diff options
Diffstat (limited to 'drivers/usb/host/ehci-pmcmsp.c')
-rw-r--r-- | drivers/usb/host/ehci-pmcmsp.c | 329 |
1 files changed, 329 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c new file mode 100644 index 000000000..342816a7f --- /dev/null +++ b/drivers/usb/host/ehci-pmcmsp.c @@ -0,0 +1,329 @@ +/* + * PMC MSP EHCI (Host Controller Driver) for USB. + * + * (C) Copyright 2006-2010 PMC-Sierra Inc + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +/* includes */ +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/usb.h> +#include <msp_usb.h> + +/* stream disable*/ +#define USB_CTRL_MODE_STREAM_DISABLE 0x10 + +/* threshold */ +#define USB_CTRL_FIFO_THRESH 0x00300000 + +/* register offset for usb_mode */ +#define USB_EHCI_REG_USB_MODE 0x68 + +/* register offset for usb fifo */ +#define USB_EHCI_REG_USB_FIFO 0x24 + +/* register offset for usb status */ +#define USB_EHCI_REG_USB_STATUS 0x44 + +/* serial/parallel transceiver */ +#define USB_EHCI_REG_BIT_STAT_STS (1<<29) + +/* TWI USB0 host device pin */ +#define MSP_PIN_USB0_HOST_DEV 49 + +/* TWI USB1 host device pin */ +#define MSP_PIN_USB1_HOST_DEV 50 + + +static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci) +{ + u8 *base; + u8 *statreg; + u8 *fiforeg; + u32 val; + struct ehci_regs *reg_base = ehci->regs; + + /* get register base */ + base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE; + statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS; + fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO; + + /* Disable controller mode stream */ + val = ehci_readl(ehci, (u32 *)base); + ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE), + (u32 *)base); + + /* clear STS to select parallel transceiver interface */ + val = ehci_readl(ehci, (u32 *)statreg); + val = val & ~USB_EHCI_REG_BIT_STAT_STS; + ehci_writel(ehci, val, (u32 *)statreg); + + /* write to set the proper fifo threshold */ + ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg); + + /* set TWI GPIO USB_HOST_DEV pin high */ + gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1); +} + +/* called during probe() after chip reset completes */ +static int ehci_msp_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; + + ehci->caps = hcd->regs; + hcd->has_tt = 1; + + retval = ehci_setup(hcd); + if (retval) + return retval; + + usb_hcd_tdi_set_mode(ehci); + + return retval; +} + + +/* configure so an HC device and id are always provided + * always called with process context; sleeping is OK + */ + +static int usb_hcd_msp_map_regs(struct mspusb_device *dev) +{ + struct resource *res; + struct platform_device *pdev = &dev->dev; + u32 res_len; + int retval; + + /* MAB register space */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res == NULL) + return -ENOMEM; + res_len = resource_size(res); + if (!request_mem_region(res->start, res_len, "mab regs")) + return -EBUSY; + + dev->mab_regs = ioremap_nocache(res->start, res_len); + if (dev->mab_regs == NULL) { + retval = -ENOMEM; + goto err1; + } + + /* MSP USB register space */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + if (res == NULL) { + retval = -ENOMEM; + goto err2; + } + res_len = resource_size(res); + if (!request_mem_region(res->start, res_len, "usbid regs")) { + retval = -EBUSY; + goto err2; + } + dev->usbid_regs = ioremap_nocache(res->start, res_len); + if (dev->usbid_regs == NULL) { + retval = -ENOMEM; + goto err3; + } + + return 0; +err3: + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + res_len = resource_size(res); + release_mem_region(res->start, res_len); +err2: + iounmap(dev->mab_regs); +err1: + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + res_len = resource_size(res); + release_mem_region(res->start, res_len); + dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n"); + return retval; +} + +/** + * usb_hcd_msp_probe - initialize PMC MSP-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + */ +int usb_hcd_msp_probe(const struct hc_driver *driver, + struct platform_device *dev) +{ + int retval; + struct usb_hcd *hcd; + struct resource *res; + struct ehci_hcd *ehci ; + + hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp"); + if (!hcd) + return -ENOMEM; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (res == NULL) { + pr_debug("No IOMEM resource info for %s.\n", dev->name); + retval = -ENOMEM; + goto err1; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) { + retval = -EBUSY; + goto err1; + } + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + pr_debug("ioremap failed"); + retval = -ENOMEM; + goto err2; + } + + res = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name); + retval = -ENOMEM; + goto err3; + } + + /* Map non-EHCI register spaces */ + retval = usb_hcd_msp_map_regs(to_mspusb_device(dev)); + if (retval != 0) + goto err3; + + ehci = hcd_to_ehci(hcd); + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; + + + retval = usb_add_hcd(hcd, res->start, IRQF_SHARED); + if (retval == 0) { + device_wakeup_enable(hcd->self.controller); + return 0; + } + + usb_remove_hcd(hcd); +err3: + iounmap(hcd->regs); +err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err1: + usb_put_hcd(hcd); + + return retval; +} + + + +/** + * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_msp_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * + * may be called without controller electrically present + * may be called with controller, bus, and devices active + */ +void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev) +{ + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +static const struct hc_driver ehci_msp_hc_driver = { + .description = hcd_name, + .product_desc = "PMC MSP EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + + /* + * basic lifecycle operations + */ + .reset = ehci_msp_setup, + .shutdown = ehci_shutdown, + .start = ehci_run, + .stop = ehci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_hcd_msp_drv_probe(struct platform_device *pdev) +{ + int ret; + + pr_debug("In ehci_hcd_msp_drv_probe"); + + if (usb_disabled()) + return -ENODEV; + + gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO"); + + ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev); + + return ret; +} + +static int ehci_hcd_msp_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_hcd_msp_remove(hcd, pdev); + + /* free TWI GPIO USB_HOST_DEV pin */ + gpio_free(MSP_PIN_USB0_HOST_DEV); + + return 0; +} + +MODULE_ALIAS("pmcmsp-ehci"); + +static struct platform_driver ehci_hcd_msp_driver = { + .probe = ehci_hcd_msp_drv_probe, + .remove = ehci_hcd_msp_drv_remove, + .driver = { + .name = "pmcmsp-ehci", + }, +}; |