diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h | 1854 |
1 files changed, 1854 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h new file mode 100644 index 000000000..82049bb13 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h @@ -0,0 +1,1854 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 Intel Deutschland GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * Contact Information: + * Intel Linux Wireless <linuxwifi@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 Intel Deutschland GmbH + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __fw_api_h__ +#define __fw_api_h__ + +#include "fw-api-rs.h" +#include "fw-api-rx.h" +#include "fw-api-tx.h" +#include "fw-api-sta.h" +#include "fw-api-mac.h" +#include "fw-api-power.h" +#include "fw-api-d3.h" +#include "fw-api-coex.h" +#include "fw-api-scan.h" +#include "fw-api-stats.h" +#include "fw-api-tof.h" + +/* Tx queue numbers */ +enum { + IWL_MVM_OFFCHANNEL_QUEUE = 8, + IWL_MVM_CMD_QUEUE = 9, +}; + +enum iwl_mvm_tx_fifo { + IWL_MVM_TX_FIFO_BK = 0, + IWL_MVM_TX_FIFO_BE, + IWL_MVM_TX_FIFO_VI, + IWL_MVM_TX_FIFO_VO, + IWL_MVM_TX_FIFO_MCAST = 5, + IWL_MVM_TX_FIFO_CMD = 7, +}; + +#define IWL_MVM_STATION_COUNT 16 + +#define IWL_MVM_TDLS_STA_COUNT 4 + +/* commands */ +enum { + MVM_ALIVE = 0x1, + REPLY_ERROR = 0x2, + ECHO_CMD = 0x3, + + INIT_COMPLETE_NOTIF = 0x4, + + /* PHY context commands */ + PHY_CONTEXT_CMD = 0x8, + DBG_CFG = 0x9, + ANTENNA_COUPLING_NOTIFICATION = 0xa, + + /* UMAC scan commands */ + SCAN_ITERATION_COMPLETE_UMAC = 0xb5, + SCAN_CFG_CMD = 0xc, + SCAN_REQ_UMAC = 0xd, + SCAN_ABORT_UMAC = 0xe, + SCAN_COMPLETE_UMAC = 0xf, + + /* station table */ + ADD_STA_KEY = 0x17, + ADD_STA = 0x18, + REMOVE_STA = 0x19, + + /* paging get item */ + FW_GET_ITEM_CMD = 0x1a, + + /* TX */ + TX_CMD = 0x1c, + TXPATH_FLUSH = 0x1e, + MGMT_MCAST_KEY = 0x1f, + + /* scheduler config */ + SCD_QUEUE_CFG = 0x1d, + + /* global key */ + WEP_KEY = 0x20, + + /* Memory */ + SHARED_MEM_CFG = 0x25, + + /* TDLS */ + TDLS_CHANNEL_SWITCH_CMD = 0x27, + TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa, + TDLS_CONFIG_CMD = 0xa7, + + /* MAC and Binding commands */ + MAC_CONTEXT_CMD = 0x28, + TIME_EVENT_CMD = 0x29, /* both CMD and response */ + TIME_EVENT_NOTIFICATION = 0x2a, + BINDING_CONTEXT_CMD = 0x2b, + TIME_QUOTA_CMD = 0x2c, + NON_QOS_TX_COUNTER_CMD = 0x2d, + + LQ_CMD = 0x4e, + + /* paging block to FW cpu2 */ + FW_PAGING_BLOCK_CMD = 0x4f, + + /* Scan offload */ + SCAN_OFFLOAD_REQUEST_CMD = 0x51, + SCAN_OFFLOAD_ABORT_CMD = 0x52, + HOT_SPOT_CMD = 0x53, + SCAN_OFFLOAD_COMPLETE = 0x6D, + SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E, + SCAN_OFFLOAD_CONFIG_CMD = 0x6f, + MATCH_FOUND_NOTIFICATION = 0xd9, + SCAN_ITERATION_COMPLETE = 0xe7, + + /* Phy */ + PHY_CONFIGURATION_CMD = 0x6a, + CALIB_RES_NOTIF_PHY_DB = 0x6b, + /* PHY_DB_CMD = 0x6c, */ + + /* ToF - 802.11mc FTM */ + TOF_CMD = 0x10, + TOF_NOTIFICATION = 0x11, + + /* Power - legacy power table command */ + POWER_TABLE_CMD = 0x77, + PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78, + LTR_CONFIG = 0xee, + + /* Thermal Throttling*/ + REPLY_THERMAL_MNG_BACKOFF = 0x7e, + + /* Set/Get DC2DC frequency tune */ + DC2DC_CONFIG_CMD = 0x83, + + /* NVM */ + NVM_ACCESS_CMD = 0x88, + + SET_CALIB_DEFAULT_CMD = 0x8e, + + BEACON_NOTIFICATION = 0x90, + BEACON_TEMPLATE_CMD = 0x91, + TX_ANT_CONFIGURATION_CMD = 0x98, + STATISTICS_CMD = 0x9c, + STATISTICS_NOTIFICATION = 0x9d, + EOSP_NOTIFICATION = 0x9e, + REDUCE_TX_POWER_CMD = 0x9f, + + /* RF-KILL commands and notifications */ + CARD_STATE_CMD = 0xa0, + CARD_STATE_NOTIFICATION = 0xa1, + + MISSED_BEACONS_NOTIFICATION = 0xa2, + + /* Power - new power table command */ + MAC_PM_POWER_TABLE = 0xa9, + + MFUART_LOAD_NOTIFICATION = 0xb1, + + REPLY_RX_PHY_CMD = 0xc0, + REPLY_RX_MPDU_CMD = 0xc1, + FRAME_RELEASE = 0xc3, + BA_NOTIF = 0xc5, + + /* Location Aware Regulatory */ + MCC_UPDATE_CMD = 0xc8, + MCC_CHUB_UPDATE_CMD = 0xc9, + + MARKER_CMD = 0xcb, + + /* BT Coex */ + BT_COEX_PRIO_TABLE = 0xcc, + BT_COEX_PROT_ENV = 0xcd, + BT_PROFILE_NOTIFICATION = 0xce, + BT_CONFIG = 0x9b, + BT_COEX_UPDATE_SW_BOOST = 0x5a, + BT_COEX_UPDATE_CORUN_LUT = 0x5b, + BT_COEX_UPDATE_REDUCED_TXP = 0x5c, + BT_COEX_CI = 0x5d, + + REPLY_SF_CFG_CMD = 0xd1, + REPLY_BEACON_FILTERING_CMD = 0xd2, + + /* DTS measurements */ + CMD_DTS_MEASUREMENT_TRIGGER = 0xdc, + DTS_MEASUREMENT_NOTIFICATION = 0xdd, + + REPLY_DEBUG_CMD = 0xf0, + LDBG_CONFIG_CMD = 0xf6, + DEBUG_LOG_MSG = 0xf7, + + BCAST_FILTER_CMD = 0xcf, + MCAST_FILTER_CMD = 0xd0, + + /* D3 commands/notifications */ + D3_CONFIG_CMD = 0xd3, + PROT_OFFLOAD_CONFIG_CMD = 0xd4, + OFFLOADS_QUERY_CMD = 0xd5, + REMOTE_WAKE_CONFIG_CMD = 0xd6, + D0I3_END_CMD = 0xed, + + /* for WoWLAN in particular */ + WOWLAN_PATTERNS = 0xe0, + WOWLAN_CONFIGURATION = 0xe1, + WOWLAN_TSC_RSC_PARAM = 0xe2, + WOWLAN_TKIP_PARAM = 0xe3, + WOWLAN_KEK_KCK_MATERIAL = 0xe4, + WOWLAN_GET_STATUSES = 0xe5, + WOWLAN_TX_POWER_PER_DB = 0xe6, + + /* and for NetDetect */ + SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56, + SCAN_OFFLOAD_HOTSPOTS_CONFIG_CMD = 0x58, + SCAN_OFFLOAD_HOTSPOTS_QUERY_CMD = 0x59, + + REPLY_MAX = 0xff, +}; + +/* Please keep this enum *SORTED* by hex value. + * Needed for binary search, otherwise a warning will be triggered. + */ +enum iwl_phy_ops_subcmd_ids { + CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0, + DTS_MEASUREMENT_NOTIF_WIDE = 0xFF, +}; + +/* command groups */ +enum { + LEGACY_GROUP = 0x0, + LONG_GROUP = 0x1, + PHY_OPS_GROUP = 0x4, +}; + +/** + * struct iwl_cmd_response - generic response struct for most commands + * @status: status of the command asked, changes for each one + */ +struct iwl_cmd_response { + __le32 status; +}; + +/* + * struct iwl_tx_ant_cfg_cmd + * @valid: valid antenna configuration + */ +struct iwl_tx_ant_cfg_cmd { + __le32 valid; +} __packed; + +/* + * Calibration control struct. + * Sent as part of the phy configuration command. + * @flow_trigger: bitmap for which calibrations to perform according to + * flow triggers. + * @event_trigger: bitmap for which calibrations to perform according to + * event triggers. + */ +struct iwl_calib_ctrl { + __le32 flow_trigger; + __le32 event_trigger; +} __packed; + +/* This enum defines the bitmap of various calibrations to enable in both + * init ucode and runtime ucode through CALIBRATION_CFG_CMD. + */ +enum iwl_calib_cfg { + IWL_CALIB_CFG_XTAL_IDX = BIT(0), + IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(1), + IWL_CALIB_CFG_VOLTAGE_READ_IDX = BIT(2), + IWL_CALIB_CFG_PAPD_IDX = BIT(3), + IWL_CALIB_CFG_TX_PWR_IDX = BIT(4), + IWL_CALIB_CFG_DC_IDX = BIT(5), + IWL_CALIB_CFG_BB_FILTER_IDX = BIT(6), + IWL_CALIB_CFG_LO_LEAKAGE_IDX = BIT(7), + IWL_CALIB_CFG_TX_IQ_IDX = BIT(8), + IWL_CALIB_CFG_TX_IQ_SKEW_IDX = BIT(9), + IWL_CALIB_CFG_RX_IQ_IDX = BIT(10), + IWL_CALIB_CFG_RX_IQ_SKEW_IDX = BIT(11), + IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(12), + IWL_CALIB_CFG_CHAIN_NOISE_IDX = BIT(13), + IWL_CALIB_CFG_DISCONNECTED_ANT_IDX = BIT(14), + IWL_CALIB_CFG_ANT_COUPLING_IDX = BIT(15), + IWL_CALIB_CFG_DAC_IDX = BIT(16), + IWL_CALIB_CFG_ABS_IDX = BIT(17), + IWL_CALIB_CFG_AGC_IDX = BIT(18), +}; + +/* + * Phy configuration command. + */ +struct iwl_phy_cfg_cmd { + __le32 phy_cfg; + struct iwl_calib_ctrl calib_control; +} __packed; + +#define PHY_CFG_RADIO_TYPE (BIT(0) | BIT(1)) +#define PHY_CFG_RADIO_STEP (BIT(2) | BIT(3)) +#define PHY_CFG_RADIO_DASH (BIT(4) | BIT(5)) +#define PHY_CFG_PRODUCT_NUMBER (BIT(6) | BIT(7)) +#define PHY_CFG_TX_CHAIN_A BIT(8) +#define PHY_CFG_TX_CHAIN_B BIT(9) +#define PHY_CFG_TX_CHAIN_C BIT(10) +#define PHY_CFG_RX_CHAIN_A BIT(12) +#define PHY_CFG_RX_CHAIN_B BIT(13) +#define PHY_CFG_RX_CHAIN_C BIT(14) + + +/* Target of the NVM_ACCESS_CMD */ +enum { + NVM_ACCESS_TARGET_CACHE = 0, + NVM_ACCESS_TARGET_OTP = 1, + NVM_ACCESS_TARGET_EEPROM = 2, +}; + +/* Section types for NVM_ACCESS_CMD */ +enum { + NVM_SECTION_TYPE_SW = 1, + NVM_SECTION_TYPE_REGULATORY = 3, + NVM_SECTION_TYPE_CALIBRATION = 4, + NVM_SECTION_TYPE_PRODUCTION = 5, + NVM_SECTION_TYPE_MAC_OVERRIDE = 11, + NVM_SECTION_TYPE_PHY_SKU = 12, + NVM_MAX_NUM_SECTIONS = 13, +}; + +/** + * struct iwl_nvm_access_cmd_ver2 - Request the device to send an NVM section + * @op_code: 0 - read, 1 - write + * @target: NVM_ACCESS_TARGET_* + * @type: NVM_SECTION_TYPE_* + * @offset: offset in bytes into the section + * @length: in bytes, to read/write + * @data: if write operation, the data to write. On read its empty + */ +struct iwl_nvm_access_cmd { + u8 op_code; + u8 target; + __le16 type; + __le16 offset; + __le16 length; + u8 data[]; +} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */ + +#define NUM_OF_FW_PAGING_BLOCKS 33 /* 32 for data and 1 block for CSS */ + +/* + * struct iwl_fw_paging_cmd - paging layout + * + * (FW_PAGING_BLOCK_CMD = 0x4f) + * + * Send to FW the paging layout in the driver. + * + * @flags: various flags for the command + * @block_size: the block size in powers of 2 + * @block_num: number of blocks specified in the command. + * @device_phy_addr: virtual addresses from device side +*/ +struct iwl_fw_paging_cmd { + __le32 flags; + __le32 block_size; + __le32 block_num; + __le32 device_phy_addr[NUM_OF_FW_PAGING_BLOCKS]; +} __packed; /* FW_PAGING_BLOCK_CMD_API_S_VER_1 */ + +/* + * Fw items ID's + * + * @IWL_FW_ITEM_ID_PAGING: Address of the pages that the FW will upload + * download + */ +enum iwl_fw_item_id { + IWL_FW_ITEM_ID_PAGING = 3, +}; + +/* + * struct iwl_fw_get_item_cmd - get an item from the fw + */ +struct iwl_fw_get_item_cmd { + __le32 item_id; +} __packed; /* FW_GET_ITEM_CMD_API_S_VER_1 */ + +#define CONT_REC_COMMAND_SIZE 80 +#define ENABLE_CONT_RECORDING 0x15 +#define DISABLE_CONT_RECORDING 0x16 + +/* + * struct iwl_continuous_record_mode - recording mode + */ +struct iwl_continuous_record_mode { + __le16 enable_recording; +} __packed; + +/* + * struct iwl_continuous_record_cmd - enable/disable continuous recording + */ +struct iwl_continuous_record_cmd { + struct iwl_continuous_record_mode record_mode; + u8 pad[CONT_REC_COMMAND_SIZE - + sizeof(struct iwl_continuous_record_mode)]; +} __packed; + +struct iwl_fw_get_item_resp { + __le32 item_id; + __le32 item_byte_cnt; + __le32 item_val; +} __packed; /* FW_GET_ITEM_RSP_S_VER_1 */ + +/** + * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD + * @offset: offset in bytes into the section + * @length: in bytes, either how much was written or read + * @type: NVM_SECTION_TYPE_* + * @status: 0 for success, fail otherwise + * @data: if read operation, the data returned. Empty on write. + */ +struct iwl_nvm_access_resp { + __le16 offset; + __le16 length; + __le16 type; + __le16 status; + u8 data[]; +} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */ + +/* MVM_ALIVE 0x1 */ + +/* alive response is_valid values */ +#define ALIVE_RESP_UCODE_OK BIT(0) +#define ALIVE_RESP_RFKILL BIT(1) + +/* alive response ver_type values */ +enum { + FW_TYPE_HW = 0, + FW_TYPE_PROT = 1, + FW_TYPE_AP = 2, + FW_TYPE_WOWLAN = 3, + FW_TYPE_TIMING = 4, + FW_TYPE_WIPAN = 5 +}; + +/* alive response ver_subtype values */ +enum { + FW_SUBTYPE_FULL_FEATURE = 0, + FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */ + FW_SUBTYPE_REDUCED = 2, + FW_SUBTYPE_ALIVE_ONLY = 3, + FW_SUBTYPE_WOWLAN = 4, + FW_SUBTYPE_AP_SUBTYPE = 5, + FW_SUBTYPE_WIPAN = 6, + FW_SUBTYPE_INITIALIZE = 9 +}; + +#define IWL_ALIVE_STATUS_ERR 0xDEAD +#define IWL_ALIVE_STATUS_OK 0xCAFE + +#define IWL_ALIVE_FLG_RFKILL BIT(0) + +struct mvm_alive_resp_ver1 { + __le16 status; + __le16 flags; + u8 ucode_minor; + u8 ucode_major; + __le16 id; + u8 api_minor; + u8 api_major; + u8 ver_subtype; + u8 ver_type; + u8 mac; + u8 opt; + __le16 reserved2; + __le32 timestamp; + __le32 error_event_table_ptr; /* SRAM address for error log */ + __le32 log_event_table_ptr; /* SRAM address for event log */ + __le32 cpu_register_ptr; + __le32 dbgm_config_ptr; + __le32 alive_counter_ptr; + __le32 scd_base_ptr; /* SRAM address for SCD */ +} __packed; /* ALIVE_RES_API_S_VER_1 */ + +struct mvm_alive_resp_ver2 { + __le16 status; + __le16 flags; + u8 ucode_minor; + u8 ucode_major; + __le16 id; + u8 api_minor; + u8 api_major; + u8 ver_subtype; + u8 ver_type; + u8 mac; + u8 opt; + __le16 reserved2; + __le32 timestamp; + __le32 error_event_table_ptr; /* SRAM address for error log */ + __le32 log_event_table_ptr; /* SRAM address for LMAC event log */ + __le32 cpu_register_ptr; + __le32 dbgm_config_ptr; + __le32 alive_counter_ptr; + __le32 scd_base_ptr; /* SRAM address for SCD */ + __le32 st_fwrd_addr; /* pointer to Store and forward */ + __le32 st_fwrd_size; + u8 umac_minor; /* UMAC version: minor */ + u8 umac_major; /* UMAC version: major */ + __le16 umac_id; /* UMAC version: id */ + __le32 error_info_addr; /* SRAM address for UMAC error log */ + __le32 dbg_print_buff_addr; +} __packed; /* ALIVE_RES_API_S_VER_2 */ + +struct mvm_alive_resp { + __le16 status; + __le16 flags; + __le32 ucode_minor; + __le32 ucode_major; + u8 ver_subtype; + u8 ver_type; + u8 mac; + u8 opt; + __le32 timestamp; + __le32 error_event_table_ptr; /* SRAM address for error log */ + __le32 log_event_table_ptr; /* SRAM address for LMAC event log */ + __le32 cpu_register_ptr; + __le32 dbgm_config_ptr; + __le32 alive_counter_ptr; + __le32 scd_base_ptr; /* SRAM address for SCD */ + __le32 st_fwrd_addr; /* pointer to Store and forward */ + __le32 st_fwrd_size; + __le32 umac_minor; /* UMAC version: minor */ + __le32 umac_major; /* UMAC version: major */ + __le32 error_info_addr; /* SRAM address for UMAC error log */ + __le32 dbg_print_buff_addr; +} __packed; /* ALIVE_RES_API_S_VER_3 */ + +/* Error response/notification */ +enum { + FW_ERR_UNKNOWN_CMD = 0x0, + FW_ERR_INVALID_CMD_PARAM = 0x1, + FW_ERR_SERVICE = 0x2, + FW_ERR_ARC_MEMORY = 0x3, + FW_ERR_ARC_CODE = 0x4, + FW_ERR_WATCH_DOG = 0x5, + FW_ERR_WEP_GRP_KEY_INDX = 0x10, + FW_ERR_WEP_KEY_SIZE = 0x11, + FW_ERR_OBSOLETE_FUNC = 0x12, + FW_ERR_UNEXPECTED = 0xFE, + FW_ERR_FATAL = 0xFF +}; + +/** + * struct iwl_error_resp - FW error indication + * ( REPLY_ERROR = 0x2 ) + * @error_type: one of FW_ERR_* + * @cmd_id: the command ID for which the error occured + * @bad_cmd_seq_num: sequence number of the erroneous command + * @error_service: which service created the error, applicable only if + * error_type = 2, otherwise 0 + * @timestamp: TSF in usecs. + */ +struct iwl_error_resp { + __le32 error_type; + u8 cmd_id; + u8 reserved1; + __le16 bad_cmd_seq_num; + __le32 error_service; + __le64 timestamp; +} __packed; + + +/* Common PHY, MAC and Bindings definitions */ + +#define MAX_MACS_IN_BINDING (3) +#define MAX_BINDINGS (4) +#define AUX_BINDING_INDEX (3) +#define MAX_PHYS (4) + +/* Used to extract ID and color from the context dword */ +#define FW_CTXT_ID_POS (0) +#define FW_CTXT_ID_MSK (0xff << FW_CTXT_ID_POS) +#define FW_CTXT_COLOR_POS (8) +#define FW_CTXT_COLOR_MSK (0xff << FW_CTXT_COLOR_POS) +#define FW_CTXT_INVALID (0xffffffff) + +#define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\ + (_color << FW_CTXT_COLOR_POS)) + +/* Possible actions on PHYs, MACs and Bindings */ +enum { + FW_CTXT_ACTION_STUB = 0, + FW_CTXT_ACTION_ADD, + FW_CTXT_ACTION_MODIFY, + FW_CTXT_ACTION_REMOVE, + FW_CTXT_ACTION_NUM +}; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */ + +/* Time Events */ + +/* Time Event types, according to MAC type */ +enum iwl_time_event_type { + /* BSS Station Events */ + TE_BSS_STA_AGGRESSIVE_ASSOC, + TE_BSS_STA_ASSOC, + TE_BSS_EAP_DHCP_PROT, + TE_BSS_QUIET_PERIOD, + + /* P2P Device Events */ + TE_P2P_DEVICE_DISCOVERABLE, + TE_P2P_DEVICE_LISTEN, + TE_P2P_DEVICE_ACTION_SCAN, + TE_P2P_DEVICE_FULL_SCAN, + + /* P2P Client Events */ + TE_P2P_CLIENT_AGGRESSIVE_ASSOC, + TE_P2P_CLIENT_ASSOC, + TE_P2P_CLIENT_QUIET_PERIOD, + + /* P2P GO Events */ + TE_P2P_GO_ASSOC_PROT, + TE_P2P_GO_REPETITIVE_NOA, + TE_P2P_GO_CT_WINDOW, + + /* WiDi Sync Events */ + TE_WIDI_TX_SYNC, + + /* Channel Switch NoA */ + TE_CHANNEL_SWITCH_PERIOD, + + TE_MAX +}; /* MAC_EVENT_TYPE_API_E_VER_1 */ + + + +/* Time event - defines for command API v1 */ + +/* + * @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed. + * @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only + * the first fragment is scheduled. + * @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only + * the first 2 fragments are scheduled. + * @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any + * number of fragments are valid. + * + * Other than the constant defined above, specifying a fragmentation value 'x' + * means that the event can be fragmented but only the first 'x' will be + * scheduled. + */ +enum { + TE_V1_FRAG_NONE = 0, + TE_V1_FRAG_SINGLE = 1, + TE_V1_FRAG_DUAL = 2, + TE_V1_FRAG_ENDLESS = 0xffffffff +}; + +/* If a Time Event can be fragmented, this is the max number of fragments */ +#define TE_V1_FRAG_MAX_MSK 0x0fffffff +/* Repeat the time event endlessly (until removed) */ +#define TE_V1_REPEAT_ENDLESS 0xffffffff +/* If a Time Event has bounded repetitions, this is the maximal value */ +#define TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff + +/* Time Event dependencies: none, on another TE, or in a specific time */ +enum { + TE_V1_INDEPENDENT = 0, + TE_V1_DEP_OTHER = BIT(0), + TE_V1_DEP_TSF = BIT(1), + TE_V1_EVENT_SOCIOPATHIC = BIT(2), +}; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */ + +/* + * @TE_V1_NOTIF_NONE: no notifications + * @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start + * @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end + * @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use + * @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use. + * @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start + * @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end + * @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use. + * @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use. + * + * Supported Time event notifications configuration. + * A notification (both event and fragment) includes a status indicating weather + * the FW was able to schedule the event or not. For fragment start/end + * notification the status is always success. There is no start/end fragment + * notification for monolithic events. + */ +enum { + TE_V1_NOTIF_NONE = 0, + TE_V1_NOTIF_HOST_EVENT_START = BIT(0), + TE_V1_NOTIF_HOST_EVENT_END = BIT(1), + TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2), + TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3), + TE_V1_NOTIF_HOST_FRAG_START = BIT(4), + TE_V1_NOTIF_HOST_FRAG_END = BIT(5), + TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6), + TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7), +}; /* MAC_EVENT_ACTION_API_E_VER_2 */ + +/* Time event - defines for command API */ + +/* + * @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed. + * @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only + * the first fragment is scheduled. + * @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only + * the first 2 fragments are scheduled. + * @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any + * number of fragments are valid. + * + * Other than the constant defined above, specifying a fragmentation value 'x' + * means that the event can be fragmented but only the first 'x' will be + * scheduled. + */ +enum { + TE_V2_FRAG_NONE = 0, + TE_V2_FRAG_SINGLE = 1, + TE_V2_FRAG_DUAL = 2, + TE_V2_FRAG_MAX = 0xfe, + TE_V2_FRAG_ENDLESS = 0xff +}; + +/* Repeat the time event endlessly (until removed) */ +#define TE_V2_REPEAT_ENDLESS 0xff +/* If a Time Event has bounded repetitions, this is the maximal value */ +#define TE_V2_REPEAT_MAX 0xfe + +#define TE_V2_PLACEMENT_POS 12 +#define TE_V2_ABSENCE_POS 15 + +/* Time event policy values + * A notification (both event and fragment) includes a status indicating weather + * the FW was able to schedule the event or not. For fragment start/end + * notification the status is always success. There is no start/end fragment + * notification for monolithic events. + * + * @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable + * @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start + * @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end + * @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use + * @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use. + * @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start + * @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end + * @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use. + * @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use. + * @TE_V2_DEP_OTHER: depends on another time event + * @TE_V2_DEP_TSF: depends on a specific time + * @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC + * @TE_V2_ABSENCE: are we present or absent during the Time Event. + */ +enum { + TE_V2_DEFAULT_POLICY = 0x0, + + /* notifications (event start/stop, fragment start/stop) */ + TE_V2_NOTIF_HOST_EVENT_START = BIT(0), + TE_V2_NOTIF_HOST_EVENT_END = BIT(1), + TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2), + TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3), + + TE_V2_NOTIF_HOST_FRAG_START = BIT(4), + TE_V2_NOTIF_HOST_FRAG_END = BIT(5), + TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6), + TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7), + T2_V2_START_IMMEDIATELY = BIT(11), + + TE_V2_NOTIF_MSK = 0xff, + + /* placement characteristics */ + TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS), + TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1), + TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2), + + /* are we present or absent during the Time Event. */ + TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS), +}; + +/** + * struct iwl_time_event_cmd_api - configuring Time Events + * with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also + * with version 1. determined by IWL_UCODE_TLV_FLAGS) + * ( TIME_EVENT_CMD = 0x29 ) + * @id_and_color: ID and color of the relevant MAC + * @action: action to perform, one of FW_CTXT_ACTION_* + * @id: this field has two meanings, depending on the action: + * If the action is ADD, then it means the type of event to add. + * For all other actions it is the unique event ID assigned when the + * event was added by the FW. + * @apply_time: When to start the Time Event (in GP2) + * @max_delay: maximum delay to event's start (apply time), in TU + * @depends_on: the unique ID of the event we depend on (if any) + * @interval: interval between repetitions, in TU + * @duration: duration of event in TU + * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS + * @max_frags: maximal number of fragments the Time Event can be divided to + * @policy: defines whether uCode shall notify the host or other uCode modules + * on event and/or fragment start and/or end + * using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF + * TE_EVENT_SOCIOPATHIC + * using TE_ABSENCE and using TE_NOTIF_* + */ +struct iwl_time_event_cmd { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + __le32 id; + /* MAC_TIME_EVENT_DATA_API_S_VER_2 */ + __le32 apply_time; + __le32 max_delay; + __le32 depends_on; + __le32 interval; + __le32 duration; + u8 repeat; + u8 max_frags; + __le16 policy; +} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_2 */ + +/** + * struct iwl_time_event_resp - response structure to iwl_time_event_cmd + * @status: bit 0 indicates success, all others specify errors + * @id: the Time Event type + * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE + * @id_and_color: ID and color of the relevant MAC + */ +struct iwl_time_event_resp { + __le32 status; + __le32 id; + __le32 unique_id; + __le32 id_and_color; +} __packed; /* MAC_TIME_EVENT_RSP_API_S_VER_1 */ + +/** + * struct iwl_time_event_notif - notifications of time event start/stop + * ( TIME_EVENT_NOTIFICATION = 0x2a ) + * @timestamp: action timestamp in GP2 + * @session_id: session's unique id + * @unique_id: unique id of the Time Event itself + * @id_and_color: ID and color of the relevant MAC + * @action: one of TE_NOTIF_START or TE_NOTIF_END + * @status: true if scheduled, false otherwise (not executed) + */ +struct iwl_time_event_notif { + __le32 timestamp; + __le32 session_id; + __le32 unique_id; + __le32 id_and_color; + __le32 action; + __le32 status; +} __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */ + + +/* Bindings and Time Quota */ + +/** + * struct iwl_binding_cmd - configuring bindings + * ( BINDING_CONTEXT_CMD = 0x2b ) + * @id_and_color: ID and color of the relevant Binding + * @action: action to perform, one of FW_CTXT_ACTION_* + * @macs: array of MAC id and colors which belong to the binding + * @phy: PHY id and color which belongs to the binding + */ +struct iwl_binding_cmd { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + /* BINDING_DATA_API_S_VER_1 */ + __le32 macs[MAX_MACS_IN_BINDING]; + __le32 phy; +} __packed; /* BINDING_CMD_API_S_VER_1 */ + +/* The maximal number of fragments in the FW's schedule session */ +#define IWL_MVM_MAX_QUOTA 128 + +/** + * struct iwl_time_quota_data - configuration of time quota per binding + * @id_and_color: ID and color of the relevant Binding + * @quota: absolute time quota in TU. The scheduler will try to divide the + * remainig quota (after Time Events) according to this quota. + * @max_duration: max uninterrupted context duration in TU + */ +struct iwl_time_quota_data { + __le32 id_and_color; + __le32 quota; + __le32 max_duration; +} __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */ + +/** + * struct iwl_time_quota_cmd - configuration of time quota between bindings + * ( TIME_QUOTA_CMD = 0x2c ) + * @quotas: allocations per binding + */ +struct iwl_time_quota_cmd { + struct iwl_time_quota_data quotas[MAX_BINDINGS]; +} __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */ + + +/* PHY context */ + +/* Supported bands */ +#define PHY_BAND_5 (0) +#define PHY_BAND_24 (1) + +/* Supported channel width, vary if there is VHT support */ +#define PHY_VHT_CHANNEL_MODE20 (0x0) +#define PHY_VHT_CHANNEL_MODE40 (0x1) +#define PHY_VHT_CHANNEL_MODE80 (0x2) +#define PHY_VHT_CHANNEL_MODE160 (0x3) + +/* + * Control channel position: + * For legacy set bit means upper channel, otherwise lower. + * For VHT - bit-2 marks if the control is lower/upper relative to center-freq + * bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0. + * center_freq + * | + * 40Mhz |_______|_______| + * 80Mhz |_______|_______|_______|_______| + * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______| + * code 011 010 001 000 | 100 101 110 111 + */ +#define PHY_VHT_CTRL_POS_1_BELOW (0x0) +#define PHY_VHT_CTRL_POS_2_BELOW (0x1) +#define PHY_VHT_CTRL_POS_3_BELOW (0x2) +#define PHY_VHT_CTRL_POS_4_BELOW (0x3) +#define PHY_VHT_CTRL_POS_1_ABOVE (0x4) +#define PHY_VHT_CTRL_POS_2_ABOVE (0x5) +#define PHY_VHT_CTRL_POS_3_ABOVE (0x6) +#define PHY_VHT_CTRL_POS_4_ABOVE (0x7) + +/* + * @band: PHY_BAND_* + * @channel: channel number + * @width: PHY_[VHT|LEGACY]_CHANNEL_* + * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* + */ +struct iwl_fw_channel_info { + u8 band; + u8 channel; + u8 width; + u8 ctrl_pos; +} __packed; + +#define PHY_RX_CHAIN_DRIVER_FORCE_POS (0) +#define PHY_RX_CHAIN_DRIVER_FORCE_MSK \ + (0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS) +#define PHY_RX_CHAIN_VALID_POS (1) +#define PHY_RX_CHAIN_VALID_MSK \ + (0x7 << PHY_RX_CHAIN_VALID_POS) +#define PHY_RX_CHAIN_FORCE_SEL_POS (4) +#define PHY_RX_CHAIN_FORCE_SEL_MSK \ + (0x7 << PHY_RX_CHAIN_FORCE_SEL_POS) +#define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7) +#define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \ + (0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS) +#define PHY_RX_CHAIN_CNT_POS (10) +#define PHY_RX_CHAIN_CNT_MSK \ + (0x3 << PHY_RX_CHAIN_CNT_POS) +#define PHY_RX_CHAIN_MIMO_CNT_POS (12) +#define PHY_RX_CHAIN_MIMO_CNT_MSK \ + (0x3 << PHY_RX_CHAIN_MIMO_CNT_POS) +#define PHY_RX_CHAIN_MIMO_FORCE_POS (14) +#define PHY_RX_CHAIN_MIMO_FORCE_MSK \ + (0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS) + +/* TODO: fix the value, make it depend on firmware at runtime? */ +#define NUM_PHY_CTX 3 + +/* TODO: complete missing documentation */ +/** + * struct iwl_phy_context_cmd - config of the PHY context + * ( PHY_CONTEXT_CMD = 0x8 ) + * @id_and_color: ID and color of the relevant Binding + * @action: action to perform, one of FW_CTXT_ACTION_* + * @apply_time: 0 means immediate apply and context switch. + * other value means apply new params after X usecs + * @tx_param_color: ??? + * @channel_info: + * @txchain_info: ??? + * @rxchain_info: ??? + * @acquisition_data: ??? + * @dsp_cfg_flags: set to 0 + */ +struct iwl_phy_context_cmd { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + /* PHY_CONTEXT_DATA_API_S_VER_1 */ + __le32 apply_time; + __le32 tx_param_color; + struct iwl_fw_channel_info ci; + __le32 txchain_info; + __le32 rxchain_info; + __le32 acquisition_data; + __le32 dsp_cfg_flags; +} __packed; /* PHY_CONTEXT_CMD_API_VER_1 */ + +/* + * Aux ROC command + * + * Command requests the firmware to create a time event for a certain duration + * and remain on the given channel. This is done by using the Aux framework in + * the FW. + * The command was first used for Hot Spot issues - but can be used regardless + * to Hot Spot. + * + * ( HOT_SPOT_CMD 0x53 ) + * + * @id_and_color: ID and color of the MAC + * @action: action to perform, one of FW_CTXT_ACTION_* + * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the + * event_unique_id should be the id of the time event assigned by ucode. + * Otherwise ignore the event_unique_id. + * @sta_id_and_color: station id and color, resumed during "Remain On Channel" + * activity. + * @channel_info: channel info + * @node_addr: Our MAC Address + * @reserved: reserved for alignment + * @apply_time: GP2 value to start (should always be the current GP2 value) + * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max + * time by which start of the event is allowed to be postponed. + * @duration: event duration in TU To calculate event duration: + * timeEventDuration = min(duration, remainingQuota) + */ +struct iwl_hs20_roc_req { + /* COMMON_INDEX_HDR_API_S_VER_1 hdr */ + __le32 id_and_color; + __le32 action; + __le32 event_unique_id; + __le32 sta_id_and_color; + struct iwl_fw_channel_info channel_info; + u8 node_addr[ETH_ALEN]; + __le16 reserved; + __le32 apply_time; + __le32 apply_time_max_delay; + __le32 duration; +} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */ + +/* + * values for AUX ROC result values + */ +enum iwl_mvm_hot_spot { + HOT_SPOT_RSP_STATUS_OK, + HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS, + HOT_SPOT_MAX_NUM_OF_SESSIONS, +}; + +/* + * Aux ROC command response + * + * In response to iwl_hs20_roc_req the FW sends this command to notify the + * driver the uid of the timevent. + * + * ( HOT_SPOT_CMD 0x53 ) + * + * @event_unique_id: Unique ID of time event assigned by ucode + * @status: Return status 0 is success, all the rest used for specific errors + */ +struct iwl_hs20_roc_res { + __le32 event_unique_id; + __le32 status; +} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */ + +/** + * struct iwl_radio_version_notif - information on the radio version + * ( RADIO_VERSION_NOTIFICATION = 0x68 ) + * @radio_flavor: + * @radio_step: + * @radio_dash: + */ +struct iwl_radio_version_notif { + __le32 radio_flavor; + __le32 radio_step; + __le32 radio_dash; +} __packed; /* RADIO_VERSION_NOTOFICATION_S_VER_1 */ + +enum iwl_card_state_flags { + CARD_ENABLED = 0x00, + HW_CARD_DISABLED = 0x01, + SW_CARD_DISABLED = 0x02, + CT_KILL_CARD_DISABLED = 0x04, + HALT_CARD_DISABLED = 0x08, + CARD_DISABLED_MSK = 0x0f, + CARD_IS_RX_ON = 0x10, +}; + +/** + * struct iwl_radio_version_notif - information on the radio version + * ( CARD_STATE_NOTIFICATION = 0xa1 ) + * @flags: %iwl_card_state_flags + */ +struct iwl_card_state_notif { + __le32 flags; +} __packed; /* CARD_STATE_NTFY_API_S_VER_1 */ + +/** + * struct iwl_missed_beacons_notif - information on missed beacons + * ( MISSED_BEACONS_NOTIFICATION = 0xa2 ) + * @mac_id: interface ID + * @consec_missed_beacons_since_last_rx: number of consecutive missed + * beacons since last RX. + * @consec_missed_beacons: number of consecutive missed beacons + * @num_expected_beacons: + * @num_recvd_beacons: + */ +struct iwl_missed_beacons_notif { + __le32 mac_id; + __le32 consec_missed_beacons_since_last_rx; + __le32 consec_missed_beacons; + __le32 num_expected_beacons; + __le32 num_recvd_beacons; +} __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */ + +/** + * struct iwl_mfuart_load_notif - mfuart image version & status + * ( MFUART_LOAD_NOTIFICATION = 0xb1 ) + * @installed_ver: installed image version + * @external_ver: external image version + * @status: MFUART loading status + * @duration: MFUART loading time +*/ +struct iwl_mfuart_load_notif { + __le32 installed_ver; + __le32 external_ver; + __le32 status; + __le32 duration; +} __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/ + +/** + * struct iwl_set_calib_default_cmd - set default value for calibration. + * ( SET_CALIB_DEFAULT_CMD = 0x8e ) + * @calib_index: the calibration to set value for + * @length: of data + * @data: the value to set for the calibration result + */ +struct iwl_set_calib_default_cmd { + __le16 calib_index; + __le16 length; + u8 data[0]; +} __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */ + +#define MAX_PORT_ID_NUM 2 +#define MAX_MCAST_FILTERING_ADDRESSES 256 + +/** + * struct iwl_mcast_filter_cmd - configure multicast filter. + * @filter_own: Set 1 to filter out multicast packets sent by station itself + * @port_id: Multicast MAC addresses array specifier. This is a strange way + * to identify network interface adopted in host-device IF. + * It is used by FW as index in array of addresses. This array has + * MAX_PORT_ID_NUM members. + * @count: Number of MAC addresses in the array + * @pass_all: Set 1 to pass all multicast packets. + * @bssid: current association BSSID. + * @addr_list: Place holder for array of MAC addresses. + * IMPORTANT: add padding if necessary to ensure DWORD alignment. + */ +struct iwl_mcast_filter_cmd { + u8 filter_own; + u8 port_id; + u8 count; + u8 pass_all; + u8 bssid[6]; + u8 reserved[2]; + u8 addr_list[0]; +} __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */ + +#define MAX_BCAST_FILTERS 8 +#define MAX_BCAST_FILTER_ATTRS 2 + +/** + * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet + * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start. + * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e. + * start of ip payload). + */ +enum iwl_mvm_bcast_filter_attr_offset { + BCAST_FILTER_OFFSET_PAYLOAD_START = 0, + BCAST_FILTER_OFFSET_IP_END = 1, +}; + +/** + * struct iwl_fw_bcast_filter_attr - broadcast filter