summaryrefslogtreecommitdiff
path: root/drivers/pci/host/pci-thunder-pem.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/host/pci-thunder-pem.c')
-rw-r--r--drivers/pci/host/pci-thunder-pem.c134
1 files changed, 77 insertions, 57 deletions
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index cabb92a51..9b8ab94f3 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -20,34 +20,22 @@
#include <linux/of_pci.h>
#include <linux/platform_device.h>
-#include "pci-host-common.h"
+#include "../ecam.h"
#define PEM_CFG_WR 0x28
#define PEM_CFG_RD 0x30
struct thunder_pem_pci {
- struct gen_pci gen_pci;
u32 ea_entry[3];
void __iomem *pem_reg_base;
};
-static void __iomem *thunder_pem_map_bus(struct pci_bus *bus,
- unsigned int devfn, int where)
-{
- struct gen_pci *pci = bus->sysdata;
- resource_size_t idx = bus->number - pci->cfg.bus_range->start;
-
- return pci->cfg.win[idx] + ((devfn << 16) | where);
-}
-
static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
u64 read_val;
- struct thunder_pem_pci *pem_pci;
- struct gen_pci *pci = bus->sysdata;
-
- pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci);
+ struct pci_config_window *cfg = bus->sysdata;
+ struct thunder_pem_pci *pem_pci = (struct thunder_pem_pci *)cfg->priv;
if (devfn != 0 || where >= 2048) {
*val = ~0;
@@ -132,17 +120,17 @@ static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn,
static int thunder_pem_config_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
- struct gen_pci *pci = bus->sysdata;
+ struct pci_config_window *cfg = bus->sysdata;
- if (bus->number < pci->cfg.bus_range->start ||
- bus->number > pci->cfg.bus_range->end)
+ if (bus->number < cfg->busr.start ||
+ bus->number > cfg->busr.end)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* The first device on the bus is the PEM PCIe bridge.
* Special case its config access.
*/
- if (bus->number == pci->cfg.bus_range->start)
+ if (bus->number == cfg->busr.start)
return thunder_pem_bridge_read(bus, devfn, where, size, val);
return pci_generic_config_read(bus, devfn, where, size, val);
@@ -153,11 +141,11 @@ static int thunder_pem_config_read(struct pci_bus *bus, unsigned int devfn,
* reserved bits, this makes the code simpler and is OK as the bits
* are not affected by writing zeros to them.
*/
-static u32 thunder_pem_bridge_w1c_bits(int where)
+static u32 thunder_pem_bridge_w1c_bits(u64 where_aligned)
{
u32 w1c_bits = 0;
- switch (where & ~3) {
+ switch (where_aligned) {
case 0x04: /* Command/Status */
case 0x1c: /* Base and I/O Limit/Secondary Status */
w1c_bits = 0xff000000;
@@ -184,15 +172,36 @@ static u32 thunder_pem_bridge_w1c_bits(int where)
return w1c_bits;
}
+/* Some bits must be written to one so they appear to be read-only. */
+static u32 thunder_pem_bridge_w1_bits(u64 where_aligned)
+{
+ u32 w1_bits;
+
+ switch (where_aligned) {
+ case 0x1c: /* I/O Base / I/O Limit, Secondary Status */
+ /* Force 32-bit I/O addressing. */
+ w1_bits = 0x0101;
+ break;
+ case 0x24: /* Prefetchable Memory Base / Prefetchable Memory Limit */
+ /* Force 64-bit addressing */
+ w1_bits = 0x00010001;
+ break;
+ default:
+ w1_bits = 0;
+ break;
+ }
+ return w1_bits;
+}
+
static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
- struct gen_pci *pci = bus->sysdata;
- struct thunder_pem_pci *pem_pci;
+ struct pci_config_window *cfg = bus->sysdata;
+ struct thunder_pem_pci *pem_pci = (struct thunder_pem_pci *)cfg->priv;
u64 write_val, read_val;
+ u64 where_aligned = where & ~3ull;
u32 mask = 0;
- pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci);
if (devfn != 0 || where >= 2048)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -205,8 +214,7 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn,
*/
switch (size) {
case 1:
- read_val = where & ~3ull;
- writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+ writeq(where_aligned, pem_pci->pem_reg_base + PEM_CFG_RD);
read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
read_val >>= 32;
mask = ~(0xff << (8 * (where & 3)));
@@ -215,8 +223,7 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn,
val |= (u32)read_val;
break;
case 2:
- read_val = where & ~3ull;
- writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+ writeq(where_aligned, pem_pci->pem_reg_base + PEM_CFG_RD);
read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
read_val >>= 32;
mask = ~(0xffff << (8 * (where & 3)));
@@ -244,11 +251,17 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn,
}
/*
+ * Some bits must be read-only with value of one. Since the
+ * access method allows these to be cleared if a zero is
+ * written, force them to one before writing.
