins = "PH11";
+		allwinner,pins = "PD2";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -171,13 +186,37 @@
 	status = "okay";
 };
 
-&reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
-	gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-	status = "okay";
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
 };
 
-&reg_usb2_vbus {
+/* A single regulator (U24) powers both USB host ports. */
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
 	status = "okay";
 };
 
@@ -187,8 +226,16 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb2_vbus>;
+	usb2_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index afc9ecebe..1a8b39be1 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -111,6 +111,14 @@
 	allwinner,pins = "PH2";
 };
 
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -137,16 +145,14 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
+#include "axp209.dtsi"
+
 &ir0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir0_rx_pins_a>;
@@ -171,6 +177,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_pcduino3: led_pins@0 {
 		allwinner,pins = "PH15", "PH16";
@@ -185,6 +195,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_ahci_5v {
@@ -192,6 +209,31 @@
 	status = "okay";
 };
 
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -206,7 +248,15 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index 83c6d3f87..2f6b21add 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -48,6 +48,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Wexler TAB7200";
@@ -57,11 +58,28 @@
 		serial0 = &uart0;
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_enable_pin>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 };
 
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -86,6 +104,8 @@
 	};
 };
 
+#include "axp209.dtsi"
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
@@ -96,6 +116,18 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	gt911: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_reset_pin>;
+		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
+		touchscreen-swapped-x-y;
+	};
 };
 
 &lradc {
@@ -135,7 +167,45 @@
 	status = "okay";
 };
 
-#include "axp209.dtsi"
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	bl_enable_pin: bl_enable_pin@0 {
+		allwinner,pins = "PH7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	ts_reset_pin: ts_reset_pin@0 {
+		allwinner,pins = "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
 
 &reg_dcdc2 {
 	regulator-always-on;
@@ -162,6 +232,10 @@
 	regulator-name = "avcc";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -176,7 +250,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
new file mode 100644
index 000000000..dc31d476e
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Wits Pro A20 DKT";
+	compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
+		allwinner,pins = "PH9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 6a63f30c9..bd0c47660 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -66,8 +67,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>;
+			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&de_be0_clk>,
+				 <&tcon0_ch1_clk>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -75,7 +77,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			clocks = <&ahb_gates 36>, <&ahb_gates 44>,
+				 <&de_be0_clk>, <&tcon0_ch0_clk>,
+				 <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -83,8 +87,10 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-tve0";
-			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-				 <&ahb_gates 44>;
+			clocks = <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>,
+				 <&de_be0_clk>, <&tcon0_ch1_clk>,
+				 <&dram_gates 5>, <&dram_gates 26>;
 			status = "disabled";
 		};
 	};
@@ -107,7 +113,7 @@
 				720000	1200000
 				528000	1100000
 				312000	1000000
-				144000	900000
+				144000	1000000
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
@@ -184,6 +190,15 @@
 			clock-output-names = "osc24M";
 		};
 
+		osc3M: osc3M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "osc3M";
+		};
+
 		osc32k: clk@0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -199,6 +214,32 @@
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
+		pll3: clk@01c20010 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20010 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll3";
+		};
+
+		pll3x2: pll3x2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&pll3>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clock-output-names = "pll3-2x";
+		};
+
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun7i-a20-pll4-clk";
@@ -224,6 +265,23 @@
 					     "pll6_div_4";
 		};
 
+		pll7: clk@01c20030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20030 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll7";
+		};
+
+		pll7x2: pll7x2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&pll7>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clock-output-names = "pll7-2x";
+		};
+
 		pll8: clk@01c20040 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun7i-a20-pll4-clk";
@@ -267,6 +325,19 @@
 			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <4>,
+					<5>, <6>, <7>, <8>,
+					<9>, <10>, <11>, <12>,
+					<13>, <14>, <16>,
+					<17>, <18>, <20>, <21>,
+					<22>, <23>, <25>,
+					<28>, <32>, <33>, <34>,
+					<35>, <36>, <37>, <40>,
+					<41>, <42>, <43>,
+					<44>, <45>, <46>,
+					<47>, <49>, <50>,
+					<52>;
 			clock-output-names = "ahb_usb0", "ahb_ehci0",
 				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
 				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
@@ -295,10 +366,14 @@
 			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <4>,
+					<5>, <6>, <7>,
+					<8>, <10>;
 			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis0", "apb0_iis1",
+				"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
 				"apb0_pio", "apb0_ir0", "apb0_ir1",
-				"apb0_iis2", "apb0_keypad";
+				"apb0_i2s2", "apb0_keypad";
 		};
 
 		apb1: clk@01c20058 {
@@ -314,6 +389,12 @@
 			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <4>,
+					<5>, <6>, <7>,
+					<15>, <16>, <17>,
+					<18>, <19>, <20>,
+					<21>, <22>, <23>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
 				"apb1_i2c2", "apb1_i2c3", "apb1_can",
 				"apb1_scr", "apb1_ps20", "apb1_ps21",
@@ -442,6 +523,47 @@
 			clock-output-names = "ir1";
 		};
 
+		i2s0_clk: clk@01c200b8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200b8 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "i2s0";
+		};
+
+		ac97_clk: clk@01c200bc {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200bc 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "ac97";
+		};
+
+		spdif_clk: clk@01c200c0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200c0 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "spdif";
+		};
+
+		keypad_clk: clk@01c200c4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200c4 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "keypad";
+		};
+
 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -460,6 +582,144 @@
 			clock-output-names = "spi3";
 		};
 
+		i2s1_clk: clk@01c200d8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200d8 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "i2s1";
+		};
+
+		i2s2_clk: clk@01c200dc {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200dc 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "i2s2";
+		};
+
+		dram_gates: clk@01c20100 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-dram-gates-clk";
+			reg = <0x01c20100 0x4>;
+			clocks = <&pll5 0>;
+			clock-indices = <0>,
+					<1>, <2>,
+					<3>,
+					<4>,
+					<5>, <6>,
+					<15>,
+					<24>, <25>,
+					<26>, <27>,
+					<28>, <29>;
+			clock-output-names = "dram_ve",
+					     "dram_csi0", "dram_csi1",
+					     "dram_ts",
+					     "dram_tvd",
+					     "dram_tve0", "dram_tve1",
+					     "dram_output",
+					     "dram_de_fe1", "dram_de_fe0",
+					     "dram_de_be0", "dram_de_be1",
+					     "dram_de_mp", "dram_ace";
+		};
+
+		de_be0_clk: clk@01c20104 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20104 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be0";
+		};
+
+		de_be1_clk: clk@01c20108 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20108 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be1";
+		};
+
+		de_fe0_clk: clk@01c2010c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c2010c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe0";
+		};
+
+		de_fe1_clk: clk@01c20110 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20110 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe1";
+		};
+
+		tcon0_ch0_clk: clk@01c20118 {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c20118 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon0-ch0-sclk";
+
+		};
+
+		tcon1_ch0_clk: clk@01c2011c {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c2011c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon1-ch0-sclk";
+
+		};
+
+		tcon0_ch1_clk: clk@01c2012c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c2012c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon0-ch1-sclk";
+
+		};
+
+		tcon1_ch1_clk: clk@01c20130 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c20130 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon1-ch1-sclk";
+
+		};
+
+		ve_clk: clk@01c2013c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ve-clk";
+			reg = <0x01c2013c 0x4>;
+			clocks = <&pll4>;
+			clock-output-names = "ve";
+		};
+
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun5i-a13-mbus-clk";
@@ -586,6 +846,19 @@
 			#dma-cells = <2>;
 		};
 
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		spi0: spi@01c05000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c05000 0x1000>;
@@ -699,6 +972,19 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@01c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ahb_gates 0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
 		usbphy: phy@01c13400 {
 			#phy-cells = <1>;
 			compatible = "allwinner,sun7i-a20-usb-phy";
@@ -731,6 +1017,14 @@
 			status = "disabled";
 		};
 
+		crypto: crypto-engine@01c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 5>, <&ss_clk>;
+			clock-names = "ahb", "mod";
+		};
+
 		spi2: spi@01c17000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c17000 0x1000>;
@@ -794,164 +1088,180 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			pwm0_pins_a: pwm0@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "pwm";
+			clk_out_a_pins_a: clk_out_a@0 {
+				allwinner,pins = "PI12";
+				allwinner,function = "clk_out_a";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			pwm1_pins_a: pwm1@0 {
-				allwinner,pins = "PI3";
-				allwinner,function = "pwm";
+			clk_out_b_pins_a: clk_out_b@0 {
+				allwinner,pins = "PI13";
+				allwinner,function = "clk_out_b";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB22", "PB23";
-				allwinner,function = "uart0";
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart2_pins_a: uart2@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
-				allwinner,function = "uart2";
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart3_pins_a: uart3@0 {
-				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
-				allwinner,function = "uart3";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA10",
+						"PA11", "PA12", "PA13",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart3_pins_b: uart3@1 {
-				allwinner,pins = "PH0", "PH1";
-				allwinner,function = "uart3";
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart4_pins_a: uart4@0 {
-				allwinner,pins = "PG10", "PG11";
-				allwinner,function = "uart4";
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart4_pins_b: uart4@1 {
-				allwinner,pins = "PH4", "PH5";
-				allwinner,function = "uart4";
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart5_pins_a: uart5@0 {
-				allwinner,pins = "PI10", "PI11";
-				allwinner,function = "uart5";
+			i2c3_pins_a: i2c3@0 {
+				allwinner,pins = "PI0", "PI1";
+				allwinner,function = "i2c3";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart6_pins_a: uart6@0 {
-				allwinner,pins = "PI12", "PI13";
-				allwinner,function = "uart6";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			ir0_rx_pins_a: ir0@0 {
+				    allwinner,pins = "PB4";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart7_pins_a: uart7@0 {
-				allwinner,pins = "PI20", "PI21";
-				allwinner,function = "uart7";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			ir0_tx_pins_a: ir0@1 {
+				    allwinner,pins = "PB3";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			ir1_rx_pins_a: ir1@0 {
+				    allwinner,pins = "PB23";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB18", "PB19";
-				allwinner,function = "i2c1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			ir1_tx_pins_a: ir1@1 {
+				    allwinner,pins = "PB22";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB20", "PB21";
-				allwinner,function = "i2c2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			i2c3_pins_a: i2c3@0 {
-				allwinner,pins = "PI0", "PI1";
-				allwinner,function = "i2c3";
+			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+				allwinner,pins = "PH1";
+				allwinner,function = "gpio_in";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc2_pins_a: mmc2@0 {
+				allwinner,pins = "PC6", "PC7", "PC8",
+						 "PC9", "PC10", "PC11";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc3_pins_a: mmc3@0 {
+				allwinner,pins = "PI4", "PI5", "PI6",
+						 "PI7", "PI8", "PI9";
+				allwinner,function = "mmc3";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
+			ps20_pins_a: ps20@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "ps2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			clk_out_a_pins_a: clk_out_a@0 {
-				allwinner,pins = "PI12";
-				allwinner,function = "clk_out_a";
+			ps21_pins_a: ps21@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "ps2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			clk_out_b_pins_a: clk_out_b@0 {
-				allwinner,pins = "PI13";
-				allwinner,function = "clk_out_b";
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			gmac_pins_mii_a: gmac_mii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "gmac";
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA10",
-						"PA11", "PA12", "PA13",
-						"PA15", "PA16";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in RGMII mode use DDR mode
-				 * and need a higher signal drive strength
-				 */
-				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			spdif_tx_pins_a: spdif@0 {
+				allwinner,pins = "PB13";
+				allwinner,function = "spdif";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			spi0_pins_a: spi0@0 {
@@ -1017,75 +1327,65 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0", "PF1", "PF2",
-						 "PF3", "PF4", "PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-				allwinner,pins = "PH1";
-				allwinner,function = "gpio_in";
+			uart2_pins_a: uart2@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "uart2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			mmc2_pins_a: mmc2@0 {
-				allwinner,pins = "PC6", "PC7", "PC8",
-						 "PC9", "PC10", "PC11";
-				allwinner,function = "mmc2";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			mmc3_pins_a: mmc3@0 {
-				allwinner,pins = "PI4", "PI5", "PI6",
-						 "PI7", "PI8", "PI9";
-				allwinner,function = "mmc3";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+			uart3_pins_a: uart3@0 {
+				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir0_rx_pins_a: ir0@0 {
-				    allwinner,pins = "PB4";
-				    allwinner,function = "ir0";
-				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart3_pins_b: uart3@1 {
+				allwinner,pins = "PH0", "PH1";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir0_tx_pins_a: ir0@1 {
-				    allwinner,pins = "PB3";
-				    allwinner,function = "ir0";
-				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart4_pins_a: uart4@0 {
+				allwinner,pins = "PG10", "PG11";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_rx_pins_a: ir1@0 {
-				    allwinner,pins = "PB23";
-				    allwinner,function = "ir1";
-				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart4_pins_b: uart4@1 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_tx_pins_a: ir1@1 {
-				    allwinner,pins = "PB22";
-				    allwinner,function = "ir1";
-				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart5_pins_a: uart5@0 {
+				allwinner,pins = "PI10", "PI11";
+				allwinner,function = "uart5";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ps20_pins_a: ps20@0 {
-				allwinner,pins = "PI20", "PI21";
-				allwinner,function = "ps2";
+			uart6_pins_a: uart6@0 {
+				allwinner,pins = "PI12", "PI13";
+				allwinner,function = "uart6";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ps21_pins_a: ps21@0 {
-				allwinner,pins = "PH12", "PH13";
-				allwinner,function = "ps2";
+			uart7_pins_a: uart7@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "uart7";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
@@ -1122,6 +1422,19 @@
 			status = "disabled";
 		};
 
+		spdif: spdif@01c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 1>, <&spdif_clk>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		ir0: ir@01c21800 {
 			compatible = "allwinner,sun4i-a10-ir";
 			clocks = <&apb0_gates 6>, <&ir0_clk>;
@@ -1140,6 +1453,32 @@
 			status = "disabled";
 		};
 
+		i2s1: i2s@01c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 4>, <&i2s1_clk>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 4>,
+			       <&dma SUN4I_DMA_NORMAL 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@01c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>, <&i2s0_clk>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		lradc: lradc@01c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
@@ -1147,11 +1486,37 @@
 			status = "disabled";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun7i-a20-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun7i-a20-sid";
 			reg = <0x01c23800 0x200>;
 		};
 
+		i2s2: i2s@01c24400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c24400 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 8>, <&i2s2_clk>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 6>,
+			       <&dma SUN4I_DMA_NORMAL 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		rtp: rtp@01c25000 {
 			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 7abd0ae31..7e05e09e6 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -56,7 +56,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		framebuffer@0 {
+		simplefb_lcd: framebuffer@0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
@@ -175,27 +175,13 @@
 			clock-output-names = "apb1";
 		};
 
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-					"ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_spinlock",
-					"ahb1_drc";
-		};
-
 		apb1_gates: clk@01c20068 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <5>,
+					<12>, <13>;
 			clock-output-names = "apb1_codec", "apb1_pio",
 					"apb1_daudio0",	"apb1_daudio1";
 		};
@@ -213,6 +199,10 @@
 			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb2>;
+			clock-indices = <0>, <1>,
+					<2>, <16>,
+					<17>, <18>,
+					<19>, <20>;
 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
 					"apb2_i2c2", "apb2_uart0",
 					"apb2_uart1", "apb2_uart2",
@@ -332,6 +322,28 @@
 			#size-cells = <0>;
 		};
 
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 26>;
+			resets = <&ahb1_rst 26>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+			resets = <&ahb1_rst 29>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		pio: pinctrl@01c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
@@ -339,8 +351,7 @@
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			uart0_pins_a: uart0@0 {
@@ -370,12 +381,19 @@
 				allwinner,pins = "PC5", "PC6", "PC8",
 						 "PC9", "PC10", "PC11",
 						 "PC12", "PC13", "PC14",
-						 "PC15";
+						 "PC15", "PC16";
 				allwinner,function = "mmc2";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			pwm0_pins: pwm0 {
+				allwinner,pins = "PH0";
+				allwinner,function = "pwm0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PH2", "PH3";
 				allwinner,function = "i2c0";
@@ -430,6 +448,14 @@
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pwm: pwm@01c21400 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		lradc: lradc@01c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
@@ -553,6 +579,14 @@
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		nmi_intc: interrupt-controller@01f00c0c {
+			compatible = "allwinner,sun6i-a31-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c0c 0x38>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		prcm@01f01400 {
 			compatible = "allwinner,sun8i-a23-prcm";
 			reg = <0x01f01400 0x200>;
@@ -621,10 +655,18 @@
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <3>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PL0", "PL1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
 			r_uart_pins_a: r_uart@0 {
 				allwinner,pins = "PL2", "PL3";
 				allwinner,function = "s_uart";
@@ -632,5 +674,19 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
+
+		r_rsb: rsb@01f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
new file mode 100644
index 000000000..b2ce284a6
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
@@ -0,0 +1,257 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Allwinner GT90H Dual Core Tablet (v4)";
+	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en_pin_gt90h>;
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button@600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
+	vmmc-supply = <&reg_aldo1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	bl_en_pin_gt90h: bl_en_pin@0 {
+		allwinner,pins = "PH6";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
new file mode 100644
index 000000000..0f9f71b14
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-86DZ Rev 01";
+	compatible = "primux,inet86dz", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
index 382d64c3b..c2f22fc33 100644..120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
@@ -1,54 +1 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
- * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
- * and it uses different camera sensors.
- */
-
-#include "sun8i-a23-ippo-q8h-v5.dts"
-
-/ {
-	model = "Ippo Q8H Dual Core Tablet (v1.2)";
-	compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23";
-};
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
index 95134c69c..c2f22fc33 100644..120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -1,127 +1 @@
-/*
- * Copyright 2014 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a23.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
-	model = "Ippo Q8H Dual Core Tablet (v5)";
-	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
-
-	aliases {
-		serial0 = &r_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
-	/* pull-ups and devices require PMIC regulator */
-	status = "failed";
-};
-
-&lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
new file mode 100644
index 000000000..e3004428e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2407PXE03 tablet";
+	compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
new file mode 100644
index 000000000..6d06e24d4
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2809PXE04 tablet";
+	compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
new file mode 100644
index 000000000..956320a6c
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A23 Tablet";
+	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 8698f7aa3..92e661697 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -50,6 +50,31 @@
 	};
 
 	clocks {
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-indices = <1>, <6>,
+					<8>, <9>, <10>,
+					<13>, <14>,
+					<19>, <20>,
+					<21>, <24>, <26>,
+					<29>, <32>, <36>,
+					<40>, <44>, <46>,
+					<52>, <53>,
+					<54>, <57>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+					"ahb1_nand", "ahb1_sdram",
+					"ahb1_hstimer", "ahb1_spi0",
+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
+					"ahb1_gpu", "ahb1_msgbox",
+					"ahb1_spinlock", "ahb1_drc";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun8i-a23-mbus-clk";
@@ -58,6 +83,39 @@
 			clock-output-names = "mbus";
 		};
 	};
+
+	soc@01c00000 {
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun6i-a31-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ahb1_gates 24>;
+			resets = <&ahb1_rst 24>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun8i-a23-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1";
+			clocks = <&usb_clk 8>,
+				 <&usb_clk 9>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&usb_clk 0>,
+				 <&usb_clk 1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+	};
 };
 
 &pio {
diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
index 19db84486..4519fd791 100644..120000
--- a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
+++ b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
@@ -1,88 +1 @@
-/*
- * Copyright 2015 Vishnu Patekar
- * Vishnu Patekar <vishnupatekar0510@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
-	model = "ET Q8 Quad Core Tablet (v1.6)";
-	compatible = "et,q8-v1.6", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
index 866703355..656603240 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
@@ -42,55 +42,18 @@
 
 /dts-v1/;
 #include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-reference-design-tablet.dtsi"
 
 / {
 	model = "Allwinner GA10H Quad Core Tablet (v1.1)";
 	compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &r_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
 };
 
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+&ehci0 {
 	status = "okay";
 };
 
 &lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-
 	button@600 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
@@ -99,27 +62,6 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
+&ohci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
new file mode 120000
index 000000000..4519fd791
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
@@ -0,0 +1 @@
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
new file mode 100644
index 000000000..b0bc2360f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A33 Tablet";
+	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index 5788c29cb..fef6abc0a 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -63,8 +63,12 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &lradc {
-	vref-supply = <&reg_vcc3v0>;
+	vref-supply = <&reg_dcdc1>;
 	status = "okay";
 
 	button@200 {
@@ -92,7 +96,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
 	cd-inverted;
@@ -102,17 +106,24 @@
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <8>;
 	non-removable;
+	cap-mmc-hw-reset;
 	status = "okay";
 };
 
 &mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 	/* eMMC is missing pull-ups */
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
 		allwinner,pins = "PB4";
@@ -122,8 +133,87 @@
 	};
 };
 
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;
 	status = "okay";
 };
+
+&usbphy {
+	status = "okay";
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 85ee08098..001d8402c 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -72,6 +72,41 @@
 			clock-output-names = "pll11";
 		};
 
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-indices = <1>, <5>,
+				        <6>, <8>, <9>,
+				        <10>, <13>, <14>,
+					<19>, <20>,
+					<21>, <24>, <26>,
+					<29>, <32>, <36>,
+					<40>, <44>, <46>,
+					<52>, <53>,
+					<54>, <57>,
+					<58>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+					"ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
+					"ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
+					"ahb1_hstimer", "ahb1_spi0",
+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
+					"ahb1_gpu", "ahb1_msgbox",
+					"ahb1_spinlock", "ahb1_drc",
+					"ahb1_sat";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "ss";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun8i-a23-mbus-clk";
@@ -80,6 +115,49 @@
 			clock-output-names = "mbus";
 		};
 	};
+
+	soc@01c00000 {
+		crypto: crypto-engine@01c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clock-names = "ahb", "mod";
+			resets = <&ahb1_rst 5>;
+			reset-names = "ahb";
+		};
+
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ahb1_gates 24>;
+			resets = <&ahb1_rst 24>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun8i-a33-usb-phy";
+			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1";
+			clocks = <&usb_clk 8>,
+				 <&usb_clk 9>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&usb_clk 0>,
+				 <&usb_clk 1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+	};
 };
 
 &pio {
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 000000000..342e1d33f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
new file mode 100644
index 000000000..88b1e0970
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+/ {
+	model = "Cubietech Cubietruck Plus";
+	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
new file mode 100644
index 000000000..d3473f81b
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+
+		cpu@100 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x100>;
+		};
+
+		cpu@101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x101>;
+		};
+
+		cpu@102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x102>;
+		};
+
+		cpu@103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* TODO: PRCM block has a mux for this. */
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * This is called "internal OSC" in some places.
+		 * It is an internal RC-based oscillator.
+		 * TODO: Its controls are in the PRCM block.
+		 */
+		osc16M: osc16M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <16000000>;
+			clock-output-names = "osc16M";
+		};
+
+		osc16Md512: osc16Md512_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <512>;
+			clock-mult = <1>;
+			clocks = <&osc16M>;
+			clock-output-names = "osc16M-d512";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&osc24M>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PB9", "PB10";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc24M>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
new file mode 100644
index 000000000..f3b1d5f6d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Plus";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_led_bpi_m2p>;
+
+		pwr_led {
+			label = "bananapi-m2-plus:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_bpi_m2p>;
+
+		sw4 {
+			label = "power";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_bpi_m2p>;
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&r_pio {
+	pwr_led_bpi_m2p: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_bpi_m2p: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	wifi_en_bpi_m2p: wifi_en_pin {
+		allwinner,pins = "PL7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is on as long as VCC-IO is on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
new file mode 100644
index 000000000..f93f5d169
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi 2";
+	compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_opc>;
+
+		sw2 {
+			label = "sw2";
+			linux,code = <BTN_1>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_orangepi>;
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	leds_opc: led_pins@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_opc: key_pins@0 {
+		allwinner,pins = "PL3", "PL4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb1_vbus_pin_a {
+	allwinner,pins = "PG13";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
new file mode 100644
index 000000000..0adf932fd
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi One";
+	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_opc>;
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	leds_opc: led_pins@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_opc: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
new file mode 100644
index 000000000..daf50b9a6
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi PC";
+	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_opc>;
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	leds_opc: led_pins@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_opc: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 000000000..b0cb41787
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi Plus is an extended version of the Orange Pi 2 */
+#include "sun8i-h3-orangepi-2.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_pin_a>;
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+	/* eMMC is missing pull-ups */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+	usb3_vbus_pin_a: usb3_vbus_pin@0 {
+		allwinner,pins = "PG11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&usbphy {
+	usb3_vbus-supply = <&reg_usb3_vbus>;
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
new file mode 100644
index 000000000..fdf9fdbda
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -0,0 +1,497 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		apb0: apb0_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: clk@01f01428 {
+			compatible = "allwinner,sun8i-h3-apb0-gates-clk",
+				     "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01f01428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apb0>;
+			clock-indices = <0>, <1>;
+			clock-output-names = "apb0_pio", "apb0_ir";
+		};
+
+		ir_clk: ir_clk@01f01454 {
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01f01454 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "ir";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun8i-h3-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun8i-h3-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>,
+			      <0x01c1c800 0x4>,
+			      <0x01c1d800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci1: usb@01c1b000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1b400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@01c1c000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@01c1c400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@01c1d000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1d000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@01c1d400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1d400 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun8i-h3-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-h3-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>;
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_cd_pin: mmc0_cd_pin@0 {
+				allwinner,pins = "PF6";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_8bit_pins: mmc2_8bit {
+				allwinner,pins = "PC5", "PC6", "PC8",
+						 "PC9", "PC10", "PC11",
+						 "PC12", "PC13", "PC14",
+						 "PC15", "PC16";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PA4", "PA5";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		rtc: rtc@01f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apb0_reset: reset@01f014b0 {
+			reg = <0x01f014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		ir: ir@01f02000 {
+			compatible = "allwinner,sun5i-a13-ir";
+			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apb0_reset 1>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x40>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun8i-h3-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_reset 0>;
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			ir_pins_a: ir@0 {
+				allwinner,pins = "PL11";
+				allwinner,function = "s_cir_rx";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
new file mode 100644
index 000000000..60fa95850
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+&ehci0 {
+	status  = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts
new file mode 100644
index 000000000..47553e522
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts
@@ -0,0 +1,351 @@
+/*
+ * Copyright 2016 Quentin Schulz
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner R16 EVB (Parrot)";
+	compatible = "allwinner,parrot", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_parrot>;
+
+		led1 {
+			label = "parrot:led1:usr";
+			gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+
+		led2 {
+			label = "parrot:led2:usr";
+			gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+	};
+
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/*
+	 * FIXME: An as-yet-unknown accelerometer is connected to this
+	 * i2c bus.
+	 */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@0 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@1 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
+		allwinner,pins = "PD14";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_parrot: led_pins@0 {
+		allwinner,pins = "PE16", "PE17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_det: usb0_id_detect_pin@0 {
+		allwinner,pins = "PD10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
+		allwinner,pins = "PD12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	wifi_reset_pin_parrot: wifi_reset_pin@0 {
+		allwinner,pins = "PL6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-dsp";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "eldo3";
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_parrot>;
+	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_det>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+};
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
new file mode 100644
index 000000000..9d9036140
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -0,0 +1,216 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en_pin>;
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	bl_en_pin: bl_en_pin@0 {
+		allwinner,pins = "PH6";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 6484dcf69..1526b41c7 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -45,7 +45,6 @@
 
 /dts-v1/;
 #include "sun9i-a80.dtsi"
-#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -62,21 +61,27 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard4>;
 
-&pio {
-	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
-		allwinner,pins = "PH18";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+		green {
+			label = "cubieboard4:green:usr";
+			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
+		};
+
+		red {
+			label = "cubieboard4:red:usr";
+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		};
 	};
 };
 
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
 	cd-inverted;
@@ -86,12 +91,169 @@
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <8>;
 	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+};
+
+&pio {
+	led_pins_cubieboard4: led-pins@0 {
+		allwinner,pins = "PH6", "PH17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
+		allwinner,pins = "PH18";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
 	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+		};
+	};
 };
 
+#include "axp809.dtsi"
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 6ce4b5e8b..7fd22e888 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -44,7 +44,6 @@
 
 /dts-v1/;
 #include "sun9i-a80.dtsi"
-#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -65,7 +64,7 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_optimus>;
+		pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
 
 		/* The LED names match those found on the board */
 
@@ -74,7 +73,10 @@
 			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		/* led3 is on PM15, in R_PIO */
+		led3 {
+			label = "optimus:led3:usr";
+			gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
+		};
 
 		led4 {
 			label = "optimus:led4:usr";
@@ -82,6 +84,17 @@
 		};
 	};
 
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_pin_optimus>;
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	};
+
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -106,15 +119,29 @@
 	status = "okay";
 };
 
-&i2c3 {
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins_a>;
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
 	status = "okay";
 };
 
-&i2c3_pins_a {
-	/* Enable internal pull-up */
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 };
 
 &ohci0 {
@@ -155,48 +182,156 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <4>;
-	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
-	cd-inverted;
+&r_ir {
 	status = "okay";
 };
 
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
+&r_pio {
+	led_r_pins_optimus: led-pins@1 {
+		allwinner,pins = "PM15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
-&reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_optimus>;
-	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+&r_rsb {
 	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+		};
+	};
 };
 
+#include "axp809.dtsi"
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
 
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-
-&uart4_pins_a {
-	/* Enable internal pull-up */
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-};
-
 &usbphy1 {
 	phy-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index a43ad779e..3f528a379 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -128,6 +128,17 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
+		/*
+		 * This clock is actually configurable from the PRCM address
+		 * space. The external 24M oscillator can be turned off, and
+		 * the clock switched to an internal 16M RC oscillator. Under
+		 * normal operation there's no reason to do this, and the
+		 * default is to use the external good one, so just model this
+		 * as a fixed clock. Also it is not entirely clear if the
+		 * osc24M mux in the PRCM affects the entire clock tree, which
+		 * would also throw all the PLL clock rates off, or just the
+		 * downstream clocks in the PRCM.
+		 */
 		osc24M: osc24M_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -135,6 +146,13 @@
 			clock-output-names = "osc24M";
 		};
 
+		/*
+		 * The 32k clock is from an external source, normally the
+		 * AC100 codec/RTC chip. This clock is by default enabled
+		 * and clocked at 32768 Hz, from the oscillator connected
+		 * to the AC100. It is configurable, but no such driver or
+		 * bindings exist yet.
+		 */
 		osc32k: osc32k_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -164,6 +182,14 @@
 					     "usb_phy2", "usb_hsic_12M";
 		};
 
+		pll3: clk@06000008 {
+			/* placeholder until implemented */
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-rate = <0>;
+			clock-output-names = "pll3";
+		};
+
 		pll4: clk@0600000c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun9i-a80-pll4-clk";
@@ -277,9 +303,12 @@
 			compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
 			reg = <0x06000580 0x4>;
 			clocks = <&ahb0>;
-			clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
-					<14>, <15>, <16>, <18>, <20>, <21>,
-					<22>, <23>;
+			clock-indices = <0>, <1>, <3>,
+					<5>, <8>, <12>,
+					<13>, <14>,
+					<15>, <16>, <18>,
+					<20>, <21>, <22>,
+					<23>;
 			clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
 					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
 					"ahb0_nand0", "ahb0_sdram",
@@ -293,7 +322,10 @@
 			compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
 			reg = <0x06000584 0x4>;
 			clocks = <&ahb1>;
-			clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
+			clock-indices = <0>, <1>,
+					<17>, <21>,
+					<22>, <23>,
+					<24>;
 			clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
 					"ahb1_gmac", "ahb1_msgbox",
 					"ahb1_spinlock", "ahb1_hstimer",
@@ -305,8 +337,9 @@
 			compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
 			reg = <0x06000588 0x4>;
 			clocks = <&ahb2>;
-			clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
-					<11>;
+			clock-indices = <0>, <1>,
+					<2>, <4>, <5>,
+					<7>, <8>, <11>;
 			clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
 					"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
 					"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
@@ -317,8 +350,10 @@
 			compatible = "allwinner,sun9i-a80-apb0-gates-clk";
 			reg = <0x06000590 0x4>;
 			clocks = <&apb0>;
-			clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
-					<17>, <18>, <19>;
+			clock-indices = <1>, <5>,
+					<11>, <12>, <13>,
+					<15>, <17>, <18>,
+					<19>;
 			clock-output-names = "apb0_spdif", "apb0_pio",
 					"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
 					"apb0_lradc", "apb0_gpadc", "apb0_twd",
@@ -330,14 +365,79 @@
 			compatible = "allwinner,sun9i-a80-apb1-gates-clk";
 			reg = <0x06000594 0x4>;
 			clocks = <&apb1>;
-			clock-indices = <0>, <1>, <2>, <3>, <4>,
-					<16>, <17>, <18>, <19>, <20>, <21>;
+			clock-indices = <0>, <1>,
+					<2>, <3>, <4>,
+					<16>, <17>,
+					<18>, <19>,
+					<20>, <21>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
 					"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
 					"apb1_uart0", "apb1_uart1",
 					"apb1_uart2", "apb1_uart3",
 					"apb1_uart4", "apb1_uart5";
 		};
+
+		cpus_clk: clk@08001410 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x08001410 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+			clock-output-names = "cpus";
+		};
+
+		ahbs: ahbs_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahbs";
+		};
+
+		apbs: clk@0800141c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x0800141c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahbs>;
+			clock-output-names = "apbs";
+		};
+
+		apbs_gates: clk@08001428 {
+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+			reg = <0x08001428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apbs>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>,
+					<6>, <7>,
+					<12>, <13>,
+					<16>, <17>,
+					<18>, <20>;
+			clock-output-names = "apbs_pio", "apbs_ir",
+					"apbs_timer", "apbs_rsb",
+					"apbs_uart", "apbs_1wire",
+					"apbs_i2c0", "apbs_i2c1",
+					"apbs_ps2_0", "apbs_ps2_1",
+					"apbs_dma", "apbs_i2s0",
+					"apbs_i2s1", "apbs_twd";
+		};
+
+		r_1wire_clk: clk@08001450 {
+			reg = <0x08001450 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_1wire";
+		};
+
+		r_ir_clk: clk@08001454 {
+			reg = <0x08001454 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_ir";
+		};
 	};
 
 	soc {
@@ -443,7 +543,7 @@
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
 				 <&mmc0_clk 1>, <&mmc0_clk 2>;
@@ -457,7 +557,7 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c10000 0x1000>;
 			clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
 				 <&mmc1_clk 1>, <&mmc1_clk 2>;
@@ -471,7 +571,7 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c11000 0x1000>;
 			clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
 				 <&mmc2_clk 1>, <&mmc2_clk 2>;
@@ -485,7 +585,7 @@
 		};
 
 		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c12000 0x1000>;
 			clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
 				 <&mmc3_clk 1>, <&mmc3_clk 2>;
@@ -582,7 +682,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
@@ -604,7 +704,8 @@
 			mmc2_8bit_pins: mmc2_8bit {
 				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",
-						 "PC13", "PC14", "PC15";
+						 "PC13", "PC14", "PC15",
+						 "PC16";
 				allwinner,function = "mmc2";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -752,14 +853,82 @@
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		apbs_rst: reset@080014b0 {
+			reg = <0x080014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@080015a0 {
+			compatible = "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x080015a0 0xc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ir: ir@08002000 {
+			compatible = "allwinner,sun5i-a13-ir";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_pins>;
+			clocks = <&apbs_gates 1>, <&r_ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apbs_rst 1>;
+			reg = <0x08002000 0x40>;
+			status = "disabled";
+		};
+
 		r_uart: serial@08002800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x08002800 0x400>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@08002c00 {
+			compatible = "allwinner,sun9i-a80-r-pinctrl";
+			reg = <0x08002c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 0>;
+			resets = <&apbs_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_ir_pins: r_ir {
+				allwinner,pins = "PL6";
+				allwinner,function = "s_cir_rx";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PN0", "PN1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		r_rsb: i2c@08003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index 51cc8383f..f1953b0c5 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -108,6 +108,7 @@
 		regulator-name = "usb1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		enable-active-high;
 		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
@@ -120,6 +121,7 @@
 		regulator-name = "usb2-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		enable-active-high;
 		gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
new file mode 100644
index 000000000..2565d5137
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
new file mode 100644
index 000000000..b8241462f
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi
new file mode 100644
index 000000000..dd7eb5f62
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-common.dtsi
@@ -0,0 +1,138 @@
+/*
+ * Based on Mans Rullgard's Tango3 DT
+ * https://github.com/mansr/linux-tangox
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#define  CPU_CLK	0
+#define  SYS_CLK	1
+#define  USB_CLK	2
+#define SDIO_CLK	3
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	periph_clk: periph_clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&clkgen CPU_CLK>;
+		clock-mult = <1>;
+		clock-div  = <2>;
+		#clock-cells = <0>;
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x20000000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@0 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x0 0x100>;
+		};
+
+		twd@600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x600 0x10>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+			always-on;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, <0x100 0x100>;
+		};
+	};
+
+	l2cc: l2-cache-controller@20100000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x20100000 0x1000>;
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&irq0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		xtal: xtal {
+			compatible = "fixed-clock";
+			clock-frequency = <27000000>;
+			#clock-cells = <0>;
+		};
+
+		clkgen: clkgen@10000 {
+			compatible = "sigma,tango4-clkgen";
+			reg = <0x10000 0x100>;
+			clocks = <&xtal>;
+			#clock-cells = <1>;
+		};
+
+		tick-counter@10048 {
+			compatible = "sigma,tick-counter";
+			reg = <0x10048 0x4>;
+			clocks = <&xtal>;
+		};
+
+		uart: serial@10700 {
+			compatible = "ralink,rt2880-uart";
+			reg = <0x10700 0x30>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <7372800>;
+			reg-shift = <2>;
+		};
+
+		watchdog@1fd00 {
+			compatible = "sigma,smp8759-wdt";
+			reg = <0x1fd00 8>;
+			clocks = <&xtal>;
+		};
+
+		eth0: ethernet@26000 {
+			compatible = "sigma,smp8734-ethernet";
+			reg = <0x26000 0x800>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkgen SYS_CLK>;
+		};
+
+		intc: interrupt-controller@6e000 {
+			compatible = "sigma,smp8642-intc";
+			reg = <0x6e000 0x400>;
+			ranges = <0 0x6e000 0x400>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			irq0: irq0@000 {
+				reg = <0x000 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			irq1: irq1@100 {
+				reg = <0x100 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			irq2: irq2@300 {
+				reg = <0x300 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi
new file mode 100644
index 000000000..d2e65c46b
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-smp8758.dtsi
@@ -0,0 +1,57 @@
+#include "tango4-common.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "sigma,tango4-smp";
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&l2cc>;
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clkgen CPU_CLK>;
+			clock-latency = <1>;
+			operating-points = <1215000 0 607500 0 405000 0 243000 0 135000 0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&l2cc>;
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+		interrupts =
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		cpu_temp: thermal@920100 {
+			#thermal-sensor-cells = <0>;
+			compatible = "sigma,smp8758-thermal";
+			reg = <0x920100 12>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <997>;		/* milliseconds */
+			polling-delay-passive = <499>;	/* milliseconds */
+			thermal-sensors = <&cpu_temp>;
+			trips {
+				cpu_critical {
+					temperature = <120000>;
+					hysteresis = <2500>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts
new file mode 100644
index 000000000..4cab64cb5
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-vantage-1172.dts
@@ -0,0 +1,36 @@
+/dts-v1/;
+
+#include "tango4-smp8758.dtsi"
+
+/ {
+	model = "Sigma Designs SMP8758 Vantage-1172 Rev E1";
+	compatible = "sigma,vantage-1172", "sigma,smp8758", "sigma,tango4";
+
+	aliases {
+		serial = &uart;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>; /* 2 GB */
+	};
+
+	chosen {
+		stdout-path = "serial:115200n8";
+	};
+};
+
+&eth0 {
+	phy-connection-type = "rgmii";
+	phy-handle = <&eth0_phy>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Atheros AR8035 */
+	eth0_phy: ethernet-phy@4 {
+		compatible = "ethernet-phy-id004d.d072",
+			     "ethernet-phy-ieee802.3-c22";
+		interrupts = <37 IRQ_TYPE_EDGE_RISING>;
+		reg = <4>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 8b7aa0dcd..1444fbd54 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -18,6 +18,10 @@
 		serial0 = &uartd;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -893,7 +897,7 @@
 		palmas: tps65913@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -1145,7 +1149,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -1164,7 +1168,7 @@
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		volume_down {
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 38acf78d7..966a7fc04 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -802,7 +802,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -1020,9 +1020,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		clk32k_in: clock {
+		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -1047,7 +1047,7 @@
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index f91c2c9b2..a161fa1df 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -63,7 +63,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -277,7 +277,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		clk32k_in: clock {
+		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
@@ -292,7 +292,7 @@
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		volume_down {
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index f58a3d9d5..cb9393a53 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -150,7 +150,7 @@
 	};
 
 	timer@60005000 {
-		compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer";
+		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
 		reg = <0x60005000 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -214,9 +214,9 @@
 		#dma-cells = <1>;
 	};
 
-	ahb: ahb@6000c004 {
+	ahb: ahb@6000c000 {
 		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>;
+		reg = <0x6000c000 0x150>;
 	};
 
 	gpio: gpio@6000d000 {
@@ -234,6 +234,9 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 246>;
+		*/
 	};
 
 	apbmisc@70000800 {
@@ -253,7 +256,7 @@
 	 * driver and APB DMA based serial driver for higher baudrate
 	 * and performace. To enable the 8250 based driver, the compatible
 	 * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable
-	 * the APB DMA based serial driver, the comptible is
+	 * the APB DMA based serial driver, the compatible is
 	 * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart".
 	 */
 	uarta: serial@70006000 {
diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
new file mode 100644
index 000000000..ca2c3a557
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
@@ -0,0 +1,1502 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	clock@60006000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-924000000 {
+				clock-frequency = <924000000>;
+				nvidia,parent-clock-frequency = <924000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	emc@7001b000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 0x00000003
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000060
+					0x00000000 0x00000018
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000007 0x0000000f
+					0x00000005 0x00000005
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x00000064
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000007 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x800001c5
+					0x0000000a
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 0x00000005
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x0000009a
+					0x00000000 0x00000026
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000007 0x0000000f
+					0x00000006 0x00000006
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x000000a0
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x0000000b 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x8000023a
+					0x0000000a
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 0x0000000a
+					0x00000000 0x00000001
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000134
+					0x00000000 0x0000004d
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000008 0x0000000f
+					0x0000000c 0x0000000c
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x0000013f
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000015 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x80000370
+					0x0000000a
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 0x00000011
+					0x00000000 0x00000002
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000202
+					0x00000000 0x00000080
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x0000000f 0x0000000f
+					0x00000013 0x00000013
+					0x00000004 0x00000005
+					0x00000004 0x00000001
+					0x00000000 0x00000005
+					0x00000005 0x00000213
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000022 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x8000050e
+					0x0000000a
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 0x0000001a
+					0x00000000 0x00000003
+					0x00000001 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000001
+					0x00000001 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000304
+					0x00000000 0x000000c1
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000018 0x0000000f
+					0x0000001c 0x0000001c
+					0x00000004 0x00000005
+					0x00000004 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x0000031c
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000033 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x80000713
+					0x0000000a
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008cd>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 0x00000035
+					0x00000000 0x00000006
+					0x00000002 0x00000005
+					0x0000000a 0x00000005
+					0x0000000b 0x00000002
+					0x00000002 0x00000003
+					0x00000003 0x00000000
+					0x00000005 0x00000005
+					0x00000006 0x00000002
+					0x00000000 0x00000004
+					0x00000006 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000003
+					0x0000000d 0x0000000f
+					0x00000011 0x00000607
+					0x00000000 0x00000181
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000032 0x0000000f
+					0x00000038 0x00000038
+					0x00000004 0x00000005
+					0x00000004 0x00000006
+					0x00000000 0x00000005
+					0x00000005 0x00000638
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00008000 0x00000000
+					0x00000000 0x00008000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00090000 0x00090000
+					0x00090000 0x00090000
+					0x00009000 0x00009000
+					0x00009000 0x00009000
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000707 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000066 0x00000000
+					0x00000100 0x000e000e
+					0x00000000 0x00000003
+					0x0000d2b3 0x80000d22
+					0x0000000a
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0173000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d 0x0000004d
+					0x00000000 0x00000009
+					0x00000003 0x00000004
+					0x00000008 0x00000002
+					0x00000009 0x00000003
+					0x00000003 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000005 0x00000002
+					0x00000000 0x00000002
+					0x00000007 0x00020000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x0000000e 0x00000010
+					0x00000012 0x000008e4
+					0x00000000 0x00000239
+					0x00000001 0x00000008
+					0x00000001 0x00000000
+					0x0000004b 0x0000000e
+					0x00000052 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000008
+					0x00000000 0x00000005
+					0x00000005 0x00000924
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0x002c00a0 0x00008000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00098000 0x00098000
+					0x00000000 0x00098000
+					0x00098000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00050000 0x00050000
+					0x00050000 0x00050000
+					0x00005000 0x00005000
+					0x00005000 0x00005000
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000096 0x00000000
+					0x00000100 0x0173000e
+					0x00000000 0x00000003
+					0x000052a3 0x800012d7
+					0x00000009
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000011 0x00000066
+					0x00000000 0x0000000c
+					0x00000004 0x00000004
+					0x00000008 0x00000002
+					0x0000000a 0x00000004
+					0x00000004 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000005 0x00000002
+					0x00000000 0x00000001
+					0x00000008 0x00020000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000f 0x00000010
+					0x00000012 0x00000bd1
+					0x00000000 0x000002f4
+					0x00000001 0x00000008
+					0x00000001 0x00000000
+					0x00000063 0x0000000f
+					0x0000006c 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x0000000b
+					0x00000000 0x00000005
+					0x00000005 0x00000c11
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0x002c00a0 0x00008000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00070000 0x00070000
+					0x00000000 0x00070000
+					0x00070000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00038000 0x00038000
+					0x00038000 0x00038000
+					0x00003800 0x00003800
+					0x00003800 0x00003800
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x000000c6 0x00000000
+					0x00000100 0x015b000e
+					0x00000000 0x00000003
+					0x000052a3 0x8000188b
+					0x00000009
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x0139000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 0x00000088
+					0x00000000 0x00000010
+					0x00000006 0x00000006
+					0x00000009 0x00000002
+					0x0000000d 0x00000006
+					0x00000006 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000006 0x00000002
+					0x00000000 0x00000001
+					0x00000009 0x00030000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000010 0x00000012
+					0x00000014 0x00000fd6
+					0x00000000 0x000003f5
+					0x00000002 0x0000000b
+					0x00000001 0x00000000
+					0x00000085 0x00000012
+					0x00000090 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000010
+					0x00000000 0x00000006
+					0x00000006 0x00001017
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe01200b1 0x00008000
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00054000 0x00054000
+					0x00000000 0x00054000
+					0x00054000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x0139000e
+					0x00000000 0x00000003
+					0x000042a0 0x80002062
+					0x0000000a
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0127000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001b 0x0000009b
+					0x00000000 0x00000013
+					0x00000007 0x00000007
+					0x0000000b 0x00000003
+					0x00000010 0x00000007
+					0x00000007 0x00000002
+					0x00000002 0x00000000
+					0x00000005 0x00000005
+					0x0000000a 0x00000002
+					0x00000000 0x00000003
+					0x0000000b 0x00070000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000002
+					0x00000012 0x00000016
+					0x00000018 0x00001208
+					0x00000000 0x00000482
+					0x00000002 0x0000000d
+					0x00000001 0x00000000
+					0x00000097 0x00000015
+					0x000000a3 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000013
+					0x00000000 0x00000006
+					0x00000006 0x00001248
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe00e00b1 0x00008000
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00048000 0x00048000
+					0x00000000 0x00048000
+					0x00048000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x0127000e
+					0x00000000 0x00000003
+					0x000040a0 0x800024aa
+					0x0000000e
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f7000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000024 0x000000cd
+					0x00000000 0x00000019
+					0x0000000a 0x00000008
+					0x0000000d 0x00000004
+					0x00000013 0x0000000a
+					0x0000000a 0x00000004
+					0x00000002 0x00000000
+					0x00000006 0x00000006
+					0x0000000b 0x00000002
+					0x00000000 0x00000002
+					0x0000000d 0x00080000
+					0x00000004 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x00000014 0x00000018
+					0x0000001a 0x000017e2
+					0x00000000 0x000005f8
+					0x00000003 0x00000011
+					0x00000001 0x00000000
+					0x000000c7 0x00000018
+					0x000000d7 0x00000200
+					0x00000005 0x00000006
+					0x00000005 0x00000019
+					0x00000000 0x00000008
+					0x00000008 0x00001822
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe00700b1 0x00008000
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00034000 0x00034000
+					0x00000000 0x00034000
+					0x00034000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000000 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x61861820
+					0x00514514 0x00514514
+					0x61861800 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x00f7000e
+					0x00000000 0x00000004
+					0x00004080 0x80003012
+					0x0000000f
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430303>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200020>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000f15>;
+				nvidia,emc-mrs-wait-cnt = <0x00cd000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x0000004c>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000002b 0x000000f0
+					0x00000000 0x0000001e
+					0x0000000b 0x00000009
+					0x0000000f 0x00000005
+					0x00000016 0x0000000b
+					0x0000000b 0x00000004
+					0x00000002 0x00000000
+					0x00000007 0x00000007
+					0x0000000d 0x00000002
+					0x00000000 0x00000002
+					0x0000000f 0x000a0000
+					0x00000004 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x00000016 0x0000001a
+					0x0000001c 0x00001be7
+					0x00000000 0x000006f9
+					0x00000004 0x00000015
+					0x00000001 0x00000000
+					0x000000e7 0x0000001b
+					0x000000fb 0x00000200
+					0x00000006 0x00000007
+					0x00000006 0x0000001e
+					0x00000000 0x0000000a
+					0x0000000a 0x00001c28
+					0x00000000 0x00000000
+					0x00000000 0x104ab898
+					0xe00400b1 0x00008000
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0002c000 0x0002c000
+					0x00000000 0x0002c000
+					0x0002c000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000000 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x5d75d720
+					0x00514514 0x00514514
+					0x5d75d700 0x0606003f
+					0x00000000 0x00000000
+					0x00000128 0x00cd000e
+					0x00000000 0x00000004
+					0x00004080 0x800037ea
+					0x00000011
+				>;
+			};
+
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 0x8000000a
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x77e30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 0x80000012
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x76230303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 0x80000017
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74a30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 0x8000001e
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74230403 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 0x80000026
+					0x00000001 0x00000001
+					0x00000003 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0503
+					0x73c30504 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 0x80000040
+					0x00000001 0x00000001
+					0x00000004 0x00000002
+					0x00000003 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000004 0x00000006
+					0x06040203 0x000a0504
+					0x73840a05 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 0x80000040
+					0x00000001 0x00000002
+					0x00000007 0x00000004
+					0x00000004 0x00000001
+					0x00000002 0x00000007
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000b0607
+					0x77450e08 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 0x80000040
+					0x00000001 0x00000002
+					0x00000009 0x00000005
+					0x00000006 0x00000001
+					0x00000002 0x00000008
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000d0709
+					0x7586120a 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 0x80000040
+					0x00000002 0x00000003
+					0x0000000c 0x00000007
+					0x00000008 0x00000001
+					0x00000002 0x00000009
+					0x00000002 0x00000002
+					0x00000005 0x00000006
+					0x06050202 0x0010090c
+					0x7428180d 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 0x80000040
+					0x00000003 0x00000004
+					0x0000000e 0x00000009
+					0x0000000a 0x00000001
+					0x00000003 0x0000000b
+					0x00000002 0x00000002
+					0x00000005 0x00000007
+					0x07050202 0x00130b0e
+					0x73a91b0f 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b 0x80000040
+					0x00000004 0x00000005
+					0x00000013 0x0000000c
+					0x0000000d 0x00000002
+					0x00000003 0x0000000c
+					0x00000002 0x00000002
+					0x00000006 0x00000008
+					0x08060202 0x00170e13
+					0x736c2414 0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d 0x80000040
+					0x00000005 0x00000006
+					0x00000016 0x0000000e
+					0x0000000f 0x00000002
+					0x00000004 0x0000000e
+					0x00000002 0x00000002
+					0x00000006 0x00000009
+					0x09060202 0x001a1016
+					0x734e2a17 0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
new file mode 100644
index 000000000..653044a44
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -0,0 +1,284 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1",
+		     "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@40";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie-controller@01003000 {
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t00";
+			reg = <0x68>;
+		};
+	};
+
+	/*
+	 * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
+	 */
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
+	 * on carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* I2C4 (DDC): unused */
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+
+		spidev0: spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	/* SPI4: Apalis SPI2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+
+		spidev1: spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	/* Apalis Serial ATA */
+	sata@70020000 {
+		status = "okay";
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		status = "okay";
+	};
+
+	/* Apalis MMC1 */
+	sdhci@700b0000 {
+		status = "okay";
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* Apalis SD1 */
+	sdhci@700b0400 {
+		status = "okay";
+		/*
+		 * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
+		 * features some magic properties even though the external
+		 * loopback is disabled and the internal loopback used as per
+		 * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being
+		 * set to 0xfffd according to the TRM!
+		 * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+		 */
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		/* BKL1_PWM */
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
new file mode 100644
index 000000000..e7a73db17
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -0,0 +1,2100 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "tegra124.dtsi"
+#include "tegra124-apalis-emc.dtsi"
+
+/*
+ * Toradex Apalis TK1 Module Device Tree
+ * Compatible for Revisions 2GB: V1.0A
+ */
+/ {
+	model = "Toradex Apalis TK1";
+	compatible = "toradex,apalis-tk1", "nvidia,tegra124";
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie-controller@01003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&vdd_1v05>;
+		avdd-pex-pll-supply = <&vdd_1v05>;
+		avdd-pll-erefe-supply = <&avdd_1v05>;
+		dvddio-pex-supply = <&vdd_1v05>;
+		hvdd-pex-pll-e-supply = <&reg_3v3>;
+		hvdd-pex-supply = <&reg_3v3>;
+		vddio-pex-ctl-supply = <&reg_3v3>;
+
+		/* Apalis PCIe (additional lane Apalis type specific) */
+		pci@1,0 {
+			/* PCIE1_RX/TX and TS_DIFF1/2 */
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1";
+		};
+
+		/* I210 Gigabit Ethernet Controller (On-module) */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux: pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAM1_MCLK */
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 { /* DAP1_RESET */
+				nvidia,pins = "pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_CEC */
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_HPD */
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc1_cd_n_pv3 { /* CD# GPIO */
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 { /* D5 GPIO */
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 { /* D4 GPIO */
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/*
+			 * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it
+			 * features some magic properties even though the
+			 * external loopback is disabled and the internal
+			 * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
+			 * register's SDMMC_SPARE1 bits being set to 0xfffd
+			 * according to the TRM!
+			 */
+			sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 { /* D7 GPIO */
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis PWM */
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* PWM3 active on pu6 being Apalis BKL1_PWM */
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/*
+			 * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it
+			 * features some magic properties even though the
+			 * external loopback is disabled and the internal
+			 * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0
+			 * register's SDMMC_SPARE1 bits being set to 0xfffd
+			 * according to the TRM!
+			 */
+			sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPDIF */
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART1 */
+			pb1 { /* DCD GPIO */
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk7 { /* RI GPIO */
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1_txd_pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rxd_pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1_cts_n_pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1_rts_n_pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 { /* DSR GPIO */
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 { /* DTR GPIO */
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart4_rxd_pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart4_txd_pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* CORE_PWR_REQ */
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* CPU_PWR_REQ */
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DVFS */
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_DEV_OFF# */
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_RESET# */
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_WAKE# */
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT1# */
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT2# */
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT3# */
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT4# */
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_RESET */
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MCU SPI */
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 { /* MCU_CS */
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 { /* MCU_CSEZP */
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PMIC_CLK_32K */
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PMIC_CPU_OC_INT */
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_I2C */
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_INT_N */
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* RESET_MOCI_CTRL */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT_N */
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_IN */
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Configure level-shifter as output for HDA */
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_OUT */
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_OE */
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO_PI6 aka TEMP_ALERT_L */
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_INT */
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pc7 { /* NC */
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg0 { /* NC */
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 { /* NC */
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 { /* NC */
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg3 { /* NC */
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 { /* NC */
+				nvidia,pins = "pg4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 { /* NC */
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph5 { /* NC */
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 { /* NC */
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 { /* NC */
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 { /* NC */
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 { /* NC */
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 { /* NC */
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 { /* NC */
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi7 { /* NC */
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 { /* NC */
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 { /* NC */
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 { /* NC */
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 { /* NC */
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 { /* NC */
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 { /* NC */
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 { /* NC */
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 { /* NC */
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 { /* NC */
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 { /* NC */
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 { /* NC */
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 { /* NC */
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 { /* NC */
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 { /* NC */
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 { /* NC */
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 { /* NC */
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 { /* NC */
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 { /* NC */
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 { /* NC */
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 { /* NC */
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row5_pr5 { /* NC */
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 { /* NC */
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 { /* NC */
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row8_ps0 { /* NC */
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 { /* NC */
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 { /* NC */
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 { /* NC */
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 { /* NC */
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 { /* NC */
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row16_pt0 { /* NC */
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 { /* NC */
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 { /* NC */
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 { /* NC */
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 { /* NC */
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cd_n_pv2 { /* NC */
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 { /* NC */
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 { /* NC */
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 { /* NC */
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 { /* NC */
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 { /* NC */
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 { /* NC */
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 { /* NC */
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra124-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra124-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		clock-frequency = <100000>;
+	};
+
+	/* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@0a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			VDDA-supply = <&reg_3v3>;
+			VDDIO-supply = <&vddio_1v8>;
+			clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio2_7 {
+					pins = "gpio2", /* PWR_EN_+V3.3 */
+					       "gpio7"; /* +V1.6_LPO */
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio1_3_4_5_6 {
+					pins = "gpio1", "gpio3", "gpio4",
+					       "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&reg_3v3>;
+				vsup-sd3-supply = <&reg_3v3>;
+				vsup-sd4-supply = <&reg_3v3>;
+				vsup-sd5-supply = <&reg_3v3>;
+				vin-ldo0-supply = <&vddio_ddr_1v35>;
+				vin-ldo1-6-supply = <&reg_3v3>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&reg_3v3>;
+				vin-ldo9-10-supply = <&reg_3v3>;
+				vin-ldo11-supply = <&reg_3v3>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_ddr_1v35: sd2 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05: sd4 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05: ldo0 {
+					regulator-name = "+V1.05_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_sdmmc1: ldo1 {
+					regulator-name = "VDDIO_SDMMC1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo2 {
+					regulator-name = "+V1.2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+V1.05_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				/* 1.8V for LVDS, 3.3V for eDP */
+				ldo4 {
+					regulator-name = "AVDD_LVDS0_PLL";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				/* LDO5 not used */
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				/* LDO7 not used */
+
+				ldo9 {
+					regulator-name = "+V3.3_ETH(ldo9)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo10 {
+					regulator-name = "+V3.3_ETH(ldo10)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo11 {
+					regulator-name = "+V1.8_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+
+		/*
+		 * TMP451 temperature sensor
+		 * Note: THERM_N directly connected to AS3722 PMIC THERM
+		 */
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	/* SPI2: MCU SPI */
+	spi@7000d600 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set power_off bit in ResetControl register of AS3722 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	sata@70020000 {
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+		phy-names = "sata-0";
+
+		avdd-supply = <&vdd_1v05>;
+		hvdd-supply = <&reg_3v3>;
+		vddio-supply = <&vdd_1v05>;
+	};
+
+	usb@70090000 {
+		/* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
+		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
+
+		avddio-pex-supply = <&vdd_1v05>;
+		avdd-pll-erefe-supply = <&avdd_1v05>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05>;
+		avdd-usb-supply = <&reg_3v3>;
+		dvddio-pex-supply = <&vdd_1v05>;
+		hvdd-usb-ss-pll-e-supply = <&reg_3v3>;
+		hvdd-usb-ss-supply = <&reg_3v3>;
+	};
+
+	padctl@7009f000 {
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+
+					pcie-3 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* USBO1 */
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+
+			/* USBH2 */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			/* USBH4 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+		};
+	};
+
+	/* eMMC */
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		i2s@70301200 {
+			status = "okay";
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
+	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.05_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05>;
+	};
+
+	reg_3v3_mxm: regulator-3v3-mxm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_MXM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		/* PWR_EN_+V3.3 */
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3_mxm>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_1v05>;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis TK1";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		cpu {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps because
+				 * there are no cooling devices
+				 */
+			};
+		};
+
+		mem {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps because
+				 * there are no cooling devices
+				 */
+			};
+		};
+
+		gpu {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps because
+				 * there are no cooling devices
+				 */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
index 2c5cede68..accb70551 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
@@ -1,5 +1,5 @@
 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
@@ -78,7 +78,7 @@
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
@@ -2101,7 +2101,7 @@
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index bd43ed6d6..e52b82449 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -10,16 +10,24 @@
 	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
+
+		/* This order keeps the mapping DB9 connector <-> ttyS0 */
 		serial0 = &uartd;
+		serial1 = &uarta;
+		serial2 = &uartb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		status = "okay";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -30,17 +38,23 @@
 		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
 		avdd-pll-erefe-supply = <&avdd_1v05_run>;
 
+		/* Mini PCIe */
 		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
 			status = "okay";
 		};
 
+		/* Gigabit Ethernet */
 		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
 			status = "okay";
 		};
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			hdmi-supply = <&vdd_5v0_hdmi>;
@@ -53,7 +67,15 @@
 		};
 	};
 
-	pinmux: pinmux@0,70000868 {
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux: pinmux@70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
 
@@ -1334,14 +1356,6 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			owr {
-				nvidia,pins = "owr";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
 			clk_32k_in {
 				nvidia,pins = "clk_32k_in";
 				nvidia,function = "clk";
@@ -1356,16 +1370,42 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
+			dsi_b {
+				nvidia,pins = "mipi_pad_ctrl_dsi_b";
+				nvidia,function = "dsi_b";
+			};
 		};
 	};
 
+	/*
+	 * First high speed UART, exposed on the expansion connector J3A2
+	 *   Pin 41: BR_UART1_TXD
+	 *   Pin 44: BR_UART1_RXD
+	 */
+	serial@70006000 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	/*
+	 * Second high speed UART, exposed on the expansion connector J3A2
+	 *   Pin 65: UART2_RXD
+	 *   Pin 68: UART2_TXD
+	 *   Pin 71: UART2_CTS_L
+	 *   Pin 74: UART2_RTS_L
+	 */
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
 	/* DB9 serial port */
-	serial@0,70006300 {
+	serial@70006300 {
 		status = "okay";
 	};
 
 	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -1393,25 +1433,25 @@
 	};
 
 	/* Expansion GEN2_I2C_* */
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion CAM_I2C_* */
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* HDMI DDC */
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion PWR_I2C_*, on-board components */
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -1462,7 +1502,7 @@
 				vin-ldo9-10-supply = <&vdd_5v0_sys>;
 				vin-ldo11-supply = <&vdd_3v3_run>;
 
-				sd0 {
+				vdd_cpu: sd0 {
 					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1400000>;
@@ -1514,7 +1554,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
@@ -1602,12 +1642,12 @@
 	};
 
 	/* Expansion TS_SPI_* */
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 	};
 
 	/* Internal SPI */
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 		spi-flash@0 {
@@ -1617,7 +1657,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -1636,9 +1676,12 @@
 	};
 
 	/* Serial ATA */
-	sata@0,70020000 {
+	sata@70020000 {
 		status = "okay";
 
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+		phy-names = "sata-0";
+
 		hvdd-supply = <&vdd_3v3_lp0>;
 		vddio-supply = <&vdd_1v05_run>;
 		avdd-supply = <&vdd_1v05_run>;
@@ -1647,38 +1690,117 @@
 		target-12v-supply = <&vdd_12v0_sata>;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
-		pinctrl-0 = <&padctl_default>;
-		pinctrl-names = "default";
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
 
-		padctl_default: pinmux {
-			usb3 {
-				nvidia,lanes = "pcie-0", "pcie-1";
-				nvidia,function = "usb3";
-				nvidia,iddq = <0>;
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
 			};
 
 			pcie {
-				nvidia,lanes = "pcie-2", "pcie-3",
-					       "pcie-4";
-				nvidia,function = "pcie";
-				nvidia,iddq = <0>;
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+				};
 			};
 
 			sata {
-				nvidia,lanes = "sata-0";
-				nvidia,function = "sata";
-				nvidia,iddq = <0>;
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* Micro A/B */
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+			};
+
+			/* Mini PCIe */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+			};
+
+			/* USB3 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
 			};
 		};
 	};
 
 	/* SD card */
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -1688,33 +1810,40 @@
 	};
 
 	/* eMMC */
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
 
 	/* mini-PCIe USB */
-	usb@0,7d004000 {
+	usb@7d004000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d004000 {
+	usb-phy@7d004000 {
 		status = "okay";
 	};
 
 	/* USB A connector */
-	usb@0,7d008000 {
+	usb@7d008000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d008000 {
+	usb-phy@7d008000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
@@ -1732,6 +1861,12 @@
 		};
 	};
 
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -1740,7 +1875,7 @@
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -1910,7 +2045,7 @@
 	thermal-zones {
 		cpu {
 			trips {
-				trip@0 {
+				trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
@@ -1924,7 +2059,7 @@
 
 		mem {
 			trips {
-				trip@0 {
+				trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
@@ -1938,7 +2073,7 @@
 
 		gpu {
 			trips {
-				trip@0 {
+				trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
index 1a5748d05..4458e86b2 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
@@ -1,5 +1,5 @@
 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -67,7 +67,7 @@
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -1754,7 +1754,7 @@
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index 2d21253ea..67d7cfb32 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -15,7 +15,7 @@
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	sdhci@0,700b0400 { /* SD Card on this bus */
+	sdhci@700b0400 { /* SD Card on this bus */
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
 	};
 
@@ -26,7 +26,7 @@
 		nvidia,model = "GoogleNyanBig";
 	};
 
-	pinmux@0,70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
index 9ecd108f5..4e7b59e25 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
@@ -1,5 +1,5 @@
 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -67,7 +67,7 @@
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -1754,7 +1754,7 @@
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 0d30c514f..c9582361c 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -22,7 +22,7 @@
 		nvidia,model = "GoogleNyanBlaze";
 	};
 
-	pinmux@0,70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index a9aec23e0..271505e07 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -3,17 +3,21 @@
 
 / {
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			vdd-supply = <&vdd_3v3_hdmi>;
@@ -25,29 +29,29 @@
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			status = "okay";
 
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
 
-		dpaux@0,545c0000 {
+		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
 		};
 	};
 
-	serial@0,70006000 {
+	serial@70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
 		status = "okay";
 	};
 
-	pwm@0,7000a000 {
+	pwm@7000a000 {
 		status = "okay";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -68,7 +72,7 @@
 		};
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -81,7 +85,7 @@
 		};
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -91,12 +95,12 @@
 		};
 	};
 
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -159,7 +163,7 @@
 				vin-ldo9-10-supply = <&vdd_5v0_sys>;
 				vin-ldo11-supply = <&vdd_3v3_run>;
 
-				sd0 {
+				vdd_cpu: sd0 {
 					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1350000>;
@@ -220,7 +224,7 @@
 					regulator-always-on;
 				};
 
-				ldo0 {
+				avdd_1v05_run: ldo0 {
 					regulator-name = "+1.05V_RUN_AVDD";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
@@ -297,7 +301,7 @@
 		};
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 
 		cros_ec: cros-ec@0 {
@@ -338,7 +342,7 @@
 		};
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 
@@ -349,7 +353,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -360,8 +364,101 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
 		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				vbus-supply = <&vdd_usb1_vbus>;
+				status = "okay";
+				mode = "otg";
+			};
+
+			usb2-1 {
+				vbus-supply = <&vdd_run_cam>;
+				status = "okay";
+				mode = "host";
+			};
+
+			usb2-2 {
+				vbus-supply = <&vdd_usb3_vbus>;
+				status = "okay";
+				mode = "host";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <1>;
+				status = "okay";
+			};
+		};
 	};
 
 	sdhci0_pwrseq: sdhci0_pwrseq {
@@ -370,7 +467,7 @@
 		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	sdhci@0,700b0000 { /* WiFi/BT on this bus */
+	sdhci@700b0000 { /* WiFi/BT on this bus */
 		status = "okay";
 		bus-width = <4>;
 		no-1-8-v;
@@ -381,7 +478,7 @@
 		keep-power-in-suspend;
 	};
 
-	sdhci@0,700b0400 { /* SD Card on this bus */
+	sdhci@700b0400 { /* SD Card on this bus */
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -390,44 +487,24 @@
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@0,700b0600 { /* eMMC on this bus */
+	sdhci@700b0600 { /* eMMC on this bus */
 		status = "okay";
 		bus-width = <8>;
 		no-1-8-v;
 		non-removable;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
-			status = "okay";
-		};
-	};
-
-	usb@0,7d000000 { /* Rear external USB port. */
-		status = "okay";
-	};
-
-	usb-phy@0,7d000000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb1_vbus>;
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "disabled";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
 	};
 
-	usb@0,7d004000 { /* Internal webcam. */
-		status = "okay";
-	};
-
-	usb-phy@0,7d004000 {
-		status = "okay";
-		vbus-supply = <&vdd_run_cam>;
-	};
-
-	usb@0,7d008000 { /* Left external USB port. */
-		status = "okay";
-	};
-
-	usb-phy@0,7d008000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb3_vbus>;
+	ahub@70300000 {
+		i2s@70301100 {
+			status = "okay";
+		};
 	};
 
 	backlight: backlight {
@@ -487,6 +564,12 @@
 		};
 	};
 
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -496,7 +579,7 @@
 			linux,input-type = <5>;
 			linux,code = <KEY_RESERVED>;
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		power {
@@ -504,7 +587,7 @@
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			debounce-interval = <30>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 79e724bb7..6e59cec09 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -8,17 +8,21 @@
 	compatible = "nvidia,venice2", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			vdd-supply = <&vdd_3v3_hdmi>;
@@ -30,20 +34,28 @@
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			status = "okay";
 
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
 
-		dpaux@0,545c0000 {
+		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
 		};
 	};
 
-	pinmux: pinmux@0,70000868 {
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux: pinmux@70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
 
@@ -584,15 +596,15 @@
 		};
 	};
 
-	serial@0,70006000 {
+	serial@70006000 {
 		status = "okay";
 	};
 
-	pwm@0,7000a000 {
+	pwm@7000a000 {
 		status = "okay";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -604,7 +616,7 @@
 		};
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -617,17 +629,17 @@
 		};
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -735,7 +747,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
@@ -745,7 +757,7 @@
 					regulator-always-on;
 				};
 
-				ldo0 {
+				avdd_1v05_run: ldo0 {
 					regulator-name = "+1.05V_RUN_AVDD";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
@@ -822,7 +834,7 @@
 		};
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 
 		cros_ec: cros-ec@0 {
@@ -862,7 +874,7 @@
 		};
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 		spi-flash@0 {
@@ -872,7 +884,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -883,11 +895,110 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	sdhci@0,700b0400 {
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+
+				vbus-supply = <&vdd_usb1_vbus>;
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_run_cam>;
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	sdhci@700b0400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
@@ -896,41 +1007,41 @@
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
 
-	usb@0,7d000000 {
+	usb@7d000000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d000000 {
+	usb-phy@7d000000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb1_vbus>;
 	};
 
-	usb@0,7d004000 {
+	usb@7d004000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d004000 {
+	usb-phy@7d004000 {
 		status = "okay";
 		vbus-supply = <&vdd_run_cam>;
 	};
 
-	usb@0,7d008000 {
+	usb@7d008000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d008000 {
+	usb-phy@7d008000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
@@ -967,7 +1078,7 @@
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 01a9f742b..ea340f9de 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -2,8 +2,8 @@
 #include <dt-bindings/gpio/tegra-gpio.h>
 #include <dt-bindings/memory/tegra124-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/tegra124-car.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
 
 #include "skeleton.dtsi"
@@ -14,7 +14,7 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
 		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
@@ -50,9 +50,6 @@
 		reset-names = "pex", "afi", "pcie_x";
 		status = "disabled";
 
-		phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>;
-		phy-names = "pcie";
-
 		pci@1,0 {
 			device_type = "pci";
 			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
@@ -80,7 +77,7 @@
 		};
 	};
 
-	host1x@0,50000000 {
+	host1x@50000000 {
 		compatible = "nvidia,tegra124-host1x", "simple-bus";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
@@ -94,7 +91,7 @@
 
 		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
 
-		dc@0,54200000 {
+		dc@54200000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -109,7 +106,7 @@
 			nvidia,head = <0>;
 		};
 
-		dc@0,54240000 {
+		dc@54240000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54240000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -124,7 +121,7 @@
 			nvidia,head = <1>;
 		};
 
-		hdmi@0,54280000 {
+		hdmi@54280000 {
 			compatible = "nvidia,tegra124-hdmi";
 			reg = <0x0 0x54280000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -136,7 +133,7 @@
 			status = "disabled";
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			compatible = "nvidia,tegra124-sor";
 			reg = <0x0 0x54540000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -150,7 +147,7 @@
 			status = "disabled";
 		};
 
-		dpaux: dpaux@0,545c0000 {
+		dpaux: dpaux@545c0000 {
 			compatible = "nvidia,tegra124-dpaux";
 			reg = <0x0 0x545c0000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
@@ -163,7 +160,7 @@
 		};
 	};
 
-	gic: interrupt-controller@0,50041000 {
+	gic: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -176,6 +173,11 @@
 		interrupt-parent = <&gic>;
 	};
 
+	/*
+	 * Please keep the following 0, notation in place as a former mainline
+	 * U-Boot version was looking for that particular notation in order to
+	 * perform required fix-ups on that GPU node.
+	 */
 	gpu@0,57000000 {
 		compatible = "nvidia,gk20a";
 		reg = <0x0 0x57000000 0x0 0x01000000>,
@@ -188,6 +190,9 @@
 		clock-names = "gpu", "pwr";
 		resets = <&tegra_car 184>;
 		reset-names = "gpu";
+
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+
 		status = "disabled";
 	};
 
@@ -203,8 +208,8 @@
 		interrupt-parent = <&gic>;
 	};
 
-	timer@0,60005000 {
-		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
+	timer@60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,7 +220,7 @@
 		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
 	};
 
-	tegra_car: clock@0,60006000 {
+	tegra_car: clock@60006000 {
 		compatible = "nvidia,tegra124-car";
 		reg = <0x0 0x60006000 0x0 0x1000>;
 		#clock-cells = <1>;
@@ -223,12 +228,12 @@
 		nvidia,external-memory-controller = <&emc>;
 	};
 
-	flow-controller@0,60007000 {
+	flow-controller@60007000 {
 		compatible = "nvidia,tegra124-flowctrl";
 		reg = <0x0 0x60007000 0x0 0x1000>;
 	};
 
-	actmon@0,6000c800 {
+	actmon@6000c800 {
 		compatible = "nvidia,tegra124-actmon";
 		reg = <0x0 0x6000c800 0x0 0x400>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -239,7 +244,7 @@
 		reset-names = "actmon";
 	};
 
-	gpio: gpio@0,6000d000 {
+	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
 		reg = <0x0 0x6000d000 0x0 0x1000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
@@ -254,9 +259,12 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 251>;
+		*/
 	};
 
-	apbdma: dma@0,60020000 {
+	apbdma: dma@60020000 {
 		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
 		reg = <0x0 0x60020000 0x0 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -297,13 +305,13 @@
 		#dma-cells = <1>;
 	};
 
-	apbmisc@0,70000800 {
+	apbmisc@70000800 {
 		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
 		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
 		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		compatible = "nvidia,tegra124-pinmux";
 		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
 		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
@@ -315,10 +323,10 @@
 	 * driver and APB DMA based serial driver for higher baudrate
 	 * and performace. To enable the 8250 based driver, the compatible
 	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
-	 * the APB DMA based serial driver, the comptible is
+	 * the APB DMA based serial driver, the compatible is
 	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
 	 */
-	uarta: serial@0,70006000 {
+	uarta: serial@70006000 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006000 0x0 0x40>;
 		reg-shift = <2>;
@@ -331,7 +339,7 @@
 		status = "disabled";
 	};
 
-	uartb: serial@0,70006040 {
+	uartb: serial@70006040 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006040 0x0 0x40>;
 		reg-shift = <2>;
@@ -344,7 +352,7 @@
 		status = "disabled";
 	};
 
-	uartc: serial@0,70006200 {
+	uartc: serial@70006200 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006200 0x0 0x40>;
 		reg-shift = <2>;
@@ -357,7 +365,7 @@
 		status = "disabled";
 	};
 
-	uartd: serial@0,70006300 {
+	uartd: serial@70006300 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006300 0x0 0x40>;
 		reg-shift = <2>;
@@ -370,7 +378,7 @@
 		status = "disabled";
 	};
 
-	pwm: pwm@0,7000a000 {
+	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
@@ -380,7 +388,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -395,7 +403,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +418,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -425,7 +433,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c700 {
+	i2c@7000c700 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -440,7 +448,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +463,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000d100 {
+	i2c@7000d100 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
@@ -470,7 +478,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d400 0x0 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -485,7 +493,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000d600 {
+	spi@7000d600 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d600 0x0 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -500,7 +508,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000d800 {
+	spi@7000d800 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d800 0x0 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -515,7 +523,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000da00 0x0 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -530,7 +538,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000dc00 {
+	spi@7000dc00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000dc00 0x0 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -545,7 +553,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000de00 {
+	spi@7000de00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000de00 0x0 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -560,21 +568,21 @@
 		status = "disabled";
 	};
 
-	rtc@0,7000e000 {
+	rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_RTC>;
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		compatible = "nvidia,tegra124-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 	};
 
-	fuse@0,7000f800 {
+	fuse@7000f800 {
 		compatible = "nvidia,tegra124-efuse";
 		reg = <0x0 0x7000f800 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
@@ -583,7 +591,7 @@
 		reset-names = "fuse";
 	};
 
-	mc: memory-controller@0,70019000 {
+	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
 		clocks = <&tegra_car TEGRA124_CLK_MC>;
@@ -594,44 +602,36 @@
 		#iommu-cells = <1>;
 	};
 
-	emc: emc@0,7001b000 {
+	emc: emc@7001b000 {
 		compatible = "nvidia,tegra124-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
 
 		nvidia,memory-controller = <&mc>;
 	};
 
-	sata@0,70020000 {
+	sata@70020000 {
 		compatible = "nvidia,tegra124-ahci";
-
 		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
-			<0x0 0x70020000 0x0 0x7000>; /* SATA */
-
+		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-
 		clocks = <&tegra_car TEGRA124_CLK_SATA>,
-			<&tegra_car TEGRA124_CLK_SATA_OOB>,
-			<&tegra_car TEGRA124_CLK_CML1>,
-			<&tegra_car TEGRA124_CLK_PLL_E>;
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
+			 <&tegra_car TEGRA124_CLK_CML1>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
 		clock-names = "sata", "sata-oob", "cml1", "pll_e";
-
 		resets = <&tegra_car 124>,
-			<&tegra_car 123>,
-			<&tegra_car 129>;
+			 <&tegra_car 123>,
+			 <&tegra_car 129>;
 		reset-names = "sata", "sata-oob", "sata-cold";
-
-		phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
-		phy-names = "sata-phy";
-
 		status = "disabled";
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
 		reg = <0x0 0x70030000 0x0 0x10000>;
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_HDA>,
-		         <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
 			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
 		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
 		resets = <&tegra_car 125>, /* hda */
@@ -641,16 +641,175 @@
 		status = "disabled";
 	};
 
-	padctl: padctl@0,7009f000 {
+	usb@70090000 {
+		compatible = "nvidia,tegra124-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA124_CLK_CLK_M>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
 		compatible = "nvidia,tegra124-xusb-padctl";
 		reg = <0x0 0x7009f000 0x0 0x1000>;
 		resets = <&tegra_car 142>;
 		reset-names = "padctl";
 
-		#phy-cells = <1>;
+		pads {
+			usb2 {
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			ulpi {
+				status = "disabled";
+
+				lanes {
+					ulpi-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			ulpi-0 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			hsic-1 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+		};
 	};
 
-	sdhci@0,700b0000 {
+	sdhci@700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -660,7 +819,7 @@
 		status = "disabled";
 	};
 
-	sdhci@0,700b0200 {
+	sdhci@700b0200 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -670,7 +829,7 @@
 		status = "disabled";
 	};
 
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -680,7 +839,7 @@
 		status = "disabled";
 	};
 
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -690,7 +849,7 @@
 		status = "disabled";
 	};
 
-	soctherm: thermal-sensor@0,700e2000 {
+	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
 		reg = <0x0 0x700e2000 0x0 0x1000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -702,7 +861,31 @@
 		#thermal-sensor-cells = <1>;
 	};
 
-	ahub@0,70300000 {
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra124-dfll";
+		reg = <0 0x70110000 0 0x100>, /* DFLL control */
+		      <0 0x70110000 0 0x100>, /* I2C output control */
+		      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+		      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,sample-rate = <12500>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
+	ahub@70300000 {
 		compatible = "nvidia,tegra124-ahub";
 		reg = <0x0 0x70300000 0x0 0x200>,
 		      <0x0 0x70300800 0x0 0x800>,
@@ -754,7 +937,7 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 
-		tegra_i2s0: i2s@0,70301000 {
+		tegra_i2s0: i2s@70301000 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301000 0x0 0x100>;
 			nvidia,ahub-cif-ids = <4 4>;
@@ -764,7 +947,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s1: i2s@0,70301100 {
+		tegra_i2s1: i2s@70301100 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301100 0x0 0x100>;
 			nvidia,ahub-cif-ids = <5 5>;
@@ -774,7 +957,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s2: i2s@0,70301200 {
+		tegra_i2s2: i2s@70301200 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301200 0x0 0x100>;
 			nvidia,ahub-cif-ids = <6 6>;
@@ -784,7 +967,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s3: i2s@0,70301300 {
+		tegra_i2s3: i2s@70301300 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301300 0x0 0x100>;
 			nvidia,ahub-cif-ids = <7 7>;
@@ -794,7 +977,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s4: i2s@0,70301400 {
+		tegra_i2s4: i2s@70301400 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301400 0x0 0x100>;
 			nvidia,ahub-cif-ids = <8 8>;
@@ -805,7 +988,7 @@
 		};
 	};
 
-	usb@0,7d000000 {
+	usb@7d000000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d000000 0x0 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -817,7 +1000,7 @@
 		status = "disabled";
 	};
 
-	phy1: usb-phy@0,7d000000 {
+	phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -842,7 +1025,7 @@
 		status = "disabled";
 	};
 
-	usb@0,7d004000 {
+	usb@7d004000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d004000 0x0 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -854,7 +1037,7 @@
 		status = "disabled";
 	};
 
-	phy2: usb-phy@0,7d004000 {
+	phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -878,7 +1061,7 @@
 		status = "disabled";
 	};
 
-	usb@0,7d008000 {
+	usb@7d008000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d008000 0x0 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -890,7 +1073,7 @@
 		status = "disabled";
 	};
 
-	phy3: usb-phy@0,7d008000 {
+	phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -922,6 +1105,15 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+				 <&tegra_car TEGRA124_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA124_CLK_PLL_X>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
 		};
 
 		cpu@1 {
@@ -943,6 +1135,18 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>,
+				     <&{/cpus/cpu@2}>,
+				     <&{/cpus/cpu@3}>;
+	};
+
 	thermal-zones {
 		cpu {
 			polling-delay-passive = <1000>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index 8e0066ad9..1242b841f 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -478,7 +478,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index b926a07b9..d4fb4d39e 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -13,6 +13,10 @@
 		serial0 = &uartd;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x00000000 0x40000000>;
 	};
@@ -642,7 +646,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -655,7 +659,7 @@
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts
index 1dd7d7bfd..bb56dfe9e 100644
--- a/arch/arm/boot/dts/tegra20-iris-512.dts
+++ b/arch/arm/boot/dts/tegra20-iris-512.dts
@@ -11,6 +11,10 @@
 		serial1 = &uartd;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	host1x@50000000 {
 		hdmi@54280000 {
 			status = "okay";
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index 9b87526ab..34c6588e9 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -10,6 +10,10 @@
 		serial0 = &uartd;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	pwm@7000a000 {
 		status = "okay";
 	};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index ed7e10093..4e361a8c1 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -14,6 +14,10 @@
 		serial1 = &uartc;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
@@ -508,7 +512,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -521,7 +525,7 @@
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index aea8994b3..2017acacc 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -13,6 +13,10 @@
 		serial0 = &uartd;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x00000000 0x40000000>;
 	};
@@ -794,7 +798,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -807,7 +811,7 @@
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid {
@@ -816,7 +820,7 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 13d4e6185..27d2bbbf1 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -10,6 +10,10 @@
 		serial0 = &uartd;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
@@ -504,7 +508,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index d99af4ef9..381747f11 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -13,6 +13,10 @@
 		serial0 = &uarta;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x00000000 0x40000000>;
 	};
@@ -379,7 +383,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -392,7 +396,7 @@
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 04c58e9ca..8f0aaabf7 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -13,6 +13,10 @@
 		serial0 = &uartd;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x00000000 0x40000000>;
 	};
@@ -588,7 +592,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -601,7 +605,7 @@
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 340d81108..1e06f854c 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -13,6 +13,10 @@
 		serial0 = &uarta;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x00000000 0x20000000>;
 	};
@@ -508,7 +512,7 @@
 		nvidia,repeat-delay-ms = <160>;
 		nvidia,kbc-row-pins = <0 1 2>;
 		nvidia,kbc-col-pins = <16 17>;
-		nvidia,wakeup-source;
+		wakeup-source;
 		linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER)
 				MATRIX_KEY(0x01, 0x00, KEY_HOME)
 				MATRIX_KEY(0x01, 0x01, KEY_BACK)
@@ -565,7 +569,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index f444b67f5..2207c08e3 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -145,7 +145,7 @@
 		interrupt-parent = <&intc>;
 		reg = <0x50040600 0x20>;
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&tegra_car TEGRA20_CLK_TWD>;
 	};
 
@@ -225,9 +225,9 @@
 		#dma-cells = <1>;
 	};
 
-	ahb@6000c004 {
+	ahb@6000c000 {
 		compatible = "nvidia,tegra20-ahb";
-		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+		reg = <0x6000c000 0x110>; /* AHB Arbitration + Gizmo Controller */
 	};
 
 	gpio: gpio@6000d000 {
@@ -244,6 +244,9 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 224>;
+		*/
 	};
 
 	apbmisc@70000800 {
@@ -306,7 +309,7 @@
 	 * driver and APB DMA based serial driver for higher baudrate
 	 * and performace. To enable the 8250 based driver, the compatible
 	 * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
-	 * driver, the comptible is "nvidia,tegra20-hsuart".
+	 * driver, the compatible is "nvidia,tegra20-hsuart".
 	 */
 	uarta: serial@70006000 {
 		compatible = "nvidia,tegra20-uart";
@@ -600,8 +603,8 @@
 			 <&tegra_car TEGRA20_CLK_PLL_E>;
 		clock-names = "pex", "afi", "pll_e";
 		resets = <&tegra_car 70>,
-		         <&tegra_car 72>,
-		         <&tegra_car 74>;
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
 		status = "disabled";
 
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 6236bdecb..99a69457d 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -17,6 +17,10 @@
 		serial3 = &uartd;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	pcie-controller@00003000 {
 		status = "okay";
 
@@ -126,6 +130,10 @@
 		};
 	};
 
+	hda@70030000 {
+		status = "okay";
+	};
+
 	sd1: sdhci@78000000 {
 		status = "okay";
 		bus-width = <4>;
@@ -149,6 +157,7 @@
 
 	usb-phy@7d000000 {
 		status = "okay";
+		dr_mode = "otg";
 		vbus-supply = <&usbo1_vbus_reg>;
 	};
 
@@ -175,7 +184,7 @@
 	backlight: backlight {
 		compatible = "pwm-backlight";
 
-		/* PWM0 */
+		/* PWM_BKL1 */
 		pwms = <&pwm 0 5000000>;
 		brightness-levels = <255 231 223 207 191 159 127 0>;
 		default-brightness-level = <6>;
@@ -186,12 +195,12 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index a5446cba9..192b95177 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -1,8 +1,9 @@
 #include "tegra30.dtsi"
 
 /*
- * Toradex Apalis T30 Device Tree
- * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A;
+ * 2GB: V1.0B, V1.0C, V1.0E, V1.1A
  */
 / {
 	model = "Toradex Apalis T30";
@@ -33,8 +34,8 @@
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
+			vdd-supply = <&avdd_hdmi_3v3_reg>;
+			pll-supply = <&avdd_hdmi_pll_1v8_reg>;
 
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -57,25 +58,25 @@
 
 			/* Apalis BKL1_PWM */
 			uart3_rts_n_pc0 {
-				nvidia,pins =	"uart3_rts_n_pc0";
+				nvidia,pins = "uart3_rts_n_pc0";
 				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
 			uart3_cts_n_pa1 {
-				nvidia,pins =	"uart3_cts_n_pa1";
-				nvidia,function = "rsvd1";
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis CAN1 on SPI6 */
 			spi2_cs0_n_px3 {
-				nvidia,pins =   "spi2_cs0_n_px3",
-						"spi2_miso_px1",
-						"spi2_mosi_px0",
-						"spi2_sck_px2";
+				nvidia,pins = "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2";
 				nvidia,function = "spi6";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -91,10 +92,10 @@
 
 			/* Apalis CAN2 on SPI4 */
 			gmi_a16_pj7 {
-				nvidia,pins =   "gmi_a16_pj7",
-						"gmi_a17_pb0",
-						"gmi_a18_pb1",
-						"gmi_a19_pk7";
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
 				nvidia,function = "spi4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -108,6 +109,30 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
+			/* Apalis Digital Audio */
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Apalis I2C3 */
 			cam_i2c_scl_pbb1 {
 				nvidia,pins = "cam_i2c_scl_pbb1",
@@ -122,21 +147,21 @@
 
 			/* Apalis MMC1 */
 			sdmmc3_clk_pa6 {
-				nvidia,pins =	"sdmmc3_clk_pa6",
-						"sdmmc3_cmd_pa7";
+				nvidia,pins = "sdmmc3_clk_pa6",
+					      "sdmmc3_cmd_pa7";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc3_dat0_pb7 {
-				nvidia,pins =	"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4",
-						"sdmmc3_dat4_pd1",
-						"sdmmc3_dat5_pd0",
-						"sdmmc3_dat6_pd3",
-						"sdmmc3_dat7_pd4";
+				nvidia,pins = "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -151,32 +176,32 @@
 			};
 
 			/* Apalis PWM1 */
-			gpio_pu6 {
-				nvidia,pins =	"gpio_pu6";
+			pu6 {
+				nvidia,pins = "pu6";
 				nvidia,function = "pwm3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis PWM2 */
-			gpio_pu5 {
-				nvidia,pins =	"gpio_pu5";
+			pu5 {
+				nvidia,pins = "pu5";
 				nvidia,function = "pwm2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis PWM3 */
-			gpio_pu4 {
-				nvidia,pins =	"gpio_pu4";
+			pu4 {
+				nvidia,pins = "pu4";
 				nvidia,function = "pwm1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis PWM4 */
-			gpio_pu3 {
-				nvidia,pins =	"gpio_pu3";
+			pu3 {
+				nvidia,pins = "pu3";
 				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -198,11 +223,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -218,10 +243,10 @@
 
 			/* Apalis SPI1 */
 			spi1_sck_px5 {
-				nvidia,pins =   "spi1_sck_px5",
-						"spi1_mosi_px4",
-						"spi1_miso_px7",
-						"spi1_cs0_n_px6";
+				nvidia,pins = "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_miso_px7",
+					      "spi1_cs0_n_px6";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -229,10 +254,10 @@
 
 			/* Apalis SPI2 */
 			lcd_sck_pz4 {
-				nvidia,pins =   "lcd_sck_pz4",
-						"lcd_sdout_pn5",
-						"lcd_sdin_pz2",
-						"lcd_cs0_n_pn4";
+				nvidia,pins = "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_sdin_pz2",
+					      "lcd_cs0_n_pn4";
 				nvidia,function = "spi5";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -240,14 +265,14 @@
 
 			/* Apalis UART1 */
 			ulpi_data0 {
-				nvidia,pins =   "ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -255,10 +280,10 @@
 
 			/* Apalis UART2 */
 			ulpi_clk_py0 {
-				nvidia,pins =   "ulpi_clk_py0",
-						"ulpi_dir_py1",
-						"ulpi_nxt_py2",
-						"ulpi_stp_py3";
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
 				nvidia,function = "uartd";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -266,8 +291,8 @@
 
 			/* Apalis UART3 */
 			uart2_rxd_pc3 {
-				nvidia,pins =   "uart2_rxd_pc3",
-						"uart2_txd_pc2";
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
 				nvidia,function = "uartb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -275,8 +300,8 @@
 
 			/* Apalis UART4 */
 			uart3_rxd_pw7 {
-				nvidia,pins =   "uart3_rxd_pw7",
-						"uart3_txd_pw6";
+				nvidia,pins = "uart3_rxd_pw7",
+					      "uart3_txd_pw6";
 				nvidia,function = "uartc";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -312,21 +337,21 @@
 
 			/* eMMC (On-module) */
 			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_rst_n_pcc3";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -334,10 +359,10 @@
 
 			/* LVDS Transceiver Configuration */
 			pbb0 {
-				nvidia,pins =	"pbb0",
-						"pbb7",
-						"pcc1",
-						"pcc2";
+				nvidia,pins = "pbb0",
+					      "pbb7",
+					      "pcc1",
+					      "pcc2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -345,10 +370,10 @@
 				nvidia,lock = <TEGRA_PIN_DISABLE>;
 			};
 			pbb3 {
-				nvidia,pins =	"pbb3",
-						"pbb4",
-						"pbb5",
-						"pbb6";
+				nvidia,pins = "pbb3",
+					      "pbb4",
+					      "pbb5",
+					      "pbb6";
 				nvidia,function = "displayb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -542,7 +567,7 @@
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
 
-			stmpe_touchscreen {
+			stmpe_touchscreen@0 {
 				compatible = "st,stmpe-ts";
 				reg = <0>;
 				/* 3.25 MHz ADC clock speed */
@@ -635,6 +660,7 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	/* eMMC */
 	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
@@ -648,13 +674,14 @@
 
 		clk32k_in: clk@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
+
 		clk16m: clk@1 {
 			compatible = "fixed-clock";
-			reg=<1>;
+			reg = <1>;
 			#clock-cells = <0>;
 			clock-frequency = <16000000>;
 			clock-output-names = "clk16m";
@@ -666,18 +693,40 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		sys_3v3_reg: regulator@100 {
+		avdd_hdmi_pll_1v8_reg: regulator@100 {
 			compatible = "regulator-fixed";
 			reg = <100>;
+			regulator-name = "+V1.8_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vio_reg>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
 			regulator-name = "3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		charge_pump_5v0_reg: regulator@101 {
+		avdd_hdmi_3v3_reg: regulator@102 {
 			compatible = "regulator-fixed";
-			reg = <101>;
+			reg = <102>;
+			regulator-name = "+V3.3_AVDD_HDMI";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		charge_pump_5v0_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
 			regulator-name = "5v0";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 3dede3934..035000284 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -12,6 +12,10 @@
 		serial0 = &uarta;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x80000000 0x7ff00000>;
 	};
@@ -1839,7 +1843,7 @@
 
 				ldo5_reg: ldo5 {
 					regulator-name = "vddio_sdmmc,avdd_vdac";
-					regulator-min-microvolt = <3300000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
@@ -1910,6 +1914,7 @@
 
 	sdhci@78000000 {
 		status = "okay";
+		vqmmc-supply = <&ldo5_reg>;
 		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
 		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
@@ -1947,7 +1952,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index bb1ca1582..f11012bb5 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -35,6 +35,10 @@
 		serial1 = &uartc;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -419,7 +423,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -626,7 +630,7 @@
 			interrupts = <2 0>;
 			linux,code = <KEY_POWER>;
 			debounce-interval = <100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		volume-down {
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 4d3ddc585..a8c031874 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -15,6 +15,10 @@
 		serial2 = &uartd;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	host1x@50000000 {
 		dc@54200000 {
 			rgb {
@@ -55,7 +59,7 @@
 
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
-			compatible = "stm,m41t00";
+			compatible = "st,m41t00";
 			reg = <0x68>;
 		};
 	};
@@ -84,6 +88,7 @@
 		};
 	};
 
+	/* SD/MMC */
 	sdhci@78000200 {
 		status = "okay";
 		bus-width = <4>;
@@ -126,7 +131,7 @@
 	clocks {
 		clk16m: clk@1 {
 			compatible = "fixed-clock";
-			reg=<1>;
+			reg = <1>;
 			#clock-cells = <0>;
 			clock-frequency = <16000000>;
 			clock-output-names = "clk16m";
@@ -136,12 +141,12 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index c4ed1bec4..a265534cd 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -2,8 +2,8 @@
 #include "tegra30.dtsi"
 
 /*
- * Toradex Colibri T30 Device Tree
- * Compatible for Revisions 1.1B/1.1C/1.1D
+ * Toradex Colibri T30 Module Device Tree
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
  */
 / {
 	model = "Toradex Colibri T30";
@@ -15,8 +15,8 @@
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
+			vdd-supply = <&avdd_hdmi_3v3_reg>;
+			pll-supply = <&avdd_hdmi_pll_1v8_reg>;
 
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -39,7 +39,7 @@
 
 			/* Colibri Backlight PWM<A> */
 			sdmmc3_dat3_pb4 {
-				nvidia,pins =	"sdmmc3_dat3_pb4";
+				nvidia,pins = "sdmmc3_dat3_pb4";
 				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -66,15 +66,6 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
-			/* Thermal alert, need to be disabled */
-			lcd_dc1_pd2 {
-				nvidia,pins = "lcd_dc1_pd2";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
 			/* Colibri MMC */
 			kb_row10_ps2 {
 				nvidia,pins = "kb_row10_ps2";
@@ -83,11 +74,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			kb_row11_ps3 {
-				nvidia,pins =	"kb_row11_ps3",
-						"kb_row12_ps4",
-						"kb_row13_ps5",
-						"kb_row14_ps6",
-						"kb_row15_ps7";
+				nvidia,pins = "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
 				nvidia,function = "sdmmc2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -95,17 +86,17 @@
 
 			/* Colibri SSP */
 			ulpi_clk_py0 {
-				nvidia,pins =   "ulpi_clk_py0",
-						"ulpi_dir_py1",
-						"ulpi_nxt_py2",
-						"ulpi_stp_py3";
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc3_dat6_pd3 {
-				nvidia,pins =	"sdmmc3_dat6_pd3",
-						"sdmmc3_dat7_pd4";
+				nvidia,pins = "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
 				nvidia,function = "spdif";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -113,14 +104,14 @@
 
 			/* Colibri UART_A */
 			ulpi_data0 {
-				nvidia,pins =   "ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -128,10 +119,10 @@
 
 			/* Colibri UART_B */
 			gmi_a16_pj7 {
-				nvidia,pins =   "gmi_a16_pj7",
-						"gmi_a17_pb0",
-						"gmi_a18_pb1",
-						"gmi_a19_pk7";
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
 				nvidia,function = "uartd";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -139,8 +130,8 @@
 
 			/* Colibri UART_C */
 			uart2_rxd {
-				nvidia,pins =   "uart2_rxd_pc3",
-						"uart2_txd_pc2";
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
 				nvidia,function = "uartb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -148,25 +139,59 @@
 
 			/* eMMC */
 			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_rst_n_pcc3";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
+
+			/* Power I2C (On-module) */
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_PEN_INT# */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
 		};
 	};
 
@@ -236,7 +261,7 @@
 				/*
 				 * EN_+V3.3 switching via FET:
 				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
-				 * see also v3_3 fixed supply
+				 * see also 3v3 fixed supply
 				 */
 				ldo2_reg: ldo2 {
 					regulator-name = "en_3v3";
@@ -295,6 +320,46 @@
 			};
 		};
 
+		/* STMPE811 touch screen controller */
+		stmpe811@41 {
+			compatible = "st,stmpe811";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x41>;
+			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&gpio>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				reg = <0>;
+				/* 3.25 MHz ADC clock speed */
+				st,adc-freq = <1>;
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 12-bit ADC */
+				st,mod-12b = <1>;
+				/* internal ADC reference */
+				st,ref-sel = <0>;
+				/* ADC converstion time: 80 clocks */
+				st,sample-time = <4>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+		};
+
 		/*
 		 * LM95245 temperature sensor
 		 * Note: OVERT_N directly connected to PMIC PWRDN
@@ -331,7 +396,8 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	emmc: sdhci@78000600 {
+	/* eMMC */
+	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -354,7 +420,7 @@
 
 		clk32k_in: clk@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -365,18 +431,40 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		sys_3v3_reg: regulator@100 {
+		avdd_hdmi_pll_1v8_reg: regulator@100 {
 			compatible = "regulator-fixed";
 			reg = <100>;
+			regulator-name = "+V1.8_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vio_reg>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
 			regulator-name = "3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		charge_pump_5v0_reg: regulator@101 {
+		avdd_hdmi_3v3_reg: regulator@102 {
 			compatible = "regulator-fixed";
-			reg = <101>;
+			reg = <102>;
+			regulator-name = "+V3.3_AVDD_HDMI";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		charge_pump_5v0_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
 			regulator-name = "5v0";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 782b11b2a..5030065cb 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -42,8 +42,8 @@
 			 <&tegra_car TEGRA30_CLK_CML0>;
 		clock-names = "pex", "afi", "pll_e", "cml";
 		resets = <&tegra_car 70>,
-		         <&tegra_car 72>,
-		         <&tegra_car 74>;
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
 		status = "disabled";
 
@@ -153,7 +153,7 @@
 				  &tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 			resets = <&tegra_car 24>,
-			         <&tegra_car 98>;
+				 <&tegra_car 98>;
 			reset-names = "3d", "3d2";
 		};
 
@@ -230,7 +230,7 @@
 		reg = <0x50040600 0x20>;
 		interrupt-parent = <&intc>;
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&tegra_car TEGRA30_CLK_TWD>;
 	};
 
@@ -329,9 +329,9 @@
 		#dma-cells = <1>;
 	};
 
-	ahb: ahb@6000c004 {
+	ahb: ahb@6000c000 {
 		compatible = "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
+		reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
 	};
 
 	gpio: gpio@6000d000 {
@@ -349,6 +349,9 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 248>;
+		*/
 	};
 
 	apbmisc@70000800 {
@@ -368,7 +371,7 @@
 	 * driver and APB DMA based serial driver for higher baudrate
 	 * and performace. To enable the 8250 based driver, the compatible
 	 * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
-	 * the APB DMA based serial driver, the comptible is
+	 * the APB DMA based serial driver, the compatible is
 	 * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
 	 */
 	uarta: serial@70006000 {
@@ -454,7 +457,7 @@
 	};
 
 	i2c@7000c000 {
-		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000c000 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -659,7 +662,7 @@
 		reg = <0x70030000 0x10000>;
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_HDA>,
-		         <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA30_CLK_HDA2HDMI>,
 			 <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
 		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
 		resets = <&tegra_car 125>, /* hda */
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
index ce7138c3a..f9dc463b9 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -16,15 +16,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index 304329634..9161cd988 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -99,7 +90,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi
index 3537ae5b2..5288e6dff 100644
--- a/arch/arm/boot/dts/twl4030_omap3.dtsi
+++ b/arch/arm/boot/dts/twl4030_omap3.dtsi
@@ -19,7 +19,7 @@
 	 */
 	twl4030_pins: pinmux_twl4030_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 55eb35f06..c45f97f37 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -99,4 +99,10 @@
 		compatible = "ti,twl6030-pwmled";
 		#pwm-cells = <2>;
 	};
+
+	gpadc {
+		compatible = "ti,twl6030-gpadc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
 };
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
index a4fa5703c..e373f59ce 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -24,7 +24,7 @@
 &omap4_pmx_wkup {
 	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
 		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+			OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
 		>;
 	};
 };
@@ -32,7 +32,7 @@
 &omap4_pmx_core {
 	twl6030_pins: pinmux_twl6030_pins {
 		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi
new file mode 100644
index 000000000..03f60ec34
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-common32.dtsi
@@ -0,0 +1,150 @@
+/*
+ * Device Tree Source commonly used by UniPhier ARM SoCs
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	clocks {
+		refclk: ref {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&uart_clk>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&uart_clk>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&uart_clk>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&uart_clk>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				 /* specify compatible in each SoC DTSI */
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
index 200b0c99e..ec94b7a66 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
@@ -44,6 +44,7 @@
 
 /dts-v1/;
 /include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
@@ -56,24 +57,45 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = "serial0:115200n8";
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
 	};
 };
 
-&extbus {
-	ranges = <0 0x00000000 0x0f000000 0x01000000
-		  1 0x00000000 0x00000000 0x08000000>;
+&ethsc {
+	interrupts = <0 49 4>;
 };
 
-&support_card {
-	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+&serial0 {
+	status = "okay";
 };
 
-&serialsc {
-	interrupts = <0 49 4>;
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index 6a34c56e4..debad7ffe 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
 
 / {
 	compatible = "socionext,ph1-ld4";
@@ -55,6 +55,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 	};
 
@@ -64,47 +65,122 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-	};
 
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <36864000>;
 		};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
+		iobus_clk: iobus_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
 		};
+	};
+};
 
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>;
+		cache-unified;
+		cache-size = <(512 * 1024)>;
+		cache-sets = <256>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+	};
 
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
+	i2c0: i2c@58400000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58400000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
 
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-		};
+	i2c1: i2c@58480000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58480000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
+
+	/* chip-internal connection for DMD */
+	i2c2: i2c@58500000 {
+		compatible = "socionext,uniphier-i2c";
+		reg = <0x58500000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 43 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <400000>;
+	};
+
+	i2c3: i2c@58580000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58580000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
+
+	usb0: usb@5a800100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a800100 0x100>;
+		interrupts = <0 80 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0>;
+	};
+
+	usb1: usb@5a810100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a810100 0x100>;
+		interrupts = <0 81 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
 	};
+
+	usb2: usb@5a820100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a820100 0x100>;
+		interrupts = <0 82 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb2>;
+	};
+
+};
+
+&refclk {
+	clock-frequency = <24576000>;
+};
+
+&serial3 {
+	interrupts = <0 29 4>;
+};
+
+&pinctrl {
+	compatible = "socionext,uniphier-ld4-pinctrl";
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
new file mode 100644
index 000000000..b8134c6e0
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
@@ -0,0 +1,95 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD6b Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld6b.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-LD6b Reference Board";
+	compatible = "socionext,ph1-ld6b-ref", "socionext,ph1-ld6b";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&ethsc {
+	interrupts = <0 52 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
new file mode 100644
index 000000000..19c107c66
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD6b SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * PH1-LD6b consists of two silicon dies: D-chip and A-chip.
+ * The D-chip (digital chip) is the same as the ProXstream2 die.
+ * Reuse the ProXstream2 device tree with some properties overridden.
+ */
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+	compatible = "socionext,ph1-ld6b";
+};
+
+/* UART3 unavailable: the pads are not wired to the package balls */
+&serial3 {
+	status = "disabled";
+};
+
+/*
+ * PH1-LD6b and ProXstream2 have completely different packages,
+ * which makes the pinctrl driver unshareable.
+ */
+&pinctrl {
+	compatible = "socionext,uniphier-ld6b-pinctrl";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts
new file mode 100644
index 000000000..d34358632
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts
@@ -0,0 +1,113 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Ace Board
+ *
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+
+/ {
+	model = "UniPhier PH1-Pro4 Ace Board";
+	compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
index d891135a7..95f631a3d 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
@@ -44,6 +44,7 @@
 
 /dts-v1/;
 /include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
@@ -56,24 +57,47 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = "serial0:115200n8";
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
 	};
 };
 
-&extbus {
-	ranges = <0 0x00000000 0x0f000000 0x01000000
-		  1 0x00000000 0x00000000 0x08000000>;
+&ethsc {
+	interrupts = <0 50 4>;
 };
 
-&support_card {
-	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+&serial0 {
+	status = "okay";
 };
 
-&serialsc {
-	interrupts = <0 50 4>;
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts
new file mode 100644
index 000000000..7c3a1fcc9
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts
@@ -0,0 +1,108 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Sanji Board
+ *
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+
+/ {
+	model = "UniPhier PH1-Pro4 Sanji Board";
+	compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index dc633603a..7b9da0852 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
 
 / {
 	compatible = "socionext,ph1-pro4";
@@ -56,12 +56,14 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			next-level-cache = <&l2>;
 		};
 	};
 
@@ -71,47 +73,132 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-	};
 
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <73728000>;
 		};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
+		i2c_clk: i2c_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
 		};
+	};
+};
 
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x304>;
-			clocks = <&arm_timer_clk>;
-		};
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>;
+		cache-unified;
+		cache-size = <(768 * 1024)>;
+		cache-sets = <256>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+	};
 
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x304>;
-			clocks = <&arm_timer_clk>;
-		};
+	i2c0: i2c@58780000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58780000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-		};
+	i2c1: i2c@58781000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58781000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	i2c2: i2c@58782000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58782000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 43 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
 	};
+
+	i2c3: i2c@58783000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58783000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	/* i2c4 does not exist */
+
+	/* chip-internal connection for DMD */
+	i2c5: i2c@58785000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58785000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 25 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
+
+	/* chip-internal connection for HDMI */
+	i2c6: i2c@58786000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58786000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 26 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
+
+	usb2: usb@5a800100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a800100 0x100>;
+		interrupts = <0 80 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb2>;
+	};
+
+	usb3: usb@5a810100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a810100 0x100>;
+		interrupts = <0 81 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3>;
+	};
+};
+
+&refclk {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	compatible = "socionext,uniphier-pro4-pinctrl";
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
new file mode 100644
index 000000000..7e4aa2fde
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
@@ -0,0 +1,198 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro5 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "uniphier-common32.dtsi"
+
+/ {
+	compatible = "socionext,ph1-pro5";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <73728000>;
+		};
+
+		i2c_clk: i2c_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+};
+
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
+		interrupts = <0 190 4>, <0 191 4>;
+		cache-unified;
+		cache-size = <(2 * 1024 * 1024)>;
+		cache-sets = <512>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+		next-level-cache = <&l3>;
+	};
+
+	l3: l3-cache@500c8000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>;
+		cache-unified;
+		cache-size = <(2 * 1024 * 1024)>;
+		cache-sets = <512>;
+		cache-line-size = <256>;
+		cache-level = <3>;
+	};
+
+	i2c0: i2c@58780000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58780000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	i2c1: i2c@58781000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58781000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	i2c2: i2c@58782000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58782000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 43 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	i2c3: i2c@58783000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58783000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	/* i2c4 does not exist */
+
+	/* chip-internal connection for DMD */
+	i2c5: i2c@58785000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58785000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 25 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
+
+	/* chip-internal connection for HDMI */
+	i2c6: i2c@58786000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58786000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 26 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
+};
+
+&refclk {
+	clock-frequency = <20000000>;
+};
+
+&pinctrl {
+	compatible = "socionext,uniphier-pro5-pinctrl";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
index 3ea64ae00..acb420492 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
@@ -44,6 +44,7 @@
 
 /dts-v1/;
 /include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
@@ -57,24 +58,53 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = "serial0:115200n8";
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
 	};
 };
 
-&extbus {
-	ranges = <0 0x00000000 0x0f000000 0x01000000
-		  1 0x00000000 0x00000000 0x08000000>;
+&ethsc {
+	interrupts = <0 49 4>;
 };
 
-&support_card {
-	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+&serial0 {
+	status = "okay";
 };
 
-&serialsc {
-	interrupts = <0 49 4>;
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
index 248b18868..03292f443 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -56,21 +56,41 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			next-level-cache = <&l2>;
 		};
 	};
 
 	clocks {
+		refclk: ref {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24576000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <36864000>;
+		};
+
+		iobus_clk: iobus_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
 	};
 
 	soc {
@@ -80,12 +100,6 @@
 		ranges;
 		interrupt-parent = <&intc>;
 
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-		};
-
 		timer@20000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20000200 0x20>;
@@ -108,10 +122,139 @@
 			      <0x20000100 0x100>;
 		};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(512 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			clocks = <&uart_clk>;
+			fifo-size = <64>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c4: i2c@58600000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58600000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 1>;
+			clocks = <&iobus_clk>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+		};
+
+		usb3: usb@5a830100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a830100 0x100>;
+			interrupts = <0 83 4>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
index dcdc4f743..d594f40e7 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
@@ -44,6 +44,7 @@
 
 /dts-v1/;
 /include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
@@ -56,24 +57,49 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serialsc;
+		stdout-path = "serial0:115200n8";
 	};
 
 	aliases {
-		serial0 = &serialsc;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
 	};
 };
 
-&extbus {
-	ranges = <0 0x00000000 0x0f000000 0x01000000
-		  1 0x00000000 0x00000000 0x08000000>;
+&ethsc {
+	interrupts = <0 48 4>;
 };
 
-&support_card {
-	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+&serial0 {
+	status = "okay";
 };
 
-&serialsc {
-	interrupts = <0 48 4>;
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index baa71e1fe..467f9d8e9 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
 
 / {
 	compatible = "socionext,ph1-sld8";
@@ -55,6 +55,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 	};
 
@@ -64,47 +65,121 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-	};
 
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <80000000>;
 		};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
+		iobus_clk: iobus_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
 		};
+	};
+};
 
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>;
+		cache-unified;
+		cache-size = <(256 * 1024)>;
+		cache-sets = <256>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+	};
 
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
+	i2c0: i2c@58400000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58400000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
 
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-		};
+	i2c1: i2c@58480000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58480000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
 	};
+
+	/* chip-internal connection for DMD */
+	i2c2: i2c@58500000 {
+		compatible = "socionext,uniphier-i2c";
+		reg = <0x58500000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 43 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <400000>;
+	};
+
+	i2c3: i2c@58580000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58580000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
+
+	usb0: usb@5a800100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a800100 0x100>;
+		interrupts = <0 80 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0>;
+	};
+
+	usb1: usb@5a810100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a810100 0x100>;
+		interrupts = <0 81 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
+	};
+
+	usb2: usb@5a820100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a820100 0x100>;
+		interrupts = <0 82 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb2>;
+	};
+};
+
+&refclk {
+	clock-frequency = <25000000>;
+};
+
+&serial3 {
+	interrupts = <0 29 4>;
+};
+
+&pinctrl {
+	compatible = "socionext,uniphier-sld8-pinctrl";
 };
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
new file mode 100644
index 000000000..10a711041
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -0,0 +1,125 @@
+/*
+ * Device Tree Source for UniPhier SoCs default pinctrl settings
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&pinctrl {
+	pinctrl_i2c0: i2c0_grp {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	pinctrl_i2c1: i2c1_grp {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	pinctrl_i2c2: i2c2_grp {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	pinctrl_i2c3: i2c3_grp {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+
+	pinctrl_i2c4: i2c4_grp {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	pinctrl_nand: nand_grp {
+		groups = "nand";
+		function = "nand";
+	};
+
+	pinctrl_nand2cs: nand2cs_grp {
+		groups = "nand", "nand_cs1";
+		function = "nand";
+	};
+
+	pinctrl_system_bus: system_bus_grp {
+		groups = "system_bus", "system_bus_cs1";
+		function = "system_bus";
+	};
+
+	pinctrl_uart0: uart0_grp {
+		groups = "uart0";
+		function = "uart0";
+	};
+
+	pinctrl_uart1: uart1_grp {
+		groups = "uart1";
+		function = "uart1";
+	};
+
+	pinctrl_uart2: uart2_grp {
+		groups = "uart2";
+		function = "uart2";
+	};
+
+	pinctrl_uart3: uart3_grp {
+		groups = "uart3";
+		function = "uart3";
+	};
+
+	pinctrl_usb0: usb0_grp {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	pinctrl_usb1: usb1_grp {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	pinctrl_usb2: usb2_grp {
+		groups = "usb2";
+		function = "usb2";
+	};
+
+	pinctrl_usb3: usb3_grp {
+		groups = "usb3";
+		function = "usb3";
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts
new file mode 100644
index 000000000..98d895b7a
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts
@@ -0,0 +1,88 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 Gentil Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+	model = "UniPhier ProXstream2 Gentil Board";
+	compatible = "socionext,proxstream2-gentil", "socionext,proxstream2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial2;
+		serial1 = &serial0;
+		serial2 = &serial1;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
new file mode 100644
index 000000000..1fb8bd7bb
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
@@ -0,0 +1,78 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 Vodka Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+	model = "UniPhier ProXstream2 Vodka Board";
+	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial2;
+		serial1 = &serial0;
+		serial2 = &serial1;
+		i2c0 = &i2c0;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
new file mode 100644
index 000000000..d00d6f5c2
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
@@ -0,0 +1,209 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "uniphier-common32.dtsi"
+
+/ {
+	compatible = "socionext,proxstream2";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <88900000>;
+		};
+
+		i2c_clk: i2c_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+};
+
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+		cache-unified;
+		cache-size = <(1280 * 1024)>;
+		cache-sets = <512>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+	};
+
+	i2c0: i2c@58780000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58780000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	i2c1: i2c@58781000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58781000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	i2c2: i2c@58782000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58782000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		interrupts = <0 43 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	i2c3: i2c@58783000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58783000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
+
+	/* chip-internal connection for DMD */
+	i2c4: i2c@58784000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58784000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 45 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
+
+	/* chip-internal connection for STM */
+	i2c5: i2c@58785000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58785000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 25 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
+
+	/* chip-internal connection for HDMI */
+	i2c6: i2c@58786000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58786000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 26 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
+};
+
+&refclk {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	compatible = "socionext,uniphier-pxs2-pinctrl";
+};
diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
new file mode 100644
index 000000000..f7df0881c
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Device Tree Source for UniPhier Reference Daughter Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "microchip,24lc128";
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
index da271e3b9..51ecc9b9c 100644
--- a/arch/arm/boot/dts/uniphier-support-card.dtsi
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -42,11 +42,15 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-&extbus {
+&system_bus {
+	status = "okay";
+	ranges = <1 0x00000000 0x42000000 0x02000000>;
+
 	support_card: support_card {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		ranges = <0x00000000 1 0x01f00000 0x00100000>;
 
 		ethsc: ethernet@00000000 {
 			compatible = "smsc,lan9118", "smsc,lan9115";
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 12edafefd..7514b347c 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -8,15 +8,6 @@
 
 / {
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -90,7 +81,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -115,11 +106,11 @@
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 68c0de36c..bfc48a272 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -143,11 +134,11 @@
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi
index 0b3b36182..088c2c368 100644
--- a/arch/arm/boot/dts/usb_a9g20_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi
@@ -11,14 +11,15 @@
 
 / {
 	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
 		reg = <0x20000000 0x4000000>;
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		rv3029c2@56 {
 			compatible = "rv3029c2";
 			reg = <0x56>;
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 01f40197e..409e069b3 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -30,9 +30,69 @@
 	};
 
 	core-module@10000000 {
-		compatible = "arm,core-module-versatile", "syscon";
+		compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
 
+		led@08.0 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x01>;
+			label = "versatile:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+		led@08.1 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x02>;
+			label = "versatile:1";
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+		led@08.2 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x04>;
+			label = "versatile:2";
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+		led@08.3 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x08>;
+			label = "versatile:3";
+			default-state = "off";
+		};
+		led@08.4 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x10>;
+			label = "versatile:4";
+			default-state = "off";
+		};
+		led@08.5 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x20>;
+			label = "versatile:5";
+			default-state = "off";
+		};
+		led@08.6 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x40>;
+			label = "versatile:6";
+			default-state = "off";
+		};
+		led@08.7 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x80>;
+			label = "versatile:7";
+			default-state = "off";
+		};
+
 		/* OSC1 on AB, OSC4 on PB */
 		osc1: cm_aux_osc@24M {
 			#clock-cells = <0>;
@@ -59,8 +119,9 @@
 	};
 
 	flash@34000000 {
-		compatible = "arm,versatile-flash";
-		reg = <0x34000000 0x4000000>;
+		/* 64 MiB NOR flash in non-interleaved chips */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x34000000 0x04000000>;
 		bank-width = <4>;
 	};
 
@@ -88,7 +149,7 @@
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -110,7 +171,11 @@
 			interrupt-parent = <&vic>;
 			interrupts = <31>; /* Cascaded to vic */
 			clear-mask = <0xffffffff>;
-			valid-mask = <0xffc203f8>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * table 4-36 page 4-50 of ARM DUI 0225D
+			 */
+			valid-mask = <0x0760031b>;
 		};
 
 		dma@10130000 {
@@ -266,8 +331,8 @@
 			};
 			mmc@5000 {
 				compatible = "arm,pl180", "arm,primecell";
-				reg = < 0x5000 0x1000>;
-				interrupts-extended = <&vic 22 &sic 2>;
+				reg = <0x5000 0x1000>;
+				interrupts-extended = <&vic 22 &sic 1>;
 				clocks = <&xtal24mhz>, <&pclk>;
 				clock-names = "mclk", "apb_pclk";
 			};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index b83137f66..33a8eb283 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -5,6 +5,16 @@
 	compatible = "arm,versatile-pb";
 
 	amba {
+		/* The Versatile PB is using more SIC IRQ lines than the AB */
+		sic: intc@10003000 {
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * figure 3-30 page 3-74 of ARM DUI 0224B
+			 */
+			valid-mask = <0x7fe003ff>;
+		};
+
 		gpio2: gpio@101e6000 {
 			compatible = "arm,pl061", "arm,primecell";
 			reg = <0x101e6000 0x1000>;
@@ -67,6 +77,13 @@
 		};
 
 		fpga {
+			mmc@5000 {
+				/*
+				 * Overrides the interrupt assignment from
+				 * the Versatile AB board file.
+				 */
+				interrupts-extended = <&sic 22 &sic 23>;
+			};
 			uart@9000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x9000 0x1000>;
@@ -86,7 +103,8 @@
 			mmc@b000 {
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts-extended = <&vic 23 &sic 2>;
+				interrupt-parent = <&sic>;
+				interrupts = <1>, <2>;
 				clocks = <&xtal24mhz>, <&pclk>;
 				clock-names = "mclk", "apb_pclk";
 			};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 2efb2058b..3086efacd 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -66,7 +66,7 @@
 		};
 
 		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 3 0 0x200000>;
@@ -75,19 +75,19 @@
 				compatible = "arm,vexpress-sysreg";
 				reg = <0x010000 0x1000>;
 
-				v2m_led_gpios: sys_led@08 {
+				v2m_led_gpios: sys_led {
 					compatible = "arm,vexpress-sysreg,sys_led";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				v2m_mmc_gpios: sys_mci@48 {
+				v2m_mmc_gpios: sys_mci {
 					compatible = "arm,vexpress-sysreg,sys_mci";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				v2m_flash_gpios: sys_flash@4c {
+				v2m_flash_gpios: sys_flash {
 					compatible = "arm,vexpress-sysreg,sys_flash";
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -101,6 +101,8 @@
 				clock-names = "refclk", "timclk", "apb_pclk";
 				#clock-cells = <1>;
 				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
 			};
 
 			/* PCI-E I2C bus */
@@ -284,7 +286,7 @@
 			};
 		};
 
-		v2m_fixed_3v3: fixedregulator@0 {
+		v2m_fixed_3v3: fixed-regulator-0 {
 			compatible = "regulator-fixed";
 			regulator-name = "3V3";
 			regulator-min-microvolt = <3300000>;
@@ -316,49 +318,49 @@
 		leds {
 			compatible = "gpio-leds";
 
-			user@1 {
+			user1 {
 				label = "v2m:green:user1";
 				gpios = <&v2m_led_gpios 0 0>;
 				linux,default-trigger = "heartbeat";
 			};
 
-			user@2 {
+			user2 {
 				label = "v2m:green:user2";
 				gpios = <&v2m_led_gpios 1 0>;
 				linux,default-trigger = "mmc0";
 			};
 
-			user@3 {
+			user3 {
 				label = "v2m:green:user3";
 				gpios = <&v2m_led_gpios 2 0>;
 				linux,default-trigger = "cpu0";
 			};
 
-			user@4 {
+			user4 {
 				label = "v2m:green:user4";
 				gpios = <&v2m_led_gpios 3 0>;
 				linux,default-trigger = "cpu1";
 			};
 
-			user@5 {
+			user5 {
 				label = "v2m:green:user5";
 				gpios = <&v2m_led_gpios 4 0>;
 				linux,default-trigger = "cpu2";
 			};
 
-			user@6 {
+			user6 {
 				label = "v2m:green:user6";
 				gpios = <&v2m_led_gpios 5 0>;
 				linux,default-trigger = "cpu3";
 			};
 
-			user@7 {
+			user7 {
 				label = "v2m:green:user7";
 				gpios = <&v2m_led_gpios 6 0>;
 				linux,default-trigger = "cpu4";
 			};
 
-			user@8 {
+			user8 {
 				label = "v2m:green:user8";
 				gpios = <&v2m_led_gpios 7 0>;
 				linux,default-trigger = "cpu5";
@@ -369,7 +371,7 @@
 			compatible = "arm,vexpress,config-bus";
 			arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-			osc@0 {
+			oscclk0 {
 				/* MCC static memory clock */
 				compatible = "arm,vexpress-osc";
 				arm,vexpress-sysreg,func = <1 0>;
@@ -378,7 +380,7 @@
 				clock-output-names = "v2m:oscclk0";
 			};
 
-			v2m_oscclk1: osc@1 {
+			v2m_oscclk1: oscclk1 {
 				/* CLCD clock */
 				compatible = "arm,vexpress-osc";
 				arm,vexpress-sysreg,func = <1 1>;
@@ -387,7 +389,7 @@
 				clock-output-names = "v2m:oscclk1";
 			};
 
-			v2m_oscclk2: osc@2 {
+			v2m_oscclk2: oscclk2 {
 				/* IO FPGA peripheral clock */
 				compatible = "arm,vexpress-osc";
 				arm,vexpress-sysreg,func = <1 2>;
@@ -396,7 +398,7 @@
 				clock-output-names = "v2m:oscclk2";
 			};
 
-			volt@0 {
+			volt-vio {
 				/* Logic level voltage */
 				compatible = "arm,vexpress-volt";
 				arm,vexpress-sysreg,func = <2 0>;
@@ -405,34 +407,34 @@
 				label = "VIO";
 			};
 
-			temp@0 {
+			temp-mcc {
 				/* MCC internal operating temperature */
 				compatible = "arm,vexpress-temp";
 				arm,vexpress-sysreg,func = <4 0>;
 				label = "MCC";
 			};
 
-			reset@0 {
+			reset {
 				compatible = "arm,vexpress-reset";
 				arm,vexpress-sysreg,func = <5 0>;
 			};
 
-			muxfpga@0 {
+			muxfpga {
 				compatible = "arm,vexpress-muxfpga";
 				arm,vexpress-sysreg,func = <7 0>;
 			};
 
-			shutdown@0 {
+			shutdown {
 				compatible = "arm,vexpress-shutdown";
 				arm,vexpress-sysreg,func = <8 0>;
 			};
 
-			reboot@0 {
+			reboot {
 				compatible = "arm,vexpress-reboot";
 				arm,vexpress-sysreg,func = <9 0>;
 			};
 
-			dvimode@0 {
+			dvimode {
 				compatible = "arm,vexpress-dvimode";
 				arm,vexpress-sysreg,func = <11 0>;
 			};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index cb3090f91..c6393d3f1 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -65,7 +65,7 @@
 		};
 
 		iofpga@7,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 7 0 0x20000>;
@@ -74,19 +74,19 @@
 				compatible = "arm,vexpress-sysreg";
 				reg = <0x00000 0x1000>;
 
-				v2m_led_gpios: sys_led@08 {
+				v2m_led_gpios: sys_led {
 					compatible = "arm,vexpress-sysreg,sys_led";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				v2m_mmc_gpios: sys_mci@48 {
+				v2m_mmc_gpios: sys_mci {
 					compatible = "arm,vexpress-sysreg,sys_mci";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				v2m_flash_gpios: sys_flash@4c {
+				v2m_flash_gpios: sys_flash {
 					compatible = "arm,vexpress-sysreg,sys_flash";
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -100,6 +100,8 @@
 				clock-names = "refclk", "timclk", "apb_pclk";
 				#clock-cells = <1>;
 				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
 			};
 
 			/* PCI-E I2C bus */
@@ -283,7 +285,7 @@
 			};
 		};
 
-		v2m_fixed_3v3: fixedregulator@0 {
+		v2m_fixed_3v3: fixed-regulator-0 {
 			compatible = "regulator-fixed";
 			regulator-name = "3V3";
 			regulator-min-microvolt = <3300000>;
@@ -315,49 +317,49 @@
 		leds {
 			compatible = "gpio-leds";
 
-			user@1 {
+			user1 {
 				label = "v2m:green:user1";
 				gpios = <&v2m_led_gpios 0 0>;
 				linux,default-trigger = "heartbeat";
 			};
 
-			user@2 {
+			user2 {
 				label = "v2m:green:user2";
 				gpios = <&v2m_led_gpios 1 0>;
 				linux,default-trigger = "mmc0";
 			};
 
-			user@3 {
+			user3 {
 				label = "v2m:green:user3";
 				gpios = <&v2m_led_gpios 2 0>;
 				linux,default-trigger = "cpu0";
 			};
 
-			user@4 {
+			user4 {
 				label = "v2m:green:user4";
 				gpios = <&v2m_led_gpios 3 0>;
 				linux,default-trigger = "cpu1";
 			};
 
-			user@5 {
+			user5 {
 				label = "v2m:green:user5";
 				gpios = <&v2m_led_gpios 4 0>;
 				linux,default-trigger = "cpu2";
 			};
 
-			user@6 {
+			user6 {
 				label = "v2m:green:user6";
 				gpios = <&v2m_led_gpios 5 0>;
 				linux,default-trigger = "cpu3";
 			};
 
-			user@7 {
+			user7 {
 				label = "v2m:green:user7";
 				gpios = <&v2m_led_gpios 6 0>;
 				linux,default-trigger = "cpu4";
 			};
 
-			user@8 {
+			user8 {
 				label = "v2m:green:user8";
 				gpios = <&v2m_led_gpios 7 0>;
 				linux,default-trigger = "cpu5";
@@ -368,7 +370,7 @@
 			compatible = "arm,vexpress,config-bus";
 			arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-			osc@0 {
+			oscclk0 {
 				/* MCC static memory clock */
 				compatible = "arm,vexpress-osc";
 				arm,vexpress-sysreg,func = <1 0>;
@@ -377,7 +379,7 @@
 				clock-output-names = "v2m:oscclk0";
 			};
 
-			v2m_oscclk1: osc@1 {
+			v2m_oscclk1: oscclk1 {
 				/* CLCD clock */
 				compatible = "arm,vexpress-osc";
 				arm,vexpress-sysreg,func = <1 1>;
@@ -386,7 +388,7 @@
 				clock-output-names = "v2m:oscclk1";
 			};
 
-			v2m_oscclk2: osc@2 {
+			v2m_oscclk2: oscclk2 {
 				/* IO FPGA peripheral clock */
 				compatible = "arm,vexpress-osc";
 				arm,vexpress-sysreg,func = <1 2>;
@@ -395,7 +397,7 @@
 				clock-output-names = "v2m:oscclk2";
 			};
 
-			volt@0 {
+			volt-vio {
 				/* Logic level voltage */
 				compatible = "arm,vexpress-volt";
 				arm,vexpress-sysreg,func = <2 0>;
@@ -404,34 +406,34 @@
 				label = "VIO";
 			};
 
-			temp@0 {
+			temp-mcc {
 				/* MCC internal operating temperature */
 				compatible = "arm,vexpress-temp";
 				arm,vexpress-sysreg,func = <4 0>;
 				label = "MCC";
 			};
 
-			reset@0 {
+			reset {
 				compatible = "arm,vexpress-reset";
 				arm,vexpress-sysreg,func = <5 0>;
 			};
 
-			muxfpga@0 {
+			muxfpga {
 				compatible = "arm,vexpress-muxfpga";
 				arm,vexpress-sysreg,func = <7 0>;
 			};
 
-			shutdown@0 {
+			shutdown {
 				compatible = "arm,vexpress-shutdown";
 				arm,vexpress-sysreg,func = <8 0>;
 			};
 
-			reboot@0 {
+			reboot {
 				compatible = "arm,vexpress-reboot";
 				arm,vexpress-sysreg,func = <9 0>;
 			};
 
-			dvimode@0 {
+			dvimode {
 				compatible = "arm,vexpress-dvimode";
 				arm,vexpress-sysreg,func = <11 0>;
 			};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 9420053ac..102838fcc 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -55,14 +55,14 @@
 		compatible = "arm,hdlcd";
 		reg = <0 0x2b000000 0 0x1000>;
 		interrupts = <0 85 4>;
-		clocks = <&oscclk5>;
+		clocks = <&hdlcd_clk>;
 		clock-names = "pxlclk";
 	};
 
 	memory-controller@2b0a0000 {
 		compatible = "arm,pl341", "arm,primecell";
 		reg = <0 0x2b0a0000 0 0x1000>;
-		clocks = <&oscclk7>;
+		clocks = <&sys_pll>;
 		clock-names = "apb_pclk";
 	};
 
@@ -71,7 +71,7 @@
 		status = "disabled";
 		reg = <0 0x2b060000 0 0x1000>;
 		interrupts = <0 98 4>;
-		clocks = <&oscclk7>;
+		clocks = <&sys_pll>;
 		clock-names = "apb_pclk";
 	};
 
@@ -92,7 +92,7 @@
 		reg = <0 0x7ffd0000 0 0x1000>;
 		interrupts = <0 86 4>,
 			     <0 87 4>;
-		clocks = <&oscclk7>;
+		clocks = <&sys_pll>;
 		clock-names = "apb_pclk";
 	};
 
@@ -104,7 +104,7 @@
 			     <0 89 4>,
 			     <0 90 4>,
 			     <0 91 4>;
-		clocks = <&oscclk7>;
+		clocks = <&sys_pll>;
 		clock-names = "apb_pclk";
 	};
 
@@ -126,7 +126,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		osc@0 {
+		oscclk0 {
 			/* CPU PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -135,7 +135,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		osc@4 {
+		oscclk4 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -144,7 +144,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		oscclk5: osc@5 {
+		hdlcd_clk: oscclk5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -153,7 +153,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: osc@6 {
+		smbclk: oscclk6 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -162,7 +162,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		oscclk7: osc@7 {
+		sys_pll: oscclk7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -171,7 +171,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		osc@8 {
+		oscclk8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -180,7 +180,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt@0 {
+		volt-cores {
 			/* CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -191,28 +191,28 @@
 			label = "Cores";
 		};
 
-		amp@0 {
+		amp-cores {
 			/* Total current for the two cores */
 			compatible = "arm,vexpress-amp";
 			arm,vexpress-sysreg,func = <3 0>;
 			label = "Cores";
 		};
 
-		temp@0 {
+		temp-dcc {
 			/* DCC internal temperature */
 			compatible = "arm,vexpress-temp";
 			arm,vexpress-sysreg,func = <4 0>;
 			label = "DCC";
 		};
 
-		power@0 {
+		power-cores {
 			/* Total power */
 			compatible = "arm,vexpress-power";
 			arm,vexpress-sysreg,func = <12 0>;
 			label = "Cores";
 		};
 
-		energy@0 {
+		energy {
 			/* Total energy */
 			compatible = "arm,vexpress-energy";
 			arm,vexpress-sysreg,func = <13 0>;
@@ -220,7 +220,7 @@
 		};
 	};
 
-	smb {
+	smb@08000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -280,4 +280,17 @@
 
 		/include/ "vexpress-v2m-rs1.dtsi"
 	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
 };
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 17f63f7df..0205c97ef 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -109,7 +109,7 @@
 		compatible = "arm,hdlcd";
 		reg = <0 0x2b000000 0 0x1000>;
 		interrupts = <0 85 4>;
-		clocks = <&oscclk5>;
+		clocks = <&hdlcd_clk>;
 		clock-names = "pxlclk";
 	};
 
@@ -227,7 +227,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		osc@0 {
+		oscclk0 {
 			/* A15 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -236,7 +236,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		osc@1 {
+		oscclk1 {
 			/* A15 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -245,7 +245,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		osc@2 {
+		oscclk2 {
 			/* A7 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -254,7 +254,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		osc@3 {
+		oscclk3 {
 			/* A7 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -263,7 +263,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		osc@4 {
+		oscclk4 {
 			/* External AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -272,7 +272,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		oscclk5: osc@5 {
+		hdlcd_clk: oscclk5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -281,7 +281,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: osc@6 {
+		smbclk: oscclk6 {
 			/* Static memory controller clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -290,7 +290,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		osc@7 {
+		oscclk7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -299,7 +299,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		osc@8 {
+		oscclk8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -308,7 +308,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt@0 {
+		volt-a15 {
 			/* A15 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -319,7 +319,7 @@
 			label = "A15 Vcore";
 		};
 
-		volt@1 {
+		volt-a7 {
 			/* A7 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
@@ -330,49 +330,49 @@
 			label = "A7 Vcore";
 		};
 
-		amp@0 {
+		amp-a15 {
 			/* Total current for the two A15 cores */
 			compatible = "arm,vexpress-amp";
 			arm,vexpress-sysreg,func = <3 0>;
 			label = "A15 Icore";
 		};
 
-		amp@1 {
+		amp-a7 {
 			/* Total current for the three A7 cores */
 			compatible = "arm,vexpress-amp";
 			arm,vexpress-sysreg,func = <3 1>;
 			label = "A7 Icore";
 		};
 
-		temp@0 {
+		temp-dcc {
 			/* DCC internal temperature */
 			compatible = "arm,vexpress-temp";
 			arm,vexpress-sysreg,func = <4 0>;
 			label = "DCC";
 		};
 
-		power@0 {
+		power-a15 {
 			/* Total power for the two A15 cores */
 			compatible = "arm,vexpress-power";
 			arm,vexpress-sysreg,func = <12 0>;
 			label = "A15 Pcore";
 		};
 
-		power@1 {
+		power-a7 {
 			/* Total power for the three A7 cores */
 			compatible = "arm,vexpress-power";
 			arm,vexpress-sysreg,func = <12 1>;
 			label = "A7 Pcore";
 		};
 
-		energy@0 {
+		energy-a15 {
 			/* Total energy for the two A15 cores */
 			compatible = "arm,vexpress-energy";
 			arm,vexpress-sysreg,func = <13 0>, <13 1>;
 			label = "A15 Jcore";
 		};
 
-		energy@2 {
+		energy-a7 {
 			/* Total energy for the three A7 cores */
 			compatible = "arm,vexpress-energy";
 			arm,vexpress-sysreg,func = <13 2>, <13 3>;
@@ -387,7 +387,7 @@
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
 		port {
-			etb_in_port: endpoint@0 {
+			etb_in_port: endpoint {
 				slave-mode;
 				remote-endpoint = <&replicator_out_port0>;
 			};
@@ -401,7 +401,7 @@
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
 		port {
-			tpiu_in_port: endpoint@0 {
+			tpiu_in_port: endpoint {
 				slave-mode;
 				remote-endpoint = <&replicator_out_port1>;
 			};
@@ -578,7 +578,7 @@
 		};
 	};
 
-	smb {
+	smb@08000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -638,4 +638,17 @@
 
 		/include/ "vexpress-v2m-rs1.dtsi"
 	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
 };
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index d2709b733..1acecaf4b 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -57,14 +57,14 @@
 		compatible = "arm,hdlcd";
 		reg = <0x2a110000 0x1000>;
 		interrupts = <0 85 4>;
-		clocks = <&oscclk3>;
+		clocks = <&hdlcd_clk>;
 		clock-names = "pxlclk";
 	};
 
 	memory-controller@2a150000 {
 		compatible = "arm,pl341", "arm,primecell";
 		reg = <0x2a150000 0x1000>;
-		clocks = <&oscclk1>;
+		clocks = <&axi_clk>;
 		clock-names = "apb_pclk";
 	};
 
@@ -73,7 +73,7 @@
 		reg = <0x2a190000 0x1000>;
 		interrupts = <0 86 4>,
 			     <0 87 4>;
-		clocks = <&oscclk1>;
+		clocks = <&axi_clk>;
 		clock-names = "apb_pclk";
 	};
 
@@ -93,7 +93,7 @@
 		             "arm,cortex-a9-global-timer";
 		reg = <0x2c000200 0x20>;
 		interrupts = <1 11 0x304>;
-		clocks = <&oscclk0>;
+		clocks = <&cpu_clk>;
 	};
 
 	watchdog@2c000620 {
@@ -128,7 +128,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0: osc@0 {
+		cpu_clk: oscclk0 {
 			/* CPU and internal AXI reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -137,7 +137,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk1: osc@1 {
+		axi_clk: oscclk1 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -146,7 +146,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		osc@2 {
+		oscclk2 {
 			/* DDR2 */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -155,7 +155,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		oscclk3: osc@3 {
+		hdlcd_clk: oscclk3 {
 			/* HDLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -164,7 +164,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		osc@4 {
+		oscclk4 {
 			/* Test chip gate configuration */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -173,7 +173,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		smbclk: osc@5 {
+		smbclk: oscclk5 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -182,7 +182,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		temp@0 {
+		temp-dcc {
 			/* DCC internal operating temperature */
 			compatible = "arm,vexpress-temp";
 			arm,vexpress-sysreg,func = <4 0>;
@@ -190,7 +190,7 @@
 		};
 	};
 
-	smb {
+	smb@08000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -250,4 +250,17 @@
 
 		/include/ "vexpress-v2m-rs1.dtsi"
 	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
 };
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index d949facba..b608a03ee 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -190,7 +190,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		osc@0 {
+		oscclk0: extsaxiclk {
 			/* ACLK clock to the AXI master port on the test chip */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -199,7 +199,7 @@
 			clock-output-names = "extsaxiclk";
 		};
 
-		oscclk1: osc@1 {
+		oscclk1: clcdclk {
 			/* Reference clock for the CLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -208,7 +208,7 @@
 			clock-output-names = "clcdclk";
 		};
 
-		smbclk: oscclk2: osc@2 {
+		smbclk: oscclk2: tcrefclk {
 			/* Reference clock for the test chip internal PLLs */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -217,7 +217,7 @@
 			clock-output-names = "tcrefclk";
 		};
 
-		volt@0 {
+		volt-vd10 {
 			/* Test Chip internal logic voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -226,7 +226,7 @@
 			label = "VD10";
 		};
 
-		volt@1 {
+		volt-vd10-s2 {
 			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
@@ -235,7 +235,7 @@
 			label = "VD10_S2";
 		};
 
-		volt@2 {
+		volt-vd10-s3 {
 			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 2>;
@@ -244,7 +244,7 @@
 			label = "VD10_S3";
 		};
 
-		volt@3 {
+		volt-vcc1v8 {
 			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 3>;
@@ -253,7 +253,7 @@
 			label = "VCC1V8";
 		};
 
-		volt@4 {
+		volt-ddr2vtt {
 			/* DDR2 SDRAM VTT termination voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 4>;
@@ -262,7 +262,7 @@
 			label = "DDR2VTT";
 		};
 
-		volt@5 {
+		volt-vcc3v3 {
 			/* Local board supply for miscellaneous logic external to the Test Chip */
 			arm,vexpress-sysreg,func = <2 5>;
 			compatible = "arm,vexpress-volt";
@@ -271,28 +271,28 @@
 			label = "VCC3V3";
 		};
 
-		amp@0 {
+		amp-vd10-s2 {
 			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
 			compatible = "arm,vexpress-amp";
 			arm,vexpress-sysreg,func = <3 0>;
 			label = "VD10_S2";
 		};
 
-		amp@1 {
+		amp-vd10-s3 {
 			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
 			compatible = "arm,vexpress-amp";
 			arm,vexpress-sysreg,func = <3 1>;
 			label = "VD10_S3";
 		};
 
-		power@0 {
+		power-vd10-s2 {
 			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
 			compatible = "arm,vexpress-power";
 			arm,vexpress-sysreg,func = <12 0>;
 			label = "PVD10_S2";
 		};
 
-		power@1 {
+		power-vd10-s3 {
 			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
 			compatible = "arm,vexpress-power";
 			arm,vexpress-sysreg,func = <12 1>;
@@ -300,7 +300,7 @@
 		};
 	};
 
-	smb {
+	smb@04000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -359,4 +359,17 @@
 
 		/include/ "vexpress-v2m.dtsi"
 	};
+
+	site2: hsb@e0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe0000000 0x20000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
 };
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 606753eb7..a8a8e434f 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -1,15 +1,47 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
 	chosen {
-		bootargs = "console=ttyLP0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
 	clk16m: clk16m {
@@ -18,41 +50,51 @@
 		clock-frequency = <16000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sys_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+	};
 
-		/* USBH_PEN */
-		usbh_vbus_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1_reg>;
-			reg = <1>;
-			regulator-name = "usbh_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio2 19 GPIO_ACTIVE_LOW>;
-			vin-supply = <&sys_5v0_reg>;
-		};
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
+		vin-supply = <&reg_5v0>;
 	};
 };
 
 &bl {
 	brightness-levels = <0 4 8 16 32 64 128 255>;
 	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
 	status  = "okay";
 };
 
+&dcu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dcu0_1>;
+	fsl,panel = <&panel>;
+	status = "okay";
+};
+
 &dspi1 {
 	status = "okay";
 
@@ -100,6 +142,14 @@
 	status = "okay";
 };
 
+&reg_module_3v3 {
+	vin-supply = <&reg_3v3>;
+};
+
+&tcon0 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
@@ -113,7 +163,7 @@
 };
 
 &usbh1 {
-	vbus-supply = <&usbh_vbus_reg>;
+	vbus-supply = <&reg_usbh_vbus>;
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index 68ca125b5..b7417094d 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -1,26 +1,101 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec0;
+	};
+
 	bl: backlight {
 		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		pwms = <&pwm0 0 5000000 0>;
+		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &adc0 {
 	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
 };
 
 &adc1 {
 	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan0>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
+				 <&clks VF610_CLK_ENET_50M>;
 };
 
 &dspi1 {
@@ -38,10 +113,12 @@
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	bus-width = <4>;
 	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	disable-wp;
 };
 
 &fec1 {
 	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 };
@@ -52,6 +129,24 @@
 	pinctrl-0 = <&pinctrl_i2c0>;
 };
 
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <32>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0>;
@@ -105,6 +200,20 @@
 
 &iomuxc {
 	vf610-colibri {
+		pinctrl_flexcan0: can0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__CAN0_RX	0x31F1
+				VF610_PAD_PTB15__CAN0_TX	0x31F2
+			>;
+		};
+
+		pinctrl_flexcan1: can1grp {
+			fsl,pins = <
+				VF610_PAD_PTB16__CAN1_RX	0x31F1
+				VF610_PAD_PTB17__CAN1_TX	0x31F2
+			>;
+		};
+
 		pinctrl_gpio_ext: gpio_ext {
 			fsl,pins = <
 				VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
@@ -113,6 +222,39 @@
 			>;
 		};
 
+		pinctrl_dcu0_1: dcu0grp_1 {
+			fsl,pins = <
+				VF610_PAD_PTE0__DCU0_HSYNC	0x1902
+				VF610_PAD_PTE1__DCU0_VSYNC	0x1902
+				VF610_PAD_PTE2__DCU0_PCLK	0x1902
+				VF610_PAD_PTE4__DCU0_DE		0x1902
+				VF610_PAD_PTE5__DCU0_R0		0x1902
+				VF610_PAD_PTE6__DCU0_R1		0x1902
+				VF610_PAD_PTE7__DCU0_R2		0x1902
+				VF610_PAD_PTE8__DCU0_R3		0x1902
+				VF610_PAD_PTE9__DCU0_R4		0x1902
+				VF610_PAD_PTE10__DCU0_R5	0x1902
+				VF610_PAD_PTE11__DCU0_R6	0x1902
+				VF610_PAD_PTE12__DCU0_R7	0x1902
+				VF610_PAD_PTE13__DCU0_G0	0x1902
+				VF610_PAD_PTE14__DCU0_G1	0x1902
+				VF610_PAD_PTE15__DCU0_G2	0x1902
+				VF610_PAD_PTE16__DCU0_G3	0x1902
+				VF610_PAD_PTE17__DCU0_G4	0x1902
+				VF610_PAD_PTE18__DCU0_G5	0x1902
+				VF610_PAD_PTE19__DCU0_G6	0x1902
+				VF610_PAD_PTE20__DCU0_G7	0x1902
+				VF610_PAD_PTE21__DCU0_B0	0x1902
+				VF610_PAD_PTE22__DCU0_B1	0x1902
+				VF610_PAD_PTE23__DCU0_B2	0x1902
+				VF610_PAD_PTE24__DCU0_B3	0x1902
+				VF610_PAD_PTE25__DCU0_B4	0x1902
+				VF610_PAD_PTE26__DCU0_B5	0x1902
+				VF610_PAD_PTE27__DCU0_B6	0x1902
+				VF610_PAD_PTE28__DCU0_B7	0x1902
+			>;
+		};
+
 		pinctrl_dspi1: dspi1grp {
 			fsl,pins = <
 				VF610_PAD_PTD5__DSPI1_CS0		0x33e2
@@ -149,6 +291,12 @@
 			>;
 		};
 
+		pinctrl_gpio_bl_on: gpio_bl_on {
+			fsl,pins = <
+				VF610_PAD_PTC0__GPIO_45		0x22ef
+			>;
+		};
+
 		pinctrl_i2c0: i2c0grp {
 			fsl,pins = <
 				VF610_PAD_PTB14__I2C0_SCL		0x37ff
@@ -156,6 +304,25 @@
 			>;
 		};
 
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				VF610_PAD_PTD23__NF_IO7		0x28df
+				VF610_PAD_PTD22__NF_IO6		0x28df
+				VF610_PAD_PTD21__NF_IO5		0x28df
+				VF610_PAD_PTD20__NF_IO4		0x28df
+				VF610_PAD_PTD19__NF_IO3		0x28df
+				VF610_PAD_PTD18__NF_IO2		0x28df
+				VF610_PAD_PTD17__NF_IO1		0x28df
+				VF610_PAD_PTD16__NF_IO0		0x28df
+				VF610_PAD_PTB24__NF_WE_B	0x28c2
+				VF610_PAD_PTB25__NF_CE0_B	0x28c2
+				VF610_PAD_PTB27__NF_RE_B	0x28c2
+				VF610_PAD_PTC26__NF_RB_B	0x283d
+				VF610_PAD_PTC27__NF_ALE		0x28c2
+				VF610_PAD_PTC28__NF_CLE		0x28c2
+			>;
+		};
+
 		pinctrl_pwm0: pwm0grp {
 			fsl,pins = <
 				VF610_PAD_PTB0__FTM0_CH0		0x1182
@@ -174,6 +341,8 @@
 			fsl,pins = <
 				VF610_PAD_PTB10__UART0_TX		0x21a2
 				VF610_PAD_PTB11__UART0_RX		0x21a1
+				VF610_PAD_PTB12__UART0_RTS		0x21a2
+				VF610_PAD_PTB13__UART0_CTS		0x21a1
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
index 7fc782c4f..b3aeab58f 100644
--- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
@@ -1,10 +1,42 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -15,3 +47,8 @@
 	model = "Toradex Colibri VF50 on Colibri Evaluation Board";
 	compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
 };
+
+&touchscreen {
+	vf50-ts-min-pressure = <200>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
index cee34a32f..1a8a0efa1 100644
--- a/arch/arm/boot/dts/vf500-colibri.dtsi
+++ b/arch/arm/boot/dts/vf500-colibri.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "vf500.dtsi"
@@ -17,4 +49,56 @@
 	memory {
 		reg = <0x80000000 0x8000000>;
 	};
+
+	touchscreen: vf50-touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		io-channels = <&adc1 0>,<&adc0 0>,
+				<&adc0 1>,<&adc1 2>;
+		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle","default","gpios";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>;
+		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		vf50-ts-min-pressure = <200>;
+		status = "disabled";
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_touchctrl_idle: touchctrl_idle {
+			fsl,pins = <
+				VF610_PAD_PTA18__GPIO_8		0x006d
+				VF610_PAD_PTA19__GPIO_9		0x006c
+				>;
+		};
+
+		pinctrl_touchctrl_default: touchctrl_default {
+			fsl,pins = <
+				VF610_PAD_PTA18__ADC0_SE0	0x0040
+				VF610_PAD_PTA19__ADC0_SE1	0x0040
+				VF610_PAD_PTA16__ADC1_SE0	0x0040
+				VF610_PAD_PTB2__ADC1_SE2	0x0040
+				>;
+		};
+
+		pinctrl_touchctrl_gpios: touchctrl_gpios {
+			fsl,pins = <
+				VF610_PAD_PTA23__GPIO_13	0x22e9
+				VF610_PAD_PTB23__GPIO_93	0x22e9
+				VF610_PAD_PTA22__GPIO_12	0x22e9
+				VF610_PAD_PTA11__GPIO_4		0x22e9
+				>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index e976d2fa1..a3824e61b 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
@@ -43,6 +75,16 @@
 				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
 			};
 		};
+
+		aips-bus@40080000 {
+			pmu@40089000 {
+				compatible = "arm,cortex-a5-pmu";
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-affinity = <&a5_cpu>;
+				reg = <0x40089000 0x1000>;
+			};
+		};
+
 	};
 };
 
diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
index 10ebe99e2..dbca4f86f 100644
--- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
@@ -1,10 +1,42 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -14,4 +46,4 @@
 / {
 	model = "Toradex Colibri VF61 on Colibri Evaluation Board";
 	compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610";
-};
\ No newline at end of file
+};
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index 19fe045b8..9ec9e337f 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "vf610.dtsi"
@@ -19,7 +51,7 @@
 	};
 };
 
-&L2 {
-	arm,data-latency = <2 1 2>;
-	arm,tag-latency = <3 2 3>;
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <50000000>;
 };
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 375ab23ca..cdc100732 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -1,10 +1,42 @@
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -96,6 +128,10 @@
 &clks {
 	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
 	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
+				 <&clks VF610_CLK_ENET_EXT>;
 };
 
 &dspi0 {
@@ -237,6 +273,33 @@
 			>;
 		};
 
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				VF610_PAD_PTD31__NF_IO15	0x28df
+				VF610_PAD_PTD30__NF_IO14	0x28df
+				VF610_PAD_PTD29__NF_IO13	0x28df
+				VF610_PAD_PTD28__NF_IO12	0x28df
+				VF610_PAD_PTD27__NF_IO11	0x28df
+				VF610_PAD_PTD26__NF_IO10	0x28df
+				VF610_PAD_PTD25__NF_IO9		0x28df
+				VF610_PAD_PTD24__NF_IO8		0x28df
+				VF610_PAD_PTD23__NF_IO7		0x28df
+				VF610_PAD_PTD22__NF_IO6		0x28df
+				VF610_PAD_PTD21__NF_IO5		0x28df
+				VF610_PAD_PTD20__NF_IO4		0x28df
+				VF610_PAD_PTD19__NF_IO3		0x28df
+				VF610_PAD_PTD18__NF_IO2		0x28df
+				VF610_PAD_PTD17__NF_IO1		0x28df
+				VF610_PAD_PTD16__NF_IO0		0x28df
+				VF610_PAD_PTB24__NF_WE_B	0x28c2
+				VF610_PAD_PTB25__NF_CE0_B	0x28c2
+				VF610_PAD_PTB27__NF_RE_B	0x28c2
+				VF610_PAD_PTC26__NF_RB_B	0x283d
+				VF610_PAD_PTC27__NF_ALE		0x28c2
+				VF610_PAD_PTC28__NF_CLE		0x28c2
+			>;
+		};
+
 		pinctrl_pwm0: pwm0grp {
 			fsl,pins = <
 				VF610_PAD_PTB0__FTM0_CH0		0x1582
@@ -274,6 +337,26 @@
 	};
 };
 
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
new file mode 100644
index 000000000..5c1fcab4a
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -0,0 +1,746 @@
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 Development Board, Rev B";
+	compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		pinctrl-0 = <&pinctrl_mdio_mux>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8  GPIO_ACTIVE_HIGH
+			 &gpio0 9  GPIO_ACTIVE_HIGH
+			 &gpio0 24 GPIO_ACTIVE_HIGH
+			 &gpio0 25 GPIO_ACTIVE_HIGH>;
+		mdio-parent-bus = <&mdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio_mux_1: mdio@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0: switch0@0 {
+				compatible = "marvell,mv88e6085";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				dsa,member = <0 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						label = "lan0";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan1";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+					};
+
+					switch0port5: port@5 {
+						reg = <5>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch1port6
+							&switch2port9>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "cpu";
+						ethernet = <&fec1>;
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+
+		mdio_mux_2: mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1: switch1@0 {
+				compatible = "marvell,mv88e6085";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				dsa,member = <0 1>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						label = "lan3";
+						phy-handle = <&switch1phy0>;
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan4";
+						phy-handle = <&switch1phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan5";
+						phy-handle = <&switch1phy2>;
+					};
+
+					switch1port5: port@5 {
+						reg = <5>;
+						label = "dsa";
+						link = <&switch2port9>;
+						phy-mode = "rgmii-txid";
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					switch1port6: port@6 {
+						reg = <6>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch0port5>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					switch1phy0: switch1phy0@0 {
+						reg = <0>;
+					};
+					switch1phy1: switch1phy0@1 {
+						reg = <1>;
+					};
+					switch1phy2: switch1phy0@2 {
+						reg = <2>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_4: mdio@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			switch2: switch2@0 {
+				compatible = "marvell,mv88e6085";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				dsa,member = <0 2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						label = "lan6";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan7";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan8";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "optical3";
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							link-gpios = <&gpio6 2
+							      GPIO_ACTIVE_HIGH>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "optical4";
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							link-gpios = <&gpio6 3
+							      GPIO_ACTIVE_HIGH>;
+						};
+					};
+
+					switch2port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch1port5
+							&switch0port5>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+
+		mdio_mux_8: mdio@8 {
+			reg = <8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_usb_vbus>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 6 0>;
+	};
+
+	spi0 {
+		compatible = "spi-gpio";
+		pinctrl-0 = <&pinctrl_gpio_spi0>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-sck  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_HIGH
+			     &gpio1  8 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <2>;
+
+		m25p128@0 {
+			compatible = "m25p128", "jedec,spi-nor";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+		};
+
+		at93c46d@1 {
+			compatible = "atmel,at93c46d";
+			pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>;
+			pinctrl-names = "default";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			reg = <1>;
+			spi-max-frequency = <500000>;
+			spi-cs-high;
+			data-size = <16>;
+			select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		   speed = <100>;
+		   full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio5: pca9554@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+	};
+
+	gpio6: pca9554@22 {
+		compatible = "nxp,pca9554";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9554_22>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	at24c04@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	at24c04@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+
+	ds1682@6b {
+		compatible = "dallas,ds1682";
+		reg = <0x6b>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tca9548@70 {
+		compatible = "nxp,pca9548";
+		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sfp1: at24c04@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			sfp2: at24c04@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			sfp3: at24c04@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			sfp4: at24c04@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	vbus-supply = <&usb0_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adc0_ad5: adc0ad5grp {
+		fsl,pins = <
+			VF610_PAD_PTC30__ADC0_SE5	0x00a1
+		>;
+	};
+
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB18__DSPI0_CS1	0x1182
+			VF610_PAD_PTB19__DSPI0_CS0	0x1182
+			VF610_PAD_PTB20__DSPI0_SIN	0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT	0x1182
+			VF610_PAD_PTB22__DSPI0_SCK	0x1182
+		>;
+	};
+
+	pinctrl_dspi2: dspi2grp {
+		fsl,pins = <
+			VF610_PAD_PTD31__DSPI2_CS1	0x1182
+			VF610_PAD_PTD30__DSPI2_CS0	0x1182
+			VF610_PAD_PTD29__DSPI2_SIN	0x1181
+			VF610_PAD_PTD28__DSPI2_SOUT	0x1182
+			VF610_PAD_PTD27__DSPI2_SCK	0x1182
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTA7__GPIO_134	0x219d
+		>;
+	};
+
+	pinctrl_fec0: fec0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ENET_RMII0_MDC	0x30d2
+			VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30d3
+			VF610_PAD_PTC2__ENET_RMII0_CRS	0x30d1
+			VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30d1
+			VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30d1
+			VF610_PAD_PTC5__ENET_RMII0_RXER	0x30d1
+			VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30d2
+			VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30d2
+			VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
+		fsl,pins = <
+			VF610_PAD_PTE27__GPIO_132	0x33e2
+		>;
+	};
+
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+		fsl,pins = <
+			VF610_PAD_PTB22__GPIO_44	0x33e2
+			VF610_PAD_PTB21__GPIO_43	0x33e2
+			VF610_PAD_PTB20__GPIO_42	0x33e1
+			VF610_PAD_PTB19__GPIO_41	0x33e2
+			VF610_PAD_PTB18__GPIO_40	0x33e2
+		>;
+	};
+
+	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+		fsl,pins = <
+			 VF610_PAD_PTE14__GPIO_119	0x31c2
+			 >;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL	0x37ff
+			VF610_PAD_PTB15__I2C0_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL	0x37ff
+			VF610_PAD_PTB17__I2C1_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL	0x37ff
+			VF610_PAD_PTA23__I2C2_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			VF610_PAD_PTA30__I2C3_SCL	0x37ff
+			VF610_PAD_PTA31__I2C3_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			 VF610_PAD_PTD20__GPIO_74	0x31c2
+			 >;
+	};
+
+	pinctrl_mdio_mux: pinctrl-mdio-mux {
+		fsl,pins = <
+			VF610_PAD_PTA18__GPIO_8		0x31c2
+			VF610_PAD_PTA19__GPIO_9		0x31c2
+			VF610_PAD_PTB2__GPIO_24		0x31c2
+			VF610_PAD_PTB3__GPIO_25		0x31c2
+		>;
+	};
+
+	pinctrl_pca9554_22: pinctrl-pca95540-22 {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98	0x219d
+		>;
+	};
+
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			VF610_PAD_PTB0__FTM0_CH0	0x1582
+			VF610_PAD_PTB1__FTM0_CH1	0x1582
+			VF610_PAD_PTB2__FTM0_CH2	0x1582
+			VF610_PAD_PTB3__FTM0_CH3	0x1582
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD7__QSPI0_B_QSCK	0x31c3
+			VF610_PAD_PTD8__QSPI0_B_CS0	0x31ff
+			VF610_PAD_PTD9__QSPI0_B_DATA3	0x31c3
+			VF610_PAD_PTD10__QSPI0_B_DATA2	0x31c3
+			VF610_PAD_PTD11__QSPI0_B_DATA1	0x31c3
+			VF610_PAD_PTD12__QSPI0_B_DATA0	0x31c3
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX	0x21a2
+			VF610_PAD_PTB11__UART0_RX	0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX	0x21a2
+			VF610_PAD_PTB24__UART1_RX	0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX	0x21a2
+			VF610_PAD_PTD1__UART2_RX	0x21a1
+		>;
+	};
+
+	pinctrl_usb_vbus: pinctrl-usb-vbus {
+		fsl,pins = <
+			VF610_PAD_PTA16__GPIO_6	0x31c2
+		>;
+	};
+
+	pinctrl_usb0_host: usb0-host-grp {
+		fsl,pins = <
+			VF610_PAD_PTD6__GPIO_85		0x0062
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 5f8eb1bd7..0cfc060f9 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "vf500.dtsi"
@@ -19,7 +51,7 @@
 		reg = <0x40006000 0x1000>;
 		cache-unified;
 		cache-level = <2>;
-		arm,data-latency = <1 1 1>;
+		arm,data-latency = <3 3 3>;
 		arm,tag-latency = <2 2 2>;
 	};
 };
diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/vf610m4-cosmic.dts
new file mode 100644
index 000000000..8944a2d20
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4-cosmic.dts
@@ -0,0 +1,90 @@
+/*
+ * Device tree for Cosmic+ VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015
+ *
+ * Based on vf610m4 Colibri
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+	model = "VF610 Cortex-M4";
+	compatible = "fsl,vf610m4";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-cosmic {
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				VF610_PAD_PTA20__UART3_TX		0x21a2
+				VF610_PAD_PTA21__UART3_RX		0x21a1
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa335166..2c13ec696 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "vf610-pinfunc.h"
@@ -16,6 +48,8 @@
 	aliases {
 		can0 = &can0;
 		can1 = &can1;
+		ethernet0 = &fec0;
+		ethernet1 = &fec1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -61,6 +95,7 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x40000000 0x00070000>;
 			ranges;
 
 			mscm_cpucfg: cpucfg@40001000 {
@@ -158,7 +193,7 @@
 				interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
-				spi-num-chipselects = <5>;
+				spi-num-chipselects = <6>;
 				status = "disabled";
 			};
 
@@ -170,7 +205,35 @@
 				interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
-				spi-num-chipselects = <5>;
+				spi-num-chipselects = <4>;
+				status = "disabled";
+			};
+
+			sai0: sai@4002f000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x4002f000 0x1000>;
+				interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI0>,
+					<&clks VF610_CLK_SAI0_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 17>,
+					<&edma0 0 16>;
+				status = "disabled";
+			};
+
+			sai1: sai@40030000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40030000 0x1000>;
+				interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI1>,
+					<&clks VF610_CLK_SAI1_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 19>,
+					<&edma0 0 18>;
 				status = "disabled";
 			};
 
@@ -178,14 +241,30 @@
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
 				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_SAI2>;
-				clock-names = "sai";
+				clocks = <&clks VF610_CLK_SAI2>,
+					<&clks VF610_CLK_SAI2_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
 				dma-names = "tx", "rx";
 				dmas = <&edma0 0 21>,
 					<&edma0 0 20>;
 				status = "disabled";
 			};
 
+			sai3: sai@40032000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40032000 0x1000>;
+				interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI3>,
+					<&clks VF610_CLK_SAI3_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 1 9>,
+					<&edma0 1 8>;
+				status = "disabled";
+			};
+
 			pit: pit@40037000 {
 				compatible = "fsl,vf610-pit";
 				reg = <0x40037000 0x1000>;
@@ -226,6 +305,17 @@
 				interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ADC0>;
 				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
+			};
+
+			tcon0: timing-controller@4003d000 {
+				compatible = "fsl,vf610-tcon";
+				reg = <0x4003d000 0x1000>;
+				clocks = <&clks VF610_CLK_TCON0>;
+				clock-names = "ipg";
 				status = "disabled";
 			};
 
@@ -242,7 +332,8 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
-				reg = <0x40044000 0x1000>;
+				reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_QSPI0_EN>,
 					<&clks VF610_CLK_QSPI0>;
@@ -333,6 +424,17 @@
 				status = "disabled";
 			};
 
+			dcu0: dcu@40058000 {
+				compatible = "fsl,vf610-dcu";
+				reg = <0x40058000 0x1200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DCU0>,
+					<&clks VF610_CLK_DCU0_DIV>;
+				clock-names = "dcu", "pix";
+				fsl,tcon = <&tcon0>;
+				status = "disabled";
+			};
+
 			i2c0: i2c@40066000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -347,6 +449,20 @@
 				status = "disabled";
 			};
 
+			i2c1: i2c@40067000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40067000 0x1000>;
+				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C1>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 52>,
+					<&edma0 0 53>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
 			clks: ccm@4006b000 {
 				compatible = "fsl,vf610-ccm";
 				reg = <0x4006b000 0x1000>;
@@ -385,6 +501,7 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x40080000 0x0007f000>;
 			ranges;
 
 			edma1: dma-controller@40098000 {
@@ -404,14 +521,13 @@
 			};
 
 			snvs0: snvs@400a7000 {
-			    compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x400a7000 0x2000>;
+			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x400a7000 0x2000>;
 
-				snvsrtc: snvs-rtc-lp@34 {
+				snvsrtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs0>;
+					offset = <0x34>;
 					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks VF610_CLK_SNVS>;
 					clock-names = "snvs-rtc";
@@ -436,12 +552,50 @@
 				status = "disabled";
 			};
 
+			dspi2: dspi2@400ac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ac000 0x1000>;
+				interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI2>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				status = "disabled";
+			};
+
+			dspi3: dspi3@400ad000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ad000 0x1000>;
+				interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI3>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				status = "disabled";
+			};
+
 			adc1: adc@400bb000 {
 				compatible = "fsl,vf610-adc";
 				reg = <0x400bb000 0x1000>;
 				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ADC1>;
 				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
+			};
+
+			esdhc0: esdhc@400b1000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b1000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC0>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -488,6 +642,37 @@
 				status = "disabled";
 			};
 
+			qspi1: quadspi@400c4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_QSPI1_EN>,
+					<&clks VF610_CLK_QSPI1>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			dac0: dac@400cc000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cc000 1000>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC0>;
+				status = "disabled";
+			};
+
+			dac1: dac@400cd000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cd000 1000>;
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC1>;
+				status = "disabled";
+			};
+
 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
@@ -520,6 +705,49 @@
 				status = "disabled";
 			};
 
+			nfc: nand@400e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-nfc";
+				reg = <0x400e0000 0x4000>;
+				interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_NFC>;
+				clock-names = "nfc";
+				status = "disabled";
+			};
+
+			i2c2: i2c@400e6000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e6000 0x1000>;
+				interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C2>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 36>,
+					<&edma0 1 37>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@400e7000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e7000 0x1000>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C3>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 38>,
+					<&edma0 1 39>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+		};
+
+		iio-hwmon {
+			compatible = "iio-hwmon";
+			io-channels = <&adc0 16>, <&adc1 16>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/wd-mbwe.dts b/arch/arm/boot/dts/wd-mbwe.dts
new file mode 100644
index 000000000..ac3250ae8
--- /dev/null
+++ b/arch/arm/boot/dts/wd-mbwe.dts
@@ -0,0 +1,112 @@
+/*
+ * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+#include "ox810se.dtsi"
+
+/ {
+	model = "Western Digital My Book World Edition";
+
+	compatible = "wd,mbwe", "oxsemi,ox810se";
+
+	chosen {
+		bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
+	};
+
+	memory {
+		/* 128Mbytes DDR */
+		reg = <0x48000000 0x8000000>;
+	};
+
+	aliases {
+		serial1 = &uart1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		power {
+			label = "power";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x198>;
+		};
+
+		recovery {
+			label = "recovery";
+			gpios = <&gpio0 4 1>;
+			linux,code = <0xab>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		a0 {
+			label = "activity0";
+			gpios = <&gpio0 25 0>;
+			default-state = "keep";
+		};
+
+		a1 {
+			label = "activity1";
+			gpios = <&gpio0 26 0>;
+			default-state = "keep";
+		};
+
+		a2 {
+			label = "activity2";
+			gpios = <&gpio0 5 0>;
+			default-state = "keep";
+		};
+
+		a3 {
+			label = "activity3";
+			gpios = <&gpio0 6 0>;
+			default-state = "keep";
+		};
+
+		a4 {
+			label = "activity4";
+			gpios = <&gpio0 7 0>;
+			default-state = "keep";
+		};
+
+		a5 {
+			label = "activity5";
+			gpios = <&gpio1 2 0>;
+			default-state = "keep";
+		};
+	};
+
+	i2c-gpio {
+		compatible = "i2c-gpio";
+		gpios = <&gpio0 3 0 /* sda */
+			 &gpio0 2 0 /* scl */
+			 >;
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc0: rtc@48 {
+			compatible = "st,m41t00";
+			reg = <0x68>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index a1a854b8a..e9ef539e1 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -281,8 +281,8 @@
 
 		sdhc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
-			reg = <0xd800a000 0x1000>;
-			interrupts = <20 21>;
+			reg = <0xd800a000 0x400>;
+			interrupts = <20>, <21>;
 			clocks = <&clksdhc>;
 			bus-width = <4>;
 		};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index b1c59a766..e12213d16 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -187,6 +187,15 @@
 			interrupts = <43>;
 		};
 
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x400>;
+			interrupts = <20>, <21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
 		fb: fb@d8050800 {
 			compatible = "wm,wm8505-fb";
 			reg = <0xd8050800 0x200>;
diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi
index 557a9c2ac..46d076d73 100644
--- a/arch/arm/boot/dts/wm8750.dtsi
+++ b/arch/arm/boot/dts/wm8750.dtsi
@@ -17,7 +17,7 @@
 
 		cpu {
 			device_type = "cpu";
-			compatible = "arm,arm1176ej-s";
+			compatible = "arm,arm1176jzf";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 06915080b..f283ff083 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -19,7 +19,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
@@ -33,7 +33,7 @@
 			>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;
@@ -57,7 +57,7 @@
 		regulator-always-on;
 	};
 
-	amba {
+	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -101,6 +101,8 @@
 			#gpio-cells = <2>;
 			clocks = <&clkc 42>;
 			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupts = <0 20 4>;
 			reg = <0xe000a000 0x1000>;
@@ -139,6 +141,7 @@
 		L2: cache-controller@f8f02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xF8F02000 0x1000>;
+			interrupts = <0 2 4>;
 			arm,data-latency = <3 2 2>;
 			arm,tag-latency = <2 2 2>;
 			cache-unified;
@@ -237,7 +240,7 @@
 		slcr: slcr@f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
@@ -258,6 +261,13 @@
 				reg = <0x100 0x100>;
 			};
 
+			rstc: rstc@200 {
+				compatible = "xlnx,zynq-reset";
+				reg = <0x200 0x48>;
+				#reset-cells = <1>;
+				syscon = <&slcr>;
+			};
+
 			pinctrl0: pinctrl@700 {
 				compatible = "xlnx,pinctrl-zynq";
 				reg = <0x700 0x200>;
@@ -286,6 +296,11 @@
 		devcfg: devcfg@f8007000 {
 			compatible = "xlnx,zynq-devcfg-1.0";
 			reg = <0xf8007000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 8 4>;
+			clocks = <&clkc 12>;
+			clock-names = "ref_clk";
+			syscon = <&slcr>;
 		};
 
 		global_timer: timer@f8f00200 {
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index 9efd16cb2..307ed201d 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -34,7 +34,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+		bootargs = "earlycon root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
 		stdout-path = "serial0:115200n8";
 	};
 };
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index fb59d34e8..e96959b2e 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -30,10 +30,31 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		sw14 {
+			label = "sw14";
+			gpios = <&gpio0 12 0>;
+			linux,code = <108>; /* down */
+			wakeup-source;
+			autorepeat;
+		};
+		sw13 {
+			label = "sw13";
+			gpios = <&gpio0 14 0>;
+			linux,code = <103>; /* up */
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -50,6 +71,13 @@
 	};
 };
 
+&amba {
+	ocm: sram@fffc0000 {
+		compatible = "mmio-sram";
+		reg = <0xfffc0000 0x10000>;
+	};
+};
+
 &can0 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index abf5d238a..be6a986bb 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -30,7 +30,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index b9f252201..7250c1eac 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -29,7 +29,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index 16c9cacd6..d9e0f3e70 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -29,10 +29,15 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 		stdout-path = "serial0:115200n8";
 	};
 
+	usb_phy0: phy0 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 46 1>;
+	};
 };
 
 &clkc {
@@ -56,3 +61,9 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index c3a4e9ceb..9353184d7 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -17,6 +17,3 @@ config SHARP_PARAM
 
 config SHARP_SCOOP
 	bool
-
-config TI_PRIV_EDMA
-	bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 6ee5959a8..27f23b15b 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -15,6 +15,5 @@ obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
-obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o
 obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
 obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 1143c4d5c..301281645 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -310,7 +310,7 @@ static inline void unmap_single(struct device *dev, struct safe_buffer *buf,
  */
 static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page,
 		unsigned long offset, size_t size, enum dma_data_direction dir,
-		struct dma_attrs *attrs)
+		unsigned long attrs)
 {
 	dma_addr_t dma_addr;
 	int ret;
@@ -344,7 +344,7 @@ static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page,
  * should be)
  */
 static void dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir, struct dma_attrs *attrs)
+		enum dma_data_direction dir, unsigned long attrs)
 {
 	struct safe_buffer *buf;
 
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
deleted file mode 100644
index 873dbfcc7..000000000
--- a/arch/arm/common/edma.c
+++ /dev/null
@@ -1,1876 +0,0 @@
-/*
- * EDMA3 support for DaVinci
- *
- * Copyright (C) 2006-2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_dma.h>
-#include <linux/of_irq.h>
-#include <linux/pm_runtime.h>
-
-#include <linux/platform_data/edma.h>
-
-/* Offsets matching "struct edmacc_param" */
-#define PARM_OPT		0x00
-#define PARM_SRC		0x04
-#define PARM_A_B_CNT		0x08
-#define PARM_DST		0x0c
-#define PARM_SRC_DST_BIDX	0x10
-#define PARM_LINK_BCNTRLD	0x14
-#define PARM_SRC_DST_CIDX	0x18
-#define PARM_CCNT		0x1c
-
-#define PARM_SIZE		0x20
-
-/* Offsets for EDMA CC global channel registers and their shadows */
-#define SH_ER		0x00	/* 64 bits */
-#define SH_ECR		0x08	/* 64 bits */
-#define SH_ESR		0x10	/* 64 bits */
-#define SH_CER		0x18	/* 64 bits */
-#define SH_EER		0x20	/* 64 bits */
-#define SH_EECR		0x28	/* 64 bits */
-#define SH_EESR		0x30	/* 64 bits */
-#define SH_SER		0x38	/* 64 bits */
-#define SH_SECR		0x40	/* 64 bits */
-#define SH_IER		0x50	/* 64 bits */
-#define SH_IECR		0x58	/* 64 bits */
-#define SH_IESR		0x60	/* 64 bits */
-#define SH_IPR		0x68	/* 64 bits */
-#define SH_ICR		0x70	/* 64 bits */
-#define SH_IEVAL	0x78
-#define SH_QER		0x80
-#define SH_QEER		0x84
-#define SH_QEECR	0x88
-#define SH_QEESR	0x8c
-#define SH_QSER		0x90
-#define SH_QSECR	0x94
-#define SH_SIZE		0x200
-
-/* Offsets for EDMA CC global registers */
-#define EDMA_REV	0x0000
-#define EDMA_CCCFG	0x0004
-#define EDMA_QCHMAP	0x0200	/* 8 registers */
-#define EDMA_DMAQNUM	0x0240	/* 8 registers (4 on OMAP-L1xx) */
-#define EDMA_QDMAQNUM	0x0260
-#define EDMA_QUETCMAP	0x0280
-#define EDMA_QUEPRI	0x0284
-#define EDMA_EMR	0x0300	/* 64 bits */
-#define EDMA_EMCR	0x0308	/* 64 bits */
-#define EDMA_QEMR	0x0310
-#define EDMA_QEMCR	0x0314
-#define EDMA_CCERR	0x0318
-#define EDMA_CCERRCLR	0x031c
-#define EDMA_EEVAL	0x0320
-#define EDMA_DRAE	0x0340	/* 4 x 64 bits*/
-#define EDMA_QRAE	0x0380	/* 4 registers */
-#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
-#define EDMA_QSTAT	0x0600	/* 2 registers */
-#define EDMA_QWMTHRA	0x0620
-#define EDMA_QWMTHRB	0x0624
-#define EDMA_CCSTAT	0x0640
-
-#define EDMA_M		0x1000	/* global channel registers */
-#define EDMA_ECR	0x1008
-#define EDMA_ECRH	0x100C
-#define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
-#define EDMA_PARM	0x4000	/* 128 param entries */
-
-#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
-
-#define EDMA_DCHMAP	0x0100  /* 64 registers */
-
-/* CCCFG register */
-#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
-#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
-#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
-#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
-#define CHMAP_EXIST		BIT(24)
-
-#define EDMA_MAX_DMACH           64
-#define EDMA_MAX_PARAMENTRY     512
-
-/*****************************************************************************/
-
-static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
-
-static inline unsigned int edma_read(unsigned ctlr, int offset)
-{
-	return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
-}
-
-static inline void edma_write(unsigned ctlr, int offset, int val)
-{
-	__raw_writel(val, edmacc_regs_base[ctlr] + offset);
-}
-static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
-		unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_and(unsigned ctlr, int offset, unsigned and)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_or(unsigned ctlr, int offset, unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
-{
-	return edma_read(ctlr, offset + (i << 2));
-}
-static inline void edma_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, offset + (i << 2), val);
-}
-static inline void edma_modify_array(unsigned ctlr, int offset, int i,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, offset + (i << 2), and, or);
-}
-static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
-{
-	edma_or(ctlr, offset + (i << 2), or);
-}
-static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned or)
-{
-	edma_or(ctlr, offset + ((i*2 + j) << 2), or);
-}
-static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned val)
-{
-	edma_write(ctlr, offset + ((i*2 + j) << 2), val);
-}
-static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset);
-}
-static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
-		int i)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
-}
-static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset, val);
-}
-static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
-}
-static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
-		int param_no)
-{
-	return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
-}
-static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
-}
-static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
-}
-static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
-		unsigned and)
-{
-	edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
-}
-static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
-		unsigned or)
-{
-	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
-}
-
-static inline void set_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		set_bit(offset + (len - 1), p);
-}
-
-static inline void clear_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		clear_bit(offset + (len - 1), p);
-}
-
-/*****************************************************************************/
-
-/* actual number of DMA channels and slots on this silicon */
-struct edma {
-	/* how many dma resources of each type */
-	unsigned	num_channels;
-	unsigned	num_region;
-	unsigned	num_slots;
-	unsigned	num_tc;
-	enum dma_event_q 	default_queue;
-
-	/* list of channels with no even trigger; terminated by "-1" */
-	const s8	*noevent;
-
-	struct edma_soc_info *info;
-
-	/* The edma_inuse bit for each PaRAM slot is clear unless the
-	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
-	 */
-	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
-
-	/* The edma_unused bit for each channel is clear unless
-	 * it is not being used on this platform. It uses a bit
-	 * of SOC-specific initialization code.
-	 */
-	DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
-
-	unsigned	irq_res_start;
-	unsigned	irq_res_end;
-
-	struct dma_interrupt_data {
-		void (*callback)(unsigned channel, unsigned short ch_status,
-				void *data);
-		void *data;
-	} intr_data[EDMA_MAX_DMACH];
-};
-
-static struct edma *edma_cc[EDMA_MAX_CC];
-static int arch_num_cc;
-
-/* dummy param set used to (re)initialize parameter RAM slots */
-static const struct edmacc_param dummy_paramset = {
-	.link_bcntrld = 0xffff,
-	.ccnt = 1,
-};
-
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
-/*****************************************************************************/
-
-static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
-		enum dma_event_q queue_no)
-{
-	int bit = (ch_no & 0x7) * 4;
-
-	/* default to low priority queue */
-	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = edma_cc[ctlr]->default_queue;
-
-	queue_no &= 7;
-	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
-			~(0x7 << bit), queue_no << bit);
-}
-
-static void assign_priority_to_queue(unsigned ctlr, int queue_no,
-		int priority)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
-			((priority & 0x7) << bit));
-}
-
-/**
- * map_dmach_param - Maps channel number to param entry number
- *
- * This maps the dma channel number to param entry numberter. In
- * other words using the DMA channel mapping registers a param entry
- * can be mapped to any channel
- *
- * Callers are responsible for ensuring the channel mapping logic is
- * included in that particular EDMA variant (Eg : dm646x)
- *
- */
-static void map_dmach_param(unsigned ctlr)
-{
-	int i;
-	for (i = 0; i < EDMA_MAX_DMACH; i++)
-		edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
-}
-
-static inline void
-setup_dma_interrupt(unsigned lch,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(lch);
-	lch = EDMA_CHAN_SLOT(lch);
-
-	if (!callback)
-		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
-				BIT(lch & 0x1f));
-
-	edma_cc[ctlr]->intr_data[lch].callback = callback;
-	edma_cc[ctlr]->intr_data[lch].data = data;
-
-	if (callback) {
-		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
-				BIT(lch & 0x1f));
-		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
-				BIT(lch & 0x1f));
-	}
-}
-
-static int irq2ctlr(int irq)
-{
-	if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
-		return 0;
-	else if (irq >= edma_cc[1]->irq_res_start &&
-		irq <= edma_cc[1]->irq_res_end)
-		return 1;
-
-	return -1;
-}
-
-/******************************************************************************
- *
- * DMA interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_irq_handler(int irq, void *data)
-{
-	int ctlr;
-	u32 sh_ier;
-	u32 sh_ipr;
-	u32 bank;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_irq_handler\n");
-
-	sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
-	if (!sh_ipr) {
-		sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1);
-		if (!sh_ipr)
-			return IRQ_NONE;
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1);
-		bank = 1;
-	} else {
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0);
-		bank = 0;
-	}
-
-	do {
-		u32 slot;
-		u32 channel;
-
-		dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
-
-		slot = __ffs(sh_ipr);
-		sh_ipr &= ~(BIT(slot));
-
-		if (sh_ier & BIT(slot)) {
-			channel = (bank << 5) | slot;
-			/* Clear the corresponding IPR bits */
-			edma_shadow0_write_array(ctlr, SH_ICR, bank,
-					BIT(slot));
-			if (edma_cc[ctlr]->intr_data[channel].callback)
-				edma_cc[ctlr]->intr_data[channel].callback(
-					channel, EDMA_DMA_COMPLETE,
-					edma_cc[ctlr]->intr_data[channel].data);
-		}
-	} while (sh_ipr);
-
-	edma_shadow0_write(ctlr, SH_IEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
- *
- * DMA error interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_ccerr_handler(int irq, void *data)
-{
-	int i;
-	int ctlr;
-	unsigned int cnt = 0;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_ccerr_handler\n");
-
-	if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-	    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-	    (edma_read(ctlr, EDMA_CCERR) == 0))
-		return IRQ_NONE;
-
-	while (1) {
-		int j = -1;
-		if (edma_read_array(ctlr, EDMA_EMR, 0))
-			j = 0;
-		else if (edma_read_array(ctlr, EDMA_EMR, 1))
-			j = 1;
-		if (j >= 0) {
-			dev_dbg(data, "EMR%d %08x\n", j,
-					edma_read_array(ctlr, EDMA_EMR, j));
-			for (i = 0; i < 32; i++) {
-				int k = (j << 5) + i;
-				if (edma_read_array(ctlr, EDMA_EMR, j) &
-							BIT(i)) {
-					/* Clear the corresponding EMR bits */
-					edma_write_array(ctlr, EDMA_EMCR, j,
-							BIT(i));
-					/* Clear any SER */
-					edma_shadow0_write_array(ctlr, SH_SECR,
-								j, BIT(i));
-					if (edma_cc[ctlr]->intr_data[k].
-								callback) {
-						edma_cc[ctlr]->intr_data[k].
-						callback(k,
-						EDMA_DMA_CC_ERROR,
-						edma_cc[ctlr]->intr_data
-						[k].data);
-					}
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_QEMR)) {
-			dev_dbg(data, "QEMR %02x\n",
-				edma_read(ctlr, EDMA_QEMR));
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_QEMCR, BIT(i));
-					edma_shadow0_write(ctlr, SH_QSECR,
-								BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_CCERR)) {
-			dev_dbg(data, "CCERR %08x\n",
-				edma_read(ctlr, EDMA_CCERR));
-			/* FIXME:  CCERR.BIT(16) ignored!  much better
-			 * to just write CCERRCLR with CCERR value...
-			 */
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_CCERRCLR, BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		}
-		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-		    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-		    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-		    (edma_read(ctlr, EDMA_CCERR) == 0))
-			break;
-		cnt++;
-		if (cnt > 10)
-			break;
-	}
-	edma_write(ctlr, EDMA_EEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-static int reserve_contiguous_slots(int ctlr, unsigned int id,
-				     unsigned int num_slots,
-				     unsigned int start_slot)
-{
-	int i, j;
-	unsigned int count = num_slots;
-	int stop_slot = start_slot;
-	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
-
-	for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
-		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
-			/* Record our current beginning slot */
-			if (count == num_slots)
-				stop_slot = i;
-
-			count--;
-			set_bit(j, tmp_inuse);
-
-			if (count == 0)
-				break;
-		} else {
-			clear_bit(j, tmp_inuse);
-
-			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
-				stop_slot = i;
-				break;
-			} else {
-				count = num_slots;
-			}
-		}
-	}
-
-	/*
-	 * We have to clear any bits that we set
-	 * if we run out parameter RAM slots, i.e we do find a set
-	 * of contiguous parameter RAM slots but do not find the exact number
-	 * requested as we may reach the total number of parameter RAM slots
-	 */
-	if (i == edma_cc[ctlr]->num_slots)
-		stop_slot = i;
-
-	j = start_slot;
-	for_each_set_bit_from(j, tmp_inuse, stop_slot)
-		clear_bit(j, edma_cc[ctlr]->edma_inuse);
-
-	if (count)
-		return -EBUSY;
-
-	for (j = i - num_slots + 1; j <= i; ++j)
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
-}
-
-static int prepare_unused_channel_list(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int i, count, ctlr;
-	struct of_phandle_args  dma_spec;
-
-	if (dev->of_node) {
-		count = of_property_count_strings(dev->of_node, "dma-names");
-		if (count < 0)
-			return 0;
-		for (i = 0; i < count; i++) {
-			if (of_parse_phandle_with_args(dev->of_node, "dmas",
-						       "#dma-cells", i,
-						       &dma_spec))
-				continue;
-
-			if (!of_match_node(edma_of_ids, dma_spec.np)) {
-				of_node_put(dma_spec.np);
-				continue;
-			}
-
-			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
-				  edma_cc[0]->edma_unused);
-			of_node_put(dma_spec.np);
-		}
-		return 0;
-	}
-
-	/* For non-OF case */
-	for (i = 0; i < pdev->num_resources; i++) {
-		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
-				(int)pdev->resource[i].start >= 0) {
-			ctlr = EDMA_CTLR(pdev->resource[i].start);
-			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-				  edma_cc[ctlr]->edma_unused);
-		}
-	}
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------*/
-
-static bool unused_chan_list_done;
-
-/* Resource alloc/free:  dma channels, parameter RAM slots */
-
-/**
- * edma_alloc_channel - allocate DMA channel and paired parameter RAM
- * @channel: specific channel to allocate; negative for "any unmapped channel"
- * @callback: optional; to be issued on DMA completion or errors
- * @data: passed to callback
- * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
- *	Controller (TC) executes requests using this channel.  Use
- *	EVENTQ_DEFAULT unless you really need a high priority queue.
- *
- * This allocates a DMA channel and its associated parameter RAM slot.
- * The parameter RAM is initialized to hold a dummy transfer.
- *
- * Normal use is to pass a specific channel number as @channel, to make
- * use of hardware events mapped to that channel.  When the channel will
- * be used only for software triggering or event chaining, channels not
- * mapped to hardware events (or mapped to unused events) are preferable.
- *
- * DMA transfers start from a channel using edma_start(), or by
- * chaining.  When the transfer described in that channel's parameter RAM
- * slot completes, that slot's data may be reloaded through a link.
- *
- * DMA errors are only reported to the @callback associated with the
- * channel driving that transfer, but transfer completion callbacks can
- * be sent to another channel under control of the TCC field in
- * the option word of the transfer's parameter RAM set.  Drivers must not
- * use DMA transfer completion callbacks for channels they did not allocate.
- * (The same applies to TCC codes used in transfer chaining.)
- *
- * Returns the number of the channel, else negative errno.
- */
-int edma_alloc_channel(int channel,
-		void (*callback)(unsigned channel, u16 ch_status, void *data),
-		void *data,
-		enum dma_event_q eventq_no)
-{
-	unsigned i, done = 0, ctlr = 0;
-	int ret = 0;
-
-	if (!unused_chan_list_done) {
-		/*
-		 * Scan all the platform devices to find out the EDMA channels
-		 * used and clear them in the unused list, making the rest
-		 * available for ARM usage.
-		 */
-		ret = bus_for_each_dev(&platform_bus_type, NULL, NULL,
-				prepare_unused_channel_list);
-		if (ret < 0)
-			return ret;
-
-		unused_chan_list_done = true;
-	}
-
-	if (channel >= 0) {
-		ctlr = EDMA_CTLR(channel);
-		channel = EDMA_CHAN_SLOT(channel);
-	}
-
-	if (channel < 0) {
-		for (i = 0; i < arch_num_cc; i++) {
-			channel = 0;
-			for (;;) {
-				channel = find_next_bit(edma_cc[i]->edma_unused,
-						edma_cc[i]->num_channels,
-						channel);
-				if (channel == edma_cc[i]->num_channels)
-					break;
-				if (!test_and_set_bit(channel,
-						edma_cc[i]->edma_inuse)) {
-					done = 1;
-					ctlr = i;
-					break;
-				}
-				channel++;
-			}
-			if (done)
-				break;
-		}
-		if (!done)
-			return -ENOMEM;
-	} else if (channel >= edma_cc[ctlr]->num_channels) {
-		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	/* ensure access through shadow region 0 */
-	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
-
-	/* ensure no events are pending */
-	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-
-	if (callback)
-		setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
-					callback, data);
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-
-	return EDMA_CTLR_CHAN(ctlr, channel);
-}
-EXPORT_SYMBOL(edma_alloc_channel);
-
-
-/**
- * edma_free_channel - deallocate DMA channel
- * @channel: dma channel returned from edma_alloc_channel()
- *
- * This deallocates the DMA channel and associated parameter RAM slot
- * allocated by edma_alloc_channel().
- *
- * Callers are responsible for ensuring the channel is inactive, and
- * will not be reactivated by linking, chaining, or software calls to
- * edma_start().
- */
-void edma_free_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	setup_dma_interrupt(channel, NULL, NULL);
-	/* REVISIT should probably take out of shadow region 0 */
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_channel);
-
-/**
- * edma_alloc_slot - allocate DMA parameter RAM
- * @slot: specific slot to allocate; negative for "any unused slot"
- *
- * This allocates a parameter RAM slot, initializing it to hold a
- * dummy transfer.  Slots allocated using this routine have not been
- * mapped to a hardware DMA channel, and will normally be used by
- * linking to them from a slot associated with a DMA channel.
- *
- * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
- * slots may be allocated on behalf of DSP firmware.
- *
- * Returns the number of the slot, else negative errno.
- */
-int edma_alloc_slot(unsigned ctlr, int slot)
-{
-	if (!edma_cc[ctlr])
-		return -EINVAL;
-
-	if (slot >= 0)
-		slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < 0) {
-		slot = edma_cc[ctlr]->num_channels;
-		for (;;) {
-			slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse,
-					edma_cc[ctlr]->num_slots, slot);
-			if (slot == edma_cc[ctlr]->num_slots)
-				return -ENOMEM;
-			if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse))
-				break;
-		}
-	} else if (slot < edma_cc[ctlr]->num_channels ||
-			slot >= edma_cc[ctlr]->num_slots) {
-		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, slot);
-}
-EXPORT_SYMBOL(edma_alloc_slot);
-
-/**
- * edma_free_slot - deallocate DMA parameter RAM
- * @slot: parameter RAM slot returned from edma_alloc_slot()
- *
- * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
- * Callers are responsible for ensuring the slot is inactive, and will
- * not be activated.
- */
-void edma_free_slot(unsigned slot)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots)
-		return;
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_slot);
-
-
-/**
- * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
- * The API will return the starting point of a set of
- * contiguous parameter RAM slots that have been requested
- *
- * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
- * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM slots
- * @slot  - the start value of Parameter RAM slot that should be passed if id
- * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- *
- * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAM slots from parameter RAM 64 in the case of
- * DaVinci SOCs and 32 in the case of DA8xx SOCs.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAM slots from the "slot" that is passed as an
- * argument to the API.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "slot"
- * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAM slots from the remaining Parameter
- * RAM slots
- */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
-{
-	/*
-	 * The start slot requested should be greater than
-	 * the number of channels and lesser than the total number
-	 * of slots
-	 */
-	if ((id != EDMA_CONT_PARAMS_ANY) &&
-		(slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots))
-		return -EINVAL;
-
-	/*
-	 * The number of parameter RAM slots requested cannot be less than 1
-	 * and cannot be more than the number of slots minus the number of
-	 * channels
-	 */
-	if (count < 1 || count >
-		(edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
-		return -EINVAL;
-
-	switch (id) {
-	case EDMA_CONT_PARAMS_ANY:
-		return reserve_contiguous_slots(ctlr, id, count,
-						 edma_cc[ctlr]->num_channels);
-	case EDMA_CONT_PARAMS_FIXED_EXACT:
-	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
-		return reserve_contiguous_slots(ctlr, id, count, slot);
-	default:
-		return -EINVAL;
-	}
-
-}
-EXPORT_SYMBOL(edma_alloc_cont_slots);
-
-/**
- * edma_free_cont_slots - deallocate DMA parameter RAM slots
- * @slot: first parameter RAM of a set of parameter RAM slots to be freed
- * @count: the number of contiguous parameter RAM slots to be freed
- *
- * This deallocates the parameter RAM slots allocated by
- * edma_alloc_cont_slots.
- * Callers/applications need to keep track of sets of contiguous
- * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
- * API.
- * Callers are responsible for ensuring the slots are inactive, and will
- * not be activated.
- */
-int edma_free_cont_slots(unsigned slot, int count)
-{
-	unsigned ctlr, slot_to_free;
-	int i;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots ||
-		count < 1)
-		return -EINVAL;
-
-	for (i = slot; i < slot + count; ++i) {
-		ctlr = EDMA_CTLR(i);
-		slot_to_free = EDMA_CHAN_SLOT(i);
-
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
-			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(edma_free_cont_slots);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (i) -- read/write partial slots */
-
-/**
- * edma_set_src - set initial DMA source address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @src_port: physical address of source (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the source address is modified during the DMA transfer
- * according to edma_set_src_index().
- */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set SAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
-		} else {
-			/* clear SAM */
-			i &= ~SAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-
-		/* set the source port address
-		   in source register of param structure */
-		edma_parm_write(ctlr, PARM_SRC, slot, src_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_src);
-
-/**
- * edma_set_dest - set initial DMA destination address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @dest_port: physical address of destination (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the destination address is modified during the DMA transfer
- * according to edma_set_dest_index().
- */
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set DAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
-		} else {
-			/* clear DAM */
-			i &= ~DAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-		/* set the destination port address
-		   in dest register of param structure */
-		edma_parm_write(ctlr, PARM_DST, slot, dest_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest);
-
-/**
- * edma_get_position - returns the current transfer point
- * @slot: parameter RAM slot being examined
- * @dst:  true selects the dest position, false the source
- *
- * Returns the position of the current active slot
- */
-dma_addr_t edma_get_position(unsigned slot, bool dst)
-{
-	u32 offs, ctlr = EDMA_CTLR(slot);
-
-	slot = EDMA_CHAN_SLOT(slot);
-
-	offs = PARM_OFFSET(slot);
-	offs += dst ? PARM_DST : PARM_SRC;
-
-	return edma_read(ctlr, offs);
-}
-
-/**
- * edma_set_src_index - configure DMA source address indexing
- * @slot: parameter RAM slot being configured
- * @src_bidx: byte offset between source arrays in a frame
- * @src_cidx: byte offset between source frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0xffff0000, src_bidx);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0xffff0000, src_cidx);
-	}
-}
-EXPORT_SYMBOL(edma_set_src_index);
-
-/**
- * edma_set_dest_index - configure DMA destination address indexing
- * @slot: parameter RAM slot being configured
- * @dest_bidx: byte offset between destination arrays in a frame
- * @dest_cidx: byte offset between destination frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0x0000ffff, dest_bidx << 16);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0x0000ffff, dest_cidx << 16);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest_index);
-
-/**
- * edma_set_transfer_params - configure DMA transfer parameters
- * @slot: parameter RAM slot being configured
- * @acnt: how many bytes per array (at least one)
- * @bcnt: how many arrays per frame (at least one)
- * @ccnt: how many frames per block (at least one)
- * @bcnt_rld: used only for A-Synchronized transfers; this specifies
- *	the value to reload into bcnt when it decrements to zero
- * @sync_mode: ASYNC or ABSYNC
- *
- * See the EDMA3 documentation to understand how to configure and link
- * transfers using the fields in PaRAM slots.  If you are not doing it
- * all at once with edma_write_slot(), you will use this routine
- * plus two calls each for source and destination, setting the initial
- * address and saying how to index that address.
- *
- * An example of an A-Synchronized transfer is a serial link using a
- * single word shift register.  In that case, @acnt would be equal to
- * that word size; the serial controller issues a DMA synchronization
- * event to transfer each word, and memory access by the DMA transfer
- * controller will be word-at-a-time.
- *
- * An example of an AB-Synchronized transfer is a device using a FIFO.
- * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
- * The controller with the FIFO issues DMA synchronization events when
- * the FIFO threshold is reached, and the DMA transfer controller will
- * transfer one frame to (or from) the FIFO.  It will probably use
- * efficient burst modes to access memory.
- */
-void edma_set_transfer_params(unsigned slot,
-		u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
-				0x0000ffff, bcnt_rld << 16);
-		if (sync_mode == ASYNC)
-			edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
-		else
-			edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
-		/* Set the acount, bcount, ccount registers */
-		edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
-		edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
-	}
-}
-EXPORT_SYMBOL(edma_set_transfer_params);
-
-/**
- * edma_link - link one parameter RAM slot to another
- * @from: parameter RAM slot originating the link
- * @to: parameter RAM slot which is the link target
- *
- * The originating slot should not be part of any active DMA transfer.
- */
-void edma_link(unsigned from, unsigned to)
-{
-	unsigned ctlr_from, ctlr_to;
-
-	ctlr_from = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-	ctlr_to = EDMA_CTLR(to);
-	to = EDMA_CHAN_SLOT(to);
-
-	if (from >= edma_cc[ctlr_from]->num_slots)
-		return;
-	if (to >= edma_cc[ctlr_to]->num_slots)
-		return;
-	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
-				PARM_OFFSET(to));
-}
-EXPORT_SYMBOL(edma_link);
-
-/**
- * edma_unlink - cut link from one parameter RAM slot
- * @from: parameter RAM slot originating the link
- *
- * The originating slot should not be part of any active DMA transfer.
- * Its link is set to 0xffff.
- */
-void edma_unlink(unsigned from)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-
-	if (from >= edma_cc[ctlr]->num_slots)
-		return;
-	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
-}
-EXPORT_SYMBOL(edma_unlink);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (ii) -- read/write whole parameter sets */
-
-/**
- * edma_write_slot - write parameter RAM data for slot
- * @slot: number of parameter RAM slot being modified
- * @param: data to be written into parameter RAM slot
- *
- * Use this to assign all parameters of a transfer at once.  This
- * allows more efficient setup of transfers than issuing multiple
- * calls to set up those parameters in small pieces, and provides
- * complete control over all transfer options.
- */
-void edma_write_slot(unsigned slot, const struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_write_slot);
-
-/**
- * edma_read_slot - read parameter RAM data from slot
- * @slot: number of parameter RAM slot being copied
- * @param: where to store copy of parameter RAM data
- *
- * Use this to read data from a parameter RAM slot, perhaps to
- * save them as a template for later reuse.
- */
-void edma_read_slot(unsigned slot, struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_read_slot);
-
-/*-----------------------------------------------------------------------*/
-
-/* Various EDMA channel control operations */
-
-/**
- * edma_pause - pause dma on a channel
- * @channel: on which edma_start() has been called
- *
- * This temporarily disables EDMA hardware events on the specified channel,
- * preventing them from triggering new transfers on its behalf
- */
-void edma_pause(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_pause);
-
-/**
- * edma_resume - resumes dma on a paused channel
- * @channel: on which edma_pause() has been called
- *
- * This re-enables EDMA hardware events on the specified channel.
- */
-void edma_resume(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_resume);
-
-int edma_trigger_channel(unsigned channel)
-{
-	unsigned ctlr;
-	unsigned int mask;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-	mask = BIT(channel & 0x1f);
-
-	edma_shadow0_write_array(ctlr, SH_ESR, (channel >> 5), mask);
-
-	pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
-		 edma_shadow0_read_array(ctlr, SH_ESR, (channel >> 5)));
-	return 0;
-}
-EXPORT_SYMBOL(edma_trigger_channel);
-
-/**
- * edma_start - start dma on a channel
- * @channel: channel being activated
- *
- * Channels with event associations will be triggered by their hardware
- * events, and channels without such associations will be triggered by
- * software.  (At this writing there is no interface for using software
- * triggers except with channels that don't support hardware triggers.)
- *
- * Returns zero on success, else negative errno.
- */
-int edma_start(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		/* EDMA channels without event association */
-		if (test_bit(channel, edma_cc[ctlr]->edma_unused)) {
-			pr_debug("EDMA: ESR%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_ESR, j));
-			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
-			return 0;
-		}
-
-		/* EDMA channel with event association */
-		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending event or error */
-		edma_write_array(ctlr, EDMA_ECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
-		pr_debug("EDMA: EER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_EER, j));
-		return 0;
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(edma_start);
-
-/**
- * edma_stop - stops dma on the channel passed
- * @channel: channel being deactivated
- *
- * When @lch is a channel, any active transfer is paused and
- * all pending hardware events are cleared.  The current transfer
- * may not be resumed, and the channel's Parameter RAM should be
- * reinitialized before being reused.
- */
-void edma_stop(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-
-		/* clear possibly pending completion interrupt */
-		edma_shadow0_write_array(ctlr, SH_ICR, j, mask);
-
-		pr_debug("EDMA: EER%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_EER, j));
-
-		/* REVISIT:  consider guarding against inappropriate event
-		 * chaining by overwriting with dummy_paramset.
-		 */
-	}
-}
-EXPORT_SYMBOL(edma_stop);
-
-/******************************************************************************
- *
- * It cleans ParamEntry qand bring back EDMA to initial state if media has
- * been removed before EDMA has finished.It is usedful for removable media.
- * Arguments:
- *      ch_no     - channel no
- *
- * Return: zero on success, or corresponding error no on failure
- *
- * FIXME this should not be needed ... edma_stop() should suffice.
- *
- *****************************************************************************/
-
-void edma_clean_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = (channel >> 5);
-		unsigned int mask = BIT(channel & 0x1f);
-
-		pr_debug("EDMA: EMR%d %08x\n", j,
-				edma_read_array(ctlr, EDMA_EMR, j));
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		/* Clear the corresponding EMR bits */
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
-	}
-}
-EXPORT_SYMBOL(edma_clean_channel);
-
-/*
- * edma_clear_event - clear an outstanding event on the DMA channel
- * Arguments:
- *	channel - channel number
- */
-void edma_clear_event(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-	if (channel < 32)
-		edma_write(ctlr, EDMA_ECR, BIT(channel));
-	else
-		edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
-}
-EXPORT_SYMBOL(edma_clear_event);
-
-/*
- * edma_assign_channel_eventq - move given channel to desired eventq
- * Arguments:
- *	channel - channel number
- *	eventq_no - queue to move the channel
- *
- * Can be used to move a channel to a selected event queue.
- */
-void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	/* default to low priority queue */
-	if (eventq_no == EVENTQ_DEFAULT)
-		eventq_no = edma_cc[ctlr]->default_queue;
-	if (eventq_no >= edma_cc[ctlr]->num_tc)
-		return;
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-}
-EXPORT_SYMBOL(edma_assign_channel_eventq);
-
-static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
-			      struct edma *edma_cc, int cc_id)
-{
-	int i;
-	u32 value, cccfg;
-	s8 (*queue_priority_map)[2];
-
-	/* Decode the eDMA3 configuration from CCCFG register */
-	cccfg = edma_read(cc_id, EDMA_CCCFG);
-
-	value = GET_NUM_REGN(cccfg);
-	edma_cc->num_region = BIT(value);
-
-	value = GET_NUM_DMACH(cccfg);
-	edma_cc->num_channels = BIT(value + 1);
-
-	value = GET_NUM_PAENTRY(cccfg);
-	edma_cc->num_slots = BIT(value + 4);
-
-	value = GET_NUM_EVQUE(cccfg);
-	edma_cc->num_tc = value + 1;
-
-	dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id,
-		cccfg);
-	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
-	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
-	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
-	dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
-
-	/* Nothing need to be done if queue priority is provided */
-	if (pdata->queue_priority_mapping)
-		return 0;
-
-	/*
-	 * Configure TC/queue priority as follows:
-	 * Q0 - priority 0
-	 * Q1 - priority 1
-	 * Q2 - priority 2
-	 * ...
-	 * The meaning of priority numbers: 0 highest priority, 7 lowest
-	 * priority. So Q0 is the highest priority queue and the last queue has
-	 * the lowest priority.
-	 */
-	queue_priority_map = devm_kzalloc(dev,
-					  (edma_cc->num_tc + 1) * sizeof(s8),
-					  GFP_KERNEL);
-	if (!queue_priority_map)
-		return -ENOMEM;
-
-	for (i = 0; i < edma_cc->num_tc; i++) {
-		queue_priority_map[i][0] = i;
-		queue_priority_map[i][1] = i;
-	}
-	queue_priority_map[i][0] = -1;
-	queue_priority_map[i][1] = -1;
-
-	pdata->queue_priority_mapping = queue_priority_map;
-	/* Default queue has the lowest priority */
-	pdata->default_queue = i - 1;
-
-	return 0;
-}
-
-#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
-
-static int edma_xbar_event_map(struct device *dev, struct device_node *node,
-			       struct edma_soc_info *pdata, size_t sz)
-{
-	const char pname[] = "ti,edma-xbar-event-map";
-	struct resource res;
-	void __iomem *xbar;
-	s16 (*xbar_chans)[2];
-	size_t nelm = sz / sizeof(s16);
-	u32 shift, offset, mux;
-	int ret, i;
-
-	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
-	if (!xbar_chans)
-		return -ENOMEM;
-
-	ret = of_address_to_resource(node, 1, &res);
-	if (ret)
-		return -ENOMEM;
-
-	xbar = devm_ioremap(dev, res.start, resource_size(&res));
-	if (!xbar)
-		return -ENOMEM;
-
-	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
-	if (ret)
-		return -EIO;
-
-	/* Invalidate last entry for the other user of this mess */
-	nelm >>= 1;
-	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
-
-	for (i = 0; i < nelm; i++) {
-		shift = (xbar_chans[i][1] & 0x03) << 3;
-		offset = xbar_chans[i][1] & 0xfffffffc;
-		mux = readl(xbar + offset);
-		mux &= ~(0xff << shift);
-		mux |= xbar_chans[i][0] << shift;
-		writel(mux, (xbar + offset));
-	}
-
-	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
-	return 0;
-}
-
-static int edma_of_parse_dt(struct device *dev,
-			    struct device_node *node,
-			    struct edma_soc_info *pdata)
-{
-	int ret = 0;
-	struct property *prop;
-	size_t sz;
-	struct edma_rsv_info *rsv_info;
-
-	rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
-	if (!rsv_info)
-		return -ENOMEM;
-	pdata->rsv = rsv_info;
-
-	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
-	if (prop)
-		ret = edma_xbar_event_map(dev, node, pdata, sz);
-
-	return ret;
-}
-
-static struct of_dma_filter_info edma_filter_info = {
-	.filter_fn = edma_filter_fn,
-};
-
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	struct edma_soc_info *info;
-	int ret;
-
-	info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL);
-	if (!info)
-		return ERR_PTR(-ENOMEM);
-
-	ret = edma_of_parse_dt(dev, node, info);
-	if (ret)
-		return ERR_PTR(ret);
-
-	dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
-	dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap);
-	of_dma_controller_register(dev->of_node, of_dma_simple_xlate,
-				   &edma_filter_info);
-
-	return info;
-}
-#else
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	return ERR_PTR(-ENOSYS);
-}
-#endif
-
-static int edma_probe(struct platform_device *pdev)
-{
-	struct edma_soc_info	**info = pdev->dev.platform_data;
-	struct edma_soc_info    *ninfo[EDMA_MAX_CC] = {NULL};
-	s8		(*queue_priority_mapping)[2];
-	int			i, j, off, ln, found = 0;
-	int			status = -1;
-	const s16		(*rsv_chans)[2];
-	const s16		(*rsv_slots)[2];
-	const s16		(*xbar_chans)[2];
-	int			irq[EDMA_MAX_CC] = {0, 0};
-	int			err_irq[EDMA_MAX_CC] = {0, 0};
-	struct resource		*r[EDMA_MAX_CC] = {NULL};
-	struct resource		res[EDMA_MAX_CC];
-	char			res_name[10];
-	struct device_node	*node = pdev->dev.of_node;
-	struct device		*dev = &pdev->dev;
-	int			ret;
-	struct platform_device_info edma_dev_info = {
-		.name = "edma-dma-engine",
-		.dma_mask = DMA_BIT_MASK(32),
-		.parent = &pdev->dev,
-	};
-
-	if (node) {
-		/* Check if this is a second instance registered */
-		if (arch_num_cc) {
-			dev_err(dev, "only one EDMA instance is supported via DT\n");
-			return -ENODEV;
-		}
-
-		ninfo[0] = edma_setup_info_from_dt(dev, node);
-		if (IS_ERR(ninfo[0])) {
-			dev_err(dev, "failed to get DT data\n");
-			return PTR_ERR(ninfo[0]);
-		}
-
-		info = ninfo;
-	}
-
-	if (!info)
-		return -ENODEV;
-
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync() failed\n");
-		return ret;
-	}
-
-	for (j = 0; j < EDMA_MAX_CC; j++) {
-		if (!info[j]) {
-			if (!found)
-				return -ENODEV;
-			break;
-		}
-		if (node) {
-			ret = of_address_to_resource(node, j, &res[j]);
-			if (!ret)
-				r[j] = &res[j];
-		} else {
-			sprintf(res_name, "edma_cc%d", j);
-			r[j] = platform_get_resource_byname(pdev,
-						IORESOURCE_MEM,
-						res_name);
-		}
-		if (!r[j]) {
-			if (found)
-				break;
-			else
-				return -ENODEV;
-		} else {
-			found = 1;
-		}
-
-		edmacc_regs_base[j] = devm_ioremap_resource(&pdev->dev, r[j]);
-		if (IS_ERR(edmacc_regs_base[j]))
-			return PTR_ERR(edmacc_regs_base[j]);
-
-		edma_cc[j] = devm_kzalloc(&pdev->dev, sizeof(struct edma),
-					  GFP_KERNEL);
-		if (!edma_cc[j])
-			return -ENOMEM;
-
-		/* Get eDMA3 configuration from IP */
-		ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j);
-		if (ret)
-			return ret;
-
-		edma_cc[j]->default_queue = info[j]->default_queue;
-
-		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
-			edmacc_regs_base[j]);
-
-		for (i = 0; i < edma_cc[j]->num_slots; i++)
-			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
-					&dummy_paramset, PARM_SIZE);
-
-		/* Mark all channels as unused */
-		memset(edma_cc[j]->edma_unused, 0xff,
-			sizeof(edma_cc[j]->edma_unused));
-
-		if (info[j]->rsv) {
-
-			/* Clear the reserved channels in unused list */
-			rsv_chans = info[j]->rsv->rsv_chans;
-			if (rsv_chans) {
-				for (i = 0; rsv_chans[i][0] != -1; i++) {
-					off = rsv_chans[i][0];
-					ln = rsv_chans[i][1];
-					clear_bits(off, ln,
-						  edma_cc[j]->edma_unused);
-				}
-			}
-
-			/* Set the reserved slots in inuse list */
-			rsv_slots = info[j]->rsv->rsv_slots;
-			if (rsv_slots) {
-				for (i = 0; rsv_slots[i][0] != -1; i++) {
-					off = rsv_slots[i][0];
-					ln = rsv_slots[i][1];
-					set_bits(off, ln,
-						edma_cc[j]->edma_inuse);
-				}
-			}
-		}
-
-		/* Clear the xbar mapped channels in unused list */
-		xbar_chans = info[j]->xbar_chans;
-		if (xbar_chans) {
-			for (i = 0; xbar_chans[i][1] != -1; i++) {
-				off = xbar_chans[i][1];
-				clear_bits(off, 1,
-					   edma_cc[j]->edma_unused);
-			}
-		}
-
-		if (node) {
-			irq[j] = irq_of_parse_and_map(node, 0);
-			err_irq[j] = irq_of_parse_and_map(node, 2);
-		} else {
-			char irq_name[10];
-
-			sprintf(irq_name, "edma%d", j);
-			irq[j] = platform_get_irq_byname(pdev, irq_name);
-
-			sprintf(irq_name, "edma%d_err", j);
-			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		}
-		edma_cc[j]->irq_res_start = irq[j];
-		edma_cc[j]->irq_res_end = err_irq[j];
-
-		status = devm_request_irq(dev, irq[j], dma_irq_handler, 0,
-					  "edma", dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev,
-				"devm_request_irq %d failed --> %d\n",
-				irq[j], status);
-			return status;
-		}
-
-		status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0,
-					  "edma_error", dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev,
-				"devm_request_irq %d failed --> %d\n",
-				err_irq[j], status);
-			return status;
-		}
-
-		for (i = 0; i < edma_cc[j]->num_channels; i++)
-			map_dmach_queue(j, i, info[j]->default_queue);
-
-		queue_priority_mapping = info[j]->queue_priority_mapping;
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						queue_priority_mapping[i][0],
-						queue_priority_mapping[i][1]);
-
-		/* Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < edma_cc[j]->num_region; i++) {
-			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
-			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
-			edma_write_array(j, EDMA_QRAE, i, 0x0);
-		}
-		edma_cc[j]->info = info[j];
-		arch_num_cc++;
-
-		edma_dev_info.id = j;
-		platform_device_register_full(&edma_dev_info);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int edma_pm_resume(struct device *dev)
-{
-	int i, j;
-
-	for (j = 0; j < arch_num_cc; j++) {
-		struct edma *cc = edma_cc[j];
-
-		s8 (*queue_priority_mapping)[2];
-
-		queue_priority_mapping = cc->info->queue_priority_mapping;
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						 queue_priority_mapping[i][0],
-						 queue_priority_mapping[i][1]);
-
-		/*
-		 * Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < cc->num_channels; i++) {
-			if (test_bit(i, cc->edma_inuse)) {
-				/* ensure access through shadow region 0 */
-				edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
-					       BIT(i & 0x1f));
-
-				setup_dma_interrupt(i,
-						    cc->intr_data[i].callback,
-						    cc->intr_data[i].data);
-			}
-		}
-	}
-
-	return 0;
-}
-#endif
-
-static const struct dev_pm_ops edma_pm_ops = {
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, edma_pm_resume)
-};
-
-static struct platform_driver edma_driver = {
-	.driver = {
-		.name	= "edma",
-		.pm	= &edma_pm_ops,
-		.of_match_table = edma_of_ids,
-	},
-	.probe = edma_probe,
-};
-
-static int __init edma_init(void)
-{
-	return platform_driver_probe(&edma_driver, edma_probe);
-}
-arch_initcall(edma_init);
-
diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c
index 2dc6da70a..d7ed25270 100644
--- a/arch/arm/common/icst.c
+++ b/arch/arm/common/icst.c
@@ -16,7 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-
+#include <asm/div64.h>
 #include <asm/hardware/icst.h>
 
 /*
@@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);
 
 unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
 {
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+	u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
+	u32 divisor = (vco.r + 2) * p->s2div[vco.s];
+
+	do_div(dividend, divisor);
+	return (unsigned long)dividend;
 }
 
 EXPORT_SYMBOL(icst_hz);
@@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
 
 		if (f > p->vco_min && f <= p->vco_max)
 			break;
+		i++;
 	} while (i < 8);
 
 	if (i >= 8)
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 5114b68e9..996aed3b4 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -91,11 +91,11 @@ void it8152_init_irq(void)
 	for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) {
 		irq_set_chip_and_handler(irq, &it8152_irq_chip,
 					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 }
 
-void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+void it8152_irq_demux(struct irq_desc *desc)
 {
        int bits_pd, bits_lp, bits_ld;
        int i;
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index b55c3625d..6c7b06854 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -138,9 +138,9 @@ static struct locomo_dev_info locomo_devices[] = {
 	},
 };
 
-static void locomo_handler(unsigned int irq, struct irq_desc *desc)
+static void locomo_handler(struct irq_desc *desc)
 {
-	struct locomo *lchip = irq_get_chip_data(irq);
+	struct locomo *lchip = irq_desc_get_handler_data(desc);
 	int req, i;
 
 	/* Acknowledge the parent IRQ */
@@ -150,6 +150,8 @@ static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 	req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
 
 	if (req) {
+		unsigned int irq;
+
 		/* generate the next interrupt(s) */
 		irq = lchip->irq_base;
 		for (i = 0; i <= 3; i++, irq++) {
@@ -198,14 +200,13 @@ static void locomo_setup_irq(struct locomo *lchip)
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
 	irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-	irq_set_chip_data(lchip->irq, lchip);
-	irq_set_chained_handler(lchip->irq, locomo_handler);
+	irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip);
 
 	/* Install handlers for IRQ_LOCOMO_* */
 	for ( ; irq <= lchip->irq_base + 3; irq++) {
 		irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq);
 		irq_set_chip_data(irq, lchip);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 }
 
@@ -475,8 +476,7 @@ static void __locomo_remove(struct locomo *lchip)
 	device_for_each_child(lchip->dev, NULL, locomo_remove_child);
 
 	if (lchip->irq != NO_IRQ) {
-		irq_set_chained_handler(lchip->irq, NULL);
-		irq_set_handler_data(lchip->irq, NULL);
+		irq_set_chained_handler_and_data(lchip->irq, NULL, NULL);
 	}
 
 	iounmap(lchip->base);
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
index 92e54d7c6..c77315764 100644
--- a/arch/arm/common/mcpm_platsmp.c
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -65,14 +65,10 @@ static int mcpm_cpu_kill(unsigned int cpu)
 	return !mcpm_wait_for_cpu_powerdown(pcpu, pcluster);
 }
 
-static int mcpm_cpu_disable(unsigned int cpu)
+static bool mcpm_cpu_can_disable(unsigned int cpu)
 {
-	/*
-	 * We assume all CPUs may be shut down.
-	 * This would be the hook to use for eventual Secure
-	 * OS migration requests as described in the PSCI spec.
-	 */
-	return 0;
+	/* We assume all CPUs may be shut down. */
+	return true;
 }
 
 static void mcpm_cpu_die(unsigned int cpu)
@@ -87,12 +83,12 @@ static void mcpm_cpu_die(unsigned int cpu)
 
 #endif
 
-static struct smp_operations __initdata mcpm_smp_ops = {
+static const struct smp_operations mcpm_smp_ops __initconst = {
 	.smp_boot_secondary	= mcpm_boot_secondary,
 	.smp_secondary_init	= mcpm_secondary_init,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= mcpm_cpu_kill,
-	.cpu_disable		= mcpm_cpu_disable,
+	.cpu_can_disable	= mcpm_cpu_can_disable,
 	.cpu_die		= mcpm_cpu_die,
 #endif
 };
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 93ee70dbb..2e076c492 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -196,11 +196,10 @@ static struct sa1111_dev_info sa1111_devices[] = {
  * active IRQs causes the interrupt output to pulse, the upper levels
  * will call us again if there are more interrupts to process.
  */
-static void
-sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void sa1111_irq_handler(struct irq_desc *desc)
 {
 	unsigned int stat0, stat1, i;
-	struct sa1111 *sachip = irq_get_handler_data(irq);
+	struct sa1111 *sachip = irq_desc_get_handler_data(desc);
 	void __iomem *mapbase = sachip->base + SA1111_INTC;
 
 	stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
@@ -213,7 +212,7 @@ sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
 	sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
 
 	if (stat0 == 0 && stat1 == 0) {
-		do_bad_IRQ(irq, desc);
+		do_bad_IRQ(desc);
 		return;
 	}
 
@@ -473,8 +472,8 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 	 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
 	 */
 	sa1111_writel(0, irqbase + SA1111_INTPOL0);
-	sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) |
-		      SA1111_IRQMASK_HI(IRQ_S1_READY_NINT),
+	sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) |
+		      BIT(IRQ_S1_READY_NINT & 31),
 		      irqbase + SA1111_INTPOL1);
 
 	/* clear all IRQs */
@@ -486,7 +485,7 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 		irq_set_chip_and_handler(irq, &sa1111_low_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
@@ -494,7 +493,7 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 		irq_set_chip_and_handler(irq, &sa1111_high_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	/*
@@ -755,7 +754,7 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (sachip->irq != NO_IRQ) {
 		ret = sa1111_setup_irq(sachip, pd->irq_base);
 		if (ret)
-			goto err_unmap;
+			goto err_clk;
 	}
 
 #ifdef CONFIG_ARCH_SA1100
@@ -800,6 +799,8 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 
 	return 0;
 
+ err_clk:
+	clk_disable(sachip->clk);
  err_unmap:
 	iounmap(sachip->base);
  err_clk_unprep:
@@ -870,9 +871,9 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
+static int sa1111_suspend_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags;
 	unsigned int val;
@@ -935,9 +936,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct platform_device *dev)
+static int sa1111_resume_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
@@ -953,7 +954,7 @@ static int sa1111_resume(struct platform_device *dev)
 	id = sa1111_readl(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		__sa1111_remove(sachip);
-		platform_set_drvdata(dev, NULL);
+		dev_set_drvdata(dev, NULL);
 		kfree(save);
 		return 0;
 	}
@@ -1004,8 +1005,8 @@ static int sa1111_resume(struct platform_device *dev)
 }
 
 #else
-#define sa1111_suspend NULL
-#define sa1111_resume  NULL
+#define sa1111_suspend_noirq NULL
+#define sa1111_resume_noirq  NULL
 #endif
 
 static int sa1111_probe(struct platform_device *pdev)
@@ -1018,7 +1019,7 @@ static int sa1111_probe(struct platform_device *pdev)
 		return -EINVAL;
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-		return -ENXIO;
+		return irq;
 
 	return __sa1111_probe(&pdev->dev, mem, irq);
 }
@@ -1039,6 +1040,11 @@ static int sa1111_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops sa1111_pm_ops = {
+	.suspend_noirq = sa1111_suspend_noirq,
+	.resume_noirq = sa1111_resume_noirq,
+};
+
 /*
  *	Not sure if this should be on the system bus or not yet.
  *	We really want some way to register a system device at
@@ -1051,10 +1057,9 @@ static int sa1111_remove(struct platform_device *pdev)
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
 	.remove		= sa1111_remove,
-	.suspend	= sa1111_suspend,
-	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.pm	= &sa1111_pm_ops,
 	},
 };
 
@@ -1291,7 +1296,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv)
 	struct sa1111_dev *dev = SA1111_DEV(_dev);
 	struct sa1111_driver *drv = SA1111_DRV(_drv);
 
-	return dev->devid & drv->devid;
+	return !!(dev->devid & drv->devid);
 }
 
 static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 45f4c21e3..9ba45ade5 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -69,7 +69,7 @@ static void __scoop_gpio_set(struct scoop_dev *sdev,
 
 static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	spin_lock_irqsave(&sdev->scoop_lock, flags);
@@ -81,16 +81,16 @@ static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
 
 	/* XXX: I'm unsure, but it seems so */
-	return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
+	return !!(ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)));
 }
 
 static int scoop_gpio_direction_input(struct gpio_chip *chip,
 			unsigned offset)
 {
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
 	unsigned long flags;
 	unsigned short gpcr;
 
@@ -108,7 +108,7 @@ static int scoop_gpio_direction_input(struct gpio_chip *chip,
 static int scoop_gpio_direction_output(struct gpio_chip *chip,
 			unsigned offset, int value)
 {
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
 	unsigned long flags;
 	unsigned short gpcr;
 
@@ -224,7 +224,7 @@ static int scoop_probe(struct platform_device *pdev)
 		devptr->gpio.direction_input = scoop_gpio_direction_input;
 		devptr->gpio.direction_output = scoop_gpio_direction_output;
 
-		ret = gpiochip_add(&devptr->gpio);
+		ret = gpiochip_add_data(&devptr->gpio, devptr);
 		if (ret)
 			goto err_gpio;
 	}
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
deleted file mode 100644
index 5666e3700..000000000
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ /dev/null
@@ -1,162 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_MACH_ARMADILLO800EVA=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_751472=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-CONFIG_SH_ETH=y
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ST1232=y
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9T112=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_SOC_SH4_FSI=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_S35390A=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_PWM=y
-CONFIG_PWM_RENESAS_TPU=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_XZ_DEC=y
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
new file mode 100644
index 000000000..ca39c04fe
--- /dev/null
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -0,0 +1,86 @@
+CONFIG_KERNEL_XZ=y
+CONFIG_SYSVIPC=y
+CONFIG_USELIB=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_BPF_SYSCALL=y
+# CONFIG_SHMEM is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_CC_STACKPROTECTOR_STRONG=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLOCK is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_ASPEED=y
+CONFIG_MACH_ASPEED_G4=y
+CONFIG_DEBUG_RODATA=y
+CONFIG_AEABI=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_SECCOMP=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_KEXEC=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_FANOTIFY=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_PAGE_POISONING=y
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_WQ_WATCHDOG=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHED_STACK_END_CHECK=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
+# CONFIG_FTRACE is not set
+CONFIG_MEMTEST=y
+CONFIG_UBSAN=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0x1e784000
+CONFIG_DEBUG_UART_VIRT=0xe8784000
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_SET_MODULE_RONX=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_SPARC is not set
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
new file mode 100644
index 000000000..4f366b037
--- /dev/null
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -0,0 +1,88 @@
+CONFIG_KERNEL_XZ=y
+CONFIG_SYSVIPC=y
+CONFIG_USELIB=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_BPF_SYSCALL=y
+# CONFIG_SHMEM is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_CC_STACKPROTECTOR_STRONG=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLOCK is not set
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_ASPEED=y
+CONFIG_MACH_ASPEED_G5=y
+CONFIG_DEBUG_RODATA=y
+CONFIG_AEABI=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_SECCOMP=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_KEXEC=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_FANOTIFY=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_PAGE_POISONING=y
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_WQ_WATCHDOG=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHED_STACK_END_CHECK=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
+# CONFIG_FTRACE is not set
+CONFIG_MEMTEST=y
+CONFIG_UBSAN=y
+CONFIG_UBSAN_ALIGNMENT=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0x1e784000
+CONFIG_DEBUG_UART_VIRT=0xe8784000
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_SET_MODULE_RONX=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_SPARC is not set
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 94b5dcabd..e4b1be66b 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -17,7 +17,6 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_SOC_SAM_V4_V5=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_AEABI=y
@@ -28,7 +27,6 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -43,7 +41,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
@@ -73,7 +70,6 @@ CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_ARM_AT91_ETHER=y
 CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_DM9000=y
@@ -120,7 +116,6 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
 CONFIG_I2C_AT91=y
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
@@ -130,18 +125,24 @@ CONFIG_POWER_RESET=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_SSB=m
+CONFIG_MFD_ATMEL_HLCDC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_FB=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_DRM=y
+CONFIG_DRM_ATMEL_HLCDC=y
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
 # CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -186,6 +187,7 @@ CONFIG_IIO=y
 CONFIG_AT91_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
+CONFIG_PWM_ATMEL_HLCDC_PWM=y
 CONFIG_PWM_ATMEL_TCB=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
@@ -205,18 +207,11 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=m
-CONFIG_AVERAGE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_ACORN_8x8=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 31cb07388..79de828e4 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -6,22 +6,17 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_PERF=y
-CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_XZ=y
-CONFIG_RD_LZO=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
@@ -29,8 +24,8 @@ CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_JUMP_LABEL=y
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
 CONFIG_ARCH_MULTI_V6=y
-# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -38,16 +33,18 @@ CONFIG_AEABI=y
 CONFIG_KSM=y
 CONFIG_CLEANCACHE=y
 CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
 CONFIG_VFP=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_SUSPEND is not set
+CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 CONFIG_CFG80211=y
@@ -57,7 +54,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
@@ -70,24 +66,34 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_TTY_PRINTK=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BCM2835=y
 CONFIG_SPI=y
 CONFIG_SPI_BCM2835=y
+CONFIG_SPI_BCM2835AUX=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-CONFIG_FB=y
+CONFIG_WATCHDOG=y
+CONFIG_BCM2835_WDT=y
+CONFIG_DRM=y
+CONFIG_DRM_VC4=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC2=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_MMC_SDHCI_IPROC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -96,17 +102,21 @@ CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=y
 CONFIG_STAGING=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
+CONFIG_MAILBOX=y
+CONFIG_BCM2835_MBOX=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
@@ -114,6 +124,7 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
@@ -135,7 +146,5 @@ CONFIG_TEST_KSTRTOX=y
 CONFIG_KGDB=y
 CONFIG_KGDB_KDB=y
 CONFIG_STRICT_DEVMEM=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
 # CONFIG_XZ_DEC_ARM is not set
 # CONFIG_XZ_DEC_ARMTHUMB is not set
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
deleted file mode 100644
index 7117662ba..000000000
--- a/arch/arm/configs/bcm_defconfig
+++ /dev/null
@@ -1,142 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_21664=y
-CONFIG_ARCH_BCM_281XX=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_SMP=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_COMPACTION is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 mem=128M"
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_DIAG=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_SYN_COOKIES=y
-CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_BLK_DEV is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_BCM590XX=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_BCM590XX=y
-
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_TEST=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_BCM_KONA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_PWM=y
-CONFIG_PWM_BCM_KONA=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-# CONFIG_FTRACE is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_XZ_DEC=y
-CONFIG_AVERAGE=y
-CONFIG_PINCTRL_BCM281XX=y
-CONFIG_WATCHDOG=y
-CONFIG_BCM_KONA_WDT=y
-CONFIG_BCM_KONA_WDT_DEBUG=y
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
deleted file mode 100644
index 3125e00f0..000000000
--- a/arch/arm/configs/bockw_defconfig
+++ /dev/null
@@ -1,133 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_KERNEL_LZMA=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_MACH_BOCKW=y
-CONFIG_MEMORY_START=0x60000000
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_SHMOBILE_TIMER_HZ=1024
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_EM_TIMER_STI is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_I2C=y
-CONFIG_I2C_RCAR=y
-CONFIG_GPIO_RCAR=y
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_RCAR_VIN=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_VIDEO_ML86V7667=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_HSPI=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_RCAR=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_RCAR_PHY=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_DMADEVICES=y
-CONFIG_RCAR_HPB_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_SWAP=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_AVERAGE=y
diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
index dc01c049a..3b32d5fd9 100644
--- a/arch/arm/configs/cm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -157,7 +157,7 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_V3020=y
-CONFIG_RTC_DRV_SA1100=y
+CONFIG_RTC_DRV_PXA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_INOTIFY=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 18c311ae1..0b9211b2b 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -166,7 +166,6 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA1=m
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 6c56ad086..52dbad561 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -76,7 +76,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LOCOMO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_DISK=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 235842c9b..f33d042b1 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -2,6 +2,7 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -70,8 +71,10 @@ CONFIG_MTD_CFI=m
 CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_M25P80=m
 CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_DAVINCI=m
+CONFIG_MTD_SPI_NOR=m
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
@@ -117,7 +120,10 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
+CONFIG_SPI=y
+CONFIG_SPI_DAVINCI=m
 CONFIG_PINCTRL_SINGLE=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=m
@@ -187,7 +193,6 @@ CONFIG_TI_EDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
 CONFIG_AUTOFS4_FS=m
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/dram_0x00000000.config b/arch/arm/configs/dram_0x00000000.config
new file mode 100644
index 000000000..db96dcb42
--- /dev/null
+++ b/arch/arm/configs/dram_0x00000000.config
@@ -0,0 +1 @@
+CONFIG_DRAM_BASE=0x00000000
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
index 4560c9ca6..8e10df7ba 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -157,7 +157,7 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_V3020=y
-CONFIG_RTC_DRV_SA1100=y
+CONFIG_RTC_DRV_PXA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_INOTIFY=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 72233b9c9..158dde87f 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,4 +1,6 @@
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -15,19 +17,25 @@ CONFIG_CRUNCH=y
 CONFIG_MACH_ADSSPHERE=y
 CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9302A=y
 CONFIG_MACH_EDB9307=y
+CONFIG_MACH_EDB9307A=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
+CONFIG_MACH_EDB9315A=y
 CONFIG_MACH_GESBC9312=y
 CONFIG_MACH_MICRO9H=y
+CONFIG_MACH_MICRO9M=y
 CONFIG_MACH_MICRO9L=y
+CONFIG_MACH_MICRO9S=y
+CONFIG_MACH_SIM_ONE=y
+CONFIG_MACH_SNAPPER_CL15=y
 CONFIG_MACH_TS72XX=y
+CONFIG_MACH_VISION_EP9307=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -74,11 +82,18 @@ CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
+CONFIG_SPI=y
+CONFIG_SPI_EP93XX=y
 CONFIG_WATCHDOG=y
 CONFIG_EP93XX_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_EP93XX=y
+CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_OHCI_HCD=y
@@ -87,13 +102,23 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
 CONFIG_USB_SERIAL_PL2303=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_M48T86=y
 CONFIG_RTC_DRV_EP93XX=y
+CONFIG_DMADEVICES=y
+CONFIG_EP93XX_DMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
@@ -107,6 +132,5 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_PL01X=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 9504e7790..01986deef 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -1,5 +1,4 @@
 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
@@ -7,15 +6,12 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_EXYNOS3=y
 CONFIG_EXYNOS5420_MCPM=y
 CONFIG_SMP=y
 CONFIG_BIG_LITTLE=y
-CONFIG_BL_SWITCHER=y
-CONFIG_BL_SWITCHER_DUMMY_IF=y
 CONFIG_NR_CPUS=8
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -27,10 +23,18 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
 CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=m
+CONFIG_CPUFREQ_DT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_EXYNOS_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -42,7 +46,6 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_CFG80211=y
 CONFIG_RFKILL_REGULATOR=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
@@ -59,11 +62,12 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=m
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
+CONFIG_USB_RTL8152=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
-CONFIG_MWIFIEX=y
-CONFIG_MWIFIEX_SDIO=y
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_CROS_EC=y
@@ -71,10 +75,15 @@ CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_CYAPA=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_MMS114=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MAX77693_HAPTIC=y
+CONFIG_INPUT_MAX8997_HAPTIC=y
+CONFIG_KEYBOARD_SAMSUNG=y
 CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_HW_RANDOM=y
 CONFIG_TCG_TPM=y
 CONFIG_TCG_TIS_I2C_INFINEON=y
@@ -84,22 +93,24 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
 CONFIG_SPI_S3C64XX=y
 CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_WM8994=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_BATTERY_SBS=y
 CONFIG_BATTERY_MAX17040=y
 CONFIG_BATTERY_MAX17042=y
 CONFIG_CHARGER_MAX14577=y
 CONFIG_CHARGER_MAX77693=y
+CONFIG_CHARGER_MAX8997=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_NTC_THERMISTOR=y
 CONFIG_SENSORS_PWM_FAN=y
 CONFIG_SENSORS_INA2XX=y
-CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
-CONFIG_EXYNOS_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MFD_CROS_EC=y
@@ -109,6 +120,7 @@ CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8997=y
+CONFIG_MFD_MAX8998=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_TPS65090=y
 CONFIG_REGULATOR=y
@@ -116,6 +128,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MAX14577=y
 CONFIG_REGULATOR_MAX8997=y
+CONFIG_REGULATOR_MAX8998=y
 CONFIG_REGULATOR_MAX77686=y
 CONFIG_REGULATOR_MAX77693=y
 CONFIG_REGULATOR_MAX77802=y
@@ -123,16 +136,35 @@ CONFIG_REGULATOR_S2MPA01=y
 CONFIG_REGULATOR_S2MPS11=y
 CONFIG_REGULATOR_S5M8767=y
 CONFIG_REGULATOR_TPS65090=y
+CONFIG_REGULATOR_WM8994=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
+CONFIG_VIDEO_S5P_FIMC=m
+CONFIG_VIDEO_S5P_MIPI_CSIS=m
+CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
+CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_DRM=y
-CONFIG_DRM_PTN3460=y
-CONFIG_DRM_PS8622=y
 CONFIG_DRM_EXYNOS=y
 CONFIG_DRM_EXYNOS_FIMD=y
+CONFIG_DRM_EXYNOS_MIXER=y
+CONFIG_DRM_EXYNOS_DPI=y
 CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DRM_PANEL_S6E8AA0=y
-CONFIG_FB_SIMPLE=y
+CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
+CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
+CONFIG_DRM_NXP_PTN3460=y
+CONFIG_DRM_PARADE_PS8622=y
 CONFIG_EXYNOS_VIDEO=y
 CONFIG_EXYNOS_MIPI_DSI=y
 CONFIG_LCD_CLASS_DEVICE=y
@@ -143,7 +175,10 @@ CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_SAMSUNG=y
+CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y
+CONFIG_SND_SOC_SMDK_WM8994_PCM=y
 CONFIG_SND_SOC_SNOW=y
+CONFIG_SND_SIMPLE_CARD=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_XHCI_HCD=y
@@ -153,24 +188,33 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S3C=y
 CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_MAX77693=y
+CONFIG_LEDS_MAX8997=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX8997=y
 CONFIG_RTC_DRV_MAX77686=y
-CONFIG_RTC_DRV_MAX77802=y
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
-CONFIG_CHROME_PLATFORMS=y
 CONFIG_CROS_EC_CHARDEV=y
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_MAX77802=y
@@ -178,14 +222,17 @@ CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_EXTCON=y
 CONFIG_EXTCON_MAX14577=y
 CONFIG_EXTCON_MAX77693=y
+CONFIG_EXTCON_MAX8997=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
+CONFIG_CM36651=y
+CONFIG_AK8975=y
 CONFIG_PWM=y
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PHY_EXYNOS5250_SATA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -193,6 +240,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
@@ -207,7 +255,13 @@ CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_DEV_S5P=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRC_CCITT=y
 CONFIG_FONTS=y
 CONFIG_FONT_7x14=y
+CONFIG_VIDEO_VIVID=m
diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
index 5997dbc69..b2e340b27 100644
--- a/arch/arm/configs/hisi_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -69,7 +69,6 @@ CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 CONFIG_RTC_CLASS=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_PLTFM=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_DMADEVICES=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index d3a801863..9083399a8 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -6,6 +6,7 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
@@ -24,14 +25,12 @@ CONFIG_ARCH_MXC=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_EUKREA_CPUIMX25SD=y
-CONFIG_SOC_IMX25=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_PCA100=y
-CONFIG_MACH_MXT_TD60=y
 CONFIG_MACH_IMX27_DT=y
+CONFIG_SOC_IMX25=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -88,6 +87,7 @@ CONFIG_KEYBOARD_IMX=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_MX25=y
 CONFIG_TOUCHSCREEN_MC13783=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
@@ -107,6 +107,7 @@ CONFIG_HWMON=m
 CONFIG_SENSORS_MC13783_ADC=m
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
+CONFIG_MFD_MX25_TSADC=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -169,11 +170,11 @@ CONFIG_RTC_DRV_IMXDI=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
-CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
+CONFIG_IMX_SDMA=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_IIO=y
+CONFIG_FSL_MX25_ADC=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
@@ -187,6 +188,5 @@ CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index b47863d49..3219480b9 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -3,6 +3,8 @@ CONFIG_SYSVIPC=y
 CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CGROUPS=y
 CONFIG_RELAY=y
@@ -38,25 +40,27 @@ CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
 CONFIG_SOC_IMX6SX=y
+CONFIG_SOC_IMX6UL=y
 CONFIG_SOC_IMX7D=y
 CONFIG_SOC_VF610=y
-CONFIG_SOC_LS1021A=y
 CONFIG_PCI=y
+CONFIG_PCI_MSI=y
 CONFIG_PCI_IMX6=y
 CONFIG_SMP=y
-CONFIG_VMSPLIT_2G=y
+CONFIG_ARM_PSCI=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CMA=y
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_TEST_SUSPEND=y
 CONFIG_NET=y
@@ -69,14 +73,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
 CONFIG_NETFILTER=y
 CONFIG_CAN=y
 CONFIG_CAN_FLEXCAN=y
 CONFIG_BT=y
 CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIUART_3WIRE=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_RFKILL=y
@@ -101,10 +104,13 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
@@ -136,13 +142,13 @@ CONFIG_SMC911X=y
 CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_AT803X_PHY=y
+CONFIG_MICREL_PHY=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=m
-CONFIG_USB_USBNET=m
+CONFIG_USB_USBNET=y
 CONFIG_USB_NET_CDC_EEM=m
 CONFIG_BRCMFMAC=m
-CONFIG_WL_TI=y
 CONFIG_WL12XX=m
 CONFIG_WLCORE_SDIO=m
 # CONFIG_WILINK_PLATFORM_DATA is not set
@@ -150,15 +156,21 @@ CONFIG_WLCORE_SDIO=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_SNVS_PWRKEY=y
 CONFIG_KEYBOARD_IMX=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
 CONFIG_TOUCHSCREEN_MC13783=y
+CONFIG_TOUCHSCREEN_TSC2004=y
 CONFIG_TOUCHSCREEN_TSC2007=y
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_TOUCHSCREEN_SX8654=y
+CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
 CONFIG_SERIO_SERPORT=m
@@ -168,15 +180,17 @@ CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_HW_RANDOM=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_GPIO=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
+CONFIG_SPI_FSL_DSPI=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y
 CONFIG_GPIO_PCA953X=y
@@ -185,7 +199,9 @@ CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_IMX=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
@@ -219,10 +235,16 @@ CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
+CONFIG_DRM_IMX=y
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_LDB=y
+CONFIG_DRM_IMX_HDMI=y
+CONFIG_FB_MXS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
-CONFIG_FB_MXS=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -231,7 +253,7 @@ CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_FSL_SAI=y
+CONFIG_SND_SOC_FSL_ASRC=y
 CONFIG_SND_IMX_SOC=y
 CONFIG_SND_SOC_PHYCORE_AC97=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
@@ -239,6 +261,8 @@ CONFIG_SND_SOC_IMX_WM8962=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_IMX_SPDIF=y
 CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_SND_SOC_FSL_ASOC_CARD=y
+CONFIG_SND_SOC_CS42XX8_I2C=y
 CONFIG_SND_SOC_TLV320AIC3X=y
 CONFIG_SND_SIMPLE_CARD=y
 CONFIG_USB=y
@@ -256,6 +280,7 @@ CONFIG_USB_EHSET_TEST_FIXTURE=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
 CONFIG_USB_CONFIGFS=m
 CONFIG_USB_CONFIGFS_SERIAL=y
 CONFIG_USB_CONFIGFS_ACM=y
@@ -272,6 +297,7 @@ CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_G_NCM=m
 CONFIG_USB_GADGETFS=m
+CONFIG_USB_FUNCTIONFS=m
 CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
@@ -281,6 +307,7 @@ CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
@@ -293,24 +320,23 @@ CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8523=y
 CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_SNVS=y
 CONFIG_DMADEVICES=y
+CONFIG_FSL_EDMA=y
 CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
-CONFIG_FSL_EDMA=y
 CONFIG_STAGING=y
-CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_FB_HELPER=y
-CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
-CONFIG_DRM_IMX_TVE=y
-CONFIG_DRM_IMX_LDB=y
-CONFIG_DRM_IMX_IPUV3=y
-CONFIG_DRM_IMX_HDMI=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_VF610_ADC=y
 CONFIG_PWM=y
+CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_IMX_OCOTP=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -318,9 +344,6 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -354,8 +377,8 @@ CONFIG_PROVE_LOCKING=y
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_SECURITYFS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_SAHARA=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC7=m
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 4fa94a1f1..652b7bd9e 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -95,7 +95,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS=y
 CONFIG_DEBUG_USER=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index c3058da63..aa3af0a6b 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -108,7 +108,6 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 24636cfdf..cf4918a2c 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -180,7 +180,7 @@ CONFIG_LEDS_FSG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_ISL1208=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 95ce1284b..78cd2f197 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -4,6 +4,12 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS_ALL=y
@@ -24,9 +30,12 @@ CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_KEYSTONE=y
 CONFIG_SMP=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_ARM_PSCI=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
+CONFIG_CMA=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_SUSPEND is not set
@@ -57,7 +66,6 @@ CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_INET_AH=y
 CONFIG_INET_IPCOMP=y
-CONFIG_IPV6=y
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
@@ -93,7 +101,6 @@ CONFIG_IP_NF_MATCH_ECN=y
 CONFIG_IP_NF_MATCH_TTL=y
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_ULOG=y
 CONFIG_IP_NF_MANGLE=y
 CONFIG_IP_NF_TARGET_CLUSTERIP=y
 CONFIG_IP_NF_TARGET_ECN=y
@@ -106,7 +113,8 @@ CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP_SCTP=y
 CONFIG_VLAN_8021Q=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CMA=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -117,7 +125,6 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
-CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
@@ -125,7 +132,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_TI_KEYSTONE_NETCP=y
 CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
-CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
@@ -137,12 +144,16 @@ CONFIG_I2C_DAVINCI=y
 CONFIG_SPI=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
-# CONFIG_HWMON is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DAVINCI=y
+CONFIG_GPIO_SYSCON=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_KEYSTONE=y
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_CORE=y
 CONFIG_DAVINCI_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -150,9 +161,16 @@ CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_DEBUG=y
-CONFIG_USB_DWC3_VERBOSE=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
 CONFIG_SOC_TI=y
@@ -160,8 +178,11 @@ CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
 CONFIG_KEYSTONE_NAVIGATOR_DMA=y
 CONFIG_MEMORY=y
 CONFIG_TI_AEMIF=y
+CONFIG_KEYSTONE_IRQ=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
@@ -179,11 +200,10 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_SHIRQ=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_USER=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_AUTHENC=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=y
@@ -192,19 +212,3 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_USER_API_SKCIPHER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_DAVINCI=y
-CONFIG_LEDS_CLASS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_KEYSTONE_IRQ=y
-CONFIG_GPIO_SYSCON=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DEVTMPFS=y
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
deleted file mode 100644
index 23e8d146d..000000000
--- a/arch/arm/configs/kzm9g_defconfig
+++ /dev/null
@@ -1,154 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_KZM9G=y
-CONFIG_MEMORY_START=0x41000000
-CONFIG_MEMORY_SIZE=0x1f000000
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_SCHED_MC=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_SH_IRDA=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ST1232=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_ADXL34X=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_PCF857X=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_AS3711=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AS3711=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_BACKLIGHT_AS3711=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_FB_SH_MOBILE_MERAM=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_SH4_FSI=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_ASYNC_TX_DMA=y
-CONFIG_STAGING=y
-CONFIG_IIO=y
-CONFIG_AK8975=y
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRC16=y
diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
index 1c47f86c3..2de1bf0e4 100644
--- a/arch/arm/configs/lpc18xx_defconfig
+++ b/arch/arm/configs/lpc18xx_defconfig
@@ -52,15 +52,22 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_SPI_NXP_SPIFI=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_SRAM=y
 CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
@@ -102,14 +109,17 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
+CONFIG_I2C_LPC2K=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
+CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_74XX_MMIO=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_SENSORS_JC42=y
 CONFIG_SENSORS_LM75=y
 CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_MFD_SYSCON=y
+CONFIG_LPC18XX_WATCHDOG=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
@@ -117,9 +127,10 @@ CONFIG_FB_ARMCLCD=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_PCA9532=y
@@ -128,12 +139,27 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_LPC24XX=y
 CONFIG_DMADEVICES=y
 CONFIG_AMBA_PL08X=y
+CONFIG_LPC18XX_DMAMUX=y
+CONFIG_MEMORY=y
+CONFIG_ARM_PL172_MPMC=y
+CONFIG_PWM=y
+CONFIG_PWM_LPC18XX_SCT=y
+CONFIG_IIO=y
+CONFIG_MMA7455_I2C=y
+CONFIG_LPC18XX_ADC=y
+CONFIG_LPC18XX_DAC=y
+CONFIG_IIO_SYSFS_TRIGGER=y
+CONFIG_PHY_LPC18XX_USB_OTG=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_LPC18XX_EEPROM=y
 CONFIG_EXT2_FS=y
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
+CONFIG_JFFS2_FS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
@@ -143,8 +169,6 @@ CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_INFO is not set
-# CONFIG_FTRACE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRC_ITU_T=y
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index c100b7df5..6ba430d2b 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -17,8 +17,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_LPC32XX=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -27,10 +25,8 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
 CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
 CONFIG_VFP=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_AOUT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -42,10 +38,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
@@ -53,9 +46,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_SLC_LPC32XX=y
 CONFIG_MTD_NAND_MLC_LPC32XX=y
@@ -70,7 +61,6 @@ CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -91,6 +81,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
 CONFIG_KEYBOARD_LPC32XX=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
@@ -99,8 +90,8 @@ CONFIG_SERIO_LIBPS2=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_HS_LPC32XX=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_HS_LPC32XX=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -108,19 +99,20 @@ CONFIG_I2C_PNX=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_GPIO_EM=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_GPIO_PL061=y
+CONFIG_GPIO_ADP5588=y
+CONFIG_GPIO_ADNP=y
 CONFIG_GPIO_MAX7300=y
 CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_SX150X=y
-CONFIG_GPIO_ADP5588=y
-CONFIG_GPIO_ADNP=y
+CONFIG_GPIO_74X164=y
 CONFIG_GPIO_MAX7301=y
-CONFIG_GPIO_MCP23S08=y
 CONFIG_GPIO_MC33880=y
-CONFIG_GPIO_74X164=y
+CONFIG_GPIO_MCP23S08=y
 CONFIG_SENSORS_DS620=y
 CONFIG_SENSORS_MAX6639=y
 CONFIG_WATCHDOG=y
@@ -147,7 +139,6 @@ CONFIG_SND_DEBUG_VERBOSE=y
 # CONFIG_SND_SPI is not set
 CONFIG_SND_SOC=y
 CONFIG_USB=y
-CONFIG_USB_PHY=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
@@ -179,6 +170,8 @@ CONFIG_DMADEVICES=y
 CONFIG_AMBA_PL08X=y
 CONFIG_STAGING=y
 CONFIG_LPC32XX_ADC=y
+CONFIG_MEMORY=y
+CONFIG_ARM_PL172_MPMC=y
 CONFIG_IIO=y
 CONFIG_MAX517=y
 CONFIG_PWM=y
@@ -198,13 +191,12 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_INFO=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 557dd2912..a5b4920cd 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -150,7 +150,7 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DEBUG=y
-CONFIG_RTC_DRV_SA1100=y
+CONFIG_RTC_DRV_PXA=y
 CONFIG_EXT2_FS=y
 CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=m
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
deleted file mode 100644
index 3c8b6d823..000000000
--- a/arch/arm/configs/marzen_defconfig
+++ /dev/null
@@ -1,124 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_KERNEL_LZMA=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7779=y
-CONFIG_MACH_MARZEN=y
-CONFIG_MEMORY_START=0x60000000
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_SHMOBILE_TIMER_HZ=1024
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SWP_EMULATE is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_SMP=y
-# CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_ATA_SFF=y
-CONFIG_ATA_BMDMA=y
-CONFIG_SATA_RCAR=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_RCAR=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_HSPI=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_RCAR=y
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_RCAR_THERMAL=y
-CONFIG_SSB=y
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_RCAR_VIN=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_VIDEO_ADV7180=y
-CONFIG_DRM=y
-CONFIG_DRM_RCAR_DU=y
-CONFIG_USB=y
-CONFIG_USB_RCAR_PHY=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_DMADEVICES=y
-CONFIG_RCAR_HPB_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_AVERAGE=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 9c93f5655..0b02e4f43 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -158,6 +158,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
+CONFIG_EEPROM_AT24=y
 CONFIG_SPI=y
 CONFIG_SPI_S3C24XX=y
 CONFIG_SPI_SPIDEV=y
diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
new file mode 100644
index 000000000..19d119f5b
--- /dev/null
+++ b/arch/arm/configs/mps2_defconfig
@@ -0,0 +1,109 @@
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
+# CONFIG_UID16 is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_BLOCK is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_MPS2=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x21000000
+CONFIG_DRAM_SIZE=0x1000000
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CORE is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_MPS2_UART_CONSOLE=y
+CONFIG_SERIAL_MPS2_UART=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_MEMTEST=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
new file mode 100644
index 000000000..433eebb41
--- /dev/null
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -0,0 +1,106 @@
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_SLOB=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_LBDAF is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91RM9200=y
+CONFIG_ARCH_CLPS711X=y
+CONFIG_ARCH_INTEGRATOR=y
+CONFIG_ARCH_INTEGRATOR_AP=y
+CONFIG_INTEGRATOR_IMPD1=y
+CONFIG_INTEGRATOR_CM720T=y
+CONFIG_INTEGRATOR_CM920T=y
+CONFIG_INTEGRATOR_CM922T_XA10=y
+CONFIG_ARCH_MXC=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
+CONFIG_MACH_IMX1_DT=y
+CONFIG_ARCH_NSPIRE=y
+CONFIG_AEABI=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_CLPS711X_CPUIDLE=y
+# CONFIG_COREDUMP is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPIO=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_CLPS711X=y
+CONFIG_SERIAL_CLPS711X_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_CLPS711X=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_IMX=y
+CONFIG_PINCTRL_AT91PIO4=y
+CONFIG_GPIO_74XX_MMIO=y
+CONFIG_GPIO_CLPS711X=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_SYSCON=y
+CONFIG_W1=y
+CONFIG_W1_MASTER_MXC=y
+CONFIG_W1_MASTER_GPIO=y
+CONFIG_POWER_RESET_AT91_POWEROFF=y
+CONFIG_POWER_RESET_AT91_RESET=y
+CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_FB=y
+CONFIG_FB_CLPS711X=y
+CONFIG_FB_IMX=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=y
+CONFIG_PWM_CLPS711X=y
+CONFIG_PWM_IMX=y
+CONFIG_EXT2_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index f69a459f4..2658b80fa 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -1,20 +1,53 @@
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_NETXBIG=y
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9=y
+CONFIG_ARCH_ASPEED=y
+CONFIG_MACH_ASPEED_G4=y
 CONFIG_ARCH_MXC=y
-CONFIG_SOC_IMX25=y
+CONFIG_MACH_MX21ADS=y
+CONFIG_MACH_MX27ADS=y
+CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_IMX27_VISSTRIM_M10=y
+CONFIG_MACH_PCA100=y
 CONFIG_MACH_IMX27_DT=y
+CONFIG_SOC_IMX25=y
+CONFIG_ARCH_ORION5X=y
+CONFIG_MACH_DB88F5281=y
+CONFIG_MACH_RD88F5182=y
+CONFIG_MACH_RD88F5182_DT=y
+CONFIG_MACH_KUROBOX_PRO=y
+CONFIG_MACH_DNS323=y
+CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
+CONFIG_MACH_LINKSTATION_PRO=y
+CONFIG_MACH_LINKSTATION_LSCHL=y
+CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
+CONFIG_MACH_TS409=y
+CONFIG_MACH_WRT350N_V2=y
+CONFIG_MACH_TS78XX=y
+CONFIG_MACH_MV2120=y
+CONFIG_MACH_D2NET_DT=y
+CONFIG_MACH_NET2BIG=y
+CONFIG_MACH_MSS2_DT=y
+CONFIG_MACH_WNR854T=y
+CONFIG_MACH_RD88F5181L_GE=y
+CONFIG_MACH_RD88F5181L_FXO=y
+CONFIG_MACH_RD88F6183AP_GE=y
 CONFIG_ARCH_U300=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y
@@ -37,11 +70,15 @@ CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_IMX_WEIM=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -53,10 +90,13 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_SSC=m
 CONFIG_EEPROM_AT24=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -66,33 +106,51 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
-CONFIG_NET_DSA_MV88E6171=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_MACB=y
+CONFIG_DM9000=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
-CONFIG_MWL8K=m
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
+CONFIG_MWL8K=m
 CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_QT1070=m
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_TTYAT=y
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_AT91=y
+CONFIG_I2C_IMX=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_IMX=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
@@ -103,19 +161,37 @@ CONFIG_SENSORS_LM75=y
 CONFIG_SENSORS_LM85=y
 CONFIG_THERMAL=y
 CONFIG_KIRKWOOD_THERMAL=y
-CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_ATMEL_HLCDC=y
+# CONFIG_ABX500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_ATMEL_ISI=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_DRM=y
+CONFIG_DRM_ATMEL_HLCDC=m
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_FB=y
+CONFIG_FB_IMX=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_AT91_SOC_SAM9G20_WM8731=m
+CONFIG_SND_ATMEL_SOC_WM8904=m
+CONFIG_SND_AT91_SOC_SAM9X5_WM8731=m
 CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_T5325=y
 CONFIG_SND_SOC_ALC5623=y
+CONFIG_SND_SOC_WM8731=y
 CONFIG_SND_SIMPLE_CARD=y
-# CONFIG_ABX500_CORE is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
@@ -133,7 +209,7 @@ CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_PRINTER=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DATAFAB=y
@@ -141,8 +217,14 @@ CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ATMEL_USBA=m
 CONFIG_MMC=y
 CONFIG_SDIO_UART=y
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -155,15 +237,23 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_RS5C372=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_S35390A=y
+CONFIG_RTC_DRV_RV3029C2=m
+CONFIG_RTC_DRV_AT91RM9200=m
+CONFIG_RTC_DRV_AT91SAM9=m
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
+CONFIG_AT_HDMAC=y
 CONFIG_MV_XOR=y
 CONFIG_STAGING=y
 CONFIG_FB_XGI=y
+CONFIG_IIO=m
+CONFIG_AT91_ADC=m
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=m
+CONFIG_PWM_ATMEL_HLCDC_PWM=m
+CONFIG_PWM_ATMEL_TCB=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -171,6 +261,7 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
@@ -189,7 +280,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 5fd8df6f5..ea3566fb9 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -11,8 +11,13 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_MULTI_V7=y
+# CONFIG_ARCH_MULTI_V5 is not set
+# CONFIG_ARCH_MULTI_V4 is not set
 CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_ARTPEC=y
+CONFIG_MACH_ARTPEC6=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_375=y
@@ -21,13 +26,17 @@ CONFIG_MACH_ARMADA_39X=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_MACH_DOVE=y
 CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM_CYGNUS=y
+CONFIG_ARCH_BCM_NSP=y
 CONFIG_ARCH_BCM_21664=y
 CONFIG_ARCH_BCM_281XX=y
 CONFIG_ARCH_BCM_5301X=y
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_BCM_63XX=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
@@ -49,6 +58,8 @@ CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
 CONFIG_SOC_IMX6SX=y
+CONFIG_SOC_IMX6UL=y
+CONFIG_SOC_IMX7D=y
 CONFIG_SOC_VF610=y
 CONFIG_SOC_LS1021A=y
 CONFIG_ARCH_OMAP3=y
@@ -71,7 +82,7 @@ CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_EXYNOS5420_MCPM=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
@@ -80,9 +91,10 @@ CONFIG_ARCH_R8A7778=y
 CONFIG_ARCH_R8A7779=y
 CONFIG_ARCH_R8A7790=y
 CONFIG_ARCH_R8A7791=y
+CONFIG_ARCH_R8A7792=y
+CONFIG_ARCH_R8A7793=y
 CONFIG_ARCH_R8A7794=y
 CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_MARZEN=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_SIRF=y
 CONFIG_ARCH_TEGRA=y
@@ -95,9 +107,9 @@ CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_U8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
-CONFIG_MACH_UX500_DT=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_ARCH_VEXPRESS_TC2_PM=y
 CONFIG_ARCH_WM8850=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_TRUSTED_FOUNDATIONS=y
@@ -108,7 +120,7 @@ CONFIG_PCI_MSI=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PCI_TEGRA=y
 CONFIG_PCI_RCAR_GEN2=y
-CONFIG_PCI_RCAR_GEN2_PCIE=y
+CONFIG_PCIE_RCAR=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
@@ -120,6 +132,11 @@ CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=m
+CONFIG_QORIQ_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_NEON=y
@@ -142,13 +159,18 @@ CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NET_DSA=m
+CONFIG_NET_SWITCHDEV=y
 CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
 CONFIG_CAN_DEV=y
 CONFIG_CAN_AT91=m
+CONFIG_CAN_RCAR=m
 CONFIG_CAN_XILINXCAN=y
 CONFIG_CAN_MCP251X=y
+CONFIG_NET_DSA_BCM_SF2=m
+CONFIG_CAN_SUN4I=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
@@ -163,32 +185,40 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_OMAP_OCP2SCP=y
 CONFIG_SIMPLE_PM_BUS=y
+CONFIG_SUNXI_RSB=m
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_BRCMNAND=y
+CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_SPI_NOR=y
+CONFIG_SPI_FSL_QUADSPI=m
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_VIRTIO_BLK=y
 CONFIG_AD525X_DPOT=y
 CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ATMEL_TCLIB=y
 CONFIG_ICS932S401=y
 CONFIG_ATMEL_SSC=m
+CONFIG_QCOM_COINCELL=m
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
 CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_SUNXI_SID=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_BRCM=y
 CONFIG_AHCI_ST=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
@@ -196,18 +226,24 @@ CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_MACB=y
+CONFIG_BCMGENET=m
+CONFIG_SYSTEMPORT=m
 CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_GIANFAR=y
 CONFIG_IGB=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
+CONFIG_PXA168_ETH=m
 CONFIG_KS8851=y
 CONFIG_R8169=y
 CONFIG_SH_ETH=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
+CONFIG_SYNOPSYS_DWC_ETH_QOS=y
 CONFIG_TI_CPSW=y
 CONFIG_XILINX_EMACLITE=y
 CONFIG_AT803X_PHY=y
@@ -215,8 +251,11 @@ CONFIG_MARVELL_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_FIXED_PHY=y
 CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8152=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
@@ -232,18 +271,23 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_SPEAR=y
 CONFIG_KEYBOARD_ST_KEYSCAN=y
-CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_KEYBOARD_CROS_EC=m
+CONFIG_KEYBOARD_SAMSUNG=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_CYAPA=m
 CONFIG_MOUSE_ELAN_I2C=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_MMS114=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_TOUCHSCREEN_SUN4I=y
+CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MAX77693_HAPTIC=m
+CONFIG_INPUT_MAX8997_HAPTIC=m
 CONFIG_INPUT_MPU3050=y
-CONFIG_INPUT_AXP20X_PEK=y
+CONFIG_INPUT_AXP20X_PEK=m
 CONFIG_INPUT_ADXL34X=m
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
@@ -251,11 +295,14 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
 CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_ATMEL_TTYAT=y
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
 CONFIG_SERIAL_MESON=y
 CONFIG_SERIAL_MESON_CONSOLE=y
 CONFIG_SERIAL_SAMSUNG=y
@@ -283,35 +330,51 @@ CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
 CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
 CONFIG_SERIAL_ST_ASC=y
 CONFIG_SERIAL_ST_ASC_CONSOLE=y
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_ARB_GPIO_CHALLENGE=m
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
+CONFIG_I2C_DEMUX_PINCTRL=y
 CONFIG_I2C_AT91=m
+CONFIG_I2C_BCM2835=y
 CONFIG_I2C_CADENCE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_DIGICOLOR=m
+CONFIG_I2C_EMEV2=m
 CONFIG_I2C_GPIO=m
 CONFIG_I2C_EXYNOS5=y
+CONFIG_I2C_IMX=m
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_RIIC=y
+CONFIG_I2C_RK3X=y
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SH_MOBILE=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_ST=y
+CONFIG_I2C_SUN6I_P2WI=y
 CONFIG_I2C_TEGRA=y
+CONFIG_I2C_UNIPHIER=y
+CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_XILINX=y
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=m
+CONFIG_I2C_SLAVE_EEPROM=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=m
+CONFIG_SPI_BCM2835=y
+CONFIG_SPI_BCM2835AUX=y
 CONFIG_SPI_CADENCE=y
 CONFIG_SPI_DAVINCI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_FSL_DSPI=m
 CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
+CONFIG_SPI_ROCKCHIP=m
 CONFIG_SPI_RSPI=y
 CONFIG_SPI_S3C64XX=m
 CONFIG_SPI_SH_MSIOF=m
@@ -324,9 +387,19 @@ CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_SPI_XILINX=y
 CONFIG_SPI_SPIDEV=y
+CONFIG_SPMI=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_BCM2835=y
+CONFIG_PINCTRL_APQ8064=y
 CONFIG_PINCTRL_APQ8084=y
+CONFIG_PINCTRL_IPQ8064=y
+CONFIG_PINCTRL_MSM8660=y
+CONFIG_PINCTRL_MSM8960=y
+CONFIG_PINCTRL_MSM8X74=y
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_GPIO_DAVINCI=y
@@ -343,21 +416,32 @@ CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_SYSCON=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
+CONFIG_BATTERY_ACT8945A=y
 CONFIG_BATTERY_SBS=y
 CONFIG_BATTERY_MAX17040=m
 CONFIG_BATTERY_MAX17042=m
 CONFIG_CHARGER_MAX14577=m
 CONFIG_CHARGER_MAX77693=m
+CONFIG_CHARGER_MAX8997=m
+CONFIG_CHARGER_MAX8998=m
 CONFIG_CHARGER_TPS65090=y
+CONFIG_AXP20X_POWER=m
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_KEYSTONE=y
 CONFIG_POWER_RESET_RMOBILE=y
+CONFIG_POWER_RESET_ST=y
+CONFIG_POWER_AVS=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
-CONFIG_THERMAL=y
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_SENSORS_PWM_FAN=m
+CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
+CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_DAVINCI_WATCHDOG=m
@@ -365,53 +449,93 @@ CONFIG_EXYNOS_THERMAL=m
 CONFIG_ST_THERMAL_SYSCFG=y
 CONFIG_ST_THERMAL_MEMMAP=y
 CONFIG_WATCHDOG=y
+CONFIG_DA9063_WATCHDOG=m
 CONFIG_XILINX_WATCHDOG=y
 CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SAMA5D4_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
 CONFIG_ST_LPC_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_TEGRA_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=y
+CONFIG_DW_WATCHDOG=y
+CONFIG_DIGICOLOR_WATCHDOG=y
+CONFIG_BCM2835_WDT=y
+CONFIG_BCM7038_WDT=m
+CONFIG_BCM_KONA_WDT=y
+CONFIG_MFD_ACT8945A=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
+CONFIG_MFD_ATMEL_HLCDC=m
 CONFIG_MFD_BCM590XX=y
 CONFIG_MFD_AXP20X=y
-CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_AXP20X_I2C=m
+CONFIG_MFD_AXP20X_RSB=m
+CONFIG_MFD_CROS_EC=m
 CONFIG_MFD_CROS_EC_I2C=m
-CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_MFD_CROS_EC_SPI=m
+CONFIG_MFD_DA9063=m
 CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77686=y
-CONFIG_MFD_MAX77693=y
+CONFIG_MFD_MAX77693=m
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_MAX8997=y
+CONFIG_MFD_MAX8998=y
+CONFIG_MFD_RK808=y
+CONFIG_MFD_PM8921_CORE=y
+CONFIG_MFD_QCOM_RPM=y
+CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
+CONFIG_MFD_TPS65217=y
+CONFIG_MFD_TPS65218=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
+CONFIG_REGULATOR_ACT8945A=y
 CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_ACT8865=y
 CONFIG_REGULATOR_AS3711=y
 CONFIG_REGULATOR_AS3722=y
-CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_AXP20X=m
 CONFIG_REGULATOR_BCM590XX=y
 CONFIG_REGULATOR_DA9210=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_RK808=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MFD_SYSCON=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_REGULATOR_LP872X=y
 CONFIG_REGULATOR_MAX14577=m
 CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_MAX8973=y
+CONFIG_REGULATOR_MAX8997=m
+CONFIG_REGULATOR_MAX8998=m
 CONFIG_REGULATOR_MAX77686=y
 CONFIG_REGULATOR_MAX77693=m
+CONFIG_REGULATOR_MAX77802=m
 CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_PBIAS=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_S2MPS11=y
 CONFIG_REGULATOR_S5M8767=y
+CONFIG_REGULATOR_TI_ABB=y
 CONFIG_REGULATOR_TPS51632=y
 CONFIG_REGULATOR_TPS62360=y
 CONFIG_REGULATOR_TPS65090=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_REGULATOR_VEXPRESS=y
+CONFIG_REGULATOR_WM8994=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
@@ -423,22 +547,51 @@ CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=m
 CONFIG_SOC_CAMERA_PLATFORM=m
 CONFIG_VIDEO_RCAR_VIN=m
+CONFIG_VIDEO_ATMEL_ISI=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
+CONFIG_VIDEO_S5P_FIMC=m
+CONFIG_VIDEO_S5P_MIPI_CSIS=m
+CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
+CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+CONFIG_VIDEO_STI_BDISP=m
+CONFIG_VIDEO_RENESAS_JPU=m
 CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_V4L_TEST_DRIVERS=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_ML86V7667=m
 CONFIG_DRM=y
-CONFIG_DRM_PTN3460=m
-CONFIG_DRM_PS8622=m
+CONFIG_DRM_I2C_ADV7511=m
+# CONFIG_DRM_I2C_CH7006 is not set
+# CONFIG_DRM_I2C_SIL164 is not set
+CONFIG_DRM_NXP_PTN3460=m
+CONFIG_DRM_PARADE_PS8622=m
+CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_EXYNOS=m
-CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_FIMD=y
+CONFIG_DRM_EXYNOS_MIXER=y
+CONFIG_DRM_EXYNOS_DPI=y
+CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_ANALOGIX_DP=m
+CONFIG_ROCKCHIP_DW_HDMI=m
+CONFIG_ROCKCHIP_DW_MIPI_DSI=m
+CONFIG_ROCKCHIP_INNO_HDMI=m
+CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_RCAR_DU=m
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
+CONFIG_DRM_SUN4I=m
 CONFIG_DRM_TEGRA=y
-CONFIG_DRM_PANEL_S6E8AA0=m
+CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
+CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_STI=m
+CONFIG_DRM_VC4=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
@@ -454,25 +607,49 @@ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_SOUND=m
 CONFIG_SND=m
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_HDA_TEGRA=m
+CONFIG_SND_HDA_INPUT_BEEP=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_ATMEL_SOC=m
 CONFIG_SND_ATMEL_SOC_WM8904=m
+CONFIG_SND_ATMEL_SOC_PDMIC=m
+CONFIG_SND_BCM2835_SOC_I2S=m
+CONFIG_SND_SOC_FSL_SAI=m
+CONFIG_SND_SOC_ROCKCHIP=m
+CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
+CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
+CONFIG_SND_SOC_ROCKCHIP_RT5645=m
+CONFIG_SND_SOC_SAMSUNG=m
+CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
+CONFIG_SND_SOC_SMDK_WM8994_PCM=m
+CONFIG_SND_SOC_SNOW=m
 CONFIG_SND_SOC_SH4_FSI=m
 CONFIG_SND_SOC_RCAR=m
+CONFIG_SND_SOC_RSRC_CARD=m
+CONFIG_SND_SUN4I_CODEC=m
 CONFIG_SND_SOC_TEGRA=m
 CONFIG_SND_SOC_TEGRA_RT5640=m
 CONFIG_SND_SOC_TEGRA_WM8753=m
 CONFIG_SND_SOC_TEGRA_WM8903=m
+CONFIG_SND_SOC_TEGRA_WM9712=m
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
 CONFIG_SND_SOC_TEGRA_ALC5632=m
 CONFIG_SND_SOC_TEGRA_MAX98090=m
 CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_SGTL5000=m
+CONFIG_SND_SOC_SPDIF=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
+CONFIG_USB_XHCI_RCAR=m
+CONFIG_USB_XHCI_TEGRA=m
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MSM=m
 CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_STI=y
@@ -485,26 +662,32 @@ CONFIG_USB_OHCI_EXYNOS=m
 CONFIG_USB_R8A66597_HCD=m
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SUNXI=m
 CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
 CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_OMAP_USB3=y
-CONFIG_SAMSUNG_USB2PHY=y
-CONFIG_SAMSUNG_USB3PHY=y
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
+CONFIG_USB_MSM_OTG=m
 CONFIG_USB_MXS_PHY=y
-CONFIG_USB_RCAR_PHY=m
 CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_MMC_SDHCI_OF_AT91=y
+CONFIG_MMC_SDHCI_OF_ESDHC=m
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_DOVE=y
 CONFIG_MMC_SDHCI_TEGRA=y
@@ -517,6 +700,7 @@ CONFIG_MMC_SDHCI_ST=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SDHCI_MSM=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_DW=y
@@ -528,8 +712,11 @@ CONFIG_MMC_SH_MMCIF=y
 CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
+CONFIG_LEDS_MAX77693=m
+CONFIG_LEDS_MAX8997=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
@@ -547,9 +734,12 @@ CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AS3722=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_HYM8563=m
 CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_MAX8998=m
+CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
-CONFIG_RTC_DRV_MAX77802=m
+CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_ST_LPC=y
@@ -559,6 +749,7 @@ CONFIG_RTC_DRV_TPS65910=y
 CONFIG_RTC_DRV_S35390A=m
 CONFIG_RTC_DRV_RX8581=m
 CONFIG_RTC_DRV_EM3027=y
+CONFIG_RTC_DRV_DA9063=m
 CONFIG_RTC_DRV_DIGICOLOR=m
 CONFIG_RTC_DRV_S5M=m
 CONFIG_RTC_DRV_S3C=m
@@ -574,10 +765,12 @@ CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
 CONFIG_AT_HDMAC=y
 CONFIG_AT_XDMAC=y
+CONFIG_FSL_EDMA=y
 CONFIG_MV_XOR=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_SH_DMAE=y
 CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=m
 CONFIG_STE_DMA40=y
 CONFIG_SIRF_DMA=y
 CONFIG_TI_EDMA=y
@@ -585,8 +778,11 @@ CONFIG_PL330_DMA=y
 CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
 CONFIG_MXS_DMA=y
+CONFIG_DMA_BCM2835=y
 CONFIG_DMA_OMAP=y
-CONFIG_XILINX_VDMA=y
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_XILINX_DMA=y
+CONFIG_DMA_SUN6I=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_ISL29028=y
@@ -597,36 +793,66 @@ CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_WCNSS_CTRL=m
+CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_CHROME_PLATFORMS=y
+CONFIG_STAGING_BOARD=y
 CONFIG_CROS_EC_CHARDEV=m
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_MAX77802=m
+CONFIG_COMMON_CLK_RK808=m
 CONFIG_COMMON_CLK_S2MPS11=m
 CONFIG_APQ_MMCC_8084=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_PM_DEVFREQ=y
 CONFIG_ARM_TEGRA_DEVFREQ=m
 CONFIG_MEMORY=y
+CONFIG_EXTCON=y
 CONFIG_TI_AEMIF=y
 CONFIG_IIO=y
 CONFIG_AT91_ADC=m
+CONFIG_AT91_SAMA5D2_ADC=m
+CONFIG_BERLIN2_ADC=m
+CONFIG_EXYNOS_ADC=m
+CONFIG_VF610_ADC=m
 CONFIG_XILINX_XADC=y
+CONFIG_CM36651=m
 CONFIG_AK8975=y
+CONFIG_RASPBERRYPI_POWER=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=m
+CONFIG_PWM_ATMEL_HLCDC_PWM=m
 CONFIG_PWM_ATMEL_TCB=m
+CONFIG_PWM_FSL_FTM=m
 CONFIG_PWM_RENESAS_TPU=y
+CONFIG_PWM_ROCKCHIP=m
 CONFIG_PWM_SAMSUNG=m
+CONFIG_PWM_SUN4I=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_PHY_HIX5HD2_SATA=y
+CONFIG_PWM_STI=y
+CONFIG_PWM_BCM2835=y
+CONFIG_PWM_BRCMSTB=m
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
+CONFIG_PHY_BERLIN_USB=y
+CONFIG_PHY_BERLIN_SATA=y
+CONFIG_PHY_ROCKCHIP_DP=m
+CONFIG_PHY_ROCKCHIP_USB=m
+CONFIG_PHY_QCOM_APQ8064_SATA=m
 CONFIG_PHY_MIPHY28LP=y
 CONFIG_PHY_MIPHY365X=y
 CONFIG_PHY_RCAR_GEN2=m
@@ -635,6 +861,12 @@ CONFIG_PHY_STIH407_USB=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_SAMSUNG_USB2=m
+CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_PHY_BRCM_SATA=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_BCM2835_MBOX=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
@@ -660,6 +892,12 @@ CONFIG_LOCKUP_DETECTOR=y
 CONFIG_CRYPTO_DEV_TEGRA_AES=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_KEYSTONE_IRQ=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_ST=y
+CONFIG_CRYPTO_DEV_MARVELL_CESA=m
+CONFIG_CRYPTO_DEV_S5P=m
+CONFIG_CRYPTO_DEV_SUN4I_SS=m
+CONFIG_CRYPTO_DEV_ROCKCHIP=m
 CONFIG_ARM_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
@@ -674,3 +912,8 @@ CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=m
 CONFIG_CRYPTO_DEV_ATMEL_TDES=m
 CONFIG_CRYPTO_DEV_ATMEL_SHA=m
+CONFIG_VIDEO_VIVID=m
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_MMIO=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 85d10d2e3..a0345e1ce 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -11,6 +11,9 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MV78XX0=y
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
@@ -132,7 +135,6 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 824de4992..6051c51ca 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -12,8 +12,29 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_NETXBIG=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_ARCH_ORION5X=y
+CONFIG_MACH_DB88F5281=y
+CONFIG_MACH_RD88F5182=y
+CONFIG_MACH_RD88F5182_DT=y
+CONFIG_MACH_KUROBOX_PRO=y
+CONFIG_MACH_DNS323=y
+CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
+CONFIG_MACH_LINKSTATION_PRO=y
+CONFIG_MACH_LINKSTATION_LSCHL=y
+CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
+CONFIG_MACH_TS409=y
+CONFIG_MACH_WRT350N_V2=y
+CONFIG_MACH_TS78XX=y
+CONFIG_MACH_MV2120=y
+CONFIG_MACH_D2NET_DT=y
+CONFIG_MACH_NET2BIG=y
+CONFIG_MACH_MSS2_DT=y
+CONFIG_MACH_WNR854T=y
+CONFIG_MACH_RD88F5181L_GE=y
+CONFIG_MACH_RD88F5181L_FXO=y
+CONFIG_MACH_RD88F6183AP_GE=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -26,6 +47,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_KIRKWOOD_CPUIDLE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -35,6 +57,8 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
@@ -66,8 +90,11 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123=y
 CONFIG_NET_DSA_MV88E6171=y
+CONFIG_NET_DSA_MV88E6352=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
@@ -91,7 +118,6 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
@@ -103,16 +129,16 @@ CONFIG_SENSORS_LM85=y
 CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_T5325=y
 CONFIG_SND_SOC_ALC5623=y
+CONFIG_SND_SOC_CS42L51_I2C=y
 CONFIG_SND_SIMPLE_CARD=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
@@ -159,8 +185,6 @@ CONFIG_STAGING=y
 CONFIG_FB_XGI=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -184,9 +208,8 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index cacc9f405..486a4cabb 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -58,12 +58,15 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_SPI_NOR=y
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
 CONFIG_AHCI_MVEBU=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MV88E6171=y
+CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_MVPP2=y
@@ -83,11 +86,17 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -101,18 +110,22 @@ CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_STORAGE=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_DOVE=y
 CONFIG_MMC_SDHCI_PXAV3=y
 CONFIG_MMC_MVSDIO=y
-CONFIG_LEDS_GPIO=y
+CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_RTC_DRV_ARMADA38X=y
@@ -142,3 +155,4 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index b47e7c662..6e0f751be 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -12,6 +12,7 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_IPC_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
@@ -141,9 +142,8 @@ CONFIG_IIO=y
 CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_PWM=y
 CONFIG_PWM_MXS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_MXS_OCOTP=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_FSCACHE=m
@@ -178,7 +178,6 @@ CONFIG_PROVE_LOCKING=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_STRICT_DEVMEM=y
 CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MXS_DCP=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC7=m
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 25ed772df..4f3dfb217 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -5,6 +5,7 @@ CONFIG_ARCH_FOOTBRIDGE=y
 CONFIG_ARCH_NETWINDER=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
+CONFIG_DEPRECATED_PARAM_STRUCT=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=0x301"
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index ac521e764..487c6c3b1 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -10,18 +10,17 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_PERF=y
+CONFIG_BLK_CGROUP=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
@@ -68,7 +67,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT=m
 # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
 CONFIG_CPU_IDLE=y
 CONFIG_BINFMT_MISC=y
@@ -85,7 +84,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
 CONFIG_PHONET=m
 CONFIG_CAN=m
@@ -101,19 +99,18 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIUART_3WIRE=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
-CONFIG_CFG80211=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 CONFIG_AF_RXRPC=m
-CONFIG_RXKAD=m
+CONFIG_RXKAD=y
+CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -128,6 +125,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=m
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC_BCH=y
 CONFIG_MTD_NAND_OMAP2=y
@@ -135,6 +133,7 @@ CONFIG_MTD_NAND_OMAP_BCH=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_MTD_SPI_NOR=m
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -142,6 +141,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_SENSORS_TSL2550=m
 CONFIG_BMP085_I2C=m
 CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=m
 CONFIG_SENSORS_LIS3_I2C=m
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SCAN_ASYNC=y
@@ -169,31 +169,30 @@ CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_TI_CPSW=y
+CONFIG_TI_CPTS=y
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_AT803X_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_USB_USBNET=m
+CONFIG_USB_NET_SMSC75XX=m
 CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_KC2190=y
 CONFIG_USB_CDC_PHONET=m
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_USB=m
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_DEBUG=y
-CONFIG_WL_TI=y
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_USB=m
 CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SPI=m
 CONFIG_WLCORE_SDIO=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_MWIFIEX_USB=m
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_ATKBD=m
@@ -205,6 +204,7 @@ CONFIG_KEYBOARD_TWL4030=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
 CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
 CONFIG_TOUCHSCREEN_PIXCIR=m
 CONFIG_TOUCHSCREEN_TSC2005=m
 CONFIG_TOUCHSCREEN_TSC2007=m
@@ -231,17 +231,17 @@ CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_TI_QSPI=m
 CONFIG_HSI=m
 CONFIG_OMAP_SSI=m
-CONFIG_NOKIA_MODEM=m
 CONFIG_SSI_PROTOCOL=m
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_TWL4030=y
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_TWL4030=y
 CONFIG_W1=m
 CONFIG_HDQ_MASTER_OMAP=m
-CONFIG_BATTERY_BQ27x00=m
+CONFIG_BATTERY_BQ27XXX=m
 CONFIG_CHARGER_ISP1704=m
 CONFIG_CHARGER_TWL4030=m
 CONFIG_CHARGER_BQ2415X=m
@@ -265,11 +265,13 @@ CONFIG_DRA752_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=m
 CONFIG_TWL4030_WATCHDOG=m
+CONFIG_MFD_TI_AM335X_TSCADC=m
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65218=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_LP872X=y
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_TI_ABB=y
@@ -280,28 +282,39 @@ CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_LIRC=m
+CONFIG_RC_DEVICES=y
+CONFIG_IR_RX51=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_OMAP3=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_TVP5150=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_OMAP2_DSS=m
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
-CONFIG_DISPLAY_ENCODER_TFP410=m
-CONFIG_DISPLAY_ENCODER_TPD12S015=m
-CONFIG_DISPLAY_CONNECTOR_DVI=m
-CONFIG_DISPLAY_CONNECTOR_HDMI=m
-CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
-CONFIG_DISPLAY_PANEL_DPI=m
-CONFIG_DISPLAY_PANEL_DSI_CM=m
-CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
-CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
-CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
-CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
+CONFIG_FB_OMAP5_DSS_HDMI=y
+CONFIG_FB_OMAP2_DSS_SDI=y
+CONFIG_FB_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP2_ENCODER_TFP410=m
+CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
+CONFIG_FB_OMAP2_CONNECTOR_DVI=m
+CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
+CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
+CONFIG_FB_OMAP2_PANEL_DPI=m
+CONFIG_FB_OMAP2_PANEL_DSI_CM=m
+CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
+CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
+CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
@@ -328,6 +341,7 @@ CONFIG_SND_OMAP_SOC=m
 CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
+CONFIG_SND_SIMPLE_CARD=m
 CONFIG_HID_GENERIC=m
 CONFIG_USB_HIDDEV=y
 CONFIG_USB_KBD=m
@@ -336,15 +350,28 @@ CONFIG_USB=m
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=m
 CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_WDM=m
 CONFIG_USB_STORAGE=m
 CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_TUSB6010=m
 CONFIG_USB_MUSB_OMAP2PLUS=m
 CONFIG_USB_MUSB_AM35X=m
 CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_USB_TI_CPPI41_DMA=y
+CONFIG_USB_TUSB_OMAP_DMA=y
 CONFIG_USB_DWC3=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_TEST=m
-CONFIG_AM335X_PHY_USB=y
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_AM335X_PHY_USB=m
+CONFIG_TWL6030_USB=m
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
@@ -375,6 +402,7 @@ CONFIG_MMC_OMAP_HS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_PWM=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
@@ -386,19 +414,22 @@ CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_TWL92330=y
 CONFIG_RTC_DRV_TWL4030=m
+CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_OMAP=m
 CONFIG_DMADEVICES=y
-CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
-# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_TI_EDMA=y
+CONFIG_OMAP_IOMMU=y
 CONFIG_EXTCON=m
-CONFIG_EXTCON_USB_GPIO=m
 CONFIG_EXTCON_PALMAS=m
+CONFIG_EXTCON_USB_GPIO=m
 CONFIG_TI_EMIF=m
+CONFIG_IIO=m
+CONFIG_TI_AM335X_ADC=m
 CONFIG_PWM=y
+CONFIG_PWM_OMAP_DMTIMER=m
 CONFIG_PWM_TIECAP=m
 CONFIG_PWM_TIEHRPWM=m
 CONFIG_PWM_TWL=m
@@ -409,8 +440,6 @@ CONFIG_TI_PIPE3=y
 CONFIG_TWL4030_USB=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=y
@@ -436,6 +465,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_SPLIT=y
+CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -443,7 +474,6 @@ CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 855143fac..27a70a7a5 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -13,9 +13,14 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ORION5X=y
+CONFIG_ARCH_ORION5X_DT=y
 CONFIG_MACH_DB88F5281=y
 CONFIG_MACH_RD88F5182=y
+CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
 CONFIG_MACH_TS209=y
@@ -41,6 +46,7 @@ CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_FPE_NWFPE=y
 CONFIG_VFP=y
 CONFIG_NET=y
@@ -79,8 +85,7 @@ CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_MII=y
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MARVELL_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -156,7 +161,6 @@ CONFIG_LATENCYTOP=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index 4baa83c1c..83c135e19 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -67,7 +67,7 @@ CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_PXA=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=y
+CONFIG_RTC_DRV_PXA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_DNOTIFY is not set
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index 0a847d04d..b5624e325 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -82,7 +82,7 @@ CONFIG_MMC=y
 CONFIG_MMC_PXA=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_SA1100=m
+CONFIG_RTC_DRV_PXA=m
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 # CONFIG_DNOTIFY is not set
diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig
index f610230b9..7cc8e8e4d 100644
--- a/arch/arm/configs/prima2_defconfig
+++ b/arch/arm/configs/prima2_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_RELAY=y
@@ -11,14 +10,12 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_ARCH_SIRF=y
-# CONFIG_SWP_EMULATE is not set
 CONFIG_SMP=y
 CONFIG_SCHED_MC=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_KEXEC=y
 CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -29,6 +26,7 @@ CONFIG_CHR_DEV_SG=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
 CONFIG_SERIAL_SIRFSOC=y
 CONFIG_SERIAL_SIRFSOC_CONSOLE=y
 CONFIG_HW_RANDOM=y
@@ -45,10 +43,14 @@ CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_SIRF=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SIRFSOC=y
 CONFIG_DMADEVICES=y
 CONFIG_DMADEVICES_DEBUG=y
 CONFIG_DMADEVICES_VDEBUG=y
 CONFIG_SIRF_DMA=y
+CONFIG_HWSPINLOCK_SIRF=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
@@ -60,12 +62,12 @@ CONFIG_ROMFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_INFO=y
 CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
new file mode 100644
index 000000000..dc5517eaf
--- /dev/null
+++ b/arch/arm/configs/pxa_defconfig
@@ -0,0 +1,784 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=13
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_LDM_PARTITION=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_PXA=y
+CONFIG_MACH_PXA27X_DT=y
+CONFIG_MACH_PXA3XX_DT=y
+CONFIG_ARCH_LUBBOCK=y
+CONFIG_MACH_MAINSTONE=y
+CONFIG_MACH_ZYLONITE300=y
+CONFIG_MACH_ZYLONITE320=y
+CONFIG_MACH_LITTLETON=y
+CONFIG_MACH_TAVOREVB=y
+CONFIG_MACH_SAAR=y
+CONFIG_ARCH_PXA_IDP=y
+CONFIG_ARCH_VIPER=y
+CONFIG_MACH_ARCOM_ZEUS=y
+CONFIG_MACH_BALLOON3=y
+CONFIG_MACH_CSB726=y
+CONFIG_CSB726_CSB701=y
+CONFIG_MACH_ARMCORE=y
+CONFIG_MACH_EM_X270=y
+CONFIG_MACH_EXEDA=y
+CONFIG_MACH_CM_X300=y
+CONFIG_MACH_CAPC7117=y
+CONFIG_ARCH_GUMSTIX=y
+CONFIG_MACH_INTELMOTE2=y
+CONFIG_MACH_STARGATE2=y
+CONFIG_MACH_XCEP=y
+CONFIG_TRIZEPS_PXA=y
+CONFIG_MACH_TRIZEPS4WL=y
+CONFIG_MACH_LOGICPD_PXA270=y
+CONFIG_MACH_PCM027=y
+CONFIG_MACH_PCM990_BASEBOARD=y
+CONFIG_MACH_COLIBRI=y
+CONFIG_MACH_COLIBRI_PXA270_INCOME=y
+CONFIG_MACH_COLIBRI300=y
+CONFIG_MACH_COLIBRI320=y
+CONFIG_MACH_COLIBRI_EVALBOARD=y
+CONFIG_MACH_VPAC270=y
+CONFIG_MACH_H4700=y
+CONFIG_MACH_H5000=y
+CONFIG_MACH_HIMALAYA=y
+CONFIG_MACH_MAGICIAN=y
+CONFIG_MACH_MIOA701=y
+CONFIG_PXA_EZX=y
+CONFIG_MACH_MP900C=y
+CONFIG_ARCH_PXA_PALM=y
+CONFIG_MACH_RAUMFELD_RC=y
+CONFIG_MACH_RAUMFELD_CONNECTOR=y
+CONFIG_MACH_RAUMFELD_SPEAKER=y
+CONFIG_PXA_SHARPSL=y
+CONFIG_MACH_POODLE=y
+CONFIG_MACH_CORGI=y
+CONFIG_MACH_SHEPHERD=y
+CONFIG_MACH_HUSKY=y
+CONFIG_MACH_AKITA=y
+CONFIG_MACH_BORZOI=y
+CONFIG_MACH_TOSA=y
+CONFIG_TOSA_BT=m
+CONFIG_TOSA_USE_EXT_KEYCODES=y
+CONFIG_MACH_ICONTROL=y
+CONFIG_ARCH_PXA_ESERIES=y
+CONFIG_MACH_ZIPIT2=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCCARD=m
+CONFIG_YENTA=m
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_COMPACTION is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 ro"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPUFREQ_DT=m
+CONFIG_ARM_PXA2xx_CPUFREQ=m
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_IEEE802154=y
+CONFIG_DNS_RESOLVER=y
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+CONFIG_IRTTY_SIR=m
+CONFIG_PXA_FICP=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_CFG80211=m
+CONFIG_CFG80211_REG_DEBUG=y
+CONFIG_MAC80211=m
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_GPIO=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+CONFIG_MTD_CMDLINE_PARTS=m
+CONFIG_MTD_AFS_PARTS=m
+CONFIG_MTD_OF_PARTS=m
+CONFIG_MTD_AR7_PARTS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PXA2XX=m
+CONFIG_MTD_M25P80=m
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_DOCG3=m
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_SHARPSL=m
+CONFIG_MTD_NAND_PXA3xx=m
+CONFIG_MTD_NAND_CM_X270=m
+CONFIG_MTD_NAND_TMIO=m
+CONFIG_MTD_NAND_BRCMNAND=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_SPI_NOR=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=8
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_ICS932S401=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_TI_DAC7512=m
+CONFIG_EEPROM_AT24=m
+CONFIG_SENSORS_LIS3_SPI=m
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECS=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=m
+CONFIG_SATA_AHCI=m
+CONFIG_SATA_AHCI_PLATFORM=m
+CONFIG_SATA_MV=m
+CONFIG_PATA_PXA=m
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_PLATFORM=m
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_MACB=m
+CONFIG_DM9000=m
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+CONFIG_IGB=m
+CONFIG_KS8851=y
+CONFIG_AX88796=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_8139TOO=m
+CONFIG_R8169=m
+CONFIG_SMC91X=m
+CONFIG_SMSC911X=m
+CONFIG_STMMAC_ETH=m
+CONFIG_PHYLIB=y
+CONFIG_AT803X_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_FIXED_PHY=m
+CONFIG_MDIO_BITBANG=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_BRCMFMAC=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_CS=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_POLLDEV=y
+CONFIG_INPUT_MATRIXKMAP=y
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_APMPOWER=m
+CONFIG_KEYBOARD_ATKBD=m
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_PXA27x=m
+CONFIG_KEYBOARD_PXA930_ROTARY=m
+CONFIG_KEYBOARD_CROS_EC=m
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_CYAPA=m
+CONFIG_MOUSE_ELAN_I2C=m
+CONFIG_MOUSE_PXA930_TRKBALL=m
+CONFIG_MOUSE_NAVPOINT_PXA27x=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_DA9034=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_PCAP=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_AXP20X_PEK=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_PCAP=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_SERIO=m
+CONFIG_SERIO_SA1111=m
+CONFIG_LEGACY_PTY_COUNT=8
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=7
+CONFIG_SERIAL_8250_RUNTIME_UARTS=7
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_MUX_PINCTRL=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
+CONFIG_I2C_PXA_SLAVE=y
+CONFIG_I2C_XILINX=m
+CONFIG_I2C_CROS_EC_TUNNEL=m
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_CADENCE=m
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_PXA2XX=m
+CONFIG_SPI_ROCKCHIP=m
+CONFIG_SPI_XILINX=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_PPS=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_DWAPB=m
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_TPS6586X=y
+CONFIG_GPIO_TPS65910=y
+CONFIG_GPIO_MAX7301=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_DA9030=m
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_MAX14577=m
+CONFIG_CHARGER_MAX77693=m
+CONFIG_CHARGER_TPS65090=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_THERMAL=m
+CONFIG_WATCHDOG=y
+CONFIG_XILINX_WATCHDOG=m
+CONFIG_SA1100_WATCHDOG=m
+CONFIG_MFD_AS3711=y
+CONFIG_MFD_BCM590XX=m
+CONFIG_MFD_AXP20X=y
+CONFIG_MFD_CROS_EC=m
+CONFIG_MFD_CROS_EC_I2C=m
+CONFIG_MFD_CROS_EC_SPI=m
+CONFIG_MFD_ASIC3=y
+CONFIG_PMIC_DA903X=y
+CONFIG_HTC_EGPIO=y
+CONFIG_HTC_PASIC3=m
+CONFIG_MFD_MAX14577=y
+CONFIG_MFD_MAX77693=y
+CONFIG_MFD_MAX8907=m
+CONFIG_EZX_PCAP=y
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_PM8921_CORE=m
+CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_PALMAS=y
+CONFIG_MFD_TPS65090=y
+CONFIG_MFD_TPS6586X=y
+CONFIG_MFD_TPS65910=y
+CONFIG_MFD_T7L66XB=y
+CONFIG_MFD_TC6387XB=y
+CONFIG_MFD_TC6393XB=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_ACT8865=m
+CONFIG_REGULATOR_AS3711=m
+CONFIG_REGULATOR_AXP20X=m
+CONFIG_REGULATOR_BCM590XX=m
+CONFIG_REGULATOR_DA903X=m
+CONFIG_REGULATOR_DA9210=m
+CONFIG_REGULATOR_FAN53555=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_MAX14577=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8907=m
+CONFIG_REGULATOR_MAX8973=m
+CONFIG_REGULATOR_MAX77693=m
+CONFIG_REGULATOR_PALMAS=m
+CONFIG_REGULATOR_PCAP=m
+CONFIG_REGULATOR_PWM=m
+CONFIG_REGULATOR_S2MPS11=m
+CONFIG_REGULATOR_S5M8767=m
+CONFIG_REGULATOR_TPS51632=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65090=m
+CONFIG_REGULATOR_TPS6586X=m
+CONFIG_REGULATOR_TPS65910=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_PXA27x=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_DRM=m
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_PXA3XX_GCU=m
+CONFIG_FB_MBX=m
+CONFIG_FB_VIRTUAL=m
+CONFIG_FB_SIMPLE=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CORGI=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_LCD_TOSA=m
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_TOSA=m
+CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_LOGO=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PXA2XX_AC97=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=m
+CONFIG_SND_ATMEL_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_CORGI=m
+CONFIG_SND_PXA2XX_SOC_SPITZ=m
+CONFIG_SND_PXA2XX_SOC_Z2=m
+CONFIG_SND_PXA2XX_SOC_POODLE=m
+CONFIG_SND_PXA2XX_SOC_TOSA=m
+CONFIG_SND_PXA2XX_SOC_E740=m
+CONFIG_SND_PXA2XX_SOC_E750=m
+CONFIG_SND_PXA2XX_SOC_E800=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
+CONFIG_SND_PXA2XX_SOC_PALM27X=y
+CONFIG_SND_SOC_ZYLONITE=m
+CONFIG_SND_SOC_RAUMFELD=m
+CONFIG_SND_PXA2XX_SOC_HX4700=m
+CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
+CONFIG_SND_PXA2XX_SOC_MIOA701=m
+CONFIG_SND_PXA2XX_SOC_IMOTE2=m
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_WM8978=m
+CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID=m
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB=m
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=m
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PLATFORM=m
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_DWC3=m
+CONFIG_USB_DWC2=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ISP1301=m
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_PXA25X=m
+CONFIG_USB_PXA27X=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=m
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_SDIO_UART=m
+CONFIG_MMC_PXA=m
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_TMIO=m
+CONFIG_MMC_DW=m
+CONFIG_MMC_DW_EXYNOS=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_DA903X=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_LEDS_TRIGGER_CAMERA=m
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DEBUG=y
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_MAX8907=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_PALMAS=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_TPS6586X=m
+CONFIG_RTC_DRV_TPS65910=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_S5M=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PXA=m
+CONFIG_RTC_DRV_PCAP=m
+CONFIG_DMADEVICES=y
+CONFIG_PXA_DMA=y
+CONFIG_DW_DMAC=m
+CONFIG_UIO=y
+CONFIG_CROS_EC_CHARDEV=m
+CONFIG_COMMON_CLK_S2MPS11=m
+CONFIG_PM_DEVFREQ=y
+CONFIG_EXTCON=y
+CONFIG_MEMORY=y
+CONFIG_PWM=y
+CONFIG_PWM_PXA=m
+CONFIG_PHY_SAMSUNG_USB2=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_FSCACHE=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_WARN=0
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_TIMER_STATS=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_DEBUG_USER=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_MINI_4x6=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index e6a6f282e..c2dff4fd5 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -1,8 +1,10 @@
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS_ALL=y
@@ -21,11 +23,12 @@ CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
+CONFIG_ARCH_MDM9615=y
 CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
 CONFIG_CLEANCACHE=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
@@ -67,6 +70,7 @@ CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_KS8851=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
 CONFIG_SLIP=y
@@ -77,16 +81,21 @@ CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_ZAURUS is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PMIC8XXX=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PM8XXX_VIBRATOR=y
+CONFIG_INPUT_PMIC8XXX_PWRKEY=y
 CONFIG_INPUT_UINPUT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_MSM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_QUP=y
@@ -96,16 +105,27 @@ CONFIG_SPMI=y
 CONFIG_PINCTRL_APQ8064=y
 CONFIG_PINCTRL_APQ8084=y
 CONFIG_PINCTRL_IPQ8064=y
+CONFIG_PINCTRL_MSM8660=y
 CONFIG_PINCTRL_MSM8960=y
+CONFIG_PINCTRL_MDM9615=y
 CONFIG_PINCTRL_MSM8X74=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
 CONFIG_THERMAL=y
+CONFIG_MFD_PM8XXX=y
+CONFIG_MFD_PM8921_CORE=y
+CONFIG_MFD_QCOM_RPM=y
+CONFIG_MFD_SPMI_PMIC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_FB=y
 CONFIG_SOUND=y
@@ -128,10 +148,12 @@ CONFIG_USB_GADGET_VBUS_DRAW=500
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_QCOM_DML=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_MSM=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PM8XXX=y
 CONFIG_DMADEVICES=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_STAGING=y
@@ -140,18 +162,21 @@ CONFIG_APQ_MMCC_8084=y
 CONFIG_IPQ_LCC_806X=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_LCC_8960=y
+CONFIG_MSM_GCC_9615=y
+CONFIG_MSM_LCC_9615=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
-CONFIG_MSM_IOMMU=y
+CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
 CONFIG_PHY_QCOM_APQ8064_SATA=y
 CONFIG_PHY_QCOM_IPQ806X_SATA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
deleted file mode 100644
index 1da5d9e48..000000000
--- a/arch/arm/configs/realview-smp_defconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_REALVIEW=y
-CONFIG_MACH_REALVIEW_EB=y
-CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_MACH_REALVIEW_PB11MP=y
-CONFIG_SMP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_ARM_CHARLCD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_VERSATILE=y
-CONFIG_SPI=y
-CONFIG_GPIOLIB=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARMAACI=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_VERSATILE=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index d02e9d911..9e77dc7b8 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,18 +1,28 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_FULL=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_REALVIEW=y
+CONFIG_REALVIEW_DT=y
 CONFIG_MACH_REALVIEW_EB=y
+CONFIG_REALVIEW_EB_ARM1136=y
+CONFIG_REALVIEW_EB_ARM1176=y
+CONFIG_REALVIEW_EB_A9MP=y
 CONFIG_REALVIEW_EB_ARM11MP=y
+CONFIG_REALVIEW_EB_ARM11MP_REVB=y
 CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
+CONFIG_MACH_REALVIEW_PBA8=y
+CONFIG_MACH_REALVIEW_PBX=y
+CONFIG_SMP=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
@@ -29,28 +39,26 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
+CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_ARM_CHARLCD=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_VERSATILE=y
@@ -69,8 +77,9 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_ARMAACI=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_ISP1760=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
@@ -86,17 +95,13 @@ CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f3142369f..b3ade552a 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -290,6 +290,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
+CONFIG_EEPROM_AT24=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_S3C24XX=m
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index e2f9fa5bb..e0f66936a 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -5,6 +5,8 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C64XX=y
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_MACH_SMDK6400=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 31eb95188..aca8625b6 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -1,8 +1,10 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
@@ -10,12 +12,11 @@ CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
-CONFIG_SOC_SAM_V7=y
+CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
 CONFIG_AEABI=y
@@ -25,12 +26,10 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_ADVANCED_DEBUG=y
 CONFIG_NET=y
@@ -47,7 +46,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
@@ -123,7 +121,6 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_AT91=y
 CONFIG_I2C_GPIO=y
@@ -132,23 +129,33 @@ CONFIG_SPI_ATMEL=y
 CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
+CONFIG_BATTERY_ACT8945A=y
 CONFIG_POWER_RESET=y
 # CONFIG_HWMON is not set
-CONFIG_SSB=m
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SAMA5D4_WATCHDOG=y
+CONFIG_MFD_ACT8945A=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
+CONFIG_MFD_ATMEL_HLCDC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ACT8865=y
+CONFIG_REGULATOR_ACT8945A=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_VIDEO_ATMEL_ISI=y
-CONFIG_FB=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_DRM=y
+CONFIG_DRM_ATMEL_HLCDC=y
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -156,6 +163,7 @@ CONFIG_SND_SOC=y
 CONFIG_SND_ATMEL_SOC=y
 CONFIG_SND_ATMEL_SOC_WM8904=y
 # CONFIG_HID_GENERIC is not set
+CONFIG_SND_ATMEL_SOC_PDMIC=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
@@ -171,6 +179,9 @@ CONFIG_USB_ATMEL_USBA=y
 CONFIG_USB_G_SERIAL=y
 CONFIG_MMC=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_AT91=y
 CONFIG_MMC_ATMELMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -182,12 +193,15 @@ CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_DMADEVICES=y
+CONFIG_AT_HDMAC=y
 CONFIG_AT_XDMAC=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
+CONFIG_AT91_SAMA5D2_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
+CONFIG_PWM_ATMEL_HLCDC_PWM=y
 CONFIG_PWM_ATMEL_TCB=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
@@ -207,11 +221,8 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=y
 CONFIG_CRYPTO_DEV_ATMEL_TDES=y
 CONFIG_CRYPTO_DEV_ATMEL_SHA=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_ITU_T=m
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 9961fbd63..baa07a46a 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -2,14 +2,13 @@ CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
@@ -18,15 +17,15 @@ CONFIG_ARCH_R8A7778=y
 CONFIG_ARCH_R8A7779=y
 CONFIG_ARCH_R8A7790=y
 CONFIG_ARCH_R8A7791=y
+CONFIG_ARCH_R8A7792=y
+CONFIG_ARCH_R8A7793=y
 CONFIG_ARCH_R8A7794=y
 CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_MARZEN=y
-CONFIG_CPU_BPREDICT_DISABLE=y
 CONFIG_PL310_ERRATA_588369=y
 CONFIG_ARM_ERRATA_754322=y
 CONFIG_PCI=y
 CONFIG_PCI_RCAR_GEN2=y
-CONFIG_PCI_RCAR_GEN2_PCIE=y
+CONFIG_PCIE_RCAR=y
 CONFIG_SMP=y
 CONFIG_SCHED_MC=y
 CONFIG_HAVE_ARM_ARCH_TIMER=y
@@ -53,6 +52,8 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
+CONFIG_CAN=y
+CONFIG_CAN_RCAR=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -99,10 +100,14 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=20
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_DEMUX_PINCTRL=y
+CONFIG_I2C_EMEV2=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_RIIC=y
 CONFIG_I2C_SH_MOBILE=y
 CONFIG_I2C_RCAR=y
+CONFIG_I2C_SLAVE_EEPROM=y
 CONFIG_SPI=y
 CONFIG_SPI_RSPI=y
 CONFIG_SPI_SH_MSIOF=y
@@ -121,6 +126,7 @@ CONFIG_WATCHDOG=y
 CONFIG_DA9063_WATCHDOG=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_DA9063=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AS3711=y
 CONFIG_REGULATOR_DA9210=y
 CONFIG_REGULATOR_GPIO=y
@@ -134,31 +140,38 @@ CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_PLATFORM=y
 CONFIG_VIDEO_RCAR_VIN=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_JPU=y
 CONFIG_VIDEO_RENESAS_VSP1=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
+CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_RCAR_DU=y
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FB_SH_MOBILE_MERAM=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_SH4_FSI=y
 CONFIG_SND_SOC_RCAR=y
+CONFIG_SND_SOC_RSRC_CARD=y
 CONFIG_SND_SOC_AK4642=y
 CONFIG_SND_SOC_WM8978=y
 CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_RCAR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_RCAR_PHY=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=y
 CONFIG_USB_ETH=y
@@ -172,9 +185,13 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_RS5C372=y
 CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_RX8581=y
+CONFIG_RTC_DRV_DA9063=y
 CONFIG_DMADEVICES=y
 CONFIG_SH_DMAE=y
 CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=y
+CONFIG_STAGING=y
+CONFIG_STAGING_BOARD=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AK8975=y
@@ -194,6 +211,7 @@ CONFIG_NFS_V4_1=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index a2956c311..9f84be5b3 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -1,5 +1,4 @@
 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -7,6 +6,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_CPUSETS=y
 CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
@@ -18,6 +18,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SOCFPGA=y
 CONFIG_ARM_THUMBEE=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_ALTERA=y
+CONFIG_PCIE_ALTERA_MSI=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_AEABI=y
@@ -36,7 +40,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-CONFIG_IPV6=y
 CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_VLAN_8021Q=y
 CONFIG_VLAN_8021Q_GVRP=y
@@ -50,16 +53,21 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_NVME=m
 CONFIG_SRAM=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_IXGBE=m
 CONFIG_STMMAC_ETH=y
-CONFIG_DWMAC_SOCFPGA=y
 CONFIG_MICREL_PHY=y
 CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_LEGACY_PTY_COUNT=16
@@ -79,18 +87,25 @@ CONFIG_SENSORS_LTC2978=y
 CONFIG_SENSORS_LTC2978_REGULATOR=y
 CONFIG_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
+CONFIG_MFD_STMPE=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_USB=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
 CONFIG_MMC=y
 CONFIG_MMC_DW=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
+CONFIG_DMATEST=m
+CONFIG_FPGA=y
+CONFIG_FPGA_MGR_SOCFPGA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_NTFS_RW=y
@@ -107,4 +122,3 @@ CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_ENABLE_DEFAULT_TRACERS=y
 CONFIG_DEBUG_USER=y
-CONFIG_XZ_DEC=y
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 4725fab56..1e5ec2a0e 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -52,8 +52,11 @@ CONFIG_SERIAL_STM32_CONSOLE=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 7ebc346bf..714da336e 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -1,21 +1,22 @@
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
 CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -29,10 +30,11 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_SUN4I=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_EEPROM_SUNXI_SID=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_AHCI_SUNXI=y
@@ -56,12 +58,13 @@ CONFIG_STMMAC_ETH=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUN4I_LRADC=y
 # CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AXP20X_PEK=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_SUN4I=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AXP20X_PEK=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
@@ -72,30 +75,47 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_SUN6I_P2WI=y
 CONFIG_SPI=y
 CONFIG_SPI_SUN4I=y
 CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
+CONFIG_AXP20X_POWER=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
 CONFIG_MFD_AXP20X=y
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_AXP20X_RSB=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_SUNXI=y
+CONFIG_DRM=y
+CONFIG_DRM_SUN4I=y
 CONFIG_FB=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SUN4I_CODEC=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
 CONFIG_MMC=y
 CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
@@ -109,9 +129,16 @@ CONFIG_RTC_CLASS=y
 # CONFIG_RTC_INTF_PROC is not set
 CONFIG_RTC_DRV_SUN6I=y
 CONFIG_RTC_DRV_SUNXI=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_SUN6I=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXTCON=y
+CONFIG_PWM=y
+CONFIG_PWM_SUN4I=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -123,3 +150,4 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
+CONFIG_CRYPTO_DEV_SUN4I_SS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index cdf9abb46..6012a1ec7 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -1,5 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -42,6 +43,7 @@ CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
@@ -59,7 +61,6 @@ CONFIG_INET_ESP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y
 CONFIG_INET6_AH=y
@@ -120,6 +121,9 @@ CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+# CONFIG_TOUCHSCREEN_WM9713 is not set
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
@@ -141,12 +145,12 @@ CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_BATTERY_SBS=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_POWER_RESET=y
@@ -182,11 +186,10 @@ CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=y
 CONFIG_USB_GSPCA=y
 CONFIG_DRM=y
+CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -196,14 +199,11 @@ CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_HDA=y
 CONFIG_SND_HDA_TEGRA=y
 CONFIG_SND_HDA_INPUT_BEEP=y
-CONFIG_SND_HDA_INPUT_JACK=y
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=y
 CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
@@ -212,11 +212,13 @@ CONFIG_SND_SOC_TEGRA=y
 CONFIG_SND_SOC_TEGRA_RT5640=y
 CONFIG_SND_SOC_TEGRA_WM8753=y
 CONFIG_SND_SOC_TEGRA_WM8903=y
+CONFIG_SND_SOC_TEGRA_WM9712=y
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
 CONFIG_SND_SOC_TEGRA_ALC5632=y
 CONFIG_SND_SOC_TEGRA_MAX98090=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_ACM=y
@@ -265,15 +267,14 @@ CONFIG_IIO=y
 CONFIG_AK8975=y
 CONFIG_PWM=y
 CONFIG_PWM_TEGRA=y
+CONFIG_PHY_TEGRA_XUSB=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -282,6 +283,7 @@ CONFIG_SQUASHFS=y
 CONFIG_SQUASHFS_LZO=y
 CONFIG_SQUASHFS_XZ=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
@@ -300,5 +302,4 @@ CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 932ee4e4a..0ada29d56 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -177,7 +177,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
 CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_SA1100=y
+CONFIG_RTC_DRV_PXA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -214,7 +214,6 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_USER=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=m
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 07055eacb..b7b09189f 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -45,7 +45,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
 CONFIG_SMSC_PHY=y
@@ -63,6 +62,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_BU21013=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
+CONFIG_RMI4_CORE=y
+CONFIG_RMI4_I2C=y
+CONFIG_RMI4_F11=y
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
@@ -104,12 +106,12 @@ CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
-CONFIG_STAGING=y
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
 CONFIG_HSEM_U8500=y
 CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
 CONFIG_IIO_ST_ACCEL_3AXIS=y
 CONFIG_IIO_ST_GYRO_3AXIS=y
+CONFIG_BH1780=y
 CONFIG_IIO_ST_MAGN_3AXIS=y
 CONFIG_IIO_ST_PRESS=y
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index ea49d3756..295408ea9 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,13 +1,15 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_VERSATILE=y
-CONFIG_MACH_VERSATILE_AB=y
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -47,9 +49,12 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_VERSATILE=y
+CONFIG_SPI=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_MFD_SYSCON=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -59,13 +64,15 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_ARMAACI=m
 CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=m
+CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_VERSATILE=y
+CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_EXT2_FS=y
 CONFIG_VFAT_FS=m
 CONFIG_JFFS2_FS=y
@@ -82,6 +89,5 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_PL01X=y
 CONFIG_FONTS=y
 CONFIG_FONT_ACORN_8x8=y
diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig
index b200bb0fe..d6253a48a 100644
--- a/arch/arm/configs/zx_defconfig
+++ b/arch/arm/configs/zx_defconfig
@@ -7,7 +7,6 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_NAMESPACES=y
@@ -83,7 +82,6 @@ CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
diff --git a/arch/arm/crypto/.gitignore b/arch/arm/crypto/.gitignore
index 6231d36b3..31e1f538d 100644
--- a/arch/arm/crypto/.gitignore
+++ b/arch/arm/crypto/.gitignore
@@ -1 +1,3 @@
 aesbs-core.S
+sha256-core.S
+sha512-core.S
diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c
index b445a5d56..aef022a87 100644
--- a/arch/arm/crypto/aes-ce-glue.c
+++ b/arch/arm/crypto/aes-ce-glue.c
@@ -15,6 +15,7 @@
 #include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <linux/module.h>
+#include <crypto/xts.h>
 
 MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
@@ -152,6 +153,10 @@ static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 	struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
 	int ret;
 
+	ret = xts_check_key(tfm, in_key, key_len);
+	if (ret)
+		return ret;
+
 	ret = ce_aes_expandkey(&ctx->key1, in_key, key_len / 2);
 	if (!ret)
 		ret = ce_aes_expandkey(&ctx->key2, &in_key[key_len / 2],
@@ -279,7 +284,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		err = blkcipher_walk_done(desc, &walk,
 					  walk.nbytes % AES_BLOCK_SIZE);
 	}
-	if (nbytes) {
+	if (walk.nbytes % AES_BLOCK_SIZE) {
 		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];
@@ -364,7 +369,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_blkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ce_aes_setkey,
 		.encrypt	= ecb_encrypt,
 		.decrypt	= ecb_decrypt,
@@ -441,7 +446,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_ablkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ablk_set_key,
 		.encrypt	= ablk_encrypt,
 		.decrypt	= ablk_decrypt,
diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c
index 6d6852986..0511a6caf 100644
--- a/arch/arm/crypto/aesbs-glue.c
+++ b/arch/arm/crypto/aesbs-glue.c
@@ -13,6 +13,7 @@
 #include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <linux/module.h>
+#include <crypto/xts.h>
 
 #include "aes_glue.h"
 
@@ -89,6 +90,11 @@ static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 {
 	struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm);
 	int bits = key_len * 4;
+	int err;
+
+	err = xts_check_key(tfm, in_key, key_len);
+	if (err)
+		return err;
 
 	if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) {
 		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c
index 03a39fe29..b88364aa1 100644
--- a/arch/arm/crypto/ghash-ce-glue.c
+++ b/arch/arm/crypto/ghash-ce-glue.c
@@ -154,30 +154,23 @@ static int ghash_async_init(struct ahash_request *req)
 	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
 	struct ahash_request *cryptd_req = ahash_request_ctx(req);
 	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+	struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm);
 
-	if (!may_use_simd()) {
-		memcpy(cryptd_req, req, sizeof(*req));
-		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
-		return crypto_ahash_init(cryptd_req);
-	} else {
-		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-		struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm);
-
-		desc->tfm = child;
-		desc->flags = req->base.flags;
-		return crypto_shash_init(desc);
-	}
+	desc->tfm = child;
+	desc->flags = req->base.flags;
+	return crypto_shash_init(desc);
 }
 
 static int ghash_async_update(struct ahash_request *req)
 {
 	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
 
-	if (!may_use_simd()) {
-		struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-		struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-		struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-
+	if (!may_use_simd() ||
+	    (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) {
 		memcpy(cryptd_req, req, sizeof(*req));
 		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
 		return crypto_ahash_update(cryptd_req);
@@ -190,12 +183,12 @@ static int ghash_async_update(struct ahash_request *req)
 static int ghash_async_final(struct ahash_request *req)
 {
 	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
 
-	if (!may_use_simd()) {
-		struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-		struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-		struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-
+	if (!may_use_simd() ||
+	    (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) {
 		memcpy(cryptd_req, req, sizeof(*req));
 		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
 		return crypto_ahash_final(cryptd_req);
@@ -212,7 +205,8 @@ static int ghash_async_digest(struct ahash_request *req)
 	struct ahash_request *cryptd_req = ahash_request_ctx(req);
 	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
 
-	if (!may_use_simd()) {
+	if (!may_use_simd() ||
+	    (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) {
 		memcpy(cryptd_req, req, sizeof(*req));
 		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
 		return crypto_ahash_digest(cryptd_req);
@@ -226,6 +220,27 @@ static int ghash_async_digest(struct ahash_request *req)
 	}
 }
 
+static int ghash_async_import(struct ahash_request *req, const void *in)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+
+	desc->tfm = cryptd_ahash_child(ctx->cryptd_tfm);
+	desc->flags = req->base.flags;
+
+	return crypto_shash_import(desc, in);
+}
+
+static int ghash_async_export(struct ahash_request *req, void *out)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+
+	return crypto_shash_export(desc, out);
+}
+
 static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key,
 			      unsigned int keylen)
 {
@@ -274,7 +289,10 @@ static struct ahash_alg ghash_async_alg = {
 	.final			= ghash_async_final,
 	.setkey			= ghash_async_setkey,
 	.digest			= ghash_async_digest,
+	.import			= ghash_async_import,
+	.export			= ghash_async_export,
 	.halg.digestsize	= GHASH_DIGEST_SIZE,
+	.halg.statesize		= sizeof(struct ghash_desc_ctx),
 	.halg.base		= {
 		.cra_name	= "ghash",
 		.cra_driver_name = "ghash-ce",
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 30b3bc166..55e0e3ea9 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -1,8 +1,10 @@
 
 
 generic-y += bitsperlong.h
+generic-y += clkdev.h
 generic-y += cputime.h
 generic-y += current.h
+generic-y += early_ioremap.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
@@ -12,9 +14,9 @@ generic-y += irq_regs.h
 generic-y += kdebug.h
 generic-y += local.h
 generic-y += local64.h
-generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
 generic-y += msgbuf.h
+generic-y += msi.h
 generic-y += param.h
 generic-y += parport.h
 generic-y += poll.h
@@ -22,7 +24,6 @@ generic-y += preempt.h
 generic-y += resource.h
 generic-y += rwsem.h
 generic-y += seccomp.h
-generic-y += sections.h
 generic-y += segment.h
 generic-y += sembuf.h
 generic-y += serial.h
diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
new file mode 100644
index 000000000..e08d15184
--- /dev/null
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -0,0 +1,190 @@
+/*
+ * arch/arm/include/asm/arch_gicv3.h
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_ARCH_GICV3_H
+#define __ASM_ARCH_GICV3_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/io.h>
+#include <asm/barrier.h>
+
+#define __ACCESS_CP15(CRn, Op1, CRm, Op2)	p15, Op1, %0, CRn, CRm, Op2
+#define __ACCESS_CP15_64(Op1, CRm)		p15, Op1, %Q0, %R0, CRm
+
+#define ICC_EOIR1			__ACCESS_CP15(c12, 0, c12, 1)
+#define ICC_DIR				__ACCESS_CP15(c12, 0, c11, 1)
+#define ICC_IAR1			__ACCESS_CP15(c12, 0, c12, 0)
+#define ICC_SGI1R			__ACCESS_CP15_64(0, c12)
+#define ICC_PMR				__ACCESS_CP15(c4, 0, c6, 0)
+#define ICC_CTLR			__ACCESS_CP15(c12, 0, c12, 4)
+#define ICC_SRE				__ACCESS_CP15(c12, 0, c12, 5)
+#define ICC_IGRPEN1			__ACCESS_CP15(c12, 0, c12, 7)
+
+#define ICC_HSRE			__ACCESS_CP15(c12, 4, c9, 5)
+
+#define ICH_VSEIR			__ACCESS_CP15(c12, 4, c9, 4)
+#define ICH_HCR				__ACCESS_CP15(c12, 4, c11, 0)
+#define ICH_VTR				__ACCESS_CP15(c12, 4, c11, 1)
+#define ICH_MISR			__ACCESS_CP15(c12, 4, c11, 2)
+#define ICH_EISR			__ACCESS_CP15(c12, 4, c11, 3)
+#define ICH_ELSR			__ACCESS_CP15(c12, 4, c11, 5)
+#define ICH_VMCR			__ACCESS_CP15(c12, 4, c11, 7)
+
+#define __LR0(x)			__ACCESS_CP15(c12, 4, c12, x)
+#define __LR8(x)			__ACCESS_CP15(c12, 4, c13, x)
+
+#define ICH_LR0				__LR0(0)
+#define ICH_LR1				__LR0(1)
+#define ICH_LR2				__LR0(2)
+#define ICH_LR3				__LR0(3)
+#define ICH_LR4				__LR0(4)
+#define ICH_LR5				__LR0(5)
+#define ICH_LR6				__LR0(6)
+#define ICH_LR7				__LR0(7)
+#define ICH_LR8				__LR8(0)
+#define ICH_LR9				__LR8(1)
+#define ICH_LR10			__LR8(2)
+#define ICH_LR11			__LR8(3)
+#define ICH_LR12			__LR8(4)
+#define ICH_LR13			__LR8(5)
+#define ICH_LR14			__LR8(6)
+#define ICH_LR15			__LR8(7)
+
+/* LR top half */
+#define __LRC0(x)			__ACCESS_CP15(c12, 4, c14, x)
+#define __LRC8(x)			__ACCESS_CP15(c12, 4, c15, x)
+
+#define ICH_LRC0			__LRC0(0)
+#define ICH_LRC1			__LRC0(1)
+#define ICH_LRC2			__LRC0(2)
+#define ICH_LRC3			__LRC0(3)
+#define ICH_LRC4			__LRC0(4)
+#define ICH_LRC5			__LRC0(5)
+#define ICH_LRC6			__LRC0(6)
+#define ICH_LRC7			__LRC0(7)
+#define ICH_LRC8			__LRC8(0)
+#define ICH_LRC9			__LRC8(1)
+#define ICH_LRC10			__LRC8(2)
+#define ICH_LRC11			__LRC8(3)
+#define ICH_LRC12			__LRC8(4)
+#define ICH_LRC13			__LRC8(5)
+#define ICH_LRC14			__LRC8(6)
+#define ICH_LRC15			__LRC8(7)
+
+#define __AP0Rx(x)			__ACCESS_CP15(c12, 4, c8, x)
+#define ICH_AP0R0			__AP0Rx(0)
+#define ICH_AP0R1			__AP0Rx(1)
+#define ICH_AP0R2			__AP0Rx(2)
+#define ICH_AP0R3			__AP0Rx(3)
+
+#define __AP1Rx(x)			__ACCESS_CP15(c12, 4, c9, x)
+#define ICH_AP1R0			__AP1Rx(0)
+#define ICH_AP1R1			__AP1Rx(1)
+#define ICH_AP1R2			__AP1Rx(2)
+#define ICH_AP1R3			__AP1Rx(3)
+
+/* Low-level accessors */
+
+static inline void gic_write_eoir(u32 irq)
+{
+	asm volatile("mcr " __stringify(ICC_EOIR1) : : "r" (irq));
+	isb();
+}
+
+static inline void gic_write_dir(u32 val)
+{
+	asm volatile("mcr " __stringify(ICC_DIR) : : "r" (val));
+	isb();
+}
+
+static inline u32 gic_read_iar(void)
+{
+	u32 irqstat;
+
+	asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat));
+	dsb(sy);
+	return irqstat;
+}
+
+static inline void gic_write_pmr(u32 val)
+{
+	asm volatile("mcr " __stringify(ICC_PMR) : : "r" (val));
+}
+
+static inline void gic_write_ctlr(u32 val)
+{
+	asm volatile("mcr " __stringify(ICC_CTLR) : : "r" (val));
+	isb();
+}
+
+static inline void gic_write_grpen1(u32 val)
+{
+	asm volatile("mcr " __stringify(ICC_IGRPEN1) : : "r" (val));
+	isb();
+}
+
+static inline void gic_write_sgi1r(u64 val)
+{
+	asm volatile("mcrr " __stringify(ICC_SGI1R) : : "r" (val));
+}
+
+static inline u32 gic_read_sre(void)
+{
+	u32 val;
+
+	asm volatile("mrc " __stringify(ICC_SRE) : "=r" (val));
+	return val;
+}
+
+static inline void gic_write_sre(u32 val)
+{
+	asm volatile("mcr " __stringify(ICC_SRE) : : "r" (val));
+	isb();
+}
+
+/*
+ * Even in 32bit systems that use LPAE, there is no guarantee that the I/O
+ * interface provides true 64bit atomic accesses, so using strd/ldrd doesn't
+ * make much sense.
+ * Moreover, 64bit I/O emulation is extremely difficult to implement on
+ * AArch32, since the syndrome register doesn't provide any information for
+ * them.
+ * Consequently, the following IO helpers use 32bit accesses.
+ *
+ * There are only two registers that need 64bit accesses in this driver:
+ * - GICD_IROUTERn, contain the affinity values associated to each interrupt.
+ *   The upper-word (aff3) will always be 0, so there is no need for a lock.
+ * - GICR_TYPER is an ID register and doesn't need atomicity.
+ */
+static inline void gic_write_irouter(u64 val, volatile void __iomem *addr)
+{
+	writel_relaxed((u32)val, addr);
+	writel_relaxed((u32)(val >> 32), addr + 4);
+}
+
+static inline u64 gic_read_typer(const volatile void __iomem *addr)
+{
+	u64 val;
+
+	val = readl_relaxed(addr);
+	val |= (u64)readl_relaxed(addr + 4) << 32;
+	return val;
+}
+
+#endif /* !__ASSEMBLY__ */
+#endif /* !__ASM_ARCH_GICV3_H */
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 4abe57279..4eaea2173 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -108,33 +108,37 @@
 	.endm
 #endif
 
