summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/orinoco/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/orinoco/main.c')
-rw-r--r--drivers/net/wireless/orinoco/main.c2429
1 files changed, 0 insertions, 2429 deletions
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
deleted file mode 100644
index 7b5c55432..000000000
--- a/drivers/net/wireless/orinoco/main.c
+++ /dev/null
@@ -1,2429 +0,0 @@
-/* main.c - (formerly known as dldwd_cs.c, orinoco_cs.c and orinoco.c)
- *
- * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
- * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
- *
- * Current maintainers (as of 29 September 2003) are:
- * Pavel Roskin <proski AT gnu.org>
- * and David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * (C) Copyright David Gibson, IBM Corporation 2001-2003.
- * Copyright (C) 2000 David Gibson, Linuxcare Australia.
- * With some help from :
- * Copyright (C) 2001 Jean Tourrilhes, HP Labs
- * Copyright (C) 2001 Benjamin Herrenschmidt
- *
- * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
- *
- * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
- * AT fasta.fh-dortmund.de>
- * http://www.stud.fh-dortmund.de/~andy/wvlan/
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds AT users.sourceforge.net>. Portions created by David
- * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
- * Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL. */
-
-/*
- * TODO
- * o Handle de-encapsulation within network layer, provide 802.11
- * headers (patch from Thomas 'Dent' Mirlacher)
- * o Fix possible races in SPY handling.
- * o Disconnect wireless extensions from fundamental configuration.
- * o (maybe) Software WEP support (patch from Stano Meduna).
- * o (maybe) Use multiple Tx buffers - driver handling queue
- * rather than firmware.
- */
-
-/* Locking and synchronization:
- *
- * The basic principle is that everything is serialized through a
- * single spinlock, priv->lock. The lock is used in user, bh and irq
- * context, so when taken outside hardirq context it should always be
- * taken with interrupts disabled. The lock protects both the
- * hardware and the struct orinoco_private.
- *
- * Another flag, priv->hw_unavailable indicates that the hardware is
- * unavailable for an extended period of time (e.g. suspended, or in
- * the middle of a hard reset). This flag is protected by the
- * spinlock. All code which touches the hardware should check the
- * flag after taking the lock, and if it is set, give up on whatever
- * they are doing and drop the lock again. The orinoco_lock()
- * function handles this (it unlocks and returns -EBUSY if
- * hw_unavailable is non-zero).
- */
-
-#define DRIVER_NAME "orinoco"
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/suspend.h>
-#include <linux/if_arp.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <net/iw_handler.h>
-#include <net/cfg80211.h>
-
-#include "hermes_rid.h"
-#include "hermes_dld.h"
-#include "hw.h"
-#include "scan.h"
-#include "mic.h"
-#include "fw.h"
-#include "wext.h"
-#include "cfg.h"
-#include "main.h"
-
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module information */
-/********************************************************************/
-
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & "
- "David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based "
- "and similar wireless cards");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Level of debugging. Used in the macros in orinoco.h */
-#ifdef ORINOCO_DEBUG
-int orinoco_debug = ORINOCO_DEBUG;
-EXPORT_SYMBOL(orinoco_debug);
-module_param(orinoco_debug, int, 0644);
-MODULE_PARM_DESC(orinoco_debug, "Debug level");
-#endif
-
-static bool suppress_linkstatus; /* = 0 */
-module_param(suppress_linkstatus, bool, 0644);
-MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
-
-static int ignore_disconnect; /* = 0 */
-module_param(ignore_disconnect, int, 0644);
-MODULE_PARM_DESC(ignore_disconnect,
- "Don't report lost link to the network layer");
-
-int force_monitor; /* = 0 */
-module_param(force_monitor, int, 0644);
-MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions");
-
-/********************************************************************/
-/* Internal constants */
-/********************************************************************/
-
-/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
-static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
-
-#define ORINOCO_MIN_MTU 256
-#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD)
-
-#define MAX_IRQLOOPS_PER_IRQ 10
-#define MAX_IRQLOOPS_PER_JIFFY (20000 / HZ) /* Based on a guestimate of
- * how many events the
- * device could
- * legitimately generate */
-
-#define DUMMY_FID 0xFFFF
-
-/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
- HERMES_MAX_MULTICAST : 0)*/
-#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
-
-#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
- | HERMES_EV_TX | HERMES_EV_TXEXC \
- | HERMES_EV_WTERR | HERMES_EV_INFO \
- | HERMES_EV_INFDROP)
-
-/********************************************************************/
-/* Data types */
-/********************************************************************/
-
-/* Beginning of the Tx descriptor, used in TxExc handling */
-struct hermes_txexc_data {
- struct hermes_tx_descriptor desc;
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
-} __packed;
-
-/* Rx frame header except compatibility 802.3 header */
-struct hermes_rx_descriptor {
- /* Control */
- __le16 status;
- __le32 time;
- u8 silence;
- u8 signal;
- u8 rate;
- u8 rxflow;
- __le32 reserved;
-
- /* 802.11 header */
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- u8 addr4[ETH_ALEN];
-
- /* Data length */
- __le16 data_len;
-} __packed;
-
-struct orinoco_rx_data {
- struct hermes_rx_descriptor *desc;
- struct sk_buff *skb;
- struct list_head list;
-};
-
-struct orinoco_scan_data {
- void *buf;
- size_t len;
- int type;
- struct list_head list;
-};
-
-/********************************************************************/
-/* Function prototypes */
-/********************************************************************/
-
-static int __orinoco_set_multicast_list(struct net_device *dev);
-static int __orinoco_up(struct orinoco_private *priv);
-static int __orinoco_down(struct orinoco_private *priv);
-static int __orinoco_commit(struct orinoco_private *priv);
-
-/********************************************************************/
-/* Internal helper functions */
-/********************************************************************/
-
-void set_port_type(struct orinoco_private *priv)
-{
- switch (priv->iw_mode) {
- case NL80211_IFTYPE_STATION:
- priv->port_type = 1;
- priv->createibss = 0;
- break;
- case NL80211_IFTYPE_ADHOC:
- if (priv->prefer_port3) {
- priv->port_type = 3;
- priv->createibss = 0;
- } else {
- priv->port_type = priv->ibss_port;
- priv->createibss = 1;
- }
- break;
- case NL80211_IFTYPE_MONITOR:
- priv->port_type = 3;
- priv->createibss = 0;
- break;
- default:
- printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
- priv->ndev->name);
- }
-}
-
-/********************************************************************/
-/* Device methods */
-/********************************************************************/
-
-int orinoco_open(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- unsigned long flags;
- int err;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = __orinoco_up(priv);
-
- if (!err)
- priv->open = 1;
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-EXPORT_SYMBOL(orinoco_open);
-
-int orinoco_stop(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int err = 0;
-
- /* We mustn't use orinoco_lock() here, because we need to be
- able to close the interface even if hw_unavailable is set
- (e.g. as we're released after a PC Card removal) */
- orinoco_lock_irq(priv);
-
- priv->open = 0;
-
- err = __orinoco_down(priv);
-
- orinoco_unlock_irq(priv);
-
- return err;
-}
-EXPORT_SYMBOL(orinoco_stop);
-
-struct net_device_stats *orinoco_get_stats(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
-
- return &priv->stats;
-}
-EXPORT_SYMBOL(orinoco_get_stats);
-
-void orinoco_set_multicast_list(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0) {
- printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
- "called when hw_unavailable\n", dev->name);
- return;
- }
-
- __orinoco_set_multicast_list(dev);
- orinoco_unlock(priv, &flags);
-}
-EXPORT_SYMBOL(orinoco_set_multicast_list);
-
-int orinoco_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct orinoco_private *priv = ndev_priv(dev);
-
- if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU))
- return -EINVAL;
-
- /* MTU + encapsulation + header length */
- if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
- (priv->nicbuf_size - ETH_HLEN))
- return -EINVAL;
-
- dev->mtu = new_mtu;
-
- return 0;
-}
-EXPORT_SYMBOL(orinoco_change_mtu);
-
-/********************************************************************/
-/* Tx path */
-/********************************************************************/
-
-/* Add encapsulation and MIC to the existing SKB.
