summaryrefslogtreecommitdiff
path: root/drivers/isdn/i4l/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/i4l/Kconfig')
-rw-r--r--drivers/isdn/i4l/Kconfig140
1 files changed, 140 insertions, 0 deletions
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig
new file mode 100644
index 000000000..9c6650ea8
--- /dev/null
+++ b/drivers/isdn/i4l/Kconfig
@@ -0,0 +1,140 @@
+#
+# Old ISDN4Linux config
+#
+
+if ISDN_I4L
+
+config ISDN_PPP
+ bool "Support synchronous PPP"
+ depends on INET
+ select SLHC
+ help
+ Over digital connections such as ISDN, there is no need to
+ synchronize sender and recipient's clocks with start and stop bits
+ as is done over analog telephone lines. Instead, one can use
+ "synchronous PPP". Saying Y here will include this protocol. This
+ protocol is used by Cisco and Sun for example. So you want to say Y
+ here if the other end of your ISDN connection supports it. You will
+ need a special version of pppd (called ipppd) for using this
+ feature. See <file:Documentation/isdn/README.syncppp> and
+ <file:Documentation/isdn/syncPPP.FAQ> for more information.
+
+config ISDN_PPP_VJ
+ bool "Use VJ-compression with synchronous PPP"
+ depends on ISDN_PPP
+ help
+ This enables Van Jacobson header compression for synchronous PPP.
+ Say Y if the other end of the connection supports it.
+
+config ISDN_MPP
+ bool "Support generic MP (RFC 1717)"
+ depends on ISDN_PPP
+ help
+ With synchronous PPP enabled, it is possible to increase throughput
+ by bundling several ISDN-connections, using this protocol. See
+ <file:Documentation/isdn/README.syncppp> for more information.
+
+config IPPP_FILTER
+ bool "Filtering for synchronous PPP"
+ depends on ISDN_PPP
+ help
+ Say Y here if you want to be able to filter the packets passing over
+ IPPP interfaces. This allows you to control which packets count as
+ activity (i.e. which packets will reset the idle timer or bring up
+ a demand-dialled link) and which packets are to be dropped entirely.
+ You need to say Y here if you wish to use the pass-filter and
+ active-filter options to ipppd.
+
+config ISDN_PPP_BSDCOMP
+ tristate "Support BSD compression"
+ depends on ISDN_PPP
+ help
+ Support for the BSD-Compress compression method for PPP, which uses
+ the LZW compression method to compress each PPP packet before it is
+ sent over the wire. The machine at the other end of the PPP link
+ (usually your ISP) has to support the BSD-Compress compression
+ method as well for this to be useful. Even if they don't support it,
+ it is safe to say Y here.
+
+config ISDN_AUDIO
+ bool "Support audio via ISDN"
+ help
+ If you say Y here, the modem-emulator will support a subset of the
+ EIA Class 8 Voice commands. Using a getty with voice-support
+ (mgetty+sendfax by <gert@greenie.muc.de> with an extension, available
+ with the ISDN utility package for example), you will be able to use
+ your Linux box as an ISDN-answering machine. Of course, this must be
+ supported by the lowlevel driver also. Currently, the HiSax driver
+ is the only voice-supporting driver. See
+ <file:Documentation/isdn/README.audio> for more information.
+
+config ISDN_TTY_FAX
+ bool "Support AT-Fax Class 1 and 2 commands"
+ depends on ISDN_AUDIO
+ help
+ If you say Y here, the modem-emulator will support a subset of the
+ Fax Class 1 and 2 commands. Using a getty with fax-support
+ (mgetty+sendfax, hylafax), you will be able to use your Linux box as
+ an ISDN-fax-machine. This must be supported by the lowlevel driver
+ also. See <file:Documentation/isdn/README.fax> for more information.
+
+config ISDN_X25
+ bool "X.25 PLP on top of ISDN"
+ depends on X25
+ help
+ This feature provides the X.25 protocol over ISDN connections.
+ See <file:Documentation/isdn/README.x25> for more information
+ if you are thinking about using this.
+
+
+menu "ISDN feature submodules"
+
+config ISDN_DRV_LOOP
+ tristate "isdnloop support"
+ depends on BROKEN_ON_SMP
+ help
+ This driver provides a virtual ISDN card. Its primary purpose is
+ testing of linklevel features or configuration without getting
+ charged by your service-provider for lots of phone calls.
+ You need will need the loopctrl utility from the latest isdn4k-utils
+ package to set up this driver.
+
+config ISDN_DIVERSION
+ tristate "Support isdn diversion services"
+ help
+ This option allows you to use some supplementary diversion
+ services in conjunction with the HiSax driver on an EURO/DSS1
+ line.
+
+ Supported options are CD (call deflection), CFU (Call forward
+ unconditional), CFB (Call forward when busy) and CFNR (call forward
+ not reachable). Additionally the actual CFU, CFB and CFNR state may
+ be interrogated.
+
+ The use of CFU, CFB, CFNR and interrogation may be limited to some
+ countries. The keypad protocol is still not implemented. CD should
+ work in all countries if the service has been subscribed to.
+
+ Please read the file <file:Documentation/isdn/README.diversion>.
+
+endmenu
+
+comment "ISDN4Linux hardware drivers"
+
+source "drivers/isdn/hisax/Kconfig"
+
+
+menu "Active cards"
+
+source "drivers/isdn/icn/Kconfig"
+
+source "drivers/isdn/pcbit/Kconfig"
+
+source "drivers/isdn/sc/Kconfig"
+
+source "drivers/isdn/act2000/Kconfig"
+
+endmenu
+# end ISDN_I4L
+endif
+