-	.macro asm_trace_hardirqs_off
+	.macro asm_trace_hardirqs_off, save=1
 #if defined(CONFIG_TRACE_IRQFLAGS)
+	.if \save
 	stmdb   sp!, {r0-r3, ip, lr}
+	.endif
 	bl	trace_hardirqs_off
+	.if \save
 	ldmia	sp!, {r0-r3, ip, lr}
+	.endif
 #endif
 	.endm
 
-	.macro asm_trace_hardirqs_on_cond, cond
+	.macro asm_trace_hardirqs_on, cond=al, save=1
 #if defined(CONFIG_TRACE_IRQFLAGS)
 	/*
 	 * actually the registers should be pushed and pop'd conditionally, but
 	 * after bl the flags are certainly clobbered
 	 */
+	.if \save
 	stmdb   sp!, {r0-r3, ip, lr}
+	.endif
 	bl\cond	trace_hardirqs_on
+	.if \save
 	ldmia	sp!, {r0-r3, ip, lr}
+	.endif
 #endif
 	.endm
 
-	.macro asm_trace_hardirqs_on
-	asm_trace_hardirqs_on_cond al
-	.endm
-
-	.macro disable_irq
+	.macro disable_irq, save=1
 	disable_irq_notrace
-	asm_trace_hardirqs_off
+	asm_trace_hardirqs_off \save
 	.endm
 
 	.macro enable_irq
@@ -173,7 +177,7 @@
 
 	.macro restore_irqs, oldcpsr
 	tst	\oldcpsr, #PSR_I_BIT
-	asm_trace_hardirqs_on_cond eq
+	asm_trace_hardirqs_on cond=eq
 	restore_irqs_notrace \oldcpsr
 	.endm
 
@@ -445,6 +449,48 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 #endif
 	.endm
 
+	.macro	uaccess_disable, tmp, isb=1
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/*
+	 * Whenever we re-enter userspace, the domains should always be
+	 * set appropriately.
+	 */
+	mov	\tmp, #DACR_UACCESS_DISABLE
+	mcr	p15, 0, \tmp, c3, c0, 0		@ Set domain register
+	.if	\isb
+	instr_sync
+	.endif
+#endif
+	.endm
+
+	.macro	uaccess_enable, tmp, isb=1
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/*
+	 * Whenever we re-enter userspace, the domains should always be
+	 * set appropriately.
+	 */
+	mov	\tmp, #DACR_UACCESS_ENABLE
+	mcr	p15, 0, \tmp, c3, c0, 0
+	.if	\isb
+	instr_sync
+	.endif
+#endif
+	.endm
+
+	.macro	uaccess_save, tmp
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	mrc	p15, 0, \tmp, c3, c0, 0
+	str	\tmp, [sp, #SVC_DACR]
+#endif
+	.endm
+
+	.macro	uaccess_restore
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	ldr	r0, [sp, #SVC_DACR]
+	mcr	p15, 0, r0, c3, c0, 0
+#endif
+	.endm
+
 	.irp	c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
 	.macro	ret\c, reg
 #if __LINUX_ARM_ARCH__ < 6
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index e22c11970..66d0e215a 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -27,8 +27,8 @@
  * strex/ldrex monitor on some implementations. The reason we can use it for
  * atomic_set() is the clrex or dummy strex done on every exception return.
  */
-#define atomic_read(v)	ACCESS_ONCE((v)->counter)
-#define atomic_set(v,i)	(((v)->counter) = (i))
+#define atomic_read(v)	READ_ONCE((v)->counter)
+#define atomic_set(v,i)	WRITE_ONCE(((v)->counter), (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
 
@@ -57,12 +57,11 @@ static inline void atomic_##op(int i, atomic_t *v)			\
 }									\
 
 #define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int atomic_##op##_return(int i, atomic_t *v)		\
+static inline int atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 {									\
 	unsigned long tmp;						\
 	int result;							\
 									\
-	smp_mb();							\
 	prefetchw(&v->counter);						\
 									\
 	__asm__ __volatile__("@ atomic_" #op "_return\n"		\
@@ -75,17 +74,45 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	: "r" (&v->counter), "Ir" (i)					\
 	: "cc");							\
 									\
-	smp_mb();							\
+	return result;							\
+}
+
+#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
+static inline int atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
+{									\
+	unsigned long tmp;						\
+	int result, val;						\
+									\
+	prefetchw(&v->counter);						\
+									\
+	__asm__ __volatile__("@ atomic_fetch_" #op "\n"			\
+"1:	ldrex	%0, [%4]\n"						\
+"	" #asm_op "	%1, %0, %5\n"					\
+"	strex	%2, %1, [%4]\n"						\
+"	teq	%2, #0\n"						\
+"	bne	1b"							\
+	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Qo" (v->counter)	\
+	: "r" (&v->counter), "Ir" (i)					\
+	: "cc");							\
 									\
 	return result;							\
 }
 
-static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
+#define atomic_add_return_relaxed	atomic_add_return_relaxed
+#define atomic_sub_return_relaxed	atomic_sub_return_relaxed
+#define atomic_fetch_add_relaxed	atomic_fetch_add_relaxed
+#define atomic_fetch_sub_relaxed	atomic_fetch_sub_relaxed
+
+#define atomic_fetch_and_relaxed	atomic_fetch_and_relaxed
+#define atomic_fetch_andnot_relaxed	atomic_fetch_andnot_relaxed
+#define atomic_fetch_or_relaxed		atomic_fetch_or_relaxed
+#define atomic_fetch_xor_relaxed	atomic_fetch_xor_relaxed
+
+static inline int atomic_cmpxchg_relaxed(atomic_t *ptr, int old, int new)
 {
 	int oldval;
 	unsigned long res;
 
-	smp_mb();
 	prefetchw(&ptr->counter);
 
 	do {
@@ -99,10 +126,9 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 		    : "cc");
 	} while (res);
 
-	smp_mb();
-
 	return oldval;
 }
+#define atomic_cmpxchg_relaxed		atomic_cmpxchg_relaxed
 
 static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 {
@@ -161,6 +187,20 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	return val;							\
 }
 
+#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
+static inline int atomic_fetch_##op(int i, atomic_t *v)			\
+{									\
+	unsigned long flags;						\
+	int val;							\
+									\
+	raw_local_irq_save(flags);					\
+	val = v->counter;						\
+	v->counter c_op i;						\
+	raw_local_irq_restore(flags);					\
+									\
+	return val;							\
+}
+
 static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 	int ret;
@@ -189,12 +229,26 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #define ATOMIC_OPS(op, c_op, asm_op)					\
 	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_OP_RETURN(op, c_op, asm_op)
+	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
 
 ATOMIC_OPS(add, +=, add)
 ATOMIC_OPS(sub, -=, sub)
 
+#define atomic_andnot atomic_andnot
+
 #undef ATOMIC_OPS
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(and, &=, and)
+ATOMIC_OPS(andnot, &= ~, bic)
+ATOMIC_OPS(or,  |=, orr)
+ATOMIC_OPS(xor, ^=, eor)
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
@@ -205,8 +259,8 @@ ATOMIC_OPS(sub, -=, sub)
 
 #define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
 #define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
-#define atomic_inc_return(v)    (atomic_add_return(1, v))
-#define atomic_dec_return(v)    (atomic_sub_return(1, v))
+#define atomic_inc_return_relaxed(v)    (atomic_add_return_relaxed(1, v))
+#define atomic_dec_return_relaxed(v)    (atomic_sub_return_relaxed(1, v))
 #define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
 
 #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
@@ -290,12 +344,12 @@ static inline void atomic64_##op(long long i, atomic64_t *v)		\
 }									\
 
 #define ATOMIC64_OP_RETURN(op, op1, op2)				\
-static inline long long atomic64_##op##_return(long long i, atomic64_t *v) \
+static inline long long							\
+atomic64_##op##_return_relaxed(long long i, atomic64_t *v)		\
 {									\
 	long long result;						\
 	unsigned long tmp;						\
 									\
-	smp_mb();							\
 	prefetchw(&v->counter);						\
 									\
 	__asm__ __volatile__("@ atomic64_" #op "_return\n"		\
@@ -309,29 +363,73 @@ static inline long long atomic64_##op##_return(long long i, atomic64_t *v) \
 	: "r" (&v->counter), "r" (i)					\
 	: "cc");							\
 									\
-	smp_mb();							\
+	return result;							\
+}
+
+#define ATOMIC64_FETCH_OP(op, op1, op2)					\
+static inline long long							\
+atomic64_fetch_##op##_relaxed(long long i, atomic64_t *v)		\
+{									\
+	long long result, val;						\
+	unsigned long tmp;						\
+									\
+	prefetchw(&v->counter);						\
+									\
+	__asm__ __volatile__("@ atomic64_fetch_" #op "\n"		\
+"1:	ldrexd	%0, %H0, [%4]\n"					\
+"	" #op1 " %Q1, %Q0, %Q5\n"					\
+"	" #op2 " %R1, %R0, %R5\n"					\
+"	strexd	%2, %1, %H1, [%4]\n"					\
+"	teq	%2, #0\n"						\
+"	bne	1b"							\
+	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Qo" (v->counter)	\
+	: "r" (&v->counter), "r" (i)					\
+	: "cc");							\
 									\
 	return result;							\
 }
 
 #define ATOMIC64_OPS(op, op1, op2)					\
 	ATOMIC64_OP(op, op1, op2)					\
-	ATOMIC64_OP_RETURN(op, op1, op2)
+	ATOMIC64_OP_RETURN(op, op1, op2)				\
+	ATOMIC64_FETCH_OP(op, op1, op2)
 
 ATOMIC64_OPS(add, adds, adc)
 ATOMIC64_OPS(sub, subs, sbc)
 
+#define atomic64_add_return_relaxed	atomic64_add_return_relaxed
+#define atomic64_sub_return_relaxed	atomic64_sub_return_relaxed
+#define atomic64_fetch_add_relaxed	atomic64_fetch_add_relaxed
+#define atomic64_fetch_sub_relaxed	atomic64_fetch_sub_relaxed
+
 #undef ATOMIC64_OPS
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+#define atomic64_andnot atomic64_andnot
+
+ATOMIC64_OPS(and, and, and)
+ATOMIC64_OPS(andnot, bic, bic)
+ATOMIC64_OPS(or,  orr, orr)
+ATOMIC64_OPS(xor, eor, eor)
+
+#define atomic64_fetch_and_relaxed	atomic64_fetch_and_relaxed
+#define atomic64_fetch_andnot_relaxed	atomic64_fetch_andnot_relaxed
+#define atomic64_fetch_or_relaxed	atomic64_fetch_or_relaxed
+#define atomic64_fetch_xor_relaxed	atomic64_fetch_xor_relaxed
+
+#undef ATOMIC64_OPS
+#undef ATOMIC64_FETCH_OP
 #undef ATOMIC64_OP_RETURN
 #undef ATOMIC64_OP
 
-static inline long long atomic64_cmpxchg(atomic64_t *ptr, long long old,
-					long long new)
+static inline long long
+atomic64_cmpxchg_relaxed(atomic64_t *ptr, long long old, long long new)
 {
 	long long oldval;
 	unsigned long res;
 
-	smp_mb();
 	prefetchw(&ptr->counter);
 
 	do {
@@ -346,17 +444,15 @@ static inline long long atomic64_cmpxchg(atomic64_t *ptr, long long old,
 		: "cc");
 	} while (res);
 
-	smp_mb();
-
 	return oldval;
 }
+#define atomic64_cmpxchg_relaxed	atomic64_cmpxchg_relaxed
 
-static inline long long atomic64_xchg(atomic64_t *ptr, long long new)
+static inline long long atomic64_xchg_relaxed(atomic64_t *ptr, long long new)
 {
 	long long result;
 	unsigned long tmp;
 
-	smp_mb();
 	prefetchw(&ptr->counter);
 
 	__asm__ __volatile__("@ atomic64_xchg\n"
@@ -368,10 +464,9 @@ static inline long long atomic64_xchg(atomic64_t *ptr, long long new)
 	: "r" (&ptr->counter), "r" (new)
 	: "cc");
 
-	smp_mb();
-
 	return result;
 }
+#define atomic64_xchg_relaxed		atomic64_xchg_relaxed
 
 static inline long long atomic64_dec_if_positive(atomic64_t *v)
 {
@@ -433,11 +528,11 @@ static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 
 #define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
 #define atomic64_inc(v)			atomic64_add(1LL, (v))
-#define atomic64_inc_return(v)		atomic64_add_return(1LL, (v))
+#define atomic64_inc_return_relaxed(v)	atomic64_add_return_relaxed(1LL, (v))
 #define atomic64_inc_and_test(v)	(atomic64_inc_return(v) == 0)
 #define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
 #define atomic64_dec(v)			atomic64_sub(1LL, (v))
-#define atomic64_dec_return(v)		atomic64_sub_return(1LL, (v))
+#define atomic64_dec_return_relaxed(v)	atomic64_sub_return_relaxed(1LL, (v))
 #define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
 #define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1LL, 0LL)
 
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 6c2327e1c..f5d698182 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -2,7 +2,6 @@
 #define __ASM_BARRIER_H
 
 #ifndef __ASSEMBLY__
-#include <asm/outercache.h>
 
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
@@ -37,12 +36,18 @@
 #define dmb(x) __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#ifdef CONFIG_ARCH_HAS_BARRIERS
-#include <mach/barriers.h>
-#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
-#define mb()		do { dsb(); outer_sync(); } while (0)
+#ifdef CONFIG_ARM_HEAVY_MB
+extern void (*soc_mb)(void);
+extern void arm_heavy_mb(void);
+#define __arm_heavy_mb(x...) do { dsb(x); arm_heavy_mb(); } while (0)
+#else
+#define __arm_heavy_mb(x...) dsb(x)
+#endif
+
+#if defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
+#define mb()		__arm_heavy_mb()
 #define rmb()		dsb()
-#define wmb()		do { dsb(st); outer_sync(); } while (0)
+#define wmb()		__arm_heavy_mb(st)
 #define dma_rmb()	dmb(osh)
 #define dma_wmb()	dmb(oshst)
 #else
@@ -53,38 +58,11 @@
 #define dma_wmb()	barrier()
 #endif
 
-#ifndef CONFIG_SMP
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#else
-#define smp_mb()	dmb(ish)
-#define smp_rmb()	smp_mb()
-#define smp_wmb()	dmb(ishst)
-#endif
-
-#define smp_store_release(p, v)						\
-do {									\
-	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
-	ACCESS_ONCE(*p) = (v);						\
-} while (0)
-
-#define smp_load_acquire(p)						\
-({									\
-	typeof(*p) ___p1 = ACCESS_ONCE(*p);				\
-	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
-	___p1;								\
-})
-
-#define read_barrier_depends()		do { } while(0)
-#define smp_read_barrier_depends()	do { } while(0)
-
-#define smp_store_mb(var, value)	do { WRITE_ONCE(var, value); smp_mb(); } while (0)
+#define __smp_mb()	dmb(ish)
+#define __smp_rmb()	__smp_mb()
+#define __smp_wmb()	dmb(ishst)
 
-#define smp_mb__before_atomic()	smp_mb()
-#define smp_mb__after_atomic()	smp_mb()
+#include <asm-generic/barrier.h>
 
 #endif /* !__ASSEMBLY__ */
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 56380995f..e943e6cee 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -35,9 +35,9 @@
 static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
 {
 	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
+	unsigned long mask = BIT_MASK(bit);
 
-	p += bit >> 5;
+	p += BIT_WORD(bit);
 
 	raw_local_irq_save(flags);
 	*p |= mask;
@@ -47,9 +47,9 @@ static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *
 static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
 {
 	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
+	unsigned long mask = BIT_MASK(bit);
 
-	p += bit >> 5;
+	p += BIT_WORD(bit);
 
 	raw_local_irq_save(flags);
 	*p &= ~mask;
@@ -59,9 +59,9 @@ static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long
 static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
 {
 	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
+	unsigned long mask = BIT_MASK(bit);
 
-	p += bit >> 5;
+	p += BIT_WORD(bit);
 
 	raw_local_irq_save(flags);
 	*p ^= mask;
@@ -73,9 +73,9 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
 {
 	unsigned long flags;
 	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
+	unsigned long mask = BIT_MASK(bit);
 
-	p += bit >> 5;
+	p += BIT_WORD(bit);
 
 	raw_local_irq_save(flags);
 	res = *p;
@@ -90,9 +90,9 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
 {
 	unsigned long flags;
 	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
+	unsigned long mask = BIT_MASK(bit);
 
-	p += bit >> 5;
+	p += BIT_WORD(bit);
 
 	raw_local_irq_save(flags);
 	res = *p;
@@ -107,9 +107,9 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
 {
 	unsigned long flags;
 	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
+	unsigned long mask = BIT_MASK(bit);
 
-	p += bit >> 5;
+	p += BIT_WORD(bit);
 
 	raw_local_irq_save(flags);
 	res = *p;
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index b274bde24..4e6e88a6b 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -5,8 +5,6 @@
 #include <linux/types.h>
 #include <asm/opcodes.h>
 
-#ifdef CONFIG_BUG
-
 /*
  * Use a suitable undefined instruction to use for ARM/Thumb2 bug handling.
  * We need to be careful not to conflict with those used by other modules and
@@ -40,13 +38,14 @@ do {								\
 		"2:\t.asciz " #__file "\n" 			\
 		".popsection\n" 				\
 		".pushsection __bug_table,\"a\"\n"		\
+		".align 2\n"					\
 		"3:\t.word 1b, 2b\n"				\
 		"\t.hword " #__line ", 0\n"			\
 		".popsection");					\
 	unreachable();						\
 } while (0)
 
-#else  /* not CONFIG_DEBUG_BUGVERBOSE */
+#else
 
 #define __BUG(__file, __line, __value)				\
 do {								\
@@ -56,7 +55,6 @@ do {								\
 #endif  /* CONFIG_DEBUG_BUGVERBOSE */
 
 #define HAVE_ARCH_BUG
-#endif  /* CONFIG_BUG */
 
 #include <asm-generic/bug.h>
 
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 4812cda8f..9156fc303 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -140,8 +140,6 @@ extern struct cpu_cache_fns cpu_cache;
  * is visible to DMA, or data written by DMA to system memory is
  * visible to the CPU.
  */
-#define dmac_map_area			cpu_cache.dma_map_area
-#define dmac_unmap_area			cpu_cache.dma_unmap_area
 #define dmac_flush_range		cpu_cache.dma_flush_range
 
 #else
@@ -161,8 +159,6 @@ extern void __cpuc_flush_dcache_area(void *, size_t);
  * is visible to DMA, or data written by DMA to system memory is
  * visible to the CPU.
  */
-extern void dmac_map_area(const void *, size_t, int);
-extern void dmac_unmap_area(const void *, size_t, int);
 extern void dmac_flush_range(const void *, const void *);
 
 #endif
@@ -495,7 +491,6 @@ static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
 #endif
 
 #ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void);
 void set_kernel_text_rw(void);
 void set_kernel_text_ro(void);
 #else
@@ -506,4 +501,21 @@ static inline void set_kernel_text_ro(void) { }
 void flush_uprobe_xol_access(struct page *page, unsigned long uaddr,
 			     void *kaddr, unsigned long len);
 
+/**
+ * secure_flush_area - ensure coherency across the secure boundary
+ * @addr: virtual address
+ * @size: size of region
+ *
+ * Ensure that the specified area of memory is coherent across the secure
+ * boundary from the non-secure side.  This is used when calling secure
+ * firmware where the secure firmware does not ensure coherency.
+ */
+static inline void secure_flush_area(const void *addr, size_t size)
+{
+	phys_addr_t phys = __pa(addr);
+
+	__cpuc_flush_dcache_area((void *)addr, size);
+	outer_flush_range(phys, phys + size);
+}
+
 #endif
diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h
index 523315115..524692f4a 100644
--- a/arch/arm/include/asm/checksum.h
+++ b/arch/arm/include/asm/checksum.h
@@ -84,10 +84,10 @@ ip_fast_csum(const void *iph, unsigned int ihl)
 }
 
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
-	u32 lenprot = len | proto << 16;
+	u32 lenprot = len + proto;
 	if (__builtin_constant_p(sum) && sum == 0) {
 		__asm__(
 		"adds	%0, %1, %2	@ csum_tcpudp_nofold0	\n\t"
@@ -121,8 +121,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len,
+		  __u8 proto, __wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
 }
@@ -144,8 +144,8 @@ __csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __
 		__be32 proto, __wsum sum);
 
 static inline __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len,
-		unsigned short proto, __wsum sum)
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+		__u32 len, __u8 proto, __wsum sum)
 {
 	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
 					   htonl(proto), sum));
diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h
deleted file mode 100644
index 4e8a4b27d..000000000
--- a/arch/arm/include/asm/clkdev.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/include/asm/clkdev.h
- *
- *  Copyright (C) 2008 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Helper for the clk API to assist looking up a struct clk.
- */
-#ifndef __ASM_CLKDEV_H
-#define __ASM_CLKDEV_H
-
-#include <linux/slab.h>
-
-#ifndef CONFIG_COMMON_CLK
-#ifdef CONFIG_HAVE_MACH_CLKDEV
-#include <mach/clkdev.h>
-#else
-#define __clk_get(clk)	({ 1; })
-#define __clk_put(clk)	do { } while (0)
-#endif
-#endif
-
-static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
-{
-	return kzalloc(size, GFP_KERNEL);
-}
-
-#endif
diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h
index 1692a05d3..97882f9ba 100644
--- a/arch/arm/include/asm/cmpxchg.h
+++ b/arch/arm/include/asm/cmpxchg.h
@@ -35,11 +35,11 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 	unsigned int tmp;
 #endif
 
-	smp_mb();
 	prefetchw((const void *)ptr);
 
 	switch (size) {
 #if __LINUX_ARM_ARCH__ >= 6
+#ifndef CONFIG_CPU_V6 /* MIN ARCH >= V6K */
 	case 1:
 		asm volatile("@	__xchg1\n"
 		"1:	ldrexb	%0, [%3]\n"
@@ -50,6 +50,17 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 			: "r" (x), "r" (ptr)
 			: "memory", "cc");
 		break;
+	case 2:
+		asm volatile("@	__xchg2\n"
+		"1:	ldrexh	%0, [%3]\n"
+		"	strexh	%1, %2, [%3]\n"
+		"	teq	%1, #0\n"
+		"	bne	1b"
+			: "=&r" (ret), "=&r" (tmp)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+#endif
 	case 4:
 		asm volatile("@	__xchg4\n"
 		"1:	ldrex	%0, [%3]\n"
@@ -98,12 +109,11 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 		__bad_xchg(ptr, size), ret = 0;
 		break;
 	}
-	smp_mb();
 
 	return ret;
 }
 
-#define xchg(ptr, x) ({							\
+#define xchg_relaxed(ptr, x) ({						\
 	(__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr),		\
 				   sizeof(*(ptr)));			\
 })
@@ -117,6 +127,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 #error "SMP is not supported on this platform"
 #endif
 
+#define xchg xchg_relaxed
+
 /*
  * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
  * them available.
@@ -194,23 +206,11 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 	return oldval;
 }
 
-static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
-					 unsigned long new, int size)
-{
-	unsigned long ret;
-
-	smp_mb();
-	ret = __cmpxchg(ptr, old, new, size);
-	smp_mb();
-
-	return ret;
-}
-
-#define cmpxchg(ptr,o,n) ({						\
-	(__typeof__(*(ptr)))__cmpxchg_mb((ptr),				\
-					 (unsigned long)(o),		\
-					 (unsigned long)(n),		\
-					 sizeof(*(ptr)));		\
+#define cmpxchg_relaxed(ptr,o,n) ({					\
+	(__typeof__(*(ptr)))__cmpxchg((ptr),				\
+				      (unsigned long)(o),		\
+				      (unsigned long)(n),		\
+				      sizeof(*(ptr)));			\
 })
 
 static inline unsigned long __cmpxchg_local(volatile void *ptr,
@@ -273,25 +273,6 @@ static inline unsigned long long __cmpxchg64(unsigned long long *ptr,
 
 #define cmpxchg64_local(ptr, o, n) cmpxchg64_relaxed((ptr), (o), (n))
 
-static inline unsigned long long __cmpxchg64_mb(unsigned long long *ptr,
-						unsigned long long old,
-						unsigned long long new)
-{
-	unsigned long long ret;
-
-	smp_mb();
-	ret = __cmpxchg64(ptr, old, new);
-	smp_mb();
-
-	return ret;
-}
-
-#define cmpxchg64(ptr, o, n) ({						\
-	(__typeof__(*(ptr)))__cmpxchg64_mb((ptr),			\
-					   (unsigned long long)(o),	\
-					   (unsigned long long)(n));	\
-})
-
 #endif	/* __LINUX_ARM_ARCH__ >= 6 */
 
 #endif /* __ASM_ARM_CMPXCHG_H */
diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h
index 0f8424924..baefe1d51 100644
--- a/arch/arm/include/asm/cpuidle.h
+++ b/arch/arm/include/asm/cpuidle.h
@@ -30,13 +30,13 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
 struct device_node;
 
 struct cpuidle_ops {
-	int (*suspend)(int cpu, unsigned long arg);
+	int (*suspend)(unsigned long arg);
 	int (*init)(struct device_node *, int cpu);
 };
 
 struct of_cpuidle_method {
 	const char *method;
-	struct cpuidle_ops *ops;
+	const struct cpuidle_ops *ops;
 };
 
 #define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops)			\
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 85e374f87..1ee94c716 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -228,10 +228,26 @@ static inline int cpu_is_xsc3(void)
 }
 #endif
 
-#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
-#define	cpu_is_xscale()	0
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) && \
+    !defined(CONFIG_CPU_MOHAWK)
+#define	cpu_is_xscale_family() 0
 #else
-#define	cpu_is_xscale()	1
+static inline int cpu_is_xscale_family(void)
+{
+	unsigned int id;
+	id = read_cpuid_id() & 0xffffe000;
+
+	switch (id) {
+	case 0x69052000: /* Intel XScale 1 */
+	case 0x69054000: /* Intel XScale 2 */
+	case 0x69056000: /* Intel XScale 3 */
+	case 0x56056000: /* Marvell XScale 3 */
+	case 0x56158000: /* Marvell Mohawk */
+		return 1;
+	}
+
+	return 0;
+}
 #endif
 
 /*
@@ -260,7 +276,7 @@ static inline int __attribute_const__ cpuid_feature_extract_field(u32 features,
 	int feature = (features >> field) & 15;
 
 	/* feature registers are signed values */
-	if (feature > 8)
+	if (feature > 7)
 		feature -= 16;
 
 	return feature;
diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h
index dff714d88..b1ce037e4 100644
--- a/arch/arm/include/asm/delay.h
+++ b/arch/arm/include/asm/delay.h
@@ -10,8 +10,8 @@
 #include <asm/param.h>	/* HZ */
 
 #define MAX_UDELAY_MS	2
-#define UDELAY_MULT	((UL(2199023) * HZ) >> 11)
-#define UDELAY_SHIFT	30
+#define UDELAY_MULT	UL(2147 * HZ + 483648 * HZ / 1000000)
+#define UDELAY_SHIFT	31
 
 #ifndef __ASSEMBLY__
 
@@ -34,7 +34,7 @@ extern struct arm_delay_ops {
  * it, it means that you're calling udelay() with an out of range value.
  *
  * With currently imposed limits, this means that we support a max delay
- * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
+ * of 2000us. Further limits: HZ<=1000
  */
 extern void __bad_udelay(void);
 
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
index 662c7bd06..7d919a9b3 100644
--- a/arch/arm/include/asm/div64.h
+++ b/arch/arm/include/asm/div64.h
@@ -5,9 +5,9 @@
 #include <asm/compiler.h>
 
 /*
- * The semantics of do_div() are:
+ * The semantics of __div64_32() are:
  *
- * uint32_t do_div(uint64_t *n, uint32_t base)
+ * uint32_t __div64_32(uint64_t *n, uint32_t base)
  * {
  * 	uint32_t remainder = *n % base;
  * 	*n = *n / base;
@@ -16,8 +16,9 @@
  *
  * In other words, a 64-bit dividend with a 32-bit divisor producing
  * a 64-bit result and a 32-bit remainder.  To accomplish this optimally
- * we call a special __do_div64 helper with completely non standard
- * calling convention for arguments and results (beware).
+ * we override the generic version in lib/div64.c to call our __do_div64
+ * assembly implementation with completely non standard calling convention
+ * for arguments and results (beware).
  */
 
 #ifdef __ARMEB__
@@ -28,199 +29,101 @@
 #define __xh "r1"
 #endif
 
-#define __do_div_asm(n, base)					\
-({								\
-	register unsigned int __base      asm("r4") = base;	\
-	register unsigned long long __n   asm("r0") = n;	\
-	register unsigned long long __res asm("r2");		\
-	register unsigned int __rem       asm(__xh);		\
-	asm(	__asmeq("%0", __xh)				\
-		__asmeq("%1", "r2")				\
-		__asmeq("%2", "r0")				\
-		__asmeq("%3", "r4")				\
-		"bl	__do_div64"				\
-		: "=r" (__rem), "=r" (__res)			\
-		: "r" (__n), "r" (__base)			\
-		: "ip", "lr", "cc");				\
-	n = __res;						\
-	__rem;							\
-})
-
-#if __GNUC__ < 4 || !defined(CONFIG_AEABI)
+static inline uint32_t __div64_32(uint64_t *n, uint32_t base)
+{
+	register unsigned int __base      asm("r4") = base;
+	register unsigned long long __n   asm("r0") = *n;
+	register unsigned long long __res asm("r2");
+	register unsigned int __rem       asm(__xh);
+	asm(	__asmeq("%0", __xh)
+		__asmeq("%1", "r2")
+		__asmeq("%2", "r0")
+		__asmeq("%3", "r4")
+		"bl	__do_div64"
+		: "=r" (__rem), "=r" (__res)
+		: "r" (__n), "r" (__base)
+		: "ip", "lr", "cc");
+	*n = __res;
+	return __rem;
+}
+#define __div64_32 __div64_32
+
+#if !defined(CONFIG_AEABI)
 
 /*
- * gcc versions earlier than 4.0 are simply too problematic for the
- * optimized implementation below. First there is gcc PR 15089 that
- * tend to trig on more complex constructs, spurious .global __udivsi3
- * are inserted even if none of those symbols are referenced in the
- * generated code, and those gcc versions are not able to do constant
- * propagation on long long values anyway.
+ * In OABI configurations, some uses of the do_div function
+ * cause gcc to run out of registers. To work around that,
+ * we can force the use of the out-of-line version for
+ * configurations that build a OABI kernel.
  */
-#define do_div(n, base) __do_div_asm(n, base)
-
-#elif __GNUC__ >= 4
+#define do_div(n, base) __div64_32(&(n), base)
 
-#include <asm/bug.h>
+#else
 
 /*
- * If the divisor happens to be constant, we determine the appropriate
- * inverse at compile time to turn the division into a few inline
- * multiplications instead which is much faster. And yet only if compiling
- * for ARMv4 or higher (we need umull/umlal) and if the gcc version is
- * sufficiently recent to perform proper long long constant propagation.
- * (It is unfortunate that gcc doesn't perform all this internally.)
+ * gcc versions earlier than 4.0 are simply too problematic for the
+ * __div64_const32() code in asm-generic/div64.h. First there is
+ * gcc PR 15089 that tend to trig on more complex constructs, spurious
+ * .global __udivsi3 are inserted even if none of those symbols are
+ * referenced in the generated code, and those gcc versions are not able
+ * to do constant propagation on long long values anyway.
  */
-#define do_div(n, base)							\
-({									\
-	unsigned int __r, __b = (base);					\
-	if (!__builtin_constant_p(__b) || __b == 0 ||			\
-	    (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) {	\
-		/* non-constant divisor (or zero): slow path */		\
-		__r = __do_div_asm(n, __b);				\
-	} else if ((__b & (__b - 1)) == 0) {				\
-		/* Trivial: __b is constant and a power of 2 */		\
-		/* gcc does the right thing with this code.  */		\
-		__r = n;						\
-		__r &= (__b - 1);					\
-		n /= __b;						\
-	} else {							\
-		/* Multiply by inverse of __b: n/b = n*(p/b)/p       */	\
-		/* We rely on the fact that most of this code gets   */	\
-		/* optimized away at compile time due to constant    */	\
-		/* propagation and only a couple inline assembly     */	\
-		/* instructions should remain. Better avoid any      */	\
-		/* code construct that might prevent that.           */	\
-		unsigned long long __res, __x, __t, __m, __n = n;	\
-		unsigned int __c, __p, __z = 0;				\
-		/* preserve low part of n for reminder computation */	\
-		__r = __n;						\
-		/* determine number of bits to represent __b */		\
-		__p = 1 << __div64_fls(__b);				\
-		/* compute __m = ((__p << 64) + __b - 1) / __b */	\
-		__m = (~0ULL / __b) * __p;				\
-		__m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b;	\
-		/* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */	\
-		__x = ~0ULL / __b * __b - 1;				\
-		__res = (__m & 0xffffffff) * (__x & 0xffffffff);	\
-		__res >>= 32;						\
-		__res += (__m & 0xffffffff) * (__x >> 32);		\
-		__t = __res;						\
-		__res += (__x & 0xffffffff) * (__m >> 32);		\
-		__t = (__res < __t) ? (1ULL << 32) : 0;			\
-		__res = (__res >> 32) + __t;				\
-		__res += (__m >> 32) * (__x >> 32);			\
-		__res /= __p;						\
-		/* Now sanitize and optimize what we've got. */		\
-		if (~0ULL % (__b / (__b & -__b)) == 0) {		\
-			/* those cases can be simplified with: */	\
-			__n /= (__b & -__b);				\
-			__m = ~0ULL / (__b / (__b & -__b));		\
-			__p = 1;					\
-			__c = 1;					\
-		} else if (__res != __x / __b) {			\
-			/* We can't get away without a correction    */	\
-			/* to compensate for bit truncation errors.  */	\
-			/* To avoid it we'd need an additional bit   */	\
-			/* to represent __m which would overflow it. */	\
-			/* Instead we do m=p/b and n/b=(n*m+m)/p.    */	\
-			__c = 1;					\
-			/* Compute __m = (__p << 64) / __b */		\
-			__m = (~0ULL / __b) * __p;			\
-			__m += ((~0ULL % __b + 1) * __p) / __b;		\
-		} else {						\
-			/* Reduce __m/__p, and try to clear bit 31   */	\
-			/* of __m when possible otherwise that'll    */	\
-			/* need extra overflow handling later.       */	\
-			unsigned int __bits = -(__m & -__m);		\
-			__bits |= __m >> 32;				\
-			__bits = (~__bits) << 1;			\
-			/* If __bits == 0 then setting bit 31 is     */	\
-			/* unavoidable.  Simply apply the maximum    */	\
-			/* possible reduction in that case.          */	\
-			/* Otherwise the MSB of __bits indicates the */	\
-			/* best reduction we should apply.           */	\
-			if (!__bits) {					\
-				__p /= (__m & -__m);			\
-				__m /= (__m & -__m);			\
-			} else {					\
-				__p >>= __div64_fls(__bits);		\
-				__m >>= __div64_fls(__bits);		\
-			}						\
-			/* No correction needed. */			\
-			__c = 0;					\
-		}							\
-		/* Now we have a combination of 2 conditions:        */	\
-		/* 1) whether or not we need a correction (__c), and */	\
-		/* 2) whether or not there might be an overflow in   */	\
-		/*    the cross product (__m & ((1<<63) | (1<<31)))  */	\
-		/* Select the best insn combination to perform the   */	\
-		/* actual __m * __n / (__p << 64) operation.         */	\
-		if (!__c) {						\
-			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"mov	%Q0, #0"			\
-				: "=&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {	\
-			__res = __m;					\
-			asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"mov	%Q0, #0"			\
-				: "+&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else {						\
-			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"cmn	%Q0, %Q1\n\t"			\
-				"adcs	%R0, %R0, %R1\n\t"		\
-				"adc	%Q0, %3, #0"			\
-				: "=&r" (__res)				\
-				: "r" (__m), "r" (__n), "r" (__z)	\
-				: "cc" );				\
-		}							\
-		if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {		\
-			asm (	"umlal	%R0, %Q0, %R1, %Q2\n\t"		\
-				"umlal	%R0, %Q0, %Q1, %R2\n\t"		\
-				"mov	%R0, #0\n\t"			\
-				"umlal	%Q0, %R0, %R1, %R2"		\
-				: "+&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else {						\
-			asm (	"umlal	%R0, %Q0, %R2, %Q3\n\t"		\
-				"umlal	%R0, %1, %Q2, %R3\n\t"		\
-				"mov	%R0, #0\n\t"			\
-				"adds	%Q0, %1, %Q0\n\t"		\
-				"adc	%R0, %R0, #0\n\t"		\
-				"umlal	%Q0, %R0, %R2, %R3"		\
-				: "+&r" (__res), "+&r" (__z)		\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		}							\
-		__res /= __p;						\
-		/* The reminder can be computed with 32-bit regs     */	\
-		/* only, and gcc is good at that.                    */	\
-		{							\
-			unsigned int __res0 = __res;			\
-			unsigned int __b0 = __b;			\
-			__r -= __res0 * __b0;				\
-		}							\
-		/* BUG_ON(__r >= __b || __res * __b + __r != n); */	\
-		n = __res;						\
-	}								\
-	__r;								\
-})
-
-/* our own fls implementation to make sure constant propagation is fine */
-#define __div64_fls(bits)						\
-({									\
-	unsigned int __left = (bits), __nr = 0;				\
-	if (__left & 0xffff0000) __nr += 16, __left >>= 16;		\
-	if (__left & 0x0000ff00) __nr +=  8, __left >>=  8;		\
-	if (__left & 0x000000f0) __nr +=  4, __left >>=  4;		\
-	if (__left & 0x0000000c) __nr +=  2, __left >>=  2;		\
-	if (__left & 0x00000002) __nr +=  1;				\
-	__nr;								\
-})
+
+#define __div64_const32_is_OK (__GNUC__ >= 4)
+
+static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias)
+{
+	unsigned long long res;
+	register unsigned int tmp asm("ip") = 0;
+
+	if (!bias) {
+		asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"
+			"mov	%Q0, #0"
+			: "=&r" (res)
+			: "r" (m), "r" (n)
+			: "cc");
+	} else if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
+		res = m;
+		asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"
+			"mov	%Q0, #0"
+			: "+&r" (res)
+			: "r" (m), "r" (n)
+			: "cc");
+	} else {
+		asm (	"umull	%Q0, %R0, %Q2, %Q3\n\t"
+			"cmn	%Q0, %Q2\n\t"
+			"adcs	%R0, %R0, %R2\n\t"
+			"adc	%Q0, %1, #0"
+			: "=&r" (res), "+&r" (tmp)
+			: "r" (m), "r" (n)
+			: "cc");
+	}
+
+	if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
+		asm (	"umlal	%R0, %Q0, %R1, %Q2\n\t"
+			"umlal	%R0, %Q0, %Q1, %R2\n\t"
+			"mov	%R0, #0\n\t"
+			"umlal	%Q0, %R0, %R1, %R2"
+			: "+&r" (res)
+			: "r" (m), "r" (n)
+			: "cc");
+	} else {
+		asm (	"umlal	%R0, %Q0, %R2, %Q3\n\t"
+			"umlal	%R0, %1, %Q2, %R3\n\t"
+			"mov	%R0, #0\n\t"
+			"adds	%Q0, %1, %Q0\n\t"
+			"adc	%R0, %R0, #0\n\t"
+			"umlal	%Q0, %R0, %R2, %R3"
+			: "+&r" (res), "+&r" (tmp)
+			: "r" (m), "r" (n)
+			: "cc");
+	}
+
+	return res;
+}
+#define __arch_xprod_64 __arch_xprod_64
+
+#include <asm-generic/div64.h>
 
 #endif
 
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index b52101d37..bf02dbd9c 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -5,16 +5,14 @@
 
 #include <linux/mm_types.h>
 #include <linux/scatterlist.h>
-#include <linux/dma-attrs.h>
 #include <linux/dma-debug.h>
 
-#include <asm-generic/dma-coherent.h>
 #include <asm/memory.h>
 
 #include <xen/xen.h>
 #include <asm/xen/hypervisor.h>
 
-#define DMA_ERROR_CODE	(~0)
+#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
 extern struct dma_map_ops arm_dma_ops;
 extern struct dma_map_ops arm_coherent_dma_ops;
 
@@ -39,12 +37,8 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 	dev->archdata.dma_ops = ops;
 }
 
-#include <asm-generic/dma-mapping-common.h>
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-	return get_dma_ops(dev)->set_dma_mask(dev, mask);
-}
+#define HAVE_ARCH_DMA_SUPPORTED 1
+extern int dma_supported(struct device *dev, u64 mask);
 
 #ifdef __arch_page_to_dma
 #error Please update to __arch_pfn_to_dma
@@ -117,13 +111,13 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 /* The ARM override for dma_max_pfn() */
 static inline unsigned long dma_max_pfn(struct device *dev)
 {
-	return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask);
+	return dma_to_pfn(dev, *dev->dma_mask);
 }
 #define dma_max_pfn(dev) dma_max_pfn(dev)
 
 #define arch_setup_dma_ops arch_setup_dma_ops
 extern void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			       struct iommu_ops *iommu, bool coherent);
+			       const struct iommu_ops *iommu, bool coherent);
 
 #define arch_teardown_dma_ops arch_teardown_dma_ops
 extern void arch_teardown_dma_ops(struct device *dev);
@@ -167,34 +161,6 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 
 static inline void dma_mark_clean(void *addr, size_t size) { }
 
-/*
- * DMA errors are defined by all-bits-set in the DMA address.
- */
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	debug_dma_mapping_error(dev, dma_addr);
-	return dma_addr == DMA_ERROR_CODE;
-}
-
-/*
- * Dummy noncoherent implementation.  We don't provide a dma_cache_sync
- * function so drivers using this API are highlighted with build warnings.
- */
-static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
-		dma_addr_t *handle, gfp_t gfp)
-{
-	return NULL;
-}
-
-static inline void dma_free_noncoherent(struct device *dev, size_t size,
-		void *cpu_addr, dma_addr_t handle)
-{
-}
-
-extern int dma_supported(struct device *dev, u64 mask);
-
-extern int arm_dma_set_mask(struct device *dev, u64 dma_mask);
-
 /**
  * arm_dma_alloc - allocate consistent memory for DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
@@ -207,22 +173,7 @@ extern int arm_dma_set_mask(struct device *dev, u64 dma_mask);
  * to be the device-viewed address.
  */
 extern void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
-			   gfp_t gfp, struct dma_attrs *attrs);
-
-#define dma_alloc_coherent(d, s, h, f) dma_alloc_attrs(d, s, h, f, NULL)
-
-static inline void *dma_alloc_attrs(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag,
-				       struct dma_attrs *attrs)
-{
-	struct dma_map_ops *ops = get_dma_ops(dev);
-	void *cpu_addr;
-	BUG_ON(!ops);
-
-	cpu_addr = ops->alloc(dev, size, dma_handle, flag, attrs);
-	debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
-	return cpu_addr;
-}
+			   gfp_t gfp, unsigned long attrs);
 
 /**
  * arm_dma_free - free memory allocated by arm_dma_alloc
@@ -239,20 +190,7 @@ static inline void *dma_alloc_attrs(struct device *dev, size_t size,
  * during and after this call executing are illegal.
  */
 extern void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
-			 dma_addr_t handle, struct dma_attrs *attrs);
-
-#define dma_free_coherent(d, s, c, h) dma_free_attrs(d, s, c, h, NULL)
-
-static inline void dma_free_attrs(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_handle,
-				     struct dma_attrs *attrs)
-{
-	struct dma_map_ops *ops = get_dma_ops(dev);
-	BUG_ON(!ops);
-
-	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
-	ops->free(dev, size, cpu_addr, dma_handle, attrs);
-}
+			 dma_addr_t handle, unsigned long attrs);
 
 /**
  * arm_dma_mmap - map a coherent DMA allocation into user space
@@ -269,7 +207,7 @@ static inline void dma_free_attrs(struct device *dev, size_t size,
  */
 extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 			void *cpu_addr, dma_addr_t dma_addr, size_t size,
-			struct dma_attrs *attrs);
+			unsigned long attrs);
 
 /*
  * This can be called during early boot to increase the size of the atomic
@@ -323,16 +261,16 @@ extern void dmabounce_unregister_dev(struct device *);
  * The scatter list versions of the above methods.
  */
 extern int arm_dma_map_sg(struct device *, struct scatterlist *, int,
-		enum dma_data_direction, struct dma_attrs *attrs);
+		enum dma_data_direction, unsigned long attrs);
 extern void arm_dma_unmap_sg(struct device *, struct scatterlist *, int,
-		enum dma_data_direction, struct dma_attrs *attrs);
+		enum dma_data_direction, unsigned long attrs);
 extern void arm_dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
 		enum dma_data_direction);
 extern void arm_dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
 		enum dma_data_direction);
 extern int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
 		void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		struct dma_attrs *attrs);
+		unsigned long attrs);
 
 #endif /* __KERNEL__ */
 #endif
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index 6ddbe4464..99d9f630d 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -12,6 +12,7 @@
 
 #ifndef __ASSEMBLY__
 #include <asm/barrier.h>
+#include <asm/thread_info.h>
 #endif
 
 /*
@@ -34,15 +35,14 @@
  */
 #ifndef CONFIG_IO_36
 #define DOMAIN_KERNEL	0
-#define DOMAIN_TABLE	0
 #define DOMAIN_USER	1
 #define DOMAIN_IO	2
 #else
 #define DOMAIN_KERNEL	2
-#define DOMAIN_TABLE	2
 #define DOMAIN_USER	1
 #define DOMAIN_IO	0
 #endif
+#define DOMAIN_VECTORS	3
 
 /*
  * Domain types
@@ -55,30 +55,76 @@
 #define DOMAIN_MANAGER	1
 #endif
 
-#define domain_val(dom,type)	((type) << (2*(dom)))
+#define domain_mask(dom)	((3) << (2 * (dom)))
+#define domain_val(dom,type)	((type) << (2 * (dom)))
+
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+#define DACR_INIT \
+	(domain_val(DOMAIN_USER, DOMAIN_NOACCESS) | \
+	 domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
+	 domain_val(DOMAIN_IO, DOMAIN_CLIENT) | \
+	 domain_val(DOMAIN_VECTORS, DOMAIN_CLIENT))
+#else
+#define DACR_INIT \
+	(domain_val(DOMAIN_USER, DOMAIN_CLIENT) | \
+	 domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
+	 domain_val(DOMAIN_IO, DOMAIN_CLIENT) | \
+	 domain_val(DOMAIN_VECTORS, DOMAIN_CLIENT))
+#endif
+
+#define __DACR_DEFAULT \
+	domain_val(DOMAIN_KERNEL, DOMAIN_CLIENT) | \
+	domain_val(DOMAIN_IO, DOMAIN_CLIENT) | \
+	domain_val(DOMAIN_VECTORS, DOMAIN_CLIENT)
+
+#define DACR_UACCESS_DISABLE	\
+	(__DACR_DEFAULT | domain_val(DOMAIN_USER, DOMAIN_NOACCESS))
+#define DACR_UACCESS_ENABLE	\
+	(__DACR_DEFAULT | domain_val(DOMAIN_USER, DOMAIN_CLIENT))
 
 #ifndef __ASSEMBLY__
 
-#ifdef CONFIG_CPU_USE_DOMAINS
+#ifdef CONFIG_CPU_CP15_MMU
+static inline unsigned int get_domain(void)
+{
+	unsigned int domain;
+
+	asm(
+	"mrc	p15, 0, %0, c3, c0	@ get domain"
+	 : "=r" (domain)
+	 : "m" (current_thread_info()->cpu_domain));
+
+	return domain;
+}
+
 static inline void set_domain(unsigned val)
 {
 	asm volatile(
 	"mcr	p15, 0, %0, c3, c0	@ set domain"
-	  : : "r" (val));
+	  : : "r" (val) : "memory");
 	isb();
 }
+#else
+static inline unsigned int get_domain(void)
+{
+	return 0;
+}
+
+static inline void set_domain(unsigned val)
+{
+}
+#endif
 
+#ifdef CONFIG_CPU_USE_DOMAINS
 #define modify_domain(dom,type)					\
 	do {							\
-	struct thread_info *thread = current_thread_info();	\
-	unsigned int domain = thread->cpu_domain;		\
-	domain &= ~domain_val(dom, DOMAIN_MANAGER);		\
-	thread->cpu_domain = domain | domain_val(dom, type);	\
-	set_domain(thread->cpu_domain);				\
+		unsigned int domain = get_domain();		\
+		domain &= ~domain_mask(dom);			\
+		domain = domain | domain_val(dom, type);	\
+		set_domain(domain);				\
 	} while (0)
 
 #else
-static inline void set_domain(unsigned val) { }
 static inline void modify_domain(unsigned dom, unsigned type)	{ }
 #endif
 
diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
new file mode 100644
index 000000000..766bf9b78
--- /dev/null
+++ b/arch/arm/include/asm/efi.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_EFI_H
+#define __ASM_ARM_EFI_H
+
+#include <asm/cacheflush.h>
+#include <asm/cachetype.h>
+#include <asm/early_ioremap.h>
+#include <asm/fixmap.h>
+#include <asm/highmem.h>
+#include <asm/mach/map.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_EFI
+void efi_init(void);
+
+int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
+int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
+
+#define arch_efi_call_virt_setup()	efi_virtmap_load()
+#define arch_efi_call_virt_teardown()	efi_virtmap_unload()
+
+#define arch_efi_call_virt(p, f, args...)				\
+({									\
+	efi_##f##_t *__f;						\
+	__f = p->f;							\
+	__f(args);							\
+})
+
+#define ARCH_EFI_IRQ_FLAGS_MASK \
+	(PSR_J_BIT | PSR_E_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT | \
+	 PSR_T_BIT | MODE_MASK)
+
+static inline void efi_set_pgd(struct mm_struct *mm)
+{
+	check_and_switch_context(mm, NULL);
+}
+
+void efi_virtmap_load(void);
+void efi_virtmap_unload(void);
+
+#else
+#define efi_init()
+#endif /* CONFIG_EFI */
+
+/* arch specific definitions used by the stub code */
+
+#define efi_call_early(f, ...)		sys_table_arg->boottime->f(__VA_ARGS__)
+#define __efi_call_early(f, ...)	f(__VA_ARGS__)
+#define efi_is_64bit()			(false)
+
+struct screen_info *alloc_screen_info(efi_system_table_t *sys_table_arg);
+void free_screen_info(efi_system_table_t *sys_table, struct screen_info *si);
+
+static inline void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
+{
+}
+
+/*
+ * A reasonable upper bound for the uncompressed kernel size is 32 MBytes,
+ * so we will reserve that amount of memory. We have no easy way to tell what
+ * the actuall size of code + data the uncompressed kernel will use.
+ * If this is insufficient, the decompressor will relocate itself out of the
+ * way before performing the decompression.
+ */
+#define MAX_UNCOMP_KERNEL_SIZE	SZ_32M
+
+/*
+ * The kernel zImage should preferably be located between 32 MB and 128 MB
+ * from the base of DRAM. The min address leaves space for a maximal size
+ * uncompressed image, and the max address is due to how the zImage decompressor
+ * picks a destination address.
+ */
+#define ZIMAGE_OFFSET_LIMIT	SZ_128M
+#define MIN_ZIMAGE_OFFSET	MAX_UNCOMP_KERNEL_SIZE
+#define MAX_FDT_OFFSET		ZIMAGE_OFFSET_LIMIT
+
+#endif /* _ASM_ARM_EFI_H */
diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h
index 5abaf5bbd..bf1991263 100644
--- a/arch/arm/include/asm/exception.h
+++ b/arch/arm/include/asm/exception.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_ARM_EXCEPTION_H
 #define __ASM_ARM_EXCEPTION_H
 
-#include <linux/ftrace.h>
+#include <linux/interrupt.h>
 
 #define __exception	__attribute__((section(".exception.text")))
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h
index 0415eae1d..5c17d2dec 100644
--- a/arch/arm/include/asm/fixmap.h
+++ b/arch/arm/include/asm/fixmap.h
@@ -6,20 +6,60 @@
 #define FIXADDR_TOP		(FIXADDR_END - PAGE_SIZE)
 
 #include <asm/kmap_types.h>
+#include <asm/pgtable.h>
 
 enum fixed_addresses {
-	FIX_KMAP_BEGIN,
+	FIX_EARLYCON_MEM_BASE,
+	__end_of_permanent_fixed_addresses,
+
+	FIX_KMAP_BEGIN = __end_of_permanent_fixed_addresses,
 	FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_TYPE_NR * NR_CPUS) - 1,
 
 	/* Support writing RO kernel text via kprobes, jump labels, etc. */
 	FIX_TEXT_POKE0,
 	FIX_TEXT_POKE1,
 
-	__end_of_fixed_addresses
+	__end_of_fixmap_region,
+
+	/*
+	 * Share the kmap() region with early_ioremap(): this is guaranteed
+	 * not to clash since early_ioremap() is only available before
+	 * paging_init(), and kmap() only after.
+	 */
+#define NR_FIX_BTMAPS		32
+#define FIX_BTMAPS_SLOTS	7
+#define TOTAL_FIX_BTMAPS	(NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS)
+
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses,
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1,
+	__end_of_early_ioremap_region
 };
 
+static const enum fixed_addresses __end_of_fixed_addresses =
+	__end_of_fixmap_region > __end_of_early_ioremap_region ?
+	__end_of_fixmap_region : __end_of_early_ioremap_region;
+
+#define FIXMAP_PAGE_COMMON	(L_PTE_YOUNG | L_PTE_PRESENT | L_PTE_XN | L_PTE_DIRTY)
+
+#define FIXMAP_PAGE_NORMAL	(FIXMAP_PAGE_COMMON | L_PTE_MT_WRITEBACK)
+#define FIXMAP_PAGE_RO		(FIXMAP_PAGE_NORMAL | L_PTE_RDONLY)
+
+/* Used by set_fixmap_(io|nocache), both meant for mapping a device */
+#define FIXMAP_PAGE_IO		(FIXMAP_PAGE_COMMON | L_PTE_MT_DEV_SHARED | L_PTE_SHARED)
+#define FIXMAP_PAGE_NOCACHE	FIXMAP_PAGE_IO
+
+#define __early_set_fixmap	__set_fixmap
+
+#ifdef CONFIG_MMU
+
 void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot);
+void __init early_fixmap_init(void);
 
 #include <asm-generic/fixmap.h>
 
+#else
+
+static inline void early_fixmap_init(void) { }
+
+#endif
 #endif
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
index f4882553f..85a34cc83 100644
--- a/arch/arm/include/asm/floppy.h
+++ b/arch/arm/include/asm/floppy.h
@@ -17,7 +17,7 @@
 
 #define fd_outb(val,port)			\
 	do {					\
-		if ((port) == FD_DOR)		\
+		if ((port) == (u32)FD_DOR)	\
 			fd_setdor((val));	\
 		else				\
 			outb((val),(port));	\
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 5eed82809..6795368ad 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -22,8 +22,11 @@
 #ifdef CONFIG_SMP
 
 #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
+({								\
+	unsigned int __ua_flags;				\
 	smp_mb();						\
 	prefetchw(uaddr);					\
+	__ua_flags = uaccess_save_and_enable();			\
 	__asm__ __volatile__(					\
 	"1:	ldrex	%1, [%3]\n"				\
 	"	" insn "\n"					\
@@ -34,12 +37,15 @@
 	__futex_atomic_ex_table("%5")				\
 	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
-	: "cc", "memory")
+	: "cc", "memory");					\
+	uaccess_restore(__ua_flags);				\
+})
 
 static inline int
 futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 			      u32 oldval, u32 newval)
 {
+	unsigned int __ua_flags;
 	int ret;
 	u32 val;
 
@@ -49,6 +55,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	smp_mb();
 	/* Prefetching cannot fault */
 	prefetchw(uaddr);
+	__ua_flags = uaccess_save_and_enable();
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
 	"1:	ldrex	%1, [%4]\n"
 	"	teq	%1, %2\n"
@@ -61,6 +68,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	: "=&r" (ret), "=&r" (val)
 	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
 	: "cc", "memory");
+	uaccess_restore(__ua_flags);
 	smp_mb();
 
 	*uval = val;
@@ -73,6 +81,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 #include <asm/domain.h>
 
 #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
+({								\
+	unsigned int __ua_flags = uaccess_save_and_enable();	\
 	__asm__ __volatile__(					\
 	"1:	" TUSER(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
@@ -81,12 +91,15 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	__futex_atomic_ex_table("%5")				\
 	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
-	: "cc", "memory")
+	: "cc", "memory");					\
+	uaccess_restore(__ua_flags);				\
+})
 
 static inline int
 futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 			      u32 oldval, u32 newval)
 {
+	unsigned int __ua_flags;
 	int ret = 0;
 	u32 val;
 
@@ -94,6 +107,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
 	preempt_disable();
+	__ua_flags = uaccess_save_and_enable();
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
 	"1:	" TUSER(ldr) "	%1, [%4]\n"
 	"	teq	%1, %2\n"
@@ -103,6 +117,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	: "+r" (ret), "=&r" (val)
 	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
 	: "cc", "memory");
+	uaccess_restore(__ua_flags);
 
 	*uval = val;
 	preempt_enable();
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
index a3c24cd5b..cab07f693 100644
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -158,8 +158,6 @@ static inline void nop_dma_unmap_area(const void *s, size_t l, int f) { }
 #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
 #define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
 
-#define dmac_map_area			__glue(_CACHE,_dma_map_area)
-#define dmac_unmap_area			__glue(_CACHE,_dma_unmap_area)
 #define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
 #endif
 
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index fe3ea776d..3d7351c84 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -5,7 +5,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
-#define NR_IPI	8
+#define NR_IPI	7
 
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/arm/include/asm/hardware/cache-uniphier.h b/arch/arm/include/asm/hardware/cache-uniphier.h
new file mode 100644
index 000000000..102e3fbe1
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-uniphier.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CACHE_UNIPHIER_H
+#define __CACHE_UNIPHIER_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_CACHE_UNIPHIER
+int uniphier_cache_init(void);
+int uniphier_cache_l2_is_enabled(void);
+void uniphier_cache_l2_touch_range(unsigned long start, unsigned long end);
+void uniphier_cache_l2_set_locked_ways(u32 way_mask);
+#else
+static inline int uniphier_cache_init(void)
+{
+	return -ENODEV;
+}
+
+static inline int uniphier_cache_l2_is_enabled(void)
+{
+	return 0;
+}
+
+static inline void uniphier_cache_l2_touch_range(unsigned long start,
+						 unsigned long end)
+{
+}
+
+static inline void uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+}
+#endif
+
+#endif /* __CACHE_UNIPHIER_H */
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index d36a73d7c..076777ff3 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -106,7 +106,7 @@ extern void __iomem *it8152_base_address;
 struct pci_dev;
 struct pci_sys_data;
 
-extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
+extern void it8152_irq_demux(struct irq_desc *desc);
 extern void it8152_init_irq(void);
 extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
 extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 535579511..0a0e2d178 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -68,7 +68,6 @@ extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
-extern struct page *kmap_atomic_to_page(const void *ptr);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h
index af79da40a..9beb92914 100644
--- a/arch/arm/include/asm/hw_irq.h
+++ b/arch/arm/include/asm/hw_irq.h
@@ -11,12 +11,6 @@ static inline void ack_bad_irq(int irq)
 	pr_crit("unexpected IRQ trap at vector %02x\n", irq);
 }
 
-void set_irq_flags(unsigned int irq, unsigned int flags);
-
-#define IRQF_VALID	(1 << 0)
-#define IRQF_PROBE	(1 << 1)
-#define IRQF_NOAUTOEN	(1 << 2)
-
 #define ARCH_IRQ_INIT_FLAGS	(IRQ_NOREQUEST | IRQ_NOPROBE)
 
 #endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 485982084..021692c64 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -282,7 +282,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
  * These perform PCI memory accesses via an ioremap region.  They don't
  * take an address as such, but a cookie.
  *
- * Again, this are defined to perform little endian accesses.  See the
+ * Again, these are defined to perform little endian accesses.  See the
  * IO port primitives for more information.
  */
 #ifndef readl
@@ -392,9 +392,18 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size);
 #define ioremap ioremap
 #define ioremap_nocache ioremap
 
+/*
+ * Do not use ioremap_cache for mapping memory. Use memremap instead.
+ */
 void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size);
 #define ioremap_cache ioremap_cache
 
+/*
+ * Do not use ioremap_cached in new code. Provided for the benefit of
+ * the pxa2xx-flash MTD driver only.
+ */
+void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size);
+
 void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
 #define ioremap_wc ioremap_wc
 #define ioremap_wt ioremap_wc
@@ -402,6 +411,9 @@ void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
 void iounmap(volatile void __iomem *iomem_cookie);
 #define iounmap iounmap
 
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size);
+#define arch_memremap_wb arch_memremap_wb
+
 /*
  * io{read,write}{16,32}be() macros
  */
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 53c15dec7..1bd9510de 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -35,6 +35,16 @@ extern void (*handle_arch_irq)(struct pt_regs *);
 extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 #endif
 
+#ifdef CONFIG_SMP
+extern void arch_trigger_all_cpu_backtrace(bool);
+#define arch_trigger_all_cpu_backtrace(x) arch_trigger_all_cpu_backtrace(x)
+#endif
+
+static inline int nr_legacy_irqs(void)
+{
+	return NR_IRQS_LEGACY;
+}
+
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h
index 43908146a..e6b70d9d0 100644
--- a/arch/arm/include/asm/irqflags.h
+++ b/arch/arm/include/asm/irqflags.h
@@ -54,6 +54,14 @@ static inline void arch_local_irq_disable(void)
 
 #define local_fiq_enable()  __asm__("cpsie f	@ __stf" : : : "memory", "cc")
 #define local_fiq_disable() __asm__("cpsid f	@ __clf" : : : "memory", "cc")
+
+#ifndef CONFIG_CPU_V7M
+#define local_abt_enable()  __asm__("cpsie a	@ __sta" : : : "memory", "cc")
+#define local_abt_disable() __asm__("cpsid a	@ __cla" : : : "memory", "cc")
+#else
+#define local_abt_enable()	do { } while (0)
+#define local_abt_disable()	do { } while (0)
+#endif
 #else
 
 /*
@@ -136,6 +144,8 @@ static inline void arch_local_irq_disable(void)
 	: "memory", "cc");					\
 	})
 
+#define local_abt_enable()	do { } while (0)
+#define local_abt_disable()	do { } while (0)
 #endif
 
 /*
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
index 5f337dc5c..34f7b6980 100644
--- a/arch/arm/include/asm/jump_label.h
+++ b/arch/arm/include/asm/jump_label.h
@@ -4,23 +4,32 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
+#include <asm/unified.h>
 
 #define JUMP_LABEL_NOP_SIZE 4
 
-#ifdef CONFIG_THUMB2_KERNEL
-#define JUMP_LABEL_NOP	"nop.w"
-#else
-#define JUMP_LABEL_NOP	"nop"
-#endif
+static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
+{
+	asm_volatile_goto("1:\n\t"
+		 WASM(nop) "\n\t"
+		 ".pushsection __jump_table,  \"aw\"\n\t"
+		 ".word 1b, %l[l_yes], %c0\n\t"
+		 ".popsection\n\t"
+		 : :  "i" (&((char *)key)[branch]) :  : l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
 
-static __always_inline bool arch_static_branch(struct static_key *key)
+static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
 	asm_volatile_goto("1:\n\t"
-		 JUMP_LABEL_NOP "\n\t"
+		 WASM(b) " %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
 		 ".popsection\n\t"
-		 : :  "i" (key) :  : l_yes);
+		 : :  "i" (&((char *)key)[branch]) :  : l_yes);
 
 	return false;
 l_yes:
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index c2b9b4bde..1869af6ba 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -53,6 +53,30 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 /* Function pointer to optional machine-specific reinitialization */
 extern void (*kexec_reinit)(void);
 
+static inline unsigned long phys_to_boot_phys(phys_addr_t phys)
+{
+	return phys_to_idmap(phys);
+}
+#define phys_to_boot_phys phys_to_boot_phys
+
+static inline phys_addr_t boot_phys_to_phys(unsigned long entry)
+{
+	return idmap_to_phys(entry);
+}
+#define boot_phys_to_phys boot_phys_to_phys
+
+static inline unsigned long page_to_boot_pfn(struct page *page)
+{
+	return page_to_pfn(page) + (arch_phys_to_idmap_offset >> PAGE_SHIFT);
+}
+#define page_to_boot_pfn page_to_boot_pfn
+
+static inline struct page *boot_pfn_to_page(unsigned long boot_pfn)
+{
+	return pfn_to_page(boot_pfn - (arch_phys_to_idmap_offset >> PAGE_SHIFT));
+}
+#define boot_pfn_to_page boot_pfn_to_page
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* CONFIG_KEXEC */
diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h
index d995821f1..e22089fb4 100644
--- a/arch/arm/include/asm/kvm_arm.h
+++ b/arch/arm/include/asm/kvm_arm.h
@@ -19,6 +19,7 @@
 #ifndef __ARM_KVM_ARM_H__
 #define __ARM_KVM_ARM_H__
 
+#include <linux/const.h>
 #include <linux/types.h>
 
 /* Hyp Configuration Register (HCR) bits */
@@ -132,10 +133,9 @@
  * space.
  */
 #define KVM_PHYS_SHIFT	(40)
-#define KVM_PHYS_SIZE	(1ULL << KVM_PHYS_SHIFT)
-#define KVM_PHYS_MASK	(KVM_PHYS_SIZE - 1ULL)
-#define PTRS_PER_S2_PGD	(1ULL << (KVM_PHYS_SHIFT - 30))
-#define S2_PGD_ORDER	get_order(PTRS_PER_S2_PGD * sizeof(pgd_t))
+#define KVM_PHYS_SIZE	(_AC(1, ULL) << KVM_PHYS_SHIFT)
+#define KVM_PHYS_MASK	(KVM_PHYS_SIZE - _AC(1, ULL))
+#define PTRS_PER_S2_PGD	(_AC(1, ULL) << (KVM_PHYS_SHIFT - 30))
 
 /* Virtualization Translation Control Register (VTCR) bits */
 #define VTCR_SH0	(3 << 12)
@@ -162,17 +162,17 @@
 #define VTTBR_X		(5 - KVM_T0SZ)
 #endif
 #define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
-#define VTTBR_BADDR_MASK  (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
-#define VTTBR_VMID_SHIFT  (48LLU)
-#define VTTBR_VMID_MASK	  (0xffLLU << VTTBR_VMID_SHIFT)
+#define VTTBR_BADDR_MASK  (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
+#define VTTBR_VMID_SHIFT  _AC(48, ULL)
+#define VTTBR_VMID_MASK(size)	(_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT)
 
 /* Hyp Syndrome Register (HSR) bits */
 #define HSR_EC_SHIFT	(26)
-#define HSR_EC		(0x3fU << HSR_EC_SHIFT)
-#define HSR_IL		(1U << 25)
+#define HSR_EC		(_AC(0x3f, UL) << HSR_EC_SHIFT)
+#define HSR_IL		(_AC(1, UL) << 25)
 #define HSR_ISS		(HSR_IL - 1)
 #define HSR_ISV_SHIFT	(24)
-#define HSR_ISV		(1U << HSR_ISV_SHIFT)
+#define HSR_ISV		(_AC(1, UL) << HSR_ISV_SHIFT)
 #define HSR_SRT_SHIFT	(16)
 #define HSR_SRT_MASK	(0xf << HSR_SRT_SHIFT)
 #define HSR_FSC		(0x3f)
@@ -180,9 +180,9 @@
 #define HSR_SSE		(1 << 21)
 #define HSR_WNR		(1 << 6)
 #define HSR_CV_SHIFT	(24)
-#define HSR_CV		(1U << HSR_CV_SHIFT)
+#define HSR_CV		(_AC(1, UL) << HSR_CV_SHIFT)
 #define HSR_COND_SHIFT	(20)
-#define HSR_COND	(0xfU << HSR_COND_SHIFT)
+#define HSR_COND	(_AC(0xf, UL) << HSR_COND_SHIFT)
 
 #define FSC_FAULT	(0x04)
 #define FSC_ACCESS	(0x08)
@@ -210,12 +210,32 @@
 #define HSR_EC_DABT	(0x24)
 #define HSR_EC_DABT_HYP	(0x25)
 
-#define HSR_WFI_IS_WFE		(1U << 0)
+#define HSR_WFI_IS_WFE		(_AC(1, UL) << 0)
 
-#define HSR_HVC_IMM_MASK	((1UL << 16) - 1)
+#define HSR_HVC_IMM_MASK	((_AC(1, UL) << 16) - 1)
+
+#define HSR_DABT_S1PTW		(_AC(1, UL) << 7)
+#define HSR_DABT_CM		(_AC(1, UL) << 8)
+#define HSR_DABT_EA		(_AC(1, UL) << 9)
+
+#define kvm_arm_exception_type	\
+	{0, "RESET" }, 		\
+	{1, "UNDEFINED" },	\
+	{2, "SOFTWARE" },	\
+	{3, "PREF_ABORT" },	\
+	{4, "DATA_ABORT" },	\
+	{5, "IRQ" },		\
+	{6, "FIQ" },		\
+	{7, "HVC" }
+
+#define HSRECN(x) { HSR_EC_##x, #x }
+
+#define kvm_arm_exception_class \
+	HSRECN(UNKNOWN), HSRECN(WFI), HSRECN(CP15_32), HSRECN(CP15_64), \
+	HSRECN(CP14_MR), HSRECN(CP14_LS), HSRECN(CP_0_13), HSRECN(CP10_ID), \
+	HSRECN(JAZELLE), HSRECN(BXJ), HSRECN(CP14_64), HSRECN(SVC_HYP), \
+	HSRECN(HVC), HSRECN(SMC), HSRECN(IABT), HSRECN(IABT_HYP), \
+	HSRECN(DABT), HSRECN(DABT_HYP)
 
-#define HSR_DABT_S1PTW		(1U << 7)
-#define HSR_DABT_CM		(1U << 8)
-#define HSR_DABT_EA		(1U << 9)
 
 #endif /* __ARM_KVM_ARM_H__ */
diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h
index 194c91b61..58faff5f1 100644
--- a/arch/arm/include/asm/kvm_asm.h
+++ b/arch/arm/include/asm/kvm_asm.h
@@ -19,38 +19,7 @@
 #ifndef __ARM_KVM_ASM_H__
 #define __ARM_KVM_ASM_H__
 
-/* 0 is reserved as an invalid value. */
-#define c0_MPIDR	1	/* MultiProcessor ID Register */
-#define c0_CSSELR	2	/* Cache Size Selection Register */
-#define c1_SCTLR	3	/* System Control Register */
-#define c1_ACTLR	4	/* Auxiliary Control Register */
-#define c1_CPACR	5	/* Coprocessor Access Control */
-#define c2_TTBR0	6	/* Translation Table Base Register 0 */
-#define c2_TTBR0_high	7	/* TTBR0 top 32 bits */
-#define c2_TTBR1	8	/* Translation Table Base Register 1 */
-#define c2_TTBR1_high	9	/* TTBR1 top 32 bits */
-#define c2_TTBCR	10	/* Translation Table Base Control R. */
-#define c3_DACR		11	/* Domain Access Control Register */
-#define c5_DFSR		12	/* Data Fault Status Register */
-#define c5_IFSR		13	/* Instruction Fault Status Register */
-#define c5_ADFSR	14	/* Auxilary Data Fault Status R */
-#define c5_AIFSR	15	/* Auxilary Instrunction Fault Status R */
-#define c6_DFAR		16	/* Data Fault Address Register */
-#define c6_IFAR		17	/* Instruction Fault Address Register */
-#define c7_PAR		18	/* Physical Address Register */
-#define c7_PAR_high	19	/* PAR top 32 bits */
-#define c9_L2CTLR	20	/* Cortex A15/A7 L2 Control Register */
-#define c10_PRRR	21	/* Primary Region Remap Register */
-#define c10_NMRR	22	/* Normal Memory Remap Register */
-#define c12_VBAR	23	/* Vector Base Address Register */
-#define c13_CID		24	/* Context ID Register */
-#define c13_TID_URW	25	/* Thread ID, User R/W */
-#define c13_TID_URO	26	/* Thread ID, User R/O */
-#define c13_TID_PRIV	27	/* Thread ID, Privileged */
-#define c14_CNTKCTL	28	/* Timer Control Register (PL1) */
-#define c10_AMAIR0	29	/* Auxilary Memory Attribute Indirection Reg0 */
-#define c10_AMAIR1	30	/* Auxilary Memory Attribute Indirection Reg1 */
-#define NR_CP15_REGS	31	/* Number of regs (incl. invalid) */
+#include <asm/virt.h>
 
 #define ARM_EXCEPTION_RESET	  0
 #define ARM_EXCEPTION_UNDEFINED   1
@@ -79,6 +48,8 @@
 #define rr_lo_hi(a1, a2) a1, a2
 #endif
 
+#define kvm_ksym_ref(kva)	(kva)
+
 #ifndef __ASSEMBLY__
 struct kvm;
 struct kvm_vcpu;
@@ -86,19 +57,17 @@ struct kvm_vcpu;
 extern char __kvm_hyp_init[];
 extern char __kvm_hyp_init_end[];
 
-extern char __kvm_hyp_exit[];
-extern char __kvm_hyp_exit_end[];
-
 extern char __kvm_hyp_vector[];
 
-extern char __kvm_hyp_code_start[];
-extern char __kvm_hyp_code_end[];
-
 extern void __kvm_flush_vm_context(void);
 extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
 extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
 
 extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
+
+extern void __init_stage2_translation(void);
+
+extern void __kvm_hyp_reset(unsigned long);
 #endif
 
 #endif /* __ARM_KVM_ASM_H__ */
diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
index a9c80a2ea..ee5328fc4 100644
--- a/arch/arm/include/asm/kvm_emulate.h
+++ b/arch/arm/include/asm/kvm_emulate.h
@@ -28,6 +28,18 @@
 unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num);
 unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu);
 
+static inline unsigned long vcpu_get_reg(struct kvm_vcpu *vcpu,
+					 u8 reg_num)
+{
+	return *vcpu_reg(vcpu, reg_num);
+}
+
+static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num,
+				unsigned long val)
+{
+	*vcpu_reg(vcpu, reg_num) = val;
+}
+
 bool kvm_condition_valid(struct kvm_vcpu *vcpu);
 void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr);
 void kvm_inject_undefined(struct kvm_vcpu *vcpu);
@@ -56,12 +68,12 @@ static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu)
 
 static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu)
 {
-	return &vcpu->arch.regs.usr_regs.ARM_pc;
+	return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_pc;
 }
 
 static inline unsigned long *vcpu_cpsr(struct kvm_vcpu *vcpu)
 {
-	return &vcpu->arch.regs.usr_regs.ARM_cpsr;
+	return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr;
 }
 
 static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
@@ -71,13 +83,13 @@ static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
 
 static inline bool mode_has_spsr(struct kvm_vcpu *vcpu)
 {
-	unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK;
+	unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK;
 	return (cpsr_mode > USR_MODE && cpsr_mode < SYSTEM_MODE);
 }
 
 static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu)
 {
-	unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK;
+	unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK;
 	return cpsr_mode > USR_MODE;;
 }
 
@@ -96,11 +108,6 @@ static inline phys_addr_t kvm_vcpu_get_fault_ipa(struct kvm_vcpu *vcpu)
 	return ((phys_addr_t)vcpu->arch.fault.hpfar & HPFAR_MASK) << 8;
 }
 
-static inline unsigned long kvm_vcpu_get_hyp_pc(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.fault.hyp_pc;
-}
-
 static inline bool kvm_vcpu_dabt_isvalid(struct kvm_vcpu *vcpu)
 {
 	return kvm_vcpu_get_hsr(vcpu) & HSR_ISV;
@@ -131,6 +138,11 @@ static inline bool kvm_vcpu_dabt_iss1tw(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_S1PTW;
 }
 
+static inline bool kvm_vcpu_dabt_is_cm(struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_hsr(vcpu) & HSR_DABT_CM);
+}
+
 /* Get Access Size from a data abort */
 static inline int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu)
 {
@@ -180,7 +192,7 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu)
 
 static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.cp15[c0_MPIDR] & MPIDR_HWID_BITMASK;
+	return vcpu_cp15(vcpu, c0_MPIDR) & MPIDR_HWID_BITMASK;
 }
 
 static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index e896d2c19..de338d93d 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -29,21 +29,20 @@
 
 #define __KVM_HAVE_ARCH_INTC_INITIALIZED
 
-#if defined(CONFIG_KVM_ARM_MAX_VCPUS)
-#define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS
-#else
-#define KVM_MAX_VCPUS 0
-#endif
-
 #define KVM_USER_MEM_SLOTS 32
 #define KVM_PRIVATE_MEM_SLOTS 4
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 #define KVM_HAVE_ONE_REG
+#define KVM_HALT_POLL_NS_DEFAULT 500000
 
 #define KVM_VCPU_MAX_FEATURES 2
 
 #include <kvm/arm_vgic.h>
 
+#define KVM_MAX_VCPUS VGIC_V2_MAX_CPUS
+
+#define KVM_REQ_VCPU_EXIT	8
+
 u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode);
 int __attribute_const__ kvm_target_cpu(void);
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
@@ -88,20 +87,61 @@ struct kvm_vcpu_fault_info {
 	u32 hsr;		/* Hyp Syndrome Register */
 	u32 hxfar;		/* Hyp Data/Inst. Fault Address Register */
 	u32 hpfar;		/* Hyp IPA Fault Address Register */
-	u32 hyp_pc;		/* PC when exception was taken from Hyp mode */
 };
 
-typedef struct vfp_hard_struct kvm_cpu_context_t;
+/*
+ * 0 is reserved as an invalid value.
+ * Order should be kept in sync with the save/restore code.
+ */
+enum vcpu_sysreg {
+	__INVALID_SYSREG__,
+	c0_MPIDR,		/* MultiProcessor ID Register */
+	c0_CSSELR,		/* Cache Size Selection Register */
+	c1_SCTLR,		/* System Control Register */
+	c1_ACTLR,		/* Auxiliary Control Register */
+	c1_CPACR,		/* Coprocessor Access Control */
+	c2_TTBR0,		/* Translation Table Base Register 0 */
+	c2_TTBR0_high,		/* TTBR0 top 32 bits */
+	c2_TTBR1,		/* Translation Table Base Register 1 */
+	c2_TTBR1_high,		/* TTBR1 top 32 bits */
+	c2_TTBCR,		/* Translation Table Base Control R. */
+	c3_DACR,		/* Domain Access Control Register */
+	c5_DFSR,		/* Data Fault Status Register */
+	c5_IFSR,		/* Instruction Fault Status Register */
+	c5_ADFSR,		/* Auxilary Data Fault Status R */
+	c5_AIFSR,		/* Auxilary Instrunction Fault Status R */
+	c6_DFAR,		/* Data Fault Address Register */
+	c6_IFAR,		/* Instruction Fault Address Register */
+	c7_PAR,			/* Physical Address Register */
+	c7_PAR_high,		/* PAR top 32 bits */
+	c9_L2CTLR,		/* Cortex A15/A7 L2 Control Register */
+	c10_PRRR,		/* Primary Region Remap Register */
+	c10_NMRR,		/* Normal Memory Remap Register */
+	c12_VBAR,		/* Vector Base Address Register */
+	c13_CID,		/* Context ID Register */
+	c13_TID_URW,		/* Thread ID, User R/W */
+	c13_TID_URO,		/* Thread ID, User R/O */
+	c13_TID_PRIV,		/* Thread ID, Privileged */
+	c14_CNTKCTL,		/* Timer Control Register (PL1) */
+	c10_AMAIR0,		/* Auxilary Memory Attribute Indirection Reg0 */
+	c10_AMAIR1,		/* Auxilary Memory Attribute Indirection Reg1 */
+	NR_CP15_REGS		/* Number of regs (incl. invalid) */
+};
+
+struct kvm_cpu_context {
+	struct kvm_regs	gp_regs;
+	struct vfp_hard_struct vfp;
+	u32 cp15[NR_CP15_REGS];
+};
+
+typedef struct kvm_cpu_context kvm_cpu_context_t;
 
 struct kvm_vcpu_arch {
-	struct kvm_regs regs;
+	struct kvm_cpu_context ctxt;
 
 	int target; /* Processor target */
 	DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES);
 
-	/* System control coprocessor (cp15) */
-	u32 cp15[NR_CP15_REGS];
-
 	/* The CPU type we expose to the VM */
 	u32 midr;
 
@@ -114,9 +154,6 @@ struct kvm_vcpu_arch {
 	/* Exception Information */
 	struct kvm_vcpu_fault_info fault;
 
-	/* Floating point registers (VFP and Advanced SIMD/NEON) */
-	struct vfp_hard_struct vfp_guest;
-
 	/* Host FP context */
 	kvm_cpu_context_t *host_cpu_context;
 
@@ -129,7 +166,10 @@ struct kvm_vcpu_arch {
 	 * here.
 	 */
 
-	/* Don't run the guest on this vcpu */
+	/* vcpu power-off state */
+	bool power_off;
+
+	 /* Don't run the guest (internal implementation need) */
 	bool pause;
 
 	/* IO related fields */
@@ -148,15 +188,25 @@ struct kvm_vm_stat {
 
 struct kvm_vcpu_stat {
 	u32 halt_successful_poll;
+	u32 halt_attempted_poll;
+	u32 halt_poll_invalid;
 	u32 halt_wakeup;
+	u32 hvc_exit_stat;
+	u64 wfe_exit_stat;
+	u64 wfi_exit_stat;
+	u64 mmio_exit_user;
+	u64 mmio_exit_kernel;
+	u64 exits;
 };
 
+#define vcpu_cp15(v,r)	(v)->arch.ctxt.cp15[r]
+
 int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init);
 unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
 int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
 int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
 int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
-u64 kvm_call_hyp(void *hypfn, ...);
+unsigned long kvm_call_hyp(void *hypfn, ...);
 void force_vm_exit(const cpumask_t *mask);
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
@@ -178,6 +228,10 @@ static inline void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm,
 
 struct kvm_vcpu *kvm_arm_get_running_vcpu(void);
 struct kvm_vcpu __percpu **kvm_get_running_vcpus(void);
+void kvm_arm_halt_guest(struct kvm *kvm);
+void kvm_arm_resume_guest(struct kvm *kvm);
+void kvm_arm_halt_vcpu(struct kvm_vcpu *vcpu);
+void kvm_arm_resume_vcpu(struct kvm_vcpu *vcpu);
 
 int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices);
 unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu);
@@ -187,8 +241,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *);
 int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
 		int exception_index);
 
-static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
-				       phys_addr_t pgd_ptr,
+static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
 				       unsigned long hyp_stack_ptr,
 				       unsigned long vector_ptr)
 {
@@ -197,23 +250,29 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
 	 * code. The init code doesn't need to preserve these
 	 * registers as r0-r3 are already callee saved according to
 	 * the AAPCS.
-	 * Note that we slightly misuse the prototype by casing the
+	 * Note that we slightly misuse the prototype by casting the
 	 * stack pointer to a void *.
-	 *
-	 * We don't have enough registers to perform the full init in
-	 * one go.  Install the boot PGD first, and then install the
-	 * runtime PGD, stack pointer and vectors. The PGDs are always
-	 * passed as the third argument, in order to be passed into
-	 * r2-r3 to the init code (yes, this is compliant with the
-	 * PCS!).
-	 */
 
-	kvm_call_hyp(NULL, 0, boot_pgd_ptr);
+	 * The PGDs are always passed as the third argument, in order
+	 * to be passed into r2-r3 to the init code (yes, this is
+	 * compliant with the PCS!).
+	 */
 
 	kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
 }
 
-static inline int kvm_arch_dev_ioctl_check_extension(long ext)
+static inline void __cpu_init_stage2(void)
+{
+	kvm_call_hyp(__init_stage2_translation);
+}
+
+static inline void __cpu_reset_hyp_mode(unsigned long vector_ptr,
+					phys_addr_t phys_idmap_start)
+{
+	kvm_call_hyp((void *)virt_to_idmap(__kvm_hyp_reset), vector_ptr);
+}
+
+static inline int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext)
 {
 	return 0;
 }
@@ -225,10 +284,30 @@ void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot);
 
 struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
 
-static inline void kvm_arch_hardware_disable(void) {}
 static inline void kvm_arch_hardware_unsetup(void) {}
 static inline void kvm_arch_sync_events(struct kvm *kvm) {}
 static inline void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
+static inline void kvm_arch_vcpu_block_finish(struct kvm_vcpu *vcpu) {}
+
+static inline void kvm_arm_init_debug(void) {}
+static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {}
+static inline int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
+					     struct kvm_device_attr *attr)
+{
+	return -ENXIO;
+}
+static inline int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
+					     struct kvm_device_attr *attr)
+{
+	return -ENXIO;
+}
+static inline int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
+					     struct kvm_device_attr *attr)
+{
+	return -ENXIO;
+}
 
 #endif /* __ARM_KVM_HOST_H__ */
diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h
new file mode 100644
index 000000000..6eaff28f2
--- /dev/null
+++ b/arch/arm/include/asm/kvm_hyp.h
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM_KVM_HYP_H__
+#define __ARM_KVM_HYP_H__
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_mmu.h>
+#include <asm/vfp.h>
+
+#define __hyp_text __section(.hyp.text) notrace
+
+#define __ACCESS_CP15(CRn, Op1, CRm, Op2)	\
+	"mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32
+#define __ACCESS_CP15_64(Op1, CRm)		\
+	"mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64
+#define __ACCESS_VFP(CRn)			\
+	"mrc", "mcr", __stringify(p10, 7, %0, CRn, cr0, 0), u32
+
+#define __write_sysreg(v, r, w, c, t)	asm volatile(w " " c : : "r" ((t)(v)))
+#define write_sysreg(v, ...)		__write_sysreg(v, __VA_ARGS__)
+
+#define __read_sysreg(r, w, c, t) ({				\
+	t __val;						\
+	asm volatile(r " " c : "=r" (__val));			\
+	__val;							\
+})
+#define read_sysreg(...)		__read_sysreg(__VA_ARGS__)
+
+#define write_special(v, r)					\
+	asm volatile("msr " __stringify(r) ", %0" : : "r" (v))
+#define read_special(r) ({					\
+	u32 __val;						\
+	asm volatile("mrs %0, " __stringify(r) : "=r" (__val));	\
+	__val;							\
+})
+
+#define TTBR0		__ACCESS_CP15_64(0, c2)
+#define TTBR1		__ACCESS_CP15_64(1, c2)
+#define VTTBR		__ACCESS_CP15_64(6, c2)
+#define PAR		__ACCESS_CP15_64(0, c7)
+#define CNTV_CVAL	__ACCESS_CP15_64(3, c14)
+#define CNTVOFF		__ACCESS_CP15_64(4, c14)
+
+#define MIDR		__ACCESS_CP15(c0, 0, c0, 0)
+#define CSSELR		__ACCESS_CP15(c0, 2, c0, 0)
+#define VPIDR		__ACCESS_CP15(c0, 4, c0, 0)
+#define VMPIDR		__ACCESS_CP15(c0, 4, c0, 5)
+#define SCTLR		__ACCESS_CP15(c1, 0, c0, 0)
+#define CPACR		__ACCESS_CP15(c1, 0, c0, 2)
+#define HCR		__ACCESS_CP15(c1, 4, c1, 0)
+#define HDCR		__ACCESS_CP15(c1, 4, c1, 1)
+#define HCPTR		__ACCESS_CP15(c1, 4, c1, 2)
+#define HSTR		__ACCESS_CP15(c1, 4, c1, 3)
+#define TTBCR		__ACCESS_CP15(c2, 0, c0, 2)
+#define HTCR		__ACCESS_CP15(c2, 4, c0, 2)
+#define VTCR		__ACCESS_CP15(c2, 4, c1, 2)
+#define DACR		__ACCESS_CP15(c3, 0, c0, 0)
+#define DFSR		__ACCESS_CP15(c5, 0, c0, 0)
+#define IFSR		__ACCESS_CP15(c5, 0, c0, 1)
+#define ADFSR		__ACCESS_CP15(c5, 0, c1, 0)
+#define AIFSR		__ACCESS_CP15(c5, 0, c1, 1)
+#define HSR		__ACCESS_CP15(c5, 4, c2, 0)
+#define DFAR		__ACCESS_CP15(c6, 0, c0, 0)
+#define IFAR		__ACCESS_CP15(c6, 0, c0, 2)
+#define HDFAR		__ACCESS_CP15(c6, 4, c0, 0)
+#define HIFAR		__ACCESS_CP15(c6, 4, c0, 2)
+#define HPFAR		__ACCESS_CP15(c6, 4, c0, 4)
+#define ICIALLUIS	__ACCESS_CP15(c7, 0, c1, 0)
+#define ATS1CPR		__ACCESS_CP15(c7, 0, c8, 0)
+#define TLBIALLIS	__ACCESS_CP15(c8, 0, c3, 0)
+#define TLBIALLNSNHIS	__ACCESS_CP15(c8, 4, c3, 4)
+#define PRRR		__ACCESS_CP15(c10, 0, c2, 0)
+#define NMRR		__ACCESS_CP15(c10, 0, c2, 1)
+#define AMAIR0		__ACCESS_CP15(c10, 0, c3, 0)
+#define AMAIR1		__ACCESS_CP15(c10, 0, c3, 1)
+#define VBAR		__ACCESS_CP15(c12, 0, c0, 0)
+#define CID		__ACCESS_CP15(c13, 0, c0, 1)
+#define TID_URW		__ACCESS_CP15(c13, 0, c0, 2)
+#define TID_URO		__ACCESS_CP15(c13, 0, c0, 3)
+#define TID_PRIV	__ACCESS_CP15(c13, 0, c0, 4)
+#define HTPIDR		__ACCESS_CP15(c13, 4, c0, 2)
+#define CNTKCTL		__ACCESS_CP15(c14, 0, c1, 0)
+#define CNTV_CTL	__ACCESS_CP15(c14, 0, c3, 1)
+#define CNTHCTL		__ACCESS_CP15(c14, 4, c1, 0)
+
+#define VFP_FPEXC	__ACCESS_VFP(FPEXC)
+
+/* AArch64 compatibility macros, only for the timer so far */
+#define read_sysreg_el0(r)		read_sysreg(r##_el0)
+#define write_sysreg_el0(v, r)		write_sysreg(v, r##_el0)
+
+#define cntv_ctl_el0			CNTV_CTL
+#define cntv_cval_el0			CNTV_CVAL
+#define cntvoff_el2			CNTVOFF
+#define cnthctl_el2			CNTHCTL
+
+void __timer_save_state(struct kvm_vcpu *vcpu);
+void __timer_restore_state(struct kvm_vcpu *vcpu);
+
+void __vgic_v2_save_state(struct kvm_vcpu *vcpu);
+void __vgic_v2_restore_state(struct kvm_vcpu *vcpu);
+
+void __sysreg_save_state(struct kvm_cpu_context *ctxt);
+void __sysreg_restore_state(struct kvm_cpu_context *ctxt);
+
+void asmlinkage __vfp_save_state(struct vfp_hard_struct *vfp);
+void asmlinkage __vfp_restore_state(struct vfp_hard_struct *vfp);
+static inline bool __vfp_enabled(void)
+{
+	return !(read_sysreg(HCPTR) & (HCPTR_TCP(11) | HCPTR_TCP(10)));
+}
+
+void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt);
+void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt);
+
+int asmlinkage __guest_enter(struct kvm_vcpu *vcpu,
+			     struct kvm_cpu_context *host);
+int asmlinkage __hyp_do_panic(const char *, int, u32);
+
+#endif /* __ARM_KVM_HYP_H__ */
diff --git a/arch/arm/include/asm/kvm_mmio.h b/arch/arm/include/asm/kvm_mmio.h
index d8e90c8cb..f3a7de71f 100644
--- a/arch/arm/include/asm/kvm_mmio.h
+++ b/arch/arm/include/asm/kvm_mmio.h
@@ -28,6 +28,9 @@ struct kvm_decode {
 	bool sign_extend;
 };
 
+void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data);
+unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len);
+
 int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
 		 phys_addr_t fault_ipa);
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 405aa1883..3bb803d68 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -26,16 +26,7 @@
  * We directly use the kernel VA for the HYP, as we can directly share
  * the mapping (HTTBR "covers" TTBR1).
  */
-#define HYP_PAGE_OFFSET_MASK	UL(~0)
-#define HYP_PAGE_OFFSET		PAGE_OFFSET
-#define KERN_TO_HYP(kva)	(kva)
-
-/*
- * Our virtual mapping for the boot-time MMU-enable code. Must be
- * shared across all the page-tables. Conveniently, we use the vectors
- * page, where no kernel data will ever be shared with HYP.
- */
-#define TRAMPOLINE_VA		UL(CONFIG_VECTORS_BASE)
+#define kern_hyp_va(kva)	(kva)
 
 /*
  * KVM_MMU_CACHE_MIN_PAGES is the number of stage2 page table translation levels.
@@ -47,10 +38,10 @@
 #include <linux/highmem.h>
 #include <asm/cacheflush.h>
 #include <asm/pgalloc.h>
+#include <asm/stage2_pgtable.h>
 
-int create_hyp_mappings(void *from, void *to);
+int create_hyp_mappings(void *from, void *to, pgprot_t prot);
 int create_hyp_io_mappings(void *from, void *to, phys_addr_t);
-void free_boot_hyp_pgd(void);
 void free_hyp_pgds(void);
 
 void stage2_unmap_vm(struct kvm *kvm);
@@ -64,8 +55,8 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run);
 void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
 
 phys_addr_t kvm_mmu_get_httbr(void);
-phys_addr_t kvm_mmu_get_boot_httbr(void);
 phys_addr_t kvm_get_idmap_vector(void);
+phys_addr_t kvm_get_idmap_start(void);
 int kvm_mmu_init(void);
 void kvm_clear_hyp_idmap(void);
 
@@ -105,14 +96,16 @@ static inline void kvm_clean_pte(pte_t *pte)
 	clean_pte_table(pte);
 }
 
-static inline void kvm_set_s2pte_writable(pte_t *pte)
+static inline pte_t kvm_s2pte_mkwrite(pte_t pte)
 {
-	pte_val(*pte) |= L_PTE_S2_RDWR;
+	pte_val(pte) |= L_PTE_S2_RDWR;
+	return pte;
 }
 
-static inline void kvm_set_s2pmd_writable(pmd_t *pmd)
+static inline pmd_t kvm_s2pmd_mkwrite(pmd_t pmd)
 {
-	pmd_val(*pmd) |= L_PMD_S2_RDWR;
+	pmd_val(pmd) |= L_PMD_S2_RDWR;
+	return pmd;
 }
 
 static inline void kvm_set_s2pte_readonly(pte_t *pte)
@@ -135,22 +128,6 @@ static inline bool kvm_s2pmd_readonly(pmd_t *pmd)
 	return (pmd_val(*pmd) & L_PMD_S2_RDWR) == L_PMD_S2_RDONLY;
 }
 
-
-/* Open coded p*d_addr_end that can deal with 64bit addresses */
-#define kvm_pgd_addr_end(addr, end)					\
-({	u64 __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK;		\
-	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
-})
-
-#define kvm_pud_addr_end(addr,end)		(end)
-
-#define kvm_pmd_addr_end(addr, end)					\
-({	u64 __boundary = ((addr) + PMD_SIZE) & PMD_MASK;		\
-	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
-})
-
-#define kvm_pgd_index(addr)			pgd_index(addr)
-
 static inline bool kvm_page_empty(void *ptr)
 {
 	struct page *ptr_page = virt_to_page(ptr);
@@ -159,19 +136,11 @@ static inline bool kvm_page_empty(void *ptr)
 
 #define kvm_pte_table_empty(kvm, ptep) kvm_page_empty(ptep)
 #define kvm_pmd_table_empty(kvm, pmdp) kvm_page_empty(pmdp)
-#define kvm_pud_table_empty(kvm, pudp) (0)
+#define kvm_pud_table_empty(kvm, pudp) false
 
-#define KVM_PREALLOC_LEVEL	0
-
-static inline void *kvm_get_hwpgd(struct kvm *kvm)
-{
-	return kvm->arch.pgd;
-}
-
-static inline unsigned int kvm_get_hwpgd_size(void)
-{
-	return PTRS_PER_S2_PGD * sizeof(pgd_t);
-}
+#define hyp_pte_table_empty(ptep) kvm_page_empty(ptep)
+#define hyp_pmd_table_empty(pmdp) kvm_page_empty(pmdp)
+#define hyp_pud_table_empty(pudp) false
 
 struct kvm;
 
@@ -179,10 +148,11 @@ struct kvm;
 
 static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
 {
-	return (vcpu->arch.cp15[c1_SCTLR] & 0b101) == 0b101;
+	return (vcpu_cp15(vcpu, c1_SCTLR) & 0b101) == 0b101;
 }
 
-static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
+static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu,
+					       kvm_pfn_t pfn,
 					       unsigned long size,
 					       bool ipa_uncached)
 {
@@ -246,7 +216,7 @@ static inline void __kvm_flush_dcache_pte(pte_t pte)
 static inline void __kvm_flush_dcache_pmd(pmd_t pmd)
 {
 	unsigned long size = PMD_SIZE;
-	pfn_t pfn = pmd_pfn(pmd);
+	kvm_pfn_t pfn = pmd_pfn(pmd);
 
 	while (size) {
 		void *va = kmap_atomic_pfn(pfn);
@@ -279,6 +249,11 @@ static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd,
 				       pgd_t *merged_hyp_pgd,
 				       unsigned long hyp_idmap_start) { }
 
+static inline unsigned int kvm_get_vmid_bits(void)
+{
+	return 8;
+}
+
 #endif	/* !__ASSEMBLY__ */
 
 #endif /* __ARM_KVM_MMU_H__ */
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index cb3a40717..5c1ad11aa 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -47,7 +47,7 @@ struct machine_desc {
 	unsigned		l2c_aux_val;	/* L2 cache aux value	*/
 	unsigned		l2c_aux_mask;	/* L2 cache aux mask	*/
 	void			(*l2c_write_sec)(unsigned long, unsigned);
-	struct smp_operations	*smp;		/* SMP operations	*/
+	const struct smp_operations	*smp;	/* SMP operations	*/
 	bool			(*smp_init)(void);
 	void			(*fixup)(struct tag *, char **);
 	void			(*dt_fixup)(void);
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index 2092ee1e1..de4634b51 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -23,10 +23,10 @@ extern int show_fiq_list(struct seq_file *, int);
 /*
  * This is for easy migration, but should be changed in the source
  */
-#define do_bad_IRQ(irq,desc)				\
+#define do_bad_IRQ(desc)				\
 do {							\
 	raw_spin_lock(&desc->lock);			\
-	handle_bad_irq(irq, desc);			\
+	handle_bad_irq(desc);				\
 	raw_spin_unlock(&desc->lock);			\
 } while(0)
 
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index f98c7f32c..9b7c328fb 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -42,6 +42,8 @@ enum {
 extern void iotable_init(struct map_desc *, int);
 extern void vm_reserve_area_early(unsigned long addr, unsigned long size,
 				  void *caller);
+extern void create_mapping_late(struct mm_struct *mm, struct map_desc *md,
+				bool ng);
 
 #ifdef CONFIG_DEBUG_LL
 extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr);
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 28b9bb359..2d88af5be 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -19,11 +19,10 @@ struct pci_bus;
 struct device;
 
 struct hw_pci {
-#ifdef CONFIG_PCI_MSI
 	struct msi_controller *msi_ctrl;
-#endif
 	struct pci_ops	*ops;
 	int		nr_controllers;
+	unsigned int	io_optional:1;
 	void		**private_data;
 	int		(*setup)(int nr, struct pci_sys_data *);
 	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
@@ -42,9 +41,6 @@ struct hw_pci {
  * Per-controller structure
  */
 struct pci_sys_data {
-#ifdef CONFIG_PCI_MSI
-	struct msi_controller *msi_ctrl;
-#endif
 	struct list_head node;
 	int		busnr;		/* primary bus number			*/
 	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
@@ -57,12 +53,6 @@ struct pci_sys_data {
 	u8		(*swizzle)(struct pci_dev *, u8 *);
 					/* IRQ mapping				*/
 	int		(*map_irq)(const struct pci_dev *, u8, u8);
-					/* Resource alignement requirements	*/
-	resource_size_t (*align_resource)(struct pci_dev *dev,
-					  const struct resource *res,
-					  resource_size_t start,
-					  resource_size_t size,
-					  resource_size_t align);
 	void		*private_data;	/* platform controller private data	*/
 };
 
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index b7f6fb462..31c07a2cc 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -76,10 +76,12 @@
  */
 #define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))
 
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 /*
  * Allow 16MB-aligned ioremap pages
  */
 #define IOREMAP_MAX_ORDER	24
+#endif
 
 #else /* CONFIG_MMU */
 
@@ -119,12 +121,6 @@
 #endif
 
 /*
- * Convert a physical address to a Page Frame Number and back
- */
-#define	__phys_to_pfn(paddr)	((unsigned long)((paddr) >> PAGE_SHIFT))
-#define	__pfn_to_phys(pfn)	((phys_addr_t)(pfn) << PAGE_SHIFT)
-
-/*
  * Convert a page to/from a physical address
  */
 #define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
@@ -138,6 +134,21 @@
  */
 #define PLAT_PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
 
+#ifdef CONFIG_XIP_KERNEL
+/*
+ * When referencing data in RAM from the XIP region in a relative manner
+ * with the MMU off, we need the relative offset between the two physical
+ * addresses.  The macro below achieves this, which is:
+ *    __pa(v_data) - __xip_pa(v_text)
+ */
+#define PHYS_RELATIVE(v_data, v_text) \
+	(((v_data) - PAGE_OFFSET + PLAT_PHYS_OFFSET) - \
+	 ((v_text) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + \
+          CONFIG_XIP_PHYS_ADDR))
+#else
+#define PHYS_RELATIVE(v_data, v_text) ((v_data) - (v_text))
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -277,19 +288,43 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
 #define pfn_to_kaddr(pfn)	__va((phys_addr_t)(pfn) << PAGE_SHIFT)
 
-extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
+extern long long arch_phys_to_idmap_offset;
 
 /*
- * These are for systems that have a hardware interconnect supported alias of
- * physical memory for idmap purposes.  Most cases should leave these
- * untouched.
+ * These are for systems that have a hardware interconnect supported alias
+ * of physical memory for idmap purposes.  Most cases should leave these
+ * untouched.  Note: this can only return addresses less than 4GiB.
  */
-static inline phys_addr_t __virt_to_idmap(unsigned long x)
+static inline bool arm_has_idmap_alias(void)
 {
-	if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap)
-		return arch_virt_to_idmap(x);
-	else
-		return __virt_to_phys(x);
+	return IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset != 0;
+}
+
+#define IDMAP_INVALID_ADDR ((u32)~0)
+
+static inline unsigned long phys_to_idmap(phys_addr_t addr)
+{
+	if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset) {
+		addr += arch_phys_to_idmap_offset;
+		if (addr > (u32)~0)
+			addr = IDMAP_INVALID_ADDR;
+	}
+	return addr;
+}
+
+static inline phys_addr_t idmap_to_phys(unsigned long idmap)
+{
+	phys_addr_t addr = idmap;
+
+	if (IS_ENABLED(CONFIG_MMU) && arch_phys_to_idmap_offset)
+		addr -= arch_phys_to_idmap_offset;
+
+	return addr;
+}
+
+static inline unsigned long __virt_to_idmap(unsigned long x)
+{
+	return phys_to_idmap(__virt_to_phys(x));
 }
 
 #define virt_to_idmap(x)	__virt_to_idmap((unsigned long)(x))
@@ -307,20 +342,6 @@ static inline phys_addr_t __virt_to_idmap(unsigned long x)
 #define __bus_to_pfn(x)	__phys_to_pfn(x)
 #endif
 
-#ifdef CONFIG_VIRT_TO_BUS
-#define virt_to_bus virt_to_bus
-static inline __deprecated unsigned long virt_to_bus(void *x)
-{
-	return __virt_to_bus((unsigned long)x);
-}
-
-#define bus_to_virt bus_to_virt
-static inline __deprecated void *bus_to_virt(unsigned long x)
-{
-	return (void *)__bus_to_virt(x);
-}
-#endif
-
 /*
  * Conversion between a struct page and a physical address.
  *
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 9b32f76bb..3cc14dd85 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -15,6 +15,7 @@
 
 #include <linux/compiler.h>
 #include <linux/sched.h>
+#include <linux/preempt.h>
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
 #include <asm/proc-fns.h>
@@ -26,7 +27,12 @@ void __check_vmalloc_seq(struct mm_struct *mm);
 #ifdef CONFIG_CPU_HAS_ASID
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
-#define init_new_context(tsk,mm)	({ atomic64_set(&mm->context.id, 0); 0; })
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	atomic64_set(&mm->context.id, 0);
+	return 0;
+}
 
 #ifdef CONFIG_ARM_ERRATA_798181
 void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
@@ -61,6 +67,7 @@ static inline void check_and_switch_context(struct mm_struct *mm,
 		cpu_switch_mm(mm->pgd, mm);
 }
 
+#ifndef MODULE
 #define finish_arch_post_lock_switch \
 	finish_arch_post_lock_switch
 static inline void finish_arch_post_lock_switch(void)
@@ -82,10 +89,16 @@ static inline void finish_arch_post_lock_switch(void)
 		preempt_enable_no_resched();
 	}
 }
+#endif /* !MODULE */
 
 #endif	/* CONFIG_MMU */
 
-#define init_new_context(tsk,mm)	0
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	return 0;
+}
+
 
 #endif	/* CONFIG_CPU_HAS_ASID */
 
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index 563b92fc2..c2bf24f40 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -129,21 +129,4 @@ static inline void outer_resume(void) { }
 
 #endif
 
-#ifdef CONFIG_OUTER_CACHE_SYNC
-/**
- * outer_sync - perform a sync point for outer cache
- *
- * Ensure that all outer cache operations are complete and any store
- * buffers are drained.
- */
-static inline void outer_sync(void)
-{
-	if (outer_cache.sync)
-		outer_cache.sync();
-}
-#else
-static inline void outer_sync(void)
-{ }
-#endif
-
 #endif	/* __ASM_OUTERCACHE_H */
diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index d1b162a18..503f48805 100644
--- a/arch/arm/include/asm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -17,9 +17,6 @@
 #define KTHREAD_SIZE PAGE_SIZE
 #endif
  
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
 #define clear_page(page)	memset((page), 0, PAGE_SIZE)
 #define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
 
diff --git a/arch/arm/include/asm/paravirt.h b/arch/arm/include/asm/paravirt.h
new file mode 100644
index 000000000..8435ff591
--- /dev/null
+++ b/arch/arm/include/asm/paravirt.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_ARM_PARAVIRT_H
+#define _ASM_ARM_PARAVIRT_H
+
+#ifdef CONFIG_PARAVIRT
+struct static_key;
+extern struct static_key paravirt_steal_enabled;
+extern struct static_key paravirt_steal_rq_enabled;
+
+struct pv_time_ops {
+	unsigned long long (*steal_clock)(int cpu);
+};
+extern struct pv_time_ops pv_time_ops;
+
+static inline u64 paravirt_steal_clock(int cpu)
+{
+	return pv_time_ops.steal_clock(cpu);
+}
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index a5635444c..057d381f4 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -2,9 +2,6 @@
 #define ASMARM_PCI_H
 
 #ifdef __KERNEL__
-#include <asm-generic/pci-dma-compat.h>
-#include <asm-generic/pci-bridge.h>
-
 #include <asm/mach/pci.h> /* for pci_sys_data */
 
 extern unsigned long pcibios_min_io;
@@ -41,5 +38,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 }
 
 #endif /* __KERNEL__ */
- 
 #endif
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 19cfab526..b2902a5cd 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -29,7 +29,7 @@
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
-	return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+	return (pmd_t *)get_zeroed_page(GFP_KERNEL);
 }
 
 static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
@@ -57,7 +57,7 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
 extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
 
-#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
 
 static inline void clean_pte_table(pte_t *pte)
 {
diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h
index 5e68278e9..3f82e9da7 100644
--- a/arch/arm/include/asm/pgtable-2level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-2level-hwdef.h
@@ -23,6 +23,7 @@
 #define PMD_PXNTABLE		(_AT(pmdval_t, 1) << 2)     /* v7 */
 #define PMD_BIT4		(_AT(pmdval_t, 1) << 4)
 #define PMD_DOMAIN(x)		(_AT(pmdval_t, (x)) << 5)
+#define PMD_DOMAIN_MASK		PMD_DOMAIN(0x0f)
 #define PMD_PROTECTION		(_AT(pmdval_t, 1) << 9)		/* v5 */
 /*
  *   - section
@@ -46,6 +47,7 @@
 #define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
 #define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
 #define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_CACHE_MASK	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
 #define PMD_SECT_NONSHARED_DEV	(PMD_SECT_TEX(2))
 
 /*
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index aeddd28b3..92fd2c8a9 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -193,6 +193,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 
 #define pmd_large(pmd)		(pmd_val(pmd) & 2)
 #define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+#define pmd_present(pmd)	(pmd_val(pmd))
 
 #define copy_pmd(pmdpd,pmdps)		\
 	do {				\
diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
index f8f1cff62..4cd664abf 100644
--- a/arch/arm/include/asm/pgtable-3level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -62,6 +62,7 @@
 #define PMD_SECT_WT		(_AT(pmdval_t, 2) << 2)	/* normal inner write-through */
 #define PMD_SECT_WB		(_AT(pmdval_t, 3) << 2)	/* normal inner write-back */
 #define PMD_SECT_WBWA		(_AT(pmdval_t, 7) << 2)	/* normal inner write-alloc */
+#define PMD_SECT_CACHE_MASK	(_AT(pmdval_t, 7) << 2)
 
 /*
  * + Level 3 descriptor (PTE)
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index a745a2a53..2a029bcea 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -88,7 +88,6 @@
 
 #define L_PMD_SECT_VALID	(_AT(pmdval_t, 1) << 0)
 #define L_PMD_SECT_DIRTY	(_AT(pmdval_t, 1) << 55)
-#define L_PMD_SECT_SPLITTING	(_AT(pmdval_t, 1) << 56)
 #define L_PMD_SECT_NONE		(_AT(pmdval_t, 1) << 57)
 #define L_PMD_SECT_RDONLY	(_AT(pteval_t, 1) << 58)
 
@@ -212,6 +211,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 						: !!(pmd_val(pmd) & (val)))
 #define pmd_isclear(pmd, val)	(!(pmd_val(pmd) & (val)))
 
+#define pmd_present(pmd)	(pmd_isset((pmd), L_PMD_SECT_VALID))
 #define pmd_young(pmd)		(pmd_isset((pmd), PMD_SECT_AF))
 #define pte_special(pte)	(pte_isset((pte), L_PTE_SPECIAL))
 static inline pte_t pte_mkspecial(pte_t pte)
@@ -232,13 +232,6 @@ static inline pte_t pte_mkspecial(pte_t pte)
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !pmd_table(pmd))
-#define pmd_trans_splitting(pmd) (pmd_isset((pmd), L_PMD_SECT_SPLITTING))
-
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
-#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
-			  pmd_t *pmdp);
-#endif
 #endif
 
 #define PMD_BIT_FUNC(fn,op) \
@@ -246,9 +239,9 @@ static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; }
 
 PMD_BIT_FUNC(wrprotect,	|= L_PMD_SECT_RDONLY);
 PMD_BIT_FUNC(mkold,	&= ~PMD_SECT_AF);
-PMD_BIT_FUNC(mksplitting, |= L_PMD_SECT_SPLITTING);
 PMD_BIT_FUNC(mkwrite,   &= ~L_PMD_SECT_RDONLY);
 PMD_BIT_FUNC(mkdirty,   |= L_PMD_SECT_DIRTY);
+PMD_BIT_FUNC(mkclean,   &= ~L_PMD_SECT_DIRTY);
 PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 
 #define pmd_mkhuge(pmd)		(__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT))
@@ -257,10 +250,10 @@ PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 #define pfn_pmd(pfn,prot)	(__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
 #define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
-/* represent a notpresent pmd by zero, this is used by pmdp_invalidate */
+/* represent a notpresent pmd by faulting entry, this is used by pmdp_invalidate */
 static inline pmd_t pmd_mknotpresent(pmd_t pmd)
 {
-	return __pmd(0);
+	return __pmd(pmd_val(pmd) & ~L_PMD_SECT_VALID);
 }
 
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
@@ -289,11 +282,6 @@ static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 	flush_pmd_entry(pmdp);
 }
 
-static inline int has_transparent_hugepage(void)
-{
-	return 1;
-}
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_PGTABLE_3LEVEL_H */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index f40354198..a8d656d9a 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -43,7 +43,7 @@
  */
 #define VMALLOC_OFFSET		(8*1024*1024)
 #define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#define VMALLOC_END		0xff000000UL
+#define VMALLOC_END		0xff800000UL
 
 #define LIBRARY_TEXT_START	0x0c000000
 
@@ -97,7 +97,9 @@ extern pgprot_t		pgprot_s2_device;
 #define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
 #define PAGE_KERNEL		_MOD_PROT(pgprot_kernel, L_PTE_XN)
 #define PAGE_KERNEL_EXEC	pgprot_kernel
-#define PAGE_HYP		_MOD_PROT(pgprot_kernel, L_PTE_HYP)
+#define PAGE_HYP		_MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_XN)
+#define PAGE_HYP_EXEC		_MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY)
+#define PAGE_HYP_RO		_MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY | L_PTE_XN)
 #define PAGE_HYP_DEVICE		_MOD_PROT(pgprot_hyp_device, L_PTE_HYP)
 #define PAGE_S2			_MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY)
 #define PAGE_S2_DEVICE		_MOD_PROT(pgprot_s2_device, L_PTE_S2_RDONLY)
@@ -182,7 +184,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 #define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
 
 #define pmd_none(pmd)		(!pmd_val(pmd))
-#define pmd_present(pmd)	(pmd_val(pmd))
 
 static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 {
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
deleted file mode 100644
index 3fc87dfd7..000000000
--- a/arch/arm/include/asm/pmu.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- *  linux/arch/arm/include/asm/pmu.h
- *
- *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ARM_PMU_H__
-#define __ARM_PMU_H__
-
-#include <linux/interrupt.h>
-#include <linux/perf_event.h>
-
-#include <asm/cputype.h>
-
-/*
- * struct arm_pmu_platdata - ARM PMU platform data
- *
- * @handle_irq: an optional handler which will be called from the
- *	interrupt and passed the address of the low level handler,
- *	and can be used to implement any platform specific handling
- *	before or after calling it.
- */
-struct arm_pmu_platdata {
-	irqreturn_t (*handle_irq)(int irq, void *dev,
-				  irq_handler_t pmu_handler);
-};
-
-#ifdef CONFIG_HW_PERF_EVENTS
-
-/*
- * The ARMv7 CPU PMU supports up to 32 event counters.
- */
-#define ARMPMU_MAX_HWEVENTS		32
-
-#define HW_OP_UNSUPPORTED		0xFFFF
-#define C(_x)				PERF_COUNT_HW_CACHE_##_x
-#define CACHE_OP_UNSUPPORTED		0xFFFF
-
-#define PERF_MAP_ALL_UNSUPPORTED					\
-	[0 ... PERF_COUNT_HW_MAX - 1] = HW_OP_UNSUPPORTED
-
-#define PERF_CACHE_MAP_ALL_UNSUPPORTED					\
-[0 ... C(MAX) - 1] = {							\
-	[0 ... C(OP_MAX) - 1] = {					\
-		[0 ... C(RESULT_MAX) - 1] = CACHE_OP_UNSUPPORTED,	\
-	},								\
-}
-
-/* The events for a given PMU register set. */
-struct pmu_hw_events {
-	/*
-	 * The events that are active on the PMU for the given index.
-	 */
-	struct perf_event	*events[ARMPMU_MAX_HWEVENTS];
-
-	/*
-	 * A 1 bit for an index indicates that the counter is being used for
-	 * an event. A 0 means that the counter can be used.
-	 */
-	DECLARE_BITMAP(used_mask, ARMPMU_MAX_HWEVENTS);
-
-	/*
-	 * Hardware lock to serialize accesses to PMU registers. Needed for the
-	 * read/modify/write sequences.
-	 */
-	raw_spinlock_t		pmu_lock;
-
-	/*
-	 * When using percpu IRQs, we need a percpu dev_id. Place it here as we
-	 * already have to allocate this struct per cpu.
-	 */
-	struct arm_pmu		*percpu_pmu;
-};
-
-struct arm_pmu {
-	struct pmu	pmu;
-	cpumask_t	active_irqs;
-	cpumask_t	supported_cpus;
-	int		*irq_affinity;
-	char		*name;
-	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
-	void		(*enable)(struct perf_event *event);
-	void		(*disable)(struct perf_event *event);
-	int		(*get_event_idx)(struct pmu_hw_events *hw_events,
-					 struct perf_event *event);
-	void		(*clear_event_idx)(struct pmu_hw_events *hw_events,
-					 struct perf_event *event);
-	int		(*set_event_filter)(struct hw_perf_event *evt,
-					    struct perf_event_attr *attr);
-	u32		(*read_counter)(struct perf_event *event);
-	void		(*write_counter)(struct perf_event *event, u32 val);
-	void		(*start)(struct arm_pmu *);
-	void		(*stop)(struct arm_pmu *);
-	void		(*reset)(void *);
-	int		(*request_irq)(struct arm_pmu *, irq_handler_t handler);
-	void		(*free_irq)(struct arm_pmu *);
-	int		(*map_event)(struct perf_event *event);
-	int		num_events;
-	atomic_t	active_events;
-	struct mutex	reserve_mutex;
-	u64		max_period;
-	struct platform_device	*plat_device;
-	struct pmu_hw_events	__percpu *hw_events;
-	struct notifier_block	hotplug_nb;
-};
-
-#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
-
-int armpmu_register(struct arm_pmu *armpmu, int type);
-
-u64 armpmu_event_update(struct perf_event *event);
-
-int armpmu_event_set_period(struct perf_event *event);
-
-int armpmu_map_event(struct perf_event *event,
-		     const unsigned (*event_map)[PERF_COUNT_HW_MAX],
-		     const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
-						[PERF_COUNT_HW_CACHE_OP_MAX]
-						[PERF_COUNT_HW_CACHE_RESULT_MAX],
-		     u32 raw_event_mask);
-
-struct pmu_probe_info {
-	unsigned int cpuid;
-	unsigned int mask;
-	int (*init)(struct arm_pmu *);
-};
-
-#define PMU_PROBE(_cpuid, _mask, _fn)	\
-{					\
-	.cpuid = (_cpuid),		\
-	.mask = (_mask),		\
-	.init = (_fn),			\
-}
-
-#define ARM_PMU_PROBE(_cpuid, _fn) \
-	PMU_PROBE(_cpuid, ARM_CPU_PART_MASK, _fn)
-
-#define ARM_PMU_XSCALE_MASK	((0xff << 24) | ARM_CPU_XSCALE_ARCH_MASK)
-
-#define XSCALE_PMU_PROBE(_version, _fn) \
-	PMU_PROBE(ARM_CPU_IMP_INTEL << 24 | _version, ARM_PMU_XSCALE_MASK, _fn)
-
-int arm_pmu_device_probe(struct platform_device *pdev,
-			 const struct of_device_id *of_table,
-			 const struct pmu_probe_info *probe_table);
-
-#endif /* CONFIG_HW_PERF_EVENTS */
-
-#endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h
index c25ef3ec6..e1b825dfa 100644
--- a/arch/arm/include/asm/psci.h
+++ b/arch/arm/include/asm/psci.h
@@ -14,34 +14,11 @@
 #ifndef __ASM_ARM_PSCI_H
 #define __ASM_ARM_PSCI_H
 
-#define PSCI_POWER_STATE_TYPE_STANDBY		0
-#define PSCI_POWER_STATE_TYPE_POWER_DOWN	1
+extern const struct smp_operations psci_smp_ops;
 
-struct psci_power_state {
-	u16	id;
-	u8	type;
-	u8	affinity_level;
-};
-
-struct psci_operations {
-	int (*cpu_suspend)(struct psci_power_state state,
-			   unsigned long entry_point);
-	int (*cpu_off)(struct psci_power_state state);
-	int (*cpu_on)(unsigned long cpuid, unsigned long entry_point);
-	int (*migrate)(unsigned long cpuid);
-	int (*affinity_info)(unsigned long target_affinity,
-			unsigned long lowest_affinity_level);
-	int (*migrate_info_type)(void);
-};
-
-extern struct psci_operations psci_ops;
-extern struct smp_operations psci_smp_ops;
-
-#ifdef CONFIG_ARM_PSCI
-int psci_init(void);
+#if defined(CONFIG_SMP) && defined(CONFIG_ARM_PSCI)
 bool psci_smp_available(void);
 #else
-static inline int psci_init(void) { return 0; }
 static inline bool psci_smp_available(void) { return false; }
 #endif
 
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 51622ba7c..e9c9a117b 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -13,10 +13,20 @@
 #include <uapi/asm/ptrace.h>
 
 #ifndef __ASSEMBLY__
+#include <linux/types.h>
+
 struct pt_regs {
 	unsigned long uregs[18];
 };
 
+struct svc_pt_regs {
+	struct pt_regs regs;
+	u32 dacr;
+	u32 addr_limit;
+};
+
+#define to_svc_pt_regs(r) container_of(r, struct svc_pt_regs, regs)
+
 #define user_mode(regs)	\
 	(((regs)->ARM_cpsr & 0xf) == 0)
 
diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h
new file mode 100644
index 000000000..803bbf2b2
--- /dev/null
+++ b/arch/arm/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_ARM_SECTIONS_H
+#define _ASM_ARM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char _exiprom[];
+
+#endif	/* _ASM_ARM_SECTIONS_H */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index e0adb9f1b..3613d7e9f 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -25,4 +25,10 @@ extern int arm_add_memory(u64 start, u64 size);
 extern void early_print(const char *str, ...);
 extern void dump_machine_table(void);
 
+#ifdef CONFIG_ATAGS_PROC
+extern void save_atags(const struct tag *tags);
+#else
+static inline void save_atags(const struct tag *tags) { }
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 2f3ac1ba6..3d6dc8b46 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -74,7 +74,6 @@ extern void secondary_startup_arm(void);
 extern int __cpu_disable(void);
 
 extern void __cpu_die(unsigned int cpu);
-extern void cpu_die(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
@@ -105,6 +104,7 @@ struct smp_operations {
 #ifdef CONFIG_HOTPLUG_CPU
 	int  (*cpu_kill)(unsigned int cpu);
 	void (*cpu_die)(unsigned int cpu);
+	bool  (*cpu_can_disable)(unsigned int cpu);
 	int  (*cpu_disable)(unsigned int cpu);
 #endif
 #endif
@@ -112,7 +112,7 @@ struct smp_operations {
 
 struct of_cpu_method {
 	const char *method;
-	struct smp_operations *ops;
+	const struct smp_operations *ops;
 };
 
 #define CPU_METHOD_OF_DECLARE(name, _method, _ops)			\
@@ -122,6 +122,6 @@ struct of_cpu_method {
 /*
  * set platform specific SMP operations
  */
-extern void smp_set_ops(struct smp_operations *);
+extern void smp_set_ops(const struct smp_operations *);
 
 #endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index 993e5224d..f9080717f 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -107,4 +107,13 @@ static inline u32 mpidr_hash_size(void)
 extern int platform_can_secondary_boot(void);
 extern int platform_can_cpu_hotplug(void);
 
+#ifdef CONFIG_HOTPLUG_CPU
+extern int platform_can_hotplug_cpu(unsigned int cpu);
+#else
+static inline int platform_can_hotplug_cpu(unsigned int cpu)
+{
+	return 0;
+}
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
index 00098615c..73e5e8513 100644
--- a/arch/arm/include/asm/sparsemem.h
+++ b/arch/arm/include/asm/sparsemem.h
@@ -15,10 +15,11 @@
  * Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000,
  * then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26.
  *
- * Define these in your mach/memory.h.
+ * These can be overridden in your mach/memory.h.
  */
-#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS)
-#error Sparsemem is not supported on this platform
+#if !defined(MAX_PHYSMEM_BITS) || !defined(SECTION_SIZE_BITS)
+#define MAX_PHYSMEM_BITS	36
+#define SECTION_SIZE_BITS	28
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index 0fa418463..4bec45442 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -6,6 +6,8 @@
 #endif
 
 #include <linux/prefetch.h>
+#include <asm/barrier.h>
+#include <asm/processor.h>
 
 /*
  * sev and wfe are ARMv6K extensions.  Uniprocessor ARMv6 may not have the K
@@ -50,8 +52,21 @@ static inline void dsb_sev(void)
  * memory.
  */
 
-#define arch_spin_unlock_wait(lock) \
-	do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
+static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
+{
+	u16 owner = READ_ONCE(lock->tickets.owner);
+
+	for (;;) {
+		arch_spinlock_t tmp = READ_ONCE(*lock);
+
+		if (tmp.tickets.owner == tmp.tickets.next ||
+		    tmp.tickets.owner != owner)
+			break;
+
+		wfe();
+	}
+	smp_acquire__after_ctrl_dep();
+}
 
 #define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
 
diff --git a/arch/arm/include/asm/stage2_pgtable.h b/arch/arm/include/asm/stage2_pgtable.h
new file mode 100644
index 000000000..460d616bb
--- /dev/null
+++ b/arch/arm/include/asm/stage2_pgtable.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2016 - ARM Ltd
+ *
+ * stage2 page table helpers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM_S2_PGTABLE_H_
+#define __ARM_S2_PGTABLE_H_
+
+#define stage2_pgd_none(pgd)			pgd_none(pgd)
+#define stage2_pgd_clear(pgd)			pgd_clear(pgd)
+#define stage2_pgd_present(pgd)			pgd_present(pgd)
+#define stage2_pgd_populate(pgd, pud)		pgd_populate(NULL, pgd, pud)
+#define stage2_pud_offset(pgd, address)		pud_offset(pgd, address)
+#define stage2_pud_free(pud)			pud_free(NULL, pud)
+
+#define stage2_pud_none(pud)			pud_none(pud)
+#define stage2_pud_clear(pud)			pud_clear(pud)
+#define stage2_pud_present(pud)			pud_present(pud)
+#define stage2_pud_populate(pud, pmd)		pud_populate(NULL, pud, pmd)
+#define stage2_pmd_offset(pud, address)		pmd_offset(pud, address)
+#define stage2_pmd_free(pmd)			pmd_free(NULL, pmd)
+
+#define stage2_pud_huge(pud)			pud_huge(pud)
+
+/* Open coded p*d_addr_end that can deal with 64bit addresses */
+static inline phys_addr_t stage2_pgd_addr_end(phys_addr_t addr, phys_addr_t end)
+{
+	phys_addr_t boundary = (addr + PGDIR_SIZE) & PGDIR_MASK;
+
+	return (boundary - 1 < end - 1) ? boundary : end;
+}
+
+#define stage2_pud_addr_end(addr, end)		(end)
+
+static inline phys_addr_t stage2_pmd_addr_end(phys_addr_t addr, phys_addr_t end)
+{
+	phys_addr_t boundary = (addr + PMD_SIZE) & PMD_MASK;
+
+	return (boundary - 1 < end - 1) ? boundary : end;
+}
+
+#define stage2_pgd_index(addr)				pgd_index(addr)
+
+#define stage2_pte_table_empty(ptep)			kvm_page_empty(ptep)
+#define stage2_pmd_table_empty(pmdp)			kvm_page_empty(pmdp)
+#define stage2_pud_table_empty(pudp)			false
+
+#endif	/* __ARM_S2_PGTABLE_H_ */
diff --git a/arch/arm/include/asm/switch_to.h b/arch/arm/include/asm/switch_to.h
index c99e25946..12ebfcc1d 100644
--- a/arch/arm/include/asm/switch_to.h
+++ b/arch/arm/include/asm/switch_to.h
@@ -10,7 +10,9 @@
  * CPU.
  */
 #if defined(CONFIG_PREEMPT) && defined(CONFIG_SMP) && defined(CONFIG_CPU_V7)
-#define finish_arch_switch(prev)	dsb(ish)
+#define __complete_pending_tlbi()	dsb(ish)
+#else
+#define __complete_pending_tlbi()
 #endif
 
 /*
@@ -22,6 +24,7 @@ extern struct task_struct *__switch_to(struct task_struct *, struct thread_info
 
 #define switch_to(prev,next,last)					\
 do {									\
+	__complete_pending_tlbi();					\
 	last = __switch_to(prev,task_thread_info(prev), task_thread_info(next));	\
 } while (0)
 
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index bd32eded3..776757d16 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -25,7 +25,6 @@
 struct task_struct;
 
 #include <asm/types.h>
-#include <asm/domain.h>
 
 typedef unsigned long mm_segment_t;
 
@@ -74,9 +73,6 @@ struct thread_info {
 	.flags		= 0,						\
 	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.addr_limit	= KERNEL_DS,					\
-	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
-			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
-			  domain_val(DOMAIN_IO, DOMAIN_CLIENT),		\
 }
 
 #define init_thread_info	(init_thread_union.thread_info)
@@ -136,22 +132,18 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 
 /*
  * thread information flags:
- *  TIF_SYSCALL_TRACE	- syscall trace active
- *  TIF_SYSCAL_AUDIT	- syscall auditing active
- *  TIF_SIGPENDING	- signal pending
- *  TIF_NEED_RESCHED	- rescheduling necessary
- *  TIF_NOTIFY_RESUME	- callback before returning to user
  *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
  *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
  */
-#define TIF_SIGPENDING		0
-#define TIF_NEED_RESCHED	1
+#define TIF_SIGPENDING		0	/* signal pending */
+#define TIF_NEED_RESCHED	1	/* rescheduling necessary */
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
-#define TIF_UPROBE		7
-#define TIF_SYSCALL_TRACE	8
-#define TIF_SYSCALL_AUDIT	9
-#define TIF_SYSCALL_TRACEPOINT	10
-#define TIF_SECCOMP		11	/* seccomp syscall filtering active */
+#define TIF_UPROBE		3	/* breakpointed or singlestepping */
+#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT	6	/* syscall tracepoint instrumentation */
+#define TIF_SECCOMP		7	/* seccomp syscall filtering active */
+
 #define TIF_NOHZ		12	/* in adaptive nohz mode */
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 3cadb726e..1e25cd805 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -209,17 +209,38 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 		tlb_flush(tlb);
 }
 
-static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 {
+	if (tlb->nr == tlb->max)
+		return true;
 	tlb->pages[tlb->nr++] = page;
-	VM_BUG_ON(tlb->nr > tlb->max);
-	return tlb->max - tlb->nr;
+	return false;
 }
 
 static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 {
-	if (!__tlb_remove_page(tlb, page))
+	if (__tlb_remove_page(tlb, page)) {
 		tlb_flush_mmu(tlb);
+		__tlb_remove_page(tlb, page);
+	}
+}
+
+static inline bool __tlb_remove_page_size(struct mmu_gather *tlb,
+					  struct page *page, int page_size)
+{
+	return __tlb_remove_page(tlb, page);
+}
+
+static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb,
+					 struct page *page)
+{
+	return __tlb_remove_page(tlb, page);
+}
+
+static inline void tlb_remove_page_size(struct mmu_gather *tlb,
+					struct page *page, int page_size)
+{
+	return tlb_remove_page(tlb, page);
 }
 
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 74b17d09e..a93c0f99a 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -50,6 +50,35 @@ struct exception_table_entry
 extern int fixup_exception(struct pt_regs *regs);
 
 /*
+ * These two functions allow hooking accesses to userspace to increase
+ * system integrity by ensuring that the kernel can not inadvertantly
+ * perform such accesses (eg, via list poison values) which could then
+ * be exploited for priviledge escalation.
+ */
+static inline unsigned int uaccess_save_and_enable(void)
+{
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	unsigned int old_domain = get_domain();
+
+	/* Set the current domain access to permit user accesses */
+	set_domain((old_domain & ~domain_mask(DOMAIN_USER)) |
+		   domain_val(DOMAIN_USER, DOMAIN_CLIENT));
+
+	return old_domain;
+#else
+	return 0;
+#endif
+}
+
+static inline void uaccess_restore(unsigned int flags)
+{
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/* Restore the user access mask */
+	set_domain(flags);
+#endif
+}
+
+/*
  * These two are intentionally not defined anywhere - if the kernel
  * code generates any references to them, that's a bug.
  */
@@ -75,14 +104,6 @@ static inline void set_fs(mm_segment_t fs)
 
 #define segment_eq(a, b)	((a) == (b))
 
-#define __addr_ok(addr) ({ \
-	unsigned long flag; \
-	__asm__("cmp %2, %0; movlo %0, #0" \
-		: "=&r" (flag) \
-		: "0" (current_thread_info()->addr_limit), "r" (addr) \
-		: "cc"); \
-	(flag == 0); })
-
 /* We use 33-bit arithmetic here... */
 #define __range_ok(addr, size) ({ \
 	unsigned long flag, roksum; \
@@ -165,6 +186,7 @@ extern int __get_user_64t_4(void *);
 		register typeof(x) __r2 asm("r2");			\
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
+		unsigned int __ua_flags = uaccess_save_and_enable();	\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
 			if (sizeof((x)) >= 8)				\
@@ -192,6 +214,7 @@ extern int __get_user_64t_4(void *);
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
+		uaccess_restore(__ua_flags);				\
 		x = (typeof(*(p))) __r2;				\
 		__e;							\
 	})
@@ -207,47 +230,23 @@ extern int __put_user_2(void *, unsigned int);
 extern int __put_user_4(void *, unsigned int);
 extern int __put_user_8(void *, unsigned long long);
 
-#define __put_user_x(__r2, __p, __e, __l, __s)				\
-	   __asm__ __volatile__ (					\
-		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
-		__asmeq("%3", "r1")					\
-		"bl	__put_user_" #__s				\
-		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2), "r" (__l)			\
-		: "ip", "lr", "cc")
-
-#define __put_user_check(x, p)						\
+#define __put_user_check(__pu_val, __ptr, __err, __s)			\
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
-		const typeof(*(p)) __user *__tmp_p = (p);		\
-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
+		register typeof(__pu_val) __r2 asm("r2") = __pu_val;	\
+		register const void __user *__p asm("r0") = __ptr;	\
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
-		switch (sizeof(*(__p))) {				\
-		case 1:							\
-			__put_user_x(__r2, __p, __e, __l, 1);		\
-			break;						\
-		case 2:							\
-			__put_user_x(__r2, __p, __e, __l, 2);		\
-			break;						\
-		case 4:							\
-			__put_user_x(__r2, __p, __e, __l, 4);		\
-			break;						\
-		case 8:							\
-			__put_user_x(__r2, __p, __e, __l, 8);		\
-			break;						\
-		default: __e = __put_user_bad(); break;			\
-		}							\
-		__e;							\
+		__asm__ __volatile__ (					\
+			__asmeq("%0", "r0") __asmeq("%2", "r2")		\
+			__asmeq("%3", "r1")				\
+			"bl	__put_user_" #__s			\
+			: "=&r" (__e)					\
+			: "0" (__p), "r" (__r2), "r" (__l)		\
+			: "ip", "lr", "cc");				\
+		__err = __e;						\
 	})
 
-#define put_user(x, p)							\
-	({								\
-		might_fault();						\
-		__put_user_check(x, p);					\
-	 })
-
 #else /* CONFIG_MMU */
 
 /*
@@ -265,7 +264,7 @@ static inline void set_fs(mm_segment_t fs)
 }
 
 #define get_user(x, p)	__get_user(x, p)
-#define put_user(x, p)	__put_user(x, p)
+#define __put_user_check __put_user_nocheck
 
 #endif /* CONFIG_MMU */
 
@@ -300,20 +299,23 @@ static inline void set_fs(mm_segment_t fs)
 do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
+	unsigned int __ua_flags;					\
 	__chk_user_ptr(ptr);						\
 	might_fault();							\
+	__ua_flags = uaccess_save_and_enable();				\
 	switch (sizeof(*(ptr))) {					\
 	case 1:	__get_user_asm_byte(__gu_val, __gu_addr, err);	break;	\
 	case 2:	__get_user_asm_half(__gu_val, __gu_addr, err);	break;	\
 	case 4:	__get_user_asm_word(__gu_val, __gu_addr, err);	break;	\
 	default: (__gu_val) = __get_user_bad();				\
 	}								\
+	uaccess_restore(__ua_flags);					\
 	(x) = (__typeof__(*(ptr)))__gu_val;				\
 } while (0)
 
-#define __get_user_asm_byte(x, addr, err)			\
+#define __get_user_asm(x, addr, err, instr)			\
 	__asm__ __volatile__(					\
-	"1:	" TUSER(ldrb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(instr) " %1, [%2], #0\n"		\
 	"2:\n"							\
 	"	.pushsection .text.fixup,\"ax\"\n"		\
 	"	.align	2\n"					\
@@ -329,6 +331,9 @@ do {									\
 	: "r" (addr), "i" (-EFAULT)				\
 	: "cc")
 
+#define __get_user_asm_byte(x, addr, err)			\
+	__get_user_asm(x, addr, err, ldrb)
+
 #ifndef __ARMEB__
 #define __get_user_asm_half(x, __gu_addr, err)			\
 ({								\
@@ -348,54 +353,60 @@ do {									\
 #endif
 
 #define __get_user_asm_word(x, addr, err)			\
-	__asm__ __volatile__(					\
-	"1:	" TUSER(ldr) "	%1,[%2],#0\n"			\
-	"2:\n"							\
-	"	.pushsection .text.fixup,\"ax\"\n"		\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	mov	%1, #0\n"				\
-	"	b	2b\n"					\
-	"	.popsection\n"					\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.popsection"					\
-	: "+r" (err), "=&r" (x)					\
-	: "r" (addr), "i" (-EFAULT)				\
-	: "cc")
+	__get_user_asm(x, addr, err, ldr)
+
+
+#define __put_user_switch(x, ptr, __err, __fn)				\
+	do {								\
+		const __typeof__(*(ptr)) __user *__pu_ptr = (ptr);	\
+		__typeof__(*(ptr)) __pu_val = (x);			\
+		unsigned int __ua_flags;				\
+		might_fault();						\
+		__ua_flags = uaccess_save_and_enable();			\
+		switch (sizeof(*(ptr))) {				\
+		case 1: __fn(__pu_val, __pu_ptr, __err, 1); break;	\
+		case 2:	__fn(__pu_val, __pu_ptr, __err, 2); break;	\
+		case 4:	__fn(__pu_val, __pu_ptr, __err, 4); break;	\
+		case 8:	__fn(__pu_val, __pu_ptr, __err, 8); break;	\
+		default: __err = __put_user_bad(); break;		\
+		}							\
+		uaccess_restore(__ua_flags);				\
+	} while (0)
+
+#define put_user(x, ptr)						\
+({									\
+	int __pu_err = 0;						\
+	__put_user_switch((x), (ptr), __pu_err, __put_user_check);	\
+	__pu_err;							\
+})
 
 #define __put_user(x, ptr)						\
 ({									\
 	long __pu_err = 0;						\
-	__put_user_err((x), (ptr), __pu_err);				\
+	__put_user_switch((x), (ptr), __pu_err, __put_user_nocheck);	\
 	__pu_err;							\
 })
 
 #define __put_user_error(x, ptr, err)					\
 ({									\
-	__put_user_err((x), (ptr), err);				\
+	__put_user_switch((x), (ptr), (err), __put_user_nocheck);	\
 	(void) 0;							\
 })
 
-#define __put_user_err(x, ptr, err)					\
-do {									\
-	unsigned long __pu_addr = (unsigned long)(ptr);			\
-	__typeof__(*(ptr)) __pu_val = (x);				\
-	__chk_user_ptr(ptr);						\
-	might_fault();							\
-	switch (sizeof(*(ptr))) {					\
-	case 1: __put_user_asm_byte(__pu_val, __pu_addr, err);	break;	\
-	case 2: __put_user_asm_half(__pu_val, __pu_addr, err);	break;	\
-	case 4: __put_user_asm_word(__pu_val, __pu_addr, err);	break;	\
-	case 8:	__put_user_asm_dword(__pu_val, __pu_addr, err);	break;	\
-	default: __put_user_bad();					\
-	}								\
-} while (0)
+#define __put_user_nocheck(x, __pu_ptr, __err, __size)			\
+	do {								\
+		unsigned long __pu_addr = (unsigned long)__pu_ptr;	\
+		__put_user_nocheck_##__size(x, __pu_addr, __err);	\
+	} while (0)
 
-#define __put_user_asm_byte(x, __pu_addr, err)			\
+#define __put_user_nocheck_1 __put_user_asm_byte
+#define __put_user_nocheck_2 __put_user_asm_half
+#define __put_user_nocheck_4 __put_user_asm_word
+#define __put_user_nocheck_8 __put_user_asm_dword
+
+#define __put_user_asm(x, __pu_addr, err, instr)		\
 	__asm__ __volatile__(					\
-	"1:	" TUSER(strb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(instr) " %1, [%2], #0\n"		\
 	"2:\n"							\
 	"	.pushsection .text.fixup,\"ax\"\n"		\
 	"	.align	2\n"					\
@@ -410,6 +421,9 @@ do {									\
 	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
 	: "cc")
 
+#define __put_user_asm_byte(x, __pu_addr, err)			\
+	__put_user_asm(x, __pu_addr, err, strb)
+
 #ifndef __ARMEB__
 #define __put_user_asm_half(x, __pu_addr, err)			\
 ({								\
@@ -427,21 +441,7 @@ do {									\
 #endif
 
 #define __put_user_asm_word(x, __pu_addr, err)			\
-	__asm__ __volatile__(					\
-	"1:	" TUSER(str) "	%1,[%2],#0\n"			\
-	"2:\n"							\
-	"	.pushsection .text.fixup,\"ax\"\n"		\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	b	2b\n"					\
-	"	.popsection\n"					\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.popsection"					\
-	: "+r" (err)						\
-	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
-	: "cc")
+	__put_user_asm(x, __pu_addr, err, str)
 
 #ifndef __ARMEB__
 #define	__reg_oper0	"%R2"
@@ -474,11 +474,57 @@ do {									\
 
 
 #ifdef CONFIG_MMU
-extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
-extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
-extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n);
-extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
-extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
+extern unsigned long __must_check
+arm_copy_from_user(void *to, const void __user *from, unsigned long n);
+
+static inline unsigned long __must_check
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	unsigned int __ua_flags;
+
+	check_object_size(to, n, false);
+	__ua_flags = uaccess_save_and_enable();
+	n = arm_copy_from_user(to, from, n);
+	uaccess_restore(__ua_flags);
+	return n;
+}
+
+extern unsigned long __must_check
+arm_copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check
+__copy_to_user_std(void __user *to, const void *from, unsigned long n);
+
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+#ifndef CONFIG_UACCESS_WITH_MEMCPY
+	unsigned int __ua_flags;
+
+	check_object_size(from, n, true);
+	__ua_flags = uaccess_save_and_enable();
+	n = arm_copy_to_user(to, from, n);
+	uaccess_restore(__ua_flags);
+	return n;
+#else
+	check_object_size(from, n, true);
+	return arm_copy_to_user(to, from, n);
+#endif
+}
+
+extern unsigned long __must_check
+arm_clear_user(void __user *addr, unsigned long n);
+extern unsigned long __must_check
+__clear_user_std(void __user *addr, unsigned long n);
+
+static inline unsigned long __must_check
+__clear_user(void __user *addr, unsigned long n)
+{
+	unsigned int __ua_flags = uaccess_save_and_enable();
+	n = arm_clear_user(addr, n);
+	uaccess_restore(__ua_flags);
+	return n;
+}
+
 #else
 #define __copy_from_user(to, from, n)	(memcpy(to, (void __force *)from, n), 0)
 #define __copy_to_user(to, from, n)	(memcpy((void __force *)to, from, n), 0)
@@ -511,6 +557,7 @@ static inline unsigned long __must_check clear_user(void __user *to, unsigned lo
 	return n;
 }
 
+/* These are from lib/ code, and use __get_user() and friends */
 extern long strncpy_from_user(char *dest, const char __user *src, long count);
 
 extern __must_check long strlen_user(const char __user *str);
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 32640c431..194b69923 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -19,14 +19,7 @@
  * This may need to be greater than __NR_last_syscall+1 in order to
  * account for the padding in the syscall table
  */
-#define __NR_syscalls  (388)
-
-/*
- * *NOTE*: This is a ghost syscall private to the kernel.  Only the
- * __kuser_cmpxchg code in entry-armv.S should be aware of its
- * existence.  Don't ever use this from user code.
- */
-#define __ARM_NR_cmpxchg		(__ARM_NR_BASE+0x00fff0)
+#define __NR_syscalls  (396)
 
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_GETHOSTNAME
diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h
index 4371f45c5..a2e75b84e 100644
--- a/arch/arm/include/asm/virt.h
+++ b/arch/arm/include/asm/virt.h
@@ -74,6 +74,19 @@ static inline bool is_hyp_mode_mismatched(void)
 {
 	return !!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH);
 }
+
+static inline bool is_kernel_in_hyp_mode(void)
+{
+	return false;
+}
+
+/* The section containing the hypervisor idmap text */
+extern char __hyp_idmap_text_start[];
+extern char __hyp_idmap_text_end[];
+
+/* The section containing the hypervisor text */
+extern char __hyp_text_start[];
+extern char __hyp_text_end[];
 #endif
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h
index 8b1f37bfe..71e473d05 100644
--- a/arch/arm/include/asm/xen/events.h
+++ b/arch/arm/include/asm/xen/events.h
@@ -20,4 +20,10 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
 							    atomic64_t,	\
 							    counter), (val))
 
+/* Rebind event channel is supported by default */
+static inline bool xen_support_evtchn_rebind(void)
+{
+	return true;
+}
+
 #endif /* _ASM_ARM_XEN_EVENTS_H */
diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h
index 712b50e0a..9d874db13 100644
--- a/arch/arm/include/asm/xen/hypercall.h
+++ b/arch/arm/include/asm/xen/hypercall.h
@@ -33,8 +33,11 @@
 #ifndef _ASM_ARM_XEN_HYPERCALL_H
 #define _ASM_ARM_XEN_HYPERCALL_H
 
+#include <linux/bug.h>
+
 #include <xen/interface/xen.h>
 #include <xen/interface/sched.h>
+#include <xen/interface/platform.h>
 
 long privcmd_call(unsigned call, unsigned long a1,
 		unsigned long a2, unsigned long a3,
@@ -49,6 +52,13 @@ int HYPERVISOR_memory_op(unsigned int cmd, void *arg);
 int HYPERVISOR_physdev_op(int cmd, void *arg);
 int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args);
 int HYPERVISOR_tmem_op(void *arg);
+int HYPERVISOR_vm_assist(unsigned int cmd, unsigned int type);
+int HYPERVISOR_platform_op_raw(void *arg);
+static inline int HYPERVISOR_platform_op(struct xen_platform_op *op)
+{
+	op->interface_version = XENPF_INTERFACE_VERSION;
+	return HYPERVISOR_platform_op_raw(op);
+}
 int HYPERVISOR_multicall(struct multicall_entry *calls, uint32_t nr);
 
 static inline int
diff --git a/arch/arm/include/asm/xen/hypervisor.h b/arch/arm/include/asm/xen/hypervisor.h
index 04ff8e7b3..95251512e 100644
--- a/arch/arm/include/asm/xen/hypervisor.h
+++ b/arch/arm/include/asm/xen/hypervisor.h
@@ -26,4 +26,14 @@ void __init xen_early_init(void);
 static inline void xen_early_init(void) { return; }
 #endif
 
+#ifdef CONFIG_HOTPLUG_CPU
+static inline void xen_arch_register_cpu(int num)
+{
+}
+
+static inline void xen_arch_unregister_cpu(int num)
+{
+}
+#endif
+
 #endif /* _ASM_ARM_XEN_HYPERVISOR_H */
diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h
index 50066006e..75d596862 100644
--- a/arch/arm/include/asm/xen/interface.h
+++ b/arch/arm/include/asm/xen/interface.h
@@ -27,6 +27,8 @@
 		(hnd).p = val;				\
 	} while (0)
 
+#define __HYPERVISOR_platform_op_raw __HYPERVISOR_platform_op
+
 #ifndef __ASSEMBLY__
 /* Explicitly size integers that represent pfns in the interface with
  * Xen so that we can have one ABI that works for 32 and 64 bit guests.
@@ -76,6 +78,7 @@ struct pvclock_wall_clock {
 	u32   version;
 	u32   sec;
 	u32   nsec;
+	u32   sec_hi;
 } __attribute__((__packed__));
 #endif
 
diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h
index efd562412..95ce6ac3a 100644
--- a/arch/arm/include/asm/xen/page-coherent.h
+++ b/arch/arm/include/asm/xen/page-coherent.h
@@ -2,15 +2,14 @@
 #define _ASM_ARM_XEN_PAGE_COHERENT_H
 
 #include <asm/page.h>
-#include <linux/dma-attrs.h>
 #include <linux/dma-mapping.h>
 
 void __xen_dma_map_page(struct device *hwdev, struct page *page,
 	     dma_addr_t dev_addr, unsigned long offset, size_t size,
-	     enum dma_data_direction dir, struct dma_attrs *attrs);
+	     enum dma_data_direction dir, unsigned long attrs);
 void __xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir,
-		struct dma_attrs *attrs);
+		unsigned long attrs);
 void __xen_dma_sync_single_for_cpu(struct device *hwdev,
 		dma_addr_t handle, size_t size, enum dma_data_direction dir);
 
@@ -18,28 +17,37 @@ void __xen_dma_sync_single_for_device(struct device *hwdev,
 		dma_addr_t handle, size_t size, enum dma_data_direction dir);
 
 static inline void *xen_alloc_coherent_pages(struct device *hwdev, size_t size,
-		dma_addr_t *dma_handle, gfp_t flags,
-		struct dma_attrs *attrs)
+		dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs)
 {
 	return __generic_dma_ops(hwdev)->alloc(hwdev, size, dma_handle, flags, attrs);
 }
 
 static inline void xen_free_coherent_pages(struct device *hwdev, size_t size,
-		void *cpu_addr, dma_addr_t dma_handle,
-		struct dma_attrs *attrs)
+		void *cpu_addr, dma_addr_t dma_handle, unsigned long attrs)
 {
 	__generic_dma_ops(hwdev)->free(hwdev, size, cpu_addr, dma_handle, attrs);
 }
 
 static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
 	     dma_addr_t dev_addr, unsigned long offset, size_t size,
-	     enum dma_data_direction dir, struct dma_attrs *attrs)
+	     enum dma_data_direction dir, unsigned long attrs)
 {
-	bool local = PFN_DOWN(dev_addr) == page_to_pfn(page);
-	/* Dom0 is mapped 1:1, so if pfn == mfn the page is local otherwise
-	 * is a foreign page grant-mapped in dom0. If the page is local we
-	 * can safely call the native dma_ops function, otherwise we call
-	 * the xen specific function. */
+	unsigned long page_pfn = page_to_xen_pfn(page);
+	unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
+	unsigned long compound_pages =
+		(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
+	bool local = (page_pfn <= dev_pfn) &&
+		(dev_pfn - page_pfn < compound_pages);
+
+	/*
+	 * Dom0 is mapped 1:1, while the Linux page can span across
+	 * multiple Xen pages, it's not possible for it to contain a
+	 * mix of local and foreign Xen pages. So if the first xen_pfn
+	 * == mfn the page is local otherwise it's a foreign page
+	 * grant-mapped in dom0. If the page is local we can safely
+	 * call the native dma_ops function, otherwise we call the xen
+	 * specific function.
+	 */
 	if (local)
 		__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);
 	else
@@ -47,14 +55,17 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
 }
 
 static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir,
-		struct dma_attrs *attrs)
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
 	unsigned long pfn = PFN_DOWN(handle);
-	/* Dom0 is mapped 1:1, so calling pfn_valid on a foreign mfn will
-	 * always return false. If the page is local we can safely call the
-	 * native dma_ops function, otherwise we call the xen specific
-	 * function. */
+	/*
+	 * Dom0 is mapped 1:1, while the Linux page can be spanned accross
+	 * multiple Xen page, it's not possible to have a mix of local and
+	 * foreign Xen page. Dom0 is mapped 1:1, so calling pfn_valid on a
+	 * foreign mfn will always return false. If the page is local we can
+	 * safely call the native dma_ops function, otherwise we call the xen
+	 * specific function.
+	 */
 	if (pfn_valid(pfn)) {
 		if (__generic_dma_ops(hwdev)->unmap_page)
 			__generic_dma_ops(hwdev)->unmap_page(hwdev, handle, size, dir, attrs);
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
index 1bee8ca12..415dbc6e4 100644
--- a/arch/arm/include/asm/xen/page.h
+++ b/arch/arm/include/asm/xen/page.h
@@ -13,9 +13,6 @@
 
 #define phys_to_machine_mapping_valid(pfn) (1)
 
-#define pte_mfn	    pte_pfn
-#define mfn_pte	    pfn_pte
-
 /* Xen machine address */
 typedef struct xmaddr {
 	phys_addr_t maddr;
@@ -31,10 +28,33 @@ typedef struct xpaddr {
 
 #define INVALID_P2M_ENTRY      (~0UL)
 
+/*
+ * The pseudo-physical frame (pfn) used in all the helpers is always based
+ * on Xen page granularity (i.e 4KB).
+ *
+ * A Linux page may be split across multiple non-contiguous Xen page so we
+ * have to keep track with frame based on 4KB page granularity.
+ *
+ * PV drivers should never make a direct usage of those helpers (particularly
+ * pfn_to_gfn and gfn_to_pfn).
+ */
+
 unsigned long __pfn_to_mfn(unsigned long pfn);
 extern struct rb_root phys_to_mach;
 
-static inline unsigned long pfn_to_mfn(unsigned long pfn)
+/* Pseudo-physical <-> Guest conversion */
+static inline unsigned long pfn_to_gfn(unsigned long pfn)
+{
+	return pfn;
+}
+
+static inline unsigned long gfn_to_pfn(unsigned long gfn)
+{
+	return gfn;
+}
+
+/* Pseudo-physical <-> BUS conversion */
+static inline unsigned long pfn_to_bfn(unsigned long pfn)
 {
 	unsigned long mfn;
 
@@ -47,33 +67,21 @@ static inline unsigned long pfn_to_mfn(unsigned long pfn)
 	return pfn;
 }
 
-static inline unsigned long mfn_to_pfn(unsigned long mfn)
+static inline unsigned long bfn_to_pfn(unsigned long bfn)
 {
-	return mfn;
+	return bfn;
 }
 
-#define mfn_to_local_pfn(mfn) mfn_to_pfn(mfn)
-
-static inline xmaddr_t phys_to_machine(xpaddr_t phys)
-{
-	unsigned offset = phys.paddr & ~PAGE_MASK;
-	return XMADDR(PFN_PHYS(pfn_to_mfn(PFN_DOWN(phys.paddr))) | offset);
-}
+#define bfn_to_local_pfn(bfn)	bfn_to_pfn(bfn)
 
-static inline xpaddr_t machine_to_phys(xmaddr_t machine)
-{
-	unsigned offset = machine.maddr & ~PAGE_MASK;
-	return XPADDR(PFN_PHYS(mfn_to_pfn(PFN_DOWN(machine.maddr))) | offset);
-}
-/* VIRT <-> MACHINE conversion */
-#define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_mfn(v)		(pfn_to_mfn(virt_to_pfn(v)))
-#define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
+/* VIRT <-> GUEST conversion */
+#define virt_to_gfn(v)		(pfn_to_gfn(virt_to_phys(v) >> XEN_PAGE_SHIFT))
+#define gfn_to_virt(m)		(__va(gfn_to_pfn(m) << XEN_PAGE_SHIFT))
 
+/* Only used in PV code. But ARM guests are always HVM. */
 static inline xmaddr_t arbitrary_virt_to_machine(void *vaddr)
 {
-	/* TODO: assuming it is mapped in the kernel 1:1 */
-	return virt_to_machine(vaddr);
+	BUG();
 }
 
 /* TODO: this shouldn't be here but it is because the frontend drivers
@@ -107,8 +115,8 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 #define xen_unmap(cookie) iounmap((cookie))
 
 bool xen_arch_need_swiotlb(struct device *dev,
-			   unsigned long pfn,
-			   unsigned long mfn);
+			   phys_addr_t phys,
+			   dma_addr_t dev_addr);
 unsigned long xen_get_swiotlb_free_pages(unsigned int order);
 
 #endif /* _ASM_ARM_XEN_PAGE_H */
diff --git a/arch/arm/include/asm/xen/xen-ops.h b/arch/arm/include/asm/xen/xen-ops.h
new file mode 100644
index 000000000..ec154e719
--- /dev/null
+++ b/arch/arm/include/asm/xen/xen-ops.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_XEN_OPS_H
+#define _ASM_XEN_OPS_H
+
+void xen_efi_runtime_setup(void);
+
+#endif /* _ASM_XEN_OPS_H */
diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index c3c45e628..0098401e5 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -9,29 +9,14 @@
  *
 */
 
-#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
-#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */
-#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
-#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */
-#else
-/* On sama5d4, use USART3 as low level serial console */
-#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
-#endif
-
-#ifdef CONFIG_MMU
-#define AT91_IO_P2V(x) ((x) - 0x01000000)
-#else
-#define AT91_IO_P2V(x) (x)
-#endif
-
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
 #define AT91_DBGU_TXRDY		(1 << 1)	/* Transmitter Ready */
 #define AT91_DBGU_TXEMPTY	(1 << 9)	/* Transmitter Empty */
 
 	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =AT91_DBGU				@ System peripherals (phys address)
-	ldr	\rv, =AT91_IO_P2V(AT91_DBGU)		@ System peripherals (virt address)
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/include/debug/clps711x.S b/arch/arm/include/debug/clps711x.S
index abe225436..c17ac5c9e 100644
--- a/arch/arm/include/debug/clps711x.S
+++ b/arch/arm/include/debug/clps711x.S
@@ -9,10 +9,10 @@
 
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
 #define CLPS711X_UART_PADDR	(0x80000000 + 0x0000)
-#define CLPS711X_UART_VADDR	(0xfeff0000 + 0x0000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x0000)
 #else
 #define CLPS711X_UART_PADDR	(0x80000000 + 0x1000)
-#define CLPS711X_UART_VADDR	(0xfeff0000 + 0x1000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x1000)
 #endif
 
 #define SYSFLG		(0x0140)
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/include/debug/dc21285.S
index 02247f313..02247f313 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/dc21285.S
diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S
index b17fdb7fb..60bf3c232 100644
--- a/arch/arm/include/debug/exynos.S
+++ b/arch/arm/include/debug/exynos.S
@@ -24,7 +24,11 @@
 		mrc	p15, 0, \tmp, c0, c0, 0
 		and	\tmp, \tmp, #0xf0
 		teq	\tmp, #0xf0		@@ A15
-		ldreq	\rp, =EXYNOS5_PA_UART
+		beq	100f
+		mrc	p15, 0, \tmp, c0, c0, 5
+		and	\tmp, \tmp, #0xf00
+		teq	\tmp, #0x100		@@ A15 + A7 but boot to A7
+100:		ldreq	\rp, =EXYNOS5_PA_UART
 		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
 		ldr	\rv, =S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index 66f736f74..bce58e975 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -90,6 +90,17 @@
 #define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
 #define IMX6SX_UART_BASE(n)	IMX6SX_UART_BASE_ADDR(n)
 
+#define IMX6UL_UART1_BASE_ADDR	0x02020000
+#define IMX6UL_UART2_BASE_ADDR	0x021e8000
+#define IMX6UL_UART3_BASE_ADDR	0x021ec000
+#define IMX6UL_UART4_BASE_ADDR	0x021f0000
+#define IMX6UL_UART5_BASE_ADDR	0x021f4000
+#define IMX6UL_UART6_BASE_ADDR	0x021fc000
+#define IMX6UL_UART7_BASE_ADDR	0x02018000
+#define IMX6UL_UART8_BASE_ADDR	0x02024000
+#define IMX6UL_UART_BASE_ADDR(n) IMX6UL_UART##n##_BASE_ADDR
+#define IMX6UL_UART_BASE(n)	IMX6UL_UART_BASE_ADDR(n)
+
 #define IMX7D_UART1_BASE_ADDR	0x30860000
 #define IMX7D_UART2_BASE_ADDR	0x30890000
 #define IMX7D_UART3_BASE_ADDR	0x30880000
@@ -124,6 +135,8 @@
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SL)
 #elif defined(CONFIG_DEBUG_IMX6SX_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SX)
+#elif defined(CONFIG_DEBUG_IMX6UL_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6UL)
 #elif defined(CONFIG_DEBUG_IMX7D_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX7D)
 
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
index 619d8cc1a..92c44760d 100644
--- a/arch/arm/include/debug/imx.S
+++ b/arch/arm/include/debug/imx.S
@@ -11,6 +11,7 @@
  *
  */
 
+#include <asm/assembler.h>
 #include "imx-uart.h"
 
 /*
@@ -34,6 +35,7 @@
 		.endm
 
 		.macro	senduart,rd,rx
+		ARM_BE8(rev \rd, \rd)
 		str	\rd, [\rx, #0x40]	@ TXDATA
 		.endm
 
@@ -42,6 +44,7 @@
 
 		.macro	busyuart,rd,rx
 1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		ARM_BE8(rev \rd, \rd)
 		tst	\rd, #1 << 3		@ TXDC
 		beq	1002b			@ wait until transmit done
 		.endm
diff --git a/arch/arm/include/debug/palmchip.S b/arch/arm/include/debug/palmchip.S
new file mode 100644
index 000000000..6824b2d1c
--- /dev/null
+++ b/arch/arm/include/debug/palmchip.S
@@ -0,0 +1,11 @@
+#include <linux/serial_reg.h>
+
+#undef UART_TX
+#undef UART_LSR
+#undef UART_MSR
+
+#define UART_TX 1
+#define UART_LSR 7
+#define UART_MSR 8
+
+#include <debug/8250.S>
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
index 8d8d922e5..f4eeed2a1 100644
--- a/arch/arm/include/debug/samsung.S
+++ b/arch/arm/include/debug/samsung.S
@@ -15,11 +15,13 @@
 
 	.macro fifo_level_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
 	.endm
 
 	.macro  fifo_full_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S5PV210_UFSTAT_TXFULL
 	.endm
 
@@ -28,6 +30,7 @@
 
 	.macro fifo_level_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
@@ -37,6 +40,7 @@
 
 	.macro  fifo_full_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2440_UFSTAT_TXFULL
 	.endm
 
@@ -50,6 +54,7 @@
 
 	.macro	busyuart, rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -61,6 +66,7 @@
 1001:
 		@ busy waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
@@ -69,6 +75,7 @@
 
 	.macro	waituart,rd,rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -80,6 +87,7 @@
 1001:
 		@ idle waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S
index bd13dedbd..060cb5b49 100644
--- a/arch/arm/include/debug/zynq.S
+++ b/arch/arm/include/debug/zynq.S
@@ -20,9 +20,9 @@
 #define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
 
 #define UART0_PHYS		0xE0000000
-#define UART0_VIRT		0xF0000000
+#define UART0_VIRT		0xF0800000
 #define UART1_PHYS		0xE0001000
-#define UART1_VIRT		0xF0001000
+#define UART1_VIRT		0xF0801000
 
 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
 # define LL_UART_PADDR		UART1_PHYS
@@ -38,7 +38,7 @@
 		.endm
 
 		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_FIFO_OFFSET]	@ TXDATA
+		strb	\rd, [\rx, #UART_FIFO_OFFSET]	@ TXDATA
 		.endm
 
 		.macro	waituart,rd,rx
diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h
index df3f60cb1..a2b3eb313 100644
--- a/arch/arm/include/uapi/asm/kvm.h
+++ b/arch/arm/include/uapi/asm/kvm.h
@@ -139,8 +139,8 @@ struct kvm_arch_memory_slot {
 #define ARM_CP15_REG64(...) __ARM_CP15_REG64(__VA_ARGS__)
 
 #define KVM_REG_ARM_TIMER_CTL		ARM_CP15_REG32(0, 14, 3, 1)
-#define KVM_REG_ARM_TIMER_CNT		ARM_CP15_REG64(1, 14) 
-#define KVM_REG_ARM_TIMER_CVAL		ARM_CP15_REG64(3, 14) 
+#define KVM_REG_ARM_TIMER_CNT		ARM_CP15_REG64(1, 14)
+#define KVM_REG_ARM_TIMER_CVAL		ARM_CP15_REG64(3, 14)
 
 /* Normal registers are mapped as coprocessor 16. */
 #define KVM_REG_ARM_CORE		(0x0010 << KVM_REG_ARM_COPROC_SHIFT)
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index 0c3f5a0da..2cb9dc770 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -414,6 +414,12 @@
 #define __NR_memfd_create		(__NR_SYSCALL_BASE+385)
 #define __NR_bpf			(__NR_SYSCALL_BASE+386)
 #define __NR_execveat			(__NR_SYSCALL_BASE+387)
+#define __NR_userfaultfd		(__NR_SYSCALL_BASE+388)
+#define __NR_membarrier			(__NR_SYSCALL_BASE+389)
+#define __NR_mlock2			(__NR_SYSCALL_BASE+390)
+#define __NR_copy_file_range		(__NR_SYSCALL_BASE+391)
+#define __NR_preadv2			(__NR_SYSCALL_BASE+392)
+#define __NR_pwritev2			(__NR_SYSCALL_BASE+393)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index e69f7a197..ad325a8c7 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -71,26 +71,28 @@ obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
 obj-$(CONFIG_CPU_PJ4B)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o perf_callchain.o
-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o \
-				   perf_event_xscale.o perf_event_v6.o \
+obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_xscale.o perf_event_v6.o \
 				   perf_event_v7.o
-CFLAGS_pj4-cp0.o		:= -marm
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
 obj-$(CONFIG_VDSO)		+= vdso.o
+obj-$(CONFIG_EFI)		+= efi.o
 
 ifneq ($(CONFIG_ARCH_EBSA110),y)
   obj-y		+= io.o
 endif
+obj-$(CONFIG_PARAVIRT)	+= paravirt.o
 
 head-y			:= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-$(CONFIG_ARM_VIRT_EXT)	+= hyp-stub.o
+AFLAGS_hyp-stub.o		:=-Wa,-march=armv7-a
 ifeq ($(CONFIG_ARM_PSCI),y)
-obj-y				+= psci.o psci-call.o
 obj-$(CONFIG_SMP)		+= psci_smp.o
 endif
 
+obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
+
 extra-y := $(head-y) vmlinux.lds
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 5e5a51a99..7e45f69a0 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -16,6 +16,7 @@
 #include <linux/syscalls.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
+#include <linux/arm-smccc.h>
 
 #include <asm/checksum.h>
 #include <asm/ftrace.h>
@@ -97,9 +98,9 @@ EXPORT_SYMBOL(mmiocpy);
 #ifdef CONFIG_MMU
 EXPORT_SYMBOL(copy_page);
 
-EXPORT_SYMBOL(__copy_from_user);
-EXPORT_SYMBOL(__copy_to_user);
-EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(arm_copy_from_user);
+EXPORT_SYMBOL(arm_copy_to_user);
+EXPORT_SYMBOL(arm_clear_user);
 
 EXPORT_SYMBOL(__get_user_1);
 EXPORT_SYMBOL(__get_user_2);
@@ -175,3 +176,8 @@ EXPORT_SYMBOL(__gnu_mcount_nc);
 EXPORT_SYMBOL(__pv_phys_pfn_offset);
 EXPORT_SYMBOL(__pv_offset);
 #endif
+
+#ifdef CONFIG_HAVE_ARM_SMCCC
+EXPORT_SYMBOL(arm_smccc_smc);
+EXPORT_SYMBOL(arm_smccc_hvc);
+#endif
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 871b8267d..608008229 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -107,7 +107,10 @@ int main(void)
   DEFINE(S_PC,			offsetof(struct pt_regs, ARM_pc));
   DEFINE(S_PSR,			offsetof(struct pt_regs, ARM_cpsr));
   DEFINE(S_OLD_R0,		offsetof(struct pt_regs, ARM_ORIG_r0));
-  DEFINE(S_FRAME_SIZE,		sizeof(struct pt_regs));
+  DEFINE(PT_REGS_SIZE,		sizeof(struct pt_regs));
+  DEFINE(SVC_DACR,		offsetof(struct svc_pt_regs, dacr));
+  DEFINE(SVC_ADDR_LIMIT,	offsetof(struct svc_pt_regs, addr_limit));
+  DEFINE(SVC_REGS_SIZE,		sizeof(struct svc_pt_regs));
   BLANK();
 #ifdef CONFIG_CACHE_L2X0
   DEFINE(L2X0_R_PHY_BASE,	offsetof(struct l2x0_regs, phy_base));
@@ -170,41 +173,11 @@ int main(void)
   DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE);
   BLANK();
 #ifdef CONFIG_KVM_ARM_HOST
-  DEFINE(VCPU_KVM,		offsetof(struct kvm_vcpu, kvm));
-  DEFINE(VCPU_MIDR,		offsetof(struct kvm_vcpu, arch.midr));
-  DEFINE(VCPU_CP15,		offsetof(struct kvm_vcpu, arch.cp15));
-  DEFINE(VCPU_VFP_GUEST,	offsetof(struct kvm_vcpu, arch.vfp_guest));
-  DEFINE(VCPU_VFP_HOST,		offsetof(struct kvm_vcpu, arch.host_cpu_context));
-  DEFINE(VCPU_REGS,		offsetof(struct kvm_vcpu, arch.regs));
-  DEFINE(VCPU_USR_REGS,		offsetof(struct kvm_vcpu, arch.regs.usr_regs));
-  DEFINE(VCPU_SVC_REGS,		offsetof(struct kvm_vcpu, arch.regs.svc_regs));
-  DEFINE(VCPU_ABT_REGS,		offsetof(struct kvm_vcpu, arch.regs.abt_regs));
-  DEFINE(VCPU_UND_REGS,		offsetof(struct kvm_vcpu, arch.regs.und_regs));
-  DEFINE(VCPU_IRQ_REGS,		offsetof(struct kvm_vcpu, arch.regs.irq_regs));
-  DEFINE(VCPU_FIQ_REGS,		offsetof(struct kvm_vcpu, arch.regs.fiq_regs));
-  DEFINE(VCPU_PC,		offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc));
-  DEFINE(VCPU_CPSR,		offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr));
-  DEFINE(VCPU_HCR,		offsetof(struct kvm_vcpu, arch.hcr));
-  DEFINE(VCPU_IRQ_LINES,	offsetof(struct kvm_vcpu, arch.irq_lines));
-  DEFINE(VCPU_HSR,		offsetof(struct kvm_vcpu, arch.fault.hsr));
-  DEFINE(VCPU_HxFAR,		offsetof(struct kvm_vcpu, arch.fault.hxfar));
-  DEFINE(VCPU_HPFAR,		offsetof(struct kvm_vcpu, arch.fault.hpfar));
-  DEFINE(VCPU_HYP_PC,		offsetof(struct kvm_vcpu, arch.fault.hyp_pc));
-  DEFINE(VCPU_VGIC_CPU,		offsetof(struct kvm_vcpu, arch.vgic_cpu));
-  DEFINE(VGIC_V2_CPU_HCR,	offsetof(struct vgic_cpu, vgic_v2.vgic_hcr));
-  DEFINE(VGIC_V2_CPU_VMCR,	offsetof(struct vgic_cpu, vgic_v2.vgic_vmcr));
-  DEFINE(VGIC_V2_CPU_MISR,	offsetof(struct vgic_cpu, vgic_v2.vgic_misr));
-  DEFINE(VGIC_V2_CPU_EISR,	offsetof(struct vgic_cpu, vgic_v2.vgic_eisr));
-  DEFINE(VGIC_V2_CPU_ELRSR,	offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr));
-  DEFINE(VGIC_V2_CPU_APR,	offsetof(struct vgic_cpu, vgic_v2.vgic_apr));
-  DEFINE(VGIC_V2_CPU_LR,	offsetof(struct vgic_cpu, vgic_v2.vgic_lr));
-  DEFINE(VGIC_CPU_NR_LR,	offsetof(struct vgic_cpu, nr_lr));
-  DEFINE(VCPU_TIMER_CNTV_CTL,	offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl));
-  DEFINE(VCPU_TIMER_CNTV_CVAL,	offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_cval));
-  DEFINE(KVM_TIMER_CNTVOFF,	offsetof(struct kvm, arch.timer.cntvoff));
-  DEFINE(KVM_TIMER_ENABLED,	offsetof(struct kvm, arch.timer.enabled));
-  DEFINE(KVM_VGIC_VCTRL,	offsetof(struct kvm, arch.vgic.vctrl_base));
-  DEFINE(KVM_VTTBR,		offsetof(struct kvm, arch.vttbr));
+  DEFINE(VCPU_GUEST_CTXT,	offsetof(struct kvm_vcpu, arch.ctxt));
+  DEFINE(VCPU_HOST_CTXT,	offsetof(struct kvm_vcpu, arch.host_cpu_context));
+  DEFINE(CPU_CTXT_VFP,		offsetof(struct kvm_cpu_context, vfp));
+  DEFINE(CPU_CTXT_GP_REGS,	offsetof(struct kvm_cpu_context, gp_regs));
+  DEFINE(GP_REGS_USR,		offsetof(struct kvm_regs, usr_regs));
 #endif
   BLANK();
 #ifdef CONFIG_VDSO
diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h
index ec4164da6..edfa2268c 100644
--- a/arch/arm/kernel/atags.h
+++ b/arch/arm/kernel/atags.h
@@ -1,9 +1,3 @@
-#ifdef CONFIG_ATAGS_PROC
-extern void save_atags(struct tag *tags);
-#else
-static inline void save_atags(struct tag *tags) { }
-#endif
-
 void convert_to_tag_list(struct tag *tags);
 
 #ifdef CONFIG_ATAGS
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index fcbbbb1b9..2f0e07735 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -18,15 +18,6 @@
 
 static int debug_pci;
 
-#ifdef CONFIG_PCI_MSI
-struct msi_controller *pcibios_msi_controller(struct pci_dev *dev)
-{
-	struct pci_sys_data *sysdata = dev->bus->sysdata;
-
-	return sysdata->msi_ctrl;
-}
-#endif
-
 /*
  * We can't use pci_get_device() here since we are
  * called from interrupt context.
@@ -419,7 +410,8 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq;
 }
 
-static int pcibios_init_resources(int busnr, struct pci_sys_data *sys)
+static int pcibios_init_resource(int busnr, struct pci_sys_data *sys,
+				 int io_optional)
 {
 	int ret;
 	struct resource_entry *window;
@@ -429,6 +421,14 @@ static int pcibios_init_resources(int busnr, struct pci_sys_data *sys)
 			 &iomem_resource, sys->mem_offset);
 	}
 
+	/*
+	 * If a platform says I/O port support is optional, we don't add
+	 * the default I/O space.  The platform is responsible for adding
+	 * any I/O space it needs.
+	 */
+	if (io_optional)
+		return 0;
+
 	resource_list_for_each_entry(window, &sys->resources)
 		if (resource_type(window->res) == IORESOURCE_IO)
 			return 0;
@@ -459,16 +459,12 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 
 	for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
 		sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
-		if (!sys)
-			panic("PCI: unable to allocate sys data!");
+		if (WARN(!sys, "PCI: unable to allocate sys data!"))
+			break;
 
-#ifdef CONFIG_PCI_MSI
-		sys->msi_ctrl = hw->msi_ctrl;
-#endif
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;
 		sys->map_irq = hw->map_irq;
-		sys->align_resource = hw->align_resource;
 		INIT_LIST_HEAD(&sys->resources);
 
 		if (hw->private_data)
@@ -477,7 +473,9 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 		ret = hw->setup(nr, sys);
 
 		if (ret > 0) {
-			ret = pcibios_init_resources(nr, sys);
+			struct pci_host_bridge *host_bridge;
+
+			ret = pcibios_init_resource(nr, sys, hw->io_optional);
 			if (ret)  {
 				kfree(sys);
 				break;
@@ -486,15 +484,21 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 			if (hw->scan)
 				sys->bus = hw->scan(nr, sys);
 			else
-				sys->bus = pci_scan_root_bus(parent, sys->busnr,
-						hw->ops, sys, &sys->resources);
+				sys->bus = pci_scan_root_bus_msi(parent,
+					sys->busnr, hw->ops, sys,
+					&sys->resources, hw->msi_ctrl);
 
-			if (!sys->bus)
-				panic("PCI: unable to scan bus!");
+			if (WARN(!sys->bus, "PCI: unable to scan bus!")) {
+				kfree(sys);
+				break;
+			}
 
 			busnr = sys->bus->busn_res.end + 1;
 
 			list_add(&sys->node, head);
+
+			host_bridge = pci_find_host_bridge(sys->bus);
+			host_bridge->align_resource = hw->align_resource;
 		} else {
 			kfree(sys);
 			if (ret < 0)
@@ -520,34 +524,24 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
 	list_for_each_entry(sys, &head, node) {
 		struct pci_bus *bus = sys->bus;
 
-		if (!pci_has_flag(PCI_PROBE_ONLY)) {
-			/*
-			 * Size the bridge windows.
-			 */
-			pci_bus_size_bridges(bus);
-
-			/*
-			 * Assign resources.
-			 */
-			pci_bus_assign_resources(bus);
-		}
-
 		/*
-		 * Tell drivers about devices found.
+		 * We insert PCI resources into the iomem_resource and
+		 * ioport_resource trees in either pci_bus_claim_resources()
+		 * or pci_bus_assign_resources().
 		 */
-		pci_bus_add_devices(bus);
-	}
-
-	list_for_each_entry(sys, &head, node) {
-		struct pci_bus *bus = sys->bus;
-
-		/* Configure PCI Express settings */
-		if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
+		if (pci_has_flag(PCI_PROBE_ONLY)) {
+			pci_bus_claim_resources(bus);
+		} else {
 			struct pci_bus *child;
 
+			pci_bus_size_bridges(bus);
+			pci_bus_assign_resources(bus);
+
 			list_for_each_entry(child, &bus->children, node)
 				pcie_bus_configure_settings(child);
 		}
+
+		pci_bus_add_devices(bus);
 	}
 }
 
@@ -563,9 +557,6 @@ char * __init pcibios_setup(char *str)
 	if (!strcmp(str, "debug")) {
 		debug_pci = 1;
 		return NULL;
-	} else if (!strcmp(str, "firmware")) {
-		pci_add_flags(PCI_PROBE_ONLY);
-		return NULL;
 	}
 	return str;
 }
@@ -589,30 +580,21 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
-	struct pci_sys_data *sys = dev->sysdata;
 	resource_size_t start = res->start;
+	struct pci_host_bridge *host_bridge;
 
 	if (res->flags & IORESOURCE_IO && start & 0x300)
 		start = (start + 0x3ff) & ~0x3ff;
 
 	start = (start + align - 1) & ~(align - 1);
 
-	if (sys->align_resource)
-		return sys->align_resource(dev, res, start, size, align);
-
-	return start;
-}
+	host_bridge = pci_find_host_bridge(dev->bus);
 
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	if (pci_has_flag(PCI_PROBE_ONLY))
-		return 0;
+	if (host_bridge->align_resource)
+		return host_bridge->align_resource(dev, res,
+				start, size, align);
 
-	return pci_enable_resources(dev, mask);
+	return start;
 }
 
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 05745eb83..703fa0f3c 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -397,6 +397,12 @@
 /* 385 */	CALL(sys_memfd_create)
 		CALL(sys_bpf)
 		CALL(sys_execveat)
+		CALL(sys_userfaultfd)
+		CALL(sys_membarrier)
+/* 390 */	CALL(sys_mlock2)
+		CALL(sys_copy_file_range)
+		CALL(sys_preadv2)
+		CALL(sys_pwritev2)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
index 318da3346..7dccc964d 100644
--- a/arch/arm/kernel/cpuidle.c
+++ b/arch/arm/kernel/cpuidle.c
@@ -47,18 +47,13 @@ int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
  * This function calls the underlying arch specific low level PM code as
  * registered at the init time.
  *
- * Returns -EOPNOTSUPP if no suspend callback is defined, the result of the
- * callback otherwise.
+ * Returns the result of the suspend callback.
  */
 int arm_cpuidle_suspend(int index)
 {
-	int ret = -EOPNOTSUPP;
 	int cpu = smp_processor_id();
 
-	if (cpuidle_ops[cpu].suspend)
-		ret = cpuidle_ops[cpu].suspend(cpu, index);
-
-	return ret;
+	return cpuidle_ops[cpu].suspend(index);
 }
 
 /**
@@ -70,7 +65,7 @@ int arm_cpuidle_suspend(int index)
  *
  * Returns a struct cpuidle_ops pointer, NULL if not found.
  */
-static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method)
+static const struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method)
 {
 	struct of_cpuidle_method *m = __cpuidle_method_of_table;
 
@@ -88,16 +83,17 @@ static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method)
  *
  * Get the method name defined in the 'enable-method' property, retrieve the
  * associated cpuidle_ops and do a struct copy. This copy is needed because all
- * cpuidle_ops are tagged __initdata and will be unloaded after the init
+ * cpuidle_ops are tagged __initconst and will be unloaded after the init
  * process.
  *
  * Return 0 on sucess, -ENOENT if no 'enable-method' is defined, -EOPNOTSUPP if
- * no cpuidle_ops is registered for the 'enable-method'.
+ * no cpuidle_ops is registered for the 'enable-method', or if either init or
+ * suspend callback isn't defined.
  */
 static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu)
 {
 	const char *enable_method;
-	struct cpuidle_ops *ops;
+	const struct cpuidle_ops *ops;
 
 	enable_method = of_get_property(dn, "enable-method", NULL);
 	if (!enable_method)
@@ -110,6 +106,12 @@ static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu)
 		return -EOPNOTSUPP;
 	}
 
+	if (!ops->init || !ops->suspend) {
+		pr_warn("cpuidle_ops '%s': no init or suspend callback\n",
+			enable_method);
+		return -EOPNOTSUPP;
+	}
+
 	cpuidle_ops[cpu] = *ops; /* structure copy */
 
 	pr_notice("cpuidle: enable-method property '%s'"
@@ -129,7 +131,8 @@ static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu)
  * Returns:
  *  0 on success,
  *  -ENODEV if it fails to find the cpu node in the device tree,
- *  -EOPNOTSUPP if it does not find a registered cpuidle_ops for this cpu,
+ *  -EOPNOTSUPP if it does not find a registered and valid cpuidle_ops for
+ *  this cpu,
  *  -ENOENT if it fails to find an 'enable-method' property,
  *  -ENXIO if the HW reports a failure or a misconfiguration,
  *  -ENOMEM if the HW report an memory allocation failure 
@@ -143,7 +146,7 @@ int __init arm_cpuidle_init(int cpu)
 		return -ENODEV;
 
 	ret = arm_cpuidle_read_ops(cpu_node, cpu);
-	if (!ret && cpuidle_ops[cpu].init)
+	if (!ret)
 		ret = cpuidle_ops[cpu].init(cpu_node, cpu);
 
 	of_node_put(cpu_node);
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 11c54de9f..f676febbb 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -23,6 +23,7 @@
 #include <asm/cputype.h>
 #include <asm/setup.h>
 #include <asm/page.h>
+#include <asm/prom.h>
 #include <asm/smp_plat.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -87,6 +88,8 @@ void __init arm_dt_init_cpu_maps(void)
 		return;
 
 	for_each_child_of_node(cpus, cpu) {
+		const __be32 *cell;
+		int prop_bytes;
 		u32 hwid;
 
 		if (of_node_cmp(cpu->type, "cpu"))
@@ -98,18 +101,27 @@ void __init arm_dt_init_cpu_maps(void)
 		 * properties is considered invalid to build the
 		 * cpu_logical_map.
 		 */
-		if (of_property_read_u32(cpu, "reg", &hwid)) {
+		cell = of_get_property(cpu, "reg", &prop_bytes);
+		if (!cell || prop_bytes < sizeof(*cell)) {
 			pr_debug(" * %s missing reg property\n",
 				     cpu->full_name);
+			of_node_put(cpu);
 			return;
 		}
 
 		/*
-		 * 8 MSBs must be set to 0 in the DT since the reg property
+		 * Bits n:24 must be set to 0 in the DT since the reg property
 		 * defines the MPIDR[23:0].
 		 */
-		if (hwid & ~MPIDR_HWID_BITMASK)
+		do {
+			hwid = be32_to_cpu(*cell++);
+			prop_bytes -= sizeof(*cell);
+		} while (!hwid && prop_bytes > 0);
+
+		if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) {
+			of_node_put(cpu);
 			return;
+		}
 
 		/*
 		 * Duplicate MPIDRs are a recipe for disaster.
@@ -119,9 +131,11 @@ void __init arm_dt_init_cpu_maps(void)
 		 * to avoid matching valid MPIDR[23:0] values.
 		 */
 		for (j = 0; j < cpuidx; j++)
-			if (WARN(tmp_map[j] == hwid, "Duplicate /cpu reg "
-						     "properties in the DT\n"))
+			if (WARN(tmp_map[j] == hwid,
+				 "Duplicate /cpu reg properties in the DT\n")) {
+				of_node_put(cpu);
 				return;
+			}
 
 		/*
 		 * Build a stashed array of MPIDR values. Numbering scheme
@@ -143,6 +157,7 @@ void __init arm_dt_init_cpu_maps(void)
 					       "max cores %u, capping them\n",
 					       cpuidx, nr_cpu_ids)) {
 			cpuidx = nr_cpu_ids;
+			of_node_put(cpu);
 			break;
 		}
 
@@ -205,8 +220,10 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 
-#ifdef CONFIG_ARCH_MULTIPLATFORM
+#if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M)
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
+		.l2c_aux_val = 0x0,
+		.l2c_aux_mask = ~0x0,
 	MACHINE_END
 
 	mdesc_best = &__mach_desc_GENERIC_DT;
diff --git a/arch/arm/kernel/efi.c b/arch/arm/kernel/efi.c
new file mode 100644
index 000000000..9f43ba012
--- /dev/null
+++ b/arch/arm/kernel/efi.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+#include <asm/mach/map.h>
+#include <asm/mmu_context.h>
+
+static int __init set_permissions(pte_t *ptep, pgtable_t token,
+				  unsigned long addr, void *data)
+{
+	efi_memory_desc_t *md = data;
+	pte_t pte = *ptep;
+
+	if (md->attribute & EFI_MEMORY_RO)
+		pte = set_pte_bit(pte, __pgprot(L_PTE_RDONLY));
+	if (md->attribute & EFI_MEMORY_XP)
+		pte = set_pte_bit(pte, __pgprot(L_PTE_XN));
+	set_pte_ext(ptep, pte, PTE_EXT_NG);
+	return 0;
+}
+
+int __init efi_set_mapping_permissions(struct mm_struct *mm,
+				       efi_memory_desc_t *md)
+{
+	unsigned long base, size;
+
+	base = md->virt_addr;
+	size = md->num_pages << EFI_PAGE_SHIFT;
+
+	/*
+	 * We can only use apply_to_page_range() if we can guarantee that the
+	 * entire region was mapped using pages. This should be the case if the
+	 * region does not cover any naturally aligned SECTION_SIZE sized
+	 * blocks.
+	 */
+	if (round_down(base + size, SECTION_SIZE) <
+	    round_up(base, SECTION_SIZE) + SECTION_SIZE)
+		return apply_to_page_range(mm, base, size, set_permissions, md);
+
+	return 0;
+}
+
+int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
+{
+	struct map_desc desc = {
+		.virtual	= md->virt_addr,
+		.pfn		= __phys_to_pfn(md->phys_addr),
+		.length		= md->num_pages * EFI_PAGE_SIZE,
+	};
+
+	/*
+	 * Order is important here: memory regions may have all of the
+	 * bits below set (and usually do), so we check them in order of
+	 * preference.
+	 */
+	if (md->attribute & EFI_MEMORY_WB)
+		desc.type = MT_MEMORY_RWX;
+	else if (md->attribute & EFI_MEMORY_WT)
+		desc.type = MT_MEMORY_RWX_NONCACHED;
+	else if (md->attribute & EFI_MEMORY_WC)
+		desc.type = MT_DEVICE_WC;
+	else
+		desc.type = MT_DEVICE;
+
+	create_mapping_late(mm, &desc, true);
+
+	/*
+	 * If stricter permissions were specified, apply them now.
+	 */
+	if (md->attribute & (EFI_MEMORY_RO | EFI_MEMORY_XP))
+		return efi_set_mapping_permissions(mm, md);
+	return 0;
+}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index cb4fb1e69..9f157e7c5 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -92,7 +92,7 @@
  * Invalid mode handlers
  */
 	.macro	inv_entry, reason
-	sub	sp, sp, #S_FRAME_SIZE
+	sub	sp, sp, #PT_REGS_SIZE
  ARM(	stmib	sp, {r1 - lr}		)
  THUMB(	stmia	sp, {r0 - r12}		)
  THUMB(	str	sp, [sp, #S_SP]		)
@@ -149,10 +149,10 @@ ENDPROC(__und_invalid)
 #define SPFIX(code...)
 #endif
 
-	.macro	svc_entry, stack_hole=0, trace=1
+	.macro	svc_entry, stack_hole=0, trace=1, uaccess=1
  UNWIND(.fnstart		)
  UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+	sub	sp, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
 #ifdef CONFIG_THUMB2_KERNEL
  SPFIX(	str	r0, [sp]	)	@ temporarily saved
  SPFIX(	mov	r0, sp		)
@@ -167,7 +167,7 @@ ENDPROC(__und_invalid)
 	ldmia	r0, {r3 - r5}
 	add	r7, sp, #S_SP - 4	@ here for interlock avoidance
 	mov	r6, #-1			@  ""  ""      ""       ""
-	add	r2, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+	add	r2, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
  SPFIX(	addeq	r2, r2, #4	)
 	str	r3, [sp, #-4]!		@ save the "real" r0 copied
 					@ from the exception stack
@@ -185,6 +185,17 @@ ENDPROC(__und_invalid)
 	@
 	stmia	r7, {r2 - r6}
 
+	get_thread_info tsk
+	ldr	r0, [tsk, #TI_ADDR_LIMIT]
+	mov	r1, #TASK_SIZE
+	str	r1, [tsk, #TI_ADDR_LIMIT]
+	str	r0, [sp, #SVC_ADDR_LIMIT]
+
+	uaccess_save r0
+	.if \uaccess
+	uaccess_disable r0
+	.endif
+
 	.if \trace
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
@@ -194,7 +205,7 @@ ENDPROC(__und_invalid)
 
 	.align	5
 __dabt_svc:
-	svc_entry
+	svc_entry uaccess=0
 	mov	r2, sp
 	dabt_helper
  THUMB(	ldr	r5, [sp, #S_PSR]	)	@ potentially updated CPSR
@@ -208,7 +219,6 @@ __irq_svc:
 	irq_handler
 
 #ifdef CONFIG_PREEMPT
-	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
 	ldr	r0, [tsk, #TI_FLAGS]		@ get flags
 	teq	r8, #0				@ if preempt count != 0
@@ -285,6 +295,7 @@ __und_svc_fault:
 	bl	__und_fault
 
 __und_svc_finish:
+	get_thread_info tsk
 	ldr	r5, [sp, #S_PSR]		@ Get SVC cpsr
 	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
@@ -361,17 +372,17 @@ ENDPROC(__fiq_abt)
 /*
  * User mode handlers
  *
- * EABI note: sp_svc is always 64-bit aligned here, so should S_FRAME_SIZE
+ * EABI note: sp_svc is always 64-bit aligned here, so should PT_REGS_SIZE
  */
 
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (S_FRAME_SIZE & 7)
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (PT_REGS_SIZE & 7)
 #error "sizeof(struct pt_regs) must be a multiple of 8"
 #endif
 
-	.macro	usr_entry, trace=1
+	.macro	usr_entry, trace=1, uaccess=1
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)	@ don't unwind the user space
-	sub	sp, sp, #S_FRAME_SIZE
+	sub	sp, sp, #PT_REGS_SIZE
  ARM(	stmib	sp, {r1 - r12}	)
  THUMB(	stmia	sp, {r0 - r12}	)
 
@@ -400,6 +411,10 @@ ENDPROC(__fiq_abt)
  ARM(	stmdb	r0, {sp, lr}^			)
  THUMB(	store_user_sp_lr r0, r1, S_SP - S_PC	)
 
+	.if \uaccess
+	uaccess_disable ip
+	.endif
+
 	@ Enable the alignment trap while in kernel mode
  ATRAP(	teq	r8, r7)
  ATRAP( mcrne	p15, 0, r8, c1, c0, 0)
@@ -418,8 +433,7 @@ ENDPROC(__fiq_abt)
 	.endm
 
 	.macro	kuser_cmpxchg_check
-#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \
-    !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS)
 #ifndef CONFIG_MMU
 #warning "NPTL on non MMU needs fixing"
 #else
@@ -435,7 +449,7 @@ ENDPROC(__fiq_abt)
 
 	.align	5
 __dabt_usr:
-	usr_entry
+	usr_entry uaccess=0
 	kuser_cmpxchg_check
 	mov	r2, sp
 	dabt_helper
@@ -458,7 +472,7 @@ ENDPROC(__irq_usr)
 
 	.align	5
 __und_usr:
-	usr_entry
+	usr_entry uaccess=0
 
 	mov	r2, r4
 	mov	r3, r5
@@ -484,6 +498,8 @@ __und_usr:
 1:	ldrt	r0, [r4]
  ARM_BE8(rev	r0, r0)				@ little endian instruction
 
+	uaccess_disable ip
+
 	@ r0 = 32-bit ARM instruction which caused the exception
 	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
 	@ r4 = PC value for the faulting instruction
@@ -518,9 +534,10 @@ __und_usr_thumb:
 2:	ldrht	r5, [r4]
 ARM_BE8(rev16	r5, r5)				@ little endian instruction
 	cmp	r5, #0xe800			@ 32bit instruction if xx != 0
-	blo	__und_usr_fault_16		@ 16bit undefined instruction
+	blo	__und_usr_fault_16_pan		@ 16bit undefined instruction
 3:	ldrht	r0, [r2]
 ARM_BE8(rev16	r0, r0)				@ little endian instruction
+	uaccess_disable ip
 	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
 	str	r2, [sp, #S_PC]			@ it's a 2x16bit instr, update
 	orr	r0, r0, r5, lsl #16
@@ -715,6 +732,8 @@ ENDPROC(no_fp)
 __und_usr_fault_32:
 	mov	r1, #4
 	b	1f
+__und_usr_fault_16_pan:
+	uaccess_disable ip
 __und_usr_fault_16:
 	mov	r1, #2
 1:	mov	r0, sp
@@ -770,6 +789,8 @@ ENTRY(__switch_to)
 	ldr	r4, [r2, #TI_TP_VALUE]
 	ldr	r5, [r2, #TI_TP_VALUE + 4]
 #ifdef CONFIG_CPU_USE_DOMAINS
+	mrc	p15, 0, r6, c3, c0, 0		@ Get domain register
+	str	r6, [r1, #TI_CPU_DOMAIN]	@ Save old domain register
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
 	switch_tls r1, r4, r5, r3, r7
@@ -843,20 +864,7 @@ __kuser_helper_start:
 
 __kuser_cmpxchg64:				@ 0xffff0f60
 
-#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-
-	/*
-	 * Poor you.  No fast solution possible...
-	 * The kernel itself must perform the operation.
-	 * A special ghost syscall is used for that (see traps.c).
-	 */
-	stmfd	sp!, {r7, lr}
-	ldr	r7, 1f			@ it's 20 bits
-	swi	__ARM_NR_cmpxchg64
-	ldmfd	sp!, {r7, pc}
-1:	.word	__ARM_NR_cmpxchg64
-
-#elif defined(CONFIG_CPU_32v6K)
+#if defined(CONFIG_CPU_32v6K)
 
 	stmfd	sp!, {r4, r5, r6, r7}
 	ldrd	r4, r5, [r0]			@ load old val
@@ -932,20 +940,7 @@ __kuser_memory_barrier:				@ 0xffff0fa0
 
 __kuser_cmpxchg:				@ 0xffff0fc0
 
-#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-
-	/*
-	 * Poor you.  No fast solution possible...
-	 * The kernel itself must perform the operation.
-	 * A special ghost syscall is used for that (see traps.c).
-	 */
-	stmfd	sp!, {r7, lr}
-	ldr	r7, 1f			@ it's 20 bits
-	swi	__ARM_NR_cmpxchg
-	ldmfd	sp!, {r7, pc}
-1:	.word	__ARM_NR_cmpxchg
-
-#elif __LINUX_ARM_ARCH__ < 6
+#if __LINUX_ARM_ARCH__ < 6
 
 #ifdef CONFIG_MMU
 
@@ -1075,7 +1070,6 @@ ENDPROC(vector_\name)
 	.endm
 
 	.section .stubs, "ax", %progbits
-__stubs_start:
 	@ This must be the first word
 	.word	vector_swi
 
@@ -1213,14 +1207,13 @@ vector_addrexcptn:
 	.long	__fiq_svc			@  e
 	.long	__fiq_svc			@  f
 
-	.globl	vector_fiq_offset
-	.equ	vector_fiq_offset, vector_fiq
+	.globl	vector_fiq
 
 	.section .vectors, "ax", %progbits
-__vectors_start:
+.L__vectors_start:
 	W(b)	vector_rst
 	W(b)	vector_und
-	W(ldr)	pc, __vectors_start + 0x1000
+	W(ldr)	pc, .L__vectors_start + 0x1000
 	W(b)	vector_pabt
 	W(b)	vector_dabt
 	W(b)	vector_addrexcptn
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index b48dd4f37..10c3283d6 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -24,35 +24,55 @@
 
 
 	.align	5
+#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING))
 /*
- * This is the fast syscall return path.  We do as little as
- * possible here, and this includes saving r0 back into the SVC
- * stack.
+ * This is the fast syscall return path.  We do as little as possible here,
+ * such as avoiding writing r0 to the stack.  We only use this path if we
+ * have tracing and context tracking disabled - the overheads from those
+ * features make this path too inefficient.
  */
 ret_fast_syscall:
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)
-	disable_irq				@ disable interrupts
+	disable_irq_notrace			@ disable interrupts
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
-	tst	r1, #_TIF_SYSCALL_WORK
-	bne	__sys_trace_return
-	tst	r1, #_TIF_WORK_MASK
+	tst	r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
 	bne	fast_work_pending
-	asm_trace_hardirqs_on
 
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
-	ct_user_enter
 
 	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
+ENDPROC(ret_fast_syscall)
 
-/*
- * Ok, we need to do extra processing, enter the slow path.
- */
+	/* Ok, we need to do extra processing, enter the slow path. */
 fast_work_pending:
 	str	r0, [sp, #S_R0+S_OFF]!		@ returned r0
-work_pending:
+	/* fall through to work_pending */
+#else
+/*
+ * The "replacement" ret_fast_syscall for when tracing or context tracking
+ * is enabled.  As we will need to call out to some C functions, we save
+ * r0 first to avoid needing to save registers around each C function call.
+ */
+ret_fast_syscall:
+ UNWIND(.fnstart	)
+ UNWIND(.cantunwind	)
+	str	r0, [sp, #S_R0 + S_OFF]!	@ save returned r0
+	disable_irq_notrace			@ disable interrupts
+	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
+	tst	r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
+	beq	no_work_pending
+ UNWIND(.fnend		)
+ENDPROC(ret_fast_syscall)
+
+	/* Slower path - fall through to work_pending */
+#endif
+
+	tst	r1, #_TIF_SYSCALL_WORK
+	bne	__sys_trace_return_nosave
+slow_work_pending:
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
 	bl	do_work_pending
@@ -65,16 +85,19 @@ ENDPROC(ret_fast_syscall)
 
 /*
  * "slow" syscall return path.  "why" tells us if this was a real syscall.
+ * IRQs may be enabled here, so always disable them.  Note that we use the
+ * "notrace" version to avoid calling into the tracing code unnecessarily.
+ * do_work_pending() will update this state if necessary.
  */
 ENTRY(ret_to_user)
 ret_slow_syscall:
-	disable_irq				@ disable interrupts
+	disable_irq_notrace			@ disable interrupts
 ENTRY(ret_to_user_from_irq)
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK
-	bne	work_pending
+	bne	slow_work_pending
 no_work_pending:
-	asm_trace_hardirqs_on
+	asm_trace_hardirqs_on save = 0
 
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
@@ -122,7 +145,7 @@ ENTRY(vector_swi)
 #ifdef CONFIG_CPU_V7M
 	v7m_exception_entry
 #else
-	sub	sp, sp, #S_FRAME_SIZE
+	sub	sp, sp, #PT_REGS_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
  ARM(	add	r8, sp, #S_PC		)
  ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
@@ -174,6 +197,8 @@ ENTRY(vector_swi)
  USER(	ldr	scno, [lr, #-4]		)	@ get SWI instruction
 #endif
 
+	uaccess_disable tbl
+
 	adr	tbl, sys_call_table		@ load syscall table pointer
 
 #if defined(CONFIG_OABI_COMPAT)
@@ -252,6 +277,12 @@ __sys_trace_return:
 	bl	syscall_trace_exit
 	b	ret_slow_syscall
 
+__sys_trace_return_nosave:
+	enable_irq_notrace
+	mov	r0, sp
+	bl	syscall_trace_exit
+	b	ret_slow_syscall
+
 	.align	5
 #ifdef CONFIG_ALIGNMENT_TRAP
 	.type	__cr_alignment, #object
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 1a0045abe..6391728c8 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -90,7 +90,7 @@
 	@ Linux expects to have irqs off. Do it here before taking stack space
 	cpsid	i
 
-	sub	sp, #S_FRAME_SIZE-S_IP
+	sub	sp, #PT_REGS_SIZE-S_IP
 	stmdb	sp!, {r0-r11}
 
 	@ load saved r12, lr, return address and xPSR.
@@ -160,7 +160,7 @@
 	ldmia	sp!, {r0-r11}
 
 	@ restore main sp
-	add	sp, sp, #S_FRAME_SIZE-S_IP
+	add	sp, sp, #PT_REGS_SIZE-S_IP
 
 	cpsie	i
 	bx	lr
@@ -196,7 +196,7 @@
 	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
 	.endm
 
-#ifndef CONFIG_THUMB2_KERNEL
+
 	.macro	svc_exit, rpsr, irq = 0
 	.if	\irq != 0
 	@ IRQs already off
@@ -215,6 +215,12 @@
 	blne	trace_hardirqs_off
 #endif
 	.endif
+	ldr	r1, [sp, #SVC_ADDR_LIMIT]
+	uaccess_restore
+	str	r1, [tsk, #TI_ADDR_LIMIT]
+
+#ifndef CONFIG_THUMB2_KERNEL
+	@ ARM mode SVC restore
 	msr	spsr_cxsf, \rpsr
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
 	@ We must avoid clrex due to Cortex-A15 erratum #830321
@@ -222,6 +228,20 @@
 	strex	r1, r2, [r0]			@ clear the exclusive monitor
 #endif
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#else
+	@ Thumb mode SVC restore
+	ldr	lr, [sp, #S_SP]			@ top of the stack
+	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r2, r1, [sp, #S_LR]		@ clear the exclusive monitor
+
+	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
+	ldmia	sp, {r0 - r12}
+	mov	sp, lr
+	ldr	lr, [sp], #4
+	rfeia	sp!
+#endif
 	.endm
 
 	@
@@ -241,6 +261,11 @@
 	@ on the stack remains correct).
 	@
 	.macro  svc_exit_via_fiq
+	ldr	r1, [sp, #SVC_ADDR_LIMIT]
+	uaccess_restore
+	str	r1, [tsk, #TI_ADDR_LIMIT]
+#ifndef CONFIG_THUMB2_KERNEL
+	@ ARM mode restore
 	mov	r0, sp
 	ldmib	r0, {r1 - r14}	@ abort is deadly from here onward (it will
 				@ clobber state restored below)
@@ -250,9 +275,27 @@
 	msr	spsr_cxsf, r9
 	ldr	r0, [r0, #S_R0]
 	ldmia	r8, {pc}^
+#else
+	@ Thumb mode restore
+	add	r0, sp, #S_R2
+	ldr	lr, [sp, #S_LR]
+	ldr	sp, [sp, #S_SP] @ abort is deadly from here onward (it will
+			        @ clobber state restored below)
+	ldmia	r0, {r2 - r12}
+	mov	r1, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT
+	msr	cpsr_c, r1
+	sub	r0, #S_R2
+	add	r8, r0, #S_PC
+	ldmia	r0, {r0 - r1}
+	rfeia	r8
+#endif
 	.endm
 
+
 	.macro	restore_user_regs, fast = 0, offset = 0
+	uaccess_enable r1, isb=0
+#ifndef CONFIG_THUMB2_KERNEL
+	@ ARM mode restore
 	mov	r2, sp
 	ldr	r1, [r2, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [r2, #\offset + S_PC]!	@ get pc
@@ -268,74 +311,18 @@
 	.endif
 	mov	r0, r0				@ ARMv5T and earlier require a nop
 						@ after ldm {}^
-	add	sp, sp, #\offset + S_FRAME_SIZE
+	add	sp, sp, #\offset + PT_REGS_SIZE
 	movs	pc, lr				@ return & move spsr_svc into cpsr
-	.endm
-
-#else	/* CONFIG_THUMB2_KERNEL */
-	.macro	svc_exit, rpsr, irq = 0
-	.if	\irq != 0
-	@ IRQs already off
-#ifdef CONFIG_TRACE_IRQFLAGS
-	@ The parent context IRQs must have been enabled to get here in
-	@ the first place, so there's no point checking the PSR I bit.
-	bl	trace_hardirqs_on
-#endif
-	.else
-	@ IRQs off again before pulling preserved data off the stack
-	disable_irq_notrace
-#ifdef CONFIG_TRACE_IRQFLAGS
-	tst	\rpsr, #PSR_I_BIT
-	bleq	trace_hardirqs_on
-	tst	\rpsr, #PSR_I_BIT
-	blne	trace_hardirqs_off
-#endif
-	.endif
-	ldr	lr, [sp, #S_SP]			@ top of the stack
-	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
-
-	@ We must avoid clrex due to Cortex-A15 erratum #830321
-	strex	r2, r1, [sp, #S_LR]		@ clear the exclusive monitor
-
-	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
-	ldmia	sp, {r0 - r12}
-	mov	sp, lr
-	ldr	lr, [sp], #4
-	rfeia	sp!
-	.endm
-
-	@
-	@ svc_exit_via_fiq - like svc_exit but switches to FIQ mode before exit
-	@
-	@ For full details see non-Thumb implementation above.
-	@
-	.macro  svc_exit_via_fiq
-	add	r0, sp, #S_R2
-	ldr	lr, [sp, #S_LR]
-	ldr	sp, [sp, #S_SP] @ abort is deadly from here onward (it will
-			        @ clobber state restored below)
-	ldmia	r0, {r2 - r12}
-	mov	r1, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT
-	msr	cpsr_c, r1
-	sub	r0, #S_R2
-	add	r8, r0, #S_PC
-	ldmia	r0, {r0 - r1}
-	rfeia	r8
-	.endm
-
-#ifdef CONFIG_CPU_V7M
-	/*
-	 * Note we don't need to do clrex here as clearing the local monitor is
-	 * part of each exception entry and exit sequence.
-	 */
-	.macro	restore_user_regs, fast = 0, offset = 0
+#elif defined(CONFIG_CPU_V7M)
+	@ V7M restore.
+	@ Note that we don't need to do clrex here as clearing the local
+	@ monitor is part of the exception entry and exit sequence.
 	.if	\offset
 	add	sp, #\offset
 	.endif
 	v7m_exception_slow_exit ret_r0 = \fast
-	.endm
-#else	/* ifdef CONFIG_CPU_V7M */
-	.macro	restore_user_regs, fast = 0, offset = 0
+#else
+	@ Thumb mode restore
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
@@ -351,11 +338,10 @@
 	.else
 	ldmdb	sp, {r0 - r12}			@ get calling r0 - r12
 	.endif
-	add	sp, sp, #S_FRAME_SIZE - S_SP
+	add	sp, sp, #PT_REGS_SIZE - S_SP
 	movs	pc, lr				@ return & move spsr_svc into cpsr
-	.endm
-#endif	/* ifdef CONFIG_CPU_V7M / else */
 #endif	/* !CONFIG_THUMB2_KERNEL */
+	.endm
 
 /*
  * Context tracking subsystem.  Used to instrument transitions
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index b6c8bb931..abcf47848 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -73,7 +73,7 @@ __irq_entry:
 	@ correctness they don't need to be restored. So only r8-r11 must be
 	@ restored here. The easiest way to do so is to restore r0-r7, too.
 	ldmia	sp!, {r0-r11}
-	add	sp, #S_FRAME_SIZE-S_IP
+	add	sp, #PT_REGS_SIZE-S_IP
 	cpsie	i
 	bx	lr
 ENDPROC(__irq_entry)
@@ -88,7 +88,7 @@ __pendsv_entry:
 	@ execute the pending work, including reschedule
 	get_thread_info tsk
 	mov	why, #0
-	b	ret_to_user
+	b	ret_to_user_from_irq
 ENDPROC(__pendsv_entry)
 
 /*
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 9b8c5a113..fb1a69eb4 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -236,7 +236,7 @@ ENTRY(__setup_mpu)
 	mov	r0, #CONFIG_VECTORS_BASE	@ Cover from VECTORS_BASE
 	ldr	r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
 	/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
-	mov	r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
+	mov	r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
 
 	setup_region r0, r5, r6, MPU_DATA_SIDE	@ VECTORS_BASE, PL0 NA, enabled
 	beq	3f				@ Memory-map not unified
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 29e299146..04286fd9e 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -464,10 +464,7 @@ __enable_mmu:
 #ifdef CONFIG_ARM_LPAE
 	mcrr	p15, 0, r4, r5, c2		@ load TTBR0
 #else
-	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
+	mov	r5, #DACR_INIT
 	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 #endif
diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
index a71501ff6..b09561a6d 100644
--- a/arch/arm/kernel/hibernate.c
+++ b/arch/arm/kernel/hibernate.c
@@ -62,7 +62,7 @@ static int notrace arch_save_image(unsigned long unused)
 
 	ret = swsusp_save();
 	if (ret == 0)
-		_soft_restart(virt_to_phys(cpu_resume), false);
+		_soft_restart(virt_to_idmap(cpu_resume), false);
 	return ret;
 }
 
@@ -87,7 +87,7 @@ static void notrace arch_restore_image(void *unused)
 	for (pbe = restore_pblist; pbe; pbe = pbe->next)
 		copy_page(pbe->orig_address, pbe->address);
 
-	_soft_restart(virt_to_phys(cpu_resume), false);
+	_soft_restart(virt_to_idmap(cpu_resume), false);
 }
 
 static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata;
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index dc7d0a95b..b8df45883 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -35,7 +35,6 @@
 #include <asm/cputype.h>
 #include <asm/current.h>
 #include <asm/hw_breakpoint.h>
-#include <asm/kdebug.h>
 #include <asm/traps.h>
 
 /* Breakpoint currently in use for each BRP. */
@@ -632,7 +631,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	info->address &= ~alignment_mask;
 	info->ctrl.len <<= offset;
 
-	if (!bp->overflow_handler) {
+	if (is_default_overflow_handler(bp)) {
 		/*
 		 * Mismatch breakpoints are required for single-stepping
 		 * breakpoints.
@@ -755,7 +754,7 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 * mismatch breakpoint so we can single-step over the
 		 * watchpoint trigger.
 		 */
-		if (!wp->overflow_handler)
+		if (is_default_overflow_handler(wp))
 			enable_single_step(wp, instruction_pointer(regs));
 
 unlock:
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 2a55373f4..15d073ae5 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -17,6 +17,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/irqchip/arm-gic-v3.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/virt.h>
@@ -141,6 +142,19 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	and	r7, #0x1f		@ Preserve HPMN
 	mcr	p15, 4, r7, c1, c1, 1	@ HDCR
 
+	@ Make sure NS-SVC is initialised appropriately
+	mrc	p15, 0, r7, c1, c0, 0	@ SCTLR
+	orr	r7, #(1 << 5)		@ CP15 barriers enabled
+	bic	r7, #(3 << 7)		@ Clear SED/ITD for v8 (RES0 for v7)
+	bic	r7, #(3 << 19)		@ WXN and UWXN disabled
+	mcr	p15, 0, r7, c1, c0, 0	@ SCTLR
+
+	mrc	p15, 0, r7, c0, c0, 0	@ MIDR
+	mcr	p15, 4, r7, c0, c0, 0	@ VPIDR
+
+	mrc	p15, 0, r7, c0, c0, 5	@ MPIDR
+	mcr	p15, 4, r7, c0, c0, 5	@ VMPIDR
+
 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
@@ -161,6 +175,29 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 1:
 #endif
 
+#ifdef CONFIG_ARM_GIC_V3
+	@ Check whether GICv3 system registers are available
+	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
+	ubfx	r7, r7, #28, #4
+	cmp	r7, #1
+	bne	2f
+
+	@ Enable system register accesses
+	mrc	p15, 4, r7, c12, c9, 5	@ ICC_HSRE
+	orr	r7, r7, #(ICC_SRE_EL2_ENABLE | ICC_SRE_EL2_SRE)
+	mcr	p15, 4, r7, c12, c9, 5	@ ICC_HSRE
+	isb
+
+	@ SRE bit could be forced to 0 by firmware.
+	@ Check whether it sticks before accessing any other sysreg
+	mrc	p15, 4, r7, c12, c9, 5	@ ICC_HSRE
+	tst	r7, #ICC_SRE_EL2_SRE
+	beq	2f
+	mov	r7, #0
+	mcr	p15, 4, r7, c12, c11, 0	@ ICH_HCR
+2:
+#endif
+
 	bx	lr			@ The boot CPU mode is left in r4.
 ENDPROC(__hyp_stub_install_secondary)
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 350f188c9..ece04a457 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -39,6 +39,8 @@
 #include <linux/export.h>
 
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/outercache.h>
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -78,26 +80,6 @@ asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	handle_IRQ(irq, regs);
 }
 
-void set_irq_flags(unsigned int irq, unsigned int iflags)
-{
-	unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
-
-	if (irq >= nr_irqs) {
-		pr_err("Trying to set irq flags for IRQ%d\n", irq);
-		return;
-	}
-
-	if (iflags & IRQF_VALID)
-		clr |= IRQ_NOREQUEST;
-	if (iflags & IRQF_PROBE)
-		clr |= IRQ_NOPROBE;
-	if (!(iflags & IRQF_NOAUTOEN))
-		clr |= IRQ_NOAUTOEN;
-	/* Order is clear bits in "clr" then set bits in "set" */
-	irq_modify_status(irq, clr, set & ~clr);
-}
-EXPORT_SYMBOL_GPL(set_irq_flags);
-
 void __init init_IRQ(void)
 {
 	int ret;
@@ -113,9 +95,11 @@ void __init init_IRQ(void)
 			outer_cache.write_sec = machine_desc->l2c_write_sec;
 		ret = l2x0_of_init(machine_desc->l2c_aux_val,
 				   machine_desc->l2c_aux_mask);
-		if (ret)
+		if (ret && ret != -ENODEV)
 			pr_err("L2C: failed to init: %d\n", ret);
 	}
+
+	uniphier_cache_init();
 }
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER
@@ -140,7 +124,7 @@ int __init arch_probe_nr_irqs(void)
 static bool migrate_one_irq(struct irq_desc *desc)
 {
 	struct irq_data *d = irq_desc_get_irq_data(desc);
-	const struct cpumask *affinity = d->affinity;
+	const struct cpumask *affinity = irq_data_get_affinity_mask(d);
 	struct irq_chip *c;
 	bool ret = false;
 
@@ -160,7 +144,7 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
 	else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
-		cpumask_copy(d->affinity, affinity);
+		cpumask_copy(irq_data_get_affinity_mask(d), affinity);
 
 	return ret;
 }
diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c
index e39cbf488..845a5dd9c 100644
--- a/arch/arm/kernel/jump_label.c
+++ b/arch/arm/kernel/jump_label.c
@@ -12,7 +12,7 @@ static void __arch_jump_label_transform(struct jump_entry *entry,
 	void *addr = (void *)entry->code;
 	unsigned int insn;
 
-	if (type == JUMP_LABEL_ENABLE)
+	if (type == JUMP_LABEL_JMP)
 		insn = arm_gen_branch(entry->code, entry->target);
 	else
 		insn = arm_gen_nop();
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index a6ad93c9b..9232caee7 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -74,7 +74,7 @@ int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
 void
 sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
 {
-	struct pt_regs *thread_regs;
+	struct thread_info *ti;
 	int regno;
 
 	/* Just making sure... */
@@ -86,24 +86,17 @@ sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
 		gdb_regs[regno] = 0;
 
 	/* Otherwise, we have only some registers from switch_to() */
-	thread_regs		= task_pt_regs(task);
-	gdb_regs[_R0]		= thread_regs->ARM_r0;
-	gdb_regs[_R1]		= thread_regs->ARM_r1;
-	gdb_regs[_R2]		= thread_regs->ARM_r2;
-	gdb_regs[_R3]		= thread_regs->ARM_r3;
-	gdb_regs[_R4]		= thread_regs->ARM_r4;
-	gdb_regs[_R5]		= thread_regs->ARM_r5;
-	gdb_regs[_R6]		= thread_regs->ARM_r6;
-	gdb_regs[_R7]		= thread_regs->ARM_r7;
-	gdb_regs[_R8]		= thread_regs->ARM_r8;
-	gdb_regs[_R9]		= thread_regs->ARM_r9;
-	gdb_regs[_R10]		= thread_regs->ARM_r10;
-	gdb_regs[_FP]		= thread_regs->ARM_fp;
-	gdb_regs[_IP]		= thread_regs->ARM_ip;
-	gdb_regs[_SPT]		= thread_regs->ARM_sp;
-	gdb_regs[_LR]		= thread_regs->ARM_lr;
-	gdb_regs[_PC]		= thread_regs->ARM_pc;
-	gdb_regs[_CPSR]		= thread_regs->ARM_cpsr;
+	ti			= task_thread_info(task);
+	gdb_regs[_R4]		= ti->cpu_context.r4;
+	gdb_regs[_R5]		= ti->cpu_context.r5;
+	gdb_regs[_R6]		= ti->cpu_context.r6;
+	gdb_regs[_R7]		= ti->cpu_context.r7;
+	gdb_regs[_R8]		= ti->cpu_context.r8;
+	gdb_regs[_R9]		= ti->cpu_context.r9;
+	gdb_regs[_R10]		= ti->cpu_context.sl;
+	gdb_regs[_FP]		= ti->cpu_context.fp;
+	gdb_regs[_SPT]		= ti->cpu_context.sp;
+	gdb_regs[_PC]		= ti->cpu_context.pc;
 }
 
 void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
@@ -259,15 +252,17 @@ int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
 	if (err)
 		return err;
 
-	patch_text((void *)bpt->bpt_addr,
-		   *(unsigned int *)arch_kgdb_ops.gdb_bpt_instr);
+	/* Machine is already stopped, so we can use __patch_text() directly */
+	__patch_text((void *)bpt->bpt_addr,
+		     *(unsigned int *)arch_kgdb_ops.gdb_bpt_instr);
 
 	return err;
 }
 
 int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
 {
-	patch_text((void *)bpt->bpt_addr, *(unsigned int *)bpt->saved_instr);
+	/* Machine is already stopped, so we can use __patch_text() directly */
+	__patch_text((void *)bpt->bpt_addr, *(unsigned int *)bpt->saved_instr);
 
 	return 0;
 }
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 8bf3b7c09..b18c1ea56 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -57,7 +57,7 @@ int machine_kexec_prepare(struct kimage *image)
 	for (i = 0; i < image->nr_segments; i++) {
 		current_segment = &image->segment[i];
 
-		if (!memblock_is_region_memory(current_segment->mem,
+		if (!memblock_is_region_memory(idmap_to_phys(current_segment->mem),
 					       current_segment->memsz))
 			return -EINVAL;
 
@@ -143,10 +143,8 @@ void (*kexec_reinit)(void);
 
 void machine_kexec(struct kimage *image)
 {
-	unsigned long page_list;
-	unsigned long reboot_code_buffer_phys;
-	unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
-	unsigned long reboot_entry_phys;
+	unsigned long page_list, reboot_entry_phys;
+	void (*reboot_entry)(void);
 	void *reboot_code_buffer;
 
 	/*
@@ -159,9 +157,6 @@ void machine_kexec(struct kimage *image)
 
 	page_list = image->head & PAGE_MASK;
 
-	/* we need both effective and real address here */
-	reboot_code_buffer_phys =
-	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
 	reboot_code_buffer = page_address(image->control_code_page);
 
 	/* Prepare parameters for reboot_code_buffer*/
@@ -174,10 +169,11 @@ void machine_kexec(struct kimage *image)
 
 	/* copy our kernel relocation code to the control code page */
 	reboot_entry = fncpy(reboot_code_buffer,
-			     reboot_entry,
+			     &relocate_new_kernel,
 			     relocate_new_kernel_size);
-	reboot_entry_phys = (unsigned long)reboot_entry +
-		(reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
+
+	/* get the identity mapping physical address for the reboot code */
+	reboot_entry_phys = virt_to_idmap(reboot_entry);
 
 	pr_info("Bye!\n");
 
diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c
index 097e2e201..0c7efc344 100644
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -32,7 +32,7 @@ struct plt_entries {
 
 static bool in_init(const struct module *mod, u32 addr)
 {
-	return addr - (u32)mod->module_init < mod->init_size;
+	return addr - (u32)mod->init_layout.base < mod->init_layout.size;
 }
 
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index efdddcb97..4f14b5ce6 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -34,7 +34,7 @@
  * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
  */
 #undef MODULES_VADDR
-#define MODULES_VADDR	(((unsigned long)_etext + ~PMD_MASK) & PMD_MASK)
+#define MODULES_VADDR	(((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK)
 #endif
 
 #ifdef CONFIG_MMU
diff --git a/arch/arm/kernel/paravirt.c b/arch/arm/kernel/paravirt.c
new file mode 100644
index 000000000..53f371ed4
--- /dev/null
+++ b/arch/arm/kernel/paravirt.c
@@ -0,0 +1,25 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2013 Citrix Systems
+ *
+ * Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
+ */
+
+#include <linux/export.h>
+#include <linux/jump_label.h>
+#include <linux/types.h>
+#include <asm/paravirt.h>
+
+struct static_key paravirt_steal_enabled;
+struct static_key paravirt_steal_rq_enabled;
+
+struct pv_time_ops pv_time_ops;
+EXPORT_SYMBOL_GPL(pv_time_ops);
diff --git a/arch/arm/kernel/perf_callchain.c b/arch/arm/kernel/perf_callchain.c
index 4e02ae595..22bf1f64d 100644
--- a/arch/arm/kernel/perf_callchain.c
+++ b/arch/arm/kernel/perf_callchain.c
@@ -31,7 +31,7 @@ struct frame_tail {
  */
 static struct frame_tail __user *
 user_backtrace(struct frame_tail __user *tail,
-	       struct perf_callchain_entry *entry)
+	       struct perf_callchain_entry_ctx *entry)
 {
 	struct frame_tail buftail;
 	unsigned long err;
@@ -59,7 +59,7 @@ user_backtrace(struct frame_tail __user *tail,
 }
 
 void
-perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
+perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
 	struct frame_tail __user *tail;
 
@@ -75,7 +75,7 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 
 	tail = (struct frame_tail __user *)regs->ARM_fp - 1;
 
-	while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
+	while ((entry->nr < entry->max_stack) &&
 	       tail && !((unsigned long)tail & 0x3))
 		tail = user_backtrace(tail, entry);
 }
@@ -89,13 +89,13 @@ static int
 callchain_trace(struct stackframe *fr,
 		void *data)
 {
-	struct perf_callchain_entry *entry = data;
+	struct perf_callchain_entry_ctx *entry = data;
 	perf_callchain_store(entry, fr->pc);
 	return 0;
 }
 
 void
-perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs)
+perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
 	struct stackframe fr;
 
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
deleted file mode 100644
index 54272e0be..000000000
--- a/arch/arm/kernel/perf_event.c
+++ /dev/null
@@ -1,896 +0,0 @@
-#undef DEBUG
-
-/*
- * ARM performance counter support.
- *
- * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
- * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
- *
- * This code is based on the sparc64 perf event code, which is in turn based
- * on the x86 code.
- */
-#define pr_fmt(fmt) "hw perfevents: " fmt
-
-#include <linux/bitmap.h>
-#include <linux/cpumask.h>
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/irq.h>
-#include <linux/irqdesc.h>
-
-#include <asm/cputype.h>
-#include <asm/irq_regs.h>
-#include <asm/pmu.h>
-
-static int
-armpmu_map_cache_event(const unsigned (*cache_map)
-				      [PERF_COUNT_HW_CACHE_MAX]
-				      [PERF_COUNT_HW_CACHE_OP_MAX]
-				      [PERF_COUNT_HW_CACHE_RESULT_MAX],
-		       u64 config)
-{
-	unsigned int cache_type, cache_op, cache_result, ret;
-
-	cache_type = (config >>  0) & 0xff;
-	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
-		return -EINVAL;
-
-	cache_op = (config >>  8) & 0xff;
-	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
-		return -EINVAL;
-
-	cache_result = (config >> 16) & 0xff;
-	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
-		return -EINVAL;
-
-	ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
-
-	if (ret == CACHE_OP_UNSUPPORTED)
-		return -ENOENT;
-
-	return ret;
-}
-
-static int
-armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
-{
-	int mapping;
-
-	if (config >= PERF_COUNT_HW_MAX)
-		return -EINVAL;
-
-	mapping = (*event_map)[config];
-	return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
-}
-
-static int
-armpmu_map_raw_event(u32 raw_event_mask, u64 config)
-{
-	return (int)(config & raw_event_mask);
-}
-
-int
-armpmu_map_event(struct perf_event *event,
-		 const unsigned (*event_map)[PERF_COUNT_HW_MAX],
-		 const unsigned (*cache_map)
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX],
-		 u32 raw_event_mask)
-{
-	u64 config = event->attr.config;
-	int type = event->attr.type;
-
-	if (type == event->pmu->type)
-		return armpmu_map_raw_event(raw_event_mask, config);
-
-	switch (type) {
-	case PERF_TYPE_HARDWARE:
-		return armpmu_map_hw_event(event_map, config);
-	case PERF_TYPE_HW_CACHE:
-		return armpmu_map_cache_event(cache_map, config);
-	case PERF_TYPE_RAW:
-		return armpmu_map_raw_event(raw_event_mask, config);
-	}
-
-	return -ENOENT;
-}
-
-int armpmu_event_set_period(struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	s64 left = local64_read(&hwc->period_left);
-	s64 period = hwc->sample_period;
-	int ret = 0;
-
-	if (unlikely(left <= -period)) {
-		left = period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (unlikely(left <= 0)) {
-		left += period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	/*
-	 * Limit the maximum period to prevent the counter value
-	 * from overtaking the one we are about to program. In
-	 * effect we are reducing max_period to account for
-	 * interrupt latency (and we are being very conservative).
-	 */
-	if (left > (armpmu->max_period >> 1))
-		left = armpmu->max_period >> 1;
-
-	local64_set(&hwc->prev_count, (u64)-left);
-
-	armpmu->write_counter(event, (u64)(-left) & 0xffffffff);
-
-	perf_event_update_userpage(event);
-
-	return ret;
-}
-
-u64 armpmu_event_update(struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	u64 delta, prev_raw_count, new_raw_count;
-
-again:
-	prev_raw_count = local64_read(&hwc->prev_count);
-	new_raw_count = armpmu->read_counter(event);
-
-	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
-			     new_raw_count) != prev_raw_count)
-		goto again;
-
-	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
-
-	local64_add(delta, &event->count);
-	local64_sub(delta, &hwc->period_left);
-
-	return new_raw_count;
-}
-
-static void
-armpmu_read(struct perf_event *event)
-{
-	armpmu_event_update(event);
-}
-
-static void
-armpmu_stop(struct perf_event *event, int flags)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-
-	/*
-	 * ARM pmu always has to update the counter, so ignore
-	 * PERF_EF_UPDATE, see comments in armpmu_start().
-	 */
-	if (!(hwc->state & PERF_HES_STOPPED)) {
-		armpmu->disable(event);
-		armpmu_event_update(event);
-		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
-	}
-}
-
-static void armpmu_start(struct perf_event *event, int flags)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-
-	/*
-	 * ARM pmu always has to reprogram the period, so ignore
-	 * PERF_EF_RELOAD, see the comment below.
-	 */
-	if (flags & PERF_EF_RELOAD)
-		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
-
-	hwc->state = 0;
-	/*
-	 * Set the period again. Some counters can't be stopped, so when we
-	 * were stopped we simply disabled the IRQ source and the counter
-	 * may have been left counting. If we don't do this step then we may
-	 * get an interrupt too soon or *way* too late if the overflow has
-	 * happened since disabling.
-	 */
-	armpmu_event_set_period(event);
-	armpmu->enable(event);
-}
-
-static void
-armpmu_del(struct perf_event *event, int flags)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	armpmu_stop(event, PERF_EF_UPDATE);
-	hw_events->events[idx] = NULL;
-	clear_bit(idx, hw_events->used_mask);
-	if (armpmu->clear_event_idx)
-		armpmu->clear_event_idx(hw_events, event);
-
-	perf_event_update_userpage(event);
-}
-
-static int
-armpmu_add(struct perf_event *event, int flags)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx;
-	int err = 0;
-
-	/* An event following a process won't be stopped earlier */
-	if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
-		return -ENOENT;
-
-	perf_pmu_disable(event->pmu);
-
-	/* If we don't have a space for the counter then finish early. */
-	idx = armpmu->get_event_idx(hw_events, event);
-	if (idx < 0) {
-		err = idx;
-		goto out;
-	}
-
-	/*
-	 * If there is an event in the counter we are going to use then make
-	 * sure it is disabled.
-	 */
-	event->hw.idx = idx;
-	armpmu->disable(event);
-	hw_events->events[idx] = event;
-
-	hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
-	if (flags & PERF_EF_START)
-		armpmu_start(event, PERF_EF_RELOAD);
-
-	/* Propagate our changes to the userspace mapping. */
-	perf_event_update_userpage(event);
-
-out:
-	perf_pmu_enable(event->pmu);
-	return err;
-}
-
-static int
-validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events,
-			       struct perf_event *event)
-{
-	struct arm_pmu *armpmu;
-
-	if (is_software_event(event))
-		return 1;
-
-	/*
-	 * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The
-	 * core perf code won't check that the pmu->ctx == leader->ctx
-	 * until after pmu->event_init(event).
-	 */
-	if (event->pmu != pmu)
-		return 0;
-
-	if (event->state < PERF_EVENT_STATE_OFF)
-		return 1;
-
-	if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
-		return 1;
-
-	armpmu = to_arm_pmu(event->pmu);
-	return armpmu->get_event_idx(hw_events, event) >= 0;
-}
-
-static int
-validate_group(struct perf_event *event)
-{
-	struct perf_event *sibling, *leader = event->group_leader;
-	struct pmu_hw_events fake_pmu;
-
-	/*
-	 * Initialise the fake PMU. We only need to populate the
-	 * used_mask for the purposes of validation.
-	 */
-	memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask));
-
-	if (!validate_event(event->pmu, &fake_pmu, leader))
-		return -EINVAL;
-
-	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
-		if (!validate_event(event->pmu, &fake_pmu, sibling))
-			return -EINVAL;
-	}
-
-	if (!validate_event(event->pmu, &fake_pmu, event))
-		return -EINVAL;
-
-	return 0;
-}
-
-static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
-{
-	struct arm_pmu *armpmu;
-	struct platform_device *plat_device;
-	struct arm_pmu_platdata *plat;
-	int ret;
-	u64 start_clock, finish_clock;
-
-	/*
-	 * we request the IRQ with a (possibly percpu) struct arm_pmu**, but
-	 * the handlers expect a struct arm_pmu*. The percpu_irq framework will
-	 * do any necessary shifting, we just need to perform the first
-	 * dereference.
-	 */
-	armpmu = *(void **)dev;
-	plat_device = armpmu->plat_device;
-	plat = dev_get_platdata(&plat_device->dev);
-
-	start_clock = sched_clock();
-	if (plat && plat->handle_irq)
-		ret = plat->handle_irq(irq, armpmu, armpmu->handle_irq);
-	else
-		ret = armpmu->handle_irq(irq, armpmu);
-	finish_clock = sched_clock();
-
-	perf_sample_event_took(finish_clock - start_clock);
-	return ret;
-}
-
-static void
-armpmu_release_hardware(struct arm_pmu *armpmu)
-{
-	armpmu->free_irq(armpmu);
-}
-
-static int
-armpmu_reserve_hardware(struct arm_pmu *armpmu)
-{
-	int err = armpmu->request_irq(armpmu, armpmu_dispatch_irq);
-	if (err) {
-		armpmu_release_hardware(armpmu);
-		return err;
-	}
-
-	return 0;
-}
-
-static void
-hw_perf_event_destroy(struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	atomic_t *active_events	 = &armpmu->active_events;
-	struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;
-
-	if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
-		armpmu_release_hardware(armpmu);
-		mutex_unlock(pmu_reserve_mutex);
-	}
-}
-
-static int
-event_requires_mode_exclusion(struct perf_event_attr *attr)
-{
-	return attr->exclude_idle || attr->exclude_user ||
-	       attr->exclude_kernel || attr->exclude_hv;
-}
-
-static int
-__hw_perf_event_init(struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	int mapping;
-
-	mapping = armpmu->map_event(event);
-
-	if (mapping < 0) {
-		pr_debug("event %x:%llx not supported\n", event->attr.type,
-			 event->attr.config);
-		return mapping;
-	}
-
-	/*
-	 * We don't assign an index until we actually place the event onto
-	 * hardware. Use -1 to signify that we haven't decided where to put it
-	 * yet. For SMP systems, each core has it's own PMU so we can't do any
-	 * clever allocation or constraints checking at this point.
-	 */
-	hwc->idx		= -1;
-	hwc->config_base	= 0;
-	hwc->config		= 0;
-	hwc->event_base		= 0;
-
-	/*
-	 * Check whether we need to exclude the counter from certain modes.
-	 */
-	if ((!armpmu->set_event_filter ||
-	     armpmu->set_event_filter(hwc, &event->attr)) &&
-	     event_requires_mode_exclusion(&event->attr)) {
-		pr_debug("ARM performance counters do not support "
-			 "mode exclusion\n");
-		return -EOPNOTSUPP;
-	}
-
-	/*
-	 * Store the event encoding into the config_base field.
-	 */
-	hwc->config_base	    |= (unsigned long)mapping;
-
-	if (!is_sampling_event(event)) {
-		/*
-		 * For non-sampling runs, limit the sample_period to half
-		 * of the counter width. That way, the new counter value
-		 * is far less likely to overtake the previous one unless
-		 * you have some serious IRQ latency issues.
-		 */
-		hwc->sample_period  = armpmu->max_period >> 1;
-		hwc->last_period    = hwc->sample_period;
-		local64_set(&hwc->period_left, hwc->sample_period);
-	}
-
-	if (event->group_leader != event) {
-		if (validate_group(event) != 0)
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int armpmu_event_init(struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	int err = 0;
-	atomic_t *active_events = &armpmu->active_events;
-
-	/*
-	 * Reject CPU-affine events for CPUs that are of a different class to
-	 * that which this PMU handles. Process-following events (where
-	 * event->cpu == -1) can be migrated between CPUs, and thus we have to
-	 * reject them later (in armpmu_add) if they're scheduled on a
-	 * different class of CPU.
-	 */
-	if (event->cpu != -1 &&
-		!cpumask_test_cpu(event->cpu, &armpmu->supported_cpus))
-		return -ENOENT;
-
-	/* does not support taken branch sampling */
-	if (has_branch_stack(event))
-		return -EOPNOTSUPP;
-
-	if (armpmu->map_event(event) == -ENOENT)
-		return -ENOENT;
-
-	event->destroy = hw_perf_event_destroy;
-
-	if (!atomic_inc_not_zero(active_events)) {
-		mutex_lock(&armpmu->reserve_mutex);
-		if (atomic_read(active_events) == 0)
-			err = armpmu_reserve_hardware(armpmu);
-
-		if (!err)
-			atomic_inc(active_events);
-		mutex_unlock(&armpmu->reserve_mutex);
-	}
-
-	if (err)
-		return err;
-
-	err = __hw_perf_event_init(event);
-	if (err)
-		hw_perf_event_destroy(event);
-
-	return err;
-}
-
-static void armpmu_enable(struct pmu *pmu)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(pmu);
-	struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
-	int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
-
-	/* For task-bound events we may be called on other CPUs */
-	if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
-		return;
-
-	if (enabled)
-		armpmu->start(armpmu);
-}
-
-static void armpmu_disable(struct pmu *pmu)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(pmu);
-
-	/* For task-bound events we may be called on other CPUs */
-	if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
-		return;
-
-	armpmu->stop(armpmu);
-}
-
-/*
- * In heterogeneous systems, events are specific to a particular
- * microarchitecture, and aren't suitable for another. Thus, only match CPUs of
- * the same microarchitecture.
- */
-static int armpmu_filter_match(struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	unsigned int cpu = smp_processor_id();
-	return cpumask_test_cpu(cpu, &armpmu->supported_cpus);
-}
-
-static void armpmu_init(struct arm_pmu *armpmu)
-{
-	atomic_set(&armpmu->active_events, 0);
-	mutex_init(&armpmu->reserve_mutex);
-
-	armpmu->pmu = (struct pmu) {
-		.pmu_enable	= armpmu_enable,
-		.pmu_disable	= armpmu_disable,
-		.event_init	= armpmu_event_init,
-		.add		= armpmu_add,
-		.del		= armpmu_del,
-		.start		= armpmu_start,
-		.stop		= armpmu_stop,
-		.read		= armpmu_read,
-		.filter_match	= armpmu_filter_match,
-	};
-}
-
-int armpmu_register(struct arm_pmu *armpmu, int type)
-{
-	armpmu_init(armpmu);
-	pr_info("enabled with %s PMU driver, %d counters available\n",
-			armpmu->name, armpmu->num_events);
-	return perf_pmu_register(&armpmu->pmu, armpmu->name, type);
-}
-
-/* Set at runtime when we know what CPU type we are. */
-static struct arm_pmu *__oprofile_cpu_pmu;
-
-/*
- * Despite the names, these two functions are CPU-specific and are used
- * by the OProfile/perf code.
- */
-const char *perf_pmu_name(void)
-{
-	if (!__oprofile_cpu_pmu)
-		return NULL;
-
-	return __oprofile_cpu_pmu->name;
-}
-EXPORT_SYMBOL_GPL(perf_pmu_name);
-
-int perf_num_counters(void)
-{
-	int max_events = 0;
-
-	if (__oprofile_cpu_pmu != NULL)
-		max_events = __oprofile_cpu_pmu->num_events;
-
-	return max_events;
-}
-EXPORT_SYMBOL_GPL(perf_num_counters);
-
-static void cpu_pmu_enable_percpu_irq(void *data)
-{
-	int irq = *(int *)data;
-
-	enable_percpu_irq(irq, IRQ_TYPE_NONE);
-}
-
-static void cpu_pmu_disable_percpu_irq(void *data)
-{
-	int irq = *(int *)data;
-
-	disable_percpu_irq(irq);
-}
-
-static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
-{
-	int i, irq, irqs;
-	struct platform_device *pmu_device = cpu_pmu->plat_device;
-	struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events;
-
-	irqs = min(pmu_device->num_resources, num_possible_cpus());
-
-	irq = platform_get_irq(pmu_device, 0);
-	if (irq >= 0 && irq_is_percpu(irq)) {
-		on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1);
-		free_percpu_irq(irq, &hw_events->percpu_pmu);
-	} else {
-		for (i = 0; i < irqs; ++i) {
-			int cpu = i;
-
-			if (cpu_pmu->irq_affinity)
-				cpu = cpu_pmu->irq_affinity[i];
-
-			if (!cpumask_test_and_clear_cpu(cpu, &cpu_pmu->active_irqs))
-				continue;
-			irq = platform_get_irq(pmu_device, i);
-			if (irq >= 0)
-				free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu));
-		}
-	}
-}
-
-static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
-{
-	int i, err, irq, irqs;
-	struct platform_device *pmu_device = cpu_pmu->plat_device;
-	struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events;
-
-	if (!pmu_device)
-		return -ENODEV;
-
-	irqs = min(pmu_device->num_resources, num_possible_cpus());
-	if (irqs < 1) {
-		pr_warn_once("perf/ARM: No irqs for PMU defined, sampling events not supported\n");
-		return 0;
-	}
-
-	irq = platform_get_irq(pmu_device, 0);
-	if (irq >= 0 && irq_is_percpu(irq)) {
-		err = request_percpu_irq(irq, handler, "arm-pmu",
-					 &hw_events->percpu_pmu);
-		if (err) {
-			pr_err("unable to request IRQ%d for ARM PMU counters\n",
-				irq);
-			return err;
-		}
-		on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1);
-	} else {
-		for (i = 0; i < irqs; ++i) {
-			int cpu = i;
-
-			err = 0;
-			irq = platform_get_irq(pmu_device, i);
-			if (irq < 0)
-				continue;
-
-			if (cpu_pmu->irq_affinity)
-				cpu = cpu_pmu->irq_affinity[i];
-
-			/*
-			 * If we have a single PMU interrupt that we can't shift,
-			 * assume that we're running on a uniprocessor machine and
-			 * continue. Otherwise, continue without this interrupt.
-			 */
-			if (irq_set_affinity(irq, cpumask_of(cpu)) && irqs > 1) {
-				pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n",
-					irq, cpu);
-				continue;
-			}
-
-			err = request_irq(irq, handler,
-					  IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu",
-					  per_cpu_ptr(&hw_events->percpu_pmu, cpu));
-			if (err) {
-				pr_err("unable to request IRQ%d for ARM PMU counters\n",
-					irq);
-				return err;
-			}
-
-			cpumask_set_cpu(cpu, &cpu_pmu->active_irqs);
-		}
-	}
-
-	return 0;
-}
-
-/*
- * PMU hardware loses all context when a CPU goes offline.
- * When a CPU is hotplugged back in, since some hardware registers are
- * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
- * junk values out of them.
- */
-static int cpu_pmu_notify(struct notifier_block *b, unsigned long action,
-			  void *hcpu)
-{
-	int cpu = (unsigned long)hcpu;
-	struct arm_pmu *pmu = container_of(b, struct arm_pmu, hotplug_nb);
-
-	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
-		return NOTIFY_DONE;
-
-	if (!cpumask_test_cpu(cpu, &pmu->supported_cpus))
-		return NOTIFY_DONE;
-
-	if (pmu->reset)
-		pmu->reset(pmu);
-	else
-		return NOTIFY_DONE;
-
-	return NOTIFY_OK;
-}
-
-static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	int err;
-	int cpu;
-	struct pmu_hw_events __percpu *cpu_hw_events;
-
-	cpu_hw_events = alloc_percpu(struct pmu_hw_events);
-	if (!cpu_hw_events)
-		return -ENOMEM;
-
-	cpu_pmu->hotplug_nb.notifier_call = cpu_pmu_notify;
-	err = register_cpu_notifier(&cpu_pmu->hotplug_nb);
-	if (err)
-		goto out_hw_events;
-
-	for_each_possible_cpu(cpu) {
-		struct pmu_hw_events *events = per_cpu_ptr(cpu_hw_events, cpu);
-		raw_spin_lock_init(&events->pmu_lock);
-		events->percpu_pmu = cpu_pmu;
-	}
-
-	cpu_pmu->hw_events	= cpu_hw_events;
-	cpu_pmu->request_irq	= cpu_pmu_request_irq;
-	cpu_pmu->free_irq	= cpu_pmu_free_irq;
-
-	/* Ensure the PMU has sane values out of reset. */
-	if (cpu_pmu->reset)
-		on_each_cpu_mask(&cpu_pmu->supported_cpus, cpu_pmu->reset,
-			 cpu_pmu, 1);
-
-	/* If no interrupts available, set the corresponding capability flag */
-	if (!platform_get_irq(cpu_pmu->plat_device, 0))
-		cpu_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
-
-	return 0;
-
-out_hw_events:
-	free_percpu(cpu_hw_events);
-	return err;
-}
-
-static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu)
-{
-	unregister_cpu_notifier(&cpu_pmu->hotplug_nb);
-	free_percpu(cpu_pmu->hw_events);
-}
-
-/*
- * CPU PMU identification and probing.
- */
-static int probe_current_pmu(struct arm_pmu *pmu,
-			     const struct pmu_probe_info *info)
-{
-	int cpu = get_cpu();
-	unsigned int cpuid = read_cpuid_id();
-	int ret = -ENODEV;
-
-	pr_info("probing PMU on CPU %d\n", cpu);
-
-	for (; info->init != NULL; info++) {
-		if ((cpuid & info->mask) != info->cpuid)
-			continue;
-		ret = info->init(pmu);
-		break;
-	}
-
-	put_cpu();
-	return ret;
-}
-
-static int of_pmu_irq_cfg(struct arm_pmu *pmu)
-{
-	int i, irq, *irqs;
-	struct platform_device *pdev = pmu->plat_device;
-
-	/* Don't bother with PPIs; they're already affine */
-	irq = platform_get_irq(pdev, 0);
-	if (irq >= 0 && irq_is_percpu(irq))
-		return 0;
-
-	irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
-	if (!irqs)
-		return -ENOMEM;
-
-	for (i = 0; i < pdev->num_resources; ++i) {
-		struct device_node *dn;
-		int cpu;
-
-		dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity",
-				      i);
-		if (!dn) {
-			pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
-				of_node_full_name(pdev->dev.of_node), i);
-			break;
-		}
-
-		for_each_possible_cpu(cpu)
-			if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL))
-				break;
-
-		if (cpu >= nr_cpu_ids) {
-			pr_warn("Failed to find logical CPU for %s\n",
-				dn->name);
-			of_node_put(dn);
-			break;
-		}
-		of_node_put(dn);
-
-		irqs[i] = cpu;
-		cpumask_set_cpu(cpu, &pmu->supported_cpus);
-	}
-
-	if (i == pdev->num_resources) {
-		pmu->irq_affinity = irqs;
-	} else {
-		kfree(irqs);
-		cpumask_setall(&pmu->supported_cpus);
-	}
-
-	return 0;
-}
-
-int arm_pmu_device_probe(struct platform_device *pdev,
-			 const struct of_device_id *of_table,
-			 const struct pmu_probe_info *probe_table)
-{
-	const struct of_device_id *of_id;
-	const int (*init_fn)(struct arm_pmu *);
-	struct device_node *node = pdev->dev.of_node;
-	struct arm_pmu *pmu;
-	int ret = -ENODEV;
-
-	pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL);
-	if (!pmu) {
-		pr_info("failed to allocate PMU device!\n");
-		return -ENOMEM;
-	}
-
-	if (!__oprofile_cpu_pmu)
-		__oprofile_cpu_pmu = pmu;
-
-	pmu->plat_device = pdev;
-
-	if (node && (of_id = of_match_node(of_table, pdev->dev.of_node))) {
-		init_fn = of_id->data;
-
-		ret = of_pmu_irq_cfg(pmu);
-		if (!ret)
-			ret = init_fn(pmu);
-	} else {
-		ret = probe_current_pmu(pmu, probe_table);
-		cpumask_setall(&pmu->supported_cpus);
-	}
-
-	if (ret) {
-		pr_info("failed to probe PMU!\n");
-		goto out_free;
-	}
-
-	ret = cpu_pmu_init(pmu);
-	if (ret)
-		goto out_free;
-
-	ret = armpmu_register(pmu, -1);
-	if (ret)
-		goto out_destroy;
-
-	return 0;
-
-out_destroy:
-	cpu_pmu_destroy(pmu);
-out_free:
-	pr_info("failed to register PMU devices!\n");
-	kfree(pmu);
-	return ret;
-}
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 09f83e414..09413e7b4 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -34,9 +34,9 @@
 
 #include <asm/cputype.h>
 #include <asm/irq_regs.h>
-#include <asm/pmu.h>
 
 #include <linux/of.h>
+#include <linux/perf/arm_pmu.h>
 #include <linux/platform_device.h>
 
 enum armv6_perf_types {
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index f9b37f876..15063851c 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -21,11 +21,11 @@
 #include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/irq_regs.h>
-#include <asm/pmu.h>
 #include <asm/vfp.h>
 #include "../vfp/vfpinstr.h"
 
 #include <linux/of.h>
+#include <linux/perf/arm_pmu.h>
 #include <linux/platform_device.h>
 
 /*
@@ -35,133 +35,117 @@
  * but the encodings are considered to be `reserved' in the case that
  * they are not available.
  */
-enum armv7_perf_types {
-	ARMV7_PERFCTR_PMNC_SW_INCR			= 0x00,
-	ARMV7_PERFCTR_L1_ICACHE_REFILL			= 0x01,
-	ARMV7_PERFCTR_ITLB_REFILL			= 0x02,
-	ARMV7_PERFCTR_L1_DCACHE_REFILL			= 0x03,
-	ARMV7_PERFCTR_L1_DCACHE_ACCESS			= 0x04,
-	ARMV7_PERFCTR_DTLB_REFILL			= 0x05,
-	ARMV7_PERFCTR_MEM_READ				= 0x06,
-	ARMV7_PERFCTR_MEM_WRITE				= 0x07,
-	ARMV7_PERFCTR_INSTR_EXECUTED			= 0x08,
-	ARMV7_PERFCTR_EXC_TAKEN				= 0x09,
-	ARMV7_PERFCTR_EXC_EXECUTED			= 0x0A,
-	ARMV7_PERFCTR_CID_WRITE				= 0x0B,
+#define ARMV7_PERFCTR_PMNC_SW_INCR			0x00
+#define ARMV7_PERFCTR_L1_ICACHE_REFILL			0x01
+#define ARMV7_PERFCTR_ITLB_REFILL			0x02
+#define ARMV7_PERFCTR_L1_DCACHE_REFILL			0x03
+#define ARMV7_PERFCTR_L1_DCACHE_ACCESS			0x04
+#define ARMV7_PERFCTR_DTLB_REFILL			0x05
+#define ARMV7_PERFCTR_MEM_READ				0x06
+#define ARMV7_PERFCTR_MEM_WRITE				0x07
+#define ARMV7_PERFCTR_INSTR_EXECUTED			0x08
+#define ARMV7_PERFCTR_EXC_TAKEN				0x09
+#define ARMV7_PERFCTR_EXC_EXECUTED			0x0A
+#define ARMV7_PERFCTR_CID_WRITE				0x0B
 
-	/*
-	 * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
-	 * It counts:
-	 *  - all (taken) branch instructions,
-	 *  - instructions that explicitly write the PC,
-	 *  - exception generating instructions.
-	 */
-	ARMV7_PERFCTR_PC_WRITE				= 0x0C,
-	ARMV7_PERFCTR_PC_IMM_BRANCH			= 0x0D,
-	ARMV7_PERFCTR_PC_PROC_RETURN			= 0x0E,
-	ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS		= 0x0F,
-	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED		= 0x10,
-	ARMV7_PERFCTR_CLOCK_CYCLES			= 0x11,
-	ARMV7_PERFCTR_PC_BRANCH_PRED			= 0x12,
-
-	/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
-	ARMV7_PERFCTR_MEM_ACCESS			= 0x13,
-	ARMV7_PERFCTR_L1_ICACHE_ACCESS			= 0x14,
-	ARMV7_PERFCTR_L1_DCACHE_WB			= 0x15,
-	ARMV7_PERFCTR_L2_CACHE_ACCESS			= 0x16,
-	ARMV7_PERFCTR_L2_CACHE_REFILL			= 0x17,
-	ARMV7_PERFCTR_L2_CACHE_WB			= 0x18,
-	ARMV7_PERFCTR_BUS_ACCESS			= 0x19,
-	ARMV7_PERFCTR_MEM_ERROR				= 0x1A,
-	ARMV7_PERFCTR_INSTR_SPEC			= 0x1B,
-	ARMV7_PERFCTR_TTBR_WRITE			= 0x1C,
-	ARMV7_PERFCTR_BUS_CYCLES			= 0x1D,
-
-	ARMV7_PERFCTR_CPU_CYCLES			= 0xFF
-};
+/*
+ * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+ * It counts:
+ *  - all (taken) branch instructions,
+ *  - instructions that explicitly write the PC,
+ *  - exception generating instructions.
+ */
+#define ARMV7_PERFCTR_PC_WRITE				0x0C
+#define ARMV7_PERFCTR_PC_IMM_BRANCH			0x0D
+#define ARMV7_PERFCTR_PC_PROC_RETURN			0x0E
+#define ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS		0x0F
+#define ARMV7_PERFCTR_PC_BRANCH_MIS_PRED		0x10
+#define ARMV7_PERFCTR_CLOCK_CYCLES			0x11
+#define ARMV7_PERFCTR_PC_BRANCH_PRED			0x12
+
+/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
+#define ARMV7_PERFCTR_MEM_ACCESS			0x13
+#define ARMV7_PERFCTR_L1_ICACHE_ACCESS			0x14
+#define ARMV7_PERFCTR_L1_DCACHE_WB			0x15
+#define ARMV7_PERFCTR_L2_CACHE_ACCESS			0x16
+#define ARMV7_PERFCTR_L2_CACHE_REFILL			0x17
+#define ARMV7_PERFCTR_L2_CACHE_WB			0x18
+#define ARMV7_PERFCTR_BUS_ACCESS			0x19
+#define ARMV7_PERFCTR_MEM_ERROR				0x1A
+#define ARMV7_PERFCTR_INSTR_SPEC			0x1B
+#define ARMV7_PERFCTR_TTBR_WRITE			0x1C
+#define ARMV7_PERFCTR_BUS_CYCLES			0x1D
+
+#define ARMV7_PERFCTR_CPU_CYCLES			0xFF
 
 /* ARMv7 Cortex-A8 specific event types */
-enum armv7_a8_perf_types {
-	ARMV7_A8_PERFCTR_L2_CACHE_ACCESS		= 0x43,
-	ARMV7_A8_PERFCTR_L2_CACHE_REFILL		= 0x44,
-	ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS		= 0x50,
-	ARMV7_A8_PERFCTR_STALL_ISIDE			= 0x56,
-};
+#define ARMV7_A8_PERFCTR_L2_CACHE_ACCESS		0x43
+#define ARMV7_A8_PERFCTR_L2_CACHE_REFILL		0x44
+#define ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS		0x50
+#define ARMV7_A8_PERFCTR_STALL_ISIDE			0x56
 
 /* ARMv7 Cortex-A9 specific event types */
-enum armv7_a9_perf_types {
-	ARMV7_A9_PERFCTR_INSTR_CORE_RENAME		= 0x68,
-	ARMV7_A9_PERFCTR_STALL_ICACHE			= 0x60,
-	ARMV7_A9_PERFCTR_STALL_DISPATCH			= 0x66,
-};
+#define ARMV7_A9_PERFCTR_INSTR_CORE_RENAME		0x68
+#define ARMV7_A9_PERFCTR_STALL_ICACHE			0x60
+#define ARMV7_A9_PERFCTR_STALL_DISPATCH			0x66
 
 /* ARMv7 Cortex-A5 specific event types */
-enum armv7_a5_perf_types {
-	ARMV7_A5_PERFCTR_PREFETCH_LINEFILL		= 0xc2,
-	ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP		= 0xc3,
-};
+#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL		0xc2
+#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP		0xc3
 
 /* ARMv7 Cortex-A15 specific event types */
-enum armv7_a15_perf_types {
-	ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ		= 0x40,
-	ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE	= 0x41,
-	ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ		= 0x42,
-	ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE	= 0x43,
+#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ		0x40
+#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE	0x41
+#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ		0x42
+#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE	0x43
 
-	ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ		= 0x4C,
-	ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE		= 0x4D,
+#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ		0x4C
+#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE		0x4D
 
-	ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ		= 0x50,
-	ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE		= 0x51,
-	ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ		= 0x52,
-	ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE		= 0x53,
+#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ		0x50
+#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE		0x51
+#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ		0x52
+#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE		0x53
 
-	ARMV7_A15_PERFCTR_PC_WRITE_SPEC			= 0x76,
-};
+#define ARMV7_A15_PERFCTR_PC_WRITE_SPEC			0x76
 
 /* ARMv7 Cortex-A12 specific event types */
-enum armv7_a12_perf_types {
-	ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ		= 0x40,
-	ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE	= 0x41,
+#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ		0x40
+#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE	0x41
 
-	ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ		= 0x50,
-	ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE		= 0x51,
+#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ		0x50
+#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE		0x51
 
-	ARMV7_A12_PERFCTR_PC_WRITE_SPEC			= 0x76,
+#define ARMV7_A12_PERFCTR_PC_WRITE_SPEC			0x76
 
-	ARMV7_A12_PERFCTR_PF_TLB_REFILL			= 0xe7,
-};
+#define ARMV7_A12_PERFCTR_PF_TLB_REFILL			0xe7
 
 /* ARMv7 Krait specific event types */
-enum krait_perf_types {
-	KRAIT_PMRESR0_GROUP0				= 0xcc,
-	KRAIT_PMRESR1_GROUP0				= 0xd0,
-	KRAIT_PMRESR2_GROUP0				= 0xd4,
-	KRAIT_VPMRESR0_GROUP0				= 0xd8,
+#define KRAIT_PMRESR0_GROUP0				0xcc
+#define KRAIT_PMRESR1_GROUP0				0xd0
+#define KRAIT_PMRESR2_GROUP0				0xd4
+#define KRAIT_VPMRESR0_GROUP0				0xd8
 
-	KRAIT_PERFCTR_L1_ICACHE_ACCESS			= 0x10011,
-	KRAIT_PERFCTR_L1_ICACHE_MISS			= 0x10010,
+#define KRAIT_PERFCTR_L1_ICACHE_ACCESS			0x10011
+#define KRAIT_PERFCTR_L1_ICACHE_MISS			0x10010
 
-	KRAIT_PERFCTR_L1_ITLB_ACCESS			= 0x12222,
-	KRAIT_PERFCTR_L1_DTLB_ACCESS			= 0x12210,
-};
+#define KRAIT_PERFCTR_L1_ITLB_ACCESS			0x12222
+#define KRAIT_PERFCTR_L1_DTLB_ACCESS			0x12210
 
 /* ARMv7 Scorpion specific event types */
-enum scorpion_perf_types {
-	SCORPION_LPM0_GROUP0				= 0x4c,
-	SCORPION_LPM1_GROUP0				= 0x50,
-	SCORPION_LPM2_GROUP0				= 0x54,
-	SCORPION_L2LPM_GROUP0				= 0x58,
-	SCORPION_VLPM_GROUP0				= 0x5c,
+#define SCORPION_LPM0_GROUP0				0x4c
+#define SCORPION_LPM1_GROUP0				0x50
+#define SCORPION_LPM2_GROUP0				0x54
+#define SCORPION_L2LPM_GROUP0				0x58
+#define SCORPION_VLPM_GROUP0				0x5c
 
-	SCORPION_ICACHE_ACCESS				= 0x10053,
-	SCORPION_ICACHE_MISS				= 0x10052,
+#define SCORPION_ICACHE_ACCESS				0x10053
+#define SCORPION_ICACHE_MISS				0x10052
 
-	SCORPION_DTLB_ACCESS				= 0x12013,
-	SCORPION_DTLB_MISS				= 0x12012,
+#define SCORPION_DTLB_ACCESS				0x12013
+#define SCORPION_DTLB_MISS				0x12012
 
-	SCORPION_ITLB_MISS				= 0x12021,
-};
+#define SCORPION_ITLB_MISS				0x12021
 
 /*
  * Cortex-A8 HW events mapping
@@ -547,6 +531,134 @@ static const unsigned scorpion_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 };
 
+PMU_FORMAT_ATTR(event, "config:0-7");
+
+static struct attribute *armv7_pmu_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group armv7_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = armv7_pmu_format_attrs,
+};
+
+#define ARMV7_EVENT_ATTR_RESOLVE(m) #m
+#define ARMV7_EVENT_ATTR(name, config) \
+	PMU_EVENT_ATTR_STRING(name, armv7_event_attr_##name, \
+			      "event=" ARMV7_EVENT_ATTR_RESOLVE(config))
+
+ARMV7_EVENT_ATTR(sw_incr, ARMV7_PERFCTR_PMNC_SW_INCR);
+ARMV7_EVENT_ATTR(l1i_cache_refill, ARMV7_PERFCTR_L1_ICACHE_REFILL);
+ARMV7_EVENT_ATTR(l1i_tlb_refill, ARMV7_PERFCTR_ITLB_REFILL);
+ARMV7_EVENT_ATTR(l1d_cache_refill, ARMV7_PERFCTR_L1_DCACHE_REFILL);
+ARMV7_EVENT_ATTR(l1d_cache, ARMV7_PERFCTR_L1_DCACHE_ACCESS);
+ARMV7_EVENT_ATTR(l1d_tlb_refill, ARMV7_PERFCTR_DTLB_REFILL);
+ARMV7_EVENT_ATTR(ld_retired, ARMV7_PERFCTR_MEM_READ);
+ARMV7_EVENT_ATTR(st_retired, ARMV7_PERFCTR_MEM_WRITE);
+ARMV7_EVENT_ATTR(inst_retired, ARMV7_PERFCTR_INSTR_EXECUTED);
+ARMV7_EVENT_ATTR(exc_taken, ARMV7_PERFCTR_EXC_TAKEN);
+ARMV7_EVENT_ATTR(exc_return, ARMV7_PERFCTR_EXC_EXECUTED);
+ARMV7_EVENT_ATTR(cid_write_retired, ARMV7_PERFCTR_CID_WRITE);
+ARMV7_EVENT_ATTR(pc_write_retired, ARMV7_PERFCTR_PC_WRITE);
+ARMV7_EVENT_ATTR(br_immed_retired, ARMV7_PERFCTR_PC_IMM_BRANCH);
+ARMV7_EVENT_ATTR(br_return_retired, ARMV7_PERFCTR_PC_PROC_RETURN);
+ARMV7_EVENT_ATTR(unaligned_ldst_retired, ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS);
+ARMV7_EVENT_ATTR(br_mis_pred, ARMV7_PERFCTR_PC_BRANCH_MIS_PRED);
+ARMV7_EVENT_ATTR(cpu_cycles, ARMV7_PERFCTR_CLOCK_CYCLES);
+ARMV7_EVENT_ATTR(br_pred, ARMV7_PERFCTR_PC_BRANCH_PRED);
+
+static struct attribute *armv7_pmuv1_event_attrs[] = {
+	&armv7_event_attr_sw_incr.attr.attr,
+	&armv7_event_attr_l1i_cache_refill.attr.attr,
+	&armv7_event_attr_l1i_tlb_refill.attr.attr,
+	&armv7_event_attr_l1d_cache_refill.attr.attr,
+	&armv7_event_attr_l1d_cache.attr.attr,
+	&armv7_event_attr_l1d_tlb_refill.attr.attr,
+	&armv7_event_attr_ld_retired.attr.attr,
+	&armv7_event_attr_st_retired.attr.attr,
+	&armv7_event_attr_inst_retired.attr.attr,
+	&armv7_event_attr_exc_taken.attr.attr,
+	&armv7_event_attr_exc_return.attr.attr,
+	&armv7_event_attr_cid_write_retired.attr.attr,
+	&armv7_event_attr_pc_write_retired.attr.attr,
+	&armv7_event_attr_br_immed_retired.attr.attr,
+	&armv7_event_attr_br_return_retired.attr.attr,
+	&armv7_event_attr_unaligned_ldst_retired.attr.attr,
+	&armv7_event_attr_br_mis_pred.attr.attr,
+	&armv7_event_attr_cpu_cycles.attr.attr,
+	&armv7_event_attr_br_pred.attr.attr,
+	NULL,
+};
+
+static struct attribute_group armv7_pmuv1_events_attr_group = {
+	.name = "events",
+	.attrs = armv7_pmuv1_event_attrs,
+};
+
+static const struct attribute_group *armv7_pmuv1_attr_groups[] = {
+	&armv7_pmuv1_events_attr_group,
+	&armv7_pmu_format_attr_group,
+	NULL,
+};
+
+ARMV7_EVENT_ATTR(mem_access, ARMV7_PERFCTR_MEM_ACCESS);
+ARMV7_EVENT_ATTR(l1i_cache, ARMV7_PERFCTR_L1_ICACHE_ACCESS);
+ARMV7_EVENT_ATTR(l1d_cache_wb, ARMV7_PERFCTR_L1_DCACHE_WB);
+ARMV7_EVENT_ATTR(l2d_cache, ARMV7_PERFCTR_L2_CACHE_ACCESS);
+ARMV7_EVENT_ATTR(l2d_cache_refill, ARMV7_PERFCTR_L2_CACHE_REFILL);
+ARMV7_EVENT_ATTR(l2d_cache_wb, ARMV7_PERFCTR_L2_CACHE_WB);
+ARMV7_EVENT_ATTR(bus_access, ARMV7_PERFCTR_BUS_ACCESS);
+ARMV7_EVENT_ATTR(memory_error, ARMV7_PERFCTR_MEM_ERROR);
+ARMV7_EVENT_ATTR(inst_spec, ARMV7_PERFCTR_INSTR_SPEC);
+ARMV7_EVENT_ATTR(ttbr_write_retired, ARMV7_PERFCTR_TTBR_WRITE);
+ARMV7_EVENT_ATTR(bus_cycles, ARMV7_PERFCTR_BUS_CYCLES);
+
+static struct attribute *armv7_pmuv2_event_attrs[] = {
+	&armv7_event_attr_sw_incr.attr.attr,
+	&armv7_event_attr_l1i_cache_refill.attr.attr,
+	&armv7_event_attr_l1i_tlb_refill.attr.attr,
+	&armv7_event_attr_l1d_cache_refill.attr.attr,
+	&armv7_event_attr_l1d_cache.attr.attr,
+	&armv7_event_attr_l1d_tlb_refill.attr.attr,
+	&armv7_event_attr_ld_retired.attr.attr,
+	&armv7_event_attr_st_retired.attr.attr,
+	&armv7_event_attr_inst_retired.attr.attr,
+	&armv7_event_attr_exc_taken.attr.attr,
+	&armv7_event_attr_exc_return.attr.attr,
+	&armv7_event_attr_cid_write_retired.attr.attr,
+	&armv7_event_attr_pc_write_retired.attr.attr,
+	&armv7_event_attr_br_immed_retired.attr.attr,
+	&armv7_event_attr_br_return_retired.attr.attr,
+	&armv7_event_attr_unaligned_ldst_retired.attr.attr,
+	&armv7_event_attr_br_mis_pred.attr.attr,
+	&armv7_event_attr_cpu_cycles.attr.attr,
+	&armv7_event_attr_br_pred.attr.attr,
+	&armv7_event_attr_mem_access.attr.attr,
+	&armv7_event_attr_l1i_cache.attr.attr,
+	&armv7_event_attr_l1d_cache_wb.attr.attr,
+	&armv7_event_attr_l2d_cache.attr.attr,
+	&armv7_event_attr_l2d_cache_refill.attr.attr,
+	&armv7_event_attr_l2d_cache_wb.attr.attr,
+	&armv7_event_attr_bus_access.attr.attr,
+	&armv7_event_attr_memory_error.attr.attr,
+	&armv7_event_attr_inst_spec.attr.attr,
+	&armv7_event_attr_ttbr_write_retired.attr.attr,
+	&armv7_event_attr_bus_cycles.attr.attr,
+	NULL,
+};
+
+static struct attribute_group armv7_pmuv2_events_attr_group = {
+	.name = "events",
+	.attrs = armv7_pmuv2_event_attrs,
+};
+
+static const struct attribute_group *armv7_pmuv2_attr_groups[] = {
+	&armv7_pmuv2_events_attr_group,
+	&armv7_pmu_format_attr_group,
+	NULL,
+};
+
 /*
  * Perf Events' indices
  */
@@ -600,6 +712,11 @@ static const unsigned scorpion_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 #define	ARMV7_EXCLUDE_USER	(1 << 30)
 #define	ARMV7_INCLUDE_HYP	(1 << 27)
 
+/*
+ * Secure debug enable reg
+ */
+#define ARMV7_SDER_SUNIDEN	BIT(1) /* Permit non-invasive debug */
+
 static inline u32 armv7_pmnc_read(void)
 {
 	u32 val;
@@ -982,7 +1099,13 @@ static int armv7pmu_set_event_filter(struct hw_perf_event *event,
 static void armv7pmu_reset(void *info)
 {
 	struct arm_pmu *cpu_pmu = (struct arm_pmu *)info;
-	u32 idx, nb_cnt = cpu_pmu->num_events;
+	u32 idx, nb_cnt = cpu_pmu->num_events, val;
+
+	if (cpu_pmu->secure_access) {
+		asm volatile("mrc p15, 0, %0, c1, c1, 1" : "=r" (val));
+		val |= ARMV7_SDER_SUNIDEN;
+		asm volatile("mcr p15, 0, %0, c1, c1, 1" : : "r" (val));
+	}
 
 	/* The counter and interrupt enable registers are unknown at reset. */
 	for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) {
@@ -1085,6 +1208,7 @@ static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "armv7_cortex_a8";
 	cpu_pmu->map_event	= armv7_a8_map_event;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1093,6 +1217,7 @@ static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "armv7_cortex_a9";
 	cpu_pmu->map_event	= armv7_a9_map_event;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1101,6 +1226,7 @@ static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "armv7_cortex_a5";
 	cpu_pmu->map_event	= armv7_a5_map_event;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1110,6 +1236,7 @@ static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->name		= "armv7_cortex_a15";
 	cpu_pmu->map_event	= armv7_a15_map_event;
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1119,6 +1246,7 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->name		= "armv7_cortex_a7";
 	cpu_pmu->map_event	= armv7_a7_map_event;
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1128,6 +1256,7 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->name		= "armv7_cortex_a12";
 	cpu_pmu->map_event	= armv7_a12_map_event;
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1135,6 +1264,7 @@ static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	int ret = armv7_a12_pmu_init(cpu_pmu);
 	cpu_pmu->name = "armv7_cortex_a17";
+	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
 	return ret;
 }
 
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 304d056d5..aa0499e2e 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -16,9 +16,9 @@
 
 #include <asm/cputype.h>
 #include <asm/irq_regs.h>
-#include <asm/pmu.h>
 
 #include <linux/of.h>
+#include <linux/perf/arm_pmu.h>
 #include <linux/platform_device.h>
 
 enum xscale_perf_types {
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
index 8153e36b2..7c9248b74 100644
--- a/arch/arm/kernel/pj4-cp0.c
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -66,9 +66,13 @@ static void __init pj4_cp_access_write(u32 value)
 
 	__asm__ __volatile__ (
 		"mcr	p15, 0, %1, c1, c0, 2\n\t"
+#ifdef CONFIG_THUMB2_KERNEL
+		"isb\n\t"
+#else
 		"mrc	p15, 0, %0, c1, c0, 2\n\t"
 		"mov	%0, %0\n\t"
 		"sub	pc, pc, #4\n\t"
+#endif
 		: "=r" (temp) : "r" (value));
 }
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index f192a2a41..612eb530f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -91,17 +91,30 @@ void arch_cpu_idle_exit(void)
 	ledtrig_cpu(CPU_LED_IDLE_END);
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-void arch_cpu_idle_dead(void)
-{
-	cpu_die();
-}
-#endif
-
 void __show_regs(struct pt_regs *regs)
 {
 	unsigned long flags;
 	char buf[64];
+#ifndef CONFIG_CPU_V7M
+	unsigned int domain, fs;
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/*
+	 * Get the domain register for the parent context. In user
+	 * mode, we don't save the DACR, so lets use what it should
+	 * be. For other modes, we place it after the pt_regs struct.
+	 */
+	if (user_mode(regs)) {
+		domain = DACR_UACCESS_ENABLE;
+		fs = get_fs();
+	} else {
+		domain = to_svc_pt_regs(regs)->dacr;
+		fs = to_svc_pt_regs(regs)->addr_limit;
+	}
+#else
+	domain = get_domain();
+	fs = get_fs();
+#endif
+#endif
 
 	show_regs_print_info(KERN_DEFAULT);
 
@@ -129,12 +142,23 @@ void __show_regs(struct pt_regs *regs)
 	buf[4] = '\0';
 
 #ifndef CONFIG_CPU_V7M
-	printk("Flags: %s  IRQs o%s  FIQs o%s  Mode %s  ISA %s  Segment %s\n",
-		buf, interrupts_enabled(regs) ? "n" : "ff",
-		fast_interrupts_enabled(regs) ? "n" : "ff",
-		processor_modes[processor_mode(regs)],
-		isa_modes[isa_mode(regs)],
-		get_fs() == get_ds() ? "kernel" : "user");
+	{
+		const char *segment;
+
+		if ((domain & domain_mask(DOMAIN_USER)) ==
+		    domain_val(DOMAIN_USER, DOMAIN_NOACCESS))
+			segment = "none";
+		else if (fs == get_ds())
+			segment = "kernel";
+		else
+			segment = "user";
+
+		printk("Flags: %s  IRQs o%s  FIQs o%s  Mode %s  ISA %s  Segment %s\n",
+			buf, interrupts_enabled(regs) ? "n" : "ff",
+			fast_interrupts_enabled(regs) ? "n" : "ff",
+			processor_modes[processor_mode(regs)],
+			isa_modes[isa_mode(regs)], segment);
+	}
 #else
 	printk("xPSR: %08lx\n", regs->ARM_cpsr);
 #endif
@@ -146,12 +170,11 @@ void __show_regs(struct pt_regs *regs)
 		buf[0] = '\0';
 #ifdef CONFIG_CPU_CP15_MMU
 		{
-			unsigned int transbase, dac;
+			unsigned int transbase;
 			asm("mrc p15, 0, %0, c2, c0\n\t"
-			    "mrc p15, 0, %1, c3, c0\n"
-			    : "=r" (transbase), "=r" (dac));
+			    : "=r" (transbase));
 			snprintf(buf, sizeof(buf), "  Table: %08x  DAC: %08x",
-			  	transbase, dac);
+				transbase, domain);
 		}
 #endif
 		asm("mrc p15, 0, %0, c1, c0\n" : "=r" (ctrl));
@@ -174,9 +197,9 @@ EXPORT_SYMBOL_GPL(thread_notify_head);
 /*
  * Free current thread data structures etc..
  */
-void exit_thread(void)
+void exit_thread(struct task_struct *tsk)
 {
-	thread_notify(THREAD_NOTIFY_EXIT, current_thread_info());
+	thread_notify(THREAD_NOTIFY_EXIT, task_thread_info(tsk));
 }
 
 void flush_thread(void)
@@ -210,6 +233,16 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 
 	memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
 
+#ifdef CONFIG_CPU_USE_DOMAINS
+	/*
+	 * Copy the initial value of the domain access control register
+	 * from the current thread: thread->addr_limit will have been
+	 * copied from the current thread via setup_thread_stack() in
+	 * kernel/fork.c
+	 */
+	thread->cpu_domain = get_domain();
+#endif
+
 	if (likely(!(p->flags & PF_KTHREAD))) {
 		*childregs = *current_pt_regs();
 		childregs->ARM_r0 = 0;
@@ -391,7 +424,8 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	npages = 1; /* for sigpage */
 	npages += vdso_total_pages;
 
-	down_write(&mm->mmap_sem);
+	if (down_write_killable(&mm->mmap_sem))
+		return -EINTR;
 	hint = sigpage_addr(mm, npages);
 	addr = get_unmapped_area(NULL, hint, npages << PAGE_SHIFT, 0, 0);
 	if (IS_ERR_VALUE(addr)) {
diff --git a/arch/arm/kernel/psci-call.S b/arch/arm/kernel/psci-call.S
deleted file mode 100644
index a78e9e1e2..000000000
--- a/arch/arm/kernel/psci-call.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * Copyright (C) 2015 ARM Limited
- *
- * Author: Mark Rutland <mark.rutland@arm.com>
- */
-
-#include <linux/linkage.h>
-
-#include <asm/opcodes-sec.h>
-#include <asm/opcodes-virt.h>
-
-/* int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */
-ENTRY(__invoke_psci_fn_hvc)
-	__HVC(0)
-	bx	lr
-ENDPROC(__invoke_psci_fn_hvc)
-
-/* int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */
-ENTRY(__invoke_psci_fn_smc)
-	__SMC(0)
-	bx	lr
-ENDPROC(__invoke_psci_fn_smc)
diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c
deleted file mode 100644
index f90fdf4ce..000000000
--- a/arch/arm/kernel/psci.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * Copyright (C) 2012 ARM Limited
- *
- * Author: Will Deacon <will.deacon@arm.com>
- */
-
-#define pr_fmt(fmt) "psci: " fmt
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/reboot.h>
-#include <linux/pm.h>
-#include <uapi/linux/psci.h>
-
-#include <asm/compiler.h>
-#include <asm/errno.h>
-#include <asm/psci.h>
-#include <asm/system_misc.h>
-
-struct psci_operations psci_ops;
-
-static int (*invoke_psci_fn)(u32, u32, u32, u32);
-typedef int (*psci_initcall_t)(const struct device_node *);
-
-asmlinkage int __invoke_psci_fn_hvc(u32, u32, u32, u32);
-asmlinkage int __invoke_psci_fn_smc(u32, u32, u32, u32);
-
-enum psci_function {
-	PSCI_FN_CPU_SUSPEND,
-	PSCI_FN_CPU_ON,
-	PSCI_FN_CPU_OFF,
-	PSCI_FN_MIGRATE,
-	PSCI_FN_AFFINITY_INFO,
-	PSCI_FN_MIGRATE_INFO_TYPE,
-	PSCI_FN_MAX,
-};
-
-static u32 psci_function_id[PSCI_FN_MAX];
-
-static int psci_to_linux_errno(int errno)
-{
-	switch (errno) {
-	case PSCI_RET_SUCCESS:
-		return 0;
-	case PSCI_RET_NOT_SUPPORTED:
-		return -EOPNOTSUPP;
-	case PSCI_RET_INVALID_PARAMS:
-		return -EINVAL;
-	case PSCI_RET_DENIED:
-		return -EPERM;
-	};
-
-	return -EINVAL;
-}
-
-static u32 psci_power_state_pack(struct psci_power_state state)
-{
-	return ((state.id << PSCI_0_2_POWER_STATE_ID_SHIFT)
-			& PSCI_0_2_POWER_STATE_ID_MASK) |
-		((state.type << PSCI_0_2_POWER_STATE_TYPE_SHIFT)
-		 & PSCI_0_2_POWER_STATE_TYPE_MASK) |
-		((state.affinity_level << PSCI_0_2_POWER_STATE_AFFL_SHIFT)
-		 & PSCI_0_2_POWER_STATE_AFFL_MASK);
-}
-
-static int psci_get_version(void)
-{
-	int err;
-
-	err = invoke_psci_fn(PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0);
-	return err;
-}
-
-static int psci_cpu_suspend(struct psci_power_state state,
-			    unsigned long entry_point)
-{
-	int err;
-	u32 fn, power_state;
-
-	fn = psci_function_id[PSCI_FN_CPU_SUSPEND];
-	power_state = psci_power_state_pack(state);
-	err = invoke_psci_fn(fn, power_state, entry_point, 0);
-	return psci_to_linux_errno(err);
-}
-
-static int psci_cpu_off(struct psci_power_state state)
-{
-	int err;
-	u32 fn, power_state;
-
-	fn = psci_function_id[PSCI_FN_CPU_OFF];
-	power_state = psci_power_state_pack(state);
-	err = invoke_psci_fn(fn, power_state, 0, 0);
-	return psci_to_linux_errno(err);
-}
-
-static int psci_cpu_on(unsigned long cpuid, unsigned long entry_point)
-{
-	int err;
-	u32 fn;
-
-	fn = psci_function_id[PSCI_FN_CPU_ON];
-	err = invoke_psci_fn(fn, cpuid, entry_point, 0);
-	return psci_to_linux_errno(err);
-}
-
-static int psci_migrate(unsigned long cpuid)
-{
-	int err;
-	u32 fn;
-
-	fn = psci_function_id[PSCI_FN_MIGRATE];
-	err = invoke_psci_fn(fn, cpuid, 0, 0);
-	return psci_to_linux_errno(err);
-}
-
-static int psci_affinity_info(unsigned long target_affinity,
-		unsigned long lowest_affinity_level)
-{
-	int err;
-	u32 fn;
-
-	fn = psci_function_id[PSCI_FN_AFFINITY_INFO];
-	err = invoke_psci_fn(fn, target_affinity, lowest_affinity_level, 0);
-	return err;
-}
-
-static int psci_migrate_info_type(void)
-{
-	int err;
-	u32 fn;
-
-	fn = psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE];
-	err = invoke_psci_fn(fn, 0, 0, 0);
-	return err;
-}
-
-static int get_set_conduit_method(struct device_node *np)
-{
-	const char *method;
-
-	pr_info("probing for conduit method from DT.\n");
-
-	if (of_property_read_string(np, "method", &method)) {
-		pr_warn("missing \"method\" property\n");
-		return -ENXIO;
-	}
-
-	if (!strcmp("hvc", method)) {
-		invoke_psci_fn = __invoke_psci_fn_hvc;
-	} else if (!strcmp("smc", method)) {
-		invoke_psci_fn = __invoke_psci_fn_smc;
-	} else {
-		pr_warn("invalid \"method\" property: %s\n", method);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static void psci_sys_reset(enum reboot_mode reboot_mode, const char *cmd)
-{
-	invoke_psci_fn(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0);
-}
-
-static void psci_sys_poweroff(void)
-{
-	invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0);
-}
-
-/*
- * PSCI Function IDs for v0.2+ are well defined so use
- * standard values.
- */
-static int psci_0_2_init(struct device_node *np)
-{
-	int err, ver;
-
-	err = get_set_conduit_method(np);
-
-	if (err)
-		goto out_put_node;
-
-	ver = psci_get_version();
-
-	if (ver == PSCI_RET_NOT_SUPPORTED) {
-		/* PSCI v0.2 mandates implementation of PSCI_ID_VERSION. */
-		pr_err("PSCI firmware does not comply with the v0.2 spec.\n");
-		err = -EOPNOTSUPP;
-		goto out_put_node;
-	} else {
-		pr_info("PSCIv%d.%d detected in firmware.\n",
-				PSCI_VERSION_MAJOR(ver),
-				PSCI_VERSION_MINOR(ver));
-
-		if (PSCI_VERSION_MAJOR(ver) == 0 &&
-				PSCI_VERSION_MINOR(ver) < 2) {
-			err = -EINVAL;
-			pr_err("Conflicting PSCI version detected.\n");
-			goto out_put_node;
-		}
-	}
-
-	pr_info("Using standard PSCI v0.2 function IDs\n");
-	psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN_CPU_SUSPEND;
-	psci_ops.cpu_suspend = psci_cpu_suspend;
-
-	psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
-	psci_ops.cpu_off = psci_cpu_off;
-
-	psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN_CPU_ON;
-	psci_ops.cpu_on = psci_cpu_on;
-
-	psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN_MIGRATE;
-	psci_ops.migrate = psci_migrate;
-
-	psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN_AFFINITY_INFO;
-	psci_ops.affinity_info = psci_affinity_info;
-
-	psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] =
-		PSCI_0_2_FN_MIGRATE_INFO_TYPE;
-	psci_ops.migrate_info_type = psci_migrate_info_type;
-
-	arm_pm_restart = psci_sys_reset;
-
-	pm_power_off = psci_sys_poweroff;
-
-out_put_node:
-	of_node_put(np);
-	return err;
-}
-
-/*
- * PSCI < v0.2 get PSCI Function IDs via DT.
- */
-static int psci_0_1_init(struct device_node *np)
-{
-	u32 id;
-	int err;
-
-	err = get_set_conduit_method(np);
-
-	if (err)
-		goto out_put_node;
-
-	pr_info("Using PSCI v0.1 Function IDs from DT\n");
-
-	if (!of_property_read_u32(np, "cpu_suspend", &id)) {
-		psci_function_id[PSCI_FN_CPU_SUSPEND] = id;
-		psci_ops.cpu_suspend = psci_cpu_suspend;
-	}
-
-	if (!of_property_read_u32(np, "cpu_off", &id)) {
-		psci_function_id[PSCI_FN_CPU_OFF] = id;
-		psci_ops.cpu_off = psci_cpu_off;
-	}
-
-	if (!of_property_read_u32(np, "cpu_on", &id)) {
-		psci_function_id[PSCI_FN_CPU_ON] = id;
-		psci_ops.cpu_on = psci_cpu_on;
-	}
-
-	if (!of_property_read_u32(np, "migrate", &id)) {
-		psci_function_id[PSCI_FN_MIGRATE] = id;
-		psci_ops.migrate = psci_migrate;
-	}
-
-out_put_node:
-	of_node_put(np);
-	return err;
-}
-
-static const struct of_device_id psci_of_match[] __initconst = {
-	{ .compatible = "arm,psci", .data = psci_0_1_init},
-	{ .compatible = "arm,psci-0.2", .data = psci_0_2_init},
-	{},
-};
-
-int __init psci_init(void)
-{
-	struct device_node *np;
-	const struct of_device_id *matched_np;
-	psci_initcall_t init_fn;
-
-	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
-	if (!np)
-		return -ENODEV;
-
-	init_fn = (psci_initcall_t)matched_np->data;
-	return init_fn(np);
-}
diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c
index 28a1db4da..cb3fcaeb2 100644
--- a/arch/arm/kernel/psci_smp.c
+++ b/arch/arm/kernel/psci_smp.c
@@ -17,6 +17,8 @@
 #include <linux/smp.h>
 #include <linux/of.h>
 #include <linux/delay.h>
+#include <linux/psci.h>
+
 #include <uapi/linux/psci.h>
 
 #include <asm/psci.h>
@@ -51,25 +53,37 @@ static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (psci_ops.cpu_on)
 		return psci_ops.cpu_on(cpu_logical_map(cpu),
-				       __pa(secondary_startup));
+					virt_to_idmap(&secondary_startup));
 	return -ENODEV;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-void __ref psci_cpu_die(unsigned int cpu)
+int psci_cpu_disable(unsigned int cpu)
+{
+	/* Fail early if we don't have CPU_OFF support */
+	if (!psci_ops.cpu_off)
+		return -EOPNOTSUPP;
+
+	/* Trusted OS will deny CPU_OFF */
+	if (psci_tos_resident_on(cpu))
+		return -EPERM;
+
+	return 0;
+}
+
+void psci_cpu_die(unsigned int cpu)
 {
-       const struct psci_power_state ps = {
-               .type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
-       };
+	u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN <<
+		    PSCI_0_2_POWER_STATE_TYPE_SHIFT;
 
-       if (psci_ops.cpu_off)
-               psci_ops.cpu_off(ps);
+	if (psci_ops.cpu_off)
+		psci_ops.cpu_off(state);
 
-       /* We should never return */
-       panic("psci: cpu %d failed to shutdown\n", cpu);
+	/* We should never return */
+	panic("psci: cpu %d failed to shutdown\n", cpu);
 }
 
-int __ref psci_cpu_kill(unsigned int cpu)
+int psci_cpu_kill(unsigned int cpu)
 {
 	int err, i;
 
@@ -106,9 +120,10 @@ bool __init psci_smp_available(void)
 	return (psci_ops.cpu_on != NULL);
 }
 
-struct smp_operations __initdata psci_smp_ops = {
+const struct smp_operations psci_smp_ops __initconst = {
 	.smp_boot_secondary	= psci_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= psci_cpu_disable,
 	.cpu_die		= psci_cpu_die,
 	.cpu_kill		= psci_cpu_kill,
 #endif
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index ef9119f74..ce131ed59 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -733,8 +733,8 @@ static int vfp_set(struct task_struct *target,
 	if (ret)
 		return ret;
 
-	vfp_flush_hwstate(thread);
 	thread->vfpstate.hard = new_vfp;
+	vfp_flush_hwstate(thread);
 
 	return 0;
 }
@@ -932,18 +932,19 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
 {
 	current_thread_info()->syscall = scno;
 
-	/* Do the secure computing check first; failures should be fast. */
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
+
+	/* Do seccomp after ptrace; syscall may have changed. */
 #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
-	if (secure_computing() == -1)
+	if (secure_computing(NULL) == -1)
 		return -1;
 #else
 	/* XXX: remove this once OABI gets fixed */
-	secure_computing_strict(scno);
+	secure_computing_strict(current_thread_info()->syscall);
 #endif
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
-
+	/* Tracer or seccomp may have changed syscall. */
 	scno = current_thread_info()->syscall;
 
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c
index 38269358f..3fa867a2a 100644
--- a/arch/arm/kernel/reboot.c
+++ b/arch/arm/kernel/reboot.c
@@ -50,7 +50,7 @@ static void __soft_restart(void *addr)
 	flush_cache_all();
 
 	/* Switch to the identity mapping. */
-	phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset);
+	phys_reset = (phys_reset_t)virt_to_idmap(cpu_reset);
 	phys_reset((unsigned long)addr);
 
 	/* Should never get here. */
@@ -104,8 +104,6 @@ void machine_halt(void)
 {
 	local_irq_disable();
 	smp_send_stop();
-
-	local_irq_disable();
 	while (1);
 }
 
@@ -150,6 +148,5 @@ void machine_restart(char *cmd)
 
 	/* Whoops - the platform was unable to reboot. Tell the user! */
 	printk("Reboot failed -- System halted\n");
-	local_irq_disable();
 	while (1);
 }
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 36c18b73c..df7f2a75e 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/stddef.h>
@@ -18,7 +19,6 @@
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
 #include <linux/screen_info.h>
-#include <linux/of_iommu.h>
 #include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
@@ -31,12 +31,16 @@
 #include <linux/bug.h>
 #include <linux/compiler.h>
 #include <linux/sort.h>
+#include <linux/psci.h>
 
 #include <asm/unified.h>
 #include <asm/cp15.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
+#include <asm/efi.h>
 #include <asm/elf.h>
+#include <asm/early_ioremap.h>
+#include <asm/fixmap.h>
 #include <asm/procinfo.h>
 #include <asm/psci.h>
 #include <asm/sections.h>
@@ -171,13 +175,13 @@ static struct resource mem_res[] = {
 		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	},
 	{
 		.name = "Kernel data",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	}
 };
 
@@ -373,6 +377,74 @@ void __init early_print(const char *str, ...)
 	printk("%s", buf);
 }
 
+#ifdef CONFIG_ARM_PATCH_IDIV
+
+static inline u32 __attribute_const__ sdiv_instruction(void)
+{
+	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
+		/* "sdiv r0, r0, r1" */
+		u32 insn = __opcode_thumb32_compose(0xfb90, 0xf0f1);
+		return __opcode_to_mem_thumb32(insn);
+	}
+
+	/* "sdiv r0, r0, r1" */
+	return __opcode_to_mem_arm(0xe710f110);
+}
+
+static inline u32 __attribute_const__ udiv_instruction(void)
+{
+	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
+		/* "udiv r0, r0, r1" */
+		u32 insn = __opcode_thumb32_compose(0xfbb0, 0xf0f1);
+		return __opcode_to_mem_thumb32(insn);
+	}
+
+	/* "udiv r0, r0, r1" */
+	return __opcode_to_mem_arm(0xe730f110);
+}
+
+static inline u32 __attribute_const__ bx_lr_instruction(void)
+{
+	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
+		/* "bx lr; nop" */
+		u32 insn = __opcode_thumb32_compose(0x4770, 0x46c0);
+		return __opcode_to_mem_thumb32(insn);
+	}
+
+	/* "bx lr" */
+	return __opcode_to_mem_arm(0xe12fff1e);
+}
+
+static void __init patch_aeabi_idiv(void)
+{
+	extern void __aeabi_uidiv(void);
+	extern void __aeabi_idiv(void);
+	uintptr_t fn_addr;
+	unsigned int mask;
+
+	mask = IS_ENABLED(CONFIG_THUMB2_KERNEL) ? HWCAP_IDIVT : HWCAP_IDIVA;
+	if (!(elf_hwcap & mask))
+		return;
+
+	pr_info("CPU: div instructions available: patching division code\n");
+
+	fn_addr = ((uintptr_t)&__aeabi_uidiv) & ~1;
+	asm ("" : "+g" (fn_addr));
+	((u32 *)fn_addr)[0] = udiv_instruction();
+	((u32 *)fn_addr)[1] = bx_lr_instruction();
+	flush_icache_range(fn_addr, fn_addr + 8);
+
+	fn_addr = ((uintptr_t)&__aeabi_idiv) & ~1;
+	asm ("" : "+g" (fn_addr));
+	((u32 *)fn_addr)[0] = sdiv_instruction();
+	((u32 *)fn_addr)[1] = bx_lr_instruction();
+	flush_icache_range(fn_addr, fn_addr + 8);
+}
+
+#else
+static inline void patch_aeabi_idiv(void) { }
+#endif
+
 static void __init cpuid_init_hwcaps(void)
 {
 	int block;
@@ -439,7 +511,7 @@ static void __init elf_hwcap_fixup(void)
 	 */
 	if (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) > 1 ||
 	    (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) == 1 &&
-	     cpuid_feature_extract(CPUID_EXT_ISAR3, 20) >= 3))
+	     cpuid_feature_extract(CPUID_EXT_ISAR4, 20) >= 3))
 		elf_hwcap &= ~HWCAP_SWP;
 }
 
@@ -640,6 +712,7 @@ static void __init setup_processor(void)
 	elf_hwcap = list->elf_hwcap;
 
 	cpuid_init_hwcaps();
+	patch_aeabi_idiv();
 
 #ifndef CONFIG_ARM_THUMB
 	elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
@@ -770,16 +843,35 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 	struct resource *res;
 
 	kernel_code.start   = virt_to_phys(_text);
-	kernel_code.end     = virt_to_phys(_etext - 1);
+	kernel_code.end     = virt_to_phys(__init_begin - 1);
 	kernel_data.start   = virt_to_phys(_sdata);
 	kernel_data.end     = virt_to_phys(_end - 1);
 
 	for_each_memblock(memory, region) {
+		phys_addr_t start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
+		phys_addr_t end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
+		unsigned long boot_alias_start;
+
+		/*
+		 * Some systems have a special memory alias which is only
+		 * used for booting.  We need to advertise this region to
+		 * kexec-tools so they know where bootable RAM is located.
+		 */
+		boot_alias_start = phys_to_idmap(start);
+		if (arm_has_idmap_alias() && boot_alias_start != IDMAP_INVALID_ADDR) {
+			res = memblock_virt_alloc(sizeof(*res), 0);
+			res->name = "System RAM (boot alias)";
+			res->start = boot_alias_start;
+			res->end = phys_to_idmap(end);
+			res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+			request_resource(&iomem_resource, res);
+		}
+
 		res = memblock_virt_alloc(sizeof(*res), 0);
 		res->name  = "System RAM";
-		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
-		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		res->start = start;
+		res->end = end;
+		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
 		request_resource(&iomem_resource, res);
 
@@ -809,7 +901,8 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 		request_resource(&ioport_resource, &lp2);
 }
 
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) || \
+    defined(CONFIG_EFI)
 struct screen_info screen_info = {
  .orig_video_lines	= 30,
  .orig_video_cols	= 80,
@@ -828,14 +921,9 @@ static int __init customize_machine(void)
 	 * machine from the device tree, if no callback is provided,
 	 * otherwise we would always need an init_machine callback.
 	 */
-	of_iommu_init();
 	if (machine_desc->init_machine)
 		machine_desc->init_machine();
-#ifdef CONFIG_OF
-	else
-		of_platform_populate(NULL, of_default_bus_match_table,
-					NULL, NULL);
-#endif
+
 	return 0;
 }
 arch_initcall(customize_machine);
@@ -866,6 +954,12 @@ static int __init init_machine_late(void)
 late_initcall(init_machine_late);
 
 #ifdef CONFIG_KEXEC
+/*
+ * The crash region must be aligned to 128MB to avoid
+ * zImage relocating below the reserved region.
+ */
+#define CRASH_ALIGN	(128 << 20)
+
 static inline unsigned long long get_total_mem(void)
 {
 	unsigned long total;
@@ -893,6 +987,26 @@ static void __init reserve_crashkernel(void)
 	if (ret)
 		return;
 
+	if (crash_base <= 0) {
+		unsigned long long crash_max = idmap_to_phys((u32)~0);
+		crash_base = memblock_find_in_range(CRASH_ALIGN, crash_max,
+						    crash_size, CRASH_ALIGN);
+		if (!crash_base) {
+			pr_err("crashkernel reservation failed - No suitable area found.\n");
+			return;
+		}
+	} else {
+		unsigned long long start;
+
+		start = memblock_find_in_range(crash_base,
+					       crash_base + crash_size,
+					       crash_size, SECTION_SIZE);
+		if (start != crash_base) {
+			pr_err("crashkernel reservation failed - memory is in use.\n");
+			return;
+		}
+	}
+
 	ret = memblock_reserve(crash_base, crash_size);
 	if (ret < 0) {
 		pr_warn("crashkernel reservation failed - memory is in use (0x%lx)\n",
@@ -905,9 +1019,25 @@ static void __init reserve_crashkernel(void)
 		(unsigned long)(crash_base >> 20),
 		(unsigned long)(total_mem >> 20));
 
+	/* The crashk resource must always be located in normal mem */
 	crashk_res.start = crash_base;
 	crashk_res.end = crash_base + crash_size - 1;
 	insert_resource(&iomem_resource, &crashk_res);
+
+	if (arm_has_idmap_alias()) {
+		/*
+		 * If we have a special RAM alias for use at boot, we
+		 * need to advertise to kexec tools where the alias is.
+		 */
+		static struct resource crashk_boot_res = {
+			.name = "Crash kernel (boot alias)",
+			.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+		};
+
+		crashk_boot_res.start = phys_to_idmap(crash_base);
+		crashk_boot_res.end = crashk_boot_res.start + crash_size - 1;
+		insert_resource(&iomem_resource, &crashk_boot_res);
+	}
 }
 #else
 static inline void reserve_crashkernel(void) {}
@@ -954,15 +1084,22 @@ void __init setup_arch(char **cmdline_p)
 	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = cmd_line;
 
+	early_fixmap_init();
+	early_ioremap_init();
+
 	parse_early_param();
 
 #ifdef CONFIG_MMU
 	early_paging_init(mdesc);
 #endif
 	setup_dma_zone(mdesc);
+	xen_early_init();
+	efi_init();
 	sanity_check_meminfo();
 	arm_memblock_init(mdesc);
 
+	early_ioremap_reset();
+
 	paging_init(mdesc);
 	request_standard_resources(mdesc);
 
@@ -972,8 +1109,7 @@ void __init setup_arch(char **cmdline_p)
 	unflatten_device_tree();
 
 	arm_dt_init_cpu_maps();
-	psci_init();
-	xen_early_init();
+	psci_dt_init();
 #ifdef CONFIG_SMP
 	if (is_smp()) {
 		if (!mdesc->smp_init || !mdesc->smp_init()) {
@@ -1015,7 +1151,7 @@ static int __init topology_init(void)
 
 	for_each_possible_cpu(cpu) {
 		struct cpuinfo_arm *cpuinfo = &per_cpu(cpu_data, cpu);
-		cpuinfo->cpu.hotpluggable = 1;
+		cpuinfo->cpu.hotpluggable = platform_can_hotplug_cpu(cpu);
 		register_cpu(&cpuinfo->cpu, cpu);
 	}
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 423663e23..7b8f21414 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -343,15 +343,18 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
 		 */
 		thumb = handler & 1;
 
-#if __LINUX_ARM_ARCH__ >= 7
 		/*
-		 * Clear the If-Then Thumb-2 execution state
-		 * ARM spec requires this to be all 000s in ARM mode
-		 * Snapdragon S4/Krait misbehaves on a Thumb=>ARM
-		 * signal transition without this.
+		 * Clear the If-Then Thumb-2 execution state.  ARM spec
+		 * requires this to be all 000s in ARM mode.  Snapdragon
+		 * S4/Krait misbehaves on a Thumb=>ARM signal transition
+		 * without this.
+		 *
+		 * We must do this whenever we are running on a Thumb-2
+		 * capable CPU, which includes ARMv6T2.  However, we elect
+		 * to always do this to simplify the code; this field is
+		 * marked UNK/SBZP for older architectures.
 		 */
 		cpsr &= ~PSR_IT_MASK;
-#endif
 
 		if (thumb) {
 			cpsr |= PSR_T_BIT;
@@ -562,6 +565,12 @@ static int do_signal(struct pt_regs *regs, int syscall)
 asmlinkage int
 do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 {
+	/*
+	 * The assembly code enters us with IRQs off, but it hasn't
+	 * informed the tracing code of that for efficiency reasons.
+	 * Update the trace code with the current status.
+	 */
+	trace_hardirqs_off();
 	do {
 		if (likely(thread_flags & _TIF_NEED_RESCHED)) {
 			schedule();
diff --git a/arch/arm/kernel/smccc-call.S b/arch/arm/kernel/smccc-call.S
new file mode 100644
index 000000000..2e48b674a
--- /dev/null
+++ b/arch/arm/kernel/smccc-call.S
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/linkage.h>
+
+#include <asm/opcodes-sec.h>
+#include <asm/opcodes-virt.h>
+#include <asm/unwind.h>
+
+	/*
+	 * Wrap c macros in asm macros to delay expansion until after the
+	 * SMCCC asm macro is expanded.
+	 */
+	.macro SMCCC_SMC
+	__SMC(0)
+	.endm
+
+	.macro SMCCC_HVC
+	__HVC(0)
+	.endm
+
+	.macro SMCCC instr
+UNWIND(	.fnstart)
+	mov	r12, sp
+	push	{r4-r7}
+UNWIND(	.save	{r4-r7})
+	ldm	r12, {r4-r7}
+	\instr
+	pop	{r4-r7}
+	ldr	r12, [sp, #(4 * 4)]
+	stm	r12, {r0-r3}
+	bx	lr
+UNWIND(	.fnend)
+	.endm
+
+/*
+ * void smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ */
+ENTRY(arm_smccc_smc)
+	SMCCC SMCCC_SMC
+ENDPROC(arm_smccc_smc)
+
+/*
+ * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ */
+ENTRY(arm_smccc_hvc)
+	SMCCC SMCCC_HVC
+ENDPROC(arm_smccc_hvc)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 3d6b7821c..861521606 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -21,6 +21,7 @@
 #include <linux/cpu.h>
 #include <linux/seq_file.h>
 #include <linux/irq.h>
+#include <linux/nmi.h>
 #include <linux/percpu.h>
 #include <linux/clockchips.h>
 #include <linux/completion.h>
@@ -68,17 +69,22 @@ enum ipi_msg_type {
 	IPI_TIMER,
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
-	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP,
 	IPI_IRQ_WORK,
 	IPI_COMPLETION,
+	IPI_CPU_BACKTRACE,
+	/*
+	 * SGI8-15 can be reserved by secure firmware, and thus may
+	 * not be usable by the kernel. Please keep the above limited
+	 * to at most 8 entries.
+	 */
 };
 
 static DECLARE_COMPLETION(cpu_running);
 
 static struct smp_operations smp_ops;
 
-void __init smp_set_ops(struct smp_operations *ops)
+void __init smp_set_ops(const struct smp_operations *ops)
 {
 	if (ops)
 		smp_ops = *ops;
@@ -175,13 +181,26 @@ static int platform_cpu_disable(unsigned int cpu)
 	if (smp_ops.cpu_disable)
 		return smp_ops.cpu_disable(cpu);
 
+	return 0;
+}
+
+int platform_can_hotplug_cpu(unsigned int cpu)
+{
+	/* cpu_die must be specified to support hotplug */
+	if (!smp_ops.cpu_die)
+		return 0;
+
+	if (smp_ops.cpu_can_disable)
+		return smp_ops.cpu_can_disable(cpu);
+
 	/*
 	 * By default, allow disabling all CPUs except the first one,
 	 * since this is special on a lot of platforms, e.g. because
 	 * of clock tick interrupts.
 	 */
-	return cpu == 0 ? -EPERM : 0;
+	return cpu != 0;
 }
+
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
@@ -253,7 +272,7 @@ void __cpu_die(unsigned int cpu)
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void __ref cpu_die(void)
+void arch_cpu_idle_dead(void)
 {
 	unsigned int cpu = smp_processor_id();
 
@@ -385,11 +404,12 @@ asmlinkage void secondary_start_kernel(void)
 
 	local_irq_enable();
 	local_fiq_enable();
+	local_abt_enable();
 
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -459,7 +479,6 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
 	S(IPI_TIMER, "Timer broadcast interrupts"),
 	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
 	S(IPI_CALL_FUNC, "Function call interrupts"),
-	S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"),
 	S(IPI_CPU_STOP, "CPU stop interrupts"),
 	S(IPI_IRQ_WORK, "IRQ work interrupts"),
 	S(IPI_COMPLETION, "completion interrupts"),
@@ -467,7 +486,7 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
 
 static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
 {
-	trace_ipi_raise(target, ipi_types[ipinr]);
+	trace_ipi_raise_rcuidle(target, ipi_types[ipinr]);
 	__smp_cross_call(target, ipinr);
 }
 
@@ -509,7 +528,7 @@ void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
+	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC);
 }
 
 #ifdef CONFIG_IRQ_WORK
@@ -604,12 +623,6 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		irq_exit();
 		break;
 
-	case IPI_CALL_FUNC_SINGLE:
-		irq_enter();
-		generic_smp_call_function_single_interrupt();
-		irq_exit();
-		break;
-
 	case IPI_CPU_STOP:
 		irq_enter();
 		ipi_cpu_stop(cpu);
@@ -630,6 +643,14 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		irq_exit();
 		break;
 
+	case IPI_CPU_BACKTRACE:
+		printk_nmi_enter();
+		irq_enter();
+		nmi_cpu_backtrace(regs);
+		irq_exit();
+		printk_nmi_exit();
+		break;
+
 	default:
 		pr_crit("CPU%u: Unknown IPI message 0x%x\n",
 		        cpu, ipinr);
@@ -724,3 +745,22 @@ static int __init register_cpufreq_notifier(void)
 core_initcall(register_cpufreq_notifier);
 
 #endif
+
+static void raise_nmi(cpumask_t *mask)
+{
+	/*
+	 * Generate the backtrace directly if we are running in a calling
+	 * context that is not preemptible by the backtrace IPI. Note
+	 * that nmi_cpu_backtrace() automatically removes the current cpu
+	 * from mask.
+	 */
+	if (cpumask_test_cpu(smp_processor_id(), mask) && irqs_disabled())
+		nmi_cpu_backtrace(NULL);
+
+	smp_cross_call(mask, IPI_CPU_BACKTRACE);
+}
+
+void arch_trigger_all_cpu_backtrace(bool include_self)
+{
+	nmi_trigger_all_cpu_backtrace(include_self, raise_nmi);
+}
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index 2e72be4f6..22313cb53 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -93,17 +93,53 @@ void erratum_a15_798181_init(void)
 	unsigned int revidr = read_cpuid(CPUID_REVIDR);
 
 	/* Brahma-B15 r0p0..r0p2 affected
-	 * Cortex-A15 r0p0..r3p2 w/o ECO fix affected */
-	if ((midr & 0xff0ffff0) == 0x420f00f0 && midr <= 0x420f00f2)
+	 * Cortex-A15 r0p0..r3p3 w/o ECO fix affected
+	 * Fixes applied to A15 with respect to the revision and revidr are:
+	 *
+	 * r0p0-r2p1: No fixes applied
+	 * r2p2,r2p3:
+	 *	REVIDR[4]: 798181 Moving a virtual page that is being accessed
+	 *		   by an active process can lead to unexpected behavior
+	 *	REVIDR[9]: Not defined
+	 * r2p4,r3p0,r3p1,r3p2:
+	 *	REVIDR[4]: 798181 Moving a virtual page that is being accessed
+	 *		   by an active process can lead to unexpected behavior
+	 *	REVIDR[9]: 798181 Moving a virtual page that is being accessed
+	 *		   by an active process can lead to unexpected behavior
+	 *		   - This is an update to a previously released ECO.
+	 * r3p3:
+	 *	REVIDR[4]: Reserved
+	 *	REVIDR[9]: 798181 Moving a virtual page that is being accessed
+	 *		   by an active process can lead to unexpected behavior
+	 *		   - This is an update to a previously released ECO.
+	 *
+	 * Handling:
+	 *	REVIDR[9] set -> No WA
+	 *	REVIDR[4] set, REVIDR[9] cleared -> Partial WA
+	 *	Both cleared -> Full WA
+	 */
+	if ((midr & 0xff0ffff0) == 0x420f00f0 && midr <= 0x420f00f2) {
 		erratum_a15_798181_handler = erratum_a15_798181_broadcast;
-	else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr <= 0x413fc0f2 &&
-		 (revidr & 0x210) != 0x210) {
+	} else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x412fc0f2) {
+		erratum_a15_798181_handler = erratum_a15_798181_broadcast;
+	} else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x412fc0f4) {
 		if (revidr & 0x10)
 			erratum_a15_798181_handler =
 				erratum_a15_798181_partial;
 		else
 			erratum_a15_798181_handler =
 				erratum_a15_798181_broadcast;
+	} else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x413fc0f3) {
+		if ((revidr & 0x210) == 0)
+			erratum_a15_798181_handler =
+				erratum_a15_798181_broadcast;
+		else if (revidr & 0x10)
+			erratum_a15_798181_handler =
+				erratum_a15_798181_partial;
+	} else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x414fc0f0) {
+		if ((revidr & 0x200) == 0)
+			erratum_a15_798181_handler =
+				erratum_a15_798181_partial;
 	}
 }
 #endif
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 172c6a05d..02d5e5e8d 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -23,7 +23,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 
-#include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
 
 /* set up by the platform code */
@@ -34,31 +33,34 @@ static unsigned long twd_timer_rate;
 static DEFINE_PER_CPU(bool, percpu_setup_called);
 
 static struct clock_event_device __percpu *twd_evt;
+static unsigned int twd_features =
+		CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 static int twd_ppi;
 
-static void twd_set_mode(enum clock_event_mode mode,
-			struct clock_event_device *clk)
+static int twd_shutdown(struct clock_event_device *clk)
 {
-	unsigned long ctrl;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
-			| TWD_TIMER_CONTROL_PERIODIC;
-		writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
-			twd_base + TWD_TIMER_LOAD);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
+	writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
+	return 0;
+}
+
+static int twd_set_oneshot(struct clock_event_device *clk)
+{
+	/* period set, and timer enabled in 'next_event' hook */
+	writel_relaxed(TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT,
+		       twd_base + TWD_TIMER_CONTROL);
+	return 0;
+}
+
+static int twd_set_periodic(struct clock_event_device *clk)
+{
+	unsigned long ctrl = TWD_TIMER_CONTROL_ENABLE |
+			     TWD_TIMER_CONTROL_IT_ENABLE |
+			     TWD_TIMER_CONTROL_PERIODIC;
 
+	writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+		       twd_base + TWD_TIMER_LOAD);
 	writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL);
+	return 0;
 }
 
 static int twd_set_next_event(unsigned long evt,
@@ -94,7 +96,7 @@ static void twd_timer_stop(void)
 {
 	struct clock_event_device *clk = raw_cpu_ptr(twd_evt);
 
-	twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+	twd_shutdown(clk);
 	disable_percpu_irq(clk->irq);
 }
 
@@ -293,10 +295,12 @@ static void twd_timer_setup(void)
 	writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
 
 	clk->name = "local_timer";
-	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
-			CLOCK_EVT_FEAT_C3STOP;
+	clk->features = twd_features;
 	clk->rating = 350;
-	clk->set_mode = twd_set_mode;
+	clk->set_state_shutdown = twd_shutdown;
+	clk->set_state_periodic = twd_set_periodic;
+	clk->set_state_oneshot = twd_set_oneshot;
+	clk->tick_resume = twd_shutdown;
 	clk->set_next_event = twd_set_next_event;
 	clk->irq = twd_ppi;
 	clk->cpumask = cpumask_of(cpu);
@@ -306,24 +310,17 @@ static void twd_timer_setup(void)
 	enable_percpu_irq(clk->irq, 0);
 }
 
-static int twd_timer_cpu_notify(struct notifier_block *self,
-				unsigned long action, void *hcpu)
+static int twd_timer_starting_cpu(unsigned int cpu)
 {
-	switch (action & ~CPU_TASKS_FROZEN) {
-	case CPU_STARTING:
-		twd_timer_setup();
-		break;
-	case CPU_DYING:
-		twd_timer_stop();
-		break;
-	}
-
-	return NOTIFY_OK;
+	twd_timer_setup();
+	return 0;
 }
 
-static struct notifier_block twd_timer_cpu_nb = {
-	.notifier_call = twd_timer_cpu_notify,
-};
+static int twd_timer_dying_cpu(unsigned int cpu)
+{
+	twd_timer_stop();
+	return 0;
+}
 
 static int __init twd_local_timer_common_register(struct device_node *np)
 {
@@ -341,11 +338,13 @@ static int __init twd_local_timer_common_register(struct device_node *np)
 		goto out_free;
 	}
 
-	err = register_cpu_notifier(&twd_timer_cpu_nb);
-	if (err)
-		goto out_irq;
+	cpuhp_setup_state_nocalls(CPUHP_AP_ARM_TWD_STARTING,
+				  "AP_ARM_TWD_STARTING",
+				  twd_timer_starting_cpu, twd_timer_dying_cpu);
 
 	twd_get_clock(np);
+	if (!of_property_read_bool(np, "always-on"))
+		twd_features |= CLOCK_EVT_FEAT_C3STOP;
 
 	/*
 	 * Immediately configure the timer on the boot CPU, unless we need
@@ -359,8 +358,6 @@ static int __init twd_local_timer_common_register(struct device_node *np)
 
 	return 0;
 
-out_irq:
-	free_percpu_irq(twd_ppi, twd_evt);
 out_free:
 	iounmap(twd_base);
 	twd_base = NULL;
@@ -384,13 +381,10 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt)
 }
 
 #ifdef CONFIG_OF
-static void __init twd_local_timer_of_register(struct device_node *np)
+static int __init twd_local_timer_of_register(struct device_node *np)
 {
 	int err;
 
-	if (!is_smp() || !setup_max_cpus)
-		return;
-
 	twd_ppi = irq_of_parse_and_map(np, 0);
 	if (!twd_ppi) {
 		err = -EINVAL;
@@ -407,6 +401,7 @@ static void __init twd_local_timer_of_register(struct device_node *np)
 
 out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
+	return err;
 }
 CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
 CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 136175678..c3fe769d7 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -36,10 +36,10 @@
  */
 #define __user_swpX_asm(data, addr, res, temp, B)		\
 	__asm__ __volatile__(					\
-	"	mov		%2, %1\n"			\
-	"0:	ldrex"B"	%1, [%3]\n"			\
-	"1:	strex"B"	%0, %2, [%3]\n"			\
+	"0:	ldrex"B"	%2, [%3]\n"			\
+	"1:	strex"B"	%0, %1, [%3]\n"			\
 	"	cmp		%0, #0\n"			\
+	"	moveq		%1, %2\n"			\
 	"	movne		%0, %4\n"			\
 	"2:\n"							\
 	"	.section	 .text.fixup,\"ax\"\n"		\
@@ -141,11 +141,14 @@ static int emulate_swpX(unsigned int address, unsigned int *data,
 
 	while (1) {
 		unsigned long temp;
+		unsigned int __ua_flags;
 
+		__ua_flags = uaccess_save_and_enable();
 		if (type == TYPE_SWPB)
 			__user_swpb_asm(*data, address, res, temp);
 		else
 			__user_swp_asm(*data, address, res, temp);
+		uaccess_restore(__ua_flags);
 
 		if (likely(res != -EAGAIN) || signal_pending(current))
 			break;
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index b83f3b773..5f221acd2 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -193,15 +193,44 @@ struct oabi_flock64 {
 	pid_t	l_pid;
 } __attribute__ ((packed,aligned(4)));
 
-asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
+static long do_locks(unsigned int fd, unsigned int cmd,
 				 unsigned long arg)
 {
-	struct oabi_flock64 user;
 	struct flock64 kernel;
-	mm_segment_t fs = USER_DS; /* initialized to kill a warning */
-	unsigned long local_arg = arg;
-	int ret;
+	struct oabi_flock64 user;
+	mm_segment_t fs;
+	long ret;
+
+	if (copy_from_user(&user, (struct oabi_flock64 __user *)arg,
+			   sizeof(user)))
+		return -EFAULT;
+	kernel.l_type	= user.l_type;
+	kernel.l_whence	= user.l_whence;
+	kernel.l_start	= user.l_start;
+	kernel.l_len	= user.l_len;
+	kernel.l_pid	= user.l_pid;
+
+	fs = get_fs();
+	set_fs(KERNEL_DS);
+	ret = sys_fcntl64(fd, cmd, (unsigned long)&kernel);
+	set_fs(fs);
+
+	if (!ret && (cmd == F_GETLK64 || cmd == F_OFD_GETLK)) {
+		user.l_type	= kernel.l_type;
+		user.l_whence	= kernel.l_whence;
+		user.l_start	= kernel.l_start;
+		user.l_len	= kernel.l_len;
+		user.l_pid	= kernel.l_pid;
+		if (copy_to_user((struct oabi_flock64 __user *)arg,
+				 &user, sizeof(user)))
+			ret = -EFAULT;
+	}
+	return ret;
+}
 
+asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
+				 unsigned long arg)
+{
 	switch (cmd) {
 	case F_OFD_GETLK:
 	case F_OFD_SETLK:
@@ -209,39 +238,11 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
 	case F_GETLK64:
 	case F_SETLK64:
 	case F_SETLKW64:
-		if (copy_from_user(&user, (struct oabi_flock64 __user *)arg,
-				   sizeof(user)))
-			return -EFAULT;
-		kernel.l_type	= user.l_type;
-		kernel.l_whence	= user.l_whence;
-		kernel.l_start	= user.l_start;
-		kernel.l_len	= user.l_len;
-		kernel.l_pid	= user.l_pid;
-		local_arg = (unsigned long)&kernel;
-		fs = get_fs();
-		set_fs(KERNEL_DS);
-	}
+		return do_locks(fd, cmd, arg);
 
-	ret = sys_fcntl64(fd, cmd, local_arg);
-
-	switch (cmd) {
-	case F_GETLK64:
-		if (!ret) {
-			user.l_type	= kernel.l_type;
-			user.l_whence	= kernel.l_whence;
-			user.l_start	= kernel.l_start;
-			user.l_len	= kernel.l_len;
-			user.l_pid	= kernel.l_pid;
-			if (copy_to_user((struct oabi_flock64 __user *)arg,
-					 &user, sizeof(user)))
-				ret = -EFAULT;
-		}
-	case F_SETLK64:
-	case F_SETLKW64:
-		set_fs(fs);
+	default:
+		return sys_fcntl64(fd, cmd, arg);
 	}
-
-	return ret;
 }
 
 struct oabi_epoll_event {
@@ -278,8 +279,12 @@ asmlinkage long sys_oabi_epoll_wait(int epfd,
 	mm_segment_t fs;
 	long ret, err, i;
 
-	if (maxevents <= 0 || maxevents > (INT_MAX/sizeof(struct epoll_event)))
+	if (maxevents <= 0 ||
+			maxevents > (INT_MAX/sizeof(*kbuf)) ||
+			maxevents > (INT_MAX/sizeof(*events)))
 		return -EINVAL;
+	if (!access_ok(VERIFY_WRITE, events, sizeof(*events) * maxevents))
+		return -EFAULT;
 	kbuf = kmalloc(sizeof(*kbuf) * maxevents, GFP_KERNEL);
 	if (!kbuf)
 		return -ENOMEM;
@@ -316,6 +321,8 @@ asmlinkage long sys_oabi_semtimedop(int semid,
 
 	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
+	if (!access_ok(VERIFY_READ, tsops, sizeof(*tsops) * nsops))
+		return -EFAULT;
 	sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
 	if (!sops)
 		return -ENOMEM;
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index a66e37e21..97b22fa7c 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -120,6 +120,6 @@ void __init time_init(void)
 #ifdef CONFIG_COMMON_CLK
 		of_clk_init(NULL);
 #endif
-		clocksource_of_init();
+		clocksource_probe();
 	}
 }
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 08b7847bf..ec279d161 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -40,7 +40,7 @@
  * to run the rebalance_domains for all idle cores and the cpu_capacity can be
  * updated during this sequence.
  */
-static DEFINE_PER_CPU(unsigned long, cpu_scale);
+static DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE;
 
 unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu)
 {
@@ -306,8 +306,6 @@ void __init init_cpu_topology(void)
 		cpu_topo->socket_id = -1;
 		cpumask_clear(&cpu_topo->core_sibling);
 		cpumask_clear(&cpu_topo->thread_sibling);
-
-		set_capacity_scale(cpu, SCHED_CAPACITY_SCALE);
 	}
 	smp_wmb();
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index d35822623..bc698383e 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -625,58 +625,6 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		set_tls(regs->ARM_r0);
 		return 0;
 
-#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
-	/*
-	 * Atomically store r1 in *r2 if *r2 is equal to r0 for user space.
-	 * Return zero in r0 if *MEM was changed or non-zero if no exchange
-	 * happened.  Also set the user C flag accordingly.
-	 * If access permissions have to be fixed up then non-zero is
-	 * returned and the operation has to be re-attempted.
-	 *
-	 * *NOTE*: This is a ghost syscall private to the kernel.  Only the
-	 * __kuser_cmpxchg code in entry-armv.S should be aware of its
-	 * existence.  Don't ever use this from user code.
-	 */
-	case NR(cmpxchg):
-	for (;;) {
-		extern void do_DataAbort(unsigned long addr, unsigned int fsr,
-					 struct pt_regs *regs);
-		unsigned long val;
-		unsigned long addr = regs->ARM_r2;
-		struct mm_struct *mm = current->mm;
-		pgd_t *pgd; pmd_t *pmd; pte_t *pte;
-		spinlock_t *ptl;
-
-		regs->ARM_cpsr &= ~PSR_C_BIT;
-		down_read(&mm->mmap_sem);
-		pgd = pgd_offset(mm, addr);
-		if (!pgd_present(*pgd))
-			goto bad_access;
-		pmd = pmd_offset(pgd, addr);
-		if (!pmd_present(*pmd))
-			goto bad_access;
-		pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
-		if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
-			pte_unmap_unlock(pte, ptl);
-			goto bad_access;
-		}
-		val = *(unsigned long *)addr;
-		val -= regs->ARM_r0;
-		if (val == 0) {
-			*(unsigned long *)addr = regs->ARM_r1;
-			regs->ARM_cpsr |= PSR_C_BIT;
-		}
-		pte_unmap_unlock(pte, ptl);
-		up_read(&mm->mmap_sem);
-		return val;
-
-		bad_access:
-		up_read(&mm->mmap_sem);
-		/* simulate a write access fault */
-		do_DataAbort(addr, 15 + (1 << 11), regs);
-	}
-#endif
-
 	default:
 		/* Calls 9f00xx..9f07ff are defined to return -ENOSYS
 		   if not implemented, rather than raising SIGILL.  This
@@ -870,7 +818,6 @@ void __init early_trap_init(void *vectors_base)
 	kuser_init(vectors_base);
 
 	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
-	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
 #else /* ifndef CONFIG_CPU_V7M */
 	/*
 	 * on V7-M there is no need to copy the vector table to a dedicated
diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c
index 54a5aeab9..994e971a8 100644
--- a/arch/arm/kernel/vdso.c
+++ b/arch/arm/kernel/vdso.c
@@ -224,7 +224,7 @@ static int install_vvar(struct mm_struct *mm, unsigned long addr)
 				       VM_READ | VM_MAYREAD,
 				       &vdso_data_mapping);
 
-	return IS_ERR(vma) ? PTR_ERR(vma) : 0;
+	return PTR_ERR_OR_ZERO(vma);
 }
 
 /* assumes mmap_sem is write-locked */
diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
new file mode 100644
index 000000000..cba1ec899
--- /dev/null
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -0,0 +1,316 @@
+/* ld script to make ARM Linux kernel
+ * taken from the i386 version by Russell King
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+
+#define PROC_INFO							\
+	. = ALIGN(4);							\
+	VMLINUX_SYMBOL(__proc_info_begin) = .;				\
+	*(.proc.info.init)						\
+	VMLINUX_SYMBOL(__proc_info_end) = .;
+
+#define IDMAP_TEXT							\
+	ALIGN_FUNCTION();						\
+	VMLINUX_SYMBOL(__idmap_text_start) = .;				\
+	*(.idmap.text)							\
+	VMLINUX_SYMBOL(__idmap_text_end) = .;				\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__hyp_idmap_text_start) = .;			\
+	*(.hyp.idmap.text)						\
+	VMLINUX_SYMBOL(__hyp_idmap_text_end) = .;
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define ARM_CPU_DISCARD(x)
+#define ARM_CPU_KEEP(x)		x
+#else
+#define ARM_CPU_DISCARD(x)	x
+#define ARM_CPU_KEEP(x)
+#endif
+
+#if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \
+	defined(CONFIG_GENERIC_BUG)
+#define ARM_EXIT_KEEP(x)	x
+#define ARM_EXIT_DISCARD(x)
+#else
+#define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
+#endif
+
+OUTPUT_ARCH(arm)
+ENTRY(stext)
+
+#ifndef __ARMEB__
+jiffies = jiffies_64;
+#else
+jiffies = jiffies_64 + 4;
+#endif
+
+SECTIONS
+{
+	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
+	 * unwind exit sections must be discarded before the rest of the
+	 * unwind sections get included.
+	 */
+	/DISCARD/ : {
+		*(.ARM.exidx.exit.text)
+		*(.ARM.extab.exit.text)
+		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
+		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
+#ifndef CONFIG_MMU
+		*(.text.fixup)
+		*(__ex_table)
+#endif
+#ifndef CONFIG_SMP_ON_UP
+		*(.alt.smp.init)
+#endif
+		*(.discard)
+		*(.discard.*)
+	}
+
+	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
+	_xiprom = .;			/* XIP ROM area to be mapped */
+
+	.head.text : {
+		_text = .;
+		HEAD_TEXT
+	}
+
+	.text : {			/* Real text segment		*/
+		_stext = .;		/* Text and read-only data	*/
+			IDMAP_TEXT
+			__exception_text_start = .;
+			*(.exception.text)
+			__exception_text_end = .;
+			IRQENTRY_TEXT
+			TEXT_TEXT
+			SCHED_TEXT
+			LOCK_TEXT
+			KPROBES_TEXT
+			*(.gnu.warning)
+			*(.glue_7)
+			*(.glue_7t)
+		. = ALIGN(4);
+		*(.got)			/* Global offset table		*/
+			ARM_CPU_KEEP(PROC_INFO)
+	}
+
+	RO_DATA(PAGE_SIZE)
+
+	. = ALIGN(4);
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+		__start___ex_table = .;
+#ifdef CONFIG_MMU
+		*(__ex_table)
+#endif
+		__stop___ex_table = .;
+	}
+
+#ifdef CONFIG_ARM_UNWIND
+	/*
+	 * Stack unwinding tables
+	 */
+	. = ALIGN(8);
+	.ARM.unwind_idx : {
+		__start_unwind_idx = .;
+		*(.ARM.exidx*)
+		__stop_unwind_idx = .;
+	}
+	.ARM.unwind_tab : {
+		__start_unwind_tab = .;
+		*(.ARM.extab*)
+		__stop_unwind_tab = .;
+	}
+#endif
+
+	NOTES
+
+	_etext = .;			/* End of text and rodata section */
+
+	/*
+	 * The vectors and stubs are relocatable code, and the
+	 * only thing that matters is their relative offsets
+	 */
+	__vectors_start = .;
+	.vectors 0xffff0000 : AT(__vectors_start) {
+		*(.vectors)
+	}
+	. = __vectors_start + SIZEOF(.vectors);
+	__vectors_end = .;
+
+	__stubs_start = .;
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {
+		*(.stubs)
+	}
+	. = __stubs_start + SIZEOF(.stubs);
+	__stubs_end = .;
+
+	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
+
+	INIT_TEXT_SECTION(8)
+	.exit.text : {
+		ARM_EXIT_KEEP(EXIT_TEXT)
+	}
+	.init.proc.info : {
+		ARM_CPU_DISCARD(PROC_INFO)
+	}
+	.init.arch.info : {
+		__arch_info_begin = .;
+		*(.arch.info.init)
+		__arch_info_end = .;
+	}
+	.init.tagtable : {
+		__tagtable_begin = .;
+		*(.taglist.init)
+		__tagtable_end = .;
+	}
+#ifdef CONFIG_SMP_ON_UP
+	.init.smpalt : {
+		__smpalt_begin = .;
+		*(.alt.smp.init)
+		__smpalt_end = .;
+	}
+#endif
+	.init.pv_table : {
+		__pv_table_begin = .;
+		*(.pv_table)
+		__pv_table_end = .;
+	}
+	.init.data : {
+		INIT_SETUP(16)
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+	}
+
+#ifdef CONFIG_SMP
+	PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
+
+	_exiprom = .;			/* End of XIP ROM area */
+	__data_loc = ALIGN(4);		/* location in binary */
+	. = PAGE_OFFSET + TEXT_OFFSET;
+
+	.data : AT(__data_loc) {
+		_data = .;		/* address in memory */
+		_sdata = .;
+
+		/*
+		 * first, the init task union, aligned
+		 * to an 8192 byte boundary.
+		 */
+		INIT_TASK_DATA(THREAD_SIZE)
+
+		. = ALIGN(PAGE_SIZE);
+		__init_begin = .;
+		INIT_DATA
+		ARM_EXIT_KEEP(EXIT_DATA)
+		. = ALIGN(PAGE_SIZE);
+		__init_end = .;
+
+		NOSAVE_DATA
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)
+
+		/*
+		 * and the usual data section
+		 */
+		DATA_DATA
+		CONSTRUCTORS
+
+		_edata = .;
+	}
+	_edata_loc = __data_loc + SIZEOF(.data);
+
+#ifdef CONFIG_HAVE_TCM
+        /*
+	 * We align everything to a page boundary so we can
+	 * free it after init has commenced and TCM contents have
+	 * been copied to its destination.
+	 */
+	.tcm_start : {
+		. = ALIGN(PAGE_SIZE);
+		__tcm_start = .;
+		__itcm_start = .;
+	}
+
+	/*
+	 * Link these to the ITCM RAM
+	 * Put VMA to the TCM address and LMA to the common RAM
+	 * and we'll upload the contents from RAM to TCM and free
+	 * the used RAM after that.
+	 */
+	.text_itcm ITCM_OFFSET : AT(__itcm_start)
+	{
+		__sitcm_text = .;
+		*(.tcm.text)
+		*(.tcm.rodata)
+		. = ALIGN(4);
+		__eitcm_text = .;
+	}
+
+	/*
+	 * Reset the dot pointer, this is needed to create the
+	 * relative __dtcm_start below (to be used as extern in code).
+	 */
+	. = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
+
+	.dtcm_start : {
+		__dtcm_start = .;
+	}
+
+	/* TODO: add remainder of ITCM as well, that can be used for data! */
+	.data_dtcm DTCM_OFFSET : AT(__dtcm_start)
+	{
+		. = ALIGN(4);
+		__sdtcm_data = .;
+		*(.tcm.data)
+		. = ALIGN(4);
+		__edtcm_data = .;
+	}
+
+	/* Reset the dot pointer or the linker gets confused */
+	. = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
+
+	/* End marker for freeing TCM copy in linked object */
+	.tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
+		. = ALIGN(PAGE_SIZE);
+		__tcm_end = .;
+	}
+#endif
+
+	BSS_SECTION(0, 0, 0)
+	_end = .;
+
+	STABS_DEBUG
+}
+
+/*
+ * These must never be empty
+ * If you have to comment these two assert statements out, your
+ * binutils is too old (for other reasons as well)
+ */
+ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
+ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
+
+/*
+ * The HYP init code can't be more than a page long,
+ * and should not cross a page boundary.
+ * The above comment applies as well.
+ */
+ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
+	"HYP init code too big or misaligned")
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 8b60fde5c..d24e5dd2a 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -3,14 +3,16 @@
  * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
  */
 
+#ifdef CONFIG_XIP_KERNEL
+#include "vmlinux-xip.lds.S"
+#else
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
-#ifdef CONFIG_ARM_KERNMEM_PERMS
 #include <asm/pgtable.h>
-#endif
 
 #define PROC_INFO							\
 	. = ALIGN(4);							\
@@ -18,6 +20,11 @@
 	*(.proc.info.init)						\
 	VMLINUX_SYMBOL(__proc_info_end) = .;
 
+#define HYPERVISOR_TEXT							\
+	VMLINUX_SYMBOL(__hyp_text_start) = .;				\
+	*(.hyp.text)							\
+	VMLINUX_SYMBOL(__hyp_text_end) = .;
+
 #define IDMAP_TEXT							\
 	ALIGN_FUNCTION();						\
 	VMLINUX_SYMBOL(__idmap_text_start) = .;				\
@@ -37,7 +44,7 @@
 #endif
 
 #if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \
-	defined(CONFIG_GENERIC_BUG)
+	defined(CONFIG_GENERIC_BUG) || defined(CONFIG_JUMP_LABEL)
 #define ARM_EXIT_KEEP(x)	x
 #define ARM_EXIT_DISCARD(x)
 #else
@@ -84,17 +91,13 @@ SECTIONS
 		*(.discard.*)
 	}
 
-#ifdef CONFIG_XIP_KERNEL
-	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
-#else
 	. = PAGE_OFFSET + TEXT_OFFSET;
-#endif
 	.head.text : {
 		_text = .;
 		HEAD_TEXT
 	}
 
-#ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
 	. = ALIGN(1<<SECTION_SHIFT);
 #endif
 
@@ -105,9 +108,11 @@ SECTIONS
 			*(.exception.text)
 			__exception_text_end = .;
 			IRQENTRY_TEXT
+			SOFTIRQENTRY_TEXT
 			TEXT_TEXT
 			SCHED_TEXT
 			LOCK_TEXT
+			HYPERVISOR_TEXT
 			KPROBES_TEXT
 			*(.gnu.warning)
 			*(.glue_7)
@@ -117,9 +122,11 @@ SECTIONS
 			ARM_CPU_KEEP(PROC_INFO)
 	}
 
-#ifdef CONFIG_DEBUG_RODATA
+#ifdef CONFIG_DEBUG_ALIGN_RODATA
 	. = ALIGN(1<<SECTION_SHIFT);
 #endif
+	_etext = .;			/* End of text section */
+
 	RO_DATA(PAGE_SIZE)
 
 	. = ALIGN(4);
@@ -150,34 +157,33 @@ SECTIONS
 
 	NOTES
 
-	_etext = .;			/* End of text and rodata section */
-
-#ifndef CONFIG_XIP_KERNEL
-# ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
 	. = ALIGN(1<<SECTION_SHIFT);
-# else
+#else
 	. = ALIGN(PAGE_SIZE);
-# endif
-	__init_begin = .;
 #endif
+	__init_begin = .;
+
 	/*
 	 * The vectors and stubs are relocatable code, and the
 	 * only thing that matters is their relative offsets
 	 */
 	__vectors_start = .;
-	.vectors 0 : AT(__vectors_start) {
+	.vectors 0xffff0000 : AT(__vectors_start) {
 		*(.vectors)
 	}
 	. = __vectors_start + SIZEOF(.vectors);
 	__vectors_end = .;
 
 	__stubs_start = .;
-	.stubs 0x1000 : AT(__stubs_start) {
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {
 		*(.stubs)
 	}
 	. = __stubs_start + SIZEOF(.stubs);
 	__stubs_end = .;
 
+	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
+
 	INIT_TEXT_SECTION(8)
 	.exit.text : {
 		ARM_EXIT_KEEP(EXIT_TEXT)
@@ -208,37 +214,28 @@ SECTIONS
 		__pv_table_end = .;
 	}
 	.init.data : {
-#ifndef CONFIG_XIP_KERNEL
 		INIT_DATA
-#endif
 		INIT_SETUP(16)
 		INIT_CALLS
 		CON_INITCALL
 		SECURITY_INITCALL
 		INIT_RAM_FS
 	}
-#ifndef CONFIG_XIP_KERNEL
 	.exit.data : {
 		ARM_EXIT_KEEP(EXIT_DATA)
 	}
-#endif
 
 #ifdef CONFIG_SMP
 	PERCPU_SECTION(L1_CACHE_BYTES)
 #endif
 
-#ifdef CONFIG_XIP_KERNEL
-	__data_loc = ALIGN(4);		/* location in binary */
-	. = PAGE_OFFSET + TEXT_OFFSET;
-#else
-#ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
 	. = ALIGN(1<<SECTION_SHIFT);
 #else
 	. = ALIGN(THREAD_SIZE);
 #endif
 	__init_end = .;
 	__data_loc = .;
-#endif
 
 	.data : AT(__data_loc) {
 		_data = .;		/* address in memory */
@@ -250,15 +247,6 @@ SECTIONS
 		 */
 		INIT_TASK_DATA(THREAD_SIZE)
 
-#ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(PAGE_SIZE);
-		__init_begin = .;
-		INIT_DATA
-		ARM_EXIT_KEEP(EXIT_DATA)
-		. = ALIGN(PAGE_SIZE);
-		__init_end = .;
-#endif
-
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)
@@ -336,6 +324,15 @@ SECTIONS
 	STABS_DEBUG
 }
 
+#ifdef CONFIG_DEBUG_RODATA
+/*
+ * Without CONFIG_DEBUG_ALIGN_RODATA, __start_rodata_section_aligned will
+ * be the first section-aligned location after __start_rodata. Otherwise,
+ * it will be equal to __start_rodata.
+ */
+__start_rodata_section_aligned = ALIGN(__start_rodata, 1 << SECTION_SHIFT);
+#endif
+
 /*
  * These must never be empty
  * If you have to comment these two assert statements out, your
@@ -351,3 +348,5 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
  */
 ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
 	"HYP init code too big or misaligned")
+
+#endif /* CONFIG_XIP_KERNEL */
diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c
index bdbb8853a..77a2eef72 100644
--- a/arch/arm/kernel/xscale-cp0.c
+++ b/arch/arm/kernel/xscale-cp0.c
@@ -15,6 +15,9 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <asm/thread_notify.h>
+#include <asm/cputype.h>
+
+asm("	.arch armv5te\n");
 
 static inline void dsp_save_state(u32 *state)
 {
@@ -152,6 +155,10 @@ static int __init xscale_cp0_init(void)
 {
 	u32 cp_access;
 
+	/* do not attempt to probe iwmmxt on non-xscale family CPUs */
+	if (!cpu_is_xscale_family())
+		return 0;
+
 	cp_access = xscale_cp_access_read() & ~3;
 	xscale_cp_access_write(cp_access | 1);
 
diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig
index bfb915d05..3e1cd0452 100644
--- a/arch/arm/kvm/Kconfig
+++ b/arch/arm/kvm/Kconfig
@@ -21,6 +21,7 @@ config KVM
 	depends on MMU && OF
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select ARM_GIC
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select HAVE_KVM_ARCH_TLB_FLUSH_ALL
 	select KVM_MMIO
@@ -31,6 +32,8 @@ config KVM
 	select KVM_VFIO
 	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_IRQFD
+	select HAVE_KVM_IRQCHIP
+	select HAVE_KVM_IRQ_ROUTING
 	depends on ARM_VIRT_EXT && ARM_LPAE && ARM_ARCH_TIMER
 	---help---
 	  Support hosting virtualized guest machines.
@@ -45,15 +48,6 @@ config KVM_ARM_HOST
 	---help---
 	  Provides host support for ARM processors.
 
