summaryrefslogtreecommitdiff
path: root/drivers/usb/storage
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r--drivers/usb/storage/Kconfig214
-rw-r--r--drivers/usb/storage/Makefile44
-rw-r--r--drivers/usb/storage/alauda.c1269
-rw-r--r--drivers/usb/storage/cypress_atacb.c289
-rw-r--r--drivers/usb/storage/datafab.c758
-rw-r--r--drivers/usb/storage/debug.c194
-rw-r--r--drivers/usb/storage/debug.h71
-rw-r--r--drivers/usb/storage/ene_ub6250.c2415
-rw-r--r--drivers/usb/storage/freecom.c560
-rw-r--r--drivers/usb/storage/initializers.c105
-rw-r--r--drivers/usb/storage/initializers.h50
-rw-r--r--drivers/usb/storage/isd200.c1572
-rw-r--r--drivers/usb/storage/jumpshot.c684
-rw-r--r--drivers/usb/storage/karma.c236
-rw-r--r--drivers/usb/storage/onetouch.c317
-rw-r--r--drivers/usb/storage/option_ms.c171
-rw-r--r--drivers/usb/storage/option_ms.h4
-rw-r--r--drivers/usb/storage/protocol.c193
-rw-r--r--drivers/usb/storage/protocol.h57
-rw-r--r--drivers/usb/storage/realtek_cr.c1073
-rw-r--r--drivers/usb/storage/scsiglue.c602
-rw-r--r--drivers/usb/storage/scsiglue.h48
-rw-r--r--drivers/usb/storage/sddr09.c1782
-rw-r--r--drivers/usb/storage/sddr55.c1006
-rw-r--r--drivers/usb/storage/shuttle_usbat.c1874
-rw-r--r--drivers/usb/storage/sierra_ms.c199
-rw-r--r--drivers/usb/storage/sierra_ms.h4
-rw-r--r--drivers/usb/storage/transport.c1385
-rw-r--r--drivers/usb/storage/transport.h103
-rw-r--r--drivers/usb/storage/uas-detect.h143
-rw-r--r--drivers/usb/storage/uas.c1154
-rw-r--r--drivers/usb/storage/unusual_alauda.h31
-rw-r--r--drivers/usb/storage/unusual_cypress.h39
-rw-r--r--drivers/usb/storage/unusual_datafab.h98
-rw-r--r--drivers/usb/storage/unusual_devs.h2215
-rw-r--r--drivers/usb/storage/unusual_ene_ub6250.h26
-rw-r--r--drivers/usb/storage/unusual_freecom.h26
-rw-r--r--drivers/usb/storage/unusual_isd200.h57
-rw-r--r--drivers/usb/storage/unusual_jumpshot.h27
-rw-r--r--drivers/usb/storage/unusual_karma.h26
-rw-r--r--drivers/usb/storage/unusual_onetouch.h36
-rw-r--r--drivers/usb/storage/unusual_realtek.h41
-rw-r--r--drivers/usb/storage/unusual_sddr09.h56
-rw-r--r--drivers/usb/storage/unusual_sddr55.h44
-rw-r--r--drivers/usb/storage/unusual_uas.h163
-rw-r--r--drivers/usb/storage/unusual_usbat.h43
-rw-r--r--drivers/usb/storage/usb.c1140
-rw-r--r--drivers/usb/storage/usb.h207
-rw-r--r--drivers/usb/storage/usual-tables.c123
49 files changed, 22974 insertions, 0 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
new file mode 100644
index 000000000..ec84758f0
--- /dev/null
+++ b/drivers/usb/storage/Kconfig
@@ -0,0 +1,214 @@
+#
+# USB Storage driver configuration
+#
+
+comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
+comment "also be needed; see USB_STORAGE Help for more info"
+
+config USB_STORAGE
+ tristate "USB Mass Storage support"
+ depends on SCSI
+ ---help---
+ Say Y here if you want to connect USB mass storage devices to your
+ computer's USB port. This is the driver you need for USB
+ floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
+ USB flash devices, and memory sticks, along with
+ similar devices. This driver may also be used for some cameras
+ and card readers.
+
+ This option depends on 'SCSI' support being enabled, but you
+ probably also need 'SCSI device support: SCSI disk support'
+ (BLK_DEV_SD) for most USB storage devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usb-storage.
+
+config USB_STORAGE_DEBUG
+ bool "USB Mass Storage verbose debug"
+ depends on USB_STORAGE
+ help
+ Say Y here in order to have the USB Mass Storage code generate
+ verbose debugging messages.
+
+config USB_STORAGE_REALTEK
+ tristate "Realtek Card Reader support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the power-saving function
+ for Realtek RTS51xx USB card readers.
+
+ If this driver is compiled as a module, it will be named ums-realtek.
+
+config REALTEK_AUTOPM
+ bool "Realtek Card Reader autosuspend support"
+ depends on USB_STORAGE_REALTEK && PM
+ default y
+
+config USB_STORAGE_DATAFAB
+ tristate "Datafab Compact Flash Reader support"
+ depends on USB_STORAGE
+ help
+ Support for certain Datafab CompactFlash readers.
+ Datafab has a web page at <http://www.datafab.com/>.
+
+ If this driver is compiled as a module, it will be named ums-datafab.
+
+config USB_STORAGE_FREECOM
+ tristate "Freecom USB/ATAPI Bridge support"
+ depends on USB_STORAGE
+ help
+ Support for the Freecom USB to IDE/ATAPI adaptor.
+ Freecom has a web page at <http://www.freecom.de/>.
+
+ If this driver is compiled as a module, it will be named ums-freecom.
+
+config USB_STORAGE_ISD200
+ tristate "ISD-200 USB/ATA Bridge support"
+ depends on USB_STORAGE
+ ---help---
+ Say Y here if you want to use USB Mass Store devices based
+ on the In-Systems Design ISD-200 USB/ATA bridge.
+
+ Some of the products that use this chip are:
+
+ - Archos Jukebox 6000
+ - ISD SmartCable for Storage
+ - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
+ - Sony CRX10U CD-R/RW drive
+ - CyQ've CQ8060A CDRW drive
+ - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
+
+ If this driver is compiled as a module, it will be named ums-isd200.
+
+config USB_STORAGE_USBAT
+ tristate "USBAT/USBAT02-based storage support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support storage devices
+ based on the SCM/Shuttle USBAT/USBAT02 processors.
+
+ Devices reported to work with this driver include:
+ - CompactFlash reader included with Kodak DC3800 camera
+ - Dane-Elec Zmate CompactFlash reader
+ - Delkin Efilm reader2
+ - HP 8200e/8210e/8230e CD-Writer Plus drives
+ - I-JAM JS-50U
+ - Jessops CompactFlash JESDCFRU BLACK
+ - Kingston Technology PCREAD-USB/CF
+ - Maxell UA4 CompactFlash reader
+ - Memorex UCF-100
+ - Microtech ZiO! ICS-45 CF2
+ - RCA LYRA MP3 portable
+ - Sandisk ImageMate SDDR-05b
+
+ If this driver is compiled as a module, it will be named ums-usbat.
+
+config USB_STORAGE_SDDR09
+ tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Sandisk SDDR-09
+ SmartMedia reader in the USB Mass Storage driver.
+ Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
+
+ If this driver is compiled as a module, it will be named ums-sddr09.
+
+config USB_STORAGE_SDDR55
+ tristate "SanDisk SDDR-55 SmartMedia support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Sandisk SDDR-55
+ SmartMedia reader in the USB Mass Storage driver.
+
+ If this driver is compiled as a module, it will be named ums-sddr55.
+
+config USB_STORAGE_JUMPSHOT
+ tristate "Lexar Jumpshot Compact Flash Reader"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Lexar Jumpshot
+ USB CompactFlash reader.
+
+ If this driver is compiled as a module, it will be named ums-jumpshot.
+
+config USB_STORAGE_ALAUDA
+ tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Olympus MAUSB-10
+ and Fujifilm DPC-R1 USB Card reader/writer devices.
+
+ These devices are based on the Alauda chip and support both
+ XD and SmartMedia cards.
+
+ If this driver is compiled as a module, it will be named ums-alauda.
+
+config USB_STORAGE_ONETOUCH
+ tristate "Support OneTouch Button on Maxtor Hard Drives"
+ depends on USB_STORAGE
+ depends on INPUT=y || INPUT=USB_STORAGE
+ help
+ Say Y here to include additional code to support the Maxtor OneTouch
+ USB hard drive's onetouch button.
+
+ This code registers the button on the front of Maxtor OneTouch USB
+ hard drive's as an input device. An action can be associated with
+ this input in any keybinding software. (e.g. gnome's keyboard short-
+ cuts)
+
+ If this driver is compiled as a module, it will be named ums-onetouch.
+
+config USB_STORAGE_KARMA
+ tristate "Support for Rio Karma music player"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Rio Karma
+ USB interface.
+
+ This code places the Rio Karma into mass storage mode, enabling
+ it to be mounted as an ordinary filesystem. Performing an eject
+ on the resulting scsi device node returns the Karma to normal
+ operation.
+
+ If this driver is compiled as a module, it will be named ums-karma.
+
+config USB_STORAGE_CYPRESS_ATACB
+ tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
+ depends on USB_STORAGE
+ ---help---
+ Say Y here if you want to use SAT (ata pass through) on devices based
+ on the Cypress USB/ATA bridge supporting ATACB. This will allow you
+ to use tools to tune and monitor your drive (like hdparm or smartctl).
+
+ If you say no here your device will still work with the standard usb
+ mass storage class.
+
+ If this driver is compiled as a module, it will be named ums-cypress.
+
+config USB_STORAGE_ENE_UB6250
+ tristate "USB ENE card reader support"
+ depends on SCSI
+ depends on USB_STORAGE
+ ---help---
+ Say Y here if you wish to control a ENE SD/MS Card reader.
+ Note that this driver does not support SM cards.
+
+ This option depends on 'SCSI' support being enabled, but you
+ probably also need 'SCSI device support: SCSI disk support'
+ (BLK_DEV_SD) for most USB storage devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ums-eneub6250.
+
+config USB_UAS
+ tristate "USB Attached SCSI"
+ depends on SCSI && USB_STORAGE
+ help
+ The USB Attached SCSI protocol is supported by some USB
+ storage devices. It permits higher performance by supporting
+ multiple outstanding commands.
+
+ If you don't know whether you have a UAS device, it is safe to
+ say 'Y' or 'M' here and the kernel will use the right driver.
+
+ If you compile this driver as a module, it will be named uas.
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
new file mode 100644
index 000000000..4cd55481b
--- /dev/null
+++ b/drivers/usb/storage/Makefile
@@ -0,0 +1,44 @@
+#
+# Makefile for the USB Mass Storage device drivers.
+#
+# 15 Aug 2000, Christoph Hellwig <hch@infradead.org>
+# Rewritten to use lists instead of if-statements.
+#
+
+ccflags-y := -Idrivers/scsi
+
+obj-$(CONFIG_USB_UAS) += uas.o
+obj-$(CONFIG_USB_STORAGE) += usb-storage.o
+
+usb-storage-y := scsiglue.o protocol.o transport.o usb.o
+usb-storage-y += initializers.o sierra_ms.o option_ms.o
+usb-storage-y += usual-tables.o
+usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
+
+obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
+obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
+obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o
+obj-$(CONFIG_USB_STORAGE_ENE_UB6250) += ums-eneub6250.o
+obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o
+obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o
+obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += ums-jumpshot.o
+obj-$(CONFIG_USB_STORAGE_KARMA) += ums-karma.o
+obj-$(CONFIG_USB_STORAGE_ONETOUCH) += ums-onetouch.o
+obj-$(CONFIG_USB_STORAGE_REALTEK) += ums-realtek.o
+obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o
+obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o
+obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o
+
+ums-alauda-y := alauda.o
+ums-cypress-y := cypress_atacb.o
+ums-datafab-y := datafab.o
+ums-eneub6250-y := ene_ub6250.o
+ums-freecom-y := freecom.o
+ums-isd200-y := isd200.o
+ums-jumpshot-y := jumpshot.o
+ums-karma-y := karma.o
+ums-onetouch-y := onetouch.o
+ums-realtek-y := realtek_cr.o
+ums-sddr09-y := sddr09.o
+ums-sddr55-y := sddr55.o
+ums-usbat-y := shuttle_usbat.o
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
new file mode 100644
index 000000000..4b55ab66a
--- /dev/null
+++ b/drivers/usb/storage/alauda.c
@@ -0,0 +1,1269 @@
+/*
+ * Driver for Alauda-based card readers
+ *
+ * Current development and maintenance by:
+ * (c) 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * The 'Alauda' is a chip manufacturered by RATOC for OEM use.
+ *
+ * Alauda implements a vendor-specific command set to access two media reader
+ * ports (XD, SmartMedia). This driver converts SCSI commands to the commands
+ * which are accepted by these devices.
+ *
+ * The driver was developed through reverse-engineering, with the help of the
+ * sddr09 driver which has many similarities, and with some help from the
+ * (very old) vendor-supplied GPL sma03 driver.
+ *
+ * For protocol info, see http://alauda.sourceforge.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Driver for Alauda-based card readers");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>");
+MODULE_LICENSE("GPL");
+
+/*
+ * Status bytes
+ */
+#define ALAUDA_STATUS_ERROR 0x01
+#define ALAUDA_STATUS_READY 0x40
+
+/*
+ * Control opcodes (for request field)
+ */
+#define ALAUDA_GET_XD_MEDIA_STATUS 0x08
+#define ALAUDA_GET_SM_MEDIA_STATUS 0x98
+#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a
+#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a
+#define ALAUDA_GET_XD_MEDIA_SIG 0x86
+#define ALAUDA_GET_SM_MEDIA_SIG 0x96
+
+/*
+ * Bulk command identity (byte 0)
+ */
+#define ALAUDA_BULK_CMD 0x40
+
+/*
+ * Bulk opcodes (byte 1)
+ */
+#define ALAUDA_BULK_GET_REDU_DATA 0x85
+#define ALAUDA_BULK_READ_BLOCK 0x94
+#define ALAUDA_BULK_ERASE_BLOCK 0xa3
+#define ALAUDA_BULK_WRITE_BLOCK 0xb4
+#define ALAUDA_BULK_GET_STATUS2 0xb7
+#define ALAUDA_BULK_RESET_MEDIA 0xe0
+
+/*
+ * Port to operate on (byte 8)
+ */
+#define ALAUDA_PORT_XD 0x00
+#define ALAUDA_PORT_SM 0x01
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF 0xffff
+#define SPARE 0xfffe
+#define UNUSABLE 0xfffd
+
+struct alauda_media_info {
+ unsigned long capacity; /* total media size in bytes */
+ unsigned int pagesize; /* page size in bytes */
+ unsigned int blocksize; /* number of pages per block */
+ unsigned int uzonesize; /* number of usable blocks per zone */
+ unsigned int zonesize; /* number of blocks per zone */
+ unsigned int blockmask; /* mask to get page from address */
+
+ unsigned char pageshift;
+ unsigned char blockshift;
+ unsigned char zoneshift;
+
+ u16 **lba_to_pba; /* logical to physical block map */
+ u16 **pba_to_lba; /* physical to logical block map */
+};
+
+struct alauda_info {
+ struct alauda_media_info port[2];
+ int wr_ep; /* endpoint to write data out of */
+
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
+
+#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+#define MEDIA_PORT(us) us->srb->device->lun
+#define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)]
+
+#define PBA_LO(pba) ((pba & 0xF) << 5)
+#define PBA_HI(pba) (pba >> 3)
+#define PBA_ZONE(pba) (pba >> 11)
+
+static int init_alauda(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id alauda_usb_ids[] = {
+# include "unusual_alauda.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, alauda_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev alauda_unusual_dev_list[] = {
+# include "unusual_alauda.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/*
+ * Media handling
+ */
+
+struct alauda_card_info {
+ unsigned char id; /* id byte */
+ unsigned char chipshift; /* 1<<cs bytes total capacity */
+ unsigned char pageshift; /* 1<<ps bytes in a page */
+ unsigned char blockshift; /* 1<<bs pages per block */
+ unsigned char zoneshift; /* 1<<zs blocks per zone */
+};
+
+static struct alauda_card_info alauda_card_ids[] = {
+ /* NAND flash */
+ { 0x6e, 20, 8, 4, 8}, /* 1 MB */
+ { 0xe8, 20, 8, 4, 8}, /* 1 MB */
+ { 0xec, 20, 8, 4, 8}, /* 1 MB */
+ { 0x64, 21, 8, 4, 9}, /* 2 MB */
+ { 0xea, 21, 8, 4, 9}, /* 2 MB */
+ { 0x6b, 22, 9, 4, 9}, /* 4 MB */
+ { 0xe3, 22, 9, 4, 9}, /* 4 MB */
+ { 0xe5, 22, 9, 4, 9}, /* 4 MB */
+ { 0xe6, 23, 9, 4, 10}, /* 8 MB */
+ { 0x73, 24, 9, 5, 10}, /* 16 MB */
+ { 0x75, 25, 9, 5, 10}, /* 32 MB */
+ { 0x76, 26, 9, 5, 10}, /* 64 MB */
+ { 0x79, 27, 9, 5, 10}, /* 128 MB */
+ { 0x71, 28, 9, 5, 10}, /* 256 MB */
+
+ /* MASK ROM */
+ { 0x5d, 21, 9, 4, 8}, /* 2 MB */
+ { 0xd5, 22, 9, 4, 9}, /* 4 MB */
+ { 0xd6, 23, 9, 4, 10}, /* 8 MB */
+ { 0x57, 24, 9, 4, 11}, /* 16 MB */
+ { 0x58, 25, 9, 4, 12}, /* 32 MB */
+ { 0,}
+};
+
+static struct alauda_card_info *alauda_card_find_id(unsigned char id)
+{
+ int i;
+
+ for (i = 0; alauda_card_ids[i].id != 0; i++)
+ if (alauda_card_ids[i].id == id)
+ return &(alauda_card_ids[i]);
+ return NULL;
+}
+
+/*
+ * ECC computation.
+ */
+
+static unsigned char parity[256];
+static unsigned char ecc2[256];
+
+static void nand_init_ecc(void)
+{
+ int i, j, a;
+
+ parity[0] = 0;
+ for (i = 1; i < 256; i++)
+ parity[i] = (parity[i&(i-1)] ^ 1);
+
+ for (i = 0; i < 256; i++) {
+ a = 0;
+ for (j = 0; j < 8; j++) {
+ if (i & (1<<j)) {
+ if ((j & 1) == 0)
+ a ^= 0x04;
+ if ((j & 2) == 0)
+ a ^= 0x10;
+ if ((j & 4) == 0)
+ a ^= 0x40;
+ }
+ }
+ ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
+ }
+}
+
+/* compute 3-byte ecc on 256 bytes */
+static void nand_compute_ecc(unsigned char *data, unsigned char *ecc)
+{
+ int i, j, a;
+ unsigned char par = 0, bit, bits[8] = {0};
+
+ /* collect 16 checksum bits */
+ for (i = 0; i < 256; i++) {
+ par ^= data[i];
+ bit = parity[data[i]];
+ for (j = 0; j < 8; j++)
+ if ((i & (1<<j)) == 0)
+ bits[j] ^= bit;
+ }
+
+ /* put 4+4+4 = 12 bits in the ecc */
+ a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
+ ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+ a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
+ ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+ ecc[2] = ecc2[par];
+}
+
+static int nand_compare_ecc(unsigned char *data, unsigned char *ecc)
+{
+ return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
+}
+
+static void nand_store_ecc(unsigned char *data, unsigned char *ecc)
+{
+ memcpy(data, ecc, 3);
+}
+
+/*
+ * Alauda driver
+ */
+
+/*
+ * Forget our PBA <---> LBA mappings for a particular port
+ */
+static void alauda_free_maps (struct alauda_media_info *media_info)
+{
+ unsigned int shift = media_info->zoneshift
+ + media_info->blockshift + media_info->pageshift;
+ unsigned int num_zones = media_info->capacity >> shift;
+ unsigned int i;
+
+ if (media_info->lba_to_pba != NULL)
+ for (i = 0; i < num_zones; i++) {
+ kfree(media_info->lba_to_pba[i]);
+ media_info->lba_to_pba[i] = NULL;
+ }
+
+ if (media_info->pba_to_lba != NULL)
+ for (i = 0; i < num_zones; i++) {
+ kfree(media_info->pba_to_lba[i]);
+ media_info->pba_to_lba[i] = NULL;
+ }
+}
+
+/*
+ * Returns 2 bytes of status data
+ * The first byte describes media status, and second byte describes door status
+ */
+static int alauda_get_media_status(struct us_data *us, unsigned char *data)
+{
+ int rc;
+ unsigned char command;
+
+ if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+ command = ALAUDA_GET_XD_MEDIA_STATUS;
+ else
+ command = ALAUDA_GET_SM_MEDIA_STATUS;
+
+ rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+ command, 0xc0, 0, 1, data, 2);
+
+ usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]);
+
+ return rc;
+}
+
+/*
+ * Clears the "media was changed" bit so that we know when it changes again
+ * in the future.
+ */
+static int alauda_ack_media(struct us_data *us)
+{
+ unsigned char command;
+
+ if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+ command = ALAUDA_ACK_XD_MEDIA_CHANGE;
+ else
+ command = ALAUDA_ACK_SM_MEDIA_CHANGE;
+
+ return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+ command, 0x40, 0, 1, NULL, 0);
+}
+
+/*
+ * Retrieves a 4-byte media signature, which indicates manufacturer, capacity,
+ * and some other details.
+ */
+static int alauda_get_media_signature(struct us_data *us, unsigned char *data)
+{
+ unsigned char command;
+
+ if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+ command = ALAUDA_GET_XD_MEDIA_SIG;
+ else
+ command = ALAUDA_GET_SM_MEDIA_SIG;
+
+ return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+ command, 0xc0, 0, 0, data, 4);
+}
+
+/*
+ * Resets the media status (but not the whole device?)
+ */
+static int alauda_reset_media(struct us_data *us)
+{
+ unsigned char *command = us->iobuf;
+
+ memset(command, 0, 9);
+ command[0] = ALAUDA_BULK_CMD;
+ command[1] = ALAUDA_BULK_RESET_MEDIA;
+ command[8] = MEDIA_PORT(us);
+
+ return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+}
+
+/*
+ * Examines the media and deduces capacity, etc.
+ */
+static int alauda_init_media(struct us_data *us)
+{
+ unsigned char *data = us->iobuf;
+ int ready = 0;
+ struct alauda_card_info *media_info;
+ unsigned int num_zones;
+
+ while (ready == 0) {
+ msleep(20);
+
+ if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (data[0] & 0x10)
+ ready = 1;
+ }
+
+ usb_stor_dbg(us, "We are ready for action!\n");
+
+ if (alauda_ack_media(us) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ msleep(10);
+
+ if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (data[0] != 0x14) {
+ usb_stor_dbg(us, "Media not ready after ack\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "Media signature: %4ph\n", data);
+ media_info = alauda_card_find_id(data[1]);
+ if (media_info == NULL) {
+ pr_warn("alauda_init_media: Unrecognised media signature: %4ph\n",
+ data);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ MEDIA_INFO(us).capacity = 1 << media_info->chipshift;
+ usb_stor_dbg(us, "Found media with capacity: %ldMB\n",
+ MEDIA_INFO(us).capacity >> 20);
+
+ MEDIA_INFO(us).pageshift = media_info->pageshift;
+ MEDIA_INFO(us).blockshift = media_info->blockshift;
+ MEDIA_INFO(us).zoneshift = media_info->zoneshift;
+
+ MEDIA_INFO(us).pagesize = 1 << media_info->pageshift;
+ MEDIA_INFO(us).blocksize = 1 << media_info->blockshift;
+ MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift;
+
+ MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125;
+ MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1;
+
+ num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
+ + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
+ MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+ MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+
+ if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Examines the media status and does the right thing when the media has gone,
+ * appeared, or changed.
+ */
+static int alauda_check_media(struct us_data *us)
+{
+ struct alauda_info *info = (struct alauda_info *) us->extra;
+ unsigned char status[2];
+ int rc;
+
+ rc = alauda_get_media_status(us, status);
+
+ /* Check for no media or door open */
+ if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10)
+ || ((status[1] & 0x01) == 0)) {
+ usb_stor_dbg(us, "No media, or door open\n");
+ alauda_free_maps(&MEDIA_INFO(us));
+ info->sense_key = 0x02;
+ info->sense_asc = 0x3A;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ /* Check for media change */
+ if (status[0] & 0x08) {
+ usb_stor_dbg(us, "Media change detected\n");
+ alauda_free_maps(&MEDIA_INFO(us));
+ alauda_init_media(us);
+
+ info->sense_key = UNIT_ATTENTION;
+ info->sense_asc = 0x28;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Checks the status from the 2nd status register
+ * Returns 3 bytes of status data, only the first is known
+ */
+static int alauda_check_status2(struct us_data *us)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2,
+ 0, 0, 0, 0, 3, 0, MEDIA_PORT(us)
+ };
+ unsigned char data[3];
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, 3, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "%3ph\n", data);
+ if (data[0] & ALAUDA_STATUS_ERROR)
+ return USB_STOR_XFER_ERROR;
+
+ return USB_STOR_XFER_GOOD;
+}
+
+/*
+ * Gets the redundancy data for the first page of a PBA
+ * Returns 16 bytes.
+ */
+static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA,
+ PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us)
+ };
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, 16, NULL);
+}
+
+/*
+ * Finds the first unused PBA in a zone
+ * Returns the absolute PBA of an unused PBA, or 0 if none found.
+ */
+static u16 alauda_find_unused_pba(struct alauda_media_info *info,
+ unsigned int zone)
+{
+ u16 *pba_to_lba = info->pba_to_lba[zone];
+ unsigned int i;
+
+ for (i = 0; i < info->zonesize; i++)
+ if (pba_to_lba[i] == UNDEF)
+ return (zone << info->zoneshift) + i;
+
+ return 0;
+}
+
+/*
+ * Reads the redundancy data for all PBA's in a zone
+ * Produces lba <--> pba mappings
+ */
+static int alauda_read_map(struct us_data *us, unsigned int zone)
+{
+ unsigned char *data = us->iobuf;
+ int result;
+ int i, j;
+ unsigned int zonesize = MEDIA_INFO(us).zonesize;
+ unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+ unsigned int lba_offset, lba_real, blocknum;
+ unsigned int zone_base_lba = zone * uzonesize;
+ unsigned int zone_base_pba = zone * zonesize;
+ u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
+ u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
+ if (lba_to_pba == NULL || pba_to_lba == NULL) {
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto error;
+ }
+
+ usb_stor_dbg(us, "Mapping blocks for zone %d\n", zone);
+
+ /* 1024 PBA's per zone */
+ for (i = 0; i < zonesize; i++)
+ lba_to_pba[i] = pba_to_lba[i] = UNDEF;
+
+ for (i = 0; i < zonesize; i++) {
+ blocknum = zone_base_pba + i;
+
+ result = alauda_get_redu_data(us, blocknum, data);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto error;
+ }
+
+ /* special PBAs have control field 0^16 */
+ for (j = 0; j < 16; j++)
+ if (data[j] != 0)
+ goto nonz;
+ pba_to_lba[i] = UNUSABLE;
+ usb_stor_dbg(us, "PBA %d has no logical mapping\n", blocknum);
+ continue;
+
+ nonz:
+ /* unwritten PBAs have control field FF^16 */
+ for (j = 0; j < 16; j++)
+ if (data[j] != 0xff)
+ goto nonff;
+ continue;
+
+ nonff:
+ /* normal PBAs start with six FFs */
+ if (j < 6) {
+ usb_stor_dbg(us, "PBA %d has no logical mapping: reserved area = %02X%02X%02X%02X data status %02X block status %02X\n",
+ blocknum,
+ data[0], data[1], data[2], data[3],
+ data[4], data[5]);
+ pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ if ((data[6] >> 4) != 0x01) {
+ usb_stor_dbg(us, "PBA %d has invalid address field %02X%02X/%02X%02X\n",
+ blocknum, data[6], data[7],
+ data[11], data[12]);
+ pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ /* check even parity */
+ if (parity[data[6] ^ data[7]]) {
+ printk(KERN_WARNING
+ "alauda_read_map: Bad parity in LBA for block %d"
+ " (%02X %02X)\n", i, data[6], data[7]);
+ pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ lba_offset = short_pack(data[7], data[6]);
+ lba_offset = (lba_offset & 0x07FF) >> 1;
+ lba_real = lba_offset + zone_base_lba;
+
+ /*
+ * Every 1024 physical blocks ("zone"), the LBA numbers
+ * go back to zero, but are within a higher block of LBA's.
+ * Also, there is a maximum of 1000 LBA's per zone.
+ * In other words, in PBA 1024-2047 you will find LBA 0-999
+ * which are really LBA 1000-1999. This allows for 24 bad
+ * or special physical blocks per zone.
+ */
+
+ if (lba_offset >= uzonesize) {
+ printk(KERN_WARNING
+ "alauda_read_map: Bad low LBA %d for block %d\n",
+ lba_real, blocknum);
+ continue;
+ }
+
+ if (lba_to_pba[lba_offset] != UNDEF) {
+ printk(KERN_WARNING
+ "alauda_read_map: "
+ "LBA %d seen for PBA %d and %d\n",
+ lba_real, lba_to_pba[lba_offset], blocknum);
+ continue;
+ }
+
+ pba_to_lba[i] = lba_real;
+ lba_to_pba[lba_offset] = blocknum;
+ continue;
+ }
+
+ MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba;
+ MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba;
+ result = 0;
+ goto out;
+
+error:
+ kfree(lba_to_pba);
+ kfree(pba_to_lba);
+out:
+ return result;
+}
+
+/*
+ * Checks to see whether we have already mapped a certain zone
+ * If we haven't, the map is generated
+ */
+static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone)
+{
+ if (MEDIA_INFO(us).lba_to_pba[zone] == NULL
+ || MEDIA_INFO(us).pba_to_lba[zone] == NULL)
+ alauda_read_map(us, zone);
+}
+
+/*
+ * Erases an entire block
+ */
+static int alauda_erase_block(struct us_data *us, u16 pba)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us)
+ };
+ unsigned char buf[2];
+
+ usb_stor_dbg(us, "Erasing PBA %d\n", pba);
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ buf, 2, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "Erase result: %02X %02X\n", buf[0], buf[1]);
+ return rc;
+}
+
+/*
+ * Reads data from a certain offset page inside a PBA, including interleaved
+ * redundancy data. Returns (pagesize+64)*pages bytes in data.
+ */
+static int alauda_read_block_raw(struct us_data *us, u16 pba,
+ unsigned int page, unsigned int pages, unsigned char *data)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us)
+ };
+
+ usb_stor_dbg(us, "pba %d page %d count %d\n", pba, page, pages);
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL);
+}
+
+/*
+ * Reads data from a certain offset page inside a PBA, excluding redundancy
+ * data. Returns pagesize*pages bytes in data. Note that data must be big enough
+ * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra'
+ * trailing bytes outside this function.
+ */
+static int alauda_read_block(struct us_data *us, u16 pba,
+ unsigned int page, unsigned int pages, unsigned char *data)
+{
+ int i, rc;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+
+ rc = alauda_read_block_raw(us, pba, page, pages, data);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ /* Cut out the redundancy data */
+ for (i = 0; i < pages; i++) {
+ int dest_offset = i * pagesize;
+ int src_offset = i * (pagesize + 64);
+ memmove(data + dest_offset, data + src_offset, pagesize);
+ }
+
+ return rc;
+}
+
+/*
+ * Writes an entire block of data and checks status after write.
+ * Redundancy data must be already included in data. Data should be
+ * (pagesize+64)*blocksize bytes in length.
+ */
+static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data)
+{
+ int rc;
+ struct alauda_info *info = (struct alauda_info *) us->extra;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us)
+ };
+
+ usb_stor_dbg(us, "pba %d\n", pba);
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data,
+ (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize,
+ NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ return alauda_check_status2(us);
+}
+
+/*
+ * Write some data to a specific LBA.
+ */
+static int alauda_write_lba(struct us_data *us, u16 lba,
+ unsigned int page, unsigned int pages,
+ unsigned char *ptr, unsigned char *blockbuffer)
+{
+ u16 pba, lbap, new_pba;
+ unsigned char *bptr, *cptr, *xptr;
+ unsigned char ecc[3];
+ int i, result;
+ unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+ unsigned int zonesize = MEDIA_INFO(us).zonesize;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+ unsigned int blocksize = MEDIA_INFO(us).blocksize;
+ unsigned int lba_offset = lba % uzonesize;
+ unsigned int new_pba_offset;
+ unsigned int zone = lba / uzonesize;
+
+ alauda_ensure_map_for_zone(us, zone);
+
+ pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
+ if (pba == 1) {
+ /* Maybe it is impossible to write to PBA 1.
+ Fake success, but don't do anything. */
+ printk(KERN_WARNING
+ "alauda_write_lba: avoid writing to pba 1\n");
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
+ if (!new_pba) {
+ printk(KERN_WARNING
+ "alauda_write_lba: Out of unused blocks\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* read old contents */
+ if (pba != UNDEF) {
+ result = alauda_read_block_raw(us, pba, 0,
+ blocksize, blockbuffer);
+ if (result != USB_STOR_XFER_GOOD)
+ return result;
+ } else {
+ memset(blockbuffer, 0, blocksize * (pagesize + 64));
+ }
+
+ lbap = (lba_offset << 1) | 0x1000;
+ if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
+ lbap ^= 1;
+
+ /* check old contents and fill lba */
+ for (i = 0; i < blocksize; i++) {
+ bptr = blockbuffer + (i * (pagesize + 64));
+ cptr = bptr + pagesize;
+ nand_compute_ecc(bptr, ecc);
+ if (!nand_compare_ecc(cptr+13, ecc)) {
+ usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n",
+ i, pba);
+ nand_store_ecc(cptr+13, ecc);
+ }
+ nand_compute_ecc(bptr + (pagesize / 2), ecc);
+ if (!nand_compare_ecc(cptr+8, ecc)) {
+ usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n",
+ i, pba);
+ nand_store_ecc(cptr+8, ecc);
+ }
+ cptr[6] = cptr[11] = MSB_of(lbap);
+ cptr[7] = cptr[12] = LSB_of(lbap);
+ }
+
+ /* copy in new stuff and compute ECC */
+ xptr = ptr;
+ for (i = page; i < page+pages; i++) {
+ bptr = blockbuffer + (i * (pagesize + 64));
+ cptr = bptr + pagesize;
+ memcpy(bptr, xptr, pagesize);
+ xptr += pagesize;
+ nand_compute_ecc(bptr, ecc);
+ nand_store_ecc(cptr+13, ecc);
+ nand_compute_ecc(bptr + (pagesize / 2), ecc);
+ nand_store_ecc(cptr+8, ecc);
+ }
+
+ result = alauda_write_block(us, new_pba, blockbuffer);
+ if (result != USB_STOR_XFER_GOOD)
+ return result;
+
+ new_pba_offset = new_pba - (zone * zonesize);
+ MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba;
+ MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba;
+ usb_stor_dbg(us, "Remapped LBA %d to PBA %d\n", lba, new_pba);
+
+ if (pba != UNDEF) {
+ unsigned int pba_offset = pba - (zone * zonesize);
+ result = alauda_erase_block(us, pba);
+ if (result != USB_STOR_XFER_GOOD)
+ return result;
+ MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Read data from a specific sector address
+ */
+static int alauda_read_data(struct us_data *us, unsigned long address,
+ unsigned int sectors)
+{
+ unsigned char *buffer;
+ u16 lba, max_lba;
+ unsigned int page, len, offset;
+ unsigned int blockshift = MEDIA_INFO(us).blockshift;
+ unsigned int pageshift = MEDIA_INFO(us).pageshift;
+ unsigned int blocksize = MEDIA_INFO(us).blocksize;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+ unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+ struct scatterlist *sg;
+ int result;
+
+ /*
+ * Since we only read in one block at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ * We make this buffer big enough to hold temporary redundancy data,
+ * which we use when reading the data blocks.
+ */
+
+ len = min(sectors, blocksize) * (pagesize + 64);
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) {
+ printk(KERN_WARNING "alauda_read_data: Out of memory\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Figure out the initial LBA and page */
+ lba = address >> blockshift;
+ page = (address & MEDIA_INFO(us).blockmask);
+ max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift);
+
+ result = USB_STOR_TRANSPORT_GOOD;
+ offset = 0;
+ sg = NULL;
+
+ while (sectors > 0) {
+ unsigned int zone = lba / uzonesize; /* integer division */
+ unsigned int lba_offset = lba - (zone * uzonesize);
+ unsigned int pages;
+ u16 pba;
+ alauda_ensure_map_for_zone(us, zone);
+
+ /* Not overflowing capacity? */
+ if (lba >= max_lba) {
+ usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
+ lba, max_lba);
+ result = USB_STOR_TRANSPORT_ERROR;
+ break;
+ }
+
+ /* Find number of pages we can read in this block */
+ pages = min(sectors, blocksize - page);
+ len = pages << pageshift;
+
+ /* Find where this lba lives on disk */
+ pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
+
+ if (pba == UNDEF) { /* this lba was never written */
+ usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
+ pages, lba, page);
+
+ /* This is not really an error. It just means
+ that the block has never been written.
+ Instead of returning USB_STOR_TRANSPORT_ERROR
+ it is better to return all zero data. */
+
+ memset(buffer, 0, len);
+ } else {
+ usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n",
+ pages, pba, lba, page);
+
+ result = alauda_read_block(us, pba, page, pages, buffer);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ break;
+ }
+
+ /* Store the data in the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &offset, TO_XFER_BUF);
+
+ page = 0;
+ lba++;
+ sectors -= pages;
+ }
+
+ kfree(buffer);
+ return result;
+}
+
+/*
+ * Write data to a specific sector address
+ */
+static int alauda_write_data(struct us_data *us, unsigned long address,
+ unsigned int sectors)
+{
+ unsigned char *buffer, *blockbuffer;
+ unsigned int page, len, offset;
+ unsigned int blockshift = MEDIA_INFO(us).blockshift;
+ unsigned int pageshift = MEDIA_INFO(us).pageshift;
+ unsigned int blocksize = MEDIA_INFO(us).blocksize;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+ struct scatterlist *sg;
+ u16 lba, max_lba;
+ int result;
+
+ /*
+ * Since we don't write the user data directly to the device,
+ * we have to create a bounce buffer and move the data a piece
+ * at a time between the bounce buffer and the actual transfer buffer.
+ */
+
+ len = min(sectors, blocksize) * pagesize;
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) {
+ printk(KERN_WARNING "alauda_write_data: Out of memory\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /*
+ * We also need a temporary block buffer, where we read in the old data,
+ * overwrite parts with the new data, and manipulate the redundancy data
+ */
+ blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
+ if (blockbuffer == NULL) {
+ printk(KERN_WARNING "alauda_write_data: Out of memory\n");
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Figure out the initial LBA and page */
+ lba = address >> blockshift;
+ page = (address & MEDIA_INFO(us).blockmask);
+ max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift);
+
+ result = USB_STOR_TRANSPORT_GOOD;
+ offset = 0;
+ sg = NULL;
+
+ while (sectors > 0) {
+ /* Write as many sectors as possible in this block */
+ unsigned int pages = min(sectors, blocksize - page);
+ len = pages << pageshift;
+
+ /* Not overflowing capacity? */
+ if (lba >= max_lba) {
+ usb_stor_dbg(us, "Requested lba %u exceeds maximum %u\n",
+ lba, max_lba);
+ result = USB_STOR_TRANSPORT_ERROR;
+ break;
+ }
+
+ /* Get the data from the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &offset, FROM_XFER_BUF);
+
+ result = alauda_write_lba(us, lba, page, pages, buffer,
+ blockbuffer);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ break;
+
+ page = 0;
+ lba++;
+ sectors -= pages;
+ }
+
+ kfree(buffer);
+ kfree(blockbuffer);
+ return result;
+}
+
+/*
+ * Our interface with the rest of the world
+ */
+
+static void alauda_info_destructor(void *extra)
+{
+ struct alauda_info *info = (struct alauda_info *) extra;
+ int port;
+
+ if (!info)
+ return;
+
+ for (port = 0; port < 2; port++) {
+ struct alauda_media_info *media_info = &info->port[port];
+
+ alauda_free_maps(media_info);
+ kfree(media_info->lba_to_pba);
+ kfree(media_info->pba_to_lba);
+ }
+}
+
+/*
+ * Initialize alauda_info struct and find the data-write endpoint
+ */
+static int init_alauda(struct us_data *us)
+{
+ struct alauda_info *info;
+ struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
+ nand_init_ecc();
+
+ us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO);
+ if (!us->extra)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ info = (struct alauda_info *) us->extra;
+ us->extra_destructor = alauda_info_destructor;
+
+ info->wr_ep = usb_sndbulkpipe(us->pusb_dev,
+ altsetting->endpoint[0].desc.bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int rc;
+ struct alauda_info *info = (struct alauda_info *) us->extra;
+ unsigned char *ptr = us->iobuf;
+ static unsigned char inquiry_response[36] = {
+ 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+ };
+
+ if (srb->cmnd[0] == INQUIRY) {
+ usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+ memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+ fill_inquiry_response(us, ptr, 36);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == TEST_UNIT_READY) {
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
+ return alauda_check_media(us);
+ }
+
+ if (srb->cmnd[0] == READ_CAPACITY) {
+ unsigned int num_zones;
+ unsigned long capacity;
+
+ rc = alauda_check_media(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
+ + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
+
+ capacity = num_zones * MEDIA_INFO(us).uzonesize
+ * MEDIA_INFO(us).blocksize;
+
+ /* Report capacity and page size */
+ ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1);
+ ((__be32 *) ptr)[1] = cpu_to_be32(512);
+
+ usb_stor_set_xfer_buf(ptr, 8, srb);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == READ_10) {
+ unsigned int page, pages;
+
+ rc = alauda_check_media(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+ page <<= 16;
+ page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+ pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+ usb_stor_dbg(us, "READ_10: page %d pagect %d\n", page, pages);
+
+ return alauda_read_data(us, page, pages);
+ }
+
+ if (srb->cmnd[0] == WRITE_10) {
+ unsigned int page, pages;
+
+ rc = alauda_check_media(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+ page <<= 16;
+ page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+ pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+ usb_stor_dbg(us, "WRITE_10: page %d pagect %d\n", page, pages);
+
+ return alauda_write_data(us, page, pages);
+ }
+
+ if (srb->cmnd[0] == REQUEST_SENSE) {
+ usb_stor_dbg(us, "REQUEST_SENSE\n");
+
+ memset(ptr, 0, 18);
+ ptr[0] = 0xF0;
+ ptr[2] = info->sense_key;
+ ptr[7] = 11;
+ ptr[12] = info->sense_asc;
+ ptr[13] = info->sense_ascq;
+ usb_stor_set_xfer_buf(ptr, 18, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+ /* sure. whatever. not like we can stop the user from popping
+ the media out of the device (no locking doors, etc) */
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
+ info->sense_key = 0x05;
+ info->sense_asc = 0x20;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+static int alauda_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - alauda_usb_ids) + alauda_unusual_dev_list);
+ if (result)
+ return result;
+
+ us->transport_name = "Alauda Control/Bulk";
+ us->transport = alauda_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ us->max_lun = 1;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver alauda_driver = {
+ .name = "ums-alauda",
+ .probe = alauda_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = alauda_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(alauda_driver);
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
new file mode 100644
index 000000000..b3466d139
--- /dev/null
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -0,0 +1,289 @@
+/*
+ * Support for emulating SAT (ata pass through) on devices based
+ * on the Cypress USB/ATA bridge supporting ATACB.
+ *
+ * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_eh.h>
+#include <linux/ata.h>
+
+#include "usb.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB");
+MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id cypress_usb_ids[] = {
+# include "unusual_cypress.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev cypress_unusual_dev_list[] = {
+# include "unusual_cypress.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/*
+ * ATACB is a protocol used on cypress usb<->ata bridge to
+ * send raw ATA command over mass storage
+ * There is a ATACB2 protocol that support LBA48 on newer chip.
+ * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
+ * datasheet from cypress.com.
+ */
+static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
+{
+ unsigned char save_cmnd[MAX_COMMAND_SIZE];
+
+ if (likely(srb->cmnd[0] != ATA_16 && srb->cmnd[0] != ATA_12)) {
+ usb_stor_transparent_scsi_command(srb, us);
+ return;
+ }
+
+ memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
+ memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
+
+ /* check if we support the command */
+ if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
+ goto invalid_fld;
+ /* check protocol */
+ switch ((save_cmnd[1] >> 1) & 0xf) {
+ case 3: /*no DATA */
+ case 4: /* PIO in */
+ case 5: /* PIO out */
+ break;
+ default:
+ goto invalid_fld;
+ }
+
+ /* first build the ATACB command */
+ srb->cmd_len = 16;
+
+ srb->cmnd[0] = 0x24; /* bVSCBSignature : vendor-specific command
+ this value can change, but most(all ?) manufacturers
+ keep the cypress default : 0x24 */
+ srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */
+
+ srb->cmnd[3] = 0xff - 1; /* features, sector count, lba low, lba med
+ lba high, device, command are valid */
+ srb->cmnd[4] = 1; /* TransferBlockCount : 512 */
+
+ if (save_cmnd[0] == ATA_16) {
+ srb->cmnd[ 6] = save_cmnd[ 4]; /* features */
+ srb->cmnd[ 7] = save_cmnd[ 6]; /* sector count */
+ srb->cmnd[ 8] = save_cmnd[ 8]; /* lba low */
+ srb->cmnd[ 9] = save_cmnd[10]; /* lba med */
+ srb->cmnd[10] = save_cmnd[12]; /* lba high */
+ srb->cmnd[11] = save_cmnd[13]; /* device */
+ srb->cmnd[12] = save_cmnd[14]; /* command */
+
+ if (save_cmnd[1] & 0x01) {/* extended bit set for LBA48 */
+ /* this could be supported by atacb2 */
+ if (save_cmnd[3] || save_cmnd[5] || save_cmnd[7] || save_cmnd[9]
+ || save_cmnd[11])
+ goto invalid_fld;
+ }
+ } else { /* ATA12 */
+ srb->cmnd[ 6] = save_cmnd[3]; /* features */
+ srb->cmnd[ 7] = save_cmnd[4]; /* sector count */
+ srb->cmnd[ 8] = save_cmnd[5]; /* lba low */
+ srb->cmnd[ 9] = save_cmnd[6]; /* lba med */
+ srb->cmnd[10] = save_cmnd[7]; /* lba high */
+ srb->cmnd[11] = save_cmnd[8]; /* device */
+ srb->cmnd[12] = save_cmnd[9]; /* command */
+
+ }
+ /* Filter SET_FEATURES - XFER MODE command */
+ if ((srb->cmnd[12] == ATA_CMD_SET_FEATURES)
+ && (srb->cmnd[6] == SETFEATURES_XFER))
+ goto invalid_fld;
+
+ if (srb->cmnd[12] == ATA_CMD_ID_ATA || srb->cmnd[12] == ATA_CMD_ID_ATAPI)
+ srb->cmnd[2] |= (1<<7); /* set IdentifyPacketDevice for these cmds */
+
+
+ usb_stor_transparent_scsi_command(srb, us);
+
+ /* if the device doesn't support ATACB
+ */
+ if (srb->result == SAM_STAT_CHECK_CONDITION &&
+ memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
+ sizeof(usb_stor_sense_invalidCDB)) == 0) {
+ usb_stor_dbg(us, "cypress atacb not supported ???\n");
+ goto end;
+ }
+
+ /* if ck_cond flags is set, and there wasn't critical error,
+ * build the special sense
+ */
+ if ((srb->result != (DID_ERROR << 16) &&
+ srb->result != (DID_ABORT << 16)) &&
+ save_cmnd[2] & 0x20) {
+ struct scsi_eh_save ses;
+ unsigned char regs[8];
+ unsigned char *sb = srb->sense_buffer;
+ unsigned char *desc = sb + 8;
+ int tmp_result;
+
+ /* build the command for
+ * reading the ATA registers */
+ scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
+
+ /* we use the same command as before, but we set
+ * the read taskfile bit, for not executing atacb command,
+ * but reading register selected in srb->cmnd[4]
+ */
+ srb->cmd_len = 16;
+ srb->cmnd = ses.cmnd;
+ srb->cmnd[2] = 1;
+
+ usb_stor_transparent_scsi_command(srb, us);
+ memcpy(regs, srb->sense_buffer, sizeof(regs));
+ tmp_result = srb->result;
+ scsi_eh_restore_cmnd(srb, &ses);
+ /* we fail to get registers, report invalid command */
+ if (tmp_result != SAM_STAT_GOOD)
+ goto invalid_fld;
+
+ /* build the sense */
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ /* set sk, asc for a good command */
+ sb[1] = RECOVERED_ERROR;
+ sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */
+ sb[3] = 0x1D;
+
+ /* XXX we should generate sk, asc, ascq from status and error
+ * regs
+ * (see 11.1 Error translation ATA device error to SCSI error
+ * map, and ata_to_sense_error from libata.)
