1 files changed, 17 insertions, 12 deletions

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 90d64081d..0ca74d070 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -50,7 +50,8 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
 	struct private_data *priv = policy->driver_data;
 	struct device *cpu_dev = priv->cpu_dev;
 	struct regulator *cpu_reg = priv->cpu_reg;
-	unsigned long volt = 0, volt_old = 0, tol = 0;
+	unsigned long volt = 0, tol = 0;
+	int volt_old = 0;
 	unsigned int old_freq, new_freq;
 	long freq_Hz, freq_exact;
 	int ret;
@@ -83,7 +84,7 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
 			opp_freq / 1000, volt);
 	}
 
-	dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
+	dev_dbg(cpu_dev, "%u MHz, %d mV --> %u MHz, %ld mV\n",
 		old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1,
 		new_freq / 1000, volt ? volt / 1000 : -1);
 
@@ -141,15 +142,16 @@ static int allocate_resources(int cpu, struct device **cdev,
 
 try_again:
 	cpu_reg = regulator_get_optional(cpu_dev, reg);
-	if (IS_ERR(cpu_reg)) {
+	ret = PTR_ERR_OR_ZERO(cpu_reg);
+	if (ret) {
 		/*
 		 * If cpu's regulator supply node is present, but regulator is
 		 * not yet registered, we should try defering probe.
 		 */
-		if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) {
+		if (ret == -EPROBE_DEFER) {
 			dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n",
 				cpu);
-			return -EPROBE_DEFER;
+			return ret;
 		}
 
 		/* Try with "cpu-supply" */
@@ -158,18 +160,16 @@ try_again:
 			goto try_again;
 		}
 
-		dev_dbg(cpu_dev, "no regulator for cpu%d: %ld\n",
-			cpu, PTR_ERR(cpu_reg));
+		dev_dbg(cpu_dev, "no regulator for cpu%d: %d\n", cpu, ret);
 	}
 
 	cpu_clk = clk_get(cpu_dev, NULL);
-	if (IS_ERR(cpu_clk)) {
+	ret = PTR_ERR_OR_ZERO(cpu_clk);
+	if (ret) {
 		/* put regulator */
 		if (!IS_ERR(cpu_reg))
 			regulator_put(cpu_reg);
 
-		ret = PTR_ERR(cpu_clk);
-
 		/*
 		 * If cpu's clk node is present, but clock is not yet
 		 * registered, we should try defering probe.
@@ -407,8 +407,13 @@ static void cpufreq_ready(struct cpufreq_policy *policy)
 	 * thermal DT code takes care of matching them.
 	 */
 	if (of_find_property(np, "#cooling-cells", NULL)) {
-		priv->cdev = of_cpufreq_cooling_register(np,
-							 policy->related_cpus);
+		u32 power_coefficient = 0;
+
+		of_property_read_u32(np, "dynamic-power-coefficient",
+				     &power_coefficient);
+
+		priv->cdev = of_cpufreq_power_cooling_register(np,
+				policy->related_cpus, power_coefficient, NULL);
 		if (IS_ERR(priv->cdev)) {
 			dev_err(priv->cpu_dev,
 				"running cpufreq without cooling device: %ld\n",