-config KVM_ARM_MAX_VCPUS
-	int "Number maximum supported virtual CPUs per VM"
-	depends on KVM_ARM_HOST
-	default 4
-	help
-	  Static number of max supported virtual CPUs per VM.
-
-	  If you choose a high number, the vcpu structures will be quite
-	  large, so only choose a reasonable number that you expect to
-	  actually use.
+source drivers/vhost/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile
index c5eef02c5..10d77a66c 100644
--- a/arch/arm/kvm/Makefile
+++ b/arch/arm/kvm/Makefile
@@ -17,10 +17,17 @@ AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt)
 KVM := ../../../virt/kvm
 kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o
 
+obj-$(CONFIG_KVM_ARM_HOST) += hyp/
 obj-y += kvm-arm.o init.o interrupts.o
 obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o
 obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o
-obj-y += $(KVM)/arm/vgic.o
-obj-y += $(KVM)/arm/vgic-v2.o
-obj-y += $(KVM)/arm/vgic-v2-emul.o
+
+obj-y += $(KVM)/arm/vgic/vgic.o
+obj-y += $(KVM)/arm/vgic/vgic-init.o
+obj-y += $(KVM)/arm/vgic/vgic-irqfd.o
+obj-y += $(KVM)/arm/vgic/vgic-v2.o
+obj-y += $(KVM)/arm/vgic/vgic-mmio.o
+obj-y += $(KVM)/arm/vgic/vgic-mmio-v2.o
+obj-y += $(KVM)/arm/vgic/vgic-kvm-device.o
+obj-y += $(KVM)/irqchip.o
 obj-y += $(KVM)/arm/arch_timer.o
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index f9c341c5a..c94b90d43 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -16,11 +16,11 @@
  * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  */
 
-#include <linux/cpu.h>
 #include <linux/cpu_pm.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/kvm_host.h>
+#include <linux/list.h>
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
@@ -28,6 +28,7 @@
 #include <linux/sched.h>
 #include <linux/kvm.h>
 #include <trace/events/kvm.h>
+#include <kvm/arm_pmu.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace.h"
@@ -44,6 +45,7 @@
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_coproc.h>
 #include <asm/kvm_psci.h>
+#include <asm/sections.h>
 
 #ifdef REQUIRES_VIRT
 __asm__(".arch_extension	virt");
@@ -58,9 +60,14 @@ static DEFINE_PER_CPU(struct kvm_vcpu *, kvm_arm_running_vcpu);
 
 /* The VMID used in the VTTBR */
 static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
-static u8 kvm_next_vmid;
+static u32 kvm_next_vmid;
+static unsigned int kvm_vmid_bits __read_mostly;
 static DEFINE_SPINLOCK(kvm_vmid_lock);
 
+static bool vgic_present;
+
+static DEFINE_PER_CPU(unsigned char, kvm_arm_hardware_enabled);
+
 static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu)
 {
 	BUG_ON(preemptible());
@@ -85,11 +92,6 @@ struct kvm_vcpu * __percpu *kvm_get_running_vcpus(void)
 	return &kvm_arm_running_vcpu;
 }
 
-int kvm_arch_hardware_enable(void)
-{
-	return 0;
-}
-
 int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
 {
 	return kvm_vcpu_exiting_guest_mode(vcpu) == IN_GUEST_MODE;
@@ -121,17 +123,19 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	if (ret)
 		goto out_fail_alloc;
 
-	ret = create_hyp_mappings(kvm, kvm + 1);
+	ret = create_hyp_mappings(kvm, kvm + 1, PAGE_HYP);
 	if (ret)
 		goto out_free_stage2_pgd;
 
+	kvm_vgic_early_init(kvm);
 	kvm_timer_init(kvm);
 
 	/* Mark the initial VMID generation invalid */
 	kvm->arch.vmid_gen = 0;
 
 	/* The maximum number of VCPUs is limited by the host's GIC model */
-	kvm->arch.max_vcpus = kvm_vgic_get_max_vcpus();
+	kvm->arch.max_vcpus = vgic_present ?
+				kvm_vgic_get_max_vcpus() : KVM_MAX_VCPUS;
 
 	return ret;
 out_free_stage2_pgd:
@@ -154,8 +158,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	int i;
 
-	kvm_free_stage2_pgd(kvm);
-
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
 			kvm_arch_vcpu_free(kvm->vcpus[i]);
@@ -171,6 +173,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	int r;
 	switch (ext) {
 	case KVM_CAP_IRQCHIP:
+		r = vgic_present;
+		break;
 	case KVM_CAP_IOEVENTFD:
 	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_USER_MEMORY:
@@ -196,7 +200,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = KVM_MAX_VCPUS;
 		break;
 	default:
-		r = kvm_arch_dev_ioctl_check_extension(ext);
+		r = kvm_arch_dev_ioctl_check_extension(kvm, ext);
 		break;
 	}
 	return r;
@@ -234,7 +238,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 	if (err)
 		goto free_vcpu;
 
-	err = create_hyp_mappings(vcpu, vcpu + 1);
+	err = create_hyp_mappings(vcpu, vcpu + 1, PAGE_HYP);
 	if (err)
 		goto vcpu_uninit;
 
@@ -249,6 +253,7 @@ out:
 
 void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
 {
+	kvm_vgic_vcpu_early_init(vcpu);
 }
 
 void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
@@ -256,6 +261,8 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 	kvm_mmu_free_memory_caches(vcpu);
 	kvm_timer_vcpu_terminate(vcpu);
 	kvm_vgic_vcpu_destroy(vcpu);
+	kvm_pmu_vcpu_destroy(vcpu);
+	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, vcpu);
 }
 
@@ -269,6 +276,16 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 	return kvm_timer_should_fire(vcpu);
 }
 
+void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
+{
+	kvm_timer_schedule(vcpu);
+}
+
+void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu)
+{
+	kvm_timer_unschedule(vcpu);
+}
+
 int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 {
 	/* Force users to call KVM_ARM_VCPU_INIT */
@@ -278,6 +295,8 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 	/* Set up the timer */
 	kvm_timer_vcpu_init(vcpu);
 
+	kvm_arm_reset_debug_ptr(vcpu);
+
 	return 0;
 }
 
@@ -299,19 +318,13 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 	vcpu->cpu = -1;
 
 	kvm_arm_set_running_vcpu(NULL);
+	kvm_timer_vcpu_put(vcpu);
 }
 
-int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
-					struct kvm_guest_debug *dbg)
-{
-	return -EINVAL;
-}
-
-
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
-	if (vcpu->arch.pause)
+	if (vcpu->arch.power_off)
 		mp_state->mp_state = KVM_MP_STATE_STOPPED;
 	else
 		mp_state->mp_state = KVM_MP_STATE_RUNNABLE;
@@ -324,10 +337,10 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 {
 	switch (mp_state->mp_state) {
 	case KVM_MP_STATE_RUNNABLE:
-		vcpu->arch.pause = false;
+		vcpu->arch.power_off = false;
 		break;
 	case KVM_MP_STATE_STOPPED:
-		vcpu->arch.pause = true;
+		vcpu->arch.power_off = true;
 		break;
 	default:
 		return -EINVAL;
@@ -345,7 +358,8 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
  */
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
 {
-	return !!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v);
+	return ((!!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v))
+		&& !v->arch.power_off && !v->arch.pause);
 }
 
 /* Just ensure a guest exit from a particular CPU */
@@ -355,12 +369,14 @@ static void exit_vm_noop(void *info)
 
 void force_vm_exit(const cpumask_t *mask)
 {
+	preempt_disable();
 	smp_call_function_many(mask, exit_vm_noop, NULL, true);
+	preempt_enable();
 }
 
 /**
  * need_new_vmid_gen - check that the VMID is still valid
- * @kvm: The VM's VMID to checkt
+ * @kvm: The VM's VMID to check
  *
  * return true if there is a new generation of VMIDs being used
  *
@@ -425,11 +441,12 @@ static void update_vttbr(struct kvm *kvm)
 	kvm->arch.vmid_gen = atomic64_read(&kvm_vmid_gen);
 	kvm->arch.vmid = kvm_next_vmid;
 	kvm_next_vmid++;
+	kvm_next_vmid &= (1 << kvm_vmid_bits) - 1;
 
 	/* update vttbr to be used with the new vmid */
-	pgd_phys = virt_to_phys(kvm_get_hwpgd(kvm));
+	pgd_phys = virt_to_phys(kvm->arch.pgd);
 	BUG_ON(pgd_phys & ~VTTBR_BADDR_MASK);
-	vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK;
+	vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK(kvm_vmid_bits);
 	kvm->arch.vttbr = pgd_phys | vmid;
 
 	spin_unlock(&kvm_vmid_lock);
@@ -438,7 +455,7 @@ static void update_vttbr(struct kvm *kvm)
 static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)
 {
 	struct kvm *kvm = vcpu->kvm;
-	int ret;
+	int ret = 0;
 
 	if (likely(vcpu->arch.has_run_once))
 		return 0;
@@ -461,9 +478,9 @@ static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)
 	 * interrupts from the virtual timer with a userspace gic.
 	 */
 	if (irqchip_in_kernel(kvm) && vgic_initialized(kvm))
-		kvm_timer_enable(kvm);
+		ret = kvm_timer_enable(vcpu);
 
-	return 0;
+	return ret;
 }
 
 bool kvm_arch_intc_initialized(struct kvm *kvm)
@@ -471,11 +488,45 @@ bool kvm_arch_intc_initialized(struct kvm *kvm)
 	return vgic_initialized(kvm);
 }
 
-static void vcpu_pause(struct kvm_vcpu *vcpu)
+void kvm_arm_halt_guest(struct kvm *kvm)
+{
+	int i;
+	struct kvm_vcpu *vcpu;
+
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		vcpu->arch.pause = true;
+	kvm_make_all_cpus_request(kvm, KVM_REQ_VCPU_EXIT);
+}
+
+void kvm_arm_halt_vcpu(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.pause = true;
+	kvm_vcpu_kick(vcpu);
+}
+
+void kvm_arm_resume_vcpu(struct kvm_vcpu *vcpu)
 {
-	wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
+	struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu);
 
-	wait_event_interruptible(*wq, !vcpu->arch.pause);
+	vcpu->arch.pause = false;
+	swake_up(wq);
+}
+
+void kvm_arm_resume_guest(struct kvm *kvm)
+{
+	int i;
+	struct kvm_vcpu *vcpu;
+
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_arm_resume_vcpu(vcpu);
+}
+
+static void vcpu_sleep(struct kvm_vcpu *vcpu)
+{
+	struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu);
+
+	swait_event_interruptible(*wq, ((!vcpu->arch.power_off) &&
+				       (!vcpu->arch.pause)));
 }
 
 static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
@@ -525,13 +576,19 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 		update_vttbr(vcpu->kvm);
 
-		if (vcpu->arch.pause)
-			vcpu_pause(vcpu);
+		if (vcpu->arch.power_off || vcpu->arch.pause)
+			vcpu_sleep(vcpu);
 
-		kvm_vgic_flush_hwstate(vcpu);
+		/*
+		 * Preparing the interrupts to be injected also
+		 * involves poking the GIC, which must be done in a
+		 * non-preemptible context.
+		 */
+		preempt_disable();
+		kvm_pmu_flush_hwstate(vcpu);
 		kvm_timer_flush_hwstate(vcpu);
+		kvm_vgic_flush_hwstate(vcpu);
 
-		preempt_disable();
 		local_irq_disable();
 
 		/*
@@ -542,28 +599,35 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 			run->exit_reason = KVM_EXIT_INTR;
 		}
 
-		if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) {
+		if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) ||
+			vcpu->arch.power_off || vcpu->arch.pause) {
 			local_irq_enable();
-			preempt_enable();
+			kvm_pmu_sync_hwstate(vcpu);
 			kvm_timer_sync_hwstate(vcpu);
 			kvm_vgic_sync_hwstate(vcpu);
+			preempt_enable();
 			continue;
 		}
 
+		kvm_arm_setup_debug(vcpu);
+
 		/**************************************************************
 		 * Enter the guest
 		 */
 		trace_kvm_entry(*vcpu_pc(vcpu));
-		__kvm_guest_enter();
+		guest_enter_irqoff();
 		vcpu->mode = IN_GUEST_MODE;
 
 		ret = kvm_call_hyp(__kvm_vcpu_run, vcpu);
 
 		vcpu->mode = OUTSIDE_GUEST_MODE;
+		vcpu->stat.exits++;
 		/*
 		 * Back from guest
 		 *************************************************************/
 
+		kvm_arm_clear_debug(vcpu);
+
 		/*
 		 * We may have taken a host interrupt in HYP mode (ie
 		 * while executing the guest). This interrupt is still
@@ -577,21 +641,28 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		local_irq_enable();
 
 		/*
-		 * We do local_irq_enable() before calling kvm_guest_exit() so
+		 * We do local_irq_enable() before calling guest_exit() so
 		 * that if a timer interrupt hits while running the guest we
 		 * account that tick as being spent in the guest.  We enable
-		 * preemption after calling kvm_guest_exit() so that if we get
+		 * preemption after calling guest_exit() so that if we get
 		 * preempted we make sure ticks after that is not counted as
 		 * guest time.
 		 */
-		kvm_guest_exit();
-		trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
-		preempt_enable();
-
+		guest_exit();
+		trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
 
+		/*
+		 * We must sync the PMU and timer state before the vgic state so
+		 * that the vgic can properly sample the updated state of the
+		 * interrupt line.
+		 */
+		kvm_pmu_sync_hwstate(vcpu);
 		kvm_timer_sync_hwstate(vcpu);
+
 		kvm_vgic_sync_hwstate(vcpu);
 
+		preempt_enable();
+
 		ret = handle_exit(vcpu, run, ret);
 	}
 
@@ -753,21 +824,64 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
 	vcpu_reset_hcr(vcpu);
 
 	/*
-	 * Handle the "start in power-off" case by marking the VCPU as paused.
+	 * Handle the "start in power-off" case.
 	 */
 	if (test_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features))
-		vcpu->arch.pause = true;
+		vcpu->arch.power_off = true;
 	else
-		vcpu->arch.pause = false;
+		vcpu->arch.power_off = false;
 
 	return 0;
 }
 
+static int kvm_arm_vcpu_set_attr(struct kvm_vcpu *vcpu,
+				 struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	default:
+		ret = kvm_arm_vcpu_arch_set_attr(vcpu, attr);
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_arm_vcpu_get_attr(struct kvm_vcpu *vcpu,
+				 struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	default:
+		ret = kvm_arm_vcpu_arch_get_attr(vcpu, attr);
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_arm_vcpu_has_attr(struct kvm_vcpu *vcpu,
+				 struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	default:
+		ret = kvm_arm_vcpu_arch_has_attr(vcpu, attr);
+		break;
+	}
+
+	return ret;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
 	struct kvm_vcpu *vcpu = filp->private_data;
 	void __user *argp = (void __user *)arg;
+	struct kvm_device_attr attr;
 
 	switch (ioctl) {
 	case KVM_ARM_VCPU_INIT: {
@@ -810,6 +924,21 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 			return -E2BIG;
 		return kvm_arm_copy_reg_indices(vcpu, user_list->reg);
 	}
+	case KVM_SET_DEVICE_ATTR: {
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			return -EFAULT;
+		return kvm_arm_vcpu_set_attr(vcpu, &attr);
+	}
+	case KVM_GET_DEVICE_ATTR: {
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			return -EFAULT;
+		return kvm_arm_vcpu_get_attr(vcpu, &attr);
+	}
+	case KVM_HAS_DEVICE_ATTR: {
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			return -EFAULT;
+		return kvm_arm_vcpu_has_attr(vcpu, &attr);
+	}
 	default:
 		return -EINVAL;
 	}
@@ -862,6 +991,8 @@ static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm,
 
 	switch (dev_id) {
 	case KVM_ARM_DEVICE_VGIC_V2:
+		if (!vgic_present)
+			return -ENXIO;
 		return kvm_vgic_addr(kvm, type, &dev_addr->addr, true);
 	default:
 		return -ENODEV;
@@ -876,7 +1007,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
 
 	switch (ioctl) {
 	case KVM_CREATE_IRQCHIP: {
-		return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
+		int ret;
+		if (!vgic_present)
+			return -ENXIO;
+		mutex_lock(&kvm->lock);
+		ret = kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
+		mutex_unlock(&kvm->lock);
+		return ret;
 	}
 	case KVM_ARM_SET_DEVICE_ADDR: {
 		struct kvm_arm_device_addr dev_addr;
@@ -905,7 +1042,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
 
 static void cpu_init_hyp_mode(void *dummy)
 {
-	phys_addr_t boot_pgd_ptr;
 	phys_addr_t pgd_ptr;
 	unsigned long hyp_stack_ptr;
 	unsigned long stack_page;
@@ -914,45 +1050,96 @@ static void cpu_init_hyp_mode(void *dummy)
 	/* Switch from the HYP stub to our own HYP init vector */
 	__hyp_set_vectors(kvm_get_idmap_vector());
 
-	boot_pgd_ptr = kvm_mmu_get_boot_httbr();
 	pgd_ptr = kvm_mmu_get_httbr();
 	stack_page = __this_cpu_read(kvm_arm_hyp_stack_page);
 	hyp_stack_ptr = stack_page + PAGE_SIZE;
-	vector_ptr = (unsigned long)__kvm_hyp_vector;
+	vector_ptr = (unsigned long)kvm_ksym_ref(__kvm_hyp_vector);
 
-	__cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr);
+	__cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr);
+	__cpu_init_stage2();
+
+	kvm_arm_init_debug();
 }
 
-static int hyp_init_cpu_notify(struct notifier_block *self,
-			       unsigned long action, void *cpu)
+static void cpu_hyp_reinit(void)
 {
-	switch (action) {
-	case CPU_STARTING:
-	case CPU_STARTING_FROZEN:
+	if (is_kernel_in_hyp_mode()) {
+		/*
+		 * __cpu_init_stage2() is safe to call even if the PM
+		 * event was cancelled before the CPU was reset.
+		 */
+		__cpu_init_stage2();
+	} else {
 		if (__hyp_get_vectors() == hyp_default_vectors)
 			cpu_init_hyp_mode(NULL);
-		break;
 	}
+}
 
-	return NOTIFY_OK;
+static void cpu_hyp_reset(void)
+{
+	if (!is_kernel_in_hyp_mode())
+		__cpu_reset_hyp_mode(hyp_default_vectors,
+				     kvm_get_idmap_start());
 }
 
-static struct notifier_block hyp_init_cpu_nb = {
-	.notifier_call = hyp_init_cpu_notify,
-};
+static void _kvm_arch_hardware_enable(void *discard)
+{
+	if (!__this_cpu_read(kvm_arm_hardware_enabled)) {
+		cpu_hyp_reinit();
+		__this_cpu_write(kvm_arm_hardware_enabled, 1);
+	}
+}
+
+int kvm_arch_hardware_enable(void)
+{
+	_kvm_arch_hardware_enable(NULL);
+	return 0;
+}
+
+static void _kvm_arch_hardware_disable(void *discard)
+{
+	if (__this_cpu_read(kvm_arm_hardware_enabled)) {
+		cpu_hyp_reset();
+		__this_cpu_write(kvm_arm_hardware_enabled, 0);
+	}
+}
+
+void kvm_arch_hardware_disable(void)
+{
+	_kvm_arch_hardware_disable(NULL);
+}
 
 #ifdef CONFIG_CPU_PM
 static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
 				    unsigned long cmd,
 				    void *v)
 {
-	if (cmd == CPU_PM_EXIT &&
-	    __hyp_get_vectors() == hyp_default_vectors) {
-		cpu_init_hyp_mode(NULL);
+	/*
+	 * kvm_arm_hardware_enabled is left with its old value over
+	 * PM_ENTER->PM_EXIT. It is used to indicate PM_EXIT should
+	 * re-enable hyp.
+	 */
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		if (__this_cpu_read(kvm_arm_hardware_enabled))
+			/*
+			 * don't update kvm_arm_hardware_enabled here
+			 * so that the hardware will be re-enabled
+			 * when we resume. See below.
+			 */
+			cpu_hyp_reset();
+
+		return NOTIFY_OK;
+	case CPU_PM_EXIT:
+		if (__this_cpu_read(kvm_arm_hardware_enabled))
+			/* The hardware was enabled before suspend. */
+			cpu_hyp_reinit();
+
 		return NOTIFY_OK;
-	}
 
-	return NOTIFY_DONE;
+	default:
+		return NOTIFY_DONE;
+	}
 }
 
 static struct notifier_block hyp_init_cpu_pm_nb = {
@@ -963,12 +1150,105 @@ static void __init hyp_cpu_pm_init(void)
 {
 	cpu_pm_register_notifier(&hyp_init_cpu_pm_nb);
 }
+static void __init hyp_cpu_pm_exit(void)
+{
+	cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb);
+}
 #else
 static inline void hyp_cpu_pm_init(void)
 {
 }
+static inline void hyp_cpu_pm_exit(void)
+{
+}
 #endif
 
+static void teardown_common_resources(void)
+{
+	free_percpu(kvm_host_cpu_state);
+}
+
+static int init_common_resources(void)
+{
+	kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t);
+	if (!kvm_host_cpu_state) {
+		kvm_err("Cannot allocate host CPU state\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int init_subsystems(void)
+{
+	int err = 0;
+
+	/*
+	 * Enable hardware so that subsystem initialisation can access EL2.
+	 */
+	on_each_cpu(_kvm_arch_hardware_enable, NULL, 1);
+
+	/*
+	 * Register CPU lower-power notifier
+	 */
+	hyp_cpu_pm_init();
+
+	/*
+	 * Init HYP view of VGIC
+	 */
+	err = kvm_vgic_hyp_init();
+	switch (err) {
+	case 0:
+		vgic_present = true;
+		break;
+	case -ENODEV:
+	case -ENXIO:
+		vgic_present = false;
+		err = 0;
+		break;
+	default:
+		goto out;
+	}
+
+	/*
+	 * Init HYP architected timer support
+	 */
+	err = kvm_timer_hyp_init();
+	if (err)
+		goto out;
+
+	kvm_perf_init();
+	kvm_coproc_table_init();
+
+out:
+	on_each_cpu(_kvm_arch_hardware_disable, NULL, 1);
+
+	return err;
+}
+
+static void teardown_hyp_mode(void)
+{
+	int cpu;
+
+	if (is_kernel_in_hyp_mode())
+		return;
+
+	free_hyp_pgds();
+	for_each_possible_cpu(cpu)
+		free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
+	hyp_cpu_pm_exit();
+}
+
+static int init_vhe_mode(void)
+{
+	/* set size of VMID supported by CPU */
+	kvm_vmid_bits = kvm_get_vmid_bits();
+	kvm_info("%d-bit VMID\n", kvm_vmid_bits);
+
+	kvm_info("VHE mode initialized successfully\n");
+	return 0;
+}
+
 /**
  * Inits Hyp-mode on all online CPUs
  */
@@ -999,7 +1279,7 @@ static int init_hyp_mode(void)
 		stack_page = __get_free_page(GFP_KERNEL);
 		if (!stack_page) {
 			err = -ENOMEM;
-			goto out_free_stack_pages;
+			goto out_err;
 		}
 
 		per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page;
@@ -1008,10 +1288,18 @@ static int init_hyp_mode(void)
 	/*
 	 * Map the Hyp-code called directly from the host
 	 */
-	err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end);
+	err = create_hyp_mappings(kvm_ksym_ref(__hyp_text_start),
+				  kvm_ksym_ref(__hyp_text_end), PAGE_HYP_EXEC);
 	if (err) {
 		kvm_err("Cannot map world-switch code\n");
-		goto out_free_mappings;
+		goto out_err;
+	}
+
+	err = create_hyp_mappings(kvm_ksym_ref(__start_rodata),
+				  kvm_ksym_ref(__end_rodata), PAGE_HYP_RO);
+	if (err) {
+		kvm_err("Cannot map rodata section\n");
+		goto out_err;
 	}
 
 	/*
@@ -1019,72 +1307,37 @@ static int init_hyp_mode(void)
 	 */
 	for_each_possible_cpu(cpu) {
 		char *stack_page = (char *)per_cpu(kvm_arm_hyp_stack_page, cpu);
-		err = create_hyp_mappings(stack_page, stack_page + PAGE_SIZE);
+		err = create_hyp_mappings(stack_page, stack_page + PAGE_SIZE,
+					  PAGE_HYP);
 
 		if (err) {
 			kvm_err("Cannot map hyp stack\n");
-			goto out_free_mappings;
+			goto out_err;
 		}
 	}
 
-	/*
-	 * Map the host CPU structures
-	 */
-	kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t);
-	if (!kvm_host_cpu_state) {
-		err = -ENOMEM;
-		kvm_err("Cannot allocate host CPU state\n");
-		goto out_free_mappings;
-	}
-
 	for_each_possible_cpu(cpu) {
 		kvm_cpu_context_t *cpu_ctxt;
 
 		cpu_ctxt = per_cpu_ptr(kvm_host_cpu_state, cpu);
-		err = create_hyp_mappings(cpu_ctxt, cpu_ctxt + 1);
+		err = create_hyp_mappings(cpu_ctxt, cpu_ctxt + 1, PAGE_HYP);
 
 		if (err) {
 			kvm_err("Cannot map host CPU state: %d\n", err);
-			goto out_free_context;
+			goto out_err;
 		}
 	}
 
-	/*
-	 * Execute the init code on each CPU.
-	 */
-	on_each_cpu(cpu_init_hyp_mode, NULL, 1);
-
-	/*
-	 * Init HYP view of VGIC
-	 */
-	err = kvm_vgic_hyp_init();
-	if (err)
-		goto out_free_context;
-
-	/*
-	 * Init HYP architected timer support
-	 */
-	err = kvm_timer_hyp_init();
-	if (err)
-		goto out_free_mappings;
-
-#ifndef CONFIG_HOTPLUG_CPU
-	free_boot_hyp_pgd();
-#endif
-
-	kvm_perf_init();
+	/* set size of VMID supported by CPU */
+	kvm_vmid_bits = kvm_get_vmid_bits();
+	kvm_info("%d-bit VMID\n", kvm_vmid_bits);
 
 	kvm_info("Hyp mode initialized successfully\n");
 
 	return 0;
-out_free_context:
-	free_percpu(kvm_host_cpu_state);
-out_free_mappings:
-	free_hyp_pgds();
-out_free_stack_pages:
-	for_each_possible_cpu(cpu)
-		free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
+
 out_err:
+	teardown_hyp_mode();
 	kvm_err("error initializing Hyp mode: %d\n", err);
 	return err;
 }
@@ -1128,26 +1381,27 @@ int kvm_arch_init(void *opaque)
 		}
 	}
 
-	cpu_notifier_register_begin();
-
-	err = init_hyp_mode();
+	err = init_common_resources();
 	if (err)
-		goto out_err;
+		return err;
 
-	err = __register_cpu_notifier(&hyp_init_cpu_nb);
-	if (err) {
-		kvm_err("Cannot register HYP init CPU notifier (%d)\n", err);
+	if (is_kernel_in_hyp_mode())
+		err = init_vhe_mode();
+	else
+		err = init_hyp_mode();
+	if (err)
 		goto out_err;
-	}
 
-	cpu_notifier_register_done();
-
-	hyp_cpu_pm_init();
+	err = init_subsystems();
+	if (err)
+		goto out_hyp;
 
-	kvm_coproc_table_init();
 	return 0;
+
+out_hyp:
+	teardown_hyp_mode();
 out_err:
-	cpu_notifier_register_done();
+	teardown_common_resources();
 	return err;
 }
 
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
index f3d88dc38..1bb2b79c0 100644
--- a/arch/arm/kvm/coproc.c
+++ b/arch/arm/kvm/coproc.c
@@ -16,6 +16,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  */
+
+#include <linux/bsearch.h>
 #include <linux/mm.h>
 #include <linux/kvm_host.h>
 #include <linux/uaccess.h>
@@ -54,8 +56,8 @@ static inline void vcpu_cp15_reg64_set(struct kvm_vcpu *vcpu,
 				       const struct coproc_reg *r,
 				       u64 val)
 {
-	vcpu->arch.cp15[r->reg] = val & 0xffffffff;
-	vcpu->arch.cp15[r->reg + 1] = val >> 32;
+	vcpu_cp15(vcpu, r->reg) = val & 0xffffffff;
+	vcpu_cp15(vcpu, r->reg + 1) = val >> 32;
 }
 
 static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu,
@@ -63,9 +65,9 @@ static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu,
 {
 	u64 val;
 
-	val = vcpu->arch.cp15[r->reg + 1];
+	val = vcpu_cp15(vcpu, r->reg + 1);
 	val = val << 32;
-	val = val | vcpu->arch.cp15[r->reg];
+	val = val | vcpu_cp15(vcpu, r->reg);
 	return val;
 }
 
@@ -104,7 +106,7 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 	 * vcpu_id, but we read the 'U' bit from the underlying
 	 * hardware directly.
 	 */
-	vcpu->arch.cp15[c0_MPIDR] = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) |
+	vcpu_cp15(vcpu, c0_MPIDR) = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) |
 				     ((vcpu->vcpu_id >> 2) << MPIDR_LEVEL_BITS) |
 				     (vcpu->vcpu_id & 3));
 }
@@ -117,7 +119,7 @@ static bool access_actlr(struct kvm_vcpu *vcpu,
 	if (p->is_write)
 		return ignore_write(vcpu, p);
 
-	*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR];
+	*vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c1_ACTLR);
 	return true;
 }
 
@@ -139,7 +141,7 @@ static bool access_l2ctlr(struct kvm_vcpu *vcpu,
 	if (p->is_write)
 		return ignore_write(vcpu, p);
 
-	*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR];
+	*vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c9_L2CTLR);
 	return true;
 }
 
@@ -156,7 +158,7 @@ static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 	ncores = min(ncores, 3U);
 	l2ctlr |= (ncores & 3) << 24;
 
-	vcpu->arch.cp15[c9_L2CTLR] = l2ctlr;
+	vcpu_cp15(vcpu, c9_L2CTLR) = l2ctlr;
 }
 
 static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
@@ -171,7 +173,7 @@ static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 	else
 		actlr &= ~(1U << 6);
 
-	vcpu->arch.cp15[c1_ACTLR] = actlr;
+	vcpu_cp15(vcpu, c1_ACTLR) = actlr;
 }
 
 /*
@@ -218,9 +220,9 @@ bool access_vm_reg(struct kvm_vcpu *vcpu,
 
 	BUG_ON(!p->is_write);
 
-	vcpu->arch.cp15[r->reg] = *vcpu_reg(vcpu, p->Rt1);
+	vcpu_cp15(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt1);
 	if (p->is_64bit)
-		vcpu->arch.cp15[r->reg + 1] = *vcpu_reg(vcpu, p->Rt2);
+		vcpu_cp15(vcpu, r->reg + 1) = *vcpu_reg(vcpu, p->Rt2);
 
 	kvm_toggle_cache(vcpu, was_enabled);
 	return true;
@@ -381,17 +383,26 @@ static const struct coproc_reg cp15_regs[] = {
 	{ CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar},
 };
 
+static int check_reg_table(const struct coproc_reg *table, unsigned int n)
+{
+	unsigned int i;
+
+	for (i = 1; i < n; i++) {
+		if (cmp_reg(&table[i-1], &table[i]) >= 0) {
+			kvm_err("reg table %p out of order (%d)\n", table, i - 1);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
 /* Target specific emulation tables */
 static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS];
 
 void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table)
 {
-	unsigned int i;
-
-	for (i = 1; i < table->num; i++)
-		BUG_ON(cmp_reg(&table->table[i-1],
-			       &table->table[i]) >= 0);
-
+	BUG_ON(check_reg_table(table->table, table->num));
 	target_tables[table->target] = table;
 }
 
@@ -405,29 +416,32 @@ static const struct coproc_reg *get_target_table(unsigned target, size_t *num)
 	return table->table;
 }
 
+#define reg_to_match_value(x)						\
+	({								\
+		unsigned long val;					\
+		val  = (x)->CRn << 11;					\
+		val |= (x)->CRm << 7;					\
+		val |= (x)->Op1 << 4;					\
+		val |= (x)->Op2 << 1;					\
+		val |= !(x)->is_64bit;					\
+		val;							\
+	 })
+
+static int match_reg(const void *key, const void *elt)
+{
+	const unsigned long pval = (unsigned long)key;
+	const struct coproc_reg *r = elt;
+
+	return pval - reg_to_match_value(r);
+}
+
 static const struct coproc_reg *find_reg(const struct coproc_params *params,
 					 const struct coproc_reg table[],
 					 unsigned int num)
 {
-	unsigned int i;
-
-	for (i = 0; i < num; i++) {
-		const struct coproc_reg *r = &table[i];
-
-		if (params->is_64bit != r->is_64)
-			continue;
-		if (params->CRn != r->CRn)
-			continue;
-		if (params->CRm != r->CRm)
-			continue;
-		if (params->Op1 != r->Op1)
-			continue;
-		if (params->Op2 != r->Op2)
-			continue;
+	unsigned long pval = reg_to_match_value(params);
 
-		return r;
-	}
-	return NULL;
+	return bsearch((void *)pval, table, num, sizeof(table[0]), match_reg);
 }
 
 static int emulate_cp15(struct kvm_vcpu *vcpu,
@@ -645,6 +659,9 @@ static struct coproc_reg invariant_cp15[] = {
 	{ CRn( 0), CRm( 0), Op1( 0), Op2( 3), is32, NULL, get_TLBTR },
 	{ CRn( 0), CRm( 0), Op1( 0), Op2( 6), is32, NULL, get_REVIDR },
 
+	{ CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR },
+	{ CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR },
+
 	{ CRn( 0), CRm( 1), Op1( 0), Op2( 0), is32, NULL, get_ID_PFR0 },
 	{ CRn( 0), CRm( 1), Op1( 0), Op2( 1), is32, NULL, get_ID_PFR1 },
 	{ CRn( 0), CRm( 1), Op1( 0), Op2( 2), is32, NULL, get_ID_DFR0 },
@@ -660,9 +677,6 @@ static struct coproc_reg invariant_cp15[] = {
 	{ CRn( 0), CRm( 2), Op1( 0), Op2( 3), is32, NULL, get_ID_ISAR3 },
 	{ CRn( 0), CRm( 2), Op1( 0), Op2( 4), is32, NULL, get_ID_ISAR4 },
 	{ CRn( 0), CRm( 2), Op1( 0), Op2( 5), is32, NULL, get_ID_ISAR5 },
-
-	{ CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR },
-	{ CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR },
 };
 
 /*
@@ -901,7 +915,7 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
 	if (vfpid < num_fp_regs()) {
 		if (KVM_REG_SIZE(id) != 8)
 			return -ENOENT;
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid],
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpregs[vfpid],
 				   id);
 	}
 
@@ -911,13 +925,13 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
 
 	switch (vfpid) {
 	case KVM_REG_ARM_VFP_FPEXC:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id);
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpexc, id);
 	case KVM_REG_ARM_VFP_FPSCR:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id);
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpscr, id);
 	case KVM_REG_ARM_VFP_FPINST:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id);
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst, id);
 	case KVM_REG_ARM_VFP_FPINST2:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id);
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst2, id);
 	case KVM_REG_ARM_VFP_MVFR0:
 		val = fmrx(MVFR0);
 		return reg_to_user(uaddr, &val, id);
@@ -945,7 +959,7 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr)
 	if (vfpid < num_fp_regs()) {
 		if (KVM_REG_SIZE(id) != 8)
 			return -ENOENT;
-		return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid],
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpregs[vfpid],
 				     uaddr, id);
 	}
 
@@ -955,13 +969,13 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr)
 
 	switch (vfpid) {
 	case KVM_REG_ARM_VFP_FPEXC:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id);
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpexc, uaddr, id);
 	case KVM_REG_ARM_VFP_FPSCR:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id);
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpscr, uaddr, id);
 	case KVM_REG_ARM_VFP_FPINST:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id);
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst, uaddr, id);
 	case KVM_REG_ARM_VFP_FPINST2:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id);
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst2, uaddr, id);
 	/* These are invariant. */
 	case KVM_REG_ARM_VFP_MVFR0:
 		if (reg_from_user(&val, uaddr, id))
@@ -1030,7 +1044,7 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		val = vcpu_cp15_reg64_get(vcpu, r);
 		ret = reg_to_user(uaddr, &val, reg->id);
 	} else if (KVM_REG_SIZE(reg->id) == 4) {
-		ret = reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id);
+		ret = reg_to_user(uaddr, &vcpu_cp15(vcpu, r->reg), reg->id);
 	}
 
 	return ret;
@@ -1060,7 +1074,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		if (!ret)
 			vcpu_cp15_reg64_set(vcpu, r, val);
 	} else if (KVM_REG_SIZE(reg->id) == 4) {
-		ret = reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id);
+		ret = reg_from_user(&vcpu_cp15(vcpu, r->reg), uaddr, reg->id);
 	}
 
 	return ret;
@@ -1096,7 +1110,7 @@ static int write_demux_regids(u64 __user *uindices)
 static u64 cp15_to_index(const struct coproc_reg *reg)
 {
 	u64 val = KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT);
-	if (reg->is_64) {
+	if (reg->is_64bit) {
 		val |= KVM_REG_SIZE_U64;
 		val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT);
 		/*
@@ -1210,8 +1224,8 @@ void kvm_coproc_table_init(void)
 	unsigned int i;
 
 	/* Make sure tables are unique and in order. */
-	for (i = 1; i < ARRAY_SIZE(cp15_regs); i++)
-		BUG_ON(cmp_reg(&cp15_regs[i-1], &cp15_regs[i]) >= 0);
+	BUG_ON(check_reg_table(cp15_regs, ARRAY_SIZE(cp15_regs)));
+	BUG_ON(check_reg_table(invariant_cp15, ARRAY_SIZE(invariant_cp15)));
 
 	/* We abuse the reset function to overwrite the table itself. */
 	for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++)
@@ -1248,7 +1262,7 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu)
 	const struct coproc_reg *table;
 
 	/* Catch someone adding a register without putting in reset entry. */
-	memset(vcpu->arch.cp15, 0x42, sizeof(vcpu->arch.cp15));
+	memset(vcpu->arch.ctxt.cp15, 0x42, sizeof(vcpu->arch.ctxt.cp15));
 
 	/* Generic chip reset first (so target could override). */
 	reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs));
@@ -1257,6 +1271,6 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu)
 	reset_coproc_regs(vcpu, table, num);
 
 	for (num = 1; num < NR_CP15_REGS; num++)
-		if (vcpu->arch.cp15[num] == 0x42424242)
-			panic("Didn't reset vcpu->arch.cp15[%zi]", num);
+		if (vcpu_cp15(vcpu, num) == 0x42424242)
+			panic("Didn't reset vcpu_cp15(vcpu, %zi)", num);
 }
diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h
index 88d24a3a9..eef1759c2 100644
--- a/arch/arm/kvm/coproc.h
+++ b/arch/arm/kvm/coproc.h
@@ -37,7 +37,7 @@ struct coproc_reg {
 	unsigned long Op1;
 	unsigned long Op2;
 
-	bool is_64;
+	bool is_64bit;
 
 	/* Trapped access from guest, if non-NULL. */
 	bool (*access)(struct kvm_vcpu *,
@@ -47,7 +47,7 @@ struct coproc_reg {
 	/* Initialization for vcpu. */
 	void (*reset)(struct kvm_vcpu *, const struct coproc_reg *);
 
-	/* Index into vcpu->arch.cp15[], or 0 if we don't need to save it. */
+	/* Index into vcpu_cp15(vcpu, ...), or 0 if we don't need to save it. */
 	unsigned long reg;
 
 	/* Value (usually reset value) */
@@ -104,25 +104,25 @@ static inline void reset_unknown(struct kvm_vcpu *vcpu,
 				 const struct coproc_reg *r)
 {
 	BUG_ON(!r->reg);
-	BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15));
-	vcpu->arch.cp15[r->reg] = 0xdecafbad;
+	BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15));
+	vcpu_cp15(vcpu, r->reg) = 0xdecafbad;
 }
 
 static inline void reset_val(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 {
 	BUG_ON(!r->reg);
-	BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15));
-	vcpu->arch.cp15[r->reg] = r->val;
+	BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15));
+	vcpu_cp15(vcpu, r->reg) = r->val;
 }
 
 static inline void reset_unknown64(struct kvm_vcpu *vcpu,
 				   const struct coproc_reg *r)
 {
 	BUG_ON(!r->reg);
-	BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.cp15));
+	BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.ctxt.cp15));
 
-	vcpu->arch.cp15[r->reg] = 0xdecafbad;
-	vcpu->arch.cp15[r->reg+1] = 0xd0c0ffee;
+	vcpu_cp15(vcpu, r->reg) = 0xdecafbad;
+	vcpu_cp15(vcpu, r->reg+1) = 0xd0c0ffee;
 }
 
 static inline int cmp_reg(const struct coproc_reg *i1,
@@ -141,7 +141,7 @@ static inline int cmp_reg(const struct coproc_reg *i1,
 		return i1->Op1 - i2->Op1;
 	if (i1->Op2 != i2->Op2)
 		return i1->Op2 - i2->Op2;
-	return i2->is_64 - i1->is_64;
+	return i2->is_64bit - i1->is_64bit;
 }
 
 
@@ -150,8 +150,8 @@ static inline int cmp_reg(const struct coproc_reg *i1,
 #define CRm64(_x)       .CRn = _x, .CRm = 0
 #define Op1(_x) 	.Op1 = _x
 #define Op2(_x) 	.Op2 = _x
-#define is64		.is_64 = true
-#define is32		.is_64 = false
+#define is64		.is_64bit = true
+#define is32		.is_64bit = false
 
 bool access_vm_reg(struct kvm_vcpu *vcpu,
 		   const struct coproc_params *p,
diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c
index d6c005283..af93e3ffc 100644
--- a/arch/arm/kvm/emulate.c
+++ b/arch/arm/kvm/emulate.c
@@ -112,7 +112,7 @@ static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = {
  */
 unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num)
 {
-	unsigned long *reg_array = (unsigned long *)&vcpu->arch.regs;
+	unsigned long *reg_array = (unsigned long *)&vcpu->arch.ctxt.gp_regs;
 	unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK;
 
 	switch (mode) {
@@ -147,15 +147,15 @@ unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu)
 	unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK;
 	switch (mode) {
 	case SVC_MODE:
-		return &vcpu->arch.regs.KVM_ARM_SVC_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_SVC_spsr;
 	case ABT_MODE:
-		return &vcpu->arch.regs.KVM_ARM_ABT_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_ABT_spsr;
 	case UND_MODE:
-		return &vcpu->arch.regs.KVM_ARM_UND_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_UND_spsr;
 	case IRQ_MODE:
-		return &vcpu->arch.regs.KVM_ARM_IRQ_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_IRQ_spsr;
 	case FIQ_MODE:
-		return &vcpu->arch.regs.KVM_ARM_FIQ_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_FIQ_spsr;
 	default:
 		BUG();
 	}
@@ -210,7 +210,7 @@ bool kvm_condition_valid(struct kvm_vcpu *vcpu)
  * @vcpu:	The VCPU pointer
  *
  * When exceptions occur while instructions are executed in Thumb IF-THEN
- * blocks, the ITSTATE field of the CPSR is not advanved (updated), so we have
+ * blocks, the ITSTATE field of the CPSR is not advanced (updated), so we have
  * to do this little bit of work manually. The fields map like this:
  *
  * IT[7:0] -> CPSR[26:25],CPSR[15:10]
@@ -266,8 +266,8 @@ void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr)
 
 static u32 exc_vector_base(struct kvm_vcpu *vcpu)
 {
-	u32 sctlr = vcpu->arch.cp15[c1_SCTLR];
-	u32 vbar = vcpu->arch.cp15[c12_VBAR];
+	u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR);
+	u32 vbar = vcpu_cp15(vcpu, c12_VBAR);
 
 	if (sctlr & SCTLR_V)
 		return 0xffff0000;
@@ -275,6 +275,40 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu)
 		return vbar;
 }
 
+/*
+ * Switch to an exception mode, updating both CPSR and SPSR. Follow
+ * the logic described in AArch32.EnterMode() from the ARMv8 ARM.
+ */
+static void kvm_update_psr(struct kvm_vcpu *vcpu, unsigned long mode)
+{
+	unsigned long cpsr = *vcpu_cpsr(vcpu);
+	u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR);
+
+	*vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | mode;
+
+	switch (mode) {
+	case FIQ_MODE:
+		*vcpu_cpsr(vcpu) |= PSR_F_BIT;
+		/* Fall through */
+	case ABT_MODE:
+	case IRQ_MODE:
+		*vcpu_cpsr(vcpu) |= PSR_A_BIT;
+		/* Fall through */
+	default:
+		*vcpu_cpsr(vcpu) |= PSR_I_BIT;
+	}
+
+	*vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT);
+
+	if (sctlr & SCTLR_TE)
+		*vcpu_cpsr(vcpu) |= PSR_T_BIT;
+	if (sctlr & SCTLR_EE)
+		*vcpu_cpsr(vcpu) |= PSR_E_BIT;
+
+	/* Note: These now point to the mode banked copies */
+	*vcpu_spsr(vcpu) = cpsr;
+}
+
 /**
  * kvm_inject_undefined - inject an undefined exception into the guest
  * @vcpu: The VCPU to receive the undefined exception
@@ -286,29 +320,13 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu)
  */
 void kvm_inject_undefined(struct kvm_vcpu *vcpu)
 {
-	unsigned long new_lr_value;
-	unsigned long new_spsr_value;
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
-	u32 sctlr = vcpu->arch.cp15[c1_SCTLR];
 	bool is_thumb = (cpsr & PSR_T_BIT);
 	u32 vect_offset = 4;
 	u32 return_offset = (is_thumb) ? 2 : 4;
 
-	new_spsr_value = cpsr;
-	new_lr_value = *vcpu_pc(vcpu) - return_offset;
-
-	*vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | UND_MODE;
-	*vcpu_cpsr(vcpu) |= PSR_I_BIT;
-	*vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT);
-
-	if (sctlr & SCTLR_TE)
-		*vcpu_cpsr(vcpu) |= PSR_T_BIT;
-	if (sctlr & SCTLR_EE)
-		*vcpu_cpsr(vcpu) |= PSR_E_BIT;
-
-	/* Note: These now point to UND banked copies */
-	*vcpu_spsr(vcpu) = cpsr;
-	*vcpu_reg(vcpu, 14) = new_lr_value;
+	kvm_update_psr(vcpu, UND_MODE);
+	*vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) - return_offset;
 
 	/* Branch to exception vector */
 	*vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset;
@@ -320,30 +338,14 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu)
  */
 static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr)
 {
-	unsigned long new_lr_value;
-	unsigned long new_spsr_value;
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
-	u32 sctlr = vcpu->arch.cp15[c1_SCTLR];
 	bool is_thumb = (cpsr & PSR_T_BIT);
 	u32 vect_offset;
 	u32 return_offset = (is_thumb) ? 4 : 0;
 	bool is_lpae;
 
-	new_spsr_value = cpsr;
-	new_lr_value = *vcpu_pc(vcpu) + return_offset;
-
-	*vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | ABT_MODE;
-	*vcpu_cpsr(vcpu) |= PSR_I_BIT | PSR_A_BIT;
-	*vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT);
-
-	if (sctlr & SCTLR_TE)
-		*vcpu_cpsr(vcpu) |= PSR_T_BIT;
-	if (sctlr & SCTLR_EE)
-		*vcpu_cpsr(vcpu) |= PSR_E_BIT;
-
-	/* Note: These now point to ABT banked copies */
-	*vcpu_spsr(vcpu) = cpsr;
-	*vcpu_reg(vcpu, 14) = new_lr_value;
+	kvm_update_psr(vcpu, ABT_MODE);
+	*vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;
 
 	if (is_pabt)
 		vect_offset = 12;
@@ -355,22 +357,22 @@ static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr)
 
 	if (is_pabt) {
 		/* Set IFAR and IFSR */
-		vcpu->arch.cp15[c6_IFAR] = addr;
-		is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31);
+		vcpu_cp15(vcpu, c6_IFAR) = addr;
+		is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31);
 		/* Always give debug fault for now - should give guest a clue */
 		if (is_lpae)
-			vcpu->arch.cp15[c5_IFSR] = 1 << 9 | 0x22;
+			vcpu_cp15(vcpu, c5_IFSR) = 1 << 9 | 0x22;
 		else
-			vcpu->arch.cp15[c5_IFSR] = 2;
+			vcpu_cp15(vcpu, c5_IFSR) = 2;
 	} else { /* !iabt */
 		/* Set DFAR and DFSR */
-		vcpu->arch.cp15[c6_DFAR] = addr;
-		is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31);
+		vcpu_cp15(vcpu, c6_DFAR) = addr;
+		is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31);
 		/* Always give debug fault for now - should give guest a clue */
 		if (is_lpae)
-			vcpu->arch.cp15[c5_DFSR] = 1 << 9 | 0x22;
+			vcpu_cp15(vcpu, c5_DFSR) = 1 << 9 | 0x22;
 		else
-			vcpu->arch.cp15[c5_DFSR] = 2;
+			vcpu_cp15(vcpu, c5_DFSR) = 2;
 	}
 
 }
diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c
index d503fbb78..9aca92074 100644
--- a/arch/arm/kvm/guest.c
+++ b/arch/arm/kvm/guest.c
@@ -25,7 +25,6 @@
 #include <asm/cputype.h>
 #include <asm/uaccess.h>
 #include <asm/kvm.h>
-#include <asm/kvm_asm.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_coproc.h>
 
@@ -33,6 +32,12 @@
 #define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU }
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
+	VCPU_STAT(hvc_exit_stat),
+	VCPU_STAT(wfe_exit_stat),
+	VCPU_STAT(wfi_exit_stat),
+	VCPU_STAT(mmio_exit_user),
+	VCPU_STAT(mmio_exit_kernel),
+	VCPU_STAT(exits),
 	{ NULL }
 };
 
@@ -49,7 +54,7 @@ static u64 core_reg_offset_from_id(u64 id)
 static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 {
 	u32 __user *uaddr = (u32 __user *)(long)reg->addr;
-	struct kvm_regs *regs = &vcpu->arch.regs;
+	struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs;
 	u64 off;
 
 	if (KVM_REG_SIZE(reg->id) != 4)
@@ -66,7 +71,7 @@ static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 {
 	u32 __user *uaddr = (u32 __user *)(long)reg->addr;
-	struct kvm_regs *regs = &vcpu->arch.regs;
+	struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs;
 	u64 off, val;
 
 	if (KVM_REG_SIZE(reg->id) != 4)
@@ -155,7 +160,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	u64 val;
 
 	val = kvm_arm_timer_get_reg(vcpu, reg->id);
-	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id));
+	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
 }
 
 static unsigned long num_core_regs(void)
@@ -177,7 +182,7 @@ unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu)
 /**
  * kvm_arm_copy_reg_indices - get indices of all registers.
  *
- * We do core registers right here, then we apppend coproc regs.
+ * We do core registers right here, then we append coproc regs.
  */
 int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
 {
@@ -290,3 +295,9 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 {
 	return -EINVAL;
 }
+
+int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
+					struct kvm_guest_debug *dbg)
+{
+	return -EINVAL;
+}
diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c
index 95f12b2cc..3f1ef0dbc 100644
--- a/arch/arm/kvm/handle_exit.c
+++ b/arch/arm/kvm/handle_exit.c
@@ -42,6 +42,7 @@ static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 	trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0),
 		      kvm_vcpu_hvc_get_imm(vcpu));
+	vcpu->stat.hvc_exit_stat++;
 
 	ret = kvm_psci_call(vcpu);
 	if (ret < 0) {
@@ -89,9 +90,11 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	if (kvm_vcpu_get_hsr(vcpu) & HSR_WFI_IS_WFE) {
 		trace_kvm_wfx(*vcpu_pc(vcpu), true);
+		vcpu->stat.wfe_exit_stat++;
 		kvm_vcpu_on_spin(vcpu);
 	} else {
 		trace_kvm_wfx(*vcpu_pc(vcpu), false);
+		vcpu->stat.wfi_exit_stat++;
 		kvm_vcpu_block(vcpu);
 	}
 
@@ -144,13 +147,6 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
 	switch (exception_index) {
 	case ARM_EXCEPTION_IRQ:
 		return 1;
-	case ARM_EXCEPTION_UNDEFINED:
-		kvm_err("Undefined exception in Hyp mode at: %#08lx\n",
-			kvm_vcpu_get_hyp_pc(vcpu));
-		BUG();
-		panic("KVM: Hypervisor undefined exception!\n");
-	case ARM_EXCEPTION_DATA_ABORT:
-	case ARM_EXCEPTION_PREF_ABORT:
 	case ARM_EXCEPTION_HVC:
 		/*
 		 * See ARM ARM B1.14.1: "Hyp traps on instructions
diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile
new file mode 100644
index 000000000..8dfa5f7f9
--- /dev/null
+++ b/arch/arm/kvm/hyp/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for Kernel-based Virtual Machine module, HYP part
+#
+
+KVM=../../../../virt/kvm
+
+obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o
+
+obj-$(CONFIG_KVM_ARM_HOST) += tlb.o
+obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += vfp.o
+obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += entry.o
+obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o
+obj-$(CONFIG_KVM_ARM_HOST) += switch.o
+obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o
diff --git a/arch/arm/kvm/hyp/banked-sr.c b/arch/arm/kvm/hyp/banked-sr.c
new file mode 100644
index 000000000..111bda8cd
--- /dev/null
+++ b/arch/arm/kvm/hyp/banked-sr.c
@@ -0,0 +1,77 @@
+/*
+ * Original code:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/kvm_hyp.h>
+
+__asm__(".arch_extension     virt");
+
+void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt->gp_regs.usr_regs.ARM_sp	= read_special(SP_usr);
+	ctxt->gp_regs.usr_regs.ARM_pc	= read_special(ELR_hyp);
+	ctxt->gp_regs.usr_regs.ARM_cpsr	= read_special(SPSR);
+	ctxt->gp_regs.KVM_ARM_SVC_sp	= read_special(SP_svc);
+	ctxt->gp_regs.KVM_ARM_SVC_lr	= read_special(LR_svc);
+	ctxt->gp_regs.KVM_ARM_SVC_spsr	= read_special(SPSR_svc);
+	ctxt->gp_regs.KVM_ARM_ABT_sp	= read_special(SP_abt);
+	ctxt->gp_regs.KVM_ARM_ABT_lr	= read_special(LR_abt);
+	ctxt->gp_regs.KVM_ARM_ABT_spsr	= read_special(SPSR_abt);
+	ctxt->gp_regs.KVM_ARM_UND_sp	= read_special(SP_und);
+	ctxt->gp_regs.KVM_ARM_UND_lr	= read_special(LR_und);
+	ctxt->gp_regs.KVM_ARM_UND_spsr	= read_special(SPSR_und);
+	ctxt->gp_regs.KVM_ARM_IRQ_sp	= read_special(SP_irq);
+	ctxt->gp_regs.KVM_ARM_IRQ_lr	= read_special(LR_irq);
+	ctxt->gp_regs.KVM_ARM_IRQ_spsr	= read_special(SPSR_irq);
+	ctxt->gp_regs.KVM_ARM_FIQ_r8	= read_special(R8_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_r9	= read_special(R9_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_r10	= read_special(R10_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_fp	= read_special(R11_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_ip	= read_special(R12_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_sp	= read_special(SP_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_lr	= read_special(LR_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_spsr	= read_special(SPSR_fiq);
+}
+
+void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt)
+{
+	write_special(ctxt->gp_regs.usr_regs.ARM_sp,	SP_usr);
+	write_special(ctxt->gp_regs.usr_regs.ARM_pc,	ELR_hyp);
+	write_special(ctxt->gp_regs.usr_regs.ARM_cpsr,	SPSR_cxsf);
+	write_special(ctxt->gp_regs.KVM_ARM_SVC_sp,	SP_svc);
+	write_special(ctxt->gp_regs.KVM_ARM_SVC_lr,	LR_svc);
+	write_special(ctxt->gp_regs.KVM_ARM_SVC_spsr,	SPSR_svc);
+	write_special(ctxt->gp_regs.KVM_ARM_ABT_sp,	SP_abt);
+	write_special(ctxt->gp_regs.KVM_ARM_ABT_lr,	LR_abt);
+	write_special(ctxt->gp_regs.KVM_ARM_ABT_spsr,	SPSR_abt);
+	write_special(ctxt->gp_regs.KVM_ARM_UND_sp,	SP_und);
+	write_special(ctxt->gp_regs.KVM_ARM_UND_lr,	LR_und);
+	write_special(ctxt->gp_regs.KVM_ARM_UND_spsr,	SPSR_und);
+	write_special(ctxt->gp_regs.KVM_ARM_IRQ_sp,	SP_irq);
+	write_special(ctxt->gp_regs.KVM_ARM_IRQ_lr,	LR_irq);
+	write_special(ctxt->gp_regs.KVM_ARM_IRQ_spsr,	SPSR_irq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_r8,	R8_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_r9,	R9_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_r10,	R10_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_fp,	R11_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_ip,	R12_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_sp,	SP_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_lr,	LR_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_spsr,	SPSR_fiq);
+}
diff --git a/arch/arm/kvm/hyp/cp15-sr.c b/arch/arm/kvm/hyp/cp15-sr.c
new file mode 100644
index 000000000..c47828127
--- /dev/null
+++ b/arch/arm/kvm/hyp/cp15-sr.c
@@ -0,0 +1,84 @@
+/*
+ * Original code:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/kvm_hyp.h>
+
+static u64 *cp15_64(struct kvm_cpu_context *ctxt, int idx)
+{
+	return (u64 *)(ctxt->cp15 + idx);
+}
+
+void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt->cp15[c0_MPIDR]		= read_sysreg(VMPIDR);
+	ctxt->cp15[c0_CSSELR]		= read_sysreg(CSSELR);
+	ctxt->cp15[c1_SCTLR]		= read_sysreg(SCTLR);
+	ctxt->cp15[c1_CPACR]		= read_sysreg(CPACR);
+	*cp15_64(ctxt, c2_TTBR0)	= read_sysreg(TTBR0);
+	*cp15_64(ctxt, c2_TTBR1)	= read_sysreg(TTBR1);
+	ctxt->cp15[c2_TTBCR]		= read_sysreg(TTBCR);
+	ctxt->cp15[c3_DACR]		= read_sysreg(DACR);
+	ctxt->cp15[c5_DFSR]		= read_sysreg(DFSR);
+	ctxt->cp15[c5_IFSR]		= read_sysreg(IFSR);
+	ctxt->cp15[c5_ADFSR]		= read_sysreg(ADFSR);
+	ctxt->cp15[c5_AIFSR]		= read_sysreg(AIFSR);
+	ctxt->cp15[c6_DFAR]		= read_sysreg(DFAR);
+	ctxt->cp15[c6_IFAR]		= read_sysreg(IFAR);
+	*cp15_64(ctxt, c7_PAR)		= read_sysreg(PAR);
+	ctxt->cp15[c10_PRRR]		= read_sysreg(PRRR);
+	ctxt->cp15[c10_NMRR]		= read_sysreg(NMRR);
+	ctxt->cp15[c10_AMAIR0]		= read_sysreg(AMAIR0);
+	ctxt->cp15[c10_AMAIR1]		= read_sysreg(AMAIR1);
+	ctxt->cp15[c12_VBAR]		= read_sysreg(VBAR);
+	ctxt->cp15[c13_CID]		= read_sysreg(CID);
+	ctxt->cp15[c13_TID_URW]		= read_sysreg(TID_URW);
+	ctxt->cp15[c13_TID_URO]		= read_sysreg(TID_URO);
+	ctxt->cp15[c13_TID_PRIV]	= read_sysreg(TID_PRIV);
+	ctxt->cp15[c14_CNTKCTL]		= read_sysreg(CNTKCTL);
+}
+
+void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt)
+{
+	write_sysreg(ctxt->cp15[c0_MPIDR],	VMPIDR);
+	write_sysreg(ctxt->cp15[c0_CSSELR],	CSSELR);
+	write_sysreg(ctxt->cp15[c1_SCTLR],	SCTLR);
+	write_sysreg(ctxt->cp15[c1_CPACR],	CPACR);
+	write_sysreg(*cp15_64(ctxt, c2_TTBR0),	TTBR0);
+	write_sysreg(*cp15_64(ctxt, c2_TTBR1),	TTBR1);
+	write_sysreg(ctxt->cp15[c2_TTBCR],	TTBCR);
+	write_sysreg(ctxt->cp15[c3_DACR],	DACR);
+	write_sysreg(ctxt->cp15[c5_DFSR],	DFSR);
+	write_sysreg(ctxt->cp15[c5_IFSR],	IFSR);
+	write_sysreg(ctxt->cp15[c5_ADFSR],	ADFSR);
+	write_sysreg(ctxt->cp15[c5_AIFSR],	AIFSR);
+	write_sysreg(ctxt->cp15[c6_DFAR],	DFAR);
+	write_sysreg(ctxt->cp15[c6_IFAR],	IFAR);
+	write_sysreg(*cp15_64(ctxt, c7_PAR),	PAR);
+	write_sysreg(ctxt->cp15[c10_PRRR],	PRRR);
+	write_sysreg(ctxt->cp15[c10_NMRR],	NMRR);
+	write_sysreg(ctxt->cp15[c10_AMAIR0],	AMAIR0);
+	write_sysreg(ctxt->cp15[c10_AMAIR1],	AMAIR1);
+	write_sysreg(ctxt->cp15[c12_VBAR],	VBAR);
+	write_sysreg(ctxt->cp15[c13_CID],	CID);
+	write_sysreg(ctxt->cp15[c13_TID_URW],	TID_URW);
+	write_sysreg(ctxt->cp15[c13_TID_URO],	TID_URO);
+	write_sysreg(ctxt->cp15[c13_TID_PRIV],	TID_PRIV);
+	write_sysreg(ctxt->cp15[c14_CNTKCTL],	CNTKCTL);
+}
diff --git a/arch/arm/kvm/hyp/entry.S b/arch/arm/kvm/hyp/entry.S
new file mode 100644
index 000000000..21c238871
--- /dev/null
+++ b/arch/arm/kvm/hyp/entry.S
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/kvm_arm.h>
+
+	.arch_extension     virt
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+#define USR_REGS_OFFSET		(CPU_CTXT_GP_REGS + GP_REGS_USR)
+
+/* int __guest_enter(struct kvm_vcpu *vcpu, struct kvm_cpu_context *host) */
+ENTRY(__guest_enter)
+	@ Save host registers
+	add	r1, r1, #(USR_REGS_OFFSET + S_R4)
+	stm	r1!, {r4-r12}
+	str	lr, [r1, #4]	@ Skip SP_usr (already saved)
+
+	@ Restore guest registers
+	add	r0, r0,  #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0)
+	ldr	lr, [r0, #S_LR]
+	ldm	r0, {r0-r12}
+
+	clrex
+	eret
+ENDPROC(__guest_enter)
+
+ENTRY(__guest_exit)
+	/*
+	 * return convention:
+	 * guest r0, r1, r2 saved on the stack
+	 * r0: vcpu pointer
+	 * r1: exception code
+	 */
+
+	add	r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R3)
+	stm	r2!, {r3-r12}
+	str	lr, [r2, #4]
+	add	r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0)
+	pop	{r3, r4, r5}		@ r0, r1, r2
+	stm	r2, {r3-r5}
+
+	ldr	r0, [r0, #VCPU_HOST_CTXT]
+	add	r0, r0, #(USR_REGS_OFFSET + S_R4)
+	ldm	r0!, {r4-r12}
+	ldr	lr, [r0, #4]
+
+	mov	r0, r1
+	bx	lr
+ENDPROC(__guest_exit)
+
+/*
+ * If VFPv3 support is not available, then we will not switch the VFP
+ * registers; however cp10 and cp11 accesses will still trap and fallback
+ * to the regular coprocessor emulation code, which currently will
+ * inject an undefined exception to the guest.
+ */
+#ifdef CONFIG_VFPv3
+ENTRY(__vfp_guest_restore)
+	push	{r3, r4, lr}
+
+	@ NEON/VFP used.  Turn on VFP access.
+	mrc	p15, 4, r1, c1, c1, 2		@ HCPTR
+	bic	r1, r1, #(HCPTR_TCP(10) | HCPTR_TCP(11))
+	mcr	p15, 4, r1, c1, c1, 2		@ HCPTR
+	isb
+
+	@ Switch VFP/NEON hardware state to the guest's
+	mov	r4, r0
+	ldr	r0, [r0, #VCPU_HOST_CTXT]
+	add	r0, r0, #CPU_CTXT_VFP
+	bl	__vfp_save_state
+	add	r0, r4, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP)
+	bl	__vfp_restore_state
+
+	pop	{r3, r4, lr}
+	pop	{r0, r1, r2}
+	clrex
+	eret
+ENDPROC(__vfp_guest_restore)
+#endif
+
+	.popsection
+
diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S
new file mode 100644
index 000000000..78091383a
--- /dev/null
+++ b/arch/arm/kvm/hyp/hyp-entry.S
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+
+	.arch_extension     virt
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+.macro load_vcpu	reg
+	mrc	p15, 4, \reg, c13, c0, 2	@ HTPIDR
+.endm
+
+/********************************************************************
+ * Hypervisor exception vector and handlers
+ *
+ *
+ * The KVM/ARM Hypervisor ABI is defined as follows:
+ *
+ * Entry to Hyp mode from the host kernel will happen _only_ when an HVC
+ * instruction is issued since all traps are disabled when running the host
+ * kernel as per the Hyp-mode initialization at boot time.
+ *
+ * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc
+ * below) when the HVC instruction is called from SVC mode (i.e. a guest or the
+ * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC
+ * instructions are called from within Hyp-mode.
+ *
+ * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
+ *    Switching to Hyp mode is done through a simple HVC #0 instruction. The
+ *    exception vector code will check that the HVC comes from VMID==0.
+ *    - r0 contains a pointer to a HYP function
+ *    - r1, r2, and r3 contain arguments to the above function.
+ *    - The HYP function will be called with its arguments in r0, r1 and r2.
+ *    On HYP function return, we return directly to SVC.
+ *
+ * Note that the above is used to execute code in Hyp-mode from a host-kernel
+ * point of view, and is a different concept from performing a world-switch and
+ * executing guest code SVC mode (with a VMID != 0).
+ */
+
+	.align 5
+__kvm_hyp_vector:
+	.global __kvm_hyp_vector
+
+	@ Hyp-mode exception vector
+	W(b)	hyp_reset
+	W(b)	hyp_undef
+	W(b)	hyp_svc
+	W(b)	hyp_pabt
+	W(b)	hyp_dabt
+	W(b)	hyp_hvc
+	W(b)	hyp_irq
+	W(b)	hyp_fiq
+
+.macro invalid_vector label, cause
+	.align
+\label:	mov	r0, #\cause
+	b	__hyp_panic
+.endm
+
+	invalid_vector	hyp_reset	ARM_EXCEPTION_RESET
+	invalid_vector	hyp_undef	ARM_EXCEPTION_UNDEFINED
+	invalid_vector	hyp_svc		ARM_EXCEPTION_SOFTWARE
+	invalid_vector	hyp_pabt	ARM_EXCEPTION_PREF_ABORT
+	invalid_vector	hyp_dabt	ARM_EXCEPTION_DATA_ABORT
+	invalid_vector	hyp_fiq		ARM_EXCEPTION_FIQ
+
+ENTRY(__hyp_do_panic)
+	mrs	lr, cpsr
+	bic	lr, lr, #MODE_MASK
+	orr	lr, lr, #SVC_MODE
+THUMB(	orr	lr, lr, #PSR_T_BIT	)
+	msr	spsr_cxsf, lr
+	ldr	lr, =panic
+	msr	ELR_hyp, lr
+	ldr	lr, =kvm_call_hyp
+	clrex
+	eret
+ENDPROC(__hyp_do_panic)
+
+hyp_hvc:
+	/*
+	 * Getting here is either because of a trap from a guest,
+	 * or from executing HVC from the host kernel, which means
+	 * "do something in Hyp mode".
+	 */
+	push	{r0, r1, r2}
+
+	@ Check syndrome register
+	mrc	p15, 4, r1, c5, c2, 0	@ HSR
+	lsr	r0, r1, #HSR_EC_SHIFT
+	cmp	r0, #HSR_EC_HVC
+	bne	guest_trap		@ Not HVC instr.
+
+	/*
+	 * Let's check if the HVC came from VMID 0 and allow simple
+	 * switch to Hyp mode
+	 */
+	mrrc    p15, 6, r0, r2, c2
+	lsr     r2, r2, #16
+	and     r2, r2, #0xff
+	cmp     r2, #0
+	bne	guest_trap		@ Guest called HVC
+
+	/*
+	 * Getting here means host called HVC, we shift parameters and branch
+	 * to Hyp function.
+	 */
+	pop	{r0, r1, r2}
+
+	/* Check for __hyp_get_vectors */
+	cmp	r0, #-1
+	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
+	beq	1f
+
+	push	{lr}
+
+	mov	lr, r0
+	mov	r0, r1
+	mov	r1, r2
+	mov	r2, r3
+
+THUMB(	orr	lr, #1)
+	blx	lr			@ Call the HYP function
+
+	pop	{lr}
+1:	eret
+
+guest_trap:
+	load_vcpu r0			@ Load VCPU pointer to r0
+
+#ifdef CONFIG_VFPv3
+	@ Check for a VFP access
+	lsr	r1, r1, #HSR_EC_SHIFT
+	cmp	r1, #HSR_EC_CP_0_13
+	beq	__vfp_guest_restore
+#endif
+
+	mov	r1, #ARM_EXCEPTION_HVC
+	b	__guest_exit
+
+hyp_irq:
+	push	{r0, r1, r2}
+	mov	r1, #ARM_EXCEPTION_IRQ
+	load_vcpu r0			@ Load VCPU pointer to r0
+	b	__guest_exit
+
+	.ltorg
+
+	.popsection
diff --git a/arch/arm/kvm/hyp/s2-setup.c b/arch/arm/kvm/hyp/s2-setup.c
new file mode 100644
index 000000000..7be39af2e
--- /dev/null
+++ b/arch/arm/kvm/hyp/s2-setup.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2016 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/types.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+
+void __hyp_text __init_stage2_translation(void)
+{
+	u64 val;
+
+	val = read_sysreg(VTCR) & ~VTCR_MASK;
+
+	val |= read_sysreg(HTCR) & VTCR_HTCR_SH;
+	val |= KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S;
+
+	write_sysreg(val, VTCR);
+}
diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c
new file mode 100644
index 000000000..b13caa90c
--- /dev/null
+++ b/arch/arm/kvm/hyp/switch.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+
+__asm__(".arch_extension     virt");
+
+/*
+ * Activate the traps, saving the host's fpexc register before
+ * overwriting it. We'll restore it on VM exit.
+ */
+static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu, u32 *fpexc_host)
+{
+	u32 val;
+
+	/*
+	 * We are about to set HCPTR.TCP10/11 to trap all floating point
+	 * register accesses to HYP, however, the ARM ARM clearly states that
+	 * traps are only taken to HYP if the operation would not otherwise
+	 * trap to SVC.  Therefore, always make sure that for 32-bit guests,
+	 * we set FPEXC.EN to prevent traps to SVC, when setting the TCP bits.
+	 */
+	val = read_sysreg(VFP_FPEXC);
+	*fpexc_host = val;
+	if (!(val & FPEXC_EN)) {
+		write_sysreg(val | FPEXC_EN, VFP_FPEXC);
+		isb();
+	}
+
+	write_sysreg(vcpu->arch.hcr | vcpu->arch.irq_lines, HCR);
+	/* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */
+	write_sysreg(HSTR_T(15), HSTR);
+	write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR);
+	val = read_sysreg(HDCR);
+	write_sysreg(val | HDCR_TPM | HDCR_TPMCR, HDCR);
+}
+
+static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
+{
+	u32 val;
+
+	write_sysreg(0, HCR);
+	write_sysreg(0, HSTR);
+	val = read_sysreg(HDCR);
+	write_sysreg(val & ~(HDCR_TPM | HDCR_TPMCR), HDCR);
+	write_sysreg(0, HCPTR);
+}
+
+static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = kern_hyp_va(vcpu->kvm);
+	write_sysreg(kvm->arch.vttbr, VTTBR);
+	write_sysreg(vcpu->arch.midr, VPIDR);
+}
+
+static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu)
+{
+	write_sysreg(0, VTTBR);
+	write_sysreg(read_sysreg(MIDR), VPIDR);
+}
+
+static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu)
+{
+	__vgic_v2_save_state(vcpu);
+}
+
+static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu)
+{
+	__vgic_v2_restore_state(vcpu);
+}
+
+static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
+{
+	u32 hsr = read_sysreg(HSR);
+	u8 ec = hsr >> HSR_EC_SHIFT;
+	u32 hpfar, far;
+
+	vcpu->arch.fault.hsr = hsr;
+
+	if (ec == HSR_EC_IABT)
+		far = read_sysreg(HIFAR);
+	else if (ec == HSR_EC_DABT)
+		far = read_sysreg(HDFAR);
+	else
+		return true;
+
+	/*
+	 * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode:
+	 *
+	 * Abort on the stage 2 translation for a memory access from a
+	 * Non-secure PL1 or PL0 mode:
+	 *
+	 * For any Access flag fault or Translation fault, and also for any
+	 * Permission fault on the stage 2 translation of a memory access
+	 * made as part of a translation table walk for a stage 1 translation,
+	 * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR
+	 * is UNKNOWN.
+	 */
+	if (!(hsr & HSR_DABT_S1PTW) && (hsr & HSR_FSC_TYPE) == FSC_PERM) {
+		u64 par, tmp;
+
+		par = read_sysreg(PAR);
+		write_sysreg(far, ATS1CPR);
+		isb();
+
+		tmp = read_sysreg(PAR);
+		write_sysreg(par, PAR);
+
+		if (unlikely(tmp & 1))
+			return false; /* Translation failed, back to guest */
+
+		hpfar = ((tmp >> 12) & ((1UL << 28) - 1)) << 4;
+	} else {
+		hpfar = read_sysreg(HPFAR);
+	}
+
+	vcpu->arch.fault.hxfar = far;
+	vcpu->arch.fault.hpfar = hpfar;
+	return true;
+}
+
+static int __hyp_text __guest_run(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *host_ctxt;
+	struct kvm_cpu_context *guest_ctxt;
+	bool fp_enabled;
+	u64 exit_code;
+	u32 fpexc;
+
+	vcpu = kern_hyp_va(vcpu);
+	write_sysreg(vcpu, HTPIDR);
+
+	host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
+	guest_ctxt = &vcpu->arch.ctxt;
+
+	__sysreg_save_state(host_ctxt);
+	__banked_save_state(host_ctxt);
+
+	__activate_traps(vcpu, &fpexc);
+	__activate_vm(vcpu);
+
+	__vgic_restore_state(vcpu);
+	__timer_restore_state(vcpu);
+
+	__sysreg_restore_state(guest_ctxt);
+	__banked_restore_state(guest_ctxt);
+
+	/* Jump in the fire! */
+again:
+	exit_code = __guest_enter(vcpu, host_ctxt);
+	/* And we're baaack! */
+
+	if (exit_code == ARM_EXCEPTION_HVC && !__populate_fault_info(vcpu))
+		goto again;
+
+	fp_enabled = __vfp_enabled();
+
+	__banked_save_state(guest_ctxt);
+	__sysreg_save_state(guest_ctxt);
+	__timer_save_state(vcpu);
+	__vgic_save_state(vcpu);
+
+	__deactivate_traps(vcpu);
+	__deactivate_vm(vcpu);
+
+	__banked_restore_state(host_ctxt);
+	__sysreg_restore_state(host_ctxt);
+
+	if (fp_enabled) {
+		__vfp_save_state(&guest_ctxt->vfp);
+		__vfp_restore_state(&host_ctxt->vfp);
+	}
+
+	write_sysreg(fpexc, VFP_FPEXC);
+
+	return exit_code;
+}
+
+__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
+
+static const char * const __hyp_panic_string[] = {
+	[ARM_EXCEPTION_RESET]      = "\nHYP panic: RST   PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_UNDEFINED]  = "\nHYP panic: UNDEF PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_SOFTWARE]   = "\nHYP panic: SVC   PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_PREF_ABORT] = "\nHYP panic: PABRT PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_DATA_ABORT] = "\nHYP panic: DABRT PC:%08x ADDR:%08x",
+	[ARM_EXCEPTION_IRQ]        = "\nHYP panic: IRQ   PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_FIQ]        = "\nHYP panic: FIQ   PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_HVC]        = "\nHYP panic: HVC   PC:%08x CPSR:%08x",
+};
+
+void __hyp_text __noreturn __hyp_panic(int cause)
+{
+	u32 elr = read_special(ELR_hyp);
+	u32 val;
+
+	if (cause == ARM_EXCEPTION_DATA_ABORT)
+		val = read_sysreg(HDFAR);
+	else
+		val = read_special(SPSR);
+
+	if (read_sysreg(VTTBR)) {
+		struct kvm_vcpu *vcpu;
+		struct kvm_cpu_context *host_ctxt;
+
+		vcpu = (struct kvm_vcpu *)read_sysreg(HTPIDR);
+		host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
+		__deactivate_traps(vcpu);
+		__deactivate_vm(vcpu);
+		__sysreg_restore_state(host_ctxt);
+	}
+
+	/* Call panic for real */
+	__hyp_do_panic(__hyp_panic_string[cause], elr, val);
+
+	unreachable();
+}
diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c
new file mode 100644
index 000000000..a2636001e
--- /dev/null
+++ b/arch/arm/kvm/hyp/tlb.c
@@ -0,0 +1,70 @@
+/*
+ * Original code:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/kvm_hyp.h>
+
+/**
+ * Flush per-VMID TLBs
+ *
+ * __kvm_tlb_flush_vmid(struct kvm *kvm);
+ *
+ * We rely on the hardware to broadcast the TLB invalidation to all CPUs
+ * inside the inner-shareable domain (which is the case for all v7
+ * implementations).  If we come across a non-IS SMP implementation, we'll
+ * have to use an IPI based mechanism. Until then, we stick to the simple
+ * hardware assisted version.
+ *
+ * As v7 does not support flushing per IPA, just nuke the whole TLB
+ * instead, ignoring the ipa value.
+ */
+static void __hyp_text __tlb_flush_vmid(struct kvm *kvm)
+{
+	dsb(ishst);
+
+	/* Switch to requested VMID */
+	kvm = kern_hyp_va(kvm);
+	write_sysreg(kvm->arch.vttbr, VTTBR);
+	isb();
+
+	write_sysreg(0, TLBIALLIS);
+	dsb(ish);
+	isb();
+
+	write_sysreg(0, VTTBR);
+}
+
+__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm);
+
+static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
+{
+	__tlb_flush_vmid(kvm);
+}
+
+__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm,
+							    phys_addr_t ipa);
+
+static void __hyp_text __tlb_flush_vm_context(void)
+{
+	write_sysreg(0, TLBIALLNSNHIS);
+	write_sysreg(0, ICIALLUIS);
+	dsb(ish);
+}
+
+__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void);
diff --git a/arch/arm/kvm/hyp/vfp.S b/arch/arm/kvm/hyp/vfp.S
new file mode 100644
index 000000000..7c297e87e
--- /dev/null
+++ b/arch/arm/kvm/hyp/vfp.S
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <asm/vfpmacros.h>
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+/* void __vfp_save_state(struct vfp_hard_struct *vfp); */
+ENTRY(__vfp_save_state)
+	push	{r4, r5}
+	VFPFMRX	r1, FPEXC
+
+	@ Make sure *really* VFP is enabled so we can touch the registers.
+	orr	r5, r1, #FPEXC_EN
+	tst	r5, #FPEXC_EX		@ Check for VFP Subarchitecture
+	bic	r5, r5, #FPEXC_EX	@ FPEXC_EX disable
+	VFPFMXR	FPEXC, r5
+	isb
+
+	VFPFMRX	r2, FPSCR
+	beq	1f
+
+	@ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so
+	@ we only need to save them if FPEXC_EX is set.
+	VFPFMRX r3, FPINST
+	tst	r5, #FPEXC_FP2V
+	VFPFMRX r4, FPINST2, ne		@ vmrsne
+1:
+	VFPFSTMIA r0, r5		@ Save VFP registers
+	stm	r0, {r1-r4}		@ Save FPEXC, FPSCR, FPINST, FPINST2
+	pop	{r4, r5}
+	bx	lr
+ENDPROC(__vfp_save_state)
+
+/* void __vfp_restore_state(struct vfp_hard_struct *vfp);
+ * Assume FPEXC_EN is on and FPEXC_EX is off */
+ENTRY(__vfp_restore_state)
+	VFPFLDMIA r0, r1		@ Load VFP registers
+	ldm	r0, {r0-r3}		@ Load FPEXC, FPSCR, FPINST, FPINST2
+
+	VFPFMXR FPSCR, r1
+	tst	r0, #FPEXC_EX		@ Check for VFP Subarchitecture
+	beq	1f
+	VFPFMXR FPINST, r2
+	tst	r0, #FPEXC_FP2V
+	VFPFMXR FPINST2, r3, ne
+1:
+	VFPFMXR FPEXC, r0		@ FPEXC	(last, in case !EN)
+	bx	lr
+ENDPROC(__vfp_restore_state)
+
+	.popsection
diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S
index 3988e72d1..bf89c919e 100644
--- a/arch/arm/kvm/init.S
+++ b/arch/arm/kvm/init.S
@@ -32,23 +32,13 @@
  *       r2,r3 = Hypervisor pgd pointer
  *
  * The init scenario is:
- * - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd,
- *   runtime stack, runtime vectors
- * - Enable the MMU with the boot pgd
- * - Jump to a target into the trampoline page (remember, this is the same
- *   physical page!)
- * - Now switch to the runtime pgd (same VA, and still the same physical
- *   page!)
+ * - We jump in HYP with 3 parameters: runtime HYP pgd, runtime stack,
+ *   runtime vectors
  * - Invalidate TLBs
  * - Set stack and vectors
+ * - Setup the page tables
+ * - Enable the MMU
  * - Profit! (or eret, if you only care about the code).
- *
- * As we only have four registers available to pass parameters (and we
- * need six), we split the init in two phases:
- * - Phase 1: r0 = 0, r1 = 0, r2,r3 contain the boot PGD.
- *   Provides the basic HYP init, and enable the MMU.
- * - Phase 2: r0 = ToS, r1 = vectors, r2,r3 contain the runtime PGD.
- *   Switches to the runtime PGD, set stack and vectors.
  */
 
 	.text
@@ -68,8 +58,11 @@ __kvm_hyp_init:
 	W(b)	.
 
 __do_hyp_init:
-	cmp	r0, #0			@ We have a SP?
-	bne	phase2			@ Yes, second stage init
+	@ Set stack pointer
+	mov	sp, r0
+
+	@ Set HVBAR to point to the HYP vectors
+	mcr	p15, 4, r1, c12, c0, 0	@ HVBAR
 
 	@ Set the HTTBR to point to the hypervisor PGD pointer passed
 	mcrr	p15, 4, rr_lo_hi(r2, r3), c2
@@ -84,14 +77,6 @@ __do_hyp_init:
 	orr	r0, r0, r1
 	mcr	p15, 4, r0, c2, c0, 2	@ HTCR
 
-	mrc	p15, 4, r1, c2, c1, 2	@ VTCR
-	ldr	r2, =VTCR_MASK
-	bic	r1, r1, r2
-	bic	r0, r0, #(~VTCR_HTCR_SH)	@ clear non-reusable HTCR bits
-	orr	r1, r0, r1
-	orr	r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S)
-	mcr	p15, 4, r1, c2, c1, 2	@ VTCR
-
 	@ Use the same memory attributes for hyp. accesses as the kernel
 	@ (copy MAIRx ro HMAIRx).
 	mrc	p15, 0, r0, c10, c2, 0
@@ -122,34 +107,25 @@ __do_hyp_init:
  THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE)		)
 	orr	r1, r1, r2
 	orr	r0, r0, r1
-	isb
 	mcr	p15, 4, r0, c1, c0, 0	@ HSCR
+	isb
 
-	@ End of init phase-1
 	eret
 
-phase2:
-	@ Set stack pointer
-	mov	sp, r0
-
-	@ Set HVBAR to point to the HYP vectors
-	mcr	p15, 4, r1, c12, c0, 0	@ HVBAR
-
-	@ Jump to the trampoline page
-	ldr	r0, =TRAMPOLINE_VA
-	adr	r1, target
-	bfi	r0, r1, #0, #PAGE_SHIFT
-	ret	r0
+	@ r0 : stub vectors address
+ENTRY(__kvm_hyp_reset)
+	/* We're now in idmap, disable MMU */
+	mrc	p15, 4, r1, c1, c0, 0	@ HSCTLR
+	ldr	r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_C | HSCTLR_I)
+	bic	r1, r1, r2
+	mcr	p15, 4, r1, c1, c0, 0	@ HSCTLR
 
-target:	@ We're now in the trampoline code, switch page tables
-	mcrr	p15, 4, rr_lo_hi(r2, r3), c2
+	/* Install stub vectors */
+	mcr	p15, 4, r0, c12, c0, 0	@ HVBAR
 	isb
 
-	@ Invalidate the old TLBs
-	mcr	p15, 4, r0, c8, c7, 0	@ TLBIALLH
-	dsb	ish
-
 	eret
+ENDPROC(__kvm_hyp_reset)
 
 	.ltorg
 
diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S
index 568494dbb..b1bd316f1 100644
--- a/arch/arm/kvm/interrupts.S
+++ b/arch/arm/kvm/interrupts.S
@@ -17,211 +17,14 @@
  */
 
 #include <linux/linkage.h>
-#include <linux/const.h>
-#include <asm/unified.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-#include <asm/kvm_asm.h>
-#include <asm/kvm_arm.h>
-#include <asm/vfpmacros.h>
-#include "interrupts_head.S"
 
 	.text
 
-__kvm_hyp_code_start:
-	.globl __kvm_hyp_code_start
-
-/********************************************************************
- * Flush per-VMID TLBs
- *
- * void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
- *
- * We rely on the hardware to broadcast the TLB invalidation to all CPUs
- * inside the inner-shareable domain (which is the case for all v7
- * implementations).  If we come across a non-IS SMP implementation, we'll
- * have to use an IPI based mechanism. Until then, we stick to the simple
- * hardware assisted version.
- *
- * As v7 does not support flushing per IPA, just nuke the whole TLB
- * instead, ignoring the ipa value.
- */
-ENTRY(__kvm_tlb_flush_vmid_ipa)
-	push	{r2, r3}
-
-	dsb	ishst
-	add	r0, r0, #KVM_VTTBR
-	ldrd	r2, r3, [r0]
-	mcrr	p15, 6, rr_lo_hi(r2, r3), c2	@ Write VTTBR
-	isb
-	mcr     p15, 0, r0, c8, c3, 0	@ TLBIALLIS (rt ignored)
-	dsb	ish
-	isb
-	mov	r2, #0
-	mov	r3, #0
-	mcrr	p15, 6, r2, r3, c2	@ Back to VMID #0
-	isb				@ Not necessary if followed by eret
-
-	pop	{r2, r3}
-	bx	lr
-ENDPROC(__kvm_tlb_flush_vmid_ipa)
-
-/**
- * void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs
- *
- * Reuses __kvm_tlb_flush_vmid_ipa() for ARMv7, without passing address
- * parameter
- */
-
-ENTRY(__kvm_tlb_flush_vmid)
-	b	__kvm_tlb_flush_vmid_ipa
-ENDPROC(__kvm_tlb_flush_vmid)
-
-/********************************************************************
- * Flush TLBs and instruction caches of all CPUs inside the inner-shareable
- * domain, for all VMIDs
- *
- * void __kvm_flush_vm_context(void);
- */
-ENTRY(__kvm_flush_vm_context)
-	mov	r0, #0			@ rn parameter for c15 flushes is SBZ
-
-	/* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */
-	mcr     p15, 4, r0, c8, c3, 4
-	/* Invalidate instruction caches Inner Shareable (ICIALLUIS) */
-	mcr     p15, 0, r0, c7, c1, 0
-	dsb	ish
-	isb				@ Not necessary if followed by eret
-
-	bx	lr
-ENDPROC(__kvm_flush_vm_context)
-
-
-/********************************************************************
- *  Hypervisor world-switch code
- *
- *
- * int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
- */
-ENTRY(__kvm_vcpu_run)
-	@ Save the vcpu pointer
-	mcr	p15, 4, vcpu, c13, c0, 2	@ HTPIDR
-
-	save_host_regs
-
-	restore_vgic_state
-	restore_timer_state
-
-	@ Store hardware CP15 state and load guest state
-	read_cp15_state store_to_vcpu = 0
-	write_cp15_state read_from_vcpu = 1
-
-	@ If the host kernel has not been configured with VFPv3 support,
-	@ then it is safer if we deny guests from using it as well.
-#ifdef CONFIG_VFPv3
-	@ Set FPEXC_EN so the guest doesn't trap floating point instructions
-	VFPFMRX r2, FPEXC		@ VMRS
-	push	{r2}
-	orr	r2, r2, #FPEXC_EN
-	VFPFMXR FPEXC, r2		@ VMSR
-#endif
-
-	@ Configure Hyp-role
-	configure_hyp_role vmentry
-
-	@ Trap coprocessor CRx accesses
-	set_hstr vmentry
-	set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11))
-	set_hdcr vmentry
-
-	@ Write configured ID register into MIDR alias
-	ldr	r1, [vcpu, #VCPU_MIDR]
-	mcr	p15, 4, r1, c0, c0, 0
-
-	@ Write guest view of MPIDR into VMPIDR
-	ldr	r1, [vcpu, #CP15_OFFSET(c0_MPIDR)]
-	mcr	p15, 4, r1, c0, c0, 5
-
-	@ Set up guest memory translation
-	ldr	r1, [vcpu, #VCPU_KVM]
-	add	r1, r1, #KVM_VTTBR
-	ldrd	r2, r3, [r1]
-	mcrr	p15, 6, rr_lo_hi(r2, r3), c2	@ Write VTTBR
-
-	@ We're all done, just restore the GPRs and go to the guest
-	restore_guest_regs
-	clrex				@ Clear exclusive monitor
-	eret
-
-__kvm_vcpu_return:
-	/*
-	 * return convention:
-	 * guest r0, r1, r2 saved on the stack
-	 * r0: vcpu pointer
-	 * r1: exception code
-	 */
-	save_guest_regs
-
-	@ Set VMID == 0
-	mov	r2, #0
-	mov	r3, #0
-	mcrr	p15, 6, r2, r3, c2	@ Write VTTBR
-
-	@ Don't trap coprocessor accesses for host kernel
-	set_hstr vmexit
-	set_hdcr vmexit
-	set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore
-
-#ifdef CONFIG_VFPv3
-	@ Switch VFP/NEON hardware state to the host's
-	add	r7, vcpu, #VCPU_VFP_GUEST
-	store_vfp_state r7
-	add	r7, vcpu, #VCPU_VFP_HOST
-	ldr	r7, [r7]
-	restore_vfp_state r7
-
-after_vfp_restore:
-	@ Restore FPEXC_EN which we clobbered on entry
-	pop	{r2}
-	VFPFMXR FPEXC, r2
-#else
-after_vfp_restore:
-#endif
-
-	@ Reset Hyp-role
-	configure_hyp_role vmexit
-
-	@ Let host read hardware MIDR
-	mrc	p15, 0, r2, c0, c0, 0
-	mcr	p15, 4, r2, c0, c0, 0
-
-	@ Back to hardware MPIDR
-	mrc	p15, 0, r2, c0, c0, 5
-	mcr	p15, 4, r2, c0, c0, 5
-
-	@ Store guest CP15 state and restore host state
-	read_cp15_state store_to_vcpu = 1
-	write_cp15_state read_from_vcpu = 0
-
-	save_timer_state
-	save_vgic_state
-
-	restore_host_regs
-	clrex				@ Clear exclusive monitor
-#ifndef CONFIG_CPU_ENDIAN_BE8
-	mov	r0, r1			@ Return the return code
-	mov	r1, #0			@ Clear upper bits in return value
-#else
-	@ r1 already has return code
-	mov	r0, #0			@ Clear upper bits in return value
-#endif /* CONFIG_CPU_ENDIAN_BE8 */
-	bx	lr			@ return to IOCTL
-
 /********************************************************************
  *  Call function in Hyp mode
  *
  *
- * u64 kvm_call_hyp(void *hypfn, ...);
+ * unsigned long kvm_call_hyp(void *hypfn, ...);
  *
  * This is not really a variadic function in the classic C-way and care must
  * be taken when calling this to ensure parameters are passed in registers
@@ -232,7 +35,7 @@ after_vfp_restore:
  * passed as r0, r1, and r2 (a maximum of 3 arguments in addition to the
  * function pointer can be passed).  The function being called must be mapped
  * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c).  Return values are
- * passed in r0 and r1.
+ * passed in r0 (strictly 32bit).
  *
  * A function pointer with a value of 0xffffffff has a special meaning,
  * and is used to implement __hyp_get_vectors in the same way as in
@@ -246,279 +49,4 @@ after_vfp_restore:
 ENTRY(kvm_call_hyp)
 	hvc	#0
 	bx	lr
-
-/********************************************************************
- * Hypervisor exception vector and handlers
- *
- *
- * The KVM/ARM Hypervisor ABI is defined as follows:
- *
- * Entry to Hyp mode from the host kernel will happen _only_ when an HVC
- * instruction is issued since all traps are disabled when running the host
- * kernel as per the Hyp-mode initialization at boot time.
- *
- * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc
- * below) when the HVC instruction is called from SVC mode (i.e. a guest or the
- * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC
- * instructions are called from within Hyp-mode.
- *
- * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
- *    Switching to Hyp mode is done through a simple HVC #0 instruction. The
- *    exception vector code will check that the HVC comes from VMID==0 and if
- *    so will push the necessary state (SPSR, lr_usr) on the Hyp stack.
- *    - r0 contains a pointer to a HYP function
- *    - r1, r2, and r3 contain arguments to the above function.
- *    - The HYP function will be called with its arguments in r0, r1 and r2.
- *    On HYP function return, we return directly to SVC.
- *
- * Note that the above is used to execute code in Hyp-mode from a host-kernel
- * point of view, and is a different concept from performing a world-switch and
- * executing guest code SVC mode (with a VMID != 0).
- */
-
-/* Handle undef, svc, pabt, or dabt by crashing with a user notice */
-.macro bad_exception exception_code, panic_str
-	push	{r0-r2}
-	mrrc	p15, 6, r0, r1, c2	@ Read VTTBR
-	lsr	r1, r1, #16
-	ands	r1, r1, #0xff
-	beq	99f
-
-	load_vcpu			@ Load VCPU pointer
-	.if \exception_code == ARM_EXCEPTION_DATA_ABORT
-	mrc	p15, 4, r2, c5, c2, 0	@ HSR
-	mrc	p15, 4, r1, c6, c0, 0	@ HDFAR
-	str	r2, [vcpu, #VCPU_HSR]
-	str	r1, [vcpu, #VCPU_HxFAR]
-	.endif
-	.if \exception_code == ARM_EXCEPTION_PREF_ABORT
-	mrc	p15, 4, r2, c5, c2, 0	@ HSR
-	mrc	p15, 4, r1, c6, c0, 2	@ HIFAR
-	str	r2, [vcpu, #VCPU_HSR]
-	str	r1, [vcpu, #VCPU_HxFAR]
-	.endif
-	mov	r1, #\exception_code
-	b	__kvm_vcpu_return
-
-	@ We were in the host already. Let's craft a panic-ing return to SVC.
-99:	mrs	r2, cpsr
-	bic	r2, r2, #MODE_MASK
-	orr	r2, r2, #SVC_MODE
-THUMB(	orr	r2, r2, #PSR_T_BIT	)
-	msr	spsr_cxsf, r2
-	mrs	r1, ELR_hyp
-	ldr	r2, =panic
-	msr	ELR_hyp, r2
-	ldr	r0, =\panic_str
-	clrex				@ Clear exclusive monitor
-	eret
-.endm
-
-	.text
-
-	.align 5
-__kvm_hyp_vector:
-	.globl __kvm_hyp_vector
-
-	@ Hyp-mode exception vector
-	W(b)	hyp_reset
-	W(b)	hyp_undef
-	W(b)	hyp_svc
-	W(b)	hyp_pabt
-	W(b)	hyp_dabt
-	W(b)	hyp_hvc
-	W(b)	hyp_irq
-	W(b)	hyp_fiq
-
-	.align
-hyp_reset:
-	b	hyp_reset
-
-	.align
-hyp_undef:
-	bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str
-
-	.align
-hyp_svc:
-	bad_exception ARM_EXCEPTION_HVC, svc_die_str
-
-	.align
-hyp_pabt:
-	bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str
-
-	.align
-hyp_dabt:
-	bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str
-
-	.align
-hyp_hvc:
-	/*
-	 * Getting here is either becuase of a trap from a guest or from calling
-	 * HVC from the host kernel, which means "switch to Hyp mode".
-	 */
-	push	{r0, r1, r2}
-
-	@ Check syndrome register
-	mrc	p15, 4, r1, c5, c2, 0	@ HSR
-	lsr	r0, r1, #HSR_EC_SHIFT
-#ifdef CONFIG_VFPv3
-	cmp	r0, #HSR_EC_CP_0_13
-	beq	switch_to_guest_vfp
-#endif
-	cmp	r0, #HSR_EC_HVC
-	bne	guest_trap		@ Not HVC instr.
-
-	/*
-	 * Let's check if the HVC came from VMID 0 and allow simple
-	 * switch to Hyp mode
-	 */
-	mrrc    p15, 6, r0, r2, c2
-	lsr     r2, r2, #16
-	and     r2, r2, #0xff
-	cmp     r2, #0
-	bne	guest_trap		@ Guest called HVC
-
-host_switch_to_hyp:
-	pop	{r0, r1, r2}
-
-	/* Check for __hyp_get_vectors */
-	cmp	r0, #-1
-	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
-	beq	1f
-
-	push	{lr}
-	mrs	lr, SPSR
-	push	{lr}
-
-	mov	lr, r0
-	mov	r0, r1
-	mov	r1, r2
-	mov	r2, r3
-
-THUMB(	orr	lr, #1)
-	blx	lr			@ Call the HYP function
-
-	pop	{lr}
-	msr	SPSR_csxf, lr
-	pop	{lr}
-1:	eret
-
-guest_trap:
-	load_vcpu			@ Load VCPU pointer to r0
-	str	r1, [vcpu, #VCPU_HSR]
-
-	@ Check if we need the fault information
-	lsr	r1, r1, #HSR_EC_SHIFT
-	cmp	r1, #HSR_EC_IABT
-	mrceq	p15, 4, r2, c6, c0, 2	@ HIFAR
-	beq	2f
-	cmp	r1, #HSR_EC_DABT
-	bne	1f
-	mrc	p15, 4, r2, c6, c0, 0	@ HDFAR
-
-2:	str	r2, [vcpu, #VCPU_HxFAR]
-
-	/*
-	 * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode:
-	 *
-	 * Abort on the stage 2 translation for a memory access from a
-	 * Non-secure PL1 or PL0 mode:
-	 *
-	 * For any Access flag fault or Translation fault, and also for any
-	 * Permission fault on the stage 2 translation of a memory access
-	 * made as part of a translation table walk for a stage 1 translation,
-	 * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR
-	 * is UNKNOWN.
-	 */
-
-	/* Check for permission fault, and S1PTW */
-	mrc	p15, 4, r1, c5, c2, 0	@ HSR
-	and	r0, r1, #HSR_FSC_TYPE
-	cmp	r0, #FSC_PERM
-	tsteq	r1, #(1 << 7)		@ S1PTW
-	mrcne	p15, 4, r2, c6, c0, 4	@ HPFAR
-	bne	3f
-
-	/* Preserve PAR */
-	mrrc	p15, 0, r0, r1, c7	@ PAR
-	push	{r0, r1}
-
-	/* Resolve IPA using the xFAR */
-	mcr	p15, 0, r2, c7, c8, 0	@ ATS1CPR
-	isb
-	mrrc	p15, 0, r0, r1, c7	@ PAR
-	tst	r0, #1
-	bne	4f			@ Failed translation
-	ubfx	r2, r0, #12, #20
-	lsl	r2, r2, #4
-	orr	r2, r2, r1, lsl #24
-
-	/* Restore PAR */
-	pop	{r0, r1}
-	mcrr	p15, 0, r0, r1, c7	@ PAR
-
-3:	load_vcpu			@ Load VCPU pointer to r0
-	str	r2, [r0, #VCPU_HPFAR]
-
-1:	mov	r1, #ARM_EXCEPTION_HVC
-	b	__kvm_vcpu_return
-
-4:	pop	{r0, r1}		@ Failed translation, return to guest
-	mcrr	p15, 0, r0, r1, c7	@ PAR
-	clrex
-	pop	{r0, r1, r2}
-	eret
-
-/*
- * If VFPv3 support is not available, then we will not switch the VFP
- * registers; however cp10 and cp11 accesses will still trap and fallback
- * to the regular coprocessor emulation code, which currently will
- * inject an undefined exception to the guest.
- */
-#ifdef CONFIG_VFPv3
-switch_to_guest_vfp:
-	load_vcpu			@ Load VCPU pointer to r0
-	push	{r3-r7}
-
-	@ NEON/VFP used.  Turn on VFP access.
-	set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11))
-
-	@ Switch VFP/NEON hardware state to the guest's
-	add	r7, r0, #VCPU_VFP_HOST
-	ldr	r7, [r7]
-	store_vfp_state r7
-	add	r7, r0, #VCPU_VFP_GUEST
-	restore_vfp_state r7
-
-	pop	{r3-r7}
-	pop	{r0-r2}
-	clrex
-	eret
-#endif
-
-	.align
-hyp_irq:
-	push	{r0, r1, r2}
-	mov	r1, #ARM_EXCEPTION_IRQ
-	load_vcpu			@ Load VCPU pointer to r0
-	b	__kvm_vcpu_return
-
-	.align
-hyp_fiq:
-	b	hyp_fiq
-
-	.ltorg
-
-__kvm_hyp_code_end:
-	.globl	__kvm_hyp_code_end
-
-	.section ".rodata"
-
-und_die_str:
-	.ascii	"unexpected undefined exception in Hyp mode at: %#08x\n"
-pabt_die_str:
-	.ascii	"unexpected prefetch abort in Hyp mode at: %#08x\n"
-dabt_die_str:
-	.ascii	"unexpected data abort in Hyp mode at: %#08x\n"
-svc_die_str:
-	.ascii	"unexpected HVC/SVC trap in Hyp mode at: %#08x\n"
+ENDPROC(kvm_call_hyp)
diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
deleted file mode 100644
index 702740d37..000000000
--- a/arch/arm/kvm/interrupts_head.S
+++ /dev/null
@@ -1,646 +0,0 @@
-#include <linux/irqchip/arm-gic.h>
-#include <asm/assembler.h>
-
-#define VCPU_USR_REG(_reg_nr)	(VCPU_USR_REGS + (_reg_nr * 4))
-#define VCPU_USR_SP		(VCPU_USR_REG(13))
-#define VCPU_USR_LR		(VCPU_USR_REG(14))
-#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4))
-
-/*
- * Many of these macros need to access the VCPU structure, which is always
- * held in r0. These macros should never clobber r1, as it is used to hold the
- * exception code on the return path (except of course the macro that switches
- * all the registers before the final jump to the VM).
- */
-vcpu	.req	r0		@ vcpu pointer always in r0
-
-/* Clobbers {r2-r6} */
-.macro store_vfp_state vfp_base
-	@ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions
-	VFPFMRX	r2, FPEXC
-	@ Make sure VFP is enabled so we can touch the registers.
-	orr	r6, r2, #FPEXC_EN
-	VFPFMXR	FPEXC, r6
-
-	VFPFMRX	r3, FPSCR
-	tst	r2, #FPEXC_EX		@ Check for VFP Subarchitecture
-	beq	1f
-	@ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so
-	@ we only need to save them if FPEXC_EX is set.
-	VFPFMRX r4, FPINST
-	tst	r2, #FPEXC_FP2V
-	VFPFMRX r5, FPINST2, ne		@ vmrsne
-	bic	r6, r2, #FPEXC_EX	@ FPEXC_EX disable
-	VFPFMXR	FPEXC, r6
-1:
-	VFPFSTMIA \vfp_base, r6		@ Save VFP registers
-	stm	\vfp_base, {r2-r5}	@ Save FPEXC, FPSCR, FPINST, FPINST2
-.endm
-
-/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */
-.macro restore_vfp_state vfp_base
-	VFPFLDMIA \vfp_base, r6		@ Load VFP registers
-	ldm	\vfp_base, {r2-r5}	@ Load FPEXC, FPSCR, FPINST, FPINST2
-
-	VFPFMXR FPSCR, r3
-	tst	r2, #FPEXC_EX		@ Check for VFP Subarchitecture
-	beq	1f
-	VFPFMXR FPINST, r4
-	tst	r2, #FPEXC_FP2V
-	VFPFMXR FPINST2, r5, ne
-1:
-	VFPFMXR FPEXC, r2	@ FPEXC	(last, in case !EN)
-.endm
-
-/* These are simply for the macros to work - value don't have meaning */
-.equ usr, 0
-.equ svc, 1
-.equ abt, 2
-.equ und, 3
-.equ irq, 4
-.equ fiq, 5
-
-.macro push_host_regs_mode mode
-	mrs	r2, SP_\mode
-	mrs	r3, LR_\mode
-	mrs	r4, SPSR_\mode
-	push	{r2, r3, r4}
-.endm
-
-/*
- * Store all host persistent registers on the stack.
- * Clobbers all registers, in all modes, except r0 and r1.
- */
-.macro save_host_regs
-	/* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */
-	mrs	r2, ELR_hyp
-	push	{r2}
-
-	/* usr regs */
-	push	{r4-r12}	@ r0-r3 are always clobbered
-	mrs	r2, SP_usr
-	mov	r3, lr
-	push	{r2, r3}
-
-	push_host_regs_mode svc
-	push_host_regs_mode abt
-	push_host_regs_mode und
-	push_host_regs_mode irq
-
-	/* fiq regs */
-	mrs	r2, r8_fiq
-	mrs	r3, r9_fiq
-	mrs	r4, r10_fiq
-	mrs	r5, r11_fiq
-	mrs	r6, r12_fiq
-	mrs	r7, SP_fiq
-	mrs	r8, LR_fiq
-	mrs	r9, SPSR_fiq
-	push	{r2-r9}
-.endm
-
-.macro pop_host_regs_mode mode
-	pop	{r2, r3, r4}
-	msr	SP_\mode, r2
-	msr	LR_\mode, r3
-	msr	SPSR_\mode, r4
-.endm
-
-/*
- * Restore all host registers from the stack.
- * Clobbers all registers, in all modes, except r0 and r1.
- */
-.macro restore_host_regs
-	pop	{r2-r9}
-	msr	r8_fiq, r2
-	msr	r9_fiq, r3
-	msr	r10_fiq, r4
-	msr	r11_fiq, r5
-	msr	r12_fiq, r6
-	msr	SP_fiq, r7
-	msr	LR_fiq, r8
-	msr	SPSR_fiq, r9
-
-	pop_host_regs_mode irq
-	pop_host_regs_mode und
-	pop_host_regs_mode abt
-	pop_host_regs_mode svc
-
-	pop	{r2, r3}
-	msr	SP_usr, r2
-	mov	lr, r3
-	pop	{r4-r12}
-
-	pop	{r2}
-	msr	ELR_hyp, r2
-.endm
-
-/*
- * Restore SP, LR and SPSR for a given mode. offset is the offset of
- * this mode's registers from the VCPU base.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r1, r2, r3, r4.
- */
-.macro restore_guest_regs_mode mode, offset
-	add	r1, vcpu, \offset
-	ldm	r1, {r2, r3, r4}
-	msr	SP_\mode, r2
-	msr	LR_\mode, r3
-	msr	SPSR_\mode, r4
-.endm
-
-/*
- * Restore all guest registers from the vcpu struct.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers *all* registers.
- */
-.macro restore_guest_regs
-	restore_guest_regs_mode svc, #VCPU_SVC_REGS
-	restore_guest_regs_mode abt, #VCPU_ABT_REGS
-	restore_guest_regs_mode und, #VCPU_UND_REGS
-	restore_guest_regs_mode irq, #VCPU_IRQ_REGS
-
-	add	r1, vcpu, #VCPU_FIQ_REGS
-	ldm	r1, {r2-r9}
-	msr	r8_fiq, r2
-	msr	r9_fiq, r3
-	msr	r10_fiq, r4
-	msr	r11_fiq, r5
-	msr	r12_fiq, r6
-	msr	SP_fiq, r7
-	msr	LR_fiq, r8
-	msr	SPSR_fiq, r9
-
-	@ Load return state
-	ldr	r2, [vcpu, #VCPU_PC]
-	ldr	r3, [vcpu, #VCPU_CPSR]
-	msr	ELR_hyp, r2
-	msr	SPSR_cxsf, r3
-
-	@ Load user registers
-	ldr	r2, [vcpu, #VCPU_USR_SP]
-	ldr	r3, [vcpu, #VCPU_USR_LR]
-	msr	SP_usr, r2
-	mov	lr, r3
-	add	vcpu, vcpu, #(VCPU_USR_REGS)
-	ldm	vcpu, {r0-r12}
-.endm
-
-/*
- * Save SP, LR and SPSR for a given mode. offset is the offset of
- * this mode's registers from the VCPU base.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r2, r3, r4, r5.
- */
-.macro save_guest_regs_mode mode, offset
-	add	r2, vcpu, \offset
-	mrs	r3, SP_\mode
-	mrs	r4, LR_\mode
-	mrs	r5, SPSR_\mode
-	stm	r2, {r3, r4, r5}
-.endm
-
-/*
- * Save all guest registers to the vcpu struct
- * Expects guest's r0, r1, r2 on the stack.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r2, r3, r4, r5.
- */
-.macro save_guest_regs
-	@ Store usr registers
-	add	r2, vcpu, #VCPU_USR_REG(3)
-	stm	r2, {r3-r12}
-	add	r2, vcpu, #VCPU_USR_REG(0)
-	pop	{r3, r4, r5}		@ r0, r1, r2
-	stm	r2, {r3, r4, r5}
-	mrs	r2, SP_usr
-	mov	r3, lr
-	str	r2, [vcpu, #VCPU_USR_SP]
-	str	r3, [vcpu, #VCPU_USR_LR]
-
-	@ Store return state
-	mrs	r2, ELR_hyp
-	mrs	r3, spsr
-	str	r2, [vcpu, #VCPU_PC]
-	str	r3, [vcpu, #VCPU_CPSR]
-
-	@ Store other guest registers
-	save_guest_regs_mode svc, #VCPU_SVC_REGS
-	save_guest_regs_mode abt, #VCPU_ABT_REGS
-	save_guest_regs_mode und, #VCPU_UND_REGS
-	save_guest_regs_mode irq, #VCPU_IRQ_REGS
-.endm
-
-/* Reads cp15 registers from hardware and stores them in memory
- * @store_to_vcpu: If 0, registers are written in-order to the stack,
- * 		   otherwise to the VCPU struct pointed to by vcpup
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r2 - r12
- */
-.macro read_cp15_state store_to_vcpu
-	mrc	p15, 0, r2, c1, c0, 0	@ SCTLR
-	mrc	p15, 0, r3, c1, c0, 2	@ CPACR
-	mrc	p15, 0, r4, c2, c0, 2	@ TTBCR
-	mrc	p15, 0, r5, c3, c0, 0	@ DACR
-	mrrc	p15, 0, r6, r7, c2	@ TTBR 0
-	mrrc	p15, 1, r8, r9, c2	@ TTBR 1
-	mrc	p15, 0, r10, c10, c2, 0	@ PRRR
-	mrc	p15, 0, r11, c10, c2, 1	@ NMRR
-	mrc	p15, 2, r12, c0, c0, 0	@ CSSELR
-
-	.if \store_to_vcpu == 0
-	push	{r2-r12}		@ Push CP15 registers
-	.else
-	str	r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
-	str	r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
-	str	r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
-	str	r5, [vcpu, #CP15_OFFSET(c3_DACR)]
-	add	r2, vcpu, #CP15_OFFSET(c2_TTBR0)
-	strd	r6, r7, [r2]
-	add	r2, vcpu, #CP15_OFFSET(c2_TTBR1)
-	strd	r8, r9, [r2]
-	str	r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
-	str	r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
-	str	r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
-	.endif
-
-	mrc	p15, 0, r2, c13, c0, 1	@ CID
-	mrc	p15, 0, r3, c13, c0, 2	@ TID_URW
-	mrc	p15, 0, r4, c13, c0, 3	@ TID_URO
-	mrc	p15, 0, r5, c13, c0, 4	@ TID_PRIV
-	mrc	p15, 0, r6, c5, c0, 0	@ DFSR
-	mrc	p15, 0, r7, c5, c0, 1	@ IFSR
-	mrc	p15, 0, r8, c5, c1, 0	@ ADFSR
-	mrc	p15, 0, r9, c5, c1, 1	@ AIFSR
-	mrc	p15, 0, r10, c6, c0, 0	@ DFAR
-	mrc	p15, 0, r11, c6, c0, 2	@ IFAR
-	mrc	p15, 0, r12, c12, c0, 0	@ VBAR
-
-	.if \store_to_vcpu == 0
-	push	{r2-r12}		@ Push CP15 registers
-	.else
-	str	r2, [vcpu, #CP15_OFFSET(c13_CID)]
-	str	r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
-	str	r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
-	str	r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
-	str	r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
-	str	r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
-	str	r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
-	str	r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
-	str	r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
-	str	r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
-	str	r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
-	.endif
-
-	mrc	p15, 0, r2, c14, c1, 0	@ CNTKCTL
-	mrrc	p15, 0, r4, r5, c7	@ PAR
-	mrc	p15, 0, r6, c10, c3, 0	@ AMAIR0
-	mrc	p15, 0, r7, c10, c3, 1	@ AMAIR1
-
-	.if \store_to_vcpu == 0
-	push	{r2,r4-r7}
-	.else
-	str	r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
-	add	r12, vcpu, #CP15_OFFSET(c7_PAR)
-	strd	r4, r5, [r12]
-	str	r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
-	str	r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
-	.endif
-.endm
-
-/*
- * Reads cp15 registers from memory and writes them to hardware
- * @read_from_vcpu: If 0, registers are read in-order from the stack,
- *		    otherwise from the VCPU struct pointed to by vcpup
- *
- * Assumes vcpu pointer in vcpu reg
- */
-.macro write_cp15_state read_from_vcpu
-	.if \read_from_vcpu == 0
-	pop	{r2,r4-r7}
-	.else
-	ldr	r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
-	add	r12, vcpu, #CP15_OFFSET(c7_PAR)
-	ldrd	r4, r5, [r12]
-	ldr	r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
-	ldr	r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
-	.endif
-
-	mcr	p15, 0, r2, c14, c1, 0	@ CNTKCTL
-	mcrr	p15, 0, r4, r5, c7	@ PAR
-	mcr	p15, 0, r6, c10, c3, 0	@ AMAIR0
-	mcr	p15, 0, r7, c10, c3, 1	@ AMAIR1
-
-	.if \read_from_vcpu == 0
-	pop	{r2-r12}
-	.else
-	ldr	r2, [vcpu, #CP15_OFFSET(c13_CID)]
-	ldr	r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
-	ldr	r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
-	ldr	r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
-	ldr	r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
-	ldr	r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
-	ldr	r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
-	ldr	r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
-	ldr	r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
-	ldr	r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
-	ldr	r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
-	.endif
-
-	mcr	p15, 0, r2, c13, c0, 1	@ CID
-	mcr	p15, 0, r3, c13, c0, 2	@ TID_URW
-	mcr	p15, 0, r4, c13, c0, 3	@ TID_URO
-	mcr	p15, 0, r5, c13, c0, 4	@ TID_PRIV
-	mcr	p15, 0, r6, c5, c0, 0	@ DFSR
-	mcr	p15, 0, r7, c5, c0, 1	@ IFSR
-	mcr	p15, 0, r8, c5, c1, 0	@ ADFSR
-	mcr	p15, 0, r9, c5, c1, 1	@ AIFSR
-	mcr	p15, 0, r10, c6, c0, 0	@ DFAR
-	mcr	p15, 0, r11, c6, c0, 2	@ IFAR
-	mcr	p15, 0, r12, c12, c0, 0	@ VBAR
-
-	.if \read_from_vcpu == 0
-	pop	{r2-r12}
-	.else
-	ldr	r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
-	ldr	r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
-	ldr	r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
-	ldr	r5, [vcpu, #CP15_OFFSET(c3_DACR)]
-	add	r12, vcpu, #CP15_OFFSET(c2_TTBR0)
-	ldrd	r6, r7, [r12]
-	add	r12, vcpu, #CP15_OFFSET(c2_TTBR1)
-	ldrd	r8, r9, [r12]
-	ldr	r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
-	ldr	r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
-	ldr	r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
-	.endif
-
-	mcr	p15, 0, r2, c1, c0, 0	@ SCTLR
-	mcr	p15, 0, r3, c1, c0, 2	@ CPACR
-	mcr	p15, 0, r4, c2, c0, 2	@ TTBCR
-	mcr	p15, 0, r5, c3, c0, 0	@ DACR
-	mcrr	p15, 0, r6, r7, c2	@ TTBR 0
-	mcrr	p15, 1, r8, r9, c2	@ TTBR 1
-	mcr	p15, 0, r10, c10, c2, 0	@ PRRR
-	mcr	p15, 0, r11, c10, c2, 1	@ NMRR
-	mcr	p15, 2, r12, c0, c0, 0	@ CSSELR
-.endm
-
-/*
- * Save the VGIC CPU state into memory
- *
- * Assumes vcpu pointer in vcpu reg
- */
-.macro save_vgic_state
-	/* Get VGIC VCTRL base into r2 */
-	ldr	r2, [vcpu, #VCPU_KVM]
-	ldr	r2, [r2, #KVM_VGIC_VCTRL]
-	cmp	r2, #0
-	beq	2f
-
-	/* Compute the address of struct vgic_cpu */
-	add	r11, vcpu, #VCPU_VGIC_CPU
-
-	/* Save all interesting registers */
-	ldr	r4, [r2, #GICH_VMCR]
-	ldr	r5, [r2, #GICH_MISR]
-	ldr	r6, [r2, #GICH_EISR0]
-	ldr	r7, [r2, #GICH_EISR1]
-	ldr	r8, [r2, #GICH_ELRSR0]
-	ldr	r9, [r2, #GICH_ELRSR1]
-	ldr	r10, [r2, #GICH_APR]
-ARM_BE8(rev	r4, r4	)
-ARM_BE8(rev	r5, r5	)
-ARM_BE8(rev	r6, r6	)
-ARM_BE8(rev	r7, r7	)
-ARM_BE8(rev	r8, r8	)
-ARM_BE8(rev	r9, r9	)
-ARM_BE8(rev	r10, r10	)
-
-	str	r4, [r11, #VGIC_V2_CPU_VMCR]
-	str	r5, [r11, #VGIC_V2_CPU_MISR]
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	str	r6, [r11, #(VGIC_V2_CPU_EISR + 4)]
-	str	r7, [r11, #VGIC_V2_CPU_EISR]
-	str	r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)]
-	str	r9, [r11, #VGIC_V2_CPU_ELRSR]
-#else
-	str	r6, [r11, #VGIC_V2_CPU_EISR]
-	str	r7, [r11, #(VGIC_V2_CPU_EISR + 4)]
-	str	r8, [r11, #VGIC_V2_CPU_ELRSR]
-	str	r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)]
-#endif
-	str	r10, [r11, #VGIC_V2_CPU_APR]
-
-	/* Clear GICH_HCR */
-	mov	r5, #0
-	str	r5, [r2, #GICH_HCR]
-
-	/* Save list registers */
-	add	r2, r2, #GICH_LR0
-	add	r3, r11, #VGIC_V2_CPU_LR
-	ldr	r4, [r11, #VGIC_CPU_NR_LR]
-1:	ldr	r6, [r2], #4
-ARM_BE8(rev	r6, r6	)
-	str	r6, [r3], #4
-	subs	r4, r4, #1
-	bne	1b
-2:
-.endm
-
-/*
- * Restore the VGIC CPU state from memory
- *
- * Assumes vcpu pointer in vcpu reg
- */
-.macro restore_vgic_state
-	/* Get VGIC VCTRL base into r2 */
-	ldr	r2, [vcpu, #VCPU_KVM]
-	ldr	r2, [r2, #KVM_VGIC_VCTRL]
-	cmp	r2, #0
-	beq	2f
-
-	/* Compute the address of struct vgic_cpu */
-	add	r11, vcpu, #VCPU_VGIC_CPU
-
-	/* We only restore a minimal set of registers */
-	ldr	r3, [r11, #VGIC_V2_CPU_HCR]
-	ldr	r4, [r11, #VGIC_V2_CPU_VMCR]
-	ldr	r8, [r11, #VGIC_V2_CPU_APR]
-ARM_BE8(rev	r3, r3	)
-ARM_BE8(rev	r4, r4	)
-ARM_BE8(rev	r8, r8	)
-
-	str	r3, [r2, #GICH_HCR]
-	str	r4, [r2, #GICH_VMCR]
-	str	r8, [r2, #GICH_APR]
-
-	/* Restore list registers */
-	add	r2, r2, #GICH_LR0
-	add	r3, r11, #VGIC_V2_CPU_LR
-	ldr	r4, [r11, #VGIC_CPU_NR_LR]
-1:	ldr	r6, [r3], #4
-ARM_BE8(rev	r6, r6  )
-	str	r6, [r2], #4
-	subs	r4, r4, #1
-	bne	1b
-2:
-.endm
-
-#define CNTHCTL_PL1PCTEN	(1 << 0)
-#define CNTHCTL_PL1PCEN		(1 << 1)
-
-/*
- * Save the timer state onto the VCPU and allow physical timer/counter access
- * for the host.
- *
- * Assumes vcpu pointer in vcpu reg
- * Clobbers r2-r5
- */
-.macro save_timer_state
-	ldr	r4, [vcpu, #VCPU_KVM]
-	ldr	r2, [r4, #KVM_TIMER_ENABLED]
-	cmp	r2, #0
-	beq	1f
-
-	mrc	p15, 0, r2, c14, c3, 1	@ CNTV_CTL
-	str	r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
-	bic	r2, #1			@ Clear ENABLE
-	mcr	p15, 0, r2, c14, c3, 1	@ CNTV_CTL
-	isb
-
-	mrrc	p15, 3, rr_lo_hi(r2, r3), c14	@ CNTV_CVAL
-	ldr	r4, =VCPU_TIMER_CNTV_CVAL
-	add	r5, vcpu, r4
-	strd	r2, r3, [r5]
-
-	@ Ensure host CNTVCT == CNTPCT
-	mov	r2, #0
-	mcrr	p15, 4, r2, r2, c14	@ CNTVOFF
-
-1:
-	@ Allow physical timer/counter access for the host
-	mrc	p15, 4, r2, c14, c1, 0	@ CNTHCTL
-	orr	r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN)
-	mcr	p15, 4, r2, c14, c1, 0	@ CNTHCTL
-.endm
-
-/*
- * Load the timer state from the VCPU and deny physical timer/counter access
- * for the host.
- *
- * Assumes vcpu pointer in vcpu reg
- * Clobbers r2-r5
- */
-.macro restore_timer_state
-	@ Disallow physical timer access for the guest
-	@ Physical counter access is allowed
-	mrc	p15, 4, r2, c14, c1, 0	@ CNTHCTL
-	orr	r2, r2, #CNTHCTL_PL1PCTEN
-	bic	r2, r2, #CNTHCTL_PL1PCEN
-	mcr	p15, 4, r2, c14, c1, 0	@ CNTHCTL
-
-	ldr	r4, [vcpu, #VCPU_KVM]
-	ldr	r2, [r4, #KVM_TIMER_ENABLED]
-	cmp	r2, #0
-	beq	1f
-
-	ldr	r2, [r4, #KVM_TIMER_CNTVOFF]
-	ldr	r3, [r4, #(KVM_TIMER_CNTVOFF + 4)]
-	mcrr	p15, 4, rr_lo_hi(r2, r3), c14	@ CNTVOFF
-
-	ldr	r4, =VCPU_TIMER_CNTV_CVAL
-	add	r5, vcpu, r4
-	ldrd	r2, r3, [r5]
-	mcrr	p15, 3, rr_lo_hi(r2, r3), c14	@ CNTV_CVAL
-	isb
-
-	ldr	r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
-	and	r2, r2, #3
-	mcr	p15, 0, r2, c14, c3, 1	@ CNTV_CTL
-1:
-.endm
-
-.equ vmentry,	0
-.equ vmexit,	1
-
-/* Configures the HSTR (Hyp System Trap Register) on entry/return
- * (hardware reset value is 0) */
-.macro set_hstr operation
-	mrc	p15, 4, r2, c1, c1, 3
-	ldr	r3, =HSTR_T(15)
-	.if \operation == vmentry
-	orr	r2, r2, r3		@ Trap CR{15}
-	.else
-	bic	r2, r2, r3		@ Don't trap any CRx accesses
-	.endif
-	mcr	p15, 4, r2, c1, c1, 3
-.endm
-
-/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return
- * (hardware reset value is 0). Keep previous value in r2.
- * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if
- * VFP wasn't already enabled (always executed on vmtrap).
- * If a label is specified with vmexit, it is branched to if VFP wasn't
- * enabled.
- */
-.macro set_hcptr operation, mask, label = none
-	mrc	p15, 4, r2, c1, c1, 2
-	ldr	r3, =\mask
-	.if \operation == vmentry
-	orr	r3, r2, r3		@ Trap coproc-accesses defined in mask
-	.else
-	bic	r3, r2, r3		@ Don't trap defined coproc-accesses
-	.endif
-	mcr	p15, 4, r3, c1, c1, 2
-	.if \operation != vmentry
-	.if \operation == vmexit
-	tst	r2, #(HCPTR_TCP(10) | HCPTR_TCP(11))
-	beq	1f
-	.endif
-	isb
-	.if \label != none
-	b	\label
-	.endif
-1:
-	.endif
-.endm
-
-/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return
- * (hardware reset value is 0) */
-.macro set_hdcr operation
-	mrc	p15, 4, r2, c1, c1, 1
-	ldr	r3, =(HDCR_TPM|HDCR_TPMCR)
-	.if \operation == vmentry
-	orr	r2, r2, r3		@ Trap some perfmon accesses
-	.else
-	bic	r2, r2, r3		@ Don't trap any perfmon accesses
-	.endif
-	mcr	p15, 4, r2, c1, c1, 1
-.endm
-
-/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */
-.macro configure_hyp_role operation
-	.if \operation == vmentry
-	ldr	r2, [vcpu, #VCPU_HCR]
-	ldr	r3, [vcpu, #VCPU_IRQ_LINES]
-	orr	r2, r2, r3
-	.else
-	mov	r2, #0
-	.endif
-	mcr	p15, 4, r2, c1, c1, 0	@ HCR
-.endm
-
-.macro load_vcpu
-	mrc	p15, 4, vcpu, c13, c0, 2	@ HTPIDR
-.endm
diff --git a/arch/arm/kvm/irq.h b/arch/arm/kvm/irq.h
new file mode 100644
index 000000000..b74099b90
--- /dev/null
+++ b/arch/arm/kvm/irq.h
@@ -0,0 +1,19 @@
+/*
+ * irq.h: in kernel interrupt controller related definitions
+ * Copyright (c) 2016 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This header is included by irqchip.c. However, on ARM, interrupt
+ * controller declarations are located in include/kvm/arm_vgic.h since
+ * they are mostly shared between arm and arm64.
+ */
+
+#ifndef __IRQ_H
+#define __IRQ_H
+
+#include <kvm/arm_vgic.h>
+
+#endif
diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c
index 974b1c606..10f80a6c7 100644
--- a/arch/arm/kvm/mmio.c
+++ b/arch/arm/kvm/mmio.c
@@ -23,7 +23,7 @@
 
 #include "trace.h"
 
-static void mmio_write_buf(char *buf, unsigned int len, unsigned long data)
+void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data)
 {
 	void *datap = NULL;
 	union {
@@ -55,7 +55,7 @@ static void mmio_write_buf(char *buf, unsigned int len, unsigned long data)
 	memcpy(buf, datap, len);
 }
 
-static unsigned long mmio_read_buf(char *buf, unsigned int len)
+unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len)
 {
 	unsigned long data = 0;
 	union {
@@ -66,7 +66,7 @@ static unsigned long mmio_read_buf(char *buf, unsigned int len)
 
 	switch (len) {
 	case 1:
-		data = buf[0];
+		data = *(u8 *)buf;
 		break;
 	case 2:
 		memcpy(&tmp.hword, buf, len);
@@ -87,11 +87,10 @@ static unsigned long mmio_read_buf(char *buf, unsigned int len)
 
 /**
  * kvm_handle_mmio_return -- Handle MMIO loads after user space emulation
+ *			     or in-kernel IO emulation
+ *
  * @vcpu: The VCPU pointer
  * @run:  The VCPU run struct containing the mmio data
- *
- * This should only be called after returning from userspace for MMIO load
- * emulation.
  */
 int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
@@ -104,7 +103,7 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		if (len > sizeof(unsigned long))
 			return -EINVAL;
 
-		data = mmio_read_buf(run->mmio.data, len);
+		data = kvm_mmio_read_buf(run->mmio.data, len);
 
 		if (vcpu->arch.mmio_decode.sign_extend &&
 		    len < sizeof(unsigned long)) {
@@ -115,7 +114,7 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr,
 			       data);
 		data = vcpu_data_host_to_guest(vcpu, data, len);
-		*vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt) = data;
+		vcpu_set_reg(vcpu, vcpu->arch.mmio_decode.rt, data);
 	}
 
 	return 0;
@@ -186,10 +185,11 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
 	rt = vcpu->arch.mmio_decode.rt;
 
 	if (is_write) {
-		data = vcpu_data_guest_to_host(vcpu, *vcpu_reg(vcpu, rt), len);
+		data = vcpu_data_guest_to_host(vcpu, vcpu_get_reg(vcpu, rt),
+					       len);
 
 		trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, len, fault_ipa, data);
-		mmio_write_buf(data_buf, len, data);
+		kvm_mmio_write_buf(data_buf, len, data);
 
 		ret = kvm_io_bus_write(vcpu, KVM_MMIO_BUS, fault_ipa, len,
 				       data_buf);
@@ -205,14 +205,19 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
 	run->mmio.is_write	= is_write;
 	run->mmio.phys_addr	= fault_ipa;
 	run->mmio.len		= len;
-	memcpy(run->mmio.data, data_buf, len);
 
 	if (!ret) {
 		/* We handled the access successfully in the kernel. */
+		if (!is_write)
+			memcpy(run->mmio.data, data_buf, len);
+		vcpu->stat.mmio_exit_kernel++;
 		kvm_handle_mmio_return(vcpu, run);
 		return 1;
 	}
 
+	if (is_write)
+		memcpy(run->mmio.data, data_buf, len);
+	vcpu->stat.mmio_exit_user++;
 	run->exit_reason	= KVM_EXIT_MMIO;
 	return 0;
 }
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 7b4201294..e9a5c0e0c 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -28,11 +28,10 @@
 #include <asm/kvm_mmio.h>
 #include <asm/kvm_asm.h>
 #include <asm/kvm_emulate.h>
+#include <asm/virt.h>
 
 #include "trace.h"
 
-extern char  __hyp_idmap_text_start[], __hyp_idmap_text_end[];
-
 static pgd_t *boot_hyp_pgd;
 static pgd_t *hyp_pgd;
 static pgd_t *merged_hyp_pgd;
@@ -42,11 +41,9 @@ static unsigned long hyp_idmap_start;
 static unsigned long hyp_idmap_end;
 static phys_addr_t hyp_idmap_vector;
 
+#define S2_PGD_SIZE	(PTRS_PER_S2_PGD * sizeof(pgd_t))
 #define hyp_pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t))
 
-#define kvm_pmd_huge(_x)	(pmd_huge(_x) || pmd_trans_huge(_x))
-#define kvm_pud_huge(_x)	pud_huge(_x)
-
 #define KVM_S2PTE_FLAG_IS_IOMAP		(1UL << 0)
 #define KVM_S2_FLAG_LOGGING_ACTIVE	(1UL << 1)
 
@@ -68,14 +65,7 @@ void kvm_flush_remote_tlbs(struct kvm *kvm)
 
 static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 {
-	/*
-	 * This function also gets called when dealing with HYP page
-	 * tables. As HYP doesn't have an associated struct kvm (and
-	 * the HYP page tables are fairly static), we don't do
-	 * anything there.
-	 */
-	if (kvm)
-		kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
+	kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
 }
 
 /*
@@ -98,6 +88,11 @@ static void kvm_flush_dcache_pud(pud_t pud)
 	__kvm_flush_dcache_pud(pud);
 }
 
+static bool kvm_is_device_pfn(unsigned long pfn)
+{
+	return !pfn_valid(pfn);
+}
+
 /**
  * stage2_dissolve_pmd() - clear and flush huge PMD entry
  * @kvm:	pointer to kvm structure.
@@ -109,7 +104,7 @@ static void kvm_flush_dcache_pud(pud_t pud)
  */
 static void stage2_dissolve_pmd(struct kvm *kvm, phys_addr_t addr, pmd_t *pmd)
 {
-	if (!kvm_pmd_huge(*pmd))
+	if (!pmd_thp_or_huge(*pmd))
 		return;
 
 	pmd_clear(pmd);
@@ -149,29 +144,29 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc)
 	return p;
 }
 
-static void clear_pgd_entry(struct kvm *kvm, pgd_t *pgd, phys_addr_t addr)
+static void clear_stage2_pgd_entry(struct kvm *kvm, pgd_t *pgd, phys_addr_t addr)
 {
-	pud_t *pud_table __maybe_unused = pud_offset(pgd, 0);
-	pgd_clear(pgd);
+	pud_t *pud_table __maybe_unused = stage2_pud_offset(pgd, 0UL);
+	stage2_pgd_clear(pgd);
 	kvm_tlb_flush_vmid_ipa(kvm, addr);
-	pud_free(NULL, pud_table);
+	stage2_pud_free(pud_table);
 	put_page(virt_to_page(pgd));
 }
 
-static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr)
+static void clear_stage2_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr)
 {
-	pmd_t *pmd_table = pmd_offset(pud, 0);
-	VM_BUG_ON(pud_huge(*pud));
-	pud_clear(pud);
+	pmd_t *pmd_table __maybe_unused = stage2_pmd_offset(pud, 0);
+	VM_BUG_ON(stage2_pud_huge(*pud));
+	stage2_pud_clear(pud);
 	kvm_tlb_flush_vmid_ipa(kvm, addr);
-	pmd_free(NULL, pmd_table);
+	stage2_pmd_free(pmd_table);
 	put_page(virt_to_page(pud));
 }
 
-static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
+static void clear_stage2_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
 {
 	pte_t *pte_table = pte_offset_kernel(pmd, 0);
-	VM_BUG_ON(kvm_pmd_huge(*pmd));
+	VM_BUG_ON(pmd_thp_or_huge(*pmd));
 	pmd_clear(pmd);
 	kvm_tlb_flush_vmid_ipa(kvm, addr);
 	pte_free_kernel(NULL, pte_table);
@@ -198,7 +193,7 @@ static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
  * the corresponding TLBs, we call kvm_flush_dcache_p*() to make sure
  * the IO subsystem will never hit in the cache.
  */
-static void unmap_ptes(struct kvm *kvm, pmd_t *pmd,
+static void unmap_stage2_ptes(struct kvm *kvm, pmd_t *pmd,
 		       phys_addr_t addr, phys_addr_t end)
 {
 	phys_addr_t start_addr = addr;
@@ -213,28 +208,28 @@ static void unmap_ptes(struct kvm *kvm, pmd_t *pmd,
 			kvm_tlb_flush_vmid_ipa(kvm, addr);
 
 			/* No need to invalidate the cache for device mappings */
-			if ((pte_val(old_pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+			if (!kvm_is_device_pfn(pte_pfn(old_pte)))
 				kvm_flush_dcache_pte(old_pte);
 
 			put_page(virt_to_page(pte));
 		}
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 
-	if (kvm_pte_table_empty(kvm, start_pte))
-		clear_pmd_entry(kvm, pmd, start_addr);
+	if (stage2_pte_table_empty(start_pte))
+		clear_stage2_pmd_entry(kvm, pmd, start_addr);
 }
 
-static void unmap_pmds(struct kvm *kvm, pud_t *pud,
+static void unmap_stage2_pmds(struct kvm *kvm, pud_t *pud,
 		       phys_addr_t addr, phys_addr_t end)
 {
 	phys_addr_t next, start_addr = addr;
 	pmd_t *pmd, *start_pmd;
 
-	start_pmd = pmd = pmd_offset(pud, addr);
+	start_pmd = pmd = stage2_pmd_offset(pud, addr);
 	do {
-		next = kvm_pmd_addr_end(addr, end);
+		next = stage2_pmd_addr_end(addr, end);
 		if (!pmd_none(*pmd)) {
-			if (kvm_pmd_huge(*pmd)) {
+			if (pmd_thp_or_huge(*pmd)) {
 				pmd_t old_pmd = *pmd;
 
 				pmd_clear(pmd);
@@ -244,57 +239,64 @@ static void unmap_pmds(struct kvm *kvm, pud_t *pud,
 
 				put_page(virt_to_page(pmd));
 			} else {
-				unmap_ptes(kvm, pmd, addr, next);
+				unmap_stage2_ptes(kvm, pmd, addr, next);
 			}
 		}
 	} while (pmd++, addr = next, addr != end);
 
-	if (kvm_pmd_table_empty(kvm, start_pmd))
-		clear_pud_entry(kvm, pud, start_addr);
+	if (stage2_pmd_table_empty(start_pmd))
+		clear_stage2_pud_entry(kvm, pud, start_addr);
 }
 
-static void unmap_puds(struct kvm *kvm, pgd_t *pgd,
+static void unmap_stage2_puds(struct kvm *kvm, pgd_t *pgd,
 		       phys_addr_t addr, phys_addr_t end)
 {
 	phys_addr_t next, start_addr = addr;
 	pud_t *pud, *start_pud;
 
-	start_pud = pud = pud_offset(pgd, addr);
+	start_pud = pud = stage2_pud_offset(pgd, addr);
 	do {
-		next = kvm_pud_addr_end(addr, end);
-		if (!pud_none(*pud)) {
-			if (pud_huge(*pud)) {
+		next = stage2_pud_addr_end(addr, end);
+		if (!stage2_pud_none(*pud)) {
+			if (stage2_pud_huge(*pud)) {
 				pud_t old_pud = *pud;
 
-				pud_clear(pud);
+				stage2_pud_clear(pud);
 				kvm_tlb_flush_vmid_ipa(kvm, addr);
-
 				kvm_flush_dcache_pud(old_pud);
-
 				put_page(virt_to_page(pud));
 			} else {
-				unmap_pmds(kvm, pud, addr, next);
+				unmap_stage2_pmds(kvm, pud, addr, next);
 			}
 		}
 	} while (pud++, addr = next, addr != end);
 
-	if (kvm_pud_table_empty(kvm, start_pud))
-		clear_pgd_entry(kvm, pgd, start_addr);
+	if (stage2_pud_table_empty(start_pud))
+		clear_stage2_pgd_entry(kvm, pgd, start_addr);
 }
 
-
-static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
-			phys_addr_t start, u64 size)
+/**
+ * unmap_stage2_range -- Clear stage2 page table entries to unmap a range
+ * @kvm:   The VM pointer
+ * @start: The intermediate physical base address of the range to unmap
+ * @size:  The size of the area to unmap
+ *
+ * Clear a range of stage-2 mappings, lowering the various ref-counts.  Must
+ * be called while holding mmu_lock (unless for freeing the stage2 pgd before
+ * destroying the VM), otherwise another faulting VCPU may come in and mess
+ * with things behind our backs.
+ */
+static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
 {
 	pgd_t *pgd;
 	phys_addr_t addr = start, end = start + size;
 	phys_addr_t next;
 
-	pgd = pgdp + kvm_pgd_index(addr);
+	pgd = kvm->arch.pgd + stage2_pgd_index(addr);
 	do {
-		next = kvm_pgd_addr_end(addr, end);
-		if (!pgd_none(*pgd))
-			unmap_puds(kvm, pgd, addr, next);
+		next = stage2_pgd_addr_end(addr, end);
+		if (!stage2_pgd_none(*pgd))
+			unmap_stage2_puds(kvm, pgd, addr, next);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -305,8 +307,7 @@ static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd,
 
 	pte = pte_offset_kernel(pmd, addr);
 	do {
-		if (!pte_none(*pte) &&
-		    (pte_val(*pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+		if (!pte_none(*pte) && !kvm_is_device_pfn(pte_pfn(*pte)))
 			kvm_flush_dcache_pte(*pte);
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
@@ -317,11 +318,11 @@ static void stage2_flush_pmds(struct kvm *kvm, pud_t *pud,
 	pmd_t *pmd;
 	phys_addr_t next;
 
-	pmd = pmd_offset(pud, addr);
+	pmd = stage2_pmd_offset(pud, addr);
 	do {
-		next = kvm_pmd_addr_end(addr, end);
+		next = stage2_pmd_addr_end(addr, end);
 		if (!pmd_none(*pmd)) {
-			if (kvm_pmd_huge(*pmd))
+			if (pmd_thp_or_huge(*pmd))
 				kvm_flush_dcache_pmd(*pmd);
 			else
 				stage2_flush_ptes(kvm, pmd, addr, next);
@@ -335,11 +336,11 @@ static void stage2_flush_puds(struct kvm *kvm, pgd_t *pgd,
 	pud_t *pud;
 	phys_addr_t next;
 
-	pud = pud_offset(pgd, addr);
+	pud = stage2_pud_offset(pgd, addr);
 	do {
-		next = kvm_pud_addr_end(addr, end);
-		if (!pud_none(*pud)) {
-			if (pud_huge(*pud))
+		next = stage2_pud_addr_end(addr, end);
+		if (!stage2_pud_none(*pud)) {
+			if (stage2_pud_huge(*pud))
 				kvm_flush_dcache_pud(*pud);
 			else
 				stage2_flush_pmds(kvm, pud, addr, next);
@@ -355,9 +356,9 @@ static void stage2_flush_memslot(struct kvm *kvm,
 	phys_addr_t next;
 	pgd_t *pgd;
 
-	pgd = kvm->arch.pgd + kvm_pgd_index(addr);
+	pgd = kvm->arch.pgd + stage2_pgd_index(addr);
 	do {
-		next = kvm_pgd_addr_end(addr, end);
+		next = stage2_pgd_addr_end(addr, end);
 		stage2_flush_puds(kvm, pgd, addr, next);
 	} while (pgd++, addr = next, addr != end);
 }
@@ -386,26 +387,98 @@ static void stage2_flush_vm(struct kvm *kvm)
 	srcu_read_unlock(&kvm->srcu, idx);
 }
 
-/**
- * free_boot_hyp_pgd - free HYP boot page tables
- *
- * Free the HYP boot page tables. The bounce page is also freed.
- */
-void free_boot_hyp_pgd(void)
+static void clear_hyp_pgd_entry(pgd_t *pgd)
 {
-	mutex_lock(&kvm_hyp_pgd_mutex);
+	pud_t *pud_table __maybe_unused = pud_offset(pgd, 0UL);
+	pgd_clear(pgd);
+	pud_free(NULL, pud_table);
+	put_page(virt_to_page(pgd));
+}
 
-	if (boot_hyp_pgd) {
-		unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
-		unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
-		free_pages((unsigned long)boot_hyp_pgd, hyp_pgd_order);
-		boot_hyp_pgd = NULL;
-	}
+static void clear_hyp_pud_entry(pud_t *pud)
+{
+	pmd_t *pmd_table __maybe_unused = pmd_offset(pud, 0);
+	VM_BUG_ON(pud_huge(*pud));
+	pud_clear(pud);
+	pmd_free(NULL, pmd_table);
+	put_page(virt_to_page(pud));
+}
 
-	if (hyp_pgd)
-		unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
+static void clear_hyp_pmd_entry(pmd_t *pmd)
+{
+	pte_t *pte_table = pte_offset_kernel(pmd, 0);
+	VM_BUG_ON(pmd_thp_or_huge(*pmd));
+	pmd_clear(pmd);
+	pte_free_kernel(NULL, pte_table);
+	put_page(virt_to_page(pmd));
+}
 
-	mutex_unlock(&kvm_hyp_pgd_mutex);
+static void unmap_hyp_ptes(pmd_t *pmd, phys_addr_t addr, phys_addr_t end)
+{
+	pte_t *pte, *start_pte;
+
+	start_pte = pte = pte_offset_kernel(pmd, addr);
+	do {
+		if (!pte_none(*pte)) {
+			kvm_set_pte(pte, __pte(0));
+			put_page(virt_to_page(pte));
+		}
+	} while (pte++, addr += PAGE_SIZE, addr != end);
+
+	if (hyp_pte_table_empty(start_pte))
+		clear_hyp_pmd_entry(pmd);
+}
+
+static void unmap_hyp_pmds(pud_t *pud, phys_addr_t addr, phys_addr_t end)
+{
+	phys_addr_t next;
+	pmd_t *pmd, *start_pmd;
+
+	start_pmd = pmd = pmd_offset(pud, addr);
+	do {
+		next = pmd_addr_end(addr, end);
+		/* Hyp doesn't use huge pmds */
+		if (!pmd_none(*pmd))
+			unmap_hyp_ptes(pmd, addr, next);
+	} while (pmd++, addr = next, addr != end);
+
+	if (hyp_pmd_table_empty(start_pmd))
+		clear_hyp_pud_entry(pud);
+}
+
+static void unmap_hyp_puds(pgd_t *pgd, phys_addr_t addr, phys_addr_t end)
+{
+	phys_addr_t next;
+	pud_t *pud, *start_pud;
+
+	start_pud = pud = pud_offset(pgd, addr);
+	do {
+		next = pud_addr_end(addr, end);
+		/* Hyp doesn't use huge puds */
+		if (!pud_none(*pud))
+			unmap_hyp_pmds(pud, addr, next);
+	} while (pud++, addr = next, addr != end);
+
+	if (hyp_pud_table_empty(start_pud))
+		clear_hyp_pgd_entry(pgd);
+}
+
+static void unmap_hyp_range(pgd_t *pgdp, phys_addr_t start, u64 size)
+{
+	pgd_t *pgd;
+	phys_addr_t addr = start, end = start + size;
+	phys_addr_t next;
+
+	/*
+	 * We don't unmap anything from HYP, except at the hyp tear down.
+	 * Hence, we don't have to invalidate the TLBs here.
+	 */
+	pgd = pgdp + pgd_index(addr);
+	do {
+		next = pgd_addr_end(addr, end);
+		if (!pgd_none(*pgd))
+			unmap_hyp_puds(pgd, addr, next);
+	} while (pgd++, addr = next, addr != end);
 }
 
 /**
@@ -422,15 +495,20 @@ void free_hyp_pgds(void)
 {
 	unsigned long addr;
 
-	free_boot_hyp_pgd();
-
 	mutex_lock(&kvm_hyp_pgd_mutex);
 
+	if (boot_hyp_pgd) {
+		unmap_hyp_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
+		free_pages((unsigned long)boot_hyp_pgd, hyp_pgd_order);
+		boot_hyp_pgd = NULL;
+	}
+
 	if (hyp_pgd) {
+		unmap_hyp_range(hyp_pgd, hyp_idmap_start, PAGE_SIZE);
 		for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE)
-			unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+			unmap_hyp_range(hyp_pgd, kern_hyp_va(addr), PGDIR_SIZE);
 		for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
-			unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+			unmap_hyp_range(hyp_pgd, kern_hyp_va(addr), PGDIR_SIZE);
 
 		free_pages((unsigned long)hyp_pgd, hyp_pgd_order);
 		hyp_pgd = NULL;
@@ -582,17 +660,21 @@ static phys_addr_t kvm_kaddr_to_phys(void *kaddr)
  * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode
  * @from:	The virtual kernel start address of the range
  * @to:		The virtual kernel end address of the range (exclusive)
+ * @prot:	The protection to be applied to this range
  *
  * The same virtual address as the kernel virtual address is also used
  * in Hyp-mode mapping (modulo HYP_PAGE_OFFSET) to the same underlying
  * physical pages.
  */
-int create_hyp_mappings(void *from, void *to)
+int create_hyp_mappings(void *from, void *to, pgprot_t prot)
 {
 	phys_addr_t phys_addr;
 	unsigned long virt_addr;
-	unsigned long start = KERN_TO_HYP((unsigned long)from);
-	unsigned long end = KERN_TO_HYP((unsigned long)to);
+	unsigned long start = kern_hyp_va((unsigned long)from);
+	unsigned long end = kern_hyp_va((unsigned long)to);
+
+	if (is_kernel_in_hyp_mode())
+		return 0;
 
 	start = start & PAGE_MASK;
 	end = PAGE_ALIGN(end);
@@ -604,7 +686,7 @@ int create_hyp_mappings(void *from, void *to)
 		err = __create_hyp_mappings(hyp_pgd, virt_addr,
 					    virt_addr + PAGE_SIZE,
 					    __phys_to_pfn(phys_addr),
-					    PAGE_HYP);
+					    prot);
 		if (err)
 			return err;
 	}
@@ -623,8 +705,11 @@ int create_hyp_mappings(void *from, void *to)
  */
 int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr)
 {
-	unsigned long start = KERN_TO_HYP((unsigned long)from);
-	unsigned long end = KERN_TO_HYP((unsigned long)to);
+	unsigned long start = kern_hyp_va((unsigned long)from);
+	unsigned long end = kern_hyp_va((unsigned long)to);
+
+	if (is_kernel_in_hyp_mode())
+		return 0;
 
 	/* Check for a valid kernel IO mapping */
 	if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1))
@@ -634,27 +719,13 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr)
 				     __phys_to_pfn(phys_addr), PAGE_HYP_DEVICE);
 }
 
-/* Free the HW pgd, one page at a time */
-static void kvm_free_hwpgd(void *hwpgd)
-{
-	free_pages_exact(hwpgd, kvm_get_hwpgd_size());
-}
-
-/* Allocate the HW PGD, making sure that each page gets its own refcount */
-static void *kvm_alloc_hwpgd(void)
-{
-	unsigned int size = kvm_get_hwpgd_size();
-
-	return alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
-}
-
 /**
  * kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation.
  * @kvm:	The KVM struct pointer for the VM.
  *
- * Allocates the 1st level table only of size defined by S2_PGD_ORDER (can
- * support either full 40-bit input addresses or limited to 32-bit input
- * addresses). Clears the allocated pages.
+ * Allocates only the stage-2 HW PGD level table(s) (can support either full
+ * 40-bit input addresses or limited to 32-bit input addresses). Clears the
+ * allocated pages.
  *
  * Note we don't need locking here as this is only called when the VM is
  * created, which can only be done once.
@@ -662,81 +733,22 @@ static void *kvm_alloc_hwpgd(void)
 int kvm_alloc_stage2_pgd(struct kvm *kvm)
 {
 	pgd_t *pgd;
-	void *hwpgd;
 
 	if (kvm->arch.pgd != NULL) {
 		kvm_err("kvm_arch already initialized?\n");
 		return -EINVAL;
 	}
 
-	hwpgd = kvm_alloc_hwpgd();
-	if (!hwpgd)
+	/* Allocate the HW PGD, making sure that each page gets its own refcount */
+	pgd = alloc_pages_exact(S2_PGD_SIZE, GFP_KERNEL | __GFP_ZERO);
+	if (!pgd)
 		return -ENOMEM;
 
-	/* When the kernel uses more levels of page tables than the
-	 * guest, we allocate a fake PGD and pre-populate it to point
-	 * to the next-level page table, which will be the real
-	 * initial page table pointed to by the VTTBR.
-	 *
-	 * When KVM_PREALLOC_LEVEL==2, we allocate a single page for
-	 * the PMD and the kernel will use folded pud.
-	 * When KVM_PREALLOC_LEVEL==1, we allocate 2 consecutive PUD
-	 * pages.
-	 */
-	if (KVM_PREALLOC_LEVEL > 0) {
-		int i;
-
-		/*
-		 * Allocate fake pgd for the page table manipulation macros to
-		 * work.  This is not used by the hardware and we have no
-		 * alignment requirement for this allocation.
-		 */
-		pgd = kmalloc(PTRS_PER_S2_PGD * sizeof(pgd_t),
-				GFP_KERNEL | __GFP_ZERO);
-
-		if (!pgd) {
-			kvm_free_hwpgd(hwpgd);
-			return -ENOMEM;
-		}
-
-		/* Plug the HW PGD into the fake one. */
-		for (i = 0; i < PTRS_PER_S2_PGD; i++) {
-			if (KVM_PREALLOC_LEVEL == 1)
-				pgd_populate(NULL, pgd + i,
-					     (pud_t *)hwpgd + i * PTRS_PER_PUD);
-			else if (KVM_PREALLOC_LEVEL == 2)
-				pud_populate(NULL, pud_offset(pgd, 0) + i,
-					     (pmd_t *)hwpgd + i * PTRS_PER_PMD);
-		}
-	} else {
-		/*
-		 * Allocate actual first-level Stage-2 page table used by the
-		 * hardware for Stage-2 page table walks.
-		 */
-		pgd = (pgd_t *)hwpgd;
-	}
-
 	kvm_clean_pgd(pgd);
 	kvm->arch.pgd = pgd;
 	return 0;
 }
 
-/**
- * unmap_stage2_range -- Clear stage2 page table entries to unmap a range
- * @kvm:   The VM pointer
- * @start: The intermediate physical base address of the range to unmap
- * @size:  The size of the area to unmap
- *
- * Clear a range of stage-2 mappings, lowering the various ref-counts.  Must
- * be called while holding mmu_lock (unless for freeing the stage2 pgd before
- * destroying the VM), otherwise another faulting VCPU may come in and mess
- * with things behind our backs.
- */
-static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
-{
-	unmap_range(kvm, kvm->arch.pgd, start, size);
-}
-
 static void stage2_unmap_memslot(struct kvm *kvm,
 				 struct kvm_memory_slot *memslot)
 {
@@ -819,10 +831,8 @@ void kvm_free_stage2_pgd(struct kvm *kvm)
 		return;
 
 	unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
-	kvm_free_hwpgd(kvm_get_hwpgd(kvm));
-	if (KVM_PREALLOC_LEVEL > 0)
-		kfree(kvm->arch.pgd);
-
+	/* Free the HW pgd, one page at a time */
+	free_pages_exact(kvm->arch.pgd, S2_PGD_SIZE);
 	kvm->arch.pgd = NULL;
 }
 
@@ -832,16 +842,16 @@ static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache
 	pgd_t *pgd;
 	pud_t *pud;
 
-	pgd = kvm->arch.pgd + kvm_pgd_index(addr);
-	if (WARN_ON(pgd_none(*pgd))) {
+	pgd = kvm->arch.pgd + stage2_pgd_index(addr);
+	if (WARN_ON(stage2_pgd_none(*pgd))) {
 		if (!cache)
 			return NULL;
 		pud = mmu_memory_cache_alloc(cache);
-		pgd_populate(NULL, pgd, pud);
+		stage2_pgd_populate(pgd, pud);
 		get_page(virt_to_page(pgd));
 	}
 
-	return pud_offset(pgd, addr);
+	return stage2_pud_offset(pgd, addr);
 }
 
 static pmd_t *stage2_get_pmd(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
@@ -851,15 +861,15 @@ static pmd_t *stage2_get_pmd(struct kvm *kvm, struct kvm_mmu_memory_cache *cache
 	pmd_t *pmd;
 
 	pud = stage2_get_pud(kvm, cache, addr);
-	if (pud_none(*pud)) {
+	if (stage2_pud_none(*pud)) {
 		if (!cache)
 			return NULL;
 		pmd = mmu_memory_cache_alloc(cache);
-		pud_populate(NULL, pud, pmd);
+		stage2_pud_populate(pud, pmd);
 		get_page(virt_to_page(pud));
 	}
 
-	return pmd_offset(pud, addr);
+	return stage2_pmd_offset(pud, addr);
 }
 
 static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
@@ -882,11 +892,14 @@ static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
 	VM_BUG_ON(pmd_present(*pmd) && pmd_pfn(*pmd) != pmd_pfn(*new_pmd));
 
 	old_pmd = *pmd;
-	kvm_set_pmd(pmd, *new_pmd);
-	if (pmd_present(old_pmd))
+	if (pmd_present(old_pmd)) {
+		pmd_clear(pmd);
 		kvm_tlb_flush_vmid_ipa(kvm, addr);
-	else
+	} else {
 		get_page(virt_to_page(pmd));
+	}
+
+	kvm_set_pmd(pmd, *new_pmd);
 	return 0;
 }
 
@@ -935,14 +948,37 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
 
 	/* Create 2nd stage page table mapping - Level 3 */
 	old_pte = *pte;
-	kvm_set_pte(pte, *new_pte);
-	if (pte_present(old_pte))
+	if (pte_present(old_pte)) {
+		kvm_set_pte(pte, __pte(0));
 		kvm_tlb_flush_vmid_ipa(kvm, addr);
-	else
+	} else {
 		get_page(virt_to_page(pte));
+	}
+
+	kvm_set_pte(pte, *new_pte);
+	return 0;
+}
 
+#ifndef __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static int stage2_ptep_test_and_clear_young(pte_t *pte)
+{
+	if (pte_young(*pte)) {
+		*pte = pte_mkold(*pte);
+		return 1;
+	}
 	return 0;
 }
+#else
+static int stage2_ptep_test_and_clear_young(pte_t *pte)
+{
+	return __ptep_test_and_clear_young(pte);
+}
+#endif
+
+static int stage2_pmdp_test_and_clear_young(pmd_t *pmd)
+{
+	return stage2_ptep_test_and_clear_young((pte_t *)pmd);
+}
 
 /**
  * kvm_phys_addr_ioremap - map a device range to guest IPA
@@ -967,7 +1003,7 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 		pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE);
 
 		if (writable)
-			kvm_set_s2pte_writable(&pte);
+			pte = kvm_s2pte_mkwrite(pte);
 
 		ret = mmu_topup_memory_cache(&cache, KVM_MMU_CACHE_MIN_PAGES,
 						KVM_NR_MEM_OBJS);
@@ -988,12 +1024,12 @@ out:
 	return ret;
 }
 
-static bool transparent_hugepage_adjust(pfn_t *pfnp, phys_addr_t *ipap)
+static bool transparent_hugepage_adjust(kvm_pfn_t *pfnp, phys_addr_t *ipap)
 {
-	pfn_t pfn = *pfnp;
+	kvm_pfn_t pfn = *pfnp;
 	gfn_t gfn = *ipap >> PAGE_SHIFT;
 
-	if (PageTransCompound(pfn_to_page(pfn))) {
+	if (PageTransCompoundMap(pfn_to_page(pfn))) {
 		unsigned long mask;
 		/*
 		 * The address we faulted on is backed by a transparent huge
@@ -1037,11 +1073,6 @@ static bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_dabt_iswrite(vcpu);
 }
 
-static bool kvm_is_device_pfn(unsigned long pfn)
-{
-	return !pfn_valid(pfn);
-}
-
 /**
  * stage2_wp_ptes - write protect PMD range
  * @pmd:	pointer to pmd entry
@@ -1072,12 +1103,12 @@ static void stage2_wp_pmds(pud_t *pud, phys_addr_t addr, phys_addr_t end)
 	pmd_t *pmd;
 	phys_addr_t next;
 
-	pmd = pmd_offset(pud, addr);
+	pmd = stage2_pmd_offset(pud, addr);
 
 	do {
-		next = kvm_pmd_addr_end(addr, end);
+		next = stage2_pmd_addr_end(addr, end);
 		if (!pmd_none(*pmd)) {
-			if (kvm_pmd_huge(*pmd)) {
+			if (pmd_thp_or_huge(*pmd)) {
 				if (!kvm_s2pmd_readonly(pmd))
 					kvm_set_s2pmd_readonly(pmd);
 			} else {
@@ -1100,12 +1131,12 @@ static void  stage2_wp_puds(pgd_t *pgd, phys_addr_t addr, phys_addr_t end)
 	pud_t *pud;
 	phys_addr_t next;
 
-	pud = pud_offset(pgd, addr);
+	pud = stage2_pud_offset(pgd, addr);
 	do {
-		next = kvm_pud_addr_end(addr, end);
-		if (!pud_none(*pud)) {
+		next = stage2_pud_addr_end(addr, end);
+		if (!stage2_pud_none(*pud)) {
 			/* TODO:PUD not supported, revisit later if supported */
-			BUG_ON(kvm_pud_huge(*pud));
+			BUG_ON(stage2_pud_huge(*pud));
 			stage2_wp_pmds(pud, addr, next);
 		}
 	} while (pud++, addr = next, addr != end);
@@ -1122,7 +1153,7 @@ static void stage2_wp_range(struct kvm *kvm, phys_addr_t addr, phys_addr_t end)
 	pgd_t *pgd;
 	phys_addr_t next;
 
-	pgd = kvm->arch.pgd + kvm_pgd_index(addr);
+	pgd = kvm->arch.pgd + stage2_pgd_index(addr);
 	do {
 		/*
 		 * Release kvm_mmu_lock periodically if the memory region is
@@ -1134,8 +1165,8 @@ static void stage2_wp_range(struct kvm *kvm, phys_addr_t addr, phys_addr_t end)
 		if (need_resched() || spin_needbreak(&kvm->mmu_lock))
 			cond_resched_lock(&kvm->mmu_lock);
 
-		next = kvm_pgd_addr_end(addr, end);
-		if (pgd_present(*pgd))
+		next = stage2_pgd_addr_end(addr, end);
+		if (stage2_pgd_present(*pgd))
 			stage2_wp_puds(pgd, addr, next);
 	} while (pgd++, addr = next, addr != end);
 }
@@ -1202,7 +1233,7 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
 	kvm_mmu_write_protect_pt_masked(kvm, slot, gfn_offset, mask);
 }
 
-static void coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
+static void coherent_cache_guest_page(struct kvm_vcpu *vcpu, kvm_pfn_t pfn,
 				      unsigned long size, bool uncached)
 {
 	__coherent_cache_guest_page(vcpu, pfn, size, uncached);
@@ -1219,7 +1250,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	struct kvm *kvm = vcpu->kvm;
 	struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
 	struct vm_area_struct *vma;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	pgprot_t mem_type = PAGE_S2;
 	bool fault_ipa_uncached;
 	bool logging_active = memslot_is_logging(memslot);
@@ -1278,7 +1309,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	smp_rmb();
 
 	pfn = gfn_to_pfn_prot(kvm, gfn, write_fault, &writable);
-	if (is_error_pfn(pfn))
+	if (is_error_noslot_pfn(pfn))
 		return -EFAULT;
 
 	if (kvm_is_device_pfn(pfn)) {
@@ -1314,7 +1345,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		pmd_t new_pmd = pfn_pmd(pfn, mem_type);
 		new_pmd = pmd_mkhuge(new_pmd);
 		if (writable) {
-			kvm_set_s2pmd_writable(&new_pmd);
+			new_pmd = kvm_s2pmd_mkwrite(new_pmd);
 			kvm_set_pfn_dirty(pfn);
 		}
 		coherent_cache_guest_page(vcpu, pfn, PMD_SIZE, fault_ipa_uncached);
@@ -1323,7 +1354,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		pte_t new_pte = pfn_pte(pfn, mem_type);
 
 		if (writable) {
-			kvm_set_s2pte_writable(&new_pte);
+			new_pte = kvm_s2pte_mkwrite(new_pte);
 			kvm_set_pfn_dirty(pfn);
 			mark_page_dirty(kvm, gfn);
 		}
@@ -1342,12 +1373,14 @@ out_unlock:
  * Resolve the access fault by making the page young again.
  * Note that because the faulting entry is guaranteed not to be
  * cached in the TLB, we don't need to invalidate anything.
+ * Only the HW Access Flag updates are supported for Stage 2 (no DBM),
+ * so there is no need for atomic (pte|pmd)_mkyoung operations.
  */
 static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
 {
 	pmd_t *pmd;
 	pte_t *pte;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	bool pfn_valid = false;
 
 	trace_kvm_access_fault(fault_ipa);
@@ -1358,7 +1391,7 @@ static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
 	if (!pmd || pmd_none(*pmd))	/* Nothing there */
 		goto out;
 
-	if (kvm_pmd_huge(*pmd)) {	/* THP, HugeTLB */
+	if (pmd_thp_or_huge(*pmd)) {	/* THP, HugeTLB */
 		*pmd = pmd_mkyoung(*pmd);
 		pfn = pmd_pfn(*pmd);
 		pfn_valid = true;
@@ -1432,6 +1465,22 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		}
 
 		/*
+		 * Check for a cache maintenance operation. Since we
+		 * ended-up here, we know it is outside of any memory
+		 * slot. But we can't find out if that is for a device,
+		 * or if the guest is just being stupid. The only thing
+		 * we know for sure is that this range cannot be cached.
+		 *
+		 * So let's assume that the guest is just being
+		 * cautious, and skip the instruction.
+		 */
+		if (kvm_vcpu_dabt_is_cm(vcpu)) {
+			kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+			ret = 1;
+			goto out_unlock;
+		}
+
+		/*
 		 * The IPA is reported as [MAX:12], so we need to
 		 * complement it with the bottom 12 bits from the
 		 * faulting VA. This is always 12 bits, irrespective
@@ -1566,25 +1615,14 @@ static int kvm_age_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
 	if (!pmd || pmd_none(*pmd))	/* Nothing there */
 		return 0;
 
-	if (kvm_pmd_huge(*pmd)) {	/* THP, HugeTLB */
-		if (pmd_young(*pmd)) {
-			*pmd = pmd_mkold(*pmd);
-			return 1;
-		}
-
-		return 0;
-	}
+	if (pmd_thp_or_huge(*pmd))	/* THP, HugeTLB */
+		return stage2_pmdp_test_and_clear_young(pmd);
 
 	pte = pte_offset_kernel(pmd, gpa);
 	if (pte_none(*pte))
 		return 0;
 
-	if (pte_young(*pte)) {
-		*pte = pte_mkold(*pte);	/* Just a page... */
-		return 1;
-	}
-
-	return 0;
+	return stage2_ptep_test_and_clear_young(pte);
 }
 
 static int kvm_test_age_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
@@ -1596,7 +1634,7 @@ static int kvm_test_age_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
 	if (!pmd || pmd_none(*pmd))	/* Nothing there */
 		return 0;
 
-	if (kvm_pmd_huge(*pmd))		/* THP, HugeTLB */
+	if (pmd_thp_or_huge(*pmd))		/* THP, HugeTLB */
 		return pmd_young(*pmd);
 
 	pte = pte_offset_kernel(pmd, gpa);
@@ -1631,17 +1669,30 @@ phys_addr_t kvm_mmu_get_httbr(void)
 		return virt_to_phys(hyp_pgd);
 }
 
-phys_addr_t kvm_mmu_get_boot_httbr(void)
+phys_addr_t kvm_get_idmap_vector(void)
 {
-	if (__kvm_cpu_uses_extended_idmap())
-		return virt_to_phys(merged_hyp_pgd);
-	else
-		return virt_to_phys(boot_hyp_pgd);
+	return hyp_idmap_vector;
 }
 
-phys_addr_t kvm_get_idmap_vector(void)
+phys_addr_t kvm_get_idmap_start(void)
 {
-	return hyp_idmap_vector;
+	return hyp_idmap_start;
+}
+
+static int kvm_map_idmap_text(pgd_t *pgd)
+{
+	int err;
+
+	/* Create the idmap in the boot page tables */
+	err = 	__create_hyp_mappings(pgd,
+				      hyp_idmap_start, hyp_idmap_end,
+				      __phys_to_pfn(hyp_idmap_start),
+				      PAGE_HYP_EXEC);
+	if (err)
+		kvm_err("Failed to idmap %lx-%lx\n",
+			hyp_idmap_start, hyp_idmap_end);
+
+	return err;
 }
 
 int kvm_mmu_init(void)
@@ -1658,28 +1709,42 @@ int kvm_mmu_init(void)
 	 */
 	BUG_ON((hyp_idmap_start ^ (hyp_idmap_end - 1)) & PAGE_MASK);
 
-	hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order);
-	boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order);
+	kvm_info("IDMAP page: %lx\n", hyp_idmap_start);
+	kvm_info("HYP VA range: %lx:%lx\n",
+		 kern_hyp_va(PAGE_OFFSET), kern_hyp_va(~0UL));
 
-	if (!hyp_pgd || !boot_hyp_pgd) {
-		kvm_err("Hyp mode PGD not allocated\n");
-		err = -ENOMEM;
+	if (hyp_idmap_start >= kern_hyp_va(PAGE_OFFSET) &&
+	    hyp_idmap_start <  kern_hyp_va(~0UL) &&
+	    hyp_idmap_start != (unsigned long)__hyp_idmap_text_start) {
+		/*
+		 * The idmap page is intersecting with the VA space,
+		 * it is not safe to continue further.
+		 */
+		kvm_err("IDMAP intersecting with HYP VA, unable to continue\n");
+		err = -EINVAL;
 		goto out;
 	}
 
-	/* Create the idmap in the boot page tables */
-	err = 	__create_hyp_mappings(boot_hyp_pgd,
-				      hyp_idmap_start, hyp_idmap_end,
-				      __phys_to_pfn(hyp_idmap_start),
-				      PAGE_HYP);
-
-	if (err) {
-		kvm_err("Failed to idmap %lx-%lx\n",
-			hyp_idmap_start, hyp_idmap_end);
+	hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order);
+	if (!hyp_pgd) {
+		kvm_err("Hyp mode PGD not allocated\n");
+		err = -ENOMEM;
 		goto out;
 	}
 
 	if (__kvm_cpu_uses_extended_idmap()) {
+		boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+							 hyp_pgd_order);
+		if (!boot_hyp_pgd) {
+			kvm_err("Hyp boot PGD not allocated\n");
+			err = -ENOMEM;
+			goto out;
+		}
+
+		err = kvm_map_idmap_text(boot_hyp_pgd);
+		if (err)
+			goto out;
+
 		merged_hyp_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
 		if (!merged_hyp_pgd) {
 			kvm_err("Failed to allocate extra HYP pgd\n");
@@ -1687,29 +1752,10 @@ int kvm_mmu_init(void)
 		}
 		__kvm_extend_hypmap(boot_hyp_pgd, hyp_pgd, merged_hyp_pgd,
 				    hyp_idmap_start);
-		return 0;
-	}
-
-	/* Map the very same page at the trampoline VA */
-	err = 	__create_hyp_mappings(boot_hyp_pgd,
-				      TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE,
-				      __phys_to_pfn(hyp_idmap_start),
-				      PAGE_HYP);
-	if (err) {
-		kvm_err("Failed to map trampoline @%lx into boot HYP pgd\n",
-			TRAMPOLINE_VA);
-		goto out;
-	}
-
-	/* Map the same page again into the runtime page tables */
-	err = 	__create_hyp_mappings(hyp_pgd,
-				      TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE,
-				      __phys_to_pfn(hyp_idmap_start),
-				      PAGE_HYP);
-	if (err) {
-		kvm_err("Failed to map trampoline @%lx into runtime HYP pgd\n",
-			TRAMPOLINE_VA);
-		goto out;
+	} else {
+		err = kvm_map_idmap_text(hyp_pgd);
+		if (err)
+			goto out;
 	}
 
 	return 0;
@@ -1792,8 +1838,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 		if (vma->vm_flags & VM_PFNMAP) {
 			gpa_t gpa = mem->guest_phys_addr +
 				    (vm_start - mem->userspace_addr);
-			phys_addr_t pa = (vma->vm_pgoff << PAGE_SHIFT) +
-					 vm_start - vma->vm_start;
+			phys_addr_t pa;
+
+			pa = (phys_addr_t)vma->vm_pgoff << PAGE_SHIFT;
+			pa += vm_start - vma->vm_start;
 
 			/* IO region dirty page logging not allowed */
 			if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES)
@@ -1846,6 +1894,7 @@ void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots)
 
 void kvm_arch_flush_shadow_all(struct kvm *kvm)
 {
+	kvm_free_stage2_pgd(kvm);
 }
 
 void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
index 4b94b5131..c2b131527 100644
--- a/arch/arm/kvm/psci.c
+++ b/arch/arm/kvm/psci.c
@@ -63,19 +63,19 @@ static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu)
 
 static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.pause = true;
+	vcpu->arch.power_off = true;
 }
 
 static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 {
 	struct kvm *kvm = source_vcpu->kvm;
 	struct kvm_vcpu *vcpu = NULL;
-	wait_queue_head_t *wq;
+	struct swait_queue_head *wq;
 	unsigned long cpu_id;
 	unsigned long context_id;
 	phys_addr_t target_pc;
 
-	cpu_id = *vcpu_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK;
+	cpu_id = vcpu_get_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK;
 	if (vcpu_mode_is_32bit(source_vcpu))
 		cpu_id &= ~((u32) 0);
 
@@ -87,15 +87,15 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	 */
 	if (!vcpu)
 		return PSCI_RET_INVALID_PARAMS;
-	if (!vcpu->arch.pause) {
+	if (!vcpu->arch.power_off) {
 		if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1)
 			return PSCI_RET_ALREADY_ON;
 		else
 			return PSCI_RET_INVALID_PARAMS;
 	}
 
-	target_pc = *vcpu_reg(source_vcpu, 2);
-	context_id = *vcpu_reg(source_vcpu, 3);
+	target_pc = vcpu_get_reg(source_vcpu, 2);
+	context_id = vcpu_get_reg(source_vcpu, 3);
 
 	kvm_reset_vcpu(vcpu);
 
@@ -114,19 +114,19 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	 * NOTE: We always update r0 (or x0) because for PSCI v0.1
 	 * the general puspose registers are undefined upon CPU_ON.
 	 */
-	*vcpu_reg(vcpu, 0) = context_id;
-	vcpu->arch.pause = false;
+	vcpu_set_reg(vcpu, 0, context_id);
+	vcpu->arch.power_off = false;
 	smp_mb();		/* Make sure the above is visible */
 
 	wq = kvm_arch_vcpu_wq(vcpu);
-	wake_up_interruptible(wq);
+	swake_up(wq);
 
 	return PSCI_RET_SUCCESS;
 }
 
 static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
 {
-	int i;
+	int i, matching_cpus = 0;
 	unsigned long mpidr;
 	unsigned long target_affinity;
 	unsigned long target_affinity_mask;
@@ -134,8 +134,8 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
 	struct kvm *kvm = vcpu->kvm;
 	struct kvm_vcpu *tmp;
 
-	target_affinity = *vcpu_reg(vcpu, 1);
-	lowest_affinity_level = *vcpu_reg(vcpu, 2);
+	target_affinity = vcpu_get_reg(vcpu, 1);
+	lowest_affinity_level = vcpu_get_reg(vcpu, 2);
 
 	/* Determine target affinity mask */
 	target_affinity_mask = psci_affinity_mask(lowest_affinity_level);
@@ -151,12 +151,16 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
 	 */
 	kvm_for_each_vcpu(i, tmp, kvm) {
 		mpidr = kvm_vcpu_get_mpidr_aff(tmp);
-		if (((mpidr & target_affinity_mask) == target_affinity) &&
-		    !tmp->arch.pause) {
-			return PSCI_0_2_AFFINITY_LEVEL_ON;
+		if ((mpidr & target_affinity_mask) == target_affinity) {
+			matching_cpus++;
+			if (!tmp->arch.power_off)
+				return PSCI_0_2_AFFINITY_LEVEL_ON;
 		}
 	}
 
+	if (!matching_cpus)
+		return PSCI_RET_INVALID_PARAMS;
+
 	return PSCI_0_2_AFFINITY_LEVEL_OFF;
 }
 
@@ -175,7 +179,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)
 	 * re-initialized.
 	 */
 	kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
-		tmp->arch.pause = true;
+		tmp->arch.power_off = true;
 		kvm_vcpu_kick(tmp);
 	}
 
@@ -205,7 +209,7 @@ int kvm_psci_version(struct kvm_vcpu *vcpu)
 static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 {
 	int ret = 1;
-	unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0);
+	unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
 	unsigned long val;
 
 	switch (psci_fn) {
@@ -269,13 +273,13 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 		break;
 	}
 
-	*vcpu_reg(vcpu, 0) = val;
+	vcpu_set_reg(vcpu, 0, val);
 	return ret;
 }
 
 static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 {
-	unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0);
+	unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
 	unsigned long val;
 
 	switch (psci_fn) {
@@ -291,7 +295,7 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 		break;
 	}
 
-	*vcpu_reg(vcpu, 0) = val;
+	vcpu_set_reg(vcpu, 0, val);
 	return 1;
 }
 
diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c
index f558c073c..4b5e802e5 100644
--- a/arch/arm/kvm/reset.c
+++ b/arch/arm/kvm/reset.c
@@ -52,7 +52,7 @@ static const struct kvm_irq_level cortexa_vtimer_irq = {
  * @vcpu: The VCPU pointer
  *
  * This function finds the right table above and sets the registers on the
- * virtual CPU struct to their architectually defined reset values.
+ * virtual CPU struct to their architecturally defined reset values.
  */
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
@@ -71,13 +71,11 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	}
 
 	/* Reset core registers */
-	memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs));
+	memcpy(&vcpu->arch.ctxt.gp_regs, reset_regs, sizeof(vcpu->arch.ctxt.gp_regs));
 
 	/* Reset CP15 registers */
 	kvm_reset_coprocs(vcpu);
 
 	/* Reset arch_timer context */
-	kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
-
-	return 0;
+	return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
 }
diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h
index 0ec35392d..c25a88598 100644
--- a/arch/arm/kvm/trace.h
+++ b/arch/arm/kvm/trace.h
@@ -25,21 +25,25 @@ TRACE_EVENT(kvm_entry,
 );
 
 TRACE_EVENT(kvm_exit,
-	TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc),
-	TP_ARGS(exit_reason, vcpu_pc),
+	TP_PROTO(int idx, unsigned int exit_reason, unsigned long vcpu_pc),
+	TP_ARGS(idx, exit_reason, vcpu_pc),
 
 	TP_STRUCT__entry(
+		__field(	int,		idx		)
 		__field(	unsigned int,	exit_reason	)
 		__field(	unsigned long,	vcpu_pc		)
 	),
 
 	TP_fast_assign(
+		__entry->idx			= idx;
 		__entry->exit_reason		= exit_reason;
 		__entry->vcpu_pc		= vcpu_pc;
 	),
 
-	TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx",
+	TP_printk("%s: HSR_EC: 0x%04x (%s), PC: 0x%08lx",
+		  __print_symbolic(__entry->idx, kvm_arm_exception_type),
 		  __entry->exit_reason,
+		  __print_symbolic(__entry->exit_reason, kvm_arm_exception_class),
 		  __entry->vcpu_pc)
 );
 
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index d8a780799..27f4d9625 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -29,7 +29,10 @@ else
   lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
 endif
 
-lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
+ifeq ($(CONFIG_ARCH_RPC),y)
+  lib-y				+= ecard.o io-acorn.o floppydma.o
+  AFLAGS_delay-loop.o		+= -march=armv4
+endif
 
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
 $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 1710fd7db..e936352cc 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -9,17 +9,20 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 		.text
 
-/* Prototype: int __clear_user(void *addr, size_t sz)
+/* Prototype: unsigned long arm_clear_user(void *addr, size_t sz)
  * Purpose  : clear some user memory
  * Params   : addr - user memory address to clear
  *          : sz   - number of bytes to clear
  * Returns  : number of bytes NOT cleared
  */
 ENTRY(__clear_user_std)
-WEAK(__clear_user)
+WEAK(arm_clear_user)
+UNWIND(.fnstart)
+UNWIND(.save {r1, lr})
 		stmfd	sp!, {r1, lr}
 		mov	r2, #0
 		cmp	r1, #4
@@ -44,7 +47,8 @@ WEAK(__clear_user)
 USER(		strnebt	r2, [r0])
 		mov	r0, #0
 		ldmfd	sp!, {r1, pc}
-ENDPROC(__clear_user)
+UNWIND(.fnend)
+ENDPROC(arm_clear_user)
 ENDPROC(__clear_user_std)
 
 		.pushsection .text.fixup,"ax"
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 7a235b995..1512bebfb 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -17,7 +17,7 @@
 /*
  * Prototype:
  *
- *	size_t __copy_from_user(void *to, const void *from, size_t n)
+ *	size_t arm_copy_from_user(void *to, const void *from, size_t n)
  *
  * Purpose:
  *
@@ -89,11 +89,11 @@
 
 	.text
 
-ENTRY(__copy_from_user)
+ENTRY(arm_copy_from_user)
 
 #include "copy_template.S"
 
-ENDPROC(__copy_from_user)
+ENDPROC(arm_copy_from_user)
 
 	.pushsection .fixup,"ax"
 	.align 0
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 9648b0675..caf5019d8 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -17,7 +17,7 @@
 /*
  * Prototype:
  *
- *	size_t __copy_to_user(void *to, const void *from, size_t n)
+ *	size_t arm_copy_to_user(void *to, const void *from, size_t n)
  *
  * Purpose:
  *
@@ -93,11 +93,11 @@
 	.text
 
 ENTRY(__copy_to_user_std)
-WEAK(__copy_to_user)
+WEAK(arm_copy_to_user)
 
 #include "copy_template.S"
 
-ENDPROC(__copy_to_user)
+ENDPROC(arm_copy_to_user)
 ENDPROC(__copy_to_user_std)
 
 	.pushsection .text.fixup,"ax"
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 1d0957e61..1712f132b 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -17,6 +17,19 @@
 
 		.text
 
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+		.macro	save_regs
+		mrc	p15, 0, ip, c3, c0, 0
+		stmfd	sp!, {r1, r2, r4 - r8, ip, lr}
+		uaccess_enable ip
+		.endm
+
+		.macro	load_regs
+		ldmfd	sp!, {r1, r2, r4 - r8, ip, lr}
+		mcr	p15, 0, ip, c3, c0, 0
+		ret	lr
+		.endm
+#else
 		.macro	save_regs
 		stmfd	sp!, {r1, r2, r4 - r8, lr}
 		.endm
@@ -24,6 +37,7 @@
 		.macro	load_regs
 		ldmfd	sp!, {r1, r2, r4 - r8, pc}
 		.endm
+#endif
 
 		.macro	load1b,	reg1
 		ldrusr	\reg1, r0, 1
diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S
index 518bf6e93..792c59d88 100644
--- a/arch/arm/lib/delay-loop.S
+++ b/arch/arm/lib/delay-loop.S
@@ -10,6 +10,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/delay.h>
+
 		.text
 
 .LC0:		.word	loops_per_jiffy
@@ -17,7 +18,6 @@
 
 /*
  * r0  <= 2000
- * lpj <= 0x01ffffff (max. 3355 bogomips)
  * HZ  <= 1000
  */
 
@@ -25,16 +25,11 @@ ENTRY(__loop_udelay)
 		ldr	r2, .LC1
 		mul	r0, r2, r0
 ENTRY(__loop_const_udelay)			@ 0 <= r0 <= 0x7fffff06
-		mov	r1, #-1
 		ldr	r2, .LC0
-		ldr	r2, [r2]		@ max = 0x01ffffff
-		add	r0, r0, r1, lsr #32-14
-		mov	r0, r0, lsr #14		@ max = 0x0001ffff
-		add	r2, r2, r1, lsr #32-10
-		mov	r2, r2, lsr #10		@ max = 0x00007fff
-		mul	r0, r2, r0		@ max = 2^32-1
-		add	r0, r0, r1, lsr #32-6
-		movs	r0, r0, lsr #6
+		ldr	r2, [r2]
+		umull	r1, r0, r2, r0
+		adds	r1, r1, #0xffffffff
+		adcs	r0, r0, r0
 		reteq	lr
 
 /*
diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S
index af2267f6a..9397b2e53 100644
--- a/arch/arm/lib/lib1funcs.S
+++ b/arch/arm/lib/lib1funcs.S
@@ -205,6 +205,10 @@ Boston, MA 02111-1307, USA.  */
 .endm
 
 
+#ifdef CONFIG_ARM_PATCH_IDIV
+	.align	3
+#endif
+
 ENTRY(__udivsi3)
 ENTRY(__aeabi_uidiv)
 UNWIND(.fnstart)
@@ -253,6 +257,10 @@ UNWIND(.fnstart)
 UNWIND(.fnend)
 ENDPROC(__umodsi3)
 
+#ifdef CONFIG_ARM_PATCH_IDIV
+	.align 3
+#endif
+
 ENTRY(__divsi3)
 ENTRY(__aeabi_idiv)
 UNWIND(.fnstart)
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 4b39af2df..6bd1089b0 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -52,14 +52,13 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 	 *
 	 * Lock the page table for the destination and check
 	 * to see that it's still huge and whether or not we will
-	 * need to fault on write, or if we have a splitting THP.
+	 * need to fault on write.
 	 */
 	if (unlikely(pmd_thp_or_huge(*pmd))) {
 		ptl = &current->mm->page_table_lock;
 		spin_lock(ptl);
 		if (unlikely(!pmd_thp_or_huge(*pmd)
-			|| pmd_hugewillfault(*pmd)
-			|| pmd_trans_splitting(*pmd))) {
+			|| pmd_hugewillfault(*pmd))) {
 			spin_unlock(ptl);
 			return 0;
 		}
@@ -88,6 +87,7 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 static unsigned long noinline
 __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 {
+	unsigned long ua_flags;
 	int atomic;
 
 	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
@@ -118,7 +118,9 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 		if (tocopy > n)
 			tocopy = n;
 
+		ua_flags = uaccess_save_and_enable();
 		memcpy((void *)to, from, tocopy);
+		uaccess_restore(ua_flags);
 		to += tocopy;
 		from += tocopy;
 		n -= tocopy;
@@ -136,7 +138,7 @@ out:
 }
 
 unsigned long
-__copy_to_user(void __user *to, const void *from, unsigned long n)
+arm_copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	/*
 	 * This test is stubbed out of the main function above to keep
@@ -145,14 +147,21 @@ __copy_to_user(void __user *to, const void *from, unsigned long n)
 	 * With frame pointer disabled, tail call optimization kicks in
 	 * as well making this test almost invisible.
 	 */
-	if (n < 64)
-		return __copy_to_user_std(to, from, n);
-	return __copy_to_user_memcpy(to, from, n);
+	if (n < 64) {
+		unsigned long ua_flags = uaccess_save_and_enable();
+		n = __copy_to_user_std(to, from, n);
+		uaccess_restore(ua_flags);
+	} else {
+		n = __copy_to_user_memcpy(to, from, n);
+	}
+	return n;
 }
 	
 static unsigned long noinline
 __clear_user_memset(void __user *addr, unsigned long n)
 {
+	unsigned long ua_flags;
+
 	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
 		memset((void *)addr, 0, n);
 		return 0;
@@ -175,7 +184,9 @@ __clear_user_memset(void __user *addr, unsigned long n)
 		if (tocopy > n)
 			tocopy = n;
 
+		ua_flags = uaccess_save_and_enable();
 		memset((void *)addr, 0, tocopy);
+		uaccess_restore(ua_flags);
 		addr += tocopy;
 		n -= tocopy;
 
@@ -190,12 +201,17 @@ out:
 	return n;
 }
 
-unsigned long __clear_user(void __user *addr, unsigned long n)
+unsigned long arm_clear_user(void __user *addr, unsigned long n)
 {
 	/* See rational for this in __copy_to_user() above. */
-	if (n < 64)
-		return __clear_user_std(addr, n);
-	return __clear_user_memset(addr, n);
+	if (n < 64) {
+		unsigned long ua_flags = uaccess_save_and_enable();
+		n = __clear_user_std(addr, n);
+		uaccess_restore(ua_flags);
+	} else {
+		n = __clear_user_memset(addr, n);
+	}
+	return n;
 }
 
 #if 0
diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig
index 2c44b9305..b41838a58 100644
--- a/arch/arm/mach-alpine/Kconfig
+++ b/arch/arm/mach-alpine/Kconfig
@@ -1,5 +1,7 @@
 config ARCH_ALPINE
-	bool "Annapurna Labs Alpine platform" if ARCH_MULTI_V7
+	bool "Annapurna Labs Alpine platform"
+	depends on ARCH_MULTI_V7
+	select ALPINE_MSI
 	select ARM_AMBA
 	select ARM_GIC
 	select GENERIC_IRQ_CHIP
diff --git a/arch/arm/mach-alpine/platsmp.c b/arch/arm/mach-alpine/platsmp.c
index f78429f48..dd77ea25e 100644
--- a/arch/arm/mach-alpine/platsmp.c
+++ b/arch/arm/mach-alpine/platsmp.c
@@ -42,7 +42,7 @@ static void __init alpine_smp_prepare_cpus(unsigned int max_cpus)
 	alpine_cpu_pm_init();
 }
 
-static struct smp_operations alpine_smp_ops __initdata = {
+static const struct smp_operations alpine_smp_ops __initconst = {
 	.smp_prepare_cpus	= alpine_smp_prepare_cpus,
 	.smp_boot_secondary	= alpine_boot_secondary,
 };
diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig
new file mode 100644
index 000000000..6cbe5a2ea
--- /dev/null
+++ b/arch/arm/mach-artpec/Kconfig
@@ -0,0 +1,20 @@
+menuconfig ARCH_ARTPEC
+	bool "Axis Communications ARM based ARTPEC SoCs"
+	depends on ARCH_MULTI_V7
+
+if ARCH_ARTPEC
+
+config MACH_ARTPEC6
+	bool "Axis ARTPEC-6 ARM Cortex A9 Platform"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	help
+	  Support for Axis ARTPEC-6 ARM Cortex A9 Platform
+
+endif
diff --git a/arch/arm/mach-artpec/Makefile b/arch/arm/mach-artpec/Makefile
new file mode 100644
index 000000000..78325f0c8
--- /dev/null
+++ b/arch/arm/mach-artpec/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MACH_ARTPEC6)		:= board-artpec6.o
diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c
new file mode 100644
index 000000000..a0b1979c2
--- /dev/null
+++ b/arch/arm/mach-artpec/board-artpec6.c
@@ -0,0 +1,69 @@
+/*
+ * ARTPEC-6 device support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/smp.h>
+#include <asm/smp_scu.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/psci.h>
+#include <linux/arm-smccc.h>
+
+
+#define ARTPEC6_DMACFG_REGNUM 0x10
+#define ARTPEC6_DMACFG_UARTS_BURST 0xff
+
+#define SECURE_OP_L2C_WRITEREG 0xb4000001
+
+static void __init artpec6_init_machine(void)
+{
+	struct regmap *regmap;
+
+	regmap = syscon_regmap_lookup_by_compatible("axis,artpec6-syscon");
+
+	if (!IS_ERR(regmap)) {
+		/* Use PL011 DMA Burst Request signal instead of DMA
+		 *  Single Request
+		 */
+		regmap_write(regmap, ARTPEC6_DMACFG_REGNUM,
+			     ARTPEC6_DMACFG_UARTS_BURST);
+	};
+}
+
+static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(SECURE_OP_L2C_WRITEREG, reg, val, 0,
+		      0, 0, 0, 0, &res);
+
+	WARN_ON(res.a0);
+}
+
+static const char * const artpec6_dt_match[] = {
+	"axis,artpec6",
+	NULL
+};
+
+DT_MACHINE_START(ARTPEC6, "Axis ARTPEC-6 Platform")
+	.l2c_aux_val	= 0x0C000000,
+	.l2c_aux_mask	= 0xF3FFFFFF,
+	.l2c_write_sec  = artpec6_l2c310_write_sec,
+	.init_machine	= artpec6_init_machine,
+	.dt_compat	= artpec6_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
new file mode 100644
index 000000000..5225fbcb2
--- /dev/null
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -0,0 +1,30 @@
+menuconfig ARCH_ASPEED
+	bool "Aspeed BMC architectures"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
+	select SRAM
+	select WATCHDOG
+	select ASPEED_WATCHDOG
+	select MOXART_TIMER
+	help
+	  Say Y here if you want to run your kernel on an ASpeed BMC SoC.
+
+if ARCH_ASPEED
+
+config MACH_ASPEED_G4
+	bool "Aspeed SoC 4th Generation"
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+	help
+	 Say yes if you intend to run on an Aspeed ast2400 or similar
+	 fourth generation BMCs, such as those used by OpenPower Power8
+	 systems.
+
+config MACH_ASPEED_G5
+	bool "Aspeed SoC 5th Generation"
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+	help
+	 Say yes if you intend to run on an Aspeed ast2500 or similar
+	 fifth generation Aspeed BMCs.
+
+endif
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index fd95f3494..5204395ef 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,26 +1,42 @@
 menuconfig ARCH_AT91
 	bool "Atmel SoCs"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_AT91
+	select GPIOLIB
 	select PINCTRL
-	select PINCTRL_AT91
 	select SOC_BUS
 
 if ARCH_AT91
+config SOC_SAMA5D2
+	bool "SAMA5D2 family"
+	depends on ARCH_MULTI_V7
+	select SOC_SAMA5
+	select CACHE_L2X0
+	select HAVE_FB_ATMEL
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_H32MX
+	select HAVE_AT91_GENERATED_CLK
+	select PINCTRL_AT91PIO4
+	help
+	  Select this if ou are using one of Atmel's SAMA5D2 family SoC.
+
 config SOC_SAMA5D3
-	bool "SAMA5D3 family" if ARCH_MULTI_V7
+	bool "SAMA5D3 family"
+	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_UTMI
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
+	select PINCTRL_AT91
 	help
 	  Select this if you are using one of Atmel's SAMA5D3 family SoC.
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
 
 config SOC_SAMA5D4
-	bool "SAMA5D4 family" if ARCH_MULTI_V7
+	bool "SAMA5D4 family"
+	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select CACHE_L2X0
 	select HAVE_FB_ATMEL
@@ -28,23 +44,27 @@ config SOC_SAMA5D4
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_H32MX
+	select PINCTRL_AT91
 	help
 	  Select this if you are using one of Atmel's SAMA5D4 family SoC.
 
 config SOC_AT91RM9200
-	bool "AT91RM9200" if ARCH_MULTI_V4T
+	bool "AT91RM9200"
+	depends on ARCH_MULTI_V4T
 	select ATMEL_AIC_IRQ
 	select ATMEL_ST
 	select CPU_ARM920T
 	select HAVE_AT91_USB_CLK
 	select MIGHT_HAVE_PCI
+	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help
 	  Select this if you are using Atmel's AT91RM9200 SoC.
 
 config SOC_AT91SAM9
-	bool "AT91SAM9" if ARCH_MULTI_V5
+	bool "AT91SAM9"
+	depends on ARCH_MULTI_V5
 	select ATMEL_AIC_IRQ
 	select ATMEL_SDRAMC
 	select CPU_ARM926T
@@ -53,6 +73,7 @@ config SOC_AT91SAM9
 	select HAVE_AT91_UTMI
 	select HAVE_FB_ATMEL
 	select MEMORY
+	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help
@@ -83,6 +104,7 @@ config HAVE_AT91_USB_CLK
 config COMMON_CLK_AT91
 	bool
 	select COMMON_CLK
+	select MFD_SYSCON
 
 config HAVE_AT91_SMD
 	bool
@@ -90,6 +112,9 @@ config HAVE_AT91_SMD
 config HAVE_AT91_H32MX
 	bool
 
+config HAVE_AT91_GENERATED_CLK
+	bool
+
 config SOC_SAM_V4_V5
 	bool
 
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index eaf58f88e..d068ec3cd 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -8,12 +8,10 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/system_misc.h>
 
 #include "generic.h"
 #include "soc.h"
@@ -32,13 +30,12 @@ static void __init at91rm9200_dt_device_init(void)
 	if (soc != NULL)
 		soc_dev = soc_device_to_device(soc);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+	of_platform_default_populate(NULL, NULL, soc_dev);
 
-	arm_pm_idle = at91rm9200_idle;
 	at91rm9200_pm_init();
 }
 
-static const char *at91rm9200_dt_board_compat[] __initconst = {
+static const char *const at91rm9200_dt_board_compat[] __initconst = {
 	"atmel,at91rm9200",
 	NULL
 };
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index e47a2093a..ba28e9cc5 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -61,9 +61,7 @@ static void __init at91sam9_common_init(void)
 	if (soc != NULL)
 		soc_dev = soc_device_to_device(soc);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
-
-	arm_pm_idle = at91sam9_idle;
+	of_platform_default_populate(NULL, NULL, soc_dev);
 }
 
 static void __init at91sam9_dt_device_init(void)
@@ -72,7 +70,7 @@ static void __init at91sam9_dt_device_init(void)
 	at91sam9260_pm_init();
 }
 
-static const char *at91_dt_board_compat[] __initconst = {
+static const char *const at91_dt_board_compat[] __initconst = {
 	"atmel,at91sam9",
 	NULL
 };
@@ -89,7 +87,7 @@ static void __init at91sam9g45_dt_device_init(void)
 	at91sam9g45_pm_init();
 }
 
-static const char *at91sam9g45_board_compat[] __initconst = {
+static const char *const at91sam9g45_board_compat[] __initconst = {
 	"atmel,at91sam9g45",
 	NULL
 };
@@ -106,7 +104,7 @@ static void __init at91sam9x5_dt_device_init(void)
 	at91sam9x5_pm_init();
 }
 
-static const char *at91sam9x5_board_compat[] __initconst = {
+static const char *const at91sam9x5_board_compat[] __initconst = {
 	"atmel,at91sam9x5",
 	"atmel,at91sam9n12",
 	NULL
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b0fa7dc72..28ca57a20 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -11,27 +11,18 @@
 #ifndef _AT91_GENERIC_H
 #define _AT91_GENERIC_H
 
-#include <linux/of.h>
-#include <linux/reboot.h>
-
- /* Map io */
-extern void __init at91_map_io(void);
-extern void __init at91_alt_map_io(void);
-
-/* idle */
-extern void at91rm9200_idle(void);
-extern void at91sam9_idle(void);
-
 #ifdef CONFIG_PM
 extern void __init at91rm9200_pm_init(void);
 extern void __init at91sam9260_pm_init(void);
 extern void __init at91sam9g45_pm_init(void);
 extern void __init at91sam9x5_pm_init(void);
+extern void __init sama5_pm_init(void);
 #else
 static inline void __init at91rm9200_pm_init(void) { }
 static inline void __init at91sam9260_pm_init(void) { }
 static inline void __init at91sam9g45_pm_init(void) { }
 static inline void __init at91sam9x5_pm_init(void) { }
+static inline void __init sama5_pm_init(void) { }
 #endif
 
 #endif /* _AT91_GENERIC_H */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e24df77ab..b4332b727 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -22,6 +22,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/atmel.h>
 #include <linux/io.h>
 #include <linux/clk/at91_pmc.h>
 
@@ -31,18 +32,23 @@
 #include <asm/mach/irq.h>
 #include <asm/fncpy.h>
 #include <asm/cacheflush.h>
+#include <asm/system_misc.h>
 
 #include "generic.h"
 #include "pm.h"
 
+static void __iomem *pmc;
+
 /*
  * FIXME: this is needed to communicate between the pinctrl driver and
  * the PM implementation in the machine. Possibly part of the PM
  * implementation should be moved down into the pinctrl driver and get
  * called as part of the generic suspend/resume path.
  */
+#ifdef CONFIG_PINCTRL_AT91
 extern void at91_pinctrl_gpio_suspend(void);
 extern void at91_pinctrl_gpio_resume(void);
+#endif
 
 static struct {
 	unsigned long uhp_udp_mask;
@@ -85,7 +91,7 @@ static int at91_pm_verify_clocks(void)
 	unsigned long scsr;
 	int i;
 
-	scsr = at91_pmc_read(AT91_PMC_SCSR);
+	scsr = readl(pmc + AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
 	if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
@@ -99,8 +105,7 @@ static int at91_pm_verify_clocks(void)
 
 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
 			continue;
-
-		css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		css = readl(pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
 		if (css != AT91_PMC_CSS_SLOW) {
 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
 			return 0;
@@ -143,16 +148,17 @@ static void at91_pm_suspend(suspend_state_t state)
 	flush_cache_all();
 	outer_disable();
 
-	at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
-				at91_ramc_base[1], pm_data);
+	at91_suspend_sram_fn(pmc, at91_ramc_base[0],
+			     at91_ramc_base[1], pm_data);
 
 	outer_resume();
 }
 
 static int at91_pm_enter(suspend_state_t state)
 {
+#ifdef CONFIG_PINCTRL_AT91
 	at91_pinctrl_gpio_suspend();
-
+#endif
 	switch (state) {
 	/*
 	 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
@@ -192,7 +198,9 @@ static int at91_pm_enter(suspend_state_t state)
 error:
 	target_state = PM_SUSPEND_ON;
 
+#ifdef CONFIG_PINCTRL_AT91
 	at91_pinctrl_gpio_resume();
+#endif
 	return 0;
 }
 
@@ -311,7 +319,7 @@ static void at91sam9_sdram_standby(void)
 		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
-static const struct of_device_id ramc_ids[] __initconst = {
+static const struct of_device_id const ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
@@ -348,6 +356,21 @@ static __init void at91_dt_ramc(void)
 	at91_pm_set_standby(standby);
 }
 
+static void at91rm9200_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+}
+
+static void at91sam9_idle(void)
+{
+	writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+	cpu_do_idle();
+}
+
 static void __init at91_pm_sram_init(void)
 {
 	struct gen_pool *sram_pool;
@@ -369,7 +392,7 @@ static void __init at91_pm_sram_init(void)
 		return;
 	}
 
-	sram_pool = gen_pool_get(&pdev->dev);
+	sram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
 		return;
@@ -394,13 +417,36 @@ static void __init at91_pm_sram_init(void)
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
 }
 
-static void __init at91_pm_init(void)
+static const struct of_device_id atmel_pmc_ids[] __initconst = {
+	{ .compatible = "atmel,at91rm9200-pmc"  },
+	{ .compatible = "atmel,at91sam9260-pmc" },
+	{ .compatible = "atmel,at91sam9g45-pmc" },
+	{ .compatible = "atmel,at91sam9n12-pmc" },
+	{ .compatible = "atmel,at91sam9x5-pmc" },
+	{ .compatible = "atmel,sama5d3-pmc" },
+	{ .compatible = "atmel,sama5d2-pmc" },
+	{ /* sentinel */ },
+};
+
+static void __init at91_pm_init(void (*pm_idle)(void))
 {
-	at91_pm_sram_init();
+	struct device_node *pmc_np;
 
 	if (at91_cpuidle_device.dev.platform_data)
 		platform_device_register(&at91_cpuidle_device);
 
+	pmc_np = of_find_matching_node(NULL, atmel_pmc_ids);
+	pmc = of_iomap(pmc_np, 0);
+	if (!pmc) {
+		pr_err("AT91: PM not supported, PMC not found\n");
+		return;
+	}
+
+	if (pm_idle)
+		arm_pm_idle = pm_idle;
+
+	at91_pm_sram_init();
+
 	if (at91_suspend_sram_fn)
 		suspend_set_ops(&at91_pm_ops);
 	else
@@ -419,7 +465,7 @@ void __init at91rm9200_pm_init(void)
 	at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_MC;
 
-	at91_pm_init();
+	at91_pm_init(at91rm9200_idle);
 }
 
 void __init at91sam9260_pm_init(void)
@@ -427,7 +473,7 @@ void __init at91sam9260_pm_init(void)
 	at91_dt_ramc();
 	at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
 	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
-	return at91_pm_init();
+	at91_pm_init(at91sam9_idle);
 }
 
 void __init at91sam9g45_pm_init(void)
@@ -435,7 +481,7 @@ void __init at91sam9g45_pm_init(void)
 	at91_dt_ramc();
 	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
-	return at91_pm_init();
+	at91_pm_init(at91sam9_idle);
 }
 
 void __init at91sam9x5_pm_init(void)
@@ -443,5 +489,13 @@ void __init at91sam9x5_pm_init(void)
 	at91_dt_ramc();
 	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
-	return at91_pm_init();
+	at91_pm_init(at91sam9_idle);
+}
+
+void __init sama5_pm_init(void)
+{
+	at91_dt_ramc();
+	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+	at91_pm_init(NULL);
 }
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 0d95f488b..a25defda3 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -80,6 +80,8 @@ tmp2	.req	r5
  *	@r2: base address of second SDRAM Controller or 0 if not present
  *	@r3: pm information
  */
+/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
+	.align 3
 ENTRY(at91_pm_suspend_in_sram)
 	/* Save registers on stack */
 	stmfd	sp!, {r4 - r12, lr}
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index 41d829d8e..b272c45b4 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -18,6 +18,26 @@
 #include "soc.h"
 
 static const struct at91_soc sama5_socs[] = {
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
+		 "sama5d21", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
+		 "sama5d22", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
+		 "sama5d23", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
+		 "sama5d24", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
+		 "sama5d24", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
+		 "sama5d26", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
+		 "sama5d27", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
+		 "sama5d27", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
+		 "sama5d28", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
+		 "sama5d28", "sama5d2"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
 		 "sama5d31", "sama5d3"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
@@ -48,11 +68,11 @@ static void __init sama5_dt_device_init(void)
 	if (soc != NULL)
 		soc_dev = soc_device_to_device(soc);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
-	at91sam9x5_pm_init();
+	of_platform_default_populate(NULL, NULL, soc_dev);
+	sama5_pm_init();
 }
 
-static const char *sama5_dt_board_compat[] __initconst = {
+static const char *const sama5_dt_board_compat[] __initconst = {
 	"atmel,sama5",
 	NULL
 };
@@ -63,7 +83,8 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
 	.dt_compat	= sama5_dt_board_compat,
 MACHINE_END
 
-static const char *sama5_alt_dt_board_compat[] __initconst = {
+static const char *const sama5_alt_dt_board_compat[] __initconst = {
+	"atmel,sama5d2",
 	"atmel,sama5d4",
 	NULL
 };
diff --git a/arch/arm/mach-at91/soc.c b/arch/arm/mach-at91/soc.c
index 54343ffa3..c6fda75dd 100644
--- a/arch/arm/mach-at91/soc.c
+++ b/arch/arm/mach-at91/soc.c
@@ -22,48 +22,93 @@
 #include "soc.h"
 
 #define AT91_DBGU_CIDR			0x40
-#define AT91_DBGU_CIDR_VERSION(x)	((x) & 0x1f)
-#define AT91_DBGU_CIDR_EXT		BIT(31)
-#define AT91_DBGU_CIDR_MATCH_MASK	0x7fffffe0
 #define AT91_DBGU_EXID			0x44
+#define AT91_CHIPID_CIDR		0x00
+#define AT91_CHIPID_EXID		0x04
+#define AT91_CIDR_VERSION(x)		((x) & 0x1f)
+#define AT91_CIDR_EXT			BIT(31)
+#define AT91_CIDR_MATCH_MASK		0x7fffffe0
 
-struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+static int __init at91_get_cidr_exid_from_dbgu(u32 *cidr, u32 *exid)
 {
-	struct soc_device_attribute *soc_dev_attr;
-	const struct at91_soc *soc;
-	struct soc_device *soc_dev;
 	struct device_node *np;
 	void __iomem *regs;
-	u32 cidr, exid;
 
 	np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
 	if (!np)
 		np = of_find_compatible_node(NULL, NULL,
 					     "atmel,at91sam9260-dbgu");
+	if (!np)
+		return -ENODEV;
 
-	if (!np) {
-		pr_warn("Could not find DBGU node");
-		return NULL;
+	regs = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!regs) {
+		pr_warn("Could not map DBGU iomem range");
+		return -ENXIO;
 	}
 
+	*cidr = readl(regs + AT91_DBGU_CIDR);
+	*exid = readl(regs + AT91_DBGU_EXID);
+
+	iounmap(regs);
+
+	return 0;
+}
+
+static int __init at91_get_cidr_exid_from_chipid(u32 *cidr, u32 *exid)
+{
+	struct device_node *np;
+	void __iomem *regs;
+
+	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-chipid");
+	if (!np)
+		return -ENODEV;
+
 	regs = of_iomap(np, 0);
 	of_node_put(np);
 
 	if (!regs) {
 		pr_warn("Could not map DBGU iomem range");
-		return NULL;
+		return -ENXIO;
 	}
 
-	cidr = readl(regs + AT91_DBGU_CIDR);
-	exid = readl(regs + AT91_DBGU_EXID);
+	*cidr = readl(regs + AT91_CHIPID_CIDR);
+	*exid = readl(regs + AT91_CHIPID_EXID);
 
 	iounmap(regs);
 
+	return 0;
+}
+
+struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	const struct at91_soc *soc;
+	struct soc_device *soc_dev;
+	u32 cidr, exid;
+	int ret;
+
+	/*
+	 * With SAMA5D2 and later SoCs, CIDR and EXID registers are no more
+	 * in the dbgu device but in the chipid device whose purpose is only
+	 * to expose these two registers.
+	 */
+	ret = at91_get_cidr_exid_from_dbgu(&cidr, &exid);
+	if (ret)
+		ret = at91_get_cidr_exid_from_chipid(&cidr, &exid);
+	if (ret) {
+		if (ret == -ENODEV)
+			pr_warn("Could not find identification node");
+		return NULL;
+	}
+
 	for (soc = socs; soc->name; soc++) {
-		if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
+		if (soc->cidr_match != (cidr & AT91_CIDR_MATCH_MASK))
 			continue;
 
-		if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
+		if (!(cidr & AT91_CIDR_EXT) || soc->exid_match == exid)
 			break;
 	}
 
@@ -79,7 +124,7 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
 	soc_dev_attr->family = soc->family;
 	soc_dev_attr->soc_id = soc->name;
 	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
-					   AT91_DBGU_CIDR_VERSION(cidr));
+					   AT91_CIDR_VERSION(cidr));
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr->revision);
@@ -91,7 +136,7 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
 	if (soc->family)
 		pr_info("Detected SoC family: %s\n", soc->family);
 	pr_info("Detected SoC: %s, revision %X\n", soc->name,
-		AT91_DBGU_CIDR_VERSION(cidr));
+		AT91_CIDR_VERSION(cidr));
 
 	return soc_dev;
 }
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index be23c4005..228efded5 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -62,6 +62,19 @@ at91_soc_init(const struct at91_soc *socs);
 #define AT91SAM9XE256_CIDR_MATCH	0x329a93a0
 #define AT91SAM9XE512_CIDR_MATCH	0x329aa3a0
 
+#define SAMA5D2_CIDR_MATCH		0x0a5c08c0
+#define SAMA5D21CU_EXID_MATCH		0x0000005a
+#define SAMA5D22CU_EXID_MATCH		0x00000059
+#define SAMA5D22CN_EXID_MATCH		0x00000069
+#define SAMA5D23CU_EXID_MATCH		0x00000058
+#define SAMA5D24CX_EXID_MATCH		0x00000004
+#define SAMA5D24CU_EXID_MATCH		0x00000014
+#define SAMA5D26CU_EXID_MATCH		0x00000012
+#define SAMA5D27CU_EXID_MATCH		0x00000011
+#define SAMA5D27CN_EXID_MATCH		0x00000021
+#define SAMA5D28CU_EXID_MATCH		0x00000010
+#define SAMA5D28CN_EXID_MATCH		0x00000020
+
 #define SAMA5D3_CIDR_MATCH		0x0a5c07c0
 #define SAMA5D31_EXID_MATCH		0x00444300
 #define SAMA5D33_EXID_MATCH		0x00414300
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index 8be7e0ae1..6c6d5e765 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_AXXIA
-	bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE)
+	bool "LSI Axxia platforms"
+	depends on ARCH_MULTI_V7 && ARM_LPAE
 	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_AMBA
 	select ARM_GIC
diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c
index 959d4df3d..ffbd71d45 100644
--- a/arch/arm/mach-axxia/platsmp.c
+++ b/arch/arm/mach-axxia/platsmp.c
@@ -82,7 +82,7 @@ static void __init axxia_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-static struct smp_operations axxia_smp_ops __initdata = {
+static const struct smp_operations axxia_smp_ops __initconst = {
 	.smp_prepare_cpus	= axxia_smp_prepare_cpus,
 	.smp_boot_secondary	= axxia_boot_secondary,
 };
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 0ac9e4b3b..34f0fca0b 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_BCM
-	bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
+	bool "Broadcom SoC Support"
+	depends on ARCH_MULTI_V6_V7
 	help
 	  This enables support for Broadcom ARM based SoC chips
 
@@ -14,9 +15,9 @@ config ARCH_BCM_IPROC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ARM_GLOBAL_TIMER
-
+	select COMMON_CLK_IPROC
 	select CLKSRC_MMIO
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
 	help
@@ -27,7 +28,8 @@ config ARCH_BCM_IPROC
 	  Currently supported SoCs are Cygnus.
 
 config ARCH_BCM_CYGNUS
-	bool "Broadcom Cygnus Support" if ARCH_MULTI_V7
+	bool "Broadcom Cygnus Support"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_IPROC
 	help
 	  Enable support for the Cygnus family,
@@ -35,9 +37,32 @@ config ARCH_BCM_CYGNUS
 	  BCM11300, BCM11320, BCM11350, BCM11360,
 	  BCM58300, BCM58302, BCM58303, BCM58305.
 
+config ARCH_BCM_NSP
+	bool "Broadcom Northstar Plus SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARCH_BCM_IPROC
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
+	select ARM_ERRATA_764369 if SMP
+	select HAVE_SMP
+	help
+	  Support for Broadcom Northstar Plus SoC.
+	  Broadcom Northstar Plus family of SoCs are used for switching control
+	  and management applications as well as residential router/gateway
+	  applications. The SoC features dual core Cortex A9 ARM CPUs,
+	  integrating several peripheral interfaces including multiple Gigabit
+	  Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and
+	  NAND flash, SATA and several other IO controllers.
+
 config ARCH_BCM_5301X
-	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+	bool "Broadcom BCM470X / BCM5301X ARM SoC"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_IPROC
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
+	select ARM_ERRATA_764369 if SMP
+	select HAVE_SMP
+
 	help
 	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
 
@@ -55,7 +80,7 @@ comment "KONA architected SoCs"
 
 config ARCH_BCM_MOBILE
 	bool
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_GIC
@@ -64,11 +89,13 @@ config ARCH_BCM_MOBILE
 	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL
 	select ARCH_BCM_MOBILE_SMP if SMP
+	select BCM_KONA_TIMER
 	help
 	  This enables support for systems based on Broadcom mobile SoCs.
 
 config ARCH_BCM_281XX
-	bool "Broadcom BCM281XX SoC family" if ARCH_MULTI_V7
+	bool "Broadcom BCM281XX SoC family"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help
@@ -77,16 +104,25 @@ config ARCH_BCM_281XX
 	  variants.
 
 config ARCH_BCM_21664
-	bool "Broadcom BCM21664 SoC family" if ARCH_MULTI_V7
+	bool "Broadcom BCM21664 SoC family"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help
 	  Enable support for the BCM21664 family, which includes
 	  BCM21663 and BCM21664 variants.
 
+config ARCH_BCM_23550
+	bool "Broadcom BCM23550 SoC"
+	depends on ARCH_MULTI_V7
+	select ARCH_BCM_MOBILE
+	select HAVE_SMP
+	help
+	  Enable support for the BCM23550.
+
 config ARCH_BCM_MOBILE_L2_CACHE
 	bool "Broadcom mobile SoC level 2 cache support"
-	depends on ARCH_BCM_MOBILE
+	depends on ARCH_BCM_281XX || ARCH_BCM_21664
 	default y
 	select CACHE_L2X0
 	select ARCH_BCM_MOBILE_SMC
@@ -101,27 +137,31 @@ config ARCH_BCM_MOBILE_SMP
 	select HAVE_ARM_SCU
 	select ARM_ERRATA_764369
 	help
-	  SMP support for the BCM281XX and BCM21664 SoC families.
+	  SMP support for the BCM281XX, BCM21664 and BCM23550 SoC families.
 	  Provided as an option so SMP support for SoCs of this type
 	  can be disabled for an SMP-enabled kernel.
 
 comment "Other Architectures"
 
 config ARCH_BCM2835
-	bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
-	select ARCH_REQUIRE_GPIOLIB
+	bool "Broadcom BCM2835 family"
+	depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
+	select GPIOLIB
 	select ARM_AMBA
-	select ARM_ERRATA_411920
+	select ARM_ERRATA_411920 if ARCH_MULTI_V6
 	select ARM_TIMER_SP804
+	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select CLKSRC_OF
+	select BCM2835_TIMER
 	select PINCTRL
 	select PINCTRL_BCM2835
 	help
-	  This enables support for the Broadcom BCM2835 SoC. This SoC is
-	  used in the Raspberry Pi and Roku 2 devices.
+	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
+	  This SoC is used in the Raspberry Pi and Roku 2 devices.
 
 config ARCH_BCM_63XX
-	bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
+	bool "Broadcom BCM63xx DSL SoC"
+	depends on ARCH_MULTI_V7
 	depends on MMU
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
@@ -138,13 +178,16 @@ config ARCH_BCM_63XX
 	  the BCM63138 variant.
 
 config ARCH_BRCMSTB
-	bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
+	bool "Broadcom BCM7XXX based boards"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
+	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
-	select BRCMSTB_GISB_ARB
 	select BRCMSTB_L2_IRQ
 	select BCM7120_L2_IRQ
-	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
+	select SOC_BRCMSTB
+	select SOC_BUS
 	help
 	  Say Y if you intend to run the kernel on a Broadcom ARM-based STB
 	  chipset.
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 4fb0da458..980f58500 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2012-2014 Broadcom Corporation
+# Copyright (C) 2012-2015 Broadcom Corporation
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -13,14 +13,24 @@
 # Cygnus
 obj-$(CONFIG_ARCH_BCM_CYGNUS) +=  bcm_cygnus.o
 
+# Northstar Plus
+obj-$(CONFIG_ARCH_BCM_NSP)	+= bcm_nsp.o
+
+ifeq ($(CONFIG_ARCH_BCM_NSP),y)
+obj-$(CONFIG_SMP)		+= platsmp.o
+endif
+
 # BCM281XX
 obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bcm281xx.o
 
 # BCM21664
 obj-$(CONFIG_ARCH_BCM_21664)	+= board_bcm21664.o
 
-# BCM281XX and BCM21664 SMP support
-obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
+# BCM23550
+obj-$(CONFIG_ARCH_BCM_23550)	+= board_bcm23550.o
+
+# BCM281XX, BCM21664 and BCM23550 SMP support
+obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
 
 # BCM281XX and BCM21664 L2 cache control
 obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
@@ -36,13 +46,14 @@ obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 
 # BCM5301X
 obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
+obj-$(CONFIG_SMP)		+= platsmp.o
+endif
 
 # BCM63XXx
 ifeq ($(CONFIG_ARCH_BCM_63XX),y)
-CFLAGS_bcm63xx_headsmp.o	+= -march=armv7-a
 obj-y				+= bcm63xx.o
-obj-$(CONFIG_SMP)		+= bcm63xx_smp.o bcm63xx_headsmp.o \
-				   bcm63xx_pmb.o
+obj-$(CONFIG_SMP)		+= bcm63xx_smp.o bcm63xx_pmb.o
 endif
 
 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
diff --git a/arch/arm/mach-bcm/bcm63xx_headsmp.S b/arch/arm/mach-bcm/bcm63xx_headsmp.S
deleted file mode 100644
index c7af397c7..000000000
--- a/arch/arm/mach-bcm/bcm63xx_headsmp.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  Copyright (C) 2015, Broadcom Corporation
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-
-ENTRY(bcm63138_secondary_startup)
- ARM_BE8(setend	be)
-	/*
-	 * L1 cache does have unpredictable contents at power-up clean its
-	 * contents without flushing
-	 */
-	bl      v7_invalidate_l1
-	nop
-
-	b	secondary_startup
-ENDPROC(bcm63138_secondary_startup)
diff --git a/arch/arm/mach-bcm/bcm63xx_pmb.c b/arch/arm/mach-bcm/bcm63xx_pmb.c
index de061ec5a..41dcf5d65 100644
--- a/arch/arm/mach-bcm/bcm63xx_pmb.c
+++ b/arch/arm/mach-bcm/bcm63xx_pmb.c
@@ -92,7 +92,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn,
 				     unsigned int *cpu,
 				     unsigned int *addr)
 {
-	struct device_node *pmb_dn;
 	struct of_phandle_args args;
 	int ret;
 
@@ -109,7 +108,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn,
 		return ret;
 	}
 
-	pmb_dn = args.np;
 	if (args.args_count != 2) {
 		pr_err("reset-controller does not conform to reset-cells\n");
 		return -EINVAL;
diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c
index b8e18cc8f..9b6727ed6 100644
--- a/arch/arm/mach-bcm/bcm63xx_smp.c
+++ b/arch/arm/mach-bcm/bcm63xx_smp.c
@@ -135,7 +135,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu,
 	}
 
 	/* Write the secondary init routine to the BootLUT reset vector */
-	val = virt_to_phys(bcm63138_secondary_startup);
+	val = virt_to_phys(secondary_startup);
 	writel_relaxed(val, bootlut_base + BOOTLUT_RESET_VECT);
 
 	/* Power up the core, will jump straight to its reset vector when we
@@ -161,7 +161,7 @@ static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-struct smp_operations bcm63138_smp_ops __initdata = {
+static const struct smp_operations bcm63138_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm63138_smp_prepare_cpus,
 	.smp_boot_secondary	= bcm63138_smp_boot_secondary,
 };
diff --git a/arch/arm/mach-bcm/bcm63xx_smp.h b/arch/arm/mach-bcm/bcm63xx_smp.h
index 50b760445..9c6d50e2b 100644
--- a/arch/arm/mach-bcm/bcm63xx_smp.h
+++ b/arch/arm/mach-bcm/bcm63xx_smp.h
@@ -3,7 +3,6 @@
 
 struct device_node;
 
-extern void bcm63138_secondary_startup(void);
 extern int bcm63xx_pmb_power_on_cpu(struct device_node *dn);
 
 #endif /* __BCM63XX_SMP_H */
diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c
index 7aef92720..c8830a2b0 100644
--- a/arch/arm/mach-bcm/bcm_5301x.c
+++ b/arch/arm/mach-bcm/bcm_5301x.c
@@ -9,42 +9,8 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
-#include <asm/siginfo.h>
-#include <asm/signal.h>
 
-
-static bool first_fault = true;
-
-static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
-				 struct pt_regs *regs)
-{
-	if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
-		first_fault = false;
-
-		/*
-		 * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
-		 * for no good reason, possibly left over from the CFE boot
-		 * loader.
-		 */
-		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
-			addr, fsr);
-
-		/* Returning non-zero causes fault display and panic */
-		return 0;
-	}
-
-	/* Others should cause a fault */
-	return 1;
-}
-
-static void __init bcm5301x_init_early(void)
-{
-	/* Install our hook */
-	hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
-			"imprecise external abort");
-}
-
-static const char __initconst *bcm5301x_dt_compat[] = {
+static const char *const bcm5301x_dt_compat[] __initconst = {
 	"brcm,bcm4708",
 	NULL,
 };
@@ -52,6 +18,5 @@ static const char __initconst *bcm5301x_dt_compat[] = {
 DT_MACHINE_START(BCM5301X, "BCM5301X")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
-	.init_early	= bcm5301x_init_early,
 	.dt_compat	= bcm5301x_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index a55a7ecf1..cf3f8658f 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -33,7 +33,7 @@ struct bcm_kona_smc_data {
 	unsigned result;
 };
 
-static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
+static const struct of_device_id const bcm_kona_smc_ids[] __initconst = {
 	{.compatible = "brcm,kona-smc"},
 	{.compatible = "bcm,kona-smc"}, /* deprecated name */
 	{},
diff --git a/arch/arm/mach-bcm/bcm_nsp.c b/arch/arm/mach-bcm/bcm_nsp.c
new file mode 100644
index 000000000..a1101a3d3
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm_nsp.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const bcm_nsp_dt_compat[] __initconst = {
+	"brcm,nsp",
+	NULL,
+};
+
+DT_MACHINE_START(NSP_DT, "Broadcom Northstar Plus SoC")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.dt_compat = bcm_nsp_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c
index 82ad56877..c5bf01641 100644
--- a/arch/arm/mach-bcm/board_bcm21664.c
+++ b/arch/arm/mach-bcm/board_bcm21664.c
@@ -11,56 +11,12 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-
 #include <asm/mach/arch.h>
 
 #include "kona_l2_cache.h"
 
-#define RSTMGR_DT_STRING		"brcm,bcm21664-resetmgr"
-
-#define RSTMGR_REG_WR_ACCESS_OFFSET	0
-#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET	4
-
-#define RSTMGR_WR_PASSWORD		0xa5a5
-#define RSTMGR_WR_PASSWORD_SHIFT	8
-#define RSTMGR_WR_ACCESS_ENABLE		1
-
-static void bcm21664_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *base;
-	struct device_node *resetmgr;
-
-	resetmgr = of_find_compatible_node(NULL, NULL, RSTMGR_DT_STRING);
-	if (!resetmgr) {
-		pr_emerg("Couldn't find " RSTMGR_DT_STRING "\n");
-		return;
-	}
-	base = of_iomap(resetmgr, 0);
-	if (!base) {
-		pr_emerg("Couldn't map " RSTMGR_DT_STRING "\n");
-		return;
-	}
-
-	/*
-	 * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
-	 * register. To write to that register we must first write the password
-	 * and the enable bit in the write access enable register.
-	 */
-	writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
-		RSTMGR_WR_ACCESS_ENABLE,
-		base + RSTMGR_REG_WR_ACCESS_OFFSET);
-	writel(0, base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
-
-	/* Wait for reset */
-	while (1);
-}
-
 static void __init bcm21664_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	kona_l2_cache_init();
 }
 
@@ -71,6 +27,5 @@ static const char * const bcm21664_dt_compat[] = {
 
 DT_MACHINE_START(BCM21664_DT, "BCM21664 Broadcom Application Processor")
 	.init_machine = bcm21664_init,
-	.restart = bcm21664_restart,
 	.dt_compat = bcm21664_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-bcm/board_bcm23550.c b/arch/arm/mach-bcm/board_bcm23550.c
new file mode 100644
index 000000000..0ac01debd
--- /dev/null
+++ b/arch/arm/mach-bcm/board_bcm23550.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+static const char * const bcm23550_dt_compat[] = {
+	"brcm,bcm23550",
+	NULL,
+};
+
+DT_MACHINE_START(BCM23550_DT, "BCM23550 Broadcom Application Processor")
+	.dt_compat = bcm23550_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 2e367bd7c..b81bb3869 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -13,7 +13,6 @@
 
 #include <linux/clocksource.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
 
@@ -58,7 +57,6 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
 
 static void __init bcm281xx_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	kona_l2_cache_init();
 }
 
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 0f7b9eac3..0c1edfc98 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 #include <linux/clk/bcm2835.h>
 
 #include <asm/mach/arch.h>
@@ -23,20 +22,16 @@
 
 static void __init bcm2835_init(void)
 {
-	int ret;
-
 	bcm2835_init_clocks();
-
-	ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
-				   NULL);
-	if (ret) {
-		pr_err("of_platform_populate failed: %d\n", ret);
-		BUG();
-	}
 }
 
 static const char * const bcm2835_compat[] = {
+#ifdef CONFIG_ARCH_MULTI_V6
 	"brcm,bcm2835",
+#endif
+#ifdef CONFIG_ARCH_MULTI_V7
+	"brcm,bcm2836",
+#endif
 	NULL
 };
 
diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
index 3a60f7ee3..99a67cfb7 100644
--- a/arch/arm/mach-bcm/brcmstb.c
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -12,11 +12,19 @@
  */
 
 #include <linux/init.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
+#include <linux/soc/brcmstb/brcmstb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+static void __init brcmstb_init_irq(void)
+{
+	irqchip_init();
+	brcmstb_biuctrl_init();
+}
+
 static const char *const brcmstb_match[] __initconst = {
 	"brcm,bcm7445",
 	"brcm,brcmstb",
@@ -25,4 +33,5 @@ static const char *const brcmstb_match[] __initconst = {
 
 DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
 	.dt_compat	= brcmstb_match,
+	.init_irq	= brcmstb_init_irq,
 MACHINE_END
diff --git a/arch/arm/mach-bcm/kona_l2_cache.c b/arch/arm/mach-bcm/kona_l2_cache.c
index b31970377..59ad86304 100644
--- a/arch/arm/mach-bcm/kona_l2_cache.c
+++ b/arch/arm/mach-bcm/kona_l2_cache.c
@@ -17,6 +17,7 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include "bcm_kona_smc.h"
+#include "kona_l2_cache.h"
 
 void __init kona_l2_cache_init(void)
 {
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
index 44d6bddf7..40dc84484 100644
--- a/arch/arm/mach-bcm/platsmp-brcmstb.c
+++ b/arch/arm/mach-bcm/platsmp-brcmstb.c
@@ -356,7 +356,7 @@ static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-static struct smp_operations brcmstb_smp_ops __initdata = {
+static const struct smp_operations brcmstb_smp_ops __initconst = {
 	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup,
 	.smp_boot_secondary	= brcmstb_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/platsmp.c
index 66a046552..3ac3a9bc6 100644
--- a/arch/arm/mach-bcm/kona_smp.c
+++ b/arch/arm/mach-bcm/platsmp.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Broadcom Corporation
+ * Copyright (C) 2014-2015 Broadcom Corporation
  * Copyright 2014 Linaro Limited
  *
  * This program is free software; you can redistribute it and/or
@@ -12,12 +12,18 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
+#include <linux/init.h>
 #include <linux/io.h>
+#include <linux/jiffies.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/sched.h>
+#include <linux/smp.h>
 
+#include <asm/cacheflush.h>
 #include <asm/smp.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
@@ -30,9 +36,7 @@
 
 /* Name of device node property defining secondary boot register location */
 #define OF_SECONDARY_BOOT	"secondary-boot-reg"
-
-/* I/O address of register used to coordinate secondary core startup */
-static u32	secondary_boot;
+#define MPIDR_CPUID_BITMASK	0x3
 
 /*
  * Enable the Cortex A9 Snoop Control Unit
@@ -75,48 +79,64 @@ static int __init scu_a9_enable(void)
 	return 0;
 }
 
-static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
+static u32 secondary_boot_addr_for(unsigned int cpu)
 {
-	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-	struct device_node *node;
-	int ret;
+	u32 secondary_boot_addr = 0;
+	struct device_node *cpu_node = of_get_cpu_node(cpu, NULL);
 
-	BUG_ON(secondary_boot);		/* We're called only once */
+        if (!cpu_node) {
+		pr_err("Failed to find device tree node for CPU%u\n", cpu);
+		return 0;
+	}
 
-	/*
-	 * This function is only called via smp_ops->smp_prepare_cpu().
-	 * That only happens if a "/cpus" device tree node exists
-	 * and has an "enable-method" property that selects the SMP
-	 * operations defined herein.
-	 */
-	node = of_find_node_by_path("/cpus");
-	BUG_ON(!node);
+	if (of_property_read_u32(cpu_node,
+				 OF_SECONDARY_BOOT,
+				 &secondary_boot_addr))
+		pr_err("required secondary boot register not specified for CPU%u\n",
+			cpu);
 
-	/*
-	 * Our secondary enable method requires a "secondary-boot-reg"
-	 * property to specify a register address used to request the
-	 * ROM code boot a secondary code.  If we have any trouble
-	 * getting this we fall back to uniprocessor mode.
-	 */
-	if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
-		pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
-			node->name);
-		ret = -ENOENT;		/* Arrange to disable SMP */
-		goto out;
+	of_node_put(cpu_node);
+
+	return secondary_boot_addr;
+}
+
+static int nsp_write_lut(unsigned int cpu)
+{
+	void __iomem *sku_rom_lut;
+	phys_addr_t secondary_startup_phy;
+	const u32 secondary_boot_addr = secondary_boot_addr_for(cpu);
+
+	if (!secondary_boot_addr)
+		return -EINVAL;
+
+	sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr,
+				      sizeof(phys_addr_t));
+	if (!sku_rom_lut) {
+		pr_warn("unable to ioremap SKU-ROM LUT register for cpu %u\n", cpu);
+		return -ENOMEM;
 	}
 
-	/*
-	 * Enable the SCU on Cortex A9 based SoCs.  If -ENOENT is
-	 * returned, the SoC reported a uniprocessor configuration.
-	 * We bail on any other error.
-	 */
-	ret = scu_a9_enable();
-out:
-	of_node_put(node);
-	if (ret) {
+	secondary_startup_phy = virt_to_phys(secondary_startup);
+	BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
+
+	writel_relaxed(secondary_startup_phy, sku_rom_lut);
+
+	/* Ensure the write is visible to the secondary core */
+	smp_wmb();
+
+	iounmap(sku_rom_lut);
+
+	return 0;
+}
+
+static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
+{
+	const cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+
+	/* Enable the SCU on Cortex A9 based SoCs */
+	if (scu_a9_enable()) {
 		/* Update the CPU present map to reflect uniprocessor mode */
-		BUG_ON(ret != -ENOENT);
-		pr_warn("disabling SMP\n");
+		pr_warn("failed to enable A9 SCU - disabling SMP\n");
 		init_cpu_present(&only_cpu_0);
 	}
 }
@@ -139,7 +159,7 @@ out:
  * - Wait for the secondary boot register to be re-written, which
  *   indicates the secondary core has started.
  */
-static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	void __iomem *boot_reg;
 	phys_addr_t boot_func;
@@ -147,6 +167,7 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	u32 cpu_id;
 	u32 boot_val;
 	bool timeout = false;
+	const u32 secondary_boot_addr = secondary_boot_addr_for(cpu);
 
 	cpu_id = cpu_logical_map(cpu);
 	if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
@@ -154,15 +175,14 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return -EINVAL;
 	}
 
-	if (!secondary_boot) {
-		pr_err("required secondary boot register not specified\n");
+	if (!secondary_boot_addr)
 		return -EINVAL;
-	}
 
-	boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
+	boot_reg = ioremap_nocache((phys_addr_t)secondary_boot_addr,
+				   sizeof(phys_addr_t));
 	if (!boot_reg) {
 		pr_err("unable to map boot register for cpu %u\n", cpu_id);
-		return -ENOSYS;
+		return -ENOMEM;
 	}
 
 	/*
@@ -191,12 +211,96 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	pr_err("timeout waiting for cpu %u to start\n", cpu_id);
 
-	return -ENOSYS;
+	return -ENXIO;
 }
 
-static struct smp_operations bcm_smp_ops __initdata = {
+/* Cluster Dormant Control command to bring CPU into a running state */
+#define CDC_CMD			6
+#define CDC_CMD_OFFSET		0
+#define CDC_CMD_REG(cpu)	(CDC_CMD_OFFSET + 4*(cpu))
+
+/*
+ * BCM23550 has a Cluster Dormant Control block that keeps the core in
+ * idle state. A command needs to be sent to the block to bring the CPU
+ * into running state.
+ */
+static int bcm23550_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	void __iomem *cdc_base;
+	struct device_node *dn;
+	char *name;
+	int ret;
+
+	/* Make sure a CDC node exists before booting the
+	 * secondary core.
+	 */
+	name = "brcm,bcm23550-cdc";
+	dn = of_find_compatible_node(NULL, NULL, name);
+	if (!dn) {
+		pr_err("unable to find cdc node\n");
+		return -ENODEV;
+	}
+
+	cdc_base = of_iomap(dn, 0);
+	of_node_put(dn);
+
+	if (!cdc_base) {
+		pr_err("unable to remap cdc base register\n");
+		return -ENOMEM;
+	}
+
+	/* Boot the secondary core */
+	ret = kona_boot_secondary(cpu, idle);
+	if (ret)
+		goto out;
+
+	/* Bring this CPU to RUN state so that nIRQ nFIQ
+	 * signals are unblocked.
+	 */
+	writel_relaxed(CDC_CMD, cdc_base + CDC_CMD_REG(cpu));
+
+out:
+	iounmap(cdc_base);
+
+	return ret;
+}
+
+static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int ret;
+
+	/*
+	 * After wake up, secondary core branches to the startup
+	 * address programmed at SKU ROM LUT location.
+	 */
+	ret = nsp_write_lut(cpu);
+	if (ret) {
+		pr_err("unable to write startup addr to SKU ROM LUT\n");
+		goto out;
+	}
+
+	/* Send a CPU wakeup interrupt to the secondary core */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+out:
+	return ret;
+}
+
+static const struct smp_operations kona_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
-	.smp_boot_secondary	= bcm_boot_secondary,
+	.smp_boot_secondary	= kona_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
-			&bcm_smp_ops);
+			&kona_smp_ops);
+
+static const struct smp_operations bcm23550_smp_ops __initconst = {
+	.smp_boot_secondary	= bcm23550_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_bcm23550, "brcm,bcm23550",
+			&bcm23550_smp_ops);
+
+static const struct smp_operations nsp_smp_ops __initconst = {
+	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
+	.smp_boot_secondary	= nsp_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 742d53a5f..63ab1d368 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,11 +1,12 @@
 menuconfig ARCH_BERLIN
-	bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
+	bool "Marvell Berlin SoCs"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select DW_APB_ICTL
 	select DW_APB_TIMER_OF
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MFD_SYSCON
 	select PINCTRL
 
diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c
index 34a3753e7..93f90688d 100644
--- a/arch/arm/mach-berlin/platsmp.c
+++ b/arch/arm/mach-berlin/platsmp.c
@@ -14,10 +14,16 @@
 #include <linux/of_address.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
-#define CPU_RESET		0x00
+/*
+ * There are two reset registers, one with self-clearing (SC)
+ * reset and one with non-self-clearing reset (NON_SC).
+ */
+#define CPU_RESET_SC		0x00
+#define CPU_RESET_NON_SC	0x20
 
 #define RESET_VECT		0x00
 #define SW_RESET_ADDR		0x94
@@ -30,9 +36,11 @@ static inline void berlin_perform_reset_cpu(unsigned int cpu)
 {
 	u32 val;
 
-	val = readl(cpu_ctrl + CPU_RESET);
+	val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+	val &= ~BIT(cpu_logical_map(cpu));
+	writel(val, cpu_ctrl + CPU_RESET_NON_SC);
 	val |= BIT(cpu_logical_map(cpu));
-	writel(val, cpu_ctrl + CPU_RESET);
+	writel(val, cpu_ctrl + CPU_RESET_NON_SC);
 }
 
 static int berlin_boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -91,8 +99,32 @@ unmap_scu:
 	iounmap(scu_base);
 }
 
-static struct smp_operations berlin_smp_ops __initdata = {
+#ifdef CONFIG_HOTPLUG_CPU
+static void berlin_cpu_die(unsigned int cpu)
+{
+	v7_exit_coherency_flush(louis);
+	while (1)
+		cpu_do_idle();
+}
+
+static int berlin_cpu_kill(unsigned int cpu)
+{
+	u32 val;
+
+	val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+	val &= ~BIT(cpu_logical_map(cpu));
+	writel(val, cpu_ctrl + CPU_RESET_NON_SC);
+
+	return 1;
+}
+#endif
+
+static const struct smp_operations berlin_smp_ops __initconst = {
 	.smp_prepare_cpus	= berlin_smp_prepare_cpus,
 	.smp_boot_secondary	= berlin_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= berlin_cpu_die,
+	.cpu_kill		= berlin_cpu_kill,
+#endif
 };
 CPU_METHOD_OF_DECLARE(berlin_smp, "marvell,berlin-smp", &berlin_smp_ops);
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index f711498c1..61284b938 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -1,38 +1,15 @@
-if ARCH_CLPS711X
-
-menu "CLPS711X/EP721X/EP731X Implementations"
-
-config ARCH_AUTCPU12
-	bool "AUTCPU12"
-	help
-	  Say Y if you intend to run the kernel on the autronix autcpu12
-	  board. This board is based on a Cirrus Logic CS89712.
-
-config ARCH_CDB89712
-	bool "CDB89712"
-	help
-	  This is an evaluation board from Cirrus for the CS89712 processor.
-	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
-	  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
-
-config ARCH_CLEP7312
-	bool "CLEP7312"
-	help
-	  Boards based on the Cirrus Logic 7212/7312 chips.
-
-config ARCH_EDB7211
-	bool "EDB7211"
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	help
-	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
-	  evaluation board.
-
-config ARCH_P720T
-	bool "P720T"
-	help
-	  Say Y here if you intend to run this kernel on the ARM Prospector
-	  720T.
-
-endmenu
-
-endif
+menuconfig ARCH_CLPS711X
+	bool "Cirrus Logic EP721x/EP731x-based"
+	depends on ARCH_MULTI_V4T
+	select AUTO_ZRELADDR
+	select CLKSRC_OF
+	select CLPS711X_TIMER
+	select COMMON_CLK
+	select CPU_ARM720T
+	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
+	select MFD_SYSCON
+	select OF_IRQ
+	select USE_OF
+	help
+	  Select this if you use ARMv4T Cirrus Logic chips.
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index f04151efd..bd0b7b5d6 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -1,13 +1 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y				:= common.o devices.o
-
-obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
-obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
-obj-$(CONFIG_ARCH_CLEP7312)	+= board-clep7312.o
-obj-$(CONFIG_ARCH_EDB7211)	+= board-edb7211.o
-obj-$(CONFIG_ARCH_P720T)	+= board-p720t.o
+obj-y += board-dt.o
diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot
index eba77d35a..e69de29bb 100644
--- a/arch/arm/mach-clps711x/Makefile.boot
+++ b/arch/arm/mach-clps711x/Makefile.boot
@@ -1,5 +0,0 @@
-# The standard locations for stuff on CLPS711x type processors
-params_phys-y				:= 0xc0000100
-# Should probably have some agreement on these...
-initrd_phys-$(CONFIG_ARCH_P720T)	:= 0xc0400000
-initrd_phys-$(CONFIG_ARCH_CDB89712)	:= 0x00700000
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 45abf6bd5..ba3d7d1b2 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -31,7 +31,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand-gpio.h>
 #include <linux/platform_device.h>
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <mach/hardware.h>
 #include <asm/sizes.h>
@@ -160,7 +160,7 @@ static struct platform_device autcpu12_mmgpio_pdev __initdata = {
 	},
 };
 
-static const struct gpio autcpu12_gpios[] __initconst = {
+static const struct gpio const autcpu12_gpios[] __initconst = {
 	{ AUTCPU12_DPOT_CS,	GPIOF_OUT_INIT_HIGH,	"DPOT CS" },
 	{ AUTCPU12_DPOT_CLK,	GPIOF_OUT_INIT_LOW,	"DPOT CLK" },
 	{ AUTCPU12_DPOT_UD,	GPIOF_OUT_INIT_LOW,	"DPOT UD" },
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index 1ec378c33..972abdb10 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -95,7 +95,7 @@ static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = {
 
 static struct resource cdb89712_bootrom_resources[] __initdata = {
 	DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM |
-			 IORESOURCE_CACHEABLE | IORESOURCE_READONLY),
+			 IORESOURCE_READONLY),
 };
 
 static struct platform_device cdb89712_bootrom_pdev __initdata = {
diff --git a/arch/arm/mach-clps711x/board-dt.c b/arch/arm/mach-clps711x/board-dt.c
new file mode 100644
index 000000000..ee1f83b1a
--- /dev/null
+++ b/arch/arm/mach-clps711x/board-dt.c
@@ -0,0 +1,82 @@
+/*
+ *  Author: Alexander Shiyan <shc_work@mail.ru>, 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/of_fdt.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/sizes.h>
+
+#include <linux/mfd/syscon/clps711x.h>
+
+#include <asm/system_info.h>
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#define CLPS711X_VIRT_BASE	IOMEM(0xfeff4000)
+#define CLPS711X_PHYS_BASE	(0x80000000)
+# define SYSFLG1		(0x0140)
+# define HALT			(0x0800)
+# define UNIQID			(0x2440)
+# define RANDID0		(0x2700)
+# define RANDID1		(0x2704)
+# define RANDID2		(0x2708)
+# define RANDID3		(0x270c)
+
+static struct map_desc clps711x_io_desc __initdata = {
+	.virtual	= (unsigned long)CLPS711X_VIRT_BASE,
+	.pfn		= __phys_to_pfn(CLPS711X_PHYS_BASE),
+	.length		= 48 * SZ_1K,
+	.type		= MT_DEVICE,
+};
+
+static void __init clps711x_map_io(void)
+{
+	iotable_init(&clps711x_io_desc, 1);
+}
+
+static const struct resource clps711x_cpuidle_res =
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128);
+
+static void __init clps711x_init(void)
+{
+	u32 id[5];
+
+	id[0] = readl(CLPS711X_VIRT_BASE + UNIQID);
+	id[1] = readl(CLPS711X_VIRT_BASE + RANDID0);
+	id[2] = readl(CLPS711X_VIRT_BASE + RANDID1);
+	id[3] = readl(CLPS711X_VIRT_BASE + RANDID2);
+	id[4] = readl(CLPS711X_VIRT_BASE + RANDID3);
+	system_rev = SYSFLG1_VERID(readl(CLPS711X_VIRT_BASE + SYSFLG1));
+
+	add_device_randomness(id, sizeof(id));
+
+	system_serial_low = id[0];
+
+	platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE,
+					&clps711x_cpuidle_res, 1);
+}
+
+static void clps711x_restart(enum reboot_mode mode, const char *cmd)
+{
+	soft_restart(0);
+}
+
+static const char *clps711x_compat[] __initconst = {
+	"cirrus,ep7209",
+	NULL
+};
+
+DT_MACHINE_START(CLPS711X_DT, "Cirrus Logic CLPS711X (Device Tree Support)")
+	.dt_compat	= clps711x_compat,
+	.map_io		= clps711x_map_io,
+	.init_late	= clps711x_init,
+	.restart	= clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index e68dd629b..80a16a8b3 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -28,7 +28,7 @@
 #include <linux/leds.h>
 #include <linux/sizes.h>
 #include <linux/backlight.h>
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand-gpio.h>
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 671acc5a3..6466da8f3 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -37,8 +37,8 @@ static struct map_desc clps711x_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long)CLPS711X_VIRT_BASE,
 		.pfn		= __phys_to_pfn(CLPS711X_PHYS_BASE),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE
+		.length		= 48 * SZ_1K,
+		.type		= MT_DEVICE,
 	}
 };
 
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
deleted file mode 100644
index eb052a11a..000000000
--- a/arch/arm/mach-clps711x/include/mach/clps711x.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- *  This file contains the hardware definitions of the Cirrus Logic
- *  ARM7 CLPS711X internal registers.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __MACH_CLPS711X_H
-#define __MACH_CLPS711X_H
-
-#include <linux/mfd/syscon/clps711x.h>
-
-#define CLPS711X_PHYS_BASE	(0x80000000)
-
-#define PADR		(0x0000)
-#define PBDR		(0x0001)
-#define PCDR		(0x0002)
-#define PDDR		(0x0003)
-#define PADDR		(0x0040)
-#define PBDDR		(0x0041)
-#define PCDDR		(0x0042)
-#define PDDDR		(0x0043)
-#define PEDR		(0x0083)
-#define PEDDR		(0x00c3)
-#define SYSCON1		(0x0100)
-#define SYSFLG1		(0x0140)
-#define MEMCFG1		(0x0180)
-#define MEMCFG2		(0x01c0)
-#define DRFPR		(0x0200)
-#define LCDCON		(0x02c0)
-#define TC1D		(0x0300)
-#define TC2D		(0x0340)
-#define RTCDR		(0x0380)
-#define RTCMR		(0x03c0)
-#define PMPCON		(0x0400)
-#define CODR		(0x0440)
-#define UARTDR1		(0x0480)
-#define UBRLCR1		(0x04c0)
-#define SYNCIO		(0x0500)
-#define PALLSW		(0x0540)
-#define PALMSW		(0x0580)
-#define STFCLR		(0x05c0)
-#define HALT		(0x0800)
-#define STDBY		(0x0840)
-
-#define FBADDR		(0x1000)
-#define SYSCON2		(0x1100)
-#define SYSFLG2		(0x1140)
-#define UARTDR2		(0x1480)
-#define UBRLCR2		(0x14c0)
-#define SS2DR		(0x1500)
-#define SS2POP		(0x16c0)
-
-#define DAIR		(0x2000)
-#define DAIDR0		(0x2040)
-#define DAIDR1		(0x2080)
-#define DAIDR2		(0x20c0)
-#define DAISR		(0x2100)
-#define SYSCON3		(0x2200)
-#define LEDFLSH		(0x22c0)
-#define SDCONF		(0x2300)
-#define SDRFPR		(0x2340)
-#define UNIQID		(0x2440)
-#define DAI64FS		(0x2600)
-#define PLLW		(0x2610)
-#define PLLR		(0xa5a8)
-#define RANDID0		(0x2700)
-#define RANDID1		(0x2704)
-#define RANDID2		(0x2708)
-#define RANDID3		(0x270c)
-
-#define LCDCON_GSEN		(1 << 30)
-#define LCDCON_GSMD		(1 << 31)
-
-/* common bits: UARTDR1 / UARTDR2 */
-#define UARTDR_FRMERR		(1 << 8)
-#define UARTDR_PARERR		(1 << 9)
-#define UARTDR_OVERR		(1 << 10)
-
-/* common bits: UBRLCR1 / UBRLCR2 */
-#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
-#define UBRLCR_BREAK		(1 << 12)
-#define UBRLCR_PRTEN		(1 << 13)
-#define UBRLCR_EVENPRT		(1 << 14)
-#define UBRLCR_XSTOP		(1 << 15)
-#define UBRLCR_FIFOEN		(1 << 16)
-#define UBRLCR_WRDLEN5		(0 << 17)
-#define UBRLCR_WRDLEN6		(1 << 17)
-#define UBRLCR_WRDLEN7		(2 << 17)
-#define UBRLCR_WRDLEN8		(3 << 17)
-#define UBRLCR_WRDLEN_MASK	(3 << 17)
-
-#define SYNCIO_FRMLEN(x)	(((x) & 0x1f) << 8)
-#define SYNCIO_SMCKEN		(1 << 13)
-#define SYNCIO_TXFRMEN		(1 << 14)
-
-#define DAIR_RESERVED		(0x0404)
-#define DAIR_DAIEN		(1 << 16)
-#define DAIR_ECS		(1 << 17)
-#define DAIR_LCTM		(1 << 19)
-#define DAIR_LCRM		(1 << 20)
-#define DAIR_RCTM		(1 << 21)
-#define DAIR_RCRM		(1 << 22)
-#define DAIR_LBM		(1 << 23)
-
-#define DAIDR2_FIFOEN		(1 << 15)
-#define DAIDR2_FIFOLEFT		(0x0d << 16)
-#define DAIDR2_FIFORIGHT	(0x11 << 16)
-
-#define DAISR_RCTS		(1 << 0)
-#define DAISR_RCRS		(1 << 1)
-#define DAISR_LCTS		(1 << 2)
-#define DAISR_LCRS		(1 << 3)
-#define DAISR_RCTU		(1 << 4)
-#define DAISR_RCRO		(1 << 5)
-#define DAISR_LCTU		(1 << 6)
-#define DAISR_LCRO		(1 << 7)
-#define DAISR_RCNF		(1 << 8)
-#define DAISR_RCNE		(1 << 9)
-#define DAISR_LCNF		(1 << 10)
-#define DAISR_LCNE		(1 << 11)
-#define DAISR_FIFO		(1 << 12)
-
-#define DAI64FS_I2SF64		(1 << 0)
-#define DAI64FS_AUDIOCLKEN	(1 << 1)
-#define DAI64FS_AUDIOCLKSRC	(1 << 2)
-#define DAI64FS_MCLK256EN	(1 << 3)
-#define DAI64FS_LOOPBACK	(1 << 5)
-
-#define SDCONF_ACTIVE		(1 << 10)
-#define SDCONF_CLKCTL		(1 << 9)
-#define SDCONF_WIDTH_4		(0 << 7)
-#define SDCONF_WIDTH_8		(1 << 7)
-#define SDCONF_WIDTH_16		(2 << 7)
-#define SDCONF_WIDTH_32		(3 << 7)
-#define SDCONF_SIZE_16		(0 << 5)
-#define SDCONF_SIZE_64		(1 << 5)
-#define SDCONF_SIZE_128		(2 << 5)
-#define SDCONF_SIZE_256		(3 << 5)
-#define SDCONF_CASLAT_2		(2)
-#define SDCONF_CASLAT_3		(3)
-
-#define MEMCFG_BUS_WIDTH_32	(1)
-#define MEMCFG_BUS_WIDTH_16	(0)
-#define MEMCFG_BUS_WIDTH_8	(3)
-
-#define MEMCFG_SQAEN		(1 << 6)
-#define MEMCFG_CLKENB		(1 << 7)
-
-#define MEMCFG_WAITSTATE_8_3	(0 << 2)
-#define MEMCFG_WAITSTATE_7_3	(1 << 2)
-#define MEMCFG_WAITSTATE_6_3	(2 << 2)
-#define MEMCFG_WAITSTATE_5_3	(3 << 2)
-#define MEMCFG_WAITSTATE_4_2	(4 << 2)
-#define MEMCFG_WAITSTATE_3_2	(5 << 2)
-#define MEMCFG_WAITSTATE_2_2	(6 << 2)
-#define MEMCFG_WAITSTATE_1_2	(7 << 2)
-#define MEMCFG_WAITSTATE_8_1	(8 << 2)
-#define MEMCFG_WAITSTATE_7_1	(9 << 2)
-#define MEMCFG_WAITSTATE_6_1	(10 << 2)
-#define MEMCFG_WAITSTATE_5_1	(11 << 2)
-#define MEMCFG_WAITSTATE_4_0	(12 << 2)
-#define MEMCFG_WAITSTATE_3_0	(13 << 2)
-#define MEMCFG_WAITSTATE_2_0	(14 << 2)
-#define MEMCFG_WAITSTATE_1_0	(15 << 2)
-
-/* INTSR1 Interrupts */
-#define IRQ_CSINT		(4)
-#define IRQ_EINT1		(5)
-#define IRQ_EINT2		(6)
-#define IRQ_EINT3		(7)
-#define IRQ_TC1OI		(8)
-#define IRQ_TC2OI		(9)
-#define IRQ_RTCMI		(10)
-#define IRQ_TINT		(11)
-#define IRQ_UTXINT1		(12)
-#define IRQ_URXINT1		(13)
-#define IRQ_UMSINT		(14)
-#define IRQ_SSEOTI		(15)
-
-/* INTSR2 Interrupts */
-#define IRQ_KBDINT		(16 + 0)
-#define IRQ_SS2RX		(16 + 1)
-#define IRQ_SS2TX		(16 + 2)
-#define IRQ_UTXINT2		(16 + 12)
-#define IRQ_URXINT2		(16 + 13)
-
-/* INTSR3 Interrupts */
-#define IRQ_DAIINT		(32 + 0)
-
-#endif /* __MACH_CLPS711X_H */
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
deleted file mode 100644
index 833129c9f..000000000
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Prospector P720T.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <mach/clps711x.h>
-
-#define CLPS711X_VIRT_BASE	IOMEM(0xfeff0000)
-
-#ifndef __ASSEMBLY__
-#define clps_readb(off)		readb(CLPS711X_VIRT_BASE + (off))
-#define clps_readw(off)		readw(CLPS711X_VIRT_BASE + (off))
-#define clps_readl(off)		readl(CLPS711X_VIRT_BASE + (off))
-#define clps_writeb(val,off)	writeb(val, CLPS711X_VIRT_BASE + (off))
-#define clps_writew(val,off)	writew(val, CLPS711X_VIRT_BASE + (off))
-#define clps_writel(val,off)	writel(val, CLPS711X_VIRT_BASE + (off))
-#endif
-
-#define CS0_PHYS_BASE		(0x00000000)
-#define CS1_PHYS_BASE		(0x10000000)
-#define CS2_PHYS_BASE		(0x20000000)
-#define CS3_PHYS_BASE		(0x30000000)
-#define CS4_PHYS_BASE		(0x40000000)
-#define CS5_PHYS_BASE		(0x50000000)
-#define CS6_PHYS_BASE		(0x60000000)
-#define CS7_PHYS_BASE		(0x70000000)
-
-#define CLPS711X_SRAM_BASE	CS6_PHYS_BASE
-#define CLPS711X_SRAM_SIZE	(48 * 1024)
-
-#define CLPS711X_SDRAM0_BASE	(0xc0000000)
-#define CLPS711X_SDRAM1_BASE	(0xd0000000)
-
-#endif
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
deleted file mode 100644
index 5f02d06dc..000000000
--- a/arch/arm/mach-clps711x/include/mach/uncompress.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/uncompress.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <mach/clps711x.h>
-
-#ifdef CONFIG_DEBUG_CLPS711X_UART2
-#define SYSFLGx	SYSFLG2
-#define UARTDRx	UARTDR2
-#else
-#define SYSFLGx	SYSFLG1
-#define UARTDRx	UARTDR1
-#endif
-
-#define phys_reg(x)	(*(volatile u32 *)(CLPS711X_PHYS_BASE + (x)))
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (phys_reg(SYSFLGx) & SYSFLG_UTXFF)
-		barrier();
-	phys_reg(UARTDRx) = c;
-}
-
-static inline void flush(void)
-{
-	while (phys_reg(SYSFLGx) & SYSFLG_UBUSY)
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 3c22a1990..eb14a0ff0 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_CNS3XXX
-	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
+	bool "Cavium Networks CNS3XXX family"
+	depends on ARCH_MULTI_V6
 	select ARM_GIC
 	select PCI_DOMAINS if PCI
 	help
diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot
deleted file mode 100644
index d079de0b6..000000000
--- a/arch/arm/mach-cns3xxx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00C00000
diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h
index a0f5b6066..a642ba5fe 100644
--- a/arch/arm/mach-cns3xxx/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
@@ -162,13 +162,11 @@
 #define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
 
 #define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
-#define CNS3XXX_PCIE0_MEM_BASE_VIRT		0xE0000000
 
 #define CNS3XXX_PCIE0_HOST_BASE			0xAB000000	/* PCIe Port 0 RC Base */
 #define CNS3XXX_PCIE0_HOST_BASE_VIRT		0xE1000000
 
 #define CNS3XXX_PCIE0_IO_BASE			0xAC000000	/* PCIe Port 0 */
-#define CNS3XXX_PCIE0_IO_BASE_VIRT		0xE2000000
 
 #define CNS3XXX_PCIE0_CFG0_BASE			0xAD000000	/* PCIe Port 0 CFG Type 0 */
 #define CNS3XXX_PCIE0_CFG0_BASE_VIRT		0xE3000000
@@ -177,16 +175,13 @@
 #define CNS3XXX_PCIE0_CFG1_BASE_VIRT		0xE4000000
 
 #define CNS3XXX_PCIE0_MSG_BASE			0xAF000000	/* PCIe Port 0 Message Space */
-#define CNS3XXX_PCIE0_MSG_BASE_VIRT		0xE5000000
 
 #define CNS3XXX_PCIE1_MEM_BASE			0xB0000000	/* PCIe Port 1 IO/Memory Space */
-#define CNS3XXX_PCIE1_MEM_BASE_VIRT		0xE8000000
 
 #define CNS3XXX_PCIE1_HOST_BASE			0xBB000000	/* PCIe Port 1 RC Base */
 #define CNS3XXX_PCIE1_HOST_BASE_VIRT		0xE9000000
 
 #define CNS3XXX_PCIE1_IO_BASE			0xBC000000	/* PCIe Port 1 */
-#define CNS3XXX_PCIE1_IO_BASE_VIRT		0xEA000000
 
 #define CNS3XXX_PCIE1_CFG0_BASE			0xBD000000	/* PCIe Port 1 CFG Type 0 */
 #define CNS3XXX_PCIE1_CFG0_BASE_VIRT		0xEB000000
@@ -195,7 +190,6 @@
 #define CNS3XXX_PCIE1_CFG1_BASE_VIRT		0xEC000000
 
 #define CNS3XXX_PCIE1_MSG_BASE			0xBF000000	/* PCIe Port 1 Message Space */
-#define CNS3XXX_PCIE1_MSG_BASE_VIRT		0xED000000
 
 /*
  * Testchip peripheral and fpga gic regions
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 4e9837ded..03da3813f 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -113,30 +113,33 @@ void cns3xxx_power_off(void)
  */
 static void __iomem *cns3xxx_tmr1;
 
-static void cns3xxx_timer_set_mode(enum clock_event_mode mode,
-				   struct clock_event_device *clk)
+static int cns3xxx_shutdown(struct clock_event_device *clk)
+{
+	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	return 0;
+}
+
+static int cns3xxx_set_oneshot(struct clock_event_device *clk)
+{
+	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	/* period set, and timer enabled in 'next_event' hook */
+	ctrl |= (1 << 2) | (1 << 9);
+	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	return 0;
+}
+
+static int cns3xxx_set_periodic(struct clock_event_device *clk)
 {
 	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
 	int pclk = cns3xxx_cpu_clock() / 8;
 	int reload;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		reload = pclk * 20 / (3 * HZ) * 0x25000;
-		writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-		ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl |= (1 << 2) | (1 << 9);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
+	reload = pclk * 20 / (3 * HZ) * 0x25000;
+	writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+	ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
 	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	return 0;
 }
 
 static int cns3xxx_timer_set_next_event(unsigned long evt,
@@ -151,12 +154,16 @@ static int cns3xxx_timer_set_next_event(unsigned long evt,
 }
 
 static struct clock_event_device cns3xxx_tmr1_clockevent = {
-	.name		= "cns3xxx timer1",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= cns3xxx_timer_set_mode,
-	.set_next_event	= cns3xxx_timer_set_next_event,
-	.rating		= 350,
-	.cpumask	= cpu_all_mask,
+	.name			= "cns3xxx timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= cns3xxx_shutdown,
+	.set_state_periodic	= cns3xxx_set_periodic,
+	.set_state_oneshot	= cns3xxx_set_oneshot,
+	.tick_resume		= cns3xxx_shutdown,
+	.set_next_event		= cns3xxx_timer_set_next_event,
+	.rating			= 350,
+	.cpumask		= cpu_all_mask,
 };
 
 static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
@@ -339,7 +346,7 @@ static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
 	.power_off	= csn3xxx_usb_power_off,
 };
 
-static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
+static const struct of_dev_auxdata const cns3xxx_auxdata[] __initconst = {
 	{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
 	{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
 	{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
@@ -388,11 +395,10 @@ static void __init cns3xxx_init(void)
 
 	pm_power_off = cns3xxx_power_off;
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-                        cns3xxx_auxdata, NULL);
+	of_platform_default_populate(NULL, cns3xxx_auxdata, NULL);
 }
 
-static const char *cns3xxx_dt_compat[] __initdata = {
+static const char *const cns3xxx_dt_compat[] __initconst = {
 	"cavium,cns3410",
 	"cavium,cns3420",
 	NULL,
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index c622c306c..318394ed5 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -65,8 +65,9 @@ static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
 
 	/*
 	 * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
-	 * we still want to access it. For this to work, we must place
-	 * the first device on the same bus as the CNS PCI bridge.
+	 * we still want to access it.
+	 * We place the host bridge on bus 0, and the directly connected
+	 * device on bus 1, slot 0.
 	 */
 	if (busno == 0) { /* internal PCIe bus, host bridge device */
 		if (devfn == 0) /* device# and function# are ignored by hw */
@@ -211,58 +212,46 @@ static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
 	}
 }
 
+static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci,
+					 int where, int size, u32 val)
+{
+	void __iomem *base = cnspci->host_regs + (where & 0xffc);
+	u32 v;
+	u32 mask = (0x1ull << (size * 8)) - 1;
+	int shift = (where % 4) * 8;
+
+	v = readl_relaxed(base);
+
+	v &= ~(mask << shift);
+	v |= (val & mask) << shift;
+
+	writel_relaxed(v, base);
+	readl_relaxed(base);
+}
+
 static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
 {
-	int port = cnspci->port;
-	struct pci_sys_data sd = {
-		.private_data = cnspci,
-	};
-	struct pci_bus bus = {
-		.number = 0,
-		.ops = &cns3xxx_pcie_ops,
-		.sysdata = &sd,
-	};
 	u16 mem_base  = cnspci->res_mem.start >> 16;
 	u16 mem_limit = cnspci->res_mem.end   >> 16;
 	u16 io_base   = cnspci->res_io.start  >> 16;
 	u16 io_limit  = cnspci->res_io.end    >> 16;
-	u32 devfn = 0;
-	u8 tmp8;
-	u16 pos;
-	u16 dc;
-
-	pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
-	pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
-	pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
 
-	pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8);
-	pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8);
-	pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
-
-	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit);
-	pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit);
+	cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0);
+	cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1);
+	cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1);
+	cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base);
+	cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit);
+	cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base);
+	cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit);
 
 	if (!cnspci->linked)
 		return;
 
 	/* Set Device Max_Read_Request_Size to 128 byte */
-	bus.number = 1; /* directly connected PCIe device */
-	devfn = PCI_DEVFN(0, 0);
-	pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
-	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
-	if (dc & PCI_EXP_DEVCTL_READRQ) {
-		dc &= ~PCI_EXP_DEVCTL_READRQ;
-		pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
-		pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
-		if (dc & PCI_EXP_DEVCTL_READRQ)
-			pr_warn("PCIe: Unable to set device Max_Read_Request_Size\n");
-		else
-			pr_info("PCIe: Max_Read_Request_Size set to 128 bytes\n");
-	}
+	pcie_bus_config = PCIE_BUS_PEER2PEER;
+
 	/* Disable PCIe0 Interrupt Mask INTA to INTD */
-	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
+	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port));
 }
 
 static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index dd8f5312b..36c8f5324 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -9,7 +9,6 @@ config CP_INTC
 
 config ARCH_DAVINCI_DMx
 	bool
-	select CPU_ARM926T
 
 menu "TI DaVinci Implementations"
 
@@ -32,20 +31,20 @@ config ARCH_DAVINCI_DM646x
 
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
 	select ARCH_DAVINCI_DA8XX
-	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+	# needed on silicon revs 1.0, 1.1:
+	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
 	select CP_INTC
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
 	select ARCH_DAVINCI_DA8XX
 	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
 	bool
-	select CPU_ARM926T
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
@@ -57,7 +56,7 @@ comment "DaVinci Board Type"
 config MACH_DA8XX_DT
 	bool "Support DA8XX platforms using device tree"
 	default y
-	depends on ARCH_DAVINCI_DA8XX
+	depends on ARCH_DAVINCI_DA850
 	select PINCTRL
 	help
 	  Say y here to include support for TI DaVinci DA850 based using
@@ -67,8 +66,6 @@ config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
 	default ARCH_DAVINCI_DM644x
 	depends on ARCH_DAVINCI_DM644x
-	select EEPROM_AT24
-	select I2C
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
@@ -76,8 +73,6 @@ config MACH_DAVINCI_EVM
 config MACH_SFFSDR
 	bool "Lyrtech SFFSDR"
 	depends on ARCH_DAVINCI_DM644x
-	select EEPROM_AT24
-	select I2C
 	help
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
@@ -108,8 +103,6 @@ config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
 	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
-	select EEPROM_AT24
-	select I2C
 	select MACH_DAVINCI_DM6467TEVM
 	help
 	  Configure this option to specify the whether the board used
@@ -122,8 +115,6 @@ config MACH_DAVINCI_DM365_EVM
 	bool "TI DM365 EVM"
 	default ARCH_DAVINCI_DM365
 	depends on ARCH_DAVINCI_DM365
-	select EEPROM_AT24
-	select I2C
 	help
 	  Configure this option to specify whether the board used
 	  for development is a DM365 EVM
@@ -132,9 +123,7 @@ config MACH_DAVINCI_DA830_EVM
 	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
-	select EEPROM_AT24
-	select GPIO_PCF857X
-	select I2C
+	select GPIO_PCF857X if I2C
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 
@@ -203,8 +192,6 @@ endchoice
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 	depends on ARCH_DAVINCI_DA850
-	select EEPROM_AT24
-	select I2C
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2e3464b8b..da4c336b4 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -14,8 +14,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o devices-da8xx.o usb-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o devices-da8xx.o usb-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index f8f62fbaa..3d8cf8cbd 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -32,7 +32,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/mux.h>
 #include <mach/da8xx.h>
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1ed545cc2..8e4539f69 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -40,17 +40,17 @@
 #include <linux/spi/flash.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <mach/mux.h>
-#include <mach/sram.h>
+#include "sram.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/system_info.h>
 
-#include <media/tvp514x.h>
-#include <media/adv7343.h>
+#include <media/i2c/tvp514x.h>
+#include <media/i2c/adv7343.h>
 
 #define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index b46b4d25f..18296a99c 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -19,7 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
-#include <media/tvp514x.h>
+#include <media/i2c/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -115,8 +115,6 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.scl_pin        = 14,
 };
 
-static struct snd_platform_data dm355_evm_snd_data;
-
 static int dm355evm_mmc_gpios = -EINVAL;
 
 static void dm355evm_mmcsd_gpios(unsigned gpio)
@@ -384,9 +382,7 @@ static __init void dm355_evm_init(void)
 	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
 
 	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
-	if (IS_ERR(aemif))
-		WARN("%s: unable to get AEMIF clock\n", __func__);
-	else
+	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
 		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_evm_devices,
@@ -413,7 +409,7 @@ static __init void dm355_evm_init(void)
 			ARRAY_SIZE(dm355_evm_spi_info));
 
 	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
-	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
+	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN);
 }
 
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 680a7a2d9..284ff27c1 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -242,9 +242,7 @@ static __init void dm355_leopard_init(void)
 	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
 
 	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
-	if (IS_ERR(aemif))
-		WARN("%s: unable to get AEMIF clock\n", __func__);
-	else
+	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
 		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_leopard_devices,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index a75600359..0464999b7 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -40,8 +40,8 @@
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/keyscan-davinci.h>
 
-#include <media/ths7303.h>
-#include <media/tvp514x.h>
+#include <media/i2c/ths7303.h>
+#include <media/i2c/tvp514x.h>
 
 #include "davinci.h"
 
@@ -176,10 +176,6 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
-static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
-	.asp_chan_q = EVENTQ_3,
-};
-
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -763,9 +759,9 @@ static __init void dm365_evm_init(void)
 	evm_init_cpld();
 
 #ifdef CONFIG_SND_DM365_AIC3X_CODEC
-	dm365_init_asp(&dm365_evm_snd_data);
+	dm365_init_asp();
 #elif defined(CONFIG_SND_DM365_VOICE_CODEC)
-	dm365_init_vc(&dm365_evm_snd_data);
+	dm365_init_vc();
 #endif
 	dm365_init_rtc();
 	dm365_init_ks(&dm365evm_ks_data);
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 1a0898c1c..521e40977 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -26,7 +26,7 @@
 #include <linux/v4l2-dv-timings.h>
 #include <linux/export.h>
 
-#include <media/tvp514x.h>
+#include <media/i2c/tvp514x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -264,10 +264,8 @@ static struct platform_device rtc_dev = {
 	.id             = -1,
 };
 
-static struct snd_platform_data dm644x_evm_snd_data;
-
 /*----------------------------------------------------------------------*/
-
+#ifdef CONFIG_I2C
 /*
  * I2C GPIO expanders
  */
@@ -288,7 +286,7 @@ static struct gpio_led evm_leds[] = {
 	{ .name = "DS2", .active_low = 1,
 		.default_trigger = "mmc0", },
 	{ .name = "DS1", .active_low = 1,
-		.default_trigger = "ide-disk", },
+		.default_trigger = "disk-activity", },
 };
 
 static const struct gpio_led_platform_data evm_led_data = {
@@ -546,9 +544,7 @@ static int dm6444evm_msp430_get_pins(void)
 	if (status < 0)
 		return status;
 
-	dev_dbg(&dm6446evm_msp->dev,
-		"PINS: %02x %02x %02x %02x\n",
-		buf[0], buf[1], buf[2], buf[3]);
+	dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf);
 
 	return (buf[3] << 8) | buf[2];
 }
@@ -614,6 +610,7 @@ static void __init evm_init_i2c(void)
 	i2c_add_driver(&dm6446evm_msp_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
+#endif
 
 #define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
 
@@ -782,7 +779,9 @@ static __init void davinci_evm_init(void)
 				pr_warn("%s: Cannot configure AEMIF\n",
 					__func__);
 
+#ifdef CONFIG_I2C
 			evm_leds[7].default_trigger = "nand-disk";
+#endif
 			if (HAS_NOR)
 				pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n");
 		} else if (HAS_NOR)
@@ -791,13 +790,14 @@ static __init void davinci_evm_init(void)
 
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
+#ifdef CONFIG_I2C
 	evm_init_i2c();
-
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
+#endif
 	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
 	davinci_serial_init(dm644x_serial_device);
-	dm644x_init_asp(&dm644x_evm_snd_data);
+	dm644x_init_asp();
 
 	/* irlml6401 switches over 1A, in under 8 msec */
 	davinci_setup_usb(1000, 8);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 846a84ddc..f702d4fc8 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -25,8 +25,8 @@
 #include <linux/platform_data/at24.h>
 #include <linux/i2c/pcf857x.h>
 
-#include <media/tvp514x.h>
-#include <media/adv7343.h>
+#include <media/i2c/tvp514x.h>
+#include <media/i2c/adv7343.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -121,6 +121,7 @@ static struct platform_device davinci_nand_device = {
 
 #define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
 
+#ifdef CONFIG_I2C
 /* CPLD Register 0 bits to control ATA */
 #define DM646X_EVM_ATA_RST		BIT(0)
 #define DM646X_EVM_ATA_PWD		BIT(1)
@@ -316,6 +317,7 @@ static struct at24_platform_data eeprom_info = {
 	.setup          = davinci_get_mac_addr,
 	.context	= (void *)0x7f00,
 };
+#endif
 
 static u8 dm646x_iis_serializer_direction[] = {
        TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
@@ -346,6 +348,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 	},
 };
 
+#ifdef CONFIG_I2C
 static struct i2c_client *cpld_client;
 
 static int cpld_video_probe(struct i2c_client *client,
@@ -710,6 +713,7 @@ static void __init evm_init_i2c(void)
 	evm_init_cpld();
 	evm_init_video();
 }
+#endif
 
 #define DM6467T_EVM_REF_FREQ		33000000
 
@@ -764,7 +768,10 @@ static __init void evm_init(void)
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
+#ifdef CONFIG_I2C
 	evm_init_i2c();
+#endif
+
 	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 8cfbfe084..bc4e63fa9 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -26,7 +26,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
@@ -51,6 +51,7 @@ struct factory_config {
 
 static struct factory_config factory_config;
 
+#ifdef CONFIG_CPU_FREQ
 struct part_no_info {
 	const char	*part_no;	/* part number string of interest */
 	int		max_freq;	/* khz */
@@ -87,7 +88,6 @@ static struct part_no_info mityomapl138_pn_info[] = {
 	},
 };
 
-#ifdef CONFIG_CPU_FREQ
 static void mityomapl138_cpufreq_init(const char *partnum)
 {
 	int i, ret;
@@ -115,13 +115,19 @@ static void mityomapl138_cpufreq_init(const char *partnum)
 static void mityomapl138_cpufreq_init(const char *partnum) { }
 #endif
 
-static void read_factory_config(struct memory_accessor *a, void *context)
+static void read_factory_config(struct nvmem_device *nvmem, void *context)
 {
 	int ret;
 	const char *partnum = NULL;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
-	ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
+	if (!IS_BUILTIN(CONFIG_NVMEM)) {
+		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
+		goto bad_config;
+	}
+
+	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
+				&factory_config);
 	if (ret != sizeof(struct factory_config)) {
 		pr_warn("Read Factory Config Failed: %d\n", ret);
 		goto bad_config;
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 8fcdcf87c..ad1001720 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -127,8 +127,6 @@ static struct platform_device davinci_fb_device = {
 	.num_resources = 0,
 };
 
-static struct snd_platform_data dm644x_ntosd2_snd_data;
-
 static struct gpio_led ntosd2_leds[] = {
 	{ .name = "led1_green", .gpio = GPIO(10), },
 	{ .name = "led1_red",   .gpio = GPIO(11), },
@@ -200,7 +198,7 @@ static __init void davinci_ntosd2_init(void)
 				ARRAY_SIZE(davinci_ntosd2_devices));
 
 	davinci_serial_init(dm644x_serial_device);
-	dm644x_init_asp(&dm644x_ntosd2_snd_data);
+	dm644x_init_asp();
 
 	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
 
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 2aac51d0e..ee624861c 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -19,7 +19,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <mach/mux.h>
 
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index c70bb0a4d..df42c93a9 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -23,7 +23,7 @@
 #include <mach/hardware.h>
 
 #include <mach/clock.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/cputype.h>
 #include "clock.h"
 
@@ -97,7 +97,9 @@ int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 
-	if (clk == NULL || IS_ERR(clk))
+	if (!clk)
+		return 0;
+	else if (IS_ERR(clk))
 		return -EINVAL;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
@@ -124,7 +126,7 @@ EXPORT_SYMBOL(clk_disable);
 unsigned long clk_get_rate(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
+		return 0;
 
 	return clk->rate;
 }
@@ -159,8 +161,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	unsigned long flags;
 	int ret = -EINVAL;
 
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
+	if (!clk)
+		return 0;
+	else if (IS_ERR(clk))
+		return -EINVAL;
 
 	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
@@ -181,7 +185,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	unsigned long flags;
 
-	if (clk == NULL || IS_ERR(clk))
+	if (!clk)
+		return 0;
+	else if (IS_ERR(clk))
 		return -EINVAL;
 
 	/* Cannot change parent on enabled clock */
@@ -189,6 +195,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		return -EINVAL;
 
 	mutex_lock(&clocks_mutex);
+	if (clk->set_parent) {
+		int ret = clk->set_parent(clk, parent);
+
+		if (ret) {
+			mutex_unlock(&clocks_mutex);
+			return ret;
+		}
+	}
 	clk->parent = parent;
 	list_del_init(&clk->childnode);
 	list_add(&clk->childnode, &clk->parent->children);
@@ -218,8 +232,17 @@ int clk_register(struct clk *clk)
 
 	mutex_lock(&clocks_mutex);
 	list_add_tail(&clk->node, &clocks);
-	if (clk->parent)
+	if (clk->parent) {
+		if (clk->set_parent) {
+			int ret = clk->set_parent(clk, clk->parent);
+
+			if (ret) {
+				mutex_unlock(&clocks_mutex);
+				return ret;
+			}
+		}
 		list_add_tail(&clk->childnode, &clk->parent->children);
+	}
 	mutex_unlock(&clocks_mutex);
 
 	/* If rate is already set, use it */
@@ -554,7 +577,7 @@ EXPORT_SYMBOL(davinci_set_pllrate);
  * than that used by default in <soc>.c file. The reference clock rate
  * should be updated early in the boot process; ideally soon after the
  * clock tree has been initialized once with the default reference clock
- * rate (davinci_common_init()).
+ * rate (davinci_clk_init()).
  *
  * Returns 0 on success, error otherwise.
  */
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 1e4e83617..e2a5437a1 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -106,6 +106,7 @@ struct clk {
 	int (*reset) (struct clk *clk, bool reset);
 	void (*clk_enable) (struct clk *clk);
 	void (*clk_disable) (struct clk *clk);
+	int (*set_parent) (struct clk *clk, struct clk *parent);
 };
 
 /* Clock flags: SoC-specific flags start at BIT(16) */
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index a794f6d9d..049025f6d 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -28,13 +28,18 @@ EXPORT_SYMBOL(davinci_soc_info);
 void __iomem *davinci_intc_base;
 int davinci_intc_type;
 
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
 {
 	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
 	off_t offset = (off_t)context;
 
+	if (!IS_BUILTIN(CONFIG_NVMEM)) {
+		pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
+		return;
+	}
+
 	/* Read MAC addr from EEPROM */
-	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
 		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
 }
 
@@ -103,12 +108,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	if (ret < 0)
 		goto err;
 
-	if (davinci_soc_info.cpu_clks) {
-		ret = davinci_clk_init(davinci_soc_info.cpu_clks);
-
-		if (ret != 0)
-			goto err;
-	}
 
 	return;
 
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index 006dae8df..94085d210 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -12,6 +12,7 @@
 #include <linux/export.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/io.h>
 #include <linux/of.h>
@@ -19,7 +20,7 @@
 #include <linux/of_irq.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 
 static inline unsigned int cp_intc_read(unsigned offset)
 {
@@ -85,23 +86,13 @@ static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type)
 	return 0;
 }
 
-/*
- * Faking this allows us to to work with suspend functions of
- * generic drivers which call {enable|disable}_irq_wake for
- * wake up interrupt sources (eg RTC on DA850).
- */
-static int cp_intc_set_wake(struct irq_data *d, unsigned int on)
-{
-	return 0;
-}
-
 static struct irq_chip cp_intc_irq_chip = {
 	.name		= "cp_intc",
 	.irq_ack	= cp_intc_ack_irq,
 	.irq_mask	= cp_intc_mask_irq,
 	.irq_unmask	= cp_intc_unmask_irq,
 	.irq_set_type	= cp_intc_set_irq_type,
-	.irq_set_wake	= cp_intc_set_wake,
+	.flags		= IRQCHIP_SKIP_SET_WAKE,
 };
 
 static struct irq_domain *cp_intc_domain;
@@ -112,7 +103,7 @@ static int cp_intc_host_map(struct irq_domain *h, unsigned int virq,
 	pr_debug("cp_intc_host_map(%d, 0x%lx)\n", virq, hw);
 
 	irq_set_chip(virq, &cp_intc_irq_chip);
-	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+	irq_set_probe(virq);
 	irq_set_handler(virq, handle_edge_irq);
 	return 0;
 }
@@ -220,3 +211,5 @@ void __init cp_intc_init(void)
 {
 	cp_intc_of_init(NULL, NULL);
 }
+
+IRQCHIP_DECLARE(cp_intc, "ti,cp-intc", cp_intc_of_init);
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/cp_intc.h
index 827bbe9ba..827bbe9ba 100644
--- a/arch/arm/mach-davinci/include/mach/cp_intc.h
+++ b/arch/arm/mach-davinci/cp_intc.h
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index 306ebc515..1b8f08532 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -19,8 +19,8 @@
 #include <linux/export.h>
 #include <asm/cpuidle.h>
 
-#include <mach/cpuidle.h>
-#include <mach/ddr2.h>
+#include "cpuidle.h"
+#include "ddr2.h"
 
 #define DAVINCI_CPUIDLE_MAX_STATES	2
 
diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/cpuidle.h
index 74f088b0e..74f088b0e 100644
--- a/arch/arm/mach-davinci/include/mach/cpuidle.h
+++ b/arch/arm/mach-davinci/cpuidle.h
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 115d5736d..426fd7477 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -15,7 +15,7 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>
@@ -1214,4 +1214,6 @@ void __init da830_init(void)
 
 	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
 	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
+
+	davinci_clk_init(davinci_soc_info_da830.cpu_clks);
 }
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 3b8740c08..0d046accb 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -22,7 +22,7 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>
@@ -34,9 +34,6 @@
 #include "clock.h"
 #include "mux.h"
 
-/* SoC specific clock flags */
-#define DA850_CLK_ASYNC3	BIT(16)
-
 #define DA850_PLL1_BASE		0x01e1a000
 #define DA850_TIMER64P2_BASE	0x01f0c000
 #define DA850_TIMER64P3_BASE	0x01f0d000
@@ -161,6 +158,32 @@ static struct clk pll1_sysclk3 = {
 	.div_reg	= PLLDIV3,
 };
 
+static int da850_async3_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 val;
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+
+	if (parent == &pll0_sysclk2) {
+		val &= ~CFGCHIP3_ASYNC3_CLKSRC;
+	} else if (parent == &pll1_sysclk2) {
+		val |= CFGCHIP3_ASYNC3_CLKSRC;
+	} else {
+		pr_err("Bad parent on async3 clock mux\n");
+		return -EINVAL;
+	}
+
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+
+	return 0;
+}
+
+static struct clk async3_clk = {
+	.name		= "async3",
+	.parent		= &pll1_sysclk2,
+	.set_parent	= da850_async3_set_parent,
+};
+
 static struct clk i2c0_clk = {
 	.name		= "i2c0",
 	.parent		= &pll0_aux_clk,
@@ -234,18 +257,16 @@ static struct clk uart0_clk = {
 
 static struct clk uart1_clk = {
 	.name		= "uart1",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_UART1,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk uart2_clk = {
 	.name		= "uart2",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_UART2,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk aintc_clk = {
@@ -300,10 +321,23 @@ static struct clk emac_clk = {
 
 static struct clk mcasp_clk = {
 	.name		= "mcasp",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_McASP0,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
+};
+
+static struct clk mcbsp0_clk = {
+	.name		= "mcbsp0",
+	.parent		= &async3_clk,
+	.lpsc		= DA850_LPSC1_McBSP0,
+	.gpsc		= 1,
+};
+
+static struct clk mcbsp1_clk = {
+	.name		= "mcbsp1",
+	.parent		= &async3_clk,
+	.lpsc		= DA850_LPSC1_McBSP1,
+	.gpsc		= 1,
 };
 
 static struct clk lcdc_clk = {
@@ -355,10 +389,9 @@ static struct clk spi0_clk = {
 
 static struct clk spi1_clk = {
 	.name		= "spi1",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_SPI1,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk vpif_clk = {
@@ -386,10 +419,9 @@ static struct clk dsp_clk = {
 
 static struct clk ehrpwm_clk = {
 	.name		= "ehrpwm",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_PWM,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 #define DA8XX_EHRPWM_TBCLKSYNC	BIT(12)
@@ -421,10 +453,9 @@ static struct clk ehrpwm_tbclk = {
 
 static struct clk ecap_clk = {
 	.name		= "ecap",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_ECAP,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk_lookup da850_clks[] = {
@@ -442,6 +473,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"pll1_aux",	&pll1_aux_clk),
 	CLK(NULL,		"pll1_sysclk2",	&pll1_sysclk2),
 	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
+	CLK(NULL,		"async3",	&async3_clk),
 	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
 	CLK(NULL,		"timer0",	&timerp64_0_clk),
 	CLK("davinci-wdt",	NULL,		&timerp64_1_clk),
@@ -464,6 +496,8 @@ static struct clk_lookup da850_clks[] = {
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK("davinci_mdio.0",	"fck",		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
+	CLK("davinci-mcbsp.0",	NULL,		&mcbsp0_clk),
+	CLK("davinci-mcbsp.1",	NULL,		&mcbsp1_clk),
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
 	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
@@ -715,7 +749,7 @@ const short da850_lcdcntl_pins[] __initconst = {
 	-1
 };
 
-const short da850_vpif_capture_pins[] __initdata = {
+const short da850_vpif_capture_pins[] __initconst = {
 	DA850_VPIF_DIN0, DA850_VPIF_DIN1, DA850_VPIF_DIN2, DA850_VPIF_DIN3,
 	DA850_VPIF_DIN4, DA850_VPIF_DIN5, DA850_VPIF_DIN6, DA850_VPIF_DIN7,
 	DA850_VPIF_DIN8, DA850_VPIF_DIN9, DA850_VPIF_DIN10, DA850_VPIF_DIN11,
@@ -725,7 +759,7 @@ const short da850_vpif_capture_pins[] __initdata = {
 	-1
 };
 
-const short da850_vpif_display_pins[] __initdata = {
+const short da850_vpif_display_pins[] __initconst = {
 	DA850_VPIF_DOUT0, DA850_VPIF_DOUT1, DA850_VPIF_DOUT2, DA850_VPIF_DOUT3,
 	DA850_VPIF_DOUT4, DA850_VPIF_DOUT5, DA850_VPIF_DOUT6, DA850_VPIF_DOUT7,
 	DA850_VPIF_DOUT8, DA850_VPIF_DOUT9, DA850_VPIF_DOUT10,
@@ -909,30 +943,6 @@ static struct davinci_timer_info da850_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
-static void da850_set_async3_src(int pllnum)
-{
-	struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
-	struct clk_lookup *c;
-	unsigned int v;
-	int ret;
-
-	for (c = da850_clks; c->clk; c++) {
-		clk = c->clk;
-		if (clk->flags & DA850_CLK_ASYNC3) {
-			ret = clk_set_parent(clk, newparent);
-			WARN(ret, "DA850: unable to re-parent clock %s",
-								clk->name);
-		}
-       }
-
-	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-	if (pllnum)
-		v |= CFGCHIP3_ASYNC3_CLKSRC;
-	else
-		v &= ~CFGCHIP3_ASYNC3_CLKSRC;
-	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-}
-
 #ifdef CONFIG_CPU_FREQ
 /*
  * Notes:
@@ -1328,15 +1338,6 @@ void __init da850_init(void)
 	if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"))
 		return;
 
-	/*
-	 * Move the clock source of Async3 domain to PLL1 SYSCLK2.
-	 * This helps keeping the peripherals on this domain insulated
-	 * from CPU frequency changes caused by DVFS. The firmware sets
-	 * both PLL0 and PLL1 to the same frequency so, there should not
-	 * be any noticeable change even in non-DVFS use cases.
-	 */
-	da850_set_async3_src(1);
-
 	/* Unlock writing to PLL0 registers */
 	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
 	v &= ~CFGCHIP0_PLL_MASTER_LOCK;
@@ -1346,4 +1347,6 @@ void __init da850_init(void)
 	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
 	v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
 	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+
+	davinci_clk_init(davinci_soc_info_da850.cpu_clks);
 }
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 438f68547..754f47811 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -15,23 +15,12 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 
-#define DA8XX_NUM_UARTS	3
-
-static const struct of_device_id da8xx_irq_match[] __initconst = {
-	{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
-	{ }
-};
-
-static void __init da8xx_init_irq(void)
-{
-	of_irq_init(da8xx_irq_match);
-}
-
 static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
+	OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL),
 	OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL),
 	OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
 	OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL),
@@ -39,6 +28,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap", NULL),
 	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL),
 	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL),
+	OF_DEV_AUXDATA("ti,da830-spi", 0x01c41000, "spi_davinci.0", NULL),
 	OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL),
 	OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL),
 	OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL),
@@ -54,12 +44,10 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 
 static void __init da850_init_machine(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     da850_auxdata_lookup, NULL);
-
+	of_platform_default_populate(NULL, da850_auxdata_lookup, NULL);
 }
 
-static const char *da850_boards_compat[] __initdata = {
+static const char *const da850_boards_compat[] __initconst = {
 	"enbw,cmc",
 	"ti,da850-evm",
 	"ti,da850",
@@ -68,7 +56,6 @@ static const char *da850_boards_compat[] __initdata = {
 
 DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
 	.map_io		= da850_init,
-	.init_irq	= da8xx_init_irq,
 	.init_time	= davinci_timer_init,
 	.init_machine	= da850_init_machine,
 	.dt_compat	= da850_boards_compat,
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 4ffc37acc..c62b90c61 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -85,14 +85,14 @@ int davinci_init_wdt(void);
 void dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
-void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+void dm355_init_asp1(u32 evt_enable);
 int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
 int dm355_gpio_register(void);
 
 /* DM365 function declarations */
 void dm365_init(void);
-void dm365_init_asp(struct snd_platform_data *pdata);
-void dm365_init_vc(struct snd_platform_data *pdata);
+void dm365_init_asp(void);
+void dm365_init_vc(void);
 void dm365_init_ks(struct davinci_ks_platform_data *pdata);
 void dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
@@ -102,7 +102,7 @@ int dm365_gpio_register(void);
 
 /* DM644x function declarations */
 void dm644x_init(void);
-void dm644x_init_asp(struct snd_platform_data *pdata);
+void dm644x_init_asp(void);
 int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
 int dm644x_gpio_register(void);
 
diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/ddr2.h
index c19e047d0..c19e047d0 100644
--- a/arch/arm/mach-davinci/include/mach/ddr2.h
+++ b/arch/arm/mach-davinci/ddr2.h
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index ddfdd820e..add3771d3 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -17,13 +17,14 @@
 #include <linux/ahci_platform.h>
 #include <linux/clk.h>
 #include <linux/reboot.h>
+#include <linux/dmaengine.h>
 
 #include <mach/cputype.h>
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/cpuidle.h>
-#include <mach/sram.h>
+#include "cpuidle.h"
+#include "sram.h"
 
 #include "clock.h"
 #include "asp.h"
@@ -147,150 +148,163 @@ static s8 da850_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static struct edma_soc_info da830_edma_cc0_info = {
+static struct edma_soc_info da8xx_edma0_pdata = {
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
-	&da830_edma_cc0_info,
+static struct edma_soc_info da850_edma1_pdata = {
+	.queue_priority_mapping	= da850_queue_priority_mapping,
+	.default_queue		= EVENTQ_0,
 };
 
-static struct edma_soc_info da850_edma_cc_info[] = {
+static struct resource da8xx_edma0_resources[] = {
 	{
-		.queue_priority_mapping	= da8xx_queue_priority_mapping,
-		.default_queue		= EVENTQ_1,
-	},
-	{
-		.queue_priority_mapping	= da850_queue_priority_mapping,
-		.default_queue		= EVENTQ_0,
-	},
-};
-
-static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = {
-	&da850_edma_cc_info[0],
-	&da850_edma_cc_info[1],
-};
-
-static struct resource da830_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= DA8XX_TPCC_BASE,
 		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= DA8XX_TPTC0_BASE,
 		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= DA8XX_TPTC1_BASE,
 		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_DA8XX_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_DA8XX_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct resource da850_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= DA8XX_TPCC_BASE,
-		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= DA8XX_TPTC0_BASE,
-		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= DA8XX_TPTC1_BASE,
-		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+static struct resource da850_edma1_resources[] = {
 	{
-		.name	= "edma_cc1",
+		.name	= "edma3_cc",
 		.start	= DA850_TPCC1_BASE,
 		.end	= DA850_TPCC1_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc0",
 		.start	= DA850_TPTC2_BASE,
 		.end	= DA850_TPTC2_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
-		.start	= IRQ_DA8XX_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_DA8XX_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma1",
+		.name	= "edma3_ccint",
 		.start	= IRQ_DA850_CCINT1,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma1_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_DA850_CCERRINT1,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device da830_edma_device = {
+static const struct platform_device_info da8xx_edma0_device __initconst = {
 	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da830_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da830_edma_resources),
-	.resource	= da830_edma_resources,
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= da8xx_edma0_resources,
+	.num_res	= ARRAY_SIZE(da8xx_edma0_resources),
+	.data		= &da8xx_edma0_pdata,
+	.size_data	= sizeof(da8xx_edma0_pdata),
 };
 
-static struct platform_device da850_edma_device = {
+static const struct platform_device_info da850_edma1_device __initconst = {
 	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da850_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da850_edma_resources),
-	.resource	= da850_edma_resources,
+	.id		= 1,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= da850_edma1_resources,
+	.num_res	= ARRAY_SIZE(da850_edma1_resources),
+	.data		= &da850_edma1_pdata,
+	.size_data	= sizeof(da850_edma1_pdata),
+};
+
+static const struct dma_slave_map da830_edma_map[] = {
+	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
+	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
+	{ "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) },
+	{ "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) },
+	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
+	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
+	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
+	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
+	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
+	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
 };
 
 int __init da830_register_edma(struct edma_rsv_info *rsv)
 {
-	da830_edma_cc0_info.rsv = rsv;
+	struct platform_device *edma_pdev;
+
+	da8xx_edma0_pdata.rsv = rsv;
 
-	return platform_device_register(&da830_edma_device);
+	da8xx_edma0_pdata.slave_map = da830_edma_map;
+	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map);
+
+	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
+static const struct dma_slave_map da850_edma0_map[] = {
+	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
+	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
+	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 4) },
+	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 5) },
+	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
+	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
+	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
+	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
+	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
+	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
+};
+
+static const struct dma_slave_map da850_edma1_map[] = {
+	{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(1, 28) },
+	{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(1, 29) },
+};
+
 int __init da850_register_edma(struct edma_rsv_info *rsv[2])
 {
+	struct platform_device *edma_pdev;
+
 	if (rsv) {
-		da850_edma_cc_info[0].rsv = rsv[0];
-		da850_edma_cc_info[1].rsv = rsv[1];
+		da8xx_edma0_pdata.rsv = rsv[0];
+		da850_edma1_pdata.rsv = rsv[1];
+	}
+
+	da8xx_edma0_pdata.slave_map = da850_edma0_map;
+	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da850_edma0_map);
+
+	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA0\n", __func__);
+		return PTR_ERR(edma_pdev);
 	}
 
-	return platform_device_register(&da850_edma_device);
+	da850_edma1_pdata.slave_map = da850_edma1_map;
+	da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map);
+
+	edma_pdev = platform_device_register_full(&da850_edma1_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 static struct resource da8xx_i2c_resources0[] = {
@@ -737,16 +751,6 @@ static struct resource da8xx_mmcsd0_resources[] = {
 		.end	= IRQ_DA8XX_MMCSDINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
-	{		/* DMA RX */
-		.start	= DA8XX_DMA_MMCSD0_RX,
-		.end	= DA8XX_DMA_MMCSD0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{		/* DMA TX */
-		.start	= DA8XX_DMA_MMCSD0_TX,
-		.end	= DA8XX_DMA_MMCSD0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static struct platform_device da8xx_mmcsd0_device = {
@@ -774,16 +778,6 @@ static struct resource da850_mmcsd1_resources[] = {
 		.end	= IRQ_DA850_MMCSDINT0_1,
 		.flags	= IORESOURCE_IRQ,
 	},
-	{		/* DMA RX */
-		.start	= DA850_DMA_MMCSD1_RX,
-		.end	= DA850_DMA_MMCSD1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{		/* DMA TX */
-		.start	= DA850_DMA_MMCSD1_TX,
-		.end	= DA850_DMA_MMCSD1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static struct platform_device da850_mmcsd1_device = {
@@ -1010,11 +1004,13 @@ static struct davinci_spi_platform_data da8xx_spi_pdata[] = {
 		.version	= SPI_VERSION_2,
 		.intr_line	= 1,
 		.dma_event_q	= EVENTQ_0,
+		.prescaler_limit = 2,
 	},
 	[1] = {
 		.version	= SPI_VERSION_2,
 		.intr_line	= 1,
 		.dma_event_q	= EVENTQ_0,
+		.prescaler_limit = 2,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 6257aa452..67d26c5bd 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -144,14 +144,6 @@ static struct resource mmcsd0_resources[] = {
 		.start = IRQ_SDIOINT,
 		.flags = IORESOURCE_IRQ,
 	},
-	/* DMA channels: RX, then TX */
-	{
-		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
-		.flags = IORESOURCE_DMA,
-	},
 };
 
 static struct platform_device davinci_mmcsd0_device = {
@@ -181,14 +173,6 @@ static struct resource mmcsd1_resources[] = {
 		.start = IRQ_DM355_SDIOINT1,
 		.flags = IORESOURCE_IRQ,
 	},
-	/* DMA channels: RX, then TX */
-	{
-		.start = EDMA_CTLR_CHAN(0, 30),	/* rx */
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = EDMA_CTLR_CHAN(0, 31),	/* tx */
-		.flags = IORESOURCE_DMA,
-	},
 };
 
 static struct platform_device davinci_mmcsd1_device = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 9cbeda798..d33322dde 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,6 +13,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -21,7 +22,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/time.h>
@@ -411,6 +412,7 @@ static struct davinci_spi_platform_data dm355_spi0_pdata = {
 	.num_chipselect = 2,
 	.cshold_bug	= true,
 	.dma_event_q	= EVENTQ_1,
+	.prescaler_limit = 1,
 };
 static struct platform_device dm355_spi0_device = {
 	.name = "spi_davinci",
@@ -568,61 +570,77 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_priority_mapping[][2] = {
+static s8 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{1, 7},
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static const struct dma_slave_map dm355_edma_map[] = {
+	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) },
+	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) },
+	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
+	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
+	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
+	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
+	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
+	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
+	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
+	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
+	{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
+	{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
+};
+
+static struct edma_soc_info dm355_edma_pdata = {
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
-       &edma_cc0_info,
+	.slave_map		= dm355_edma_map,
+	.slavecnt		= ARRAY_SIZE(dm355_edma_map),
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using (or muxing) TC*_ERR */
 };
 
-static struct platform_device dm355_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm355_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm355_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm355_edma_pdata,
+	.size_data	= sizeof(dm355_edma_pdata),
 };
 
 static struct resource dm355_asp1_resources[] = {
@@ -1017,7 +1035,7 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.sram_len		= SZ_32K,
 };
 
-void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
+void __init dm355_init_asp1(u32 evt_enable)
 {
 	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
 	if (evt_enable & ASP1_TX_EVT_EN)
@@ -1026,7 +1044,6 @@ void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
 	if (evt_enable & ASP1_RX_EVT_EN)
 		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
 
-	dm355_asp1_device.dev.platform_data = pdata;
 	platform_device_register(&dm355_asp1_device);
 }
 
@@ -1034,6 +1051,7 @@ void __init dm355_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm355);
 	davinci_map_sysmod();
+	davinci_clk_init(davinci_soc_info_dm355.cpu_clks);
 }
 
 int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
@@ -1061,13 +1079,18 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm355_init_devices(void)
 {
+	struct platform_device *edma_pdev;
 	int ret = 0;
 
 	if (!cpu_is_davinci_dm355())
 		return 0;
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
-	platform_device_register(&dm355_edma_device);
+	edma_pdev = platform_device_register_full(&dm355_edma_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
 
 	ret = davinci_init_wdt();
 	if (ret)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index e3a3c54b6..ef3add999 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -17,6 +17,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -26,7 +27,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/time.h>
@@ -646,6 +647,7 @@ static struct davinci_spi_platform_data dm365_spi0_pdata = {
 	.version 	= SPI_VERSION_1,
 	.num_chipselect = 2,
 	.dma_event_q	= EVENTQ_3,
+	.prescaler_limit = 1,
 };
 
 static struct resource dm365_spi0_resources[] = {
@@ -852,8 +854,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 };
 
 /* Four Transfer Controllers on DM365 */
-static s8
-dm365_queue_priority_mapping[][2] = {
+static s8 dm365_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 7},
 	{1, 7},
@@ -862,53 +863,70 @@ dm365_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static const struct dma_slave_map dm365_edma_map[] = {
+	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
+	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
+	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
+	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
+	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
+	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
+	{ "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
+	{ "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
+	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
+	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
+	{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
+	{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
+};
+
+static struct edma_soc_info dm365_edma_pdata = {
 	.queue_priority_mapping	= dm365_queue_priority_mapping,
 	.default_queue		= EVENTQ_3,
-};
-
-static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
+	.slave_map		= dm365_edma_map,
+	.slavecnt		= ARRAY_SIZE(dm365_edma_map),
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc2",
 		.start	= 0x01c10800,
 		.end	= 0x01c10800 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc3",
+		.name	= "edma3_tc3",
 		.start	= 0x01c10c00,
 		.end	= 0x01c10c00 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -918,7 +936,7 @@ static struct resource edma_resources[] = {
 static struct platform_device dm365_edma_device = {
 	.name			= "edma",
 	.id			= 0,
-	.dev.platform_data	= dm365_edma_info,
+	.dev.platform_data	= &dm365_edma_pdata,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
@@ -1120,7 +1138,7 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.sram_len		= SZ_32K,
 };
 
-void __init dm365_init_asp(struct snd_platform_data *pdata)
+void __init dm365_init_asp(void)
 {
 	davinci_cfg_reg(DM365_MCBSP0_BDX);
 	davinci_cfg_reg(DM365_MCBSP0_X);
@@ -1130,15 +1148,13 @@ void __init dm365_init_asp(struct snd_platform_data *pdata)
 	davinci_cfg_reg(DM365_MCBSP0_BFSR);
 	davinci_cfg_reg(DM365_EVT2_ASP_TX);
 	davinci_cfg_reg(DM365_EVT3_ASP_RX);
-	dm365_asp_device.dev.platform_data = pdata;
 	platform_device_register(&dm365_asp_device);
 }
 
-void __init dm365_init_vc(struct snd_platform_data *pdata)
+void __init dm365_init_vc(void)
 {
 	davinci_cfg_reg(DM365_EVT2_VC_TX);
 	davinci_cfg_reg(DM365_EVT3_VC_RX);
-	dm365_vc_device.dev.platform_data = pdata;
 	platform_device_register(&dm365_vc_device);
 }
 
@@ -1158,6 +1174,7 @@ void __init dm365_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm365);
 	davinci_map_sysmod();
+	davinci_clk_init(davinci_soc_info_dm365.cpu_clks);
 }
 
 static struct resource dm365_vpss_resources[] = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index dc5265790..b437c3730 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
+#include <linux/dmaengine.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -19,7 +20,7 @@
 
 #include <mach/cputype.h>
 #include <mach/irqs.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/time.h>
 #include <mach/serial.h>
@@ -498,61 +499,69 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_priority_mapping[][2] = {
+static s8 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{1, 7},
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
+static const struct dma_slave_map dm644x_edma_map[] = {
+	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
+	{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
+	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
+	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
 };
 
-static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
+static struct edma_soc_info dm644x_edma_pdata = {
+	.queue_priority_mapping	= queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
+	.slave_map		= dm644x_edma_map,
+	.slavecnt		= ARRAY_SIZE(dm644x_edma_map),
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using TC*_ERR */
 };
 
-static struct platform_device dm644x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm644x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm644x_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm644x_edma_pdata,
+	.size_data	= sizeof(dm644x_edma_pdata),
 };
 
 /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
@@ -912,10 +921,9 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.sram_len		= SZ_16K,
 };
 
-void __init dm644x_init_asp(struct snd_platform_data *pdata)
+void __init dm644x_init_asp(void)
 {
 	davinci_cfg_reg(DM644X_MCBSP);
-	dm644x_asp_device.dev.platform_data = pdata;
 	platform_device_register(&dm644x_asp_device);
 }
 
@@ -923,6 +931,7 @@ void __init dm644x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm644x);
 	davinci_map_sysmod();
+	davinci_clk_init(davinci_soc_info_dm644x.cpu_clks);
 }
 
 int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
@@ -950,12 +959,17 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm644x_init_devices(void)
 {
+	struct platform_device *edma_pdev;
 	int ret = 0;
 
 	if (!cpu_is_davinci_dm644x())
 		return 0;
 
-	platform_device_register(&dm644x_edma_device);
+	edma_pdev = platform_device_register_full(&dm644x_edma_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
 
 	platform_device_register(&dm644x_mdio_device);
 	platform_device_register(&dm644x_emac_device);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 3f842bb26..da21353ca 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -9,6 +9,7 @@
  * or implied.
  */
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -20,7 +21,7 @@
 
 #include <mach/cputype.h>
 #include <mach/irqs.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/time.h>
 #include <mach/serial.h>
@@ -531,8 +532,7 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 /* Four Transfer Controllers on DM646x */
-static s8
-dm646x_queue_priority_mapping[][2] = {
+static s8 dm646x_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 4},
 	{1, 0},
@@ -541,65 +541,73 @@ dm646x_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
-	.queue_priority_mapping	= dm646x_queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
+static const struct dma_slave_map dm646x_edma_map[] = {
+	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) },
+	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) },
+	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) },
+	{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
+	{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
 };
 
-static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
+static struct edma_soc_info dm646x_edma_pdata = {
+	.queue_priority_mapping	= dm646x_queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
+	.slave_map		= dm646x_edma_map,
+	.slavecnt		= ARRAY_SIZE(dm646x_edma_map),
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc2",
 		.start	= 0x01c10800,
 		.end	= 0x01c10800 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc3",
+		.name	= "edma3_tc3",
 		.start	= 0x01c10c00,
 		.end	= 0x01c10c00 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using TC*_ERR */
 };
 
-static struct platform_device dm646x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm646x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm646x_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm646x_edma_pdata,
+	.size_data	= sizeof(dm646x_edma_pdata),
 };
 
 static struct resource dm646x_mcasp0_resources[] = {
@@ -936,15 +944,19 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config,
 
 int __init dm646x_init_edma(struct edma_rsv_info *rsv)
 {
-	edma_cc0_info.rsv = rsv;
+	struct platform_device *edma_pdev;
+
+	dm646x_edma_pdata.rsv = rsv;
 
-	return platform_device_register(&dm646x_edma_device);
+	edma_pdev = platform_device_register_full(&dm646x_edma_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);
 	davinci_map_sysmod();
+	davinci_clk_init(davinci_soc_info_dm646x.cpu_clks);
 }
 
 static int __init dm646x_init_devices(void)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 8fb97b93b..53b456a5b 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -30,7 +30,7 @@
 u32 *uart;
 
 /* PORT_16C550A, in polled non-fifo mode */
-static void putc(char c)
+static inline void putc(char c)
 {
 	if (!uart)
 		return;
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index 07e23ba61..8929569b1 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -21,7 +21,7 @@
 
 #include <mach/common.h>
 #include <mach/da8xx.h>
-#include <mach/sram.h>
+#include "sram.h"
 #include <mach/pm.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 82fdc69d5..e5dc6bfde 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 
 #include <mach/cputype.h>
-#include <mach/psc.h>
+#include "psc.h"
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/psc.h
index 99d47cfa3..8af9f09fc 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/psc.h
@@ -171,6 +171,8 @@
 #define DA8XX_LPSC1_I2C			11
 #define DA8XX_LPSC1_UART1		12
 #define DA8XX_LPSC1_UART2		13
+#define DA850_LPSC1_McBSP0		14
+#define DA850_LPSC1_McBSP1		15
 #define DA8XX_LPSC1_LCDC		16
 #define DA8XX_LPSC1_PWM			17
 #define DA850_LPSC1_MMC_SD1		18
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index a5336a5e2..cd350dee4 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -21,8 +21,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <mach/psc.h>
-#include <mach/ddr2.h>
+#include "psc.h"
+#include "ddr2.h"
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index 8540dddf1..668b6e749 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -14,7 +14,7 @@
 #include <linux/genalloc.h>
 
 #include <mach/common.h>
-#include <mach/sram.h>
+#include "sram.h"
 
 static struct gen_pool *sram_pool;
 
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/sram.h
index 4e5db5621..4e5db5621 100644
--- a/arch/arm/mach-davinci/include/mach/sram.h
+++ b/arch/arm/mach-davinci/sram.h
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 160c9602f..6c18445a4 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -303,36 +303,42 @@ static int davinci_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void davinci_set_mode(enum clock_event_mode mode,
-			     struct clock_event_device *evt)
+static int davinci_shutdown(struct clock_event_device *evt)
 {
 	struct timer_s *t = &timers[TID_CLOCKEVENT];
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		t->period = davinci_clock_tick_rate / (HZ);
-		t->opts &= ~TIMER_OPTS_STATE_MASK;
-		t->opts |= TIMER_OPTS_PERIODIC;
-		timer32_config(t);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		t->opts &= ~TIMER_OPTS_STATE_MASK;
-		t->opts |= TIMER_OPTS_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		t->opts &= ~TIMER_OPTS_STATE_MASK;
-		t->opts |= TIMER_OPTS_DISABLED;
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	t->opts &= ~TIMER_OPTS_STATE_MASK;
+	t->opts |= TIMER_OPTS_DISABLED;
+	return 0;
+}
+
+static int davinci_set_oneshot(struct clock_event_device *evt)
+{
+	struct timer_s *t = &timers[TID_CLOCKEVENT];
+
+	t->opts &= ~TIMER_OPTS_STATE_MASK;
+	t->opts |= TIMER_OPTS_ONESHOT;
+	return 0;
+}
+
+static int davinci_set_periodic(struct clock_event_device *evt)
+{
+	struct timer_s *t = &timers[TID_CLOCKEVENT];
+
+	t->period = davinci_clock_tick_rate / (HZ);
+	t->opts &= ~TIMER_OPTS_STATE_MASK;
+	t->opts |= TIMER_OPTS_PERIODIC;
+	timer32_config(t);
+	return 0;
 }
 
 static struct clock_event_device clockevent_davinci = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= davinci_set_next_event,
-	.set_mode	= davinci_set_mode,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= davinci_set_next_event,
+	.set_state_shutdown	= davinci_shutdown,
+	.set_state_periodic	= davinci_set_periodic,
+	.set_state_oneshot	= davinci_set_oneshot,
 };
 
 
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
new file mode 100644
index 000000000..f141f5171
--- /dev/null
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -0,0 +1,107 @@
+/*
+ * DA8xx USB
+ */
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
+
+#define DA8XX_USB0_BASE		0x01e00000
+#define DA8XX_USB1_BASE		0x01e25000
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= true,
+	.num_eps	= 5,
+	.ram_bits	= 10,
+};
+
+static struct musb_hdrc_platform_data usb_data = {
+	/* OTG requires a Mini-AB connector */
+	.mode           = MUSB_OTG,
+	.clock		= "usb20",
+	.config		= &musb_config,
+};
+
+static struct resource da8xx_usb20_resources[] = {
+	{
+		.start		= DA8XX_USB0_BASE,
+		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_DA8XX_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+		.name		= "mc",
+	},
+};
+
+static u64 usb_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device usb_dev = {
+	.name		= "musb-da8xx",
+	.id             = -1,
+	.dev = {
+		.platform_data		= &usb_data,
+		.dma_mask		= &usb_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+	.resource	= da8xx_usb20_resources,
+	.num_resources	= ARRAY_SIZE(da8xx_usb20_resources),
+};
+
+int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
+{
+	usb_data.power	= mA > 510 ? 255 : mA / 2;
+	usb_data.potpgt = (potpgt + 1) / 2;
+
+	return platform_device_register(&usb_dev);
+}
+
+#else
+
+int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
+{
+	return 0;
+}
+
+#endif  /* CONFIG_USB_MUSB_HDRC */
+
+static struct resource da8xx_usb11_resources[] = {
+	[0] = {
+		.start	= DA8XX_USB1_BASE,
+		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DA8XX_IRQN,
+		.end	= IRQ_DA8XX_IRQN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device da8xx_usb11_device = {
+	.name		= "ohci",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &da8xx_usb11_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
+	.resource	= da8xx_usb11_resources,
+};
+
+int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
+{
+	da8xx_usb11_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_usb11_device);
+}
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index b0a6b5225..0e7e89c1f 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -10,36 +10,16 @@
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
-#include <mach/da8xx.h>
 #include <linux/platform_data/usb-davinci.h>
 
 #define DAVINCI_USB_OTG_BASE	0x01c64000
 
-#define DA8XX_USB0_BASE 	0x01e00000
-#define DA8XX_USB1_BASE 	0x01e25000
-
 #if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct musb_hdrc_eps_bits musb_eps[] = {
-	{ "ep1_tx", 8, },
-	{ "ep1_rx", 8, },
-	{ "ep2_tx", 8, },
-	{ "ep2_rx", 8, },
-	{ "ep3_tx", 5, },
-	{ "ep3_rx", 5, },
-	{ "ep4_tx", 5, },
-	{ "ep4_rx", 5, },
-};
-
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= true,
-	.dyn_fifo	= true,
-	.soft_con	= true,
-	.dma		= true,
 
 	.num_eps	= 5,
-	.dma_channels	= 8,
 	.ram_bits	= 10,
-	.eps_bits	= musb_eps,
 };
 
 static struct musb_hdrc_platform_data usb_data = {
@@ -97,79 +77,10 @@ void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
 	platform_device_register(&usb_dev);
 }
 
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb20_resources[] = {
-	{
-		.start		= DA8XX_USB0_BASE,
-		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_DA8XX_USB_INT,
-		.flags		= IORESOURCE_IRQ,
-		.name		= "mc",
-	},
-};
-
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
-	usb_data.clock  = "usb20";
-	usb_data.power	= mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt + 1) / 2;
-
-	usb_dev.resource = da8xx_usb20_resources;
-	usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
-	usb_dev.name = "musb-da8xx";
-
-	return platform_device_register(&usb_dev);
-}
-#endif	/* CONFIG_DAVINCI_DA8XX */
-
 #else
 
 void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
 {
 }
 
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
-	return 0;
-}
-#endif
-
 #endif  /* CONFIG_USB_MUSB_HDRC */
-
-#ifdef	CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb11_resources[] = {
-	[0] = {
-		.start	= DA8XX_USB1_BASE,
-		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DA8XX_IRQN,
-		.end	= IRQ_DA8XX_IRQN,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb11_device = {
-	.name		= "ohci",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &da8xx_usb11_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
-	.resource	= da8xx_usb11_resources,
-};
-
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
-{
-	da8xx_usb11_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_usb11_device);
-}
-#endif	/* CONFIG_DAVINCI_DA8XX */
diff --git a/arch/arm/mach-digicolor/Kconfig b/arch/arm/mach-digicolor/Kconfig
index 4f36d8d2b..9d05c6c41 100644
--- a/arch/arm/mach-digicolor/Kconfig
+++ b/arch/arm/mach-digicolor/Kconfig
@@ -4,4 +4,7 @@ config ARCH_DIGICOLOR
 	select CLKSRC_MMIO
 	select DIGICOLOR_TIMER
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MFD_SYSCON
+	select PINCTRL
+	select PINCTRL_DIGICOLOR
diff --git a/arch/arm/mach-digicolor/digicolor.c b/arch/arm/mach-digicolor/digicolor.c
index cfc88d1ca..4d62f1bde 100644
--- a/arch/arm/mach-digicolor/digicolor.c
+++ b/arch/arm/mach-digicolor/digicolor.c
@@ -8,7 +8,7 @@
 
 #include <asm/mach/arch.h>
 
-static const char *digicolor_dt_compat[] __initconst = {
+static const char *const digicolor_dt_compat[] __initconst = {
 	"cnxt,cx92755",
 	NULL,
 };
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index d8c439c89..0bd6d894c 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -8,7 +8,7 @@ config DOVE_LEGACY
 config MACH_DOVE_DB
 	bool "Marvell DB-MV88AP510 Development Board"
 	select DOVE_LEGACY
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DB-MV88AP510 Development Board.
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 0dc39cf30..b9a7c33db 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -88,6 +88,7 @@ static void __init cm_a510_init(void)
 
 MACHINE_START(CM_A510, "Compulab CM-A510 Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= DOVE_NR_IRQS,
 	.init_machine	= cm_a510_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 0d1a89298..0d420a2bf 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -16,6 +16,7 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_device.h>
+#include <linux/soc/dove/pmu.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -87,8 +88,7 @@ static void __init dove_clk_init(void)
 	struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
 	struct clk *xor0, *xor1, *ge, *gephy;
 
-	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       dove_tclk);
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, dove_tclk);
 
 	usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0);
 	usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1);
@@ -375,6 +375,47 @@ void __init dove_setup_cpu_wins(void)
 				    DOVE_SCRATCHPAD_SIZE);
 }
 
+static struct resource orion_wdt_resource[] = {
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
+
+static struct platform_device orion_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
+	.resource	= orion_wdt_resource,
+};
+
+static void __init __maybe_unused orion_wdt_init(void)
+{
+	platform_device_register(&orion_wdt_device);
+}
+
+static const struct dove_pmu_domain_initdata pmu_domains[] __initconst = {
+	{
+		.pwr_mask = PMU_PWR_VPU_PWR_DWN_MASK,
+		.rst_mask = PMU_SW_RST_VIDEO_MASK,
+		.iso_mask = PMU_ISO_VIDEO_MASK,
+		.name = "vpu-domain",
+	}, {
+		.pwr_mask = PMU_PWR_GPU_PWR_DWN_MASK,
+		.rst_mask = PMU_SW_RST_GPU_MASK,
+		.iso_mask = PMU_ISO_GPU_MASK,
+		.name = "gpu-domain",
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct dove_pmu_initdata pmu_data __initconst = {
+	.pmc_base = DOVE_PMU_VIRT_BASE,
+	.pmu_base = DOVE_PMU_VIRT_BASE + 0x8000,
+	.irq = IRQ_DOVE_PMU,
+	.irq_domain_start = IRQ_DOVE_PMU_START,
+	.domains = pmu_domains,
+};
+
 void __init dove_init(void)
 {
 	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
@@ -389,6 +430,7 @@ void __init dove_init(void)
 	dove_clk_init();
 
 	/* internal devices that every board has */
+	dove_init_pmu_legacy(&pmu_data);
 	dove_rtc_init();
 	dove_xor0_init();
 	dove_xor1_init();
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 76e26f949..bcb678fd2 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,6 +94,7 @@ static void __init dove_db_init(void)
 
 MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= DOVE_NR_IRQS,
 	.init_machine	= dove_db_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index 0c4b35f4e..00f45458b 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_DOVE_H
 #define __ASM_ARCH_DOVE_H
 
+#include <mach/irqs.h>
+
 /*
  * Marvell Dove address maps.
  *
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
deleted file mode 100644
index 72d622baa..000000000
--- a/arch/arm/mach-dove/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Dove platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-
-	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #63
-	andeqs	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
index 3f29e6bca..8ff0fa8b4 100644
--- a/arch/arm/mach-dove/include/mach/irqs.h
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -90,7 +90,7 @@
 #define NR_PMU_IRQS		7
 #define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
 
-#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+#define DOVE_NR_IRQS		(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
 
 
 #endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
index b47f75038..d22b9b174 100644
--- a/arch/arm/mach-dove/include/mach/pm.h
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -51,22 +51,14 @@
 #define  CLOCK_GATING_GIGA_PHY_MASK	(1 << CLOCK_GATING_BIT_GIGA_PHY)
 
 #define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
-#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
 
-static inline int pmu_to_irq(int pin)
-{
-	if (pin < NR_PMU_IRQS)
-		return pin + IRQ_DOVE_PMU_START;
+#define  PMU_SW_RST_VIDEO_MASK		BIT(16)
+#define  PMU_SW_RST_GPU_MASK		BIT(18)
 
-	return -EINVAL;
-}
+#define  PMU_PWR_GPU_PWR_DWN_MASK	BIT(2)
+#define  PMU_PWR_VPU_PWR_DWN_MASK	BIT(3)
 
-static inline int irq_to_pmu(int irq)
-{
-	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
-		return irq - IRQ_DOVE_PMU_START;
-
-	return -EINVAL;
-}
+#define  PMU_ISO_VIDEO_MASK		BIT(0)
+#define  PMU_ISO_GPU_MASK		BIT(1)
 
