summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/83xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/83xx')
-rw-r--r--arch/powerpc/platforms/83xx/Kconfig133
-rw-r--r--arch/powerpc/platforms/83xx/Makefile19
-rw-r--r--arch/powerpc/platforms/83xx/asp834x.c60
-rw-r--r--arch/powerpc/platforms/83xx/km83xx.c197
-rw-r--r--arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c238
-rw-r--r--arch/powerpc/platforms/83xx/misc.c144
-rw-r--r--arch/powerpc/platforms/83xx/mpc830x_rdb.c64
-rw-r--r--arch/powerpc/platforms/83xx/mpc831x_rdb.c64
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_mds.c122
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_rdb.c240
-rw-r--r--arch/powerpc/platforms/83xx/mpc834x_itx.c88
-rw-r--r--arch/powerpc/platforms/83xx/mpc834x_mds.c109
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_mds.c229
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_rdk.c63
-rw-r--r--arch/powerpc/platforms/83xx/mpc837x_mds.c111
-rw-r--r--arch/powerpc/platforms/83xx/mpc837x_rdb.c89
-rw-r--r--arch/powerpc/platforms/83xx/mpc83xx.h90
-rw-r--r--arch/powerpc/platforms/83xx/sbc834x.c78
-rw-r--r--arch/powerpc/platforms/83xx/suspend-asm.S533
-rw-r--r--arch/powerpc/platforms/83xx/suspend.c449
-rw-r--r--arch/powerpc/platforms/83xx/usb.c253
21 files changed, 3373 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
new file mode 100644
index 000000000..2bdc8c862
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -0,0 +1,133 @@
+menuconfig PPC_83xx
+ bool "83xx-based boards"
+ depends on 6xx
+ select PPC_UDBG_16550
+ select PPC_PCI_CHOICE
+ select FSL_PCI if PCI
+ select FSL_SOC
+ select IPIC
+
+if PPC_83xx
+
+config MPC830x_RDB
+ bool "Freescale MPC830x RDB and derivatives"
+ select DEFAULT_UIMAGE
+ select PPC_MPC831x
+ select FSL_GTM
+ help
+ This option enables support for the MPC8308 RDB and MPC8308 P1M boards.
+
+config MPC831x_RDB
+ bool "Freescale MPC831x RDB"
+ select DEFAULT_UIMAGE
+ select PPC_MPC831x
+ help
+ This option enables support for the MPC8313 RDB and MPC8315 RDB boards.
+
+config MPC832x_MDS
+ bool "Freescale MPC832x MDS"
+ select DEFAULT_UIMAGE
+ select PPC_MPC832x
+ help
+ This option enables support for the MPC832x MDS evaluation board.
+
+config MPC832x_RDB
+ bool "Freescale MPC832x RDB"
+ select DEFAULT_UIMAGE
+ select PPC_MPC832x
+ help
+ This option enables support for the MPC8323 RDB board.
+
+config MPC834x_MDS
+ bool "Freescale MPC834x MDS"
+ select DEFAULT_UIMAGE
+ select PPC_MPC834x
+ help
+ This option enables support for the MPC 834x MDS evaluation board.
+
+ Be aware that PCI buses can only function when MDS board is plugged
+ into the PIB (Platform IO Board) board from Freescale which provide
+ 3 PCI slots. The PIBs PCI initialization is the bootloader's
+ responsibility.
+
+config MPC834x_ITX
+ bool "Freescale MPC834x ITX"
+ select DEFAULT_UIMAGE
+ select PPC_MPC834x
+ help
+ This option enables support for the MPC 834x ITX evaluation board.
+
+ Be aware that PCI initialization is the bootloader's
+ responsibility.
+
+config MPC836x_MDS
+ bool "Freescale MPC836x MDS"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the MPC836x MDS Processor Board.
+
+config MPC836x_RDK
+ bool "Freescale/Logic MPC836x RDK"
+ select DEFAULT_UIMAGE
+ select FSL_GTM
+ select FSL_LBC
+ help
+ This option enables support for the MPC836x RDK Processor Board,
+ also known as ZOOM PowerQUICC Kit.
+
+config MPC837x_MDS
+ bool "Freescale MPC837x MDS"
+ select DEFAULT_UIMAGE
+ select PPC_MPC837x
+ help
+ This option enables support for the MPC837x MDS Processor Board.
+
+config MPC837x_RDB
+ bool "Freescale MPC837x RDB/WLAN"
+ select DEFAULT_UIMAGE
+ select PPC_MPC837x
+ help
+ This option enables support for the MPC837x RDB and WLAN Boards.
+
+config SBC834x
+ bool "Wind River SBC834x"
+ select DEFAULT_UIMAGE
+ select PPC_MPC834x
+ help
+ This option enables support for the Wind River SBC834x board.
+
+config ASP834x
+ bool "Analogue & Micro ASP 834x"
+ select PPC_MPC834x
+ help
+ This enables support for the Analogue & Micro ASP 83xx
+ board.
+
+config KMETER1
+ bool "Keymile KMETER1"
+ select DEFAULT_UIMAGE
+ select QUICC_ENGINE
+ help
+ This enables support for the Keymile KMETER1 board.
+
+
+endif
+
+# used for usb & gpio
+config PPC_MPC831x
+ bool
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+
+# used for math-emu
+config PPC_MPC832x
+ bool
+
+# used for usb & gpio
+config PPC_MPC834x
+ bool
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+
+# used for usb & gpio
+config PPC_MPC837x
+ bool
+ select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
new file mode 100644
index 000000000..ed95bfcbc
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for the PowerPC 83xx linux kernel.
+#
+obj-y := misc.o usb.o
+obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o
+obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
+obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o
+obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
+obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
+obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
+obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
+obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o
+obj-$(CONFIG_MPC836x_RDK) += mpc836x_rdk.o
+obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
+obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o
+obj-$(CONFIG_SBC834x) += sbc834x.o
+obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o
+obj-$(CONFIG_ASP834x) += asp834x.o
+obj-$(CONFIG_KMETER1) += km83xx.o
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
new file mode 100644
index 000000000..464ea8e02
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -0,0 +1,60 @@
+/*
+ * arch/powerpc/platforms/83xx/asp834x.c
+ *
+ * Analogue & Micro ASP8347 board specific routines
+ * clone of mpc834x_itx
+ *
+ * Copyright 2008 Codehermit
+ *
+ * Maintainer: Bryan O'Donoghue <bodonoghue@codhermit.ie>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+
+#include "mpc83xx.h"
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init asp834x_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("asp834x_setup_arch()", 0);
+
+ mpc834x_usb_cfg();
+}
+
+machine_device_initcall(asp834x, mpc83xx_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init asp834x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "analogue-and-micro,asp8347e");
+}
+
+define_machine(asp834x) {
+ .name = "ASP8347E",
+ .probe = asp834x_probe,
+ .setup_arch = asp834x_setup_arch,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
new file mode 100644
index 000000000..bf4c4473a
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2008-2011 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * Description:
+ * Keymile 83xx platform specific routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
+#include <linux/atomic.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+
+#include "mpc83xx.h"
+
+#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */
+
+static void quirk_mpc8360e_qe_enet10(void)
+{
+ /*
+ * handle mpc8360E Erratum QE_ENET10:
+ * RGMII AC values do not meet the specification
+ */
+ uint svid = mfspr(SPRN_SVR);
+ struct device_node *np_par;
+ struct resource res;
+ void __iomem *base;
+ int ret;
+
+ np_par = of_find_node_by_name(NULL, "par_io");
+ if (np_par == NULL) {
+ pr_warn("%s couldn;t find par_io node\n", __func__);
+ return;
+ }
+ /* Map Parallel I/O ports registers */
+ ret = of_address_to_resource(np_par, 0, &res);
+ if (ret) {
+ pr_warn("%s couldn;t map par_io registers\n", __func__);
+ return;
+ }
+
+ base = ioremap(res.start, res.end - res.start + 1);
+
+ /*
+ * set output delay adjustments to default values according
+ * table 5 in Errata Rev. 5, 9/2011:
+ *
+ * write 0b01 to UCC1 bits 18:19
+ * write 0b01 to UCC2 option 1 bits 4:5
+ * write 0b01 to UCC2 option 2 bits 16:17
+ */
+ clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);
+
+ /*
+ * set output delay adjustments to default values according
+ * table 3-13 in Reference Manual Rev.3 05/2010:
+ *
+ * write 0b01 to UCC2 option 2 bits 16:17
+ * write 0b0101 to UCC1 bits 20:23
+ * write 0b0101 to UCC2 option 1 bits 24:27
+ */
+ clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);
+
+ if (SVR_REV(svid) == 0x0021) {
+ /*
+ * UCC2 option 1: write 0b1010 to bits 24:27
+ * at address IMMRBAR+0x14AC
+ */
+ clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
+ } else if (SVR_REV(svid) == 0x0020) {
+ /*
+ * UCC1: write 0b11 to bits 18:19
+ * at address IMMRBAR+0x14A8
+ */
+ setbits32((base + 0xa8), 0x00003000);
+
+ /*
+ * UCC2 option 1: write 0b11 to bits 4:5
+ * at address IMMRBAR+0x14A8
+ */
+ setbits32((base + 0xa8), 0x0c000000);
+
+ /*
+ * UCC2 option 2: write 0b11 to bits 16:17
+ * at address IMMRBAR+0x14AC
+ */
+ setbits32((base + 0xac), 0x0000c000);
+ }
+ iounmap(base);
+ of_node_put(np_par);
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc83xx_km_setup_arch(void)
+{
+#ifdef CONFIG_QUICC_ENGINE
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("kmpbec83xx_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+
+#ifdef CONFIG_QUICC_ENGINE
+ qe_reset();
+
+ np = of_find_node_by_name(NULL, "par_io");
+ if (np != NULL) {
+ par_io_init(np);
+ of_node_put(np);
+
+ for_each_node_by_name(np, "spi")
+ par_io_of_config(np);
+
+ for_each_node_by_name(np, "ucc")
+ par_io_of_config(np);
+
+ /* Only apply this quirk when par_io is available */
+ np = of_find_compatible_node(NULL, "network", "ucc_geth");
+ if (np != NULL) {
+ quirk_mpc8360e_qe_enet10();
+ of_node_put(np);
+ }
+ }
+#endif /* CONFIG_QUICC_ENGINE */
+}
+
+machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
+
+/* list of the supported boards */
+static char *board[] __initdata = {
+ "Keymile,KMETER1",
+ "Keymile,kmpbec8321",
+ NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc83xx_km_probe(void)
+{
+ unsigned long node = of_get_flat_dt_root();
+ int i = 0;
+
+ while (board[i]) {
+ if (of_flat_dt_is_compatible(node, board[i]))
+ break;
+ i++;
+ }
+ return (board[i] != NULL);
+}
+
+define_machine(mpc83xx_km) {
+ .name = "mpc83xx-km-platform",
+ .probe = mpc83xx_km_probe,
+ .setup_arch = mpc83xx_km_setup_arch,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
new file mode 100644
index 000000000..15e8021dd
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
@@ -0,0 +1,238 @@
+/*
+ * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU
+ *
+ * Copyright (c) 2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/reboot.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+
+/*
+ * I don't have specifications for the MCU firmware, I found this register
+ * and bits positions by the trial&error method.