+ */
+
+ /* Sense data is current and format is descriptor. */
+ sb[0] = 0x72;
+ desc[0] = 0x09; /* ATA_RETURN_DESCRIPTOR */
+
+ /* set length of additional sense data */
+ sb[7] = 14;
+ desc[1] = 12;
+
+ /* Copy registers into sense buffer. */
+ desc[ 2] = 0x00;
+ desc[ 3] = regs[1]; /* features */
+ desc[ 5] = regs[2]; /* sector count */
+ desc[ 7] = regs[3]; /* lba low */
+ desc[ 9] = regs[4]; /* lba med */
+ desc[11] = regs[5]; /* lba high */
+ desc[12] = regs[6]; /* device */
+ desc[13] = regs[7]; /* command */
+
+ srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+ }
+ goto end;
+invalid_fld:
+ srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ memcpy(srb->sense_buffer,
+ usb_stor_sense_invalidCDB,
+ sizeof(usb_stor_sense_invalidCDB));
+end:
+ memcpy(srb->cmnd, save_cmnd, sizeof(save_cmnd));
+ if (srb->cmnd[0] == ATA_12)
+ srb->cmd_len = 12;
+}
+
+
+static int cypress_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+ struct usb_device *device;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - cypress_usb_ids) + cypress_unusual_dev_list);
+ if (result)
+ return result;
+
+ /* Among CY7C68300 chips, the A revision does not support Cypress ATACB
+ * Filter out this revision from EEPROM default descriptor values
+ */
+ device = interface_to_usbdev(intf);
+ if (device->descriptor.iManufacturer != 0x38 ||
+ device->descriptor.iProduct != 0x4e ||
+ device->descriptor.iSerialNumber != 0x64) {
+ us->protocol_name = "Transparent SCSI with Cypress ATACB";
+ us->proto_handler = cypress_atacb_passthrough;
+ } else {
+ us->protocol_name = "Transparent SCSI";
+ us->proto_handler = usb_stor_transparent_scsi_command;
+ }
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver cypress_driver = {
+ .name = "ums-cypress",
+ .probe = cypress_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = cypress_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(cypress_driver);
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
new file mode 100644
index 000000000..7b17c2169
--- /dev/null
+++ b/drivers/usb/storage/datafab.c
@@ -0,0 +1,758 @@
+/* Driver for Datafab USB Compact Flash reader
+ *
+ * datafab driver v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
+ *
+ * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
+ * which I used as a template for this driver.
+ *
+ * Some bugfixes and scatter-gather code by Gregory P. Smith
+ * (greg-usb@electricrain.com)
+ *
+ * Fix for media change by Joerg Schneider (js@joergschneider.com)
+ *
+ * Other contributors:
+ * (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * This driver attempts to support USB CompactFlash reader/writer devices
+ * based on Datafab USB-to-ATA chips. It was specifically developed for the
+ * Datafab MDCFE-B USB CompactFlash reader but has since been found to work
+ * with a variety of Datafab-based devices from a number of manufacturers.
+ * I've received a report of this driver working with a Datafab-based
+ * SmartMedia device though please be aware that I'm personally unable to
+ * test SmartMedia support.
+ *
+ * This driver supports reading and writing. If you're truly paranoid,
+ * however, you can force the driver into a write-protected state by setting
+ * the WP enable bits in datafab_handle_mode_sense(). See the comments
+ * in that routine.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>");
+MODULE_LICENSE("GPL");
+
+struct datafab_info {
+ unsigned long sectors; /* total sector count */
+ unsigned long ssize; /* sector size in bytes */
+ signed char lun; /* used for dual-slot readers */
+
+ /* the following aren't used yet */
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
+
+static int datafab_determine_lun(struct us_data *us,
+ struct datafab_info *info);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id datafab_usb_ids[] = {
+# include "unusual_datafab.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, datafab_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev datafab_unusual_dev_list[] = {
+# include "unusual_datafab.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+static inline int
+datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
+ if (len == 0)
+ return USB_STOR_XFER_GOOD;
+
+ usb_stor_dbg(us, "len = %d\n", len);
+ return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, len, NULL);
+}
+
+
+static inline int
+datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) {
+ if (len == 0)
+ return USB_STOR_XFER_GOOD;
+
+ usb_stor_dbg(us, "len = %d\n", len);
+ return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ data, len, NULL);
+}
+
+
+static int datafab_read_data(struct us_data *us,
+ struct datafab_info *info,
+ u32 sector,
+ u32 sectors)
+{
+ unsigned char *command = us->iobuf;
+ unsigned char *buffer;
+ unsigned char thistime;
+ unsigned int totallen, alloclen;
+ int len, result;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ // we're working in LBA mode. according to the ATA spec,
+ // we can support up to 28-bit addressing. I don't know if Datafab
+ // supports beyond 24-bit addressing. It's kind of hard to test
+ // since it requires > 8GB CF card.
+ //
+ if (sectors > 0x0FFFFFFF)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (info->lun == -1) {
+ result = datafab_determine_lun(us, info);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+ }
+
+ totallen = sectors * info->ssize;
+
+ // Since we don't read more than 64 KB at a time, we have to create
+ // a bounce buffer and move the data a piece at a time between the
+ // bounce buffer and the actual transfer buffer.
+
+ alloclen = min(totallen, 65536u);
+ buffer = kmalloc(alloclen, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ do {
+ // loop, never allocate or transfer more than 64k at once
+ // (min(128k, 255*info->ssize) is the real limit)
+
+ len = min(totallen, alloclen);
+ thistime = (len / info->ssize) & 0xff;
+
+ command[0] = 0;
+ command[1] = thistime;
+ command[2] = sector & 0xFF;
+ command[3] = (sector >> 8) & 0xFF;
+ command[4] = (sector >> 16) & 0xFF;
+
+ command[5] = 0xE0 + (info->lun << 4);
+ command[5] |= (sector >> 24) & 0x0F;
+ command[6] = 0x20;
+ command[7] = 0x01;
+
+ // send the read command
+ result = datafab_bulk_write(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ goto leave;
+
+ // read the result
+ result = datafab_bulk_read(us, buffer, len);
+ if (result != USB_STOR_XFER_GOOD)
+ goto leave;
+
+ // Store the data in the transfer buffer
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &sg_offset, TO_XFER_BUF);
+
+ sector += thistime;
+ totallen -= len;
+ } while (totallen > 0);
+
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+}
+
+
+static int datafab_write_data(struct us_data *us,
+ struct datafab_info *info,
+ u32 sector,
+ u32 sectors)
+{
+ unsigned char *command = us->iobuf;
+ unsigned char *reply = us->iobuf;
+ unsigned char *buffer;
+ unsigned char thistime;
+ unsigned int totallen, alloclen;
+ int len, result;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ // we're working in LBA mode. according to the ATA spec,
+ // we can support up to 28-bit addressing. I don't know if Datafab
+ // supports beyond 24-bit addressing. It's kind of hard to test
+ // since it requires > 8GB CF card.
+ //
+ if (sectors > 0x0FFFFFFF)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (info->lun == -1) {
+ result = datafab_determine_lun(us, info);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+ }
+
+ totallen = sectors * info->ssize;
+
+ // Since we don't write more than 64 KB at a time, we have to create
+ // a bounce buffer and move the data a piece at a time between the
+ // bounce buffer and the actual transfer buffer.
+
+ alloclen = min(totallen, 65536u);
+ buffer = kmalloc(alloclen, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ do {
+ // loop, never allocate or transfer more than 64k at once
+ // (min(128k, 255*info->ssize) is the real limit)
+
+ len = min(totallen, alloclen);
+ thistime = (len / info->ssize) & 0xff;
+
+ // Get the data from the transfer buffer
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &sg_offset, FROM_XFER_BUF);
+
+ command[0] = 0;
+ command[1] = thistime;
+ command[2] = sector & 0xFF;
+ command[3] = (sector >> 8) & 0xFF;
+ command[4] = (sector >> 16) & 0xFF;
+
+ command[5] = 0xE0 + (info->lun << 4);
+ command[5] |= (sector >> 24) & 0x0F;
+ command[6] = 0x30;
+ command[7] = 0x02;
+
+ // send the command
+ result = datafab_bulk_write(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ goto leave;
+
+ // send the data
+ result = datafab_bulk_write(us, buffer, len);
+ if (result != USB_STOR_XFER_GOOD)
+ goto leave;
+
+ // read the result
+ result = datafab_bulk_read(us, reply, 2);
+ if (result != USB_STOR_XFER_GOOD)
+ goto leave;
+
+ if (reply[0] != 0x50 && reply[1] != 0) {
+ usb_stor_dbg(us, "Gah! write return code: %02x %02x\n",
+ reply[0], reply[1]);
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ sector += thistime;
+ totallen -= len;
+ } while (totallen > 0);
+
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+}
+
+
+static int datafab_determine_lun(struct us_data *us,
+ struct datafab_info *info)
+{
+ // Dual-slot readers can be thought of as dual-LUN devices.
+ // We need to determine which card slot is being used.
+ // We'll send an IDENTIFY DEVICE command and see which LUN responds...
+ //
+ // There might be a better way of doing this?
+
+ static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
+ unsigned char *command = us->iobuf;
+ unsigned char *buf;
+ int count = 0, rc;
+
+ if (!info)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ memcpy(command, scommand, 8);
+ buf = kmalloc(512, GFP_NOIO);
+ if (!buf)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "locating...\n");
+
+ // we'll try 3 times before giving up...
+ //
+ while (count++ < 3) {
+ command[5] = 0xa0;
+
+ rc = datafab_bulk_write(us, command, 8);
+ if (rc != USB_STOR_XFER_GOOD) {
+ rc = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ rc = datafab_bulk_read(us, buf, 512);
+ if (rc == USB_STOR_XFER_GOOD) {
+ info->lun = 0;
+ rc = USB_STOR_TRANSPORT_GOOD;
+ goto leave;
+ }
+
+ command[5] = 0xb0;
+
+ rc = datafab_bulk_write(us, command, 8);
+ if (rc != USB_STOR_XFER_GOOD) {
+ rc = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ rc = datafab_bulk_read(us, buf, 512);
+ if (rc == USB_STOR_XFER_GOOD) {
+ info->lun = 1;
+ rc = USB_STOR_TRANSPORT_GOOD;
+ goto leave;
+ }
+
+ msleep(20);
+ }
+
+ rc = USB_STOR_TRANSPORT_ERROR;
+
+ leave:
+ kfree(buf);
+ return rc;
+}
+
+static int datafab_id_device(struct us_data *us,
+ struct datafab_info *info)
+{
+ // this is a variation of the ATA "IDENTIFY DEVICE" command...according
+ // to the ATA spec, 'Sector Count' isn't used but the Windows driver
+ // sets this bit so we do too...
+ //
+ static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
+ unsigned char *command = us->iobuf;
+ unsigned char *reply;
+ int rc;
+
+ if (!info)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (info->lun == -1) {
+ rc = datafab_determine_lun(us, info);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+ }
+
+ memcpy(command, scommand, 8);
+ reply = kmalloc(512, GFP_NOIO);
+ if (!reply)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ command[5] += (info->lun << 4);
+
+ rc = datafab_bulk_write(us, command, 8);
+ if (rc != USB_STOR_XFER_GOOD) {
+ rc = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ // we'll go ahead and extract the media capacity while we're here...
+ //
+ rc = datafab_bulk_read(us, reply, 512);
+ if (rc == USB_STOR_XFER_GOOD) {
+ // capacity is at word offset 57-58
+ //
+ info->sectors = ((u32)(reply[117]) << 24) |
+ ((u32)(reply[116]) << 16) |
+ ((u32)(reply[115]) << 8) |
+ ((u32)(reply[114]) );
+ rc = USB_STOR_TRANSPORT_GOOD;
+ goto leave;
+ }
+
+ rc = USB_STOR_TRANSPORT_ERROR;
+
+ leave:
+ kfree(reply);
+ return rc;
+}
+
+
+static int datafab_handle_mode_sense(struct us_data *us,
+ struct scsi_cmnd * srb,
+ int sense_6)
+{
+ static unsigned char rw_err_page[12] = {
+ 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
+ };
+ static unsigned char cache_page[12] = {
+ 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
+ };
+ static unsigned char rbac_page[12] = {
+ 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
+ };
+ static unsigned char timer_page[8] = {
+ 0x1C, 0x6, 0, 0, 0, 0
+ };
+ unsigned char pc, page_code;
+ unsigned int i = 0;
+ struct datafab_info *info = (struct datafab_info *) (us->extra);
+ unsigned char *ptr = us->iobuf;
+
+ // most of this stuff is just a hack to get things working. the
+ // datafab reader doesn't present a SCSI interface so we
+ // fudge the SCSI commands...
+ //
+
+ pc = srb->cmnd[2] >> 6;
+ page_code = srb->cmnd[2] & 0x3F;
+
+ switch (pc) {
+ case 0x0:
+ usb_stor_dbg(us, "Current values\n");
+ break;
+ case 0x1:
+ usb_stor_dbg(us, "Changeable values\n");
+ break;
+ case 0x2:
+ usb_stor_dbg(us, "Default values\n");
+ break;
+ case 0x3:
+ usb_stor_dbg(us, "Saves values\n");
+ break;
+ }
+
+ memset(ptr, 0, 8);
+ if (sense_6) {
+ ptr[2] = 0x00; // WP enable: 0x80
+ i = 4;
+ } else {
+ ptr[3] = 0x00; // WP enable: 0x80
+ i = 8;
+ }
+
+ switch (page_code) {
+ default:
+ // vendor-specific mode
+ info->sense_key = 0x05;
+ info->sense_asc = 0x24;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+
+ case 0x1:
+ memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+ i += sizeof(rw_err_page);
+ break;
+
+ case 0x8:
+ memcpy(ptr + i, cache_page, sizeof(cache_page));
+ i += sizeof(cache_page);
+ break;
+
+ case 0x1B:
+ memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+ i += sizeof(rbac_page);
+ break;
+
+ case 0x1C:
+ memcpy(ptr + i, timer_page, sizeof(timer_page));
+ i += sizeof(timer_page);
+ break;
+
+ case 0x3F: // retrieve all pages
+ memcpy(ptr + i, timer_page, sizeof(timer_page));
+ i += sizeof(timer_page);
+ memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+ i += sizeof(rbac_page);
+ memcpy(ptr + i, cache_page, sizeof(cache_page));
+ i += sizeof(cache_page);
+ memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+ i += sizeof(rw_err_page);
+ break;
+ }
+
+ if (sense_6)
+ ptr[0] = i - 1;
+ else
+ ((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
+ usb_stor_set_xfer_buf(ptr, i, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static void datafab_info_destructor(void *extra)
+{
+ // this routine is a placeholder...
+ // currently, we don't allocate any extra memory so we're okay
+}
+
+
+// Transport for the Datafab MDCFE-B
+//
+static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ struct datafab_info *info;
+ int rc;
+ unsigned long block, blocks;
+ unsigned char *ptr = us->iobuf;
+ static unsigned char inquiry_reply[8] = {
+ 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+ };
+
+ if (!us->extra) {
+ us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO);
+ if (!us->extra)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ us->extra_destructor = datafab_info_destructor;
+ ((struct datafab_info *)us->extra)->lun = -1;
+ }
+
+ info = (struct datafab_info *) (us->extra);
+
+ if (srb->cmnd[0] == INQUIRY) {
+ usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+ memcpy(ptr, inquiry_reply, sizeof(inquiry_reply));
+ fill_inquiry_response(us, ptr, 36);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == READ_CAPACITY) {
+ info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec
+ rc = datafab_id_device(us, info);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
+ info->sectors, info->ssize);
+
+ // build the reply
+ // we need the last sector, not the number of sectors
+ ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
+ ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
+ usb_stor_set_xfer_buf(ptr, 8, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == MODE_SELECT_10) {
+ usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ // don't bother implementing READ_6 or WRITE_6.
+ //
+ if (srb->cmnd[0] == READ_10) {
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+ usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
+ block, blocks);
+ return datafab_read_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == READ_12) {
+ // we'll probably never see a READ_12 but we'll do it anyway...
+ //
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+ ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
+
+ usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
+ block, blocks);
+ return datafab_read_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == WRITE_10) {
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+ usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
+ block, blocks);
+ return datafab_write_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == WRITE_12) {
+ // we'll probably never see a WRITE_12 but we'll do it anyway...
+ //
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+ ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
+
+ usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
+ block, blocks);
+ return datafab_write_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == TEST_UNIT_READY) {
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
+ return datafab_id_device(us, info);
+ }
+
+ if (srb->cmnd[0] == REQUEST_SENSE) {
+ usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n");
+
+ // this response is pretty bogus right now. eventually if necessary
+ // we can set the correct sense data. so far though it hasn't been
+ // necessary
+ //
+ memset(ptr, 0, 18);
+ ptr[0] = 0xF0;
+ ptr[2] = info->sense_key;
+ ptr[7] = 11;
+ ptr[12] = info->sense_asc;
+ ptr[13] = info->sense_ascq;
+ usb_stor_set_xfer_buf(ptr, 18, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == MODE_SENSE) {
+ usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
+ return datafab_handle_mode_sense(us, srb, 1);
+ }
+
+ if (srb->cmnd[0] == MODE_SENSE_10) {
+ usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
+ return datafab_handle_mode_sense(us, srb, 0);
+ }
+
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+ // sure. whatever. not like we can stop the user from
+ // popping the media out of the device (no locking doors, etc)
+ //
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == START_STOP) {
+ /* this is used by sd.c'check_scsidisk_media_change to detect
+ media change */
+ usb_stor_dbg(us, "START_STOP\n");
+ /* the first datafab_id_device after a media change returns
+ an error (determined experimentally) */
+ rc = datafab_id_device(us, info);
+ if (rc == USB_STOR_TRANSPORT_GOOD) {
+ info->sense_key = NO_SENSE;
+ srb->result = SUCCESS;
+ } else {
+ info->sense_key = UNIT_ATTENTION;
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ }
+ return rc;
+ }
+
+ usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
+ info->sense_key = 0x05;
+ info->sense_asc = 0x20;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+static int datafab_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - datafab_usb_ids) + datafab_unusual_dev_list);
+ if (result)
+ return result;
+
+ us->transport_name = "Datafab Bulk-Only";
+ us->transport = datafab_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ us->max_lun = 1;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver datafab_driver = {
+ .name = "ums-datafab",
+ .probe = datafab_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = datafab_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(datafab_driver);
diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c
new file mode 100644
index 000000000..57bf3ad41
--- /dev/null
+++ b/drivers/usb/storage/debug.c
@@ -0,0 +1,194 @@
+/* Driver for USB Mass Storage compliant devices
+ * Debugging Functions Source Code File
+ *
+ * Current development and maintenance by:
+ * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ * (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Initial work by:
+ * (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/device.h>
+#include <linux/cdrom.h>
+#include <linux/export.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+
+#include "usb.h"
+#include "debug.h"
+#include "scsi.h"
+
+
+void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb)
+{
+ char *what = NULL;
+ int i;
+
+ switch (srb->cmnd[0]) {
+ case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
+ case REZERO_UNIT: what = "REZERO_UNIT"; break;
+ case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
+ case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
+ case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
+ case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
+ case READ_6: what = "READ_6"; break;
+ case WRITE_6: what = "WRITE_6"; break;
+ case SEEK_6: what = "SEEK_6"; break;
+ case READ_REVERSE: what = "READ_REVERSE"; break;
+ case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
+ case SPACE: what = "SPACE"; break;
+ case INQUIRY: what = "INQUIRY"; break;
+ case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
+ case MODE_SELECT: what = "MODE_SELECT"; break;
+ case RESERVE: what = "RESERVE"; break;
+ case RELEASE: what = "RELEASE"; break;
+ case COPY: what = "COPY"; break;
+ case ERASE: what = "ERASE"; break;
+ case MODE_SENSE: what = "MODE_SENSE"; break;
+ case START_STOP: what = "START_STOP"; break;
+ case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
+ case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
+ case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
+ case SET_WINDOW: what = "SET_WINDOW"; break;
+ case READ_CAPACITY: what = "READ_CAPACITY"; break;
+ case READ_10: what = "READ_10"; break;
+ case WRITE_10: what = "WRITE_10"; break;
+ case SEEK_10: what = "SEEK_10"; break;
+ case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
+ case VERIFY: what = "VERIFY"; break;
+ case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
+ case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
+ case SEARCH_LOW: what = "SEARCH_LOW"; break;
+ case SET_LIMITS: what = "SET_LIMITS"; break;
+ case READ_POSITION: what = "READ_POSITION"; break;
+ case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
+ case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
+ case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
+ case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
+ case COMPARE: what = "COMPARE"; break;
+ case COPY_VERIFY: what = "COPY_VERIFY"; break;
+ case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
+ case READ_BUFFER: what = "READ_BUFFER"; break;
+ case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
+ case READ_LONG: what = "READ_LONG"; break;
+ case WRITE_LONG: what = "WRITE_LONG"; break;
+ case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
+ case WRITE_SAME: what = "WRITE_SAME"; break;
+ case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break;
+ case READ_TOC: what = "READ_TOC"; break;
+ case GPCMD_READ_HEADER: what = "READ HEADER"; break;
+ case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break;
+ case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break;
+ case GPCMD_GET_EVENT_STATUS_NOTIFICATION:
+ what = "GET EVENT/STATUS NOTIFICATION"; break;
+ case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break;
+ case LOG_SELECT: what = "LOG_SELECT"; break;
+ case LOG_SENSE: what = "LOG_SENSE"; break;
+ case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break;
+ case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break;
+ case GPCMD_READ_TRACK_RZONE_INFO:
+ what = "READ TRACK INFORMATION"; break;
+ case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break;
+ case GPCMD_SEND_OPC: what = "SEND OPC"; break;
+ case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
+ case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break;
+ case 0x59: what = "READ MASTER CUE"; break;
+ case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
+ case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break;
+ case 0x5C: what = "READ BUFFER CAPACITY"; break;
+ case 0x5D: what = "SEND CUE SHEET"; break;
+ case GPCMD_BLANK: what = "BLANK"; break;
+ case REPORT_LUNS: what = "REPORT LUNS"; break;
+ case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break;
+ case READ_12: what = "READ_12"; break;
+ case WRITE_12: what = "WRITE_12"; break;
+ case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
+ case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
+ case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
+ case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
+ case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
+ case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
+ case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break;
+ case GPCMD_SCAN: what = "SCAN"; break;
+ case GPCMD_SET_SPEED: what = "SET CD SPEED"; break;
+ case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break;
+ case GPCMD_READ_CD: what = "READ CD"; break;
+ case 0xE1: what = "WRITE CONTINUE"; break;
+ case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
+ default: what = "(unknown command)"; break;
+ }
+ usb_stor_dbg(us, "Command %s (%d bytes)\n", what, srb->cmd_len);
+ usb_stor_dbg(us, "bytes: ");
+ for (i = 0; i < srb->cmd_len && i < 16; i++)
+ US_DEBUGPX(" %02x", srb->cmnd[i]);
+ US_DEBUGPX("\n");
+}
+
+void usb_stor_show_sense(const struct us_data *us,
+ unsigned char key,
+ unsigned char asc,
+ unsigned char ascq)
+{
+ const char *what, *keystr, *fmt;
+
+ keystr = scsi_sense_key_string(key);
+ what = scsi_extd_sense_format(asc, ascq, &fmt);
+
+ if (keystr == NULL)
+ keystr = "(Unknown Key)";
+ if (what == NULL)
+ what = "(unknown ASC/ASCQ)";
+
+ usb_stor_dbg(us, "%s: ", keystr);
+ if (fmt)
+ US_DEBUGPX("%s (%s%x)\n", what, fmt, ascq);
+ else
+ US_DEBUGPX("%s\n", what);
+}
+
+void usb_stor_dbg(const struct us_data *us, const char *fmt, ...)
+{
+ va_list args;
+
+ va_start(args, fmt);
+
+ dev_vprintk_emit(LOGLEVEL_DEBUG, &us->pusb_dev->dev, fmt, args);
+
+ va_end(args);
+}
+EXPORT_SYMBOL_GPL(usb_stor_dbg);
diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h
new file mode 100644
index 000000000..f52520306
--- /dev/null
+++ b/drivers/usb/storage/debug.h
@@ -0,0 +1,71 @@
+/* Driver for USB Mass Storage compliant devices
+ * Debugging Functions Header File
+ *
+ * Current development and maintenance by:
+ * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Initial work by:
+ * (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DEBUG_H_
+#define _DEBUG_H_
+
+#include <linux/kernel.h>
+
+#define USB_STORAGE "usb-storage: "
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb);
+void usb_stor_show_sense(const struct us_data *us, unsigned char key,
+ unsigned char asc, unsigned char ascq);
+__printf(2, 3) void usb_stor_dbg(const struct us_data *us,
+ const char *fmt, ...);
+
+#define US_DEBUGPX(fmt, ...) printk(fmt, ##__VA_ARGS__)
+#define US_DEBUG(x) x
+#else
+__printf(2, 3)
+static inline void _usb_stor_dbg(const struct us_data *us,
+ const char *fmt, ...)
+{
+}
+#define usb_stor_dbg(us, fmt, ...) \
+ do { if (0) _usb_stor_dbg(us, fmt, ##__VA_ARGS__); } while (0)
+#define US_DEBUGPX(fmt, ...) \
+ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+#define US_DEBUG(x)
+#endif
+
+#endif
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
new file mode 100644
index 000000000..27a08c02e
--- /dev/null
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -0,0 +1,2415 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include <linux/firmware.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+#define SD_INIT1_FIRMWARE "/*(DEBLOBBED)*/"
+#define SD_INIT2_FIRMWARE "/*(DEBLOBBED)*/"
+#define SD_RW_FIRMWARE "/*(DEBLOBBED)*/"
+#define MS_INIT_FIRMWARE "/*(DEBLOBBED)*/"
+#define MSP_RW_FIRMWARE "/*(DEBLOBBED)*/"
+#define MS_RW_FIRMWARE "/*(DEBLOBBED)*/"
+
+MODULE_DESCRIPTION("Driver for ENE UB6250 reader");
+MODULE_LICENSE("GPL");
+/*(DEBLOBBED)*/
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags)}
+
+static struct usb_device_id ene_ub6250_usb_ids[] = {
+# include "unusual_ene_ub6250.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, ene_ub6250_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev ene_ub6250_unusual_dev_list[] = {
+# include "unusual_ene_ub6250.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+
+/* ENE bin code len */
+#define ENE_BIN_CODE_LEN 0x800
+/* EnE HW Register */
+#define REG_CARD_STATUS 0xFF83
+#define REG_HW_TRAP1 0xFF89
+
+/* SRB Status */
+#define SS_SUCCESS 0x00 /* No Sense */
+#define SS_NOT_READY 0x02
+#define SS_MEDIUM_ERR 0x03
+#define SS_HW_ERR 0x04
+#define SS_ILLEGAL_REQUEST 0x05
+#define SS_UNIT_ATTENTION 0x06
+
+/* ENE Load FW Pattern */
+#define SD_INIT1_PATTERN 1
+#define SD_INIT2_PATTERN 2
+#define SD_RW_PATTERN 3
+#define MS_INIT_PATTERN 4
+#define MSP_RW_PATTERN 5
+#define MS_RW_PATTERN 6
+#define SM_INIT_PATTERN 7
+#define SM_RW_PATTERN 8
+
+#define FDIR_WRITE 0
+#define FDIR_READ 1
+
+/* For MS Card */
+
+/* Status Register 1 */
+#define MS_REG_ST1_MB 0x80 /* media busy */
+#define MS_REG_ST1_FB1 0x40 /* flush busy 1 */
+#define MS_REG_ST1_DTER 0x20 /* error on data(corrected) */
+#define MS_REG_ST1_UCDT 0x10 /* unable to correct data */
+#define MS_REG_ST1_EXER 0x08 /* error on extra(corrected) */
+#define MS_REG_ST1_UCEX 0x04 /* unable to correct extra */
+#define MS_REG_ST1_FGER 0x02 /* error on overwrite flag(corrected) */
+#define MS_REG_ST1_UCFG 0x01 /* unable to correct overwrite flag */
+#define MS_REG_ST1_DEFAULT (MS_REG_ST1_MB | MS_REG_ST1_FB1 | MS_REG_ST1_DTER | MS_REG_ST1_UCDT | MS_REG_ST1_EXER | MS_REG_ST1_UCEX | MS_REG_ST1_FGER | MS_REG_ST1_UCFG)
+
+/* Overwrite Area */
+#define MS_REG_OVR_BKST 0x80 /* block status */
+#define MS_REG_OVR_BKST_OK MS_REG_OVR_BKST /* OK */
+#define MS_REG_OVR_BKST_NG 0x00 /* NG */
+#define MS_REG_OVR_PGST0 0x40 /* page status */
+#define MS_REG_OVR_PGST1 0x20
+#define MS_REG_OVR_PGST_MASK (MS_REG_OVR_PGST0 | MS_REG_OVR_PGST1)
+#define MS_REG_OVR_PGST_OK (MS_REG_OVR_PGST0 | MS_REG_OVR_PGST1) /* OK */
+#define MS_REG_OVR_PGST_NG MS_REG_OVR_PGST1 /* NG */
+#define MS_REG_OVR_PGST_DATA_ERROR 0x00 /* data error */
+#define MS_REG_OVR_UDST 0x10 /* update status */
+#define MS_REG_OVR_UDST_UPDATING 0x00 /* updating */
+#define MS_REG_OVR_UDST_NO_UPDATE MS_REG_OVR_UDST
+#define MS_REG_OVR_RESERVED 0x08
+#define MS_REG_OVR_DEFAULT (MS_REG_OVR_BKST_OK | MS_REG_OVR_PGST_OK | MS_REG_OVR_UDST_NO_UPDATE | MS_REG_OVR_RESERVED)
+
+/* Management Flag */
+#define MS_REG_MNG_SCMS0 0x20 /* serial copy management system */
+#define MS_REG_MNG_SCMS1 0x10
+#define MS_REG_MNG_SCMS_MASK (MS_REG_MNG_SCMS0 | MS_REG_MNG_SCMS1)
+#define MS_REG_MNG_SCMS_COPY_OK (MS_REG_MNG_SCMS0 | MS_REG_MNG_SCMS1)
+#define MS_REG_MNG_SCMS_ONE_COPY MS_REG_MNG_SCMS1
+#define MS_REG_MNG_SCMS_NO_COPY 0x00
+#define MS_REG_MNG_ATFLG 0x08 /* address transfer table flag */
+#define MS_REG_MNG_ATFLG_OTHER MS_REG_MNG_ATFLG /* other */
+#define MS_REG_MNG_ATFLG_ATTBL 0x00 /* address transfer table */
+#define MS_REG_MNG_SYSFLG 0x04 /* system flag */
+#define MS_REG_MNG_SYSFLG_USER MS_REG_MNG_SYSFLG /* user block */
+#define MS_REG_MNG_SYSFLG_BOOT 0x00 /* system block */
+#define MS_REG_MNG_RESERVED 0xc3
+#define MS_REG_MNG_DEFAULT (MS_REG_MNG_SCMS_COPY_OK | MS_REG_MNG_ATFLG_OTHER | MS_REG_MNG_SYSFLG_USER | MS_REG_MNG_RESERVED)
+
+
+#define MS_MAX_PAGES_PER_BLOCK 32
+#define MS_MAX_INITIAL_ERROR_BLOCKS 10
+#define MS_LIB_BITS_PER_BYTE 8
+
+#define MS_SYSINF_FORMAT_FAT 1
+#define MS_SYSINF_USAGE_GENERAL 0
+
+#define MS_SYSINF_MSCLASS_TYPE_1 1
+#define MS_SYSINF_PAGE_SIZE MS_BYTES_PER_PAGE /* fixed */
+
+#define MS_SYSINF_CARDTYPE_RDONLY 1
+#define MS_SYSINF_CARDTYPE_RDWR 2
+#define MS_SYSINF_CARDTYPE_HYBRID 3
+#define MS_SYSINF_SECURITY 0x01
+#define MS_SYSINF_SECURITY_NO_SUPPORT MS_SYSINF_SECURITY
+#define MS_SYSINF_SECURITY_SUPPORT 0
+
+#define MS_SYSINF_RESERVED1 1
+#define MS_SYSINF_RESERVED2 1
+
+#define MS_SYSENT_TYPE_INVALID_BLOCK 0x01
+#define MS_SYSENT_TYPE_CIS_IDI 0x0a /* CIS/IDI */
+
+#define SIZE_OF_KIRO 1024
+#define BYTE_MASK 0xff
+
+/* ms error code */
+#define MS_STATUS_WRITE_PROTECT 0x0106
+#define MS_STATUS_SUCCESS 0x0000
+#define MS_ERROR_FLASH_READ 0x8003
+#define MS_ERROR_FLASH_ERASE 0x8005
+#define MS_LB_ERROR 0xfff0
+#define MS_LB_BOOT_BLOCK 0xfff1
+#define MS_LB_INITIAL_ERROR 0xfff2
+#define MS_STATUS_SUCCESS_WITH_ECC 0xfff3
+#define MS_LB_ACQUIRED_ERROR 0xfff4
+#define MS_LB_NOT_USED_ERASED 0xfff5
+#define MS_NOCARD_ERROR 0xfff8
+#define MS_NO_MEMORY_ERROR 0xfff9
+#define MS_STATUS_INT_ERROR 0xfffa
+#define MS_STATUS_ERROR 0xfffe
+#define MS_LB_NOT_USED 0xffff
+
+#define MS_REG_MNG_SYSFLG 0x04 /* system flag */
+#define MS_REG_MNG_SYSFLG_USER MS_REG_MNG_SYSFLG /* user block */
+
+#define MS_BOOT_BLOCK_ID 0x0001
+#define MS_BOOT_BLOCK_FORMAT_VERSION 0x0100
+#define MS_BOOT_BLOCK_DATA_ENTRIES 2
+
+#define MS_NUMBER_OF_SYSTEM_ENTRY 4
+#define MS_NUMBER_OF_BOOT_BLOCK 2
+#define MS_BYTES_PER_PAGE 512
+#define MS_LOGICAL_BLOCKS_PER_SEGMENT 496
+#define MS_LOGICAL_BLOCKS_IN_1ST_SEGMENT 494
+
+#define MS_PHYSICAL_BLOCKS_PER_SEGMENT 0x200 /* 512 */
+#define MS_PHYSICAL_BLOCKS_PER_SEGMENT_MASK 0x1ff
+
+/* overwrite area */
+#define MS_REG_OVR_BKST 0x80 /* block status */
+#define MS_REG_OVR_BKST_OK MS_REG_OVR_BKST /* OK */
+#define MS_REG_OVR_BKST_NG 0x00 /* NG */
+
+/* Status Register 1 */
+#define MS_REG_ST1_DTER 0x20 /* error on data(corrected) */
+#define MS_REG_ST1_EXER 0x08 /* error on extra(corrected) */
+#define MS_REG_ST1_FGER 0x02 /* error on overwrite flag(corrected) */
+
+/* MemoryStick Register */
+/* Status Register 0 */
+#define MS_REG_ST0_WP 0x01 /* write protected */
+#define MS_REG_ST0_WP_ON MS_REG_ST0_WP
+
+#define MS_LIB_CTRL_RDONLY 0
+#define MS_LIB_CTRL_WRPROTECT 1
+
+/*dphy->log table */
+#define ms_libconv_to_logical(pdx, PhyBlock) (((PhyBlock) >= (pdx)->MS_Lib.NumberOfPhyBlock) ? MS_STATUS_ERROR : (pdx)->MS_Lib.Phy2LogMap[PhyBlock])
+#define ms_libconv_to_physical(pdx, LogBlock) (((LogBlock) >= (pdx)->MS_Lib.NumberOfLogBlock) ? MS_STATUS_ERROR : (pdx)->MS_Lib.Log2PhyMap[LogBlock])
+
+#define ms_lib_ctrl_set(pdx, Flag) ((pdx)->MS_Lib.flags |= (1 << (Flag)))
+#define ms_lib_ctrl_reset(pdx, Flag) ((pdx)->MS_Lib.flags &= ~(1 << (Flag)))
+#define ms_lib_ctrl_check(pdx, Flag) ((pdx)->MS_Lib.flags & (1 << (Flag)))
+
+#define ms_lib_iswritable(pdx) ((ms_lib_ctrl_check((pdx), MS_LIB_CTRL_RDONLY) == 0) && (ms_lib_ctrl_check(pdx, MS_LIB_CTRL_WRPROTECT) == 0))
+#define ms_lib_clear_pagemap(pdx) memset((pdx)->MS_Lib.pagemap, 0, sizeof((pdx)->MS_Lib.pagemap))
+#define memstick_logaddr(logadr1, logadr0) ((((u16)(logadr1)) << 8) | (logadr0))
+
+
+struct SD_STATUS {
+ u8 Insert:1;
+ u8 Ready:1;
+ u8 MediaChange:1;
+ u8 IsMMC:1;
+ u8 HiCapacity:1;
+ u8 HiSpeed:1;
+ u8 WtP:1;
+ u8 Reserved:1;
+};
+
+struct MS_STATUS {
+ u8 Insert:1;
+ u8 Ready:1;
+ u8 MediaChange:1;
+ u8 IsMSPro:1;
+ u8 IsMSPHG:1;
+ u8 Reserved1:1;
+ u8 WtP:1;
+ u8 Reserved2:1;
+};
+
+struct SM_STATUS {
+ u8 Insert:1;
+ u8 Ready:1;
+ u8 MediaChange:1;
+ u8 Reserved:3;
+ u8 WtP:1;
+ u8 IsMS:1;
+};
+
+struct ms_bootblock_cis {
+ u8 bCistplDEVICE[6]; /* 0 */
+ u8 bCistplDEVICE0C[6]; /* 6 */
+ u8 bCistplJEDECC[4]; /* 12 */
+ u8 bCistplMANFID[6]; /* 16 */
+ u8 bCistplVER1[32]; /* 22 */
+ u8 bCistplFUNCID[4]; /* 54 */
+ u8 bCistplFUNCE0[4]; /* 58 */
+ u8 bCistplFUNCE1[5]; /* 62 */
+ u8 bCistplCONF[7]; /* 67 */
+ u8 bCistplCFTBLENT0[10];/* 74 */
+ u8 bCistplCFTBLENT1[8]; /* 84 */
+ u8 bCistplCFTBLENT2[12];/* 92 */
+ u8 bCistplCFTBLENT3[8]; /* 104 */
+ u8 bCistplCFTBLENT4[17];/* 112 */
+ u8 bCistplCFTBLENT5[8]; /* 129 */
+ u8 bCistplCFTBLENT6[17];/* 137 */
+ u8 bCistplCFTBLENT7[8]; /* 154 */
+ u8 bCistplNOLINK[3]; /* 162 */
+} ;
+
+struct ms_bootblock_idi {
+#define MS_IDI_GENERAL_CONF 0x848A
+ u16 wIDIgeneralConfiguration; /* 0 */
+ u16 wIDInumberOfCylinder; /* 1 */
+ u16 wIDIreserved0; /* 2 */
+ u16 wIDInumberOfHead; /* 3 */
+ u16 wIDIbytesPerTrack; /* 4 */
+ u16 wIDIbytesPerSector; /* 5 */
+ u16 wIDIsectorsPerTrack; /* 6 */
+ u16 wIDItotalSectors[2]; /* 7-8 high,low */
+ u16 wIDIreserved1[11]; /* 9-19 */
+ u16 wIDIbufferType; /* 20 */
+ u16 wIDIbufferSize; /* 21 */
+ u16 wIDIlongCmdECC; /* 22 */
+ u16 wIDIfirmVersion[4]; /* 23-26 */
+ u16 wIDImodelName[20]; /* 27-46 */
+ u16 wIDIreserved2; /* 47 */
+ u16 wIDIlongWordSupported; /* 48 */
+ u16 wIDIdmaSupported; /* 49 */
+ u16 wIDIreserved3; /* 50 */
+ u16 wIDIpioTiming; /* 51 */
+ u16 wIDIdmaTiming; /* 52 */
+ u16 wIDItransferParameter; /* 53 */
+ u16 wIDIformattedCylinder; /* 54 */
+ u16 wIDIformattedHead; /* 55 */
+ u16 wIDIformattedSectorsPerTrack;/* 56 */
+ u16 wIDIformattedTotalSectors[2];/* 57-58 */
+ u16 wIDImultiSector; /* 59 */
+ u16 wIDIlbaSectors[2]; /* 60-61 */
+ u16 wIDIsingleWordDMA; /* 62 */
+ u16 wIDImultiWordDMA; /* 63 */
+ u16 wIDIreserved4[192]; /* 64-255 */
+};
+
+struct ms_bootblock_sysent_rec {
+ u32 dwStart;
+ u32 dwSize;
+ u8 bType;
+ u8 bReserved[3];
+};
+
+struct ms_bootblock_sysent {
+ struct ms_bootblock_sysent_rec entry[MS_NUMBER_OF_SYSTEM_ENTRY];
+};
+
+struct ms_bootblock_sysinf {
+ u8 bMsClass; /* must be 1 */
+ u8 bCardType; /* see below */
+ u16 wBlockSize; /* n KB */
+ u16 wBlockNumber; /* number of physical block */
+ u16 wTotalBlockNumber; /* number of logical block */
+ u16 wPageSize; /* must be 0x200 */
+ u8 bExtraSize; /* 0x10 */
+ u8 bSecuritySupport;
+ u8 bAssemblyDate[8];
+ u8 bFactoryArea[4];
+ u8 bAssemblyMakerCode;
+ u8 bAssemblyMachineCode[3];
+ u16 wMemoryMakerCode;
+ u16 wMemoryDeviceCode;
+ u16 wMemorySize;
+ u8 bReserved1;
+ u8 bReserved2;
+ u8 bVCC;
+ u8 bVPP;
+ u16 wControllerChipNumber;
+ u16 wControllerFunction; /* New MS */
+ u8 bReserved3[9]; /* New MS */
+ u8 bParallelSupport; /* New MS */
+ u16 wFormatValue; /* New MS */
+ u8 bFormatType;
+ u8 bUsage;
+ u8 bDeviceType;
+ u8 bReserved4[22];
+ u8 bFUValue3;
+ u8 bFUValue4;
+ u8 bReserved5[15];
+};
+
+struct ms_bootblock_header {
+ u16 wBlockID;
+ u16 wFormatVersion;
+ u8 bReserved1[184];
+ u8 bNumberOfDataEntry;
+ u8 bReserved2[179];
+};
+
+struct ms_bootblock_page0 {
+ struct ms_bootblock_header header;
+ struct ms_bootblock_sysent sysent;
+ struct ms_bootblock_sysinf sysinf;
+};
+
+struct ms_bootblock_cis_idi {
+ union {
+ struct ms_bootblock_cis cis;
+ u8 dmy[256];
+ } cis;
+
+ union {
+ struct ms_bootblock_idi idi;
+ u8 dmy[256];
+ } idi;
+
+};
+
+/* ENE MS Lib struct */
+struct ms_lib_type_extdat {
+ u8 reserved;
+ u8 intr;
+ u8 status0;
+ u8 status1;
+ u8 ovrflg;
+ u8 mngflg;
+ u16 logadr;
+};
+
+struct ms_lib_ctrl {
+ u32 flags;
+ u32 BytesPerSector;
+ u32 NumberOfCylinder;
+ u32 SectorsPerCylinder;
+ u16 cardType; /* R/W, RO, Hybrid */
+ u16 blockSize;
+ u16 PagesPerBlock;
+ u16 NumberOfPhyBlock;
+ u16 NumberOfLogBlock;
+ u16 NumberOfSegment;
+ u16 *Phy2LogMap; /* phy2log table */
+ u16 *Log2PhyMap; /* log2phy table */
+ u16 wrtblk;
+ unsigned char *pagemap[(MS_MAX_PAGES_PER_BLOCK + (MS_LIB_BITS_PER_BYTE-1)) / MS_LIB_BITS_PER_BYTE];
+ unsigned char *blkpag;
+ struct ms_lib_type_extdat *blkext;
+ unsigned char copybuf[512];
+};
+
+
+/* SD Block Length */
+/* 2^9 = 512 Bytes, The HW maximum read/write data length */
+#define SD_BLOCK_LEN 9
+
+struct ene_ub6250_info {
+ /* for 6250 code */
+ struct SD_STATUS SD_Status;
+ struct MS_STATUS MS_Status;
+ struct SM_STATUS SM_Status;
+
+ /* ----- SD Control Data ---------------- */
+ /*SD_REGISTER SD_Regs; */
+ u16 SD_Block_Mult;
+ u8 SD_READ_BL_LEN;
+ u16 SD_C_SIZE;
+ u8 SD_C_SIZE_MULT;
+
+ /* SD/MMC New spec. */
+ u8 SD_SPEC_VER;
+ u8 SD_CSD_VER;
+ u8 SD20_HIGH_CAPACITY;
+ u32 HC_C_SIZE;
+ u8 MMC_SPEC_VER;
+ u8 MMC_BusWidth;
+ u8 MMC_HIGH_CAPACITY;
+
+ /*----- MS Control Data ---------------- */
+ bool MS_SWWP;
+ u32 MSP_TotalBlock;
+ struct ms_lib_ctrl MS_Lib;
+ bool MS_IsRWPage;
+ u16 MS_Model;
+
+ /*----- SM Control Data ---------------- */
+ u8 SM_DeviceID;
+ u8 SM_CardID;
+
+ unsigned char *testbuf;
+ u8 BIN_FLAG;
+ u32 bl_num;
+ int SrbStatus;
+
+ /*------Power Managerment ---------------*/
+ bool Power_IsResum;
+};
+
+static int ene_sd_init(struct us_data *us);
+static int ene_ms_init(struct us_data *us);
+static int ene_load_bincode(struct us_data *us, unsigned char flag);
+
+static void ene_ub6250_info_destructor(void *extra)
+{
+ if (!extra)
+ return;
+}
+
+static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
+
+ int result;
+ unsigned int residue;
+ unsigned int cswlen = 0, partial = 0;
+ unsigned int transfer_length = bcb->DataTransferLength;
+
+ /* usb_stor_dbg(us, "transport --- ene_send_scsi_cmd\n"); */
+ /* send cmd to out endpoint */
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ bcb, US_BULK_CB_WRAP_LEN, NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "send cmd to out endpoint fail ---\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (buf) {
+ unsigned int pipe = fDir;
+
+ if (fDir == FDIR_READ)
+ pipe = us->recv_bulk_pipe;
+ else
+ pipe = us->send_bulk_pipe;
+
+ /* Bulk */
+ if (use_sg) {
+ result = usb_stor_bulk_srb(us, pipe, us->srb);
+ } else {
+ result = usb_stor_bulk_transfer_sg(us, pipe, buf,
+ transfer_length, 0, &partial);
+ }
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "data transfer fail ---\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+ }
+
+ /* Get CSW for device status */
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
+ US_BULK_CS_WRAP_LEN, &cswlen);
+
+ if (result == USB_STOR_XFER_SHORT && cswlen == 0) {
+ usb_stor_dbg(us, "Received 0-length CSW; retrying...\n");
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+ }
+
+ if (result == USB_STOR_XFER_STALLED) {
+ /* get the status again */
+ usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n");
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ bcs, US_BULK_CS_WRAP_LEN, NULL);
+ }
+
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* check bulk status */
+ residue = le32_to_cpu(bcs->Residue);
+
+ /* try to compute the actual residue, based on how much data
+ * was really transferred and what the device tells us */
+ if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
+ residue = min(residue, transfer_length);
+ if (us->srb != NULL)
+ scsi_set_resid(us->srb, max(scsi_get_resid(us->srb),
+ (int)residue));
+ }
+
+ if (bcs->Status != US_BULK_STAT_OK)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int sd_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ if (info->SD_Status.Insert && info->SD_Status.Ready)
+ return USB_STOR_TRANSPORT_GOOD;
+ else {
+ ene_sd_init(us);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int sd_scsi_inquiry(struct us_data *us, struct scsi_cmnd *srb)
+{
+ unsigned char data_ptr[36] = {
+ 0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55,
+ 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61,
+ 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30 };
+
+ usb_stor_set_xfer_buf(data_ptr, 36, srb);
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int sd_scsi_mode_sense(struct us_data *us, struct scsi_cmnd *srb)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ unsigned char mediaNoWP[12] = {
+ 0x0b, 0x00, 0x00, 0x08, 0x00, 0x00,
+ 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
+ unsigned char mediaWP[12] = {
+ 0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
+ 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
+
+ if (info->SD_Status.WtP)
+ usb_stor_set_xfer_buf(mediaWP, 12, srb);
+ else
+ usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
+
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int sd_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb)
+{
+ u32 bl_num;
+ u32 bl_len;
+ unsigned int offset = 0;
+ unsigned char buf[8];
+ struct scatterlist *sg = NULL;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ usb_stor_dbg(us, "sd_scsi_read_capacity\n");
+ if (info->SD_Status.HiCapacity) {
+ bl_len = 0x200;
+ if (info->SD_Status.IsMMC)
+ bl_num = info->HC_C_SIZE-1;
+ else
+ bl_num = (info->HC_C_SIZE + 1) * 1024 - 1;
+ } else {
+ bl_len = 1 << (info->SD_READ_BL_LEN);
+ bl_num = info->SD_Block_Mult * (info->SD_C_SIZE + 1)
+ * (1 << (info->SD_C_SIZE_MULT + 2)) - 1;
+ }
+ info->bl_num = bl_num;
+ usb_stor_dbg(us, "bl_len = %x\n", bl_len);
+ usb_stor_dbg(us, "bl_num = %x\n", bl_num);
+
+ /*srb->request_bufflen = 8; */
+ buf[0] = (bl_num >> 24) & 0xff;
+ buf[1] = (bl_num >> 16) & 0xff;
+ buf[2] = (bl_num >> 8) & 0xff;
+ buf[3] = (bl_num >> 0) & 0xff;
+ buf[4] = (bl_len >> 24) & 0xff;
+ buf[5] = (bl_len >> 16) & 0xff;
+ buf[6] = (bl_len >> 8) & 0xff;
+ buf[7] = (bl_len >> 0) & 0xff;
+
+ usb_stor_access_xfer_buf(buf, 8, srb, &sg, &offset, TO_XFER_BUF);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int sd_scsi_read(struct us_data *us, struct scsi_cmnd *srb)
+{
+ int result;
+ unsigned char *cdb = srb->cmnd;
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ u32 bn = ((cdb[2] << 24) & 0xff000000) | ((cdb[3] << 16) & 0x00ff0000) |
+ ((cdb[4] << 8) & 0x0000ff00) | ((cdb[5] << 0) & 0x000000ff);
+ u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff);
+ u32 bnByte = bn * 0x200;
+ u32 blenByte = blen * 0x200;
+
+ if (bn > info->bl_num)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ result = ene_load_bincode(us, SD_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Load SD RW pattern Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (info->SD_Status.HiCapacity)
+ bnByte = bn;
+
+ /* set up the command wrapper */
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = blenByte;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF1;
+ bcb->CDB[5] = (unsigned char)(bnByte);
+ bcb->CDB[4] = (unsigned char)(bnByte>>8);
+ bcb->CDB[3] = (unsigned char)(bnByte>>16);
+ bcb->CDB[2] = (unsigned char)(bnByte>>24);
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, scsi_sglist(srb), 1);
+ return result;
+}
+
+static int sd_scsi_write(struct us_data *us, struct scsi_cmnd *srb)
+{
+ int result;
+ unsigned char *cdb = srb->cmnd;
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ u32 bn = ((cdb[2] << 24) & 0xff000000) | ((cdb[3] << 16) & 0x00ff0000) |
+ ((cdb[4] << 8) & 0x0000ff00) | ((cdb[5] << 0) & 0x000000ff);
+ u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff);
+ u32 bnByte = bn * 0x200;
+ u32 blenByte = blen * 0x200;
+
+ if (bn > info->bl_num)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ result = ene_load_bincode(us, SD_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Load SD RW pattern Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (info->SD_Status.HiCapacity)
+ bnByte = bn;
+
+ /* set up the command wrapper */
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = blenByte;
+ bcb->Flags = 0x00;
+ bcb->CDB[0] = 0xF0;
+ bcb->CDB[5] = (unsigned char)(bnByte);
+ bcb->CDB[4] = (unsigned char)(bnByte>>8);
+ bcb->CDB[3] = (unsigned char)(bnByte>>16);
+ bcb->CDB[2] = (unsigned char)(bnByte>>24);
+
+ result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1);
+ return result;
+}
+
+/*
+ * ENE MS Card
+ */
+
+static int ms_lib_set_logicalpair(struct us_data *us, u16 logblk, u16 phyblk)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ if ((logblk >= info->MS_Lib.NumberOfLogBlock) || (phyblk >= info->MS_Lib.NumberOfPhyBlock))
+ return (u32)-1;
+
+ info->MS_Lib.Phy2LogMap[phyblk] = logblk;
+ info->MS_Lib.Log2PhyMap[logblk] = phyblk;
+
+ return 0;
+}
+
+static int ms_lib_set_logicalblockmark(struct us_data *us, u16 phyblk, u16 mark)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+ return (u32)-1;