attribute + * @offset_type: &enum iwl_mvm_bcast_filter_attr_offset. + * @offset: starting offset of this pattern. + * @val: value to match - big endian (MSB is the first + * byte to match from offset pos). + * @mask: mask to match (big endian). + */ +struct iwl_fw_bcast_filter_attr { + u8 offset_type; + u8 offset; + __le16 reserved1; + __be32 val; + __be32 mask; +} __packed; /* BCAST_FILTER_ATT_S_VER_1 */ + +/** + * enum iwl_mvm_bcast_filter_frame_type - filter frame type + * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames. + * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames + */ +enum iwl_mvm_bcast_filter_frame_type { + BCAST_FILTER_FRAME_TYPE_ALL = 0, + BCAST_FILTER_FRAME_TYPE_IPV4 = 1, +}; + +/** + * struct iwl_fw_bcast_filter - broadcast filter + * @discard: discard frame (1) or let it pass (0). + * @frame_type: &enum iwl_mvm_bcast_filter_frame_type. + * @num_attrs: number of valid attributes in this filter. + * @attrs: attributes of this filter. a filter is considered matched + * only when all its attributes are matched (i.e. AND relationship) + */ +struct iwl_fw_bcast_filter { + u8 discard; + u8 frame_type; + u8 num_attrs; + u8 reserved1; + struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS]; +} __packed; /* BCAST_FILTER_S_VER_1 */ + +/** + * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration. + * @default_discard: default action for this mac (discard (1) / pass (0)). + * @attached_filters: bitmap of relevant filters for this mac. + */ +struct iwl_fw_bcast_mac { + u8 default_discard; + u8 reserved1; + __le16 attached_filters; +} __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */ + +/** + * struct iwl_bcast_filter_cmd - broadcast filtering configuration + * @disable: enable (0) / disable (1) + * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS) + * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER) + * @filters: broadcast filters + * @macs: broadcast filtering configuration per-mac + */ +struct iwl_bcast_filter_cmd { + u8 disable; + u8 max_bcast_filters; + u8 max_macs; + u8 reserved1; + struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS]; + struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER]; +} __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */ + +/* + * enum iwl_mvm_marker_id - maker ids + * + * The ids for different type of markers to insert into the usniffer logs + */ +enum iwl_mvm_marker_id { + MARKER_ID_TX_FRAME_LATENCY = 1, +}; /* MARKER_ID_API_E_VER_1 */ + +/** + * struct iwl_mvm_marker - mark info into the usniffer logs + * + * (MARKER_CMD = 0xcb) + * + * Mark the UTC time stamp into the usniffer logs together with additional + * metadata, so the usniffer output can be parsed. + * In the command response the ucode will return the GP2 time. + * + * @dw_len: The amount of dwords following this byte including this byte. + * @marker_id: A unique marker id (iwl_mvm_marker_id). + * @reserved: reserved. + * @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC + * @metadata: additional meta data that will be written to the unsiffer log + */ +struct iwl_mvm_marker { + u8 dwLen; + u8 markerId; + __le16 reserved; + __le64 timestamp; + __le32 metadata[0]; +} __packed; /* MARKER_API_S_VER_1 */ + +/* + * enum iwl_dc2dc_config_id - flag ids + * + * Ids of dc2dc configuration flags + */ +enum iwl_dc2dc_config_id { + DCDC_LOW_POWER_MODE_MSK_SET = 0x1, /* not used */ + DCDC_FREQ_TUNE_SET = 0x2, +}; /* MARKER_ID_API_E_VER_1 */ + +/** + * struct iwl_dc2dc_config_cmd - configure dc2dc values + * + * (DC2DC_CONFIG_CMD = 0x83) + * + * Set/Get & configure dc2dc values. + * The command always returns the current dc2dc values. + * + * @flags: set/get dc2dc + * @enable_low_power_mode: not used. + * @dc2dc_freq_tune0: frequency divider - digital domain + * @dc2dc_freq_tune1: frequency divider - analog domain + */ +struct iwl_dc2dc_config_cmd { + __le32 flags; + __le32 enable_low_power_mode; /* not used */ + __le32 dc2dc_freq_tune0; + __le32 dc2dc_freq_tune1; +} __packed; /* DC2DC_CONFIG_CMD_API_S_VER_1 */ + +/** + * struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd + * + * Current dc2dc values returned by the FW. + * + * @dc2dc_freq_tune0: frequency divider - digital domain + * @dc2dc_freq_tune1: frequency divider - analog domain + */ +struct iwl_dc2dc_config_resp { + __le32 dc2dc_freq_tune0; + __le32 dc2dc_freq_tune1; +} __packed; /* DC2DC_CONFIG_RESP_API_S_VER_1 */ + +/*********************************** + * Smart Fifo API + ***********************************/ +/* Smart Fifo state */ +enum iwl_sf_state { + SF_LONG_DELAY_ON = 0, /* should never be called by driver */ + SF_FULL_ON, + SF_UNINIT, + SF_INIT_OFF, + SF_HW_NUM_STATES +}; + +/* Smart Fifo possible scenario */ +enum iwl_sf_scenario { + SF_SCENARIO_SINGLE_UNICAST, + SF_SCENARIO_AGG_UNICAST, + SF_SCENARIO_MULTICAST, + SF_SCENARIO_BA_RESP, + SF_SCENARIO_TX_RESP, + SF_NUM_SCENARIO +}; + +#define SF_TRANSIENT_STATES_NUMBER 2 /* SF_LONG_DELAY_ON and SF_FULL_ON */ +#define SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */ + +/* smart FIFO default values */ +#define SF_W_MARK_SISO 6144 +#define SF_W_MARK_MIMO2 8192 +#define SF_W_MARK_MIMO3 6144 +#define SF_W_MARK_LEGACY 4096 +#define SF_W_MARK_SCAN 4096 + +/* SF Scenarios timers for default configuration (aligned to 32 uSec) */ +#define SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ +#define SF_SINGLE_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ +#define SF_AGG_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ +#define SF_AGG_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ +#define SF_MCAST_IDLE_TIMER_DEF 160 /* 150 mSec */ +#define SF_MCAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ +#define SF_BA_IDLE_TIMER_DEF 160 /* 150 uSec */ +#define SF_BA_AGING_TIMER_DEF 400 /* 0.4 mSec */ +#define SF_TX_RE_IDLE_TIMER_DEF 160 /* 150 uSec */ +#define SF_TX_RE_AGING_TIMER_DEF 400 /* 0.4 mSec */ + +/* SF Scenarios timers for BSS MAC configuration (aligned to 32 uSec) */ +#define SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */ +#define SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */ +#define SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */ +#define SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */ +#define SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */ +#define SF_MCAST_AGING_TIMER 10016 /* 10 mSec */ +#define SF_BA_IDLE_TIMER 320 /* 300 uSec */ +#define SF_BA_AGING_TIMER 2016 /* 2 mSec */ +#define SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */ +#define SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */ + +#define SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */ + +#define SF_CFG_DUMMY_NOTIF_OFF BIT(16) + +/** + * Smart Fifo configuration command. + * @state: smart fifo state, types listed in enum %iwl_sf_sate. + * @watermark: Minimum allowed availabe free space in RXF for transient state. + * @long_delay_timeouts: aging and idle timer values for