summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc')
-rw-r--r--drivers/iio/adc/Kconfig11
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/axp288_adc.c2
-rw-r--r--drivers/iio/adc/berlin2-adc.c378
-rw-r--r--drivers/iio/adc/mcp320x.c2
-rw-r--r--drivers/iio/adc/ti-adc128s052.c30
-rw-r--r--drivers/iio/adc/ti_am335x_adc.c83
-rw-r--r--drivers/iio/adc/twl4030-madc.c8
-rw-r--r--drivers/iio/adc/vf610_adc.c148
9 files changed, 590 insertions, 73 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 1bcb65b8d..eb0cd8977 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -135,6 +135,13 @@ config AXP288_ADC
device. Depending on platform configuration, this general purpose ADC can
be used for sampling sensors such as thermal resistors.
+config BERLIN2_ADC
+ tristate "Marvell Berlin2 ADC driver"
+ depends on ARCH_BERLIN
+ help
+ Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for
+ temperature measurement.
+
config DA9150_GPADC
tristate "Dialog DA9150 GPADC driver support"
depends on MFD_DA9150
@@ -284,11 +291,11 @@ config TI_ADC081C
called ti-adc081c.
config TI_ADC128S052
- tristate "Texas Instruments ADC128S052"
+ tristate "Texas Instruments ADC128S052/ADC122S021"
depends on SPI
help
If you say yes here you get support for Texas Instruments ADC128S052
- chip.
+ and ADC122S021 chips.
This driver can also be built as a module. If so, the module will be
called ti-adc128s052.
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 3930e63e8..a0962103e 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD799X) += ad799x.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
+obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 56008a86b..0c904edd6 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -238,7 +238,7 @@ static int axp288_adc_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_device_id axp288_adc_id_table[] = {
+static const struct platform_device_id axp288_adc_id_table[] = {
{ .name = "axp288_adc" },
{},
};
diff --git a/drivers/iio/adc/berlin2-adc.c b/drivers/iio/adc/berlin2-adc.c
new file mode 100644
index 000000000..aecc9ad99
--- /dev/null
+++ b/drivers/iio/adc/berlin2-adc.c
@@ -0,0 +1,378 @@
+/*
+ * Marvell Berlin2 ADC driver
+ *
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/machine.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+
+#define BERLIN2_SM_CTRL 0x14
+#define BERLIN2_SM_CTRL_SM_SOC_INT BIT(1)
+#define BERLIN2_SM_CTRL_SOC_SM_INT BIT(2)
+#define BERLIN2_SM_CTRL_ADC_SEL(x) (BIT(x) << 5) /* 0-15 */
+#define BERLIN2_SM_CTRL_ADC_SEL_MASK (0xf << 5)
+#define BERLIN2_SM_CTRL_ADC_POWER BIT(9)
+#define BERLIN2_SM_CTRL_ADC_CLKSEL_DIV2 (0x0 << 10)
+#define BERLIN2_SM_CTRL_ADC_CLKSEL_DIV3 (0x1 << 10)
+#define BERLIN2_SM_CTRL_ADC_CLKSEL_DIV4 (0x2 << 10)
+#define BERLIN2_SM_CTRL_ADC_CLKSEL_DIV8 (0x3 << 10)
+#define BERLIN2_SM_CTRL_ADC_CLKSEL_MASK (0x3 << 10)
+#define BERLIN2_SM_CTRL_ADC_START BIT(12)
+#define BERLIN2_SM_CTRL_ADC_RESET BIT(13)
+#define BERLIN2_SM_CTRL_ADC_BANDGAP_RDY BIT(14)
+#define BERLIN2_SM_CTRL_ADC_CONT_SINGLE (0x0 << 15)
+#define BERLIN2_SM_CTRL_ADC_CONT_CONTINUOUS (0x1 << 15)
+#define BERLIN2_SM_CTRL_ADC_BUFFER_EN BIT(16)
+#define BERLIN2_SM_CTRL_ADC_VREF_EXT (0x0 << 17)
+#define BERLIN2_SM_CTRL_ADC_VREF_INT (0x1 << 17)
+#define BERLIN2_SM_CTRL_ADC_ROTATE BIT(19)