+
+ info->MS_Lib.Phy2LogMap[phyblk] = mark;
+
+ return 0;
+}
+
+static int ms_lib_set_initialerrorblock(struct us_data *us, u16 phyblk)
+{
+ return ms_lib_set_logicalblockmark(us, phyblk, MS_LB_INITIAL_ERROR);
+}
+
+static int ms_lib_set_bootblockmark(struct us_data *us, u16 phyblk)
+{
+ return ms_lib_set_logicalblockmark(us, phyblk, MS_LB_BOOT_BLOCK);
+}
+
+static int ms_lib_free_logicalmap(struct us_data *us)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ kfree(info->MS_Lib.Phy2LogMap);
+ info->MS_Lib.Phy2LogMap = NULL;
+
+ kfree(info->MS_Lib.Log2PhyMap);
+ info->MS_Lib.Log2PhyMap = NULL;
+
+ return 0;
+}
+
+static int ms_lib_alloc_logicalmap(struct us_data *us)
+{
+ u32 i;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ info->MS_Lib.Phy2LogMap = kmalloc(info->MS_Lib.NumberOfPhyBlock * sizeof(u16), GFP_KERNEL);
+ info->MS_Lib.Log2PhyMap = kmalloc(info->MS_Lib.NumberOfLogBlock * sizeof(u16), GFP_KERNEL);
+
+ if ((info->MS_Lib.Phy2LogMap == NULL) || (info->MS_Lib.Log2PhyMap == NULL)) {
+ ms_lib_free_logicalmap(us);
+ return (u32)-1;
+ }
+
+ for (i = 0; i < info->MS_Lib.NumberOfPhyBlock; i++)
+ info->MS_Lib.Phy2LogMap[i] = MS_LB_NOT_USED;
+
+ for (i = 0; i < info->MS_Lib.NumberOfLogBlock; i++)
+ info->MS_Lib.Log2PhyMap[i] = MS_LB_NOT_USED;
+
+ return 0;
+}
+
+static void ms_lib_clear_writebuf(struct us_data *us)
+{
+ int i;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ info->MS_Lib.wrtblk = (u16)-1;
+ ms_lib_clear_pagemap(info);
+
+ if (info->MS_Lib.blkpag)
+ memset(info->MS_Lib.blkpag, 0xff, info->MS_Lib.PagesPerBlock * info->MS_Lib.BytesPerSector);
+
+ if (info->MS_Lib.blkext) {
+ for (i = 0; i < info->MS_Lib.PagesPerBlock; i++) {
+ info->MS_Lib.blkext[i].status1 = MS_REG_ST1_DEFAULT;
+ info->MS_Lib.blkext[i].ovrflg = MS_REG_OVR_DEFAULT;
+ info->MS_Lib.blkext[i].mngflg = MS_REG_MNG_DEFAULT;
+ info->MS_Lib.blkext[i].logadr = MS_LB_NOT_USED;
+ }
+ }
+}
+
+static int ms_count_freeblock(struct us_data *us, u16 PhyBlock)
+{
+ u32 Ende, Count;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ Ende = PhyBlock + MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+ for (Count = 0; PhyBlock < Ende; PhyBlock++) {
+ switch (info->MS_Lib.Phy2LogMap[PhyBlock]) {
+ case MS_LB_NOT_USED:
+ case MS_LB_NOT_USED_ERASED:
+ Count++;
+ default:
+ break;
+ }
+ }
+
+ return Count;
+}
+
+static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr,
+ u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ int result;
+ u8 ExtBuf[4];
+ u32 bn = PhyBlockAddr * 0x20 + PageNum;
+
+ /* printk(KERN_INFO "MS --- MS_ReaderReadPage,
+ PhyBlockAddr = %x, PageNum = %x\n", PhyBlockAddr, PageNum); */
+
+ result = ene_load_bincode(us, MS_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* Read Page Data */
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x200;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF1;
+
+ bcb->CDB[1] = 0x02; /* in init.c ENE_MSInit() is 0x01 */
+
+ bcb->CDB[5] = (unsigned char)(bn);
+ bcb->CDB[4] = (unsigned char)(bn>>8);
+ bcb->CDB[3] = (unsigned char)(bn>>16);
+ bcb->CDB[2] = (unsigned char)(bn>>24);
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, PageBuf, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+
+ /* Read Extra Data */
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x4;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF1;
+ bcb->CDB[1] = 0x03;
+
+ bcb->CDB[5] = (unsigned char)(PageNum);
+ bcb->CDB[4] = (unsigned char)(PhyBlockAddr);
+ bcb->CDB[3] = (unsigned char)(PhyBlockAddr>>8);
+ bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16);
+ bcb->CDB[6] = 0x01;
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ ExtraDat->reserved = 0;
+ ExtraDat->intr = 0x80; /* Not yet,fireware support */
+ ExtraDat->status0 = 0x10; /* Not yet,fireware support */
+
+ ExtraDat->status1 = 0x00; /* Not yet,fireware support */
+ ExtraDat->ovrflg = ExtBuf[0];
+ ExtraDat->mngflg = ExtBuf[1];
+ ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_lib_process_bootblock(struct us_data *us, u16 PhyBlock, u8 *PageData)
+{
+ struct ms_bootblock_sysent *SysEntry;
+ struct ms_bootblock_sysinf *SysInfo;
+ u32 i, result;
+ u8 PageNumber;
+ u8 *PageBuffer;
+ struct ms_lib_type_extdat ExtraData;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ PageBuffer = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL);
+ if (PageBuffer == NULL)
+ return (u32)-1;
+
+ result = (u32)-1;
+
+ SysInfo = &(((struct ms_bootblock_page0 *)PageData)->sysinf);
+
+ if ((SysInfo->bMsClass != MS_SYSINF_MSCLASS_TYPE_1) ||
+ (be16_to_cpu(SysInfo->wPageSize) != MS_SYSINF_PAGE_SIZE) ||
+ ((SysInfo->bSecuritySupport & MS_SYSINF_SECURITY) == MS_SYSINF_SECURITY_SUPPORT) ||
+ (SysInfo->bReserved1 != MS_SYSINF_RESERVED1) ||
+ (SysInfo->bReserved2 != MS_SYSINF_RESERVED2) ||
+ (SysInfo->bFormatType != MS_SYSINF_FORMAT_FAT) ||
+ (SysInfo->bUsage != MS_SYSINF_USAGE_GENERAL))
+ goto exit;
+ /* */
+ switch (info->MS_Lib.cardType = SysInfo->bCardType) {
+ case MS_SYSINF_CARDTYPE_RDONLY:
+ ms_lib_ctrl_set(info, MS_LIB_CTRL_RDONLY);
+ break;
+ case MS_SYSINF_CARDTYPE_RDWR:
+ ms_lib_ctrl_reset(info, MS_LIB_CTRL_RDONLY);
+ break;
+ case MS_SYSINF_CARDTYPE_HYBRID:
+ default:
+ goto exit;
+ }
+
+ info->MS_Lib.blockSize = be16_to_cpu(SysInfo->wBlockSize);
+ info->MS_Lib.NumberOfPhyBlock = be16_to_cpu(SysInfo->wBlockNumber);
+ info->MS_Lib.NumberOfLogBlock = be16_to_cpu(SysInfo->wTotalBlockNumber)-2;
+ info->MS_Lib.PagesPerBlock = info->MS_Lib.blockSize * SIZE_OF_KIRO / MS_BYTES_PER_PAGE;
+ info->MS_Lib.NumberOfSegment = info->MS_Lib.NumberOfPhyBlock / MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+ info->MS_Model = be16_to_cpu(SysInfo->wMemorySize);
+
+ /*Allocate to all number of logicalblock and physicalblock */
+ if (ms_lib_alloc_logicalmap(us))
+ goto exit;
+
+ /* Mark the book block */
+ ms_lib_set_bootblockmark(us, PhyBlock);
+
+ SysEntry = &(((struct ms_bootblock_page0 *)PageData)->sysent);
+
+ for (i = 0; i < MS_NUMBER_OF_SYSTEM_ENTRY; i++) {
+ u32 EntryOffset, EntrySize;
+
+ EntryOffset = be32_to_cpu(SysEntry->entry[i].dwStart);
+
+ if (EntryOffset == 0xffffff)
+ continue;
+ EntrySize = be32_to_cpu(SysEntry->entry[i].dwSize);
+
+ if (EntrySize == 0)
+ continue;
+
+ if (EntryOffset + MS_BYTES_PER_PAGE + EntrySize > info->MS_Lib.blockSize * (u32)SIZE_OF_KIRO)
+ continue;
+
+ if (i == 0) {
+ u8 PrevPageNumber = 0;
+ u16 phyblk;
+
+ if (SysEntry->entry[i].bType != MS_SYSENT_TYPE_INVALID_BLOCK)
+ goto exit;
+
+ while (EntrySize > 0) {
+
+ PageNumber = (u8)(EntryOffset / MS_BYTES_PER_PAGE + 1);
+ if (PageNumber != PrevPageNumber) {
+ switch (ms_read_readpage(us, PhyBlock, PageNumber, (u32 *)PageBuffer, &ExtraData)) {
+ case MS_STATUS_SUCCESS:
+ break;
+ case MS_STATUS_WRITE_PROTECT:
+ case MS_ERROR_FLASH_READ:
+ case MS_STATUS_ERROR:
+ default:
+ goto exit;
+ }
+
+ PrevPageNumber = PageNumber;
+ }
+
+ phyblk = be16_to_cpu(*(u16 *)(PageBuffer + (EntryOffset % MS_BYTES_PER_PAGE)));
+ if (phyblk < 0x0fff)
+ ms_lib_set_initialerrorblock(us, phyblk);
+
+ EntryOffset += 2;
+ EntrySize -= 2;
+ }
+ } else if (i == 1) { /* CIS/IDI */
+ struct ms_bootblock_idi *idi;
+
+ if (SysEntry->entry[i].bType != MS_SYSENT_TYPE_CIS_IDI)
+ goto exit;
+
+ switch (ms_read_readpage(us, PhyBlock, (u8)(EntryOffset / MS_BYTES_PER_PAGE + 1), (u32 *)PageBuffer, &ExtraData)) {
+ case MS_STATUS_SUCCESS:
+ break;
+ case MS_STATUS_WRITE_PROTECT:
+ case MS_ERROR_FLASH_READ:
+ case MS_STATUS_ERROR:
+ default:
+ goto exit;
+ }
+
+ idi = &((struct ms_bootblock_cis_idi *)(PageBuffer + (EntryOffset % MS_BYTES_PER_PAGE)))->idi.idi;
+ if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF)
+ goto exit;
+
+ info->MS_Lib.BytesPerSector = le16_to_cpu(idi->wIDIbytesPerSector);
+ if (info->MS_Lib.BytesPerSector != MS_BYTES_PER_PAGE)
+ goto exit;
+ }
+ } /* End for .. */
+
+ result = 0;
+
+exit:
+ if (result)
+ ms_lib_free_logicalmap(us);
+
+ kfree(PageBuffer);
+
+ result = 0;
+ return result;
+}
+
+static void ms_lib_free_writebuf(struct us_data *us)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ info->MS_Lib.wrtblk = (u16)-1; /* set to -1 */
+
+ /* memset((fdoExt)->MS_Lib.pagemap, 0, sizeof((fdoExt)->MS_Lib.pagemap)) */
+
+ ms_lib_clear_pagemap(info); /* (pdx)->MS_Lib.pagemap memset 0 in ms.h */
+
+ if (info->MS_Lib.blkpag) {
+ kfree((u8 *)(info->MS_Lib.blkpag)); /* Arnold test ... */
+ info->MS_Lib.blkpag = NULL;
+ }
+
+ if (info->MS_Lib.blkext) {
+ kfree((u8 *)(info->MS_Lib.blkext)); /* Arnold test ... */
+ info->MS_Lib.blkext = NULL;
+ }
+}
+
+
+static void ms_lib_free_allocatedarea(struct us_data *us)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ ms_lib_free_writebuf(us); /* Free MS_Lib.pagemap */
+ ms_lib_free_logicalmap(us); /* kfree MS_Lib.Phy2LogMap and MS_Lib.Log2PhyMap */
+
+ /* set struct us point flag to 0 */
+ info->MS_Lib.flags = 0;
+ info->MS_Lib.BytesPerSector = 0;
+ info->MS_Lib.SectorsPerCylinder = 0;
+
+ info->MS_Lib.cardType = 0;
+ info->MS_Lib.blockSize = 0;
+ info->MS_Lib.PagesPerBlock = 0;
+
+ info->MS_Lib.NumberOfPhyBlock = 0;
+ info->MS_Lib.NumberOfLogBlock = 0;
+}
+
+
+static int ms_lib_alloc_writebuf(struct us_data *us)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ info->MS_Lib.wrtblk = (u16)-1;
+
+ info->MS_Lib.blkpag = kmalloc(info->MS_Lib.PagesPerBlock * info->MS_Lib.BytesPerSector, GFP_KERNEL);
+ info->MS_Lib.blkext = kmalloc(info->MS_Lib.PagesPerBlock * sizeof(struct ms_lib_type_extdat), GFP_KERNEL);
+
+ if ((info->MS_Lib.blkpag == NULL) || (info->MS_Lib.blkext == NULL)) {
+ ms_lib_free_writebuf(us);
+ return (u32)-1;
+ }
+
+ ms_lib_clear_writebuf(us);
+
+return 0;
+}
+
+static int ms_lib_force_setlogical_pair(struct us_data *us, u16 logblk, u16 phyblk)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ if (logblk == MS_LB_NOT_USED)
+ return 0;
+
+ if ((logblk >= info->MS_Lib.NumberOfLogBlock) ||
+ (phyblk >= info->MS_Lib.NumberOfPhyBlock))
+ return (u32)-1;
+
+ info->MS_Lib.Phy2LogMap[phyblk] = logblk;
+ info->MS_Lib.Log2PhyMap[logblk] = phyblk;
+
+ return 0;
+}
+
+static int ms_read_copyblock(struct us_data *us, u16 oldphy, u16 newphy,
+ u16 PhyBlockAddr, u8 PageNum, unsigned char *buf, u16 len)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ int result;
+
+ /* printk(KERN_INFO "MS_ReaderCopyBlock --- PhyBlockAddr = %x,
+ PageNum = %x\n", PhyBlockAddr, PageNum); */
+ result = ene_load_bincode(us, MS_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x200*len;
+ bcb->Flags = 0x00;
+ bcb->CDB[0] = 0xF0;
+ bcb->CDB[1] = 0x08;
+ bcb->CDB[4] = (unsigned char)(oldphy);
+ bcb->CDB[3] = (unsigned char)(oldphy>>8);
+ bcb->CDB[2] = 0; /* (BYTE)(oldphy>>16) */
+ bcb->CDB[7] = (unsigned char)(newphy);
+ bcb->CDB[6] = (unsigned char)(newphy>>8);
+ bcb->CDB[5] = 0; /* (BYTE)(newphy>>16) */
+ bcb->CDB[9] = (unsigned char)(PhyBlockAddr);
+ bcb->CDB[8] = (unsigned char)(PhyBlockAddr>>8);
+ bcb->CDB[10] = PageNum;
+
+ result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_read_eraseblock(struct us_data *us, u32 PhyBlockAddr)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ int result;
+ u32 bn = PhyBlockAddr;
+
+ /* printk(KERN_INFO "MS --- ms_read_eraseblock,
+ PhyBlockAddr = %x\n", PhyBlockAddr); */
+ result = ene_load_bincode(us, MS_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x200;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF2;
+ bcb->CDB[1] = 0x06;
+ bcb->CDB[4] = (unsigned char)(bn);
+ bcb->CDB[3] = (unsigned char)(bn>>8);
+ bcb->CDB[2] = (unsigned char)(bn>>16);
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_lib_check_disableblock(struct us_data *us, u16 PhyBlock)
+{
+ unsigned char *PageBuf = NULL;
+ u16 result = MS_STATUS_SUCCESS;
+ u16 blk, index = 0;
+ struct ms_lib_type_extdat extdat;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ PageBuf = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL);
+ if (PageBuf == NULL) {
+ result = MS_NO_MEMORY_ERROR;
+ goto exit;
+ }
+
+ ms_read_readpage(us, PhyBlock, 1, (u32 *)PageBuf, &extdat);
+ do {
+ blk = be16_to_cpu(PageBuf[index]);
+ if (blk == MS_LB_NOT_USED)
+ break;
+ if (blk == info->MS_Lib.Log2PhyMap[0]) {
+ result = MS_ERROR_FLASH_READ;
+ break;
+ }
+ index++;
+ } while (1);
+
+exit:
+ kfree(PageBuf);
+ return result;
+}
+
+static int ms_lib_setacquired_errorblock(struct us_data *us, u16 phyblk)
+{
+ u16 log;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+ return (u32)-1;
+
+ log = info->MS_Lib.Phy2LogMap[phyblk];
+
+ if (log < info->MS_Lib.NumberOfLogBlock)
+ info->MS_Lib.Log2PhyMap[log] = MS_LB_NOT_USED;
+
+ if (info->MS_Lib.Phy2LogMap[phyblk] != MS_LB_INITIAL_ERROR)
+ info->MS_Lib.Phy2LogMap[phyblk] = MS_LB_ACQUIRED_ERROR;
+
+ return 0;
+}
+
+static int ms_lib_overwrite_extra(struct us_data *us, u32 PhyBlockAddr,
+ u8 PageNum, u8 OverwriteFlag)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ int result;
+
+ /* printk("MS --- MS_LibOverwriteExtra,
+ PhyBlockAddr = %x, PageNum = %x\n", PhyBlockAddr, PageNum); */
+ result = ene_load_bincode(us, MS_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x4;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF2;
+ bcb->CDB[1] = 0x05;
+ bcb->CDB[5] = (unsigned char)(PageNum);
+ bcb->CDB[4] = (unsigned char)(PhyBlockAddr);
+ bcb->CDB[3] = (unsigned char)(PhyBlockAddr>>8);
+ bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16);
+ bcb->CDB[6] = OverwriteFlag;
+ bcb->CDB[7] = 0xFF;
+ bcb->CDB[8] = 0xFF;
+ bcb->CDB[9] = 0xFF;
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_lib_error_phyblock(struct us_data *us, u16 phyblk)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+ return MS_STATUS_ERROR;
+
+ ms_lib_setacquired_errorblock(us, phyblk);
+
+ if (ms_lib_iswritable(info))
+ return ms_lib_overwrite_extra(us, phyblk, 0, (u8)(~MS_REG_OVR_BKST & BYTE_MASK));
+
+ return MS_STATUS_SUCCESS;
+}
+
+static int ms_lib_erase_phyblock(struct us_data *us, u16 phyblk)
+{
+ u16 log;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+ return MS_STATUS_ERROR;
+
+ log = info->MS_Lib.Phy2LogMap[phyblk];
+
+ if (log < info->MS_Lib.NumberOfLogBlock)
+ info->MS_Lib.Log2PhyMap[log] = MS_LB_NOT_USED;
+
+ info->MS_Lib.Phy2LogMap[phyblk] = MS_LB_NOT_USED;
+
+ if (ms_lib_iswritable(info)) {
+ switch (ms_read_eraseblock(us, phyblk)) {
+ case MS_STATUS_SUCCESS:
+ info->MS_Lib.Phy2LogMap[phyblk] = MS_LB_NOT_USED_ERASED;
+ return MS_STATUS_SUCCESS;
+ case MS_ERROR_FLASH_ERASE:
+ case MS_STATUS_INT_ERROR:
+ ms_lib_error_phyblock(us, phyblk);
+ return MS_ERROR_FLASH_ERASE;
+ case MS_STATUS_ERROR:
+ default:
+ ms_lib_ctrl_set(info, MS_LIB_CTRL_RDONLY); /* MS_LibCtrlSet will used by ENE_MSInit ,need check, and why us to info*/
+ ms_lib_setacquired_errorblock(us, phyblk);
+ return MS_STATUS_ERROR;
+ }
+ }
+
+ ms_lib_setacquired_errorblock(us, phyblk);
+
+ return MS_STATUS_SUCCESS;
+}
+
+static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock,
+ u8 PageNum, struct ms_lib_type_extdat *ExtraDat)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ int result;
+ u8 ExtBuf[4];
+
+ /* printk("MS_LibReadExtra --- PhyBlock = %x, PageNum = %x\n", PhyBlock, PageNum); */
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x4;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF1;
+ bcb->CDB[1] = 0x03;
+ bcb->CDB[5] = (unsigned char)(PageNum);
+ bcb->CDB[4] = (unsigned char)(PhyBlock);
+ bcb->CDB[3] = (unsigned char)(PhyBlock>>8);
+ bcb->CDB[2] = (unsigned char)(PhyBlock>>16);
+ bcb->CDB[6] = 0x01;
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ ExtraDat->reserved = 0;
+ ExtraDat->intr = 0x80; /* Not yet, waiting for fireware support */
+ ExtraDat->status0 = 0x10; /* Not yet, waiting for fireware support */
+ ExtraDat->status1 = 0x00; /* Not yet, waiting for fireware support */
+ ExtraDat->ovrflg = ExtBuf[0];
+ ExtraDat->mngflg = ExtBuf[1];
+ ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_libsearch_block_from_physical(struct us_data *us, u16 phyblk)
+{
+ u16 Newblk;
+ u16 blk;
+ struct ms_lib_type_extdat extdat; /* need check */
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+
+ if (phyblk >= info->MS_Lib.NumberOfPhyBlock)
+ return MS_LB_ERROR;
+
+ for (blk = phyblk + 1; blk != phyblk; blk++) {
+ if ((blk & MS_PHYSICAL_BLOCKS_PER_SEGMENT_MASK) == 0)
+ blk -= MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+
+ Newblk = info->MS_Lib.Phy2LogMap[blk];
+ if (info->MS_Lib.Phy2LogMap[blk] == MS_LB_NOT_USED_ERASED) {
+ return blk;
+ } else if (info->MS_Lib.Phy2LogMap[blk] == MS_LB_NOT_USED) {
+ switch (ms_lib_read_extra(us, blk, 0, &extdat)) {
+ case MS_STATUS_SUCCESS:
+ case MS_STATUS_SUCCESS_WITH_ECC:
+ break;
+ case MS_NOCARD_ERROR:
+ return MS_NOCARD_ERROR;
+ case MS_STATUS_INT_ERROR:
+ return MS_LB_ERROR;
+ case MS_ERROR_FLASH_READ:
+ default:
+ ms_lib_setacquired_errorblock(us, blk);
+ continue;
+ } /* End switch */
+
+ if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
+ ms_lib_setacquired_errorblock(us, blk);
+ continue;
+ }
+
+ switch (ms_lib_erase_phyblock(us, blk)) {
+ case MS_STATUS_SUCCESS:
+ return blk;
+ case MS_STATUS_ERROR:
+ return MS_LB_ERROR;
+ case MS_ERROR_FLASH_ERASE:
+ default:
+ ms_lib_error_phyblock(us, blk);
+ break;
+ }
+ }
+ } /* End for */
+
+ return MS_LB_ERROR;
+}
+static int ms_libsearch_block_from_logical(struct us_data *us, u16 logblk)
+{
+ u16 phyblk;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ phyblk = ms_libconv_to_physical(info, logblk);
+ if (phyblk >= MS_LB_ERROR) {
+ if (logblk >= info->MS_Lib.NumberOfLogBlock)
+ return MS_LB_ERROR;
+
+ phyblk = (logblk + MS_NUMBER_OF_BOOT_BLOCK) / MS_LOGICAL_BLOCKS_PER_SEGMENT;
+ phyblk *= MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+ phyblk += MS_PHYSICAL_BLOCKS_PER_SEGMENT - 1;
+ }
+
+ return ms_libsearch_block_from_physical(us, phyblk);
+}
+
+static int ms_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+
+ /* pr_info("MS_SCSI_Test_Unit_Ready\n"); */
+ if (info->MS_Status.Insert && info->MS_Status.Ready) {
+ return USB_STOR_TRANSPORT_GOOD;
+ } else {
+ ene_ms_init(us);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_scsi_inquiry(struct us_data *us, struct scsi_cmnd *srb)
+{
+ /* pr_info("MS_SCSI_Inquiry\n"); */
+ unsigned char data_ptr[36] = {
+ 0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55,
+ 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61,
+ 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30};
+
+ usb_stor_set_xfer_buf(data_ptr, 36, srb);
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_scsi_mode_sense(struct us_data *us, struct scsi_cmnd *srb)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ unsigned char mediaNoWP[12] = {
+ 0x0b, 0x00, 0x00, 0x08, 0x00, 0x00,
+ 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
+ unsigned char mediaWP[12] = {
+ 0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
+ 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
+
+ if (info->MS_Status.WtP)
+ usb_stor_set_xfer_buf(mediaWP, 12, srb);
+ else
+ usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb)
+{
+ u32 bl_num;
+ u16 bl_len;
+ unsigned int offset = 0;
+ unsigned char buf[8];
+ struct scatterlist *sg = NULL;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ usb_stor_dbg(us, "ms_scsi_read_capacity\n");
+ bl_len = 0x200;
+ if (info->MS_Status.IsMSPro)
+ bl_num = info->MSP_TotalBlock - 1;
+ else
+ bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1;
+
+ info->bl_num = bl_num;
+ usb_stor_dbg(us, "bl_len = %x\n", bl_len);
+ usb_stor_dbg(us, "bl_num = %x\n", bl_num);
+
+ /*srb->request_bufflen = 8; */
+ buf[0] = (bl_num >> 24) & 0xff;
+ buf[1] = (bl_num >> 16) & 0xff;
+ buf[2] = (bl_num >> 8) & 0xff;
+ buf[3] = (bl_num >> 0) & 0xff;
+ buf[4] = (bl_len >> 24) & 0xff;
+ buf[5] = (bl_len >> 16) & 0xff;
+ buf[6] = (bl_len >> 8) & 0xff;
+ buf[7] = (bl_len >> 0) & 0xff;
+
+ usb_stor_access_xfer_buf(buf, 8, srb, &sg, &offset, TO_XFER_BUF);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static void ms_lib_phy_to_log_range(u16 PhyBlock, u16 *LogStart, u16 *LogEnde)
+{
+ PhyBlock /= MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+
+ if (PhyBlock) {
+ *LogStart = MS_LOGICAL_BLOCKS_IN_1ST_SEGMENT + (PhyBlock - 1) * MS_LOGICAL_BLOCKS_PER_SEGMENT;/*496*/
+ *LogEnde = *LogStart + MS_LOGICAL_BLOCKS_PER_SEGMENT;/*496*/
+ } else {
+ *LogStart = 0;
+ *LogEnde = MS_LOGICAL_BLOCKS_IN_1ST_SEGMENT;/*494*/
+ }
+}
+
+static int ms_lib_read_extrablock(struct us_data *us, u32 PhyBlock,
+ u8 PageNum, u8 blen, void *buf)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ int result;
+
+ /* printk("MS_LibReadExtraBlock --- PhyBlock = %x,
+ PageNum = %x, blen = %x\n", PhyBlock, PageNum, blen); */
+
+ /* Read Extra Data */
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x4 * blen;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF1;
+ bcb->CDB[1] = 0x03;
+ bcb->CDB[5] = (unsigned char)(PageNum);
+ bcb->CDB[4] = (unsigned char)(PhyBlock);
+ bcb->CDB[3] = (unsigned char)(PhyBlock>>8);
+ bcb->CDB[2] = (unsigned char)(PhyBlock>>16);
+ bcb->CDB[6] = blen;
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, buf, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ms_lib_scan_logicalblocknumber(struct us_data *us, u16 btBlk1st)
+{
+ u16 PhyBlock, newblk, i;
+ u16 LogStart, LogEnde;
+ struct ms_lib_type_extdat extdat;
+ u8 buf[0x200];
+ u32 count = 0, index = 0;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) {
+ ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde);
+
+ for (i = 0; i < MS_PHYSICAL_BLOCKS_PER_SEGMENT; i++, PhyBlock++) {
+ switch (ms_libconv_to_logical(info, PhyBlock)) {
+ case MS_STATUS_ERROR:
+ continue;
+ default:
+ break;
+ }
+
+ if (count == PhyBlock) {
+ ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf);
+ count += 0x80;
+ }
+ index = (PhyBlock % 0x80) * 4;
+
+ extdat.ovrflg = buf[index];
+ extdat.mngflg = buf[index+1];
+ extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]);
+
+ if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
+ ms_lib_setacquired_errorblock(us, PhyBlock);
+ continue;
+ }
+
+ if ((extdat.mngflg & MS_REG_MNG_ATFLG) == MS_REG_MNG_ATFLG_ATTBL) {
+ ms_lib_erase_phyblock(us, PhyBlock);
+ continue;
+ }
+
+ if (extdat.logadr != MS_LB_NOT_USED) {
+ if ((extdat.logadr < LogStart) || (LogEnde <= extdat.logadr)) {
+ ms_lib_erase_phyblock(us, PhyBlock);
+ continue;
+ }
+
+ newblk = ms_libconv_to_physical(info, extdat.logadr);
+
+ if (newblk != MS_LB_NOT_USED) {
+ if (extdat.logadr == 0) {
+ ms_lib_set_logicalpair(us, extdat.logadr, PhyBlock);
+ if (ms_lib_check_disableblock(us, btBlk1st)) {
+ ms_lib_set_logicalpair(us, extdat.logadr, newblk);
+ continue;
+ }
+ }
+
+ ms_lib_read_extra(us, newblk, 0, &extdat);
+ if ((extdat.ovrflg & MS_REG_OVR_UDST) == MS_REG_OVR_UDST_UPDATING) {
+ ms_lib_erase_phyblock(us, PhyBlock);
+ continue;
+ } else {
+ ms_lib_erase_phyblock(us, newblk);
+ }
+ }
+
+ ms_lib_set_logicalpair(us, extdat.logadr, PhyBlock);
+ }
+ }
+ } /* End for ... */
+
+ return MS_STATUS_SUCCESS;
+}
+
+
+static int ms_scsi_read(struct us_data *us, struct scsi_cmnd *srb)
+{
+ int result;
+ unsigned char *cdb = srb->cmnd;
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ u32 bn = ((cdb[2] << 24) & 0xff000000) | ((cdb[3] << 16) & 0x00ff0000) |
+ ((cdb[4] << 8) & 0x0000ff00) | ((cdb[5] << 0) & 0x000000ff);
+ u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff);
+ u32 blenByte = blen * 0x200;
+
+ if (bn > info->bl_num)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (info->MS_Status.IsMSPro) {
+ result = ene_load_bincode(us, MSP_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* set up the command wrapper */
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = blenByte;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF1;
+ bcb->CDB[1] = 0x02;
+ bcb->CDB[5] = (unsigned char)(bn);
+ bcb->CDB[4] = (unsigned char)(bn>>8);
+ bcb->CDB[3] = (unsigned char)(bn>>16);
+ bcb->CDB[2] = (unsigned char)(bn>>24);
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, scsi_sglist(srb), 1);
+ } else {
+ void *buf;
+ int offset = 0;
+ u16 phyblk, logblk;
+ u8 PageNum;
+ u16 len;
+ u32 blkno;
+
+ buf = kmalloc(blenByte, GFP_KERNEL);
+ if (buf == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ result = ene_load_bincode(us, MS_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD) {
+ pr_info("Load MS RW pattern Fail !!\n");
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto exit;
+ }
+
+ logblk = (u16)(bn / info->MS_Lib.PagesPerBlock);
+ PageNum = (u8)(bn % info->MS_Lib.PagesPerBlock);
+
+ while (1) {
+ if (blen > (info->MS_Lib.PagesPerBlock-PageNum))
+ len = info->MS_Lib.PagesPerBlock-PageNum;
+ else
+ len = blen;
+
+ phyblk = ms_libconv_to_physical(info, logblk);
+ blkno = phyblk * 0x20 + PageNum;
+
+ /* set up the command wrapper */
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x200 * len;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF1;
+ bcb->CDB[1] = 0x02;
+ bcb->CDB[5] = (unsigned char)(blkno);
+ bcb->CDB[4] = (unsigned char)(blkno>>8);
+ bcb->CDB[3] = (unsigned char)(blkno>>16);
+ bcb->CDB[2] = (unsigned char)(blkno>>24);
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, buf+offset, 0);
+ if (result != USB_STOR_XFER_GOOD) {
+ pr_info("MS_SCSI_Read --- result = %x\n", result);
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto exit;
+ }
+
+ blen -= len;
+ if (blen <= 0)
+ break;
+ logblk++;
+ PageNum = 0;
+ offset += MS_BYTES_PER_PAGE*len;
+ }
+ usb_stor_set_xfer_buf(buf, blenByte, srb);
+exit:
+ kfree(buf);
+ }
+ return result;
+}
+
+static int ms_scsi_write(struct us_data *us, struct scsi_cmnd *srb)
+{
+ int result;
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ unsigned char *cdb = srb->cmnd;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ u32 bn = ((cdb[2] << 24) & 0xff000000) |
+ ((cdb[3] << 16) & 0x00ff0000) |
+ ((cdb[4] << 8) & 0x0000ff00) |
+ ((cdb[5] << 0) & 0x000000ff);
+ u16 blen = ((cdb[7] << 8) & 0xff00) | ((cdb[8] << 0) & 0x00ff);
+ u32 blenByte = blen * 0x200;
+
+ if (bn > info->bl_num)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (info->MS_Status.IsMSPro) {
+ result = ene_load_bincode(us, MSP_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD) {
+ pr_info("Load MSP RW pattern Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* set up the command wrapper */
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = blenByte;
+ bcb->Flags = 0x00;
+ bcb->CDB[0] = 0xF0;
+ bcb->CDB[1] = 0x04;
+ bcb->CDB[5] = (unsigned char)(bn);
+ bcb->CDB[4] = (unsigned char)(bn>>8);
+ bcb->CDB[3] = (unsigned char)(bn>>16);
+ bcb->CDB[2] = (unsigned char)(bn>>24);
+
+ result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1);
+ } else {
+ void *buf;
+ int offset = 0;
+ u16 PhyBlockAddr;
+ u8 PageNum;
+ u16 len, oldphy, newphy;
+
+ buf = kmalloc(blenByte, GFP_KERNEL);
+ if (buf == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+ usb_stor_set_xfer_buf(buf, blenByte, srb);
+
+ result = ene_load_bincode(us, MS_RW_PATTERN);
+ if (result != USB_STOR_XFER_GOOD) {
+ pr_info("Load MS RW pattern Fail !!\n");
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto exit;
+ }
+
+ PhyBlockAddr = (u16)(bn / info->MS_Lib.PagesPerBlock);
+ PageNum = (u8)(bn % info->MS_Lib.PagesPerBlock);
+
+ while (1) {
+ if (blen > (info->MS_Lib.PagesPerBlock-PageNum))
+ len = info->MS_Lib.PagesPerBlock-PageNum;
+ else
+ len = blen;
+
+ oldphy = ms_libconv_to_physical(info, PhyBlockAddr); /* need check us <-> info */
+ newphy = ms_libsearch_block_from_logical(us, PhyBlockAddr);
+
+ result = ms_read_copyblock(us, oldphy, newphy, PhyBlockAddr, PageNum, buf+offset, len);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ pr_info("MS_SCSI_Write --- result = %x\n", result);
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto exit;
+ }
+
+ info->MS_Lib.Phy2LogMap[oldphy] = MS_LB_NOT_USED_ERASED;
+ ms_lib_force_setlogical_pair(us, PhyBlockAddr, newphy);
+
+ blen -= len;
+ if (blen <= 0)
+ break;
+ PhyBlockAddr++;
+ PageNum = 0;
+ offset += MS_BYTES_PER_PAGE*len;
+ }
+exit:
+ kfree(buf);
+ }
+ return result;
+}
+
+/*
+ * ENE MS Card
+ */
+
+static int ene_get_card_type(struct us_data *us, u16 index, void *buf)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ int result;
+
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x01;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xED;
+ bcb->CDB[2] = (unsigned char)(index>>8);
+ bcb->CDB[3] = (unsigned char)index;
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, buf, 0);
+ return result;
+}
+
+static int ene_get_card_status(struct us_data *us, u8 *buf)
+{
+ u16 tmpreg;
+ u32 reg4b;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ /*usb_stor_dbg(us, "transport --- ENE_ReadSDReg\n");*/
+ reg4b = *(u32 *)&buf[0x18];
+ info->SD_READ_BL_LEN = (u8)((reg4b >> 8) & 0x0f);
+
+ tmpreg = (u16) reg4b;
+ reg4b = *(u32 *)(&buf[0x14]);
+ if (info->SD_Status.HiCapacity && !info->SD_Status.IsMMC)
+ info->HC_C_SIZE = (reg4b >> 8) & 0x3fffff;
+
+ info->SD_C_SIZE = ((tmpreg & 0x03) << 10) | (u16)(reg4b >> 22);
+ info->SD_C_SIZE_MULT = (u8)(reg4b >> 7) & 0x07;
+ if (info->SD_Status.HiCapacity && info->SD_Status.IsMMC)
+ info->HC_C_SIZE = *(u32 *)(&buf[0x100]);
+
+ if (info->SD_READ_BL_LEN > SD_BLOCK_LEN) {
+ info->SD_Block_Mult = 1 << (info->SD_READ_BL_LEN-SD_BLOCK_LEN);
+ info->SD_READ_BL_LEN = SD_BLOCK_LEN;
+ } else {
+ info->SD_Block_Mult = 1;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ene_load_bincode(struct us_data *us, unsigned char flag)
+{
+ int err;
+ char *fw_name = NULL;
+ unsigned char *buf = NULL;
+ const struct firmware *sd_fw = NULL;
+ int result = USB_STOR_TRANSPORT_ERROR;
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ if (info->BIN_FLAG == flag)
+ return USB_STOR_TRANSPORT_GOOD;
+
+ switch (flag) {
+ /* For SD */
+ case SD_INIT1_PATTERN:
+ usb_stor_dbg(us, "SD_INIT1_PATTERN\n");
+ fw_name = SD_INIT1_FIRMWARE;
+ break;
+ case SD_INIT2_PATTERN:
+ usb_stor_dbg(us, "SD_INIT2_PATTERN\n");
+ fw_name = SD_INIT2_FIRMWARE;
+ break;
+ case SD_RW_PATTERN:
+ usb_stor_dbg(us, "SD_RW_PATTERN\n");
+ fw_name = SD_RW_FIRMWARE;
+ break;
+ /* For MS */
+ case MS_INIT_PATTERN:
+ usb_stor_dbg(us, "MS_INIT_PATTERN\n");
+ fw_name = MS_INIT_FIRMWARE;
+ break;
+ case MSP_RW_PATTERN:
+ usb_stor_dbg(us, "MSP_RW_PATTERN\n");
+ fw_name = MSP_RW_FIRMWARE;
+ break;
+ case MS_RW_PATTERN:
+ usb_stor_dbg(us, "MS_RW_PATTERN\n");
+ fw_name = MS_RW_FIRMWARE;
+ break;
+ default:
+ usb_stor_dbg(us, "----------- Unknown PATTERN ----------\n");
+ goto nofw;
+ }
+
+ err = reject_firmware(&sd_fw, fw_name, &us->pusb_dev->dev);
+ if (err) {
+ usb_stor_dbg(us, "load firmware %s failed\n", fw_name);
+ goto nofw;
+ }
+ buf = kmemdup(sd_fw->data, sd_fw->size, GFP_KERNEL);
+ if (buf == NULL)
+ goto nofw;
+
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = sd_fw->size;
+ bcb->Flags = 0x00;
+ bcb->CDB[0] = 0xEF;
+
+ result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0);
+ info->BIN_FLAG = flag;
+ kfree(buf);
+
+nofw:
+ release_firmware(sd_fw);
+ return result;
+}
+
+static int ms_card_init(struct us_data *us)
+{
+ u32 result;
+ u16 TmpBlock;
+ unsigned char *PageBuffer0 = NULL, *PageBuffer1 = NULL;
+ struct ms_lib_type_extdat extdat;
+ u16 btBlk1st, btBlk2nd;
+ u32 btBlk1stErred;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ printk(KERN_INFO "MS_CardInit start\n");
+
+ ms_lib_free_allocatedarea(us); /* Clean buffer and set struct us_data flag to 0 */
+
+ /* get two PageBuffer */
+ PageBuffer0 = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL);
+ PageBuffer1 = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL);
+ if ((PageBuffer0 == NULL) || (PageBuffer1 == NULL)) {
+ result = MS_NO_MEMORY_ERROR;
+ goto exit;
+ }
+
+ btBlk1st = btBlk2nd = MS_LB_NOT_USED;
+ btBlk1stErred = 0;
+
+ for (TmpBlock = 0; TmpBlock < MS_MAX_INITIAL_ERROR_BLOCKS+2; TmpBlock++) {
+
+ switch (ms_read_readpage(us, TmpBlock, 0, (u32 *)PageBuffer0, &extdat)) {
+ case MS_STATUS_SUCCESS:
+ break;
+ case MS_STATUS_INT_ERROR:
+ break;
+ case MS_STATUS_ERROR:
+ default:
+ continue;
+ }
+
+ if ((extdat.ovrflg & MS_REG_OVR_BKST) == MS_REG_OVR_BKST_NG)
+ continue;
+
+ if (((extdat.mngflg & MS_REG_MNG_SYSFLG) == MS_REG_MNG_SYSFLG_USER) ||
+ (be16_to_cpu(((struct ms_bootblock_page0 *)PageBuffer0)->header.wBlockID) != MS_BOOT_BLOCK_ID) ||
+ (be16_to_cpu(((struct ms_bootblock_page0 *)PageBuffer0)->header.wFormatVersion) != MS_BOOT_BLOCK_FORMAT_VERSION) ||
+ (((struct ms_bootblock_page0 *)PageBuffer0)->header.bNumberOfDataEntry != MS_BOOT_BLOCK_DATA_ENTRIES))
+ continue;
+
+ if (btBlk1st != MS_LB_NOT_USED) {
+ btBlk2nd = TmpBlock;
+ break;
+ }
+
+ btBlk1st = TmpBlock;
+ memcpy(PageBuffer1, PageBuffer0, MS_BYTES_PER_PAGE);
+ if (extdat.status1 & (MS_REG_ST1_DTER | MS_REG_ST1_EXER | MS_REG_ST1_FGER))
+ btBlk1stErred = 1;
+ }
+
+ if (btBlk1st == MS_LB_NOT_USED) {
+ result = MS_STATUS_ERROR;
+ goto exit;
+ }
+
+ /* write protect */
+ if ((extdat.status0 & MS_REG_ST0_WP) == MS_REG_ST0_WP_ON)
+ ms_lib_ctrl_set(info, MS_LIB_CTRL_WRPROTECT);
+
+ result = MS_STATUS_ERROR;
+ /* 1st Boot Block */
+ if (btBlk1stErred == 0)
+ result = ms_lib_process_bootblock(us, btBlk1st, PageBuffer1);
+ /* 1st */
+ /* 2nd Boot Block */
+ if (result && (btBlk2nd != MS_LB_NOT_USED))
+ result = ms_lib_process_bootblock(us, btBlk2nd, PageBuffer0);
+
+ if (result) {
+ result = MS_STATUS_ERROR;
+ goto exit;
+ }
+
+ for (TmpBlock = 0; TmpBlock < btBlk1st; TmpBlock++)
+ info->MS_Lib.Phy2LogMap[TmpBlock] = MS_LB_INITIAL_ERROR;
+
+ info->MS_Lib.Phy2LogMap[btBlk1st] = MS_LB_BOOT_BLOCK;
+
+ if (btBlk2nd != MS_LB_NOT_USED) {
+ for (TmpBlock = btBlk1st + 1; TmpBlock < btBlk2nd; TmpBlock++)
+ info->MS_Lib.Phy2LogMap[TmpBlock] = MS_LB_INITIAL_ERROR;
+
+ info->MS_Lib.Phy2LogMap[btBlk2nd] = MS_LB_BOOT_BLOCK;
+ }
+
+ result = ms_lib_scan_logicalblocknumber(us, btBlk1st);
+ if (result)
+ goto exit;
+
+ for (TmpBlock = MS_PHYSICAL_BLOCKS_PER_SEGMENT;
+ TmpBlock < info->MS_Lib.NumberOfPhyBlock;
+ TmpBlock += MS_PHYSICAL_BLOCKS_PER_SEGMENT) {
+ if (ms_count_freeblock(us, TmpBlock) == 0) {
+ ms_lib_ctrl_set(info, MS_LIB_CTRL_WRPROTECT);
+ break;
+ }
+ }
+
+ /* write */
+ if (ms_lib_alloc_writebuf(us)) {
+ result = MS_NO_MEMORY_ERROR;
+ goto exit;
+ }
+
+ result = MS_STATUS_SUCCESS;
+
+exit:
+ kfree(PageBuffer1);
+ kfree(PageBuffer0);
+
+ printk(KERN_INFO "MS_CardInit end\n");
+ return result;
+}
+
+static int ene_ms_init(struct us_data *us)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ int result;
+ u8 buf[0x200];
+ u16 MSP_BlockSize, MSP_UserAreaBlocks;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ printk(KERN_INFO "transport --- ENE_MSInit\n");
+
+ /* the same part to test ENE */
+
+ result = ene_load_bincode(us, MS_INIT_PATTERN);
+ if (result != USB_STOR_XFER_GOOD) {
+ printk(KERN_ERR "Load MS Init Code Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x200;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF1;
+ bcb->CDB[1] = 0x01;
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+ if (result != USB_STOR_XFER_GOOD) {
+ printk(KERN_ERR "Execution MS Init Code Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+ /* the same part to test ENE */
+ info->MS_Status = *(struct MS_STATUS *)&buf[0];
+
+ if (info->MS_Status.Insert && info->MS_Status.Ready) {
+ printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert);
+ printk(KERN_INFO "Ready = %x\n", info->MS_Status.Ready);
+ printk(KERN_INFO "IsMSPro = %x\n", info->MS_Status.IsMSPro);
+ printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG);
+ printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
+ if (info->MS_Status.IsMSPro) {
+ MSP_BlockSize = (buf[6] << 8) | buf[7];
+ MSP_UserAreaBlocks = (buf[10] << 8) | buf[11];
+ info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
+ } else {
+ ms_card_init(us); /* Card is MS (to ms.c)*/
+ }
+ usb_stor_dbg(us, "MS Init Code OK !!\n");
+ } else {
+ usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int ene_sd_init(struct us_data *us)
+{
+ int result;
+ u8 buf[0x200];
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+
+ usb_stor_dbg(us, "transport --- ENE_SDInit\n");
+ /* SD Init Part-1 */
+ result = ene_load_bincode(us, SD_INIT1_PATTERN);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Load SD Init Code Part-1 Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF2;
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* SD Init Part-2 */
+ result = ene_load_bincode(us, SD_INIT2_PATTERN);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Load SD Init Code Part-2 Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ memset(bcb, 0, sizeof(struct bulk_cb_wrap));
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = 0x200;
+ bcb->Flags = US_BULK_FLAG_IN;
+ bcb->CDB[0] = 0xF1;
+
+ result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ info->SD_Status = *(struct SD_STATUS *)&buf[0];
+ if (info->SD_Status.Insert && info->SD_Status.Ready) {
+ struct SD_STATUS *s = &info->SD_Status;
+
+ ene_get_card_status(us, (unsigned char *)&buf);
+ usb_stor_dbg(us, "Insert = %x\n", s->Insert);
+ usb_stor_dbg(us, "Ready = %x\n", s->Ready);
+ usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC);
+ usb_stor_dbg(us, "HiCapacity = %x\n", s->HiCapacity);
+ usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed);
+ usb_stor_dbg(us, "WtP = %x\n", s->WtP);
+ } else {
+ usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+
+static int ene_init(struct us_data *us)
+{
+ int result;
+ u8 misc_reg03 = 0;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+
+ result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (misc_reg03 & 0x01) {
+ if (!info->SD_Status.Ready) {
+ result = ene_sd_init(us);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+ }
+ if (misc_reg03 & 0x02) {
+ if (!info->MS_Status.Ready) {
+ result = ene_ms_init(us);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+ }
+ return result;
+}
+
+/*----- sd_scsi_irp() ---------*/
+static int sd_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
+{
+ int result;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
+
+ info->SrbStatus = SS_SUCCESS;
+ switch (srb->cmnd[0]) {
+ case TEST_UNIT_READY:
+ result = sd_scsi_test_unit_ready(us, srb);
+ break; /* 0x00 */
+ case INQUIRY:
+ result = sd_scsi_inquiry(us, srb);
+ break; /* 0x12 */
+ case MODE_SENSE:
+ result = sd_scsi_mode_sense(us, srb);
+ break; /* 0x1A */
+ /*
+ case START_STOP:
+ result = SD_SCSI_Start_Stop(us, srb);
+ break; //0x1B
+ */
+ case READ_CAPACITY:
+ result = sd_scsi_read_capacity(us, srb);
+ break; /* 0x25 */
+ case READ_10:
+ result = sd_scsi_read(us, srb);
+ break; /* 0x28 */
+ case WRITE_10:
+ result = sd_scsi_write(us, srb);
+ break; /* 0x2A */
+ default:
+ info->SrbStatus = SS_ILLEGAL_REQUEST;
+ result = USB_STOR_TRANSPORT_FAILED;
+ break;
+ }
+ return result;
+}
+
+/*
+ * ms_scsi_irp()
+ */
+static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
+{
+ int result;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
+ info->SrbStatus = SS_SUCCESS;
+ switch (srb->cmnd[0]) {
+ case TEST_UNIT_READY:
+ result = ms_scsi_test_unit_ready(us, srb);
+ break; /* 0x00 */
+ case INQUIRY:
+ result = ms_scsi_inquiry(us, srb);
+ break; /* 0x12 */
+ case MODE_SENSE:
+ result = ms_scsi_mode_sense(us, srb);
+ break; /* 0x1A */
+ case READ_CAPACITY:
+ result = ms_scsi_read_capacity(us, srb);
+ break; /* 0x25 */
+ case READ_10:
+ result = ms_scsi_read(us, srb);
+ break; /* 0x28 */
+ case WRITE_10:
+ result = ms_scsi_write(us, srb);
+ break; /* 0x2A */
+ default:
+ info->SrbStatus = SS_ILLEGAL_REQUEST;
+ result = USB_STOR_TRANSPORT_FAILED;
+ break;
+ }
+ return result;
+}
+
+static int ene_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int result = 0;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+
+ /*US_DEBUG(usb_stor_show_command(us, srb)); */
+ scsi_set_resid(srb, 0);
+ if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) {
+ result = ene_init(us);
+ } else {
+ if (info->SD_Status.Ready)
+ result = sd_scsi_irp(us, srb);
+
+ if (info->MS_Status.Ready)
+ result = ms_scsi_irp(us, srb);
+ }
+ return 0;
+}
+
+
+static int ene_ub6250_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int result;
+ u8 misc_reg03 = 0;
+ struct us_data *us;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list);
+ if (result)
+ return result;
+
+ /* FIXME: where should the code alloc extra buf ? */
+ if (!us->extra) {
+ us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
+ if (!us->extra)
+ return -ENOMEM;
+ us->extra_destructor = ene_ub6250_info_destructor;
+ }
+
+ us->transport_name = "ene_ub6250";
+ us->transport = ene_transport;
+ us->max_lun = 0;
+
+ result = usb_stor_probe2(us);
+ if (result)
+ return result;
+
+ /* probe card type */
+ result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_disconnect(intf);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (!(misc_reg03 & 0x01)) {
+ pr_info("ums_eneub6250: This driver only supports SD/MS cards. "
+ "It does not support SM cards.\n");
+ }
+
+ return result;
+}
+
+
+#ifdef CONFIG_PM
+
+static int ene_ub6250_resume(struct usb_interface *iface)
+{
+ u8 tmp = 0;
+ struct us_data *us = usb_get_intfdata(iface);
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+
+ mutex_lock(&us->dev_mutex);
+
+ if (us->suspend_resume_hook)
+ (us->suspend_resume_hook)(us, US_RESUME);
+
+ mutex_unlock(&us->dev_mutex);
+
+ info->Power_IsResum = true;
+ /*info->SD_Status.Ready = 0; */
+ info->SD_Status = *(struct SD_STATUS *)&tmp;
+ info->MS_Status = *(struct MS_STATUS *)&tmp;
+ info->SM_Status = *(struct SM_STATUS *)&tmp;
+
+ return 0;
+}
+
+static int ene_ub6250_reset_resume(struct usb_interface *iface)
+{
+ u8 tmp = 0;
+ struct us_data *us = usb_get_intfdata(iface);
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+
+ /* Report the reset to the SCSI core */
+ usb_stor_reset_resume(iface);
+
+ /* FIXME: Notify the subdrivers that they need to reinitialize
+ * the device */
+ info->Power_IsResum = true;
+ /*info->SD_Status.Ready = 0; */
+ info->SD_Status = *(struct SD_STATUS *)&tmp;
+ info->MS_Status = *(struct MS_STATUS *)&tmp;
+ info->SM_Status = *(struct SM_STATUS *)&tmp;
+
+ return 0;
+}
+
+#else
+
+#define ene_ub6250_resume NULL
+#define ene_ub6250_reset_resume NULL
+
+#endif
+
+static struct usb_driver ene_ub6250_driver = {
+ .name = "ums_eneub6250",
+ .probe = ene_ub6250_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = ene_ub6250_resume,
+ .reset_resume = ene_ub6250_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = ene_ub6250_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(ene_ub6250_driver);
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
new file mode 100644
index 000000000..ef16068b7
--- /dev/null
+++ b/drivers/usb/storage/freecom.c
@@ -0,0 +1,560 @@
+/* Driver for Freecom USB/IDE adaptor
+ *
+ * Freecom v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ * (C) 2000 David Brown <usb-storage@davidb.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * This driver was developed with information provided in FREECOM's USB
+ * Programmers Reference Guide. For further information contact Freecom
+ * (http://www.freecom.de/)
+ */
+
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
+MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+static void pdump(struct us_data *us, void *ibuffer, int length);
+#endif
+
+/* Bits of HD_STATUS */
+#define ERR_STAT 0x01
+#define DRQ_STAT 0x08
+
+/* All of the outgoing packets are 64 bytes long. */
+struct freecom_cb_wrap {
+ u8 Type; /* Command type. */
+ u8 Timeout; /* Timeout in seconds. */
+ u8 Atapi[12]; /* An ATAPI packet. */
+ u8 Filler[50]; /* Padding Data. */
+};
+
+struct freecom_xfer_wrap {
+ u8 Type; /* Command type. */
+ u8 Timeout; /* Timeout in seconds. */
+ __le32 Count; /* Number of bytes to transfer. */
+ u8 Pad[58];
+} __attribute__ ((packed));
+
+struct freecom_ide_out {
+ u8 Type; /* Type + IDE register. */
+ u8 Pad;
+ __le16 Value; /* Value to write. */
+ u8 Pad2[60];
+};
+
+struct freecom_ide_in {
+ u8 Type; /* Type | IDE register. */
+ u8 Pad[63];
+};
+
+struct freecom_status {
+ u8 Status;
+ u8 Reason;
+ __le16 Count;
+ u8 Pad[60];
+};
+
+/* Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
+ * register. */
+#define FCM_INT_STATUS 0x02 /* INDEX_STAT */
+#define FCM_STATUS_BUSY 0x80
+
+/* These are the packet types. The low bit indicates that this command
+ * should wait for an interrupt. */
+#define FCM_PACKET_ATAPI 0x21
+#define FCM_PACKET_STATUS 0x20
+
+/* Receive data from the IDE interface. The ATAPI packet has already
+ * waited, so the data should be immediately available. */
+#define FCM_PACKET_INPUT 0x81
+
+/* Send data to the IDE interface. */
+#define FCM_PACKET_OUTPUT 0x01
+
+/* Write a value to an ide register. Or the ide register to write after
+ * munging the address a bit. */
+#define FCM_PACKET_IDE_WRITE 0x40
+#define FCM_PACKET_IDE_READ 0xC0
+
+/* All packets (except for status) are 64 bytes long. */
+#define FCM_PACKET_LENGTH 64
+#define FCM_STATUS_PACKET_LENGTH 4
+
+static int init_freecom(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id freecom_usb_ids[] = {
+# include "unusual_freecom.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev freecom_unusual_dev_list[] = {
+# include "unusual_freecom.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+static int
+freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
+ unsigned int ipipe, unsigned int opipe, int count)
+{
+ struct freecom_xfer_wrap *fxfr =
+ (struct freecom_xfer_wrap *) us->iobuf;
+ int result;
+
+ fxfr->Type = FCM_PACKET_INPUT | 0x00;
+ fxfr->Timeout = 0; /* Short timeout for debugging. */
+ fxfr->Count = cpu_to_le32 (count);
+ memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
+
+ usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count);
+
+ /* Issue the transfer command. */
+ result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
+ FCM_PACKET_LENGTH, NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Freecom readdata transport error\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Now transfer all of our blocks. */
+ usb_stor_dbg(us, "Start of read\n");
+ result = usb_stor_bulk_srb(us, ipipe, srb);
+ usb_stor_dbg(us, "freecom_readdata done!\n");
+
+ if (result > USB_STOR_XFER_SHORT)
+ return USB_STOR_TRANSPORT_ERROR;
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int
+freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
+ int unsigned ipipe, unsigned int opipe, int count)
+{
+ struct freecom_xfer_wrap *fxfr =
+ (struct freecom_xfer_wrap *) us->iobuf;
+ int result;
+
+ fxfr->Type = FCM_PACKET_OUTPUT | 0x00;
+ fxfr->Timeout = 0; /* Short timeout for debugging. */
+ fxfr->Count = cpu_to_le32 (count);
+ memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
+
+ usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count);
+
+ /* Issue the transfer command. */
+ result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
+ FCM_PACKET_LENGTH, NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Freecom writedata transport error\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Now transfer all of our blocks. */
+ usb_stor_dbg(us, "Start of write\n");
+ result = usb_stor_bulk_srb(us, opipe, srb);
+
+ usb_stor_dbg(us, "freecom_writedata done!\n");
+ if (result > USB_STOR_XFER_SHORT)
+ return USB_STOR_TRANSPORT_ERROR;
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Transport for the Freecom USB/IDE adaptor.