- * The main xmit routine will then send the whole lot to the card.
- * Need 8 bytes headroom
- * Need 8 bytes tailroom
- *
- * With encapsulated ethernet II frame
- * --------
- * 803.3 header (14 bytes)
- * dst[6]
- * -------- src[6]
- * 803.3 header (14 bytes) len[2]
- * dst[6] 803.2 header (8 bytes)
- * src[6] encaps[6]
- * len[2] <- leave alone -> len[2]
- * -------- -------- <-- 0
- * Payload Payload
- * ... ...
- *
- * -------- --------
- * MIC (8 bytes)
- * --------
- *
- * returns 0 on success, -ENOMEM on error.
- */
-int orinoco_process_xmit_skb(struct sk_buff *skb,
- struct net_device *dev,
- struct orinoco_private *priv,
- int *tx_control,
- u8 *mic_buf)
-{
- struct orinoco_tkip_key *key;
- struct ethhdr *eh;
- int do_mic;
-
- key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
-
- do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
- (key != NULL));
-
- if (do_mic)
- *tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
- HERMES_TXCTRL_MIC;
-
- eh = (struct ethhdr *)skb->data;
-
- /* Encapsulate Ethernet-II frames */
- if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
- struct header_struct {
- struct ethhdr eth; /* 802.3 header */
- u8 encap[6]; /* 802.2 header */
- } __packed hdr;
- int len = skb->len + sizeof(encaps_hdr) - (2 * ETH_ALEN);
-
- if (skb_headroom(skb) < ENCAPS_OVERHEAD) {
- if (net_ratelimit())
- printk(KERN_ERR
- "%s: Not enough headroom for 802.2 headers %d\n",
- dev->name, skb_headroom(skb));
- return -ENOMEM;
- }
-
- /* Fill in new header */
- memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
- hdr.eth.h_proto = htons(len);
- memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
-
- /* Make room for the new header, and copy it in */
- eh = (struct ethhdr *) skb_push(skb, ENCAPS_OVERHEAD);
- memcpy(eh, &hdr, sizeof(hdr));
- }
-
- /* Calculate Michael MIC */
- if (do_mic) {
- size_t len = skb->len - ETH_HLEN;
- u8 *mic = &mic_buf[0];
-
- /* Have to write to an even address, so copy the spare
- * byte across */
- if (skb->len % 2) {
- *mic = skb->data[skb->len - 1];
- mic++;
- }
-
- orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
- eh->h_dest, eh->h_source, 0 /* priority */,
- skb->data + ETH_HLEN,
- len, mic);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(orinoco_process_xmit_skb);
-
-static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- struct hermes *hw = &priv->hw;
- int err = 0;
- u16 txfid = priv->txfid;
- int tx_control;
- unsigned long flags;
- u8 mic_buf[MICHAEL_MIC_LEN + 1];
-
- if (!netif_running(dev)) {
- printk(KERN_ERR "%s: Tx on stopped device!\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (netif_queue_stopped(dev)) {
- printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (orinoco_lock(priv, &flags) != 0) {
- printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (!netif_carrier_ok(dev) ||
- (priv->iw_mode == NL80211_IFTYPE_MONITOR)) {
- /* Oops, the firmware hasn't established a connection,
- silently drop the packet (this seems to be the
- safest approach). */
- goto drop;
- }
-
- /* Check packet length */
- if (skb->len < ETH_HLEN)
- goto drop;
-
- tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
-
- err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
- &mic_buf[0]);
- if (err)
- goto drop;
-
- if (priv->has_alt_txcntl) {
- /* WPA enabled firmwares have tx_cntl at the end of
- * the 802.11 header. So write zeroed descriptor and
- * 802.11 header at the same time
- */
- char desc[HERMES_802_3_OFFSET];
- __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET];
-
- memset(&desc, 0, sizeof(desc));
-
- *txcntl = cpu_to_le16(tx_control);
- err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
- txfid, 0);
- if (err) {
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d writing Tx "
- "descriptor to BAP\n", dev->name, err);
- goto busy;
- }
- } else {
- struct hermes_tx_descriptor desc;
-
- memset(&desc, 0, sizeof(desc));
-
- desc.tx_control = cpu_to_le16(tx_control);
- err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
- txfid, 0);
- if (err) {
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d writing Tx "
- "descriptor to BAP\n", dev->name, err);
- goto busy;
- }
-
- /* Clear the 802.11 header and data length fields - some
- * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
- * if this isn't done. */
- hermes_clear_words(hw, HERMES_DATA0,
- HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
- }
-
- err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len,
- txfid, HERMES_802_3_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
- dev->name, err);
- goto busy;
- }
-
- if (tx_control & HERMES_TXCTRL_MIC) {
- size_t offset = HERMES_802_3_OFFSET + skb->len;
- size_t len = MICHAEL_MIC_LEN;
-
- if (offset % 2) {
- offset--;
- len++;
- }
- err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
- txfid, offset);
- if (err) {
- printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
- dev->name, err);
- goto busy;
- }
- }
-
- /* Finally, we actually initiate the send */
- netif_stop_queue(dev);
-
- err = hw->ops->cmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
- txfid, NULL);
- if (err) {
- netif_start_queue(dev);
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d transmitting packet\n",
- dev->name, err);
- goto busy;
- }
-
- stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
- goto ok;
-
- drop:
- stats->tx_errors++;
- stats->tx_dropped++;
-
- ok:
- orinoco_unlock(priv, &flags);
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
-
- busy:
- if (err == -EIO)
- schedule_work(&priv->reset_work);
- orinoco_unlock(priv, &flags);
- return NETDEV_TX_BUSY;
-}
-
-static void __orinoco_ev_alloc(struct net_device *dev, struct hermes *hw)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- u16 fid = hermes_read_regn(hw, ALLOCFID);
-
- if (fid != priv->txfid) {
- if (fid != DUMMY_FID)
- printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
- dev->name, fid);
- return;
- }
-
- hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
-}
-
-static void __orinoco_ev_tx(struct net_device *dev, struct hermes *hw)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
-
- stats->tx_packets++;
-
- netif_wake_queue(dev);
-
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
-}
-
-static void __orinoco_ev_txexc(struct net_device *dev, struct hermes *hw)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- u16 fid = hermes_read_regn(hw, TXCOMPLFID);
- u16 status;
- struct hermes_txexc_data hdr;
- int err = 0;
-
- if (fid == DUMMY_FID)
- return; /* Nothing's really happened */
-
- /* Read part of the frame header - we need status and addr1 */
- err = hw->ops->bap_pread(hw, IRQ_BAP, &hdr,
- sizeof(struct hermes_txexc_data),
- fid, 0);
-
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
- stats->tx_errors++;
-
- if (err) {
- printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
- "(FID=%04X error %d)\n",
- dev->name, fid, err);
- return;
- }
-
- DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name,
- err, fid);
-
- /* We produce a TXDROP event only for retry or lifetime
- * exceeded, because that's the only status that really mean
- * that this particular node went away.
- * Other errors means that *we* screwed up. - Jean II */
- status = le16_to_cpu(hdr.desc.status);
- if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
- union iwreq_data wrqu;
-
- /* Copy 802.11 dest address.
- * We use the 802.11 header because the frame may
- * not be 802.3 or may be mangled...
- * In Ad-Hoc mode, it will be the node address.
- * In managed mode, it will be most likely the AP addr
- * User space will figure out how to convert it to
- * whatever it needs (IP address or else).