+#define BERLIN2_SM_CTRL_TSEN_EN BIT(20)
+#define BERLIN2_SM_CTRL_TSEN_CLK_SEL_125 (0x0 << 21) /* 1.25 MHz */
+#define BERLIN2_SM_CTRL_TSEN_CLK_SEL_250 (0x1 << 21) /* 2.5 MHz */
+#define BERLIN2_SM_CTRL_TSEN_MODE_0_125 (0x0 << 22) /* 0-125 C */
+#define BERLIN2_SM_CTRL_TSEN_MODE_10_50 (0x1 << 22) /* 10-50 C */
+#define BERLIN2_SM_CTRL_TSEN_RESET BIT(29)
+#define BERLIN2_SM_ADC_DATA 0x20
+#define BERLIN2_SM_ADC_MASK 0x3ff
+#define BERLIN2_SM_ADC_STATUS 0x1c
+#define BERLIN2_SM_ADC_STATUS_DATA_RDY(x) BIT(x) /* 0-15 */
+#define BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK 0xf
+#define BERLIN2_SM_ADC_STATUS_INT_EN(x) (BIT(x) << 16) /* 0-15 */
+#define BERLIN2_SM_ADC_STATUS_INT_EN_MASK (0xf << 16)
+#define BERLIN2_SM_TSEN_STATUS 0x24
+#define BERLIN2_SM_TSEN_STATUS_DATA_RDY BIT(0)
+#define BERLIN2_SM_TSEN_STATUS_INT_EN BIT(1)
+#define BERLIN2_SM_TSEN_DATA 0x28
+#define BERLIN2_SM_TSEN_MASK 0xfff
+#define BERLIN2_SM_TSEN_CTRL 0x74
+#define BERLIN2_SM_TSEN_CTRL_START BIT(8)
+#define BERLIN2_SM_TSEN_CTRL_SETTLING_4 (0x0 << 21) /* 4 us */
+#define BERLIN2_SM_TSEN_CTRL_SETTLING_12 (0x1 << 21) /* 12 us */
+#define BERLIN2_SM_TSEN_CTRL_SETTLING_MASK (0x1 << 21)
+#define BERLIN2_SM_TSEN_CTRL_TRIM(x) ((x) << 22)
+#define BERLIN2_SM_TSEN_CTRL_TRIM_MASK (0xf << 22)
+
+struct berlin2_adc_priv {
+ struct regmap *regmap;
+ struct mutex lock;
+ wait_queue_head_t wq;
+ bool data_available;
+ int data;
+};
+
+#define BERLIN2_ADC_CHANNEL(n, t) \
+ { \
+ .channel = n, \
+ .datasheet_name = "channel"#n, \
+ .type = t, \
+ .indexed = 1, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ }
+
+static struct iio_chan_spec berlin2_adc_channels[] = {
+ BERLIN2_ADC_CHANNEL(0, IIO_VOLTAGE), /* external input */
+ BERLIN2_ADC_CHANNEL(1, IIO_VOLTAGE), /* external input */
+ BERLIN2_ADC_CHANNEL(2, IIO_VOLTAGE), /* external input */
+ BERLIN2_ADC_CHANNEL(3, IIO_VOLTAGE), /* external input */
+ BERLIN2_ADC_CHANNEL(4, IIO_VOLTAGE), /* reserved */
+ BERLIN2_ADC_CHANNEL(5, IIO_VOLTAGE), /* reserved */
+ { /* temperature sensor */
+ .channel = 6,
+ .datasheet_name = "channel6",
+ .type = IIO_TEMP,
+ .indexed = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+ BERLIN2_ADC_CHANNEL(7, IIO_VOLTAGE), /* reserved */
+ IIO_CHAN_SOFT_TIMESTAMP(8), /* timestamp */
+};
+#define BERLIN2_N_CHANNELS ARRAY_SIZE(berlin2_adc_channels)
+
+static int berlin2_adc_read(struct iio_dev *indio_dev, int channel)
+{
+ struct berlin2_adc_priv *priv = iio_priv(indio_dev);
+ int data, ret;
+
+ mutex_lock(&priv->lock);
+
+ /* Configure the ADC */
+ regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
+ BERLIN2_SM_CTRL_ADC_RESET | BERLIN2_SM_CTRL_ADC_SEL_MASK
+ | BERLIN2_SM_CTRL_ADC_START,
+ BERLIN2_SM_CTRL_ADC_SEL(channel) | BERLIN2_SM_CTRL_ADC_START);
+
+ ret = wait_event_interruptible_timeout(priv->wq, priv->data_available,
+ msecs_to_jiffies(1000));
+
+ /* Disable the interrupts */
+ regmap_update_bits(priv->regmap, BERLIN2_SM_ADC_STATUS,
+ BERLIN2_SM_ADC_STATUS_INT_EN(channel), 0);
+
+ if (ret == 0)
+ ret = -ETIMEDOUT;
+ if (ret < 0) {
+ mutex_unlock(&priv->lock);
+ return ret;
+ }
+
+ regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
+ BERLIN2_SM_CTRL_ADC_START, 0);
+
+ data = priv->data;
+ priv->data_available = false;
+
+ mutex_unlock(&priv->lock);
+
+ return data;
+}
+