 #endif
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index df0223f76..d6627c1f7 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -7,86 +7,15 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
-#include <asm/mach/arch.h>
+#include <asm/exception.h>
 #include <plat/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/pm.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
 
-static void pmu_irq_mask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u &= ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_unmask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u |= 1 << (pin & 31);
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_ack(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	/*
-	 * The PMU mask register is not RW0C: it is RW.  This means that
-	 * the bits take whatever value is written to them; if you write
-	 * a '1', you will set the interrupt.
-	 *
-	 * Unfortunately this means there is NO race free way to clear
-	 * these interrupts.
-	 *
-	 * So, let's structure the code so that the window is as small as
-	 * possible.
-	 */
-	u = ~(1 << (pin & 31));
-	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
-	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
-}
-
-static struct irq_chip pmu_irq_chip = {
-	.name		= "pmu_irq",
-	.irq_mask	= pmu_irq_mask,
-	.irq_unmask	= pmu_irq_unmask,
-	.irq_ack	= pmu_irq_ack,
-};
-
-static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
-
-	cause &= readl(PMU_INTERRUPT_MASK);
-	if (cause == 0) {
-		do_bad_IRQ(irq, desc);
-		return;
-	}
-
-	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
-		if (!(cause & (1 << irq)))
-			continue;
-		irq = pmu_to_irq(irq);
-		generic_handle_irq(irq);
-	}
-}
-
 static int __initdata gpio0_irqs[4] = {
 	IRQ_DOVE_GPIO_0_7,
 	IRQ_DOVE_GPIO_8_15,
@@ -108,14 +37,6 @@ static int __initdata gpio2_irqs[4] = {
 	0,
 };
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
 static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
 
 static asmlinkage void
@@ -138,18 +59,13 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
 		return;
 	}
 }
-#endif
 
 void __init dove_init_irq(void)
 {
-	int i;
-
 	orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(dove_legacy_handle_irq);
-#endif
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
@@ -162,17 +78,4 @@ void __init dove_init_irq(void)
 
 	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
-
-	/*
-	 * Mask and clear PMU interrupts
-	 */
-	writel(0, PMU_INTERRUPT_MASK);
-	writel(0, PMU_INTERRUPT_CAUSE);
-
-	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
 }
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 8254e716b..688e5fed4 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -65,7 +65,7 @@ static void __init ebsa110_init_irq(void)
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		irq_set_chip_and_handler(irq, &ebsa110_irq_chip,
 					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 }
 
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index bec570ae6..61a75ca36 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -15,45 +15,8 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
-choice
-	prompt "EP93xx first SDRAM bank selection"
-	default EP93XX_SDCE3_SYNC_PHYS_OFFSET
-
-config EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	bool "0x00000000 - SDCE3/SyncBoot"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0x00000000.
-
-config EP93XX_SDCE0_PHYS_OFFSET
-	bool "0xc0000000 - SDCEO"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xc0000000.
-
-config EP93XX_SDCE1_PHYS_OFFSET
-	bool "0xd0000000 - SDCE1"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xd0000000.
-
-config EP93XX_SDCE2_PHYS_OFFSET
-	bool "0xe0000000 - SDCE2"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xe0000000.
-
-config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-	bool "0xf0000000 - SDCE3/AsyncBoot"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xf0000000.
-
-endchoice
-
 config MACH_ADSSPHERE
 	bool "Support ADS Sphere"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
@@ -63,7 +26,6 @@ config MACH_EDB93XX
 
 config MACH_EDB9301
 	bool "Support Cirrus Logic EDB9301"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -71,7 +33,6 @@ config MACH_EDB9301
 
 config MACH_EDB9302
 	bool "Support Cirrus Logic EDB9302"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -79,7 +40,6 @@ config MACH_EDB9302
 
 config MACH_EDB9302A
 	bool "Support Cirrus Logic EDB9302A"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -87,7 +47,6 @@ config MACH_EDB9302A
 
 config MACH_EDB9307
 	bool "Support Cirrus Logic EDB9307"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -95,7 +54,6 @@ config MACH_EDB9307
 
 config MACH_EDB9307A
 	bool "Support Cirrus Logic EDB9307A"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -103,7 +61,6 @@ config MACH_EDB9307A
 
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -111,7 +68,6 @@ config MACH_EDB9312
 
 config MACH_EDB9315
 	bool "Support Cirrus Logic EDB9315"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -119,14 +75,12 @@ config MACH_EDB9315
 
 config MACH_EDB9315A
 	bool "Support Cirrus Logic EDB9315A"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
 config MACH_GESBC9312
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "Support Glomation GESBC-9312-sx"
 	help
 	  Say 'Y' here if you want your kernel to support the Glomation
@@ -137,7 +91,6 @@ config MACH_MICRO9
 
 config MACH_MICRO9H
 	bool "Support Contec Micro9-High"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -145,7 +98,6 @@ config MACH_MICRO9H
 
 config MACH_MICRO9M
 	bool "Support Contec Micro9-Mid"
-	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -153,7 +105,6 @@ config MACH_MICRO9M
 
 config MACH_MICRO9L
 	bool "Support Contec Micro9-Lite"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -161,7 +112,6 @@ config MACH_MICRO9L
 
 config MACH_MICRO9S
 	bool "Support Contec Micro9-Slim"
-	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -169,28 +119,24 @@ config MACH_MICRO9S
 
 config MACH_SIM_ONE
         bool "Support Simplemachines Sim.One board"
-        depends on EP93XX_SDCE0_PHYS_OFFSET
         help
           Say 'Y' here if you want your kernel to support the
           Simplemachines Sim.One board.
 
 config MACH_SNAPPER_CL15
 	bool "Support Bluewater Systems Snapper CL15 Module"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the Bluewater
 	  Systems Snapper CL15 Module.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
 
 config MACH_VISION_EP9307
 	bool "Support Vision Engraving Systems EP9307 SoM"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Vision Engraving Systems EP9307 SoM.
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 78d427b34..b7ae4345a 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
-obj-y			:= core.o clock.o
+obj-y			:= core.o clock.o timer-ep93xx.o
 
 obj-$(CONFIG_EP93XX_DMA)	+= dma.o
 
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index d3113a71c..ed82ed7c9 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -1,14 +1 @@
-   zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	+= 0x00008000
-params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
-
-   zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		+= 0xc0008000
-params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
-
-   zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		+= 0xd0008000
-params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0000100
-
-   zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		+= 0xe0008000
-params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0000100
-
-   zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	+= 0xf0008000
-params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0000100
+# Empty file waiting for deletion once Makefile.boot isn't needed any more.
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 0e571f174..c393b1b03 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -22,7 +22,6 @@
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/sys_soc.h>
-#include <linux/timex.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -38,6 +37,7 @@
 #include <linux/irqchip/arm-vic.h>
 #include <linux/reboot.h>
 #include <linux/usb/ohci_pdriver.h>
+#include <linux/random.h>
 
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>
@@ -47,7 +47,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "soc.h"
 
@@ -73,113 +72,6 @@ void __init ep93xx_map_io(void)
 	iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
 }
 
-
-/*************************************************************************
- * Timer handling for EP93xx
- *************************************************************************
- * The ep93xx has four internal timers.  Timers 1, 2 (both 16 bit) and
- * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
- * an interrupt on underflow.  Timer 4 (40 bit) counts down at 983.04 kHz,
- * is free-running, and can't generate interrupts.
- *
- * The 508 kHz timers are ideal for use for the timer interrupt, as the
- * most common values of HZ divide 508 kHz nicely.  We pick one of the 16
- * bit timers (timer 1) since we don't need more than 16 bits of reload
- * value as long as HZ >= 8.
- *
- * The higher clock rate of timer 4 makes it a better choice than the
- * other timers for use in gettimeoffset(), while the fact that it can't
- * generate interrupts means we don't have to worry about not being able
- * to use this timer for something else.  We also use timer 4 for keeping
- * track of lost jiffies.
- */
-#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER123_CONTROL_ENABLE	(1 << 7)
-#define EP93XX_TIMER123_CONTROL_MODE	(1 << 6)
-#define EP93XX_TIMER123_CONTROL_CLKSEL	(1 << 3)
-#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER4_VALUE_HIGH_ENABLE	(1 << 8)
-#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_TIMER123_CLOCK		508469
-#define EP93XX_TIMER4_CLOCK		983040
-
-#define TIMER1_RELOAD			((EP93XX_TIMER123_CLOCK / HZ) - 1)
-#define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ)
-
-static unsigned int last_jiffy_time;
-
-static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
-{
-	/* Writing any value clears the timer interrupt */
-	__raw_writel(1, EP93XX_TIMER1_CLEAR);
-
-	/* Recover lost jiffies */
-	while ((signed long)
-		(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
-						>= TIMER4_TICKS_PER_JIFFY) {
-		last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
-		timer_tick();
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ep93xx_timer_irq = {
-	.name		= "ep93xx timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ep93xx_timer_interrupt,
-};
-
-static u32 ep93xx_gettimeoffset(void)
-{
-	int offset;
-
-	offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
-
-	/*
-	 * Timer 4 is based on a 983.04 kHz reference clock,
-	 * so dividing by 983040 gives the fraction of a second,
-	 * so dividing by 0.983040 converts to uS.
-	 * Refactor the calculation to avoid overflow.
-	 * Finally, multiply by 1000 to give nS.
-	 */
-	return (offset + (53 * offset / 3072)) * 1000;
-}
-
-void __init ep93xx_timer_init(void)
-{
-	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
-		    EP93XX_TIMER123_CONTROL_CLKSEL;
-
-	arch_gettimeoffset = ep93xx_gettimeoffset;
-
-	/* Enable periodic HZ timer.  */
-	__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
-	__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
-	__raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
-			EP93XX_TIMER1_CONTROL);
-
-	/* Enable lost jiffy timer.  */
-	__raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
-			EP93XX_TIMER4_VALUE_HIGH);
-
-	setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
-}
-
-
 /*************************************************************************
  * EP93xx IRQ handling
  *************************************************************************/
@@ -971,6 +863,12 @@ static const char __init *ep93xx_get_soc_id(void)
 	if (id != id2)
 		return "invalid";
 
+	/* Toss the unique ID into the entropy pool */
+	add_device_randomness(&id2, 4);
+	add_device_randomness(&id3, 4);
+	add_device_randomness(&id4, 4);
+	add_device_randomness(&id5, 4);
+
 	snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id),
 		 "%08x%08x%08x%08x", id2, id3, id4, id5);
 
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 27b14ae92..ad92d9f7e 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -205,8 +205,6 @@ static void __init edb93xx_register_pwm(void)
  * EDB93xx framebuffer
  *************************************************************************/
 static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
-	.num_modes	= EP93XXFB_USE_MODEDB,
-	.bpp		= 16,
 	.flags		= 0,
 };
 
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 3c950f586..7bb540c42 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -40,8 +40,6 @@ static struct ep93xx_eth_data __initdata simone_eth_data = {
 };
 
 static struct ep93xxfb_mach_info __initdata simone_fb_info = {
-	.num_modes	= EP93XXFB_USE_MODEDB,
-	.bpp		= 16,
 	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
 };
 
@@ -169,6 +167,7 @@ static struct spi_board_info simone_spi_devices[] __initdata = {
 
 static struct ep93xx_spi_info simone_spi_info __initdata = {
 	.num_chipselect	= ARRAY_SIZE(simone_spi_devices),
+	.use_dma = 1,
 };
 
 static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index aa86f8663..b2db791b3 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -49,7 +49,7 @@
 static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 				      unsigned int ctrl)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 	static u16 nand_state = SNAPPERCL15_NAND_WPN;
 	u16 set;
 
@@ -76,7 +76,7 @@ static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 
 static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 
 	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
 }
@@ -144,8 +144,6 @@ static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
 };
 
 static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
-	.num_modes		= EP93XXFB_USE_MODEDB,
-	.bpp			= 16,
 };
 
 static struct platform_device snappercl15_audio_device = {
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
new file mode 100644
index 000000000..e5f791145
--- /dev/null
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -0,0 +1,143 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/sched_clock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/mach/time.h>
+#include "soc.h"
+
+/*************************************************************************
+ * Timer handling for EP93xx
+ *************************************************************************
+ * The ep93xx has four internal timers.  Timers 1, 2 (both 16 bit) and
+ * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
+ * an interrupt on underflow.  Timer 4 (40 bit) counts down at 983.04 kHz,
+ * is free-running, and can't generate interrupts.
+ *
+ * The 508 kHz timers are ideal for use for the timer interrupt, as the
+ * most common values of HZ divide 508 kHz nicely.  We pick the 32 bit
+ * timer (timer 3) to get as long sleep intervals as possible when using
+ * CONFIG_NO_HZ.
+ *
+ * The higher clock rate of timer 4 makes it a better choice than the
+ * other timers for use as clock source and for sched_clock(), providing
+ * a stable 40 bit time base.
+ *************************************************************************
+ */
+#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER123_CONTROL_ENABLE	(1 << 7)
+#define EP93XX_TIMER123_CONTROL_MODE	(1 << 6)
+#define EP93XX_TIMER123_CONTROL_CLKSEL	(1 << 3)
+#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER4_VALUE_HIGH_ENABLE	(1 << 8)
+#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_TIMER123_RATE		508469
+#define EP93XX_TIMER4_RATE		983040
+
+static u64 notrace ep93xx_read_sched_clock(void)
+{
+	u64 ret;
+
+	ret = readl(EP93XX_TIMER4_VALUE_LOW);
+	ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
+	return ret;
+}
+
+cycle_t ep93xx_clocksource_read(struct clocksource *c)
+{
+	u64 ret;
+
+	ret = readl(EP93XX_TIMER4_VALUE_LOW);
+	ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
+	return (cycle_t) ret;
+}
+
+static int ep93xx_clkevt_set_next_event(unsigned long next,
+					struct clock_event_device *evt)
+{
+	/* Default mode: periodic, off, 508 kHz */
+	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
+		    EP93XX_TIMER123_CONTROL_CLKSEL;
+
+	/* Clear timer */
+	writel(tmode, EP93XX_TIMER3_CONTROL);
+
+	/* Set next event */
+	writel(next, EP93XX_TIMER3_LOAD);
+	writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
+	       EP93XX_TIMER3_CONTROL);
+        return 0;
+}
+
+
+static int ep93xx_clkevt_shutdown(struct clock_event_device *evt)
+{
+	/* Disable timer */
+	writel(0, EP93XX_TIMER3_CONTROL);
+
+	return 0;
+}
+
+static struct clock_event_device ep93xx_clockevent = {
+	.name			= "timer1",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= ep93xx_clkevt_shutdown,
+	.set_state_oneshot	= ep93xx_clkevt_shutdown,
+	.tick_resume		= ep93xx_clkevt_shutdown,
+	.set_next_event		= ep93xx_clkevt_set_next_event,
+	.rating			= 300,
+};
+
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/* Writing any value clears the timer interrupt */
+	writel(1, EP93XX_TIMER3_CLEAR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction ep93xx_timer_irq = {
+	.name		= "ep93xx timer",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= ep93xx_timer_interrupt,
+	.dev_id		= &ep93xx_clockevent,
+};
+
+void __init ep93xx_timer_init(void)
+{
+	/* Enable and register clocksource and sched_clock on timer 4 */
+	writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
+	       EP93XX_TIMER4_VALUE_HIGH);
+	clocksource_mmio_init(NULL, "timer4",
+			      EP93XX_TIMER4_RATE, 200, 40,
+			      ep93xx_clocksource_read);
+	sched_clock_register(ep93xx_read_sched_clock, 40,
+			     EP93XX_TIMER4_RATE);
+
+	/* Set up clockevent on timer 3 */
+	setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
+	clockevents_config_and_register(&ep93xx_clockevent,
+					EP93XX_TIMER123_RATE,
+					1,
+					0xffffffffU);
+}
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 61f4b5dc4..3b39ea353 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/m48t86.h>
+#include <linux/platform_data/rtc-m48t86.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
@@ -74,7 +74,7 @@ static void __init ts72xx_map_io(void)
 static void ts72xx_nand_hwcontrol(struct mtd_info *mtd,
 				  int cmd, unsigned int ctrl)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		void __iomem *addr = chip->IO_ADDR_R;
@@ -96,7 +96,7 @@ static void ts72xx_nand_hwcontrol(struct mtd_info *mtd,
 
 static int ts72xx_nand_device_ready(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 	void __iomem *addr = chip->IO_ADDR_R;
 
 	addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 6bc1c1815..5cced5988 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -29,6 +29,8 @@
 #include <linux/spi/mmc_spi.h>
 #include <linux/mmc/host.h>
 
+#include <sound/cs4271.h>
+
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>
 #include <linux/platform_data/spi-ep93xx.h>
@@ -104,8 +106,6 @@ static void vision_lcd_blank(int blank_mode, struct fb_info *info)
 }
 
 static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
-	.num_modes	= EP93XXFB_USE_MODEDB,
-	.bpp		= 16,
 	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
 	.setup		= vision_lcd_setup,
 	.teardown	= vision_lcd_teardown,
@@ -169,6 +169,35 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
 };
 
 /*************************************************************************
+ * SPI CS4271 Audio Codec
+ *************************************************************************/
+static struct cs4271_platform_data vision_cs4271_data = {
+	.gpio_nreset	= EP93XX_GPIO_LINE_H(2),
+};
+
+static int vision_cs4271_hw_setup(struct spi_device *spi)
+{
+	return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
+				GPIOF_OUT_INIT_HIGH, spi->modalias);
+}
+
+static void vision_cs4271_hw_cleanup(struct spi_device *spi)
+{
+	gpio_free(EP93XX_GPIO_LINE_EGPIO6);
+}
+
+static void vision_cs4271_hw_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_cs4271_hw = {
+	.setup		= vision_cs4271_hw_setup,
+	.cleanup	= vision_cs4271_hw_cleanup,
+	.cs_control	= vision_cs4271_hw_cs_control,
+};
+
+/*************************************************************************
  * SPI Flash
  *************************************************************************/
 #define VISION_SPI_FLASH_CS	EP93XX_GPIO_LINE_EGPIO7
@@ -262,12 +291,20 @@ static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
  *************************************************************************/
 static struct spi_board_info vision_spi_board_info[] __initdata = {
 	{
+		.modalias		= "cs4271",
+		.platform_data		= &vision_cs4271_data,
+		.controller_data	= &vision_cs4271_hw,
+		.max_speed_hz		= 6000000,
+		.bus_num		= 0,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_3,
+	}, {
 		.modalias		= "sst25l",
 		.platform_data		= &vision_spi_flash_data,
 		.controller_data	= &vision_spi_flash_hw,
 		.max_speed_hz		= 20000000,
 		.bus_num		= 0,
-		.chip_select		= 0,
+		.chip_select		= 1,
 		.mode			= SPI_MODE_3,
 	}, {
 		.modalias		= "mmc_spi",
@@ -275,16 +312,31 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 		.controller_data	= &vision_spi_mmc_hw,
 		.max_speed_hz		= 20000000,
 		.bus_num		= 0,
-		.chip_select		= 1,
+		.chip_select		= 2,
 		.mode			= SPI_MODE_3,
 	},
 };
 
 static struct ep93xx_spi_info vision_spi_master __initdata = {
-	.num_chipselect		= ARRAY_SIZE(vision_spi_board_info),
+	.num_chipselect	= ARRAY_SIZE(vision_spi_board_info),
+	.use_dma	= 1,
 };
 
 /*************************************************************************
+ * I2S Audio
+ *************************************************************************/
+static struct platform_device vision_audio_device = {
+	.name		= "edb93xx-audio",
+	.id		= -1,
+};
+
+static void __init vision_register_i2s(void)
+{
+	ep93xx_register_i2s();
+	platform_device_register(&vision_audio_device);
+}
+
+/*************************************************************************
  * Machine Initialization
  *************************************************************************/
 static void __init vision_init_machine(void)
@@ -309,6 +361,7 @@ static void __init vision_init_machine(void)
 				ARRAY_SIZE(vision_i2c_info));
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
 				ARRAY_SIZE(vision_spi_board_info));
+	vision_register_i2s();
 }
 
 MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 81064cd61..8f820de89 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -5,16 +5,21 @@
 #
 # Licensed under GPLv2
 
-# Configuration options for the EXYNOS4
+# Configuration options for the EXYNOS
 
 menuconfig ARCH_EXYNOS
-	bool "Samsung EXYNOS" if ARCH_MULTI_V7
+	bool "Samsung EXYNOS"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select COMMON_CLK_SAMSUNG
+	select EXYNOS_THERMAL
+	select EXYNOS_PMU
+	select EXYNOS_SROM
+	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -23,13 +28,27 @@ menuconfig ARCH_EXYNOS
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM
 	select S5P_DEV_MFC
+	select SAMSUNG_MC
+	select SOC_SAMSUNG
 	select SRAM
+	select THERMAL
+	select THERMAL_OF
 	select MFD_SYSCON
+	select MEMORY
+	select CLKSRC_EXYNOS_MCT
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	select POWER_RESET_SYSCON_POWEROFF
 	help
 	  Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
 
 if ARCH_EXYNOS
 
+config S5P_DEV_MFC
+	bool
+	help
+	  Compile in setup memory (init) code for MFC
+
 config ARCH_EXYNOS3
 	bool "SAMSUNG EXYNOS3"
 	select ARM_CPU_SUSPEND if PM
@@ -43,7 +62,6 @@ config ARCH_EXYNOS4
 	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
 	select CPU_EXYNOS4210
 	select GIC_NON_BANKED
-	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 (Cortex-A9) SoC based systems
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index bcefb5473..9ea6c5464 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -9,11 +9,10 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)
 
 # Core
 
-obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o exynos-smc.o firmware.o
 
 obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
 obj-$(CONFIG_PM_SLEEP)		+= suspend.o
-obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
deleted file mode 100644
index b9862e22b..000000000
--- a/arch/arm/mach-exynos/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x40008000
-params_phys-y	:= 0x40000100
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index e3a9256ed..9424a8a9f 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,7 +12,6 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-#include <linux/of.h>
 #include <linux/platform_data/cpuidle-exynos.h>
 
 #define EXYNOS3250_SOC_ID	0xE3472000
@@ -128,6 +127,12 @@ void exynos_firmware_init(void);
 
 /* CPU BOOT mode flag for Exynos3250 SoC bootloader */
 #define C2_STATE	(1 << 3)
+/*
+ * Magic values for bootloader indicating chosen low power mode.
+ * See also Documentation/arm/Samsung/Bootloader-interface.txt
+ */
+#define EXYNOS_SLEEP_MAGIC	0x00000bad
+#define EXYNOS_AFTR_MAGIC	0xfcba0d10
 
 void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
 void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
@@ -143,7 +148,7 @@ static inline void exynos_pm_init(void) {}
 extern void exynos_cpu_resume(void);
 extern void exynos_cpu_resume_ns(void);
 
-extern struct smp_operations exynos_smp_ops;
+extern const struct smp_operations exynos_smp_ops;
 
 extern void exynos_cpu_power_down(int cpu);
 extern void exynos_cpu_power_up(int cpu);
@@ -161,7 +166,6 @@ extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
 
 extern void exynos_set_delayed_reset_assertion(bool enable);
 
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
 extern unsigned int samsung_rev(void);
 extern void exynos_core_restart(u32 core_id);
 extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
@@ -169,12 +173,12 @@ extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
 
 static inline void pmu_raw_writel(u32 val, u32 offset)
 {
-	__raw_writel(val, pmu_base_addr + offset);
+	writel_relaxed(val, pmu_base_addr + offset);
 }
 
 static inline u32 pmu_raw_readl(u32 offset)
 {
-	return __raw_readl(pmu_base_addr + offset);
+	return readl_relaxed(pmu_base_addr + offset);
 }
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/exynos-pmu.h b/arch/arm/mach-exynos/exynos-pmu.h
deleted file mode 100644
index a2ab0d52b..000000000
--- a/arch/arm/mach-exynos/exynos-pmu.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header for EXYNOS PMU Driver support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __EXYNOS_PMU_H
-#define __EXYNOS_PMU_H
-
-enum sys_powerdown {
-	SYS_AFTR,
-	SYS_LPA,
-	SYS_SLEEP,
-	NUM_SYS_POWERDOWN,
-};
-
-extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-
-#endif /* __EXYNOS_PMU_H */
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 5f8ddcdee..acabf0bff 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -11,37 +11,25 @@
 
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/serial_s3c.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/pm_domain.h>
 #include <linux/irqchip.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/memory.h>
 
 #include <mach/map.h>
+#include <plat/cpu.h>
 
 #include "common.h"
-#include "mfc.h"
-#include "regs-pmu.h"
-
-void __iomem *pmu_base_addr;
 
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
 		.length		= SZ_128K,
@@ -64,20 +52,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 	},
 };
 
-static struct map_desc exynos5_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_CMU),
-		.length		= 144 * SZ_1K,
-		.type		= MT_DEVICE,
-	},
-};
-
 static struct platform_device exynos_cpuidle = {
 	.name              = "exynos_cpuidle",
 #ifdef CONFIG_ARM_EXYNOS_CPUIDLE
@@ -149,9 +123,6 @@ static void __init exynos_map_io(void)
 {
 	if (soc_is_exynos4())
 		iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
-	if (soc_is_exynos5())
-		iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
 }
 
 static void __init exynos_init_io(void)
@@ -224,25 +195,6 @@ static void __init exynos_init_irq(void)
 	exynos_map_pmu();
 }
 
-static const struct of_device_id exynos_cpufreq_matches[] = {
-	{ .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
-	{ /* sentinel */ }
-};
-
-static void __init exynos_cpufreq_init(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	const struct of_device_id *match;
-
-	match = of_match_node(exynos_cpufreq_matches, root);
-	if (!match) {
-		platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
-		return;
-	}
-
-	platform_device_register_simple(match->data, -1, NULL, 0);
-}
-
 static void __init exynos_dt_machine_init(void)
 {
 	/*
@@ -264,10 +216,6 @@ static void __init exynos_dt_machine_init(void)
 	    of_machine_is_compatible("samsung,exynos3250") ||
 	    of_machine_is_compatible("samsung,exynos5250"))
 		platform_device_register(&exynos_cpuidle);
-
-	exynos_cpufreq_init();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static char const *const exynos_dt_compat[] __initconst = {
@@ -286,23 +234,6 @@ static char const *const exynos_dt_compat[] __initconst = {
 	NULL
 };
 
-static void __init exynos_reserve(void)
-{
-#ifdef CONFIG_S5P_DEV_MFC
-	int i;
-	char *mfc_mem[] = {
-		"samsung,mfc-v5",
-		"samsung,mfc-v6",
-		"samsung,mfc-v7",
-		"samsung,mfc-v8",
-	};
-
-	for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
-		if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
-			break;
-#endif
-}
-
 static void __init exynos_dt_fixup(void)
 {
 	/*
@@ -324,6 +255,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	.init_machine	= exynos_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.dt_compat	= exynos_dt_compat,
-	.reserve	= exynos_reserve,
 	.dt_fixup	= exynos_dt_fixup,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 245f6dec1..fd6da5419 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -20,13 +20,9 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/suspend.h>
 
-#include <mach/map.h>
-
 #include "common.h"
 #include "smc.h"
 
-#define EXYNOS_SLEEP_MAGIC	0x00000bad
-#define EXYNOS_AFTR_MAGIC	0xfcba0d10
 #define EXYNOS_BOOT_ADDR	0x8
 #define EXYNOS_BOOT_FLAG	0xc
 
@@ -45,9 +41,9 @@ static int exynos_do_idle(unsigned long mode)
 	case FW_DO_IDLE_AFTR:
 		if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
 			exynos_save_cp15();
-		__raw_writel(virt_to_phys(exynos_cpu_resume_ns),
-			     sysram_ns_base_addr + 0x24);
-		__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
+		writel_relaxed(virt_to_phys(exynos_cpu_resume_ns),
+			       sysram_ns_base_addr + 0x24);
+		writel_relaxed(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
 		if (soc_is_exynos3250()) {
 			flush_cache_all();
 			exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
@@ -101,7 +97,7 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 	if (soc_is_exynos4412())
 		boot_reg += 4 * cpu;
 
-	__raw_writel(boot_addr, boot_reg);
+	writel_relaxed(boot_addr, boot_reg);
 	return 0;
 }
 
@@ -117,7 +113,7 @@ static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
 	if (soc_is_exynos4412())
 		boot_reg += 4 * cpu;
 
-	*boot_addr = __raw_readl(boot_reg);
+	*boot_addr = readl_relaxed(boot_reg);
 	return 0;
 }
 
@@ -238,20 +234,20 @@ void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
 {
 	unsigned int tmp;
 
-	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+	tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
 
 	if (mode & BOOT_MODE_MASK)
 		tmp &= ~BOOT_MODE_MASK;
 
 	tmp |= mode;
-	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+	writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
 }
 
 void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
 {
 	unsigned int tmp;
 
-	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+	tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
 	tmp &= ~mode;
-	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+	writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
 }
diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S
index b54f9701e..d3d24ab35 100644
--- a/arch/arm/mach-exynos/headsmp.S
+++ b/arch/arm/mach-exynos/headsmp.S
@@ -12,12 +12,15 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+#include <asm/assembler.h>
+
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're
  * ready for them to initialise.
  */
 ENTRY(exynos4_secondary_startup)
+ARM_BE8(setend	be)
 	mrc	p15, 0, r0, c0, c0, 5
 	and	r0, r0, #15
 	adr	r4, 1f
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index de3ae59e1..c48ba4fbd 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -2,7 +2,7 @@
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
- * EXYNOS4 - Memory map definitions
+ * EXYNOS - Memory map definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,30 +14,15 @@
 
 #include <plat/map-base.h>
 
-/*
- * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400.
- * So need to define it, and here is to avoid redefinition warning.
- */
-#define S3C_UART_OFFSET			(0x10000)
-
 #include <plat/map-s5p.h>
 
 #define EXYNOS_PA_CHIPID		0x10000000
 
 #define EXYNOS4_PA_CMU			0x10030000
-#define EXYNOS5_PA_CMU			0x10010000
 
 #define EXYNOS4_PA_DMC0			0x10400000
 #define EXYNOS4_PA_DMC1			0x10410000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
-#define EXYNOS4_PA_L2CC			0x10502000
-
-#define EXYNOS4_PA_SROMC		0x12570000
-#define EXYNOS5_PA_SROMC		0x12250000
-
-/* Compatibility UART */
-
-#define EXYNOS5440_PA_UART0		0x000B0000
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index 9bdf54795..f086bf615 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -16,12 +16,13 @@
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/syscore_ops.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 #include <asm/cputype.h>
 #include <asm/cp15.h>
 #include <asm/mcpm.h>
+#include <asm/smp_plat.h>
 
-#include "regs-pmu.h"
 #include "common.h"
 
 #define EXYNOS5420_CPUS_PER_CLUSTER	4
@@ -70,7 +71,31 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 		cluster >= EXYNOS5420_NR_CLUSTERS)
 		return -EINVAL;
 
-	exynos_cpu_power_up(cpunr);
+	if (!exynos_cpu_power_state(cpunr)) {
+		exynos_cpu_power_up(cpunr);
+
+		/*
+		 * This assumes the cluster number of the big cores(Cortex A15)
+		 * is 0 and the Little cores(Cortex A7) is 1.
+		 * When the system was booted from the Little core,
+		 * they should be reset during power up cpu.
+		 */
+		if (cluster &&
+		    cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
+			/*
+			 * Before we reset the Little cores, we should wait
+			 * the SPARE2 register is set to 1 because the init
+			 * codes of the iROM will set the register after
+			 * initialization.
+			 */
+			while (!pmu_raw_readl(S5P_PMU_SPARE2))
+				udelay(10);
+
+			pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
+					EXYNOS_SWRESET);
+		}
+	}
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-exynos/mfc.h b/arch/arm/mach-exynos/mfc.h
deleted file mode 100644
index dec93cd5b..000000000
--- a/arch/arm/mach-exynos/mfc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2013 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_MFC_H
-#define __MACH_EXYNOS_MFC_H __FILE__
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
-				int depth, void *data);
-
-#endif /* __MACH_EXYNOS_MFC_H */
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 58e05a2ea..98ffe1e62 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -15,11 +15,11 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
@@ -30,7 +30,6 @@
 #include <mach/map.h>
 
 #include "common.h"
-#include "regs-pmu.h"
 
 extern void exynos4_secondary_startup(void);
 
@@ -182,7 +181,7 @@ static inline void __iomem *cpu_boot_reg(int cpu)
 
 	boot_reg = cpu_boot_reg_base();
 	if (!boot_reg)
-		return ERR_PTR(-ENODEV);
+		return IOMEM_ERR_PTR(-ENODEV);
 	if (soc_is_exynos4412())
 		boot_reg += 4*cpu;
 	else if (soc_is_exynos5420() || soc_is_exynos5800())
@@ -265,7 +264,7 @@ int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr)
 			ret = PTR_ERR(boot_reg);
 			goto fail;
 		}
-		__raw_writel(boot_addr, boot_reg);
+		writel_relaxed(boot_addr, boot_reg);
 		ret = 0;
 	}
 fail:
@@ -290,7 +289,7 @@ int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
 			ret = PTR_ERR(boot_reg);
 			goto fail;
 		}
-		*boot_addr = __raw_readl(boot_reg);
+		*boot_addr = readl_relaxed(boot_reg);
 		ret = 0;
 	}
 fail:
@@ -479,7 +478,7 @@ static void exynos_cpu_die(unsigned int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-struct smp_operations exynos_smp_ops __initdata = {
+const struct smp_operations exynos_smp_ops __initconst = {
 	.smp_init_cpus		= exynos_smp_init_cpus,
 	.smp_prepare_cpus	= exynos_smp_prepare_cpus,
 	.smp_secondary_init	= exynos_secondary_init,
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 9c1506b49..487295f4a 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -17,7 +17,9 @@
 #include <linux/suspend.h>
 #include <linux/cpu_pm.h>
 #include <linux/io.h>
-#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
 
 #include <asm/firmware.h>
 #include <asm/smp_scu.h>
@@ -26,11 +28,7 @@
 
 #include <mach/map.h>
 
-#include <plat/pm-common.h>
-
 #include "common.h"
-#include "exynos-pmu.h"
-#include "regs-pmu.h"
 
 static inline void __iomem *exynos_boot_vector_addr(void)
 {
@@ -134,9 +132,9 @@ static void exynos_set_wakeupmask(long mask)
 
 static void exynos_cpu_set_boot_vector(long flags)
 {
-	__raw_writel(virt_to_phys(exynos_cpu_resume),
-		     exynos_boot_vector_addr());
-	__raw_writel(flags, exynos_boot_vector_flag());
+	writel_relaxed(virt_to_phys(exynos_cpu_resume),
+		       exynos_boot_vector_addr());
+	writel_relaxed(flags, exynos_boot_vector_flag());
 }
 
 static int exynos_aftr_finisher(unsigned long flags)
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
deleted file mode 100644
index 4a87e86de..000000000
--- a/arch/arm/mach-exynos/pm_domains.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Exynos Generic power domain support.
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Implementation of Exynos specific power domain control which is used in
- * conjunction with runtime-pm. Support for both device-tree and non-device-tree
- * based power domain support is included.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/pm_domain.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/sched.h>
-
-#define INT_LOCAL_PWR_EN	0x7
-#define MAX_CLK_PER_DOMAIN	4
-
-/*
- * Exynos specific wrapper around the generic power domain
- */
-struct exynos_pm_domain {
-	void __iomem *base;
-	char const *name;
-	bool is_off;
-	struct generic_pm_domain pd;
-	struct clk *oscclk;
-	struct clk *clk[MAX_CLK_PER_DOMAIN];
-	struct clk *pclk[MAX_CLK_PER_DOMAIN];
-	struct clk *asb_clk[MAX_CLK_PER_DOMAIN];
-};
-
-static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
-{
-	struct exynos_pm_domain *pd;
-	void __iomem *base;
-	u32 timeout, pwr;
-	char *op;
-	int i;
-
-	pd = container_of(domain, struct exynos_pm_domain, pd);
-	base = pd->base;
-
-	for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
-		if (IS_ERR(pd->asb_clk[i]))
-			break;
-		clk_prepare_enable(pd->asb_clk[i]);
-	}
-
-	/* Set oscclk before powering off a domain*/
-	if (!power_on) {
-		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
-			if (IS_ERR(pd->clk[i]))
-				break;
-			pd->pclk[i] = clk_get_parent(pd->clk[i]);
-			if (clk_set_parent(pd->clk[i], pd->oscclk))
-				pr_err("%s: error setting oscclk as parent to clock %d\n",
-						pd->name, i);
-		}
-	}
-
-	pwr = power_on ? INT_LOCAL_PWR_EN : 0;
-	__raw_writel(pwr, base);
-
-	/* Wait max 1ms */
-	timeout = 10;
-
-	while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
-		if (!timeout) {
-			op = (power_on) ? "enable" : "disable";
-			pr_err("Power domain %s %s failed\n", domain->name, op);
-			return -ETIMEDOUT;
-		}
-		timeout--;
-		cpu_relax();
-		usleep_range(80, 100);
-	}
-
-	/* Restore clocks after powering on a domain*/
-	if (power_on) {
-		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
-			if (IS_ERR(pd->clk[i]))
-				break;
-
-			if (IS_ERR(pd->clk[i]))
-				continue; /* Skip on first power up */
-			if (clk_set_parent(pd->clk[i], pd->pclk[i]))
-				pr_err("%s: error setting parent to clock%d\n",
-						pd->name, i);
-		}
-	}
-
-	for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
-		if (IS_ERR(pd->asb_clk[i]))
-			break;
-		clk_disable_unprepare(pd->asb_clk[i]);
-	}
-
-	return 0;
-}
-
-static int exynos_pd_power_on(struct generic_pm_domain *domain)
-{
-	return exynos_pd_power(domain, true);
-}
-
-static int exynos_pd_power_off(struct generic_pm_domain *domain)
-{
-	return exynos_pd_power(domain, false);
-}
-
-static __init int exynos4_pm_init_power_domain(void)
-{
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
-		struct exynos_pm_domain *pd;
-		int on, i;
-
-		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
-		if (!pd) {
-			pr_err("%s: failed to allocate memory for domain\n",
-					__func__);
-			of_node_put(np);
-			return -ENOMEM;
-		}
-		pd->pd.name = kstrdup_const(strrchr(np->full_name, '/') + 1,
-					    GFP_KERNEL);
-		if (!pd->pd.name) {
-			kfree(pd);
-			of_node_put(np);
-			return -ENOMEM;
-		}
-
-		pd->name = pd->pd.name;
-		pd->base = of_iomap(np, 0);
-		if (!pd->base) {
-			pr_warn("%s: failed to map memory\n", __func__);
-			kfree_const(pd->pd.name);
-			kfree(pd);
-			continue;
-		}
-
-		pd->pd.power_off = exynos_pd_power_off;
-		pd->pd.power_on = exynos_pd_power_on;
-
-		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
-			char clk_name[8];
-
-			snprintf(clk_name, sizeof(clk_name), "asb%d", i);
-			pd->asb_clk[i] = of_clk_get_by_name(np, clk_name);
-			if (IS_ERR(pd->asb_clk[i]))
-				break;
-		}
-
-		pd->oscclk = of_clk_get_by_name(np, "oscclk");
-		if (IS_ERR(pd->oscclk))
-			goto no_clk;
-
-		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
-			char clk_name[8];
-
-			snprintf(clk_name, sizeof(clk_name), "clk%d", i);
-			pd->clk[i] = of_clk_get_by_name(np, clk_name);
-			if (IS_ERR(pd->clk[i]))
-				break;
-			/*
-			 * Skip setting parent on first power up.
-			 * The parent at this time may not be useful at all.
-			 */
-			pd->pclk[i] = ERR_PTR(-EINVAL);
-		}
-
-		if (IS_ERR(pd->clk[0]))
-			clk_put(pd->oscclk);
-
-no_clk:
-		on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN;
-
-		pm_genpd_init(&pd->pd, NULL, !on);
-		of_genpd_add_provider_simple(np, &pd->pd);
-	}
-
-	/* Assign the child power domains to their parents */
-	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
-		struct generic_pm_domain *child_domain, *parent_domain;
-		struct of_phandle_args args;
-
-		args.np = np;
-		args.args_count = 0;
-		child_domain = of_genpd_get_from_provider(&args);
-		if (IS_ERR(child_domain))
-			goto next_pd;
-
-		if (of_parse_phandle_with_args(np, "power-domains",
-					 "#power-domain-cells", 0, &args) != 0)
-			goto next_pd;
-
-		parent_domain = of_genpd_get_from_provider(&args);
-		if (IS_ERR(parent_domain))
-			goto next_pd;
-
-		if (pm_genpd_add_subdomain(parent_domain, child_domain))
-			pr_warn("%s failed to add subdomain: %s\n",
-				parent_domain->name, child_domain->name);
-		else
-			pr_info("%s has as child subdomain: %s.\n",
-				parent_domain->name, child_domain->name);
-next_pd:
-		of_node_put(np);
-	}
-
-	return 0;
-}
-core_initcall(exynos4_pm_init_power_domain);
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
deleted file mode 100644
index e812c1c85..000000000
--- a/arch/arm/mach-exynos/pmu.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS - CPU PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-
-
-#include "exynos-pmu.h"
-#include "regs-pmu.h"
-
-#define PMU_TABLE_END	(-1U)
-
-struct exynos_pmu_conf {
-	unsigned int offset;
-	u8 val[NUM_SYS_POWERDOWN];
-};
-
-struct exynos_pmu_data {
-	const struct exynos_pmu_conf *pmu_config;
-	const struct exynos_pmu_conf *pmu_config_extra;
-
-	void (*pmu_init)(void);
-	void (*powerdown_conf)(enum sys_powerdown);
-	void (*powerdown_conf_extra)(enum sys_powerdown);
-};
-
-struct exynos_pmu_context {
-	struct device *dev;
-	const struct exynos_pmu_data *pmu_data;
-};
-
-static void __iomem *pmu_base_addr;
-static struct exynos_pmu_context *pmu_context;
-
-static inline void pmu_raw_writel(u32 val, u32 offset)
-{
-	writel_relaxed(val, pmu_base_addr + offset);
-}
-
-static inline u32 pmu_raw_readl(u32 offset)
-{
-	return readl_relaxed(pmu_base_addr + offset);
-}
-
-static struct exynos_pmu_conf exynos3250_pmu_config[] = {
-	/* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
-	{ EXYNOS3_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
-	{ EXYNOS3_ARM_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
-	{ EXYNOS3_ISP_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS3_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS3_ARM_L2_SYS_PWR_REG,			{ 0x0, 0x0, 0x3} },
-	{ EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_APLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_TOP_BUS_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS3_TOP_RETENTION_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_TOP_PWR_SYS_PWR_REG,			{ 0x3, 0x3, 0x3} },
-	{ EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG,		{ 0x3, 0x3, 0x3} },
-	{ EXYNOS3_LOGIC_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_OSCCLK_GATE_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_XUSBXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_XXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_EXT_REGULATOR_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_GPIO_MODE_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
-	{ EXYNOS3_CAM_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_MFC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_G3D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_LCD0_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_ISP_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_MAUDIO_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ PMU_TABLE_END,},
-};
-
-static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
-	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
-	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
-	{ S5P_L2_0_LOWPWR,			{ 0x2, 0x2, 0x3 } },
-	{ S5P_L2_1_LOWPWR,			{ 0x2, 0x2, 0x3 } },
-	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
-	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_MODIMIF_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_PCIE_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_SATA_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
-	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_LCD1_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
-	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ PMU_TABLE_END,},
-};
-
-static const struct exynos_pmu_conf exynos4x12_pmu_config[] = {
-	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ISP_ARM_LOWPWR,			{ 0x1, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
-	{ S5P_L2_0_LOWPWR,			{ 0x0, 0x0, 0x3 } },
-	/* XXX_OPTION register should be set other field */
-	{ S5P_ARM_L2_0_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_L2_1_LOWPWR,			{ 0x0, 0x0, 0x3 } },
-	{ S5P_ARM_L2_1_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_DRAM_FREQ_DOWN_LOWPWR,		{ 0x1, 0x1, 0x1 } },
-	{ S5P_DDRPHY_DLLOFF_LOWPWR,		{ 0x1, 0x1, 0x1 } },
-	{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR,	{ 0x1, 0x1, 0x1 } },
-	{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_COREBLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_MPLLUSER_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
-	{ S5P_TOP_BUS_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_TOP_RETENTION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
-	{ S5P_TOP_PWR_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x3 } },
-	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_OSCCLK_GATE_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_LOGIC_RESET_COREBLK_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_OSCCLK_GATE_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
-	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_ONENAND_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_HSI_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_HSI_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_G2D_ACP_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_USBOTG_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_HSMMC_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_CSSYS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_SECSS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_ROTATOR_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_ROTATOR_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_ISOLATION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
-	{ S5P_GPIO_MODE_COREBLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_TOP_ASB_RESET_LOWPWR,		{ 0x1, 0x1, 0x1 } },
-	{ S5P_TOP_ASB_ISOLATION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_ISP_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
-	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ PMU_TABLE_END,},
-};
-
-static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
-	{ S5P_ARM_CORE2_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE2,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL2,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_CORE3_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE3,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL3,			{ 0x0, 0x0, 0x0 } },
-	{ PMU_TABLE_END,},
-};
-
-static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
-	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
-	{ EXYNOS5_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ARM_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_FSYS_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_ISP_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS5_ARM_L2_SYS_PWR_REG,			{ 0x3, 0x3, 0x3} },
-	{ EXYNOS5_ARM_L2_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_TOP_BUS_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_TOP_PWR_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
-	{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x3} },
-	{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_USBOTG_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_G2D_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_USBDRD_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_SDMMC_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_CSSYS_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_SECSS_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_ROTATOR_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_INTRAM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_INTROM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_JPEG_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_JPEG_MEM_OPTION,			{ 0x10, 0x10, 0x0} },
-	{ EXYNOS5_HSI_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_MCUIOP_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_SATA_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_XUSBXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_XXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_GPIO_MODE_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_GSCL_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_ISP_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_MFC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_G3D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_DISP1_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_MAU_SYS_PWR_REG,			{ 0x7, 0x7, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ PMU_TABLE_END,},
-};
-
-static struct exynos_pmu_conf exynos5420_pmu_config[] = {
-	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
-	{ EXYNOS5_ARM_CORE0_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ARM_CORE1_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_ARM_CORE2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_ARM_CORE3_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_CORE0_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_CORE1_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_CORE2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_CORE3_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ISP_ARM_SYS_PWR_REG,				{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_ARM_COMMON_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_COMMON_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ARM_L2_SYS_PWR_REG,				{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_L2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_RESET_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_TOP_BUS_SYS_PWR_REG,				{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_TOP_PWR_SYS_PWR_REG,				{ 0x3, 0x3, 0x0} },
-	{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_INTRAM_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
-	{ EXYNOS5420_INTROM_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
-	{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_XUSBXTI_SYS_PWR_REG,				{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_XXTI_SYS_PWR_REG,				{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_GPIO_MODE_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_GSCL_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_ISP_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_MFC_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_G3D_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_DISP1_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_MAU_SYS_PWR_REG,				{ 0x7, 0x7, 0x0} },
-	{ EXYNOS5420_G2D_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_MSC_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_FSYS_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_FSYS2_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_PSGEN_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_PERIC_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_WCORE_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ PMU_TABLE_END,},
-};
-
-static unsigned int const exynos3250_list_feed[] = {
-	EXYNOS3_ARM_CORE_OPTION(0),
-	EXYNOS3_ARM_CORE_OPTION(1),
-	EXYNOS3_ARM_CORE_OPTION(2),
-	EXYNOS3_ARM_CORE_OPTION(3),
-	EXYNOS3_ARM_COMMON_OPTION,
-	EXYNOS3_TOP_PWR_OPTION,
-	EXYNOS3_CORE_TOP_PWR_OPTION,
-	S5P_CAM_OPTION,
-	S5P_MFC_OPTION,
-	S5P_G3D_OPTION,
-	S5P_LCD0_OPTION,
-	S5P_ISP_OPTION,
-};
-
-static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
-{
-	unsigned int i;
-	unsigned int tmp;
-
-	/* Enable only SC_FEEDBACK */
-	for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
-		tmp = pmu_raw_readl(exynos3250_list_feed[i]);
-		tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
-		tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
-		pmu_raw_writel(tmp, exynos3250_list_feed[i]);
-	}
-
-	if (mode != SYS_SLEEP)
-		return;
-
-	pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION);
-	pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION);
-	pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION);
-	pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION,
-		       EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
-}
-
-static unsigned int const exynos5_list_both_cnt_feed[] = {
-	EXYNOS5_ARM_CORE0_OPTION,
-	EXYNOS5_ARM_CORE1_OPTION,
-	EXYNOS5_ARM_COMMON_OPTION,
-	EXYNOS5_GSCL_OPTION,
-	EXYNOS5_ISP_OPTION,
-	EXYNOS5_MFC_OPTION,
-	EXYNOS5_G3D_OPTION,
-	EXYNOS5_DISP1_OPTION,
-	EXYNOS5_MAU_OPTION,
-	EXYNOS5_TOP_PWR_OPTION,
-	EXYNOS5_TOP_PWR_SYSMEM_OPTION,
-};
-
-static unsigned int const exynos5_list_disable_wfi_wfe[] = {
-	EXYNOS5_ARM_CORE1_OPTION,
-	EXYNOS5_FSYS_ARM_OPTION,
-	EXYNOS5_ISP_ARM_OPTION,
-};
-
-static unsigned int const exynos5420_list_disable_pmu_reg[] = {
-	EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,
-	EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,
-	EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,
-	EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,
-	EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,
-	EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,
-	EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,
-	EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,
-	EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
-};
-
-static void exynos_power_off(void)
-{
-	unsigned int tmp;
-
-	pr_info("Power down.\n");
-	tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL);
-	tmp ^= (1 << 8);
-	pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL);
-
-	/* Wait a little so we don't give a false warning below */
-	mdelay(100);
-
-	pr_err("Power down failed, please power off system manually.\n");
-	while (1)
-		;
-}
-
-void exynos5420_powerdown_conf(enum sys_powerdown mode)
-{
-	u32 this_cluster;
-
-	this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
-
-	/*
-	 * set the cluster id to IROM register to ensure that we wake
-	 * up with the current cluster.
-	 */
-	pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2);
-}
-
-
-static void exynos5_powerdown_conf(enum sys_powerdown mode)
-{
-	unsigned int i;
-	unsigned int tmp;
-
-	/*
-	 * Enable both SC_FEEDBACK and SC_COUNTER
-	 */
-	for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
-		tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
-		tmp |= (EXYNOS5_USE_SC_FEEDBACK |
-			EXYNOS5_USE_SC_COUNTER);
-		pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
-	}
-
-	/*
-	 * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
-	 */
-	tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION);
-	tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
-	pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
-
-	/*
-	 * Disable WFI/WFE on XXX_OPTION
-	 */
-	for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) {
-		tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]);
-		tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
-			 EXYNOS5_OPTION_USE_STANDBYWFI);
-		pmu_raw_writel(tmp, exynos5_list_disable_wfi_wfe[i]);
-	}
-}
-
-void exynos_sys_powerdown_conf(enum sys_powerdown mode)
-{
-	unsigned int i;
-
-	const struct exynos_pmu_data *pmu_data = pmu_context->pmu_data;
-
-	if (pmu_data->powerdown_conf)
-		pmu_data->powerdown_conf(mode);
-
-	if (pmu_data->pmu_config) {
-		for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
-			pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
-					pmu_data->pmu_config[i].offset);
-	}
-
-	if (pmu_data->powerdown_conf_extra)
-		pmu_data->powerdown_conf_extra(mode);
-
-	if (pmu_data->pmu_config_extra) {
-		for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
-			pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
-					pmu_data->pmu_config_extra[i].offset);
-	}
-}
-
-static void exynos3250_pmu_init(void)
-{
-	unsigned int value;
-
-	/*
-	 * To prevent from issuing new bus request form L2 memory system
-	 * If core status is power down, should be set '1' to L2 power down
-	 */
-	value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
-	value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
-	pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
-
-	/* Enable USE_STANDBY_WFI for all CORE */
-	pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
-
-	/*
-	 * Set PSHOLD port for output high
-	 */
-	value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
-	value |= S5P_PS_HOLD_OUTPUT_HIGH;
-	pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
-
-	/*
-	 * Enable signal for PSHOLD port
-	 */
-	value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
-	value |= S5P_PS_HOLD_EN;
-	pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
-}
-
-static void exynos5250_pmu_init(void)
-{
-	unsigned int value;
-	/*
-	 * When SYS_WDTRESET is set, watchdog timer reset request
-	 * is ignored by power management unit.
-	 */
-	value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
-	value &= ~EXYNOS5_SYS_WDTRESET;
-	pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
-
-	value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
-	value &= ~EXYNOS5_SYS_WDTRESET;
-	pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
-}
-
-static void exynos5420_pmu_init(void)
-{
-	unsigned int value;
-	int i;
-
-	/*
-	 * Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers
-	 * for local power blocks to Low initially as per Table 8-4:
-	 * "System-Level Power-Down Configuration Registers".
-	 */
-	for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++)
-		pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]);
-
-	/* Enable USE_STANDBY_WFI for all CORE */
-	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
-
-	value  = pmu_raw_readl(EXYNOS_L2_OPTION(0));
-	value &= ~EXYNOS5_USE_RETENTION;
-	pmu_raw_writel(value, EXYNOS_L2_OPTION(0));
-
-	value = pmu_raw_readl(EXYNOS_L2_OPTION(1));
-	value &= ~EXYNOS5_USE_RETENTION;
-	pmu_raw_writel(value, EXYNOS_L2_OPTION(1));
-
-	/*
-	 * If L2_COMMON is turned off, clocks related to ATB async
-	 * bridge are gated. Thus, when ISP power is gated, LPI
-	 * may get stuck.
-	 */
-	value = pmu_raw_readl(EXYNOS5420_LPI_MASK);
-	value |= EXYNOS5420_ATB_ISP_ARM;
-	pmu_raw_writel(value, EXYNOS5420_LPI_MASK);
-
-	value  = pmu_raw_readl(EXYNOS5420_LPI_MASK1);
-	value |= EXYNOS5420_ATB_KFC;
-	pmu_raw_writel(value, EXYNOS5420_LPI_MASK1);
-
-	/* Prevent issue of new bus request from L2 memory */
-	value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
-	value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
-	pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION);
-
-	value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION);
-	value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
-	pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION);
-
-	/* This setting is to reduce suspend/resume time */
-	pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3);
-
-	/* Serialized CPU wakeup of Eagle */
-	pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE);
-
-	pmu_raw_writel(SPREAD_USE_STANDWFI,
-			EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
-
-	pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
-	pr_info("EXYNOS5420 PMU initialized\n");
-}
-
-static int pmu_restart_notify(struct notifier_block *this,
-		unsigned long code, void *unused)
-{
-	pmu_raw_writel(0x1, EXYNOS_SWRESET);
-
-	return NOTIFY_DONE;
-}
-
-static const struct exynos_pmu_data exynos3250_pmu_data = {
-	.pmu_config	= exynos3250_pmu_config,
-	.pmu_init	= exynos3250_pmu_init,
-	.powerdown_conf_extra	= exynos3250_powerdown_conf_extra,
-};
-
-static const struct exynos_pmu_data exynos4210_pmu_data = {
-	.pmu_config	= exynos4210_pmu_config,
-};
-
-static const struct exynos_pmu_data exynos4212_pmu_data = {
-	.pmu_config	= exynos4x12_pmu_config,
-};
-
-static const struct exynos_pmu_data exynos4412_pmu_data = {
-	.pmu_config		= exynos4x12_pmu_config,
-	.pmu_config_extra	= exynos4412_pmu_config,
-};
-
-static const struct exynos_pmu_data exynos5250_pmu_data = {
-	.pmu_config	= exynos5250_pmu_config,
-	.pmu_init	= exynos5250_pmu_init,
-	.powerdown_conf	= exynos5_powerdown_conf,
-};
-
-static struct exynos_pmu_data exynos5420_pmu_data = {
-	.pmu_config	= exynos5420_pmu_config,
-	.pmu_init	= exynos5420_pmu_init,
-	.powerdown_conf	= exynos5420_powerdown_conf,
-};
-
-/*
- * PMU platform driver and devicetree bindings.
- */
-static const struct of_device_id exynos_pmu_of_device_ids[] = {
-	{
-		.compatible = "samsung,exynos3250-pmu",
-		.data = &exynos3250_pmu_data,
-	}, {
-		.compatible = "samsung,exynos4210-pmu",
-		.data = &exynos4210_pmu_data,
-	}, {
-		.compatible = "samsung,exynos4212-pmu",
-		.data = &exynos4212_pmu_data,
-	}, {
-		.compatible = "samsung,exynos4412-pmu",
-		.data = &exynos4412_pmu_data,
-	}, {
-		.compatible = "samsung,exynos5250-pmu",
-		.data = &exynos5250_pmu_data,
-	}, {
-		.compatible = "samsung,exynos5420-pmu",
-		.data = &exynos5420_pmu_data,
-	},
-	{ /*sentinel*/ },
-};
-
-/*
- * Exynos PMU restart notifier, handles restart functionality
- */
-static struct notifier_block pmu_restart_handler = {
-	.notifier_call = pmu_restart_notify,
-	.priority = 128,
-};
-
-static int exynos_pmu_probe(struct platform_device *pdev)
-{
-	const struct of_device_id *match;
-	struct device *dev = &pdev->dev;
-	struct resource *res;
-	int ret;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pmu_base_addr = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pmu_base_addr))
-		return PTR_ERR(pmu_base_addr);
-
-	pmu_context = devm_kzalloc(&pdev->dev,
-			sizeof(struct exynos_pmu_context),
-			GFP_KERNEL);
-	if (!pmu_context) {
-		dev_err(dev, "Cannot allocate memory.\n");
-		return -ENOMEM;
-	}
-	pmu_context->dev = dev;
-
-	match = of_match_node(exynos_pmu_of_device_ids, dev->of_node);
-
-	pmu_context->pmu_data = match->data;
-
-	if (pmu_context->pmu_data->pmu_init)
-		pmu_context->pmu_data->pmu_init();
-
-	platform_set_drvdata(pdev, pmu_context);
-
-	ret = register_restart_handler(&pmu_restart_handler);
-	if (ret)
-		dev_warn(dev, "can't register restart handler err=%d\n", ret);
-
-	pm_power_off = exynos_power_off;
-
-	dev_dbg(dev, "Exynos PMU Driver probe done\n");
-	return 0;
-}
-
-static struct platform_driver exynos_pmu_driver = {
-	.driver  = {
-		.name   = "exynos-pmu",
-		.owner	= THIS_MODULE,
-		.of_match_table = exynos_pmu_of_device_ids,
-	},
-	.probe = exynos_pmu_probe,
-};
-
-static int __init exynos_pmu_init(void)
-{
-	return platform_driver_register(&exynos_pmu_driver);
-
-}
-postcore_initcall(exynos_pmu_init);
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
deleted file mode 100644
index b7614333d..000000000
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ /dev/null
@@ -1,696 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - Power management unit definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_PMU_H
-#define __ASM_ARCH_REGS_PMU_H __FILE__
-
-#define S5P_CENTRAL_SEQ_CONFIGURATION		0x0200
-
-#define S5P_CENTRAL_LOWPWR_CFG			(1 << 16)
-
-#define S5P_CENTRAL_SEQ_OPTION			0x0208
-
-#define S5P_USE_STANDBY_WFI0			(1 << 16)
-#define S5P_USE_STANDBY_WFI1			(1 << 17)
-#define S5P_USE_STANDBY_WFI2			(1 << 19)
-#define S5P_USE_STANDBY_WFI3			(1 << 20)
-#define S5P_USE_STANDBY_WFE0			(1 << 24)
-#define S5P_USE_STANDBY_WFE1			(1 << 25)
-#define S5P_USE_STANDBY_WFE2			(1 << 27)
-#define S5P_USE_STANDBY_WFE3			(1 << 28)
-
-#define S5P_USE_STANDBY_WFI_ALL \
-	(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \
-	 S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \
-	 S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \
-	 S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3)
-
-#define S5P_USE_DELAYED_RESET_ASSERTION		BIT(12)
-
-#define EXYNOS_CORE_PO_RESET(n)			((1 << 4) << n)
-#define EXYNOS_WAKEUP_FROM_LOWPWR		(1 << 28)
-#define EXYNOS_SWRESET				0x0400
-#define EXYNOS5440_SWRESET			0x00C4
-
-#define S5P_WAKEUP_STAT				0x0600
-#define S5P_EINT_WAKEUP_MASK			0x0604
-#define S5P_WAKEUP_MASK				0x0608
-#define S5P_WAKEUP_MASK2				0x0614
-
-#define S5P_INFORM0				0x0800
-#define S5P_INFORM1				0x0804
-#define S5P_INFORM5				0x0814
-#define S5P_INFORM6				0x0818
-#define S5P_INFORM7				0x081C
-#define S5P_PMU_SPARE2				0x0908
-#define S5P_PMU_SPARE3				0x090C
-
-#define EXYNOS_IROM_DATA2			0x0988
-#define S5P_ARM_CORE0_LOWPWR			0x1000
-#define S5P_DIS_IRQ_CORE0			0x1004
-#define S5P_DIS_IRQ_CENTRAL0			0x1008
-#define S5P_ARM_CORE1_LOWPWR			0x1010
-#define S5P_DIS_IRQ_CORE1			0x1014
-#define S5P_DIS_IRQ_CENTRAL1			0x1018
-#define S5P_ARM_COMMON_LOWPWR			0x1080
-#define S5P_L2_0_LOWPWR				0x10C0
-#define S5P_L2_1_LOWPWR				0x10C4
-#define S5P_CMU_ACLKSTOP_LOWPWR			0x1100
-#define S5P_CMU_SCLKSTOP_LOWPWR			0x1104
-#define S5P_CMU_RESET_LOWPWR			0x110C
-#define S5P_APLL_SYSCLK_LOWPWR			0x1120
-#define S5P_MPLL_SYSCLK_LOWPWR			0x1124
-#define S5P_VPLL_SYSCLK_LOWPWR			0x1128
-#define S5P_EPLL_SYSCLK_LOWPWR			0x112C
-#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR	0x1138
-#define S5P_CMU_RESET_GPSALIVE_LOWPWR		0x113C
-#define S5P_CMU_CLKSTOP_CAM_LOWPWR		0x1140
-#define S5P_CMU_CLKSTOP_TV_LOWPWR		0x1144
-#define S5P_CMU_CLKSTOP_MFC_LOWPWR		0x1148
-#define S5P_CMU_CLKSTOP_G3D_LOWPWR		0x114C
-#define S5P_CMU_CLKSTOP_LCD0_LOWPWR		0x1150
-#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		0x1158
-#define S5P_CMU_CLKSTOP_GPS_LOWPWR		0x115C
-#define S5P_CMU_RESET_CAM_LOWPWR		0x1160
-#define S5P_CMU_RESET_TV_LOWPWR			0x1164
-#define S5P_CMU_RESET_MFC_LOWPWR		0x1168
-#define S5P_CMU_RESET_G3D_LOWPWR		0x116C
-#define S5P_CMU_RESET_LCD0_LOWPWR		0x1170
-#define S5P_CMU_RESET_MAUDIO_LOWPWR		0x1178
-#define S5P_CMU_RESET_GPS_LOWPWR		0x117C
-#define S5P_TOP_BUS_LOWPWR			0x1180
-#define S5P_TOP_RETENTION_LOWPWR		0x1184
-#define S5P_TOP_PWR_LOWPWR			0x1188
-#define S5P_LOGIC_RESET_LOWPWR			0x11A0
-#define S5P_ONENAND_MEM_LOWPWR			0x11C0
-#define S5P_G2D_ACP_MEM_LOWPWR			0x11C8
-#define S5P_USBOTG_MEM_LOWPWR			0x11CC
-#define S5P_HSMMC_MEM_LOWPWR			0x11D0
-#define S5P_CSSYS_MEM_LOWPWR			0x11D4
-#define S5P_SECSS_MEM_LOWPWR			0x11D8
-#define S5P_PAD_RETENTION_DRAM_LOWPWR		0x1200
-#define S5P_PAD_RETENTION_MAUDIO_LOWPWR		0x1204
-#define S5P_PAD_RETENTION_GPIO_LOWPWR		0x1220
-#define S5P_PAD_RETENTION_UART_LOWPWR		0x1224
-#define S5P_PAD_RETENTION_MMCA_LOWPWR		0x1228
-#define S5P_PAD_RETENTION_MMCB_LOWPWR		0x122C
-#define S5P_PAD_RETENTION_EBIA_LOWPWR		0x1230
-#define S5P_PAD_RETENTION_EBIB_LOWPWR		0x1234
-#define S5P_PAD_RETENTION_ISOLATION_LOWPWR	0x1240
-#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR	0x1260
-#define S5P_XUSBXTI_LOWPWR			0x1280
-#define S5P_XXTI_LOWPWR				0x1284
-#define S5P_EXT_REGULATOR_LOWPWR		0x12C0
-#define S5P_GPIO_MODE_LOWPWR			0x1300
-#define S5P_GPIO_MODE_MAUDIO_LOWPWR		0x1340
-#define S5P_CAM_LOWPWR				0x1380
-#define S5P_TV_LOWPWR				0x1384
-#define S5P_MFC_LOWPWR				0x1388
-#define S5P_G3D_LOWPWR				0x138C
-#define S5P_LCD0_LOWPWR				0x1390
-#define S5P_MAUDIO_LOWPWR			0x1398
-#define S5P_GPS_LOWPWR				0x139C
-#define S5P_GPS_ALIVE_LOWPWR			0x13A0
-
-#define EXYNOS_ARM_CORE0_CONFIGURATION		0x2000
-#define EXYNOS_ARM_CORE_CONFIGURATION(_nr)	\
-			(EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr)))
-#define EXYNOS_ARM_CORE_STATUS(_nr)		\
-			(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
-#define EXYNOS_ARM_CORE_OPTION(_nr)		\
-			(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x8)
-
-#define EXYNOS_ARM_COMMON_CONFIGURATION		0x2500
-#define EXYNOS_COMMON_CONFIGURATION(_nr)	\
-			(EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr)))
-#define EXYNOS_COMMON_STATUS(_nr)		\
-			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4)
-#define EXYNOS_COMMON_OPTION(_nr)		\
-			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
-
-#define EXYNOS_CORE_LOCAL_PWR_EN		0x3
-
-#define EXYNOS_ARM_COMMON_STATUS		0x2504
-#define EXYNOS_COMMON_OPTION(_nr)		\
-			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
-
-#define EXYNOS_ARM_L2_CONFIGURATION		0x2600
-#define EXYNOS_L2_CONFIGURATION(_nr)		\
-			(EXYNOS_ARM_L2_CONFIGURATION + ((_nr) * 0x80))
-#define EXYNOS_L2_STATUS(_nr)			\
-			(EXYNOS_L2_CONFIGURATION(_nr) + 0x4)
-#define EXYNOS_L2_OPTION(_nr)			\
-			(EXYNOS_L2_CONFIGURATION(_nr) + 0x8)
-#define EXYNOS_L2_COMMON_PWR_EN			0x3
-
-#define EXYNOS_ARM_CORE_X_STATUS_OFFSET		0x4
-
-#define EXYNOS5_APLL_SYSCLK_CONFIGURATION	0x2A00
-#define EXYNOS5_APLL_SYSCLK_STATUS		0x2A04
-
-#define EXYNOS5_ARM_L2_OPTION			0x2608
-#define EXYNOS5_USE_RETENTION			BIT(4)
-
-#define EXYNOS5_L2RSTDISABLE_VALUE		BIT(3)
-
-#define S5P_PAD_RET_MAUDIO_OPTION		0x3028
-#define S5P_PAD_RET_MMC2_OPTION			0x30c8
-#define S5P_PAD_RET_GPIO_OPTION			0x3108
-#define S5P_PAD_RET_UART_OPTION			0x3128
-#define S5P_PAD_RET_MMCA_OPTION			0x3148
-#define S5P_PAD_RET_MMCB_OPTION			0x3168
-#define S5P_PAD_RET_EBIA_OPTION			0x3188
-#define S5P_PAD_RET_EBIB_OPTION			0x31A8
-#define S5P_PAD_RET_SPI_OPTION			0x31c8
-
-#define S5P_PS_HOLD_CONTROL			0x330C
-#define S5P_PS_HOLD_EN				(1 << 31)
-#define S5P_PS_HOLD_OUTPUT_HIGH			(3 << 8)
-
-#define S5P_CAM_OPTION				0x3C08
-#define S5P_MFC_OPTION				0x3C48
-#define S5P_G3D_OPTION				0x3C68
-#define S5P_LCD0_OPTION				0x3C88
-#define S5P_LCD1_OPTION				0x3CA8
-#define S5P_ISP_OPTION				S5P_LCD1_OPTION
-
-#define S5P_CORE_LOCAL_PWR_EN			0x3
-#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG		(0x3 << 8)
-#define S5P_CORE_AUTOWAKEUP_EN			(1 << 31)
-
-/* Only for EXYNOS4210 */
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	0x1154
-#define S5P_CMU_RESET_LCD1_LOWPWR	0x1174
-#define S5P_MODIMIF_MEM_LOWPWR		0x11C4
-#define S5P_PCIE_MEM_LOWPWR		0x11E0
-#define S5P_SATA_MEM_LOWPWR		0x11E4
-#define S5P_LCD1_LOWPWR			0x1394
-
-/* Only for EXYNOS4x12 */
-#define S5P_ISP_ARM_LOWPWR			0x1050
-#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	0x1054
-#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	0x1058
-#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		0x1110
-#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		0x1114
-#define S5P_CMU_RESET_COREBLK_LOWPWR		0x111C
-#define S5P_MPLLUSER_SYSCLK_LOWPWR		0x1130
-#define S5P_CMU_CLKSTOP_ISP_LOWPWR		0x1154
-#define S5P_CMU_RESET_ISP_LOWPWR		0x1174
-#define S5P_TOP_BUS_COREBLK_LOWPWR		0x1190
-#define S5P_TOP_RETENTION_COREBLK_LOWPWR	0x1194
-#define S5P_TOP_PWR_COREBLK_LOWPWR		0x1198
-#define S5P_OSCCLK_GATE_LOWPWR			0x11A4
-#define S5P_LOGIC_RESET_COREBLK_LOWPWR		0x11B0
-#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		0x11B4
-#define S5P_HSI_MEM_LOWPWR			0x11C4
-#define S5P_ROTATOR_MEM_LOWPWR			0x11DC
-#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	0x123C
-#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	0x1250
-#define S5P_GPIO_MODE_COREBLK_LOWPWR		0x1320
-#define S5P_TOP_ASB_RESET_LOWPWR		0x1344
-#define S5P_TOP_ASB_ISOLATION_LOWPWR		0x1348
-#define S5P_ISP_LOWPWR				0x1394
-#define S5P_DRAM_FREQ_DOWN_LOWPWR		0x13B0
-#define S5P_DDRPHY_DLLOFF_LOWPWR		0x13B4
-#define S5P_CMU_SYSCLK_ISP_LOWPWR		0x13B8
-#define S5P_CMU_SYSCLK_GPS_LOWPWR		0x13BC
-#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		0x13C0
-
-#define S5P_ARM_L2_0_OPTION			0x2608
-#define S5P_ARM_L2_1_OPTION			0x2628
-#define S5P_ONENAND_MEM_OPTION			0x2E08
-#define S5P_HSI_MEM_OPTION			0x2E28
-#define S5P_G2D_ACP_MEM_OPTION			0x2E48
-#define S5P_USBOTG_MEM_OPTION			0x2E68
-#define S5P_HSMMC_MEM_OPTION			0x2E88
-#define S5P_CSSYS_MEM_OPTION			0x2EA8
-#define S5P_SECSS_MEM_OPTION			0x2EC8
-#define S5P_ROTATOR_MEM_OPTION			0x2F48
-
-/* Only for EXYNOS4412 */
-#define S5P_ARM_CORE2_LOWPWR			0x1020
-#define S5P_DIS_IRQ_CORE2			0x1024
-#define S5P_DIS_IRQ_CENTRAL2			0x1028
-#define S5P_ARM_CORE3_LOWPWR			0x1030
-#define S5P_DIS_IRQ_CORE3			0x1034
-#define S5P_DIS_IRQ_CENTRAL3			0x1038
-
-/* Only for EXYNOS3XXX */
-#define EXYNOS3_ARM_CORE0_SYS_PWR_REG			0x1000
-#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG	0x1004
-#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG	0x1008
-#define EXYNOS3_ARM_CORE1_SYS_PWR_REG			0x1010
-#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG	0x1014
-#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG	0x1018
-#define EXYNOS3_ISP_ARM_SYS_PWR_REG			0x1050
-#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG	0x1054
-#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG	0x1058
-#define EXYNOS3_ARM_COMMON_SYS_PWR_REG			0x1080
-#define EXYNOS3_ARM_L2_SYS_PWR_REG			0x10C0
-#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG		0x1100
-#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG		0x1104
-#define EXYNOS3_CMU_RESET_SYS_PWR_REG			0x110C
-#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG	0x1110
-#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG	0x1114
-#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG		0x111C
-#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG			0x1120
-#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG			0x1124
-#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG			0x1128
-#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG			0x112C
-#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG		0x1130
-#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG		0x1134
-#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG		0x1138
-#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG		0x1140
-#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG		0x1148
-#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG		0x114C
-#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG		0x1150
-#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG		0x1154
-#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG		0x1158
-#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG		0x1160
-#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG		0x1168
-#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG		0x116C
-#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG		0x1170
-#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG		0x1174
-#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG		0x1178
-#define EXYNOS3_TOP_BUS_SYS_PWR_REG			0x1180
-#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG		0x1184
-#define EXYNOS3_TOP_PWR_SYS_PWR_REG			0x1188
-#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG		0x1190
-#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG	0x1194
-#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG		0x1198
-#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG			0x11A0
-#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG			0x11A4
-#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG		0x11B0
-#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG		0x11B4
-#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG		0x1200
-#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG	0x1204
-#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG		0x1208
-#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG		0x1218
-#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG		0x1220
-#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG		0x1224
-#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG		0x1228
-#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG		0x122C
-#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG		0x1230
-#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG		0x1234
-#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG		0x1238
-#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG		0x1240
-#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG			0x1260
-#define EXYNOS3_XUSBXTI_SYS_PWR_REG			0x1280
-#define EXYNOS3_XXTI_SYS_PWR_REG			0x1284
-#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG		0x12C0
-#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG	0x12C4
-#define EXYNOS3_GPIO_MODE_SYS_PWR_REG			0x1300
-#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG		0x1340
-#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG		0x1344
-#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG		0x1348
-#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG	0x1350
-#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG	0x1354
-#define EXYNOS3_CAM_SYS_PWR_REG				0x1380
-#define EXYNOS3_MFC_SYS_PWR_REG				0x1388
-#define EXYNOS3_G3D_SYS_PWR_REG				0x138C
-#define EXYNOS3_LCD0_SYS_PWR_REG			0x1390
-#define EXYNOS3_ISP_SYS_PWR_REG				0x1394
-#define EXYNOS3_MAUDIO_SYS_PWR_REG			0x1398
-#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG		0x13B0
-#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG		0x13B4
-#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG		0x13B8
-#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG		0x13C0
-#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG			0x13C4
-#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG			0x13C8
-
-#define EXYNOS3_ARM_CORE0_OPTION			0x2008
-#define EXYNOS3_ARM_CORE_OPTION(_nr)	\
-			(EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80))
-
-#define EXYNOS3_ARM_COMMON_OPTION			0x2408
-#define EXYNOS3_ARM_L2_OPTION				0x2608
-#define EXYNOS3_TOP_PWR_OPTION				0x2C48
-#define EXYNOS3_CORE_TOP_PWR_OPTION			0x2CA8
-#define EXYNOS3_XUSBXTI_DURATION			0x341C
-#define EXYNOS3_XXTI_DURATION				0x343C
-#define EXYNOS3_EXT_REGULATOR_DURATION			0x361C
-#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION		0x363C
-#define XUSBXTI_DURATION				0x00000BB8
-#define XXTI_DURATION					XUSBXTI_DURATION
-#define EXT_REGULATOR_DURATION				0x00001D4C
-#define EXT_REGULATOR_COREBLK_DURATION			EXT_REGULATOR_DURATION
-
-/* for XXX_OPTION */
-#define EXYNOS3_OPTION_USE_SC_COUNTER			(1 << 0)
-#define EXYNOS3_OPTION_USE_SC_FEEDBACK			(1 << 1)
-#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN	(1 << 7)
-
-/* For EXYNOS5 */
-
-#define EXYNOS5_AUTO_WDTRESET_DISABLE				0x0408
-#define EXYNOS5_MASK_WDTRESET_REQUEST				0x040C
-
-#define EXYNOS5_USE_RETENTION			BIT(4)
-#define EXYNOS5_SYS_WDTRESET					(1 << 20)
-
-#define EXYNOS5_ARM_CORE0_SYS_PWR_REG				0x1000
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG		0x1004
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG		0x1008
-#define EXYNOS5_ARM_CORE1_SYS_PWR_REG				0x1010
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG		0x1014
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG		0x1018
-#define EXYNOS5_FSYS_ARM_SYS_PWR_REG				0x1040
-#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG		0x1048
-#define EXYNOS5_ISP_ARM_SYS_PWR_REG				0x1050
-#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG		0x1054
-#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG		0x1058
-#define EXYNOS5_ARM_COMMON_SYS_PWR_REG				0x1080
-#define EXYNOS5_ARM_L2_SYS_PWR_REG				0x10C0
-#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG			0x1100
-#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG			0x1104
-#define EXYNOS5_CMU_RESET_SYS_PWR_REG				0x110C
-#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG			0x1120
-#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG			0x1124
-#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG			0x112C
-#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG			0x1130
-#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG			0x1134
-#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG			0x1138
-#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG				0x1140
-#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG				0x1144
-#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG				0x1148
-#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG				0x114C
-#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG				0x1150
-#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG				0x1154
-#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG			0x1164
-#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG			0x1170
-#define EXYNOS5_TOP_BUS_SYS_PWR_REG				0x1180
-#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG			0x1184
-#define EXYNOS5_TOP_PWR_SYS_PWR_REG				0x1188
-#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG			0x1190
-#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG		0x1194
-#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG			0x1198
-#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG				0x11A0
-#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG				0x11A4
-#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG			0x11B0
-#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG			0x11B4
-#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG				0x11C0
-#define EXYNOS5_G2D_MEM_SYS_PWR_REG				0x11C8
-#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG				0x11CC
-#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG				0x11D0
-#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG				0x11D4
-#define EXYNOS5_SECSS_MEM_SYS_PWR_REG				0x11D8
-#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG				0x11DC
-#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG				0x11E0
-#define EXYNOS5_INTROM_MEM_SYS_PWR_REG				0x11E4
-#define EXYNOS5_JPEG_MEM_SYS_PWR_REG				0x11E8
-#define EXYNOS5_HSI_MEM_SYS_PWR_REG				0x11EC
-#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG				0x11F4
-#define EXYNOS5_SATA_MEM_SYS_PWR_REG				0x11FC
-#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG			0x1200
-#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG			0x1204
-#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG		0x1208
-#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG			0x1220
-#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG			0x1224
-#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG			0x1228
-#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG			0x122C
-#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG			0x1230
-#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG			0x1234
-#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG			0x1238
-#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG		0x123C
-#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG			0x1240
-#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG		0x1250
-#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG				0x1260
-#define EXYNOS5_XUSBXTI_SYS_PWR_REG				0x1280
-#define EXYNOS5_XXTI_SYS_PWR_REG				0x1284
-#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG			0x12C0
-#define EXYNOS5_GPIO_MODE_SYS_PWR_REG				0x1300
-#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG			0x1320
-#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG			0x1340
-#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG			0x1344
-#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG			0x1348
-#define EXYNOS5_GSCL_SYS_PWR_REG				0x1400
-#define EXYNOS5_ISP_SYS_PWR_REG					0x1404
-#define EXYNOS5_MFC_SYS_PWR_REG					0x1408
-#define EXYNOS5_G3D_SYS_PWR_REG					0x140C
-#define EXYNOS5_DISP1_SYS_PWR_REG				0x1414
-#define EXYNOS5_MAU_SYS_PWR_REG					0x1418
-#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG			0x1480
-#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG			0x1484
-#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG			0x1488
-#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG			0x148C
-#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG			0x1494
-#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG			0x1498
-#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG			0x14C0
-#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG			0x14C4
-#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG			0x14C8
-#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG			0x14CC
-#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG			0x14D4
-#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG			0x14D8
-#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG			0x1580
-#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG			0x1584
-#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG			0x1588
-#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG			0x158C
-#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG			0x1594
-#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG			0x1598
-
-#define EXYNOS5_ARM_CORE0_OPTION				0x2008
-#define EXYNOS5_ARM_CORE1_OPTION				0x2088
-#define EXYNOS5_FSYS_ARM_OPTION					0x2208
-#define EXYNOS5_ISP_ARM_OPTION					0x2288
-#define EXYNOS5_ARM_COMMON_OPTION				0x2408
-#define EXYNOS5_ARM_L2_OPTION					0x2608
-#define EXYNOS5_TOP_PWR_OPTION					0x2C48
-#define EXYNOS5_TOP_PWR_SYSMEM_OPTION				0x2CC8
-#define EXYNOS5_JPEG_MEM_OPTION					0x2F48
-#define EXYNOS5_GSCL_OPTION					0x4008
-#define EXYNOS5_ISP_OPTION					0x4028
-#define EXYNOS5_MFC_OPTION					0x4048
-#define EXYNOS5_G3D_OPTION					0x4068
-#define EXYNOS5_DISP1_OPTION					0x40A8
-#define EXYNOS5_MAU_OPTION					0x40C8
-
-#define EXYNOS5_USE_SC_FEEDBACK					(1 << 1)
-#define EXYNOS5_USE_SC_COUNTER					(1 << 0)
-
-#define EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN			(1 << 7)
-
-#define EXYNOS5_OPTION_USE_STANDBYWFE				(1 << 24)
-#define EXYNOS5_OPTION_USE_STANDBYWFI				(1 << 16)
-
-#define EXYNOS5_OPTION_USE_RETENTION				(1 << 4)
-
-#define EXYNOS5420_SWRESET_KFC_SEL				0x3
-
-#include <asm/cputype.h>
-#define MAX_CPUS_IN_CLUSTER	4
-
-static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
-{
-	return ((MPIDR_AFFINITY_LEVEL(mpidr, 1) * MAX_CPUS_IN_CLUSTER)
-		 + MPIDR_AFFINITY_LEVEL(mpidr, 0));
-}
-
-/* Only for EXYNOS5420 */
-#define EXYNOS5420_ISP_ARM_OPTION				0x2488
-#define EXYNOS5420_L2RSTDISABLE_VALUE				BIT(3)
-
-#define EXYNOS5420_LPI_MASK					0x0004
-#define EXYNOS5420_LPI_MASK1					0x0008
-#define EXYNOS5420_UFS						BIT(8)
-#define EXYNOS5420_ATB_KFC					BIT(13)
-#define EXYNOS5420_ATB_ISP_ARM					BIT(19)
-#define EXYNOS5420_EMULATION					BIT(31)
-#define ATB_ISP_ARM						BIT(12)
-#define ATB_KFC							BIT(13)
-#define ATB_NOC							BIT(14)
-
-#define EXYNOS5420_ARM_INTR_SPREAD_ENABLE			0x0100
-#define EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI		0x0104
-#define EXYNOS5420_UP_SCHEDULER					0x0120
-#define SPREAD_ENABLE						0xF
-#define SPREAD_USE_STANDWFI					0xF
-
-#define EXYNOS5420_BB_CON1					0x0784
-#define EXYNOS5420_BB_SEL_EN					BIT(31)
-#define EXYNOS5420_BB_PMOS_EN					BIT(7)
-#define EXYNOS5420_BB_1300X					0XF
-
-#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG			0x1020
-#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG		0x1024
-#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG	0x1028
-#define EXYNOS5420_ARM_CORE3_SYS_PWR_REG			0x1030
-#define EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG		0x1034
-#define EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG	0x1038
-#define EXYNOS5420_KFC_CORE0_SYS_PWR_REG			0x1040
-#define EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG		0x1044
-#define EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG	0x1048
-#define EXYNOS5420_KFC_CORE1_SYS_PWR_REG			0x1050
-#define EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG		0x1054
-#define EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG	0x1058
-#define EXYNOS5420_KFC_CORE2_SYS_PWR_REG			0x1060
-#define EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG		0x1064
-#define EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG	0x1068
-#define EXYNOS5420_KFC_CORE3_SYS_PWR_REG			0x1070
-#define EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG		0x1074
-#define EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG	0x1078
-#define EXYNOS5420_ISP_ARM_SYS_PWR_REG				0x1090
-#define EXYNOS5420_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG		0x1094
-#define EXYNOS5420_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG		0x1098
-#define EXYNOS5420_ARM_COMMON_SYS_PWR_REG			0x10A0
-#define EXYNOS5420_KFC_COMMON_SYS_PWR_REG			0x10B0
-#define EXYNOS5420_KFC_L2_SYS_PWR_REG				0x10D0
-#define EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG			0x1158
-#define EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG			0x115C
-#define EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG			0x1160
-#define EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG                      0x1174
-#define EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG                      0x1178
-#define EXYNOS5420_INTRAM_MEM_SYS_PWR_REG                       0x11B8
-#define EXYNOS5420_INTROM_MEM_SYS_PWR_REG                       0x11BC
-#define EXYNOS5420_ONENANDXL_MEM_SYS_PWR			0x11C0
-#define EXYNOS5420_USBDEV_MEM_SYS_PWR				0x11CC
-#define EXYNOS5420_USBDEV1_MEM_SYS_PWR				0x11D0
-#define EXYNOS5420_SDMMC_MEM_SYS_PWR				0x11D4
-#define EXYNOS5420_CSSYS_MEM_SYS_PWR				0x11D8
-#define EXYNOS5420_SECSS_MEM_SYS_PWR				0x11DC
-#define EXYNOS5420_ROTATOR_MEM_SYS_PWR				0x11E0
-#define EXYNOS5420_INTRAM_MEM_SYS_PWR				0x11E4
-#define EXYNOS5420_INTROM_MEM_SYS_PWR				0x11E8
-#define EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG		0x1208
-#define EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG		0x1210
-#define EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG		0x1214
-#define EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG		0x1218
-#define EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG		0x121C
-#define EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG		0x1220
-#define EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG		0x1224
-#define EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG		0x1228
-#define EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG		0x122C
-#define EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG		0x1230
-#define EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG	0x1234
-#define EXYNOS5420_DISP1_SYS_PWR_REG				0x1410
-#define EXYNOS5420_MAU_SYS_PWR_REG				0x1414
-#define EXYNOS5420_G2D_SYS_PWR_REG				0x1418
-#define EXYNOS5420_MSC_SYS_PWR_REG				0x141C
-#define EXYNOS5420_FSYS_SYS_PWR_REG				0x1420
-#define EXYNOS5420_FSYS2_SYS_PWR_REG				0x1424
-#define EXYNOS5420_PSGEN_SYS_PWR_REG				0x1428
-#define EXYNOS5420_PERIC_SYS_PWR_REG				0x142C
-#define EXYNOS5420_WCORE_SYS_PWR_REG				0x1430
-#define EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG		0x1490
-#define EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG			0x1494
-#define EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG			0x1498
-#define EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG			0x149C
-#define EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG			0x14A0
-#define EXYNOS5420_CMU_CLKSTOP_FSYS2_SYS_PWR_REG		0x14A4
-#define EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG		0x14A8
-#define EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG		0x14AC
-#define EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG		0x14B0
-#define EXYNOS5420_CMU_SYSCLK_TOPPWR_SYS_PWR_REG		0x14BC
-#define EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG			0x14D0
-#define EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG			0x14D4
-#define EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG			0x14D8
-#define EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG			0x14DC
-#define EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG			0x14E0
-#define EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG			0x14E4
-#define EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG			0x14E8
-#define EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG			0x14EC
-#define EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG			0x14F0
-#define EXYNOS5420_CMU_SYSCLK_SYSMEM_TOPPWR_SYS_PWR_REG		0x14F4
-#define EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG			0x1570
-#define EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG			0x1574
-#define EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG			0x1578
-#define EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG			0x157C
-#define EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG			0x1590
-#define EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG			0x1594
-#define EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG			0x1598
-#define EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG			0x159C
-#define EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG			0x15A0
-#define EXYNOS5420_SFR_AXI_CGDIS1				0x15E4
-#define EXYNOS_ARM_CORE2_CONFIGURATION				0x2100
-#define EXYNOS5420_ARM_CORE2_OPTION				0x2108
-#define EXYNOS_ARM_CORE3_CONFIGURATION				0x2180
-#define EXYNOS5420_ARM_CORE3_OPTION				0x2188
-#define EXYNOS5420_ARM_COMMON_STATUS				0x2504
-#define EXYNOS5420_ARM_COMMON_OPTION				0x2508
-#define EXYNOS5420_KFC_COMMON_STATUS				0x2584
-#define EXYNOS5420_KFC_COMMON_OPTION				0x2588
-#define EXYNOS5420_LOGIC_RESET_DURATION3			0x2D1C
-
-#define EXYNOS5420_PAD_RET_GPIO_OPTION				0x30C8
-#define EXYNOS5420_PAD_RET_UART_OPTION				0x30E8
-#define EXYNOS5420_PAD_RET_MMCA_OPTION				0x3108
-#define EXYNOS5420_PAD_RET_MMCB_OPTION				0x3128
-#define EXYNOS5420_PAD_RET_MMCC_OPTION				0x3148
-#define EXYNOS5420_PAD_RET_HSI_OPTION				0x3168
-#define EXYNOS5420_PAD_RET_SPI_OPTION				0x31C8
-#define EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION			0x31E8
-#define EXYNOS_PAD_RET_DRAM_OPTION				0x3008
-#define EXYNOS_PAD_RET_MAUDIO_OPTION				0x3028
-#define EXYNOS_PAD_RET_JTAG_OPTION				0x3048
-#define EXYNOS_PAD_RET_GPIO_OPTION				0x3108
-#define EXYNOS_PAD_RET_UART_OPTION				0x3128
-#define EXYNOS_PAD_RET_MMCA_OPTION				0x3148
-#define EXYNOS_PAD_RET_MMCB_OPTION				0x3168
-#define EXYNOS_PAD_RET_EBIA_OPTION				0x3188
-#define EXYNOS_PAD_RET_EBIB_OPTION				0x31A8
-
-#define EXYNOS_PS_HOLD_CONTROL					0x330C
-
-/* For SYS_PWR_REG */
-#define EXYNOS_SYS_PWR_CFG					BIT(0)
-
-#define EXYNOS5420_MFC_CONFIGURATION				0x4060
-#define EXYNOS5420_MFC_STATUS					0x4064
-#define EXYNOS5420_MFC_OPTION					0x4068
-#define EXYNOS5420_G3D_CONFIGURATION				0x4080
-#define EXYNOS5420_G3D_STATUS					0x4084
-#define EXYNOS5420_G3D_OPTION					0x4088
-#define EXYNOS5420_DISP0_CONFIGURATION				0x40A0
-#define EXYNOS5420_DISP0_STATUS					0x40A4
-#define EXYNOS5420_DISP0_OPTION					0x40A8
-#define EXYNOS5420_DISP1_CONFIGURATION				0x40C0
-#define EXYNOS5420_DISP1_STATUS					0x40C4
-#define EXYNOS5420_DISP1_OPTION					0x40C8
-#define EXYNOS5420_MAU_CONFIGURATION				0x40E0
-#define EXYNOS5420_MAU_STATUS					0x40E4
-#define EXYNOS5420_MAU_OPTION					0x40E8
-#define EXYNOS5420_FSYS2_OPTION					0x4168
-#define EXYNOS5420_PSGEN_OPTION					0x4188
-
-/* For EXYNOS_CENTRAL_SEQ_OPTION */
-#define EXYNOS5_USE_STANDBYWFI_ARM_CORE0			BIT(16)
-#define EXYNOS5_USE_STANDBYWFI_ARM_CORE1			BUT(17)
-#define EXYNOS5_USE_STANDBYWFE_ARM_CORE0			BIT(24)
-#define EXYNOS5_USE_STANDBYWFE_ARM_CORE1			BIT(25)
-
-#define EXYNOS5420_ARM_USE_STANDBY_WFI0				BIT(4)
-#define EXYNOS5420_ARM_USE_STANDBY_WFI1				BIT(5)
-#define EXYNOS5420_ARM_USE_STANDBY_WFI2				BIT(6)
-#define EXYNOS5420_ARM_USE_STANDBY_WFI3				BIT(7)
-#define EXYNOS5420_KFC_USE_STANDBY_WFI0				BIT(8)
-#define EXYNOS5420_KFC_USE_STANDBY_WFI1				BIT(9)
-#define EXYNOS5420_KFC_USE_STANDBY_WFI2				BIT(10)
-#define EXYNOS5420_KFC_USE_STANDBY_WFI3				BIT(11)
-#define EXYNOS5420_ARM_USE_STANDBY_WFE0				BIT(16)
-#define EXYNOS5420_ARM_USE_STANDBY_WFE1				BIT(17)
-#define EXYNOS5420_ARM_USE_STANDBY_WFE2				BIT(18)
-#define EXYNOS5420_ARM_USE_STANDBY_WFE3				BIT(19)
-#define EXYNOS5420_KFC_USE_STANDBY_WFE0				BIT(20)
-#define EXYNOS5420_KFC_USE_STANDBY_WFE1				BIT(21)
-#define EXYNOS5420_KFC_USE_STANDBY_WFE2				BIT(22)
-#define EXYNOS5420_KFC_USE_STANDBY_WFE3				BIT(23)
-
-#define DUR_WAIT_RESET				0xF
-
-#define EXYNOS5420_USE_STANDBY_WFI_ALL	(EXYNOS5420_ARM_USE_STANDBY_WFI0    \
-					 | EXYNOS5420_ARM_USE_STANDBY_WFI1  \
-					 | EXYNOS5420_ARM_USE_STANDBY_WFI2  \
-					 | EXYNOS5420_ARM_USE_STANDBY_WFI3  \
-					 | EXYNOS5420_KFC_USE_STANDBY_WFI0  \
-					 | EXYNOS5420_KFC_USE_STANDBY_WFI1  \
-					 | EXYNOS5420_KFC_USE_STANDBY_WFI2  \
-					 | EXYNOS5420_KFC_USE_STANDBY_WFI3)
-
-#endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index f572219c7..06332f626 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -19,10 +19,13 @@
 #include <linux/cpu_pm.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
 #include <linux/err.h>
 #include <linux/regulator/machine.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -31,14 +34,11 @@
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 
+#include <mach/map.h>
+
 #include <plat/pm-common.h>
-#include <plat/regs-srom.h>
 
 #include "common.h"
-#include "regs-pmu.h"
-#include "exynos-pmu.h"
-
-#define S5P_CHECK_SLEEP 0x00000BAD
 
 #define REG_TABLE_END (-1U)
 
@@ -54,15 +54,6 @@ struct exynos_wkup_irq {
 	u32 mask;
 };
 
-static struct sleep_save exynos_core_save[] = {
-	/* SROM side */
-	SAVE_ITEM(S5P_SROM_BW),
-	SAVE_ITEM(S5P_SROM_BC0),
-	SAVE_ITEM(S5P_SROM_BC1),
-	SAVE_ITEM(S5P_SROM_BC2),
-	SAVE_ITEM(S5P_SROM_BC3),
-};
-
 struct exynos_pm_data {
 	const struct exynos_wkup_irq *wkup_irq;
 	unsigned int wake_disable_mask;
@@ -179,54 +170,57 @@ static struct irq_chip exynos_pmu_chip = {
 #endif
 };
 
-static int exynos_pmu_domain_xlate(struct irq_domain *domain,
-				   struct device_node *controller,
-				   const u32 *intspec,
-				   unsigned int intsize,
-				   unsigned long *out_hwirq,
-				   unsigned int *out_type)
+static int exynos_pmu_domain_translate(struct irq_domain *d,
+				       struct irq_fwspec *fwspec,
+				       unsigned long *hwirq,
+				       unsigned int *type)
 {
-	if (domain->of_node != controller)
-		return -EINVAL;	/* Shouldn't happen, really... */
-	if (intsize != 3)
-		return -EINVAL;	/* Not GIC compliant */
-	if (intspec[0] != 0)
-		return -EINVAL;	/* No PPI should point to this domain */
+	if (is_of_node(fwspec->fwnode)) {
+		if (fwspec->param_count != 3)
+			return -EINVAL;
 
-	*out_hwirq = intspec[1];
-	*out_type = intspec[2];
-	return 0;
+		/* No PPI should point to this domain */
+		if (fwspec->param[0] != 0)
+			return -EINVAL;
+
+		*hwirq = fwspec->param[1];
+		*type = fwspec->param[2];
+		return 0;
+	}
+
+	return -EINVAL;
 }
 
 static int exynos_pmu_domain_alloc(struct irq_domain *domain,
 				   unsigned int virq,
 				   unsigned int nr_irqs, void *data)
 {
-	struct of_phandle_args *args = data;
-	struct of_phandle_args parent_args;
+	struct irq_fwspec *fwspec = data;
+	struct irq_fwspec parent_fwspec;
 	irq_hw_number_t hwirq;
 	int i;
 
-	if (args->args_count != 3)
+	if (fwspec->param_count != 3)
 		return -EINVAL;	/* Not GIC compliant */
-	if (args->args[0] != 0)
+	if (fwspec->param[0] != 0)
 		return -EINVAL;	/* No PPI should point to this domain */
 
-	hwirq = args->args[1];
+	hwirq = fwspec->param[1];
 
 	for (i = 0; i < nr_irqs; i++)
 		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
 					      &exynos_pmu_chip, NULL);
 
-	parent_args = *args;
-	parent_args.np = domain->parent->of_node;
-	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
+	parent_fwspec = *fwspec;
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+					    &parent_fwspec);
 }
 
 static const struct irq_domain_ops exynos_pmu_domain_ops = {
-	.xlate	= exynos_pmu_domain_xlate,
-	.alloc	= exynos_pmu_domain_alloc,
-	.free	= irq_domain_free_irqs_common,
+	.translate	= exynos_pmu_domain_translate,
+	.alloc		= exynos_pmu_domain_alloc,
+	.free		= irq_domain_free_irqs_common,
 };
 
 static int __init exynos_pmu_irq_init(struct device_node *node,
@@ -261,10 +255,16 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 		return -ENOMEM;
 	}
 
+	/*
+	 * Clear the OF_POPULATED flag set in of_irq_init so that
+	 * later the Exynos PMU platform device won't be skipped.
+	 */
+	of_node_clear_flag(node, OF_POPULATED);
+
 	return 0;
 }
 
-#define EXYNOS_PMU_IRQ(symbol, name)	OF_DECLARE_2(irqchip, symbol, name, exynos_pmu_irq_init)
+#define EXYNOS_PMU_IRQ(symbol, name)	IRQCHIP_DECLARE(symbol, name, exynos_pmu_irq_init)
 
 EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
 EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
@@ -307,7 +307,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 
-	__raw_writel(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+	writel_relaxed(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
 
 	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
 		mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
@@ -331,7 +331,7 @@ static void exynos_pm_enter_sleep_mode(void)
 {
 	/* Set value of power down register for sleep mode */
 	exynos_sys_powerdown_conf(SYS_SLEEP);
-	pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
+	pmu_raw_writel(EXYNOS_SLEEP_MAGIC, S5P_INFORM1);
 }
 
 static void exynos_pm_prepare(void)
@@ -341,8 +341,6 @@ static void exynos_pm_prepare(void)
 	/* Set wake-up mask registers */
 	exynos_pm_set_wakeup_mask();
 
-	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
 	exynos_pm_enter_sleep_mode();
 
 	/* ensure at least INFORM0 has the resume address */
@@ -373,8 +371,6 @@ static void exynos5420_pm_prepare(void)
 	/* Set wake-up mask registers */
 	exynos_pm_set_wakeup_mask();
 
-	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
 	exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
 	/*
 	 * The cpu state needs to be saved and restored so that the
@@ -383,8 +379,8 @@ static void exynos5420_pm_prepare(void)
 	 * needs to restore it back in case, the primary cpu fails to
 	 * suspend for any reason.
 	 */
-	exynos5420_cpu_state = __raw_readl(sysram_base_addr +
-						EXYNOS5420_CPU_STATE);
+	exynos5420_cpu_state = readl_relaxed(sysram_base_addr +
+					     EXYNOS5420_CPU_STATE);
 
 	exynos_pm_enter_sleep_mode();
 
@@ -465,8 +461,6 @@ static void exynos_pm_resume(void)
 	/* For release retention */
 	exynos_pm_release_retention();
 
-	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
 	if (cpuid == ARM_CPU_PART_CORTEX_A9)
 		scu_enable(S5P_VA_SCU);
 
@@ -516,11 +510,11 @@ static void exynos5420_pm_resume(void)
 	/* Restore the CPU0 low power state register */
 	tmp = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
 	pmu_raw_writel(tmp | S5P_CORE_LOCAL_PWR_EN,
-		EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+		       EXYNOS5_ARM_CORE0_SYS_PWR_REG);
 
 	/* Restore the sysram cpu state register */
-	__raw_writel(exynos5420_cpu_state,
-		sysram_base_addr + EXYNOS5420_CPU_STATE);
+	writel_relaxed(exynos5420_cpu_state,
+		       sysram_base_addr + EXYNOS5420_CPU_STATE);
 
 	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
 			S5P_CENTRAL_SEQ_OPTION);
@@ -533,8 +527,6 @@ static void exynos5420_pm_resume(void)
 
 	pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
 
-	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
 early_wakeup:
 
 	tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1);
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index 07152d00f..cbbdd84cf 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -68,7 +68,6 @@ config ARCH_NETWINDER
 	select ISA
 	select ISA_DMA
 	select PCI
-	select VIRT_TO_BUS
 	help
 	  Say Y here if you intend to run this kernel on the Rebel.COM
 	  NetWinder.  Information about this machine can be found at:
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 9e8220e38..0f0c9e040 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -106,7 +106,7 @@ static void __init __fb_init_irq(void)
 
 	for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) {
 		irq_set_chip_and_handler(irq, &fb_chip, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 }
 
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index bf7aa7d29..810edc78c 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -57,34 +57,32 @@ static int ckevt_dc21285_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *c)
+static int ckevt_dc21285_shutdown(struct clock_event_device *c)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		*CSR_TIMER1_CLR = 0;
-		*CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
-		*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
-				   TIMER_CNTL_DIV16;
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		*CSR_TIMER1_CNTL = 0;
-		break;
-	}
+	*CSR_TIMER1_CNTL = 0;
+	return 0;
+}
+
+static int ckevt_dc21285_set_periodic(struct clock_event_device *c)
+{
+	*CSR_TIMER1_CLR = 0;
+	*CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+	*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
+			   TIMER_CNTL_DIV16;
+	return 0;
 }
 
 static struct clock_event_device ckevt_dc21285 = {
-	.name		= "dc21285_timer1",
-	.features	= CLOCK_EVT_FEAT_PERIODIC |
-			  CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.irq		= IRQ_TIMER1,
-	.set_next_event	= ckevt_dc21285_set_next_event,
-	.set_mode	= ckevt_dc21285_set_mode,
+	.name			= "dc21285_timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.irq			= IRQ_TIMER1,
+	.set_next_event		= ckevt_dc21285_set_next_event,
+	.set_state_shutdown	= ckevt_dc21285_shutdown,
+	.set_state_periodic	= ckevt_dc21285_set_periodic,
+	.set_state_oneshot	= ckevt_dc21285_shutdown,
+	.tick_resume		= ckevt_dc21285_set_periodic,
 };
 
 static irqreturn_t timer1_interrupt(int irq, void *dev_id)
@@ -94,7 +92,7 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
 	*CSR_TIMER1_CLR = 0;
 
 	/* Stop the timer if in one-shot mode */
-	if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
+	if (clockevent_state_oneshot(ce))
 		*CSR_TIMER1_CNTL = 0;
 
 	ce->event_handler(ce);
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index c3a0abbc9..c01fca11b 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -87,13 +87,12 @@ static struct irq_chip isa_hi_chip = {
 	.irq_unmask	= isa_unmask_pic_hi_irq,
 };
 
-static void
-isa_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void isa_irq_handler(struct irq_desc *desc)
 {
 	unsigned int isa_irq = *(unsigned char *)PCIIACK_BASE;
 
 	if (isa_irq < _ISA_IRQ(0) || isa_irq >= _ISA_IRQ(16)) {
-		do_bad_IRQ(isa_irq, desc);
+		do_bad_IRQ(desc);
 		return;
 	}
 
@@ -153,13 +152,13 @@ void __init isa_init_irq(unsigned int host_irq)
 		for (irq = _ISA_IRQ(0); irq < _ISA_IRQ(8); irq++) {
 			irq_set_chip_and_handler(irq, &isa_lo_chip,
 						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+			irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 		}
 
 		for (irq = _ISA_IRQ(8); irq < _ISA_IRQ(16); irq++) {
 			irq_set_chip_and_handler(irq, &isa_hi_chip,
 						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+			irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 		}
 
 		request_resource(&ioport_resource, &pic1_resource);
@@ -175,8 +174,8 @@ void __init isa_init_irq(unsigned int host_irq)
 		 * resistor on this line.
 		 */
 		if (machine_is_netwinder())
-			set_irq_flags(_ISA_IRQ(11), IRQF_VALID |
-				      IRQF_PROBE | IRQF_NOAUTOEN);
+			irq_modify_status(_ISA_IRQ(11),
+				IRQ_NOREQUEST | IRQ_NOPROBE, IRQ_NOAUTOEN);
 	}
 }
 
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index ca8a25bb3..18b12796a 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -18,7 +18,6 @@
 #include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/mdio-gpio.h>
 #include <linux/io.h>
 
 #include <asm/setup.h>
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 418188cd1..14c56f3f0 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -15,7 +15,6 @@
 #include <linux/input.h>
 #include <linux/skbuff.h>
 #include <linux/gpio_keys.h>
-#include <linux/mdio-gpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 266b26509..6070282ce 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -15,7 +15,6 @@
 #include <linux/input.h>
 #include <linux/skbuff.h>
 #include <linux/gpio_keys.h>
-#include <linux/mdio-gpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index 3292f2e6e..469a76ea0 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -126,7 +126,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
 	return 0;
 }
 
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void gpio_irq_handler(struct irq_desc *desc)
 {
 	unsigned int port = (unsigned int)irq_desc_get_handler_data(desc);
 	unsigned int gpio_irq_no, irq_stat;
@@ -220,12 +220,12 @@ void __init gemini_gpio_init(void)
 		     j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
 			irq_set_chip_and_handler(j, &gpio_irq_chip,
 						 handle_edge_irq);
-			set_irq_flags(j, IRQF_VALID);
+			irq_clear_status_flags(j, IRQ_NOREQUEST);
 		}
 
 		irq_set_chained_handler_and_data(IRQ_GPIO(i), gpio_irq_handler,
 						 (void *)i);
 	}
 
-	BUG_ON(gpiochip_add(&gemini_gpio_chip));
+	BUG_ON(gpiochip_add_data(&gemini_gpio_chip, NULL));
 }
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
index 98e7b0f28..f0390f184 100644
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -57,9 +57,6 @@
 #define GEMINI_USB1_BASE	0x69000000
 #define GEMINI_BIG_ENDIAN_BASE	0x80000000
 
-#define GEMINI_TIMER1_BASE	GEMINI_TIMER_BASE
-#define GEMINI_TIMER2_BASE	(GEMINI_TIMER_BASE + 0x10)
-#define GEMINI_TIMER3_BASE	(GEMINI_TIMER_BASE + 0x20)
 
 /*
  * UART Clock when System clk is 150MHz
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index 44f50dcb6..d929b3ff1 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -92,7 +92,7 @@ void __init gemini_init_irq(void)
 		} else {			
 			irq_set_handler(i, handle_level_irq);
 		}
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	/* Disable all interrupts */
diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
index 0a63c4d25..f5f18df5a 100644
--- a/arch/arm/mach-gemini/time.c
+++ b/arch/arm/mach-gemini/time.c
@@ -15,93 +15,147 @@
 #include <asm/mach/time.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
+#include <linux/sched_clock.h>
 
 /*
  * Register definitions for the timers
  */
-#define TIMER_COUNT(BASE_ADDR)		(BASE_ADDR  + 0x00)
-#define TIMER_LOAD(BASE_ADDR)		(BASE_ADDR  + 0x04)
-#define TIMER_MATCH1(BASE_ADDR)		(BASE_ADDR  + 0x08)
-#define TIMER_MATCH2(BASE_ADDR)		(BASE_ADDR  + 0x0C)
-#define TIMER_CR(BASE_ADDR)		(BASE_ADDR  + 0x30)
-
-#define TIMER_1_CR_ENABLE		(1 << 0)
-#define TIMER_1_CR_CLOCK		(1 << 1)
-#define TIMER_1_CR_INT			(1 << 2)
-#define TIMER_2_CR_ENABLE		(1 << 3)
-#define TIMER_2_CR_CLOCK		(1 << 4)
-#define TIMER_2_CR_INT			(1 << 5)
-#define TIMER_3_CR_ENABLE		(1 << 6)
-#define TIMER_3_CR_CLOCK		(1 << 7)
-#define TIMER_3_CR_INT			(1 << 8)
+
+#define TIMER1_BASE		GEMINI_TIMER_BASE
+#define TIMER2_BASE		(GEMINI_TIMER_BASE + 0x10)
+#define TIMER3_BASE		(GEMINI_TIMER_BASE + 0x20)
+
+#define TIMER_COUNT(BASE)	(IO_ADDRESS(BASE) + 0x00)
+#define TIMER_LOAD(BASE)	(IO_ADDRESS(BASE) + 0x04)
+#define TIMER_MATCH1(BASE)	(IO_ADDRESS(BASE) + 0x08)
+#define TIMER_MATCH2(BASE)	(IO_ADDRESS(BASE) + 0x0C)
+#define TIMER_CR		(IO_ADDRESS(GEMINI_TIMER_BASE) + 0x30)
+#define TIMER_INTR_STATE	(IO_ADDRESS(GEMINI_TIMER_BASE) + 0x34)
+#define TIMER_INTR_MASK		(IO_ADDRESS(GEMINI_TIMER_BASE) + 0x38)
+
+#define TIMER_1_CR_ENABLE	(1 << 0)
+#define TIMER_1_CR_CLOCK	(1 << 1)
+#define TIMER_1_CR_INT		(1 << 2)
+#define TIMER_2_CR_ENABLE	(1 << 3)
+#define TIMER_2_CR_CLOCK	(1 << 4)
+#define TIMER_2_CR_INT		(1 << 5)
+#define TIMER_3_CR_ENABLE	(1 << 6)
+#define TIMER_3_CR_CLOCK	(1 << 7)
+#define TIMER_3_CR_INT		(1 << 8)
+#define TIMER_1_CR_UPDOWN	(1 << 9)
+#define TIMER_2_CR_UPDOWN	(1 << 10)
+#define TIMER_3_CR_UPDOWN	(1 << 11)
+#define TIMER_DEFAULT_FLAGS	(TIMER_1_CR_UPDOWN | \
+				 TIMER_3_CR_ENABLE | \
+				 TIMER_3_CR_UPDOWN)
+
+#define TIMER_1_INT_MATCH1	(1 << 0)
+#define TIMER_1_INT_MATCH2	(1 << 1)
+#define TIMER_1_INT_OVERFLOW	(1 << 2)
+#define TIMER_2_INT_MATCH1	(1 << 3)
+#define TIMER_2_INT_MATCH2	(1 << 4)
+#define TIMER_2_INT_OVERFLOW	(1 << 5)
+#define TIMER_3_INT_MATCH1	(1 << 6)
+#define TIMER_3_INT_MATCH2	(1 << 7)
+#define TIMER_3_INT_OVERFLOW	(1 << 8)
+#define TIMER_INT_ALL_MASK	0x1ff
+
 
 static unsigned int tick_rate;
 
+static u64 notrace gemini_read_sched_clock(void)
+{
+	return readl(TIMER_COUNT(TIMER3_BASE));
+}
+
 static int gemini_timer_set_next_event(unsigned long cycles,
 				       struct clock_event_device *evt)
 {
 	u32 cr;
 
-	cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+	/* Setup the match register */
+	cr = readl(TIMER_COUNT(TIMER1_BASE));
+	writel(cr + cycles, TIMER_MATCH1(TIMER1_BASE));
+	if (readl(TIMER_COUNT(TIMER1_BASE)) - cr > cycles)
+		return -ETIME;
 
-	/* This may be overdoing it, feel free to test without this */
-	cr &= ~TIMER_2_CR_ENABLE;
-	cr &= ~TIMER_2_CR_INT;
-	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+	return 0;
+}
 
-	/* Set next event */
-	writel(cycles, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	writel(cycles, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	cr |= TIMER_2_CR_ENABLE;
-	cr |= TIMER_2_CR_INT;
-	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+static int gemini_timer_shutdown(struct clock_event_device *evt)
+{
+	u32 cr;
+
+	/*
+	 * Disable also for oneshot: the set_next() call will arm the timer
+	 * instead.
+	 */
+	/* Stop timer and interrupt. */
+	cr = readl(TIMER_CR);
+	cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
+	writel(cr, TIMER_CR);
+
+	/* Setup counter start from 0 */
+	writel(0, TIMER_COUNT(TIMER1_BASE));
+	writel(0, TIMER_LOAD(TIMER1_BASE));
+
+	/* enable interrupt */
+	cr = readl(TIMER_INTR_MASK);
+	cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
+	cr |= TIMER_1_INT_MATCH1;
+	writel(cr, TIMER_INTR_MASK);
+
+	/* start the timer */
+	cr = readl(TIMER_CR);
+	cr |= TIMER_1_CR_ENABLE;
+	writel(cr, TIMER_CR);
 
 	return 0;
 }
 
-static void gemini_timer_set_mode(enum clock_event_mode mode,
-				  struct clock_event_device *evt)
+static int gemini_timer_set_periodic(struct clock_event_device *evt)
 {
 	u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
 	u32 cr;
 
-	switch (mode) {
-        case CLOCK_EVT_MODE_PERIODIC:
-		/* Start the timer */
-		writel(period,
-		       TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-		writel(period,
-		       TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-		cr |= TIMER_2_CR_ENABLE;
-		cr |= TIMER_2_CR_INT;
-		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-        case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		/*
-		 * Disable also for oneshot: the set_next() call will
-		 * arm the timer instead.
-		 */
-		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-		cr &= ~TIMER_2_CR_ENABLE;
-		cr &= ~TIMER_2_CR_INT;
-		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-		break;
-	default:
-                break;
-	}
+	/* Stop timer and interrupt */
+	cr = readl(TIMER_CR);
+	cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
+	writel(cr, TIMER_CR);
+
+	/* Setup timer to fire at 1/HT intervals. */
+	cr = 0xffffffff - (period - 1);
+	writel(cr, TIMER_COUNT(TIMER1_BASE));
+	writel(cr, TIMER_LOAD(TIMER1_BASE));
+
+	/* enable interrupt on overflow */
+	cr = readl(TIMER_INTR_MASK);
+	cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
+	cr |= TIMER_1_INT_OVERFLOW;
+	writel(cr, TIMER_INTR_MASK);
+
+	/* Start the timer */
+	cr = readl(TIMER_CR);
+	cr |= TIMER_1_CR_ENABLE;
+	cr |= TIMER_1_CR_INT;
+	writel(cr, TIMER_CR);
+
+	return 0;
 }
 
-/* Use TIMER2 as clock event */
+/* Use TIMER1 as clock event */
 static struct clock_event_device gemini_clockevent = {
-	.name		= "TIMER2",
-	.rating		= 300, /* Reasonably fast and accurate clock event */
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= gemini_timer_set_next_event,
-	.set_mode	= gemini_timer_set_mode,
+	.name			= "TIMER1",
+	/* Reasonably fast and accurate clock event */
+	.rating			= 300,
+	.shift                  = 32,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= gemini_timer_set_next_event,
+	.set_state_shutdown	= gemini_timer_shutdown,
+	.set_state_periodic	= gemini_timer_set_periodic,
+	.set_state_oneshot	= gemini_timer_shutdown,
+	.tick_resume		= gemini_timer_shutdown,
 };
 
 /*
@@ -151,20 +205,35 @@ void __init gemini_timer_init(void)
 	}
 
 	/*
-	 * Make irqs happen for the system timer
+	 * Reset the interrupt mask and status
 	 */
-	setup_irq(IRQ_TIMER2, &gemini_timer_irq);
-
-	/* Enable and use TIMER1 as clock source */
-	writel(0xffffffff, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)));
-	writel(0xffffffff, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER1_BASE)));
-	writel(TIMER_1_CR_ENABLE, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-	if (clocksource_mmio_init(TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)),
-				  "TIMER1", tick_rate, 300, 32,
-				  clocksource_mmio_readl_up))
-		pr_err("timer: failed to initialize gemini clock source\n");
-
-	/* Configure and register the clockevent */
+	writel(TIMER_INT_ALL_MASK, TIMER_INTR_MASK);
+	writel(0, TIMER_INTR_STATE);
+	writel(TIMER_DEFAULT_FLAGS, TIMER_CR);
+
+	/*
+	 * Setup free-running clocksource timer (interrupts
+	 * disabled.)
+	 */
+	writel(0, TIMER_COUNT(TIMER3_BASE));
+	writel(0, TIMER_LOAD(TIMER3_BASE));
+	writel(0, TIMER_MATCH1(TIMER3_BASE));
+	writel(0, TIMER_MATCH2(TIMER3_BASE));
+	clocksource_mmio_init(TIMER_COUNT(TIMER3_BASE),
+			      "gemini_clocksource", tick_rate,
+			      300, 32, clocksource_mmio_readl_up);
+	sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
+
+	/*
+	 * Setup clockevent timer (interrupt-driven.)
+	*/
+	writel(0, TIMER_COUNT(TIMER1_BASE));
+	writel(0, TIMER_LOAD(TIMER1_BASE));
+	writel(0, TIMER_MATCH1(TIMER1_BASE));
+	writel(0, TIMER_MATCH2(TIMER1_BASE));
+	setup_irq(IRQ_TIMER1, &gemini_timer_irq);
+	gemini_clockevent.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&gemini_clockevent, tick_rate,
 					1, 0xffffffff);
+
 }
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 31aa866c3..81110ec34 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_HIGHBANK
-	bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+	bool "Calxeda ECX-1000/2000 (Highbank/Midway)"
+	depends on ARCH_MULTI_V7
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SUPPORTS_BIG_ENDIAN
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 231fba0d0..07f60986d 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -23,13 +23,12 @@
 #include <linux/pl320-ipc.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/reboot.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
+#include <linux/psci.h>
 
-#include <asm/psci.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -163,8 +162,6 @@ static void __init highbank_init(void)
 
 	pl320_ipc_register_notifier(&hb_keys_nb);
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
 	if (psci_ops.cpu_suspend)
 		platform_device_register(&highbank_cpuidle_device);
 }
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 7f2bd85eb..400311695 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -16,19 +16,21 @@
 
 #include <linux/cpu_pm.h>
 #include <linux/init.h>
+#include <linux/psci.h>
 #include <linux/suspend.h>
 
 #include <asm/suspend.h>
-#include <asm/psci.h>
+
+#include <uapi/linux/psci.h>
+
+#define HIGHBANK_SUSPEND_PARAM \
+	((0 << PSCI_0_2_POWER_STATE_ID_SHIFT) | \
+	 (1 << PSCI_0_2_POWER_STATE_AFFL_SHIFT) | \
+	 (PSCI_POWER_STATE_TYPE_POWER_DOWN << PSCI_0_2_POWER_STATE_TYPE_SHIFT))
 
 static int highbank_suspend_finish(unsigned long val)
 {
-	const struct psci_power_state ps = {
-		.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
-		.affinity_level = 1,
-	};
-
-	return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
+	return psci_ops.cpu_suspend(HIGHBANK_SUSPEND_PARAM, __pa(cpu_resume));
 }
 
 static int highbank_pm_enter(suspend_state_t state)
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 83061ad0e..a3b091a4d 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -13,7 +13,8 @@ if ARCH_HISI
 menu "Hisilicon platform type"
 
 config ARCH_HI3xxx
-	bool "Hisilicon Hi36xx family" if ARCH_MULTI_V7
+	bool "Hisilicon Hi36xx family"
+	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
@@ -23,7 +24,8 @@ config ARCH_HI3xxx
 	  Support for Hisilicon Hi36xx SoC family
 
 config ARCH_HIP01
-       bool "Hisilicon HIP01 family" if ARCH_MULTI_V7
+       bool "Hisilicon HIP01 family"
+       depends on ARCH_MULTI_V7
        select HAVE_ARM_SCU if SMP
        select HAVE_ARM_TWD if SMP
        select ARM_GLOBAL_TIMER
@@ -31,7 +33,8 @@ config ARCH_HIP01
          Support for Hisilicon HIP01 SoC family
 
 config ARCH_HIP04
-	bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7
+	bool "Hisilicon HiP04 Cortex A15 family"
+	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select MCPM if SMP
@@ -40,7 +43,8 @@ config ARCH_HIP04
 	  Support for Hisilicon HiP04 SoC family
 
 config ARCH_HIX5HD2
-	bool "Hisilicon X5HD2 family" if ARCH_MULTI_V7
+	bool "Hisilicon X5HD2 family"
+	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h
index c7648ef18..e883583a2 100644
--- a/arch/arm/mach-hisi/core.h
+++ b/arch/arm/mach-hisi/core.h
@@ -6,17 +6,14 @@
 extern void hi3xxx_set_cpu_jump(int cpu, void *jump_addr);
 extern int hi3xxx_get_cpu_jump(int cpu);
 extern void secondary_startup(void);
-extern struct smp_operations hi3xxx_smp_ops;
 
 extern void hi3xxx_cpu_die(unsigned int cpu);
 extern int hi3xxx_cpu_kill(unsigned int cpu);
 extern void hi3xxx_set_cpu(int cpu, bool enable);
 
-extern struct smp_operations hix5hd2_smp_ops;
 extern void hix5hd2_set_cpu(int cpu, bool enable);
 extern void hix5hd2_cpu_die(unsigned int cpu);
 
-extern struct smp_operations hip01_smp_ops;
 extern void hip01_set_cpu(int cpu, bool enable);
 extern void hip01_cpu_die(unsigned int cpu);
 #endif
diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c
index c6bd7c7bd..c08c44ec5 100644
--- a/arch/arm/mach-hisi/hisilicon.c
+++ b/arch/arm/mach-hisi/hisilicon.c
@@ -11,7 +11,6 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
 
@@ -54,31 +53,3 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
 	.map_io		= hi3620_map_io,
 	.dt_compat	= hi3xxx_compat,
 MACHINE_END
-
-static const char *const hix5hd2_compat[] __initconst = {
-	"hisilicon,hix5hd2",
-	NULL,
-};
-
-DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
-	.dt_compat	= hix5hd2_compat,
-MACHINE_END
-
-static const char *const hip04_compat[] __initconst = {
-	"hisilicon,hip04-d01",
-	NULL,
-};
-
-DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)")
-	.dt_compat	= hip04_compat,
-MACHINE_END
-
-static const char *const hip01_compat[] __initconst = {
-	"hisilicon,hip01",
-	"hisilicon,hip01-ca9x2",
-	NULL,
-};
-
-DT_MACHINE_START(HIP01, "Hisilicon HIP01 (Flattened Device Tree)")
-	.dt_compat      = hip01_compat,
-MACHINE_END
diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c
index b5f8f5ffd..4b653a8cb 100644
--- a/arch/arm/mach-hisi/platmcpm.c
+++ b/arch/arm/mach-hisi/platmcpm.c
@@ -239,7 +239,7 @@ err:
 }
 #endif
 
-static struct smp_operations __initdata hip04_smp_ops = {
+static const struct smp_operations hip04_smp_ops __initconst = {
 	.smp_boot_secondary	= hip04_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= hip04_cpu_die,
diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
index 51744127d..e1d67648d 100644
--- a/arch/arm/mach-hisi/platsmp.c
+++ b/arch/arm/mach-hisi/platsmp.c
@@ -89,7 +89,7 @@ static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-struct smp_operations hi3xxx_smp_ops __initdata = {
+static const struct smp_operations hi3xxx_smp_ops __initconst = {
 	.smp_prepare_cpus	= hi3xxx_smp_prepare_cpus,
 	.smp_boot_secondary	= hi3xxx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -103,7 +103,7 @@ static void __init hisi_common_smp_prepare_cpus(unsigned int max_cpus)
 	hisi_enable_scu_a9();
 }
 
-void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
+static void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
 {
 	void __iomem *virt;
 
@@ -126,7 +126,7 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 }
 
 
-struct smp_operations hix5hd2_smp_ops __initdata = {
+static const struct smp_operations hix5hd2_smp_ops __initconst = {
 	.smp_prepare_cpus	= hisi_common_smp_prepare_cpus,
 	.smp_boot_secondary	= hix5hd2_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -139,7 +139,7 @@ struct smp_operations hix5hd2_smp_ops __initdata = {
 #define HIP01_BOOT_ADDRESS     0x80000000
 #define REG_SC_CTRL            0x000
 
-void hip01_set_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
+static void hip01_set_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
 {
 	void __iomem *virt;
 
@@ -176,7 +176,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-struct smp_operations hip01_smp_ops __initdata = {
+static const struct smp_operations hip01_smp_ops __initconst = {
 	.smp_prepare_cpus       = hisi_common_smp_prepare_cpus,
 	.smp_boot_secondary     = hip01_boot_secondary,
 };
diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c
index 134377352..cda330c93 100644
--- a/arch/arm/mach-imx/3ds_debugboard.c
+++ b/arch/arm/mach-imx/3ds_debugboard.c
@@ -85,7 +85,7 @@ static struct platform_device smsc_lan9217_device = {
 	.resource = smsc911x_resources,
 };
 
-static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
+static void mxc_expio_irq_handler(struct irq_desc *desc)
 {
 	u32 imr_val;
 	u32 int_valid;
@@ -94,8 +94,8 @@ static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
 	/* irq = gpio irq number */
 	desc->irq_data.chip->irq_mask(&desc->irq_data);
 
-	imr_val = __raw_readw(brd_io + INTR_MASK_REG);
-	int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
+	imr_val = imx_readw(brd_io + INTR_MASK_REG);
+	int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
 
 	expio_irq = 0;
 	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
@@ -117,17 +117,17 @@ static void expio_mask_irq(struct irq_data *d)
 	u16 reg;
 	u32 expio = d->hwirq;
 
-	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg = imx_readw(brd_io + INTR_MASK_REG);
 	reg |= (1 << expio);
-	__raw_writew(reg, brd_io + INTR_MASK_REG);
+	imx_writew(reg, brd_io + INTR_MASK_REG);
 }
 
 static void expio_ack_irq(struct irq_data *d)
 {
 	u32 expio = d->hwirq;
 
-	__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
-	__raw_writew(0, brd_io + INTR_RESET_REG);
+	imx_writew(1 << expio, brd_io + INTR_RESET_REG);
+	imx_writew(0, brd_io + INTR_RESET_REG);
 	expio_mask_irq(d);
 }
 
@@ -136,9 +136,9 @@ static void expio_unmask_irq(struct irq_data *d)
 	u16 reg;
 	u32 expio = d->hwirq;
 
-	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg = imx_readw(brd_io + INTR_MASK_REG);
 	reg &= ~(1 << expio);
-	__raw_writew(reg, brd_io + INTR_MASK_REG);
+	imx_writew(reg, brd_io + INTR_MASK_REG);
 }
 
 static struct irq_chip expio_irq_chip = {
@@ -162,9 +162,9 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio)
 	if (brd_io == NULL)
 		return -ENOMEM;
 
-	if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
-	    (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
-	    (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
+	if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
 		pr_info("3-Stack Debug board not detected\n");
 		iounmap(brd_io);
 		brd_io = NULL;
@@ -181,10 +181,10 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio)
 	gpio_direction_input(intr_gpio);
 
 	/* disable the interrupt and clear the status */
-	__raw_writew(0, brd_io + INTR_MASK_REG);
-	__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
-	__raw_writew(0, brd_io + INTR_RESET_REG);
-	__raw_writew(0x1F, brd_io + INTR_MASK_REG);
+	imx_writew(0, brd_io + INTR_MASK_REG);
+	imx_writew(0xFFFF, brd_io + INTR_RESET_REG);
+	imx_writew(0, brd_io + INTR_RESET_REG);
+	imx_writew(0x1F, brd_io + INTR_MASK_REG);
 
 	irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
 	WARN_ON(irq_base < 0);
@@ -195,7 +195,7 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio)
 
 	for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
 		irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
+		irq_clear_status_flags(i, IRQ_NOREQUEST);
 	}
 	irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW);
 	irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 573536f1b..ee9a318ca 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,9 +1,10 @@
 menuconfig ARCH_MXC
-	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_CPU_SUSPEND if PM
+	bool "Freescale i.MX family"
+	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select PINCTRL
 	select PM_OPP if PM
 	select SOC_BUS
@@ -43,9 +44,6 @@ config MXC_USE_EPIT
 	  uses the same clocks as the GPT. Anyway, on some systems the GPT
 	  may be in use for other purposes.
 
-config ARCH_HAS_RNGA
-	bool
-
 config HAVE_IMX_ANATOP
 	bool
 
@@ -89,7 +87,6 @@ config SOC_IMX27
 config SOC_IMX31
 	bool
 	select CPU_V6
-	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
@@ -510,6 +507,7 @@ config	SOC_IMX53
 
 config SOC_IMX6
 	bool
+	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_GIC
@@ -524,7 +522,7 @@ config SOC_IMX6Q
 	bool "i.MX6 Quad/DualLite support"
 	select ARM_ERRATA_764369 if SMP
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
+	select HAVE_ARM_TWD
 	select PCI_DOMAINS if PCI
 	select PINCTRL_IMX6Q
 	select SOC_IMX6
@@ -548,12 +546,22 @@ config SOC_IMX6SX
 	help
 	  This enables support for Freescale i.MX6 SoloX processor.
 
+config SOC_IMX6UL
+	bool "i.MX6 UltraLite support"
+	select PINCTRL_IMX6UL
+	select SOC_IMX6
+
+	help
+	  This enables support for Freescale i.MX6 UltraLite processor.
+
 config SOC_IMX7D
 	bool "i.MX7 Dual support"
 	select PINCTRL_IMX7D
 	select ARM_GIC
+	select HAVE_ARM_ARCH_TIMER
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
 	help
 		This enables support for Freescale i.MX7 Dual processor.
 
@@ -588,7 +596,8 @@ choice
 	default VF_USE_ARM_GLOBAL_TIMER
 
 	config VF_USE_ARM_GLOBAL_TIMER
-		bool "Use ARM Global Timer" if ARCH_MULTI_V7
+		bool "Use ARM Global Timer"
+		depends on ARCH_MULTI_V7
 		select ARM_GLOBAL_TIMER
 		select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 		help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 37c502ac9..9f5fffd62 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -3,13 +3,13 @@ obj-y := cpu.o system.o irq-common.o
 obj-$(CONFIG_SOC_IMX1) += mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
 
-obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o
+obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
 
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
@@ -83,6 +83,7 @@ endif
 obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o
+obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
 
 ifeq ($(CONFIG_SUSPEND),y)
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 231bb250c..649a84c25 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -129,7 +129,14 @@ void __init imx_init_revision_from_anatop(void)
 
 	switch (digprog & 0xff) {
 	case 0:
-		revision = IMX_CHIP_REVISION_1_0;
+		/*
+		 * For i.MX6QP, most of the code for i.MX6Q can be resued,
+		 * so internally, we identify it as i.MX6Q Rev 2.0
+		 */
+		if (digprog >> 8 & 0x01)
+			revision = IMX_CHIP_REVISION_2_0;
+		else
+			revision = IMX_CHIP_REVISION_1_0;
 		break;
 	case 1:
 		revision = IMX_CHIP_REVISION_1_1;
@@ -151,7 +158,14 @@ void __init imx_init_revision_from_anatop(void)
 		revision = IMX_CHIP_REVISION_1_5;
 		break;
 	default:
-		revision = IMX_CHIP_REVISION_UNKNOWN;
+		/*
+		 * Fail back to return raw register value instead of 0xff.
+		 * It will be easy to know version information in SOC if it
+		 * can't be recognized by known version. And some chip's (i.MX7D)
+		 * digprog value match linux version format, so it needn't map
+		 * again and we can use register value directly.
+		 */
+		revision = digprog & 0xff;
 	}
 
 	mxc_set_cpu_type(digprog >> 16 & 0xff);
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 1a8932335..1afccae04 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -55,23 +55,20 @@ static void __iomem *avic_base;
 static struct irq_domain *domain;
 
 #ifdef CONFIG_FIQ
-static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
+static int avic_set_irq_fiq(unsigned int hwirq, unsigned int type)
 {
-	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned int irqt;
 
-	irq = d->hwirq;
-
-	if (irq >= AVIC_NUM_IRQS)
+	if (hwirq >= AVIC_NUM_IRQS)
 		return -EINVAL;
 
-	if (irq < AVIC_NUM_IRQS / 2) {
-		irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
+	if (hwirq < AVIC_NUM_IRQS / 2) {
+		irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << hwirq);
+		imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEL);
 	} else {
-		irq -= AVIC_NUM_IRQS / 2;
-		irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
+		hwirq -= AVIC_NUM_IRQS / 2;
+		irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << hwirq);
+		imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEH);
 	}
 
 	return 0;
@@ -94,8 +91,8 @@ static void avic_irq_suspend(struct irq_data *d)
 	struct irq_chip_type *ct = gc->chip_types;
 	int idx = d->hwirq >> 5;
 
-	avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
-	__raw_writel(gc->wake_active, avic_base + ct->regs.mask);
+	avic_saved_mask_reg[idx] = imx_readl(avic_base + ct->regs.mask);
+	imx_writel(gc->wake_active, avic_base + ct->regs.mask);
 }
 
 static void avic_irq_resume(struct irq_data *d)
@@ -104,7 +101,7 @@ static void avic_irq_resume(struct irq_data *d)
 	struct irq_chip_type *ct = gc->chip_types;
 	int idx = d->hwirq >> 5;
 
-	__raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
+	imx_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
 }
 
 #else
@@ -140,7 +137,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
 	u32 nivector;
 
 	do {
-		nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16;
+		nivector = imx_readl(avic_base + AVIC_NIVECSR) >> 16;
 		if (nivector == 0xffff)
 			break;
 
@@ -164,16 +161,16 @@ void __init mxc_init_irq(void __iomem *irqbase)
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
 	 */
-	__raw_writel(0, avic_base + AVIC_INTCNTL);
-	__raw_writel(0x1f, avic_base + AVIC_NIMASK);
+	imx_writel(0, avic_base + AVIC_INTCNTL);
+	imx_writel(0x1f, avic_base + AVIC_NIMASK);
 
 	/* disable all interrupts */
-	__raw_writel(0, avic_base + AVIC_INTENABLEH);
-	__raw_writel(0, avic_base + AVIC_INTENABLEL);
+	imx_writel(0, avic_base + AVIC_INTENABLEH);
+	imx_writel(0, avic_base + AVIC_INTENABLEL);
 
 	/* all IRQ no FIQ */
-	__raw_writel(0, avic_base + AVIC_INTTYPEH);
-	__raw_writel(0, avic_base + AVIC_INTTYPEL);
+	imx_writel(0, avic_base + AVIC_INTTYPEH);
+	imx_writel(0, avic_base + AVIC_INTTYPEL);
 
 	irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id());
 	WARN_ON(irq_base < 0);
@@ -188,7 +185,7 @@ void __init mxc_init_irq(void __iomem *irqbase)
 
 	/* Set default priority value (0) for all IRQ's */
 	for (i = 0; i < 8; i++)
-		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
+		imx_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
 	set_handle_irq(avic_handle_irq);
 
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 21e4e8697..a8f469333 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -32,7 +32,6 @@ void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
 void mxc_init_irq(void __iomem *);
-void tzic_init_irq(void);
 void mx1_init_irq(void);
 void mx21_init_irq(void);
 void mx27_init_irq(void);
@@ -55,6 +54,7 @@ struct platform_device *mxc_register_gpio(char *name, int id,
 void mxc_set_cpu_type(unsigned int type);
 void mxc_restart(enum reboot_mode, const char *);
 void mxc_arch_reset_init(void __iomem *);
+void imx1_reset_init(void __iomem *);
 void imx_set_aips(void __iomem *);
 void imx_aips_allow_unprivileged_access(const char *compat);
 int mxc_device_init(void);
@@ -66,6 +66,8 @@ void imx_gpc_check_dt(void);
 void imx_gpc_set_arm_power_in_lpm(bool power_off);
 void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
 void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
+void imx25_pm_init(void);
+void imx27_pm_init(void);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */
@@ -131,6 +133,7 @@ void imx6q_pm_init(void);
 void imx6dl_pm_init(void);
 void imx6sl_pm_init(void);
 void imx6sx_pm_init(void);
+void imx6ul_pm_init(void);
 
 #ifdef CONFIG_PM
 void imx51_pm_init(void);
@@ -152,7 +155,7 @@ void imx_init_l2cache(void);
 static inline void imx_init_l2cache(void) {}
 #endif
 
-extern struct smp_operations imx_smp_ops;
-extern struct smp_operations ls1021a_smp_ops;
+extern const struct smp_operations imx_smp_ops;
+extern const struct smp_operations ls1021a_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index fe8d36f7e..8d2ae4091 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -39,8 +39,7 @@ static int mx27_read_cpu_rev(void)
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
-				+ SYS_CHIP_ID));
+	val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID));
 
 	mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
 
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index fde1860a2..3daf1959a 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -39,7 +39,7 @@ static int mx31_read_cpu_rev(void)
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
-	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+	srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
 	srev &= 0xff;
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index ec3aaa098..8a54234df 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -20,7 +20,7 @@ static int mx35_read_cpu_rev(void)
 {
 	u32 rev;
 
-	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+	rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
 	switch (rev) {
 	case 0x00:
 		return IMX_CHIP_REVISION_1_0;
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index 3403bac94..4f2d1c772 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -60,13 +60,9 @@ static int get_mx51_srev(void)
 /*
  * Returns:
  *	the silicon revision of the cpu
- *	-EINVAL - not a mx51
  */
 int mx51_revision(void)
 {
-	if (!cpu_is_mx51())
-		return -EINVAL;
-
 	if (mx5_cpu_rev == -1)
 		mx5_cpu_rev = get_mx51_srev();
 
@@ -112,13 +108,9 @@ static int get_mx53_srev(void)
 /*
  * Returns:
  *	the silicon revision of the cpu
- *	-EINVAL - not a mx53
  */
 int mx53_revision(void)
 {
-	if (!cpu_is_mx53())
-		return -EINVAL;
-
 	if (mx5_cpu_rev == -1)
 		mx5_cpu_rev = get_mx53_srev();
 
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index a7fa92a7b..b3347d323 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -10,8 +10,6 @@
 #include "common.h"
 
 unsigned int __mxc_cpu_type;
-EXPORT_SYMBOL(__mxc_cpu_type);
-
 static unsigned int imx_soc_revision;
 
 void mxc_set_cpu_type(unsigned int type)
@@ -45,20 +43,20 @@ void __init imx_set_aips(void __iomem *base)
  * Set all MPROTx to be non-bufferable, trusted for R/W,
  * not forced to user-mode.
  */
-	__raw_writel(0x77777777, base + 0x0);
-	__raw_writel(0x77777777, base + 0x4);
+	imx_writel(0x77777777, base + 0x0);
+	imx_writel(0x77777777, base + 0x4);
 
 /*
  * Set all OPACRx to be non-bufferable, to not require
  * supervisor privilege level for access, allow for
  * write access and untrusted master access.
  */
-	__raw_writel(0x0, base + 0x40);
-	__raw_writel(0x0, base + 0x44);
-	__raw_writel(0x0, base + 0x48);
-	__raw_writel(0x0, base + 0x4C);
-	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
-	__raw_writel(reg, base + 0x50);
+	imx_writel(0x0, base + 0x40);
+	imx_writel(0x0, base + 0x44);
+	imx_writel(0x0, base + 0x48);
+	imx_writel(0x0, base + 0x4C);
+	reg = imx_readl(base + 0x50) & 0x00FFFFFF;
+	imx_writel(reg, base + 0x50);
 }
 
 void __init imx_aips_allow_unprivileged_access(
@@ -130,6 +128,9 @@ struct device * __init imx_soc_device_init(void)
 	case MXC_CPU_IMX6Q:
 		soc_id = "i.MX6Q";
 		break;
+	case MXC_CPU_IMX6UL:
+		soc_id = "i.MX6UL";
+		break;
 	case MXC_CPU_IMX7D:
 		soc_id = "i.MX7D";
 		break;
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 353bb8774..db0f48c4b 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -10,6 +10,8 @@
 #include <linux/module.h>
 #include <asm/cpuidle.h>
 
+#include <soc/imx/cpuidle.h>
+
 #include "common.h"
 #include "cpuidle.h"
 #include "hardware.h"
@@ -62,6 +64,24 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
 	.safe_state_index = 0,
 };
 
+/*
+ * i.MX6 Q/DL has an erratum (ERR006687) that prevents the FEC from waking the
+ * CPUs when they are in wait(unclocked) state. As the hardware workaround isn't
+ * applicable to all boards, disable the deeper idle state when the workaround
+ * isn't present and the FEC is in use.
+ */
+void imx6q_cpuidle_fec_irqs_used(void)
+{
+	imx6q_cpuidle_driver.states[1].disabled = true;
+}
+EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_used);
+
+void imx6q_cpuidle_fec_irqs_unused(void)
+{
+	imx6q_cpuidle_driver.states[1].disabled = false;
+}
+EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused);
+
 int __init imx6q_cpuidle_init(void)
 {
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 3a5529892..6ffe57267 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -57,10 +57,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC
 config IMX_HAVE_PLATFORM_MXC_NAND
 	bool
 
-config IMX_HAVE_PLATFORM_MXC_RNGA
-	bool
-	select ARCH_HAS_RNGA
-
 config IMX_HAVE_PLATFORM_MXC_RTC
 	bool
 
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 67f7fb130..09cebd8ce 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -177,7 +177,7 @@ struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imxuart_platform_data *pdata);
 
 #include <linux/platform_data/video-mx3fb.h>
-#include <linux/platform_data/camera-mx3.h>
+#include <linux/platform_data/media/camera-mx3.h>
 struct imx_ipu_core_data {
 	resource_size_t iobase;
 	resource_size_t synirq;
@@ -192,7 +192,7 @@ struct platform_device *__init imx_add_mx3_sdc_fb(
 		const struct imx_ipu_core_data *data,
 		struct mx3fb_platform_data *pdata);
 
-#include <linux/platform_data/camera-mx2.h>
+#include <linux/platform_data/media/camera-mx2.h>
 struct imx_mx2_camera_data {
 	const char *devid;
 	resource_size_t iobasecsi;
diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c
index 8eab5440d..300451727 100644
--- a/arch/arm/mach-imx/devices/devices.c
+++ b/arch/arm/mach-imx/devices/devices.c
@@ -22,6 +22,9 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 
+#include "../common.h"
+#include "devices-common.h"
+
 struct device mxc_aips_bus = {
 	.init_name	= "mxc_aips",
 };
diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
index 26483fa94..cd1fe69d8 100644
--- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c
+++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
@@ -7,6 +7,7 @@
  * Free Software Foundation.
  */
 #include "devices-common.h"
+#include "../common.h"
 
 struct platform_device *__init mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
diff --git a/arch/arm/mach-imx/devices/platform-mxc_rnga.c b/arch/arm/mach-imx/devices/platform-mxc_rnga.c
deleted file mode 100644
index 851fbc8af..000000000
--- a/arch/arm/mach-imx/devices/platform-mxc_rnga.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-struct imx_mxc_rnga_data {
-	resource_size_t iobase;
-};
-
-#define imx_mxc_rnga_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _RNGA_BASE_ADDR,			\
-	}
-
-#ifdef CONFIG_SOC_IMX31
-static const struct imx_mxc_rnga_data imx31_mxc_rnga_data __initconst =
-	imx_mxc_rnga_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-static struct platform_device *__init imx_add_mxc_rnga(
-		const struct imx_mxc_rnga_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-	return imx_add_platform_device("mxc_rnga", -1,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
-
-static int __init imxXX_add_mxc_rnga(void)
-{
-	struct platform_device *ret;
-
-#if defined(CONFIG_SOC_IMX31)
-	if (cpu_is_mx31())
-		ret = imx_add_mxc_rnga(&imx31_mxc_rnga_data);
-	else
-#endif /* if defined(CONFIG_SOC_IMX31) */
-		ret = ERR_PTR(-ENODEV);
-
-	return PTR_ERR_OR_ZERO(ret);
-}
-arch_initcall(imxXX_add_mxc_rnga);
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index a5edd7d60..3d039ef02 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -71,6 +71,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
 	if (!pdata)
 		pdata = &default_esdhc_pdata;
 
-	return imx_add_platform_device(data->devid, data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+	return imx_add_platform_device_dmamask(data->devid, data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata),
+			DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index 074b1a81b..fb9a73a57 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -57,7 +57,6 @@
 #include "hardware.h"
 
 static struct clock_event_device clockevent_epit;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
 static void __iomem *timer_base;
 
@@ -65,23 +64,23 @@ static inline void epit_irq_disable(void)
 {
 	u32 val;
 
-	val = __raw_readl(timer_base + EPITCR);
+	val = imx_readl(timer_base + EPITCR);
 	val &= ~EPITCR_OCIEN;
-	__raw_writel(val, timer_base + EPITCR);
+	imx_writel(val, timer_base + EPITCR);
 }
 
 static inline void epit_irq_enable(void)
 {
 	u32 val;
 
-	val = __raw_readl(timer_base + EPITCR);
+	val = imx_readl(timer_base + EPITCR);
 	val |= EPITCR_OCIEN;
-	__raw_writel(val, timer_base + EPITCR);
+	imx_writel(val, timer_base + EPITCR);
 }
 
 static void epit_irq_acknowledge(void)
 {
-	__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
+	imx_writel(EPITSR_OCIF, timer_base + EPITSR);
 }
 
 static int __init epit_clocksource_init(struct clk *timer_clk)
@@ -99,15 +98,15 @@ static int epit_set_next_event(unsigned long evt,
 {
 	unsigned long tcmp;
 
-	tcmp = __raw_readl(timer_base + EPITCNR);
+	tcmp = imx_readl(timer_base + EPITCNR);
 
-	__raw_writel(tcmp - evt, timer_base + EPITCMPR);
+	imx_writel(tcmp - evt, timer_base + EPITCMPR);
 
 	return 0;
 }
 
-static void epit_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
+/* Left event sources disabled, no more interrupts appear */
+static int epit_shutdown(struct clock_event_device *evt)
 {
 	unsigned long flags;
 
@@ -120,39 +119,41 @@ static void epit_set_mode(enum clock_event_mode mode,
 	/* Disable interrupt in GPT module */
 	epit_irq_disable();
 
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-
-		/* Clear pending interrupt */
-		epit_irq_acknowledge();
-	}
+	/* Clear pending interrupt */
+	epit_irq_acknowledge();
 
-	/* Remember timer mode */
-	clockevent_mode = mode;
 	local_irq_restore(flags);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR "epit_set_mode: Periodic mode is not "
-				"supported for i.MX EPIT\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
+	return 0;
+}
+
+static int epit_set_oneshot(struct clock_event_device *evt)
+{
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call epit_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in GPT module */
+	epit_irq_disable();
+
+	/* Clear pending interrupt, only while switching mode */
+	if (!clockevent_state_oneshot(evt))
+		epit_irq_acknowledge();
+
 	/*
 	 * Do not put overhead of interrupt enable/disable into
 	 * epit_set_next_event(), the core has about 4 minutes
 	 * to call epit_set_next_event() or shutdown clock after
 	 * mode switching
 	 */
-		local_irq_save(flags);
-		epit_irq_enable();
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
+	epit_irq_enable();
+	local_irq_restore(flags);
+
+	return 0;
 }
 
 /*
@@ -176,11 +177,13 @@ static struct irqaction epit_timer_irq = {
 };
 
 static struct clock_event_device clockevent_epit = {
-	.name		= "epit",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= epit_set_mode,
-	.set_next_event	= epit_set_next_event,
-	.rating		= 200,
+	.name			= "epit",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= epit_shutdown,
+	.tick_resume		= epit_shutdown,
+	.set_state_oneshot	= epit_set_oneshot,
+	.set_next_event		= epit_set_next_event,
+	.rating			= 200,
 };
 
 static int __init epit_clockevent_init(struct clk *timer_clk)
@@ -210,11 +213,11 @@ void __init epit_timer_init(void __iomem *base, int irq)
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
 	 */
-	__raw_writel(0x0, timer_base + EPITCR);
+	imx_writel(0x0, timer_base + EPITCR);
 
-	__raw_writel(0xffffffff, timer_base + EPITLR);
-	__raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
-			timer_base + EPITCR);
+	imx_writel(0xffffffff, timer_base + EPITLR);
+	imx_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
+		   timer_base + EPITCR);
 
 	/* init and register the timer to the framework */
 	epit_clocksource_init(timer_clk);
diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h
deleted file mode 100644
index bb2c90d65..000000000
--- a/arch/arm/mach-imx/eukrea-baseboards.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on board-pcm038.h which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_EUKREA_BASEBOARDS_H__
-#define __MACH_EUKREA_BASEBOARDS_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init()
- *
- * This example here is for the development board. Refer
- * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
- * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
- */
-
-extern void eukrea_mbimxsd25_baseboard_init(void);
-extern void eukrea_mbimxsd35_baseboard_init(void);
-
-#endif
-
-#endif /* __MACH_EUKREA_BASEBOARDS_H__ */
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 8c4467fad..0df062d8b 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -176,45 +177,48 @@ static struct irq_chip imx_gpc_chip = {
 	.irq_unmask		= imx_gpc_irq_unmask,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
 	.irq_set_wake		= imx_gpc_irq_set_wake,
+	.irq_set_type           = irq_chip_set_type_parent,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	= irq_chip_set_affinity_parent,
 #endif
 };
 
-static int imx_gpc_domain_xlate(struct irq_domain *domain,
-				struct device_node *controller,
-				const u32 *intspec,
-				unsigned int intsize,
-				unsigned long *out_hwirq,
-				unsigned int *out_type)
+static int imx_gpc_domain_translate(struct irq_domain *d,
+				    struct irq_fwspec *fwspec,
+				    unsigned long *hwirq,
+				    unsigned int *type)
 {
-	if (domain->of_node != controller)
-		return -EINVAL;	/* Shouldn't happen, really... */
-	if (intsize != 3)
-		return -EINVAL;	/* Not GIC compliant */
-	if (intspec[0] != 0)
-		return -EINVAL;	/* No PPI should point to this domain */
+	if (is_of_node(fwspec->fwnode)) {
+		if (fwspec->param_count != 3)
+			return -EINVAL;
 
-	*out_hwirq = intspec[1];
-	*out_type = intspec[2];
-	return 0;
+		/* No PPI should point to this domain */
+		if (fwspec->param[0] != 0)
+			return -EINVAL;
+
+		*hwirq = fwspec->param[1];
+		*type = fwspec->param[2];
+		return 0;
+	}
+
+	return -EINVAL;
 }
 
 static int imx_gpc_domain_alloc(struct irq_domain *domain,
 				  unsigned int irq,
 				  unsigned int nr_irqs, void *data)
 {
-	struct of_phandle_args *args = data;
-	struct of_phandle_args parent_args;
+	struct irq_fwspec *fwspec = data;
+	struct irq_fwspec parent_fwspec;
 	irq_hw_number_t hwirq;
 	int i;
 
-	if (args->args_count != 3)
+	if (fwspec->param_count != 3)
 		return -EINVAL;	/* Not GIC compliant */
-	if (args->args[0] != 0)
+	if (fwspec->param[0] != 0)
 		return -EINVAL;	/* No PPI should point to this domain */
 
-	hwirq = args->args[1];
+	hwirq = fwspec->param[1];
 	if (hwirq >= GPC_MAX_IRQS)
 		return -EINVAL;	/* Can't deal with this */
 
@@ -222,15 +226,16 @@ static int imx_gpc_domain_alloc(struct irq_domain *domain,
 		irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
 					      &imx_gpc_chip, NULL);
 
-	parent_args = *args;
-	parent_args.np = domain->parent->of_node;
-	return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
+	parent_fwspec = *fwspec;
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs,
+					    &parent_fwspec);
 }
 
 static const struct irq_domain_ops imx_gpc_domain_ops = {
-	.xlate	= imx_gpc_domain_xlate,
-	.alloc	= imx_gpc_domain_alloc,
-	.free	= irq_domain_free_irqs_common,
+	.translate	= imx_gpc_domain_translate,
+	.alloc		= imx_gpc_domain_alloc,
+	.free		= irq_domain_free_irqs_common,
 };
 
 static int __init imx_gpc_init(struct device_node *node,
@@ -266,14 +271,15 @@ static int __init imx_gpc_init(struct device_node *node,
 	for (i = 0; i < IMR_NUM; i++)
 		writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4);
 
+	/*
+	 * Clear the OF_POPULATED flag set in of_irq_init so that
+	 * later the GPC power domain driver will not be skipped.
+	 */
+	of_node_clear_flag(node, OF_POPULATED);
+
 	return 0;
 }
-
-/*
- * We cannot use the IRQCHIP_DECLARE macro that lives in
- * drivers/irqchip, so we're forced to roll our own. Not very nice.
- */
-OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
+IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
 
 void __init imx_gpc_check_dt(void)
 {
@@ -374,8 +380,13 @@ static struct pu_domain imx6q_pu_domain = {
 		.name = "PU",
 		.power_off = imx6q_pm_pu_power_off,
 		.power_on = imx6q_pm_pu_power_on,
-		.power_off_latency_ns = 25000,
-		.power_on_latency_ns = 2000000,
+		.states = {
+			[0] = {
+				.power_off_latency_ns = 25000,
+				.power_on_latency_ns = 2000000,
+			},
+		},
+		.state_count = 1,
 	},
 };
 
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index b5e976816..6c28d28b3 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -12,6 +12,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 diag_reg_offset:
 	.word	g_diag_reg - .
@@ -25,6 +26,7 @@ diag_reg_offset:
 	.endm
 
 ENTRY(v7_secondary_startup)
+ARM_BE8(setend be)			@ go BE8 if entered LE
 	set_diag_reg
 	b	secondary_startup
 ENDPROC(v7_secondary_startup)
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index bd42d1bd1..a754b8a48 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -18,15 +18,6 @@
 #include "common.h"
 #include "mx27.h"
 
-static void __init imx27_dt_init(void)
-{
-	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	platform_device_register_full(&devinfo);
-}
-
 static const char * const imx27_dt_board_compat[] __initconst = {
 	"fsl,imx27",
 	NULL
@@ -36,6 +27,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
 	.init_irq	= mx27_init_irq,
-	.init_machine	= imx27_dt_init,
+	.init_late	= imx27_pm_init,
 	.dt_compat	= imx27_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index 32100222a..62e6b4fb5 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -28,10 +28,22 @@ static void __init imx31_dt_timer_init(void)
 	mx31_clocks_init_dt();
 }
 
+/* FIXME: replace with DT binding */
+static const struct resource imx31_rnga_res[] __initconst = {
+	DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
+};
+
+static void __init imx31_dt_mach_init(void)
+{
+	platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
+					ARRAY_SIZE(imx31_rnga_res));
+}
+
 DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
 	.map_io		= mx31_map_io,
 	.init_early	= imx31_init_early,
 	.init_irq	= mx31_init_irq,
 	.init_time	= imx31_dt_timer_init,
+	.init_machine	= imx31_dt_mach_init,
 	.dt_compat	= imx31_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
index e93960372..99bb63ded 100644
--- a/arch/arm/mach-imx/imx35-dt.c
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -20,20 +20,16 @@
 #include "common.h"
 #include "mx35.h"
 
-static void __init imx35_irq_init(void)
-{
-	imx_init_l2cache();
-	mx35_init_irq();
-}
-
 static const char * const imx35_dt_board_compat[] __initconst = {
 	"fsl,imx35",
 	NULL
 };
 
 DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.map_io		= mx35_map_io,
 	.init_early	= imx35_init_early,
-	.init_irq	= imx35_irq_init,
+	.init_irq	= mx35_init_irq,
 	.dt_compat	= imx35_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index 6dd22cabf..3982e91b2 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -57,10 +57,10 @@ void mxc_iomux_mode(unsigned int pin_mode)
 
 	spin_lock(&gpio_mux_lock);
 
-	l = __raw_readl(reg);
+	l = imx_readl(reg);
 	l &= ~(0xff << (field * 8));
 	l |= mode << (field * 8);
-	__raw_writel(l, reg);
+	imx_writel(l, reg);
 
 	spin_unlock(&gpio_mux_lock);
 }
@@ -82,10 +82,10 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 
 	spin_lock(&gpio_mux_lock);
 
-	l = __raw_readl(reg);
+	l = imx_readl(reg);
 	l &= ~(0x1ff << (field * 10));
 	l |= config << (field * 10);
-	__raw_writel(l, reg);
+	imx_writel(l, reg);
 
 	spin_unlock(&gpio_mux_lock);
 }
@@ -100,7 +100,7 @@ int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
 
 	if (pad >= (PIN_MAX + 1)) {
-		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n",
 			pad, label ? label : "?");
 		return -EINVAL;
 	}
@@ -163,12 +163,12 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
 	u32 l;
 
 	spin_lock(&gpio_mux_lock);
-	l = __raw_readl(IOMUXGPR);
+	l = imx_readl(IOMUXGPR);
 	if (en)
 		l |= gp;
 	else
 		l &= ~gp;
 
-	__raw_writel(l, IOMUXGPR);
+	imx_writel(l, IOMUXGPR);
 	spin_unlock(&gpio_mux_lock);
 }
diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c
index ecd543664..7aa90c863 100644
--- a/arch/arm/mach-imx/iomux-v1.c
+++ b/arch/arm/mach-imx/iomux-v1.c
@@ -38,12 +38,12 @@ static unsigned imx_iomuxv1_numports;
 
 static inline unsigned long imx_iomuxv1_readl(unsigned offset)
 {
-	return __raw_readl(imx_iomuxv1_baseaddr + offset);
+	return imx_readl(imx_iomuxv1_baseaddr + offset);
 }
 
 static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
 {
-	__raw_writel(val, imx_iomuxv1_baseaddr + offset);
+	imx_writel(val, imx_iomuxv1_baseaddr + offset);
 }
 
 static inline void imx_iomuxv1_rmwl(unsigned offset,
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
index a53b2e64f..ca59d5f2e 100644
--- a/arch/arm/mach-imx/iomux-v3.c
+++ b/arch/arm/mach-imx/iomux-v3.c
@@ -45,13 +45,13 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 	u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
 
 	if (mux_ctrl_ofs)
-		__raw_writel(mux_mode, base + mux_ctrl_ofs);
+		imx_writel(mux_mode, base + mux_ctrl_ofs);
 
 	if (sel_input_ofs)
-		__raw_writel(sel_input, base + sel_input_ofs);
+		imx_writel(sel_input, base + sel_input_ofs);
 
 	if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
-		__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+		imx_writel(pad_ctrl, base + pad_ctrl_ofs);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c
index 0a920d184..210d36eba 100644
--- a/arch/arm/mach-imx/irq-common.c
+++ b/arch/arm/mach-imx/irq-common.c
@@ -33,8 +33,10 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 	gc = irq_get_chip_data(irq);
 	if (gc && gc->private) {
 		exirq = gc->private;
-		if (exirq->set_irq_fiq)
-			ret = exirq->set_irq_fiq(irq, type);
+		if (exirq->set_irq_fiq) {
+			struct irq_data *d = irq_get_irq_data(irq);
+			ret = exirq->set_irq_fiq(irqd_to_hwirq(d), type);
+		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index f2060523b..eaee47a2f 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -525,8 +525,8 @@ static void __init armadillo5x0_init(void)
 	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
-	__raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) |
-					(1 << 30), mx3_ccm_base + MXC_CCM_RCSR);
+	imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
+		   mx3_ccm_base + MXC_CCM_RCSR);
 
 	/* RTC */
 	/* Get RTC IRQ and register the chip */
diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c
index 9379fd0a7..32dcb5e99 100644
--- a/arch/arm/mach-imx/mach-imx25.c
+++ b/arch/arm/mach-imx/mach-imx25.c
@@ -41,6 +41,7 @@ static const char * const imx25_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.init_early	= imx25_init_early,
+	.init_late      = imx25_pm_init,
 	.init_irq	= mx25_init_irq,
 	.dt_compat	= imx25_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index ecf58b9e9..4cab5f612 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -22,6 +22,5 @@ static const char * const imx50_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
-	.init_irq	= tzic_init_irq,
 	.dt_compat	= imx50_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index b015129e4..3835b6a34 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -40,24 +40,20 @@ static void __init imx51_ipu_mipi_setup(void)
 	WARN_ON(!hsc_addr);
 
 	/* setup MIPI module to legacy mode */
-	__raw_writel(0xf00, hsc_addr);
+	imx_writel(0xf00, hsc_addr);
 
 	/* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
-	__raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
-		hsc_addr + 0x800);
+	imx_writel(imx_readl(hsc_addr + 0x800) | 0x30ff, hsc_addr + 0x800);
 
 	iounmap(hsc_addr);
 }
 
 static void __init imx51_dt_init(void)
 {
-	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
-
 	imx51_ipu_mipi_setup();
 	imx_src_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	platform_device_register_full(&devinfo);
+	imx_aips_allow_unprivileged_access("fsl,imx51-aipstz");
 }
 
 static void __init imx51_init_late(void)
@@ -73,7 +69,6 @@ static const char * const imx51_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.init_early	= imx51_init_early,
-	.init_irq	= tzic_init_irq,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 86316a979..07c2e8dca 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -32,16 +32,12 @@ static void __init imx53_dt_init(void)
 {
 	imx_src_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
 	imx_aips_allow_unprivileged_access("fsl,imx53-aipstz");
 }
 
 static void __init imx53_init_late(void)
 {
 	imx53_pm_init();
-
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 }
 
 static const char * const imx53_dt_board_compat[] __initconst = {
@@ -51,7 +47,6 @@ static const char * const imx53_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.init_early	= imx53_init_early,
-	.init_irq	= tzic_init_irq,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 9602cc12d..97fd25105 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -220,7 +220,7 @@ static void __init imx6q_1588_init(void)
 				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
 				clksel);
 	else
-		pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
+		pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
 
 	clk_put(enet_ref);
 put_ptp_clk:
@@ -266,8 +266,11 @@ static void __init imx6q_init_machine(void)
 {
 	struct device *parent;
 
-	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
-			      imx_get_soc_revision());
+	if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
+		imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0);
+	else
+		imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+				imx_get_soc_revision());
 
 	parent = imx_soc_device_init();
 	if (parent == NULL)
@@ -275,7 +278,7 @@ static void __init imx6q_init_machine(void)
 
 	imx6q_enet_phy_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	imx_anatop_init();
 	cpu_is_imx6q() ?  imx6q_pm_init() : imx6dl_pm_init();
@@ -350,7 +353,7 @@ static void __init imx6q_opp_init(void)
 		return;
 	}
 
-	if (of_init_opp_table(cpu_dev)) {
+	if (dev_pm_opp_of_add_table(cpu_dev)) {
 		pr_warn("failed to init OPP table\n");
 		goto put_node;
 	}
@@ -399,10 +402,13 @@ static void __init imx6q_init_irq(void)
 static const char * const imx6q_dt_compat[] __initconst = {
 	"fsl,imx6dl",
 	"fsl,imx6q",
+	"fsl,imx6qp",
 	NULL,
 };
 
 DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 300326373..04084900d 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -52,7 +52,7 @@ static void __init imx6sl_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	imx6sl_fec_init();
 	imx_anatop_init();
@@ -75,6 +75,8 @@ static const char * const imx6sl_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.init_irq	= imx6sl_init_irq,
 	.init_machine	= imx6sl_init_machine,
 	.init_late      = imx6sl_init_late,
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 6a0b0614d..7f52d9b1e 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -72,7 +72,7 @@ static void __init imx6sx_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	imx6sx_enet_init();
 	imx_anatop_init();
@@ -103,6 +103,8 @@ static const char * const imx6sx_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.init_irq	= imx6sx_init_irq,
 	.init_machine	= imx6sx_init_machine,
 	.dt_compat	= imx6sx_dt_compat,
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
new file mode 100644
index 000000000..6bb7d9cf1
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/irqchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/micrel_phy.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+static void __init imx6ul_enet_clk_init(void)
+{
+	struct regmap *gpr;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");
+	if (!IS_ERR(gpr))
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6UL_GPR1_ENET_CLK_DIR,
+				   IMX6UL_GPR1_ENET_CLK_OUTPUT);
+	else
+		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
+
+}
+
+static int ksz8081_phy_fixup(struct phy_device *dev)
+{
+	if (dev && dev->interface == PHY_INTERFACE_MODE_MII) {
+		phy_write(dev, 0x1f, 0x8110);
+		phy_write(dev, 0x16, 0x201);
+	} else if (dev && dev->interface == PHY_INTERFACE_MODE_RMII) {
+		phy_write(dev, 0x1f, 0x8190);
+		phy_write(dev, 0x16, 0x202);
+	}
+
+	return 0;
+}
+
+static void __init imx6ul_enet_phy_init(void)
+{
+	if (IS_BUILTIN(CONFIG_PHYLIB))
+		phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK,
+					   ksz8081_phy_fixup);
+}
+
+static inline void imx6ul_enet_init(void)
+{
+	imx6ul_enet_clk_init();
+	imx6ul_enet_phy_init();
+}
+
+static void __init imx6ul_init_machine(void)
+{
+	struct device *parent;
+
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	of_platform_default_populate(NULL, NULL, parent);
+	imx6ul_enet_init();
+	imx_anatop_init();
+	imx6ul_pm_init();
+}
+
+static void __init imx6ul_init_irq(void)
+{
+	imx_init_revision_from_anatop();
+	imx_src_init();
+	irqchip_init();
+	imx6_pm_ccm_init("fsl,imx6ul-ccm");
+}
+
+static void __init imx6ul_init_late(void)
+{
+	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
+		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
+}
+
+static const char * const imx6ul_dt_compat[] __initconst = {
+	"fsl,imx6ul",
+	NULL,
+};
+
+DT_MACHINE_START(IMX6UL, "Freescale i.MX6 Ultralite (Device Tree)")
+	.init_irq	= imx6ul_init_irq,
+	.init_machine	= imx6ul_init_machine,
+	.init_late	= imx6ul_init_late,
+	.dt_compat	= imx6ul_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index 4d4a19099..26ca744d3 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -6,12 +6,85 @@
  * published by the Free Software Foundation.
  */
 #include <linux/irqchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
 
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+	u16 val;
+
+	/* Set RGMII IO voltage to 1.8V */
+	phy_write(dev, 0x1d, 0x1f);
+	phy_write(dev, 0x1e, 0x8);
+
+	/* disable phy AR8031 SmartEEE function. */
+	phy_write(dev, 0xd, 0x3);
+	phy_write(dev, 0xe, 0x805d);
+	phy_write(dev, 0xd, 0x4003);
+	val = phy_read(dev, 0xe);
+	val &= ~(0x1 << 8);
+	phy_write(dev, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(dev, 0x1d, 0x5);
+	val = phy_read(dev, 0x1e);
+	val |= 0x0100;
+	phy_write(dev, 0x1e, val);
+
+	return 0;
+}
+
+static int bcm54220_phy_fixup(struct phy_device *dev)
+{
+	/* enable RXC skew select RGMII copper mode */
+	phy_write(dev, 0x1e, 0x21);
+	phy_write(dev, 0x1f, 0x7ea8);
+	phy_write(dev, 0x1e, 0x2f);
+	phy_write(dev, 0x1f, 0x71b7);
+
+	return 0;
+}
+
+#define PHY_ID_AR8031	0x004dd074
+#define PHY_ID_BCM54220	0x600d8589
+
+static void __init imx7d_enet_phy_init(void)
+{
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+					   ar8031_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff,
+					   bcm54220_phy_fixup);
+	}
+}
+
+static void __init imx7d_enet_clk_sel(void)
+{
+	struct regmap *gpr;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx7d-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, 0);
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, 0);
+	} else {
+		pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n");
+	}
+}
+
+static inline void imx7d_enet_init(void)
+{
+	imx7d_enet_phy_init();
+	imx7d_enet_clk_sel();
+}
+
 static void __init imx7d_init_machine(void)
 {
 	struct device *parent;
@@ -20,8 +93,8 @@ static void __init imx7d_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	imx_anatop_init();
+	imx7d_enet_init();
 }
 
 static void __init imx7d_init_irq(void)
@@ -31,8 +104,9 @@ static void __init imx7d_init_irq(void)
 	irqchip_init();
 }
 
-static const char *imx7d_dt_compat[] __initconst = {
+static const char *const imx7d_dt_compat[] __initconst = {
 	"fsl,imx7d",
+	"fsl,imx7s",
 	NULL,
 };
 
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 703ce31d7..9986f9a69 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index eb1c3477c..a4c389eae 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -13,6 +13,8 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
+#include <linux/gpio/driver.h>
+/* Needed for gpio_to_irq() */
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
@@ -202,9 +204,9 @@ static struct i2c_board_info mx27ads_i2c_devices[] = {
 static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	if (value)
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+		imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
 	else
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
+		imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
 static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
@@ -243,7 +245,7 @@ static void __init mx27ads_regulator_init(void)
 	vchip->ngpio		= 1;
 	vchip->direction_output	= vgpio_dir_out;
 	vchip->set		= vgpio_set;
-	gpiochip_add(vchip);
+	gpiochip_add_data(vchip, NULL);
 
 	platform_device_register_data(NULL, "reg-fixed-voltage",
 				      PLATFORM_DEVID_AUTO,
@@ -364,7 +366,7 @@ static void __init mx27ads_timer_init(void)
 {
 	unsigned long fref = 26000000;
 
-	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+	if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
 		fref = 27000000;
 
 	mx27_clocks_init(fref);
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index d08c37c69..4f2c56d44 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -154,14 +154,14 @@ static inline void mxc_init_imx_uart(void)
 	imx31_add_imx_uart0(&uart_pdata);
 }
 
-static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
+static void mx31ads_expio_irq_handler(struct irq_desc *desc)
 {
 	u32 imr_val;
 	u32 int_valid;
 	u32 expio_irq;
 
-	imr_val = __raw_readw(PBC_INTMASK_SET_REG);
-	int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
+	imr_val = imx_readw(PBC_INTMASK_SET_REG);
+	int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val;
 
 	expio_irq = 0;
 	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
@@ -180,8 +180,8 @@ static void expio_mask_irq(struct irq_data *d)
 {
 	u32 expio = d->hwirq;
 	/* mask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
-	__raw_readw(PBC_INTMASK_CLEAR_REG);
+	imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
+	imx_readw(PBC_INTMASK_CLEAR_REG);
 }
 
 /*
@@ -192,7 +192,7 @@ static void expio_ack_irq(struct irq_data *d)
 {
 	u32 expio = d->hwirq;
 	/* clear the interrupt status */
-	__raw_writew(1 << expio, PBC_INTSTATUS_REG);
+	imx_writew(1 << expio, PBC_INTSTATUS_REG);
 }
 
 /*
@@ -203,7 +203,7 @@ static void expio_unmask_irq(struct irq_data *d)
 {
 	u32 expio = d->hwirq;
 	/* unmask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
+	imx_writew(1 << expio, PBC_INTMASK_SET_REG);
 }
 
 static struct irq_chip expio_irq_chip = {
@@ -226,8 +226,8 @@ static void __init mx31ads_init_expio(void)
 	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
 	/* disable the interrupt and clear the status */
-	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
-	__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
+	imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
+	imx_writew(0xFFFF, PBC_INTSTATUS_REG);
 
 	irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
 	WARN_ON(irq_base < 0);
@@ -238,7 +238,7 @@ static void __init mx31ads_init_expio(void)
 
 	for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
 		irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
+		irq_clear_status_flags(i, IRQ_NOREQUEST);
 	}
 	irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4));
 	irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index bb6f8a52a..4f2d99888 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -509,7 +509,7 @@ static void mx31moboard_poweroff(void)
 
 	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
 
-	__raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+	imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 }
 
 static int mx31moboard_baseboard;
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index a213e7b9c..34df64f13 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -131,7 +131,7 @@ static void qong_init_nor_mtd(void)
  */
 static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *nand_chip = mtd->priv;
+	struct nand_chip *nand_chip = mtd_to_nand(mtd);
 
 	if (cmd == NAND_CMD_NONE)
 		return;
@@ -190,9 +190,9 @@ static struct platform_device qong_nand_device = {
 static void __init qong_init_nand_mtd(void)
 {
 	/* init CS */
-	__raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
-	__raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
-	__raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
+	imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
+	imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
+	imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
 
 	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index e065fedb3..9a42f19be 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -50,7 +50,7 @@ void __init mx1_init_irq(void)
 
 void __init imx1_soc_init(void)
 {
-	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
+	imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
 	mxc_device_init();
 
 	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 7d82a5a5b..862b9b776 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -98,4 +98,6 @@ void __init imx27_soc_init(void)
 	/* imx27 has the imx21 type audmux */
 	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
 					ARRAY_SIZE(imx27_audmux_res));
+
+	imx27_pm_init();
 }
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 0256e17d2..500d13df6 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/io.h>
 #include <linux/pinctrl/machine.h>
 
 #include <asm/pgtable.h>
@@ -38,8 +39,6 @@ static void imx3_idle(void)
 {
 	unsigned long reg = 0;
 
-	mx3_cpu_lp_set(MX3_WAIT);
-
 	__asm__ __volatile__(
 		/* disable I and D cache */
 		"mrc p15, 0, %0, c1, c0, 0\n"
@@ -135,11 +134,20 @@ void __init mx31_map_io(void)
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
+static void imx31_idle(void)
+{
+	int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_LPM_MASK;
+	imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
+
+	imx3_idle();
+}
+
 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	arch_ioremap_caller = imx3_ioremap_caller;
-	arm_pm_idle = imx3_idle;
+	arm_pm_idle = imx31_idle;
 	mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
 }
 
@@ -167,6 +175,10 @@ static const struct resource imx31_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
 };
 
+static const struct resource imx31_rnga_res[] __initconst = {
+	DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
+};
+
 void __init imx31_soc_init(void)
 {
 	int to_version = mx31_revision() >> 4;
@@ -195,6 +207,8 @@ void __init imx31_soc_init(void)
 
 	platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
 					ARRAY_SIZE(imx31_audmux_res));
+	platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
+					ARRAY_SIZE(imx31_rnga_res));
 }
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
@@ -212,11 +226,21 @@ void __init mx35_map_io(void)
 	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 }
 
+static void imx35_idle(void)
+{
+	int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_LPM_MASK;
+	reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
+	imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
+
+	imx3_idle();
+}
+
 void __init imx35_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	arm_pm_idle = imx3_idle;
+	arm_pm_idle = imx35_idle;
 	arch_ioremap_caller = imx3_ioremap_caller;
 	mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
 }
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index c4436d4fd..34f2ff625 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -38,111 +38,14 @@
 #define MXC_CPU_IMX6DL		0x61
 #define MXC_CPU_IMX6SX		0x62
 #define MXC_CPU_IMX6Q		0x63
+#define MXC_CPU_IMX6UL		0x64
 #define MXC_CPU_IMX7D		0x72
 
 #define IMX_DDR_TYPE_LPDDR2		1
 
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
-#endif
-
-#ifdef CONFIG_SOC_IMX1
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX1
-# endif
-# define cpu_is_mx1()		(mxc_cpu_type == MXC_CPU_MX1)
-#else
-# define cpu_is_mx1()		(0)
-#endif
 
-#ifdef CONFIG_SOC_IMX21
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX21
-# endif
-# define cpu_is_mx21()		(mxc_cpu_type == MXC_CPU_MX21)
-#else
-# define cpu_is_mx21()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX25
-# endif
-# define cpu_is_mx25()		(mxc_cpu_type == MXC_CPU_MX25)
-#else
-# define cpu_is_mx25()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX27
-# endif
-# define cpu_is_mx27()		(mxc_cpu_type == MXC_CPU_MX27)
-#else
-# define cpu_is_mx27()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX31
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX31
-# endif
-# define cpu_is_mx31()		(mxc_cpu_type == MXC_CPU_MX31)
-#else
-# define cpu_is_mx31()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX35
-# endif
-# define cpu_is_mx35()		(mxc_cpu_type == MXC_CPU_MX35)
-#else
-# define cpu_is_mx35()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX51
-# endif
-# define cpu_is_mx51()		(mxc_cpu_type == MXC_CPU_MX51)
-#else
-# define cpu_is_mx51()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX53
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX53
-# endif
-# define cpu_is_mx53()		(mxc_cpu_type == MXC_CPU_MX53)
-#else
-# define cpu_is_mx53()		(0)
-#endif
-
-#ifndef __ASSEMBLY__
 #ifdef CONFIG_SOC_IMX6SL
 static inline bool cpu_is_imx6sl(void)
 {
@@ -165,6 +68,11 @@ static inline bool cpu_is_imx6sx(void)
 	return __mxc_cpu_type == MXC_CPU_IMX6SX;
 }
 
+static inline bool cpu_is_imx6ul(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6UL;
+}
+
 static inline bool cpu_is_imx6q(void)
 {
 	return __mxc_cpu_type == MXC_CPU_IMX6Q;
@@ -184,7 +92,9 @@ int tzic_enable_wake(void);
 extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif
 
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
-#define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
+#define imx_readl	readl_relaxed
+#define imx_readw	readw_relaxed
+#define imx_writel	writel_relaxed
+#define imx_writew	writew_relaxed
 
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 7f270015f..711dbbd5b 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -88,7 +88,7 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
 	sync_cache_w(&g_diag_reg);
 }
 
-struct smp_operations  imx_smp_ops __initdata = {
+const struct smp_operations imx_smp_ops __initconst = {
 	.smp_init_cpus		= imx_smp_init_cpus,
 	.smp_prepare_cpus	= imx_smp_prepare_cpus,
 	.smp_boot_secondary	= imx_boot_secondary,
@@ -123,7 +123,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
 	iounmap(dcfg_base);
 }
 
-struct smp_operations  ls1021a_smp_ops __initdata = {
+const struct smp_operations ls1021a_smp_ops __initconst = {
 	.smp_prepare_cpus	= ls1021a_smp_prepare_cpus,
 	.smp_boot_secondary	= ls1021a_boot_secondary,
 };
diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c
new file mode 100644
index 000000000..8bba9fcd9
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx25.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2016 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+
+static int imx25_suspend_enter(suspend_state_t state)
+{
+	if (!IS_ENABLED(CONFIG_PM))
+		return 0;
+
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		cpu_do_idle();
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct platform_suspend_ops imx25_suspend_ops = {
+	.enter = imx25_suspend_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+void __init imx25_pm_init(void)
+{
+	suspend_set_ops(&imx25_suspend_ops);
+}
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index 56d02d064..d94353556 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -19,9 +19,9 @@ static int mx27_suspend_enter(suspend_state_t state)
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		/* Clear MPEN and SPEN to disable MPLL/SPLL */
-		cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
 		cscr &= 0xFFFFFFFC;
-		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
 		/* Executes WFI */
 		cpu_do_idle();
 		break;
@@ -37,13 +37,7 @@ static const struct platform_suspend_ops mx27_suspend_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
-static int __init mx27_pm_init(void)
+void __init imx27_pm_init(void)
 {
-	if (!cpu_is_mx27())
-		return 0;
-
 	suspend_set_ops(&mx27_suspend_ops);
-	return 0;
 }
-
-device_initcall(mx27_pm_init);
diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c
deleted file mode 100644
index 6a07006ff..000000000
--- a/arch/arm/mach-imx/pm-imx3.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/io.h>
-
-#include "common.h"
-#include "crmregs-imx3.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-
-/*
- * Set cpu low power mode before WFI instruction. This function is called
- * mx3 because it can be used for mx31 and mx35.
- * Currently only WAIT_MODE is supported.
- */
-void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
-{
-	int reg = __raw_readl(mx3_ccm_base + MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_LPM_MASK;
-
-	switch (mode) {
-	case MX3_WAIT:
-		if (cpu_is_mx35())
-			reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
-		__raw_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
-		break;
-	default:
-		pr_err("Unknown cpu power mode: %d\n", mode);
-		return;
-	}
-}
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 1885676c2..868781fd4 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -153,15 +153,15 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 	int stop_mode = 0;
 
 	/* always allow platform to issue a deep sleep mode request */
-	plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
+	plat_lpc = imx_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
 	    ~(MXC_CORTEXA8_PLAT_LPC_DSM);
-	ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) &
+	ccm_clpcr = imx_readl(ccm_base + MXC_CCM_CLPCR) &
 		    ~(MXC_CCM_CLPCR_LPM_MASK);
-	arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
+	arm_srpgcr = imx_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
 		     ~(MXC_SRPGCR_PCR);
-	empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
+	empgc0 = imx_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
 		 ~(MXC_SRPGCR_PCR);
-	empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
+	empgc1 = imx_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
 		 ~(MXC_SRPGCR_PCR);
 
 	switch (mode) {
@@ -196,17 +196,17 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 		return;
 	}
 
-	__raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
-	__raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
-	__raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
-	__raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
+	imx_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
+	imx_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
+	imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
+	imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
 
 	if (stop_mode) {
 		empgc0 |= MXC_SRPGCR_PCR;
 		empgc1 |= MXC_SRPGCR_PCR;
 
-		__raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
+		imx_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+		imx_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
 	}
 }
 
@@ -228,8 +228,8 @@ static int mx5_suspend_enter(suspend_state_t state)
 		flush_cache_all();
 
 		/*clear the EMPGC0/1 bits */
-		__raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
+		imx_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+		imx_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
 
 		if (imx5_suspend_in_ocram_fn)
 			imx5_suspend_in_ocram_fn(suspend_ocram_base);
@@ -297,7 +297,7 @@ static int __init imx_suspend_alloc_ocram(
 		goto put_node;
 	}
 
-	ocram_pool = gen_pool_get(&pdev->dev);
+	ocram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 93ecf559d..fe708e26d 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -93,6 +93,7 @@ struct imx6_pm_socdata {
 	const char *src_compat;
 	const char *iomuxc_compat;
 	const char *gpc_compat;
+	const char *pl310_compat;
 	const u32 mmdc_io_num;
 	const u32 *mmdc_io_offset;
 };
@@ -137,11 +138,19 @@ static const u32 imx6sx_mmdc_io_offset[] __initconst = {
 	0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
 };
 
+static const u32 imx6ul_mmdc_io_offset[] __initconst = {
+	0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */
+	0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */
+	0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */
+	0x494, 0x4b0,	            /* MODE_CTL, MODE, */
+};
+
 static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
 	.mmdc_compat = "fsl,imx6q-mmdc",
 	.src_compat = "fsl,imx6q-src",
 	.iomuxc_compat = "fsl,imx6q-iomuxc",
 	.gpc_compat = "fsl,imx6q-gpc",
+	.pl310_compat = "arm,pl310-cache",
 	.mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
 	.mmdc_io_offset = imx6q_mmdc_io_offset,
 };
@@ -151,6 +160,7 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
 	.src_compat = "fsl,imx6q-src",
 	.iomuxc_compat = "fsl,imx6dl-iomuxc",
 	.gpc_compat = "fsl,imx6q-gpc",
+	.pl310_compat = "arm,pl310-cache",
 	.mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
 	.mmdc_io_offset = imx6dl_mmdc_io_offset,
 };
@@ -160,6 +170,7 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
 	.src_compat = "fsl,imx6sl-src",
 	.iomuxc_compat = "fsl,imx6sl-iomuxc",
 	.gpc_compat = "fsl,imx6sl-gpc",
+	.pl310_compat = "arm,pl310-cache",
 	.mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
 	.mmdc_io_offset = imx6sl_mmdc_io_offset,
 };
@@ -169,10 +180,21 @@ static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
 	.src_compat = "fsl,imx6sx-src",
 	.iomuxc_compat = "fsl,imx6sx-iomuxc",
 	.gpc_compat = "fsl,imx6sx-gpc",
+	.pl310_compat = "arm,pl310-cache",
 	.mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
 	.mmdc_io_offset = imx6sx_mmdc_io_offset,
 };
 
+static const struct imx6_pm_socdata imx6ul_pm_data __initconst = {
+	.mmdc_compat = "fsl,imx6ul-mmdc",
+	.src_compat = "fsl,imx6ul-src",
+	.iomuxc_compat = "fsl,imx6ul-iomuxc",
+	.gpc_compat = "fsl,imx6ul-gpc",
+	.pl310_compat = NULL,
+	.mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset),
+	.mmdc_io_offset = imx6ul_mmdc_io_offset,
+};
+
 /*
  * This structure is for passing necessary data for low level ocram
  * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
@@ -273,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val &= ~BM_CLPCR_SBYOS;
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
-		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -288,9 +310,9 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl())
-			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+			val |= BM_CLPCR_BYPASS_PMIC_READY;
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -330,6 +352,10 @@ static int imx6q_suspend_finish(unsigned long val)
 		 * as we need to float DDR IO.
 		 */
 		local_flush_tlb_all();
+		/* check if need to flush internal L2 cache */
+		if (!((struct imx6_cpu_pm_info *)
+			suspend_ocram_base)->l2_base.vbase)
+			flush_cache_all();
 		imx6_suspend_in_ocram_fn(suspend_ocram_base);
 	}
 
@@ -451,7 +477,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 		goto put_node;
 	}
 
-	ocram_pool = gen_pool_get(&pdev->dev);
+	ocram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
@@ -470,6 +496,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
 		MX6Q_SUSPEND_OCRAM_SIZE, false);
 
+	memset(suspend_ocram_base, 0, sizeof(*pm_info));
 	pm_info = suspend_ocram_base;
 	pm_info->pbase = ocram_pbase;
 	pm_info->resume_addr = virt_to_phys(v7_cpu_resume);
@@ -505,11 +532,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 		goto gpc_map_failed;
 	}
 
-	ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache");
-	if (ret) {
-		pr_warn("%s: failed to get pl310-cache base %d!\n",
-			__func__, ret);
-		goto pl310_cache_map_failed;
+	if (socdata->pl310_compat) {
+		ret = imx6_pm_get_base(&pm_info->l2_base, socdata->pl310_compat);
+		if (ret) {
+			pr_warn("%s: failed to get pl310-cache base %d!\n",
+				__func__, ret);
+			goto pl310_cache_map_failed;
+		}
 	}
 
 	pm_info->ddr_type = imx_mmdc_get_ddr_type();
@@ -532,13 +561,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	goto put_node;
 
 pl310_cache_map_failed:
-	iounmap(&pm_info->gpc_base.vbase);
+	iounmap(pm_info->gpc_base.vbase);
 gpc_map_failed:
-	iounmap(&pm_info->iomuxc_base.vbase);
+	iounmap(pm_info->iomuxc_base.vbase);
 iomuxc_map_failed:
-	iounmap(&pm_info->src_base.vbase);
+	iounmap(pm_info->src_base.vbase);
 src_map_failed:
-	iounmap(&pm_info->mmdc_base.vbase);
+	iounmap(pm_info->mmdc_base.vbase);
 put_node:
 	of_node_put(node);
 
@@ -610,3 +639,8 @@ void __init imx6sx_pm_init(void)
 {
 	imx6_pm_common_init(&imx6sx_pm_data);
 }
+
+void __init imx6ul_pm_init(void)
+{
+	imx6_pm_common_init(&imx6ul_pm_data);
+}
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 45f7f4e0a..70b083fe9 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -73,7 +73,7 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev,
 	return 0;
 }
 
-static struct reset_control_ops imx_src_ops = {
+static const struct reset_control_ops imx_src_ops = {
 	.reset = imx_src_reset_module,
 };
 
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index b99987b02..76ee2ceec 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -79,12 +79,15 @@
 	/* sync L2 cache to drain L2's buffers to DRAM. */
 #ifdef CONFIG_CACHE_L2X0
 	ldr	r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET]
+	teq	r11, #0
+	beq	6f
 	mov	r6, #0x0
 	str	r6, [r11, #L2X0_CACHE_SYNC]
 1:
 	ldr	r6, [r11, #L2X0_CACHE_SYNC]
 	ands	r6, r6, #0x1
 	bne	1b
+6:
 #endif
 
 	.endm
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 51c35013b..c06af650e 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -34,27 +34,21 @@
 
 static void __iomem *wdog_base;
 static struct clk *wdog_clk;
+static int wcr_enable = (1 << 2);
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void mxc_restart(enum reboot_mode mode, const char *cmd)
 {
-	unsigned int wcr_enable;
-
 	if (!wdog_base)
 		goto reset_fallback;
 
 	if (!IS_ERR(wdog_clk))
 		clk_enable(wdog_clk);
 
-	if (cpu_is_mx1())
-		wcr_enable = (1 << 0);
-	else
-		wcr_enable = (1 << 2);
-
 	/* Assert SRS signal */
-	__raw_writew(wcr_enable, wdog_base);
+	imx_writew(wcr_enable, wdog_base);
 	/*
 	 * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
 	 * written twice), we add another two writes to ensure there must be at
@@ -62,8 +56,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
 	 * the target check here, since the writes shouldn't be a huge burden
 	 * for other platforms.
 	 */
-	__raw_writew(wcr_enable, wdog_base);
-	__raw_writew(wcr_enable, wdog_base);
+	imx_writew(wcr_enable, wdog_base);
+	imx_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */
 	mdelay(500);
@@ -89,6 +83,14 @@ void __init mxc_arch_reset_init(void __iomem *base)
 		clk_prepare(wdog_clk);
 }
 
+#ifdef CONFIG_SOC_IMX1
+void __init imx1_reset_init(void __iomem *base)
+{
+	wcr_enable = (1 << 0);
+	mxc_arch_reset_init(base);
+}
+#endif
+
 #ifdef CONFIG_CACHE_L2X0
 void __init imx_init_l2cache(void)
 {
@@ -98,34 +100,28 @@ void __init imx_init_l2cache(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
 	if (!np)
-		goto out;
+		return;
 
 	l2x0_base = of_iomap(np, 0);
-	if (!l2x0_base) {
-		of_node_put(np);
-		goto out;
-	}
+	if (!l2x0_base)
+		goto put_node;
 
-	/* Configure the L2 PREFETCH and POWER registers */
-	val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
-	val |= 0x70800000;
-	/*
-	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
-	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
-	 * But according to ARM PL310 errata: 752271
-	 * ID: 752271: Double linefill feature can cause data corruption
-	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
-	 * Workaround: The only workaround to this erratum is to disable the
-	 * double linefill feature. This is the default behavior.
-	 */
-	if (cpu_is_imx6q())
-		val &= ~(1 << 30 | 1 << 23);
-	writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
+		/* Configure the L2 PREFETCH and POWER registers */
+		val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
+		val |= L310_PREFETCH_CTRL_DBL_LINEFILL |
+			L310_PREFETCH_CTRL_INSTR_PREFETCH |
+			L310_PREFETCH_CTRL_DATA_PREFETCH;
+
+		/* Set perfetch offset to improve performance */
+		val &= ~L310_PREFETCH_CTRL_OFFSET_MASK;
+		val |= 15;
+
+		writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
+	}
 
 	iounmap(l2x0_base);
+put_node:
 	of_node_put(np);
-
-out:
-	l2x0_of_init(0, ~0);
 }
 #endif
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 4de65eeda..4ca37c3f1 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -9,12 +9,11 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -56,19 +55,19 @@ static struct irq_domain *domain;
 #define TZIC_NUM_IRQS 128
 
 #ifdef CONFIG_FIQ
-static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
+static int tzic_set_irq_fiq(unsigned int hwirq, unsigned int type)
 {
 	unsigned int index, mask, value;
 
-	index = irq >> 5;
+	index = hwirq >> 5;
 	if (unlikely(index >= 4))
 		return -EINVAL;
-	mask = 1U << (irq & 0x1F);
+	mask = 1U << (hwirq & 0x1F);
 
-	value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
+	value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
 	if (type)
 		value &= ~mask;
-	__raw_writel(value, tzic_base + TZIC_INTSEC0(index));
+	imx_writel(value, tzic_base + TZIC_INTSEC0(index));
 
 	return 0;
 }
@@ -82,15 +81,15 @@ static void tzic_irq_suspend(struct irq_data *d)
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	int idx = d->hwirq >> 5;
 
-	__raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
+	imx_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
 }
 
 static void tzic_irq_resume(struct irq_data *d)
 {
 	int idx = d->hwirq >> 5;
 
-	__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
-		     tzic_base + TZIC_WAKEUP0(idx));
+	imx_writel(imx_readl(tzic_base + TZIC_ENSET0(idx)),
+		   tzic_base + TZIC_WAKEUP0(idx));
 }
 
 #else
@@ -135,8 +134,8 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
 		handled = 0;
 
 		for (i = 0; i < 4; i++) {
-			stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
-				__raw_readl(tzic_base + TZIC_INTSEC0(i));
+			stat = imx_readl(tzic_base + TZIC_HIPND(i)) &
+				imx_readl(tzic_base + TZIC_INTSEC0(i));
 
 			while (stat) {
 				handled = 1;
@@ -153,31 +152,29 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init tzic_init_irq(void)
+static int __init tzic_init_dt(struct device_node *np, struct device_node *p)
 {
-	struct device_node *np;
 	int irq_base;
 	int i;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
 	tzic_base = of_iomap(np, 0);
 	WARN_ON(!tzic_base);
 
 	/* put the TZIC into the reset value with
 	 * all interrupts disabled
 	 */
-	i = __raw_readl(tzic_base + TZIC_INTCNTL);
+	i = imx_readl(tzic_base + TZIC_INTCNTL);
 
-	__raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
-	__raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
-	__raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
+	imx_writel(0x80010001, tzic_base + TZIC_INTCNTL);
+	imx_writel(0x1f, tzic_base + TZIC_PRIOMASK);
+	imx_writel(0x02, tzic_base + TZIC_SYNCCTRL);
 
 	for (i = 0; i < 4; i++)
-		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
+		imx_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
 
 	/* disable all interrupts */
 	for (i = 0; i < 4; i++)
-		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
+		imx_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
 
 	/* all IRQ no FIQ Warning :: No selection */
 
@@ -199,7 +196,10 @@ void __init tzic_init_irq(void)
 #endif
 
 	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+
+	return 0;
 }
+IRQCHIP_DECLARE(tzic, "fsl,tzic", tzic_init_dt);
 
 /**
  * tzic_enable_wake() - enable wakeup interrupt
@@ -214,13 +214,13 @@ int tzic_enable_wake(void)
 {
 	unsigned int i;
 
-	__raw_writel(1, tzic_base + TZIC_DSMINT);
-	if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
+	imx_writel(1, tzic_base + TZIC_DSMINT);
+	if (unlikely(imx_readl(tzic_base + TZIC_DSMINT) == 0))
 		return -EAGAIN;
 
 	for (i = 0; i < 4; i++)
-		__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)),
-			     tzic_base + TZIC_WAKEUP0(i));
+		imx_writel(imx_readl(tzic_base + TZIC_ENSET0(i)),
+			   tzic_base + TZIC_WAKEUP0(i));
 
 	return 0;
 }
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 02d083489..599f973e1 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -1,33 +1,26 @@
-config ARCH_INTEGRATOR
-	bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+menuconfig ARCH_INTEGRATOR
+	bool "ARM Ltd. Integrator family"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
 	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select AUTO_ZRELADDR
-	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM
 	select ICST
 	select MFD_SYSCON
-	select MULTI_IRQ_HANDLER
 	select PLAT_VERSATILE
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
 	select POWER_SUPPLY
 	select SOC_INTEGRATOR_CM
 	select SPARSE_IRQ
-	select USE_OF
 	select VERSATILE_FPGA_IRQ
 	help
 	  Support for ARM's Integrator platform.
 
 if ARCH_INTEGRATOR
 
-menu "Integrator Options"
-
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
-	select CLKSRC_MMIO
+	select INTEGRATOR_AP_TIMER
 	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010 if TTY
 	select SERIAL_AMBA_PL010_CONSOLE if TTY
@@ -36,25 +29,12 @@ config ARCH_INTEGRATOR_AP
 	  Include support for the ARM(R) Integrator/AP and
 	  Integrator/PP2 platforms.
 
-config ARCH_INTEGRATOR_CP
-	bool "Support Integrator/CP platform"
-	select ARCH_CINTEGRATOR
-	select ARM_TIMER_SP804
-	select SERIAL_AMBA_PL011 if TTY
-	select SERIAL_AMBA_PL011_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator CP platform.
-
-config ARCH_CINTEGRATOR
-	bool
-
 config INTEGRATOR_IMPD1
 	bool "Include support for Integrator/IM-PD1"
 	depends on ARCH_INTEGRATOR_AP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
-	select GPIO_PL061 if GPIOLIB
+	select GPIO_PL061
+	select GPIOLIB
 	help
 	  The IM-PD1 is an add-on logic module for the Integrator which
 	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
@@ -63,6 +43,119 @@ config INTEGRATOR_IMPD1
 	  To compile this driver as a module, choose M here: the
 	  module will be called impd1.
 
-endmenu
+config INTEGRATOR_CM7TDMI
+	bool "Integrator/CM7TDMI core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4 && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CM720T
+	bool "Integrator/CM720T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM720T
+
+config INTEGRATOR_CM740T
+	bool "Integrator/CM740T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM740T
+
+config INTEGRATOR_CM920T
+	bool "Integrator/CM920T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+
+config INTEGRATOR_CM922T_XA10
+	bool "Integrator/CM922T-XA10 core module"
+	depends on ARCH_MULTI_V4T
+	depends on ARCH_INTEGRATOR_AP
+	select CPU_ARM922T
+
+config INTEGRATOR_CM926EJS
+	bool "Integrator/CM926EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CM940T
+	bool "Integrator/CM940T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM940T
+
+config INTEGRATOR_CM946ES
+	bool "Integrator/CM946E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5 && !MMU
+	select CPU_ARM946E
+
+config INTEGRATOR_CM966ES
+	bool "Integrator/CM966E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on BROKEN # no kernel support
+
+config INTEGRATOR_CM10200E_REV0
+	bool "Integrator/CM10200E rev.0 core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020
+
+config INTEGRATOR_CM10200E
+	bool "Integrator/CM10200E core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020E
+
+config INTEGRATOR_CM10220E
+	bool "Integrator/CM10220E core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1022
+
+config INTEGRATOR_CM1026EJS
+	bool "Integrator/CM1026EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1026
+
+config INTEGRATOR_CM1136JFS
+	bool "Integrator/CM1136JF-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_INTEGRATOR_CP
+	bool "Support Integrator/CP platform"
+	depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+	select ARM_TIMER_SP804
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator CP platform.
+
+config INTEGRATOR_CT7T
+	bool "Integrator/CT7TD (ARM7TDMI) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CT926
+	bool "Integrator/CT926 (ARM926EJ-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CTB36
+	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_CINTEGRATOR
+	depends on ARCH_INTEGRATOR_CP
+	def_bool y
 
 endif
diff --git a/arch/arm/mach-integrator/Makefile.boot b/arch/arm/mach-integrator/Makefile.boot
deleted file mode 100644
index ff0a4b5b0..000000000
--- a/arch/arm/mach-integrator/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 38b0da300..ed9a01484 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -320,11 +320,11 @@ static struct impd1_device impd1_devs[] = {
 #define IMPD1_VALID_IRQS 0x00000bffU
 
 /*
- * As this module is bool, it is OK to have this as __init_refok() - no
+ * As this module is bool, it is OK to have this as __ref() - no
  * probe calls will be done after the initial system bootup, as devices
  * are discovered as part of the machine startup.
  */
-static int __init_refok impd1_probe(struct lm_device *dev)
+static int __ref impd1_probe(struct lm_device *dev)
 {
 	struct impd1_module *impd1;
 	int irq_base;
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 5b0e363fe..c7bb83205 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -29,7 +29,6 @@
 #include <linux/amba/kmi.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_data/clk-integrator.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
@@ -147,65 +146,6 @@ static int __init irq_syscore_init(void)
 device_initcall(irq_syscore_init);
 
 /*
- * Flash handling.
- */
-static int ap_flash_init(struct platform_device *dev)
-{
-	u32 tmp;
-
-	writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP,
-	       ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
-
-	tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) |
-		INTEGRATOR_EBI_WRITE_ENABLE;
-	writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
-
-	if (!(readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET)
-	      & INTEGRATOR_EBI_WRITE_ENABLE)) {
-		writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
-		writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
-		writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
-	}
-	return 0;
-}
-
-static void ap_flash_exit(struct platform_device *dev)
-{
-	u32 tmp;
-
-	writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP,
-	       ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
-
-	tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) &
-		~INTEGRATOR_EBI_WRITE_ENABLE;
-	writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
-
-	if (readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) &
-	    INTEGRATOR_EBI_WRITE_ENABLE) {
-		writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
-		writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
-		writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
-	}
-}
-
-static void ap_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	if (on)
-		writel(INTEGRATOR_SC_CTRL_nFLVPPEN,
-		       ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET);
-	else
-		writel(INTEGRATOR_SC_CTRL_nFLVPPEN,
-		       ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
-}
-
-static struct physmap_flash_data ap_flash_data = {
-	.width		= 4,
-	.init		= ap_flash_init,
-	.exit		= ap_flash_exit,
-	.set_vpp	= ap_flash_set_vpp,
-};
-
-/*
  * For the PL010 found in the Integrator/AP some of the UART control is
  * implemented in the system controller and accessed using a callback
  * from the driver.
@@ -266,8 +206,6 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
 		"kmi0", NULL),
 	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
 		"kmi1", NULL),
-	OF_DEV_AUXDATA("cfi-flash", INTEGRATOR_FLASH_BASE,
-		"physmap-flash", &ap_flash_data),
 	{ /* sentinel */ },
 };
 
@@ -302,8 +240,7 @@ static void __init ap_init_of(void)
 	if (!ebi_base)
 		return;
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			ap_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, ap_auxdata_lookup, NULL);
 
 	sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
 	for (i = 0; i < 4; i++) {
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index b5fb71a36..825298349 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -23,7 +23,6 @@
 #include <linux/io.h>
 #include <linux/irqchip.h>
 #include <linux/gfp.h>
-#include <linux/mtd/physmap.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
@@ -43,14 +42,8 @@
 /* Base address to the CP controller */
 static void __iomem *intcp_con_base;
 
-#define INTCP_PA_FLASH_BASE		0x24000000
-
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_FLASHPROG			0x04
-#define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
-#define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
-
 /*
  * Logical      Physical
  * f1000000	10000000	Core module registers
@@ -108,48 +101,6 @@ static void __init intcp_map_io(void)
 }
 
 /*
- * Flash handling.
- */
-static int intcp_flash_init(struct platform_device *dev)
-{
-	u32 val;
-
-	val = readl(intcp_con_base + INTCP_FLASHPROG);
-	val |= CINTEGRATOR_FLASHPROG_FLWREN;
-	writel(val, intcp_con_base + INTCP_FLASHPROG);
-
-	return 0;
-}
-
-static void intcp_flash_exit(struct platform_device *dev)
-{
-	u32 val;
-
-	val = readl(intcp_con_base + INTCP_FLASHPROG);
-	val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN);
-	writel(val, intcp_con_base + INTCP_FLASHPROG);
-}
-
-static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = readl(intcp_con_base + INTCP_FLASHPROG);
-	if (on)
-		val |= CINTEGRATOR_FLASHPROG_FLVPPEN;
-	else
-		val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN;
-	writel(val, intcp_con_base + INTCP_FLASHPROG);
-}
-
-static struct physmap_flash_data intcp_flash_data = {
-	.width		= 4,
-	.init		= intcp_flash_init,
-	.exit		= intcp_flash_exit,
-	.set_vpp	= intcp_flash_set_vpp,
-};
-
-/*
  * It seems that the card insertion interrupt remains active after
  * we've acknowledged it.  We therefore ignore the interrupt, and
  * rely on reading it from the SIC.  This also means that we must
@@ -260,8 +211,6 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
 		"aaci", &mmc_data),
 	OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
 		"clcd", &clcd_data),
-	OF_DEV_AUXDATA("cfi-flash", INTCP_PA_FLASH_BASE,
-		"physmap-flash", &intcp_flash_data),
 	{ /* sentinel */ },
 };
 
@@ -282,8 +231,7 @@ static void __init intcp_init_of(void)
 	if (!intcp_con_base)
 		return;
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     intcp_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, intcp_auxdata_lookup, NULL);
 }
 
 static const char * intcp_dt_board_compat[] = {
diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
deleted file mode 100644
index 59f42b535..000000000
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _IOP13XX_PCI_H_
-#define _IOP13XX_PCI_H_
-#include <linux/io.h>
-#include <mach/irqs.h>
-
-struct pci_sys_data;
-struct hw_pci;
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
-void iop13xx_atu_select(struct hw_pci *plat_pci);
-void iop13xx_pci_init(void);
-void iop13xx_map_pci_memory(void);
-
-#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
-			       PCI_STATUS_SIG_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_MASTER_ABORT | \
-			       PCI_STATUS_SIG_SYSTEM_ERROR | \
-	 		       PCI_STATUS_DETECTED_PARITY)
-
-#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
-				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
-				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
-				    IOP13XX_ATUE_STAT_ERR_COR |	       \
-				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
-				    IOP13XX_ATUE_STAT_CRS |	       \
-				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
-				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
-
-#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
-				    IOP13XX_ATUX_STAT_REC_SCEM |       \
-				    IOP13XX_ATUX_STAT_TX_SERR |	       \
-				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_REC_SERR |       \
-				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
-				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
-
-/* PCI interrupts
- */
-#define ATUX_INTA IRQ_IOP13XX_XINT0
-#define ATUX_INTB IRQ_IOP13XX_XINT1
-#define ATUX_INTC IRQ_IOP13XX_XINT2
-#define ATUX_INTD IRQ_IOP13XX_XINT3
-
-#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
-#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
-#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
-#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
-
-#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d396..d255ab5ad 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -23,7 +23,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pci.h>
+#include "pci.h"
 #include <asm/mach/time.h>
 #include <mach/time.h>
 
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11cb7..33eeaf1fa 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -23,7 +23,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pci.h>
+#include "pci.h"
 #include <asm/mach/time.h>
 #include <mach/time.h>
 
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index bc739701c..c702cc409 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -25,7 +25,7 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/msi.h>
+#include "msi.h"
 
 /* INTCTL0 CP6 R0 Page 4
  */
@@ -233,7 +233,7 @@ void __init iop13xx_init_irq(void)
 			irq_set_chip(i, &iop13xx_irqchip4);
 
 		irq_set_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	iop13xx_msi_init();
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index 9f89e76df..f6235b285 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -91,7 +91,7 @@ static void (*write_imipr[])(u32) = {
 	write_imipr_3,
 };
 
-static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc)
+static void iop13xx_msi_handler(struct irq_desc *desc)
 {
 	int i, j;
 	unsigned long status;
diff --git a/arch/arm/mach-iop13xx/include/mach/msi.h b/arch/arm/mach-iop13xx/msi.h
index b80c5ae17..b80c5ae17 100644
--- a/arch/arm/mach-iop13xx/include/mach/msi.h
+++ b/arch/arm/mach-iop13xx/msi.h
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84ae..204eb4460 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -27,7 +27,7 @@
 #include <asm/sizes.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <mach/pci.h>
+#include "pci.h"
 
 #define IOP13XX_PCI_DEBUG 0
 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
diff --git a/arch/arm/mach-iop13xx/pci.h b/arch/arm/mach-iop13xx/pci.h
index d45a80b30..71b9c57e1 100644
--- a/arch/arm/mach-iop13xx/pci.h
+++ b/arch/arm/mach-iop13xx/pci.h
@@ -1,6 +1,64 @@
+#ifndef _IOP13XX_PCI_H_
+#define _IOP13XX_PCI_H_
+#include <linux/io.h>
+#include <mach/irqs.h>
+
 #include <linux/types.h>
 
 extern void __iomem *iop13xx_atue_mem_base;
 extern void __iomem *iop13xx_atux_mem_base;
 extern size_t iop13xx_atue_mem_size;
 extern size_t iop13xx_atux_mem_size;
+
+struct pci_sys_data;
+struct hw_pci;
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+void iop13xx_atu_select(struct hw_pci *plat_pci);
+void iop13xx_pci_init(void);
+void iop13xx_map_pci_memory(void);
+
+#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
+			       PCI_STATUS_SIG_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_MASTER_ABORT | \
+			       PCI_STATUS_SIG_SYSTEM_ERROR | \
+	 		       PCI_STATUS_DETECTED_PARITY)
+
+#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
+				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
+				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
+				    IOP13XX_ATUE_STAT_ERR_COR |	       \
+				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
+				    IOP13XX_ATUE_STAT_CRS |	       \
+				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
+				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
+
+#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
+				    IOP13XX_ATUX_STAT_REC_SCEM |       \
+				    IOP13XX_ATUX_STAT_TX_SERR |	       \
+				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_REC_SERR |       \
+				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
+				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
+
+/* PCI interrupts
+ */
+#define ATUX_INTA IRQ_IOP13XX_XINT0
+#define ATUX_INTB IRQ_IOP13XX_XINT1
+#define ATUX_INTC IRQ_IOP13XX_XINT2
+#define ATUX_INTD IRQ_IOP13XX_XINT3
+
+#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
+#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
+#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
+#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
+
+#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index d7ee2789d..2d1f69a68 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -69,6 +69,6 @@ void __init iop32x_init_irq(void)
 
 	for (i = 0; i < NR_IRQS; i++) {
 		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 }
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index f7f5d3e45..c99ec8d0d 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -113,6 +113,6 @@ void __init iop33x_init_irq(void)
 		irq_set_chip_and_handler(i,
 					 (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2,
 					 handle_level_irq);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 }
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 8537d4c41..26874f608 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -27,7 +27,7 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/export.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/sched_clock.h>
@@ -296,7 +296,7 @@ void __init ixp4xx_init_irq(void)
 	for(i = 0; i < NR_IRQS; i++) {
 		irq_set_chip_and_handler(i, &ixp4xx_irq_chip,
 					 handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
+		irq_clear_status_flags(i, IRQ_NOREQUEST);
 	}
 }
 
@@ -461,7 +461,7 @@ void __init ixp4xx_sys_init(void)
 
 	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
 
-	gpiochip_add(&ixp4xx_gpio_chip);
+	gpiochip_add_data(&ixp4xx_gpio_chip, NULL);
 
 	if (cpu_is_ixp46x()) {
 		int region;
@@ -521,43 +521,55 @@ static int ixp4xx_set_next_event(unsigned long evt,
 	return 0;
 }
 
-static void ixp4xx_set_mode(enum clock_event_mode mode,
-			    struct clock_event_device *evt)
+static int ixp4xx_shutdown(struct clock_event_device *evt)
 {
 	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
 	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
- 		opts = IXP4XX_OST_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set by 'set next_event' */
-		osrt = 0;
-		opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		opts &= ~IXP4XX_OST_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		opts |= IXP4XX_OST_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	default:
-		osrt = opts = 0;
-		break;
-	}
+	opts &= ~IXP4XX_OST_ENABLE;
+	*IXP4XX_OSRT1 = osrt | opts;
+	return 0;
+}
 
+static int ixp4xx_set_oneshot(struct clock_event_device *evt)
+{
+	unsigned long opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
+	unsigned long osrt = 0;
+
+	/* period set by 'set next_event' */
 	*IXP4XX_OSRT1 = osrt | opts;
+	return 0;
+}
+
+static int ixp4xx_set_periodic(struct clock_event_device *evt)
+{
+	unsigned long opts = IXP4XX_OST_ENABLE;
+	unsigned long osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
+
+	*IXP4XX_OSRT1 = osrt | opts;
+	return 0;
+}
+
+static int ixp4xx_resume(struct clock_event_device *evt)
+{
+	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
+	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
+
+	opts |= IXP4XX_OST_ENABLE;
+	*IXP4XX_OSRT1 = osrt | opts;
+	return 0;
 }
 
 static struct clock_event_device clockevent_ixp4xx = {
-	.name		= "ixp4xx timer1",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 200,
-	.set_mode	= ixp4xx_set_mode,
-	.set_next_event	= ixp4xx_set_next_event,
+	.name			= "ixp4xx timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_state_shutdown	= ixp4xx_shutdown,
+	.set_state_periodic	= ixp4xx_set_periodic,
+	.set_state_oneshot	= ixp4xx_set_oneshot,
+	.tick_resume		= ixp4xx_resume,
+	.set_next_event		= ixp4xx_set_next_event,
 };
 
 static void __init ixp4xx_clockevent_init(void)
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index b02439019..7a0c13bf4 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -143,7 +143,7 @@ static inline void __indirect_writesl(volatile void __iomem *bus_addr,
 		writel(*vaddr++, bus_addr);
 }
 
-static inline unsigned char __indirect_readb(const volatile void __iomem *p)
+static inline u8 __indirect_readb(const volatile void __iomem *p)
 {
 	u32 addr = (u32)p;
 	u32 n, byte_enables, data;
@@ -166,7 +166,7 @@ static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
 		*vaddr++ = readb(bus_addr);
 }
 
-static inline unsigned short __indirect_readw(const volatile void __iomem *p)
+static inline u16 __indirect_readw(const volatile void __iomem *p)
 {
 	u32 addr = (u32)p;
 	u32 n, byte_enables, data;
@@ -189,7 +189,7 @@ static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
 		*vaddr++ = readw(bus_addr);
 }
 
-static inline unsigned long __indirect_readl(const volatile void __iomem *p)
+static inline u32 __indirect_readl(const volatile void __iomem *p)
 {
 	u32 addr = (__force u32)p;
 	u32 data;
@@ -350,7 +350,7 @@ static inline void insl(u32 io_addr, void *p, u32 count)
 					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
 
 #define	ioread8(p)			ioread8(p)
-static inline unsigned int ioread8(const void __iomem *addr)
+static inline u8 ioread8(const void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
@@ -378,7 +378,7 @@ static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
 }
 
 #define	ioread16(p)			ioread16(p)
-static inline unsigned int ioread16(const void __iomem *addr)
+static inline u16 ioread16(const void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
@@ -407,7 +407,7 @@ static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
 }
 
 #define	ioread32(p)			ioread32(p)
-static inline unsigned int ioread32(const void __iomem *addr)
+static inline u32 ioread32(const void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index c5bae9c03..b7ddd2741 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -395,204 +395,6 @@
 #define CRP_AD_CBE_BESL         20
 #define CRP_AD_CBE_WRITE	0x00010000
 
-
-/*
- * USB Device Controller
- *
- * These are used by the USB gadget driver, so they don't follow the
- * IXP4XX_ naming convetions.
- *
- */
-# define IXP4XX_USB_REG(x)       (*((volatile u32 *)(x)))
-
-/* UDC Undocumented - Reserved1 */
-#define UDC_RES1	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)  
-/* UDC Undocumented - Reserved2 */
-#define UDC_RES2	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)  
-/* UDC Undocumented - Reserved3 */
-#define UDC_RES3	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)  
-/* UDC Control Register */
-#define UDCCR		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)  
-/* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)  
-/* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)  
-/* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)  
-/* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)  
-/* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)  
-/* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)  
-/* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)  
-/* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)  
-/* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)  
-/* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)  
-/* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)  
-/* UDC Endpoint 11 (IN) Control/Status Register */
-#define UDCCS11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)  
-/* UDC Endpoint 12 (OUT) Control/Status Register */
-#define UDCCS12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)  
-/* UDC Endpoint 13 (IN) Control/Status Register */
-#define UDCCS13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)  
-/* UDC Endpoint 14 (OUT) Control/Status Register */
-#define UDCCS14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)  
-/* UDC Endpoint 15 (Interrupt) Control/Status Register */
-#define UDCCS15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)  
-/* UDC Frame Number Register High */
-#define UFNRH		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)  
-/* UDC Frame Number Register Low */
-#define UFNRL		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)  
-/* UDC Byte Count Reg 2 */
-#define UBCR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)  
-/* UDC Byte Count Reg 4 */
-#define UBCR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)  
-/* UDC Byte Count Reg 7 */
-#define UBCR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)  
-/* UDC Byte Count Reg 9 */
-#define UBCR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)  
-/* UDC Byte Count Reg 12 */
-#define UBCR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)  
-/* UDC Byte Count Reg 14 */
-#define UBCR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)  
-/* UDC Endpoint 0 Data Register */
-#define UDDR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)  
-/* UDC Endpoint 1 Data Register */
-#define UDDR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)  
-/* UDC Endpoint 2 Data Register */
-#define UDDR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)  
-/* UDC Endpoint 3 Data Register */
-#define UDDR3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)  
-/* UDC Endpoint 4 Data Register */
-#define UDDR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)  
-/* UDC Endpoint 5 Data Register */
-#define UDDR5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)  
-/* UDC Endpoint 6 Data Register */
-#define UDDR6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)  
-/* UDC Endpoint 7 Data Register */
-#define UDDR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)  
-/* UDC Endpoint 8 Data Register */
-#define UDDR8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)  
-/* UDC Endpoint 9 Data Register */
-#define UDDR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)  
-/* UDC Endpoint 10 Data Register */
-#define UDDR10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)  
-/* UDC Endpoint 11 Data Register */
-#define UDDR11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)  
-/* UDC Endpoint 12 Data Register */
-#define UDDR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)  
-/* UDC Endpoint 13 Data Register */
-#define UDDR13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)  
-/* UDC Endpoint 14 Data Register */
-#define UDDR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)  
-/* UDC Endpoint 15 Data Register */
-#define UDDR15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)  
-/* UDC Interrupt Control Register 0 */
-#define UICR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)  
-/* UDC Interrupt Control Register 1 */
-#define UICR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)  
-/* UDC Status Interrupt Register 0 */
-#define USIR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)  
-/* UDC Status Interrupt Register 1 */
-#define USIR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)  
-
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
 
 /* "fuse" bits of IXP_EXP_CFG2 */
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index e7b8befa8..508c2d778 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -76,8 +76,8 @@ static struct mtd_partition ixdp425_partitions[] = {
 static void
 ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
-	int offset = (int)this->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
+	int offset = (int)nand_get_controller_data(this);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if (ctrl & NAND_NCE) {
@@ -88,7 +88,7 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 		offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
 		offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
-		this->priv = (void *)offset;
+		nand_set_controller_data(this, (void *)offset);
 	}
 
 	if (cmd != NAND_CMD_NONE)
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index ea955f6db..8ff61be1a 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -1,16 +1,16 @@
 config ARCH_KEYSTONE
 	bool "Texas Instruments Keystone Devices"
 	depends on ARCH_MULTI_V7
-	depends on ARM_PATCH_PHYS_VIRT
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select CLKSRC_MMIO
+	select KEYSTONE_TIMER
 	select ARM_ERRATA_798181 if SMP
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
+	select PINCTRL
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
 	  SoCs.
diff --git a/arch/arm/mach-keystone/Makefile.boot b/arch/arm/mach-keystone/Makefile.boot
deleted file mode 100644
index f3835c43a..000000000
--- a/arch/arm/mach-keystone/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y	:= 0x80008000
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index e28801052..84613abf3 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -60,12 +60,6 @@ static void __init keystone_init(void)
 		bus_register_notifier(&platform_bus_type, &platform_nb);
 	}
 	keystone_pm_runtime_init();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static phys_addr_t keystone_virt_to_idmap(unsigned long x)
-{
-	return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START;
 }
 
 static long long __init keystone_pv_fixup(void)
@@ -91,12 +85,16 @@ static long long __init keystone_pv_fixup(void)
 	offset = KEYSTONE_HIGH_PHYS_START - KEYSTONE_LOW_PHYS_START;
 
 	/* Populate the arch idmap hook */
-	arch_virt_to_idmap = keystone_virt_to_idmap;
+	arch_phys_to_idmap_offset = -offset;
 
 	return offset;
 }
 
 static const char *const keystone_match[] __initconst = {
+	"ti,k2hk",
+	"ti,k2e",
+	"ti,k2l",
+	"ti,k2g",
 	"ti,keystone",
 	NULL,
 };
diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h
index cd04a1c14..33eaa037a 100644
--- a/arch/arm/mach-keystone/keystone.h
+++ b/arch/arm/mach-keystone/keystone.h
@@ -15,7 +15,7 @@
 
 #ifndef __ASSEMBLER__
 
-extern struct smp_operations keystone_smp_ops;
+extern const struct smp_operations keystone_smp_ops;
 extern void secondary_startup(void);
 extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr);
 extern int keystone_pm_runtime_init(void);
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
index 4bbb18463..566527697 100644
--- a/arch/arm/mach-keystone/platsmp.c
+++ b/arch/arm/mach-keystone/platsmp.c
@@ -39,6 +39,6 @@ static int keystone_smp_boot_secondary(unsigned int cpu,
 	return error;
 }
 
-struct smp_operations keystone_smp_ops __initdata = {
+const struct smp_operations keystone_smp_ops __initconst = {
 	.smp_boot_secondary	= keystone_smp_boot_secondary,
 };
diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c
index edea697e8..8cbb35765 100644
--- a/arch/arm/mach-keystone/pm_domain.c
+++ b/arch/arm/mach-keystone/pm_domain.c
@@ -16,9 +16,10 @@
 #include <linux/pm_runtime.h>
 #include <linux/pm_clock.h>
 #include <linux/platform_device.h>
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 
+#include "keystone.h"
+
 static struct dev_pm_domain keystone_pm_domain = {
 	.ops = {
 		USE_PM_CLK_RUNTIME_OPS
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 9f9c0441a..e4d709c8e 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/devices.h>
+#include "devices.h"
 #include <mach/gpio-ks8695.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index d37c218c3..13537e9c5 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -28,7 +28,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/devices.h>
+#include "devices.h"
 #include <mach/gpio-ks8695.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 3acbdfd31..69cfb9935 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -19,7 +19,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/gpio-ks8695.h>
-#include <mach/devices.h>
+#include "devices.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
index f2658168e..478ebd1f2 100644
--- a/arch/arm/mach-ks8695/board-og.c
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/devices.h>
+#include "devices.h"
 #include <mach/regs-gpio.h>
 #include <mach/gpio-ks8695.h>
 #include "generic.h"
@@ -80,7 +80,7 @@ static void __init og_pci_bus_reset(void)
 #define	S8250_VIRT	0xf4000000
 #define	S8250_SIZE	0x00100000
 
-static struct __initdata map_desc og_io_desc[] = {
+static struct map_desc og_io_desc[] __initdata = {
 	{
 		.virtual	= S8250_VIRT,
 		.pfn		= __phys_to_pfn(S8250_PHYS),
diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c
index fdf2352d2..46e455c38 100644
--- a/arch/arm/mach-ks8695/board-sg.c
+++ b/arch/arm/mach-ks8695/board-sg.c
@@ -16,7 +16,7 @@
 #include <linux/mtd/partitions.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/devices.h>
+#include "devices.h"
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index ddb242229..7a1c4caa1 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -30,11 +30,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/regs-sys.h>
+#include "regs-sys.h"
 #include <mach/regs-misc.h>
 
 
-static struct __initdata map_desc ks8695_io_desc[] = {
+static struct map_desc ks8695_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long)KS8695_IO_VA,
 		.pfn		= __phys_to_pfn(KS8695_IO_PA),
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 47399bc3c..61cf20beb 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -24,9 +24,9 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/regs-wan.h>
-#include <mach/regs-lan.h>
-#include <mach/regs-hpna.h>
+#include "regs-wan.h"
+#include "regs-lan.h"
+#include "regs-hpna.h"
 #include <mach/regs-switch.h>
 #include <mach/regs-misc.h>
 
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/devices.h
index 1e6594a0f..1e6594a0f 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/devices.h
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
index c089a1aea..a001c7c34 100644
--- a/arch/arm/mach-ks8695/include/mach/uncompress.h
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <mach/regs-uart.h>
 
-static void putc(char c)
+static inline void putc(char c)
 {
 	while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
 		barrier();
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 76802aac0..31439f2ee 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -172,6 +172,6 @@ void __init ks8695_init_irq(void)
 							 handle_edge_irq);
 		}
 
-		set_irq_flags(irq, IRQF_VALID);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST);
 	}
 }
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index c1bc4c371..577a35f75 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -33,8 +33,8 @@
 #include <asm/mach/pci.h>
 #include <mach/hardware.h>
 
-#include <mach/devices.h>
-#include <mach/regs-pci.h>
+#include "devices.h"
+#include "regs-pci.h"
 
 
 static int pci_dbg;
diff --git a/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/arch/arm/mach-ks8695/regs-hpna.h
index 815ce5c2e..815ce5c2e 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-hpna.h
+++ b/arch/arm/mach-ks8695/regs-hpna.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/regs-lan.h
index 82c5f3791..82c5f3791 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-lan.h
+++ b/arch/arm/mach-ks8695/regs-lan.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/regs-mem.h
index 55806bc68..55806bc68 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-mem.h
+++ b/arch/arm/mach-ks8695/regs-mem.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-pci.h b/arch/arm/mach-ks8695/regs-pci.h
index 75a9db6ed..75a9db6ed 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-pci.h
+++ b/arch/arm/mach-ks8695/regs-pci.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-sys.h b/arch/arm/mach-ks8695/regs-sys.h
index 57c20be0c..57c20be0c 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-sys.h
+++ b/arch/arm/mach-ks8695/regs-sys.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/regs-wan.h
index c475bed22..c475bed22 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-wan.h
+++ b/arch/arm/mach-ks8695/regs-wan.h
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index a197874bf..18eb0fbd8 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -54,28 +54,25 @@
 /* Timer0 Timeout Counter Register */
 #define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
 
-static void ks8695_set_mode(enum clock_event_mode mode,
-			    struct clock_event_device *evt)
+static int ks8695_set_periodic(struct clock_event_device *evt)
 {
+	u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
+	u32 half = DIV_ROUND_CLOSEST(rate, 2);
 	u32 tmcon;
 
-	if (mode == CLOCK_EVT_FEAT_PERIODIC) {
-		u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
-		u32 half = DIV_ROUND_CLOSEST(rate, 2);
-
-		/* Disable timer 1 */
-		tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
-		tmcon &= ~TMCON_T1EN;
-		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+	/* Disable timer 1 */
+	tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+	tmcon &= ~TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
 
-		/* Both registers need to count down */
-		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
-		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
+	/* Both registers need to count down */
+	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
 
-		/* Re-enable timer1 */
-		tmcon |= TMCON_T1EN;
-		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
-	}
+	/* Re-enable timer1 */
+	tmcon |= TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+	return 0;
 }
 
 static int ks8695_set_next_event(unsigned long cycles,
@@ -102,11 +99,13 @@ static int ks8695_set_next_event(unsigned long cycles,
 }
 
 static struct clock_event_device clockevent_ks8695 = {
-	.name		= "ks8695_t1tc",
-	.rating		= 300, /* Reasonably fast and accurate clock event */
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.set_next_event	= ks8695_set_next_event,
-	.set_mode	= ks8695_set_mode,
+	.name			= "ks8695_t1tc",
+	/* Reasonably fast and accurate clock event */
+	.rating			= 300,
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event		= ks8695_set_next_event,
+	.set_state_periodic	= ks8695_set_periodic,
 };
 
 /*
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
index f5db805ab..79b6b07e1 100644
--- a/arch/arm/mach-lpc32xx/Makefile
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -2,7 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-y	:= timer.o irq.o common.o serial.o clock.o
+obj-y	:= common.o serial.o
 obj-y	+= pm.o suspend.o
 obj-y	+= phy3250.o
-
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
deleted file mode 100644
index 661c8f4b2..000000000
--- a/arch/arm/mach-lpc32xx/clock.c
+++ /dev/null
@@ -1,1284 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/clock.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * LPC32xx clock management driver overview
- *
- * The LPC32XX contains a number of high level system clocks that can be
- * generated from different sources. These system clocks are used to
- * generate the CPU and bus rates and the individual peripheral clocks in
- * the system. When Linux is started by the boot loader, the system
- * clocks are already running. Stopping a system clock during normal
- * Linux operation should never be attempted, as peripherals that require
- * those clocks will quit working (ie, DRAM).
- *
- * The LPC32xx high level clock tree looks as follows. Clocks marked with
- * an asterisk are always on and cannot be disabled. Clocks marked with
- * an ampersand can only be disabled in CPU suspend mode. Clocks marked
- * with a caret are always on if it is the selected clock for the SYSCLK
- * source. The clock that isn't used for SYSCLK can be enabled and
- * disabled normally.
- *                               32KHz oscillator*
- *                               /      |      \
- *                             RTC*   PLL397^ TOUCH
- *                                     /
- *               Main oscillator^     /
- *                   |        \      /
- *                   |         SYSCLK&
- *                   |            \
- *                   |             \
- *                USB_PLL       HCLK_PLL&
- *                   |           |    |
- *            USB host/device  PCLK&  |
- *                               |    |
- *                             Peripherals
- *
- * The CPU and chip bus rates are derived from the HCLK PLL, which can
- * generate various clock rates up to 266MHz and beyond. The internal bus
- * rates (PCLK and HCLK) are generated from dividers based on the HCLK
- * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
- * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
- * level clocks are based on either HCLK or PCLK, but have their own
- * dividers as part of the IP itself. Because of this, the system clock
- * rates should not be changed.
- *
- * The HCLK PLL is clocked from SYSCLK, which can be derived from the
- * main oscillator or PLL397. PLL397 generates a rate that is 397 times
- * the 32KHz oscillator rate. The main oscillator runs at the selected
- * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
- * is normally 13MHz, but depends on the selection of external crystals
- * or oscillators. If USB operation is required, the main oscillator must
- * be used in the system.
- *
- * Switching SYSCLK between sources during normal Linux operation is not
- * supported. SYSCLK is preset in the bootloader. Because of the
- * complexities of clock management during clock frequency changes,
- * there are some limitations to the clock driver explained below:
- * - The PLL397 and main oscillator can be enabled and disabled by the
- *   clk_enable() and clk_disable() functions unless SYSCLK is based
- *   on that clock. This allows the other oscillator that isn't driving
- *   the HCLK PLL to be used as another system clock that can be routed
- *   to an external pin.
- * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
- *   this driver.
- * - HCLK and PCLK rates cannot be changed as part of this driver.
- * - Most peripherals have their own dividers are part of the peripheral
- *   block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
- *   will also impact the individual peripheral rates.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "clock.h"
-#include "common.h"
-
-static DEFINE_SPINLOCK(global_clkregs_lock);
-
-static int usb_pll_enable, usb_pll_valid;
-
-static struct clk clk_armpll;
-static struct clk clk_usbpll;
-
-/*
- * Post divider values for PLLs based on selected register value
- */
-static const u32 pll_postdivs[4] = {1, 2, 4, 8};
-
-static unsigned long local_return_parent_rate(struct clk *clk)
-{
-	/*
-	 * If a clock has a rate of 0, then it inherits it's parent
-	 * clock rate
-	 */
-	while (clk->rate == 0)
-		clk = clk->parent;
-
-	return clk->rate;
-}
-
-/* 32KHz clock has a fixed rate and is not stoppable */
-static struct clk osc_32KHz = {
-	.rate		= LPC32XX_CLOCK_OSC_FREQ,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_pll397_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
-
-	if (enable == 0) {
-		reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
-		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-	} else {
-		/* Enable PLL397 */
-		reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
-		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-
-		/* Wait for PLL397 lock */
-		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
-			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
-			time_before(jiffies, timeout))
-			cpu_relax();
-
-		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
-			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int local_oscmain_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
-	if (enable == 0) {
-		reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
-		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-	} else {
-		/* Enable main oscillator */
-		reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
-		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
-		/* Wait for main oscillator to start */
-		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
-			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
-			time_before(jiffies, timeout))
-			cpu_relax();
-
-		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
-			LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static struct clk osc_pll397 = {
-	.parent		= &osc_32KHz,
-	.enable		= local_pll397_enable,
-	.rate		= LPC32XX_CLOCK_OSC_FREQ * 397,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk osc_main = {
-	.enable		= local_oscmain_enable,
-	.rate		= LPC32XX_MAIN_OSC_FREQ,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_sys;
-
-/*
- * Convert a PLL register value to a PLL output frequency
- */
-u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
-{
-	struct clk_pll_setup pllcfg;
-
-	pllcfg.cco_bypass_b15 = 0;
-	pllcfg.direct_output_b14 = 0;
-	pllcfg.fdbk_div_ctrl_b13 = 0;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
-		pllcfg.cco_bypass_b15 = 1;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
-		pllcfg.direct_output_b14 = 1;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
-		pllcfg.fdbk_div_ctrl_b13 = 1;
-	pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
-	pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
-	pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
-
-	return clk_check_pll_setup(inputclk, &pllcfg);
-}
-
-/*
- * Setup the HCLK PLL with a PLL structure
- */
-static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
-{
-	u32 tv, tmp = 0;
-
-	if (PllSetup->analog_on != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
-	if (PllSetup->cco_bypass_b15 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
-	if (PllSetup->direct_output_b14 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
-	if (PllSetup->fdbk_div_ctrl_b13 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
-
-	tv = ffs(PllSetup->pll_p) - 1;
-	if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
-		return 0;
-
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
-
-	return tmp;
-}
-
-/*
- * Update the ARM core PLL frequency rate variable from the actual PLL setting
- */
-static void local_update_armpll_rate(void)
-{
-	u32 clkin, pllreg;
-
-	clkin = clk_armpll.parent->rate;
-	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
-
-	clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
-}
-
-/*
- * Find a PLL configuration for the selected input frequency
- */
-static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
-	struct clk_pll_setup *pllsetup)
-{
-	u32 ifreq, freqtol, m, n, p, fclkout;
-
-	/* Determine frequency tolerance limits */
-	freqtol = target_freq / 250;
-	ifreq = pllin_freq;
-
-	/* Is direct bypass mode possible? */
-	if (abs(pllin_freq - target_freq) <= freqtol) {
-		pllsetup->analog_on = 0;
-		pllsetup->cco_bypass_b15 = 1;
-		pllsetup->direct_output_b14 = 1;
-		pllsetup->fdbk_div_ctrl_b13 = 1;
-		pllsetup->pll_p = pll_postdivs[0];
-		pllsetup->pll_n = 1;
-		pllsetup->pll_m = 1;
-		return clk_check_pll_setup(ifreq, pllsetup);
-	} else if (target_freq <= ifreq) {
-		pllsetup->analog_on = 0;
-		pllsetup->cco_bypass_b15 = 1;
-		pllsetup->direct_output_b14 = 0;
-		pllsetup->fdbk_div_ctrl_b13 = 1;
-		pllsetup->pll_n = 1;
-		pllsetup->pll_m = 1;
-		for (p = 0; p <= 3; p++) {
-			pllsetup->pll_p = pll_postdivs[p];
-			fclkout = clk_check_pll_setup(ifreq, pllsetup);
-			if (abs(target_freq - fclkout) <= freqtol)
-				return fclkout;
-		}
-	}
-
-	/* Is direct mode possible? */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 1;
-	pllsetup->fdbk_div_ctrl_b13 = 0;
-	pllsetup->pll_p = pll_postdivs[0];
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			/* Compute output frequency for this value */
-			pllsetup->pll_n = n;
-			pllsetup->pll_m = m;
-			fclkout = clk_check_pll_setup(ifreq,
-				pllsetup);
-			if (abs(target_freq - fclkout) <=
-				freqtol)
-				return fclkout;
-		}
-	}
-
-	/* Is integer mode possible? */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 0;
-	pllsetup->fdbk_div_ctrl_b13 = 1;
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			for (p = 0; p < 4; p++) {
-				/* Compute output frequency */
-				pllsetup->pll_p = pll_postdivs[p];
-				pllsetup->pll_n = n;
-				pllsetup->pll_m = m;
-				fclkout = clk_check_pll_setup(
-					ifreq, pllsetup);
-				if (abs(target_freq - fclkout) <= freqtol)
-					return fclkout;
-			}
-		}
-	}
-
-	/* Try non-integer mode */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 0;
-	pllsetup->fdbk_div_ctrl_b13 = 0;
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			for (p = 0; p < 4; p++) {
-				/* Compute output frequency */
-				pllsetup->pll_p = pll_postdivs[p];
-				pllsetup->pll_n = n;
-				pllsetup->pll_m = m;
-				fclkout = clk_check_pll_setup(
-					ifreq, pllsetup);
-				if (abs(target_freq - fclkout) <= freqtol)
-					return fclkout;
-			}
-		}
-	}
-
-	return 0;
-}
-
-static struct clk clk_armpll = {
-	.parent		= &clk_sys,
-	.get_rate	= local_return_parent_rate,
-};
-
-/*
- * Setup the USB PLL with a PLL structure
- */
-static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
-{
-	u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
-	reg |= tmp;
-	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-	return clk_check_pll_setup(clk_usbpll.parent->rate,
-		pHCLKPllSetup);
-}
-
-static int local_usbpll_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	int ret = 0;
-	unsigned long timeout = jiffies + msecs_to_jiffies(20);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-
-	__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
-		LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
-		LPC32XX_CLKPWR_USB_CTRL);
-	__raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
-		LPC32XX_CLKPWR_USB_CTRL);
-
-	if (enable && usb_pll_valid && usb_pll_enable) {
-		ret = -ENODEV;
-		/*
-		 * If the PLL rate has been previously set, then the rate
-		 * in the PLL register is valid and can be enabled here.
-		 * Otherwise, it needs to be enabled as part of setrate.
-		 */
-
-		/*
-		 * Gate clock into PLL
-		 */
-		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-		/*
-		 * Enable PLL
-		 */
-		reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-		/*
-		 * Wait for PLL to lock
-		 */
-		while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
-			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
-				ret = 0;
-			else
-				udelay(10);
-		}
-
-		/*
-		 * Gate clock from PLL if PLL is locked
-		 */
-		if (ret == 0) {
-			__raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
-				LPC32XX_CLKPWR_USB_CTRL);
-		} else {
-			__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
-				LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
-				LPC32XX_CLKPWR_USB_CTRL);
-		}
-	} else if ((enable == 0) && usb_pll_valid  && usb_pll_enable) {
-		usb_pll_valid = 0;
-		usb_pll_enable = 0;
-	}
-
-	return ret;
-}
-
-static unsigned long local_usbpll_round_rate(struct clk *clk,
-	unsigned long rate)
-{
-	u32 clkin, usbdiv;
-	struct clk_pll_setup pllsetup;
-
-	/*
-	 * Unlike other clocks, this clock has a KHz input rate, so bump
-	 * it up to work with the PLL function
-	 */
-	rate = rate * 1000;
-
-	clkin = clk->get_rate(clk);
-	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
-		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
-	clkin = clkin / usbdiv;
-
-	/* Try to find a good rate setup */
-	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
-		return 0;
-
-	return clk_check_pll_setup(clkin, &pllsetup);
-}
-
-static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -ENODEV;
-	u32 clkin, usbdiv;
-	struct clk_pll_setup pllsetup;
-
-	/*
-	 * Unlike other clocks, this clock has a KHz input rate, so bump
-	 * it up to work with the PLL function
-	 */
-	rate = rate * 1000;
-
-	clkin = clk->get_rate(clk->parent);
-	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
-		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
-	clkin = clkin / usbdiv;
-
-	/* Try to find a good rate setup */
-	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
-		return -EINVAL;
-
-	/*
-	 * Disable PLL clocks during PLL change
-	 */
-	local_usbpll_enable(clk, 0);
-	pllsetup.analog_on = 0;
-	local_clk_usbpll_setup(&pllsetup);
-
-	/*
-	 * Start USB PLL and check PLL status
-	 */
-
-	usb_pll_valid = 1;
-	usb_pll_enable = 1;
-
-	ret = local_usbpll_enable(clk, 1);
-	if (ret >= 0)
-		clk->rate = clk_check_pll_setup(clkin, &pllsetup);
-
-	return ret;
-}
-
-static struct clk clk_usbpll = {
-	.parent		= &osc_main,
-	.set_rate	= local_usbpll_set_rate,
-	.enable		= local_usbpll_enable,
-	.rate		= 48000, /* In KHz */
-	.get_rate	= local_return_parent_rate,
-	.round_rate	= local_usbpll_round_rate,
-};
-
-static u32 clk_get_hclk_div(void)
-{
-	static const u32 hclkdivs[4] = {1, 2, 4, 4};
-	return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
-		__raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
-}
-
-static struct clk clk_hclk = {
-	.parent		= &clk_armpll,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_pclk = {
-	.parent		= &clk_armpll,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(clk->enable_reg);
-
-	if (enable == 0)
-		tmp &= ~clk->enable_mask;
-	else
-		tmp |= clk->enable_mask;
-
-	__raw_writel(tmp, clk->enable_reg);
-
-	return 0;
-}
-
-/* Peripheral clock sources */
-static struct clk clk_timer0 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer1 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer2 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer3 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_mpwm = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_wdt = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMER_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_vfp9 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_DEBUG_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_dma = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_DMA_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_pwm = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_PWM_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN |
-			  LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK |
-			  LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) |
-			  LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN |
-			  LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK |
-			  LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1),
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart3 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart4 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart5 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart6 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c2 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= io_p2v(LPC32XX_USB_BASE + 0xFF4),
-	.enable_mask	= 0x4,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_ssp0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_ssp1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_kscan = {
-	.parent		= &osc_32KHz,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_KEY_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_nand = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_NAND_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN |
-			  LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_nand_mlc = {
-	.parent         = &clk_hclk,
-	.enable         = local_onoff_enable,
-	.enable_reg     = LPC32XX_CLKPWR_NAND_CLK_CTRL,
-	.enable_mask    = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN |
-			  LPC32XX_CLKPWR_NANDCLK_DMA_INT |
-			  LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC,
-	.get_rate       = local_return_parent_rate,
-};
-
-static struct clk clk_i2s0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2s1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN |
-			  LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_net = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_MACCLK_CTRL,
-	.enable_mask	= (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
-		LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
-		LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_rtc = {
-	.parent		= &osc_32KHz,
-	.rate		= 1, /* 1 Hz */
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_usb_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	if (enable) {
-		/* Set up I2C pull levels */
-		tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
-		tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE;
-		__raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
-	}
-
-	return local_onoff_enable(clk, enable);
-}
-
-static struct clk clk_usbd = {
-	.parent		= &clk_usbpll,
-	.enable		= local_usb_enable,
-	.enable_reg	= LPC32XX_CLKPWR_USB_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-#define OTG_ALWAYS_MASK		(LPC32XX_USB_OTG_OTG_CLOCK_ON | \
-				 LPC32XX_USB_OTG_I2C_CLOCK_ON)
-
-static int local_usb_otg_enable(struct clk *clk, int enable)
-{
-	int to = 1000;
-
-	if (enable) {
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-		while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
-			clk->enable_mask) != clk->enable_mask) && (to > 0))
-			to--;
-	} else {
-		__raw_writel(OTG_ALWAYS_MASK, clk->enable_reg);
-
-		while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
-			OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0))
-			to--;
-	}
-
-	if (to)
-		return 0;
-	else
-		return -1;
-}
-
-static struct clk clk_usb_otg_dev = {
-	.parent		= &clk_usbpll,
-	.enable		= local_usb_otg_enable,
-	.enable_reg	= LPC32XX_USB_OTG_CLK_CTRL,
-	.enable_mask	= LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
-			  LPC32XX_USB_OTG_OTG_CLOCK_ON |
-			  LPC32XX_USB_OTG_DEV_CLOCK_ON |
-			  LPC32XX_USB_OTG_I2C_CLOCK_ON,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_usb_otg_host = {
-	.parent		= &clk_usbpll,
-	.enable		= local_usb_otg_enable,
-	.enable_reg	= LPC32XX_USB_OTG_CLK_CTRL,
-	.enable_mask	= LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
-			  LPC32XX_USB_OTG_OTG_CLOCK_ON |
-			  LPC32XX_USB_OTG_HOST_CLOCK_ON |
-			  LPC32XX_USB_OTG_I2C_CLOCK_ON,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int tsc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	/* Make sure 32KHz clock is the selected clock */
-	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-	tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
-	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
-	if (enable == 0)
-		__raw_writel(0, clk->enable_reg);
-	else
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-	return 0;
-}
-
-static struct clk clk_tsc = {
-	.parent		= &osc_32KHz,
-	.enable		= tsc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int adc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-	u32 divider;
-
-	/* Use PERIPH_CLOCK */
-	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-	tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
-	/*
-	 * Set clock divider so that we have equal to or less than
-	 * 4.5MHz clock at ADC
-	 */
-	divider = clk->get_rate(clk) / 4500000 + 1;
-	tmp |= divider;
-	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
-	/* synchronize rate of this clock w/ actual HW setting */
-	clk->rate = clk->get_rate(clk->parent) / divider;
-
-	if (enable == 0)
-		__raw_writel(0, clk->enable_reg);
-	else
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-	return 0;
-}
-
-static struct clk clk_adc = {
-	.parent		= &clk_pclk,
-	.enable		= adc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int mmc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
-		~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS);
-
-	/* If rate is 0, disable clock */
-	if (enable != 0)
-		tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
-			LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN;
-
-	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
-	return 0;
-}
-
-static unsigned long mmc_get_rate(struct clk *clk)
-{
-	u32 div, rate, oldclk;
-
-	/* The MMC clock must be on when accessing an MMC register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-		LPC32XX_CLKPWR_MS_CTRL);
-	div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
-
-	/* Get the parent clock rate */
-	rate = clk->parent->get_rate(clk->parent);
-
-	/* Get the MMC controller clock divider value */
-	div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-
-	if (!div)
-		div = 1;
-
-	return rate / div;
-}
-
-static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long div, prate;
-
-	/* Get the parent clock rate */
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate >= prate)
-		return prate;
-
-	div = prate / rate;
-	if (div > 0xf)
-		div = 0xf;
-
-	return prate / div;
-}
-
-static int mmc_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 tmp;
-	unsigned long prate, div, crate = mmc_round_rate(clk, rate);
-
-	prate = clk->parent->get_rate(clk->parent);
-
-	div = prate / crate;
-
-	/* The MMC clock must be on when accessing an MMC register */
-	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
-		~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) |
-		LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
-	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
-	return 0;
-}
-
-static struct clk clk_mmc = {
-	.parent		= &clk_armpll,
-	.set_rate	= mmc_set_rate,
-	.get_rate	= mmc_get_rate,
-	.round_rate	= mmc_round_rate,
-	.enable		= mmc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_MS_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-};
-
-static unsigned long clcd_get_rate(struct clk *clk)
-{
-	u32 tmp, div, rate, oldclk;
-
-	/* The LCD clock must be on when accessing an LCD register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
-	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	rate = clk->parent->get_rate(clk->parent);
-
-	/* Only supports internal clocking */
-	if (tmp & TIM2_BCD)
-		return rate;
-
-	div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
-	tmp = rate / (2 + div);
-
-	return tmp;
-}
-
-static int clcd_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 tmp, prate, div, oldclk;
-
-	/* The LCD clock must be on when accessing an LCD register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate < prate) {
-		/* Find closest divider */
-		div = prate / rate;
-		if (div >= 2) {
-			div -= 2;
-			tmp &= ~TIM2_BCD;
-		}
-
-		tmp &= ~(0xF800001F);
-		tmp |= (div & 0x1F);
-		tmp |= (((div >> 5) & 0x1F) << 27);
-	}
-
-	__raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
-	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	return 0;
-}
-
-static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 prate, div;
-
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate >= prate)
-		rate = prate;
-	else {
-		div = prate / rate;
-		if (div > 0x3ff)
-			div = 0x3ff;
-
-		rate = prate / div;
-	}
-
-	return rate;
-}
-
-static struct clk clk_lcd = {
-	.parent		= &clk_hclk,
-	.set_rate	= clcd_set_rate,
-	.get_rate	= clcd_get_rate,
-	.round_rate	= clcd_round_rate,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_LCDCLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-	/* Don't attempt to disable clock if it has no users */
-	if (clk->usecount > 0) {
-		clk->usecount--;
-
-		/* Only disable clock when it has no more users */
-		if ((clk->usecount == 0) && (clk->enable))
-			clk->enable(clk, 0);
-
-		/* Check parent clocks, they may need to be disabled too */
-		if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	/* Enable parent clocks first and update use counts */
-	if (clk->parent)
-		ret = local_clk_enable(clk->parent);
-
-	if (!ret) {
-		/* Only enable clock if it's currently disabled */
-		if ((clk->usecount == 0) && (clk->enable))
-			ret = clk->enable(clk, 1);
-
-		if (!ret)
-			clk->usecount++;
-		else if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-
-	return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- */
-int clk_enable(struct clk *clk)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&global_clkregs_lock, flags);
-	ret = local_clk_enable(clk);
-	spin_unlock_irqrestore(&global_clkregs_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required
- */
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&global_clkregs_lock, flags);
-	local_clk_disable(clk);
-	spin_unlock_irqrestore(&global_clkregs_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->get_rate(clk);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * clk_set_rate - set the clock rate for a clock source
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	/*
-	 * Most system clocks can only be enabled or disabled, with
-	 * the actual rate set as part of the peripheral dividers
-	 * instead of high level clock control
-	 */
-	if (clk->set_rate)
-		ret = clk->set_rate(clk, rate);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->round_rate)
-		rate = clk->round_rate(clk, rate);
-	else
-		rate = clk->get_rate(clk);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*
- * clk_set_parent - set the parent clock source for this clock
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	/* Clock re-parenting is not supported */
-	return -EINVAL;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/*
- * clk_get_parent - get the parent clock source for this clock
- */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static struct clk_lookup lookups[] = {
-	CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz),
-	CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397),
-	CLKDEV_INIT(NULL, "osc_main", &osc_main),
-	CLKDEV_INIT(NULL, "sys_ck", &clk_sys),
-	CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll),
-	CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll),
-	CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk),
-	CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk),
-	CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0),
-	CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1),
-	CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2),
-	CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3),
-	CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9),
-	CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
-	CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
-	CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm),
-	CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm),
-	CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
-	CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
-	CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),
-	CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6),
-	CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0),
-	CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1),
-	CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
-	CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
-	CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
-	CLKDEV_INIT("40050000.key", NULL, &clk_kscan),
-	CLKDEV_INIT("20020000.flash", NULL, &clk_nand),
-	CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc),
-	CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
-	CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
-	CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
-	CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc),
-	CLKDEV_INIT("20098000.sd", NULL, &clk_mmc),
-	CLKDEV_INIT("31060000.ethernet", NULL, &clk_net),
-	CLKDEV_INIT("dev:clcd", NULL, &clk_lcd),
-	CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd),
-	CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd),
-	CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev),
-	CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host),
-	CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc),
-};
-
-static int __init clk_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/*
-	 * Setup muxed SYSCLK for HCLK PLL base -this selects the
-	 * parent clock used for the ARM PLL and is used to derive
-	 * the many system clock rates in the device.
-	 */
-	if (clk_is_sysclk_mainosc() != 0)
-		clk_sys.parent = &osc_main;
-	else
-		clk_sys.parent = &osc_pll397;
-
-	clk_sys.rate = clk_sys.parent->rate;
-
-	/* Compute the current ARM PLL and USB PLL frequencies */
-	local_update_armpll_rate();
-
-	/* Compute HCLK and PCLK bus rates */
-	clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
-	clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
-
-	/*
-	 * Enable system clocks - this step is somewhat formal, as the
-	 * clocks are already running, but it does get the clock data
-	 * inline with the actual system state. Never disable these
-	 * clocks as they will only stop if the system is going to sleep.
-	 * In that case, the chip/system power management functions will
-	 * handle clock gating.
-	 */
-	if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
-		printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
-
-	/*
-	 * Timers 0 and 1 were enabled and are being used by the high
-	 * resolution tick function prior to this driver being initialized.
-	 * Tag them now as used.
-	 */
-	if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
-		printk(KERN_ERR "Error enabling timer tick clocks\n");
-
-	return 0;
-}
-core_initcall(clk_init);
-
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 716e83eb1..2f6067bce 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -17,13 +17,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/io.h>
 
 #include <asm/mach/map.h>
 #include <asm/system_info.h>
@@ -44,19 +37,6 @@ void lpc32xx_get_uid(u32 devid[4])
 }
 
 /*
- * Returns SYSCLK source
- * 0 = PLL397, 1 = main oscillator
- */
-int clk_is_sysclk_mainosc(void)
-{
-	if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) &
-		LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0)
-		return 1;
-
-	return 0;
-}
-
-/*
  * Detects and returns IRAM size for the device variation
  */
 #define LPC32XX_IRAM_BANK_SIZE SZ_128K
@@ -87,81 +67,6 @@ u32 lpc32xx_return_iram_size(void)
 }
 EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size);
 
-/*
- * Computes PLL rate from PLL register and input clock
- */
-u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup)
-{
-	u32 ilfreq, p, m, n, fcco, fref, cfreq;
-	int mode;
-
-	/*
-	 * PLL requirements
-	 * ifreq must be >= 1MHz and <= 20MHz
-	 * FCCO must be >= 156MHz and <= 320MHz
-	 * FREF must be >= 1MHz and <= 27MHz
-	 * Assume the passed input data is not valid
-	 */
-
-	ilfreq = ifreq;
-	m = pllsetup->pll_m;
-	n = pllsetup->pll_n;
-	p = pllsetup->pll_p;
-
-	mode = (pllsetup->cco_bypass_b15 << 2) |
-		(pllsetup->direct_output_b14 << 1) |
-	pllsetup->fdbk_div_ctrl_b13;
-
-	switch (mode) {
-	case 0x0: /* Non-integer mode */
-		cfreq = (m * ilfreq) / (2 * p * n);
-		fcco = (m * ilfreq) / n;
-		fref = ilfreq / n;
-		break;
-
-	case 0x1: /* integer mode */
-		cfreq = (m * ilfreq) / n;
-		fcco = (m * ilfreq) / (n * 2 * p);
-		fref = ilfreq / n;
-		break;
-
-	case 0x2:
-	case 0x3: /* Direct mode */
-		cfreq = (m * ilfreq) / n;
-		fcco = cfreq;
-		fref = ilfreq / n;
-		break;
-
-	case 0x4:
-	case 0x5: /* Bypass mode */
-		cfreq = ilfreq / (2 * p);
-		fcco = 156000000;
-		fref = 1000000;
-		break;
-
-	case 0x6:
-	case 0x7: /* Direct bypass mode */
-	default:
-		cfreq = ilfreq;
-		fcco = 156000000;
-		fref = 1000000;
-		break;
-	}
-
-	if (fcco < 156000000 || fcco > 320000000)
-		cfreq = 0;
-
-	if (fref < 1000000 || fref > 27000000)
-		cfreq = 0;
-
-	return (u32) cfreq;
-}
-
-u32 clk_get_pclk_div(void)
-{
-	return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F);
-}
-
 static struct map_desc lpc32xx_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_AHB0_START),
@@ -194,21 +99,6 @@ void __init lpc32xx_map_io(void)
 	iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
 }
 
-void lpc23xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Make sure WDT clocks are enabled */
-	__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
-		LPC32XX_CLKPWR_TIMER_CLK_CTRL);
-
-	/* Instant assert of RESETOUT_N with pulse length 1mS */
-	__raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
-	__raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
-
-	/* Wait for watchdog to reset system */
-	while (1)
-		;
-}
-
 static int __init lpc32xx_check_uid(void)
 {
 	u32 uid[4];
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 1cd8853b2..30c9e64fc 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -19,37 +19,14 @@
 #ifndef __LPC32XX_COMMON_H
 #define __LPC32XX_COMMON_H
 
-#include <mach/board.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
+#include <linux/init.h>
 
 /*
  * Other arch specific structures and functions
  */
-extern void lpc32xx_timer_init(void);
 extern void __init lpc32xx_init_irq(void);
 extern void __init lpc32xx_map_io(void);
 extern void __init lpc32xx_serial_init(void);
-extern void lpc23xx_restart(enum reboot_mode, const char *);
-
-
-/*
- * Structure used for setting up and querying the PLLS
- */
-struct clk_pll_setup {
-	int analog_on;
-	int cco_bypass_b15;
-	int direct_output_b14;
-	int fdbk_div_ctrl_b13;
-	int pll_p;
-	int pll_n;
-	u32 pll_m;
-};
-
-extern int clk_is_sysclk_mainosc(void);
-extern u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup);
-extern u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval);
-extern u32 clk_get_pclk_div(void);
 
 /*
  * Returns the LPC32xx unique 128-bit chip ID
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
index 9e3b90df3..00190535d 100644
--- a/arch/arm/mach-lpc32xx/include/mach/irqs.h
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -112,6 +112,6 @@
 #define IRQ_LPC32XX_GPI_06		LPC32XX_SIC2_IRQ(28)
 #define IRQ_LPC32XX_SYSCLK		LPC32XX_SIC2_IRQ(31)
 
-#define NR_IRQS				96
+#define LPC32XX_NR_IRQS			96
 
 #endif
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
deleted file mode 100644
index d4f7dc870..000000000
--- a/arch/arm/mach-lpc32xx/irq.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/irq.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/irqdomain.h>
-#include <linux/module.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-/*
- * Default value representing the Activation polarity of all internal
- * interrupt sources
- */
-#define MIC_APR_DEFAULT		0x3FF0EFE0
-#define SIC1_APR_DEFAULT	0xFBD27186
-#define SIC2_APR_DEFAULT	0x801810C0
-
-/*
- * Default value representing the Activation Type of all internal
- * interrupt sources. All are level sensitive.
- */
-#define MIC_ATR_DEFAULT		0x00000000
-#define SIC1_ATR_DEFAULT	0x00026000
-#define SIC2_ATR_DEFAULT	0x00000000
-
-static struct irq_domain *lpc32xx_mic_domain;
-static struct device_node *lpc32xx_mic_np;
-
-struct lpc32xx_event_group_regs {
-	void __iomem *enab_reg;
-	void __iomem *edge_reg;
-	void __iomem *maskstat_reg;
-	void __iomem *rawstat_reg;
-};
-
-static const struct lpc32xx_event_group_regs lpc32xx_event_int_regs = {
-	.enab_reg = LPC32XX_CLKPWR_INT_ER,
-	.edge_reg = LPC32XX_CLKPWR_INT_AP,
-	.maskstat_reg = LPC32XX_CLKPWR_INT_SR,
-	.rawstat_reg = LPC32XX_CLKPWR_INT_RS,
-};
-
-static const struct lpc32xx_event_group_regs lpc32xx_event_pin_regs = {
-	.enab_reg = LPC32XX_CLKPWR_PIN_ER,
-	.edge_reg = LPC32XX_CLKPWR_PIN_AP,
-	.maskstat_reg = LPC32XX_CLKPWR_PIN_SR,
-	.rawstat_reg = LPC32XX_CLKPWR_PIN_RS,
-};
-
-struct lpc32xx_event_info {
-	const struct lpc32xx_event_group_regs *event_group;
-	u32 mask;
-};
-
-/*
- * Maps an IRQ number to and event mask and register
- */
-static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
-	[IRQ_LPC32XX_GPI_08] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT,
-	},
-	[IRQ_LPC32XX_GPI_09] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT,
-	},
-	[IRQ_LPC32XX_GPI_19] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT,
-	},
-	[IRQ_LPC32XX_GPI_07] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT,
-	},
-	[IRQ_LPC32XX_GPI_00] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT,
-	},
-	[IRQ_LPC32XX_GPI_01] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT,
-	},
-	[IRQ_LPC32XX_GPI_02] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT,
-	},
-	[IRQ_LPC32XX_GPI_03] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT,
-	},
-	[IRQ_LPC32XX_GPI_04] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT,
-	},
-	[IRQ_LPC32XX_GPI_05] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT,
-	},
-	[IRQ_LPC32XX_GPI_06] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
-	},
-	[IRQ_LPC32XX_GPI_28] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_00] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_01] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_02] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_03] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_04] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_05] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT,
-	},
-	[IRQ_LPC32XX_KEY] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
-	},
-	[IRQ_LPC32XX_ETHERNET] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_MAC_BIT,
-	},
-	[IRQ_LPC32XX_USB_OTG_ATX] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,
-	},
-	[IRQ_LPC32XX_USB_HOST] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_USB_BIT,
-	},
-	[IRQ_LPC32XX_RTC] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_RTC_BIT,
-	},
-	[IRQ_LPC32XX_MSTIMER] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT,
-	},
-	[IRQ_LPC32XX_TS_AUX] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT,
-	},
-	[IRQ_LPC32XX_TS_P] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_TS_P_BIT,
-	},
-	[IRQ_LPC32XX_TS_IRQ] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_ADC_BIT,
-	},
-};
-
-static void get_controller(unsigned int irq, unsigned int *base,
-	unsigned int *irqbit)
-{
-	if (irq < 32) {
-		*base = LPC32XX_MIC_BASE;
-		*irqbit = 1 << irq;
-	} else if (irq < 64) {
-		*base = LPC32XX_SIC1_BASE;
-		*irqbit = 1 << (irq - 32);
-	} else {
-		*base = LPC32XX_SIC2_BASE;
-		*irqbit = 1 << (irq - 64);
-	}
-}
-
-static void lpc32xx_mask_irq(struct irq_data *d)
-{
-	unsigned int reg, ctrl, mask;
-
-	get_controller(d->hwirq, &ctrl, &mask);
-
-	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
-	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
-}
-
-static void lpc32xx_unmask_irq(struct irq_data *d)
-{
-	unsigned int reg, ctrl, mask;
-
-	get_controller(d->hwirq, &ctrl, &mask);
-
-	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
-	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
-}
-
-static void lpc32xx_ack_irq(struct irq_data *d)
-{
-	unsigned int ctrl, mask;
-
-	get_controller(d->hwirq, &ctrl, &mask);
-
-	__raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
-
-	/* Also need to clear pending wake event */
-	if (lpc32xx_events[d->hwirq].mask != 0)
-		__raw_writel(lpc32xx_events[d->hwirq].mask,
-			lpc32xx_events[d->hwirq].event_group->rawstat_reg);
-}
-
-static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
-	int use_edge)
-{
-	unsigned int reg, ctrl, mask;
-
-	get_controller(irq, &ctrl, &mask);
-
-	/* Activation level, high or low */
-	reg = __raw_readl(LPC32XX_INTC_POLAR(ctrl));
-	if (use_high_level)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	__raw_writel(reg, LPC32XX_INTC_POLAR(ctrl));
-
-	/* Activation type, edge or level */
-	reg = __raw_readl(LPC32XX_INTC_ACT_TYPE(ctrl));
-	if (use_edge)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	__raw_writel(reg, LPC32XX_INTC_ACT_TYPE(ctrl));
-
-	/* Use same polarity for the wake events */
-	if (lpc32xx_events[irq].mask != 0) {
-		reg = __raw_readl(lpc32xx_events[irq].event_group->edge_reg);
-
-		if (use_high_level)
-			reg |= lpc32xx_events[irq].mask;
-		else
-			reg &= ~lpc32xx_events[irq].mask;
-
-		__raw_writel(reg, lpc32xx_events[irq].event_group->edge_reg);
-	}
-}
-
-static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		/* Rising edge sensitive */
-		__lpc32xx_set_irq_type(d->hwirq, 1, 1);
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		/* Falling edge sensitive */
-		__lpc32xx_set_irq_type(d->hwirq, 0, 1);
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		/* Low level sensitive */
-		__lpc32xx_set_irq_type(d->hwirq, 0, 0);
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		/* High level sensitive */
-		__lpc32xx_set_irq_type(d->hwirq, 1, 0);
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-		break;
-
-	/* Other modes are not supported */
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
-{
-	unsigned long eventreg;
-
-	if (lpc32xx_events[d->hwirq].mask != 0) {
-		eventreg = __raw_readl(lpc32xx_events[d->hwirq].
-			event_group->enab_reg);
-
-		if (state)
-			eventreg |= lpc32xx_events[d->hwirq].mask;
-		else {
-			eventreg &= ~lpc32xx_events[d->hwirq].mask;
-
-			/*
-			 * When disabling the wakeup, clear the latched
-			 * event
-			 */
-			__raw_writel(lpc32xx_events[d->hwirq].mask,
-				lpc32xx_events[d->hwirq].
-				event_group->rawstat_reg);
-		}
-
-		__raw_writel(eventreg,
-			lpc32xx_events[d->hwirq].event_group->enab_reg);
-
-		return 0;
-	}
-
-	/* Clear event */
-	__raw_writel(lpc32xx_events[d->hwirq].mask,
-		lpc32xx_events[d->hwirq].event_group->rawstat_reg);
-
-	return -ENODEV;
-}
-
-static void __init lpc32xx_set_default_mappings(unsigned int apr,
-	unsigned int atr, unsigned int offset)
-{
-	unsigned int i;
-
-	/* Set activation levels for each interrupt */
-	i = 0;
-	while (i < 32) {
-		__lpc32xx_set_irq_type(offset + i, ((apr >> i) & 0x1),
-			((atr >> i) & 0x1));
-		i++;
-	}
-}
-
-static struct irq_chip lpc32xx_irq_chip = {
-	.name = "MIC",
-	.irq_ack = lpc32xx_ack_irq,
-	.irq_mask = lpc32xx_mask_irq,
-	.irq_unmask = lpc32xx_unmask_irq,
-	.irq_set_type = lpc32xx_set_irq_type,
-	.irq_set_wake = lpc32xx_irq_wake
-};
-
-static void lpc32xx_sic1_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC1_BASE));
-
-	while (ints != 0) {
-		int irqno = fls(ints) - 1;
-
-		ints &= ~(1 << irqno);
-
-		generic_handle_irq(LPC32XX_SIC1_IRQ(irqno));
-	}
-}
-
-static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC2_BASE));
-
-	while (ints != 0) {
-		int irqno = fls(ints) - 1;
-
-		ints &= ~(1 << irqno);
-
-		generic_handle_irq(LPC32XX_SIC2_IRQ(irqno));
-	}
-}
-
-static int __init __lpc32xx_mic_of_init(struct device_node *node,
-					struct device_node *parent)
-{
-	lpc32xx_mic_np = node;
-
-	return 0;
-}
-
-static const struct of_device_id mic_of_match[] __initconst = {
-	{ .compatible = "nxp,lpc3220-mic", .data = __lpc32xx_mic_of_init },
-	{ }
-};
-
-void __init lpc32xx_init_irq(void)
-{
-	unsigned int i;
-
-	/* Setup MIC */
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_MIC_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_MIC_BASE));
-
-	/* Setup SIC1 */
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-	__raw_writel(SIC1_ATR_DEFAULT,
-				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
-
-	/* Setup SIC2 */
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-	__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-	__raw_writel(SIC2_ATR_DEFAULT,
-				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
-
-	/* Configure supported IRQ's */
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &lpc32xx_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	/* Set default mappings */
-	lpc32xx_set_default_mappings(MIC_APR_DEFAULT, MIC_ATR_DEFAULT, 0);
-	lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32);
-	lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64);
-
-	/* Initially disable all wake events */
-	__raw_writel(0, LPC32XX_CLKPWR_P01_ER);
-	__raw_writel(0, LPC32XX_CLKPWR_INT_ER);
-	__raw_writel(0, LPC32XX_CLKPWR_PIN_ER);
-
-	/*
-	 * Default wake activation polarities, all pin sources are low edge
-	 * triggered
-	 */
-	__raw_writel(LPC32XX_CLKPWR_INTSRC_TS_P_BIT |
-		LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT |
-		LPC32XX_CLKPWR_INTSRC_RTC_BIT,
-		LPC32XX_CLKPWR_INT_AP);
-	__raw_writel(0, LPC32XX_CLKPWR_PIN_AP);
-
-	/* Clear latched wake event states */
-	__raw_writel(__raw_readl(LPC32XX_CLKPWR_PIN_RS),
-		LPC32XX_CLKPWR_PIN_RS);
-	__raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
-		LPC32XX_CLKPWR_INT_RS);
-
-	of_irq_init(mic_of_match);
-
-	lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS,
-						   0, 0, &irq_domain_simple_ops,
-						   NULL);
-	if (!lpc32xx_mic_domain)
-		panic("Unable to add MIC irq domain\n");
-
-	/* MIC SUBIRQx interrupts will route handling to the chain handlers */
-	irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler);
-	irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler);
-}
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 7858d5b6f..0e4cbbe98 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -36,7 +36,6 @@
 #include <linux/clk.h>
 #include <linux/mtd/lpc32xx_slc.h>
 #include <linux/mtd/lpc32xx_mlc.h>
-#include <linux/platform_data/gpio-lpc32xx.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -48,13 +47,6 @@
 #include "common.h"
 
 /*
- * Mapped GPIOLIB GPIOs
- */
-#define LCD_POWER_GPIO		LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
-#define BKL_POWER_GPIO		LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
-#define MMC_PWR_ENABLE_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5)
-
-/*
  * AMBA LCD controller
  */
 static struct clcd_panel conn_lcd_panel = {
@@ -86,8 +78,8 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb)
 {
 	dma_addr_t dma;
 
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
-		PANEL_SIZE, &dma, GFP_KERNEL);
+	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma,
+					  GFP_KERNEL);
 	if (!fb->fb.screen_base) {
 		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 		return -ENOMEM;
@@ -97,59 +89,25 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb)
 	fb->fb.fix.smem_len = PANEL_SIZE;
 	fb->panel = &conn_lcd_panel;
 
-	if (gpio_request(LCD_POWER_GPIO, "LCD power"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			LCD_POWER_GPIO);
-	else if (gpio_direction_output(LCD_POWER_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			LCD_POWER_GPIO);
-
-	if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			BKL_POWER_GPIO);
-	else if (gpio_direction_output(BKL_POWER_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			BKL_POWER_GPIO);
-
 	return 0;
 }
 
 static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 {
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-		fb->fb.screen_base, fb->fb.fix.smem_start,
-		fb->fb.fix.smem_len);
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 }
 
 static void lpc32xx_clcd_remove(struct clcd_fb *fb)
 {
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-		fb->fb.screen_base, fb->fb.fix.smem_start);
-}
-
-/*
- * On some early LCD modules (1307.0), the backlight logic is inverted.
- * For those board variants, swap the disable and enable states for
- * BKL_POWER_GPIO.
-*/
-static void clcd_disable(struct clcd_fb *fb)
-{
-	gpio_set_value(BKL_POWER_GPIO, 0);
-	gpio_set_value(LCD_POWER_GPIO, 0);
-}
-
-static void clcd_enable(struct clcd_fb *fb)
-{
-	gpio_set_value(BKL_POWER_GPIO, 1);
-	gpio_set_value(LCD_POWER_GPIO, 1);
+	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
+		    fb->fb.fix.smem_start);
 }
 
 static struct clcd_board lpc32xx_clcd_data = {
 	.name		= "Phytec LCD",
 	.check		= clcdfb_check,
 	.decode		= clcdfb_decode,
-	.disable	= clcd_disable,
-	.enable		= clcd_enable,
 	.setup		= lpc32xx_clcd_setup,
 	.mmap		= lpc32xx_clcd_mmap,
 	.remove		= lpc32xx_clcd_remove,
@@ -188,20 +146,9 @@ static struct pl08x_platform_data pl08x_pd = {
 	.mem_buses = PL08X_AHB1,
 };
 
-static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios)
-{
-	/* Only on and off are supported */
-	if (ios->power_mode == MMC_POWER_OFF)
-		gpio_set_value(MMC_PWR_ENABLE_GPIO, 0);
-	else
-		gpio_set_value(MMC_PWR_ENABLE_GPIO, 1);
-	return 0;
-}
-
 static struct mmci_platform_data lpc32xx_mmci_data = {
 	.ocr_mask	= MMC_VDD_30_31 | MMC_VDD_31_32 |
 			  MMC_VDD_32_33 | MMC_VDD_33_34,
-	.ios_handler	= mmc_handle_ios,
 };
 
 static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
@@ -244,11 +191,10 @@ static void __init lpc3250_machine_init(void)
 		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
 		LPC32XX_CLKPWR_TEST_CLK_SEL);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     lpc32xx_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, lpc32xx_auxdata_lookup, NULL);
 }
 
-static char const *lpc32xx_dt_compat[] __initdata = {
+static const char *const lpc32xx_dt_compat[] __initconst = {
 	"nxp,lpc3220",
 	"nxp,lpc3230",
 	"nxp,lpc3240",
@@ -259,9 +205,6 @@ static char const *lpc32xx_dt_compat[] __initdata = {
 DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
 	.atag_offset	= 0x100,
 	.map_io		= lpc32xx_map_io,
-	.init_irq	= lpc32xx_init_irq,
-	.init_time	= lpc32xx_timer_init,
 	.init_machine	= lpc3250_machine_init,
 	.dt_compat	= lpc32xx_dt_compat,
-	.restart	= lpc23xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 05621a29f..1931229a1 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -76,9 +76,6 @@ void __init lpc32xx_serial_init(void)
 	unsigned int puart;
 	int i, j;
 
-	/* UART clocks are off, let clock driver manage them */
-	__raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
-
 	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 		clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
 		if (!IS_ERR(clk)) {
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
deleted file mode 100644
index 4e5837299..000000000
--- a/arch/arm/mach-lpc32xx/timer.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/timer.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2009 - 2010 NXP Semiconductors
- * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
- *                    Ed Schouten <e.schouten@fontys.nl>
- *                    Laurens Timmermans <l.timmermans@fontys.nl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/err.h>
-#include <linux/clockchips.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-static int lpc32xx_clkevt_next_event(unsigned long delta,
-    struct clock_event_device *dev)
-{
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-
-	return 0;
-}
-
-static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
-    struct clock_event_device *dev)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		WARN_ON(1);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/*
-		 * Disable the timer. When using oneshot, we must also
-		 * disable the timer to wait for the first call to
-		 * set_next_event().
-		 */
-		__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device lpc32xx_clkevt = {
-	.name		= "lpc32xx_clkevt",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 300,
-	.set_next_event	= lpc32xx_clkevt_next_event,
-	.set_mode	= lpc32xx_clkevt_mode,
-};
-
-static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &lpc32xx_clkevt;
-
-	/* Clear match */
-	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
-		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction lpc32xx_timer_irq = {
-	.name		= "LPC32XX Timer Tick",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= lpc32xx_timer_interrupt,
-};
-
-/*
- * The clock management driver isn't initialized at this point, so the
- * clocks need to be enabled here manually and then tagged as used in
- * the clock driver initialization
- */
-void __init lpc32xx_timer_init(void)
-{
-	u32 clkrate, pllreg;
-
-	/* Enable timer clock */
-	__raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
-		LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
-		LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
-
-	/*
-	 * The clock driver isn't initialized at this point. So determine if
-	 * the SYSCLK is driven from the PLL397 or main oscillator and then use
-	 * it to compute the PLL frequency and the PCLK divider to get the base
-	 * timer rates. This rate is needed to compute the tick rate.
-	 */
-	if (clk_is_sysclk_mainosc() != 0)
-		clkrate = LPC32XX_MAIN_OSC_FREQ;
-	else
-		clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
-
-	/* Get ARM HCLKPLL register and convert it into a frequency */
-	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
-	clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
-
-	/* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
-	clkrate = clkrate / clk_get_pclk_div();
-
-	/* Initial timer setup */
-	__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
-		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-	__raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
-		LPC32XX_TIMER_CNTR_MCR_STOP(0) |
-		LPC32XX_TIMER_CNTR_MCR_RESET(0),
-		LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
-
-	/* Setup tick interrupt */
-	setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
-
-	/* Setup the clockevent structure. */
-	lpc32xx_clkevt.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1);
-
-	/* Use timer1 as clock source. */
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-
-	clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
-		"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
-}
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 9f59e58da..70e49d544 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -1,13 +1,19 @@
 menuconfig ARCH_MEDIATEK
-	bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7
+	bool "Mediatek MT65xx & MT81xx SoC"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select PINCTRL
 	select MTK_TIMER
+	select MFD_SYSCON
 	help
 	  Support for Mediatek MT65xx & MT81xx SoCs
 
 if ARCH_MEDIATEK
 
+config MACH_MT2701
+	bool "MediaTek MT2701 SoCs support"
+	default ARCH_MEDIATEK
+
 config MACH_MT6589
 	bool "MediaTek MT6589 SoCs support"
 	default ARCH_MEDIATEK
@@ -16,6 +22,10 @@ config MACH_MT6592
 	bool "MediaTek MT6592 SoCs support"
 	default ARCH_MEDIATEK
 
+config MACH_MT7623
+	bool "MediaTek MT7623 SoCs support"
+	default ARCH_MEDIATEK
+
 config MACH_MT8127
 	bool "MediaTek MT8127 SoCs support"
 	default ARCH_MEDIATEK
diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile
index 43e619f56..21164605b 100644
--- a/arch/arm/mach-mediatek/Makefile
+++ b/arch/arm/mach-mediatek/Makefile
@@ -1 +1,4 @@
+ifeq ($(CONFIG_SMP),y)
+obj-$(CONFIG_ARCH_MEDIATEK) += platsmp.o
+endif
 obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index a95490050..a6e3c98b9 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -16,10 +16,39 @@
  */
 #include <linux/init.h>
 #include <asm/mach/arch.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+
+
+#define GPT6_CON_MT65xx 0x10008060
+#define GPT_ENABLE      0x31
+
+static void __init mediatek_timer_init(void)
+{
+	void __iomem *gpt_base;
+
+	if (of_machine_is_compatible("mediatek,mt6589") ||
+	    of_machine_is_compatible("mediatek,mt7623") ||
+	    of_machine_is_compatible("mediatek,mt8135") ||
+	    of_machine_is_compatible("mediatek,mt8127")) {
+		/* turn on GPT6 which ungates arch timer clocks */
+		gpt_base = ioremap(GPT6_CON_MT65xx, 0x04);
+
+		/* enable clock and set to free-run */
+		writel(GPT_ENABLE, gpt_base);
+		iounmap(gpt_base);
+	}
+
+	of_clk_init(NULL);
+	clocksource_probe();
+};
 
 static const char * const mediatek_board_dt_compat[] = {
+	"mediatek,mt2701",
 	"mediatek,mt6589",
 	"mediatek,mt6592",
+	"mediatek,mt7623",
 	"mediatek,mt8127",
 	"mediatek,mt8135",
 	NULL,
@@ -27,4 +56,5 @@ static const char * const mediatek_board_dt_compat[] = {
 
 DT_MACHINE_START(MEDIATEK_DT, "Mediatek Cortex-A7 (Device Tree)")
 	.dt_compat	= mediatek_board_dt_compat,
+	.init_time	= mediatek_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
new file mode 100644
index 000000000..b821e3447
--- /dev/null
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-mediatek/platsmp.c
+ *
+ * Copyright (c) 2014 Mediatek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *         Yingjoe Chen <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/string.h>
+#include <linux/threads.h>
+
+#define MTK_MAX_CPU		8
+#define MTK_SMP_REG_SIZE	0x1000
+
+struct mtk_smp_boot_info {
+	unsigned long smp_base;
+	unsigned int jump_reg;
+	unsigned int core_keys[MTK_MAX_CPU - 1];
+	unsigned int core_regs[MTK_MAX_CPU - 1];
+};
+
+static const struct mtk_smp_boot_info mtk_mt8135_tz_boot = {
+	0x80002000, 0x3fc,
+	{ 0x534c4131, 0x4c415332, 0x41534c33 },
+	{ 0x3f8, 0x3f8, 0x3f8 },
+};
+
+static const struct mtk_smp_boot_info mtk_mt6589_boot = {
+	0x10002000, 0x34,
+	{ 0x534c4131, 0x4c415332, 0x41534c33 },
+	{ 0x38, 0x3c, 0x40 },
+};
+
+static const struct mtk_smp_boot_info mtk_mt7623_boot = {
+	0x10202000, 0x34,
+	{ 0x534c4131, 0x4c415332, 0x41534c33 },
+	{ 0x38, 0x3c, 0x40 },
+};
+
+static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
+	{ .compatible   = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot },
+	{ .compatible   = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot },
+	{ .compatible   = "mediatek,mt2701", .data = &mtk_mt8135_tz_boot },
+};
+
+static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
+	{ .compatible   = "mediatek,mt6589", .data = &mtk_mt6589_boot },
+	{ .compatible   = "mediatek,mt7623", .data = &mtk_mt7623_boot },
+};
+
+static void __iomem *mtk_smp_base;
+static const struct mtk_smp_boot_info *mtk_smp_info;
+
+static int mtk_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	if (!mtk_smp_base)
+		return -EINVAL;
+
+	if (!mtk_smp_info->core_keys[cpu-1])
+		return -EINVAL;
+
+	writel_relaxed(mtk_smp_info->core_keys[cpu-1],
+		mtk_smp_base + mtk_smp_info->core_regs[cpu-1]);
+
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	return 0;
+}
+
+static void __init __mtk_smp_prepare_cpus(unsigned int max_cpus, int trustzone)
+{
+	int i, num;
+	const struct of_device_id *infos;
+
+	if (trustzone) {
+		num = ARRAY_SIZE(mtk_tz_smp_boot_infos);
+		infos = mtk_tz_smp_boot_infos;
+	} else {
+		num = ARRAY_SIZE(mtk_smp_boot_infos);
+		infos = mtk_smp_boot_infos;
+	}
+
+	/* Find smp boot info for this SoC */
+	for (i = 0; i < num; i++) {
+		if (of_machine_is_compatible(infos[i].compatible)) {
+			mtk_smp_info = infos[i].data;
+			break;
+		}
+	}
+
+	if (!mtk_smp_info) {
+		pr_err("%s: Device is not supported\n", __func__);
+		return;
+	}
+
+	if (trustzone) {
+		/* smp_base(trustzone-bootinfo) is reserved by device tree */
+		mtk_smp_base = phys_to_virt(mtk_smp_info->smp_base);
+	} else {
+		mtk_smp_base = ioremap(mtk_smp_info->smp_base, MTK_SMP_REG_SIZE);
+		if (!mtk_smp_base) {
+			pr_err("%s: Can't remap %lx\n", __func__,
+				mtk_smp_info->smp_base);
+			return;
+		}
+	}
+
+	/*
+	 * write the address of slave startup address into the system-wide
+	 * jump register
+	 */
+	writel_relaxed(virt_to_phys(secondary_startup_arm),
+			mtk_smp_base + mtk_smp_info->jump_reg);
+}
+
+static void __init mtk_tz_smp_prepare_cpus(unsigned int max_cpus)
+{
+	__mtk_smp_prepare_cpus(max_cpus, 1);
+}
+
+static void __init mtk_smp_prepare_cpus(unsigned int max_cpus)
+{
+	__mtk_smp_prepare_cpus(max_cpus, 0);
+}
+
+static const struct smp_operations mt81xx_tz_smp_ops __initconst = {
+	.smp_prepare_cpus = mtk_tz_smp_prepare_cpus,
+	.smp_boot_secondary = mtk_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mt81xx_tz_smp, "mediatek,mt81xx-tz-smp", &mt81xx_tz_smp_ops);
+
+static const struct smp_operations mt6589_smp_ops __initconst = {
+	.smp_prepare_cpus = mtk_smp_prepare_cpus,
+	.smp_boot_secondary = mtk_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mt6589_smp, "mediatek,mt6589-smp", &mt6589_smp_ops);
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 0743e2059..b6e3acc63 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -1,11 +1,14 @@
 menuconfig ARCH_MESON
-	bool "Amlogic Meson SoCs" if ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	bool "Amlogic Meson SoCs"
+	depends on ARCH_MULTI_V7
+	select GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select ARM_GIC
 	select CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_MESON
+	select COMMON_CLK
+	select COMMON_CLK_AMLOGIC
 
 if ARCH_MESON
 
@@ -19,4 +22,10 @@ config MACH_MESON8
 	default ARCH_MESON
 	select MESON6_TIMER
 
+config MACH_MESON8B
+	bool "Amlogic Meson8b SoCs support"
+	default ARCH_MESON
+	select MESON6_TIMER
+	select COMMON_CLK_MESON8B
+
 endif
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
index 5d6affe6a..4e2357178 100644
--- a/arch/arm/mach-meson/meson.c
+++ b/arch/arm/mach-meson/meson.c
@@ -19,6 +19,7 @@
 static const char * const meson_common_board_compat[] = {
 	"amlogic,meson6",
 	"amlogic,meson8",
+	"amlogic,meson8b",
 	NULL,
 };
 
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index fdbfadf00..94500bed5 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,9 +1,22 @@
+menuconfig ARCH_MMP
+	bool "Marvell PXA168/910/MMP2"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
+	select GPIO_PXA
+	select GPIOLIB
+	select PINCTRL
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
+
 if ARCH_MMP
 
-menu "Marvell PXA168/910/MMP2 Implmentations"
+menu "Marvell PXA168/910/MMP2 Implementations"
+
+if ATAGS
 
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -11,6 +24,7 @@ config MACH_ASPENITE
 
 config MACH_ZYLONITE2
 	bool "Marvell's PXA168 Zylonite2 Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -18,6 +32,7 @@ config MACH_ZYLONITE2
 
 config MACH_AVENGERS_LITE
 	bool "Marvell's PXA168 Avengers Lite Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -25,6 +40,7 @@ config MACH_AVENGERS_LITE
 
 config MACH_TAVOREVB
 	bool "Marvell's PXA910 TavorEVB Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -32,6 +48,7 @@ config MACH_TAVOREVB
 
 config MACH_TTC_DKB
 	bool "Marvell's PXA910 TavorEVB Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -39,7 +56,7 @@ config MACH_TTC_DKB
 
 config MACH_BROWNSTONE
 	bool "Marvell's Brownstone Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -50,7 +67,7 @@ config MACH_BROWNSTONE
 
 config MACH_FLINT
 	bool "Marvell's Flint Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -61,7 +78,7 @@ config MACH_FLINT
 
 config MACH_MARVELL_JASPER
 	bool "Marvell's Jasper Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-base
@@ -72,6 +89,7 @@ config MACH_MARVELL_JASPER
 
 config MACH_TETON_BGA
 	bool "Marvell's PXA168 Teton BGA Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -79,14 +97,16 @@ config MACH_TETON_BGA
 
 config MACH_GPLUGD
 	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  GuruPlug Display (gplugD) Board
+endif
 
 config MACH_MMP_DT
 	bool "Support MMP (ARMv5) platforms from device tree"
-	select USE_OF
+	depends on ARCH_MULTI_V5
 	select PINCTRL
 	select PINCTRL_SINGLE
 	select COMMON_CLK
@@ -99,11 +119,9 @@ config MACH_MMP_DT
 
 config MACH_MMP2_DT
 	bool "Support MMP2 (ARMv7) platforms from device tree"
-	depends on !CPU_MOHAWK
-	select USE_OF
+	depends on ARCH_MULTI_V7
 	select PINCTRL
 	select PINCTRL_SINGLE
-	select COMMON_CLK
 	select ARCH_HAS_RESET_CONTROLLER
 	select CPU_PJ4
 	help
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 98f0f6388..7677ad541 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -1,6 +1,7 @@
 #
 # Makefile for Marvell's PXA168 processors line
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-pxa/include
 
 obj-y				+= common.o devices.o time.o
 
diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot
deleted file mode 100644
index 5edf03e2b..000000000
--- a/arch/arm/mach-mmp/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-   zreladdr-y	+= 0x00008000
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/addr-map.h
index f88a44c0e..2739d27bc 100644
--- a/arch/arm/mach-mmp/include/mach/addr-map.h
+++ b/arch/arm/mach-mmp/addr-map.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/addr-map.h
- *
  *   Common address map definitions
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 7e0248582..5db0edf71 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -22,14 +22,14 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
 #include <video/pxa168fb.h>
 #include <linux/input.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "irqs.h"
 #include "common.h"
 
 static unsigned long common_pin_config[] __initdata = {
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index a451a0f4d..3d2aea830 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -17,10 +17,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "irqs.h"
 
 
 #include "common.h"
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index ac25544b8..d1613b954 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
+#include "irqs.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c
index 53d77cbd6..835c3e7cc 100644
--- a/arch/arm/mach-mmp/clock-mmp2.c
+++ b/arch/arm/mach-mmp/clock-mmp2.c
@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -105,7 +106,8 @@ static struct clk_lookup mmp2_clkregs[] = {
 	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
 };
 
-void __init mmp2_clk_init(void)
+void __init mmp2_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			  phys_addr_t apbc_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
 }
diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c
index c572f219a..f726a3692 100644
--- a/arch/arm/mach-mmp/clock-pxa168.c
+++ b/arch/arm/mach-mmp/clock-pxa168.c
@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -85,7 +86,8 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
-void __init pxa168_clk_init(void)
+void __init pxa168_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
 }
diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c
index 379e1df61..bca60a224 100644
--- a/arch/arm/mach-mmp/clock-pxa910.c
+++ b/arch/arm/mach-mmp/clock-pxa910.c
@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -61,7 +62,8 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
-void __init pxa910_clk_init(void)
+void __init pxa910_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys, phys_addr_t apbcp_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
 }
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index 7c6f95f29..ac6633d0b 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -13,7 +13,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/regs-apbc.h>
+#include "regs-apbc.h"
 #include "clock.h"
 
 static void apbc_clk_enable(struct clk *clk)
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index 149b30cd1..819444518 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-mmp/clock.h
- *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index c03b4ab58..685a0993c 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -15,8 +15,8 @@
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
+#include "addr-map.h"
+#include "cputype.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index cf445bae6..7453a90c3 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -5,6 +5,3 @@ extern void timer_init(int irq);
 
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
-extern void __init pxa168_clk_init(void);
-extern void __init pxa910_clk_init(void);
-extern void __init mmp2_clk_init(void);
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/cputype.h
index 8a3b56dfd..8a3b56dfd 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/cputype.h
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 2bcb766af..3330ac7cf 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -12,10 +12,10 @@
 #include <linux/delay.h>
 
 #include <asm/irq.h>
-#include <mach/irqs.h>
-#include <mach/devices.h>
-#include <mach/cputype.h>
-#include <mach/regs-usb.h>
+#include "irqs.h"
+#include "devices.h"
+#include "cputype.h"
+#include "regs-usb.h"
 
 int __init pxa_register_device(struct pxa_device_desc *desc,
 				void *data, size_t size)
@@ -73,6 +73,8 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 }
 
 #if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
+#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 /*****************************************************************************
  * The registers read/write routines
@@ -112,9 +114,6 @@ static void u2o_write(void __iomem *base, unsigned int offset,
 	readl_relaxed(base + offset);
 }
 
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
-
-#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 static DEFINE_MUTEX(phy_lock);
 static int phy_init_cnt;
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/devices.h
index 21217ef11..21217ef11 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/devices.h
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index 6291c33d8..078b98034 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -21,10 +21,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
+#include "irqs.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 22762a1f9..c224119dc 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -16,9 +16,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/irqs.h>
-#include <mach/pxa168.h>
-#include <mach/mfp-pxa168.h>
+#include "irqs.h"
+#include "pxa168.h"
+#include "mfp-pxa168.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/include/mach/dma.h b/arch/arm/mach-mmp/include/mach/dma.h
deleted file mode 100644
index 1d6914544..000000000
--- a/arch/arm/mach-mmp/include/mach/dma.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/dma.h
- */
-
-#ifndef __ASM_MACH_DMA_H
-#define __ASM_MACH_DMA_H
-
-#include <mach/addr-map.h>
-
-#define DMAC_REGS_VIRT	(APB_VIRT_BASE + 0x00000)
-
-#include <plat/dma.h>
-#endif /* __ASM_MACH_DMA_H */
diff --git a/arch/arm/mach-mmp/include/mach/hardware.h b/arch/arm/mach-mmp/include/mach/hardware.h
deleted file mode 100644
index 99264a5ce..000000000
--- a/arch/arm/mach-mmp/include/mach/hardware.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_MACH_HARDWARE_H
-#define __ASM_MACH_HARDWARE_H
-
-#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-rtc.h b/arch/arm/mach-mmp/include/mach/regs-rtc.h
deleted file mode 100644
index 5bff886a3..000000000
--- a/arch/arm/mach-mmp/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __ASM_MACH_REGS_RTC_H
-#define __ASM_MACH_REGS_RTC_H
-
-#include <mach/addr-map.h>
-
-#define RTC_VIRT_BASE	(APB_VIRT_BASE + 0x10000)
-#define RTC_REG(x)	(*((volatile u32 __iomem *)(RTC_VIRT_BASE + (x))))
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		RTC_REG(0x00)	/* RTC Count Register */
-#define RTAR		RTC_REG(0x04)	/* RTC Alarm Register */
-#define RTSR		RTC_REG(0x08)	/* RTC Status Register */
-#define RTTR		RTC_REG(0x0C)	/* RTC Timer Trim Register */
-
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-smc.h b/arch/arm/mach-mmp/include/mach/regs-smc.h
deleted file mode 100644
index e484d40d7..000000000
--- a/arch/arm/mach-mmp/include/mach/regs-smc.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/regs-smc.h
- *
- *  Static Memory Controller Registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_REGS_SMC_H
-#define __ASM_MACH_REGS_SMC_H
-
-#include <mach/addr-map.h>
-
-#define SMC_VIRT_BASE		(AXI_VIRT_BASE + 0x83800)
-#define SMC_REG(x)		(SMC_VIRT_BASE + (x))
-
-#define SMC_MSC0		SMC_REG(0x0020)
-#define SMC_MSC1		SMC_REG(0x0024)
-#define SMC_SXCNFG0		SMC_REG(0x0030)
-#define SMC_SXCNFG1		SMC_REG(0x0034)
-#define SMC_MEMCLKCFG		SMC_REG(0x0068)
-#define SMC_CSDFICFG0		SMC_REG(0x0090)
-#define SMC_CSDFICFG1		SMC_REG(0x0094)
-#define SMC_CLK_RET_DEL		SMC_REG(0x00b0)
-#define SMC_ADV_RET_DEL		SMC_REG(0x00b4)
-#define SMC_CSADRMAP0		SMC_REG(0x00c0)
-#define SMC_CSADRMAP1		SMC_REG(0x00c4)
-#define SMC_WE_AP0		SMC_REG(0x00e0)
-#define SMC_WE_AP1		SMC_REG(0x00e4)
-#define SMC_OE_AP0		SMC_REG(0x00f0)
-#define SMC_OE_AP1		SMC_REG(0x00f4)
-#define SMC_ADV_AP0		SMC_REG(0x0100)
-#define SMC_ADV_AP1		SMC_REG(0x0104)
-
-#endif /* __ASM_MACH_REGS_SMC_H */
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
deleted file mode 100644
index 8890fa8fa..000000000
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/mach-mmp/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/addr-map.h>
-#include <asm/mach-types.h>
-
-#define UART1_BASE	(APB_PHYS_BASE + 0x36000)
-#define UART2_BASE	(APB_PHYS_BASE + 0x17000)
-#define UART3_BASE	(APB_PHYS_BASE + 0x18000)
-
-volatile unsigned long *UART;
-
-static inline void putc(char c)
-{
-	/* UART enabled? */
-	if (!(UART[UART_IER] & UART_IER_UUE))
-		return;
-
-	while (!(UART[UART_LSR] & UART_LSR_THRE))
-		barrier();
-
-	UART[UART_TX] = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* default to UART2 */
-	UART = (unsigned long *)UART2_BASE;
-
-	if (machine_is_avengers_lite())
-		UART = (unsigned long *)UART3_BASE;
-}
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/irqs.h
index fb492a50a..fb492a50a 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/irqs.h
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 0e9e5c05b..5dbb753a7 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -20,12 +20,12 @@
 #include <linux/mfd/max8925.h>
 #include <linux/interrupt.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/mfp-mmp2.h
index 4ad38629c..b27443497 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
+++ b/arch/arm/mach-mmp/mfp-mmp2.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_MFP_MMP2_H
 #define __ASM_MACH_MFP_MMP2_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x2 << 13)
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/mfp-pxa168.h
index 92aaa3c19..9050d0323 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/mfp-pxa168.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_MFP_PXA168_H
 #define __ASM_MACH_MFP_PXA168_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x1 << 13)
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/mfp-pxa910.h
index 8c78f2b16..f06db5cd3 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/mfp-pxa910.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_MFP_PXA910_H
 #define __ASM_MACH_MFP_PXA910_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x2 << 13)
diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/mfp.h
index 62e510e80..62e510e80 100644
--- a/arch/arm/mach-mmp/include/mach/mfp.h
+++ b/arch/arm/mach-mmp/mfp.h
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index b2296c930..6e155f03b 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -20,12 +20,12 @@
 
 extern void __init mmp_dt_init_timer(void);
 
-static const char *pxa168_dt_board_compat[] __initdata = {
+static const char *const pxa168_dt_board_compat[] __initconst = {
 	"mrvl,pxa168-aspenite",
 	NULL,
 };
 
-static const char *pxa910_dt_board_compat[] __initdata = {
+static const char *const pxa910_dt_board_compat[] __initconst = {
 	"mrvl,pxa910-dkb",
 	NULL,
 };
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 998c0f533..0341359b2 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -30,7 +30,7 @@ static void __init mmp_init_time(void)
 	of_clk_init(NULL);
 }
 
-static const char *mmp2_dt_board_compat[] __initdata = {
+static const char *const mmp2_dt_board_compat[] __initconst = {
 	"mrvl,mmp2-brownstone",
 	NULL,
 };
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index a70b5530b..afba5460c 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -9,6 +9,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/clk/mmp.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,15 +21,14 @@
 #include <asm/hardware/cache-tauros2.h>
 
 #include <asm/mach/time.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mfp.h>
-#include <mach/devices.h>
-#include <mach/mmp2.h>
-#include <mach/pm-mmp2.h>
+#include "addr-map.h"
+#include "regs-apbc.h"
+#include "cputype.h"
+#include "irqs.h"
+#include "mfp.h"
+#include "devices.h"
+#include "mmp2.h"
+#include "pm-mmp2.h"
 
 #include "common.h"
 
@@ -110,8 +110,9 @@ static int __init mmp2_init(void)
 #endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(mmp2_addr_map);
-		pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
-		mmp2_clk_init();
+		mmp2_clk_init(APB_PHYS_BASE + 0x50000,
+			      AXI_PHYS_BASE + 0x82800,
+			      APB_PHYS_BASE + 0x15000);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/mmp2.h
index 0764f4ece..9b5e75ee9 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/mmp2.h
@@ -10,9 +10,10 @@ extern void mmp2_clear_pmic_int(void);
 
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
 #include <linux/platform_data/dma-mmp_tdma.h>
 
+#include "devices.h"
+
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;
 extern struct pxa_device_desc mmp2_device_uart3;
diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c
index 43b1a5169..17699be3b 100644
--- a/arch/arm/mach-mmp/pm-mmp2.c
+++ b/arch/arm/mach-mmp/pm-mmp2.c
@@ -18,12 +18,12 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/addr-map.h>
-#include <mach/pm-mmp2.h>
-#include <mach/regs-icu.h>
-#include <mach/irqs.h>
+
+#include "cputype.h"
+#include "addr-map.h"
+#include "pm-mmp2.h"
+#include "regs-icu.h"
+#include "irqs.h"
 
 int mmp2_set_wake(struct irq_data *d, unsigned int on)
 {
diff --git a/arch/arm/mach-mmp/include/mach/pm-mmp2.h b/arch/arm/mach-mmp/pm-mmp2.h
index 98bd66ce8..486e0590c 100644
--- a/arch/arm/mach-mmp/include/mach/pm-mmp2.h
+++ b/arch/arm/mach-mmp/pm-mmp2.h
@@ -11,7 +11,7 @@
 #ifndef __MMP2_PM_H__
 #define __MMP2_PM_H__
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define APMU_PJ_IDLE_CFG			APMU_REG(0x018)
 #define APMU_PJ_IDLE_CFG_PJ_IDLE		(1 << 1)
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c
index 04c9daf9f..8b47600b3 100644
--- a/arch/arm/mach-mmp/pm-pxa910.c
+++ b/arch/arm/mach-mmp/pm-pxa910.c
@@ -18,12 +18,13 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/addr-map.h>
-#include <mach/pm-pxa910.h>
-#include <mach/regs-icu.h>
-#include <mach/irqs.h>
+#include <asm/outercache.h>
+
+#include "cputype.h"
+#include "addr-map.h"
+#include "pm-pxa910.h"
+#include "regs-icu.h"
+#include "irqs.h"
 
 int pxa910_set_wake(struct irq_data *data, unsigned int on)
 {
diff --git a/arch/arm/mach-mmp/include/mach/pm-pxa910.h b/arch/arm/mach-mmp/pm-pxa910.h
index 8cac8ab52..8cac8ab52 100644
--- a/arch/arm/mach-mmp/include/mach/pm-pxa910.h
+++ b/arch/arm/mach-mmp/pm-pxa910.h
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 144e99762..0f5f16fb8 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -13,25 +13,25 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/mv_usb.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
-#include <mach/cputype.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/devices.h>
-#include <mach/mfp.h>
-#include <linux/dma-mapping.h>
-#include <mach/pxa168.h>
-#include <mach/regs-usb.h>
 
-#include "common.h"
+#include "addr-map.h"
 #include "clock.h"
+#include "common.h"
+#include "cputype.h"
+#include "devices.h"
+#include "irqs.h"
+#include "mfp.h"
+#include "pxa168.h"
+#include "regs-apbc.h"
+#include "regs-apmu.h"
+#include "regs-usb.h"
 
 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
 
@@ -55,8 +55,9 @@ static int __init pxa168_init(void)
 	if (cpu_is_pxa168()) {
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa168_mfp_addr_map);
-		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
-		pxa168_clk_init();
+		pxa168_clk_init(APB_PHYS_BASE + 0x50000,
+				AXI_PHYS_BASE + 0x82800,
+				APB_PHYS_BASE + 0x15000);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/pxa168.h
index a83ba7cb5..75841e9cc 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/pxa168.h
@@ -11,14 +11,15 @@ extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/pxa168fb.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/cputype.h>
 #include <linux/pxa168_eth.h>
 #include <linux/platform_data/mv_usb.h>
 
+#include "devices.h"
+#include "cputype.h"
+
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
 extern struct pxa_device_desc pxa168_device_uart3;
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index eb57ee196..1ccbba9ac 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/clk/mmp.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -18,15 +19,14 @@
 
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/time.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mfp.h>
-#include <mach/devices.h>
-#include <mach/pm-pxa910.h>
-#include <mach/pxa910.h>
+#include "addr-map.h"
+#include "regs-apbc.h"
+#include "cputype.h"
+#include "irqs.h"
+#include "mfp.h"
+#include "devices.h"
+#include "pm-pxa910.h"
+#include "pxa910.h"
 
 #include "common.h"
 
@@ -96,8 +96,10 @@ static int __init pxa910_init(void)
 #endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa910_mfp_addr_map);
-		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
-		pxa910_clk_init();
+		pxa910_clk_init(APB_PHYS_BASE + 0x50000,
+				AXI_PHYS_BASE + 0x82800,
+				APB_PHYS_BASE + 0x15000,
+				APB_PHYS_BASE + 0x3b000);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/pxa910.h
index 92253203f..a211e81e5 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/pxa910.h
@@ -7,10 +7,11 @@ extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/mmp_disp.h>
 
+#include "devices.h"
+
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
 extern struct pxa_device_desc pxa910_device_twsi0;
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/regs-apbc.h
index ddc812f40..704bcae3f 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/regs-apbc.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
- *
  *   Application Peripheral Bus Clock Unit
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_REGS_APBC_H
 #define __ASM_MACH_REGS_APBC_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/regs-apmu.h
index 93c8d0e29..23f6209b6 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/regs-apmu.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
- *
  *   Application Subsystem Power Management Unit
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_REGS_APMU_H
 #define __ASM_MACH_REGS_APMU_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define APMU_FNCLK_EN	(1 << 4)
 #define APMU_AXICLK_EN	(1 << 3)
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h
index f882d9189..0328abe34 100644
--- a/arch/arm/mach-mmp/include/mach/regs-icu.h
+++ b/arch/arm/mach-mmp/regs-icu.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
- *
  *   Interrupt Control Unit
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_ICU_H
 #define __ASM_MACH_ICU_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
 #define ICU_REG(x)	(ICU_VIRT_BASE + (x))
diff --git a/arch/arm/mach-mmp/include/mach/regs-timers.h b/arch/arm/mach-mmp/regs-timers.h
index 45589fec9..d3611c0be 100644
--- a/arch/arm/mach-mmp/include/mach/regs-timers.h
+++ b/arch/arm/mach-mmp/regs-timers.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
- *
  *   Timers Module
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_REGS_TIMERS_H
 #define __ASM_MACH_REGS_TIMERS_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
 #define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)
diff --git a/arch/arm/mach-mmp/include/mach/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h
index b047bf487..b047bf487 100644
--- a/arch/arm/mach-mmp/include/mach/regs-usb.h
+++ b/arch/arm/mach-mmp/regs-usb.h
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index cdfc9bfee..efe35fade 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -16,10 +16,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa910.h>
-#include <mach/pxa910.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa910.h"
+#include "pxa910.h"
+#include "irqs.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index 6aa53fb29..cf038eb3b 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -23,11 +23,11 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/teton_bga.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "teton_bga.h"
+#include "irqs.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/include/mach/teton_bga.h b/arch/arm/mach-mmp/teton_bga.h
index 61a539b2c..019730f5a 100644
--- a/arch/arm/mach-mmp/include/mach/teton_bga.h
+++ b/arch/arm/mach-mmp/teton_bga.h
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-mmp/include/mach/teton_bga.h
- *
  *  Support for the Marvell PXA168 Teton BGA Development Platform.
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 10bfa03e5..3c2c92aaa 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -29,14 +29,13 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/sched_clock.h>
-
-#include <mach/addr-map.h>
-#include <mach/regs-timers.h>
-#include <mach/regs-apbc.h>
-#include <mach/irqs.h>
-#include <mach/cputype.h>
 #include <asm/mach/time.h>
 
+#include "addr-map.h"
+#include "regs-timers.h"
+#include "regs-apbc.h"
+#include "irqs.h"
+#include "cputype.h"
 #include "clock.h"
 
 #ifdef CONFIG_CPU_MMP2
@@ -124,32 +123,25 @@ static int timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *dev)
+static int timer_set_shutdown(struct clock_event_device *evt)
 {
 	unsigned long flags;
 
 	local_irq_save(flags);
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* disable the matching interrupt */
-		__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	}
+	/* disable the matching interrupt */
+	__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
 	local_irq_restore(flags);
+
+	return 0;
 }
 
 static struct clock_event_device ckevt = {
-	.name		= "clockevent",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= timer_set_next_event,
-	.set_mode	= timer_set_mode,
+	.name			= "clockevent",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_next_event		= timer_set_next_event,
+	.set_state_shutdown	= timer_set_shutdown,
+	.set_state_oneshot	= timer_set_shutdown,
 };
 
 static cycle_t clksrc_read(struct clocksource *cs)
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index ac4af81de..d90c74fa6 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -26,11 +26,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa910.h>
-#include <mach/pxa910.h>
-#include <mach/irqs.h>
-#include <mach/regs-usb.h>
+#include "addr-map.h"
+#include "mfp-pxa910.h"
+#include "pxa910.h"
+#include "irqs.h"
+#include "regs-usb.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index f49328c39..f69e28b85 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -1,10 +1,11 @@
 menuconfig ARCH_MOXART
-	bool "MOXA ART SoC" if ARCH_MULTI_V4
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
-	select CLKSRC_MMIO
+	select MOXART_TIMER
 	select GENERIC_IRQ_CHIP
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PHYLIB if NETDEVICES
 	help
 	  Say Y here if you want to run your kernel on hardware with a
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index f2d309d06..81c0f08a2 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -1,6 +1,16 @@
-if ARCH_MV78XX0
+menuconfig ARCH_MV78XX0
+	bool "Marvell MV78xx0"
+	depends on ARCH_MULTI_V5
+	select CPU_FEROCEON
+	select GPIOLIB
+	select MVEBU_MBUS
+	select PCI
+	select PLAT_ORION_LEGACY
+	help
+	  Support for the following Marvell MV78xx0 series SoCs:
+	  MV781x0, MV782x0.
 
-menu "Marvell MV78xx0 Implementations"
+if ARCH_MV78XX0
 
 config MACH_DB78X00_BP
 	bool "Marvell DB-78x00-BP Development Board"
@@ -20,6 +30,4 @@ config MACH_TERASTATION_WXL
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo WXL Nas.
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index 7cd04634d..ddb3aa98a 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
 obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot
deleted file mode 100644
index 760a0efe7..000000000
--- a/arch/arm/mach-mv78xx0/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/bridge-regs.h
index e20d6da23..2f54e1753 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/bridge-regs.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
- *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -9,7 +7,7 @@
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
 
-#include <mach/mv78xx0.h>
+#include "mv78xx0.h"
 
 #define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define L2_WRITETHROUGH		0x00020000
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 1f2ef98b3..e112f2e7c 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -17,9 +17,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
-#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include "mv78xx0.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -146,6 +146,7 @@ subsys_initcall(wxl_pci_init);
 MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
 	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
 	.init_machine	= wxl_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index e6ac679be..6af5430d0 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -18,13 +18,13 @@
 #include <asm/hardware/cache-feroceon-l2.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/mv78xx0.h>
-#include <mach/bridge-regs.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
+#include "mv78xx0.h"
+#include "bridge-regs.h"
 #include "common.h"
 
 static int get_tclk(void);
@@ -168,8 +168,7 @@ static struct clk *tclk;
 
 static void __init clk_init(void)
 {
-	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       get_tclk());
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, get_tclk());
 
 	orion_clkdev_init(tclk);
 }
@@ -344,7 +343,7 @@ void __init mv78xx0_init_early(void)
 				DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ);
 }
 
-void __init_refok mv78xx0_timer_init(void)
+void __ref mv78xx0_timer_init(void)
 {
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
 			IRQ_MV78XX0_TIMER_1, get_tclk());
@@ -405,9 +404,8 @@ void __init mv78xx0_init(void)
 	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
 	printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
 
-#ifdef CONFIG_CACHE_FEROCEON_L2
-	feroceon_l2_init(is_l2_writethrough());
-#endif
+	if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2))
+		feroceon_l2_init(is_l2_writethrough());
 
 	/* Setup root of clk tree */
 	clk_init();
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 4e0f22b30..cf16e08d4 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -15,9 +15,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
-#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include "mv78xx0.h"
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db78x00_ge00_data = {
@@ -94,6 +94,7 @@ subsys_initcall(db78x00_pci_init);
 MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
 	.init_machine	= db78x00_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
deleted file mode 100644
index 6b1f088e0..000000000
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no low interrupts set, check high interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	mov	\irqnr, #63
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no high interrupts set, check error interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_ERR_OFF]
-	mov	\irqnr, #95
-	ands	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-1001:	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h
deleted file mode 100644
index 67cab0a08..000000000
--- a/arch/arm/mach-mv78xx0/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/hardware.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mv78xx0.h"
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
deleted file mode 100644
index 6a761c44a..000000000
--- a/arch/arm/mach-mv78xx0/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/mv78xx0.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 320734440..788569e96 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,9 +11,10 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <mach/bridge-regs.h>
+#include <asm/exception.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
+#include "bridge-regs.h"
 #include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
@@ -23,12 +24,44 @@ static int __initdata gpio0_irqs[4] = {
 	IRQ_MV78XX0_GPIO_24_31,
 };
 
+static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE;
+
+static asmlinkage void
+__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF);
+	if (stat) {
+		unsigned int hwirq = __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF);
+	if (stat) {
+		unsigned int hwirq = 32 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF);
+	if (stat) {
+		unsigned int hwirq = 64 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+}
+
 void __init mv78xx0_init_irq(void)
 {
 	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 	orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
 
+	set_handle_irq(mv78xx0_legacy_handle_irq);
+
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
 	 * registers for core #1 are at an offset of 0x18 from those of
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/irqs.h
index fa1d42219..67e0fe730 100644
--- a/arch/arm/mach-mv78xx0/include/mach/irqs.h
+++ b/arch/arm/mach-mv78xx0/irqs.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-mv78xx0/include/mach/irqs.h
- *
  * IRQ definitions for Marvell MV78xx0 SoCs
  *
  * This file is licensed under the terms of the GNU General Public
@@ -88,7 +86,7 @@
 #define IRQ_MV78XX0_GPIO_START	96
 #define NR_GPIO_IRQS		32
 
-#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+#define MV78XX0_NR_IRQS		(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
 
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index df5034217..72843c02e 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <plat/mpp.h>
-#include <mach/hardware.h>
+#include "mv78xx0.h"
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h
index 723748d8b..2db1265ec 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/mv78xx0.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
- *
  * Generic definitions for Marvell MV78xx0 SoC flavors:
  *  MV781x0 and MV782x0.
  *
@@ -12,6 +10,8 @@
 #ifndef __ASM_ARCH_MV78XX0_H
 #define __ASM_ARCH_MV78XX0_H
 
+#include "irqs.h"
+
 /*
  * Marvell MV78xx0 address maps.
  *
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 097ea4cb1..13a7d72ee 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -15,7 +15,7 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
-#include <mach/mv78xx0.h>
+#include "mv78xx0.h"
 #include "common.h"
 
 #define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index d2d06f395..308ab71ec 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -14,9 +14,9 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
-#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include "mv78xx0.h"
 #include "common.h"
 
 static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
@@ -79,6 +79,7 @@ subsys_initcall(rd78x00_pci_init);
 MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
 	.init_machine	= rd78x00_masa_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 97473168d..541647f57 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,14 +1,14 @@
 menuconfig ARCH_MVEBU
-	bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
+	bool "Marvell Engineering Business Unit (MVEBU) SoCs"
+	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
 	select PINCTRL
 	select PLAT_ORION
 	select SOC_BUS
 	select MVEBU_MBUS
 	select ZONE_DMA if ARM_LPAE
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PCI_QUIRKS if PCI
 	select OF_ADDRESS_PCI
 
@@ -23,10 +23,13 @@ config MACH_MVEBU_V7
 	select CACHE_L2X0
 	select ARM_CPU_SUSPEND
 	select MACH_MVEBU_ANY
+	select MVEBU_CLK_COREDIV
 
 config MACH_ARMADA_370
-	bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 370 boards"
+	depends on ARCH_MULTI_V7
 	select ARMADA_370_CLK
+	select ARMADA_370_XP_IRQ
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_370
@@ -35,7 +38,9 @@ config MACH_ARMADA_370
 	  on the Marvell Armada 370 SoC with device tree.
 
 config MACH_ARMADA_375
-	bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 375 boards"
+	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
@@ -50,10 +55,12 @@ config MACH_ARMADA_375
 	  on the Marvell Armada 375 SoC with device tree.
 
 config MACH_ARMADA_38X
-	bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 380/385 boards"
+	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_38X_CLK
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
@@ -65,8 +72,10 @@ config MACH_ARMADA_38X
 	  on the Marvell Armada 380/385 SoC with device tree.
 
 config MACH_ARMADA_39X
-	bool "Marvell Armada 39x boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 39x boards"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_39X_CLK
 	select CACHE_L2X0
 	select HAVE_ARM_SCU
@@ -79,7 +88,9 @@ config MACH_ARMADA_39X
 	  on the Marvell Armada 39x SoC with device tree.
 
 config MACH_ARMADA_XP
-	bool "Marvell Armada XP boards" if ARCH_MULTI_V7
+	bool "Marvell Armada XP boards"
+	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARMADA_XP_CLK
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
@@ -89,22 +100,25 @@ config MACH_ARMADA_XP
 	  on the Marvell Armada XP SoC with device tree.
 
 config MACH_DOVE
-	bool "Marvell Dove boards" if ARCH_MULTI_V7
+	bool "Marvell Dove boards"
+	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select CPU_PJ4
 	select DOVE_CLK
 	select MACH_MVEBU_ANY
 	select ORION_IRQCHIP
 	select ORION_TIMER
+	select PM_GENERIC_DOMAINS if PM
 	select PINCTRL_DOVE
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Dove using flattened device tree.
 
 config MACH_KIRKWOOD
-	bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
+	bool "Marvell Kirkwood boards"
+	depends on ARCH_MULTI_V5
 	select CPU_FEROCEON
+	select GPIOLIB
 	select KIRKWOOD_CLK
 	select MACH_MVEBU_ANY
 	select ORION_IRQCHIP
@@ -116,11 +130,4 @@ config MACH_KIRKWOOD
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Kirkwood device tree.
 