- * - Jean II */
- memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN);
- wrqu.addr.sa_family = ARPHRD_ETHER;
-
- /* Send event to user space */
- wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
- }
-
- netif_wake_queue(dev);
-}
-
-void orinoco_tx_timeout(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- struct hermes *hw = &priv->hw;
-
- printk(KERN_WARNING "%s: Tx timeout! "
- "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
- dev->name, hermes_read_regn(hw, ALLOCFID),
- hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
-
- stats->tx_errors++;
-
- schedule_work(&priv->reset_work);
-}
-EXPORT_SYMBOL(orinoco_tx_timeout);
-
-/********************************************************************/
-/* Rx path (data frames) */
-/********************************************************************/
-
-/* Does the frame have a SNAP header indicating it should be
- * de-encapsulated to Ethernet-II? */
-static inline int is_ethersnap(void *_hdr)
-{
- u8 *hdr = _hdr;
-
- /* We de-encapsulate all packets which, a) have SNAP headers
- * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
- * and where b) the OUI of the SNAP header is 00:00:00 or
- * 00:00:f8 - we need both because different APs appear to use
- * different OUIs for some reason */
- return (memcmp(hdr, &encaps_hdr, 5) == 0)
- && ((hdr[5] == 0x00) || (hdr[5] == 0xf8));
-}
-
-static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
- int level, int noise)
-{
- struct iw_quality wstats;
- wstats.level = level - 0x95;
- wstats.noise = noise - 0x95;
- wstats.qual = (level > noise) ? (level - noise) : 0;
- wstats.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
- /* Update spy records */
- wireless_spy_update(dev, mac, &wstats);
-}
-
-static void orinoco_stat_gather(struct net_device *dev,
- struct sk_buff *skb,
- struct hermes_rx_descriptor *desc)
-{
- struct orinoco_private *priv = ndev_priv(dev);
-
- /* Using spy support with lots of Rx packets, like in an
- * infrastructure (AP), will really slow down everything, because
- * the MAC address must be compared to each entry of the spy list.
- * If the user really asks for it (set some address in the
- * spy list), we do it, but he will pay the price.
- * Note that to get here, you need both WIRELESS_SPY
- * compiled in AND some addresses in the list !!!
- */
- /* Note : gcc will optimise the whole section away if
- * WIRELESS_SPY is not defined... - Jean II */
- if (SPY_NUMBER(priv)) {
- orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN,
- desc->signal, desc->silence);
- }
-}
-
-/*
- * orinoco_rx_monitor - handle received monitor frames.
- *
- * Arguments:
- * dev network device
- * rxfid received FID
- * desc rx descriptor of the frame
- *
- * Call context: interrupt
- */
-static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
- struct hermes_rx_descriptor *desc)
-{
- u32 hdrlen = 30; /* return full header by default */
- u32 datalen = 0;
- u16 fc;
- int err;
- int len;
- struct sk_buff *skb;
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- struct hermes *hw = &priv->hw;
-
- len = le16_to_cpu(desc->data_len);
-
- /* Determine the size of the header and the data */
- fc = le16_to_cpu(desc->frame_ctl);
- switch (fc & IEEE80211_FCTL_FTYPE) {
- case IEEE80211_FTYPE_DATA:
- if ((fc & IEEE80211_FCTL_TODS)
- && (fc & IEEE80211_FCTL_FROMDS))
- hdrlen = 30;
- else
- hdrlen = 24;
- datalen = len;
- break;
- case IEEE80211_FTYPE_MGMT:
- hdrlen = 24;
- datalen = len;
- break;
- case IEEE80211_FTYPE_CTL:
- switch (fc & IEEE80211_FCTL_STYPE) {
- case IEEE80211_STYPE_PSPOLL:
- case IEEE80211_STYPE_RTS:
- case IEEE80211_STYPE_CFEND:
- case IEEE80211_STYPE_CFENDACK:
- hdrlen = 16;
- break;
- case IEEE80211_STYPE_CTS:
- case IEEE80211_STYPE_ACK:
- hdrlen = 10;
- break;
- }
- break;
- default:
- /* Unknown frame type */
- break;
- }
-
- /* sanity check the length */
- if (datalen > IEEE80211_MAX_DATA_LEN + 12) {
- printk(KERN_DEBUG "%s: oversized monitor frame, "
- "data length = %d\n", dev->name, datalen);
- stats->rx_length_errors++;
- goto update_stats;
- }
-
- skb = dev_alloc_skb(hdrlen + datalen);
- if (!skb) {
- printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
- dev->name);
- goto update_stats;
- }
-
- /* Copy the 802.11 header to the skb */
- memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen);
- skb_reset_mac_header(skb);
-
- /* If any, copy the data from the card to the skb */
- if (datalen > 0) {
- err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
- ALIGN(datalen, 2), rxfid,
- HERMES_802_2_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: error %d reading monitor frame\n",
- dev->name, err);
- goto drop;
- }
- }
-
- skb->dev = dev;
- skb->ip_summed = CHECKSUM_NONE;
- skb->pkt_type = PACKET_OTHERHOST;
- skb->protocol = cpu_to_be16(ETH_P_802_2);
-
- stats->rx_packets++;
- stats->rx_bytes += skb->len;
-
- netif_rx(skb);
- return;
-
- drop:
- dev_kfree_skb_irq(skb);
- update_stats:
- stats->rx_errors++;
- stats->rx_dropped++;
-}
-
-void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- struct iw_statistics *wstats = &priv->wstats;
- struct sk_buff *skb = NULL;
- u16 rxfid, status;
- int length;
- struct hermes_rx_descriptor *desc;
- struct orinoco_rx_data *rx_data;
- int err;
-
- desc = kmalloc(sizeof(*desc), GFP_ATOMIC);
- if (!desc)
- goto update_stats;
-
- rxfid = hermes_read_regn(hw, RXFID);
-
- err = hw->ops->bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
- rxfid, 0);
- if (err) {
- printk(KERN_ERR "%s: error %d reading Rx descriptor. "
- "Frame dropped.\n", dev->name, err);
- goto update_stats;
- }
-
- status = le16_to_cpu(desc->status);
-
- if (status & HERMES_RXSTAT_BADCRC) {
- DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
- dev->name);
- stats->rx_crc_errors++;
- goto update_stats;
- }
-
- /* Handle frames in monitor mode */
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
- orinoco_rx_monitor(dev, rxfid, desc);
- goto out;
- }
-
- if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
- DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
- dev->name);
- wstats->discard.code++;
- goto update_stats;
- }
-
- length = le16_to_cpu(desc->data_len);
-
- /* Sanity checks */
- if (length < 3) { /* No for even an 802.2 LLC header */
- /* At least on Symbol firmware with PCF we get quite a
- lot of these legitimately - Poll frames with no
- data. */
- goto out;
- }
- if (length > IEEE80211_MAX_DATA_LEN) {
- printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
- dev->name, length);
- stats->rx_length_errors++;
- goto update_stats;
- }
-
- /* Payload size does not include Michael MIC. Increase payload
- * size to read it together with the data. */
- if (status & HERMES_RXSTAT_MIC)
- length += MICHAEL_MIC_LEN;
-
- /* We need space for the packet data itself, plus an ethernet
- header, plus 2 bytes so we can align the IP header on a
- 32bit boundary, plus 1 byte so we can read in odd length
- packets from the card, which has an IO granularity of 16
- bits */
- skb = dev_alloc_skb(length + ETH_HLEN + 2 + 1);
- if (!skb) {
- printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
- dev->name);
- goto update_stats;
- }
-
- /* We'll prepend the header, so reserve space for it. The worst
- case is no decapsulation, when 802.3 header is prepended and
- nothing is removed. 2 is for aligning the IP header. */
- skb_reserve(skb, ETH_HLEN + 2);
-
- err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, length),
- ALIGN(length, 2), rxfid,
- HERMES_802_2_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: error %d reading frame. "
- "Frame dropped.\n", dev->name, err);
- goto drop;
- }
-
- /* Add desc and skb to rx queue */
- rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC);
- if (!rx_data)
- goto drop;
-
- rx_data->desc = desc;
- rx_data->skb = skb;
- list_add_tail(&rx_data->list, &priv->rx_list);
- tasklet_schedule(&priv->rx_tasklet);
-
- return;
-
-drop:
- dev_kfree_skb_irq(skb);
-update_stats:
- stats->rx_errors++;
- stats->rx_dropped++;
-out:
- kfree(desc);
-}
-EXPORT_SYMBOL(__orinoco_ev_rx);
-
-static void orinoco_rx(struct net_device *dev,
- struct hermes_rx_descriptor *desc,
- struct sk_buff *skb)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
- u16 status, fc;
- int length;
- struct ethhdr *hdr;
-
- status = le16_to_cpu(desc->status);
- length = le16_to_cpu(desc->data_len);
- fc = le16_to_cpu(desc->frame_ctl);
-
- /* Calculate and check MIC */
- if (status & HERMES_RXSTAT_MIC) {
- struct orinoco_tkip_key *key;
- int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >>
- HERMES_MIC_KEY_ID_SHIFT);
- u8 mic[MICHAEL_MIC_LEN];
- u8 *rxmic;
- u8 *src = (fc & IEEE80211_FCTL_FROMDS) ?