+ *
+ */
+static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ struct freecom_cb_wrap *fcb;
+ struct freecom_status *fst;
+ unsigned int ipipe, opipe; /* We need both pipes. */
+ int result;
+ unsigned int partial;
+ int length;
+
+ fcb = (struct freecom_cb_wrap *) us->iobuf;
+ fst = (struct freecom_status *) us->iobuf;
+
+ usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n");
+
+ /* Get handles for both transports. */
+ opipe = us->send_bulk_pipe;
+ ipipe = us->recv_bulk_pipe;
+
+ /* The ATAPI Command always goes out first. */
+ fcb->Type = FCM_PACKET_ATAPI | 0x00;
+ fcb->Timeout = 0;
+ memcpy (fcb->Atapi, srb->cmnd, 12);
+ memset (fcb->Filler, 0, sizeof (fcb->Filler));
+
+ US_DEBUG(pdump(us, srb->cmnd, 12));
+
+ /* Send it out. */
+ result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
+ FCM_PACKET_LENGTH, NULL);
+
+ /* The Freecom device will only fail if there is something wrong in
+ * USB land. It returns the status in its own registers, which
+ * come back in the bulk pipe. */
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "freecom transport error\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* There are times we can optimize out this status read, but it
+ * doesn't hurt us to always do it now. */
+ result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+ FCM_STATUS_PACKET_LENGTH, &partial);
+ usb_stor_dbg(us, "foo Status result %d %u\n", result, partial);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ US_DEBUG(pdump(us, (void *)fst, partial));
+
+ /* The firmware will time-out commands after 20 seconds. Some commands
+ * can legitimately take longer than this, so we use a different
+ * command that only waits for the interrupt and then sends status,
+ * without having to send a new ATAPI command to the device.
+ *
+ * NOTE: There is some indication that a data transfer after a timeout
+ * may not work, but that is a condition that should never happen.
+ */
+ while (fst->Status & FCM_STATUS_BUSY) {
+ usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n");
+ usb_stor_dbg(us, "fst->Status is %x\n", fst->Status);
+
+ /* Get the status again */
+ fcb->Type = FCM_PACKET_STATUS;
+ fcb->Timeout = 0;
+ memset (fcb->Atapi, 0, sizeof(fcb->Atapi));
+ memset (fcb->Filler, 0, sizeof (fcb->Filler));
+
+ /* Send it out. */
+ result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
+ FCM_PACKET_LENGTH, NULL);
+
+ /* The Freecom device will only fail if there is something
+ * wrong in USB land. It returns the status in its own
+ * registers, which come back in the bulk pipe.
+ */
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "freecom transport error\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* get the data */
+ result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+ FCM_STATUS_PACKET_LENGTH, &partial);
+
+ usb_stor_dbg(us, "bar Status result %d %u\n", result, partial);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ US_DEBUG(pdump(us, (void *)fst, partial));
+ }
+
+ if (partial != 4)
+ return USB_STOR_TRANSPORT_ERROR;
+ if ((fst->Status & 1) != 0) {
+ usb_stor_dbg(us, "operation failed\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ /* The device might not have as much data available as we
+ * requested. If you ask for more than the device has, this reads
+ * and such will hang. */
+ usb_stor_dbg(us, "Device indicates that it has %d bytes available\n",
+ le16_to_cpu(fst->Count));
+ usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb));
+
+ /* Find the length we desire to read. */
+ switch (srb->cmnd[0]) {
+ case INQUIRY:
+ case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ length = le16_to_cpu(fst->Count);
+ break;
+ default:
+ length = scsi_bufflen(srb);
+ }
+
+ /* verify that this amount is legal */
+ if (length > scsi_bufflen(srb)) {
+ length = scsi_bufflen(srb);
+ usb_stor_dbg(us, "Truncating request to match buffer length: %d\n",
+ length);
+ }
+
+ /* What we do now depends on what direction the data is supposed to
+ * move in. */
+
+ switch (us->srb->sc_data_direction) {
+ case DMA_FROM_DEVICE:
+ /* catch bogus "read 0 length" case */
+ if (!length)
+ break;
+ /* Make sure that the status indicates that the device
+ * wants data as well. */
+ if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
+ usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ result = freecom_readdata (srb, us, ipipe, opipe, length);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ usb_stor_dbg(us, "Waiting for status\n");
+ result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+ FCM_PACKET_LENGTH, &partial);
+ US_DEBUG(pdump(us, (void *)fst, partial));
+
+ if (partial != 4 || result > USB_STOR_XFER_SHORT)
+ return USB_STOR_TRANSPORT_ERROR;
+ if ((fst->Status & ERR_STAT) != 0) {
+ usb_stor_dbg(us, "operation failed\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ if ((fst->Reason & 3) != 3) {
+ usb_stor_dbg(us, "Drive seems still hungry\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ usb_stor_dbg(us, "Transfer happy\n");
+ break;
+
+ case DMA_TO_DEVICE:
+ /* catch bogus "write 0 length" case */
+ if (!length)
+ break;
+ /* Make sure the status indicates that the device wants to
+ * send us data. */
+ /* !!IMPLEMENT!! */
+ result = freecom_writedata (srb, us, ipipe, opipe, length);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ usb_stor_dbg(us, "Waiting for status\n");
+ result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+ FCM_PACKET_LENGTH, &partial);
+
+ if (partial != 4 || result > USB_STOR_XFER_SHORT)
+ return USB_STOR_TRANSPORT_ERROR;
+ if ((fst->Status & ERR_STAT) != 0) {
+ usb_stor_dbg(us, "operation failed\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ if ((fst->Reason & 3) != 3) {
+ usb_stor_dbg(us, "Drive seems still hungry\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ usb_stor_dbg(us, "Transfer happy\n");
+ break;
+
+
+ case DMA_NONE:
+ /* Easy, do nothing. */
+ break;
+
+ default:
+ /* should never hit here -- filtered in usb.c */
+ usb_stor_dbg(us, "freecom unimplemented direction: %d\n",
+ us->srb->sc_data_direction);
+ /* Return fail, SCSI seems to handle this better. */
+ return USB_STOR_TRANSPORT_FAILED;
+ break;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int init_freecom(struct us_data *us)
+{
+ int result;
+ char *buffer = us->iobuf;
+
+ /* The DMA-mapped I/O buffer is 64 bytes long, just right for
+ * all our packets. No need to allocate any extra buffer space.
+ */
+
+ result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
+ 0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ);
+ buffer[32] = '\0';
+ usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer);
+
+ /* Special thanks to the people at Freecom for providing me with
+ * this "magic sequence", which they use in their Windows and MacOS
+ * drivers to make sure that all the attached perhiperals are
+ * properly reset.
+ */
+
+ /* send reset */
+ result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+ 0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ);
+ usb_stor_dbg(us, "result from activate reset is %d\n", result);
+
+ /* wait 250ms */
+ mdelay(250);
+
+ /* clear reset */
+ result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+ 0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ);
+ usb_stor_dbg(us, "result from clear reset is %d\n", result);
+
+ /* wait 3 seconds */
+ mdelay(3 * 1000);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int usb_stor_freecom_reset(struct us_data *us)
+{
+ printk (KERN_CRIT "freecom reset called\n");
+
+ /* We don't really have this feature. */
+ return FAILED;
+}
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+static void pdump(struct us_data *us, void *ibuffer, int length)
+{
+ static char line[80];
+ int offset = 0;
+ unsigned char *buffer = (unsigned char *) ibuffer;
+ int i, j;
+ int from, base;
+
+ offset = 0;
+ for (i = 0; i < length; i++) {
+ if ((i & 15) == 0) {
+ if (i > 0) {
+ offset += sprintf (line+offset, " - ");
+ for (j = i - 16; j < i; j++) {
+ if (buffer[j] >= 32 && buffer[j] <= 126)
+ line[offset++] = buffer[j];
+ else
+ line[offset++] = '.';
+ }
+ line[offset] = 0;
+ usb_stor_dbg(us, "%s\n", line);
+ offset = 0;
+ }
+ offset += sprintf (line+offset, "%08x:", i);
+ } else if ((i & 7) == 0) {
+ offset += sprintf (line+offset, " -");
+ }
+ offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
+ }
+
+ /* Add the last "chunk" of data. */
+ from = (length - 1) % 16;
+ base = ((length - 1) / 16) * 16;
+
+ for (i = from + 1; i < 16; i++)
+ offset += sprintf (line+offset, " ");
+ if (from < 8)
+ offset += sprintf (line+offset, " ");
+ offset += sprintf (line+offset, " - ");
+
+ for (i = 0; i <= from; i++) {
+ if (buffer[base+i] >= 32 && buffer[base+i] <= 126)
+ line[offset++] = buffer[base+i];
+ else
+ line[offset++] = '.';
+ }
+ line[offset] = 0;
+ usb_stor_dbg(us, "%s\n", line);
+ offset = 0;
+}
+#endif
+
+static int freecom_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - freecom_usb_ids) + freecom_unusual_dev_list);
+ if (result)
+ return result;
+
+ us->transport_name = "Freecom";
+ us->transport = freecom_transport;
+ us->transport_reset = usb_stor_freecom_reset;
+ us->max_lun = 0;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver freecom_driver = {
+ .name = "ums-freecom",
+ .probe = freecom_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = freecom_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(freecom_driver);
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
new file mode 100644
index 000000000..31fa2e920
--- /dev/null
+++ b/drivers/usb/storage/initializers.c
@@ -0,0 +1,105 @@
+/* Special Initializers for certain USB Mass Storage devices
+ *
+ * Current development and maintenance by:
+ * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/errno.h>
+
+#include "usb.h"
+#include "initializers.h"
+#include "debug.h"
+#include "transport.h"
+
+/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
+ * mode */
+int usb_stor_euscsi_init(struct us_data *us)
+{
+ int result;
+
+ usb_stor_dbg(us, "Attempting to init eUSCSI bridge...\n");
+ result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+ 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
+ 0x01, 0x0, NULL, 0x0, 5 * HZ);
+ usb_stor_dbg(us, "-- result is %d\n", result);
+
+ return 0;
+}
+
+/* This function is required to activate all four slots on the UCR-61S2B
+ * flash reader */
+int usb_stor_ucr61s2b_init(struct us_data *us)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf;
+ struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap*) us->iobuf;
+ int res;
+ unsigned int partial;
+ static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS";
+
+ usb_stor_dbg(us, "Sending UCR-61S2B initialization packet...\n");
+
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->Tag = 0;
+ bcb->DataTransferLength = cpu_to_le32(0);
+ bcb->Flags = bcb->Lun = 0;
+ bcb->Length = sizeof(init_string) - 1;
+ memset(bcb->CDB, 0, sizeof(bcb->CDB));
+ memcpy(bcb->CDB, init_string, sizeof(init_string) - 1);
+
+ res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
+ US_BULK_CB_WRAP_LEN, &partial);
+ if (res)
+ return -EIO;
+
+ usb_stor_dbg(us, "Getting status packet...\n");
+ res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
+ US_BULK_CS_WRAP_LEN, &partial);
+ if (res)
+ return -EIO;
+
+ return 0;
+}
+
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
+{
+ int result;
+
+ result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+ USB_REQ_SET_FEATURE,
+ USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ 0x01, 0x0, NULL, 0x0, 1 * HZ);
+ usb_stor_dbg(us, "Huawei mode set result is %d\n", result);
+ return 0;
+}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
new file mode 100644
index 000000000..529327fbb
--- /dev/null
+++ b/drivers/usb/storage/initializers.h
@@ -0,0 +1,50 @@
+/* Header file for Special Initializers for certain USB Mass Storage devices
+ *
+ * Current development and maintenance by:
+ * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "usb.h"
+#include "transport.h"
+
+/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
+ * mode */
+int usb_stor_euscsi_init(struct us_data *us);
+
+/* This function is required to activate all four slots on the UCR-61S2B
+ * flash reader */
+int usb_stor_ucr61s2b_init(struct us_data *us);
+
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
new file mode 100644
index 000000000..076178645
--- /dev/null
+++ b/drivers/usb/storage/isd200.c
@@ -0,0 +1,1572 @@
+/* Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
+ *
+ * Current development and maintenance:
+ * (C) 2001-2002 Björn Stenberg (bjorn@haxx.se)
+ *
+ * Developed with the assistance of:
+ * (C) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Initial work:
+ * (C) 2000 In-System Design, Inc. (support@in-system.com)
+ *
+ * The ISD200 ASIC does not natively support ATA devices. The chip
+ * does implement an interface, the ATA Command Block (ATACB) which provides
+ * a means of passing ATA commands and ATA register accesses to a device.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * History:
+ *
+ * 2002-10-19: Removed the specialized transfer routines.
+ * (Alan Stern <stern@rowland.harvard.edu>)
+ * 2001-02-24: Removed lots of duplicate code and simplified the structure.
+ * (bjorn@haxx.se)
+ * 2002-01-16: Fixed endianness bug so it works on the ppc arch.
+ * (Luc Saillard <luc@saillard.org>)
+ * 2002-01-17: All bitfields removed.
+ * (bjorn@haxx.se)
+ */
+
+
+/* Include files */
+
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ata.h>
+#include <linux/hdreg.h>
+#include <linux/scatterlist.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC");
+MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>");
+MODULE_LICENSE("GPL");
+
+static int isd200_Initialization(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id isd200_usb_ids[] = {
+# include "unusual_isd200.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, isd200_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev isd200_unusual_dev_list[] = {
+# include "unusual_isd200.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+/* Timeout defines (in Seconds) */
+
+#define ISD200_ENUM_BSY_TIMEOUT 35
+#define ISD200_ENUM_DETECT_TIMEOUT 30
+#define ISD200_DEFAULT_TIMEOUT 30
+
+/* device flags */
+#define DF_ATA_DEVICE 0x0001
+#define DF_MEDIA_STATUS_ENABLED 0x0002
+#define DF_REMOVABLE_MEDIA 0x0004
+
+/* capability bit definitions */
+#define CAPABILITY_DMA 0x01
+#define CAPABILITY_LBA 0x02
+
+/* command_setX bit definitions */
+#define COMMANDSET_REMOVABLE 0x02
+#define COMMANDSET_MEDIA_STATUS 0x10
+
+/* ATA Vendor Specific defines */
+#define ATA_ADDRESS_DEVHEAD_STD 0xa0
+#define ATA_ADDRESS_DEVHEAD_LBA_MODE 0x40
+#define ATA_ADDRESS_DEVHEAD_SLAVE 0x10
+
+/* Action Select bits */
+#define ACTION_SELECT_0 0x01
+#define ACTION_SELECT_1 0x02
+#define ACTION_SELECT_2 0x04
+#define ACTION_SELECT_3 0x08
+#define ACTION_SELECT_4 0x10
+#define ACTION_SELECT_5 0x20
+#define ACTION_SELECT_6 0x40
+#define ACTION_SELECT_7 0x80
+
+/* Register Select bits */
+#define REG_ALTERNATE_STATUS 0x01
+#define REG_DEVICE_CONTROL 0x01
+#define REG_ERROR 0x02
+#define REG_FEATURES 0x02
+#define REG_SECTOR_COUNT 0x04
+#define REG_SECTOR_NUMBER 0x08
+#define REG_CYLINDER_LOW 0x10
+#define REG_CYLINDER_HIGH 0x20
+#define REG_DEVICE_HEAD 0x40
+#define REG_STATUS 0x80
+#define REG_COMMAND 0x80
+
+/* ATA registers offset definitions */
+#define ATA_REG_ERROR_OFFSET 1
+#define ATA_REG_LCYL_OFFSET 4
+#define ATA_REG_HCYL_OFFSET 5
+#define ATA_REG_STATUS_OFFSET 7
+
+/* ATA error definitions not in <linux/hdreg.h> */
+#define ATA_ERROR_MEDIA_CHANGE 0x20
+
+/* ATA command definitions not in <linux/hdreg.h> */
+#define ATA_COMMAND_GET_MEDIA_STATUS 0xDA
+#define ATA_COMMAND_MEDIA_EJECT 0xED
+
+/* ATA drive control definitions */
+#define ATA_DC_DISABLE_INTERRUPTS 0x02
+#define ATA_DC_RESET_CONTROLLER 0x04
+#define ATA_DC_REENABLE_CONTROLLER 0x00
+
+/*
+ * General purpose return codes
+ */
+
+#define ISD200_ERROR -1
+#define ISD200_GOOD 0
+
+/*
+ * Transport return codes
+ */
+
+#define ISD200_TRANSPORT_GOOD 0 /* Transport good, command good */
+#define ISD200_TRANSPORT_FAILED 1 /* Transport good, command failed */
+#define ISD200_TRANSPORT_ERROR 2 /* Transport bad (i.e. device dead) */
+
+/* driver action codes */
+#define ACTION_READ_STATUS 0
+#define ACTION_RESET 1
+#define ACTION_REENABLE 2
+#define ACTION_SOFT_RESET 3
+#define ACTION_ENUM 4
+#define ACTION_IDENTIFY 5
+
+
+/*
+ * ata_cdb struct
+ */
+
+
+union ata_cdb {
+ struct {
+ unsigned char SignatureByte0;
+ unsigned char SignatureByte1;
+ unsigned char ActionSelect;
+ unsigned char RegisterSelect;
+ unsigned char TransferBlockSize;
+ unsigned char WriteData3F6;
+ unsigned char WriteData1F1;
+ unsigned char WriteData1F2;
+ unsigned char WriteData1F3;
+ unsigned char WriteData1F4;
+ unsigned char WriteData1F5;
+ unsigned char WriteData1F6;
+ unsigned char WriteData1F7;
+ unsigned char Reserved[3];
+ } generic;
+
+ struct {
+ unsigned char SignatureByte0;
+ unsigned char SignatureByte1;
+ unsigned char ActionSelect;
+ unsigned char RegisterSelect;
+ unsigned char TransferBlockSize;
+ unsigned char AlternateStatusByte;
+ unsigned char ErrorByte;
+ unsigned char SectorCountByte;
+ unsigned char SectorNumberByte;
+ unsigned char CylinderLowByte;
+ unsigned char CylinderHighByte;
+ unsigned char DeviceHeadByte;
+ unsigned char StatusByte;
+ unsigned char Reserved[3];
+ } read;
+
+ struct {
+ unsigned char SignatureByte0;
+ unsigned char SignatureByte1;
+ unsigned char ActionSelect;
+ unsigned char RegisterSelect;
+ unsigned char TransferBlockSize;
+ unsigned char DeviceControlByte;
+ unsigned char FeaturesByte;
+ unsigned char SectorCountByte;
+ unsigned char SectorNumberByte;
+ unsigned char CylinderLowByte;
+ unsigned char CylinderHighByte;
+ unsigned char DeviceHeadByte;
+ unsigned char CommandByte;
+ unsigned char Reserved[3];
+ } write;
+};
+
+
+/*
+ * Inquiry data structure. This is the data returned from the target
+ * after it receives an inquiry.
+ *
+ * This structure may be extended by the number of bytes specified
+ * in the field AdditionalLength. The defined size constant only
+ * includes fields through ProductRevisionLevel.
+ */
+
+/*
+ * DeviceType field
+ */
+#define DIRECT_ACCESS_DEVICE 0x00 /* disks */
+#define DEVICE_REMOVABLE 0x80
+
+struct inquiry_data {
+ unsigned char DeviceType;
+ unsigned char DeviceTypeModifier;
+ unsigned char Versions;
+ unsigned char Format;
+ unsigned char AdditionalLength;
+ unsigned char Reserved[2];
+ unsigned char Capability;
+ unsigned char VendorId[8];
+ unsigned char ProductId[16];
+ unsigned char ProductRevisionLevel[4];
+ unsigned char VendorSpecific[20];
+ unsigned char Reserved3[40];
+} __attribute__ ((packed));
+
+/*
+ * INQUIRY data buffer size
+ */
+
+#define INQUIRYDATABUFFERSIZE 36
+
+
+/*
+ * ISD200 CONFIG data struct
+ */
+
+#define ATACFG_TIMING 0x0f
+#define ATACFG_ATAPI_RESET 0x10
+#define ATACFG_MASTER 0x20
+#define ATACFG_BLOCKSIZE 0xa0
+
+#define ATACFGE_LAST_LUN 0x07
+#define ATACFGE_DESC_OVERRIDE 0x08
+#define ATACFGE_STATE_SUSPEND 0x10
+#define ATACFGE_SKIP_BOOT 0x20
+#define ATACFGE_CONF_DESC2 0x40
+#define ATACFGE_INIT_STATUS 0x80
+
+#define CFG_CAPABILITY_SRST 0x01
+
+struct isd200_config {
+ unsigned char EventNotification;
+ unsigned char ExternalClock;
+ unsigned char ATAInitTimeout;
+ unsigned char ATAConfig;
+ unsigned char ATAMajorCommand;
+ unsigned char ATAMinorCommand;
+ unsigned char ATAExtraConfig;
+ unsigned char Capability;
+}__attribute__ ((packed));
+
+
+/*
+ * ISD200 driver information struct
+ */
+
+struct isd200_info {
+ struct inquiry_data InquiryData;
+ u16 *id;
+ struct isd200_config ConfigData;
+ unsigned char *RegsBuf;
+ unsigned char ATARegs[8];
+ unsigned char DeviceHead;
+ unsigned char DeviceFlags;
+
+ /* maximum number of LUNs supported */
+ unsigned char MaxLUNs;
+ unsigned char cmnd[BLK_MAX_CDB];
+ struct scsi_cmnd srb;
+ struct scatterlist sg;
+};
+
+
+/*
+ * Read Capacity Data - returned in Big Endian format
+ */
+
+struct read_capacity_data {
+ __be32 LogicalBlockAddress;
+ __be32 BytesPerBlock;
+};
+
+/*
+ * Read Block Limits Data - returned in Big Endian format
+ * This structure returns the maximum and minimum block
+ * size for a TAPE device.
+ */
+
+struct read_block_limits {
+ unsigned char Reserved;
+ unsigned char BlockMaximumSize[3];
+ unsigned char BlockMinimumSize[2];
+};
+
+
+/*
+ * Sense Data Format
+ */
+
+#define SENSE_ERRCODE 0x7f
+#define SENSE_ERRCODE_VALID 0x80
+#define SENSE_FLAG_SENSE_KEY 0x0f
+#define SENSE_FLAG_BAD_LENGTH 0x20
+#define SENSE_FLAG_END_OF_MEDIA 0x40
+#define SENSE_FLAG_FILE_MARK 0x80
+struct sense_data {
+ unsigned char ErrorCode;
+ unsigned char SegmentNumber;
+ unsigned char Flags;
+ unsigned char Information[4];
+ unsigned char AdditionalSenseLength;
+ unsigned char CommandSpecificInformation[4];
+ unsigned char AdditionalSenseCode;
+ unsigned char AdditionalSenseCodeQualifier;
+ unsigned char FieldReplaceableUnitCode;
+ unsigned char SenseKeySpecific[3];
+} __attribute__ ((packed));
+
+/*
+ * Default request sense buffer size
+ */
+
+#define SENSE_BUFFER_SIZE 18
+
+/***********************************************************************
+ * Helper routines
+ ***********************************************************************/
+
+/**************************************************************************
+ * isd200_build_sense
+ *
+ * Builds an artificial sense buffer to report the results of a
+ * failed command.
+ *
+ * RETURNS:
+ * void
+ */
+static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb)
+{
+ struct isd200_info *info = (struct isd200_info *)us->extra;
+ struct sense_data *buf = (struct sense_data *) &srb->sense_buffer[0];
+ unsigned char error = info->ATARegs[ATA_REG_ERROR_OFFSET];
+
+ if(error & ATA_ERROR_MEDIA_CHANGE) {
+ buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
+ buf->AdditionalSenseLength = 0xb;
+ buf->Flags = UNIT_ATTENTION;
+ buf->AdditionalSenseCode = 0;
+ buf->AdditionalSenseCodeQualifier = 0;
+ } else if (error & ATA_MCR) {
+ buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
+ buf->AdditionalSenseLength = 0xb;
+ buf->Flags = UNIT_ATTENTION;
+ buf->AdditionalSenseCode = 0;
+ buf->AdditionalSenseCodeQualifier = 0;
+ } else if (error & ATA_TRK0NF) {
+ buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
+ buf->AdditionalSenseLength = 0xb;
+ buf->Flags = NOT_READY;
+ buf->AdditionalSenseCode = 0;
+ buf->AdditionalSenseCodeQualifier = 0;
+ } else if (error & ATA_UNC) {
+ buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
+ buf->AdditionalSenseLength = 0xb;
+ buf->Flags = DATA_PROTECT;
+ buf->AdditionalSenseCode = 0;
+ buf->AdditionalSenseCodeQualifier = 0;
+ } else {
+ buf->ErrorCode = 0;
+ buf->AdditionalSenseLength = 0;
+ buf->Flags = 0;
+ buf->AdditionalSenseCode = 0;
+ buf->AdditionalSenseCodeQualifier = 0;
+ }
+}
+
+
+/***********************************************************************
+ * Transport routines
+ ***********************************************************************/
+
+/**************************************************************************
+ * isd200_set_srb(), isd200_srb_set_bufflen()
+ *
+ * Two helpers to facilitate in initialization of scsi_cmnd structure
+ * Will need to change when struct scsi_cmnd changes
+ */
+static void isd200_set_srb(struct isd200_info *info,
+ enum dma_data_direction dir, void* buff, unsigned bufflen)
+{
+ struct scsi_cmnd *srb = &info->srb;
+
+ if (buff)
+ sg_init_one(&info->sg, buff, bufflen);
+
+ srb->sc_data_direction = dir;
+ srb->sdb.table.sgl = buff ? &info->sg : NULL;
+ srb->sdb.length = bufflen;
+ srb->sdb.table.nents = buff ? 1 : 0;
+}
+
+static void isd200_srb_set_bufflen(struct scsi_cmnd *srb, unsigned bufflen)
+{
+ srb->sdb.length = bufflen;
+}
+
+
+/**************************************************************************
+ * isd200_action
+ *
+ * Routine for sending commands to the isd200
+ *
+ * RETURNS:
+ * ISD status code
+ */
+static int isd200_action( struct us_data *us, int action,
+ void* pointer, int value )
+{
+ union ata_cdb ata;
+ /* static to prevent this large struct being placed on the valuable stack */
+ static struct scsi_device srb_dev;
+ struct isd200_info *info = (struct isd200_info *)us->extra;
+ struct scsi_cmnd *srb = &info->srb;
+ int status;
+
+ memset(&ata, 0, sizeof(ata));
+ srb->cmnd = info->cmnd;
+ srb->device = &srb_dev;
+
+ ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+ ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+ ata.generic.TransferBlockSize = 1;
+
+ switch ( action ) {
+ case ACTION_READ_STATUS:
+ usb_stor_dbg(us, " isd200_action(READ_STATUS)\n");
+ ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2;
+ ata.generic.RegisterSelect =
+ REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
+ REG_STATUS | REG_ERROR;
+ isd200_set_srb(info, DMA_FROM_DEVICE, pointer, value);
+ break;
+
+ case ACTION_ENUM:
+ usb_stor_dbg(us, " isd200_action(ENUM,0x%02x)\n", value);
+ ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
+ ACTION_SELECT_3|ACTION_SELECT_4|
+ ACTION_SELECT_5;
+ ata.generic.RegisterSelect = REG_DEVICE_HEAD;
+ ata.write.DeviceHeadByte = value;
+ isd200_set_srb(info, DMA_NONE, NULL, 0);
+ break;
+
+ case ACTION_RESET:
+ usb_stor_dbg(us, " isd200_action(RESET)\n");
+ ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
+ ACTION_SELECT_3|ACTION_SELECT_4;
+ ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
+ ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER;
+ isd200_set_srb(info, DMA_NONE, NULL, 0);
+ break;
+
+ case ACTION_REENABLE:
+ usb_stor_dbg(us, " isd200_action(REENABLE)\n");
+ ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
+ ACTION_SELECT_3|ACTION_SELECT_4;
+ ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
+ ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER;
+ isd200_set_srb(info, DMA_NONE, NULL, 0);
+ break;
+
+ case ACTION_SOFT_RESET:
+ usb_stor_dbg(us, " isd200_action(SOFT_RESET)\n");
+ ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5;
+ ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND;
+ ata.write.DeviceHeadByte = info->DeviceHead;
+ ata.write.CommandByte = ATA_CMD_DEV_RESET;
+ isd200_set_srb(info, DMA_NONE, NULL, 0);
+ break;
+
+ case ACTION_IDENTIFY:
+ usb_stor_dbg(us, " isd200_action(IDENTIFY)\n");
+ ata.generic.RegisterSelect = REG_COMMAND;
+ ata.write.CommandByte = ATA_CMD_ID_ATA;
+ isd200_set_srb(info, DMA_FROM_DEVICE, info->id,
+ ATA_ID_WORDS * 2);
+ break;
+
+ default:
+ usb_stor_dbg(us, "Error: Undefined action %d\n", action);
+ return ISD200_ERROR;
+ }
+
+ memcpy(srb->cmnd, &ata, sizeof(ata.generic));
+ srb->cmd_len = sizeof(ata.generic);
+ status = usb_stor_Bulk_transport(srb, us);
+ if (status == USB_STOR_TRANSPORT_GOOD)
+ status = ISD200_GOOD;
+ else {
+ usb_stor_dbg(us, " isd200_action(0x%02x) error: %d\n",
+ action, status);
+ status = ISD200_ERROR;
+ /* need to reset device here */
+ }
+
+ return status;
+}
+
+/**************************************************************************
+ * isd200_read_regs
+ *
+ * Read ATA Registers
+ *
+ * RETURNS:
+ * ISD status code
+ */
+static int isd200_read_regs( struct us_data *us )
+{
+ struct isd200_info *info = (struct isd200_info *)us->extra;
+ int retStatus = ISD200_GOOD;
+ int transferStatus;
+
+ usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n");
+
+ transferStatus = isd200_action( us, ACTION_READ_STATUS,
+ info->RegsBuf, sizeof(info->ATARegs) );
+ if (transferStatus != ISD200_TRANSPORT_GOOD) {
+ usb_stor_dbg(us, " Error reading ATA registers\n");
+ retStatus = ISD200_ERROR;
+ } else {
+ memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs));
+ usb_stor_dbg(us, " Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n",
+ info->ATARegs[ATA_REG_ERROR_OFFSET]);
+ }
+
+ return retStatus;
+}
+
+
+/**************************************************************************
+ * Invoke the transport and basic error-handling/recovery methods
+ *
+ * This is used by the protocol layers to actually send the message to
+ * the device and receive the response.
+ */
+static void isd200_invoke_transport( struct us_data *us,
+ struct scsi_cmnd *srb,
+ union ata_cdb *ataCdb )
+{
+ int need_auto_sense = 0;
+ int transferStatus;
+ int result;
+
+ /* send the command to the transport layer */
+ memcpy(srb->cmnd, ataCdb, sizeof(ataCdb->generic));
+ srb->cmd_len = sizeof(ataCdb->generic);
+ transferStatus = usb_stor_Bulk_transport(srb, us);
+
+ /* if the command gets aborted by the higher layers, we need to
+ * short-circuit all other processing
+ */
+ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+ usb_stor_dbg(us, "-- command was aborted\n");
+ goto Handle_Abort;
+ }
+
+ switch (transferStatus) {
+
+ case USB_STOR_TRANSPORT_GOOD:
+ /* Indicate a good result */
+ srb->result = SAM_STAT_GOOD;
+ break;
+
+ case USB_STOR_TRANSPORT_NO_SENSE:
+ usb_stor_dbg(us, "-- transport indicates protocol failure\n");
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ return;
+
+ case USB_STOR_TRANSPORT_FAILED:
+ usb_stor_dbg(us, "-- transport indicates command failure\n");
+ need_auto_sense = 1;
+ break;
+
+ case USB_STOR_TRANSPORT_ERROR:
+ usb_stor_dbg(us, "-- transport indicates transport error\n");
+ srb->result = DID_ERROR << 16;
+ /* Need reset here */
+ return;
+
+ default:
+ usb_stor_dbg(us, "-- transport indicates unknown error\n");
+ srb->result = DID_ERROR << 16;
+ /* Need reset here */
+ return;
+ }
+
+ if ((scsi_get_resid(srb) > 0) &&
+ !((srb->cmnd[0] == REQUEST_SENSE) ||
+ (srb->cmnd[0] == INQUIRY) ||
+ (srb->cmnd[0] == MODE_SENSE) ||
+ (srb->cmnd[0] == LOG_SENSE) ||
+ (srb->cmnd[0] == MODE_SENSE_10))) {
+ usb_stor_dbg(us, "-- unexpectedly short transfer\n");
+ need_auto_sense = 1;
+ }
+
+ if (need_auto_sense) {
+ result = isd200_read_regs(us);
+ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+ usb_stor_dbg(us, "-- auto-sense aborted\n");
+ goto Handle_Abort;
+ }
+ if (result == ISD200_GOOD) {
+ isd200_build_sense(us, srb);
+ srb->result = SAM_STAT_CHECK_CONDITION;
+
+ /* If things are really okay, then let's show that */
+ if ((srb->sense_buffer[2] & 0xf) == 0x0)
+ srb->result = SAM_STAT_GOOD;
+ } else {
+ srb->result = DID_ERROR << 16;
+ /* Need reset here */
+ }
+ }
+
+ /* Regardless of auto-sense, if we _know_ we have an error
+ * condition, show that in the result code
+ */
+ if (transferStatus == USB_STOR_TRANSPORT_FAILED)
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ return;
+
+ /* abort processing: the bulk-only transport requires a reset
+ * following an abort */
+ Handle_Abort:
+ srb->result = DID_ABORT << 16;
+
+ /* permit the reset transfer to take place */
+ clear_bit(US_FLIDX_ABORTING, &us->dflags);
+ /* Need reset here */
+}
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+static void isd200_log_config(struct us_data *us, struct isd200_info *info)
+{
+ usb_stor_dbg(us, " Event Notification: 0x%x\n",
+ info->ConfigData.EventNotification);
+ usb_stor_dbg(us, " External Clock: 0x%x\n",
+ info->ConfigData.ExternalClock);
+ usb_stor_dbg(us, " ATA Init Timeout: 0x%x\n",
+ info->ConfigData.ATAInitTimeout);
+ usb_stor_dbg(us, " ATAPI Command Block Size: 0x%x\n",
+ (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6);
+ usb_stor_dbg(us, " Master/Slave Selection: 0x%x\n",
+ info->ConfigData.ATAConfig & ATACFG_MASTER);
+ usb_stor_dbg(us, " ATAPI Reset: 0x%x\n",
+ info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET);
+ usb_stor_dbg(us, " ATA Timing: 0x%x\n",
+ info->ConfigData.ATAConfig & ATACFG_TIMING);
+ usb_stor_dbg(us, " ATA Major Command: 0x%x\n",
+ info->ConfigData.ATAMajorCommand);
+ usb_stor_dbg(us, " ATA Minor Command: 0x%x\n",
+ info->ConfigData.ATAMinorCommand);
+ usb_stor_dbg(us, " Init Status: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS);
+ usb_stor_dbg(us, " Config Descriptor 2: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2);
+ usb_stor_dbg(us, " Skip Device Boot: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT);
+ usb_stor_dbg(us, " ATA 3 State Suspend: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND);
+ usb_stor_dbg(us, " Descriptor Override: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE);
+ usb_stor_dbg(us, " Last LUN Identifier: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN);
+ usb_stor_dbg(us, " SRST Enable: 0x%x\n",
+ info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST);
+}
+#endif
+
+/**************************************************************************
+ * isd200_write_config
+ *
+ * Write the ISD200 Configuration data
+ *
+ * RETURNS:
+ * ISD status code
+ */
+static int isd200_write_config( struct us_data *us )
+{
+ struct isd200_info *info = (struct isd200_info *)us->extra;
+ int retStatus = ISD200_GOOD;
+ int result;
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+ usb_stor_dbg(us, "Entering isd200_write_config\n");
+ usb_stor_dbg(us, " Writing the following ISD200 Config Data:\n");
+ isd200_log_config(us, info);
+#endif
+
+ /* let's send the command via the control pipe */
+ result = usb_stor_ctrl_transfer(
+ us,
+ us->send_ctrl_pipe,
+ 0x01,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ 0x0000,
+ 0x0002,
+ (void *) &info->ConfigData,
+ sizeof(info->ConfigData));
+
+ if (result >= 0) {
+ usb_stor_dbg(us, " ISD200 Config Data was written successfully\n");
+ } else {
+ usb_stor_dbg(us, " Request to write ISD200 Config Data failed!\n");
+ retStatus = ISD200_ERROR;
+ }
+
+ usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus);
+ return retStatus;
+}
+
+
+/**************************************************************************
+ * isd200_read_config
+ *
+ * Reads the ISD200 Configuration data
+ *
+ * RETURNS:
+ * ISD status code
+ */
+static int isd200_read_config( struct us_data *us )
+{
+ struct isd200_info *info = (struct isd200_info *)us->extra;
+ int retStatus = ISD200_GOOD;
+ int result;
+
+ usb_stor_dbg(us, "Entering isd200_read_config\n");
+
+ /* read the configuration information from ISD200. Use this to */
+ /* determine what the special ATA CDB bytes are. */
+
+ result = usb_stor_ctrl_transfer(
+ us,
+ us->recv_ctrl_pipe,
+ 0x02,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x0000,
+ 0x0002,
+ (void *) &info->ConfigData,
+ sizeof(info->ConfigData));
+
+
+ if (result >= 0) {
+ usb_stor_dbg(us, " Retrieved the following ISD200 Config Data:\n");
+#ifdef CONFIG_USB_STORAGE_DEBUG
+ isd200_log_config(us, info);
+#endif
+ } else {
+ usb_stor_dbg(us, " Request to get ISD200 Config Data failed!\n");
+ retStatus = ISD200_ERROR;
+ }
+
+ usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus);
+ return retStatus;
+}
+
+
+/**************************************************************************
+ * isd200_atapi_soft_reset
+ *
+ * Perform an Atapi Soft Reset on the device
+ *
+ * RETURNS:
+ * NT status code
+ */
+static int isd200_atapi_soft_reset( struct us_data *us )
+{
+ int retStatus = ISD200_GOOD;
+ int transferStatus;
+
+ usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n");
+
+ transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 );
+ if (transferStatus != ISD200_TRANSPORT_GOOD) {
+ usb_stor_dbg(us, " Error issuing Atapi Soft Reset\n");
+ retStatus = ISD200_ERROR;
+ }
+
+ usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus);
+ return retStatus;
+}
+
+
+/**************************************************************************
+ * isd200_srst
+ *
+ * Perform an SRST on the device
+ *
+ * RETURNS:
+ * ISD status code
+ */
+static int isd200_srst( struct us_data *us )
+{
+ int retStatus = ISD200_GOOD;
+ int transferStatus;
+
+ usb_stor_dbg(us, "Entering isd200_SRST\n");
+
+ transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 );
+
+ /* check to see if this request failed */
+ if (transferStatus != ISD200_TRANSPORT_GOOD) {
+ usb_stor_dbg(us, " Error issuing SRST\n");
+ retStatus = ISD200_ERROR;
+ } else {
+ /* delay 10ms to give the drive a chance to see it */
+ msleep(10);
+
+ transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 );
+ if (transferStatus != ISD200_TRANSPORT_GOOD) {
+ usb_stor_dbg(us, " Error taking drive out of reset\n");
+ retStatus = ISD200_ERROR;
+ } else {
+ /* delay 50ms to give the drive a chance to recover after SRST */
+ msleep(50);
+ }
+ }
+
+ usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus);
+ return retStatus;
+}
+
+
+/**************************************************************************
+ * isd200_try_enum
+ *
+ * Helper function for isd200_manual_enum(). Does ENUM and READ_STATUS
+ * and tries to analyze the status registers
+ *
+ * RETURNS:
+ * ISD status code
+ */
+static int isd200_try_enum(struct us_data *us, unsigned char master_slave,
+ int detect )
+{
+ int status = ISD200_GOOD;
+ unsigned long endTime;
+ struct isd200_info *info = (struct isd200_info *)us->extra;
+ unsigned char *regs = info->RegsBuf;
+ int recheckAsMaster = 0;
+
+ if ( detect )
+ endTime = jiffies + ISD200_ENUM_DETECT_TIMEOUT * HZ;
+ else
+ endTime = jiffies + ISD200_ENUM_BSY_TIMEOUT * HZ;
+
+ /* loop until we detect !BSY or timeout */
+ while(1) {
+
+ status = isd200_action( us, ACTION_ENUM, NULL, master_slave );
+ if ( status != ISD200_GOOD )
+ break;
+
+ status = isd200_action( us, ACTION_READ_STATUS,
+ regs, 8 );
+ if ( status != ISD200_GOOD )
+ break;
+
+ if (!detect) {
+ if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) {
+ usb_stor_dbg(us, " %s status is still BSY, try again...\n",
+ master_slave == ATA_ADDRESS_DEVHEAD_STD ?