+ */
+#define MCU_REG_CTRL 0x20
+#define MCU_CTRL_POFF 0x40
+#define MCU_CTRL_BTN 0x80
+
+#define MCU_NUM_GPIO 2
+
+struct mcu {
+ struct mutex lock;
+ struct i2c_client *client;
+ struct gpio_chip gc;
+ u8 reg_ctrl;
+};
+
+static struct mcu *glob_mcu;
+
+struct task_struct *shutdown_thread;
+static int shutdown_thread_fn(void *data)
+{
+ int ret;
+ struct mcu *mcu = glob_mcu;
+
+ while (!kthread_should_stop()) {
+ ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+ if (ret < 0)
+ pr_err("MCU status reg read failed.\n");
+ mcu->reg_ctrl = ret;
+
+
+ if (mcu->reg_ctrl & MCU_CTRL_BTN) {
+ i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL,
+ mcu->reg_ctrl & ~MCU_CTRL_BTN);
+
+ ctrl_alt_del();
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+ return 0;
+}
+
+static ssize_t show_status(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ struct mcu *mcu = glob_mcu;
+
+ ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+ if (ret < 0)
+ return -ENODEV;
+ mcu->reg_ctrl = ret;
+
+ return sprintf(buf, "%02x\n", ret);
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
+static void mcu_power_off(void)
+{
+ struct mcu *mcu = glob_mcu;
+
+ pr_info("Sending power-off request to the MCU...\n");
+ mutex_lock(&mcu->lock);
+ i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL,
+ mcu->reg_ctrl | MCU_CTRL_POFF);
+ mutex_unlock(&mcu->lock);
+}
+
+static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct mcu *mcu = container_of(gc, struct mcu, gc);
+ u8 bit = 1 << (4 + gpio);
+
+ mutex_lock(&mcu->lock);
+ if (val)
+ mcu->reg_ctrl &= ~bit;
+ else
+ mcu->reg_ctrl |= bit;
+
+ i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl);
+ mutex_unlock(&mcu->lock);
+}
+
+static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ mcu_gpio_set(gc, gpio, val);
+ return 0;
+}
+
+static int mcu_gpiochip_add(struct mcu *mcu)
+{
+ struct device_node *np;
+ struct gpio_chip *gc = &mcu->gc;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx");
+ if (!np)
+ return -ENODEV;
+
+ gc->owner = THIS_MODULE;
+ gc->label = np->full_name;
+ gc->can_sleep = 1;
+ gc->ngpio = MCU_NUM_GPIO;
+ gc->base = -1;
+ gc->set = mcu_gpio_set;
+ gc->direction_output = mcu_gpio_dir_out;
+ gc->of_node = np;
+
+ return gpiochip_add(gc);
+}
+
+static int mcu_gpiochip_remove(struct mcu *mcu)
+{
+ gpiochip_remove(&mcu->gc);
+ return 0;
+}
+
+static int mcu_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct mcu *mcu;
+ int ret;
+
+ mcu = kzalloc(sizeof(*mcu), GFP_KERNEL);
+ if (!mcu)
+ return -ENOMEM;
+
+ mutex_init(&mcu->lock);
+ mcu->client = client;
+ i2c_set_clientdata(client, mcu);
+
+ ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+ if (ret < 0)
+ goto err;
+ mcu->reg_ctrl = ret;
+
+ ret = mcu_gpiochip_add(mcu);
+ if (ret)
+ goto err;
+
+ /* XXX: this is potentially racy, but there is no lock for pm_power_off */
+ if (!pm_power_off) {
+ glob_mcu = mcu;
+ pm_power_off = mcu_power_off;
+ dev_info(&client->dev, "will provide power-off service\n");
+ }
+
+ if (device_create_file(&client->dev, &dev_attr_status))
+ dev_err(&client->dev,
+ "couldn't create device file for status\n");
+
+ shutdown_thread = kthread_run(shutdown_thread_fn, NULL,
+ "mcu-i2c-shdn");
+
+ return 0;
+err:
+ kfree(mcu);
+ return ret;
+}
+
+static int mcu_remove(struct i2c_client *client)
+{
+ struct mcu *mcu = i2c_get_clientdata(client);
+ int ret;
+
+ kthread_stop(shutdown_thread);
+
+ device_remove_file(&client->dev, &dev_attr_status);
+
+ if (glob_mcu == mcu) {
+ pm_power_off = NULL;
+ glob_mcu = NULL;
+ }
+
+ ret = mcu_gpiochip_remove(mcu);
+ if (ret)
+ return ret;
+ kfree(mcu);
+ return 0;
+}
+
+static const struct i2c_device_id mcu_ids[] = {
+ { "mcu-mpc8349emitx", },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, mcu_ids);
+
+static const struct of_device_id mcu_of_match_table[] = {
+ { .compatible = "fsl,mcu-mpc8349emitx", },
+ { },
+};
+
+static struct i2c_driver mcu_driver = {
+ .driver = {
+ .name = "mcu-mpc8349emitx",
+ .owner = THIS_MODULE,
+ .of_match_table = mcu_of_match_table,
+ },
+ .probe = mcu_probe,
+ .remove = mcu_remove,
+ .id_table = mcu_ids,
+};
+
+module_i2c_driver(mcu_driver);
+
+MODULE_DESCRIPTION("Power Management and GPIO expander driver for "
+ "MPC8349E-mITX-compatible MCU");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
new file mode 100644
index 000000000..ef9d01a04
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -0,0 +1,144 @@
+/*
+ * misc setup functions for MPC83xx
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+
+#include <asm/io.h>
+#include <asm/hw_irq.h>
+#include <asm/ipic.h>
+#include <asm/qe_ic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+static __be32 __iomem *restart_reg_base;
+
+static int __init mpc83xx_restart_init(void)
+{
+ /* map reset restart_reg_baseister space */
+ restart_reg_base = ioremap(get_immrbase() + 0x900, 0xff);
+
+ return 0;
+}
+
+arch_initcall(mpc83xx_restart_init);
+
+void mpc83xx_restart(char *cmd)
+{
+#define RST_OFFSET 0x00000900
+#define RST_PROT_REG 0x00000018
+#define RST_CTRL_REG 0x0000001c
+
+ local_irq_disable();
+
+ if (restart_reg_base) {
+ /* enable software reset "RSTE" */
+ out_be32(restart_reg_base + (RST_PROT_REG >> 2), 0x52535445);
+
+ /* set software hard reset */
+ out_be32(restart_reg_base + (RST_CTRL_REG >> 2), 0x2);
+ } else {
+ printk (KERN_EMERG "Error: Restart registers not mapped, spinning!\n");
+ }
+
+ for (;;) ;
+}
+
+long __init mpc83xx_time_init(void)
+{
+#define SPCR_OFFSET 0x00000110
+#define SPCR_TBEN 0x00400000
+ __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4);
+ __be32 tmp;
+
+ tmp = in_be32(spcr);
+ out_be32(spcr, tmp | SPCR_TBEN);
+
+ iounmap(spcr);
+
+ return 0;
+}
+
+void __init mpc83xx_ipic_init_IRQ(void)
+{
+ struct device_node *np;
+
+ /* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */
+ np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+ if (!np)
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ of_node_put(np);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+#ifdef CONFIG_QUICC_ENGINE
+void __init mpc83xx_qe_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (!np) {
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+ }
+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+ of_node_put(np);
+}
+
+void __init mpc83xx_ipic_and_qe_init_IRQ(void)
+{
+ mpc83xx_ipic_init_IRQ();
+ mpc83xx_qe_init_IRQ();
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus" },
+ { .compatible = "gianfar" },
+ { .compatible = "gpio-leds", },
+ { .type = "qe", },
+ { .compatible = "fsl,qe", },
+ {},
+};
+
+int __init mpc83xx_declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+void __init mpc83xx_setup_pci(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+ mpc83xx_add_bridge(np);
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
+}
+#endif
diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
new file mode 100644
index 000000000..4f2d9fea7
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
@@ -0,0 +1,64 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc830x_rdb.c
+ *
+ * Description: MPC830x RDB board specific routines.
+ * This file is based on mpc831x_rdb.c
+ *
+ * Copyright (C) Freescale Semiconductor, Inc. 2009. All rights reserved.
+ * Copyright (C) 2010. Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+#include "mpc83xx.h"
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc830x_rdb_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+ mpc831x_usb_cfg();
+}
+
+static const char *board[] __initdata = {
+ "MPC8308RDB",
+ "fsl,mpc8308rdb",
+ "denx,mpc8308_p1m",
+ NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc830x_rdb_probe(void)
+{
+ return of_flat_dt_match(of_get_flat_dt_root(), board);
+}
+
+machine_device_initcall(mpc830x_rdb, mpc83xx_declare_of_platform_devices);
+
+define_machine(mpc830x_rdb) {
+ .name = "MPC830x RDB",
+ .probe = mpc830x_rdb_probe,
+ .setup_arch = mpc830x_rdb_setup_arch,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
new file mode 100644
index 000000000..fa25977c5
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -0,0 +1,64 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc831x_rdb.c
+ *
+ * Description: MPC831x RDB board specific routines.
