summaryrefslogtreecommitdiff
path: root/drivers/i2c/muxes/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/muxes/Kconfig')
-rw-r--r--drivers/i2c/muxes/Kconfig63
1 files changed, 63 insertions, 0 deletions
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
new file mode 100644
index 000000000..f6d313e52
--- /dev/null
+++ b/drivers/i2c/muxes/Kconfig
@@ -0,0 +1,63 @@
+#
+# Multiplexer I2C chip drivers configuration
+#
+
+menu "Multiplexer I2C Chip support"
+ depends on I2C_MUX
+
+config I2C_ARB_GPIO_CHALLENGE
+ tristate "GPIO-based I2C arbitration"
+ depends on GPIOLIB && OF
+ help
+ If you say yes to this option, support will be included for an
+ I2C multimaster arbitration scheme using GPIOs and a challenge &
+ response mechanism where masters have to claim the bus by asserting
+ a GPIO.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-arb-gpio-challenge.
+
+config I2C_MUX_GPIO
+ tristate "GPIO-based I2C multiplexer"
+ depends on GPIOLIB
+ help
+ If you say yes to this option, support will be included for a
+ GPIO based I2C multiplexer. This driver provides access to
+ I2C busses connected through a MUX, which is controlled
+ through GPIO pins.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-gpio.
+
+config I2C_MUX_PCA9541
+ tristate "NXP PCA9541 I2C Master Selector"
+ help
+ If you say yes here you get support for the NXP PCA9541
+ I2C Master Selector.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-pca9541.
+
+config I2C_MUX_PCA954x
+ tristate "Philips PCA954x I2C Mux/switches"
+ depends on GPIOLIB
+ help
+ If you say yes here you get support for the Philips PCA954x
+ I2C mux/switch devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-pca954x.
+
+config I2C_MUX_PINCTRL
+ tristate "pinctrl-based I2C multiplexer"
+ depends on PINCTRL
+ help
+ If you say yes to this option, support will be included for an I2C
+ multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.
+ This is useful for SoCs whose I2C module's signals can be routed to
+ different sets of pins at run-time.
+
+ This driver can also be built as a module. If so, the module will be
+ called pinctrl-i2cmux.
+
+endmenu