- desc->addr3 : desc->addr2;
-
- /* Extract Michael MIC from payload */
- rxmic = skb->data + skb->len - MICHAEL_MIC_LEN;
-
- skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
- length -= MICHAEL_MIC_LEN;
-
- key = (struct orinoco_tkip_key *) priv->keys[key_id].key;
-
- if (!key) {
- printk(KERN_WARNING "%s: Received encrypted frame from "
- "%pM using key %i, but key is not installed\n",
- dev->name, src, key_id);
- goto drop;
- }
-
- orinoco_mic(priv->rx_tfm_mic, key->rx_mic, desc->addr1, src,
- 0, /* priority or QoS? */
- skb->data, skb->len, &mic[0]);
-
- if (memcmp(mic, rxmic,
- MICHAEL_MIC_LEN)) {
- union iwreq_data wrqu;
- struct iw_michaelmicfailure wxmic;
-
- printk(KERN_WARNING "%s: "
- "Invalid Michael MIC in data frame from %pM, "
- "using key %i\n",
- dev->name, src, key_id);
-
- /* TODO: update stats */
-
- /* Notify userspace */
- memset(&wxmic, 0, sizeof(wxmic));
- wxmic.flags = key_id & IW_MICFAILURE_KEY_ID;
- wxmic.flags |= (desc->addr1[0] & 1) ?
- IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE;
- wxmic.src_addr.sa_family = ARPHRD_ETHER;
- memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN);
-
- (void) orinoco_hw_get_tkip_iv(priv, key_id,
- &wxmic.tsc[0]);
-
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.length = sizeof(wxmic);
- wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu,
- (char *) &wxmic);
-
- goto drop;
- }
- }
-
- /* Handle decapsulation
- * In most cases, the firmware tell us about SNAP frames.
- * For some reason, the SNAP frames sent by LinkSys APs
- * are not properly recognised by most firmwares.
- * So, check ourselves */
- if (length >= ENCAPS_OVERHEAD &&
- (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
- ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
- is_ethersnap(skb->data))) {
- /* These indicate a SNAP within 802.2 LLC within
- 802.11 frame which we'll need to de-encapsulate to
- the original EthernetII frame. */
- hdr = (struct ethhdr *)skb_push(skb,
- ETH_HLEN - ENCAPS_OVERHEAD);
- } else {
- /* 802.3 frame - prepend 802.3 header as is */
- hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN);
- hdr->h_proto = htons(length);
- }
- memcpy(hdr->h_dest, desc->addr1, ETH_ALEN);
- if (fc & IEEE80211_FCTL_FROMDS)
- memcpy(hdr->h_source, desc->addr3, ETH_ALEN);
- else
- memcpy(hdr->h_source, desc->addr2, ETH_ALEN);
-
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_NONE;
- if (fc & IEEE80211_FCTL_TODS)
- skb->pkt_type = PACKET_OTHERHOST;
-
- /* Process the wireless stats if needed */
- orinoco_stat_gather(dev, skb, desc);
-
- /* Pass the packet to the networking stack */
- netif_rx(skb);
- stats->rx_packets++;
- stats->rx_bytes += length;
-
- return;
-
- drop:
- dev_kfree_skb(skb);
- stats->rx_errors++;
- stats->rx_dropped++;
-}
-
-static void orinoco_rx_isr_tasklet(unsigned long data)
-{
- struct orinoco_private *priv = (struct orinoco_private *) data;
- struct net_device *dev = priv->ndev;
- struct orinoco_rx_data *rx_data, *temp;
- struct hermes_rx_descriptor *desc;
- struct sk_buff *skb;
- unsigned long flags;
-
- /* orinoco_rx requires the driver lock, and we also need to
- * protect priv->rx_list, so just hold the lock over the
- * lot.
- *
- * If orinoco_lock fails, we've unplugged the card. In this
- * case just abort. */
- if (orinoco_lock(priv, &flags) != 0)
- return;
-
- /* extract desc and skb from queue */
- list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
- desc = rx_data->desc;
- skb = rx_data->skb;
- list_del(&rx_data->list);
- kfree(rx_data);
-
- orinoco_rx(dev, desc, skb);
-
- kfree(desc);
- }
-
- orinoco_unlock(priv, &flags);
-}
-
-/********************************************************************/
-/* Rx path (info frames) */
-/********************************************************************/
-
-static void print_linkstatus(struct net_device *dev, u16 status)
-{
- char *s;
-
- if (suppress_linkstatus)
- return;
-
- switch (status) {
- case HERMES_LINKSTATUS_NOT_CONNECTED:
- s = "Not Connected";
- break;
- case HERMES_LINKSTATUS_CONNECTED:
- s = "Connected";
- break;
- case HERMES_LINKSTATUS_DISCONNECTED:
- s = "Disconnected";
- break;
- case HERMES_LINKSTATUS_AP_CHANGE:
- s = "AP Changed";
- break;
- case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
- s = "AP Out of Range";
- break;
- case HERMES_LINKSTATUS_AP_IN_RANGE:
- s = "AP In Range";
- break;
- case HERMES_LINKSTATUS_ASSOC_FAILED:
- s = "Association Failed";
- break;
- default:
- s = "UNKNOWN";
- }
-
- printk(KERN_DEBUG "%s: New link status: %s (%04x)\n",
- dev->name, s, status);
-}
-
-/* Search scan results for requested BSSID, join it if found */
-static void orinoco_join_ap(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, join_work);
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
- unsigned long flags;
- struct join_req {
- u8 bssid[ETH_ALEN];
- __le16 channel;
- } __packed req;
- const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
- struct prism2_scan_apinfo *atom = NULL;
- int offset = 4;
- int found = 0;
- u8 *buf;
- u16 len;
-
- /* Allocate buffer for scan results */
- buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL);
- if (!buf)
- return;
-
- if (orinoco_lock(priv, &flags) != 0)
- goto fail_lock;
-
- /* Sanity checks in case user changed something in the meantime */
- if (!priv->bssid_fixed)
- goto out;
-
- if (strlen(priv->desired_essid) == 0)
- goto out;
-
- /* Read scan results from the firmware */
- err = hw->ops->read_ltv(hw, USER_BAP,
- HERMES_RID_SCANRESULTSTABLE,
- MAX_SCAN_LEN, &len, buf);
- if (err) {
- printk(KERN_ERR "%s: Cannot read scan results\n",
- dev->name);
- goto out;
- }
-
- len = HERMES_RECLEN_TO_BYTES(len);
-
- /* Go through the scan results looking for the channel of the AP
- * we were requested to join */
- for (; offset + atom_len <= len; offset += atom_len) {
- atom = (struct prism2_scan_apinfo *) (buf + offset);
- if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) {
- found = 1;
- break;
- }
- }
-
- if (!found) {
- DEBUG(1, "%s: Requested AP not found in scan results\n",
- dev->name);
- goto out;
- }
-
- memcpy(req.bssid, priv->desired_bssid, ETH_ALEN);
- req.channel = atom->channel; /* both are little-endian */
- err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST,
- &req);
- if (err)
- printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
-
- out:
- orinoco_unlock(priv, &flags);
-
- fail_lock:
- kfree(buf);
-}
-
-/* Send new BSSID to userspace */
-static void orinoco_send_bssid_wevent(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- union iwreq_data wrqu;
- int err;
-
- err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