+static int berlin2_adc_tsen_read(struct iio_dev *indio_dev)
+{
+ struct berlin2_adc_priv *priv = iio_priv(indio_dev);
+ int data, ret;
+
+ mutex_lock(&priv->lock);
+
+ /* Configure the ADC */
+ regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
+ BERLIN2_SM_CTRL_TSEN_RESET | BERLIN2_SM_CTRL_ADC_ROTATE,
+ BERLIN2_SM_CTRL_ADC_ROTATE);
+
+ /* Configure the temperature sensor */
+ regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_CTRL,
+ BERLIN2_SM_TSEN_CTRL_TRIM_MASK | BERLIN2_SM_TSEN_CTRL_SETTLING_MASK
+ | BERLIN2_SM_TSEN_CTRL_START,
+ BERLIN2_SM_TSEN_CTRL_TRIM(3) | BERLIN2_SM_TSEN_CTRL_SETTLING_12
+ | BERLIN2_SM_TSEN_CTRL_START);
+
+ ret = wait_event_interruptible_timeout(priv->wq, priv->data_available,
+ msecs_to_jiffies(1000));
+
+ /* Disable interrupts */
+ regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_STATUS,
+ BERLIN2_SM_TSEN_STATUS_INT_EN, 0);
+
+ if (ret == 0)
+ ret = -ETIMEDOUT;
+ if (ret < 0) {
+ mutex_unlock(&priv->lock);
+ return ret;
+ }
+
+ regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_CTRL,
+ BERLIN2_SM_TSEN_CTRL_START, 0);
+
+ data = priv->data;
+ priv->data_available = false;
+
+ mutex_unlock(&priv->lock);
+
+ return data;
+}
+
+static int berlin2_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2,
+ long mask)
+{
+ struct berlin2_adc_priv *priv = iio_priv(indio_dev);
+ int temp;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (chan->type != IIO_VOLTAGE)
+ return -EINVAL;
+
+ /* Enable the interrupts */
+ regmap_write(priv->regmap, BERLIN2_SM_ADC_STATUS,
+ BERLIN2_SM_ADC_STATUS_INT_EN(chan->channel));
+
+ *val = berlin2_adc_read(indio_dev, chan->channel);
+ if (*val < 0)
+ return *val;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_PROCESSED:
+ if (chan->type != IIO_TEMP)
+ return -EINVAL;
+
+ /* Enable interrupts */
+ regmap_write(priv->regmap, BERLIN2_SM_TSEN_STATUS,
+ BERLIN2_SM_TSEN_STATUS_INT_EN);
+
+ temp = berlin2_adc_tsen_read(indio_dev);
+ if (temp < 0)
+ return temp;
+
+ if (temp > 2047)
+ temp = -(4096 - temp);
+
+ /* Convert to milli Celsius */
+ *val = ((temp * 100000) / 264 - 270000);
+ return IIO_VAL_INT;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static irqreturn_t berlin2_adc_irq(int irq, void *private)
+{
+ struct berlin2_adc_priv *priv = iio_priv(private);
+ unsigned val;
+
+ regmap_read(priv->regmap, BERLIN2_SM_ADC_STATUS, &val);
+ if (val & BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK) {
+ regmap_read(priv->regmap, BERLIN2_SM_ADC_DATA, &priv->data);
+ priv->data &= BERLIN2_SM_ADC_MASK;
+
+ val &= ~BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK;
+ regmap_write(priv->regmap, BERLIN2_SM_ADC_STATUS, val);
+
+ priv->data_available = true;
+ wake_up_interruptible(&priv->wq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t berlin2_adc_tsen_irq(int irq, void *private)
+{
+ struct berlin2_adc_priv *priv = iio_priv(private);
+ unsigned val;
+
+ regmap_read(priv->regmap, BERLIN2_SM_TSEN_STATUS, &val);
+ if (val & BERLIN2_SM_TSEN_STATUS_DATA_RDY) {
+ regmap_read(priv->regmap, BERLIN2_SM_TSEN_DATA, &priv->data);
+ priv->data &= BERLIN2_SM_TSEN_MASK;
+
+ val &= ~BERLIN2_SM_TSEN_STATUS_DATA_RDY;
+ regmap_write(priv->regmap, BERLIN2_SM_TSEN_STATUS, val);
+
+ priv->data_available = true;