-config MACH_NETXBIG
-	bool "LaCie 2Big and 5Big Network v2"
-	depends on MACH_KIRKWOOD
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie 2Big and 5Big Network v2
-
 endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index b4f01497c..6c6497e80 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,5 +1,4 @@
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-	-I$(srctree)/arch/arm/plat-orion/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
 
 AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
 CFLAGS_pmsu.o			:= -march=armv7-a
@@ -7,10 +6,15 @@ CFLAGS_pmsu.o			:= -march=armv7-a
 obj-$(CONFIG_MACH_MVEBU_ANY)	 += system-controller.o mvebu-soc-id.o
 
 ifeq ($(CONFIG_MACH_MVEBU_V7),y)
-obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o pm.o pm-board.o
+obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
+
+obj-$(CONFIG_PM)		 += pm.o pm-board.o
 obj-$(CONFIG_SMP)		 += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
 endif
 
 obj-$(CONFIG_MACH_DOVE)		 += dove.o
-obj-$(CONFIG_MACH_KIRKWOOD)	 += kirkwood.o kirkwood-pm.o
-obj-$(CONFIG_MACH_NETXBIG)	 += netxbig.o
+
+ifeq ($(CONFIG_MACH_KIRKWOOD),y)
+obj-y				 += kirkwood.o
+obj-$(CONFIG_PM)		 += kirkwood-pm.o
+endif
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index c55bbf81d..09413b678 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -17,7 +17,7 @@
 
 #ifdef CONFIG_SMP
 void armada_xp_secondary_startup(void);
-extern struct smp_operations armada_xp_smp_ops;
+extern const struct smp_operations armada_xp_smp_ops;
 #endif
 
 #endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index afee9083a..ccca95173 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -14,16 +14,13 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/clk-provider.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/io.h>
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/memblock.h>
 #include <linux/mbus.h>
-#include <linux/signal.h>
 #include <linux/slab.h>
 #include <linux/irqchip.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -106,27 +103,6 @@ static void __init mvebu_memblock_reserve(void)
 static void __init mvebu_memblock_reserve(void) {}
 #endif
 
-/*
- * Early versions of Armada 375 SoC have a bug where the BootROM
- * leaves an external data abort pending. The kernel is hit by this
- * data abort as soon as it enters userspace, because it unmasks the
- * data aborts at this moment. We register a custom abort handler
- * below to ignore the first data abort to work around this
- * problem.
- */
-static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
-					struct pt_regs *regs)
-{
-	static int ignore_first;
-
-	if (!ignore_first && fsr == 0x1406) {
-		ignore_first = 1;
-		return 0;
-	}
-
-	return 1;
-}
-
 static void __init mvebu_init_irq(void)
 {
 	irqchip_init();
@@ -135,17 +111,6 @@ static void __init mvebu_init_irq(void)
 	BUG_ON(mvebu_mbus_dt_init(coherency_available()));
 }
 
-static void __init external_abort_quirk(void)
-{
-	u32 dev, rev;
-
-	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
-		return;
-
-	hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
-			"imprecise external abort");
-}
-
 static void __init i2c_quirk(void)
 {
 	struct device_node *np;
@@ -178,10 +143,6 @@ static void __init mvebu_dt_init(void)
 {
 	if (of_machine_is_compatible("marvell,armadaxp"))
 		i2c_quirk();
-	if (of_machine_is_compatible("marvell,a375-db"))
-		external_abort_quirk();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const armada_370_xp_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
deleted file mode 100644
index 98e32cc2e..000000000
--- a/arch/arm/mach-mvebu/board.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Board functions for Marvell System On Chip
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_MVEBU_BOARD_H
-#define __ARCH_MVEBU_BOARD_H
-
-#ifdef CONFIG_MACH_NETXBIG
-void netxbig_init(void);
-#else
-static inline void netxbig_init(void) {};
-#endif
-#endif
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index e46e9ea1e..ae2a018b9 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -40,6 +40,7 @@
 unsigned long coherency_phys_base;
 void __iomem *coherency_base;
 static void __iomem *coherency_cpu_base;
+static void __iomem *cpu_config_base;
 
 /* Coherency fabric registers */
 #define IO_SYNC_BARRIER_CTL_OFFSET		   0x0
@@ -65,16 +66,29 @@ static const struct of_device_id of_coherency_table[] = {
 int ll_enable_coherency(void);
 void ll_add_cpu_to_smp_group(void);
 
-int set_cpu_coherent(void)
+#define CPU_CONFIG_SHARED_L2 BIT(16)
+
+/*
+ * Disable the "Shared L2 Present" bit in CPU Configuration register
+ * on Armada XP.
+ *
+ * The "Shared L2 Present" bit affects the "level of coherence" value
+ * in the clidr CP15 register.  Cache operation functions such as
+ * "flush all" and "invalidate all" operate on all the cache levels
+ * that included in the defined level of coherence. When HW I/O
+ * coherency is used, this bit causes unnecessary flushes of the L2
+ * cache.
+ */
+static void armada_xp_clear_shared_l2(void)
 {
-	if (!coherency_base) {
-		pr_warn("Can't make current CPU cache coherent.\n");
-		pr_warn("Coherency fabric is not initialized\n");
-		return 1;
-	}
+	u32 reg;
+
+	if (!cpu_config_base)
+		return;
 
-	ll_add_cpu_to_smp_group();
-	return ll_enable_coherency();
+	reg = readl(cpu_config_base);
+	reg &= ~CPU_CONFIG_SHARED_L2;
+	writel(reg, cpu_config_base);
 }
 
 static int mvebu_hwcc_notifier(struct notifier_block *nb,
@@ -93,13 +107,20 @@ static struct notifier_block mvebu_hwcc_nb = {
 	.notifier_call = mvebu_hwcc_notifier,
 };
 
-static struct notifier_block mvebu_hwcc_pci_nb = {
+static struct notifier_block mvebu_hwcc_pci_nb __maybe_unused = {
 	.notifier_call = mvebu_hwcc_notifier,
 };
 
+static int armada_xp_clear_l2_starting(unsigned int cpu)
+{
+	armada_xp_clear_shared_l2();
+	return 0;
+}
+
 static void __init armada_370_coherency_init(struct device_node *np)
 {
 	struct resource res;
+	struct device_node *cpu_config_np;
 
 	of_address_to_resource(np, 0, &res);
 	coherency_phys_base = res.start;
@@ -112,26 +133,38 @@ static void __init armada_370_coherency_init(struct device_node *np)
 	sync_cache_w(&coherency_phys_base);
 	coherency_base = of_iomap(np, 0);
 	coherency_cpu_base = of_iomap(np, 1);
+
+	cpu_config_np = of_find_compatible_node(NULL, NULL,
+						"marvell,armada-xp-cpu-config");
+	if (!cpu_config_np)
+		goto exit;
+
+	cpu_config_base = of_iomap(cpu_config_np, 0);
+	if (!cpu_config_base) {
+		of_node_put(cpu_config_np);
+		goto exit;
+	}
+
+	of_node_put(cpu_config_np);
+
+	cpuhp_setup_state_nocalls(CPUHP_AP_ARM_MVEBU_COHERENCY,
+				  "AP_ARM_MVEBU_COHERENCY",
+				  armada_xp_clear_l2_starting, NULL);
+exit:
 	set_cpu_coherent();
 }
 
 /*
- * This ioremap hook is used on Armada 375/38x to ensure that PCIe
- * memory areas are mapped as MT_UNCACHED instead of MT_DEVICE. This
- * is needed as a workaround for a deadlock issue between the PCIe
- * interface and the cache controller.
+ * This ioremap hook is used on Armada 375/38x to ensure that all MMIO
+ * areas are mapped as MT_UNCACHED instead of MT_DEVICE. This is
+ * needed for the HW I/O coherency mechanism to work properly without
+ * deadlock.
  */
 static void __iomem *
-armada_pcie_wa_ioremap_caller(phys_addr_t phys_addr, size_t size,
-			      unsigned int mtype, void *caller)
+armada_wa_ioremap_caller(phys_addr_t phys_addr, size_t size,
+			 unsigned int mtype, void *caller)
 {
-	struct resource pcie_mem;
-
-	mvebu_mbus_get_pcie_mem_aperture(&pcie_mem);
-
-	if (pcie_mem.start <= phys_addr && (phys_addr + size) <= pcie_mem.end)
-		mtype = MT_UNCACHED;
-
+	mtype = MT_UNCACHED;
 	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
 }
 
@@ -140,7 +173,8 @@ static void __init armada_375_380_coherency_init(struct device_node *np)
 	struct device_node *cache_dn;
 
 	coherency_cpu_base = of_iomap(np, 0);
-	arch_ioremap_caller = armada_pcie_wa_ioremap_caller;
+	arch_ioremap_caller = armada_wa_ioremap_caller;
+	pci_ioremap_set_mem_type(MT_UNCACHED);
 
 	/*
 	 * We should switch the PL310 to I/O coherency mode only if
@@ -206,6 +240,25 @@ static int coherency_type(void)
 	return type;
 }
 
+int set_cpu_coherent(void)
+{
+	int type = coherency_type();
+
+	if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) {
+		if (!coherency_base) {
+			pr_warn("Can't make current CPU cache coherent.\n");
+			pr_warn("Coherency fabric is not initialized\n");
+			return 1;
+		}
+
+		armada_xp_clear_shared_l2();
+		ll_add_cpu_to_smp_group();
+		return ll_enable_coherency();
+	}
+
+	return 0;
+}
+
 int coherency_available(void)
 {
 	return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h
index 54cb7607b..6067f1426 100644
--- a/arch/arm/mach-mvebu/coherency.h
+++ b/arch/arm/mach-mvebu/coherency.h
@@ -14,6 +14,7 @@
 #ifndef __MACH_370_XP_COHERENCY_H
 #define __MACH_370_XP_COHERENCY_H
 
+extern void __iomem *coherency_base;	/* for coherency_ll.S */
 extern unsigned long coherency_phys_base;
 int set_cpu_coherent(void);
 
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index 3e0aca1f2..6b775492c 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -25,6 +25,6 @@ int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev);
 
 void __iomem *mvebu_get_scu_base(void);
 
-int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd));
-
+int mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg,
+							u32 srcmd));
 #endif
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
index 4a2cadd6b..f33a31c6a 100644
--- a/arch/arm/mach-mvebu/cpu-reset.c
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -16,6 +16,8 @@
 #include <linux/io.h>
 #include <linux/resource.h>
 
+#include "common.h"
+
 static void __iomem *cpu_reset_base;
 static size_t cpu_reset_size;
 
diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c
index 5a1741500..d076c5771 100644
--- a/arch/arm/mach-mvebu/dove.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -11,7 +11,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/of.h>
-#include <linux/of_platform.h>
+#include <linux/soc/dove/pmu.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
 #include "common.h"
@@ -24,7 +24,7 @@ static void __init dove_init(void)
 	tauros2_init(0);
 #endif
 	BUG_ON(mvebu_mbus_dt_init(false));
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	dove_init_pmu();
 }
 
 static const char * const dove_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-mvebu/include/mach/gpio.h b/arch/arm/mach-mvebu/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f..000000000
--- a/arch/arm/mach-mvebu/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c
index cbb816f21..1e1f879f1 100644
--- a/arch/arm/mach-mvebu/kirkwood-pm.c
+++ b/arch/arm/mach-mvebu/kirkwood-pm.c
@@ -18,6 +18,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 #include "kirkwood.h"
+#include "kirkwood-pm.h"
 
 static void __iomem *ddr_operation_base;
 static void __iomem *memory_pm_ctrl;
@@ -66,11 +67,10 @@ static const struct platform_suspend_ops kirkwood_suspend_ops = {
 	.valid = kirkwood_pm_valid_standby,
 };
 
-int __init kirkwood_pm_init(void)
+void __init kirkwood_pm_init(void)
 {
 	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
 	memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
 
 	suspend_set_ops(&kirkwood_suspend_ops);
-	return 0;
 }
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 925f75f54..7d9f2fd9e 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -25,7 +25,6 @@
 #include "kirkwood.h"
 #include "kirkwood-pm.h"
 #include "common.h"
-#include "board.h"
 
 static struct resource kirkwood_cpufreq_resources[] = {
 	[0] = {
@@ -151,7 +150,7 @@ eth_fixup_skip:
  * causes mbus errors (which can occur for example for PCI aborts) to
  * throw CPU aborts, which we're not set up to deal with.
  */
-void kirkwood_disable_mbus_error_propagation(void)
+static void kirkwood_disable_mbus_error_propagation(void)
 {
 	void __iomem *cpu_config;
 
@@ -180,10 +179,7 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_pm_init();
 	kirkwood_dt_eth_fixup();
 
-	if (of_machine_is_compatible("lacie,netxbig"))
-		netxbig_init();
-
-	of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
+	of_platform_default_populate(NULL, auxdata, NULL);
 }
 
 static const char * const kirkwood_dt_board_compat[] __initconst = {
diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c
deleted file mode 100644
index 94b11b658..000000000
--- a/arch/arm/mach-mvebu/netxbig.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * arch/arm/mach-mvbu/board-netxbig.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
-#include "common.h"
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register    : bit [0-2] -> GPIO [44-46]
- * - enable register  : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
-	.addr		= netxbig_v2_gpio_ext_addr,
-	.num_addr	= ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
-	.data		= netxbig_v2_gpio_ext_data,
-	.num_data	= ARRAY_SIZE(netxbig_v2_gpio_ext_data),
-	.enable		= 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- *   0  | front LED
- *   1  | front LED brightness
- *   2  | SATA LED brightness
- *   3  | SATA0 LED
- *   4  | SATA1 LED
- *   5  | SATA2 LED
- *   6  | SATA3 LED
- *   7  | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- *   0  | min (off)
- *   -  | -
- *   7  | max
- *
- * data | front LED mode
- * -------------------------------------------------
- *   0  | fix off
- *   1  | fix blue on
- *   2  | fix red on
- *   3  | blink blue on=1 sec and blue off=1 sec
- *   4  | blink red on=1 sec and red off=1 sec
- *   5  | blink blue on=2.5 sec and red on=0.5 sec
- *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- *   0  | fix off
- *   1  | SATA activity blink
- *   2  | fix red on
- *   3  | blink blue on=1 sec and blue off=1 sec
- *   4  | blink red on=1 sec and red off=1 sec
- *   5  | blink blue on=2.5 sec and red on=0.5 sec
- *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 2,
-	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
-	[NETXBIG_LED_TIMER1]	= 4,
-	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 1,
-	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
-	[NETXBIG_LED_TIMER1]	= 3,
-	[NETXBIG_LED_TIMER2]	= 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 7,
-	[NETXBIG_LED_SATA]	= 1,
-	[NETXBIG_LED_TIMER1]	= 3,
-	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
-	[0] = {
-		.delay_on	= 500,
-		.delay_off	= 500,
-		.mode		= NETXBIG_LED_TIMER1,
-	},
-	[1] = {
-		.delay_on	= 500,
-		.delay_off	= 1000,
-		.mode		= NETXBIG_LED_TIMER2,
-	},
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr)			\
-	{ .name		= _name,				\
-	  .mode_addr	= maddr,				\
-	  .mode_val	= mval,					\
-	  .bright_addr	= baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
-	NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
-	NETXBIG_LED("net2big-v2:red:power",  0, netxbig_v2_red_mled,       1),
-	NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net2big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net2big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
-	.gpio_ext	= &netxbig_v2_gpio_ext,
-	.timer		= netxbig_v2_led_timer,
-	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
-	.leds		= net2big_v2_leds_ctrl,
-	.num_leds	= ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
-	NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
-	NETXBIG_LED("net5big-v2:red:power",  0, netxbig_v2_red_mled,       1),
-	NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata2",  5, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata3",  6, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata4",  7, netxbig_v2_red_mled,       2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
-	.gpio_ext	= &netxbig_v2_gpio_ext,
-	.timer		= netxbig_v2_led_timer,
-	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
-	.leds		= net5big_v2_leds_ctrl,
-	.num_leds	= ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
-	.name		= "leds-netxbig",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &net2big_v2_leds_data,
-	},
-};
-
-void __init netxbig_init(void)
-{
-
-	if (of_machine_is_compatible("lacie,net5big_v2"))
-		netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
-	platform_device_register(&netxbig_v2_leds);
-}
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index 3d5000481..d715dec1c 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -93,11 +93,11 @@ static int armada_38x_cpu_kill(unsigned int cpu)
 }
 #endif
 
-static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
+static const struct smp_operations mvebu_cortex_a9_smp_ops __initconst = {
 	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
 };
 
-static struct smp_operations armada_38x_smp_ops __initdata = {
+static const struct smp_operations armada_38x_smp_ops __initconst = {
 	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
 	.smp_secondary_init     = armada_38x_secondary_init,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 58cc8c157..46c742d3b 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -140,6 +140,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
 		panic("Cannot find 'marvell,bootrom' compatible node");
 
 	err = of_address_to_resource(node, 0, &res);
+	of_node_put(node);
 	if (err < 0)
 		panic("Cannot get 'bootrom' node address");
 
@@ -170,7 +171,7 @@ static int armada_xp_cpu_kill(unsigned int cpu)
 }
 #endif
 
-struct smp_operations armada_xp_smp_ops __initdata = {
+const struct smp_operations armada_xp_smp_ops __initconst = {
 	.smp_init_cpus		= armada_xp_smp_init_cpus,
 	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
 	.smp_boot_secondary	= armada_xp_boot_secondary,
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
index 301ab38d3..db17121d7 100644
--- a/arch/arm/mach-mvebu/pm-board.c
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -1,7 +1,7 @@
 /*
  * Board-level suspend/resume support.
  *
- * Copyright (C) 2014 Marvell
+ * Copyright (C) 2014-2015 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
@@ -20,27 +20,27 @@
 #include <linux/slab.h>
 #include "common.h"
 
-#define ARMADA_XP_GP_PIC_NR_GPIOS 3
+#define ARMADA_PIC_NR_GPIOS 3
 
 static void __iomem *gpio_ctrl;
-static int pic_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
-static int pic_raw_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
+static int pic_gpios[ARMADA_PIC_NR_GPIOS];
+static int pic_raw_gpios[ARMADA_PIC_NR_GPIOS];
 
-static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd)
+static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd)
 {
 	u32 reg, ackcmd;
 	int i;
 
 	/* Put 001 as value on the GPIOs */
 	reg = readl(gpio_ctrl);
-	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
+	for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++)
 		reg &= ~BIT(pic_raw_gpios[i]);
 	reg |= BIT(pic_raw_gpios[0]);
 	writel(reg, gpio_ctrl);
 
 	/* Prepare writing 111 to the GPIOs */
 	ackcmd = readl(gpio_ctrl);
-	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
+	for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++)
 		ackcmd |= BIT(pic_raw_gpios[i]);
 
 	srcmd = cpu_to_le32(srcmd);
@@ -76,7 +76,7 @@ static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd)
 		  [ackcmd] "r" (ackcmd), [gpio_ctrl] "r" (gpio_ctrl) : "r1");
 }
 
-static int mvebu_armada_xp_gp_pm_init(void)
+static int __init mvebu_armada_pm_init(void)
 {
 	struct device_node *np;
 	struct device_node *gpio_ctrl_np;
@@ -89,7 +89,7 @@ static int mvebu_armada_xp_gp_pm_init(void)
 	if (!np)
 		return -ENODEV;
 
-	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++) {
+	for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++) {
 		char *name;
 		struct of_phandle_args args;
 
@@ -134,11 +134,19 @@ static int mvebu_armada_xp_gp_pm_init(void)
 	if (!gpio_ctrl)
 		return -ENOMEM;
 
-	mvebu_pm_init(mvebu_armada_xp_gp_pm_enter);
+	mvebu_pm_suspend_init(mvebu_armada_pm_enter);
 
 out:
 	of_node_put(np);
 	return ret;
 }
 
-late_initcall(mvebu_armada_xp_gp_pm_init);
+/*
+ * Registering the mvebu_board_pm_enter callback must be done before
+ * the platform_suspend_ops will be registered. In the same time we
+ * also need to have the gpio devices registered. That's why we use a
+ * device_initcall_sync which is called after all the device_initcall
+ * (used by the gpio device) but before the late_initcall (used to
+ * register the platform_suspend_ops)
+ */
+device_initcall_sync(mvebu_armada_pm_init);
diff --git a/arch/arm/mach-mvebu/pm.c b/arch/arm/mach-mvebu/pm.c
index 6573a8f11..2990c5269 100644
--- a/arch/arm/mach-mvebu/pm.c
+++ b/arch/arm/mach-mvebu/pm.c
@@ -23,6 +23,7 @@
 #include <asm/suspend.h>
 
 #include "coherency.h"
+#include "common.h"
 #include "pmsu.h"
 
 #define SDRAM_CONFIG_OFFS                  0x0
@@ -105,12 +106,10 @@ static phys_addr_t mvebu_internal_reg_base(void)
 	return of_translate_address(np, in_addr);
 }
 
-static void mvebu_pm_store_bootinfo(void)
+static void mvebu_pm_store_armadaxp_bootinfo(u32 *store_addr)
 {
-	u32 *store_addr;
 	phys_addr_t resume_pc;
 
-	store_addr = phys_to_virt(BOOT_INFO_ADDR);
 	resume_pc = virt_to_phys(armada_370_xp_cpu_resume);
 
 	/*
@@ -151,14 +150,30 @@ static void mvebu_pm_store_bootinfo(void)
 	writel(BOOT_MAGIC_LIST_END, store_addr);
 }
 
-static int mvebu_pm_enter(suspend_state_t state)
+static int mvebu_pm_store_bootinfo(void)
 {
-	if (state != PM_SUSPEND_MEM)
-		return -EINVAL;
+	u32 *store_addr;
+
+	store_addr = phys_to_virt(BOOT_INFO_ADDR);
+
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		mvebu_pm_store_armadaxp_bootinfo(store_addr);
+	else
+		return -ENODEV;
+
+	return 0;
+}
+
+static int mvebu_enter_suspend(void)
+{
+	int ret;
+
+	ret = mvebu_pm_store_bootinfo();
+	if (ret)
+		return ret;
 
 	cpu_pm_enter();
 
-	mvebu_pm_store_bootinfo();
 	cpu_suspend(0, mvebu_pm_powerdown);
 
 	outer_resume();
@@ -168,23 +183,62 @@ static int mvebu_pm_enter(suspend_state_t state)
 	set_cpu_coherent();
 
 	cpu_pm_exit();
+	return 0;
+}
+
+static int mvebu_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		cpu_do_idle();
+		break;
+	case PM_SUSPEND_MEM:
+		pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n");
+		return mvebu_enter_suspend();
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int mvebu_pm_valid(suspend_state_t state)
+{
+	if (state == PM_SUSPEND_STANDBY)
+		return 1;
+
+	if (state == PM_SUSPEND_MEM && mvebu_board_pm_enter != NULL)
+		return 1;
 
 	return 0;
 }
 
 static const struct platform_suspend_ops mvebu_pm_ops = {
 	.enter = mvebu_pm_enter,
-	.valid = suspend_valid_only_mem,
+	.valid = mvebu_pm_valid,
 };
 
-int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd))
+static int __init mvebu_pm_init(void)
+{
+	if (!of_machine_is_compatible("marvell,armadaxp") &&
+	    !of_machine_is_compatible("marvell,armada370") &&
+	    !of_machine_is_compatible("marvell,armada380") &&
+	    !of_machine_is_compatible("marvell,armada390"))
+		return -ENODEV;
+
+	suspend_set_ops(&mvebu_pm_ops);
+
+	return 0;
+}
+
+
+late_initcall(mvebu_pm_init);
+
+int __init mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg,
+							u32 srcmd))
 {
 	struct device_node *np;
 	struct resource res;
 
-	if (!of_machine_is_compatible("marvell,armadaxp"))
-		return -ENODEV;
-
 	np = of_find_compatible_node(NULL, NULL,
 				     "marvell,armada-xp-sdram-controller");
 	if (!np)
@@ -212,7 +266,5 @@ int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd))
 
 	mvebu_board_pm_enter = board_pm_enter;
 
-	suspend_set_ops(&mvebu_pm_ops);
-
 	return 0;
 }
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 4f4e22206..f39bd51bc 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -20,16 +20,15 @@
 
 #include <linux/clk.h>
 #include <linux/cpu_pm.h>
-#include <linux/cpufreq-dt.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/mbus.h>
+#include <linux/mvebu-pmsu.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
-#include <linux/pm_opp.h>
 #include <linux/resource.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
@@ -40,7 +39,7 @@
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
 #include "common.h"
-
+#include "pmsu.h"
 
 #define PMSU_BASE_OFFSET    0x100
 #define PMSU_REG_SIZE	    0x1000
@@ -296,11 +295,11 @@ int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
 	/* Test the CR_C bit and set it if it was cleared */
 	asm volatile(
 	"mrc	p15, 0, r0, c1, c0, 0 \n\t"
-	"tst	r0, #(1 << 2) \n\t"
+	"tst	r0, %0 \n\t"
 	"orreq	r0, r0, #(1 << 2) \n\t"
 	"mcreq	p15, 0, r0, c1, c0, 0 \n\t"
 	"isb	"
-	: : : "r0");
+	: : "Ir" (CR_C) : "r0");
 
 	pr_debug("Failed to suspend the system\n");
 
@@ -379,6 +378,16 @@ static struct notifier_block mvebu_v7_cpu_pm_notifier = {
 
 static struct platform_device mvebu_v7_cpuidle_device;
 
+static int broken_idle(struct device_node *np)
+{
+	if (of_property_read_bool(np, "broken-idle")) {
+		pr_warn("CPU idle is currently broken: disabling\n");
+		return 1;
+	}
+
+	return 0;
+}
+
 static __init int armada_370_cpuidle_init(void)
 {
 	struct device_node *np;
@@ -387,7 +396,9 @@ static __init int armada_370_cpuidle_init(void)
 	np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
 	if (!np)
 		return -ENODEV;
-	of_node_put(np);
+
+	if (broken_idle(np))
+		goto end;
 
 	/*
 	 * On Armada 370, there is "a slow exit process from the deep
@@ -406,6 +417,8 @@ static __init int armada_370_cpuidle_init(void)
 	mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
 	mvebu_v7_cpuidle_device.name = "cpuidle-armada-370";
 
+end:
+	of_node_put(np);
 	return 0;
 }
 
@@ -415,13 +428,17 @@ static __init int armada_38x_cpuidle_init(void)
 	void __iomem *mpsoc_base;
 	u32 reg;
 
-	pr_warn("CPU idle is currently broken on Armada 38x: disabling");
+	pr_warn("CPU idle is currently broken on Armada 38x: disabling\n");
 	return 0;
 
 	np = of_find_compatible_node(NULL, NULL,
 				     "marvell,armada-380-coherency-fabric");
 	if (!np)
 		return -ENODEV;
+
+	if (broken_idle(np))
+		goto end;
+
 	of_node_put(np);
 
 	np = of_find_compatible_node(NULL, NULL,
@@ -430,7 +447,6 @@ static __init int armada_38x_cpuidle_init(void)
 		return -ENODEV;
 	mpsoc_base = of_iomap(np, 0);
 	BUG_ON(!mpsoc_base);
-	of_node_put(np);
 
 	/* Set up reset mask when powering down the cpus */
 	reg = readl(mpsoc_base + MPCORE_RESET_CTL);
@@ -450,6 +466,8 @@ static __init int armada_38x_cpuidle_init(void)
 	mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend;
 	mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x";
 
+end:
+	of_node_put(np);
 	return 0;
 }
 
@@ -460,12 +478,16 @@ static __init int armada_xp_cpuidle_init(void)
 	np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
 	if (!np)
 		return -ENODEV;
-	of_node_put(np);
+
+	if (broken_idle(np))
+		goto end;
 
 	mvebu_cpu_resume = armada_370_xp_cpu_resume;
 	mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
 	mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp";
 
+end:
+	of_node_put(np);
 	return 0;
 }
 
@@ -486,7 +508,7 @@ static int __init mvebu_v7_cpu_pm_init(void)
 	 */
 	if (of_machine_is_compatible("marvell,armada380")) {
 		cpu_hotplug_disable();
-		pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling");
+		pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling\n");
 	}
 
 	if (of_machine_is_compatible("marvell,armadaxp"))
@@ -585,86 +607,3 @@ int mvebu_pmsu_dfs_request(int cpu)
 
 	return 0;
 }
-
-struct cpufreq_dt_platform_data cpufreq_dt_pd = {
-	.independent_clocks = true,
-};
-
-static int __init armada_xp_pmsu_cpufreq_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	int ret, cpu;
-
-	if (!of_machine_is_compatible("marvell,armadaxp"))
-		return 0;
-
-	/*
-	 * In order to have proper cpufreq handling, we need to ensure
-	 * that the Device Tree description of the CPU clock includes
-	 * the definition of the PMU DFS registers. If not, we do not
-	 * register the clock notifier and the cpufreq driver. This
-	 * piece of code is only for compatibility with old Device
-	 * Trees.
-	 */
-	np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
-	if (!np)
-		return 0;
-
-	ret = of_address_to_resource(np, 1, &res);
-	if (ret) {
-		pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
-		of_node_put(np);
-		return 0;
-	}
-
-	of_node_put(np);
-
-	/*
-	 * For each CPU, this loop registers the operating points
-	 * supported (which are the nominal CPU frequency and half of
-	 * it), and registers the clock notifier that will take care
-	 * of doing the PMSU part of a frequency transition.
-	 */
-	for_each_possible_cpu(cpu) {
-		struct device *cpu_dev;
-		struct clk *clk;
-		int ret;
-
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("Cannot get CPU %d\n", cpu);
-			continue;
-		}
-
-		clk = clk_get(cpu_dev, 0);
-		if (IS_ERR(clk)) {
-			pr_err("Cannot get clock for CPU %d\n", cpu);
-			return PTR_ERR(clk);
-		}
-
-		/*
-		 * In case of a failure of dev_pm_opp_add(), we don't
-		 * bother with cleaning up the registered OPP (there's
-		 * no function to do so), and simply cancel the
-		 * registration of the cpufreq device.
-		 */
-		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
-		if (ret) {
-			clk_put(clk);
-			return ret;
-		}
-
-		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
-		if (ret) {
-			clk_put(clk);
-			return ret;
-		}
-	}
-
-	platform_device_register_data(NULL, "cpufreq-dt", -1,
-				      &cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
-	return 0;
-}
-
-device_initcall(armada_xp_pmsu_cpufreq_init);
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index c6c132acd..76cbc82a7 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -127,7 +127,7 @@ int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev)
 }
 
 #if defined(CONFIG_SMP) && defined(CONFIG_MACH_MVEBU_V7)
-void mvebu_armada375_smp_wa_init(void)
+static void mvebu_armada375_smp_wa_init(void)
 {
 	u32 dev, rev;
 	phys_addr_t resume_addr_reg;
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 84794137b..cb429bc6d 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -15,8 +15,8 @@ config SOC_IMX28
 config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_MMIO
+	select GPIOLIB
+	select MXS_TIMER
 	select PINCTRL
 	select SOC_BUS
 	select SOC_IMX23
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 2e7cec86e..0b7fe74ff 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -282,7 +282,7 @@ static void __init apx4devkit_init(void)
 #define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
 #define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)
 
-static const struct gpio tx28_gpios[] __initconst = {
+static const struct gpio const tx28_gpios[] __initconst = {
 	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
 	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
 	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
@@ -498,8 +498,7 @@ static void __init mxs_machine_init(void)
 	else if (of_machine_is_compatible("msr,m28cu3"))
 		m28cu3_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	mxs_restart_init();
 
@@ -528,7 +527,7 @@ static void mxs_restart(enum reboot_mode mode, const char *cmd)
 	soft_restart(0);
 }
 
-static const char *mxs_dt_compat[] __initdata = {
+static const char *const mxs_dt_compat[] __initconst = {
 	"fsl,imx28",
 	"fsl,imx23",
 	NULL,
diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig
index 3d90ef19b..2da8e5dfc 100644
--- a/arch/arm/mach-netx/Kconfig
+++ b/arch/arm/mach-netx/Kconfig
@@ -3,20 +3,17 @@ menu "NetX Implementations"
 
 config MACH_NXDKN
 	bool "Enable Hilscher nxdkn Eval Board support"
-	depends on ARCH_NETX
 	help
 	  Board support for the Hilscher NetX Eval Board
 
 config MACH_NXDB500
 	bool "Enable Hilscher nxdb500 Eval Board support"
-	depends on ARCH_NETX
 	select ARM_AMBA
 	help
 	  Board support for the Hilscher nxdb500 Eval Board
 
 config MACH_NXEB500HMI
 	bool "Enable Hilscher nxeb500hmi Eval Board support"
-	depends on ARCH_NETX
 	select ARM_AMBA
 	help
 	  Board support for the Hilscher nxeb500hmi Eval Board
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index d122ee6ab..8814ee5e9 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -42,8 +42,8 @@ int netx_clcd_setup(struct clcd_fb *fb)
 
 	fb->panel = netx_panel;
 
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, 1024*1024,
-						    &dma, GFP_KERNEL);
+	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma,
+					  GFP_KERNEL);
 	if (!fb->fb.screen_base) {
 		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 		return -ENOMEM;
@@ -57,16 +57,14 @@ int netx_clcd_setup(struct clcd_fb *fb)
 
 int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 {
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-				     fb->fb.screen_base,
-				     fb->fb.fix.smem_start,
-				     fb->fb.fix.smem_len);
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 }
 
 void netx_clcd_remove(struct clcd_fb *fb)
 {
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-			      fb->fb.screen_base, fb->fb.fix.smem_start);
+	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
+		    fb->fb.fix.smem_start);
 }
 
 static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index db25b0cef..842302df9 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -69,8 +69,7 @@ static struct platform_device *devices[] __initdata = {
 #define DEBUG_IRQ(fmt...)	while (0) {}
 #endif
 
-static void
-netx_hif_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
+static void netx_hif_demux_handler(struct irq_desc *desc)
 {
 	unsigned int irq = NETX_IRQ_HIF_CHAINED(0);
 	unsigned int stat;
@@ -174,7 +173,7 @@ void __init netx_init_irq(void)
 	for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
 		irq_set_chip_and_handler(irq, &netx_hif_chip,
 					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST);
 	}
 
 	writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN);
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
index 5cb1051b5..033875dbc 100644
--- a/arch/arm/mach-netx/include/mach/uncompress.h
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -40,7 +40,7 @@
 #define FR_BUSY (1<<3)
 #define FR_TXFF (1<<5)
 
-static void putc(char c)
+static inline void putc(char c)
 {
 	unsigned long base;
 
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 5fb2a590e..054a8a61e 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -34,40 +34,40 @@
 #define TIMER_CLOCKEVENT 0
 #define TIMER_CLOCKSOURCE 1
 
-static void netx_set_mode(enum clock_event_mode mode,
-		struct clock_event_device *clk)
+static inline void timer_shutdown(struct clock_event_device *evt)
 {
-	u32 tmode;
-
 	/* disable timer */
 	writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
+}
+
+static int netx_shutdown(struct clock_event_device *evt)
+{
+	timer_shutdown(evt);
+
+	return 0;
+}
+
+static int netx_set_oneshot(struct clock_event_device *evt)
+{
+	u32 tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
+
+	timer_shutdown(evt);
+	writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
+	writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
-		tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
-			NETX_GPIO_COUNTER_CTRL_IRQ_EN |
-			NETX_GPIO_COUNTER_CTRL_RUN;
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
-		tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN |
-			NETX_GPIO_COUNTER_CTRL_RUN;
-		break;
-
-	default:
-		WARN(1, "%s: unhandled mode %d\n", __func__, mode);
-		/* fall through */
-
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		tmode = 0;
-		break;
-	}
+	return 0;
+}
 
+static int netx_set_periodic(struct clock_event_device *evt)
+{
+	u32 tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
+		    NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
+
+	timer_shutdown(evt);
+	writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
 	writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
+
+	return 0;
 }
 
 static int netx_set_next_event(unsigned long evt,
@@ -81,7 +81,10 @@ static struct clock_event_device netx_clockevent = {
 	.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_next_event = netx_set_next_event,
-	.set_mode = netx_set_mode,
+	.set_state_shutdown = netx_shutdown,
+	.set_state_periodic = netx_set_periodic,
+	.set_state_oneshot = netx_set_oneshot,
+	.tick_resume = netx_shutdown,
 };
 
 /*
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 3c61096c8..b7e9801fd 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -1,12 +1,12 @@
 menuconfig ARCH_NOMADIK
 	bool "ST-Ericsson Nomadik"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_NOMADIK_MTU
 	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	select CPU_ARM926T
+	select GPIOLIB
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 9bda46f1f..0c612d95b 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -26,10 +26,8 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 #include <linux/of_irq.h>
-#include <linux/of_gpio.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -109,40 +107,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd)
 	writel(1, srcbase + 0x18);
 }
 
-/*
- * This GPIO pin turns on a line that is used to detect card insertion
- * on this board.
- */
-static int __init cpu8815_mmcsd_init(void)
-{
-	struct device_node *cdbias;
-	int gpio, err;
-
-	cdbias = of_find_node_by_path("/usb-s8815/mmcsd-gpio");
-	if (!cdbias) {
-		pr_info("could not find MMC/SD card detect bias node\n");
-		return 0;
-	}
-	gpio = of_get_gpio(cdbias, 0);
-	if (gpio < 0) {
-		pr_info("could not obtain MMC/SD card detect bias GPIO\n");
-		return 0;
-	}
-	err = gpio_request(gpio, "card detect bias");
-	if (err) {
-		pr_info("failed to request card detect bias GPIO %d\n", gpio);
-		return -ENODEV;
-	}
-	err = gpio_direction_output(gpio, 0);
-	if (err){
-		pr_info("failed to set GPIO %d as output, low\n", gpio);
-		return err;
-	}
-	pr_info("enabled USB-S8815 CD bias GPIO %d, low\n", gpio);
-	return 0;
-}
-device_initcall(cpu8815_mmcsd_init);
-
 static const char * cpu8815_board_compat[] = {
 	"st,nomadik-nhk-15",
 	"calaosystems,usb-s8815",
@@ -150,9 +114,8 @@ static const char * cpu8815_board_compat[] = {
 };
 
 DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
-	/* At full speed latency must be >=2, so 0x249 in low bits */
-	.l2c_aux_val	= 0x00700249,
-	.l2c_aux_mask	= 0xfe0fefff,
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.map_io		= cpu8815_map_io,
 	.restart	= cpu8815_restart,
 	.dt_compat      = cpu8815_board_compat,
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
index bc41f26c1..d4985305c 100644
--- a/arch/arm/mach-nspire/Kconfig
+++ b/arch/arm/mach-nspire/Kconfig
@@ -7,5 +7,6 @@ config ARCH_NSPIRE
 	select ARM_AMBA
 	select ARM_VIC
 	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
 	help
 	  This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot
deleted file mode 100644
index e69de29bb..000000000
--- a/arch/arm/mach-nspire/Makefile.boot
+++ /dev/null
diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c
index abea12617..ea0e5b2ca 100644
--- a/arch/arm/mach-nspire/clcd.c
+++ b/arch/arm/mach-nspire/clcd.c
@@ -90,8 +90,8 @@ int nspire_clcd_setup(struct clcd_fb *fb)
 	panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8;
 	panel_size = ALIGN(panel_size, PAGE_SIZE);
 
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
-		panel_size, &dma, GFP_KERNEL);
+	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, panel_size, &dma,
+					  GFP_KERNEL);
 
 	if (!fb->fb.screen_base) {
 		pr_err("CLCD: unable to map framebuffer\n");
@@ -107,13 +107,12 @@ int nspire_clcd_setup(struct clcd_fb *fb)
 
 int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 {
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-		fb->fb.screen_base, fb->fb.fix.smem_start,
-		fb->fb.fix.smem_len);
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 }
 
 void nspire_clcd_remove(struct clcd_fb *fb)
 {
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-		fb->fb.screen_base, fb->fb.fix.smem_start);
+	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
+		    fb->fb.fix.smem_start);
 }
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index 34c2a1b32..f0808fcc5 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -57,8 +57,7 @@ static struct of_dev_auxdata nspire_auxdata[] __initdata = {
 
 static void __init nspire_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-			nspire_auxdata, NULL);
+	of_platform_default_populate(NULL, nspire_auxdata, NULL);
 }
 
 static void nspire_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cdd05f2e6..afb809509 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -90,13 +90,6 @@ config MACH_OMAP_FSAMPLE
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
 
-config MACH_VOICEBLUE
-	bool "Voiceblue"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	help
-	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
-	  such a board.
-
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 3889b6cd2..0e8ea95ea 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
 					   board-nand.o
-obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
 obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 5d7fb596b..bf608441b 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -43,8 +43,8 @@
 #define OTHERS_MASK			(MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
 
 /* IRQ handler register bitmasks */
-#define DEFERRED_FIQ_MASK		(0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
-#define GPIO_BANK1_MASK  		(0x1 << INT_GPIO_BANK1)
+#define DEFERRED_FIQ_MASK		OMAP_IRQ_BIT(INT_DEFERRED_FIQ)
+#define GPIO_BANK1_MASK  		OMAP_IRQ_BIT(INT_GPIO_BANK1)
 
 /* Driver buffer byte offsets */
 #define BUF_MASK			(FIQ_MASK * 4)
@@ -110,7 +110,7 @@ ENTRY(qwerty_fiqin_start)
 	mov r8, #2				@ reset FIQ agreement
 	str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
 
-	cmp r10, #INT_GPIO_BANK1		@ is it GPIO bank interrupt?
+	cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY)	@ is it GPIO interrupt?
 	beq gpio				@ yes - process it
 
 	mov r8, #1
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index d1f12095f..793a24a53 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -109,7 +109,8 @@ void __init ams_delta_init_fiq(void)
 	 * Since no set_type() method is provided by OMAP irq chip,
 	 * switch to edge triggered interrupt type manually.
 	 */
-	offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
+	offset = IRQ_ILR0_REG_OFFSET +
+			((INT_DEFERRED_FIQ - NR_IRQS_LEGACY) & 0x1f) * 0x4;
 	val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
 	omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
 
@@ -136,7 +137,7 @@ void __init ams_delta_init_fiq(void)
 		fiq_buffer[i] = 0;
 
 	/*
-	 * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr
+	 * FIQ mode r9 always points to the fiq_buffer, because the FIQ isr
 	 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
 	 * only means of communication with the IRQ level and other kernel
 	 * context code.
@@ -149,7 +150,7 @@ void __init ams_delta_init_fiq(void)
 	/*
 	 * Redirect GPIO interrupts to FIQ
 	 */
-	offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
+	offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4;
 	val = omap_readl(OMAP_IH1_BASE + offset) | 1;
 	omap_writel(val, OMAP_IH1_BASE + offset);
 }
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index a95499ea8..6613a6ff5 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,7 +11,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -41,7 +41,7 @@
 
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
-#include <mach/camera.h>
+#include "camera.h"
 #include <mach/usb.h>
 
 #include "iomap.h"
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 0fb51d22c..fad95b74b 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -29,7 +29,7 @@
 
 #include <mach/tc.h>
 #include <mach/mux.h>
-#include <mach/flash.h>
+#include "flash.h"
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 8340d684d..cd146ed05 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -42,7 +42,7 @@
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <mach/flash.h>
+#include "flash.h"
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 086ff34e0..f7c8c63dd 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -44,7 +44,7 @@
 #include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <linux/omap-dma.h>
-#include <mach/flash.h>
+#include "flash.h"
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index ed4e045c2..ae90bd02b 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
 
diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c
index 4d0835327..7684f9203 100644
--- a/arch/arm/mach-omap1/board-nand.c
+++ b/arch/arm/mach-omap1/board-nand.c
@@ -22,7 +22,7 @@
 
 void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	unsigned long mask;
 
 	if (cmd == NAND_CMD_NONE)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 0efd165b8..4dfb99504 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -46,7 +46,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <mach/tc.h>
 
@@ -172,7 +172,7 @@ static struct gpio_led tps_leds[] = {
 	 * Also, D9 requires non-battery power.
 	 */
 	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
-			.default_trigger = "ide-disk", },
+			.default_trigger = "disk-activity", },
 	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
 	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
 			.default_trigger = "heartbeat", },
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 1142ae431..e5288cda1 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -34,7 +34,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <mach/tc.h>
 #include <linux/omap-dma.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 54a547a96..d672495f7 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -34,7 +34,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 87ec04ae4..aaf741b0a 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -36,7 +36,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 3d76f0540..150b57ba4 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -30,7 +30,7 @@
 
 #include <mach/tc.h>
 #include <mach/mux.h>
-#include <mach/flash.h>
+#include "flash.h"
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 4fcf19c78..a9373570b 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <mach/board-sx1.h>
+#include "board-sx1.h"
 
 #include "mmc.h"
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 939991ea3..6c482254b 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -34,11 +34,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
-#include <mach/board-sx1.h>
+#include "board-sx1.h"
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/include/mach/board-sx1.h b/arch/arm/mach-omap1/board-sx1.h
index 355adbdaa..355adbdaa 100644
--- a/arch/arm/mach-omap1/include/mach/board-sx1.h
+++ b/arch/arm/mach-omap1/board-sx1.h
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
deleted file mode 100644
index e960687d0..000000000
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-voiceblue.c
- *
- * Modified from board-generic.c
- *
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mtd/physmap.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/smc91x.h>
-#include <linux/export.h>
-#include <linux/reboot.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-voiceblue.h>
-#include <mach/flash.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "common.h"
-
-static struct plat_serial8250_port voiceblue_ports[] = {
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x50000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x60000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x70000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM1,
-};
-
-static int __init ext_uart_init(void)
-{
-	if (!machine_is_voiceblue())
-		return -ENODEV;
-
-	voiceblue_ports[0].irq = gpio_to_irq(12);
-	voiceblue_ports[1].irq = gpio_to_irq(13);
-	voiceblue_ports[2].irq = gpio_to_irq(14);
-	voiceblue_ports[3].irq = gpio_to_irq(15);
-	serial_device.dev.platform_data = voiceblue_ports;
-	return platform_device_register(&serial_device);
-}
-arch_initcall(ext_uart_init);
-
-static struct physmap_flash_data voiceblue_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-};
-
-static struct resource voiceblue_flash_resource = {
-	.start	= OMAP_CS0_PHYS,
-	.end	= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device voiceblue_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &voiceblue_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &voiceblue_flash_resource,
-};
-
-static struct smc91x_platdata voiceblue_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource voiceblue_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP_CS2_PHYS + 0x300,
-		.end	= OMAP_CS2_PHYS + 0x300 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device voiceblue_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &voiceblue_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
-	.resource	= voiceblue_smc91x_resources,
-};
-
-static struct platform_device *voiceblue_devices[] __initdata = {
-	&voiceblue_flash_device,
-	&voiceblue_smc91x_device,
-};
-
-static struct omap_usb_config voiceblue_usb_config __initdata = {
-	.hmc_mode	= 3,
-	.register_host	= 1,
-	.register_dev   = 1,
-	.pins[0]	= 2,
-	.pins[1]	= 6,
-	.pins[2]	= 6,
-};
-
-#define MACHINE_PANICED		1
-#define MACHINE_REBOOTING	2
-#define MACHINE_REBOOT		4
-static unsigned long machine_state;
-
-static int panic_event(struct notifier_block *this, unsigned long event,
-	 void *ptr)
-{
-	if (test_and_set_bit(MACHINE_PANICED, &machine_state))
-		return NOTIFY_DONE;
-
-	/* Flash power LED */
-	omap_writeb(0x78, OMAP_LPG1_LCR);
-	omap_writeb(0x01, OMAP_LPG1_PMR);	/* Enable clock */
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block panic_block = {
-	.notifier_call	= panic_event,
-};
-
-static int __init voiceblue_setup(void)
-{
-	if (!machine_is_voiceblue())
-		return -ENODEV;
-
-	/* Setup panic notifier */
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
-
-	return 0;
-}
-postcore_initcall(voiceblue_setup);
-
-static int wdt_gpio_state;
-
-void voiceblue_wdt_enable(void)
-{
-	gpio_direction_output(0, 0);
-	gpio_set_value(0, 1);
-	gpio_set_value(0, 0);
-	wdt_gpio_state = 0;
-}
-
-void voiceblue_wdt_disable(void)
-{
-	gpio_set_value(0, 0);
-	gpio_set_value(0, 1);
-	gpio_set_value(0, 0);
-	gpio_direction_input(0);
-}
-
-void voiceblue_wdt_ping(void)
-{
-	if (test_bit(MACHINE_REBOOT, &machine_state))
-		return;
-
-	wdt_gpio_state = !wdt_gpio_state;
-	gpio_set_value(0, wdt_gpio_state);
-}
-
-static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	set_bit(MACHINE_REBOOT, &machine_state);
-	voiceblue_wdt_enable();
-	while (1) ;
-}
-
-EXPORT_SYMBOL(voiceblue_wdt_enable);
-EXPORT_SYMBOL(voiceblue_wdt_disable);
-EXPORT_SYMBOL(voiceblue_wdt_ping);
-
-static void __init voiceblue_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	/* Watchdog */
-	gpio_request(0, "Watchdog");
-	/* smc91x reset */
-	gpio_request(7, "SMC91x reset");
-	gpio_direction_output(7, 1);
-	udelay(2);	/* wait at least 100ns */
-	gpio_set_value(7, 0);
-	mdelay(50);	/* 50ms until PHY ready */
-	/* smc91x interrupt pin */
-	gpio_request(8, "SMC91x irq");
-	/* 16C554 reset*/
-	gpio_request(6, "16C554 reset");
-	gpio_direction_output(6, 0);
-	/* 16C554 interrupt pins */
-	gpio_request(12, "16C554 irq");
-	gpio_request(13, "16C554 irq");
-	gpio_request(14, "16C554 irq");
-	gpio_request(15, "16C554 irq");
-	irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
-
-	voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
-	voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
-	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-	omap_serial_init();
-	omap1_usb_init(&voiceblue_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	/* There is a good chance board is going up, so enable power LED
-	 * (it is connected through invertor) */
-	omap_writeb(0x00, OMAP_LPG1_LCR);
-	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
-}
-
-MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
-	/* Maintainer: Ladislav Michl <michl@2n.cz> */
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= voiceblue_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= voiceblue_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/camera.h
index 847d00f0b..caa6c0d6f 100644
--- a/arch/arm/mach-omap1/include/mach/camera.h
+++ b/arch/arm/mach-omap1/camera.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_CAMERA_H_
 #define __ASM_ARCH_CAMERA_H_
 
-#include <media/omap1_camera.h>
+#include <linux/platform_data/media/omap1_camera.h>
 
 void omap1_camera_init(void *);
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 325e60300..8c8be861f 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -25,7 +25,7 @@
 #include <mach/mux.h>
 
 #include <mach/omap7xx.h>
-#include <mach/camera.h>
+#include "camera.h"
 #include <mach/hardware.h>
 
 #include "common.h"
@@ -33,24 +33,6 @@
 #include "mmc.h"
 #include "sram.h"
 
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
-
-static struct platform_device omap_pcm = {
-	.name	= "omap-pcm-audio",
-	.id	= -1,
-};
-
-static void omap_init_audio(void)
-{
-	platform_device_register(&omap_pcm);
-}
-
-#else
-static inline void omap_init_audio(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
 
 #define	OMAP_RTC_BASE		0xfffb4800
@@ -425,7 +407,6 @@ static int __init omap1_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 
-	omap_init_audio();
 	omap_init_mbox();
 	omap_init_rtc();
 	omap_init_spi100k();
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 7b02ed218..f6ba589cd 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -25,6 +25,7 @@
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
 
@@ -265,6 +266,42 @@ static const struct platform_device_info omap_dma_dev_info = {
 	.num_res = 1,
 };
 
+/* OMAP730, OMAP850 */
+static const struct dma_slave_map omap7xx_sdma_map[] = {
+	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
+	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
+	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
+	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
+	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
+	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
+	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
+	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
+	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
+	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
+	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
+	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
+};
+
+/* OMAP1510, OMAP1610*/
+static const struct dma_slave_map omap1xxx_sdma_map[] = {
+	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
+	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
+	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) },
+	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) },
+	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) },
+	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) },
+	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
+	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
+	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
+	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
+	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
+	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
+	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
+	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
+	{ "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) },
+	{ "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) },
+};
+
 static struct omap_system_dma_plat_info dma_plat_info __initdata = {
 	.reg_map	= reg_map,
 	.channel_stride	= 0x40,
@@ -342,6 +379,14 @@ static int __init omap1_system_dma_init(void)
 	p.dma_attr = d;
 	p.errata = configure_dma_errata();
 
+	if (cpu_is_omap7xx()) {
+		p.slave_map = omap7xx_sdma_map;
+		p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
+	} else {
+		p.slave_map = omap1xxx_sdma_map;
+		p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
+	}
+
 	ret = platform_device_add_data(pdev, &p, sizeof(p));
 	if (ret) {
 		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index b3fb531af..99cda402e 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -11,7 +11,7 @@
 #include <linux/mtd/map.h>
 
 #include <mach/tc.h>
-#include <mach/flash.h>
+#include "flash.h"
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/include/mach/flash.h b/arch/arm/mach-omap1/flash.h
index 0d88499b7..0d88499b7 100644
--- a/arch/arm/mach-omap1/include/mach/flash.h
+++ b/arch/arm/mach-omap1/flash.h
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 3c0e42219..39e20d0ea 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -87,7 +87,7 @@ static void fpga_mask_ack_irq(struct irq_data *d)
 	fpga_ack_irq(d);
 }
 
-static void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
+static void innovator_fpga_IRQ_demux(struct irq_desc *desc)
 {
 	u32 stat;
 	int fpga_irq;
@@ -169,7 +169,7 @@ void omap1510_fpga_init_irq(void)
 		}
 
 		irq_set_handler(i, handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
+		irq_clear_status_flags(i, IRQ_NOREQUEST);
 	}
 
 	/*
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index adb5e7649..6dfc3e121 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -14,6 +14,8 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
 
+#include <mach/irqs.h>
+
 /*
  * Interrupt number used for passing control from FIQ to IRQ.
  * IRQ12, described as reserved, has been selected.
diff --git a/arch/arm/mach-omap1/include/mach/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
deleted file mode 100644
index 27916b210..000000000
--- a/arch/arm/mach-omap1/include/mach/board-voiceblue.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-
-#endif /*  __ASM_ARCH_VOICEBLUE_H */
-
diff --git a/arch/arm/mach-omap1/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h
index f82a8dcaa..d09b2bc49 100644
--- a/arch/arm/mach-omap1/include/mach/mtd-xip.h
+++ b/arch/arm/mach-omap1/include/mach/mtd-xip.h
@@ -39,7 +39,7 @@ static inline unsigned long xip_omap_mpu_timer_read(int nr)
 #define xip_currtime()		(~xip_omap_mpu_timer_read(0))
 
 /*
- * It's permitted to do approxmation for xip_elapsed_since macro
+ * It's permitted to do approximation for xip_elapsed_since macro
  * (see linux/mtd/xip.h)
  */
 
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index 4869633de..9cca6a567 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -45,7 +45,7 @@ static void set_omap_uart_info(unsigned char port)
 	*uart_info = port;
 }
 
-static void putc(int c)
+static inline void putc(int c)
 {
 	if (!uart_base)
 		return;
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index f4d346fda..b11edc8a4 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -262,7 +262,7 @@ void __init omap1_init_irq(void)
 
 			irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
 			omap_irq_set_cfg(j, 0, 0, irq_trigger);
-			set_irq_flags(j, IRQF_VALID);
+			irq_clear_status_flags(j, IRQ_NOREQUEST);
 		}
 		omap_alloc_gc(irq_banks[i].va, irq_base + i * 32, 32);
 	}
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a7588cfd0..524977a31 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -124,29 +124,26 @@ static int omap_mpu_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void omap_mpu_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
+static int omap_mpu_set_oneshot(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		omap_mpu_set_autoreset(0);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		omap_mpu_timer_stop(0);
-		omap_mpu_remove_autoreset(0);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	omap_mpu_timer_stop(0);
+	omap_mpu_remove_autoreset(0);
+	return 0;
+}
+
+static int omap_mpu_set_periodic(struct clock_event_device *evt)
+{
+	omap_mpu_set_autoreset(0);
+	return 0;
 }
 
 static struct clock_event_device clockevent_mpu_timer1 = {
-	.name		= "mpu_timer1",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= omap_mpu_set_next_event,
-	.set_mode	= omap_mpu_set_mode,
+	.name			= "mpu_timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= omap_mpu_set_next_event,
+	.set_state_periodic	= omap_mpu_set_periodic,
+	.set_state_oneshot	= omap_mpu_set_oneshot,
 };
 
 static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 36bf174b3..0ae6c52a7 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -114,29 +114,28 @@ static int omap_32k_timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void omap_32k_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
+static int omap_32k_timer_shutdown(struct clock_event_device *evt)
 {
 	omap_32k_timer_stop();
+	return 0;
+}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+static int omap_32k_timer_set_periodic(struct clock_event_device *evt)
+{
+	omap_32k_timer_stop();
+	omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+	return 0;
 }
 
 static struct clock_event_device clockevent_32k_timer = {
-	.name		= "32k-timer",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= omap_32k_timer_set_next_event,
-	.set_mode	= omap_32k_timer_set_mode,
+	.name			= "32k-timer",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= omap_32k_timer_set_next_event,
+	.set_state_shutdown	= omap_32k_timer_shutdown,
+	.set_state_periodic	= omap_32k_timer_set_periodic,
+	.set_state_oneshot	= omap_32k_timer_shutdown,
+	.tick_resume		= omap_32k_timer_shutdown,
 };
 
 static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4a023e8d1..5a0b380a8 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP3
 	select PM_OPP if PM
 	select PM if CPU_IDLE
 	select SOC_HAS_OMAP2_SDRC
+	select ARM_ERRATA_430973
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -29,12 +30,14 @@ config ARCH_OMAP4
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select OMAP_INTERCONNECT
+	select OMAP_INTERCONNECT_BARRIER
 	select PL310_ERRATA_588369 if CACHE_L2X0
 	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PM_OPP if PM
 	select PM if CPU_IDLE
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
+	select OMAP_INTERCONNECT
 
 config SOC_OMAP5
 	bool "TI OMAP5"
@@ -43,9 +46,12 @@ config SOC_OMAP5
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
+	select OMAP_INTERCONNECT
+	select OMAP_INTERCONNECT_BARRIER
+	select PM_OPP if PM
+	select ZONE_DMA if ARM_LPAE
 
 config SOC_AM33XX
 	bool "TI AM33XX"
@@ -61,6 +67,10 @@ config SOC_AM43XX
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
 	select HAVE_ARM_SCU
+	select GENERIC_CLOCKEVENTS_BROADCAST
+	select HAVE_ARM_TWD
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"
@@ -68,18 +78,23 @@ config SOC_DRA7XX
 	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
+	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select IRQ_CROSSBAR
 	select ARM_ERRATA_798181 if SMP
+	select OMAP_INTERCONNECT
+	select OMAP_INTERCONNECT_BARRIER
+	select PM_OPP if PM
+	select ZONE_DMA if ARM_LPAE
 
 config ARCH_OMAP2PLUS
 	bool
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MACH_OMAP_GENERIC
 	select MEMORY
 	select MFD_SYSCON
@@ -87,11 +102,15 @@ config ARCH_OMAP2PLUS
 	select OMAP_GPMC
 	select PINCTRL
 	select SOC_BUS
-	select TI_PRIV_EDMA
 	select OMAP_IRQCHIP
+	select CLKSRC_TI_32K
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
 
+config OMAP_INTERCONNECT_BARRIER
+	bool
+	select ARM_HEAVY_MB
+	
 
 if ARCH_OMAP2PLUS
 
@@ -108,6 +127,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select NEON if CPU_V7
 	select PM
 	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
 	select VFP
@@ -178,26 +198,6 @@ config MACH_OMAP_LDP
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP3530_LV_SOM
-	bool "OMAP3 Logic 3530 LV SOM board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-	help
-	 Support for the LogicPD OMAP3530 SOM Development kit
-	 for full description please see the products webpage at
-	 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
-
-config MACH_OMAP3_TORPEDO
-	bool "OMAP3 Logic 35x Torpedo board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-	help
-	 Support for the LogicPD OMAP35x Torpedo Development kit
-	 for full description please see the products webpage at
-	 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
@@ -208,7 +208,6 @@ config MACH_OMAP3_PANDORA
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_NOKIA_N810
        bool
@@ -245,4 +244,12 @@ endmenu
 
 endif
 
+config OMAP5_ERRATA_801819
+	bool "Errata 801819: An eviction from L1 data cache might stall indefinitely"
+	depends on SOC_OMAP5 || SOC_DRA7XX
+	help
+	  A livelock can occur in the L2 cache arbitration that might prevent
+	  a snoop from completing. Under certain conditions this can cause the
+	  system to deadlock.
+
 endmenu
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 903c85be2..a7f2d051f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -2,18 +2,17 @@
 # Makefile for the linux kernel.
 #
 
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+ccflags-y := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-omap/include
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
-	 omap_device.o sram.o drm.o
+	 omap_device.o omap-headsmp.o sram.o drm.o
 
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
 					  omap_hwmod_common_data.o
-clock-common				= clock.o clock_common_data.o \
-					  clkt_dpll.o clkt_clksel.o
+clock-common				= clock.o
 secure-common				= omap-smc.o omap-secure.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
@@ -33,7 +32,7 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # SMP support ONLY available for OMAP4
 
-smp-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
+smp-$(CONFIG_SMP)			+= omap-smp.o
 smp-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 omap-4-5-common				=  omap4-common.o omap-wakeupgen.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common) $(smp-y) sleep44xx.o
@@ -49,11 +48,9 @@ AFLAGS_sleep44xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 # Functions loaded to SRAM
 obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
-obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
 AFLAGS_sram242x.o			:=-Wa,-march=armv6
 AFLAGS_sram243x.o			:=-Wa,-march=armv6
-AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 
 # Restart code (OMAP4/5 currently in omap4-common.c)
 obj-$(CONFIG_SOC_OMAP2420)		+= omap2-restart.o
@@ -81,13 +78,16 @@ obj-$(CONFIG_ARCH_OMAP4)		+= opp4xxx_data.o
 endif
 
 # Power Management
+omap-4-5-pm-common			= omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-pm-common)
+obj-$(CONFIG_ARCH_OMAP5)		+= $(omap-4-5-pm-common)
 obj-$(CONFIG_OMAP_PM_NOOP)		+= omap-pm-noop.o
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
-omap-4-5-pm-common			=  pm44xx.o omap-mpuss-lowpower.o
+omap-4-5-pm-common			+= pm44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-pm-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-pm-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-pm-common)
@@ -182,24 +182,16 @@ obj-$(CONFIG_SOC_DRA7XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= clockdomains7xx_data.o
 
 # Clock framework
-obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_virt_prcm_set.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o clkt_iclk.o
-obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
-obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX)		+= dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM43XX)		+= $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM43XX)		+= $(clock-common)
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
@@ -234,18 +226,12 @@ obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
 # EMU peripherals
 obj-$(CONFIG_HW_PERF_EVENTS)		+= pmu.o
 
-iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
-obj-y					+= $(iommu-m) $(iommu-y)
-
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
deleted file mode 100644
index b03e562ac..000000000
--- a/arch/arm/mach-omap2/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-  zreladdr-y		+= 0x80008000
-params_phys-y		:= 0x80000100
-initrd_phys-y		:= 0x80800000
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 34ff14b7b..bab814d2f 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -16,17 +16,12 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 
+#include <asm/setup.h>
 #include <asm/mach/arch.h>
+#include <asm/system_info.h>
 
 #include "common.h"
 
-#if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
-#define intc_of_init	NULL
-#endif
-#ifndef CONFIG_ARCH_OMAP4
-#define gic_of_init		NULL
-#endif
-
 static const struct of_device_id omap_dt_match_table[] __initconst = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "ti,omap-infra", },
@@ -53,7 +48,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap2_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= omap242x_boards_compat,
 	.restart	= omap2xxx_restart,
 MACHINE_END
@@ -70,7 +65,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap2_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= omap243x_boards_compat,
 	.restart	= omap2xxx_restart,
 MACHINE_END
@@ -83,13 +78,41 @@ static const char *const n900_boards_compat[] __initconst = {
 	NULL,
 };
 
+/* Set system_rev from atags */
+static void __init rx51_set_system_rev(const struct tag *tags)
+{
+	const struct tag *tag;
+
+	if (tags->hdr.tag != ATAG_CORE)
+		return;
+
+	for_each_tag(tag, tags) {
+		if (tag->hdr.tag == ATAG_REVISION) {
+			system_rev = tag->u.revision.rev;
+			break;
+		}
+	}
+}
+
+/* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags,
+ * save them while the data is still not overwritten
+ */
+static void __init rx51_reserve(void)
+{
+	const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100);
+
+	save_atags(tags);
+	rx51_set_system_rev(tags);
+	omap_reserve();
+}
+
 DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
-	.reserve	= omap_reserve,
+	.reserve	= rx51_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap3_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= n900_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
@@ -107,12 +130,13 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.init_early	= omap3430_init_early,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap3_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= omap3_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
 static const char *const omap36xx_boards_compat[] __initconst = {
+	"ti,omap3630",
 	"ti,omap36xx",
 	NULL,
 };
@@ -123,7 +147,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
 	.init_early	= omap3630_init_early,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap3_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= omap36xx_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
@@ -169,7 +193,7 @@ static const char *const ti814x_boards_compat[] __initconst = {
 	NULL,
 };
 
-DT_MACHINE_START(TI81XX_DT, "Generic ti814x (Flattened Device Tree)")
+DT_MACHINE_START(TI814X_DT, "Generic ti814x (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.map_io		= ti81xx_map_io,
 	.init_early	= ti814x_init_early,
@@ -250,6 +274,9 @@ static const char *const omap5_boards_compat[] __initconst = {
 };
 
 DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= SZ_2G,
+#endif
 	.reserve	= omap_reserve,
 	.smp		= smp_ops(omap4_smp_ops),
 	.map_io		= omap5_map_io,
@@ -279,7 +306,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
 	.init_late	= am43xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap3_gptimer_timer_init,
+	.init_time	= omap4_local_timer_init,
 	.dt_compat	= am43_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END
@@ -295,9 +322,12 @@ static const char *const dra74x_boards_compat[] __initconst = {
 };
 
 DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= SZ_2G,
+#endif
 	.reserve	= omap_reserve,
 	.smp		= smp_ops(omap4_smp_ops),
-	.map_io		= omap5_map_io,
+	.map_io		= dra7xx_map_io,
 	.init_early	= dra7xx_init_early,
 	.init_late	= dra7xx_init_late,
 	.init_irq	= omap_gic_of_init,
@@ -315,8 +345,11 @@ static const char *const dra72x_boards_compat[] __initconst = {
 };
 
 DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= SZ_2G,
+#endif
 	.reserve	= omap_reserve,
-	.map_io		= omap5_map_io,
+	.map_io		= dra7xx_map_io,
 	.init_early	= dra7xx_init_early,
 	.init_late	= dra7xx_init_late,
 	.init_irq	= omap_gic_of_init,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index c2975af4c..390795b33 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -39,7 +39,7 @@
 #include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include <video/omap-panel-data.h>
 
 #include "board-flash.h"
@@ -47,6 +47,7 @@
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
+#include "display.h"
 
 #define LDP_SMSC911X_CS		1
 #define LDP_SMSC911X_GPIO	152
@@ -424,6 +425,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_ldp_init,
 	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
deleted file mode 100644
index 6049f60a8..000000000
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3logic.c
- *
- * Copyright (C) 2010 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Copyright (C) 2010-2012 Logic Product Development, Inc.
- * Peter Barada <peter.barada@logicpd.com>
- * Ashwin BIhari <ashwin.bihari@logicpd.com>
- *
- * Modified from Beagle, EVM, and RX51
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <linux/i2c/twl.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-#define OMAP3LOGIC_SMSC911X_CS			1
-
-#define OMAP3530_LV_SOM_MMC_GPIO_CD		110
-#define OMAP3530_LV_SOM_MMC_GPIO_WP		126
-#define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ	152
-
-#define OMAP3_TORPEDO_MMC_GPIO_CD		127
-#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ		129
-
-static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3logic_vmmc1 = {
-	.constraints = {
-		.name			= "VMMC1",
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(omap3logic_vmmc1_supply),
-	.consumer_supplies      = omap3logic_vmmc1_supply,
-};
-
-static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
-	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
-			| BIT(13) | BIT(15) | BIT(16) | BIT(17),
-};
-
-static struct twl4030_usb_data omap3logic_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-
-static struct twl4030_platform_data omap3logic_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &omap3logic_gpio_data,
-	.vmmc1		= &omap3logic_vmmc1,
-	.usb		= &omap3logic_usb_data,
-};
-
-static int __init omap3logic_i2c_init(void)
-{
-	omap3_pmic_init("twl4030", &omap3logic_twldata);
-	return 0;
-}
-
-static struct omap2_hsmmc_info __initdata board_mmc_info[] = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}      /* Terminator */
-};
-
-static void __init board_mmc_init(void)
-{
-	if (machine_is_omap3530_lv_som()) {
-		/* OMAP3530 LV SOM board */
-		board_mmc_info[0].gpio_cd = OMAP3530_LV_SOM_MMC_GPIO_CD;
-		board_mmc_info[0].gpio_wp = OMAP3530_LV_SOM_MMC_GPIO_WP;
-		omap_mux_init_signal("gpio_110", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("gpio_126", OMAP_PIN_OUTPUT);
-	} else if (machine_is_omap3_torpedo()) {
-		/* OMAP3 Torpedo board */
-		board_mmc_info[0].gpio_cd = OMAP3_TORPEDO_MMC_GPIO_CD;
-		omap_mux_init_signal("gpio_127", OMAP_PIN_OUTPUT);
-	} else {
-		/* unsupported board */
-		printk(KERN_ERR "%s(): unknown machine type\n", __func__);
-		return;
-	}
-
-	omap_hsmmc_init(board_mmc_info);
-}
-
-static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
-	.cs             = OMAP3LOGIC_SMSC911X_CS,
-	.gpio_irq       = -EINVAL,
-	.gpio_reset     = -EINVAL,
-};
-
-/* TODO/FIXME (comment by Peter Barada, LogicPD):
- * Fix the PBIAS voltage for Torpedo MMC1 pins that
- * are used for other needs (IRQs, etc).            */
-static void omap3torpedo_fix_pbias_voltage(void)
-{
-	u16 control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
-	u32 reg;
-
-	if (machine_is_omap3_torpedo())
-	{
-		/* Set the bias for the pin */
-		reg = omap_ctrl_readl(control_pbias_offset);
-
-		reg &= ~OMAP343X_PBIASLITEPWRDNZ1;
-		omap_ctrl_writel(reg, control_pbias_offset);
-
-		/* 100ms delay required for PBIAS configuration */
-		msleep(100);
-
-		reg |= OMAP343X_PBIASLITEVMODE1;
-		reg |= OMAP343X_PBIASLITEPWRDNZ1;
-		omap_ctrl_writel(reg | 0x300, control_pbias_offset);
-	}
-}
-
-static inline void __init board_smsc911x_init(void)
-{
-	if (machine_is_omap3530_lv_som()) {
-		/* OMAP3530 LV SOM board */
-		board_smsc911x_data.gpio_irq =
-					OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ;
-		omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT);
-	} else if (machine_is_omap3_torpedo()) {
-		/* OMAP3 Torpedo board */
-		board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ;
-		omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT);
-	} else {
-		/* unsupported board */
-		printk(KERN_ERR "%s(): unknown machine type\n", __func__);
-		return;
-	}
-
-	gpmc_smsc911x_init(&board_smsc911x_data);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* mUSB */
-	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap3logic_init(void)
-{
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap3torpedo_fix_pbias_voltage();
-	omap3logic_i2c_init();
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	board_mmc_init();
-	board_smsc911x_init();
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap3logic_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap3logic_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
deleted file mode 100644
index 969e1003d..000000000
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * board-omap3pandora.c (Pandora Handheld Console)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/omap-gpmc.h>
-#include <linux/wl12xx.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/regulator/fixed.h>
-#include <linux/usb/phy.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define PANDORA_WIFI_IRQ_GPIO		21
-#define PANDORA_WIFI_NRESET_GPIO	23
-#define OMAP3_PANDORA_TS_GPIO		94
-
-static struct mtd_partition omap3pandora_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	}, {
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 15 * NAND_BLOCK_SIZE,
-	}, {
-		.name           = "uboot-env",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 1 * NAND_BLOCK_SIZE,
-	}, {
-		.name           = "boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 80 * NAND_BLOCK_SIZE,
-	}, {
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_nand_platform_data pandora_nand_data = {
-	.cs		= 0,
-	.devsize	= NAND_BUSWIDTH_16,
-	.xfer_type	= NAND_OMAP_PREFETCH_DMA,
-	.parts		= omap3pandora_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
-};
-
-static struct gpio_led pandora_gpio_leds[] = {
-	{
-		.name			= "pandora::sd1",
-		.default_trigger	= "mmc0",
-		.gpio			= 128,
-	}, {
-		.name			= "pandora::sd2",
-		.default_trigger	= "mmc1",
-		.gpio			= 129,
-	}, {
-		.name			= "pandora::bluetooth",
-		.gpio			= 158,
-	}, {
-		.name			= "pandora::wifi",
-		.gpio			= 159,
-	},
-};
-
-static struct gpio_led_platform_data pandora_gpio_led_data = {
-	.leds		= pandora_gpio_leds,
-	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
-};
-
-static struct platform_device pandora_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &pandora_gpio_led_data,
-	},
-};
-
-static struct platform_device pandora_backlight = {
-	.name	= "pandora-backlight",
-	.id	= -1,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
-{								\
-	.gpio		= gpio_num,				\
-	.type		= ev_type,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.debounce_interval = 4,					\
-	.desc		= "btn " descr,				\
-}
-
-#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
-	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
-
-static struct gpio_keys_button pandora_gpio_keys[] = {
-	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
-	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
-	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
-	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
-	GPIO_BUTTON_LOW(109,	KEY_PAGEUP,	"game 1"),
-	GPIO_BUTTON_LOW(111,	KEY_END,	"game 2"),
-	GPIO_BUTTON_LOW(106,	KEY_PAGEDOWN,	"game 3"),
-	GPIO_BUTTON_LOW(101,	KEY_HOME,	"game 4"),
-	GPIO_BUTTON_LOW(102,	KEY_RIGHTSHIFT,	"l"),
-	GPIO_BUTTON_LOW(97,	KEY_KPPLUS,	"l2"),
-	GPIO_BUTTON_LOW(105,	KEY_RIGHTCTRL,	"r"),
-	GPIO_BUTTON_LOW(107,	KEY_KPMINUS,	"r2"),
-	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
-	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
-	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
-	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
-	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
-};
-
-static struct gpio_keys_platform_data pandora_gpio_key_info = {
-	.buttons	= pandora_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
-};
-
-static struct platform_device pandora_keys_gpio = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &pandora_gpio_key_info,
-	},
-};
-
-static const uint32_t board_keymap[] = {
-	/* row, col, code */
-	KEY(0, 0, KEY_9),
-	KEY(0, 1, KEY_8),
-	KEY(0, 2, KEY_I),
-	KEY(0, 3, KEY_J),
-	KEY(0, 4, KEY_N),
-	KEY(0, 5, KEY_M),
-	KEY(1, 0, KEY_0),
-	KEY(1, 1, KEY_7),
-	KEY(1, 2, KEY_U),
-	KEY(1, 3, KEY_H),
-	KEY(1, 4, KEY_B),
-	KEY(1, 5, KEY_SPACE),
-	KEY(2, 0, KEY_BACKSPACE),
-	KEY(2, 1, KEY_6),
-	KEY(2, 2, KEY_Y),
-	KEY(2, 3, KEY_G),
-	KEY(2, 4, KEY_V),
-	KEY(2, 5, KEY_FN),
-	KEY(3, 0, KEY_O),
-	KEY(3, 1, KEY_5),
-	KEY(3, 2, KEY_T),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_C),
-	KEY(4, 0, KEY_P),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_R),
-	KEY(4, 3, KEY_D),
-	KEY(4, 4, KEY_X),
-	KEY(5, 0, KEY_K),
-	KEY(5, 1, KEY_3),
-	KEY(5, 2, KEY_E),
-	KEY(5, 3, KEY_S),
-	KEY(5, 4, KEY_Z),
-	KEY(6, 0, KEY_L),
-	KEY(6, 1, KEY_2),
-	KEY(6, 2, KEY_W),
-	KEY(6, 3, KEY_A),
-	KEY(6, 4, KEY_DOT),
-	KEY(7, 0, KEY_ENTER),
-	KEY(7, 1, KEY_1),
-	KEY(7, 2, KEY_Q),
-	KEY(7, 3, KEY_LEFTSHIFT),
-	KEY(7, 4, KEY_COMMA),
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data pandora_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-static struct connector_atv_platform_data pandora_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device pandora_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &pandora_tv_pdata,
-};
-
-static struct omap_dss_board_info pandora_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void pandora_wl1251_init_card(struct mmc_card *card)
-{
-	/*
-	 * We have TI wl1251 attached to MMC3. Pass this information to
-	 * SDIO core because it can't be probed by normal methods.
-	 */
-	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
-		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-		card->cccr.wide_bus = 1;
-		card->cis.vendor = 0x104c;
-		card->cis.device = 0x9066;
-		card->cis.blksize = 512;
-		card->cis.max_dtr = 20000000;
-	}
-}
-
-static struct omap2_hsmmc_info omap3pandora_mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 126,
-		.ext_clock	= 0,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 127,
-		.ext_clock	= 1,
-		.transceiver	= true,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.init_card	= pandora_wl1251_init_card,
-	},
-	{}	/* Terminator */
-};
-
-static int omap3pandora_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int ret, gpio_32khz;
-
-	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
-	omap3pandora_mmc[0].gpio_cd = gpio + 0;
-	omap3pandora_mmc[1].gpio_cd = gpio + 1;
-	omap_hsmmc_late_init(omap3pandora_mmc);
-
-	/* gpio + 13 drives 32kHz buffer for wifi module */
-	gpio_32khz = gpio + 13;
-	ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz");
-	if (ret < 0) {
-		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-	.setup		= omap3pandora_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
-};
-
-static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-static struct regulator_consumer_supply pandora_vdds_supplies[] = {
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.1"),
-};
-
-static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
-	REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"),	/* hsusb port 2 */
-};
-
-/* ads7846 on SPI and 2 nub controllers on I2C */
-static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-	REGULATOR_SUPPLY("vcc", "3-0066"),
-	REGULATOR_SUPPLY("vcc", "3-0067"),
-};
-
-static struct regulator_consumer_supply pandora_adac_supply[] = {
-	REGULATOR_SUPPLY("vcc", "soc-audio"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data pandora_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc1_supply),
-	.consumer_supplies	= pandora_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
-static struct regulator_init_data pandora_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc2_supply),
-	.consumer_supplies	= pandora_vmmc2_supply,
-};
-
-/* VAUX1 for LCD */
-static struct regulator_init_data pandora_vaux1 = {
-	.constraints = {
-		.min_uV			= 3000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vcc_lcd_supply),
-	.consumer_supplies	= pandora_vcc_lcd_supply,
-};
-
-/* VAUX2 for USB host PHY */
-static struct regulator_init_data pandora_vaux2 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_usb_phy_supply),
-	.consumer_supplies	= pandora_usb_phy_supply,
-};
-
-/* VAUX4 for ads7846 and nubs */
-static struct regulator_init_data pandora_vaux4 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vaux4_supplies),
-	.consumer_supplies	= pandora_vaux4_supplies,
-};
-
-/* VSIM for audio DAC */
-static struct regulator_init_data pandora_vsim = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_adac_supply),
-	.consumer_supplies	= pandora_adac_supply,
-};
-
-/* Fixed regulator internal to Wifi module */
-static struct regulator_init_data pandora_vmmc3 = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
-	.consumer_supplies	= pandora_vmmc3_supply,
-};
-
-static struct fixed_voltage_config pandora_vwlan = {
-	.supply_name		= "vwlan",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= PANDORA_WIFI_NRESET_GPIO,
-	.startup_delay		= 50000, /* 50ms */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &pandora_vmmc3,
-};
-
-static struct platform_device pandora_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &pandora_vwlan,
-	},
-};
-
-static struct twl4030_bci_platform_data pandora_bci_data;
-
-static struct twl4030_power_data pandora_power_data = {
-	.use_poweroff	= true,
-};
-
-static struct twl4030_platform_data omap3pandora_twldata = {
-	.gpio		= &omap3pandora_gpio_data,
-	.vmmc1		= &pandora_vmmc1,
-	.vmmc2		= &pandora_vmmc2,
-	.vaux1		= &pandora_vaux1,
-	.vaux2		= &pandora_vaux2,
-	.vaux4		= &pandora_vaux4,
-	.vsim		= &pandora_vsim,
-	.keypad		= &pandora_kp_data,
-	.bci		= &pandora_bci_data,
-	.power		= &pandora_power_data,
-};
-
-static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("bq27500", 0x55),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-static int __init omap3pandora_i2c_init(void)
-{
-	omap3_pmic_get_config(&omap3pandora_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	omap3pandora_twldata.vdac->constraints.apply_uV = true;
-
-	omap3pandora_twldata.vpll2->constraints.apply_uV = true;
-	omap3pandora_twldata.vpll2->num_consumer_supplies =
-					ARRAY_SIZE(pandora_vdds_supplies);
-	omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
-
-	omap3_pmic_init("tps65950", &omap3pandora_twldata);
-	/* i2c2 pins are not connected */
-	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
-			ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
-	return 0;
-}
-
-static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-	.nreset_gpio		= 157,
-};
-
-static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
-	{
-		.modalias		= "panel-tpo-td043mtea1",
-		.bus_num		= 1,
-		.chip_select		= 1,
-		.max_speed_hz		= 375000,
-		.platform_data		= &pandora_lcd_pdata,
-	}
-};
-
-static void __init pandora_wl1251_init(void)
-{
-	struct wl1251_platform_data pandora_wl1251_pdata;
-	int ret;
-
-	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
-
-	pandora_wl1251_pdata.power_gpio = -1;
-
-	ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
-	if (ret < 0)
-		goto fail;
-
-	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
-	if (pandora_wl1251_pdata.irq < 0)
-		goto fail_irq;
-
-	pandora_wl1251_pdata.use_eeprom = true;
-	ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
-	if (ret < 0)
-		goto fail_irq;
-
-	return;
-
-fail_irq:
-	gpio_free(PANDORA_WIFI_IRQ_GPIO);
-fail:
-	printk(KERN_ERR "wl1251 board initialisation failed\n");
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = 16,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct platform_device *omap3pandora_devices[] __initdata = {
-	&pandora_leds_gpio,
-	&pandora_keys_gpio,
-	&pandora_vwlan_device,
-	&pandora_backlight,
-	&pandora_tv_connector_device,
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init omap3pandora_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_hsmmc_init(omap3pandora_mmc);
-	omap3pandora_i2c_init();
-	pandora_wl1251_init();
-	platform_add_devices(omap3pandora_devices,
-			ARRAY_SIZE(omap3pandora_devices));
-	omap_display_init(&pandora_dss_data);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-	spi_register_board_info(omap3pandora_spi_board_info,
-			ARRAY_SIZE(omap3pandora_spi_board_info));
-	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	gpmc_nand_init(&pandora_nand_data, NULL);
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap3pandora_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 14edcd7a2..a5ab712c1 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -30,6 +30,8 @@
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 
+#include <plat/dmtimer.h>
+
 #include <asm/system_info.h>
 
 #include "common.h"
@@ -39,7 +41,7 @@
 
 #include <sound/tlv320aic3x.h>
 #include <sound/tpa6130a2-plat.h>
-#include <media/si4713.h>
+#include <linux/platform_data/media/si4713.h>
 #include <linux/platform_data/leds-lp55xx.h>
 
 #include <linux/platform_data/tsl2563.h>
@@ -47,9 +49,8 @@
 
 #include <video/omap-panel-data.h>
 
-#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
-#include <media/ir-rx51.h>
-#endif
+#include <linux/platform_data/pwm_omap_dmtimer.h>
+#include <linux/platform_data/media/ir-rx51.h>
 
 #include "mux.h"
 #include "omap-pm.h"
@@ -1212,10 +1213,35 @@ static void __init rx51_init_tsc2005(void)
 				gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
 }
 
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = {
+	.request_by_node = omap_dm_timer_request_by_node,
+	.request_specific = omap_dm_timer_request_specific,
+	.request = omap_dm_timer_request,
+	.set_source = omap_dm_timer_set_source,
+	.get_irq = omap_dm_timer_get_irq,
+	.set_int_enable = omap_dm_timer_set_int_enable,
+	.set_int_disable = omap_dm_timer_set_int_disable,
+	.free = omap_dm_timer_free,
+	.enable = omap_dm_timer_enable,
+	.disable = omap_dm_timer_disable,
+	.get_fclk = omap_dm_timer_get_fclk,
+	.start = omap_dm_timer_start,
+	.stop = omap_dm_timer_stop,
+	.set_load = omap_dm_timer_set_load,
+	.set_match = omap_dm_timer_set_match,
+	.set_pwm = omap_dm_timer_set_pwm,
+	.set_prescaler = omap_dm_timer_set_prescaler,
+	.read_counter = omap_dm_timer_read_counter,
+	.write_counter = omap_dm_timer_write_counter,
+	.read_status = omap_dm_timer_read_status,
+	.write_status = omap_dm_timer_write_status,
+};
+#endif
+
 #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
 static struct lirc_rx51_platform_data rx51_lirc_data = {
 	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
-	.pwm_timer = 9, /* Use GPT 9 for CIR */
 };
 
 static struct platform_device rx51_lirc_device = {
@@ -1257,7 +1283,7 @@ static struct platform_device omap3_rom_rng_device = {
 static void __init rx51_init_omap3_rom_rng(void)
 {
 	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
-		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+		pr_info("RX-51: Registering OMAP3 HWRNG device\n");
 		platform_device_register(&omap3_rom_rng_device);
 	}
 }
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 9cfebc5c7..180c6aa63 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -15,13 +15,14 @@
 #include <linux/spi/spi.h>
 #include <linux/mm.h>
 #include <asm/mach-types.h>
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include <video/omap-panel-data.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "soc.h"
 #include "board-rx51.h"
+#include "display.h"
 
 #include "mux.h"
 
@@ -32,7 +33,6 @@
 static struct connector_atv_platform_data rx51_tv_pdata = {
 	.name = "tv",
 	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
 	.invert_polarity = false,
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 2d1e5a6be..41161ca97 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -136,6 +136,6 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.init_irq	= omap3_init_irq,
 	.init_machine	= rx51_init,
 	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
deleted file mode 100644
index eb69acf21..000000000
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * OMAP34xx M2 divider clock code
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3xxx.h"
-#include "clock34xx.h"
-#include "sdrc.h"
-#include "sram.h"
-
-#define CYCLES_PER_MHZ			1000000
-
-/*
- * CORE DPLL (DPLL3) M2 divider rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate.  Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
-					unsigned long parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 new_div = 0;
-	u32 unlock_dll = 0;
-	u32 c;
-	unsigned long validrate, sdrcrate, _mpurate;
-	struct omap_sdrc_params *sdrc_cs0;
-	struct omap_sdrc_params *sdrc_cs1;
-	int ret;
-	unsigned long clkrate;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	sdrcrate = __clk_get_rate(sdrc_ick_p);
-	clkrate = __clk_get_rate(hw->clk);
-	if (rate > clkrate)
-		sdrcrate <<= ((rate / clkrate) >> 1);
-	else
-		sdrcrate >>= ((clkrate / rate) >> 1);
-
-	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
-	if (ret)
-		return -EINVAL;
-
-	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
-		pr_debug("clock: will unlock SDRC DLL\n");
-		unlock_dll = 1;
-	}
-
-	/*
-	 * XXX This only needs to be done when the CPU frequency changes
-	 */
-	_mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
-	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
-	c += 1;  /* for safety */
-	c *= SDRC_MPURATE_LOOPS;
-	c >>= SDRC_MPURATE_SCALE;
-	if (c == 0)
-		c = 1;
-
-	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
-		 clkrate, validrate);
-	pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
-	if (sdrc_cs1)
-		pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-			 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-			 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
-	if (sdrc_cs1)
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clkrate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-	else
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clkrate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  0, 0, 0, 0);
-	return 0;
-}
-
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
deleted file mode 100644
index 7ee26108a..000000000
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * clkt_clksel.c - OMAP2/3/4 clksel clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * clksel clocks are clocks that do not have a fixed parent, or that
- * can divide their parent's rate, or possibly both at the same time, based
- * on the contents of a hardware register bitfield.
- *
- * All of the various mux and divider settings can be encoded into
- * struct clksel* data structures, and then these can be autogenerated
- * from some hardware database for each new chip generation.  This
- * should avoid the need to write, review, and validate a lot of new
- * clock code for each new chip, since it can be exported from the SoC
- * design flow.  This is now done on OMAP4.
- *
- * The fusion of mux and divider clocks is a software creation.  In
- * hardware reality, the multiplexer (parent selection) and the
- * divider exist separately.  XXX At some point these clksel clocks
- * should be split into "divider" clocks and "mux" clocks to better
- * match the hardware.
- *
- * (The name "clksel" comes from the name of the corresponding
- * register field in the OMAP2/3 family of SoCs.)
- *
- * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
- * many of the OMAP1 clocks should be convertible to use this
- * mechanism.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-#include "clock.h"
-
-/* Private functions */
-
-/**
- * _get_clksel_by_parent() - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk,
-						  struct clk *src_clk)
-{
-	const struct clksel *clks;
-
-	if (!src_clk)
-		return NULL;
-
-	for (clks = clk->clksel; clks->parent; clks++)
-		if (clks->parent == src_clk)
-			break; /* Found the requested parent */
-
-	if (!clks->parent) {
-		/* This indicates a data problem */
-		WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
-		     __clk_get_name(clk->hw.clk), __clk_get_name(src_clk));
-		return NULL;
-	}
-
-	return clks;
-}
-
-/**
- * _write_clksel_reg() - program a clock's clksel register in hardware
- * @clk: struct clk * to program
- * @v: clksel bitfield value to program (with LSB at bit 0)
- *
- * Shift the clksel register bitfield value @v to its appropriate
- * location in the clksel register and write it in.  This function
- * will ensure that the write to the clksel_reg reaches its
- * destination before returning -- important since PRM and CM register
- * accesses can be quite slow compared to ARM cycles -- but does not
- * take into account any time the hardware might take to switch the
- * clock source.
- */
-static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
-{
-	u32 v;
-
-	v = omap2_clk_readl(clk, clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	omap2_clk_writel(v, clk, clk->clksel_reg);
-
-	v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */
-}
-
-/**
- * _clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor.  The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling.  Returns 0 on error or returns the actual integer divisor
- * upon success.
- */
-static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	struct clk *parent;
-
-	parent = __clk_get_parent(clk->hw.clk);
-
-	clks = _get_clksel_by_parent(clk, parent);
-	if (!clks)
-		return 0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		if (clkr->val == field_val)
-			break;
-	}
-
-	if (!clkr->div) {
-		/* This indicates a data error */
-		WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
-		     __clk_get_name(clk->hw.clk), field_val,
-		     __clk_get_name(parent));
-		return 0;
-	}
-
-	return clkr->div;
-}
-
-/**
- * _divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock
- * divisor, find the corresponding register field value.  Returns the
- * register field value _before_ left-shifting (i.e., LSB is at bit
- * 0); or returns 0xFFFFFFFF (~0) upon error.
- */
-static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	struct clk *parent;
-
-	/* should never happen */
-	WARN_ON(div == 0);
-
-	parent = __clk_get_parent(clk->hw.clk);
-	clks = _get_clksel_by_parent(clk, parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		if (clkr->div == div)
-			break;
-	}
-
-	if (!clkr->div) {
-		pr_err("clock: %s: could not find divisor %d for parent %s\n",
-		       __clk_get_name(clk->hw.clk), div,
-		       __clk_get_name(parent));
-		return ~0;
-	}
-
-	return clkr->val;
-}
-
-/**
- * _read_divisor() - get current divisor applied to parent clock (from hdwr)
- * @clk: OMAP struct clk to use.
- *
- * Read the current divisor register value for @clk that is programmed
- * into the hardware, convert it into the actual divisor value, and
- * return it; or return 0 on error.
- */
-static u32 _read_divisor(struct clk_hw_omap *clk)
-{
-	u32 v;
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return 0;
-
-	v = omap2_clk_readl(clk, clk->clksel_reg);
-	v &= clk->clksel_mask;
-	v >>= __ffs(clk->clksel_mask);
-
-	return _clksel_to_divisor(clk, v);
-}
-
-/* Public functions */
-
-/**
- * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
- *
- * Finds 'best' divider value in an array based on the source and target
- * rates.  The divider array must be sorted with smallest divider first.
- * This function is also used by the DPLL3 M2 divider code.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
-						 unsigned long target_rate,
-				u32 *new_div)
-{
-	unsigned long test_rate;
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 last_div = 0;
-	struct clk *parent;
-	unsigned long parent_rate;
-	const char *clk_name;
-
-	parent = __clk_get_parent(clk->hw.clk);
-	clk_name = __clk_get_name(clk->hw.clk);
-	parent_rate = __clk_get_rate(parent);
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return ~0;
-
-	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
-		 clk_name, target_rate);
-
-	*new_div = 1;
-
-	clks = _get_clksel_by_parent(clk, parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		/* Sanity check */
-		if (clkr->div <= last_div)
-			pr_err("clock: %s: clksel_rate table not sorted\n",
-			       clk_name);
-
-		last_div = clkr->div;
-
-		test_rate = parent_rate / clkr->div;
-
-		if (test_rate <= target_rate)
-			break; /* found it */
-	}
-
-	if (!clkr->div) {
-		pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
-		       clk_name, target_rate, __clk_get_name(parent));
-		return ~0;
-	}
-
-	*new_div = clkr->div;
-
-	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
-		 (parent_rate / clkr->div));
-
-	return parent_rate / clkr->div;
-}
-
-/*
- * Clocktype interface functions to the OMAP clock code
- * (i.e., those used in struct clk field function pointers, etc.)
- */
-
-/**
- * omap2_clksel_find_parent_index() - return the array index of the current
- * hardware parent of @hw
- * @hw: struct clk_hw * to find the current hardware parent of
- *
- * Given a struct clk_hw pointer @hw to the 'hw' member of a struct
- * clk_hw_omap record representing a source-selectable hardware clock,
- * read the hardware register and determine what its parent is
- * currently set to.  Intended to be called only by the common clock
- * framework struct clk_hw_ops.get_parent function pointer.  Return
- * the array index of this parent clock upon success -- there is no
- * way to return an error, so if we encounter an error, just WARN()
- * and pretend that we know that we're doing.
- */
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 r, found = 0;
-	struct clk *parent;
-	const char *clk_name;
-	int ret = 0, f = 0;
-
-	parent = __clk_get_parent(hw->clk);
-	clk_name = __clk_get_name(hw->clk);
-
-	/* XXX should be able to return an error */
-	WARN((!clk->clksel || !clk->clksel_mask),
-	     "clock: %s: attempt to call on a non-clksel clock", clk_name);
-
-	r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask;
-	r >>= __ffs(clk->clksel_mask);
-
-	for (clks = clk->clksel; clks->parent && !found; clks++) {
-		for (clkr = clks->rates; clkr->div && !found; clkr++) {
-			if (!(clkr->flags & cpu_mask))
-				continue;
-
-			if (clkr->val == r) {
-				found = 1;
-				ret = f;
-			}
-		}
-		f++;
-	}
-
-	/* This indicates a data error */
-	WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
-	     clk_name, r);
-
-	return ret;
-}
-
-
-/**
- * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
- * @clk: struct clk *
- *
- * This function is intended to be called only by the clock framework.
- * Each clksel clock should have its struct clk .recalc field set to this
- * function.  Returns the clock's current rate, based on its parent's rate
- * and its current divisor setting in the hardware.
- */
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
-	unsigned long rate;
-	u32 div = 0;
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
-	if (!parent_rate)
-		return 0;
-
-	div = _read_divisor(clk);
-	if (!div)
-		rate = parent_rate;
-	else
-		rate = parent_rate / div;
-
-	pr_debug("%s: recalc'd %s's rate to %lu (div %d)\n", __func__,
-		 __clk_get_name(hw->clk), rate, div);
-
-	return rate;
-}
-
-/**
- * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * This function is intended to be called only by the clock framework.
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
-			unsigned long *parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 new_div;
-
-	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-/**
- * omap2_clksel_set_rate() - program clock rate in hardware
- * @clk: struct clk * to program rate
- * @rate: target rate to program
- *
- * This function is intended to be called only by the clock framework.
- * Program @clk's rate to @rate in the hardware.  The clock can be
- * either enabled or disabled when this happens, although if the clock
- * is enabled, some downstream devices may glitch or behave
- * unpredictably when the clock rate is changed - this depends on the
- * hardware. This function does not currently check the usecount of
- * the clock, so if multiple drivers are using the clock, and the rate
- * is changed, they will all be affected without any notification.
- * Returns -EINVAL upon error, or 0 upon success.
- */
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 field_val, validrate, new_div = 0;
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	field_val = _divisor_to_clksel(clk, new_div);
-	if (field_val == ~0)
-		return -EINVAL;
-
-	_write_clksel_reg(clk, field_val);
-
-	pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(hw->clk),
-		 __clk_get_rate(hw->clk));
-
-	return 0;
-}
-
-/*
- * Clksel parent setting function - not passed in struct clk function
- * pointer - instead, the OMAP clock code currently assumes that any
- * parent-setting clock is a clksel clock, and calls
- * omap2_clksel_set_parent() by default
- */
-
-/**
- * omap2_clksel_set_parent() - change a clock's parent clock
- * @clk: struct clk * of the child clock
- * @new_parent: struct clk * of the new parent clock
- *
- * This function is intended to be called only by the clock framework.
- * Change the parent clock of clock @clk to @new_parent.  This is
- * intended to be used while @clk is disabled.  This function does not
- * currently check the usecount of the clock, so if multiple drivers
- * are using the clock, and the parent is changed, they will all be
- * affected without any notification.  Returns -EINVAL upon error, or
- * 0 upon success.
- */
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return -EINVAL;
-
-	_write_clksel_reg(clk, field_val);
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
deleted file mode 100644
index f251a14cb..000000000
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * OMAP2/3/4 DPLL clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include <asm/div64.h>
-
-#include "clock.h"
-
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER		2
-#define DPLL_MIN_DIVIDER		1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW		-1
-
-/*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
- */
-#define DPLL_SCALE_FACTOR		64
-#define DPLL_SCALE_BASE			2
-#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
-					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/*
- * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
- * From device data manual section 4.3 "DPLL and DLL Specifications".
- */
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN	500000
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX	2500000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW		-1
-#define DPLL_FINT_INVALID		-2
-
-/* Private functions */
-
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
- *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
- */
-static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
-{
-	struct dpll_data *dd;
-	long fint, fint_min, fint_max;
-	int ret = 0;
-
-	dd = clk->dpll_data;
-
-	/* DPLL divider must result in a valid jitter correction val */
-	fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
-
-	if (dd->flags & DPLL_J_TYPE) {
-		fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
-		fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
-	} else {
-		fint_min = ti_clk_features.fint_min;
-		fint_max = ti_clk_features.fint_max;
-	}
-
-	if (!fint_min || !fint_max) {
-		WARN(1, "No fint limits available!\n");
-		return DPLL_FINT_INVALID;
-	}
-
-	if (fint < ti_clk_features.fint_min) {
-		pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
-			 n);
-		dd->max_divider = n;
-		ret = DPLL_FINT_UNDERFLOW;
-	} else if (fint > ti_clk_features.fint_max) {
-		pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
-			 n);
-		dd->min_divider = n;
-		ret = DPLL_FINT_INVALID;
-	} else if (fint > ti_clk_features.fint_band1_max &&
-		   fint < ti_clk_features.fint_band2_min) {
-		pr_debug("rejecting n=%d due to Fint failure\n", n);
-		ret = DPLL_FINT_INVALID;
-	}
-
-	return ret;
-}
-
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
-					    unsigned int m, unsigned int n)
-{
-	unsigned long long num;
-
-	num = (unsigned long long)parent_rate * m;
-	do_div(num, n);
-	return num;
-}
-
-/*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL.  Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
- * a non-scaled m upon return.  This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
- */
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
-			   unsigned long target_rate,
-			   unsigned long parent_rate)
-{
-	int r = 0, carry = 0;
-
-	/* Unscale m and round if necessary */
-	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
-		carry = 1;
-	*m = (*m / DPLL_SCALE_FACTOR) + carry;
-
-	/*
-	 * The new rate must be <= the target rate to avoid programming
-	 * a rate that is impossible for the hardware to handle
-	 */
-	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-	if (*new_rate > target_rate) {
-		(*m)--;
-		*new_rate = 0;
-	}
-
-	/* Guard against m underflow */
-	if (*m < DPLL_MIN_MULTIPLIER) {
-		*m = DPLL_MIN_MULTIPLIER;
-		*new_rate = 0;
-		r = DPLL_MULT_UNDERFLOW;
-	}
-
-	if (*new_rate == 0)
-		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
-	return r;
-}
-
-/**
- * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
- * @v: bitfield value of the DPLL enable
- *
- * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
- * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
- */
-static int _omap2_dpll_is_in_bypass(u32 v)
-{
-	u8 mask, val;
-
-	mask = ti_clk_features.dpll_bypass_vals;
-
-	/*
-	 * Each set bit in the mask corresponds to a bypass value equal
-	 * to the bitshift. Go through each set-bit in the mask and
-	 * compare against the given register value.
-	 */
-	while (mask) {
-		val = __ffs(mask);
-		mask ^= (1 << val);
-		if (v == val)
-			return 1;
-	}
-
-	return 0;
-}
-
-/* Public functions */
-u8 omap2_init_dpll_parent(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	v = omap2_clk_readl(clk, dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	/* Reparent the struct clk in case the dpll is in bypass */
-	if (_omap2_dpll_is_in_bypass(v))
-		return 1;
-
-	return 0;
-}
-
-/**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values.  When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
-{
-	long long dpll_clk;
-	u32 dpll_mult, dpll_div, v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return 0;
-
-	/* Return bypass rate if DPLL is bypassed */
-	v = omap2_clk_readl(clk, dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	if (_omap2_dpll_is_in_bypass(v))
-		return __clk_get_rate(dd->clk_bypass);
-
-	v = omap2_clk_readl(clk, dd->mult_div1_reg);
-	dpll_mult = v & dd->mult_mask;
-	dpll_mult >>= __ffs(dd->mult_mask);
-	dpll_div = v & dd->div1_mask;
-	dpll_div >>= __ffs(dd->div1_mask);
-
-	dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
-	do_div(dpll_clk, dpll_div + 1);
-
-	return dpll_clk;
-}
-
-/* DPLL rate rounding code */
-
-/**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
- *
- * Given a DPLL and a desired target rate, round the target rate to a
- * possible, programmable rate for this DPLL.  Attempts to select the
- * minimum possible n.  Stores the computed (m, n) in the DPLL's
- * dpll_data structure so set_rate() will not need to call this
- * (expensive) function again.  Returns ~0 if the target rate cannot
- * be rounded, or the rounded rate upon success.
- */
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
-		unsigned long *parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	int m, n, r, scaled_max_m;
-	int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
-	unsigned long scaled_rt_rp;
-	unsigned long new_rate = 0;
-	struct dpll_data *dd;
-	unsigned long ref_rate;
-	long delta;
-	long prev_min_delta = LONG_MAX;
-	const char *clk_name;
-
-	if (!clk || !clk->dpll_data)
-		return ~0;
-
-	dd = clk->dpll_data;
-
-	ref_rate = __clk_get_rate(dd->clk_ref);
-	clk_name = __clk_get_name(hw->clk);
-	pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
-		 clk_name, target_rate);
-
-	scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
-	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
-	dd->last_rounded_rate = 0;
-
-	for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
-		/* Is the (input clk, divider) pair valid for the DPLL? */
-		r = _dpll_test_fint(clk, n);
-		if (r == DPLL_FINT_UNDERFLOW)
-			break;
-		else if (r == DPLL_FINT_INVALID)
-			continue;
-
-		/* Compute the scaled DPLL multiplier, based on the divider */
-		m = scaled_rt_rp * n;
-
-		/*
-		 * Since we're counting n up, a m overflow means we
-		 * can bail out completely (since as n increases in
-		 * the next iteration, there's no way that m can
-		 * increase beyond the current m)
-		 */
-		if (m > scaled_max_m)
-			break;
-
-		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    ref_rate);
-
-		/* m can't be set low enough for this n - try with a larger n */
-		if (r == DPLL_MULT_UNDERFLOW)
-			continue;
-
-		/* skip rates above our target rate */
-		delta = target_rate - new_rate;
-		if (delta < 0)
-			continue;
-
-		if (delta < prev_min_delta) {
-			prev_min_delta = delta;
-			min_delta_m = m;
-			min_delta_n = n;
-		}
-
-		pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
-			 clk_name, m, n, new_rate);
-
-		if (delta == 0)
-			break;
-	}
-
-	if (prev_min_delta == LONG_MAX) {
-		pr_debug("clock: %s: cannot round to rate %lu\n",
-			 clk_name, target_rate);
-		return ~0;
-	}
-
-	dd->last_rounded_m = min_delta_m;
-	dd->last_rounded_n = min_delta_n;
-	dd->last_rounded_rate = target_rate - prev_min_delta;
-
-	return dd->last_rounded_rate;
-}
-
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
deleted file mode 100644
index 55eb579ae..000000000
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * OMAP2/3 interface clock control
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-
-/* Register offsets */
-#define CM_AUTOIDLE			0x30
-#define CM_ICLKEN			0x10
-
-/* Private functions */
-
-/* XXX */
-void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
-{
-	u32 v;
-	void __iomem *r;
-
-	r = (__force void __iomem *)
-		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
-	v = omap2_clk_readl(clk, r);
-	v |= (1 << clk->enable_bit);
-	omap2_clk_writel(v, clk, r);
-}
-
-/* XXX */
-void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
-{
-	u32 v;
-	void __iomem *r;
-
-	r = (__force void __iomem *)
-		((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
-	v = omap2_clk_readl(clk, r);
-	v &= ~(1 << clk->enable_bit);
-	omap2_clk_writel(v, clk, r);
-}
-
-/* Public data */
-
-const struct clk_hw_omap_ops clkhwops_iclk = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
-
-const struct clk_hw_omap_ops clkhwops_iclk_wait = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-	.find_idlest	= omap2_clk_dflt_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-
-
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a699d7169..d05812587 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -20,12 +20,11 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <linux/regmap.h>
 #include <linux/of_address.h>
-#include <linux/bootmem.h>
 #include <asm/cpu.h>
 
 #include <trace/events/power.h>
@@ -40,19 +39,8 @@
 #include "cm-regbits-34xx.h"
 #include "common.h"
 
-/*
- * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
- * for a module to indicate that it is no longer in idle
- */
-#define MAX_MODULE_ENABLE_WAIT		100000
-
 u16 cpu_mask;
 
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
 /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
 #define OMAP3430_DPLL_FINT_BAND1_MIN	750000
 #define OMAP3430_DPLL_FINT_BAND1_MAX	2100000
@@ -66,119 +54,24 @@ struct ti_clk_features ti_clk_features;
 #define OMAP3PLUS_DPLL_FINT_MIN		32000
 #define OMAP3PLUS_DPLL_FINT_MAX		52000000
 
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
-static LIST_HEAD(clk_hw_omap_clocks);
-
-struct clk_iomap {
-	struct regmap *regmap;
-	void __iomem *mem;
-};
-
-static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
-
-static void clk_memmap_writel(u32 val, void __iomem *reg)
-{
-	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
-	struct clk_iomap *io = clk_memmaps[r->index];
-
-	if (io->regmap)
-		regmap_write(io->regmap, r->offset, val);
-	else
-		writel_relaxed(val, io->mem + r->offset);
-}
-
-static u32 clk_memmap_readl(void __iomem *reg)
-{
-	u32 val;
-	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
-	struct clk_iomap *io = clk_memmaps[r->index];
-
-	if (io->regmap)
-		regmap_read(io->regmap, r->offset, &val);
-	else
-		val = readl_relaxed(io->mem + r->offset);
-
-	return val;
-}
-
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
-{
-	if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
-		writel_relaxed(val, reg);
-	else
-		clk_memmap_writel(val, reg);
-}
-
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
-{
-	if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
-		return readl_relaxed(reg);
-	else
-		return clk_memmap_readl(reg);
-}
-
 static struct ti_clk_ll_ops omap_clk_ll_ops = {
-	.clk_readl = clk_memmap_readl,
-	.clk_writel = clk_memmap_writel,
+	.clkdm_clk_enable = clkdm_clk_enable,
+	.clkdm_clk_disable = clkdm_clk_disable,
+	.cm_wait_module_ready = omap_cm_wait_module_ready,
+	.cm_split_idlest_reg = cm_split_idlest_reg,
 };
 
 /**
- * omap2_clk_provider_init - initialize a clock provider
- * @match_table: DT device table to match for devices to init
- * @np: device node pointer for the this clock provider
- * @index: index for the clock provider
- + @syscon: syscon regmap pointer
- * @mem: iomem pointer for the clock provider memory area, only used if
- *	 syscon is not provided
+ * omap2_clk_setup_ll_ops - setup clock driver low-level ops
  *
- * Initializes a clock provider module (CM/PRM etc.), registering
- * the memory mapping at specified index and initializing the
- * low level driver infrastructure. Returns 0 in success.
+ * Sets up clock driver low-level platform ops. These are needed
+ * for register accesses and various other misc platform operations.
+ * Returns 0 on success, -EBUSY if low level ops have been registered
+ * already.
  */
-int __init omap2_clk_provider_init(struct device_node *np, int index,
-				   struct regmap *syscon, void __iomem *mem)
+int __init omap2_clk_setup_ll_ops(void)
 {
-	struct clk_iomap *io;
-
-	ti_clk_ll_ops = &omap_clk_ll_ops;
-
-	io = kzalloc(sizeof(*io), GFP_KERNEL);
-
-	io->regmap = syscon;
-	io->mem = mem;
-
-	clk_memmaps[index] = io;
-
-	ti_dt_clk_init_provider(np, index);
-
-	return 0;
-}
-
-/**
- * omap2_clk_legacy_provider_init - initialize a legacy clock provider
- * @index: index for the clock provider
- * @mem: iomem pointer for the clock provider memory area
- *
- * Initializes a legacy clock provider memory mapping.
- */
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
-{
-	struct clk_iomap *io;
-
-	ti_clk_ll_ops = &omap_clk_ll_ops;
-
-	io = memblock_virt_alloc(sizeof(*io), 0);
-
-	io->mem = mem;
-
-	clk_memmaps[index] = io;
+	return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
 }
 
 /*
@@ -187,77 +80,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
 
 /* Private functions */
 
-
-/**
- * _wait_idlest_generic - wait for a module to leave the idle state
- * @clk: module clock to wait for (needed for register offsets)
- * @reg: virtual address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Wait for a module to leave idle, where its idle-status register is
- * not inside the CM module.  Returns 1 if the module left idle
- * promptly, or 0 if the module did not leave idle before the timeout
- * elapsed.  XXX Deprecated - should be moved into drivers for the
- * individual IP block that the IDLEST register exists in.
- */
-static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
-				u32 mask, u8 idlest, const char *name)
-{
-	int i = 0, ena = 0;
-
-	ena = (idlest) ? 0 : mask;
-
-	omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena),
-			  MAX_MODULE_ENABLE_WAIT, i);
-
-	if (i < MAX_MODULE_ENABLE_WAIT)
-		pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
-			 name, i);
-	else
-		pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
-		       name, MAX_MODULE_ENABLE_WAIT);
-
-	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-/**
- * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE).  This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code.  No return value.
- */
-static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
-{
-	void __iomem *companion_reg, *idlest_reg;
-	u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
-	s16 prcm_mod;
-	int r;
-
-	/* Not all modules have multiple clocks that their IDLEST depends on */
-	if (clk->ops->find_companion) {
-		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit)))
-			return;
-	}
-
-	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
-	r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
-	if (r) {
-		/* IDLEST register not in the CM module */
-		_wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
-				     idlest_val, __clk_get_name(clk->hw.clk));
-	} else {
-		omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
-					  idlest_bit);
-	};
-}
-
 /* Public functions */
 
 /**
@@ -290,279 +112,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 	}
 }
 
-/**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init().  No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
-	clkdm_control = false;
-}
-
-/**
- * omap2_clk_dflt_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Note: We don't need special code here for INVERT_ENABLE for the
- * time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
- *
- * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes it's
- * just a matter of XORing the bits.
- *
- * Some clocks don't have companion clocks.  For example, modules with
- * only an interface clock (such as MAILBOXES) don't have a companion
- * clock.  Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active.  Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts.  No return value.
- */
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
-			void __iomem **other_reg, u8 *other_bit)
-{
-	u32 r;
-
-	/*
-	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
-	 * it's just a matter of XORing the bits.
-	 */
-	r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
-
-	*other_reg = (__force void __iomem *)r;
-	*other_bit = clk->enable_bit;
-}
-
-/**
- * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
- * @clk: struct clk * to find IDLEST info for
- * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
- * @idlest_val: u8 * to return the idle status indicator
- *
- * Return the CM_IDLEST register address and bit shift corresponding
- * to the module that "owns" this clock.  This default code assumes
- * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
- * the IDLEST register address ID corresponds to the CM_*CLKEN
- * register address ID (e.g., that CM_FCLKEN2 corresponds to
- * CM_IDLEST2).  This is not true for all modules.  No return value.
- */
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
-		void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = clk->enable_bit;
-
-	/*
-	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
-	 * 34xx reverses this, just to keep us on our toes
-	 * AM35xx uses both, depending on the module.
-	 */
-	*idlest_val = ti_clk_features.cm_idlest_val;
-}
-
-/**
- * omap2_dflt_clk_enable - enable a clock in the hardware
- * @hw: struct clk_hw * of the clock to enable
- *
- * Enable the clock @hw in the hardware.  We first call into the OMAP
- * clockdomain code to "enable" the corresponding clockdomain if this
- * is the first enabled user of the clockdomain.  Then program the
- * hardware to enable the clock.  Then wait for the IP block that uses
- * this clock to leave idle (if applicable).  Returns the error value
- * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
- * if @hw has a null clock enable_reg, or zero upon success.
- */
-int omap2_dflt_clk_enable(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-	u32 v;
-	int ret = 0;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (clkdm_control && clk->clkdm) {
-		ret = clkdm_clk_enable(clk->clkdm, hw->clk);
-		if (ret) {
-			WARN(1, "%s: could not enable %s's clockdomain %s: %d\n",
-			     __func__, __clk_get_name(hw->clk),
-			     clk->clkdm->name, ret);
-			return ret;
-		}
-	}
-
-	if (unlikely(clk->enable_reg == NULL)) {
-		pr_err("%s: %s missing enable_reg\n", __func__,
-		       __clk_get_name(hw->clk));
-		ret = -EINVAL;
-		goto err;
-	}
-
-	/* FIXME should not have INVERT_ENABLE bit here */
-	v = omap2_clk_readl(clk, clk->enable_reg);
-	if (clk->flags & INVERT_ENABLE)
-		v &= ~(1 << clk->enable_bit);
-	else
-		v |= (1 << clk->enable_bit);
-	omap2_clk_writel(v, clk, clk->enable_reg);
-	v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */
-
-	if (clk->ops && clk->ops->find_idlest)
-		_omap2_module_wait_ready(clk);
-
-	return 0;
-
-err:
-	if (clkdm_control && clk->clkdm)
-		clkdm_clk_disable(clk->clkdm, hw->clk);
-	return ret;
-}
-
-/**
- * omap2_dflt_clk_disable - disable a clock in the hardware
- * @hw: struct clk_hw * of the clock to disable
- *
- * Disable the clock @hw in the hardware, and call into the OMAP
- * clockdomain code to "disable" the corresponding clockdomain if all
- * clocks/hwmods in that clockdomain are now disabled.  No return
- * value.
- */
-void omap2_dflt_clk_disable(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-	u32 v;
-
-	clk = to_clk_hw_omap(hw);
-	if (!clk->enable_reg) {
-		/*
-		 * 'independent' here refers to a clock which is not
-		 * controlled by its parent.
-		 */
-		pr_err("%s: independent clock %s has no enable_reg\n",
-		       __func__, __clk_get_name(hw->clk));
-		return;
-	}
-
-	v = omap2_clk_readl(clk, clk->enable_reg);
-	if (clk->flags & INVERT_ENABLE)
-		v |= (1 << clk->enable_bit);
-	else
-		v &= ~(1 << clk->enable_bit);
-	omap2_clk_writel(v, clk, clk->enable_reg);
-	/* No OCP barrier needed here since it is a disable operation */
-
-	if (clkdm_control && clk->clkdm)
-		clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-/**
- * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being enabled
- *
- * Increment the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 1, the clockdomain will be "enabled."
- * Only needed for clocks that don't use omap2_dflt_clk_enable() as
- * their enable function pointer.  Passes along the return value of
- * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
- * clockdomain, or 0 if clock framework-based clockdomain control is
- * not implemented.
- */
-int omap2_clkops_enable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-	int ret = 0;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return -EINVAL;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (!clkdm_control) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return 0;
-	}
-
-	ret = clkdm_clk_enable(clk->clkdm, hw->clk);
-	WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
-	     __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret);
-
-	return ret;
-}
-
-/**
- * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being disabled
- *
- * Decrement the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 0, the clockdomain will be "disabled."
- * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
- * disable function pointer.  No return value.
- */
-void omap2_clkops_disable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (!clkdm_control) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return;
-	}
-
-	clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-/**
- * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
- * @hw: struct clk_hw * to check
- *
- * Return 1 if the clock represented by @hw is enabled in the
- * hardware, or 0 otherwise.  Intended for use in the struct
- * clk_ops.is_enabled function pointer.
- */
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 v;
-
-	v = omap2_clk_readl(clk, clk->enable_reg);
-
-	if (clk->flags & INVERT_ENABLE)
-		v ^= BIT(clk->enable_bit);
-
-	v &= BIT(clk->enable_bit);
-
-	return v ? 1 : 0;
-}
-
 static int __initdata mpurate;
 
 /*
@@ -584,178 +133,6 @@ static int __init omap_clk_setup(char *str)
 __setup("mpurate=", omap_clk_setup);
 
 /**
- * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
- * @clk: struct clk * to initialize
- *
- * Add an OMAP clock @clk to the internal list of OMAP clocks.  Used
- * temporarily for autoidle handling, until this support can be
- * integrated into the common clock framework code in some way.  No
- * return value.
- */
-void omap2_init_clk_hw_omap_clocks(struct clk *clk)
-{
-	struct clk_hw_omap *c;
-
-	if (__clk_get_flags(clk) & CLK_IS_BASIC)
-		return;
-
-	c = to_clk_hw_omap(__clk_get_hw(clk));
-	list_add(&c->node, &clk_hw_omap_clocks);
-}
-
-/**
- * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
- * support it
- *
- * Enable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them.  This function is intended
- * to be temporary until support for this is added to the common clock
- * code.  Returns 0.
- */
-int omap2_clk_enable_autoidle_all(void)
-{
-	struct clk_hw_omap *c;
-
-	list_for_each_entry(c, &clk_hw_omap_clocks, node)
-		if (c->ops && c->ops->allow_idle)
-			c->ops->allow_idle(c);
-
-	of_ti_clk_allow_autoidle_all();
-
-	return 0;
-}
-
-/**
- * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
- * support it
- *
- * Disable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them.  This function is intended
- * to be temporary until support for this is added to the common clock
- * code.  Returns 0.
- */
-int omap2_clk_disable_autoidle_all(void)
-{
-	struct clk_hw_omap *c;
-
-	list_for_each_entry(c, &clk_hw_omap_clocks, node)
-		if (c->ops && c->ops->deny_idle)
-			c->ops->deny_idle(c);
-
-	of_ti_clk_deny_autoidle_all();
-
-	return 0;
-}
-
-/**
- * omap2_clk_deny_idle - disable autoidle on an OMAP clock
- * @clk: struct clk * to disable autoidle for
- *
- * Disable autoidle on an OMAP clock.
- */
-int omap2_clk_deny_idle(struct clk *clk)
-{
-	struct clk_hw_omap *c;
-
-	if (__clk_get_flags(clk) & CLK_IS_BASIC)
-		return -EINVAL;
-
-	c = to_clk_hw_omap(__clk_get_hw(clk));
-	if (c->ops && c->ops->deny_idle)
-		c->ops->deny_idle(c);
-	return 0;
-}
-
-/**
- * omap2_clk_allow_idle - enable autoidle on an OMAP clock
- * @clk: struct clk * to enable autoidle for
- *
- * Enable autoidle on an OMAP clock.
- */
-int omap2_clk_allow_idle(struct clk *clk)
-{
-	struct clk_hw_omap *c;
-
-	if (__clk_get_flags(clk) & CLK_IS_BASIC)
-		return -EINVAL;
-
-	c = to_clk_hw_omap(__clk_get_hw(clk));
-	if (c->ops && c->ops->allow_idle)
-		c->ops->allow_idle(c);
-	return 0;
-}
-
-/**
- * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
- * @clk_names: ptr to an array of strings of clock names to enable
- * @num_clocks: number of clock names in @clk_names
- *
- * Prepare and enable a list of clocks, named by @clk_names.  No
- * return value. XXX Deprecated; only needed until these clocks are
- * properly claimed and enabled by the drivers or core code that uses
- * them.  XXX What code disables & calls clk_put on these clocks?
- */
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
-{
-	struct clk *init_clk;
-	int i;
-
-	for (i = 0; i < num_clocks; i++) {
-		init_clk = clk_get(NULL, clk_names[i]);
-		if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
-				clk_names[i]))
-			continue;
-		clk_prepare_enable(init_clk);
-	}
-}
-
-const struct clk_hw_omap_ops clkhwops_wait = {
-	.find_idlest	= omap2_clk_dflt_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
- * @mpurate_ck_name: clk name of the clock to change rate
- *
- * Change the ARM MPU clock rate to the rate specified on the command
- * line, if one was specified.  @mpurate_ck_name should be
- * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
- * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
- * handled by the virt_prcm_set clock, but this should be handled by
- * the OPP layer.  XXX This is intended to be handled by the OPP layer
- * code in the near future and should be removed from the clock code.
- * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
- * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
- * cannot be found, or 0 upon success.
- */
-int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
-{
-	struct clk *mpurate_ck;
-	int r;
-
-	if (!mpurate)
-		return -EINVAL;
-
-	mpurate_ck = clk_get(NULL, mpurate_ck_name);
-	if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
-		return -ENOENT;
-
-	r = clk_set_rate(mpurate_ck, mpurate);
-	if (r < 0) {
-		WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
-		     mpurate_ck_name, mpurate, r);
-		clk_put(mpurate_ck);
-		return -EINVAL;
-	}
-
-	calibrate_delay();
-	clk_put(mpurate_ck);
-
-	return 0;
-}
-
-/**
  * omap2_clk_print_new_rates - print summary of current clock tree rates
  * @hfclkin_ck_name: clk name for the off-chip HF oscillator
  * @core_ck_name: clk name for the on-chip CORE_CLK
@@ -801,29 +178,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
  */
 void __init ti_clk_init_features(void)
 {
+	struct ti_clk_features features = { 0 };
 	/* Fint setup for DPLLs */
 	if (cpu_is_omap3430()) {
-		ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
-		ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
-		ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
-		ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+		features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+		features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+		features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+		features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
 	} else {
-		ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
-		ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+		features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+		features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
 	}
 
 	/* Bypass value setup for DPLLs */
 	if (cpu_is_omap24xx()) {
-		ti_clk_features.dpll_bypass_vals |=
+		features.dpll_bypass_vals |=
 			(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
 			(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
 	} else if (cpu_is_omap34xx()) {
-		ti_clk_features.dpll_bypass_vals |=
+		features.dpll_bypass_vals |=
 			(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
 			(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
 	} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
 		   soc_is_omap54xx() || soc_is_dra7xx()) {
-		ti_clk_features.dpll_bypass_vals |=
+		features.dpll_bypass_vals |=
 			(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
 			(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
 			(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
@@ -831,7 +209,7 @@ void __init ti_clk_init_features(void)
 
 	/* Jitter correction only available on OMAP343X */
 	if (cpu_is_omap343x())
-		ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+		features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
 
 	/* Idlest value for interface clocks.
 	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
@@ -839,11 +217,17 @@ void __init ti_clk_init_features(void)
 	 * AM35xx uses both, depending on the module.
 	 */
 	if (cpu_is_omap24xx())
-		ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+		features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
 	else if (cpu_is_omap34xx())
-		ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+		features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
 
 	/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
 	if (omap_rev() == OMAP3430_REV_ES1_0)
-		ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+		features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+	/* Errata I810 for omap5 / dra7 */
+	if (soc_is_omap54xx() || soc_is_dra7xx())
+		features.flags |= TI_CLK_ERRATA_I810;
+
+	ti_clk_setup_features(&features);
 }
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 652ed0ab8..67da640ba 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -23,90 +23,6 @@
 #include <linux/clk-provider.h>
 #include <linux/clk/ti.h>
 
-struct omap_clk {
-	u16				cpu;
-	struct clk_lookup		lk;
-};
-
-#define CLK(dev, con, ck)		\
-	{				\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-struct clockdomain;
-
-#define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)	\
-	static struct clk_core _name##_core = {			\
-		.name = #_name,					\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _parent_array_name,		\
-		.num_parents = ARRAY_SIZE(_parent_array_name),	\
-		.ops = &_clkops_name,				\
-	};							\
-	static struct clk _name = {				\
-		.core = &_name##_core,				\
-	};
-
-#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name,	\
-				_clkops_name, _flags)		\
-	static struct clk_core _name##_core = {			\
-		.name = #_name,					\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _parent_array_name,		\
-		.num_parents = ARRAY_SIZE(_parent_array_name),	\
-		.ops = &_clkops_name,				\
-		.flags = _flags,				\
-	};							\
-	static struct clk _name = {				\
-		.core = &_name##_core,				\
-	};
-
-#define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name)		\
-	static struct clk_hw_omap _name##_hw = {		\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.clkdm_name = _clkdm_name,			\
-	};
-
-#define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel,	\
-			    _clksel_reg, _clksel_mask,		\
-			    _parent_names, _ops)		\
-	static struct clk _name;				\
-	static struct clk_hw_omap _name##_hw = {		\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.clksel		= _clksel,			\
-		.clksel_reg	= _clksel_reg,			\
-		.clksel_mask	= _clksel_mask,			\
-		.clkdm_name	= _clkdm_name,			\
-	};							\
-	DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
-#define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel,	\
-				 _clksel_reg, _clksel_mask,	\
-				 _enable_reg, _enable_bit,	\
-				 _hwops, _parent_names, _ops)	\
-	static struct clk _name;				\
-	static struct clk_hw_omap _name##_hw = {		\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.ops		= _hwops,			\
-		.enable_reg	= _enable_reg,			\
-		.enable_bit	= _enable_bit,			\
-		.clksel		= _clksel,			\
-		.clksel_reg	= _clksel_reg,			\
-		.clksel_mask	= _clksel_mask,			\
-		.clkdm_name	= _clkdm_name,			\
-	};							\
-	DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
 /* struct clksel_rate.flags possibilities */
 #define RATE_IN_242X		(1 << 0)
 #define RATE_IN_243X		(1 << 1)
@@ -127,38 +43,6 @@ struct clockdomain;
 /* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
 #define RATE_IN_3430ES2PLUS_36XX	(RATE_IN_3430ES2PLUS | RATE_IN_36XX)
 
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
-	u32			val;
-	u8			div;
-	u16			flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
-	struct clk		 *parent;
-	const struct clksel_rate *rates;
-};
-
 /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
 #define CORE_CLK_SRC_32K		0x0
 #define CORE_CLK_SRC_DPLL		0x1
@@ -180,105 +64,18 @@ struct clksel {
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
-
-void __init omap2_clk_disable_clkdm_control(void);
-
-/* clkt_clksel.c public functions */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
-				unsigned long target_rate,
-				u32 *new_div);
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw);
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
-				unsigned long *parent_rate);
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate);
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-
-/* clkt_iclk.c public functions */
-extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
-extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
-				   void __iomem **other_reg,
-				   u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
-				void __iomem **idlest_reg,
-				u8 *idlest_bit, u8 *idlest_val);
-int omap2_clk_enable_autoidle_all(void);
-int omap2_clk_allow_idle(struct clk *clk);
-int omap2_clk_deny_idle(struct clk *clk);
-int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
 
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg);
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
-
 extern u16 cpu_mask;
 
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
-	u32 flags;
-	long fint_min;
-	long fint_max;
-	long fint_band1_max;
-	long fint_band2_min;
-	u8 dpll_bypass_vals;
-	u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL		(1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM	(1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
 extern const struct clkops clkops_omap2_dflt_wait;
 extern const struct clkops clkops_omap2_dflt;
 
 extern struct clk_functions omap2_clk_functions;
 
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
-extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_apll54;
-extern const struct clk_hw_omap_ops clkhwops_apll96;
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-extern const struct clksel_rate div_1_0_rates[];
-extern const struct clksel_rate div3_1to4_rates[];
-extern const struct clksel_rate div_1_1_rates[];
-extern const struct clksel_rate div_1_2_rates[];
-extern const struct clksel_rate div_1_3_rates[];
-extern const struct clksel_rate div_1_4_rates[];
-extern const struct clksel_rate div31_1to31_rates[];
-
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
-struct regmap;
-
-int __init omap2_clk_provider_init(struct device_node *np, int index,
-				   struct regmap *syscon, void __iomem *mem);
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+int __init omap2_clk_setup_ll_ops(void);
 
 void __init ti_clk_init_features(void);
 #endif
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
deleted file mode 100644
index cef0c8d1d..000000000
--- a/arch/arm/mach-omap2/clock2430.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * clock2430.c - OMAP2430-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules.  No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
-					   void __iomem **idlest_reg,
-					   u8 *idlest_bit,
-					   u8 *idlest_val)
-{
-	*idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
-	*idlest_bit = clk->enable_bit;
-	*idlest_val = OMAP24XX_CM_IDLEST_VAL;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
-	.find_idlest	= omap2430_clk_i2chs_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
deleted file mode 100644
index b870f6a9e..000000000
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * clock2xxx.c - OMAP2xxx-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-
-struct clk_hw *dclk_hw;
-/*
- * Omap24xx specific clock functions
- */
-
-/*
- * Switch the MPU rate if specified on cmdline.  We cannot do this
- * early until cmdline is parsed.  XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap2xxx_clk_arch_init(void)
-{
-	int ret;
-
-	if (!cpu_is_omap24xx())
-		return 0;
-
-	ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
-	if (!ret)
-		omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
-
-	return ret;
-}
-
-omap_arch_initcall(omap2xxx_clk_arch_init);
-
-
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
deleted file mode 100644
index 4596468e5..000000000
--- a/arch/arm/mach-omap2/clock34xx.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock34xx.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/**
- * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
- * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
- * @idlest_reg and @idlest_bit.  No return value.
- */
-static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit,
-					    u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
-	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
- * target IDLEST bits.  For our purposes, we are concerned with the
- * target IDLEST bits, which exist at a different bit position than
- * the *CLKEN bit position for these modules (DSS and USBHOST) (The
- * default find_idlest code assumes that they are at the same
- * position.)  No return value.
- */
-static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
-						    void __iomem **idlest_reg,
-						    u8 *idlest_bit,
-						    u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	/* USBHOST_IDLE has same shift */
-	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
-	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
- * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
- * @idlest_reg and @idlest_bit.  No return value.
- */
-static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
-						 void __iomem **idlest_reg,
-						 u8 *idlest_bit,
-						 u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
-	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
deleted file mode 100644
index 084ba71b2..000000000
--- a/arch/arm/mach-omap2/clock34xx.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * OMAP34xx clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-
-extern const struct clkops clkops_omap3430es2_ssi_wait;
-extern const struct clkops clkops_omap3430es2_iclk_ssi_wait;
-extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait;
-
-#endif
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
deleted file mode 100644
index 4d79ae2c0..000000000
--- a/arch/arm/mach-omap2/clock3517.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * OMAP3517/3505-specific clock framework functions
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2011 Nokia Corporation
- *
- * Ranjith Lohithakshan
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3517.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
- * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
- * at an offset of 4 from ICK enable bit.
- */
-#define AM35XX_IPSS_ICK_MASK			0xF
-#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 		0x4
-#define AM35XX_IPSS_ICK_FCK_OFFSET		0x8
-#define AM35XX_IPSS_CLK_IDLEST_VAL		0
-
-/**
- * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The interface clocks on AM35xx IPSS reflects the clock idle status
- * in the enable register itsel at a bit offset of 4 from the enable
- * bit. A value of 1 indicates that clock is enabled.
- */
-static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit,
-					    u8 *idlest_val)
-{
-	*idlest_reg = (__force void __iomem *)(clk->enable_reg);
-	*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
-	*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
-}
-
-/**
- * am35xx_clk_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Some clocks don't have companion clocks.  For example, modules with
- * only an interface clock (such as HECC) don't have a companion
- * clock.  Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active.  Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts.  No return value.
- */
-static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
-				      void __iomem **other_reg,
-				      u8 *other_bit)
-{
-	*other_reg = (__force void __iomem *)(clk->enable_reg);
-	if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
-		*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
-	else
-		*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
-}
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
-	.find_idlest	= am35xx_clk_find_idlest,
-	.find_companion	= am35xx_clk_find_companion,
-};
-
-/**
- * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The IPSS target CM_IDLEST bit is at a different shift from the
- * CM_{I,F}CLKEN bit.  Pass back the correct info via @idlest_reg
- * and @idlest_bit.  No return value.
- */
-static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit,
-					    u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = AM35XX_ST_IPSS_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-	.find_idlest	= am35xx_clk_ipss_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
diff --git a/arch/arm/mach-omap2/clock3517.h b/arch/arm/mach-omap2/clock3517.h
deleted file mode 100644
index ca5e5a64c..000000000
--- a/arch/arm/mach-omap2/clock3517.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * OMAP3517/3505 clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-
-extern const struct clkops clkops_am35xx_ipss_module_wait;
-extern const struct clkops clkops_am35xx_ipss_wait;
-
-#endif
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
deleted file mode 100644
index 91ccb962e..000000000
--- a/arch/arm/mach-omap2/clock36xx.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * OMAP36xx-specific clkops
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Mike Turquette
- * Vijaykumar GN
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock36xx.h"
-#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
-
-/**
- * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
- *         from HSDivider PWRDN problem Implements Errata ID: i556.
- * @clk: DPLL output struct clk
- *
- * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
- * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
- * valueafter their respective PWRDN bits are set.  Any dummy write
- * (Any other value different from the Read value) to the
- * corresponding CM_CLKSEL register will refresh the dividers.
- */
-int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
-{
-	struct clk_divider *parent;
-	struct clk_hw *parent_hw;
-	u32 dummy_v, orig_v;
-	struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
-	int ret;
-
-	/* Clear PWRDN bit of HSDIVIDER */
-	ret = omap2_dflt_clk_enable(clk);
-
-	parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
-	parent = to_clk_divider(parent_hw);
-
-	/* Restore the dividers */
-	if (!ret) {
-		orig_v = omap2_clk_readl(omap_clk, parent->reg);
-		dummy_v = orig_v;
-
-		/* Write any other value different from the Read value */
-		dummy_v ^= (1 << parent->shift);
-		omap2_clk_writel(dummy_v, omap_clk, parent->reg);
-
-		/* Write the original divider */
-		omap2_clk_writel(orig_v, omap_clk, parent->reg);
-	}
-
-	return ret;
-}
diff --git a/arch/arm/mach-omap2/clock36xx.h b/arch/arm/mach-omap2/clock36xx.h
deleted file mode 100644
index 945bb7f08..000000000
--- a/arch/arm/mach-omap2/clock36xx.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * OMAP36xx clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-
-extern int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *hw);
-
-#endif
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
deleted file mode 100644
index a9e86db5d..000000000
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST		120000000
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
-/**
- * omap3_dpll4_set_rate - set rate for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- *
- * Check if the current SoC supports the per-dpll reprogram operation
- * or not, and then do the rate change if supported. Returns -EINVAL
- * if not supported, 0 for success, and potential error codes from the
- * clock rate change.
- */
-int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	/*
-	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
-	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
-	 * on DPLL4.
-	 */
-	if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
-		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
-		return -EINVAL;
-	}
-
-	return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-}
-
-/**
- * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- * @index: parent index, 0 - reference clock, 1 - bypass clock
- *
- * Check if the current SoC support the per-dpll reprogram operation
- * or not, and then do the rate + parent change if supported. Returns
- * -EINVAL if not supported, 0 for success, and potential error codes
- * from the clock rate change.
- */
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
-				    unsigned long parent_rate, u8 index)
-{
-	if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
-		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
-		return -EINVAL;
-	}
-
-	return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
-						      index);
-}
-
-void __init omap3_clk_lock_dpll5(void)
-{
-	struct clk *dpll5_clk;
-	struct clk *dpll5_m2_clk;
-
-	dpll5_clk = clk_get(NULL, "dpll5_ck");
-	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
-	clk_prepare_enable(dpll5_clk);
-
-	/* Program dpll5_m2_clk divider for no division */
-	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
-	clk_prepare_enable(dpll5_m2_clk);
-	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
-	clk_disable_unprepare(dpll5_m2_clk);
-	clk_disable_unprepare(dpll5_clk);
-	return;
-}
-
-/* Common clock code */
-
-/*
- * Switch the MPU rate if specified on cmdline.  We cannot do this
- * early until cmdline is parsed.  XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap3xxx_clk_arch_init(void)
-{
-	int ret;
-
-	if (!cpu_is_omap34xx())
-		return 0;
-
-	ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
-	if (!ret)
-		omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
-
-	return ret;
-}
-
-omap_arch_initcall(omap3xxx_clk_arch_init);
-
-
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
deleted file mode 100644
index 287a46f78..000000000
--- a/arch/arm/mach-omap2/clock44xx.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * OMAP4 clock function prototypes and macros
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-
-/*
- * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
- *    set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
- *    vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
- */
-#define OMAP4430_REGM4XEN_MULT	4
-
-int omap4xxx_clk_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
deleted file mode 100644
index 61b60dfb1..000000000
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap2/clock_common_data.c
- *
- *  Copyright (C) 2005-2009 Texas Instruments, Inc.
- *  Copyright (C) 2004-2009 Nokia Corporation
- *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
-	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	 { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
-	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	 { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
-	{ .div = 0 },
-};
-
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-
-const struct clksel_rate div_1_0_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div3_1to4_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div_1_1_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div_1_2_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div_1_3_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div_1_4_rates[] = {
-	{ .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
-
-const struct clksel_rate div31_1to31_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
-	{ .div = 0 },
-};
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 2da3b5ec0..b79b1ca9a 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -465,10 +465,7 @@ int clkdm_complete_init(void)
 		return -EACCES;
 
 	list_for_each_entry(clkdm, &clkdm_list, node) {
-		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-			clkdm_wakeup(clkdm);
-		else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO)
-			clkdm_deny_idle(clkdm);
+		clkdm_deny_idle(clkdm);
 
 		_resolve_clkdm_deps(clkdm, clkdm->wkdep_srcs);
 		clkdm_clear_all_wkdeps(clkdm);
@@ -925,11 +922,20 @@ void clkdm_allow_idle_nolock(struct clockdomain *clkdm)
 	if (!clkdm)
 		return;
 
-	if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
-		pr_debug("clock: %s: automatic idle transitions cannot be enabled\n",
-			 clkdm->name);
+	if (!WARN_ON(!clkdm->forcewake_count))
+		clkdm->forcewake_count--;
+
+	if (clkdm->forcewake_count)
+		return;
+
+	if (!clkdm->usecount && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+		clkdm_sleep_nolock(clkdm);
+
+	if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO))
+		return;
+
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)
 		return;
-	}
 
 	if (!arch_clkdm || !arch_clkdm->clkdm_allow_idle)
 		return;
@@ -974,11 +980,17 @@ void clkdm_deny_idle_nolock(struct clockdomain *clkdm)
 	if (!clkdm)
 		return;
 
-	if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
-		pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n",
-			 clkdm->name);
+	if (clkdm->forcewake_count++)
+		return;
+
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		clkdm_wakeup_nolock(clkdm);
+
+	if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO))
+		return;
+
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)
 		return;
-	}
 
 	if (!arch_clkdm || !arch_clkdm->clkdm_deny_idle)
 		return;
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 77bab5fb6..24667a5a9 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -114,6 +114,7 @@ struct omap_hwmod;
  * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
  * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
  * @usecount: Usecount tracking
+ * @forcewake_count: Usecount for forcing the domain active
  * @node: list_head to link all clockdomains together
  *
  * @prcm_partition should be a macro from mach-omap2/prcm44xx.h (OMAP4 only)
@@ -138,6 +139,7 @@ struct clockdomain {
 	struct clkdm_dep *wkdep_srcs;
 	struct clkdm_dep *sleepdep_srcs;
 	int usecount;
+	int forcewake_count;
 	struct list_head node;
 };
 
@@ -216,7 +218,8 @@ extern void __init omap242x_clockdomains_init(void);
 extern void __init omap243x_clockdomains_init(void);
 extern void __init omap3xxx_clockdomains_init(void);
 extern void __init am33xx_clockdomains_init(void);
-extern void __init ti81xx_clockdomains_init(void);
+extern void __init ti814x_clockdomains_init(void);
+extern void __init ti816x_clockdomains_init(void);
 extern void __init omap44xx_clockdomains_init(void);
 extern void __init omap54xx_clockdomains_init(void);
 extern void __init dra7xx_clockdomains_init(void);
diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
index 7581e036b..ef9ed36e8 100644
--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -461,7 +461,7 @@ static struct clockdomain ipu_7xx_clkdm = {
 	.cm_inst	  = DRA7XX_CM_CORE_AON_IPU_INST,
 	.clkdm_offs	  = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS,
 	.dep_bit	  = DRA7XX_IPU_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain mpu1_7xx_clkdm = {
diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c
index ce2a82001..3b5fb05ae 100644
--- a/arch/arm/mach-omap2/clockdomains81xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains81xx_data.c
@@ -83,6 +83,14 @@ static struct clockdomain mmu_cfg_81xx_clkdm = {
 	.flags		= CLKDM_CAN_SWSUP,
 };
 
+static struct clockdomain default_l3_slow_81xx_clkdm = {
+	.name		= "default_l3_slow_clkdm",
+	.pwrdm		= { .name = "default_pwrdm" },
+	.cm_inst	= TI81XX_CM_DEFAULT_MOD,
+	.clkdm_offs	= TI816X_CM_DEFAULT_L3_SLOW_CLKDM,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
 /* 816x only */
 
 static struct clockdomain alwon_mpu_816x_clkdm = {
@@ -96,7 +104,7 @@ static struct clockdomain alwon_mpu_816x_clkdm = {
 static struct clockdomain active_gem_816x_clkdm = {
 	.name		= "active_gem_clkdm",
 	.pwrdm		= { .name = "active_pwrdm" },
-	.cm_inst	= TI816X_CM_ACTIVE_MOD,
+	.cm_inst	= TI81XX_CM_ACTIVE_MOD,
 	.clkdm_offs	= TI816X_CM_ACTIVE_GEM_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
@@ -128,7 +136,7 @@ static struct clockdomain ivahd2_816x_clkdm = {
 static struct clockdomain sgx_816x_clkdm = {
 	.name		= "sgx_clkdm",
 	.pwrdm		= { .name = "sgx_pwrdm" },
-	.cm_inst	= TI816X_CM_SGX_MOD,
+	.cm_inst	= TI81XX_CM_SGX_MOD,
 	.clkdm_offs	= TI816X_CM_SGX_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
@@ -136,7 +144,7 @@ static struct clockdomain sgx_816x_clkdm = {
 static struct clockdomain default_l3_med_816x_clkdm = {
 	.name		= "default_l3_med_clkdm",
 	.pwrdm		= { .name = "default_pwrdm" },
-	.cm_inst	= TI816X_CM_DEFAULT_MOD,
+	.cm_inst	= TI81XX_CM_DEFAULT_MOD,
 	.clkdm_offs	= TI816X_CM_DEFAULT_L3_MED_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
@@ -144,7 +152,7 @@ static struct clockdomain default_l3_med_816x_clkdm = {
 static struct clockdomain default_ducati_816x_clkdm = {
 	.name		= "default_ducati_clkdm",
 	.pwrdm		= { .name = "default_pwrdm" },
-	.cm_inst	= TI816X_CM_DEFAULT_MOD,
+	.cm_inst	= TI81XX_CM_DEFAULT_MOD,
 	.clkdm_offs	= TI816X_CM_DEFAULT_DUCATI_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
@@ -152,20 +160,30 @@ static struct clockdomain default_ducati_816x_clkdm = {
 static struct clockdomain default_pci_816x_clkdm = {
 	.name		= "default_pci_clkdm",
 	.pwrdm		= { .name = "default_pwrdm" },
-	.cm_inst	= TI816X_CM_DEFAULT_MOD,
+	.cm_inst	= TI81XX_CM_DEFAULT_MOD,
 	.clkdm_offs	= TI816X_CM_DEFAULT_PCI_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
 
-static struct clockdomain default_l3_slow_816x_clkdm = {
-	.name		= "default_l3_slow_clkdm",
-	.pwrdm		= { .name = "default_pwrdm" },
-	.cm_inst	= TI816X_CM_DEFAULT_MOD,
-	.clkdm_offs	= TI816X_CM_DEFAULT_L3_SLOW_CLKDM,
-	.flags		= CLKDM_CAN_SWSUP,
+static struct clockdomain *clockdomains_ti814x[] __initdata = {
+	&alwon_l3_slow_81xx_clkdm,
+	&alwon_l3_med_81xx_clkdm,
+	&alwon_l3_fast_81xx_clkdm,
+	&alwon_ethernet_81xx_clkdm,
+	&mmu_81xx_clkdm,
+	&mmu_cfg_81xx_clkdm,
+	&default_l3_slow_81xx_clkdm,
+	NULL,
 };
 
-static struct clockdomain *clockdomains_ti81xx[] __initdata = {
+void __init ti814x_clockdomains_init(void)
+{
+	clkdm_register_platform_funcs(&am33xx_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_ti814x);
+	clkdm_complete_init();
+}
+
+static struct clockdomain *clockdomains_ti816x[] __initdata = {
 	&alwon_mpu_816x_clkdm,
 	&alwon_l3_slow_81xx_clkdm,
 	&alwon_l3_med_81xx_clkdm,
@@ -181,14 +199,14 @@ static struct clockdomain *clockdomains_ti81xx[] __initdata = {
 	&default_l3_med_816x_clkdm,
 	&default_ducati_816x_clkdm,
 	&default_pci_816x_clkdm,
-	&default_l3_slow_816x_clkdm,
+	&default_l3_slow_81xx_clkdm,
 	NULL,
 };
 
-void __init ti81xx_clockdomains_init(void)
+void __init ti816x_clockdomains_init(void)
 {
 	clkdm_register_platform_funcs(&am33xx_clkdm_operations);
-	clkdm_register_clkdms(clockdomains_ti81xx);
+	clkdm_register_clkdms(clockdomains_ti816x);
 	clkdm_complete_init();
 }
 #endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 7b181f929..6f2d0aec0 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -243,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
 				CLKCTRL_IDLEST_DISABLED),
 				MAX_MODULE_READY_TIME, i);
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index 187fa4386..d91ae8206 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -649,7 +649,7 @@ void omap3_cm_save_scratchpad_contents(u32 *ptr)
 	/*
 	 * As per erratum i671, ROM code does not respect the PER DPLL
 	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
-	 * Then,  in anycase, clear these bits to avoid extra latencies.
+	 * Then,  in any case, clear these bits to avoid extra latencies.
 	 */
 	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
 		~OMAP3430_AUTO_PERIPH_DPLL_MASK;
diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h
index 45cb407da..3a0ccf07c 100644
--- a/arch/arm/mach-omap2/cm81xx.h
+++ b/arch/arm/mach-omap2/cm81xx.h
@@ -18,15 +18,15 @@
 #define __ARCH_ARM_MACH_OMAP2_CM_TI81XX_H
 
 /* TI81XX common CM module offsets */
+#define TI81XX_CM_ACTIVE_MOD			0x0400	/* 256B */
+#define TI81XX_CM_DEFAULT_MOD			0x0500	/* 256B */
 #define TI81XX_CM_ALWON_MOD			0x1400	/* 1KB */
+#define TI81XX_CM_SGX_MOD			0x0900	/* 256B */
 
 /* TI816X CM module offsets */
-#define TI816X_CM_ACTIVE_MOD			0x0400	/* 256B */
-#define TI816X_CM_DEFAULT_MOD			0x0500	/* 256B */
 #define TI816X_CM_IVAHD0_MOD			0x0600	/* 256B */
 #define TI816X_CM_IVAHD1_MOD			0x0700	/* 256B */
 #define TI816X_CM_IVAHD2_MOD			0x0800	/* 256B */
-#define TI816X_CM_SGX_MOD			0x0900	/* 256B */
 
 /* ALWON */
 #define TI81XX_CM_ALWON_L3_SLOW_CLKDM		0x0000
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 2c0e07ed6..2ab27ade1 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
 			  MAX_MODULE_DISABLE_TIME, i);
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index eae6a0e87..484cdadfb 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -30,4 +30,5 @@ int __weak omap_secure_ram_reserve_memblock(void)
 void __init omap_reserve(void)
 {
 	omap_secure_ram_reserve_memblock();
+	omap_barrier_reserve_memblock();
 }
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index cf3cf22ec..deed42e1d 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -88,8 +88,7 @@ static inline int omap_mux_late_init(void)
 
 extern void omap2_init_common_infrastructure(void);
 
-extern void omap2_sync32k_timer_init(void);
-extern void omap3_sync32k_timer_init(void);
+extern void omap_init_time(void);
 extern void omap3_secure_sync32k_timer_init(void);
 extern void omap3_gptimer_timer_init(void);
 extern void omap4_local_timer_init(void);
@@ -189,6 +188,15 @@ static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd)
 }
 #endif
 
+#ifdef CONFIG_OMAP_INTERCONNECT_BARRIER
+void omap_barrier_reserve_memblock(void);
+void omap_barriers_init(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{
+}
+#endif
+
 /* This gets called from mach-omap2/io.c, do not call this */
 void __init omap2_set_globals_tap(u32 class, void __iomem *tap);
 
@@ -198,6 +206,7 @@ void __init omap3_map_io(void);
 void __init am33xx_map_io(void);
 void __init omap4_map_io(void);
 void __init omap5_map_io(void);
+void __init dra7xx_map_io(void);
 void __init ti81xx_map_io(void);
 
 /**
@@ -248,20 +257,24 @@ extern void gic_dist_enable(void);
 extern bool gic_dist_disabled(void);
 extern void gic_timer_retrigger(void);
 extern void omap_smc1(u32 fn, u32 arg);
+extern void omap4_sar_ram_init(void);
 extern void __iomem *omap4_get_sar_ram_base(void);
+extern void omap4_mpuss_early_init(void);
 extern void omap_do_wfi(void);
 
-#ifdef CONFIG_SMP
-/* Needed for secondary core boot */
 extern void omap4_secondary_startup(void);
 extern void omap4460_secondary_startup(void);
+
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
 extern void omap_auxcoreboot_addr(u32 cpu_addr);
 extern u32 omap_read_auxcoreboot0(void);
 
 extern void omap4_cpu_die(unsigned int cpu);
+extern int omap4_cpu_kill(unsigned int cpu);
 
-extern struct smp_operations omap4_smp_ops;
+extern const struct smp_operations omap4_smp_ops;
 
 extern void omap5_secondary_startup(void);
 extern void omap5_secondary_hyp_startup(void);
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index f00893027..1662071bb 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -36,7 +36,6 @@
 
 static void __iomem *omap2_ctrl_base;
 static s16 omap2_ctrl_offset;
-static struct regmap *omap2_ctrl_syscon;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 struct omap3_scratchpad {
@@ -166,16 +165,9 @@ u16 omap_ctrl_readw(u16 offset)
 
 u32 omap_ctrl_readl(u16 offset)
 {
-	u32 val;
-
 	offset &= 0xfffc;
-	if (!omap2_ctrl_syscon)
-		val = readl_relaxed(omap2_ctrl_base + offset);
-	else
-		regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
-			    &val);
 
-	return val;
+	return readl_relaxed(omap2_ctrl_base + offset);
 }
 
 void omap_ctrl_writeb(u8 val, u16 offset)
@@ -207,11 +199,7 @@ void omap_ctrl_writew(u16 val, u16 offset)
 void omap_ctrl_writel(u32 val, u16 offset)
 {
 	offset &= 0xfffc;
-	if (!omap2_ctrl_syscon)
-		writel_relaxed(val, omap2_ctrl_base + offset);
-	else
-		regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
-			     val);
+	writel_relaxed(val, omap2_ctrl_base + offset);
 }
 
 #ifdef CONFIG_ARCH_OMAP3
@@ -652,6 +640,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am4-scm", .data = &ctrl_data },
 	{ .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
 	{ .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
+	{ .compatible = "ti,dm814-scm", .data = &ctrl_data },
 	{ .compatible = "ti,dm816-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
 	{ .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
@@ -714,8 +703,6 @@ int __init omap_control_init(void)
 			if (IS_ERR(syscon))
 				return PTR_ERR(syscon);
 
-			omap2_ctrl_syscon = syscon;
-
 			if (of_get_child_by_name(scm_conf, "clocks")) {
 				ret = omap2_clk_provider_init(scm_conf,
 							      data->index,
@@ -723,9 +710,6 @@ int __init omap_control_init(void)
 				if (ret)
 					return ret;
 			}
-
-			iounmap(omap2_ctrl_base);
-			omap2_ctrl_base = NULL;
 		} else {
 			/* No scm_conf found, direct access */
 			ret = omap2_clk_provider_init(np, data->index, NULL,
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index aa7b379e2..2a3db0bd9 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -34,6 +34,7 @@
 #include "pm.h"
 #include "control.h"
 #include "common.h"
+#include "soc.h"
 
 /* Mach specific information to be recorded in the C-state driver_data */
 struct omap3_idle_statedata {
@@ -315,6 +316,69 @@ static struct cpuidle_driver omap3_idle_driver = {
 	.safe_state_index = 0,
 };
 
+/*
+ * Numbers based on measurements made in October 2009 for PM optimized kernel
+ * with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP,
+ * and worst case latencies).
+ */
+static struct cpuidle_driver omap3430_idle_driver = {
+	.name             = "omap3430_idle",
+	.owner            = THIS_MODULE,
+	.states = {
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 110 + 162,
+			.target_residency = 5,
+			.name		  = "C1",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 106 + 180,
+			.target_residency = 309,
+			.name		  = "C2",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 107 + 410,
+			.target_residency = 46057,
+			.name		  = "C3",
+			.desc		  = "MPU RET + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 121 + 3374,
+			.target_residency = 46057,
+			.name		  = "C4",
+			.desc		  = "MPU OFF + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 855 + 1146,
+			.target_residency = 46057,
+			.name		  = "C5",
+			.desc		  = "MPU RET + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 7580 + 4134,
+			.target_residency = 484329,
+			.name		  = "C6",
+			.desc		  = "MPU OFF + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 7505 + 15274,
+			.target_residency = 484329,
+			.name		  = "C7",
+			.desc		  = "MPU OFF + CORE OFF",
+		},
+	},
+	.state_count = ARRAY_SIZE(omap3_idle_data),
+	.safe_state_index = 0,
+};
+
 /* Public functions */
 
 /**
@@ -333,5 +397,8 @@ int __init omap3_idle_init(void)
 	if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
 		return -ENODEV;
 
-	return cpuidle_register(&omap3_idle_driver, NULL);
+	if (cpu_is_omap3430())
+		return cpuidle_register(&omap3430_idle_driver, NULL);
+	else
+		return cpuidle_register(&omap3_idle_driver, NULL);
 }
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 4b8e9f4d5..fa138d403 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -140,7 +140,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		    mpuss_can_lose_context)
 			gic_dist_disable();
 
-		clkdm_wakeup(cpu_clkdm[1]);
+		clkdm_deny_idle(cpu_clkdm[1]);
 		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
 		clkdm_allow_idle(cpu_clkdm[1]);
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index a69bd67e9..d7f1d69da 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -33,7 +32,6 @@
 #include "common.h"
 #include "mux.h"
 #include "control.h"
-#include "devices.h"
 #include "display.h"
 
 #define L3_MODULES_MAX_LEN 12
@@ -67,102 +65,8 @@ static int __init omap3_l3_init(void)
 }
 omap_postcore_initcall(omap3_l3_init);
 
-#if defined(CONFIG_IOMMU_API)
-
-#include <linux/platform_data/iommu-omap.h>
-
-static struct resource omap3isp_resources[] = {
-	{
-		.start		= OMAP3430_ISP_BASE,
-		.end		= OMAP3430_ISP_BASE + 0x12fc,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_BASE2,
-		.end		= OMAP3430_ISP_BASE2 + 0x0600,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 24 + OMAP_INTC_START,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device omap3isp_device = {
-	.name		= "omap3isp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap3isp_resources),
-	.resource	= omap3isp_resources,
-};
-
-static struct omap_iommu_arch_data omap3_isp_iommu = {
-	.name = "mmu_isp",
-};
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
-	if (of_have_populated_dt())
-		omap3_isp_iommu.name = "480bd400.mmu";
-
-	omap3isp_device.dev.platform_data = pdata;
-	omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
-
-	return platform_device_register(&omap3isp_device);
-}
-
-#else /* !CONFIG_IOMMU_API */
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
-	return 0;
-}
-
-#endif
-
-#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
-static inline void __init omap_init_mbox(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	struct omap_mbox_pdata *pdata;
-
-	oh = omap_hwmod_lookup("mailbox");
-	if (!oh) {
-		pr_err("%s: unable to find hwmod\n", __func__);
-		return;
-	}
-	if (!oh->dev_attr) {
-		pr_err("%s: hwmod doesn't have valid attrs\n", __func__);
-		return;
-	}
-
-	pdata = (struct omap_mbox_pdata *)oh->dev_attr;
-	pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata));
-	WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
-						__func__, PTR_ERR(pdev));
-}
-#else
-static inline void omap_init_mbox(void) { }
-#endif /* CONFIG_OMAP2PLUS_MBOX */
-
 static inline void omap_init_sti(void) {}
 
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
-
-static struct platform_device omap_pcm = {
-	.name	= "omap-pcm-audio",
-	.id	= -1,
-};
-
-static void omap_init_audio(void)
-{
-	platform_device_register(&omap_pcm);
-}
-
-#else
-static inline void omap_init_audio(void) {}
-#endif
-
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -292,14 +196,12 @@ static int __init omap2_init_devices(void)
 	if (!of_have_populated_dt())
 		pinctrl_provide_dummies();
 
-	/*
-	 * please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-	omap_init_audio();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
-		omap_init_mbox();
+		/*
+		 * please keep these calls, and their implementations above,
+		 * in alphabetical order so they're easier to sort through.
+		 */
 		omap_init_mcspi();
 		omap_init_sham();
 		omap_init_aes();
diff --git a/arch/arm/mach-omap2/devices.h b/arch/arm/mach-omap2/devices.h
deleted file mode 100644
index f61eb6e5d..000000000
--- a/arch/arm/mach-omap2/devices.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-omap2/devices.h
- *
- * OMAP2 platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H
-#define __ARCH_ARM_MACH_OMAP_DEVICES_H
-
-struct isp_platform_data;
-
-int omap3_init_camera(struct isp_platform_data *pdata);
-
-#endif
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 6ab13d18c..70b3eaf08 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -29,7 +29,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include "omap-pm.h"
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
index 7375854b1..78f253005 100644
--- a/arch/arm/mach-omap2/display.h
+++ b/arch/arm/mach-omap2/display.h
@@ -33,4 +33,9 @@ int omap_init_vout(void);
 
 struct device_node * __init omapdss_find_dss_of_node(void);
 
+struct omap_dss_board_info;
+
+/* Init with the board info */
+int omap_display_init(struct omap_dss_board_info *board_data);
+
 #endif
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 1ed4be184..e58c13a9b 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/of.h>
 #include <linux/omap-dma.h>
 
@@ -203,6 +204,108 @@ static unsigned configure_dma_errata(void)
 	return errata;
 }
 
+static const struct dma_slave_map omap24xx_sdma_map[] = {
+	{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
+	{ "omap-aes", "tx", SDMA_FILTER_PARAM(9) },
+	{ "omap-aes", "rx", SDMA_FILTER_PARAM(10) },
+	{ "omap-sham", "rx", SDMA_FILTER_PARAM(13) },
+	{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
+	{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
+	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
+	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
+	{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
+	{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
+	{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
+	{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
+	{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
+	{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
+	{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
+	{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
+	{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
+	{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
+	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
+	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
+	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
+	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
+	{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
+	{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
+	{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
+	{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
+	{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
+	{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
+	{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
+	{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
+	{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
+	{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
+	{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
+	{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
+	{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
+	{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
+	{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
+	{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
+	{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
+	{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
+	{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
+	{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
+	{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
+	{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
+};
+
+static const struct dma_slave_map omap3xxx_sdma_map[] = {
+	{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
+	{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
+	{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
+	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
+	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
+	{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
+	{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
+	{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
+	{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
+	{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
+	{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
+	{ "omap_i2c.3", "tx", SDMA_FILTER_PARAM(25) },
+	{ "omap_i2c.3", "rx", SDMA_FILTER_PARAM(26) },
+	{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
+	{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
+	{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
+	{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
+	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
+	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
+	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
+	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
+	{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
+	{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
+	{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
+	{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
+	{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
+	{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
+	{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
+	{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
+	{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
+	{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
+	{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
+	{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
+	{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
+	{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
+	{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
+	{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
+	{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
+	{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
+	{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
+	{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
+	{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
+	{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
+	{ "omap-aes", "tx", SDMA_FILTER_PARAM(65) },
+	{ "omap-aes", "rx", SDMA_FILTER_PARAM(66) },
+	{ "omap-sham", "rx", SDMA_FILTER_PARAM(69) },
+	{ "omap2_mcspi.3", "tx0", SDMA_FILTER_PARAM(70) },
+	{ "omap2_mcspi.3", "rx0", SDMA_FILTER_PARAM(71) },
+	{ "omap_hsmmc.2", "tx", SDMA_FILTER_PARAM(77) },
+	{ "omap_hsmmc.2", "rx", SDMA_FILTER_PARAM(78) },
+	{ "omap_uart.3", "tx", SDMA_FILTER_PARAM(81) },
+	{ "omap_uart.3", "rx", SDMA_FILTER_PARAM(82) },
+};
+
 static struct omap_system_dma_plat_info dma_plat_info __initdata = {
 	.reg_map	= reg_map,
 	.channel_stride	= 0x60,
@@ -231,6 +334,20 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 	p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
 	p.errata = configure_dma_errata();
 
+	if (!of_have_populated_dt()) {
+		if (soc_is_omap24xx()) {
+			p.slave_map = omap24xx_sdma_map;
+			p.slavecnt = ARRAY_SIZE(omap24xx_sdma_map);
+		} else if (soc_is_omap34xx() || soc_is_omap3630()) {
+			p.slave_map = omap3xxx_sdma_map;
+			p.slavecnt = ARRAY_SIZE(omap3xxx_sdma_map);
+		} else {
+			pr_err("%s: The legacy DMA map is not provided!\n",
+			       __func__);
+			return -ENODEV;
+		}
+	}
+
 	pdev = omap_device_build(name, 0, oh, &p, sizeof(p));
 	if (IS_ERR(pdev)) {
 		pr_err("%s: Can't build omap_device for %s:%s.\n",
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
deleted file mode 100644
index 44e57ec22..000000000
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- * OMAP3/4 - specific DPLL control functions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
- *
- * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
- * Menon
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/clkdev.h>
-
-#include "clockdomain.h"
-#include "clock.h"
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE			0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
-
-#define MAX_DPLL_WAIT_TRIES		1000000
-
-/* Private functions */
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	dd = clk->dpll_data;
-
-	v = omap2_clk_readl(clk, dd->control_reg);
-	v &= ~dd->enable_mask;
-	v |= clken_bits << __ffs(dd->enable_mask);
-	omap2_clk_writel(v, clk, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
-{
-	const struct dpll_data *dd;
-	int i = 0;
-	int ret = -EINVAL;
-	const char *clk_name;
-
-	dd = clk->dpll_data;
-	clk_name = __clk_get_name(clk->hw.clk);
-
-	state <<= __ffs(dd->idlest_mask);
-
-	while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask)
-		!= state) && i < MAX_DPLL_WAIT_TRIES) {
-		i++;
-		udelay(1);
-	}
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
-		       clk_name, (state) ? "locked" : "bypassed");
-	} else {
-		pr_debug("clock: %s transition to '%s' in %d loops\n",
-			 clk_name, (state) ? "locked" : "bypassed", i);
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
-{
-	unsigned long fint;
-	u16 f = 0;
-
-	fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
-
-	pr_debug("clock: fint is %lu\n", fint);
-
-	if (fint >= 750000 && fint <= 1000000)
-		f = 0x3;
-	else if (fint > 1000000 && fint <= 1250000)
-		f = 0x4;
-	else if (fint > 1250000 && fint <= 1500000)
-		f = 0x5;
-	else if (fint > 1500000 && fint <= 1750000)
-		f = 0x6;
-	else if (fint > 1750000 && fint <= 2100000)
-		f = 0x7;
-	else if (fint > 7500000 && fint <= 10000000)
-		f = 0xB;
-	else if (fint > 10000000 && fint <= 12500000)
-		f = 0xC;
-	else if (fint > 12500000 && fint <= 15000000)
-		f = 0xD;
-	else if (fint > 15000000 && fint <= 17500000)
-		f = 0xE;
-	else if (fint > 17500000 && fint <= 21000000)
-		f = 0xF;
-	else
-		pr_debug("clock: unknown freqsel setting for %d\n", n);
-
-	return f;
-}
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
- * readiness before returning.  Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code.  If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
-{
-	const struct dpll_data *dd;
-	u8 ai;
-	u8 state = 1;
-	int r = 0;
-
-	pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
-
-	dd = clk->dpll_data;
-	state <<= __ffs(dd->idlest_mask);
-
-	/* Check if already locked */
-	if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state)
-		goto done;
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	if (ai)
-		omap3_dpll_deny_idle(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
-	r = _omap3_wait_dpll_status(clk, 1);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-
-done:
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate.  Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code.  If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
-{
-	int r;
-	u8 ai;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
-		return -EINVAL;
-
-	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 __clk_get_name(clk->hw.clk));
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
-	r = _omap3_wait_dpll_status(clk, 0);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code.  If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
-{
-	u8 ai;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
-		return -EINVAL;
-
-	pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-
-	return 0;
-}
-
-/**
- * _lookup_dco - Lookup DCO used by j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @dco: digital control oscillator selector
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
-{
-	unsigned long fint, clkinp; /* watch out for overflow */
-
-	clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
-	fint = (clkinp / n) * m;
-
-	if (fint < 1000000000)
-		*dco = 2;
-	else
-		*dco = 4;
-}
-
-/**
- * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @sd_div: target sigma-delta divider
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
-{
-	unsigned long clkinp, sd; /* watch out for overflow */
-	int mod1, mod2;
-
-	clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
-
-	/*
-	 * target sigma-delta to near 250MHz
-	 * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
-	 */
-	clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
-	mod1 = (clkinp * m) % (250 * n);
-	sd = (clkinp * m) / (250 * n);
-	mod2 = sd % 10;
-	sd /= 10;
-
-	if (mod1 || mod2)
-		sd++;
-	*sd_div = sd;
-}
-
-/*
- * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk:	struct clk * of DPLL to set
- * @freqsel:	FREQSEL value to set
- *
- * Program the DPLL with the last M, N values calculated, and wait for
- * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
-{
-	struct dpll_data *dd = clk->dpll_data;
-	u8 dco, sd_div;
-	u32 v;
-
-	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
-	_omap3_noncore_dpll_bypass(clk);
-
-	/*
-	 * Set jitter correction. Jitter correction applicable for OMAP343X
-	 * only since freqsel field is no longer present on other devices.
-	 */
-	if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
-		v = omap2_clk_readl(clk, dd->control_reg);
-		v &= ~dd->freqsel_mask;
-		v |= freqsel << __ffs(dd->freqsel_mask);
-		omap2_clk_writel(v, clk, dd->control_reg);
-	}
-
-	/* Set DPLL multiplier, divider */
-	v = omap2_clk_readl(clk, dd->mult_div1_reg);
-
-	/* Handle Duty Cycle Correction */
-	if (dd->dcc_mask) {
-		if (dd->last_rounded_rate >= dd->dcc_rate)
-			v |= dd->dcc_mask; /* Enable DCC */
-		else
-			v &= ~dd->dcc_mask; /* Disable DCC */
-	}
-
-	v &= ~(dd->mult_mask | dd->div1_mask);
-	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
-	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
-
-	/* Configure dco and sd_div for dplls that have these fields */
-	if (dd->dco_mask) {
-		_lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
-		v &= ~(dd->dco_mask);
-		v |= dco << __ffs(dd->dco_mask);
-	}
-	if (dd->sddiv_mask) {
-		_lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
-			      dd->last_rounded_n);
-		v &= ~(dd->sddiv_mask);
-		v |= sd_div << __ffs(dd->sddiv_mask);
-	}
-
-	omap2_clk_writel(v, clk, dd->mult_div1_reg);
-
-	/* Set 4X multiplier and low-power mode */
-	if (dd->m4xen_mask || dd->lpmode_mask) {
-		v = omap2_clk_readl(clk, dd->control_reg);
-
-		if (dd->m4xen_mask) {
-			if (dd->last_rounded_m4xen)
-				v |= dd->m4xen_mask;
-			else
-				v &= ~dd->m4xen_mask;
-		}
-
-		if (dd->lpmode_mask) {
-			if (dd->last_rounded_lpmode)
-				v |= dd->lpmode_mask;
-			else
-				v &= ~dd->lpmode_mask;
-		}
-
-		omap2_clk_writel(v, clk, dd->control_reg);
-	}
-
-	/* We let the clock framework set the other output dividers later */
-
-	/* REVISIT: Set ramp-up delay? */
-
-	_omap3_noncore_dpll_lock(clk);
-
-	return 0;
-}
-
-/* Public functions */
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
-	return omap2_get_dpll_rate(clk);
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock.  This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state.  Intended to be used as the struct clk's
- * enable function.  If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-int omap3_noncore_dpll_enable(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	int r;
-	struct dpll_data *dd;
-	struct clk_hw *parent;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (clk->clkdm) {
-		r = clkdm_clk_enable(clk->clkdm, hw->clk);
-		if (r) {
-			WARN(1,
-			     "%s: could not enable %s's clockdomain %s: %d\n",
-			     __func__, __clk_get_name(hw->clk),
-			     clk->clkdm->name, r);
-			return r;
-		}
-	}
-
-	parent = __clk_get_hw(__clk_get_parent(hw->clk));
-
-	if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
-		WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
-		r = _omap3_noncore_dpll_bypass(clk);
-	} else {
-		WARN_ON(parent != __clk_get_hw(dd->clk_ref));
-		r = _omap3_noncore_dpll_lock(clk);
-	}
-
-	return r;
-}
-
-/**
- * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop.  This function is
- * intended for use in struct clkops.  No return value.
- */
-void omap3_noncore_dpll_disable(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
-	_omap3_noncore_dpll_stop(clk);
-	if (clk->clkdm)
-		clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/**
- * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired target rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
-				       unsigned long min_rate,
-				       unsigned long max_rate,
-				       unsigned long *best_parent_rate,
-				       struct clk_hw **best_parent_clk)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	struct dpll_data *dd;
-
-	if (!hw || !rate)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (__clk_get_rate(dd->clk_bypass) == rate &&
-	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
-		*best_parent_clk = __clk_get_hw(dd->clk_bypass);
-	} else {
-		rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
-		*best_parent_clk = __clk_get_hw(dd->clk_ref);
-	}
-
-	*best_parent_rate = rate;
-
-	return rate;
-}
-
-/**
- * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @index: parent index to select
- *
- * Sets parent for a DPLL clock. This sets the DPLL into bypass or
- * locked mode. Returns 0 with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	int ret;
-
-	if (!hw)
-		return -EINVAL;
-
-	if (index)
-		ret = _omap3_noncore_dpll_bypass(clk);
-	else
-		ret = _omap3_noncore_dpll_lock(clk);
-
-	return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @rate: target rate for the clock
- * @parent_rate: rate of the parent clock
- *
- * Sets rate for a DPLL clock. First checks if the clock parent is
- * reference clock (in bypass mode, the rate of the clock can't be
- * changed) and proceeds with the rate change operation. Returns 0
- * with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	struct dpll_data *dd;
-	u16 freqsel = 0;
-	int ret;
-
-	if (!hw || !rate)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
-	    __clk_get_hw(dd->clk_ref))
-		return -EINVAL;
-
-	if (dd->last_rounded_rate == 0)
-		return -EINVAL;
-
-	/* Freqsel is available only on OMAP343X devices */
-	if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
-		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
-		WARN_ON(!freqsel);
-	}
-
-	pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
-		 __clk_get_name(hw->clk), rate);
-
-	ret = omap3_noncore_dpll_program(clk, freqsel);
-
-	return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
- * @hw: pointer to the clock to set rate and parent for
- * @rate: target rate for the DPLL
- * @parent_rate: clock rate of the DPLL parent
- * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
- *
- * Sets rate and parent for a DPLL clock. If new parent is the bypass
- * clock, only selects the parent. Otherwise proceeds with a rate
- * change, as this will effectively also change the parent as the
- * DPLL is put into locked mode. Returns 0 with success, negative error
- * value otherwise.
- */
-int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
-					   unsigned long rate,
-					   unsigned long parent_rate,
-					   u8 index)
-{
-	int ret;
-
-	if (!hw || !rate)
-		return -EINVAL;
-
-	/*
-	 * clk-ref at index[0], in which case we only need to set rate,
-	 * the parent will be changed automatically with the lock sequence.
-	 * With clk-bypass case we only need to change parent.
-	 */
-	if (index)
-		ret = omap3_noncore_dpll_set_parent(hw, index);
-	else
-		ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-
-	return ret;
-}
-
-/* DPLL autoidle read/set code */
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-
-	if (!dd->autoidle_reg)
-		return -EINVAL;
-
-	v = omap2_clk_readl(clk, dd->autoidle_reg);
-	v &= dd->autoidle_mask;
-	v >>= __ffs(dd->autoidle_mask);
-
-	return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control.  This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430.  The DPLL will enter low-power stop when its downstream
- * clocks are gated.  No return value.
- */
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	if (!dd->autoidle_reg)
-		return;
-
-	/*
-	 * REVISIT: CORE DPLL can optionally enter low-power bypass
-	 * by writing 0x5 instead of 0x1.  Add some mechanism to
-	 * optionally enter this mode.
-	 */
-	v = omap2_clk_readl(clk, dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control.  No return value.
- */
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	if (!dd->autoidle_reg)
-		return;
-
-	v = omap2_clk_readl(clk, dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/* Clock control for DPLL outputs */
-
-/* Find the parent DPLL for the given clkoutx2 clock */
-static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
-{
-	struct clk_hw_omap *pclk = NULL;
-	struct clk *parent;
-
-	/* Walk up the parents of clk, looking for a DPLL */
-	do {
-		do {
-			parent = __clk_get_parent(hw->clk);
-			hw = __clk_get_hw(parent);
-		} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
-		if (!hw)
-			break;
-		pclk = to_clk_hw_omap(hw);
-	} while (pclk && !pclk->dpll_data);
-
-	/* clk does not have a DPLL as a parent?  error in the clock data */
-	if (!pclk) {
-		WARN_ON(1);
-		return NULL;
-	}
-
-	return pclk;
-}
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state.  If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
-				    unsigned long parent_rate)
-{
-	const struct dpll_data *dd;
-	unsigned long rate;
-	u32 v;
-	struct clk_hw_omap *pclk = NULL;
-
-	if (!parent_rate)
-		return 0;
-
-	pclk = omap3_find_clkoutx2_dpll(hw);
-
-	if (!pclk)
-		return 0;
-
-	dd = pclk->dpll_data;
-
-	WARN_ON(!dd->enable_mask);
-
-	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
-		rate = parent_rate;
-	else
-		rate = parent_rate * 2;
-	return rate;
-}
-
-int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
-					unsigned long parent_rate)
-{
-	return 0;
-}
-
-long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
-		unsigned long *prate)
-{
-	const struct dpll_data *dd;
-	u32 v;
-	struct clk_hw_omap *pclk = NULL;
-
-	if (!*prate)
-		return 0;
-
-	pclk = omap3_find_clkoutx2_dpll(hw);
-
-	if (!pclk)
-		return 0;
-
-	dd = pclk->dpll_data;
-
-	/* TYPE J does not have a clkoutx2 */
-	if (dd->flags & DPLL_J_TYPE) {
-		*prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
-		return *prate;
-	}
-
-	WARN_ON(!dd->enable_mask);
-
-	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	/* If in bypass, the rate is fixed to the bypass rate*/
-	if (v != OMAP3XXX_EN_DPLL_LOCKED)
-		return *prate;
-
-	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
-		unsigned long best_parent;
-
-		best_parent = (rate / 2);
-		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
-				best_parent);
-	}
-
-	return *prate * 2;
-}
-
-/* OMAP3/4 non-CORE DPLL clkops */
-const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
deleted file mode 100644
index f231be05b..000000000
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * OMAP4-specific DPLL control functions
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include "clock.h"
-
-/*
- * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
- * can supported when using the DPLL low-power mode. Frequencies are
- * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
- * Status, and Low-Power Operation Mode".
- */
-#define OMAP4_DPLL_LP_FINT_MAX	1000000
-#define OMAP4_DPLL_LP_FOUT_MAX	100000000
-
-/*
- * Bitfield declarations
- */
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK		(1 << 8)
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK		(1 << 10)
-#define OMAP4430_DPLL_REGM4XEN_MASK			(1 << 11)
-
-/* Static rate multiplier for OMAP4 REGM4XEN clocks */
-#define OMAP4430_REGM4XEN_MULT				4
-
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
-{
-	u32 v;
-	u32 mask;
-
-	if (!clk || !clk->clksel_reg)
-		return;
-
-	mask = clk->flags & CLOCK_CLKOUTX2 ?
-			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
-			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
-	v = omap2_clk_readl(clk, clk->clksel_reg);
-	/* Clear the bit to allow gatectrl */
-	v &= ~mask;
-	omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
-{
-	u32 v;
-	u32 mask;
-
-	if (!clk || !clk->clksel_reg)
-		return;
-
-	mask = clk->flags & CLOCK_CLKOUTX2 ?
-			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
-			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
-	v = omap2_clk_readl(clk, clk->clksel_reg);
-	/* Set the bit to deny gatectrl */
-	v |= mask;
-	omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
-	.allow_idle	= omap4_dpllmx_allow_gatectrl,
-	.deny_idle      = omap4_dpllmx_deny_gatectrl,
-};
-
-/**
- * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
- * @dd: pointer to the dpll data structure
- *
- * Calculates if low-power mode can be enabled based upon the last
- * multiplier and divider values calculated. If low-power mode can be
- * enabled, then the bit to enable low-power mode is stored in the
- * last_rounded_lpmode variable. This implementation is based upon the
- * criteria for enabling low-power mode as described in the OMAP4430/60
- * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
- * Operation Mode".
- */
-static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
-{
-	long fint, fout;
-
-	fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
-	fout = fint * dd->last_rounded_m;
-
-	if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
-		dd->last_rounded_lpmode = 1;
-	else
-		dd->last_rounded_lpmode = 0;
-}
-
-/**
- * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to compute the rate for
- *
- * Compute the output rate for the OMAP4 DPLL represented by @clk.
- * Takes the REGM4XEN bit into consideration, which is needed for the
- * OMAP4 ABE DPLL.  Returns the DPLL's output rate (before M-dividers)
- * upon success, or 0 upon error.
- */
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
-			unsigned long parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 v;
-	unsigned long rate;
-	struct dpll_data *dd;
-
-	if (!clk || !clk->dpll_data)
-		return 0;
-
-	dd = clk->dpll_data;
-
-	rate = omap2_get_dpll_rate(clk);
-
-	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = omap2_clk_readl(clk, dd->control_reg);
-	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
-		rate *= OMAP4430_REGM4XEN_MULT;
-
-	return rate;
-}
-
-/**
- * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to round a rate for
- * @target_rate: the desired rate of the DPLL
- *
- * Compute the rate that would be programmed into the DPLL hardware
- * for @clk if set_rate() were to be provided with the rate
- * @target_rate.  Takes the REGM4XEN bit into consideration, which is
- * needed for the OMAP4 ABE DPLL.  Returns the rounded rate (before
- * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
- * ~0 if an error occurred in omap2_dpll_round_rate().
- */
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
-				    unsigned long target_rate,
-				    unsigned long *parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	struct dpll_data *dd;
-	long r;
-
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-
-	dd->last_rounded_m4xen = 0;
-
-	/*
-	 * First try to compute the DPLL configuration for
-	 * target rate without using the 4X multiplier.
-	 */
-	r = omap2_dpll_round_rate(hw, target_rate, NULL);
-	if (r != ~0)
-		goto out;
-
-	/*
-	 * If we did not find a valid DPLL configuration, try again, but
-	 * this time see if using the 4X multiplier can help. Enabling the
-	 * 4X multiplier is equivalent to dividing the target rate by 4.
-	 */
-	r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
-				  NULL);
-	if (r == ~0)
-		return r;
-
-	dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
-	dd->last_rounded_m4xen = 1;
-
-out:
-	omap4_dpll_lpmode_recalc(dd);
-
-	return dd->last_rounded_rate;
-}
-
-/**
- * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
-					unsigned long min_rate,
-					unsigned long max_rate,
-					unsigned long *best_parent_rate,
-					struct clk_hw **best_parent_clk)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	struct dpll_data *dd;
-
-	if (!hw || !rate)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (__clk_get_rate(dd->clk_bypass) == rate &&
-	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
-		*best_parent_clk = __clk_get_hw(dd->clk_bypass);
-	} else {
-		rate = omap4_dpll_regm4xen_round_rate(hw, rate,
-						      best_parent_rate);
-		*best_parent_clk = __clk_get_hw(dd->clk_ref);
-	}
-
-	*best_parent_rate = rate;
-
-	return rate;
-}
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index ea2be0f59..1d583bc0b 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -27,7 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include <video/omap-panel-data.h>
 
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 72918c497..f6ac027f3 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -97,10 +97,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 	gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
 
 	memset(&s, 0, sizeof(struct gpmc_settings));
-	if (gpmc_nand_data->of_node)
-		gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
-	else
-		gpmc_set_legacy(gpmc_nand_data, &s);
+	gpmc_set_legacy(gpmc_nand_data, &s);
 
 	s.device_nand = true;
 
@@ -121,8 +118,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 	if (err < 0)
 		goto out_free_cs;
 
-	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
-
 	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
 		pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
 		err = -EINVAL;
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 17a6f752a..8633c7035 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
 
 static void set_onenand_cfg(void __iomem *onenand_base)
 {
-	u32 reg;
+	u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT;
 
-	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
 	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
 		ONENAND_SYS_CFG1_BL_16;
 	if (onenand_flags & ONENAND_FLAG_SYNCREAD)
@@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base)
 		reg |= ONENAND_SYS_CFG1_VHF;
 	else
 		reg &= ~ONENAND_SYS_CFG1_VHF;
+
 	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
 }
 
@@ -149,8 +148,8 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
 		freq = 104;
 		break;
 	default:
-		freq = 54;
-		break;
+		pr_err("onenand rate not detected, bad GPMC async timings?\n");
+		freq = 0;
 	}
 
 	return freq;
@@ -271,6 +270,11 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	struct gpmc_timings t;
 	int ret;
 
+	/*
+	 * Note that we need to keep sync_write set for the call to
+	 * omap2_onenand_set_async_mode() to work to detect the onenand
+	 * supported clock rate for the sync timings.
+	 */
 	if (gpmc_onenand_data->of_node) {
 		gpmc_read_settings_dt(gpmc_onenand_data->of_node,
 				      &onenand_async);
@@ -281,12 +285,10 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 			else
 				gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
 			onenand_async.sync_read = false;
-			onenand_async.sync_write = false;
 		}
 	}
 
-	omap2_onenand_set_async_mode(onenand_base);
-
+	onenand_async.sync_write = true;
 	omap2_onenand_calc_async_timings(&t);
 
 	ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);
@@ -310,6 +312,8 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
 	if (!freq) {
 		/* Very first call freq is not known */
 		freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+		if (!freq)
+			return -ENODEV;
 		set_onenand_cfg(onenand_base);
 	}
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index e3f713ffb..2abd53ae3 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -57,15 +57,15 @@ int omap_type(void)
 	if (val < OMAP2_DEVICETYPE_MASK)
 		return val;
 
-	if (cpu_is_omap24xx()) {
+	if (soc_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-	} else if (cpu_is_ti81xx()) {
+	} else if (soc_is_ti81xx()) {
 		val = omap_ctrl_readl(TI81XX_CONTROL_STATUS);
 	} else if (soc_is_am33xx() || soc_is_am43xx()) {
 		val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
-	} else if (cpu_is_omap34xx()) {
+	} else if (soc_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
-	} else if (cpu_is_omap44xx()) {
+	} else if (soc_is_omap44xx()) {
 		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
 	} else if (soc_is_omap54xx() || soc_is_dra7xx()) {
 		val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
@@ -122,7 +122,7 @@ static u16 tap_prod_id;
 
 void omap_get_die_id(struct omap_die_id *odi)
 {
-	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
+	if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
 		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
 		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
@@ -218,17 +218,17 @@ static void __init omap3_cpuinfo(void)
 	 * on available features. Upon detection, update the CPU id
 	 * and CPU class bits.
 	 */
-	if (cpu_is_omap3630()) {
+	if (soc_is_omap3630()) {
 		cpu_name = "OMAP3630";
 	} else if (soc_is_am35xx()) {
 		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
-	} else if (cpu_is_ti816x()) {
+	} else if (soc_is_ti816x()) {
 		cpu_name = "TI816X";
 	} else if (soc_is_am335x()) {
 		cpu_name =  "AM335X";
 	} else if (soc_is_am437x()) {
 		cpu_name =  "AM437x";
-	} else if (cpu_is_ti814x()) {
+	} else if (soc_is_ti814x()) {
 		cpu_name = "TI814X";
 	} else if (omap3_has_iva() && omap3_has_sgx()) {
 		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
@@ -275,11 +275,11 @@ void __init omap3xxx_check_features(void)
 	OMAP3_CHECK_FEATURE(status, SGX);
 	OMAP3_CHECK_FEATURE(status, NEON);
 	OMAP3_CHECK_FEATURE(status, ISP);
-	if (cpu_is_omap3630())
+	if (soc_is_omap3630())
 		omap_features |= OMAP3_HAS_192MHZ_CLK;
-	if (cpu_is_omap3430() || cpu_is_omap3630())
+	if (soc_is_omap3430() || soc_is_omap3630())
 		omap_features |= OMAP3_HAS_IO_WAKEUP;
-	if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
+	if (soc_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
 	    omap_rev() == OMAP3430_REV_ES3_1_2)
 		omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
 
@@ -488,6 +488,7 @@ void __init omap3xxx_check_revision(void)
 		}
 		break;
 	case 0xb8f2:
+	case 0xb968:
 		switch (rev) {
 		case 0:
 		/* FALLTHROUGH */
@@ -511,7 +512,8 @@ void __init omap3xxx_check_revision(void)
 		/* Unknown default to latest silicon rev as default */
 		omap_revision = OMAP3630_REV_ES1_2;
 		cpu_rev = "1.2";
-		pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
+		pr_warn("Warning: unknown chip type: hawkeye %04x, assuming OMAP3630ES1.2\n",
+			hawkeye);
 	}
 	sprintf(soc_rev, "ES%s", cpu_rev);
 }
@@ -653,8 +655,12 @@ void __init dra7xxx_check_revision(void)
 			omap_revision = DRA752_REV_ES1_0;
 			break;
 		case 1:
-		default:
 			omap_revision = DRA752_REV_ES1_1;
+			break;
+		case 2:
+		default:
+			omap_revision = DRA752_REV_ES2_0;
+			break;
 		}
 		break;
 
@@ -663,9 +669,9 @@ void __init dra7xxx_check_revision(void)
 		case 0:
 			omap_revision = DRA722_REV_ES1_0;
 			break;
+		case 1:
 		default:
-			/* If we have no new revisions */
-			omap_revision = DRA722_REV_ES1_0;
+			omap_revision = DRA722_REV_ES2_0;
 			break;
 		}
 		break;
@@ -674,7 +680,7 @@ void __init dra7xxx_check_revision(void)
 		/* Unknown default to latest silicon rev as default*/
 		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
 			__func__, idcode, hawkeye, rev);
-		omap_revision = DRA752_REV_ES1_1;
+		omap_revision = DRA752_REV_ES2_0;
 	}
 
 	sprintf(soc_name, "DRA%03x", omap_rev() >> 16);
@@ -697,7 +703,7 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
 	tap_base = tap;
 
 	/* XXX What is this intended to do? */
-	if (cpu_is_omap34xx())
+	if (soc_is_omap34xx())
 		tap_prod_id = 0x0210;
 	else
 		tap_prod_id = 0x0208;
@@ -715,11 +721,11 @@ static const char * const omap_types[] = {
 
 static const char * __init omap_get_family(void)
 {
-	if (cpu_is_omap24xx())
+	if (soc_is_omap24xx())
 		return kasprintf(GFP_KERNEL, "OMAP2");
-	else if (cpu_is_omap34xx())
+	else if (soc_is_omap34xx())
 		return kasprintf(GFP_KERNEL, "OMAP3");
-	else if (cpu_is_omap44xx())
+	else if (soc_is_omap44xx())
 		return kasprintf(GFP_KERNEL, "OMAP4");
 	else if (soc_is_omap54xx())
 		return kasprintf(GFP_KERNEL, "OMAP5");
diff --git a/arch/arm/mach-omap2/include/mach/barriers.h b/arch/arm/mach-omap2/include/mach/barriers.h
deleted file mode 100644
index 1c582a859..000000000
--- a/arch/arm/mach-omap2/include/mach/barriers.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * OMAP memory barrier header.
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *  Santosh Shilimkar <santosh.shilimkar@ti.com>
- *  Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __MACH_BARRIERS_H
-#define __MACH_BARRIERS_H
-
-#include <asm/outercache.h>
-
-extern void omap_bus_sync(void);
-
-#define rmb()		dsb()
-#define wmb()		do { dsb(); outer_sync(); omap_bus_sync(); } while (0)
-#define mb()		wmb()
-
-#endif	/* __MACH_BARRIERS_H */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 820dde8b5..0e9acdd95 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -37,7 +37,6 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "clock3xxx.h"
-#include "clock44xx.h"
 #include "omap-pm.h"
 #include "sdrc.h"
 #include "control.h"
@@ -236,7 +235,7 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 };
 #endif
 
-#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
+#ifdef CONFIG_SOC_OMAP5
 static struct map_desc omap54xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_54XX_VIRT,
@@ -265,6 +264,53 @@ static struct map_desc omap54xx_io_desc[] __initdata = {
 };
 #endif
 
+#ifdef CONFIG_SOC_DRA7XX
+static struct map_desc dra7xx_io_desc[] __initdata = {
+	{
+		.virtual	= L4_CFG_MPU_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_CFG_MPU_DRA7XX_PHYS),
+		.length		= L4_CFG_MPU_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L3_MAIN_SN_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_MAIN_SN_DRA7XX_PHYS),
+		.length		= L3_MAIN_SN_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER1_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER1_DRA7XX_PHYS),
+		.length		= L4_PER1_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER2_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER2_DRA7XX_PHYS),
+		.length		= L4_PER2_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER3_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER3_DRA7XX_PHYS),
+		.length		= L4_PER3_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_CFG_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_CFG_DRA7XX_PHYS),
+		.length		= L4_CFG_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WKUP_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WKUP_DRA7XX_PHYS),
+		.length		= L4_WKUP_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
+
 #ifdef CONFIG_SOC_OMAP2420
 void __init omap242x_map_io(void)
 {
@@ -306,13 +352,23 @@ void __init am33xx_map_io(void)
 void __init omap4_map_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 
-#if defined(CONFIG_SOC_OMAP5) ||  defined(CONFIG_SOC_DRA7XX)
+#ifdef CONFIG_SOC_OMAP5
 void __init omap5_map_io(void)
 {
 	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
+	omap_barriers_init();
+}
+#endif
+
+#ifdef CONFIG_SOC_DRA7XX
+void __init dra7xx_map_io(void)
+{
+	iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 /*
@@ -554,11 +610,10 @@ void __init ti814x_init_early(void)
 	omap2_prcm_base_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
-	ti81xx_clockdomains_init();
-	ti81xx_hwmod_init();
+	ti814x_clockdomains_init();
+	dm814x_hwmod_init();
 	omap_hwmod_init_postsetup();
-	if (of_have_populated_dt())
-		omap_clk_soc_init = ti81xx_dt_clk_init;
+	omap_clk_soc_init = dm814x_dt_clk_init;
 }
 
 void __init ti816x_init_early(void)
@@ -571,11 +626,11 @@ void __init ti816x_init_early(void)
 	omap2_prcm_base_init();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
-	ti81xx_clockdomains_init();
-	ti81xx_hwmod_init();
+	ti816x_clockdomains_init();
+	dm816x_hwmod_init();
 	omap_hwmod_init_postsetup();
 	if (of_have_populated_dt())
-		omap_clk_soc_init = ti81xx_dt_clk_init;
+		omap_clk_soc_init = dm816x_dt_clk_init;
 }
 #endif
 
@@ -621,6 +676,7 @@ void __init am43xx_init_early(void)
 void __init am43xx_init_late(void)
 {
 	omap_common_late_init();
+	omap2_clk_enable_autoidle_all();
 }
 #endif
 
@@ -634,6 +690,8 @@ void __init omap4430_init_early(void)
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
 	omap2_prcm_base_init();
+	omap4_sar_ram_init();
+	omap4_mpuss_early_init();
 	omap4_pm_init_early();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
@@ -662,6 +720,7 @@ void __init omap5_init_early(void)
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	omap5xxx_check_revision();
+	omap4_sar_ram_init();
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();
@@ -681,7 +740,8 @@ void __init omap5_init_late(void)
 #ifdef CONFIG_SOC_DRA7XX
 void __init dra7xx_init_early(void)
 {
-	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
+	omap2_set_globals_tap(DRA7XX_CLASS,
+			      OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap2_control_base_init();
 	omap4_pm_init_early();
@@ -723,6 +783,8 @@ int __init omap_clk_init(void)
 
 	ti_clk_init_features();
 
+	omap2_clk_setup_ll_ops();
+
 	if (of_have_populated_dt()) {
 		ret = omap_control_init();
 		if (ret)
diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
index cce2b6503..6191d2444 100644
--- a/arch/arm/mach-omap2/iomap.h
+++ b/arch/arm/mach-omap2/iomap.h
@@ -194,3 +194,66 @@
 #define L4_PER_54XX_PHYS	L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */
 #define L4_PER_54XX_VIRT	(L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_PER_54XX_SIZE	SZ_4M
+
+/*
+ * ----------------------------------------------------------------------------
+ * DRA7xx specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+/*
+ * L3_MAIN_SN_DRA7XX_PHYS 0x44000000 --> 0xf8000000
+ * The overall space is 24MiB (0x4400_0000<->0x457F_FFFF), but mapping
+ * everything is just inefficient, since, there are too many address holes.
+ */
+#define L3_MAIN_SN_DRA7XX_PHYS		L3_MAIN_SN_DRA7XX_BASE
+#define L3_MAIN_SN_DRA7XX_VIRT		(L3_MAIN_SN_DRA7XX_PHYS + OMAP4_L3_IO_OFFSET)
+#define L3_MAIN_SN_DRA7XX_SIZE		SZ_1M
+
+/*
+ * L4_PER1_DRA7XX_PHYS	(0x4800_000<>0x480D_2FFF) -> 0.82MiB (alloc 1MiB)
+ *	(0x48000000<->0x48100000) <=> (0xFA000000<->0xFA100000)
+ */
+#define L4_PER1_DRA7XX_PHYS		L4_PER1_DRA7XX_BASE
+#define L4_PER1_DRA7XX_VIRT		(L4_PER1_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER1_DRA7XX_SIZE		SZ_1M
+
+/*
+ * L4_CFG_MPU_DRA7XX_PHYS	(0x48210000<>0x482A_F2FF) -> 0.62MiB (alloc 1MiB)
+ *	(0x48210000<->0x48310000) <=> (0xFA210000<->0xFA310000)
+ * NOTE: This is a bit of an orphan memory map sitting isolated in TRM
+ */
+#define L4_CFG_MPU_DRA7XX_PHYS		L4_CFG_MPU_DRA7XX_BASE
+#define L4_CFG_MPU_DRA7XX_VIRT		(L4_CFG_MPU_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_CFG_MPU_DRA7XX_SIZE		SZ_1M
+
+/*
+ * L4_PER2_DRA7XX_PHYS	(0x4840_0000<>0x4848_8FFF) -> .53MiB (alloc 1MiB)
+ *	(0x48400000<->0x48500000) <=> (0xFA400000<->0xFA500000)
+ */
+#define L4_PER2_DRA7XX_PHYS		L4_PER2_DRA7XX_BASE
+#define L4_PER2_DRA7XX_VIRT		(L4_PER2_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER2_DRA7XX_SIZE		SZ_1M
+
+/*
+ * L4_PER3_DRA7XX_PHYS	(0x4880_0000<>0x489E_0FFF) -> 1.87MiB (alloc 2MiB)
+ *	(0x48800000<->0x48A00000) <=> (0xFA800000<->0xFAA00000)
+ */
+#define L4_PER3_DRA7XX_PHYS		L4_PER3_DRA7XX_BASE
+#define L4_PER3_DRA7XX_VIRT		(L4_PER3_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER3_DRA7XX_SIZE		SZ_2M
+
+/*
+ * L4_CFG_DRA7XX_PHYS	(0x4A00_0000<>0x4A22_BFFF) ->2.17MiB (alloc 3MiB)?
+ *	(0x4A000000<->0x4A300000) <=> (0xFC000000<->0xFC300000)
+ */
+#define L4_CFG_DRA7XX_PHYS		L4_CFG_DRA7XX_BASE
+#define L4_CFG_DRA7XX_VIRT		(L4_CFG_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_CFG_DRA7XX_SIZE		(SZ_1M + SZ_2M)
+
+/*
+ * L4_WKUP_DRA7XX_PHYS	(0x4AE0_0000<>0x4AE3_EFFF) -> .24 mb (alloc 1MiB)?
+ *	(0x4AE00000<->4AF00000)	<=> (0xFCE00000<->0xFCF00000)
+ */
+#define L4_WKUP_DRA7XX_PHYS		L4_WKUP_DRA7XX_BASE
+#define L4_WKUP_DRA7XX_VIRT		(L4_WKUP_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WKUP_DRA7XX_SIZE		SZ_1M
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index b4ac3af11..fc04be74e 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -34,18 +34,24 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
-static struct clk *mcbsp_iclks[5];
-
-static int omap3_enable_st_clock(unsigned int id, bool enable)
+static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
 {
-	/*
-	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
-	 * are enabled or sidetones start sounding ugly.
-	 */
-	if (enable)
-		return omap2_clk_deny_idle(mcbsp_iclks[id]);
+	if (!clk)
+		return 0;
+
+	if (force_on)
+		return omap2_clk_deny_idle(clk);
 	else
-		return omap2_clk_allow_idle(mcbsp_iclks[id]);
+		return omap2_clk_allow_idle(clk);
+}
+
+void __init omap3_mcbsp_init_pdata_callback(
+					struct omap_mcbsp_platform_data *pdata)
+{
+	if (!pdata)
+		return;
+
+	pdata->force_ick_on = omap3_mcbsp_force_ick_on;
 }
 
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
@@ -55,7 +61,6 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	struct omap_hwmod *oh_device[2];
 	struct omap_mcbsp_platform_data *pdata = NULL;
 	struct platform_device *pdev;
-	char clk_name[11];
 
 	sscanf(oh->name, "mcbsp%d", &id);
 
@@ -96,9 +101,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	if (oh->dev_attr) {
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
-		pdata->enable_st_clock = omap3_enable_st_clock;
-		sprintf(clk_name, "mcbsp%d_ick", id);
-		mcbsp_iclks[id] = clk_get(NULL, clk_name);
+		pdata->force_ick_on = omap3_mcbsp_force_ick_on;
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index be271f1d5..393e687f9 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -1266,7 +1266,7 @@ static struct omap_ball __initdata omap3_cus_ball[] = {
 #endif
 
 /*
- * Signals different on CBB package comapared to superset
+ * Signals different on CBB package compared to superset
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
 static struct omap_mux __initdata omap3_cbb_subset[] = {
@@ -1597,7 +1597,7 @@ static struct omap_ball __initdata omap3_cbb_ball[] = {
 #endif
 
 /*
- * Signals different on 36XX CBP package comapared to 34XX CBC package
+ * Signals different on 36XX CBP package compared to 34XX CBC package
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
 static struct omap_mux __initdata omap36xx_cbp_subset[] = {
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 6d1dffca6..fe36ce273 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -24,6 +24,16 @@
 #define AUX_CORE_BOOT0_PA			0x48281800
 #define API_HYP_ENTRY				0x102
 
+ENTRY(omap_secondary_startup)
+#ifdef CONFIG_SMP
+	b	secondary_startup
+#else
+/* Should never get here */
+again:	wfi
+	b	again
+#endif
+#ENDPROC(omap_secondary_startup)
+
 /*
  * OMAP5 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which
@@ -39,7 +49,7 @@ wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	and	r4, r4, #0x0f
 	cmp	r0, r4
 	bne	wait
-	b	secondary_startup
+	b	omap_secondary_startup
 ENDPROC(omap5_secondary_startup)
 /*
  * Same as omap5_secondary_startup except we call into the ROM to
@@ -59,7 +69,7 @@ wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	adr	r0, hyp_boot
 	smc	#0
 hyp_boot:
-	b	secondary_startup
+	b	omap_secondary_startup
 ENDPROC(omap5_secondary_hyp_startup)
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
@@ -82,7 +92,7 @@ hold:	ldr	r12,=0x103
 	 * we've been released from the wait loop,secondary_stack
 	 * should now contain the SVC stack for this core
 	 */
-	b	secondary_startup
+	b	omap_secondary_startup
 ENDPROC(omap4_secondary_startup)
 
 ENTRY(omap4460_secondary_startup)
@@ -119,5 +129,5 @@ hold_2:	ldr	r12,=0x103
 	 * we've been released from the wait loop,secondary_stack
 	 * should now contain the SVC stack for this core
 	 */
-	b	secondary_startup
+	b	omap_secondary_startup
 ENDPROC(omap4460_secondary_startup)
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 971791fe9..d3fb5661b 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -27,7 +27,7 @@
  * platform-specific code to shutdown a CPU
  * Called with IRQs disabled
  */
-void __ref omap4_cpu_die(unsigned int cpu)
+void omap4_cpu_die(unsigned int cpu)
 {
 	unsigned int boot_cpu = 0;
 	void __iomem *base = omap_get_wakeupgen_base();
@@ -64,3 +64,9 @@ void __ref omap4_cpu_die(unsigned int cpu)
 		pr_debug("CPU%u: spurious wakeup call\n", cpu);
 	}
 }
+
+/* Needed by kexec and platform_can_cpu_hotplug() */
+int omap4_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
deleted file mode 100644
index 4068350f9..000000000
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * omap iommu: omap device registration
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/of.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <linux/platform_data/iommu-omap.h>
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-
-static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused)
-{
-	struct platform_device *pdev;
-	struct iommu_platform_data *pdata;
-	struct omap_mmu_dev_attr *a = (struct omap_mmu_dev_attr *)oh->dev_attr;
-	static int i;
-
-	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return -ENOMEM;
-
-	pdata->name = oh->name;
-	pdata->nr_tlb_entries = a->nr_tlb_entries;
-
-	if (oh->rst_lines_cnt == 1) {
-		pdata->reset_name = oh->rst_lines->name;
-		pdata->assert_reset = omap_device_assert_hardreset;
-		pdata->deassert_reset = omap_device_deassert_hardreset;
-	}
-
-	pdev = omap_device_build("omap-iommu", i, oh, pdata, sizeof(*pdata));
-
-	kfree(pdata);
-
-	if (IS_ERR(pdev)) {
-		pr_err("%s: device build err: %ld\n", __func__, PTR_ERR(pdev));
-		return PTR_ERR(pdev);
-	}
-
-	i++;
-
-	return 0;
-}
-
-static int __init omap_iommu_init(void)
-{
-	/* If dtb is there, the devices will be created dynamically */
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL);
-}
-/* must be ready before omap3isp is probed */
-omap_subsys_initcall(omap_iommu_init);
-
-static void __exit omap_iommu_exit(void)
-{
-	/* Do nothing */
-}
-module_exit(omap_iommu_exit);
-
-MODULE_AUTHOR("Hiroshi DOYU");
-MODULE_DESCRIPTION("omap iommu: omap device registration");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 79f49d904..ad982465e 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -62,7 +62,9 @@
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 
-#ifdef CONFIG_SMP
+static void __iomem *sar_base;
+
+#if defined(CONFIG_PM) && defined(CONFIG_SMP)
 
 struct omap4_cpu_pm_info {
 	struct powerdomain *pwrdm;
@@ -90,7 +92,6 @@ struct cpu_pm_ops {
 
 static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
 static struct powerdomain *mpuss_pd;
-static void __iomem *sar_base;
 static u32 cpu_context_offset;
 
 static int default_finish_suspend(unsigned long cpu_state)
@@ -105,7 +106,7 @@ static void dummy_cpu_resume(void)
 static void dummy_scu_prepare(unsigned int cpu_id, unsigned int cpu_state)
 {}
 
-struct cpu_pm_ops omap_pm_ops = {
+static struct cpu_pm_ops omap_pm_ops = {
 	.finish_suspend		= default_finish_suspend,
 	.resume			= dummy_cpu_resume,
 	.scu_prepare		= dummy_scu_prepare,
@@ -366,9 +367,6 @@ int __init omap4_mpuss_init(void)
 		return -ENODEV;
 	}
 
-	if (cpu_is_omap44xx())
-		sar_base = omap4_get_sar_ram_base();
-
 	/* Initilaise per CPU PM information */
 	pm_info = &per_cpu(omap4_pm_info, 0x0);
 	if (sar_base) {
@@ -444,3 +442,26 @@ int __init omap4_mpuss_init(void)
 }
 
 #endif
+
+/*
+ * For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to
+ * current kernel's secondary_startup() early before
+ * clockdomains_init(). Otherwise clockdomain_init() can
+ * wake CPU1 and cause a hang.
+ */
+void __init omap4_mpuss_early_init(void)
+{
+	unsigned long startup_pa;
+
+	if (!cpu_is_omap44xx())
+		return;
+
+	sar_base = omap4_get_sar_ram_base();
+
+	if (cpu_is_omap443x())
+		startup_pa = virt_to_phys(omap4_secondary_startup);
+	else
+		startup_pa = virt_to_phys(omap4460_secondary_startup);
+
+	writel_relaxed(startup_pa, sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
+}
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index af2851fbc..bae263fba 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -46,6 +46,7 @@
 
 #define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX	0x109
 #define OMAP5_MON_AMBA_IF_INDEX		0x108
+#define OMAP5_DRA7_MON_SET_ACR_INDEX	0x107
 
 /* Secure PPA(Primary Protected Application) APIs */
 #define OMAP4_PPA_L2_POR_INDEX		0x23
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 5305ec734..b4de3da6d 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -40,16 +40,70 @@
 
 #define OMAP5_CORE_COUNT	0x2
 
-/* SCU base address */
-static void __iomem *scu_base;
+struct omap_smp_config {
+	unsigned long cpu1_rstctrl_pa;
+	void __iomem *cpu1_rstctrl_va;
+	void __iomem *scu_base;
+	void *startup_addr;
+};
+
+static struct omap_smp_config cfg;
+
+static const struct omap_smp_config omap443x_cfg __initconst = {
+	.cpu1_rstctrl_pa = 0x4824380c,
+	.startup_addr = omap4_secondary_startup,
+};
+
+static const struct omap_smp_config omap446x_cfg __initconst = {
+	.cpu1_rstctrl_pa = 0x4824380c,
+	.startup_addr = omap4460_secondary_startup,
+};
+
+static const struct omap_smp_config omap5_cfg __initconst = {
+	.cpu1_rstctrl_pa = 0x48243810,
+	.startup_addr = omap5_secondary_startup,
+};
 
 static DEFINE_SPINLOCK(boot_lock);
 
 void __iomem *omap4_get_scu_base(void)
 {
-	return scu_base;
+	return cfg.scu_base;
 }
 
+#ifdef CONFIG_OMAP5_ERRATA_801819
+void omap5_erratum_workaround_801819(void)
+{
+	u32 acr, revidr;
+	u32 acr_mask;
+
+	/* REVIDR[3] indicates erratum fix available on silicon */
+	asm volatile ("mrc p15, 0, %0, c0, c0, 6" : "=r" (revidr));
+	if (revidr & (0x1 << 3))
+		return;
+
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+	/*
+	 * BIT(27) - Disables streaming. All write-allocate lines allocate in
+	 * the L1 or L2 cache.
+	 * BIT(25) - Disables streaming. All write-allocate lines allocate in
+	 * the L1 cache.
+	 */
+	acr_mask = (0x3 << 25) | (0x3 << 27);
+	/* do we already have it done.. if yes, skip expensive smc */
+	if ((acr & acr_mask) == acr_mask)
+		return;
+
+	acr |= acr_mask;
+	omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr);
+
+	pr_debug("%s: ARM erratum workaround 801819 applied on CPU%d\n",
+		 __func__, smp_processor_id());
+}
+#else
+static inline void omap5_erratum_workaround_801819(void) { }
+#endif
+
 static void omap4_secondary_init(unsigned int cpu)
 {
 	/*
@@ -60,16 +114,19 @@ static void omap4_secondary_init(unsigned int cpu)
 	 * OMAP443X GP devices- SMP bit isn't accessible.
 	 * OMAP446X GP devices - SMP bit access is enabled on both CPUs.
 	 */
-	if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+	if (soc_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
 		omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
 							4, 0, 0, 0, 0, 0);
 
-	/*
-	 * Configure the CNTFRQ register for the secondary cpu's which
-	 * indicates the frequency of the cpu local timers.
-	 */
-	if (soc_is_omap54xx() || soc_is_dra7xx())
+	if (soc_is_omap54xx() || soc_is_dra7xx()) {
+		/*
+		 * Configure the CNTFRQ register for the secondary cpu's which
+		 * indicates the frequency of the cpu local timers.
+		 */
 		set_cntfreq();
+		/* Configure ACR to disable streaming WA for 801819 */
+		omap5_erratum_workaround_801819();
+	}
 
 	/*
 	 * Synchronise with the boot thread.
@@ -143,9 +200,9 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		 * Ensure that CPU power state is set to ON to avoid CPU
 		 * powerdomain transition on wfi
 		 */
-		clkdm_wakeup(cpu1_clkdm);
-		omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
-		clkdm_allow_idle(cpu1_clkdm);
+		clkdm_deny_idle_nolock(cpu1_clkdm);
+		pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON);
+		clkdm_allow_idle_nolock(cpu1_clkdm);
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
 			while (gic_dist_disabled()) {
@@ -186,9 +243,9 @@ static void __init omap4_smp_init_cpus(void)
 		 * Currently we can't call ioremap here because
 		 * SoC detection won't work until after init_early.
 		 */
-		scu_base =  OMAP2_L4_IO_ADDRESS(scu_a9_get_base());
-		BUG_ON(!scu_base);
-		ncores = scu_get_core_count(scu_base);
+		cfg.scu_base =  OMAP2_L4_IO_ADDRESS(scu_a9_get_base());
+		BUG_ON(!cfg.scu_base);
+		ncores = scu_get_core_count(cfg.scu_base);
 	} else if (cpu_id == CPU_CORTEX_A15) {
 		ncores = OMAP5_CORE_COUNT;
 	}
@@ -206,18 +263,51 @@ static void __init omap4_smp_init_cpus(void)
 
 static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 {
-	void *startup_addr = omap4_secondary_startup;
 	void __iomem *base = omap_get_wakeupgen_base();
+	const struct omap_smp_config *c = NULL;
+
+	if (soc_is_omap443x())
+		c = &omap443x_cfg;
+	else if (soc_is_omap446x())
+		c = &omap446x_cfg;
+	else if (soc_is_dra74x() || soc_is_omap54xx())
+		c = &omap5_cfg;
+
+	if (!c) {
+		pr_err("%s Unknown SMP SoC?\n", __func__);
+		return;
+	}
+
+	/* Must preserve cfg.scu_base set earlier */
+	cfg.cpu1_rstctrl_pa = c->cpu1_rstctrl_pa;
+	cfg.startup_addr = c->startup_addr;
+
+	if (soc_is_dra74x() || soc_is_omap54xx()) {
+		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
+			cfg.startup_addr = omap5_secondary_hyp_startup;
+		omap5_erratum_workaround_801819();
+	}
+
+	cfg.cpu1_rstctrl_va = ioremap(cfg.cpu1_rstctrl_pa, 4);
+	if (!cfg.cpu1_rstctrl_va)
+		return;
 
 	/*
 	 * Initialise the SCU and wake up the secondary core using
 	 * wakeup_secondary().
 	 */
-	if (scu_base)
-		scu_enable(scu_base);
+	if (cfg.scu_base)
+		scu_enable(cfg.scu_base);
 
-	if (cpu_is_omap446x())
-		startup_addr = omap4460_secondary_startup;
+	/*
+	 * Reset CPU1 before configuring, otherwise kexec will
+	 * end up trying to use old kernel startup address.
+	 */
+	if (cfg.cpu1_rstctrl_va) {
+		writel_relaxed(1, cfg.cpu1_rstctrl_va);
+		readl_relaxed(cfg.cpu1_rstctrl_va);
+		writel_relaxed(0, cfg.cpu1_rstctrl_va);
+	}
 
 	/*
 	 * Write the address of secondary startup routine into the
@@ -226,27 +316,19 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	 * A barrier is added to ensure that write buffer is drained
 	 */
 	if (omap_secure_apis_support())
-		omap_auxcoreboot_addr(virt_to_phys(startup_addr));
+		omap_auxcoreboot_addr(virt_to_phys(cfg.startup_addr));
 	else
-		/*
-		 * If the boot CPU is in HYP mode then start secondary
-		 * CPU in HYP mode as well.
-		 */
-		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
-			writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup),
-				       base + OMAP_AUX_CORE_BOOT_1);
-		else
-			writel_relaxed(virt_to_phys(omap5_secondary_startup),
-				       base + OMAP_AUX_CORE_BOOT_1);
-
+		writel_relaxed(virt_to_phys(cfg.startup_addr),
+			       base + OMAP_AUX_CORE_BOOT_1);
 }
 
-struct smp_operations omap4_smp_ops __initdata = {
+const struct smp_operations omap4_smp_ops __initconst = {
 	.smp_init_cpus		= omap4_smp_init_cpus,
 	.smp_prepare_cpus	= omap4_smp_prepare_cpus,
 	.smp_secondary_init	= omap4_secondary_init,
 	.smp_boot_secondary	= omap4_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= omap4_cpu_die,
+	.cpu_kill		= omap4_cpu_kill,
 #endif
 };
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index e1d2e991d..0c4754386 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
@@ -273,6 +274,10 @@ static inline void omap5_irq_save_context(void)
  */
 static void irq_save_context(void)
 {
+	/* DRA7 has no SAR to save */
+	if (soc_is_dra7xx())
+		return;
+
 	if (!sar_base)
 		sar_base = omap4_get_sar_ram_base();
 
@@ -289,6 +294,9 @@ static void irq_sar_clear(void)
 {
 	u32 val;
 	u32 offset = SAR_BACKUP_STATUS_OFFSET;
+	/* DRA7 has no SAR to save */
+	if (soc_is_dra7xx())
+		return;
 
 	if (soc_is_omap54xx())
 		offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
@@ -319,6 +327,11 @@ static int irq_cpu_hotplug_notify(struct notifier_block *self,
 {
 	unsigned int cpu = (unsigned int)hcpu;
 
+	/*
+	 * Corresponding FROZEN transitions do not have to be handled,
+	 * they are handled by at a higher level
+	 * (drivers/cpuidle/coupled.c).
+	 */
 	switch (action) {
 	case CPU_ONLINE:
 		wakeupgen_irqmask_all(cpu, 0);
@@ -330,7 +343,7 @@ static int irq_cpu_hotplug_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __refdata irq_hotplug_notifier = {
+static struct notifier_block irq_hotplug_notifier = {
 	.notifier_call = irq_cpu_hotplug_notify,
 };
 
@@ -399,40 +412,42 @@ static struct irq_chip wakeupgen_chip = {
 #endif
 };
 
-static int wakeupgen_domain_xlate(struct irq_domain *domain,
-				  struct device_node *controller,
-				  const u32 *intspec,
-				  unsigned int intsize,
-				  unsigned long *out_hwirq,
-				  unsigned int *out_type)
+static int wakeupgen_domain_translate(struct irq_domain *d,
+				      struct irq_fwspec *fwspec,
+				      unsigned long *hwirq,
+				      unsigned int *type)
 {
-	if (domain->of_node != controller)
-		return -EINVAL;	/* Shouldn't happen, really... */
-	if (intsize != 3)
-		return -EINVAL;	/* Not GIC compliant */
-	if (intspec[0] != 0)
-		return -EINVAL;	/* No PPI should point to this domain */
+	if (is_of_node(fwspec->fwnode)) {
+		if (fwspec->param_count != 3)
+			return -EINVAL;
 
-	*out_hwirq = intspec[1];
-	*out_type = intspec[2];
-	return 0;
+		/* No PPI should point to this domain */
+		if (fwspec->param[0] != 0)
+			return -EINVAL;
+
+		*hwirq = fwspec->param[1];
+		*type = fwspec->param[2];
+		return 0;
+	}
+
+	return -EINVAL;
 }
 
 static int wakeupgen_domain_alloc(struct irq_domain *domain,
 				  unsigned int virq,
 				  unsigned int nr_irqs, void *data)
 {
-	struct of_phandle_args *args = data;
-	struct of_phandle_args parent_args;
+	struct irq_fwspec *fwspec = data;
+	struct irq_fwspec parent_fwspec;
 	irq_hw_number_t hwirq;
 	int i;
 
-	if (args->args_count != 3)
+	if (fwspec->param_count != 3)
 		return -EINVAL;	/* Not GIC compliant */
-	if (args->args[0] != 0)
+	if (fwspec->param[0] != 0)
 		return -EINVAL;	/* No PPI should point to this domain */
 
-	hwirq = args->args[1];
+	hwirq = fwspec->param[1];
 	if (hwirq >= MAX_IRQS)
 		return -EINVAL;	/* Can't deal with this */
 
@@ -440,15 +455,16 @@ static int wakeupgen_domain_alloc(struct irq_domain *domain,
 		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
 					      &wakeupgen_chip, NULL);
 
-	parent_args = *args;
-	parent_args.np = domain->parent->of_node;
-	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
+	parent_fwspec = *fwspec;
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+					    &parent_fwspec);
 }
 
 static const struct irq_domain_ops wakeupgen_domain_ops = {
-	.xlate	= wakeupgen_domain_xlate,
-	.alloc	= wakeupgen_domain_alloc,
-	.free	= irq_domain_free_irqs_common,
+	.translate	= wakeupgen_domain_translate,
+	.alloc		= wakeupgen_domain_alloc,
+	.free		= irq_domain_free_irqs_common,
 };
 
 /*
@@ -537,9 +553,4 @@ static int __init wakeupgen_init(struct device_node *node,
 
 	return 0;
 }
-
-/*
- * We cannot use the IRQCHIP_DECLARE macro that lives in
- * drivers/irqchip, so we're forced to roll our own. Not very nice.
- */
-OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
+IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c
index d937b2e40..497269db8 100644
--- a/arch/arm/mach-omap2/omap2-restart.c
+++ b/arch/arm/mach-omap2/omap2-restart.c
@@ -62,4 +62,4 @@ static int __init omap2xxx_common_look_up_clks_for_reset(void)
 
 	return 0;
 }
-omap_core_initcall(omap2xxx_common_look_up_clks_for_reset);
+omap_postcore_initcall(omap2xxx_common_look_up_clks_for_reset);
diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c
index 103a49f68..4bdd22edb 100644
--- a/arch/arm/mach-omap2/omap3-restart.c
+++ b/arch/arm/mach-omap2/omap3-restart.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/reboot.h>
 
+#include "common.h"
 #include "control.h"
 #include "prm.h"
 
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 16350eefa..cf65ab8bb 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -51,6 +51,127 @@ static void __iomem *twd_base;
 
 #define IRQ_LOCALTIMER		29
 
+#ifdef CONFIG_OMAP_INTERCONNECT_BARRIER
+
+/* Used to implement memory barrier on DRAM path */
+#define OMAP4_DRAM_BARRIER_VA			0xfe600000
+
+static void __iomem *dram_sync, *sram_sync;
+static phys_addr_t dram_sync_paddr;
+static u32 dram_sync_size;
+
+/*
+ * The OMAP4 bus structure contains asynchronous bridges which can buffer
+ * data writes from the MPU. These asynchronous bridges can be found on
+ * paths between the MPU to EMIF, and the MPU to L3 interconnects.
+ *
+ * We need to be careful about re-ordering which can happen as a result
+ * of different accesses being performed via different paths, and
+ * therefore different asynchronous bridges.
+ */
+
+/*
+ * OMAP4 interconnect barrier which is called for each mb() and wmb().
+ * This is to ensure that normal paths to DRAM (normal memory, cacheable
+ * accesses) are properly synchronised with writes to DMA coherent memory
+ * (normal memory, uncacheable) and device writes.
+ *
+ * The mb() and wmb() barriers only operate only on the MPU->MA->EMIF
+ * path, as we need to ensure that data is visible to other system
+ * masters prior to writes to those system masters being seen.
+ *
+ * Note: the SRAM path is not synchronised via mb() and wmb().
+ */
+static void omap4_mb(void)
+{
+	if (dram_sync)
+		writel_relaxed(0, dram_sync);
+}
+
+/*
+ * OMAP4 Errata i688 - asynchronous bridge corruption when entering WFI.
+ *
+ * If a data is stalled inside asynchronous bridge because of back
+ * pressure, it may be accepted multiple times, creating pointer
+ * misalignment that will corrupt next transfers on that data path until
+ * next reset of the system. No recovery procedure once the issue is hit,
+ * the path remains consistently broken.
+ *
+ * Async bridges can be found on paths between MPU to EMIF and MPU to L3
+ * interconnects.
+ *
+ * This situation can happen only when the idle is initiated by a Master
+ * Request Disconnection (which is trigged by software when executing WFI
+ * on the CPU).
+ *
+ * The work-around for this errata needs all the initiators connected
+ * through an async bridge to ensure that data path is properly drained
+ * before issuing WFI. This condition will be met if one Strongly ordered
+ * access is performed to the target right before executing the WFI.
+ *
+ * In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
+ * IO barrier ensure that there is no synchronisation loss on initiators
+ * operating on both interconnect port simultaneously.
+ *
+ * This is a stronger version of the OMAP4 memory barrier below, and
+ * operates on both the MPU->MA->EMIF path but also the MPU->OCP path
+ * as well, and is necessary prior to executing a WFI.
+ */
+void omap_interconnect_sync(void)
+{
+	if (dram_sync && sram_sync) {
+		writel_relaxed(readl_relaxed(dram_sync), dram_sync);
+		writel_relaxed(readl_relaxed(sram_sync), sram_sync);
+		isb();
+	}
+}
+
+static int __init omap4_sram_init(void)
+{
+	struct device_node *np;
+	struct gen_pool *sram_pool;
+
+	np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
+	if (!np)
+		pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",
+			__func__);
+	sram_pool = of_gen_pool_get(np, "sram", 0);
+	if (!sram_pool)
+		pr_warn("%s:Unable to get sram pool needed to handle errata I688\n",
+			__func__);
+	else
+		sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+
+	return 0;
+}
+omap_arch_initcall(omap4_sram_init);
+
+/* Steal one page physical memory for barrier implementation */
+void __init omap_barrier_reserve_memblock(void)
+{
+	dram_sync_size = ALIGN(PAGE_SIZE, SZ_1M);
+	dram_sync_paddr = arm_memblock_steal(dram_sync_size, SZ_1M);
+}
+
+void __init omap_barriers_init(void)
+{
+	struct map_desc dram_io_desc[1];
+
+	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
+	dram_io_desc[0].pfn = __phys_to_pfn(dram_sync_paddr);
+	dram_io_desc[0].length = dram_sync_size;
+	dram_io_desc[0].type = MT_MEMORY_RW_SO;
+	iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
+	dram_sync = (void __iomem *) dram_io_desc[0].virtual;
+
+	pr_info("OMAP4: Map %pa to %p for dram barrier\n",
+		&dram_sync_paddr, dram_sync);
+
+	soc_mb = omap4_mb;
+}
+
+#endif
+
 void gic_dist_disable(void)
 {
 	if (gic_dist_base_addr)
@@ -145,10 +266,11 @@ void __iomem *omap4_get_sar_ram_base(void)
 }
 
 /*
- * SAR RAM used to save and restore the HW
- * context in low power modes
+ * SAR RAM used to save and restore the HW context in low power modes.
+ * Note that we need to initialize this very early for kexec. See
+ * omap4_mpuss_early_init().
  */
-static int __init omap4_sar_ram_init(void)
+void __init omap4_sar_ram_init(void)
 {
 	unsigned long sar_base;
 
@@ -161,16 +283,13 @@ static int __init omap4_sar_ram_init(void)
 	else if (soc_is_omap54xx())
 		sar_base = OMAP54XX_SAR_RAM_BASE;
 	else
-		return -ENOMEM;
+		return;
 
 	/* Static mapping, never released */
 	sar_ram_base = ioremap(sar_base, SZ_16K);
 	if (WARN_ON(!sar_ram_base))
-		return -ENOMEM;
-
-	return 0;
+		return;
 }
-omap_early_initcall(omap4_sar_ram_init);
 
 static const struct of_device_id intc_match[] = {
 	{ .compatible = "ti,omap4-wugen-mpu", },
diff --git a/arch/arm/mach-omap2/omap4-restart.c b/arch/arm/mach-omap2/omap4-restart.c
index a99e7f7fb..e17136a50 100644
--- a/arch/arm/mach-omap2/omap4-restart.c
+++ b/arch/arm/mach-omap2/omap4-restart.c
@@ -9,6 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/reboot.h>
+#include "common.h"
 #include "prm.h"
 
 /**
diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h
index 2d35c5709..0ca8e9380 100644
--- a/arch/arm/mach-omap2/omap54xx.h
+++ b/arch/arm/mach-omap2/omap54xx.h
@@ -30,6 +30,14 @@
 #define OMAP54XX_CTRL_BASE		0x4a002800
 #define OMAP54XX_SAR_RAM_BASE		0x4ae26000
 
+/* DRA7 specific base addresses */
+#define L3_MAIN_SN_DRA7XX_BASE		0x44000000
+#define L4_PER1_DRA7XX_BASE		0x48000000
+#define L4_CFG_MPU_DRA7XX_BASE		0x48210000
+#define L4_PER2_DRA7XX_BASE		0x48400000
+#define L4_PER3_DRA7XX_BASE		0x48800000
+#define L4_CFG_DRA7XX_BASE		0x4A000000
+#define L4_WKUP_DRA7XX_BASE		0x4ae00000
 #define DRA7XX_CM_CORE_AON_BASE		0x4a005000
 #define DRA7XX_CTRL_BASE		0x4a003400
 #define DRA7XX_TAP_BASE			0x4ae0c000
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 4cb8fd9f7..e920dd83e 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -32,6 +32,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/notifier.h>
@@ -62,7 +63,22 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
 		return;
 	}
 
-	rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev), clk_name, NULL);
+	r = clk_get_sys(NULL, clk_name);
+
+	if (IS_ERR(r) && of_have_populated_dt()) {
+		struct of_phandle_args clkspec;
+
+		clkspec.np = of_find_node_by_name(NULL, clk_name);
+
+		r = of_clk_get_from_provider(&clkspec);
+
+		rc = clk_register_clkdev(r, clk_alias,
+					 dev_name(&od->pdev->dev));
+	} else {
+		rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev),
+				   clk_name, NULL);
+	}
+
 	if (rc) {
 		if (rc == -ENODEV || rc == -ENOMEM)
 			dev_err(&od->pdev->dev,
@@ -168,7 +184,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 			r->name = dev_name(&pdev->dev);
 	}
 
-	pdev->dev.pm_domain = &omap_device_pm_domain;
+	dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain);
 
 	if (device_active) {
 		omap_device_enable(pdev);
@@ -180,7 +196,7 @@ odbfd_exit1:
 odbfd_exit:
 	/* if data/we are at fault.. load up a fail handler */
 	if (ret)
-		pdev->dev.pm_domain = &omap_device_fail_pm_domain;
+		dev_pm_domain_set(&pdev->dev, &omap_device_fail_pm_domain);
 
 	return ret;
 }
@@ -190,12 +206,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od;
+	int err;
 
 	switch (event) {
-	case BUS_NOTIFY_DEL_DEVICE:
+	case BUS_NOTIFY_REMOVED_DEVICE:
 		if (pdev->archdata.od)
 			omap_device_delete(pdev->archdata.od);
 		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		od = to_omap_device(pdev);
+		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) {
+			dev_info(dev, "enabled after unload, idling\n");
+			err = omap_device_idle(pdev);
+			if (err)
+				dev_err(dev, "failed to idle\n");
+		}
+		break;
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);
@@ -257,7 +283,7 @@ static int _omap_device_idle_hwmods(struct omap_device *od)
  * function returns a value different than the value the caller got
  * the last time it called this function.
  *
- * If any hwmods exist for the omap_device assoiated with @pdev,
+ * If any hwmods exist for the omap_device associated with @pdev,
  * return the context loss counter for that hwmod, otherwise return
  * zero.
  */
@@ -601,8 +627,10 @@ static int _od_runtime_resume(struct device *dev)
 	int ret;
 
 	ret = omap_device_enable(pdev);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n");
 		return ret;
+	}
 
 	return pm_generic_runtime_resume(dev);
 }
@@ -701,7 +729,7 @@ int omap_device_register(struct platform_device *pdev)
 {
 	pr_debug("omap_device: %s: registering\n", pdev->name);
 
-	pdev->dev.pm_domain = &omap_device_pm_domain;
+	dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain);
 	return platform_device_add(pdev);
 }
 
@@ -869,7 +897,7 @@ static int __init omap_device_init(void)
 	bus_register_notifier(&platform_bus_type, &platform_nb);
 	return 0;
 }
-omap_core_initcall(omap_device_init);
+omap_postcore_initcall(omap_device_init);
 
 /**
  * omap_device_late_idle - idle devices without drivers
@@ -901,7 +929,8 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
 		if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE)
 			return 0;
 
-	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER &&
+	    od->_driver_status != BUS_NOTIFY_BIND_DRIVER) {
 		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
 			dev_warn(dev, "%s: enabled but no driver.  Idling\n",
 				 __func__);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 486cc4ded..1052b2969 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -130,6 +130,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/err.h>
@@ -177,6 +178,11 @@
  */
 #define OMAP4_RST_CTRL_ST_OFFSET	4
 
+/*
+ * Maximum length for module clock handle names
+ */
+#define MOD_CLK_MAX_NAME_LEN		32
+
 /**
  * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
  * @enable_module: function to enable a module (via MODULEMODE)
@@ -199,6 +205,7 @@ struct omap_hwmod_soc_ops {
 	int (*init_clkdm)(struct omap_hwmod *oh);
 	void (*update_context_lost)(struct omap_hwmod *oh);
 	int (*get_context_lost)(struct omap_hwmod *oh);
+	int (*disable_direct_prcm)(struct omap_hwmod *oh);
 };
 
 /* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */
@@ -299,7 +306,20 @@ static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
 
 	/* Module might have lost context, always update cache and register */
 	oh->_sysc_cache = v;
+
+	/*
+	 * Some IP blocks (such as RTC) require unlocking of IP before
+	 * accessing its registers. If a function pointer is present
+	 * to unlock, then call it before accessing sysconfig and
+	 * call lock after writing sysconfig.
+	 */
+	if (oh->class->unlock)
+		oh->class->unlock(oh);
+
 	omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
+
+	if (oh->class->lock)
+		oh->class->lock(oh);
 }
 
 /**
@@ -762,17 +782,35 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
  * @oh: struct omap_hwmod *
  *
  * Called from _init_clocks().  Populates the @oh _clk (main
- * functional clock pointer) if a main_clk is present.  Returns 0 on
- * success or -EINVAL on error.
+ * functional clock pointer) if a clock matching the hwmod name is found,
+ * or a main_clk is present.  Returns 0 on success or -EINVAL on error.
  */
 static int _init_main_clk(struct omap_hwmod *oh)
 {
 	int ret = 0;
+	char name[MOD_CLK_MAX_NAME_LEN];
+	struct clk *clk;
 
-	if (!oh->main_clk)
-		return 0;
+	/* +7 magic comes from '_mod_ck' suffix */
+	if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN)
+		pr_warn("%s: warning: cropping name for %s\n", __func__,
+			oh->name);
+
+	strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7);
+	strcat(name, "_mod_ck");
+
+	clk = clk_get(NULL, name);
+	if (!IS_ERR(clk)) {
+		oh->_clk = clk;
+		soc_ops.disable_direct_prcm(oh);
+		oh->main_clk = kstrdup(name, GFP_KERNEL);
+	} else {
+		if (!oh->main_clk)
+			return 0;
+
+		oh->_clk = clk_get(NULL, oh->main_clk);
+	}
 
-	oh->_clk = clk_get(NULL, oh->main_clk);
 	if (IS_ERR(oh->_clk)) {
 		pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",
 			oh->name, oh->main_clk);
@@ -876,6 +914,36 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 	return ret;
 }
 
+static void _enable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
+				 __clk_get_name(oc->_clk));
+			clk_enable(oc->_clk);
+		}
+}
+
+static void _disable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
+				 __clk_get_name(oc->_clk));
+			clk_disable(oc->_clk);
+		}
+}
+
 /**
  * _enable_clocks - enable hwmod main clock and interface clocks
  * @oh: struct omap_hwmod *
@@ -903,6 +971,9 @@ static int _enable_clocks(struct omap_hwmod *oh)
 			clk_enable(os->_clk);
 	}
 
+	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+		_enable_optional_clocks(oh);
+
 	/* The opt clocks are controlled by the device driver. */
 
 	return 0;
@@ -934,41 +1005,14 @@ static int _disable_clocks(struct omap_hwmod *oh)
 			clk_disable(os->_clk);
 	}
 
+	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+		_disable_optional_clocks(oh);
+
 	/* The opt clocks are controlled by the device driver. */
 
 	return 0;
 }
 
-static void _enable_optional_clocks(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_opt_clk *oc;
-	int i;
-
-	pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
-
-	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
-		if (oc->_clk) {
-			pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
-				 __clk_get_name(oc->_clk));
-			clk_enable(oc->_clk);
-		}
-}
-
-static void _disable_optional_clocks(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_opt_clk *oc;
-	int i;
-
-	pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
-
-	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
-		if (oc->_clk) {
-			pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
-				 __clk_get_name(oc->_clk));
-			clk_disable(oc->_clk);
-		}
-}
-
 /**
  * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4
  * @oh: struct omap_hwmod *
@@ -1009,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
 					oh->clkdm->cm_inst,
 					oh->prcm.omap4.clkctrl_offs, 0);
@@ -1396,9 +1444,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	/* If the cached value is the same as the new value, skip the write */
-	if (oh->_sysc_cache != v)
-		_write_sysconfig(v, oh);
+	_write_sysconfig(v, oh);
 
 	/*
 	 * Set the autoidle bit only after setting the smartidle bit
@@ -1461,7 +1507,9 @@ static void _idle_sysc(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	_write_sysconfig(v, oh);
+	/* If the cached value is the same as the new value, skip the write */
+	if (oh->_sysc_cache != v)
+		_write_sysconfig(v, oh);
 }
 
 /**
@@ -1658,7 +1706,6 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
 	int ret = -EINVAL;
-	int hwsup = 0;
 
 	if (!oh)
 		return -EINVAL;
@@ -1676,7 +1723,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 		 * might not be completed. The clockdomain can be set
 		 * in HW_AUTO only when the module become ready.
 		 */
-		hwsup = clkdm_in_hwsup(oh->clkdm);
+		clkdm_deny_idle(oh->clkdm);
 		ret = clkdm_hwmod_enable(oh->clkdm, oh);
 		if (ret) {
 			WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
@@ -1703,8 +1750,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 		 * Set the clockdomain to HW_AUTO, assuming that the
 		 * previous state was HW_AUTO.
 		 */
-		if (hwsup)
-			clkdm_allow_idle(oh->clkdm);
+		clkdm_allow_idle(oh->clkdm);
 
 		clkdm_hwmod_disable(oh->clkdm, oh);
 	}
@@ -2058,7 +2104,6 @@ static int _enable_preprogram(struct omap_hwmod *oh)
 static int _enable(struct omap_hwmod *oh)
 {
 	int r;
-	int hwsup = 0;
 
 	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
 
@@ -2118,8 +2163,7 @@ static int _enable(struct omap_hwmod *oh)
 		 * completely the module. The clockdomain can be set
 		 * in HW_AUTO only when the module become ready.
 		 */
-		hwsup = clkdm_in_hwsup(oh->clkdm) &&
-			!clkdm_missing_idle_reporting(oh->clkdm);
+		clkdm_deny_idle(oh->clkdm);
 		r = clkdm_hwmod_enable(oh->clkdm, oh);
 		if (r) {
 			WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
@@ -2139,14 +2183,10 @@ static int _enable(struct omap_hwmod *oh)
 
 	r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
 		-EINVAL;
-	if (!r) {
-		/*
-		 * Set the clockdomain to HW_AUTO only if the target is ready,
-		 * assuming that the previous state was HW_AUTO
-		 */
-		if (oh->clkdm && hwsup)
-			clkdm_allow_idle(oh->clkdm);
+	if (oh->clkdm)
+		clkdm_allow_idle(oh->clkdm);
 
+	if (!r) {
 		oh->_state = _HWMOD_STATE_ENABLED;
 
 		/* Access the sysconfig only if the target is ready */
@@ -2180,21 +2220,29 @@ static int _enable(struct omap_hwmod *oh)
  */
 static int _idle(struct omap_hwmod *oh)
 {
+	if (oh->flags & HWMOD_NO_IDLE) {
+		oh->_int_flags |= _HWMOD_SKIP_ENABLE;
+		return 0;
+	}
+
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
+	if (_are_all_hardreset_lines_asserted(oh))
+		return 0;
+
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
 		WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
 			oh->name);
 		return -EINVAL;
 	}
 
-	if (_are_all_hardreset_lines_asserted(oh))
-		return 0;
-
 	if (oh->class->sysc)
 		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
 
+	if (oh->clkdm)
+		clkdm_deny_idle(oh->clkdm);
+
 	if (oh->flags & HWMOD_BLOCK_WFI)
 		cpu_idle_poll_ctrl(false);
 	if (soc_ops.disable_module)
@@ -2207,8 +2255,10 @@ static int _idle(struct omap_hwmod *oh)
 	 * transition to complete properly.
 	 */
 	_disable_clocks(oh);
-	if (oh->clkdm)
+	if (oh->clkdm) {
+		clkdm_allow_idle(oh->clkdm);
 		clkdm_hwmod_disable(oh->clkdm, oh);
+	}
 
 	/* Mux pins for device idle if populated */
 	if (oh->mux && oh->mux->pads_dynamic) {
@@ -2237,6 +2287,9 @@ static int _shutdown(struct omap_hwmod *oh)
 	int ret, i;
 	u8 prev_state;
 
+	if (_are_all_hardreset_lines_asserted(oh))
+		return 0;
+
 	if (oh->_state != _HWMOD_STATE_IDLE &&
 	    oh->_state != _HWMOD_STATE_ENABLED) {
 		WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
@@ -2244,9 +2297,6 @@ static int _shutdown(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
-	if (_are_all_hardreset_lines_asserted(oh))
-		return 0;
-
 	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
 
 	if (oh->class->pre_shutdown) {
@@ -2484,6 +2534,8 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 			oh->flags |= HWMOD_INIT_NO_RESET;
 		if (of_find_property(np, "ti,no-idle-on-init", NULL))
 			oh->flags |= HWMOD_INIT_NO_IDLE;
+		if (of_find_property(np, "ti,no-idle", NULL))
+			oh->flags |= HWMOD_NO_IDLE;
 	}
 
 	oh->_state = _HWMOD_STATE_INITIALIZED;
@@ -2610,7 +2662,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh)
 	 * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
 	 * it should be set by the core code as a runtime flag during startup
 	 */
-	if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
+	if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) &&
 	    (postsetup_state == _HWMOD_STATE_IDLE)) {
 		oh->_int_flags |= _HWMOD_SKIP_ENABLE;
 		postsetup_state = _HWMOD_STATE_ENABLED;
@@ -2923,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
 	if (!_find_mpu_rt_port(oh))
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	/* XXX check module SIDLEMODE, hardreset status */
 
 	return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,
@@ -3064,6 +3120,25 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
 }
 
 /**
+ * _omap4_disable_direct_prcm - disable direct PRCM control for hwmod
+ * @oh: struct omap_hwmod * to disable control for
+ *
+ * Disables direct PRCM clkctrl done by hwmod core. Instead, the hwmod
+ * will be using its main_clk to enable/disable the module. Returns
+ * 0 if successful.
+ */
+static int _omap4_disable_direct_prcm(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	oh->prcm.omap4.clkctrl_offs = 0;
+	oh->prcm.omap4.modulemode = 0;
+
+	return 0;
+}
+
+/**
  * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
  * @oh: struct omap_hwmod * to deassert hardreset
  * @ohri: hardreset line data
@@ -3293,7 +3368,7 @@ static int __init omap_hwmod_setup_all(void)
 
 	return 0;
 }
-omap_core_initcall(omap_hwmod_setup_all);
+omap_postcore_initcall(omap_hwmod_setup_all);
 
 /**
  * omap_hwmod_enable - enable an omap_hwmod
@@ -3886,7 +3961,9 @@ void __init omap_hwmod_init(void)
 		soc_ops.init_clkdm = _init_clkdm;
 		soc_ops.update_context_lost = _omap4_update_context_lost;
 		soc_ops.get_context_lost = _omap4_get_context_lost;
-	} else if (cpu_is_ti816x() || soc_is_am33xx() || soc_is_am43xx()) {
+		soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm;
+	} else if (cpu_is_ti814x() || cpu_is_ti816x() || soc_is_am33xx() ||
+		   soc_is_am43xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
 		soc_ops.wait_target_ready = _omap4_wait_target_ready;
@@ -3894,6 +3971,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
 		soc_ops.init_clkdm = _init_clkdm;
+		soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm;
 	} else {
 		WARN(1, "omap_hwmod: unknown SoC type\n");
 	}
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index b5d27ec81..78904017f 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm {
  * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
  *     module-level context loss register associated with them; this
  *     flag bit should be set in those cases
+ * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
+ *	offset of zero; this flag bit should be set in those cases to
+ *	distinguish from hwmods that have no clkctrl offset.
  */
 #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
+#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET		(1 << 1)
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
@@ -523,6 +527,10 @@ struct omap_hwmod_omap4_prcm {
  * HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up 
  *     events by calling _reconfigure_io_chain() when a device is enabled
  *     or idled.
+ * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
+ *     operate and they need to be handled at the same time as the main_clk.
+ * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
+ *     IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -538,6 +546,8 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_FORCE_MSTANDBY			(1 << 11)
 #define HWMOD_SWSUP_SIDLE_ACT			(1 << 12)
 #define HWMOD_RECONFIG_IO_CHAIN			(1 << 13)
+#define HWMOD_OPT_CLKS_NEEDED			(1 << 14)
+#define HWMOD_NO_IDLE				(1 << 15)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -576,6 +586,8 @@ struct omap_hwmod_omap4_prcm {
  * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
  * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
  * @enable_preprogram:  ptr to fn to be executed during device enable
+ * @lock: ptr to fn to be executed to lock IP registers
+ * @unlock: ptr to fn to be executed to unlock IP registers
  *
  * Represent the class of a OMAP hardware "modules" (e.g. timer,
  * smartreflex, gpio, uart...)
@@ -600,6 +612,8 @@ struct omap_hwmod_class {
 	int					(*pre_shutdown)(struct omap_hwmod *oh);
 	int					(*reset)(struct omap_hwmod *oh);
 	int					(*enable_preprogram)(struct omap_hwmod *oh);
+	void					(*lock)(struct omap_hwmod *oh);
+	void					(*unlock)(struct omap_hwmod *oh);
 };
 
 /**
@@ -744,6 +758,8 @@ const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
  */
 
 extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
+void omap_hwmod_rtc_unlock(struct omap_hwmod *oh);
+void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
 
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
@@ -755,7 +771,8 @@ extern int omap3xxx_hwmod_init(void);
 extern int omap44xx_hwmod_init(void);
 extern int omap54xx_hwmod_init(void);
 extern int am33xx_hwmod_init(void);
-extern int ti81xx_hwmod_init(void);
+extern int dm814x_hwmod_init(void);
+extern int dm816x_hwmod_init(void);
 extern int dra7xx_hwmod_init(void);
 int am43xx_hwmod_init(void);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 6dcfd03ce..36bcd2e75 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -20,7 +20,7 @@
 #include "prm-regbits-24xx.h"
 #include "wd_timer.h"
 
-struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
+static struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
 	{ .name = "dispc", .dma_req = 5 },
 	{ .dma_req = -1, },
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 7f737965f..d3e61d1a0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -36,17 +36,8 @@ extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3;
 extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2;
 extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
 extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2;
 extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3;
@@ -98,17 +89,8 @@ extern struct omap_hwmod am33xx_dcan0_hwmod;
 extern struct omap_hwmod am33xx_dcan1_hwmod;
 extern struct omap_hwmod am33xx_elm_hwmod;
 extern struct omap_hwmod am33xx_epwmss0_hwmod;
-extern struct omap_hwmod am33xx_ecap0_hwmod;
-extern struct omap_hwmod am33xx_eqep0_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm0_hwmod;
 extern struct omap_hwmod am33xx_epwmss1_hwmod;
-extern struct omap_hwmod am33xx_ecap1_hwmod;
-extern struct omap_hwmod am33xx_eqep1_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm1_hwmod;
 extern struct omap_hwmod am33xx_epwmss2_hwmod;
-extern struct omap_hwmod am33xx_ecap2_hwmod;
-extern struct omap_hwmod am33xx_eqep2_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm2_hwmod;
 extern struct omap_hwmod am33xx_gpio1_hwmod;
 extern struct omap_hwmod am33xx_gpio2_hwmod;
 extern struct omap_hwmod am33xx_gpio3_hwmod;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index 8f5989d48..10dff2f00 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -152,20 +152,10 @@ struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
-	{
-		.pa_start	= 0x48080000,
-		.pa_end		= 0x48080000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_elm_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_elm_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -186,28 +176,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ecap0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_eqep0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ehrpwm0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-
 static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
 	{
 		.pa_start	= 0x48302000,
@@ -225,27 +193,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ecap1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_eqep1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ehrpwm1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
 	{
 		.pa_start	= 0x48304000,
@@ -263,42 +210,11 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ecap2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_eqep2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ehrpwm2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3s cfg -> gpmc */
-static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
-	{
-		.pa_start	= 0x50000000,
-		.pa_end		= 0x50000000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
 	.master		= &am33xx_l3_s_hwmod,
 	.slave		= &am33xx_gpmc_hwmod,
 	.clk		= "l3s_gclk",
-	.addr		= am33xx_gpmc_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 907a452b7..e2d84aa7f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -29,6 +29,7 @@
 #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
 #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
 #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag))
 
 /*
  * 'l3' class
@@ -449,18 +450,6 @@ struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
 	.sysc		= &am33xx_epwmss_sysc,
 };
 
-static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
-	.name		= "ecap",
-};
-
-static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
-	.name		= "eqep",
-};
-
-struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
-	.name		= "ehrpwm",
-};
-
 /* epwmss0 */
 struct omap_hwmod am33xx_epwmss0_hwmod = {
 	.name		= "epwmss0",
@@ -474,30 +463,6 @@ struct omap_hwmod am33xx_epwmss0_hwmod = {
 	},
 };
 
-/* ecap0 */
-struct omap_hwmod am33xx_ecap0_hwmod = {
-	.name		= "ecap0",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep0 */
-struct omap_hwmod am33xx_eqep0_hwmod = {
-	.name		= "eqep0",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm0 */
-struct omap_hwmod am33xx_ehrpwm0_hwmod = {
-	.name		= "ehrpwm0",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 /* epwmss1 */
 struct omap_hwmod am33xx_epwmss1_hwmod = {
 	.name		= "epwmss1",
@@ -511,30 +476,6 @@ struct omap_hwmod am33xx_epwmss1_hwmod = {
 	},
 };
 
-/* ecap1 */
-struct omap_hwmod am33xx_ecap1_hwmod = {
-	.name		= "ecap1",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep1 */
-struct omap_hwmod am33xx_eqep1_hwmod = {
-	.name		= "eqep1",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm1 */
-struct omap_hwmod am33xx_ehrpwm1_hwmod = {
-	.name		= "ehrpwm1",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 /* epwmss2 */
 struct omap_hwmod am33xx_epwmss2_hwmod = {
 	.name		= "epwmss2",
@@ -548,30 +489,6 @@ struct omap_hwmod am33xx_epwmss2_hwmod = {
 	},
 };
 
-/* ecap2 */
-struct omap_hwmod am33xx_ecap2_hwmod = {
-	.name		= "ecap2",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep2 */
-struct omap_hwmod am33xx_eqep2_hwmod = {
-	.name		= "eqep2",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm2 */
-struct omap_hwmod am33xx_ehrpwm2_hwmod = {
-	.name		= "ehrpwm2",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 /*
  * 'gpio' class: for gpio 0,1,2,3
  */
@@ -918,6 +835,8 @@ static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
 static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
 	.name		= "rtc",
 	.sysc		= &am33xx_rtc_sysc,
+	.unlock		= &omap_hwmod_rtc_unlock,
+	.lock		= &omap_hwmod_rtc_lock,
 };
 
 struct omap_hwmod am33xx_rtc_hwmod = {
@@ -1378,6 +1297,7 @@ static void omap_hwmod_am33xx_clkctrl(void)
 	CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
@@ -1474,6 +1394,7 @@ static void omap_hwmod_am43xx_rst(void)
 {
 	RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET);
 	RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET);
+	RSTST(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTST_OFFSET);
 	RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET);
 }
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index cc0791d91..e1c2025d6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -593,17 +593,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_ls__spinlock,
 	&am33xx_l4_ls__elm,
 	&am33xx_l4_ls__epwmss0,
-	&am33xx_epwmss0__ecap0,
-	&am33xx_epwmss0__eqep0,
-	&am33xx_epwmss0__ehrpwm0,
 	&am33xx_l4_ls__epwmss1,
-	&am33xx_epwmss1__ecap1,
-	&am33xx_epwmss1__eqep1,
-	&am33xx_epwmss1__ehrpwm1,
 	&am33xx_l4_ls__epwmss2,
-	&am33xx_epwmss2__ecap2,
-	&am33xx_epwmss2__eqep2,
-	&am33xx_epwmss2__ehrpwm2,
 	&am33xx_l3_s__gpmc,
 	&am33xx_l3_main__lcdc,
 	&am33xx_l4_ls__mcspi0,
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index dc55f8ded..1cc4a6f39 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -25,8 +25,6 @@
 #include "l4_3xxx.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/iommu-omap.h>
-#include <linux/platform_data/mailbox-omap.h>
 #include <plat/dmtimer.h>
 
 #include "soc.h"
@@ -724,8 +722,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
  * display serial interface controller
  */
 
+static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.name = "dsi",
+	.sysc	= &omap3xxx_dsi_sysc,
 };
 
 static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
@@ -1324,16 +1334,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			 .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp2_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mcbsp3_sidetone */
@@ -1346,16 +1348,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp3_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* SR common */
@@ -1506,26 +1500,9 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
 	.sysc = &omap3xxx_mailbox_sysc,
 };
 
-static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = {
-	{ .name = "dsp", .tx_id = 0, .rx_id = 1 },
-};
-
-static struct omap_mbox_pdata omap3xxx_mailbox_attrs = {
-	.num_users	= 2,
-	.num_fifos	= 2,
-	.info_cnt	= ARRAY_SIZE(omap3xxx_mailbox_info),
-	.info		= omap3xxx_mailbox_info,
-};
-
-static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
-	{ .irq = 26 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
 static struct omap_hwmod omap3xxx_mailbox_hwmod = {
 	.name		= "mailbox",
 	.class		= &omap3xxx_mailbox_hwmod_class,
-	.mpu_irqs	= omap3xxx_mailbox_irqs,
 	.main_clk	= "mailboxes_ick",
 	.prcm		= {
 		.omap2 = {
@@ -1536,7 +1513,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
 		},
 	},
-	.dev_attr	= &omap3xxx_mailbox_attrs,
 };
 
 /*
@@ -2976,80 +2952,40 @@ static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = {
 };
 
 /* mmu isp */
-
-static struct omap_mmu_dev_attr mmu_isp_dev_attr = {
-	.nr_tlb_entries = 8,
-};
-
 static struct omap_hwmod omap3xxx_mmu_isp_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_mmu_isp_irqs[] = {
-	{ .irq = 24 + OMAP_INTC_START, },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mmu_isp_addrs[] = {
-	{
-		.pa_start	= 0x480bd400,
-		.pa_end		= 0x480bd47f,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 /* l4_core -> mmu isp */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmu_isp = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_mmu_isp_hwmod,
-	.addr		= omap3xxx_mmu_isp_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 static struct omap_hwmod omap3xxx_mmu_isp_hwmod = {
 	.name		= "mmu_isp",
 	.class		= &omap3xxx_mmu_hwmod_class,
-	.mpu_irqs	= omap3xxx_mmu_isp_irqs,
 	.main_clk	= "cam_ick",
-	.dev_attr	= &mmu_isp_dev_attr,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mmu iva */
 
-static struct omap_mmu_dev_attr mmu_iva_dev_attr = {
-	.nr_tlb_entries = 32,
-};
-
 static struct omap_hwmod omap3xxx_mmu_iva_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_mmu_iva_irqs[] = {
-	{ .irq = 28 + OMAP_INTC_START, },
-	{ .irq = -1 }
-};
 
 static struct omap_hwmod_rst_info omap3xxx_mmu_iva_resets[] = {
 	{ .name = "mmu", .rst_shift = 1, .st_shift = 9 },
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mmu_iva_addrs[] = {
-	{
-		.pa_start	= 0x5d000000,
-		.pa_end		= 0x5d00007f,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 /* l3_main -> iva mmu */
 static struct omap_hwmod_ocp_if omap3xxx_l3_main__mmu_iva = {
 	.master		= &omap3xxx_l3_main_hwmod,
 	.slave		= &omap3xxx_mmu_iva_hwmod,
-	.addr		= omap3xxx_mmu_iva_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
 	.name		= "mmu_iva",
 	.class		= &omap3xxx_mmu_hwmod_class,
-	.mpu_irqs	= omap3xxx_mmu_iva_irqs,
 	.clkdm_name	= "iva2_clkdm",
 	.rst_lines	= omap3xxx_mmu_iva_resets,
 	.rst_lines_cnt	= ARRAY_SIZE(omap3xxx_mmu_iva_resets),
@@ -3062,7 +2998,6 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
 		},
 	},
-	.dev_attr	= &mmu_iva_dev_attr,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
@@ -3276,20 +3211,10 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x48094000,
-		.pa_end		= 0x480941ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 /* l4_core -> mailbox */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_mailbox_hwmod,
-	.addr		= omap3xxx_mailbox_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3654,14 +3579,14 @@ static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
+static struct omap_hwmod_class omap3xxx_ssi_hwmod_class = {
 	.name	= "ssi",
 	.sysc	= &omap34xx_ssi_sysc,
 };
 
-static struct omap_hwmod omap34xx_ssi_hwmod = {
+static struct omap_hwmod omap3xxx_ssi_hwmod = {
 	.name		= "ssi",
-	.class		= &omap34xx_ssi_hwmod_class,
+	.class		= &omap3xxx_ssi_hwmod_class,
 	.clkdm_name	= "core_l4_clkdm",
 	.main_clk	= "ssi_ssr_fck",
 	.prcm		= {
@@ -3676,9 +3601,9 @@ static struct omap_hwmod omap34xx_ssi_hwmod = {
 };
 
 /* L4 CORE -> SSI */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = {
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__ssi = {
 	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_ssi_hwmod,
+	.slave		= &omap3xxx_ssi_hwmod,
 	.clk		= "ssi_ick",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -3831,7 +3756,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_sad2d__l3,
 	&omap3xxx_l4_core__mmu_isp,
 	&omap3xxx_l3_main__mmu_iva,
-	&omap34xx_l4_core__ssi,
+	&omap3xxx_l4_core__ssi,
 	NULL
 };
 
@@ -3855,6 +3780,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_sad2d__l3,
 	&omap3xxx_l4_core__mmu_isp,
 	&omap3xxx_l3_main__mmu_iva,
+	&omap3xxx_l4_core__ssi,
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 215d5efa0..61f2f301d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -202,13 +202,6 @@ static struct omap_hwmod am43xx_epwmss3_hwmod = {
 	},
 };
 
-static struct omap_hwmod am43xx_ehrpwm3_hwmod = {
-	.name		= "ehrpwm3",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 static struct omap_hwmod am43xx_epwmss4_hwmod = {
 	.name		= "epwmss4",
 	.class		= &am33xx_epwmss_hwmod_class,
@@ -222,13 +215,6 @@ static struct omap_hwmod am43xx_epwmss4_hwmod = {
 	},
 };
 
-static struct omap_hwmod am43xx_ehrpwm4_hwmod = {
-	.name		= "ehrpwm4",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 static struct omap_hwmod am43xx_epwmss5_hwmod = {
 	.name		= "epwmss5",
 	.class		= &am33xx_epwmss_hwmod_class,
@@ -242,13 +228,6 @@ static struct omap_hwmod am43xx_epwmss5_hwmod = {
 	},
 };
 
-static struct omap_hwmod am43xx_ehrpwm5_hwmod = {
-	.name		= "ehrpwm5",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 static struct omap_hwmod am43xx_spi2_hwmod = {
 	.name		= "spi2",
 	.class		= &am33xx_spi_hwmod_class,
@@ -480,7 +459,7 @@ static struct omap_hwmod am43xx_dss_core_hwmod = {
 
 /* dispc */
 
-struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
+static struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
 	.manager_count		= 1,
 	.has_framedonetv_irq	= 0
 };
@@ -744,13 +723,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = {
-	.master		= &am43xx_epwmss3_hwmod,
-	.slave		= &am43xx_ehrpwm3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am43xx_epwmss4_hwmod,
@@ -758,13 +730,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = {
-	.master		= &am43xx_epwmss4_hwmod,
-	.slave		= &am43xx_ehrpwm4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am43xx_epwmss5_hwmod,
@@ -772,13 +737,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = {
-	.master		= &am43xx_epwmss5_hwmod,
-	.slave		= &am43xx_ehrpwm5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am43xx_spi2_hwmod,
@@ -919,11 +877,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am43xx_l4_ls__timer10,
 	&am43xx_l4_ls__timer11,
 	&am43xx_l4_ls__epwmss3,
-	&am43xx_epwmss3__ehrpwm3,
 	&am43xx_l4_ls__epwmss4,
-	&am43xx_epwmss4__ehrpwm4,
 	&am43xx_l4_ls__epwmss5,
-	&am43xx_epwmss5__ehrpwm5,
 	&am43xx_l4_ls__mcspi2,
 	&am43xx_l4_ls__mcspi3,
 	&am43xx_l4_ls__mcspi4,
@@ -982,17 +937,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_ls__spinlock,
 	&am33xx_l4_ls__elm,
 	&am33xx_l4_ls__epwmss0,
-	&am33xx_epwmss0__ecap0,
-	&am33xx_epwmss0__eqep0,
-	&am33xx_epwmss0__ehrpwm0,
 	&am33xx_l4_ls__epwmss1,
-	&am33xx_epwmss1__ecap1,
-	&am33xx_epwmss1__eqep1,
-	&am33xx_epwmss1__ehrpwm1,
 	&am33xx_l4_ls__epwmss2,
-	&am33xx_epwmss2__ecap2,
-	&am33xx_epwmss2__eqep2,
-	&am33xx_epwmss2__ehrpwm2,
 	&am33xx_l3_s__gpmc,
 	&am33xx_l4_ls__mcspi0,
 	&am33xx_l4_ls__mcspi1,
@@ -1020,9 +966,21 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	NULL,
 };
 
+static struct omap_hwmod_ocp_if *am43xx_rtc_hwmod_ocp_ifs[] __initdata = {
+	&am33xx_l4_wkup__rtc,
+	NULL,
+};
+
 int __init am43xx_hwmod_init(void)
 {
+	int ret;
+
 	omap_hwmod_am43xx_reg();
 	omap_hwmod_init();
-	return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
+	ret = omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
+
+	if (!ret && of_machine_is_compatible("ti,am4372"))
+		ret = omap_hwmod_register_links(am43xx_rtc_hwmod_ocp_ifs);
+
+	return ret;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 43eebf2c5..dad871a4c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,7 +30,6 @@
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <linux/platform_data/iommu-omap.h>
 #include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
@@ -2088,30 +2087,16 @@ static struct omap_hwmod_class omap44xx_mmu_hwmod_class = {
 
 /* mmu ipu */
 
-static struct omap_mmu_dev_attr mmu_ipu_dev_attr = {
-	.nr_tlb_entries = 32,
-};
-
 static struct omap_hwmod omap44xx_mmu_ipu_hwmod;
 static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = {
 	{ .name = "mmu_cache", .rst_shift = 2 },
 };
 
-static struct omap_hwmod_addr_space omap44xx_mmu_ipu_addrs[] = {
-	{
-		.pa_start	= 0x55082000,
-		.pa_end		= 0x550820ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 /* l3_main_2 -> mmu_ipu */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_mmu_ipu_hwmod,
 	.clk		= "l3_div_ck",
-	.addr		= omap44xx_mmu_ipu_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2130,35 +2115,20 @@ static struct omap_hwmod omap44xx_mmu_ipu_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.dev_attr	= &mmu_ipu_dev_attr,
 };
 
 /* mmu dsp */
 
-static struct omap_mmu_dev_attr mmu_dsp_dev_attr = {
-	.nr_tlb_entries = 32,
-};
-
 static struct omap_hwmod omap44xx_mmu_dsp_hwmod;
 static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = {
 	{ .name = "mmu_cache", .rst_shift = 1 },
 };
 
-static struct omap_hwmod_addr_space omap44xx_mmu_dsp_addrs[] = {
-	{
-		.pa_start	= 0x4a066000,
-		.pa_end		= 0x4a0660ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 /* l4_cfg -> dsp */
 static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_mmu_dsp_hwmod,
 	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmu_dsp_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2177,7 +2147,6 @@ static struct omap_hwmod omap44xx_mmu_dsp_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.dev_attr	= &mmu_dsp_dev_attr,
 };
 
 /*
@@ -3915,21 +3884,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space omap44xx_elm_addrs[] = {
-	{
-		.pa_start	= 0x48078000,
-		.pa_end		= 0x48078fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_per -> elm */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__elm = {
 	.master		= &omap44xx_l4_per_hwmod,
 	.slave		= &omap44xx_elm_hwmod,
 	.clk		= "l4_div_ck",
-	.addr		= omap44xx_elm_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -4471,21 +4430,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = {
-	{
-		.pa_start	= 0x4a0f6000,
-		.pa_end		= 0x4a0f6fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_cfg -> spinlock */
 static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_spinlock_hwmod,
 	.clk		= "l4_div_ck",
-	.addr		= omap44xx_spinlock_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 7c3fac035..8cdfd9b7a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -1844,8 +1844,7 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_RESET_STATUS),
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 562247bce..1ab7096af 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -383,6 +383,68 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
 	},
 };
 
+/* pwmss  */
+static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+/*
+ * epwmss class
+ */
+static struct omap_hwmod_class dra7xx_epwmss_hwmod_class = {
+	.name		= "epwmss",
+	.sysc		= &dra7xx_epwmss_sysc,
+};
+
+/* epwmss0 */
+static struct omap_hwmod dra7xx_epwmss0_hwmod = {
+	.name		= "epwmss0",
+	.class		= &dra7xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+			.clkctrl_offs	= DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL_OFFSET,
+			.context_offs	= DRA7XX_RM_L4PER2_PWMSS1_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/* epwmss1 */
+static struct omap_hwmod dra7xx_epwmss1_hwmod = {
+	.name		= "epwmss1",
+	.class		= &dra7xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+			.clkctrl_offs	= DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL_OFFSET,
+			.context_offs	= DRA7XX_RM_L4PER2_PWMSS2_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/* epwmss2 */
+static struct omap_hwmod dra7xx_epwmss2_hwmod = {
+	.name		= "epwmss2",
+	.class		= &dra7xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+			.clkctrl_offs	= DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL_OFFSET,
+			.context_offs	= DRA7XX_RM_L4PER2_PWMSS3_CONTEXT_OFFSET,
+		},
+	},
+};
+
 /*
  * 'dma' class
  *
@@ -430,6 +492,67 @@ static struct omap_hwmod dra7xx_dma_system_hwmod = {
 };
 
 /*
+ * 'tpcc' class
+ *
+ */
+static struct omap_hwmod_class dra7xx_tpcc_hwmod_class = {
+	.name		= "tpcc",
+};
+
+static struct omap_hwmod dra7xx_tpcc_hwmod = {
+	.name		= "tpcc",
+	.class		= &dra7xx_tpcc_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'tptc' class
+ *
+ */
+static struct omap_hwmod_class dra7xx_tptc_hwmod_class = {
+	.name		= "tptc",
+};
+
+/* tptc0 */
+static struct omap_hwmod dra7xx_tptc0_hwmod = {
+	.name		= "tptc0",
+	.class		= &dra7xx_tptc_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "l3_iclk_div",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* tptc1 */
+static struct omap_hwmod dra7xx_tptc1_hwmod = {
+	.name		= "tptc1",
+	.class		= &dra7xx_tptc_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "l3_iclk_div",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'dss' class
  *
  */
@@ -1298,6 +1421,200 @@ static struct omap_hwmod dra7xx_mcspi4_hwmod = {
 };
 
 /*
+ * 'mcasp' class
+ *
+ */
+static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = {
+	.sysc_offs	= 0x0004,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = {
+	.name	= "mcasp",
+	.sysc	= &dra7xx_mcasp_sysc,
+};
+
+/* mcasp1 */
+static struct omap_hwmod_opt_clk mcasp1_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp1_ahclkx_mux" },
+	{ .role = "ahclkr", .clk = "mcasp1_ahclkr_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp1_hwmod = {
+	.name		= "mcasp1",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "mcasp1_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_MCASP1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_MCASP1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp1_opt_clks),
+};
+
+/* mcasp2 */
+static struct omap_hwmod_opt_clk mcasp2_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp2_ahclkx_mux" },
+	{ .role = "ahclkr", .clk = "mcasp2_ahclkr_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp2_hwmod = {
+	.name		= "mcasp2",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp2_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp2_opt_clks),
+};
+
+/* mcasp3 */
+static struct omap_hwmod_opt_clk mcasp3_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp3_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp3_hwmod = {
+	.name		= "mcasp3",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp3_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp3_opt_clks),
+};
+
+/* mcasp4 */
+static struct omap_hwmod_opt_clk mcasp4_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp4_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp4_hwmod = {
+	.name		= "mcasp4",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp4_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp4_opt_clks),
+};
+
+/* mcasp5 */
+static struct omap_hwmod_opt_clk mcasp5_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp5_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp5_hwmod = {
+	.name		= "mcasp5",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp5_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp5_opt_clks),
+};
+
+/* mcasp6 */
+static struct omap_hwmod_opt_clk mcasp6_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp6_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp6_hwmod = {
+	.name		= "mcasp6",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp6_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP6_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP6_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp6_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp6_opt_clks),
+};
+
+/* mcasp7 */
+static struct omap_hwmod_opt_clk mcasp7_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp7_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp7_hwmod = {
+	.name		= "mcasp7",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp7_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP7_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP7_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp7_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp7_opt_clks),
+};
+
+/* mcasp8 */
+static struct omap_hwmod_opt_clk mcasp8_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp8_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp8_hwmod = {
+	.name		= "mcasp8",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp8_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP8_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP8_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp8_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp8_opt_clks),
+};
+
+/*
  * 'mmc' class
  *
  */
@@ -1444,8 +1761,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_ocp2scp_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -1489,19 +1805,49 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
  *
  */
 
+/*
+ * As noted in documentation for _reset() in omap_hwmod.c, the stock reset
+ * functionality of OMAP HWMOD layer does not deassert the hardreset lines
+ * associated with an IP automatically leaving the driver to handle that
+ * by itself. This does not work for PCIeSS which needs the reset lines
+ * deasserted for the driver to start accessing registers.
+ *
+ * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset
+ * lines after asserting them.
+ */
+static int dra7xx_pciess_reset(struct omap_hwmod *oh)
+{
+	int i;
+
+	for (i = 0; i < oh->rst_lines_cnt; i++) {
+		omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name);
+		omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name);
+	}
+
+	return 0;
+}
+
 static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
 	.name	= "pcie",
+	.reset	= dra7xx_pciess_reset,
 };
 
 /* pcie1 */
+static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = {
+	{ .name = "pcie", .rst_shift = 0 },
+};
+
 static struct omap_hwmod dra7xx_pciess1_hwmod = {
 	.name		= "pcie1",
 	.class		= &dra7xx_pciess_hwmod_class,
 	.clkdm_name	= "pcie_clkdm",
+	.rst_lines	= dra7xx_pciess1_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess1_resets),
 	.main_clk	= "l4_root_clk_div",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
+			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
 			.context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
@@ -1509,14 +1855,22 @@ static struct omap_hwmod dra7xx_pciess1_hwmod = {
 };
 
 /* pcie2 */
+static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = {
+	{ .name = "pcie", .rst_shift = 1 },
+};
+
+/* pcie2 */
 static struct omap_hwmod dra7xx_pciess2_hwmod = {
 	.name		= "pcie2",
 	.class		= &dra7xx_pciess_hwmod_class,
 	.clkdm_name	= "pcie_clkdm",
+	.rst_lines	= dra7xx_pciess2_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess2_resets),
 	.main_clk	= "l4_root_clk_div",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
+			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
 			.context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET,
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
@@ -1571,6 +1925,8 @@ static struct omap_hwmod_class_sysconfig dra7xx_rtcss_sysc = {
 static struct omap_hwmod_class dra7xx_rtcss_hwmod_class = {
 	.name	= "rtcss",
 	.sysc	= &dra7xx_rtcss_sysc,
+	.unlock	= &omap_hwmod_rtc_unlock,
+	.lock	= &omap_hwmod_rtc_lock,
 };
 
 /* rtcss */
@@ -1929,6 +2285,20 @@ static struct omap_hwmod dra7xx_timer11_hwmod = {
 	},
 };
 
+/* timer12 */
+static struct omap_hwmod dra7xx_timer12_hwmod = {
+	.name		= "timer12",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "secure_32k_clk_src_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_TIMER12_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_TIMER12_CONTEXT_OFFSET,
+		},
+	},
+};
+
 /* timer13 */
 static struct omap_hwmod dra7xx_timer13_hwmod = {
 	.name		= "timer13",
@@ -2065,7 +2435,7 @@ static struct omap_hwmod dra7xx_uart4_hwmod = {
 	.class		= &dra7xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
 	.main_clk	= "uart4_gfclk_mux",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART4_FLAGS,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET,
@@ -2511,13 +2881,28 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = {
-	{
-		.name		= "family",
-		.pa_start	= 0x58000000,
-		.pa_end		= 0x5800007f,
-		.flags		= ADDR_TYPE_RT
-	},
+/* l3_main_1 -> tpcc */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_tpcc_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3_main_1 -> tptc0 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc0 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_tptc0_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3_main_1 -> tptc1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_tptc1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
 };
 
 /* l3_main_1 -> dss */
@@ -2525,54 +2910,111 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dss = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_dss_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_dss_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_dss_dispc_addrs[] = {
-	{
-		.name		= "dispc",
-		.pa_start	= 0x58001000,
-		.pa_end		= 0x58001fff,
-		.flags		= ADDR_TYPE_RT
-	},
-};
-
 /* l3_main_1 -> dispc */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dispc = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_dss_dispc_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_dss_dispc_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_dss_hdmi_addrs[] = {
-	{
-		.name		= "hdmi_wp",
-		.pa_start	= 0x58040000,
-		.pa_end		= 0x580400ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l3_main_1 -> dispc */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_dss_hdmi_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_dss_hdmi_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_elm_addrs[] = {
-	{
-		.pa_start	= 0x48078000,
-		.pa_end		= 0x48078fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
+/* l4_per2 -> mcasp1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp1 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp1_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> mcasp1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp1 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_mcasp1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp2 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp2_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> mcasp2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp2 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_mcasp2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp3_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> mcasp3 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp3 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_mcasp3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp4 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp4_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp5 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp5_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp6 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp6_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp7 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp7_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> mcasp8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp8 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp8_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_per1 -> elm */
@@ -2580,7 +3022,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
 	.master		= &dra7xx_l4_per1_hwmod,
 	.slave		= &dra7xx_elm_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_elm_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2648,21 +3089,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = {
-	{
-		.pa_start	= 0x50000000,
-		.pa_end		= 0x500003ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l3_main_1 -> gpmc */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_gpmc_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_gpmc_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2948,21 +3379,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_qspi_addrs[] = {
-	{
-		.pa_start	= 0x4b300000,
-		.pa_end		= 0x4b30007f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l3_main_1 -> qspi */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_qspi_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_qspi_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3029,21 +3450,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_spinlock_addrs[] = {
-	{
-		.pa_start	= 0x4a0f6000,
-		.pa_end		= 0x4a0f6fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_cfg -> spinlock */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = {
 	.master		= &dra7xx_l4_cfg_hwmod,
 	.slave		= &dra7xx_spinlock_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_spinlock_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3135,6 +3546,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer11 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_wkup -> timer12 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__timer12 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_timer12_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_per3 -> timer13 */
 static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer13 = {
 	.master		= &dra7xx_l4_per3_hwmod,
@@ -3319,6 +3738,30 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_per2 -> epwmss0 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss0 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_epwmss0_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4_per2 -> epwmss1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss1 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_epwmss1_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4_per2 -> epwmss2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss2 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_epwmss2_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU,
+};
+
 static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__dmm,
 	&dra7xx_l3_main_2__l3_instr,
@@ -3338,8 +3781,22 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_wkup__dcan1,
 	&dra7xx_l4_per2__dcan2,
 	&dra7xx_l4_per2__cpgmac0,
+	&dra7xx_l4_per2__mcasp1,
+	&dra7xx_l3_main_1__mcasp1,
+	&dra7xx_l4_per2__mcasp2,
+	&dra7xx_l3_main_1__mcasp2,
+	&dra7xx_l4_per2__mcasp3,
+	&dra7xx_l3_main_1__mcasp3,
+	&dra7xx_l4_per2__mcasp4,
+	&dra7xx_l4_per2__mcasp5,
+	&dra7xx_l4_per2__mcasp6,
+	&dra7xx_l4_per2__mcasp7,
+	&dra7xx_l4_per2__mcasp8,
 	&dra7xx_gmac__mdio,
 	&dra7xx_l4_cfg__dma_system,
+	&dra7xx_l3_main_1__tpcc,
+	&dra7xx_l3_main_1__tptc0,
+	&dra7xx_l3_main_1__tptc1,
 	&dra7xx_l3_main_1__dss,
 	&dra7xx_l3_main_1__dispc,
 	&dra7xx_l3_main_1__hdmi,
@@ -3426,9 +3883,19 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__vcp2,
 	&dra7xx_l4_per2__vcp2,
 	&dra7xx_l4_wkup__wd_timer2,
+	&dra7xx_l4_per2__epwmss0,
+	&dra7xx_l4_per2__epwmss1,
+	&dra7xx_l4_per2__epwmss2,
 	NULL,
 };
 
+/* GP-only hwmod links */
+static struct omap_hwmod_ocp_if *dra7xx_gp_hwmod_ocp_ifs[] __initdata = {
+	&dra7xx_l4_wkup__timer12,
+	NULL,
+};
+
+/* SoC variant specific hwmod links */
 static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per3__usb_otg_ss4,
 	NULL,
@@ -3446,9 +3913,12 @@ int __init dra7xx_hwmod_init(void)
 	ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
 
 	if (!ret && soc_is_dra74x())
-		return omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
+		ret = omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
 	else if (!ret && soc_is_dra72x())
-		return omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
+		ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
+
+	if (!ret && omap_type() == OMAP2_DEVICE_TYPE_GP)
+		ret = omap_hwmod_register_links(dra7xx_gp_hwmod_ocp_ifs);
 
 	return ret;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index c92413769..b82b77cff 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -32,21 +32,59 @@
  */
 
 /*
- * The alwon .clkctrl_offs field is offset from the CM_ALWON, that's
- * TRM 18.7.17 CM_ALWON device register values minus 0x1400.
+ * Common alwon .clkctrl_offs from dm814x TRM "Table 2-278. CM_ALWON REGISTERS"
+ * also dm816x TRM 18.7.17 CM_ALWON device register values minus 0x1400.
  */
+#define DM81XX_CM_ALWON_MCASP0_CLKCTRL		0x140
+#define DM81XX_CM_ALWON_MCASP1_CLKCTRL		0x144
+#define DM81XX_CM_ALWON_MCASP2_CLKCTRL		0x148
+#define DM81XX_CM_ALWON_MCBSP_CLKCTRL		0x14c
+#define DM81XX_CM_ALWON_UART_0_CLKCTRL		0x150
+#define DM81XX_CM_ALWON_UART_1_CLKCTRL		0x154
+#define DM81XX_CM_ALWON_UART_2_CLKCTRL		0x158
+#define DM81XX_CM_ALWON_GPIO_0_CLKCTRL		0x15c
+#define DM81XX_CM_ALWON_GPIO_1_CLKCTRL		0x160
+#define DM81XX_CM_ALWON_I2C_0_CLKCTRL		0x164
+#define DM81XX_CM_ALWON_I2C_1_CLKCTRL		0x168
+#define DM81XX_CM_ALWON_WDTIMER_CLKCTRL		0x18c
+#define DM81XX_CM_ALWON_SPI_CLKCTRL		0x190
+#define DM81XX_CM_ALWON_MAILBOX_CLKCTRL		0x194
+#define DM81XX_CM_ALWON_SPINBOX_CLKCTRL		0x198
+#define DM81XX_CM_ALWON_MMUDATA_CLKCTRL		0x19c
+#define DM81XX_CM_ALWON_MMUCFG_CLKCTRL		0x1a8
+#define DM81XX_CM_ALWON_CONTROL_CLKCTRL		0x1c4
+#define DM81XX_CM_ALWON_GPMC_CLKCTRL		0x1d0
+#define DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL	0x1d4
+#define DM81XX_CM_ALWON_L3_CLKCTRL		0x1e4
+#define DM81XX_CM_ALWON_L4HS_CLKCTRL		0x1e8
+#define DM81XX_CM_ALWON_L4LS_CLKCTRL		0x1ec
+#define DM81XX_CM_ALWON_RTC_CLKCTRL		0x1f0
+#define DM81XX_CM_ALWON_TPCC_CLKCTRL		0x1f4
+#define DM81XX_CM_ALWON_TPTC0_CLKCTRL		0x1f8
+#define DM81XX_CM_ALWON_TPTC1_CLKCTRL		0x1fc
+#define DM81XX_CM_ALWON_TPTC2_CLKCTRL		0x200
+#define DM81XX_CM_ALWON_TPTC3_CLKCTRL		0x204
+
+/* Registers specific to dm814x */
+#define DM814X_CM_ALWON_MCASP_3_4_5_CLKCTRL	0x16c
+#define DM814X_CM_ALWON_ATL_CLKCTRL		0x170
+#define DM814X_CM_ALWON_MLB_CLKCTRL		0x174
+#define DM814X_CM_ALWON_PATA_CLKCTRL		0x178
+#define DM814X_CM_ALWON_UART_3_CLKCTRL		0x180
+#define DM814X_CM_ALWON_UART_4_CLKCTRL		0x184
+#define DM814X_CM_ALWON_UART_5_CLKCTRL		0x188
+#define DM814X_CM_ALWON_OCM_0_CLKCTRL		0x1b4
+#define DM814X_CM_ALWON_VCP_CLKCTRL		0x1b8
+#define DM814X_CM_ALWON_MPU_CLKCTRL		0x1dc
+#define DM814X_CM_ALWON_DEBUGSS_CLKCTRL		0x1e0
+#define DM814X_CM_ALWON_DCAN_0_1_CLKCTRL	0x218
+#define DM814X_CM_ALWON_MMCHS_0_CLKCTRL		0x21c
+#define DM814X_CM_ALWON_MMCHS_1_CLKCTRL		0x220
+#define DM814X_CM_ALWON_MMCHS_2_CLKCTRL		0x224
+#define DM814X_CM_ALWON_CUST_EFUSE_CLKCTRL	0x228
+
+/* Registers specific to dm816x */
 #define DM816X_DM_ALWON_BASE		0x1400
-#define DM816X_CM_ALWON_MCASP0_CLKCTRL	(0x1540 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_MCASP1_CLKCTRL	(0x1544 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_MCASP2_CLKCTRL	(0x1548 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_MCBSP_CLKCTRL	(0x154c - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_UART_0_CLKCTRL	(0x1550 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_UART_1_CLKCTRL	(0x1554 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_UART_2_CLKCTRL	(0x1558 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_GPIO_0_CLKCTRL	(0x155c - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_GPIO_1_CLKCTRL	(0x1560 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_I2C_0_CLKCTRL	(0x1564 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_I2C_1_CLKCTRL	(0x1568 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_TIMER_1_CLKCTRL	(0x1570 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_TIMER_2_CLKCTRL	(0x1574 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_TIMER_3_CLKCTRL	(0x1578 - DM816X_DM_ALWON_BASE)
@@ -54,29 +92,11 @@
 #define DM816X_CM_ALWON_TIMER_5_CLKCTRL	(0x1580 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_TIMER_6_CLKCTRL	(0x1584 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_TIMER_7_CLKCTRL	(0x1588 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_WDTIMER_CLKCTRL	(0x158c - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_SPI_CLKCTRL	(0x1590 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_MAILBOX_CLKCTRL	(0x1594 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_SPINBOX_CLKCTRL	(0x1598 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_MMUDATA_CLKCTRL	(0x159c - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_MMUCFG_CLKCTRL	(0x15a8 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_SDIO_CLKCTRL	(0x15b0 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_OCMC_0_CLKCTRL	(0x15b4 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_OCMC_1_CLKCTRL	(0x15b8 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_CONTRL_CLKCTRL	(0x15c4 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_GPMC_CLKCTRL	(0x15d0 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_ETHERNET_0_CLKCTRL (0x15d4 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_ETHERNET_1_CLKCTRL (0x15d8 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_MPU_CLKCTRL	(0x15dc - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_L3_CLKCTRL	(0x15e4 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_L4HS_CLKCTRL	(0x15e8 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_L4LS_CLKCTRL	(0x15ec - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_RTC_CLKCTRL	(0x15f0 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_TPCC_CLKCTRL	(0x15f4 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_TPTC0_CLKCTRL	(0x15f8 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_TPTC1_CLKCTRL	(0x15fc - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_TPTC2_CLKCTRL	(0x1600 - DM816X_DM_ALWON_BASE)
-#define DM816X_CM_ALWON_TPTC3_CLKCTRL	(0x1604 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_SR_0_CLKCTRL	(0x1608 - DM816X_DM_ALWON_BASE)
 #define DM816X_CM_ALWON_SR_1_CLKCTRL	(0x160c - DM816X_DM_ALWON_BASE)
 
@@ -84,32 +104,32 @@
  * The default .clkctrl_offs field is offset from CM_DEFAULT, that's
  * TRM 18.7.6 CM_DEFAULT device register values minus 0x500
  */
-#define DM816X_CM_DEFAULT_OFFSET	0x500
-#define DM816X_CM_DEFAULT_USB_CLKCTRL	(0x558 - DM816X_CM_DEFAULT_OFFSET)
+#define DM81XX_CM_DEFAULT_OFFSET	0x500
+#define DM81XX_CM_DEFAULT_USB_CLKCTRL	(0x558 - DM81XX_CM_DEFAULT_OFFSET)
 
 /* L3 Interconnect entries clocked at 125, 250 and 500MHz */
-static struct omap_hwmod dm816x_alwon_l3_slow_hwmod = {
+static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = {
 	.name		= "alwon_l3_slow",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.class		= &l3_hwmod_class,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-static struct omap_hwmod dm816x_default_l3_slow_hwmod = {
+static struct omap_hwmod dm81xx_default_l3_slow_hwmod = {
 	.name		= "default_l3_slow",
 	.clkdm_name	= "default_l3_slow_clkdm",
 	.class		= &l3_hwmod_class,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-static struct omap_hwmod dm816x_alwon_l3_med_hwmod = {
+static struct omap_hwmod dm81xx_alwon_l3_med_hwmod = {
 	.name		= "l3_med",
 	.clkdm_name	= "alwon_l3_med_clkdm",
 	.class		= &l3_hwmod_class,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-static struct omap_hwmod dm816x_alwon_l3_fast_hwmod = {
+static struct omap_hwmod dm81xx_alwon_l3_fast_hwmod = {
 	.name		= "l3_fast",
 	.clkdm_name	= "alwon_l3_fast_clkdm",
 	.class		= &l3_hwmod_class,
@@ -120,10 +140,11 @@ static struct omap_hwmod dm816x_alwon_l3_fast_hwmod = {
  * L4 standard peripherals, see TRM table 1-12 for devices using this.
  * See TRM table 1-73 for devices using the 125MHz SYSCLK6 clock.
  */
-static struct omap_hwmod dm816x_l4_ls_hwmod = {
+static struct omap_hwmod dm81xx_l4_ls_hwmod = {
 	.name		= "l4_ls",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.class		= &l4_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /*
@@ -131,27 +152,55 @@ static struct omap_hwmod dm816x_l4_ls_hwmod = {
  * table 1-13. On dm816x, only EMAC, MDIO and SATA use this. See also TRM
  * table 1-73 for devices using 250MHz SYSCLK5 clock.
  */
-static struct omap_hwmod dm816x_l4_hs_hwmod = {
+static struct omap_hwmod dm81xx_l4_hs_hwmod = {
 	.name		= "l4_hs",
 	.clkdm_name	= "alwon_l3_med_clkdm",
 	.class		= &l4_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* L3 slow -> L4 ls peripheral interface running at 125MHz */
-static struct omap_hwmod_ocp_if dm816x_alwon_l3_slow__l4_ls = {
-	.master	= &dm816x_alwon_l3_slow_hwmod,
-	.slave	= &dm816x_l4_ls_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__l4_ls = {
+	.master	= &dm81xx_alwon_l3_slow_hwmod,
+	.slave	= &dm81xx_l4_ls_hwmod,
 	.user	= OCP_USER_MPU,
 };
 
 /* L3 med -> L4 fast peripheral interface running at 250MHz */
-static struct omap_hwmod_ocp_if dm816x_alwon_l3_slow__l4_hs = {
-	.master	= &dm816x_alwon_l3_med_hwmod,
-	.slave	= &dm816x_l4_hs_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__l4_hs = {
+	.master	= &dm81xx_alwon_l3_med_hwmod,
+	.slave	= &dm81xx_l4_hs_hwmod,
 	.user	= OCP_USER_MPU,
 };
 
 /* MPU */
+static struct omap_hwmod dm814x_mpu_hwmod = {
+	.name		= "mpu",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.class		= &mpu_hwmod_class,
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "mpu_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MPU_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_ocp_if dm814x_mpu__alwon_l3_slow = {
+	.master		= &dm814x_mpu_hwmod,
+	.slave		= &dm81xx_alwon_l3_slow_hwmod,
+	.user		= OCP_USER_MPU,
+};
+
+/* L3 med peripheral interface running at 200MHz */
+static struct omap_hwmod_ocp_if dm814x_mpu__alwon_l3_med = {
+	.master	= &dm814x_mpu_hwmod,
+	.slave	= &dm81xx_alwon_l3_med_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
 static struct omap_hwmod dm816x_mpu_hwmod = {
 	.name		= "mpu",
 	.clkdm_name	= "alwon_mpu_clkdm",
@@ -168,17 +217,53 @@ static struct omap_hwmod dm816x_mpu_hwmod = {
 
 static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_slow = {
 	.master		= &dm816x_mpu_hwmod,
-	.slave		= &dm816x_alwon_l3_slow_hwmod,
+	.slave		= &dm81xx_alwon_l3_slow_hwmod,
 	.user		= OCP_USER_MPU,
 };
 
 /* L3 med peripheral interface running at 250MHz */
 static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_med = {
 	.master	= &dm816x_mpu_hwmod,
-	.slave	= &dm816x_alwon_l3_med_hwmod,
+	.slave	= &dm81xx_alwon_l3_med_hwmod,
 	.user	= OCP_USER_MPU,
 };
 
+/* RTC */
+static struct omap_hwmod_class_sysconfig ti81xx_rtc_sysc = {
+	.rev_offs	= 0x74,
+	.sysc_offs	= 0x78,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO |
+			  SIDLE_SMART | SIDLE_SMART_WKUP,
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class ti81xx_rtc_hwmod_class = {
+	.name		= "rtc",
+	.sysc		= &ti81xx_rtc_sysc,
+};
+
+static struct omap_hwmod ti81xx_rtc_hwmod = {
+	.name		= "rtc",
+	.class		= &ti81xx_rtc_hwmod_class,
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.flags		= HWMOD_NO_IDLEST,
+	.main_clk	= "sysclk18_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = DM81XX_CM_ALWON_RTC_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_ocp_if ti81xx_l4_ls__rtc = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &ti81xx_rtc_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+};
+
 /* UART common */
 static struct omap_hwmod_class_sysconfig uart_sysc = {
 	.rev_offs	= 0x50,
@@ -197,13 +282,13 @@ static struct omap_hwmod_class uart_class = {
 	.sysc = &uart_sysc,
 };
 
-static struct omap_hwmod dm816x_uart1_hwmod = {
+static struct omap_hwmod dm81xx_uart1_hwmod = {
 	.name		= "uart1",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk10_ck",
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_UART_0_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_UART_0_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
@@ -211,20 +296,20 @@ static struct omap_hwmod dm816x_uart1_hwmod = {
 	.flags		= DEBUG_TI81XXUART1_FLAGS,
 };
 
-static struct omap_hwmod_ocp_if dm816x_l4_ls__uart1 = {
-	.master		= &dm816x_l4_ls_hwmod,
-	.slave		= &dm816x_uart1_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__uart1 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm81xx_uart1_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod dm816x_uart2_hwmod = {
+static struct omap_hwmod dm81xx_uart2_hwmod = {
 	.name		= "uart2",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk10_ck",
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_UART_1_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_UART_1_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
@@ -232,20 +317,20 @@ static struct omap_hwmod dm816x_uart2_hwmod = {
 	.flags		= DEBUG_TI81XXUART2_FLAGS,
 };
 
-static struct omap_hwmod_ocp_if dm816x_l4_ls__uart2 = {
-	.master		= &dm816x_l4_ls_hwmod,
-	.slave		= &dm816x_uart2_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__uart2 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm81xx_uart2_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod dm816x_uart3_hwmod = {
+static struct omap_hwmod dm81xx_uart3_hwmod = {
 	.name		= "uart3",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk10_ck",
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_UART_2_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_UART_2_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
@@ -253,9 +338,9 @@ static struct omap_hwmod dm816x_uart3_hwmod = {
 	.flags		= DEBUG_TI81XXUART3_FLAGS,
 };
 
-static struct omap_hwmod_ocp_if dm816x_l4_ls__uart3 = {
-	.master		= &dm816x_l4_ls_hwmod,
-	.slave		= &dm816x_uart3_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__uart3 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm81xx_uart3_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
@@ -276,23 +361,23 @@ static struct omap_hwmod_class wd_timer_class = {
 	.reset		= &omap2_wd_timer_reset,
 };
 
-static struct omap_hwmod dm816x_wd_timer_hwmod = {
+static struct omap_hwmod dm81xx_wd_timer_hwmod = {
 	.name		= "wd_timer",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk18_ck",
 	.flags		= HWMOD_NO_IDLEST,
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_WDTIMER_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_WDTIMER_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
 	.class		= &wd_timer_class,
 };
 
-static struct omap_hwmod_ocp_if dm816x_l4_ls__wd_timer1 = {
-	.master		= &dm816x_l4_ls_hwmod,
-	.slave		= &dm816x_wd_timer_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__wd_timer1 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm81xx_wd_timer_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
@@ -320,27 +405,27 @@ static struct omap_hwmod dm81xx_i2c1_hwmod = {
 	.main_clk	= "sysclk10_ck",
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_I2C_0_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_I2C_0_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
 	.class		= &i2c_class,
 };
 
-static struct omap_hwmod_ocp_if dm816x_l4_ls__i2c1 = {
-	.master		= &dm816x_l4_ls_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__i2c1 = {
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm81xx_i2c1_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod dm816x_i2c2_hwmod = {
+static struct omap_hwmod dm81xx_i2c2_hwmod = {
 	.name		= "i2c2",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk10_ck",
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_I2C_1_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_I2C_1_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
@@ -358,9 +443,9 @@ static struct omap_hwmod_class_sysconfig dm81xx_elm_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_ocp_if dm816x_l4_ls__i2c2 = {
-	.master		= &dm816x_l4_ls_hwmod,
-	.slave		= &dm816x_i2c2_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__i2c2 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm81xx_i2c2_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
@@ -378,8 +463,9 @@ static struct omap_hwmod dm81xx_elm_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__elm = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm81xx_elm_hwmod,
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -417,7 +503,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = {
 	.main_clk	= "sysclk6_ck",
 	.prcm = {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_GPIO_0_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_GPIO_0_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
@@ -427,8 +513,9 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm81xx_gpio1_hwmod,
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -443,7 +530,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = {
 	.main_clk	= "sysclk6_ck",
 	.prcm = {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_GPIO_1_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_GPIO_1_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
@@ -453,8 +540,9 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm81xx_gpio2_hwmod,
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -482,21 +570,23 @@ static struct omap_hwmod dm81xx_gpmc_hwmod = {
 	.flags		= DEBUG_OMAP_GPMC_HWMOD_FLAGS,
 	.prcm = {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_GPMC_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_GPMC_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
 };
 
-struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
-	.master		= &dm816x_alwon_l3_slow_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
+	.master		= &dm81xx_alwon_l3_slow_hwmod,
 	.slave		= &dm81xx_gpmc_hwmod,
 	.user		= OCP_USER_MPU,
 };
 
+/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */
 static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x10,
+	.srst_udelay	= 2,
 	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
 				SYSC_HAS_SOFTRESET,
 	.idlemodes	= SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART,
@@ -508,22 +598,42 @@ static struct omap_hwmod_class dm81xx_usbotg_class = {
 	.sysc = &dm81xx_usbhsotg_sysc,
 };
 
-static struct omap_hwmod dm81xx_usbss_hwmod = {
+static struct omap_hwmod dm814x_usbss_hwmod = {
+	.name		= "usb_otg_hs",
+	.clkdm_name	= "default_l3_slow_clkdm",
+	.main_clk	= "pll260dcoclkldo",	/* 481c5260.adpll.dcoclkldo */
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.class		= &dm81xx_usbotg_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_default_l3_slow__usbss = {
+	.master		= &dm81xx_default_l3_slow_hwmod,
+	.slave		= &dm814x_usbss_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod dm816x_usbss_hwmod = {
 	.name		= "usb_otg_hs",
 	.clkdm_name	= "default_l3_slow_clkdm",
 	.main_clk	= "sysclk6_ck",
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_DEFAULT_USB_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
 	.class		= &dm81xx_usbotg_class,
 };
 
-static struct omap_hwmod_ocp_if dm81xx_default_l3_slow__usbss = {
-	.master		= &dm816x_default_l3_slow_hwmod,
-	.slave		= &dm81xx_usbss_hwmod,
+static struct omap_hwmod_ocp_if dm816x_default_l3_slow__usbss = {
+	.master		= &dm81xx_default_l3_slow_hwmod,
+	.slave		= &dm816x_usbss_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
@@ -547,6 +657,22 @@ static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
 	.timer_capability	= OMAP_TIMER_ALWON,
 };
 
+static struct omap_hwmod dm814x_timer1_hwmod = {
+	.name		= "timer1",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.main_clk	= "timer1_fck",
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &dm816x_timer_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm814x_timer1_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+};
+
 static struct omap_hwmod dm816x_timer1_hwmod = {
 	.name		= "timer1",
 	.clkdm_name	= "alwon_l3s_clkdm",
@@ -562,12 +688,28 @@ static struct omap_hwmod dm816x_timer1_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm816x_timer1_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
+static struct omap_hwmod dm814x_timer2_hwmod = {
+	.name		= "timer2",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.main_clk	= "timer2_fck",
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &dm816x_timer_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm814x_timer2_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+};
+
 static struct omap_hwmod dm816x_timer2_hwmod = {
 	.name		= "timer2",
 	.clkdm_name	= "alwon_l3s_clkdm",
@@ -583,7 +725,7 @@ static struct omap_hwmod dm816x_timer2_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__timer2 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm816x_timer2_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
@@ -604,7 +746,7 @@ static struct omap_hwmod dm816x_timer3_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__timer3 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm816x_timer3_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
@@ -625,7 +767,7 @@ static struct omap_hwmod dm816x_timer4_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__timer4 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm816x_timer4_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
@@ -646,7 +788,7 @@ static struct omap_hwmod dm816x_timer5_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__timer5 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm816x_timer5_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
@@ -667,7 +809,7 @@ static struct omap_hwmod dm816x_timer6_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__timer6 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm816x_timer6_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
@@ -688,12 +830,68 @@ static struct omap_hwmod dm816x_timer7_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__timer7 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm816x_timer7_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
+/* CPSW on dm814x */
+static struct omap_hwmod_class_sysconfig dm814x_cpgmac_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x8,
+	.syss_offs	= 0x4,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+			  SYSS_HAS_RESET_STATUS,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
+			  MSTANDBY_NO,
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dm814x_cpgmac0_hwmod_class = {
+	.name		= "cpgmac0",
+	.sysc		= &dm814x_cpgmac_sysc,
+};
+
+static struct omap_hwmod dm814x_cpgmac0_hwmod = {
+	.name		= "cpgmac0",
+	.class		= &dm814x_cpgmac0_hwmod_class,
+	.clkdm_name	= "alwon_ethernet_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "cpsw_125mhz_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class dm814x_mdio_hwmod_class = {
+	.name		= "davinci_mdio",
+};
+
+static struct omap_hwmod dm814x_mdio_hwmod = {
+	.name		= "davinci_mdio",
+	.class		= &dm814x_mdio_hwmod_class,
+	.clkdm_name	= "alwon_ethernet_clkdm",
+	.main_clk	= "cpsw_125mhz_gclk",
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_hs__cpgmac0 = {
+	.master		= &dm81xx_l4_hs_hwmod,
+	.slave		= &dm814x_cpgmac0_hwmod,
+	.clk		= "cpsw_125mhz_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if dm814x_cpgmac0__mdio = {
+	.master		= &dm814x_cpgmac0_hwmod,
+	.slave		= &dm814x_mdio_hwmod,
+	.user		= OCP_USER_MPU,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
 /* EMAC Ethernet */
 static struct omap_hwmod_class_sysconfig dm816x_emac_sysc = {
 	.rev_offs	= 0x0,
@@ -715,23 +913,24 @@ static struct omap_hwmod dm816x_emac0_hwmod = {
 	.name		= "emac0",
 	.clkdm_name	= "alwon_ethernet_clkdm",
 	.class		= &dm816x_emac_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
 };
 
-static struct omap_hwmod_ocp_if dm816x_l4_hs__emac0 = {
-	.master		= &dm816x_l4_hs_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_l4_hs__emac0 = {
+	.master		= &dm81xx_l4_hs_hwmod,
 	.slave		= &dm816x_emac0_hwmod,
 	.clk		= "sysclk5_ck",
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_class dm816x_mdio_hwmod_class = {
+static struct omap_hwmod_class dm81xx_mdio_hwmod_class = {
 	.name		= "davinci_mdio",
 	.sysc		= &dm816x_emac_sysc,
 };
 
-struct omap_hwmod dm816x_emac0_mdio_hwmod = {
+static struct omap_hwmod dm81xx_emac0_mdio_hwmod = {
 	.name		= "davinci_mdio",
-	.class		= &dm816x_mdio_hwmod_class,
+	.class		= &dm81xx_mdio_hwmod_class,
 	.clkdm_name	= "alwon_ethernet_clkdm",
 	.main_clk	= "sysclk24_ck",
 	.flags		= HWMOD_NO_IDLEST,
@@ -741,15 +940,15 @@ struct omap_hwmod dm816x_emac0_mdio_hwmod = {
 	 */
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_ETHERNET_0_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
 };
 
-struct omap_hwmod_ocp_if dm816x_emac0__mdio = {
-	.master		= &dm816x_l4_hs_hwmod,
-	.slave		= &dm816x_emac0_mdio_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_emac0__mdio = {
+	.master		= &dm81xx_l4_hs_hwmod,
+	.slave		= &dm81xx_emac0_mdio_hwmod,
 	.user		= OCP_USER_MPU,
 };
 
@@ -768,13 +967,13 @@ static struct omap_hwmod dm816x_emac1_hwmod = {
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = {
-	.master		= &dm816x_l4_hs_hwmod,
+	.master		= &dm81xx_l4_hs_hwmod,
 	.slave		= &dm816x_emac1_hwmod,
 	.clk		= "sysclk5_ck",
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = {
+static struct omap_hwmod_class_sysconfig dm81xx_mmc_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x110,
 	.syss_offs	= 0x114,
@@ -785,24 +984,94 @@ static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_class dm816x_mmc_class = {
+static struct omap_hwmod_class dm81xx_mmc_class = {
 	.name = "mmc",
-	.sysc = &dm816x_mmc_sysc,
+	.sysc = &dm81xx_mmc_sysc,
 };
 
-static struct omap_hwmod_opt_clk dm816x_mmc1_opt_clks[] = {
+static struct omap_hwmod_opt_clk dm81xx_mmc_opt_clks[] = {
 	{ .role = "dbck", .clk = "sysclk18_ck", },
 };
 
-static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
-	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+static struct omap_hsmmc_dev_attr mmc_dev_attr = {
+};
+
+static struct omap_hwmod dm814x_mmc1_hwmod = {
+	.name		= "mmc1",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
+	.main_clk	= "sysclk8_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MMCHS_0_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc1 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm814x_mmc1_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod dm814x_mmc2_hwmod = {
+	.name		= "mmc2",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
+	.main_clk	= "sysclk8_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MMCHS_1_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc2 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm814x_mmc2_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod dm814x_mmc3_hwmod = {
+	.name		= "mmc3",
+	.clkdm_name	= "alwon_l3_med_clkdm",
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
+	.main_clk	= "sysclk8_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MMCHS_2_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_alwon_l3_med__mmc3 = {
+	.master		= &dm81xx_alwon_l3_med_hwmod,
+	.slave		= &dm814x_mmc3_hwmod,
+	.clk		= "sysclk4_ck",
+	.user		= OCP_USER_MPU,
 };
 
 static struct omap_hwmod dm816x_mmc1_hwmod = {
 	.name		= "mmc1",
 	.clkdm_name	= "alwon_l3s_clkdm",
-	.opt_clks	= dm816x_mmc1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dm816x_mmc1_opt_clks),
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
 	.main_clk	= "sysclk10_ck",
 	.prcm		= {
 		.omap4 = {
@@ -810,12 +1079,12 @@ static struct omap_hwmod dm816x_mmc1_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mmc1_dev_attr,
-	.class		= &dm816x_mmc_class,
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__mmc1 = {
-	.master		= &dm816x_l4_ls_hwmod,
+	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm816x_mmc1_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
@@ -843,13 +1112,13 @@ static struct omap2_mcspi_dev_attr dm816x_mcspi1_dev_attr = {
 	.num_chipselect = 4,
 };
 
-static struct omap_hwmod dm816x_mcspi1_hwmod = {
+static struct omap_hwmod dm81xx_mcspi1_hwmod = {
 	.name		= "mcspi1",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk10_ck",
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_SPI_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_SPI_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
@@ -857,14 +1126,14 @@ static struct omap_hwmod dm816x_mcspi1_hwmod = {
 	.dev_attr	= &dm816x_mcspi1_dev_attr,
 };
 
-static struct omap_hwmod_ocp_if dm816x_l4_ls__mcspi1 = {
-	.master		= &dm816x_l4_ls_hwmod,
-	.slave		= &dm816x_mcspi1_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi1 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm81xx_mcspi1_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_class_sysconfig dm816x_mailbox_sysc = {
+static struct omap_hwmod_class_sysconfig dm81xx_mailbox_sysc = {
 	.rev_offs	= 0x000,
 	.sysc_offs	= 0x010,
 	.syss_offs	= 0x014,
@@ -874,55 +1143,91 @@ static struct omap_hwmod_class_sysconfig dm816x_mailbox_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_class dm816x_mailbox_hwmod_class = {
+static struct omap_hwmod_class dm81xx_mailbox_hwmod_class = {
 	.name = "mailbox",
-	.sysc = &dm816x_mailbox_sysc,
+	.sysc = &dm81xx_mailbox_sysc,
 };
 
-static struct omap_hwmod dm816x_mailbox_hwmod = {
+static struct omap_hwmod dm81xx_mailbox_hwmod = {
 	.name		= "mailbox",
 	.clkdm_name	= "alwon_l3s_clkdm",
-	.class		= &dm816x_mailbox_hwmod_class,
+	.class		= &dm81xx_mailbox_hwmod_class,
+	.main_clk	= "sysclk6_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM81XX_CM_ALWON_MAILBOX_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm81xx_mailbox_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_class_sysconfig dm81xx_spinbox_sysc = {
+	.rev_offs	= 0x000,
+	.sysc_offs	= 0x010,
+	.syss_offs	= 0x014,
+	.sysc_flags	= SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+				SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO | SIDLE_SMART,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dm81xx_spinbox_hwmod_class = {
+	.name = "spinbox",
+	.sysc = &dm81xx_spinbox_sysc,
+};
+
+static struct omap_hwmod dm81xx_spinbox_hwmod = {
+	.name		= "spinbox",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.class		= &dm81xx_spinbox_hwmod_class,
 	.main_clk	= "sysclk6_ck",
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_ALWON_MAILBOX_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_ALWON_SPINBOX_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
 };
 
-static struct omap_hwmod_ocp_if dm816x_l4_ls__mailbox = {
-	.master		= &dm816x_l4_ls_hwmod,
-	.slave		= &dm816x_mailbox_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm81xx_spinbox_hwmod,
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_class dm816x_tpcc_hwmod_class = {
+static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = {
 	.name		= "tpcc",
 };
 
-struct omap_hwmod dm816x_tpcc_hwmod = {
+static struct omap_hwmod dm81xx_tpcc_hwmod = {
 	.name		= "tpcc",
-	.class		= &dm816x_tpcc_hwmod_class,
+	.class		= &dm81xx_tpcc_hwmod_class,
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk4_ck",
 	.prcm		= {
 		.omap4	= {
-			.clkctrl_offs	= DM816X_CM_ALWON_TPCC_CLKCTRL,
+			.clkctrl_offs	= DM81XX_CM_ALWON_TPCC_CLKCTRL,
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
 };
 
-struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tpcc = {
-	.master		= &dm816x_alwon_l3_fast_hwmod,
-	.slave		= &dm816x_tpcc_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tpcc = {
+	.master		= &dm81xx_alwon_l3_fast_hwmod,
+	.slave		= &dm81xx_tpcc_hwmod,
 	.clk		= "sysclk4_ck",
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space dm816x_tptc0_addr_space[] = {
+static struct omap_hwmod_addr_space dm81xx_tptc0_addr_space[] = {
 	{
 		.pa_start	= 0x49800000,
 		.pa_end		= 0x49800000 + SZ_8K - 1,
@@ -931,40 +1236,40 @@ static struct omap_hwmod_addr_space dm816x_tptc0_addr_space[] = {
 	{ },
 };
 
-static struct omap_hwmod_class dm816x_tptc0_hwmod_class = {
+static struct omap_hwmod_class dm81xx_tptc0_hwmod_class = {
 	.name		= "tptc0",
 };
 
-struct omap_hwmod dm816x_tptc0_hwmod = {
+static struct omap_hwmod dm81xx_tptc0_hwmod = {
 	.name		= "tptc0",
-	.class		= &dm816x_tptc0_hwmod_class,
+	.class		= &dm81xx_tptc0_hwmod_class,
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk4_ck",
 	.prcm		= {
 		.omap4	= {
-			.clkctrl_offs	= DM816X_CM_ALWON_TPTC0_CLKCTRL,
+			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC0_CLKCTRL,
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
 };
 
-struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc0 = {
-	.master		= &dm816x_alwon_l3_fast_hwmod,
-	.slave		= &dm816x_tptc0_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc0 = {
+	.master		= &dm81xx_alwon_l3_fast_hwmod,
+	.slave		= &dm81xx_tptc0_hwmod,
 	.clk		= "sysclk4_ck",
-	.addr		= dm816x_tptc0_addr_space,
+	.addr		= dm81xx_tptc0_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if dm816x_tptc0__alwon_l3_fast = {
-	.master		= &dm816x_tptc0_hwmod,
-	.slave		= &dm816x_alwon_l3_fast_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_tptc0__alwon_l3_fast = {
+	.master		= &dm81xx_tptc0_hwmod,
+	.slave		= &dm81xx_alwon_l3_fast_hwmod,
 	.clk		= "sysclk4_ck",
-	.addr		= dm816x_tptc0_addr_space,
+	.addr		= dm81xx_tptc0_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space dm816x_tptc1_addr_space[] = {
+static struct omap_hwmod_addr_space dm81xx_tptc1_addr_space[] = {
 	{
 		.pa_start	= 0x49900000,
 		.pa_end		= 0x49900000 + SZ_8K - 1,
@@ -973,40 +1278,40 @@ static struct omap_hwmod_addr_space dm816x_tptc1_addr_space[] = {
 	{ },
 };
 
-static struct omap_hwmod_class dm816x_tptc1_hwmod_class = {
+static struct omap_hwmod_class dm81xx_tptc1_hwmod_class = {
 	.name		= "tptc1",
 };
 
-struct omap_hwmod dm816x_tptc1_hwmod = {
+static struct omap_hwmod dm81xx_tptc1_hwmod = {
 	.name		= "tptc1",
-	.class		= &dm816x_tptc1_hwmod_class,
+	.class		= &dm81xx_tptc1_hwmod_class,
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk4_ck",
 	.prcm		= {
 		.omap4	= {
-			.clkctrl_offs	= DM816X_CM_ALWON_TPTC1_CLKCTRL,
+			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC1_CLKCTRL,
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
 };
 
-struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc1 = {
-	.master		= &dm816x_alwon_l3_fast_hwmod,
-	.slave		= &dm816x_tptc1_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc1 = {
+	.master		= &dm81xx_alwon_l3_fast_hwmod,
+	.slave		= &dm81xx_tptc1_hwmod,
 	.clk		= "sysclk4_ck",
-	.addr		= dm816x_tptc1_addr_space,
+	.addr		= dm81xx_tptc1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if dm816x_tptc1__alwon_l3_fast = {
-	.master		= &dm816x_tptc1_hwmod,
-	.slave		= &dm816x_alwon_l3_fast_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_tptc1__alwon_l3_fast = {
+	.master		= &dm81xx_tptc1_hwmod,
+	.slave		= &dm81xx_alwon_l3_fast_hwmod,
 	.clk		= "sysclk4_ck",
-	.addr		= dm816x_tptc1_addr_space,
+	.addr		= dm81xx_tptc1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space dm816x_tptc2_addr_space[] = {
+static struct omap_hwmod_addr_space dm81xx_tptc2_addr_space[] = {
 	{
 		.pa_start	= 0x49a00000,
 		.pa_end		= 0x49a00000 + SZ_8K - 1,
@@ -1015,40 +1320,40 @@ static struct omap_hwmod_addr_space dm816x_tptc2_addr_space[] = {
 	{ },
 };
 
-static struct omap_hwmod_class dm816x_tptc2_hwmod_class = {
+static struct omap_hwmod_class dm81xx_tptc2_hwmod_class = {
 	.name		= "tptc2",
 };
 
-struct omap_hwmod dm816x_tptc2_hwmod = {
+static struct omap_hwmod dm81xx_tptc2_hwmod = {
 	.name		= "tptc2",
-	.class		= &dm816x_tptc2_hwmod_class,
+	.class		= &dm81xx_tptc2_hwmod_class,
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk4_ck",
 	.prcm		= {
 		.omap4	= {
-			.clkctrl_offs	= DM816X_CM_ALWON_TPTC2_CLKCTRL,
+			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC2_CLKCTRL,
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
 };
 
-struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc2 = {
-	.master		= &dm816x_alwon_l3_fast_hwmod,
-	.slave		= &dm816x_tptc2_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc2 = {
+	.master		= &dm81xx_alwon_l3_fast_hwmod,
+	.slave		= &dm81xx_tptc2_hwmod,
 	.clk		= "sysclk4_ck",
-	.addr		= dm816x_tptc2_addr_space,
+	.addr		= dm81xx_tptc2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if dm816x_tptc2__alwon_l3_fast = {
-	.master		= &dm816x_tptc2_hwmod,
-	.slave		= &dm816x_alwon_l3_fast_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_tptc2__alwon_l3_fast = {
+	.master		= &dm81xx_tptc2_hwmod,
+	.slave		= &dm81xx_alwon_l3_fast_hwmod,
 	.clk		= "sysclk4_ck",
-	.addr		= dm816x_tptc2_addr_space,
+	.addr		= dm81xx_tptc2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space dm816x_tptc3_addr_space[] = {
+static struct omap_hwmod_addr_space dm81xx_tptc3_addr_space[] = {
 	{
 		.pa_start	= 0x49b00000,
 		.pa_end		= 0x49b00000 + SZ_8K - 1,
@@ -1057,53 +1362,104 @@ static struct omap_hwmod_addr_space dm816x_tptc3_addr_space[] = {
 	{ },
 };
 
-static struct omap_hwmod_class dm816x_tptc3_hwmod_class = {
+static struct omap_hwmod_class dm81xx_tptc3_hwmod_class = {
 	.name		= "tptc3",
 };
 
-struct omap_hwmod dm816x_tptc3_hwmod = {
+static struct omap_hwmod dm81xx_tptc3_hwmod = {
 	.name		= "tptc3",
-	.class		= &dm816x_tptc3_hwmod_class,
+	.class		= &dm81xx_tptc3_hwmod_class,
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "sysclk4_ck",
 	.prcm		= {
 		.omap4	= {
-			.clkctrl_offs	= DM816X_CM_ALWON_TPTC3_CLKCTRL,
+			.clkctrl_offs	= DM81XX_CM_ALWON_TPTC3_CLKCTRL,
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
 };
 
-struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc3 = {
-	.master		= &dm816x_alwon_l3_fast_hwmod,
-	.slave		= &dm816x_tptc3_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc3 = {
+	.master		= &dm81xx_alwon_l3_fast_hwmod,
+	.slave		= &dm81xx_tptc3_hwmod,
 	.clk		= "sysclk4_ck",
-	.addr		= dm816x_tptc3_addr_space,
+	.addr		= dm81xx_tptc3_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if dm816x_tptc3__alwon_l3_fast = {
-	.master		= &dm816x_tptc3_hwmod,
-	.slave		= &dm816x_alwon_l3_fast_hwmod,
+static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = {
+	.master		= &dm81xx_tptc3_hwmod,
+	.slave		= &dm81xx_alwon_l3_fast_hwmod,
 	.clk		= "sysclk4_ck",
-	.addr		= dm816x_tptc3_addr_space,
+	.addr		= dm81xx_tptc3_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
+/*
+ * REVISIT: Test and enable the following once clocks work:
+ * dm81xx_l4_ls__mailbox
+ *
+ * Also note that some devices share a single clkctrl_offs..
+ * For example, i2c1 and 3 share one, and i2c2 and 4 share one.
+ */
+static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
+	&dm814x_mpu__alwon_l3_slow,
+	&dm814x_mpu__alwon_l3_med,
+	&dm81xx_alwon_l3_slow__l4_ls,
+	&dm81xx_alwon_l3_slow__l4_hs,
+	&dm81xx_l4_ls__uart1,
+	&dm81xx_l4_ls__uart2,
+	&dm81xx_l4_ls__uart3,
+	&dm81xx_l4_ls__wd_timer1,
+	&dm81xx_l4_ls__i2c1,
+	&dm81xx_l4_ls__i2c2,
+	&dm81xx_l4_ls__gpio1,
+	&dm81xx_l4_ls__gpio2,
+	&dm81xx_l4_ls__elm,
+	&dm81xx_l4_ls__mcspi1,
+	&dm814x_l4_ls__mmc1,
+	&dm814x_l4_ls__mmc2,
+	&ti81xx_l4_ls__rtc,
+	&dm81xx_alwon_l3_fast__tpcc,
+	&dm81xx_alwon_l3_fast__tptc0,
+	&dm81xx_alwon_l3_fast__tptc1,
+	&dm81xx_alwon_l3_fast__tptc2,
+	&dm81xx_alwon_l3_fast__tptc3,
+	&dm81xx_tptc0__alwon_l3_fast,
+	&dm81xx_tptc1__alwon_l3_fast,
+	&dm81xx_tptc2__alwon_l3_fast,
+	&dm81xx_tptc3__alwon_l3_fast,
+	&dm814x_l4_ls__timer1,
+	&dm814x_l4_ls__timer2,
+	&dm814x_l4_hs__cpgmac0,
+	&dm814x_cpgmac0__mdio,
+	&dm81xx_alwon_l3_slow__gpmc,
+	&dm814x_default_l3_slow__usbss,
+	&dm814x_alwon_l3_med__mmc3,
+	NULL,
+};
+
+int __init dm814x_hwmod_init(void)
+{
+	omap_hwmod_init();
+	return omap_hwmod_register_links(dm814x_hwmod_ocp_ifs);
+}
+
 static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
 	&dm816x_mpu__alwon_l3_slow,
 	&dm816x_mpu__alwon_l3_med,
-	&dm816x_alwon_l3_slow__l4_ls,
-	&dm816x_alwon_l3_slow__l4_hs,
-	&dm816x_l4_ls__uart1,
-	&dm816x_l4_ls__uart2,
-	&dm816x_l4_ls__uart3,
-	&dm816x_l4_ls__wd_timer1,
-	&dm816x_l4_ls__i2c1,
-	&dm816x_l4_ls__i2c2,
+	&dm81xx_alwon_l3_slow__l4_ls,
+	&dm81xx_alwon_l3_slow__l4_hs,
+	&dm81xx_l4_ls__uart1,
+	&dm81xx_l4_ls__uart2,
+	&dm81xx_l4_ls__uart3,
+	&dm81xx_l4_ls__wd_timer1,
+	&dm81xx_l4_ls__i2c1,
+	&dm81xx_l4_ls__i2c2,
 	&dm81xx_l4_ls__gpio1,
 	&dm81xx_l4_ls__gpio2,
 	&dm81xx_l4_ls__elm,
+	&ti81xx_l4_ls__rtc,
 	&dm816x_l4_ls__mmc1,
 	&dm816x_l4_ls__timer1,
 	&dm816x_l4_ls__timer2,
@@ -1112,26 +1468,27 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
 	&dm816x_l4_ls__timer5,
 	&dm816x_l4_ls__timer6,
 	&dm816x_l4_ls__timer7,
-	&dm816x_l4_ls__mcspi1,
-	&dm816x_l4_ls__mailbox,
-	&dm816x_l4_hs__emac0,
-	&dm816x_emac0__mdio,
+	&dm81xx_l4_ls__mcspi1,
+	&dm81xx_l4_ls__mailbox,
+	&dm81xx_l4_ls__spinbox,
+	&dm81xx_l4_hs__emac0,
+	&dm81xx_emac0__mdio,
 	&dm816x_l4_hs__emac1,
-	&dm816x_alwon_l3_fast__tpcc,
-	&dm816x_alwon_l3_fast__tptc0,
-	&dm816x_alwon_l3_fast__tptc1,
-	&dm816x_alwon_l3_fast__tptc2,
-	&dm816x_alwon_l3_fast__tptc3,
-	&dm816x_tptc0__alwon_l3_fast,
-	&dm816x_tptc1__alwon_l3_fast,
-	&dm816x_tptc2__alwon_l3_fast,
-	&dm816x_tptc3__alwon_l3_fast,
+	&dm81xx_alwon_l3_fast__tpcc,
+	&dm81xx_alwon_l3_fast__tptc0,
+	&dm81xx_alwon_l3_fast__tptc1,
+	&dm81xx_alwon_l3_fast__tptc2,
+	&dm81xx_alwon_l3_fast__tptc3,
+	&dm81xx_tptc0__alwon_l3_fast,
+	&dm81xx_tptc1__alwon_l3_fast,
+	&dm81xx_tptc2__alwon_l3_fast,
+	&dm81xx_tptc3__alwon_l3_fast,
 	&dm81xx_alwon_l3_slow__gpmc,
-	&dm81xx_default_l3_slow__usbss,
+	&dm816x_default_l3_slow__usbss,
 	NULL,
 };
 
-int __init ti81xx_hwmod_init(void)
+int __init dm816x_hwmod_init(void)
 {
 	omap_hwmod_init();
 	return omap_hwmod_register_links(dm816x_hwmod_ocp_ifs);
diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c
index 65e186c9d..b68f9c0af 100644
--- a/arch/arm/mach-omap2/omap_hwmod_reset.c
+++ b/arch/arm/mach-omap2/omap_hwmod_reset.c
@@ -29,6 +29,16 @@
 #include <sound/aess.h>
 
 #include "omap_hwmod.h"
+#include "common.h"
+
+#define OMAP_RTC_STATUS_REG	0x44
+#define OMAP_RTC_KICK0_REG	0x6c
+#define OMAP_RTC_KICK1_REG	0x70
+
+#define OMAP_RTC_KICK0_VALUE	0x83E70B13
+#define OMAP_RTC_KICK1_VALUE	0x95A4F1E0
+#define OMAP_RTC_STATUS_BUSY	BIT(0)
+#define OMAP_RTC_MAX_READY_TIME	50
 
 /**
  * omap_hwmod_aess_preprogram - enable AESS internal autogating
@@ -51,3 +61,58 @@ int omap_hwmod_aess_preprogram(struct omap_hwmod *oh)
 
 	return 0;
 }
+
+/**
+ * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
+ * @oh: struct omap_hwmod *
+ *
+ * For updating certain RTC registers, the MPU must wait
+ * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
+ * Once the BUSY status is zero, there is a 15 microseconds access
+ * period in which the MPU can program.
+ */
+static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
+{
+	int i;
+
+	/* BUSY may stay active for 1/32768 second (~30 usec) */
+	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
+			  & OMAP_RTC_STATUS_BUSY, OMAP_RTC_MAX_READY_TIME, i);
+	/* now we have ~15 microseconds to read/write various registers */
+}
+
+/**
+ * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
+ * @oh: struct omap_hwmod *
+ *
+ * RTC IP have kicker feature. This prevents spurious writes to its registers.
+ * In order to write into any of the RTC registers, KICK values has te be
+ * written in respective KICK registers. This is needed for hwmod to write into
+ * sysconfig register.
+ */
+void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
+{
+	local_irq_disable();
+	omap_rtc_wait_not_busy(oh);
+	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
+	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
+	local_irq_enable();
+}
+
+/**
+ * omap_hwmod_rtc_lock - Lock the Kicker mechanism.
+ * @oh: struct omap_hwmod *
+ *
+ * RTC IP have kicker feature. This prevents spurious writes to its registers.
+ * Once the RTC registers are written, KICK mechanism needs to be locked,
+ * in order to prevent any spurious writes. This function locks back the RTC
+ * registers once hwmod completes its write into sysconfig register.
+ */
+void omap_hwmod_rtc_lock(struct omap_hwmod *oh)
+{
+	local_irq_disable();
+	omap_rtc_wait_not_busy(oh);
+	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG);
+	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG);
+	local_irq_enable();
+}
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 821171cf6..05e20aaf6 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -14,24 +14,39 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/ti_wilink_st.h>
+#include <linux/wl12xx.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <linux/platform_data/pinctrl-single.h>
+#include <linux/platform_data/hsmmc-omap.h>
 #include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/wkup_m3.h>
+#include <linux/platform_data/pwm_omap_dmtimer.h>
+#include <linux/platform_data/media/ir-rx51.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <plat/dmtimer.h>
 
 #include "common.h"
 #include "common-board-devices.h"
 #include "dss-common.h"
 #include "control.h"
 #include "omap_device.h"
+#include "omap-pm.h"
 #include "omap-secure.h"
 #include "soc.h"
+#include "hsmmc.h"
+
+static struct omap_hsmmc_platform_data __maybe_unused mmc_pdata[2];
 
 struct pdata_init {
 	const char *compatible;
 	void (*fn)(void);
 };
 
-struct of_dev_auxdata omap_auxdata_lookup[];
+static struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
 #ifdef CONFIG_MACH_NOKIA_N8X0
@@ -128,7 +143,7 @@ static void __init omap3_sbc_t3530_legacy_init(void)
 	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
 }
 
-struct ti_st_plat_data wilink_pdata = {
+static struct ti_st_plat_data wilink_pdata = {
 	.nshutdown_gpio = 137,
 	.dev_name = "/dev/ttyO1",
 	.flow_cntrl = 1,
@@ -143,6 +158,21 @@ static struct platform_device wl18xx_device = {
 	}
 };
 
+static struct ti_st_plat_data wilink7_pdata = {
+	.nshutdown_gpio = 162,
+	.dev_name = "/dev/ttyO1",
+	.flow_cntrl = 1,
+	.baud_rate = 300000,
+};
+
+static struct platform_device wl128x_device = {
+	.name	= "kim",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wilink7_pdata,
+	}
+};
+
 static struct platform_device btwilink_device = {
 	.name	= "btwilink",
 	.id	= -1,
@@ -247,6 +277,8 @@ static struct platform_device omap3_rom_rng_device = {
 static void __init nokia_n900_legacy_init(void)
 {
 	hsmmc2_internal_input_clk();
+	mmc_pdata[0].name = "external";
+	mmc_pdata[1].name = "internal";
 
 	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
 		if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
@@ -258,9 +290,8 @@ static void __init nokia_n900_legacy_init(void)
 			pr_warn("Thumb binaries may crash randomly without this workaround\n");
 		}
 
-		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+		pr_info("RX-51: Registering OMAP3 HWRNG device\n");
 		platform_device_register(&omap3_rom_rng_device);
-
 	}
 }
 
@@ -268,6 +299,118 @@ static void __init omap3_tao3530_legacy_init(void)
 {
 	hsmmc2_internal_input_clk();
 }
+
+static void __init omap3_logicpd_torpedo_init(void)
+{
+	omap3_gpio126_127_129();
+	platform_device_register(&wl128x_device);
+	platform_device_register(&btwilink_device);
+}
+
+/* omap3pandora legacy devices */
+#define PANDORA_WIFI_IRQ_GPIO		21
+#define PANDORA_WIFI_NRESET_GPIO	23
+
+static struct platform_device pandora_backlight = {
+	.name	= "pandora-backlight",
+	.id	= -1,
+};
+
+static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
+};
+
+static struct regulator_init_data pandora_vmmc3 = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
+	.consumer_supplies	= pandora_vmmc3_supply,
+};
+
+static struct fixed_voltage_config pandora_vwlan = {
+	.supply_name		= "vwlan",
+	.microvolts		= 1800000, /* 1.8V */
+	.gpio			= PANDORA_WIFI_NRESET_GPIO,
+	.startup_delay		= 50000, /* 50ms */
+	.enable_high		= 1,
+	.init_data		= &pandora_vmmc3,
+};
+
+static struct platform_device pandora_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &pandora_vwlan,
+	},
+};
+
+static void pandora_wl1251_init_card(struct mmc_card *card)
+{
+	/*
+	 * We have TI wl1251 attached to MMC3. Pass this information to
+	 * SDIO core because it can't be probed by normal methods.
+	 */
+	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+		card->cccr.wide_bus = 1;
+		card->cis.vendor = 0x104c;
+		card->cis.device = 0x9066;
+		card->cis.blksize = 512;
+		card->cis.max_dtr = 24000000;
+		card->ocr = 0x80;
+	}
+}
+
+static struct omap2_hsmmc_info pandora_mmc3[] = {
+	{
+		.mmc		= 3,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.init_card	= pandora_wl1251_init_card,
+	},
+	{}	/* Terminator */
+};
+
+static void __init pandora_wl1251_init(void)
+{
+	struct wl1251_platform_data pandora_wl1251_pdata;
+	int ret;
+
+	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
+
+	pandora_wl1251_pdata.power_gpio = -1;
+
+	ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
+	if (ret < 0)
+		goto fail;
+
+	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
+	if (pandora_wl1251_pdata.irq < 0)
+		goto fail_irq;
+
+	pandora_wl1251_pdata.use_eeprom = true;
+	ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
+	if (ret < 0)
+		goto fail_irq;
+
+	return;
+
+fail_irq:
+	gpio_free(PANDORA_WIFI_IRQ_GPIO);
+fail:
+	pr_err("wl1251 board initialisation failed\n");
+}
+
+static void __init omap3_pandora_legacy_init(void)
+{
+	platform_device_register(&pandora_backlight);
+	platform_device_register(&pandora_vwlan_device);
+	omap_hsmmc_init(pandora_mmc3);
+	omap_hsmmc_late_init(pandora_mmc3);
+	pandora_wl1251_init();
+}
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
@@ -278,6 +421,14 @@ static struct iommu_platform_data omap4_iommu_pdata = {
 };
 #endif
 
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+static struct wkup_m3_platform_data wkup_m3_data = {
+	.reset_name = "wkup_m3",
+	.assert_reset = omap_device_assert_hardreset,
+	.deassert_reset = omap_device_deassert_hardreset,
+};
+#endif
+
 #ifdef CONFIG_SOC_OMAP5
 static void __init omap5_uevm_legacy_init(void)
 {
@@ -307,6 +458,55 @@ void omap_auxdata_legacy_init(struct device *dev)
 	dev->platform_data = &twl_gpio_auxdata;
 }
 
+/* Dual mode timer PWM callbacks platdata */
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
+	.request_by_node = omap_dm_timer_request_by_node,
+	.request_specific = omap_dm_timer_request_specific,
+	.request = omap_dm_timer_request,
+	.set_source = omap_dm_timer_set_source,
+	.get_irq = omap_dm_timer_get_irq,
+	.set_int_enable = omap_dm_timer_set_int_enable,
+	.set_int_disable = omap_dm_timer_set_int_disable,
+	.free = omap_dm_timer_free,
+	.enable = omap_dm_timer_enable,
+	.disable = omap_dm_timer_disable,
+	.get_fclk = omap_dm_timer_get_fclk,
+	.start = omap_dm_timer_start,
+	.stop = omap_dm_timer_stop,
+	.set_load = omap_dm_timer_set_load,
+	.set_match = omap_dm_timer_set_match,
+	.set_pwm = omap_dm_timer_set_pwm,
+	.set_prescaler = omap_dm_timer_set_prescaler,
+	.read_counter = omap_dm_timer_read_counter,
+	.write_counter = omap_dm_timer_write_counter,
+	.read_status = omap_dm_timer_read_status,
+	.write_status = omap_dm_timer_write_status,
+};
+#endif
+
+static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = {
+	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
+};
+
+static struct platform_device __maybe_unused rx51_lirc_device = {
+	.name           = "lirc_rx51",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &rx51_lirc_data,
+	},
+};
+
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+static struct omap_mcbsp_platform_data mcbsp_pdata;
+static void __init omap3_mcbsp_init(void)
+{
+	omap3_mcbsp_init_pdata_callback(&mcbsp_pdata);
+}
+#else
+static void __init omap3_mcbsp_init(void) {}
+#endif
+
 /*
  * Few boards still need auxdata populated before we populate
  * the dev entries in of_platform_populate().
@@ -323,36 +523,38 @@ static struct pdata_init auxdata_quirks[] __initdata = {
 	{ /* sentinel */ },
 };
 
-struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #ifdef CONFIG_MACH_NOKIA_N8X0
 	OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
 	OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
 	OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
 #endif
 #ifdef CONFIG_ARCH_OMAP3
-	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
-	OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
-	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
 		       &omap3_iommu_pdata),
+	OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
+	OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
+	OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data),
 	/* Only on am3517 */
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
 		       &am35xx_emac_pdata),
+	/* McBSP modules with sidetone core */
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata),
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata),
 #endif
-#ifdef CONFIG_ARCH_OMAP4
-	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
-	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
-#endif
-#ifdef CONFIG_SOC_OMAP5
-	OF_DEV_AUXDATA("ti,omap5-padconf", 0x4a002840, "4a002840.pinmux", &pcs_pdata),
-	OF_DEV_AUXDATA("ti,omap5-padconf", 0x4ae0c840, "4ae0c840.pinmux", &pcs_pdata),
 #endif
-#ifdef CONFIG_SOC_DRA7XX
-	OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata),
+#ifdef CONFIG_SOC_AM33XX
+	OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+		       &wkup_m3_data),
 #endif
 #ifdef CONFIG_SOC_AM43XX
-	OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+		       &wkup_m3_data),
+#endif
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+	OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
 #endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
@@ -360,6 +562,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
 		       &omap4_iommu_pdata),
 #endif
+	/* Common auxdata */
+	OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
 	{ /* sentinel */ },
 };
 
@@ -377,10 +581,12 @@ static struct pdata_init pdata_quirks[] __initdata = {
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
 	{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
-	{ "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
+	{ "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
 	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
 	{ "ti,am3517-evm", am3517_evm_legacy_init, },
 	{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
+	{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
+	{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
 #endif
 #ifdef CONFIG_SOC_OMAP5
 	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
@@ -402,7 +608,16 @@ static void pdata_quirks_check(struct pdata_init *quirks)
 
 void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 {
-	omap_sdrc_init(NULL, NULL);
+	/*
+	 * We still need this for omap2420 and omap3 PM to work, others are
+	 * using drivers/misc/sram.c already.
+	 */
+	if (of_machine_is_compatible("ti,omap2420") ||
+	    of_machine_is_compatible("ti,omap3"))
+		omap_sdrc_init(NULL, NULL);
+
+	if (of_machine_is_compatible("ti,omap3"))
+		omap3_mcbsp_init();
 	pdata_quirks_check(auxdata_quirks);
 	of_platform_populate(NULL, omap_dt_match_table,
 			     omap_auxdata_lookup, NULL);
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 58920bc88..678d2a31d 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -110,13 +110,7 @@ static void __init omap2_init_processor_devices(void)
 
 int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
-	/* XXX The usecount test is racy */
-	if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) &&
-	    !(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING))
-		clkdm_allow_idle(clkdm);
-	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
-		 clkdm->usecount == 0)
-		clkdm_sleep(clkdm);
+	clkdm_allow_idle(clkdm);
 	return 0;
 }
 
@@ -277,13 +271,10 @@ static void __init omap4_init_voltages(void)
 
 static inline void omap_init_cpufreq(void)
 {
-	struct platform_device_info devinfo = { };
+	struct platform_device_info devinfo = { .name = "omap-cpufreq" };
 
 	if (!of_have_populated_dt())
-		devinfo.name = "omap-cpufreq";
-	else
-		devinfo.name = "cpufreq-dt";
-	platform_device_register_full(&devinfo);
+		platform_device_register_full(&devinfo);
 }
 
 static int __init omap2_common_pm_init(void)
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 425bfcd67..b668719b9 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -103,7 +103,8 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { }
 #define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD	(1 << 0)
 #define PM_OMAP4_CPU_OSWR_DISABLE		(1 << 1)
 
-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_PM) && (defined(CONFIG_ARCH_OMAP4) ||\
+	   defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX))
 extern u16 pm44xx_errata;
 #define IS_PM44XX_ERRATUM(id)		(pm44xx_errata & (id))
 #else
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index b1aad7e14..2a1a4180d 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -25,6 +25,7 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/irq.h>
 #include <linux/time.h>
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 87b98bf92..d44e0e2f1 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -198,7 +198,6 @@ void omap_sram_idle(void)
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
 	int per_going_off;
-	int core_prev_state;
 	u32 sdrc_pwr = 0;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
@@ -278,16 +277,20 @@ void omap_sram_idle(void)
 		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 
 	/* CORE */
-	if (core_next_state < PWRDM_POWER_ON) {
-		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
-		if (core_prev_state == PWRDM_POWER_OFF) {
-			omap3_core_restore_context();
-			omap3_cm_restore_context();
-			omap3_sram_restore_context();
-			omap2_sms_restore_context();
-		}
+	if (core_next_state < PWRDM_POWER_ON &&
+	    pwrdm_read_prev_pwrst(core_pwrdm) == PWRDM_POWER_OFF) {
+		omap3_core_restore_context();
+		omap3_cm_restore_context();
+		omap3_sram_restore_context();
+		omap2_sms_restore_context();
+	} else {
+		/*
+		 * In off-mode resume path above, omap3_core_restore_context
+		 * also handles the INTC autoidle restore done here so limit
+		 * this to non-off mode resume paths so we don't do it twice.
+		 */
+		omap3_intc_resume_idle();
 	}
-	omap3_intc_resume_idle();
 
 	pwrdm_post_transition(NULL);
 
@@ -301,11 +304,11 @@ static void omap3_pm_idle(void)
 	if (omap_irq_pending())
 		return;
 
-	trace_cpu_idle(1, smp_processor_id());
+	trace_cpu_idle_rcuidle(1, smp_processor_id());
 
 	omap_sram_idle();
 
-	trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
+	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 }
 
 #ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index d697cecf7..178e22c14 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -210,7 +210,7 @@ static inline int omap4plus_init_static_deps(const struct static_dep_map *map)
 		}
 
 		map++;
-	};
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 78af6d8cf..76eb6ec5f 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -186,8 +186,9 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 			trace_state = (PWRDM_TRACE_STATES_FLAG |
 				       ((next & OMAP_POWERSTATE_MASK) << 8) |
 				       ((prev & OMAP_POWERSTATE_MASK) << 0));
-			trace_power_domain_target(pwrdm->name, trace_state,
-						  smp_processor_id());
+			trace_power_domain_target_rcuidle(pwrdm->name,
+							  trace_state,
+							  smp_processor_id());
 		}
 		break;
 	default:
@@ -222,7 +223,6 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
  * @pwrdm: struct powerdomain * to operate on
  * @curr_pwrst: current power state of @pwrdm
  * @pwrst: power state to switch to
- * @hwsup: ptr to a bool to return whether the clkdm is hardware-supervised
  *
  * Determine whether the powerdomain needs to be turned on before
  * attempting to switch power states.  Called by
@@ -233,8 +233,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
  * "Types of sleep_switch" comment above).
  */
 static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
-					       u8 curr_pwrst, u8 pwrst,
-					       bool *hwsup)
+					       u8 curr_pwrst, u8 pwrst)
 {
 	u8 sleep_switch;
 
@@ -244,8 +243,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
 		    arch_pwrdm->pwrdm_set_lowpwrstchange) {
 			sleep_switch = LOWPOWERSTATE_SWITCH;
 		} else {
-			*hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
-			clkdm_wakeup_nolock(pwrdm->pwrdm_clkdms[0]);
+			clkdm_deny_idle_nolock(pwrdm->pwrdm_clkdms[0]);
 			sleep_switch = FORCEWAKEUP_SWITCH;
 		}
 	} else {
@@ -259,7 +257,6 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
  * _pwrdm_restore_clkdm_state - restore the clkdm hwsup state after pwrst change
  * @pwrdm: struct powerdomain * to operate on
  * @sleep_switch: return value from _pwrdm_save_clkdm_state_and_activate()
- * @hwsup: should @pwrdm's first clockdomain be set to hardware-supervised mode?
  *
  * Restore the clockdomain state perturbed by
  * _pwrdm_save_clkdm_state_and_activate(), and call the power state
@@ -270,14 +267,11 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
  * software-supervised sleep.  No return value.
  */
 static void _pwrdm_restore_clkdm_state(struct powerdomain *pwrdm,
-				       u8 sleep_switch, bool hwsup)
+				       u8 sleep_switch)
 {
 	switch (sleep_switch) {
 	case FORCEWAKEUP_SWITCH:
-		if (hwsup)
-			clkdm_allow_idle_nolock(pwrdm->pwrdm_clkdms[0]);
-		else
-			clkdm_sleep_nolock(pwrdm->pwrdm_clkdms[0]);
+		clkdm_allow_idle_nolock(pwrdm->pwrdm_clkdms[0]);
 		break;
 	case LOWPOWERSTATE_SWITCH:
 		if (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
@@ -523,8 +517,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
 		/* Trace the pwrdm desired target state */
-		trace_power_domain_target(pwrdm->name, pwrst,
-					  smp_processor_id());
+		trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
+						  smp_processor_id());
 		/* Program the pwrdm desired target state */
 		ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
 	}
@@ -1092,7 +1086,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 	u8 next_pwrst, sleep_switch;
 	int curr_pwrst;
 	int ret = 0;
-	bool hwsup = false;
 
 	if (!pwrdm || IS_ERR(pwrdm))
 		return -EINVAL;
@@ -1116,14 +1109,14 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 		goto osps_out;
 
 	sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst,
-							    pwrst, &hwsup);
+							    pwrst);
 
 	ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
 	if (ret)
 		pr_err("%s: unable to set power state of powerdomain: %s\n",
 		       __func__, pwrdm->name);
 
-	_pwrdm_restore_clkdm_state(pwrdm, sleep_switch, hwsup);
+	_pwrdm_restore_clkdm_state(pwrdm, sleep_switch);
 
 osps_out:
 	pwrdm_unlock(pwrdm);
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 70bc7066a..eb27ae066 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -349,14 +349,49 @@ static struct powerdomain device_81xx_pwrdm = {
 	.voltdm		  = { .name = "core" },
 };
 
-static struct powerdomain active_816x_pwrdm = {
+static struct powerdomain gem_814x_pwrdm = {
+	.name		= "gem_pwrdm",
+	.prcm_offs	= TI814X_PRM_DSP_MOD,
+	.pwrsts		= PWRSTS_OFF_ON,
+	.voltdm		= { .name = "dsp" },
+};
+
+static struct powerdomain ivahd_814x_pwrdm = {
+	.name		= "ivahd_pwrdm",
+	.prcm_offs	= TI814X_PRM_HDVICP_MOD,
+	.pwrsts		= PWRSTS_OFF_ON,
+	.voltdm		= { .name = "iva" },
+};
+
+static struct powerdomain hdvpss_814x_pwrdm = {
+	.name		= "hdvpss_pwrdm",
+	.prcm_offs	= TI814X_PRM_HDVPSS_MOD,
+	.pwrsts		= PWRSTS_OFF_ON,
+	.voltdm		= { .name = "dsp" },
+};
+
+static struct powerdomain sgx_814x_pwrdm = {
+	.name		= "sgx_pwrdm",
+	.prcm_offs	= TI814X_PRM_GFX_MOD,
+	.pwrsts		= PWRSTS_OFF_ON,
+	.voltdm		= { .name = "core" },
+};
+
+static struct powerdomain isp_814x_pwrdm = {
+	.name		= "isp_pwrdm",
+	.prcm_offs	= TI814X_PRM_ISP_MOD,
+	.pwrsts		= PWRSTS_OFF_ON,
+	.voltdm		= { .name = "core" },
+};
+
+static struct powerdomain active_81xx_pwrdm = {
 	.name		  = "active_pwrdm",
 	.prcm_offs	  = TI816X_PRM_ACTIVE_MOD,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.voltdm		  = { .name = "core" },
 };
 
-static struct powerdomain default_816x_pwrdm = {
+static struct powerdomain default_81xx_pwrdm = {
 	.name		  = "default_pwrdm",
 	.prcm_offs	  = TI81XX_PRM_DEFAULT_MOD,
 	.pwrsts		  = PWRSTS_OFF_ON,
@@ -448,11 +483,24 @@ static struct powerdomain *powerdomains_am35x[] __initdata = {
 	NULL
 };
 