+ * This file is based on mpc834x_sys.c
+ * Author: Lo Wlison <r43300@freescale.com>
+ *
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc831x_rdb_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc831x_rdb_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+ mpc831x_usb_cfg();
+}
+
+static const char *board[] __initdata = {
+ "MPC8313ERDB",
+ "fsl,mpc8315erdb",
+ NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc831x_rdb_probe(void)
+{
+ return of_flat_dt_match(of_get_flat_dt_root(), board);
+}
+
+machine_device_initcall(mpc831x_rdb, mpc83xx_declare_of_platform_devices);
+
+define_machine(mpc831x_rdb) {
+ .name = "MPC831x RDB",
+ .probe = mpc831x_rdb_probe,
+ .setup_arch = mpc831x_rdb_setup_arch,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
new file mode 100644
index 000000000..8d762203e
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Description:
+ * MPC832xE MDS board specific routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
+#include <linux/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+
+#include "mpc83xx.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc832x_sys_setup_arch(void)
+{
+ struct device_node *np;
+ u8 __iomem *bcsr_regs = NULL;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc832x_sys_setup_arch()", 0);
+
+ /* Map BCSR area */
+ np = of_find_node_by_name(NULL, "bcsr");
+ if (np) {
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ bcsr_regs = ioremap(res.start, resource_size(&res));
+ of_node_put(np);
+ }
+
+ mpc83xx_setup_pci();
+
+#ifdef CONFIG_QUICC_ENGINE
+ qe_reset();
+
+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
+ par_io_init(np);
+ of_node_put(np);
+
+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+ par_io_of_config(np);
+ }
+
+ if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
+ != NULL){
+ /* Reset the Ethernet PHYs */
+#define BCSR8_FETH_RST 0x50
+ clrbits8(&bcsr_regs[8], BCSR8_FETH_RST);
+ udelay(1000);
+ setbits8(&bcsr_regs[8], BCSR8_FETH_RST);
+ iounmap(bcsr_regs);
+ of_node_put(np);
+ }
+#endif /* CONFIG_QUICC_ENGINE */
+}
+
+machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc832x_sys_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC832xMDS");
+}
+
+define_machine(mpc832x_mds) {
+ .name = "MPC832x MDS",
+ .probe = mpc832x_sys_probe,
+ .setup_arch = mpc832x_sys_setup_arch,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
new file mode 100644
index 000000000..eff5baabc
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -0,0 +1,240 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc832x_rdb.c
+ *
+ * Copyright (C) Freescale Semiconductor, Inc. 2007. All rights reserved.
+ *
+ * Description:
+ * MPC832x RDB board specific routines.
+ * This file is based on mpc832x_mds.c and mpc8313_rdb.c
+ * Author: Michael Barkowski <michael.barkowski@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+#include <linux/of_platform.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
+ struct spi_board_info *board_infos,
+ unsigned int num_board_infos,
+ void (*cs_control)(struct spi_device *dev,
+ bool on))
+{
+ struct device_node *np;
+ unsigned int i = 0;
+
+ for_each_compatible_node(np, type, compatible) {
+ int ret;
+ unsigned int j;
+ const void *prop;
+ struct resource res[2];
+ struct platform_device *pdev;
+ struct fsl_spi_platform_data pdata = {
+ .cs_control = cs_control,
+ };
+
+ memset(res, 0, sizeof(res));
+
+ pdata.sysclk = sysclk;
+
+ prop = of_get_property(np, "reg", NULL);
+ if (!prop)
+ goto err;
+ pdata.bus_num = *(u32 *)prop;
+
+ prop = of_get_property(np, "cell-index", NULL);
+ if (prop)
+ i = *(u32 *)prop;
+
+ prop = of_get_property(np, "mode", NULL);
+ if (prop && !strcmp(prop, "cpu-qe"))
+ pdata.flags = SPI_QE_CPU_MODE;
+
+ for (j = 0; j < num_board_infos; j++) {
+ if (board_infos[j].bus_num == pdata.bus_num)
+ pdata.max_chipselect++;
+ }
+
+ if (!pdata.max_chipselect)
+ continue;
+
+ ret = of_address_to_resource(np, 0, &res[0]);
+ if (ret)
+ goto err;
+
+ ret = of_irq_to_resource(np, 0, &res[1]);
+ if (ret == NO_IRQ)
+ goto err;
+
+ pdev = platform_device_alloc("mpc83xx_spi", i);
+ if (!pdev)
+ goto err;
+
+ ret = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+ if (ret)
+ goto unreg;
+
+ ret = platform_device_add_resources(pdev, res,
+ ARRAY_SIZE(res));
+ if (ret)
+ goto unreg;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto unreg;
+
+ goto next;
+unreg:
+ platform_device_del(pdev);
+err:
+ pr_err("%s: registration failed\n", np->full_name);
+next:
+ i++;
+ }
+
+ return i;
+}
+
+static int __init fsl_spi_init(struct spi_board_info *board_infos,
+ unsigned int num_board_infos,
+ void (*cs_control)(struct spi_device *spi,
+ bool on))
+{
+ u32 sysclk = -1;
+ int ret;
+
+ /* SPI controller is either clocked from QE or SoC clock */
+ sysclk = get_brgfreq();
+ if (sysclk == -1) {
+ sysclk = fsl_get_sys_freq();
+ if (sysclk == -1)
+ return -ENODEV;
+ }
+
+ ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
+ num_board_infos, cs_control);
+ if (!ret)
+ of_fsl_spi_probe("spi", "fsl_spi", sysclk, board_infos,
+ num_board_infos, cs_control);
+
+ return spi_register_board_info(board_infos, num_board_infos);
+}
+
+static void mpc83xx_spi_cs_control(struct spi_device *spi, bool on)
+{
+ pr_debug("%s %d %d\n", __func__, spi->chip_select, on);
+ par_io_data_set(3, 13, on);
+}
+
+static struct mmc_spi_platform_data mpc832x_mmc_pdata = {
+ .ocr_mask = MMC_VDD_33_34,
+};
+
+static struct spi_board_info mpc832x_spi_boardinfo = {
+ .bus_num = 0x4c0,
+ .chip_select = 0,
+ .max_speed_hz = 50000000,
+ .modalias = "mmc_spi",
+ .platform_data = &mpc832x_mmc_pdata,
+};
+
+static int __init mpc832x_spi_init(void)
+{
+ par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */
+ par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */
+ par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */
+ par_io_config_pin(3, 3, 2, 0, 1, 0); /* SPI1 SEL, I */
+
+ par_io_config_pin(3, 13, 1, 0, 0, 0); /* !SD_CS, O */
+ par_io_config_pin(3, 14, 2, 0, 0, 0); /* SD_INSERT, I */
+ par_io_config_pin(3, 15, 2, 0, 0, 0); /* SD_PROTECT,I */
+
+ /*
+ * Don't bother with legacy stuff when device tree contains
+ * mmc-spi-slot node.
+ */
+ if (of_find_compatible_node(NULL, NULL, "mmc-spi-slot"))
+ return 0;
+ return fsl_spi_init(&mpc832x_spi_boardinfo, 1, mpc83xx_spi_cs_control);
+}
+machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc832x_rdb_setup_arch(void)
+{
+#if defined(CONFIG_QUICC_ENGINE)
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc832x_rdb_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+
+#ifdef CONFIG_QUICC_ENGINE
+ qe_reset();
+
+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
+ par_io_init(np);
+ of_node_put(np);
+
+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+ par_io_of_config(np);
+ }
+#endif /* CONFIG_QUICC_ENGINE */
+}
+
+machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc832x_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC832xRDB");
+}
+
+define_machine(mpc832x_rdb) {
+ .name = "MPC832x RDB",
+ .probe = mpc832x_rdb_probe,
+ .setup_arch = mpc832x_rdb_setup_arch,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
new file mode 100644
index 000000000..80aea8c4b
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -0,0 +1,88 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc834x_itx.c
+ *
+ * MPC834x ITX board specific routines
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/of_platform.h>
+
+#include <linux/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+static const struct of_device_id mpc834x_itx_ids[] __initconst = {
+ { .compatible = "fsl,pq2pro-localbus", },
+ {},
+};
+
+static int __init mpc834x_itx_declare_of_platform_devices(void)
+{
+ mpc83xx_declare_of_platform_devices();
+ return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
+}
+machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc834x_itx_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc834x_itx_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+
+ mpc834x_usb_cfg();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc834x_itx_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC834xMITX");
+}
+
+define_machine(mpc834x_itx) {
+ .name = "MPC834x ITX",
+ .probe = mpc834x_itx_probe,
+ .setup_arch = mpc834x_itx_setup_arch,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
new file mode 100644
index 000000000..553e793a4
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -0,0 +1,109 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc834x_mds.c
+ *
+ * MPC834x MDS board specific routines
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/of_platform.h>
+
+#include <linux/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+#define BCSR5_INT_USB 0x02
+static int mpc834xemds_usb_cfg(void)
+{
+ struct device_node *np;
+ void __iomem *bcsr_regs = NULL;
+ u8 bcsr5;
+
+ mpc834x_usb_cfg();
+ /* Map BCSR area */
+ np = of_find_node_by_name(NULL, "bcsr");
+ if (np) {
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ bcsr_regs = ioremap(res.start, resource_size(&res));
+ of_node_put(np);
+ }
+ if (!bcsr_regs)
+ return -1;
+
+ /*
+ * if Processor Board is plugged into PIB board,
+ * force to use the PHY on Processor Board
+ */
+ bcsr5 = in_8(bcsr_regs + 5);
+ if (!(bcsr5 & BCSR5_INT_USB))
+ out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB));
+ iounmap(bcsr_regs);
+ return 0;
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc834x_mds_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc834x_mds_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+
+ mpc834xemds_usb_cfg();
+}
+
+machine_device_initcall(mpc834x_mds, mpc83xx_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc834x_mds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC834xMDS");
+}
+
+define_machine(mpc834x_mds) {
+ .name = "MPC834x MDS",
+ .probe = mpc834x_mds_probe,
+ .setup_arch = mpc834x_mds_setup_arch,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
new file mode 100644
index 000000000..1a26d2f83
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Yin Olivia <Hong-hua.Yin@freescale.com>
+ *
+ * Description:
+ * MPC8360E MDS board specific routines.