+ wake_up_interruptible(&priv->wq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static const struct iio_info berlin2_adc_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = berlin2_adc_read_raw,
+};
+
+static int berlin2_adc_probe(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev;
+ struct berlin2_adc_priv *priv;
+ struct device_node *parent_np = of_get_parent(pdev->dev.of_node);
+ int irq, tsen_irq;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev,
+ sizeof(struct berlin2_adc_priv));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ priv = iio_priv(indio_dev);
+ platform_set_drvdata(pdev, indio_dev);
+
+ priv->regmap = syscon_node_to_regmap(parent_np);
+ of_node_put(parent_np);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ irq = platform_get_irq_byname(pdev, "adc");
+ if (irq < 0)
+ return -ENODEV;
+
+ tsen_irq = platform_get_irq_byname(pdev, "tsen");
+ if (tsen_irq < 0)
+ return -ENODEV;
+
+ ret = devm_request_irq(&pdev->dev, irq, berlin2_adc_irq, 0,
+ pdev->dev.driver->name, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = devm_request_irq(&pdev->dev, tsen_irq, berlin2_adc_tsen_irq,
+ 0, pdev->dev.driver->name, indio_dev);
+ if (ret)
+ return ret;
+
+ init_waitqueue_head(&priv->wq);
+ mutex_init(&priv->lock);
+
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &berlin2_adc_info;
+
+ indio_dev->num_channels = BERLIN2_N_CHANNELS;
+ indio_dev->channels = berlin2_adc_channels;
+
+ /* Power up the ADC */
+ regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
+ BERLIN2_SM_CTRL_ADC_POWER, BERLIN2_SM_CTRL_ADC_POWER);
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ /* Power down the ADC */
+ regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
+ BERLIN2_SM_CTRL_ADC_POWER, 0);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int berlin2_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct berlin2_adc_priv *priv = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ /* Power down the ADC */
+ regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
+ BERLIN2_SM_CTRL_ADC_POWER, 0);
+
+ return 0;
+}
+
+static const struct of_device_id berlin2_adc_match[] = {
+ { .compatible = "marvell,berlin2-adc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, berlin2_adc_match);
+
+static struct platform_driver berlin2_adc_driver = {
+ .driver = {
+ .name = "berlin2-adc",
+ .of_match_table = berlin2_adc_match,
+ },
+ .probe = berlin2_adc_probe,
+ .remove = berlin2_adc_remove,
+};
+module_platform_driver(berlin2_adc_driver);
+
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Berlin2 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index 8d9c9b921..d819823f7 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -299,6 +299,8 @@ static int mcp320x_probe(struct spi_device *spi)
indio_dev->channels = chip_info->channels;
indio_dev->num_channels = chip_info->num_channels;
+ adc->chip_info = chip_info;
+
adc->transfer[0].tx_buf = &adc->tx_buf;
adc->transfer[0].len = sizeof(adc->tx_buf);
adc->transfer[1].rx_buf = adc->rx_buf;
diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c
index 655cb564e..915be6b60 100644
--- a/drivers/iio/adc/ti-adc128s052.c
+++ b/drivers/iio/adc/ti-adc128s052.c
@@ -1,9 +1,10 @@
/*
* Copyright (C) 2014 Angelo Compagnucci <angelo.compagnucci@gmail.com>
*
- * Driver for Texas Instruments' ADC128S052 ADC chip.