+ "Master" : "Slave");
+ } else {
+ usb_stor_dbg(us, " %s status !BSY, continue with next operation\n",
+ master_slave == ATA_ADDRESS_DEVHEAD_STD ?
+ "Master" : "Slave");
+ break;
+ }
+ }
+ /* check for ATA_BUSY and */
+ /* ATA_DF (workaround ATA Zip drive) and */
+ /* ATA_ERR (workaround for Archos CD-ROM) */
+ else if (regs[ATA_REG_STATUS_OFFSET] &
+ (ATA_BUSY | ATA_DF | ATA_ERR)) {
+ usb_stor_dbg(us, " Status indicates it is not ready, try again...\n");
+ }
+ /* check for DRDY, ATA devices set DRDY after SRST */
+ else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) {
+ usb_stor_dbg(us, " Identified ATA device\n");
+ info->DeviceFlags |= DF_ATA_DEVICE;
+ info->DeviceHead = master_slave;
+ break;
+ }
+ /* check Cylinder High/Low to
+ determine if it is an ATAPI device
+ */
+ else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB &&
+ regs[ATA_REG_LCYL_OFFSET] == 0x14) {
+ /* It seems that the RICOH
+ MP6200A CD/RW drive will
+ report itself okay as a
+ slave when it is really a
+ master. So this check again
+ as a master device just to
+ make sure it doesn't report
+ itself okay as a master also
+ */
+ if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) &&
+ !recheckAsMaster) {
+ usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n");
+ recheckAsMaster = 1;
+ master_slave = ATA_ADDRESS_DEVHEAD_STD;
+ } else {
+ usb_stor_dbg(us, " Identified ATAPI device\n");
+ info->DeviceHead = master_slave;
+
+ status = isd200_atapi_soft_reset(us);
+ break;
+ }
+ } else {
+ usb_stor_dbg(us, " Not ATA, not ATAPI - Weird\n");
+ break;
+ }
+
+ /* check for timeout on this request */
+ if (time_after_eq(jiffies, endTime)) {
+ if (!detect)
+ usb_stor_dbg(us, " BSY check timeout, just continue with next operation...\n");
+ else
+ usb_stor_dbg(us, " Device detect timeout!\n");
+ break;
+ }
+ }
+
+ return status;
+}
+
+/**************************************************************************
+ * isd200_manual_enum
+ *
+ * Determines if the drive attached is an ATA or ATAPI and if it is a
+ * master or slave.
+ *
+ * RETURNS:
+ * ISD status code
+ */
+static int isd200_manual_enum(struct us_data *us)
+{
+ struct isd200_info *info = (struct isd200_info *)us->extra;
+ int retStatus = ISD200_GOOD;
+
+ usb_stor_dbg(us, "Entering isd200_manual_enum\n");
+
+ retStatus = isd200_read_config(us);
+ if (retStatus == ISD200_GOOD) {
+ int isslave;
+ /* master or slave? */
+ retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 0);
+ if (retStatus == ISD200_GOOD)
+ retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_SLAVE, 0);
+
+ if (retStatus == ISD200_GOOD) {
+ retStatus = isd200_srst(us);
+ if (retStatus == ISD200_GOOD)
+ /* ata or atapi? */
+ retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 1);
+ }
+
+ isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0;
+ if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) {
+ usb_stor_dbg(us, " Setting Master/Slave selection to %d\n",
+ isslave);
+ info->ConfigData.ATAConfig &= 0x3f;
+ info->ConfigData.ATAConfig |= (isslave<<6);
+ retStatus = isd200_write_config(us);
+ }
+ }
+
+ usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus);
+ return(retStatus);
+}
+
+static void isd200_fix_driveid(u16 *id)
+{
+#ifndef __LITTLE_ENDIAN
+# ifdef __BIG_ENDIAN
+ int i;
+
+ for (i = 0; i < ATA_ID_WORDS; i++)
+ id[i] = __le16_to_cpu(id[i]);
+# else
+# error "Please fix <asm/byteorder.h>"
+# endif
+#endif
+}
+
+static void isd200_dump_driveid(struct us_data *us, u16 *id)
+{
+ usb_stor_dbg(us, " Identify Data Structure:\n");
+ usb_stor_dbg(us, " config = 0x%x\n", id[ATA_ID_CONFIG]);
+ usb_stor_dbg(us, " cyls = 0x%x\n", id[ATA_ID_CYLS]);
+ usb_stor_dbg(us, " heads = 0x%x\n", id[ATA_ID_HEADS]);
+ usb_stor_dbg(us, " track_bytes = 0x%x\n", id[4]);
+ usb_stor_dbg(us, " sector_bytes = 0x%x\n", id[5]);
+ usb_stor_dbg(us, " sectors = 0x%x\n", id[ATA_ID_SECTORS]);
+ usb_stor_dbg(us, " serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]);
+ usb_stor_dbg(us, " buf_type = 0x%x\n", id[20]);
+ usb_stor_dbg(us, " buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]);
+ usb_stor_dbg(us, " ecc_bytes = 0x%x\n", id[22]);
+ usb_stor_dbg(us, " fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]);
+ usb_stor_dbg(us, " model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]);
+ usb_stor_dbg(us, " max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff);
+ usb_stor_dbg(us, " dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]);
+ usb_stor_dbg(us, " capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8);
+ usb_stor_dbg(us, " tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8);
+ usb_stor_dbg(us, " tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8);
+ usb_stor_dbg(us, " field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]);
+ usb_stor_dbg(us, " cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]);
+ usb_stor_dbg(us, " cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]);
+ usb_stor_dbg(us, " cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]);
+ usb_stor_dbg(us, " cur_capacity = 0x%x\n", ata_id_u32(id, 57));
+ usb_stor_dbg(us, " multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff);
+ usb_stor_dbg(us, " lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY));
+ usb_stor_dbg(us, " command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]);
+ usb_stor_dbg(us, " command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]);
+}
+
+/**************************************************************************
+ * isd200_get_inquiry_data
+ *
+ * Get inquiry data
+ *
+ * RETURNS:
+ * ISD status code
+ */
+static int isd200_get_inquiry_data( struct us_data *us )
+{
+ struct isd200_info *info = (struct isd200_info *)us->extra;
+ int retStatus = ISD200_GOOD;
+ u16 *id = info->id;
+
+ usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n");
+
+ /* set default to Master */
+ info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD;
+
+ /* attempt to manually enumerate this device */
+ retStatus = isd200_manual_enum(us);
+ if (retStatus == ISD200_GOOD) {
+ int transferStatus;
+
+ /* check for an ATA device */
+ if (info->DeviceFlags & DF_ATA_DEVICE) {
+ /* this must be an ATA device */
+ /* perform an ATA Command Identify */
+ transferStatus = isd200_action( us, ACTION_IDENTIFY,
+ id, ATA_ID_WORDS * 2);
+ if (transferStatus != ISD200_TRANSPORT_GOOD) {
+ /* Error issuing ATA Command Identify */
+ usb_stor_dbg(us, " Error issuing ATA Command Identify\n");
+ retStatus = ISD200_ERROR;
+ } else {
+ /* ATA Command Identify successful */
+ int i;
+ __be16 *src;
+ __u16 *dest;
+
+ isd200_fix_driveid(id);
+ isd200_dump_driveid(us, id);
+
+ memset(&info->InquiryData, 0, sizeof(info->InquiryData));
+
+ /* Standard IDE interface only supports disks */
+ info->InquiryData.DeviceType = DIRECT_ACCESS_DEVICE;
+
+ /* The length must be at least 36 (5 + 31) */
+ info->InquiryData.AdditionalLength = 0x1F;
+
+ if (id[ATA_ID_COMMAND_SET_1] & COMMANDSET_MEDIA_STATUS) {
+ /* set the removable bit */
+ info->InquiryData.DeviceTypeModifier = DEVICE_REMOVABLE;
+ info->DeviceFlags |= DF_REMOVABLE_MEDIA;
+ }
+
+ /* Fill in vendor identification fields */
+ src = (__be16 *)&id[ATA_ID_PROD];
+ dest = (__u16*)info->InquiryData.VendorId;
+ for (i=0;i<4;i++)
+ dest[i] = be16_to_cpu(src[i]);
+
+ src = (__be16 *)&id[ATA_ID_PROD + 8/2];
+ dest = (__u16*)info->InquiryData.ProductId;
+ for (i=0;i<8;i++)
+ dest[i] = be16_to_cpu(src[i]);
+
+ src = (__be16 *)&id[ATA_ID_FW_REV];
+ dest = (__u16*)info->InquiryData.ProductRevisionLevel;
+ for (i=0;i<2;i++)
+ dest[i] = be16_to_cpu(src[i]);
+
+ /* determine if it supports Media Status Notification */
+ if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) {
+ usb_stor_dbg(us, " Device supports Media Status Notification\n");
+
+ /* Indicate that it is enabled, even though it is not
+ * This allows the lock/unlock of the media to work
+ * correctly.
+ */
+ info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED;
+ }
+ else
+ info->DeviceFlags &= ~DF_MEDIA_STATUS_ENABLED;
+
+ }
+ } else {
+ /*
+ * this must be an ATAPI device
+ * use an ATAPI protocol (Transparent SCSI)
+ */
+ us->protocol_name = "Transparent SCSI";
+ us->proto_handler = usb_stor_transparent_scsi_command;
+
+ usb_stor_dbg(us, "Protocol changed to: %s\n",
+ us->protocol_name);
+
+ /* Free driver structure */
+ us->extra_destructor(info);
+ kfree(info);
+ us->extra = NULL;
+ us->extra_destructor = NULL;
+ }
+ }
+
+ usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus);
+
+ return(retStatus);
+}
+
+/**************************************************************************
+ * isd200_scsi_to_ata
+ *
+ * Translate SCSI commands to ATA commands.
+ *
+ * RETURNS:
+ * 1 if the command needs to be sent to the transport layer
+ * 0 otherwise
+ */
+static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us,
+ union ata_cdb * ataCdb)
+{
+ struct isd200_info *info = (struct isd200_info *)us->extra;
+ u16 *id = info->id;
+ int sendToTransport = 1;
+ unsigned char sectnum, head;
+ unsigned short cylinder;
+ unsigned long lba;
+ unsigned long blockCount;
+ unsigned char senseData[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+
+ memset(ataCdb, 0, sizeof(union ata_cdb));
+
+ /* SCSI Command */
+ switch (srb->cmnd[0]) {
+ case INQUIRY:
+ usb_stor_dbg(us, " ATA OUT - INQUIRY\n");
+
+ /* copy InquiryData */
+ usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData,
+ sizeof(info->InquiryData), srb);
+ srb->result = SAM_STAT_GOOD;
+ sendToTransport = 0;
+ break;
+
+ case MODE_SENSE:
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_MODE_SENSE\n");
+
+ /* Initialize the return buffer */
+ usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb);
+
+ if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED)
+ {
+ ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+ ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+ ataCdb->generic.TransferBlockSize = 1;
+ ataCdb->generic.RegisterSelect = REG_COMMAND;
+ ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
+ isd200_srb_set_bufflen(srb, 0);
+ } else {
+ usb_stor_dbg(us, " Media Status not supported, just report okay\n");
+ srb->result = SAM_STAT_GOOD;
+ sendToTransport = 0;
+ }
+ break;
+
+ case TEST_UNIT_READY:
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_TEST_UNIT_READY\n");
+
+ if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED)
+ {
+ ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+ ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+ ataCdb->generic.TransferBlockSize = 1;
+ ataCdb->generic.RegisterSelect = REG_COMMAND;
+ ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
+ isd200_srb_set_bufflen(srb, 0);
+ } else {
+ usb_stor_dbg(us, " Media Status not supported, just report okay\n");
+ srb->result = SAM_STAT_GOOD;
+ sendToTransport = 0;
+ }
+ break;
+
+ case READ_CAPACITY:
+ {
+ unsigned long capacity;
+ struct read_capacity_data readCapacityData;
+
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_READ_CAPACITY\n");
+
+ if (ata_id_has_lba(id))
+ capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1;
+ else
+ capacity = (id[ATA_ID_HEADS] * id[ATA_ID_CYLS] *
+ id[ATA_ID_SECTORS]) - 1;
+
+ readCapacityData.LogicalBlockAddress = cpu_to_be32(capacity);
+ readCapacityData.BytesPerBlock = cpu_to_be32(0x200);
+
+ usb_stor_set_xfer_buf((unsigned char *) &readCapacityData,
+ sizeof(readCapacityData), srb);
+ srb->result = SAM_STAT_GOOD;
+ sendToTransport = 0;
+ }
+ break;
+
+ case READ_10:
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_READ\n");
+
+ lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
+ blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
+
+ if (ata_id_has_lba(id)) {
+ sectnum = (unsigned char)(lba);
+ cylinder = (unsigned short)(lba>>8);
+ head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F);
+ } else {
+ sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1);
+ cylinder = (u16)(lba / (id[ATA_ID_SECTORS] *
+ id[ATA_ID_HEADS]));
+ head = (u8)((lba / id[ATA_ID_SECTORS]) %
+ id[ATA_ID_HEADS]);
+ }
+ ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+ ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+ ataCdb->generic.TransferBlockSize = 1;
+ ataCdb->generic.RegisterSelect =
+ REG_SECTOR_COUNT | REG_SECTOR_NUMBER |
+ REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
+ REG_DEVICE_HEAD | REG_COMMAND;
+ ataCdb->write.SectorCountByte = (unsigned char)blockCount;
+ ataCdb->write.SectorNumberByte = sectnum;
+ ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8);
+ ataCdb->write.CylinderLowByte = (unsigned char)cylinder;
+ ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD);
+ ataCdb->write.CommandByte = ATA_CMD_PIO_READ;
+ break;
+
+ case WRITE_10:
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_WRITE\n");
+
+ lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
+ blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
+
+ if (ata_id_has_lba(id)) {
+ sectnum = (unsigned char)(lba);
+ cylinder = (unsigned short)(lba>>8);
+ head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F);
+ } else {
+ sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1);
+ cylinder = (u16)(lba / (id[ATA_ID_SECTORS] *
+ id[ATA_ID_HEADS]));
+ head = (u8)((lba / id[ATA_ID_SECTORS]) %
+ id[ATA_ID_HEADS]);
+ }
+ ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+ ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+ ataCdb->generic.TransferBlockSize = 1;
+ ataCdb->generic.RegisterSelect =
+ REG_SECTOR_COUNT | REG_SECTOR_NUMBER |
+ REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
+ REG_DEVICE_HEAD | REG_COMMAND;
+ ataCdb->write.SectorCountByte = (unsigned char)blockCount;
+ ataCdb->write.SectorNumberByte = sectnum;
+ ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8);
+ ataCdb->write.CylinderLowByte = (unsigned char)cylinder;
+ ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD);
+ ataCdb->write.CommandByte = ATA_CMD_PIO_WRITE;
+ break;
+
+ case ALLOW_MEDIUM_REMOVAL:
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_MEDIUM_REMOVAL\n");
+
+ if (info->DeviceFlags & DF_REMOVABLE_MEDIA) {
+ usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n",
+ srb->cmnd[4]);
+
+ ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+ ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+ ataCdb->generic.TransferBlockSize = 1;
+ ataCdb->generic.RegisterSelect = REG_COMMAND;
+ ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ?
+ ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
+ isd200_srb_set_bufflen(srb, 0);
+ } else {
+ usb_stor_dbg(us, " Not removeable media, just report okay\n");
+ srb->result = SAM_STAT_GOOD;
+ sendToTransport = 0;
+ }
+ break;
+
+ case START_STOP:
+ usb_stor_dbg(us, " ATA OUT - SCSIOP_START_STOP_UNIT\n");
+ usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
+
+ if ((srb->cmnd[4] & 0x3) == 0x2) {
+ usb_stor_dbg(us, " Media Eject\n");
+ ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+ ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+ ataCdb->generic.TransferBlockSize = 0;
+ ataCdb->generic.RegisterSelect = REG_COMMAND;
+ ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT;
+ } else if ((srb->cmnd[4] & 0x3) == 0x1) {
+ usb_stor_dbg(us, " Get Media Status\n");
+ ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
+ ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
+ ataCdb->generic.TransferBlockSize = 1;
+ ataCdb->generic.RegisterSelect = REG_COMMAND;
+ ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
+ isd200_srb_set_bufflen(srb, 0);
+ } else {
+ usb_stor_dbg(us, " Nothing to do, just report okay\n");
+ srb->result = SAM_STAT_GOOD;
+ sendToTransport = 0;
+ }
+ break;
+
+ default:
+ usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n",
+ srb->cmnd[0]);
+ srb->result = DID_ERROR << 16;
+ sendToTransport = 0;
+ break;
+ }
+
+ return(sendToTransport);
+}
+
+
+/**************************************************************************
+ * isd200_free_info
+ *
+ * Frees the driver structure.
+ */
+static void isd200_free_info_ptrs(void *info_)
+{
+ struct isd200_info *info = (struct isd200_info *) info_;
+
+ if (info) {
+ kfree(info->id);
+ kfree(info->RegsBuf);
+ kfree(info->srb.sense_buffer);
+ }
+}
+
+/**************************************************************************
+ * isd200_init_info
+ *
+ * Allocates (if necessary) and initializes the driver structure.
+ *
+ * RETURNS:
+ * ISD status code
+ */
+static int isd200_init_info(struct us_data *us)
+{
+ int retStatus = ISD200_GOOD;
+ struct isd200_info *info;
+
+ info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL);
+ if (!info)
+ retStatus = ISD200_ERROR;
+ else {
+ info->id = kzalloc(ATA_ID_WORDS * 2, GFP_KERNEL);
+ info->RegsBuf = kmalloc(sizeof(info->ATARegs), GFP_KERNEL);
+ info->srb.sense_buffer =
+ kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+ if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) {
+ isd200_free_info_ptrs(info);
+ kfree(info);
+ retStatus = ISD200_ERROR;
+ }
+ }
+
+ if (retStatus == ISD200_GOOD) {
+ us->extra = info;
+ us->extra_destructor = isd200_free_info_ptrs;
+ }
+
+ return retStatus;
+}
+
+/**************************************************************************
+ * Initialization for the ISD200
+ */
+
+static int isd200_Initialization(struct us_data *us)
+{
+ usb_stor_dbg(us, "ISD200 Initialization...\n");
+
+ /* Initialize ISD200 info struct */
+
+ if (isd200_init_info(us) == ISD200_ERROR) {
+ usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n");
+ } else {
+ /* Get device specific data */
+
+ if (isd200_get_inquiry_data(us) != ISD200_GOOD)
+ usb_stor_dbg(us, "ISD200 Initialization Failure\n");
+ else
+ usb_stor_dbg(us, "ISD200 Initialization complete\n");
+ }
+
+ return 0;
+}
+
+
+/**************************************************************************
+ * Protocol and Transport for the ISD200 ASIC
+ *
+ * This protocol and transport are for ATA devices connected to an ISD200
+ * ASIC. An ATAPI device that is connected as a slave device will be
+ * detected in the driver initialization function and the protocol will
+ * be changed to an ATAPI protocol (Transparent SCSI).
+ *
+ */
+
+static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int sendToTransport = 1, orig_bufflen;
+ union ata_cdb ataCdb;
+
+ /* Make sure driver was initialized */
+
+ if (us->extra == NULL)
+ usb_stor_dbg(us, "ERROR Driver not initialized\n");
+
+ scsi_set_resid(srb, 0);
+ /* scsi_bufflen might change in protocol translation to ata */
+ orig_bufflen = scsi_bufflen(srb);
+ sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb);
+
+ /* send the command to the transport layer */
+ if (sendToTransport)
+ isd200_invoke_transport(us, srb, &ataCdb);
+
+ isd200_srb_set_bufflen(srb, orig_bufflen);
+}
+
+static int isd200_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - isd200_usb_ids) + isd200_unusual_dev_list);
+ if (result)
+ return result;
+
+ us->protocol_name = "ISD200 ATA/ATAPI";
+ us->proto_handler = isd200_ata_command;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver isd200_driver = {
+ .name = "ums-isd200",
+ .probe = isd200_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = isd200_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(isd200_driver);
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
new file mode 100644
index 000000000..563078be6
--- /dev/null
+++ b/drivers/usb/storage/jumpshot.c
@@ -0,0 +1,684 @@
+/* Driver for Lexar "Jumpshot" Compact Flash reader
+ *
+ * jumpshot driver v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ * (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org)
+ *
+ * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
+ * which I used as a template for this driver.
+ *
+ * Some bugfixes and scatter-gather code by Gregory P. Smith
+ * (greg-usb@electricrain.com)
+ *
+ * Fix for media change by Joerg Schneider (js@joergschneider.com)
+ *
+ * Developed with the assistance of:
+ *
+ * (C) 2002 Alan Stern <stern@rowland.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+ /*
+ * This driver attempts to support the Lexar Jumpshot USB CompactFlash
+ * reader. Like many other USB CompactFlash readers, the Jumpshot contains
+ * a USB-to-ATA chip.
+ *
+ * This driver supports reading and writing. If you're truly paranoid,
+ * however, you can force the driver into a write-protected state by setting
+ * the WP enable bits in jumpshot_handle_mode_sense. See the comments
+ * in that routine.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+
+MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader");
+MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id jumpshot_usb_ids[] = {
+# include "unusual_jumpshot.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev jumpshot_unusual_dev_list[] = {
+# include "unusual_jumpshot.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+struct jumpshot_info {
+ unsigned long sectors; /* total sector count */
+ unsigned long ssize; /* sector size in bytes */
+
+ /* the following aren't used yet */
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
+
+static inline int jumpshot_bulk_read(struct us_data *us,
+ unsigned char *data,
+ unsigned int len)
+{
+ if (len == 0)
+ return USB_STOR_XFER_GOOD;
+
+ usb_stor_dbg(us, "len = %d\n", len);
+ return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, len, NULL);
+}
+
+
+static inline int jumpshot_bulk_write(struct us_data *us,
+ unsigned char *data,
+ unsigned int len)
+{
+ if (len == 0)
+ return USB_STOR_XFER_GOOD;
+
+ usb_stor_dbg(us, "len = %d\n", len);
+ return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ data, len, NULL);
+}
+
+
+static int jumpshot_get_status(struct us_data *us)
+{
+ int rc;
+
+ if (!us)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ // send the setup
+ rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+ 0, 0xA0, 0, 7, us->iobuf, 1);
+
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (us->iobuf[0] != 0x50) {
+ usb_stor_dbg(us, "0x%2x\n", us->iobuf[0]);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int jumpshot_read_data(struct us_data *us,
+ struct jumpshot_info *info,
+ u32 sector,
+ u32 sectors)
+{
+ unsigned char *command = us->iobuf;
+ unsigned char *buffer;
+ unsigned char thistime;
+ unsigned int totallen, alloclen;
+ int len, result;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ // we're working in LBA mode. according to the ATA spec,
+ // we can support up to 28-bit addressing. I don't know if Jumpshot
+ // supports beyond 24-bit addressing. It's kind of hard to test
+ // since it requires > 8GB CF card.
+
+ if (sector > 0x0FFFFFFF)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ totallen = sectors * info->ssize;
+
+ // Since we don't read more than 64 KB at a time, we have to create
+ // a bounce buffer and move the data a piece at a time between the
+ // bounce buffer and the actual transfer buffer.
+
+ alloclen = min(totallen, 65536u);
+ buffer = kmalloc(alloclen, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ do {
+ // loop, never allocate or transfer more than 64k at once
+ // (min(128k, 255*info->ssize) is the real limit)
+ len = min(totallen, alloclen);
+ thistime = (len / info->ssize) & 0xff;
+
+ command[0] = 0;
+ command[1] = thistime;
+ command[2] = sector & 0xFF;
+ command[3] = (sector >> 8) & 0xFF;
+ command[4] = (sector >> 16) & 0xFF;
+
+ command[5] = 0xE0 | ((sector >> 24) & 0x0F);
+ command[6] = 0x20;
+
+ // send the setup + command
+ result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+ 0, 0x20, 0, 1, command, 7);
+ if (result != USB_STOR_XFER_GOOD)
+ goto leave;
+
+ // read the result
+ result = jumpshot_bulk_read(us, buffer, len);
+ if (result != USB_STOR_XFER_GOOD)
+ goto leave;
+
+ usb_stor_dbg(us, "%d bytes\n", len);
+
+ // Store the data in the transfer buffer
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &sg_offset, TO_XFER_BUF);
+
+ sector += thistime;
+ totallen -= len;
+ } while (totallen > 0);
+
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+}
+
+
+static int jumpshot_write_data(struct us_data *us,
+ struct jumpshot_info *info,
+ u32 sector,
+ u32 sectors)
+{
+ unsigned char *command = us->iobuf;
+ unsigned char *buffer;
+ unsigned char thistime;
+ unsigned int totallen, alloclen;
+ int len, result, waitcount;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ // we're working in LBA mode. according to the ATA spec,
+ // we can support up to 28-bit addressing. I don't know if Jumpshot
+ // supports beyond 24-bit addressing. It's kind of hard to test
+ // since it requires > 8GB CF card.
+ //
+ if (sector > 0x0FFFFFFF)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ totallen = sectors * info->ssize;
+
+ // Since we don't write more than 64 KB at a time, we have to create
+ // a bounce buffer and move the data a piece at a time between the
+ // bounce buffer and the actual transfer buffer.
+
+ alloclen = min(totallen, 65536u);
+ buffer = kmalloc(alloclen, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ do {
+ // loop, never allocate or transfer more than 64k at once
+ // (min(128k, 255*info->ssize) is the real limit)
+
+ len = min(totallen, alloclen);
+ thistime = (len / info->ssize) & 0xff;
+
+ // Get the data from the transfer buffer
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &sg_offset, FROM_XFER_BUF);
+
+ command[0] = 0;
+ command[1] = thistime;
+ command[2] = sector & 0xFF;
+ command[3] = (sector >> 8) & 0xFF;
+ command[4] = (sector >> 16) & 0xFF;
+
+ command[5] = 0xE0 | ((sector >> 24) & 0x0F);
+ command[6] = 0x30;
+
+ // send the setup + command
+ result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+ 0, 0x20, 0, 1, command, 7);
+ if (result != USB_STOR_XFER_GOOD)
+ goto leave;
+
+ // send the data
+ result = jumpshot_bulk_write(us, buffer, len);
+ if (result != USB_STOR_XFER_GOOD)
+ goto leave;
+
+ // read the result. apparently the bulk write can complete
+ // before the jumpshot drive is finished writing. so we loop
+ // here until we get a good return code
+ waitcount = 0;
+ do {
+ result = jumpshot_get_status(us);
+ if (result != USB_STOR_TRANSPORT_GOOD) {
+ // I have not experimented to find the smallest value.
+ //
+ msleep(50);
+ }
+ } while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10));
+
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ usb_stor_dbg(us, "Gah! Waitcount = 10. Bad write!?\n");
+
+ sector += thistime;
+ totallen -= len;
+ } while (totallen > 0);
+
+ kfree(buffer);
+ return result;
+
+ leave:
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+}
+
+static int jumpshot_id_device(struct us_data *us,
+ struct jumpshot_info *info)
+{
+ unsigned char *command = us->iobuf;
+ unsigned char *reply;
+ int rc;
+
+ if (!info)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ command[0] = 0xE0;
+ command[1] = 0xEC;
+ reply = kmalloc(512, GFP_NOIO);
+ if (!reply)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ // send the setup
+ rc = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+ 0, 0x20, 0, 6, command, 2);
+
+ if (rc != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Gah! send_control for read_capacity failed\n");
+ rc = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ // read the reply
+ rc = jumpshot_bulk_read(us, reply, 512);
+ if (rc != USB_STOR_XFER_GOOD) {
+ rc = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ info->sectors = ((u32)(reply[117]) << 24) |
+ ((u32)(reply[116]) << 16) |
+ ((u32)(reply[115]) << 8) |
+ ((u32)(reply[114]) );
+
+ rc = USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+ kfree(reply);
+ return rc;
+}
+
+static int jumpshot_handle_mode_sense(struct us_data *us,
+ struct scsi_cmnd * srb,
+ int sense_6)
+{
+ static unsigned char rw_err_page[12] = {
+ 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
+ };
+ static unsigned char cache_page[12] = {
+ 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
+ };
+ static unsigned char rbac_page[12] = {
+ 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
+ };
+ static unsigned char timer_page[8] = {
+ 0x1C, 0x6, 0, 0, 0, 0
+ };
+ unsigned char pc, page_code;
+ unsigned int i = 0;
+ struct jumpshot_info *info = (struct jumpshot_info *) (us->extra);
+ unsigned char *ptr = us->iobuf;
+
+ pc = srb->cmnd[2] >> 6;
+ page_code = srb->cmnd[2] & 0x3F;
+
+ switch (pc) {
+ case 0x0:
+ usb_stor_dbg(us, "Current values\n");
+ break;
+ case 0x1:
+ usb_stor_dbg(us, "Changeable values\n");
+ break;
+ case 0x2:
+ usb_stor_dbg(us, "Default values\n");
+ break;
+ case 0x3:
+ usb_stor_dbg(us, "Saves values\n");
+ break;
+ }
+
+ memset(ptr, 0, 8);
+ if (sense_6) {
+ ptr[2] = 0x00; // WP enable: 0x80
+ i = 4;
+ } else {
+ ptr[3] = 0x00; // WP enable: 0x80
+ i = 8;
+ }
+
+ switch (page_code) {
+ case 0x0:
+ // vendor-specific mode
+ info->sense_key = 0x05;
+ info->sense_asc = 0x24;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+
+ case 0x1:
+ memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+ i += sizeof(rw_err_page);
+ break;
+
+ case 0x8:
+ memcpy(ptr + i, cache_page, sizeof(cache_page));
+ i += sizeof(cache_page);
+ break;
+
+ case 0x1B:
+ memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+ i += sizeof(rbac_page);
+ break;
+
+ case 0x1C:
+ memcpy(ptr + i, timer_page, sizeof(timer_page));
+ i += sizeof(timer_page);
+ break;
+
+ case 0x3F:
+ memcpy(ptr + i, timer_page, sizeof(timer_page));
+ i += sizeof(timer_page);
+ memcpy(ptr + i, rbac_page, sizeof(rbac_page));
+ i += sizeof(rbac_page);
+ memcpy(ptr + i, cache_page, sizeof(cache_page));
+ i += sizeof(cache_page);
+ memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
+ i += sizeof(rw_err_page);
+ break;
+ }
+
+ if (sense_6)
+ ptr[0] = i - 1;
+ else
+ ((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
+ usb_stor_set_xfer_buf(ptr, i, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+
+static void jumpshot_info_destructor(void *extra)
+{
+ // this routine is a placeholder...
+ // currently, we don't allocate any extra blocks so we're okay
+}
+
+
+
+// Transport for the Lexar 'Jumpshot'
+//
+static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ struct jumpshot_info *info;
+ int rc;
+ unsigned long block, blocks;
+ unsigned char *ptr = us->iobuf;
+ static unsigned char inquiry_response[8] = {
+ 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+ };
+
+ if (!us->extra) {
+ us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO);
+ if (!us->extra)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ us->extra_destructor = jumpshot_info_destructor;
+ }
+
+ info = (struct jumpshot_info *) (us->extra);
+
+ if (srb->cmnd[0] == INQUIRY) {
+ usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+ memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+ fill_inquiry_response(us, ptr, 36);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == READ_CAPACITY) {
+ info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec
+
+ rc = jumpshot_get_status(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ rc = jumpshot_id_device(us, info);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
+ info->sectors, info->ssize);
+
+ // build the reply
+ //
+ ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
+ ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
+ usb_stor_set_xfer_buf(ptr, 8, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == MODE_SELECT_10) {
+ usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (srb->cmnd[0] == READ_10) {
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+ usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
+ block, blocks);
+ return jumpshot_read_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == READ_12) {
+ // I don't think we'll ever see a READ_12 but support it anyway...
+ //
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+ ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
+
+ usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
+ block, blocks);
+ return jumpshot_read_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == WRITE_10) {
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+ usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
+ block, blocks);
+ return jumpshot_write_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == WRITE_12) {
+ // I don't think we'll ever see a WRITE_12 but support it anyway...
+ //
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+ ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
+
+ usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
+ block, blocks);
+ return jumpshot_write_data(us, info, block, blocks);
+ }
+
+
+ if (srb->cmnd[0] == TEST_UNIT_READY) {
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
+ return jumpshot_get_status(us);
+ }
+
+ if (srb->cmnd[0] == REQUEST_SENSE) {
+ usb_stor_dbg(us, "REQUEST_SENSE\n");
+
+ memset(ptr, 0, 18);
+ ptr[0] = 0xF0;
+ ptr[2] = info->sense_key;
+ ptr[7] = 11;
+ ptr[12] = info->sense_asc;
+ ptr[13] = info->sense_ascq;
+ usb_stor_set_xfer_buf(ptr, 18, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == MODE_SENSE) {
+ usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
+ return jumpshot_handle_mode_sense(us, srb, 1);
+ }
+
+ if (srb->cmnd[0] == MODE_SENSE_10) {
+ usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
+ return jumpshot_handle_mode_sense(us, srb, 0);
+ }
+
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+ // sure. whatever. not like we can stop the user from popping
+ // the media out of the device (no locking doors, etc)
+ //
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == START_STOP) {
+ /* this is used by sd.c'check_scsidisk_media_change to detect
+ media change */
+ usb_stor_dbg(us, "START_STOP\n");
+ /* the first jumpshot_id_device after a media change returns
+ an error (determined experimentally) */
+ rc = jumpshot_id_device(us, info);
+ if (rc == USB_STOR_TRANSPORT_GOOD) {
+ info->sense_key = NO_SENSE;
+ srb->result = SUCCESS;
+ } else {
+ info->sense_key = UNIT_ATTENTION;
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ }
+ return rc;
+ }
+
+ usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
+ info->sense_key = 0x05;
+ info->sense_asc = 0x20;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+static int jumpshot_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - jumpshot_usb_ids) + jumpshot_unusual_dev_list);
+ if (result)
+ return result;
+
+ us->transport_name = "Lexar Jumpshot Control/Bulk";
+ us->transport = jumpshot_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ us->max_lun = 1;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver jumpshot_driver = {
+ .name = "ums-jumpshot",
+ .probe = jumpshot_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = jumpshot_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(jumpshot_driver);
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
new file mode 100644
index 000000000..94d16ee5e
--- /dev/null
+++ b/drivers/usb/storage/karma.c
@@ -0,0 +1,236 @@
+/* Driver for Rio Karma
+ *
+ * (c) 2006 Bob Copeland <me@bobcopeland.com>
+ * (c) 2006 Keith Bennett <keith@mcs.st-and.ac.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Driver for Rio Karma");
+MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>, Keith Bennett <keith@mcs.st-and.ac.uk>");
+MODULE_LICENSE("GPL");
+
+#define RIO_PREFIX "RIOP\x00"
+#define RIO_PREFIX_LEN 5
+#define RIO_SEND_LEN 40
+#define RIO_RECV_LEN 0x200
+
+#define RIO_ENTER_STORAGE 0x1
+#define RIO_LEAVE_STORAGE 0x2
+#define RIO_RESET 0xC
+
+struct karma_data {
+ int in_storage;
+ char *recv;
+};
+
+static int rio_karma_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id karma_usb_ids[] = {
+# include "unusual_karma.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, karma_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev karma_unusual_dev_list[] = {
+# include "unusual_karma.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/*
+ * Send commands to Rio Karma.
+ *
+ * For each command we send 40 bytes starting 'RIOP\0' followed by
+ * the command number and a sequence number, which the device will ack
+ * with a 512-byte packet with the high four bits set and everything
+ * else null. Then we send 'RIOP\x80' followed by a zero and the
+ * sequence number, until byte 5 in the response repeats the sequence
+ * number.
+ */
+static int rio_karma_send_command(char cmd, struct us_data *us)
+{
+ int result, partial;
+ unsigned long timeout;
+ static unsigned char seq = 1;
+ struct karma_data *data = (struct karma_data *) us->extra;
+
+ usb_stor_dbg(us, "sending command %04x\n", cmd);
+ memset(us->iobuf, 0, RIO_SEND_LEN);
+ memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN);
+ us->iobuf[5] = cmd;
+ us->iobuf[6] = seq;
+
+ timeout = jiffies + msecs_to_jiffies(6000);
+ for (;;) {
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ us->iobuf, RIO_SEND_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto err;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data->recv, RIO_RECV_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto err;
+
+ if (data->recv[5] == seq)
+ break;
+
+ if (time_after(jiffies, timeout))
+ goto err;
+
+ us->iobuf[4] = 0x80;
+ us->iobuf[5] = 0;
+ msleep(50);
+ }
+
+ seq++;
+ if (seq == 0)
+ seq = 1;
+
+ usb_stor_dbg(us, "sent command %04x\n", cmd);
+ return 0;
+err:
+ usb_stor_dbg(us, "command %04x failed\n", cmd);
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Trap START_STOP and READ_10 to leave/re-enter storage mode.
+ * Everything else is propagated to the normal bulk layer.
+ */
+static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int ret;
+ struct karma_data *data = (struct karma_data *) us->extra;
+
+ if (srb->cmnd[0] == READ_10 && !data->in_storage) {
+ ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
+ if (ret)
+ return ret;
+
+ data->in_storage = 1;
+ return usb_stor_Bulk_transport(srb, us);
+ } else if (srb->cmnd[0] == START_STOP) {
+ ret = rio_karma_send_command(RIO_LEAVE_STORAGE, us);
+ if (ret)
+ return ret;
+
+ data->in_storage = 0;
+ return rio_karma_send_command(RIO_RESET, us);
+ }
+ return usb_stor_Bulk_transport(srb, us);
+}
+
+static void rio_karma_destructor(void *extra)
+{
+ struct karma_data *data = (struct karma_data *) extra;
+ kfree(data->recv);
+}
+
+static int rio_karma_init(struct us_data *us)
+{
+ int ret = 0;
+ struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
+ if (!data)
+ goto out;
+
+ data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO);
+ if (!data->recv) {
+ kfree(data);
+ goto out;
+ }
+
+ us->extra = data;
+ us->extra_destructor = rio_karma_destructor;
+ ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
+ data->in_storage = (ret == 0);
+out:
+ return ret;
+}
+
+static int karma_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - karma_usb_ids) + karma_unusual_dev_list);
+ if (result)
+ return result;
+
+ us->transport_name = "Rio Karma/Bulk";
+ us->transport = rio_karma_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver karma_driver = {
+ .name = "ums-karma",
+ .probe = karma_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = karma_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(karma_driver);
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
new file mode 100644
index 000000000..74e2aa23b
--- /dev/null
+++ b/drivers/usb/storage/onetouch.c
@@ -0,0 +1,317 @@
+/*
+ * Support for the Maxtor OneTouch USB hard drive's button
+ *
+ * Current development and maintenance by:
+ * Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
+ *
+ * Initial work by:
+ * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
+ *
+ * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include "usb.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver");
+MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>");
+MODULE_LICENSE("GPL");
+
+#define ONETOUCH_PKT_LEN 0x02
+#define ONETOUCH_BUTTON KEY_PROG1
+
+static int onetouch_connect_input(struct us_data *ss);
+static void onetouch_release_input(void *onetouch_);
+
+struct usb_onetouch {
+ char name[128];
+ char phys[64];
+ struct input_dev *dev; /* input device interface */
+ struct usb_device *udev; /* usb device */
+
+ struct urb *irq; /* urb for interrupt in report */
+ unsigned char *data; /* input data */
+ dma_addr_t data_dma;
+ unsigned int is_open:1;
+};
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id onetouch_usb_ids[] = {
+# include "unusual_onetouch.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, onetouch_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev onetouch_unusual_dev_list[] = {
+# include "unusual_onetouch.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+static void usb_onetouch_irq(struct urb *urb)
+{
+ struct usb_onetouch *onetouch = urb->context;
+ signed char *data = onetouch->data;
+ struct input_dev *dev = onetouch->dev;
+ int status = urb->status;
+ int retval;
+
+ switch (status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ /* -EPIPE: should clear the halt */
+ default: /* error */
+ goto resubmit;
+ }
+
+ input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02);
+ input_sync(dev);
+
+resubmit:
+ retval = usb_submit_urb (urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&dev->dev, "can't resubmit intr, %s-%s/input0, "
+ "retval %d\n", onetouch->udev->bus->bus_name,
+ onetouch->udev->devpath, retval);
+}
+
+static int usb_onetouch_open(struct input_dev *dev)
+{
+ struct usb_onetouch *onetouch = input_get_drvdata(dev);
+
+ onetouch->is_open = 1;
+ onetouch->irq->dev = onetouch->udev;
+ if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
+ dev_err(&dev->dev, "usb_submit_urb failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void usb_onetouch_close(struct input_dev *dev)
+{
+ struct usb_onetouch *onetouch = input_get_drvdata(dev);
+
+ usb_kill_urb(onetouch->irq);
+ onetouch->is_open = 0;
+}
+
+#ifdef CONFIG_PM
+static void usb_onetouch_pm_hook(struct us_data *us, int action)
+{
+ struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra;
+
+ if (onetouch->is_open) {
+ switch (action) {
+ case US_SUSPEND:
+ usb_kill_urb(onetouch->irq);
+ break;
+ case US_RESUME:
+ if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0)
+ dev_err(&onetouch->irq->dev->dev,
+ "usb_submit_urb failed\n");
+ break;
+ default:
+ break;
+ }
+ }
+}
+#endif /* CONFIG_PM */
+
+static int onetouch_connect_input(struct us_data *ss)
+{
+ struct usb_device *udev = ss->pusb_dev;
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_onetouch *onetouch;
+ struct input_dev *input_dev;
+ int pipe, maxp;
+ int error = -ENOMEM;
+
+ interface = ss->pusb_intf->cur_altsetting;
+
+ if (interface->desc.bNumEndpoints != 3)
+ return -ENODEV;
+
+ endpoint = &interface->endpoint[2].desc;
+ if (!usb_endpoint_is_int_in(endpoint))
+ return -ENODEV;
+
+ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = min(maxp, ONETOUCH_PKT_LEN);
+
+ onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!onetouch || !input_dev)
+ goto fail1;
+
+ onetouch->data = usb_alloc_coherent(udev, ONETOUCH_PKT_LEN,
+ GFP_KERNEL, &onetouch->data_dma);
+ if (!onetouch->data)
+ goto fail1;
+
+ onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!onetouch->irq)
+ goto fail2;
+
+ onetouch->udev = udev;
+ onetouch->dev = input_dev;
+
+ if (udev->manufacturer)
+ strlcpy(onetouch->name, udev->manufacturer,
+ sizeof(onetouch->name));
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(onetouch->name, " ", sizeof(onetouch->name));
+ strlcat(onetouch->name, udev->product, sizeof(onetouch->name));
+ }
+
+ if (!strlen(onetouch->name))
+ snprintf(onetouch->name, sizeof(onetouch->name),
+ "Maxtor Onetouch %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys));
+ strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys));
+
+ input_dev->name = onetouch->name;
+ input_dev->phys = onetouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->dev.parent = &udev->dev;
+
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(ONETOUCH_BUTTON, input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
+
+ input_set_drvdata(input_dev, onetouch);
+
+ input_dev->open = usb_onetouch_open;
+ input_dev->close = usb_onetouch_close;
+
+ usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, maxp,
+ usb_onetouch_irq, onetouch, endpoint->bInterval);
+ onetouch->irq->transfer_dma = onetouch->data_dma;
+ onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ ss->extra_destructor = onetouch_release_input;
+ ss->extra = onetouch;
+#ifdef CONFIG_PM
+ ss->suspend_resume_hook = usb_onetouch_pm_hook;
+#endif
+
+ error = input_register_device(onetouch->dev);
+ if (error)
+ goto fail3;
+
+ return 0;
+
+ fail3: usb_free_urb(onetouch->irq);
+ fail2: usb_free_coherent(udev, ONETOUCH_PKT_LEN,
+ onetouch->data, onetouch->data_dma);
+ fail1: kfree(onetouch);
+ input_free_device(input_dev);
+ return error;
+}
+
+static void onetouch_release_input(void *onetouch_)
+{
+ struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
+
+ if (onetouch) {
+ usb_kill_urb(onetouch->irq);
+ input_unregister_device(onetouch->dev);
+ usb_free_urb(onetouch->irq);
+ usb_free_coherent(onetouch->udev, ONETOUCH_PKT_LEN,
+ onetouch->data, onetouch->data_dma);
+ }
+}
+
+static int onetouch_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - onetouch_usb_ids) + onetouch_unusual_dev_list);
+ if (result)
+ return result;
+
+ /* Use default transport and protocol */
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver onetouch_driver = {
+ .name = "ums-onetouch",
+ .probe = onetouch_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = onetouch_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(onetouch_driver);
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
new file mode 100644
index 000000000..b2b35b1d7
--- /dev/null
+++ b/drivers/usb/storage/option_ms.c
@@ -0,0 +1,171 @@
+/*
+ * Driver for Option High Speed Mobile Devices.