- if (err != 0)
- return;
-
- wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-
- /* Send event to user space */
- wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
-}
-
-static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- union iwreq_data wrqu;
- int err;
- u8 buf[88];
- u8 *ie;
-
- if (!priv->has_wpa)
- return;
-
- err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
- sizeof(buf), NULL, &buf);
- if (err != 0)
- return;
-
- ie = orinoco_get_wpa_ie(buf, sizeof(buf));
- if (ie) {
- int rem = sizeof(buf) - (ie - &buf[0]);
- wrqu.data.length = ie[1] + 2;
- if (wrqu.data.length > rem)
- wrqu.data.length = rem;
-
- if (wrqu.data.length)
- /* Send event to user space */
- wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie);
- }
-}
-
-static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- union iwreq_data wrqu;
- int err;
- u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */
- u8 *ie;
-
- if (!priv->has_wpa)
- return;
-
- err = hw->ops->read_ltv(hw, USER_BAP,
- HERMES_RID_CURRENT_ASSOC_RESP_INFO,
- sizeof(buf), NULL, &buf);
- if (err != 0)
- return;
-
- ie = orinoco_get_wpa_ie(buf, sizeof(buf));
- if (ie) {
- int rem = sizeof(buf) - (ie - &buf[0]);
- wrqu.data.length = ie[1] + 2;
- if (wrqu.data.length > rem)
- wrqu.data.length = rem;
-
- if (wrqu.data.length)
- /* Send event to user space */
- wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie);
- }
-}
-
-static void orinoco_send_wevents(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, wevent_work);
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return;
-
- orinoco_send_assocreqie_wevent(priv);
- orinoco_send_assocrespie_wevent(priv);
- orinoco_send_bssid_wevent(priv);
-
- orinoco_unlock(priv, &flags);
-}
-
-static void qbuf_scan(struct orinoco_private *priv, void *buf,
- int len, int type)
-{
- struct orinoco_scan_data *sd;
- unsigned long flags;
-
- sd = kmalloc(sizeof(*sd), GFP_ATOMIC);
- if (!sd)
- return;
-
- sd->buf = buf;
- sd->len = len;
- sd->type = type;
-
- spin_lock_irqsave(&priv->scan_lock, flags);
- list_add_tail(&sd->list, &priv->scan_list);
- spin_unlock_irqrestore(&priv->scan_lock, flags);
-
- schedule_work(&priv->process_scan);
-}
-
-static void qabort_scan(struct orinoco_private *priv)
-{
- struct orinoco_scan_data *sd;
- unsigned long flags;
-
- sd = kmalloc(sizeof(*sd), GFP_ATOMIC);
- if (!sd)
- return;
-
- sd->len = -1; /* Abort */
-
- spin_lock_irqsave(&priv->scan_lock, flags);
- list_add_tail(&sd->list, &priv->scan_list);
- spin_unlock_irqrestore(&priv->scan_lock, flags);
-
- schedule_work(&priv->process_scan);
-}
-
-static void orinoco_process_scan_results(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, process_scan);
- struct orinoco_scan_data *sd, *temp;
- unsigned long flags;
- void *buf;
- int len;
- int type;
-
- spin_lock_irqsave(&priv->scan_lock, flags);
- list_for_each_entry_safe(sd, temp, &priv->scan_list, list) {
-
- buf = sd->buf;
- len = sd->len;
- type = sd->type;
-
- list_del(&sd->list);
- spin_unlock_irqrestore(&priv->scan_lock, flags);
- kfree(sd);
-
- if (len > 0) {
- if (type == HERMES_INQ_CHANNELINFO)
- orinoco_add_extscan_result(priv, buf, len);
- else
- orinoco_add_hostscan_results(priv, buf, len);
-
- kfree(buf);
- } else {
- /* Either abort or complete the scan */
- orinoco_scan_done(priv, (len < 0));
- }
-
- spin_lock_irqsave(&priv->scan_lock, flags);
- }
- spin_unlock_irqrestore(&priv->scan_lock, flags);
-}
-
-void __orinoco_ev_info(struct net_device *dev, struct hermes *hw)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- u16 infofid;
- struct {
- __le16 len;
- __le16 type;
- } __packed info;
- int len, type;
- int err;
-
- /* This is an answer to an INQUIRE command that we did earlier,
- * or an information "event" generated by the card
- * The controller return to us a pseudo frame containing
- * the information in question - Jean II */
- infofid = hermes_read_regn(hw, INFOFID);
-
- /* Read the info frame header - don't try too hard */
- err = hw->ops->bap_pread(hw, IRQ_BAP, &info, sizeof(info),
- infofid, 0);
- if (err) {
- printk(KERN_ERR "%s: error %d reading info frame. "
- "Frame dropped.\n", dev->name, err);
- return;
- }
-
- len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
- type = le16_to_cpu(info.type);
-
- switch (type) {
- case HERMES_INQ_TALLIES: {
- struct hermes_tallies_frame tallies;
- struct iw_statistics *wstats = &priv->wstats;
-
- if (len > sizeof(tallies)) {
- printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
- dev->name, len);
- len = sizeof(tallies);
- }
-
- err = hw->ops->bap_pread(hw, IRQ_BAP, &tallies, len,
- infofid, sizeof(info));
- if (err)
- break;
-
- /* Increment our various counters */
- /* wstats->discard.nwid - no wrong BSSID stuff */
- wstats->discard.code +=
- le16_to_cpu(tallies.RxWEPUndecryptable);
- if (len == sizeof(tallies))
- wstats->discard.code +=
- le16_to_cpu(tallies.RxDiscards_WEPICVError) +
- le16_to_cpu(tallies.RxDiscards_WEPExcluded);
- wstats->discard.misc +=
- le16_to_cpu(tallies.TxDiscardsWrongSA);
- wstats->discard.fragment +=
- le16_to_cpu(tallies.RxMsgInBadMsgFragments);
- wstats->discard.retries +=
- le16_to_cpu(tallies.TxRetryLimitExceeded);
- /* wstats->miss.beacon - no match */
- }
- break;
- case HERMES_INQ_LINKSTATUS: {
- struct hermes_linkstatus linkstatus;
- u16 newstatus;
- int connected;
-
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
- break;
-
- if (len != sizeof(linkstatus)) {
- printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
- dev->name, len);
- break;
- }
-
- err = hw->ops->bap_pread(hw, IRQ_BAP, &linkstatus, len,
- infofid, sizeof(info));
- if (err)
- break;
- newstatus = le16_to_cpu(linkstatus.linkstatus);
-
- /* Symbol firmware uses "out of range" to signal that
- * the hostscan frame can be requested. */
- if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
- priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
- priv->has_hostscan && priv->scan_request) {
- hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
- break;
- }
-
- connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
- || (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
- || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
-
- if (connected)
- netif_carrier_on(dev);
- else if (!ignore_disconnect)
- netif_carrier_off(dev);
-
- if (newstatus != priv->last_linkstatus) {
- priv->last_linkstatus = newstatus;
- print_linkstatus(dev, newstatus);
- /* The info frame contains only one word which is the
- * status (see hermes.h). The status is pretty boring
- * in itself, that's why we export the new BSSID...
