diff options
Diffstat (limited to 'drivers/net/wireless/ti/wl18xx/main.c')
| -rw-r--r-- | drivers/net/wireless/ti/wl18xx/main.c | 41 |
1 files changed, 27 insertions, 14 deletions
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index be21289c3..3f451467f 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -137,8 +137,8 @@ static const u8 wl18xx_rate_to_idx_5ghz[] = { }; static const u8 *wl18xx_band_rate_to_idx[] = { - [IEEE80211_BAND_2GHZ] = wl18xx_rate_to_idx_2ghz, - [IEEE80211_BAND_5GHZ] = wl18xx_rate_to_idx_5ghz + [NL80211_BAND_2GHZ] = wl18xx_rate_to_idx_2ghz, + [NL80211_BAND_5GHZ] = wl18xx_rate_to_idx_5ghz }; enum wl18xx_hw_rates { @@ -1214,6 +1214,10 @@ static void wl18xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status, int_fw_status->counters.tx_voice_released_blks; fw_status->counters.tx_last_rate = int_fw_status->counters.tx_last_rate; + fw_status->counters.tx_last_rate_mbps = + int_fw_status->counters.tx_last_rate_mbps; + fw_status->counters.hlid = + int_fw_status->counters.hlid; fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr); @@ -1302,12 +1306,12 @@ static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl, wl1271_debug(DEBUG_ACX, "using wide channel rate mask"); /* sanity check - we don't support this */ - if (WARN_ON(wlvif->band != IEEE80211_BAND_5GHZ)) + if (WARN_ON(wlvif->band != NL80211_BAND_5GHZ)) return 0; return CONF_TX_RATE_USE_WIDE_CHAN; } else if (wl18xx_is_mimo_supported(wl) && - wlvif->band == IEEE80211_BAND_2GHZ) { + wlvif->band == NL80211_BAND_2GHZ) { wl1271_debug(DEBUG_ACX, "using MIMO rate mask"); /* * we don't care about HT channel here - if a peer doesn't @@ -1821,9 +1825,12 @@ static const struct ieee80211_iface_limit wl18xx_iface_limits[] = { }, { .max = 1, - .types = BIT(NL80211_IFTYPE_AP) | - BIT(NL80211_IFTYPE_P2P_GO) | - BIT(NL80211_IFTYPE_P2P_CLIENT), + .types = BIT(NL80211_IFTYPE_AP) + | BIT(NL80211_IFTYPE_P2P_GO) + | BIT(NL80211_IFTYPE_P2P_CLIENT) +#ifdef CONFIG_MAC80211_MESH + | BIT(NL80211_IFTYPE_MESH_POINT) +#endif }, { .max = 1, @@ -1836,6 +1843,12 @@ static const struct ieee80211_iface_limit wl18xx_iface_ap_limits[] = { .max = 2, .types = BIT(NL80211_IFTYPE_AP), }, +#ifdef CONFIG_MAC80211_MESH + { + .max = 1, + .types = BIT(NL80211_IFTYPE_MESH_POINT), + }, +#endif { .max = 1, .types = BIT(NL80211_IFTYPE_P2P_DEVICE), @@ -1996,24 +2009,24 @@ static int wl18xx_setup(struct wl1271 *wl) * siso40. */ if (wl18xx_is_mimo_supported(wl)) - wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, + wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, &wl18xx_mimo_ht_cap_2ghz); else - wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, + wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, &wl18xx_siso40_ht_cap_2ghz); /* 5Ghz is always wide */ - wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, + wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, &wl18xx_siso40_ht_cap_5ghz); } else if (priv->conf.ht.mode == HT_MODE_WIDE) { - wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, + wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, &wl18xx_siso40_ht_cap_2ghz); - wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, + wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, &wl18xx_siso40_ht_cap_5ghz); } else if (priv->conf.ht.mode == HT_MODE_SISO20) { - wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, + wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, &wl18xx_siso20_ht_cap); - wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, + wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, &wl18xx_siso20_ht_cap); } |