+ *
+ * (c) 2008 Dan Williams <dcbw@redhat.com>
+ *
+ * Inspiration taken from sierra_ms.c by Kevin Lloyd <klloyd@sierrawireless.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "option_ms.h"
+#include "debug.h"
+
+#define ZCD_FORCE_MODEM 0x01
+#define ZCD_ALLOW_MS 0x02
+
+static unsigned int option_zero_cd = ZCD_FORCE_MODEM;
+module_param(option_zero_cd, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(option_zero_cd, "ZeroCD mode (1=Force Modem (default),"
+ " 2=Allow CD-Rom");
+
+#define RESPONSE_LEN 1024
+
+static int option_rezero(struct us_data *us)
+{
+ const unsigned char rezero_msg[] = {
+ 0x55, 0x53, 0x42, 0x43, 0x78, 0x56, 0x34, 0x12,
+ 0x01, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x01,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+ char *buffer;
+ int result;
+
+ usb_stor_dbg(us, "Option MS: %s\n", "DEVICE MODE SWITCH");
+
+ buffer = kzalloc(RESPONSE_LEN, GFP_KERNEL);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ memcpy(buffer, rezero_msg, sizeof(rezero_msg));
+ result = usb_stor_bulk_transfer_buf(us,
+ us->send_bulk_pipe,
+ buffer, sizeof(rezero_msg), NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_XFER_ERROR;
+ goto out;
+ }
+
+ /* Some of the devices need to be asked for a response, but we don't
+ * care what that response is.
+ */
+ usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, RESPONSE_LEN, NULL);
+
+ /* Read the CSW */
+ usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, 13, NULL);
+
+ result = USB_STOR_XFER_GOOD;
+
+out:
+ kfree(buffer);
+ return result;
+}
+
+static int option_inquiry(struct us_data *us)
+{
+ const unsigned char inquiry_msg[] = {
+ 0x55, 0x53, 0x42, 0x43, 0x12, 0x34, 0x56, 0x78,
+ 0x24, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x12,
+ 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+ char *buffer;
+ int result;
+
+ usb_stor_dbg(us, "Option MS: %s\n", "device inquiry for vendor name");
+
+ buffer = kzalloc(0x24, GFP_KERNEL);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ memcpy(buffer, inquiry_msg, sizeof(inquiry_msg));
+ result = usb_stor_bulk_transfer_buf(us,
+ us->send_bulk_pipe,
+ buffer, sizeof(inquiry_msg), NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_XFER_ERROR;
+ goto out;
+ }
+
+ result = usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, 0x24, NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_XFER_ERROR;
+ goto out;
+ }
+
+ result = memcmp(buffer+8, "Option", 6);
+
+ if (result != 0)
+ result = memcmp(buffer+8, "ZCOPTION", 8);
+
+ /* Read the CSW */
+ usb_stor_bulk_transfer_buf(us,
+ us->recv_bulk_pipe,
+ buffer, 13, NULL);
+
+out:
+ kfree(buffer);
+ return result;
+}
+
+
+int option_ms_init(struct us_data *us)
+{
+ int result;
+
+ usb_stor_dbg(us, "Option MS: %s\n", "option_ms_init called");
+
+ /* Additional test for vendor information via INQUIRY,
+ * because some vendor/product IDs are ambiguous
+ */
+ result = option_inquiry(us);
+ if (result != 0) {
+ usb_stor_dbg(us, "Option MS: %s\n",
+ "vendor is not Option or not determinable, no action taken");
+ return 0;
+ } else
+ usb_stor_dbg(us, "Option MS: %s\n",
+ "this is a genuine Option device, proceeding");
+
+ /* Force Modem mode */
+ if (option_zero_cd == ZCD_FORCE_MODEM) {
+ usb_stor_dbg(us, "Option MS: %s\n", "Forcing Modem Mode");
+ result = option_rezero(us);
+ if (result != USB_STOR_XFER_GOOD)
+ usb_stor_dbg(us, "Option MS: %s\n",
+ "Failed to switch to modem mode");
+ return -EIO;
+ } else if (option_zero_cd == ZCD_ALLOW_MS) {
+ /* Allow Mass Storage mode (keep CD-Rom) */
+ usb_stor_dbg(us, "Option MS: %s\n",
+ "Allowing Mass Storage Mode if device requests it");
+ }
+
+ return 0;
+}
+
diff --git a/drivers/usb/storage/option_ms.h b/drivers/usb/storage/option_ms.h
new file mode 100644
index 000000000..b6e448cab
--- /dev/null
+++ b/drivers/usb/storage/option_ms.h
@@ -0,0 +1,4 @@
+#ifndef _OPTION_MS_H_
+#define _OPTION_MS_H_
+extern int option_ms_init(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
new file mode 100644
index 000000000..12e3c2fac
--- /dev/null
+++ b/drivers/usb/storage/protocol.c
@@ -0,0 +1,193 @@
+/* Driver for USB Mass Storage compliant devices
+ *
+ * Current development and maintenance by:
+ * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
+ * (c) 2002 Alan Stern (stern@rowland.org)
+ *
+ * Initial work by:
+ * (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/highmem.h>
+#include <linux/export.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+#include "transport.h"
+
+/***********************************************************************
+ * Protocol routines
+ ***********************************************************************/
+
+void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
+{
+ /*
+ * Pad the SCSI command with zeros out to 12 bytes. If the
+ * command already is 12 bytes or longer, leave it alone.
+ *
+ * NOTE: This only works because a scsi_cmnd struct field contains
+ * a unsigned char cmnd[16], so we know we have storage available
+ */
+ for (; srb->cmd_len < 12; srb->cmd_len++)
+ srb->cmnd[srb->cmd_len] = 0;
+
+ /* send the command to the transport layer */
+ usb_stor_invoke_transport(srb, us);
+}
+
+void usb_stor_ufi_command(struct scsi_cmnd *srb, struct us_data *us)
+{
+ /* fix some commands -- this is a form of mode translation
+ * UFI devices only accept 12 byte long commands
+ *
+ * NOTE: This only works because a scsi_cmnd struct field contains
+ * a unsigned char cmnd[16], so we know we have storage available
+ */
+
+ /* Pad the ATAPI command with zeros */
+ for (; srb->cmd_len < 12; srb->cmd_len++)
+ srb->cmnd[srb->cmd_len] = 0;
+
+ /* set command length to 12 bytes (this affects the transport layer) */
+ srb->cmd_len = 12;
+
+ /* XXX We should be constantly re-evaluating the need for these */
+
+ /* determine the correct data length for these commands */
+ switch (srb->cmnd[0]) {
+
+ /* for INQUIRY, UFI devices only ever return 36 bytes */
+ case INQUIRY:
+ srb->cmnd[4] = 36;
+ break;
+
+ /* again, for MODE_SENSE_10, we get the minimum (8) */
+ case MODE_SENSE_10:
+ srb->cmnd[7] = 0;
+ srb->cmnd[8] = 8;
+ break;
+
+ /* for REQUEST_SENSE, UFI devices only ever return 18 bytes */
+ case REQUEST_SENSE:
+ srb->cmnd[4] = 18;
+ break;
+ } /* end switch on cmnd[0] */
+
+ /* send the command to the transport layer */
+ usb_stor_invoke_transport(srb, us);
+}
+
+void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb,
+ struct us_data *us)
+{
+ /* send the command to the transport layer */
+ usb_stor_invoke_transport(srb, us);
+}
+EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command);
+
+/***********************************************************************
+ * Scatter-gather transfer buffer access routines
+ ***********************************************************************/
+
+/* Copy a buffer of length buflen to/from the srb's transfer buffer.
+ * Update the **sgptr and *offset variables so that the next copy will
+ * pick up from where this one left off.
+ */
+unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
+ unsigned int buflen, struct scsi_cmnd *srb, struct scatterlist **sgptr,
+ unsigned int *offset, enum xfer_buf_dir dir)
+{
+ unsigned int cnt = 0;
+ struct scatterlist *sg = *sgptr;
+ struct sg_mapping_iter miter;
+ unsigned int nents = scsi_sg_count(srb);
+
+ if (sg)
+ nents = sg_nents(sg);
+ else
+ sg = scsi_sglist(srb);
+
+ sg_miter_start(&miter, sg, nents, dir == FROM_XFER_BUF ?
+ SG_MITER_FROM_SG: SG_MITER_TO_SG);
+
+ if (!sg_miter_skip(&miter, *offset))
+ return cnt;
+
+ while (sg_miter_next(&miter) && cnt < buflen) {
+ unsigned int len = min_t(unsigned int, miter.length,
+ buflen - cnt);
+
+ if (dir == FROM_XFER_BUF)
+ memcpy(buffer + cnt, miter.addr, len);
+ else
+ memcpy(miter.addr, buffer + cnt, len);
+
+ if (*offset + len < miter.piter.sg->length) {
+ *offset += len;
+ *sgptr = miter.piter.sg;
+ } else {
+ *offset = 0;
+ *sgptr = sg_next(miter.piter.sg);
+ }
+ cnt += len;
+ }
+ sg_miter_stop(&miter);
+
+ return cnt;
+}
+EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf);
+
+/* Store the contents of buffer into srb's transfer buffer and set the
+ * SCSI residue.
+ */
+void usb_stor_set_xfer_buf(unsigned char *buffer,
+ unsigned int buflen, struct scsi_cmnd *srb)
+{
+ unsigned int offset = 0;
+ struct scatterlist *sg = NULL;
+
+ buflen = min(buflen, scsi_bufflen(srb));
+ buflen = usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset,
+ TO_XFER_BUF);
+ if (buflen < scsi_bufflen(srb))
+ scsi_set_resid(srb, scsi_bufflen(srb) - buflen);
+}
+EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf);
diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h
new file mode 100644
index 000000000..ffc3e2af0
--- /dev/null
+++ b/drivers/usb/storage/protocol.h
@@ -0,0 +1,57 @@
+/* Driver for USB Mass Storage compliant devices
+ * Protocol Functions Header File
+ *
+ * Current development and maintenance by:
+ * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PROTOCOL_H_
+#define _PROTOCOL_H_
+
+/* Protocol handling routines */
+extern void usb_stor_pad12_command(struct scsi_cmnd*, struct us_data*);
+extern void usb_stor_ufi_command(struct scsi_cmnd*, struct us_data*);
+extern void usb_stor_transparent_scsi_command(struct scsi_cmnd*,
+ struct us_data*);
+
+/* struct scsi_cmnd transfer buffer access utilities */
+enum xfer_buf_dir {TO_XFER_BUF, FROM_XFER_BUF};
+
+extern unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
+ unsigned int buflen, struct scsi_cmnd *srb, struct scatterlist **,
+ unsigned int *offset, enum xfer_buf_dir dir);
+
+extern void usb_stor_set_xfer_buf(unsigned char *buffer,
+ unsigned int buflen, struct scsi_cmnd *srb);
+#endif
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
new file mode 100644
index 000000000..27e4a580d
--- /dev/null
+++ b/drivers/usb/storage/realtek_cr.c
@@ -0,0 +1,1073 @@
+/* Driver for Realtek RTS51xx USB card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * wwang (wei_wang@realsil.com.cn)
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/cdrom.h>
+
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/usb_usual.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Driver for Realtek USB Card Reader");
+MODULE_AUTHOR("wwang <wei_wang@realsil.com.cn>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.03");
+
+static int auto_delink_en = 1;
+module_param(auto_delink_en, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(auto_delink_en, "enable auto delink");
+
+#ifdef CONFIG_REALTEK_AUTOPM
+static int ss_en = 1;
+module_param(ss_en, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ss_en, "enable selective suspend");
+
+static int ss_delay = 50;
+module_param(ss_delay, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ss_delay,
+ "seconds to delay before entering selective suspend");
+
+enum RTS51X_STAT {
+ RTS51X_STAT_INIT,
+ RTS51X_STAT_IDLE,
+ RTS51X_STAT_RUN,
+ RTS51X_STAT_SS
+};
+
+#define POLLING_INTERVAL 50
+
+#define rts51x_set_stat(chip, stat) \
+ ((chip)->state = (enum RTS51X_STAT)(stat))
+#define rts51x_get_stat(chip) ((chip)->state)
+
+#define SET_LUN_READY(chip, lun) ((chip)->lun_ready |= ((u8)1 << (lun)))
+#define CLR_LUN_READY(chip, lun) ((chip)->lun_ready &= ~((u8)1 << (lun)))
+#define TST_LUN_READY(chip, lun) ((chip)->lun_ready & ((u8)1 << (lun)))
+
+#endif
+
+struct rts51x_status {
+ u16 vid;
+ u16 pid;
+ u8 cur_lun;
+ u8 card_type;
+ u8 total_lun;
+ u16 fw_ver;
+ u8 phy_exist;
+ u8 multi_flag;
+ u8 multi_card;
+ u8 log_exist;
+ union {
+ u8 detailed_type1;
+ u8 detailed_type2;
+ } detailed_type;
+ u8 function[2];
+};
+
+struct rts51x_chip {
+ u16 vendor_id;
+ u16 product_id;
+ char max_lun;
+
+ struct rts51x_status *status;
+ int status_len;
+
+ u32 flag;
+ struct us_data *us;
+
+#ifdef CONFIG_REALTEK_AUTOPM
+ struct timer_list rts51x_suspend_timer;
+ unsigned long timer_expires;
+ int pwr_state;
+ u8 lun_ready;
+ enum RTS51X_STAT state;
+ int support_auto_delink;
+#endif
+ /* used to back up the protocol chosen in probe1 phase */
+ proto_cmnd proto_handler_backup;
+};
+
+/* flag definition */
+#define FLIDX_AUTO_DELINK 0x01
+
+#define SCSI_LUN(srb) ((srb)->device->lun)
+
+/* Bit Operation */
+#define SET_BIT(data, idx) ((data) |= 1 << (idx))
+#define CLR_BIT(data, idx) ((data) &= ~(1 << (idx)))
+#define CHK_BIT(data, idx) ((data) & (1 << (idx)))
+
+#define SET_AUTO_DELINK(chip) ((chip)->flag |= FLIDX_AUTO_DELINK)
+#define CLR_AUTO_DELINK(chip) ((chip)->flag &= ~FLIDX_AUTO_DELINK)
+#define CHK_AUTO_DELINK(chip) ((chip)->flag & FLIDX_AUTO_DELINK)
+
+#define RTS51X_GET_VID(chip) ((chip)->vendor_id)
+#define RTS51X_GET_PID(chip) ((chip)->product_id)
+
+#define VENDOR_ID(chip) ((chip)->status[0].vid)
+#define PRODUCT_ID(chip) ((chip)->status[0].pid)
+#define FW_VERSION(chip) ((chip)->status[0].fw_ver)
+#define STATUS_LEN(chip) ((chip)->status_len)
+
+#define STATUS_SUCCESS 0
+#define STATUS_FAIL 1
+
+/* Check card reader function */
+#define SUPPORT_DETAILED_TYPE1(chip) \
+ CHK_BIT((chip)->status[0].function[0], 1)
+#define SUPPORT_OT(chip) \
+ CHK_BIT((chip)->status[0].function[0], 2)
+#define SUPPORT_OC(chip) \
+ CHK_BIT((chip)->status[0].function[0], 3)
+#define SUPPORT_AUTO_DELINK(chip) \
+ CHK_BIT((chip)->status[0].function[0], 4)
+#define SUPPORT_SDIO(chip) \
+ CHK_BIT((chip)->status[0].function[1], 0)
+#define SUPPORT_DETAILED_TYPE2(chip) \
+ CHK_BIT((chip)->status[0].function[1], 1)
+
+#define CHECK_PID(chip, pid) (RTS51X_GET_PID(chip) == (pid))
+#define CHECK_FW_VER(chip, fw_ver) (FW_VERSION(chip) == (fw_ver))
+#define CHECK_ID(chip, pid, fw_ver) \
+ (CHECK_PID((chip), (pid)) && CHECK_FW_VER((chip), (fw_ver)))
+
+static int init_realtek_cr(struct us_data *us);
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{\
+ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) \
+}
+
+static const struct usb_device_id realtek_cr_ids[] = {
+# include "unusual_realtek.h"
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, realtek_cr_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev realtek_cr_unusual_dev_list[] = {
+# include "unusual_realtek.h"
+ {} /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+static int rts51x_bulk_transport(struct us_data *us, u8 lun,
+ u8 *cmd, int cmd_len, u8 *buf, int buf_len,
+ enum dma_data_direction dir, int *act_len)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *)us->iobuf;
+ struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *)us->iobuf;
+ int result;
+ unsigned int residue;
+ unsigned int cswlen;
+ unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
+
+ /* set up the command wrapper */
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = cpu_to_le32(buf_len);
+ bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0;
+ bcb->Tag = ++us->tag;
+ bcb->Lun = lun;
+ bcb->Length = cmd_len;
+
+ /* copy the command payload */
+ memset(bcb->CDB, 0, sizeof(bcb->CDB));
+ memcpy(bcb->CDB, cmd, bcb->Length);
+
+ /* send it to out endpoint */
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ bcb, cbwlen, NULL);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* DATA STAGE */
+ /* send/receive data payload, if there is any */
+
+ if (buf && buf_len) {
+ unsigned int pipe = (dir == DMA_FROM_DEVICE) ?
+ us->recv_bulk_pipe : us->send_bulk_pipe;
+ result = usb_stor_bulk_transfer_buf(us, pipe,
+ buf, buf_len, NULL);
+ if (result == USB_STOR_XFER_ERROR)
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* get CSW for device status */
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* check bulk status */
+ if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) {
+ usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n",
+ le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ residue = bcs->Residue;
+ if (bcs->Tag != us->tag)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* try to compute the actual residue, based on how much data
+ * was really transferred and what the device tells us */
+ if (residue)
+ residue = residue < buf_len ? residue : buf_len;
+
+ if (act_len)
+ *act_len = buf_len - residue;
+
+ /* based on the status code, we report good or bad */
+ switch (bcs->Status) {
+ case US_BULK_STAT_OK:
+ /* command good -- note that data could be short */
+ return USB_STOR_TRANSPORT_GOOD;
+
+ case US_BULK_STAT_FAIL:
+ /* command failed */
+ return USB_STOR_TRANSPORT_FAILED;
+
+ case US_BULK_STAT_PHASE:
+ /* phase error -- note that a transport reset will be
+ * invoked by the invoke_transport() function
+ */
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* we should never get here, but if we do, we're in trouble */
+ return USB_STOR_TRANSPORT_ERROR;
+}
+
+static int rts51x_bulk_transport_special(struct us_data *us, u8 lun,
+ u8 *cmd, int cmd_len, u8 *buf, int buf_len,
+ enum dma_data_direction dir, int *act_len)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
+ int result;
+ unsigned int cswlen;
+ unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
+
+ /* set up the command wrapper */
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = cpu_to_le32(buf_len);
+ bcb->Flags = (dir == DMA_FROM_DEVICE) ? US_BULK_FLAG_IN : 0;
+ bcb->Tag = ++us->tag;
+ bcb->Lun = lun;
+ bcb->Length = cmd_len;
+
+ /* copy the command payload */
+ memset(bcb->CDB, 0, sizeof(bcb->CDB));
+ memcpy(bcb->CDB, cmd, bcb->Length);
+
+ /* send it to out endpoint */
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ bcb, cbwlen, NULL);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* DATA STAGE */
+ /* send/receive data payload, if there is any */
+
+ if (buf && buf_len) {
+ unsigned int pipe = (dir == DMA_FROM_DEVICE) ?
+ us->recv_bulk_pipe : us->send_bulk_pipe;
+ result = usb_stor_bulk_transfer_buf(us, pipe,
+ buf, buf_len, NULL);
+ if (result == USB_STOR_XFER_ERROR)
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* get CSW for device status */
+ result = usb_bulk_msg(us->pusb_dev, us->recv_bulk_pipe, bcs,
+ US_BULK_CS_WRAP_LEN, &cswlen, 250);
+ return result;
+}
+
+/* Determine what the maximum LUN supported is */
+static int rts51x_get_max_lun(struct us_data *us)
+{
+ int result;
+
+ /* issue the command */
+ us->iobuf[0] = 0;
+ result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
+ US_BULK_GET_MAX_LUN,
+ USB_DIR_IN | USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE,
+ 0, us->ifnum, us->iobuf, 1, 10 * HZ);
+
+ usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n",
+ result, us->iobuf[0]);
+
+ /* if we have a successful request, return the result */
+ if (result > 0)
+ return us->iobuf[0];
+
+ return 0;
+}
+
+static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
+{
+ int retval;
+ u8 cmnd[12] = { 0 };
+ u8 *buf;
+
+ buf = kmalloc(len, GFP_NOIO);
+ if (buf == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len);
+
+ cmnd[0] = 0xF0;
+ cmnd[1] = 0x0D;
+ cmnd[2] = (u8) (addr >> 8);
+ cmnd[3] = (u8) addr;
+ cmnd[4] = (u8) (len >> 8);
+ cmnd[5] = (u8) len;
+
+ retval = rts51x_bulk_transport(us, 0, cmnd, 12,
+ buf, len, DMA_FROM_DEVICE, NULL);
+ if (retval != USB_STOR_TRANSPORT_GOOD) {
+ kfree(buf);
+ return -EIO;
+ }
+
+ memcpy(data, buf, len);
+ kfree(buf);
+ return 0;
+}
+
+static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
+{
+ int retval;
+ u8 cmnd[12] = { 0 };
+ u8 *buf;
+
+ buf = kmemdup(data, len, GFP_NOIO);
+ if (buf == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len);
+
+ cmnd[0] = 0xF0;
+ cmnd[1] = 0x0E;
+ cmnd[2] = (u8) (addr >> 8);
+ cmnd[3] = (u8) addr;
+ cmnd[4] = (u8) (len >> 8);
+ cmnd[5] = (u8) len;
+
+ retval = rts51x_bulk_transport(us, 0, cmnd, 12,
+ buf, len, DMA_TO_DEVICE, NULL);
+ kfree(buf);
+ if (retval != USB_STOR_TRANSPORT_GOOD)
+ return -EIO;
+
+ return 0;
+}
+
+static int rts51x_read_status(struct us_data *us,
+ u8 lun, u8 *status, int len, int *actlen)
+{
+ int retval;
+ u8 cmnd[12] = { 0 };
+ u8 *buf;
+
+ buf = kmalloc(len, GFP_NOIO);
+ if (buf == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "lun = %d\n", lun);
+
+ cmnd[0] = 0xF0;
+ cmnd[1] = 0x09;
+
+ retval = rts51x_bulk_transport(us, lun, cmnd, 12,
+ buf, len, DMA_FROM_DEVICE, actlen);
+ if (retval != USB_STOR_TRANSPORT_GOOD) {
+ kfree(buf);
+ return -EIO;
+ }
+
+ memcpy(status, buf, len);
+ kfree(buf);
+ return 0;
+}
+
+static int rts51x_check_status(struct us_data *us, u8 lun)
+{
+ struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+ int retval;
+ u8 buf[16];
+
+ retval = rts51x_read_status(us, lun, buf, 16, &(chip->status_len));
+ if (retval != STATUS_SUCCESS)
+ return -EIO;
+
+ usb_stor_dbg(us, "chip->status_len = %d\n", chip->status_len);
+
+ chip->status[lun].vid = ((u16) buf[0] << 8) | buf[1];
+ chip->status[lun].pid = ((u16) buf[2] << 8) | buf[3];
+ chip->status[lun].cur_lun = buf[4];
+ chip->status[lun].card_type = buf[5];
+ chip->status[lun].total_lun = buf[6];
+ chip->status[lun].fw_ver = ((u16) buf[7] << 8) | buf[8];
+ chip->status[lun].phy_exist = buf[9];
+ chip->status[lun].multi_flag = buf[10];
+ chip->status[lun].multi_card = buf[11];
+ chip->status[lun].log_exist = buf[12];
+ if (chip->status_len == 16) {
+ chip->status[lun].detailed_type.detailed_type1 = buf[13];
+ chip->status[lun].function[0] = buf[14];
+ chip->status[lun].function[1] = buf[15];
+ }
+
+ return 0;
+}
+
+static int enable_oscillator(struct us_data *us)
+{
+ int retval;
+ u8 value;
+
+ retval = rts51x_read_mem(us, 0xFE77, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ value |= 0x04;
+ retval = rts51x_write_mem(us, 0xFE77, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ retval = rts51x_read_mem(us, 0xFE77, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ if (!(value & 0x04))
+ return -EIO;
+
+ return 0;
+}
+
+static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len)
+{
+ int retval;
+ u8 cmnd[12] = {0};
+ u8 *buf;
+
+ usb_stor_dbg(us, "addr = 0xfe47, len = %d\n", len);
+
+ buf = kmemdup(data, len, GFP_NOIO);
+ if (!buf)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ cmnd[0] = 0xF0;
+ cmnd[1] = 0x0E;
+ cmnd[2] = 0xfe;
+ cmnd[3] = 0x47;
+ cmnd[4] = (u8)(len >> 8);
+ cmnd[5] = (u8)len;
+
+ retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, buf, len, DMA_TO_DEVICE, NULL);
+ kfree(buf);
+ if (retval != USB_STOR_TRANSPORT_GOOD) {
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int do_config_autodelink(struct us_data *us, int enable, int force)
+{
+ int retval;
+ u8 value;
+
+ retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ if (enable) {
+ if (force)
+ value |= 0x03;
+ else
+ value |= 0x01;
+ } else {
+ value &= ~0x03;
+ }
+
+ usb_stor_dbg(us, "set 0xfe47 to 0x%x\n", value);
+
+ /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+ retval = __do_config_autodelink(us, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int config_autodelink_after_power_on(struct us_data *us)
+{
+ struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+ int retval;
+ u8 value;
+
+ if (!CHK_AUTO_DELINK(chip))
+ return 0;
+
+ retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ if (auto_delink_en) {
+ CLR_BIT(value, 0);
+ CLR_BIT(value, 1);
+ SET_BIT(value, 2);
+
+ if (CHECK_ID(chip, 0x0138, 0x3882))
+ CLR_BIT(value, 2);
+
+ SET_BIT(value, 7);
+
+ /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+ retval = __do_config_autodelink(us, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ retval = enable_oscillator(us);
+ if (retval == 0)
+ (void)do_config_autodelink(us, 1, 0);
+ } else {
+ /* Autodelink controlled by firmware */
+
+ SET_BIT(value, 2);
+
+ if (CHECK_ID(chip, 0x0138, 0x3882))
+ CLR_BIT(value, 2);
+
+ if (CHECK_ID(chip, 0x0159, 0x5889) ||
+ CHECK_ID(chip, 0x0138, 0x3880)) {
+ CLR_BIT(value, 0);
+ CLR_BIT(value, 7);
+ }
+
+ /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+ retval = __do_config_autodelink(us, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ if (CHECK_ID(chip, 0x0159, 0x5888)) {
+ value = 0xFF;
+ retval = rts51x_write_mem(us, 0xFE79, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ value = 0x01;
+ retval = rts51x_write_mem(us, 0x48, &value, 1);
+ if (retval < 0)
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int config_autodelink_before_power_down(struct us_data *us)
+{
+ struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+ int retval;
+ u8 value;
+
+ if (!CHK_AUTO_DELINK(chip))
+ return 0;
+
+ if (auto_delink_en) {
+ retval = rts51x_read_mem(us, 0xFE77, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ SET_BIT(value, 2);
+ retval = rts51x_write_mem(us, 0xFE77, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ if (CHECK_ID(chip, 0x0159, 0x5888)) {
+ value = 0x01;
+ retval = rts51x_write_mem(us, 0x48, &value, 1);
+ if (retval < 0)
+ return -EIO;
+ }
+
+ retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ SET_BIT(value, 0);
+ if (CHECK_ID(chip, 0x0138, 0x3882))
+ SET_BIT(value, 2);
+ retval = rts51x_write_mem(us, 0xFE77, &value, 1);
+ if (retval < 0)
+ return -EIO;
+ } else {
+ if (CHECK_ID(chip, 0x0159, 0x5889) ||
+ CHECK_ID(chip, 0x0138, 0x3880) ||
+ CHECK_ID(chip, 0x0138, 0x3882)) {
+ retval = rts51x_read_mem(us, 0xFE47, &value, 1);
+ if (retval < 0)
+ return -EIO;
+
+ if (CHECK_ID(chip, 0x0159, 0x5889) ||
+ CHECK_ID(chip, 0x0138, 0x3880)) {
+ SET_BIT(value, 0);
+ SET_BIT(value, 7);
+ }
+
+ if (CHECK_ID(chip, 0x0138, 0x3882))
+ SET_BIT(value, 2);
+
+ /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+ retval = __do_config_autodelink(us, &value, 1);
+ if (retval < 0)
+ return -EIO;
+ }
+
+ if (CHECK_ID(chip, 0x0159, 0x5888)) {
+ value = 0x01;
+ retval = rts51x_write_mem(us, 0x48, &value, 1);
+ if (retval < 0)
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+static void fw5895_init(struct us_data *us)
+{
+ struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+ int retval;
+ u8 val;
+
+ if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) {
+ usb_stor_dbg(us, "Not the specified device, return immediately!\n");
+ } else {
+ retval = rts51x_read_mem(us, 0xFD6F, &val, 1);
+ if (retval == STATUS_SUCCESS && (val & 0x1F) == 0) {
+ val = 0x1F;
+ retval = rts51x_write_mem(us, 0xFD70, &val, 1);
+ if (retval != STATUS_SUCCESS)
+ usb_stor_dbg(us, "Write memory fail\n");
+ } else {
+ usb_stor_dbg(us, "Read memory fail, OR (val & 0x1F) != 0\n");
+ }
+ }
+}
+#endif
+
+#ifdef CONFIG_REALTEK_AUTOPM
+static void fw5895_set_mmc_wp(struct us_data *us)
+{
+ struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+ int retval;
+ u8 buf[13];
+
+ if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) {
+ usb_stor_dbg(us, "Not the specified device, return immediately!\n");
+ } else {
+ retval = rts51x_read_mem(us, 0xFD6F, buf, 1);
+ if (retval == STATUS_SUCCESS && (buf[0] & 0x24) == 0x24) {
+ /* SD Exist and SD WP */
+ retval = rts51x_read_mem(us, 0xD04E, buf, 1);
+ if (retval == STATUS_SUCCESS) {
+ buf[0] |= 0x04;
+ retval = rts51x_write_mem(us, 0xFD70, buf, 1);
+ if (retval != STATUS_SUCCESS)
+ usb_stor_dbg(us, "Write memory fail\n");
+ } else {
+ usb_stor_dbg(us, "Read memory fail\n");
+ }
+ } else {
+ usb_stor_dbg(us, "Read memory fail, OR (buf[0]&0x24)!=0x24\n");
+ }
+ }
+}
+
+static void rts51x_modi_suspend_timer(struct rts51x_chip *chip)
+{
+ struct us_data *us = chip->us;
+
+ usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip));
+
+ chip->timer_expires = jiffies + msecs_to_jiffies(1000*ss_delay);
+ mod_timer(&chip->rts51x_suspend_timer, chip->timer_expires);
+}
+
+static void rts51x_suspend_timer_fn(unsigned long data)
+{
+ struct rts51x_chip *chip = (struct rts51x_chip *)data;
+ struct us_data *us = chip->us;
+
+ switch (rts51x_get_stat(chip)) {
+ case RTS51X_STAT_INIT:
+ case RTS51X_STAT_RUN:
+ rts51x_modi_suspend_timer(chip);
+ break;
+ case RTS51X_STAT_IDLE:
+ case RTS51X_STAT_SS:
+ usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n",
+ atomic_read(&us->pusb_intf->pm_usage_cnt),
+ atomic_read(&us->pusb_intf->dev.power.usage_count));
+
+ if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) {
+ usb_stor_dbg(us, "Ready to enter SS state\n");
+ rts51x_set_stat(chip, RTS51X_STAT_SS);
+ /* ignore mass storage interface's children */
+ pm_suspend_ignore_children(&us->pusb_intf->dev, true);
+ usb_autopm_put_interface_async(us->pusb_intf);
+ usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n",
+ atomic_read(&us->pusb_intf->pm_usage_cnt),
+ atomic_read(&us->pusb_intf->dev.power.usage_count));
+ }
+ break;
+ default:
+ usb_stor_dbg(us, "Unknown state !!!\n");
+ break;
+ }
+}
+
+static inline int working_scsi(struct scsi_cmnd *srb)
+{
+ if ((srb->cmnd[0] == TEST_UNIT_READY) ||
+ (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL)) {
+ return 0;
+ }
+
+ return 1;
+}
+
+static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+ static int card_first_show = 1;
+ static u8 media_not_present[] = { 0x70, 0, 0x02, 0, 0, 0, 0,
+ 10, 0, 0, 0, 0, 0x3A, 0, 0, 0, 0, 0
+ };
+ static u8 invalid_cmd_field[] = { 0x70, 0, 0x05, 0, 0, 0, 0,
+ 10, 0, 0, 0, 0, 0x24, 0, 0, 0, 0, 0
+ };
+ int ret;
+
+ if (working_scsi(srb)) {
+ usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n",
+ atomic_read(&us->pusb_intf->pm_usage_cnt),
+ atomic_read(&us->pusb_intf->dev.power.usage_count));
+
+ if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) {
+ ret = usb_autopm_get_interface(us->pusb_intf);
+ usb_stor_dbg(us, "working scsi, ret=%d\n", ret);
+ }
+ if (rts51x_get_stat(chip) != RTS51X_STAT_RUN)
+ rts51x_set_stat(chip, RTS51X_STAT_RUN);
+ chip->proto_handler_backup(srb, us);
+ } else {
+ if (rts51x_get_stat(chip) == RTS51X_STAT_SS) {
+ usb_stor_dbg(us, "NOT working scsi\n");
+ if ((srb->cmnd[0] == TEST_UNIT_READY) &&
+ (chip->pwr_state == US_SUSPEND)) {
+ if (TST_LUN_READY(chip, srb->device->lun)) {
+ srb->result = SAM_STAT_GOOD;
+ } else {
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ memcpy(srb->sense_buffer,
+ media_not_present,
+ US_SENSE_SIZE);
+ }
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
+ goto out;
+ }
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+ int prevent = srb->cmnd[4] & 0x1;
+ if (prevent) {
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ memcpy(srb->sense_buffer,
+ invalid_cmd_field,
+ US_SENSE_SIZE);
+ } else {
+ srb->result = SAM_STAT_GOOD;
+ }
+ usb_stor_dbg(us, "ALLOW_MEDIUM_REMOVAL\n");
+ goto out;
+ }
+ } else {
+ usb_stor_dbg(us, "NOT working scsi, not SS\n");
+ chip->proto_handler_backup(srb, us);
+ /* Check whether card is plugged in */
+ if (srb->cmnd[0] == TEST_UNIT_READY) {
+ if (srb->result == SAM_STAT_GOOD) {
+ SET_LUN_READY(chip, srb->device->lun);
+ if (card_first_show) {
+ card_first_show = 0;
+ fw5895_set_mmc_wp(us);
+ }
+ } else {
+ CLR_LUN_READY(chip, srb->device->lun);
+ card_first_show = 1;
+ }
+ }
+ if (rts51x_get_stat(chip) != RTS51X_STAT_IDLE)
+ rts51x_set_stat(chip, RTS51X_STAT_IDLE);
+ }
+ }
+out:
+ usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip));
+ if (rts51x_get_stat(chip) == RTS51X_STAT_RUN)
+ rts51x_modi_suspend_timer(chip);
+}
+
+static int realtek_cr_autosuspend_setup(struct us_data *us)
+{
+ struct rts51x_chip *chip;
+ struct rts51x_status *status = NULL;
+ u8 buf[16];
+ int retval;
+
+ chip = (struct rts51x_chip *)us->extra;
+ chip->support_auto_delink = 0;
+ chip->pwr_state = US_RESUME;
+ chip->lun_ready = 0;
+ rts51x_set_stat(chip, RTS51X_STAT_INIT);
+
+ retval = rts51x_read_status(us, 0, buf, 16, &(chip->status_len));
+ if (retval != STATUS_SUCCESS) {
+ usb_stor_dbg(us, "Read status fail\n");
+ return -EIO;
+ }
+ status = chip->status;
+ status->vid = ((u16) buf[0] << 8) | buf[1];
+ status->pid = ((u16) buf[2] << 8) | buf[3];
+ status->cur_lun = buf[4];
+ status->card_type = buf[5];
+ status->total_lun = buf[6];
+ status->fw_ver = ((u16) buf[7] << 8) | buf[8];
+ status->phy_exist = buf[9];
+ status->multi_flag = buf[10];
+ status->multi_card = buf[11];
+ status->log_exist = buf[12];
+ if (chip->status_len == 16) {
+ status->detailed_type.detailed_type1 = buf[13];
+ status->function[0] = buf[14];
+ status->function[1] = buf[15];
+ }
+
+ /* back up the proto_handler in us->extra */
+ chip = (struct rts51x_chip *)(us->extra);
+ chip->proto_handler_backup = us->proto_handler;
+ /* Set the autosuspend_delay to 0 */
+ pm_runtime_set_autosuspend_delay(&us->pusb_dev->dev, 0);
+ /* override us->proto_handler setted in get_protocol() */
+ us->proto_handler = rts51x_invoke_transport;
+
+ chip->timer_expires = 0;
+ setup_timer(&chip->rts51x_suspend_timer, rts51x_suspend_timer_fn,
+ (unsigned long)chip);
+ fw5895_init(us);
+
+ /* enable autosuspend function of the usb device */
+ usb_enable_autosuspend(us->pusb_dev);
+
+ return 0;
+}
+#endif
+
+static void realtek_cr_destructor(void *extra)
+{
+ struct rts51x_chip *chip = extra;
+
+ if (!chip)
+ return;
+
+#ifdef CONFIG_REALTEK_AUTOPM
+ if (ss_en) {
+ del_timer(&chip->rts51x_suspend_timer);
+ chip->timer_expires = 0;
+ }
+#endif
+ kfree(chip->status);
+}
+
+#ifdef CONFIG_PM
+static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ /* wait until no command is running */
+ mutex_lock(&us->dev_mutex);
+
+ config_autodelink_before_power_down(us);
+
+ mutex_unlock(&us->dev_mutex);
+
+ return 0;
+}
+
+static int realtek_cr_resume(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ fw5895_init(us);
+ config_autodelink_after_power_on(us);
+
+ return 0;
+}
+#else
+#define realtek_cr_suspend NULL
+#define realtek_cr_resume NULL
+#endif
+
+static int init_realtek_cr(struct us_data *us)
+{
+ struct rts51x_chip *chip;
+ int size, i, retval;
+
+ chip = kzalloc(sizeof(struct rts51x_chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ us->extra = chip;
+ us->extra_destructor = realtek_cr_destructor;
+ us->max_lun = chip->max_lun = rts51x_get_max_lun(us);
+ chip->us = us;
+
+ usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun);
+
+ size = (chip->max_lun + 1) * sizeof(struct rts51x_status);
+ chip->status = kzalloc(size, GFP_KERNEL);
+ if (!chip->status)
+ goto INIT_FAIL;
+
+ for (i = 0; i <= (int)(chip->max_lun); i++) {
+ retval = rts51x_check_status(us, (u8) i);
+ if (retval < 0)
+ goto INIT_FAIL;
+ }
+
+ if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) ||
+ CHECK_FW_VER(chip, 0x5901))
+ SET_AUTO_DELINK(chip);
+ if (STATUS_LEN(chip) == 16) {
+ if (SUPPORT_AUTO_DELINK(chip))
+ SET_AUTO_DELINK(chip);
+ }
+#ifdef CONFIG_REALTEK_AUTOPM
+ if (ss_en)
+ realtek_cr_autosuspend_setup(us);
+#endif
+
+ usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag);
+
+ (void)config_autodelink_after_power_on(us);
+
+ return 0;
+
+INIT_FAIL:
+ if (us->extra) {
+ kfree(chip->status);
+ kfree(us->extra);
+ us->extra = NULL;
+ }
+
+ return -EIO;
+}
+
+static int realtek_cr_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ dev_dbg(&intf->dev, "Probe Realtek Card Reader!\n");
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - realtek_cr_ids) +
+ realtek_cr_unusual_dev_list);
+ if (result)
+ return result;
+
+ result = usb_stor_probe2(us);
+
+ return result;
+}
+
+static struct usb_driver realtek_cr_driver = {
+ .name = "ums-realtek",
+ .probe = realtek_cr_probe,
+ .disconnect = usb_stor_disconnect,
+ /* .suspend = usb_stor_suspend, */
+ /* .resume = usb_stor_resume, */
+ .reset_resume = usb_stor_reset_resume,
+ .suspend = realtek_cr_suspend,
+ .resume = realtek_cr_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = realtek_cr_ids,
+ .soft_unbind = 1,
+ .supports_autosuspend = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(realtek_cr_driver);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
new file mode 100644
index 000000000..0e400f382
--- /dev/null
+++ b/drivers/usb/storage/scsiglue.c
@@ -0,0 +1,602 @@
+/* Driver for USB Mass Storage compliant devices
+ * SCSI layer glue code
+ *
+ * Current development and maintenance by:
+ * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
+ * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
+ *
+ * Initial work by:
+ * (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_devinfo.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+
+#include "usb.h"
+#include "scsiglue.h"
+#include "debug.h"
+#include "transport.h"
+#include "protocol.h"
+
+/* Vendor IDs for companies that seem to include the READ CAPACITY bug
+ * in all their devices
+ */
+#define VENDOR_ID_NOKIA 0x0421
+#define VENDOR_ID_NIKON 0x04b0
+#define VENDOR_ID_PENTAX 0x0a17
+#define VENDOR_ID_MOTOROLA 0x22b8
+
+/***********************************************************************
+ * Host functions
+ ***********************************************************************/
+
+static const char* host_info(struct Scsi_Host *host)
+{
+ struct us_data *us = host_to_us(host);
+ return us->scsi_name;
+}
+
+static int slave_alloc (struct scsi_device *sdev)
+{
+ struct us_data *us = host_to_us(sdev->host);
+
+ /*
+ * Set the INQUIRY transfer length to 36. We don't use any of
+ * the extra data and many devices choke if asked for more or
+ * less than 36 bytes.
+ */
+ sdev->inquiry_len = 36;
+
+ /* USB has unusual DMA-alignment requirements: Although the
+ * starting address of each scatter-gather element doesn't matter,
+ * the length of each element except the last must be divisible
+ * by the Bulk maxpacket value. There's currently no way to
+ * express this by block-layer constraints, so we'll cop out
+ * and simply require addresses to be aligned at 512-byte
+ * boundaries. This is okay since most block I/O involves
+ * hardware sectors that are multiples of 512 bytes in length,
+ * and since host controllers up through USB 2.0 have maxpacket
+ * values no larger than 512.
+ *
+ * But it doesn't suffice for Wireless USB, where Bulk maxpacket
+ * values can be as large as 2048. To make that work properly
+ * will require changes to the block layer.
+ */
+ blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+
+ /* Tell the SCSI layer if we know there is more than one LUN */
+ if (us->protocol == USB_PR_BULK && us->max_lun > 0)
+ sdev->sdev_bflags |= BLIST_FORCELUN;
+
+ return 0;
+}
+
+static int slave_configure(struct scsi_device *sdev)
+{
+ struct us_data *us = host_to_us(sdev->host);
+
+ /* Many devices have trouble transferring more than 32KB at a time,
+ * while others have trouble with more than 64K. At this time we
+ * are limiting both to 32K (64 sectores).
+ */
+ if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
+ unsigned int max_sectors = 64;
+
+ if (us->fflags & US_FL_MAX_SECTORS_MIN)
+ max_sectors = PAGE_CACHE_SIZE >> 9;
+ if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
+ blk_queue_max_hw_sectors(sdev->request_queue,
+ max_sectors);
+ } else if (sdev->type == TYPE_TAPE) {
+ /* Tapes need much higher max_sector limits, so just
+ * raise it to the maximum possible (4 GB / 512) and
+ * let the queue segment size sort out the real limit.
+ */
+ blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
+ }
+
+ /* Some USB host controllers can't do DMA; they have to use PIO.
+ * They indicate this by setting their dma_mask to NULL. For
+ * such controllers we need to make sure the block layer sets
+ * up bounce buffers in addressable memory.
+ */
+ if (!us->pusb_dev->bus->controller->dma_mask)
+ blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
+
+ /* We can't put these settings in slave_alloc() because that gets
+ * called before the device type is known. Consequently these
+ * settings can't be overridden via the scsi devinfo mechanism. */
+ if (sdev->type == TYPE_DISK) {
+
+ /* Some vendors seem to put the READ CAPACITY bug into
+ * all their devices -- primarily makers of cell phones
+ * and digital cameras. Since these devices always use
+ * flash media and can be expected to have an even number
+ * of sectors, we will always enable the CAPACITY_HEURISTICS
+ * flag unless told otherwise. */
+ switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
+ case VENDOR_ID_NOKIA:
+ case VENDOR_ID_NIKON:
+ case VENDOR_ID_PENTAX:
+ case VENDOR_ID_MOTOROLA:
+ if (!(us->fflags & (US_FL_FIX_CAPACITY |
+ US_FL_CAPACITY_OK)))
+ us->fflags |= US_FL_CAPACITY_HEURISTICS;
+ break;
+ }
+
+ /* Disk-type devices use MODE SENSE(6) if the protocol
+ * (SubClass) is Transparent SCSI, otherwise they use
+ * MODE SENSE(10). */
+ if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
+ sdev->use_10_for_ms = 1;
+
+ /* Many disks only accept MODE SENSE transfer lengths of
+ * 192 bytes (that's what Windows uses). */
+ sdev->use_192_bytes_for_3f = 1;
+
+ /* Some devices don't like MODE SENSE with page=0x3f,
+ * which is the command used for checking if a device
+ * is write-protected. Now that we tell the sd driver
+ * to do a 192-byte transfer with this command the
+ * majority of devices work fine, but a few still can't
+ * handle it. The sd driver will simply assume those
+ * devices are write-enabled. */
+ if (us->fflags & US_FL_NO_WP_DETECT)
+ sdev->skip_ms_page_3f = 1;
+
+ /* A number of devices have problems with MODE SENSE for
+ * page x08, so we will skip it. */
+ sdev->skip_ms_page_8 = 1;
+
+ /* Some devices don't handle VPD pages correctly */
+ sdev->skip_vpd_pages = 1;
+
+ /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */
+ sdev->no_report_opcodes = 1;
+
+ /* Do not attempt to use WRITE SAME */
+ sdev->no_write_same = 1;
+
+ /* Some disks return the total number of blocks in response
+ * to READ CAPACITY rather than the highest block number.
+ * If this device makes that mistake, tell the sd driver. */
+ if (us->fflags & US_FL_FIX_CAPACITY)
+ sdev->fix_capacity = 1;
+
+ /* A few disks have two indistinguishable version, one of
+ * which reports the correct capacity and the other does not.
+ * The sd driver has to guess which is the case. */
+ if (us->fflags & US_FL_CAPACITY_HEURISTICS)
+ sdev->guess_capacity = 1;
+
+ /* Some devices cannot handle READ_CAPACITY_16 */
+ if (us->fflags & US_FL_NO_READ_CAPACITY_16)
+ sdev->no_read_capacity_16 = 1;
+
+ /*
+ * Many devices do not respond properly to READ_CAPACITY_16.
+ * Tell the SCSI layer to try READ_CAPACITY_10 first.
+ * However some USB 3.0 drive enclosures return capacity
+ * modulo 2TB. Those must use READ_CAPACITY_16
+ */
+ if (!(us->fflags & US_FL_NEEDS_CAP16))
+ sdev->try_rc_10_first = 1;
+
+ /* assume SPC3 or latter devices support sense size > 18 */
+ if (sdev->scsi_level > SCSI_SPC_2)
+ us->fflags |= US_FL_SANE_SENSE;
+
+ /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
+ * Hardware Error) when any low-level error occurs,
+ * recoverable or not. Setting this flag tells the SCSI
+ * midlayer to retry such commands, which frequently will
+ * succeed and fix the error. The worst this can lead to
+ * is an occasional series of retries that will all fail. */
+ sdev->retry_hwerror = 1;
+
+ /* USB disks should allow restart. Some drives spin down
+ * automatically, requiring a START-STOP UNIT command. */
+ sdev->allow_restart = 1;
+
+ /* Some USB cardreaders have trouble reading an sdcard's last
+ * sector in a larger then 1 sector read, since the performance
+ * impact is negligible we set this flag for all USB disks */
+ sdev->last_sector_bug = 1;
+
+ /* Enable last-sector hacks for single-target devices using
+ * the Bulk-only transport, unless we already know the
+ * capacity will be decremented or is correct. */
+ if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
+ US_FL_SCM_MULT_TARG)) &&
+ us->protocol == USB_PR_BULK)
+ us->use_last_sector_hacks = 1;
+
+ /* Check if write cache default on flag is set or not */
+ if (us->fflags & US_FL_WRITE_CACHE)
+ sdev->wce_default_on = 1;
+
+ /* A few buggy USB-ATA bridges don't understand FUA */
+ if (us->fflags & US_FL_BROKEN_FUA)
+ sdev->broken_fua = 1;
+
+ } else {
+
+ /* Non-disk-type devices don't need to blacklist any pages
+ * or to force 192-byte transfer lengths for MODE SENSE.
+ * But they do need to use MODE SENSE(10). */
+ sdev->use_10_for_ms = 1;
+
+ /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
+ if (us->fflags & US_FL_NO_READ_DISC_INFO)
+ sdev->no_read_disc_info = 1;
+ }
+
+ /* The CB and CBI transports have no way to pass LUN values
+ * other than the bits in the second byte of a CDB. But those
+ * bits don't get set to the LUN value if the device reports
+ * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
+ * be single-LUN.