+ *
+ * Changelog:
+ * Jun 21, 2006 Initial version
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
+#include <linux/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <sysdev/simple_gpio.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+
+#include "mpc83xx.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc836x_mds_setup_arch(void)
+{
+ struct device_node *np;
+ u8 __iomem *bcsr_regs = NULL;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc836x_mds_setup_arch()", 0);
+
+ /* Map BCSR area */
+ np = of_find_node_by_name(NULL, "bcsr");
+ if (np) {
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ bcsr_regs = ioremap(res.start, resource_size(&res));
+ of_node_put(np);
+ }
+
+ mpc83xx_setup_pci();
+
+#ifdef CONFIG_QUICC_ENGINE
+ qe_reset();
+
+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
+ par_io_init(np);
+ of_node_put(np);
+
+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+ par_io_of_config(np);
+#ifdef CONFIG_QE_USB
+ /* Must fixup Par IO before QE GPIO chips are registered. */
+ par_io_config_pin(1, 2, 1, 0, 3, 0); /* USBOE */
+ par_io_config_pin(1, 3, 1, 0, 3, 0); /* USBTP */
+ par_io_config_pin(1, 8, 1, 0, 1, 0); /* USBTN */
+ par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
+ par_io_config_pin(1, 9, 2, 1, 3, 0); /* USBRP */
+ par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN */
+ par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21 */
+#endif /* CONFIG_QE_USB */
+ }
+
+ if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
+ != NULL){
+ uint svid;
+
+ /* Reset the Ethernet PHY */
+#define BCSR9_GETHRST 0x20
+ clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
+ udelay(1000);
+ setbits8(&bcsr_regs[9], BCSR9_GETHRST);
+
+ /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
+ svid = mfspr(SPRN_SVR);
+ if (svid == 0x80480021) {
+ void __iomem *immap;
+
+ immap = ioremap(get_immrbase() + 0x14a8, 8);
+
+ /*
+ * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
+ * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+ */
+ setbits32(immap, 0x0c003000);
+
+ /*
+ * IMMR + 0x14AC[20:27] = 10101010
+ * (data delay for both UCC's)
+ */
+ clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
+
+ iounmap(immap);
+ }
+
+ iounmap(bcsr_regs);
+ of_node_put(np);
+ }
+#endif /* CONFIG_QUICC_ENGINE */
+}
+
+machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
+
+#ifdef CONFIG_QE_USB
+static int __init mpc836x_usb_cfg(void)
+{
+ u8 __iomem *bcsr;
+ struct device_node *np;
+ const char *mode;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr");
+ if (!np)
+ return -ENODEV;
+
+ bcsr = of_iomap(np, 0);
+ of_node_put(np);
+ if (!bcsr)
+ return -ENOMEM;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
+ if (!np) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+#define BCSR8_TSEC1M_MASK (0x3 << 6)
+#define BCSR8_TSEC1M_RGMII (0x0 << 6)
+#define BCSR8_TSEC2M_MASK (0x3 << 4)
+#define BCSR8_TSEC2M_RGMII (0x0 << 4)
+ /*
+ * Default is GMII (2), but we should set it to RGMII (0) if we use
+ * USB (Eth PHY is in RGMII mode anyway).
+ */
+ clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
+ BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
+
+#define BCSR13_USBMASK 0x0f
+#define BCSR13_nUSBEN 0x08 /* 1 - Disable, 0 - Enable */
+#define BCSR13_USBSPEED 0x04 /* 1 - Full, 0 - Low */
+#define BCSR13_USBMODE 0x02 /* 1 - Host, 0 - Function */
+#define BCSR13_nUSBVCC 0x01 /* 1 - gets VBUS, 0 - supplies VBUS */
+
+ clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED);
+
+ mode = of_get_property(np, "mode", NULL);
+ if (mode && !strcmp(mode, "peripheral")) {
+ setbits8(&bcsr[13], BCSR13_nUSBVCC);
+ qe_usb_clock_set(QE_CLK21, 48000000);
+ } else {
+ setbits8(&bcsr[13], BCSR13_USBMODE);
+ /*
+ * The BCSR GPIOs are used to control power and
+ * speed of the USB transceiver. This is needed for
+ * the USB Host only.
+ */
+ simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
+ }
+
+ of_node_put(np);
+err:
+ iounmap(bcsr);
+ return ret;
+}
+machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
+#endif /* CONFIG_QE_USB */
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc836x_mds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC836xMDS");
+}
+
+define_machine(mpc836x_mds) {
+ .name = "MPC836x MDS",
+ .probe = mpc836x_mds_probe,
+ .setup_arch = mpc836x_mds_setup_arch,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
new file mode 100644
index 000000000..b63b42d11
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -0,0 +1,63 @@
+/*
+ * MPC8360E-RDK board file.
+ *
+ * Copyright (c) 2006 Freescale Semiconductor, Inc.
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+machine_device_initcall(mpc836x_rdk, mpc83xx_declare_of_platform_devices);
+
+static void __init mpc836x_rdk_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+#ifdef CONFIG_QUICC_ENGINE
+ qe_reset();
+#endif
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened.
+ */
+static int __init mpc836x_rdk_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,mpc8360rdk");
+}
+
+define_machine(mpc836x_rdk) {
+ .name = "MPC836x RDK",
+ .probe = mpc836x_rdk_probe,
+ .setup_arch = mpc836x_rdk_setup_arch,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
new file mode 100644
index 000000000..e53a60b6c
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -0,0 +1,111 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc837x_mds.c
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * MPC837x MDS board specific routines
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+#define BCSR12_USB_SER_MASK 0x8a
+#define BCSR12_USB_SER_PIN 0x80
+#define BCSR12_USB_SER_DEVICE 0x02
+
+static int mpc837xmds_usb_cfg(void)
+{
+ struct device_node *np;
+ const void *phy_type, *mode;
+ void __iomem *bcsr_regs = NULL;
+ u8 bcsr12;
+ int ret;
+
+ ret = mpc837x_usb_cfg();
+ if (ret)
+ return ret;
+ /* Map BCSR area */
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr");
+ if (np) {
+ bcsr_regs = of_iomap(np, 0);
+ of_node_put(np);
+ }
+ if (!bcsr_regs)
+ return -1;
+
+ np = of_find_node_by_name(NULL, "usb");
+ if (!np) {
+ ret = -ENODEV;
+ goto out;
+ }
+ phy_type = of_get_property(np, "phy_type", NULL);
+ if (phy_type && !strcmp(phy_type, "ulpi")) {
+ clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
+ } else if (phy_type && !strcmp(phy_type, "serial")) {
+ mode = of_get_property(np, "dr_mode", NULL);
+ bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK;
+ bcsr12 |= BCSR12_USB_SER_PIN;
+ if (mode && !strcmp(mode, "peripheral"))
+ bcsr12 |= BCSR12_USB_SER_DEVICE;
+ out_8(bcsr_regs + 12, bcsr12);
+ } else {
+ printk(KERN_ERR "USB DR: unsupported PHY\n");
+ }
+
+ of_node_put(np);
+out:
+ iounmap(bcsr_regs);
+ return ret;
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc837x_mds_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc837x_mds_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+ mpc837xmds_usb_cfg();
+}
+
+machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc837x_mds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,mpc837xmds");
+}
+
+define_machine(mpc837x_mds) {
+ .name = "MPC837x MDS",
+ .probe = mpc837x_mds_probe,
+ .setup_arch = mpc837x_mds_setup_arch,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
new file mode 100644
index 000000000..9813c81e8
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -0,0 +1,89 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc837x_rdb.c
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * MPC837x RDB board specific routines
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+static void mpc837x_rdb_sd_cfg(void)
+{
+ void __iomem *im;
+
+ im = ioremap(get_immrbase(), 0x1000);
+ if (!im) {
+ WARN_ON(1);
+ return;
+ }
+
+ /*
+ * On RDB boards (in contrast to MDS) USBB pins are used for SD only,
+ * so we can safely mux them away from the USB block.
