diff options
Diffstat (limited to 'drivers/misc/eeprom/at24.c')
| -rw-r--r-- | drivers/misc/eeprom/at24.c | 576 |
1 files changed, 350 insertions, 226 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 089d6943f..3cdf8e1ca 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -23,7 +23,6 @@ #include <linux/acpi.h> #include <linux/i2c.h> #include <linux/nvmem-provider.h> -#include <linux/regmap.h> #include <linux/platform_data/at24.h> /* @@ -59,6 +58,10 @@ struct at24_data { int use_smbus; int use_smbus_write; + ssize_t (*read_func)(struct at24_data *, char *, unsigned int, size_t); + ssize_t (*write_func)(struct at24_data *, + const char *, unsigned int, size_t); + /* * Lock protects against activities from other Linux tasks, * but not from changes by other I2C masters. @@ -69,7 +72,6 @@ struct at24_data { unsigned write_max; unsigned num_addresses; - struct regmap_config regmap_config; struct nvmem_config nvmem_config; struct nvmem_device *nvmem; @@ -111,25 +113,63 @@ MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)"); ((1 << AT24_SIZE_FLAGS | (_flags)) \ << AT24_SIZE_BYTELEN | ilog2(_len)) +/* + * Both reads and writes fail if the previous write didn't complete yet. This + * macro loops a few times waiting at least long enough for one entire page + * write to work while making sure that at least one iteration is run before + * checking the break condition. + * + * It takes two parameters: a variable in which the future timeout in jiffies + * will be stored and a temporary variable holding the time of the last + * iteration of processing the request. Both should be unsigned integers + * holding at least 32 bits. + */ +#define loop_until_timeout(tout, op_time) \ + for (tout = jiffies + msecs_to_jiffies(write_timeout), op_time = 0; \ + op_time ? time_before(op_time, tout) : true; \ + usleep_range(1000, 1500), op_time = jiffies) + static const struct i2c_device_id at24_ids[] = { /* needs 8 addresses as A0-A2 are ignored */ - { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) }, + { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) }, /* old variants can't be handled with this generic entry! */ - { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) }, - { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) }, + { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) }, + { "24cs01", AT24_DEVICE_MAGIC(16, + AT24_FLAG_SERIAL | AT24_FLAG_READONLY) }, + { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) }, + { "24cs02", AT24_DEVICE_MAGIC(16, + AT24_FLAG_SERIAL | AT24_FLAG_READONLY) }, + { "24mac402", AT24_DEVICE_MAGIC(48 / 8, + AT24_FLAG_MAC | AT24_FLAG_READONLY) }, + { "24mac602", AT24_DEVICE_MAGIC(64 / 8, + AT24_FLAG_MAC | AT24_FLAG_READONLY) }, /* spd is a 24c02 in memory DIMMs */ - { "spd", AT24_DEVICE_MAGIC(2048 / 8, - AT24_FLAG_READONLY | AT24_FLAG_IRUGO) }, - { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) }, + { "spd", AT24_DEVICE_MAGIC(2048 / 8, + AT24_FLAG_READONLY | AT24_FLAG_IRUGO) }, + { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) }, + { "24cs04", AT24_DEVICE_MAGIC(16, + AT24_FLAG_SERIAL | AT24_FLAG_READONLY) }, /* 24rf08 quirk is handled at i2c-core */ - { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) }, - { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) }, - { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) }, - { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) }, - { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) }, - { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) }, - { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) }, - { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) }, + { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) }, + { "24cs08", AT24_DEVICE_MAGIC(16, + AT24_FLAG_SERIAL | AT24_FLAG_READONLY) }, + { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) }, + { "24cs16", AT24_DEVICE_MAGIC(16, + AT24_FLAG_SERIAL | AT24_FLAG_READONLY) }, + { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) }, + { "24cs32", AT24_DEVICE_MAGIC(16, + AT24_FLAG_ADDR16 | + AT24_FLAG_SERIAL | + AT24_FLAG_READONLY) }, + { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) }, + { "24cs64", AT24_DEVICE_MAGIC(16, + AT24_FLAG_ADDR16 | + AT24_FLAG_SERIAL | + AT24_FLAG_READONLY) }, + { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) }, + { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) }, + { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) }, + { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) }, { "at24", 