- * Datasheet can be found here:
+ * Driver for Texas Instruments' ADC128S052 and ADC122S021 ADC chip.
+ * Datasheets can be found here:
* http://www.ti.com/lit/ds/symlink/adc128s052.pdf
+ * http://www.ti.com/lit/ds/symlink/adc122s021.pdf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -16,6 +17,11 @@
#include <linux/iio/iio.h>
#include <linux/regulator/consumer.h>
+struct adc128_configuration {
+ const struct iio_chan_spec *channels;
+ u8 num_channels;
+};
+
struct adc128 {
struct spi_device *spi;
@@ -92,7 +98,7 @@ static int adc128_read_raw(struct iio_dev *indio_dev,
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
}
-static const struct iio_chan_spec adc128_channels[] = {
+static const struct iio_chan_spec adc128s052_channels[] = {
ADC128_VOLTAGE_CHANNEL(0),
ADC128_VOLTAGE_CHANNEL(1),
ADC128_VOLTAGE_CHANNEL(2),
@@ -103,6 +109,16 @@ static const struct iio_chan_spec adc128_channels[] = {
ADC128_VOLTAGE_CHANNEL(7),
};
+static const struct iio_chan_spec adc122s021_channels[] = {
+ ADC128_VOLTAGE_CHANNEL(0),
+ ADC128_VOLTAGE_CHANNEL(1),
+};
+
+static const struct adc128_configuration adc128_config[] = {
+ { adc128s052_channels, ARRAY_SIZE(adc128s052_channels) },
+ { adc122s021_channels, ARRAY_SIZE(adc122s021_channels) },
+};
+
static const struct iio_info adc128_info = {
.read_raw = adc128_read_raw,
.driver_module = THIS_MODULE,
@@ -112,6 +128,7 @@ static int adc128_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
struct adc128 *adc;
+ int config = spi_get_device_id(spi)->driver_data;
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
@@ -128,8 +145,8 @@ static int adc128_probe(struct spi_device *spi)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &adc128_info;
- indio_dev->channels = adc128_channels;
- indio_dev->num_channels = ARRAY_SIZE(adc128_channels);
+ indio_dev->channels = adc128_config[config].channels;
+ indio_dev->num_channels = adc128_config[config].num_channels;
adc->reg = devm_regulator_get(&spi->dev, "vref");
if (IS_ERR(adc->reg))
@@ -158,7 +175,8 @@ static int adc128_remove(struct spi_device *spi)
}
static const struct spi_device_id adc128_id[] = {
- { "adc128s052", 0},
+ { "adc128s052", 0}, /* index into adc128_config */
+ { "adc122s021", 1},
{ }
};
MODULE_DEVICE_TABLE(spi, adc128_id);
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index a0e7161f0..942320e32 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -37,6 +37,7 @@ struct tiadc_device {
u8 channel_step[8];
int buffer_en_ch_steps;
u16 data[8];
+ u32 open_delay[8], sample_delay[8], step_avg[8];
};
static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
@@ -85,6 +86,7 @@ static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
static void tiadc_step_config(struct iio_dev *indio_dev)
{
struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ struct device *dev = adc_dev->mfd_tscadc->dev;
unsigned int stepconfig;
int i, steps = 0;
@@ -98,20 +100,47 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
* needs to be given to ADC to digitalize data.