-static struct powerdomain *powerdomains_ti81xx[] __initdata = {
+static struct powerdomain *powerdomains_ti814x[] __initdata = {
 	&alwon_81xx_pwrdm,
 	&device_81xx_pwrdm,
-	&active_816x_pwrdm,
-	&default_816x_pwrdm,
+	&active_81xx_pwrdm,
+	&default_81xx_pwrdm,
+	&gem_814x_pwrdm,
+	&ivahd_814x_pwrdm,
+	&hdvpss_814x_pwrdm,
+	&sgx_814x_pwrdm,
+	&isp_814x_pwrdm,
+	NULL
+};
+
+static struct powerdomain *powerdomains_ti816x[] __initdata = {
+	&alwon_81xx_pwrdm,
+	&device_81xx_pwrdm,
+	&active_81xx_pwrdm,
+	&default_81xx_pwrdm,
 	&ivahd0_816x_pwrdm,
 	&ivahd1_816x_pwrdm,
 	&ivahd2_816x_pwrdm,
@@ -460,6 +508,73 @@ static struct powerdomain *powerdomains_ti81xx[] __initdata = {
 	NULL
 };
 
+/* TI81XX specific ops */
+#define TI81XX_PM_PWSTCTRL				0x0000
+#define TI81XX_RM_RSTCTRL				0x0010
+#define TI81XX_PM_PWSTST				0x0004
+
+static int ti81xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+				   (pwrst << OMAP_POWERSTATE_SHIFT),
+				   pwrdm->prcm_offs, TI81XX_PM_PWSTCTRL);
+	return 0;
+}
+
+static int ti81xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     TI81XX_PM_PWSTCTRL,
+					     OMAP_POWERSTATE_MASK);
+}
+
+static int ti81xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+		(pwrdm->prcm_offs == TI814X_PRM_GFX_MOD) ? TI81XX_RM_RSTCTRL :
+					     TI81XX_PM_PWSTST,
+					     OMAP_POWERSTATEST_MASK);
+}
+
+static int ti81xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+		(pwrdm->prcm_offs == TI814X_PRM_GFX_MOD) ? TI81XX_RM_RSTCTRL :
+					     TI81XX_PM_PWSTST,
+					     OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int ti81xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+	u32 c = 0;
+
+	while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs,
+		(pwrdm->prcm_offs == TI814X_PRM_GFX_MOD) ? TI81XX_RM_RSTCTRL :
+				       TI81XX_PM_PWSTST) &
+		OMAP_INTRANSITION_MASK) &&
+		(c++ < PWRDM_TRANSITION_BAILOUT))
+			udelay(1);
+
+	if (c > PWRDM_TRANSITION_BAILOUT) {
+		pr_err("powerdomain: %s timeout waiting for transition\n",
+		       pwrdm->name);
+		return -EAGAIN;
+	}
+
+	pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+	return 0;
+}
+
+/* For dm814x we need to fix up fix GFX pwstst and rstctrl reg offsets */
+static struct pwrdm_ops ti81xx_pwrdm_operations = {
+	.pwrdm_set_next_pwrst	= ti81xx_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= ti81xx_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= ti81xx_pwrdm_read_pwrst,
+	.pwrdm_read_logic_pwrst	= ti81xx_pwrdm_read_logic_pwrst,
+	.pwrdm_wait_transition	= ti81xx_pwrdm_wait_transition,
+};
+
 void __init omap3xxx_powerdomains_init(void)
 {
 	unsigned int rev;
@@ -467,15 +582,22 @@ void __init omap3xxx_powerdomains_init(void)
 	if (!cpu_is_omap34xx() && !cpu_is_ti81xx())
 		return;
 
-	pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
+	/* Only 81xx needs custom pwrdm_operations */
+	if (!cpu_is_ti81xx())
+		pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
 
 	rev = omap_rev();
 
 	if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
 		pwrdm_register_pwrdms(powerdomains_am35x);
+	} else if (rev == TI8148_REV_ES1_0 || rev == TI8148_REV_ES2_0 ||
+		   rev == TI8148_REV_ES2_1) {
+		pwrdm_register_platform_funcs(&ti81xx_pwrdm_operations);
+		pwrdm_register_pwrdms(powerdomains_ti814x);
 	} else if (rev == TI8168_REV_ES1_0 || rev == TI8168_REV_ES1_1
 			|| rev == TI8168_REV_ES2_0 || rev == TI8168_REV_ES2_1) {
-		pwrdm_register_pwrdms(powerdomains_ti81xx);
+		pwrdm_register_platform_funcs(&ti81xx_pwrdm_operations);
+		pwrdm_register_pwrdms(powerdomains_ti816x);
 	} else {
 		pwrdm_register_pwrdms(powerdomains_omap3430_common);
 
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 287a2037a..eb350a673 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -35,20 +35,13 @@ static struct powerdomain iva_7xx_pwrdm = {
 	.name		  = "iva_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_IVA_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 4,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* hwa_mem */
-		[1] = PWRSTS_OFF_RET,	/* sl2_mem */
-		[2] = PWRSTS_OFF_RET,	/* tcm1_mem */
-		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* hwa_mem */
-		[1] = PWRSTS_OFF_RET,	/* sl2_mem */
-		[2] = PWRSTS_OFF_RET,	/* tcm1_mem */
-		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
+		[0] = PWRSTS_ON,	/* hwa_mem */
+		[1] = PWRSTS_ON,	/* sl2_mem */
+		[2] = PWRSTS_ON,	/* tcm1_mem */
+		[3] = PWRSTS_ON,	/* tcm2_mem */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -75,16 +68,11 @@ static struct powerdomain ipu_7xx_pwrdm = {
 	.name		  = "ipu_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_IPU_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 2,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* aessmem */
-		[1] = PWRSTS_OFF_RET,	/* periphmem */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* aessmem */
-		[1] = PWRSTS_OFF_RET,	/* periphmem */
+		[0] = PWRSTS_ON,	/* aessmem */
+		[1] = PWRSTS_ON,	/* periphmem */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -94,14 +82,10 @@ static struct powerdomain dss_7xx_pwrdm = {
 	.name		  = "dss_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_DSS_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* dss_mem */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* dss_mem */
+		[0] = PWRSTS_ON,	/* dss_mem */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -111,16 +95,11 @@ static struct powerdomain l4per_7xx_pwrdm = {
 	.name		  = "l4per_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_L4PER_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts		  = PWRSTS_ON,
 	.banks		  = 2,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* nonretained_bank */
-		[1] = PWRSTS_OFF_RET,	/* retained_bank */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* nonretained_bank */
-		[1] = PWRSTS_OFF_RET,	/* retained_bank */
+		[0] = PWRSTS_ON,	/* nonretained_bank */
+		[1] = PWRSTS_ON,	/* retained_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -132,11 +111,8 @@ static struct powerdomain gpu_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* gpu_mem */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* gpu_mem */
+		[0] = PWRSTS_ON,	/* gpu_mem */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -148,8 +124,6 @@ static struct powerdomain wkupaon_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-	},
 	.pwrsts_mem_on	= {
 		[0] = PWRSTS_ON,	/* wkup_bank */
 	},
@@ -160,22 +134,14 @@ static struct powerdomain core_7xx_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_CORE_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_INA_ON,
-	.pwrsts_logic_ret = PWRSTS_RET,
+	.pwrsts		  = PWRSTS_ON,
 	.banks		  = 5,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* core_nret_bank */
-		[1] = PWRSTS_OFF_RET,	/* core_ocmram */
-		[2] = PWRSTS_OFF_RET,	/* core_other_bank */
-		[3] = PWRSTS_OFF_RET,	/* ipu_l2ram */
-		[4] = PWRSTS_OFF_RET,	/* ipu_unicache */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* core_nret_bank */
-		[1] = PWRSTS_OFF_RET,	/* core_ocmram */
-		[2] = PWRSTS_OFF_RET,	/* core_other_bank */
-		[3] = PWRSTS_OFF_RET,	/* ipu_l2ram */
-		[4] = PWRSTS_OFF_RET,	/* ipu_unicache */
+		[0] = PWRSTS_ON,	/* core_nret_bank */
+		[1] = PWRSTS_ON,	/* core_ocmram */
+		[2] = PWRSTS_ON,	/* core_other_bank */
+		[3] = PWRSTS_ON,	/* ipu_l2ram */
+		[4] = PWRSTS_ON,	/* ipu_unicache */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -225,14 +191,10 @@ static struct powerdomain vpe_7xx_pwrdm = {
 	.name		  = "vpe_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_VPE_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* vpe_bank */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* vpe_bank */
+		[0] = PWRSTS_ON,	/* vpe_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -250,8 +212,8 @@ static struct powerdomain mpu_7xx_pwrdm = {
 		[1] = PWRSTS_RET,	/* mpu_ram */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* mpu_l2 */
-		[1] = PWRSTS_OFF_RET,	/* mpu_ram */
+		[0] = PWRSTS_ON,	/* mpu_l2 */
+		[1] = PWRSTS_ON,	/* mpu_ram */
 	},
 };
 
@@ -260,18 +222,12 @@ static struct powerdomain l3init_7xx_pwrdm = {
 	.name		  = "l3init_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_L3INIT_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts		  = PWRSTS_ON,
 	.banks		  = 3,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* gmac_bank */
-		[1] = PWRSTS_OFF_RET,	/* l3init_bank1 */
-		[2] = PWRSTS_OFF_RET,	/* l3init_bank2 */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* gmac_bank */
-		[1] = PWRSTS_OFF_RET,	/* l3init_bank1 */
-		[2] = PWRSTS_OFF_RET,	/* l3init_bank2 */
+		[0] = PWRSTS_ON,	/* gmac_bank */
+		[1] = PWRSTS_ON,	/* l3init_bank1 */
+		[2] = PWRSTS_ON,	/* l3init_bank2 */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -283,11 +239,8 @@ static struct powerdomain eve3_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* eve3_bank */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* eve3_bank */
+		[0] = PWRSTS_ON,	/* eve3_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -299,11 +252,8 @@ static struct powerdomain emu_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* emu_bank */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* emu_bank */
+		[0] = PWRSTS_ON,	/* emu_bank */
 	},
 };
 
@@ -314,15 +264,10 @@ static struct powerdomain dsp2_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 3,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* dsp2_edma */
-		[1] = PWRSTS_OFF_RET,	/* dsp2_l1 */
-		[2] = PWRSTS_OFF_RET,	/* dsp2_l2 */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* dsp2_edma */
-		[1] = PWRSTS_OFF_RET,	/* dsp2_l1 */
-		[2] = PWRSTS_OFF_RET,	/* dsp2_l2 */
+		[0] = PWRSTS_ON,	/* dsp2_edma */
+		[1] = PWRSTS_ON,	/* dsp2_l1 */
+		[2] = PWRSTS_ON,	/* dsp2_l2 */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -334,15 +279,10 @@ static struct powerdomain dsp1_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 3,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* dsp1_edma */
-		[1] = PWRSTS_OFF_RET,	/* dsp1_l1 */
-		[2] = PWRSTS_OFF_RET,	/* dsp1_l2 */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* dsp1_edma */
-		[1] = PWRSTS_OFF_RET,	/* dsp1_l1 */
-		[2] = PWRSTS_OFF_RET,	/* dsp1_l2 */
+		[0] = PWRSTS_ON,	/* dsp1_edma */
+		[1] = PWRSTS_ON,	/* dsp1_l1 */
+		[2] = PWRSTS_ON,	/* dsp1_l2 */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -354,11 +294,8 @@ static struct powerdomain cam_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* vip_bank */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* vip_bank */
+		[0] = PWRSTS_ON,	/* vip_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -370,11 +307,8 @@ static struct powerdomain eve4_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* eve4_bank */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* eve4_bank */
+		[0] = PWRSTS_ON,	/* eve4_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -386,11 +320,8 @@ static struct powerdomain eve2_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* eve2_bank */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* eve2_bank */
+		[0] = PWRSTS_ON,	/* eve2_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -402,11 +333,8 @@ static struct powerdomain eve1_7xx_pwrdm = {
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* eve1_bank */
-	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* eve1_bank */
+		[0] = PWRSTS_ON,	/* eve1_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 6ae0b3a17..c8f590b7c 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -51,6 +51,12 @@
 /*
  * TI81XX PRM module offsets
  */
+#define TI814X_PRM_DSP_MOD				0x0a00
+#define TI814X_PRM_HDVICP_MOD				0x0c00
+#define TI814X_PRM_ISP_MOD				0x0d00
+#define TI814X_PRM_HDVPSS_MOD				0x0e00
+#define TI814X_PRM_GFX_MOD				0x0f00
+
 #define TI81XX_PRM_DEVICE_MOD			0x0000
 #define TI816X_PRM_ACTIVE_MOD			0x0a00
 #define TI81XX_PRM_DEFAULT_MOD			0x0b00
@@ -472,6 +478,7 @@ struct omap_prcm_irq {
  * struct omap_prcm_irq_setup - PRCM interrupt controller details
  * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register
  * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register
+ * @pm_ctrl: PRM register offset for the PRM_IO_PMCTRL register
  * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers
  * @nr_irqs: number of entries in the @irqs array
  * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs)
@@ -494,6 +501,7 @@ struct omap_prcm_irq {
 struct omap_prcm_irq_setup {
 	u16 ack;
 	u16 mask;
+	u16 pm_ctrl;
 	u8 nr_regs;
 	u8 nr_irqs;
 	const struct omap_prcm_irq *irqs;
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7eebc27fa..babb5db5a 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -25,6 +25,13 @@
 #define AM43XX_PRM_WKUP_INST				0x2000
 #define AM43XX_PRM_DEVICE_INST				0x4000
 
+/* PRM_IRQ offsets */
+#define AM43XX_PRM_IRQSTATUS_MPU_OFFSET			0x0004
+#define AM43XX_PRM_IRQENABLE_MPU_OFFSET			0x0008
+
+/* Other PRM offsets */
+#define AM43XX_PRM_IO_PMCTRL_OFFSET			0x0024
+
 /* RM RSTCTRL offsets */
 #define AM43XX_RM_PER_RSTCTRL_OFFSET			0x0010
 #define AM43XX_RM_GFX_RSTCTRL_OFFSET			0x0010
@@ -32,6 +39,7 @@
 
 /* RM RSTST offsets */
 #define AM43XX_RM_GFX_RSTST_OFFSET			0x0014
+#define AM43XX_RM_PER_RSTST_OFFSET			0x0014
 #define AM43XX_RM_WKUP_RSTST_OFFSET			0x0014
 
 /* CM instances */
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
index 2bc4ec52b..66302c6ab 100644
--- a/arch/arm/mach-omap2/prm33xx.h
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -52,8 +52,6 @@
 /* PRM.PER_PRM register offsets */
 #define AM33XX_RM_PER_RSTCTRL_OFFSET		0x0000
 #define AM33XX_RM_PER_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000)
-#define AM33XX_RM_PER_RSTST_OFFSET		0x0004
-#define AM33XX_RM_PER_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004)
 #define AM33XX_PM_PER_PWRSTST_OFFSET		0x0008
 #define AM33XX_PM_PER_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008)
 #define AM33XX_PM_PER_PWRSTCTRL_OFFSET		0x000c
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 4541700f7..30768003f 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -18,13 +18,14 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of_irq.h>
-
+#include <linux/of.h>
 
 #include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "vp.h"
 #include "prm44xx.h"
+#include "prcm43xx.h"
 #include "prm-regbits-44xx.h"
 #include "prcm44xx.h"
 #include "prminst44xx.h"
@@ -45,6 +46,7 @@ static const struct omap_prcm_irq omap4_prcm_irqs[] = {
 static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
 	.ack			= OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
 	.mask			= OMAP4_PRM_IRQENABLE_MPU_OFFSET,
+	.pm_ctrl		= OMAP4_PRM_IO_PMCTRL_OFFSET,
 	.nr_regs		= 2,
 	.irqs			= omap4_prcm_irqs,
 	.nr_irqs		= ARRAY_SIZE(omap4_prcm_irqs),
@@ -216,11 +218,11 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
  */
 static void omap44xx_prm_read_pending_irqs(unsigned long *events)
 {
-	events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
-					  OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
+	int i;
 
-	events[1] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_2_OFFSET,
-					  OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
+	for (i = 0; i < omap4_prcm_irq_setup.nr_regs; i++)
+		events[i] = _read_pending_irq_reg(omap4_prcm_irq_setup.mask +
+				i * 4, omap4_prcm_irq_setup.ack + i * 4);
 }
 
 /**
@@ -250,17 +252,17 @@ static void omap44xx_prm_ocp_barrier(void)
  */
 static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
-	saved_mask[0] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-					OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	saved_mask[1] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-					OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
+	int i;
+	u16 reg;
+
+	for (i = 0; i < omap4_prcm_irq_setup.nr_regs; i++) {
+		reg = omap4_prcm_irq_setup.mask + i * 4;
 
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
-				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
-				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
+		saved_mask[i] =
+			omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+						reg);
+		omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, reg);
+	}
 
 	/* OCP barrier */
 	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
@@ -279,10 +281,12 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
  */
 static void omap44xx_prm_restore_irqen(u32 *saved_mask)
 {
-	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
-				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST,
-				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
+	int i;
+
+	for (i = 0; i < omap4_prcm_irq_setup.nr_regs; i++)
+		omap4_prm_write_inst_reg(saved_mask[i],
+					 OMAP4430_PRM_OCP_SOCKET_INST,
+					 omap4_prcm_irq_setup.mask + i * 4);
 }
 
 /**
@@ -306,10 +310,10 @@ static void omap44xx_prm_reconfigure_io_chain(void)
 	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK,
 				    OMAP4430_WUCLK_CTRL_MASK,
 				    inst,
-				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+				    omap4_prcm_irq_setup.pm_ctrl);
 	omap_test_timeout(
 		(((omap4_prm_read_inst_reg(inst,
-					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
+					   omap4_prcm_irq_setup.pm_ctrl) &
 		   OMAP4430_WUCLK_STATUS_MASK) >>
 		  OMAP4430_WUCLK_STATUS_SHIFT) == 1),
 		MAX_IOPAD_LATCH_TIME, i);
@@ -319,10 +323,10 @@ static void omap44xx_prm_reconfigure_io_chain(void)
 	/* Trigger WUCLKIN disable */
 	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
 				    inst,
-				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+				    omap4_prcm_irq_setup.pm_ctrl);
 	omap_test_timeout(
 		(((omap4_prm_read_inst_reg(inst,
-					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
+					   omap4_prcm_irq_setup.pm_ctrl) &
 		   OMAP4430_WUCLK_STATUS_MASK) >>
 		  OMAP4430_WUCLK_STATUS_SHIFT) == 0),
 		MAX_IOPAD_LATCH_TIME, i);
@@ -350,7 +354,7 @@ static void __init omap44xx_prm_enable_io_wakeup(void)
 	omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
 				    OMAP4430_GLOBAL_WUEN_MASK,
 				    inst,
-				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+				    omap4_prcm_irq_setup.pm_ctrl);
 }
 
 /**
@@ -719,6 +723,15 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 
 	omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
 
+	/* Add AM437X specific differences */
+	if (of_device_is_compatible(data->np, "ti,am4-prcm")) {
+		omap4_prcm_irq_setup.nr_irqs = 1;
+		omap4_prcm_irq_setup.nr_regs = 1;
+		omap4_prcm_irq_setup.pm_ctrl = AM43XX_PRM_IO_PMCTRL_OFFSET;
+		omap4_prcm_irq_setup.ack = AM43XX_PRM_IRQSTATUS_MPU_OFFSET;
+		omap4_prcm_irq_setup.mask = AM43XX_PRM_IRQENABLE_MPU_OFFSET;
+	}
+
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
index cc1e6a2b9..294deed95 100644
--- a/arch/arm/mach-omap2/prm7xx.h
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -360,6 +360,7 @@
 /* PRM.L3INIT_PRM register offsets */
 #define DRA7XX_PM_L3INIT_PWRSTCTRL_OFFSET			0x0000
 #define DRA7XX_PM_L3INIT_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET			0x0010
 #define DRA7XX_PM_L3INIT_MMC1_WKDEP_OFFSET			0x0028
 #define DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET			0x002c
 #define DRA7XX_PM_L3INIT_MMC2_WKDEP_OFFSET			0x0030
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 7add7994d..5b2f5138d 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -102,7 +102,7 @@ static void omap_prcm_events_filter_priority(unsigned long *events,
  * dispatched accordingly. Clearing of the wakeup events should be
  * done by the SoC specific individual handlers.
  */
-static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void omap_prcm_irq_handler(struct irq_desc *desc)
 {
 	unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG];
 	unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG];
@@ -664,6 +664,13 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
 };
 #endif
 
+#ifdef CONFIG_SOC_TI81XX
+static struct omap_prcm_init_data dm814_pllss_data __initdata = {
+	.index = TI_CLKM_PLLSS,
+	.init = am33xx_prm_init,
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP4
 static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
@@ -696,6 +703,7 @@ static struct omap_prcm_init_data am4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
 	.device_inst_offset = AM43XX_PRM_DEVICE_INST,
+	.flags = PRM_HAS_IO_WAKEUP,
 };
 #endif
 
@@ -705,7 +713,7 @@ static struct omap_prcm_init_data scrm_data __initdata = {
 };
 #endif
 
-static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
+static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = {
 #ifdef CONFIG_SOC_AM33XX
 	{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
 #endif
@@ -714,6 +722,7 @@ static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
 #endif
 #ifdef CONFIG_SOC_TI81XX
 	{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
+	{ .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data },
 	{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
 #endif
 #ifdef CONFIG_ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 645a2a46b..f11500612 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
  * don't adjust it down as your clock period increases the refresh interval
  * will not be met. Setting all parameters for complete worst case may work,
  * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists across production samples.
  *
  * Only the FULL speed values are given. Current code is such that rate
  * changes must be made at DPLLoutx2. The actual value adjustment for low
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 5fb50fe54..8e072de89 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -213,7 +213,7 @@ static int __init omap_serial_early_init(void)
 
 	return 0;
 }
-omap_core_initcall(omap_serial_early_init);
+omap_postcore_initcall(omap_serial_early_init);
 
 /**
  * omap_serial_init_port() - initialize single serial port
@@ -252,7 +252,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 		info = omap_serial_default_info;
 
 	oh = uart->oh;
-	name = DRIVER_NAME;
+	name = OMAP_SERIAL_DRIVER_NAME;
 
 	omap_up.dma_enabled = info->dma_enabled;
 	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index eafd120b5..1b9f0520d 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	adrl	r2, l2dis_3630	@ may be too distant for plain adr
-	str	r1, [r2]
+	adrl	r3, l2dis_3630_offset	@ may be too distant for plain adr
+	ldr	r2, [r3]		@ value for offset
+	str	r1, [r2, r3]		@ write to l2dis_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
 ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
-	.text
-/* Function to call rom code to save secure ram context */
+/*
+ * Function to call rom code to save secure ram context. This gets
+ * relocated to SRAM, so it can be all in .data section. Otherwise
+ * we need to initialize api_params separately.
+ */
+	.data
 	.align	3
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
@@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context)
 ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context
 
+	.text
+
 /*
  * ======================
  * == Idle entry point ==
@@ -289,12 +296,6 @@ wait_sdrc_ready:
 	bic	r5, r5, #0x40
 	str	r5, [r4]
 
-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
 is_dll_in_lock_mode:
 	/* Is dll in lock mode? */
 	ldr	r4, sdrc_dlla_ctrl
@@ -302,11 +303,7 @@ is_dll_in_lock_mode:
 	tst	r5, #0x4
 	bne	exit_nonoff_modes	@ Return if locked
 	/* wait till dll locks */
-	adr	r7, kick_counter
 wait_dll_lock_timed:
-	ldr	r4, wait_dll_lock_counter
-	add	r4, r4, #1
-	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
 	ldr	r4, sdrc_dlla_status
 	/* Wait 20uS for lock */
 	mov	r6, #8
@@ -330,9 +327,6 @@ kick_dll:
 	orr	r6, r6, #(1<<3)		@ enable dll
 	str	r6, [r4]
 	dsb
-	ldr	r4, kick_counter
-	add	r4, r4, #1
-	str	r4, [r7]		@ kick_counter
 	b	wait_dll_lock_timed
 
 exit_nonoff_modes:
@@ -360,15 +354,6 @@ sdrc_dlla_status:
 	.word	SDRC_DLLA_STATUS_V
 sdrc_dlla_ctrl:
 	.word	SDRC_DLLA_CTRL_V
-	/*
-	 * When exporting to userspace while the counters are in SRAM,
-	 * these 2 words need to be at the end to facilitate retrival!
-	 */
-kick_counter:
-	.word	0
-wait_dll_lock_counter:
-	.word	0
-
 ENTRY(omap3_do_wfi_sz)
 	.word	. - omap3_do_wfi
 
@@ -437,7 +422,9 @@ ENTRY(omap3_restore)
 	cmp	r2, #0x0	@ Check if target power state was OFF or RET
 	bne	logic_l1_restore
 
-	ldr	r0, l2dis_3630
+	adr	r1, l2dis_3630_offset	@ address for offset
+	ldr	r0, [r1]		@ value for offset
+	ldr	r0, [r1, r0]		@ value at l2dis_3630
 	cmp	r0, #0x1	@ should we disable L2 on 3630?
 	bne	skipl2dis
 	mrc	p15, 0, r0, c1, c0, 1
@@ -449,12 +436,14 @@ skipl2dis:
 	and	r1, #0x700
 	cmp	r1, #0x300
 	beq	l2_inv_gp
+	adr	r0, l2_inv_api_params_offset
+	ldr	r3, [r0]
+	add	r3, r3, r0		@ r3 points to dummy parameters
 	mov	r0, #40			@ set service ID for PPA
 	mov	r12, r0			@ copy secure Service ID in r12
 	mov	r1, #0			@ set task id for ROM code in r1
 	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
-	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
 	dsb				@ data write barrier
 	dmb				@ data memory barrier
 	smc	#1			@ call SMI monitor (smi #1)
@@ -488,8 +477,8 @@ skipl2dis:
 	b	logic_l1_restore
 
 	.align
-l2_inv_api_params:
-	.word	0x1, 0x00
+l2_inv_api_params_offset:
+	.long	l2_inv_api_params - .
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1			@ set up to invalidate L2
@@ -506,7 +495,9 @@ l2_inv_gp:
 	mov	r12, #0x2
 	smc	#0			@ Call SMI monitor (smieq)
 logic_l1_restore:
-	ldr	r1, l2dis_3630
+	adr	r0, l2dis_3630_offset	@ adress for offset
+	ldr	r1, [r0]		@ value for offset
+	ldr	r1, [r0, r1]		@ value at l2dis_3630
 	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
 	bne	skipl2reen
 	mrc	p15, 0, r1, c1, c0, 1
@@ -535,9 +526,17 @@ control_stat:
 	.word	CONTROL_STAT
 control_mem_rta:
 	.word	CONTROL_MEM_RTA_CTRL
+l2dis_3630_offset:
+	.long	l2dis_3630 - .
+
+	.data
 l2dis_3630:
 	.word	0
 
+	.data
+l2_inv_api_params:
+	.word	0x1, 0x00
+
 /*
  * Internal functions
  */
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index ad1bb9431..c7a3b4aab 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -29,12 +29,6 @@
 	dsb
 .endm
 
-ppa_zero_params:
-	.word		0x0
-
-ppa_por_params:
-	.word		1, 0
-
 #ifdef CONFIG_ARCH_OMAP4
 
 /*
@@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume)
 	beq	skip_ns_smp_enable
 ppa_actrl_retry:
 	mov     r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
-	adr	r3, ppa_zero_params		@ Pointer to parameters
+	adr	r1, ppa_zero_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_zero_params
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
 	mov	r6, #0xff
@@ -303,7 +299,9 @@ skip_ns_smp_enable:
 	ldr     r0, =OMAP4_PPA_L2_POR_INDEX
 	ldr     r1, =OMAP44XX_SAR_RAM_BASE
 	ldr     r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
-	adr     r3, ppa_por_params
+	adr     r1, ppa_por_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_por_params
 	str     r4, [r3, #0x04]
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
@@ -328,19 +326,19 @@ skip_l2en:
 #endif
 
 	b	cpu_resume			@ Jump to generic resume
+ppa_por_params_offset:
+	.long	ppa_por_params - .
 ENDPROC(omap4_cpu_resume)
 #endif	/* CONFIG_ARCH_OMAP4 */
 
 #endif	/* defined(CONFIG_SMP) && defined(CONFIG_PM) */
 
-ENTRY(omap_bus_sync)
-	ret	lr
-ENDPROC(omap_bus_sync)
-
 ENTRY(omap_do_wfi)
 	stmfd	sp!, {lr}
+#ifdef CONFIG_OMAP_INTERCONNECT_BARRIER
 	/* Drain interconnect write buffers. */
-	bl omap_bus_sync
+	bl	omap_interconnect_sync
+#endif
 
 	/*
 	 * Execute an ISB instruction to ensure that all of the
@@ -382,4 +380,13 @@ ENTRY(omap_do_wfi)
 	nop
 
 	ldmfd	sp!, {pc}
+ppa_zero_params_offset:
+	.long	ppa_zero_params - .
 ENDPROC(omap_do_wfi)
+
+	.data
+ppa_zero_params:
+	.word		0
+
+ppa_por_params:
+	.word		1, 0
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index f97654d11..2aa01c270 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -39,82 +39,10 @@
 #include <linux/of.h>
 
 /*
- * Test if multicore OMAP support is needed
+ * OMAP2+ is always defined as ARCH_MULTIPLATFORM in Kconfig
  */
 #undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_MULTIPLATFORM
 #define MULTI_OMAP2
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap4
-# endif
-#endif
-
-#ifdef CONFIG_SOC_OMAP5
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap5
-# endif
-#endif
-
-#ifdef CONFIG_SOC_AM33XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME am33xx
-# endif
-#endif
-
-#ifdef CONFIG_SOC_AM43XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME am43xx
-# endif
-#endif
-
-#ifdef CONFIG_SOC_DRA7XX
-# ifdef OMAP_NAME
-#  undef MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME DRA7XX
-# endif
-#endif
 
 /*
  * Omap device type i.e. EMU/HS/TST/GP/BAD
@@ -129,9 +57,9 @@ int omap_type(void);
 
 /*
  * omap_rev bits:
- * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
- * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ * SoC id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * SoC revision	(See _REV_ defined in cpu.h)	[15:08]
+ * SoC class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
  */
 unsigned int omap_rev(void);
 
@@ -141,20 +69,20 @@ static inline int soc_is_omap(void)
 }
 
 /*
- * Get the CPU revision for OMAP devices
+ * Get the SoC revision for OMAP devices
  */
 #define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
 
 /*
  * Macros to group OMAP into cpu classes.
  * These can be used in most places.
- * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():	True for OMAP2430
- * cpu_is_omap343x():	True for OMAP3430
- * cpu_is_omap443x():	True for OMAP4430
- * cpu_is_omap446x():	True for OMAP4460
- * cpu_is_omap447x():	True for OMAP4470
+ * soc_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * soc_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * soc_is_omap243x():	True for OMAP2430
+ * soc_is_omap343x():	True for OMAP3430
+ * soc_is_omap443x():	True for OMAP4430
+ * soc_is_omap446x():	True for OMAP4460
+ * soc_is_omap447x():	True for OMAP4470
  * soc_is_omap543x():	True for OMAP5430, OMAP5432
  */
 #define GET_OMAP_CLASS	(omap_rev() & 0xff)
@@ -181,6 +109,14 @@ static inline int is_ti ##class (void)		\
 	return (GET_TI_CLASS == (id)) ? 1 : 0;	\
 }
 
+#define GET_DRA_CLASS	((omap_rev() >> 24) & 0xff)
+
+#define IS_DRA_CLASS(class, id)				\
+static inline int is_dra ##class (void)			\
+{							\
+	return (GET_DRA_CLASS == (id)) ? 1 : 0;		\
+}
+
 #define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
 
 #define IS_OMAP_SUBCLASS(subclass, id)			\
@@ -201,6 +137,12 @@ static inline int is_am ##subclass (void)		\
 	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
 }
 
+#define IS_DRA_SUBCLASS(subclass, id)			\
+static inline int is_dra ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
 IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
 IS_OMAP_CLASS(44xx, 0x44)
@@ -210,6 +152,7 @@ IS_AM_CLASS(33xx, 0x33)
 IS_AM_CLASS(43xx, 0x43)
 
 IS_TI_CLASS(81xx, 0x81)
+IS_DRA_CLASS(7xx, 0x7)
 
 IS_OMAP_SUBCLASS(242x, 0x242)
 IS_OMAP_SUBCLASS(243x, 0x243)
@@ -224,80 +167,58 @@ IS_TI_SUBCLASS(816x, 0x816)
 IS_TI_SUBCLASS(814x, 0x814)
 IS_AM_SUBCLASS(335x, 0x335)
 IS_AM_SUBCLASS(437x, 0x437)
+IS_DRA_SUBCLASS(75x, 0x75)
+IS_DRA_SUBCLASS(72x, 0x72)
 
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap242x()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap343x()		0
-#define cpu_is_ti81xx()			0
-#define cpu_is_ti816x()			0
-#define cpu_is_ti814x()			0
+#define soc_is_ti81xx()			0
+#define soc_is_ti816x()			0
+#define soc_is_ti814x()			0
 #define soc_is_am35xx()			0
 #define soc_is_am33xx()			0
 #define soc_is_am335x()			0
 #define soc_is_am43xx()			0
 #define soc_is_am437x()			0
-#define cpu_is_omap44xx()		0
-#define cpu_is_omap443x()		0
-#define cpu_is_omap446x()		0
-#define cpu_is_omap447x()		0
+#define soc_is_omap44xx()		0
+#define soc_is_omap443x()		0
+#define soc_is_omap446x()		0
+#define soc_is_omap447x()		0
 #define soc_is_omap54xx()		0
 #define soc_is_omap543x()		0
 #define soc_is_dra7xx()			0
 #define soc_is_dra74x()			0
 #define soc_is_dra72x()			0
 
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()		is_omap34xx()
-#  define cpu_is_omap343x()		is_omap343x()
-# endif
+#if defined(CONFIG_ARCH_OMAP2)
+# define soc_is_omap24xx()		is_omap24xx()
 #else
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()		1
-# endif
+# define soc_is_omap24xx()		0
+#endif
+#if defined(CONFIG_SOC_OMAP2420)
+# define soc_is_omap242x()		is_omap242x()
+#else
+# define soc_is_omap242x()		0
+#endif
+#if defined(CONFIG_SOC_OMAP2430)
+# define soc_is_omap243x()		is_omap243x()
+#else
+# define soc_is_omap243x()		0
+#endif
+#if defined(CONFIG_ARCH_OMAP3)
+# define soc_is_omap34xx()		is_omap34xx()
+# define soc_is_omap343x()		is_omap343x()
+#else
+# define soc_is_omap34xx()		0
+# define soc_is_omap343x()		0
 #endif
 
 /*
  * Macros to detect individual cpu types.
  * These are only rarely needed.
- * cpu_is_omap2420():	True for OMAP2420
- * cpu_is_omap2422():	True for OMAP2422
- * cpu_is_omap2423():	True for OMAP2423
- * cpu_is_omap2430():	True for OMAP2430
- * cpu_is_omap3430():	True for OMAP3430
+ * soc_is_omap2420():	True for OMAP2420
+ * soc_is_omap2422():	True for OMAP2422
+ * soc_is_omap2423():	True for OMAP2423
+ * soc_is_omap2430():	True for OMAP2430
+ * soc_is_omap3430():	True for OMAP3430
  */
 #define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
 
@@ -313,51 +234,49 @@ IS_OMAP_TYPE(2423, 0x2423)
 IS_OMAP_TYPE(2430, 0x2430)
 IS_OMAP_TYPE(3430, 0x3430)
 
-#define cpu_is_omap2420()		0
-#define cpu_is_omap2422()		0
-#define cpu_is_omap2423()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap3430()		0
-#define cpu_is_omap3630()		0
+#define soc_is_omap2420()		0
+#define soc_is_omap2422()		0
+#define soc_is_omap2423()		0
+#define soc_is_omap2430()		0
+#define soc_is_omap3430()		0
+#define soc_is_omap3630()		0
 #define soc_is_omap5430()		0
 
 /* These are needed for the common code */
-#ifdef CONFIG_ARCH_OMAP2PLUS
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
+#define soc_is_omap7xx()		0
+#define soc_is_omap15xx()		0
+#define soc_is_omap16xx()		0
+#define soc_is_omap1510()		0
+#define soc_is_omap1610()		0
+#define soc_is_omap1611()		0
+#define soc_is_omap1621()		0
+#define soc_is_omap1710()		0
 #define cpu_class_is_omap1()		0
 #define cpu_class_is_omap2()		1
-#endif
 
 #if defined(CONFIG_ARCH_OMAP2)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()		is_omap2420()
-# define cpu_is_omap2422()		is_omap2422()
-# define cpu_is_omap2423()		is_omap2423()
-# define cpu_is_omap2430()		is_omap2430()
+# undef  soc_is_omap2420
+# undef  soc_is_omap2422
+# undef  soc_is_omap2423
+# undef  soc_is_omap2430
+# define soc_is_omap2420()		is_omap2420()
+# define soc_is_omap2422()		is_omap2422()
+# define soc_is_omap2423()		is_omap2423()
+# define soc_is_omap2430()		is_omap2430()
 #endif
 
 #if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
+# undef soc_is_omap3430
+# undef soc_is_ti81xx
+# undef soc_is_ti816x
+# undef soc_is_ti814x
 # undef soc_is_am35xx
-# define cpu_is_omap3430()		is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630()		is_omap363x()
-# define cpu_is_ti81xx()		is_ti81xx()
-# define cpu_is_ti816x()		is_ti816x()
-# define cpu_is_ti814x()		is_ti814x()
+# define soc_is_omap3430()		is_omap3430()
+# undef soc_is_omap3630
+# define soc_is_omap3630()		is_omap363x()
+# define soc_is_ti81xx()		is_ti81xx()
+# define soc_is_ti816x()		is_ti816x()
+# define soc_is_ti814x()		is_ti814x()
 # define soc_is_am35xx()		is_am35xx()
 #endif
 
@@ -376,14 +295,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx()		is_omap44xx()
-# define cpu_is_omap443x()		is_omap443x()
-# define cpu_is_omap446x()		is_omap446x()
-# define cpu_is_omap447x()		is_omap447x()
+# undef soc_is_omap44xx
+# undef soc_is_omap443x
+# undef soc_is_omap446x
+# undef soc_is_omap447x
+# define soc_is_omap44xx()		is_omap44xx()
+# define soc_is_omap443x()		is_omap443x()
+# define soc_is_omap446x()		is_omap446x()
+# define soc_is_omap447x()		is_omap447x()
 # endif
 
 # if defined(CONFIG_SOC_OMAP5)
@@ -397,9 +316,9 @@ IS_OMAP_TYPE(3430, 0x3430)
 #undef soc_is_dra7xx
 #undef soc_is_dra74x
 #undef soc_is_dra72x
-#define soc_is_dra7xx()	(of_machine_is_compatible("ti,dra7"))
-#define soc_is_dra74x()	(of_machine_is_compatible("ti,dra74"))
-#define soc_is_dra72x()	(of_machine_is_compatible("ti,dra72"))
+#define soc_is_dra7xx()	is_dra7xx()
+#define soc_is_dra74x()	is_dra75x()
+#define soc_is_dra72x()	is_dra72x()
 #endif
 
 /* Various silicon revisions for omap2 */
@@ -469,7 +388,10 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define DRA7XX_CLASS		0x07000000
 #define DRA752_REV_ES1_0	(DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
 #define DRA752_REV_ES1_1	(DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
+#define DRA752_REV_ES2_0	(DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
 #define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
+#define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
+#define DRA722_REV_ES2_0	(DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
 
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);
@@ -554,5 +476,22 @@ level(__##fn);
 #define omap_late_initcall(fn)		omap_initcall(late_initcall, fn)
 #define omap_late_initcall_sync(fn)	omap_initcall(late_initcall_sync, fn)
 
-#endif	/* __ASSEMBLY__ */
+/* Legacy defines, these can be removed when users are removed */
+#define cpu_is_omap2420()	soc_is_omap2420()
+#define cpu_is_omap2422()	soc_is_omap2422()
+#define cpu_is_omap242x()	soc_is_omap242x()
+#define cpu_is_omap2430()	soc_is_omap2430()
+#define cpu_is_omap243x()	soc_is_omap243x()
+#define cpu_is_omap24xx()	soc_is_omap24xx()
+#define cpu_is_omap3430()	soc_is_omap3430()
+#define cpu_is_omap343x()	soc_is_omap343x()
+#define cpu_is_omap34xx()	soc_is_omap34xx()
+#define cpu_is_omap3630()	soc_is_omap3630()
+#define cpu_is_omap443x()	soc_is_omap443x()
+#define cpu_is_omap446x()	soc_is_omap446x()
+#define cpu_is_omap44xx()	soc_is_omap44xx()
+#define cpu_is_ti814x()		soc_is_ti814x()
+#define cpu_is_ti816x()		soc_is_ti816x()
+#define cpu_is_ti81xx()		soc_is_ti81xx()
 
+#endif	/* __ASSEMBLY__ */
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
index cd488b80b..83d0e61f4 100644
--- a/arch/arm/mach-omap2/sram.c
+++ b/arch/arm/mach-omap2/sram.c
@@ -211,35 +211,10 @@ static inline int omap243x_sram_init(void)
 
 #ifdef CONFIG_ARCH_OMAP3
 
-static u32 (*_omap3_sram_configure_core_dpll)(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
-	BUG_ON(!_omap3_sram_configure_core_dpll);
-	return _omap3_sram_configure_core_dpll(
-			m2, unlock_dll, f, inc,
-			sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
-			sdrc_actim_ctrl_b_0, sdrc_mr_0,
-			sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
-			sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
 void omap3_sram_restore_context(void)
 {
 	omap_sram_reset();
 
-	_omap3_sram_configure_core_dpll =
-		omap_sram_push(omap3_sram_configure_core_dpll,
-			       omap3_sram_configure_core_dpll_sz);
 	omap_push_sram_idle();
 }
 
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
index 948d3edef..18dc88426 100644
--- a/arch/arm/mach-omap2/sram.h
+++ b/arch/arm/mach-omap2/sram.h
@@ -15,12 +15,6 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 				      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
-extern u32 omap3_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 extern void omap3_sram_restore_context(void);
 
 /* Do not use these */
@@ -52,14 +46,6 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 						u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
-extern u32 omap3_sram_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
 #ifdef CONFIG_PM
 extern void omap_push_sram_idle(void);
 #else
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
deleted file mode 100644
index 1446331b5..000000000
--- a/arch/arm/mach-omap2/sram34xx.S
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * linux/arch/arm/mach-omap3/sram.S
- *
- * Omap3 specific functions that need to be run in internal SRAM
- *
- * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
- *
- * Rajendra Nayak <rnayak@ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "sdrc.h"
-#include "cm3xxx.h"
-
-/*
- * This file needs be built unconditionally as ARM to interoperate correctly
- * with non-Thumb-2-capable firmware.
- */
-	.arm
-
-	.text
-
-/* r1 parameters */
-#define SDRC_NO_UNLOCK_DLL		0x0
-#define SDRC_UNLOCK_DLL			0x1
-
-/* SDRC_DLLA_CTRL bit settings */
-#define FIXEDDELAY_SHIFT		24
-#define FIXEDDELAY_MASK			(0xff << FIXEDDELAY_SHIFT)
-#define DLLIDLE_MASK			0x4
-
-/*
- * SDRC_DLLA_CTRL default values: TI hardware team indicates that
- * FIXEDDELAY should be initialized to 0xf.  This apparently was
- * empirically determined during process testing, so no derivation
- * was provided.
- */
-#define FIXEDDELAY_DEFAULT		(0x0f << FIXEDDELAY_SHIFT)
-
-/* SDRC_DLLA_STATUS bit settings */
-#define LOCKSTATUS_MASK			0x4
-
-/* SDRC_POWER bit settings */
-#define SRFRONIDLEREQ_MASK		0x40
-
-/* CM_IDLEST1_CORE bit settings */
-#define ST_SDRC_MASK			0x2
-
-/* CM_ICLKEN1_CORE bit settings */
-#define EN_SDRC_MASK			0x2
-
-/* CM_CLKSEL1_PLL bit settings */
-#define CORE_DPLL_CLKOUT_DIV_SHIFT	0x1b
-
-/*
- * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- *
- * Params passed in registers:
- *  r0 = new M2 divider setting (only 1 and 2 supported right now)
- *  r1 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
- *      SDRC rates < 83MHz
- *  r2 = number of MPU cycles to wait for SDRC to stabilize after
- *      reprogramming the SDRC when switching to a slower MPU speed
- *  r3 = increasing SDRC rate? (1 = yes, 0 = no)
- *
- * Params passed via the stack. The needed params will be copied in SRAM
- *  before use by the code in SRAM (SDRAM is not accessible during SDRC
- *  reconfiguration):
- *  new SDRC_RFR_CTRL_0 register contents
- *  new SDRC_ACTIM_CTRL_A_0 register contents
- *  new SDRC_ACTIM_CTRL_B_0 register contents
- *  new SDRC_MR_0 register value
- *  new SDRC_RFR_CTRL_1 register contents
- *  new SDRC_ACTIM_CTRL_A_1 register contents
- *  new SDRC_ACTIM_CTRL_B_1 register contents
- *  new SDRC_MR_1 register value
- *
- * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
- * the SDRC CS1 registers
- *
- * NOTE: This code no longer attempts to program the SDRC AC timing and MR
- * registers.  This is because the code currently cannot ensure that all
- * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
- * SDRAM when the registers are written.  If the registers are changed while
- * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
- * may enter an unpredictable state.  In the future, the intent is to
- * re-enable this code in cases where we can ensure that no initiators are
- * touching the SDRAM.  Until that time, users who know that their use case
- * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
- * option.
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible.  Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
-	.align	3
-ENTRY(omap3_sram_configure_core_dpll)
-	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
-
-					@ pull the extra args off the stack
-					@  and store them in SRAM
-
-/*
- * PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour
- * in Thumb-2: use a r7 as a base instead.
- * Be careful not to clobber r7 when maintaing this file.
- */
- THUMB(	adr	r7, omap3_sram_configure_core_dpll			)
-	.macro strtext Rt:req, label:req
- ARM(	str	\Rt, \label						)
- THUMB(	str	\Rt, [r7, \label - omap3_sram_configure_core_dpll]	)
-	.endm
-
-	ldr	r4, [sp, #52]
-	strtext	r4, omap_sdrc_rfr_ctrl_0_val
-	ldr	r4, [sp, #56]
-	strtext	r4, omap_sdrc_actim_ctrl_a_0_val
-	ldr	r4, [sp, #60]
-	strtext	r4, omap_sdrc_actim_ctrl_b_0_val
-	ldr	r4, [sp, #64]
-	strtext	r4, omap_sdrc_mr_0_val
-	ldr	r4, [sp, #68]
-	strtext	r4, omap_sdrc_rfr_ctrl_1_val
-	cmp	r4, #0			@ if SDRC_RFR_CTRL_1 is 0,
-	beq	skip_cs1_params		@  do not use cs1 params
-	ldr	r4, [sp, #72]
-	strtext	r4, omap_sdrc_actim_ctrl_a_1_val
-	ldr	r4, [sp, #76]
-	strtext	r4, omap_sdrc_actim_ctrl_b_1_val
-	ldr	r4, [sp, #80]
-	strtext	r4, omap_sdrc_mr_1_val
-skip_cs1_params:
-	mrc	p15, 0, r8, c1, c0, 0	@ read ctrl register
-	bic	r10, r8, #0x800		@ clear Z-bit, disable branch prediction
-	mcr	p15, 0, r10, c1, c0, 0	@ write ctrl register
-	dsb				@ flush buffered writes to interconnect
-	isb				@ prevent speculative exec past here
-	cmp	r3, #1			@ if increasing SDRC clk rate,
-	bleq	configure_sdrc		@ program the SDRC regs early (for RFR)
-	cmp	r1, #SDRC_UNLOCK_DLL	@ set the intended DLL state
-	bleq	unlock_dll
-	blne	lock_dll
-	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
-	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
-	mov	r12, r2
-	bl	wait_clk_stable		@ wait for SDRC to stabilize
-	bl	enable_sdrc		@ take SDRC out of idle
-	cmp	r1, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
-	bleq	wait_dll_unlock
-	blne	wait_dll_lock
-	cmp	r3, #1			@ if increasing SDRC clk rate,
-	beq	return_to_sdram		@ return to SDRAM code, otherwise,
-	bl	configure_sdrc		@ reprogram SDRC regs now
-return_to_sdram:
-	mcr	p15, 0, r8, c1, c0, 0	@ restore ctrl register
-	isb				@ prevent speculative exec past here
-	mov 	r0, #0 			@ return value
-	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
-unlock_dll:
-	ldr	r11, omap3_sdrc_dlla_ctrl
-	ldr	r12, [r11]
-	bic	r12, r12, #FIXEDDELAY_MASK
-	orr	r12, r12, #FIXEDDELAY_DEFAULT
-	orr	r12, r12, #DLLIDLE_MASK
-	str	r12, [r11]		@ (no OCP barrier needed)
-	bx	lr
-lock_dll:
-	ldr	r11, omap3_sdrc_dlla_ctrl
-	ldr	r12, [r11]
-	bic	r12, r12, #DLLIDLE_MASK
-	str	r12, [r11]		@ (no OCP barrier needed)
-	bx	lr
-sdram_in_selfrefresh:
-	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
-	ldr	r12, [r11]		@ read the contents of SDRC_POWER
-	mov	r9, r12			@ keep a copy of SDRC_POWER bits
-	orr 	r12, r12, #SRFRONIDLEREQ_MASK	@ enable self refresh on idle
-	str 	r12, [r11]		@ write back to SDRC_POWER register
-	ldr	r12, [r11]		@ posted-write barrier for SDRC
-idle_sdrc:
-	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
-	ldr	r12, [r11]
-	bic	r12, r12, #EN_SDRC_MASK		@ disable iclk bit for SDRC
-	str 	r12, [r11]
-wait_sdrc_idle:
-	ldr 	r11, omap3_cm_idlest1_core
-	ldr 	r12, [r11]
-	and 	r12, r12, #ST_SDRC_MASK		@ check for SDRC idle
-	cmp 	r12, #ST_SDRC_MASK
-	bne 	wait_sdrc_idle
-	bx 	lr
-configure_core_dpll:
-	ldr 	r11, omap3_cm_clksel1_pll
-	ldr	r12, [r11]
-	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
-	and	r12, r12, r10
-	orr	r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
-	str	r12, [r11]
-	ldr	r12, [r11]		@ posted-write barrier for CM
-	bx	lr
-wait_clk_stable:
-	subs 	r12, r12, #1
-	bne	wait_clk_stable
-	bx	lr
-enable_sdrc:
-	ldr 	r11, omap3_cm_iclken1_core
-	ldr	r12, [r11]
-	orr 	r12, r12, #EN_SDRC_MASK		@ enable iclk bit for SDRC
-	str 	r12, [r11]
-wait_sdrc_idle1:
-	ldr 	r11, omap3_cm_idlest1_core
-	ldr	r12, [r11]
-	and 	r12, r12, #ST_SDRC_MASK
-	cmp	r12, #0
-	bne	wait_sdrc_idle1
-restore_sdrc_power_val:
-	ldr	r11, omap3_sdrc_power
-	str	r9, [r11]		@ restore SDRC_POWER, no barrier needed
-	bx	lr
-wait_dll_lock:
-	ldr	r11, omap3_sdrc_dlla_status
-	ldr	r12, [r11]
-	and 	r12, r12, #LOCKSTATUS_MASK
-	cmp	r12, #LOCKSTATUS_MASK
-	bne	wait_dll_lock
-	bx	lr
-wait_dll_unlock:
-	ldr	r11, omap3_sdrc_dlla_status
-	ldr	r12, [r11]
-	and	r12, r12, #LOCKSTATUS_MASK
-	cmp	r12, #0x0
-	bne	wait_dll_unlock
-	bx	lr
-configure_sdrc:
-	ldr	r12, omap_sdrc_rfr_ctrl_0_val	@ fetch value from SRAM
-	ldr	r11, omap3_sdrc_rfr_ctrl_0	@ fetch addr from SRAM
-	str	r12, [r11]			@ store
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
-	ldr	r12, omap_sdrc_actim_ctrl_a_0_val
-	ldr	r11, omap3_sdrc_actim_ctrl_a_0
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_actim_ctrl_b_0_val
-	ldr	r11, omap3_sdrc_actim_ctrl_b_0
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_mr_0_val
-	ldr	r11, omap3_sdrc_mr_0
-	str	r12, [r11]
-#endif
-	ldr	r12, omap_sdrc_rfr_ctrl_1_val
-	cmp	r12, #0			@ if SDRC_RFR_CTRL_1 is 0,
-	beq	skip_cs1_prog		@  do not program cs1 params
-	ldr	r11, omap3_sdrc_rfr_ctrl_1
-	str	r12, [r11]
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
-	ldr	r12, omap_sdrc_actim_ctrl_a_1_val
-	ldr	r11, omap3_sdrc_actim_ctrl_a_1
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_actim_ctrl_b_1_val
-	ldr	r11, omap3_sdrc_actim_ctrl_b_1
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_mr_1_val
-	ldr	r11, omap3_sdrc_mr_1
-	str	r12, [r11]
-#endif
-skip_cs1_prog:
-	ldr	r12, [r11]		@ posted-write barrier for SDRC
-	bx	lr
-
-	.align
-omap3_sdrc_power:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
-omap3_cm_clksel1_pll:
-	.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap3_cm_idlest1_core:
-	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
-omap3_cm_iclken1_core:
-	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-
-omap3_sdrc_rfr_ctrl_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_rfr_ctrl_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
-omap3_sdrc_actim_ctrl_a_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrl_a_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
-omap3_sdrc_actim_ctrl_b_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
-omap3_sdrc_actim_ctrl_b_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
-omap3_sdrc_mr_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
-omap3_sdrc_mr_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
-omap_sdrc_rfr_ctrl_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_rfr_ctrl_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_mr_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_mr_1_val:
-	.word 0xDEADBEEF
-
-omap3_sdrc_dlla_status:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
-omap3_sdrc_dlla_ctrl:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
-core_m2_mask_val:
-	.word 0x07FFFFFF
-ENDPROC(omap3_sram_configure_core_dpll)
-
-ENTRY(omap3_sram_configure_core_dpll_sz)
-	.word	. - omap3_sram_configure_core_dpll
-
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index cac46d852..5e2e2218a 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -102,38 +102,38 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
+static int omap2_gp_timer_shutdown(struct clock_event_device *evt)
+{
+	__omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
+	return 0;
+}
+
+static int omap2_gp_timer_set_periodic(struct clock_event_device *evt)
 {
 	u32 period;
 
 	__omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		period = clkev.rate / HZ;
-		period -= 1;
-		/* Looks like we need to first set the load value separately */
-		__omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG,
-				      0xffffffff - period, OMAP_TIMER_POSTED);
-		__omap_dm_timer_load_start(&clkev,
-					OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
-					0xffffffff - period, OMAP_TIMER_POSTED);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	period = clkev.rate / HZ;
+	period -= 1;
+	/* Looks like we need to first set the load value separately */
+	__omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, 0xffffffff - period,
+			      OMAP_TIMER_POSTED);
+	__omap_dm_timer_load_start(&clkev,
+				   OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
+				   0xffffffff - period, OMAP_TIMER_POSTED);
+	return 0;
 }
 
 static struct clock_event_device clockevent_gpt = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 300,
-	.set_next_event	= omap2_gp_timer_set_next_event,
-	.set_mode	= omap2_gp_timer_set_mode,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 300,
+	.set_next_event		= omap2_gp_timer_set_next_event,
+	.set_state_shutdown	= omap2_gp_timer_shutdown,
+	.set_state_periodic	= omap2_gp_timer_set_periodic,
+	.set_state_oneshot	= omap2_gp_timer_shutdown,
+	.tick_resume		= omap2_gp_timer_shutdown,
 };
 
 static struct property device_disabled = {
@@ -183,7 +183,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
 				  of_get_property(np, "ti,timer-secure", NULL)))
 			continue;
 
-		of_add_property(np, &device_disabled);
+		if (!of_device_is_compatible(np, "ti,omap-counter32k"))
+			of_add_property(np, &device_disabled);
 		return np;
 	}
 
@@ -193,8 +194,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
 /**
  * omap_dmtimer_init - initialisation function when device tree is used
  *
- * For secure OMAP3 devices, timers with device type "timer-secure" cannot
- * be used by the kernel as they are reserved. Therefore, to prevent the
+ * For secure OMAP3/DRA7xx devices, timers with device type "timer-secure"
+ * cannot be used by the kernel as they are reserved. Therefore, to prevent the
  * kernel registering these devices remove them dynamically from the device
  * tree on boot.
  */
@@ -202,14 +203,13 @@ static void __init omap_dmtimer_init(void)
 {
 	struct device_node *np;
 
-	if (!cpu_is_omap34xx())
+	if (!cpu_is_omap34xx() && !soc_is_dra7xx())
 		return;
 
 	/* If we are a secure device, remove any secure timer nodes */
 	if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) {
 		np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure");
-		if (np)
-			of_node_put(np);
+		of_node_put(np);
 	}
 }
 
@@ -289,6 +289,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (!timer->io_base)
 		return -ENXIO;
 
+	omap_hwmod_setup_one(oh_name);
+
 	/* After the dmtimer is using hwmod these clocks won't be needed */
 	timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
 	if (IS_ERR(timer->fclk))
@@ -298,16 +300,11 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (IS_ERR(src))
 		return PTR_ERR(src);
 
-	r = clk_set_parent(timer->fclk, src);
-	if (r < 0) {
-		pr_warn("%s: %s cannot set source\n", __func__, oh->name);
-		clk_put(src);
-		return r;
-	}
+	WARN(clk_set_parent(timer->fclk, src) < 0,
+	     "Cannot set timer parent clock, no PLL clock driver?");
 
 	clk_put(src);
 
-	omap_hwmod_setup_one(oh_name);
 	omap_hwmod_enable(oh);
 	__omap_dm_timer_init_regs(timer);
 
@@ -324,6 +321,12 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	return r;
 }
 
+#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+void tick_broadcast(const struct cpumask *mask)
+{
+}
+#endif
+
 static void __init omap2_gp_clockevent_init(int gptimer_id,
 						const char *fck_source,
 						const char *property)
@@ -399,7 +402,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
 	int ret;
 	struct device_node *np = NULL;
 	struct omap_hwmod *oh;
-	void __iomem *vbase;
 	const char *oh_name = "counter_32k";
 
 	/*
@@ -425,18 +427,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
 
 	omap_hwmod_setup_one(oh_name);
 
-	if (np) {
-		vbase = of_iomap(np, 0);
-		of_node_put(np);
-	} else {
-		vbase = omap_hwmod_get_mpu_rt_va(oh);
-	}
-
-	if (!vbase) {
-		pr_warn("%s: failed to get counter_32k resource\n", __func__);
-		return -ENXIO;
-	}
-
 	ret = omap_hwmod_enable(oh);
 	if (ret) {
 		pr_warn("%s: failed to enable counter_32k module (%d)\n",
@@ -444,13 +434,18 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
 		return ret;
 	}
 
-	ret = omap_init_clocksource_32k(vbase);
-	if (ret) {
-		pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
-							__func__, ret);
-		omap_hwmod_idle(oh);
-	}
+	if (!of_have_populated_dt()) {
+		void __iomem *vbase;
+
+		vbase = omap_hwmod_get_mpu_rt_va(oh);
 
+		ret = omap_init_clocksource_32k(vbase);
+		if (ret) {
+			pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
+					__func__, ret);
+			omap_hwmod_idle(oh);
+		}
+	}
 	return ret;
 }
 
@@ -481,7 +476,67 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 			clocksource_gpt.name, clksrc.rate);
 }
 
-#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
+static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src,
+		const char *clkev_prop, int clksrc_nr, const char *clksrc_src,
+		const char *clksrc_prop, bool gptimer)
+{
+	omap_clk_init();
+	omap_dmtimer_init();
+	omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop);
+
+	/* Enable the use of clocksource="gp_timer" kernel parameter */
+	if (use_gptimer_clksrc || gptimer)
+		omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src,
+						clksrc_prop);
+	else
+		omap2_sync32k_clocksource_init();
+}
+
+void __init omap_init_time(void)
+{
+	__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
+			2, "timer_sys_ck", NULL, false);
+
+	clocksource_probe();
+}
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
+void __init omap3_secure_sync32k_timer_init(void)
+{
+	__omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
+			2, "timer_sys_ck", NULL, false);
+
+	clocksource_probe();
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+void __init omap3_gptimer_timer_init(void)
+{
+	__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
+			1, "timer_sys_ck", "ti,timer-alwon", true);
+
+	clocksource_probe();
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) ||		\
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
+static void __init omap4_sync32k_timer_init(void)
+{
+	__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
+			2, "sys_clkin_ck", NULL, false);
+}
+
+void __init omap4_local_timer_init(void)
+{
+	omap4_sync32k_timer_init();
+	clocksource_probe();
+}
+#endif
+
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
+
 /*
  * The realtime counter also called master counter, is a free-running
  * counter, which is related to real time. It produces the count used
@@ -493,6 +548,7 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
  */
 static void __init realtime_counter_init(void)
 {
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 	void __iomem *base;
 	static struct clk *sys_clk;
 	unsigned long rate;
@@ -591,97 +647,15 @@ sysclk1_based:
 	set_cntfreq();
 
 	iounmap(base);
-}
-#else
-static inline void __init realtime_counter_init(void)
-{}
 #endif
-
-#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
-			       clksrc_nr, clksrc_src, clksrc_prop)	\
-void __init omap##name##_gptimer_timer_init(void)			\
-{									\
-	omap_clk_init();					\
-	omap_dmtimer_init();						\
-	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
-	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src,		\
-					clksrc_prop);			\
 }
 
-#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
-				clksrc_nr, clksrc_src, clksrc_prop)	\
-void __init omap##name##_sync32k_timer_init(void)		\
-{									\
-	omap_clk_init();					\
-	omap_dmtimer_init();						\
-	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
-	/* Enable the use of clocksource="gp_timer" kernel parameter */	\
-	if (use_gptimer_clksrc)						\
-		omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src,	\
-						clksrc_prop);		\
-	else								\
-		omap2_sync32k_clocksource_init();			\
-}
-
-#ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon",
-			2, "timer_sys_ck", NULL);
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
-OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon",
-			2, "timer_sys_ck", NULL);
-OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
-			2, "timer_sys_ck", NULL);
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
-	defined(CONFIG_SOC_AM43XX)
-OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
-		       1, "timer_sys_ck", "ti,timer-alwon");
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
-	defined(CONFIG_SOC_DRA7XX)
-static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
-			       2, "sys_clkin_ck", NULL);
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
-void __init omap4_local_timer_init(void)
-{
-	omap4_sync32k_timer_init();
-	/* Local timers are not supprted on OMAP4430 ES1.0 */
-	if (omap_rev() != OMAP4430_REV_ES1_0) {
-		int err;
-
-		if (of_have_populated_dt()) {
-			clocksource_of_init();
-			return;
-		}
-
-		err = twd_local_timer_register(&twd_local_timer);
-		if (err)
-			pr_err("twd_local_timer_register failed %d\n", err);
-	}
-}
-#else
-void __init omap4_local_timer_init(void)
-{
-	omap4_sync32k_timer_init();
-}
-#endif /* CONFIG_HAVE_ARM_TWD */
-#endif /* CONFIG_ARCH_OMAP4 */
-
-#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
 void __init omap5_realtime_timer_init(void)
 {
 	omap4_sync32k_timer_init();
 	realtime_counter_init();
 
-	clocksource_of_init();
+	clocksource_probe();
 }
 #endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
 
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 076fd20d7..2028167ff 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -280,10 +280,6 @@ void omap3_vc_set_pmic_signaling(int core_next_state)
 	}
 }
 
-#define PRM_POLCTRL_TWL_MASK	(OMAP3430_PRM_POLCTRL_CLKREQ_POL | \
-					OMAP3430_PRM_POLCTRL_CLKREQ_POL)
-#define PRM_POLCTRL_TWL_VAL	OMAP3430_PRM_POLCTRL_CLKREQ_POL
-
 /*
  * Configure signal polarity for sys_clkreq and sys_off_mode pins
  * as the default values are wrong and can cause the system to hang
@@ -300,7 +296,7 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
 
 	val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET);
 	if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) ||
-	    (val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) {
+	    (val & OMAP3430_PRM_POLCTRL_OFFMODE_POL)) {
 		val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL;
 		val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL;
 		pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n",
@@ -563,7 +559,7 @@ struct i2c_init_data {
 	u8 hsscll_12;
 };
 
-static const __initdata struct i2c_init_data omap4_i2c_timing_data[] = {
+static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = {
 	{
 		.load = 50,
 		.loadbits = 0x3,
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index 261bb7cb4..307676d8c 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -95,7 +95,7 @@ static struct voltagedomain *voltagedomains_am35xx[] __initdata = {
 };
 
 
-static const char *sys_clk_name __initdata = "sys_ck";
+static const char *const sys_clk_name __initconst = "sys_ck";
 
 void __init omap3xxx_voltagedomains_init(void)
 {
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index 48b22a0a0..9b1f245b5 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -92,7 +92,7 @@ static struct voltagedomain *voltagedomains_omap4[] __initdata = {
 	NULL,
 };
 
-static const char *sys_clk_name __initdata = "sys_clkin_ck";
+static const char *const sys_clk_name __initconst = "sys_clkin_ck";
 
 void __init omap44xx_voltagedomains_init(void)
 {
diff --git a/arch/arm/mach-omap2/voltagedomains54xx_data.c b/arch/arm/mach-omap2/voltagedomains54xx_data.c
index 33d22b872..af5ff6496 100644
--- a/arch/arm/mach-omap2/voltagedomains54xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains54xx_data.c
@@ -78,7 +78,7 @@ static struct voltagedomain *voltagedomains_omap5[] __initdata = {
 	NULL,
 };
 
-static const char *sys_clk_name __initdata = "sys_clkin";
+static const char *const sys_clk_name __initconst = "sys_clkin";
 
 void __init omap54xx_voltagedomains_init(void)
 {
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2412efb6c..89bb0fc79 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -1,6 +1,18 @@
-if ARCH_ORION5X
+menuconfig ARCH_ORION5X
+	bool "Marvell Orion"
+	depends on MMU && ARCH_MULTI_V5
+	select CPU_FEROCEON
+	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
+	select MVEBU_MBUS
+	select PCI
+	select PLAT_ORION_LEGACY
+	help
+	  Support for the following Marvell Orion 5x series SoCs:
+	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+	  Orion-2 (5281), Orion-1-90 (6183).
 
-menu "Orion Implementations"
+if ARCH_ORION5X
 
 config ARCH_ORION5X_DT
 	bool "Marvell Orion5x Flattened Device Tree"
@@ -16,14 +28,14 @@ config ARCH_ORION5X_DT
 
 config MACH_DB88F5281
 	bool "Marvell Orion-2 Development Board"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-2 (88F5281) Development Board
 
 config MACH_RD88F5182
 	bool "Marvell Orion-NAS Reference Design"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-NAS (88F5182) RD2
@@ -31,27 +43,29 @@ config MACH_RD88F5182
 config MACH_RD88F5182_DT
 	bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
 	select ARCH_ORION5X_DT
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the Marvell
 	  Orion-NAS (88F5182) RD2, Flattened Device Tree.
 
 config MACH_KUROBOX_PRO
 	bool "KuroBox Pro"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  KuroBox Pro platform.
 
 config MACH_DNS323
 	bool "D-Link DNS-323"
-	select I2C_BOARDINFO
+	select GENERIC_NET_UTILS
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
 
 config MACH_TS209
 	bool "QNAP TS-109/TS-209"
+	select GENERIC_NET_UTILS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-109/TS-209 platform.
@@ -64,7 +78,7 @@ config MACH_TERASTATION_PRO2
 
 config MACH_LINKSTATION_PRO
 	bool "Buffalo Linkstation Pro/Live"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Pro/Live platform. Both v1 and
@@ -72,27 +86,28 @@ config MACH_LINKSTATION_PRO
 
 config MACH_LINKSTATION_LSCHL
 	bool "Buffalo Linkstation Live v3 (LS-CHL)"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Live v3 (LS-CHL) platform.
 
 config MACH_LINKSTATION_MINI
-	bool "Buffalo Linkstation Mini"
-	select I2C_BOARDINFO
+	bool "Buffalo Linkstation Mini (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation Mini platform.
+	  Buffalo Linkstation Mini (LS-WSGL) platform.
 
 config MACH_LINKSTATION_LS_HGL
 	bool "Buffalo Linkstation LS-HGL"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation LS-HGL platform.
 
 config MACH_TS409
 	bool "QNAP TS-409"
+	select GENERIC_NET_UTILS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-409 platform.
@@ -124,7 +139,7 @@ config MACH_D2NET_DT
 
 config MACH_NET2BIG
 	bool "LaCie 2Big Network"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 2Big Network NAS.
@@ -160,6 +175,4 @@ config MACH_RD88F6183AP_GE
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-1-90 (88F6183) AP GE RD.
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index a40b5c9a5..4b2502b4c 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,10 +1,11 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o pci.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot
deleted file mode 100644
index 760a0efe7..000000000
--- a/arch/arm/mach-orion5x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
index 8a7284124..a89376a5c 100644
--- a/arch/arm/mach-orion5x/board-d2net.c
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -20,9 +20,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * LaCie d2 Network Info
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index 79f033b1d..3d36f1d95 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -16,15 +16,14 @@
 #include <linux/of_platform.h>
 #include <linux/cpu.h>
 #include <linux/mbus.h>
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <asm/system_misc.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include <plat/time.h>
+#include "orion5x.h"
+#include "bridge-regs.h"
 #include "common.h"
 
 static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
@@ -64,8 +63,7 @@ static void __init orion5x_dt_init(void)
 	if (of_machine_is_compatible("maxtor,shared-storage-2"))
 		mss2_init();
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     orion5x_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
 }
 
 static const char *orion5x_dt_compat[] = {
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index 66f9c3ba8..79202fd62 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -17,8 +17,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
+#include "orion5x.h"
+#include "bridge-regs.h"
 #include "common.h"
 
 /*****************************************************************************
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
index 270824b0e..b7b0f52f4 100644
--- a/arch/arm/mach-orion5x/board-rd88f5182.c
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -18,8 +18,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5182 Info
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/bridge-regs.h
index 5766e3fbf..305598eaa 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/bridge-regs.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-orion5x/include/mach/bridge-regs.h
- *
  * Orion CPU Bridge Registers
  *
  * This file is licensed under the terms of the GNU General Public
@@ -11,7 +9,7 @@
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
 
-#include <mach/orion5x.h>
+#include "orion5x.h"
 
 #define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE + 0x100)
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 6bbb7b55c..058994e99 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -27,14 +27,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/bridge-regs.h>
-#include <mach/hardware.h>
-#include <mach/orion5x.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/time.h>
 #include <plat/common.h>
+
+#include "bridge-regs.h"
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * I/O Address Mapping
@@ -66,8 +66,7 @@ static struct clk *tclk;
 
 void __init clk_init(void)
 {
-	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       orion5x_tclk);
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, orion5x_tclk);
 
 	orion_clkdev_init(tclk);
 }
@@ -184,9 +183,21 @@ static void __init orion5x_crypto_init(void)
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
+static struct resource orion_wdt_resource[] = {
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
+
+static struct platform_device orion_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
+	.resource	= orion_wdt_resource,
+};
+
 static void __init orion5x_wdt_init(void)
 {
-	orion_wdt_init();
+	platform_device_register(&orion_wdt_device);
 }
 
 
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index dc01c4ffc..12f74b46e 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -23,10 +23,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * DB-88F5281 on board devices
@@ -369,6 +369,7 @@ static void __init db88f5281_init(void)
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= db88f5281_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 09d2a2698..cd483bfb5 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -33,8 +33,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <asm/system_info.h>
-#include <mach/orion5x.h>
 #include <plat/orion-gpio.h>
+#include "orion5x.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -173,42 +173,10 @@ static struct mv643xx_eth_platform_data dns323_eth_data = {
 	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
 };
 
-/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
- * functions be kept somewhere?
- */
-static int __init dns323_parse_hex_nibble(char n)
-{
-	if (n >= '0' && n <= '9')
-		return n - '0';
-
-	if (n >= 'A' && n <= 'F')
-		return n - 'A' + 10;
-
-	if (n >= 'a' && n <= 'f')
-		return n - 'a' + 10;
-
-	return -1;
-}
-
-static int __init dns323_parse_hex_byte(const char *b)
-{
-	int hi;
-	int lo;
-
-	hi = dns323_parse_hex_nibble(b[0]);
-	lo = dns323_parse_hex_nibble(b[1]);
-
-	if (hi < 0 || lo < 0)
-		return -1;
-
-	return (hi << 4) | lo;
-}
-
 static int __init dns323_read_mac_addr(void)
 {
 	u_int8_t addr[6];
-	int i;
-	char *mac_page;
+	void __iomem *mac_page;
 
 	/* MAC address is stored as a regular ol' string in /dev/mtdblock4
 	 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
@@ -217,28 +185,11 @@ static int __init dns323_read_mac_addr(void)
 	if (!mac_page)
 		return -ENOMEM;
 
-	/* Sanity check the string we're looking at */
-	for (i = 0; i < 5; i++) {
-		if (*(mac_page + (i * 3) + 2) != ':') {
-			goto error_fail;
-		}
-	}
-
-	for (i = 0; i < 6; i++)	{
-		int byte;
-
-		byte = dns323_parse_hex_byte(mac_page + (i * 3));
-		if (byte < 0) {
-			goto error_fail;
-		}
-
-		addr[i] = byte;
-	}
+	if (!mac_pton((__force const char *) mac_page, addr))
+		goto error_fail;
 
 	iounmap(mac_page);
-	printk("DNS-323: Found ethernet MAC address: ");
-	for (i = 0; i < 6; i++)
-		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+	printk("DNS-323: Found ethernet MAC address: %pM\n", addr);
 
 	memcpy(dns323_eth_data.mac_addr, addr, 6);
 
@@ -715,6 +666,7 @@ static void __init dns323_init(void)
 MACHINE_START(DNS323, "D-Link DNS-323")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= dns323_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
deleted file mode 100644
index 79eb502a1..000000000
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MAIN_IRQ_CAUSE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #0]		@ main cause
-	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
-	mov	\irqnr, #0			@ default irqnr
-	@ find cause bits that are unmasked
-	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
-	clzne	\irqnr,	\irqstat		@ calc irqnr
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h
deleted file mode 100644
index 395735482..000000000
--- a/arch/arm/mach-orion5x/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "orion5x.h"
-
-#endif
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
deleted file mode 100644
index abd26b542..000000000
--- a/arch/arm/mach-orion5x/include/mach/uncompress.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/uncompress.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/orion5x.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 086ecb87d..ac4af2283 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -13,10 +13,10 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
 #include <asm/exception.h>
+#include "bridge-regs.h"
 #include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
@@ -26,15 +26,7 @@ static int __initdata gpio0_irqs[4] = {
 	IRQ_ORION5X_GPIO_24_31,
 };
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
-asmlinkage void
+static asmlinkage void
 __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
 {
 	u32 stat;
@@ -47,15 +39,12 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
 		return;
 	}
 }
-#endif
 
 void __init orion5x_init_irq(void)
 {
 	orion_irq_init(1, MAIN_IRQ_MASK);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(orion5x_legacy_handle_irq);
-#endif
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.
diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/irqs.h
index 2431d9923..506c8e0b3 100644
--- a/arch/arm/mach-orion5x/include/mach/irqs.h
+++ b/arch/arm/mach-orion5x/irqs.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-orion5x/include/mach/irqs.h
- *
  * IRQ definitions for Orion SoC
  *
  *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
@@ -54,7 +52,7 @@
 #define IRQ_ORION5X_GPIO_START	33
 #define NR_GPIO_IRQS		32
 
-#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+#define ORION5X_NR_IRQS		(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
 
 
 #endif
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index fe6a48a32..9dc3f59be 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -23,10 +23,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * KUROBOX-PRO Info
@@ -383,6 +383,7 @@ static void __init kurobox_pro_init(void)
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
@@ -397,6 +398,7 @@ MACHINE_END
 MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 028ea038d..dfdaa8a49 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -22,9 +22,9 @@
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Linkstation LS-CHL Info
@@ -320,6 +320,7 @@ static void __init lschl_init(void)
 MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
 	/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= lschl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 32b7129b7..47ba6e050 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -21,9 +21,9 @@
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Linkstation LS-HGL Info
@@ -267,6 +267,7 @@ static void __init ls_hgl_init(void)
 MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
 	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= ls_hgl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
deleted file mode 100644
index a6493e76f..000000000
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * arch/arm/mach-orion5x/lsmini-setup.c
- *
- * Maintainer: Alexey Kopytko <alexey@kopytko.ru>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * Linkstation Mini Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LSMINI_NOR_BOOT_BASE	0xf4000000
-#define LSMINI_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data lsmini_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource lsmini_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LSMINI_NOR_BOOT_BASE,
-	.end	= LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lsmini_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &lsmini_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &lsmini_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data lsmini_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata lsmini_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LSMINI_GPIO_LED_ALARM	2
-#define LSMINI_GPIO_LED_INFO	3
-#define LSMINI_GPIO_LED_FUNC	9
-#define LSMINI_GPIO_LED_PWR	14
-
-static struct gpio_led lsmini_led_pins[] = {
-	{
-		.name	   = "alarm:red",
-		.gpio	   = LSMINI_GPIO_LED_ALARM,
-		.active_low     = 1,
-	}, {
-		.name	   = "info:amber",
-		.gpio	   = LSMINI_GPIO_LED_INFO,
-		.active_low     = 1,
-	}, {
-		.name	   = "func:blue:top",
-		.gpio	   = LSMINI_GPIO_LED_FUNC,
-		.active_low     = 1,
-	}, {
-		.name	   = "power:blue:bottom",
-		.gpio	   = LSMINI_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data lsmini_led_data = {
-	.leds	   = lsmini_led_pins,
-	.num_leds       = ARRAY_SIZE(lsmini_led_pins),
-};
-
-static struct platform_device lsmini_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &lsmini_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-
-#define LSMINI_GPIO_KEY_FUNC       15
-#define LSMINI_GPIO_KEY_POWER	   18
-#define LSMINI_GPIO_KEY_AUTOPOWER 17
-
-#define LSMINI_SW_POWER		0x00
-#define LSMINI_SW_AUTOPOWER	0x01
-
-static struct gpio_keys_button lsmini_buttons[] = {
-	{
-		.code	   = KEY_OPTION,
-		.gpio	   = LSMINI_GPIO_KEY_FUNC,
-		.desc	   = "Function Button",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LSMINI_SW_POWER,
-		.gpio	   = LSMINI_GPIO_KEY_POWER,
-		.desc	   = "Power-on Switch",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LSMINI_SW_AUTOPOWER,
-		.gpio	   = LSMINI_GPIO_KEY_AUTOPOWER,
-		.desc	   = "Power-auto Switch",
-		.active_low     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data lsmini_button_data = {
-	.buttons	= lsmini_buttons,
-	.nbuttons       = ARRAY_SIZE(lsmini_buttons),
-};
-
-static struct platform_device lsmini_button_device = {
-	.name	   = "gpio-keys",
-	.id	     = -1,
-	.num_resources  = 0,
-	.dev	    = {
-		.platform_data  = &lsmini_button_data,
-	},
-};
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data lsmini_sata_data = {
-	.n_ports	= 2,
-};
-
-
-/*****************************************************************************
- * Linkstation Mini specific power off method: reboot
- ****************************************************************************/
-/*
- * On the Linkstation Mini, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- */
-
-static void lsmini_power_off(void)
-{
-	orion5x_restart(REBOOT_HARD, NULL);
-}
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-#define LSMINI_GPIO_USB_POWER	16
-#define LSMINI_GPIO_AUTO_POWER	17
-#define LSMINI_GPIO_POWER	18
-
-#define LSMINI_GPIO_HDD_POWER0	1
-#define LSMINI_GPIO_HDD_POWER1	19
-
-static unsigned int lsmini_mpp_modes[] __initdata = {
-	MPP0_UNUSED, /* LED_RESERVE1 (unused) */
-	MPP1_GPIO, /* HDD_PWR */
-	MPP2_GPIO, /* LED_ALARM */
-	MPP3_GPIO, /* LED_INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_UNUSED,
-	MPP7_UNUSED,
-	MPP8_UNUSED,
-	MPP9_GPIO, /* LED_FUNC */
-	MPP10_UNUSED,
-	MPP11_UNUSED, /* LED_ETH (dummy) */
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_GPIO, /* LED_PWR */
-	MPP15_GPIO, /* FUNC */
-	MPP16_GPIO, /* USB_PWR */
-	MPP17_GPIO, /* AUTO_POWER */
-	MPP18_GPIO, /* POWER */
-	MPP19_GPIO, /* HDD_PWR1 */
-	0,
-};
-
-static void __init lsmini_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(lsmini_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&lsmini_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&lsmini_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    LSMINI_NOR_BOOT_BASE,
-				    LSMINI_NOR_BOOT_SIZE);
-	platform_device_register(&lsmini_nor_flash);
-
-	platform_device_register(&lsmini_button_device);
-
-	platform_device_register(&lsmini_leds);
-
-	i2c_register_board_info(0, &lsmini_i2c_rtc, 1);
-
-	/* enable USB power */
-	gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = lsmini_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-#ifdef CONFIG_MACH_LINKSTATION_MINI
-MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
-	/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
-	.atag_offset	= 0x100,
-	.init_machine	= lsmini_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index 5b70026f4..19ef18594 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,8 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
 #include <plat/mpp.h>
+#include "orion5x.h"
 #include "mpp.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index e032f01da..2bf8ec75e 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -21,9 +21,9 @@
 #include <linux/ata_platform.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 #define MV2120_NOR_BOOT_BASE	0xf4000000
 #define MV2120_NOR_BOOT_SIZE	SZ_512K
@@ -232,6 +232,7 @@ static void __init mv2120_init(void)
 MACHINE_START(MV2120, "HP Media Vault mv2120")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= mv2120_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index ba73dc7ff..bf6be4cfd 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -24,10 +24,10 @@
 #include <linux/delay.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * LaCie 2Big Network Info
@@ -423,6 +423,7 @@ static void __init net2big_init(void)
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(NET2BIG, "LaCie 2Big Network")
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= net2big_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/orion5x.h
index b78ff3248..3364df331 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/orion5x.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-orion5x/include/mach/orion5x.h
- *
  * Generic definitions of Orion SoC flavors:
  *  Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
  *
@@ -14,6 +12,8 @@
 #ifndef __ASM_ARCH_ORION5X_H
 #define __ASM_ARCH_ORION5X_H
 
+#include "irqs.h"
+
 /*****************************************************************************
  * Orion Address Maps
  *
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index b02f3947b..ecb998e7f 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -19,8 +19,8 @@
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
 #include <plat/addr-map.h>
-#include <mach/orion5x.h>
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Orion has one PCIe controller and one PCI controller.
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 213b3e143..c742e7b40 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -20,9 +20,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5181L FXO Info
@@ -169,6 +169,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init);
 MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
 	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f5181l_fxo_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 594800e1d..7e977b794 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -21,9 +21,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5181L GE Info
@@ -181,6 +181,7 @@ subsys_initcall(rd88f5181l_ge_pci_init);
 MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f5181l_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index b576ef5f1..fe3e67c81 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -23,9 +23,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5182 Info
@@ -281,6 +281,7 @@ static void __init rd88f5182_init(void)
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f5182_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 78a1e6ab1..4bf80dd54 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -22,8 +22,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
+#include "orion5x.h"
 
 static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
 	.phy_addr	= -1,
@@ -119,6 +119,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init);
 MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f6183ap_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 12086745c..deb5e29ac 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -22,9 +22,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Terastation Pro 2/Live Info
@@ -359,6 +359,7 @@ static void __init tsp2_init(void)
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= tsp2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index c725b7cb9..7bd671b28 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -25,9 +25,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 #include "tsx09-common.h"
 
 #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
@@ -324,6 +324,7 @@ static void __init qnap_ts209_init(void)
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= qnap_ts209_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index cf2ab531c..a77613b14 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -27,9 +27,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 #include "tsx09-common.h"
 
 /*****************************************************************************
@@ -313,6 +313,7 @@ static void __init qnap_ts409_init(void)
 MACHINE_START(TS409, "QNAP TS-409")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= qnap_ts409_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 1b704d35c..8d597267d 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -16,16 +16,16 @@
 #include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
-#include <linux/m48t86.h>
+#include <linux/platform_data/rtc-m48t86.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/timeriomem-rng.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 #include "ts78xx-fpga.h"
 
 /*****************************************************************************
@@ -176,7 +176,7 @@ static void ts78xx_ts_rtc_unload(void)
 static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 			unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		unsigned char bits;
@@ -200,7 +200,7 @@ static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
 static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd,
 			const uint8_t *buf, int len)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 	void __iomem *io_base = chip->IO_ADDR_W;
 	unsigned long off = ((unsigned long)buf & 3);
 	int sz;
@@ -227,7 +227,7 @@ static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd,
 static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd,
 			uint8_t *buf, int len)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 	void __iomem *io_base = chip->IO_ADDR_R;
 	unsigned long off = ((unsigned long)buf & 3);
 	int sz;
@@ -615,6 +615,7 @@ static void __init ts78xx_init(void)
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
 	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= ts78xx_init,
 	.map_io		= ts78xx_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
index 7189827d6..89774985d 100644
--- a/arch/arm/mach-orion5x/tsx09-common.c
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -15,7 +15,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/timex.h>
 #include <linux/serial_reg.h>
-#include <mach/orion5x.h>
+#include "orion5x.h"
 #include "tsx09-common.h"
 #include "common.h"
 
@@ -53,57 +53,14 @@ struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static int __init qnap_tsx09_parse_hex_nibble(char n)
-{
-	if (n >= '0' && n <= '9')
-		return n - '0';
-
-	if (n >= 'A' && n <= 'F')
-		return n - 'A' + 10;
-
-	if (n >= 'a' && n <= 'f')
-		return n - 'a' + 10;
-
-	return -1;
-}
-
-static int __init qnap_tsx09_parse_hex_byte(const char *b)
-{
-	int hi;
-	int lo;
-
-	hi = qnap_tsx09_parse_hex_nibble(b[0]);
-	lo = qnap_tsx09_parse_hex_nibble(b[1]);
-
-	if (hi < 0 || lo < 0)
-		return -1;
-
-	return (hi << 4) | lo;
-}
-
 static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
 {
 	u_int8_t addr[6];
-	int i;
 
-	for (i = 0; i < 6; i++) {
-		int byte;
-
-		/*
-		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
-		 */
-		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
-			return -1;
-
-		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
-		if (byte < 0)
-			return -1;
-		addr[i] = byte;
-	}
+	if (!mac_pton(addr_str, addr))
+		return -1;
 
-	printk(KERN_INFO "tsx09: found ethernet mac address ");
-	for (i = 0; i < 6; i++)
-		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+	printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
 
 	memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
 
@@ -120,12 +77,12 @@ void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
 	unsigned long addr;
 
 	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
-		char *nor_page;
+		void __iomem *nor_page;
 		int ret = 0;
 
 		nor_page = ioremap(addr, 1024);
 		if (nor_page != NULL) {
-			ret = qnap_tsx09_check_mac_addr(nor_page);
+			ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page);
 			iounmap(nor_page);
 		}
 
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 80a56ee24..4e1e5c8f6 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
+#include "orion5x.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -174,6 +174,7 @@ subsys_initcall(wnr854t_pci_init);
 MACHINE_START(WNR854T, "Netgear WNR854T")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= wnr854t_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 670e30dc0..61e9027ef 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
+#include "orion5x.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -262,6 +262,7 @@ subsys_initcall(wrt350n_v2_pci_init);
 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= wrt350n_v2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig
new file mode 100644
index 000000000..29100beb2
--- /dev/null
+++ b/arch/arm/mach-oxnas/Kconfig
@@ -0,0 +1,26 @@
+menuconfig ARCH_OXNAS
+	bool "Oxford Semiconductor OXNAS Family SoCs"
+	select ARCH_HAS_RESET_CONTROLLER
+	select GPIOLIB
+	select PINCTRL
+	depends on ARCH_MULTI_V5
+	help
+	  Support for OxNas SoC family developed by Oxford Semiconductor.
+
+if ARCH_OXNAS
+
+config MACH_OX810SE
+	bool "Support OX810SE Based Products"
+	select ARCH_HAS_RESET_CONTROLLER
+	select COMMON_CLK_OXNAS
+	select CPU_ARM926T
+	select MFD_SYSCON
+	select OXNAS_RPS_TIMER
+	select PINCTRL_OXNAS
+	select RESET_CONTROLLER
+	select RESET_OXNAS
+	select VERSATILE_FPGA_IRQ
+	help
+	  Include Support for the Oxford Semiconductor OX810SE SoC Based Products.
+
+endif
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index 62240f69b..1c8f70152 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -1,7 +1,8 @@
 config ARCH_PICOXCELL
-	bool "Picochip PicoXcell" if ARCH_MULTI_V6
-	select ARCH_REQUIRE_GPIOLIB
+	bool "Picochip PicoXcell"
+	depends on ARCH_MULTI_V6
 	select ARM_VIC
 	select DW_APB_TIMER_OF
+	select GPIOLIB
 	select HAVE_TCM
 	select NO_IOPORT_MAP
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index ec79fea82..4e3d6d5c8 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -10,7 +10,6 @@
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 #include <linux/reboot.h>
 
 #include <asm/mach/arch.h>
@@ -54,7 +53,6 @@ static void __init picoxcell_map_io(void)
 
 static void __init picoxcell_init_machine(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	picoxcell_setup_restart();
 }
 
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 9ab893240..85e874a97 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,8 +1,10 @@
 menuconfig ARCH_SIRF
-	bool "CSR SiRF" if ARCH_MULTI_V7
+	bool "CSR SiRF"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
+	select RESET_CONTROLLER
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select NO_IOPORT_MAP
 	select REGMAP
 	select PINCTRL
@@ -26,6 +28,7 @@ config ARCH_ATLAS7
 	default y
 	select ARM_GIC
 	select CPU_V7
+	select ATLAS7_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	help
@@ -36,6 +39,7 @@ config ARCH_PRIMA2
 	default y
 	select SIRF_IRQ
 	select ZONE_DMA
+	select PRIMA2_TIMER
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
 
diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot
deleted file mode 100644
index c77a4883a..000000000
--- a/arch/arm/mach-prima2/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y		+= 0x00008000
-params_phys-y		:= 0x00000100
-initrd_phys-y		:= 0x00800000
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 3916a6665..6d77b622d 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -15,7 +15,7 @@
 #include <asm/mach/time.h>
 #include <asm/exception.h>
 
-extern struct smp_operations   sirfsoc_smp_ops;
+extern const struct smp_operations sirfsoc_smp_ops;
 extern void sirfsoc_secondary_startup(void);
 extern void sirfsoc_cpu_die(unsigned int cpu);
 
diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c
index 0ab2f8bae..a728c78b9 100644
--- a/arch/arm/mach-prima2/hotplug.c
+++ b/arch/arm/mach-prima2/hotplug.c
@@ -32,7 +32,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
  *
  * Called with IRQs disabled
  */
-void __ref sirfsoc_cpu_die(unsigned int cpu)
+void sirfsoc_cpu_die(unsigned int cpu)
 {
 	platform_do_lowpower(cpu);
 }
diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c
index e46c91094..0875b99ad 100644
--- a/arch/arm/mach-prima2/platsmp.c
+++ b/arch/arm/mach-prima2/platsmp.c
@@ -112,7 +112,7 @@ static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return pen_release != -1 ? -ENOSYS : 0;
 }
 
-struct smp_operations sirfsoc_smp_ops __initdata = {
+const struct smp_operations sirfsoc_smp_ops __initconst = {
 	.smp_secondary_init     = sirfsoc_secondary_init,
 	.smp_boot_secondary     = sirfsoc_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index d99d08eeb..83e94c95e 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -16,6 +16,7 @@
 #include <linux/of_platform.h>
 #include <linux/io.h>
 #include <linux/rtc/sirfsoc_rtciobrg.h>
+#include <asm/outercache.h>
 #include <asm/suspend.h>
 #include <asm/hardware/cache-l2x0.h>
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f09683687..cd894d69e 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -6,6 +6,7 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
 config MACH_PXA27X_DT
 	bool "Support PXA27x platforms from device tree"
+	select PINCTRL
 	select POWER_SUPPLY
 	select PXA27x
 	select USE_OF
@@ -17,6 +18,7 @@ config MACH_PXA27X_DT
 config MACH_PXA3XX_DT
 	bool "Support PXA3xx platforms from device tree"
 	select CPU_PXA300
+	select PINCTRL
 	select POWER_SUPPLY
 	select PXA3xx
 	select USE_OF
@@ -297,7 +299,6 @@ config MACH_MAGICIAN
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
-	select GPIO_SYSFS
 	select IWMMXT
 	select PXA27x
 	help
@@ -529,7 +530,7 @@ config MACH_TOSA
 
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA
+	depends on MACH_TOSA && NET
 	select RFKILL
 	help
 	  This is a simple driver that is able to control
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 12fb0f4ae..50e18ed37 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -30,8 +30,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
-#include <mach/pxa25x.h>
-#include <mach/gumstix.h>
+#include "pxa25x.h"
+#include "gumstix.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 8b90c4f2d..17d08abee 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -28,8 +28,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
-#include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
+#include "gumstix.h"
+#include "mfp-pxa25x.h"
 #include <mach/irqs.h>
 #include <linux/platform_data/video-pxafb.h>
 
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index d89729271..8a3c40929 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -42,13 +42,13 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/balloon3.h>
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 
@@ -496,18 +496,18 @@ static struct irq_chip balloon3_irq_chip = {
 	.irq_unmask	= balloon3_unmask_irq,
 };
 
-static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void balloon3_irq_handler(struct irq_desc *desc)
 {
 	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
 					balloon3_irq_enabled;
 	do {
-		/* clear useless edge notification */
-		if (desc->irq_data.chip->irq_ack) {
-			struct irq_data *d;
+		struct irq_data *d = irq_desc_get_irq_data(desc);
+		struct irq_chip *chip = irq_desc_get_chip(desc);
+		unsigned int irq;
 
-			d = irq_get_irq_data(BALLOON3_AUX_NIRQ);
-			desc->irq_data.chip->irq_ack(d);
-		}
+		/* clear useless edge notification */
+		if (chip->irq_ack)
+			chip->irq_ack(d);
 
 		while (pending) {
 			irq = BALLOON3_IRQ(0) + __ffs(pending);
@@ -528,7 +528,7 @@ static void __init balloon3_init_irq(void)
 	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
 		irq_set_chip_and_handler(irq, &balloon3_irq_chip,
 					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
@@ -572,7 +572,7 @@ static inline void balloon3_i2c_init(void) {}
 #if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index bf366b39f..1c3cbfca9 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -29,8 +29,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
+#include "pxa320.h"
+#include "mxm8x10.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index be751470d..b592f79a1 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 2503db9e3..be4a66166 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -14,14 +14,14 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 
-#include <linux/rtc-v3020.h>
+#include <linux/platform_data/rtc-v3020.h>
 #include <video/mbxfb.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/spi/libertas_spi.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmc-pxamci.h>
 
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index d8f816c24..3221ae15b 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -29,12 +29,12 @@
 void __iomem *it8152_base_address;
 static int cmx2xx_it8152_irq_gpio;
 
-static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+static void cmx2xx_it8152_irq_demux(struct irq_desc *desc)
 {
 	/* clear our parent irq */
 	desc->irq_data.chip->irq_ack(&desc->irq_data);
 
-	it8152_irq_demux(irq, desc);
+	it8152_irq_demux(desc);
 }
 
 void __cmx2xx_pci_init_irq(int irq_gpio)
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index a17a91eb8..7202022ee 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -22,9 +22,18 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #undef GPIO24_SSP1_SFRM
-#include <mach/pxa27x.h>
+#undef GPIO86_GPIO
+#undef GPIO87_GPIO
+#undef GPIO88_GPIO
+#undef GPIO89_GPIO
+#include "pxa27x.h"
+#undef GPIO24_SSP1_SFRM
+#undef GPIO86_GPIO
+#undef GPIO87_GPIO
+#undef GPIO88_GPIO
+#undef GPIO89_GPIO
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 5851f4c25..868448d2c 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -25,7 +25,8 @@
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
-#include <linux/rtc-v3020.h>
+#include <linux/platform_data/rtc-v3020.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
@@ -46,8 +47,8 @@
 #include <asm/setup.h>
 #include <asm/system_info.h>
 
-#include <mach/pxa300.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa300.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
@@ -305,11 +306,14 @@ static inline void cm_x300_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup cm_x300_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data cm_x300_backlight_data = {
-	.pwm_id		= 2,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
 	.enable_gpio	= -1,
 };
 
@@ -323,6 +327,7 @@ static struct platform_device cm_x300_backlight_device = {
 
 static void cm_x300_init_bl(void)
 {
+	pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
 	platform_device_register(&cm_x300_backlight_device);
 }
 #else
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 638b0bb88..dc44fbbe5 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -22,11 +22,11 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <asm/io.h>
 
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
+#include "pxa27x.h"
+#include "colibri.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x-udc.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 3aa264640..8cff770e6 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -20,6 +20,7 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c/pxa-i2c.h>
 
@@ -29,8 +30,8 @@
 #include <mach/hardware.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
@@ -184,11 +185,14 @@ static inline void income_lcd_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup income_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data income_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 0x3ff,
 	.dft_brightness	= 0x1ff,
-	.pwm_period_ns	= 1000000,
 	.enable_gpio	= -1,
 };
 
@@ -202,6 +206,7 @@ static struct platform_device income_backlight = {
 
 static void __init income_pwm_init(void)
 {
+	pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
 	platform_device_register(&income_backlight);
 }
 #else
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 350382633..e68acdd0c 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -27,8 +27,8 @@
 #include <asm/sizes.h>
 
 #include <mach/audio.h>
-#include <mach/colibri.h>
-#include <mach/pxa27x.h>
+#include "colibri.h"
+#include "pxa27x.h"
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index f1a1ac1fb..6a5558d95 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -22,8 +22,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa300.h>
-#include <mach/colibri.h>
+#include "pxa300.h"
+#include "colibri.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index f6cc8b0ab..17067a303 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -23,13 +23,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa320.h>
-#include <mach/colibri.h>
+#include "pxa320.h"
+#include "colibri.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 8240291ab..b04431bb4 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -22,8 +22,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
-#include <mach/colibri.h>
+#include "mfp-pxa300.h"
+#include "colibri.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/colibri.h
index cb4236e98..cb4236e98 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/colibri.h
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 89f790dda..10bfdb169 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/major.h>
@@ -48,12 +49,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <mach/corgi.h>
-#include <mach/sharpsl_pm.h>
+#include "sharpsl_pm.h"
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 7a39efc50..c71c483f4 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -27,7 +27,7 @@
 
 #include <mach/corgi.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/sharpsl_pm.h>
+#include "sharpsl_pm.h"
 
 #include "generic.h"
 
@@ -131,16 +131,11 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
 	return is_resume;
 }
 
-static unsigned long corgi_charger_wakeup(void)
+static bool corgi_charger_wakeup(void)
 {
-	unsigned long ret;
-
-	ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
-		| (!gpio_get_value(CORGI_GPIO_KEY_INT)
-		<< GPIO_bit(CORGI_GPIO_KEY_INT))
-		| (!gpio_get_value(CORGI_GPIO_WAKEUP)
-		<< GPIO_bit(CORGI_GPIO_WAKEUP));
-	return ret;
+	return !gpio_get_value(CORGI_GPIO_AC_IN) ||
+		!gpio_get_value(CORGI_GPIO_KEY_INT) ||
+		!gpio_get_value(CORGI_GPIO_WAKEUP);
 }
 
 unsigned long corgipm_read_devdata(int type)
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index fadfff8fe..bf19b8426 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -21,8 +21,8 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/csb726.h>
-#include <mach/pxa27x.h>
+#include "csb726.h"
+#include "pxa27x.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/csb726.h
index 00cfbbbf7..f1f2a78cf 100644
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/csb726.h
@@ -11,7 +11,7 @@
 #ifndef CSB726_H
 #define CSB726_H
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 #define CSB726_GPIO_IRQ_LAN	52
 #define CSB726_GPIO_IRQ_SM501	53
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 35434662d..fffb697bb 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -6,7 +6,7 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/i2c/pxa-i2c.h>
 
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -14,9 +14,10 @@
 #include <mach/irqs.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/hardware.h>
+#include <linux/platform_data/mmp_dma.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "devices.h"
@@ -394,6 +395,26 @@ static struct resource pxa_ir_resources[] = {
 		.end    = IRQ_ICP,
 		.flags  = IORESOURCE_IRQ,
 	},
+	[3] = {
+		.start  = 0x40800000,
+		.end	= 0x4080001b,
+		.flags  = IORESOURCE_MEM,
+	},
+	[4] = {
+		.start  = 0x40700000,
+		.end	= 0x40700023,
+		.flags  = IORESOURCE_MEM,
+	},
+	[5] = {
+		.start  = 17,
+		.end	= 17,
+		.flags  = IORESOURCE_DMA,
+	},
+	[6] = {
+		.start  = 18,
+		.end	= 18,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device pxa_device_ficp = {
@@ -439,25 +460,11 @@ struct platform_device pxa_device_rtc = {
 	.resource       = pxa_rtc_resources,
 };
 
-static struct resource sa1100_rtc_resources[] = {
-	{
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.name	= "rtc 1Hz",
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.name	= "rtc alarm",
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
 struct platform_device sa1100_device_rtc = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
-	.resource	= sa1100_rtc_resources,
+	.num_resources  = ARRAY_SIZE(pxa_rtc_resources),
+	.resource       = pxa_rtc_resources,
 };
 
 static struct resource pxa_ac97_resources[] = {
@@ -1193,3 +1200,41 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
 	pd->dev.platform_data = info;
 	platform_device_add(pd);
 }
+
+static struct mmp_dma_platdata pxa_dma_pdata = {
+	.dma_channels	= 0,
+	.nb_requestors	= 0,
+};
+
+static struct resource pxa_dma_resource[] = {
+	[0] = {
+		.start	= 0x40000000,
+		.end	= 0x4000ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DMA,
+		.end	= IRQ_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxadma_dmamask = 0xffffffffUL;
+
+static struct platform_device pxa2xx_pxa_dma = {
+	.name		= "pxa-dma",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &pxadma_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa_dma_resource),
+	.resource	= pxa_dma_resource,
+};
+
+void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
+{
+	pxa_dma_pdata.dma_channels = nb_channels;
+	pxa_dma_pdata.nb_requestors = nb_requestors;
+	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
+}
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9d7072b04..03354c21e 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -14,7 +14,7 @@
 #include <linux/delay.h>
 
 #include <linux/dm9000.h>
-#include <linux/rtc-v3020.h>
+#include <linux/platform_data/rtc-v3020.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
@@ -39,14 +39,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -289,7 +289,7 @@ static void nand_cs_off(void)
 static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
 				 unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
 
 	dsb();
diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/eseries-irq.h
index de292b269..de292b269 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-irq.h
+++ b/arch/arm/mach-pxa/eseries-irq.h
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 16dc95f68..fa9d71d19 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -31,12 +31,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/eseries-gpio.h>
-#include <mach/eseries-irq.h>
+#include "eseries-irq.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 
 #include "devices.h"
@@ -57,7 +57,7 @@ struct gpio_vbus_mach_info e7xx_udc_info = {
 	.gpio_pullup_inverted = 1
 };
 
-static struct platform_device e7xx_gpio_vbus = {
+static struct platform_device e7xx_gpio_vbus __maybe_unused = {
 	.name	= "gpio-vbus",
 	.id	= -1,
 	.dev	= {
@@ -126,9 +126,9 @@ struct resource eseries_tmio_resources[] = {
 };
 
 /* Some e-series hardware cannot control the 32K clock */
-static void __init eseries_register_clks(void)
+static void __init __maybe_unused eseries_register_clks(void)
 {
-	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768);
+	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, 0, 32768);
 }
 
 #ifdef CONFIG_MACH_E330
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index ab93441e5..34ad0a89d 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
@@ -28,12 +29,12 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/hardware.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -49,11 +50,14 @@
 #define GPIO19_GEN1_CAM_RST		19
 #define GPIO28_GEN2_CAM_RST		28
 
+static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data ezx_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -79,7 +83,7 @@ static struct pxafb_mode_info mode_ezx_old = {
 	.sync			= 0,
 };
 
-static struct pxafb_mach_info ezx_fb_info_1 = {
+static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = {
 	.modes		= &mode_ezx_old,
 	.num_modes	= 1,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP,
@@ -100,17 +104,17 @@ static struct pxafb_mode_info mode_72r89803y01 = {
 	.sync			= 0,
 };
 
-static struct pxafb_mach_info ezx_fb_info_2 = {
+static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = {
 	.modes		= &mode_72r89803y01,
 	.num_modes	= 1,
 	.lcd_conn	= LCD_COLOR_TFT_18BPP,
 };
 
-static struct platform_device *ezx_devices[] __initdata = {
+static struct platform_device *ezx_devices[] __initdata __maybe_unused = {
 	&ezx_backlight_device,
 };
 
-static unsigned long ezx_pin_config[] __initdata = {
+static unsigned long ezx_pin_config[] __initdata __maybe_unused = {
 	/* PWM backlight */
 	GPIO16_PWM0_OUT,
 
@@ -817,6 +821,7 @@ static void __init a780_init(void)
 		platform_device_register(&a780_camera);
 	}
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
@@ -884,6 +889,7 @@ static void __init e680_init(void)
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
 }
@@ -951,6 +957,7 @@ static void __init a1200_init(void)
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
 }
@@ -1143,6 +1150,7 @@ static void __init a910_init(void)
 		platform_device_register(&a910_camera);
 	}
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
@@ -1210,6 +1218,7 @@ static void __init e6_init(void)
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
 }
@@ -1251,6 +1260,7 @@ static void __init e2_init(void)
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
 }
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index f6c76a3ee..9c5b2fb05 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -40,10 +40,10 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/gumstix.h>
+#include "udc.h"
+#include "gumstix.h"
 
 #include "generic.h"
 
@@ -139,14 +139,14 @@ static void gumstix_setup_bt_clock(void)
 {
 	int timeout = 500;
 
-	if (!(OSCC & OSCC_OOK))
+	if (!(readl(OSCC) & OSCC_OOK))
 		pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
 	else
 		return;
 
-	OSCC |= OSCC_OON;
+	writel(readl(OSCC) | OSCC_OON, OSCC);
 	do {
-		if (OSCC & OSCC_OOK)
+		if (readl(OSCC) & OSCC_OOK)
 			break;
 		udelay(1);
 	} while (--timeout);
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/gumstix.h
index f7df27bbb..825f2d126 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/gumstix.h
@@ -6,7 +6,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /* BTRESET - Reset line to Bluetooth module, active low signal. */
 #define GPIO_GUMSTIX_BTRESET          7
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 875ec3351..be2a9c3fd 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -30,9 +30,9 @@
 #include <asm/mach/map.h>
 #include <asm/irq.h>
 
-#include <mach/pxa25x.h>
-#include <mach/h5000.h>
-#include <mach/udc.h>
+#include "pxa25x.h"
+#include "h5000.h"
+#include "udc.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/h5000.h b/arch/arm/mach-pxa/h5000.h
index 2a5ae3802..252461fd2 100644
--- a/arch/arm/mach-pxa/include/mach/h5000.h
+++ b/arch/arm/mach-pxa/h5000.h
@@ -18,7 +18,7 @@
 #ifndef __ASM_ARCH_H5000_H
 #define __ASM_ARCH_H5000_H
 
-#include <mach/mfp-pxa25x.h>
+#include "mfp-pxa25x.h"
 
 /*
  * CPU GPIOs
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 7a8d749a0..70e9c0659 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -24,7 +24,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 5fb41ad6e..4a2f9aba9 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -44,7 +44,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/hx4700.h>
 #include <linux/platform_data/irda-pxaficp.h>
 
@@ -557,10 +557,8 @@ static struct platform_device hx4700_lcd = {
  */
 
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = -1,	/* Superseded by pwm_lookup */
 	.max_brightness = 200,
 	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
 	.enable_gpio    = -1,
 };
 
@@ -630,7 +628,6 @@ static struct spi_board_info tsc2046_board_info[] __initdata = {
 
 static struct pxa2xx_spi_master pxa_ssp2_master_info = {
 	.num_chipselect = 1,
-	.clock_enable   = CKEN_SSP2,
 	.enable_dma     = 1,
 };
 
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 9b0eb0252..cbaf4f6ed 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -20,8 +20,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
+#include "pxa320.h"
+#include "mxm8x10.h"
 
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -116,13 +116,11 @@ static struct spi_board_info mcp251x_board_info[] = {
 };
 
 static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
-	.clock_enable   = CKEN_SSP3,
 	.num_chipselect = 2,
 	.enable_dma     = 1
 };
 
 static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
-	.clock_enable   = CKEN_SSP4,
 	.num_chipselect = 2,
 	.enable_dma     = 1
 };
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index f6d02e4cb..66070acaa 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -31,8 +31,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
+#include "pxa25x.h"
+#include "idp.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/bitfield.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -83,7 +83,8 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_USE_DMA | SMC91X_NOWAIT,
 };
 
 static struct platform_device smc91x_device = {
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/idp.h
index 7e63f4680..7182ff92b 100644
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/idp.h
@@ -23,7 +23,7 @@
  * IDP hardware.
  */
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 #define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
 #define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
index d28fe2912..07b93fd24 100644
--- a/arch/arm/mach-pxa/include/mach/addr-map.h
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -44,6 +44,13 @@
  */
 
 /*
+ * DFI Bus for NAND, PXA3xx only
+ */
+#define NAND_PHYS		0x43100000
+#define NAND_VIRT		IOMEM(0xf6300000)
+#define NAND_SIZE		0x00100000
+
+/*
  * Internal Memory Controller (PXA27x and later)
  */
 #define IMEMC_PHYS		0x58000000
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index ba6a6e1d2..5f6b850eb 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -52,9 +52,9 @@
 #define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
 #define GPIO102_MAGICIAN_KEY_PHONE		102
 #define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_POWER_1 		104
-#define GPIO105_MAGICIAN_LCD_POWER_2		105
-#define GPIO106_MAGICIAN_LCD_POWER_3		106
+#define GPIO104_MAGICIAN_LCD_VOFF_EN		104
+#define GPIO105_MAGICIAN_LCD_VON_EN		105
+#define GPIO106_MAGICIAN_LCD_DCDC_NRESET	106
 #define GPIO107_MAGICIAN_DS1WM_IRQ		107
 #define GPIO108_MAGICIAN_GSM_READY		108
 #define GPIO114_MAGICIAN_UNKNOWN		114
@@ -78,43 +78,51 @@
  * CPLD EGPIOs
  */
 
-#define MAGICIAN_EGPIO_BASE			PXA_NR_BUILTIN_GPIO
+#define MAGICIAN_EGPIO_BASE		PXA_NR_BUILTIN_GPIO
 #define MAGICIAN_EGPIO(reg,bit) \
 	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
 
 /* output */
 
-#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2		MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
+#define EGPIO_MAGICIAN_TOPPOLY_POWER	MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER	MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET	MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER	MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER	MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER		MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0		MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1		MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER	MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET	MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER	MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER		MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER		MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC	MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN	MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP	MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2	MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_BQ24022_ISET2	MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_NICD_CHARGE	MAGICIAN_EGPIO(2, 6)
+#define EGPIO_MAGICIAN_GSM_POWER	MAGICIAN_EGPIO(2, 7)
 
 /* input */
 
-#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
+/* USB or AC charger type */
+#define EGPIO_MAGICIAN_CABLE_TYPE	MAGICIAN_EGPIO(4, 0)
+/*
+ * Vbus is detected
+ * FIXME behaves like (6,3), may differ for host/device
+ */
+#define EGPIO_MAGICIAN_CABLE_VBUS	MAGICIAN_EGPIO(4, 1)
 
-#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
+#define EGPIO_MAGICIAN_BOARD_ID0	MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1	MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2	MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT	MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY	MAGICIAN_EGPIO(5, 4)
 
-#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
+#define EGPIO_MAGICIAN_EP_INSERT	MAGICIAN_EGPIO(6, 1)
+/* FIXME behaves like (4,1), may differ for host/device */
+#define EGPIO_MAGICIAN_CABLE_INSERTED	MAGICIAN_EGPIO(6, 3)
 
 #endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
index 1b80a4805..e69de29bb 100644
--- a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
+++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
@@ -1,163 +0,0 @@
-#ifndef _ASM_ARCH_PXA25X_UDC_H
-#define _ASM_ARCH_PXA25X_UDC_H
-
-#ifdef _ASM_ARCH_PXA27X_UDC_H
-#error "You can't include both PXA25x and PXA27x UDC support"
-#endif
-
-#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
-#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
-#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
-
-#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
-#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
-#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
-#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
-#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
-#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
-#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
-#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
-#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
-#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
-#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
-#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
-#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
-#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
-#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
-#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
-#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
-#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
-#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
-#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
-#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
-#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
-#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
-#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
-
-#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index f1dd62946..5537d5601 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -134,10 +134,10 @@
 /*
  * PXA2xx specific Core clock definitions
  */
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+#define CCCR		io_p2v(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR		io_p2v(0x4130000C)  /* Core Clock Status Register */
+#define CKEN		io_p2v(0x41300004)  /* Clock Enable Register */
+#define OSCC		io_p2v(0x41300008)  /* Oscillator Configuration Register */
 
 #define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
 #define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index f4d48d207..888bf7ade 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -18,7 +18,7 @@
 /*
  * Oscillator Configuration Register (OSCC)
  */
-#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+#define OSCC           io_p2v(0x41350000)  /* Oscillator Configuration Register */
 
 #define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
 
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 98608c557..9c10248fa 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -133,7 +133,6 @@ static int pxa_irq_map(struct irq_domain *h, unsigned int virq,
 	irq_set_chip_and_handler(virq, &pxa_internal_irq_chip,
 				 handle_level_irq);
 	irq_set_chip_data(virq, base);
-	set_irq_flags(virq, IRQF_VALID);
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 5d665588c..051c55477 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -41,11 +41,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa300.h>
+#include "pxa300.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/littleton.h>
+#include "littleton.h"
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/littleton.h
index 8066be54e..8066be54e 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/littleton.h
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index eaee2c20b..e9f401b0a 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -23,6 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 
@@ -39,8 +40,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
-#include <mach/lpd270.h>
+#include "pxa27x.h"
+#include "lpd270.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -120,8 +121,9 @@ static struct irq_chip lpd270_irq_chip = {
 	.irq_unmask	= lpd270_unmask_irq,
 };
 
-static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void lpd270_irq_handler(struct irq_desc *desc)
 {
+	unsigned int irq;
 	unsigned long pending;
 
 	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
@@ -151,7 +153,7 @@ static void __init lpd270_init_irq(void)
 	for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
 		irq_set_chip_and_handler(irq, &lpd270_irq_chip,
 					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
 	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
@@ -270,11 +272,14 @@ static struct platform_device lpd270_flash_device[2] = {
 	},
 };
 
+static struct pwm_lookup lpd270_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data lpd270_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1,
 	.dft_brightness	= 1,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -473,6 +478,7 @@ static void __init lpd270_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/lpd270.h
index 4edc712a2..4edc712a2 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/lpd270.h
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 6de32fa0e..d6159f8ef 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -47,14 +47,14 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
 #include <mach/lubbock.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
@@ -137,6 +137,18 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	// no D+ pullup; lubbock can't connect/disconnect in software
 };
 
+static void lubbock_init_pcmcia(void)
+{
+	struct clk *clk;
+
+	/* Add an alias for the SA1111 PCMCIA clock */
+	clk = clk_get_sys("pxa2xx-pcmcia", NULL);
+	if (!IS_ERR(clk)) {
+		clkdev_create(clk, NULL, "1800");
+		clk_put(clk);
+	}
+}
+
 static struct resource sa1111_resources[] = {
 	[0] = {
 		.start	= 0x10000000,
@@ -467,6 +479,8 @@ static void __init lubbock_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
+	lubbock_init_pcmcia();
+
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_fb_info(NULL, &sharp_lm8v31);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index a9761c293..abc918169 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -24,8 +24,10 @@
 #include <linux/mfd/htc-pasic3.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/gpio_vbus.h>
@@ -36,13 +38,19 @@
 #include <asm/mach/arch.h>
 #include <asm/system_info.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/magician.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 
+#include <linux/regulator/max1586.h>
+
+#include <linux/platform_data/pxa2xx_udc.h>
+
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include "devices.h"
 #include "generic.h"
 
@@ -52,36 +60,36 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO20_nSDCS_2,
 	GPIO21_nSDCS_3,
 	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* PASIC3 */
-	GPIO79_nCS_3,   /* EGPIO CPLD */
+	GPIO78_nCS_2,	/* PASIC3 */
+	GPIO79_nCS_3,	/* EGPIO CPLD */
 	GPIO80_nCS_4,
 	GPIO33_nCS_5,
 
-	/* I2C */
+	/* I2C UDA1380 + OV9640 */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
 
-	/* PWM 0 */
+	/* PWM 0 - LCD backlight */
 	GPIO16_PWM0_OUT,
 
-	/* I2S */
+	/* I2S UDA1380 capture */
 	GPIO28_I2S_BITCLK_OUT,
 	GPIO29_I2S_SDATA_IN,
 	GPIO31_I2S_SYNC,
 	GPIO113_I2S_SYSCLK,
 
-	/* SSP 1 */
+	/* SSP 1 UDA1380 playback */
 	GPIO23_SSP1_SCLK,
 	GPIO24_SSP1_SFRM,
 	GPIO25_SSP1_TXD,
 
-	/* SSP 2 */
+	/* SSP 2 TSC2046 touchscreen */
 	GPIO19_SSP2_SCLK,
 	GPIO14_SSP2_SFRM,
 	GPIO89_SSP2_TXD,
 	GPIO88_SSP2_RXD,
 
-	/* MMC */
+	/* MMC/SD/SDHC slot */
 	GPIO32_MMC_CLK,
 	GPIO92_MMC_DAT_0,
 	GPIO109_MMC_DAT_1,
@@ -92,7 +100,7 @@ static unsigned long magician_pin_config[] __initdata = {
 	/* LCD */
 	GPIOxx_LCD_TFT_16BPP,
 
-	/* QCI */
+	/* QCI camera interface */
 	GPIO12_CIF_DD_7,
 	GPIO17_CIF_DD_6,
 	GPIO50_CIF_DD_3,
@@ -120,12 +128,13 @@ static unsigned long magician_pin_config[] __initdata = {
 };
 
 /*
- * IRDA
+ * IrDA
  */
 
 static struct pxaficp_platform_data magician_ficp_info = {
 	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.gpio_pwdown_inverted	= 0,
 };
 
 /*
@@ -134,11 +143,11 @@ static struct pxaficp_platform_data magician_ficp_info = {
 
 #define INIT_KEY(_code, _gpio, _desc)	\
 	{				\
-		.code   = KEY_##_code,	\
-		.gpio   = _gpio,	\
-		.desc   = _desc,	\
-		.type   = EV_KEY,	\
-		.wakeup = 1,		\
+		.code	= KEY_##_code,	\
+		.gpio	= _gpio,	\
+		.desc	= _desc,	\
+		.type	= EV_KEY,	\
+		.wakeup	= 1,		\
 	}
 
 static struct gpio_keys_button magician_button_table[] = {
@@ -160,164 +169,162 @@ static struct gpio_keys_button magician_button_table[] = {
 };
 
 static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons  = magician_button_table,
-	.nbuttons = ARRAY_SIZE(magician_button_table),
+	.buttons	= magician_button_table,
+	.nbuttons	= ARRAY_SIZE(magician_button_table),
 };
 
 static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
+	.name	= "gpio-keys",
+	.dev	= {
 		.platform_data = &gpio_keys_data,
 	},
-	.id   = -1,
+	.id	= -1,
 };
 
-
 /*
  * EGPIO (Xilinx CPLD)
  *
- * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
+ * 32-bit aligned 8-bit registers
+ * 16 possible registers (reg windows size), only 7 used:
+ * 3x output, 1x irq, 3x input
  */
 
 static struct resource egpio_resources[] = {
 	[0] = {
-		.start = PXA_CS3_PHYS,
-		.end   = PXA_CS3_PHYS + 0x20 - 1,
-		.flags = IORESOURCE_MEM,
+		.start	= PXA_CS3_PHYS,
+		.end	= PXA_CS3_PHYS + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end   = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.flags = IORESOURCE_IRQ,
+		.start	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct htc_egpio_chip egpio_chips[] = {
 	[0] = {
-		.reg_start = 0,
-		.gpio_base = MAGICIAN_EGPIO(0, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_OUTPUT,
-		.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
+		.reg_start	= 0,
+		.gpio_base	= MAGICIAN_EGPIO(0, 0),
+		.num_gpios	= 24,
+		.direction	= HTC_EGPIO_OUTPUT,
+		/*
+		 * Depends on modules configuration
+		 */
+		.initial_values	= 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
 	},
 	[1] = {
-		.reg_start = 4,
-		.gpio_base = MAGICIAN_EGPIO(4, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_INPUT,
+		.reg_start	= 4,
+		.gpio_base	= MAGICIAN_EGPIO(4, 0),
+		.num_gpios	= 24,
+		.direction	= HTC_EGPIO_INPUT,
 	},
 };
 
 static struct htc_egpio_platform_data egpio_info = {
-	.reg_width    = 8,
-	.bus_width    = 32,
-	.irq_base     = IRQ_BOARD_START,
-	.num_irqs     = 4,
-	.ack_register = 3,
-	.chip         = egpio_chips,
-	.num_chips    = ARRAY_SIZE(egpio_chips),
+	.reg_width	= 8,
+	.bus_width	= 32,
+	.irq_base	= IRQ_BOARD_START,
+	.num_irqs	= 4,
+	.ack_register	= 3,
+	.chip		= egpio_chips,
+	.num_chips	= ARRAY_SIZE(egpio_chips),
 };
 
 static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
+	.name		= "htc-egpio",
+	.id		= -1,
+	.resource	= egpio_resources,
+	.num_resources	= ARRAY_SIZE(egpio_resources),
 	.dev = {
 		.platform_data = &egpio_info,
 	},
 };
 
 /*
- * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
+ * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
  */
 
 static struct pxafb_mode_info toppoly_modes[] = {
 	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 11,
-		.vsync_len    = 3,
-		.left_margin  = 19,
-		.upper_margin = 2,
-		.right_margin = 10,
-		.lower_margin = 2,
-		.sync         = 0,
+		.pixclock	= 96153,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 11,
+		.vsync_len	= 3,
+		.left_margin	= 19,
+		.upper_margin	= 2,
+		.right_margin	= 10,
+		.lower_margin	= 2,
+		.sync		= 0,
 	},
 };
 
 static struct pxafb_mode_info samsung_modes[] = {
 	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 8,
-		.vsync_len    = 4,
-		.left_margin  = 9,
-		.upper_margin = 4,
-		.right_margin = 9,
-		.lower_margin = 4,
-		.sync         = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.pixclock	= 226469,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 4,
+		.left_margin	= 9,
+		.upper_margin	= 4,
+		.right_margin	= 9,
+		.lower_margin	= 4,
+		.sync	= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	},
 };
 
 static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
 {
-	pr_debug("Toppoly LCD power\n");
+	pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
 
 	if (on) {
-		pr_debug("on\n");
 		gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
 		udelay(2000);
 		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
 		udelay(2000);
 		/* FIXME: enable LCDC here */
 		udelay(2000);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
 		udelay(2000);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
 	} else {
-		pr_debug("off\n");
 		msleep(15);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
 		udelay(500);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
 		udelay(1000);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
 		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
 	}
 }
 
 static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
 {
-	pr_debug("Samsung LCD power\n");
+	pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
 
 	if (on) {
-		pr_debug("on\n");
 		if (system_rev < 3)
 			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
 		else
 			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
-		mdelay(10);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
-		mdelay(30);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
-		mdelay(10);
+		mdelay(6);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
+		mdelay(6);	/* Avdd -> Voff >5ms */
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
+		mdelay(16);	/* Voff -> Von >(5+10)ms */
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
 	} else {
-		pr_debug("off\n");
-		mdelay(10);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
-		mdelay(30);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		mdelay(10);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
+		mdelay(16);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
+		mdelay(6);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
+		mdelay(6);
 		if (system_rev < 3)
 			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
 		else
@@ -326,29 +333,43 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
 }
 
 static struct pxafb_mach_info toppoly_info = {
-	.modes           = toppoly_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power = toppoly_lcd_power,
+	.modes			= toppoly_modes,
+	.num_modes		= 1,
+	.fixed_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP,
+	.pxafb_lcd_power	= toppoly_lcd_power,
 };
 
 static struct pxafb_mach_info samsung_info = {
-	.modes           = samsung_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	 = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
-			   LCD_ALTERNATE_MAPPING,
-	.pxafb_lcd_power = samsung_lcd_power,
+	.modes			= samsung_modes,
+	.num_modes		= 1,
+	.fixed_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+		LCD_ALTERNATE_MAPPING,
+	.pxafb_lcd_power	= samsung_lcd_power,
 };
 
 /*
  * Backlight
  */
 
+static struct pwm_lookup magician_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923,
+		   PWM_POLARITY_NORMAL),
+};
+
+ /*
+ * fixed regulator for pwm_backlight
+ */
+
+static struct regulator_consumer_supply pwm_backlight_supply[] = {
+	REGULATOR_SUPPLY("power", "pwm_backlight"),
+};
+
+
 static struct gpio magician_bl_gpios[] = {
-	{ EGPIO_MAGICIAN_BL_POWER,  GPIOF_DIR_OUT, "Backlight power" },
-	{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
+	{ EGPIO_MAGICIAN_BL_POWER,	GPIOF_DIR_OUT, "Backlight power" },
+	{ EGPIO_MAGICIAN_BL_POWER2,	GPIOF_DIR_OUT, "Backlight power 2" },
 };
 
 static int magician_backlight_init(struct device *dev)
@@ -358,6 +379,7 @@ static int magician_backlight_init(struct device *dev)
 
 static int magician_backlight_notify(struct device *dev, int brightness)
 {
+	pr_debug("Brightness = %i\n", brightness);
 	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
 	if (brightness >= 200) {
 		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
@@ -373,28 +395,33 @@ static void magician_backlight_exit(struct device *dev)
 	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
 }
 
+/*
+ * LCD PWM backlight (main)
+ *
+ * MP1521 frequency should be:
+ *	100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
+ */
+
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 0,
-	.max_brightness = 272,
-	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
-	.enable_gpio    = -1,
-	.init           = magician_backlight_init,
-	.notify         = magician_backlight_notify,
-	.exit           = magician_backlight_exit,
+	.max_brightness	= 272,
+	.dft_brightness	= 100,
+	.enable_gpio	= -1,
+	.init		= magician_backlight_init,
+	.notify		= magician_backlight_notify,
+	.exit		= magician_backlight_exit,
 };
 
 static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm0.dev,
-		.platform_data = &backlight_data,
+	.name	= "pwm-backlight",
+	.id	= -1,
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &backlight_data,
 	},
 };
 
 /*
- * LEDs
+ * GPIO LEDs, Phone keys backlight, vibra
  */
 
 static struct gpio_led gpio_leds[] = {
@@ -416,69 +443,32 @@ static struct gpio_led_platform_data gpio_led_info = {
 };
 
 static struct platform_device leds_gpio = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev  = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &gpio_led_info,
 	},
 };
 
-static struct pasic3_led pasic3_leds[] = {
-	{
-		.led = {
-			.name            = "magician:red",
-			.default_trigger = "ds2760-battery.0-charging",
-		},
-		.hw_num = 0,
-		.bit2   = PASIC3_BIT2_LED0,
-		.mask   = PASIC3_MASK_LED0,
-	},
-	{
-		.led = {
-			.name            = "magician:green",
-			.default_trigger = "ds2760-battery.0-charging-or-full",
-		},
-		.hw_num = 1,
-		.bit2   = PASIC3_BIT2_LED1,
-		.mask   = PASIC3_MASK_LED1,
-	},
-	{
-		.led = {
-			.name            = "magician:blue",
-			.default_trigger = "bluetooth",
-		},
-		.hw_num = 2,
-		.bit2   = PASIC3_BIT2_LED2,
-		.mask   = PASIC3_MASK_LED2,
-	},
-};
-
-static struct pasic3_leds_machinfo pasic3_leds_info = {
-	.num_leds   = ARRAY_SIZE(pasic3_leds),
-	.power_gpio = EGPIO_MAGICIAN_LED_POWER,
-	.leds       = pasic3_leds,
-};
-
 /*
  * PASIC3 with DS1WM
  */
 
 static struct resource pasic3_resources[] = {
 	[0] = {
-		.start  = PXA_CS2_PHYS,
+		.start	= PXA_CS2_PHYS,
 		.end	= PXA_CS2_PHYS + 0x1b,
-		.flags  = IORESOURCE_MEM,
+		.flags	= IORESOURCE_MEM,
 	},
 	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
 	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+		.start	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
 static struct pasic3_platform_data pasic3_platform_data = {
-	.led_pdata  = &pasic3_leds_info,
 	.clock_rate = 4000000,
 };
 
@@ -493,25 +483,42 @@ static struct platform_device pasic3 = {
 };
 
 /*
- * USB "Transceiver"
+ * PXA UDC
+ */
+
+static void magician_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
+}
+
+static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
+	.udc_command	= magician_udc_command,
+	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
+};
+
+/*
+ * USB device VBus detection
  */
 
 static struct resource gpio_vbus_resource = {
-	.flags = IORESOURCE_IRQ,
-	.start = IRQ_MAGICIAN_VBUS,
-	.end   = IRQ_MAGICIAN_VBUS,
+	.flags	= IORESOURCE_IRQ,
+	.start	= IRQ_MAGICIAN_VBUS,
+	.end	= IRQ_MAGICIAN_VBUS,
 };
 
 static struct gpio_vbus_mach_info gpio_vbus_info = {
-	.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
-	.gpio_vbus   = EGPIO_MAGICIAN_CABLE_STATE_USB,
+	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
+	.gpio_vbus	= EGPIO_MAGICIAN_CABLE_VBUS,
 };
 
 static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-	.num_resources = 1,
-	.resource      = &gpio_vbus_resource,
+	.name		= "gpio-vbus",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &gpio_vbus_resource,
 	.dev = {
 		.platform_data = &gpio_vbus_info,
 	},
@@ -521,19 +528,60 @@ static struct platform_device gpio_vbus = {
  * External power
  */
 
-static int power_supply_init(struct device *dev)
+static int magician_supply_init(struct device *dev)
+{
+	int ret = -1;
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
+	if (ret) {
+		pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
+		goto err_ac;
+	}
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
+	if (ret) {
+		pr_err("Cannot request cable detection GPIO (%i)\n", ret);
+		goto err_usb;
+	}
+
+	return 0;
+
+err_usb:
+	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
+err_ac:
+	return ret;
+}
+
+static void magician_set_charge(int flags)
 {
-	return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+	if (flags & PDA_POWER_CHARGE_AC) {
+		pr_debug("Charging from AC\n");
+		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+	} else if (flags & PDA_POWER_CHARGE_USB) {
+		pr_debug("Charging from USB\n");
+		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+	} else {
+		pr_debug("Charging disabled\n");
+		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
+	}
 }
 
 static int magician_is_ac_online(void)
 {
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
+	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+		gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
 }
 
-static void power_supply_exit(struct device *dev)
+static int magician_is_usb_online(void)
 {
-	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+		(!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
+}
+
+static void magician_supply_exit(struct device *dev)
+{
+	gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
+	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
 }
 
 static char *magician_supplicants[] = {
@@ -541,38 +589,40 @@ static char *magician_supplicants[] = {
 };
 
 static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = magician_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = magician_supplicants,
-	.num_supplicants = ARRAY_SIZE(magician_supplicants),
+	.init			= magician_supply_init,
+	.exit			= magician_supply_exit,
+	.is_ac_online		= magician_is_ac_online,
+	.is_usb_online		= magician_is_usb_online,
+	.set_charge		= magician_set_charge,
+	.supplied_to		= magician_supplicants,
+	.num_supplicants	= ARRAY_SIZE(magician_supplicants),
 };
 
 static struct resource power_supply_resources[] = {
 	[0] = {
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
+		.name	= "ac",
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+			IORESOURCE_IRQ_LOWEDGE,
+		.start	= IRQ_MAGICIAN_VBUS,
+		.end	= IRQ_MAGICIAN_VBUS,
 	},
 	[1] = {
-		.name  = "usb",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
+		.name	= "usb",
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+			IORESOURCE_IRQ_LOWEDGE,
+		.start	= IRQ_MAGICIAN_VBUS,
+		.end	= IRQ_MAGICIAN_VBUS,
 	},
 };
 
 static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
+	.name	= "pda-power",
+	.id	= -1,
+	.dev = {
 		.platform_data = &power_supply_info,
 	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
+	.resource	= power_supply_resources,
+	.num_resources	= ARRAY_SIZE(power_supply_resources),
 };
 
 /*
@@ -586,11 +636,12 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
 
 static struct regulator_init_data bq24022_init_data = {
 	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+		.max_uA		= 500000,
+		.valid_ops_mask	= REGULATOR_CHANGE_CURRENT |
+			REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(bq24022_consumers),
+	.consumer_supplies	= bq24022_consumers,
 };
 
 static struct gpio bq24022_gpios[] = {
@@ -603,39 +654,85 @@ static struct gpio_regulator_state bq24022_states[] = {
 };
 
 static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
+	.supply_name		= "bq24022",
 
-	.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-	.enable_high = 0,
-	.enabled_at_boot = 0,
+	.enable_gpio		= GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
 
-	.gpios = bq24022_gpios,
-	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
+	.gpios			= bq24022_gpios,
+	.nr_gpios		= ARRAY_SIZE(bq24022_gpios),
 
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
+	.states			= bq24022_states,
+	.nr_states		= ARRAY_SIZE(bq24022_states),
 
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
+	.type			= REGULATOR_CURRENT,
+	.init_data		= &bq24022_init_data,
 };
 
 static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
+	.name	= "gpio-regulator",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &bq24022_info,
 	},
 };
 
 /*
+ * Vcore regulator MAX1587A
+ */
+
+static struct regulator_consumer_supply magician_max1587a_consumers[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data magician_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 700000,
+		.max_uV		= 1475000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= magician_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(magician_max1587a_consumers),
+};
+
+static struct max1586_subdev_data magician_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &magician_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data magician_max1587a_info = {
+	.subdevs     = magician_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
+	/*
+	 * NOTICE measured directly on the PCB (board_id == 0x3a), but
+	 * if R24 is present, it will boost the voltage
+	 * (write 1.475V, get 1.645V and smoke)
+	 */
+	.v3_gain     = MAX1586_GAIN_NO_R24,
+};
+
+static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &magician_max1587a_info,
+	},
+};
+
+/*
  * MMC/SD
  */
 
 static int magician_mci_init(struct device *dev,
-				irq_handler_t detect_irq, void *data)
+	irq_handler_t detect_irq, void *data)
 {
 	return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
-			   "mmc card detect", data);
+		"mmc card detect", data);
 }
 
 static void magician_mci_exit(struct device *dev, void *data)
@@ -644,9 +741,9 @@ static void magician_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask 		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init     		= magician_mci_init,
-	.exit     		= magician_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init			= magician_mci_init,
+	.exit			= magician_mci_exit,
 	.gpio_card_detect	= -1,
 	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
 	.gpio_card_ro_invert	= 1,
@@ -660,47 +757,102 @@ static struct pxamci_platform_data magician_mci_info = {
 
 static struct pxaohci_platform_data magician_ohci_info = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+	/* port1: CSR Bluetooth, port2: OTG with UDC */
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.power_budget	= 0,
+	.power_on_delay = 100,
 };
 
-
 /*
  * StrataFlash
  */
 
+static int magician_flash_init(struct platform_device *pdev)
+{
+	int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
+
+	if (ret) {
+		pr_err("Cannot request flash enable GPIO (%i)\n", ret);
+		return ret;
+	}
+
+	ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
+	if (ret) {
+		pr_err("Cannot set direction for flash enable (%i)\n", ret);
+		gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+	}
+
+	return ret;
+}
+
 static void magician_set_vpp(struct platform_device *pdev, int vpp)
 {
 	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
 }
 
+static void magician_flash_exit(struct platform_device *pdev)
+{
+	gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+}
+
 static struct resource strataflash_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_64M - 1,
-	.flags = IORESOURCE_MEM,
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
 };
 
+static struct mtd_partition magician_flash_parts[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x0,
+		.size		= 0x40000,
+		.mask_flags	= MTD_WRITEABLE, /* EXPERIMENTAL */
+	},
+	{
+		.name		= "Linux Kernel",
+		.offset		= 0x40000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+/*
+ * physmap-flash driver
+ */
+
 static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = magician_set_vpp,
+	.width		= 4,
+	.init		= magician_flash_init,
+	.set_vpp	= magician_set_vpp,
+	.exit		= magician_flash_exit,
+	.parts		= magician_flash_parts,
+	.nr_parts	= ARRAY_SIZE(magician_flash_parts),
 };
 
 static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = &strataflash_resource,
-	.num_resources = 1,
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &strataflash_resource,
+	.num_resources	= 1,
 	.dev = {
 		.platform_data = &strataflash_data,
 	},
 };
 
 /*
- * I2C
+ * PXA I2C main controller
  */
 
 static struct i2c_pxa_platform_data i2c_info = {
-	.fast_mode = 1,
+	/* OV9640 I2C device doesn't support fast mode */
+	.fast_mode	= 0,
+};
+
+/*
+ * PXA I2C power controller
+ */
+
+static struct i2c_pxa_platform_data magician_i2c_power_info = {
+	.fast_mode	= 1,
 };
 
 /*
@@ -720,12 +872,13 @@ static struct platform_device *devices[] __initdata = {
 };
 
 static struct gpio magician_global_gpios[] = {
-	{ GPIO13_MAGICIAN_CPLD_IRQ,   GPIOF_IN, "CPLD_IRQ" },
+	{ GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
 	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
-	{ GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
-	{ GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
-	{ GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
-	{ GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
+
+	/* NOTICE valid LCD init sequence */
+	{ GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
+	{ GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
+	{ GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
 };
 
 static void __init magician_init(void)
@@ -737,44 +890,55 @@ static void __init magician_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
 	if (err)
-		pr_err("magician: Failed to request GPIOs: %d\n", err);
+		pr_err("magician: Failed to request global GPIOs: %d\n", err);
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
 
-	platform_add_devices(ARRAY_AND_SIZE(devices));
+	pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
 
 	pxa_set_ficp_info(&magician_ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
+	pxa27x_set_i2c_power_info(&magician_i2c_power_info);
 	pxa_set_i2c_info(&i2c_info);
+
+	i2c_register_board_info(1,
+		ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+
 	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
+	pxa_set_udc_info(&magician_udc_info);
 
 	/* Check LCD type we have */
 	cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
 	if (cpld) {
-		u8 board_id = __raw_readb(cpld+0x14);
+		u8 board_id = __raw_readb(cpld + 0x14);
+
 		iounmap(cpld);
 		system_rev = board_id & 0x7;
 		lcd_select = board_id & 0x8;
 		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
 		if (lcd_select && (system_rev < 3))
+			/* NOTICE valid LCD init sequence */
 			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
-			                 GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
-		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
+				GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
+		pxa_set_fb_info(NULL,
+			lcd_select ? &samsung_info : &toppoly_info);
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
-}
 
+	regulator_register_always_on(0, "power", pwm_backlight_supply,
+		ARRAY_SIZE(pwm_backlight_supply), 5000000);
+
+	platform_add_devices(ARRAY_AND_SIZE(devices));
+}
 
 MACHINE_START(MAGICIAN, "HTC Magician")
-	.atag_offset = 0x100,
-	.map_io = pxa27x_map_io,
-	.nr_irqs = MAGICIAN_NR_IRQS,
-	.init_irq = pxa27x_init_irq,
-	.handle_irq = pxa27x_handle_irq,
-	.init_machine = magician_init,
+	.atag_offset	= 0x100,
+	.map_io		= pxa27x_map_io,
+	.nr_irqs	= MAGICIAN_NR_IRQS,
+	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_machine	= magician_init,
 	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 2c0658cf6..40964069a 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -45,7 +46,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
@@ -248,11 +249,14 @@ static struct platform_device mst_flash_device[2] = {
 };
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup mainstone_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data mainstone_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -266,9 +270,16 @@ static struct platform_device mainstone_backlight_device = {
 
 static void __init mainstone_backlight_register(void)
 {
-	int ret = platform_device_register(&mainstone_backlight_device);
-	if (ret)
+	int ret;
+
+	pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
+
+	ret = platform_device_register(&mainstone_backlight_device);
+	if (ret) {
 		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
+		pwm_remove_table(mainstone_pwm_lookup,
+				 ARRAY_SIZE(mainstone_pwm_lookup));
+	}
 }
 #else
 #define mainstone_backlight_register()	do { } while (0)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/mfp-pxa25x.h
index cafadc33d..1c59d4b3b 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/mfp-pxa25x.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_MFP_PXA25X_H
 #define __ASM_ARCH_MFP_PXA25X_H
 
-#include <mach/mfp-pxa2xx.h>
+#include "mfp-pxa2xx.h"
 
 /* GPIO */
 #define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/mfp-pxa27x.h
index b6132aa95..9fe5601ce 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/mfp-pxa27x.h
@@ -8,7 +8,7 @@
  * specific controller, and this should work in most cases.
  */
 
-#include <mach/mfp-pxa2xx.h>
+#include "mfp-pxa2xx.h"
 
 /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
  * bit is set, regardless of the GPIO configuration
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 666b78972..3732aec76 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -21,7 +21,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
+#include "mfp-pxa2xx.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h
index cbf51ae81..cbf51ae81 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.h
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/mfp-pxa300.h
index 4e1287070..5ee51e283 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/mfp-pxa300.h
@@ -15,7 +15,7 @@
 #ifndef __ASM_ARCH_MFP_PXA300_H
 #define __ASM_ARCH_MFP_PXA300_H
 
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/mfp-pxa320.h
index 3ce4682ea..e8797cfc7 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/mfp-pxa320.h
@@ -15,7 +15,7 @@
 #ifndef __ASM_ARCH_MFP_PXA320_H
 #define __ASM_ARCH_MFP_PXA320_H
 
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 89863a01e..994edc015 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -20,7 +20,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 #include <mach/pxa3xx-regs.h>
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h
index d375195d9..d375195d9 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.h
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/mfp-pxa930.h
index 04f7c9704..113967bee 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/mfp-pxa930.h
@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_MFP_PXA9xx_H
 #define __ASM_ARCH_MFP_PXA9xx_H
 
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 29997bde2..38a96a193 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -26,6 +26,7 @@
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/rtc.h>
 #include <linux/leds.h>
@@ -46,19 +47,19 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
-#include <mach/regs-rtc.h>
+#include "pxa27x.h"
+#include "regs-rtc.h"
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
-#include <linux/platform_data/camera-pxa.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
+#include <linux/platform_data/media/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/smemc.h>
 #include <media/soc_camera.h>
 
-#include <mach/mioa701.h>
+#include "mioa701.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -181,12 +182,15 @@ static unsigned long mioa701_pin_config[] = {
 	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
 };
 
+static struct pwm_lookup mioa701_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
+		   PWM_POLARITY_NORMAL),
+};
+
 /* LCD Screen and Backlight */
 static struct platform_pwm_backlight_data mioa701_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 50,
-	.pwm_period_ns	= 4000 * 1024,	/* Fl = 250kHz */
 	.enable_gpio	= -1,
 };
 
@@ -678,6 +682,7 @@ MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
 MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
+MIO_SIMPLE_DEV(wm9713_acodec,	  "wm9713-codec",   NULL);
 MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
 MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
 
@@ -685,6 +690,7 @@ static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
 	&mioa701_backlight,
 	&mioa701_led,
+	&wm9713_acodec,
 	&pxa2xx_pcm,
 	&mioa701_sound,
 	&power_dev,
@@ -751,6 +757,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
+	pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/mioa701.h
index e57f5c724..e57f5c724 100644
--- a/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/arch/arm/mach-pxa/mioa701.h
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 14f6aaf8f..4d89029e5 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include "generic.h"
 
 static void isp116x_pfm_delay(struct device *dev, int delay)
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index d04ed4961..9a22ae0ad 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -29,9 +29,9 @@
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa320.h>
+#include "pxa320.h"
 
-#include <mach/mxm8x10.h>
+#include "mxm8x10.h"
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/mxm8x10.h b/arch/arm/mach-pxa/mxm8x10.h
index ffa15665a..ffa15665a 100644
--- a/arch/arm/mach-pxa/include/mach/mxm8x10.h
+++ b/arch/arm/mach-pxa/mxm8x10.h
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index e54a296fb..e5ae99db1 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -15,6 +15,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
@@ -27,14 +28,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -270,6 +271,11 @@ void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palm27x_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int palm_bl_power;
 static int palm_lcd_power;
 
@@ -318,10 +324,8 @@ static void palm27x_backlight_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data palm27x_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 0xfe,
 	.dft_brightness	= 0x7e,
-	.pwm_period_ns	= 3500 * 1024,
 	.enable_gpio	= -1,
 	.init		= palm27x_backlight_init,
 	.notify		= palm27x_backlight_notify,
@@ -340,6 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd)
 {
 	palm_bl_power	= bl;
 	palm_lcd_power	= lcd;
+	pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
 	platform_device_register(&palm27x_backlight);
 }
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/palm27x.h
index d4eac3d6f..d4eac3d6f 100644
--- a/arch/arm/mach-pxa/include/mach/palm27x.h
+++ b/arch/arm/mach-pxa/palm27x.h
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index cf210b11f..980f2847f 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -32,7 +32,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <mach/palmld.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -40,7 +40,7 @@
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 3ed9b0294..876144aa3 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -33,16 +33,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
-#include <mach/palmt5.h>
+#include "palmt5.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/palmt5.h
index e342c5921..f850cc9de 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/palmt5.h
@@ -15,7 +15,7 @@
 #ifndef _INCLUDE_PALMT5_H_
 #define _INCLUDE_PALMT5_H_
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /** HERE ARE GPIOs **/
 
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 7691c974c..18946594a 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/input.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/input/matrix_keypad.h>
@@ -31,13 +32,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
 #include <mach/palmtc.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/udc.h>
+#include "udc.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -166,11 +167,14 @@ static inline void palmtc_keys_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palmtc_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data palmtc_backlight_data = {
-	.pwm_id		= 1,
 	.max_brightness	= PALMTC_MAX_INTENSITY,
 	.dft_brightness	= PALMTC_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTC_PERIOD_NS,
 	.enable_gpio	= GPIO_NR_PALMTC_BL_POWER,
 };
 
@@ -184,6 +188,7 @@ static struct platform_device palmtc_backlight = {
 
 static void __init palmtc_pwm_init(void)
 {
+	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
 	platform_device_register(&palmtc_backlight);
 }
 #else
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 956fd24ee..36b46141a 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -21,6 +21,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
@@ -31,13 +32,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
-#include <mach/palmte2.h>
+#include "palmte2.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
 
 #include "generic.h"
@@ -138,6 +139,11 @@ static struct platform_device palmte2_pxa_keys = {
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+static struct pwm_lookup palmte2_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
+		   PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
+};
+
 static struct gpio palmte_bl_gpios[] = {
 	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
 	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
@@ -161,10 +167,8 @@ static void palmte2_backlight_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data palmte2_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= PALMTE2_MAX_INTENSITY,
 	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTE2_PERIOD_NS,
 	.enable_gpio	= -1,
 	.init		= palmte2_backlight_init,
 	.notify		= palmte2_backlight_notify,
@@ -355,6 +359,7 @@ static void __init palmte2_init(void)
 	pxa_set_ac97_info(&palmte2_ac97_pdata);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
 
+	pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/palmte2.h
index f89e989a7..f89e989a7 100644
--- a/arch/arm/mach-pxa/include/mach/palmte2.h
+++ b/arch/arm/mach-pxa/palmte2.h
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index d8b937c87..4cc05ecce 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -31,20 +31,20 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <mach/audio.h>
-#include <mach/palmtreo.h>
+#include "palmtreo.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa2xx-regs.h>
 #include <linux/platform_data/asoc-palm27x.h>
-#include <linux/platform_data/camera-pxa.h>
-#include <mach/palm27x.h>
+#include <linux/platform_data/media/camera-pxa.h>
+#include "palm27x.h"
 
 #include <sound/pxa2xx-lib.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/palmtreo.h
index 714b65743..714b65743 100644
--- a/arch/arm/mach-pxa/include/mach/palmtreo.h
+++ b/arch/arm/mach-pxa/palmtreo.h
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 83f830dd8..36646975b 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -37,16 +37,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <mach/palmtx.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -250,7 +250,7 @@ static inline void palmtx_keys_init(void) {}
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	char __iomem *nandaddr = this->IO_ADDR_W;
 
 	if (cmd == NAND_CMD_NONE)
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 1a35ddf21..9c308de15 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -37,19 +37,19 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
-#include <mach/palmz72.h>
+#include "palmz72.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
-#include <mach/pm.h>
-#include <linux/platform_data/camera-pxa.h>
+#include "pm.h"
+#include <linux/platform_data/media/camera-pxa.h>
 
 #include <media/soc_camera.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/palmz72.h
index 0d4700a79..0d4700a79 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/palmz72.h
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 69918c7e3..ccca9f757 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -30,8 +30,8 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pxa27x.h>
-#include <mach/pcm027.h>
+#include "pxa27x.h"
+#include "pcm027.h"
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/pcm027.h
index 86ebd7b6c..047cdf234 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/pcm027.h
@@ -23,7 +23,7 @@
  * Definitions of CPU card resources only
  */
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /* phyCORE-PXA270 (PCM027) Interrupts */
 #define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 2897da2a5..0bd5959ef 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -24,18 +24,19 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
-#include <media/mt9v022.h>
+#include <media/i2c/mt9v022.h>
 #include <media/soc_camera.h>
 
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 #include <asm/mach/map.h>
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pcm990_baseboard.h>
+#include "pcm990_baseboard.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
@@ -148,11 +149,14 @@ static struct pxafb_mach_info pcm990_fbinfo __initdata = {
 };
 #endif
 
+static struct pwm_lookup pcm990_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data pcm990_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -284,8 +288,9 @@ static struct irq_chip pcm990_irq_chip = {
 	.irq_unmask	= pcm990_unmask_irq,
 };
 
-static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void pcm990_irq_handler(struct irq_desc *desc)
 {
+	unsigned int irq;
 	unsigned long pending;
 
 	pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
@@ -311,7 +316,7 @@ static void __init pcm990_init_irq(void)
 	for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
 		irq_set_chip_and_handler(irq, &pcm990_irq_chip,
 					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	/* disable all Interrupts */
@@ -541,6 +546,7 @@ void __init pcm990_baseboard_init(void)
 #ifndef CONFIG_PCM990_DISPLAY_NONE
 	pxa_set_fb_info(NULL, &pcm990_fbinfo);
 #endif
+	pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
 	platform_device_register(&pcm990_backlight_device);
 
 	/* MMC */
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h
index 7e544c149..79d35adfa 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/pcm990_baseboard.h
@@ -19,8 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <mach/pcm027.h>
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include "pcm027.h"
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /*
  * definitions relevant only when the PCM-990
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 37178a855..388463b99 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,7 +16,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 
-#include <mach/pm.h>
+#include "pm.h"
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
 static unsigned long *sleep_save;
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/pm.h
index 51558bcee..3aab90d8d 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/pm.h
@@ -29,6 +29,9 @@ extern int pxa_pm_enter(suspend_state_t state);
 extern int pxa_pm_prepare(void);
 extern void pxa_pm_finish(void);
 
+extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+extern int pxa3xx_finish_suspend(unsigned long);
+
 /* NOTE: this is for PM debugging on Lubbock,  it's really a big
  * ugly, but let's keep the crap minimum here, instead of direct
  * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 195b1121c..62a119137 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <mach/poodle.h>
 #include <linux/platform_data/video-pxafb.h>
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index 7e0e5bd0c..f128133a8 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -19,42 +19,18 @@
 #include "generic.h"
 
 #ifdef CONFIG_PXA3xx
-static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40100000, "pxa2xx-uart.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40200000, "pxa2xx-uart.1", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40700000, "pxa2xx-uart.2", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x41600000, "pxa2xx-uart.3", NULL),
-	OF_DEV_AUXDATA("marvell,pxa-mmc",	0x41100000, "pxa2xx-mci.0", NULL),
-	OF_DEV_AUXDATA("intel,pxa3xx-gpio",	0x40e00000, "pxa3xx-gpio", NULL),
-	OF_DEV_AUXDATA("marvell,pxa-ohci",	0x4c000000, "pxa27x-ohci", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-i2c",		0x40301680, "pxa2xx-i2c.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pwri2c",		0x40f500c0, "pxa3xx-i2c.1", NULL),
-	OF_DEV_AUXDATA("marvell,pxa3xx-nand",	0x43100000, "pxa3xx-nand", NULL),
-	{}
-};
-
-static void __init pxa3xx_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     pxa3xx_auxdata_lookup, NULL);
-}
-
-static const char *pxa3xx_dt_board_compat[] __initdata = {
+static const char *const pxa3xx_dt_board_compat[] __initconst = {
 	"marvell,pxa300",
 	"marvell,pxa310",
 	"marvell,pxa320",
 	NULL,
 };
-#endif
 
-#ifdef CONFIG_PXA3xx
 DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_dt_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
-	.init_machine	= pxa3xx_dt_init,
 	.dt_compat	= pxa3xx_dt_board_compat,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 23a90c62e..823504f48 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -30,9 +30,9 @@
 #include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/reset.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/dma.h>
 #include <mach/smemc.h>
 
@@ -206,6 +206,7 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
+		pxa2xx_set_dmac_info(16, 40);
 		pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 		ret = platform_add_devices(pxa25x_devices,
 					   ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h
index 5a341752e..2011e8da0 100644
--- a/arch/arm/mach-pxa/include/mach/pxa25x.h
+++ b/arch/arm/mach-pxa/pxa25x.h
@@ -3,7 +3,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include "mfp-pxa25x.h"
 #include <mach/irqs.h>
 
 #endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/pxa27x-udc.h
index 4cf28f670..4cf28f670 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
+++ b/arch/arm/mach-pxa/pxa27x-udc.h
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index b5abdeb5b..2eaa341dd 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -28,10 +28,10 @@
 #include <asm/irq.h>
 #include <asm/suspend.h>
 #include <mach/irqs.h>
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/reset.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/dma.h>
 #include <mach/smemc.h>
 
@@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
  */
 static unsigned int pwrmode = PWRMODE_SLEEP;
 
-int __init pxa27x_set_pwrmode(unsigned int mode)
+int pxa27x_set_pwrmode(unsigned int mode)
 {
 	switch (mode) {
 	case PWRMODE_SLEEP:
@@ -132,7 +132,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mra %Q0, %R0, acc0" : "=r" (acc0));
 #endif
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
@@ -151,7 +152,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		cpu_suspend(pwrmode, pxa27x_finish_suspend);
 #ifndef CONFIG_IWMMXT
-		asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+		asm volatile(".arch_extension xscale\n\t"
+			     "mar acc0, %Q0, %R0" : "=r" (acc0));
 #endif
 		break;
 	}
@@ -282,7 +284,6 @@ static struct platform_device *devices[] __initdata = {
 	&pxa_device_asoc_ssp2,
 	&pxa_device_asoc_ssp3,
 	&pxa_device_asoc_platform,
-	&sa1100_device_rtc,
 	&pxa_device_rtc,
 	&pxa27x_device_ssp1,
 	&pxa27x_device_ssp2,
@@ -310,6 +311,7 @@ static int __init pxa27x_init(void)
 		if (!of_have_populated_dt()) {
 			pxa_register_device(&pxa27x_device_gpio,
 					    &pxa27x_gpio_info);
+			pxa2xx_set_dmac_info(32, 75);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
 		}
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h
index 599b925a6..075131d83 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/pxa27x.h
@@ -4,7 +4,7 @@
 #include <linux/suspend.h>
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include "mfp-pxa27x.h"
 #include <mach/irqs.h>
 
 #define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
@@ -19,7 +19,7 @@
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
 
-extern int __init pxa27x_set_pwrmode(unsigned int mode);
+extern int pxa27x_set_pwrmode(unsigned int mode);
 extern void pxa27x_cpu_pm_enter(suspend_state_t state);
 
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 447dcbb22..6b5e566f5 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -17,7 +17,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include "mfp-pxa25x.h"
 #include <mach/reset.h>
 #include <linux/platform_data/irda-pxaficp.h>
 
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 28c5b5686..df83b1bdd 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/pxa300.h>
+#include "pxa300.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/pxa300.h
index 733b6412c..59fa41025 100644
--- a/arch/arm/mach-pxa/include/mach/pxa300.h
+++ b/arch/arm/mach-pxa/pxa300.h
@@ -1,7 +1,7 @@
 #ifndef __MACH_PXA300_H
 #define __MACH_PXA300_H
 
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa300.h>
+#include "pxa3xx.h"
+#include "mfp-pxa300.h"
 
 #endif /* __MACH_PXA300_H */
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 2f55bb4b9..a26eec57e 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/pxa320.h>
+#include "pxa320.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/pxa320.h
index b6204e470..b9e5115a1 100644
--- a/arch/arm/mach-pxa/include/mach/pxa320.h
+++ b/arch/arm/mach-pxa/pxa320.h
@@ -1,8 +1,8 @@
 #ifndef __MACH_PXA320_H
 #define __MACH_PXA320_H
 
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa320.h>
+#include "pxa3xx.h"
+#include "mfp-pxa320.h"
 
 #endif /* __MACH_PXA320_H */
 
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index 1c85275cb..eba595fac 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -26,7 +26,7 @@
 #include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
-#include <mach/regs-u2d.h>
+#include "regs-u2d.h"
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
 
 struct pxa3xx_u2d_ulpi {
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index bd4cbef15..3c9184d1d 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,7 +30,7 @@
 #include <mach/pxa3xx-regs.h>
 #include <mach/reset.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/dma.h>
 #include <mach/smemc.h>
 #include <mach/irqs.h>
@@ -42,6 +42,14 @@
 #define PECR_IS(n)	((1 << ((n) * 2)) << 29)
 
 extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
+
+/*
+ * NAND NFC: DFI bus arbitration subset
+ */
+#define NDCR			(*(volatile u32 __iomem*)(NAND_VIRT + 0))
+#define NDCR_ND_ARB_EN		(1 << 12)
+#define NDCR_ND_ARB_CNTL	(1 << 19)
+
 #ifdef CONFIG_PM
 
 #define ISRAM_START	0x5c000000
@@ -60,7 +68,6 @@ static unsigned long wakeup_src;
  */
 static void pxa3xx_cpu_standby(unsigned int pwrmode)
 {
-	extern const char pm_enter_standby_start[], pm_enter_standby_end[];
 	void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
 
 	memcpy_toio(sram + 0x8000, pm_enter_standby_start,
@@ -95,11 +102,10 @@ static void pxa3xx_cpu_pm_suspend(void)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mra %Q0, %R0, acc0" : "=r" (acc0));
 #endif
 
-	extern int pxa3xx_finish_suspend(unsigned long);
-
 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
 	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
 	CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
@@ -125,7 +131,8 @@ static void pxa3xx_cpu_pm_suspend(void)
 	AD3ER = 0;
 
 #ifndef CONFIG_IWMMXT
-	asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mar acc0, %Q0, %R0" : "=r" (acc0));
 #endif
 }
 
@@ -325,7 +332,7 @@ static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
 	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
 		irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip,
 					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST);
 	}
 
 	pxa_ext_wakeup_chip.irq_set_wake = fn;
@@ -362,7 +369,12 @@ static struct map_desc pxa3xx_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(PXA3XX_SMEMC_BASE),
 		.length		= SMEMC_SIZE,
 		.type		= MT_DEVICE
-	}
+	}, {
+		.virtual	= (unsigned long)NAND_VIRT,
+		.pfn		= __phys_to_pfn(NAND_PHYS),
+		.length		= NAND_SIZE,
+		.type		= MT_DEVICE
+	},
 };
 
 void __init pxa3xx_map_io(void)
@@ -394,7 +406,6 @@ static struct platform_device *devices[] __initdata = {
 	&pxa_device_asoc_ssp3,
 	&pxa_device_asoc_ssp4,
 	&pxa_device_asoc_platform,
-	&sa1100_device_rtc,
 	&pxa_device_rtc,
 	&pxa3xx_device_ssp1,
 	&pxa3xx_device_ssp2,
@@ -420,6 +431,13 @@ static int __init pxa3xx_init(void)
 		 */
 		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
 
+		/*
+		 * Disable DFI bus arbitration, to prevent a system bus lock if
+		 * somebody disables the NAND clock (unused clock) while this
+		 * bit remains set.
+		 */
+		NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL;
+
 		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
 
@@ -431,6 +449,7 @@ static int __init pxa3xx_init(void)
 		if (of_have_populated_dt())
 			return 0;
 
+		pxa2xx_set_dmac_info(32, 100);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 		if (ret)
 			return ret;
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h
index b4143fb66..b4143fb66 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx.h
+++ b/arch/arm/mach-pxa/pxa3xx.h
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index ab624487c..da912be6e 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -17,7 +17,7 @@
 #include <linux/gpio-pxa.h>
 #include <linux/platform_device.h>
 
-#include <mach/pxa930.h>
+#include "pxa930.h"
 
 #include "devices.h"
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/pxa930.h
index 190363b98..4eceb0297 100644
--- a/arch/arm/mach-pxa/include/mach/pxa930.h
+++ b/arch/arm/mach-pxa/pxa930.h
@@ -1,7 +1,7 @@
 #ifndef __MACH_PXA930_H
 #define __MACH_PXA930_H
 
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
+#include "pxa3xx.h"
+#include "mfp-pxa930.h"
 
 #endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
index 2385052b0..e362f865f 100644
--- a/arch/arm/mach-pxa/pxa_cplds_irqs.c
+++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -41,30 +41,35 @@ static irqreturn_t cplds_irq_handler(int in_irq, void *d)
 	unsigned long pending;
 	unsigned int bit;
 
-	pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
-	for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
-		generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+	do {
+		pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+		for_each_set_bit(bit, &pending, CPLDS_NB_IRQ) {
+			generic_handle_irq(irq_find_mapping(fpga->irqdomain,
+							    bit));
+		}
+	} while (pending);
 
 	return IRQ_HANDLED;
 }
 
-static void cplds_irq_mask_ack(struct irq_data *d)
+static void cplds_irq_mask(struct irq_data *d)
 {
 	struct cplds *fpga = irq_data_get_irq_chip_data(d);
 	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int set, bit = BIT(cplds_irq);
+	unsigned int bit = BIT(cplds_irq);
 
 	fpga->irq_mask &= ~bit;
 	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
-	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
 }
 
 static void cplds_irq_unmask(struct irq_data *d)
 {
 	struct cplds *fpga = irq_data_get_irq_chip_data(d);
 	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int bit = BIT(cplds_irq);
+	unsigned int set, bit = BIT(cplds_irq);
+
+	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
 
 	fpga->irq_mask |= bit;
 	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
@@ -72,7 +77,8 @@ static void cplds_irq_unmask(struct irq_data *d)
 
 static struct irq_chip cplds_irq_chip = {
 	.name		= "pxa_cplds",
-	.irq_mask_ack	= cplds_irq_mask_ack,
+	.irq_ack	= cplds_irq_mask,
+	.irq_mask	= cplds_irq_mask,
 	.irq_unmask	= cplds_irq_unmask,
 	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
 };
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 88f70c37a..e216433b5 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -18,17 +18,19 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/property.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/input.h>
-#include <linux/rotary_encoder.h>
 #include <linux/gpio_keys.h>
 #include <linux/input/eeti_ts.h>
 #include <linux/leds.h>
 #include <linux/w1-gpio.h>
 #include <linux/sched.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -48,7 +50,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa300.h>
+#include "pxa300.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -365,22 +367,27 @@ static struct pxaohci_platform_data raumfeld_ohci_info = {
  * Rotary encoder input device
  */
 
-static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
-	.steps		= 24,
-	.axis		= REL_X,
-	.relative_axis	= 1,
-	.gpio_a		= GPIO_VOLENC_A,
-	.gpio_b		= GPIO_VOLENC_B,
-	.inverted_a	= 1,
-	.inverted_b	= 0,
+static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
+	.dev_id = "rotary-encoder.0",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-0",
+				GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-0",
+				GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct property_entry raumfeld_rotary_properties[] = {
+	PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
+	PROPERTY_ENTRY_INTEGER("linux,axis",			  u32, REL_X),
+	PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis",	  u32, 1),
+	{ },
 };
 
 static struct platform_device rotary_encoder_device = {
 	.name		= "rotary-encoder",
 	.id		= 0,
-	.dev		= {
-		.platform_data = &raumfeld_rotary_encoder_info,
-	}
 };
 
 /**
@@ -507,7 +514,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
 	.ext_pullup_enable_pin	= -EINVAL,
 };
 
-struct platform_device raumfeld_w1_gpio_device = {
+static struct platform_device raumfeld_w1_gpio_device = {
 	.name	= "w1-gpio",
 	.dev	= {
 		.platform_data = &w1_gpio_platform_data
@@ -531,13 +538,15 @@ static void __init raumfeld_w1_init(void)
  * Framebuffer device
  */
 
+static struct pwm_lookup raumfeld_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
 /* PWM controlled backlight */
 static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	/* 10000 ns = 10 ms ^= 100 kHz */
-	.pwm_period_ns	= 10000,
 	.enable_gpio	= -1,
 };
 
@@ -618,6 +627,8 @@ static void __init raumfeld_lcd_init(void)
 	} else {
 		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
 		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		pwm_add_table(raumfeld_pwm_lookup,
+			      ARRAY_SIZE(raumfeld_pwm_lookup));
 		platform_device_register(&raumfeld_pwm_backlight_device);
 	}
 
@@ -629,7 +640,7 @@ static void __init raumfeld_lcd_init(void)
  * SPI devices
  */
 
-struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
 	.sck		= GPIO_SPI_CLK,
 	.mosi		= GPIO_SPI_MOSI,
 	.miso		= GPIO_SPI_MISO,
@@ -848,7 +859,7 @@ static void __init raumfeld_power_init(void)
 static struct regulator_consumer_supply audio_va_consumer_supply =
 	REGULATOR_SUPPLY("va", "0-0048");
 
-struct regulator_init_data audio_va_initdata = {
+static struct regulator_init_data audio_va_initdata = {
 	.consumer_supplies = &audio_va_consumer_supply,
 	.num_consumer_supplies = 1,
 	.constraints = {
@@ -880,7 +891,7 @@ static struct regulator_consumer_supply audio_dummy_supplies[] = {
 	REGULATOR_SUPPLY("vlc", "0-0048"),
 };
 
-struct regulator_init_data audio_dummy_initdata = {
+static struct regulator_init_data audio_dummy_initdata = {
 	.consumer_supplies = audio_dummy_supplies,
 	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
 	.constraints = {
@@ -928,7 +939,7 @@ static struct regulator_init_data vcc_mmc_init_data = {
 	.num_consumer_supplies = 1,
 };
 
-struct max8660_subdev_data max8660_v6_subdev_data = {
+static struct max8660_subdev_data max8660_v6_subdev_data = {
 	.id		= MAX8660_V6,
 	.name		= "vmmc",
 	.platform_data	= &vcc_mmc_init_data,
@@ -1041,12 +1052,17 @@ static void __init raumfeld_common_init(void)
 	i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
 }
 
-static void __init raumfeld_controller_init(void)
+static void __init __maybe_unused raumfeld_controller_init(void)
 {
 	int ret;
 
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+
+	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+	device_add_properties(&rotary_encoder_device.dev,
+			      raumfeld_rotary_properties);
 	platform_device_register(&rotary_encoder_device);
+
 	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
 	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
 
@@ -1062,7 +1078,7 @@ static void __init raumfeld_controller_init(void)
 	raumfeld_w1_init();
 }
 
-static void __init raumfeld_connector_init(void)
+static void __init __maybe_unused raumfeld_connector_init(void)
 {
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
 	spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
@@ -1074,13 +1090,17 @@ static void __init raumfeld_connector_init(void)
 	raumfeld_common_init();
 }
 
-static void __init raumfeld_speaker_init(void)
+static void __init __maybe_unused raumfeld_speaker_init(void)
 {
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
 	spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
 	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
 
 	platform_device_register(&smc91x_device);
+
+	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+	device_add_properties(&rotary_encoder_device.dev,
+			      raumfeld_rotary_properties);
 	platform_device_register(&rotary_encoder_device);
 
 	raumfeld_audio_init();
diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/regs-rtc.h
index f0e4a589b..f0e4a589b 100644
--- a/arch/arm/mach-pxa/include/mach/regs-rtc.h
+++ b/arch/arm/mach-pxa/regs-rtc.h
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h
index c15c0c57d..c15c0c57d 100644
--- a/arch/arm/mach-pxa/include/mach/regs-u2d.h
+++ b/arch/arm/mach-pxa/regs-u2d.h
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 710c493ea..1414b5f29 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -31,7 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa930.h>
+#include "pxa930.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 051a6555c..249b7bd5f 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -27,10 +27,10 @@
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl_pm.h>
+#include "regs-rtc.h"
+#include "sharpsl_pm.h"
 
 /*
  * Constants
@@ -744,7 +744,7 @@ static int sharpsl_off_charge_battery(void)
 		time = RCNR;
 		while (1) {
 			/* Check if any wakeup event had occurred */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			if (sharpsl_pm.machinfo->charger_wakeup())
 				return 0;
 			/* Check for timeout */
 			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
@@ -841,11 +841,9 @@ static int sharpsl_pm_probe(struct platform_device *pdev)
 	sharpsl_pm.charge_mode = CHRG_OFF;
 	sharpsl_pm.flags = 0;
 
-	init_timer(&sharpsl_pm.ac_timer);
-	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+	setup_timer(&sharpsl_pm.ac_timer, sharpsl_ac_timer, 0UL);
 
-	init_timer(&sharpsl_pm.chrg_full_timer);
-	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+	setup_timer(&sharpsl_pm.chrg_full_timer, sharpsl_chrg_full_timer, 0UL);
 
 	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
 
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h
index 905be6755..fa75b6df8 100644
--- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/sharpsl_pm.h
@@ -34,7 +34,7 @@ struct sharpsl_charger_machinfo {
 #define SHARPSL_STATUS_LOCK     5
 #define SHARPSL_STATUS_CHRGFULL 6
 #define SHARPSL_STATUS_FATAL    7
-	unsigned long (*charger_wakeup)(void);
+	bool (*charger_wakeup)(void);
 	int (*should_wakeup)(unsigned int resume_on_alarm);
 	void (*backlight_limit)(int);
 	int (*backlight_get_status) (void);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f4e2e2719..2c150bfc0 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
@@ -40,15 +41,15 @@
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <mach/reset.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/spitz.h>
-#include <mach/sharpsl_pm.h>
+#include "sharpsl_pm.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
@@ -201,7 +202,7 @@ static void __init spitz_scoop_init(void)
 }
 
 /* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
+static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
 {
 	unsigned short cpr;
 	unsigned long flags;
@@ -464,7 +465,7 @@ static struct gpio_led spitz_gpio_leds[] = {
 	},
 	{
 		.name			= "spitz:green:hddactivity",
-		.default_trigger	= "ide-disk",
+		.default_trigger	= "disk-activity",
 		.gpio			= SPITZ_GPIO_LED_GREEN,
 	},
 };
@@ -763,14 +764,49 @@ static struct nand_bbt_descr spitz_nand_bbt = {
 	.pattern	= scan_ff_pattern
 };
 
-static struct nand_ecclayout akita_oobinfo = {
-	.oobfree	= { {0x08, 0x09} },
-	.eccbytes	= 24,
-	.eccpos		= {
-			0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
-			0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-			0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
-	},
+static int akita_ooblayout_ecc(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	if (section > 12)
+		return -ERANGE;
+
+	switch (section % 3) {
+	case 0:
+		oobregion->offset = 5;
+		oobregion->length = 1;
+		break;
+
+	case 1:
+		oobregion->offset = 1;
+		oobregion->length = 3;
+		break;
+
+	case 2:
+		oobregion->offset = 6;
+		oobregion->length = 2;
+		break;
+	}
+
+	oobregion->offset += (section / 3) * 0x10;
+
+	return 0;
+}
+
+static int akita_ooblayout_free(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 8;
+	oobregion->length = 9;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops akita_ooblayout_ops = {
+	.ecc = akita_ooblayout_ecc,
+	.free = akita_ooblayout_free,
 };
 
 static struct sharpsl_nand_platform_data spitz_nand_pdata = {
@@ -804,11 +840,11 @@ static void __init spitz_nand_init(void)
 	} else if (machine_is_akita()) {
 		spitz_nand_partitions[1].size = 58 * 1024 * 1024;
 		spitz_nand_bbt.len = 1;
-		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+		spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
 	} else if (machine_is_borzoi()) {
 		spitz_nand_partitions[1].size = 32 * 1024 * 1024;
 		spitz_nand_bbt.len = 1;
-		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+		spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
 	}
 
 	platform_device_register(&spitz_nand_device);
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index e191f9996..4e64a1402 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -25,8 +25,8 @@
 #include <mach/hardware.h>
 
 #include <mach/spitz.h>
-#include <mach/pxa27x.h>
-#include <mach/sharpsl_pm.h>
+#include "pxa27x.h"
+#include "sharpsl_pm.h"
 
 #include "generic.h"
 
@@ -165,13 +165,10 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 	return is_resume;
 }
 
-static unsigned long spitz_charger_wakeup(void)
+static bool spitz_charger_wakeup(void)
 {
-	unsigned long ret;
-	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
-		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| gpio_get_value(SPITZ_GPIO_SYNC));
-	return ret;
+	return !gpio_get_value(SPITZ_GPIO_KEY_INT) ||
+		gpio_get_value(SPITZ_GPIO_SYNC);
 }
 
 unsigned long spitzpm_read_devdata(int type)
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de54243..702f4f14b 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -43,10 +43,10 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include <mach/smemc.h>
 
 #include <linux/spi/spi.h>
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index a71da84e7..4b38e821a 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -18,12 +18,13 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/smc91x.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa930.h>
+#include "pxa930.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 
@@ -168,21 +169,24 @@ static inline void tavorevb_init_keypad(void) {}
 #endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup tavorevb_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
 	[0] = {
 		/* primary backlight */
-		.pwm_id		= 2,
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
 		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* secondary backlight */
-		.pwm_id		= 0,
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
 		.enable_gpio	= -1,
 	},
 };
@@ -470,6 +474,7 @@ static struct pxafb_mach_info tavorevb_lcd_info = {
 
 static void __init tavorevb_init_lcd(void)
 {
+	pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup));
 	platform_device_register(&tavorevb_backlight_devices[0]);
 	platform_device_register(&tavorevb_backlight_devices[1]);
 	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index 685deff86..107f37210 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -16,7 +16,7 @@
 #include <linux/delay.h>
 #include <linux/rfkill.h>
 
-#include <mach/tosa_bt.h>
+#include "tosa_bt.h"
 
 static void tosa_bt_on(struct tosa_bt_data *data)
 {
@@ -131,17 +131,4 @@ static struct platform_driver tosa_bt_driver = {
 		.name = "tosa-bt",
 	},
 };
-
-
-static int __init tosa_bt_init(void)
-{
-	return platform_driver_register(&tosa_bt_driver);
-}
-
-static void __exit tosa_bt_exit(void)
-{
-	platform_driver_unregister(&tosa_bt_driver);
-}
-
-module_init(tosa_bt_init);
-module_exit(tosa_bt_exit);
+module_platform_driver(tosa_bt_driver);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index e6e27c046..13de66029 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -43,12 +43,12 @@
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/reset.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/tosa_bt.h>
+#include "udc.h"
+#include "tosa_bt.h"
 #include <mach/audio.h>
 #include <mach/smemc.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/tosa_bt.h b/arch/arm/mach-pxa/tosa_bt.h
index efc3c3d3b..efc3c3d3b 100644
--- a/arch/arm/mach-pxa/include/mach/tosa_bt.h
+++ b/arch/arm/mach-pxa/tosa_bt.h
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 066e3a250..ea78bc5c4 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -41,7 +41,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/trizeps4.h>
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/udc.h
index 9a827e32d..9a827e32d 100644
--- a/arch/arm/mach-pxa/include/mach/udc.h
+++ b/arch/arm/mach-pxa/udc.h
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index de3b08073..8e89d91b2 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -39,6 +39,7 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/usb/isp116x.h>
 #include <linux/mtd/mtd.h>
@@ -46,12 +47,12 @@
 #include <linux/mtd/physmap.h>
 #include <linux/syscore_ops.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/regs-uart.h>
 #include <linux/platform_data/pcmcia-pxa2xx_viper.h>
-#include <mach/viper.h>
+#include "viper.h"
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -276,8 +277,9 @@ static inline unsigned long viper_irq_pending(void)
 			viper_irq_enabled_mask;
 }
 
-static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void viper_irq_handler(struct irq_desc *desc)
 {
+	unsigned int irq;
 	unsigned long pending;
 
 	pending = viper_irq_pending();
@@ -313,7 +315,7 @@ static void __init viper_init_irq(void)
 		isa_irq = viper_bit_to_irq(level);
 		irq_set_chip_and_handler(isa_irq, &viper_irq_chip,
 					 handle_edge_irq);
-		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
@@ -349,6 +351,11 @@ static struct pxafb_mach_info fb_info = {
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
+static struct pwm_lookup viper_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int viper_backlight_init(struct device *dev)
 {
 	int ret;
@@ -397,10 +404,8 @@ static void viper_backlight_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data viper_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 1000000,
 	.enable_gpio	= -1,
 	.init		= viper_backlight_init,
 	.notify		= viper_backlight_notify,
@@ -938,6 +943,7 @@ static void __init viper_init(void)
 		smc91x_device.num_resources--;
 
 	pxa_set_i2c_info(NULL);
+	pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
 	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
 
 	viper_init_vcore_gpios();
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/viper.h
index 5f5fbf1f6..5f5fbf1f6 100644
--- a/arch/arm/mach-pxa/include/mach/viper.h
+++ b/arch/arm/mach-pxa/viper.h
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 54122a983..c006ee902 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -31,14 +31,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <mach/vpac270.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
 #include <linux/platform_data/ata-pxa.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 13b1d4586..056369ef2 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -28,7 +28,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
@@ -120,7 +120,8 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata xcep_smc91x_info = {
-	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
 };
 
 static struct platform_device smc91x_device = {
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index e1a121b36..510e53387 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/z2_battery.h>
 #include <linux/dma-mapping.h>
@@ -34,13 +35,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
-#include <mach/mfp-pxa27x.h>
+#include "pxa27x.h"
+#include "mfp-pxa27x.h"
 #include <mach/z2.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/pm.h>
+#include "pm.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -199,21 +200,24 @@ static inline void z2_nor_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup z2_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
+		   PWM_POLARITY_NORMAL),
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data z2_backlight_data[] = {
 	[0] = {
 		/* Keypad Backlight */
-		.pwm_id		= 1,
 		.max_brightness	= 1023,
 		.dft_brightness	= 0,
-		.pwm_period_ns	= 1260320,
 		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* LCD Backlight */
-		.pwm_id		= 2,
 		.max_brightness	= 1023,
 		.dft_brightness	= 512,
-		.pwm_period_ns	= 1260320,
 		.enable_gpio	= -1,
 	},
 };
@@ -236,6 +240,7 @@ static struct platform_device z2_backlight_devices[2] = {
 };
 static void __init z2_pwm_init(void)
 {
+	pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
 	platform_device_register(&z2_backlight_devices[0]);
 	platform_device_register(&z2_backlight_devices[1]);
 }
@@ -595,13 +600,11 @@ static struct spi_board_info spi_board_info[] __initdata = {
 };
 
 static struct pxa2xx_spi_master pxa_ssp1_master_info = {
-	.clock_enable	= CKEN_SSP,
 	.num_chipselect	= 1,
 	.enable_dma	= 1,
 };
 
 static struct pxa2xx_spi_master pxa_ssp2_master_info = {
-	.clock_enable	= CKEN_SSP2,
 	.num_chipselect	= 1,
 };
 
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 6158566fa..3b94ecfb9 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -38,17 +38,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/regs-uart.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/audio.h>
 #include <linux/platform_data/pcmcia-pxa2xx_viper.h>
-#include <mach/zeus.h>
+#include "zeus.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
@@ -105,8 +105,9 @@ static inline unsigned long zeus_irq_pending(void)
 	return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
 }
 
-static void zeus_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void zeus_irq_handler(struct irq_desc *desc)
 {
+	unsigned int irq;
 	unsigned long pending;
 
 	pending = zeus_irq_pending();
@@ -151,7 +152,7 @@ static void __init zeus_init_irq(void)
 		isa_irq = zeus_bit_to_irq(level);
 		irq_set_chip_and_handler(isa_irq, &zeus_irq_chip,
 					 handle_edge_irq);
-		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
@@ -909,7 +910,7 @@ static void __init zeus_map_io(void)
 	PMCR = PSPR = 0;
 
 	/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
-	OSCC |= OSCC_OON;
+	writel(readl(OSCC) | OSCC_OON, OSCC);
 
 	/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
 	 * float chip selects and PCMCIA */
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/zeus.h
index 56024f81d..56024f81d 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/zeus.h
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 77daea478..3642389b3 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,15 +19,16 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pxa3xx.h>
+#include "pxa3xx.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/zylonite.h>
+#include "zylonite.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/keypad-pxa27x.h>
@@ -120,11 +121,14 @@ static inline void zylonite_init_leds(void) {}
 #endif
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup zylonite_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
-	.pwm_id		= 3,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
 	.enable_gpio	= -1,
 };
 
@@ -206,6 +210,7 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = {
 
 static void __init zylonite_init_lcd(void)
 {
+	pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
 	platform_device_register(&zylonite_backlight_device);
 
 	if (lcd_id & 0x20) {
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/zylonite.h
index ecca976f0..ecca976f0 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/zylonite.h
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 869bce7c3..e247acf14 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,8 +21,8 @@
 #include <linux/platform_data/pca953x.h>
 #include <linux/gpio.h>
 
-#include <mach/pxa300.h>
-#include <mach/zylonite.h>
+#include "pxa300.h"
+#include "zylonite.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 9942bac4c..47961ae0c 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -18,8 +18,8 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 
-#include <mach/pxa320.h>
-#include <mach/zylonite.h>
+#include "pxa320.h"
+#include "zylonite.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index 2256cd1e2..46ed10a80 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_QCOM
-	bool "Qualcomm Support" if ARCH_MULTI_V7
+	bool "Qualcomm Support"
+	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_GIC
 	select ARM_AMBA
@@ -22,4 +23,8 @@ config ARCH_MSM8974
 	bool "Enable support for MSM8974"
 	select HAVE_ARM_ARCH_TIMER
 
+config ARCH_MDM9615
+	bool "Enable support for MDM9615"
+	select CLKSRC_QCOM
+
 endif
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
index 6d8bbf7d3..d8060dfd1 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -22,6 +22,7 @@ static const char * const qcom_dt_match[] __initconst = {
 	"qcom,ipq8064",
 	"qcom,msm8660-surf",
 	"qcom,msm8960-cdp",
+	"qcom,mdm9615",
 	NULL
 };
 
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index 5cde63a64..5494c9e0c 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -49,7 +49,7 @@ extern void secondary_startup_arm(void);
 static DEFINE_SPINLOCK(boot_lock);
 
 #ifdef CONFIG_HOTPLUG_CPU
-static void __ref qcom_cpu_die(unsigned int cpu)
+static void qcom_cpu_die(unsigned int cpu)
 {
 	wfi();
 }
@@ -332,7 +332,7 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-static struct smp_operations smp_msm8660_ops __initdata = {
+static const struct smp_operations smp_msm8660_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_secondary_init	= qcom_secondary_init,
 	.smp_boot_secondary	= msm8660_boot_secondary,
@@ -342,7 +342,7 @@ static struct smp_operations smp_msm8660_ops __initdata = {
 };
 CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
 
-static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
+static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_secondary_init	= qcom_secondary_init,
 	.smp_boot_secondary	= kpssv1_boot_secondary,
@@ -352,7 +352,7 @@ static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
 };
 CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
 
-static struct smp_operations qcom_smp_kpssv2_ops __initdata = {
+static const struct smp_operations qcom_smp_kpssv2_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_secondary_init	= qcom_secondary_init,
 	.smp_boot_secondary	= kpssv2_boot_secondary,
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 565925f37..70ab4a25a 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -1,13 +1,30 @@
-menu "RealView platform type"
-	depends on ARCH_REALVIEW
+menuconfig ARCH_REALVIEW
+	bool "ARM Ltd. RealView family"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select COMMON_CLK_VERSATILE
+	select GPIO_PL061 if GPIOLIB
+	select ICST
+	select PLAT_VERSATILE
+	select PLAT_VERSATILE_SCHED_CLOCK
+	help
+	  This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
 
 config REALVIEW_DT
 	bool "Support RealView(R) Device Tree based boot"
 	select ARM_GIC
+	select CLK_SP810
+	select HAVE_SMP
+	select ICST
+	select MACH_REALVIEW_EB if ARCH_MULTI_V5
 	select MFD_SYSCON
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
 	select POWER_SUPPLY
+	select SMP_ON_UP if SMP
 	select SOC_REALVIEW
 	select USE_OF
 	help
@@ -17,14 +34,32 @@ config REALVIEW_DT
 config MACH_REALVIEW_EB
 	bool "Support RealView(R) Emulation Baseboard"
 	select ARM_GIC
+	select CPU_ARM926T if ARCH_MULTI_V5
 	help
 	  Include support for the ARM(R) RealView(R) Emulation Baseboard
-	  platform.
+	  platform. On an ARMv5 kernel, this will include support for
+	  the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least
+	  one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore
+	  core tile options should be enabled.
+
+config REALVIEW_EB_ARM1136
+	bool "Support ARM1136J(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	select CPU_V6
+	help
+	  Enable support for the ARM1136 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
+
+config REALVIEW_EB_ARM1176
+	bool "Support ARM1176JZ(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	help
+	  Enable support for the ARM1176 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
 
 config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
-	depends on MACH_REALVIEW_EB
-	select CPU_V7
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
@@ -35,9 +70,7 @@ config REALVIEW_EB_A9MP
 
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
-	depends on MACH_REALVIEW_EB
-	select ARCH_HAS_BARRIERS if SMP
-	select CPU_V6K
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
@@ -48,7 +81,7 @@ config REALVIEW_EB_ARM11MP
 
 config REALVIEW_EB_ARM11MP_REVB
 	bool "Support ARM11MPCore RevB Tile"
-	depends on REALVIEW_EB_ARM11MP
+	depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
 	help
 	  Enable support for the ARM11MPCore Revision B tile on the
 	  Realview(R) Emulation Baseboard platform. Since there are device
@@ -57,9 +90,8 @@ config REALVIEW_EB_ARM11MP_REVB
 
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	select ARCH_HAS_BARRIERS if SMP
+	depends on ARCH_MULTI_V6
 	select ARM_GIC
-	select CPU_V6K
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
@@ -73,6 +105,7 @@ config MACH_REALVIEW_PB11MP
 # ARMv6 CPU without K extensions, but does have the new exclusive ops
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
+	depends on ARCH_MULTI_V6
 	select ARM_GIC
 	select CPU_V6
 	select HAVE_TCM
@@ -92,8 +125,8 @@ config REALVIEW_PB1176_SECURE_FLASH
 
 config MACH_REALVIEW_PBA8
 	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
-	select CPU_V7
 	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Platform Baseboard for
@@ -101,15 +134,15 @@ config MACH_REALVIEW_PBA8
 	  support for PCI-E and Compact Flash.
 
 config MACH_REALVIEW_PBX
-	bool "Support RealView(R) Platform Baseboard Explore"
-	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
+	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select ZONE_DMA if SPARSEMEM
+	select ZONE_DMA
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard
 	  Explore.
@@ -124,6 +157,6 @@ config REALVIEW_HIGH_PHYS_OFFSET
 	  the board supports 512MB of RAM, this option allows the
 	  memory to be accessed contiguously at the high physical
 	  offset. On the PBX board, disabling this option allows 1GB of
-	  RAM to be used with SPARSEMEM.
+	  RAM to be used with HIGHMEM.
 
-endmenu
+endif
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index e07fdf7ae..404882130 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -1,13 +1,18 @@
 #
 # Makefile for the linux kernel.
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include
 
 obj-y					:= core.o
 obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o
+obj-$(CONFIG_SMP)			+= platsmp-dt.o
+
+ifdef CONFIG_ATAGS
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
 obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
 obj-$(CONFIG_SMP)			+= platsmp.o
+endif
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot
deleted file mode 100644
index d2c3d788f..000000000
--- a/arch/arm/mach-realview/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y)
-   zreladdr-y	+= 0x70008000
-params_phys-y	:= 0x70000100
-initrd_phys-y	:= 0x70800000
-else
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-endif
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/board-eb.h
index a301e61a5..a850ae694 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/board-eb.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-eb.h
- *
  * Copyright (C) 2007 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_EB_H
 #define __ASM_ARCH_BOARD_EB_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * RealView EB + ARM11MPCore peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h
index 2a15fef94..29c04a9e1 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/board-pb1176.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-pb1176.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_PB1176_H
 #define __ASM_ARCH_BOARD_PB1176_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h
index aa2d4e02e..b16e6e85e 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/board-pb11mp.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-pb11mp.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_PB11MP_H
 #define __ASM_ARCH_BOARD_PB11MP_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/board-pba8.h
index 4dfc67a4f..6a1391f50 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/board-pba8.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-arm/arch-realview/board-pba8.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_PBA8_H
 #define __ASM_ARCH_BOARD_PBA8_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/board-pbx.h
index 848bfff6d..5cda480b1 100644
--- a/arch/arm/mach-realview/include/mach/board-pbx.h
+++ b/arch/arm/mach-realview/board-pbx.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-pbx.h
- *
  * Copyright (C) 2009 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -20,7 +18,7 @@
 #ifndef __ASM_ARCH_BOARD_PBX_H
 #define __ASM_ARCH_BOARD_PBX_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 44575edc4..a0ead0ae2 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -36,8 +36,7 @@
 #include <linux/memblock.h>
 
 #include <clocksource/timer-sp804.h>
-
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst.h>
@@ -46,8 +45,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <mach/platform.h>
-#include <mach/irqs.h>
+#include "platform.h"
 
 #include <plat/sched_clock.h>
 
@@ -95,7 +93,8 @@ static struct smsc911x_platform_config smsc911x_config = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_NOWAIT,
 };
 
 static struct platform_device realview_eth_device = {
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 868ece221..05a995ea1 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-realview/core.h
- *
  *  Copyright (C) 2004 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *
@@ -54,7 +52,7 @@ extern int realview_usb_register(struct resource *res);
 extern void realview_init_early(void);
 extern void realview_fixup(struct tag *tags, char **from);
 
-extern struct smp_operations realview_smp_ops;
+extern const struct smp_operations realview_smp_ops;
 extern void realview_cpu_die(unsigned int cpu);
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/hardware.h
index 281e71c97..957a230aa 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/hardware.h
@@ -1,6 +1,4 @@
 /*
- *  arch/arm/mach-realview/include/mach/hardware.h
- *
  *  This file contains the hardware definitions of the RealView boards.
  *
  *  Copyright (C) 2003 ARM Limited.
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index ac22dd41b..968e2d196 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -90,7 +90,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
  *
  * Called with IRQs disabled
  */
-void __ref realview_cpu_die(unsigned int cpu)
+void realview_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
deleted file mode 100644
index 9a732195a..000000000
--- a/arch/arm/mach-realview/include/mach/barriers.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * Barriers redefined for RealView ARM11MPCore platforms with L220 cache
- * controller to work around hardware errata causing the outer_sync()
- * operation to deadlock the system.
- */
-#define mb()		dsb()
-#define rmb()		dsb()
-#define wmb()		mb()
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
deleted file mode 100644
index 78854f2fa..000000000
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <mach/irqs-eb.h>
-#include <mach/irqs-pb11mp.h>
-#include <mach/irqs-pb1176.h>
-#include <mach/irqs-pba8.h>
-#include <mach/irqs-pbx.h>
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-
-#define IRQ_GIC_START		32
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
deleted file mode 100644
index 23e7a313f..000000000
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#ifdef CONFIG_SPARSEMEM
-
-/*
- * Sparsemem definitions for RealView PBX.
- *
- * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
- * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
- * may be used for DMA.
- *
- * The macros below define a section size of 256MB and a non-linear virtual to
- * physical mapping:
- *
- * 256MB @ 0x00000000 -> PAGE_OFFSET
- * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
- * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
- */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
-#endif
-
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	28
-
-/* bank page offsets */
-#define PAGE_OFFSET1	(PAGE_OFFSET + 0x10000000)
-#define PAGE_OFFSET2	(PAGE_OFFSET + 0x30000000)
-
-#define PHYS_OFFSET PLAT_PHYS_OFFSET
-
-#define __phys_to_virt(phys)						\
-	((phys) >= 0x80000000 ?	(phys) - 0x80000000 + PAGE_OFFSET2 :	\
-	 (phys) >= 0x20000000 ?	(phys) - 0x20000000 + PAGE_OFFSET1 :	\
-	 (phys) + PAGE_OFFSET)
-
-#define __virt_to_phys(virt)						\
-	 ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 :	\
-	  (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 :	\
-	  (virt) - PAGE_OFFSET)
-
-#endif	/* CONFIG_SPARSEMEM */
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
deleted file mode 100644
index cfa30d217..000000000
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
-#include <mach/board-pbx.h>
-
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
-	if (machine_is_realview_eb())
-		return REALVIEW_EB_UART0_BASE;
-	else if (machine_is_realview_pb11mp())
-		return REALVIEW_PB11MP_UART0_BASE;
-	else if (machine_is_realview_pb1176())
-		return REALVIEW_PB1176_UART0_BASE;
-	else if (machine_is_realview_pba8())
-		return REALVIEW_PBA8_UART0_BASE;
-	else if (machine_is_realview_pbx())
-		return REALVIEW_PBX_UART0_BASE;
-	else
-		return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h
index 44754230f..61e31680a 100644
--- a/arch/arm/mach-realview/include/mach/irqs-eb.h
+++ b/arch/arm/mach-realview/irqs-eb.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-eb.h
- *
  * Copyright (C) 2007 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,6 +19,7 @@
 #ifndef __MACH_IRQS_EB_H
 #define __MACH_IRQS_EB_H
 
+#define IRQ_LOCALTIMER		29
 #define IRQ_EB_GIC_START	32
 
 /*
@@ -112,21 +111,4 @@
 
 #define NR_GIC_EB11MP		2
 
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 128)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
 #endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h
index 708f84156..778edfd43 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/irqs-pb1176.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pb1176.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -76,25 +74,4 @@
 
 #define IRQ_PB1176_SCTL		-1
 
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
 #endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h
index 34e255add..938898a3d 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+++ b/arch/arm/mach-realview/irqs-pb11mp.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,6 +19,7 @@
 #ifndef __MACH_IRQS_PB11MP_H
 #define __MACH_IRQS_PB11MP_H
 
+#define IRQ_LOCALTIMER				29
 #define IRQ_TC11MP_GIC_START			32
 #define IRQ_PB11MP_GIC_START			64
 
@@ -95,28 +94,4 @@
 #define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
 #define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
 
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
 #endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h
index 4a88a4edb..262e32193 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pba8.h
+++ b/arch/arm/mach-realview/irqs-pba8.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pba8.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -70,25 +68,4 @@
 #define IRQ_PBA8_SMC		-1
 #define IRQ_PBA8_SCTL		-1
 
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h
index 206a3001f..4ef0567de 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pbx.h
+++ b/arch/arm/mach-realview/irqs-pbx.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pbx.h
- *
  * Copyright (C) 2009 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -20,6 +18,7 @@
 #ifndef __MACH_IRQS_PBX_H
 #define __MACH_IRQS_PBX_H
 
+#define IRQ_LOCALTIMER				29
 #define IRQ_PBX_GIC_START			32
 
 /*
@@ -85,25 +84,4 @@
 #define IRQ_PBX_SMC		-1
 #define IRQ_PBX_SCTL		-1
 
-#define NR_GIC_PBX		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBX
- */
-#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PBX)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBX
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBX
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBX */
-
 #endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/platform.h
index 1b77a27ba..11121739d 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/platform.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/platform.h
- *
  * Copyright (c) ARM Limited 2003.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c
new file mode 100644
index 000000000..6964e8876
--- /dev/null
+++ b/arch/arm/mach-realview/platsmp-dt.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2015 Linus Walleij
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#include <plat/platsmp.h>
+
+#include "core.h"
+
+#define REALVIEW_SYS_FLAGSSET_OFFSET	0x30
+
+static const struct of_device_id realview_scu_match[] = {
+	{ .compatible = "arm,arm11mp-scu", },
+	{ .compatible = "arm,cortex-a9-scu", },
+	{ .compatible = "arm,cortex-a5-scu", },
+	{ }
+};
+
+static const struct of_device_id realview_syscon_match[] = {
+        { .compatible = "arm,core-module-integrator", },
+        { .compatible = "arm,realview-eb-syscon", },
+        { .compatible = "arm,realview-pb11mp-syscon", },
+        { .compatible = "arm,realview-pbx-syscon", },
+        { },
+};
+
+static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *np;
+	void __iomem *scu_base;
+	struct regmap *map;
+	unsigned int ncores;
+	int i;
+
+	np = of_find_matching_node(NULL, realview_scu_match);
+	if (!np) {
+		pr_err("PLATSMP: No SCU base address\n");
+		return;
+	}
+	scu_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!scu_base) {
+		pr_err("PLATSMP: No SCU remap\n");
+		return;
+	}
+
+	scu_enable(scu_base);
+	ncores = scu_get_core_count(scu_base);
+	pr_info("SCU: %d cores detected\n", ncores);
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+	iounmap(scu_base);
+
+	/* The syscon contains the magic SMP start address registers */
+	np = of_find_matching_node(NULL, realview_syscon_match);
+	if (!np) {
+		pr_err("PLATSMP: No syscon match\n");
+		return;
+	}
+	map = syscon_node_to_regmap(np);
+	if (IS_ERR(map)) {
+		pr_err("PLATSMP: No syscon regmap\n");
+		return;
+	}
+	/* Put the boot address in this magic register */
+	regmap_write(map, REALVIEW_SYS_FLAGSSET_OFFSET,
+		     virt_to_phys(versatile_secondary_startup));
+}
+
+static const struct smp_operations realview_dt_smp_ops __initconst = {
+	.smp_prepare_cpus	= realview_smp_prepare_cpus,
+	.smp_secondary_init	= versatile_secondary_init,
+	.smp_boot_secondary	= versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= realview_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(realview_smp, "arm,realview-smp", &realview_dt_smp_ops);
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 98e3052b7..e8ab69c7a 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -13,13 +13,13 @@
 #include <linux/smp.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/mach-types.h>
 #include <asm/smp_scu.h>
 
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pbx.h>
+#include "board-eb.h"
+#include "board-pb11mp.h"
+#include "board-pbx.h"
 
 #include <plat/platsmp.h>
 
@@ -75,7 +75,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
 		     __io_address(REALVIEW_SYS_FLAGSSET));
 }
 
-struct smp_operations realview_smp_ops __initdata = {
+const struct smp_operations realview_smp_ops __initconst = {
 	.smp_init_cpus		= realview_smp_init_cpus,
 	.smp_prepare_cpus	= realview_smp_prepare_cpus,
 	.smp_secondary_init	= versatile_secondary_init,
diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-realview/realview-dt.c
index cc28b89dd..88b672479 100644
--- a/arch/arm/mach-realview/realview-dt.c
+++ b/arch/arm/mach-realview/realview-dt.c
@@ -11,9 +11,8 @@
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
-#include "core.h"
 
-static const char *realview_dt_platform_compat[] __initconst = {
+static const char *const realview_dt_platform_compat[] __initconst = {
 	"arm,realview-eb",
 	"arm,realview-pb1176",
 	"arm,realview-pb11mp",
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index b3869cbbc..b442fa61e 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,20 +31,21 @@
 #include <linux/platform_data/clk-realview.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/smp_twd.h>
 #include <asm/system_info.h>
+#include <asm/outercache.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-eb.h>
-#include <mach/irqs.h>
+#include "board-eb.h"
+#include "irqs-eb.h"
 
 #include "core.h"
 
@@ -450,6 +451,12 @@ static void __init realview_eb_init(void)
 		 * Bits:  .... ...0 0111 1001 0000 .... .... ....
 		 */
 		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
+
+		/*
+		 * due to a bug in the l220 cache controller, we must not call
+		 * the sync function. stub it out here instead!
+		 */
+		outer_cache.sync = NULL;
 #endif
 		pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu";
 		platform_device_register(&pmu_device);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ce92c1823..537f3878d 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -34,7 +34,7 @@
 #include <linux/reboot.h>
 #include <linux/memblock.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
@@ -45,8 +45,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-pb1176.h>
-#include <mach/irqs.h>
+#include "board-pb1176.h"
+#include "irqs-pb1176.h"
 
 #include "core.h"
 
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 15c45e250..a90a0752f 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -31,7 +31,7 @@
 #include <linux/platform_data/clk-realview.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
@@ -42,9 +42,10 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
+#include <asm/outercache.h>
 
-#include <mach/board-pb11mp.h>
-#include <mach/irqs.h>
+#include "board-pb11mp.h"
+#include "irqs-pb11mp.h"
 
 #include "core.h"
 
@@ -345,6 +346,11 @@ static void __init realview_pb11mp_init(void)
 	 * Bits:  .... ...0 0111 1001 0000 .... .... ....
 	 */
 	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
+	/*
+	 * due to a bug in the l220 cache controller, we must not call
+	 * the sync function. stub it out here instead!
+	 */
+	outer_cache.sync = NULL;
 #endif
 
 	realview_flash_register(realview_pb11mp_flash_resource,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 4c64662f5..ddafb67c2 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/hardware.h>
-#include <mach/board-pba8.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "board-pba8.h"
+#include "irqs-pba8.h"
 
 #include "core.h"
 
@@ -77,14 +77,6 @@ static struct map_desc realview_pba8_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
-#ifdef CONFIG_PCI
-	{
-		.virtual	= PCIX_UNIT_BASE,
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_PCI_BASE),
-		.length		= REALVIEW_PBA8_PCI_BASE_SIZE,
-		.type		= MT_DEVICE
-	},
-#endif
 #ifdef CONFIG_DEBUG_LL
 	{
 		.virtual	= IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 9a22b8642..be1cec5fe 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/hardware.h>
-#include <mach/board-pbx.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "board-pbx.h"
+#include "irqs-pbx.h"
 
 #include "core.h"
 
@@ -79,14 +79,6 @@ static struct map_desc realview_pbx_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
-#ifdef CONFIG_PCI
-	{
-		.virtual	= PCIX_UNIT_BASE,
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
-		.length		= REALVIEW_PBX_PCI_BASE_SIZE,
-		.type		= MT_DEVICE,
-	},
-#endif
 #ifdef CONFIG_DEBUG_LL
 	{
 		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
@@ -256,6 +248,7 @@ static struct resource realview_pbx_isp1761_resources[] = {
 	},
 };
 
+#ifdef CONFIG_CACHE_L2X0
 static struct resource pmu_resources[] = {
 	[0] = {
 		.start		= IRQ_PBX_PMU_CPU0,
@@ -285,6 +278,7 @@ static struct platform_device pmu_device = {
 	.num_resources		= ARRAY_SIZE(pmu_resources),
 	.resource		= pmu_resources,
 };
+#endif
 
 static void __init gic_init_irq(void)
 {
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ae4eb7cc4..9ad84cd01 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -1,12 +1,13 @@
 config ARCH_ROCKCHIP
-	bool "Rockchip RK2928 and RK3xxx SOCs" if ARCH_MULTI_V7
+	bool "Rockchip RK2928 and RK3xxx SOCs"
+	depends on ARCH_MULTI_V7
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
+	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 01b3e3683..4d827a069 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -42,6 +42,7 @@ static int ncores;
 #define PMU_PWRDN_SCU		4
 
 static struct regmap *pmu;
+static int has_pmu = true;
 
 static int pmu_power_domain_is_on(int pd)
 {
@@ -64,7 +65,7 @@ static struct reset_control *rockchip_get_core_reset(int cpu)
 	if (dev)
 		np = dev->of_node;
 	else
-		np = of_get_cpu_node(cpu, 0);
+		np = of_get_cpu_node(cpu, NULL);
 
 	return of_reset_control_get(np, NULL);
 }
@@ -89,20 +90,23 @@ static int pmu_set_power_domain(int pd, bool on)
 	if (!IS_ERR(rstc) && !on)
 		reset_control_assert(rstc);
 
-	ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
-	if (ret < 0) {
-		pr_err("%s: could not update power domain\n", __func__);
-		return ret;
-	}
-
-	ret = -1;
-	while (ret != on) {
-		ret = pmu_power_domain_is_on(pd);
+	if (has_pmu) {
+		ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
 		if (ret < 0) {
-			pr_err("%s: could not read power domain state\n",
-				 __func__);
+			pr_err("%s: could not update power domain\n",
+			       __func__);
 			return ret;
 		}
+
+		ret = -1;
+		while (ret != on) {
+			ret = pmu_power_domain_is_on(pd);
+			if (ret < 0) {
+				pr_err("%s: could not read power domain state\n",
+				       __func__);
+				return ret;
+			}
+		}
 	}
 
 	if (!IS_ERR(rstc)) {
@@ -122,14 +126,14 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
 
-	if (!sram_base_addr || !pmu) {
+	if (!sram_base_addr || (has_pmu && !pmu)) {
 		pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
 		return -ENXIO;
 	}
 
 	if (cpu >= ncores) {
 		pr_err("%s: cpu %d outside maximum number of cpus %d\n",
-							__func__, cpu, ncores);
+		       __func__, cpu, ncores);
 		return -ENXIO;
 	}
 
@@ -139,7 +143,8 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return ret;
 
 	if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
-		/* We communicate with the bootrom to active the cpus other
+		/*
+		 * We communicate with the bootrom to active the cpus other
 		 * than cpu0, after a blob of initialize code, they will
 		 * stay at wfe state, once they are actived, they will check
 		 * the mailbox:
@@ -148,7 +153,7 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		 * The cpu0 need to wait the other cpus other than cpu0 entering
 		 * the wfe state.The wait time is affected by many aspects.
 		 * (e.g: cpu frequency, bootrom frequency, sram frequency, ...)
-		 * */
+		 */
 		mdelay(1); /* ensure the cpus other than cpu0 to startup */
 
 		writel(virt_to_phys(secondary_startup), sram_base_addr + 8);
@@ -274,7 +279,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		return;
 	}
 
-	if (rockchip_smp_prepare_pmu())
+	if (has_pmu && rockchip_smp_prepare_pmu())
 		return;
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
@@ -317,9 +322,23 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		pmu_set_power_domain(0 + i, false);
 }
 
+static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus)
+{
+	has_pmu = false;
+
+	rockchip_smp_prepare_cpus(max_cpus);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 static int rockchip_cpu_kill(unsigned int cpu)
 {
+	/*
+	 * We need a delay here to ensure that the dying CPU can finish
+	 * executing v7_coherency_exit() and reach the WFI/WFE state
+	 * prior to having the power domain disabled.
+	 */
+	mdelay(1);
+
 	pmu_set_power_domain(0 + cpu, false);
 	return 1;
 }
@@ -327,12 +346,21 @@ static int rockchip_cpu_kill(unsigned int cpu)
 static void rockchip_cpu_die(unsigned int cpu)
 {
 	v7_exit_coherency_flush(louis);
-	while(1)
+	while (1)
 		cpu_do_idle();
 }
 #endif
 
-static struct smp_operations rockchip_smp_ops __initdata = {
+static const struct smp_operations rk3036_smp_ops __initconst = {
+	.smp_prepare_cpus	= rk3036_smp_prepare_cpus,
+	.smp_boot_secondary	= rockchip_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= rockchip_cpu_kill,
+	.cpu_die		= rockchip_cpu_die,
+#endif
+};
+
+static const struct smp_operations rockchip_smp_ops __initconst = {
 	.smp_prepare_cpus	= rockchip_smp_prepare_cpus,
 	.smp_boot_secondary	= rockchip_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -340,4 +368,6 @@ static struct smp_operations rockchip_smp_ops __initdata = {
 	.cpu_die		= rockchip_cpu_die,
 #endif
 };
+
+CPU_METHOD_OF_DECLARE(rk3036_smp, "rockchip,rk3036-smp", &rk3036_smp_ops);
 CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index b0dcbe28f..bee8c8051 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -45,9 +45,11 @@ static phys_addr_t rk3288_bootram_phy;
 
 static struct regmap *pmu_regmap;
 static struct regmap *sgrf_regmap;
+static struct regmap *grf_regmap;
 
 static u32 rk3288_pmu_pwr_mode_con;
 static u32 rk3288_sgrf_soc_con0;
+static u32 rk3288_sgrf_cpu_con0;
 
 static inline u32 rk3288_l2_config(void)
 {
@@ -66,10 +68,37 @@ static void rk3288_config_bootdata(void)
 	rkpm_bootdata_l2ctlr = rk3288_l2_config();
 }
 
+#define GRF_UOC0_CON0			0x320
+#define GRF_UOC1_CON0			0x334
+#define GRF_UOC2_CON0			0x348
+#define GRF_SIDDQ			BIT(13)
+
+static bool rk3288_slp_disable_osc(void)
+{
+	static const u32 reg_offset[] = { GRF_UOC0_CON0, GRF_UOC1_CON0,
+					  GRF_UOC2_CON0 };
+	u32 reg, i;
+
+	/*
+	 * if any usb phy is still on(GRF_SIDDQ==0), that means we need the
+	 * function of usb wakeup, so do not switch to 32khz, since the usb phy
+	 * clk does not connect to 32khz osc
+	 */
+	for (i = 0; i < ARRAY_SIZE(reg_offset); i++) {
+		regmap_read(grf_regmap, reg_offset[i], &reg);
+		if (!(reg & GRF_SIDDQ))
+			return false;
+	}
+
+	return true;
+}
+
 static void rk3288_slp_mode_set(int level)
 {
 	u32 mode_set, mode_set1;
+	bool osc_disable = rk3288_slp_disable_osc();
 
+	regmap_read(sgrf_regmap, RK3288_SGRF_CPU_CON0, &rk3288_sgrf_cpu_con0);
 	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
 
 	regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
@@ -94,9 +123,6 @@ static void rk3288_slp_mode_set(int level)
 	regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
 		     rk3288_bootram_phy);
 
-	regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
-		     PMU_ARMINT_WAKEUP_EN);
-
 	mode_set = BIT(PMU_GLOBAL_INT_DISABLE) | BIT(PMU_L2FLUSH_EN) |
 		   BIT(PMU_SREF0_ENTER_EN) | BIT(PMU_SREF1_ENTER_EN) |
 		   BIT(PMU_DDR0_GATING_EN) | BIT(PMU_DDR1_GATING_EN) |
@@ -107,13 +133,31 @@ static void rk3288_slp_mode_set(int level)
 
 	if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) {
 		/* arm off, logic deep sleep */
-		mode_set |= BIT(PMU_BUS_PD_EN) |
+		mode_set |= BIT(PMU_BUS_PD_EN) | BIT(PMU_PMU_USE_LF) |
 			    BIT(PMU_DDR1IO_RET_EN) | BIT(PMU_DDR0IO_RET_EN) |
-			    BIT(PMU_OSC_24M_DIS) | BIT(PMU_PMU_USE_LF) |
 			    BIT(PMU_ALIVE_USE_LF) | BIT(PMU_PLL_PD_EN);
 
+		if (osc_disable)
+			mode_set |= BIT(PMU_OSC_24M_DIS);
+
 		mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) |
 			     BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA);
+
+		regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
+			     PMU_ARMINT_WAKEUP_EN);
+
+		/*
+		 * In deep suspend we use PMU_PMU_USE_LF to let the rk3288
+		 * switch its main clock supply to the alternative 32kHz
+		 * source. Therefore set 30ms on a 32kHz clock for pmic
+		 * stabilization. Similar 30ms on 24MHz for the other
+		 * mode below.
+		 */
+		regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 32 * 30);
+
+		/* only wait for stabilization, if we turned the osc off */
+		regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT,
+					 osc_disable ? 32 * 30 : 0);
 	} else {
 		/*
 		 * arm off, logic normal
@@ -121,6 +165,15 @@ static void rk3288_slp_mode_set(int level)
 		 * wakeup will be error
 		 */
 		mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN);
+
+		regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
+			     PMU_ARMINT_WAKEUP_EN | PMU_GPIOINT_WAKEUP_EN);
+
+		/* 30ms on a 24MHz clock for pmic stabilization */
+		regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 24000 * 30);
+
+		/* oscillator is still running, so no need to wait */
+		regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, 0);
 	}
 
 	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set);
@@ -129,6 +182,9 @@ static void rk3288_slp_mode_set(int level)
 
 static void rk3288_slp_mode_set_resume(void)
 {
+	regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0,
+		     rk3288_sgrf_cpu_con0 | SGRF_DAPDEVICEEN_WRITE);
+
 	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON,
 		     rk3288_pmu_pwr_mode_con);
 
@@ -190,7 +246,14 @@ static int rk3288_suspend_init(struct device_node *np)
 				"rockchip,rk3288-sgrf");
 	if (IS_ERR(sgrf_regmap)) {
 		pr_err("%s: could not find sgrf regmap\n", __func__);
-		return PTR_ERR(pmu_regmap);
+		return PTR_ERR(sgrf_regmap);
+	}
+
+	grf_regmap = syscon_regmap_lookup_by_compatible(
+				"rockchip,rk3288-grf");
+	if (IS_ERR(grf_regmap)) {
+		pr_err("%s: could not find grf regmap\n", __func__);
+		return PTR_ERR(grf_regmap);
 	}
 
 	sram_np = of_find_compatible_node(NULL, NULL,
@@ -221,9 +284,6 @@ static int rk3288_suspend_init(struct device_node *np)
 	memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume,
 	       rk3288_bootram_sz);
 
-	regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, OSC_STABL_CNT_THRESH);
-	regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, PMU_STABL_CNT_THRESH);
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
index 3e8d39c0c..b5af26f83 100644
--- a/arch/arm/mach-rockchip/pm.h
+++ b/arch/arm/mach-rockchip/pm.h
@@ -59,19 +59,9 @@ static inline void rockchip_suspend_init(void)
 #define SGRF_DAPDEVICEEN		BIT(0)
 #define SGRF_DAPDEVICEEN_WRITE		BIT(16)
 
-#define RK3288_CRU_MODE_CON		0x50
-#define RK3288_CRU_SEL0_CON		0x60
-#define RK3288_CRU_SEL1_CON		0x64
-#define RK3288_CRU_SEL10_CON		0x88
-#define RK3288_CRU_SEL33_CON		0xe4
-#define RK3288_CRU_SEL37_CON		0xf4
-
 /* PMU_WAKEUP_CFG1 bits */
 #define PMU_ARMINT_WAKEUP_EN		BIT(0)
-
-/* wait 30ms for OSC stable and 30ms for pmic stable */
-#define OSC_STABL_CNT_THRESH	(32 * 30)
-#define PMU_STABL_CNT_THRESH	(32 * 30)
+#define PMU_GPIOINT_WAKEUP_EN		BIT(3)
 
 enum rk3288_pwr_mode_con {
 	PMU_PWR_MODE_EN = 0,
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index b6cf3b449..a7ab9ec14 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -67,14 +67,12 @@ static void __init rockchip_timer_init(void)
 	}
 
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 static void __init rockchip_dt_init(void)
 {
 	rockchip_suspend_init();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	platform_device_register_simple("cpufreq-dt", 0, NULL, 0);
 }
 
 static const char * const rockchip_board_dt_compat[] = {
@@ -82,6 +80,7 @@ static const char * const rockchip_board_dt_compat[] = {
 	"rockchip,rk3066a",
 	"rockchip,rk3066b",
 	"rockchip,rk3188",
+	"rockchip,rk3228",
 	"rockchip,rk3288",
 	NULL,
 };
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index fcb1d59f7..dc67a7fb3 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -551,8 +551,7 @@ static void ecard_check_lockup(struct irq_desc *desc)
 	}
 }
 
-static void
-ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void ecard_irq_handler(struct irq_desc *desc)
 {
 	ecard_t *ec;
 	int called = 0;
@@ -946,7 +945,7 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
 		irq_set_chip_and_handler(ec->irq, &ecard_chip,
 					 handle_level_irq);
 		irq_set_chip_data(ec->irq, ec);
-		set_irq_flags(ec->irq, IRQF_VALID);
+		irq_clear_status_flags(ec->irq, IRQ_NOREQUEST);
 	}
 
 #ifdef CONFIG_ARCH_RPC
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index 0fd4b0b8e..654a6f3f2 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -76,7 +76,7 @@ int white;
 /*
  * This does not append a newline
  */
-static void putc(int c)
+static inline void putc(int c)
 {
 	extern void ll_write_char(char *, char c, char white);
 	int x,y;
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 3e4fa849c..66502e620 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -117,7 +117,7 @@ extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
 
 void __init rpc_init_irq(void)
 {
-	unsigned int irq, flags;
+	unsigned int irq, clr, set = 0;
 
 	iomd_writeb(0, IOMD_IRQMASKA);
 	iomd_writeb(0, IOMD_IRQMASKB);
@@ -128,37 +128,37 @@ void __init rpc_init_irq(void)
 		&rpc_default_fiq_end - &rpc_default_fiq_start);
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
-		flags = IRQF_VALID;
+		clr = IRQ_NOREQUEST;
 
 		if (irq <= 6 || (irq >= 9 && irq <= 15))
-			flags |= IRQF_PROBE;
+			clr |= IRQ_NOPROBE;
 
 		if (irq == 21 || (irq >= 16 && irq <= 19) ||
 		    irq == IRQ_KEYBOARDTX)
-			flags |= IRQF_NOAUTOEN;
+			set |= IRQ_NOAUTOEN;
 
 		switch (irq) {
 		case 0 ... 7:
 			irq_set_chip_and_handler(irq, &iomd_a_chip,
 						 handle_level_irq);
-			set_irq_flags(irq, flags);
+			irq_modify_status(irq, clr, set);
 			break;
 
 		case 8 ... 15:
 			irq_set_chip_and_handler(irq, &iomd_b_chip,
 						 handle_level_irq);
-			set_irq_flags(irq, flags);
+			irq_modify_status(irq, clr, set);
 			break;
 
 		case 16 ... 21:
 			irq_set_chip_and_handler(irq, &iomd_dma_chip,
 						 handle_level_irq);
-			set_irq_flags(irq, flags);
+			irq_modify_status(irq, clr, set);
 			break;
 
 		case 64 ... 71:
 			irq_set_chip(irq, &iomd_fiq_chip);
-			set_irq_flags(irq, IRQF_VALID);
+			irq_modify_status(irq, clr, set);
 			break;
 		}
 	}
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 23bec3a85..4b1690acb 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -11,10 +11,11 @@ if ARCH_S3C24XX
 
 config PLAT_S3C24XX
 	def_bool y
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select NO_IOPORT_MAP
 	select S3C_DEV_NAND
 	select IRQ_DOMAIN
+	select COMMON_CLK
 	help
 	  Base platform code for any Samsung S3C24XX device
 
@@ -124,6 +125,11 @@ config S3C24XX_PLL
 	  This also means that the PLL tables for the selected CPU(s) will
 	  be built which may increase the size of the kernel image.
 
+config S3C_SETUP_CAMIF
+	bool
+	help
+	  Compile in common setup code for S3C CAMIF devices
+
 # cpu frequency items common between s3c2410 and s3c2440/s3c2442
 
 config S3C2410_IOTIMING
@@ -400,7 +406,7 @@ config MACH_S3C2416_DT
 
 endif	# CPU_S3C2416
 
-if CPU_S3C2440
+if CPU_S3C2440 || CPU_S3C2442
 
 config S3C2440_XTAL_12000000
 	bool
@@ -427,6 +433,9 @@ config S3C2440_PLL_16934400
 	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+endif
+
+if CPU_S3C2440
 
 comment "S3C2440 Boards"
 
@@ -455,7 +464,6 @@ config MACH_AT2440EVB
 
 config MACH_MINI2440
 	bool "MINI2440 development board"
-	select EEPROM_AT24 if I2C
 	select LEDS_CLASS
 	select LEDS_TRIGGERS
 	select LEDS_TRIGGER_BACKLIGHT
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 05920c8a5..8ac2f58a3 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -99,3 +99,4 @@ obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
 obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o
+obj-$(CONFIG_S3C_SETUP_CAMIF)		+= setup-camif.o
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c
index cb1b79195..2bb08961e 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c24xx/bast-irq.c
@@ -100,9 +100,7 @@ static struct irq_chip  bast_pc104_chip = {
 	.irq_ack	= bast_pc104_maskack
 };
 
-static void
-bast_irq_pc104_demux(unsigned int irq,
-		     struct irq_desc *desc)
+static void bast_irq_pc104_demux(struct irq_desc *desc)
 {
 	unsigned int stat;
 	unsigned int irqno;
@@ -147,7 +145,7 @@ static __init int bast_irq_init(void)
 
 			irq_set_chip_and_handler(irqno, &bast_pc104_chip,
 						 handle_level_irq);
-			set_irq_flags(irqno, IRQF_VALID);
+			irq_clear_status_flags(irqno, IRQ_NOREQUEST);
 		}
 	}
 
diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/mach-s3c24xx/fb-core.h
index bca383efc..103bdbadd 100644
--- a/arch/arm/plat-samsung/include/plat/fb-core.h
+++ b/arch/arm/mach-s3c24xx/fb-core.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-samsung/include/plat/fb-core.h
- *
  * Copyright 2010 Samsung Electronics Co., Ltd.
  *	Pawel Osciak <p.osciak@samsung.com>
  *
diff --git a/arch/arm/mach-s3c24xx/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h
index 5dd1db4e2..235c53647 100644
--- a/arch/arm/mach-s3c24xx/include/mach/io.h
+++ b/arch/arm/mach-s3c24xx/include/mach/io.h
@@ -190,7 +190,7 @@ DECLARE_IO(int,l,"")
 	result;								\
 })
 
-#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
+#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)0 + (port)))
 
 #define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
 #define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 444793f0f..adc39043a 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -14,13 +14,6 @@
 #define __ASM_ARCH_MAP_H
 
 #include <plat/map-base.h>
-
-/*
- * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
- * So need to define it, and here is to avoid redefinition warning.
- */
-#define S3C_UART_OFFSET		(0x4000)
-
 #include <plat/map-s3c.h>
 
 /*
@@ -34,9 +27,6 @@
 #define S3C2410_PA_MEMCTRL	(0x48000000)
 #define S3C24XX_SZ_MEMCTRL	SZ_1M
 
-/* UARTs */
-#define S3C_VA_UARTx(uart)	(S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
 /* Timers */
 #define S3C2410_PA_TIMER	(0x51000000)
 #define S3C24XX_SZ_TIMER	SZ_1M
@@ -157,7 +147,6 @@
 
 #define S3C_PA_FB	    S3C2443_PA_FB
 #define S3C_PA_IIC          S3C2410_PA_IIC
-#define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2416_PA_HSMMC0
 #define S3C_PA_HSMMC1	    S3C2443_PA_HSMMC
diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
index 69459dbbd..712333fec 100644
--- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
@@ -85,3 +85,17 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 
 static inline void s3c_pm_restored_gpios(void) { }
 static inline void samsung_pm_saved_gpios(void) { }
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+#ifdef CONFIG_PM_SLEEP
+#define s3c_irqwake_intallow	(1L << 30 | 0xfL)
+#define s3c_irqwake_eintallow	(0x0000fff0L)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow  0
+#endif
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index c6583cfa5..0d622f3b5 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -520,7 +520,7 @@
 #define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
 #define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
 
-/* interrupt filtering conrrol for EINT16..EINT23 */
+/* interrupt filtering control for EINT16..EINT23 */
 #define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
 #define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
 #define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
index 4cd13ab64..65e5f9cb6 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
@@ -423,7 +423,7 @@ void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
  * @timings: The IO timing information to fill out.
  *
  * Calculate the @timings timing information from the current frequency
- * information in @cfg, and the new frequency configur
+ * information in @cfg, and the new frequency configuration
  * through all the IO banks, reading the state and then updating @iot
  * as necessary.
  *
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
index b91341ef2..417b7a20c 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
@@ -25,19 +25,10 @@
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
+#include <mach/pm-core.h>
 
 #include <asm/irq.h>
 
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow	= 1L << 30 | 0xfL;
-unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
-
 int s3c_irq_wake(struct irq_data *data, unsigned int state)
 {
 	unsigned long irqbit = 1 << data->hwirq;
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 6d1e0b9c5..27ae68775 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -154,6 +154,7 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
 #define ADC_NOM_CHG_DETECT_1A 6
 #define ADC_NOM_CHG_DETECT_USB 43
 
+#ifdef CONFIG_PCF50633_ADC
 static void
 gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
 {
@@ -174,6 +175,7 @@ gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
 
 	pcf50633_mbc_usb_curlim_set(pcf, ma);
 }
+#endif
 
 static struct delayed_work gta02_charger_work;
 static int gta02_usb_vbus_draw;
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index d40d4f524..7ed786192 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
@@ -469,6 +470,11 @@ static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
 	.ocr_avail     = MMC_VDD_32_33,
 };
 
+static struct pwm_lookup h1940_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int h1940_backlight_init(struct device *dev)
 {
 	gpio_request(S3C2410_GPB(0), "Backlight");
@@ -503,11 +509,8 @@ static void h1940_backlight_exit(struct device *dev)
 
 
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 0,
 	.max_brightness = 100,
 	.dft_brightness = 50,
-	/* tcnt = 0x31 */
-	.pwm_period_ns  = 36296,
 	.enable_gpio    = -1,
 	.init           = h1940_backlight_init,
 	.notify		= h1940_backlight_notify,
@@ -661,7 +664,7 @@ static void __init h1940_map_io(void)
 
 	/* Add latch gpio chip, set latch initial value */
 	h1940_latch_control(0, 0);
-	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
+	WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL));
 }
 
 static void __init h1940_init_time(void)
@@ -725,6 +728,7 @@ static void __init h1940_init(void)
 	gpio_request(H1940_LATCH_SD_POWER, "SD power");
 	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
 
+	pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 
 	gpio_request(S3C2410_GPA(1), "Red LED blink");
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 171c1f11f..070a0d071 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -522,7 +522,7 @@ static void __init n30_hwinit(void)
 	 *
 	 * The pull ups for H6/H7 are enabled on N30 but not on the
 	 * N35/PiN.  I suppose is useful for a budget model of the N30
-	 * with no bluetooh.  It doesn't hurt to have the pull ups
+	 * with no bluetooth.  It doesn't hurt to have the pull ups
 	 * enabled on the N35, so leave them enabled for all models.
 	 */
 	__raw_writel(0x0028aaaa, S3C2410_GPHCON);
diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
index ce2db235d..262ab0744 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
@@ -143,7 +143,7 @@ static int osiris_dvs_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+/* the CONFIG_PM block is so small, it isn't worth actually compiling it
  * out if the configuration isn't set. */
 
 static int osiris_dvs_suspend(struct device *dev)
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 1d35ff375..25a139bb9 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -375,6 +375,11 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 
 };
 
+static struct pwm_lookup rx1950_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct pwm_device *lcd_pwm;
 
 static void rx1950_lcd_power(int enable)
@@ -491,6 +496,12 @@ static int rx1950_backlight_init(struct device *dev)
 		return PTR_ERR(lcd_pwm);
 	}
 
+	/*
+	 * FIXME: pwm_apply_args() should be removed when switching to
+	 * the atomic PWM API.
+	 */
+	pwm_apply_args(lcd_pwm);
+
 	rx1950_lcd_power(1);
 	rx1950_bl_power(1);
 
@@ -520,10 +531,8 @@ static int rx1950_backlight_notify(struct device *dev, int brightness)
 }
 
 static struct platform_pwm_backlight_data rx1950_backlight_data = {
-	.pwm_id = 0,
 	.max_brightness = 24,
 	.dft_brightness = 4,
-	.pwm_period_ns = 48000,
 	.enable_gpio = -1,
 	.init = rx1950_backlight_init,
 	.notify = rx1950_backlight_notify,
@@ -792,6 +801,7 @@ static void __init rx1950_init_machine(void)
 	gpio_direction_output(S3C2410_GPA(4), 0);
 	gpio_direction_output(S3C2410_GPJ(6), 0);
 
+	pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
 	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
 
 	i2c_register_board_info(0, rx1950_i2c_devices,
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
index f886478b8..c83c07657 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -17,7 +17,6 @@
 
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
-#include <linux/of_platform.h>
 #include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
@@ -35,11 +34,10 @@ static void __init s3c2416_dt_map_io(void)
 
 static void __init s3c2416_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	s3c_pm_init();
 }
 
-static char const *s3c2416_dt_compat[] __initdata = {
+static const char *const s3c2416_dt_compat[] __initconst = {
 	"samsung,s3c2416",
 	"samsung,s3c2450",
 	NULL
diff --git a/arch/arm/plat-samsung/include/plat/nand-core.h b/arch/arm/mach-s3c24xx/nand-core.h
index 6de20789a..7e811fe1c 100644
--- a/arch/arm/plat-samsung/include/plat/nand-core.h
+++ b/arch/arm/mach-s3c24xx/nand-core.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-samsung/include/plat/nand-core.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c
index 5e37d3685..7ee4924a5 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c
@@ -32,11 +32,12 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table pll_vals_12MHz[] = {
     { .frequency = 34000000,  .driver_data = PLLVAL(82, 2, 3),   },
     { .frequency = 45000000,  .driver_data = PLLVAL(82, 1, 3),   },
-    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
     { .frequency = 48000000,  .driver_data = PLLVAL(120, 2, 3),  },
+    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
     { .frequency = 56000000,  .driver_data = PLLVAL(142, 2, 3),  },
     { .frequency = 68000000,  .driver_data = PLLVAL(82, 2, 2),   },
     { .frequency = 79000000,  .driver_data = PLLVAL(71, 1, 2),   },
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
index a19460e6e..a3fbfed75 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -20,7 +20,8 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
-static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+/* This array should be sorted in ascending order of the frequencies */
+static struct cpufreq_frequency_table s3c2440_plls_12[] = {
 	{ .frequency = 75000000,	.driver_data = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
 	{ .frequency = 80000000,	.driver_data = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
 	{ .frequency = 90000000,	.driver_data = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
index 1191b2905..bcff89fd9 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -20,7 +20,8 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
-static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+/* This array should be sorted in ascending order of the frequencies */
+static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
 	{ .frequency = 78019200,	.driver_data = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
 	{ .frequency = 84067200,	.driver_data = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
 	{ .frequency = 90115200,	.driver_data = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 64a13605c..fb5ee8d38 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -40,11 +40,11 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
-#include <plat/nand-core.h>
 #include <plat/pm.h>
 #include <plat/regs-spi.h>
 
 #include "common.h"
+#include "nand-core.h"
 #include "regs-dsc.h"
 #include "s3c2412-power.h"
 
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 3f8ca2a3e..621b8648a 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -59,12 +59,12 @@
 #include <plat/pm.h>
 
 #include <plat/iic-core.h>
-#include <plat/fb-core.h>
-#include <plat/nand-core.h>
 #include <plat/adc-core.h>
-#include <plat/spi-core.h>
 
 #include "common.h"
+#include "fb-core.h"
+#include "nand-core.h"
+#include "spi-core.h"
 
 static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index 87b6b89d8..b559d378c 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -41,10 +41,11 @@
 #include <plat/gpio-cfg-helpers.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/fb-core.h>
-#include <plat/nand-core.h>
 #include <plat/adc-core.h>
-#include <plat/spi-core.h>
+
+#include "fb-core.h"
+#include "nand-core.h"
+#include "spi-core.h"
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index b14119585..31fd27326 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -41,9 +41,9 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/nand-core.h>
 
 #include "common.h"
+#include "nand-core.h"
 #include "regs-dsc.h"
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
diff --git a/arch/arm/plat-samsung/setup-camif.c b/arch/arm/mach-s3c24xx/setup-camif.c
index 72d8edb89..72d8edb89 100644
--- a/arch/arm/plat-samsung/setup-camif.c
+++ b/arch/arm/mach-s3c24xx/setup-camif.c
diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/mach-s3c24xx/spi-core.h
index 0b9428ab3..0b9428ab3 100644
--- a/arch/arm/plat-samsung/include/plat/spi-core.h
+++ b/arch/arm/mach-s3c24xx/spi-core.h
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index eff95e950..459214fa2 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -2,6 +2,27 @@
 #	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
 #
 # Licensed under GPLv2
+menuconfig ARCH_S3C64XX
+	bool "Samsung S3C64XX"
+	depends on ARCH_MULTI_V6
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_SAMSUNG_PWM
+	select COMMON_CLK_SAMSUNG
+	select GPIO_SAMSUNG if ATAGS
+	select GPIOLIB
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_TCM
+	select PLAT_SAMSUNG
+	select PM_GENERIC_DOMAINS if PM
+	select S3C_DEV_NAND if ATAGS
+	select S3C_GPIO_TRACK if ATAGS
+	select SAMSUNG_ATAGS if ATAGS
+	select SAMSUNG_WAKEMASK if PM
+	select SAMSUNG_WDT_RESET
+	help
+	  Samsung S3C64XX series based systems
 
 if ARCH_S3C64XX
 
@@ -34,6 +55,12 @@ config S3C64XX_DEV_ONENAND1
 	help
 	  Compile in platform device definition for OneNAND1 controller
 
+config SAMSUNG_DEV_BACKLIGHT
+	bool
+	depends on SAMSUNG_DEV_PWM
+	help
+	  Compile in platform device definition LCD backlight with PWM Timer
+
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
@@ -84,6 +111,7 @@ config S3C64XX_SETUP_USB_PHY
 
 config MACH_SMDK6400
        bool "SMDK6400"
+	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
 	select S3C_DEV_HSMMC1
@@ -94,6 +122,7 @@ config MACH_SMDK6400
 
 config MACH_ANW6410
 	bool "A&W6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -102,6 +131,7 @@ config MACH_ANW6410
 
 config MACH_MINI6410
 	bool "MINI6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -117,6 +147,7 @@ config MACH_MINI6410
 
 config MACH_REAL6410
 	bool "REAL6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -132,6 +163,7 @@ config MACH_REAL6410
 
 config MACH_SMDK6410
 	bool "SMDK6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select S3C64XX_SETUP_FB_24BPP
@@ -219,6 +251,7 @@ config SMDK6410_WM1192_EV1
 
 config MACH_NCP
 	bool "NCP"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_I2C1
 	select S3C_DEV_HSMMC1
@@ -228,6 +261,7 @@ config MACH_NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -259,18 +293,21 @@ config MACH_SMARTQ
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
+	depends on ATAGS
 	select MACH_SMARTQ
 	help
 	    Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
+	depends on ATAGS
 	select MACH_SMARTQ
 	help
 	    Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
+	depends on ATAGS
 	depends on I2C=y
 	select CPU_S3C6410
 	select LEDS_GPIO_REGISTER
@@ -304,7 +341,6 @@ config MACH_S3C64XX_DT
 	select CPU_S3C6410
 	select PINCTRL
 	select PINCTRL_S3C64XX
-	select USE_OF
 	help
 	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
 	  enabled.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 17f4b07ec..256cd5b40 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -5,21 +5,25 @@
 #
 # Licensed under GPLv2
 
-# Core
-
-obj-y				+= common.o
-
-# Core support
-
-obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
-obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
 
 # PM
 
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM_SLEEP)		+= irq-pm.o sleep.o
+obj-$(CONFIG_PM_SLEEP)		+= sleep.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
+ifdef CONFIG_SAMSUNG_ATAGS
+
+obj-$(CONFIG_PM_SLEEP)          += irq-pm.o
+
+# Core
+
+obj-y				+= common.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+
 # DMA support
 
 obj-$(CONFIG_S3C64XX_PL080)	+= pl080.o
@@ -40,6 +44,8 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_S3C64XX_SETUP_SPI)		+= setup-spi.o
 obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o
 
+obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_ANW6410)		+= mach-anw6410.o
@@ -53,4 +59,6 @@ obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
 obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
 obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
+endif
+
 obj-$(CONFIG_MACH_S3C64XX_DT)		+= mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot
deleted file mode 100644
index c642333af..000000000
--- a/arch/arm/mach-s3c64xx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x50008000
-params_phys-y	:= 0x50000100
diff --git a/arch/arm/plat-samsung/include/plat/ata-core.h b/arch/arm/mach-s3c64xx/ata-core.h
index f5a4ec714..5951f24a9 100644
--- a/arch/arm/plat-samsung/include/plat/ata-core.h
+++ b/arch/arm/mach-s3c64xx/ata-core.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/arch/arm/plat-samsung/include/plat/backlight.h b/arch/arm/mach-s3c64xx/backlight.h
index ad530c78f..8dcacac52 100644
--- a/arch/arm/plat-samsung/include/plat/backlight.h
+++ b/arch/arm/mach-s3c64xx/backlight.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-samsung/include/plat/backlight.h
- *
+/*
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *              http://www.samsung.com
  *
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 16547f264..7c66ce1a6 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -21,7 +21,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/clk-provider.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
@@ -40,6 +39,7 @@
 #include <asm/system_misc.h>
 
 #include <mach/map.h>
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
@@ -48,12 +48,12 @@
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/gpio-cfg.h>
-#include <plat/irq-uart.h>
 #include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
-#include <plat/watchdog-reset.h>
 
 #include "common.h"
+#include "irq-uart.h"
+#include "watchdog-reset.h"
 
 /* External clock frequency */
 static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
@@ -209,7 +209,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 static __init int s3c64xx_dev_init(void)
 {
 	/* Not applicable when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
 	subsys_system_register(&s3c64xx_subsys, NULL);
@@ -389,22 +389,22 @@ static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
 	}
 }
 
-static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+static void s3c_irq_demux_eint0_3(struct irq_desc *desc)
 {
 	s3c_irq_demux_eint(0, 3);
 }
 
-static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+static void s3c_irq_demux_eint4_11(struct irq_desc *desc)
 {
 	s3c_irq_demux_eint(4, 11);
 }
 
-static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
+static void s3c_irq_demux_eint12_19(struct irq_desc *desc)
 {
 	s3c_irq_demux_eint(12, 19);
 }
 
-static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
+static void s3c_irq_demux_eint20_27(struct irq_desc *desc)
 {
 	s3c_irq_demux_eint(20, 27);
 }
@@ -414,13 +414,13 @@ static int __init s3c64xx_init_irq_eint(void)
 	int irq;
 
 	/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return -ENODEV;
 
 	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
 		irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
 		irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
-		set_irq_flags(irq, IRQF_VALID);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST);
 	}
 
 	irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index 9eb864412..4f204668f 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -24,6 +24,7 @@ void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 
 void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
 
+struct device_node;
 void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
 	unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
 void s3c64xx_set_xtal_freq(unsigned long freq);
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index 93aa8cb70..5322db511 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -18,6 +18,7 @@
 
 #include <asm/cpuidle.h>
 
+#include <plat/cpu.h>
 #include <mach/map.h>
 
 #include "regs-sys.h"
@@ -57,6 +58,8 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
 
 static int __init s3c64xx_init_cpuidle(void)
 {
-	return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+	if (soc_is_s3c64xx())
+		return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+	return 0;
 }
 device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index ff780a8d8..b57783371 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -54,12 +54,13 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 
 static struct resource s3c64xx_iis0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_I2S0_OUT),
-	[2] = DEFINE_RES_DMA(DMACH_I2S0_IN),
 };
 
-static struct s3c_audio_pdata i2sv3_pdata = {
+static struct s3c_audio_pdata i2s0_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_playback = DMACH_I2S0_OUT,
+	.dma_capture = DMACH_I2S0_IN,
 };
 
 struct platform_device s3c64xx_device_iis0 = {
@@ -68,15 +69,20 @@ struct platform_device s3c64xx_device_iis0 = {
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
 	.resource	  = s3c64xx_iis0_resource,
 	.dev = {
-		.platform_data = &i2sv3_pdata,
+		.platform_data = &i2s0_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis0);
 
 static struct resource s3c64xx_iis1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_I2S1_OUT),
-	[2] = DEFINE_RES_DMA(DMACH_I2S1_IN),
+};
+
+static struct s3c_audio_pdata i2s1_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_playback = DMACH_I2S1_OUT,
+	.dma_capture = DMACH_I2S1_IN,
 };
 
 struct platform_device s3c64xx_device_iis1 = {
@@ -85,19 +91,20 @@ struct platform_device s3c64xx_device_iis1 = {
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
 	.resource	  = s3c64xx_iis1_resource,
 	.dev = {
-		.platform_data = &i2sv3_pdata,
+		.platform_data = &i2s1_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis1);
 
 static struct resource s3c64xx_iisv4_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_TX),
-	[2] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_RX),
 };
 
 static struct s3c_audio_pdata i2sv4_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_playback = DMACH_HSI_I2SV40_TX,
+	.dma_capture = DMACH_HSI_I2SV40_RX,
 	.type = {
 		.i2s = {
 			.quirks = QUIRK_PRI_6CHAN,
@@ -142,12 +149,13 @@ static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
 
 static struct resource s3c64xx_pcm0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
-	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 static struct s3c_audio_pdata s3c_pcm0_pdata = {
 	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_capture = DMACH_PCM0_RX,
+	.dma_playback = DMACH_PCM0_TX,
 };
 
 struct platform_device s3c64xx_device_pcm0 = {
@@ -163,12 +171,13 @@ EXPORT_SYMBOL(s3c64xx_device_pcm0);
 
 static struct resource s3c64xx_pcm1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
-	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 static struct s3c_audio_pdata s3c_pcm1_pdata = {
 	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_playback = DMACH_PCM1_TX,
+	.dma_capture = DMACH_PCM1_RX,
 };
 
 struct platform_device s3c64xx_device_pcm1 = {
@@ -196,13 +205,15 @@ static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
 
 static struct resource s3c64xx_ac97_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
-	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
-	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
-	[4] = DEFINE_RES_IRQ(IRQ_AC97),
+	[1] = DEFINE_RES_IRQ(IRQ_AC97),
 };
 
-static struct s3c_audio_pdata s3c_ac97_pdata;
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.dma_playback = DMACH_AC97_PCMOUT,
+	.dma_filter = pl08x_filter_id,
+	.dma_capture = DMACH_AC97_PCMIN,
+	.dma_capture_mic = DMACH_AC97_MICIN,
+};
 
 static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
 
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/mach-s3c64xx/dev-backlight.c
index 2157c5b53..e62e789f9 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/mach-s3c64xx/dev-backlight.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-samsung/dev-backlight.c
- *
+/*
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *              http://www.samsung.com
  *
@@ -18,7 +17,8 @@
 
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
+
+#include "backlight.h"
 
 struct samsung_bl_drvdata {
 	struct platform_pwm_backlight_data plat_data;
@@ -69,7 +69,6 @@ static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
 	.plat_data = {
 		.max_brightness = 255,
 		.dft_brightness = 255,
-		.pwm_period_ns  = 78770,
 		.enable_gpio    = -1,
 		.init           = samsung_bl_init,
 		.exit           = samsung_bl_exit,
@@ -111,7 +110,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	samsung_bl_data = &samsung_bl_drvdata->plat_data;
 
 	/* Copy board specific data provided by user */
-	samsung_bl_data->pwm_id = bl_data->pwm_id;
 	samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
 
 	if (bl_data->max_brightness)
@@ -120,8 +118,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
 	if (bl_data->lth_brightness)
 		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
-	if (bl_data->pwm_period_ns)
-		samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;
 	if (bl_data->enable_gpio >= 0)
 		samsung_bl_data->enable_gpio = bl_data->enable_gpio;
 	if (bl_data->init)
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index 46e18d77e..a0b4f0329 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -23,6 +23,7 @@
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
+#include <mach/irqs.h>
 
 #include <plat/devs.h>
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
deleted file mode 100644
index c9b95325b..000000000
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 096e14073..9c739eafe 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -14,38 +14,38 @@
 #define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
 
 /* DMA0/SDMA0 */
-#define DMACH_UART0		S3C64XX_DMA_CHAN("uart0_tx")
-#define DMACH_UART0_SRC2	S3C64XX_DMA_CHAN("uart0_rx")
-#define DMACH_UART1		S3C64XX_DMA_CHAN("uart1_tx")
-#define DMACH_UART1_SRC2	S3C64XX_DMA_CHAN("uart1_rx")
-#define DMACH_UART2		S3C64XX_DMA_CHAN("uart2_tx")
-#define DMACH_UART2_SRC2	S3C64XX_DMA_CHAN("uart2_rx")
-#define DMACH_UART3		S3C64XX_DMA_CHAN("uart3_tx")
-#define DMACH_UART3_SRC2	S3C64XX_DMA_CHAN("uart3_rx")
-#define DMACH_PCM0_TX		S3C64XX_DMA_CHAN("pcm0_tx")
-#define DMACH_PCM0_RX		S3C64XX_DMA_CHAN("pcm0_rx")
-#define DMACH_I2S0_OUT		S3C64XX_DMA_CHAN("i2s0_tx")
-#define DMACH_I2S0_IN		S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_UART0		"uart0_tx"
+#define DMACH_UART0_SRC2	"uart0_rx"
+#define DMACH_UART1		"uart1_tx"
+#define DMACH_UART1_SRC2	"uart1_rx"
+#define DMACH_UART2		"uart2_tx"
+#define DMACH_UART2_SRC2	"uart2_rx"
+#define DMACH_UART3		"uart3_tx"
+#define DMACH_UART3_SRC2	"uart3_rx"
+#define DMACH_PCM0_TX		"pcm0_tx"
+#define DMACH_PCM0_RX		"pcm0_rx"
+#define DMACH_I2S0_OUT		"i2s0_tx"
+#define DMACH_I2S0_IN		"i2s0_rx"
 #define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
 #define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
-#define DMACH_HSI_I2SV40_TX	S3C64XX_DMA_CHAN("i2s2_tx")
-#define DMACH_HSI_I2SV40_RX	S3C64XX_DMA_CHAN("i2s2_rx")
+#define DMACH_HSI_I2SV40_TX	"i2s2_tx"
+#define DMACH_HSI_I2SV40_RX	"i2s2_rx"
 
 /* DMA1/SDMA1 */
-#define DMACH_PCM1_TX		S3C64XX_DMA_CHAN("pcm1_tx")
-#define DMACH_PCM1_RX		S3C64XX_DMA_CHAN("pcm1_rx")
-#define DMACH_I2S1_OUT		S3C64XX_DMA_CHAN("i2s1_tx")
-#define DMACH_I2S1_IN		S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_PCM1_TX		"pcm1_tx"
+#define DMACH_PCM1_RX		"pcm1_rx"
+#define DMACH_I2S1_OUT		"i2s1_tx"
+#define DMACH_I2S1_IN		"i2s1_rx"
 #define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
 #define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
-#define DMACH_AC97_PCMOUT	S3C64XX_DMA_CHAN("ac97_out")
-#define DMACH_AC97_PCMIN	S3C64XX_DMA_CHAN("ac97_in")
-#define DMACH_AC97_MICIN	S3C64XX_DMA_CHAN("ac97_mic")
-#define DMACH_PWM		S3C64XX_DMA_CHAN("pwm")
-#define DMACH_IRDA		S3C64XX_DMA_CHAN("irda")
-#define DMACH_EXTERNAL		S3C64XX_DMA_CHAN("external")
-#define DMACH_SECURITY_RX	S3C64XX_DMA_CHAN("sec_rx")
-#define DMACH_SECURITY_TX	S3C64XX_DMA_CHAN("sec_tx")
+#define DMACH_AC97_PCMOUT	"ac97_out"
+#define DMACH_AC97_PCMIN	"ac97_in"
+#define DMACH_AC97_MICIN	"ac97_mic"
+#define DMACH_PWM		"pwm"
+#define DMACH_IRDA		"irda"
+#define DMACH_EXTERNAL		"external"
+#define DMACH_SECURITY_RX	"sec_rx"
+#define DMACH_SECURITY_TX	"sec_tx"
 
 enum dma_ch {
 	DMACH_MAX = 32
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
index 9c81fac3b..1d3636512 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
@@ -14,6 +14,8 @@
 #ifndef GPIO_SAMSUNG_S3C64XX_H
 #define GPIO_SAMSUNG_S3C64XX_H
 
+#ifdef CONFIG_GPIO_SAMSUNG
+
 /* GPIO bank sizes */
 #define S3C64XX_GPIO_A_NR	(8)
 #define S3C64XX_GPIO_B_NR	(7)
@@ -90,5 +92,6 @@ enum s3c_gpio_number {
 /* define the number of gpios we need to the one after the GPQ() range */
 #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
 
+#endif /* GPIO_SAMSUNG */
 #endif /* GPIO_SAMSUNG_S3C64XX_H */
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 67bbd1dd0..3ceb00b5d 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -156,25 +156,11 @@
 
 #define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
 
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
+/* Some boards have their own IRQs behind this */
 #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
 
-#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 160
-#elif defined(CONFIG_SMDK6410_WM1190_EV1)
-#define IRQ_BOARD_NR 64
-#elif defined(CONFIG_SMDK6410_WM1192_EV1)
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS	(IRQ_BOARD_END + 1)
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS	IRQ_BOARD_START
 
 /* Compatibility */
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index f55ccb1ce..d51873e8f 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -99,7 +99,7 @@
 
 #define S3C64XX_PA_USB_HSPHY	(0x7C100000)
 
-/* compatibiltiy defines. */
+/* compatibility defines. */
 #define S3C_PA_TIMER		S3C64XX_PA_TIMER
 #define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
 #define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index a30a1e3ff..4a285e97a 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -16,8 +16,11 @@
 #define __MACH_S3C64XX_PM_CORE_H __FILE__
 
 #include <linux/serial_s3c.h>
+#include <linux/delay.h>
 
 #include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/map.h>
 
 static inline void s3c_pm_debug_init_uart(void)
 {
@@ -56,9 +59,13 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
 
 /* make these defines, we currently do not have any need to change
  * the IRQ wake controls depending on the CPU we are running on */
-
+#ifdef CONFIG_PM_SLEEP
 #define s3c_irqwake_eintallow	((1 << 28) - 1)
 #define s3c_irqwake_intallow	(~0)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow  0
+#endif
 
 static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 					   struct pm_uart_save *save)
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index ae4ea7601..0bbf1faae 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -113,7 +113,7 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
 static __init int s3c64xx_syscore_init(void)
 {
 	/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
 	register_syscore_ops(&s3c64xx_irq_syscore_ops);
diff --git a/arch/arm/plat-samsung/include/plat/irq-uart.h b/arch/arm/mach-s3c64xx/irq-uart.h
index a9331e49b..4b2961329 100644
--- a/arch/arm/plat-samsung/include/plat/irq-uart.h
+++ b/arch/arm/mach-s3c64xx/irq-uart.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-samsung/include/plat/irq-uart.h
- *
+/*
  * Copyright (c) 2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 6224c67f5..347ce6009 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -47,6 +47,7 @@
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <mach/irqs.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 #include <plat/samsung-time.h>
@@ -229,7 +230,7 @@ static void __init anw6410_machine_init(void)
 MACHINE_START(ANW6410, "A&W6410")
 	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= anw6410_map_io,
 	.init_machine	= anw6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 9c00d83f7..571f95cc5 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,6 +29,9 @@
 
 #include <linux/platform_data/spi-s3c64xx.h>
 
+#include <plat/cpu.h>
+#include <mach/irqs.h>
+
 #include "crag6410.h"
 
 static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
@@ -399,6 +402,9 @@ static struct i2c_driver wlf_gf_module_driver = {
 
 static int __init wlf_gf_module_register(void)
 {
+	if (!soc_is_s3c64xx())
+		return 0;
+
 	return i2c_add_driver(&wlf_gf_module_driver);
 }
 device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 65c426bc4..d9d0440ae 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -25,10 +25,11 @@
 #include <linux/mmc/host.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/dm9000.h>
 #include <linux/gpio_keys.h>
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/spi/spi.h>
 
 #include <linux/platform_data/pca953x.h>
@@ -51,6 +52,7 @@
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
 
 #include <plat/fb.h>
 #include <plat/sdhci.h>
@@ -108,11 +110,14 @@ static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
 	},
 };
 
+static struct pwm_lookup crag6410_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data crag6410_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.pwm_period_ns	= 100000,	/* about 1kHz */
 	.enable_gpio	= -1,
 };
 
@@ -809,7 +814,7 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
 	.num_leds = ARRAY_SIZE(gpio_leds),
 };
 
-static struct s3c_hsotg_plat crag6410_hsotg_pdata;
+static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
 
 static void __init crag6410_machine_init(void)
 {
@@ -835,7 +840,7 @@ static void __init crag6410_machine_init(void)
 	s3c_i2c0_set_platdata(&i2c0_pdata);
 	s3c_i2c1_set_platdata(&i2c1_pdata);
 	s3c_fb_set_platdata(&crag6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&crag6410_hsotg_pdata);
+	dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata);
 
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
@@ -843,6 +848,7 @@ static void __init crag6410_machine_init(void)
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
 	s3c64xx_spi0_set_platdata(NULL, 0, 2);
 
+	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
 
 	gpio_led_register_device(-1, &gpio_leds_pdata);
@@ -855,6 +861,7 @@ static void __init crag6410_machine_init(void)
 MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
 	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= crag6410_map_io,
 	.init_machine	= crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index e4b087c58..bc7dc1fcb 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -30,6 +31,7 @@
 #include <video/samsung_fimd.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
+#include <mach/irqs.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -73,6 +75,11 @@ static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
 	},
 };
 
+static struct pwm_lookup hmt_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+		   1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
+};
+
 static int hmt_bl_init(struct device *dev)
 {
 	int ret;
@@ -110,10 +117,8 @@ static void hmt_bl_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data hmt_backlight_data = {
-	.pwm_id		= 1,
 	.max_brightness	= 100 * 256,
 	.dft_brightness	= 40 * 256,
-	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
 	.enable_gpio	= -1,
 	.init		= hmt_bl_init,
 	.notify		= hmt_bl_notify,
@@ -268,12 +273,14 @@ static void __init hmt_machine_init(void)
 	gpio_request(S3C64XX_GPF(13), "usb power");
 	gpio_direction_output(S3C64XX_GPF(13), 1);
 
+	pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
 	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
 }
 
 MACHINE_START(HMT, "Airgoo-HMT")
 	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= hmt_map_io,
 	.init_machine	= hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index ab61af50b..ae999fb3f 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -41,6 +41,7 @@
 #include <linux/platform_data/mmc-sdhci-s3c.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
+#include <mach/irqs.h>
 
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
@@ -233,7 +234,6 @@ static struct platform_device *mini6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&mini6410_lcd_powerdev,
 	&s3c_device_adc,
-	&s3c_device_ts,
 };
 
 static void __init mini6410_map_io(void)
@@ -332,7 +332,7 @@ static void __init mini6410_machine_init(void)
 	s3c_nand_set_platdata(&mini6410_nand_info);
 	s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
 	s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
-	s3c24xx_ts_set_platdata(NULL);
+	s3c64xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 
@@ -363,6 +363,7 @@ static void __init mini6410_machine_init(void)
 MACHINE_START(MINI6410, "MINI6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= mini6410_map_io,
 	.init_machine	= mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 80cb1446f..23baaa043 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -31,6 +31,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
@@ -100,6 +101,7 @@ static void __init ncp_machine_init(void)
 MACHINE_START(NCP, "NCP")
 	/* Maintainer: Samsung Electronics */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= ncp_map_io,
 	.init_machine	= ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 85fa9598b..4e240ffa7 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -33,6 +33,7 @@
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>
@@ -202,7 +203,6 @@ static struct platform_device *real6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_nand,
 	&s3c_device_adc,
-	&s3c_device_ts,
 	&s3c_device_ohci,
 };
 
@@ -301,7 +301,7 @@ static void __init real6410_machine_init(void)
 
 	s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
 	s3c_nand_set_platdata(&real6410_nand_info);
-	s3c24xx_ts_set_platdata(NULL);
+	s3c64xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 
@@ -331,7 +331,7 @@ static void __init real6410_machine_init(void)
 MACHINE_START(REAL6410, "REAL6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= real6410_map_io,
 	.init_machine	= real6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
index 2fddf3819..5bf9afae7 100644
--- a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
+++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
@@ -8,18 +8,15 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/of_platform.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 
 #include <plat/cpu.h>
-#include <plat/watchdog-reset.h>
-
 #include <mach/map.h>
 
 #include "common.h"
+#include "watchdog-reset.h"
 
 /*
  * IO mapping for shared system controller IP.
@@ -49,7 +46,6 @@ static void __init s3c64xx_dt_map_io(void)
 static void __init s3c64xx_dt_init_machine(void)
 {
 	samsung_wdt_reset_of_init();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
@@ -61,7 +57,7 @@ static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
 	soft_restart(0);
 }
 
-static char const *s3c64xx_dt_compat[] __initdata = {
+static const char *const s3c64xx_dt_compat[] __initconst = {
 	"samsung,s3c6400",
 	"samsung,s3c6410",
 	NULL
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index b3d13537a..e0e1a729e 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -12,8 +12,10 @@
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
@@ -41,6 +43,7 @@
 #include <plat/samsung-time.h>
 
 #include "common.h"
+#include "mach-smartq.h"
 #include "regs-modem.h"
 
 #define UCON S3C2410_UCON_DEFAULT
@@ -139,6 +142,11 @@ static struct platform_device smartq_usb_otg_vbus_dev = {
 	.dev.platform_data	= &smartq_usb_otg_vbus_pdata,
 };
 
+static struct pwm_lookup smartq_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+		   1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
+};
+
 static int smartq_bl_init(struct device *dev)
 {
     s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
@@ -147,10 +155,8 @@ static int smartq_bl_init(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data smartq_backlight_data = {
-	.pwm_id		= 1,
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.pwm_period_ns	= 1000000000 / (1000 * 20),
 	.enable_gpio	= -1,
 	.init		= smartq_bl_init,
 };
@@ -189,7 +195,7 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
 	},
 };
 
-static struct s3c_hsotg_plat smartq_hsotg_pdata;
+static struct dwc2_hsotg_plat smartq_hsotg_pdata;
 
 static int __init smartq_lcd_setup_gpio(void)
 {
@@ -248,7 +254,6 @@ static struct platform_device *smartq_devices[] __initdata = {
 	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&samsung_device_pwm,
-	&s3c_device_ts,
 	&s3c_device_usb_hsotg,
 	&s3c64xx_device_iis0,
 	&smartq_backlight_device,
@@ -379,14 +384,23 @@ void __init smartq_map_io(void)
 	smartq_lcd_mode_set();
 }
 
+static struct gpiod_lookup_table smartq_audio_gpios = {
+	.dev_id = "smartq-audio",
+	.table = {
+		GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
+		GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
+		{ },
+	},
+};
+
 void __init smartq_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
-	s3c_hsotg_set_platdata(&smartq_hsotg_pdata);
+	dwc2_hsotg_set_platdata(&smartq_hsotg_pdata);
 	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
 	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+	s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
 
 	i2c_register_board_info(0, smartq_i2c_devs,
 				ARRAY_SIZE(smartq_i2c_devs));
@@ -396,5 +410,9 @@ void __init smartq_machine_init(void)
 	WARN_ON(smartq_usb_host_init());
 	WARN_ON(smartq_wifi_init());
 
+	pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
 	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
+
+	gpiod_add_lookup_table(&smartq_audio_gpios);
+	platform_device_register_simple("smartq-audio", -1, NULL, 0);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 33224ab36..0972b6ce0 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -21,6 +21,7 @@
 #include <asm/mach/arch.h>
 
 #include <video/samsung_fimd.h>
+#include <mach/irqs.h>
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
@@ -153,6 +154,7 @@ static void __init smartq5_machine_init(void)
 MACHINE_START(SMARTQ5, "SmartQ 5")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index fc7fece22..51ac1c6c6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -21,6 +21,7 @@
 #include <asm/mach/arch.h>
 
 #include <video/samsung_fimd.h>
+#include <mach/irqs.h>
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
@@ -169,6 +170,7 @@ static void __init smartq7_machine_init(void)
 MACHINE_START(SMARTQ7, "SmartQ 7")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 6f425126a..7d8a74fd8 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -27,6 +27,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
@@ -88,7 +89,7 @@ static void __init smdk6400_machine_init(void)
 MACHINE_START(SMDK6400, "SMDK6400")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6400_init_irq,
 	.map_io		= smdk6400_map_io,
 	.init_machine	= smdk6400_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index b7447a922..92ec8c3b4 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -30,6 +30,7 @@
 #include <linux/smsc911x.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
@@ -51,6 +52,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <mach/map.h>
 
 #include <asm/irq.h>
@@ -68,9 +70,9 @@
 #include <plat/adc.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/keypad.h>
-#include <plat/backlight.h>
 #include <plat/samsung-time.h>
 
+#include "backlight.h"
 #include "common.h"
 #include "regs-modem.h"
 #include "regs-srom.h"
@@ -214,7 +216,7 @@ static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
 	REGULATOR_SUPPLY("AVDD", "0-001b"),
 };
 
-static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = {
 	.constraints = {
 		.always_on = 1,
 	},
@@ -288,7 +290,6 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_cfcon,
 	&s3c_device_rtc,
-	&s3c_device_ts,
 	&s3c_device_wdt,
 };
 
@@ -299,7 +300,7 @@ static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
 };
 
 /* VDDARM, BUCK1 on J5 */
-static struct regulator_init_data smdk6410_vddarm = {
+static struct regulator_init_data __maybe_unused smdk6410_vddarm = {
 	.constraints = {
 		.name = "PVDD_ARM",
 		.min_uV = 1000000,
@@ -312,7 +313,7 @@ static struct regulator_init_data smdk6410_vddarm = {
 };
 
 /* VDD_INT, BUCK2 on J5 */
-static struct regulator_init_data smdk6410_vddint = {
+static struct regulator_init_data __maybe_unused smdk6410_vddint = {
 	.constraints = {
 		.name = "PVDD_INT",
 		.min_uV = 1000000,
@@ -323,7 +324,7 @@ static struct regulator_init_data smdk6410_vddint = {
 };
 
 /* VDD_HI, LDO3 on J5 */
-static struct regulator_init_data smdk6410_vddhi = {
+static struct regulator_init_data __maybe_unused smdk6410_vddhi = {
 	.constraints = {
 		.name = "PVDD_HI",
 		.always_on = 1,
@@ -331,7 +332,7 @@ static struct regulator_init_data smdk6410_vddhi = {
 };
 
 /* VDD_PLL, LDO2 on J5 */
-static struct regulator_init_data smdk6410_vddpll = {
+static struct regulator_init_data __maybe_unused smdk6410_vddpll = {
 	.constraints = {
 		.name = "PVDD_PLL",
 		.always_on = 1,
@@ -339,7 +340,7 @@ static struct regulator_init_data smdk6410_vddpll = {
 };
 
 /* VDD_UH_MMC, LDO5 on J5 */
-static struct regulator_init_data smdk6410_vdduh_mmc = {
+static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = {
 	.constraints = {
 		.name = "PVDD_UH+PVDD_MMC",
 		.always_on = 1,
@@ -347,7 +348,7 @@ static struct regulator_init_data smdk6410_vdduh_mmc = {
 };
 
 /* VCCM3BT, LDO8 on J5 */
-static struct regulator_init_data smdk6410_vccmc3bt = {
+static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = {
 	.constraints = {
 		.name = "PVCCM3BT",
 		.always_on = 1,
@@ -355,7 +356,7 @@ static struct regulator_init_data smdk6410_vccmc3bt = {
 };
 
 /* VCCM2MTV, LDO11 on J5 */
-static struct regulator_init_data smdk6410_vccm2mtv = {
+static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = {
 	.constraints = {
 		.name = "PVCCM2MTV",
 		.always_on = 1,
@@ -363,7 +364,7 @@ static struct regulator_init_data smdk6410_vccm2mtv = {
 };
 
 /* VDD_LCD, LDO12 on J5 */
-static struct regulator_init_data smdk6410_vddlcd = {
+static struct regulator_init_data __maybe_unused smdk6410_vddlcd = {
 	.constraints = {
 		.name = "PVDD_LCD",
 		.always_on = 1,
@@ -371,7 +372,7 @@ static struct regulator_init_data smdk6410_vddlcd = {
 };
 
 /* VDD_OTGI, LDO9 on J5 */
-static struct regulator_init_data smdk6410_vddotgi = {
+static struct regulator_init_data __maybe_unused smdk6410_vddotgi = {
 	.constraints = {
 		.name = "PVDD_OTGI",
 		.always_on = 1,
@@ -379,7 +380,7 @@ static struct regulator_init_data smdk6410_vddotgi = {
 };
 
 /* VDD_OTG, LDO14 on J5 */
-static struct regulator_init_data smdk6410_vddotg = {
+static struct regulator_init_data __maybe_unused smdk6410_vddotg = {
 	.constraints = {
 		.name = "PVDD_OTG",
 		.always_on = 1,
@@ -387,7 +388,7 @@ static struct regulator_init_data smdk6410_vddotg = {
 };
 
 /* VDD_ALIVE, LDO15 on J5 */
-static struct regulator_init_data smdk6410_vddalive = {
+static struct regulator_init_data __maybe_unused smdk6410_vddalive = {
 	.constraints = {
 		.name = "PVDD_ALIVE",
 		.always_on = 1,
@@ -395,7 +396,7 @@ static struct regulator_init_data smdk6410_vddalive = {
 };
 
 /* VDD_AUDIO, VLDO_AUDIO on J5 */
-static struct regulator_init_data smdk6410_vddaudio = {
+static struct regulator_init_data __maybe_unused smdk6410_vddaudio = {
 	.constraints = {
 		.name = "PVDD_AUDIO",
 		.always_on = 1,
@@ -405,7 +406,7 @@ static struct regulator_init_data smdk6410_vddaudio = {
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 /* S3C64xx internal logic & PLL */
-static struct regulator_init_data wm8350_dcdc1_data = {
+static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = {
 	.constraints = {
 		.name = "PVDD_INT+PVDD_PLL",
 		.min_uV = 1200000,
@@ -416,7 +417,7 @@ static struct regulator_init_data wm8350_dcdc1_data = {
 };
 
 /* Memory */
-static struct regulator_init_data wm8350_dcdc3_data = {
+static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = {
 	.constraints = {
 		.name = "PVDD_MEM",
 		.min_uV = 1800000,
@@ -436,7 +437,7 @@ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
 	REGULATOR_SUPPLY("DVDD", "0-001b"),
 };
 
-static struct regulator_init_data wm8350_dcdc4_data = {
+static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = {
 	.constraints = {
 		.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
 		.min_uV = 3000000,
@@ -448,7 +449,7 @@ static struct regulator_init_data wm8350_dcdc4_data = {
 };
 
 /* OTGi/1190-EV1 HPVDD & AVDD */
-static struct regulator_init_data wm8350_ldo4_data = {
+static struct regulator_init_data __maybe_unused wm8350_ldo4_data = {
 	.constraints = {
 		.name = "PVDD_OTGI+HPVDD+AVDD",
 		.min_uV = 1200000,
@@ -536,7 +537,7 @@ static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
 	.max_uA = 27554,
 };
 
-static struct regulator_init_data wm1192_dcdc3 = {
+static struct regulator_init_data __maybe_unused wm1192_dcdc3 = {
 	.constraints = {
 		.name = "PVDD_MEM+PVDD_GPS",
 		.always_on = 1,
@@ -547,7 +548,7 @@ static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
 	REGULATOR_SUPPLY("DVDD", "0-001b"),   /* WM8580 */
 };
 
-static struct regulator_init_data wm1192_ldo1 = {
+static struct regulator_init_data __maybe_unused wm1192_ldo1 = {
 	.constraints = {
 		.name = "PVDD_LCD+PVDD_EXT",
 		.always_on = 1,
@@ -623,12 +624,16 @@ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
 	.func = S3C_GPIO_SFN(2),
 };
 
+static struct pwm_lookup smdk6410_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data smdk6410_bl_data = {
-	.pwm_id = 1,
 	.enable_gpio = -1,
 };
 
-static struct s3c_hsotg_plat smdk6410_hsotg_pdata;
+static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;
 
 static void __init smdk6410_map_io(void)
 {
@@ -659,11 +664,11 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
+	dwc2_hsotg_set_platdata(&smdk6410_hsotg_pdata);
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 
-	s3c24xx_ts_set_platdata(NULL);
+	s3c64xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 
@@ -695,13 +700,14 @@ static void __init smdk6410_machine_init(void)
 
 	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
 
+	pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
 	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
 }
 
 MACHINE_START(SMDK6410, "SMDK6410")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smdk6410_map_io,
 	.init_machine	= smdk6410_machine_init,
diff --git a/arch/arm/plat-samsung/include/plat/onenand-core.h b/arch/arm/mach-s3c64xx/onenand-core.h
index 7701cb702..925eb13bb 100644
--- a/arch/arm/plat-samsung/include/plat/onenand-core.h
+++ b/arch/arm/mach-s3c64xx/onenand-core.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/plat-samsung/onenand-core.h
- *
  *  Copyright (c) 2010 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *  Marek Szyprowski <m.szyprowski@samsung.com>
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
index 901a984bd..89c5a6283 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -14,6 +14,7 @@
 #include <linux/amba/pl08x.h>
 #include <linux/of.h>
 
+#include <plat/cpu.h>
 #include <mach/irqs.h>
 #include <mach/map.h>
 
@@ -230,6 +231,9 @@ static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
 
 static int __init s3c64xx_pl080_init(void)
 {
+	if (!soc_is_s3c64xx())
+		return 0;
+
 	/* Set all DMA configuration to be DMA, not SDMA */
 	writel(0xffffff, S3C64XX_SDMA_SEL);
 
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 75b14e756..59d91b83b 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -22,6 +22,7 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
+#include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/wakeup-mask.h>
@@ -332,6 +333,9 @@ int __init s3c64xx_pm_init(void)
 
 static __init int s3c64xx_pm_initcall(void)
 {
+	if (!soc_is_s3c64xx())
+		return 0;
+
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
 
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h b/arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h
index fcf279662..eae3c311e 100644
--- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 1ce48c54c..5ea82accc 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -41,9 +41,9 @@
 #include <plat/devs.h>
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
-#include <plat/onenand-core.h>
 
 #include "common.h"
+#include "onenand-core.h"
 
 void __init s3c6400_map_io(void)
 {
@@ -81,7 +81,7 @@ static struct device s3c6400_dev = {
 static int __init s3c6400_core_init(void)
 {
 	/* Not applicable when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || soc_is_s3c64xx())
 		return 0;
 
 	return subsys_system_register(&s3c6400_subsys, NULL);
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index b2a793054..92bb927c4 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -41,12 +41,12 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
-#include <plat/ata-core.h>
 #include <plat/adc-core.h>
 #include <plat/iic-core.h>
-#include <plat/onenand-core.h>
 
+#include "ata-core.h"
 #include "common.h"
+#include "onenand-core.h"
 
 void __init s3c6410_map_io(void)
 {
@@ -84,7 +84,7 @@ static struct device s3c6410_dev = {
 static int __init s3c6410_core_init(void)
 {
 	/* Not applicable when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
 	return subsys_system_register(&s3c6410_subsys, NULL);
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index ca960bda0..2b17b7f51 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -16,10 +16,10 @@
 #include <linux/platform_device.h>
 #include <mach/map.h>
 #include <plat/cpu.h>
-#include <plat/regs-usb-hsotg-phy.h>
 #include <plat/usb-phy.h>
 
 #include "regs-sys.h"
+#include "regs-usb-hsotg-phy.h"
 
 static int s3c_usb_otgphy_init(struct platform_device *pdev)
 {
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/mach-s3c64xx/watchdog-reset.h
index 0386b8f76..42707dfbd 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/mach-s3c64xx/watchdog-reset.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
- *
+/*
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 330bfc8fc..4cec11cf5 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -8,12 +8,13 @@
 # Configuration options for the S5PV210/S5PC110
 
 config ARCH_S5PV210
-	bool "Samsung S5PV210/S5PC110" if ARCH_MULTI_V7
+	bool "Samsung S5PV210/S5PC110"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK_SAMSUNG
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 72b9e9671..fa7fb716e 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -5,7 +5,7 @@
 #
 # Licensed under GPLv2
 
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/arch/arm/plat-samsung/include
 
 # Core
 
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index c6f6ed1cb..36e3c79f4 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -61,10 +61,7 @@ config SA1100_H3100
 	select MFD_IPAQ_MICRO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3100 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
+	  H3100 handheld computer.
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
@@ -73,10 +70,7 @@ config SA1100_H3600
 	select MFD_IPAQ_MICRO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3600 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
+	  H3600 and H3700 handheld computers.
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index cbf53bb9c..0db46895c 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(struct clk *clk)
 }
 
 static struct clkops clk_36864_ops = {
+	.enable		= clk_cpu_enable,
+	.disable	= clk_cpu_disable,
 	.get_rate	= clk_36864_get_rate,
 };
 
@@ -140,9 +142,8 @@ static struct clk_lookup sa11xx_clkregs[] = {
 	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
 };
 
-static int __init sa11xx_clk_init(void)
+int __init sa11xx_clk_init(void)
 {
 	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
-core_initcall(sa11xx_clk_init);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 345e63f4e..3e09beddb 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -34,6 +34,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -95,6 +96,8 @@ static void sa1100_power_off(void)
 
 void sa11x0_restart(enum reboot_mode mode, const char *cmd)
 {
+	clear_reset_status(RESET_STATUS_ALL);
+
 	if (mode == REBOOT_SOFT) {
 		/* Jump into ROM at address 0 */
 		soft_restart(0);
@@ -388,6 +391,7 @@ void __init sa1100_init_irq(void)
 	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
 
 	sa1100_init_gpio();
+	sa11xx_clk_init();
 }
 
 /*
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 0d92e119b..68199b603 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -44,3 +44,5 @@ int sa11x0_pm_init(void);
 #else
 static inline int sa11x0_pm_init(void) { return 0; }
 #endif
+
+int sa11xx_clk_init(void);
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 0ac6cc08a..7972617cc 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -858,40 +858,6 @@
 
 
 /*
- * Real-Time Clock (RTC) control registers
- *
- * Registers
- *    RTAR      	Real-Time Clock (RTC) Alarm Register (read/write).
- *    RCNR      	Real-Time Clock (RTC) CouNt Register (read/write).
- *    RTTR      	Real-Time Clock (RTC) Trim Register (read/write).
- *    RTSR      	Real-Time Clock (RTC) Status Register (read/write).
- *
- * Clocks
- *    frtx, Trtx	Frequency, period of the real-time clock crystal
- *              	(32.768 kHz nominal).
- *    frtc, Trtc	Frequency, period of the real-time clock counter
- *              	(1 Hz nominal).
- */
-
-#define RTAR		__REG(0x90010000)  /* RTC Alarm Reg. */
-#define RCNR		__REG(0x90010004)  /* RTC CouNt Reg. */
-#define RTTR		__REG(0x90010008)  /* RTC Trim Reg. */
-#define RTSR		__REG(0x90010010)  /* RTC Status Reg. */
-
-#define RTTR_C  	Fld (16, 0)	/* clock divider Count - 1         */
-#define RTTR_D  	Fld (10, 16)	/* trim Delete count               */
-                	        	/* frtc = (1023*(C + 1) - D)*frtx/ */
-                	        	/*        (1023*(C + 1)^2)         */
-                	        	/* Trtc = (1023*(C + 1)^2)*Trtx/   */
-                	        	/*        (1023*(C + 1) - D)       */
-
-#define RTSR_AL 	0x00000001	/* ALarm detected                  */
-#define RTSR_HZ 	0x00000002	/* 1 Hz clock detected             */
-#define RTSR_ALE	0x00000004	/* ALarm interrupt Enable          */
-#define RTSR_HZE	0x00000008	/* 1 Hz clock interrupt Enable     */
-
-
-/*
  * Power Manager (PM) control registers
  *
  * Registers
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
index 73093dc89..a1a041b97 100644
--- a/arch/arm/mach-sa1100/include/mach/uncompress.h
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -19,7 +19,7 @@
 
 #define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
 
-static void putc(int c)
+static inline void putc(int c)
 {
 	unsigned long serial_port;
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 99d9a3b1b..8411985af 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -166,7 +166,7 @@ static struct sa1100_port_fns neponset_port_fns = {
  * ensure that the IRQ signal is deasserted before returning.  This
  * is rather unfortunate.
  */
-static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void neponset_irq_handler(struct irq_desc *desc)
 {
 	struct neponset_drvdata *d = irq_desc_get_handler_data(desc);
 	unsigned int irr;
@@ -320,10 +320,10 @@ static int neponset_probe(struct platform_device *dev)
 
 	irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip,
 		handle_simple_irq);
-	set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE);
+	irq_clear_status_flags(d->irq_base + NEP_IRQ_SMC91X, IRQ_NOREQUEST | IRQ_NOPROBE);
 	irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip,
 		handle_simple_irq);
-	set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE);
+	irq_clear_status_flags(d->irq_base + NEP_IRQ_USAR, IRQ_NOREQUEST | IRQ_NOPROBE);
 	irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip);
 
 	irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 1525d7b5f..88149f85b 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -45,7 +45,7 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_16BIT | SMC91X_USE_8BIT | SMC91X_NOWAIT,
 };
 
 static struct platform_device smc91x_device = {
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 41e476e57..bb3ca9c76 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -15,7 +15,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -98,8 +98,8 @@ static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	if (offset > 15)
-		return simpad_get_cs3_ro() & (1 << (offset - 16));
-	return simpad_get_cs3_shadow() & (1 << offset);
+		return !!(simpad_get_cs3_ro() & (1 << (offset - 16)));
+	return !!(simpad_get_cs3_shadow() & (1 << offset));
 };
 
 static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -369,7 +369,7 @@ static int __init simpad_init(void)
 	cs3_gpio.get = cs3_gpio_get;
 	cs3_gpio.direction_input = cs3_gpio_direction_input;
 	cs3_gpio.direction_output = cs3_gpio_direction_output;
-	ret = gpiochip_add(&cs3_gpio);
+	ret = gpiochip_add_data(&cs3_gpio, NULL);
 	if (ret)
 		printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");
 
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 45006479d..4a48c9f5f 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,46 +1,50 @@
 config ARCH_SHMOBILE
 	bool
-	select ZONE_DMA if ARM_LPAE
 
-config PM_RCAR
+config ARCH_SHMOBILE_MULTI
 	bool
 
 config PM_RMOBILE
 	bool
+	select PM
 	select PM_GENERIC_DOMAINS
 
 config ARCH_RCAR_GEN1
 	bool
-	select PM_RCAR if PM || SMP
+	select PM
+	select PM_GENERIC_DOMAINS
 	select RENESAS_INTC_IRQPIN
 	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_RCAR_GEN2
 	bool
-	select PM_RCAR if PM || SMP
+	select PM
+	select PM_GENERIC_DOMAINS
 	select RENESAS_IRQC
 	select SYS_SUPPORTS_SH_CMT
 	select PCI_DOMAINS if PCI
 
 config ARCH_RMOBILE
 	bool
-	select PM_RMOBILE if PM
+	select PM_RMOBILE
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU
 
-menuconfig ARCH_SHMOBILE_MULTI
-	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
-	depends on MMU
+menuconfig ARCH_RENESAS
+	bool "Renesas ARM SoCs"
+	depends on ARCH_MULTI_V7 && MMU
 	select ARCH_SHMOBILE
+	select ARCH_SHMOBILE_MULTI
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ARM_GIC
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select NO_IOPORT_MAP
 	select PINCTRL
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
+	select ZONE_DMA if ARM_LPAE
 
-if ARCH_SHMOBILE_MULTI
+if ARCH_RENESAS
 
 #comment "Renesas ARM SoCs System Type"
 
@@ -50,6 +54,8 @@ config ARCH_EMEV2
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
+	select PM
+	select PM_GENERIC_DOMAINS
 	select SYS_SUPPORTS_SH_MTU2
 
 config ARCH_R8A73A4
@@ -80,134 +86,21 @@ config ARCH_R8A7791
 	select ARCH_RCAR_GEN2
 	select I2C
 
-config ARCH_R8A7794
-	bool "R-Car E2 (R8A77940)"
+config ARCH_R8A7792
+	bool "R-Car V2H (R8A77920)"
 	select ARCH_RCAR_GEN2
 
-config ARCH_SH73A0
-	bool "SH-Mobile AG5 (R8A73A00)"
-	select ARCH_RMOBILE
-	select RENESAS_INTC_IRQPIN
-
-comment "Renesas ARM SoCs Board Type"
-
-config MACH_MARZEN
-	bool "MARZEN board"
-	depends on ARCH_R8A7779
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-comment "Renesas ARM SoCs System Configuration"
-endif
-
-if ARCH_SHMOBILE_LEGACY
+config ARCH_R8A7793
+	bool "R-Car M2-N (R8A7793)"
+	select ARCH_RCAR_GEN2
+	select I2C
 
-comment "Renesas ARM SoCs System Type"
+config ARCH_R8A7794
+	bool "R-Car E2 (R8A77940)"
+	select ARCH_RCAR_GEN2
 
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
 	select ARCH_RMOBILE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select I2C
-	select SH_INTC
 	select RENESAS_INTC_IRQPIN
-
-config ARCH_R8A7740
-	bool "R-Mobile A1 (R8A77400)"
-	select ARCH_RMOBILE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select RENESAS_INTC_IRQPIN
-
-config ARCH_R8A7778
-	bool "R-Car M1A (R8A77781)"
-	select ARCH_RCAR_GEN1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-
-config ARCH_R8A7779
-	bool "R-Car H1 (R8A77790)"
-	select ARCH_RCAR_GEN1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-
-comment "Renesas ARM SoCs Board Type"
-
-config MACH_ARMADILLO800EVA
-	bool "Armadillo-800 EVA board"
-	depends on ARCH_R8A7740
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SH_ETH
-	select SND_SOC_WM8978 if SND_SIMPLE_CARD && I2C
-	select USE_OF
-
-config MACH_BOCKW
-	bool "BOCK-W platform"
-	depends on ARCH_R8A7778
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4554 if SND_SIMPLE_CARD
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
-	select USE_OF
-
-config MACH_BOCKW_REFERENCE
-	bool "BOCK-W  - Reference Device Tree Implementation"
-	depends on ARCH_R8A7778
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select USE_OF
-	---help---
-	   Use reference implementation of BockW board support
-	   which makes use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
-config MACH_MARZEN
-	bool "MARZEN board"
-	depends on ARCH_R8A7779
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select USE_OF
-
-config MACH_KZM9G
-	bool "KZM-A9-GT board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-	select USE_OF
-
-comment "Renesas ARM SoCs System Configuration"
-
-config CPU_HAS_INTEVT
-        bool
-	default y
-
-config SH_CLK_CPG
-	bool
-
-source "drivers/sh/Kconfig"
-
-endif
-
-if ARCH_SHMOBILE
-
-menu "Timer and clock configuration"
-
-config SHMOBILE_TIMER_HZ
-	int "Kernel HZ (jiffies per second)"
-	range 32 1024
-	default "128"
-	help
-	  Allows the configuration of the timer frequency. It is customary
-	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
-	  case of low timer frequencies other values may be more suitable.
-	  Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
-	  want to select a HZ value such as 128 that can evenly divide RCLK.
-	  A HZ value that does not divide evenly may cause timer drift.
-
-endmenu
-
 endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 89e463de4..3fc48b02e 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,29 +3,22 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o
+obj-y				:= timer.o
 
 # CPU objects
-obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o pm-sh73a0.o
+obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o pm-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o pm-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o
+obj-$(CONFIG_ARCH_R8A7792)	+= setup-r8a7792.o
+obj-$(CONFIG_ARCH_R8A7793)	+= setup-r8a7793.o
 obj-$(CONFIG_ARCH_R8A7794)	+= setup-r8a7794.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
-# Clock objects
-ifndef CONFIG_COMMON_CLK
-obj-y				+= clock.o
-obj-$(CONFIG_ARCH_SH73A0)	+= clock-sh73a0.o
-obj-$(CONFIG_ARCH_R8A7740)	+= clock-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
-endif
-
 # CPU reset vector handling objects
 cpu-y				:= platsmp.o headsmp.o
 
@@ -34,6 +27,7 @@ obj-$(CONFIG_ARCH_RCAR_GEN2)	+= setup-rcar-gen2.o platsmp-apmu.o $(cpu-y)
 CFLAGS_setup-rcar-gen2.o	+= -march=armv7-a
 obj-$(CONFIG_ARCH_R8A7790)	+= regulator-quirk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7791)	+= regulator-quirk-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7793)	+= regulator-quirk-rcar-gen2.o
 
 # SMP objects
 smp-y				:= $(cpu-y)
@@ -45,21 +39,8 @@ smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # PM objects
 obj-$(CONFIG_SUSPEND)		+= suspend.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
-obj-$(CONFIG_PM_RCAR)		+= pm-rcar.o
 obj-$(CONFIG_PM_RMOBILE)	+= pm-rmobile.o
 obj-$(CONFIG_ARCH_RCAR_GEN2)	+= pm-rcar-gen2.o
 