0 }, { /* END OF LIST */ } }; @@ -147,9 +187,22 @@ MODULE_DEVICE_TABLE(acpi, at24_acpi_ids); * This routine supports chips which consume multiple I2C addresses. It * computes the addressing information to be used for a given r/w request. * Assumes that sanity checks for offset happened at sysfs-layer. + * + * Slave address and byte offset derive from the offset. Always + * set the byte address; on a multi-master board, another master + * may have changed the chip's "current" address pointer. + * + * REVISIT some multi-address chips don't rollover page reads to + * the next slave address, so we may need to truncate the count. + * Those chips might need another quirk flag. + * + * If the real hardware used four adjacent 24c02 chips and that + * were misconfigured as one 24c08, that would be a similar effect: + * one "eeprom" file not four, but larger reads would fail when + * they crossed certain pages. */ static struct i2c_client *at24_translate_offset(struct at24_data *at24, - unsigned *offset) + unsigned int *offset) { unsigned i; @@ -164,126 +217,168 @@ static struct i2c_client *at24_translate_offset(struct at24_data *at24, return at24->client[i]; } -static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, - unsigned offset, size_t count) +static ssize_t at24_eeprom_read_smbus(struct at24_data *at24, char *buf, + unsigned int offset, size_t count) { - struct i2c_msg msg[2]; - u8 msgbuf[2]; + unsigned long timeout, read_time; struct i2c_client *client; + int status; + + client = at24_translate_offset(at24, &offset); + + if (count > io_limit) + count = io_limit; + + /* Smaller eeproms can work given some SMBus extension calls */ + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + + loop_until_timeout(timeout, read_time) { + status = i2c_smbus_read_i2c_block_data_or_emulated(client, + offset, + count, buf); + + dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", + count, offset, status, jiffies); + + if (status == count) + return count; + } + + return -ETIMEDOUT; +} + +static ssize_t at24_eeprom_read_i2c(struct at24_data *at24, char *buf, + unsigned int offset, size_t count) +{ unsigned long timeout, read_time; + struct i2c_client *client; + struct i2c_msg msg[2]; int status, i; + u8 msgbuf[2]; memset(msg, 0, sizeof(msg)); - - /* - * REVISIT some multi-address chips don't rollover page reads to - * the next slave address, so we may need to truncate the count. - * Those chips might need another quirk flag. - * - * If the real hardware used four adjacent 24c02 chips and that - * were misconfigured as one 24c08, that would be a similar effect: - * one "eeprom" file not four, but larger reads would fail when - * they crossed certain pages. - */ - - /* - * Slave address and byte offset derive from the offset. Always - * set the byte address; on a multi-master board, another master - * may have changed the chip's "current" address pointer. - */ client = at24_translate_offset(at24, &offset); if (count > io_limit) count = io_limit; - if (at24->use_smbus) { - /* Smaller eeproms can work given some SMBus extension calls */ - if (count > I2C_SMBUS_BLOCK_MAX) - count = I2C_SMBUS_BLOCK_MAX; - } else { - /* - * When we have a better choice than SMBus calls, use a - * combined I2C message. Write address; then read up to - * io_limit data bytes. Note that read page rollover helps us - * here (unlike writes). msgbuf is u8 and will cast to our - * needs. - */ - i = 0; - if (at24->chip.flags & AT24_FLAG_ADDR16) - msgbuf[i++] = offset >> 8; - msgbuf[i++] = offset; - - msg[0].addr = client->addr; - msg[0].buf = msgbuf; - msg[0].len = i; - - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = buf; - msg[1].len = count; - } - /* - * Reads fail if the previous write didn't complete yet. We may - * loop a few times until this one succeeds, waiting at least - * long enough for one entire page write to work. + * When we have a better choice than SMBus calls, use a combined I2C + * message. Write address; then read up to io_limit data bytes. Note + * that read page rollover helps us here (unlike writes). msgbuf is + * u8 and will cast to our needs. */ - timeout = jiffies + msecs_to_jiffies(write_timeout); - do { - read_time = jiffies; - if (at24->use_smbus) { - status = i2c_smbus_read_i2c_block_data_or_emulated(client, offset, - count, buf); - } else { - status = i2c_transfer(client->adapter, msg, 2); - if (status == 2) - status = count; - } + i = 0; + if (at24->chip.flags & AT24_FLAG_ADDR16) + msgbuf[i++] = offset >> 8; + msgbuf[i++] = offset; + + msg[0].addr = client->addr; + msg[0].buf = msgbuf; + msg[0].len = i; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + loop_until_timeout(timeout, read_time) { + status = i2c_transfer(client->adapter, msg, 2); + if (status == 2) + status = count; + dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", count, offset, status, jiffies); if (status == count) return count; - - /* REVISIT: at HZ=100, this is sloooow */ - msleep(1); - } while (time_before(read_time, timeout)); + } return -ETIMEDOUT; } -static ssize_t at24_read(struct at24_data *at24, - char *buf, loff_t off, size_t count) +static ssize_t at24_eeprom_read_serial(struct at24_data *at24, char *buf, + unsigned int offset, size_t count) { - ssize_t retval = 0; + unsigned long timeout, read_time; + struct i2c_client *client; + struct i2c_msg msg[2]; + u8 addrbuf[2]; + int status; - if (unlikely(!count)) - return count; + client = at24_translate_offset(at24, &offset); + + memset(msg, 0, sizeof(msg)); + msg[0].addr = client->addr; + msg[0].buf = addrbuf; /* - * Read data from chip, protecting against concurrent updates - * from this host, but not from other I2C masters. + * The address pointer of the device is shared between the regular + * EEPROM array and the serial number block. The dummy write (part of + * the sequential read protocol) ensures the address pointer is reset + * to the desired position. */ - mutex_lock(&at24->lock); + if (at24->chip.flags & AT24_FLAG_ADDR16) { + /* + * For 16 bit address pointers, the word address must contain + * a '10' sequence in bits 11 and 10 regardless of the + * intended position of the address pointer. + */ + addrbuf[0] = 0x08; + addrbuf[1] = offset; + msg[0].len = 2; + } else { + /* + * Otherwise the word address must begin with a '10' sequence, + * regardless of the intended address. + */ + addrbuf[0] = 0x80 + offset; + msg[0].len = 1; + } - while (count) { - ssize_t status; + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; - status = at24_eeprom_read(at24, buf, off, count); - if (status <= 0) { - if (retval == 0) - retval = status; - break; - } - buf += status; - off += status; - count -= status; - retval += status; + loop_until_timeout(timeout, read_time) { + status = i2c_transfer(client->adapter, msg, 2); + if (status == 2) + return count; } - mutex_unlock(&at24->lock); + return -ETIMEDOUT; +} + +static ssize_t at24_eeprom_read_mac(struct at24_data *at24, char *buf, + unsigned int offset, size_t count) +{ + unsigned long timeout, read_time; + struct i2c_client *client; + struct i2c_msg msg[2]; + u8 addrbuf[2]; + int status; + + client = at24_translate_offset(at24, &offset); + + memset(msg, 0, sizeof(msg)); + msg[0].addr = client->addr; + msg[0].buf = addrbuf; + addrbuf[0] = 0x90 + offset; + msg[0].len = 1; + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + loop_until_timeout(timeout, read_time) { + status = i2c_transfer(client->adapter, msg, 2); + if (status == 2) + return count; + } - return retval; + return -ETIMEDOUT; } /* @@ -291,21 +386,15 @@ static ssize_t at24_read(struct at24_data *at24, * chip is normally write protected. But there are plenty of product * variants here, including OTP fuses and partial chip protect. * - * We only use page mode writes; the alternative is sloooow. This routine - * writes at most one page. + * We only use page mode writes; the alternative is sloooow. These routines + * write at most one page. */ -static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf, - unsigned offset, size_t count) + +static size_t at24_adjust_write_count(struct at24_data *at24, + unsigned int offset, size_t count) { - struct i2c_client *client; - struct i2c_msg msg; - ssize_t status = 0; - unsigned long timeout, write_time; unsigned next_page; - /* Get corresponding I2C address and adjust offset */ - client = at24_translate_offset(at24, &offset); - /* write_max is at most a page */ if (count > at24->write_max) count = at24->write_max; @@ -315,145 +404,167 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf, if (offset + count > next_page) count = next_page - offset; - /* If we'll use I2C calls for