*/
- if (iio_buffer_enabled(indio_dev))
- stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
- | STEPCONFIG_MODE_SWCNT;
- else
- stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
for (i = 0; i < adc_dev->channels; i++) {
int chan;
chan = adc_dev->channel_line[i];
+
+ if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) {
+ dev_warn(dev, "chan %d step_avg truncating to %d\n",
+ chan, STEPCONFIG_AVG_16);
+ adc_dev->step_avg[i] = STEPCONFIG_AVG_16;
+ }
+
+ if (adc_dev->step_avg[i])
+ stepconfig =
+ STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
+ STEPCONFIG_FIFO1;
+ else
+ stepconfig = STEPCONFIG_FIFO1;
+
+ if (iio_buffer_enabled(indio_dev))
+ stepconfig |= STEPCONFIG_MODE_SWCNT;
+
tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
stepconfig | STEPCONFIG_INP(chan));
+
+ if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK) {
+ dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n",
+ chan);
+ adc_dev->open_delay[i] = STEPDELAY_OPEN_MASK;
+ }
+
+ if (adc_dev->sample_delay[i] > 0xFF) {
+ dev_warn(dev, "chan %d sample delay truncating to 0xFF\n",
+ chan);
+ adc_dev->sample_delay[i] = 0xFF;
+ }
+
tiadc_writel(adc_dev, REG_STEPDELAY(steps),
- STEPCONFIG_OPENDLY);
+ STEPDELAY_OPEN(adc_dev->open_delay[i]) |
+ STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
+
adc_dev->channel_step[i] = steps;
steps++;
}
@@ -395,16 +424,43 @@ static const struct iio_info tiadc_info = {
.driver_module = THIS_MODULE,
};
+static int tiadc_parse_dt(struct platform_device *pdev,
+ struct tiadc_device *adc_dev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct property *prop;
+ const __be32 *cur;
+ int channels = 0;
+ u32 val;
+
+ of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
+ adc_dev->channel_line[channels] = val;
+
+ /* Set Default values for optional DT parameters */
+ adc_dev->open_delay[channels] = STEPCONFIG_OPENDLY;
+ adc_dev->sample_delay[channels] = STEPCONFIG_SAMPLEDLY;
+ adc_dev->step_avg[channels] = 16;
+
+ channels++;
+ }
+
+ of_property_read_u32_array(node, "ti,chan-step-avg",
+ adc_dev->step_avg, channels);
+ of_property_read_u32_array(node, "ti,chan-step-opendelay",
+ adc_dev->open_delay, channels);
+ of_property_read_u32_array(node, "ti,chan-step-sampledelay",
+ adc_dev->sample_delay, channels);
+
+ adc_dev->channels = channels;
+ return 0;
+}
+
static int tiadc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
struct tiadc_device *adc_dev;
struct device_node *node = pdev->dev.of_node;
- struct property *prop;
- const __be32 *cur;
int err;
- u32 val;
- int channels = 0;
if (!node) {
dev_err(&pdev->dev, "Could not find valid DT data.\n");
@@ -420,12 +476,7 @@ static int tiadc_probe(struct platform_device *pdev)
adc_dev = iio_priv(indio_dev);
adc_dev->mfd_tscadc = ti_tscadc_dev_get(pdev);
-
- of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
- adc_dev->channel_line[channels] = val;
- channels++;
- }
- adc_dev->channels = channels;
+ tiadc_parse_dt(pdev, adc_dev);
indio_dev->dev.parent = &pdev->dev;
indio_dev->name = dev_name(&pdev->dev);
diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
index 4caecbea4..ebe415f10 100644
--- a/drivers/iio/adc/twl4030-madc.c
+++ b/drivers/iio/adc/twl4030-madc.c
@@ -235,7 +235,7 @@ static int twl4030battery_temperature(int raw_volt)
if (ret < 0)
return ret;
- curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10;
+ curr = ((val & TWL4030_BCI_ITHSENS) + 1) * 10;
/* Getting and calculating the thermistor resistance in ohms */
res = volt * 1000 / curr;
/* calculating temperature */
@@ -662,10 +662,8 @@ EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion);
*
* @madc: pointer to twl4030_madc_data struct
* @chan: can be one of the two values:
- * TWL4030_BCI_ITHEN
- * Enables bias current for main battery type reading
- * TWL4030_BCI_TYPEN
- * Enables bias current for main battery temperature sensing
+ * 0 - Enables bias current for main battery type reading
+ * 1 - Enables bias current for main battery temperature sensing
* @on: enable or disable chan.