+ */
+ if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
+ sdev->scsi_level == SCSI_UNKNOWN)
+ us->max_lun = 0;
+
+ /* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
+ * REMOVAL command, so suppress those commands. */
+ if (us->fflags & US_FL_NOT_LOCKABLE)
+ sdev->lockable = 0;
+
+ /* this is to satisfy the compiler, tho I don't think the
+ * return code is ever checked anywhere. */
+ return 0;
+}
+
+static int target_alloc(struct scsi_target *starget)
+{
+ struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
+
+ /*
+ * Some USB drives don't support REPORT LUNS, even though they
+ * report a SCSI revision level above 2. Tell the SCSI layer
+ * not to issue that command; it will perform a normal sequential
+ * scan instead.
+ */
+ starget->no_report_luns = 1;
+
+ /*
+ * The UFI spec treats the Peripheral Qualifier bits in an
+ * INQUIRY result as reserved and requires devices to set them
+ * to 0. However the SCSI spec requires these bits to be set
+ * to 3 to indicate when a LUN is not present.
+ *
+ * Let the scanning code know if this target merely sets
+ * Peripheral Device Type to 0x1f to indicate no LUN.
+ */
+ if (us->subclass == USB_SC_UFI)
+ starget->pdt_1f_for_no_lun = 1;
+
+ return 0;
+}
+
+/* queue a command */
+/* This is always called with scsi_lock(host) held */
+static int queuecommand_lck(struct scsi_cmnd *srb,
+ void (*done)(struct scsi_cmnd *))
+{
+ struct us_data *us = host_to_us(srb->device->host);
+
+ /* check for state-transition errors */
+ if (us->srb != NULL) {
+ printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
+ __func__, us->srb);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ /* fail the command if we are disconnecting */
+ if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
+ usb_stor_dbg(us, "Fail command during disconnect\n");
+ srb->result = DID_NO_CONNECT << 16;
+ done(srb);
+ return 0;
+ }
+
+ /* enqueue the command and wake up the control thread */
+ srb->scsi_done = done;
+ us->srb = srb;
+ complete(&us->cmnd_ready);
+
+ return 0;
+}
+
+static DEF_SCSI_QCMD(queuecommand)
+
+/***********************************************************************
+ * Error handling functions
+ ***********************************************************************/
+
+/* Command timeout and abort */
+static int command_abort(struct scsi_cmnd *srb)
+{
+ struct us_data *us = host_to_us(srb->device->host);
+
+ usb_stor_dbg(us, "%s called\n", __func__);
+
+ /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
+ * bits are protected by the host lock. */
+ scsi_lock(us_to_host(us));
+
+ /* Is this command still active? */
+ if (us->srb != srb) {
+ scsi_unlock(us_to_host(us));
+ usb_stor_dbg(us, "-- nothing to abort\n");
+ return FAILED;
+ }
+
+ /* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
+ * a device reset isn't already in progress (to avoid interfering
+ * with the reset). Note that we must retain the host lock while
+ * calling usb_stor_stop_transport(); otherwise it might interfere
+ * with an auto-reset that begins as soon as we release the lock. */
+ set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
+ if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
+ set_bit(US_FLIDX_ABORTING, &us->dflags);
+ usb_stor_stop_transport(us);
+ }
+ scsi_unlock(us_to_host(us));
+
+ /* Wait for the aborted command to finish */
+ wait_for_completion(&us->notify);
+ return SUCCESS;
+}
+
+/* This invokes the transport reset mechanism to reset the state of the
+ * device */
+static int device_reset(struct scsi_cmnd *srb)
+{
+ struct us_data *us = host_to_us(srb->device->host);
+ int result;
+
+ usb_stor_dbg(us, "%s called\n", __func__);
+
+ /* lock the device pointers and do the reset */
+ mutex_lock(&(us->dev_mutex));
+ result = us->transport_reset(us);
+ mutex_unlock(&us->dev_mutex);
+
+ return result < 0 ? FAILED : SUCCESS;
+}
+
+/* Simulate a SCSI bus reset by resetting the device's USB port. */
+static int bus_reset(struct scsi_cmnd *srb)
+{
+ struct us_data *us = host_to_us(srb->device->host);
+ int result;
+
+ usb_stor_dbg(us, "%s called\n", __func__);
+
+ result = usb_stor_port_reset(us);
+ return result < 0 ? FAILED : SUCCESS;
+}
+
+/* Report a driver-initiated device reset to the SCSI layer.
+ * Calling this for a SCSI-initiated reset is unnecessary but harmless.
+ * The caller must own the SCSI host lock. */
+void usb_stor_report_device_reset(struct us_data *us)
+{
+ int i;
+ struct Scsi_Host *host = us_to_host(us);
+
+ scsi_report_device_reset(host, 0, 0);
+ if (us->fflags & US_FL_SCM_MULT_TARG) {
+ for (i = 1; i < host->max_id; ++i)
+ scsi_report_device_reset(host, 0, i);
+ }
+}
+
+/* Report a driver-initiated bus reset to the SCSI layer.
+ * Calling this for a SCSI-initiated reset is unnecessary but harmless.
+ * The caller must not own the SCSI host lock. */
+void usb_stor_report_bus_reset(struct us_data *us)
+{
+ struct Scsi_Host *host = us_to_host(us);
+
+ scsi_lock(host);
+ scsi_report_bus_reset(host, 0);
+ scsi_unlock(host);
+}
+
+/***********************************************************************
+ * /proc/scsi/ functions
+ ***********************************************************************/
+
+static int write_info(struct Scsi_Host *host, char *buffer, int length)
+{
+ /* if someone is sending us data, just throw it away */
+ return length;
+}
+
+/* we use this macro to help us write into the buffer */
+#undef SPRINTF
+#define SPRINTF(args...) seq_printf(m, ## args)
+
+static int show_info (struct seq_file *m, struct Scsi_Host *host)
+{
+ struct us_data *us = host_to_us(host);
+ const char *string;
+
+ /* print the controller name */
+ SPRINTF(" Host scsi%d: usb-storage\n", host->host_no);
+
+ /* print product, vendor, and serial number strings */
+ if (us->pusb_dev->manufacturer)
+ string = us->pusb_dev->manufacturer;
+ else if (us->unusual_dev->vendorName)
+ string = us->unusual_dev->vendorName;
+ else
+ string = "Unknown";
+ SPRINTF(" Vendor: %s\n", string);
+ if (us->pusb_dev->product)
+ string = us->pusb_dev->product;
+ else if (us->unusual_dev->productName)
+ string = us->unusual_dev->productName;
+ else
+ string = "Unknown";
+ SPRINTF(" Product: %s\n", string);
+ if (us->pusb_dev->serial)
+ string = us->pusb_dev->serial;
+ else
+ string = "None";
+ SPRINTF("Serial Number: %s\n", string);
+
+ /* show the protocol and transport */
+ SPRINTF(" Protocol: %s\n", us->protocol_name);
+ SPRINTF(" Transport: %s\n", us->transport_name);
+
+ /* show the device flags */
+ SPRINTF(" Quirks:");
+
+#define US_FLAG(name, value) \
+ if (us->fflags & value) seq_printf(m, " " #name);
+US_DO_ALL_FLAGS
+#undef US_FLAG
+ seq_putc(m, '\n');
+ return 0;
+}
+
+/***********************************************************************
+ * Sysfs interface
+ ***********************************************************************/
+
+/* Output routine for the sysfs max_sectors file */
+static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
+}
+
+/* Input routine for the sysfs max_sectors file */
+static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ unsigned short ms;
+
+ if (sscanf(buf, "%hu", &ms) > 0) {
+ blk_queue_max_hw_sectors(sdev->request_queue, ms);
+ return count;
+ }
+ return -EINVAL;
+}
+static DEVICE_ATTR_RW(max_sectors);
+
+static struct device_attribute *sysfs_device_attr_list[] = {
+ &dev_attr_max_sectors,
+ NULL,
+};
+
+/*
+ * this defines our host template, with which we'll allocate hosts
+ */
+
+struct scsi_host_template usb_stor_host_template = {
+ /* basic userland interface stuff */
+ .name = "usb-storage",
+ .proc_name = "usb-storage",
+ .show_info = show_info,
+ .write_info = write_info,
+ .info = host_info,
+
+ /* command interface -- queued only */
+ .queuecommand = queuecommand,
+
+ /* error and abort handlers */
+ .eh_abort_handler = command_abort,
+ .eh_device_reset_handler = device_reset,
+ .eh_bus_reset_handler = bus_reset,
+
+ /* queue commands only, only one command per LUN */
+ .can_queue = 1,
+ .cmd_per_lun = 1,
+
+ /* unknown initiator id */
+ .this_id = -1,
+
+ .slave_alloc = slave_alloc,
+ .slave_configure = slave_configure,
+ .target_alloc = target_alloc,
+
+ /* lots of sg segments can be handled */
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+
+ /* limit the total size of a transfer to 120 KB */
+ .max_sectors = 240,
+
+ /* merge commands... this seems to help performance, but
+ * periodically someone should test to see which setting is more
+ * optimal.
+ */
+ .use_clustering = 1,
+
+ /* emulated HBA */
+ .emulated = 1,
+
+ /* we do our own delay after a device or bus reset */
+ .skip_settle_delay = 1,
+
+ /* sysfs device attributes */
+ .sdev_attrs = sysfs_device_attr_list,
+
+ /* module management */
+ .module = THIS_MODULE
+};
+
+/* To Report "Illegal Request: Invalid Field in CDB */
+unsigned char usb_stor_sense_invalidCDB[18] = {
+ [0] = 0x70, /* current error */
+ [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */
+ [7] = 0x0a, /* additional length */
+ [12] = 0x24 /* Invalid Field in CDB */
+};
+EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
diff --git a/drivers/usb/storage/scsiglue.h b/drivers/usb/storage/scsiglue.h
new file mode 100644
index 000000000..ffa1cca93
--- /dev/null
+++ b/drivers/usb/storage/scsiglue.h
@@ -0,0 +1,48 @@
+/* Driver for USB Mass Storage compliant devices
+ * SCSI Connecting Glue Header File
+ *
+ * Current development and maintenance by:
+ * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SCSIGLUE_H_
+#define _SCSIGLUE_H_
+
+extern void usb_stor_report_device_reset(struct us_data *us);
+extern void usb_stor_report_bus_reset(struct us_data *us);
+
+extern unsigned char usb_stor_sense_invalidCDB[18];
+extern struct scsi_host_template usb_stor_host_template;
+
+#endif
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
new file mode 100644
index 000000000..3847053d7
--- /dev/null
+++ b/drivers/usb/storage/sddr09.c
@@ -0,0 +1,1782 @@
+/* Driver for SanDisk SDDR-09 SmartMedia reader
+ *
+ * (c) 2000, 2001 Robert Baruch (autophile@starband.net)
+ * (c) 2002 Andries Brouwer (aeb@cwi.nl)
+ * Developed with the assistance of:
+ * (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * The SanDisk SDDR-09 SmartMedia reader uses the Shuttle EUSB-01 chip.
+ * This chip is a programmable USB controller. In the SDDR-09, it has
+ * been programmed to obey a certain limited set of SCSI commands.
+ * This driver translates the "real" SCSI commands to the SDDR-09 SCSI
+ * commands.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Known vendor commands: 12 bytes, first byte is opcode
+ *
+ * E7: read scatter gather
+ * E8: read
+ * E9: write
+ * EA: erase
+ * EB: reset
+ * EC: read status
+ * ED: read ID
+ * EE: write CIS (?)
+ * EF: compute checksum (?)
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader");
+MODULE_AUTHOR("Andries Brouwer <aeb@cwi.nl>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+
+static int usb_stor_sddr09_dpcm_init(struct us_data *us);
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
+static int usb_stor_sddr09_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id sddr09_usb_ids[] = {
+# include "unusual_sddr09.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr09_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev sddr09_unusual_dev_list[] = {
+# include "unusual_sddr09.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+/*
+ * First some stuff that does not belong here:
+ * data on SmartMedia and other cards, completely
+ * unrelated to this driver.
+ * Similar stuff occurs in <linux/mtd/nand_ids.h>.
+ */
+
+struct nand_flash_dev {
+ int model_id;
+ int chipshift; /* 1<<cs bytes total capacity */
+ char pageshift; /* 1<<ps bytes in a page */
+ char blockshift; /* 1<<bs pages in an erase block */
+ char zoneshift; /* 1<<zs blocks in a zone */
+ /* # of logical blocks is 125/128 of this */
+ char pageadrlen; /* length of an address in bytes - 1 */
+};
+
+/*
+ * NAND Flash Manufacturer ID Codes
+ */
+#define NAND_MFR_AMD 0x01
+#define NAND_MFR_NATSEMI 0x8f
+#define NAND_MFR_TOSHIBA 0x98
+#define NAND_MFR_SAMSUNG 0xec
+
+static inline char *nand_flash_manufacturer(int manuf_id) {
+ switch(manuf_id) {
+ case NAND_MFR_AMD:
+ return "AMD";
+ case NAND_MFR_NATSEMI:
+ return "NATSEMI";
+ case NAND_MFR_TOSHIBA:
+ return "Toshiba";
+ case NAND_MFR_SAMSUNG:
+ return "Samsung";
+ default:
+ return "unknown";
+ }
+}
+
+/*
+ * It looks like it is unnecessary to attach manufacturer to the
+ * remaining data: SSFDC prescribes manufacturer-independent id codes.
+ *
+ * 256 MB NAND flash has a 5-byte ID with 2nd byte 0xaa, 0xba, 0xca or 0xda.
+ */
+
+static struct nand_flash_dev nand_flash_ids[] = {
+ /* NAND flash */
+ { 0x6e, 20, 8, 4, 8, 2}, /* 1 MB */
+ { 0xe8, 20, 8, 4, 8, 2}, /* 1 MB */
+ { 0xec, 20, 8, 4, 8, 2}, /* 1 MB */
+ { 0x64, 21, 8, 4, 9, 2}, /* 2 MB */
+ { 0xea, 21, 8, 4, 9, 2}, /* 2 MB */
+ { 0x6b, 22, 9, 4, 9, 2}, /* 4 MB */
+ { 0xe3, 22, 9, 4, 9, 2}, /* 4 MB */
+ { 0xe5, 22, 9, 4, 9, 2}, /* 4 MB */
+ { 0xe6, 23, 9, 4, 10, 2}, /* 8 MB */
+ { 0x73, 24, 9, 5, 10, 2}, /* 16 MB */
+ { 0x75, 25, 9, 5, 10, 2}, /* 32 MB */
+ { 0x76, 26, 9, 5, 10, 3}, /* 64 MB */
+ { 0x79, 27, 9, 5, 10, 3}, /* 128 MB */
+
+ /* MASK ROM */
+ { 0x5d, 21, 9, 4, 8, 2}, /* 2 MB */
+ { 0xd5, 22, 9, 4, 9, 2}, /* 4 MB */
+ { 0xd6, 23, 9, 4, 10, 2}, /* 8 MB */
+ { 0x57, 24, 9, 4, 11, 2}, /* 16 MB */
+ { 0x58, 25, 9, 4, 12, 2}, /* 32 MB */
+ { 0,}
+};
+
+static struct nand_flash_dev *
+nand_find_id(unsigned char id) {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(nand_flash_ids); i++)
+ if (nand_flash_ids[i].model_id == id)
+ return &(nand_flash_ids[i]);
+ return NULL;
+}
+
+/*
+ * ECC computation.
+ */
+static unsigned char parity[256];
+static unsigned char ecc2[256];
+
+static void nand_init_ecc(void) {
+ int i, j, a;
+
+ parity[0] = 0;
+ for (i = 1; i < 256; i++)
+ parity[i] = (parity[i&(i-1)] ^ 1);
+
+ for (i = 0; i < 256; i++) {
+ a = 0;
+ for (j = 0; j < 8; j++) {
+ if (i & (1<<j)) {
+ if ((j & 1) == 0)
+ a ^= 0x04;
+ if ((j & 2) == 0)
+ a ^= 0x10;
+ if ((j & 4) == 0)
+ a ^= 0x40;
+ }
+ }
+ ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
+ }
+}
+
+/* compute 3-byte ecc on 256 bytes */
+static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
+ int i, j, a;
+ unsigned char par = 0, bit, bits[8] = {0};
+
+ /* collect 16 checksum bits */
+ for (i = 0; i < 256; i++) {
+ par ^= data[i];
+ bit = parity[data[i]];
+ for (j = 0; j < 8; j++)
+ if ((i & (1<<j)) == 0)
+ bits[j] ^= bit;
+ }
+
+ /* put 4+4+4 = 12 bits in the ecc */
+ a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
+ ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+ a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
+ ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+ ecc[2] = ecc2[par];
+}
+
+static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) {
+ return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
+}
+
+static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
+ memcpy(data, ecc, 3);
+}
+
+/*
+ * The actual driver starts here.
+ */
+
+struct sddr09_card_info {
+ unsigned long capacity; /* Size of card in bytes */
+ int pagesize; /* Size of page in bytes */
+ int pageshift; /* log2 of pagesize */
+ int blocksize; /* Size of block in pages */
+ int blockshift; /* log2 of blocksize */
+ int blockmask; /* 2^blockshift - 1 */
+ int *lba_to_pba; /* logical to physical map */
+ int *pba_to_lba; /* physical to logical map */
+ int lbact; /* number of available pages */
+ int flags;
+#define SDDR09_WP 1 /* write protected */
+};
+
+/*
+ * On my 16MB card, control blocks have size 64 (16 real control bytes,
+ * and 48 junk bytes). In reality of course the card uses 16 control bytes,
+ * so the reader makes up the remaining 48. Don't know whether these numbers
+ * depend on the card. For now a constant.
+ */
+#define CONTROL_SHIFT 6
+
+/*
+ * On my Combo CF/SM reader, the SM reader has LUN 1.
+ * (and things fail with LUN 0).
+ * It seems LUN is irrelevant for others.
+ */
+#define LUN 1
+#define LUNBITS (LUN << 5)
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF 0xffffffff
+#define SPARE 0xfffffffe
+#define UNUSABLE 0xfffffffd
+
+static const int erase_bad_lba_entries = 0;
+
+/* send vendor interface command (0x41) */
+/* called for requests 0, 1, 8 */
+static int
+sddr09_send_command(struct us_data *us,
+ unsigned char request,
+ unsigned char direction,
+ unsigned char *xfer_data,
+ unsigned int xfer_len) {
+ unsigned int pipe;
+ unsigned char requesttype = (0x41 | direction);
+ int rc;
+
+ // Get the receive or send control pipe number
+
+ if (direction == USB_DIR_IN)
+ pipe = us->recv_ctrl_pipe;
+ else
+ pipe = us->send_ctrl_pipe;
+
+ rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype,
+ 0, 0, xfer_data, xfer_len);
+ switch (rc) {
+ case USB_STOR_XFER_GOOD: return 0;
+ case USB_STOR_XFER_STALLED: return -EPIPE;
+ default: return -EIO;
+ }
+}
+
+static int
+sddr09_send_scsi_command(struct us_data *us,
+ unsigned char *command,
+ unsigned int command_len) {
+ return sddr09_send_command(us, 0, USB_DIR_OUT, command, command_len);
+}
+
+#if 0
+/*
+ * Test Unit Ready Command: 12 bytes.
+ * byte 0: opcode: 00
+ */
+static int
+sddr09_test_unit_ready(struct us_data *us) {
+ unsigned char *command = us->iobuf;
+ int result;
+
+ memset(command, 0, 6);
+ command[1] = LUNBITS;
+
+ result = sddr09_send_scsi_command(us, command, 6);
+
+ usb_stor_dbg(us, "sddr09_test_unit_ready returns %d\n", result);
+
+ return result;
+}
+#endif
+
+/*
+ * Request Sense Command: 12 bytes.
+ * byte 0: opcode: 03
+ * byte 4: data length
+ */
+static int
+sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) {
+ unsigned char *command = us->iobuf;
+ int result;
+
+ memset(command, 0, 12);
+ command[0] = 0x03;
+ command[1] = LUNBITS;
+ command[4] = buflen;
+
+ result = sddr09_send_scsi_command(us, command, 12);
+ if (result)
+ return result;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ sensebuf, buflen, NULL);
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
+}
+
+/*
+ * Read Command: 12 bytes.
+ * byte 0: opcode: E8
+ * byte 1: last two bits: 00: read data, 01: read blockwise control,
+ * 10: read both, 11: read pagewise control.
+ * It turns out we need values 20, 21, 22, 23 here (LUN 1).
+ * bytes 2-5: address (interpretation depends on byte 1, see below)
+ * bytes 10-11: count (idem)
+ *
+ * A page has 512 data bytes and 64 control bytes (16 control and 48 junk).
+ * A read data command gets data in 512-byte pages.
+ * A read control command gets control in 64-byte chunks.
+ * A read both command gets data+control in 576-byte chunks.
+ *
+ * Blocks are groups of 32 pages, and read blockwise control jumps to the
+ * next block, while read pagewise control jumps to the next page after
+ * reading a group of 64 control bytes.
+ * [Here 512 = 1<<pageshift, 32 = 1<<blockshift, 64 is constant?]
+ *
+ * (1 MB and 2 MB cards are a bit different, but I have only a 16 MB card.)
+ */
+
+static int
+sddr09_readX(struct us_data *us, int x, unsigned long fromaddress,
+ int nr_of_pages, int bulklen, unsigned char *buf,
+ int use_sg) {
+
+ unsigned char *command = us->iobuf;
+ int result;
+
+ command[0] = 0xE8;
+ command[1] = LUNBITS | x;
+ command[2] = MSB_of(fromaddress>>16);
+ command[3] = LSB_of(fromaddress>>16);
+ command[4] = MSB_of(fromaddress & 0xFFFF);
+ command[5] = LSB_of(fromaddress & 0xFFFF);
+ command[6] = 0;
+ command[7] = 0;
+ command[8] = 0;
+ command[9] = 0;
+ command[10] = MSB_of(nr_of_pages);
+ command[11] = LSB_of(nr_of_pages);
+
+ result = sddr09_send_scsi_command(us, command, 12);
+
+ if (result) {
+ usb_stor_dbg(us, "Result for send_control in sddr09_read2%d %d\n",
+ x, result);
+ return result;
+ }
+
+ result = usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe,
+ buf, bulklen, use_sg, NULL);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read2%d %d\n",
+ x, result);
+ return -EIO;
+ }
+ return 0;
+}
+
+/*
+ * Read Data
+ *
+ * fromaddress counts data shorts:
+ * increasing it by 256 shifts the bytestream by 512 bytes;
+ * the last 8 bits are ignored.
+ *
+ * nr_of_pages counts pages of size (1 << pageshift).
+ */
+static int
+sddr09_read20(struct us_data *us, unsigned long fromaddress,
+ int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) {
+ int bulklen = nr_of_pages << pageshift;
+
+ /* The last 8 bits of fromaddress are ignored. */
+ return sddr09_readX(us, 0, fromaddress, nr_of_pages, bulklen,
+ buf, use_sg);
+}
+
+/*
+ * Read Blockwise Control
+ *
+ * fromaddress gives the starting position (as in read data;
+ * the last 8 bits are ignored); increasing it by 32*256 shifts
+ * the output stream by 64 bytes.
+ *
+ * count counts control groups of size (1 << controlshift).
+ * For me, controlshift = 6. Is this constant?
+ *
+ * After getting one control group, jump to the next block
+ * (fromaddress += 8192).
+ */
+static int
+sddr09_read21(struct us_data *us, unsigned long fromaddress,
+ int count, int controlshift, unsigned char *buf, int use_sg) {
+
+ int bulklen = (count << controlshift);
+ return sddr09_readX(us, 1, fromaddress, count, bulklen,
+ buf, use_sg);
+}
+
+/*
+ * Read both Data and Control
+ *
+ * fromaddress counts data shorts, ignoring control:
+ * increasing it by 256 shifts the bytestream by 576 = 512+64 bytes;
+ * the last 8 bits are ignored.
+ *
+ * nr_of_pages counts pages of size (1 << pageshift) + (1 << controlshift).
+ */
+static int
+sddr09_read22(struct us_data *us, unsigned long fromaddress,
+ int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) {
+
+ int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT);
+ usb_stor_dbg(us, "reading %d pages, %d bytes\n", nr_of_pages, bulklen);
+ return sddr09_readX(us, 2, fromaddress, nr_of_pages, bulklen,
+ buf, use_sg);
+}
+
+#if 0
+/*
+ * Read Pagewise Control
+ *
+ * fromaddress gives the starting position (as in read data;
+ * the last 8 bits are ignored); increasing it by 256 shifts
+ * the output stream by 64 bytes.
+ *
+ * count counts control groups of size (1 << controlshift).
+ * For me, controlshift = 6. Is this constant?
+ *
+ * After getting one control group, jump to the next page
+ * (fromaddress += 256).
+ */
+static int
+sddr09_read23(struct us_data *us, unsigned long fromaddress,
+ int count, int controlshift, unsigned char *buf, int use_sg) {
+
+ int bulklen = (count << controlshift);
+ return sddr09_readX(us, 3, fromaddress, count, bulklen,
+ buf, use_sg);
+}
+#endif
+
+/*
+ * Erase Command: 12 bytes.
+ * byte 0: opcode: EA
+ * bytes 6-9: erase address (big-endian, counting shorts, sector aligned).
+ *
+ * Always precisely one block is erased; bytes 2-5 and 10-11 are ignored.
+ * The byte address being erased is 2*Eaddress.
+ * The CIS cannot be erased.
+ */
+static int
+sddr09_erase(struct us_data *us, unsigned long Eaddress) {
+ unsigned char *command = us->iobuf;
+ int result;
+
+ usb_stor_dbg(us, "erase address %lu\n", Eaddress);
+
+ memset(command, 0, 12);
+ command[0] = 0xEA;
+ command[1] = LUNBITS;
+ command[6] = MSB_of(Eaddress>>16);
+ command[7] = LSB_of(Eaddress>>16);
+ command[8] = MSB_of(Eaddress & 0xFFFF);
+ command[9] = LSB_of(Eaddress & 0xFFFF);
+
+ result = sddr09_send_scsi_command(us, command, 12);
+
+ if (result)
+ usb_stor_dbg(us, "Result for send_control in sddr09_erase %d\n",
+ result);
+
+ return result;
+}
+
+/*
+ * Write CIS Command: 12 bytes.
+ * byte 0: opcode: EE
+ * bytes 2-5: write address in shorts
+ * bytes 10-11: sector count
+ *
+ * This writes at the indicated address. Don't know how it differs
+ * from E9. Maybe it does not erase? However, it will also write to
+ * the CIS.
+ *
+ * When two such commands on the same page follow each other directly,
+ * the second one is not done.
+ */
+
+/*
+ * Write Command: 12 bytes.
+ * byte 0: opcode: E9
+ * bytes 2-5: write address (big-endian, counting shorts, sector aligned).
+ * bytes 6-9: erase address (big-endian, counting shorts, sector aligned).
+ * bytes 10-11: sector count (big-endian, in 512-byte sectors).
+ *
+ * If write address equals erase address, the erase is done first,
+ * otherwise the write is done first. When erase address equals zero
+ * no erase is done?
+ */
+static int
+sddr09_writeX(struct us_data *us,
+ unsigned long Waddress, unsigned long Eaddress,
+ int nr_of_pages, int bulklen, unsigned char *buf, int use_sg) {
+
+ unsigned char *command = us->iobuf;
+ int result;
+
+ command[0] = 0xE9;
+ command[1] = LUNBITS;
+
+ command[2] = MSB_of(Waddress>>16);
+ command[3] = LSB_of(Waddress>>16);
+ command[4] = MSB_of(Waddress & 0xFFFF);
+ command[5] = LSB_of(Waddress & 0xFFFF);
+
+ command[6] = MSB_of(Eaddress>>16);
+ command[7] = LSB_of(Eaddress>>16);
+ command[8] = MSB_of(Eaddress & 0xFFFF);
+ command[9] = LSB_of(Eaddress & 0xFFFF);
+
+ command[10] = MSB_of(nr_of_pages);
+ command[11] = LSB_of(nr_of_pages);
+
+ result = sddr09_send_scsi_command(us, command, 12);
+
+ if (result) {
+ usb_stor_dbg(us, "Result for send_control in sddr09_writeX %d\n",
+ result);
+ return result;
+ }
+
+ result = usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe,
+ buf, bulklen, use_sg, NULL);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Result for bulk_transfer in sddr09_writeX %d\n",
+ result);
+ return -EIO;
+ }
+ return 0;
+}
+
+/* erase address, write same address */
+static int
+sddr09_write_inplace(struct us_data *us, unsigned long address,
+ int nr_of_pages, int pageshift, unsigned char *buf,
+ int use_sg) {
+ int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT);
+ return sddr09_writeX(us, address, address, nr_of_pages, bulklen,
+ buf, use_sg);
+}
+
+#if 0
+/*
+ * Read Scatter Gather Command: 3+4n bytes.
+ * byte 0: opcode E7
+ * byte 2: n
+ * bytes 4i-1,4i,4i+1: page address
+ * byte 4i+2: page count
+ * (i=1..n)
+ *
+ * This reads several pages from the card to a single memory buffer.
+ * The last two bits of byte 1 have the same meaning as for E8.
+ */
+static int
+sddr09_read_sg_test_only(struct us_data *us) {
+ unsigned char *command = us->iobuf;
+ int result, bulklen, nsg, ct;
+ unsigned char *buf;
+ unsigned long address;
+
+ nsg = bulklen = 0;
+ command[0] = 0xE7;
+ command[1] = LUNBITS;
+ command[2] = 0;
+ address = 040000; ct = 1;
+ nsg++;
+ bulklen += (ct << 9);
+ command[4*nsg+2] = ct;
+ command[4*nsg+1] = ((address >> 9) & 0xFF);
+ command[4*nsg+0] = ((address >> 17) & 0xFF);
+ command[4*nsg-1] = ((address >> 25) & 0xFF);
+
+ address = 0340000; ct = 1;
+ nsg++;
+ bulklen += (ct << 9);
+ command[4*nsg+2] = ct;
+ command[4*nsg+1] = ((address >> 9) & 0xFF);
+ command[4*nsg+0] = ((address >> 17) & 0xFF);
+ command[4*nsg-1] = ((address >> 25) & 0xFF);
+
+ address = 01000000; ct = 2;
+ nsg++;
+ bulklen += (ct << 9);
+ command[4*nsg+2] = ct;
+ command[4*nsg+1] = ((address >> 9) & 0xFF);
+ command[4*nsg+0] = ((address >> 17) & 0xFF);
+ command[4*nsg-1] = ((address >> 25) & 0xFF);
+
+ command[2] = nsg;
+
+ result = sddr09_send_scsi_command(us, command, 4*nsg+3);
+
+ if (result) {
+ usb_stor_dbg(us, "Result for send_control in sddr09_read_sg %d\n",
+ result);
+ return result;
+ }
+
+ buf = kmalloc(bulklen, GFP_NOIO);
+ if (!buf)
+ return -ENOMEM;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ buf, bulklen, NULL);
+ kfree(buf);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read_sg %d\n",
+ result);
+ return -EIO;
+ }
+
+ return 0;
+}
+#endif
+
+/*
+ * Read Status Command: 12 bytes.
+ * byte 0: opcode: EC
+ *
+ * Returns 64 bytes, all zero except for the first.
+ * bit 0: 1: Error
+ * bit 5: 1: Suspended
+ * bit 6: 1: Ready
+ * bit 7: 1: Not write-protected
+ */
+
+static int
+sddr09_read_status(struct us_data *us, unsigned char *status) {
+
+ unsigned char *command = us->iobuf;
+ unsigned char *data = us->iobuf;
+ int result;
+
+ usb_stor_dbg(us, "Reading status...\n");
+
+ memset(command, 0, 12);
+ command[0] = 0xEC;
+ command[1] = LUNBITS;
+
+ result = sddr09_send_scsi_command(us, command, 12);
+ if (result)
+ return result;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, 64, NULL);
+ *status = data[0];
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
+}
+
+static int
+sddr09_read_data(struct us_data *us,
+ unsigned long address,
+ unsigned int sectors) {
+
+ struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
+ unsigned char *buffer;
+ unsigned int lba, maxlba, pba;
+ unsigned int page, pages;
+ unsigned int len, offset;
+ struct scatterlist *sg;
+ int result;
+
+ // Figure out the initial LBA and page
+ lba = address >> info->blockshift;
+ page = (address & info->blockmask);
+ maxlba = info->capacity >> (info->pageshift + info->blockshift);
+ if (lba >= maxlba)
+ return -EIO;
+
+ // Since we only read in one block at a time, we have to create
+ // a bounce buffer and move the data a piece at a time between the
+ // bounce buffer and the actual transfer buffer.
+
+ len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) {
+ printk(KERN_WARNING "sddr09_read_data: Out of memory\n");
+ return -ENOMEM;
+ }
+
+ // This could be made much more efficient by checking for
+ // contiguous LBA's. Another exercise left to the student.
+
+ result = 0;
+ offset = 0;
+ sg = NULL;
+
+ while (sectors > 0) {
+
+ /* Find number of pages we can read in this block */
+ pages = min(sectors, info->blocksize - page);
+ len = pages << info->pageshift;
+
+ /* Not overflowing capacity? */
+ if (lba >= maxlba) {
+ usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
+ lba, maxlba);
+ result = -EIO;
+ break;
+ }
+
+ /* Find where this lba lives on disk */
+ pba = info->lba_to_pba[lba];
+
+ if (pba == UNDEF) { /* this lba was never written */
+
+ usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
+ pages, lba, page);
+
+ /* This is not really an error. It just means
+ that the block has never been written.
+ Instead of returning an error
+ it is better to return all zero data. */
+
+ memset(buffer, 0, len);
+
+ } else {
+ usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n",
+ pages, pba, lba, page);
+
+ address = ((pba << info->blockshift) + page) <<
+ info->pageshift;
+
+ result = sddr09_read20(us, address>>1,
+ pages, info->pageshift, buffer, 0);
+ if (result)
+ break;
+ }
+
+ // Store the data in the transfer buffer
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &offset, TO_XFER_BUF);
+
+ page = 0;
+ lba++;
+ sectors -= pages;
+ }
+
+ kfree(buffer);
+ return result;
+}
+
+static unsigned int
+sddr09_find_unused_pba(struct sddr09_card_info *info, unsigned int lba) {
+ static unsigned int lastpba = 1;
+ int zonestart, end, i;
+
+ zonestart = (lba/1000) << 10;
+ end = info->capacity >> (info->blockshift + info->pageshift);
+ end -= zonestart;
+ if (end > 1024)
+ end = 1024;
+
+ for (i = lastpba+1; i < end; i++) {
+ if (info->pba_to_lba[zonestart+i] == UNDEF) {
+ lastpba = i;
+ return zonestart+i;
+ }
+ }
+ for (i = 0; i <= lastpba; i++) {
+ if (info->pba_to_lba[zonestart+i] == UNDEF) {
+ lastpba = i;
+ return zonestart+i;
+ }
+ }
+ return 0;
+}
+
+static int
+sddr09_write_lba(struct us_data *us, unsigned int lba,
+ unsigned int page, unsigned int pages,
+ unsigned char *ptr, unsigned char *blockbuffer) {
+
+ struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
+ unsigned long address;
+ unsigned int pba, lbap;
+ unsigned int pagelen;
+ unsigned char *bptr, *cptr, *xptr;
+ unsigned char ecc[3];
+ int i, result, isnew;
+
+ lbap = ((lba % 1000) << 1) | 0x1000;
+ if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
+ lbap ^= 1;
+ pba = info->lba_to_pba[lba];
+ isnew = 0;
+
+ if (pba == UNDEF) {
+ pba = sddr09_find_unused_pba(info, lba);
+ if (!pba) {
+ printk(KERN_WARNING
+ "sddr09_write_lba: Out of unused blocks\n");
+ return -ENOSPC;
+ }
+ info->pba_to_lba[pba] = lba;
+ info->lba_to_pba[lba] = pba;
+ isnew = 1;
+ }
+
+ if (pba == 1) {
+ /* Maybe it is impossible to write to PBA 1.
+ Fake success, but don't do anything. */
+ printk(KERN_WARNING "sddr09: avoid writing to pba 1\n");
+ return 0;
+ }
+
+ pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
+
+ /* read old contents */
+ address = (pba << (info->pageshift + info->blockshift));
+ result = sddr09_read22(us, address>>1, info->blocksize,
+ info->pageshift, blockbuffer, 0);
+ if (result)
+ return result;
+
+ /* check old contents and fill lba */
+ for (i = 0; i < info->blocksize; i++) {
+ bptr = blockbuffer + i*pagelen;
+ cptr = bptr + info->pagesize;
+ nand_compute_ecc(bptr, ecc);
+ if (!nand_compare_ecc(cptr+13, ecc)) {
+ usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n",
+ i, pba);
+ nand_store_ecc(cptr+13, ecc);
+ }
+ nand_compute_ecc(bptr+(info->pagesize / 2), ecc);
+ if (!nand_compare_ecc(cptr+8, ecc)) {
+ usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n",
+ i, pba);
+ nand_store_ecc(cptr+8, ecc);
+ }
+ cptr[6] = cptr[11] = MSB_of(lbap);
+ cptr[7] = cptr[12] = LSB_of(lbap);
+ }
+
+ /* copy in new stuff and compute ECC */
+ xptr = ptr;
+ for (i = page; i < page+pages; i++) {
+ bptr = blockbuffer + i*pagelen;
+ cptr = bptr + info->pagesize;
+ memcpy(bptr, xptr, info->pagesize);
+ xptr += info->pagesize;
+ nand_compute_ecc(bptr, ecc);
+ nand_store_ecc(cptr+13, ecc);
+ nand_compute_ecc(bptr+(info->pagesize / 2), ecc);
+ nand_store_ecc(cptr+8, ecc);
+ }
+
+ usb_stor_dbg(us, "Rewrite PBA %d (LBA %d)\n", pba, lba);
+
+ result = sddr09_write_inplace(us, address>>1, info->blocksize,
+ info->pageshift, blockbuffer, 0);
+
+ usb_stor_dbg(us, "sddr09_write_inplace returns %d\n", result);
+
+#if 0
+ {
+ unsigned char status = 0;
+ int result2 = sddr09_read_status(us, &status);
+ if (result2)
+ usb_stor_dbg(us, "cannot read status\n");
+ else if (status != 0xc0)
+ usb_stor_dbg(us, "status after write: 0x%x\n", status);
+ }
+#endif
+
+#if 0
+ {
+ int result2 = sddr09_test_unit_ready(us);
+ }
+#endif
+
+ return result;
+}
+
+static int
+sddr09_write_data(struct us_data *us,
+ unsigned long address,
+ unsigned int sectors) {
+
+ struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
+ unsigned int lba, maxlba, page, pages;
+ unsigned int pagelen, blocklen;
+ unsigned char *blockbuffer;
+ unsigned char *buffer;
+ unsigned int len, offset;
+ struct scatterlist *sg;
+ int result;
+
+ // Figure out the initial LBA and page
+ lba = address >> info->blockshift;
+ page = (address & info->blockmask);
+ maxlba = info->capacity >> (info->pageshift + info->blockshift);
+ if (lba >= maxlba)
+ return -EIO;
+
+ // blockbuffer is used for reading in the old data, overwriting
+ // with the new data, and performing ECC calculations
+
+ /* TODO: instead of doing kmalloc/kfree for each write,
+ add a bufferpointer to the info structure */
+
+ pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
+ blocklen = (pagelen << info->blockshift);
+ blockbuffer = kmalloc(blocklen, GFP_NOIO);
+ if (!blockbuffer) {
+ printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
+ return -ENOMEM;
+ }
+
+ // Since we don't write the user data directly to the device,
+ // we have to create a bounce buffer and move the data a piece
+ // at a time between the bounce buffer and the actual transfer buffer.
+
+ len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) {
+ printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
+ kfree(blockbuffer);
+ return -ENOMEM;
+ }
+
+ result = 0;
+ offset = 0;
+ sg = NULL;
+
+ while (sectors > 0) {
+
+ // Write as many sectors as possible in this block
+
+ pages = min(sectors, info->blocksize - page);
+ len = (pages << info->pageshift);
+
+ /* Not overflowing capacity? */
+ if (lba >= maxlba) {
+ usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
+ lba, maxlba);
+ result = -EIO;
+ break;
+ }
+
+ // Get the data from the transfer buffer
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &offset, FROM_XFER_BUF);
+
+ result = sddr09_write_lba(us, lba, page, pages,
+ buffer, blockbuffer);
+ if (result)
+ break;
+
+ page = 0;
+ lba++;
+ sectors -= pages;
+ }
+
+ kfree(buffer);
+ kfree(blockbuffer);
+
+ return result;
+}
+
+static int
+sddr09_read_control(struct us_data *us,
+ unsigned long address,
+ unsigned int blocks,
+ unsigned char *content,
+ int use_sg) {
+
+ usb_stor_dbg(us, "Read control address %lu, blocks %d\n",
+ address, blocks);
+
+ return sddr09_read21(us, address, blocks,
+ CONTROL_SHIFT, content, use_sg);
+}
+
+/*
+ * Read Device ID Command: 12 bytes.
+ * byte 0: opcode: ED
+ *
+ * Returns 2 bytes: Manufacturer ID and Device ID.
+ * On more recent cards 3 bytes: the third byte is an option code A5
+ * signifying that the secret command to read an 128-bit ID is available.
+ * On still more recent cards 4 bytes: the fourth byte C0 means that
+ * a second read ID cmd is available.
+ */
+static int
+sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) {
+ unsigned char *command = us->iobuf;
+ unsigned char *content = us->iobuf;
+ int result, i;
+
+ memset(command, 0, 12);
+ command[0] = 0xED;
+ command[1] = LUNBITS;
+
+ result = sddr09_send_scsi_command(us, command, 12);
+ if (result)
+ return result;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ content, 64, NULL);
+
+ for (i = 0; i < 4; i++)
+ deviceID[i] = content[i];
+
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
+}
+
+static int
+sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) {
+ int result;
+ unsigned char status;
+
+ result = sddr09_read_status(us, &status);
+ if (result) {
+ usb_stor_dbg(us, "read_status fails\n");
+ return result;
+ }
+ usb_stor_dbg(us, "status 0x%02X", status);
+ if ((status & 0x80) == 0) {
+ info->flags |= SDDR09_WP; /* write protected */
+ US_DEBUGPX(" WP");
+ }
+ if (status & 0x40)
+ US_DEBUGPX(" Ready");
+ if (status & LUNBITS)
+ US_DEBUGPX(" Suspended");
+ if (status & 0x1)
+ US_DEBUGPX(" Error");
+ US_DEBUGPX("\n");
+ return 0;
+}
+
+#if 0
+/*
+ * Reset Command: 12 bytes.
+ * byte 0: opcode: EB
+ */
+static int
+sddr09_reset(struct us_data *us) {
+
+ unsigned char *command = us->iobuf;
+
+ memset(command, 0, 12);
+ command[0] = 0xEB;
+ command[1] = LUNBITS;
+
+ return sddr09_send_scsi_command(us, command, 12);
+}
+#endif
+
+static struct nand_flash_dev *
+sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
+ struct nand_flash_dev *cardinfo;
+ unsigned char deviceID[4];
+ char blurbtxt[256];
+ int result;
+
+ usb_stor_dbg(us, "Reading capacity...\n");
+
+ result = sddr09_read_deviceID(us, deviceID);
+
+ if (result) {
+ usb_stor_dbg(us, "Result of read_deviceID is %d\n", result);
+ printk(KERN_WARNING "sddr09: could not read card info\n");
+ return NULL;
+ }
+
+ sprintf(blurbtxt, "sddr09: Found Flash card, ID = %4ph", deviceID);
+
+ /* Byte 0 is the manufacturer */
+ sprintf(blurbtxt + strlen(blurbtxt),
+ ": Manuf. %s",
+ nand_flash_manufacturer(deviceID[0]));
+
+ /* Byte 1 is the device type */
+ cardinfo = nand_find_id(deviceID[1]);
+ if (cardinfo) {
+ /* MB or MiB? It is neither. A 16 MB card has
+ 17301504 raw bytes, of which 16384000 are
+ usable for user data. */
+ sprintf(blurbtxt + strlen(blurbtxt),
+ ", %d MB", 1<<(cardinfo->chipshift - 20));
+ } else {
+ sprintf(blurbtxt + strlen(blurbtxt),
+ ", type unrecognized");
+ }
+
+ /* Byte 2 is code to signal availability of 128-bit ID */
+ if (deviceID[2] == 0xa5) {
+ sprintf(blurbtxt + strlen(blurbtxt),
+ ", 128-bit ID");
+ }
+
+ /* Byte 3 announces the availability of another read ID command */
+ if (deviceID[3] == 0xc0) {
+ sprintf(blurbtxt + strlen(blurbtxt),
+ ", extra cmd");
+ }
+
+ if (flags & SDDR09_WP)
+ sprintf(blurbtxt + strlen(blurbtxt),
+ ", WP");
+
+ printk(KERN_WARNING "%s\n", blurbtxt);
+
+ return cardinfo;
+}
+
+static int
+sddr09_read_map(struct us_data *us) {
+
+ struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
+ int numblocks, alloc_len, alloc_blocks;
+ int i, j, result;
+ unsigned char *buffer, *buffer_end, *ptr;
+ unsigned int lba, lbact;
+
+ if (!info->capacity)
+ return -1;
+
+ // size of a block is 1 << (blockshift + pageshift) bytes
+ // divide into the total capacity to get the number of blocks
+
+ numblocks = info->capacity >> (info->blockshift + info->pageshift);
+
+ // read 64 bytes for every block (actually 1 << CONTROL_SHIFT)
+ // but only use a 64 KB buffer
+ // buffer size used must be a multiple of (1 << CONTROL_SHIFT)
+#define SDDR09_READ_MAP_BUFSZ 65536
+
+ alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT);
+ alloc_len = (alloc_blocks << CONTROL_SHIFT);
+ buffer = kmalloc(alloc_len, GFP_NOIO);
+ if (buffer == NULL) {
+ printk(KERN_WARNING "sddr09_read_map: out of memory\n");
+ result = -1;
+ goto done;
+ }
+ buffer_end = buffer + alloc_len;
+
+#undef SDDR09_READ_MAP_BUFSZ
+
+ kfree(info->lba_to_pba);
+ kfree(info->pba_to_lba);
+ info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
+ info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
+
+ if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
+ printk(KERN_WARNING "sddr09_read_map: out of memory\n");
+ result = -1;
+ goto done;
+ }
+
+ for (i = 0; i < numblocks; i++)
+ info->lba_to_pba[i] = info->pba_to_lba[i] = UNDEF;
+
+ /*
+ * Define lba-pba translation table
+ */
+
+ ptr = buffer_end;
+ for (i = 0; i < numblocks; i++) {
+ ptr += (1 << CONTROL_SHIFT);
+ if (ptr >= buffer_end) {
+ unsigned long address;
+
+ address = i << (info->pageshift + info->blockshift);
+ result = sddr09_read_control(
+ us, address>>1,
+ min(alloc_blocks, numblocks - i),
+ buffer, 0);
+ if (result) {
+ result = -1;
+ goto done;
+ }
+ ptr = buffer;
+ }
+
+ if (i == 0 || i == 1) {
+ info->pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ /* special PBAs have control field 0^16 */
+ for (j = 0; j < 16; j++)
+ if (ptr[j] != 0)
+ goto nonz;
+ info->pba_to_lba[i] = UNUSABLE;
+ printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n",
+ i);
+ continue;
+
+ nonz:
+ /* unwritten PBAs have control field FF^16 */
+ for (j = 0; j < 16; j++)
+ if (ptr[j] != 0xff)
+ goto nonff;
+ continue;
+
+ nonff:
+ /* normal PBAs start with six FFs */
+ if (j < 6) {
+ printk(KERN_WARNING
+ "sddr09: PBA %d has no logical mapping: "
+ "reserved area = %02X%02X%02X%02X "
+ "data status %02X block status %02X\n",
+ i, ptr[0], ptr[1], ptr[2], ptr[3],
+ ptr[4], ptr[5]);
+ info->pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ if ((ptr[6] >> 4) != 0x01) {
+ printk(KERN_WARNING
+ "sddr09: PBA %d has invalid address field "
+ "%02X%02X/%02X%02X\n",
+ i, ptr[6], ptr[7], ptr[11], ptr[12]);
+ info->pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ /* check even parity */
+ if (parity[ptr[6] ^ ptr[7]]) {
+ printk(KERN_WARNING
+ "sddr09: Bad parity in LBA for block %d"
+ " (%02X %02X)\n", i, ptr[6], ptr[7]);
+ info->pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ lba = short_pack(ptr[7], ptr[6]);
+ lba = (lba & 0x07FF) >> 1;
+
+ /*
+ * Every 1024 physical blocks ("zone"), the LBA numbers
+ * go back to zero, but are within a higher block of LBA's.
+ * Also, there is a maximum of 1000 LBA's per zone.
+ * In other words, in PBA 1024-2047 you will find LBA 0-999
+ * which are really LBA 1000-1999. This allows for 24 bad
+ * or special physical blocks per zone.