- * Jean II */
- schedule_work(&priv->wevent_work);
- }
- }
- break;
- case HERMES_INQ_SCAN:
- if (!priv->scan_request && priv->bssid_fixed &&
- priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
- schedule_work(&priv->join_work);
- break;
- }
- /* fall through */
- case HERMES_INQ_HOSTSCAN:
- case HERMES_INQ_HOSTSCAN_SYMBOL: {
- /* Result of a scanning. Contains information about
- * cells in the vicinity - Jean II */
- unsigned char *buf;
-
- /* Sanity check */
- if (len > 4096) {
- printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
- dev->name, len);
- qabort_scan(priv);
- break;
- }
-
- /* Allocate buffer for results */
- buf = kmalloc(len, GFP_ATOMIC);
- if (buf == NULL) {
- /* No memory, so can't printk()... */
- qabort_scan(priv);
- break;
- }
-
- /* Read scan data */
- err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) buf, len,
- infofid, sizeof(info));
- if (err) {
- kfree(buf);
- qabort_scan(priv);
- break;
- }
-
-#ifdef ORINOCO_DEBUG
- {
- int i;
- printk(KERN_DEBUG "Scan result [%02X", buf[0]);
- for (i = 1; i < (len * 2); i++)
- printk(":%02X", buf[i]);
- printk("]\n");
- }
-#endif /* ORINOCO_DEBUG */
-
- qbuf_scan(priv, buf, len, type);
- }
- break;
- case HERMES_INQ_CHANNELINFO:
- {
- struct agere_ext_scan_info *bss;
-
- if (!priv->scan_request) {
- printk(KERN_DEBUG "%s: Got chaninfo without scan, "
- "len=%d\n", dev->name, len);
- break;
- }
-
- /* An empty result indicates that the scan is complete */
- if (len == 0) {
- qbuf_scan(priv, NULL, len, type);
- break;
- }
-
- /* Sanity check */
- else if (len < (offsetof(struct agere_ext_scan_info,
- data) + 2)) {
- /* Drop this result now so we don't have to
- * keep checking later */
- printk(KERN_WARNING
- "%s: Ext scan results too short (%d bytes)\n",
- dev->name, len);
- break;
- }
-
- bss = kmalloc(len, GFP_ATOMIC);
- if (bss == NULL)
- break;
-
- /* Read scan data */
- err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) bss, len,
- infofid, sizeof(info));
- if (err)
- kfree(bss);
- else
- qbuf_scan(priv, bss, len, type);
-
- break;
- }
- case HERMES_INQ_SEC_STAT_AGERE:
- /* Security status (Agere specific) */
- /* Ignore this frame for now */
- if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
- break;
- /* fall through */
- default:
- printk(KERN_DEBUG "%s: Unknown information frame received: "
- "type 0x%04x, length %d\n", dev->name, type, len);
- /* We don't actually do anything about it */
- break;
- }
-}
-EXPORT_SYMBOL(__orinoco_ev_info);
-
-static void __orinoco_ev_infdrop(struct net_device *dev, struct hermes *hw)
-{
- if (net_ratelimit())
- printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
-}
-
-/********************************************************************/
-/* Internal hardware control routines */
-/********************************************************************/
-
-static int __orinoco_up(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
-
- netif_carrier_off(dev); /* just to make sure */
-
- err = __orinoco_commit(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d configuring card\n",
- dev->name, err);
- return err;
- }
-
- /* Fire things up again */
- hermes_set_irqmask(hw, ORINOCO_INTEN);
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_ERR "%s: Error %d enabling MAC port\n",
- dev->name, err);
- return err;
- }
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-static int __orinoco_down(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
-
- netif_stop_queue(dev);
-
- if (!priv->hw_unavailable) {
- if (!priv->broken_disableport) {
- err = hermes_disable_port(hw, 0);
- if (err) {
- /* Some firmwares (e.g. Intersil 1.3.x) seem
- * to have problems disabling the port, oh
- * well, too bad. */
- printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
- dev->name, err);
- priv->broken_disableport = 1;
- }
- }
- hermes_set_irqmask(hw, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
- }
-
- orinoco_scan_done(priv, true);
-
- /* firmware will have to reassociate */
- netif_carrier_off(dev);
- priv->last_linkstatus = 0xffff;
-
- return 0;
-}
-
-static int orinoco_reinit_firmware(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- int err;
-
- err = hw->ops->init(hw);
- if (priv->do_fw_download && !err) {
- err = orinoco_download(priv);
- if (err)
- priv->do_fw_download = 0;
- }
- if (!err)
- err = orinoco_hw_allocate_fid(priv);
-
- return err;
-}
-
-static int
-__orinoco_set_multicast_list(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int err = 0;
- int promisc, mc_count;
-
- /* The Hermes doesn't seem to have an allmulti mode, so we go
- * into promiscuous mode and let the upper levels deal. */
- if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
- (netdev_mc_count(dev) > MAX_MULTICAST(priv))) {
- promisc = 1;
- mc_count = 0;
- } else {
- promisc = 0;
- mc_count = netdev_mc_count(dev);
- }
-
- err = __orinoco_hw_set_multicast_list(priv, dev, mc_count, promisc);
-
- return err;
-}
-
-/* This must be called from user context, without locks held - use
- * schedule_work() */
-void orinoco_reset(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, reset_work);
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- /* When the hardware becomes available again, whatever
- * detects that is responsible for re-initializing
- * it. So no need for anything further */
- return;
-
- netif_stop_queue(dev);
-
- /* Shut off interrupts. Depending on what state the hardware
- * is in, this might not work, but we'll try anyway */
- hermes_set_irqmask(hw, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
-
- priv->hw_unavailable++;
- priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
- netif_carrier_off(dev);
-
- orinoco_unlock(priv, &flags);
-
- /* Scanning support: Notify scan cancellation */
- orinoco_scan_done(priv, true);
-
- if (priv->hard_reset) {
- err = (*priv->hard_reset)(priv);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d "
- "performing hard reset\n", dev->name, err);
- goto disable;
- }
- }
-
- err = orinoco_reinit_firmware(priv);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
- dev->name, err);
- goto disable;
- }
-
- /* This has to be called from user context */
- orinoco_lock_irq(priv);
-
- priv->hw_unavailable--;
-
- /* priv->open or priv->hw_unavailable might have changed while
- * we dropped the lock */
- if (priv->open && (!priv->hw_unavailable)) {
- err = __orinoco_up(priv);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
- dev->name, err);
- } else
- dev->trans_start = jiffies;
- }
-
- orinoco_unlock_irq(priv);
-
- return;
- disable:
- hermes_set_irqmask(hw, 0);
- netif_device_detach(dev);
- printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
-}
-
-static int __orinoco_commit(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- int err = 0;
-
- /* If we've called commit, we are reconfiguring or bringing the
- * interface up. Maintaining countermeasures across this would
- * be confusing, so note that we've disabled them. The port will
- * be enabled later in orinoco_commit or __orinoco_up. */
- priv->tkip_cm_active = 0;
-
- err = orinoco_hw_program_rids(priv);
-
- /* FIXME: what about netif_tx_lock */
- (void) __orinoco_set_multicast_list(dev);
-
- return err;
-}
-
-/* Ensures configuration changes are applied. May result in a reset.
- * The caller should hold priv->lock
- */
-int orinoco_commit(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
-
- if (priv->broken_disableport) {
- schedule_work(&priv->reset_work);
- return 0;
- }
-
- err = hermes_disable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to disable port "
- "while reconfiguring card\n", dev->name);
- priv->broken_disableport = 1;
- goto out;
- }
-
- err = __orinoco_commit(priv);
- if (err) {
- printk(KERN_WARNING "%s: Unable to reconfigure card\n",
- dev->name);
- goto out;
- }
-
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
- dev->name);
- goto out;
- }
-
- out:
- if (err) {
- printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
- schedule_work(&priv->reset_work);
- err = 0;
- }
- return err;
-}
-
-/********************************************************************/
-/* Interrupt handler */
-/********************************************************************/
-
-static void __orinoco_ev_tick(struct net_device *dev, struct hermes *hw)
-{
- printk(KERN_DEBUG "%s: TICK\n", dev->name);
-}
-
-static void __orinoco_ev_wterr(struct net_device *dev, struct hermes *hw)
-{
- /* This seems to happen a fair bit under load, but ignoring it
- seems to work fine...*/
- printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
- dev->name);
-}
-
-irqreturn_t orinoco_interrupt(int irq, void *dev_id)
-{
- struct orinoco_private *priv = dev_id;
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int count = MAX_IRQLOOPS_PER_IRQ;
- u16 evstat, events;
- /* These are used to detect a runaway interrupt situation.