*
* Function to enable or disable bias current for
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
index 56292ae45..819632bf1 100644
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -118,15 +118,21 @@ enum average_sel {
VF610_ADC_SAMPLE_32,
};
+enum conversion_mode_sel {
+ VF610_ADC_CONV_NORMAL,
+ VF610_ADC_CONV_HIGH_SPEED,
+ VF610_ADC_CONV_LOW_POWER,
+};
+
struct vf610_adc_feature {
enum clk_sel clk_sel;
enum vol_ref vol_ref;
+ enum conversion_mode_sel conv_mode;
int clk_div;
int sample_rate;
int res_mode;
- bool lpm;
bool calibration;
bool ovwren;
};
@@ -139,6 +145,8 @@ struct vf610_adc {
u32 vref_uv;
u32 value;
struct regulator *vref;
+
+ u32 max_adck_rate[3];
struct vf610_adc_feature adc_feature;
u32 sample_freq_avail[5];
@@ -148,46 +156,22 @@ struct vf610_adc {
static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 };
-#define VF610_ADC_CHAN(_idx, _chan_type) { \
- .type = (_chan_type), \
- .indexed = 1, \
- .channel = (_idx), \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
- BIT(IIO_CHAN_INFO_SAMP_FREQ), \
-}
-
-#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \
- .type = (_chan_type), \
- .channel = (_idx), \
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
-}
-
-static const struct iio_chan_spec vf610_adc_iio_channels[] = {
- VF610_ADC_CHAN(0, IIO_VOLTAGE),
- VF610_ADC_CHAN(1, IIO_VOLTAGE),
- VF610_ADC_CHAN(2, IIO_VOLTAGE),
- VF610_ADC_CHAN(3, IIO_VOLTAGE),
- VF610_ADC_CHAN(4, IIO_VOLTAGE),
- VF610_ADC_CHAN(5, IIO_VOLTAGE),
- VF610_ADC_CHAN(6, IIO_VOLTAGE),
- VF610_ADC_CHAN(7, IIO_VOLTAGE),
- VF610_ADC_CHAN(8, IIO_VOLTAGE),
- VF610_ADC_CHAN(9, IIO_VOLTAGE),
- VF610_ADC_CHAN(10, IIO_VOLTAGE),
- VF610_ADC_CHAN(11, IIO_VOLTAGE),
- VF610_ADC_CHAN(12, IIO_VOLTAGE),
- VF610_ADC_CHAN(13, IIO_VOLTAGE),
- VF610_ADC_CHAN(14, IIO_VOLTAGE),
- VF610_ADC_CHAN(15, IIO_VOLTAGE),
- VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP),
- /* sentinel */
-};
-
static inline void vf610_adc_calculate_rates(struct vf610_adc *info)
{
+ struct vf610_adc_feature *adc_feature = &info->adc_feature;
unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk);
- int i;
+ int divisor, i;
+
+ adck_rate = info->max_adck_rate[adc_feature->conv_mode];
+
+ if (adck_rate) {
+ /* calculate clk divider which is within specification */
+ divisor = ipg_rate / adck_rate;
+ adc_feature->clk_div = 1 << fls(divisor + 1);
+ } else {
+ /* fall-back value using a safe divisor */
+ adc_feature->clk_div = 8;
+ }
/*
* Calculate ADC sample frequencies
@@ -219,10 +203,8 @@ static inline void vf610_adc_cfg_init(struct vf610_adc *info)
adc_feature->res_mode = 12;
adc_feature->sample_rate = 1;
- adc_feature->lpm = true;
- /* Use a save ADCK which is below 20MHz on all devices */
- adc_feature->clk_div = 8;
+ adc_feature->conv_mode = VF610_ADC_CONV_LOW_POWER;
vf610_adc_calculate_rates(info);
}
@@ -304,10 +286,12 @@ static void vf610_adc_cfg_set(struct vf610_adc *info)
cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
cfg_data &= ~VF610_ADC_ADLPC_EN;
- if (adc_feature->lpm)