+ */
+ clrsetbits_be32(im + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USBB_MASK,
+ MPC837X_SICRL_SD);
+ clrsetbits_be32(im + MPC83XX_SICRH_OFFS, MPC837X_SICRH_SPI_MASK,
+ MPC837X_SICRH_SD);
+ iounmap(im);
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc837x_rdb_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc837x_rdb_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+ mpc837x_usb_cfg();
+ mpc837x_rdb_sd_cfg();
+}
+
+machine_device_initcall(mpc837x_rdb, mpc83xx_declare_of_platform_devices);
+
+static const char * const board[] __initconst = {
+ "fsl,mpc8377rdb",
+ "fsl,mpc8378rdb",
+ "fsl,mpc8379rdb",
+ "fsl,mpc8377wlan",
+ NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc837x_rdb_probe(void)
+{
+ return of_flat_dt_match(of_get_flat_dt_root(), board);
+}
+
+define_machine(mpc837x_rdb) {
+ .name = "MPC837x RDB/WLAN",
+ .probe = mpc837x_rdb_probe,
+ .setup_arch = mpc837x_rdb_setup_arch,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
new file mode 100644
index 000000000..0cf74d7ea
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -0,0 +1,90 @@
+#ifndef __MPC83XX_H__
+#define __MPC83XX_H__
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <asm/pci-bridge.h>
+
+/* System Clock Control Register */
+#define MPC83XX_SCCR_OFFS 0xA08
+#define MPC83XX_SCCR_USB_MASK 0x00f00000
+#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000
+#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000
+#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000
+#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
+#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
+#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
+#define MPC8315_SCCR_USB_MASK 0x00c00000
+#define MPC8315_SCCR_USB_DRCM_11 0x00c00000
+#define MPC8315_SCCR_USB_DRCM_01 0x00400000
+#define MPC837X_SCCR_USB_DRCM_11 0x00c00000
+
+/* system i/o configuration register low */
+#define MPC83XX_SICRL_OFFS 0x114
+#define MPC834X_SICRL_USB_MASK 0x60000000
+#define MPC834X_SICRL_USB0 0x20000000
+#define MPC834X_SICRL_USB1 0x40000000
+#define MPC831X_SICRL_USB_MASK 0x00000c00
+#define MPC831X_SICRL_USB_ULPI 0x00000800
+#define MPC8315_SICRL_USB_MASK 0x000000fc
+#define MPC8315_SICRL_USB_ULPI 0x00000054
+#define MPC837X_SICRL_USB_MASK 0xf0000000
+#define MPC837X_SICRL_USB_ULPI 0x50000000
+#define MPC837X_SICRL_USBB_MASK 0x30000000
+#define MPC837X_SICRL_SD 0x20000000
+
+/* system i/o configuration register high */
+#define MPC83XX_SICRH_OFFS 0x118
+#define MPC8308_SICRH_USB_MASK 0x000c0000
+#define MPC8308_SICRH_USB_ULPI 0x00040000
+#define MPC834X_SICRH_USB_UTMI 0x00020000
+#define MPC831X_SICRH_USB_MASK 0x000000e0
+#define MPC831X_SICRH_USB_ULPI 0x000000a0
+#define MPC8315_SICRH_USB_MASK 0x0000ff00
+#define MPC8315_SICRH_USB_ULPI 0x00000000
+#define MPC837X_SICRH_SPI_MASK 0x00000003
+#define MPC837X_SICRH_SD 0x00000001
+
+/* USB Control Register */
+#define FSL_USB2_CONTROL_OFFS 0x500
+#define CONTROL_UTMI_PHY_EN 0x00000200
+#define CONTROL_REFSEL_24MHZ 0x00000040
+#define CONTROL_REFSEL_48MHZ 0x00000080
+#define CONTROL_PHY_CLK_SEL_ULPI 0x00000400
+#define CONTROL_OTG_PORT 0x00000020
+
+/* USB PORTSC Registers */
+#define FSL_USB2_PORTSC1_OFFS 0x184
+#define FSL_USB2_PORTSC2_OFFS 0x188
+#define PORTSCX_PTW_16BIT 0x10000000
+#define PORTSCX_PTS_UTMI 0x00000000
+#define PORTSCX_PTS_ULPI 0x80000000
+
+/*
+ * Declaration for the various functions exported by the
+ * mpc83xx_* files. Mostly for use by mpc83xx_setup
+ */
+
+extern void mpc83xx_restart(char *cmd);
+extern long mpc83xx_time_init(void);
+extern int mpc837x_usb_cfg(void);
+extern int mpc834x_usb_cfg(void);
+extern int mpc831x_usb_cfg(void);
+extern void mpc83xx_ipic_init_IRQ(void);
+#ifdef CONFIG_QUICC_ENGINE
+extern void mpc83xx_qe_init_IRQ(void);
+extern void mpc83xx_ipic_and_qe_init_IRQ(void);
+#else
+static inline void __init mpc83xx_qe_init_IRQ(void) {}
+#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
+#endif /* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_PCI
+extern void mpc83xx_setup_pci(void);
+#else
+#define mpc83xx_setup_pci() do {} while (0)
+#endif
+
+extern int mpc83xx_declare_of_platform_devices(void);
+
+#endif /* __MPC83XX_H__ */
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
new file mode 100644
index 000000000..26cb3e934
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -0,0 +1,78 @@
+/*
+ * arch/powerpc/platforms/83xx/sbc834x.c
+ *
+ * Wind River SBC834x board specific routines
+ *
+ * By Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc834x_mds.c support by Kumar Gala.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/of_platform.h>
+
+#include <linux/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init sbc834x_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("sbc834x_setup_arch()", 0);
+
+ mpc83xx_setup_pci();
+}
+
+machine_device_initcall(sbc834x, mpc83xx_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init sbc834x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "SBC834xE");
+}
+
+define_machine(sbc834x) {
+ .name = "SBC834xE",
+ .probe = sbc834x_probe,
+ .setup_arch = sbc834x_setup_arch,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S
new file mode 100644
index 000000000..3d1ecd211
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -0,0 +1,533 @@
+/*
+ * Enter and leave deep sleep state on MPC83xx
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+
+#define SS_MEMSAVE 0x00 /* First 8 bytes of RAM */
+#define SS_HID 0x08 /* 3 HIDs */
+#define SS_IABR 0x14 /* 2 IABRs */
+#define SS_IBCR 0x1c
+#define SS_DABR 0x20 /* 2 DABRs */
+#define SS_DBCR 0x28
+#define SS_SP 0x2c
+#define SS_SR 0x30 /* 16 segment registers */
+#define SS_R2 0x70
+#define SS_MSR 0x74
+#define SS_SDR1 0x78
+#define SS_LR 0x7c
+#define SS_SPRG 0x80 /* 4 SPRGs */
+#define SS_DBAT 0x90 /* 8 DBATs */
+#define SS_IBAT 0xd0 /* 8 IBATs */
+#define SS_TB 0x110
+#define SS_CR 0x118
+#define SS_GPREG 0x11c /* r12-r31 */
+#define STATE_SAVE_SIZE 0x16c
+
+ .section .data
+ .align 5
+
+mpc83xx_sleep_save_area:
+ .space STATE_SAVE_SIZE
+immrbase:
+ .long 0
+
+ .section .text
+ .align 5
+
+ /* r3 = physical address of IMMR */
+_GLOBAL(mpc83xx_enter_deep_sleep)
+ lis r4, immrbase@ha
+ stw r3, immrbase@l(r4)
+
+ /* The first 2 words of memory are used to communicate with the
+ * bootloader, to tell it how to resume.
+ *
+ * The first word is the magic number 0xf5153ae5, and the second
+ * is the pointer to mpc83xx_deep_resume.
+ *
+ * The original content of these two words is saved in SS_MEMSAVE.
+ */
+
+ lis r3, mpc83xx_sleep_save_area@h
+ ori r3, r3, mpc83xx_sleep_save_area@l
+
+ lis r4, KERNELBASE@h
+ lwz r5, 0(r4)
+ lwz r6, 4(r4)
+
+ stw r5, SS_MEMSAVE+0(r3)
+ stw r6, SS_MEMSAVE+4(r3)
+
+ mfspr r5, SPRN_HID0
+ mfspr r6, SPRN_HID1
+ mfspr r7, SPRN_HID2
+
+ stw r5, SS_HID+0(r3)
+ stw r6, SS_HID+4(r3)
+ stw r7, SS_HID+8(r3)
+
+ mfspr r4, SPRN_IABR
+ mfspr r5, SPRN_IABR2
+ mfspr r6, SPRN_IBCR
+ mfspr r7, SPRN_DABR
+ mfspr r8, SPRN_DABR2
+ mfspr r9, SPRN_DBCR
+
+ stw r4, SS_IABR+0(r3)
+ stw r5, SS_IABR+4(r3)
+ stw r6, SS_IBCR(r3)
+ stw r7, SS_DABR+0(r3)
+ stw r8, SS_DABR+4(r3)
+ stw r9, SS_DBCR(r3)
+
+ mfspr r4, SPRN_SPRG0
+ mfspr r5, SPRN_SPRG1
+ mfspr r6, SPRN_SPRG2
+ mfspr r7, SPRN_SPRG3
+ mfsdr1 r8
+
+ stw r4, SS_SPRG+0(r3)
+ stw r5, SS_SPRG+4(r3)
+ stw r6, SS_SPRG+8(r3)
+ stw r7, SS_SPRG+12(r3)
+ stw r8, SS_SDR1(r3)
+
+ mfspr r4, SPRN_DBAT0U
+ mfspr r5, SPRN_DBAT0L
+ mfspr r6, SPRN_DBAT1U
+ mfspr r7, SPRN_DBAT1L
+
+ stw r4, SS_DBAT+0x00(r3)
+ stw r5, SS_DBAT+0x04(r3)
+ stw r6, SS_DBAT+0x08(r3)
+ stw r7, SS_DBAT+0x0c(r3)
+
+ mfspr r4, SPRN_DBAT2U
+ mfspr r5, SPRN_DBAT2L
+ mfspr r6, SPRN_DBAT3U
+ mfspr r7, SPRN_DBAT3L
+
+ stw r4, SS_DBAT+0x10(r3)
+ stw r5, SS_DBAT+0x14(r3)
+ stw r6, SS_DBAT+0x18(r3)
+ stw r7, SS_DBAT+0x1c(r3)
+
+ mfspr r4, SPRN_DBAT4U
+ mfspr r5, SPRN_DBAT4L
+ mfspr r6, SPRN_DBAT5U
+ mfspr r7, SPRN_DBAT5L
+
+ stw r4, SS_DBAT+0x20(r3)
+ stw r5, SS_DBAT+0x24(r3)
+ stw r6, SS_DBAT+0x28(r3)
+ stw r7, SS_DBAT+0x2c(r3)
+
+ mfspr r4, SPRN_DBAT6U
+ mfspr r5, SPRN_DBAT6L
+ mfspr r6, SPRN_DBAT7U
+ mfspr r7, SPRN_DBAT7L
+
+ stw r4, SS_DBAT+0x30(r3)
+ stw r5, SS_DBAT+0x34(r3)
+ stw r6, SS_DBAT+0x38(r3)
+ stw r7, SS_DBAT+0x3c(r3)
+
+ mfspr r4, SPRN_IBAT0U
+ mfspr r5, SPRN_IBAT0L
+ mfspr r6, SPRN_IBAT1U
+ mfspr r7, SPRN_IBAT1L
+
+ stw r4, SS_IBAT+0x00(r3)
+ stw r5, SS_IBAT+0x04(r3)
+ stw r6, SS_IBAT+0x08(r3)
+ stw r7, SS_IBAT+0x0c(r3)
+
+ mfspr r4, SPRN_IBAT2U
+ mfspr r5, SPRN_IBAT2L
+ mfspr r6, SPRN_IBAT3U
+ mfspr r7, SPRN_IBAT3L
+
+ stw r4, SS_IBAT+0x10(r3)
+ stw r5, SS_IBAT+0x14(r3)
+ stw r6, SS_IBAT+0x18(r3)
+ stw r7, SS_IBAT+0x1c(r3)
+
+ mfspr r4, SPRN_IBAT4U
+ mfspr r5, SPRN_IBAT4L
+ mfspr r6, SPRN_IBAT5U
+ mfspr r7, SPRN_IBAT5L
+
+ stw r4, SS_IBAT+0x20(r3)
+ stw r5, SS_IBAT+0x24(r3)
+ stw r6, SS_IBAT+0x28(r3)
+ stw r7, SS_IBAT+0x2c(r3)
+
+ mfspr r4, SPRN_IBAT6U
+ mfspr r5, SPRN_IBAT6L
+ mfspr r6, SPRN_IBAT7U
+ mfspr r7, SPRN_IBAT7L
+
+ stw r4, SS_IBAT+0x30(r3)
+ stw r5, SS_IBAT+0x34(r3)
+ stw r6, SS_IBAT+0x38(r3)
+ stw r7, SS_IBAT+0x3c(r3)
+
+ mfmsr r4
+ mflr r5
+ mfcr r6
+
+ stw r4, SS_MSR(r3)
+ stw r5, SS_LR(r3)
+ stw r6, SS_CR(r3)
+ stw r1, SS_SP(r3)
+ stw r2, SS_R2(r3)
+
+1: mftbu r4
+ mftb r5
+ mftbu r6
+ cmpw r4, r6
+ bne 1b
+
+ stw r4, SS_TB+0(r3)
+ stw r5, SS_TB+4(r3)
+
+ stmw r12, SS_GPREG(r3)
+
+ li r4, 0
+ addi r6, r3, SS_SR-4
+1: mfsrin r5, r4
+ stwu r5, 4(r6)
+ addis r4, r4, 0x1000
+ cmpwi r4, 0
+ bne 1b
+
+ /* Disable machine checks and critical exceptions */
+ mfmsr r4
+ rlwinm r4, r4, 0, ~MSR_CE
+ rlwinm r4, r4, 0, ~MSR_ME
+ mtmsr r4
+ isync
+
+#define TMP_VIRT_IMMR 0xf0000000
+#define DEFAULT_IMMR_VALUE 0xff400000
+#define IMMRBAR_BASE 0x0000
+
+ lis r4, immrbase@ha
+ lwz r4, immrbase@l(r4)
+
+ /* Use DBAT0 to address the current IMMR space */
+
+ ori r4, r4, 0x002a
+ mtspr SPRN_DBAT0L, r4
+ lis r8, TMP_VIRT_IMMR@h
+ ori r4, r8, 0x001e /* 1 MByte accessible from Kernel Space only */
+ mtspr SPRN_DBAT0U, r4
+ isync
+
+ /* Use DBAT1 to address the original IMMR space */
+
+ lis r4, DEFAULT_IMMR_VALUE@h
+ ori r4, r4, 0x002a
+ mtspr SPRN_DBAT1L, r4
+ lis r9, (TMP_VIRT_IMMR + 0x01000000)@h
+ ori r4, r9, 0x001e /* 1 MByte accessible from Kernel Space only */
+ mtspr SPRN_DBAT1U, r4
+ isync
+
+ /* Use DBAT2 to address the beginning of RAM. This isn't done
+ * using the normal virtual mapping, because with page debugging
+ * enabled it will be read-only.