-# Board objects
-ifdef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_MARZEN)	+= board-marzen-reference.o
-else
-obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
-obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
-obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
-obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
-obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o intc-sh73a0.o
-endif
-
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
deleted file mode 100644
index e1ef19cef..000000000
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ /dev/null
@@ -1,15 +0,0 @@
-# per-board load address for uImage
-loadaddr-y	:=
-loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
-loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
-loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
-
-__ZRELADDR	:= $(sort $(loadaddr-y))
-   zreladdr-y   += $(__ZRELADDR)
-
-# Unsupported legacy stuff
-#
-#params_phys-y (Instead: Pass atags pointer in r2)
-#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
deleted file mode 100644
index bf37e3c53..000000000
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ /dev/null
@@ -1,1365 +0,0 @@
-/*
- * armadillo 800 eva board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
-#include <linux/input.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/st1232_pdata.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/reboot.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/page.h>
-#include <media/mt9t112.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/soc_camera.h>
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "r8a7740.h"
-#include "sh-gpio.h"
-
-/*
- * CON1		Camera Module
- * CON2		Extension Bus
- * CON3		HDMI Output
- * CON4		Composite Video Output
- * CON5		H-UDI JTAG
- * CON6		ARM JTAG
- * CON7		SD1
- * CON8		SD2
- * CON9		RTC BackUp
- * CON10	Monaural Mic Input
- * CON11	Stereo Headphone Output
- * CON12	Audio Line Output(L)
- * CON13	Audio Line Output(R)
- * CON14	AWL13 Module
- * CON15	Extension
- * CON16	LCD1
- * CON17	LCD2
- * CON19	Power Input
- * CON20	USB1
- * CON21	USB2
- * CON22	Serial
- * CON23	LAN
- * CON24	USB3
- * LED1		Camera LED(Yellow)
- * LED2		Power LED (Green)
- * ED3-LED6	User LED(Yellow)
- * LED7		LAN link LED(Green)
- * LED8		LAN activity LED(Yellow)
- */
-
-/*
- * DipSwitch
- *
- *                    SW1
- *
- * -12345678-+---------------+----------------------------
- *  1        | boot          | hermit
- *  0        | boot          | OS auto boot
- * -12345678-+---------------+----------------------------
- *   00      | boot device   | eMMC
- *   10      | boot device   | SDHI0 (CON7)
- *   01      | boot device   | -
- *   11      | boot device   | Extension Buss (CS0)
- * -12345678-+---------------+----------------------------
- *     0     | Extension Bus | D8-D15 disable, eMMC enable
- *     1     | Extension Bus | D8-D15 enable,  eMMC disable
- * -12345678-+---------------+----------------------------
- *      0    | SDHI1         | COM8 disable, COM14 enable
- *      1    | SDHI1         | COM8 enable,  COM14 disable
- * -12345678-+---------------+----------------------------
- *       0   | USB0          | COM20 enable,  COM24 disable
- *       1   | USB0          | COM20 disable, COM24 enable
- * -12345678-+---------------+----------------------------
- *        00 | JTAG          | SH-X2
- *        10 | JTAG          | ARM
- *        01 | JTAG          | -
- *        11 | JTAG          | Boundary Scan
- *-----------+---------------+----------------------------
- */
-
-/*
- * FSI-WM8978
- *
- * this command is required when playback.
- *
- * # amixer set "Headphone" 50
- *
- * this command is required when capture.
- *
- * # amixer set "Input PGA" 15
- * # amixer set "Left Input Mixer MicP" on
- * # amixer set "Left Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicP" on
- */
-
-/*
- * USB function
- *
- * When you use USB Function,
- * set SW1.6 ON, and connect cable to CN24.
- *
- * USBF needs workaround on R8A7740 chip.
- * These are a little bit complex.
- * see
- *	usbhsf_power_ctrl()
- */
-#define IRQ7		irq_pin(7)
-#define USBCR1		IOMEM(0xe605810a)
-#define USBH		0xC6700000
-#define USBH_USBCTR	0x10834
-
-struct usbhsf_private {
-	struct clk *phy;
-	struct clk *usb24;
-	struct clk *pci;
-	struct clk *func;
-	struct clk *host;
-	void __iomem *usbh_base;
-	struct renesas_usbhs_platform_info info;
-};
-
-#define usbhsf_get_priv(pdev)				\
-	container_of(renesas_usbhs_get_info(pdev),	\
-		     struct usbhsf_private, info)
-
-static int usbhsf_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static int usbhsf_power_ctrl(struct platform_device *pdev,
-			      void __iomem *base, int enable)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-
-	/*
-	 * Work around for USB Function.
-	 * It needs USB host clock, and settings
-	 */
-	if (enable) {
-		/*
-		 * enable all the related usb clocks
-		 * for usb workaround
-		 */
-		clk_enable(priv->usb24);
-		clk_enable(priv->pci);
-		clk_enable(priv->host);
-		clk_enable(priv->func);
-		clk_enable(priv->phy);
-
-		/*
-		 * set USBCR1
-		 *
-		 * Port1 is driven by USB function,
-		 * Port2 is driven by USB HOST
-		 * One HOST (Port1 or Port2 is HOST)
-		 * USB PLL input clock = 24MHz
-		 */
-		__raw_writew(0xd750, USBCR1);
-		mdelay(1);
-
-		/*
-		 * start USB Host
-		 */
-		__raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR);
-		__raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR);
-		mdelay(10);
-
-		/*
-		 * USB PHY Power ON
-		 */
-		__raw_writew(0xd770, USBCR1);
-		__raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */
-
-	} else {
-		__raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR);
-		__raw_writew(0xd7c0, USBCR1); /* GPIO */
-
-		clk_disable(priv->phy);
-		clk_disable(priv->func);	/* usb work around */
-		clk_disable(priv->host);	/* usb work around */
-		clk_disable(priv->pci);		/* usb work around */
-		clk_disable(priv->usb24);	/* usb work around */
-	}
-
-	return 0;
-}
-
-static int usbhsf_get_vbus(struct platform_device *pdev)
-{
-	return gpio_get_value(209);
-}
-
-static irqreturn_t usbhsf_interrupt(int irq, void *data)
-{
-	struct platform_device *pdev = data;
-
-	renesas_usbhs_call_notify_hotplug(pdev);
-
-	return IRQ_HANDLED;
-}
-
-static int usbhsf_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-
-	if (!IS_ERR(priv->phy))
-		clk_put(priv->phy);
-	if (!IS_ERR(priv->usb24))
-		clk_put(priv->usb24);
-	if (!IS_ERR(priv->pci))
-		clk_put(priv->pci);
-	if (!IS_ERR(priv->host))
-		clk_put(priv->host);
-	if (!IS_ERR(priv->func))
-		clk_put(priv->func);
-	if (priv->usbh_base)
-		iounmap(priv->usbh_base);
-
-	priv->phy	= NULL;
-	priv->usb24	= NULL;
-	priv->pci	= NULL;
-	priv->host	= NULL;
-	priv->func	= NULL;
-	priv->usbh_base	= NULL;
-
-	free_irq(IRQ7, pdev);
-
-	return 0;
-}
-
-static int usbhsf_hardware_init(struct platform_device *pdev)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-	int ret;
-
-	priv->phy	= clk_get(&pdev->dev, "phy");
-	priv->usb24	= clk_get(&pdev->dev, "usb24");
-	priv->pci	= clk_get(&pdev->dev, "pci");
-	priv->func	= clk_get(&pdev->dev, "func");
-	priv->host	= clk_get(&pdev->dev, "host");
-	priv->usbh_base	= ioremap_nocache(USBH, 0x20000);
-
-	if (IS_ERR(priv->phy)		||
-	    IS_ERR(priv->usb24)		||
-	    IS_ERR(priv->pci)		||
-	    IS_ERR(priv->host)		||
-	    IS_ERR(priv->func)		||
-	    !priv->usbh_base) {
-		dev_err(&pdev->dev, "USB clock setting failed\n");
-		usbhsf_hardware_exit(pdev);
-		return -EIO;
-	}
-
-	ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE,
-			  dev_name(&pdev->dev), pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "request_irq err\n");
-		return ret;
-	}
-	irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH);
-
-	/* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
-	clk_set_rate(priv->usb24,
-		     clk_get_rate(clk_get_parent(priv->usb24)));
-
-	return 0;
-}
-
-static struct usbhsf_private usbhsf_private = {
-	.info = {
-		.platform_callback = {
-			.get_id		= usbhsf_get_id,
-			.get_vbus	= usbhsf_get_vbus,
-			.hardware_init	= usbhsf_hardware_init,
-			.hardware_exit	= usbhsf_hardware_exit,
-			.power_ctrl	= usbhsf_power_ctrl,
-		},
-		.driver_param = {
-			.buswait_bwait		= 5,
-			.detection_delay	= 5,
-			.d0_rx_id	= SHDMA_SLAVE_USBHS_RX,
-			.d1_tx_id	= SHDMA_SLAVE_USBHS_TX,
-		},
-	}
-};
-
-static struct resource usbhsf_resources[] = {
-	{
-		.name	= "USBHS",
-		.start	= 0xe6890000,
-		.end	= 0xe6890104 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= gic_spi(51),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhsf_device = {
-	.name	= "renesas_usbhs",
-	.dev = {
-		.platform_data = &usbhsf_private.info,
-	},
-	.id = -1,
-	.num_resources	= ARRAY_SIZE(usbhsf_resources),
-	.resource	= usbhsf_resources,
-};
-
-/* Ether */
-static struct sh_eth_plat_data sh_eth_platdata = {
-	.phy			= 0x00, /* LAN8710A */
-	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource sh_eth_resources[] = {
-	{
-		.start	= 0xe9a00000,
-		.end	= 0xe9a00800 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 0xe9a01800,
-		.end	= 0xe9a02000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= gic_spi(110),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_eth_device = {
-	.name = "r8a7740-gether",
-	.id = -1,
-	.dev = {
-		.platform_data = &sh_eth_platdata,
-		.dma_mask = &sh_eth_device.dev.coherent_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource = sh_eth_resources,
-	.num_resources = ARRAY_SIZE(sh_eth_resources),
-};
-
-/* PWM */
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start = 0xe6600000,
-		.end = 0xe66000ff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device pwm_device = {
-	.name = "renesas-tpu-pwm",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(pwm_resources),
-	.resource = pwm_resources,
-};
-
-static struct pwm_lookup pwm_lookup[] = {
-	PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL,
-		   33333, PWM_POLARITY_INVERSED),
-};
-
-/* LCDC and backlight */
-static struct platform_pwm_backlight_data pwm_backlight_data = {
-	.lth_brightness = 50,
-	.max_brightness = 255,
-	.dft_brightness = 255,
-	.pwm_period_ns = 33333, /* 30kHz */
-	.enable_gpio = 61,
-};
-
-static struct platform_device pwm_backlight_device = {
-	.name = "pwm-backlight",
-	.dev = {
-		.platform_data = &pwm_backlight_data,
-	},
-};
-
-static struct fb_videomode lcdc0_mode = {
-	.name		= "AMPIER/AM-800480",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source	= LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.lcd_modes	= &lcdc0_mode,
-		.num_modes	= 1,
-		.panel_cfg = {
-			.width	= 111,
-			.height = 68,
-		},
-	},
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCD0",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(177),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.resource	= lcdc0_resources,
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/*
- * LCDC1/HDMI
- */
-static struct sh_mobile_hdmi_info hdmi_info = {
-	.flags		= HDMI_OUTPUT_PUSH_PULL |
-			  HDMI_OUTPUT_POLARITY_HI |
-			  HDMI_32BIT_REG |
-			  HDMI_HAS_HTOP1 |
-			  HDMI_SND_SRC_SPDIF,
-};
-
-static struct resource hdmi_resources[] = {
-	[0] = {
-		.name	= "HDMI",
-		.start	= 0xe6be0000,
-		.end	= 0xe6be03ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(131),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "HDMI emma3pf",
-		.start	= 0xe6be4000,
-		.end	= 0xe6be43ff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device hdmi_device = {
-	.name		= "sh-mobile-hdmi",
-	.num_resources	= ARRAY_SIZE(hdmi_resources),
-	.resource	= hdmi_resources,
-	.id             = -1,
-	.dev	= {
-		.platform_data	= &hdmi_info,
-	},
-};
-
-static const struct fb_videomode lcdc1_mode = {
-	.name		= "HDMI 720p",
-	.xres		= 1280,
-	.yres		= 720,
-	.pixclock	= 13468,
-	.left_margin	= 220,
-	.right_margin	= 110,
-	.hsync_len	= 40,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.refresh	= 60,
-	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-};
-
-static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
-	.clock_source	= LCDC_CLK_PERIPHERAL, /* HDMI clock */
-	.ch[0] = {
-		.chan			= LCDC_CHAN_MAINLCD,
-		.fourcc			= V4L2_PIX_FMT_RGB565,
-		.interface_type		= RGB24,
-		.clock_divider		= 1,
-		.flags			= LCDC_FLAGS_DWPOL,
-		.lcd_modes		= &lcdc1_mode,
-		.num_modes		= 1,
-		.tx_dev			= &hdmi_device,
-		.panel_cfg = {
-			.width	= 1280,
-			.height = 720,
-		},
-	},
-};
-
-static struct resource hdmi_lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC1",
-		.start	= 0xfe944000,
-		.end	= 0xfe948000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(178),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(hdmi_lcdc_resources),
-	.resource	= hdmi_lcdc_resources,
-	.id		= 1,
-	.dev	= {
-		.platform_data	= &hdmi_lcdc_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* LEDS */
-static struct gpio_led gpio_leds[] = {
-	{
-		.name		= "LED3",
-		.gpio		= 102,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "LED4",
-		.gpio		= 111,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "LED5",
-		.gpio		= 110,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "LED6",
-		.gpio		= 177,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-};
-
-static struct gpio_led_platform_data leds_gpio_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio_device = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &leds_gpio_info,
-	},
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d, ...) \
-	{ .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_POWER,	99,	"SW3", .wakeup = 1),
-	GPIO_KEY(KEY_BACK,	100,	"SW4"),
-	GPIO_KEY(KEY_MENU,	97,	"SW5"),
-	GPIO_KEY(KEY_HOME,	98,	"SW6"),
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1, MMCIF */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
-};
-
-/* Fixed 3.3V regulator used by LCD backlight */
-static struct regulator_consumer_supply fixed5v0_power_consumers[] = {
-	REGULATOR_SUPPLY("power", "pwm-backlight.0"),
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply vcc_sdhi0_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vcc_sdhi0_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
-	.consumer_supplies      = vcc_sdhi0_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi0_info = {
-	.supply_name = "SDHI0 Vcc",
-	.microvolts = 3300000,
-	.gpio = 75,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi0_init_data,
-};
-
-static struct platform_device vcc_sdhi0 = {
-	.name = "reg-fixed-voltage",
-	.id   = 1,
-	.dev  = {
-		.platform_data = &vcc_sdhi0_info,
-	},
-};
-
-/* 1.8 / 3.3V SDHI0 VccQ regulator */
-static struct regulator_consumer_supply vccq_sdhi0_consumers[] = {
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vccq_sdhi0_init_data = {
-	.constraints = {
-		.input_uV	= 3300000,
-		.min_uV		= 1800000,
-		.max_uV         = 3300000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vccq_sdhi0_consumers),
-	.consumer_supplies      = vccq_sdhi0_consumers,
-};
-
-static struct gpio vccq_sdhi0_gpios[] = {
-	{17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
-};
-
-static struct gpio_regulator_state vccq_sdhi0_states[] = {
-	{ .value = 3300000, .gpios = (0 << 0) },
-	{ .value = 1800000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config vccq_sdhi0_info = {
-	.supply_name = "vqmmc",
-
-	.enable_gpio = 74,
-	.enable_high = 1,
-	.enabled_at_boot = 0,
-
-	.gpios = vccq_sdhi0_gpios,
-	.nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios),
-
-	.states = vccq_sdhi0_states,
-	.nr_states = ARRAY_SIZE(vccq_sdhi0_states),
-
-	.type = REGULATOR_VOLTAGE,
-	.init_data = &vccq_sdhi0_init_data,
-};
-
-static struct platform_device vccq_sdhi0 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &vccq_sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1 */
-static struct regulator_consumer_supply vcc_sdhi1_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data vcc_sdhi1_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi1_consumers),
-	.consumer_supplies      = vcc_sdhi1_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi1_info = {
-	.supply_name = "SDHI1 Vcc",
-	.microvolts = 3300000,
-	.gpio = 16,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi1_init_data,
-};
-
-static struct platform_device vcc_sdhi1 = {
-	.name = "reg-fixed-voltage",
-	.id   = 2,
-	.dev  = {
-		.platform_data = &vcc_sdhi1_info,
-	},
-};
-
-/* SDHI0 */
-static struct tmio_mmc_data sdhi0_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	.cd_gpio	= 167,
-};
-
-static struct resource sdhi0_resources[] = {
-	{
-		.name	= "SDHI0",
-		.start	= 0xe6850000,
-		.end	= 0xe6850100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here
-	 */
-	{
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(118),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(119),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sdhi0_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-};
-
-/* SDHI1 */
-static struct tmio_mmc_data sdhi1_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	/* Port72 cannot generate IRQs, will be used in polling mode. */
-	.cd_gpio	= 72,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start	= 0xe6860000,
-		.end	= 0xe6860100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(121),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(122),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= gic_spi(123),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &sdhi1_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-};
-
-static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = {
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_ctrl", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_cd", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_wp", "sdhi1"),
-};
-
-/* MMCIF */
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.sup_pclk	= 0,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NONREMOVABLE,
-	.ccs_unsupported = true,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd0100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* MMC ERR */
-		.start	= gic_spi(56),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* MMC NOR */
-		.start	= gic_spi(57),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_mmcif_device = {
-	.name		= "sh_mmcif",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &sh_mmcif_plat,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* Camera */
-static int mt9t111_power(struct device *dev, int mode)
-{
-	struct clk *mclk = clk_get(NULL, "video1");
-
-	if (IS_ERR(mclk)) {
-		dev_err(dev, "can't get video1 clock\n");
-		return -EINVAL;
-	}
-
-	if (mode) {
-		/* video1 (= CON1 camera) expect 24MHz */
-		clk_set_rate(mclk, clk_round_rate(mclk, 24000000));
-		clk_enable(mclk);
-		gpio_set_value(158, 1);
-	} else {
-		gpio_set_value(158, 0);
-		clk_disable(mclk);
-	}
-
-	clk_put(mclk);
-
-	return 0;
-}
-
-static struct i2c_board_info i2c_camera_mt9t111 = {
-	I2C_BOARD_INFO("mt9t112", 0x3d),
-};
-
-static struct mt9t112_camera_info mt9t111_info = {
-	.divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 },
-};
-
-static struct soc_camera_link mt9t111_link = {
-	.i2c_adapter_id	= 0,
-	.bus_id		= 0,
-	.board_info	= &i2c_camera_mt9t111,
-	.power		= mt9t111_power,
-	.priv		= &mt9t111_info,
-};
-
-static struct platform_device camera_device = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &mt9t111_link,
-	},
-};
-
-/* CEU0 */
-static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
-	.flags = SH_CEU_FLAG_LOWER_8BIT,
-};
-
-static struct resource ceu0_resources[] = {
-	[0] = {
-		.name	= "CEU",
-		.start	= 0xfe910000,
-		.end	= 0xfe91009f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(160),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* place holder for contiguous memory */
-	},
-};
-
-static struct platform_device ceu0_device = {
-	.name		= "sh_mobile_ceu",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ceu0_resources),
-	.resource	= ceu0_resources,
-	.dev	= {
-		.platform_data		= &sh_mobile_ceu0_info,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-/* FSI */
-static struct sh_fsi_platform_info fsi_info = {
-	/* FSI-WM8978 */
-	.port_a = {
-		.tx_id = SHDMA_SLAVE_FSIA_TX,
-	},
-	/* FSI-HDMI */
-	.port_b = {
-		.flags		= SH_FSI_FMT_SPDIF |
-				  SH_FSI_ENABLE_STREAM_MODE |
-				  SH_FSI_CLK_CPG,
-		.tx_id		= SHDMA_SLAVE_FSIB_TX,
-	}
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xfe1f0000,
-		.end	= 0xfe1f0400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(9),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-/* FSI-WM8978 */
-static struct asoc_simple_card_info fsi_wm8978_info = {
-	.name		= "wm8978",
-	.card		= "FSI2A-WM8978",
-	.codec		= "wm8978.0-001a",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-	},
-	.codec_dai = {
-		.name	= "wm8978-hifi",
-		.sysclk	= 12288000,
-	},
-};
-
-static struct platform_device fsi_wm8978_device = {
-	.name	= "asoc-simple-card",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &fsi_wm8978_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_wm8978_device.dev.coherent_dma_mask,
-	},
-};
-
-/* FSI-HDMI */
-static struct asoc_simple_card_info fsi2_hdmi_info = {
-	.name		= "HDMI",
-	.card		= "FSI2B-HDMI",
-	.codec		= "sh-mobile-hdmi",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_CBS_CFS,
-	.cpu_dai = {
-		.name	= "fsib-dai",
-	},
-	.codec_dai = {
-		.name = "sh_mobile_hdmi-hifi",
-	},
-};
-
-static struct platform_device fsi_hdmi_device = {
-	.name	= "asoc-simple-card",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &fsi2_hdmi_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
-	},
-};
-
-/* RTC: RTC connects i2c-gpio. */
-static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin	= 208,
-	.scl_pin	= 91,
-	.udelay		= 5, /* 100 kHz */
-};
-
-static struct platform_device i2c_gpio_device = {
-	.name = "i2c-gpio",
-	.id = 2,
-	.dev = {
-		.platform_data = &i2c_gpio_data,
-	},
-};
-
-/* I2C */
-static struct st1232_pdata st1232_i2c0_pdata = {
-	.reset_gpio = 166,
-};
-
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = irq_pin(10),
-		.platform_data = &st1232_i2c0_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8978", 0x1a),
-	},
-};
-
-static struct i2c_board_info i2c2_devices[] = {
-	{
-		I2C_BOARD_INFO("s35390a", 0x30),
-		.type = "s35390a",
-	},
-};
-
-/*
- * board devices
- */
-static struct platform_device *eva_devices[] __initdata = {
-	&lcdc0_device,
-	&pwm_device,
-	&pwm_backlight_device,
-	&leds_gpio_device,
-	&gpio_keys_device,
-	&sh_eth_device,
-	&vcc_sdhi0,
-	&vccq_sdhi0,
-	&sdhi0_device,
-	&sh_mmcif_device,
-	&hdmi_device,
-	&hdmi_lcdc_device,
-	&camera_device,
-	&ceu0_device,
-	&fsi_device,
-	&fsi_wm8978_device,
-	&fsi_hdmi_device,
-	&i2c_gpio_device,
-};
-
-static const struct pinctrl_map eva_pinctrl_map[] = {
-	/* CEU0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_data_0_7", "ceu0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_clk_0", "ceu0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_sync", "ceu0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_field", "ceu0"),
-	/* FSIA */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_mclk_out", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_data_in_1", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_data_out_0", "fsia"),
-	/* FSIB */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
-				  "fsib_mclk_in", "fsib"),
-	/* GETHER */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
-				  "gether_mii", "gether"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
-				  "gether_int", "gether"),
-	/* HDMI */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",
-				  "hdmi", "hdmi"),
-	/* LCD0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_data24_0", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_lclk_1", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_sync", "lcd0"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
-				  "mmc0_data8_1", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
-				  "mmc0_ctrl_1", "mmc0"),
-	/* SCIFA1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
-				  "scifa1_data", "scifa1"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
-				  "sdhi0_wp", "sdhi0"),
-	/* ST1232 */
-	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740",
-				  "intc_irq10", "intc"),
-	/* TPU0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740",
-				  "tpu0_to2_1", "tpu0"),
-	/* USBHS */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740",
-				  "intc_irq7_1", "intc"),
-};
-
-static void __init eva_clock_init(void)
-{
-	struct clk *system	= clk_get(NULL, "system_clk");
-	struct clk *xtal1	= clk_get(NULL, "extal1");
-	struct clk *usb24s	= clk_get(NULL, "usb24s");
-	struct clk *fsibck	= clk_get(NULL, "fsibck");
-
-	if (IS_ERR(system)	||
-	    IS_ERR(xtal1)	||
-	    IS_ERR(usb24s)	||
-	    IS_ERR(fsibck)) {
-		pr_err("armadillo800eva board clock init failed\n");
-		goto clock_error;
-	}
-
-	/* armadillo 800 eva extal1 is 24MHz */
-	clk_set_rate(xtal1, 24000000);
-
-	/* usb24s use extal1 (= system) clock (= 24MHz) */
-	clk_set_parent(usb24s, system);
-
-	/* FSIBCK is 12.288MHz, and it is parent of FSI-B */
-	clk_set_rate(fsibck, 12288000);
-
-clock_error:
-	if (!IS_ERR(system))
-		clk_put(system);
-	if (!IS_ERR(xtal1))
-		clk_put(xtal1);
-	if (!IS_ERR(usb24s))
-		clk_put(usb24s);
-	if (!IS_ERR(fsibck))
-		clk_put(fsibck);
-}
-
-/*
- * board init
- */
-#define GPIO_PORT7CR	IOMEM(0xe6050007)
-#define GPIO_PORT8CR	IOMEM(0xe6050008)
-static void __init eva_init(void)
-{
-	static struct pm_domain_device domain_devices[] __initdata = {
-		{ "A4LC", &lcdc0_device },
-		{ "A4LC", &hdmi_lcdc_device },
-		{ "A4MP", &hdmi_device },
-		{ "A4MP", &fsi_device },
-		{ "A4R",  &ceu0_device },
-		{ "A4S",  &sh_eth_device },
-		{ "A3SP", &pwm_device },
-		{ "A3SP", &sdhi0_device },
-		{ "A3SP", &sh_mmcif_device },
-	};
-	struct platform_device *usb = NULL, *sdhi1 = NULL;
-
-	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers,
-				     ARRAY_SIZE(fixed5v0_power_consumers), 5000000);
-
-	pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-
-	r8a7740_pinmux_init();
-	r8a7740_meram_workaround();
-
-	/* GETHER */
-	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
-
-	/* USB */
-	gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */
-
-	if (gpio_get_value(159)) {
-		/* USB Host */
-	} else {
-		/* USB Func */
-		/*
-		 * The USBHS interrupt handlers needs to read the IRQ pin value
-		 * (HI/LOW) to diffentiate USB connection and disconnection
-		 * events (usbhsf_get_vbus()). We thus need to select both the
-		 * intc_irq7_1 pin group and GPIO 209 here.
-		 */
-		gpio_request_one(209, GPIOF_IN, NULL);
-
-		platform_device_register(&usbhsf_device);
-		usb = &usbhsf_device;
-	}
-
-	/* CON1/CON15 Camera */
-	gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL);  /* STANDBY */
-	gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
-	/* see mt9t111_power() */
-	gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL);  /* CAM_PON */
-
-	/* FSI-WM8978 */
-	gpio_request(7, NULL);
-	gpio_request(8, NULL);
-	gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */
-	gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */
-
-	/*
-	 * CAUTION
-	 *
-	 * DBGMD/LCDC0/FSIA MUX
-	 * DBGMD_SELECT_B should be set after setting PFC Function.
-	 */
-	gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL);
-
-	/*
-	 * We can switch CON8/CON14 by SW1.5,
-	 * but it needs after DBGMD_SELECT_B
-	 */
-	gpio_request_one(6, GPIOF_IN, NULL);
-	if (gpio_get_value(6)) {
-		/* CON14 enable */
-	} else {
-		/* CON8 (SDHI1) enable */
-		pinctrl_register_mappings(eva_sdhi1_pinctrl_map,
-					  ARRAY_SIZE(eva_sdhi1_pinctrl_map));
-
-		platform_device_register(&vcc_sdhi1);
-		platform_device_register(&sdhi1_device);
-		sdhi1 = &sdhi1_device;
-	}
-
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
-
-	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices));
-
-	r8a7740_add_standard_devices();
-
-	platform_add_devices(eva_devices,
-			     ARRAY_SIZE(eva_devices));
-
-	rmobile_add_devices_to_domains(domain_devices,
-				       ARRAY_SIZE(domain_devices));
-	if (usb)
-		rmobile_add_device_to_domain("A3SP", usb);
-	if (sdhi1)
-		rmobile_add_device_to_domain("A3SP", sdhi1);
-
-	r8a7740_pm_init();
-}
-
-static void __init eva_earlytimer_init(void)
-{
-	r8a7740_clock_init(MD_CK0 | MD_CK2);
-	shmobile_earlytimer_init();
-
-	/* the rate of extal1 clock must be set before late_time_init */
-	eva_clock_init();
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
-static const char *eva_boards_compat_dt[] __initdata = {
-	"renesas,armadillo800eva",
-	NULL,
-};
-
-DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
-	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_add_early_devices,
-	.init_irq	= r8a7740_init_irq_of,
-	.init_machine	= eva_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= eva_earlytimer_init,
-	.dt_compat	= eva_boards_compat_dt,
-	.restart	= eva_restart,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
deleted file mode 100644
index 9a74efda3..000000000
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "r8a7778.h"
-
-/*
- *	see board-bock.c for checking detail of dip-switch
- */
-
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
-#define COMCTLR	0x101c
-
-#define PFC	0xfffc0000
-#define PUPR4	0x110
-static void __init bockw_init(void)
-{
-	void __iomem *fpga;
-	void __iomem *pfc;
-
-#ifndef CONFIG_COMMON_CLK
-	r8a7778_clock_init();
-#endif
-	r8a7778_init_irq_extpin_dt(1);
-	r8a7778_add_dt_devices();
-
-	fpga = ioremap_nocache(FPGA, SZ_1M);
-	if (fpga) {
-		/*
-		 * CAUTION
-		 *
-		 * IRQ0/1 is cascaded interrupt from FPGA.
-		 * it should be cared in the future
-		 * Now, it is assuming IRQ0 was used only from SMSC.
-		 */
-		u16 val = ioread16(fpga + IRQ0MR);
-		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, fpga + IRQ0MR);
-
-		iounmap(fpga);
-	}
-
-	pfc = ioremap_nocache(PFC, 0x200);
-	if (pfc) {
-		/*
-		 * FIXME
-		 *
-		 * SDHI CD/WP pin needs pull-up
-		 */
-		iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4);
-		iounmap(pfc);
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *bockw_boards_compat_dt[] __initdata = {
-	"renesas,bockw-reference",
-	NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= bockw_init,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= bockw_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
deleted file mode 100644
index 25558d1f4..000000000
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013-2014  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013-2014  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/camera-rcar.h>
-#include <linux/platform_data/usb-rcar-phy.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/usb/renesas_usbhs.h>
-
-#include <media/soc_camera.h>
-#include <asm/mach/arch.h>
-#include <sound/rcar_snd.h>
-#include <sound/simple_card.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a7778.h"
-
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
-#define COMCTLR	0x101c
-static void __iomem *fpga;
-
-/*
- *	CN9(Upper side) SCIF/RCAN selection
- *
- *		1,4	3,6
- * SW40		SCIF	RCAN
- * SW41		SCIF	RCAN
- */
-
-/*
- * MMC (CN26) pin
- *
- * SW6	(D2)	3 pin
- * SW7	(D5)	ON
- * SW8	(D3)	3 pin
- * SW10	(D4)	1 pin
- * SW12	(CLK)	1 pin
- * SW13	(D6)	3 pin
- * SW14	(CMD)	ON
- * SW15	(D6)	1 pin
- * SW16	(D0)	ON
- * SW17	(D1)	ON
- * SW18	(D7)	3 pin
- * SW19	(MMC)	1 pin
- */
-
-/*
- *	SSI settings
- *
- * SW45: 1-4 side	(SSI5 out, ROUT/LOUT CN19 Mid)
- * SW46: 1101		(SSI6 Recorde)
- * SW47: 1110		(SSI5 Playback)
- * SW48: 11		(Recorde power)
- * SW49: 1		(SSI slave mode)
- * SW50: 1111		(SSI7, SSI8)
- * SW51: 1111		(SSI3, SSI4)
- * SW54: 1pin		(ak4554 FPGA control)
- * SW55: 1		(CLKB is 24.5760MHz)
- * SW60: 1pin		(ak4554 FPGA control)
- * SW61: 3pin		(use X11 clock)
- * SW78: 3-6		(ak4642 connects I2C0)
- *
- * You can use sound as
- *
- * hw0: CN19: SSI56-AK4643
- * hw1: CN21: SSI3-AK4554(playback)
- * hw2: CN21: SSI4-AK4554(capture)
- * hw3: CN20: SSI7-AK4554(playback)
- * hw4: CN20: SSI8-AK4554(capture)
- *
- * this command is required when playback on hw0.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/*
- * USB
- *
- * USB1 (CN29) can be Host/Function
- *
- *		Host	Func
- * SW98		1	2
- * SW99		1	3
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
-};
-
-static struct smsc911x_platform_config smsc911x_data __initdata = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] __initdata = {
-	DEFINE_RES_MEM(0x18300000, 0x1000),
-	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
-};
-
-#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
-/*
- * When USB1 is Func
- */
-static int usbhsf_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-#define SUSPMODE	0x102
-static int usbhsf_power_ctrl(struct platform_device *pdev,
-			     void __iomem *base, int enable)
-{
-	enable = !!enable;
-
-	r8a7778_usb_phy_power(enable);
-
-	iowrite16(enable << 14, base + SUSPMODE);
-
-	return 0;
-}
-
-static struct resource usbhsf_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe60000, 0x110),
-	DEFINE_RES_IRQ(gic_iid(0x4f)),
-};
-
-static struct renesas_usbhs_platform_info usbhs_info __initdata = {
-	.platform_callback = {
-		.get_id		= usbhsf_get_id,
-		.power_ctrl	= usbhsf_power_ctrl,
-	},
-	.driver_param = {
-		.buswait_bwait	= 4,
-		.d0_tx_id	= HPBDMA_SLAVE_USBFUNC_TX,
-		.d1_rx_id	= HPBDMA_SLAVE_USBFUNC_RX,
-	},
-};
-
-#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
-#define USB1_DEVICE	"renesas_usbhs"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()			\
-	platform_device_register_resndata(			\
-		NULL, "renesas_usbhs", -1,			\
-		usbhsf_resources,				\
-		ARRAY_SIZE(usbhsf_resources),			\
-		&usbhs_info, sizeof(struct renesas_usbhs_platform_info))
-
-#else
-/*
- * When USB1 is Host
- */
-#define USB_PHY_SETTING { }
-#define USB1_DEVICE	"ehci-platform"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
-
-#endif
-
-/* USB */
-static struct resource usb_phy_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70800, 0x100),
-	DEFINE_RES_MEM(0xffe76000, 0x100),
-};
-
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
-	USB_PHY_SETTING;
-
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info __initdata = {
-	.chan_priv_tx	= (void *)HPBDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)HPBDMA_SLAVE_SDHI0_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED,
-	.ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] __initdata = {
-	DEFINE_RES_MEM(0xFFE4C000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x77)),
-};
-
-/* Ether */
-static struct resource ether_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfde00000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-static struct sh_eth_plat_data ether_platform_data __initdata = {
-	.phy		= 0x01,
-	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
-	.phy_interface	= PHY_INTERFACE_MODE_RMII,
-	/*
-	 * Although the LINK signal is available on the board, it's connected to
-	 * the link/activity LED output of the PHY, thus the link disappears and
-	 * reappears after each packet.  We'd be better off ignoring such signal
-	 * and getting the link state from the PHY indirectly.
-	 */
-	.no_ether_link	= 1,
-};
-
-static struct platform_device_info ether_info __initdata = {
-	.name		= "r8a777x-ether",
-	.id		= -1,
-	.res		= ether_resources,
-	.num_res	= ARRAY_SIZE(ether_resources),
-	.data		= &ether_platform_data,
-	.size_data	= sizeof(ether_platform_data),
-	.dma_mask	= DMA_BIT_MASK(32),
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("rx8581", 0x51),
-	}, {
-		I2C_BOARD_INFO("ak4643", 0x12),
-	}
-};
-
-/* HSPI*/
-static struct mtd_partition m25p80_spi_flash_partitions[] = {
-	{
-		.name	= "data(spi)",
-		.size	= 0x0100000,
-		.offset	= 0,
-	},
-};
-
-static struct flash_platform_data spi_flash_data = {
-	.name		= "m25p80",
-	.type		= "s25fl008k",
-	.parts		= m25p80_spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(m25p80_spi_flash_partitions),
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "m25p80",
-		.max_speed_hz	= 104000000,
-		.chip_select	= 0,
-		.bus_num	= 0,
-		.mode		= SPI_MODE_0,
-		.platform_data	= &spi_flash_data,
-	},
-};
-
-/* MMC */
-static struct resource mmc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe4e000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x5d)),
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
-	.sup_pclk	= 0,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NEEDS_POLL,
-};
-
-/* In the default configuration both decoders reside on I2C bus 0 */
-#define BOCKW_CAMERA(idx)						\
-static struct i2c_board_info camera##idx##_info = {			\
-	I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)),			\
-};									\
-									\
-static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
-	.bus_id		= idx,						\
-	.i2c_adapter_id	= 0,						\
-	.board_info	= &camera##idx##_info,				\
-}
-
-BOCKW_CAMERA(0);
-BOCKW_CAMERA(1);
-
-/* VIN */
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
-	.flags	= RCAR_VIN_BT656,
-};
-
-#define R8A7778_VIN(idx)						\
-static struct resource vin##idx##_resources[] __initdata = {		\
-	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
-	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
-};									\
-									\
-static struct platform_device_info vin##idx##_info __initdata = {	\
-	.name		= "r8a7778-vin",				\
-	.id		= idx,						\
-	.res		= vin##idx##_resources,				\
-	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
-	.dma_mask	= DMA_BIT_MASK(32),				\
-	.data		= &vin_platform_data,				\
-	.size_data	= sizeof(vin_platform_data),			\
-}
-R8A7778_VIN(0);
-R8A7778_VIN(1);
-
-/* Sound */
-static struct resource rsnd_resources[] __initdata = {
-	[RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
-	[RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
-	[RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
-};
-
-static struct rsnd_ssi_platform_info rsnd_ssi[] = {
-	RSND_SSI_UNUSED, /* SSI 0 */
-	RSND_SSI_UNUSED, /* SSI 1 */
-	RSND_SSI_UNUSED, /* SSI 2 */
-	RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
-};
-
-static struct rsnd_src_platform_info rsnd_src[9] = {
-	RSND_SRC_UNUSED, /* SRU 0 */
-	RSND_SRC_UNUSED, /* SRU 1 */
-	RSND_SRC_UNUSED, /* SRU 2 */
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-};
-
-static struct rsnd_dai_platform_info rsnd_dai[] = {
-	{
-		.playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
-		.capture  = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
-	}, {
-		.playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
-	}, {
-		.capture  = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
-	}, {
-		.playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
-	}, {
-		.capture  = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
-	},
-};
-
-enum {
-	AK4554_34 = 0,
-	AK4643_56,
-	AK4554_78,
-	SOUND_MAX,
-};
-
-static int rsnd_codec_power(int id, int enable)
-{
-	static int sound_user[SOUND_MAX] = {0, 0, 0};
-	int *usr = NULL;
-	u32 bit;
-
-	switch (id) {
-	case 3:
-	case 4:
-		usr = sound_user + AK4554_34;
-		bit = (1 << 10);
-		break;
-	case 5:
-	case 6:
-		usr = sound_user + AK4643_56;
-		bit = (1 << 6);
-		break;
-	case 7:
-	case 8:
-		usr = sound_user + AK4554_78;
-		bit = (1 << 7);
-		break;
-	}
-
-	if (!usr)
-		return -EIO;
-
-	if (enable) {
-		if (*usr == 0) {
-			u32 val = ioread16(fpga + COMCTLR);
-			val &= ~bit;
-			iowrite16(val, fpga + COMCTLR);
-		}
-
-		(*usr)++;
-	} else {
-		if (*usr == 0)
-			return 0;
-
-		(*usr)--;
-
-		if (*usr == 0) {
-			u32 val = ioread16(fpga + COMCTLR);
-			val |= bit;
-			iowrite16(val, fpga + COMCTLR);
-		}
-	}
-
-	return 0;
-}
-
-static int rsnd_start(int id)
-{
-	return rsnd_codec_power(id, 1);
-}
-
-static int rsnd_stop(int id)
-{
-	return rsnd_codec_power(id, 0);
-}
-
-static struct rcar_snd_info rsnd_info = {
-	.flags		= RSND_GEN1,
-	.ssi_info	= rsnd_ssi,
-	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
-	.src_info	= rsnd_src,
-	.src_info_nr	= ARRAY_SIZE(rsnd_src),
-	.dai_info	= rsnd_dai,
-	.dai_info_nr	= ARRAY_SIZE(rsnd_dai),
-	.start		= rsnd_start,
-	.stop		= rsnd_stop,
-};
-
-static struct asoc_simple_card_info rsnd_card_info[] = {
-	/* SSI5, SSI6 */
-	{
-		.name		= "AK4643",
-		.card		= "SSI56-AK4643",
-		.codec		= "ak4642-codec.0-0012",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
-		.cpu_dai = {
-			.name	= "rsnd-dai.0",
-		},
-		.codec_dai = {
-			.name	= "ak4642-hifi",
-			.sysclk	= 11289600,
-		},
-	},
-	/* SSI3 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI3-AK4554(playback)",
-		.codec		= "ak4554-adc-dac.0",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.1",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI4 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI4-AK4554(capture)",
-		.codec		= "ak4554-adc-dac.0",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.2",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI7 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI7-AK4554(playback)",
-		.codec		= "ak4554-adc-dac.1",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.3",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI8 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI8-AK4554(capture)",
-		.codec		= "ak4554-adc-dac.1",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.4",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	}
-};
-
-static const struct pinctrl_map bockw_pinctrl_map[] = {
-	/* AUDIO */
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "audio_clk_a", "audio_clk"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "audio_clk_b", "audio_clk"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi34_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi3_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi4_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi5_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi5_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi6_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi6_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi78_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi7_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi8_data", "ssi"),
-	/* Ether */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
-				  "ether_rmii", "ether"),
-	/* HSPI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
-				  "hspi0_a", "hspi0"),
-	/* MMC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
-				  "mmc_data8", "mmc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
-				  "mmc_ctrl", "mmc"),
-	/* SCIF0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
-				  "scif0_data_a", "scif0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
-				  "scif0_ctrl", "scif0"),
-	/* USB */
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
-				  "usb0", "usb0"),
-	PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
-				  "usb1", "usb1"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_wp", "sdhi0"),
-	/* VIN0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
-				  "vin0_clk", "vin0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
-				  "vin0_data8", "vin0"),
-	/* VIN1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
-				  "vin1_clk", "vin1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
-				  "vin1_data8", "vin1"),
-};
-
-#define PFC	0xfffc0000
-#define PUPR4	0x110
-static void __init bockw_init(void)
-{
-	void __iomem *base;
-	struct clk *clk;
-	struct platform_device *pdev;
-	int i;
-
-	r8a7778_clock_init();
-	r8a7778_init_irq_extpin(1);
-	r8a7778_add_standard_devices();
-
-	platform_device_register_full(&ether_info);
-
-	platform_device_register_full(&vin0_info);
-	/* VIN1 has a pin conflict with Ether */
-	if (!IS_ENABLED(CONFIG_SH_ETH))
-		platform_device_register_full(&vin1_info);
-	platform_device_register_data(NULL, "soc-camera-pdrv", 0,
-				      &iclink0_ml86v7667,
-				      sizeof(iclink0_ml86v7667));
-	platform_device_register_data(NULL, "soc-camera-pdrv", 1,
-				      &iclink1_ml86v7667,
-				      sizeof(iclink1_ml86v7667));
-
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-	spi_register_board_info(spi_board_info,
-				ARRAY_SIZE(spi_board_info));
-	pinctrl_register_mappings(bockw_pinctrl_map,
-				  ARRAY_SIZE(bockw_pinctrl_map));
-	r8a7778_pinmux_init();
-
-	platform_device_register_resndata(
-		NULL, "sh_mmcif", -1,
-		mmc_resources, ARRAY_SIZE(mmc_resources),
-		&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
-
-	platform_device_register_resndata(
-		NULL, "rcar_usb_phy", -1,
-		usb_phy_resources,
-		ARRAY_SIZE(usb_phy_resources),
-		&usb_phy_platform_data,
-		sizeof(struct rcar_phy_platform_data));
-
-	regulator_register_fixed(0, dummy_supplies,
-				 ARRAY_SIZE(dummy_supplies));
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
-	/* for SMSC */
-	fpga = ioremap_nocache(FPGA, SZ_1M);
-	if (fpga) {
-		/*
-		 * CAUTION
-		 *
-		 * IRQ0/1 is cascaded interrupt from FPGA.
-		 * it should be cared in the future
-		 * Now, it is assuming IRQ0 was used only from SMSC.
-		 */
-		u16 val = ioread16(fpga + IRQ0MR);
-		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, fpga + IRQ0MR);
-
-		platform_device_register_resndata(
-			NULL, "smsc911x", -1,
-			smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
-			&smsc911x_data, sizeof(smsc911x_data));
-	}
-
-	/* for SDHI */
-	base = ioremap_nocache(PFC, 0x200);
-	if (base) {
-		/*
-		 * FIXME
-		 *
-		 * SDHI CD/WP pin needs pull-up
-		 */
-		iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
-		iounmap(base);
-
-		platform_device_register_resndata(
-			NULL, "sh_mobile_sdhi", 0,
-			sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
-			&sdhi0_info, sizeof(struct tmio_mmc_data));
-	}
-
-	/* for Audio */
-	rsnd_codec_power(5, 1); /* enable ak4642 */
-
-	platform_device_register_simple(
-		"ak4554-adc-dac", 0, NULL, 0);
-
-	platform_device_register_simple(
-		"ak4554-adc-dac", 1, NULL, 0);
-
-	pdev = platform_device_register_resndata(
-		NULL, "rcar_sound", -1,
-		rsnd_resources, ARRAY_SIZE(rsnd_resources),
-		&rsnd_info, sizeof(rsnd_info));
-
-	clk = clk_get(&pdev->dev, "clk_b");
-	clk_set_rate(clk, 24576000);
-	clk_put(clk);
-
-	for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
-		struct platform_device_info cardinfo = {
-			.name           = "asoc-simple-card",
-			.id             = i,
-			.data           = &rsnd_card_info[i],
-			.size_data      = sizeof(struct asoc_simple_card_info),
-			.dma_mask	= DMA_BIT_MASK(32),
-		};
-
-		platform_device_register_full(&cardinfo);
-	}
-}
-
-static void __init bockw_init_late(void)
-{
-	r8a7778_init_late();
-	ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
-}
-
-static const char *bockw_boards_compat_dt[] __initdata = {
-	"renesas,bockw",
-	NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= bockw_init,
-	.dt_compat	= bockw_boards_compat_dt,
-	.init_late      = bockw_init_late,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
deleted file mode 100644
index 260d8319f..000000000
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ /dev/null
@@ -1,916 +0,0 @@
-/*
- * KZM-A9-GT board support
- *
- * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/input.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/as3711.h>
-#include <linux/mfd/tmio.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/sh_mobile_lcdc.h>
-
-#include "common.h"
-#include "intc.h"
-#include "irqs.h"
-#include "sh73a0.h"
-
-/*
- * external GPIO
- */
-#define GPIO_PCF8575_BASE	(310)
-#define GPIO_PCF8575_PORT10	(GPIO_PCF8575_BASE + 8)
-#define GPIO_PCF8575_PORT11	(GPIO_PCF8575_BASE + 9)
-#define GPIO_PCF8575_PORT12	(GPIO_PCF8575_BASE + 10)
-#define GPIO_PCF8575_PORT13	(GPIO_PCF8575_BASE + 11)
-#define GPIO_PCF8575_PORT14	(GPIO_PCF8575_BASE + 12)
-#define GPIO_PCF8575_PORT15	(GPIO_PCF8575_BASE + 13)
-#define GPIO_PCF8575_PORT16	(GPIO_PCF8575_BASE + 14)
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-/*
- * FSI-AK4648
- *
- * this command is required when playback.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/* SMSC 9221 */
-static struct resource smsc9221_resources[] = {
-	[0] = {
-		.start	= 0x10000000, /* CS4 */
-		.end	= 0x100000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= irq_pin(3), /* IRQ3 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9221_platdata = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smsc_device = {
-	.name		= "smsc911x",
-	.dev  = {
-		.platform_data = &smsc9221_platdata,
-	},
-	.resource	= smsc9221_resources,
-	.num_resources	= ARRAY_SIZE(smsc9221_resources),
-};
-
-/* USB external chip */
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip	= 0,
-	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.start	= 0x10010000,
-		.end	= 0x1001ffff - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= irq_pin(1), /* IRQ1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name	= "r8a66597_hcd",
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_resources),
-	.resource	= usb_resources,
-};
-
-/* USB Func CN17 */
-struct usbhs_private {
-	void __iomem *phy;
-	void __iomem *cr2;
-	struct renesas_usbhs_platform_info info;
-};
-
-#define IRQ15			irq_pin(15)
-#define USB_PHY_MODE		(1 << 4)
-#define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
-#define USB_PHY_ON		(1 << 1)
-#define USB_PHY_OFF		(1 << 0)
-#define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)
-
-#define usbhs_get_priv(pdev) \
-	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
-
-static int usbhs_get_vbus(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	return !((1 << 7) & __raw_readw(priv->cr2));
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* init phy */
-	__raw_writew(0x8a0a, priv->cr2);
-
-	return 0;
-}
-
-static int usbhs_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static irqreturn_t usbhs_interrupt(int irq, void *data)
-{
-	struct platform_device *pdev = data;
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	renesas_usbhs_call_notify_hotplug(pdev);
-
-	/* clear status */
-	__raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);
-
-	return IRQ_HANDLED;
-}
-
-static int usbhs_hardware_init(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-	int ret;
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
-
-	ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH,
-			  dev_name(&pdev->dev), pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "request_irq err\n");
-		return ret;
-	}
-
-	/* enable USB phy interrupt */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy);
-
-	return 0;
-}
-
-static int usbhs_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
-
-	free_irq(IRQ15, pdev);
-
-	return 0;
-}
-
-static u32 usbhs_pipe_cfg[] = {
-	USB_ENDPOINT_XFER_CONTROL,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usbhs_private usbhs_private = {
-	.phy	= IOMEM(0xe60781e0),		/* USBPHYINT */
-	.cr2	= IOMEM(0xe605810c),		/* USBCR2 */
-	.info = {
-		.platform_callback = {
-			.hardware_init	= usbhs_hardware_init,
-			.hardware_exit	= usbhs_hardware_exit,
-			.get_id		= usbhs_get_id,
-			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
-		},
-		.driver_param = {
-			.buswait_bwait	= 4,
-			.has_otg	= 1,
-			.pipe_type	= usbhs_pipe_cfg,
-			.pipe_size	= ARRAY_SIZE(usbhs_pipe_cfg),
-		},
-	},
-};
-
-static struct resource usbhs_resources[] = {
-	[0] = {
-		.start	= 0xE6890000,
-		.end	= 0xE68900e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(62),
-		.end	= gic_spi(62),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhs_device = {
-	.name	= "renesas_usbhs",
-	.id	= -1,
-	.dev = {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usbhs_private.info,
-	},
-	.num_resources	= ARRAY_SIZE(usbhs_resources),
-	.resource	= usbhs_resources,
-};
-
-/* LCDC */
-static struct fb_videomode kzm_lcdc_mode = {
-	.name		= "WVGA Panel",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 220,
-	.right_margin	= 110,
-	.hsync_len	= 70,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.clock_source = LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.lcd_modes	= &kzm_lcdc_mode,
-		.num_modes	= 1,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.panel_cfg = {
-			.width	= 152,
-			.height	= 91,
-		},
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-/* MMCIF */
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(140),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(141),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
-	.ocr		= MMC_VDD_165_195,
-	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.ccs_unsupported = true,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device mmc_device = {
-	.name		= "sh_mmcif",
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_platdata,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* Fixed 3.3V regulators to be used by SDHI0 */
-static struct regulator_consumer_supply vcc_sdhi0_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vcc_sdhi0_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
-	.consumer_supplies      = vcc_sdhi0_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi0_info = {
-	.supply_name = "SDHI0 Vcc",
-	.microvolts = 3300000,
-	.gpio = 15,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi0_init_data,
-};
-
-static struct platform_device vcc_sdhi0 = {
-	.name = "reg-fixed-voltage",
-	.id   = 0,
-	.dev  = {
-		.platform_data = &vcc_sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulators to be used by SDHI2 */
-static struct regulator_consumer_supply vcc_sdhi2_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
-};
-
-static struct regulator_init_data vcc_sdhi2_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi2_consumers),
-	.consumer_supplies      = vcc_sdhi2_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi2_info = {
-	.supply_name = "SDHI2 Vcc",
-	.microvolts = 3300000,
-	.gpio = 14,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi2_init_data,
-};
-
-static struct platform_device vcc_sdhi2 = {
-	.name = "reg-fixed-voltage",
-	.id   = 1,
-	.dev  = {
-		.platform_data = &vcc_sdhi2_info,
-	},
-};
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xee100000,
-		.end	= 0xee1000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(83),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(84),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* Micro SD */
-static struct tmio_mmc_data sdhi2_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI2_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI2_RX,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT |
-			  TMIO_MMC_USE_GPIO_CD |
-			  TMIO_MMC_WRPROTECT_DISABLE,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD,
-	.cd_gpio	= 13,
-};
-
-static struct resource sdhi2_resources[] = {
-	[0] = {
-		.name	= "SDHI2",
-		.start	= 0xee140000,
-		.end	= 0xee1400ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(103),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(104),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(105),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi2_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(sdhi2_resources),
-	.resource	= sdhi2_resources,
-	.dev	= {
-		.platform_data	= &sdhi2_info,
-	},
-};
-
-/* KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_BACK,	GPIO_PCF8575_PORT10,	"SW3"),
-	GPIO_KEY(KEY_RIGHT,	GPIO_PCF8575_PORT11,	"SW2-R"),
-	GPIO_KEY(KEY_LEFT,	GPIO_PCF8575_PORT12,	"SW2-L"),
-	GPIO_KEY(KEY_ENTER,	GPIO_PCF8575_PORT13,	"SW2-P"),
-	GPIO_KEY(KEY_UP,	GPIO_PCF8575_PORT14,	"SW2-U"),
-	GPIO_KEY(KEY_DOWN,	GPIO_PCF8575_PORT15,	"SW2-D"),
-	GPIO_KEY(KEY_HOME,	GPIO_PCF8575_PORT16,	"SW1"),
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.dev	= {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* FSI-AK4648 */
-static struct sh_fsi_platform_info fsi_info = {
-	.port_a = {
-		.tx_id = SHDMA_SLAVE_FSI2A_TX,
-	},
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xEC230000,
-		.end	= 0xEC230400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(146),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct asoc_simple_card_info fsi2_ak4648_info = {
-	.name		= "AK4648",
-	.card		= "FSI2A-AK4648",
-	.codec		= "ak4642-codec.0-0012",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-	},
-	.codec_dai = {
-		.name	= "ak4642-hifi",
-		.sysclk	= 11289600,
-	},
-};
-
-static struct platform_device fsi_ak4648_device = {
-	.name	= "asoc-simple-card",
-	.dev	= {
-		.platform_data	= &fsi2_ak4648_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_ak4648_device.dev.coherent_dma_mask,
-	},
-};
-
-/* I2C */
-
-/* StepDown1 is used to supply 1.315V to the CPU */
-static struct regulator_init_data as3711_sd1 = {
-	.constraints = {
-		.name = "1.315V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1315000,
-		.max_uV = 1335000,
-	},
-};
-
-/* StepDown2 is used to supply 1.8V to the CPU and to the board */
-static struct regulator_init_data as3711_sd2 = {
-	.constraints = {
-		.name = "1.8V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-	},
-};
-
-/*
- * StepDown3 is switched in parallel with StepDown2, seems to be off,
- * according to read-back pre-set register values
- */
-
-/* StepDown4 is used to supply 1.215V to the CPU and to the board */
-static struct regulator_init_data as3711_sd4 = {
-	.constraints = {
-		.name = "1.215V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1215000,
-		.max_uV = 1235000,
-	},
-};
-
-/* LDO1 is unused and unconnected */
-
-/* LDO2 is used to supply 2.8V to the CPU */
-static struct regulator_init_data as3711_ldo2 = {
-	.constraints = {
-		.name = "2.8V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO3 is used to supply 3.0V to the CPU */
-static struct regulator_init_data as3711_ldo3 = {
-	.constraints = {
-		.name = "3.0V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-	},
-};
-
-/* LDO4 is used to supply 2.8V to the board */
-static struct regulator_init_data as3711_ldo4 = {
-	.constraints = {
-		.name = "2.8V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO5 is switched parallel to LDO4, also set to 2.8V */
-static struct regulator_init_data as3711_ldo5 = {
-	.constraints = {
-		.name = "2.8V #2",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO6 is unused and unconnected */
-
-/* LDO7 is used to supply 1.15V to the CPU */
-static struct regulator_init_data as3711_ldo7 = {
-	.constraints = {
-		.name = "1.15V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1150000,
-		.max_uV = 1150000,
-	},
-};
-
-/* LDO8 is switched parallel to LDO7, also set to 1.15V */
-static struct regulator_init_data as3711_ldo8 = {
-	.constraints = {
-		.name = "1.15V CPU #2",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1150000,
-		.max_uV = 1150000,
-	},
-};
-
-static struct as3711_platform_data as3711_pdata = {
-	.regulator	= {
-		.init_data	= {
-			[AS3711_REGULATOR_SD_1] = &as3711_sd1,
-			[AS3711_REGULATOR_SD_2] = &as3711_sd2,
-			[AS3711_REGULATOR_SD_4] = &as3711_sd4,
-			[AS3711_REGULATOR_LDO_2] = &as3711_ldo2,
-			[AS3711_REGULATOR_LDO_3] = &as3711_ldo3,
-			[AS3711_REGULATOR_LDO_4] = &as3711_ldo4,
-			[AS3711_REGULATOR_LDO_5] = &as3711_ldo5,
-			[AS3711_REGULATOR_LDO_7] = &as3711_ldo7,
-			[AS3711_REGULATOR_LDO_8] = &as3711_ldo8,
-		},
-	},
-	.backlight	= {
-		.su2_fb = "sh_mobile_lcdc_fb.0",
-		.su2_max_uA = 36000,
-		.su2_feedback = AS3711_SU2_CURR_AUTO,
-		.su2_fbprot = AS3711_SU2_GPIO4,
-		.su2_auto_curr1 = true,
-		.su2_auto_curr2 = true,
-		.su2_auto_curr3 = true,
-	},
-};
-
-static struct pcf857x_platform_data pcf8575_pdata = {
-	.gpio_base	= GPIO_PCF8575_BASE,
-};
-
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("ak4648", 0x12),
-	},
-	{
-		I2C_BOARD_INFO("r2025sd", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("ak8975", 0x0c),
-		.irq = irq_pin(28), /* IRQ28 */
-	},
-	{
-		I2C_BOARD_INFO("adxl34x", 0x1d),
-		.irq = irq_pin(26), /* IRQ26 */
-	},
-	{
-		I2C_BOARD_INFO("as3711", 0x40),
-		.irq = intcs_evt2irq(0x3300), /* IRQ24 */
-		.platform_data = &as3711_pdata,
-	},
-};
-
-static struct i2c_board_info i2c1_devices[] = {
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = irq_pin(8), /* IRQ8 */
-	},
-};
-
-static struct i2c_board_info i2c3_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8575", 0x20),
-		.irq = irq_pin(19), /* IRQ19 */
-		.platform_data = &pcf8575_pdata,
-	},
-};
-
-static struct platform_device *kzm_devices[] __initdata = {
-	&smsc_device,
-	&usb_host_device,
-	&usbhs_device,
-	&lcdc_device,
-	&mmc_device,
-	&vcc_sdhi0,
-	&vcc_sdhi2,
-	&sdhi0_device,
-	&sdhi2_device,
-	&gpio_keys_device,
-	&fsi_device,
-	&fsi_ak4648_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
-	/* FSIA (AK4648) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_mclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_data_out", "fsia"),
-	/* I2C3 */
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
-				  "i2c3_1", "i2c3"),
-	/* LCD */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
-				  "lcd_data24", "lcd"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
-				  "lcd_sync", "lcd"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA4 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_data", "scifa4"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_ctrl", "scifa4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
-				  "sdhi2_data4", "sdhi2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
-				  "sdhi2_ctrl", "sdhi2"),
-	/* SMSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_cs4", "bsc"),
-	/* USB */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-sh73a0",
-				  "usb_vbus", "usb"),
-};
-
-static void __init kzm_init(void)
-{
-	regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
-
-	sh73a0_pinmux_init();
-
-	/* SMSC */
-	gpio_request_one(224, GPIOF_IN, NULL); /* IRQ3 */
-
-	/* LCDC */
-	gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
-	gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
-
-	/* Touchscreen */
-	gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
-#endif
-
-	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
-	i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
-
-	sh73a0_add_standard_devices();
-	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
-
-	sh73a0_pm_init();
-}
-
-static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
-{
-#define RESCNT2 IOMEM(0xe6188020)
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
-static const char *kzm9g_boards_compat_dt[] __initdata = {
-	"renesas,kzm9g",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9G_DT, "kzm9g")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.init_irq	= sh73a0_init_irq,
-	.init_machine	= kzm_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= sh73a0_earlytimer_init,
-	.restart	= kzm9g_restart,
-	.dt_compat	= kzm9g_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
deleted file mode 100644
index b15eb9232..000000000
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * marzen board support - Reference DT implementation
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- * Copyright (C) 2013  Simon Horman
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk/shmobile.h>
-#include <linux/clocksource.h>
-#include <linux/of_platform.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a7779.h"
-
-static void __init marzen_init_timer(void)
-{
-	r8a7779_clocks_init(r8a7779_read_mode_pins());
-	clocksource_of_init();
-}
-
-static void __init marzen_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */
-}
-
-static const char *marzen_boards_compat_dt[] __initdata = {
-	"renesas,marzen",
-	"renesas,marzen-reference",
-	NULL,
-};
-
-DT_MACHINE_START(MARZEN, "marzen")
-	.smp		= smp_ops(r8a7779_smp_ops),
-	.map_io		= r8a7779_map_io,
-	.init_early	= shmobile_init_delay,
-	.init_time	= marzen_init_timer,
-	.init_irq	= r8a7779_init_irq_dt,
-	.init_machine	= marzen_init,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= marzen_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
deleted file mode 100644
index 51db288f1..000000000
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * marzen board support
- *
- * Copyright (C) 2011, 2013  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- * Copyright (C) 2013  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/dma-mapping.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/camera-rcar.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/usb-rcar-phy.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/sh_hspi.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/tmio.h>
-
-#include <media/soc_camera.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/traps.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a7779.h"
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* USB PHY */
-static struct resource usb_phy_resources[] = {
-	[0] = {
-		.start		= 0xffe70800,
-		.end		= 0xffe70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct rcar_phy_platform_data usb_phy_platform_data;
-
-static struct platform_device usb_phy = {
-	.name		= "rcar_usb_phy",
-	.id		= -1,
-	.dev  = {
-		.platform_data = &usb_phy_platform_data,
-	},
-	.resource	= usb_phy_resources,
-	.num_resources	= ARRAY_SIZE(usb_phy_resources),
-};
-
-/* SMSC LAN89218 */
-static struct resource smsc911x_resources[] = {
-	[0] = {
-		.start		= 0x18000000, /* ExCS0 */
-		.end		= 0x180000ff, /* A1->A7 */
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= irq_pin(1), /* IRQ 1 */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_platdata = {
-	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.dev  = {
-		.platform_data = &smsc911x_platdata,
-	},
-	.resource	= smsc911x_resources,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "sdhi0",
-		.start	= 0xffe4c000,
-		.end	= 0xffe4c0ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x88),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct tmio_mmc_data sdhi0_platform_data = {
-	.chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX,
-	.flags        = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-	.capabilities = MMC_CAP_SD_HIGHSPEED,
-};
-
-static struct platform_device sdhi0_device = {
-	.name = "sh_mobile_sdhi",
-	.num_resources = ARRAY_SIZE(sdhi0_resources),
-	.resource = sdhi0_resources,
-	.id = 0,
-	.dev = {
-		.platform_data = &sdhi0_platform_data,
-	}
-};
-
-/* Thermal */
-static struct resource thermal_resources[] = {
-	[0] = {
-		.start		= 0xFFC48000,
-		.end		= 0xFFC48038 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device thermal_device = {
-	.name		= "rcar_thermal",
-	.resource	= thermal_resources,
-	.num_resources	= ARRAY_SIZE(thermal_resources),
-};
-
-/* HSPI */
-static struct resource hspi_resources[] = {
-	[0] = {
-		.start		= 0xFFFC7000,
-		.end		= 0xFFFC7018 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device hspi_device = {
-	.name	= "sh-hspi",
-	.id	= 0,
-	.resource	= hspi_resources,
-	.num_resources	= ARRAY_SIZE(hspi_resources),
-};
-
-/* LEDS */
-static struct gpio_led marzen_leds[] = {
-	{
-		.name		= "led2",
-		.gpio		= RCAR_GP_PIN(4, 29),
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "led3",
-		.gpio		= RCAR_GP_PIN(4, 30),
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "led4",
-		.gpio		= RCAR_GP_PIN(4, 31),
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-};
-
-static struct gpio_led_platform_data marzen_leds_pdata = {
-	.leds		= marzen_leds,
-	.num_leds	= ARRAY_SIZE(marzen_leds),
-};
-
-static struct platform_device leds_device = {
-	.name	= "leds-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &marzen_leds_pdata,
-	},
-};
-
-/* VIN */
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
-	.flags	= RCAR_VIN_BT656,
-};
-
-#define MARZEN_VIN(idx)						\
-static struct resource vin##idx##_resources[] __initdata = {	\
-	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),	\
-	DEFINE_RES_IRQ(gic_iid(0x5f + (idx))),			\
-};								\
-								\
-static struct platform_device_info vin##idx##_info __initdata = { \
-	.name		= "r8a7779-vin",			\
-	.id		= idx,					\
-	.res		= vin##idx##_resources,			\
-	.num_res	= ARRAY_SIZE(vin##idx##_resources),	\
-	.dma_mask	= DMA_BIT_MASK(32),			\
-	.data		= &vin_platform_data,			\
-	.size_data	= sizeof(vin_platform_data),		\
-}
-MARZEN_VIN(1);
-MARZEN_VIN(3);
-
-#define MARZEN_CAMERA(idx)					\
-static struct i2c_board_info camera##idx##_info = {		\
-	I2C_BOARD_INFO("adv7180", 0x20 + (idx)),		\
-};								\
-								\
-static struct soc_camera_link iclink##idx##_adv7180 = {		\
-	.bus_id		= 1 + 2 * (idx),			\
-	.i2c_adapter_id	= 0,					\
-	.board_info	= &camera##idx##_info,			\
-};								\
-								\
-static struct platform_device camera##idx##_device = {		\
-	.name	= "soc-camera-pdrv",				\
-	.id	= idx,						\
-	.dev	= {						\
-		.platform_data	= &iclink##idx##_adv7180,	\
-	},							\
-};
-
-MARZEN_CAMERA(0);
-MARZEN_CAMERA(1);
-
-static struct platform_device *marzen_devices[] __initdata = {
-	&eth_device,
-	&sdhi0_device,
-	&thermal_device,
-	&hspi_device,
-	&leds_device,
-	&usb_phy,
-	&camera0_device,
-	&camera1_device,
-};
-
-static const struct pinctrl_map marzen_pinctrl_map[] = {
-	/* DU (CN10: ARGB0, CN13: LVDS) */
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
-				  "du0_rgb888", "du0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
-				  "du0_sync_1", "du0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
-				  "du0_clk_out_0", "du0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
-				  "du1_rgb666", "du1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
-				  "du1_sync_1", "du1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
-				  "du1_clk_out", "du1"),
-	/* HSPI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
-				  "hspi0", "hspi0"),
-	/* SCIF2 (CN18: DEBUG0) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
-				  "scif2_data_c", "scif2"),
-	/* SCIF4 (CN19: DEBUG1) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
-				  "scif4_data", "scif4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_cd", "sdhi0"),
-	/* SMSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
-				  "intc_irq1_b", "intc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
-				  "lbsc_ex_cs0", "lbsc"),
-	/* USB0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
-				  "usb0", "usb0"),
-	/* USB1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
-				  "usb1", "usb1"),
-	/* USB2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
-				  "usb2", "usb2"),
-	/* VIN1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
-				  "vin1_clk", "vin1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
-				  "vin1_data8", "vin1"),
-	/* VIN3 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
-				  "vin3_clk", "vin3"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
-				  "vin3_data8", "vin3"),
-};
-
-static void __init marzen_init(void)
-{
-	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
-				ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_fixed(1, dummy_supplies,
-				ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(marzen_pinctrl_map,
-				  ARRAY_SIZE(marzen_pinctrl_map));
-	r8a7779_pinmux_init();
-	r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
-
-	r8a7779_add_standard_devices();
-	platform_device_register_full(&vin1_info);
-	platform_device_register_full(&vin3_info);
-	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
-}
-
-static const char *marzen_boards_compat_dt[] __initdata = {
-        "renesas,marzen",
-        NULL,
-};
-
-DT_MACHINE_START(MARZEN, "marzen")
-	.smp		= smp_ops(r8a7779_smp_ops),
-	.map_io		= r8a7779_map_io,
-	.init_early	= r8a7779_add_early_devices,
-	.init_irq	= r8a7779_init_irq_dt,
-	.init_machine	= marzen_init,
-	.init_late	= r8a7779_init_late,
-	.dt_compat	= marzen_boards_compat_dt,
-	.init_time	= r8a7779_earlytimer_init,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
deleted file mode 100644
index 9cac8247c..000000000
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- * R8A7740 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-
-#include "clock.h"
-#include "common.h"
-#include "r8a7740.h"
-
-/*
- *        |  MDx  |  XTAL1/EXTAL1   |  System   | EXTALR |
- *  Clock |-------+-----------------+  clock    | 32.768 |   RCLK
- *  Mode  | 2/1/0 | src         MHz |  source   |  KHz   |  source
- * -------+-------+-----------------+-----------+--------+----------
- *    0   | 0 0 0 | External  20~50 | XTAL1     |    O   |  EXTALR
- *    1   | 0 0 1 | Crystal   20~30 | XTAL1     |    O   |  EXTALR
- *    2   | 0 1 0 | External  40~50 | XTAL1 / 2 |    O   |  EXTALR
- *    3   | 0 1 1 | Crystal   40~50 | XTAL1 / 2 |    O   |  EXTALR
- *    4   | 1 0 0 | External  20~50 | XTAL1     |    x   |  XTAL1 / 1024
- *    5   | 1 0 1 | Crystal   20~30 | XTAL1     |    x   |  XTAL1 / 1024
- *    6   | 1 1 0 | External  40~50 | XTAL1 / 2 |    x   |  XTAL1 / 2048
- *    7   | 1 1 1 | Crystal   40~50 | XTAL1 / 2 |    x   |  XTAL1 / 2048
- */
-
-/* CPG registers */
-#define FRQCRA		IOMEM(0xe6150000)
-#define FRQCRB		IOMEM(0xe6150004)
-#define VCLKCR1		IOMEM(0xE6150008)
-#define VCLKCR2		IOMEM(0xE615000c)
-#define FRQCRC		IOMEM(0xe61500e0)
-#define FSIACKCR	IOMEM(0xe6150018)
-#define PLLC01CR	IOMEM(0xe6150028)
-
-#define SUBCKCR		IOMEM(0xe6150080)
-#define USBCKCR		IOMEM(0xe615008c)
-
-#define MSTPSR0		IOMEM(0xe6150030)
-#define MSTPSR1		IOMEM(0xe6150038)
-#define MSTPSR2		IOMEM(0xe6150040)
-#define MSTPSR3		IOMEM(0xe6150048)
-#define MSTPSR4		IOMEM(0xe615004c)
-#define FSIBCKCR	IOMEM(0xe6150090)
-#define HDMICKCR	IOMEM(0xe6150094)
-#define SMSTPCR0	IOMEM(0xe6150130)
-#define SMSTPCR1	IOMEM(0xe6150134)
-#define SMSTPCR2	IOMEM(0xe6150138)
-#define SMSTPCR3	IOMEM(0xe615013c)
-#define SMSTPCR4	IOMEM(0xe6150140)
-
-#define FSIDIVA		IOMEM(0xFE1F8000)
-#define FSIDIVB		IOMEM(0xFE1F8008)
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk extalr_clk = {
-	.rate	= 32768,
-};
-
-/*
- * 25MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk extal1_clk = {
-	.rate	= 25000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk extal2_clk = {
-	.rate	= 48000000,
-};
-
-/*
- * 27MHz default rate for the DV_CLKI root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk dv_clk = {
-	.rate	= 27000000,
-};
-
-SH_CLK_RATIO(div2,	1, 2);
-SH_CLK_RATIO(div1k,	1, 1024);
-
-SH_FIXED_RATIO_CLK(extal1_div2_clk,	extal1_clk,		div2);
-SH_FIXED_RATIO_CLK(extal1_div1024_clk,	extal1_clk,		div1k);
-SH_FIXED_RATIO_CLK(extal1_div2048_clk,	extal1_div2_clk,	div1k);
-SH_FIXED_RATIO_CLK(extal2_div2_clk,	extal2_clk,		div2);
-
-static struct sh_clk_ops followparent_clk_ops = {
-	.recalc	= followparent_recalc,
-};
-
-/* Main clock */
-static struct clk system_clk = {
-	.ops	= &followparent_clk_ops,
-};
-
-SH_FIXED_RATIO_CLK(system_div2_clk, system_clk,	div2);
-
-/* r_clk */
-static struct clk r_clk = {
-	.ops	= &followparent_clk_ops,
-};
-
-/* PLLC0/PLLC1 */
-static unsigned long pllc01_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLC01CR) & (1 << 14))
-		mult = ((__raw_readl(clk->enable_reg) >> 24) & 0x7f) + 1;
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc01_clk_ops = {
-	.recalc		= pllc01_recalc,
-};
-
-static struct clk pllc0_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &system_clk,
-	.enable_reg	= (void __iomem *)FRQCRC,
-};
-
-static struct clk pllc1_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &system_div2_clk,
-	.enable_reg	= (void __iomem *)FRQCRA,
-};
-
-/* PLLC1 / 2 */
-SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2);
-
-/* USB clock */
-/*
- * USBCKCR is controlling usb24 clock
- * bit[7] : parent clock
- * bit[6] : clock divide rate
- * And this bit[7] is used as a "usb24s" from other devices.
- * (Video clock / Sub clock / SPU clock)
- * You can controll this clock as a below.
- *
- * struct clk *usb24	= clk_get(dev,  "usb24");
- * struct clk *usb24s	= clk_get(NULL, "usb24s");
- * struct clk *system	= clk_get(NULL, "system_clk");
- * int rate = clk_get_rate(system);
- *
- * clk_set_parent(usb24s, system);  // for bit[7]
- * clk_set_rate(usb24, rate / 2);   // for bit[6]
- */
-static struct clk *usb24s_parents[] = {
-	[0] = &system_clk,
-	[1] = &extal2_clk
-};
-
-static int usb24s_enable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(USBCKCR) & ~(1 << 8), USBCKCR);
-
-	return 0;
-}
-
-static void usb24s_disable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(USBCKCR) | (1 << 8), USBCKCR);
-}
-
-static int usb24s_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i, ret;
-	u32 val;
-
-	if (!clk->parent_table || !clk->parent_num)
-		return -EINVAL;
-
-	/* Search the parent */
-	for (i = 0; i < clk->parent_num; i++)
-		if (clk->parent_table[i] == parent)
-			break;
-
-	if (i == clk->parent_num)
-		return -ENODEV;
-
-	ret = clk_reparent(clk, parent);
-	if (ret < 0)
-		return ret;
-
-	val = __raw_readl(USBCKCR);
-	val &= ~(1 << 7);
-	val |= i << 7;
-	__raw_writel(val, USBCKCR);
-
-	return 0;
-}
-
-static struct sh_clk_ops usb24s_clk_ops = {
-	.recalc		= followparent_recalc,
-	.enable		= usb24s_enable,
-	.disable	= usb24s_disable,
-	.set_parent	= usb24s_set_parent,
-};
-
-static struct clk usb24s_clk = {
-	.ops		= &usb24s_clk_ops,
-	.parent_table	= usb24s_parents,
-	.parent_num	= ARRAY_SIZE(usb24s_parents),
-	.parent		= &system_clk,
-};
-
-static unsigned long usb24_recalc(struct clk *clk)
-{
-	return clk->parent->rate /
-		((__raw_readl(USBCKCR) & (1 << 6)) ? 1 : 2);
-};
-
-static int usb24_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val;
-
-	/* closer to which ? parent->rate or parent->rate/2 */
-	val = __raw_readl(USBCKCR);
-	val &= ~(1 << 6);
-	val |= (rate > (clk->parent->rate / 4) * 3) << 6;
-	__raw_writel(val, USBCKCR);
-
-	return 0;
-}
-
-static struct sh_clk_ops usb24_clk_ops = {
-	.recalc		= usb24_recalc,
-	.set_rate	= usb24_set_rate,
-};
-
-static struct clk usb24_clk = {
-	.ops		= &usb24_clk_ops,
-	.parent		= &usb24s_clk,
-};
-
-/* External FSIACK/FSIBCK clock */
-static struct clk fsiack_clk = {
-};
-
-static struct clk fsibck_clk = {
-};
-
-static struct clk *main_clks[] = {
-	&extalr_clk,
-	&extal1_clk,
-	&extal2_clk,
-	&extal1_div2_clk,
-	&extal1_div1024_clk,
-	&extal1_div2048_clk,
-	&extal2_div2_clk,
-	&dv_clk,
-	&system_clk,
-	&system_div2_clk,
-	&r_clk,
-	&pllc0_clk,
-	&pllc1_clk,
-	&pllc1_div2_clk,
-	&usb24s_clk,
-	&usb24_clk,
-	&fsiack_clk,
-	&fsibck_clk,
-};
-
-/* DIV4 clocks */
-static void div4_kick(struct clk *clk)
-{
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = __raw_readl(FRQCRB);
-	value |= (1 << 31);
-	__raw_writel(value, FRQCRB);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 32, 36, 48, 0, 72, 96, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum {
-	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
-	DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
-	DIV4_NR
-};
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  8, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  4, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_HP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRB,  4, 0x6fff, 0),
-	[DIV4_HPP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
-	[DIV4_USBP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
-	[DIV4_S]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
-	[DIV4_ZB]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  8, 0x6fff, 0),
-	[DIV4_M3]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  4, 0x6fff, 0),
-	[DIV4_CP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  0, 0x6fff, 0),
-};
-
-/* DIV6 reparent */
-enum {
-	DIV6_HDMI,
-	DIV6_VCLK1, DIV6_VCLK2,
-	DIV6_FSIA, DIV6_FSIB,
-	DIV6_REPARENT_NR,
-};
-
-static struct clk *hdmi_parent[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &system_clk,
-	[2] = &dv_clk
-};
-
-static struct clk *vclk_parents[8] = {
-	[0] = &pllc1_div2_clk,
-	[2] = &dv_clk,
-	[3] = &usb24s_clk,
-	[4] = &extal1_div2_clk,
-	[5] = &extalr_clk,
-};
-
-static struct clk *fsia_parents[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &fsiack_clk, /* external clock */
-};
-
-static struct clk *fsib_parents[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &fsibck_clk, /* external clock */
-};
-
-static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
-	[DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0,
-				      hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
-	[DIV6_VCLK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0,
-				       vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3),
-	[DIV6_VCLK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0,
-				       vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3),
-	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
-				      fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2),
-	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
-				      fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2),
-};
-
-/* DIV6 clocks */
-enum {
-	DIV6_SUB,
-	DIV6_NR
-};
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_SUB]	= SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
-};
-
-/* HDMI1/2 clock */
-static unsigned long hdmi12_recalc(struct clk *clk)
-{
-	u32 val = __raw_readl(HDMICKCR);
-	int shift = (int)clk->priv;
-
-	val >>= shift;
-	val &= 0x3;
-
-	return clk->parent->rate / (1 << val);
-};
-
-static int hdmi12_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val, mask;
-	int i, shift;
-
-	for (i = 0; i < 3; i++)
-		if (rate == clk->parent->rate / (1 << i))
-			goto find;
-	return -ENODEV;
-
-find:
-	shift = (int)clk->priv;
-
-	val = __raw_readl(HDMICKCR);
-	mask = ~(0x3 << shift);
-	val = (val & mask) | i << shift;
-	__raw_writel(val, HDMICKCR);
-
-	return 0;
-};
-
-static struct sh_clk_ops hdmi12_clk_ops = {
-	.recalc		= hdmi12_recalc,
-	.set_rate	= hdmi12_set_rate,
-};
-
-static struct clk hdmi1_clk = {
-	.ops		= &hdmi12_clk_ops,
-	.priv		= (void *)9,
-	.parent		= &div6_reparent_clks[DIV6_HDMI],  /* late install */
-};
-
-static struct clk hdmi2_clk = {
-	.ops		= &hdmi12_clk_ops,
-	.priv		= (void *)11,
-	.parent		= &div6_reparent_clks[DIV6_HDMI], /* late install */
-};
-
-static struct clk *late_main_clks[] = {
-	&hdmi1_clk,
-	&hdmi2_clk,
-};
-
-/* FSI DIV */
-enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR };
-
-static struct clk fsidivs[] = {
-	[FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]),
-	[FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]),
-};
-
-/* MSTP */
-enum {
-	MSTP128, MSTP127, MSTP125,
-	MSTP116, MSTP111, MSTP100, MSTP117,
-
-	MSTP230, MSTP229,
-	MSTP222,
-	MSTP218, MSTP217, MSTP216, MSTP214,
-	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-
-	MSTP329, MSTP328, MSTP323, MSTP320,
-	MSTP314, MSTP313, MSTP312,
-	MSTP309, MSTP304,
-
-	MSTP416, MSTP415, MSTP407, MSTP406,
-
-	MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP128] = SH_CLK_MSTP32(&div4_clks[DIV4_S],	SMSTPCR1, 28, 0), /* CEU21 */
-	[MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S],	SMSTPCR1, 27, 0), /* CEU20 */
-	[MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 25, 0), /* TMU0 */
-	[MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1, 17, 0), /* LCDC1 */
-	[MSTP116] = SH_CLK_MSTP32(&div4_clks[DIV4_HPP],	SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 11, 0), /* TMU1 */
-	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1,  0, 0), /* LCDC0 */
-
-	[MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 30, 0), /* SCIFA6 */
-	[MSTP229] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR2, 29, 0), /* INTCA */
-	[MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 22, 0), /* SCIFA7 */
-	[MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 18, 0), /* DMAC1 */
-	[MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 17, 0), /* DMAC2 */
-	[MSTP216] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 16, 0), /* DMAC3 */
-	[MSTP214] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 14, 0), /* USBDMAC */
-	[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  7, 0), /* SCIFA5 */
-	[MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  6, 0), /* SCIFB */
-	[MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  4, 0), /* SCIFA0 */
-	[MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  3, 0), /* SCIFA1 */
-	[MSTP202] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  2, 0), /* SCIFA2 */
-	[MSTP201] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  1, 0), /* SCIFA3 */
-	[MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  0, 0), /* SCIFA4 */
-
-	[MSTP329] = SH_CLK_MSTP32(&r_clk,		SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 28, 0), /* FSI */
-	[MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 20, 0), /* USBF */
-	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 12, 0), /* MMC */
-	[MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3,  9, 0), /* GEther */
-	[MSTP304] = SH_CLK_MSTP32(&div4_clks[DIV4_CP],	SMSTPCR3,  4, 0), /* TPU0 */
-
-	[MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 16, 0), /* USBHOST */
-	[MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 15, 0), /* SDHI2 */
-	[MSTP407] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  7, 0), /* USB-Func */
-	[MSTP406] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  6, 0), /* USB Phy */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("extalr",			&extalr_clk),
-	CLKDEV_CON_ID("extal1",			&extal1_clk),
-	CLKDEV_CON_ID("extal2",			&extal2_clk),
-	CLKDEV_CON_ID("extal1_div2",		&extal1_div2_clk),
-	CLKDEV_CON_ID("extal1_div1024",		&extal1_div1024_clk),
-	CLKDEV_CON_ID("extal1_div2048",		&extal1_div2048_clk),
-	CLKDEV_CON_ID("extal2_div2",		&extal2_div2_clk),
-	CLKDEV_CON_ID("dv_clk",			&dv_clk),
-	CLKDEV_CON_ID("system_clk",		&system_clk),
-	CLKDEV_CON_ID("system_div2_clk",	&system_div2_clk),
-	CLKDEV_CON_ID("r_clk",			&r_clk),
-	CLKDEV_CON_ID("pllc0_clk",		&pllc0_clk),
-	CLKDEV_CON_ID("pllc1_clk",		&pllc1_clk),
-	CLKDEV_CON_ID("pllc1_div2_clk",		&pllc1_div2_clk),
-	CLKDEV_CON_ID("usb24s",			&usb24s_clk),
-	CLKDEV_CON_ID("hdmi1",			&hdmi1_clk),
-	CLKDEV_CON_ID("hdmi2",			&hdmi2_clk),
-	CLKDEV_CON_ID("video1",			&div6_reparent_clks[DIV6_VCLK1]),
-	CLKDEV_CON_ID("video2",			&div6_reparent_clks[DIV6_VCLK2]),
-	CLKDEV_CON_ID("fsiack",			&fsiack_clk),
-	CLKDEV_CON_ID("fsibck",			&fsibck_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("i_clk",			&div4_clks[DIV4_I]),
-	CLKDEV_CON_ID("zg_clk",			&div4_clks[DIV4_ZG]),
-	CLKDEV_CON_ID("b_clk",			&div4_clks[DIV4_B]),
-	CLKDEV_CON_ID("m1_clk",			&div4_clks[DIV4_M1]),
-	CLKDEV_CON_ID("hp_clk",			&div4_clks[DIV4_HP]),
-	CLKDEV_CON_ID("hpp_clk",		&div4_clks[DIV4_HPP]),
-	CLKDEV_CON_ID("s_clk",			&div4_clks[DIV4_S]),
-	CLKDEV_CON_ID("zb_clk",			&div4_clks[DIV4_ZB]),
-	CLKDEV_CON_ID("m3_clk",			&div4_clks[DIV4_M3]),
-	CLKDEV_CON_ID("cp_clk",			&div4_clks[DIV4_CP]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("sub_clk",		&div6_clks[DIV6_SUB]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0",	&mstp_clks[MSTP100]),
-	CLKDEV_DEV_ID("i2c-sh_mobile.0",	&mstp_clks[MSTP116]),
-	CLKDEV_DEV_ID("fff20000.i2c",		&mstp_clks[MSTP116]),
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1",	&mstp_clks[MSTP117]),
-	CLKDEV_DEV_ID("sh_mobile_ceu.0",	&mstp_clks[MSTP127]),
-	CLKDEV_DEV_ID("sh_mobile_ceu.1",	&mstp_clks[MSTP128]),
-
-	CLKDEV_DEV_ID("sh-sci.4",		&mstp_clks[MSTP200]),
-	CLKDEV_DEV_ID("e6c80000.serial",	&mstp_clks[MSTP200]),
-	CLKDEV_DEV_ID("sh-sci.3",		&mstp_clks[MSTP201]),
-	CLKDEV_DEV_ID("e6c70000.serial",	&mstp_clks[MSTP201]),
-	CLKDEV_DEV_ID("sh-sci.2",		&mstp_clks[MSTP202]),
-	CLKDEV_DEV_ID("e6c60000.serial",	&mstp_clks[MSTP202]),
-	CLKDEV_DEV_ID("sh-sci.1",		&mstp_clks[MSTP203]),
-	CLKDEV_DEV_ID("e6c50000.serial",	&mstp_clks[MSTP203]),
-	CLKDEV_DEV_ID("sh-sci.0",		&mstp_clks[MSTP204]),
-	CLKDEV_DEV_ID("e6c40000.serial",	&mstp_clks[MSTP204]),
-	CLKDEV_DEV_ID("sh-sci.8",		&mstp_clks[MSTP206]),
-	CLKDEV_DEV_ID("e6c30000.serial",	&mstp_clks[MSTP206]),
-	CLKDEV_DEV_ID("sh-sci.5",		&mstp_clks[MSTP207]),
-	CLKDEV_DEV_ID("e6cb0000.serial",	&mstp_clks[MSTP207]),
-	CLKDEV_DEV_ID("sh-dma-engine.3",	&mstp_clks[MSTP214]),
-	CLKDEV_DEV_ID("sh-dma-engine.2",	&mstp_clks[MSTP216]),
-	CLKDEV_DEV_ID("sh-dma-engine.1",	&mstp_clks[MSTP217]),
-	CLKDEV_DEV_ID("sh-dma-engine.0",	&mstp_clks[MSTP218]),
-	CLKDEV_DEV_ID("sh-sci.7",		&mstp_clks[MSTP222]),
-	CLKDEV_DEV_ID("e6cd0000.serial",	&mstp_clks[MSTP222]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.0",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.1",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.2",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.3",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("sh-sci.6",		&mstp_clks[MSTP230]),
-	CLKDEV_DEV_ID("e6cc0000.serial",	&mstp_clks[MSTP230]),
-
-	CLKDEV_DEV_ID("sh_fsi2",		&mstp_clks[MSTP328]),
-	CLKDEV_DEV_ID("fe1f0000.sound",		&mstp_clks[MSTP328]),
-	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
-	CLKDEV_DEV_ID("e6c20000.i2c",		&mstp_clks[MSTP323]),
-	CLKDEV_DEV_ID("renesas_usbhs",		&mstp_clks[MSTP320]),
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0",	&mstp_clks[MSTP314]),
-	CLKDEV_DEV_ID("e6850000.sd",		&mstp_clks[MSTP314]),
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1",	&mstp_clks[MSTP313]),
-	CLKDEV_DEV_ID("e6860000.sd",		&mstp_clks[MSTP313]),
-	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
-	CLKDEV_DEV_ID("e6bd0000.mmc",		&mstp_clks[MSTP312]),
-	CLKDEV_DEV_ID("r8a7740-gether",		&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("e9a00000.ethernet",	&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("renesas-tpu-pwm",	&mstp_clks[MSTP304]),
-	CLKDEV_DEV_ID("e6600000.pwm",		&mstp_clks[MSTP304]),
-
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
-	CLKDEV_DEV_ID("e6870000.sd",		&mstp_clks[MSTP415]),
-
-	/* ICK */
-	CLKDEV_ICK_ID("fck",	"sh-tmu.1",		&mstp_clks[MSTP111]),
-	CLKDEV_ICK_ID("fck",	"fff90000.timer",	&mstp_clks[MSTP111]),
-	CLKDEV_ICK_ID("fck",	"sh-tmu.0",		&mstp_clks[MSTP125]),
-	CLKDEV_ICK_ID("fck",	"fff80000.timer",	&mstp_clks[MSTP125]),
-	CLKDEV_ICK_ID("fck",	"sh-cmt-48.1",		&mstp_clks[MSTP329]),
-	CLKDEV_ICK_ID("fck",	"e6138000.timer",	&mstp_clks[MSTP329]),
-	CLKDEV_ICK_ID("host",	"renesas_usbhs",	&mstp_clks[MSTP416]),
-	CLKDEV_ICK_ID("func",	"renesas_usbhs",	&mstp_clks[MSTP407]),
-	CLKDEV_ICK_ID("phy",	"renesas_usbhs",	&mstp_clks[MSTP406]),
-	CLKDEV_ICK_ID("pci",	"renesas_usbhs",	&div4_clks[DIV4_USBP]),
-	CLKDEV_ICK_ID("usb24",	"renesas_usbhs",	&usb24_clk),
-	CLKDEV_ICK_ID("ick",	"sh-mobile-hdmi",	&div6_reparent_clks[DIV6_HDMI]),
-
-	CLKDEV_ICK_ID("icka", "sh_fsi2",	&div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_ICK_ID("ickb", "sh_fsi2",	&div6_reparent_clks[DIV6_FSIB]),
-	CLKDEV_ICK_ID("diva", "sh_fsi2",	&fsidivs[FSIDIV_A]),
-	CLKDEV_ICK_ID("divb", "sh_fsi2",	&fsidivs[FSIDIV_B]),
-	CLKDEV_ICK_ID("xcka", "sh_fsi2",	&fsiack_clk),
-	CLKDEV_ICK_ID("xckb", "sh_fsi2",	&fsibck_clk),
-};
-
-void __init r8a7740_clock_init(u8 md_ck)
-{
-	int k, ret = 0;
-
-	/* detect system clock parent */
-	if (md_ck & MD_CK1)
-		system_clk.parent = &extal1_div2_clk;
-	else
-		system_clk.parent = &extal1_clk;
-
-	/* detect RCLK parent */
-	switch (md_ck & (MD_CK2 | MD_CK1)) {
-	case MD_CK2 | MD_CK1:
-		r_clk.parent = &extal1_div2048_clk;
-		break;
-	case MD_CK2:
-		r_clk.parent = &extal1_div1024_clk;
-		break;
-	case MD_CK1:
-	default:
-		r_clk.parent = &extalr_clk;
-		break;
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_div6_reparent_register(div6_reparent_clks,
-						    DIV6_REPARENT_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7740 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
deleted file mode 100644
index e8510c355..000000000
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * r8a7778 clock framework support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- *     MD      MD      MD      MD       PLLA   PLLB    EXTAL   clki    clkz
- *     19      18      12      11                      (HMz)   (MHz)   (MHz)
- *----------------------------------------------------------------------------
- *     1       0       0       0       x21     x21     38.00   800     800
- *     1       0       0       1       x24     x24     33.33   800     800
- *     1       0       1       0       x28     x28     28.50   800     800
- *     1       0       1       1       x32     x32     25.00   800     800
- *     1       1       0       1       x24     x21     33.33   800     700
- *     1       1       1       0       x28     x21     28.50   800     600
- *     1       1       1       1       x32     x24     25.00   800     600
- */
-
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-#include "common.h"
-
-#define MSTPCR0		IOMEM(0xffc80030)
-#define MSTPCR1		IOMEM(0xffc80034)
-#define MSTPCR3		IOMEM(0xffc8003c)
-#define MSTPSR1		IOMEM(0xffc80044)
-#define MSTPSR4		IOMEM(0xffc80048)
-#define MSTPSR6		IOMEM(0xffc8004c)
-#define MSTPCR4		IOMEM(0xffc80050)
-#define MSTPCR5		IOMEM(0xffc80054)
-#define MSTPCR6		IOMEM(0xffc80058)
-#define MODEMR		0xFFCC0020
-
-#define MD(nr)	BIT(nr)
-
-/* ioremap() through clock mapping mandatory to avoid
- * collision with ARM coherent DMA virtual memory range.
- */
-
-static struct clk_mapping cpg_mapping = {
-	.phys	= 0xffc80000,
-	.len	= 0x80,
-};
-
-static struct clk extal_clk = {
-	/* .rate will be updated on r8a7778_clock_init() */
-	.mapping = &cpg_mapping,
-};
-
-static struct clk audio_clk_a = {
-};
-
-static struct clk audio_clk_b = {
-};
-
-static struct clk audio_clk_c = {
-};
-
-/*
- * clock ratio of these clock will be updated
- * on r8a7778_clock_init()
- */
-SH_FIXED_RATIO_CLK_SET(plla_clk,	extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(pllb_clk,	extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(i_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s1_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s3_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s4_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(b_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(out_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(p_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(g_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(z_clk,		pllb_clk,  1, 1);
-
-static struct clk *main_clks[] = {
-	&extal_clk,
-	&plla_clk,
-	&pllb_clk,
-	&i_clk,
-	&s_clk,
-	&s1_clk,
-	&s3_clk,
-	&s4_clk,
-	&b_clk,
-	&out_clk,
-	&p_clk,
-	&g_clk,
-	&z_clk,
-	&audio_clk_a,
-	&audio_clk_b,
-	&audio_clk_c,
-};
-
-enum {
-	MSTP531, MSTP530,
-	MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523,
-	MSTP331,
-	MSTP323, MSTP322, MSTP321,
-	MSTP311, MSTP310,
-	MSTP309, MSTP308, MSTP307,
-	MSTP114,
-	MSTP110, MSTP109,
-	MSTP100,
-	MSTP030,
-	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
-	MSTP009, MSTP008, MSTP007,
-	MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */
-	[MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */
-	[MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */
-	[MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */
-	[MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */
-	[MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */
-	[MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */
-	[MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */
-	[MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */
-	[MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */
-	[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
-	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
-	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
-	[MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
-	[MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
-	[MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  9, 0), /* SSI6 */
-	[MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  8, 0), /* SSI7 */
-	[MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  7, 0), /* SSI8 */
-	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
-	[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
-	[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1,  9, 0), /* VIN1 */
-	[MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1,  0, 0), /* USB0/1 */
-	[MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */
-	[MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */
-	[MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */
-	[MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */
-	[MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */
-	[MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */
-	[MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */
-	[MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */
-	[MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */
-	[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
-	[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
-	[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
-	[MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
-	[MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
-	[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
-	[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  9, 0), /* SSI3 */
-	[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  8, 0), /* SRU */
-	[MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0,  7, 0), /* HSPI */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main */
-	CLKDEV_CON_ID("shyway_clk",	&s_clk),
-	CLKDEV_CON_ID("peripheral_clk",	&p_clk),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
-	CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
-	CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
-	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
-	CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
-	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
-	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
-	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
-	CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
-	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
-
-	CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
-	CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
-	CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
-	CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
-	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
-	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
-	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
-	CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
-	CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
-	CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
-	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
-	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
-	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
-	CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
-	CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
-	CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
-	CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
-	CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
-	CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
-	CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
-	CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
-	CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
-	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
-	CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]),
-	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
-	CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]),
-};
-
-void __init r8a7778_clock_init(void)
-{
-	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
-	u32 mode;
-	int k, ret = 0;
-
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
-	switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) {
-	case MD(19):
-		extal_clk.rate = 38000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	21, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(11):
-		extal_clk.rate = 33333333;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
-		break;
-	case MD(19) | MD(12):
-		extal_clk.rate = 28500000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	28, 1);
-		break;
-	case MD(19) | MD(12) | MD(11):
-		extal_clk.rate = 25000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	32, 1);
-		break;
-	case MD(19) | MD(18) | MD(11):
-		extal_clk.rate = 33333333;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(18) | MD(12):
-		extal_clk.rate = 28500000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(18) | MD(12) | MD(11):
-		extal_clk.rate = 25000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
-		break;
-	default:
-		BUG();
-	}
-
-	if (mode & MD(1)) {
-		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
-		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 3);
-		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 6);
-		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 12);
-		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 18);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 18);
-		} else {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
-		}
-	} else {
-		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
-		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 16);
-		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 16);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 16);
-		} else {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
-		}
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7778 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
deleted file mode 100644
index fa8ab2cc9..000000000
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * r8a7779 clock framework support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/bitops.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <linux/sh_timer.h>
-
-#include "clock.h"
-#include "common.h"
-#include "r8a7779.h"
-
-/*
- *		MD1 = 1			MD1 = 0
- *		(PLLA = 1500)		(PLLA = 1600)
- *		(MHz)			(MHz)
- *------------------------------------------------+--------------------
- * clkz		1000   (2/3)		800   (1/2)
- * clkzs	 250   (1/6)		200   (1/8)
- * clki		 750   (1/2)		800   (1/2)
- * clks		 250   (1/6)		200   (1/8)
- * clks1	 125   (1/12)		100   (1/16)
- * clks3	 187.5 (1/8)		200   (1/8)
- * clks4	  93.7 (1/16)		100   (1/16)
- * clkp		  62.5 (1/24)		 50   (1/32)
- * clkg		  62.5 (1/24)		 66.6 (1/24)
- * clkb, CLKOUT
- * (MD2 = 0)	  62.5 (1/24)		 66.6 (1/24)
- * (MD2 = 1)	  41.6 (1/36)		 50   (1/32)
-*/
-
-#define MD(nr)	BIT(nr)
-
-#define MSTPCR0		IOMEM(0xffc80030)
-#define MSTPCR1		IOMEM(0xffc80034)
-#define MSTPCR3		IOMEM(0xffc8003c)
-#define MSTPSR1		IOMEM(0xffc80044)
-
-/* ioremap() through clock mapping mandatory to avoid
- * collision with ARM coherent DMA virtual memory range.
- */
-
-static struct clk_mapping cpg_mapping = {
-	.phys	= 0xffc80000,
-	.len	= 0x80,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk plla_clk = {
-	/* .rate will be updated on r8a7779_clock_init() */
-	.mapping	= &cpg_mapping,
-};
-
-/*
- * clock ratio of these clock will be updated
- * on r8a7779_clock_init()
- */
-SH_FIXED_RATIO_CLK_SET(clkz_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clkzs_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clki_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clks_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clks1_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clks3_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clks4_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clkb_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clkout_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clkp_clk,	plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(clkg_clk,	plla_clk, 1, 1);
-
-static struct clk *main_clks[] = {
-	&plla_clk,
-	&clkz_clk,
-	&clkzs_clk,
-	&clki_clk,
-	&clks_clk,
-	&clks1_clk,
-	&clks3_clk,
-	&clks4_clk,
-	&clkb_clk,
-	&clkout_clk,
-	&clkp_clk,
-	&clkg_clk,
-};
-
-enum { MSTP323, MSTP322, MSTP321, MSTP320,
-	MSTP120,
-	MSTP116, MSTP115, MSTP114,
-	MSTP110, MSTP109, MSTP108,
-	MSTP103, MSTP101, MSTP100,
-	MSTP030,
-	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015, MSTP014,
-	MSTP007,
-	MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP323] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 23, 0), /* SDHI0 */
-	[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
-	[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
-	[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
-	[MSTP120] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 20, MSTPSR1, 0), /* VIN3 */
-	[MSTP116] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 16, MSTPSR1, 0), /* PCIe */
-	[MSTP115] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 15, MSTPSR1, 0), /* SATA */
-	[MSTP114] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 14, MSTPSR1, 0), /* Ether */
-	[MSTP110] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 10, MSTPSR1, 0), /* VIN0 */
-	[MSTP109] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1,  9, MSTPSR1, 0), /* VIN1 */
-	[MSTP108] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1,  8, MSTPSR1, 0), /* VIN2 */
-	[MSTP103] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1,  3, MSTPSR1, 0), /* DU */
-	[MSTP101] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1,  1, MSTPSR1, 0), /* USB2 */
-	[MSTP100] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1,  0, MSTPSR1, 0), /* USB0/1 */
-	[MSTP030] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 30, 0), /* I2C0 */
-	[MSTP029] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 29, 0), /* I2C1 */
-	[MSTP028] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 28, 0), /* I2C2 */
-	[MSTP027] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 27, 0), /* I2C3 */
-	[MSTP026] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 26, 0), /* SCIF0 */
-	[MSTP025] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 25, 0), /* SCIF1 */
-	[MSTP024] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 24, 0), /* SCIF2 */
-	[MSTP023] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 23, 0), /* SCIF3 */
-	[MSTP022] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 22, 0), /* SCIF4 */
-	[MSTP021] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 21, 0), /* SCIF5 */
-	[MSTP016] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 16, 0), /* TMU0 */
-	[MSTP015] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 15, 0), /* TMU1 */
-	[MSTP014] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 14, 0), /* TMU2 */
-	[MSTP007] = SH_CLK_MSTP32(&clks_clk, MSTPCR0,  7, 0), /* HSPI */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("plla_clk", &plla_clk),
-	CLKDEV_CON_ID("clkz_clk", &clkz_clk),
-	CLKDEV_CON_ID("clkzs_clk", &clkzs_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("shyway_clk",	&clks_clk),
-	CLKDEV_CON_ID("bus_clk",	&clkout_clk),
-	CLKDEV_CON_ID("shyway4_clk",	&clks4_clk),
-	CLKDEV_CON_ID("shyway3_clk",	&clks3_clk),
-	CLKDEV_CON_ID("shyway1_clk",	&clks1_clk),
-	CLKDEV_CON_ID("peripheral_clk",	&clkp_clk),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("r8a7779-vin.3", &mstp_clks[MSTP120]), /* VIN3 */
-	CLKDEV_DEV_ID("rcar-pcie", &mstp_clks[MSTP116]), /* PCIe */
-	CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
-	CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */
-	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
-	CLKDEV_DEV_ID("r8a7779-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
-	CLKDEV_DEV_ID("r8a7779-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
-	CLKDEV_DEV_ID("r8a7779-vin.2", &mstp_clks[MSTP108]), /* VIN2 */
-	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
-	CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
-	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
-	CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
-	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), /* TMU0 */
-	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
-	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("ffe4e000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
-	CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP320]), /* SDHI3 */
-	CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */
-};
-
-void __init r8a7779_clock_init(void)
-{
-	u32 mode = r8a7779_read_mode_pins();
-	int k, ret = 0;
-
-	if (mode & MD(1)) {
-		plla_clk.rate = 1500000000;
-
-		SH_CLK_SET_RATIO(&clkz_clk_ratio,	2, 3);
-		SH_CLK_SET_RATIO(&clkzs_clk_ratio,	1, 6);
-		SH_CLK_SET_RATIO(&clki_clk_ratio,	1, 2);
-		SH_CLK_SET_RATIO(&clks_clk_ratio,	1, 6);
-		SH_CLK_SET_RATIO(&clks1_clk_ratio,	1, 12);
-		SH_CLK_SET_RATIO(&clks3_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&clks4_clk_ratio,	1, 16);
-		SH_CLK_SET_RATIO(&clkp_clk_ratio,	1, 24);
-		SH_CLK_SET_RATIO(&clkg_clk_ratio,	1, 24);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&clkb_clk_ratio,	1, 36);
-			SH_CLK_SET_RATIO(&clkout_clk_ratio,	1, 36);
-		} else {
-			SH_CLK_SET_RATIO(&clkb_clk_ratio,	1, 24);
-			SH_CLK_SET_RATIO(&clkout_clk_ratio,	1, 24);
-		}
-	} else {
-		plla_clk.rate = 1600000000;
-
-		SH_CLK_SET_RATIO(&clkz_clk_ratio,	1, 2);
-		SH_CLK_SET_RATIO(&clkzs_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&clki_clk_ratio,	1, 2);
-		SH_CLK_SET_RATIO(&clks_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&clks1_clk_ratio,	1, 16);
-		SH_CLK_SET_RATIO(&clks3_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&clks4_clk_ratio,	1, 16);
-		SH_CLK_SET_RATIO(&clkp_clk_ratio,	1, 32);
-		SH_CLK_SET_RATIO(&clkg_clk_ratio,	1, 24);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&clkb_clk_ratio,	1, 32);
-			SH_CLK_SET_RATIO(&clkout_clk_ratio,	1, 32);
-		} else {
-			SH_CLK_SET_RATIO(&clkb_clk_ratio,	1, 24);
-			SH_CLK_SET_RATIO(&clkout_clk_ratio,	1, 24);
-		}
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7779 clocks\n");
-}
-
-/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
-void __init __weak r8a7779_register_twd(void) { }
-
-void __init r8a7779_earlytimer_init(void)
-{
-	r8a7779_clock_init();
-	r8a7779_register_twd();
-	shmobile_earlytimer_init();
-}
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
deleted file mode 100644
index 3855fb024..000000000
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/*
- * sh73a0 clock framework support
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <asm/processor.h>
-#include "clock.h"
-#include "common.h"
-
-#define FRQCRA		IOMEM(0xe6150000)
-#define FRQCRB		IOMEM(0xe6150004)
-#define FRQCRD		IOMEM(0xe61500e4)
-#define VCLKCR1		IOMEM(0xe6150008)
-#define VCLKCR2		IOMEM(0xe615000C)
-#define VCLKCR3		IOMEM(0xe615001C)
-#define ZBCKCR		IOMEM(0xe6150010)
-#define FLCKCR		IOMEM(0xe6150014)
-#define SD0CKCR		IOMEM(0xe6150074)
-#define SD1CKCR		IOMEM(0xe6150078)
-#define SD2CKCR		IOMEM(0xe615007C)
-#define FSIACKCR	IOMEM(0xe6150018)
-#define FSIBCKCR	IOMEM(0xe6150090)
-#define SUBCKCR		IOMEM(0xe6150080)
-#define SPUACKCR	IOMEM(0xe6150084)
-#define SPUVCKCR	IOMEM(0xe6150094)
-#define MSUCKCR		IOMEM(0xe6150088)
-#define HSICKCR		IOMEM(0xe615008C)
-#define MFCK1CR		IOMEM(0xe6150098)
-#define MFCK2CR		IOMEM(0xe615009C)
-#define DSITCKCR	IOMEM(0xe6150060)
-#define DSI0PCKCR	IOMEM(0xe6150064)
-#define DSI1PCKCR	IOMEM(0xe6150068)
-#define DSI0PHYCR	0xe615006C
-#define DSI1PHYCR	0xe6150070
-#define PLLECR		IOMEM(0xe61500d0)
-#define PLL0CR		IOMEM(0xe61500d8)
-#define PLL1CR		IOMEM(0xe6150028)
-#define PLL2CR		IOMEM(0xe615002c)
-#define PLL3CR		IOMEM(0xe61500dc)
-#define SMSTPCR0	IOMEM(0xe6150130)
-#define SMSTPCR1	IOMEM(0xe6150134)
-#define SMSTPCR2	IOMEM(0xe6150138)
-#define SMSTPCR3	IOMEM(0xe615013c)
-#define SMSTPCR4	IOMEM(0xe6150140)
-#define SMSTPCR5	IOMEM(0xe6150144)
-#define CKSCR		IOMEM(0xe61500c0)
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk r_clk = {
-	.rate           = 32768,
-};
-
-/*
- * 26MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh73a0_extal1_clk = {
-	.rate		= 26000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh73a0_extal2_clk = {
-	.rate		= 48000000,
-};
-
-static struct sh_clk_ops main_clk_ops = {
-	.recalc		= followparent_recalc,
-};
-
-/* Main clock */
-static struct clk main_clk = {
-	/* .parent wll be set on sh73a0_clock_init() */
-	.ops		= &main_clk_ops,
-};
-
-/* PLL0, PLL1, PLL2, PLL3 */
-static unsigned long pll_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) {
-		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1);
-		/* handle CFG bit for PLL1 and PLL2 */
-		switch (clk->enable_bit) {
-		case 1:
-		case 2:
-			if (__raw_readl(clk->enable_reg) & (1 << 20))
-				mult *= 2;
-		}
-	}
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
-	.recalc		= pll_recalc,
-};
-
-static struct clk pll0_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL0CR,
-	.enable_bit	= 0,
-};
-
-static struct clk pll1_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL1CR,
-	.enable_bit	= 1,
-};
-
-static struct clk pll2_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL2CR,
-	.enable_bit	= 2,
-};
-
-static struct clk pll3_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL3CR,
-	.enable_bit	= 3,
-};
-
-/* A fixed divide block */
-SH_CLK_RATIO(div2,  1, 2);
-SH_CLK_RATIO(div7,  1, 7);
-SH_CLK_RATIO(div13, 1, 13);
-
-SH_FIXED_RATIO_CLK(extal1_div2_clk,	sh73a0_extal1_clk,	div2);
-SH_FIXED_RATIO_CLK(extal2_div2_clk,	sh73a0_extal2_clk,	div2);
-SH_FIXED_RATIO_CLK(main_div2_clk,	main_clk,		div2);
-SH_FIXED_RATIO_CLK(pll1_div2_clk,	pll1_clk,		div2);
-SH_FIXED_RATIO_CLK(pll1_div7_clk,	pll1_clk,		div7);
-SH_FIXED_RATIO_CLK(pll1_div13_clk,	pll1_clk,		div13);
-
-/* External input clock */
-struct clk sh73a0_extcki_clk = {
-};
-
-struct clk sh73a0_extalr_clk = {
-};
-
-static struct clk *main_clks[] = {
-	&r_clk,
-	&sh73a0_extal1_clk,
-	&sh73a0_extal2_clk,
-	&extal1_div2_clk,
-	&extal2_div2_clk,
-	&main_clk,
-	&main_div2_clk,
-	&pll0_clk,
-	&pll1_clk,
-	&pll2_clk,
-	&pll3_clk,
-	&pll1_div2_clk,
-	&pll1_div7_clk,
-	&pll1_div13_clk,
-	&sh73a0_extcki_clk,
-	&sh73a0_extalr_clk,
-};
-
-static int frqcr_kick(void)
-{
-	int i;
-
-	/* set KICK bit in FRQCRB to update hardware setting, check success */
-	__raw_writel(__raw_readl(FRQCRB) | (1 << 31), FRQCRB);
-	for (i = 1000; i; i--)
-		if (__raw_readl(FRQCRB) & (1 << 31))
-			cpu_relax();
-		else
-			return i;
-
-	return -ETIMEDOUT;
-}
-
-static void div4_kick(struct clk *clk)
-{
-	frqcr_kick();
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 0, 36, 48, 7 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
-	DIV4_Z, DIV4_ZX, DIV4_HP, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
-	SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT),
-	/*
-	 * ZG clock is dividing PLL0 frequency to supply SGX. Make sure not to
-	 * exceed maximum frequencies of 201.5MHz for VDD_DVFS=1.175 and
-	 * 239.2MHz for VDD_DVFS=1.315V.
-	 */
-	[DIV4_ZG] = SH_CLK_DIV4(&pll0_clk, FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
-	[DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0),
-	[DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0),
-	[DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0),
-	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0),
-	[DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0),
-};
-
-static unsigned long twd_recalc(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 4;
-}
-
-static struct sh_clk_ops twd_clk_ops = {
-	.recalc = twd_recalc,
-};
-
-static struct clk twd_clk = {
-	.parent = &div4_clks[DIV4_Z],
-	.ops = &twd_clk_ops,
-};
-
-static struct sh_clk_ops zclk_ops, kicker_ops;
-static const struct sh_clk_ops *div4_clk_ops;
-
-static int zclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (!clk->parent || !__clk_get(clk->parent))
-		return -ENODEV;
-
-	if (readl(FRQCRB) & (1 << 31))
-		return -EBUSY;
-
-	if (rate == clk_get_rate(clk->parent)) {
-		/* 1:1 - switch off divider */
-		__raw_writel(__raw_readl(FRQCRB) & ~(1 << 28), FRQCRB);
-		/* nullify the divider to prepare for the next time */
-		ret = div4_clk_ops->set_rate(clk, rate / 2);
-		if (!ret)
-			ret = frqcr_kick();
-		if (ret > 0)
-			ret = 0;
-	} else {
-		/* Enable the divider */
-		__raw_writel(__raw_readl(FRQCRB) | (1 << 28), FRQCRB);
-
-		ret = frqcr_kick();
-		if (ret >= 0)
-			/*
-			 * set the divider - call the DIV4 method, it will kick
-			 * FRQCRB too
-			 */
-			ret = div4_clk_ops->set_rate(clk, rate);
-		if (ret < 0)
-			goto esetrate;
-	}
-
-esetrate:
-	__clk_put(clk->parent);
-	return ret;
-}
-
-static long zclk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long div_freq = div4_clk_ops->round_rate(clk, rate),
-		parent_freq = clk_get_rate(clk->parent);
-
-	if (rate > div_freq && abs(parent_freq - rate) < rate - div_freq)
-		return parent_freq;
-
-	return div_freq;
-}
-
-static unsigned long zclk_recalc(struct clk *clk)
-{
-	/*
-	 * Must recalculate frequencies in case PLL0 has been changed, even if
-	 * the divisor is unused ATM!
-	 */
-	unsigned long div_freq = div4_clk_ops->recalc(clk);
-
-	if (__raw_readl(FRQCRB) & (1 << 28))
-		return div_freq;
-
-	return clk_get_rate(clk->parent);
-}
-
-static int kicker_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (__raw_readl(FRQCRB) & (1 << 31))
-		return -EBUSY;
-
-	return div4_clk_ops->set_rate(clk, rate);
-}
-
-static void div4_clk_extend(void)
-{
-	int i;
-
-	div4_clk_ops = div4_clks[0].ops;
-
-	/* Add a kicker-busy check before changing the rate */
-	kicker_ops = *div4_clk_ops;
-	/* We extend the DIV4 clock with a 1:1 pass-through case */
-	zclk_ops = *div4_clk_ops;
-
-	kicker_ops.set_rate = kicker_set_rate;
-	zclk_ops.set_rate = zclk_set_rate;
-	zclk_ops.round_rate = zclk_round_rate;
-	zclk_ops.recalc = zclk_recalc;
-
-	for (i = 0; i < DIV4_NR; i++)
-		div4_clks[i].ops = i == DIV4_Z ? &zclk_ops : &kicker_ops;
-}
-
-enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
-	DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
-	DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
-	DIV6_SPUA, DIV6_SPUV, DIV6_MSU,
-	DIV6_HSI,  DIV6_MFG1, DIV6_MFG2,
-	DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
-	DIV6_NR };
-
-static struct clk *vck_parent[8] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &sh73a0_extcki_clk,
-	[3] = &sh73a0_extal2_clk,
-	[4] = &main_div2_clk,
-	[5] = &sh73a0_extalr_clk,
-	[6] = &main_clk,
-};
-
-static struct clk *pll_parent[4] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &pll1_div13_clk,
-};
-
-static struct clk *hsi_parent[4] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &pll1_div7_clk,
-};
-
-static struct clk *pll_extal2_parent[] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &sh73a0_extal2_clk,
-	[3] = &sh73a0_extal2_clk,
-};
-
-static struct clk *dsi_parent[8] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &main_clk,
-	[3] = &sh73a0_extal2_clk,
-	[4] = &sh73a0_extcki_clk,
-};
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_VCK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_VCK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_VCK3] = SH_CLK_DIV6_EXT(VCLKCR3, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_FLCTL] = SH_CLK_DIV6_EXT(FLCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_SDHI0] = SH_CLK_DIV6_EXT(SD0CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_SDHI1] = SH_CLK_DIV6_EXT(SD1CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_SDHI2] = SH_CLK_DIV6_EXT(SD2CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
-	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
-	[DIV6_SUB] = SH_CLK_DIV6_EXT(SUBCKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_SPUA] = SH_CLK_DIV6_EXT(SPUACKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_SPUV] = SH_CLK_DIV6_EXT(SPUVCKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_MSU] = SH_CLK_DIV6_EXT(MSUCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_HSI] = SH_CLK_DIV6_EXT(HSICKCR, 0,
-			hsi_parent, ARRAY_SIZE(hsi_parent), 6, 2),
-	[DIV6_MFG1] = SH_CLK_DIV6_EXT(MFCK1CR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_MFG2] = SH_CLK_DIV6_EXT(MFCK2CR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_DSIT] = SH_CLK_DIV6_EXT(DSITCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_DSI0P] = SH_CLK_DIV6_EXT(DSI0PCKCR, 0,
-			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
-	[DIV6_DSI1P] = SH_CLK_DIV6_EXT(DSI1PCKCR, 0,
-			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
-};
-
-/* DSI DIV */
-static unsigned long dsiphy_recalc(struct clk *clk)
-{
-	u32 value;
-
-	value = __raw_readl(clk->mapping->base);
-
-	/* FIXME */
-	if (!(value & 0x000B8000))
-		return clk->parent->rate;
-
-	value &= 0x3f;
-	value += 1;
-
-	if ((value < 12) ||
-	    (value > 33)) {
-		pr_err("DSIPHY has wrong value (%d)", value);
-		return 0;
-	}
-
-	return clk->parent->rate / value;
-}
-
-static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_rate_mult_range_round(clk, 12, 33, rate);
-}
-
-static void dsiphy_disable(struct clk *clk)
-{
-	u32 value;
-
-	value = __raw_readl(clk->mapping->base);
-	value &= ~0x000B8000;
-
-	__raw_writel(value , clk->mapping->base);
-}
-
-static int dsiphy_enable(struct clk *clk)
-{
-	u32 value;
-	int multi;
-
-	value = __raw_readl(clk->mapping->base);
-	multi = (value & 0x3f) + 1;
-
-	if ((multi < 12) || (multi > 33))
-		return -EIO;
-
-	__raw_writel(value | 0x000B8000, clk->mapping->base);
-
-	return 0;
-}
-
-static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 value;
-	int idx;
-
-	idx = rate / clk->parent->rate;
-	if ((idx < 12) || (idx > 33))
-		return -EINVAL;
-
-	idx += -1;
-
-	value = __raw_readl(clk->mapping->base);
-	value = (value & ~0x3f) + idx;
-
-	__raw_writel(value, clk->mapping->base);
-
-	return 0;
-}
-
-static struct sh_clk_ops dsiphy_clk_ops = {
-	.recalc		= dsiphy_recalc,
-	.round_rate	= dsiphy_round_rate,
-	.set_rate	= dsiphy_set_rate,
-	.enable		= dsiphy_enable,
-	.disable	= dsiphy_disable,
-};
-
-static struct clk_mapping dsi0phy_clk_mapping = {
-	.phys	= DSI0PHYCR,
-	.len	= 4,
-};
-
-static struct clk_mapping dsi1phy_clk_mapping = {
-	.phys	= DSI1PHYCR,
-	.len	= 4,
-};
-
-static struct clk dsi0phy_clk = {
-	.ops		= &dsiphy_clk_ops,
-	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
-	.mapping	= &dsi0phy_clk_mapping,
-};
-
-static struct clk dsi1phy_clk = {
-	.ops		= &dsiphy_clk_ops,
-	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
-	.mapping	= &dsi1phy_clk_mapping,
-};
-
-static struct clk *late_main_clks[] = {
-	&dsi0phy_clk,
-	&dsi1phy_clk,
-	&twd_clk,
-};
-
-enum { MSTP001,
-	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP112, MSTP100,
-	MSTP219, MSTP218, MSTP217,
-	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-	MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322,
-	MSTP314, MSTP313, MSTP312, MSTP311,
-	MSTP304, MSTP303, MSTP302, MSTP301, MSTP300,
-	MSTP411, MSTP410, MSTP403,
-	MSTP508,
-	MSTP_NR };
-
-#define MSTP(_parent, _reg, _bit, _flags) \
-	SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
-	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* CEU1 */
-	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* CSI2-RX1 */
-	[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU0 */
-	[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2-RX0 */
-	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
-	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
-	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP112] = MSTP(&div4_clks[DIV4_ZG], SMSTPCR1, 12, 0), /* SGX */
-	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
-	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
-	[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
-	[MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* MP-DMAC */
-	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
-	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
-	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
-	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
-	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
-	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
-	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
-	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /*FSI*/
-	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
-	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP322] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 22, 0), /* USB */
-	[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
-	[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
-	[MSTP304] = MSTP(&main_div2_clk, SMSTPCR3, 4, 0), /* TPU0 */
-	[MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
-	[MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
-	[MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
-	[MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
-	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
-	[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
-	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
-	[MSTP508] = MSTP(&div4_clks[DIV4_HP], SMSTPCR5, 8, 0), /* INTCA0 */
-};
-
-/* The lookups structure below includes duplicate entries for some clocks
- * with alternate names.
- * - The traditional name used when a device is initialised with platform data
- * - The name used when a device is initialised using device tree
- * The longer-term aim is to remove these duplicates, and indeed the
- * lookups table entirely, by describing clocks using device tree.
- */
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("r_clk", &r_clk),
-	CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
-
-	/* DIV4 clocks */
-	CLKDEV_DEV_ID("cpu0", &div4_clks[DIV4_Z]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
-	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
-	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
-	CLKDEV_CON_ID("sdhi0_clk", &div6_clks[DIV6_SDHI0]),
-	CLKDEV_CON_ID("sdhi1_clk", &div6_clks[DIV6_SDHI1]),
-	CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
-	CLKDEV_DEV_ID("e6824000.i2c", &mstp_clks[MSTP001]), /* I2C2 */
-	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
-	CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
-	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
-	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */
-	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
-	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
-	CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
-	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
-	CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP219]), /* SCIFA7 */
-	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
-	CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* MP-DMAC */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
-	CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
-	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
-	CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
-	CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]), /* SCIFA1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
-	CLKDEV_DEV_ID("e6c60000.serial", &mstp_clks[MSTP202]), /* SCIFA2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
-	CLKDEV_DEV_ID("e6c70000.serial", &mstp_clks[MSTP201]), /* SCIFA3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("e6c80000.serial", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
-	CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP331]), /* SCIFA6 */
-	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
-	CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
-	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
-	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
-	CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
-	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
-	CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
-	CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
-	CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), /* MMCIF0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
-	CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP311]), /* SDHI2 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.3", &mstp_clks[MSTP301]), /* TPU3 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.4", &mstp_clks[MSTP300]), /* TPU4 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
-	CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
-	CLKDEV_DEV_ID("e6828000.i2c", &mstp_clks[MSTP410]), /* I2C4 */
-	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.0",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e6900000.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.1",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e6900004.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.2",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e6900008.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.3",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e690000c.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-
-	/* ICK */
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
-	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
-	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
-	CLKDEV_ICK_ID("fck", "sh-cmt-48.1", &mstp_clks[MSTP329]), /* CMT1 */
-	CLKDEV_ICK_ID("fck", "e6138000.timer", &mstp_clks[MSTP329]), /* CMT1 */
-	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */
-};
-
-void __init sh73a0_clock_init(void)
-{
-	int k, ret = 0;
-
-	/* Set SDHI clocks to a known state */
-	__raw_writel(0x108, SD0CKCR);
-	__raw_writel(0x108, SD1CKCR);
-	__raw_writel(0x108, SD2CKCR);
-
-	/* detect main clock parent */
-	switch ((__raw_readl(CKSCR) >> 28) & 0x03) {
-	case 0:
-		main_clk.parent = &sh73a0_extal1_clk;
-		break;
-	case 1:
-		main_clk.parent = &extal1_div2_clk;
-		break;
-	case 2:
-		main_clk.parent = &sh73a0_extal2_clk;
-		break;
-	case 3:
-		main_clk.parent = &extal2_div2_clk;
-		break;
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret) {
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-		if (!ret)
-			div4_clk_extend();
-	}
-
-	if (!ret)
-		ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup sh73a0 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
deleted file mode 100644
index 68c2d06d0..000000000
--- a/arch/arm/mach-shmobile/clock.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * SH-Mobile Clock Framework
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sh_clk.h>
-
-#include "clock.h"
-#include "common.h"
-
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
-{
-	struct clk_ratio *p = clk->priv;
-
-	return clk->parent->rate / p->div * p->mul;
-};
-
-struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
-	.recalc	= shmobile_fixed_ratio_clk_recalc,
-};
-
-int __init shmobile_clk_init(void)
-{
-	/* Kick the child clocks.. */
-	recalculate_root_clocks();
-
-	/* Enable the necessary init clocks */
-	clk_enable_init_clocks();
-
-	return 0;
-}
diff --git a/arch/arm/mach-shmobile/clock.h b/arch/arm/mach-shmobile/clock.h
deleted file mode 100644
index cf3552ea1..000000000
--- a/arch/arm/mach-shmobile/clock.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef CLOCK_H
-#define CLOCK_H
-
-/* legacy clock implementation */
-
-struct clk;
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
-extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
-
-/* clock ratio */
-struct clk_ratio {
-	int mul;
-	int div;
-};
-
-#define SH_CLK_RATIO(name, m, d)		\
-static struct clk_ratio name ##_ratio = {	\
-	.mul = m,				\
-	.div = d,				\
-}
-
-#define SH_FIXED_RATIO_CLKg(name, p, r)	\
-struct clk name = {			\
-	.parent	= &p,				\
-	.ops	= &shmobile_fixed_ratio_clk_ops,\
-	.priv	= &r ## _ratio,			\
-}
-
-#define SH_FIXED_RATIO_CLK(name, p, r)		\
-static SH_FIXED_RATIO_CLKg(name, p, r)
-
-#define SH_FIXED_RATIO_CLK_SET(name, p, m, d)	\
-	SH_CLK_RATIO(name, m, d);		\
-	SH_FIXED_RATIO_CLK(name, p, name)
-
-#define SH_CLK_SET_RATIO(p, m, d)	\
-do {			\
-	(p)->mul = m;	\
-	(p)->div = d;	\
-} while (0)
-
-#endif
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 476092b86..1a8f7b3ab 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -1,25 +1,21 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
-extern void shmobile_earlytimer_init(void);
 extern void shmobile_init_delay(void);
-struct twd_local_timer;
-extern void shmobile_setup_console(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
-extern unsigned long shmobile_boot_arg;
 extern unsigned long shmobile_boot_size;
 extern void shmobile_smp_boot(void);
 extern void shmobile_smp_sleep(void);
 extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
 			      unsigned long arg);
-extern int shmobile_smp_cpu_disable(unsigned int cpu);
+extern bool shmobile_smp_cpu_can_disable(unsigned int cpu);
+extern bool shmobile_smp_init_fallback_ops(void);
 extern void shmobile_boot_scu(void);
-extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
+extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys,
+					  unsigned int max_cpus);
 extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
 extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
-struct clk;
-extern int shmobile_clk_init(void);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 
 #ifdef CONFIG_SUSPEND
@@ -30,18 +26,9 @@ static inline int shmobile_suspend_init(void) { return 0; }
 static inline void shmobile_smp_apmu_suspend_init(void) { }
 #endif
 
-#ifdef CONFIG_CPU_FREQ
-int shmobile_cpufreq_init(void);
-#else
-static inline int shmobile_cpufreq_init(void) { return 0; }
-#endif
-
-extern void __iomem *shmobile_scu_base;
-
 static inline void __init shmobile_init_late(void)
 {
 	shmobile_suspend_init();
-	shmobile_cpufreq_init();
 }
 
 #endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c
deleted file mode 100644
index 57fbff024..000000000
--- a/arch/arm/mach-shmobile/cpufreq.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * CPUFreq support code for SH-Mobile ARM
- *
- *  Copyright (C) 2014 Gaku Inami
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/platform_device.h>
-
-int __init shmobile_cpufreq_init(void)
-{
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-	return 0;
-}
diff --git a/arch/arm/mach-shmobile/dma-register.h b/arch/arm/mach-shmobile/dma-register.h
deleted file mode 100644
index 52a2f66e6..000000000
--- a/arch/arm/mach-shmobile/dma-register.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * SH-ARM CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2012 Renesas Solutions Corp
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * Based on arch/sh/include/cpu-sh4/cpu/dma-register.h
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef DMA_REGISTER_H
-#define DMA_REGISTER_H
-
-/*
- *		Direct Memory Access Controller
- */
-
-/* Transmit sizes and respective CHCR register values */
-enum {
-	XMIT_SZ_8BIT		= 0,
-	XMIT_SZ_16BIT		= 1,
-	XMIT_SZ_32BIT		= 2,
-	XMIT_SZ_64BIT		= 7,
-	XMIT_SZ_128BIT		= 3,
-	XMIT_SZ_256BIT		= 4,
-	XMIT_SZ_512BIT		= 5,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-static const unsigned int dma_ts_shift[] = {
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_64BIT]		= 3,
-	[XMIT_SZ_128BIT]	= 4,
-	[XMIT_SZ_256BIT]	= 5,
-	[XMIT_SZ_512BIT]	= 6,
-};
-
-#define TS_LOW_BIT	0x3 /* --xx */
-#define TS_HI_BIT	0xc /* xx-- */
-
-#define TS_LOW_SHIFT	(3)
-#define TS_HI_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
-
-#define TS_INDEX2VAL(i) \
-	((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
-	 (((i) & TS_HI_BIT)  << TS_HI_SHIFT))
-
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL((xmit_sz)))
-
-
-/*
- *		USB High-Speed DMAC
- */
-/* Transmit sizes and respective CHCR register values */
-enum {
-	USBTS_XMIT_SZ_8BYTE		= 0,
-	USBTS_XMIT_SZ_16BYTE		= 1,
-	USBTS_XMIT_SZ_32BYTE		= 2,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-static const unsigned int dma_usbts_shift[] = {
-	[USBTS_XMIT_SZ_8BYTE]	= 3,
-	[USBTS_XMIT_SZ_16BYTE]	= 4,
-	[USBTS_XMIT_SZ_32BYTE]	= 5,
-};
-
-#define USBTS_LOW_BIT	0x3 /* --xx */
-#define USBTS_HI_BIT	0x0 /* ---- */
-
-#define USBTS_LOW_SHIFT	6
-#define USBTS_HI_SHIFT	0
-
-#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
-
-#endif /* DMA_REGISTER_H */
diff --git a/arch/arm/mach-shmobile/emev2.h b/arch/arm/mach-shmobile/emev2.h
new file mode 100644
index 000000000..916d25f67
--- /dev/null
+++ b/arch/arm/mach-shmobile/emev2.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_EMEV2_H__
+#define __ASM_EMEV2_H__
+
+extern const struct smp_operations emev2_smp_ops;
+
+#endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index fa5248c52..936d7011c 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -27,7 +27,7 @@
  */
 ENTRY(shmobile_boot_scu)
 					@ r0 = SCU base address
-	mrc     p15, 0, r1, c0, c0, 5	@ read MIPDR
+	mrc     p15, 0, r1, c0, c0, 5	@ read MPIDR
 	and	r1, r1, #3		@ mask out cpu ID
 	lsl	r1, r1, #3		@ we will shift by cpu_id * 8 bits
 	ldr	r2, [r0, #8]		@ SCU Power Status Register
@@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu)
 
 	b	secondary_startup
 ENDPROC(shmobile_boot_scu)
-
-	.text
-	.align	2
-	.globl	shmobile_scu_base
-shmobile_scu_base:
-	.space	4
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 330c1fc63..32e0bf6e3 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -24,7 +24,6 @@
 	.arm
 	.align  12
 ENTRY(shmobile_boot_vector)
-	ldr     r0, 2f
 	ldr     r1, 1f
 	bx	r1
 
@@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector)
 	.globl	shmobile_boot_fn
 shmobile_boot_fn:
 1:	.space	4
-	.globl	shmobile_boot_arg
-shmobile_boot_arg:
-2:	.space	4
 	.globl	shmobile_boot_size
 shmobile_boot_size:
 	.long	. - shmobile_boot_vector
@@ -46,13 +42,15 @@ shmobile_boot_size:
  */
 
 ENTRY(shmobile_smp_boot)
-						@ r0 = MPIDR_HWID_BITMASK
 	mrc	p15, 0, r1, c0, c0, 5		@ r1 = MPIDR
-	and	r0, r1, r0			@ r0 = cpu_logical_map() value
+	and	r0, r1, #0xffffff		@ MPIDR_HWID_BITMASK
+						@ r0 = cpu_logical_map() value
 	mov	r1, #0				@ r1 = CPU index
-	adr	r5, 1f				@ array of per-cpu mpidr values
-	adr	r6, 2f				@ array of per-cpu functions
-	adr	r7, 3f				@ array of per-cpu arguments
+	adr	r2, 1f
+	ldmia	r2, {r5, r6, r7}
+	add	r5, r5, r2			@ array of per-cpu mpidr values
+	add	r6, r6, r2			@ array of per-cpu functions
+	add	r7, r7, r2			@ array of per-cpu arguments
 
 shmobile_smp_boot_find_mpidr:
 	ldr	r8, [r5, r1, lsl #2]
@@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep)
 	b	shmobile_smp_boot
 ENDPROC(shmobile_smp_sleep)
 
+	.align	2
+1:	.long	shmobile_smp_mpidr - .
+	.long	shmobile_smp_fn - 1b
+	.long	shmobile_smp_arg - 1b
+
+	.bss
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
-1:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
 	.globl	shmobile_smp_fn
 shmobile_smp_fn:
-2:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
 	.globl	shmobile_smp_arg
 shmobile_smp_arg:
-3:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
diff --git a/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt b/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
deleted file mode 100644
index 9531f46a8..000000000
--- a/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
+++ /dev/null
@@ -1,410 +0,0 @@
-LIST "KZM9G low-level initialization routine."
-LIST "Adapted from u-boot KZM9G support code."
-
-LIST "Copyright (C) 2013 Ulrich Hecht"
-
-LIST "This program is free software; you can redistribute it and/or modify"
-LIST "it under the terms of the GNU General Public License version 2 as"
-LIST "published by the Free Software Foundation."
-
-LIST "This program is distributed in the hope that it will be useful,"
-LIST "but WITHOUT ANY WARRANTY; without even the implied warranty of"
-LIST "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the"
-LIST "GNU General Public License for more details."
-
-
-LIST "Register definitions:"
-
-LIST "Secure control register"
-#define LIFEC_SEC_SRC (0xE6110008)
-
-LIST "RWDT"
-#define RWDT_BASE   (0xE6020000)
-#define RWTCSRA0 (RWDT_BASE + 0x04)
-
-LIST "HPB Semaphore Control Registers"
-#define HPBSCR_BASE (0xE6000000)
-#define HPBCTRL6 (HPBSCR_BASE + 0x1030)
-
-#define SBSC1_BASE  (0xFE400000)
-#define SDCR0A		(SBSC1_BASE + 0x0008)
-#define SDCR1A		(SBSC1_BASE + 0x000C)
-#define SDPCRA		(SBSC1_BASE + 0x0010)
-#define SDCR0SA		(SBSC1_BASE + 0x0018)
-#define SDCR1SA		(SBSC1_BASE + 0x001C)
-#define RTCSRA		(SBSC1_BASE + 0x0020)
-#define RTCORA		(SBSC1_BASE + 0x0028)
-#define RTCORHA		(SBSC1_BASE + 0x002C)
-#define SDWCRC0A	(SBSC1_BASE + 0x0040)
-#define SDWCRC1A	(SBSC1_BASE + 0x0044)
-#define SDWCR00A	(SBSC1_BASE + 0x0048)
-#define SDWCR01A	(SBSC1_BASE + 0x004C)
-#define SDWCR10A	(SBSC1_BASE + 0x0050)
-#define SDWCR11A	(SBSC1_BASE + 0x0054)
-#define SDWCR2A		(SBSC1_BASE + 0x0060)
-#define SDWCRC2A	(SBSC1_BASE + 0x0064)
-#define ZQCCRA		(SBSC1_BASE + 0x0068)
-#define SDMRACR0A	(SBSC1_BASE + 0x0084)
-#define SDMRTMPCRA	(SBSC1_BASE + 0x008C)
-#define SDMRTMPMSKA	(SBSC1_BASE + 0x0094)
-#define SDGENCNTA	(SBSC1_BASE + 0x009C)
-#define SDDRVCR0A	(SBSC1_BASE + 0x00B4)
-#define DLLCNT0A	(SBSC1_BASE + 0x0354)
-
-#define SDMRA1  (0xFE500000)
-#define SDMRA2  (0xFE5C0000)
-#define SDMRA3  (0xFE504000)
-
-#define SBSC2_BASE  (0xFB400000)
-#define SDCR0B		(SBSC2_BASE + 0x0008)
-#define SDCR1B		(SBSC2_BASE + 0x000C)
-#define SDPCRB		(SBSC2_BASE + 0x0010)
-#define SDCR0SB		(SBSC2_BASE + 0x0018)
-#define SDCR1SB		(SBSC2_BASE + 0x001C)
-#define RTCSRB		(SBSC2_BASE + 0x0020)
-#define RTCORB		(SBSC2_BASE + 0x0028)
-#define RTCORHB		(SBSC2_BASE + 0x002C)
-#define SDWCRC0B	(SBSC2_BASE + 0x0040)
-#define SDWCRC1B	(SBSC2_BASE + 0x0044)
-#define SDWCR00B	(SBSC2_BASE + 0x0048)
-#define SDWCR01B	(SBSC2_BASE + 0x004C)
-#define SDWCR10B	(SBSC2_BASE + 0x0050)
-#define SDWCR11B	(SBSC2_BASE + 0x0054)
-#define SDPDCR0B	(SBSC2_BASE + 0x0058)
-#define SDWCR2B		(SBSC2_BASE + 0x0060)
-#define SDWCRC2B	(SBSC2_BASE + 0x0064)
-#define ZQCCRB		(SBSC2_BASE + 0x0068)
-#define SDMRACR0B	(SBSC2_BASE + 0x0084)
-#define SDMRTMPCRB	(SBSC2_BASE + 0x008C)
-#define SDMRTMPMSKB	(SBSC2_BASE + 0x0094)
-#define SDGENCNTB	(SBSC2_BASE + 0x009C)
-#define DPHYCNT0B	(SBSC2_BASE + 0x00A0)
-#define DPHYCNT1B	(SBSC2_BASE + 0x00A4)
-#define DPHYCNT2B	(SBSC2_BASE + 0x00A8)
-#define SDDRVCR0B	(SBSC2_BASE + 0x00B4)
-#define DLLCNT0B	(SBSC2_BASE + 0x0354)
-
-#define SDMRB1  (0xFB500000)
-#define SDMRB2  (0xFB5C0000)
-#define SDMRB3  (0xFB504000)
-
-#define CPG_BASE   (0xE6150000)
-#define FRQCRA		(CPG_BASE + 0x0000)
-#define FRQCRB		(CPG_BASE + 0x0004)
-#define FRQCRD		(CPG_BASE + 0x00E4)
-#define VCLKCR1		(CPG_BASE + 0x0008)
-#define VCLKCR2		(CPG_BASE + 0x000C)
-#define VCLKCR3		(CPG_BASE + 0x001C)
-#define ZBCKCR		(CPG_BASE + 0x0010)
-#define FLCKCR		(CPG_BASE + 0x0014)
-#define SD0CKCR		(CPG_BASE + 0x0074)
-#define SD1CKCR		(CPG_BASE + 0x0078)
-#define SD2CKCR		(CPG_BASE + 0x007C)
-#define FSIACKCR	(CPG_BASE + 0x0018)
-#define SUBCKCR		(CPG_BASE + 0x0080)
-#define SPUACKCR	(CPG_BASE + 0x0084)
-#define SPUVCKCR	(CPG_BASE + 0x0094)
-#define MSUCKCR		(CPG_BASE + 0x0088)
-#define HSICKCR		(CPG_BASE + 0x008C)
-#define FSIBCKCR	(CPG_BASE + 0x0090)
-#define MFCK1CR		(CPG_BASE + 0x0098)
-#define MFCK2CR		(CPG_BASE + 0x009C)
-#define DSITCKCR	(CPG_BASE + 0x0060)
-#define DSI0PCKCR	(CPG_BASE + 0x0064)
-#define DSI1PCKCR	(CPG_BASE + 0x0068)
-#define DSI0PHYCR	(CPG_BASE + 0x006C)
-#define DVFSCR3		(CPG_BASE + 0x0174)
-#define DVFSCR4		(CPG_BASE + 0x0178)
-#define DVFSCR5		(CPG_BASE + 0x017C)
-#define MPMODE		(CPG_BASE + 0x00CC)
-
-#define PLLECR		(CPG_BASE + 0x00D0)
-#define PLL0CR		(CPG_BASE + 0x00D8)
-#define PLL1CR		(CPG_BASE + 0x0028)
-#define PLL2CR		(CPG_BASE + 0x002C)
-#define PLL3CR		(CPG_BASE + 0x00DC)
-#define PLL0STPCR	(CPG_BASE + 0x00F0)
-#define PLL1STPCR	(CPG_BASE + 0x00C8)
-#define PLL2STPCR	(CPG_BASE + 0x00F8)
-#define PLL3STPCR	(CPG_BASE + 0x00FC)
-#define RMSTPCR0	(CPG_BASE + 0x0110)
-#define RMSTPCR1	(CPG_BASE + 0x0114)
-#define RMSTPCR2	(CPG_BASE + 0x0118)
-#define RMSTPCR3	(CPG_BASE + 0x011C)
-#define RMSTPCR4	(CPG_BASE + 0x0120)
-#define RMSTPCR5	(CPG_BASE + 0x0124)
-#define SMSTPCR0	(CPG_BASE + 0x0130)
-#define SMSTPCR2	(CPG_BASE + 0x0138)
-#define SMSTPCR3	(CPG_BASE + 0x013C)
-#define CPGXXCR4	(CPG_BASE + 0x0150)
-#define SRCR0		(CPG_BASE + 0x80A0)
-#define SRCR2		(CPG_BASE + 0x80B0)
-#define SRCR3		(CPG_BASE + 0x80A8)
-#define VREFCR		(CPG_BASE + 0x00EC)
-#define PCLKCR		(CPG_BASE + 0x1020)
-
-#define PORT32CR (0xE6051020)
-#define PORT33CR (0xE6051021)
-#define PORT34CR (0xE6051022)
-#define PORT35CR (0xE6051023)
-
-LIST "DRAM initialization code:"
-
-EW RWTCSRA0, 0xA507
-
-ED_AND LIFEC_SEC_SRC, 0xFFFF7FFF
-
-ED_AND SMSTPCR3,0xFFFF7FFF
-ED_AND SRCR3, 0xFFFF7FFF
-ED_AND SMSTPCR2,0xFFFBFFFF
-ED_AND SRCR2, 0xFFFBFFFF
-ED PLLECR, 0x00000000
-
-WAIT_MASK PLLECR, 0x00000F00, 0x00000000
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-
-ED PLL0CR, 0x2D000000
-ED PLL1CR, 0x17100000
-ED FRQCRB, 0x96235880
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-
-ED FLCKCR, 0x0000000B
-ED_AND SMSTPCR0, 0xFFFFFFFD
-
-ED_AND SRCR0, 0xFFFFFFFD
-ED 0xE6001628, 0x514
-ED 0xE6001648, 0x514
-ED 0xE6001658, 0x514
-ED 0xE6001678, 0x514
-
-ED DVFSCR4, 0x00092000
-ED DVFSCR5, 0x000000DC
-ED PLLECR, 0x00000000
-WAIT_MASK PLLECR, 0x00000F00, 0x00000000
-
-ED FRQCRA, 0x0012453C
-ED FRQCRB, 0x80431350
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-ED FRQCRD, 0x00000B0B
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-
-ED PCLKCR, 0x00000003
-ED VCLKCR1, 0x0000012F
-ED VCLKCR2, 0x00000119
-ED VCLKCR3, 0x00000119
-ED ZBCKCR, 0x00000002
-ED FLCKCR, 0x00000005
-ED SD0CKCR, 0x00000080
-ED SD1CKCR, 0x00000080
-ED SD2CKCR, 0x00000080
-ED FSIACKCR, 0x0000003F
-ED FSIBCKCR, 0x0000003F
-ED SUBCKCR, 0x00000080
-ED SPUACKCR, 0x0000000B
-ED SPUVCKCR, 0x0000000B
-ED MSUCKCR, 0x0000013F
-ED HSICKCR, 0x00000080
-ED MFCK1CR, 0x0000003F
-ED MFCK2CR, 0x0000003F
-ED DSITCKCR, 0x00000107
-ED DSI0PCKCR, 0x00000313
-ED DSI1PCKCR, 0x0000130D
-ED DSI0PHYCR, 0x2A800E0E
-ED PLL0CR, 0x1E000000
-ED PLL0CR, 0x2D000000
-ED PLL1CR, 0x17100000
-ED PLL2CR, 0x27000080
-ED PLL3CR, 0x1D000000
-ED PLL0STPCR, 0x00080000
-ED PLL1STPCR, 0x000120C0
-ED PLL2STPCR, 0x00012000
-ED PLL3STPCR, 0x00000030
-ED PLLECR, 0x0000000B
-WAIT_MASK PLLECR, 0x00000B00, 0x00000B00
-
-ED DVFSCR3, 0x000120F0
-ED MPMODE, 0x00000020
-ED VREFCR, 0x0000028A
-ED RMSTPCR0, 0xE4628087
-ED RMSTPCR1, 0xFFFFFFFF
-ED RMSTPCR2, 0x53FFFFFF
-ED RMSTPCR3, 0xFFFFFFFF
-ED RMSTPCR4, 0x00800D3D
-ED RMSTPCR5, 0xFFFFF3FF
-ED SMSTPCR2, 0x00000000
-ED SRCR2,  0x00040000
-ED_AND PLLECR, 0xFFFFFFF7
-WAIT_MASK PLLECR, 0x00000800, 0x00000000
-
-LIST "set SBSC operational"
-ED HPBCTRL6, 0x00000001
-WAIT_MASK HPBCTRL6, 0x00000001, 0x00000001
-
-LIST "set SBSC operating frequency"
-ED FRQCRD, 0x00001414
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-ED PLL3CR, 0x1D000000
-ED_OR PLLECR, 0x00000008
-WAIT_MASK PLLECR, 0x00000800, 0x00000800
-
-LIST "enable DLL oscillation in DDRPHY"
-ED_OR DLLCNT0A, 0x00000002
-
-LIST "wait >= 100 ns"
-ED SDGENCNTA, 0x00000005
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "target LPDDR2 device settings"
-ED SDCR0A, 0xACC90159
-ED SDCR1A, 0x00010059
-ED SDWCRC0A, 0x50874114
-ED SDWCRC1A, 0x33199B37
-ED SDWCRC2A, 0x008F2313
-ED SDWCR00A, 0x31020707
-ED SDWCR01A, 0x0017040A
-ED SDWCR10A, 0x31020707
-ED SDWCR11A, 0x0017040A
-
-ED SDDRVCR0A, 0x055557ff
-
-ED SDWCR2A, 0x30000000
-
-LIST "drive CKE high"
-ED_OR SDPCRA, 0x00000080
-WAIT_MASK SDPCRA, 0x00000080, 0x00000080
-
-LIST "wait >= 200 us"
-ED SDGENCNTA, 0x00002710
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "issue reset command to LPDDR2 device"
-ED SDMRACR0A, 0x0000003F
-ED SDMRA1, 0x00000000
-
-LIST "wait >= 10 (or 1) us (docs inconsistent)"
-ED SDGENCNTA, 0x000001F4
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "MRW ZS initialization calibration command"
-ED SDMRACR0A, 0x0000FF0A
-ED SDMRA3, 0x00000000
-
-LIST "wait >= 1 us"
-ED SDGENCNTA, 0x00000032
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "specify operating mode in LPDDR2"
-ED SDMRACR0A, 0x00002201
-ED SDMRA1, 0x00000000
-ED SDMRACR0A, 0x00000402
-ED SDMRA1, 0x00000000
-ED SDMRACR0A, 0x00000203
-ED SDMRA1, 0x00000000
-
-LIST "initialize DDR interface"
-ED SDMRA2, 0x00000000
-
-LIST "temperature sensor control"
-ED SDMRTMPCRA, 0x88800004
-ED SDMRTMPMSKA,0x00000004
-
-LIST "auto-refreshing control"
-ED RTCORA, 0xA55A0032
-ED RTCORHA, 0xA55A000C
-ED RTCSRA, 0xA55A2048
-
-ED_OR SDCR0A, 0x00000800
-ED_OR SDCR1A, 0x00000400
-
-LIST "auto ZQ calibration control"
-ED ZQCCRA, 0xFFF20000
-
-ED_OR DLLCNT0B, 0x00000002
-ED SDGENCNTB, 0x00000005
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDCR0B, 0xACC90159
-ED SDCR1B, 0x00010059
-ED SDWCRC0B, 0x50874114
-ED SDWCRC1B, 0x33199B37
-ED SDWCRC2B, 0x008F2313
-ED SDWCR00B, 0x31020707
-ED SDWCR01B, 0x0017040A
-ED SDWCR10B, 0x31020707
-ED SDWCR11B, 0x0017040A
-ED SDDRVCR0B, 0x055557ff
-ED SDWCR2B, 0x30000000
-ED_OR SDPCRB, 0x00000080
-WAIT_MASK SDPCRB, 0x00000080, 0x00000080
-
-ED SDGENCNTB, 0x00002710
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-ED SDMRACR0B, 0x0000003F
-
-LIST "upstream u-boot writes to SDMRA1A for both SBSC 1 and 2, which does"
-LIST "not seem to make a lot of sense..."
-ED SDMRB1, 0x00000000
-
-ED SDGENCNTB, 0x000001F4
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDMRACR0B, 0x0000FF0A
-ED SDMRB3, 0x00000000
-ED SDGENCNTB, 0x00000032
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDMRACR0B, 0x00002201
-ED SDMRB1, 0x00000000
-ED SDMRACR0B, 0x00000402
-ED SDMRB1, 0x00000000
-ED SDMRACR0B, 0x00000203
-ED SDMRB1, 0x00000000
-ED SDMRB2, 0x00000000
-ED SDMRTMPCRB, 0x88800004
-ED SDMRTMPMSKB, 0x00000004
-ED RTCORB,  0xA55A0032
-ED RTCORHB, 0xA55A000C
-ED RTCSRB,  0xA55A2048
-ED_OR SDCR0B, 0x00000800
-ED_OR SDCR1B, 0x00000400
-ED ZQCCRB, 0xFFF20000
-ED_OR SDPDCR0B, 0x00030000
-ED DPHYCNT1B, 0xA5390000
-ED DPHYCNT0B, 0x00001200
-ED DPHYCNT1B, 0x07CE0000
-ED DPHYCNT0B, 0x00001247
-WAIT_MASK DPHYCNT2B, 0xFFFFFFFF, 0x07CE0000
-
-ED_AND SDPDCR0B, 0xFFFCFFFF
-
-ED FRQCRD, 0x00000B0B
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-
-ED CPGXXCR4, 0xfffffffc
-
-LIST "Setup SCIF4 / workaround"
-EB PORT32CR, 0x12
-EB PORT33CR, 0x22
-EB PORT34CR, 0x12
-EB PORT35CR, 0x22
-
-EW 0xE6C80000, 0
-EB 0xE6C80004, 0x19
-EW 0xE6C80008, 0x0030
-EW 0xE6C80018, 0
-EW 0xE6C80030, 0x0014
-
-LIST "Magic to avoid hangs and corruption on DRAM writes."
-
-LIST "It has been observed that the system would most often hang while"
-LIST "decompressing the kernel, and if it didn't it would always write"
-LIST "a corrupt image to DRAM."
-LIST "This problem does not occur in u-boot, and the reason is that"
-LIST "u-boot performs an additional cache invalidation after setting up"
-LIST "the DRAM controller. Such an invalidation should not be necessary at"
-LIST "this point, and attempts at removing parts of the routine to arrive"
-LIST "at the minimal snippet of code necessary to avoid the DRAM stability"
-LIST "problem yielded the following:"
-
-MRC p15, 0, r0, c1, c0, 0
-MCR p15, 0, r0, c1, c0, 0
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
deleted file mode 100644
index 5aee83f07..000000000
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */
-
-/* External IRQ pins */
-#define IRQPIN_BASE		2000
-#define irq_pin(nr)		((nr) + IRQPIN_BASE)
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
deleted file mode 100644
index 175ee0546..000000000
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef ZBOOT_H
-#define ZBOOT_H
-
-#include <mach/zboot_macros.h>
-
-/**************************************************
- *
- *		board specific settings
- *
- **************************************************/
-
-#ifdef CONFIG_MACH_KZM9G
-#define MEMORY_START	0x43000000
-#include "mach/head-kzm9g.txt"
-#else
-#error "unsupported board."
-#endif
-
-#endif /* ZBOOT_H */
diff --git a/arch/arm/mach-shmobile/include/mach/zboot_macros.h b/arch/arm/mach-shmobile/include/mach/zboot_macros.h
deleted file mode 100644
index 14fd3d538..000000000
--- a/arch/arm/mach-shmobile/include/mach/zboot_macros.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __ZBOOT_MACRO_H
-#define __ZBOOT_MACRO_H
-
-/* The LIST command is used to include comments in the script */
-.macro	LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro ED, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STR	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro EW, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STRH	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro EB, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STRB	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro  WAIT, time, reg
-	LDR	r1, 1f
-	LDR	r0, 2f
-	STR	r0, [r1]
-10 :
-	LDR	r0, [r1]
-	CMP	r0, #0x00000000
-	BNE	10b
-	NOP
-	B	3f
-1 :	.long	\reg
-2 :	.long	\time * 100
-3 :
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro  DD, start, end
-	LDR	r1, 1f
-	B	2f
-1 :	.long	\start
-2 :
-.endm
-
-/* loop until a given value has been read (with mask) */
-.macro WAIT_MASK, addr, data, cmp
-	LDR	r0, 2f
-	LDR	r1, 3f
-	LDR	r2, 4f
-1:
-	LDR	r3, [r0, #0]
-	AND	r3, r1, r3
-	CMP	r2, r3
-	BNE	1b
-	B	5f
-2:	.long	\addr
-3:	.long	\data
-4:	.long	\cmp
-5:
-.endm
-
-/* read 32-bit value from addr, "or" an immediate and write back */
-.macro ED_OR, addr, data
-	LDR r4, 1f
-	LDR r5, 2f
-	LDR r6, [r4]
-	ORR r5, r6, r5
-	STR r5, [r4]
-	B	3f
-1:	.long	\addr
-2:	.long	\data
-3:
-.endm
-
-/* read 32-bit value from addr, "and" an immediate and write back */
-.macro ED_AND, addr, data
-	LDR r4, 1f
-	LDR r5, 2f
-	LDR r6, [r4]
-	AND r5, r6, r5
-	STR r5, [r4]
-	B	3f
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-#endif /* __ZBOOT_MACRO_H */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
deleted file mode 100644
index fd63ae653..000000000
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * sh73a0 processor support - INTC hardware block
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "intc.h"
-#include "irqs.h"
-#include "sh73a0.h"
-
-enum {
-	UNUSED = 0,
-
-	/* interrupt sources INTCS */
-	PINTCS_PINT1, PINTCS_PINT2,
-	RTDMAC_0_DEI0, RTDMAC_0_DEI1, RTDMAC_0_DEI2, RTDMAC_0_DEI3,
-	CEU, MFI, BBIF2, VPU, TSIF1, _3DG_SGX543, _2DDMAC_2DDM0,
-	RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR,
-	KEYSC_KEY, VINT, MSIOF,
-	TMU0_TUNI00, TMU0_TUNI01, TMU0_TUNI02,
-	CMT0, TSIF0, CMT2, LMB, MSUG, MSU_MSU, MSU_MSU2,
-	CTI, RWDT0, ICB, PEP, ASA, JPU_JPEG, LCDC, LCRC,
-	RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	RTDMAC_3_DEI10, RTDMAC_3_DEI11,
-	FRC, GCU, LCDC1, CSIRX,
-	DSITX0_DSITX00, DSITX0_DSITX01,
-	SPU2_SPU0, SPU2_SPU1, FSI,
-	TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
-	TSIF2, CMT4, MFIS2, CPORTS2R, TSG, DMASCH1, SCUW,
-	VIO60, VIO61, CEU21, CSI21, DSITX1_DSITX10, DSITX1_DSITX11,
-	DISP, DSRV, EMUX2_EMUX20I, EMUX2_EMUX21I,
-	MSTIF0_MST00I, MSTIF0_MST01I, MSTIF1_MST10I, MSTIF1_MST11I,
-	SPUV,
-
-	/* interrupt groups INTCS */
-	RTDMAC_0, RTDMAC_1, RTDMAC_2, RTDMAC_3,
-	DSITX0, SPU2, TMU1, MSU,
-};
-
-static struct intc_vect intcs_vectors[] = {
-	INTCS_VECT(PINTCS_PINT1, 0x0600), INTCS_VECT(PINTCS_PINT2, 0x0620),
-	INTCS_VECT(RTDMAC_0_DEI0, 0x0800), INTCS_VECT(RTDMAC_0_DEI1, 0x0820),
-	INTCS_VECT(RTDMAC_0_DEI2, 0x0840), INTCS_VECT(RTDMAC_0_DEI3, 0x0860),
-	INTCS_VECT(CEU, 0x0880), INTCS_VECT(MFI, 0x0900),
-	INTCS_VECT(BBIF2, 0x0960), INTCS_VECT(VPU, 0x0980),
-	INTCS_VECT(TSIF1, 0x09a0), INTCS_VECT(_3DG_SGX543, 0x09e0),
-	INTCS_VECT(_2DDMAC_2DDM0, 0x0a00),
-	INTCS_VECT(RTDMAC_1_DEI4, 0x0b80), INTCS_VECT(RTDMAC_1_DEI5, 0x0ba0),
-	INTCS_VECT(RTDMAC_1_DADERR, 0x0bc0),
-	INTCS_VECT(KEYSC_KEY, 0x0be0), INTCS_VECT(VINT, 0x0c80),
-	INTCS_VECT(MSIOF, 0x0d20),
-	INTCS_VECT(TMU0_TUNI00, 0x0e80), INTCS_VECT(TMU0_TUNI01, 0x0ea0),
-	INTCS_VECT(TMU0_TUNI02, 0x0ec0),
-	INTCS_VECT(CMT0, 0x0f00), INTCS_VECT(TSIF0, 0x0f20),
-	INTCS_VECT(CMT2, 0x0f40), INTCS_VECT(LMB, 0x0f60),
-	INTCS_VECT(MSUG, 0x0f80),
-	INTCS_VECT(MSU_MSU, 0x0fa0), INTCS_VECT(MSU_MSU2, 0x0fc0),
-	INTCS_VECT(CTI, 0x0400), INTCS_VECT(RWDT0, 0x0440),
-	INTCS_VECT(ICB, 0x0480), INTCS_VECT(PEP, 0x04a0),
-	INTCS_VECT(ASA, 0x04c0), INTCS_VECT(JPU_JPEG, 0x0560),
-	INTCS_VECT(LCDC, 0x0580), INTCS_VECT(LCRC, 0x05a0),
-	INTCS_VECT(RTDMAC_2_DEI6, 0x1300), INTCS_VECT(RTDMAC_2_DEI7, 0x1320),
-	INTCS_VECT(RTDMAC_2_DEI8, 0x1340), INTCS_VECT(RTDMAC_2_DEI9, 0x1360),
-	INTCS_VECT(RTDMAC_3_DEI10, 0x1380), INTCS_VECT(RTDMAC_3_DEI11, 0x13a0),
-	INTCS_VECT(FRC, 0x1700), INTCS_VECT(GCU, 0x1760),
-	INTCS_VECT(LCDC1, 0x1780), INTCS_VECT(CSIRX, 0x17a0),
-	INTCS_VECT(DSITX0_DSITX00, 0x17c0), INTCS_VECT(DSITX0_DSITX01, 0x17e0),
-	INTCS_VECT(SPU2_SPU0, 0x1800), INTCS_VECT(SPU2_SPU1, 0x1820),
-	INTCS_VECT(FSI, 0x1840),
-	INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
-	INTCS_VECT(TMU1_TUNI12, 0x1940),
-	INTCS_VECT(TSIF2, 0x1960), INTCS_VECT(CMT4, 0x1980),
-	INTCS_VECT(MFIS2, 0x1a00), INTCS_VECT(CPORTS2R, 0x1a20),
-	INTCS_VECT(TSG, 0x1ae0), INTCS_VECT(DMASCH1, 0x1b00),
-	INTCS_VECT(SCUW, 0x1b40),
-	INTCS_VECT(VIO60, 0x1b60), INTCS_VECT(VIO61, 0x1b80),
-	INTCS_VECT(CEU21, 0x1ba0), INTCS_VECT(CSI21, 0x1be0),
-	INTCS_VECT(DSITX1_DSITX10, 0x1c00), INTCS_VECT(DSITX1_DSITX11, 0x1c20),
-	INTCS_VECT(DISP, 0x1c40), INTCS_VECT(DSRV, 0x1c60),
-	INTCS_VECT(EMUX2_EMUX20I, 0x1c80), INTCS_VECT(EMUX2_EMUX21I, 0x1ca0),
-	INTCS_VECT(MSTIF0_MST00I, 0x1cc0), INTCS_VECT(MSTIF0_MST01I, 0x1ce0),
-	INTCS_VECT(MSTIF1_MST10I, 0x1d00), INTCS_VECT(MSTIF1_MST11I, 0x1d20),
-	INTCS_VECT(SPUV, 0x2300),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(RTDMAC_0, RTDMAC_0_DEI0, RTDMAC_0_DEI1,
-		   RTDMAC_0_DEI2, RTDMAC_0_DEI3),
-	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR),
-	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI6, RTDMAC_2_DEI7,
-		   RTDMAC_2_DEI8, RTDMAC_2_DEI9),
-	INTC_GROUP(RTDMAC_3, RTDMAC_3_DEI10, RTDMAC_3_DEI11),
-	INTC_GROUP(TMU1, TMU1_TUNI12, TMU1_TUNI11, TMU1_TUNI10),
-	INTC_GROUP(DSITX0, DSITX0_DSITX00, DSITX0_DSITX01),
-	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
-	INTC_GROUP(MSU, MSU_MSU, MSU_MSU2),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
-	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
-	  { 0, 0, 0, CEU,
-	    0, 0, 0, 0 } },
-	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
-	  { 0, 0, 0, VPU,
-	    BBIF2, 0, 0, MFI } },
-	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
-	  { 0, 0, 0, _2DDMAC_2DDM0,
-	    0, ASA, PEP, ICB } },
-	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
-	  { 0, 0, 0, CTI,
-	    JPU_JPEG, 0, LCRC, LCDC } },
-	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
-	  { KEYSC_KEY, RTDMAC_1_DADERR, RTDMAC_1_DEI5, RTDMAC_1_DEI4,
-	    RTDMAC_0_DEI3, RTDMAC_0_DEI2, RTDMAC_0_DEI1, RTDMAC_0_DEI0 } },
-	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
-	  { 0, 0, MSIOF, 0,
-	    _3DG_SGX543, 0, 0, 0 } },
-	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
-	  { 0, TMU0_TUNI02, TMU0_TUNI01, TMU0_TUNI00,
-	    0, 0, 0, 0 } },
-	{ 0xffd201a0, 0xffd201e0, 8, /* IMR8SA / IMCR8SA */
-	  { 0, 0, 0, 0,
-	    0, MSU_MSU, MSU_MSU2, MSUG } },
-	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
-	  { 0, RWDT0, CMT2, CMT0,
-	    0, 0, 0, 0 } },
-	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
-	  { 0, 0, 0, 0,
-	    0, TSIF1, LMB, TSIF0 } },
-	{ 0xffd201b0, 0xffd201f0, 8, /* IMR12SA / IMCR12SA */
-	  { 0, 0, 0, 0,
-	    0, 0, PINTCS_PINT2, PINTCS_PINT1 } },
-	{ 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
-	  { RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	    RTDMAC_3_DEI10, RTDMAC_3_DEI11, 0, 0 } },
-	{ 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
-	  { FRC, 0, 0, GCU,
-	    LCDC1, CSIRX, DSITX0_DSITX00, DSITX0_DSITX01 } },
-	{ 0xffd50194, 0xffd501d4, 8, /* IMR5SA3 / IMCR5SA3 */
-	  { SPU2_SPU0, SPU2_SPU1, FSI, 0,
-	    0, 0, 0, 0 } },
-	{ 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
-	  { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, 0,
-	    TSIF2, CMT4, 0, 0 } },
-	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
-	  { MFIS2, CPORTS2R, 0, 0,
-	    0, 0, 0, TSG } },
-	{ 0xffd501a0, 0xffd501e0, 8, /* IMR8SA3 / IMCR8SA3 */
-	  { DMASCH1, 0, SCUW, VIO60,
-	    VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd501a4, 0xffd501e4, 8, /* IMR9SA3 / IMCR9SA3 */
-	  { DSITX1_DSITX10, DSITX1_DSITX11, DISP, DSRV,
-	    EMUX2_EMUX20I, EMUX2_EMUX21I, MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd501a8, 0xffd501e8, 8, /* IMR10SA3 / IMCR10SA3 */
-	  { MSTIF0_MST00I, MSTIF0_MST01I, 0, 0,
-	    0, 0, 0, 0  } },
-	{ 0xffd60180, 0xffd601c0, 8, /* IMR0SA4 / IMCR0SA4 */
-	  { SPUV, 0, 0, 0,
-	    0, 0, 0, 0  } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
-	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC_2DDM0, ICB } },
-	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
-	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
-	{ 0xffd2000c, 0, 16, 4, /* IPRDS */ { PINTCS_PINT1, PINTCS_PINT2,
-					      0, 0 } },
-	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_0, CEU, MFI, VPU } },
-	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { KEYSC_KEY, RTDMAC_1,
-					      CMT2, CMT0 } },
-	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_TUNI00, TMU0_TUNI01,
-					      TMU0_TUNI02, TSIF1 } },
-	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { VINT, 0, 0, 0 } },
-	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, 0 } },
-	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX543, MSUG, MSU } },
-	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, ASA, LMB, PEP } },
-	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { 0, 0, 0, RWDT0 } },
-	{ 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC_2, 0, 0, 0 } },
-	{ 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC_3, 0, 0, 0 } },
-	{ 0xffd50020, 0, 16, 4, /* IPRIS3 */ { FRC, 0, 0, 0 } },
-	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX0, 0 } },
-	{ 0xffd50028, 0, 16, 4, /* IPRKS3 */ { SPU2, 0, FSI, 0 } },
-	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, TSIF2 } },
-	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, 0, 0, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { MFIS2, CPORTS2R, 0, 0 } },
-	{ 0xffd50040, 0, 16, 4, /* IPRQS3 */ { DMASCH1, 0, SCUW, VIO60 } },
-	{ 0xffd50044, 0, 16, 4, /* IPRRS3 */ { VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd50048, 0, 16, 4, /* IPRSS3 */ { DSITX1_DSITX10, DSITX1_DSITX11,
-					       DISP, DSRV } },
-	{ 0xffd5004c, 0, 16, 4, /* IPRTS3 */ { EMUX2_EMUX20I, EMUX2_EMUX21I,
-					       MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd50050, 0, 16, 4, /* IPRUS3 */ { MSTIF1_MST10I, MSTIF1_MST11I,
-					       0, 0 } },
-	{ 0xffd60000, 0, 16, 4, /* IPRAS4 */ { SPUV, 0, 0, 0 } },
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd201ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xffd50000,
-		.end	= 0xffd501ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 0xffd60000,
-		.end	= 0xffd601ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "sh73a0-intcs",
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
-			   intcs_prio_registers, NULL, NULL),
-};
-
-static struct irqaction sh73a0_intcs_cascade;
-
-static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
-{
-	unsigned int evtcodeas = ioread32((void __iomem *)dev_id);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-
-	return IRQ_HANDLED;
-}
-
-#define PINTER0_PHYS 0xe69000a0
-#define PINTER1_PHYS 0xe69000a4
-#define PINTER0_VIRT IOMEM(0xe69000a0)
-#define PINTER1_VIRT IOMEM(0xe69000a4)
-#define PINTRR0 IOMEM(0xe69000d0)
-#define PINTRR1 IOMEM(0xe69000d4)
-
-#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
-#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
-#define PINT0C_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 16))
-#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
-#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
-
-INTC_PINT(intc_pint0, PINTER0_PHYS, 0xe69000b0, "sh73a0-pint0",		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ),		\
-  INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ),		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
-
-INTC_PINT(intc_pint1, PINTER1_PHYS, 0xe69000c0, "sh73a0-pint1",		\
-  INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
-  INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE,				\
-  INTC_PINT_V_NONE, INTC_PINT_V_NONE,					\
-  INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E(E), \
-  INTC_PINT_E(E), INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE);
-
-static struct irqaction sh73a0_pint0_cascade;
-static struct irqaction sh73a0_pint1_cascade;
-
-static void pint_demux(void __iomem *rr, void __iomem *er, int base_irq)
-{
-	unsigned long value =  ioread32(rr) & ioread32(er);
-	int k;
-
-	for (k = 0; k < 32; k++) {
-		if (value & (1 << (31 - k))) {
-			generic_handle_irq(base_irq + k);
-			iowrite32(~(1 << (31 - k)), rr);
-		}
-	}
-}
-
-static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR0, PINTER0_VIRT, SH73A0_PINT0_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR1, PINTER1_VIRT, SH73A0_PINT1_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-void __init sh73a0_init_irq(void)
-{
-	void __iomem *gic_dist_base = IOMEM(0xf0001000);
-	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
-
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE);
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	register_intc_controller(&intcs_desc);
-	register_intc_controller(&intc_pint0_desc);
-	register_intc_controller(&intc_pint1_desc);
-
-	/* demux using INTEVTSA */
-	sh73a0_intcs_cascade.name = "INTCS cascade";
-	sh73a0_intcs_cascade.handler = sh73a0_intcs_demux;
-	sh73a0_intcs_cascade.dev_id = intevtsa;
-	setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
-
-	/* PINT pins are sanely tied to the GIC as SPI */
-	sh73a0_pint0_cascade.name = "PINT0 cascade";
-	sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
-	setup_irq(gic_spi(33), &sh73a0_pint0_cascade);
-
-	sh73a0_pint1_cascade.name = "PINT1 cascade";
-	sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
-	setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
-}
diff --git a/arch/arm/mach-shmobile/intc.h b/arch/arm/mach-shmobile/intc.h
deleted file mode 100644
index 40b2ad4ca..000000000
--- a/arch/arm/mach-shmobile/intc.h
+++ /dev/null
@@ -1,295 +0,0 @@
-#ifndef __ASM_MACH_INTC_H
-#define __ASM_MACH_INTC_H
-#include <linux/sh_intc.h>
-
-#define INTC_IRQ_PINS_ENUM_16L(p)				\
-	p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7,		\
-	p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,	\
-	p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
-
-#define INTC_IRQ_PINS_ENUM_16H(p)				\
-	p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,	\
-	p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23,	\
-	p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,	\
-	p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
-
-#define INTC_IRQ_PINS_VECT_16L(p, vect)				\
-	vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220),	\
-	vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260),	\
-	vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0),	\
-	vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0),	\
-	vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320),	\
-	vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360),	\
-	vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0),	\
-	vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
-
-#define INTC_IRQ_PINS_VECT_16H(p, vect)				\
-	vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220),	\
-	vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260),	\
-	vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0),	\
-	vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0),	\
-	vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320),	\
-	vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360),	\
-	vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0),	\
-	vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
-
-#define INTC_IRQ_PINS_MASK_16L(p, base)					\
-	{ base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */	\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */	\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_MASK_16H(p, base)					\
-	{ base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */	\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */	\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_PRIO_16L(p, base)					\
-	{ base + 0x10, 0, 32, 4, /* INTPRI00A */			\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x14, 0, 32, 4, /* INTPRI10A */			\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_PRIO_16H(p, base)					\
-	{ base + 0x18, 0, 32, 4, /* INTPRI20A */			\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x1c, 0, 32, 4, /* INTPRI30A */			\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_SENSE_16L(p, base)				\
-	{ base + 0x00, 32, 4, /* ICR1A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x04, 32, 4, /* ICR2A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_SENSE_16H(p, base)				\
-	{ base + 0x08, 32, 4, /* ICR3A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x0c, 32, 4, /* ICR4A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_ACK_16L(p, base)					\
-	{ base + 0x20, 0, 8, /* INTREQ00A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x24, 0, 8, /* INTREQ10A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_ACK_16H(p, base)					\
-	{ base + 0x28, 0, 8, /* INTREQ20A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x2c, 0, 8, /* INTREQ30A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_16(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_16H(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_32(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x6c,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_PINT_E_EMPTY
-#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
-#define INTC_PINT_E(p)							\
-	PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3,	\
-	PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
-
-#define INTC_PINT_V_NONE
-#define INTC_PINT_V(p, vect)					\
-	vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1),	\
-	vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3),	\
-	vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5),	\
-	vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
-
-#define INTC_PINT(p, mask_reg, sense_base, str,				\
-	enums_1, enums_2, enums_3, enums_4,				\
-	vect_1, vect_2, vect_3, vect_4,					\
-	mask_a, mask_b, mask_c, mask_d,					\
-	sense_a, sense_b, sense_c, sense_d)				\
-									\
-enum {									\
-	PINT ## p ## _UNUSED = 0,					\
-	enums_1 enums_2 enums_3 enums_4 				\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	vect_1 vect_2 vect_3 vect_4					\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	{ mask_reg, 0, 32, /* PINTER */					\
-	  { mask_a mask_b mask_c mask_d } }				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	{ sense_base + 0x00, 16, 2, /* PINTCR */			\
-	  { sense_a } },						\
-	{ sense_base + 0x04, 16, 2, /* PINTCR */			\
-	  { sense_b } },						\
-	{ sense_base + 0x08, 16, 2, /* PINTCR */			\
-	  { sense_c } },						\
-	{ sense_base + 0x0c, 16, 2, /* PINTCR */			\
-	  { sense_d } },						\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, NULL,		\
-			     p ## _sense_registers, NULL),		\
-}
-
-/* INTCS */
-#define INTCS_VECT_BASE		0x3400
-#define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
-
-#endif  /* __ASM_MACH_INTC_H */
diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h
deleted file mode 100644
index 3070f6d88..000000000
--- a/arch/arm/mach-shmobile/irqs.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __SHMOBILE_IRQS_H
-#define __SHMOBILE_IRQS_H
-
-#include "include/mach/irqs.h"
-
-/* GIC */
-#define gic_spi(nr)		((nr) + 32)
-#define gic_iid(nr)		(nr) /* ICCIAR / interrupt ID */
-
-/* GPIO IRQ */
-#define _GPIO_IRQ_BASE		2500
-#define GPIO_IRQ_BASE(x)	(_GPIO_IRQ_BASE + (32 * x))
-#define GPIO_IRQ(x, y)		(_GPIO_IRQ_BASE + (32 * x) + y)
-
-#endif /* __SHMOBILE_IRQS_H */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index b0790fc32..0c6bb458b 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -24,6 +24,7 @@
 #include <asm/suspend.h>
 #include "common.h"
 #include "platsmp-apmu.h"
+#include "rcar-gen2.h"
 
 static struct {
 	void __iomem *iomem;
@@ -46,7 +47,7 @@ static int __maybe_unused apmu_power_on(void __iomem *p, int bit)
 	return 0;
 }
 
-static int apmu_power_off(void __iomem *p, int bit)
+static int __maybe_unused apmu_power_off(void __iomem *p, int bit)
 {
 	/* request Core Standby for next WFI */
 	writel_relaxed(3, p + CPUNCR_OFFS(bit));
@@ -67,13 +68,14 @@ static int __maybe_unused apmu_power_off_poll(void __iomem *p, int bit)
 	return 0;
 }
 
-static int apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu))
+static int __maybe_unused apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu))
 {
 	void __iomem *p = apmu_cpus[cpu].iomem;
 
 	return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL;
 }
 
+#ifdef CONFIG_SMP
 static void apmu_init_cpu(struct resource *res, int cpu, int bit)
 {
 	if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem)
@@ -88,7 +90,7 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit)
 static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
 			   struct rcar_apmu_config *apmu_config, int num)
 {
-	u32 id;
+	int id;
 	int k;
 	int bit, index;
 	bool is_allowed;
@@ -117,19 +119,69 @@ static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
 	}
 }
 
-void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
-					   struct rcar_apmu_config *apmu_config,
-					   int num)
+static const struct of_device_id apmu_ids[] = {
+	{ .compatible = "renesas,apmu" },
+	{ /*sentinel*/ }
+};
+
+static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit))
+{
+	struct device_node *np_apmu, *np_cpu;
+	struct resource res;
+	int bit, index;
+	u32 id;
+
+	for_each_matching_node(np_apmu, apmu_ids) {
+		/* only enable the cluster that includes the boot CPU */
+		bool is_allowed = false;
+
+		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
+			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
+			if (np_cpu) {
+				if (!of_property_read_u32(np_cpu, "reg", &id)) {
+					if (id == cpu_logical_map(0)) {
+						is_allowed = true;
+						of_node_put(np_cpu);
+						break;
+					}
+
+				}
+				of_node_put(np_cpu);
+			}
+		}
+		if (!is_allowed)
+			continue;
+
+		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
+			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
+			if (np_cpu) {
+				if (!of_property_read_u32(np_cpu, "reg", &id)) {
+					index = get_logical_index(id);
+					if ((index >= 0) &&
+					    !of_address_to_resource(np_apmu,
+								    0, &res))
+						fn(&res, index, bit);
+				}
+				of_node_put(np_cpu);
+			}
+		}
+	}
+}
+
+static void __init shmobile_smp_apmu_setup_boot(void)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
-	shmobile_boot_arg = MPIDR_HWID_BITMASK;
+}
 
-	/* perform per-cpu setup */
+void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
+					   struct rcar_apmu_config *apmu_config,
+					   int num)
+{
+	shmobile_smp_apmu_setup_boot();
 	apmu_parse_cfg(apmu_init_cpu, apmu_config, num);
 }
 
-#ifdef CONFIG_SMP
 int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	/* For this particular CPU register boot vector */
@@ -137,7 +189,38 @@ int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	return apmu_wrap(cpu, apmu_power_on);
 }
+
+static void __init shmobile_smp_apmu_prepare_cpus_dt(unsigned int max_cpus)
+{
+	shmobile_smp_apmu_setup_boot();
+	apmu_parse_dt(apmu_init_cpu);
+	rcar_gen2_pm_init();
+}
+
+static int shmobile_smp_apmu_boot_secondary_md21(unsigned int cpu,
+						 struct task_struct *idle)
+{
+	/* Error out when hardware debug mode is enabled */
+	if (rcar_gen2_read_mode_pins() & BIT(21)) {
+		pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
+		return -ENOTSUPP;
+	}
+
+	return shmobile_smp_apmu_boot_secondary(cpu, idle);
+}
+
+static struct smp_operations apmu_smp_ops __initdata = {
+	.smp_prepare_cpus	= shmobile_smp_apmu_prepare_cpus_dt,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary_md21,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_can_disable	= shmobile_smp_cpu_can_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
 #endif
+};
+
+CPU_METHOD_OF_DECLARE(shmobile_smp_apmu, "renesas,apmu", &apmu_smp_ops);
+#endif /* CONFIG_SMP */
 
 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND)
 /* nicked from arch/arm/mach-exynos/hotplug.c */
@@ -170,7 +253,7 @@ static inline void cpu_enter_lowpower_a15(void)
 	dsb();
 }
 
-void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
+static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
 {
 
 	/* Select next sleep mode using the APMU */
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
index 64663110a..8d478f1da 100644
--- a/arch/arm/mach-shmobile/platsmp-scu.c
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -17,6 +17,10 @@
 #include <asm/smp_scu.h>
 #include "common.h"
 
+
+static phys_addr_t shmobile_scu_base_phys;
+static void __iomem *shmobile_scu_base;
+
 static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
 					  unsigned long action, void *hcpu)
 {
@@ -26,7 +30,7 @@ static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
 	case CPU_UP_PREPARE:
 		/* For this particular CPU register SCU SMP boot vector */
 		shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
-				  (unsigned long)shmobile_scu_base);
+				  shmobile_scu_base_phys);
 		break;
 	};
 
@@ -37,13 +41,15 @@ static struct notifier_block shmobile_smp_scu_notifier = {
 	.notifier_call = shmobile_smp_scu_notifier_call,
 };
 
-void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
+void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys,
+					  unsigned int max_cpus)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
-	shmobile_boot_arg = MPIDR_HWID_BITMASK;
 
 	/* enable SCU and cache coherency on booting CPU */
+	shmobile_scu_base_phys = scu_base_phys;
+	shmobile_scu_base = ioremap(scu_base_phys, PAGE_SIZE);
 	scu_enable(shmobile_scu_base);
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
 
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 3923e09e9..02e21bceb 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -31,8 +31,17 @@ void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-int shmobile_smp_cpu_disable(unsigned int cpu)
+bool shmobile_smp_cpu_can_disable(unsigned int cpu)
 {
-	return 0; /* Hotplug of any CPU is supported */
+	return true; /* Hotplug of any CPU is supported */
 }
 #endif
+
+bool __init shmobile_smp_init_fallback_ops(void)
+{
+	/* fallback on PSCI/smp_ops if no other DT based method is detected */
+	if (!IS_ENABLED(CONFIG_SMP))
+		return false;
+
+	return platform_can_secondary_boot() ? true : false;
+}
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
deleted file mode 100644
index 34608fcf0..000000000
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * r8a7740 power management support
- *
- * Copyright (C) 2012  Renesas Solutions Corp.
- * Copyright (C) 2012  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/console.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-
-#include "common.h"
-#include "pm-rmobile.h"
-
-#define SYSC_BASE	IOMEM(0xe6180000)
-
-#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-static int r8a7740_pd_a3sm_suspend(void)
-{
-	/*
-	 * The A3SM domain contains the CPU core and therefore it should
-	 * only be turned off if the CPU is not in use.
-	 */
-	return -EBUSY;
-}
-
-static int r8a7740_pd_a3sp_suspend(void)
-{
-	/*
-	 * Serial consoles make use of SCIF hardware located in A3SP,
-	 * keep such power domain on if "no_console_suspend" is set.
-	 */
-	return console_suspend_enabled ? 0 : -EBUSY;
-}
-
-static int r8a7740_pd_d4_suspend(void)
-{
-	/*
-	 * The D4 domain contains the Coresight-ETM hardware block and
-	 * therefore it should only be turned off if the debug module is
-	 * not in use.
-	 */
-	return -EBUSY;
-}
-
-static struct rmobile_pm_domain r8a7740_pm_domains[] = {
-	{
-		.genpd.name	= "A4LC",
-		.base		= SYSC_BASE,
-		.bit_shift	= 1,
-	}, {
-		.genpd.name	= "A4MP",
-		.base		= SYSC_BASE,
-		.bit_shift	= 2,
-	}, {
-		.genpd.name	= "D4",
-		.base		= SYSC_BASE,
-		.bit_shift	= 3,
-		.gov		= &pm_domain_always_on_gov,
-		.suspend	= r8a7740_pd_d4_suspend,
-	}, {
-		.genpd.name	= "A4R",
-		.base		= SYSC_BASE,
-		.bit_shift	= 5,
-	}, {
-		.genpd.name	= "A3RV",
-		.base		= SYSC_BASE,
-		.bit_shift	= 6,
-	}, {
-		.genpd.name	= "A4S",
-		.base		= SYSC_BASE,
-		.bit_shift	= 10,
-		.no_debug	= true,
-	}, {
-		.genpd.name	= "A3SP",
-		.base		= SYSC_BASE,
-		.bit_shift	= 11,
-		.gov		= &pm_domain_always_on_gov,
-		.no_debug	= true,
-		.suspend	= r8a7740_pd_a3sp_suspend,
-	}, {
-		.genpd.name	= "A3SM",
-		.base		= SYSC_BASE,
-		.bit_shift	= 12,
-		.gov		= &pm_domain_always_on_gov,
-		.suspend	= r8a7740_pd_a3sm_suspend,
-	}, {
-		.genpd.name	= "A3SG",
-		.base		= SYSC_BASE,
-		.bit_shift	= 13,
-	}, {
-		.genpd.name	= "A4SU",
-		.base		= SYSC_BASE,
-		.bit_shift	= 20,
-	},
-};
-
-void __init r8a7740_init_pm_domains(void)
-{
-	rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
-	pm_genpd_add_subdomain_names("A4R", "A3RV");
-	pm_genpd_add_subdomain_names("A4S", "A3SP");
-	pm_genpd_add_subdomain_names("A4S", "A3SM");
-	pm_genpd_add_subdomain_names("A4S", "A3SG");
-}
-#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
-
-#ifdef CONFIG_SUSPEND
-static int r8a7740_enter_suspend(suspend_state_t suspend_state)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static void r8a7740_suspend_init(void)
-{
-	shmobile_suspend_ops.enter = r8a7740_enter_suspend;
-}
-#else
-static void r8a7740_suspend_init(void) {}
-#endif
-
-void __init r8a7740_pm_init(void)
-{
-	r8a7740_suspend_init();
-}
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 44a74c4c5..5c9a93f5e 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -9,46 +9,21 @@
  * for more details.
  */
 
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/err.h>
-#include <linux/pm_clock.h>
-#include <linux/pm_domain.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
+#include <linux/soc/renesas/rcar-sysc.h>
 
 #include <asm/io.h>
 
-#include "common.h"
-#include "pm-rcar.h"
 #include "r8a7779.h"
 
 /* SYSC */
 #define SYSCIER 0x0c
 #define SYSCIMR 0x10
 
-struct r8a7779_pm_domain {
-	struct generic_pm_domain genpd;
-	struct rcar_sysc_ch ch;
-};
-
-static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
-{
-	return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
-}
-
 #if defined(CONFIG_PM) || defined(CONFIG_SMP)
 
 static void __init r8a7779_sysc_init(void)
 {
-	void __iomem *base = rcar_sysc_init(0xffd85000);
-
-	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(0x0131000e, base + SYSCIER);
-	iowrite32(0, base + SYSCIMR);
+	rcar_sysc_init(0xffd85000, 0x0131000e);
 }
 
 #else /* CONFIG_PM || CONFIG_SMP */
@@ -57,83 +32,6 @@ static inline void r8a7779_sysc_init(void) {}
 
 #endif /* CONFIG_PM || CONFIG_SMP */
 
-#ifdef CONFIG_PM
-
-static int pd_power_down(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_down(to_r8a7779_ch(genpd));
-}
-
-static int pd_power_up(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_up(to_r8a7779_ch(genpd));
-}
-
-static bool pd_is_off(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_is_off(to_r8a7779_ch(genpd));
-}
-
-static bool pd_active_wakeup(struct device *dev)
-{
-	return true;
-}
-
-static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
-{
-	struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
-
-	genpd->flags = GENPD_FLAG_PM_CLK;
-	pm_genpd_init(genpd, NULL, false);
-	genpd->dev_ops.active_wakeup = pd_active_wakeup;
-	genpd->power_off = pd_power_down;
-	genpd->power_on = pd_power_up;
-
-	if (pd_is_off(&r8a7779_pd->genpd))
-		pd_power_up(&r8a7779_pd->genpd);
-}
-
-static struct r8a7779_pm_domain r8a7779_pm_domains[] = {
-	{
-		.genpd.name = "SH4A",
-		.ch = {
-			.chan_offs = 0x80, /* PWRSR1 .. PWRER1 */
-			.isr_bit = 16, /* SH4A */
-		},
-	},
-	{
-		.genpd.name = "SGX",
-		.ch = {
-			.chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */
-			.isr_bit = 20, /* SGX */
-		},
-	},
-	{
-		.genpd.name = "VDP1",
-		.ch = {
-			.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
-			.isr_bit = 21, /* VDP */
-		},
-	},
-	{
-		.genpd.name = "IMPX3",
-		.ch = {
-			.chan_offs = 0x140, /* PWRSR4 .. PWRER4 */
-			.isr_bit = 24, /* IMP */
-		},
-	},
-};
-
-void __init r8a7779_init_pm_domains(void)
-{
-	int j;
-
-	for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++)
-		r8a7779_init_pm_domain(&r8a7779_pm_domains[j]);
-}
-
-#endif /* CONFIG_PM */
-
 void __init r8a7779_pm_init(void)
 {
 	static int once;
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 6815781ad..dd9ac3668 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -13,9 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/smp.h>
+#include <linux/soc/renesas/rcar-sysc.h>
 #include <asm/io.h>
 #include "common.h"
-#include "pm-rcar.h"
 #include "rcar-gen2.h"
 
 /* RST */
@@ -26,8 +26,7 @@
 #define CA7RESCNT	0x0044
 
 /* On-chip RAM */
-#define MERAM		0xe8080000
-#define RAM		0xe6300000
+#define ICRAM1		0xe63c0000	/* Inter Connect RAM1 (4 KiB) */
 
 /* SYSC */
 #define SYSCIER 0x0c
@@ -37,11 +36,7 @@
 
 static void __init rcar_gen2_sysc_init(u32 syscier)
 {
-	void __iomem *base = rcar_sysc_init(0xe6180000);
-
-	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(syscier, base + SYSCIER);
-	iowrite32(0, base + SYSCIMR);
+	rcar_sysc_init(0xe6180000, syscier);
 }
 
 #else /* CONFIG_SMP */
@@ -58,7 +53,7 @@ void __init rcar_gen2_pm_init(void)
 	struct device_node *np, *cpus;
 	bool has_a7 = false;
 	bool has_a15 = false;
-	phys_addr_t boot_vector_addr = 0;
+	phys_addr_t boot_vector_addr = ICRAM1;
 	u32 syscier = 0;
 
 	if (once++)
@@ -75,14 +70,10 @@ void __init rcar_gen2_pm_init(void)
 			has_a7 = true;
 	}
 
-	if (of_machine_is_compatible("renesas,r8a7790")) {
-		boot_vector_addr = MERAM;
+	if (of_machine_is_compatible("renesas,r8a7790"))
 		syscier = 0x013111ef;
-
-	} else if (of_machine_is_compatible("renesas,r8a7791")) {
-		boot_vector_addr = RAM;
+	else if (of_machine_is_compatible("renesas,r8a7791"))
 		syscier = 0x00111003;
-	}
 
 	/* RAM for jump stub, because BAR requires 256KB aligned address */
 	p = ioremap_nocache(boot_vector_addr, shmobile_boot_size);
diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c
deleted file mode 100644
index 00022ee56..000000000
--- a/arch/arm/mach-shmobile/pm-rcar.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * R-Car SYSC Power management support
- *
- * Copyright (C) 2014  Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
-#include "pm-rcar.h"
-
-/* SYSC */
-#define SYSCSR 0x00
-#define SYSCISR 0x04
-#define SYSCISCR 0x08
-
-#define PWRSR_OFFS 0x00
-#define PWROFFCR_OFFS 0x04
-#define PWRONCR_OFFS 0x0c
-#define PWRER_OFFS 0x14
-
-#define SYSCSR_RETRIES 100
-#define SYSCSR_DELAY_US 1
-
-#define SYSCISR_RETRIES 1000
-#define SYSCISR_DELAY_US 1
-
-static void __iomem *rcar_sysc_base;
-static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */
-
-static int rcar_sysc_pwr_on_off(struct rcar_sysc_ch *sysc_ch,
-				int sr_bit, int reg_offs)
-{
-	int k;
-
-	for (k = 0; k < SYSCSR_RETRIES; k++) {
-		if (ioread32(rcar_sysc_base + SYSCSR) & (1 << sr_bit))
-			break;
-		udelay(SYSCSR_DELAY_US);
-	}
-
-	if (k == SYSCSR_RETRIES)
-		return -EAGAIN;
-
-	iowrite32(1 << sysc_ch->chan_bit,
-		  rcar_sysc_base + sysc_ch->chan_offs + reg_offs);
-
-	return 0;
-}
-
-static int rcar_sysc_pwr_off(struct rcar_sysc_ch *sysc_ch)
-{
-	return rcar_sysc_pwr_on_off(sysc_ch, 0, PWROFFCR_OFFS);
-}
-
-static int rcar_sysc_pwr_on(struct rcar_sysc_ch *sysc_ch)
-{
-	return rcar_sysc_pwr_on_off(sysc_ch, 1, PWRONCR_OFFS);
-}
-
-static int rcar_sysc_update(struct rcar_sysc_ch *sysc_ch,
-			    int (*on_off_fn)(struct rcar_sysc_ch *))
-{
-	unsigned int isr_mask = 1 << sysc_ch->isr_bit;
-	unsigned int chan_mask = 1 << sysc_ch->chan_bit;
-	unsigned int status;
-	unsigned long flags;
-	int ret = 0;
-	int k;
-
-	spin_lock_irqsave(&rcar_sysc_lock, flags);
-
-	iowrite32(isr_mask, rcar_sysc_base + SYSCISCR);
-
-	do {
-		ret = on_off_fn(sysc_ch);
-		if (ret)
-			goto out;
-
-		status = ioread32(rcar_sysc_base +
-				  sysc_ch->chan_offs + PWRER_OFFS);
-	} while (status & chan_mask);
-
-	for (k = 0; k < SYSCISR_RETRIES; k++) {
-		if (ioread32(rcar_sysc_base + SYSCISR) & isr_mask)
-			break;
-		udelay(SYSCISR_DELAY_US);
-	}
-
-	if (k == SYSCISR_RETRIES)
-		ret = -EIO;
-
-	iowrite32(isr_mask, rcar_sysc_base + SYSCISCR);
-
- out:
-	spin_unlock_irqrestore(&rcar_sysc_lock, flags);
-
-	pr_debug("sysc power domain %d: %08x -> %d\n",
-		 sysc_ch->isr_bit, ioread32(rcar_sysc_base + SYSCISR), ret);
-	return ret;
-}
-
-int rcar_sysc_power_down(struct rcar_sysc_ch *sysc_ch)
-{
-	return rcar_sysc_update(sysc_ch, rcar_sysc_pwr_off);
-}
-
-int rcar_sysc_power_up(struct rcar_sysc_ch *sysc_ch)
-{
-	return rcar_sysc_update(sysc_ch, rcar_sysc_pwr_on);
-}
-
-bool rcar_sysc_power_is_off(struct rcar_sysc_ch *sysc_ch)
-{
-	unsigned int st;
-
-	st = ioread32(rcar_sysc_base + sysc_ch->chan_offs + PWRSR_OFFS);
-	if (st & (1 << sysc_ch->chan_bit))
-		return true;
-
-	return false;
-}
-
-void __iomem *rcar_sysc_init(phys_addr_t base)
-{
-	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
-	if (!rcar_sysc_base)
-		panic("unable to ioremap R-Car SYSC hardware block\n");
-
-	return rcar_sysc_base;
-}
diff --git a/arch/arm/mach-shmobile/pm-rcar.h b/arch/arm/mach-shmobile/pm-rcar.h
deleted file mode 100644
index ef3a1ef62..000000000
--- a/arch/arm/mach-shmobile/pm-rcar.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef PM_RCAR_H
-#define PM_RCAR_H
-
-struct rcar_sysc_ch {
-	unsigned long chan_offs;
-	unsigned int chan_bit;
-	unsigned int isr_bit;
-};
-
-int rcar_sysc_power_down(struct rcar_sysc_ch *sysc_ch);
-int rcar_sysc_power_up(struct rcar_sysc_ch *sysc_ch);
-bool rcar_sysc_power_is_off(struct rcar_sysc_ch *sysc_ch);
-void __iomem *rcar_sysc_init(phys_addr_t base);
-
-#endif /* PM_RCAR_H */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 95018209f..45a195501 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -12,6 +12,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#include <linux/clk/renesas.h>
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/of.h>
@@ -34,6 +35,12 @@
 #define PSTR_RETRIES	100
 #define PSTR_DELAY_US	10
 
+static inline
+struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
+{
+	return container_of(d, struct rmobile_pm_domain, genpd);
+}
+
 static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 {
 	struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
@@ -42,7 +49,7 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 	if (rmobile_pd->bit_shift == ~0)
 		return -EBUSY;
 
-	mask = 1 << rmobile_pd->bit_shift;
+	mask = BIT(rmobile_pd->bit_shift);
 	if (rmobile_pd->suspend) {
 		int ret = rmobile_pd->suspend();
 
@@ -79,7 +86,7 @@ static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd,
 	if (rmobile_pd->bit_shift == ~0)
 		return 0;
 
-	mask = 1 << rmobile_pd->bit_shift;
+	mask = BIT(rmobile_pd->bit_shift);
 	if (__raw_readl(rmobile_pd->base + PSTR) & mask)
 		goto out;
 
@@ -118,88 +125,21 @@ static bool rmobile_pd_active_wakeup(struct device *dev)
 	return true;
 }
 
-static int rmobile_pd_attach_dev(struct generic_pm_domain *domain,
-				 struct device *dev)
-{
-	int error;
-
-	error = pm_clk_create(dev);
-	if (error) {
-		dev_err(dev, "pm_clk_create failed %d\n", error);
-		return error;
-	}
-
-	error = pm_clk_add(dev, NULL);
-	if (error) {
-		dev_err(dev, "pm_clk_add failed %d\n", error);
-		goto fail;
-	}
-
-	return 0;
-
-fail:
-	pm_clk_destroy(dev);
-	return error;
-}
-
-static void rmobile_pd_detach_dev(struct generic_pm_domain *domain,
-				  struct device *dev)
-{
-	pm_clk_destroy(dev);
-}
-
 static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 {
 	struct generic_pm_domain *genpd = &rmobile_pd->genpd;
 	struct dev_power_governor *gov = rmobile_pd->gov;
 
 	genpd->flags = GENPD_FLAG_PM_CLK;
-	pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
 	genpd->dev_ops.active_wakeup	= rmobile_pd_active_wakeup;
 	genpd->power_off		= rmobile_pd_power_down;
 	genpd->power_on			= rmobile_pd_power_up;
-	genpd->attach_dev		= rmobile_pd_attach_dev;
-	genpd->detach_dev		= rmobile_pd_detach_dev;
+	genpd->attach_dev		= cpg_mstp_attach_dev;
+	genpd->detach_dev		= cpg_mstp_detach_dev;
 	__rmobile_pd_power_up(rmobile_pd, false);
+	pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
 }
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-
-void rmobile_init_domains(struct rmobile_pm_domain domains[], int num)
-{
-	int j;
-
-	for (j = 0; j < num; j++)
-		rmobile_init_pm_domain(&domains[j]);
-}
-
-void rmobile_add_device_to_domain_td(const char *domain_name,
-				     struct platform_device *pdev,
-				     struct gpd_timing_data *td)
-{
-	struct device *dev = &pdev->dev;
-
-	__pm_genpd_name_add_device(domain_name, dev, td);
-}
-
-void rmobile_add_devices_to_domains(struct pm_domain_device data[],
-				    int size)
-{
-	struct gpd_timing_data latencies = {
-		.stop_latency_ns = DEFAULT_DEV_LATENCY_NS,
-		.start_latency_ns = DEFAULT_DEV_LATENCY_NS,
-		.save_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
-		.restore_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
-	};
-	int j;
-
-	for (j = 0; j < size; j++)
-		rmobile_add_device_to_domain_td(data[j].domain_name,
-						data[j].pdev, &latencies);
-}
-
-#else /* !CONFIG_ARCH_SHMOBILE_LEGACY */
-
 static int rmobile_pd_suspend_busy(void)
 {
 	/*
@@ -373,8 +313,10 @@ static int __init rmobile_add_pm_domains(void __iomem *base,
 		}
 
 		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
-		if (!pd)
+		if (!pd) {
+			of_node_put(np);
 			return -ENOMEM;
+		}
 
 		pd->genpd.name = np->name;
 		pd->base = base;
@@ -430,5 +372,3 @@ static int __init rmobile_init_pm_domains(void)
 }
 
 core_initcall(rmobile_init_pm_domains);
-
-#endif /* !CONFIG_ARCH_SHMOBILE_LEGACY */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 53219786f..8146bb6d7 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -12,10 +12,6 @@
 
 #include <linux/pm_domain.h>
 
-#define DEFAULT_DEV_LATENCY_NS	250000
-
-struct platform_device;
-
 struct rmobile_pm_domain {
 	struct generic_pm_domain genpd;
 	struct dev_power_governor *gov;
@@ -26,39 +22,4 @@ struct rmobile_pm_domain {
 	bool no_debug;
 };
 
-static inline
-struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
-{
-	return container_of(d, struct rmobile_pm_domain, genpd);
-}
-
-struct pm_domain_device {
-	const char *domain_name;
-	struct platform_device *pdev;
-};
-
-#if defined(CONFIG_PM_RMOBILE) && defined(CONFIG_ARCH_SHMOBILE_LEGACY)
-extern void rmobile_init_domains(struct rmobile_pm_domain domains[], int num);
-extern void rmobile_add_device_to_domain_td(const char *domain_name,
-					    struct platform_device *pdev,
-					    struct gpd_timing_data *td);
-
-static inline void rmobile_add_device_to_domain(const char *domain_name,
-						struct platform_device *pdev)
-{
-	rmobile_add_device_to_domain_td(domain_name, pdev, NULL);
-}
-
-extern void rmobile_add_devices_to_domains(struct pm_domain_device data[],
-					   int size);
-#else
-
-#define rmobile_init_domains(domains, num) do { } while (0)
-#define rmobile_add_device_to_domain_td(name, pdev, td) do { } while (0)
-#define rmobile_add_device_to_domain(name, pdev) do { } while (0)
-
-static inline void rmobile_add_devices_to_domains(struct pm_domain_device d[],
-						  int size) {}
-#endif /* CONFIG_PM_RMOBILE */
-
 #endif /* PM_RMOBILE_H */
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
deleted file mode 100644
index a7e466817..000000000
--- a/arch/arm/mach-shmobile/pm-sh73a0.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * sh73a0 Power management support
- *
- *  Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/suspend.h>
-#include "common.h"
-
-#ifdef CONFIG_SUSPEND
-static int sh73a0_enter_suspend(suspend_state_t suspend_state)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static void sh73a0_suspend_init(void)
-{
-	shmobile_suspend_ops.enter = sh73a0_enter_suspend;
-}
-#else
-static void sh73a0_suspend_init(void) {}
-#endif
-
-void __init sh73a0_pm_init(void)
-{
-	sh73a0_suspend_init();
-}
diff --git a/arch/arm/mach-shmobile/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
deleted file mode 100644
index ca7805ad7..000000000
--- a/arch/arm/mach-shmobile/r8a7740.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_R8A7740_H__
-#define __ASM_R8A7740_H__
-
-/*
- * MD_CKx pin
- */
-#define MD_CK2	(1 << 2)
-#define MD_CK1	(1 << 1)
-#define MD_CK0	(1 << 0)
-
-/* DMA slave IDs */
-enum {
-	SHDMA_SLAVE_INVALID,
-	SHDMA_SLAVE_SDHI0_RX,
-	SHDMA_SLAVE_SDHI0_TX,
-	SHDMA_SLAVE_SDHI1_RX,
-	SHDMA_SLAVE_SDHI1_TX,
-	SHDMA_SLAVE_SDHI2_RX,
-	SHDMA_SLAVE_SDHI2_TX,
-	SHDMA_SLAVE_FSIA_RX,
-	SHDMA_SLAVE_FSIA_TX,
-	SHDMA_SLAVE_FSIB_TX,
-	SHDMA_SLAVE_USBHS_TX,
-	SHDMA_SLAVE_USBHS_RX,
-	SHDMA_SLAVE_MMCIF_TX,
-	SHDMA_SLAVE_MMCIF_RX,
-};
-
-extern void r8a7740_meram_workaround(void);
-extern void r8a7740_init_irq_of(void);
-extern void r8a7740_map_io(void);
-extern void r8a7740_add_early_devices(void);
-extern void r8a7740_add_standard_devices(void);
-extern void r8a7740_clock_init(u8 md_ck);
-extern void r8a7740_pinmux_init(void);
-extern void r8a7740_pm_init(void);
-
-#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-extern void __init r8a7740_init_pm_domains(void);
-#else
-static inline void r8a7740_init_pm_domains(void) {}
-#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
-
-#endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
deleted file mode 100644
index f64fedb1f..000000000
--- a/arch/arm/mach-shmobile/r8a7778.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_R8A7778_H__
-#define __ASM_R8A7778_H__
-
-#include <linux/sh_eth.h>
-
-/* HPB-DMA slave IDs */
-enum {
-	HPBDMA_SLAVE_DUMMY,
-	HPBDMA_SLAVE_SDHI0_TX,
-	HPBDMA_SLAVE_SDHI0_RX,
-	HPBDMA_SLAVE_SSI0_TX,
-	HPBDMA_SLAVE_SSI0_RX,
-	HPBDMA_SLAVE_SSI1_TX,
-	HPBDMA_SLAVE_SSI1_RX,
-	HPBDMA_SLAVE_SSI2_TX,
-	HPBDMA_SLAVE_SSI2_RX,
-	HPBDMA_SLAVE_SSI3_TX,
-	HPBDMA_SLAVE_SSI3_RX,
-	HPBDMA_SLAVE_SSI4_TX,
-	HPBDMA_SLAVE_SSI4_RX,
-	HPBDMA_SLAVE_SSI5_TX,
-	HPBDMA_SLAVE_SSI5_RX,
-	HPBDMA_SLAVE_SSI6_TX,
-	HPBDMA_SLAVE_SSI6_RX,
-	HPBDMA_SLAVE_SSI7_TX,
-	HPBDMA_SLAVE_SSI7_RX,
-	HPBDMA_SLAVE_SSI8_TX,
-	HPBDMA_SLAVE_SSI8_RX,
-	HPBDMA_SLAVE_HPBIF0_TX,
-	HPBDMA_SLAVE_HPBIF0_RX,
-	HPBDMA_SLAVE_HPBIF1_TX,
-	HPBDMA_SLAVE_HPBIF1_RX,
-	HPBDMA_SLAVE_HPBIF2_TX,
-	HPBDMA_SLAVE_HPBIF2_RX,
-	HPBDMA_SLAVE_HPBIF3_TX,
-	HPBDMA_SLAVE_HPBIF3_RX,
-	HPBDMA_SLAVE_HPBIF4_TX,
-	HPBDMA_SLAVE_HPBIF4_RX,
-	HPBDMA_SLAVE_HPBIF5_TX,
-	HPBDMA_SLAVE_HPBIF5_RX,
-	HPBDMA_SLAVE_HPBIF6_TX,
-	HPBDMA_SLAVE_HPBIF6_RX,
-	HPBDMA_SLAVE_HPBIF7_TX,
-	HPBDMA_SLAVE_HPBIF7_RX,
-	HPBDMA_SLAVE_HPBIF8_TX,
-	HPBDMA_SLAVE_HPBIF8_RX,
-	HPBDMA_SLAVE_USBFUNC_TX,
-	HPBDMA_SLAVE_USBFUNC_RX,
-};
-
-extern void r8a7778_add_standard_devices(void);
-extern void r8a7778_add_standard_devices_dt(void);
-extern void r8a7778_add_dt_devices(void);
-
-extern void r8a7778_init_late(void);
-extern void r8a7778_init_irq_dt(void);
-extern void r8a7778_clock_init(void);
-extern void r8a7778_init_irq_extpin(int irlm);
-extern void r8a7778_init_irq_extpin_dt(int irlm);
-extern void r8a7778_pinmux_init(void);
-
-extern int r8a7778_usb_phy_power(bool enable);
-
-#endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h
index 19f97046d..2a5f7730a 100644
--- a/arch/arm/mach-shmobile/r8a7779.h
+++ b/arch/arm/mach-shmobile/r8a7779.h
@@ -1,35 +1,8 @@
 #ifndef __ASM_R8A7779_H__
 #define __ASM_R8A7779_H__
 
-#include <linux/sh_clk.h>
-
-/* HPB-DMA slave IDs */
-enum {
-	HPBDMA_SLAVE_DUMMY,
-	HPBDMA_SLAVE_SDHI0_TX,
-	HPBDMA_SLAVE_SDHI0_RX,
-};
-
-extern void r8a7779_init_irq_extpin(int irlm);
-extern void r8a7779_init_irq_extpin_dt(int irlm);
-extern void r8a7779_init_irq_dt(void);
-extern void r8a7779_map_io(void);
-extern void r8a7779_earlytimer_init(void);
-extern void r8a7779_add_early_devices(void);
-extern void r8a7779_add_standard_devices(void);
-extern void r8a7779_init_late(void);
-extern u32 r8a7779_read_mode_pins(void);
-extern void r8a7779_clock_init(void);
-extern void r8a7779_pinmux_init(void);
 extern void r8a7779_pm_init(void);
-extern void r8a7779_register_twd(void);
-
-#ifdef CONFIG_PM
-extern void __init r8a7779_init_pm_domains(void);
-#else
-static inline void r8a7779_init_pm_domains(void) {}
-#endif /* CONFIG_PM */
 
-extern struct smp_operations r8a7779_smp_ops;
+extern const struct smp_operations r8a7779_smp_ops;
 
 #endif /* __ASM_R8A7779_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h
index 1a46d0260..136f3455e 100644
--- a/arch/arm/mach-shmobile/r8a7790.h
+++ b/arch/arm/mach-shmobile/r8a7790.h
@@ -1,6 +1,6 @@
 #ifndef __ASM_R8A7790_H__
 #define __ASM_R8A7790_H__
 
-extern struct smp_operations r8a7790_smp_ops;
+extern const struct smp_operations r8a7790_smp_ops;
 
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h
index 7ca0b7d0f..cf7a8405b 100644
--- a/arch/arm/mach-shmobile/r8a7791.h
+++ b/arch/arm/mach-shmobile/r8a7791.h
@@ -1,6 +1,6 @@
 #ifndef __ASM_R8A7791_H__
 #define __ASM_R8A7791_H__
 
-extern struct smp_operations r8a7791_smp_ops;
+extern const struct smp_operations r8a7791_smp_ops;
 
 #endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 384e6e934..73e3adbc1 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -41,39 +41,26 @@
 
 #define REGULATOR_IRQ_MASK	BIT(2)	/* IRQ2, active low */
 
-static void __iomem *irqc;
-
-static const u8 da9063_mask_regs[] = {
-	DA9063_REG_IRQ_MASK_A,
-	DA9063_REG_IRQ_MASK_B,
-	DA9063_REG_IRQ_MASK_C,
-	DA9063_REG_IRQ_MASK_D,
-};
-
-/* DA9210 System Control and Event Registers */
+/* start of DA9210 System Control and Event Registers */
 #define DA9210_REG_MASK_A		0x54
-#define DA9210_REG_MASK_B		0x55
-
-static const u8 da9210_mask_regs[] = {
-	DA9210_REG_MASK_A,
-	DA9210_REG_MASK_B,
-};
-
-static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
-			     unsigned int nregs)
-{
-	unsigned int i;
 
-	dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
+static void __iomem *irqc;
 
-	for (i = 0; i < nregs; i++) {
-		int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
-		if (error) {
-			dev_err(&client->dev, "i2c error %d\n", error);
-			return;
-		}
-	}
-}
+/* first byte sets the memory pointer, following are consecutive reg values */
+static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
+static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
+
+static struct i2c_msg da9xxx_msgs[2] = {
+	{
+		.addr = 0x58,
+		.len = ARRAY_SIZE(da9063_irq_clr),
+		.buf = da9063_irq_clr,
+	}, {
+		.addr = 0x68,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
+	},
+};
 
 static int regulator_quirk_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
@@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	client = to_i2c_client(dev);
 	dev_dbg(dev, "Detected %s\n", client->name);
 
-	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
-		da9xxx_mask_irqs(client, da9063_mask_regs,
-				 ARRAY_SIZE(da9063_mask_regs));
-	else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
-		da9xxx_mask_irqs(client, da9210_mask_regs,
-				 ARRAY_SIZE(da9210_mask_regs));
+	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
+		int ret;
+
+		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		if (ret != ARRAY_SIZE(da9xxx_msgs))
+			dev_err(&client->dev, "i2c error %d\n", ret);
+	}
 
 	mon = ioread32(irqc + IRQC_MONITOR);
 	if (mon & REGULATOR_IRQ_MASK)
@@ -123,7 +113,8 @@ static int __init rcar_gen2_regulator_quirk(void)
 	u32 mon;
 
 	if (!of_machine_is_compatible("renesas,koelsch") &&
-	    !of_machine_is_compatible("renesas,lager"))
+	    !of_machine_is_compatible("renesas,lager") &&
+	    !of_machine_is_compatible("renesas,gose"))
 		return -ENODEV;
 
 	irqc = ioremap(IRQC_BASE, PAGE_SIZE);
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 37f7b15c0..3c99aaf65 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -18,35 +18,17 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include "common.h"
-
-static struct map_desc emev2_io_desc[] __initdata = {
-#ifdef CONFIG_SMP
-	/* 2M mapping for SCU + L2 controller */
-	{
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0x1e000000),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE
-	},
-#endif
-};
 
-static void __init emev2_map_io(void)
-{
-	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
-}
+#include "common.h"
+#include "emev2.h"
 
 static const char *const emev2_boards_compat_dt[] __initconst = {
 	"renesas,emev2",
 	NULL,
 };
 
-extern struct smp_operations emev2_smp_ops;
-
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
-	.map_io		= emev2_map_io,
 	.init_early	= shmobile_init_delay,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= emev2_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 171174777..d46639fc6 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -20,7 +20,7 @@
 
 #include "common.h"
 
-static const char *r7s72100_boards_compat_dt[] __initdata = {
+static const char *const r7s72100_boards_compat_dt[] __initconst = {
 	"renesas,r7s72100",
 	NULL,
 };
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 446cee611..20173c4f4 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -20,7 +20,7 @@
 
 #include "common.h"
 
-static const char *r8a73a4_boards_compat_dt[] __initdata = {
+static const char *const r8a73a4_boards_compat_dt[] __initconst = {
 	"renesas,r8a73a4",
 	NULL,
 };
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 00291cc17..3849eef0d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -13,663 +13,17 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
-#include <linux/of_platform.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/platform_data/sh_ipmmu.h>
 
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
-#include "dma-register.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "r8a7740.h"
-
-static struct map_desc r8a7740_io_desc[] __initdata = {
-	 /*
-	  * for CPGA/INTC/PFC
-	  * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
-	  */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 160 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * for l2x0_init()
-	 * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
-	 */
-	{
-		.virtual	= 0xf0002000,
-		.pfn		= __phys_to_pfn(0xf0100000),
-		.length		= PAGE_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#endif
-};
-
-void __init r8a7740_map_io(void)
-{
-	debug_ll_io_init();
-	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
-}
-
-/* PFC */
-static const struct resource pfc_resources[] = {
-	DEFINE_RES_MEM(0xe6050000, 0x8000),
-	DEFINE_RES_MEM(0xe605800c, 0x0020),
-};
-
-void __init r8a7740_pinmux_init(void)
-{
-	platform_device_register_simple("pfc-r8a7740", -1, pfc_resources,
-					ARRAY_SIZE(pfc_resources));
-}
-
-static struct renesas_intc_irqpin_config irqpin0_platform_data = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
-};
-
-static struct resource irqpin0_resources[] = {
-	DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */
-	DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */
-	DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */
-	DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */
-	DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ3 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ4 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ5 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ6 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ7 */
-};
-
-static struct platform_device irqpin0_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 0,
-	.resource	= irqpin0_resources,
-	.num_resources	= ARRAY_SIZE(irqpin0_resources),
-	.dev		= {
-		.platform_data  = &irqpin0_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin1_platform_data = {
-	.irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */
-};
-
-static struct resource irqpin1_resources[] = {
-	DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */
-	DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */
-	DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */
-	DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */
-	DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ8 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ9 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ10 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ11 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ12 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ13 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ14 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ15 */
-};
-
-static struct platform_device irqpin1_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 1,
-	.resource	= irqpin1_resources,
-	.num_resources	= ARRAY_SIZE(irqpin1_resources),
-	.dev		= {
-		.platform_data  = &irqpin1_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin2_platform_data = {
-	.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
-};
-
-static struct resource irqpin2_resources[] = {
-	DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */
-	DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI30A */
-	DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ30A */
-	DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK30A */
-	DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR30A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ16 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ17 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ18 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ19 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ20 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ21 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ22 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ23 */
-};
-
-static struct platform_device irqpin2_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 2,
-	.resource	= irqpin2_resources,
-	.num_resources	= ARRAY_SIZE(irqpin2_resources),
-	.dev		= {
-		.platform_data  = &irqpin2_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin3_platform_data = {
-	.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
-};
-
-static struct resource irqpin3_resources[] = {
-	DEFINE_RES_MEM(0xe690000c, 4), /* ICR3A */
-	DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */
-	DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */
-	DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */
-	DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ24 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ25 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ26 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ27 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ28 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ29 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ30 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ31 */
-};
-
-static struct platform_device irqpin3_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 3,
-	.resource	= irqpin3_resources,
-	.num_resources	= ARRAY_SIZE(irqpin3_resources),
-	.dev		= {
-		.platform_data  = &irqpin3_platform_data,
-	},
-};
-
-/* SCIF */
-#define R8A7740_SCIF(scif_type, index, baseaddr, irq)		\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= scif_type,				\
-	.flags		= UPF_BOOT_AUTOCONF,			\
-	.scscr		= SCSCR_RE | SCSCR_TE,			\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-};								\
-								\
-static struct platform_device scif##index##_device = {		\
-	.name		= "sh-sci",				\
-	.id		= index,				\
-	.resource	= scif##index##_resources,		\
-	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
-	.dev		= {					\
-		.platform_data	= &scif##index##_platform_data,	\
-	},							\
-}
-
-R8A7740_SCIF(PORT_SCIFA, 0, 0xe6c40000, gic_spi(100));
-R8A7740_SCIF(PORT_SCIFA, 1, 0xe6c50000, gic_spi(101));
-R8A7740_SCIF(PORT_SCIFA, 2, 0xe6c60000, gic_spi(102));
-R8A7740_SCIF(PORT_SCIFA, 3, 0xe6c70000, gic_spi(103));
-R8A7740_SCIF(PORT_SCIFA, 4, 0xe6c80000, gic_spi(104));
-R8A7740_SCIF(PORT_SCIFA, 5, 0xe6cb0000, gic_spi(105));
-R8A7740_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(106));
-R8A7740_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(107));
-R8A7740_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(108));
-
-/* CMT */
-static struct sh_timer_config cmt1_platform_data = {
-	.channels_mask = 0x3f,
-};
-
-static struct resource cmt1_resources[] = {
-	DEFINE_RES_MEM(0xe6138000, 0x170),
-	DEFINE_RES_IRQ(gic_spi(58)),
-};
-
-static struct platform_device cmt1_device = {
-	.name		= "sh-cmt-48",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &cmt1_platform_data,
-	},
-	.resource	= cmt1_resources,
-	.num_resources	= ARRAY_SIZE(cmt1_resources),
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(0xfff80000, 0x2c),
-	DEFINE_RES_IRQ(gic_spi(198)),
-	DEFINE_RES_IRQ(gic_spi(199)),
-	DEFINE_RES_IRQ(gic_spi(200)),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-/* IPMMUI (an IPMMU module for ICB/LMB) */
-static struct resource ipmmu_resources[] = {
-	[0] = {
-		.name	= "IPMMUI",
-		.start	= 0xfe951000,
-		.end	= 0xfe9510ff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static const char * const ipmmu_dev_names[] = {
-	"sh_mobile_lcdc_fb.0",
-	"sh_mobile_lcdc_fb.1",
-	"sh_mobile_ceu.0",
-};
-
-static struct shmobile_ipmmu_platform_data ipmmu_platform_data = {
-	.dev_names = ipmmu_dev_names,
-	.num_dev_names = ARRAY_SIZE(ipmmu_dev_names),
-};
-
-static struct platform_device ipmmu_device = {
-	.name           = "ipmmu",
-	.id             = -1,
-	.dev = {
-		.platform_data = &ipmmu_platform_data,
-	},
-	.resource       = ipmmu_resources,
-	.num_resources  = ARRAY_SIZE(ipmmu_resources),
-};
-
-static struct platform_device *r8a7740_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&scif8_device,
-	&irqpin0_device,
-	&irqpin1_device,
-	&irqpin2_device,
-	&irqpin3_device,
-	&tmu0_device,
-	&ipmmu_device,
-	&cmt1_device,
-};
-
-/* DMA */
-static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
-		.addr		= 0xe6850030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
-		.addr		= 0xe6850030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
-		.addr		= 0xe6860030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc9,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
-		.addr		= 0xe6860030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xca,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
-		.addr		= 0xe6870030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xcd,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
-		.addr		= 0xe6870030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xce,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIA_TX,
-		.addr		= 0xfe1f0024,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIA_RX,
-		.addr		= 0xfe1f0020,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIB_TX,
-		.addr		= 0xfe1f0064,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb5,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd2,
-	},
-};
-
-#define DMA_CHANNEL(a, b, c)			\
-{						\
-	.offset		= a,			\
-	.dmars		= b,			\
-	.dmars_bit	= c,			\
-	.chclr_offset	= (0x220 - 0x20) + a	\
-}
-
-static const struct sh_dmae_channel r8a7740_dmae_channels[] = {
-	DMA_CHANNEL(0x00, 0, 0),
-	DMA_CHANNEL(0x10, 0, 8),
-	DMA_CHANNEL(0x20, 4, 0),
-	DMA_CHANNEL(0x30, 4, 8),
-	DMA_CHANNEL(0x50, 8, 0),
-	DMA_CHANNEL(0x60, 8, 8),
-};
-
-static struct sh_dmae_pdata dma_platform_data = {
-	.slave		= r8a7740_dmae_slaves,
-	.slave_num	= ARRAY_SIZE(r8a7740_dmae_slaves),
-	.channel	= r8a7740_dmae_channels,
-	.channel_num	= ARRAY_SIZE(r8a7740_dmae_channels),
-	.ts_low_shift	= TS_LOW_SHIFT,
-	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
-	.ts_high_shift	= TS_HI_SHIFT,
-	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
-	.ts_shift	= dma_ts_shift,
-	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chclr_present	= 1,
-};
-
-/* Resource order important! */
-static struct resource r8a7740_dmae0_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe008020,
-		.end	= 0xfe00828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe009000,
-		.end	= 0xfe00900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(34),
-		.end	= gic_spi(34),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(28),
-		.end	= gic_spi(33),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* Resource order important! */
-static struct resource r8a7740_dmae1_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe018020,
-		.end	= 0xfe01828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe019000,
-		.end	= 0xfe01900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(41),
-		.end	= gic_spi(41),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(35),
-		.end	= gic_spi(40),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* Resource order important! */
-static struct resource r8a7740_dmae2_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe028020,
-		.end	= 0xfe02828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe029000,
-		.end	= 0xfe02900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(48),
-		.end	= gic_spi(48),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(42),
-		.end	= gic_spi(47),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 0,
-	.resource	= r8a7740_dmae0_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_dmae0_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-static struct platform_device dma1_device = {
-	.name		= "sh-dma-engine",
-	.id		= 1,
-	.resource	= r8a7740_dmae1_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_dmae1_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-static struct platform_device dma2_device = {
-	.name		= "sh-dma-engine",
-	.id		= 2,
-	.resource	= r8a7740_dmae2_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_dmae2_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-/* USB-DMAC */
-static const struct sh_dmae_channel r8a7740_usb_dma_channels[] = {
-	{
-		.offset = 0,
-	}, {
-		.offset = 0x20,
-	},
-};
-
-static const struct sh_dmae_slave_config r8a7740_usb_dma_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_USBHS_TX,
-		.chcr		= USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
-	}, {
-		.slave_id	= SHDMA_SLAVE_USBHS_RX,
-		.chcr		= USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
-	},
-};
-
-static struct sh_dmae_pdata usb_dma_platform_data = {
-	.slave		= r8a7740_usb_dma_slaves,
-	.slave_num	= ARRAY_SIZE(r8a7740_usb_dma_slaves),
-	.channel	= r8a7740_usb_dma_channels,
-	.channel_num	= ARRAY_SIZE(r8a7740_usb_dma_channels),
-	.ts_low_shift	= USBTS_LOW_SHIFT,
-	.ts_low_mask	= USBTS_LOW_BIT << USBTS_LOW_SHIFT,
-	.ts_high_shift	= USBTS_HI_SHIFT,
-	.ts_high_mask	= USBTS_HI_BIT << USBTS_HI_SHIFT,
-	.ts_shift	= dma_usbts_shift,
-	.ts_shift_num	= ARRAY_SIZE(dma_usbts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chcr_offset	= 0x14,
-	.chcr_ie_bit	= 1 << 5,
-	.dmaor_is_32bit	= 1,
-	.needs_tend_set	= 1,
-	.no_dmars	= 1,
-	.slave_only	= 1,
-};
-
-static struct resource r8a7740_usb_dma_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xe68a0020,
-		.end	= 0xe68a0064 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* VCR/SWR/DMICR */
-		.start	= 0xe68a0000,
-		.end	= 0xe68a0014 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* IRQ for channels */
-		.start	= gic_spi(49),
-		.end	= gic_spi(49),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_dma_device = {
-	.name		= "sh-dma-engine",
-	.id		= 3,
-	.resource	= r8a7740_usb_dma_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_usb_dma_resources),
-	.dev		= {
-		.platform_data	= &usb_dma_platform_data,
-	},
-};
-
-/* I2C */
-static struct resource i2c0_resources[] = {
-	[0] = {
-		.name	= "IIC0",
-		.start	= 0xfff20000,
-		.end	= 0xfff20425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(201),
-		.end	= gic_spi(204),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	[0] = {
-		.name	= "IIC1",
-		.start	= 0xe6c20000,
-		.end	= 0xe6c20425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(70), /* IIC1_ALI1 */
-		.end    = gic_spi(73), /* IIC1_DTEI1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 0,
-	.resource	= i2c0_resources,
-	.num_resources	= ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 1,
-	.resource	= i2c1_resources,
-	.num_resources	= ARRAY_SIZE(i2c1_resources),
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= gic_spi(83),
-		.end	= gic_spi(83),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name	= "armv7-pmu",
-	.id	= -1,
-	.num_resources = ARRAY_SIZE(pmu_resources),
-	.resource = pmu_resources,
-};
-
-static struct platform_device *r8a7740_late_devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&dma0_device,
-	&dma1_device,
-	&dma2_device,
-	&usb_dma_device,
-	&pmu_device,
-};
 
 /*
  * r8a7740 chip has lasting errata on MERAM buffer.
@@ -678,7 +32,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = {
  *	"Media RAM (MERAM)" on r8a7740 documentation
  */
 #define MEBUFCNTR	0xFE950098
-void __init r8a7740_meram_workaround(void)
+static void __init r8a7740_meram_workaround(void)
 {
 	void __iomem *reg;
 
@@ -689,70 +43,13 @@ void __init r8a7740_meram_workaround(void)
 	}
 }
 
-void __init r8a7740_add_standard_devices(void)
-{
-	static struct pm_domain_device domain_devices[] __initdata = {
-		{ "A4R",  &tmu0_device },
-		{ "A4R",  &i2c0_device },
-		{ "A4S",  &irqpin0_device },
-		{ "A4S",  &irqpin1_device },
-		{ "A4S",  &irqpin2_device },
-		{ "A4S",  &irqpin3_device },
-		{ "A3SP", &scif0_device },
-		{ "A3SP", &scif1_device },
-		{ "A3SP", &scif2_device },
-		{ "A3SP", &scif3_device },
-		{ "A3SP", &scif4_device },
-		{ "A3SP", &scif5_device },
-		{ "A3SP", &scif6_device },
-		{ "A3SP", &scif7_device },
-		{ "A3SP", &scif8_device },
-		{ "A3SP", &i2c1_device },
-		{ "A3SP", &ipmmu_device },
-		{ "A3SP", &dma0_device },
-		{ "A3SP", &dma1_device },
-		{ "A3SP", &dma2_device },
-		{ "A3SP", &usb_dma_device },
-	};
-
-	r8a7740_init_pm_domains();
-
-	/* add devices */
-	platform_add_devices(r8a7740_early_devices,
-			    ARRAY_SIZE(r8a7740_early_devices));
-	platform_add_devices(r8a7740_late_devices,
-			     ARRAY_SIZE(r8a7740_late_devices));
-
-	/* add devices to PM domain  */
-	rmobile_add_devices_to_domains(domain_devices,
-				       ARRAY_SIZE(domain_devices));
-}
-
-void __init r8a7740_add_early_devices(void)
-{
-	early_platform_add_devices(r8a7740_early_devices,
-				   ARRAY_SIZE(r8a7740_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-#ifdef CONFIG_USE_OF
-
-void __init r8a7740_init_irq_of(void)
+static void __init r8a7740_init_irq_of(void)
 {
 	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
 	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
 	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
-
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
 	irqchip_init();
-#endif
 
 	/* route signals to GIC */
 	iowrite32(0x0, pfc_inta_ctrl);
@@ -779,26 +76,19 @@ void __init r8a7740_init_irq_of(void)
 static void __init r8a7740_generic_init(void)
 {
 	r8a7740_meram_workaround();
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char *r8a7740_boards_compat_dt[] __initdata = {
+static const char *const r8a7740_boards_compat_dt[] __initconst = {
 	"renesas,r8a7740",
 	NULL,
 };
 
 DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
-	.map_io		= r8a7740_map_io,
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
-
-#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index c49aa094f..cf236db68 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -15,36 +15,16 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/clk/shmobile.h>
-#include <linux/kernel.h>
+#include <linux/clk/renesas.h>
 #include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/dma-rcar-hpbdma.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
 #include <linux/irqchip.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/dma-mapping.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
-#include "irqs.h"
-#include "r8a7778.h"
 
 #define MODEMR 0xffcc0020
 
-#ifdef CONFIG_COMMON_CLK
 static void __init r8a7778_timer_init(void)
 {
 	u32 mode;
@@ -55,555 +35,21 @@ static void __init r8a7778_timer_init(void)
 	iounmap(modemr);
 	r8a7778_clocks_init(mode);
 }
-#endif
 
-/* SCIF */
-#define R8A7778_SCIF(index, baseaddr, irq)			\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
-	.type		= PORT_SCIF,				\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-}
-
-R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
-R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67));
-R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68));
-R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69));
-R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
-R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
-
-#define r8a7778_register_scif(index)					       \
-	platform_device_register_resndata(NULL, "sh-sci", index,	       \
-					  scif##index##_resources,	       \
-					  ARRAY_SIZE(scif##index##_resources), \
-					  &scif##index##_platform_data,	       \
-					  sizeof(scif##index##_platform_data))
-
-/* TMU */
-static struct sh_timer_config sh_tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource sh_tmu0_resources[] = {
-	DEFINE_RES_MEM(0xffd80000, 0x30),
-	DEFINE_RES_IRQ(gic_iid(0x40)),
-	DEFINE_RES_IRQ(gic_iid(0x41)),
-	DEFINE_RES_IRQ(gic_iid(0x42)),
-};
-
-#define r8a7778_register_tmu(idx)			\
-	platform_device_register_resndata(		\
-		NULL, "sh-tmu", idx,			\
-		sh_tmu##idx##_resources,		\
-		ARRAY_SIZE(sh_tmu##idx##_resources),	\
-		&sh_tmu##idx##_platform_data,		\
-		sizeof(sh_tmu##idx##_platform_data))
-
-int r8a7778_usb_phy_power(bool enable)
-{
-	static struct usb_phy *phy = NULL;
-	int ret = 0;
-
-	if (!phy)
-		phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
-	if (IS_ERR(phy)) {
-		pr_err("kernel doesn't have usb phy driver\n");
-		return PTR_ERR(phy);
-	}
-
-	if (enable)
-		ret = usb_phy_init(phy);
-	else
-		usb_phy_shutdown(phy);
-
-	return ret;
-}
-
-/* USB */
-static int usb_power_on(struct platform_device *pdev)
-{
-	int ret = r8a7778_usb_phy_power(true);
-
-	if (ret)
-		return ret;
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
-	if (r8a7778_usb_phy_power(false))
-		return;
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-
-static int ehci_init_internal_buffer(struct usb_hcd *hcd)
-{
-	/*
-	 * Below are recommended values from the datasheet;
-	 * see [USB :: Setting of EHCI Internal Buffer].
-	 */
-	/* EHCI IP internal buffer setting */
-	iowrite32(0x00ff0040, hcd->regs + 0x0094);
-	/* EHCI IP internal buffer enable */
-	iowrite32(0x00000001, hcd->regs + 0x009C);
-
-	return 0;
-}
-
-static struct usb_ehci_pdata ehci_pdata __initdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-	.pre_setup	= ehci_init_internal_buffer,
-};
-
-static struct resource ehci_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-static struct usb_ohci_pdata ohci_pdata __initdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ohci_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70400, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-#define USB_PLATFORM_INFO(hci)					\
-static struct platform_device_info hci##_info __initdata = {	\
-	.name		= #hci "-platform",			\
-	.id		= -1,					\
-	.res		= hci##_resources,			\
-	.num_res	= ARRAY_SIZE(hci##_resources),		\
-	.data		= &hci##_pdata,				\
-	.size_data	= sizeof(hci##_pdata),			\
-	.dma_mask	= DMA_BIT_MASK(32),			\
-}
-
-USB_PLATFORM_INFO(ehci);
-USB_PLATFORM_INFO(ohci);
-
-/* PFC/GPIO */
-static struct resource pfc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfffc0000, 0x118),
-};
-
-#define R8A7778_GPIO(idx)						\
-static struct resource r8a7778_gpio##idx##_resources[] __initdata = {	\
-	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
-	DEFINE_RES_IRQ(gic_iid(0x87)),					\
-};									\
-									\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
-	.gpio_base	= 32 * (idx),					\
-	.irq_base	= GPIO_IRQ_BASE(idx),				\
-	.number_of_pins	= 32,						\
-	.pctl_name	= "pfc-r8a7778",				\
-}
-
-R8A7778_GPIO(0);
-R8A7778_GPIO(1);
-R8A7778_GPIO(2);
-R8A7778_GPIO(3);
-R8A7778_GPIO(4);
-
-#define r8a7778_register_gpio(idx)				\
-	platform_device_register_resndata(			\
-		NULL, "gpio_rcar", idx,				\
-		r8a7778_gpio##idx##_resources,			\
-		ARRAY_SIZE(r8a7778_gpio##idx##_resources),	\
-		&r8a7778_gpio##idx##_platform_data,		\
-		sizeof(r8a7778_gpio##idx##_platform_data))
-
-void __init r8a7778_pinmux_init(void)
-{
-	platform_device_register_simple(
-		"pfc-r8a7778", -1,
-		pfc_resources,
-		ARRAY_SIZE(pfc_resources));
-
-	r8a7778_register_gpio(0);
-	r8a7778_register_gpio(1);
-	r8a7778_register_gpio(2);
-	r8a7778_register_gpio(3);
-	r8a7778_register_gpio(4);
-};
-
-/* I2C */
-static struct resource i2c_resources[] __initdata = {
-	/* I2C0 */
-	DEFINE_RES_MEM(0xffc70000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x63)),
-	/* I2C1 */
-	DEFINE_RES_MEM(0xffc71000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6e)),
-	/* I2C2 */
-	DEFINE_RES_MEM(0xffc72000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6c)),
-	/* I2C3 */
-	DEFINE_RES_MEM(0xffc73000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6d)),
-};
-
-static void __init r8a7778_register_i2c(int id)
-{
-	BUG_ON(id < 0 || id > 3);
-
-	platform_device_register_simple(
-		"i2c-rcar", id,
-		i2c_resources + (2 * id), 2);
-}
-
-/* HSPI */
-static struct resource hspi_resources[] __initdata = {
-	/* HSPI0 */
-	DEFINE_RES_MEM(0xfffc7000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x5f)),
-	/* HSPI1 */
-	DEFINE_RES_MEM(0xfffc8000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x74)),
-	/* HSPI2 */
-	DEFINE_RES_MEM(0xfffc6000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x75)),
-};
-
-static void __init r8a7778_register_hspi(int id)
-{
-	BUG_ON(id < 0 || id > 2);
-
-	platform_device_register_simple(
-		"sh-hspi", id,
-		hspi_resources + (2 * id), 2);
-}
-
-void __init r8a7778_add_dt_devices(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
-	if (base) {
-		/*
-		 * Shared attribute override enable, 64K*16way
-		 * don't call iounmap(base)
-		 */
-		l2x0_init(base, 0x00400000, 0xc20f0fff);
-	}
-#endif
-}
-
-/* HPB-DMA */
-
-/* Asynchronous mode register (ASYNCMDR) bits */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MASK	BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE	BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI	0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MASK	BIT(1)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
-
-#define HPBDMA_SSI(_id)				\
-{						\
-	.id	= HPBDMA_SLAVE_SSI## _id ##_TX,	\
-	.addr	= 0xffd91008 + (_id * 0x40),	\
-	.dcr	= HPB_DMAE_DCR_CT |		\
-		  HPB_DMAE_DCR_DIP |		\
-		  HPB_DMAE_DCR_SPDS_32BIT |	\
-		  HPB_DMAE_DCR_DMDL |		\
-		  HPB_DMAE_DCR_DPDS_32BIT,	\
-	.port   = _id + (_id << 8),		\
-	.dma_ch = (28 + _id),			\
-}, {						\
-	.id	= HPBDMA_SLAVE_SSI## _id ##_RX,	\
-	.addr	= 0xffd9100c + (_id * 0x40),	\
-	.dcr	= HPB_DMAE_DCR_CT |		\
-		  HPB_DMAE_DCR_DIP |		\
-		  HPB_DMAE_DCR_SMDL |		\
-		  HPB_DMAE_DCR_SPDS_32BIT |	\
-		  HPB_DMAE_DCR_DPDS_32BIT,	\
-	.port   = _id + (_id << 8),		\
-	.dma_ch = (28 + _id),			\
-}
-
-#define HPBDMA_HPBIF(_id)				\
-{							\
-	.id	= HPBDMA_SLAVE_HPBIF## _id ##_TX,	\
-	.addr	= 0xffda0000 + (_id * 0x1000),		\
-	.dcr	= HPB_DMAE_DCR_CT |			\
-		  HPB_DMAE_DCR_DIP |			\
-		  HPB_DMAE_DCR_SPDS_32BIT |		\
-		  HPB_DMAE_DCR_DMDL |			\
-		  HPB_DMAE_DCR_DPDS_32BIT,		\
-	.port   = 0x1111,				\
-	.dma_ch = (28 + _id),				\
-}, {							\
-	.id	= HPBDMA_SLAVE_HPBIF## _id ##_RX,	\
-	.addr	= 0xffda0000 + (_id * 0x1000),		\
-	.dcr	= HPB_DMAE_DCR_CT |			\
-		  HPB_DMAE_DCR_DIP |			\
-		  HPB_DMAE_DCR_SMDL |			\
-		  HPB_DMAE_DCR_SPDS_32BIT |		\
-		  HPB_DMAE_DCR_DPDS_32BIT,		\
-	.port   = 0x1111,				\
-	.dma_ch = (28 + _id),				\
-}
-
-static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
-	{
-		.id	= HPBDMA_SLAVE_SDHI0_TX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DMDL |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 21,
-	}, {
-		.id	= HPBDMA_SLAVE_SDHI0_RX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SMDL |
-			  HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 22,
-	}, {
-		.id	= HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
-		.addr	= 0xffe60018,
-		.dcr	= HPB_DMAE_DCR_SPDS_32BIT |
-			  HPB_DMAE_DCR_DMDL |
-			  HPB_DMAE_DCR_DPDS_32BIT,
-		.port	= 0x0000,
-		.dma_ch	= 14,
-	}, {
-		.id	= HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
-		.addr	= 0xffe6001c,
-		.dcr	= HPB_DMAE_DCR_SMDL |
-			  HPB_DMAE_DCR_SPDS_32BIT |
-			  HPB_DMAE_DCR_DPDS_32BIT,
-		.port	= 0x0101,
-		.dma_ch	= 15,
-	},
-
-	HPBDMA_SSI(0),
-	HPBDMA_SSI(1),
-	HPBDMA_SSI(2),
-	HPBDMA_SSI(3),
-	HPBDMA_SSI(4),
-	HPBDMA_SSI(5),
-	HPBDMA_SSI(6),
-	HPBDMA_SSI(7),
-	HPBDMA_SSI(8),
-
-	HPBDMA_HPBIF(0),
-	HPBDMA_HPBIF(1),
-	HPBDMA_HPBIF(2),
-	HPBDMA_HPBIF(3),
-	HPBDMA_HPBIF(4),
-	HPBDMA_HPBIF(5),
-	HPBDMA_HPBIF(6),
-	HPBDMA_HPBIF(7),
-	HPBDMA_HPBIF(8),
-};
-
-static const struct hpb_dmae_channel hpb_dmae_channels[] = {
-	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
-	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
-	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
-	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX),   /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX),   /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX),   /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX),   /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX),   /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX),   /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX),   /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX),   /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX),   /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX),   /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX),   /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX),   /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX),   /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX),   /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX),   /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX),   /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX),   /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX),   /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
-};
-
-static struct hpb_dmae_pdata dma_platform_data __initdata = {
-	.slaves			= hpb_dmae_slaves,
-	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
-	.channels		= hpb_dmae_channels,
-	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
-	.ts_shift		= {
-		[XMIT_SZ_8BIT]	= 0,
-		[XMIT_SZ_16BIT]	= 1,
-		[XMIT_SZ_32BIT]	= 2,
-	},
-	.num_hw_channels	= 39,
-};
-
-static struct resource hpb_dmae_resources[] __initdata = {
-	/* Channel registers */
-	DEFINE_RES_MEM(0xffc08000, 0x1000),
-	/* Common registers */
-	DEFINE_RES_MEM(0xffc09000, 0x170),
-	/* Asynchronous reset registers */
-	DEFINE_RES_MEM(0xffc00300, 4),
-	/* Asynchronous mode registers */
-	DEFINE_RES_MEM(0xffc00400, 4),
-	/* IRQ for DMA channels */
-	DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
-};
-
-static void __init r8a7778_register_hpb_dmae(void)
-{
-	platform_device_register_resndata(NULL, "hpb-dma-engine",
-					  -1, hpb_dmae_resources,
-					  ARRAY_SIZE(hpb_dmae_resources),
-					  &dma_platform_data,
-					  sizeof(dma_platform_data));
-}
-
-void __init r8a7778_add_standard_devices(void)
-{
-	r8a7778_add_dt_devices();
-	r8a7778_register_tmu(0);
-	r8a7778_register_scif(0);
-	r8a7778_register_scif(1);
-	r8a7778_register_scif(2);
-	r8a7778_register_scif(3);
-	r8a7778_register_scif(4);
-	r8a7778_register_scif(5);
-	r8a7778_register_i2c(0);
-	r8a7778_register_i2c(1);
-	r8a7778_register_i2c(2);
-	r8a7778_register_i2c(3);
-	r8a7778_register_hspi(0);
-	r8a7778_register_hspi(1);
-	r8a7778_register_hspi(2);
-
-	r8a7778_register_hpb_dmae();
-}
-
-void __init r8a7778_init_late(void)
-{
-	shmobile_init_late();
-	platform_device_register_full(&ehci_info);
-	platform_device_register_full(&ohci_info);
-}
-
-static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
-	.sense_bitfield_width = 2,
-};
-
-static struct resource irqpin_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
-	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
-	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
-	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
-	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
-	DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
-};
-
-void __init r8a7778_init_irq_extpin_dt(int irlm)
-{
-	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
-	unsigned long tmp;
-
-	if (!icr0) {
-		pr_warn("r8a7778: unable to setup external irq pin mode\n");
-		return;
-	}
-
-	tmp = ioread32(icr0);
-	if (irlm)
-		tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
-	else
-		tmp &= ~(1 << 23); /* IRL mode - not supported */
-	tmp |= (1 << 21); /* LVLMODE = 1 */
-	iowrite32(tmp, icr0);
-	iounmap(icr0);
-}
-
-void __init r8a7778_init_irq_extpin(int irlm)
-{
-	r8a7778_init_irq_extpin_dt(irlm);
-	if (irlm)
-		platform_device_register_resndata(
-			NULL, "renesas_intc_irqpin", -1,
-			irqpin_resources, ARRAY_SIZE(irqpin_resources),
-			&irqpin_platform_data, sizeof(irqpin_platform_data));
-}
-
-#ifdef CONFIG_USE_OF
 #define INT2SMSKCR0	0x82288 /* 0xfe782288 */
 #define INT2SMSKCR1	0x8228c /* 0xfe78228c */
 
 #define INT2NTSR0	0x00018 /* 0xfe700018 */
 #define INT2NTSR1	0x0002c /* 0xfe70002c */
-void __init r8a7778_init_irq_dt(void)
+
+static void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
-#endif
 
 	BUG_ON(!base);
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
 	irqchip_init();
-#endif
+
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -615,7 +61,7 @@ void __init r8a7778_init_irq_dt(void)
 	iounmap(base);
 }
 
-static const char *r8a7778_compat_dt[] __initdata = {
+static const char *const r8a7778_compat_dt[] __initconst = {
 	"renesas,r8a7778",
 	NULL,
 };
@@ -624,10 +70,6 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
 	.init_late	= shmobile_init_late,
-#ifdef CONFIG_COMMON_CLK
 	.init_time	= r8a7778_timer_init,
-#endif
 	.dt_compat	= r8a7778_compat_dt,
 MACHINE_END
-
-#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index c03e562be..0007ff51d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -14,37 +14,17 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#include <linux/kernel.h>
+#include <linux/clk/renesas.h>
+#include <linux/clocksource.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/dma-rcar-hpbdma.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/dma-mapping.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/pm_runtime.h>
 
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
-#include "irqs.h"
 #include "r8a7779.h"
 
 static struct map_desc r8a7779_io_desc[] __initdata = {
@@ -64,7 +44,7 @@ static struct map_desc r8a7779_io_desc[] __initdata = {
 	},
 };
 
-void __init r8a7779_map_io(void)
+static void __init r8a7779_map_io(void)
 {
 	debug_ll_io_init();
 	iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
@@ -80,652 +60,10 @@ void __init r8a7779_map_io(void)
 #define INT2NTSR0 IOMEM(0xfe700060)
 #define INT2NTSR1 IOMEM(0xfe700064)
 
-static struct renesas_intc_irqpin_config irqpin0_platform_data __initdata = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
-	.sense_bitfield_width = 2,
-};
-
-static struct resource irqpin0_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
-	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
-	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
-	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
-	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
-	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
-};
-
-void __init r8a7779_init_irq_extpin_dt(int irlm)
-{
-	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
-	u32 tmp;
-
-	if (!icr0) {
-		pr_warn("r8a7779: unable to setup external irq pin mode\n");
-		return;
-	}
-
-	tmp = ioread32(icr0);
-	if (irlm)
-		tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
-	else
-		tmp &= ~(1 << 23); /* IRL mode - not supported */
-	tmp |= (1 << 21); /* LVLMODE = 1 */
-	iowrite32(tmp, icr0);
-	iounmap(icr0);
-}
-
-void __init r8a7779_init_irq_extpin(int irlm)
-{
-	r8a7779_init_irq_extpin_dt(irlm);
-	if (irlm)
-		platform_device_register_resndata(
-			NULL, "renesas_intc_irqpin", -1,
-			irqpin0_resources, ARRAY_SIZE(irqpin0_resources),
-			&irqpin0_platform_data, sizeof(irqpin0_platform_data));
-}
-
-/* PFC/GPIO */
-static struct resource r8a7779_pfc_resources[] = {
-	DEFINE_RES_MEM(0xfffc0000, 0x023c),
-};
-
-static struct platform_device r8a7779_pfc_device = {
-	.name		= "pfc-r8a7779",
-	.id		= -1,
-	.resource	= r8a7779_pfc_resources,
-	.num_resources	= ARRAY_SIZE(r8a7779_pfc_resources),
-};
-
-#define R8A7779_GPIO(idx, npins) \
-static struct resource r8a7779_gpio##idx##_resources[] = {		\
-	DEFINE_RES_MEM(0xffc40000 + (0x1000 * (idx)), 0x002c),		\
-	DEFINE_RES_IRQ(gic_iid(0xad + (idx))),				\
-};									\
-									\
-static struct gpio_rcar_config r8a7779_gpio##idx##_platform_data = {	\
-	.gpio_base	= 32 * (idx),					\
-	.irq_base	= 0,						\
-	.number_of_pins	= npins,					\
-	.pctl_name	= "pfc-r8a7779",				\
-};									\
-									\
-static struct platform_device r8a7779_gpio##idx##_device = {		\
-	.name		= "gpio_rcar",					\
-	.id		= idx,						\
-	.resource	= r8a7779_gpio##idx##_resources,		\
-	.num_resources	= ARRAY_SIZE(r8a7779_gpio##idx##_resources),	\
-	.dev		= {						\
-		.platform_data	= &r8a7779_gpio##idx##_platform_data,	\
-	},								\
-}
-
-R8A7779_GPIO(0, 32);
-R8A7779_GPIO(1, 32);
-R8A7779_GPIO(2, 32);
-R8A7779_GPIO(3, 32);
-R8A7779_GPIO(4, 32);
-R8A7779_GPIO(5, 32);
-R8A7779_GPIO(6, 9);
-
-static struct platform_device *r8a7779_pinctrl_devices[] __initdata = {
-	&r8a7779_pfc_device,
-	&r8a7779_gpio0_device,
-	&r8a7779_gpio1_device,
-	&r8a7779_gpio2_device,
-	&r8a7779_gpio3_device,
-	&r8a7779_gpio4_device,
-	&r8a7779_gpio5_device,
-	&r8a7779_gpio6_device,
-};
-
-void __init r8a7779_pinmux_init(void)
-{
-	platform_add_devices(r8a7779_pinctrl_devices,
-			    ARRAY_SIZE(r8a7779_pinctrl_devices));
-}
-
-/* SCIF */
-#define R8A7779_SCIF(index, baseaddr, irq)			\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= PORT_SCIF,				\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-};								\
-								\
-static struct platform_device scif##index##_device = {		\
-	.name		= "sh-sci",				\
-	.id		= index,				\
-	.resource	= scif##index##_resources,		\
-	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
-	.dev		= {					\
-		.platform_data	= &scif##index##_platform_data,	\
-	},							\
-}
-
-R8A7779_SCIF(0, 0xffe40000, gic_iid(0x78));
-R8A7779_SCIF(1, 0xffe41000, gic_iid(0x79));
-R8A7779_SCIF(2, 0xffe42000, gic_iid(0x7a));
-R8A7779_SCIF(3, 0xffe43000, gic_iid(0x7b));
-R8A7779_SCIF(4, 0xffe44000, gic_iid(0x7c));
-R8A7779_SCIF(5, 0xffe45000, gic_iid(0x7d));
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(0xffd80000, 0x30),
-	DEFINE_RES_IRQ(gic_iid(0x40)),
-	DEFINE_RES_IRQ(gic_iid(0x41)),
-	DEFINE_RES_IRQ(gic_iid(0x42)),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-/* I2C */
-static struct resource rcar_i2c0_res[] = {
-	{
-		.start  = 0xffc70000,
-		.end    = 0xffc70fff,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = gic_iid(0x6f),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name		= "i2c-rcar",
-	.id		= 0,
-	.resource	= rcar_i2c0_res,
-	.num_resources	= ARRAY_SIZE(rcar_i2c0_res),
-};
-
-static struct resource rcar_i2c1_res[] = {
-	{
-		.start  = 0xffc71000,
-		.end    = 0xffc71fff,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = gic_iid(0x72),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c1_device = {
-	.name		= "i2c-rcar",
-	.id		= 1,
-	.resource	= rcar_i2c1_res,
-	.num_resources	= ARRAY_SIZE(rcar_i2c1_res),
-};
-
-static struct resource rcar_i2c2_res[] = {
-	{
-		.start  = 0xffc72000,
-		.end    = 0xffc72fff,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = gic_iid(0x70),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c2_device = {
-	.name		= "i2c-rcar",
-	.id		= 2,
-	.resource	= rcar_i2c2_res,
-	.num_resources	= ARRAY_SIZE(rcar_i2c2_res),
-};
-
-static struct resource rcar_i2c3_res[] = {
-	{
-		.start  = 0xffc73000,
-		.end    = 0xffc73fff,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = gic_iid(0x71),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c3_device = {
-	.name		= "i2c-rcar",
-	.id		= 3,
-	.resource	= rcar_i2c3_res,
-	.num_resources	= ARRAY_SIZE(rcar_i2c3_res),
-};
-
-static struct resource sata_resources[] = {
-	[0] = {
-		.name	= "rcar-sata",
-		.start	= 0xfc600000,
-		.end	= 0xfc601fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x84),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sata_device = {
-	.name		= "sata_rcar",
-	.id		= -1,
-	.resource	= sata_resources,
-	.num_resources	= ARRAY_SIZE(sata_resources),
-	.dev		= {
-		.dma_mask		= &sata_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-/* USB */
-static struct usb_phy *phy;
-
-static int usb_power_on(struct platform_device *pdev)
-{
-	if (IS_ERR(phy))
-		return PTR_ERR(phy);
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	usb_phy_init(phy);
-
-	return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
-	if (IS_ERR(phy))
-		return;
-
-	usb_phy_shutdown(phy);
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-
-static int ehci_init_internal_buffer(struct usb_hcd *hcd)
+static void __init r8a7779_init_irq_dt(void)
 {
-	/*
-	 * Below are recommended values from the datasheet;
-	 * see [USB :: Setting of EHCI Internal Buffer].
-	 */
-	/* EHCI IP internal buffer setting */
-	iowrite32(0x00ff0040, hcd->regs + 0x0094);
-	/* EHCI IP internal buffer enable */
-	iowrite32(0x00000001, hcd->regs + 0x009C);
-
-	return 0;
-}
-
-static struct usb_ehci_pdata ehcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-	.pre_setup	= ehci_init_internal_buffer,
-};
-
-static struct resource ehci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70000,
-		.end	= 0xffe70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci0_device = {
-	.name	= "ehci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci0_resources),
-	.resource	= ehci0_resources,
-};
-
-static struct resource ehci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70000,
-		.end	= 0xfff70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci1_device = {
-	.name	= "ehci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci1_resources),
-	.resource	= ehci1_resources,
-};
-
-static struct usb_ohci_pdata ohcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ohci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70400,
-		.end	= 0xffe70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci0_device = {
-	.name	= "ohci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci0_resources),
-	.resource	= ohci0_resources,
-};
-
-static struct resource ohci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70400,
-		.end	= 0xfff70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci1_device = {
-	.name	= "ohci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci1_resources),
-	.resource	= ohci1_resources,
-};
-
-/* HPB-DMA */
-
-/* Asynchronous mode register bits */
-#define HPB_DMAE_ASYNCMDR_ASMD43_MASK		BIT(23)	/* MMC1 */
-#define HPB_DMAE_ASYNCMDR_ASMD43_SINGLE		BIT(23)	/* MMC1 */
-#define HPB_DMAE_ASYNCMDR_ASMD43_MULTI		0	/* MMC1 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD43_MASK		BIT(22)	/* MMC1 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD43_BURST	BIT(22)	/* MMC1 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD43_NBURST	0	/* MMC1 */
-#define HPB_DMAE_ASYNCMDR_ASMD24_MASK		BIT(21)	/* MMC0 */
-#define HPB_DMAE_ASYNCMDR_ASMD24_SINGLE		BIT(21)	/* MMC0 */
-#define HPB_DMAE_ASYNCMDR_ASMD24_MULTI		0	/* MMC0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD24_MASK		BIT(20)	/* MMC0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD24_BURST	BIT(20)	/* MMC0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD24_NBURST	0	/* MMC0 */
-#define HPB_DMAE_ASYNCMDR_ASMD41_MASK		BIT(19)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASMD41_SINGLE		BIT(19)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASMD41_MULTI		0	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD41_MASK		BIT(18)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD41_BURST	BIT(18)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD41_NBURST	0	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASMD40_MASK		BIT(17)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASMD40_SINGLE		BIT(17)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASMD40_MULTI		0	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD40_MASK		BIT(16)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD40_BURST	BIT(16)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD40_NBURST	0	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASMD39_MASK		BIT(15)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASMD39_SINGLE		BIT(15)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASMD39_MULTI		0	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD39_MASK		BIT(14)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD39_BURST	BIT(14)	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD39_NBURST	0	/* SDHI3 */
-#define HPB_DMAE_ASYNCMDR_ASMD27_MASK		BIT(13)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASMD27_SINGLE		BIT(13)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASMD27_MULTI		0	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD27_MASK		BIT(12)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD27_BURST	BIT(12)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD27_NBURST	0	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASMD26_MASK		BIT(11)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASMD26_SINGLE		BIT(11)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASMD26_MULTI		0	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD26_MASK		BIT(10)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD26_BURST	BIT(10)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD26_NBURST	0	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASMD25_MASK		BIT(9)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASMD25_SINGLE		BIT(9)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASMD25_MULTI		0	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD25_MASK		BIT(8)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD25_BURST	BIT(8)	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD25_NBURST	0	/* SDHI2 */
-#define HPB_DMAE_ASYNCMDR_ASMD23_MASK		BIT(7)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD23_SINGLE		BIT(7)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD23_MULTI		0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD23_MASK		BIT(6)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD23_BURST	BIT(6)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD23_NBURST	0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MASK		BIT(5)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE		BIT(5)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI		0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD22_MASK		BIT(4)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD22_BURST	BIT(4)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST	0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MASK		BIT(3)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE		BIT(3)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI		0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD21_MASK		BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD21_BURST	BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST	0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD20_MASK		BIT(1)	/* SDHI1 */
-#define HPB_DMAE_ASYNCMDR_ASMD20_SINGLE		BIT(1)	/* SDHI1 */
-#define HPB_DMAE_ASYNCMDR_ASMD20_MULTI		0	/* SDHI1 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD20_MASK		BIT(0)	/* SDHI1 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD20_BURST	BIT(0)	/* SDHI1 */
-#define HPB_DMAE_ASYNCMDR_ASBTMD20_NBURST	0	/* SDHI1 */
-
-static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
-	{
-		.id	= HPBDMA_SLAVE_SDHI0_TX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DMDL |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_SINGLE |
-			  HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK |
-			  HPB_DMAE_ASYNCMDR_ASBTMD21_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 21,
-	}, {
-		.id	= HPBDMA_SLAVE_SDHI0_RX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SMDL |
-			  HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_SINGLE |
-			  HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK |
-			  HPB_DMAE_ASYNCMDR_ASBTMD22_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 22,
-	},
-};
-
-static const struct hpb_dmae_channel hpb_dmae_channels[] = {
-	HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
-	HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
-};
-
-static struct hpb_dmae_pdata dma_platform_data __initdata = {
-	.slaves			= hpb_dmae_slaves,
-	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
-	.channels		= hpb_dmae_channels,
-	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
-	.ts_shift		= {
-		[XMIT_SZ_8BIT]	= 0,
-		[XMIT_SZ_16BIT]	= 1,
-		[XMIT_SZ_32BIT]	= 2,
-	},
-	.num_hw_channels	= 44,
-};
-
-static struct resource hpb_dmae_resources[] __initdata = {
-	/* Channel registers */
-	DEFINE_RES_MEM(0xffc08000, 0x1000),
-	/* Common registers */
-	DEFINE_RES_MEM(0xffc09000, 0x170),
-	/* Asynchronous reset registers */
-	DEFINE_RES_MEM(0xffc00300, 4),
-	/* Asynchronous mode registers */
-	DEFINE_RES_MEM(0xffc00400, 4),
-	/* IRQ for DMA channels */
-	DEFINE_RES_NAMED(gic_iid(0x8e), 12, NULL, IORESOURCE_IRQ),
-};
-
-static void __init r8a7779_register_hpb_dmae(void)
-{
-	platform_device_register_resndata(NULL, "hpb-dma-engine",
-					  -1, hpb_dmae_resources,
-					  ARRAY_SIZE(hpb_dmae_resources),
-					  &dma_platform_data,
-					  sizeof(dma_platform_data));
-}
-
-static struct platform_device *r8a7779_early_devices[] __initdata = {
-	&tmu0_device,
-};
-
-static struct platform_device *r8a7779_standard_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-	&i2c3_device,
-	&sata_device,
-};
-
-void __init r8a7779_add_standard_devices(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*16way */
-	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
-#endif
-	r8a7779_pm_init();
-
-	r8a7779_init_pm_domains();
-
-	platform_add_devices(r8a7779_early_devices,
-			    ARRAY_SIZE(r8a7779_early_devices));
-	platform_add_devices(r8a7779_standard_devices,
-			    ARRAY_SIZE(r8a7779_standard_devices));
-	r8a7779_register_hpb_dmae();
-}
-
-void __init r8a7779_add_early_devices(void)
-{
-	early_platform_add_devices(r8a7779_early_devices,
-				   ARRAY_SIZE(r8a7779_early_devices));
-
-	/* Early serial console setup is not included here due to
-	 * memory map collisions. The SCIF serial ports in r8a7779
-	 * are difficult to identity map 1:1 due to collision with the
-	 * virtual memory range used by the coherent DMA code on ARM.
-	 *
-	 * Anyone wanting to debug early can remove UPF_IOREMAP from
-	 * the sh-sci serial console platform data, adjust mapbase
-	 * to a static M:N virt:phys mapping that needs to be added to
-	 * the mappings passed with iotable_init() above.
-	 *
-	 * Then add a call to shmobile_setup_console() from this function.
-	 *
-	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
-	 * command line in case of the marzen board.
-	 */
-}
-
-static struct platform_device *r8a7779_late_devices[] __initdata = {
-	&ehci0_device,
-	&ehci1_device,
-	&ohci0_device,
-	&ohci1_device,
-};
-
-void __init r8a7779_init_late(void)
-{
-	/* get USB PHY */
-	phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
-	shmobile_init_late();
-	platform_add_devices(r8a7779_late_devices,
-			     ARRAY_SIZE(r8a7779_late_devices));
-}
-
-#ifdef CONFIG_USE_OF
-void __init r8a7779_init_irq_dt(void)
-{
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	void __iomem *gic_dist_base = ioremap_nocache(0xf0001000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xf0000100, 0x1000);
-#endif
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE);
-
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
 	irqchip_init();
-#endif
+
 	/* route all interrupts to ARM */
 	__raw_writel(0xffffffff, INT2NTSR0);
 	__raw_writel(0x3fffffff, INT2NTSR1);
@@ -740,7 +78,7 @@ void __init r8a7779_init_irq_dt(void)
 
 #define MODEMR		0xffcc0020
 
-u32 __init r8a7779_read_mode_pins(void)
+static u32 __init r8a7779_read_mode_pins(void)
 {
 	static u32 mode;
 	static bool mode_valid;
@@ -756,16 +94,23 @@ u32 __init r8a7779_read_mode_pins(void)
 	return mode;
 }
 
-static const char *r8a7779_compat_dt[] __initdata = {
+static void __init r8a7779_init_time(void)
+{
+	r8a7779_clocks_init(r8a7779_read_mode_pins());
+	clocksource_probe();
+}
+
+static const char *const r8a7779_compat_dt[] __initconst = {
 	"renesas,r8a7779",
 	NULL,
 };
 
 DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
+	.smp		= smp_ops(r8a7779_smp_ops),
 	.map_io		= r8a7779_map_io,
 	.init_early	= shmobile_init_delay,
+	.init_time	= r8a7779_init_time,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7779_compat_dt,
 MACHINE_END
-#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 3a18af492..3506327e0 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -28,6 +28,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
+	.smp_init	= shmobile_smp_init_fallback_ops,
 	.smp		= smp_ops(r8a7790_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index ef8eb3af5..110e8b588 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -23,12 +23,13 @@
 #include "r8a7791.h"
 #include "rcar-gen2.h"
 
-static const char *r8a7791_boards_compat_dt[] __initdata = {
+static const char *const r8a7791_boards_compat_dt[] __initconst = {
 	"renesas,r8a7791",
 	NULL,
 };
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+	.smp_init	= shmobile_smp_init_fallback_ops,
 	.smp		= smp_ops(r8a7791_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
diff --git a/arch/arm/mach-shmobile/setup-r8a7792.c b/arch/arm/mach-shmobile/setup-r8a7792.c
new file mode 100644
index 000000000..a0910395d
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7792.c
@@ -0,0 +1,35 @@
+/*
+ * r8a7792 processor support
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+#include "rcar-gen2.h"
+
+static const char * const r8a7792_boards_compat_dt[] __initconst = {
+	"renesas,r8a7792",
+	NULL,
+};
+
+DT_MACHINE_START(R8A7792_DT, "Generic R8A7792 (Flattened Device Tree)")
+	.init_early	= shmobile_init_delay,
+	.init_late	= shmobile_init_late,
+	.init_time	= rcar_gen2_timer_init,
+	.reserve	= rcar_gen2_reserve,
+	.dt_compat	= r8a7792_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/setup-r8a7793.c
index e329ccbd0..5fce87f7f 100644
--- a/arch/arm/mach-shmobile/console.c
+++ b/arch/arm/mach-shmobile/setup-r8a7793.c
@@ -1,7 +1,7 @@
 /*
- * SH-Mobile Console
+ * r8a7793 processor support
  *
- * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2015  Ulrich Hecht
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -12,16 +12,22 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#include <linux/kernel.h>
+
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
 #include "common.h"
+#include "rcar-gen2.h"
 
-void __init shmobile_setup_console(void)
-{
-	parse_early_param();
+static const char * const r8a7793_boards_compat_dt[] __initconst = {
+	"renesas,r8a7793",
+	NULL,
+};
 
-	/* Let earlyprintk output early console messages */
-	early_platform_driver_probe("earlyprintk", 1, 1);
-}
+DT_MACHINE_START(R8A7793_DT, "Generic R8A7793 (Flattened Device Tree)")
+	.init_early	= shmobile_init_delay,
+	.init_time	= rcar_gen2_timer_init,
+	.init_late	= shmobile_init_late,
+	.reserve	= rcar_gen2_reserve,
+	.dt_compat	= r8a7793_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 5d13595aa..afb9fdcd3 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -15,7 +15,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/clk/shmobile.h>
+#include <linux/clk/renesas.h>
 #include <linux/clocksource.h>
 #include <linux/device.h>
 #include <linux/dma-contiguous.h>
@@ -46,6 +46,26 @@ u32 rcar_gen2_read_mode_pins(void)
 	return mode;
 }
 
+static unsigned int __init get_extal_freq(void)
+{
+	struct device_node *cpg, *extal;
+	u32 freq = 20000000;
+
+	cpg = of_find_compatible_node(NULL, NULL,
+				      "renesas,rcar-gen2-cpg-clocks");
+	if (!cpg)
+		return freq;
+
+	extal = of_parse_phandle(cpg, "clocks", 0);
+	of_node_put(cpg);
+	if (!extal)
+		return freq;
+
+	of_property_read_u32(extal, "clock-frequency", &freq);
+	of_node_put(extal);
+	return freq;
+}
+
 #define CNTCR 0
 #define CNTFID0 0x20
 
@@ -54,10 +74,10 @@ void __init rcar_gen2_timer_init(void)
 	u32 mode = rcar_gen2_read_mode_pins();
 #ifdef CONFIG_ARM_ARCH_TIMER
 	void __iomem *base;
-	int extal_mhz = 0;
 	u32 freq;
 
-	if (of_machine_is_compatible("renesas,r8a7794")) {
+	if (of_machine_is_compatible("renesas,r8a7792") ||
+	    of_machine_is_compatible("renesas,r8a7794")) {
 		freq = 260000000 / 8;	/* ZS / 8 */
 		/* CNTVOFF has to be initialized either from non-secure
 		 * Hypervisor mode or secure Monitor mode with SCR.NS==1.
@@ -82,26 +102,9 @@ void __init rcar_gen2_timer_init(void)
 		 * with the counter disabled. Moreover, it may also report
 		 * a potentially incorrect fixed 13 MHz frequency. To be
 		 * correct these registers need to be updated to use the
-		 * frequency EXTAL / 2 which can be determined by the MD pins.
+		 * frequency EXTAL / 2.
 		 */
-
-		switch (mode & (MD(14) | MD(13))) {
-		case 0:
-			extal_mhz = 15;
-			break;
-		case MD(13):
-			extal_mhz = 20;
-			break;
-		case MD(14):
-			extal_mhz = 26;
-			break;
-		case MD(13) | MD(14):
-			extal_mhz = 30;
-			break;
-		}
-
-		/* The arch timer frequency equals EXTAL / 2 */
-		freq = extal_mhz * (1000000 / 2);
+		freq = get_extal_freq() / 2;
 	}
 
 	/* Remap "armgcnt address map" space */
@@ -128,9 +131,7 @@ void __init rcar_gen2_timer_init(void)
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
 	rcar_gen2_clocks_init(mode);
-#ifdef CONFIG_ARCH_SHMOBILE_MULTI
-	clocksource_of_init();
-#endif
+	clocksource_probe();
 }
 
 struct memory_reserve_config {
@@ -184,8 +185,6 @@ static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname,
 	return 0;
 }
 
-struct cma *rcar_gen2_dma_contiguous;
-
 void __init rcar_gen2_reserve(void)
 {
 	struct memory_reserve_config mrc;
@@ -196,8 +195,11 @@ void __init rcar_gen2_reserve(void)
 
 	of_scan_flat_dt(rcar_gen2_scan_mem, &mrc);
 #ifdef CONFIG_DMA_CMA
-	if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size))
+	if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) {
+		static struct cma *rcar_gen2_dma_contiguous;
+
 		dma_contiguous_reserve_area(mrc.size, mrc.base, 0,
 					    &rcar_gen2_dma_contiguous, true);
+	}
 #endif
 }
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index fb2ab7590..a25ff188e 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -18,28 +18,16 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/input.h>
-#include <linux/i2c/i2c-sh_mobile.h>
 #include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/platform_data/sh_ipmmu.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
 
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "common.h"
-#include "dma-register.h"
-#include "intc.h"
-#include "irqs.h"
 #include "sh73a0.h"
 
 static struct map_desc sh73a0_io_desc[] __initdata = {
@@ -54,747 +42,21 @@ static struct map_desc sh73a0_io_desc[] __initdata = {
 	},
 };
 
-void __init sh73a0_map_io(void)
+static void __init sh73a0_map_io(void)
 {
 	debug_ll_io_init();
 	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
 }
 
-/* PFC */
-static struct resource pfc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xe6050000, 0x8000),
-	DEFINE_RES_MEM(0xe605801c, 0x000c),
-};
-
-void __init sh73a0_pinmux_init(void)
-{
-	platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
-					ARRAY_SIZE(pfc_resources));
-}
-
-/* SCIF */
-#define SH73A0_SCIF(scif_type, index, baseaddr, irq)		\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= scif_type,				\
-	.flags		= UPF_BOOT_AUTOCONF,			\
-	.scscr		= SCSCR_RE | SCSCR_TE,			\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-};								\
-								\
-static struct platform_device scif##index##_device = {		\
-	.name		= "sh-sci",				\
-	.id		= index,				\
-	.resource	= scif##index##_resources,		\
-	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
-	.dev		= {					\
-		.platform_data	= &scif##index##_platform_data,	\
-	},							\
-}
-
-SH73A0_SCIF(PORT_SCIFA, 0, 0xe6c40000, gic_spi(72));
-SH73A0_SCIF(PORT_SCIFA, 1, 0xe6c50000, gic_spi(73));
-SH73A0_SCIF(PORT_SCIFA, 2, 0xe6c60000, gic_spi(74));
-SH73A0_SCIF(PORT_SCIFA, 3, 0xe6c70000, gic_spi(75));
-SH73A0_SCIF(PORT_SCIFA, 4, 0xe6c80000, gic_spi(78));
-SH73A0_SCIF(PORT_SCIFA, 5, 0xe6cb0000, gic_spi(79));
-SH73A0_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(156));
-SH73A0_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(143));
-SH73A0_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(80));
-
-static struct sh_timer_config cmt1_platform_data = {
-	.channels_mask = 0x3f,
-};
-
-static struct resource cmt1_resources[] = {
-	DEFINE_RES_MEM(0xe6138000, 0x200),
-	DEFINE_RES_IRQ(gic_spi(65)),
-};
-
-static struct platform_device cmt1_device = {
-	.name		= "sh-cmt-48",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &cmt1_platform_data,
-	},
-	.resource	= cmt1_resources,
-	.num_resources	= ARRAY_SIZE(cmt1_resources),
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(0xfff60000, 0x2c),
-	DEFINE_RES_IRQ(intcs_evt2irq(0xe80)),
-	DEFINE_RES_IRQ(intcs_evt2irq(0xea0)),
-	DEFINE_RES_IRQ(intcs_evt2irq(0xec0)),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-static struct resource i2c0_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6820000, 0x426),
-	[1] = {
-		.start	= gic_spi(167),
-		.end	= gic_spi(170),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6822000, 0x426),
-	[1] = {
-		.start	= gic_spi(51),
-		.end	= gic_spi(54),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c2_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6824000, 0x426),
-	[1] = {
-		.start	= gic_spi(171),
-		.end	= gic_spi(174),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c3_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6826000, 0x426),
-	[1] = {
-		.start	= gic_spi(183),
-		.end	= gic_spi(186),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c4_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6828000, 0x426),
-	[1] = {
-		.start	= gic_spi(187),
-		.end	= gic_spi(190),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct i2c_sh_mobile_platform_data i2c_platform_data = {
-	.clks_per_count	= 2,
-};
-
-static struct platform_device i2c0_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 0,
-	.resource	= i2c0_resources,
-	.num_resources	= ARRAY_SIZE(i2c0_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c1_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 1,
-	.resource	= i2c1_resources,
-	.num_resources	= ARRAY_SIZE(i2c1_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c2_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 2,
-	.resource	= i2c2_resources,
-	.num_resources	= ARRAY_SIZE(i2c2_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c3_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 3,
-	.resource	= i2c3_resources,
-	.num_resources	= ARRAY_SIZE(i2c3_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c4_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 4,
-	.resource	= i2c4_resources,
-	.num_resources	= ARRAY_SIZE(i2c4_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
-		.addr		= 0xe6c40020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x21,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
-		.addr		= 0xe6c40024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x22,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
-		.addr		= 0xe6c50020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x25,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
-		.addr		= 0xe6c50024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x26,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
-		.addr		= 0xe6c60020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x29,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
-		.addr		= 0xe6c60024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
-		.addr		= 0xe6c70020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
-		.addr		= 0xe6c70024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
-		.addr		= 0xe6c80020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x39,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
-		.addr		= 0xe6c80024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
-		.addr		= 0xe6cb0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x35,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
-		.addr		= 0xe6cb0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x36,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_TX,
-		.addr		= 0xe6cc0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_RX,
-		.addr		= 0xe6cc0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF7_TX,
-		.addr		= 0xe6cd0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x19,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF7_RX,
-		.addr		= 0xe6cd0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF8_TX,
-		.addr		= 0xe6c30040,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF8_RX,
-		.addr		= 0xe6c30060,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
-		.addr		= 0xee100030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
-		.addr		= 0xee100030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
-		.addr		= 0xee120030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc9,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
-		.addr		= 0xee120030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xca,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
-		.addr		= 0xee140030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xcd,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
-		.addr		= 0xee140030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xce,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd2,
-	},
-};
-
-#define DMAE_CHANNEL(_offset)					\
-	{							\
-		.offset         = _offset - 0x20,		\
-		.dmars          = _offset - 0x20 + 0x40,	\
-	}
-
-static const struct sh_dmae_channel sh73a0_dmae_channels[] = {
-	DMAE_CHANNEL(0x8000),
-	DMAE_CHANNEL(0x8080),
-	DMAE_CHANNEL(0x8100),
-	DMAE_CHANNEL(0x8180),
-	DMAE_CHANNEL(0x8200),
-	DMAE_CHANNEL(0x8280),
-	DMAE_CHANNEL(0x8300),
-	DMAE_CHANNEL(0x8380),
-	DMAE_CHANNEL(0x8400),
-	DMAE_CHANNEL(0x8480),
-	DMAE_CHANNEL(0x8500),
-	DMAE_CHANNEL(0x8580),
-	DMAE_CHANNEL(0x8600),
-	DMAE_CHANNEL(0x8680),
-	DMAE_CHANNEL(0x8700),
-	DMAE_CHANNEL(0x8780),
-	DMAE_CHANNEL(0x8800),
-	DMAE_CHANNEL(0x8880),
-	DMAE_CHANNEL(0x8900),
-	DMAE_CHANNEL(0x8980),
-};
-
-static struct sh_dmae_pdata sh73a0_dmae_platform_data = {
-	.slave          = sh73a0_dmae_slaves,
-	.slave_num      = ARRAY_SIZE(sh73a0_dmae_slaves),
-	.channel        = sh73a0_dmae_channels,
-	.channel_num    = ARRAY_SIZE(sh73a0_dmae_channels),
-	.ts_low_shift   = TS_LOW_SHIFT,
-	.ts_low_mask    = TS_LOW_BIT << TS_LOW_SHIFT,
-	.ts_high_shift  = TS_HI_SHIFT,
-	.ts_high_mask   = TS_HI_BIT << TS_HI_SHIFT,
-	.ts_shift       = dma_ts_shift,
-	.ts_shift_num   = ARRAY_SIZE(dma_ts_shift),
-	.dmaor_init     = DMAOR_DME,
-};
-
-static struct resource sh73a0_dmae_resources[] = {
-	DEFINE_RES_MEM(0xfe000020, 0x89e0),
-	{
-		.name	= "error_irq",
-		.start  = gic_spi(129),
-		.end    = gic_spi(129),
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-19 */
-		.start  = gic_spi(109),
-		.end    = gic_spi(128),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 0,
-	.resource	= sh73a0_dmae_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_dmae_resources),
-	.dev		= {
-		.platform_data	= &sh73a0_dmae_platform_data,
-	},
-};
-
-/* MPDMAC */
-static const struct sh_dmae_slave_config sh73a0_mpdma_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_FSI2A_RX,
-		.addr		= 0xec230020,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd6, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2A_TX,
-		.addr		= 0xec230024,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd5, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2C_RX,
-		.addr		= 0xec230060,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xda, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2C_TX,
-		.addr		= 0xec230064,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd9, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2B_RX,
-		.addr		= 0xec240020,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0x8e, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2B_TX,
-		.addr		= 0xec240024,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0x8d, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2D_RX,
-		.addr		=  0xec240060,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0x9a, /* CHECK ME */
-	},
-};
-
-#define MPDMA_CHANNEL(a, b, c)			\
-{						\
-	.offset		= a,			\
-	.dmars		= b,			\
-	.dmars_bit	= c,			\
-	.chclr_offset	= (0x220 - 0x20) + a	\
-}
-
-static const struct sh_dmae_channel sh73a0_mpdma_channels[] = {
-	MPDMA_CHANNEL(0x00, 0, 0),
-	MPDMA_CHANNEL(0x10, 0, 8),
-	MPDMA_CHANNEL(0x20, 4, 0),
-	MPDMA_CHANNEL(0x30, 4, 8),
-	MPDMA_CHANNEL(0x50, 8, 0),
-	MPDMA_CHANNEL(0x70, 8, 8),
-};
-
-static struct sh_dmae_pdata sh73a0_mpdma_platform_data = {
-	.slave		= sh73a0_mpdma_slaves,
-	.slave_num	= ARRAY_SIZE(sh73a0_mpdma_slaves),
-	.channel	= sh73a0_mpdma_channels,
-	.channel_num	= ARRAY_SIZE(sh73a0_mpdma_channels),
-	.ts_low_shift	= TS_LOW_SHIFT,
-	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
-	.ts_high_shift	= TS_HI_SHIFT,
-	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
-	.ts_shift	= dma_ts_shift,
-	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chclr_present	= 1,
-};
-
-/* Resource order important! */
-static struct resource sh73a0_mpdma_resources[] = {
-	/* Channel registers and DMAOR */
-	DEFINE_RES_MEM(0xec618020, 0x270),
-	/* DMARSx */
-	DEFINE_RES_MEM(0xec619000, 0xc),
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(181),
-		.end	= gic_spi(181),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(175),
-		.end	= gic_spi(180),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpdma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 1,
-	.resource	= sh73a0_mpdma_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_mpdma_resources),
-	.dev		= {
-		.platform_data	= &sh73a0_mpdma_platform_data,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= gic_spi(55),
-		.end	= gic_spi(55),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= gic_spi(56),
-		.end	= gic_spi(56),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name		= "armv7-pmu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pmu_resources),
-	.resource	= pmu_resources,
-};
-
-/* an IPMMU module for ICB */
-static struct resource ipmmu_resources[] = {
-	DEFINE_RES_MEM(0xfe951000, 0x100),
-};
-
-static const char * const ipmmu_dev_names[] = {
-	"sh_mobile_lcdc_fb.0",
-};
-
-static struct shmobile_ipmmu_platform_data ipmmu_platform_data = {
-	.dev_names = ipmmu_dev_names,
-	.num_dev_names = ARRAY_SIZE(ipmmu_dev_names),
-};
-
-static struct platform_device ipmmu_device = {
-	.name           = "ipmmu",
-	.id             = -1,
-	.dev = {
-		.platform_data = &ipmmu_platform_data,
-	},
-	.resource       = ipmmu_resources,
-	.num_resources  = ARRAY_SIZE(ipmmu_resources),
-};
-
-static struct renesas_intc_irqpin_config irqpin0_platform_data = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
-	.control_parent = true,
-};
-
-static struct resource irqpin0_resources[] = {
-	DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */
-	DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */
-	DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */
-	DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */
-	DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */
-	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(4)), /* IRQ3 */
-	DEFINE_RES_IRQ(gic_spi(5)), /* IRQ4 */
-	DEFINE_RES_IRQ(gic_spi(6)), /* IRQ5 */
-	DEFINE_RES_IRQ(gic_spi(7)), /* IRQ6 */
-	DEFINE_RES_IRQ(gic_spi(8)), /* IRQ7 */
-};
-
-static struct platform_device irqpin0_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 0,
-	.resource	= irqpin0_resources,
-	.num_resources	= ARRAY_SIZE(irqpin0_resources),
-	.dev		= {
-		.platform_data	= &irqpin0_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin1_platform_data = {
-	.irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */
-	.control_parent = true, /* Disable spurious IRQ10 */
-};
-
-static struct resource irqpin1_resources[] = {
-	DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */
-	DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */
-	DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */
-	DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */
-	DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */
-	DEFINE_RES_IRQ(gic_spi(9)), /* IRQ8 */
-	DEFINE_RES_IRQ(gic_spi(10)), /* IRQ9 */
-	DEFINE_RES_IRQ(gic_spi(11)), /* IRQ10 */
-	DEFINE_RES_IRQ(gic_spi(12)), /* IRQ11 */
-	DEFINE_RES_IRQ(gic_spi(13)), /* IRQ12 */
-	DEFINE_RES_IRQ(gic_spi(14)), /* IRQ13 */
-	DEFINE_RES_IRQ(gic_spi(15)), /* IRQ14 */
-	DEFINE_RES_IRQ(gic_spi(16)), /* IRQ15 */
-};
-
-static struct platform_device irqpin1_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 1,
-	.resource	= irqpin1_resources,
-	.num_resources	= ARRAY_SIZE(irqpin1_resources),
-	.dev		= {
-		.platform_data	= &irqpin1_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin2_platform_data = {
-	.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
-	.control_parent = true,
-};
-
-static struct resource irqpin2_resources[] = {
-	DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */
-	DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI20A */
-	DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ20A */
-	DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK20A */
-	DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR20A */
-	DEFINE_RES_IRQ(gic_spi(17)), /* IRQ16 */
-	DEFINE_RES_IRQ(gic_spi(18)), /* IRQ17 */
-	DEFINE_RES_IRQ(gic_spi(19)), /* IRQ18 */
-	DEFINE_RES_IRQ(gic_spi(20)), /* IRQ19 */
-	DEFINE_RES_IRQ(gic_spi(21)), /* IRQ20 */
-	DEFINE_RES_IRQ(gic_spi(22)), /* IRQ21 */
-	DEFINE_RES_IRQ(gic_spi(23)), /* IRQ22 */
-	DEFINE_RES_IRQ(gic_spi(24)), /* IRQ23 */
-};
-
-static struct platform_device irqpin2_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 2,
-	.resource	= irqpin2_resources,
-	.num_resources	= ARRAY_SIZE(irqpin2_resources),
-	.dev		= {
-		.platform_data	= &irqpin2_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin3_platform_data = {
-	.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
-	.control_parent = true,
-};
-
-static struct resource irqpin3_resources[] = {
-	DEFINE_RES_MEM(0xe690000c, 4), /* ICR4A */
-	DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */
-	DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */
-	DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */
-	DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */
-	DEFINE_RES_IRQ(gic_spi(25)), /* IRQ24 */
-	DEFINE_RES_IRQ(gic_spi(26)), /* IRQ25 */
-	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ26 */
-	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ27 */
-	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ28 */
-	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ29 */
-	DEFINE_RES_IRQ(gic_spi(31)), /* IRQ30 */
-	DEFINE_RES_IRQ(gic_spi(32)), /* IRQ31 */
-};
-
-static struct platform_device irqpin3_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 3,
-	.resource	= irqpin3_resources,
-	.num_resources	= ARRAY_SIZE(irqpin3_resources),
-	.dev		= {
-		.platform_data	= &irqpin3_platform_data,
-	},
-};
-
-static struct platform_device *sh73a0_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&scif8_device,
-	&tmu0_device,
-	&ipmmu_device,
-	&cmt1_device,
-};
-
-static struct platform_device *sh73a0_late_devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-	&i2c3_device,
-	&i2c4_device,
-	&dma0_device,
-	&mpdma0_device,
-	&pmu_device,
-	&irqpin0_device,
-	&irqpin1_device,
-	&irqpin2_device,
-	&irqpin3_device,
-};
-
-#define SRCR2          IOMEM(0xe61580b0)
-
-void __init sh73a0_add_standard_devices(void)
-{
-	/* Clear software reset bit on SY-DMAC module */
-	__raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2);
-
-	platform_add_devices(sh73a0_early_devices,
-			    ARRAY_SIZE(sh73a0_early_devices));
-	platform_add_devices(sh73a0_late_devices,
-			    ARRAY_SIZE(sh73a0_late_devices));
-}
-
-/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
-void __init __weak sh73a0_register_twd(void) { }
-
-void __init sh73a0_earlytimer_init(void)
-{
-	shmobile_init_delay();
-#ifndef CONFIG_COMMON_CLK
-	sh73a0_clock_init();
-#endif
-	shmobile_earlytimer_init();
-	sh73a0_register_twd();
-}
-
-void __init sh73a0_add_early_devices(void)
-{
-	early_platform_add_devices(sh73a0_early_devices,
-				   ARRAY_SIZE(sh73a0_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-#ifdef CONFIG_USE_OF
-
 static void __init sh73a0_generic_init(void)
 {
 #ifdef CONFIG_CACHE_L2X0
 	/* Shared attribute override enable, 64K*8way */
 	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
 #endif
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char *sh73a0_boards_compat_dt[] __initdata = {
+static const char *const sh73a0_boards_compat_dt[] __initconst = {
 	"renesas,sh73a0",
 	NULL,
 };
@@ -807,4 +69,3 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END
-#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/sh-gpio.h b/arch/arm/mach-shmobile/sh-gpio.h
deleted file mode 100644
index 2c4141413..000000000
--- a/arch/arm/mach-shmobile/sh-gpio.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008  Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-/*
- * FIXME !!
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static inline void __init gpio_direction_none(void __iomem * addr)
-{
-	__raw_writeb(0x00, addr);
-}
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-shmobile/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h
index 5a80f18b4..50ef24f78 100644
--- a/arch/arm/mach-shmobile/sh73a0.h
+++ b/arch/arm/mach-shmobile/sh73a0.h
@@ -1,89 +1,6 @@
 #ifndef __ASM_SH73A0_H__
 #define __ASM_SH73A0_H__
 
-/* DMA slave IDs */
-enum {
-	SHDMA_SLAVE_INVALID,
-	SHDMA_SLAVE_SCIF0_TX,
-	SHDMA_SLAVE_SCIF0_RX,
-	SHDMA_SLAVE_SCIF1_TX,
-	SHDMA_SLAVE_SCIF1_RX,
-	SHDMA_SLAVE_SCIF2_TX,
-	SHDMA_SLAVE_SCIF2_RX,
-	SHDMA_SLAVE_SCIF3_TX,
-	SHDMA_SLAVE_SCIF3_RX,
-	SHDMA_SLAVE_SCIF4_TX,
-	SHDMA_SLAVE_SCIF4_RX,
-	SHDMA_SLAVE_SCIF5_TX,
-	SHDMA_SLAVE_SCIF5_RX,
-	SHDMA_SLAVE_SCIF6_TX,
-	SHDMA_SLAVE_SCIF6_RX,
-	SHDMA_SLAVE_SCIF7_TX,
-	SHDMA_SLAVE_SCIF7_RX,
-	SHDMA_SLAVE_SCIF8_TX,
-	SHDMA_SLAVE_SCIF8_RX,
-	SHDMA_SLAVE_SDHI0_TX,
-	SHDMA_SLAVE_SDHI0_RX,
-	SHDMA_SLAVE_SDHI1_TX,
-	SHDMA_SLAVE_SDHI1_RX,
-	SHDMA_SLAVE_SDHI2_TX,
-	SHDMA_SLAVE_SDHI2_RX,
-	SHDMA_SLAVE_MMCIF_TX,
-	SHDMA_SLAVE_MMCIF_RX,
-	SHDMA_SLAVE_FSI2A_TX,
-	SHDMA_SLAVE_FSI2A_RX,
-	SHDMA_SLAVE_FSI2B_TX,
-	SHDMA_SLAVE_FSI2B_RX,
-	SHDMA_SLAVE_FSI2C_TX,
-	SHDMA_SLAVE_FSI2C_RX,
-	SHDMA_SLAVE_FSI2D_RX,
-};
-
-/*
- *		SH73A0 IRQ LOCATION TABLE
- *
- * 416	-----------------------------------------
- *		IRQ0-IRQ15
- * 431	-----------------------------------------
- * ...
- * 448	-----------------------------------------
- *		sh73a0-intcs
- *		sh73a0-intca-irq-pins
- * 680	-----------------------------------------
- * ...
- * 700	-----------------------------------------
- *		sh73a0-pint0
- * 731	-----------------------------------------
- * 732	-----------------------------------------
- *		sh73a0-pint1
- * 739	-----------------------------------------
- * ...
- * 800	-----------------------------------------
- *		IRQ16-IRQ31
- * 815	-----------------------------------------
- * ...
- * 928	-----------------------------------------
- *		sh73a0-intca-irq-pins
- * 943	-----------------------------------------
- */
-
-/* PINT interrupts are located at Linux IRQ 700 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
-
-extern void sh73a0_init_irq(void);
-extern void sh73a0_init_irq_dt(void);
-extern void sh73a0_map_io(void);
-extern void sh73a0_earlytimer_init(void);
-extern void sh73a0_add_early_devices(void);
-extern void sh73a0_add_standard_devices(void);
-extern void sh73a0_clock_init(void);
-extern void sh73a0_pinmux_init(void);
-extern void sh73a0_pm_init(void);
-extern struct clk sh73a0_extal1_clk;
-extern struct clk sh73a0_extal2_clk;
-extern struct clk sh73a0_extcki_clk;
-extern struct clk sh73a0_extalr_clk;
-extern struct smp_operations sh73a0_smp_ops;
+extern const struct smp_operations sh73a0_smp_ops;
 
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index baff3b5ef..3a732199c 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -21,7 +21,9 @@
 #include <linux/delay.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
+
 #include "common.h"
+#include "emev2.h"
 
 #define EMEV2_SCU_BASE 0x1e000000
 #define EMEV2_SMU_BASE 0xe0110000
@@ -45,11 +47,10 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 	}
 
 	/* setup EMEV2 specific SCU bits */
-	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
-	shmobile_smp_scu_prepare_cpus(max_cpus);
+	shmobile_smp_scu_prepare_cpus(EMEV2_SCU_BASE, max_cpus);
 }
 
-struct smp_operations emev2_smp_ops __initdata = {
+const struct smp_operations emev2_smp_ops __initconst = {
 	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
 	.smp_boot_secondary	= emev2_boot_secondary,
 };
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 01f792fcb..c6951ee24 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -19,54 +19,45 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/soc/renesas/rcar-sysc.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
-#include <asm/smp_twd.h>
 
 #include "common.h"
-#include "pm-rcar.h"
 #include "r8a7779.h"
 
 #define AVECR IOMEM(0xfe700040)
 #define R8A7779_SCU_BASE 0xf0000000
 
-static struct rcar_sysc_ch r8a7779_ch_cpu1 = {
+static const struct rcar_sysc_ch r8a7779_ch_cpu1 = {
 	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
 	.chan_bit = 1, /* ARM1 */
 	.isr_bit = 1, /* ARM1 */
 };
 
-static struct rcar_sysc_ch r8a7779_ch_cpu2 = {
+static const struct rcar_sysc_ch r8a7779_ch_cpu2 = {
 	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
 	.chan_bit = 2, /* ARM2 */
 	.isr_bit = 2, /* ARM2 */
 };
 
-static struct rcar_sysc_ch r8a7779_ch_cpu3 = {
+static const struct rcar_sysc_ch r8a7779_ch_cpu3 = {
 	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
 	.chan_bit = 3, /* ARM3 */
 	.isr_bit = 3, /* ARM3 */
 };
 
-static struct rcar_sysc_ch *r8a7779_ch_cpu[4] = {
+static const struct rcar_sysc_ch * const r8a7779_ch_cpu[4] = {
 	[1] = &r8a7779_ch_cpu1,
 	[2] = &r8a7779_ch_cpu2,
 	[3] = &r8a7779_ch_cpu3,
 };
 
-#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, R8A7779_SCU_BASE + 0x600, 29);
-void __init r8a7779_register_twd(void)
-{
-	twd_local_timer_register(&twd_local_timer);
-}
-#endif
-
 static int r8a7779_platform_cpu_kill(unsigned int cpu)
 {
-	struct rcar_sysc_ch *ch = NULL;
+	const struct rcar_sysc_ch *ch = NULL;
 	int ret = -EIO;
 
 	cpu = cpu_logical_map(cpu);
@@ -82,7 +73,7 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu)
 
 static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	struct rcar_sysc_ch *ch = NULL;
+	const struct rcar_sysc_ch *ch = NULL;
 	unsigned int lcpu = cpu_logical_map(cpu);
 	int ret;
 
@@ -101,12 +92,9 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	__raw_writel(__pa(shmobile_boot_vector), AVECR);
-	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
-	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* setup r8a7779 specific SCU bits */
-	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
-	shmobile_smp_scu_prepare_cpus(max_cpus);
+	shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus);
 
 	r8a7779_pm_init();
 
@@ -126,7 +114,7 @@ static int r8a7779_cpu_kill(unsigned int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-struct smp_operations r8a7779_smp_ops  __initdata = {
+const struct smp_operations r8a7779_smp_ops  __initconst = {
 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7779_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
index 930f45cbc..28f26d536 100644
--- a/arch/arm/mach-shmobile/smp-r8a7790.c
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -17,21 +17,21 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/soc/renesas/rcar-sysc.h>
 
 #include <asm/smp_plat.h>
 
 #include "common.h"
 #include "platsmp-apmu.h"
-#include "pm-rcar.h"
 #include "rcar-gen2.h"
 #include "r8a7790.h"
 
-static struct rcar_sysc_ch r8a7790_ca15_scu = {
+static const struct rcar_sysc_ch r8a7790_ca15_scu = {
 	.chan_offs = 0x180, /* PWRSR5 .. PWRER5 */
 	.isr_bit = 12, /* CA15-SCU */
 };
 
-static struct rcar_sysc_ch r8a7790_ca7_scu = {
+static const struct rcar_sysc_ch r8a7790_ca7_scu = {
 	.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
 	.isr_bit = 21, /* CA7-SCU */
 };
@@ -60,11 +60,11 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
 	rcar_sysc_power_up(&r8a7790_ca7_scu);
 }
 
-struct smp_operations r8a7790_smp_ops __initdata = {
+const struct smp_operations r8a7790_smp_ops __initconst = {
 	.smp_prepare_cpus	= r8a7790_smp_prepare_cpus,
 	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_can_disable	= shmobile_smp_cpu_can_disable,
 	.cpu_die		= shmobile_smp_apmu_cpu_die,
 	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
 #endif
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index 5e2d1db79..2d6417af7 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -54,11 +54,11 @@ static int r8a7791_smp_boot_secondary(unsigned int cpu,
 	return shmobile_smp_apmu_boot_secondary(cpu, idle);
 }
 
-struct smp_operations r8a7791_smp_ops __initdata = {
+const struct smp_operations r8a7791_smp_ops __initconst = {
 	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7791_smp_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_can_disable	= shmobile_smp_cpu_can_disable,
 	.cpu_die		= shmobile_smp_apmu_cpu_die,
 	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
 #endif
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 2106d6b76..411374043 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -33,14 +33,6 @@
 
 #define SH73A0_SCU_BASE 0xf0000000
 
-#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29);
-void __init sh73a0_register_twd(void)
-{
-	twd_local_timer_register(&twd_local_timer);
-}
-#endif
-
 static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned int lcpu = cpu_logical_map(cpu);
@@ -60,15 +52,14 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 	__raw_writel(__pa(shmobile_boot_vector), SBAR);
 
 	/* setup sh73a0 specific SCU bits */
-	shmobile_scu_base = IOMEM(SH73A0_SCU_BASE);
-	shmobile_smp_scu_prepare_cpus(max_cpus);
+	shmobile_smp_scu_prepare_cpus(SH73A0_SCU_BASE, max_cpus);
 }
 
-struct smp_operations sh73a0_smp_ops __initdata = {
+const struct smp_operations sh73a0_smp_ops __initconst = {
 	.smp_prepare_cpus	= sh73a0_smp_prepare_cpus,
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_can_disable	= shmobile_smp_cpu_can_disable,
 	.cpu_die		= shmobile_smp_scu_cpu_die,
 	.cpu_kill		= shmobile_smp_scu_cpu_kill,
 #endif
diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c
index 5d92b5dd4..74b30bade 100644
--- a/arch/arm/mach-shmobile/suspend.c
+++ b/arch/arm/mach-shmobile/suspend.c
@@ -17,6 +17,8 @@
 #include <asm/io.h>
 #include <asm/system_misc.h>
 
+#include "common.h"
+
 static int shmobile_suspend_default_enter(suspend_state_t suspend_state)
 {
 	cpu_do_idle();
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 0edf2a6d2..6196a6380 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -18,29 +18,11 @@
 #include <linux/delay.h>
 #include <linux/of_address.h>
 
-static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
-					   unsigned int mult, unsigned int div)
-{
-	/* calculate a worst-case loops-per-jiffy value
-	 * based on maximum cpu core hz setting and the
-	 * __delay() implementation in arch/arm/lib/delay.S
-	 *
-	 * this will result in a longer delay than expected
-	 * when the cpu core runs on lower frequencies.
-	 */
-
-	unsigned int value = HZ * div / mult;
-
-	if (!preset_lpj)
-		preset_lpj = max_cpu_core_hz / value;
-}
+#include "common.h"
 
 void __init shmobile_init_delay(void)
 {
 	struct device_node *np, *cpus;
-	bool is_a7_a8_a9 = false;
-	bool is_a15 = false;
-	bool has_arch_timer = false;
 	u32 max_freq = 0;
 
 	cpus = of_find_node_by_path("/cpus");
@@ -50,19 +32,16 @@ void __init shmobile_init_delay(void)
 	for_each_child_of_node(cpus, np) {
 		u32 freq;
 
+		if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER) &&
+		    (of_device_is_compatible(np, "arm,cortex-a7") ||
+		     of_device_is_compatible(np, "arm,cortex-a15"))) {
+			of_node_put(np);
+			of_node_put(cpus);
+			return;
+		}
+
 		if (!of_property_read_u32(np, "clock-frequency", &freq))
 			max_freq = max(max_freq, freq);
-
-		if (of_device_is_compatible(np, "arm,cortex-a8") ||
-		    of_device_is_compatible(np, "arm,cortex-a9")) {
-			is_a7_a8_a9 = true;
-		} else if (of_device_is_compatible(np, "arm,cortex-a7")) {
-			is_a7_a8_a9 = true;
-			has_arch_timer = true;
-		} else if (of_device_is_compatible(np, "arm,cortex-a15")) {
-			is_a15 = true;
-			has_arch_timer = true;
-		}
 	}
 
 	of_node_put(cpus);
@@ -70,43 +49,15 @@ void __init shmobile_init_delay(void)
 	if (!max_freq)
 		return;
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	/* Non-multiplatform r8a73a4 SoC cannot use arch timer due
-	 * to GIC being initialized from C and arch timer via DT */
-	if (of_machine_is_compatible("renesas,r8a73a4"))
-		has_arch_timer = false;
-
-	/* Non-multiplatform r8a7790 SoC cannot use arch timer due
-	 * to GIC being initialized from C and arch timer via DT */
-	if (of_machine_is_compatible("renesas,r8a7790"))
-		has_arch_timer = false;
-#endif
-
-	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
-		if (is_a7_a8_a9)
-			shmobile_setup_delay_hz(max_freq, 1, 3);
-		else if (is_a15)
-			shmobile_setup_delay_hz(max_freq, 2, 4);
-	}
-}
-
-static void __init shmobile_late_time_init(void)
-{
 	/*
-	 * Make sure all compiled-in early timers register themselves.
+	 * Calculate a worst-case loops-per-jiffy value
+	 * based on maximum cpu core hz setting and the
+	 * __delay() implementation in arch/arm/lib/delay.S.
 	 *
-	 * Run probe() for two "earlytimer" devices, these will be the
-	 * clockevents and clocksource devices respectively. In the event
-	 * that only a clockevents device is available, we -ENODEV on the
-	 * clocksource and the jiffies clocksource is used transparently
-	 * instead. No error handling is necessary here.
+	 * This will result in a longer delay than expected
+	 * when the cpu core runs on lower frequencies.
 	 */
-	early_platform_driver_register_all("earlytimer");
-	early_platform_driver_probe("earlytimer", 2, 0);
-}
 
-void __init shmobile_earlytimer_init(void)
-{
-	late_time_init = shmobile_late_time_init;
+	if (!preset_lpj)
+		preset_lpj = max_freq / HZ;
 }
-
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 90efdeb56..d0f62eacf 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_SOCFPGA
-	bool "Altera SOCFPGA family" if ARCH_MULTI_V7
+	bool "Altera SOCFPGA family"
+	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index b8f9e238e..ed15db19e 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -5,3 +5,5 @@
 obj-y					:= socfpga.o
 obj-$(CONFIG_SMP)	+= headsmp.o platsmp.o
 obj-$(CONFIG_SOCFPGA_SUSPEND)	+= pm.o self-refresh.o
+obj-$(CONFIG_EDAC_ALTERA_L2C)	+= l2_cache.o
+obj-$(CONFIG_EDAC_ALTERA_OCRAM)	+= ocram.o
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 7259c3732..65e1817d8 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -25,6 +25,7 @@
 #define SOCFPGA_RSTMGR_MODPERRST	0x14
 #define SOCFPGA_RSTMGR_BRGMODRST	0x1c
 
+#define SOCFPGA_A10_RSTMGR_CTRL		0xC
 #define SOCFPGA_A10_RSTMGR_MODMPURST	0x20
 
 /* System Manager bits */
@@ -35,6 +36,10 @@
 
 extern void socfpga_init_clocks(void);
 extern void socfpga_sysmgr_init(void);
+void socfpga_init_l2_ecc(void);
+void socfpga_init_ocram_ecc(void);
+void socfpga_init_arria10_l2_ecc(void);
+void socfpga_init_arria10_ocram_ecc(void);
 
 extern void __iomem *sys_manager_base_addr;
 extern void __iomem *rst_manager_base_addr;
diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S
index 5d94b7a2f..c160fa300 100644
--- a/arch/arm/mach-socfpga/headsmp.S
+++ b/arch/arm/mach-socfpga/headsmp.S
@@ -13,6 +13,7 @@
 #include <asm/assembler.h>
 
 	.arch	armv7-a
+	.arm
 
 ENTRY(secondary_trampoline)
 	/* CPU1 will always fetch from 0x0 when it is brought out of reset.
diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c
new file mode 100644
index 000000000..4267c95f2
--- /dev/null
+++ b/arch/arm/mach-socfpga/l2_cache.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright Altera Corporation (C) 2016. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include "core.h"
+
+/* A10 System Manager L2 ECC Control register */
+#define A10_MPU_CTRL_L2_ECC_OFST          0x0
+#define A10_MPU_CTRL_L2_ECC_EN            BIT(0)
+
+/* A10 System Manager Global IRQ Mask register */
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
+#define A10_SYSMGR_ECC_INTMASK_CLR_L2     BIT(0)
+
+/* A10 System Manager L2 ECC IRQ Clear register */
+#define A10_SYSMGR_MPU_CLEAR_L2_ECC_OFST  0xA8
+#define A10_SYSMGR_MPU_CLEAR_L2_ECC       (BIT(31) | BIT(15))
+
+void socfpga_init_l2_ecc(void)
+{
+	struct device_node *np;
+	void __iomem *mapped_l2_edac_addr;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-l2-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-l2-ecc in dtb\n");
+		return;
+	}
+
+	mapped_l2_edac_addr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!mapped_l2_edac_addr) {
+		pr_err("Unable to find L2 ECC mapping in dtb\n");
+		return;
+	}
+
+	/* Enable ECC */
+	writel(0x01, mapped_l2_edac_addr);
+	iounmap(mapped_l2_edac_addr);
+}
+
+void socfpga_init_arria10_l2_ecc(void)
+{
+	struct device_node *np;
+	void __iomem *mapped_l2_edac_addr;
+
+	/* Find the L2 EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-l2-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-a10-l2-ecc in dtb\n");
+		return;
+	}
+
+	mapped_l2_edac_addr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!mapped_l2_edac_addr) {
+		pr_err("Unable to find L2 ECC mapping in dtb\n");
+		return;
+	}
+
+	if (!sys_manager_base_addr) {
+		pr_err("System Mananger not mapped for L2 ECC\n");
+		goto exit;
+	}
+	/* Clear any pending IRQs */
+	writel(A10_SYSMGR_MPU_CLEAR_L2_ECC, (sys_manager_base_addr +
+	       A10_SYSMGR_MPU_CLEAR_L2_ECC_OFST));
+	/* Enable ECC */
+	writel(A10_SYSMGR_ECC_INTMASK_CLR_L2, sys_manager_base_addr +
+	       A10_SYSMGR_ECC_INTMASK_CLR_OFST);
+	writel(A10_MPU_CTRL_L2_ECC_EN, mapped_l2_edac_addr +
+	       A10_MPU_CTRL_L2_ECC_OFST);
+exit:
+	iounmap(mapped_l2_edac_addr);
+}
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
new file mode 100644
index 000000000..10d673252
--- /dev/null
+++ b/arch/arm/mach-socfpga/ocram.c
@@ -0,0 +1,182 @@
+/*
+ * Copyright Altera Corporation (C) 2016. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/genalloc.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include "core.h"
+
+#define ALTR_OCRAM_CLEAR_ECC          0x00000018
+#define ALTR_OCRAM_ECC_EN             0x00000019
+
+void socfpga_init_ocram_ecc(void)
+{
+	struct device_node *np;
+	void __iomem *mapped_ocr_edac_addr;
+
+	/* Find the OCRAM EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-ocram-ecc\n");
+		return;
+	}
+
+	mapped_ocr_edac_addr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!mapped_ocr_edac_addr) {
+		pr_err("Unable to map OCRAM ecc regs.\n");
+		return;
+	}
+
+	/* Clear any pending OCRAM ECC interrupts, then enable ECC */
+	writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr);
+	writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr);
+
+	iounmap(mapped_ocr_edac_addr);
+}
+
+/* Arria10 OCRAM Section */
+#define ALTR_A10_ECC_CTRL_OFST          0x08
+#define ALTR_A10_OCRAM_ECC_EN_CTL       (BIT(1) | BIT(0))
+#define ALTR_A10_ECC_INITA              BIT(16)
+
+#define ALTR_A10_ECC_INITSTAT_OFST      0x0C
+#define ALTR_A10_ECC_INITCOMPLETEA      BIT(0)
+#define ALTR_A10_ECC_INITCOMPLETEB      BIT(8)
+
+#define ALTR_A10_ECC_ERRINTEN_OFST      0x10
+#define ALTR_A10_ECC_SERRINTEN          BIT(0)
+
+#define ALTR_A10_ECC_INTSTAT_OFST       0x20
+#define ALTR_A10_ECC_SERRPENA           BIT(0)
+#define ALTR_A10_ECC_DERRPENA           BIT(8)
+#define ALTR_A10_ECC_ERRPENA_MASK       (ALTR_A10_ECC_SERRPENA | \
+					 ALTR_A10_ECC_DERRPENA)
+/* ECC Manager Defines */
+#define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
+#define A10_SYSMGR_ECC_INTMASK_OCRAM      BIT(1)
+
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US   10000
+
+static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value |= bit_mask;
+	writel(value, ioaddr);
+}
+
+static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value &= ~bit_mask;
+	writel(value, ioaddr);
+}
+
+static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr)
+{
+	int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+
+	ecc_set_bits(ALTR_A10_ECC_INITA, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+	while (limit--) {
+		if (ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA,
+				  (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+			break;
+		udelay(1);
+	}
+	if (limit < 0)
+		return -EBUSY;
+
+	/* Clear any pending ECC interrupts */
+	writel(ALTR_A10_ECC_ERRPENA_MASK,
+	       (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+	return 0;
+}
+
+void socfpga_init_arria10_ocram_ecc(void)
+{
+	struct device_node *np;
+	int ret = 0;
+	void __iomem *ecc_block_base;
+
+	if (!sys_manager_base_addr) {
+		pr_err("SOCFPGA: sys-mgr is not initialized\n");
+		return;
+	}
+
+	/* Find the OCRAM EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
+		return;
+	}
+
+	/* Map the ECC Block */
+	ecc_block_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!ecc_block_base) {
+		pr_err("Unable to map OCRAM ECC block\n");
+		return;
+	}
+
+	/* Disable ECC */
+	writel(ALTR_A10_OCRAM_ECC_EN_CTL,
+	       sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_SET_OFST);
+	ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
+		       (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	ecc_clear_bits(ALTR_A10_OCRAM_ECC_EN_CTL,
+		       (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+
+	/* Ensure all writes complete */
+	wmb();
+
+	/* Use HW initialization block to initialize memory for ECC */
+	ret = altr_init_memory_port(ecc_block_base);
+	if (ret) {
+		pr_err("ECC: cannot init OCRAM PORTA memory\n");
+		goto exit;
+	}
+
+	/* Enable ECC */
+	ecc_set_bits(ALTR_A10_OCRAM_ECC_EN_CTL,
+		     (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+	ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
+		     (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	writel(ALTR_A10_OCRAM_ECC_EN_CTL,
+	       sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_CLR_OFST);
+
+	/* Ensure all writes complete */
+	wmb();
+exit:
+	iounmap(ecc_block_base);
+}
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index c6f1df89f..07945748b 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -94,6 +94,7 @@ static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
 	scu_enable(socfpga_scu_base_addr);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -106,19 +107,33 @@ static void socfpga_cpu_die(unsigned int cpu)
 		cpu_do_idle();
 }
 
-static struct smp_operations socfpga_smp_ops __initdata = {
+/*
+ * We need a dummy function so that platform_can_cpu_hotplug() knows
+ * we support CPU hotplug. However, the function does not need to do
+ * anything, because CPUs going offline just do WFI. We could reset
+ * the CPUs but it would increase power consumption.
+ */
+static int socfpga_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+#endif
+
+static const struct smp_operations socfpga_smp_ops __initconst = {
 	.smp_prepare_cpus	= socfpga_smp_prepare_cpus,
 	.smp_boot_secondary	= socfpga_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= socfpga_cpu_die,
+	.cpu_kill		= socfpga_cpu_kill,
 #endif
 };
 
-static struct smp_operations socfpga_a10_smp_ops __initdata = {
+static const struct smp_operations socfpga_a10_smp_ops __initconst = {
 	.smp_prepare_cpus	= socfpga_smp_prepare_cpus,
 	.smp_boot_secondary	= socfpga_a10_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= socfpga_cpu_die,
+	.cpu_kill		= socfpga_cpu_kill,
 #endif
 };
 
diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
index 6a4199f2b..c378ab0c2 100644
--- a/arch/arm/mach-socfpga/pm.c
+++ b/arch/arm/mach-socfpga/pm.c
@@ -56,7 +56,7 @@ static int socfpga_setup_ocram_self_refresh(void)
 		goto put_node;
 	}
 
-	ocram_pool = gen_pool_get(&pdev->dev);
+	ocram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index 19643a756..dde14f7bf 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -59,6 +59,21 @@ static void __init socfpga_init_irq(void)
 {
 	irqchip_init();
 	socfpga_sysmgr_init();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))
+		socfpga_init_l2_ecc();
+
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
+		socfpga_init_ocram_ecc();
+}
+
+static void __init socfpga_arria10_init_irq(void)
+{
+	irqchip_init();
+	socfpga_sysmgr_init();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))
+		socfpga_init_arria10_l2_ecc();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
+		socfpga_init_arria10_ocram_ecc();
 }
 
 static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
@@ -74,6 +89,19 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
 	writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL);
 }
 
+static void socfpga_arria10_restart(enum reboot_mode mode, const char *cmd)
+{
+	u32 temp;
+
+	temp = readl(rst_manager_base_addr + SOCFPGA_A10_RSTMGR_CTRL);
+
+	if (mode == REBOOT_HARD)
+		temp |= RSTMGR_CTRL_SWCOLDRSTREQ;
+	else
+		temp |= RSTMGR_CTRL_SWWARMRSTREQ;
+	writel(temp, rst_manager_base_addr + SOCFPGA_A10_RSTMGR_CTRL);
+}
+
 static const char *altera_dt_match[] = {
 	"altr,socfpga",
 	NULL
@@ -86,3 +114,16 @@ DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
 	.restart	= socfpga_cyclone5_restart,
 	.dt_compat	= altera_dt_match,
 MACHINE_END
+
+static const char *altera_a10_dt_match[] = {
+	"altr,socfpga-arria10",
+	NULL
+};
+
+DT_MACHINE_START(SOCFPGA_A10, "Altera SOCFPGA Arria10")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq	= socfpga_arria10_init_irq,
+	.restart	= socfpga_arria10_restart,
+	.dt_compat	= altera_a10_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index b6f4bda27..b7260c2b5 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -3,10 +3,11 @@
 #
 
 menuconfig PLAT_SPEAR
-	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
+	bool "ST SPEAr Family"
+	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
 	select ARM_AMBA
 	select CLKSRC_MMIO
+	select GPIOLIB
 
 if PLAT_SPEAR
 
diff --git a/arch/arm/mach-spear/Makefile.boot b/arch/arm/mach-spear/Makefile.boot
deleted file mode 100644
index 4674a4c22..000000000
--- a/arch/arm/mach-spear/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index 06640914d..909b97c0b 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -39,7 +39,7 @@ void spear_restart(enum reboot_mode, const char *);
 void spear13xx_secondary_startup(void);
 void spear13xx_cpu_die(unsigned int cpu);
 
-extern struct smp_operations spear13xx_smp_ops;
+extern const struct smp_operations spear13xx_smp_ops;
 
 #ifdef CONFIG_MACH_SPEAR1310
 void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base);
diff --git a/arch/arm/mach-spear/hotplug.c b/arch/arm/mach-spear/hotplug.c
index d97749c64..12edd1cf8 100644
--- a/arch/arm/mach-spear/hotplug.c
+++ b/arch/arm/mach-spear/hotplug.c
@@ -80,7 +80,7 @@ static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
  *
  * Called with IRQs disabled
  */
-void __ref spear13xx_cpu_die(unsigned int cpu)
+void spear13xx_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c
index fd4297713..8d1e2d551 100644
--- a/arch/arm/mach-spear/platsmp.c
+++ b/arch/arm/mach-spear/platsmp.c
@@ -120,7 +120,7 @@ static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
 	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
 }
 
-struct smp_operations spear13xx_smp_ops __initdata = {
+const struct smp_operations spear13xx_smp_ops __initconst = {
        .smp_init_cpus		= spear13xx_smp_init_cpus,
        .smp_prepare_cpus	= spear13xx_smp_prepare_cpus,
        .smp_secondary_init	= spear13xx_secondary_init,
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index cd5d375d9..a7d4f1368 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -14,7 +14,6 @@
 #define pr_fmt(fmt) "SPEAr1310: " fmt
 
 #include <linux/amba/pl022.h>
-#include <linux/of_platform.h>
 #include <linux/pata_arasan_cf_data.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -27,7 +26,6 @@
 
 static void __init spear1310_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
 }
 
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 94594d5a4..a212af90c 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -19,7 +19,6 @@
 
 static void __init spear1340_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
 }
 
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index b7afce679..ca2f6a82a 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -124,5 +124,5 @@ void __init spear13xx_timer_init(void)
 	clk_put(pclk);
 
 	spear_setup_of_timer();
-	clocksource_of_init();
+	clocksource_probe();
 }
diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c
index 5b32edda2..325b89579 100644
--- a/arch/arm/mach-spear/spear300.c
+++ b/arch/arm/mach-spear/spear300.c
@@ -194,8 +194,7 @@ static void __init spear300_dt_init(void)
 	pl080_plat_data.slave_channels = spear300_dma_info;
 	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear300_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, spear300_auxdata_lookup, NULL);
 }
 
 static const char * const spear300_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c
index 86a44ac7f..59e173dc8 100644
--- a/arch/arm/mach-spear/spear310.c
+++ b/arch/arm/mach-spear/spear310.c
@@ -236,8 +236,7 @@ static void __init spear310_dt_init(void)
 	pl080_plat_data.slave_channels = spear310_dma_info;
 	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear310_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, spear310_auxdata_lookup, NULL);
 }
 
 static const char * const spear310_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c
index d45d75192..0958f68a2 100644
--- a/arch/arm/mach-spear/spear320.c
+++ b/arch/arm/mach-spear/spear320.c
@@ -240,8 +240,7 @@ static void __init spear320_dt_init(void)
 	pl080_plat_data.slave_channels = spear320_dma_info;
 	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear320_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, spear320_auxdata_lookup, NULL);
 }
 
 static const char * const spear320_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c
index da26fa5b6..ccf3573b8 100644
--- a/arch/arm/mach-spear/spear6xx.c
+++ b/arch/arm/mach-spear/spear6xx.c
@@ -411,8 +411,7 @@ struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
 
 static void __init spear600_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear6xx_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, spear6xx_auxdata_lookup, NULL);
 }
 
 static const char *spear600_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index 26fda4ed4..9ccffc1d0 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -66,8 +66,6 @@
 static __iomem void *gpt_base;
 static struct clk *gpt_clk;
 
-static void clockevent_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk_event_dev);
 static int clockevent_next_event(unsigned long evt,
 				 struct clock_event_device *clk_event_dev);
 
@@ -95,54 +93,67 @@ static void __init spear_clocksource_init(void)
 		200, 16, clocksource_mmio_readw_up);
 }
 
-static struct clock_event_device clkevt = {
-	.name = "tmr0",
-	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = clockevent_set_mode,
-	.set_next_event = clockevent_next_event,
-	.shift = 0,	/* to be computed */
-};
+static inline void timer_shutdown(struct clock_event_device *evt)
+{
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	/* stop the timer */
+	val &= ~CTRL_ENABLE;
+	writew(val, gpt_base + CR(CLKEVT));
+}
+
+static int spear_shutdown(struct clock_event_device *evt)
+{
+	timer_shutdown(evt);
+
+	return 0;
+}
+
+static int spear_set_oneshot(struct clock_event_device *evt)
+{
+	u16 val;
 
-static void clockevent_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk_event_dev)
+	/* stop the timer */
+	timer_shutdown(evt);
+
+	val = readw(gpt_base + CR(CLKEVT));
+	val |= CTRL_ONE_SHOT;
+	writew(val, gpt_base + CR(CLKEVT));
+
+	return 0;
+}
+
+static int spear_set_periodic(struct clock_event_device *evt)
 {
 	u32 period;
 	u16 val;
 
 	/* stop the timer */
+	timer_shutdown(evt);
+
+	period = clk_get_rate(gpt_clk) / HZ;
+	period >>= CTRL_PRESCALER16;
+	writew(period, gpt_base + LOAD(CLKEVT));
+
 	val = readw(gpt_base + CR(CLKEVT));
-	val &= ~CTRL_ENABLE;
+	val &= ~CTRL_ONE_SHOT;
+	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 	writew(val, gpt_base + CR(CLKEVT));
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		period = clk_get_rate(gpt_clk) / HZ;
-		period >>= CTRL_PRESCALER16;
-		writew(period, gpt_base + LOAD(CLKEVT));
-
-		val = readw(gpt_base + CR(CLKEVT));
-		val &= ~CTRL_ONE_SHOT;
-		val |= CTRL_ENABLE | CTRL_INT_ENABLE;
-		writew(val, gpt_base + CR(CLKEVT));
-
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		val = readw(gpt_base + CR(CLKEVT));
-		val |= CTRL_ONE_SHOT;
-		writew(val, gpt_base + CR(CLKEVT));
-
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-
-		break;
-	default:
-		pr_err("Invalid mode requested\n");
-		break;
-	}
+	return 0;
 }
 
+static struct clock_event_device clkevt = {
+	.name = "tmr0",
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown = spear_shutdown,
+	.set_state_periodic = spear_set_periodic,
+	.set_state_oneshot = spear_set_oneshot,
+	.tick_resume = spear_shutdown,
+	.set_next_event = clockevent_next_event,
+	.shift = 0,	/* to be computed */
+};
+
 static int clockevent_next_event(unsigned long cycles,
 				 struct clock_event_device *clk_event_dev)
 {
@@ -193,7 +204,7 @@ static void __init spear_clockevent_init(int irq)
 	setup_irq(irq, &spear_timer_irq);
 }
 
-const static struct of_device_id timer_of_match[] __initconst = {
+static const struct of_device_id const timer_of_match[] __initconst = {
 	{ .compatible = "st,spear-timer", },
 	{ },
 };
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index 125865daa..119e1108b 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -1,14 +1,16 @@
 menuconfig ARCH_STI
-	bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
+	bool "STMicroelectronics Consumer Electronics SOCs"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ST_IRQCHIP
 	select ARM_GLOBAL_TIMER
+	select CLKSRC_ST_LPC
 	select PINCTRL
 	select PINCTRL_ST
 	select MFD_SYSCON
 	select ARCH_HAS_RESET_CONTROLLER
 	select HAVE_ARM_SCU if SMP
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
@@ -16,11 +18,10 @@ menuconfig ARCH_STI
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select RESET_CONTROLLER
 	help
-	  Include support for STiH41x SOCs like STiH415/416 using the device tree
-	  for discovery
-	  More information at Documentation/arm/STiH41x and
-	  at Documentation/devicetree
-
+	  Include support for STMicroelectronics' STiH415/416, STiH407/10 and
+	  STiH418 family SoCs using the Device Tree for discovery.  More
+	  information can be found in Documentation/arm/sti/ and
+	  Documentation/devicetree.
 
 if ARCH_STI
 
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index b373acade..e04cd1b20 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -14,7 +14,7 @@
 
 #include "smp.h"
 
-static const char *stih41x_dt_match[] __initdata = {
+static const char *const stih41x_dt_match[] __initconst = {
 	"st,stih415",
 	"st,stih416",
 	"st,stih407",
@@ -23,7 +23,15 @@ static const char *stih41x_dt_match[] __initdata = {
 	NULL
 };
 
-DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
+static void sti_l2_write_sec(unsigned long val, unsigned reg)
+{
+	/*
+	 * We can't write to secure registers as we are in non-secure
+	 * mode, until we have some SMI service available.
+	 */
+}
+
+DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
 	.dt_compat	= stih41x_dt_match,
 	.l2c_aux_val	= L2C_AUX_CTRL_SHARED_OVERRIDE |
 			  L310_AUX_CTRL_DATA_PREFETCH |
@@ -31,4 +39,5 @@ DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
 			  L2C_AUX_CTRL_WAY_SIZE(4),
 	.l2c_aux_mask	= 0xc0000fff,
 	.smp		= smp_ops(sti_smp_ops),
+	.l2c_write_sec	= sti_l2_write_sec,
 MACHINE_END
diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S
index 4c09bae86..e0ad45170 100644
--- a/arch/arm/mach-sti/headsmp.S
+++ b/arch/arm/mach-sti/headsmp.S
@@ -37,6 +37,7 @@ pen:	ldr	r7, [r6]
 	 * should now contain the SVC stack for this core
 	 */
 	b	secondary_startup
+ENDPROC(sti_secondary_startup)
 
 1:	.long	.
 	.long	pen_release
diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c
index d4b624f8d..ea5a2277e 100644
--- a/arch/arm/mach-sti/platsmp.c
+++ b/arch/arm/mach-sti/platsmp.c
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/memblock.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
@@ -38,8 +39,6 @@ static DEFINE_SPINLOCK(boot_lock);
 
 static void sti_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
@@ -99,17 +98,65 @@ static int sti_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init sti_smp_prepare_cpus(unsigned int max_cpus)
 {
-	void __iomem *scu_base = NULL;
-	struct device_node *np = of_find_compatible_node(
-					NULL, NULL, "arm,cortex-a9-scu");
+	struct device_node *np;
+	void __iomem *scu_base;
+	u32 __iomem *cpu_strt_ptr;
+	u32 release_phys;
+	int cpu;
+	unsigned long entry_pa = virt_to_phys(sti_secondary_startup);
+
+	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+
 	if (np) {
 		scu_base = of_iomap(np, 0);
 		scu_enable(scu_base);
 		of_node_put(np);
 	}
+
+	if (max_cpus <= 1)
+		return;
+
+	for_each_possible_cpu(cpu) {
+
+		np = of_get_cpu_node(cpu, NULL);
+
+		if (!np)
+			continue;
+
+		if (of_property_read_u32(np, "cpu-release-addr",
+						&release_phys)) {
+			pr_err("CPU %d: missing or invalid cpu-release-addr "
+				"property\n", cpu);
+			continue;
+		}
+
+		/*
+		 * holding pen is usually configured in SBC DMEM but can also be
+		 * in RAM.
+		 */
+
+		if (!memblock_is_memory(release_phys))
+			cpu_strt_ptr =
+				ioremap(release_phys, sizeof(release_phys));
+		else
+			cpu_strt_ptr =
+				(u32 __iomem *)phys_to_virt(release_phys);
+
+		__raw_writel(entry_pa, cpu_strt_ptr);
+
+		/*
+		 * wmb so that data is actually written
+		 * before cache flush is done
+		 */
+		smp_wmb();
+		sync_cache_w(cpu_strt_ptr);
+
+		if (!memblock_is_memory(release_phys))
+			iounmap(cpu_strt_ptr);
+	}
 }
 
-struct smp_operations __initdata sti_smp_ops = {
+const struct smp_operations sti_smp_ops __initconst = {
 	.smp_prepare_cpus	= sti_smp_prepare_cpus,
 	.smp_secondary_init	= sti_secondary_init,
 	.smp_boot_secondary	= sti_boot_secondary,
diff --git a/arch/arm/mach-sti/smp.h b/arch/arm/mach-sti/smp.h
index 1871b72b1..d8a2f8758 100644
--- a/arch/arm/mach-sti/smp.h
+++ b/arch/arm/mach-sti/smp.h
@@ -12,6 +12,8 @@
 #ifndef __MACH_STI_SMP_H
 #define __MACH_STI_SMP_H
 
-extern struct smp_operations	sti_smp_ops;
+extern const struct smp_operations sti_smp_ops;
+
+void sti_secondary_startup(void);
 
 #endif
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index f2ad7723d..ceee47735 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -10,6 +10,7 @@
 
 static const char *const stm32_compat[] __initconst = {
 	"st,stm32f429",
+	"st,stm32f469",
 	NULL
 };
 
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 4efe2d43a..096ed216c 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,9 +1,10 @@
 menuconfig ARCH_SUNXI
-	bool "Allwinner SoCs" if ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	bool "Allwinner SoCs"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select PINCTRL
 	select SUN4I_TIMER
 	select RESET_CONTROLLER
diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
index e8483ec79..664226781 100644
--- a/arch/arm/mach-sunxi/platsmp.c
+++ b/arch/arm/mach-sunxi/platsmp.c
@@ -116,7 +116,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu,
 	return 0;
 }
 
-static struct smp_operations sun6i_smp_ops __initdata = {
+static const struct smp_operations sun6i_smp_ops __initconst = {
 	.smp_prepare_cpus	= sun6i_smp_prepare_cpus,
 	.smp_boot_secondary	= sun6i_smp_boot_secondary,
 };
@@ -185,7 +185,7 @@ static int sun8i_smp_boot_secondary(unsigned int cpu,
 	return 0;
 }
 
-struct smp_operations sun8i_smp_ops __initdata = {
+static const struct smp_operations sun8i_smp_ops __initconst = {
 	.smp_prepare_cpus	= sun8i_smp_prepare_cpus,
 	.smp_boot_secondary	= sun8i_smp_boot_secondary,
 };
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 65bab2876..95dca8c2c 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -17,21 +17,16 @@
 
 #include <asm/mach/arch.h>
 
-static void __init sunxi_dt_cpufreq_init(void)
-{
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
 static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun4i-a10",
 	"allwinner,sun5i-a10s",
 	"allwinner,sun5i-a13",
+	"allwinner,sun5i-r8",
 	NULL,
 };
 
-DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
+DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families")
 	.dt_compat	= sunxi_board_dt_compat,
-	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
 
 static const char * const sun6i_board_dt_compat[] = {
@@ -46,13 +41,12 @@ static void __init sun6i_timer_init(void)
 	of_clk_init(NULL);
 	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
 		sun6i_reset_init();
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
 	.init_time	= sun6i_timer_init,
 	.dt_compat	= sun6i_board_dt_compat,
-	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
 
 static const char * const sun7i_board_dt_compat[] = {
@@ -62,12 +56,12 @@ static const char * const sun7i_board_dt_compat[] = {
 
 DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
 	.dt_compat	= sun7i_board_dt_compat,
-	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
 
 static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
+	"allwinner,sun8i-a83t",
 	"allwinner,sun8i-h3",
 	NULL,
 };
@@ -75,7 +69,6 @@ static const char * const sun8i_board_dt_compat[] = {
 DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family")
 	.init_time	= sun6i_timer_init,
 	.dt_compat	= sun8i_board_dt_compat,
-	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
 
 static const char * const sun9i_board_dt_compat[] = {
diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig
new file mode 100644
index 000000000..ebe15b93b
--- /dev/null
+++ b/arch/arm/mach-tango/Kconfig
@@ -0,0 +1,13 @@
+config ARCH_TANGO
+	bool "Sigma Designs Tango4 (SMP87xx)"
+	depends on ARCH_MULTI_V7
+	# Cortex-A9 MPCore r3p0, PL310 r3p2
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_775420
+	select ARM_GIC
+	select CLKSRC_TANGO_XTAL
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD
+	select TANGO_IRQ
diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile
new file mode 100644
index 000000000..204fcd9fe
--- /dev/null
+++ b/arch/arm/mach-tango/Makefile
@@ -0,0 +1,6 @@
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
+
+obj-y += setup.o smc.o
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SUSPEND) += pm.o
diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c
new file mode 100644
index 000000000..98c62a4a8
--- /dev/null
+++ b/arch/arm/mach-tango/platsmp.c
@@ -0,0 +1,51 @@
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include "smc.h"
+
+static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	tango_set_aux_boot_addr(virt_to_phys(secondary_startup));
+	tango_start_aux_core(cpu);
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * cpu_kill() and cpu_die() run concurrently on different cores.
+ * Firmware will only "kill" a core once it has properly "died".
+ * Try a few times to kill a core before giving up, and sleep
+ * between tries to give that core enough time to die.
+ */
+static int tango_cpu_kill(unsigned int cpu)
+{
+	int i, err;
+
+	for (i = 0; i < 10; ++i) {
+		msleep(10);
+		err = tango_aux_core_kill(cpu);
+		if (!err)
+			return true;
+	}
+
+	return false;
+}
+
+static void tango_cpu_die(unsigned int cpu)
+{
+	while (tango_aux_core_die(cpu) < 0)
+		cpu_relax();
+
+	panic("cpu %d failed to die\n", cpu);
+}
+#endif
+
+static const struct smp_operations tango_smp_ops __initconst = {
+	.smp_boot_secondary	= tango_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= tango_cpu_kill,
+	.cpu_die		= tango_cpu_die,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops);
diff --git a/arch/arm/mach-tango/pm.c b/arch/arm/mach-tango/pm.c
new file mode 100644
index 000000000..b05c6d6f9
--- /dev/null
+++ b/arch/arm/mach-tango/pm.c
@@ -0,0 +1,32 @@
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include "smc.h"
+
+static int tango_pm_powerdown(unsigned long arg)
+{
+	tango_suspend(virt_to_phys(cpu_resume));
+
+	return -EIO; /* tango_suspend has failed */
+}
+
+static int tango_pm_enter(suspend_state_t state)
+{
+	if (state == PM_SUSPEND_MEM)
+		return cpu_suspend(0, tango_pm_powerdown);
+
+	return -EINVAL;
+}
+
+static const struct platform_suspend_ops tango_pm_ops = {
+	.enter = tango_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init tango_pm_init(void)
+{
+	suspend_set_ops(&tango_pm_ops);
+	return 0;
+}
+
+late_initcall(tango_pm_init);
diff --git a/arch/arm/mach-tango/setup.c b/arch/arm/mach-tango/setup.c
new file mode 100644
index 000000000..f14b6c7d2
--- /dev/null
+++ b/arch/arm/mach-tango/setup.c
@@ -0,0 +1,17 @@
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "smc.h"
+
+static void tango_l2c_write(unsigned long val, unsigned int reg)
+{
+	if (reg == L2X0_CTRL)
+		tango_set_l2_control(val);
+}
+
+static const char *const tango_dt_compat[] = { "sigma,tango4", NULL };
+
+DT_MACHINE_START(TANGO_DT, "Sigma Tango DT")
+	.dt_compat	= tango_dt_compat,
+	.l2c_aux_mask	= ~0,
+	.l2c_write_sec	= tango_l2c_write,
+MACHINE_END
diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S
new file mode 100644
index 000000000..5d932ce3c
--- /dev/null
+++ b/arch/arm/mach-tango/smc.S
@@ -0,0 +1,9 @@
+#include <linux/linkage.h>
+
+ENTRY(tango_smc)
+	push	{lr}
+	mov	ip, r1
+	dsb	/* This barrier is probably unnecessary */
+	smc	#0
+	pop	{pc}
+ENDPROC(tango_smc)
diff --git a/arch/arm/mach-tango/smc.h b/arch/arm/mach-tango/smc.h
new file mode 100644
index 000000000..57919539d
--- /dev/null
+++ b/arch/arm/mach-tango/smc.h
@@ -0,0 +1,8 @@
+extern int tango_smc(unsigned int val, unsigned int service);
+
+#define tango_set_l2_control(val)	tango_smc(val, 0x102)
+#define tango_start_aux_core(val)	tango_smc(val, 0x104)
+#define tango_set_aux_boot_addr(val)	tango_smc(val, 0x105)
+#define tango_suspend(val)		tango_smc(val, 0x120)
+#define tango_aux_core_die(val)		tango_smc(val, 0x121)
+#define tango_aux_core_kill(val)	tango_smc(val, 0x122)
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 5d1a318f1..329f01c5b 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,67 +1,17 @@
 menuconfig ARCH_TEGRA
-	bool "NVIDIA Tegra" if ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	bool "NVIDIA Tegra"
+	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
 	select ARM_AMBA
 	select ARM_GIC
 	select CLKSRC_MMIO
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
+	select PM_OPP
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 	select SOC_BUS
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  This enables support for NVIDIA Tegra based systems.
-
-if ARCH_TEGRA
-
-config ARCH_TEGRA_2x_SOC
-	bool "Enable support for Tegra20 family"
-	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
-	select ARM_ERRATA_720789
-	select ARM_ERRATA_754327 if SMP
-	select ARM_ERRATA_764369 if SMP
-	select PINCTRL_TEGRA20
-	select PL310_ERRATA_727915 if CACHE_L2X0
-	select PL310_ERRATA_769419 if CACHE_L2X0
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
-	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-
-config ARCH_TEGRA_3x_SOC
-	bool "Enable support for Tegra30 family"
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369 if SMP
-	select PINCTRL_TEGRA30
-	select PL310_ERRATA_769419 if CACHE_L2X0
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra T30 processor family, based on the
-	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-
-config ARCH_TEGRA_114_SOC
-	bool "Enable support for Tegra114 family"
-	select ARM_ERRATA_798181 if SMP
-	select ARM_L1_CACHE_SHIFT_6
-	select HAVE_ARM_ARCH_TIMER
-	select PINCTRL_TEGRA114
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra T114 processor family, based on the
-	  ARM CortexA15MP CPU
-
-config ARCH_TEGRA_124_SOC
-	bool "Enable support for Tegra124 family"
-	select ARM_L1_CACHE_SHIFT_6
-	select HAVE_ARM_ARCH_TIMER
-	select PINCTRL_TEGRA124
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra T124 processor family, based on the
-	  ARM CortexA15MP CPU
-
-endif
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index fbe74c680..7478f6fb3 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -17,36 +17,35 @@
  *
  */
 
+#include <linux/property.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
-#include <linux/rfkill-gpio.h>
 
 #include "board.h"
 
-static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
-	.name	= "wifi_rfkill",
-	.type	= RFKILL_TYPE_WLAN,
+static struct property_entry __initdata wifi_rfkill_prop[] = {
+	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
+	PROPERTY_ENTRY_STRING("type", "wlan"),
+	{ },
 };
 
 static struct platform_device wifi_rfkill_device = {
 	.name	= "rfkill_gpio",
 	.id	= -1,
-	.dev	= {
-		.platform_data = &wifi_rfkill_platform_data,
-	},
 };
 
 static struct gpiod_lookup_table wifi_gpio_lookup = {
 	.dev_id = "rfkill_gpio",
 	.table = {
-		GPIO_LOOKUP_IDX("tegra-gpio", 25, NULL, 0, 0),
-		GPIO_LOOKUP_IDX("tegra-gpio", 85, NULL, 1, 0),
+		GPIO_LOOKUP("tegra-gpio", 25, "reset", 0),
+		GPIO_LOOKUP("tegra-gpio", 85, "shutdown", 0),
 		{ },
 	},
 };
 
 void __init tegra_paz00_wifikill_init(void)
 {
+	platform_device_add_properties(&wifi_rfkill_device, wifi_rfkill_prop);
 	gpiod_add_lookup_table(&wifi_gpio_lookup);
 	platform_device_register(&wifi_rfkill_device);
 }
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 5900cc44f..4cc00e993 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -1,4 +1,26 @@
-extern struct smp_operations tegra_smp_ops;
+/*
+ * Copyright (c) 2011, ARM Ltd.
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_COMMON_H
+#define __MACH_TEGRA_COMMON_H
+
+extern const struct smp_operations tegra_smp_ops;
 
 extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);
+
+#endif
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index 155807fa6..d3aa9be16 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -24,7 +24,9 @@
 #include <asm/cpuidle.h>
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
+#include <asm/psci.h>
 
+#include "cpuidle.h"
 #include "pm.h"
 #include "sleep.h"
 
@@ -44,16 +46,12 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev,
 	tegra_set_cpu_in_lp2();
 	cpu_pm_enter();
 
-	tick_broadcast_enter();
-
 	call_firmware_op(prepare_idle);
 
 	/* Do suspend by ourselves if the firmware does not implement it */
 	if (call_firmware_op(do_idle, 0) == -ENOSYS)
 		cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
 
-	tick_broadcast_exit();
-
 	cpu_pm_exit();
 	tegra_clear_cpu_in_lp2();
 
@@ -61,6 +59,13 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev,
 
 	return index;
 }
+
+static void tegra114_idle_enter_freeze(struct cpuidle_device *dev,
+				       struct cpuidle_driver *drv,
+				       int index)
+{
+       tegra114_idle_power_down(dev, drv, index);
+}
 #endif
 
 static struct cpuidle_driver tegra_idle_driver = {
@@ -72,8 +77,10 @@ static struct cpuidle_driver tegra_idle_driver = {
 #ifdef CONFIG_PM_SLEEP
 		[1] = {
 			.enter			= tegra114_idle_power_down,
+			.enter_freeze		= tegra114_idle_enter_freeze,
 			.exit_latency		= 500,
 			.target_residency	= 1000,
+			.flags			= CPUIDLE_FLAG_TIMER_STOP,
 			.power_usage		= 0,
 			.name			= "powered-down",
 			.desc			= "CPU power gated",
@@ -84,5 +91,8 @@ static struct cpuidle_driver tegra_idle_driver = {
 
 int __init tegra114_cpuidle_init(void)
 {
-	return cpuidle_register(&tegra_idle_driver, NULL);
+	if (!psci_smp_available())
+		return cpuidle_register(&tegra_idle_driver, NULL);
+
+	return 0;
 }
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
index 7469347b1..afcee04f2 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra20.c
@@ -30,6 +30,7 @@
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
 
+#include "cpuidle.h"
 #include "flowctrl.h"
 #include "iomap.h"
 #include "irq.h"
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
index 4dbe1dae9..c1417361e 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra30.c
@@ -30,6 +30,7 @@
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
 
+#include "cpuidle.h"
 #include "pm.h"
 #include "sleep.h"
 
diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h
index c017dab60..dd1624d4b 100644
--- a/arch/arm/mach-tegra/cpuidle.h
+++ b/arch/arm/mach-tegra/cpuidle.h
@@ -23,8 +23,10 @@ void tegra20_cpuidle_pcie_irqs_in_use(void);
 int tegra30_cpuidle_init(void);
 int tegra114_cpuidle_init(void);
 void tegra_cpuidle_init(void);
+void tegra_cpuidle_pcie_irqs_in_use(void);
 #else
 static inline void tegra_cpuidle_init(void) {}
+static inline void tegra_cpuidle_pcie_irqs_in_use(void) {}
 #endif
 
 #endif
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index 6fc71f153..8ec707826 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -17,6 +17,7 @@
 
 #include <asm/smp_plat.h>
 
+#include "common.h"
 #include "sleep.h"
 
 static void (*tegra_hotplug_shutdown)(void);
@@ -37,7 +38,7 @@ int tegra_cpu_kill(unsigned cpu)
  *
  * Called with IRQs disabled
  */
-void __ref tegra_cpu_die(unsigned int cpu)
+void tegra_cpu_die(unsigned int cpu)
 {
 	if (!tegra_hotplug_shutdown) {
 		WARN(1, "hotplug is not yet initialized\n");
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 81dc950b4..9e5b2f869 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -82,9 +82,6 @@
 #define TEGRA_EMC_BASE			0x7000F400
 #define TEGRA_EMC_SIZE			SZ_1K
 
-#define TEGRA_FUSE_BASE			0x7000F800
-#define TEGRA_FUSE_SIZE			SZ_1K
-
 #define TEGRA_EMC0_BASE			0x7001A000
 #define TEGRA_EMC0_SIZE			SZ_2K
 
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 3b9098d27..a69b22d37 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -29,6 +29,7 @@
 
 #include "board.h"
 #include "iomap.h"
+#include "irq.h"
 
 #define SGI_MASK 0xFFFF
 
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index b45086666..75620ae73 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -108,19 +108,9 @@ static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * be un-gated by un-toggling the power gate register
 	 * manually.
 	 */
-	if (!tegra_pmc_cpu_is_powered(cpu)) {
-		ret = tegra_pmc_cpu_power_on(cpu);
-		if (ret)
-			return ret;
-
-		/* Wait for the power to come up. */
-		timeout = jiffies + msecs_to_jiffies(100);
-		while (!tegra_pmc_cpu_is_powered(cpu)) {
-			if (time_after(jiffies, timeout))
-				return -ETIMEDOUT;
-			udelay(10);
-		}
-	}
+	ret = tegra_pmc_cpu_power_on(cpu);
+	if (ret)
+		return ret;
 
 remove_clamps:
 	/* CPU partition is powered. Enable the CPU clock. */
@@ -192,7 +182,7 @@ static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
 		scu_enable(IO_ADDRESS(scu_a9_get_base()));
 }
 
-struct smp_operations tegra_smp_ops __initdata = {
+const struct smp_operations tegra_smp_ops __initconst = {
 	.smp_prepare_cpus	= tegra_smp_prepare_cpus,
 	.smp_secondary_init	= tegra_secondary_init,
 	.smp_boot_secondary	= tegra_boot_secondary,
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index 83bc87583..717b48f22 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -36,7 +36,7 @@ void tegra30_sleep_core_init(void);
 
 void tegra_clear_cpu_in_lp2(void);
 bool tegra_set_cpu_in_lp2(void);
-
+int tegra_cpu_do_idle(void);
 void tegra_idle_lp2_last(void);
 extern void (*tegra_tear_down_cpu)(void);
 
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index e6b684e14..f5d196674 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -231,8 +231,11 @@ ENDPROC(tegra20_cpu_is_resettable_soon)
  * tegra20_tear_down_core in IRAM
  */
 ENTRY(tegra20_sleep_core_finish)
+	mov     r4, r0
 	/* Flush, disable the L1 data cache and exit SMP */
+	mov     r0, #TEGRA_FLUSH_CACHE_ALL
 	bl	tegra_disable_clean_inv_dcache
+	mov     r0, r4
 
 	mov32	r3, tegra_shut_off_mmu
 	add	r3, r3, r0
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 9a2f0b051..16e5ff033 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -242,8 +242,11 @@ ENDPROC(tegra30_cpu_shutdown)
  * tegra30_tear_down_core in IRAM
  */
 ENTRY(tegra30_sleep_core_finish)
+	mov	r4, r0
 	/* Flush, disable the L1 data cache and exit SMP */
+	mov	r0, #TEGRA_FLUSH_CACHE_ALL
 	bl	tegra_disable_clean_inv_dcache
+	mov	r0, r4
 
 	/*
 	 * Preload all the address literals that are needed for the
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 2378fa560..e01cbca19 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -115,35 +115,17 @@ static void __init tegra_dt_init(void)
 	 * devices
 	 */
 out:
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 }
 
-static void __init paz00_init(void)
-{
-	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
-		tegra_paz00_wifikill_init();
-}
-
-static struct {
-	char *machine;
-	void (*init)(void);
-} board_init_funcs[] = {
-	{ "compal,paz00", paz00_init },
-};
-
 static void __init tegra_dt_init_late(void)
 {
-	int i;
-
 	tegra_init_suspend();
 	tegra_cpuidle_init();
 
-	for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
-		if (of_machine_is_compatible(board_init_funcs[i].machine)) {
-			board_init_funcs[i].init();
-			break;
-		}
-	}
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
+	    of_machine_is_compatible("compal,paz00"))
+		tegra_paz00_wifikill_init();
 }
 
 static const char * const tegra_dt_board_compat[] = {
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index bc51a7139..22dcbf5b7 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,11 +1,11 @@
 menuconfig ARCH_U300
-	bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
+	bool "ST-Ericsson U300 Series"
+	depends on ARCH_MULTI_V5 && MMU
 	select ARM_AMBA
 	select ARM_VIC
-	select CLKSRC_MMIO
+	select U300_TIMER
 	select CPU_ARM926T
+	select GPIOLIB
 	select HAVE_TCM
 	select PINCTRL
 	select PINCTRL_COH901
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
deleted file mode 100644
index 87811de0b..000000000
--- a/arch/arm/mach-u300/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x48008000
-params_phys-y	:= 0x48000100
-# This isn't used.
-#initrd_phys-y	:= 0x48800000
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 35670b15f..a4910ea68 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -391,8 +391,7 @@ static void __init u300_init_machine_dt(void)
 	pinctrl_register_mappings(u300_pinmux_map,
 				  ARRAY_SIZE(u300_pinmux_map));
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			u300_auxdata_lookup, NULL);
+	of_platform_default_populate(NULL, u300_auxdata_lookup, NULL);
 
 	/* Enable SEMI self refresh */
 	val = readw(syscon_base + U300_SYSCON_SMCR) |
@@ -408,7 +407,7 @@ static const char * u300_board_compat[] = {
 DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)")
 	.map_io		= u300_map_io,
 	.init_irq	= u300_init_irq_dt,
-	.init_time	= clocksource_of_init,
+	.init_time	= clocksource_probe,
 	.init_machine	= u300_init_machine_dt,
 	.restart	= u300_restart,
 	.dt_compat      = u300_board_compat,
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
index 131996805..68fe986ca 100644
--- a/arch/arm/mach-u300/dummyspichip.c
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -264,7 +264,6 @@ static const struct of_device_id pl022_dummy_dt_match[] = {
 static struct spi_driver pl022_dummy_driver = {
 	.driver = {
 		.name	= "spi-dummy",
-		.owner	= THIS_MODULE,
 		.of_match_table = pl022_dummy_dt_match,
 	},
 	.probe	= pl022_dummy_probe,
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index b640458fd..82dddee3a 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -6,6 +6,7 @@ config ARCH_UNIPHIER
 	select ARM_GIC
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
+	select PINCTRL
 	help
 	  Support for UniPhier SoC family developed by Socionext Inc.
 	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 60bd2265f..396afe109 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -1,2 +1 @@
-obj-y			:= uniphier.o
-obj-$(CONFIG_SMP)	+= platsmp.o
+obj-$(CONFIG_SMP)	+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-uniphier/headsmp.S b/arch/arm/mach-uniphier/headsmp.S
new file mode 100644
index 000000000..c819dff84
--- /dev/null
+++ b/arch/arm/mach-uniphier/headsmp.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cp15.h>
+
+ENTRY(uniphier_smp_trampoline)
+ARM_BE8(setend	be)			@ ensure we are in BE8 mode
+	mrc	p15, 0, r0, c0, c0, 5	@ MPIDR (Multiprocessor Affinity Reg)
+	and  	r2, r0, #0x3		@ CPU ID
+	ldr	r1, uniphier_smp_trampoline_jump
+	ldr	r3, uniphier_smp_trampoline_poll_addr
+	mrc	p15, 0, r0, c1, c0, 0	@ SCTLR (System Control Register)
+	orr	r0, r0, #CR_I		@ Enable ICache
+	bic	r0, r0, #(CR_C | CR_M)	@ Disable MMU and Dcache
+	mcr	p15, 0, r0, c1, c0, 0
+	b	1f			@ cache the following 5 instructions
+0:	wfe
+1:	ldr	r0, [r3]
+	cmp	r0, r2
+	bxeq	r1			@ branch to secondary_startup
+	b	0b
+	.globl	uniphier_smp_trampoline_jump
+uniphier_smp_trampoline_jump:
+	.word	0			@ set virt_to_phys(secondary_startup)
+	.globl	uniphier_smp_trampoline_poll_addr
+uniphier_smp_trampoline_poll_addr:
+	.word	0			@ set CPU ID to be kicked to this reg
+	.globl	uniphier_smp_trampoline_end
+uniphier_smp_trampoline_end:
+ENDPROC(uniphier_smp_trampoline)
diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c
index 5943e1cb7..9978c4112 100644
--- a/arch/arm/mach-uniphier/platsmp.c
+++ b/arch/arm/mach-uniphier/platsmp.c
@@ -12,79 +12,198 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/sizes.h>
-#include <linux/compiler.h>
+#define pr_fmt(fmt)		"uniphier: " fmt
+
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/regmap.h>
-#include <linux/mfd/syscon.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/sizes.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/pgtable.h>
 #include <asm/smp.h>
 #include <asm/smp_scu.h>
 
-static struct regmap *sbcm_regmap;
+/*
+ * The secondary CPUs check this register from the boot ROM for the jump
+ * destination.  After that, it can be reused as a scratch register.
+ */
+#define UNIPHIER_SMPCTRL_ROM_RSV2	0x208
 
-static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+static void __iomem *uniphier_smp_rom_boot_rsv2;
+static unsigned int uniphier_smp_max_cpus;
+
+extern char uniphier_smp_trampoline;
+extern char uniphier_smp_trampoline_jump;
+extern char uniphier_smp_trampoline_poll_addr;
+extern char uniphier_smp_trampoline_end;
+
+/*
+ * Copy trampoline code to the tail of the 1st section of the page table used
+ * in the boot ROM.  This area is directly accessible by the secondary CPUs
+ * for all the UniPhier SoCs.
+ */
+static const phys_addr_t uniphier_smp_trampoline_dest_end = SECTION_SIZE;
+static phys_addr_t uniphier_smp_trampoline_dest;
+
+static int __init uniphier_smp_copy_trampoline(phys_addr_t poll_addr)
 {
-	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-	unsigned long scu_base_phys = 0;
-	void __iomem *scu_base;
+	size_t trmp_size;
+	static void __iomem *trmp_base;
 
-	sbcm_regmap = syscon_regmap_lookup_by_compatible(
-			"socionext,uniphier-system-bus-controller-misc");
-	if (IS_ERR(sbcm_regmap)) {
-		pr_err("failed to regmap system-bus-controller-misc\n");
-		goto err;
+	if (!uniphier_cache_l2_is_enabled()) {
+		pr_warn("outer cache is needed for SMP, but not enabled\n");
+		return -ENODEV;
+	}
+
+	uniphier_cache_l2_set_locked_ways(1);
+
+	outer_flush_all();
+
+	trmp_size = &uniphier_smp_trampoline_end - &uniphier_smp_trampoline;
+	uniphier_smp_trampoline_dest = uniphier_smp_trampoline_dest_end -
+								trmp_size;
+
+	uniphier_cache_l2_touch_range(uniphier_smp_trampoline_dest,
+				      uniphier_smp_trampoline_dest_end);
+
+	trmp_base = ioremap_cache(uniphier_smp_trampoline_dest, trmp_size);
+	if (!trmp_base) {
+		pr_err("failed to map trampoline destination area\n");
+		return -ENOMEM;
+	}
+
+	memcpy(trmp_base, &uniphier_smp_trampoline, trmp_size);
+
+	writel(virt_to_phys(secondary_startup),
+	       trmp_base + (&uniphier_smp_trampoline_jump -
+			    &uniphier_smp_trampoline));
+
+	writel(poll_addr, trmp_base + (&uniphier_smp_trampoline_poll_addr -
+				       &uniphier_smp_trampoline));
+
+	flush_cache_all();	/* flush out trampoline code to outer cache */
+
+	iounmap(trmp_base);
+
+	return 0;
+}
+
+static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
+{
+	struct device_node *np;
+	struct resource res;
+	phys_addr_t rom_rsv2_phys;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl");
+	ret = of_address_to_resource(np, 0, &res);
+	of_node_put(np);
+	if (ret) {
+		pr_err("failed to get resource of SMP control\n");
+		return ret;
+	}
+
+	rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
+
+	ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
+	if (ret)
+		return ret;
+
+	uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
+	if (!uniphier_smp_rom_boot_rsv2) {
+		pr_err("failed to map ROM_BOOT_RSV2 register\n");
+		return -ENOMEM;
 	}
 
+	writel(uniphier_smp_trampoline_dest, uniphier_smp_rom_boot_rsv2);
+	asm("sev"); /* Bring up all secondary CPUs to the trampoline code */
+
+	uniphier_smp_max_cpus = max_cpus;	/* save for later use */
+
+	return 0;
+}
+
+static void __init uniphier_smp_unprepare_trampoline(void)
+{
+	iounmap(uniphier_smp_rom_boot_rsv2);
+
+	if (uniphier_smp_trampoline_dest)
+		outer_inv_range(uniphier_smp_trampoline_dest,
+				uniphier_smp_trampoline_dest_end);
+
+	uniphier_cache_l2_set_locked_ways(0);
+}
+
+static int __init uniphier_smp_enable_scu(void)
+{
+	unsigned long scu_base_phys = 0;
+	void __iomem *scu_base;
+
 	if (scu_a9_has_base())
 		scu_base_phys = scu_a9_get_base();
 
 	if (!scu_base_phys) {
 		pr_err("failed to get scu base\n");
-		goto err;
+		return -ENODEV;
 	}
 
 	scu_base = ioremap(scu_base_phys, SZ_128);
 	if (!scu_base) {
-		pr_err("failed to remap scu base (0x%08lx)\n", scu_base_phys);
-		goto err;
+		pr_err("failed to map scu base\n");
+		return -ENOMEM;
 	}
 
 	scu_enable(scu_base);
 	iounmap(scu_base);
 
+	return 0;
+}
+
+static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+{
+	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+	int ret;
+
+	ret = uniphier_smp_prepare_trampoline(max_cpus);
+	if (ret)
+		goto err;
+
+	ret = uniphier_smp_enable_scu();
+	if (ret)
+		goto err;
+
 	return;
 err:
 	pr_warn("disabling SMP\n");
 	init_cpu_present(&only_cpu_0);
-	sbcm_regmap = NULL;
+	uniphier_smp_unprepare_trampoline();
 }
 
-static void __naked uniphier_secondary_startup(void)
+static int __init uniphier_smp_boot_secondary(unsigned int cpu,
+					      struct task_struct *idle)
 {
-	asm("bl		v7_invalidate_l1\n"
-	    "b		secondary_startup\n");
-};
+	if (WARN_ON_ONCE(!uniphier_smp_rom_boot_rsv2))
+		return -EFAULT;
 
-static int uniphier_boot_secondary(unsigned int cpu,
-				   struct task_struct *idle)
-{
-	int ret;
+	writel(cpu, uniphier_smp_rom_boot_rsv2);
+	readl(uniphier_smp_rom_boot_rsv2); /* relax */
 
-	if (!sbcm_regmap)
-		return -ENODEV;
+	asm("sev"); /* wake up secondary CPUs sleeping in the trampoline */
 
-	ret = regmap_write(sbcm_regmap, 0x1208,
-			   virt_to_phys(uniphier_secondary_startup));
-	if (!ret)
-		asm("sev"); /* wake up secondary CPU */
+	if (cpu == uniphier_smp_max_cpus - 1) {
+		/* clean up resources if this is the last CPU */
+		uniphier_smp_unprepare_trampoline();
+	}
 
-	return ret;
+	return 0;
 }
 
-struct smp_operations uniphier_smp_ops __initdata = {
+static const struct smp_operations uniphier_smp_ops __initconst = {
 	.smp_prepare_cpus	= uniphier_smp_prepare_cpus,
-	.smp_boot_secondary	= uniphier_boot_secondary,
+	.smp_boot_secondary	= uniphier_smp_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp",
 		      &uniphier_smp_ops);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c9ac19b24..4740ac393 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,15 +1,15 @@
 menuconfig ARCH_U8500
-	bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
-	depends on MMU
+	bool "ST-Ericsson U8500 Series"
+	depends on ARCH_MULTI_V7 && MMU
 	select AB8500_CORE
 	select ABX500_CORE
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CACHE_L2X0
 	select CLKSRC_NOMADIK_MTU
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
@@ -32,6 +32,7 @@ config UX500_SOC_DB8500
 	select PINCTRL_AB8540
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
+	select CLKSRC_DBX500_PRCMU
 	select PM_GENERIC_DOMAINS if PM
 
 config MACH_MOP500
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 4418a5078..56d0eb6e2 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,12 +2,10 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o id.o timer.o pm.o
-obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
+obj-y				:= pm.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500-regulators.o \
-				board-mop500-audio.o
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_MACH_MOP500)	+= board-mop500-audio.o
+obj-$(CONFIG_SMP)		+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
deleted file mode 100644
index 760a0efe7..000000000
--- a/arch/arm/mach-ux500/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
deleted file mode 100644
index 32d744e91..000000000
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ /dev/null
@@ -1,1065 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Authors: Sundar Iyer <sundar.iyer@stericsson.com>
- *          Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- *          Daniel Willerud <daniel.willerud@stericsson.com>
- *
- * MOP500 board specific initialization for regulators
- */
-#include <linux/kernel.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
-#include "board-mop500-regulators.h"
-#include "id.h"
-
-static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
-       REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-struct regulator_init_data gpio_en_3v3_regulator = {
-       .constraints = {
-               .name = "EN-3V3",
-               .min_uV = 3300000,
-               .max_uV = 3300000,
-               .valid_ops_mask = REGULATOR_CHANGE_STATUS,
-       },
-       .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
-       .consumer_supplies = gpio_en_3v3_consumers,
-};
-
-/*
- * TPS61052 regulator
- */
-static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
-	/*
-	 * Boost converter supply to raise voltage on audio speaker, this
-	 * is actually connected to three pins, VInVhfL (left amplifier)
-	 * VInVhfR (right amplifier) and VIntDClassInt - all three must
-	 * be connected to the same voltage.
-	 */
-	REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
-};
-
-struct regulator_init_data tps61052_regulator = {
-	.constraints = {
-		.name = "vaudio-hf",
-		.min_uV = 4500000,
-		.max_uV = 4500000,
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
-	.consumer_supplies = tps61052_vaudio_consumers,
-};
-
-static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
-	/* Main display, u8500 R3 uib */
-	REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
-	/* Main display, u8500 uib and ST uib */
-	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
-	/* Secondary display, ST uib */
-	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
-	/* SFH7741 proximity sensor */
-	REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
-	/* BH1780GLS ambient light sensor */
-	REGULATOR_SUPPLY("vcc", "2-0029"),
-	/* lsm303dlh accelerometer */
-	REGULATOR_SUPPLY("vdd", "2-0018"),
-	/* lsm303dlhc accelerometer */
-	REGULATOR_SUPPLY("vdd", "2-0019"),
-	/* lsm303dlh magnetometer */
-	REGULATOR_SUPPLY("vdd", "2-001e"),
-	/* Rohm BU21013 Touchscreen devices */
-	REGULATOR_SUPPLY("avdd", "3-005c"),
-	REGULATOR_SUPPLY("avdd", "3-005d"),
-	/* Synaptics RMI4 Touchscreen device */
-	REGULATOR_SUPPLY("vdd", "3-004b"),
-	/* L3G4200D Gyroscope device */
-	REGULATOR_SUPPLY("vdd", "2-0068"),
-	/* Ambient light sensor device */
-	REGULATOR_SUPPLY("vdd", "3-0029"),
-	/* Pressure sensor device */
-	REGULATOR_SUPPLY("vdd", "2-005c"),
-	/* Cypress TrueTouch Touchscreen device */
-	REGULATOR_SUPPLY("vcpin", "spi8.0"),
-	/* Camera device */
-	REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
-	/* On-board eMMC power */
-	REGULATOR_SUPPLY("vmmc", "sdi4"),
-	/* AB8500 audio codec */
-	REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
-	/* AB8500 accessory detect 1 */
-	REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
-	/* AB8500 Tv-out device */
-	REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
-	/* AV8100 HDMI device */
-	REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
-	REGULATOR_SUPPLY("v-SD-STM", "stm"),
-	/* External MMC slot power */
-	REGULATOR_SUPPLY("vmmc", "sdi0"),
-};
-
-static struct regulator_consumer_supply ab8505_vaux4_consumers[] = {
-};
-
-static struct regulator_consumer_supply ab8505_vaux5_consumers[] = {
-};
-
-static struct regulator_consumer_supply ab8505_vaux6_consumers[] = {
-};
-
-static struct regulator_consumer_supply ab8505_vaux8_consumers[] = {
-	/* AB8500 audio codec device */
-	REGULATOR_SUPPLY("v-aux8", NULL),
-};
-
-static struct regulator_consumer_supply ab8505_vadc_consumers[] = {
-	/* Internal general-purpose ADC */
-	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
-	/* ADC for charger */
-	REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
-	/* TV-out DENC supply */
-	REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
-	/* Internal general-purpose ADC */
-	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
-	/* ADC for charger */
-	REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
-	/* AB8500 Tv-out device */
-	REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
-};
-
-static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
-	/* AB8500 audio-codec main supply */
-	REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
-	/* AB8500 audio-codec Mic1 supply */
-	REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
-	/* AB8500 audio-codec Mic2 supply */
-	REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
-	/* AB8500 audio-codec DMic supply */
-	REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
-	/* SoC core supply, no device */
-	REGULATOR_SUPPLY("v-intcore", NULL),
-	/* USB Transceiver */
-	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
-	/* Handled by abx500 clk driver */
-	REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
-};
-
-static struct regulator_consumer_supply ab8505_usb_consumers[] = {
-	/* HS USB OTG physical interface */
-	REGULATOR_SUPPLY("v-ape", NULL),
-};
-
-static struct regulator_consumer_supply ab8500_vana_consumers[] = {
-	/* DB8500 DSI */
-	REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
-	REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
-	REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
-	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
-	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
-	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
-	/* DB8500 CSI */
-	REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
-};
-
-/* ab8500 regulator register initialization */
-static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
-	/*
-	 * VanaRequestCtrl          = HP/LP depending on VxRequest
-	 * VextSupply1RequestCtrl   = HP/LP depending on VxRequest
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2,       0xf0, 0x00),
-	/*
-	 * VextSupply2RequestCtrl   = HP/LP depending on VxRequest
-	 * VextSupply3RequestCtrl   = HP/LP depending on VxRequest
-	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
-	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3,       0xff, 0x00),
-	/*
-	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
-	 * SwHPReq                  = Control through SWValid disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4,       0x07, 0x00),
-	/*
-	 * VanaSysClkReq1HPValid    = disabled
-	 * Vaux1SysClkReq1HPValid   = disabled
-	 * Vaux2SysClkReq1HPValid   = disabled
-	 * Vaux3SysClkReq1HPValid   = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
-	/*
-	 * VextSupply1SysClkReq1HPValid = disabled
-	 * VextSupply2SysClkReq1HPValid = disabled
-	 * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
-	/*
-	 * VanaHwHPReq1Valid        = disabled
-	 * Vaux1HwHPreq1Valid       = disabled
-	 * Vaux2HwHPReq1Valid       = disabled
-	 * Vaux3HwHPReqValid        = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1,     0xe8, 0x00),
-	/*
-	 * VextSupply1HwHPReq1Valid = disabled
-	 * VextSupply2HwHPReq1Valid = disabled
-	 * VextSupply3HwHPReq1Valid = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2,     0x07, 0x00),
-	/*
-	 * VanaHwHPReq2Valid        = disabled
-	 * Vaux1HwHPReq2Valid       = disabled
-	 * Vaux2HwHPReq2Valid       = disabled
-	 * Vaux3HwHPReq2Valid       = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1,     0xe8, 0x00),
-	/*
-	 * VextSupply1HwHPReq2Valid = disabled
-	 * VextSupply2HwHPReq2Valid = disabled
-	 * VextSupply3HwHPReq2Valid = HWReq2 controlled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2,     0x07, 0x04),
-	/*
-	 * VanaSwHPReqValid         = disabled
-	 * Vaux1SwHPReqValid        = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1,      0xa0, 0x00),
-	/*
-	 * Vaux2SwHPReqValid        = disabled
-	 * Vaux3SwHPReqValid        = disabled
-	 * VextSupply1SwHPReqValid  = disabled
-	 * VextSupply2SwHPReqValid  = disabled
-	 * VextSupply3SwHPReqValid  = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2,      0x1f, 0x00),
-	/*
-	 * SysClkReq2Valid1         = SysClkReq2 controlled
-	 * SysClkReq3Valid1         = disabled
-	 * SysClkReq4Valid1         = SysClkReq4 controlled
-	 * SysClkReq5Valid1         = disabled
-	 * SysClkReq6Valid1         = SysClkReq6 controlled
-	 * SysClkReq7Valid1         = disabled
-	 * SysClkReq8Valid1         = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1,    0xfe, 0x2a),
-	/*
-	 * SysClkReq2Valid2         = disabled
-	 * SysClkReq3Valid2         = disabled
-	 * SysClkReq4Valid2         = disabled
-	 * SysClkReq5Valid2         = disabled
-	 * SysClkReq6Valid2         = SysClkReq6 controlled
-	 * SysClkReq7Valid2         = disabled
-	 * SysClkReq8Valid2         = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2,    0xfe, 0x20),
-	/*
-	 * VTVoutEna                = disabled
-	 * Vintcore12Ena            = disabled
-	 * Vintcore12Sel            = 1.25 V
-	 * Vintcore12LP             = inactive (HP)
-	 * VTVoutLP                 = inactive (HP)
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1,              0xfe, 0x10),
-	/*
-	 * VaudioEna                = disabled
-	 * VdmicEna                 = disabled
-	 * Vamic1Ena                = disabled
-	 * Vamic2Ena                = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY,           0x1e, 0x00),
-	/*
-	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
-	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC,         0x03, 0x00),
-	/*
-	 * VPll                     = Hw controlled (NOTE! PRCMU bits)
-	 * VanaRegu                 = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU,           0x0f, 0x02),
-	/*
-	 * VrefDDREna               = disabled
-	 * VrefDDRSleepMode         = inactive (no pulldown)
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VREFDDR,                0x03, 0x00),
-	/*
-	 * VextSupply1Regu          = force LP
-	 * VextSupply2Regu          = force OFF
-	 * VextSupply3Regu          = force HP (-> STBB2=LP and TPS=LP)
-	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
-	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU,          0xff, 0x13),
-	/*
-	 * Vaux1Regu                = force HP
-	 * Vaux2Regu                = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU,             0x0f, 0x01),
-	/*
-	 * Vaux3Regu                = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU,          0x03, 0x00),
-	/*
-	 * Vaux1Sel                 = 2.8 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL,               0x0f, 0x0C),
-	/*
-	 * Vaux2Sel                 = 2.9 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL,               0x0f, 0x0d),
-	/*
-	 * Vaux3Sel                 = 2.91 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL,           0x07, 0x07),
-	/*
-	 * VextSupply12LP           = disabled (no LP)
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE,         0x01, 0x00),
-	/*
-	 * Vaux1Disch               = short discharge time
-	 * Vaux2Disch               = short discharge time
-	 * Vaux3Disch               = short discharge time
-	 * Vintcore12Disch          = short discharge time
-	 * VTVoutDisch              = short discharge time
-	 * VaudioDisch              = short discharge time
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH,          0xfc, 0x00),
-	/*
-	 * VanaDisch                = short discharge time
-	 * VdmicPullDownEna         = pulldown disabled when Vdmic is disabled
-	 * VdmicDisch               = short discharge time
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2,         0x16, 0x00),
-};
-
-/* AB8500 regulators */
-static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
-	/* supplies to the display/camera */
-	[AB8500_LDO_AUX1] = {
-		.supply_regulator = "ab8500-ext-supply3",
-		.constraints = {
-			.name = "V-DISPLAY",
-			.min_uV = 2800000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1, /* display is on at boot */
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
-		.consumer_supplies = ab8500_vaux1_consumers,
-	},
-	/* supplies to the on-board eMMC */
-	[AB8500_LDO_AUX2] = {
-		.supply_regulator = "ab8500-ext-supply3",
-		.constraints = {
-			.name = "V-eMMC1",
-			.min_uV = 1100000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
-		.consumer_supplies = ab8500_vaux2_consumers,
-	},
-	/* supply for VAUX3, supplies to SDcard slots */
-	[AB8500_LDO_AUX3] = {
-		.supply_regulator = "ab8500-ext-supply3",
-		.constraints = {
-			.name = "V-MMC-SD",
-			.min_uV = 1100000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
-		.consumer_supplies = ab8500_vaux3_consumers,
-	},
-	/* supply for tvout, gpadc, TVOUT LDO */
-	[AB8500_LDO_TVOUT] = {
-		.constraints = {
-			.name = "V-TVOUT",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
-		.consumer_supplies = ab8500_vtvout_consumers,
-	},
-	/* supply for ab8500-vaudio, VAUDIO LDO */
-	[AB8500_LDO_AUDIO] = {
-		.constraints = {
-			.name = "V-AUD",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
-		.consumer_supplies = ab8500_vaud_consumers,
-	},
-	/* supply for v-anamic1 VAMic1-LDO */
-	[AB8500_LDO_ANAMIC1] = {
-		.constraints = {
-			.name = "V-AMIC1",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
-		.consumer_supplies = ab8500_vamic1_consumers,
-	},
-	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
-	[AB8500_LDO_ANAMIC2] = {
-		.constraints = {
-			.name = "V-AMIC2",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
-		.consumer_supplies = ab8500_vamic2_consumers,
-	},
-	/* supply for v-dmic, VDMIC LDO */
-	[AB8500_LDO_DMIC] = {
-		.constraints = {
-			.name = "V-DMIC",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
-		.consumer_supplies = ab8500_vdmic_consumers,
-	},
-	/* supply for v-intcore12, VINTCORE12 LDO */
-	[AB8500_LDO_INTCORE] = {
-		.constraints = {
-			.name = "V-INTCORE",
-			.min_uV = 1250000,
-			.max_uV = 1350000,
-			.input_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE |
-					  REGULATOR_CHANGE_DRMS,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
-		.consumer_supplies = ab8500_vintcore_consumers,
-	},
-	/* supply for U8500 CSI-DSI, VANA LDO */
-	[AB8500_LDO_ANA] = {
-		.constraints = {
-			.name = "V-CSI-DSI",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
-		.consumer_supplies = ab8500_vana_consumers,
-	},
-};
-
-/* supply for VextSupply3 */
-static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
-	/* SIM supply for 3 V SIM cards */
-	REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
-};
-
-/* extended configuration for VextSupply2, only used for HREFP_V20 boards */
-static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = {
-	.hwreq = true,
-};
-
-/*
- * AB8500 external regulators
- */
-static struct regulator_init_data ab8500_ext_regulators[] = {
-	/* fixed Vbat supplies VSMPS1_EXT_1V8 */
-	[AB8500_EXT_SUPPLY1] = {
-		.constraints = {
-			.name = "ab8500-ext-supply1",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.initial_mode = REGULATOR_MODE_IDLE,
-			.boot_on = 1,
-			.always_on = 1,
-		},
-	},
-	/* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
-	[AB8500_EXT_SUPPLY2] = {
-		.constraints = {
-			.name = "ab8500-ext-supply2",
-			.min_uV = 1360000,
-			.max_uV = 1360000,
-		},
-	},
-	/* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
-	[AB8500_EXT_SUPPLY3] = {
-		.constraints = {
-			.name = "ab8500-ext-supply3",
-			.min_uV = 3400000,
-			.max_uV = 3400000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies =
-			ARRAY_SIZE(ab8500_ext_supply3_consumers),
-		.consumer_supplies = ab8500_ext_supply3_consumers,
-	},
-};
-
-/* ab8505 regulator register initialization */
-static struct ab8500_regulator_reg_init ab8505_reg_init[] = {
-	/*
-	 * VarmRequestCtrl
-	 * VsmpsCRequestCtrl
-	 * VsmpsARequestCtrl
-	 * VsmpsBRequestCtrl
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1,       0x00, 0x00),
-	/*
-	 * VsafeRequestCtrl
-	 * VpllRequestCtrl
-	 * VanaRequestCtrl          = HP/LP depending on VxRequest
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2,       0x30, 0x00),
-	/*
-	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
-	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3,       0xf0, 0x00),
-	/*
-	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
-	 * SwHPReq                  = Control through SWValid disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4,       0x07, 0x00),
-	/*
-	 * VsmpsASysClkReq1HPValid
-	 * VsmpsBSysClkReq1HPValid
-	 * VsafeSysClkReq1HPValid
-	 * VanaSysClkReq1HPValid    = disabled
-	 * VpllSysClkReq1HPValid
-	 * Vaux1SysClkReq1HPValid   = disabled
-	 * Vaux2SysClkReq1HPValid   = disabled
-	 * Vaux3SysClkReq1HPValid   = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
-	/*
-	 * VsmpsCSysClkReq1HPValid
-	 * VarmSysClkReq1HPValid
-	 * VbbSysClkReq1HPValid
-	 * VsmpsMSysClkReq1HPValid
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00),
-	/*
-	 * VsmpsAHwHPReq1Valid
-	 * VsmpsBHwHPReq1Valid
-	 * VsafeHwHPReq1Valid
-	 * VanaHwHPReq1Valid        = disabled
-	 * VpllHwHPReq1Valid
-	 * Vaux1HwHPreq1Valid       = disabled
-	 * Vaux2HwHPReq1Valid       = disabled
-	 * Vaux3HwHPReqValid        = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1,     0xe8, 0x00),
-	/*
-	 * VsmpsMHwHPReq1Valid
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2,     0x00, 0x00),
-	/*
-	 * VsmpsAHwHPReq2Valid
-	 * VsmpsBHwHPReq2Valid
-	 * VsafeHwHPReq2Valid
-	 * VanaHwHPReq2Valid        = disabled
-	 * VpllHwHPReq2Valid
-	 * Vaux1HwHPReq2Valid       = disabled
-	 * Vaux2HwHPReq2Valid       = disabled
-	 * Vaux3HwHPReq2Valid       = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1,     0xe8, 0x00),
-	/*
-	 * VsmpsMHwHPReq2Valid
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2,     0x00, 0x00),
-	/**
-	 * VsmpsCSwHPReqValid
-	 * VarmSwHPReqValid
-	 * VsmpsASwHPReqValid
-	 * VsmpsBSwHPReqValid
-	 * VsafeSwHPReqValid
-	 * VanaSwHPReqValid
-	 * VanaSwHPReqValid         = disabled
-	 * VpllSwHPReqValid
-	 * Vaux1SwHPReqValid        = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1,      0xa0, 0x00),
-	/*
-	 * Vaux2SwHPReqValid        = disabled
-	 * Vaux3SwHPReqValid        = disabled
-	 * VsmpsMSwHPReqValid
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2,      0x03, 0x00),
-	/*
-	 * SysClkReq2Valid1         = SysClkReq2 controlled
-	 * SysClkReq3Valid1         = disabled
-	 * SysClkReq4Valid1         = SysClkReq4 controlled
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1,    0x0e, 0x0a),
-	/*
-	 * SysClkReq2Valid2         = disabled
-	 * SysClkReq3Valid2         = disabled
-	 * SysClkReq4Valid2         = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2,    0x0e, 0x00),
-	/*
-	 * Vaux4SwHPReqValid
-	 * Vaux4HwHPReq2Valid
-	 * Vaux4HwHPReq1Valid
-	 * Vaux4SysClkReq1HPValid
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID,    0x00, 0x00),
-	/*
-	 * VadcEna                  = disabled
-	 * VintCore12Ena            = disabled
-	 * VintCore12Sel            = 1.25 V
-	 * VintCore12LP             = inactive (HP)
-	 * VadcLP                   = inactive (HP)
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUMISC1,              0xfe, 0x10),
-	/*
-	 * VaudioEna                = disabled
-	 * Vaux8Ena                 = disabled
-	 * Vamic1Ena                = disabled
-	 * Vamic2Ena                = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY,           0x1e, 0x00),
-	/*
-	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
-	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC,         0x03, 0x00),
-	/*
-	 * VsmpsARegu
-	 * VsmpsASelCtrl
-	 * VsmpsAAutoMode
-	 * VsmpsAPWMMode
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU,    0x00, 0x00),
-	/*
-	 * VsmpsBRegu
-	 * VsmpsBSelCtrl
-	 * VsmpsBAutoMode
-	 * VsmpsBPWMMode
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU,    0x00, 0x00),
-	/*
-	 * VsafeRegu
-	 * VsafeSelCtrl
-	 * VsafeAutoMode
-	 * VsafePWMMode
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU,    0x00, 0x00),
-	/*
-	 * VPll                     = Hw controlled (NOTE! PRCMU bits)
-	 * VanaRegu                 = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU,           0x0f, 0x02),
-	/*
-	 * VextSupply1Regu          = force OFF (OTP_ExtSupply12LPnPolarity 1)
-	 * VextSupply2Regu          = force OFF (OTP_ExtSupply12LPnPolarity 1)
-	 * VextSupply3Regu          = force OFF (OTP_ExtSupply3LPnPolarity 0)
-	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
-	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU,          0xff, 0x30),
-	/*
-	 * Vaux1Regu                = force HP
-	 * Vaux2Regu                = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU,             0x0f, 0x01),
-	/*
-	 * Vaux3Regu                = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU,          0x03, 0x00),
-	/*
-	 * VsmpsASel1
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1,    0x00, 0x00),
-	/*
-	 * VsmpsASel2
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2,    0x00, 0x00),
-	/*
-	 * VsmpsASel3
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3,    0x00, 0x00),
-	/*
-	 * VsmpsBSel1
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1,    0x00, 0x00),
-	/*
-	 * VsmpsBSel2
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2,    0x00, 0x00),
-	/*
-	 * VsmpsBSel3
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3,    0x00, 0x00),
-	/*
-	 * VsafeSel1
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1,    0x00, 0x00),
-	/*
-	 * VsafeSel2
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2,    0x00, 0x00),
-	/*
-	 * VsafeSel3
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3,    0x00, 0x00),
-	/*
-	 * Vaux1Sel                 = 2.8 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL,               0x0f, 0x0C),
-	/*
-	 * Vaux2Sel                 = 2.9 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL,               0x0f, 0x0d),
-	/*
-	 * Vaux3Sel                 = 2.91 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL,           0x07, 0x07),
-	/*
-	 * Vaux4RequestCtrl
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL,    0x00, 0x00),
-	/*
-	 * Vaux4Regu
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU,    0x00, 0x00),
-	/*
-	 * Vaux4Sel
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL,    0x00, 0x00),
-	/*
-	 * Vaux1Disch               = short discharge time
-	 * Vaux2Disch               = short discharge time
-	 * Vaux3Disch               = short discharge time
-	 * Vintcore12Disch          = short discharge time
-	 * VTVoutDisch              = short discharge time
-	 * VaudioDisch              = short discharge time
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH,          0xfc, 0x00),
-	/*
-	 * VanaDisch                = short discharge time
-	 * Vaux8PullDownEna         = pulldown disabled when Vaux8 is disabled
-	 * Vaux8Disch               = short discharge time
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2,         0x16, 0x00),
-	/*
-	 * Vaux4Disch               = short discharge time
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3,         0x01, 0x00),
-	/*
-	 * Vaux5Sel
-	 * Vaux5LP
-	 * Vaux5Ena
-	 * Vaux5Disch
-	 * Vaux5DisSfst
-	 * Vaux5DisPulld
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5,              0x00, 0x00),
-	/*
-	 * Vaux6Sel
-	 * Vaux6LP
-	 * Vaux6Ena
-	 * Vaux6DisPulld
-	 */
-	INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6,              0x00, 0x00),
-};
-
-static struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = {
-	/* supplies to the display/camera */
-	[AB8505_LDO_AUX1] = {
-		.constraints = {
-			.name = "V-DISPLAY",
-			.min_uV = 2800000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1, /* display is on at boot */
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
-		.consumer_supplies = ab8500_vaux1_consumers,
-	},
-	/* supplies to the on-board eMMC */
-	[AB8505_LDO_AUX2] = {
-		.constraints = {
-			.name = "V-eMMC1",
-			.min_uV = 1100000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
-		.consumer_supplies = ab8500_vaux2_consumers,
-	},
-	/* supply for VAUX3, supplies to SDcard slots */
-	[AB8505_LDO_AUX3] = {
-		.constraints = {
-			.name = "V-MMC-SD",
-			.min_uV = 1100000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
-		.consumer_supplies = ab8500_vaux3_consumers,
-	},
-	/* supply for VAUX4, supplies to NFC and standalone secure element */
-	[AB8505_LDO_AUX4] = {
-		.constraints = {
-			.name = "V-NFC-SE",
-			.min_uV = 1100000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers),
-		.consumer_supplies = ab8505_vaux4_consumers,
-	},
-	/* supply for VAUX5, supplies to TBD */
-	[AB8505_LDO_AUX5] = {
-		.constraints = {
-			.name = "V-AUX5",
-			.min_uV = 1050000,
-			.max_uV = 2790000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers),
-		.consumer_supplies = ab8505_vaux5_consumers,
-	},
-	/* supply for VAUX6, supplies to TBD */
-	[AB8505_LDO_AUX6] = {
-		.constraints = {
-			.name = "V-AUX6",
-			.min_uV = 1050000,
-			.max_uV = 2790000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers),
-		.consumer_supplies = ab8505_vaux6_consumers,
-	},
-	/* supply for gpadc, ADC LDO */
-	[AB8505_LDO_ADC] = {
-		.constraints = {
-			.name = "V-ADC",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers),
-		.consumer_supplies = ab8505_vadc_consumers,
-	},
-	/* supply for ab8500-vaudio, VAUDIO LDO */
-	[AB8505_LDO_AUDIO] = {
-		.constraints = {
-			.name = "V-AUD",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
-		.consumer_supplies = ab8500_vaud_consumers,
-	},
-	/* supply for v-anamic1 VAMic1-LDO */
-	[AB8505_LDO_ANAMIC1] = {
-		.constraints = {
-			.name = "V-AMIC1",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
-		.consumer_supplies = ab8500_vamic1_consumers,
-	},
-	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
-	[AB8505_LDO_ANAMIC2] = {
-		.constraints = {
-			.name = "V-AMIC2",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
-		.consumer_supplies = ab8500_vamic2_consumers,
-	},
-	/* supply for v-aux8, VAUX8 LDO */
-	[AB8505_LDO_AUX8] = {
-		.constraints = {
-			.name = "V-AUX8",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers),
-		.consumer_supplies = ab8505_vaux8_consumers,
-	},
-	/* supply for v-intcore12, VINTCORE12 LDO */
-	[AB8505_LDO_INTCORE] = {
-		.constraints = {
-			.name = "V-INTCORE",
-			.min_uV = 1250000,
-			.max_uV = 1350000,
-			.input_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE |
-					  REGULATOR_CHANGE_DRMS,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
-		.consumer_supplies = ab8500_vintcore_consumers,
-	},
-	/* supply for LDO USB */
-	[AB8505_LDO_USB] = {
-		.constraints = {
-			.name = "V-USB",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers),
-		.consumer_supplies = ab8505_usb_consumers,
-	},
-	/* supply for U8500 CSI-DSI, VANA LDO */
-	[AB8505_LDO_ANA] = {
-		.constraints = {
-			.name = "V-CSI-DSI",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
-		.consumer_supplies = ab8500_vana_consumers,
-	},
-};
-
-struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
-	.reg_init               = ab8500_reg_init,
-	.num_reg_init           = ARRAY_SIZE(ab8500_reg_init),
-	.regulator              = ab8500_regulators,
-	.num_regulator          = ARRAY_SIZE(ab8500_regulators),
-	.ext_regulator          = ab8500_ext_regulators,
-	.num_ext_regulator      = ARRAY_SIZE(ab8500_ext_regulators),
-};
-
-struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
-	.reg_init               = ab8505_reg_init,
-	.num_reg_init           = ARRAY_SIZE(ab8505_reg_init),
-	.regulator              = ab8505_regulators,
-	.num_regulator          = ARRAY_SIZE(ab8505_regulators),
-};
-
-static void ab8500_modify_reg_init(int id, u8 mask, u8 value)
-{
-	int i;
-
-	if (cpu_is_u8520()) {
-		for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) {
-			if (ab8505_reg_init[i].id == id) {
-				u8 initval = ab8505_reg_init[i].value;
-				initval = (initval & ~mask) | (value & mask);
-				ab8505_reg_init[i].value = initval;
-
-				BUG_ON(mask & ~ab8505_reg_init[i].mask);
-				return;
-			}
-		}
-	} else {
-		for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) {
-			if (ab8500_reg_init[i].id == id) {
-				u8 initval = ab8500_reg_init[i].value;
-				initval = (initval & ~mask) | (value & mask);
-				ab8500_reg_init[i].value = initval;
-
-				BUG_ON(mask & ~ab8500_reg_init[i].mask);
-				return;
-			}
-		}
-	}
-
-	BUG_ON(1);
-}
-
-void mop500_regulator_init(void)
-{
-	struct regulator_init_data *regulator;
-
-	/*
-	 * Temporarily turn on Vaux2 on 8520 machine
-	 */
-	if (cpu_is_u8520()) {
-		/* Vaux2 initialized to be on */
-		ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05);
-	}
-
-	/*
-	 * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for
-	 * all HREFP_V20 boards)
-	 */
-	if (cpu_is_u8500v20()) {
-		/* VextSupply2RequestCtrl =  HP/OFF depending on VxRequest */
-		ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01);
-
-		/* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */
-		ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2,
-			0x20, 0x20);
-
-		/* VextSupply2 = force HP at initialization */
-		ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04);
-
-		/* enable VextSupply2 during platform active */
-		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
-		regulator->constraints.always_on = 1;
-
-		/* disable VextSupply2 in suspend */
-		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
-		regulator->constraints.state_mem.disabled = 1;
-		regulator->constraints.state_standby.disabled = 1;
-
-		/* enable VextSupply2 HW control (used in suspend) */
-		regulator->driver_data = (void *)&ab8500_ext_supply2;
-	}
-}
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
deleted file mode 100644
index 9bece38fe..000000000
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
- *
- * MOP500 board specific initialization for regulators
- */
-
-#ifndef __BOARD_MOP500_REGULATORS_H
-#define __BOARD_MOP500_REGULATORS_H
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
-
-extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
-extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
-extern struct regulator_init_data tps61052_regulator;
-extern struct regulator_init_data gpio_en_3v3_regulator;
-
-void mop500_regulator_init(void);
-
-#endif
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
deleted file mode 100644
index 7557bede7..000000000
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include "db8500-regs.h"
-#include "id.h"
-
-static int __init ux500_l2x0_unlock(void)
-{
-	int i;
-	struct device_node *np;
-	void __iomem *l2x0_base;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
-	l2x0_base = of_iomap(np, 0);
-	of_node_put(np);
-	if (!l2x0_base)
-		return -ENODEV;
-
-	/*
-	 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
-	 * apparently locks both caches before jumping to the kernel. The
-	 * l2x0 core will not touch the unlock registers if the l2x0 is
-	 * already enabled, so we do it right here instead. The PL310 has
-	 * 8 sets of registers, one per possible CPU.
-	 */
-	for (i = 0; i < 8; i++) {
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
-	}
-	iounmap(l2x0_base);
-	return 0;
-}
-
-static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
-{
-	/*
-	 * We can't write to secure registers as we are in non-secure
-	 * mode, until we have some SMI service available.
-	 */
-}
-
-static int __init ux500_l2x0_init(void)
-{
-	/* Multiplatform guard */
-	if (!((cpu_is_u8500_family() || cpu_is_ux540_family())))
-		return -ENODEV;
-
-	/* Unlock before init */
-	ux500_l2x0_unlock();
-	outer_cache.write_sec = ux500_l2c310_write_sec;
-	l2x0_of_init(0, ~0);
-
-	return 0;
-}
-early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 16913800b..46b1da1bf 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -12,41 +12,107 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/arm-ux500-pm.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/dbx500-prcmu.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/perf/arm_pmu.h>
 #include <linux/regulator/machine.h>
-#include <linux/random.h>
 
-#include <asm/pmu.h>
+#include <asm/outercache.h>
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
+#include <asm/mach/arch.h>
 
 #include "setup.h"
 
-#include "board-mop500-regulators.h"
 #include "board-mop500.h"
 #include "db8500-regs.h"
-#include "id.h"
 
-static struct ab8500_platform_data ab8500_platdata = {
-	.regulator	= &ab8500_regulator_plat_data,
-};
+static int __init ux500_l2x0_unlock(void)
+{
+	int i;
+	struct device_node *np;
+	void __iomem *l2x0_base;
 
-static struct prcmu_pdata db8500_prcmu_pdata = {
-	.ab_platdata	= &ab8500_platdata,
-	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
-	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
-};
+	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+	l2x0_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!l2x0_base)
+		return -ENODEV;
+
+	/*
+	 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+	 * apparently locks both caches before jumping to the kernel. The
+	 * l2x0 core will not touch the unlock registers if the l2x0 is
+	 * already enabled, so we do it right here instead. The PL310 has
+	 * 8 sets of registers, one per possible CPU.
+	 */
+	for (i = 0; i < 8; i++) {
+		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+	}
+	iounmap(l2x0_base);
+	return 0;
+}
+
+static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+	/*
+	 * We can't write to secure registers as we are in non-secure
+	 * mode, until we have some SMI service available.
+	 */
+}
 
-static void __init u8500_map_io(void)
+/*
+ * FIXME: Should we set up the GPIO domain here?
+ *
+ * The problem is that we cannot put the interrupt resources into the platform
+ * device until the irqdomain has been added. Right now, we set the GIC interrupt
+ * domain from init_irq(), then load the gpio driver from
+ * core_initcall(nmk_gpio_init) and add the platform devices from
+ * arch_initcall(customize_machine).
+ *
+ * This feels fragile because it depends on the gpio device getting probed
+ * _before_ any device uses the gpio interrupts.
+*/
+static void __init ux500_init_irq(void)
+{
+	struct device_node *np;
+	struct resource r;
+
+	irqchip_init();
+	np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
+	of_address_to_resource(np, 0, &r);
+	of_node_put(np);
+	if (!r.start) {
+		pr_err("could not find PRCMU base resource\n");
+		return;
+	}
+	prcmu_early_init(r.start, r.end-r.start);
+	ux500_pm_init(r.start, r.end-r.start);
+
+	/* Unlock before init */
+	ux500_l2x0_unlock();
+	outer_cache.write_sec = ux500_l2c310_write_sec;
+}
+
+static void ux500_restart(enum reboot_mode mode, const char *cmd)
 {
-	debug_ll_io_init();
-	ux500_setup_id();
+	local_irq_disable();
+	local_fiq_disable();
+
+	prcmu_system_reset(0);
 }
 
 /*
@@ -73,29 +139,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = {
 	.handle_irq		= db8500_pmu_handler,
 };
 
-static const char *db8500_read_soc_id(void)
-{
-	void __iomem *uid;
-
-	uid = ioremap(U8500_BB_UID_BASE, 0x20);
-	if (!uid)
-		return NULL;
-	/* Throw these device-specific numbers into the entropy pool */
-	add_device_randomness(uid, 0x14);
-	return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
-			 readl((u32 *)uid+0),
-			 readl((u32 *)uid+1), readl((u32 *)uid+2),
-			 readl((u32 *)uid+3), readl((u32 *)uid+4));
-	iounmap(uid);
-}
-
-static struct device * __init db8500_soc_device_init(void)
-{
-	const char *soc_id = db8500_read_soc_id();
-
-	return ux500_soc_device_init(soc_id);
-}
-
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
@@ -109,8 +152,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
 		       "ux500-msp-i2s.3", &msp3_platform_data),
 	/* Requires non-DT:able platform data. */
-	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
-			&db8500_prcmu_pdata),
+	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
 	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
@@ -119,8 +161,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 };
 
 static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
-			&db8500_prcmu_pdata),
+	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
 	{},
 };
 
@@ -134,15 +175,13 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
 
 static void __init u8500_init_machine(void)
 {
-	struct device *parent = db8500_soc_device_init();
-
 	/* automatically probe child nodes of dbx5x0 devices */
 	if (of_machine_is_compatible("st-ericsson,u8540"))
 		of_platform_populate(NULL, u8500_local_bus_nodes,
-				     u8540_auxdata_lookup, parent);
+				     u8540_auxdata_lookup, NULL);
 	else
 		of_platform_populate(NULL, u8500_local_bus_nodes,
-				     u8500_auxdata_lookup, parent);
+				     u8500_auxdata_lookup, NULL);
 }
 
 static const char * stericsson_dt_platform_compat[] = {
@@ -154,13 +193,10 @@ static const char * stericsson_dt_platform_compat[] = {
 };
 
 DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
-	.smp            = smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
+	.l2c_aux_val    = 0,
+	.l2c_aux_mask	= ~0,
 	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
 	.init_machine	= u8500_init_machine,
-	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
 	.restart        = ux500_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
deleted file mode 100644
index e31d3d61c..000000000
--- a/arch/arm/mach-ux500/cpu.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mfd/dbx500-prcmu.h>
-#include <linux/clksrc-dbx500-prcmu.h>
-#include <linux/sys_soc.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/irq.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-ux500.h>
-#include <linux/platform_data/arm-ux500-pm.h>
-
-#include <asm/mach/map.h>
-
-#include "setup.h"
-
-#include "board-mop500.h"
-#include "db8500-regs.h"
-#include "id.h"
-
-void ux500_restart(enum reboot_mode mode, const char *cmd)
-{
-	local_irq_disable();
-	local_fiq_disable();
-
-	prcmu_system_reset(0);
-}
-
-/*
- * FIXME: Should we set up the GPIO domain here?
- *
- * The problem is that we cannot put the interrupt resources into the platform
- * device until the irqdomain has been added. Right now, we set the GIC interrupt
- * domain from init_irq(), then load the gpio driver from
- * core_initcall(nmk_gpio_init) and add the platform devices from
- * arch_initcall(customize_machine).
- *
- * This feels fragile because it depends on the gpio device getting probed
- * _before_ any device uses the gpio interrupts.
-*/
-void __init ux500_init_irq(void)
-{
-	struct device_node *np;
-	struct resource r;
-
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND);
-	irqchip_init();
-	np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
-	of_address_to_resource(np, 0, &r);
-	of_node_put(np);
-	if (!r.start) {
-		pr_err("could not find PRCMU base resource\n");
-		return;
-	}
-	prcmu_early_init(r.start, r.end-r.start);
-	ux500_pm_init(r.start, r.end-r.start);
-
-	/*
-	 * Init clocks here so that they are available for system timer
-	 * initialization.
-	 */
-	if (cpu_is_u8500_family()) {
-		u8500_of_clk_init(U8500_CLKRST1_BASE,
-				  U8500_CLKRST2_BASE,
-				  U8500_CLKRST3_BASE,
-				  U8500_CLKRST5_BASE,
-				  U8500_CLKRST6_BASE);
-	} else if (cpu_is_u9540()) {
-		u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
-			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
-			       U8500_CLKRST6_BASE);
-	} else if (cpu_is_u8540()) {
-		u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
-			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
-			       U8500_CLKRST6_BASE);
-	}
-}
-
-static const char * __init ux500_get_machine(void)
-{
-	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
-}
-
-static const char * __init ux500_get_family(void)
-{
-	return kasprintf(GFP_KERNEL, "ux500");
-}
-
-static const char * __init ux500_get_revision(void)
-{
-	unsigned int rev = dbx500_revision();
-
-	if (rev == 0x01)
-		return kasprintf(GFP_KERNEL, "%s", "ED");
-	else if (rev >= 0xA0)
-		return kasprintf(GFP_KERNEL, "%d.%d",
-				 (rev >> 4) - 0xA + 1, rev & 0xf);
-
-	return kasprintf(GFP_KERNEL, "%s", "Unknown");
-}
-
-static ssize_t ux500_get_process(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	if (dbx500_id.process == 0x00)
-		return sprintf(buf, "Standard\n");
-
-	return sprintf(buf, "%02xnm\n", dbx500_id.process);
-}
-
-static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
-				     const char *soc_id)
-{
-	soc_dev_attr->soc_id   = soc_id;
-	soc_dev_attr->machine  = ux500_get_machine();
-	soc_dev_attr->family   = ux500_get_family();
-	soc_dev_attr->revision = ux500_get_revision();
-}
-
-static const struct device_attribute ux500_soc_attr =
-	__ATTR(process,  S_IRUGO, ux500_get_process,  NULL);
-
-struct device * __init ux500_soc_device_init(const char *soc_id)
-{
-	struct device *parent;
-	struct soc_device *soc_dev;
-	struct soc_device_attribute *soc_dev_attr;
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		return ERR_PTR(-ENOMEM);
-
-	soc_info_populate(soc_dev_attr, soc_id);
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-	        kfree(soc_dev_attr);
-		return NULL;
-	}
-
-	parent = soc_device_to_device(soc_dev);
-	device_create_file(parent, &ux500_soc_attr);
-
-	return parent;
-}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
deleted file mode 100644
index 9cdea0494..000000000
--- a/arch/arm/mach-ux500/headsmp.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  Copyright (c) 2009 ST-Ericsson
- *	This file is based  ARM Realview platform
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-/*
- * U8500 specific entry point for secondary CPUs.
- */
-ENTRY(u8500_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-ENDPROC(u8500_secondary_startup)
-
-	.align 2
-1:	.long	.
-	.long	pen_release
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index 2bc00b085..1cbed0331 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -21,7 +21,7 @@
  *
  * Called with IRQs disabled
  */
-void __ref ux500_cpu_die(unsigned int cpu)
+void ux500_cpu_die(unsigned int cpu)
 {
 	/* directly enter low power state, skipping secure registers */
 	for (;;) {
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
deleted file mode 100644
index 1e81e9900..000000000
--- a/arch/arm/mach-ux500/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/mach/map.h>
-
-#include "setup.h"
-
-#include "db8500-regs.h"
-#include "id.h"
-
-struct dbx500_asic_id dbx500_id;
-
-static unsigned int __init ux500_read_asicid(phys_addr_t addr)
-{
-	phys_addr_t base = addr & ~0xfff;
-	struct map_desc desc = {
-		.virtual	= (unsigned long)UX500_VIRT_ROM,
-		.pfn		= __phys_to_pfn(base),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	};
-
-	iotable_init(&desc, 1);
-
-	/* As in devicemaps_init() */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	return readl(UX500_VIRT_ROM + (addr & 0xfff));
-}
-
-static void ux500_print_soc_info(unsigned int asicid)
-{
-	unsigned int rev = dbx500_revision();
-
-	pr_info("DB%4x ", dbx500_partnumber());
-
-	if (rev == 0x01)
-		pr_cont("Early Drop");
-	else if (rev >= 0xA0)
-		pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf);
-	else
-		pr_cont("Unknown");
-
-	pr_cont(" [%#010x]\n", asicid);
-}
-
-static unsigned int partnumber(unsigned int asicid)
-{
-	return (asicid >> 8) & 0xffff;
-}
-
-/*
- * SOC		MIDR		ASICID ADDRESS		ASICID VALUE
- * DB8500ed	0x410fc090	0x9001FFF4		0x00850001
- * DB8500v1	0x411fc091	0x9001FFF4		0x008500A0
- * DB8500v1.1	0x411fc091	0x9001FFF4		0x008500A1
- * DB8500v2	0x412fc091	0x9001DBF4		0x008500B0
- * DB8520v2.2	0x412fc091	0x9001DBF4		0x008500B2
- * DB5500v1	0x412fc091	0x9001FFF4		0x005500A0
- * DB9540	0x413fc090	0xFFFFDBF4		0x009540xx
- */
-
-void __init ux500_setup_id(void)
-{
-	unsigned int cpuid = read_cpuid_id();
-	unsigned int asicid = 0;
-	phys_addr_t addr = 0;
-
-	switch (cpuid) {
-	case 0x410fc090: /* DB8500ed */
-	case 0x411fc091: /* DB8500v1 */
-		addr = 0x9001FFF4;
-		break;
-
-	case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */
-		asicid = ux500_read_asicid(0x9001DBF4);
-		if (partnumber(asicid) == 0x8500 ||
-		    partnumber(asicid) == 0x8520)
-			/* DB8500v2 */
-			break;
-
-		/* DB5500v1 */
-		addr = 0x9001FFF4;
-		break;
-
-	case 0x413fc090: /* DB9540 */
-		addr = 0xFFFFDBF4;
-		break;
-	}
-
-	if (addr)
-		asicid = ux500_read_asicid(addr);
-
-	if (!asicid) {
-		pr_err("Unable to identify SoC\n");
-		ux500_unknown_soc();
-	}
-
-	dbx500_id.process = asicid >> 24;
-	dbx500_id.partnumber = partnumber(asicid);
-	dbx500_id.revision = asicid & 0xff;
-
-	ux500_print_soc_info(asicid);
-}
diff --git a/arch/arm/mach-ux500/id.h b/arch/arm/mach-ux500/id.h
deleted file mode 100644
index bcc58a8cc..000000000
--- a/arch/arm/mach-ux500/id.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_UX500_ID
-#define __MACH_UX500_ID
-
-/**
- * struct dbx500_asic_id - fields of the ASIC ID
- * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
- * @partnumber: hithereto 0x8500 for DB8500
- * @revision: version code in the series
- */
-struct dbx500_asic_id {
-	u16	partnumber;
-	u8	revision;
-	u8	process;
-};
-
-extern struct dbx500_asic_id dbx500_id;
-
-static inline unsigned int __attribute_const__ dbx500_partnumber(void)
-{
-	return dbx500_id.partnumber;
-}
-
-static inline unsigned int __attribute_const__ dbx500_revision(void)
-{
-	return dbx500_id.revision;
-}
-
-/*
- * SOCs
- */
-
-static inline bool __attribute_const__ cpu_is_u8500(void)
-{
-	return dbx500_partnumber() == 0x8500;
-}
-
-static inline bool __attribute_const__ cpu_is_u8520(void)
-{
-	return dbx500_partnumber() == 0x8520;
-}
-
-static inline bool cpu_is_u8500_family(void)
-{
-	return cpu_is_u8500() || cpu_is_u8520();
-}
-
-static inline bool __attribute_const__ cpu_is_u9540(void)
-{
-	return dbx500_partnumber() == 0x9540;
-}
-
-static inline bool __attribute_const__ cpu_is_u8540(void)
-{
-	return dbx500_partnumber() == 0x8540;
-}
-
-static inline bool __attribute_const__ cpu_is_u8580(void)
-{
-	return dbx500_partnumber() == 0x8580;
-}
-
-static inline bool cpu_is_ux540_family(void)
-{
-	return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580();
-}
-
-/*
- * 8500 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u8500ed(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0x00;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v1(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v10(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v11(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0xA1;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v2(void)
-{
-	return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
-}
-
-static inline bool cpu_is_u8500v20(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() == 0xB0);
-}
-
-static inline bool cpu_is_u8500v21(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() == 0xB1);
-}
-
-static inline bool cpu_is_u8500v22(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() == 0xB2);
-}
-
-static inline bool cpu_is_u8500v20_or_later(void)
-{
-	return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
-}
-
-/*
- * 8540 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u8540v10(void)
-{
-	return cpu_is_u8540() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8580v10(void)
-{
-	return cpu_is_u8580() && dbx500_revision() == 0xA0;
-}
-
-static inline bool ux500_is_svp(void)
-{
-	return false;
-}
-
-#define ux500_unknown_soc()	BUG()
-
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 62b1de922..8f2f615ff 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -26,137 +26,82 @@
 #include "setup.h"
 
 #include "db8500-regs.h"
-#include "id.h"
 
-static void __iomem *scu_base;
-static void __iomem *backupram;
-
-/* This is called from headsmp.S to wakeup the secondary core */
-extern void u8500_secondary_startup(void);
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not.  This is necessary for the hotplug code to work reliably.
- */
-static void write_pen_release(int val)
-{
-	pen_release = val;
-	smp_wmb();
-	sync_cache_w(&pen_release);
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static void ux500_secondary_init(unsigned int cpu)
-{
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(-1);
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
+/* Magic triggers in backup RAM */
+#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
+#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
 
-static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static void wakeup_secondary(void)
 {
-	unsigned long timeout;
-
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * The secondary processor is waiting to be released from
-	 * the holding pen - release it, then wait for it to flag
-	 * that it has been released by resetting pen_release.
-	 */
-	write_pen_release(cpu_logical_map(cpu));
-
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+	struct device_node *np;
+	static void __iomem *backupram;
 
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		if (pen_release == -1)
-			break;
+	np = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram");
+	if (!np) {
+		pr_err("No backupram base address\n");
+		return;
+	}
+	backupram = of_iomap(np, 0);
+	of_node_put(np);
+	if (!backupram) {
+		pr_err("No backupram remap\n");
+		return;
 	}
 
 	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
-
-static void __init wakeup_secondary(void)
-{
-	/*
 	 * write the address of secondary startup into the backup ram register
 	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
 	 * backup ram register at offset 0x1FF0, which is what boot rom code
-	 * is waiting for. This would wake up the secondary core from WFE
+	 * is waiting for. This will wake up the secondary core from WFE.
 	 */
-#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
-	__raw_writel(virt_to_phys(u8500_secondary_startup),
-		     backupram + UX500_CPU1_JUMPADDR_OFFSET);
-
-#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
-	__raw_writel(0xA1FEED01,
-		     backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
+	writel(virt_to_phys(secondary_startup),
+	       backupram + UX500_CPU1_JUMPADDR_OFFSET);
+	writel(0xA1FEED01,
+	       backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
 
 	/* make sure write buffer is drained */
 	mb();
+	iounmap(backupram);
 }
 
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init ux500_smp_init_cpus(void)
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int i, ncores;
 	struct device_node *np;
+	static void __iomem *scu_base;
+	unsigned int ncores;
+	int i;
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	if (!np) {
+		pr_err("No SCU base address\n");
+		return;
+	}
 	scu_base = of_iomap(np, 0);
 	of_node_put(np);
-	if (!scu_base)
+	if (!scu_base) {
+		pr_err("No SCU remap\n");
 		return;
-	backupram = ioremap(U8500_BACKUPRAM0_BASE, SZ_8K);
-	ncores = scu_get_core_count(scu_base);
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
 	}
 
+	scu_enable(scu_base);
+	ncores = scu_get_core_count(scu_base);
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
+	iounmap(scu_base);
 }
 
-static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
+static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	scu_enable(scu_base);
 	wakeup_secondary();
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+	return 0;
 }
 
-struct smp_operations ux500_smp_ops __initdata = {
-	.smp_init_cpus		= ux500_smp_init_cpus,
+static const struct smp_operations ux500_smp_ops __initconst = {
 	.smp_prepare_cpus	= ux500_smp_prepare_cpus,
-	.smp_secondary_init	= ux500_secondary_init,
 	.smp_boot_secondary	= ux500_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= ux500_cpu_die,
 #endif
 };
+CPU_METHOD_OF_DECLARE(ux500_smp, "ste,dbx500-smp", &ux500_smp_ops);
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index 1fb6ad278..988e7c770 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -11,22 +11,6 @@
 #ifndef __ASM_ARCH_SETUP_H
 #define __ASM_ARCH_SETUP_H
 
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <linux/init.h>
-#include <linux/mfd/abx500/ab8500.h>
-
-void ux500_restart(enum reboot_mode mode, const char *cmd);
-
-void __init ux500_setup_id(void);
-
-extern void __init ux500_init_irq(void);
-
-extern struct device *ux500_soc_device_init(const char *soc_id);
-
-extern void ux500_timer_init(void);
-
-extern struct smp_operations ux500_smp_ops;
 extern void ux500_cpu_die(unsigned int cpu);
 
 #endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
deleted file mode 100644
index ff28d8ad1..000000000
--- a/arch/arm/mach-ux500/timer.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License Terms: GNU General Public License v2
- * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
- */
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/clksrc-dbx500-prcmu.h>
-#include <linux/clocksource.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "setup.h"
-
-#include "db8500-regs.h"
-#include "id.h"
-
-static const struct of_device_id prcmu_timer_of_match[] __initconst = {
-	{ .compatible = "stericsson,db8500-prcmu-timer-4", },
-	{ },
-};
-
-void __init ux500_timer_init(void)
-{
-	void __iomem *prcmu_timer_base;
-	void __iomem *tmp_base;
-	struct device_node *np;
-
-	if (cpu_is_u8500_family() || cpu_is_ux540_family())
-		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
-	else
-		ux500_unknown_soc();
-
-	np = of_find_matching_node(NULL, prcmu_timer_of_match);
-	if (!np)
-		goto dt_fail;
-
-	tmp_base = of_iomap(np, 0);
-	if (!tmp_base)
-		goto dt_fail;
-
-	prcmu_timer_base = tmp_base;
-
-dt_fail:
-	clksrc_dbx500_prcmu_init(prcmu_timer_base);
-	clocksource_of_init();
-}
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index 1dba36882..b0cc26284 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -1,33 +1,19 @@
-menu "Versatile platform type"
-	depends on ARCH_VERSATILE
-
-config ARCH_VERSATILE_PB
-	bool "Support Versatile Platform Baseboard for ARM926EJ-S"
-	default y
+config ARCH_VERSATILE
+	bool "ARM Ltd. Versatile family"
+	depends on ARCH_MULTI_V5
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select ARM_VIC
+	select CLKSRC_VERSATILE
+	select COMMON_CLK_VERSATILE
 	select CPU_ARM926T
+	select ICST
+	select MFD_SYSCON
 	select MIGHT_HAVE_PCI
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select VERSATILE_FPGA_IRQ
 	help
-	  Include support for the ARM(R) Versatile Platform Baseboard
-	  for the ARM926EJ-S.
-
-config MACH_VERSATILE_AB
-	bool "Support Versatile Application Baseboard for ARM926EJ-S"
-	select CPU_ARM926T
-	help
-	  Include support for the ARM(R) Versatile Application Baseboard
-	  for the ARM926EJ-S.
-
-config MACH_VERSATILE_DT
-	bool "Support Versatile platform from device tree"
-	select CPU_ARM926T
-	select USE_OF
-	help
-	  Include support for the ARM(R) Versatile/PB platform,
-	  using the device tree for discovery
-
-config MACH_VERSATILE_AUTO
-	def_bool y
-	depends on !ARCH_VERSATILE_PB && !MACH_VERSATILE_AB
-	select MACH_VERSATILE_DT
+	  This enables support for ARM Ltd Versatile board.
 