+ */
+ val |= thunder_pem_bridge_w1_bits(where_aligned);
+
+ /*
* Low order bits are the config address, the high order 32
* bits are the data to be written.
*/
- write_val = where & ~3ull;
- write_val |= (((u64)val) << 32);
+ write_val = (((u64)val) << 32) | where_aligned;
writeq(write_val, pem_pci->pem_reg_base + PEM_CFG_WR);
return PCIBIOS_SUCCESSFUL;
}
@@ -256,53 +269,38 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn,
static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
- struct gen_pci *pci = bus->sysdata;
+ struct pci_config_window *cfg = bus->sysdata;
- if (bus->number < pci->cfg.bus_range->start ||
- bus->number > pci->cfg.bus_range->end)
+ if (bus->number < cfg->busr.start ||
+ bus->number > cfg->busr.end)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* The first device on the bus is the PEM PCIe bridge.
* Special case its config access.
*/
- if (bus->number == pci->cfg.bus_range->start)
+ if (bus->number == cfg->busr.start)
return thunder_pem_bridge_write(bus, devfn, where, size, val);
return pci_generic_config_write(bus, devfn, where, size, val);
}
-static struct gen_pci_cfg_bus_ops thunder_pem_bus_ops = {
- .bus_shift = 24,
- .ops = {
- .map_bus = thunder_pem_map_bus,
- .read = thunder_pem_config_read,
- .write = thunder_pem_config_write,
- }
-};
-
-static const struct of_device_id thunder_pem_of_match[] = {
- { .compatible = "cavium,pci-host-thunder-pem",
- .data = &thunder_pem_bus_ops },
-
- { },
-};
-MODULE_DEVICE_TABLE(of, thunder_pem_of_match);
-
-static int thunder_pem_probe(struct platform_device *pdev)
+static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg)
{
- struct device *dev = &pdev->dev;
- const struct of_device_id *of_id;
resource_size_t bar4_start;
struct resource *res_pem;
struct thunder_pem_pci *pem_pci;
+ struct platform_device *pdev;
+
+ /* Only OF support for now */
+ if (!dev->of_node)
+ return -EINVAL;
pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL);
if (!pem_pci)
return -ENOMEM;
- of_id = of_match_node(thunder_pem_of_match, dev->of_node);
- pem_pci->gen_pci.cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data;
+ pdev = to_platform_device(dev);
/*
* The second register range is the PEM bridge to the PCIe
@@ -330,7 +328,29 @@ static int thunder_pem_probe(struct platform_device *pdev)
pem_pci->ea_entry[1] = (u32)(res_pem->end - bar4_start) & ~3u;
pem_pci->ea_entry[2] = (u32)(bar4_start >> 32);
- return pci_host_common_probe(pdev, &pem_pci->gen_pci);
+ cfg->priv = pem_pci;
+ return 0;
+}
+
+static struct pci_ecam_ops pci_thunder_pem_ops = {
+ .bus_shift = 24,
+ .init = thunder_pem_init,
+ .pci_ops = {
+ .map_bus = pci_ecam_map_bus,
+ .read = thunder_pem_config_read,
+ .write = thunder_pem_config_write,
+ }
+};
+
+static const struct of_device_id thunder_pem_of_match[] = {
+ { .compatible = "cavium,pci-host-thunder-pem" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, thunder_pem_of_match);
+
+static int thunder_pem_probe(struct platform_device *pdev)
+{
+ return pci_host_common_probe(pdev, &pci_thunder_pem_ops);
}
static struct platform_driver thunder_pem_driver = {