+ */
+
+ li r4, 0x0002
+ mtspr SPRN_DBAT2L, r4
+ lis r4, KERNELBASE@h
+ ori r4, r4, 0x001e /* 1 MByte accessible from Kernel Space only */
+ mtspr SPRN_DBAT2U, r4
+ isync
+
+ /* Flush the cache with our BAT, as there will be TLB misses
+ * otherwise if page debugging is enabled, and these misses
+ * will disturb the PLRU algorithm.
+ */
+
+ bl __flush_disable_L1
+
+ /* Keep the i-cache enabled, so the hack below for low-boot
+ * flash will work.
+ */
+ mfspr r3, SPRN_HID0
+ ori r3, r3, HID0_ICE
+ mtspr SPRN_HID0, r3
+ isync
+
+ lis r6, 0xf515
+ ori r6, r6, 0x3ae5
+
+ lis r7, mpc83xx_deep_resume@h
+ ori r7, r7, mpc83xx_deep_resume@l
+ tophys(r7, r7)
+
+ lis r5, KERNELBASE@h
+ stw r6, 0(r5)
+ stw r7, 4(r5)
+
+ /* Reset BARs */
+
+ li r4, 0
+ stw r4, 0x0024(r8)
+ stw r4, 0x002c(r8)
+ stw r4, 0x0034(r8)
+ stw r4, 0x003c(r8)
+ stw r4, 0x0064(r8)
+ stw r4, 0x006c(r8)
+
+ /* Rev 1 of the 8313 has problems with wakeup events that are
+ * pending during the transition to deep sleep state (such as if
+ * the PCI host sets the state to D3 and then D0 in rapid
+ * succession). This check shrinks the race window somewhat.
+ *
+ * See erratum PCI23, though the problem is not limited
+ * to PCI.
+ */
+
+ lwz r3, 0x0b04(r8)
+ andi. r3, r3, 1
+ bne- mpc83xx_deep_resume
+
+ /* Move IMMR back to the default location, following the
+ * procedure specified in the MPC8313 manual.
+ */
+ lwz r4, IMMRBAR_BASE(r8)
+ isync
+ lis r4, DEFAULT_IMMR_VALUE@h
+ stw r4, IMMRBAR_BASE(r8)
+ lis r4, KERNELBASE@h
+ lwz r4, 0(r4)
+ isync
+ lwz r4, IMMRBAR_BASE(r9)
+ mr r8, r9
+ isync
+
+ /* Check the Reset Configuration Word to see whether flash needs
+ * to be mapped at a low address or a high address.
+ */
+
+ lwz r4, 0x0904(r8)
+ andis. r4, r4, 0x0400
+ li r4, 0
+ beq boot_low
+ lis r4, 0xff80
+boot_low:
+ stw r4, 0x0020(r8)
+ lis r7, 0x8000
+ ori r7, r7, 0x0016
+
+ mfspr r5, SPRN_HID0
+ rlwinm r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+ oris r5, r5, HID0_SLEEP@h
+ mtspr SPRN_HID0, r5
+ isync
+
+ mfmsr r5
+ oris r5, r5, MSR_POW@h
+
+ /* Enable the flash mapping at the appropriate address. This
+ * mapping will override the RAM mapping if booting low, so there's
+ * no need to disable the latter. This must be done inside the same
+ * cache line as setting MSR_POW, so that no instruction fetches
+ * from RAM happen after the flash mapping is turned on.
+ */
+
+ .align 5
+ stw r7, 0x0024(r8)
+ sync
+ isync
+ mtmsr r5
+ isync
+1: b 1b
+
+mpc83xx_deep_resume:
+ lis r4, 1f@h
+ ori r4, r4, 1f@l
+ tophys(r4, r4)
+ mtsrr0 r4
+
+ mfmsr r4
+ rlwinm r4, r4, 0, ~(MSR_IR | MSR_DR)
+ mtsrr1 r4
+
+ rfi
+
+1: tlbia
+ bl __inval_enable_L1
+
+ lis r3, mpc83xx_sleep_save_area@h
+ ori r3, r3, mpc83xx_sleep_save_area@l
+ tophys(r3, r3)
+
+ lwz r5, SS_MEMSAVE+0(r3)
+ lwz r6, SS_MEMSAVE+4(r3)
+
+ stw r5, 0(0)
+ stw r6, 4(0)
+
+ lwz r5, SS_HID+0(r3)
+ lwz r6, SS_HID+4(r3)
+ lwz r7, SS_HID+8(r3)
+
+ mtspr SPRN_HID0, r5
+ mtspr SPRN_HID1, r6
+ mtspr SPRN_HID2, r7
+
+ lwz r4, SS_IABR+0(r3)
+ lwz r5, SS_IABR+4(r3)
+ lwz r6, SS_IBCR(r3)
+ lwz r7, SS_DABR+0(r3)
+ lwz r8, SS_DABR+4(r3)
+ lwz r9, SS_DBCR(r3)
+
+ mtspr SPRN_IABR, r4
+ mtspr SPRN_IABR2, r5
+ mtspr SPRN_IBCR, r6
+ mtspr SPRN_DABR, r7
+ mtspr SPRN_DABR2, r8
+ mtspr SPRN_DBCR, r9
+
+ li r4, 0
+ addi r6, r3, SS_SR-4
+1: lwzu r5, 4(r6)
+ mtsrin r5, r4
+ addis r4, r4, 0x1000
+ cmpwi r4, 0
+ bne 1b
+
+ lwz r4, SS_DBAT+0x00(r3)
+ lwz r5, SS_DBAT+0x04(r3)
+ lwz r6, SS_DBAT+0x08(r3)
+ lwz r7, SS_DBAT+0x0c(r3)
+
+ mtspr SPRN_DBAT0U, r4
+ mtspr SPRN_DBAT0L, r5
+ mtspr SPRN_DBAT1U, r6
+ mtspr SPRN_DBAT1L, r7
+
+ lwz r4, SS_DBAT+0x10(r3)
+ lwz r5, SS_DBAT+0x14(r3)
+ lwz r6, SS_DBAT+0x18(r3)
+ lwz r7, SS_DBAT+0x1c(r3)
+
+ mtspr SPRN_DBAT2U, r4
+ mtspr SPRN_DBAT2L, r5
+ mtspr SPRN_DBAT3U, r6
+ mtspr SPRN_DBAT3L, r7
+
+ lwz r4, SS_DBAT+0x20(r3)
+ lwz r5, SS_DBAT+0x24(r3)
+ lwz r6, SS_DBAT+0x28(r3)
+ lwz r7, SS_DBAT+0x2c(r3)
+
+ mtspr SPRN_DBAT4U, r4
+ mtspr SPRN_DBAT4L, r5
+ mtspr SPRN_DBAT5U, r6
+ mtspr SPRN_DBAT5L, r7
+
+ lwz r4, SS_DBAT+0x30(r3)
+ lwz r5, SS_DBAT+0x34(r3)
+ lwz r6, SS_DBAT+0x38(r3)
+ lwz r7, SS_DBAT+0x3c(r3)
+
+ mtspr SPRN_DBAT6U, r4
+ mtspr SPRN_DBAT6L, r5
+ mtspr SPRN_DBAT7U, r6
+ mtspr SPRN_DBAT7L, r7
+
+ lwz r4, SS_IBAT+0x00(r3)
+ lwz r5, SS_IBAT+0x04(r3)
+ lwz r6, SS_IBAT+0x08(r3)
+ lwz r7, SS_IBAT+0x0c(r3)
+
+ mtspr SPRN_IBAT0U, r4
+ mtspr SPRN_IBAT0L, r5
+ mtspr SPRN_IBAT1U, r6
+ mtspr SPRN_IBAT1L, r7
+
+ lwz r4, SS_IBAT+0x10(r3)
+ lwz r5, SS_IBAT+0x14(r3)
+ lwz r6, SS_IBAT+0x18(r3)
+ lwz r7, SS_IBAT+0x1c(r3)
+
+ mtspr SPRN_IBAT2U, r4
+ mtspr SPRN_IBAT2L, r5
+ mtspr SPRN_IBAT3U, r6
+ mtspr SPRN_IBAT3L, r7
+
+ lwz r4, SS_IBAT+0x20(r3)
+ lwz r5, SS_IBAT+0x24(r3)
+ lwz r6, SS_IBAT+0x28(r3)
+ lwz r7, SS_IBAT+0x2c(r3)
+
+ mtspr SPRN_IBAT4U, r4
+ mtspr SPRN_IBAT4L, r5
+ mtspr SPRN_IBAT5U, r6
+ mtspr SPRN_IBAT5L, r7
+
+ lwz r4, SS_IBAT+0x30(r3)
+ lwz r5, SS_IBAT+0x34(r3)
+ lwz r6, SS_IBAT+0x38(r3)
+ lwz r7, SS_IBAT+0x3c(r3)
+
+ mtspr SPRN_IBAT6U, r4
+ mtspr SPRN_IBAT6L, r5
+ mtspr SPRN_IBAT7U, r6
+ mtspr SPRN_IBAT7L, r7
+
+ lwz r4, SS_SPRG+0(r3)
+ lwz r5, SS_SPRG+4(r3)
+ lwz r6, SS_SPRG+8(r3)
+ lwz r7, SS_SPRG+12(r3)
+ lwz r8, SS_SDR1(r3)
+
+ mtspr SPRN_SPRG0, r4
+ mtspr SPRN_SPRG1, r5
+ mtspr SPRN_SPRG2, r6
+ mtspr SPRN_SPRG3, r7
+ mtsdr1 r8
+
+ lwz r4, SS_MSR(r3)
+ lwz r5, SS_LR(r3)
+ lwz r6, SS_CR(r3)
+ lwz r1, SS_SP(r3)
+ lwz r2, SS_R2(r3)
+
+ mtsrr1 r4
+ mtsrr0 r5
+ mtcr r6
+
+ li r4, 0
+ mtspr SPRN_TBWL, r4
+
+ lwz r4, SS_TB+0(r3)
+ lwz r5, SS_TB+4(r3)
+
+ mtspr SPRN_TBWU, r4
+ mtspr SPRN_TBWL, r5
+
+ lmw r12, SS_GPREG(r3)
+
+ /* Kick decrementer */
+ li r0, 1
+ mtdec r0
+
+ rfi
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
new file mode 100644
index 000000000..c9adbfb65