-endmenu
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index 81fa3fe25..41b124b51 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -2,8 +2,4 @@
 # Makefile for the linux kernel.
 #
 
-obj-y					:= core.o
-obj-$(CONFIG_ARCH_VERSATILE_PB)		+= versatile_pb.o
-obj-$(CONFIG_MACH_VERSATILE_AB)		+= versatile_ab.o
-obj-$(CONFIG_MACH_VERSATILE_DT)		+= versatile_dt.o
-obj-$(CONFIG_PCI)			+= pci.o
+obj-y					:= versatile_dt.o
diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot
deleted file mode 100644
index ff0a4b5b0..000000000
--- a/arch/arm/mach-versatile/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
deleted file mode 100644
index 23a04fe5d..000000000
--- a/arch/arm/mach-versatile/core.c
+++ /dev/null
@@ -1,808 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/irqchip/versatile-fpga.h>
-#include <linux/gfp.h>
-#include <linux/clkdev.h>
-#include <linux/mtd/physmap.h>
-#include <linux/bitops.h>
-#include <linux/reboot.h>
-
-#include <clocksource/timer-sp804.h>
-
-#include <asm/irq.h>
-#include <asm/hardware/icst.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-/*
- * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
- * is the (PA >> 12).
- *
- * Setup a VA for the Versatile Vectored Interrupt Controller.
- */
-#define VA_VIC_BASE		__io_address(VERSATILE_VIC_BASE)
-#define VA_SIC_BASE		__io_address(VERSATILE_SIC_BASE)
-
-/* These PIC IRQs are valid in each configuration */
-#define PIC_VALID_ALL	BIT(SIC_INT_KMI0) | BIT(SIC_INT_KMI1) | \
-			BIT(SIC_INT_SCI3) | BIT(SIC_INT_UART3) | \
-			BIT(SIC_INT_CLCD) | BIT(SIC_INT_TOUCH) | \
-			BIT(SIC_INT_KEYPAD) | BIT(SIC_INT_DoC) | \
-			BIT(SIC_INT_USB) | BIT(SIC_INT_PCI0) | \
-			BIT(SIC_INT_PCI1) | BIT(SIC_INT_PCI2) | \
-			BIT(SIC_INT_PCI3)
-#if 1
-#define IRQ_MMCI0A	IRQ_VICSOURCE22
-#define IRQ_AACI	IRQ_VICSOURCE24
-#define IRQ_ETH		IRQ_VICSOURCE25
-#define PIC_MASK	0xFFD00000
-#define PIC_VALID	PIC_VALID_ALL
-#else
-#define IRQ_MMCI0A	IRQ_SIC_MMCI0A
-#define IRQ_AACI	IRQ_SIC_AACI
-#define IRQ_ETH		IRQ_SIC_ETH
-#define PIC_MASK	0
-#define PIC_VALID	PIC_VALID_ALL | BIT(SIC_INT_MMCI0A) | \
-			BIT(SIC_INT_MMCI1A) | BIT(SIC_INT_AACI) | \
-			BIT(SIC_INT_ETH)
-#endif
-
-/* Lookup table for finding a DT node that represents the vic instance */
-static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-vic", },
-	{}
-};
-
-static const struct of_device_id sic_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-sic", },
-	{}
-};
-
-void __init versatile_init_irq(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node_by_address(NULL, vic_of_match,
-					      VERSATILE_VIC_BASE);
-	__vic_init(VA_VIC_BASE, 0, IRQ_VIC_START, ~0, 0, np);
-
-	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
-
-	np = of_find_matching_node_by_address(NULL, sic_of_match,
-					      VERSATILE_SIC_BASE);
-
-	fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START,
-		IRQ_VICSOURCE31, PIC_VALID, np);
-
-	/*
-	 * Interrupts on secondary controller from 0 to 8 are routed to
-	 * source 31 on PIC.
-	 * Interrupts from 21 to 31 are routed directly to the VIC on
-	 * the corresponding number on primary controller. This is controlled
-	 * by setting PIC_ENABLEx.
-	 */
-	writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
-}
-
-static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
-	{
-		.virtual	=  IO_ADDRESS(VERSATILE_SYS_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_SIC_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_VIC_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_VIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_SCTL_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SCTL_BASE),
-		.length		= SZ_4K * 9,
-		.type		= MT_DEVICE
-	},
-#ifdef CONFIG_MACH_VERSATILE_AB
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_IB2_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_IB2_BASE),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-#endif
-#ifdef CONFIG_DEBUG_LL
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_UART0_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-#endif
-#ifdef CONFIG_PCI
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  (unsigned long)VERSATILE_PCI_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_BASE),
-		.length		= VERSATILE_PCI_BASE_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
-		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
-		.type		= MT_DEVICE
-	},
-#endif
-};
-
-void __init versatile_map_io(void)
-{
-	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
-}
-
-
-#define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
-
-static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = __raw_readl(VERSATILE_FLASHCTRL);
-	if (on)
-		val |= VERSATILE_FLASHPROG_FLVPPEN;
-	else
-		val &= ~VERSATILE_FLASHPROG_FLVPPEN;
-	__raw_writel(val, VERSATILE_FLASHCTRL);
-}
-
-static struct physmap_flash_data versatile_flash_data = {
-	.width			= 4,
-	.set_vpp		= versatile_flash_set_vpp,
-};
-
-static struct resource versatile_flash_resource = {
-	.start			= VERSATILE_FLASH_BASE,
-	.end			= VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device versatile_flash_device = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &versatile_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &versatile_flash_resource,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start		= VERSATILE_ETH_BASE,
-		.end		= VERSATILE_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_ETH,
-		.end		= IRQ_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource versatile_i2c_resource = {
-	.start			= VERSATILE_I2C_BASE,
-	.end			= VERSATILE_I2C_BASE + SZ_4K - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device versatile_i2c_device = {
-	.name			= "versatile-i2c",
-	.id			= 0,
-	.num_resources		= 1,
-	.resource		= &versatile_i2c_resource,
-};
-
-static struct i2c_board_info versatile_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-	},
-};
-
-static int __init versatile_i2c_init(void)
-{
-	return i2c_register_board_info(0, versatile_i2c_board_info,
-				       ARRAY_SIZE(versatile_i2c_board_info));
-}
-arch_initcall(versatile_i2c_init);
-
-#define VERSATILE_SYSMCI	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
-
-unsigned int mmc_status(struct device *dev)
-{
-	struct amba_device *adev = container_of(dev, struct amba_device, dev);
-	u32 mask;
-
-	if (adev->res.start == VERSATILE_MMCI0_BASE)
-		mask = 1;
-	else
-		mask = 2;
-
-	return readl(VERSATILE_SYSMCI) & mask;
-}
-
-static struct mmci_platform_data mmc0_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = VERSATILE_CHAR_LCD_BASE,
-		.end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name           =       "arm-charlcd",
-	.id             =       -1,
-	.num_resources  =       ARRAY_SIZE(char_lcd_resources),
-	.resource       =       char_lcd_resources,
-};
-
-static struct resource leds_resources[] = {
-	{
-		.start	= VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET,
-		.end	= VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET + 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_device = {
-	.name		= "versatile-leds",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(leds_resources),
-	.resource	= leds_resources,
-};
-
-/*
- * Clock handling
- */
-static const struct icst_params versatile_oscvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST307_VCO_MAX,
-	.vco_min	= ICST307_VCO_MIN,
-	.vd_min		= 4 + 8,
-	.vd_max		= 511 + 8,
-	.rd_min		= 1 + 2,
-	.rd_max		= 127 + 2,
-	.s2div		= icst307_s2div,
-	.idx2s		= icst307_idx2s,
-};
-
-static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
-	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, sys_lock);
-	writel(val, clk->vcoreg);
-	writel(0, sys_lock);
-}
-
-static const struct clk_ops osc4_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= versatile_oscvco_set,
-};
-
-static struct clk osc4_clk = {
-	.ops	= &osc4_clk_ops,
-	.params	= &versatile_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-	.rate	= 24000000,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* AMBA bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* UART0 */
-		.dev_id		= "dev:f1",
-		.clk		= &ref24_clk,
-	}, {	/* UART1 */
-		.dev_id		= "dev:f2",
-		.clk		= &ref24_clk,
-	}, {	/* UART2 */
-		.dev_id		= "dev:f3",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 */
-		.dev_id		= "fpga:09",
-		.clk		= &ref24_clk,
-	}, {	/* KMI0 */
-		.dev_id		= "fpga:06",
-		.clk		= &ref24_clk,
-	}, {	/* KMI1 */
-		.dev_id		= "fpga:07",
-		.clk		= &ref24_clk,
-	}, {	/* MMC0 */
-		.dev_id		= "fpga:05",
-		.clk		= &ref24_clk,
-	}, {	/* MMC1 */
-		.dev_id		= "fpga:0b",
-		.clk		= &ref24_clk,
-	}, {	/* SSP */
-		.dev_id		= "dev:f4",
-		.clk		= &ref24_clk,
-	}, {	/* CLCD */
-		.dev_id		= "dev:20",
-		.clk		= &osc4_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
-/*
- * CLCD support.
- */
-#define SYS_CLCD_MODE_MASK	(3 << 0)
-#define SYS_CLCD_MODE_888	(0 << 0)
-#define SYS_CLCD_MODE_5551	(1 << 0)
-#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
-#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
-#define SYS_CLCD_NLCDIOON	(1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
-#define SYS_CLCD_ID_MASK	(0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
-#define SYS_CLCD_ID_VGA		(0x1f << 8)
-
-static bool is_sanyo_2_5_lcd;
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void versatile_clcd_disable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
-	 */
-	if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
-		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl &= ~0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-#endif
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void versatile_clcd_enable(struct clcd_fb *fb)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_MODE_MASK;
-
-	switch (var->green.length) {
-	case 5:
-		val |= SYS_CLCD_MODE_5551;
-		break;
-	case 6:
-		if (var->red.offset == 0)
-			val |= SYS_CLCD_MODE_565_RLSB;
-		else
-			val |= SYS_CLCD_MODE_565_BLSB;
-		break;
-	case 8:
-		val |= SYS_CLCD_MODE_888;
-		break;
-	}
-
-	/*
-	 * Set the MUX
-	 */
-	writel(val, sys_clcd);
-
-	/*
-	 * And now enable the PSUs
-	 */
-	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
-	 */
-	if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
-		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl |= 0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-#endif
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int versatile_clcd_setup(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	const char *panel_name;
-	u32 val;
-
-	is_sanyo_2_5_lcd = false;
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel_name = "Sanyo TM38QV67A02A";
-	else if (val == SYS_CLCD_ID_SANYO_2_5) {
-		panel_name = "Sanyo QVGA Portrait";
-		is_sanyo_2_5_lcd = true;
-	} else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel_name = "Epson L2F50113T00";
-	else if (val == SYS_CLCD_ID_VGA)
-		panel_name = "VGA";
-	else {
-		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
-			val);
-		panel_name = "VGA";
-	}
-
-	fb->panel = versatile_clcd_get_panel(panel_name);
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
-	clcdfb_decode(fb, regs);
-
-	/* Always clear BGR for RGB565: we do the routing externally */
-	if (fb->fb.var.green.length == 6)
-		regs->cntl &= ~CNTL_BGR;
-}
-
-static struct clcd_board clcd_plat_data = {
-	.name		= "Versatile",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= versatile_clcd_decode,
-	.disable	= versatile_clcd_disable,
-	.enable		= versatile_clcd_enable,
-	.setup		= versatile_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-	.irq_base	= IRQ_GPIO0_START,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= IRQ_GPIO1_START,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-	.irq_base	= IRQ_GPIO2_START,
-};
-
-static struct pl061_platform_data gpio3_plat_data = {
-	.gpio_base	= 24,
-	.irq_base	= IRQ_GPIO3_START,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-#define AACI_IRQ	{ IRQ_AACI }
-#define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ	{ IRQ_SIC_KMI0 }
-#define KMI1_IRQ	{ IRQ_SIC_KMI1 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define SMC_IRQ		{ }
-#define MPMC_IRQ	{ }
-#define CLCD_IRQ	{ IRQ_CLCDINT }
-#define DMAC_IRQ	{ IRQ_DMAINT }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ }
-#define WATCHDOG_IRQ	{ IRQ_WDOGINT }
-#define GPIO0_IRQ	{ IRQ_GPIOINT0 }
-#define GPIO1_IRQ	{ IRQ_GPIOINT1 }
-#define GPIO2_IRQ	{ IRQ_GPIOINT2 }
-#define GPIO3_IRQ	{ IRQ_GPIOINT3 }
-#define RTC_IRQ		{ IRQ_RTCINT }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_SCIINT }
-#define UART0_IRQ	{ IRQ_UARTINT0 }
-#define UART1_IRQ	{ IRQ_UARTINT1 }
-#define UART2_IRQ	{ IRQ_UARTINT2 }
-#define SSP_IRQ		{ IRQ_SSPINT }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-APB_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
-APB_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-APB_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,   "dev:00",  SMC,      NULL);
-AHB_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
-AHB_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
-AHB_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-APB_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-APB_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-APB_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
-APB_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-APB_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-APB_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
-APB_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
-APB_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-APB_DEVICE(uart0, "dev:f1",  UART0,    NULL);
-APB_DEVICE(uart1, "dev:f2",  UART1,    NULL);
-APB_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-APB_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&smc_device,
-	&mpmc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&gpio3_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-#ifdef CONFIG_OF
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate().  Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL),
-	/* FIXME: this is buggy, the platform data is needed for this MMC instance too */
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL),
-
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", &ssp0_plat_data),
-
-#if 0
-	/*
-	 * These entries are unnecessary because no clocks referencing
-	 * them.  I've left them in for now as place holders in case
-	 * any of them need to be added back, but they should be
-	 * removed before actually committing this patch.  --gcl
-	 */
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL),
-
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL),
-#endif
-	{}
-};
-#endif
-
-void versatile_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-	u32 val;
-
-	val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
-	val |= 0x105;
-
-	__raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
-	__raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
-	__raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
-}
-
-/* Early initializations */
-void __init versatile_init_early(void)
-{
-	u32 val;
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-
-	osc4_clk.vcoreg	= sys + VERSATILE_SYS_OSCCLCD_OFFSET;
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
-
-	/*
-	 * set clock frequency:
-	 *	VERSATILE_REFCLK is 32KHz
-	 *	VERSATILE_TIMCLK is 1MHz
-	 */
-	val = readl(__io_address(VERSATILE_SCTL_BASE));
-	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
-	       __io_address(VERSATILE_SCTL_BASE));
-}
-
-void __init versatile_init(void)
-{
-	int i;
-
-	platform_device_register(&versatile_flash_device);
-	platform_device_register(&versatile_i2c_device);
-	platform_device_register(&smc91x_device);
-	platform_device_register(&char_lcd_device);
-	platform_device_register(&leds_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE		 __io_address(VERSATILE_TIMER0_1_BASE)
-#define TIMER1_VA_BASE		(__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
-#define TIMER2_VA_BASE		 __io_address(VERSATILE_TIMER2_3_BASE)
-#define TIMER3_VA_BASE		(__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init versatile_timer_init(void)
-{
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	sp804_timer_disable(TIMER0_VA_BASE);
-	sp804_timer_disable(TIMER1_VA_BASE);
-	sp804_timer_disable(TIMER2_VA_BASE);
-	sp804_timer_disable(TIMER3_VA_BASE);
-
-	sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
-	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
-}
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
deleted file mode 100644
index f06d5768e..000000000
--- a/arch/arm/mach-versatile/core.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.h
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VERSATILE_H
-#define __ASM_ARCH_VERSATILE_H
-
-#include <linux/amba/bus.h>
-#include <linux/of_platform.h>
-#include <linux/reboot.h>
-
-extern void __init versatile_init(void);
-extern void __init versatile_init_early(void);
-extern void __init versatile_init_irq(void);
-extern void __init versatile_map_io(void);
-extern void versatile_timer_init(void);
-extern void versatile_restart(enum reboot_mode, const char *);
-extern unsigned int mmc_status(struct device *dev);
-#ifdef CONFIG_OF
-extern struct of_dev_auxdata versatile_auxdata_lookup[];
-#endif
-
-#define APB_DEVICE(name, busid, base, plat)	\
-static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
-
-#define AHB_DEVICE(name, busid, base, plat)	\
-static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h
deleted file mode 100644
index e58d0771b..000000000
--- a/arch/arm/mach-versatile/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
deleted file mode 100644
index 3e5d425e2..000000000
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Versatile boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * PCI space virtual addresses
- */
-#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
-#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
-
-/* macro to get at MMIO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-
-#define __io_address(n)		((void __iomem __force *)IO_ADDRESS(n))
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
deleted file mode 100644
index 0fd771ca6..000000000
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/platform.h>
-
-/* 
- *  IRQ interrupts definitions are the same as the INT definitions
- *  held within platform.h
- */
-#define IRQ_VIC_START		32
-#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
-#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
-#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
-#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
-#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
-#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
-#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
-#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
-#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
-#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
-#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
-#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
-#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
-#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
-#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
-#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
-#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
-#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
-#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
-#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
-#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
-#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
-#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
-#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
-#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
-#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
-#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
-#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
-#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
-#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
-#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
-#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
-#define IRQ_VIC_END		(IRQ_VIC_START + 31)
-
-/* 
- *  FIQ interrupts definitions are the same as the INT definitions.
- */
-#define FIQ_WDOGINT		INT_WDOGINT
-#define FIQ_SOFTINT		INT_SOFTINT
-#define FIQ_COMMRx		INT_COMMRx
-#define FIQ_COMMTx		INT_COMMTx
-#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
-#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
-#define FIQ_GPIOINT0		INT_GPIOINT0
-#define FIQ_GPIOINT1		INT_GPIOINT1
-#define FIQ_GPIOINT2		INT_GPIOINT2
-#define FIQ_GPIOINT3		INT_GPIOINT3
-#define FIQ_RTCINT		INT_RTCINT
-#define FIQ_SSPINT		INT_SSPINT
-#define FIQ_UARTINT0		INT_UARTINT0
-#define FIQ_UARTINT1		INT_UARTINT1
-#define FIQ_UARTINT2		INT_UARTINT2
-#define FIQ_SCIINT		INT_SCIINT
-#define FIQ_CLCDINT		INT_CLCDINT
-#define FIQ_DMAINT		INT_DMAINT
-#define FIQ_PWRFAILINT 		INT_PWRFAILINT
-#define FIQ_MBXINT		INT_MBXINT
-#define FIQ_GNDINT		INT_GNDINT
-#define FIQ_VICSOURCE21		INT_VICSOURCE21
-#define FIQ_VICSOURCE22		INT_VICSOURCE22
-#define FIQ_VICSOURCE23		INT_VICSOURCE23
-#define FIQ_VICSOURCE24		INT_VICSOURCE24
-#define FIQ_VICSOURCE25		INT_VICSOURCE25
-#define FIQ_VICSOURCE26		INT_VICSOURCE26
-#define FIQ_VICSOURCE27		INT_VICSOURCE27
-#define FIQ_VICSOURCE28		INT_VICSOURCE28
-#define FIQ_VICSOURCE29		INT_VICSOURCE29
-#define FIQ_VICSOURCE30		INT_VICSOURCE30
-#define FIQ_VICSOURCE31		INT_VICSOURCE31
-
-
-/*
- * Secondary interrupt controller
- */
-#define IRQ_SIC_START		64
-#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
-#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
-#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
-#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
-#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
-#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
-#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
-#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
-#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
-#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
-#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
-#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
-#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
-#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
-#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
-#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
-#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
-#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
-#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
-#define IRQ_SIC_END		95
-
-#define IRQ_GPIO0_START		(IRQ_SIC_END + 1)
-#define IRQ_GPIO0_END		(IRQ_GPIO0_START + 31)
-#define IRQ_GPIO1_START		(IRQ_GPIO0_END + 1)
-#define IRQ_GPIO1_END		(IRQ_GPIO1_START + 31)
-#define IRQ_GPIO2_START		(IRQ_GPIO1_END + 1)
-#define IRQ_GPIO2_END		(IRQ_GPIO2_START + 31)
-#define IRQ_GPIO3_START		(IRQ_GPIO2_END + 1)
-#define IRQ_GPIO3_END		(IRQ_GPIO3_START + 31)
-
-#define NR_IRQS			(IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
deleted file mode 100644
index 6f938ccb0..000000000
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __address_h
-#define __address_h                     1
-
-/*
- * Memory definitions
- */
-#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define VERSATILE_BOOT_ROM_HI          0x30000000
-#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
-#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
-
-#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
-#define VERSATILE_SSRAM_SIZE           SZ_2M
-
-#define VERSATILE_FLASH_BASE           0x34000000
-#define VERSATILE_FLASH_SIZE           SZ_64M
-
-/* 
- *  SDRAM
- */
-#define VERSATILE_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define VERSATILE_SYS_ID_OFFSET               0x00
-#define VERSATILE_SYS_SW_OFFSET               0x04
-#define VERSATILE_SYS_LED_OFFSET              0x08
-#define VERSATILE_SYS_OSC0_OFFSET             0x0C
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x10
-#define VERSATILE_SYS_OSC2_OFFSET             0x14
-#define VERSATILE_SYS_OSC3_OFFSET             0x18
-#define VERSATILE_SYS_OSC4_OFFSET             0x1C
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x1C
-#endif
-
-#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
-
-#define VERSATILE_SYS_LOCK_OFFSET             0x20
-#define VERSATILE_SYS_100HZ_OFFSET            0x24
-#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
-#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
-#define VERSATILE_SYS_FLAGS_OFFSET            0x30
-#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
-#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
-#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
-#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
-#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
-#define VERSATILE_SYS_PCICTL_OFFSET           0x44
-#define VERSATILE_SYS_MCI_OFFSET              0x48
-#define VERSATILE_SYS_FLASH_OFFSET            0x4C
-#define VERSATILE_SYS_CLCD_OFFSET             0x50
-#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
-#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
-#define VERSATILE_SYS_24MHz_OFFSET            0x5C
-#define VERSATILE_SYS_MISC_OFFSET             0x60
-#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
-#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
-#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
-#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
-#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
-
-#define VERSATILE_SYS_BASE                    0x10000000
-#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
-#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
-#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
-#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
-#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
-#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
-#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
-#endif
-
-#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
-#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
-#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
-#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
-#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
-#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
-#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
-#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
-#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
-#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
-#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
-#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
-#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
-#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
-#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
-#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
-#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
-#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
-#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
-#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
-#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
-#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
-#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for VERSATILE_SYS_RESET_CTRL
- */
-#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
-#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
-#define VERSATILE_SYS_CTRL_RESET_POR          0x05
-#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
-
-#define VERSATILE_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  Versatile control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * VERSATILE_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * VERSATILE_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
-#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * VERSATILE_SYS_FLASH
- */
-#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * VERSATILE_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * VERSATILE peripheral addresses
- */
-#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
-#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
-#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
-#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
-#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
-#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
-#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
-#define VERSATILE_SCI1_BASE            0x1000A000
-#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
-	/* 0x1000C000 - 0x1000CFFF = reserved */
-#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
-#define VERSATILE_USB_BASE             0x10020000	/* USB */
-	/* 0x10030000 - 0x100FFFFF = reserved */
-#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
-#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
-#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
-#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
-#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000	/* off-chip peripherals alias from */
-                                                /* 0x10000000 - 0x100FFFFF */
-#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
-#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
-#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
-#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
-#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
-#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000	/* GPIO port 1 */
-#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
-#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
-#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
-	/* 0x101E9000 - reserved */
-#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
-#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
-#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
-#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
-#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
-
-#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
-#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
-#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
-
-/* PCI space */
-#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
-#define VERSATILE_PCI_CFG_BASE	       0x42000000
-#define VERSATILE_PCI_IO_BASE          0x43000000
-#define VERSATILE_PCI_MEM_BASE0        0x44000000
-#define VERSATILE_PCI_MEM_BASE1        0x50000000
-#define VERSATILE_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define VERSATILE_PCI_BASE_SIZE	       0x01000000
-#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
-#define VERSATILE_PCI_IO_BASE_SIZE     0x01000000
-#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define VERSATILE_DOC_BASE             0x2C000000
-#define VERSATILE_DOC_SIZE             (16 << 20)
-#define VERSATILE_DOC_PAGE_SIZE        512
-#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define VERSATILE_SYS_LED0             (1 << 0)
-#define VERSATILE_SYS_LED1             (1 << 1)
-#define VERSATILE_SYS_LED2             (1 << 2)
-#define VERSATILE_SYS_LED3             (1 << 3)
-#define VERSATILE_SYS_LED4             (1 << 4)
-#define VERSATILE_SYS_LED5             (1 << 5)
-#define VERSATILE_SYS_LED6             (1 << 6)
-#define VERSATILE_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  VERSATILE_SYS_LED
-
-/* 
- * Control registers
- */
-#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
-#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
-#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Interrupt Controller - control registers
- * ------------------------------------------------------------------------
- * 
- *  Offsets from interrupt controller base 
- * 
- *  System Controller interrupt controller base is
- * 
- * 	VERSATILE_IC_BASE
- * 
- *  Core Module interrupt controller base is
- * 
- * 	VERSATILE_SYS_IC 
- * 
- */
-/* VIC definitions in include/asm-arm/hardware/vic.h */
-
-#define SIC_IRQ_STATUS                  0
-#define SIC_IRQ_RAW_STATUS              0x04
-#define SIC_IRQ_ENABLE                  0x08
-#define SIC_IRQ_ENABLE_SET              0x08
-#define SIC_IRQ_ENABLE_CLEAR            0x0C
-#define SIC_INT_SOFT_SET                0x10
-#define SIC_INT_SOFT_CLEAR              0x14
-#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
-#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
-#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (primary)
- * ------------------------------------------------------------------------
- */
-
-#define INT_WDOGINT                     0	/* Watchdog timer */
-#define INT_SOFTINT                     1	/* Software interrupt */
-#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
-#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
-#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
-#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
-#define INT_GPIOINT0                    6	/* GPIO 0 */
-#define INT_GPIOINT1                    7	/* GPIO 1 */
-#define INT_GPIOINT2                    8	/* GPIO 2 */
-#define INT_GPIOINT3                    9	/* GPIO 3 */
-#define INT_RTCINT                      10	/* Real Time Clock */
-#define INT_SSPINT                      11	/* Synchronous Serial Port */
-#define INT_UARTINT0                    12	/* UART 0 on development chip */
-#define INT_UARTINT1                    13	/* UART 1 on development chip */
-#define INT_UARTINT2                    14	/* UART 2 on development chip */
-#define INT_SCIINT                      15	/* Smart Card Interface */
-#define INT_CLCDINT                     16	/* CLCD controller */
-#define INT_DMAINT                      17	/* DMA controller */
-#define INT_PWRFAILINT                  18	/* Power failure */
-#define INT_MBXINT                      19	/* Graphics processor */
-#define INT_GNDINT                      20	/* Reserved */
-	/* External interrupt signals from logic tiles or secondary controller */
-#define INT_VICSOURCE21                 21	/* Disk on Chip */
-#define INT_VICSOURCE22                 22	/* MCI0A */
-#define INT_VICSOURCE23                 23	/* MCI1A */
-#define INT_VICSOURCE24                 24	/* AACI */
-#define INT_VICSOURCE25                 25	/* Ethernet */
-#define INT_VICSOURCE26                 26	/* USB */
-#define INT_VICSOURCE27                 27	/* PCI 0 */
-#define INT_VICSOURCE28                 28	/* PCI 1 */
-#define INT_VICSOURCE29                 29	/* PCI 2 */
-#define INT_VICSOURCE30                 30	/* PCI 3 */
-#define INT_VICSOURCE31                 31	/* SIC source */
-
-#define VERSATILE_SC_VALID_INT               0x003FFFFF
-
-#define MAXIRQNUM                       31
-#define MAXFIQNUM                       31
-#define MAXSWINUM                       31
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (secondary)
- * ------------------------------------------------------------------------
- */
-#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
-#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
-#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
-#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
-#define SIC_INT_SCI3                    5	/* Smart Card interface */
-#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
-#define SIC_INT_CLCD                    7	/* Character LCD */
-#define SIC_INT_TOUCH                   8	/* Touchscreen */
-#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
-	/* 10:20 - reserved */
-#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
-#define SIC_INT_MMCI0A                  22	/* MMC 0A */
-#define SIC_INT_MMCI1A                  23	/* MMC 1A */
-#define SIC_INT_AACI                    24	/* Audio Codec */
-#define SIC_INT_ETH                     25	/* Ethernet controller */
-#define SIC_INT_USB                     26	/* USB controller */
-#define SIC_INT_PCI0                    27
-#define SIC_INT_PCI1                    28
-#define SIC_INT_PCI2                    29
-#define SIC_INT_PCI3                    30
-
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK	0
-#define VERSATILE_TIMCLK	1
-
-#define VERSATILE_TIMER1_EnSel	15
-#define VERSATILE_TIMER2_EnSel	17
-#define VERSATILE_TIMER3_EnSel	19
-#define VERSATILE_TIMER4_EnSel	21
-
-
-#define VERSATILE_CSR_BASE             0x10000000
-#define VERSATILE_CSR_SIZE             0x10000000
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-/*
- * IB2 Versatile/AB expansion board definitions
- */
-#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
-#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
-
-/* VICINTSOURCE27 */
-#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
-#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
-#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
-
-#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
-#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
-#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
-#endif
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
deleted file mode 100644
index 986e3d303..000000000
--- a/arch/arm/mach-versatile/include/mach/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
deleted file mode 100644
index c97be4ea7..000000000
--- a/arch/arm/mach-versatile/pci.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/pci.c
- *
- * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved.
- * You can redistribute and/or modify this software under the terms of version 2
- * of the GNU General Public License as published by the Free Software Foundation.
- * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED
- * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software.
- *
- * ARM Versatile PCI driver.
- *
- * 14/04/2005 Initial version, colin.king@philips.com
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-
-/*
- * these spaces are mapped using the following base registers:
- *
- * Usage Local Bus Memory         Base/Map registers used
- *
- * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0,  non prefetch
- * Mem   60000000 - 6FFFFFFF      LB_BASE1/LB_MAP1,  prefetch
- * IO    44000000 - 4FFFFFFF      LB_BASE2/LB_MAP2,  IO
- * Cfg   42000000 - 42FFFFFF	  PCI config
- *
- */
-#define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n))
-#define SYS_PCICTL		__IO_ADDRESS(VERSATILE_SYS_PCICTL)
-#define PCI_IMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
-#define PCI_IMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
-#define PCI_IMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
-#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
-#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
-#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x1c)
-#define PCI_SELFID		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
-
-#define DEVICE_ID_OFFSET		0x00
-#define CSR_OFFSET			0x04
-#define CLASS_ID_OFFSET			0x08
-
-#define VP_PCI_DEVICE_ID		0x030010ee
-#define VP_PCI_CLASS_ID			0x0b400000
-
-static unsigned long pci_slot_ignore = 0;
-
-static int __init versatile_pci_slot_ignore(char *str)
-{
-	int retval;
-	int slot;
-
-	while ((retval = get_option(&str,&slot))) {
-		if ((slot < 0) || (slot > 31)) {
-			printk("Illegal slot value: %d\n",slot);
-		} else {
-			pci_slot_ignore |= (1 << slot);
-		}
-	}
-	return 1;
-}
-
-__setup("pci_slot_ignore=", versatile_pci_slot_ignore);
-
-
-static void __iomem *__pci_addr(struct pci_bus *bus,
-				unsigned int devfn, int offset)
-{
-	unsigned int busnr = bus->number;
-
-	/*
-	 * Trap out illegal values
-	 */
-	if (offset > 255)
-		BUG();
-	if (busnr > 255)
-		BUG();
-	if (devfn > 255)
-		BUG();
-
-	return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) |
-		(PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset);
-}
-
-static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-				 int size, u32 *val)
-{
-	void __iomem *addr = __pci_addr(bus, devfn, where & ~3);
-	u32 v;
-	int slot = PCI_SLOT(devfn);
-
-	if (pci_slot_ignore & (1 << slot)) {
-		/* Ignore this slot */
-		switch (size) {
-		case 1:
-			v = 0xff;
-			break;
-		case 2:
-			v = 0xffff;
-			break;
-		default:
-			v = 0xffffffff;
-		}
-	} else {
-		switch (size) {
-		case 1:
-			v = __raw_readl(addr);
-			if (where & 2) v >>= 16;
-			if (where & 1) v >>= 8;
- 			v &= 0xff;
-			break;
-
-		case 2:
-			v = __raw_readl(addr);
-			if (where & 2) v >>= 16;
- 			v &= 0xffff;
-			break;
-
-		default:
-			v = __raw_readl(addr);
-			break;
-		}
-	}
-
-	*val = v;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				  int size, u32 val)
-{
-	void __iomem *addr = __pci_addr(bus, devfn, where);
-	int slot = PCI_SLOT(devfn);
-
-	if (pci_slot_ignore & (1 << slot)) {
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	switch (size) {
-	case 1:
-		__raw_writeb((u8)val, addr);
-		break;
-
-	case 2:
-		__raw_writew((u16)val, addr);
-		break;
-
-	case 4:
-		__raw_writel(val, addr);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_versatile_ops = {
-	.read	= versatile_read_config,
-	.write	= versatile_write_config,
-};
-
-static struct resource unused_mem = {
-	.name	= "PCI unused",
-	.start	= VERSATILE_PCI_MEM_BASE0,
-	.end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource non_mem = {
-	.name	= "PCI non-prefetchable",
-	.start	= VERSATILE_PCI_MEM_BASE1,
-	.end	= VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource pre_mem = {
-	.name	= "PCI prefetchable",
-	.start	= VERSATILE_PCI_MEM_BASE2,
-	.end	= VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1,
-	.flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH,
-};
-
-static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	ret = request_resource(&iomem_resource, &unused_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate unused "
-		       "memory region (%d)\n", ret);
-		goto out;
-	}
-	ret = request_resource(&iomem_resource, &non_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
-		       "memory region (%d)\n", ret);
-		goto release_unused_mem;
-	}
-	ret = request_resource(&iomem_resource, &pre_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate prefetchable "
-		       "memory region (%d)\n", ret);
-		goto release_non_mem;
-	}
-
-	/*
-	 * the mem resource for this bus
-	 * the prefetch mem resource for this bus
-	 */
-	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
-
-	goto out;
-
- release_non_mem:
-	release_resource(&non_mem);
- release_unused_mem:
-	release_resource(&unused_mem);
- out:
-	return ret;
-}
-
-int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-        int i;
-        int myslot = -1;
-	unsigned long val;
-	void __iomem *local_pci_cfg_base;
-
-	val = __raw_readl(SYS_PCICTL);
-	if (!(val & 1)) {
-		printk("Not plugged into PCI backplane!\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	ret = pci_ioremap_io(0, VERSATILE_PCI_IO_BASE);
-	if (ret)
-		goto out;
-
-	if (nr == 0) {
-		ret = pci_versatile_setup_resources(sys);
-		if (ret < 0) {
-			printk("pci_versatile_setup: resources... oops?\n");
-			goto out;
-		}
-	} else {
-		printk("pci_versatile_setup: resources... nr == 0??\n");
-		goto out;
-	}
-
-	/*
-	 *  We need to discover the PCI core first to configure itself
-	 *  before the main PCI probing is performed
-	 */
-	for (i=0; i<32; i++)
-		if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
-		    (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
-			myslot = i;
-			break;
-		}
-
-	if (myslot == -1) {
-		printk("Cannot find PCI core!\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	printk("PCI core found (slot %d)\n",myslot);
-
-	__raw_writel(myslot, PCI_SELFID);
-	local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
-
-	val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
-	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
-	__raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
-
-	/*
-	 * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
-	 */
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
-
-	/*
-	 * For many years the kernel and QEMU were symbiotically buggy
-	 * in that they both assumed the same broken IRQ mapping.
-	 * QEMU therefore attempts to auto-detect old broken kernels
-	 * so that they still work on newer QEMU as they did on old
-	 * QEMU. Since we now use the correct (ie matching-hardware)
-	 * IRQ mapping we write a definitely different value to a
-	 * PCI_INTERRUPT_LINE register to tell QEMU that we expect
-	 * real hardware behaviour and it need not be backwards
-	 * compatible for us. This write is harmless on real hardware.
-	 */
-	__raw_writel(0, VERSATILE_PCI_VIRT_BASE+PCI_INTERRUPT_LINE);
-
-	/*
-	 * Do not to map Versatile FPGA PCI device into memory space
-	 */
-	pci_slot_ignore |= (1 << myslot);
-	ret = 1;
-
- out:
-	return ret;
-}
-
-
-void __init pci_versatile_preinit(void)
-{
-	pcibios_min_mem = 0x50000000;
-
-	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
-	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
-	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
-
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
-
-	__raw_writel(1, SYS_PCICTL);
-}
-
-/*
- * map the specified device/slot/pin to an IRQ.   Different backplanes may need to modify this.
- */
-static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Slot	INTA	INTB	INTC	INTD
-	 * 31	PCI1	PCI2	PCI3	PCI0
-	 * 30	PCI0	PCI1	PCI2	PCI3
-	 * 29	PCI3	PCI0	PCI1	PCI2
-	 */
-	irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
-
-	return irq;
-}
-
-static struct hw_pci versatile_pci __initdata = {
-	.map_irq		= versatile_map_irq,
-	.nr_controllers		= 1,
-	.ops			= &pci_versatile_ops,
-	.setup			= pci_versatile_setup,
-	.preinit		= pci_versatile_preinit,
-};
-
-static int __init versatile_pci_init(void)
-{
-	pci_common_init(&versatile_pci);
-	return 0;
-}
-
-subsys_initcall(versatile_pci_init);
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
deleted file mode 100644
index 1caef1093..000000000
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/versatile_ab.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "core.h"
-
-MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.map_io		= versatile_map_io,
-	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
-	.init_time	= versatile_timer_init,
-	.init_machine	= versatile_init,
-	.restart	= versatile_restart,
-MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 7de3e92a1..3c8d39c12 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -22,17 +22,329 @@
  */
 
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
+#include <linux/amba/mmci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 
-#include "core.h"
+/* macro to get at MMIO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define __io_address(n)		((void __iomem __force *)IO_ADDRESS(n))
+
+/*
+ * ------------------------------------------------------------------------
+ *  Versatile Registers
+ * ------------------------------------------------------------------------
+ */
+#define VERSATILE_SYS_PCICTL_OFFSET           0x44
+#define VERSATILE_SYS_MCI_OFFSET              0x48
+#define VERSATILE_SYS_CLCD_OFFSET             0x50
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
+#define VERSATILE_MMCI1_BASE           0x1000B000	/* MMC Interface */
+#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
+#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
+#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
+#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK	0
+#define VERSATILE_TIMCLK	1
+
+#define VERSATILE_TIMER1_EnSel	15
+#define VERSATILE_TIMER2_EnSel	17
+#define VERSATILE_TIMER3_EnSel	19
+#define VERSATILE_TIMER4_EnSel	21
+
+static void __iomem *versatile_sys_base;
+static void __iomem *versatile_ib2_ctrl;
+
+unsigned int mmc_status(struct device *dev)
+{
+	struct amba_device *adev = container_of(dev, struct amba_device, dev);
+	u32 mask;
+
+	if (adev->res.start == VERSATILE_MMCI0_BASE)
+		mask = 1;
+	else
+		mask = 2;
+
+	return readl(versatile_sys_base + VERSATILE_SYS_MCI_OFFSET) & mask;
+}
+
+static struct mmci_platform_data mmc0_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
+};
+
+static struct mmci_platform_data mmc1_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
+};
+
+/*
+ * CLCD support.
+ */
+#define SYS_CLCD_MODE_MASK	(3 << 0)
+#define SYS_CLCD_MODE_888	(0 << 0)
+#define SYS_CLCD_MODE_5551	(1 << 0)
+#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
+#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
+#define SYS_CLCD_NLCDIOON	(1 << 2)
+#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
+#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
+#define SYS_CLCD_ID_MASK	(0x1f << 8)
+#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
+#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
+#define SYS_CLCD_ID_VGA		(0x1f << 8)
+
+static bool is_sanyo_2_5_lcd;
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void versatile_clcd_disable(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+
+	/*
+	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
+	 */
+	if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
+		unsigned long ctrl;
+
+		ctrl = readl(versatile_ib2_ctrl);
+		ctrl &= ~0x01;
+		writel(ctrl, versatile_ib2_ctrl);
+	}
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void versatile_clcd_enable(struct clcd_fb *fb)
+{
+	struct fb_var_screeninfo *var = &fb->fb.var;
+	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_MODE_MASK;
+
+	switch (var->green.length) {
+	case 5:
+		val |= SYS_CLCD_MODE_5551;
+		break;
+	case 6:
+		if (var->red.offset == 0)
+			val |= SYS_CLCD_MODE_565_RLSB;
+		else
+			val |= SYS_CLCD_MODE_565_BLSB;
+		break;
+	case 8:
+		val |= SYS_CLCD_MODE_888;
+		break;
+	}
+
+	/*
+	 * Set the MUX
+	 */
+	writel(val, sys_clcd);
+
+	/*
+	 * And now enable the PSUs
+	 */
+	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+
+	/*
+	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
+	 */
+	if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
+		unsigned long ctrl;
+
+		ctrl = readl(versatile_ib2_ctrl);
+		ctrl |= 0x01;
+		writel(ctrl, versatile_ib2_ctrl);
+	}
+}
+
+/*
+ * Detect which LCD panel is connected, and return the appropriate
+ * clcd_panel structure.  Note: we do not have any information on
+ * the required timings for the 8.4in panel, so we presently assume
+ * VGA timings.
+ */
+static int versatile_clcd_setup(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+	const char *panel_name;
+	u32 val;
+
+	is_sanyo_2_5_lcd = false;
+
+	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
+	if (val == SYS_CLCD_ID_SANYO_3_8)
+		panel_name = "Sanyo TM38QV67A02A";
+	else if (val == SYS_CLCD_ID_SANYO_2_5) {
+		panel_name = "Sanyo QVGA Portrait";
+		is_sanyo_2_5_lcd = true;
+	} else if (val == SYS_CLCD_ID_EPSON_2_2)
+		panel_name = "Epson L2F50113T00";
+	else if (val == SYS_CLCD_ID_VGA)
+		panel_name = "VGA";
+	else {
+		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
+			val);
+		panel_name = "VGA";
+	}
+
+	fb->panel = versatile_clcd_get_panel(panel_name);
+	if (!fb->panel)
+		return -EINVAL;
+
+	return versatile_clcd_setup_dma(fb, SZ_1M);
+}
+
+static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
+{
+	clcdfb_decode(fb, regs);
+
+	/* Always clear BGR for RGB565: we do the routing externally */
+	if (fb->fb.var.green.length == 6)
+		regs->cntl &= ~CNTL_BGR;
+}
+
+static struct clcd_board clcd_plat_data = {
+	.name		= "Versatile",
+	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
+	.check		= clcdfb_check,
+	.decode		= versatile_clcd_decode,
+	.disable	= versatile_clcd_disable,
+	.enable		= versatile_clcd_enable,
+	.setup		= versatile_clcd_setup,
+	.mmap		= versatile_clcd_mmap_dma,
+	.remove		= versatile_clcd_remove_dma,
+};
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate().  Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data),
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
+	{}
+};
+
+static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
+	{
+		.virtual	=  IO_ADDRESS(VERSATILE_SCTL_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_SCTL_BASE),
+		.length		= SZ_4K * 9,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init versatile_map_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
+}
+
+static void __init versatile_init_early(void)
+{
+	u32 val;
+
+	/*
+	 * set clock frequency:
+	 *	VERSATILE_REFCLK is 32KHz
+	 *	VERSATILE_TIMCLK is 1MHz
+	 */
+	val = readl(__io_address(VERSATILE_SCTL_BASE));
+	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+	       __io_address(VERSATILE_SCTL_BASE));
+}
+
+static void __init versatile_dt_pci_init(void)
+{
+	u32 val;
+	struct device_node *np;
+	struct property *newprop;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,versatile-pci");
+	if (!np)
+		return;
+
+	/* Check if PCI backplane is detected */
+	val = readl(versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
+	if (val & 1) {
+		/*
+		 * Enable PCI accesses. Note that the documentaton is
+		 * inconsistent whether or not this is needed, but the old
+		 * driver had it so we will keep it.
+		 */
+		writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
+		return;
+	}
+
+	newprop = kzalloc(sizeof(*newprop), GFP_KERNEL);
+	if (!newprop)
+		return;
+
+	newprop->name = kstrdup("status", GFP_KERNEL);
+	newprop->value = kstrdup("disabled", GFP_KERNEL);
+	newprop->length = sizeof("disabled");
+	of_update_property(np, newprop);
+
+	pr_info("Not plugged into PCI backplane!\n");
+}
 
 static void __init versatile_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     versatile_auxdata_lookup, NULL);
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,core-module-versatile");
+	if (np)
+		versatile_sys_base = of_iomap(np, 0);
+	WARN_ON(!versatile_sys_base);
+
+	versatile_ib2_ctrl = ioremap(VERSATILE_IB2_CTL_BASE, SZ_4K);
+
+	versatile_dt_pci_init();
+
+	of_platform_default_populate(NULL, versatile_auxdata_lookup, NULL);
 }
 
 static const char *const versatile_dt_match[] __initconst = {
@@ -46,5 +358,4 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
 	.init_early	= versatile_init_early,
 	.init_machine	= versatile_dt_init,
 	.dt_compat	= versatile_dt_match,
-	.restart	= versatile_restart,
 MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
deleted file mode 100644
index 9a53d0bd9..000000000
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/versatile_pb.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "core.h"
-
-#if 1
-#define IRQ_MMCI1A	IRQ_VICSOURCE23
-#else
-#define IRQ_MMCI1A	IRQ_SIC_MMCI1A
-#endif
-
-static struct mmci_platform_data mmc1_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
-};
-
-#define UART3_IRQ	{ IRQ_SIC_UART3 }
-#define SCI1_IRQ	{ IRQ_SIC_SCI3 }
-#define MMCI1_IRQ	{ IRQ_MMCI1A, IRQ_SIC_MMCI1B }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-
-/* FPGA Primecells */
-APB_DEVICE(uart3, "fpga:09", UART3,    NULL);
-APB_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
-APB_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
-
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uart3_device,
-	&sci1_device,
-	&mmc1_device,
-};
-
-static void __init versatile_pb_init(void)
-{
-	int i;
-
-	versatile_init();
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.map_io		= versatile_map_io,
-	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
-	.init_time	= versatile_timer_init,
-	.init_machine	= versatile_pb_init,
-	.restart	= versatile_restart,
-MACHINE_END
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 10f938957..7c728ebc0 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,12 +1,13 @@
 menuconfig ARCH_VEXPRESS
-	bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	bool "ARM Ltd. Versatile Express family"
+	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select ARM_TIMER_SP804
 	select COMMON_CLK_VERSATILE
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index f5c1006dd..73caae71f 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -4,7 +4,7 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := \
 	-I$(srctree)/arch/arm/plat-versatile/include
 
-obj-y					:= v2m.o
+obj-$(CONFIG_ARCH_VEXPRESS)		:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
 CFLAGS_dcscb.o				+= -march=armv7-a
 CFLAGS_REMOVE_dcscb.o			= -pg
@@ -15,3 +15,5 @@ CFLAGS_tc2_pm.o				+= -march=armv7-a
 CFLAGS_REMOVE_tc2_pm.o			= -pg
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+
+obj-$(CONFIG_ARCH_MPS2)			+= v2m-mps2.o
diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
new file mode 100644
index 000000000..eacfc3f5c
--- /dev/null
+++ b/arch/arm/mach-vexpress/Makefile.boot
@@ -0,0 +1,3 @@
+# Empty file waiting for deletion once Makefile.boot isn't needed any more.
+# Patch waits for application at
+# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index 2a11d3ac8..a162ab46e 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -1,5 +1,5 @@
 bool vexpress_smp_init_ops(void);
 
-extern struct smp_operations	vexpress_smp_dt_ops;
+extern const struct smp_operations vexpress_smp_dt_ops;
 
 extern void vexpress_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index f0ce6b8f5..d8f1a05f5 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -15,6 +15,8 @@
 #include <asm/smp_plat.h>
 #include <asm/cp15.h>
 
+#include "core.h"
+
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -85,7 +87,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
  *
  * Called with IRQs disabled
  */
-void __ref vexpress_cpu_die(unsigned int cpu)
+void vexpress_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 83188cf18..8b8d0724f 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -64,7 +64,7 @@ static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus)
 	vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
 }
 
-struct smp_operations __initdata vexpress_smp_dt_ops = {
+const struct smp_operations vexpress_smp_dt_ops __initconst = {
 	.smp_prepare_cpus	= vexpress_smp_dt_prepare_cpus,
 	.smp_secondary_init	= versatile_secondary_init,
 	.smp_boot_secondary	= versatile_boot_secondary,
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 5766ce2be..fe4885236 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -31,6 +31,8 @@
 
 #include <asm/cacheflush.h>
 
+#include "spc.h"
+
 #define SPCLOG "vexpress-spc: "
 
 #define PERF_LVL_A15		0x00
@@ -319,17 +321,15 @@ static int ve_spc_waitforcompletion(int req_type)
 
 static int ve_spc_set_performance(int cluster, u32 freq)
 {
-	u32 perf_cfg_reg, perf_stat_reg;
+	u32 perf_cfg_reg;
 	int ret, perf, req_type;
 
 	if (cluster_is_a15(cluster)) {
 		req_type = CA15_DVFS;
 		perf_cfg_reg = PERF_LVL_A15;
-		perf_stat_reg = PERF_REQ_A15;
 	} else {
 		req_type = CA7_DVFS;
 		perf_cfg_reg = PERF_LVL_A7;
-		perf_stat_reg = PERF_REQ_A7;
 	}
 
 	perf = ve_spc_find_performance_index(cluster, freq);
@@ -547,7 +547,7 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
 
 	init.name = dev_name(cpu_dev);
 	init.ops = &clk_spc_ops;
-	init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
+	init.flags = CLK_GET_RATE_NOCACHE;
 	init.num_parents = 0;
 
 	return devm_clk_register(cpu_dev, &spc->hw);
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index b3328cd46..1aa4ccece 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -80,7 +80,7 @@ static void tc2_pm_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
 	 * to the CPU by disabling the GIC CPU IF to prevent wfi
 	 * from completing execution behind power controller back
 	 */
-	gic_cpu_if_down();
+	gic_cpu_if_down(0);
 }
 
 static void tc2_pm_cluster_powerdown_prepare(unsigned int cluster)
diff --git a/arch/arm/mach-vexpress/v2m-mps2.c b/arch/arm/mach-vexpress/v2m-mps2.c
new file mode 100644
index 000000000..e7ad9c272
--- /dev/null
+++ b/arch/arm/mach-vexpress/v2m-mps2.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const mps2_compat[] __initconst = {
+	"arm,mps2",
+	NULL
+};
+
+DT_MACHINE_START(MPS2DT, "MPS2 (Device Tree Support)")
+	.dt_compat = mps2_compat,
+MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index aaaa24fe4..c4f1dba7b 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -1,6 +1,6 @@
 config ARCH_VT8500
 	bool
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select CLKDEV_LOOKUP
 	select VT8500_TIMER
 	select PINCTRL
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3bc0dc9a4..773c04fdb 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -30,7 +30,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #define LEGACY_GPIO_BASE	0xD8110000
 #define LEGACY_PMC_BASE		0xD8130000
@@ -158,8 +157,6 @@ static void __init vt8500_init(void)
 		pm_power_off = &vt8500_power_off;
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const vt8500_dt_compat[] = {
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 213230ee5..ca763251f 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -33,8 +33,8 @@
 #include <mach/hardware.h>
 #include <mach/regs-serial.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-ebi.h>
-#include <mach/regs-timer.h>
+#include "regs-ebi.h"
+#include "regs-timer.h"
 
 #include "cpu.h"
 #include "clock.h"
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index ba05aec7e..55d1a00db 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -20,7 +20,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <mach/hardware.h>
 
@@ -30,7 +30,6 @@
 #define GPIO_IN			(0x0C)
 #define GROUPINERV		(0x10)
 #define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
-#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
 
 #define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
@@ -53,7 +52,7 @@ struct nuc900_gpio_chip {
 
 static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
 	void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
 	unsigned int regval;
 
@@ -65,7 +64,7 @@ static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
 
 static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
 	void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
 	unsigned int regval;
 	unsigned long flags;
@@ -86,7 +85,7 @@ static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 
 static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
 	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
@@ -104,7 +103,7 @@ static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
 
 static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
 	void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
 	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
@@ -149,6 +148,6 @@ void __init nuc900_init_gpio(int nr_group)
 		gpio_chip = &nuc900_gpio[i];
 		spin_lock_init(&gpio_chip->gpio_lock);
 		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
-		gpiochip_add(&gpio_chip->chip);
+		gpiochip_add_data(&gpio_chip->chip, gpio_chip);
 	}
 }
diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h
index 4b7c324ff..3855ecebd 100644
--- a/arch/arm/mach-w90x900/include/mach/uncompress.h
+++ b/arch/arm/mach-w90x900/include/mach/uncompress.h
@@ -27,7 +27,7 @@
 #define TX_DONE	(UART_LSR_TEMT | UART_LSR_THRE)
 static volatile u32 * const uart_base = (u32 *)UART0_PA;
 
-static void putc(int ch)
+static inline void putc(int ch)
 {
 	/* Check THRE and TEMT bits before we transmit the character.
 	 */
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index d66d43ae8..491b317da 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -211,6 +211,6 @@ void __init nuc900_init_irq(void)
 	for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
 		irq_set_chip_and_handler(irqno, &nuc900_irq_chip,
 					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
+		irq_clear_status_flags(irqno, IRQ_NOREQUEST);
 	}
 }
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/regs-ebi.h
index b68455e7f..b68455e7f 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-ebi.h
+++ b/arch/arm/mach-w90x900/regs-ebi.h
diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/regs-gcr.h
index 6087abd93..6087abd93 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-gcr.h
+++ b/arch/arm/mach-w90x900/regs-gcr.h
diff --git a/arch/arm/mach-w90x900/include/mach/regs-timer.h b/arch/arm/mach-w90x900/regs-timer.h
index 8f390620c..8f390620c 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-timer.h
+++ b/arch/arm/mach-w90x900/regs-timer.h
diff --git a/arch/arm/mach-w90x900/include/mach/regs-usb.h b/arch/arm/mach-w90x900/regs-usb.h
index ab74b0c24..ab74b0c24 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-usb.h
+++ b/arch/arm/mach-w90x900/regs-usb.h
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 9230d3725..cda085245 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -31,7 +31,7 @@
 #include <asm/mach/time.h>
 
 #include <mach/map.h>
-#include <mach/regs-timer.h>
+#include "regs-timer.h"
 
 #include "nuc9xx.h"
 
@@ -48,31 +48,32 @@
 
 static unsigned int timer0_load;
 
-static void nuc900_clockevent_setmode(enum clock_event_mode mode,
-		struct clock_event_device *clk)
+static int nuc900_clockevent_shutdown(struct clock_event_device *evt)
 {
-	unsigned int val;
+	unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
 
-	val = __raw_readl(REG_TCSR0);
-	val &= ~(0x03 << 27);
+	__raw_writel(val, REG_TCSR0);
+	return 0;
+}
+
+static int nuc900_clockevent_set_oneshot(struct clock_event_device *evt)
+{
+	unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		__raw_writel(timer0_load, REG_TICR0);
-		val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
-		break;
+	val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
 
-	case CLOCK_EVT_MODE_ONESHOT:
-		val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
-		break;
+	__raw_writel(val, REG_TCSR0);
+	return 0;
+}
 
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+static int nuc900_clockevent_set_periodic(struct clock_event_device *evt)
+{
+	unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
 
+	__raw_writel(timer0_load, REG_TICR0);
+	val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
 	__raw_writel(val, REG_TCSR0);
+	return 0;
 }
 
 static int nuc900_clockevent_setnextevent(unsigned long evt,
@@ -90,11 +91,15 @@ static int nuc900_clockevent_setnextevent(unsigned long evt,
 }
 
 static struct clock_event_device nuc900_clockevent_device = {
-	.name		= "nuc900-timer0",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= nuc900_clockevent_setmode,
-	.set_next_event	= nuc900_clockevent_setnextevent,
-	.rating		= 300,
+	.name			= "nuc900-timer0",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= nuc900_clockevent_shutdown,
+	.set_state_periodic	= nuc900_clockevent_set_periodic,
+	.set_state_oneshot	= nuc900_clockevent_set_oneshot,
+	.tick_resume		= nuc900_clockevent_shutdown,
+	.set_next_event		= nuc900_clockevent_setnextevent,
+	.rating			= 300,
 };
 
 /*IRQ handler for the timer*/
diff --git a/arch/arm/mach-zx/Kconfig b/arch/arm/mach-zx/Kconfig
index 2a910dc0d..209c97944 100644
--- a/arch/arm/mach-zx/Kconfig
+++ b/arch/arm/mach-zx/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_ZX
-	bool "ZTE ZX family" if ARCH_MULTI_V7
+	bool "ZTE ZX family"
+	depends on ARCH_MULTI_V7
 	help
 	  Support for ZTE ZX-based family of processors. TV
 	  set-top-box processor is supported. More will be
@@ -13,6 +14,7 @@ config SOC_ZX296702
 	select ARM_GLOBAL_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
+	select PM_GENERIC_DOMAINS if PM
 	help
 	  Support for ZTE ZX296702 SoC which is a dual core CortexA9MP
 endif
diff --git a/arch/arm/mach-zx/Makefile b/arch/arm/mach-zx/Makefile
index 7c2edf6e5..a4b486433 100644
--- a/arch/arm/mach-zx/Makefile
+++ b/arch/arm/mach-zx/Makefile
@@ -1,2 +1,2 @@
-obj-$(CONFIG_SOC_ZX296702) += zx296702.o
+obj-$(CONFIG_SOC_ZX296702) += zx296702.o zx296702-pm-domain.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-zx/platsmp.c b/arch/arm/mach-zx/platsmp.c
index a3693982d..0297f9208 100644
--- a/arch/arm/mach-zx/platsmp.c
+++ b/arch/arm/mach-zx/platsmp.c
@@ -176,7 +176,7 @@ static void zx_secondary_init(unsigned int cpu)
 	scu_power_mode(scu_base, SCU_PM_NORMAL);
 }
 
-struct smp_operations zx_smp_ops __initdata = {
+static const struct smp_operations zx_smp_ops __initconst = {
 	.smp_prepare_cpus	= zx_smp_prepare_cpus,
 	.smp_secondary_init	= zx_secondary_init,
 	.smp_boot_secondary	= zx_boot_secondary,
diff --git a/arch/arm/mach-zx/zx296702-pm-domain.c b/arch/arm/mach-zx/zx296702-pm-domain.c
new file mode 100644
index 000000000..e08574d4e
--- /dev/null
+++ b/arch/arm/mach-zx/zx296702-pm-domain.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * Author: Jun Nie <jun.nie@linaro.org>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+
+#define PCU_DM_CLKEN        0x18
+#define PCU_DM_RSTEN        0x1C
+#define PCU_DM_ISOEN        0x20
+#define PCU_DM_PWRDN        0x24
+#define PCU_DM_ACK_SYNC     0x28
+
+enum {
+	PCU_DM_NEON0 = 0,
+	PCU_DM_NEON1,
+	PCU_DM_GPU,
+	PCU_DM_DECPPU,
+	PCU_DM_VOU,
+	PCU_DM_R2D,
+	PCU_DM_TOP,
+};
+
+static void __iomem *pcubase;
+
+struct zx_pm_domain {
+	struct generic_pm_domain dm;
+	unsigned int bit;
+};
+
+static int normal_power_off(struct generic_pm_domain *domain)
+{
+	struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain;
+	unsigned long loop = 1000;
+	u32 tmp;
+
+	tmp = readl_relaxed(pcubase + PCU_DM_CLKEN);
+	tmp &= ~BIT(zpd->bit);
+	writel_relaxed(tmp, pcubase + PCU_DM_CLKEN);
+	udelay(5);
+
+	tmp = readl_relaxed(pcubase + PCU_DM_ISOEN);
+	tmp &= ~BIT(zpd->bit);
+	writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_ISOEN);
+	udelay(5);
+
+	tmp = readl_relaxed(pcubase + PCU_DM_RSTEN);
+	tmp &= ~BIT(zpd->bit);
+	writel_relaxed(tmp, pcubase + PCU_DM_RSTEN);
+	udelay(5);
+
+	tmp = readl_relaxed(pcubase + PCU_DM_PWRDN);
+	tmp &= ~BIT(zpd->bit);
+	writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_PWRDN);
+	do {
+		tmp = readl_relaxed(pcubase + PCU_DM_ACK_SYNC) & BIT(zpd->bit);
+	} while (--loop && !tmp);
+
+	if (!loop) {
+		pr_err("Error: %s %s fail\n", __func__, domain->name);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int normal_power_on(struct generic_pm_domain *domain)
+{
+	struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain;
+	unsigned long loop = 10000;
+	u32 tmp;
+
+	tmp = readl_relaxed(pcubase + PCU_DM_PWRDN);
+	tmp &= ~BIT(zpd->bit);
+	writel_relaxed(tmp, pcubase + PCU_DM_PWRDN);
+	do {
+		tmp = readl_relaxed(pcubase + PCU_DM_ACK_SYNC) & BIT(zpd->bit);
+	} while (--loop && tmp);
+
+	if (!loop) {
+		pr_err("Error: %s %s fail\n", __func__, domain->name);
+		return -EIO;
+	}
+
+	tmp = readl_relaxed(pcubase + PCU_DM_RSTEN);
+	tmp &= ~BIT(zpd->bit);
+	writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_RSTEN);
+	udelay(5);
+
+	tmp = readl_relaxed(pcubase + PCU_DM_ISOEN);
+	tmp &= ~BIT(zpd->bit);
+	writel_relaxed(tmp, pcubase + PCU_DM_ISOEN);
+	udelay(5);
+
+	tmp = readl_relaxed(pcubase + PCU_DM_CLKEN);
+	tmp &= ~BIT(zpd->bit);
+	writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_CLKEN);
+	udelay(5);
+	return 0;
+}
+
+static struct zx_pm_domain gpu_domain = {
+	.dm = {
+		.name		= "gpu_domain",
+		.power_off	= normal_power_off,
+		.power_on	= normal_power_on,
+	},
+	.bit = PCU_DM_GPU,
+};
+
+static struct zx_pm_domain decppu_domain = {
+	.dm = {
+		.name		= "decppu_domain",
+		.power_off	= normal_power_off,
+		.power_on	= normal_power_on,
+	},
+	.bit = PCU_DM_DECPPU,
+};
+
+static struct zx_pm_domain vou_domain = {
+	.dm = {
+		.name		= "vou_domain",
+		.power_off	= normal_power_off,
+		.power_on	= normal_power_on,
+	},
+	.bit = PCU_DM_VOU,
+};
+
+static struct zx_pm_domain r2d_domain = {
+	.dm = {
+		.name		= "r2d_domain",
+		.power_off	= normal_power_off,
+		.power_on	= normal_power_on,
+	},
+	.bit = PCU_DM_R2D,
+};
+
+static struct generic_pm_domain *zx296702_pm_domains[] = {
+	&vou_domain.dm,
+	&gpu_domain.dm,
+	&decppu_domain.dm,
+	&r2d_domain.dm,
+};
+
+static int zx296702_pd_probe(struct platform_device *pdev)
+{
+	struct genpd_onecell_data *genpd_data;
+	struct resource *res;
+	int i;
+
+	genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL);
+	if (!genpd_data)
+		return -ENOMEM;
+
+	genpd_data->domains = zx296702_pm_domains;
+	genpd_data->num_domains = ARRAY_SIZE(zx296702_pm_domains);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		return -ENODEV;
+	}
+
+	pcubase = devm_ioremap_resource(&pdev->dev, res);
+	if (!pcubase) {
+		dev_err(&pdev->dev, "ioremap fail.\n");
+		return -EIO;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(zx296702_pm_domains); ++i)
+		pm_genpd_init(zx296702_pm_domains[i], NULL, false);
+
+	of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data);
+	return 0;
+}
+
+static const struct of_device_id zx296702_pm_domain_matches[] __initconst = {
+	{ .compatible = "zte,zx296702-pcu", },
+	{ },
+};
+
+static struct platform_driver zx296702_pd_driver __initdata = {
+	.driver = {
+		.name = "zx-powerdomain",
+		.owner = THIS_MODULE,
+		.of_match_table = zx296702_pm_domain_matches,
+	},
+	.probe = zx296702_pd_probe,
+};
+
+static int __init zx296702_pd_init(void)
+{
+	return platform_driver_register(&zx296702_pd_driver);
+}
+subsys_initcall(zx296702_pd_init);
diff --git a/arch/arm/mach-zx/zx296702.c b/arch/arm/mach-zx/zx296702.c
index 60bb1a8e1..a041e13ab 100644
--- a/arch/arm/mach-zx/zx296702.c
+++ b/arch/arm/mach-zx/zx296702.c
@@ -13,7 +13,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 
-static const char *zx296702_dt_compat[] __initconst = {
+static const char *const zx296702_dt_compat[] __initconst = {
 	"zte,zx296702",
 	NULL,
 };
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 78e5e007f..fd0aeeb09 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,5 +1,7 @@
 config ARCH_ZYNQ
-	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
+	bool "Xilinx Zynq ARM Cortex A9 Platform"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot
deleted file mode 100644
index 760a0efe7..000000000
--- a/arch/arm/mach-zynq/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 616d5840f..d12002cd6 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -110,7 +110,6 @@ static void __init zynq_init_late(void)
  */
 static void __init zynq_init_machine(void)
 {
-	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
 	struct soc_device_attribute *soc_dev_attr;
 	struct soc_device *soc_dev;
 	struct device *parent = NULL;
@@ -142,19 +141,16 @@ out:
 	 * Finished with the static registrations now; fill in the missing
 	 * devices
 	 */
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+	of_platform_default_populate(NULL, NULL, parent);
 
 	platform_device_register(&zynq_cpuidle_device);
-	platform_device_register_full(&devinfo);
 }
 
 static void __init zynq_timer_init(void)
 {
-	zynq_early_slcr_init();
-
 	zynq_clock_init();
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 static struct map_desc zynq_cortex_a9_scu_map __initdata = {
@@ -186,7 +182,7 @@ static void __init zynq_map_io(void)
 
 static void __init zynq_irq_init(void)
 {
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND);
+	zynq_early_slcr_init();
 	irqchip_init();
 }
 
@@ -197,8 +193,8 @@ static const char * const zynq_dt_match[] = {
 
 DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	/* 64KB way size, 8-way associativity, parity disabled */
-	.l2c_aux_val	= 0x00000000,
-	.l2c_aux_mask	= 0xffffffff,
+	.l2c_aux_val    = 0x00400000,
+	.l2c_aux_mask	= 0xffbfffff,
 	.smp		= smp_ops(zynq_smp_ops),
 	.map_io		= zynq_map_io,
 	.init_irq	= zynq_irq_init,
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 79cda2e5f..e771933db 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -30,7 +30,7 @@ extern char zynq_secondary_trampoline;
 extern char zynq_secondary_trampoline_jump;
 extern char zynq_secondary_trampoline_end;
 extern int zynq_cpun_start(u32 address, int cpu);
-extern struct smp_operations zynq_smp_ops __initdata;
+extern const struct smp_operations zynq_smp_ops;
 #endif
 
 extern void __iomem *zynq_scu_base;
diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
index 045c72720..f6d5de073 100644
--- a/arch/arm/mach-zynq/headsmp.S
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -18,7 +18,7 @@ ARM_BE8(rev	r0, r0)
 .globl zynq_secondary_trampoline_jump
 zynq_secondary_trampoline_jump:
 	/* Space for jumping address */
-	.word	/* cpu 1 */
+	.word	0	/* cpu 1 */
 .globl zynq_secondary_trampoline_end
 zynq_secondary_trampoline_end:
 ENDPROC(zynq_secondary_trampoline)
diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index f66816c49..7cd9865bd 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -157,7 +157,7 @@ static void zynq_cpu_die(unsigned int cpu)
 }
 #endif
 
-struct smp_operations zynq_smp_ops __initdata = {
+const struct smp_operations zynq_smp_ops __initconst = {
 	.smp_init_cpus		= zynq_smp_init_cpus,
 	.smp_prepare_cpus	= zynq_smp_prepare_cpus,
 	.smp_boot_secondary	= zynq_boot_secondary,
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 26320ebf3..f0292a30e 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -28,6 +28,7 @@
 #define SLCR_A9_CPU_RST_CTRL_OFFSET	0x244 /* CPU Software Reset Control */
 #define SLCR_REBOOT_STATUS_OFFSET	0x258 /* PS Reboot Status */
 #define SLCR_PSS_IDCODE			0x530 /* PS IDCODE */
+#define SLCR_L2C_RAM			0xA1C /* L2C_RAM in AR#54190 */
 
 #define SLCR_UNLOCK_MAGIC		0xDF0D
 #define SLCR_A9_CPU_CLKSTOP		0x10
@@ -227,6 +228,9 @@ int __init zynq_early_slcr_init(void)
 	/* unlock the SLCR so that registers can be changed */
 	zynq_slcr_unlock();
 
+	/* See AR#54190 design advisory */
+	regmap_update_bits(zynq_slcr_regmap, SLCR_L2C_RAM, 0x70707, 0x20202);
+
 	register_restart_handler(&zynq_slcr_restart_nb);
 
 	pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7c6b976ab..d15a7fe51 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -21,7 +21,7 @@ config CPU_ARM7TDMI
 
 # ARM720T
 config CPU_ARM720T
-	bool "Support ARM720T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
 	select CPU_CACHE_V4
@@ -39,7 +39,7 @@ config CPU_ARM720T
 
 # ARM740T
 config CPU_ARM740T
-	bool "Support ARM740T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -71,7 +71,7 @@ config CPU_ARM9TDMI
 
 # ARM920T
 config CPU_ARM920T
-	bool "Support ARM920T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -89,7 +89,7 @@ config CPU_ARM920T
 
 # ARM922T
 config CPU_ARM922T
-	bool "Support ARM922T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -108,7 +108,7 @@ config CPU_ARM922T
 
 # ARM925T
 config CPU_ARM925T
- 	bool "Support ARM925T processor" if ARCH_OMAP1
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -127,7 +127,7 @@ config CPU_ARM925T
 
 # ARM926T
 config CPU_ARM926T
-	bool "Support ARM926T processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V5) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT
@@ -163,7 +163,7 @@ config CPU_FA526
 
 # ARM940T
 config CPU_ARM940T
-	bool "Support ARM940T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
@@ -181,7 +181,7 @@ config CPU_ARM940T
 
 # ARM946E-S
 config CPU_ARM946E
-	bool "Support ARM946E-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
@@ -198,7 +198,7 @@ config CPU_ARM946E
 
 # ARM1020 - needs validating
 config CPU_ARM1020
-	bool "Support ARM1020T (rev 0) processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -216,7 +216,7 @@ config CPU_ARM1020
 
 # ARM1020E - needs validating
 config CPU_ARM1020E
-	bool "Support ARM1020E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	depends on n
 	select CPU_32v5
 	select CPU_ABRT_EV4T
@@ -229,7 +229,7 @@ config CPU_ARM1020E
 
 # ARM1022E
 config CPU_ARM1022
-	bool "Support ARM1022E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_VIVT
@@ -247,7 +247,7 @@ config CPU_ARM1022
 
 # ARM1026EJ-S
 config CPU_ARM1026
-	bool "Support ARM1026EJ-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
 	select CPU_CACHE_VIVT
@@ -358,7 +358,7 @@ config CPU_PJ4B
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+	bool
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_CACHE_V6
@@ -371,7 +371,7 @@ config CPU_V6
 
 # ARMv6k
 config CPU_V6K
-	bool "Support ARM V6K processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+	bool
 	select CPU_32v6
 	select CPU_32v6K
 	select CPU_ABRT_EV6
@@ -385,7 +385,7 @@ config CPU_V6K
 
 # ARMv7
 config CPU_V7
-	bool "Support ARM V7 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V7) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+	bool
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
@@ -419,28 +419,27 @@ config CPU_THUMBONLY
 config CPU_32v3
 	bool
 	select CPU_USE_DOMAINS if MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
+	select CPU_NO_EFFICIENT_FFS
 
 config CPU_32v4
 	bool
 	select CPU_USE_DOMAINS if MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
+	select CPU_NO_EFFICIENT_FFS
 
 config CPU_32v4T
 	bool
 	select CPU_USE_DOMAINS if MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
+	select CPU_NO_EFFICIENT_FFS
 
 config CPU_32v5
 	bool
 	select CPU_USE_DOMAINS if MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select NEED_KUSER_HELPERS
 	select TLS_REG_EMUL if SMP || !MMU
 
@@ -805,14 +804,6 @@ config TLS_REG_EMUL
 	  a few prototypes like that in existence) and therefore access to
 	  that required register must be emulated.
 
-config NEEDS_SYSCALL_FOR_CMPXCHG
-	bool
-	select NEED_KUSER_HELPERS
-	help
-	  SMP on a pre-ARMv6 processor?  Well OK then.
-	  Forget about fast user space cmpxchg support.
-	  It is just not possible.
-
 config NEED_KUSER_HELPERS
 	bool
 
@@ -883,6 +874,7 @@ config OUTER_CACHE
 
 config OUTER_CACHE_SYNC
 	bool
+	select ARM_HEAVY_MB
 	help
 	  The outer cache has a outer_cache_fns.sync function pointer
 	  that can be used to drain the write buffer of the outer cache.
@@ -985,6 +977,16 @@ config CACHE_TAUROS2
 	  This option enables the Tauros2 L2 cache controller (as
 	  found on PJ1/PJ4).
 
+config CACHE_UNIPHIER
+	bool "Enable the UniPhier outer cache controller"
+	depends on ARCH_UNIPHIER
+	default y
+	select OUTER_CACHE
+	select OUTER_CACHE_SYNC
+	help
+	  This option enables the UniPhier outer cache (system cache)
+	  controller.
+
 config CACHE_XSC3L2
 	bool "Enable the L2 cache on XScale3"
 	depends on CPU_XSC3
@@ -1006,8 +1008,6 @@ config ARM_L1_CACHE_SHIFT
 
 config ARM_DMA_MEM_BUFFERABLE
 	bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7
-	depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
-		     MACH_REALVIEW_PB11MP)
 	default y if CPU_V6 || CPU_V6K || CPU_V7
 	help
 	  Historically, the kernel has used strongly ordered mappings to
@@ -1025,11 +1025,8 @@ config ARM_DMA_MEM_BUFFERABLE
 
 	  You are recommended say 'Y' here and debug any affected drivers.
 
-config ARCH_HAS_BARRIERS
+config ARM_HEAVY_MB
 	bool
-	help
-	  This option allows the use of custom mandatory barriers
-	  included via the mach/barriers.h file.
 
 config ARCH_SUPPORTS_BIG_ENDIAN
 	bool
@@ -1037,24 +1034,26 @@ config ARCH_SUPPORTS_BIG_ENDIAN
 	  This option specifies the architecture can support big endian
 	  operation.
 
-config ARM_KERNMEM_PERMS
-	bool "Restrict kernel memory permissions"
-	depends on MMU
-	help
-	  If this is set, kernel memory other than kernel text (and rodata)
-	  will be made non-executable. The tradeoff is that each region is
-	  padded to section-size (1MiB) boundaries (because their permissions
-	  are different and splitting the 1M pages into 4K ones causes TLB
-	  performance problems), wasting memory.
-
 config DEBUG_RODATA
 	bool "Make kernel text and rodata read-only"
-	depends on ARM_KERNMEM_PERMS
+	depends on MMU && !XIP_KERNEL
+	default y if CPU_V7
+	help
+	  If this is set, kernel text and rodata memory will be made
+	  read-only, and non-text kernel memory will be made non-executable.
+	  The tradeoff is that each region is padded to section-size (1MiB)
+	  boundaries (because their permissions are different and splitting
+	  the 1M pages into 4K ones causes TLB performance problems), which
+	  can waste memory.
+
+config DEBUG_ALIGN_RODATA
+	bool "Make rodata strictly non-executable"
+	depends on DEBUG_RODATA
 	default y
 	help
-	  If this is set, kernel text and rodata will be made read-only. This
-	  is to help catch accidental or malicious attempts to change the
-	  kernel's executable code. Additionally splits rodata from kernel
-	  text so it can be made explicitly non-executable. This creates
-	  another section-size padded region, so it can waste more memory
-	  space while gaining the read-only protections.
+	  If this is set, rodata will be made explicitly non-executable. This
+	  provides protection on the rare chance that attackers might find and
+	  use ROP gadgets that exist in the rodata section. This adds an
+	  additional section-aligned split of rodata from kernel text so it
+	  can be made explicitly non-executable. This padding may waste memory
+	  space to gain the additional protection.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 57c8df500..7f76d96ce 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -103,3 +103,4 @@ obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o l2c-l2x0-resume.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
 obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
+obj-$(CONFIG_CACHE_UNIPHIER)	+= cache-uniphier.o
diff --git a/arch/arm/mm/abort-ev4.S b/arch/arm/mm/abort-ev4.S
index 54473cd4a..b3b31e30c 100644
--- a/arch/arm/mm/abort-ev4.S
+++ b/arch/arm/mm/abort-ev4.S
@@ -19,6 +19,7 @@ ENTRY(v4_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 	ldr	r3, [r4]			@ read aborted ARM instruction
+	uaccess_disable ip			@ disable userspace access
 	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
 	tst	r3, #1 << 20			@ L = 1 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
diff --git a/arch/arm/mm/abort-ev5t.S b/arch/arm/mm/abort-ev5t.S
index a0908d465..a6a381a6c 100644
--- a/arch/arm/mm/abort-ev5t.S
+++ b/arch/arm/mm/abort-ev5t.S
@@ -21,8 +21,10 @@ ENTRY(v5t_early_abort)
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
 	ldreq	r3, [r4]			@ read aborted ARM instruction
+	uaccess_disable ip			@ disable user access
 	bic	r1, r1, #1 << 11		@ clear bits 11 of FSR
-	do_ldrd_abort tmp=ip, insn=r3
+	teq_ldrd tmp=ip, insn=r3		@ insn was LDRD?
+	beq	do_DataAbort			@ yes
 	tst	r3, #1 << 20			@ check write
 	orreq	r1, r1, #1 << 11
 	b	do_DataAbort
diff --git a/arch/arm/mm/abort-ev5tj.S b/arch/arm/mm/abort-ev5tj.S
index 4006b7a61..00ab011be 100644
--- a/arch/arm/mm/abort-ev5tj.S
+++ b/arch/arm/mm/abort-ev5tj.S
@@ -24,7 +24,9 @@ ENTRY(v5tj_early_abort)
 	bne	do_DataAbort
 	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
 	ldreq	r3, [r4]			@ read aborted ARM instruction
-	do_ldrd_abort tmp=ip, insn=r3
+	uaccess_disable ip			@ disable userspace access
+	teq_ldrd tmp=ip, insn=r3		@ insn was LDRD?
+	beq	do_DataAbort			@ yes
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
 	b	do_DataAbort
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 8c48c5c22..8801a15aa 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -26,16 +26,18 @@ ENTRY(v6_early_abort)
 	ldr	ip, =0x4107b36
 	mrc	p15, 0, r3, c0, c0, 0		@ get processor id
 	teq	ip, r3, lsr #4			@ r0 ARM1136?
-	bne	do_DataAbort
+	bne	1f
 	tst	r5, #PSR_J_BIT			@ Java?
 	tsteq	r5, #PSR_T_BIT			@ Thumb?
-	bne	do_DataAbort
+	bne	1f
 	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
 	ldr	r3, [r4]			@ read aborted ARM instruction
  ARM_BE8(rev	r3, r3)
 
-	do_ldrd_abort tmp=ip, insn=r3
+	teq_ldrd tmp=ip, insn=r3		@ insn was LDRD?
+	beq	1f				@ yes
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
 #endif
+1:	uaccess_disable ip			@ disable userspace access
 	b	do_DataAbort
diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S
index 4812ad054..e8d0e08c2 100644
--- a/arch/arm/mm/abort-ev7.S
+++ b/arch/arm/mm/abort-ev7.S
@@ -15,6 +15,7 @@
 ENTRY(v7_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
+	uaccess_disable ip			@ disable userspace access
 
 	/*
 	 * V6 code adjusts the returned DFSR.
diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S
index f3982580c..4cdfab31a 100644
--- a/arch/arm/mm/abort-lv4t.S
+++ b/arch/arm/mm/abort-lv4t.S
@@ -7,7 +7,7 @@
  *	   : r4 = aborted context pc
  *	   : r5 = aborted context psr
  *
- * Returns : r4-r5, r10-r11, r13 preserved
+ * Returns : r4-r5, r9-r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  * Note: we read user space.  This means we might cause a data
@@ -26,6 +26,7 @@ ENTRY(v4t_late_abort)
 #endif
 	bne	.data_thumb_abort
 	ldr	r8, [r4]			@ read arm instruction
+	uaccess_disable ip			@ disable userspace access
 	tst	r8, #1 << 20			@ L = 1 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #15 << 24
@@ -47,7 +48,10 @@ ENTRY(v4t_late_abort)
 /* c */	b	do_DataAbort			@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
 /* d */	b	do_DataAbort			@ ldc	rd, [rn, #m]
 /* e */	b	.data_unknown
-/* f */
+/* f */	b	.data_unknown
+
+.data_unknown_r9:
+	ldr	r9, [sp], #4
 .data_unknown:	@ Part of jumptable
 	mov	r0, r4
 	mov	r1, r8
@@ -56,6 +60,7 @@ ENTRY(v4t_late_abort)
 .data_arm_ldmstm:
 	tst	r8, #1 << 21			@ check writeback bit
 	beq	do_DataAbort			@ no writeback -> no fixup
+	str	r9, [sp, #-4]!
 	mov	r7, #0x11
 	orr	r7, r7, #0x1100
 	and	r6, r8, r7
@@ -74,12 +79,14 @@ ENTRY(v4t_late_abort)
 	subne	r7, r7, r6, lsl #2		@ Undo increment
 	addeq	r7, r7, r6, lsl #2		@ Undo decrement
 	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_arm_lateldrhpre:
 	tst	r8, #1 << 21			@ Check writeback bit
 	beq	do_DataAbort			@ No writeback -> no fixup
 .data_arm_lateldrhpost:
+	str	r9, [sp, #-4]!
 	and	r9, r8, #0x00f			@ get Rm / low nibble of immediate value
 	tst	r8, #1 << 22			@ if (immediate offset)
 	andne	r6, r8, #0xf00			@ { immediate high nibble
@@ -92,6 +99,7 @@ ENTRY(v4t_late_abort)
 	subne	r7, r7, r6			@ Undo incrmenet
 	addeq	r7, r7, r6			@ Undo decrement
 	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_arm_lateldrpreconst:
@@ -100,12 +108,14 @@ ENTRY(v4t_late_abort)
 .data_arm_lateldrpostconst:
 	movs	r6, r8, lsl #20			@ Get offset
 	beq	do_DataAbort			@ zero -> no fixup
+	str	r9, [sp, #-4]!
 	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
 	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
 	tst	r8, #1 << 23			@ Check U bit
 	subne	r7, r7, r6, lsr #20		@ Undo increment
 	addeq	r7, r7, r6, lsr #20		@ Undo decrement
 	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_arm_lateldrprereg:
@@ -114,6 +124,7 @@ ENTRY(v4t_late_abort)
 .data_arm_lateldrpostreg:
 	and	r7, r8, #15			@ Extract 'm' from instruction
 	ldr	r6, [r2, r7, lsl #2]		@ Get register 'Rm'
+	str	r9, [sp, #-4]!
 	mov	r9, r8, lsr #7			@ get shift count
 	ands	r9, r9, #31
 	and	r7, r8, #0x70			@ get shift type
@@ -125,36 +136,37 @@ ENTRY(v4t_late_abort)
 	b	.data_arm_apply_r6_and_rn
 	b	.data_arm_apply_r6_and_rn	@ 1: LSL #0
 	nop
-	b	.data_unknown			@ 2: MUL?
+	b	.data_unknown_r9		@ 2: MUL?
 	nop
-	b	.data_unknown			@ 3: MUL?
+	b	.data_unknown_r9		@ 3: MUL?
 	nop
 	mov	r6, r6, lsr r9			@ 4: LSR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, lsr #32			@ 5: LSR #32
 	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ 6: MUL?
+	b	.data_unknown_r9		@ 6: MUL?
 	nop
-	b	.data_unknown			@ 7: MUL?
+	b	.data_unknown_r9		@ 7: MUL?
 	nop
 	mov	r6, r6, asr r9			@ 8: ASR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, asr #32			@ 9: ASR #32
 	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ A: MUL?
+	b	.data_unknown_r9		@ A: MUL?
 	nop
-	b	.data_unknown			@ B: MUL?
+	b	.data_unknown_r9		@ B: MUL?
 	nop
 	mov	r6, r6, ror r9			@ C: ROR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, rrx			@ D: RRX
 	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ E: MUL?
+	b	.data_unknown_r9		@ E: MUL?
 	nop
-	b	.data_unknown			@ F: MUL?
+	b	.data_unknown_r9		@ F: MUL?
 
 .data_thumb_abort:
 	ldrh	r8, [r4]			@ read instruction
+	uaccess_disable ip			@ disable userspace access
 	tst	r8, #1 << 11			@ L = 1 -> write?
 	orreq	r1, r1, #1 << 8			@ yes
 	and	r7, r8, #15 << 12
@@ -188,6 +200,7 @@ ENTRY(v4t_late_abort)
 .data_thumb_pushpop:
 	tst	r8, #1 << 10
 	beq	.data_unknown
+	str	r9, [sp, #-4]!
 	and	r6, r8, #0x55			@ hweight8(r8) + R bit
 	and	r9, r8, #0xaa
 	add	r6, r6, r9, lsr #1
@@ -202,9 +215,11 @@ ENTRY(v4t_late_abort)
 	addeq	r7, r7, r6, lsl #2		@ increment SP if PUSH
 	subne	r7, r7, r6, lsl #2		@ decrement SP if POP
 	str	r7, [r2, #13 << 2]
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_thumb_ldmstm:
+	str	r9, [sp, #-4]!
 	and	r6, r8, #0x55			@ hweight8(r8)
 	and	r9, r8, #0xaa
 	add	r6, r6, r9, lsr #1
@@ -217,4 +232,5 @@ ENTRY(v4t_late_abort)
 	and	r6, r6, #15			@ number of regs to transfer
 	sub	r7, r7, r6, lsl #2		@ always decrement
 	str	r7, [r2, r9, lsr #6]
+	ldr	r9, [sp], #4
 	b	do_DataAbort
diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S
index 2cbf68ef0..4509bee4e 100644
--- a/arch/arm/mm/abort-macro.S
+++ b/arch/arm/mm/abort-macro.S
@@ -13,6 +13,7 @@
 	tst	\psr, #PSR_T_BIT
 	beq	not_thumb
 	ldrh	\tmp, [\pc]			@ Read aborted Thumb instruction
+	uaccess_disable ip			@ disable userspace access
 	and	\tmp, \tmp, # 0xfe00		@ Mask opcode field
 	cmp	\tmp, # 0x5600			@ Is it ldrsb?
 	orreq	\tmp, \tmp, #1 << 11		@ Set L-bit if yes
@@ -29,12 +30,9 @@ not_thumb:
  *   [7:4] == 1101
  *    [20] == 0
  */
-	.macro	do_ldrd_abort, tmp, insn
-	tst	\insn, #0x0e100000		@ [27:25,20] == 0
-	bne	not_ldrd
-	and	\tmp, \insn, #0x000000f0	@ [7:4] == 1101
-	cmp	\tmp, #0x000000d0
-	beq	do_DataAbort
-not_ldrd:
+	.macro	teq_ldrd, tmp, insn
+	mov	\tmp, #0x0e100000
+	orr	\tmp, #0x000000f0
+	and	\tmp, \insn, \tmp
+	teq	\tmp, #0x000000d0
 	.endm
-
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 9769f1eef..7d5f4c736 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -365,15 +365,21 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
  user:
 	if (LDST_L_BIT(instr)) {
 		unsigned long val;
+		unsigned int __ua_flags = uaccess_save_and_enable();
+
 		get16t_unaligned_check(val, addr);
+		uaccess_restore(__ua_flags);
 
 		/* signed half-word? */
 		if (instr & 0x40)
 			val = (signed long)((signed short) val);
 
 		regs->uregs[rd] = val;
-	} else
+	} else {
+		unsigned int __ua_flags = uaccess_save_and_enable();
 		put16t_unaligned_check(regs->uregs[rd], addr);
+		uaccess_restore(__ua_flags);
+	}
 
 	return TYPE_LDST;
 
@@ -420,14 +426,21 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 
  user:
 	if (load) {
-		unsigned long val;
+		unsigned long val, val2;
+		unsigned int __ua_flags = uaccess_save_and_enable();
+
 		get32t_unaligned_check(val, addr);
+		get32t_unaligned_check(val2, addr + 4);
+
+		uaccess_restore(__ua_flags);
+
 		regs->uregs[rd] = val;
-		get32t_unaligned_check(val, addr + 4);
-		regs->uregs[rd2] = val;
+		regs->uregs[rd2] = val2;
 	} else {
+		unsigned int __ua_flags = uaccess_save_and_enable();
 		put32t_unaligned_check(regs->uregs[rd], addr);
 		put32t_unaligned_check(regs->uregs[rd2], addr + 4);
+		uaccess_restore(__ua_flags);
 	}
 
 	return TYPE_LDST;
@@ -458,10 +471,15 @@ do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *reg
  trans:
 	if (LDST_L_BIT(instr)) {
 		unsigned int val;
+		unsigned int __ua_flags = uaccess_save_and_enable();
 		get32t_unaligned_check(val, addr);
+		uaccess_restore(__ua_flags);
 		regs->uregs[rd] = val;
-	} else
+	} else {
+		unsigned int __ua_flags = uaccess_save_and_enable();
 		put32t_unaligned_check(regs->uregs[rd], addr);
+		uaccess_restore(__ua_flags);
+	}
 	return TYPE_LDST;
 
  fault:
@@ -531,6 +549,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
 #endif
 
 	if (user_mode(regs)) {
+		unsigned int __ua_flags = uaccess_save_and_enable();
 		for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
 		     regbits >>= 1, rd += 1)
 			if (regbits & 1) {
@@ -542,6 +561,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
 					put32t_unaligned_check(regs->uregs[rd], eaddr);
 				eaddr += 4;
 			}
+		uaccess_restore(__ua_flags);
 	} else {
 		for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
 		     regbits >>= 1, rd += 1)
@@ -783,7 +803,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 			}
 		}
 	} else {
-		fault = probe_kernel_address(instrptr, instr);
+		fault = probe_kernel_address((void *)instrptr, instr);
 		instr = __mem_to_opcode_arm(instr);
 	}
 
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 097181e08..5c1b7a7b9 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -368,7 +368,6 @@ int __init feroceon_of_init(void)
 	struct device_node *node;
 	void __iomem *base;
 	bool l2_wt_override = false;
-	struct resource res;
 
 #if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 	l2_wt_override = true;
@@ -376,10 +375,7 @@ int __init feroceon_of_init(void)
 
 	node = of_find_matching_node(NULL, feroceon_ids);
 	if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) {
-		if (of_address_to_resource(node, 0, &res))
-			return -ENODEV;
-
-		base = ioremap(res.start, resource_size(&res));
+		base = of_iomap(node, 0);
 		if (!base)
 			return -ENOMEM;
 
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 71b3d3309..cc12905ae 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -597,17 +597,16 @@ static void l2c310_configure(void __iomem *base)
 			      L310_POWER_CTRL);
 }
 
-static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, void *data)
+static int l2c310_starting_cpu(unsigned int cpu)
 {
-	switch (act & ~CPU_TASKS_FROZEN) {
-	case CPU_STARTING:
-		set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
-		break;
-	case CPU_DYING:
-		set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
-		break;
-	}
-	return NOTIFY_OK;
+	set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
+	return 0;
+}
+
+static int l2c310_dying_cpu(unsigned int cpu)
+{
+	set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
+	return 0;
 }
 
 static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
@@ -647,11 +646,6 @@ static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
 		aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP);
 	}
 
-	/* r3p0 or later has power control register */
-	if (rev >= L310_CACHE_ID_RTL_R3P0)
-		l2x0_saved_regs.pwr_ctrl = L310_DYNAMIC_CLK_GATING_EN |
-						L310_STNDBY_MODE_EN;
-
 	/*
 	 * Always enable non-secure access to the lockdown registers -
 	 * we write to them as part of the L2C enable sequence so they
@@ -683,10 +677,10 @@ static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
 			power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis");
 	}
 
-	if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) {
-		set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
-		cpu_notifier(l2c310_cpu_enable_flz, 0);
-	}
+	if (aux & L310_AUX_CTRL_FULL_LINE_ZERO)
+		cpuhp_setup_state(CPUHP_AP_ARM_L2X0_STARTING,
+				  "AP_ARM_L2X0_STARTING", l2c310_starting_cpu,
+				  l2c310_dying_cpu);
 }
 
 static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
@@ -790,7 +784,7 @@ static const struct l2c_init_data l2c310_init_fns __initconst = {
 };
 
 static int __init __l2c_init(const struct l2c_init_data *data,
-			     u32 aux_val, u32 aux_mask, u32 cache_id)
+			     u32 aux_val, u32 aux_mask, u32 cache_id, bool nosync)
 {
 	struct outer_cache_fns fns;
 	unsigned way_size_bits, ways;
@@ -866,6 +860,10 @@ static int __init __l2c_init(const struct l2c_init_data *data,
 	fns.configure = outer_cache.configure;
 	if (data->fixup)
 		data->fixup(l2x0_base, cache_id, &fns);
+	if (nosync) {
+		pr_info("L2C: disabling outer sync\n");
+		fns.sync = NULL;
+	}
 
 	/*
 	 * Check if l2x0 controller is already enabled.  If we are booting
@@ -925,7 +923,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	if (data->save)
 		data->save(l2x0_base);
 
-	__l2c_init(data, aux_val, aux_mask, cache_id);
+	__l2c_init(data, aux_val, aux_mask, cache_id, false);
 }
 
 #ifdef CONFIG_OF
@@ -1060,6 +1058,18 @@ static void __init l2x0_of_parse(const struct device_node *np,
 		val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
 	}
 
+	if (of_property_read_bool(np, "arm,parity-enable")) {
+		mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+		val |= L2C_AUX_CTRL_PARITY_ENABLE;
+	} else if (of_property_read_bool(np, "arm,parity-disable")) {
+		mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+	}
+
+	if (of_property_read_bool(np, "arm,shared-override")) {
+		mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
+		val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
+	}
+
 	ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
 	if (ret)
 		return;
@@ -1125,6 +1135,7 @@ static void __init l2c310_of_parse(const struct device_node *np,
 	u32 filter[2] = { 0, 0 };
 	u32 assoc;
 	u32 prefetch;
+	u32 power;
 	u32 val;
 	int ret;
 
@@ -1171,6 +1182,19 @@ static void __init l2c310_of_parse(const struct device_node *np,
 		}
 	}
 
+	if (of_property_read_bool(np, "arm,shared-override")) {
+		*aux_val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
+		*aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
+	}
+
+	if (of_property_read_bool(np, "arm,parity-enable")) {
+		*aux_val |= L2C_AUX_CTRL_PARITY_ENABLE;
+		*aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+	} else if (of_property_read_bool(np, "arm,parity-disable")) {
+		*aux_val &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+		*aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+	}
+
 	prefetch = l2x0_saved_regs.prefetch_ctrl;
 
 	ret = of_property_read_u32(np, "arm,double-linefill", &val);
@@ -1242,6 +1266,26 @@ static void __init l2c310_of_parse(const struct device_node *np,
 	}
 
 	l2x0_saved_regs.prefetch_ctrl = prefetch;
+
+	power = l2x0_saved_regs.pwr_ctrl |
+		L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN;
+
+	ret = of_property_read_u32(np, "arm,dynamic-clock-gating", &val);
+	if (!ret) {
+		if (!val)
+			power &= ~L310_DYNAMIC_CLK_GATING_EN;
+	} else if (ret != -EINVAL) {
+		pr_err("L2C-310 OF dynamic-clock-gating property value is missing or invalid\n");
+	}
+	ret = of_property_read_u32(np, "arm,standby-mode", &val);
+	if (!ret) {
+		if (!val)
+			power &= ~L310_STNDBY_MODE_EN;
+	} else if (ret != -EINVAL) {
+		pr_err("L2C-310 OF standby-mode property value is missing or invalid\n");
+	}
+
+	l2x0_saved_regs.pwr_ctrl = power;
 }
 
 static const struct l2c_init_data of_l2c310_data __initconst = {
@@ -1699,6 +1743,7 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 	struct resource res;
 	u32 cache_id, old_aux;
 	u32 cache_level = 2;
+	bool nosync = false;
 
 	np = of_find_matching_node(NULL, l2x0_ids);
 	if (!np)
@@ -1737,6 +1782,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 	if (cache_level != 2)
 		pr_err("L2C: device tree specifies invalid cache level\n");
 
+	nosync = of_property_read_bool(np, "arm,outer-sync-disable");
+
 	/* Read back current (default) hardware configuration */
 	if (data->save)
 		data->save(l2x0_base);
@@ -1751,6 +1798,6 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 	else
 		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
 
-	return __l2c_init(data, aux_val, aux_mask, cache_id);
+	return __l2c_init(data, aux_val, aux_mask, cache_id, nosync);
 }
 #endif
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 1e373d268..88255bea6 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -22,6 +22,11 @@
 #include <asm/cputype.h>
 #include <asm/hardware/cache-tauros2.h>
 
+/* CP15 PJ4 Control configuration register */
+#define CCR_L2C_PREFETCH_DISABLE	BIT(24)
+#define CCR_L2C_ECC_ENABLE		BIT(23)
+#define CCR_L2C_WAY7_4_DISABLE		BIT(21)
+#define CCR_L2C_BURST8_ENABLE		BIT(20)
 
 /*
  * When Tauros2 is used on a CPU that supports the v7 hierarchical
@@ -182,18 +187,18 @@ static void enable_extra_feature(unsigned int features)
 	u = read_extra_features();
 
 	if (features & CACHE_TAUROS2_PREFETCH_ON)
-		u &= ~0x01000000;
+		u &= ~CCR_L2C_PREFETCH_DISABLE;
 	else
-		u |= 0x01000000;
+		u |= CCR_L2C_PREFETCH_DISABLE;
 	pr_info("Tauros2: %s L2 prefetch.\n",
 			(features & CACHE_TAUROS2_PREFETCH_ON)
 			? "Enabling" : "Disabling");
 
 	if (features & CACHE_TAUROS2_LINEFILL_BURST8)
-		u |= 0x00100000;
+		u |= CCR_L2C_BURST8_ENABLE;
 	else
-		u &= ~0x00100000;
-	pr_info("Tauros2: %s line fill burt8.\n",
+		u &= ~CCR_L2C_BURST8_ENABLE;
+	pr_info("Tauros2: %s burst8 line fill.\n",
 			(features & CACHE_TAUROS2_LINEFILL_BURST8)
 			? "Enabling" : "Disabling");
 
@@ -287,16 +292,15 @@ void __init tauros2_init(unsigned int features)
 	node = of_find_matching_node(NULL, tauros2_ids);
 	if (!node) {
 		pr_info("Not found marvell,tauros2-cache, disable it\n");
-		return;
+	} else {
+		ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
+		if (ret) {
+			pr_info("Not found marvell,tauros-cache-features property, "
+				"disable extra features\n");
+			features = 0;
+		} else
+			features = f;
 	}
-
-	ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
-	if (ret) {
-		pr_info("Not found marvell,tauros-cache-features property, "
-			"disable extra features\n");
-		features = 0;
-	} else
-		features = f;
 #endif
 	tauros2_internal_init(features);
 }
diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c
new file mode 100644
index 000000000..c8e2f4947
--- /dev/null
+++ b/arch/arm/mm/cache-uniphier.c
@@ -0,0 +1,566 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)		"uniphier: " fmt
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/outercache.h>
+
+/* control registers */
+#define UNIPHIER_SSCC		0x0	/* Control Register */
+#define    UNIPHIER_SSCC_BST			BIT(20)	/* UCWG burst read */
+#define    UNIPHIER_SSCC_ACT			BIT(19)	/* Inst-Data separate */
+#define    UNIPHIER_SSCC_WTG			BIT(18)	/* WT gathering on */
+#define    UNIPHIER_SSCC_PRD			BIT(17)	/* enable pre-fetch */
+#define    UNIPHIER_SSCC_ON			BIT(0)	/* enable cache */
+#define UNIPHIER_SSCLPDAWCR	0x30	/* Unified/Data Active Way Control */
+#define UNIPHIER_SSCLPIAWCR	0x34	/* Instruction Active Way Control */
+
+/* revision registers */
+#define UNIPHIER_SSCID		0x0	/* ID Register */
+
+/* operation registers */
+#define UNIPHIER_SSCOPE		0x244	/* Cache Operation Primitive Entry */
+#define    UNIPHIER_SSCOPE_CM_INV		0x0	/* invalidate */
+#define    UNIPHIER_SSCOPE_CM_CLEAN		0x1	/* clean */
+#define    UNIPHIER_SSCOPE_CM_FLUSH		0x2	/* flush */
+#define    UNIPHIER_SSCOPE_CM_SYNC		0x8	/* sync (drain bufs) */
+#define    UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH	0x9	/* flush p-fetch buf */
+#define UNIPHIER_SSCOQM		0x248	/* Cache Operation Queue Mode */
+#define    UNIPHIER_SSCOQM_TID_MASK		(0x3 << 21)
+#define    UNIPHIER_SSCOQM_TID_LRU_DATA		(0x0 << 21)
+#define    UNIPHIER_SSCOQM_TID_LRU_INST		(0x1 << 21)
+#define    UNIPHIER_SSCOQM_TID_WAY		(0x2 << 21)
+#define    UNIPHIER_SSCOQM_S_MASK		(0x3 << 17)
+#define    UNIPHIER_SSCOQM_S_RANGE		(0x0 << 17)
+#define    UNIPHIER_SSCOQM_S_ALL		(0x1 << 17)
+#define    UNIPHIER_SSCOQM_S_WAY		(0x2 << 17)
+#define    UNIPHIER_SSCOQM_CE			BIT(15)	/* notify completion */
+#define    UNIPHIER_SSCOQM_CM_INV		0x0	/* invalidate */
+#define    UNIPHIER_SSCOQM_CM_CLEAN		0x1	/* clean */
+#define    UNIPHIER_SSCOQM_CM_FLUSH		0x2	/* flush */
+#define    UNIPHIER_SSCOQM_CM_PREFETCH		0x3	/* prefetch to cache */
+#define    UNIPHIER_SSCOQM_CM_PREFETCH_BUF	0x4	/* prefetch to pf-buf */
+#define    UNIPHIER_SSCOQM_CM_TOUCH		0x5	/* touch */
+#define    UNIPHIER_SSCOQM_CM_TOUCH_ZERO	0x6	/* touch to zero */
+#define    UNIPHIER_SSCOQM_CM_TOUCH_DIRTY	0x7	/* touch with dirty */
+#define UNIPHIER_SSCOQAD	0x24c	/* Cache Operation Queue Address */
+#define UNIPHIER_SSCOQSZ	0x250	/* Cache Operation Queue Size */
+#define UNIPHIER_SSCOQMASK	0x254	/* Cache Operation Queue Address Mask */
+#define UNIPHIER_SSCOQWN	0x258	/* Cache Operation Queue Way Number */
+#define UNIPHIER_SSCOPPQSEF	0x25c	/* Cache Operation Queue Set Complete*/
+#define    UNIPHIER_SSCOPPQSEF_FE		BIT(1)
+#define    UNIPHIER_SSCOPPQSEF_OE		BIT(0)
+#define UNIPHIER_SSCOLPQS	0x260	/* Cache Operation Queue Status */
+#define    UNIPHIER_SSCOLPQS_EF			BIT(2)
+#define    UNIPHIER_SSCOLPQS_EST		BIT(1)
+#define    UNIPHIER_SSCOLPQS_QST		BIT(0)
+
+/* Is the touch/pre-fetch destination specified by ways? */
+#define UNIPHIER_SSCOQM_TID_IS_WAY(op) \
+		((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)
+/* Is the operation region specified by address range? */
+#define UNIPHIER_SSCOQM_S_IS_RANGE(op) \
+		((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
+
+/**
+ * uniphier_cache_data - UniPhier outer cache specific data
+ *
+ * @ctrl_base: virtual base address of control registers
+ * @rev_base: virtual base address of revision registers
+ * @op_base: virtual base address of operation registers
+ * @way_present_mask: each bit specifies if the way is present
+ * @way_locked_mask: each bit specifies if the way is locked
+ * @nsets: number of associativity sets
+ * @line_size: line size in bytes
+ * @range_op_max_size: max size that can be handled by a single range operation
+ * @list: list node to include this level in the whole cache hierarchy
+ */
+struct uniphier_cache_data {
+	void __iomem *ctrl_base;
+	void __iomem *rev_base;
+	void __iomem *op_base;
+	void __iomem *way_ctrl_base;
+	u32 way_present_mask;
+	u32 way_locked_mask;
+	u32 nsets;
+	u32 line_size;
+	u32 range_op_max_size;
+	struct list_head list;
+};
+
+/*
+ * List of the whole outer cache hierarchy.  This list is only modified during
+ * the early boot stage, so no mutex is taken for the access to the list.
+ */
+static LIST_HEAD(uniphier_cache_list);
+
+/**
+ * __uniphier_cache_sync - perform a sync point for a particular cache level
+ *
+ * @data: cache controller specific data
+ */
+static void __uniphier_cache_sync(struct uniphier_cache_data *data)
+{
+	/* This sequence need not be atomic.  Do not disable IRQ. */
+	writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC,
+		       data->op_base + UNIPHIER_SSCOPE);
+	/* need a read back to confirm */
+	readl_relaxed(data->op_base + UNIPHIER_SSCOPE);
+}
+
+/**
+ * __uniphier_cache_maint_common - run a queue operation for a particular level
+ *
+ * @data: cache controller specific data
+ * @start: start address of range operation (don't care for "all" operation)
+ * @size: data size of range operation (don't care for "all" operation)
+ * @operation: flags to specify the desired cache operation
+ */
+static void __uniphier_cache_maint_common(struct uniphier_cache_data *data,
+					  unsigned long start,
+					  unsigned long size,
+					  u32 operation)
+{
+	unsigned long flags;
+
+	/*
+	 * No spin lock is necessary here because:
+	 *
+	 * [1] This outer cache controller is able to accept maintenance
+	 * operations from multiple CPUs at a time in an SMP system; if a
+	 * maintenance operation is under way and another operation is issued,
+	 * the new one is stored in the queue.  The controller performs one
+	 * operation after another.  If the queue is full, the status register,
+	 * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has
+	 * failed.  The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have
+	 * different instances for each CPU, i.e. each CPU can track the status
+	 * of the maintenance operations triggered by itself.
+	 *
+	 * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ,
+	 * SSCOQWN}, are shared between multiple CPUs, but the hardware still
+	 * guarantees the registration sequence is atomic; the write access to
+	 * them are arbitrated by the hardware.  The first accessor to the
+	 * register, UNIPHIER_SSCOQM, holds the access right and it is released
+	 * by reading the status register, UNIPHIER_SSCOPPQSEF.  While one CPU
+	 * is holding the access right, other CPUs fail to register operations.
+	 * One CPU should not hold the access right for a long time, so local
+	 * IRQs should be disabled while the following sequence.
+	 */
+	local_irq_save(flags);
+
+	/* clear the complete notification flag */
+	writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS);
+
+	do {
+		/* set cache operation */
+		writel_relaxed(UNIPHIER_SSCOQM_CE | operation,
+			       data->op_base + UNIPHIER_SSCOQM);
+
+		/* set address range if needed */
+		if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) {
+			writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD);
+			writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ);
+		}
+
+		/* set target ways if needed */
+		if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation)))
+			writel_relaxed(data->way_locked_mask,
+				       data->op_base + UNIPHIER_SSCOQWN);
+	} while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) &
+			  (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
+
+	/* wait until the operation is completed */
+	while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) !=
+		      UNIPHIER_SSCOLPQS_EF))
+		cpu_relax();
+
+	local_irq_restore(flags);
+}
+
+static void __uniphier_cache_maint_all(struct uniphier_cache_data *data,
+				       u32 operation)
+{
+	__uniphier_cache_maint_common(data, 0, 0,
+				      UNIPHIER_SSCOQM_S_ALL | operation);
+
+	__uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_maint_range(struct uniphier_cache_data *data,
+					 unsigned long start, unsigned long end,
+					 u32 operation)
+{
+	unsigned long size;
+
+	/*
+	 * If the start address is not aligned,
+	 * perform a cache operation for the first cache-line
+	 */
+	start = start & ~(data->line_size - 1);
+
+	size = end - start;
+
+	if (unlikely(size >= (unsigned long)(-data->line_size))) {
+		/* this means cache operation for all range */
+		__uniphier_cache_maint_all(data, operation);
+		return;
+	}
+
+	/*
+	 * If the end address is not aligned,
+	 * perform a cache operation for the last cache-line
+	 */
+	size = ALIGN(size, data->line_size);
+
+	while (size) {
+		unsigned long chunk_size = min_t(unsigned long, size,
+						 data->range_op_max_size);
+
+		__uniphier_cache_maint_common(data, start, chunk_size,
+					UNIPHIER_SSCOQM_S_RANGE | operation);
+
+		start += chunk_size;
+		size -= chunk_size;
+	}
+
+	__uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on)
+{
+	u32 val = 0;
+
+	if (on)
+		val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON;
+
+	writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC);
+}
+
+static void __init __uniphier_cache_set_locked_ways(
+					struct uniphier_cache_data *data,
+					u32 way_mask)
+{
+	unsigned int cpu;
+
+	data->way_locked_mask = way_mask & data->way_present_mask;
+
+	for_each_possible_cpu(cpu)
+		writel_relaxed(~data->way_locked_mask & data->way_present_mask,
+			       data->way_ctrl_base + 4 * cpu);
+}
+
+static void uniphier_cache_maint_range(unsigned long start, unsigned long end,
+				       u32 operation)
+{
+	struct uniphier_cache_data *data;
+
+	list_for_each_entry(data, &uniphier_cache_list, list)
+		__uniphier_cache_maint_range(data, start, end, operation);
+}
+
+static void uniphier_cache_maint_all(u32 operation)
+{
+	struct uniphier_cache_data *data;
+
+	list_for_each_entry(data, &uniphier_cache_list, list)
+		__uniphier_cache_maint_all(data, operation);
+}
+
+static void uniphier_cache_inv_range(unsigned long start, unsigned long end)
+{
+	uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_clean_range(unsigned long start, unsigned long end)
+{
+	uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN);
+}
+
+static void uniphier_cache_flush_range(unsigned long start, unsigned long end)
+{
+	uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void __init uniphier_cache_inv_all(void)
+{
+	uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_flush_all(void)
+{
+	uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void uniphier_cache_disable(void)
+{
+	struct uniphier_cache_data *data;
+
+	list_for_each_entry_reverse(data, &uniphier_cache_list, list)
+		__uniphier_cache_enable(data, false);
+
+	uniphier_cache_flush_all();
+}
+
+static void __init uniphier_cache_enable(void)
+{
+	struct uniphier_cache_data *data;
+
+	uniphier_cache_inv_all();
+
+	list_for_each_entry(data, &uniphier_cache_list, list) {
+		__uniphier_cache_enable(data, true);
+		__uniphier_cache_set_locked_ways(data, 0);
+	}
+}
+
+static void uniphier_cache_sync(void)
+{
+	struct uniphier_cache_data *data;
+
+	list_for_each_entry(data, &uniphier_cache_list, list)
+		__uniphier_cache_sync(data);
+}
+
+int __init uniphier_cache_l2_is_enabled(void)
+{
+	struct uniphier_cache_data *data;
+
+	data = list_first_entry_or_null(&uniphier_cache_list,
+					struct uniphier_cache_data, list);
+	if (!data)
+		return 0;
+
+	return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) &
+		  UNIPHIER_SSCC_ON);
+}
+
+void __init uniphier_cache_l2_touch_range(unsigned long start,
+					  unsigned long end)
+{
+	struct uniphier_cache_data *data;
+
+	data = list_first_entry_or_null(&uniphier_cache_list,
+					struct uniphier_cache_data, list);
+	if (data)
+		__uniphier_cache_maint_range(data, start, end,
+					     UNIPHIER_SSCOQM_TID_WAY |
+					     UNIPHIER_SSCOQM_CM_TOUCH);
+}
+
+void __init uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+	struct uniphier_cache_data *data;
+
+	data = list_first_entry_or_null(&uniphier_cache_list,
+					struct uniphier_cache_data, list);
+	if (data)
+		__uniphier_cache_set_locked_ways(data, way_mask);
+}
+
+static const struct of_device_id uniphier_cache_match[] __initconst = {
+	{
+		.compatible = "socionext,uniphier-system-cache",
+	},
+	{ /* sentinel */ }
+};
+
+static int __init __uniphier_cache_init(struct device_node *np,
+					unsigned int *cache_level)
+{
+	struct uniphier_cache_data *data;
+	u32 level, cache_size;
+	struct device_node *next_np;
+	int ret = 0;
+
+	if (!of_match_node(uniphier_cache_match, np)) {
+		pr_err("L%d: not compatible with uniphier cache\n",
+		       *cache_level);
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(np, "cache-level", &level)) {
+		pr_err("L%d: cache-level is not specified\n", *cache_level);
+		return -EINVAL;
+	}
+
+	if (level != *cache_level) {
+		pr_err("L%d: cache-level is unexpected value %d\n",
+		       *cache_level, level);
+		return -EINVAL;
+	}
+
+	if (!of_property_read_bool(np, "cache-unified")) {
+		pr_err("L%d: cache-unified is not specified\n", *cache_level);
+		return -EINVAL;
+	}
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	if (of_property_read_u32(np, "cache-line-size", &data->line_size) ||
+	    !is_power_of_2(data->line_size)) {
+		pr_err("L%d: cache-line-size is unspecified or invalid\n",
+		       *cache_level);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (of_property_read_u32(np, "cache-sets", &data->nsets) ||
+	    !is_power_of_2(data->nsets)) {
+		pr_err("L%d: cache-sets is unspecified or invalid\n",
+		       *cache_level);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (of_property_read_u32(np, "cache-size", &cache_size) ||
+	    cache_size == 0 || cache_size % (data->nsets * data->line_size)) {
+		pr_err("L%d: cache-size is unspecified or invalid\n",
+		       *cache_level);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	data->way_present_mask =
+		((u32)1 << cache_size / data->nsets / data->line_size) - 1;
+
+	data->ctrl_base = of_iomap(np, 0);
+	if (!data->ctrl_base) {
+		pr_err("L%d: failed to map control register\n", *cache_level);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	data->rev_base = of_iomap(np, 1);
+	if (!data->rev_base) {
+		pr_err("L%d: failed to map revision register\n", *cache_level);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	data->op_base = of_iomap(np, 2);
+	if (!data->op_base) {
+		pr_err("L%d: failed to map operation register\n", *cache_level);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	data->way_ctrl_base = data->ctrl_base + 0xc00;
+
+	if (*cache_level == 2) {
+		u32 revision = readl(data->rev_base + UNIPHIER_SSCID);
+		/*
+		 * The size of range operation is limited to (1 << 22) or less
+		 * for PH-sLD8 or older SoCs.
+		 */
+		if (revision <= 0x16)
+			data->range_op_max_size = (u32)1 << 22;
+
+		/*
+		 * Unfortunatly, the offset address of active way control base
+		 * varies from SoC to SoC.
+		 */
+		switch (revision) {
+		case 0x11:	/* sLD3 */
+			data->way_ctrl_base = data->ctrl_base + 0x870;
+			break;
+		case 0x12:	/* LD4 */
+		case 0x16:	/* sld8 */
+			data->way_ctrl_base = data->ctrl_base + 0x840;
+			break;
+		default:
+			break;
+		}
+	}
+
+	data->range_op_max_size -= data->line_size;
+
+	INIT_LIST_HEAD(&data->list);
+	list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */
+
+	/*
+	 * OK, this level has been successfully initialized.  Look for the next
+	 * level cache.  Do not roll back even if the initialization of the
+	 * next level cache fails because we want to continue with available
+	 * cache levels.
+	 */
+	next_np = of_find_next_cache_node(np);
+	if (next_np) {
+		(*cache_level)++;
+		ret = __uniphier_cache_init(next_np, cache_level);
+	}
+	of_node_put(next_np);
+
+	return ret;
+err:
+	iounmap(data->op_base);
+	iounmap(data->rev_base);
+	iounmap(data->ctrl_base);
+	kfree(data);
+
+	return ret;
+}
+
+int __init uniphier_cache_init(void)
+{
+	struct device_node *np = NULL;
+	unsigned int cache_level;
+	int ret = 0;
+
+	/* look for level 2 cache */
+	while ((np = of_find_matching_node(np, uniphier_cache_match)))
+		if (!of_property_read_u32(np, "cache-level", &cache_level) &&
+		    cache_level == 2)
+			break;
+
+	if (!np)
+		return -ENODEV;
+
+	ret = __uniphier_cache_init(np, &cache_level);
+	of_node_put(np);
+
+	if (ret) {
+		/*
+		 * Error out iif L2 initialization fails.  Continue with any
+		 * error on L3 or outer because they are optional.
+		 */
+		if (cache_level == 2) {
+			pr_err("failed to initialize L2 cache\n");
+			return ret;
+		}
+
+		cache_level--;
+		ret = 0;
+	}
+
+	outer_cache.inv_range = uniphier_cache_inv_range;
+	outer_cache.clean_range = uniphier_cache_clean_range;
+	outer_cache.flush_range = uniphier_cache_flush_range;
+	outer_cache.flush_all = uniphier_cache_flush_all;
+	outer_cache.disable = uniphier_cache_disable;
+	outer_cache.sync = uniphier_cache_sync;
+
+	uniphier_cache_enable();
+
+	pr_info("enabled outer cache (cache level: %d)\n", cache_level);
+
+	return ret;
+}
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 845769e41..c8c8b9ed0 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -165,13 +165,28 @@ static void flush_context(unsigned int cpu)
 		__flush_icache_all();
 }
 
-static int is_reserved_asid(u64 asid)
+static bool check_update_reserved_asid(u64 asid, u64 newasid)
 {
 	int cpu;
-	for_each_possible_cpu(cpu)
-		if (per_cpu(reserved_asids, cpu) == asid)
-			return 1;
-	return 0;
+	bool hit = false;
+
+	/*
+	 * Iterate over the set of reserved ASIDs looking for a match.
+	 * If we find one, then we can update our mm to use newasid
+	 * (i.e. the same ASID in the current generation) but we can't
+	 * exit the loop early, since we need to ensure that all copies
+	 * of the old ASID are updated to reflect the mm. Failure to do
+	 * so could result in us missing the reserved ASID in a future
+	 * generation.
+	 */
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(reserved_asids, cpu) == asid) {
+			hit = true;
+			per_cpu(reserved_asids, cpu) = newasid;
+		}
+	}
+
+	return hit;
 }
 
 static u64 new_context(struct mm_struct *mm, unsigned int cpu)
@@ -181,12 +196,14 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 	u64 generation = atomic64_read(&asid_generation);
 
 	if (asid != 0) {
+		u64 newasid = generation | (asid & ~ASID_MASK);
+
 		/*
 		 * If our current ASID was active during a rollover, we
 		 * can continue to use it and this was just a false alarm.
 		 */
-		if (is_reserved_asid(asid))
-			return generation | (asid & ~ASID_MASK);
+		if (check_update_reserved_asid(asid, newasid))
+			return newasid;
 
 		/*
 		 * We had a valid ASID in a previous life, so try to re-use
@@ -194,7 +211,7 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 		 */
 		asid &= ~ASID_MASK;
 		if (!__test_and_set_bit(asid, asid_map))
-			goto bump_gen;
+			return newasid;
 	}
 
 	/*
@@ -216,11 +233,8 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 
 	__set_bit(asid, asid_map);
 	cur_idx = asid;
-
-bump_gen:
-	asid |= generation;
 	cpumask_clear(mm_cpumask(mm));
-	return asid;
+	return asid | generation;
 }
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index cba12f34f..c6834c0cf 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -39,8 +39,62 @@
 #include <asm/system_info.h>
 #include <asm/dma-contiguous.h>
 
+#include "dma.h"
 #include "mm.h"
 
+struct arm_dma_alloc_args {
+	struct device *dev;
+	size_t size;
+	gfp_t gfp;
+	pgprot_t prot;
+	const void *caller;
+	bool want_vaddr;
+	int coherent_flag;
+};
+
+struct arm_dma_free_args {
+	struct device *dev;
+	size_t size;
+	void *cpu_addr;
+	struct page *page;
+	bool want_vaddr;
+};
+
+#define NORMAL	    0
+#define COHERENT    1
+
+struct arm_dma_allocator {
+	void *(*alloc)(struct arm_dma_alloc_args *args,
+		       struct page **ret_page);
+	void (*free)(struct arm_dma_free_args *args);
+};
+
+struct arm_dma_buffer {
+	struct list_head list;
+	void *virt;
+	struct arm_dma_allocator *allocator;
+};
+
+static LIST_HEAD(arm_dma_bufs);
+static DEFINE_SPINLOCK(arm_dma_bufs_lock);
+
+static struct arm_dma_buffer *arm_dma_buffer_find(void *virt)
+{
+	struct arm_dma_buffer *buf, *found = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&arm_dma_bufs_lock, flags);
+	list_for_each_entry(buf, &arm_dma_bufs, list) {
+		if (buf->virt == virt) {
+			list_del(&buf->list);
+			found = buf;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&arm_dma_bufs_lock, flags);
+	return found;
+}
+
 /*
  * The DMA API is built upon the notion of "buffer ownership".  A buffer
  * is either exclusively owned by the CPU (and therefore may be accessed
@@ -74,16 +128,16 @@ static void __dma_page_dev_to_cpu(struct page *, unsigned long,
  */
 static dma_addr_t arm_dma_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir,
-	     struct dma_attrs *attrs)
+	     unsigned long attrs)
 {
-	if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+	if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
 		__dma_page_cpu_to_dev(page, offset, size, dir);
 	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
 }
 
 static dma_addr_t arm_coherent_dma_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir,
-	     struct dma_attrs *attrs)
+	     unsigned long attrs)
 {
 	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
 }
@@ -103,10 +157,9 @@ static dma_addr_t arm_coherent_dma_map_page(struct device *dev, struct page *pag
  * whatever the device wrote there.
  */
 static void arm_dma_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir,
-		struct dma_attrs *attrs)
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
-	if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+	if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
 		__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)),
 				      handle & ~PAGE_MASK, size, dir);
 }
@@ -140,17 +193,16 @@ struct dma_map_ops arm_dma_ops = {
 	.sync_single_for_device	= arm_dma_sync_single_for_device,
 	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
 	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
-	.set_dma_mask		= arm_dma_set_mask,
 };
 EXPORT_SYMBOL(arm_dma_ops);
 
 static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
-	dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs);
+	dma_addr_t *handle, gfp_t gfp, unsigned long attrs);
 static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr,
-				  dma_addr_t handle, struct dma_attrs *attrs);
+				  dma_addr_t handle, unsigned long attrs);
 static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		 struct dma_attrs *attrs);
+		 unsigned long attrs);
 
 struct dma_map_ops arm_coherent_dma_ops = {
 	.alloc			= arm_coherent_dma_alloc,
@@ -159,7 +211,6 @@ struct dma_map_ops arm_coherent_dma_ops = {
 	.get_sgtable		= arm_dma_get_sgtable,
 	.map_page		= arm_coherent_dma_map_page,
 	.map_sg			= arm_dma_map_sg,
-	.set_dma_mask		= arm_dma_set_mask,
 };
 EXPORT_SYMBOL(arm_coherent_dma_ops);
 
@@ -224,7 +275,7 @@ static u64 get_coherent_dma_mask(struct device *dev)
 	return mask;
 }
 
-static void __dma_clear_buffer(struct page *page, size_t size)
+static void __dma_clear_buffer(struct page *page, size_t size, int coherent_flag)
 {
 	/*
 	 * Ensure that the allocated pages are zeroed, and that any data
@@ -236,17 +287,21 @@ static void __dma_clear_buffer(struct page *page, size_t size)
 		while (size > 0) {
 			void *ptr = kmap_atomic(page);
 			memset(ptr, 0, PAGE_SIZE);
-			dmac_flush_range(ptr, ptr + PAGE_SIZE);
+			if (coherent_flag != COHERENT)
+				dmac_flush_range(ptr, ptr + PAGE_SIZE);
 			kunmap_atomic(ptr);
 			page++;
 			size -= PAGE_SIZE;
 		}
-		outer_flush_range(base, end);
+		if (coherent_flag != COHERENT)
+			outer_flush_range(base, end);
 	} else {
 		void *ptr = page_address(page);
 		memset(ptr, 0, size);
-		dmac_flush_range(ptr, ptr + size);
-		outer_flush_range(__pa(ptr), __pa(ptr) + size);
+		if (coherent_flag != COHERENT) {
+			dmac_flush_range(ptr, ptr + size);
+			outer_flush_range(__pa(ptr), __pa(ptr) + size);
+		}
 	}
 }
 
@@ -254,7 +309,8 @@ static void __dma_clear_buffer(struct page *page, size_t size)
  * Allocate a DMA buffer for 'dev' of size 'size' using the
  * specified gfp mask.  Note that 'size' must be page aligned.
  */
-static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
+static struct page *__dma_alloc_buffer(struct device *dev, size_t size,
+				       gfp_t gfp, int coherent_flag)
 {
 	unsigned long order = get_order(size);
 	struct page *page, *p, *e;
@@ -270,7 +326,7 @@ static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gf
 	for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
 		__free_page(p);
 
-	__dma_clear_buffer(page, size);
+	__dma_clear_buffer(page, size, coherent_flag);
 
 	return page;
 }
@@ -292,7 +348,8 @@ static void __dma_free_buffer(struct page *page, size_t size)
 
 static void *__alloc_from_contiguous(struct device *dev, size_t size,
 				     pgprot_t prot, struct page **ret_page,
-				     const void *caller, bool want_vaddr);
+				     const void *caller, bool want_vaddr,
+				     int coherent_flag);
 
 static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp,
 				 pgprot_t prot, struct page **ret_page,
@@ -357,10 +414,13 @@ static int __init atomic_pool_init(void)
 	atomic_pool = gen_pool_create(PAGE_SHIFT, -1);
 	if (!atomic_pool)
 		goto out;
-
+	/*
+	 * The atomic pool is only used for non-coherent allocations
+	 * so we must pass NORMAL for coherent_flag.
+	 */
 	if (dev_get_cma_area(NULL))
 		ptr = __alloc_from_contiguous(NULL, atomic_pool_size, prot,
-					      &page, atomic_pool_init, true);
+				      &page, atomic_pool_init, true, NORMAL);
 	else
 		ptr = __alloc_remap_buffer(NULL, atomic_pool_size, gfp, prot,
 					   &page, atomic_pool_init, true);
@@ -474,7 +534,11 @@ static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp,
 {
 	struct page *page;
 	void *ptr = NULL;
-	page = __dma_alloc_buffer(dev, size, gfp);
+	/*
+	 * __alloc_remap_buffer is only called when the device is
+	 * non-coherent
+	 */
+	page = __dma_alloc_buffer(dev, size, gfp, NORMAL);
 	if (!page)
 		return NULL;
 	if (!want_vaddr)
@@ -529,7 +593,8 @@ static int __free_from_pool(void *start, size_t size)
 
 static void *__alloc_from_contiguous(struct device *dev, size_t size,
 				     pgprot_t prot, struct page **ret_page,
-				     const void *caller, bool want_vaddr)
+				     const void *caller, bool want_vaddr,
+				     int coherent_flag)
 {
 	unsigned long order = get_order(size);
 	size_t count = size >> PAGE_SHIFT;
@@ -540,7 +605,7 @@ static void *__alloc_from_contiguous(struct device *dev, size_t size,
 	if (!page)
 		return NULL;
 
-	__dma_clear_buffer(page, size);
+	__dma_clear_buffer(page, size, coherent_flag);
 
 	if (!want_vaddr)
 		goto out;
@@ -573,11 +638,11 @@ static void __free_from_contiguous(struct device *dev, struct page *page,
 	dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT);
 }
 
-static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot)
+static inline pgprot_t __get_dma_pgprot(unsigned long attrs, pgprot_t prot)
 {
-	prot = dma_get_attr(DMA_ATTR_WRITE_COMBINE, attrs) ?
-			    pgprot_writecombine(prot) :
-			    pgprot_dmacoherent(prot);
+	prot = (attrs & DMA_ATTR_WRITE_COMBINE) ?
+			pgprot_writecombine(prot) :
+			pgprot_dmacoherent(prot);
 	return prot;
 }
 
@@ -590,8 +655,8 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot)
 #define __get_dma_pgprot(attrs, prot)				__pgprot(0)
 #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c, wv)	NULL
 #define __alloc_from_pool(size, ret_page)			NULL
-#define __alloc_from_contiguous(dev, size, prot, ret, c, wv)	NULL
-#define __free_from_pool(cpu_addr, size)			0
+#define __alloc_from_contiguous(dev, size, prot, ret, c, wv, coherent_flag)	NULL
+#define __free_from_pool(cpu_addr, size)			do { } while (0)
 #define __free_from_contiguous(dev, page, cpu_addr, size, wv)	do { } while (0)
 #define __dma_free_remap(cpu_addr, size)			do { } while (0)
 
@@ -601,7 +666,8 @@ static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp,
 				   struct page **ret_page)
 {
 	struct page *page;
-	page = __dma_alloc_buffer(dev, size, gfp);
+	/* __alloc_simple_buffer is only called when the device is coherent */
+	page = __dma_alloc_buffer(dev, size, gfp, COHERENT);
 	if (!page)
 		return NULL;
 
@@ -609,16 +675,97 @@ static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp,
 	return page_address(page);
 }
 
+static void *simple_allocator_alloc(struct arm_dma_alloc_args *args,
+				    struct page **ret_page)
+{
+	return __alloc_simple_buffer(args->dev, args->size, args->gfp,
+				     ret_page);
+}
+
+static void simple_allocator_free(struct arm_dma_free_args *args)
+{
+	__dma_free_buffer(args->page, args->size);
+}
+
+static struct arm_dma_allocator simple_allocator = {
+	.alloc = simple_allocator_alloc,
+	.free = simple_allocator_free,
+};
+
+static void *cma_allocator_alloc(struct arm_dma_alloc_args *args,
+				 struct page **ret_page)
+{
+	return __alloc_from_contiguous(args->dev, args->size, args->prot,
+				       ret_page, args->caller,
+				       args->want_vaddr, args->coherent_flag);
+}
+
+static void cma_allocator_free(struct arm_dma_free_args *args)
+{
+	__free_from_contiguous(args->dev, args->page, args->cpu_addr,
+			       args->size, args->want_vaddr);
+}
+
+static struct arm_dma_allocator cma_allocator = {
+	.alloc = cma_allocator_alloc,
+	.free = cma_allocator_free,
+};
+
+static void *pool_allocator_alloc(struct arm_dma_alloc_args *args,
+				  struct page **ret_page)
+{
+	return __alloc_from_pool(args->size, ret_page);
+}
+
+static void pool_allocator_free(struct arm_dma_free_args *args)
+{
+	__free_from_pool(args->cpu_addr, args->size);
+}
 
+static struct arm_dma_allocator pool_allocator = {
+	.alloc = pool_allocator_alloc,
+	.free = pool_allocator_free,
+};
+
+static void *remap_allocator_alloc(struct arm_dma_alloc_args *args,
+				   struct page **ret_page)
+{
+	return __alloc_remap_buffer(args->dev, args->size, args->gfp,
+				    args->prot, ret_page, args->caller,
+				    args->want_vaddr);
+}
+
+static void remap_allocator_free(struct arm_dma_free_args *args)
+{
+	if (args->want_vaddr)
+		__dma_free_remap(args->cpu_addr, args->size);
+
+	__dma_free_buffer(args->page, args->size);
+}
+
+static struct arm_dma_allocator remap_allocator = {
+	.alloc = remap_allocator_alloc,
+	.free = remap_allocator_free,
+};
 
 static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 			 gfp_t gfp, pgprot_t prot, bool is_coherent,
-			 struct dma_attrs *attrs, const void *caller)
+			 unsigned long attrs, const void *caller)
 {
 	u64 mask = get_coherent_dma_mask(dev);
 	struct page *page = NULL;
 	void *addr;
-	bool want_vaddr;
+	bool allowblock, cma;
+	struct arm_dma_buffer *buf;
+	struct arm_dma_alloc_args args = {
+		.dev = dev,
+		.size = PAGE_ALIGN(size),
+		.gfp = gfp,
+		.prot = prot,
+		.caller = caller,
+		.want_vaddr = ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) == 0),
+		.coherent_flag = is_coherent ? COHERENT : NORMAL,
+	};
 
 #ifdef CONFIG_DMA_API_DEBUG
 	u64 limit = (mask + 1) & ~mask;
@@ -632,6 +779,11 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	if (!mask)
 		return NULL;
 
+	buf = kzalloc(sizeof(*buf),
+		      gfp & ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM));
+	if (!buf)
+		return NULL;
+
 	if (mask < 0xffffffffULL)
 		gfp |= GFP_DMA;
 
@@ -643,24 +795,37 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	 * platform; see CONFIG_HUGETLBFS.
 	 */
 	gfp &= ~(__GFP_COMP);
+	args.gfp = gfp;
 
 	*handle = DMA_ERROR_CODE;
-	size = PAGE_ALIGN(size);
-	want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs);
-
-	if (is_coherent || nommu())
-		addr = __alloc_simple_buffer(dev, size, gfp, &page);
-	else if (!(gfp & __GFP_WAIT))
-		addr = __alloc_from_pool(size, &page);
-	else if (!dev_get_cma_area(dev))
-		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller, want_vaddr);
+	allowblock = gfpflags_allow_blocking(gfp);
+	cma = allowblock ? dev_get_cma_area(dev) : false;
+
+	if (cma)
+		buf->allocator = &cma_allocator;
+	else if (nommu() || is_coherent)
+		buf->allocator = &simple_allocator;
+	else if (allowblock)
+		buf->allocator = &remap_allocator;
 	else
-		addr = __alloc_from_contiguous(dev, size, prot, &page, caller, want_vaddr);
+		buf->allocator = &pool_allocator;
+
+	addr = buf->allocator->alloc(&args, &page);
+
+	if (page) {
+		unsigned long flags;
 
-	if (page)
 		*handle = pfn_to_dma(dev, page_to_pfn(page));
+		buf->virt = args.want_vaddr ? addr : page;
+
+		spin_lock_irqsave(&arm_dma_bufs_lock, flags);
+		list_add(&buf->list, &arm_dma_bufs);
+		spin_unlock_irqrestore(&arm_dma_bufs_lock, flags);
+	} else {
+		kfree(buf);
+	}
 
-	return want_vaddr ? addr : page;
+	return args.want_vaddr ? addr : page;
 }
 
 /*
@@ -668,34 +833,24 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
  * virtual and bus address for that space.
  */
 void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
-		    gfp_t gfp, struct dma_attrs *attrs)
+		    gfp_t gfp, unsigned long attrs)
 {
 	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
-	void *memory;
-
-	if (dma_alloc_from_coherent(dev, size, handle, &memory))
-		return memory;
 
 	return __dma_alloc(dev, size, handle, gfp, prot, false,
 			   attrs, __builtin_return_address(0));
 }
 
 static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
-	dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
+	dma_addr_t *handle, gfp_t gfp, unsigned long attrs)
 {
-	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
-	void *memory;
-
-	if (dma_alloc_from_coherent(dev, size, handle, &memory))
-		return memory;
-
-	return __dma_alloc(dev, size, handle, gfp, prot, true,
+	return __dma_alloc(dev, size, handle, gfp, PAGE_KERNEL, true,
 			   attrs, __builtin_return_address(0));
 }
 
 static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		 struct dma_attrs *attrs)
+		 unsigned long attrs)
 {
 	int ret = -ENXIO;
 #ifdef CONFIG_MMU
@@ -723,14 +878,14 @@ static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
  */
 static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		 struct dma_attrs *attrs)
+		 unsigned long attrs)
 {
 	return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
 }
 
 int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		 struct dma_attrs *attrs)
+		 unsigned long attrs)
 {
 #ifdef CONFIG_MMU
 	vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
@@ -742,49 +897,42 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
  * Free a buffer as defined by the above mapping.
  */
 static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
-			   dma_addr_t handle, struct dma_attrs *attrs,
+			   dma_addr_t handle, unsigned long attrs,
 			   bool is_coherent)
 {
 	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
-	bool want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs);
-
-	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+	struct arm_dma_buffer *buf;
+	struct arm_dma_free_args args = {
+		.dev = dev,
+		.size = PAGE_ALIGN(size),
+		.cpu_addr = cpu_addr,
+		.page = page,
+		.want_vaddr = ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) == 0),
+	};
+
+	buf = arm_dma_buffer_find(cpu_addr);
+	if (WARN(!buf, "Freeing invalid buffer %p\n", cpu_addr))
 		return;
 
-	size = PAGE_ALIGN(size);
-
-	if (is_coherent || nommu()) {
-		__dma_free_buffer(page, size);
-	} else if (__free_from_pool(cpu_addr, size)) {
-		return;
-	} else if (!dev_get_cma_area(dev)) {
-		if (want_vaddr)
-			__dma_free_remap(cpu_addr, size);
-		__dma_free_buffer(page, size);
-	} else {
-		/*
-		 * Non-atomic allocations cannot be freed with IRQs disabled
-		 */
-		WARN_ON(irqs_disabled());
-		__free_from_contiguous(dev, page, cpu_addr, size, want_vaddr);
-	}
+	buf->allocator->free(&args);
+	kfree(buf);
 }
 
 void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
-		  dma_addr_t handle, struct dma_attrs *attrs)
+		  dma_addr_t handle, unsigned long attrs)
 {
 	__arm_dma_free(dev, size, cpu_addr, handle, attrs, false);
 }
 
 static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr,
-				  dma_addr_t handle, struct dma_attrs *attrs)
+				  dma_addr_t handle, unsigned long attrs)
 {
 	__arm_dma_free(dev, size, cpu_addr, handle, attrs, true);
 }
 
 int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
 		 void *cpu_addr, dma_addr_t handle, size_t size,
-		 struct dma_attrs *attrs)
+		 unsigned long attrs)
 {
 	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
 	int ret;
@@ -917,7 +1065,7 @@ static void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
  * here.
  */
 int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir, struct dma_attrs *attrs)
+		enum dma_data_direction dir, unsigned long attrs)
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
 	struct scatterlist *s;
@@ -951,7 +1099,7 @@ int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
  * rules concerning calls here are the same as for dma_unmap_single().
  */
 void arm_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir, struct dma_attrs *attrs)
+		enum dma_data_direction dir, unsigned long attrs)
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
 	struct scatterlist *s;
@@ -1012,16 +1160,6 @@ int dma_supported(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_supported);
 
-int arm_dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
-}
-
 #define PREALLOC_DMA_DEBUG_ENTRIES	4096
 
 static int __init dma_debug_do_init(void)
@@ -1130,13 +1268,18 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping,
 	spin_unlock_irqrestore(&mapping->lock, flags);
 }
 
+/* We'll try 2M, 1M, 64K, and finally 4K; array must end with 0! */
+static const int iommu_order_array[] = { 9, 8, 4, 0 };
+
 static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
-					  gfp_t gfp, struct dma_attrs *attrs)
+					  gfp_t gfp, unsigned long attrs,
+					  int coherent_flag)
 {
 	struct page **pages;
 	int count = size >> PAGE_SHIFT;
 	int array_size = count * sizeof(struct page *);
 	int i = 0;
+	int order_idx = 0;
 
 	if (array_size <= PAGE_SIZE)
 		pages = kzalloc(array_size, GFP_KERNEL);
@@ -1145,7 +1288,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 	if (!pages)
 		return NULL;
 
-	if (dma_get_attr(DMA_ATTR_FORCE_CONTIGUOUS, attrs))
+	if (attrs & DMA_ATTR_FORCE_CONTIGUOUS)
 	{
 		unsigned long order = get_order(size);
 		struct page *page;
@@ -1154,7 +1297,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 		if (!page)
 			goto error;
 
-		__dma_clear_buffer(page, size);
+		__dma_clear_buffer(page, size, coherent_flag);
 
 		for (i = 0; i < count; i++)
 			pages[i] = page + i;
@@ -1162,6 +1305,10 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 		return pages;
 	}
 
+	/* Go straight to 4K chunks if caller says it's OK. */
+	if (attrs & DMA_ATTR_ALLOC_SINGLE_PAGES)
+		order_idx = ARRAY_SIZE(iommu_order_array) - 1;
+
 	/*
 	 * IOMMU can map any pages, so himem can also be used here
 	 */
@@ -1170,22 +1317,24 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 	while (count) {
 		int j, order;
 
-		for (order = __fls(count); order > 0; --order) {
-			/*
-			 * We do not want OOM killer to be invoked as long
-			 * as we can fall back to single pages, so we force
-			 * __GFP_NORETRY for orders higher than zero.
-			 */
-			pages[i] = alloc_pages(gfp | __GFP_NORETRY, order);
-			if (pages[i])
-				break;
+		order = iommu_order_array[order_idx];
+
+		/* Drop down when we get small */
+		if (__fls(count) < order) {
+			order_idx++;
+			continue;
 		}
 
-		if (!pages[i]) {
-			/*
-			 * Fall back to single page allocation.
-			 * Might invoke OOM killer as last resort.
-			 */
+		if (order) {
+			/* See if it's easy to allocate a high-order chunk */
+			pages[i] = alloc_pages(gfp | __GFP_NORETRY, order);
+
+			/* Go down a notch at first sign of pressure */
+			if (!pages[i]) {
+				order_idx++;
+				continue;
+			}
+		} else {
 			pages[i] = alloc_pages(gfp, 0);
 			if (!pages[i])
 				goto error;
@@ -1198,7 +1347,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 				pages[i + j] = pages[i] + j;
 		}
 
-		__dma_clear_buffer(pages[i], PAGE_SIZE << order);
+		__dma_clear_buffer(pages[i], PAGE_SIZE << order, coherent_flag);
 		i += 1 << order;
 		count -= 1 << order;
 	}
@@ -1208,21 +1357,17 @@ error:
 	while (i--)
 		if (pages[i])
 			__free_pages(pages[i], 0);
-	if (array_size <= PAGE_SIZE)
-		kfree(pages);
-	else
-		vfree(pages);
+	kvfree(pages);
 	return NULL;
 }
 
 static int __iommu_free_buffer(struct device *dev, struct page **pages,
-			       size_t size, struct dma_attrs *attrs)
+			       size_t size, unsigned long attrs)
 {
 	int count = size >> PAGE_SHIFT;
-	int array_size = count * sizeof(struct page *);
 	int i;
 
-	if (dma_get_attr(DMA_ATTR_FORCE_CONTIGUOUS, attrs)) {
+	if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) {
 		dma_release_from_contiguous(dev, pages[0], count);
 	} else {
 		for (i = 0; i < count; i++)
@@ -1230,10 +1375,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages,
 				__free_pages(pages[i], 0);
 	}
 
-	if (array_size <= PAGE_SIZE)
-		kfree(pages);
-	else
-		vfree(pages);
+	kvfree(pages);
 	return 0;
 }
 
@@ -1257,7 +1399,7 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size)
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	dma_addr_t dma_addr, iova;
-	int i, ret = DMA_ERROR_CODE;
+	int i;
 
 	dma_addr = __alloc_iova(mapping, size);
 	if (dma_addr == DMA_ERROR_CODE)
@@ -1265,6 +1407,8 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size)
 
 	iova = dma_addr;
 	for (i = 0; i < count; ) {
+		int ret;
+
 		unsigned int next_pfn = page_to_pfn(pages[i]) + 1;
 		phys_addr_t phys = page_to_phys(pages[i]);
 		unsigned int len, j;
@@ -1315,14 +1459,14 @@ static struct page **__atomic_get_pages(void *addr)
 	return (struct page **)page;
 }
 
-static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
+static struct page **__iommu_get_pages(void *cpu_addr, unsigned long attrs)
 {
 	struct vm_struct *area;
 
 	if (__in_atomic_pool(cpu_addr, PAGE_SIZE))
 		return __atomic_get_pages(cpu_addr);
 
-	if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
+	if (attrs & DMA_ATTR_NO_KERNEL_MAPPING)
 		return cpu_addr;
 
 	area = find_vm_area(cpu_addr);
@@ -1331,13 +1475,16 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
 	return NULL;
 }
 
-static void *__iommu_alloc_atomic(struct device *dev, size_t size,
-				  dma_addr_t *handle)
+static void *__iommu_alloc_simple(struct device *dev, size_t size, gfp_t gfp,
+				  dma_addr_t *handle, int coherent_flag)
 {
 	struct page *page;
 	void *addr;
 
-	addr = __alloc_from_pool(size, &page);
+	if (coherent_flag  == COHERENT)
+		addr = __alloc_simple_buffer(dev, size, gfp, &page);
+	else
+		addr = __alloc_from_pool(size, &page);
 	if (!addr)
 		return NULL;
 
@@ -1353,14 +1500,18 @@ err_mapping:
 }
 
 static void __iommu_free_atomic(struct device *dev, void *cpu_addr,
-				dma_addr_t handle, size_t size)
+			dma_addr_t handle, size_t size, int coherent_flag)
 {
 	__iommu_remove_mapping(dev, handle, size);
-	__free_from_pool(cpu_addr, size);
+	if (coherent_flag == COHERENT)
+		__dma_free_buffer(virt_to_page(cpu_addr), size);
+	else
+		__free_from_pool(cpu_addr, size);
 }
 
-static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
-	    dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
+static void *__arm_iommu_alloc_attrs(struct device *dev, size_t size,
+	    dma_addr_t *handle, gfp_t gfp, unsigned long attrs,
+	    int coherent_flag)
 {
 	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
 	struct page **pages;
@@ -1369,8 +1520,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	*handle = DMA_ERROR_CODE;
 	size = PAGE_ALIGN(size);
 
-	if (!(gfp & __GFP_WAIT))
-		return __iommu_alloc_atomic(dev, size, handle);
+	if (coherent_flag  == COHERENT || !gfpflags_allow_blocking(gfp))
+		return __iommu_alloc_simple(dev, size, gfp, handle,
+					    coherent_flag);
 
 	/*
 	 * Following is a work-around (a.k.a. hack) to prevent pages
@@ -1381,7 +1533,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	 */
 	gfp &= ~(__GFP_COMP);
 
-	pages = __iommu_alloc_buffer(dev, size, gfp, attrs);
+	pages = __iommu_alloc_buffer(dev, size, gfp, attrs, coherent_flag);
 	if (!pages)
 		return NULL;
 
@@ -1389,7 +1541,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	if (*handle == DMA_ERROR_CODE)
 		goto err_buffer;
 
-	if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
+	if (attrs & DMA_ATTR_NO_KERNEL_MAPPING)
 		return pages;
 
 	addr = __iommu_alloc_remap(pages, size, gfp, prot,
@@ -1406,19 +1558,36 @@ err_buffer:
 	return NULL;
 }
 
-static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
+static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
+	    dma_addr_t *handle, gfp_t gfp, unsigned long attrs)
+{
+	return __arm_iommu_alloc_attrs(dev, size, handle, gfp, attrs, NORMAL);
+}
+
+static void *arm_coherent_iommu_alloc_attrs(struct device *dev, size_t size,
+		    dma_addr_t *handle, gfp_t gfp, unsigned long attrs)
+{
+	return __arm_iommu_alloc_attrs(dev, size, handle, gfp, attrs, COHERENT);
+}
+
+static int __arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
 		    void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		    struct dma_attrs *attrs)
+		    unsigned long attrs)
 {
 	unsigned long uaddr = vma->vm_start;
 	unsigned long usize = vma->vm_end - vma->vm_start;
 	struct page **pages = __iommu_get_pages(cpu_addr, attrs);
-
-	vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
+	unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	unsigned long off = vma->vm_pgoff;
 
 	if (!pages)
 		return -ENXIO;
 
+	if (off >= nr_pages || (usize >> PAGE_SHIFT) > nr_pages - off)
+		return -ENXIO;
+
+	pages += off;
+
 	do {
 		int ret = vm_insert_page(vma, uaddr, *pages++);
 		if (ret) {
@@ -1431,19 +1600,34 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
 
 	return 0;
 }
+static int arm_iommu_mmap_attrs(struct device *dev,
+		struct vm_area_struct *vma, void *cpu_addr,
+		dma_addr_t dma_addr, size_t size, unsigned long attrs)
+{
+	vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
+
+	return __arm_iommu_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, attrs);
+}
+
+static int arm_coherent_iommu_mmap_attrs(struct device *dev,
+		struct vm_area_struct *vma, void *cpu_addr,
+		dma_addr_t dma_addr, size_t size, unsigned long attrs)
+{
+	return __arm_iommu_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, attrs);
+}
 
 /*
  * free a page as defined by the above mapping.
  * Must not be called with IRQs disabled.
  */
-void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
-			  dma_addr_t handle, struct dma_attrs *attrs)
+void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
+	dma_addr_t handle, unsigned long attrs, int coherent_flag)
 {
 	struct page **pages;
 	size = PAGE_ALIGN(size);
 
-	if (__in_atomic_pool(cpu_addr, size)) {
-		__iommu_free_atomic(dev, cpu_addr, handle, size);
+	if (coherent_flag == COHERENT || __in_atomic_pool(cpu_addr, size)) {
+		__iommu_free_atomic(dev, cpu_addr, handle, size, coherent_flag);
 		return;
 	}
 
@@ -1453,7 +1637,7 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 		return;
 	}
 
-	if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) {
+	if ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) == 0) {
 		dma_common_free_remap(cpu_addr, size,
 			VM_ARM_DMA_CONSISTENT | VM_USERMAP);
 	}
@@ -1462,9 +1646,21 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 	__iommu_free_buffer(dev, pages, size, attrs);
 }
 
+void arm_iommu_free_attrs(struct device *dev, size_t size,
+		    void *cpu_addr, dma_addr_t handle, unsigned long attrs)
+{
+	__arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, NORMAL);
+}
+
+void arm_coherent_iommu_free_attrs(struct device *dev, size_t size,
+		    void *cpu_addr, dma_addr_t handle, unsigned long attrs)
+{
+	__arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, COHERENT);
+}
+
 static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt,
 				 void *cpu_addr, dma_addr_t dma_addr,
-				 size_t size, struct dma_attrs *attrs)
+				 size_t size, unsigned long attrs)
 {
 	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	struct page **pages = __iommu_get_pages(cpu_addr, attrs);
@@ -1502,7 +1698,7 @@ static int __dma_direction_to_prot(enum dma_data_direction dir)
  */
 static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 			  size_t size, dma_addr_t *handle,
-			  enum dma_data_direction dir, struct dma_attrs *attrs,
+			  enum dma_data_direction dir, unsigned long attrs,
 			  bool is_coherent)
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
@@ -1523,8 +1719,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 		phys_addr_t phys = page_to_phys(sg_page(s));
 		unsigned int len = PAGE_ALIGN(s->offset + s->length);
 
-		if (!is_coherent &&
-			!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+		if (!is_coherent && (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
 			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
 
 		prot = __dma_direction_to_prot(dir);
@@ -1545,7 +1740,7 @@ fail:
 }
 
 static int __iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		     enum dma_data_direction dir, struct dma_attrs *attrs,
+		     enum dma_data_direction dir, unsigned long attrs,
 		     bool is_coherent)
 {
 	struct scatterlist *s = sg, *dma = sg, *start = sg;
@@ -1603,7 +1798,7 @@ bad_mapping:
  * obtained via sg_dma_{address,length}.
  */
 int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg,
-		int nents, enum dma_data_direction dir, struct dma_attrs *attrs)
+		int nents, enum dma_data_direction dir, unsigned long attrs)
 {
 	return __iommu_map_sg(dev, sg, nents, dir, attrs, true);
 }
@@ -1621,14 +1816,14 @@ int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg,
  * sg_dma_{address,length}.
  */
 int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg,
-		int nents, enum dma_data_direction dir, struct dma_attrs *attrs)
+		int nents, enum dma_data_direction dir, unsigned long attrs)
 {
 	return __iommu_map_sg(dev, sg, nents, dir, attrs, false);
 }
 
 static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg,
-		int nents, enum dma_data_direction dir, struct dma_attrs *attrs,
-		bool is_coherent)
+		int nents, enum dma_data_direction dir,
+		unsigned long attrs, bool is_coherent)
 {
 	struct scatterlist *s;
 	int i;
@@ -1637,8 +1832,7 @@ static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg,
 		if (sg_dma_len(s))
 			__iommu_remove_mapping(dev, sg_dma_address(s),
 					       sg_dma_len(s));
-		if (!is_coherent &&
-		    !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+		if (!is_coherent && (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
 			__dma_page_dev_to_cpu(sg_page(s), s->offset,
 					      s->length, dir);
 	}
@@ -1655,7 +1849,8 @@ static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg,
  * rules concerning calls here are the same as for dma_unmap_single().
  */
 void arm_coherent_iommu_unmap_sg(struct device *dev, struct scatterlist *sg,
-		int nents, enum dma_data_direction dir, struct dma_attrs *attrs)
+		int nents, enum dma_data_direction dir,
+		unsigned long attrs)
 {
 	__iommu_unmap_sg(dev, sg, nents, dir, attrs, true);
 }
@@ -1671,7 +1866,8 @@ void arm_coherent_iommu_unmap_sg(struct device *dev, struct scatterlist *sg,
  * rules concerning calls here are the same as for dma_unmap_single().
  */
 void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-			enum dma_data_direction dir, struct dma_attrs *attrs)
+			enum dma_data_direction dir,
+			unsigned long attrs)
 {
 	__iommu_unmap_sg(dev, sg, nents, dir, attrs, false);
 }
@@ -1724,7 +1920,7 @@ void arm_iommu_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
  */
 static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir,
-	     struct dma_attrs *attrs)
+	     unsigned long attrs)
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t dma_addr;
@@ -1758,9 +1954,9 @@ fail:
  */
 static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir,
-	     struct dma_attrs *attrs)
+	     unsigned long attrs)
 {
-	if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+	if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
 		__dma_page_cpu_to_dev(page, offset, size, dir);
 
 	return arm_coherent_iommu_map_page(dev, page, offset, size, dir, attrs);
@@ -1776,8 +1972,7 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
  * Coherent IOMMU aware version of arm_dma_unmap_page()
  */
 static void arm_coherent_iommu_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir,
-		struct dma_attrs *attrs)
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t iova = handle & PAGE_MASK;
@@ -1801,8 +1996,7 @@ static void arm_coherent_iommu_unmap_page(struct device *dev, dma_addr_t handle,
  * IOMMU aware version of arm_dma_unmap_page()
  */
 static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir,
-		struct dma_attrs *attrs)
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t iova = handle & PAGE_MASK;
@@ -1813,7 +2007,7 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle,
 	if (!iova)
 		return;
 
-	if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+	if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
 		__dma_page_dev_to_cpu(page, offset, size, dir);
 
 	iommu_unmap(mapping->domain, iova, len);
@@ -1863,14 +2057,12 @@ struct dma_map_ops iommu_ops = {
 	.unmap_sg		= arm_iommu_unmap_sg,
 	.sync_sg_for_cpu	= arm_iommu_sync_sg_for_cpu,
 	.sync_sg_for_device	= arm_iommu_sync_sg_for_device,
-
-	.set_dma_mask		= arm_dma_set_mask,
 };
 
 struct dma_map_ops iommu_coherent_ops = {
-	.alloc		= arm_iommu_alloc_attrs,
-	.free		= arm_iommu_free_attrs,
-	.mmap		= arm_iommu_mmap_attrs,
+	.alloc		= arm_coherent_iommu_alloc_attrs,
+	.free		= arm_coherent_iommu_free_attrs,
+	.mmap		= arm_coherent_iommu_mmap_attrs,
 	.get_sgtable	= arm_iommu_get_sgtable,
 
 	.map_page	= arm_coherent_iommu_map_page,
@@ -1878,8 +2070,6 @@ struct dma_map_ops iommu_coherent_ops = {
 
 	.map_sg		= arm_coherent_iommu_map_sg,
 	.unmap_sg	= arm_coherent_iommu_unmap_sg,
-
-	.set_dma_mask	= arm_dma_set_mask,
 };
 
 /**
@@ -2072,7 +2262,7 @@ static struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent)
 }
 
 static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    struct iommu_ops *iommu)
+				    const struct iommu_ops *iommu)
 {
 	struct dma_iommu_mapping *mapping;
 
@@ -2110,7 +2300,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev)
 #else
 
 static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    struct iommu_ops *iommu)
+				    const struct iommu_ops *iommu)
 {
 	return false;
 }
@@ -2127,7 +2317,7 @@ static struct dma_map_ops *arm_get_dma_map_ops(bool coherent)
 }
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			struct iommu_ops *iommu, bool coherent)
+			const struct iommu_ops *iommu, bool coherent)
 {
 	struct dma_map_ops *dma_ops;
 
diff --git a/arch/arm/mm/dma.h b/arch/arm/mm/dma.h
new file mode 100644
index 000000000..70ea6852f
--- /dev/null
+++ b/arch/arm/mm/dma.h
@@ -0,0 +1,32 @@
+#ifndef DMA_H
+#define DMA_H
+
+#include <asm/glue-cache.h>
+
+#ifndef MULTI_CACHE
+#define dmac_map_area			__glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area 		__glue(_CACHE,_dma_unmap_area)
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+extern void dmac_map_area(const void *, size_t, int);
+extern void dmac_unmap_area(const void *, size_t, int);
+
+#else
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+#define dmac_map_area			cpu_cache.dma_map_area
+#define dmac_unmap_area 		cpu_cache.dma_unmap_area
+
+#endif
+
+#endif
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 0d629b8f9..3a2e678b8 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -243,7 +243,7 @@ good_area:
 		goto out;
 	}
 
-	return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
+	return handle_mm_fault(vma, addr & PAGE_MASK, flags);
 
 check_stack:
 	/* Don't allow expansion below FIRST_USER_ADDRESS */
@@ -346,7 +346,7 @@ retry:
 	up_read(&mm->mmap_sem);
 
 	/*
-	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
+	 * Handle the "normal" case first - VM_FAULT_MAJOR
 	 */
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
@@ -593,6 +593,28 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 	arm_notify_die("", regs, &info, ifsr, 0);
 }
 
+/*
+ * Abort handler to be used only during first unmasking of asynchronous aborts
+ * on the boot CPU. This makes sure that the machine will not die if the
+ * firmware/bootloader left an imprecise abort pending for us to trip over.
+ */
+static int __init early_abort_handler(unsigned long addr, unsigned int fsr,
+				      struct pt_regs *regs)
+{
+	pr_warn("Hit pending asynchronous external abort (FSR=0x%08x) during "
+		"first unmask, this is most likely caused by a "
+		"firmware/bootloader bug.\n", fsr);
+
+	return 0;
+}
+
+void __init early_abt_enable(void)
+{
+	fsr_info[22].fn = early_abort_handler;
+	local_abt_enable();
+	fsr_info[22].fn = do_bad;
+}
+
 #ifndef CONFIG_ARM_LPAE
 static int __init exceptions_init(void)
 {
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index cf08bdfbe..05ec5e0df 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -24,5 +24,6 @@ static inline int fsr_fs(unsigned int fsr)
 
 void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
 unsigned long search_exception_table(unsigned long addr);
+void early_abt_enable(void);
 
 #endif	/* __ARCH_ARM_FAULT_H */
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 34b66af51..3cced8455 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -21,6 +21,21 @@
 
 #include "mm.h"
 
+#ifdef CONFIG_ARM_HEAVY_MB
+void (*soc_mb)(void);
+
+void arm_heavy_mb(void)
+{
+#ifdef CONFIG_OUTER_CACHE_SYNC
+	if (outer_cache.sync)
+		outer_cache.sync();
+#endif
+	if (soc_mb)
+		soc_mb();
+}
+EXPORT_SYMBOL(arm_heavy_mb);
+#endif
+
 #ifdef CONFIG_CPU_CACHE_VIPT
 
 static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
@@ -220,7 +235,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 */
 	if (mapping && cache_is_vipt_aliasing())
 		flush_pfn_alias(page_to_pfn(page),
-				page->index << PAGE_CACHE_SHIFT);
+				page->index << PAGE_SHIFT);
 }
 
 static void __flush_dcache_aliases(struct address_space *mapping, struct page *page)
@@ -235,7 +250,7 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
 	 *   data in the current VM view associated with this page.
 	 * - aliasing VIPT: we only need to find one mapping of this page.
 	 */
-	pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+	pgoff = page->index;
 
 	flush_dcache_mmap_lock(mapping);
 	vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) {
@@ -315,7 +330,7 @@ void flush_dcache_page(struct page *page)
 	mapping = page_mapping(page);
 
 	if (!cache_ops_need_broadcast() &&
-	    mapping && !page_mapped(page))
+	    mapping && !page_mapcount(page))
 		clear_bit(PG_dcache_clean, &page->flags);
 	else {
 		__flush_dcache_page(mapping, page);
@@ -400,18 +415,3 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
 	 */
 	__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
-void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
-			  pmd_t *pmdp)
-{
-	pmd_t pmd = pmd_mksplitting(*pmdp);
-	VM_BUG_ON(address & ~PMD_MASK);
-	set_pmd_at(vma->vm_mm, address, pmdp, pmd);
-
-	/* dummy IPI to serialise against fast_gup */
-	kick_all_cpus_sync();
-}
-#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index ee8dfa793..d02f8187b 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -79,7 +79,7 @@ void *kmap_atomic(struct page *page)
 
 	type = kmap_atomic_idx_push();
 
-	idx = type + KM_TYPE_NR * smp_processor_id();
+	idx = FIX_KMAP_BEGIN + type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
 	/*
@@ -106,7 +106,7 @@ void __kunmap_atomic(void *kvaddr)
 
 	if (kvaddr >= (void *)FIXADDR_START) {
 		type = kmap_atomic_idx();
-		idx = type + KM_TYPE_NR * smp_processor_id();
+		idx = FIX_KMAP_BEGIN + type + KM_TYPE_NR * smp_processor_id();
 
 		if (cache_is_vivt())
 			__cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
@@ -138,7 +138,7 @@ void *kmap_atomic_pfn(unsigned long pfn)
 		return page_address(page);
 
 	type = kmap_atomic_idx_push();
-	idx = type + KM_TYPE_NR * smp_processor_id();
+	idx = FIX_KMAP_BEGIN + type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(get_fixmap_pte(vaddr)));
@@ -147,13 +147,3 @@ void *kmap_atomic_pfn(unsigned long pfn)
 
 	return (void *)vaddr;
 }
-
-struct page *kmap_atomic_to_page(const void *ptr)
-{
-	unsigned long vaddr = (unsigned long)ptr;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	return pte_page(get_fixmap_pte(vaddr));
-}
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index e7a81cebb..c1a48f887 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -15,7 +15,7 @@
  * page tables.
  */
 pgd_t *idmap_pgd;
-phys_addr_t (*arch_virt_to_idmap) (unsigned long x);
+long long arch_phys_to_idmap_offset;
 
 #ifdef CONFIG_ARM_LPAE
 static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
@@ -86,7 +86,7 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start,
 
 	prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
 
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale_family())
 		prot |= PMD_BIT4;
 
 	pgd += pgd_index(addr);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 8a63b4cdc..370581aeb 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -22,6 +22,7 @@
 #include <linux/memblock.h>
 #include <linux/dma-contiguous.h>
 #include <linux/sizes.h>
+#include <linux/stop_machine.h>
 
 #include <asm/cp15.h>
 #include <asm/mach-types.h>
@@ -191,7 +192,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 int pfn_valid(unsigned long pfn)
 {
-	return memblock_is_memory(__pfn_to_phys(pfn));
+	return memblock_is_map_memory(__pfn_to_phys(pfn));
 }
 EXPORT_SYMBOL(pfn_valid);
 #endif
@@ -432,6 +433,9 @@ static void __init free_highpages(void)
 		if (end <= max_low)
 			continue;
 
+		if (memblock_is_nomap(mem))
+			continue;
+
 		/* Truncate partial highmem entries */
 		if (start < max_low)
 			start = max_low;
@@ -568,8 +572,9 @@ void __init mem_init(void)
 	}
 }
 
-#ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
 struct section_perm {
+	const char *name;
 	unsigned long start;
 	unsigned long end;
 	pmdval_t mask;
@@ -577,9 +582,13 @@ struct section_perm {
 	pmdval_t clear;
 };
 
+/* First section-aligned location at or after __start_rodata. */
+extern char __start_rodata_section_aligned[];
+
 static struct section_perm nx_perms[] = {
 	/* Make pages tables, etc before _stext RW (set NX). */
 	{
+		.name	= "pre-text NX",
 		.start	= PAGE_OFFSET,
 		.end	= (unsigned long)_stext,
 		.mask	= ~PMD_SECT_XN,
@@ -587,26 +596,26 @@ static struct section_perm nx_perms[] = {
 	},
 	/* Make init RW (set NX). */
 	{
+		.name	= "init NX",
 		.start	= (unsigned long)__init_begin,
 		.end	= (unsigned long)_sdata,
 		.mask	= ~PMD_SECT_XN,
 		.prot	= PMD_SECT_XN,
 	},
-#ifdef CONFIG_DEBUG_RODATA
 	/* Make rodata NX (set RO in ro_perms below). */
 	{
-		.start  = (unsigned long)__start_rodata,
+		.name	= "rodata NX",
+		.start  = (unsigned long)__start_rodata_section_aligned,
 		.end    = (unsigned long)__init_begin,
 		.mask   = ~PMD_SECT_XN,
 		.prot   = PMD_SECT_XN,
 	},
-#endif
 };
 
-#ifdef CONFIG_DEBUG_RODATA
 static struct section_perm ro_perms[] = {
 	/* Make kernel code and rodata RX (set RO). */
 	{
+		.name	= "text/rodata RO",
 		.start  = (unsigned long)_stext,
 		.end    = (unsigned long)__init_begin,
 #ifdef CONFIG_ARM_LPAE
@@ -619,7 +628,6 @@ static struct section_perm ro_perms[] = {
 #endif
 	},
 };
-#endif
 
 /*
  * Updates section permissions only for the current mm (sections are
@@ -627,12 +635,10 @@ static struct section_perm ro_perms[] = {
  * safe to be called with preemption disabled, as under stop_machine().
  */
 static inline void section_update(unsigned long addr, pmdval_t mask,
-				  pmdval_t prot)
+				  pmdval_t prot, struct mm_struct *mm)
 {
-	struct mm_struct *mm;
 	pmd_t *pmd;
 
-	mm = current->active_mm;
 	pmd = pmd_offset(pud_offset(pgd_offset(mm, addr), addr), addr);
 
 #ifdef CONFIG_ARM_LPAE
@@ -656,55 +662,86 @@ static inline bool arch_has_strict_perms(void)
 	return !!(get_cr() & CR_XP);
 }
 
-#define set_section_perms(perms, field)	{				\
-	size_t i;							\
-	unsigned long addr;						\
-									\
-	if (!arch_has_strict_perms())					\
-		return;							\
-									\
-	for (i = 0; i < ARRAY_SIZE(perms); i++) {			\
-		if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) ||	\
-		    !IS_ALIGNED(perms[i].end, SECTION_SIZE)) {		\
-			pr_err("BUG: section %lx-%lx not aligned to %lx\n", \
-				perms[i].start, perms[i].end,		\
-				SECTION_SIZE);				\
-			continue;					\
-		}							\
-									\
-		for (addr = perms[i].start;				\
-		     addr < perms[i].end;				\
-		     addr += SECTION_SIZE)				\
-			section_update(addr, perms[i].mask,		\
-				       perms[i].field);			\
-	}								\
+void set_section_perms(struct section_perm *perms, int n, bool set,
+			struct mm_struct *mm)
+{
+	size_t i;
+	unsigned long addr;
+
+	if (!arch_has_strict_perms())
+		return;
+
+	for (i = 0; i < n; i++) {
+		if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) ||
+		    !IS_ALIGNED(perms[i].end, SECTION_SIZE)) {
+			pr_err("BUG: %s section %lx-%lx not aligned to %lx\n",
+				perms[i].name, perms[i].start, perms[i].end,
+				SECTION_SIZE);
+			continue;
+		}
+
+		for (addr = perms[i].start;
+		     addr < perms[i].end;
+		     addr += SECTION_SIZE)
+			section_update(addr, perms[i].mask,
+				set ? perms[i].prot : perms[i].clear, mm);
+	}
+
+}
+
+static void update_sections_early(struct section_perm perms[], int n)
+{
+	struct task_struct *t, *s;
+
+	read_lock(&tasklist_lock);
+	for_each_process(t) {
+		if (t->flags & PF_KTHREAD)
+			continue;
+		for_each_thread(t, s)
+			set_section_perms(perms, n, true, s->mm);
+	}
+	read_unlock(&tasklist_lock);
+	set_section_perms(perms, n, true, current->active_mm);
+	set_section_perms(perms, n, true, &init_mm);
 }
 
-static inline void fix_kernmem_perms(void)
+int __fix_kernmem_perms(void *unused)
 {
-	set_section_perms(nx_perms, prot);
+	update_sections_early(nx_perms, ARRAY_SIZE(nx_perms));
+	return 0;
+}
+
+void fix_kernmem_perms(void)
+{
+	stop_machine(__fix_kernmem_perms, NULL, NULL);
+}
+
+int __mark_rodata_ro(void *unused)
+{
+	update_sections_early(ro_perms, ARRAY_SIZE(ro_perms));
+	return 0;
 }
 
-#ifdef CONFIG_DEBUG_RODATA
 void mark_rodata_ro(void)
 {
-	set_section_perms(ro_perms, prot);
+	stop_machine(__mark_rodata_ro, NULL, NULL);
 }
 
 void set_kernel_text_rw(void)
 {
-	set_section_perms(ro_perms, clear);
+	set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), false,
+				current->active_mm);
 }
 
 void set_kernel_text_ro(void)
 {
-	set_section_perms(ro_perms, prot);
+	set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true,
+				current->active_mm);
 }
-#endif /* CONFIG_DEBUG_RODATA */
 
 #else
 static inline void fix_kernmem_perms(void) { }
-#endif /* CONFIG_ARM_KERNMEM_PERMS */
+#endif /* CONFIG_DEBUG_RODATA */
 
 void free_tcmmem(void)
 {
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 0c81056c1..ff0eed23d 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -30,6 +30,7 @@
 #include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/cacheflush.h>
+#include <asm/early_ioremap.h>
 #include <asm/mmu_context.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
@@ -296,9 +297,10 @@ static void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	}
 
 	/*
-	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
+	 * Don't allow RAM to be mapped with mismatched attributes - this
+	 * causes problems with ARMv6+
 	 */
-	if (WARN_ON(pfn_valid(pfn)))
+	if (WARN_ON(pfn_valid(pfn) && mtype != MT_MEMORY_RW))
 		return NULL;
 
 	area = get_vm_area_caller(size, VM_IOREMAP, caller);
@@ -379,11 +381,15 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size)
 EXPORT_SYMBOL(ioremap);
 
 void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size)
+	__alias(ioremap_cached);
+
+void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size)
 {
 	return arch_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED,
 				   __builtin_return_address(0));
 }
 EXPORT_SYMBOL(ioremap_cache);
+EXPORT_SYMBOL(ioremap_cached);
 
 void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size)
 {
@@ -413,6 +419,13 @@ __arm_ioremap_exec(phys_addr_t phys_addr, size_t size, bool cached)
 			__builtin_return_address(0));
 }
 
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
+{
+	return (__force void *)arch_ioremap_caller(phys_addr, size,
+						   MT_MEMORY_RW,
+						   __builtin_return_address(0));
+}
+
 void __iounmap(volatile void __iomem *io_addr)
 {
 	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
@@ -469,3 +482,11 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
 }
 EXPORT_SYMBOL_GPL(pci_ioremap_io);
 #endif
+
+/*
+ * Must be called after early_fixmap_init
+ */
+void __init early_ioremap_init(void)
+{
+	early_ioremap_setup();
+}
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 407dc7865..66353caa3 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -173,8 +173,7 @@ unsigned long arch_mmap_rnd(void)
 {
 	unsigned long rnd;
 
-	/* 8 bits of randomness in 20 address space bits */
-	rnd = (unsigned long)get_random_int() % (1 << 8);
+	rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
 
 	return rnd << PAGE_SHIFT;
 }
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 870838a46..30fe03f95 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -38,6 +38,7 @@
 #include <asm/mach/pci.h>
 #include <asm/fixmap.h>
 
+#include "fault.h"
 #include "mm.h"
 #include "tcm.h"
 
@@ -136,7 +137,7 @@ void __init init_default_cache_policy(unsigned long pmd)
 
 	initial_pmd_value = pmd;
 
-	pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE;
+	pmd &= PMD_SECT_CACHE_MASK;
 
 	for (i = 0; i < ARRAY_SIZE(cache_policies); i++)
 		if (cache_policies[i].pmd == pmd) {
@@ -291,13 +292,13 @@ static struct mem_type mem_types[] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 				L_PTE_RDONLY,
 		.prot_l1   = PMD_TYPE_TABLE,
-		.domain    = DOMAIN_USER,
+		.domain    = DOMAIN_VECTORS,
 	},
 	[MT_HIGH_VECTORS] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 				L_PTE_USER | L_PTE_RDONLY,
 		.prot_l1   = PMD_TYPE_TABLE,
-		.domain    = DOMAIN_USER,
+		.domain    = DOMAIN_VECTORS,
 	},
 	[MT_MEMORY_RWX] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
@@ -357,6 +358,47 @@ const struct mem_type *get_mem_type(unsigned int type)
 }
 EXPORT_SYMBOL(get_mem_type);
 
+static pte_t *(*pte_offset_fixmap)(pmd_t *dir, unsigned long addr);
+
+static pte_t bm_pte[PTRS_PER_PTE + PTE_HWTABLE_PTRS]
+	__aligned(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE) __initdata;
+
+static pte_t * __init pte_offset_early_fixmap(pmd_t *dir, unsigned long addr)
+{
+	return &bm_pte[pte_index(addr)];
+}
+
+static pte_t *pte_offset_late_fixmap(pmd_t *dir, unsigned long addr)
+{
+	return pte_offset_kernel(dir, addr);
+}
+
+static inline pmd_t * __init fixmap_pmd(unsigned long addr)
+{
+	pgd_t *pgd = pgd_offset_k(addr);
+	pud_t *pud = pud_offset(pgd, addr);
+	pmd_t *pmd = pmd_offset(pud, addr);
+
+	return pmd;
+}
+
+void __init early_fixmap_init(void)
+{
+	pmd_t *pmd;
+
+	/*
+	 * The early fixmap range spans multiple pmds, for which
+	 * we are not prepared:
+	 */
+	BUILD_BUG_ON((__fix_to_virt(__end_of_early_ioremap_region) >> PMD_SHIFT)
+		     != FIXADDR_TOP >> PMD_SHIFT);
+
+	pmd = fixmap_pmd(FIXADDR_TOP);
+	pmd_populate_kernel(&init_mm, pmd, bm_pte);
+
+	pte_offset_fixmap = pte_offset_early_fixmap;
+}
+
 /*
  * To avoid TLB flush broadcasts, this uses local_flush_tlb_kernel_range().
  * As a result, this can only be called with preemption disabled, as under
@@ -365,7 +407,7 @@ EXPORT_SYMBOL(get_mem_type);
 void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
 {
 	unsigned long vaddr = __fix_to_virt(idx);
-	pte_t *pte = pte_offset_kernel(pmd_off_k(vaddr), vaddr);
+	pte_t *pte = pte_offset_fixmap(pmd_off_k(vaddr), vaddr);
 
 	/* Make sure fixmap region does not exceed available allocation. */
 	BUILD_BUG_ON(FIXADDR_START + (__end_of_fixed_addresses * PAGE_SIZE) >
@@ -435,7 +477,7 @@ static void __init build_mem_type_table(void)
 	 * "update-able on write" bit on ARM610).  However, Xscale and
 	 * Xscale3 require this bit to be cleared.
 	 */
-	if (cpu_is_xscale() || cpu_is_xsc3()) {
+	if (cpu_is_xscale_family()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			mem_types[i].prot_sect &= ~PMD_BIT4;
 			mem_types[i].prot_l1 &= ~PMD_BIT4;
@@ -530,7 +572,7 @@ static void __init build_mem_type_table(void)
 	 * in the Short-descriptor translation table format descriptors.
 	 */
 	if (cpu_arch == CPU_ARCH_ARMv7 &&
-		(read_cpuid_ext(CPUID_EXT_MMFR0) & 0xF) == 4) {
+		(read_cpuid_ext(CPUID_EXT_MMFR0) & 0xF) >= 4) {
 		user_pmd_table |= PMD_PXNTABLE;
 	}
 #endif
@@ -682,30 +724,50 @@ static void __init *early_alloc(unsigned long sz)
 	return early_alloc_aligned(sz, sz);
 }
 
-static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
+static void *__init late_alloc(unsigned long sz)
+{
+	void *ptr = (void *)__get_free_pages(PGALLOC_GFP, get_order(sz));
+
+	if (!ptr || !pgtable_page_ctor(virt_to_page(ptr)))
+		BUG();
+	return ptr;
+}
+
+static pte_t * __init arm_pte_alloc(pmd_t *pmd, unsigned long addr,
+				unsigned long prot,
+				void *(*alloc)(unsigned long sz))
 {
 	if (pmd_none(*pmd)) {
-		pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
+		pte_t *pte = alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
 		__pmd_populate(pmd, __pa(pte), prot);
 	}
 	BUG_ON(pmd_bad(*pmd));
 	return pte_offset_kernel(pmd, addr);
 }
 
+static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
+				      unsigned long prot)
+{
+	return arm_pte_alloc(pmd, addr, prot, early_alloc);
+}
+
 static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 				  unsigned long end, unsigned long pfn,
-				  const struct mem_type *type)
+				  const struct mem_type *type,
+				  void *(*alloc)(unsigned long sz),
+				  bool ng)
 {
-	pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
+	pte_t *pte = arm_pte_alloc(pmd, addr, type->prot_l1, alloc);
 	do {
-		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
+		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)),
+			    ng ? PTE_EXT_NG : 0);
 		pfn++;
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
 
 static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
 			unsigned long end, phys_addr_t phys,
-			const struct mem_type *type)
+			const struct mem_type *type, bool ng)
 {
 	pmd_t *p = pmd;
 
@@ -723,7 +785,7 @@ static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
 		pmd++;
 #endif
 	do {
-		*pmd = __pmd(phys | type->prot_sect);
+		*pmd = __pmd(phys | type->prot_sect | (ng ? PMD_SECT_nG : 0));
 		phys += SECTION_SIZE;
 	} while (pmd++, addr += SECTION_SIZE, addr != end);
 
@@ -732,7 +794,8 @@ static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
 
 static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 				      unsigned long end, phys_addr_t phys,
-				      const struct mem_type *type)
+				      const struct mem_type *type,
+				      void *(*alloc)(unsigned long sz), bool ng)
 {
 	pmd_t *pmd = pmd_offset(pud, addr);
 	unsigned long next;
@@ -750,10 +813,10 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 		 */
 		if (type->prot_sect &&
 				((addr | next | phys) & ~SECTION_MASK) == 0) {
-			__map_init_section(pmd, addr, next, phys, type);
+			__map_init_section(pmd, addr, next, phys, type, ng);
 		} else {
 			alloc_init_pte(pmd, addr, next,
-						__phys_to_pfn(phys), type);
+				       __phys_to_pfn(phys), type, alloc, ng);
 		}
 
 		phys += next - addr;
@@ -763,21 +826,24 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 
 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 				  unsigned long end, phys_addr_t phys,
-				  const struct mem_type *type)
+				  const struct mem_type *type,
+				  void *(*alloc)(unsigned long sz), bool ng)
 {
 	pud_t *pud = pud_offset(pgd, addr);
 	unsigned long next;
 
 	do {
 		next = pud_addr_end(addr, end);
-		alloc_init_pmd(pud, addr, next, phys, type);
+		alloc_init_pmd(pud, addr, next, phys, type, alloc, ng);
 		phys += next - addr;
 	} while (pud++, addr = next, addr != end);
 }
 
 #ifndef CONFIG_ARM_LPAE
-static void __init create_36bit_mapping(struct map_desc *md,
-					const struct mem_type *type)
+static void __init create_36bit_mapping(struct mm_struct *mm,
+					struct map_desc *md,
+					const struct mem_type *type,
+					bool ng)
 {
 	unsigned long addr, length, end;
 	phys_addr_t phys;
@@ -817,7 +883,7 @@ static void __init create_36bit_mapping(struct map_desc *md,
 	 */
 	phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
 
-	pgd = pgd_offset_k(addr);
+	pgd = pgd_offset(mm, addr);
 	end = addr + length;
 	do {
 		pud_t *pud = pud_offset(pgd, addr);
@@ -825,7 +891,8 @@ static void __init create_36bit_mapping(struct map_desc *md,
 		int i;
 
 		for (i = 0; i < 16; i++)
-			*pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER);
+			*pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER |
+				       (ng ? PMD_SECT_nG : 0));
 
 		addr += SUPERSECTION_SIZE;
 		phys += SUPERSECTION_SIZE;
@@ -834,33 +901,15 @@ static void __init create_36bit_mapping(struct map_desc *md,
 }
 #endif	/* !CONFIG_ARM_LPAE */
 
-/*
- * Create the page directory entries and any necessary
- * page tables for the mapping specified by `md'.  We
- * are able to cope here with varying sizes and address
- * offsets, and we take full advantage of sections and
- * supersections.
- */
-static void __init create_mapping(struct map_desc *md)
+static void __init __create_mapping(struct mm_struct *mm, struct map_desc *md,
+				    void *(*alloc)(unsigned long sz),
+				    bool ng)
 {
 	unsigned long addr, length, end;
 	phys_addr_t phys;
 	const struct mem_type *type;
 	pgd_t *pgd;
 
-	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
-		pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n",
-			(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
-		return;
-	}
-
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
-	    md->virtual >= PAGE_OFFSET &&
-	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
-		pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
-			(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
-	}
-
 	type = &mem_types[md->type];
 
 #ifndef CONFIG_ARM_LPAE
@@ -868,7 +917,7 @@ static void __init create_mapping(struct map_desc *md)
 	 * Catch 36-bit addresses
 	 */
 	if (md->pfn >= 0x100000) {
-		create_36bit_mapping(md, type);
+		create_36bit_mapping(mm, md, type, ng);
 		return;
 	}
 #endif
@@ -883,12 +932,12 @@ static void __init create_mapping(struct map_desc *md)
 		return;
 	}
 
-	pgd = pgd_offset_k(addr);
+	pgd = pgd_offset(mm, addr);
 	end = addr + length;
 	do {
 		unsigned long next = pgd_addr_end(addr, end);
 
-		alloc_init_pud(pgd, addr, next, phys, type);
+		alloc_init_pud(pgd, addr, next, phys, type, alloc, ng);
 
 		phys += next - addr;
 		addr = next;
@@ -896,6 +945,43 @@ static void __init create_mapping(struct map_desc *md)
 }
 
 /*
+ * Create the page directory entries and any necessary
+ * page tables for the mapping specified by `md'.  We
+ * are able to cope here with varying sizes and address
+ * offsets, and we take full advantage of sections and
+ * supersections.
+ */
+static void __init create_mapping(struct map_desc *md)
+{
+	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
+		pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n",
+			(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
+		return;
+	}
+
+	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+	    md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
+	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
+		pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
+			(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
+	}
+
+	__create_mapping(&init_mm, md, early_alloc, false);
+}
+
+void __init create_mapping_late(struct mm_struct *mm, struct map_desc *md,
+				bool ng)
+{
+#ifdef CONFIG_ARM_LPAE
+	pud_t *pud = pud_alloc(mm, pgd_offset(mm, md->virtual), md->virtual);
+	if (WARN_ON(!pud))
+		return;
+	pmd_alloc(mm, pud, 0);
+#endif
+	__create_mapping(mm, md, late_alloc, ng);
+}
+
+/*
  * Create the architecture specific mappings
  */
 void __init iotable_init(struct map_desc *io_desc, int nr)
@@ -1070,10 +1156,19 @@ void __init sanity_check_meminfo(void)
 {
 	phys_addr_t memblock_limit = 0;
 	int highmem = 0;
-	phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
+	u64 vmalloc_limit;
 	struct memblock_region *reg;
 	bool should_use_highmem = false;
 
+	/*
+	 * Let's use our own (unoptimized) equivalent of __pa() that is
+	 * not affected by wrap-arounds when sizeof(phys_addr_t) == 4.
+	 * The result is used as the upper bound on physical memory address
+	 * and may itself be outside the valid range for which phys_addr_t
+	 * and therefore __pa() is defined.
+	 */
+	vmalloc_limit = (u64)(uintptr_t)vmalloc_min - PAGE_OFFSET + PHYS_OFFSET;
+
 	for_each_memblock(memory, reg) {
 		phys_addr_t block_start = reg->base;
 		phys_addr_t block_end = reg->base + reg->size;
@@ -1098,10 +1193,11 @@ void __init sanity_check_meminfo(void)
 			if (reg->size > size_limit) {
 				phys_addr_t overlap_size = reg->size - size_limit;
 
-				pr_notice("Truncating RAM at %pa-%pa to -%pa",
-					  &block_start, &block_end, &vmalloc_limit);
-				memblock_remove(vmalloc_limit, overlap_size);
+				pr_notice("Truncating RAM at %pa-%pa",
+					  &block_start, &block_end);
 				block_end = vmalloc_limit;
+				pr_cont(" to -%pa", &block_end);
+				memblock_remove(vmalloc_limit, overlap_size);
 				should_use_highmem = true;
 			}
 		}
@@ -1168,7 +1264,7 @@ static inline void prepare_page_table(void)
 
 #ifdef CONFIG_XIP_KERNEL
 	/* The XIP kernel is mapped in the module area -- skip over it */
-	addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
+	addr = ((unsigned long)_exiprom + PMD_SIZE - 1) & PMD_MASK;
 #endif
 	for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -1219,10 +1315,10 @@ void __init arm_mm_memblock_reserve(void)
 
 /*
  * Set up the device mappings.  Since we clear out the page tables for all
- * mappings above VMALLOC_START, we will remove any debug device mappings.
- * This means you have to be careful how you debug this function, or any
- * called function.  This means you can't use any function or debugging
- * method which may touch any device, otherwise the kernel _will_ crash.
+ * mappings above VMALLOC_START, except early fixmap, we might remove debug
+ * device mappings.  This means earlycon can be used to debug this function
+ * Any other function or debugging method which may touch any device _will_
+ * crash the kernel.
  */
 static void __init devicemaps_init(const struct machine_desc *mdesc)
 {
@@ -1237,7 +1333,10 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 
 	early_trap_init(vectors);
 
-	for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
+	/*
+	 * Clear page table except top pmd used by early fixmaps
+	 */
+	for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
 	/*
@@ -1247,7 +1346,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 #ifdef CONFIG_XIP_KERNEL
 	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
 	map.virtual = MODULES_VADDR;
-	map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+	map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK;
 	map.type = MT_ROM;
 	create_mapping(&map);
 #endif
@@ -1319,6 +1418,9 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 	 */
 	local_flush_tlb_all();
 	flush_cache_all();
+
+	/* Enable asynchronous aborts */
+	early_abt_enable();
 }
 
 static void __init kmap_init(void)
@@ -1335,7 +1437,11 @@ static void __init kmap_init(void)
 static void __init map_lowmem(void)
 {
 	struct memblock_region *reg;
+#ifdef CONFIG_XIP_KERNEL
+	phys_addr_t kernel_x_start = round_down(__pa(_sdata), SECTION_SIZE);
+#else
 	phys_addr_t kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
+#endif
 	phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
 
 	/* Map all the lowmem memory banks. */
@@ -1344,6 +1450,9 @@ static void __init map_lowmem(void)
 		phys_addr_t end = start + reg->size;
 		struct map_desc map;
 
+		if (memblock_is_nomap(reg))
+			continue;
+
 		if (end > arm_lowmem_limit)
 			end = arm_lowmem_limit;
 		if (start >= end)
@@ -1489,6 +1598,35 @@ void __init early_paging_init(const struct machine_desc *mdesc)
 
 #endif
 
+static void __init early_fixmap_shutdown(void)
+{
+	int i;
+	unsigned long va = fix_to_virt(__end_of_permanent_fixed_addresses - 1);
+
+	pte_offset_fixmap = pte_offset_late_fixmap;
+	pmd_clear(fixmap_pmd(va));
+	local_flush_tlb_kernel_page(va);
+
+	for (i = 0; i < __end_of_permanent_fixed_addresses; i++) {
+		pte_t *pte;
+		struct map_desc map;
+
+		map.virtual = fix_to_virt(i);
+		pte = pte_offset_early_fixmap(pmd_off_k(map.virtual), map.virtual);
+
+		/* Only i/o device mappings are supported ATM */
+		if (pte_none(*pte) ||
+		    (pte_val(*pte) & L_PTE_MT_MASK) != L_PTE_MT_DEV_SHARED)
+			continue;
+
+		map.pfn = pte_pfn(*pte);
+		map.type = MT_DEVICE;
+		map.length = PAGE_SIZE;
+
+		create_mapping(&map);
+	}
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
@@ -1502,6 +1640,7 @@ void __init paging_init(const struct machine_desc *mdesc)
 	map_lowmem();
 	memblock_set_current_limit(arm_lowmem_limit);
 	dma_contiguous_remap();
+	early_fixmap_shutdown();
 	devicemaps_init(mdesc);
 	kmap_init();
 	tcm_init();
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 1dd10936d..274096772 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -87,7 +87,6 @@ static unsigned long irbar_read(void)
 /* MPU initialisation functions */
 void __init sanity_check_meminfo_mpu(void)
 {
-	int i;
 	phys_addr_t phys_offset = PHYS_OFFSET;
 	phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
 	struct memblock_region *reg;
@@ -110,11 +109,13 @@ void __init sanity_check_meminfo_mpu(void)
 		} else {
 			/*
 			 * memblock auto merges contiguous blocks, remove
-			 * all blocks afterwards
+			 * all blocks afterwards in one go (we can't remove
+			 * blocks separately while iterating)
 			 */
 			pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
-				  &mem_start, &reg->base);
-			memblock_remove(reg->base, reg->size);
+				  &mem_end, &reg->base);
+			memblock_remove(reg->base, 0 - reg->base);
+			break;
 		}
 	}
 
@@ -144,7 +145,7 @@ void __init sanity_check_meminfo_mpu(void)
 		pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",
 				&specified_mem_size, &aligned_region_size);
 		memblock_remove(mem_start + aligned_region_size,
-				specified_mem_size - aligned_round_size);
+				specified_mem_size - aligned_region_size);
 
 		mem_end = mem_start + aligned_region_size;
 	}
@@ -261,7 +262,7 @@ void __init mpu_setup(void)
 		return;
 
 	region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET,
-					ilog2(meminfo.bank[0].size),
+					ilog2(memblock.memory.regions[0].size),
 					MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
 	if (region_err) {
 		panic("MPU region initialization failure! %d", region_err);
@@ -285,7 +286,7 @@ void __init arm_mm_memblock_reserve(void)
 	 * some architectures which the DRAM is the exception vector to trap,
 	 * alloc_page breaks with error, although it is not NULL, but "0."
 	 */
-	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
+	memblock_reserve(CONFIG_VECTORS_BASE, 2 * PAGE_SIZE);
 #else /* ifndef CONFIG_CPU_V7M */
 	/*
 	 * There is no dedicated vector page on V7-M. So nothing needs to be
@@ -367,11 +368,15 @@ void __iomem *ioremap(resource_size_t res_cookie, size_t size)
 EXPORT_SYMBOL(ioremap);
 
 void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size)
+	__alias(ioremap_cached);
+
+void __iomem *ioremap_cached(resource_size_t res_cookie, size_t size)
 {
 	return __arm_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED,
 				    __builtin_return_address(0));
 }
 EXPORT_SYMBOL(ioremap_cache);
+EXPORT_SYMBOL(ioremap_cached);
 
 void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size)
 {
@@ -380,6 +385,11 @@ void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size)
 }
 EXPORT_SYMBOL(ioremap_wc);
 
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
+{
+	return (void *)phys_addr;
+}
+
 void __iounmap(volatile void __iomem *addr)
 {
 }
diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c
index cf30daff8..d19b1ad29 100644
--- a/arch/arm/mm/pageattr.c
+++ b/arch/arm/mm/pageattr.c
@@ -49,6 +49,9 @@ static int change_memory_common(unsigned long addr, int numpages,
 		WARN_ON_ONCE(1);
 	}
 
+	if (!numpages)
+		return 0;
+
 	if (start < MODULES_VADDR || start >= MODULES_END)
 		return -EINVAL;
 
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index a3681f11d..c1c1a5c67 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -23,7 +23,7 @@
 #define __pgd_alloc()	kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL)
 #define __pgd_free(pgd)	kfree(pgd)
 #else
-#define __pgd_alloc()	(pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_REPEAT, 2)
+#define __pgd_alloc()	(pgd_t *)__get_free_pages(GFP_KERNEL, 2)
 #define __pgd_free(pgd)	free_pages((unsigned long)pgd, 2)
 #endif
 
@@ -80,10 +80,20 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 		if (!new_pmd)
 			goto no_pmd;
 
-		new_pte = pte_alloc_map(mm, NULL, new_pmd, 0);
+		new_pte = pte_alloc_map(mm, new_pmd, 0);
 		if (!new_pte)
 			goto no_pte;
 
+#ifndef CONFIG_ARM_LPAE
+		/*
+		 * Modify the PTE pointer to have the correct domain.  This
+		 * needs to be the vectors domain to avoid the low vectors
+		 * being unmapped.
+		 */
+		pmd_val(*new_pmd) &= ~PMD_DOMAIN_MASK;
+		pmd_val(*new_pmd) |= PMD_DOMAIN(DOMAIN_VECTORS);
+#endif
+
 		init_pud = pud_offset(init_pgd, 0);
 		init_pmd = pmd_offset(init_pud, 0);
 		init_pte = pte_offset_map(init_pmd, 0);
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index d65edf717..6f07d2ef4 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -342,11 +342,13 @@ ENTRY(cpu_mohawk_switch_mm)
  */
 	.align	5
 ENTRY(cpu_mohawk_set_pte_ext)
+#ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+#endif
 
 .globl	cpu_mohawk_suspend_size
 .equ	cpu_mohawk_suspend_size, 4 * 6
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index de2b246fe..d00d52c9d 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -16,6 +16,7 @@
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
+#include <asm/memory.h>
 
 #include "proc-macros.S"
 
@@ -95,7 +96,7 @@ ENDPROC(cpu_v7_dcache_clean_area)
 .equ	cpu_v7_suspend_size, 4 * 9
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_v7_do_suspend)
-	stmfd	sp!, {r4 - r10, lr}
+	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mrc	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
 	stmia	r0!, {r4 - r5}
@@ -112,7 +113,7 @@ ENTRY(cpu_v7_do_suspend)
 	mrc	p15, 0, r9, c1, c0, 1	@ Auxiliary control register
 	mrc	p15, 0, r10, c1, c0, 2	@ Co-processor access control
 	stmia	r0, {r5 - r11}
-	ldmfd	sp!, {r4 - r10, pc}
+	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_v7_do_suspend)
 
 ENTRY(cpu_v7_do_resume)
@@ -274,17 +275,19 @@ __v7_ca15mp_setup:
 __v7_b15mp_setup:
 __v7_ca17mp_setup:
 	mov	r10, #0
-1:	adr	r12, __v7_setup_stack		@ the local stack
-	stmia	r12, {r0-r5, lr}		@ v7_invalidate_l1 touches r0-r6
+1:	adr	r0, __v7_setup_stack_ptr
+	ldr	r12, [r0]
+	add	r12, r12, r0			@ the local stack
+	stmia	r12, {r1-r6, lr}		@ v7_invalidate_l1 touches r0-r6
 	bl      v7_invalidate_l1
-	ldmia	r12, {r0-r5, lr}
+	ldmia	r12, {r1-r6, lr}
 #ifdef CONFIG_SMP
+	orr	r10, r10, #(1 << 6)		@ Enable SMP/nAMP mode
 	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)
-	ALT_UP(mov	r0, #(1 << 6))		@ fake it for UP
-	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
-	orreq	r0, r0, #(1 << 6)		@ Enable SMP/nAMP mode
-	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
-	mcreq	p15, 0, r0, c1, c0, 1
+	ALT_UP(mov	r0, r10)		@ fake it for UP
+	orr	r10, r10, r0			@ Set required bits
+	teq	r10, r0				@ Were they already set?
+	mcrne	p15, 0, r10, c1, c0, 1		@ No, update register
 #endif
 	b	__v7_setup_cont
 
@@ -360,6 +363,39 @@ __ca15_errata:
 #endif
 	b	__errata_finish
 
+__ca12_errata:
+#ifdef CONFIG_ARM_ERRATA_818325_852422
+	mrc	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orr	r10, r10, #1 << 12		@ set bit #12
+	mcr	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_821420
+	mrc	p15, 0, r10, c15, c0, 2		@ read internal feature reg
+	orr	r10, r10, #1 << 1		@ set bit #1
+	mcr	p15, 0, r10, c15, c0, 2		@ write internal feature reg
+#endif
+#ifdef CONFIG_ARM_ERRATA_825619
+	mrc	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orr	r10, r10, #1 << 24		@ set bit #24
+	mcr	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
+	b	__errata_finish
+
+__ca17_errata:
+#ifdef CONFIG_ARM_ERRATA_852421
+	cmp	r6, #0x12			@ only present up to r1p2
+	mrcle	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orrle	r10, r10, #1 << 24		@ set bit #24
+	mcrle	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_852423
+	cmp	r6, #0x12			@ only present up to r1p2
+	mrcle	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orrle	r10, r10, #1 << 12		@ set bit #12
+	mcrle	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
+	b	__errata_finish
+
 __v7_pj4b_setup:
 #ifdef CONFIG_CPU_PJ4B
 
@@ -415,10 +451,12 @@ __v7_pj4b_setup:
 #endif /* CONFIG_CPU_PJ4B */
 
 __v7_setup:
-	adr	r12, __v7_setup_stack		@ the local stack
-	stmia	r12, {r0-r5, lr}		@ v7_invalidate_l1 touches r0-r6
+	adr	r0, __v7_setup_stack_ptr
+	ldr	r12, [r0]
+	add	r12, r12, r0			@ the local stack
+	stmia	r12, {r1-r6, lr}		@ v7_invalidate_l1 touches r0-r6
 	bl      v7_invalidate_l1
-	ldmia	r12, {r0-r5, lr}
+	ldmia	r12, {r1-r6, lr}
 
 __v7_setup_cont:
 	and	r0, r9, #0xff000000		@ ARM?
@@ -439,6 +477,16 @@ __v7_setup_cont:
 	teq	r0, r10
 	beq	__ca9_errata
 
+	/* Cortex-A12 Errata */
+	ldr	r10, =0x00000c0d		@ Cortex-A12 primary part number
+	teq	r0, r10
+	beq	__ca12_errata
+
+	/* Cortex-A17 Errata */
+	ldr	r10, =0x00000c0e		@ Cortex-A17 primary part number
+	teq	r0, r10
+	beq	__ca17_errata
+
 	/* Cortex-A15 Errata */
 	ldr	r10, =0x00000c0f		@ Cortex-A15 primary part number
 	teq	r0, r10
@@ -480,11 +528,16 @@ __errata_finish:
 	orr	r0, r0, r6			@ set them
  THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
 	ret	lr				@ return to head.S:__ret
+
+	.align	2
+__v7_setup_stack_ptr:
+	.word	PHYS_RELATIVE(__v7_setup_stack, .)
 ENDPROC(__v7_setup)
 
+	.bss
 	.align	2
 __v7_setup_stack:
-	.space	4 * 7				@ 12 registers
+	.space	4 * 7				@ 7 registers
 
 	__INITDATA
 
diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
index 67d920907..7229d8d0b 100644
--- a/arch/arm/mm/proc-v7m.S
+++ b/arch/arm/mm/proc-v7m.S
@@ -12,6 +12,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/memory.h>
 #include <asm/v7m.h>
 #include "proc-macros.S"
 
@@ -97,19 +98,19 @@ __v7m_setup:
 	mov	r5, #0x00800000
 	str	r5, [r0, V7M_SCB_SHPR3]	@ set PendSV priority
 
-	@ SVC to run the kernel in this mode
+	@ SVC to switch to handler mode. Notice that this requires sp to
+	@ point to writeable memory because the processor saves
+	@ some registers to the stack.
 	badr	r1, 1f
 	ldr	r5, [r12, #11 * 4]	@ read the SVC vector entry
 	str	r1, [r12, #11 * 4]	@ write the temporary SVC vector entry
 	mov	r6, lr			@ save LR
-	mov	r7, sp			@ save SP
-	ldr	sp, =__v7m_setup_stack_top
+	ldr	sp, =init_thread_union + THREAD_START_SP
 	cpsie	i
 	svc	#0
 1:	cpsid	i
 	str	r5, [r12, #11 * 4]	@ restore the original SVC vector entry
 	mov	lr, r6			@ restore LR
-	mov	sp, r7			@ restore SP
 
 	@ Special-purpose control register
 	mov	r1, #1
@@ -123,11 +124,6 @@ __v7m_setup:
 	ret	lr
 ENDPROC(__v7m_setup)
 
-	.align 2
-__v7m_setup_stack:
-	.space	4 * 8				@ 8 registers
-__v7m_setup_stack_top:
-
 	define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
 
 	.section ".rodata"
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index c011e2296..93d0b6d0b 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -125,7 +125,7 @@ static u64 jit_get_skb_w(struct sk_buff *skb, int offset)
 }
 
 /*
- * Wrapper that handles both OABI and EABI and assures Thumb2 interworking
+ * Wrappers which handle both OABI and EABI and assures Thumb2 interworking
  * (where the assembly routines like __aeabi_uidiv could cause problems).
  */
 static u32 jit_udiv(u32 dividend, u32 divisor)
@@ -133,6 +133,11 @@ static u32 jit_udiv(u32 dividend, u32 divisor)
 	return dividend / divisor;
 }
 
+static u32 jit_mod(u32 dividend, u32 divisor)
+{
+	return dividend % divisor;
+}
+
 static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx)
 {
 	inst |= (cond << 28);
@@ -182,19 +187,6 @@ static inline int mem_words_used(struct jit_ctx *ctx)
 	return fls(ctx->seen & SEEN_MEM);
 }
 
-static inline bool is_load_to_a(u16 inst)
-{
-	switch (inst) {
-	case BPF_LD | BPF_W | BPF_LEN:
-	case BPF_LD | BPF_W | BPF_ABS:
-	case BPF_LD | BPF_H | BPF_ABS:
-	case BPF_LD | BPF_B | BPF_ABS:
-		return true;
-	default:
-		return false;
-	}
-}
-
 static void jit_fill_hole(void *area, unsigned int size)
 {
 	u32 *ptr;
@@ -206,7 +198,6 @@ static void jit_fill_hole(void *area, unsigned int size)
 static void build_prologue(struct jit_ctx *ctx)
 {
 	u16 reg_set = saved_regs(ctx);
-	u16 first_inst = ctx->skf->insns[0].code;
 	u16 off;
 
 #ifdef CONFIG_FRAME_POINTER
@@ -236,7 +227,7 @@ static void build_prologue(struct jit_ctx *ctx)
 		emit(ARM_MOV_I(r_X, 0), ctx);
 
 	/* do not leak kernel data to userspace */
-	if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst)))
+	if (bpf_needs_clear_a(&ctx->skf->insns[0]))
 		emit(ARM_MOV_I(r_A, 0), ctx);
 
 	/* stack space for the BPF_MEM words */
@@ -471,11 +462,17 @@ static inline void emit_blx_r(u8 tgt_reg, struct jit_ctx *ctx)
 #endif
 }
 
-static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx)
+static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx,
+				int bpf_op)
 {
 #if __LINUX_ARM_ARCH__ == 7
 	if (elf_hwcap & HWCAP_IDIVA) {
-		emit(ARM_UDIV(rd, rm, rn), ctx);
+		if (bpf_op == BPF_DIV)
+			emit(ARM_UDIV(rd, rm, rn), ctx);
+		else {
+			emit(ARM_UDIV(ARM_R3, rm, rn), ctx);
+			emit(ARM_MLS(rd, rn, ARM_R3, rm), ctx);
+		}
 		return;
 	}
 #endif
@@ -496,7 +493,8 @@ static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx)
 		emit(ARM_MOV_R(ARM_R0, rm), ctx);
 
 	ctx->seen |= SEEN_CALL;
-	emit_mov_i(ARM_R3, (u32)jit_udiv, ctx);
+	emit_mov_i(ARM_R3, bpf_op == BPF_DIV ? (u32)jit_udiv : (u32)jit_mod,
+		   ctx);
 	emit_blx_r(ARM_R3, ctx);
 
 	if (rd != ARM_R0)
@@ -614,6 +612,7 @@ load_common:
 		case BPF_LD | BPF_B | BPF_IND:
 			load_order = 0;
 load_ind:
+			update_on_xread(ctx);
 			OP_IMM3(ARM_ADD, r_off, r_X, k, ctx);
 			goto load_common;
 		case BPF_LDX | BPF_IMM:
@@ -697,13 +696,27 @@ load_ind:
 			if (k == 1)
 				break;
 			emit_mov_i(r_scratch, k, ctx);
-			emit_udiv(r_A, r_A, r_scratch, ctx);
+			emit_udivmod(r_A, r_A, r_scratch, ctx, BPF_DIV);
 			break;
 		case BPF_ALU | BPF_DIV | BPF_X:
 			update_on_xread(ctx);
 			emit(ARM_CMP_I(r_X, 0), ctx);
 			emit_err_ret(ARM_COND_EQ, ctx);
-			emit_udiv(r_A, r_A, r_X, ctx);
+			emit_udivmod(r_A, r_A, r_X, ctx, BPF_DIV);
+			break;
+		case BPF_ALU | BPF_MOD | BPF_K:
+			if (k == 1) {
+				emit_mov_i(r_A, 0, ctx);
+				break;
+			}
+			emit_mov_i(r_scratch, k, ctx);
+			emit_udivmod(r_A, r_A, r_scratch, ctx, BPF_MOD);
+			break;
+		case BPF_ALU | BPF_MOD | BPF_X:
+			update_on_xread(ctx);
+			emit(ARM_CMP_I(r_X, 0), ctx);
+			emit_err_ret(ARM_COND_EQ, ctx);
+			emit_udivmod(r_A, r_A, r_X, ctx, BPF_MOD);
 			break;
 		case BPF_ALU | BPF_OR | BPF_K:
 			/* A |= K */
@@ -743,7 +756,8 @@ load_ind:
 		case BPF_ALU | BPF_RSH | BPF_K:
 			if (unlikely(k > 31))
 				return -1;
-			emit(ARM_LSR_I(r_A, r_A, k), ctx);
+			if (k)
+				emit(ARM_LSR_I(r_A, r_A, k), ctx);
 			break;
 		case BPF_ALU | BPF_RSH | BPF_X:
 			update_on_xread(ctx);
@@ -857,7 +871,9 @@ b_epilogue:
 			emit(ARM_LDR_I(r_A, r_scratch, off), ctx);
 			break;
 		case BPF_ANC | SKF_AD_IFINDEX:
+		case BPF_ANC | SKF_AD_HATYPE:
 			/* A = skb->dev->ifindex */
+			/* A = skb->dev->type */
 			ctx->seen |= SEEN_SKB;
 			off = offsetof(struct sk_buff, dev);
 			emit(ARM_LDR_I(r_scratch, r_skb, off), ctx);
@@ -867,8 +883,24 @@ b_epilogue:
 
 			BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
 						  ifindex) != 4);
-			off = offsetof(struct net_device, ifindex);
-			emit(ARM_LDR_I(r_A, r_scratch, off), ctx);
+			BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
+						  type) != 2);
+
+			if (code == (BPF_ANC | SKF_AD_IFINDEX)) {
+				off = offsetof(struct net_device, ifindex);
+				emit(ARM_LDR_I(r_A, r_scratch, off), ctx);
+			} else {
+				/*
+				 * offset of field "type" in "struct
+				 * net_device" is above what can be
+				 * used in the ldrh rd, [rn, #imm]
+				 * instruction, so load the offset in
+				 * a register and use ldrh rd, [rn, rm]
+				 */
+				off = offsetof(struct net_device, type);
+				emit_mov_i(ARM_R3, off, ctx);
+				emit(ARM_LDRH_R(r_A, r_scratch, ARM_R3), ctx);
+			}
 			break;
 		case BPF_ANC | SKF_AD_MARK:
 			ctx->seen |= SEEN_SKB;
@@ -895,6 +927,17 @@ b_epilogue:
 				OP_IMM3(ARM_AND, r_A, r_A, 0x1, ctx);
 			}
 			break;
+		case BPF_ANC | SKF_AD_PKTTYPE:
+			ctx->seen |= SEEN_SKB;
+			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
+						  __pkt_type_offset[0]) != 1);
+			off = PKT_TYPE_OFFSET();
+			emit(ARM_LDRB_I(r_A, r_skb, off), ctx);
+			emit(ARM_AND_I(r_A, r_A, PKT_TYPE_MAX), ctx);
+#ifdef __BIG_ENDIAN_BITFIELD
+			emit(ARM_LSR_I(r_A, r_A, 5), ctx);
+#endif
+			break;
 		case BPF_ANC | SKF_AD_QUEUE:
 			ctx->seen |= SEEN_SKB;
 			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
@@ -904,6 +947,14 @@ b_epilogue:
 			off = offsetof(struct sk_buff, queue_mapping);
 			emit(ARM_LDRH_I(r_A, r_skb, off), ctx);
 			break;
+		case BPF_ANC | SKF_AD_PAY_OFFSET:
+			ctx->seen |= SEEN_SKB | SEEN_CALL;
+
+			emit(ARM_MOV_R(ARM_R0, r_skb), ctx);
+			emit_mov_i(ARM_R3, (unsigned int)skb_get_poff, ctx);
+			emit_blx_r(ARM_R3, ctx);
+			emit(ARM_MOV_R(r_A, ARM_R0), ctx);
+			break;
 		case BPF_LDX | BPF_W | BPF_ABS:
 			/*
 			 * load a 32bit word from struct seccomp_data.
@@ -997,7 +1048,7 @@ void bpf_jit_compile(struct bpf_prog *fp)
 	}
 	build_epilogue(&ctx);
 
-	flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx));
+	flush_icache_range((u32)header, (u32)(ctx.target + ctx.idx));
 
 #if __LINUX_ARM_ARCH__ < 7
 	if (ctx.imm_count)
@@ -1010,7 +1061,7 @@ void bpf_jit_compile(struct bpf_prog *fp)
 
 	set_memory_ro((unsigned long)header, header->pages);
 	fp->bpf_func = (void *)ctx.target;
-	fp->jited = true;
+	fp->jited = 1;
 out:
 	kfree(ctx.offsets);
 	return;
diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h
index b2d7d9285..c46fca297 100644
--- a/arch/arm/net/bpf_jit_32.h
+++ b/arch/arm/net/bpf_jit_32.h
@@ -74,6 +74,7 @@
 #define ARM_INST_LDRB_I		0x05d00000
 #define ARM_INST_LDRB_R		0x07d00000
 #define ARM_INST_LDRH_I		0x01d000b0
+#define ARM_INST_LDRH_R		0x019000b0
 #define ARM_INST_LDR_I		0x05900000
 
 #define ARM_INST_LDM		0x08900000
@@ -114,6 +115,8 @@
 
 #define ARM_INST_UMULL		0x00800090
 
+#define ARM_INST_MLS		0x00600090
+
 /*
  * Use a suitable undefined instruction to use for ARM/Thumb2 faulting.
  * We need to be careful not to conflict with those used by other modules
@@ -160,6 +163,8 @@
 				 | (rm))
 #define ARM_LDRH_I(rt, rn, off)	(ARM_INST_LDRH_I | (rt) << 12 | (rn) << 16 \
 				 | (((off) & 0xf0) << 4) | ((off) & 0xf))
+#define ARM_LDRH_R(rt, rn, rm)	(ARM_INST_LDRH_R | (rt) << 12 | (rn) << 16 \
+				 | (rm))
 
 #define ARM_LDM(rn, regs)	(ARM_INST_LDM | (rn) << 16 | (regs))
 
@@ -207,4 +212,7 @@
 #define ARM_UMULL(rd_lo, rd_hi, rn, rm)	(ARM_INST_UMULL | (rd_hi) << 16 \
 					 | (rd_lo) << 12 | (rm) << 8 | rn)
 
+#define ARM_MLS(rd, rn, rm, ra)	(ARM_INST_MLS | (rd) << 16 | (rn) | (rm) << 8 \
+				 | (ra) << 12)
+
 #endif /* PFILTER_OPCODES_ARM_H */
diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
index 71df43547..39c20afad 100644
--- a/arch/arm/nwfpe/entry.S
+++ b/arch/arm/nwfpe/entry.S
@@ -95,9 +95,10 @@ emulate:
 	reteq	r4			@ no, return failure
 
 next:
+	uaccess_enable r3
 .Lx1:	ldrt	r6, [r5], #4		@ get the next instruction and
 					@ increment PC
-
+	uaccess_disable r3
 	and	r2, r6, #0x0F000000	@ test for FP insns
 	teq	r2, #0x0C000000
 	teqne	r2, #0x0D000000
diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c
index 5b217f460..8151bde99 100644
--- a/arch/arm/plat-iop/setup.c
+++ b/arch/arm/plat-iop/setup.c
@@ -20,12 +20,12 @@
  * the IOP3xx OCCDR must be mapped uncached and unbuffered.
  */
 static struct map_desc iop3xx_std_desc[] __initdata = {
-	 {	/* mem mapped registers */
+	{	/* mem mapped registers */
 		.virtual	= IOP3XX_PERIPHERAL_VIRT_BASE,
 		.pfn		= __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
 		.length		= IOP3XX_PERIPHERAL_SIZE,
 		.type		= MT_UNCACHED,
-	 },
+	},
 };
 
 void __init iop3xx_map_io(void)
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6ad65d8ae..101e8f2c7 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -77,41 +77,57 @@ static int iop_set_next_event(unsigned long delta,
 
 static unsigned long ticks_per_jiffy;
 
-static void iop_set_mode(enum clock_event_mode mode,
-			 struct clock_event_device *unused)
+static int iop_set_periodic(struct clock_event_device *evt)
 {
 	u32 tmr = read_tmr0();
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		write_tmr0(tmr & ~IOP_TMR_EN);
-		write_tcr0(ticks_per_jiffy - 1);
-		write_trr0(ticks_per_jiffy - 1);
-		tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* ->set_next_event sets period and enables timer */
-		tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		tmr |= IOP_TMR_EN;
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	default:
-		tmr &= ~IOP_TMR_EN;
-		break;
-	}
+	write_tmr0(tmr & ~IOP_TMR_EN);
+	write_tcr0(ticks_per_jiffy - 1);
+	write_trr0(ticks_per_jiffy - 1);
+	tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
 
 	write_tmr0(tmr);
+	return 0;
+}
+
+static int iop_set_oneshot(struct clock_event_device *evt)
+{
+	u32 tmr = read_tmr0();
+
+	/* ->set_next_event sets period and enables timer */
+	tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
+	write_tmr0(tmr);
+	return 0;
+}
+
+static int iop_shutdown(struct clock_event_device *evt)
+{
+	u32 tmr = read_tmr0();
+
+	tmr &= ~IOP_TMR_EN;
+	write_tmr0(tmr);
+	return 0;
+}
+
+static int iop_resume(struct clock_event_device *evt)
+{
+	u32 tmr = read_tmr0();
+
+	tmr |= IOP_TMR_EN;
+	write_tmr0(tmr);
+	return 0;
 }
 
 static struct clock_event_device iop_clockevent = {
-	.name		= "iop_timer0",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 300,
-	.set_next_event	= iop_set_next_event,
-	.set_mode	= iop_set_mode,
+	.name			= "iop_timer0",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 300,
+	.set_next_event		= iop_set_next_event,
+	.set_state_shutdown	= iop_shutdown,
+	.set_state_periodic	= iop_set_periodic,
+	.tick_resume		= iop_resume,
+	.set_state_oneshot	= iop_set_oneshot,
 };
 
 static irqreturn_t
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 8ca94d379..7a327bd32 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -36,6 +36,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/device.h>
@@ -137,6 +138,31 @@ static int omap_dm_timer_reset(struct omap_dm_timer *timer)
 	return 0;
 }
 
+static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
+{
+	int ret;
+	struct clk *parent;
+
+	/*
+	 * FIXME: OMAP1 devices do not use the clock framework for dmtimers so
+	 * do not call clk_get() for these devices.
+	 */
+	if (!timer->fclk)
+		return -ENODEV;
+
+	parent = clk_get(&timer->pdev->dev, NULL);
+	if (IS_ERR(parent))
+		return -ENODEV;
+
+	ret = clk_set_parent(timer->fclk, parent);
+	if (ret < 0)
+		pr_err("%s: failed to set parent\n", __func__);
+
+	clk_put(parent);
+
+	return ret;
+}
+
 static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 {
 	int rc;
@@ -166,7 +192,11 @@ static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 	__omap_dm_timer_enable_posted(timer);
 	omap_dm_timer_disable(timer);
 
-	return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+	rc = omap_dm_timer_of_set_source(timer);
+	if (rc == -ENODEV)
+		return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+
+	return rc;
 }
 
 static inline u32 omap_dm_timer_reserved_systimer(int id)
@@ -504,6 +534,12 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	if (IS_ERR(timer->fclk))
 		return -EINVAL;
 
+#if defined(CONFIG_COMMON_CLK)
+	/* Check if the clock has configurable parents */
+	if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2)
+		return 0;
+#endif
+
 	switch (source) {
 	case OMAP_TIMER_SRC_SYS_CLK:
 		parent_name = "timer_sys_ck";
@@ -943,6 +979,10 @@ static const struct of_device_id omap_timer_match[] = {
 		.compatible = "ti,am335x-timer-1ms",
 		.data = &omap3plus_pdata,
 	},
+	{
+		.compatible = "ti,dm816-timer",
+		.data = &omap3plus_pdata,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap_timer_match);
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 2235081a0..78c8bf404 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -21,7 +21,6 @@
 #include <net/dsa.h>
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
-#include <mach/bridge-regs.h>
 #include <plat/common.h>
 
 /* Create a clkdev entry for a given device/clk */
@@ -495,7 +494,7 @@ void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq)
 
 	d->netdev = &orion_ge00.dev;
 	for (i = 0; i < d->nr_chips; i++)
-		d->chip[i].host_dev = &orion_ge00_shared.dev;
+		d->chip[i].host_dev = &orion_ge_mvmdio.dev;
 	orion_switch_device.dev.platform_data = d;
 
 	platform_device_register(&orion_switch_device);
@@ -589,26 +588,6 @@ void __init orion_spi_1_init(unsigned long mapbase)
 }
 
 /*****************************************************************************
- * Watchdog
- ****************************************************************************/
-static struct resource orion_wdt_resource[] = {
-		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
-		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
-};
-
-static struct platform_device orion_wdt_device = {
-	.name		= "orion_wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
-	.resource	= orion_wdt_resource,
-};
-
-void __init orion_wdt_init(void)
-{
-	platform_device_register(&orion_wdt_device);
-}
-
-/*****************************************************************************
  * XOR
  ****************************************************************************/
 static u64 orion_xor_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 5168a52a1..f74069386 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -154,8 +154,7 @@ err_out:
  */
 static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 
 	if (orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK) ||
 	    orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK))
@@ -166,8 +165,7 @@ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 
 static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	if (!orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK))
@@ -182,8 +180,7 @@ static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 
 static int orion_gpio_get(struct gpio_chip *chip, unsigned pin)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	int val;
 
 	if (readl(GPIO_IO_CONF(ochip)) & (1 << pin)) {
@@ -198,8 +195,7 @@ static int orion_gpio_get(struct gpio_chip *chip, unsigned pin)
 static int
 orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	if (!orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK))
@@ -216,8 +212,7 @@ orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value)
 
 static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	spin_lock_irqsave(&ochip->lock, flags);
@@ -227,8 +222,7 @@ static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
 
 static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 
 	return irq_create_mapping(ochip->domain,
 				  ochip->secondary_irq_base + pin);
@@ -407,9 +401,9 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type)
 	return 0;
 }
 
-static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+static void gpio_irq_handler(struct irq_desc *desc)
 {
-	struct orion_gpio_chip *ochip = irq_get_handler_data(irq);
+	struct orion_gpio_chip *ochip = irq_desc_get_handler_data(desc);
 	u32 cause, type;
 	int i;
 
@@ -445,8 +439,8 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 
 static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
 	int i;
 
@@ -567,7 +561,7 @@ void __init orion_gpio_init(struct device_node *np,
 	ochip->mask_offset = mask_offset;
 	ochip->secondary_irq_base = secondary_irq_base;
 
-	gpiochip_add(&ochip->chip);
+	gpiochip_add_data(&ochip->chip, ochip);
 
 	/*
 	 * Mask and clear GPIO interrupts.
@@ -582,8 +576,9 @@ void __init orion_gpio_init(struct device_node *np,
 
 	for (i = 0; i < 4; i++) {
 		if (irqs[i]) {
-			irq_set_handler_data(irqs[i], ochip);
-			irq_set_chained_handler(irqs[i], gpio_irq_handler);
+			irq_set_chained_handler_and_data(irqs[i],
+							 gpio_irq_handler,
+							 ochip);
 		}
 	}
 
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index d9a24f605..9e6d76ad4 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -75,8 +75,6 @@ void __init orion_spi_init(unsigned long mapbase);
 
 void __init orion_spi_1_init(unsigned long mapbase);
 
-void __init orion_wdt_init(void);
-
 void __init orion_xor0_init(unsigned long mapbase_low,
 			    unsigned long mapbase_high,
 			    unsigned long irq_0,
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index 8c1fc0600..5b63b28b0 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -18,7 +18,6 @@
 #include <asm/exception.h>
 #include <plat/irq.h>
 #include <plat/orion-gpio.h>
-#include <mach/bridge-regs.h>
 
 void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
 {
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 7310bcfb2..5b4ff9373 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -13,7 +13,6 @@
 #include <linux/mbus.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <mach/hardware.h>
 #include <plat/orion-gpio.h>
 #include <plat/mpp.h>
 
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 261258f71..ffb93db68 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -18,6 +18,7 @@
 #include <linux/irq.h>
 #include <linux/sched_clock.h>
 #include <plat/time.h>
+#include <asm/delay.h>
 
 /*
  * MBus bridge block registers.
@@ -106,60 +107,63 @@ orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
 	return 0;
 }
 
-static void
-orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+static int orion_clkevt_shutdown(struct clock_event_device *evt)
 {
 	unsigned long flags;
 	u32 u;
 
 	local_irq_save(flags);
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
-		/*
-		 * Setup timer to fire at 1/HZ intervals.
-		 */
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
-
-		/*
-		 * Enable timer interrupt.
-		 */
-		u = readl(bridge_base + BRIDGE_MASK_OFF);
-		writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
-
-		/*
-		 * Enable timer.
-		 */
-		u = readl(timer_base + TIMER_CTRL_OFF);
-		writel(u | TIMER1_EN | TIMER1_RELOAD_EN,
-		       timer_base + TIMER_CTRL_OFF);
-	} else {
-		/*
-		 * Disable timer.
-		 */
-		u = readl(timer_base + TIMER_CTRL_OFF);
-		writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
-
-		/*
-		 * Disable timer interrupt.
-		 */
-		u = readl(bridge_base + BRIDGE_MASK_OFF);
-		writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
-
-		/*
-		 * ACK pending timer interrupt.
-		 */
-		writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
-
-	}
+
+	/* Disable timer */
+	u = readl(timer_base + TIMER_CTRL_OFF);
+	writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
+
+	/* Disable timer interrupt */
+	u = readl(bridge_base + BRIDGE_MASK_OFF);
+	writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
+
+	/* ACK pending timer interrupt */
+	writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
+
 	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int orion_clkevt_set_periodic(struct clock_event_device *evt)
+{
+	unsigned long flags;
+	u32 u;
+
+	local_irq_save(flags);
+
+	/* Setup timer to fire at 1/HZ intervals */
+	writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
+	writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
+
+	/* Enable timer interrupt */
+	u = readl(bridge_base + BRIDGE_MASK_OFF);
+	writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
+
+	/* Enable timer */
+	u = readl(timer_base + TIMER_CTRL_OFF);
+	writel(u | TIMER1_EN | TIMER1_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
+
+	local_irq_restore(flags);
+
+	return 0;
 }
 
 static struct clock_event_device orion_clkevt = {
-	.name		= "orion_tick",
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.rating		= 300,
-	.set_next_event	= orion_clkevt_next_event,
-	.set_mode	= orion_clkevt_mode,
+	.name			= "orion_tick",
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC,
+	.rating			= 300,
+	.set_next_event		= orion_clkevt_next_event,
+	.set_state_shutdown	= orion_clkevt_shutdown,
+	.set_state_periodic	= orion_clkevt_set_periodic,
+	.set_state_oneshot	= orion_clkevt_shutdown,
+	.tick_resume		= orion_clkevt_shutdown,
 };
 
 static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
@@ -185,6 +189,15 @@ orion_time_set_base(void __iomem *_timer_base)
 	timer_base = _timer_base;
 }
 
+static unsigned long orion_delay_timer_read(void)
+{
+	return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+static struct delay_timer orion_delay_timer = {
+	.read_current_timer = orion_delay_timer_read,
+};
+
 void __init
 orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 		unsigned int irq, unsigned int tclk)
@@ -199,6 +212,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 
 	ticks_per_jiffy = (tclk + HZ/2) / HZ;
 
+	orion_delay_timer.freq = tclk;
+	register_current_timer_delay(&orion_delay_timer);
+
 	/*
 	 * Set scale and timer for sched_clock.
 	 */
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 1fc941944..557b134db 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -1,8 +1,9 @@
 #
 # Makefile for code common across different PXA processor families
 #
+ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include
 
-obj-y	:= dma.o
+obj-$(CONFIG_ARCH_PXA)		:= dma.o
 
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index d92f07f6e..de2b06188 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -289,7 +289,8 @@ int pxa_request_dma (char *name, pxa_dma_prio prio,
 		/* try grabbing a DMA channel with the requested priority */
 		for (i = 0; i < num_dma_channels; i++) {
 			if ((dma_channels[i].prio == prio) &&
-			    !dma_channels[i].name) {
+			    !dma_channels[i].name &&
+			    !pxad_toggle_reserved_channel(i)) {
 				found = 1;
 				break;
 			}
@@ -326,13 +327,14 @@ void pxa_free_dma (int dma_ch)
 	local_irq_save(flags);
 	DCSR(dma_ch) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
 	dma_channels[dma_ch].name = NULL;
+	pxad_toggle_reserved_channel(dma_ch);
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL(pxa_free_dma);
 
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 {
-	int i, dint = DINT;
+	int i, dint = DINT, done = 0;
 	struct dma_channel *channel;
 
 	while (dint) {
@@ -341,16 +343,13 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 		channel = &dma_channels[i];
 		if (channel->name && channel->irq_handler) {
 			channel->irq_handler(i, channel->data);
-		} else {
-			/*
-			 * IRQ for an unregistered DMA channel:
-			 * let's clear the interrupts and disable it.
-			 */
-			printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
-			DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
+			done++;
 		}
 	}
-	return IRQ_HANDLED;
+	if (done)
+		return IRQ_HANDLED;
+	else
+		return IRQ_NONE;
 }
 
 int __init pxa_init_dma(int irq, int num_ch)
@@ -372,7 +371,8 @@ int __init pxa_init_dma(int irq, int num_ch)
 		spin_lock_init(&dma_channels[i].lock);
 	}
 
-	ret = request_irq(irq, dma_irq_handler, 0, "DMA", NULL);
+	ret = request_irq(irq, dma_irq_handler, IRQF_SHARED, "DMA",
+			  dma_channels);
 	if (ret) {
 		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
 		kfree(dma_channels);
diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
index a7b91dc06..ceba3e418 100644
--- a/arch/arm/plat-pxa/include/plat/dma.h
+++ b/arch/arm/plat-pxa/include/plat/dma.h
@@ -82,4 +82,19 @@ int pxa_request_dma (char *name,
 
 void pxa_free_dma (int dma_ch);
 
+/*
+ * Cooperation with pxa_dma + dmaengine while there remains at least one pxa
+ * driver not converted to dmaengine.
+ */
+#if defined(CONFIG_PXA_DMA)
+extern int pxad_toggle_reserved_channel(int legacy_channel);
+#else
+static inline int pxad_toggle_reserved_channel(int legacy_channel)
+{
+	return 0;
+}
+#endif
+
+extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
+
 #endif /* __PLAT_DMA_H */
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ad9529cc4..ba13f793f 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -34,7 +34,6 @@
 #include <linux/of_device.h>
 
 #include <asm/irq.h>
-#include <mach/hardware.h>
 
 static DEFINE_MUTEX(ssp_lock);
 static LIST_HEAD(ssp_list);
@@ -107,7 +106,6 @@ static const struct of_device_id pxa_ssp_of_ids[] = {
 	{ .compatible = "mvrl,pxa168-ssp",	.data = (void *) PXA168_SSP },
 	{ .compatible = "mrvl,pxa910-ssp",	.data = (void *) PXA910_SSP },
 	{ .compatible = "mrvl,ce4100-ssp",	.data = (void *) CE4100_SSP },
-	{ .compatible = "mrvl,lpss-ssp",	.data = (void *) LPSS_SSP },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index cb8e3d655..e8229b9fe 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -39,7 +39,6 @@ config S3C_LOWLEVEL_UART_PORT
 
 config SAMSUNG_ATAGS
 	def_bool n
-	depends on !ARCH_MULTIPLATFORM
 	depends on ATAGS
 	help
 	   This option enables ATAGS based boot support code for
@@ -70,6 +69,7 @@ config S3C_GPIO_TRACK
 
 config S3C_ADC
 	bool "ADC common driver support"
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  Core support for the ADC block found in the Samsung SoC systems
 	  for drivers such as the touchscreen and hwmon to use to share
@@ -217,12 +217,6 @@ config SAMSUNG_DEV_PWM
 	help
 	  Compile in platform device definition for PWM Timer
 
-config SAMSUNG_DEV_BACKLIGHT
-	bool
-	depends on SAMSUNG_DEV_PWM
-	help
-	  Compile in platform device definition LCD backlight with PWM Timer
-
 config S3C24XX_PWM
 	bool "PWM device support"
 	select PWM
@@ -231,10 +225,8 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
-config S3C_SETUP_CAMIF
-	bool
-	help
-	  Compile in common setup code for S3C CAMIF devices
+config GPIO_SAMSUNG
+	def_bool y
 
 config SAMSUNG_PM_GPIO
 	bool
@@ -242,14 +234,8 @@ config SAMSUNG_PM_GPIO
 	help
 	  Include legacy GPIO power management code for platforms not using
 	  pinctrl-samsung driver.
-
 endif
 
-config S5P_DEV_MFC
-	bool
-	help
-	  Compile in setup memory (init) code for MFC
-
 comment "Power management"
 
 config SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 1a29ab1f4..be172efec 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -4,7 +4,8 @@
 #
 # Licensed under GPLv2
 
-ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_S3C64XX) := -I$(srctree)/arch/arm/mach-s3c64xx/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include
 
 # Objects we always build independent of SoC choice
 
@@ -20,11 +21,8 @@ obj-$(CONFIG_SAMSUNG_ATAGS)	+= platformdata.o
 
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= devs.o
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= dev-uart.o
-obj-$(CONFIG_S5P_DEV_MFC)	+= s5p-dev-mfc.o
 
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
-
-obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
+obj-$(CONFIG_GPIO_SAMSUNG)     += gpio-samsung.o
 
 # PM support
 
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index efa6e8561..daf3db9f0 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -422,8 +422,7 @@ static int s3c_adc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int s3c_adc_suspend(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct adc_device *adc = platform_get_drvdata(pdev);
 	unsigned long flags;
 	u32 con;
@@ -444,8 +443,7 @@ static int s3c_adc_suspend(struct device *dev)
 
 static int s3c_adc_resume(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct adc_device *adc = platform_get_drvdata(pdev);
 	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
 	int ret;
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
index 71333bb61..a107b3a0b 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/plat-samsung/cpu.c
@@ -29,14 +29,14 @@ EXPORT_SYMBOL(samsung_rev);
 
 void __init s3c64xx_init_cpu(void)
 {
-	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+	samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0x118);
 	if (!samsung_cpu_id) {
 		/*
 		 * S3C6400 has the ID register in a different place,
 		 * and needs a write before it can be read.
 		 */
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+		writel_relaxed(0x0, S3C_VA_SYS + 0xA1C);
+		samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C);
 	}
 
 	samsung_cpu_rev = 0;
@@ -44,9 +44,9 @@ void __init s3c64xx_init_cpu(void)
 	pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
 }
 
-void __init s5p_init_cpu(void __iomem *cpuid_addr)
+void __init s5p_init_cpu(const void __iomem *cpuid_addr)
 {
-	samsung_cpu_id = __raw_readl(cpuid_addr);
+	samsung_cpu_id = readl_relaxed(cpuid_addr);
 	samsung_cpu_rev = samsung_cpu_id & 0xFF;
 
 	pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 83c7d154b..e93aa6734 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -36,7 +36,7 @@
 #include <linux/platform_data/s3c-hsotg.h>
 #include <linux/platform_data/dma-s3c24xx.h>
 
-#include <media/s5p_hdmi.h>
+#include <linux/platform_data/media/s5p_hdmi.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -65,18 +65,25 @@
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-spi.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <linux/platform_data/spi-s3c64xx.h>
 
-static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
+#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
 
 /* AC97 */
 #ifdef CONFIG_CPU_S3C2440
 static struct resource s3c_ac97_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
 	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
-	[2] = DEFINE_RES_DMA_NAMED(DMACH_PCM_OUT, "PCM out"),
-	[3] = DEFINE_RES_DMA_NAMED(DMACH_PCM_IN, "PCM in"),
-	[4] = DEFINE_RES_DMA_NAMED(DMACH_MIC_IN, "Mic in"),
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+#ifdef CONFIG_S3C24XX_DMAC
+	.dma_filter = s3c24xx_dma_filter,
+#endif
+	.dma_playback = (void *)DMACH_PCM_OUT,
+	.dma_capture = (void *)DMACH_PCM_IN,
+	.dma_capture_mic = (void *)DMACH_MIC_IN,
 };
 
 struct platform_device s3c_device_ac97 = {
@@ -87,6 +94,7 @@ struct platform_device s3c_device_ac97 = {
 	.dev		= {
 		.dma_mask		= &samsung_device_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_ac97_pdata,
 	}
 };
 #endif /* CONFIG_CPU_S3C2440 */
@@ -111,12 +119,12 @@ struct platform_device s3c_device_adc = {
 #if defined(CONFIG_SAMSUNG_DEV_ADC)
 static struct resource s3c_adc_resource[] = {
 	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-	[2] = DEFINE_RES_IRQ(IRQ_ADC),
+	[1] = DEFINE_RES_IRQ(IRQ_ADC),
+	[2] = DEFINE_RES_IRQ(IRQ_TC),
 };
 
 struct platform_device s3c_device_adc = {
-	.name		= "samsung-adc",
+	.name		= "exynos-adc",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
 	.resource	= s3c_adc_resource,
@@ -566,6 +574,14 @@ static struct resource s3c_iis_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
 };
 
+static struct s3c_audio_pdata s3c_iis_platdata = {
+#ifdef CONFIG_S3C24XX_DMAC
+	.dma_filter = s3c24xx_dma_filter,
+#endif
+	.dma_playback = (void *)DMACH_I2S_OUT,
+	.dma_capture = (void *)DMACH_I2S_IN,
+};
+
 struct platform_device s3c_device_iis = {
 	.name		= "s3c24xx-iis",
 	.id		= -1,
@@ -574,6 +590,7 @@ struct platform_device s3c_device_iis = {
 	.dev		= {
 		.dma_mask		= &samsung_device_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_iis_platdata,
 	}
 };
 #endif /* CONFIG_PLAT_S3C24XX */
@@ -710,15 +727,6 @@ static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
 			return -ENOMEM;
 	}
 
-	if (set->ecc_layout) {
-		ptr = kmemdup(set->ecc_layout,
-			      sizeof(struct nand_ecclayout), GFP_KERNEL);
-		set->ecc_layout = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
 	return 0;
 }
 
@@ -939,31 +947,19 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_
 #endif /* CONFIG_PLAT_S3C24XX */
 
 #ifdef CONFIG_SAMSUNG_DEV_TS
-static struct resource s3c_ts_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
 static struct s3c2410_ts_mach_info default_ts_data __initdata = {
 	.delay			= 10000,
 	.presc			= 49,
 	.oversampling_shift	= 2,
 };
 
-struct platform_device s3c_device_ts = {
-	.name		= "s3c64xx-ts",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
-	.resource	= s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
 {
 	if (!pd)
 		pd = &default_ts_data;
 
 	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
-			 &s3c_device_ts);
+			 &s3c_device_adc);
 }
 #endif /* CONFIG_SAMSUNG_DEV_TS */
 
@@ -1042,11 +1038,11 @@ struct platform_device s3c_device_usb_hsotg = {
 	},
 };
 
-void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
+void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
 {
-	struct s3c_hsotg_plat *npd;
+	struct dwc2_hsotg_plat *npd;
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c_hsotg_plat),
+	npd = s3c_set_platdata(pd, sizeof(struct dwc2_hsotg_plat),
 			&s3c_device_usb_hsotg);
 
 	if (!npd->phy_init)
@@ -1100,9 +1096,7 @@ struct platform_device s3c_device_wdt = {
 #ifdef CONFIG_S3C64XX_DEV_SPI0
 static struct resource s3c64xx_spi0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI0),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
 };
 
 struct platform_device s3c64xx_device_spi0 = {
@@ -1130,6 +1124,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
+	pd.dma_tx = (void *)DMACH_SPI0_TX;
+	pd.dma_rx = (void *)DMACH_SPI0_RX;
 #if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
 #elif defined(CONFIG_S3C64XX_PL080)
@@ -1145,9 +1141,7 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 #ifdef CONFIG_S3C64XX_DEV_SPI1
 static struct resource s3c64xx_spi1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI1),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
 };
 
 struct platform_device s3c64xx_device_spi1 = {
@@ -1175,12 +1169,15 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
+	pd.dma_tx = (void *)DMACH_SPI1_TX;
+	pd.dma_rx = (void *)DMACH_SPI1_RX;
 #if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
 #elif defined(CONFIG_S3C64XX_PL080)
 	pd.filter = pl08x_filter_id;
 #endif
 
+
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
 }
 #endif /* CONFIG_S3C64XX_DEV_SPI1 */
@@ -1188,9 +1185,7 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 #ifdef CONFIG_S3C64XX_DEV_SPI2
 static struct resource s3c64xx_spi2_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI2),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI2),
 };
 
 struct platform_device s3c64xx_device_spi2 = {
@@ -1218,6 +1213,8 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
+	pd.dma_tx = (void *)DMACH_SPI2_TX;
+	pd.dma_rx = (void *)DMACH_SPI2_RX;
 #if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
 #elif defined(CONFIG_S3C64XX_PL080)
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
new file mode 100644
index 000000000..7861488f7
--- /dev/null
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -0,0 +1,1328 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+
+#include <asm/irq.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/pm.h>
+
+int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup;
+
+	pup = __raw_readl(reg);
+	pup &= ~(3 << shift);
+	pup |= pull << shift;
+	__raw_writel(pup, reg);
+
+	return 0;
+}
+
+samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup = __raw_readl(reg);
+
+	pup >>= shift;
+	pup &= 0x3;
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+
+int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+			 unsigned int off, samsung_gpio_pull_t pull)
+{
+	switch (pull) {
+	case S3C_GPIO_PULL_NONE:
+		pull = 0x01;
+		break;
+	case S3C_GPIO_PULL_UP:
+		pull = 0x00;
+		break;
+	case S3C_GPIO_PULL_DOWN:
+		pull = 0x02;
+		break;
+	}
+	return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	samsung_gpio_pull_t pull;
+
+	pull = samsung_gpio_getpull_updown(chip, off);
+
+	switch (pull) {
+	case 0x00:
+		pull = S3C_GPIO_PULL_UP;
+		break;
+	case 0x01:
+	case 0x03:
+		pull = S3C_GPIO_PULL_NONE;
+		break;
+	case 0x02:
+		pull = S3C_GPIO_PULL_DOWN;
+		break;
+	}
+
+	return pull;
+}
+
+static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
+				  unsigned int off, samsung_gpio_pull_t pull,
+				  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	if (pull == updown)
+		pup &= ~(1 << off);
+	else if (pull == S3C_GPIO_PULL_NONE)
+		pup |= (1 << off);
+	else
+		return -EINVAL;
+
+	__raw_writel(pup, reg);
+	return 0;
+}
+
+static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
+						  unsigned int off,
+						  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup &= (1 << off);
+	return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+			     unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+					       unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+			       unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+
+/*
+ * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *	00 = input
+ *	01 = output
+ *	1x = special function
+ */
+
+static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off * 2;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		if (cfg > 3)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x3 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which
+ * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+
+static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off * 2;
+	con &= 3;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *	0000 = Input
+ *	0001 = Output
+ *	others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+ */
+
+static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to samsung_gpio_setcfg_4bit().
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ */
+
+static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	con = __raw_readl(reg);
+	con >>= shift;
+	con &= 0xf;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/*
+ * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+ */
+
+static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+
+		/* Map output to 0, and SFN2 to 1 */
+		cfg -= 1;
+		if (cfg > 1)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x1 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ * @sa samsung_gpio_getcfg_4bit
+ */
+
+static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
+					  unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off;
+	con &= 1;
+	con++;
+
+	return S3C_GPIO_SFN(con);
+}
+#endif
+
+static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config = samsung_gpio_setcfg_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config = samsung_gpio_getcfg_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull = samsung_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull = samsung_gpio_getpull_updown;
+	}
+}
+
+struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
+	.set_config	= samsung_gpio_setcfg_2bit,
+	.get_config	= samsung_gpio_getcfg_2bit,
+};
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
+	.set_config	= s3c24xx_gpio_setcfg_abank,
+	.get_config	= s3c24xx_gpio_getcfg_abank,
+};
+#endif
+
+static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
+	[0] = {
+		.cfg_eint	= 0x0,
+	},
+	[1] = {
+		.cfg_eint	= 0x3,
+	},
+	[2] = {
+		.cfg_eint	= 0x7,
+	},
+	[3] = {
+		.cfg_eint	= 0xF,
+	},
+	[4] = {
+		.cfg_eint	= 0x0,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+	[5] = {
+		.cfg_eint	= 0x2,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+	[6] = {
+		.cfg_eint	= 0x3,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+	[7] = {
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+};
+
+/*
+ * Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *	        gpio n: 2 bits starting at (2*n)
+ *		00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+*/
+
+static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+
+	__raw_writel(con, base + 0x00);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= 1 << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+/*
+ * The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
+ * state of the output.
+ */
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	if (ourchip->bitmap_gpio_int & BIT(offset))
+		con |= 0xf << con_4bit_shift(offset);
+	else
+		con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	pr_debug("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/*
+ * The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
+ * routines we store the 'base + 0x4' address so that these routines see
+ * the data register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	pr_debug("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/* The next set of routines are for the case of s3c24xx bank a */
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+	return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	dat = __raw_readl(base + 0x04);
+
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+
+	__raw_writel(dat, base + 0x04);
+
+	con &= ~(1 << offset);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+#endif
+
+static void samsung_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+}
+
+static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+/*
+ * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own samsung_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
+{
+	unsigned int gpn;
+	int i;
+
+	gpn = chip->chip.base;
+	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+		s3c_gpios[gpn] = chip;
+	}
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/*
+ * samsung_gpiolib_add() - add the Samsung gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+
+static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
+{
+	struct gpio_chip *gc = &chip->chip;
+	int ret;
+
+	BUG_ON(!chip->base);
+	BUG_ON(!gc->label);
+	BUG_ON(!gc->ngpio);
+
+	spin_lock_init(&chip->lock);
+
+	if (!gc->direction_input)
+		gc->direction_input = samsung_gpiolib_2bit_input;
+	if (!gc->direction_output)
+		gc->direction_output = samsung_gpiolib_2bit_output;
+	if (!gc->set)
+		gc->set = samsung_gpiolib_set;
+	if (!gc->get)
+		gc->get = samsung_gpiolib_get;
+
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			pr_err("gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		pr_err("gpio: %s has no PM function\n", gc->label);
+#endif
+
+	/* gpiochip_add() prints own failure message on error. */
+	ret = gpiochip_add_data(gc, chip);
+	if (ret >= 0)
+		s3c_gpiolib_track(chip);
+}
+
+static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
+					     int nr_chips, void __iomem *base)
+{
+	int i;
+	struct gpio_chip *gc = &chip->chip;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		/* skip banks not present on SoC */
+		if (chip->chip.base >= S3C_GPIO_END)
+			continue;
+
+		if (!chip->config)
+			chip->config = &s3c24xx_gpiocfg_default;
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x10);
+
+		if (!gc->direction_input)
+			gc->direction_input = samsung_gpiolib_2bit_input;
+		if (!gc->direction_output)
+			gc->direction_output = samsung_gpiolib_2bit_output;
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base,
+						  unsigned int offset)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_2bit_input;
+		chip->chip.direction_output = samsung_gpiolib_2bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[7];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * offset);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+/*
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+
+static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x20);
+
+		chip->bitmap_gpio_int = 0;
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
+						   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct samsung_gpio_chip *samsung_chip = gpiochip_get_data(chip);
+
+	return samsung_chip->irq_base + offset;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < 4) {
+		if (soc_is_s3c2412())
+			return IRQ_EINT0_2412 + offset;
+		else
+			return IRQ_EINT0 + offset;
+	}
+
+	if (offset < 8)
+		return IRQ_EINT4 + offset - 4;
+
+	return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+#endif
+
+struct samsung_gpio_chip s3c24xx_gpios[] = {
+#ifdef CONFIG_PLAT_S3C24XX
+	{
+		.config	= &s3c24xx_gpiocfg_banka,
+		.chip	= {
+			.base			= S3C2410_GPA(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOA",
+			.ngpio			= 27,
+			.direction_input	= s3c24xx_gpiolib_banka_input,
+			.direction_output	= s3c24xx_gpiolib_banka_output,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPB(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOB",
+			.ngpio	= 11,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPC(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOC",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPD(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOD",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPE(0),
+			.label	= "GPIOE",
+			.owner	= THIS_MODULE,
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPF(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOF",
+			.ngpio	= 8,
+			.to_irq	= s3c24xx_gpiolib_fbank_to_irq,
+		},
+	}, {
+		.irq_base = IRQ_EINT8,
+		.chip	= {
+			.base	= S3C2410_GPG(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOG",
+			.ngpio	= 16,
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPH(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOH",
+			.ngpio	= 15,
+		},
+	},
+		/* GPIOS for the S3C2443 and later devices. */
+	{
+		.base	= S3C2440_GPJCON,
+		.chip	= {
+			.base	= S3C2410_GPJ(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOJ",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPKCON,
+		.chip	= {
+			.base	= S3C2410_GPK(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOK",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPLCON,
+		.chip	= {
+			.base	= S3C2410_GPL(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOL",
+			.ngpio	= 15,
+		},
+	}, {
+		.base	= S3C2443_GPMCON,
+		.chip	= {
+			.base	= S3C2410_GPM(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOM",
+			.ngpio	= 2,
+		},
+	},
+#endif
+};
+
+/*
+ * GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+	{
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+			.to_irq = s3c64xx_gpiolib_mbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+			.to_irq = s3c64xx_gpiolib_lbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.irq_base = IRQ_EINT(0),
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/* TODO: cleanup soc_is_* */
+static __init int samsung_gpiolib_init(void)
+{
+	/*
+	 * Currently there are two drivers that can provide GPIO support for
+	 * Samsung SoCs. For device tree enabled platforms, the new
+	 * pinctrl-samsung driver is used, providing both GPIO and pin control
+	 * interfaces. For legacy (non-DT) platforms this driver is used.
+	 */
+	if (of_have_populated_dt())
+		return 0;
+
+	if (soc_is_s3c24xx()) {
+		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+				ARRAY_SIZE(samsung_gpio_cfgs));
+		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
+				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
+	} else if (soc_is_s3c64xx()) {
+		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+				ARRAY_SIZE(samsung_gpio_cfgs));
+		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
+				ARRAY_SIZE(s3c64xx_gpios_2bit),
+				S3C64XX_VA_GPIO + 0xE0, 0x20);
+		samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
+				ARRAY_SIZE(s3c64xx_gpios_4bit),
+				S3C64XX_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
+				ARRAY_SIZE(s3c64xx_gpios_4bit2));
+	}
+
+	return 0;
+}
+core_initcall(samsung_gpiolib_init);
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	int ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setcfg(chip, offset, config);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg, samsung_gpio_pull_t pull)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		s3c_gpio_setpull(start, pull);
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	unsigned ret = 0;
+	int offset;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		ret = samsung_gpio_do_getcfg(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset, ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setpull(chip, offset, pull);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	u32 pup = 0;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		pup = samsung_gpio_do_getpull(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
+#ifdef CONFIG_PLAT_S3C24XX
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+	unsigned long flags;
+	unsigned long misccr;
+
+	local_irq_save(flags);
+	misccr = __raw_readl(S3C24XX_MISCCR);
+	misccr &= ~clear;
+	misccr ^= change;
+	__raw_writel(misccr, S3C24XX_MISCCR);
+	local_irq_restore(flags);
+
+	return misccr;
+}
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index 317c52303..37cf20e04 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -39,7 +39,7 @@ struct s3c2410_iobank_timing {
 	unsigned int	tacs;
 	unsigned int	tcos;
 	unsigned int	tacc;
-	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcoh;		/* nCS hold after nOE/nWE */
 	unsigned int	tcah;		/* Address hold after nCS */
 	unsigned char	nwait_en;	/* nWait enabled for bank. */
 };
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 61d14f3a0..b7b702a72 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -113,6 +113,7 @@ extern void s3c_init_cpu(unsigned long idcode,
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 
 extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(const void __iomem *cpuid_addr);
 
 extern unsigned int samsung_rev(void);
 
diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
index 4e5d9588b..1f2972a74 100644
--- a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+++ b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
@@ -48,7 +48,7 @@ struct s3c2410fb_display {
 
 struct s3c2410fb_mach_info {
 
-	struct s3c2410fb_display *displays;	/* attached diplays info */
+	struct s3c2410fb_display *displays;	/* attached displays info */
 	unsigned num_displays;			/* number of defined displays */
 	unsigned default_display;
 
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index b5294eff1..21391faab 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -35,7 +35,7 @@ struct samsung_gpio_chip;
  * struct samsung_gpio_cfg GPIO configuration
  * @cfg_eint: Configuration setting when used for external interrupt source
  * @get_pull: Read the current pull configuration for the GPIO
- * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_pull: Set the current pull configuration for the GPIO
  * @set_config: Set the current configuration for the GPIO
  * @get_config: Read the current configuration for the GPIO
  *
diff --git a/arch/arm/plat-samsung/include/plat/keypad-core.h b/arch/arm/plat-samsung/include/plat/keypad-core.h
deleted file mode 100644
index d513e1b3a..000000000
--- a/arch/arm/plat-samsung/include/plat/keypad-core.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * Samsung keypad controller core function
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_KEYPAD_CORE_H
-#define __ASM_ARCH_KEYPAD_CORE_H
-
-/* These function are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void samsung_keypad_setname(char *name)
-{
-#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
-	samsung_device_keypad.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_KEYPAD_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
index c0c70a895..6feedd47d 100644
--- a/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -27,10 +27,6 @@
 #define S3C2410_PA_UART		(0x50000000)
 #define S3C24XX_PA_UART		S3C2410_PA_UART
 
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET		(0x400)
-#endif
-
 /*
  * GPIO ports
  *
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index f5cf2bd20..b63aeebb9 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -18,12 +18,10 @@
 
 #define S5P_VA_DMC0		S3C_ADDR(0x02440000)
 #define S5P_VA_DMC1		S3C_ADDR(0x02480000)
-#define S5P_VA_SROMC		S3C_ADDR(0x024C0000)
 
 #define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
 #define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
 #define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
-#define S5P_VA_TWD		S5P_VA_COREPERI(0x600)
 
 #define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
 #define VA_VIC0			VA_VIC(0)
@@ -31,10 +29,6 @@
 #define VA_VIC2			VA_VIC(2)
 #define VA_VIC3			VA_VIC(3)
 
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET		(0x400)
-#endif
-
 #include <plat/map-s3c.h>
 
 #endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 7f415ce74..9dd562ab0 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -41,14 +41,6 @@ static inline int s3c64xx_pm_init(void)
 extern unsigned long s3c_irqwake_intmask;
 extern unsigned long s3c_irqwake_eintmask;
 
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-#ifdef CONFIG_PM_SLEEP
-extern unsigned long s3c_irqwake_eintallow;
-#else
-#define s3c_irqwake_eintallow 0
-#endif
-
 /* per-cpu sleep functions */
 
 extern void (*pm_cpu_prep)(void);
diff --git a/arch/arm/plat-samsung/include/plat/regs-srom.h b/arch/arm/plat-samsung/include/plat/regs-srom.h
deleted file mode 100644
index 9b6729c81..000000000
--- a/arch/arm/plat-samsung/include/plat/regs-srom.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_REGS_SROM_H
-#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_SROMREG(x)		(S5P_VA_SROMC + (x))
-
-#define S5P_SROM_BW		S5P_SROMREG(0x0)
-#define S5P_SROM_BC0		S5P_SROMREG(0x4)
-#define S5P_SROM_BC1		S5P_SROMREG(0x8)
-#define S5P_SROM_BC2		S5P_SROMREG(0xc)
-#define S5P_SROM_BC3		S5P_SROMREG(0x10)
-#define S5P_SROM_BC4		S5P_SROMREG(0x14)
-#define S5P_SROM_BC5		S5P_SROMREG(0x18)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5P_SROM_BW__DATAWIDTH__SHIFT		0
-#define S5P_SROM_BW__ADDRMODE__SHIFT		1
-#define S5P_SROM_BW__WAITENABLE__SHIFT		2
-#define S5P_SROM_BW__BYTEENABLE__SHIFT		3
-
-#define S5P_SROM_BW__CS_MASK			0xf
-
-#define S5P_SROM_BW__NCS0__SHIFT		0
-#define S5P_SROM_BW__NCS1__SHIFT		4
-#define S5P_SROM_BW__NCS2__SHIFT		8
-#define S5P_SROM_BW__NCS3__SHIFT		12
-#define S5P_SROM_BW__NCS4__SHIFT		16
-#define S5P_SROM_BW__NCS5__SHIFT		20
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5P_SROM_BCX__PMC__SHIFT		0
-#define S5P_SROM_BCX__TACP__SHIFT		4
-#define S5P_SROM_BCX__TCAH__SHIFT		8
-#define S5P_SROM_BCX__TCOH__SHIFT		12
-#define S5P_SROM_BCX__TACC__SHIFT		16
-#define S5P_SROM_BCX__TCOS__SHIFT		24
-#define S5P_SROM_BCX__TACS__SHIFT		28
-
-#endif /* __PLAT_SAMSUNG_REGS_SROM_H */
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 11fbbc26e..3776f7e75 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -152,6 +152,11 @@ static int __init s3c_arch_init(void)
 {
 	int ret;
 
+	/* init is only needed for ATAGS based platforms */
+	if (!IS_ENABLED(CONFIG_ATAGS) ||
+	    (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+		return 0;
+
 	// do the correct init for cpu
 
 	if (cpu == NULL) {
diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c
index 04aff2c31..d63516374 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -5,7 +5,7 @@
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C Power Mangament - suspend/resume memory corruptiuon check.
+ * S3C Power Mangament - suspend/resume memory corruption check.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -53,8 +53,8 @@ static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
 		if (ptr->child != NULL)
 			s3c_pm_run_res(ptr->child, fn, arg);
 
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
+		if ((ptr->flags & IORESOURCE_SYSTEM_RAM)
+				== IORESOURCE_SYSTEM_RAM) {
 			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
 				  (unsigned long)ptr->start,
 				  (unsigned long)ptr->end);
diff --git a/arch/arm/plat-samsung/pm-common.c b/arch/arm/plat-samsung/pm-common.c
index 515cd5337..6534c3ff9 100644
--- a/arch/arm/plat-samsung/pm-common.c
+++ b/arch/arm/plat-samsung/pm-common.c
@@ -31,7 +31,7 @@
 void s3c_pm_do_save(struct sleep_save *ptr, int count)
 {
 	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
+		ptr->val = readl_relaxed(ptr->reg);
 		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
 	}
 }
@@ -51,9 +51,9 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
 {
 	for (; count > 0; count--, ptr++) {
 		pr_debug("restore %p (restore %08lx, was %08x)\n",
-				ptr->reg, ptr->val, __raw_readl(ptr->reg));
+				ptr->reg, ptr->val, readl_relaxed(ptr->reg));
 
-		__raw_writel(ptr->val, ptr->reg);
+		writel_relaxed(ptr->val, ptr->reg);
 	}
 }
 
@@ -71,5 +71,5 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
 void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
 {
 	for (; count > 0; count--, ptr++)
-		__raw_writel(ptr->val, ptr->reg);
+		writel_relaxed(ptr->val, ptr->reg);
 }
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 82777c649..d7803b434 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -23,14 +23,10 @@
 #include <asm/cacheflush.h>
 #include <asm/suspend.h>
 
-#ifdef CONFIG_SAMSUNG_ATAGS
 #include <mach/map.h>
-#ifndef CONFIG_ARCH_EXYNOS
 #include <mach/regs-clock.h>
 #include <mach/regs-irq.h>
-#endif
 #include <mach/irqs.h>
-#endif
 
 #include <asm/irq.h>
 
diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
deleted file mode 100644
index 0b04b6b0f..000000000
--- a/arch/arm/plat-samsung/s5p-dev-mfc.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
- *
- * Base S5P MFC resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-#include <linux/of_fdt.h>
-#include <linux/of.h>
-
-static struct platform_device s5p_device_mfc_l;
-static struct platform_device s5p_device_mfc_r;
-
-struct s5p_mfc_dt_meminfo {
-	unsigned long	loff;
-	unsigned long	lsize;
-	unsigned long	roff;
-	unsigned long	rsize;
-	char		*compatible;
-};
-
-struct s5p_mfc_reserved_mem {
-	phys_addr_t	base;
-	unsigned long	size;
-	struct device	*dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
-
-static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
-				phys_addr_t lbase, unsigned int lsize)
-{
-	int i;
-
-	s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
-	s5p_mfc_mem[0].base = rbase;
-	s5p_mfc_mem[0].size = rsize;
-
-	s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
-	s5p_mfc_mem[1].base = lbase;
-	s5p_mfc_mem[1].size = lsize;
-
-	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
-		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
-		if (memblock_remove(area->base, area->size)) {
-			printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
-			       area->size, (unsigned long) area->base);
-			area->base = 0;
-		}
-	}
-}
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
-				int depth, void *data)
-{
-	const __be32 *prop;
-	int len;
-	struct s5p_mfc_dt_meminfo mfc_mem;
-
-	if (!data)
-		return 0;
-
-	if (!of_flat_dt_is_compatible(node, data))
-		return 0;
-
-	prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
-	if (!prop || (len != 2 * sizeof(unsigned long)))
-		return 0;
-
-	mfc_mem.loff = be32_to_cpu(prop[0]);
-	mfc_mem.lsize = be32_to_cpu(prop[1]);
-
-	prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
-	if (!prop || (len != 2 * sizeof(unsigned long)))
-		return 0;
-
-	mfc_mem.roff = be32_to_cpu(prop[0]);
-	mfc_mem.rsize = be32_to_cpu(prop[1]);
-
-	s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize,
-			mfc_mem.loff, mfc_mem.lsize);
-
-	return 1;
-}
diff --git a/arch/arm/plat-samsung/watchdog-reset.c b/arch/arm/plat-samsung/watchdog-reset.c
index 2ecb50bea..307d8ad96 100644
--- a/arch/arm/plat-samsung/watchdog-reset.c
+++ b/arch/arm/plat-samsung/watchdog-reset.c
@@ -3,7 +3,7 @@
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Coyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
  * Watchdog reset support for Samsung SoCs.
  *
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 49b8ef915..98b9b8e9f 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -1,8 +1,5 @@
 if PLAT_VERSATILE
 
-config PLAT_VERSATILE_CLOCK
-	bool
-
 config PLAT_VERSATILE_SCHED_CLOCK
 	bool
 
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 03c4900ac..bff3ba889 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,5 +1,4 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
-obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
 obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/plat-versatile/clock.c b/arch/arm/plat-versatile/clock.c
deleted file mode 100644
index 5c8b6564f..000000000
--- a/arch/arm/plat-versatile/clock.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  linux/arch/arm/plat-versatile/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/hardware/icst.h>
-
-#include <mach/clkdev.h>
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	long ret = -EIO;
-	if (clk->ops && clk->ops->round)
-		ret = clk->ops->round(clk, rate);
-	return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-	if (clk->ops && clk->ops->set)
-		ret = clk->ops->set(clk, rate);
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-long icst_clk_round(struct clk *clk, unsigned long rate)
-{
-	struct icst_vco vco;
-	vco = icst_hz_to_vco(clk->params, rate);
-	return icst_hz(clk->params, vco);
-}
-EXPORT_SYMBOL(icst_clk_round);
-
-int icst_clk_set(struct clk *clk, unsigned long rate)
-{
-	struct icst_vco vco;
-
-	vco = icst_hz_to_vco(clk->params, rate);
-	clk->rate = icst_hz(clk->params, vco);
-	clk->ops->setvco(clk, vco);
-
-	return 0;
-}
-EXPORT_SYMBOL(icst_clk_set);
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index 53feb90c8..c23665101 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -18,6 +18,8 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
+#include <plat/platsmp.h>
+
 /*
  * Write pen_release in a way that is guaranteed to be visible to all
  * observers, irrespective of whether they're taking part in coherency
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index 32d05c821..6e4cd1867 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -4,7 +4,10 @@
 # Copyright (C) 2001 Russell King
 #
 
-include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
-	@$(kecho) '  Generating $@'
-	@mkdir -p $(dir $@)
-	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
+quiet_cmd_gen_mach = GEN     $@
+      cmd_gen_mach = mkdir -p $(dir $@) && \
+		     $(AWK) -f $(filter-out $(PHONY),$^) > $@ || \
+		     { rm -f $@; /bin/false; }
+
+include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types FORCE
+	$(call if_changed,gen_mach)
diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile
index 1160434ee..59a8fa7b8 100644
--- a/arch/arm/vdso/Makefile
+++ b/arch/arm/vdso/Makefile
@@ -74,5 +74,5 @@ $(MODLIB)/vdso: FORCE
 	@mkdir -p $(MODLIB)/vdso
 
 PHONY += vdso_install
-vdso_install: $(obj)/vdso.so.dbg $(MODLIB)/vdso FORCE
+vdso_install: $(obj)/vdso.so.dbg $(MODLIB)/vdso
 	$(call cmd,vdso_install)
diff --git a/arch/arm/vdso/vdso.S b/arch/arm/vdso/vdso.S
index b2b97e3e7..a62a7b64f 100644
--- a/arch/arm/vdso/vdso.S
+++ b/arch/arm/vdso/vdso.S
@@ -23,9 +23,8 @@
 #include <linux/const.h>
 #include <asm/page.h>
 
-	__PAGE_ALIGNED_DATA
-
 	.globl vdso_start, vdso_end
+	.section .data..ro_after_init
 	.balign PAGE_SIZE
 vdso_start:
 	.incbin "arch/arm/vdso/vdso.so"
diff --git a/arch/arm/vdso/vdsomunge.c b/arch/arm/vdso/vdsomunge.c
index aedec81d1..f6455273b 100644
--- a/arch/arm/vdso/vdsomunge.c
+++ b/arch/arm/vdso/vdsomunge.c
@@ -45,7 +45,6 @@
  * it does.
  */
 
-#include <byteswap.h>
 #include <elf.h>
 #include <errno.h>
 #include <fcntl.h>
@@ -59,6 +58,16 @@
 #include <sys/types.h>
 #include <unistd.h>
 
+#define swab16(x) \
+	((((x) & 0x00ff) << 8) | \
+	 (((x) & 0xff00) >> 8))
+
+#define swab32(x) \
+	((((x) & 0x000000ff) << 24) | \
+	 (((x) & 0x0000ff00) <<  8) | \
+	 (((x) & 0x00ff0000) >>  8) | \
+	 (((x) & 0xff000000) >> 24))
+
 #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
 #define HOST_ORDER ELFDATA2LSB
 #elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
@@ -104,17 +113,17 @@ static void cleanup(void)
 
 static Elf32_Word read_elf_word(Elf32_Word word, bool swap)
 {
-	return swap ? bswap_32(word) : word;
+	return swap ? swab32(word) : word;
 }
 
 static Elf32_Half read_elf_half(Elf32_Half half, bool swap)
 {
-	return swap ? bswap_16(half) : half;
+	return swap ? swab16(half) : half;
 }
 
 static void write_elf_word(Elf32_Word val, Elf32_Word *dst, bool swap)
 {
-	*dst = swap ? bswap_32(val) : val;
+	*dst = swap ? swab32(val) : val;
 }
 
 int main(int argc, char **argv)
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 2a61e4b04..da0b33deb 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -156,10 +156,6 @@ static void vfp_thread_copy(struct thread_info *thread)
  *   - we could be preempted if tree preempt rcu is enabled, so
  *	it is unsafe to use thread->cpu.
  *  THREAD_NOTIFY_EXIT
- *   - the thread (v) will be running on the local CPU, so
- *	v === current_thread_info()
- *   - thread->cpu is the local CPU number at the time it is accessed,
- *	but may change at any time.
  *   - we could be preempted if tree preempt rcu is enabled, so
  *	it is unsafe to use thread->cpu.
  */
@@ -647,19 +643,19 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
  * hardware state at every thread switch.  We clear our held state when
  * a CPU has been killed, indicating that the VFP hardware doesn't contain
  * a threads VFP state.  When a CPU starts up, we re-enable access to the
- * VFP hardware.
- *
- * Both CPU_DYING and CPU_STARTING are called on the CPU which
+ * VFP hardware. The callbacks below are called on the CPU which
  * is being offlined/onlined.
  */
-static int vfp_hotplug(struct notifier_block *b, unsigned long action,
-	void *hcpu)
+static int vfp_dying_cpu(unsigned int cpu)
 {
-	if (action == CPU_DYING || action == CPU_DYING_FROZEN)
-		vfp_current_hw_state[(long)hcpu] = NULL;
-	else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
-		vfp_enable(NULL);
-	return NOTIFY_OK;
+	vfp_force_reload(cpu, current_thread_info());
+	return 0;
+}
+
+static int vfp_starting_cpu(unsigned int unused)
+{
+	vfp_enable(NULL);
+	return 0;
 }
 
 void vfp_kmode_exception(void)
@@ -736,6 +732,10 @@ static int __init vfp_init(void)
 	unsigned int vfpsid;
 	unsigned int cpu_arch = cpu_architecture();
 
+	/*
+	 * Enable the access to the VFP on all online CPUs so the
+	 * following test on FPSID will succeed.
+	 */
 	if (cpu_arch >= CPU_ARCH_ARMv6)
 		on_each_cpu(vfp_enable, NULL, 1);
 
@@ -798,7 +798,9 @@ static int __init vfp_init(void)
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;
 	}
 
-	hotcpu_notifier(vfp_hotplug, 0);
+	cpuhp_setup_state_nocalls(CPUHP_AP_ARM_VFP_STARTING,
+				  "AP_ARM_VFP_STARTING", vfp_starting_cpu,
+				  vfp_dying_cpu);
 
 	vfp_vector = vfp_support_entry;
 
diff --git a/arch/arm/xen/Makefile b/arch/arm/xen/Makefile
index 129695234..227952103 100644
--- a/arch/arm/xen/Makefile
+++ b/arch/arm/xen/Makefile
@@ -1 +1,2 @@
 obj-y		:= enlighten.o hypercall.o grant-table.o p2m.o mm.o
+obj-$(CONFIG_XEN_EFI) += efi.o
diff --git a/arch/arm/xen/efi.c b/arch/arm/xen/efi.c
new file mode 100644
index 000000000..16db419f9
--- /dev/null
+++ b/arch/arm/xen/efi.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2015, Linaro Limited, Shannon Zhao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/efi.h>
+#include <xen/xen-ops.h>
+#include <asm/xen/xen-ops.h>
+
+/* Set XEN EFI runtime services function pointers. Other fields of struct efi,
+ * e.g. efi.systab, will be set like normal EFI.
+ */
+void __init xen_efi_runtime_setup(void)
+{
+	efi.get_time                 = xen_efi_get_time;
+	efi.set_time                 = xen_efi_set_time;
+	efi.get_wakeup_time          = xen_efi_get_wakeup_time;
+	efi.set_wakeup_time          = xen_efi_set_wakeup_time;
+	efi.get_variable             = xen_efi_get_variable;
+	efi.get_next_variable        = xen_efi_get_next_variable;
+	efi.set_variable             = xen_efi_set_variable;
+	efi.query_variable_info      = xen_efi_query_variable_info;
+	efi.update_capsule           = xen_efi_update_capsule;
+	efi.query_capsule_caps       = xen_efi_query_capsule_caps;
+	efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count;
+	efi.reset_system             = NULL; /* Functionality provided by Xen. */
+}
+EXPORT_SYMBOL_GPL(xen_efi_runtime_setup);
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 6c09cc440..f193414d0 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -14,17 +14,25 @@
 #include <xen/xen-ops.h>
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
+#include <asm/xen/xen-ops.h>
 #include <asm/system_misc.h>
+#include <asm/efi.h>
 #include <linux/interrupt.h>
 #include <linux/irqreturn.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_fdt.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/cpuidle.h>
 #include <linux/cpufreq.h>
 #include <linux/cpu.h>
 #include <linux/console.h>
+#include <linux/pvclock_gtod.h>
+#include <linux/time64.h>
+#include <linux/timekeeping.h>
+#include <linux/timekeeper_internal.h>
+#include <linux/acpi.h>
 
 #include <linux/mm.h>
 
@@ -41,70 +49,146 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info;
 DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
 static struct vcpu_info __percpu *xen_vcpu_info;
 
+/* Linux <-> Xen vCPU id mapping */
+DEFINE_PER_CPU(uint32_t, xen_vcpu_id);
+EXPORT_PER_CPU_SYMBOL(xen_vcpu_id);
+
 /* These are unused until we support booting "pre-ballooned" */
 unsigned long xen_released_pages;
 struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata;
 
-/* TODO: to be removed */
-__read_mostly int xen_have_vector_callback;
-EXPORT_SYMBOL_GPL(xen_have_vector_callback);
-
-int xen_platform_pci_unplug = XEN_UNPLUG_ALL;
-EXPORT_SYMBOL_GPL(xen_platform_pci_unplug);
-
 static __read_mostly unsigned int xen_events_irq;
 
-static __initdata struct device_node *xen_node;
-
-int xen_remap_domain_mfn_array(struct vm_area_struct *vma,
+int xen_remap_domain_gfn_array(struct vm_area_struct *vma,
 			       unsigned long addr,
-			       xen_pfn_t *mfn, int nr,
+			       xen_pfn_t *gfn, int nr,
 			       int *err_ptr, pgprot_t prot,
 			       unsigned domid,
 			       struct page **pages)
 {
-	return xen_xlate_remap_gfn_array(vma, addr, mfn, nr, err_ptr,
+	return xen_xlate_remap_gfn_array(vma, addr, gfn, nr, err_ptr,
 					 prot, domid, pages);
 }
-EXPORT_SYMBOL_GPL(xen_remap_domain_mfn_array);
+EXPORT_SYMBOL_GPL(xen_remap_domain_gfn_array);
 
 /* Not used by XENFEAT_auto_translated guests. */
-int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
+int xen_remap_domain_gfn_range(struct vm_area_struct *vma,
                               unsigned long addr,
-                              xen_pfn_t mfn, int nr,
+                              xen_pfn_t gfn, int nr,
                               pgprot_t prot, unsigned domid,
                               struct page **pages)
 {
 	return -ENOSYS;
 }
-EXPORT_SYMBOL_GPL(xen_remap_domain_mfn_range);
+EXPORT_SYMBOL_GPL(xen_remap_domain_gfn_range);
 
-int xen_unmap_domain_mfn_range(struct vm_area_struct *vma,
+int xen_unmap_domain_gfn_range(struct vm_area_struct *vma,
 			       int nr, struct page **pages)
 {
 	return xen_xlate_unmap_gfn_range(vma, nr, pages);
 }
-EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range);
+EXPORT_SYMBOL_GPL(xen_unmap_domain_gfn_range);
 
-static void xen_percpu_init(void)
+static void xen_read_wallclock(struct timespec64 *ts)
+{
+	u32 version;
+	struct timespec64 now, ts_monotonic;
+	struct shared_info *s = HYPERVISOR_shared_info;
+	struct pvclock_wall_clock *wall_clock = &(s->wc);
+
+	/* get wallclock at system boot */
+	do {
+		version = wall_clock->version;
+		rmb();		/* fetch version before time */
+		now.tv_sec  = ((uint64_t)wall_clock->sec_hi << 32) | wall_clock->sec;
+		now.tv_nsec = wall_clock->nsec;
+		rmb();		/* fetch time before checking version */
+	} while ((wall_clock->version & 1) || (version != wall_clock->version));
+
+	/* time since system boot */
+	ktime_get_ts64(&ts_monotonic);
+	*ts = timespec64_add(now, ts_monotonic);
+}
+
+static int xen_pvclock_gtod_notify(struct notifier_block *nb,
+				   unsigned long was_set, void *priv)
+{
+	/* Protected by the calling core code serialization */
+	static struct timespec64 next_sync;
+
+	struct xen_platform_op op;
+	struct timespec64 now, system_time;
+	struct timekeeper *tk = priv;
+
+	now.tv_sec = tk->xtime_sec;
+	now.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
+	system_time = timespec64_add(now, tk->wall_to_monotonic);
+
+	/*
+	 * We only take the expensive HV call when the clock was set
+	 * or when the 11 minutes RTC synchronization time elapsed.
+	 */
+	if (!was_set && timespec64_compare(&now, &next_sync) < 0)
+		return NOTIFY_OK;
+
+	op.cmd = XENPF_settime64;
+	op.u.settime64.mbz = 0;
+	op.u.settime64.secs = now.tv_sec;
+	op.u.settime64.nsecs = now.tv_nsec;
+	op.u.settime64.system_time = timespec64_to_ns(&system_time);
+	(void)HYPERVISOR_platform_op(&op);
+
+	/*
+	 * Move the next drift compensation time 11 minutes
+	 * ahead. That's emulating the sync_cmos_clock() update for
+	 * the hardware RTC.
+	 */
+	next_sync = now;
+	next_sync.tv_sec += 11 * 60;
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block xen_pvclock_gtod_notifier = {
+	.notifier_call = xen_pvclock_gtod_notify,
+};
+
+static int xen_starting_cpu(unsigned int cpu)
 {
 	struct vcpu_register_vcpu_info info;
 	struct vcpu_info *vcpup;
 	int err;
-	int cpu = get_cpu();
+
+	/* 
+	 * VCPUOP_register_vcpu_info cannot be called twice for the same
+	 * vcpu, so if vcpu_info is already registered, just get out. This
+	 * can happen with cpu-hotplug.
+	 */
+	if (per_cpu(xen_vcpu, cpu) != NULL)
+		goto after_register_vcpu_info;
 
 	pr_info("Xen: initializing cpu%d\n", cpu);
 	vcpup = per_cpu_ptr(xen_vcpu_info, cpu);
 
-	info.mfn = __pa(vcpup) >> PAGE_SHIFT;
-	info.offset = offset_in_page(vcpup);
+	info.mfn = virt_to_gfn(vcpup);
+	info.offset = xen_offset_in_page(vcpup);
 
-	err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info);
+	err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, xen_vcpu_nr(cpu),
+				 &info);
 	BUG_ON(err);
 	per_cpu(xen_vcpu, cpu) = vcpup;
 
+	xen_setup_runstate_info(cpu);
+
+after_register_vcpu_info:
 	enable_percpu_irq(xen_events_irq, 0);
-	put_cpu();
+	return 0;
+}
+
+static int xen_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(xen_events_irq);
+	return 0;
 }
 
 static void xen_restart(enum reboot_mode reboot_mode, const char *cmd)
@@ -123,29 +207,50 @@ static void xen_power_off(void)
 	BUG_ON(rc);
 }
 
-static int xen_cpu_notification(struct notifier_block *self,
-				unsigned long action,
-				void *hcpu)
+static irqreturn_t xen_arm_callback(int irq, void *arg)
 {
-	switch (action) {
-	case CPU_STARTING:
-		xen_percpu_init();
-		break;
-	default:
-		break;
-	}
-
-	return NOTIFY_OK;
+	xen_hvm_evtchn_do_upcall();
+	return IRQ_HANDLED;
 }
 
-static struct notifier_block xen_cpu_notifier = {
-	.notifier_call = xen_cpu_notification,
-};
+static __initdata struct {
+	const char *compat;
+	const char *prefix;
+	const char *version;
+	bool found;
+} hyper_node = {"xen,xen", "xen,xen-", NULL, false};
 
-static irqreturn_t xen_arm_callback(int irq, void *arg)
+static int __init fdt_find_hyper_node(unsigned long node, const char *uname,
+				      int depth, void *data)
 {
-	xen_hvm_evtchn_do_upcall();
-	return IRQ_HANDLED;
+	const void *s = NULL;
+	int len;
+
+	if (depth != 1 || strcmp(uname, "hypervisor") != 0)
+		return 0;
+
+	if (of_flat_dt_is_compatible(node, hyper_node.compat))
+		hyper_node.found = true;
+
+	s = of_get_flat_dt_prop(node, "compatible", &len);
+	if (strlen(hyper_node.prefix) + 3  < len &&
+	    !strncmp(hyper_node.prefix, s, strlen(hyper_node.prefix)))
+		hyper_node.version = s + strlen(hyper_node.prefix);
+
+	/*
+	 * Check if Xen supports EFI by checking whether there is the
+	 * "/hypervisor/uefi" node in DT. If so, runtime services are available
+	 * through proxy functions (e.g. in case of Xen dom0 EFI implementation
+	 * they call special hypercall which executes relevant EFI functions)
+	 * and that is why they are always enabled.
+	 */
+	if (IS_ENABLED(CONFIG_XEN_EFI)) {
+		if ((of_get_flat_dt_subnode_by_name(node, "uefi") > 0) &&
+		    !efi_runtime_disabled())
+			set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+	}
+
+	return 0;
 }
 
 /*
@@ -155,26 +260,18 @@ static irqreturn_t xen_arm_callback(int irq, void *arg)
 #define GRANT_TABLE_PHYSADDR 0
 void __init xen_early_init(void)
 {
-	int len;
-	const char *s = NULL;
-	const char *version = NULL;
-	const char *xen_prefix = "xen,xen-";
-
-	xen_node = of_find_compatible_node(NULL, NULL, "xen,xen");
-	if (!xen_node) {
+	of_scan_flat_dt(fdt_find_hyper_node, NULL);
+	if (!hyper_node.found) {
 		pr_debug("No Xen support\n");
 		return;
 	}
-	s = of_get_property(xen_node, "compatible", &len);
-	if (strlen(xen_prefix) + 3  < len &&
-			!strncmp(xen_prefix, s, strlen(xen_prefix)))
-		version = s + strlen(xen_prefix);
-	if (version == NULL) {
+
+	if (hyper_node.version == NULL) {
 		pr_debug("Xen version not found\n");
 		return;
 	}
 
-	pr_info("Xen %s support found\n", version);
+	pr_info("Xen %s support found\n", hyper_node.version);
 
 	xen_domain_type = XEN_HVM_DOMAIN;
 
@@ -189,28 +286,69 @@ void __init xen_early_init(void)
 		add_preferred_console("hvc", 0, NULL);
 }
 
+static void __init xen_acpi_guest_init(void)
+{
+#ifdef CONFIG_ACPI
+	struct xen_hvm_param a;
+	int interrupt, trigger, polarity;
+
+	a.domid = DOMID_SELF;
+	a.index = HVM_PARAM_CALLBACK_IRQ;
+
+	if (HYPERVISOR_hvm_op(HVMOP_get_param, &a)
+	    || (a.value >> 56) != HVM_PARAM_CALLBACK_TYPE_PPI) {
+		xen_events_irq = 0;
+		return;
+	}
+
+	interrupt = a.value & 0xff;
+	trigger = ((a.value >> 8) & 0x1) ? ACPI_EDGE_SENSITIVE
+					 : ACPI_LEVEL_SENSITIVE;
+	polarity = ((a.value >> 8) & 0x2) ? ACPI_ACTIVE_LOW
+					  : ACPI_ACTIVE_HIGH;
+	xen_events_irq = acpi_register_gsi(NULL, interrupt, trigger, polarity);
+#endif
+}
+
+static void __init xen_dt_guest_init(void)
+{
+	struct device_node *xen_node;
+
+	xen_node = of_find_compatible_node(NULL, NULL, "xen,xen");
+	if (!xen_node) {
+		pr_err("Xen support was detected before, but it has disappeared\n");
+		return;
+	}
+
+	xen_events_irq = irq_of_parse_and_map(xen_node, 0);
+}
+
 static int __init xen_guest_init(void)
 {
 	struct xen_add_to_physmap xatp;
 	struct shared_info *shared_info_page = NULL;
-	struct resource res;
-	phys_addr_t grant_frames;
+	int cpu;
 
 	if (!xen_domain())
 		return 0;
 
-	if (of_address_to_resource(xen_node, GRANT_TABLE_PHYSADDR, &res)) {
-		pr_err("Xen grant table base address not found\n");
-		return -ENODEV;
-	}
-	grant_frames = res.start;
+	if (!acpi_disabled)
+		xen_acpi_guest_init();
+	else
+		xen_dt_guest_init();
 
-	xen_events_irq = irq_of_parse_and_map(xen_node, 0);
 	if (!xen_events_irq) {
 		pr_err("Xen event channel interrupt not found\n");
 		return -ENODEV;
 	}
 
+	/*
+	 * The fdt parsing codes have set EFI_RUNTIME_SERVICES if Xen EFI
+	 * parameters are found. Force enable runtime services.
+	 */
+	if (efi_enabled(EFI_RUNTIME_SERVICES))
+		xen_efi_runtime_setup();
+
 	shared_info_page = (struct shared_info *)get_zeroed_page(GFP_KERNEL);
 
 	if (!shared_info_page) {
@@ -220,7 +358,7 @@ static int __init xen_guest_init(void)
 	xatp.domid = DOMID_SELF;
 	xatp.idx = 0;
 	xatp.space = XENMAPSPACE_shared_info;
-	xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT;
+	xatp.gpfn = virt_to_gfn(shared_info_page);
 	if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp))
 		BUG();
 
@@ -239,7 +377,14 @@ static int __init xen_guest_init(void)
 	if (xen_vcpu_info == NULL)
 		return -ENOMEM;
 
-	if (gnttab_setup_auto_xlat_frames(grant_frames)) {
+	/* Direct vCPU id mapping for ARM guests. */
+	for_each_possible_cpu(cpu)
+		per_cpu(xen_vcpu_id, cpu) = cpu;
+
+	xen_auto_xlat_grant_frames.count = gnttab_max_grant_frames();
+	if (xen_xlate_map_ballooned_pages(&xen_auto_xlat_grant_frames.pfn,
+					  &xen_auto_xlat_grant_frames.vaddr,
+					  xen_auto_xlat_grant_frames.count)) {
 		free_percpu(xen_vcpu_info);
 		return -ENOMEM;
 	}
@@ -262,11 +407,14 @@ static int __init xen_guest_init(void)
 		return -EINVAL;
 	}
 
-	xen_percpu_init();
+	xen_time_setup_guest();
 
-	register_cpu_notifier(&xen_cpu_notifier);
+	if (xen_initial_domain())
+		pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier);
 
-	return 0;
+	return cpuhp_setup_state(CPUHP_AP_ARM_XEN_STARTING,
+				 "AP_ARM_XEN_STARTING", xen_starting_cpu,
+				 xen_dying_cpu);
 }
 early_initcall(xen_guest_init);
 
@@ -277,6 +425,11 @@ static int __init xen_pm_init(void)
 
 	pm_power_off = xen_power_off;
 	arm_pm_restart = xen_restart;
+	if (!xen_initial_domain()) {
+		struct timespec64 ts;
+		xen_read_wallclock(&ts);
+		do_settimeofday64(&ts);
+	}
 
 	return 0;
 }
@@ -291,7 +444,7 @@ void xen_arch_resume(void) { }
 void xen_arch_suspend(void) { }
 
 
-/* In the hypervisor.S file. */
+/* In the hypercall.S file. */
 EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version);
@@ -302,5 +455,7 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_multicall);
+EXPORT_SYMBOL_GPL(HYPERVISOR_vm_assist);
 EXPORT_SYMBOL_GPL(privcmd_call);
diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S
index f00e08075..a648dfc3b 100644
--- a/arch/arm/xen/hypercall.S
+++ b/arch/arm/xen/hypercall.S
@@ -89,7 +89,9 @@ HYPERCALL2(memory_op);
 HYPERCALL2(physdev_op);
 HYPERCALL3(vcpu_op);
 HYPERCALL1(tmem_op);
+HYPERCALL1(platform_op_raw);
 HYPERCALL2(multicall);
+HYPERCALL2(vm_assist);
 
 ENTRY(privcmd_call)
 	stmdb sp!, {r4}
@@ -98,8 +100,23 @@ ENTRY(privcmd_call)
 	mov r1, r2
 	mov r2, r3
 	ldr r3, [sp, #8]
+	/*
+	 * Privcmd calls are issued by the userspace. We need to allow the
+	 * kernel to access the userspace memory before issuing the hypercall.
+	 */
+	uaccess_enable r4
+
+	/* r4 is loaded now as we use it as scratch register before */
 	ldr r4, [sp, #4]
 	__HVC(XEN_IMM)
+
+	/*
+	 * Disable userspace access from kernel. This is fine to do it
+	 * unconditionally as no set_fs(KERNEL_DS)/set_fs(get_ds()) is
+	 * called before.
+	 */
+	uaccess_disable r4
+
 	ldm sp!, {r4}
 	ret lr
 ENDPROC(privcmd_call);
diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index 03e75fef1..d062f08f5 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -25,7 +25,7 @@
 unsigned long xen_get_swiotlb_free_pages(unsigned int order)
 {
 	struct memblock_region *reg;
-	gfp_t flags = __GFP_NOWARN;
+	gfp_t flags = __GFP_NOWARN|__GFP_KSWAPD_RECLAIM;
 
 	for_each_memblock(memory, reg) {
 		if (reg->base < (phys_addr_t)0xffffffff) {
@@ -48,22 +48,22 @@ static void dma_cache_maint(dma_addr_t handle, unsigned long offset,
 	size_t size, enum dma_data_direction dir, enum dma_cache_op op)
 {
 	struct gnttab_cache_flush cflush;
-	unsigned long pfn;
+	unsigned long xen_pfn;
 	size_t left = size;
 
-	pfn = (handle >> PAGE_SHIFT) + offset / PAGE_SIZE;
-	offset %= PAGE_SIZE;
+	xen_pfn = (handle >> XEN_PAGE_SHIFT) + offset / XEN_PAGE_SIZE;
+	offset %= XEN_PAGE_SIZE;
 
 	do {
 		size_t len = left;
 	
 		/* buffers in highmem or foreign pages cannot cross page
 		 * boundaries */
-		if (len + offset > PAGE_SIZE)
-			len = PAGE_SIZE - offset;
+		if (len + offset > XEN_PAGE_SIZE)
+			len = XEN_PAGE_SIZE - offset;
 
 		cflush.op = 0;
-		cflush.a.dev_bus_addr = pfn << PAGE_SHIFT;
+		cflush.a.dev_bus_addr = xen_pfn << XEN_PAGE_SHIFT;
 		cflush.offset = offset;
 		cflush.length = len;
 
@@ -79,7 +79,7 @@ static void dma_cache_maint(dma_addr_t handle, unsigned long offset,
 			HYPERVISOR_grant_table_op(GNTTABOP_cache_flush, &cflush, 1);
 
 		offset = 0;
-		pfn++;
+		xen_pfn++;
 		left -= len;
 	} while (left);
 }
@@ -98,11 +98,11 @@ static void __xen_dma_page_cpu_to_dev(struct device *hwdev, dma_addr_t handle,
 
 void __xen_dma_map_page(struct device *hwdev, struct page *page,
 	     dma_addr_t dev_addr, unsigned long offset, size_t size,
-	     enum dma_data_direction dir, struct dma_attrs *attrs)
+	     enum dma_data_direction dir, unsigned long attrs)
 {
 	if (is_device_dma_coherent(hwdev))
 		return;
-	if (dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
 		return;
 
 	__xen_dma_page_cpu_to_dev(hwdev, dev_addr, size, dir);
@@ -110,12 +110,12 @@ void __xen_dma_map_page(struct device *hwdev, struct page *page,
 
 void __xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir,
-		struct dma_attrs *attrs)
+		unsigned long attrs)
 
 {
 	if (is_device_dma_coherent(hwdev))
 		return;
-	if (dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
 		return;
 
 	__xen_dma_page_dev_to_cpu(hwdev, handle, size, dir);
@@ -138,10 +138,29 @@ void __xen_dma_sync_single_for_device(struct device *hwdev,
 }
 
 bool xen_arch_need_swiotlb(struct device *dev,
-			   unsigned long pfn,
-			   unsigned long mfn)
+			   phys_addr_t phys,
+			   dma_addr_t dev_addr)
 {
-	return (!hypercall_cflush && (pfn != mfn) && !is_device_dma_coherent(dev));
+	unsigned int xen_pfn = XEN_PFN_DOWN(phys);
+	unsigned int bfn = XEN_PFN_DOWN(dev_addr);
+
+	/*
+	 * The swiotlb buffer should be used if
+	 *	- Xen doesn't have the cache flush hypercall
+	 *	- The Linux page refers to foreign memory
+	 *	- The device doesn't support coherent DMA request
+	 *
+	 * The Linux page may be spanned acrros multiple Xen page, although
+	 * it's not possible to have a mix of local and foreign Xen page.
+	 * Furthermore, range_straddles_page_boundary is already checking
+	 * if buffer is physically contiguous in the host RAM.
+	 *
+	 * Therefore we only need to check the first Xen page to know if we
+	 * require a bounce buffer because the device doesn't support coherent
+	 * memory and we are not able to flush the cache.
+	 */
+	return (!hypercall_cflush && (xen_pfn != bfn) &&
+		!is_device_dma_coherent(dev));
 }
 
 int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c
index 887596c67..0ed01f2d5 100644
--- a/arch/arm/xen/p2m.c
+++ b/arch/arm/xen/p2m.c
@@ -93,8 +93,8 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
 	for (i = 0; i < count; i++) {
 		if (map_ops[i].status)
 			continue;
-		set_phys_to_machine(map_ops[i].host_addr >> PAGE_SHIFT,
-				    map_ops[i].dev_bus_addr >> PAGE_SHIFT);
+		set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT,
+				    map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT);
 	}
 
 	return 0;
@@ -108,7 +108,7 @@ int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops,
 	int i;
 
 	for (i = 0; i < count; i++) {
-		set_phys_to_machine(unmap_ops[i].host_addr >> PAGE_SHIFT,
+		set_phys_to_machine(unmap_ops[i].host_addr >> XEN_PAGE_SHIFT,
 				    INVALID_P2M_ENTRY);
 	}