- *
- * If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
- * we panic and shut down the hardware
- */
- /* jiffies value the last time we were called */
- static int last_irq_jiffy; /* = 0 */
- static int loops_this_jiffy; /* = 0 */
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0) {
- /* If hw is unavailable - we don't know if the irq was
- * for us or not */
- return IRQ_HANDLED;
- }
-
- evstat = hermes_read_regn(hw, EVSTAT);
- events = evstat & hw->inten;
- if (!events) {
- orinoco_unlock(priv, &flags);
- return IRQ_NONE;
- }
-
- if (jiffies != last_irq_jiffy)
- loops_this_jiffy = 0;
- last_irq_jiffy = jiffies;
-
- while (events && count--) {
- if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
- printk(KERN_WARNING "%s: IRQ handler is looping too "
- "much! Resetting.\n", dev->name);
- /* Disable interrupts for now */
- hermes_set_irqmask(hw, 0);
- schedule_work(&priv->reset_work);
- break;
- }
-
- /* Check the card hasn't been removed */
- if (!hermes_present(hw)) {
- DEBUG(0, "orinoco_interrupt(): card removed\n");
- break;
- }
-
- if (events & HERMES_EV_TICK)
- __orinoco_ev_tick(dev, hw);
- if (events & HERMES_EV_WTERR)
- __orinoco_ev_wterr(dev, hw);
- if (events & HERMES_EV_INFDROP)
- __orinoco_ev_infdrop(dev, hw);
- if (events & HERMES_EV_INFO)
- __orinoco_ev_info(dev, hw);
- if (events & HERMES_EV_RX)
- __orinoco_ev_rx(dev, hw);
- if (events & HERMES_EV_TXEXC)
- __orinoco_ev_txexc(dev, hw);
- if (events & HERMES_EV_TX)
- __orinoco_ev_tx(dev, hw);
- if (events & HERMES_EV_ALLOC)
- __orinoco_ev_alloc(dev, hw);
-
- hermes_write_regn(hw, EVACK, evstat);
-
- evstat = hermes_read_regn(hw, EVSTAT);
- events = evstat & hw->inten;
- }
-
- orinoco_unlock(priv, &flags);
- return IRQ_HANDLED;
-}
-EXPORT_SYMBOL(orinoco_interrupt);
-
-/********************************************************************/
-/* Power management */
-/********************************************************************/
-#if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT)
-static int orinoco_pm_notifier(struct notifier_block *notifier,
- unsigned long pm_event,
- void *unused)
-{
- struct orinoco_private *priv = container_of(notifier,
- struct orinoco_private,
- pm_notifier);
-
- /* All we need to do is cache the firmware before suspend, and
- * release it when we come out.
- *
- * Only need to do this if we're downloading firmware. */
- if (!priv->do_fw_download)
- return NOTIFY_DONE;
-
- switch (pm_event) {
- case PM_HIBERNATION_PREPARE:
- case PM_SUSPEND_PREPARE:
- orinoco_cache_fw(priv, 0);
- break;
-
- case PM_POST_RESTORE:
- /* Restore from hibernation failed. We need to clean
- * up in exactly the same way, so fall through. */
- case PM_POST_HIBERNATION:
- case PM_POST_SUSPEND:
- orinoco_uncache_fw(priv);
- break;
-
- case PM_RESTORE_PREPARE:
- default:
- break;
- }
-
- return NOTIFY_DONE;
-}
-
-static void orinoco_register_pm_notifier(struct orinoco_private *priv)
-{
- priv->pm_notifier.notifier_call = orinoco_pm_notifier;
- register_pm_notifier(&priv->pm_notifier);
-}
-
-static void orinoco_unregister_pm_notifier(struct orinoco_private *priv)
-{
- unregister_pm_notifier(&priv->pm_notifier);
-}
-#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
-#define orinoco_register_pm_notifier(priv) do { } while (0)
-#define orinoco_unregister_pm_notifier(priv) do { } while (0)
-#endif
-
-/********************************************************************/
-/* Initialization */
-/********************************************************************/
-
-int orinoco_init(struct orinoco_private *priv)
-{
- struct device *dev = priv->dev;
- struct wiphy *wiphy = priv_to_wiphy(priv);
- struct hermes *hw = &priv->hw;
- int err = 0;
-
- /* No need to lock, the hw_unavailable flag is already set in
- * alloc_orinocodev() */
- priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN;
-
- /* Initialize the firmware */
- err = hw->ops->init(hw);
- if (err != 0) {
- dev_err(dev, "Failed to initialize firmware (err = %d)\n",
- err);
- goto out;
- }
-
- err = determine_fw_capabilities(priv, wiphy->fw_version,
- sizeof(wiphy->fw_version),
- &wiphy->hw_version);
- if (err != 0) {
- dev_err(dev, "Incompatible firmware, aborting\n");
- goto out;
- }
-
- if (priv->do_fw_download) {
-#ifdef CONFIG_HERMES_CACHE_FW_ON_INIT
- orinoco_cache_fw(priv, 0);
-#endif
-
- err = orinoco_download(priv);
- if (err)
- priv->do_fw_download = 0;
-
- /* Check firmware version again */
- err = determine_fw_capabilities(priv, wiphy->fw_version,
- sizeof(wiphy->fw_version),
- &wiphy->hw_version);
- if (err != 0) {
- dev_err(dev, "Incompatible firmware, aborting\n");
- goto out;
- }
- }
-
- if (priv->has_port3)
- dev_info(dev, "Ad-hoc demo mode supported\n");
- if (priv->has_ibss)
- dev_info(dev, "IEEE standard IBSS ad-hoc mode supported\n");
- if (priv->has_wep)
- dev_info(dev, "WEP supported, %s-bit key\n",
- priv->has_big_wep ? "104" : "40");
- if (priv->has_wpa) {
- dev_info(dev, "WPA-PSK supported\n");
- if (orinoco_mic_init(priv)) {
- dev_err(dev, "Failed to setup MIC crypto algorithm. "
- "Disabling WPA support\n");
- priv->has_wpa = 0;
- }
- }
-
- err = orinoco_hw_read_card_settings(priv, wiphy->perm_addr);
- if (err)
- goto out;
-
- err = orinoco_hw_allocate_fid(priv);
- if (err) {
- dev_err(dev, "Failed to allocate NIC buffer!\n");
- goto out;
- }
-
- /* Set up the default configuration */
- priv->iw_mode = NL80211_IFTYPE_STATION;
- /* By default use IEEE/IBSS ad-hoc mode if we have it */
- priv->prefer_port3 = priv->has_port3 && (!priv->has_ibss);
- set_port_type(priv);
- priv->channel = 0; /* use firmware default */
-
- priv->promiscuous = 0;
- priv->encode_alg = ORINOCO_ALG_NONE;
- priv->tx_key = 0;
- priv->wpa_enabled = 0;
- priv->tkip_cm_active = 0;
- priv->key_mgmt = 0;
- priv->wpa_ie_len = 0;
- priv->wpa_ie = NULL;
-
- if (orinoco_wiphy_register(wiphy)) {
- err = -ENODEV;
- goto out;
- }
-
- /* Make the hardware available, as long as it hasn't been
- * removed elsewhere (e.g. by PCMCIA hot unplug) */
- orinoco_lock_irq(priv);
- priv->hw_unavailable--;
- orinoco_unlock_irq(priv);
-
- dev_dbg(dev, "Ready\n");
-
- out:
- return err;
-}
-EXPORT_SYMBOL(orinoco_init);
-
-static const struct net_device_ops orinoco_netdev_ops = {
- .ndo_open = orinoco_open,
- .ndo_stop = orinoco_stop,
- .ndo_start_xmit = orinoco_xmit,
- .ndo_set_rx_mode = orinoco_set_multicast_list,
- .ndo_change_mtu = orinoco_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_tx_timeout = orinoco_tx_timeout,
- .ndo_get_stats = orinoco_get_stats,
-};
-
-/* Allocate private data.