+ if (adc_feature->conv_mode == VF610_ADC_CONV_LOW_POWER)
cfg_data |= VF610_ADC_ADLPC_EN;
cfg_data &= ~VF610_ADC_ADHSC_EN;
+ if (adc_feature->conv_mode == VF610_ADC_CONV_HIGH_SPEED)
+ cfg_data |= VF610_ADC_ADHSC_EN;
writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
}
@@ -409,6 +393,81 @@ static void vf610_adc_hw_init(struct vf610_adc *info)
vf610_adc_cfg_set(info);
}
+static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ unsigned int mode)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ info->adc_feature.conv_mode = mode;
+ vf610_adc_calculate_rates(info);
+ vf610_adc_hw_init(info);
+ mutex_unlock(&indio_dev->mlock);
+
+ return 0;
+}
+
+static int vf610_get_conversion_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+
+ return info->adc_feature.conv_mode;
+}
+
+static const char * const vf610_conv_modes[] = { "normal", "high-speed",
+ "low-power" };
+
+static const struct iio_enum vf610_conversion_mode = {
+ .items = vf610_conv_modes,
+ .num_items = ARRAY_SIZE(vf610_conv_modes),
+ .get = vf610_get_conversion_mode,
+ .set = vf610_set_conversion_mode,
+};
+
+static const struct iio_chan_spec_ext_info vf610_ext_info[] = {
+ IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, &vf610_conversion_mode),
+ {},
+};
+
+#define VF610_ADC_CHAN(_idx, _chan_type) { \
+ .type = (_chan_type), \
+ .indexed = 1, \
+ .channel = (_idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .ext_info = vf610_ext_info, \
+}
+
+#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \
+ .type = (_chan_type), \
+ .channel = (_idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+}
+
+static const struct iio_chan_spec vf610_adc_iio_channels[] = {
+ VF610_ADC_CHAN(0, IIO_VOLTAGE),
+ VF610_ADC_CHAN(1, IIO_VOLTAGE),
+ VF610_ADC_CHAN(2, IIO_VOLTAGE),
+ VF610_ADC_CHAN(3, IIO_VOLTAGE),
+ VF610_ADC_CHAN(4, IIO_VOLTAGE),
+ VF610_ADC_CHAN(5, IIO_VOLTAGE),
+ VF610_ADC_CHAN(6, IIO_VOLTAGE),
+ VF610_ADC_CHAN(7, IIO_VOLTAGE),
+ VF610_ADC_CHAN(8, IIO_VOLTAGE),
+ VF610_ADC_CHAN(9, IIO_VOLTAGE),
+ VF610_ADC_CHAN(10, IIO_VOLTAGE),
+ VF610_ADC_CHAN(11, IIO_VOLTAGE),
+ VF610_ADC_CHAN(12, IIO_VOLTAGE),
+ VF610_ADC_CHAN(13, IIO_VOLTAGE),
+ VF610_ADC_CHAN(14, IIO_VOLTAGE),
+ VF610_ADC_CHAN(15, IIO_VOLTAGE),
+ VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP),
+ /* sentinel */
+};
+
static int vf610_adc_read_data(struct vf610_adc *info)
{
int result;
@@ -576,7 +635,7 @@ static int vf610_adc_reg_access(struct iio_dev *indio_dev,
struct vf610_adc *info = iio_priv(indio_dev);
if ((readval == NULL) ||
- (!(reg % 4) || (reg > VF610_REG_ADC_PCTL)))
+ ((reg % 4) || (reg > VF610_REG_ADC_PCTL)))
return -EINVAL;
*readval = readl(info->regs + reg);
@@ -651,6 +710,9 @@ static int vf610_adc_probe(struct platform_device *pdev)
info->vref_uv = regulator_get_voltage(info->vref);
+ of_property_read_u32_array(pdev->dev.of_node, "fsl,adck-max-frequency",
+ info->max_adck_rate, 3);
+
platform_set_drvdata(pdev, indio_dev);
init_completion(&info->completion);
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-19 14:06:36 +0000