each scenario + * in long delay state. + * @full_on_timeouts: timer values for each scenario in full on state. + */ +struct iwl_sf_cfg_cmd { + __le32 state; + __le32 watermark[SF_TRANSIENT_STATES_NUMBER]; + __le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; + __le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; +} __packed; /* SF_CFG_API_S_VER_2 */ + +/*********************************** + * Location Aware Regulatory (LAR) API - MCC updates + ***********************************/ + +/** + * struct iwl_mcc_update_cmd_v1 - Request the device to update geographic + * regulatory profile according to the given MCC (Mobile Country Code). + * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. + * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the + * MCC in the cmd response will be the relevant MCC in the NVM. + * @mcc: given mobile country code + * @source_id: the source from where we got the MCC, see iwl_mcc_source + * @reserved: reserved for alignment + */ +struct iwl_mcc_update_cmd_v1 { + __le16 mcc; + u8 source_id; + u8 reserved; +} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */ + +/** + * struct iwl_mcc_update_cmd - Request the device to update geographic + * regulatory profile according to the given MCC (Mobile Country Code). + * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. + * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the + * MCC in the cmd response will be the relevant MCC in the NVM. + * @mcc: given mobile country code + * @source_id: the source from where we got the MCC, see iwl_mcc_source + * @reserved: reserved for alignment + * @key: integrity key for MCC API OEM testing + * @reserved2: reserved + */ +struct iwl_mcc_update_cmd { + __le16 mcc; + u8 source_id; + u8 reserved; + __le32 key; + __le32 reserved2[5]; +} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */ + +/** + * iwl_mcc_update_resp_v1 - response to MCC_UPDATE_CMD. + * Contains the new channel control profile map, if changed, and the new MCC + * (mobile country code). + * The new MCC may be different than what was requested in MCC_UPDATE_CMD. + * @status: see &enum iwl_mcc_update_status + * @mcc: the new applied MCC + * @cap: capabilities for all channels which matches the MCC + * @source_id: the MCC source, see iwl_mcc_source + * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 + * channels, depending on platform) + * @channels: channel control data map, DWORD for each channel. Only the first + * 16bits are used. + */ +struct iwl_mcc_update_resp_v1 { + __le32 status; + __le16 mcc; + u8 cap; + u8 source_id; + __le32 n_channels; + __le32 channels[0]; +} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */ + +/** + * iwl_mcc_update_resp - response to MCC_UPDATE_CMD. + * Contains the new channel control profile map, if changed, and the new MCC + * (mobile country code). + * The new MCC may be different than what was requested in MCC_UPDATE_CMD. + * @status: see &enum iwl_mcc_update_status + * @mcc: the new applied MCC + * @cap: capabilities for all channels which matches the MCC + * @source_id: the MCC source, see iwl_mcc_source + * @time: time elapsed from the MCC test start (in 30 seconds TU) + * @reserved: reserved. + * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 + * channels, depending on platform) + * @channels: channel control data map, DWORD for each channel. Only the first + * 16bits are used. + */ +struct iwl_mcc_update_resp { + __le32 status; + __le16 mcc; + u8 cap; + u8 source_id; + __le16 time; + __le16 reserved; + __le32 n_channels; + __le32 channels[0]; +} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */ + +/** + * struct iwl_mcc_chub_notif - chub notifies of mcc change + * (MCC_CHUB_UPDATE_CMD = 0xc9) + * The Chub (Communication Hub, CommsHUB) is a HW component that connects to + * the cellular and connectivity cores that gets updates of the mcc, and + * notifies the ucode directly of any mcc change. + * The ucode requests the driver to request the device to update geographic + * regulatory profile according to the given MCC (Mobile Country Code). + * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. + * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the + * MCC in the cmd response will be the relevant MCC in the NVM. + * @mcc: given mobile country code + * @source_id: identity of the change originator, see iwl_mcc_source + * @reserved1: reserved for alignment + */ +struct iwl_mcc_chub_notif { + u16 mcc; + u8 source_id; + u8 reserved1; +} __packed; /* LAR_MCC_NOTIFY_S */ + +enum iwl_mcc_update_status { + MCC_RESP_NEW_CHAN_PROFILE, + MCC_RESP_SAME_CHAN_PROFILE, + MCC_RESP_INVALID, + MCC_RESP_NVM_DISABLED, + MCC_RESP_ILLEGAL, + MCC_RESP_LOW_PRIORITY, + MCC_RESP_TEST_MODE_ACTIVE, + MCC_RESP_TEST_MODE_NOT_ACTIVE, + MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE, +}; + +enum iwl_mcc_source { + MCC_SOURCE_OLD_FW = 0, + MCC_SOURCE_ME = 1, + MCC_SOURCE_BIOS = 2, + MCC_SOURCE_3G_LTE_HOST = 3, + MCC_SOURCE_3G_LTE_DEVICE = 4, + MCC_SOURCE_WIFI = 5, + MCC_SOURCE_RESERVED = 6, + MCC_SOURCE_DEFAULT = 7, + MCC_SOURCE_UNINITIALIZED = 8, + MCC_SOURCE_MCC_API = 9, + MCC_SOURCE_GET_CURRENT = 0x10, + MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11, +}; + +/* DTS measurements */ + +enum iwl_dts_measurement_flags { + DTS_TRIGGER_CMD_FLAGS_TEMP = BIT(0), + DTS_TRIGGER_CMD_FLAGS_VOLT = BIT(1), +}; + +/** + * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements + * + * @flags: indicates which measurements we want as specified in &enum + * iwl_dts_measurement_flags + */ +struct iwl_dts_measurement_cmd { + __le32 flags; +} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */ + +/** +* enum iwl_dts_control_measurement_mode - DTS measurement type +* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read +* back (latest value. Not waiting for new value). Use automatic +* SW DTS configuration. +* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings, +* trigger DTS reading and provide read back temperature read +* when available. +* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read +* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result, +* without measurement trigger. +*/ +enum iwl_dts_control_measurement_mode { + DTS_AUTOMATIC = 0, + DTS_REQUEST_READ = 1, + DTS_OVER_WRITE = 2, + DTS_DIRECT_WITHOUT_MEASURE = 3, +}; + +/** +* enum iwl_dts_used - DTS to use or used for measurement in the DTS request +* @DTS_USE_TOP: Top +* @DTS_USE_CHAIN_A: chain A +* @DTS_USE_CHAIN_B: chain B +* @DTS_USE_CHAIN_C: chain C +* @XTAL_TEMPERATURE - read temperature from xtal +*/ +enum iwl_dts_used { + DTS_USE_TOP = 0, + DTS_USE_CHAIN_A = 1, + DTS_USE_CHAIN_B = 2, + DTS_USE_CHAIN_C = 3, + XTAL_TEMPERATURE = 4, +}; + +/** +* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode +* @DTS_BIT6_MODE: bit 6 mode +* @DTS_BIT8_MODE: bit 8 mode +*/ +enum iwl_dts_bit_mode { + DTS_BIT6_MODE = 0, + DTS_BIT8_MODE = 1, +}; + +/** + * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements + * @control_mode: see &enum iwl_dts_control_measurement_mode + * @temperature: used when over write DTS mode is selected + * @sensor: set temperature sensor to use. See &enum iwl_dts_used + * @avg_factor: average factor to DTS in request DTS read mode + * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode + * @step_duration: step duration for the DTS + */ +struct iwl_ext_dts_measurement_cmd { + __le32 control_mode; + __le32 temperature; + __le32 sensor; + __le32 avg_factor; + __le32 bit_mode; + __le32 step_duration; +} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */ + +/** + * iwl_dts_measurement_notif - notification received with the measurements + * + * @temp: the measured temperature + * @voltage: the measured voltage + */ +struct iwl_dts_measurement_notif { + __le32 temp; + __le32 voltage; +} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S */ + +/*********************************** + * TDLS API + ***********************************/ + +/* Type of TDLS request */ +enum iwl_tdls_channel_switch_type { + TDLS_SEND_CHAN_SW_REQ = 0, + TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH, + TDLS_MOVE_CH, +}; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */ + +/** + * Switch timing sub-element in a TDLS channel-switch command + * @frame_timestamp: GP2 timestamp of channel-switch request/response packet + * received from peer + * @max_offchan_duration: What amount of microseconds out of a DTIM is given + * to the TDLS off-channel communication. For instance if the DTIM is + * 200TU and the TDLS peer is to be given 25% of the time, the value + * given will be 50TU, or 50 * 1024 if translated into microseconds. + * @switch_time: switch time the peer sent in its channel switch timing IE + * @switch_timout: switch timeout the peer sent in its channel switch timing IE + */ +struct iwl_tdls_channel_switch_timing { + __le32 frame_timestamp; /* GP2 time of peer packet Rx */ + __le32 max_offchan_duration; /* given in micro-seconds */ + __le32 switch_time; /* given in micro-seconds */ + __le32 switch_timeout; /* given in micro-seconds */ +} __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */ + +#define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200 + +/** + * TDLS channel switch frame template + * + * A template representing a TDLS channel-switch request or response frame + * + * @switch_time_offset: offset to the channel switch timing IE in the template + * @tx_cmd: Tx parameters for the frame + * @data: frame data + */ +struct iwl_tdls_channel_switch_frame { + __le32 switch_time_offset; + struct iwl_tx_cmd tx_cmd; + u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE]; +} __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */ + +/** + * TDLS channel switch command + * + * The command is sent to initiate a channel switch and also in response to + * incoming TDLS channel-switch request/response packets from remote peers. + * + * @switch_type: see &enum iwl_tdls_channel_switch_type + * @peer_sta_id: station id of TDLS peer + * @ci: channel we switch to + * @timing: timing related data for command + * @frame: channel-switch request/response template, depending to switch_type + */ +struct iwl_tdls_channel_switch_cmd { + u8 switch_type; + __le32 peer_sta_id; + struct iwl_fw_channel_info ci; + struct iwl_tdls_channel_switch_timing timing; + struct iwl_tdls_channel_switch_frame frame; +} __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */ + +/** + * TDLS channel switch start notification + * + * @status: non-zero on success + * @offchannel_duration: duration given in microseconds + * @sta_id: peer currently performing the channel-switch with + */ +struct iwl_tdls_channel_switch_notif { + __le32 status; + __le32 offchannel_duration; + __le32 sta_id; +} __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */ + +/** + * TDLS station info + * + * @sta_id: station id of the TDLS peer + * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx + * @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer + * @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise + */ +struct iwl_tdls_sta_info { + u8 sta_id; + u8 tx_to_peer_tid; + __le16 tx_to_peer_ssn; + __le32 is_initiator; +} __packed; /* TDLS_STA_INFO_VER_1 */ + +/** + * TDLS basic config command + * + * @id_and_color: MAC id and color being configured + * @tdls_peer_count: amount of currently connected TDLS peers + * @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx + * @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP + * @sta_info: per-station info. Only the first tdls_peer_count entries are set + * @pti_req_data_offset: offset of network-level data for the PTI template + * @pti_req_tx_cmd: Tx parameters for PTI request template + * @pti_req_template: PTI request template data + */ +struct iwl_tdls_config_cmd { + __le32 id_and_color; /* mac id and color */ + u8 tdls_peer_count; + u8 tx_to_ap_tid; + __le16 tx_to_ap_ssn; + struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT]; + + __le32 pti_req_data_offset; + struct iwl_tx_cmd pti_req_tx_cmd; + u8 pti_req_template[0]; +} __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */ + +/** + * TDLS per-station config information from FW + * + * @sta_id: station id of the TDLS peer + * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to + * the peer + */ +struct iwl_tdls_config_sta_info_res { + __le16 sta_id; + __le16 tx_to_peer_last_seq; +} __packed; /* TDLS_STA_INFO_RSP_VER_1 */ + +/** + * TDLS config information from FW + * + * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP + * @sta_info: per-station TDLS config information + */ +struct iwl_tdls_config_res { + __le32 tx_to_ap_last_seq; + struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT]; +} __packed; /* TDLS_CONFIG_RSP_API_S_VER_1 */ + +#define TX_FIFO_MAX_NUM 8 +#define RX_FIFO_MAX_NUM 2 + +/** + * Shared memory configuration information from the FW + * + * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not + * accessible) + * @shared_mem_size: shared memory size + * @sample_buff_addr: internal sample (mon/adc) buff addr (pre 8000 HW set to + * 0x0 as accessible only via DBGM RDAT) + * @sample_buff_size: internal sample buff size + * @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB), (pre + * 8000 HW set to 0x0 as not accessible) + * @txfifo_size: size of TXF0 ... TXF7 + * @rxfifo_size: RXF1, RXF2 sizes. If there is no RXF2, it'll have a value of 0 + * @page_buff_addr: used by UMAC and performance debug (page miss analysis), + * when paging is not supported this should be 0 + * @page_buff_size: size of %page_buff_addr + */ +struct iwl_shared_mem_cfg { + __le32 shared_mem_addr; + __le32 shared_mem_size; + __le32 sample_buff_addr; + __le32 sample_buff_size; + __le32 txfifo_addr; + __le32 txfifo_size[TX_FIFO_MAX_NUM]; + __le32 rxfifo_size[RX_FIFO_MAX_NUM]; + __le32 page_buff_addr; + __le32 page_buff_size; +} __packed; /* SHARED_MEM_ALLOC_API_S_VER_1 */ + +#endif /* __fw_api_h__ */ |