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -0,0 +1,449 @@
+/*
+ * MPC83xx suspend support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/suspend.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/export.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mpc6xx.h>
+#include <asm/switch_to.h>
+
+#include <sysdev/fsl_soc.h>
+
+#define PMCCR1_NEXT_STATE 0x0C /* Next state for power management */
+#define PMCCR1_NEXT_STATE_SHIFT 2
+#define PMCCR1_CURR_STATE 0x03 /* Current state for power management*/
+#define IMMR_SYSCR_OFFSET 0x100
+#define IMMR_RCW_OFFSET 0x900
+#define RCW_PCI_HOST 0x80000000
+
+void mpc83xx_enter_deep_sleep(phys_addr_t immrbase);
+
+struct mpc83xx_pmc {
+ u32 config;
+#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */
+#define PMCCR_SLPEN 1 /* System low power enable */
+
+ u32 event;
+ u32 mask;
+/* All but PMCI are deep-sleep only */
+#define PMCER_GPIO 0x100
+#define PMCER_PCI 0x080
+#define PMCER_USB 0x040
+#define PMCER_ETSEC1 0x020
+#define PMCER_ETSEC2 0x010
+#define PMCER_TIMER 0x008
+#define PMCER_INT1 0x004
+#define PMCER_INT2 0x002
+#define PMCER_PMCI 0x001
+#define PMCER_ALL 0x1FF
+
+ /* deep-sleep only */
+ u32 config1;
+#define PMCCR1_USE_STATE 0x80000000
+#define PMCCR1_PME_EN 0x00000080
+#define PMCCR1_ASSERT_PME 0x00000040
+#define PMCCR1_POWER_OFF 0x00000020
+
+ /* deep-sleep only */
+ u32 config2;
+};
+
+struct mpc83xx_rcw {
+ u32 rcwlr;
+ u32 rcwhr;
+};
+
+struct mpc83xx_clock {
+ u32 spmr;
+ u32 occr;
+ u32 sccr;
+};
+
+struct mpc83xx_syscr {
+ __be32 sgprl;
+ __be32 sgprh;
+ __be32 spridr;
+ __be32 :32;
+ __be32 spcr;
+ __be32 sicrl;
+ __be32 sicrh;
+};
+
+struct mpc83xx_saved {
+ u32 sicrl;
+ u32 sicrh;
+ u32 sccr;
+};
+
+struct pmc_type {
+ int has_deep_sleep;
+};
+
+static struct platform_device *pmc_dev;
+static int has_deep_sleep, deep_sleeping;
+static int pmc_irq;
+static struct mpc83xx_pmc __iomem *pmc_regs;
+static struct mpc83xx_clock __iomem *clock_regs;
+static struct mpc83xx_syscr __iomem *syscr_regs;
+static struct mpc83xx_saved saved_regs;
+static int is_pci_agent, wake_from_pci;
+static phys_addr_t immrbase;
+static int pci_pm_state;
+static DECLARE_WAIT_QUEUE_HEAD(agent_wq);
+
+int fsl_deep_sleep(void)
+{
+ return deep_sleeping;
+}
+EXPORT_SYMBOL(fsl_deep_sleep);
+
+static int mpc83xx_change_state(void)
+{
+ u32 curr_state;
+ u32 reg_cfg1 = in_be32(&pmc_regs->config1);
+
+ if (is_pci_agent) {
+ pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >>
+ PMCCR1_NEXT_STATE_SHIFT;
+ curr_state = reg_cfg1 & PMCCR1_CURR_STATE;
+
+ if (curr_state != pci_pm_state) {
+ reg_cfg1 &= ~PMCCR1_CURR_STATE;
+ reg_cfg1 |= pci_pm_state;
+ out_be32(&pmc_regs->config1, reg_cfg1);
+
+ wake_up(&agent_wq);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
+{
+ u32 event = in_be32(&pmc_regs->event);
+ int ret = IRQ_NONE;
+
+ if (mpc83xx_change_state())
+ ret = IRQ_HANDLED;
+
+ if (event) {
+ out_be32(&pmc_regs->event, event);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+static void mpc83xx_suspend_restore_regs(void)
+{
+ out_be32(&syscr_regs->sicrl, saved_regs.sicrl);
+ out_be32(&syscr_regs->sicrh, saved_regs.sicrh);
+ out_be32(&clock_regs->sccr, saved_regs.sccr);
+}
+
+static void mpc83xx_suspend_save_regs(void)
+{
+ saved_regs.sicrl = in_be32(&syscr_regs->sicrl);
+ saved_regs.sicrh = in_be32(&syscr_regs->sicrh);
+ saved_regs.sccr = in_be32(&clock_regs->sccr);
+}
+
+static int mpc83xx_suspend_enter(suspend_state_t state)
+{
+ int ret = -EAGAIN;
+
+ /* Don't go to sleep if there's a race where pci_pm_state changes
+ * between the agent thread checking it and the PM code disabling
+ * interrupts.
+ */
+ if (wake_from_pci) {
+ if (pci_pm_state != (deep_sleeping ? 3 : 2))
+ goto out;
+
+ out_be32(&pmc_regs->config1,
+ in_be32(&pmc_regs->config1) | PMCCR1_PME_EN);
+ }
+
+ /* Put the system into low-power mode and the RAM
+ * into self-refresh mode once the core goes to
+ * sleep.
+ */
+
+ out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN);
+
+ /* If it has deep sleep (i.e. it's an 831x or compatible),
+ * disable power to the core upon entering sleep mode. This will
+ * require going through the boot firmware upon a wakeup event.
+ */
+
+ if (deep_sleeping) {
+ mpc83xx_suspend_save_regs();
+
+ out_be32(&pmc_regs->mask, PMCER_ALL);
+
+ out_be32(&pmc_regs->config1,
+ in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF);
+
+ enable_kernel_fp();
+
+ mpc83xx_enter_deep_sleep(immrbase);
+
+ out_be32(&pmc_regs->config1,
+ in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
+
+ out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+ mpc83xx_suspend_restore_regs();
+ } else {
+ out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+ mpc6xx_enter_standby();
+ }
+
+ ret = 0;
+
+out:
+ out_be32(&pmc_regs->config1,
+ in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN);
+
+ return ret;
+}
+
+static void mpc83xx_suspend_end(void)
+{
+ deep_sleeping = 0;
+}
+
+static int mpc83xx_suspend_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM;
+}
+
+static int mpc83xx_suspend_begin(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ deep_sleeping = 0;
+ return 0;
+
+ case PM_SUSPEND_MEM:
+ if (has_deep_sleep)
+ deep_sleeping = 1;
+
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int agent_thread_fn(void *data)
+{
+ while (1) {
+ wait_event_interruptible(agent_wq, pci_pm_state >= 2);
+ try_to_freeze();
+
+ if (signal_pending(current) || pci_pm_state < 2)
+ continue;
+
+ /* With a preemptible kernel (or SMP), this could race with
+ * a userspace-driven suspend request. It's probably best
+ * to avoid mixing the two with such a configuration (or
+ * else fix it by adding a mutex to state_store that we can
+ * synchronize with).