- *
- * This driver has a number of structures associated with it
- * netdev - Net device structure for each network interface
- * wiphy - structure associated with wireless phy
- * wireless_dev (wdev) - structure for each wireless interface
- * hw - structure for hermes chip info
- * card - card specific structure for use by the card driver
- * (airport, orinoco_cs)
- * priv - orinoco private data
- * device - generic linux device structure
- *
- * +---------+ +---------+
- * | wiphy | | netdev |
- * | +-------+ | +-------+
- * | | priv | | | wdev |
- * | | +-----+ +-+-------+
- * | | | hw |
- * | +-+-----+
- * | | card |
- * +-+-------+
- *
- * priv has a link to netdev and device
- * wdev has a link to wiphy
- */
-struct orinoco_private
-*alloc_orinocodev(int sizeof_card,
- struct device *device,
- int (*hard_reset)(struct orinoco_private *),
- int (*stop_fw)(struct orinoco_private *, int))
-{
- struct orinoco_private *priv;
- struct wiphy *wiphy;
-
- /* allocate wiphy
- * NOTE: We only support a single virtual interface
- * but this may change when monitor mode is added
- */
- wiphy = wiphy_new(&orinoco_cfg_ops,
- sizeof(struct orinoco_private) + sizeof_card);
- if (!wiphy)
- return NULL;
-
- priv = wiphy_priv(wiphy);
- priv->dev = device;
-
- if (sizeof_card)
- priv->card = (void *)((unsigned long)priv
- + sizeof(struct orinoco_private));
- else
- priv->card = NULL;
-
- orinoco_wiphy_init(wiphy);
-
-#ifdef WIRELESS_SPY
- priv->wireless_data.spy_data = &priv->spy_data;
-#endif
-
- /* Set up default callbacks */
- priv->hard_reset = hard_reset;
- priv->stop_fw = stop_fw;
-
- spin_lock_init(&priv->lock);
- priv->open = 0;
- priv->hw_unavailable = 1; /* orinoco_init() must clear this
- * before anything else touches the
- * hardware */
- INIT_WORK(&priv->reset_work, orinoco_reset);
- INIT_WORK(&priv->join_work, orinoco_join_ap);
- INIT_WORK(&priv->wevent_work, orinoco_send_wevents);
-
- INIT_LIST_HEAD(&priv->rx_list);
- tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet,
- (unsigned long) priv);
-
- spin_lock_init(&priv->scan_lock);
- INIT_LIST_HEAD(&priv->scan_list);
- INIT_WORK(&priv->process_scan, orinoco_process_scan_results);
-
- priv->last_linkstatus = 0xffff;
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
- priv->cached_pri_fw = NULL;
- priv->cached_fw = NULL;
-#endif
-
- /* Register PM notifiers */
- orinoco_register_pm_notifier(priv);
-
- return priv;
-}
-EXPORT_SYMBOL(alloc_orinocodev);
-
-/* We can only support a single interface. We provide a separate
- * function to set it up to distinguish between hardware
- * initialisation and interface setup.
- *
- * The base_addr and irq parameters are passed on to netdev for use
- * with SIOCGIFMAP.
- */
-int orinoco_if_add(struct orinoco_private *priv,
- unsigned long base_addr,
- unsigned int irq,
- const struct net_device_ops *ops)
-{
- struct wiphy *wiphy = priv_to_wiphy(priv);
- struct wireless_dev *wdev;
- struct net_device *dev;
- int ret;
-
- dev = alloc_etherdev(sizeof(struct wireless_dev));
-
- if (!dev)
- return -ENOMEM;
-
- /* Initialise wireless_dev */
- wdev = netdev_priv(dev);
- wdev->wiphy = wiphy;
- wdev->iftype = NL80211_IFTYPE_STATION;
-
- /* Setup / override net_device fields */
- dev->ieee80211_ptr = wdev;
- dev->watchdog_timeo = HZ; /* 1 second timeout */
- dev->wireless_handlers = &orinoco_handler_def;
-#ifdef WIRELESS_SPY
- dev->wireless_data = &priv->wireless_data;
-#endif
- /* Default to standard ops if not set */
- if (ops)
- dev->netdev_ops = ops;
- else
- dev->netdev_ops = &orinoco_netdev_ops;
-
- /* we use the default eth_mac_addr for setting the MAC addr */
-
- /* Reserve space in skb for the SNAP header */
- dev->needed_headroom = ENCAPS_OVERHEAD;
-
- netif_carrier_off(dev);
-
- memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN);
-
- dev->base_addr = base_addr;
- dev->irq = irq;
-
- SET_NETDEV_DEV(dev, priv->dev);
- ret = register_netdev(dev);
- if (ret)
- goto fail;
-
- priv->ndev = dev;
-
- /* Report what we've done */
- dev_dbg(priv->dev, "Registerred interface %s.\n", dev->name);
-
- return 0;
-
- fail:
- free_netdev(dev);
- return ret;
-}
-EXPORT_SYMBOL(orinoco_if_add);
-
-void orinoco_if_del(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
-
- unregister_netdev(dev);
- free_netdev(dev);
-}
-EXPORT_SYMBOL(orinoco_if_del);
-
-void free_orinocodev(struct orinoco_private *priv)
-{
- struct wiphy *wiphy = priv_to_wiphy(priv);
- struct orinoco_rx_data *rx_data, *temp;
- struct orinoco_scan_data *sd, *sdtemp;
-
- /* If the tasklet is scheduled when we call tasklet_kill it
- * will run one final time. However the tasklet will only
- * drain priv->rx_list if the hw is still available. */
- tasklet_kill(&priv->rx_tasklet);
-
- /* Explicitly drain priv->rx_list */
- list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
- list_del(&rx_data->list);
-
- dev_kfree_skb(rx_data->skb);
- kfree(rx_data->desc);
- kfree(rx_data);
- }
-
- cancel_work_sync(&priv->process_scan);
- /* Explicitly drain priv->scan_list */
- list_for_each_entry_safe(sd, sdtemp, &priv->scan_list, list) {
- list_del(&sd->list);
-
- if (sd->len > 0)
- kfree(sd->buf);
- kfree(sd);
- }
-
- orinoco_unregister_pm_notifier(priv);
- orinoco_uncache_fw(priv);
-
- priv->wpa_ie_len = 0;
- kfree(priv->wpa_ie);
- orinoco_mic_free(priv);
- wiphy_free(wiphy);
-}
-EXPORT_SYMBOL(free_orinocodev);
-
-int orinoco_up(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- unsigned long flags;
- int err;
-
- priv->hw.ops->lock_irqsave(&priv->lock, &flags);
-
- err = orinoco_reinit_firmware(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
- dev->name, err);
- goto exit;
- }
-
- netif_device_attach(dev);
- priv->hw_unavailable--;
-
- if (priv->open && !priv->hw_unavailable) {
- err = __orinoco_up(priv);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card\n",
- dev->name, err);
- }
-
-exit:
- priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-
- return 0;
-}
-EXPORT_SYMBOL(orinoco_up);
-
-void orinoco_down(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- unsigned long flags;
- int err;
-
- priv->hw.ops->lock_irqsave(&priv->lock, &flags);
- err = __orinoco_down(priv);
- if (err)
- printk(KERN_WARNING "%s: Error %d downing interface\n",
- dev->name, err);
-
- netif_device_detach(dev);
- priv->hw_unavailable++;
- priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-}
-EXPORT_SYMBOL(orinoco_down);
-
-/********************************************************************/
-/* Module initialization */
-/********************************************************************/
-
-/* Can't be declared "const" or the whole __initdata section will
- * become const */
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (David Gibson <hermes@gibson.dropbear.id.au>, "
- "Pavel Roskin <proski@gnu.org>, et al)";
-
-static int __init init_orinoco(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return 0;
-}
-
-static void __exit exit_orinoco(void)
-{
-}
-
-module_init(init_orinoco);
-module_exit(exit_orinoco);