I/O, set up the message */ - if (!at24->use_smbus) { - int i = 0; + return count; +} - msg.addr = client->addr; - msg.flags = 0; +static ssize_t at24_eeprom_write_smbus_block(struct at24_data *at24, + const char *buf, + unsigned int offset, size_t count) +{ + unsigned long timeout, write_time; + struct i2c_client *client; + ssize_t status = 0; - /* msg.buf is u8 and casts will mask the values */ - msg.buf = at24->writebuf; - if (at24->chip.flags & AT24_FLAG_ADDR16) - msg.buf[i++] = offset >> 8; + client = at24_translate_offset(at24, &offset); + count = at24_adjust_write_count(at24, offset, count); - msg.buf[i++] = offset; - memcpy(&msg.buf[i], buf, count); - msg.len = i + count; + loop_until_timeout(timeout, write_time) { + status = i2c_smbus_write_i2c_block_data(client, + offset, count, buf); + if (status == 0) + status = count; + + dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n", + count, offset, status, jiffies); + + if (status == count) + return count; } - /* - * Writes fail if the previous one didn't complete yet. We may - * loop a few times until this one succeeds, waiting at least - * long enough for one entire page write to work. - */ - timeout = jiffies + msecs_to_jiffies(write_timeout); - do { - write_time = jiffies; - if (at24->use_smbus_write) { - switch (at24->use_smbus_write) { - case I2C_SMBUS_I2C_BLOCK_DATA: - status = i2c_smbus_write_i2c_block_data(client, - offset, count, buf); - break; - case I2C_SMBUS_BYTE_DATA: - status = i2c_smbus_write_byte_data(client, - offset, buf[0]); - break; - } - - if (status == 0) - status = count; - } else { - status = i2c_transfer(client->adapter, &msg, 1); - if (status == 1) - status = count; - } + return -ETIMEDOUT; +} + +static ssize_t at24_eeprom_write_smbus_byte(struct at24_data *at24, + const char *buf, + unsigned int offset, size_t count) +{ + unsigned long timeout, write_time; + struct i2c_client *client; + ssize_t status = 0; + + client = at24_translate_offset(at24, &offset); + + loop_until_timeout(timeout, write_time) { + status = i2c_smbus_write_byte_data(client, offset, buf[0]); + if (status == 0) + status = count; + dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n", count, offset, status, jiffies); if (status == count) return count; + } + + return -ETIMEDOUT; +} + +static ssize_t at24_eeprom_write_i2c(struct at24_data *at24, const char *buf, + unsigned int offset, size_t count) +{ + unsigned long timeout, write_time; + struct i2c_client *client; + struct i2c_msg msg; + ssize_t status = 0; + int i = 0; + + client = at24_translate_offset(at24, &offset); + count = at24_adjust_write_count(at24, offset, count); + + msg.addr = client->addr; + msg.flags = 0; + + /* msg.buf is u8 and casts will mask the values */ + msg.buf = at24->writebuf; + if (at24->chip.flags & AT24_FLAG_ADDR16) + msg.buf[i++] = offset >> 8; + + msg.buf[i++] = offset; + memcpy(&msg.buf[i], buf, count); + msg.len = i + count; - /* REVISIT: at HZ=100, this is sloooow */ - msleep(1); - } while (time_before(write_time, timeout)); + loop_until_timeout(timeout, write_time) { + status = i2c_transfer(client->adapter, &msg, 1); + if (status == 1) + status = count; + + dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n", + count, offset, status, jiffies); + + if (status == count) + return count; + } return -ETIMEDOUT; } -static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, - size_t count) +static int at24_read(void *priv, unsigned int off, void *val, size_t count) { - ssize_t retval = 0; + struct at24_data *at24 = priv; + char *buf = val; if (unlikely(!count)) return count; /* - * Write data to chip, protecting against concurrent updates + * Read data from chip, protecting against concurrent updates * from this host, but not from other I2C masters. */ mutex_lock(&at24->lock); while (count) { - ssize_t status; + int status; - status = at24_eeprom_write(at24, buf, off, count); - if (status <= 0) { - if (retval == 0) - retval = status; - break; + status = at24->read_func(at24, buf, off, count); + if (status < 0) { + mutex_unlock(&at24->lock); + return status; } buf += status; off += status; count -= status; - retval += status; } mutex_unlock(&at24->lock); - return retval; + return 0; } -/*-------------------------------------------------------------------------*/ - -/* - * Provide a regmap interface, which is registered with the NVMEM - * framework -*/ -static