diff options
Diffstat (limited to 'drivers/net/ethernet/qlogic/qed/qed_int.h')
| -rw-r--r-- | drivers/net/ethernet/qlogic/qed/qed_int.h | 396 |
1 files changed, 396 insertions, 0 deletions
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h new file mode 100644 index 000000000..51e0b09a7 --- /dev/null +++ b/drivers/net/ethernet/qlogic/qed/qed_int.h @@ -0,0 +1,396 @@ +/* QLogic qed NIC Driver + * Copyright (c) 2015 QLogic Corporation + * + * This software is available under the terms of the GNU General Public License + * (GPL) Version 2, available from the file COPYING in the main directory of + * this source tree. + */ + +#ifndef _QED_INT_H +#define _QED_INT_H + +#include <linux/types.h> +#include <linux/slab.h> +#include "qed.h" + +/* Fields of IGU PF CONFIGRATION REGISTER */ +#define IGU_PF_CONF_FUNC_EN (0x1 << 0) /* function enable */ +#define IGU_PF_CONF_MSI_MSIX_EN (0x1 << 1) /* MSI/MSIX enable */ +#define IGU_PF_CONF_INT_LINE_EN (0x1 << 2) /* INT enable */ +#define IGU_PF_CONF_ATTN_BIT_EN (0x1 << 3) /* attention enable */ +#define IGU_PF_CONF_SINGLE_ISR_EN (0x1 << 4) /* single ISR mode enable */ +#define IGU_PF_CONF_SIMD_MODE (0x1 << 5) /* simd all ones mode */ + +/* Igu control commands + */ +enum igu_ctrl_cmd { + IGU_CTRL_CMD_TYPE_RD, + IGU_CTRL_CMD_TYPE_WR, + MAX_IGU_CTRL_CMD +}; + +/* Control register for the IGU command register + */ +struct igu_ctrl_reg { + u32 ctrl_data; +#define IGU_CTRL_REG_FID_MASK 0xFFFF /* Opaque_FID */ +#define IGU_CTRL_REG_FID_SHIFT 0 +#define IGU_CTRL_REG_PXP_ADDR_MASK 0xFFF /* Command address */ +#define IGU_CTRL_REG_PXP_ADDR_SHIFT 16 +#define IGU_CTRL_REG_RESERVED_MASK 0x1 +#define IGU_CTRL_REG_RESERVED_SHIFT 28 +#define IGU_CTRL_REG_TYPE_MASK 0x1 /* use enum igu_ctrl_cmd */ +#define IGU_CTRL_REG_TYPE_SHIFT 31 +}; + +enum qed_coalescing_fsm { + QED_COAL_RX_STATE_MACHINE, + QED_COAL_TX_STATE_MACHINE +}; + +/** + * @brief qed_int_cau_conf_pi - configure cau for a given + * status block + * + * @param p_hwfn + * @param p_ptt + * @param igu_sb_id + * @param pi_index + * @param state + * @param timeset + */ +void qed_int_cau_conf_pi(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + u16 igu_sb_id, + u32 pi_index, + enum qed_coalescing_fsm coalescing_fsm, + u8 timeset); + +/** + * @brief qed_int_igu_enable_int - enable device interrupts + * + * @param p_hwfn + * @param p_ptt + * @param int_mode - interrupt mode to use + */ +void qed_int_igu_enable_int(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + enum qed_int_mode int_mode); + +/** + * @brief qed_int_igu_disable_int - disable device interrupts + * + * @param p_hwfn + * @param p_ptt + */ +void qed_int_igu_disable_int(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); + +/** + * @brief qed_int_igu_read_sisr_reg - Reads the single isr multiple dpc + * register from igu. + * + * @param p_hwfn + * + * @return u64 + */ +u64 qed_int_igu_read_sisr_reg(struct qed_hwfn *p_hwfn); + +#define QED_SP_SB_ID 0xffff +/** + * @brief qed_int_sb_init - Initializes the sb_info structure. + * + * once the structure is initialized it can be passed to sb related functions. + * + * @param p_hwfn + * @param p_ptt + * @param sb_info points to an uninitialized (but + * allocated) sb_info structure + * @param sb_virt_addr + * @param sb_phy_addr + * @param sb_id the sb_id to be used (zero