summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/mwait.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/include/asm/mwait.h')
-rw-r--r--arch/x86/include/asm/mwait.h45
1 files changed, 45 insertions, 0 deletions
diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
index 653dfa766..c70689b5e 100644
--- a/arch/x86/include/asm/mwait.h
+++ b/arch/x86/include/asm/mwait.h
@@ -14,6 +14,9 @@
#define CPUID5_ECX_INTERRUPT_BREAK 0x2
#define MWAIT_ECX_INTERRUPT_BREAK 0x1
+#define MWAITX_ECX_TIMER_ENABLE BIT(1)
+#define MWAITX_MAX_LOOPS ((u32)-1)
+#define MWAITX_DISABLE_CSTATES 0xf
static inline void __monitor(const void *eax, unsigned long ecx,
unsigned long edx)
@@ -23,6 +26,14 @@ static inline void __monitor(const void *eax, unsigned long ecx,
:: "a" (eax), "c" (ecx), "d"(edx));
}
+static inline void __monitorx(const void *eax, unsigned long ecx,
+ unsigned long edx)
+{
+ /* "monitorx %eax, %ecx, %edx;" */
+ asm volatile(".byte 0x0f, 0x01, 0xfa;"
+ :: "a" (eax), "c" (ecx), "d"(edx));
+}
+
static inline void __mwait(unsigned long eax, unsigned long ecx)
{
/* "mwait %eax, %ecx;" */
@@ -30,6 +41,40 @@ static inline void __mwait(unsigned long eax, unsigned long ecx)
:: "a" (eax), "c" (ecx));
}
+/*
+ * MWAITX allows for a timer expiration to get the core out a wait state in
+ * addition to the default MWAIT exit condition of a store appearing at a
+ * monitored virtual address.
+ *
+ * Registers:
+ *
+ * MWAITX ECX[1]: enable timer if set
+ * MWAITX EBX[31:0]: max wait time expressed in SW P0 clocks. The software P0
+ * frequency is the same as the TSC frequency.
+ *
+ * Below is a comparison between MWAIT and MWAITX on AMD processors:
+ *
+ * MWAIT MWAITX
+ * opcode 0f 01 c9 | 0f 01 fb
+ * ECX[0] value of RFLAGS.IF seen by instruction
+ * ECX[1] unused/#GP if set | enable timer if set
+ * ECX[31:2] unused/#GP if set
+ * EAX unused (reserve for hint)
+ * EBX[31:0] unused | max wait time (P0 clocks)
+ *
+ * MONITOR MONITORX
+ * opcode 0f 01 c8 | 0f 01 fa
+ * EAX (logical) address to monitor
+ * ECX #GP if not zero
+ */
+static inline void __mwaitx(unsigned long eax, unsigned long ebx,
+ unsigned long ecx)
+{
+ /* "mwaitx %eax, %ebx, %ecx;" */
+ asm volatile(".byte 0x0f, 0x01, 0xfb;"
+ :: "a" (eax), "b" (ebx), "c" (ecx));
+}
+
static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
{
trace_hardirqs_on();