int at24_regmap_read(void *context, const void *reg, size_t reg_size, - void *val, size_t val_size) +static int at24_write(void *priv, unsigned int off, void *val, size_t count) { - struct at24_data *at24 = context; - off_t offset = *(u32 *)reg; - int err; + struct at24_data *at24 = priv; + char *buf = val; - err = at24_read(at24, val, offset, val_size); - if (err) - return err; - return 0; -} + if (unlikely(!count)) + return -EINVAL; -static int at24_regmap_write(void *context, const void *data, size_t count) -{ - struct at24_data *at24 = context; - const char *buf; - u32 offset; - size_t len; - int err; + /* + * Write data to chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&at24->lock); - memcpy(&offset, data, sizeof(offset)); - buf = (const char *)data + sizeof(offset); - len = count - sizeof(offset); + while (count) { + int status; - err = at24_write(at24, buf, offset, len); - if (err) - return err; - return 0; -} + status = at24->write_func(at24, buf, off, count); + if (status < 0) { + mutex_unlock(&at24->lock); + return status; + } + buf += status; + off += status; + count -= status; + } -static const struct regmap_bus at24_regmap_bus = { - .read = at24_regmap_read, - .write = at24_regmap_write, - .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, -}; + mutex_unlock(&at24->lock); -/*-------------------------------------------------------------------------*/ + return 0; +} #ifdef CONFIG_OF static void at24_get_ofdata(struct i2c_client *client, - struct at24_platform_data *chip) + struct at24_platform_data *chip) { const __be32 *val; struct device_node *node = client->dev.of_node; @@ -468,7 +579,7 @@ static void at24_get_ofdata(struct i2c_client *client, } #else static void at24_get_ofdata(struct i2c_client *client, - struct at24_platform_data *chip) + struct at24_platform_data *chip) { } #endif /* CONFIG_OF */ @@ -482,7 +593,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) struct at24_data *at24; int err; unsigned i, num_addresses; - struct regmap *regmap; if (client->dev.platform_data) { chip = *(struct at24_platform_data *)client->dev.platform_data; @@ -544,10 +654,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) } else { return -EPFNOSUPPORT; } - } - /* Use I2C operations unless we're stuck with SMBus extensions. */ - if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { use_smbus_write = I2C_SMBUS_I2C_BLOCK_DATA; @@ -575,6 +682,30 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->chip = chip; at24->num_addresses = num_addresses; + if ((chip.flags & AT24_FLAG_SERIAL) && (chip.flags & AT24_FLAG_MAC)) { + dev_err(&client->dev, + "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC."); + return -EINVAL; + } + + if (chip.flags & AT24_FLAG_SERIAL) { + at24->read_func = at24_eeprom_read_serial; + } else if (chip.flags & AT24_FLAG_MAC) { + at24->read_func = at24_eeprom_read_mac; + } else { + at24->read_func = at24->use_smbus ? at24_eeprom_read_smbus + : at24_eeprom_read_i2c; + } + + if (at24->use_smbus) { + if (at24->use_smbus_write == I2C_SMBUS_I2C_BLOCK_DATA) + at24->write_func = at24_eeprom_write_smbus_block; + else + at24->write_func = at24_eeprom_write_smbus_byte; + } else { + at24->write_func = at24_eeprom_write_i2c; + } + writable = !(chip.flags & AT24_FLAG_READONLY); if (writable) { if (!use_smbus || use_smbus_write) { @@ -612,19 +743,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) } } - at24->regmap_config.reg_bits = 32; - at24->regmap_config.val_bits = 8; - at24->regmap_config.reg_stride = 1; - at24->regmap_config.max_register = chip.byte_len - 1; - - regmap = devm_regmap_init(&client->dev, &at24_regmap_bus, at24, - &at24->regmap_config); - if (IS_ERR(regmap)) { - dev_err(&client->dev, "regmap init failed\n"); - err = PTR_ERR(regmap); - goto err_clients; - } - at24->nvmem_config.name = dev_name(&client->dev); at24->nvmem_config.dev = &client->dev; at24->nvmem_config.read_only = !writable; @@ -632,6 +750,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->nvmem_config.owner = THIS_MODULE; at24->nvmem_config.compat = true; at24->nvmem_config.base_dev = &client->dev; + at24->nvmem_config.reg_read = at24_read; + at24->nvmem_config.reg_write = at24_write; + at24->nvmem_config.priv = at24; + at24->nvmem_config.stride = 4; + at24->nvmem_config.word_size = 1; + at24->nvmem_config.size = chip.byte_len; at24->nvmem = nvmem_register(&at24->nvmem_config); |