based in driver) + * should use QED_SP_SB_ID for SP Status block + * + * @return int + */ +int qed_int_sb_init(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + struct qed_sb_info *sb_info, + void *sb_virt_addr, + dma_addr_t sb_phy_addr, + u16 sb_id); +/** + * @brief qed_int_sb_setup - Setup the sb. + * + * @param p_hwfn + * @param p_ptt + * @param sb_info initialized sb_info structure + */ +void qed_int_sb_setup(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + struct qed_sb_info *sb_info); + +/** + * @brief qed_int_sb_release - releases the sb_info structure. + * + * once the structure is released, it's memory can be freed + * + * @param p_hwfn + * @param sb_info points to an allocated sb_info structure + * @param sb_id the sb_id to be used (zero based in driver) + * should never be equal to QED_SP_SB_ID + * (SP Status block) + * + * @return int + */ +int qed_int_sb_release(struct qed_hwfn *p_hwfn, + struct qed_sb_info *sb_info, + u16 sb_id); + +/** + * @brief qed_int_sp_dpc - To be called when an interrupt is received on the + * default status block. + * + * @param p_hwfn - pointer to hwfn + * + */ +void qed_int_sp_dpc(unsigned long hwfn_cookie); + +/** + * @brief qed_int_get_num_sbs - get the number of status + * blocks configured for this funciton in the igu. + * + * @param p_hwfn + * @param p_iov_blks - configured free blks for vfs + * + * @return int - number of status blocks configured + */ +int qed_int_get_num_sbs(struct qed_hwfn *p_hwfn, + int *p_iov_blks); + +/** + * @brief qed_int_disable_post_isr_release - performs the cleanup post ISR + * release. The API need to be called after releasing all slowpath IRQs + * of the device. + * + * @param cdev + * + */ +void qed_int_disable_post_isr_release(struct qed_dev *cdev); + +#define QED_CAU_DEF_RX_TIMER_RES 0 +#define QED_CAU_DEF_TX_TIMER_RES 0 + +#define QED_SB_ATT_IDX 0x0001 +#define QED_SB_EVENT_MASK 0x0003 + +#define SB_ALIGNED_SIZE(p_hwfn) \ + ALIGNED_TYPE_SIZE(struct status_block, p_hwfn) + +struct qed_igu_block { + u8 status; +#define QED_IGU_STATUS_FREE 0x01 +#define QED_IGU_STATUS_VALID 0x02 +#define QED_IGU_STATUS_PF 0x04 + + u8 vector_number; + u8 function_id; + u8 is_pf; +}; + +struct qed_igu_map { + struct qed_igu_block igu_blocks[MAX_TOT_SB_PER_PATH]; +}; + +struct qed_igu_info { + struct qed_igu_map igu_map; + u16 igu_dsb_id; + u16 igu_base_sb; + u16 igu_base_sb_iov; + u16 igu_sb_cnt; + u16 igu_sb_cnt_iov; + u16 free_blks; +}; + +/* TODO Names of function may change... */ +void qed_int_igu_init_pure_rt(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + bool b_set, + bool b_slowpath); + +void qed_int_igu_init_rt(struct qed_hwfn *p_hwfn); + +/** + * @brief qed_int_igu_read_cam - Reads the IGU CAM. + * This function needs to be called during hardware + * prepare. It reads the info from igu cam to know which + * status block is the default / base status block etc. + * + * @param p_hwfn + * @param p_ptt + * + * @return int + */ +int qed_int_igu_read_cam(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); + +typedef int (*qed_int_comp_cb_t)(struct qed_hwfn *p_hwfn, + void *cookie); +/** + * @brief qed_int_register_cb - Register callback func for + * slowhwfn statusblock. + * + * Every protocol that uses the slowhwfn status block + * should register a callback function that will be called + * once there is an update of the sp status block. + * + * @param p_hwfn + * @param comp_cb - function to be called when there is an + * interrupt on the sp sb + * + * @param cookie - passed to the callback function + * @param sb_idx - OUT parameter which gives the chosen index + * for this protocol. + * @param p_fw_cons - pointer to the actual address of the + * consumer for this protocol. + * + * @return int + */ +int qed_int_register_cb(struct qed_hwfn *p_hwfn, + qed_int_comp_cb_t comp_cb, + void *cookie, + u8 *sb_idx, + __le16 **p_fw_cons); + +/** + * @brief qed_int_unregister_cb - Unregisters callback + * function from sp sb. + * Partner of qed_int_register_cb -> should be called + * when no longer required. + * + * @param p_hwfn + * @param pi + * + * @return int + */ +int qed_int_unregister_cb(struct qed_hwfn *p_hwfn, + u8 pi); + +/** + * @brief qed_int_get_sp_sb_id - Get the slowhwfn sb id. + * + * @param p_hwfn + * + * @return u16 + */ +u16 qed_int_get_sp_sb_id(struct qed_hwfn *p_hwfn); + +/** + * @brief Status block cleanup. Should be called for each status + * block that will be used -> both PF / VF + * + * @param p_hwfn + * @param p_ptt + * @param sb_id - igu status block id + * @param cleanup_set - set(1) / clear(0) + * @param opaque_fid - the function for which to perform + * cleanup, for example a PF on behalf of + * its VFs. + */ +void qed_int_igu_cleanup_sb(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + u32 sb_id, + bool cleanup_set, + u16 opaque_fid); + +/** + * @brief Status block cleanup. Should be called for each status + * block that will be used -> both PF / VF + * + * @param p_hwfn + * @param p_ptt + * @param sb_id - igu status block id + * @param opaque - opaque fid of the sb owner. + * @param cleanup_set - set(1) / clear(0) + */ +void qed_int_igu_init_pure_rt_single(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + u32 sb_id, + u16 opaque, + bool b_set); + +/** + * @brief qed_int_cau_conf - configure cau for a given status + * block + * + * @param p_hwfn + * @param ptt + * @param sb_phys + * @param igu_sb_id + * @param vf_number + * @param vf_valid + */ +void qed_int_cau_conf_sb(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt, + dma_addr_t sb_phys, + u16 igu_sb_id, + u16 vf_number, + u8 vf_valid); + +/** + * @brief qed_int_alloc + * + * @param p_hwfn + * @param p_ptt + * + * @return int + */ +int qed_int_alloc(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); + +/** + * @brief qed_int_free + * + * @param p_hwfn + */ +void qed_int_free(struct qed_hwfn *p_hwfn); + +/** + * @brief qed_int_setup + * + * @param p_hwfn + * @param p_ptt + */ +void qed_int_setup(struct qed_hwfn *p_hwfn, + struct qed_ptt *p_ptt); + +/** + * @brief - Enable Interrupt & Attention for hw function + * + * @param p_hwfn + * @param p_ptt + * @param int_mode + * + * @return int + */ +int qed_int_igu_enable(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, + enum qed_int_mode int_mode); + +/** + * @brief - Initialize CAU status block entry + * + * @param p_hwfn + * @param p_sb_entry + * @param pf_id + * @param vf_number + * @param vf_valid + */ +void qed_init_cau_sb_entry(struct qed_hwfn *p_hwfn, + struct cau_sb_entry *p_sb_entry, + u8 pf_id, + u16 vf_number, + u8 vf_valid); + +#define QED_MAPPING_MEMORY_SIZE(dev) (NUM_OF_SBS(dev)) + +#endif |