+ */
+
+ wake_from_pci = 1;
+
+ pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM :
+ PM_SUSPEND_STANDBY);
+
+ wake_from_pci = 0;
+ }
+
+ return 0;
+}
+
+static void mpc83xx_set_agent(void)
+{
+ out_be32(&pmc_regs->config1, PMCCR1_USE_STATE);
+ out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+ kthread_run(agent_thread_fn, NULL, "PCI power mgt");
+}
+
+static int mpc83xx_is_pci_agent(void)
+{
+ struct mpc83xx_rcw __iomem *rcw_regs;
+ int ret;
+
+ rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET,
+ sizeof(struct mpc83xx_rcw));
+
+ if (!rcw_regs)
+ return -ENOMEM;
+
+ ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST);
+
+ iounmap(rcw_regs);
+ return ret;
+}
+
+static const struct platform_suspend_ops mpc83xx_suspend_ops = {
+ .valid = mpc83xx_suspend_valid,
+ .begin = mpc83xx_suspend_begin,
+ .enter = mpc83xx_suspend_enter,
+ .end = mpc83xx_suspend_end,
+};
+
+static const struct of_device_id pmc_match[];
+static int pmc_probe(struct platform_device *ofdev)
+{
+ const struct of_device_id *match;
+ struct device_node *np = ofdev->dev.of_node;
+ struct resource res;
+ const struct pmc_type *type;
+ int ret = 0;
+
+ match = of_match_device(pmc_match, &ofdev->dev);
+ if (!match)
+ return -EINVAL;
+
+ type = match->data;
+
+ if (!of_device_is_available(np))
+ return -ENODEV;
+
+ has_deep_sleep = type->has_deep_sleep;
+ immrbase = get_immrbase();
+ pmc_dev = ofdev;
+
+ is_pci_agent = mpc83xx_is_pci_agent();
+ if (is_pci_agent < 0)
+ return is_pci_agent;
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ return -ENODEV;
+
+ pmc_irq = irq_of_parse_and_map(np, 0);
+ if (pmc_irq != NO_IRQ) {
+ ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED,
+ "pmc", ofdev);
+
+ if (ret)
+ return -EBUSY;
+ }
+
+ pmc_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+ if (!pmc_regs) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = of_address_to_resource(np, 1, &res);
+ if (ret) {
+ ret = -ENODEV;
+ goto out_pmc;
+ }
+
+ clock_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+ if (!clock_regs) {
+ ret = -ENOMEM;
+ goto out_pmc;
+ }
+
+ if (has_deep_sleep) {
+ syscr_regs = ioremap(immrbase + IMMR_SYSCR_OFFSET,
+ sizeof(*syscr_regs));
+ if (!syscr_regs) {
+ ret = -ENOMEM;
+ goto out_syscr;
+ }
+ }
+
+ if (is_pci_agent)
+ mpc83xx_set_agent();
+
+ suspend_set_ops(&mpc83xx_suspend_ops);
+ return 0;
+
+out_syscr:
+ iounmap(clock_regs);
+out_pmc:
+ iounmap(pmc_regs);
+out:
+ if (pmc_irq != NO_IRQ)
+ free_irq(pmc_irq, ofdev);
+
+ return ret;
+}
+
+static int pmc_remove(struct platform_device *ofdev)
+{
+ return -EPERM;
+};
+
+static struct pmc_type pmc_types[] = {
+ {
+ .has_deep_sleep = 1,
+ },
+ {
+ .has_deep_sleep = 0,
+ }
+};
+
+static const struct of_device_id pmc_match[] = {
+ {
+ .compatible = "fsl,mpc8313-pmc",
+ .data = &pmc_types[0],
+ },
+ {
+ .compatible = "fsl,mpc8349-pmc",
+ .data = &pmc_types[1],
+ },
+ {}
+};
+
+static struct platform_driver pmc_driver = {
+ .driver = {
+ .name = "mpc83xx-pmc",
+ .of_match_table = pmc_match,
+ },
+ .probe = pmc_probe,
+ .remove = pmc_remove
+};
+
+static int pmc_init(void)
+{
+ return platform_driver_register(&pmc_driver);
+}
+
+module_init(pmc_init);
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
new file mode 100644
index 000000000..5c31d8292
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -0,0 +1,253 @@
+/*
+ * Freescale 83xx USB SOC setup code
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Author: Li Yang
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+
+#ifdef CONFIG_PPC_MPC834x
+int mpc834x_usb_cfg(void)
+{
+ unsigned long sccr, sicrl, sicrh;
+ void __iomem *immap;
+ struct device_node *np = NULL;
+ int port0_is_dr = 0, port1_is_dr = 0;
+ const void *prop, *dr_mode;
+
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap)
+ return -ENOMEM;
+
+ /* Read registers */
+ /* Note: DR and MPH must use the same clock setting in SCCR */
+ sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK;
+ sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
+ sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+ if (np) {
+ sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
+
+ prop = of_get_property(np, "phy_type", NULL);
+ port1_is_dr = 1;
+ if (prop && (!strcmp(prop, "utmi") ||
+ !strcmp(prop, "utmi_wide"))) {
+ sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
+ sicrh |= MPC834X_SICRH_USB_UTMI;
+ port0_is_dr = 1;
+ } else if (prop && !strcmp(prop, "serial")) {
+ dr_mode = of_get_property(np, "dr_mode", NULL);
+ if (dr_mode && !strcmp(dr_mode, "otg")) {
+ sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
+ port0_is_dr = 1;
+ } else {
+ sicrl |= MPC834X_SICRL_USB1;
+ }
+ } else if (prop && !strcmp(prop, "ulpi")) {
+ sicrl |= MPC834X_SICRL_USB1;
+ } else {
+ printk(KERN_WARNING "834x USB PHY type not supported\n");
+ }
+ of_node_put(np);
+ }
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
+ if (np) {
+ sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
+
+ prop = of_get_property(np, "port0", NULL);
+ if (prop) {
+ if (port0_is_dr)
+ printk(KERN_WARNING
+ "834x USB port0 can't be used by both DR and MPH!\n");
+ sicrl &= ~MPC834X_SICRL_USB0;
+ }
+ prop = of_get_property(np, "port1", NULL);
+ if (prop) {
+ if (port1_is_dr)
+ printk(KERN_WARNING
+ "834x USB port1 can't be used by both DR and MPH!\n");
+ sicrl &= ~MPC834X_SICRL_USB1;
+ }
+ of_node_put(np);
+ }
+
+ /* Write back */
+ out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
+ out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
+ out_be32(immap + MPC83XX_SICRH_OFFS, sicrh);
+
+ iounmap(immap);
+ return 0;
+}
+#endif /* CONFIG_PPC_MPC834x */
+
+#ifdef CONFIG_PPC_MPC831x
+int mpc831x_usb_cfg(void)
+{
+ u32 temp;
+ void __iomem *immap, *usb_regs;
+ struct device_node *np = NULL;
+ struct device_node *immr_node = NULL;
+ const void *prop;
+ struct resource res;
+ int ret = 0;
+#ifdef CONFIG_USB_OTG
+ const void *dr_mode;
+#endif
+
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+ if (!np)
+ return -ENODEV;
+ prop = of_get_property(np, "phy_type", NULL);
+
+ /* Map IMMR space for pin and clock settings */
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap) {
+ of_node_put(np);
+ return -ENOMEM;
+ }
+
+ /* Configure clock */
+ immr_node = of_get_parent(np);
+ if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") ||
+ of_device_is_compatible(immr_node, "fsl,mpc8308-immr")))
+ clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+ MPC8315_SCCR_USB_MASK,
+ MPC8315_SCCR_USB_DRCM_01);
+ else
+ clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+ MPC83XX_SCCR_USB_MASK,
+ MPC83XX_SCCR_USB_DRCM_11);
+
+ /* Configure pin mux for ULPI. There is no pin mux for UTMI */
+ if (prop && !strcmp(prop, "ulpi")) {
+ if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
+ clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+ MPC8308_SICRH_USB_MASK,
+ MPC8308_SICRH_USB_ULPI);
+ } else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
+ clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+ MPC8315_SICRL_USB_MASK,
+ MPC8315_SICRL_USB_ULPI);
+ clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+ MPC8315_SICRH_USB_MASK,
+ MPC8315_SICRH_USB_ULPI);
+ } else {
+ clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+ MPC831X_SICRL_USB_MASK,
+ MPC831X_SICRL_USB_ULPI);
+ clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+ MPC831X_SICRH_USB_MASK,
+ MPC831X_SICRH_USB_ULPI);
+ }
+ }
+
+ iounmap(immap);
+
+ of_node_put(immr_node);
+
+ /* Map USB SOC space */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
+ of_node_put(np);
+ return ret;
+ }
+ usb_regs = ioremap(res.start, resource_size(&res));
+
+ /* Using on-chip PHY */
+ if (prop && (!strcmp(prop, "utmi_wide") ||
+ !strcmp(prop, "utmi"))) {
+ u32 refsel;
+
+ if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))
+ goto out;
+
+ if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+ refsel = CONTROL_REFSEL_24MHZ;
+ else
+ refsel = CONTROL_REFSEL_48MHZ;
+ /* Set UTMI_PHY_EN and REFSEL */
+ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
+ CONTROL_UTMI_PHY_EN | refsel);
+ /* Using external UPLI PHY */
+ } else if (prop && !strcmp(prop, "ulpi")) {
+ /* Set PHY_CLK_SEL to ULPI */
+ temp = CONTROL_PHY_CLK_SEL_ULPI;
+#ifdef CONFIG_USB_OTG
+ /* Set OTG_PORT */
+ if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
+ dr_mode = of_get_property(np, "dr_mode", NULL);
+ if (dr_mode && !strcmp(dr_mode, "otg"))
+ temp |= CONTROL_OTG_PORT;
+ }
+#endif /* CONFIG_USB_OTG */
+ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp);
+ } else {
+ printk(KERN_WARNING "831x USB PHY type not supported\n");
+ ret = -EINVAL;
+ }
+
+out:
+ iounmap(usb_regs);
+ of_node_put(np);
+ return ret;
+}
+#endif /* CONFIG_PPC_MPC831x */
+
+#ifdef CONFIG_PPC_MPC837x
+int mpc837x_usb_cfg(void)
+{
+ void __iomem *immap;
+ struct device_node *np = NULL;
+ const void *prop;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+ if (!np || !of_device_is_available(np))
+ return -ENODEV;
+ prop = of_get_property(np, "phy_type", NULL);
+
+ if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
+ printk(KERN_WARNING "837x USB PHY type not supported\n");
+ of_node_put(np);
+ return -EINVAL;
+ }
+
+ /* Map IMMR space for pin and clock settings */
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap) {
+ of_node_put(np);
+ return -ENOMEM;
+ }
+
+ /* Configure clock */
+ clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
+ MPC837X_SCCR_USB_DRCM_11);
+
+ /* Configure pin mux for ULPI/serial */
+ clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
+ MPC837X_SICRL_USB_ULPI);
+
+ iounmap(immap);
+ of_node_put(np);
+ return ret;
+}
+#endif /* CONFIG_PPC_MPC837x */