+ */
+
+ if (lba >= 1000) {
+ printk(KERN_WARNING
+ "sddr09: Bad low LBA %d for block %d\n",
+ lba, i);
+ goto possibly_erase;
+ }
+
+ lba += 1000*(i/0x400);
+
+ if (info->lba_to_pba[lba] != UNDEF) {
+ printk(KERN_WARNING
+ "sddr09: LBA %d seen for PBA %d and %d\n",
+ lba, info->lba_to_pba[lba], i);
+ goto possibly_erase;
+ }
+
+ info->pba_to_lba[i] = lba;
+ info->lba_to_pba[lba] = i;
+ continue;
+
+ possibly_erase:
+ if (erase_bad_lba_entries) {
+ unsigned long address;
+
+ address = (i << (info->pageshift + info->blockshift));
+ sddr09_erase(us, address>>1);
+ info->pba_to_lba[i] = UNDEF;
+ } else
+ info->pba_to_lba[i] = UNUSABLE;
+ }
+
+ /*
+ * Approximate capacity. This is not entirely correct yet,
+ * since a zone with less than 1000 usable pages leads to
+ * missing LBAs. Especially if it is the last zone, some
+ * LBAs can be past capacity.
+ */
+ lbact = 0;
+ for (i = 0; i < numblocks; i += 1024) {
+ int ct = 0;
+
+ for (j = 0; j < 1024 && i+j < numblocks; j++) {
+ if (info->pba_to_lba[i+j] != UNUSABLE) {
+ if (ct >= 1000)
+ info->pba_to_lba[i+j] = SPARE;
+ else
+ ct++;
+ }
+ }
+ lbact += ct;
+ }
+ info->lbact = lbact;
+ usb_stor_dbg(us, "Found %d LBA's\n", lbact);
+ result = 0;
+
+ done:
+ if (result != 0) {
+ kfree(info->lba_to_pba);
+ kfree(info->pba_to_lba);
+ info->lba_to_pba = NULL;
+ info->pba_to_lba = NULL;
+ }
+ kfree(buffer);
+ return result;
+}
+
+static void
+sddr09_card_info_destructor(void *extra) {
+ struct sddr09_card_info *info = (struct sddr09_card_info *)extra;
+
+ if (!info)
+ return;
+
+ kfree(info->lba_to_pba);
+ kfree(info->pba_to_lba);
+}
+
+static int
+sddr09_common_init(struct us_data *us) {
+ int result;
+
+ /* set the configuration -- STALL is an acceptable response here */
+ if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
+ usb_stor_dbg(us, "active config #%d != 1 ??\n",
+ us->pusb_dev->actconfig->desc.bConfigurationValue);
+ return -EINVAL;
+ }
+
+ result = usb_reset_configuration(us->pusb_dev);
+ usb_stor_dbg(us, "Result of usb_reset_configuration is %d\n", result);
+ if (result == -EPIPE) {
+ usb_stor_dbg(us, "-- stall on control interface\n");
+ } else if (result != 0) {
+ /* it's not a stall, but another error -- time to bail */
+ usb_stor_dbg(us, "-- Unknown error. Rejecting device\n");
+ return -EINVAL;
+ }
+
+ us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
+ if (!us->extra)
+ return -ENOMEM;
+ us->extra_destructor = sddr09_card_info_destructor;
+
+ nand_init_ecc();
+ return 0;
+}
+
+
+/*
+ * This is needed at a very early stage. If this is not listed in the
+ * unusual devices list but called from here then LUN 0 of the combo reader
+ * is not recognized. But I do not know what precisely these calls do.
+ */
+static int
+usb_stor_sddr09_dpcm_init(struct us_data *us) {
+ int result;
+ unsigned char *data = us->iobuf;
+
+ result = sddr09_common_init(us);
+ if (result)
+ return result;
+
+ result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2);
+ if (result) {
+ usb_stor_dbg(us, "send_command fails\n");
+ return result;
+ }
+
+ usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]);
+ // get 07 02
+
+ result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2);
+ if (result) {
+ usb_stor_dbg(us, "2nd send_command fails\n");
+ return result;
+ }
+
+ usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]);
+ // get 07 00
+
+ result = sddr09_request_sense(us, data, 18);
+ if (result == 0 && data[2] != 0) {
+ int j;
+ for (j=0; j<18; j++)
+ printk(" %02X", data[j]);
+ printk("\n");
+ // get 70 00 00 00 00 00 00 * 00 00 00 00 00 00
+ // 70: current command
+ // sense key 0, sense code 0, extd sense code 0
+ // additional transfer length * = sizeof(data) - 7
+ // Or: 70 00 06 00 00 00 00 0b 00 00 00 00 28 00 00 00 00 00
+ // sense key 06, sense code 28: unit attention,
+ // not ready to ready transition
+ }
+
+ // test unit ready
+
+ return 0; /* not result */
+}
+
+/*
+ * Transport for the Microtech DPCM-USB
+ */
+static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int ret;
+
+ usb_stor_dbg(us, "LUN=%d\n", (u8)srb->device->lun);
+
+ switch (srb->device->lun) {
+ case 0:
+
+ /*
+ * LUN 0 corresponds to the CompactFlash card reader.
+ */
+ ret = usb_stor_CB_transport(srb, us);
+ break;
+
+ case 1:
+
+ /*
+ * LUN 1 corresponds to the SmartMedia card reader.
+ */
+
+ /*
+ * Set the LUN to 0 (just in case).
+ */
+ srb->device->lun = 0;
+ ret = sddr09_transport(srb, us);
+ srb->device->lun = 1;
+ break;
+
+ default:
+ usb_stor_dbg(us, "Invalid LUN %d\n", (u8)srb->device->lun);
+ ret = USB_STOR_TRANSPORT_ERROR;
+ break;
+ }
+ return ret;
+}
+
+
+/*
+ * Transport for the Sandisk SDDR-09
+ */
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ static unsigned char sensekey = 0, sensecode = 0;
+ static unsigned char havefakesense = 0;
+ int result, i;
+ unsigned char *ptr = us->iobuf;
+ unsigned long capacity;
+ unsigned int page, pages;
+
+ struct sddr09_card_info *info;
+
+ static unsigned char inquiry_response[8] = {
+ 0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00
+ };
+
+ /* note: no block descriptor support */
+ static unsigned char mode_page_01[19] = {
+ 0x00, 0x0F, 0x00, 0x0, 0x0, 0x0, 0x00,
+ 0x01, 0x0A,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+
+ info = (struct sddr09_card_info *)us->extra;
+
+ if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) {
+ /* for a faked command, we have to follow with a faked sense */
+ memset(ptr, 0, 18);
+ ptr[0] = 0x70;
+ ptr[2] = sensekey;
+ ptr[7] = 11;
+ ptr[12] = sensecode;
+ usb_stor_set_xfer_buf(ptr, 18, srb);
+ sensekey = sensecode = havefakesense = 0;
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ havefakesense = 1;
+
+ /* Dummy up a response for INQUIRY since SDDR09 doesn't
+ respond to INQUIRY commands */
+
+ if (srb->cmnd[0] == INQUIRY) {
+ memcpy(ptr, inquiry_response, 8);
+ fill_inquiry_response(us, ptr, 36);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == READ_CAPACITY) {
+ struct nand_flash_dev *cardinfo;
+
+ sddr09_get_wp(us, info); /* read WP bit */
+
+ cardinfo = sddr09_get_cardinfo(us, info->flags);
+ if (!cardinfo) {
+ /* probably no media */
+ init_error:
+ sensekey = 0x02; /* not ready */
+ sensecode = 0x3a; /* medium not present */
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ info->capacity = (1 << cardinfo->chipshift);
+ info->pageshift = cardinfo->pageshift;
+ info->pagesize = (1 << info->pageshift);
+ info->blockshift = cardinfo->blockshift;
+ info->blocksize = (1 << info->blockshift);
+ info->blockmask = info->blocksize - 1;
+
+ // map initialization, must follow get_cardinfo()
+ if (sddr09_read_map(us)) {
+ /* probably out of memory */
+ goto init_error;
+ }
+
+ // Report capacity
+
+ capacity = (info->lbact << info->blockshift) - 1;
+
+ ((__be32 *) ptr)[0] = cpu_to_be32(capacity);
+
+ // Report page size
+
+ ((__be32 *) ptr)[1] = cpu_to_be32(info->pagesize);
+ usb_stor_set_xfer_buf(ptr, 8, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == MODE_SENSE_10) {
+ int modepage = (srb->cmnd[2] & 0x3F);
+
+ /* They ask for the Read/Write error recovery page,
+ or for all pages. */
+ /* %% We should check DBD %% */
+ if (modepage == 0x01 || modepage == 0x3F) {
+ usb_stor_dbg(us, "Dummy up request for mode page 0x%x\n",
+ modepage);
+
+ memcpy(ptr, mode_page_01, sizeof(mode_page_01));
+ ((__be16*)ptr)[0] = cpu_to_be16(sizeof(mode_page_01) - 2);
+ ptr[3] = (info->flags & SDDR09_WP) ? 0x80 : 0;
+ usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ sensekey = 0x05; /* illegal request */
+ sensecode = 0x24; /* invalid field in CDB */
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL)
+ return USB_STOR_TRANSPORT_GOOD;
+
+ havefakesense = 0;
+
+ if (srb->cmnd[0] == READ_10) {
+
+ page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+ page <<= 16;
+ page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+ pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+ usb_stor_dbg(us, "READ_10: read page %d pagect %d\n",
+ page, pages);
+
+ result = sddr09_read_data(us, page, pages);
+ return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+ USB_STOR_TRANSPORT_ERROR);
+ }
+
+ if (srb->cmnd[0] == WRITE_10) {
+
+ page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+ page <<= 16;
+ page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+ pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+ usb_stor_dbg(us, "WRITE_10: write page %d pagect %d\n",
+ page, pages);
+
+ result = sddr09_write_data(us, page, pages);
+ return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+ USB_STOR_TRANSPORT_ERROR);
+ }
+
+ /* catch-all for all other commands, except
+ * pass TEST_UNIT_READY and REQUEST_SENSE through
+ */
+ if (srb->cmnd[0] != TEST_UNIT_READY &&
+ srb->cmnd[0] != REQUEST_SENSE) {
+ sensekey = 0x05; /* illegal request */
+ sensecode = 0x20; /* invalid command */
+ havefakesense = 1;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ for (; srb->cmd_len<12; srb->cmd_len++)
+ srb->cmnd[srb->cmd_len] = 0;
+
+ srb->cmnd[1] = LUNBITS;
+
+ ptr[0] = 0;
+ for (i=0; i<12; i++)
+ sprintf(ptr+strlen(ptr), "%02X ", srb->cmnd[i]);
+
+ usb_stor_dbg(us, "Send control for command %s\n", ptr);
+
+ result = sddr09_send_scsi_command(us, srb->cmnd, 12);
+ if (result) {
+ usb_stor_dbg(us, "sddr09_send_scsi_command returns %d\n",
+ result);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (scsi_bufflen(srb) == 0)
+ return USB_STOR_TRANSPORT_GOOD;
+
+ if (srb->sc_data_direction == DMA_TO_DEVICE ||
+ srb->sc_data_direction == DMA_FROM_DEVICE) {
+ unsigned int pipe = (srb->sc_data_direction == DMA_TO_DEVICE)
+ ? us->send_bulk_pipe : us->recv_bulk_pipe;
+
+ usb_stor_dbg(us, "%s %d bytes\n",
+ (srb->sc_data_direction == DMA_TO_DEVICE) ?
+ "sending" : "receiving",
+ scsi_bufflen(srb));
+
+ result = usb_stor_bulk_srb(us, pipe, srb);
+
+ return (result == USB_STOR_XFER_GOOD ?
+ USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Initialization routine for the sddr09 subdriver
+ */
+static int
+usb_stor_sddr09_init(struct us_data *us) {
+ return sddr09_common_init(us);
+}
+
+static int sddr09_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - sddr09_usb_ids) + sddr09_unusual_dev_list);
+ if (result)
+ return result;
+
+ if (us->protocol == USB_PR_DPCM_USB) {
+ us->transport_name = "Control/Bulk-EUSB/SDDR09";
+ us->transport = dpcm_transport;
+ us->transport_reset = usb_stor_CB_reset;
+ us->max_lun = 1;
+ } else {
+ us->transport_name = "EUSB/SDDR09";
+ us->transport = sddr09_transport;
+ us->transport_reset = usb_stor_CB_reset;
+ us->max_lun = 0;
+ }
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver sddr09_driver = {
+ .name = "ums-sddr09",
+ .probe = sddr09_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = sddr09_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(sddr09_driver);
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
new file mode 100644
index 000000000..aacedef96
--- /dev/null
+++ b/drivers/usb/storage/sddr55.c
@@ -0,0 +1,1006 @@
+/* Driver for SanDisk SDDR-55 SmartMedia reader
+ *
+ * SDDR55 driver v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ * (c) 2002 Simon Munton
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader");
+MODULE_AUTHOR("Simon Munton");
+MODULE_LICENSE("GPL");
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id sddr55_usb_ids[] = {
+# include "unusual_sddr55.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr55_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev sddr55_unusual_dev_list[] = {
+# include "unusual_sddr55.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+#define PAGESIZE 512
+
+#define set_sense_info(sk, asc, ascq) \
+ do { \
+ info->sense_data[2] = sk; \
+ info->sense_data[12] = asc; \
+ info->sense_data[13] = ascq; \
+ } while (0)
+
+
+struct sddr55_card_info {
+ unsigned long capacity; /* Size of card in bytes */
+ int max_log_blks; /* maximum number of logical blocks */
+ int pageshift; /* log2 of pagesize */
+ int smallpageshift; /* 1 if pagesize == 256 */
+ int blocksize; /* Size of block in pages */
+ int blockshift; /* log2 of blocksize */
+ int blockmask; /* 2^blockshift - 1 */
+ int read_only; /* non zero if card is write protected */
+ int force_read_only; /* non zero if we find a map error*/
+ int *lba_to_pba; /* logical to physical map */
+ int *pba_to_lba; /* physical to logical map */
+ int fatal_error; /* set if we detect something nasty */
+ unsigned long last_access; /* number of jiffies since we last talked to device */
+ unsigned char sense_data[18];
+};
+
+
+#define NOT_ALLOCATED 0xffffffff
+#define BAD_BLOCK 0xffff
+#define CIS_BLOCK 0x400
+#define UNUSED_BLOCK 0x3ff
+
+static int
+sddr55_bulk_transport(struct us_data *us, int direction,
+ unsigned char *data, unsigned int len) {
+ struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+ unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
+ us->recv_bulk_pipe : us->send_bulk_pipe;
+
+ if (!len)
+ return USB_STOR_XFER_GOOD;
+ info->last_access = jiffies;
+ return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL);
+}
+
+/* check if card inserted, if there is, update read_only status
+ * return non zero if no card
+ */
+
+static int sddr55_status(struct us_data *us)
+{
+ int result;
+ unsigned char *command = us->iobuf;
+ unsigned char *status = us->iobuf;
+ struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+
+ /* send command */
+ memset(command, 0, 8);
+ command[5] = 0xB0;
+ command[7] = 0x80;
+ result = sddr55_bulk_transport(us,
+ DMA_TO_DEVICE, command, 8);
+
+ usb_stor_dbg(us, "Result for send_command in status %d\n", result);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ set_sense_info (4, 0, 0); /* hardware error */
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ result = sddr55_bulk_transport(us,
+ DMA_FROM_DEVICE, status, 4);
+
+ /* expect to get short transfer if no card fitted */
+ if (result == USB_STOR_XFER_SHORT || result == USB_STOR_XFER_STALLED) {
+ /* had a short transfer, no card inserted, free map memory */
+ kfree(info->lba_to_pba);
+ kfree(info->pba_to_lba);
+ info->lba_to_pba = NULL;
+ info->pba_to_lba = NULL;
+
+ info->fatal_error = 0;
+ info->force_read_only = 0;
+
+ set_sense_info (2, 0x3a, 0); /* not ready, medium not present */
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ if (result != USB_STOR_XFER_GOOD) {
+ set_sense_info (4, 0, 0); /* hardware error */
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ /* check write protect status */
+ info->read_only = (status[0] & 0x20);
+
+ /* now read status */
+ result = sddr55_bulk_transport(us,
+ DMA_FROM_DEVICE, status, 2);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ set_sense_info (4, 0, 0); /* hardware error */
+ }
+
+ return (result == USB_STOR_XFER_GOOD ?
+ USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_FAILED);
+}
+
+
+static int sddr55_read_data(struct us_data *us,
+ unsigned int lba,
+ unsigned int page,
+ unsigned short sectors) {
+
+ int result = USB_STOR_TRANSPORT_GOOD;
+ unsigned char *command = us->iobuf;
+ unsigned char *status = us->iobuf;
+ struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+ unsigned char *buffer;
+
+ unsigned int pba;
+ unsigned long address;
+
+ unsigned short pages;
+ unsigned int len, offset;
+ struct scatterlist *sg;
+
+ // Since we only read in one block at a time, we have to create
+ // a bounce buffer and move the data a piece at a time between the
+ // bounce buffer and the actual transfer buffer.
+
+ len = min((unsigned int) sectors, (unsigned int) info->blocksize >>
+ info->smallpageshift) * PAGESIZE;
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR; /* out of memory */
+ offset = 0;
+ sg = NULL;
+
+ while (sectors>0) {
+
+ /* have we got to end? */
+ if (lba >= info->max_log_blks)
+ break;
+
+ pba = info->lba_to_pba[lba];
+
+ // Read as many sectors as possible in this block
+
+ pages = min((unsigned int) sectors << info->smallpageshift,
+ info->blocksize - page);
+ len = pages << info->pageshift;
+
+ usb_stor_dbg(us, "Read %02X pages, from PBA %04X (LBA %04X) page %02X\n",
+ pages, pba, lba, page);
+
+ if (pba == NOT_ALLOCATED) {
+ /* no pba for this lba, fill with zeroes */
+ memset (buffer, 0, len);
+ } else {
+
+ address = (pba << info->blockshift) + page;
+
+ command[0] = 0;
+ command[1] = LSB_of(address>>16);
+ command[2] = LSB_of(address>>8);
+ command[3] = LSB_of(address);
+
+ command[4] = 0;
+ command[5] = 0xB0;
+ command[6] = LSB_of(pages << (1 - info->smallpageshift));
+ command[7] = 0x85;
+
+ /* send command */
+ result = sddr55_bulk_transport(us,
+ DMA_TO_DEVICE, command, 8);
+
+ usb_stor_dbg(us, "Result for send_command in read_data %d\n",
+ result);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ /* read data */
+ result = sddr55_bulk_transport(us,
+ DMA_FROM_DEVICE, buffer, len);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ /* now read status */
+ result = sddr55_bulk_transport(us,
+ DMA_FROM_DEVICE, status, 2);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ /* check status for error */
+ if (status[0] == 0xff && status[1] == 0x4) {
+ set_sense_info (3, 0x11, 0);
+ result = USB_STOR_TRANSPORT_FAILED;
+ goto leave;
+ }
+ }
+
+ // Store the data in the transfer buffer
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &offset, TO_XFER_BUF);
+
+ page = 0;
+ lba++;
+ sectors -= pages >> info->smallpageshift;
+ }
+
+ result = USB_STOR_TRANSPORT_GOOD;
+
+leave:
+ kfree(buffer);
+
+ return result;
+}
+
+static int sddr55_write_data(struct us_data *us,
+ unsigned int lba,
+ unsigned int page,
+ unsigned short sectors) {
+
+ int result = USB_STOR_TRANSPORT_GOOD;
+ unsigned char *command = us->iobuf;
+ unsigned char *status = us->iobuf;
+ struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+ unsigned char *buffer;
+
+ unsigned int pba;
+ unsigned int new_pba;
+ unsigned long address;
+
+ unsigned short pages;
+ int i;
+ unsigned int len, offset;
+ struct scatterlist *sg;
+
+ /* check if we are allowed to write */
+ if (info->read_only || info->force_read_only) {
+ set_sense_info (7, 0x27, 0); /* read only */
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ // Since we only write one block at a time, we have to create
+ // a bounce buffer and move the data a piece at a time between the
+ // bounce buffer and the actual transfer buffer.
+
+ len = min((unsigned int) sectors, (unsigned int) info->blocksize >>
+ info->smallpageshift) * PAGESIZE;
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+ offset = 0;
+ sg = NULL;
+
+ while (sectors > 0) {
+
+ /* have we got to end? */
+ if (lba >= info->max_log_blks)
+ break;
+
+ pba = info->lba_to_pba[lba];
+
+ // Write as many sectors as possible in this block
+
+ pages = min((unsigned int) sectors << info->smallpageshift,
+ info->blocksize - page);
+ len = pages << info->pageshift;
+
+ // Get the data from the transfer buffer
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &offset, FROM_XFER_BUF);
+
+ usb_stor_dbg(us, "Write %02X pages, to PBA %04X (LBA %04X) page %02X\n",
+ pages, pba, lba, page);
+
+ command[4] = 0;
+
+ if (pba == NOT_ALLOCATED) {
+ /* no pba allocated for this lba, find a free pba to use */
+
+ int max_pba = (info->max_log_blks / 250 ) * 256;
+ int found_count = 0;
+ int found_pba = -1;
+
+ /* set pba to first block in zone lba is in */
+ pba = (lba / 1000) * 1024;
+
+ usb_stor_dbg(us, "No PBA for LBA %04X\n", lba);
+
+ if (max_pba > 1024)
+ max_pba = 1024;
+
+ /*
+ * Scan through the map looking for an unused block
+ * leave 16 unused blocks at start (or as many as
+ * possible) since the sddr55 seems to reuse a used
+ * block when it shouldn't if we don't leave space.
+ */
+ for (i = 0; i < max_pba; i++, pba++) {
+ if (info->pba_to_lba[pba] == UNUSED_BLOCK) {
+ found_pba = pba;
+ if (found_count++ > 16)
+ break;
+ }
+ }
+
+ pba = found_pba;
+
+ if (pba == -1) {
+ /* oh dear */
+ usb_stor_dbg(us, "Couldn't find unallocated block\n");
+
+ set_sense_info (3, 0x31, 0); /* medium error */
+ result = USB_STOR_TRANSPORT_FAILED;
+ goto leave;
+ }
+
+ usb_stor_dbg(us, "Allocating PBA %04X for LBA %04X\n",
+ pba, lba);
+
+ /* set writing to unallocated block flag */
+ command[4] = 0x40;
+ }
+
+ address = (pba << info->blockshift) + page;
+
+ command[1] = LSB_of(address>>16);
+ command[2] = LSB_of(address>>8);
+ command[3] = LSB_of(address);
+
+ /* set the lba into the command, modulo 1000 */
+ command[0] = LSB_of(lba % 1000);
+ command[6] = MSB_of(lba % 1000);
+
+ command[4] |= LSB_of(pages >> info->smallpageshift);
+ command[5] = 0xB0;
+ command[7] = 0x86;
+
+ /* send command */
+ result = sddr55_bulk_transport(us,
+ DMA_TO_DEVICE, command, 8);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Result for send_command in write_data %d\n",
+ result);
+
+ /* set_sense_info is superfluous here? */
+ set_sense_info (3, 0x3, 0);/* peripheral write error */
+ result = USB_STOR_TRANSPORT_FAILED;
+ goto leave;
+ }
+
+ /* send the data */
+ result = sddr55_bulk_transport(us,
+ DMA_TO_DEVICE, buffer, len);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Result for send_data in write_data %d\n",
+ result);
+
+ /* set_sense_info is superfluous here? */
+ set_sense_info (3, 0x3, 0);/* peripheral write error */
+ result = USB_STOR_TRANSPORT_FAILED;
+ goto leave;
+ }
+
+ /* now read status */
+ result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6);
+
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Result for get_status in write_data %d\n",
+ result);
+
+ /* set_sense_info is superfluous here? */
+ set_sense_info (3, 0x3, 0);/* peripheral write error */
+ result = USB_STOR_TRANSPORT_FAILED;
+ goto leave;
+ }
+
+ new_pba = (status[3] + (status[4] << 8) + (status[5] << 16))
+ >> info->blockshift;
+
+ /* check status for error */
+ if (status[0] == 0xff && status[1] == 0x4) {
+ info->pba_to_lba[new_pba] = BAD_BLOCK;
+
+ set_sense_info (3, 0x0c, 0);
+ result = USB_STOR_TRANSPORT_FAILED;
+ goto leave;
+ }
+
+ usb_stor_dbg(us, "Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n",
+ lba, pba, new_pba);
+
+ /* update the lba<->pba maps, note new_pba might be the same as pba */
+ info->lba_to_pba[lba] = new_pba;
+ info->pba_to_lba[pba] = UNUSED_BLOCK;
+
+ /* check that new_pba wasn't already being used */
+ if (info->pba_to_lba[new_pba] != UNUSED_BLOCK) {
+ printk(KERN_ERR "sddr55 error: new PBA %04X already in use for LBA %04X\n",
+ new_pba, info->pba_to_lba[new_pba]);
+ info->fatal_error = 1;
+ set_sense_info (3, 0x31, 0);
+ result = USB_STOR_TRANSPORT_FAILED;
+ goto leave;
+ }
+
+ /* update the pba<->lba maps for new_pba */
+ info->pba_to_lba[new_pba] = lba % 1000;
+
+ page = 0;
+ lba++;
+ sectors -= pages >> info->smallpageshift;
+ }
+ result = USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+ kfree(buffer);
+ return result;
+}
+
+static int sddr55_read_deviceID(struct us_data *us,
+ unsigned char *manufacturerID,
+ unsigned char *deviceID) {
+
+ int result;
+ unsigned char *command = us->iobuf;
+ unsigned char *content = us->iobuf;
+
+ memset(command, 0, 8);
+ command[5] = 0xB0;
+ command[7] = 0x84;
+ result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8);
+
+ usb_stor_dbg(us, "Result of send_control for device ID is %d\n",
+ result);
+
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ result = sddr55_bulk_transport(us,
+ DMA_FROM_DEVICE, content, 4);
+
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ *manufacturerID = content[0];
+ *deviceID = content[1];
+
+ if (content[0] != 0xff) {
+ result = sddr55_bulk_transport(us,
+ DMA_FROM_DEVICE, content, 2);
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+
+static int sddr55_reset(struct us_data *us)
+{
+ return 0;
+}
+
+
+static unsigned long sddr55_get_capacity(struct us_data *us) {
+
+ unsigned char uninitialized_var(manufacturerID);
+ unsigned char uninitialized_var(deviceID);
+ int result;
+ struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
+
+ usb_stor_dbg(us, "Reading capacity...\n");
+
+ result = sddr55_read_deviceID(us,
+ &manufacturerID,
+ &deviceID);
+
+ usb_stor_dbg(us, "Result of read_deviceID is %d\n", result);
+
+ if (result != USB_STOR_XFER_GOOD)
+ return 0;
+
+ usb_stor_dbg(us, "Device ID = %02X\n", deviceID);
+ usb_stor_dbg(us, "Manuf ID = %02X\n", manufacturerID);
+
+ info->pageshift = 9;
+ info->smallpageshift = 0;
+ info->blocksize = 16;
+ info->blockshift = 4;
+ info->blockmask = 15;
+
+ switch (deviceID) {
+
+ case 0x6e: // 1MB
+ case 0xe8:
+ case 0xec:
+ info->pageshift = 8;
+ info->smallpageshift = 1;
+ return 0x00100000;
+
+ case 0xea: // 2MB
+ case 0x64:
+ info->pageshift = 8;
+ info->smallpageshift = 1;
+ case 0x5d: // 5d is a ROM card with pagesize 512.
+ return 0x00200000;
+
+ case 0xe3: // 4MB
+ case 0xe5:
+ case 0x6b:
+ case 0xd5:
+ return 0x00400000;
+
+ case 0xe6: // 8MB
+ case 0xd6:
+ return 0x00800000;
+
+ case 0x73: // 16MB
+ info->blocksize = 32;
+ info->blockshift = 5;
+ info->blockmask = 31;
+ return 0x01000000;
+
+ case 0x75: // 32MB
+ info->blocksize = 32;
+ info->blockshift = 5;
+ info->blockmask = 31;
+ return 0x02000000;
+
+ case 0x76: // 64MB
+ info->blocksize = 32;
+ info->blockshift = 5;
+ info->blockmask = 31;
+ return 0x04000000;
+
+ case 0x79: // 128MB
+ info->blocksize = 32;
+ info->blockshift = 5;
+ info->blockmask = 31;
+ return 0x08000000;
+
+ default: // unknown
+ return 0;
+
+ }
+}
+
+static int sddr55_read_map(struct us_data *us) {
+
+ struct sddr55_card_info *info = (struct sddr55_card_info *)(us->extra);
+ int numblocks;
+ unsigned char *buffer;
+ unsigned char *command = us->iobuf;
+ int i;
+ unsigned short lba;
+ unsigned short max_lba;
+ int result;
+
+ if (!info->capacity)
+ return -1;
+
+ numblocks = info->capacity >> (info->blockshift + info->pageshift);
+
+ buffer = kmalloc( numblocks * 2, GFP_NOIO );
+
+ if (!buffer)
+ return -1;
+
+ memset(command, 0, 8);
+ command[5] = 0xB0;
+ command[6] = numblocks * 2 / 256;
+ command[7] = 0x8A;
+
+ result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8);
+
+ if ( result != USB_STOR_XFER_GOOD) {
+ kfree (buffer);
+ return -1;
+ }
+
+ result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, buffer, numblocks * 2);
+
+ if ( result != USB_STOR_XFER_GOOD) {
+ kfree (buffer);
+ return -1;
+ }
+
+ result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, command, 2);
+
+ if ( result != USB_STOR_XFER_GOOD) {
+ kfree (buffer);
+ return -1;
+ }
+
+ kfree(info->lba_to_pba);
+ kfree(info->pba_to_lba);
+ info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
+ info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
+
+ if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
+ kfree(info->lba_to_pba);
+ kfree(info->pba_to_lba);
+ info->lba_to_pba = NULL;
+ info->pba_to_lba = NULL;
+ kfree(buffer);
+ return -1;
+ }
+
+ memset(info->lba_to_pba, 0xff, numblocks*sizeof(int));
+ memset(info->pba_to_lba, 0xff, numblocks*sizeof(int));
+
+ /* set maximum lba */
+ max_lba = info->max_log_blks;
+ if (max_lba > 1000)
+ max_lba = 1000;
+
+ // Each block is 64 bytes of control data, so block i is located in
+ // scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11)
+
+ for (i=0; i<numblocks; i++) {
+ int zone = i / 1024;
+
+ lba = short_pack(buffer[i * 2], buffer[i * 2 + 1]);
+
+ /* Every 1024 physical blocks ("zone"), the LBA numbers
+ * go back to zero, but are within a higher
+ * block of LBA's. Also, there is a maximum of
+ * 1000 LBA's per zone. In other words, in PBA
+ * 1024-2047 you will find LBA 0-999 which are
+ * really LBA 1000-1999. Yes, this wastes 24
+ * physical blocks per zone. Go figure.
+ * These devices can have blocks go bad, so there
+ * are 24 spare blocks to use when blocks do go bad.
+ */
+
+ /* SDDR55 returns 0xffff for a bad block, and 0x400 for the
+ * CIS block. (Is this true for cards 8MB or less??)
+ * Record these in the physical to logical map
+ */
+
+ info->pba_to_lba[i] = lba;
+
+ if (lba >= max_lba) {
+ continue;
+ }
+
+ if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED &&
+ !info->force_read_only) {
+ printk(KERN_WARNING
+ "sddr55: map inconsistency at LBA %04X\n",
+ lba + zone * 1000);
+ info->force_read_only = 1;
+ }
+
+ if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF))
+ usb_stor_dbg(us, "LBA %04X <-> PBA %04X\n", lba, i);
+
+ info->lba_to_pba[lba + zone * 1000] = i;
+ }
+
+ kfree(buffer);
+ return 0;
+}
+
+
+static void sddr55_card_info_destructor(void *extra) {
+ struct sddr55_card_info *info = (struct sddr55_card_info *)extra;
+
+ if (!extra)
+ return;
+
+ kfree(info->lba_to_pba);
+ kfree(info->pba_to_lba);
+}
+
+
+/*
+ * Transport for the Sandisk SDDR-55
+ */
+static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int result;
+ static unsigned char inquiry_response[8] = {
+ 0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00
+ };
+ // write-protected for now, no block descriptor support
+ static unsigned char mode_page_01[20] = {
+ 0x0, 0x12, 0x00, 0x80, 0x0, 0x0, 0x0, 0x0,
+ 0x01, 0x0A,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+ unsigned char *ptr = us->iobuf;
+ unsigned long capacity;
+ unsigned int lba;
+ unsigned int pba;
+ unsigned int page;
+ unsigned short pages;
+ struct sddr55_card_info *info;
+
+ if (!us->extra) {
+ us->extra = kzalloc(
+ sizeof(struct sddr55_card_info), GFP_NOIO);
+ if (!us->extra)
+ return USB_STOR_TRANSPORT_ERROR;
+ us->extra_destructor = sddr55_card_info_destructor;
+ }
+
+ info = (struct sddr55_card_info *)(us->extra);
+
+ if (srb->cmnd[0] == REQUEST_SENSE) {
+ usb_stor_dbg(us, "request sense %02x/%02x/%02x\n",
+ info->sense_data[2],
+ info->sense_data[12],
+ info->sense_data[13]);
+
+ memcpy (ptr, info->sense_data, sizeof info->sense_data);
+ ptr[0] = 0x70;
+ ptr[7] = 11;
+ usb_stor_set_xfer_buf (ptr, sizeof info->sense_data, srb);
+ memset (info->sense_data, 0, sizeof info->sense_data);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ memset (info->sense_data, 0, sizeof info->sense_data);
+
+ /* Dummy up a response for INQUIRY since SDDR55 doesn't
+ respond to INQUIRY commands */
+
+ if (srb->cmnd[0] == INQUIRY) {
+ memcpy(ptr, inquiry_response, 8);
+ fill_inquiry_response(us, ptr, 36);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ /* only check card status if the map isn't allocated, ie no card seen yet
+ * or if it's been over half a second since we last accessed it
+ */
+ if (info->lba_to_pba == NULL || time_after(jiffies, info->last_access + HZ/2)) {
+
+ /* check to see if a card is fitted */
+ result = sddr55_status (us);
+ if (result) {
+ result = sddr55_status (us);
+ if (!result) {
+ set_sense_info (6, 0x28, 0); /* new media, set unit attention, not ready to ready */
+ }
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ }
+
+ /* if we detected a problem with the map when writing,
+ don't allow any more access */
+ if (info->fatal_error) {
+
+ set_sense_info (3, 0x31, 0);
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ if (srb->cmnd[0] == READ_CAPACITY) {
+
+ capacity = sddr55_get_capacity(us);
+
+ if (!capacity) {
+ set_sense_info (3, 0x30, 0); /* incompatible medium */
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ info->capacity = capacity;
+
+ /* figure out the maximum logical block number, allowing for
+ * the fact that only 250 out of every 256 are used */
+ info->max_log_blks = ((info->capacity >> (info->pageshift + info->blockshift)) / 256) * 250;
+
+ /* Last page in the card, adjust as we only use 250 out of
+ * every 256 pages */
+ capacity = (capacity / 256) * 250;
+
+ capacity /= PAGESIZE;
+ capacity--;
+
+ ((__be32 *) ptr)[0] = cpu_to_be32(capacity);
+ ((__be32 *) ptr)[1] = cpu_to_be32(PAGESIZE);
+ usb_stor_set_xfer_buf(ptr, 8, srb);
+
+ sddr55_read_map(us);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == MODE_SENSE_10) {
+
+ memcpy(ptr, mode_page_01, sizeof mode_page_01);
+ ptr[3] = (info->read_only || info->force_read_only) ? 0x80 : 0;
+ usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb);
+
+ if ( (srb->cmnd[2] & 0x3F) == 0x01 ) {
+ usb_stor_dbg(us, "Dummy up request for mode page 1\n");
+ return USB_STOR_TRANSPORT_GOOD;
+
+ } else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) {
+ usb_stor_dbg(us, "Dummy up request for all mode pages\n");
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ set_sense_info (5, 0x24, 0); /* invalid field in command */
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+
+ usb_stor_dbg(us, "%s medium removal. Not that I can do anything about it...\n",
+ (srb->cmnd[4]&0x03) ? "Prevent" : "Allow");
+
+ return USB_STOR_TRANSPORT_GOOD;
+
+ }
+
+ if (srb->cmnd[0] == READ_10 || srb->cmnd[0] == WRITE_10) {
+
+ page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+ page <<= 16;
+ page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+ pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+ page <<= info->smallpageshift;
+
+ // convert page to block and page-within-block
+
+ lba = page >> info->blockshift;
+ page = page & info->blockmask;
+
+ // locate physical block corresponding to logical block
+
+ if (lba >= info->max_log_blks) {
+
+ usb_stor_dbg(us, "Error: Requested LBA %04X exceeds maximum block %04X\n",
+ lba, info->max_log_blks - 1);
+
+ set_sense_info (5, 0x24, 0); /* invalid field in command */
+
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ pba = info->lba_to_pba[lba];
+
+ if (srb->cmnd[0] == WRITE_10) {
+ usb_stor_dbg(us, "WRITE_10: write block %04X (LBA %04X) page %01X pages %d\n",
+ pba, lba, page, pages);
+
+ return sddr55_write_data(us, lba, page, pages);
+ } else {
+ usb_stor_dbg(us, "READ_10: read block %04X (LBA %04X) page %01X pages %d\n",
+ pba, lba, page, pages);
+
+ return sddr55_read_data(us, lba, page, pages);
+ }
+ }
+
+
+ if (srb->cmnd[0] == TEST_UNIT_READY) {
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == START_STOP) {
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ set_sense_info (5, 0x20, 0); /* illegal command */
+
+ return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer?
+}
+
+
+static int sddr55_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - sddr55_usb_ids) + sddr55_unusual_dev_list);
+ if (result)
+ return result;
+
+ us->transport_name = "SDDR55";
+ us->transport = sddr55_transport;
+ us->transport_reset = sddr55_reset;
+ us->max_lun = 0;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver sddr55_driver = {
+ .name = "ums-sddr55",
+ .probe = sddr55_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = sddr55_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(sddr55_driver);
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
new file mode 100644
index 000000000..008d805c3
--- /dev/null
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -0,0 +1,1874 @@
+/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+ *
+ * Current development and maintenance by:
+ * (c) 2000, 2001 Robert Baruch (autophile@starband.net)
+ * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * Developed with the assistance of:
+ * (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Flash support based on earlier work by:
+ * (c) 2002 Thomas Kreiling <usbdev@sm04.de>
+ *
+ * Many originally ATAPI devices were slightly modified to meet the USB
+ * market by using some kind of translation from ATAPI to USB on the host,
+ * and the peripheral would translate from USB back to ATAPI.
+ *
+ * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only,
+ * which does the USB-to-ATAPI conversion. By obtaining the data sheet on
+ * their device under nondisclosure agreement, I have been able to write
+ * this driver for Linux.
+ *
+ * The chip used in the device can also be used for EPP and ISA translation
+ * as well. This driver is only guaranteed to work with the ATAPI
+ * translation.
+ *
+ * See the Kconfig help text for a list of devices known to be supported by
+ * this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/cdrom.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+
+MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable");
+MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>");
+MODULE_LICENSE("GPL");
+
+/* Supported device types */
+#define USBAT_DEV_HP8200 0x01
+#define USBAT_DEV_FLASH 0x02
+
+#define USBAT_EPP_PORT 0x10
+#define USBAT_EPP_REGISTER 0x30
+#define USBAT_ATA 0x40
+#define USBAT_ISA 0x50
+
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG 0x00
+#define USBAT_CMD_WRITE_REG 0x01
+#define USBAT_CMD_READ_BLOCK 0x02
+#define USBAT_CMD_WRITE_BLOCK 0x03
+#define USBAT_CMD_COND_READ_BLOCK 0x04
+#define USBAT_CMD_COND_WRITE_BLOCK 0x05
+#define USBAT_CMD_WRITE_REGS 0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD 0x80
+#define USBAT_CMD_SET_FEAT 0x81
+#define USBAT_CMD_UIO 0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ 1
+#define USBAT_UIO_WRITE 0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ 0x20 /* full compare */
+#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE 0
+#define USBAT_FLASH_MEDIA_CF 1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME 0
+#define USBAT_FLASH_MEDIA_CHANGED 1
+
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */
+#define USBAT_ATA_FEATURES 0x11 /* set features (W) */
+#define USBAT_ATA_ERROR 0x11 /* error (R) */
+#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */
+#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */
+#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */
+#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */
+#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */
+#define USBAT_ATA_STATUS 0x17 /* device status (R) */
+#define USBAT_ATA_CMD 0x17 /* device command (W) */
+#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */
+
+/* USBAT User I/O Data registers */
+#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */
+#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */
+ /* CDT = ACKD & !UI1 & !UI0 */
+#define USBAT_UIO_1 0x20 /* I/O 1 */
+#define USBAT_UIO_0 0x10 /* I/O 0 */
+#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */
+#define USBAT_UIO_UI1 0x04 /* Input 1 */
+#define USBAT_UIO_UI0 0x02 /* Input 0 */
+#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
+
+/* USBAT User I/O Enable registers */
+#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */
+#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */
+#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */
+ /* If ACKD=1, set OE1 to 1 also. */
+#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */
+#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */
+
+/* USBAT Features */
+#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */
+#define USBAT_FEAT_U1 0x08
+#define USBAT_FEAT_U0 0x04
+#define USBAT_FEAT_ET1 0x02
+#define USBAT_FEAT_ET2 0x01
+
+struct usbat_info {
+ int devicetype;
+
+ /* Used for Flash readers only */
+ unsigned long sectors; /* total sector count */
+ unsigned long ssize; /* sector size in bytes */
+
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
+
+#define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+static int transferred = 0;
+
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
+
+static int init_usbat_cd(struct us_data *us);
+static int init_usbat_flash(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id usbat_usb_ids[] = {
+# include "unusual_usbat.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usbat_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev usbat_unusual_dev_list[] = {
+# include "unusual_usbat.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+/*
+ * Convenience function to produce an ATA read/write sectors command
+ * Use cmd=0x20 for read, cmd=0x30 for write
+ */
+static void usbat_pack_ata_sector_cmd(unsigned char *buf,
+ unsigned char thistime,
+ u32 sector, unsigned char cmd)
+{
+ buf[0] = 0;
+ buf[1] = thistime;
+ buf[2] = sector & 0xFF;
+ buf[3] = (sector >> 8) & 0xFF;
+ buf[4] = (sector >> 16) & 0xFF;
+ buf[5] = 0xE0 | ((sector >> 24) & 0x0F);
+ buf[6] = cmd;
+}
+
+/*
+ * Convenience function to get the device type (flash or hp8200)
+ */
+static int usbat_get_device_type(struct us_data *us)
+{
+ return ((struct usbat_info*)us->extra)->devicetype;
+}
+
+/*
+ * Read a register from the device
+ */
+static int usbat_read(struct us_data *us,
+ unsigned char access,
+ unsigned char reg,
+ unsigned char *content)
+{
+ return usb_stor_ctrl_transfer(us,
+ us->recv_ctrl_pipe,
+ access | USBAT_CMD_READ_REG,
+ 0xC0,
+ (u16)reg,
+ 0,
+ content,
+ 1);
+}
+
+/*
+ * Write to a register on the device
+ */
+static int usbat_write(struct us_data *us,
+ unsigned char access,
+ unsigned char reg,
+ unsigned char content)
+{
+ return usb_stor_ctrl_transfer(us,
+ us->send_ctrl_pipe,
+ access | USBAT_CMD_WRITE_REG,
+ 0x40,
+ short_pack(reg, content),
+ 0,
+ NULL,
+ 0);
+}
+
+/*
+ * Convenience function to perform a bulk read
+ */
+static int usbat_bulk_read(struct us_data *us,
+ void* buf,
+ unsigned int len,
+ int use_sg)
+{
+ if (len == 0)
+ return USB_STOR_XFER_GOOD;
+
+ usb_stor_dbg(us, "len = %d\n", len);
+ return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL);
+}
+
+/*
+ * Convenience function to perform a bulk write
+ */
+static int usbat_bulk_write(struct us_data *us,
+ void* buf,
+ unsigned int len,
+ int use_sg)
+{
+ if (len == 0)
+ return USB_STOR_XFER_GOOD;
+
+ usb_stor_dbg(us, "len = %d\n", len);
+ return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL);
+}
+
+/*
+ * Some USBAT-specific commands can only be executed over a command transport
+ * This transport allows one (len=8) or two (len=16) vendor-specific commands
+ * to be executed.
+ */
+static int usbat_execute_command(struct us_data *us,
+ unsigned char *commands,
+ unsigned int len)
+{
+ return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+ USBAT_CMD_EXEC_CMD, 0x40, 0, 0,
+ commands, len);
+}
+
+/*
+ * Read the status register
+ */
+static int usbat_get_status(struct us_data *us, unsigned char *status)
+{
+ int rc;
+ rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status);
+
+ usb_stor_dbg(us, "0x%02X\n", *status);
+ return rc;
+}
+
+/*
+ * Check the device status
+ */
+static int usbat_check_status(struct us_data *us)
+{
+ unsigned char *reply = us->iobuf;
+ int rc;
+
+ rc = usbat_get_status(us, reply);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ /* error/check condition (0x51 is ok) */
+ if (*reply & 0x01 && *reply != 0x51)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ /* device fault */
+ if (*reply & 0x20)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Stores critical information in internal registers in preparation for the execution
+ * of a conditional usbat_read_blocks or usbat_write_blocks call.
+ */
+static int usbat_set_shuttle_features(struct us_data *us,
+ unsigned char external_trigger,
+ unsigned char epp_control,
+ unsigned char mask_byte,
+ unsigned char test_pattern,
+ unsigned char subcountH,
+ unsigned char subcountL)
+{
+ unsigned char *command = us->iobuf;
+
+ command[0] = 0x40;
+ command[1] = USBAT_CMD_SET_FEAT;
+
+ /*
+ * The only bit relevant to ATA access is bit 6
+ * which defines 8 bit data access (set) or 16 bit (unset)
+ */
+ command[2] = epp_control;
+
+ /*
+ * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
+ * ET1 and ET2 define an external event to be checked for on event of a
+ * _read_blocks or _write_blocks operation. The read/write will not take
+ * place unless the defined trigger signal is active.
+ */
+ command[3] = external_trigger;
+
+ /*
+ * The resultant byte of the mask operation (see mask_byte) is compared for
+ * equivalence with this test pattern. If equal, the read/write will take
+ * place.
+ */
+ command[4] = test_pattern;
+
+ /*
+ * This value is logically ANDed with the status register field specified
+ * in the read/write command.
+ */
+ command[5] = mask_byte;
+
+ /*
+ * If ALQ is set in the qualifier, this field contains the address of the
+ * registers where the byte count should be read for transferring the data.
+ * If ALQ is not set, then this field contains the number of bytes to be
+ * transferred.
+ */
+ command[6] = subcountL;
+ command[7] = subcountH;
+
+ return usbat_execute_command(us, command, 8);
+}
+
+/*
+ * Block, waiting for an ATA device to become not busy or to report
+ * an error condition.
+ */
+static int usbat_wait_not_busy(struct us_data *us, int minutes)
+{
+ int i;
+ int result;
+ unsigned char *status = us->iobuf;
+
+ /* Synchronizing cache on a CDR could take a heck of a long time,
+ * but probably not more than 10 minutes or so. On the other hand,
+ * doing a full blank on a CDRW at speed 1 will take about 75
+ * minutes!
+ */
+
+ for (i=0; i<1200+minutes*60; i++) {
+
+ result = usbat_get_status(us, status);
+
+ if (result!=USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ if (*status & 0x01) { /* check condition */
+ result = usbat_read(us, USBAT_ATA, 0x10, status);
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ if (*status & 0x20) /* device fault */
+ return USB_STOR_TRANSPORT_FAILED;
+
+ if ((*status & 0x80)==0x00) { /* not busy */
+ usb_stor_dbg(us, "Waited not busy for %d steps\n", i);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (i<500)
+ msleep(10); /* 5 seconds */
+ else if (i<700)
+ msleep(50); /* 10 seconds */
+ else if (i<1200)
+ msleep(100); /* 50 seconds */
+ else
+ msleep(1000); /* X minutes */
+ }
+
+ usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n",
+ minutes);
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Read block data from the data register
+ */
+static int usbat_read_block(struct us_data *us,
+ void* buf,
+ unsigned short len,
+ int use_sg)
+{
+ int result;
+ unsigned char *command = us->iobuf;
+
+ if (!len)
+ return USB_STOR_TRANSPORT_GOOD;
+
+ command[0] = 0xC0;
+ command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK;
+ command[2] = USBAT_ATA_DATA;
+ command[3] = 0;
+ command[4] = 0;
+ command[5] = 0;
+ command[6] = LSB_of(len);
+ command[7] = MSB_of(len);
+
+ result = usbat_execute_command(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ result = usbat_bulk_read(us, buf, len, use_sg);
+ return (result == USB_STOR_XFER_GOOD ?
+ USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+}
+
+/*
+ * Write block data via the data register
+ */
+static int usbat_write_block(struct us_data *us,
+ unsigned char access,
+ void* buf,
+ unsigned short len,
+ int minutes,
+ int use_sg)
+{
+ int result;
+ unsigned char *command = us->iobuf;
+
+ if (!len)
+ return USB_STOR_TRANSPORT_GOOD;
+
+ command[0] = 0x40;
+ command[1] = access | USBAT_CMD_WRITE_BLOCK;
+ command[2] = USBAT_ATA_DATA;
+ command[3] = 0;
+ command[4] = 0;
+ command[5] = 0;
+ command[6] = LSB_of(len);
+ command[7] = MSB_of(len);
+
+ result = usbat_execute_command(us, command, 8);
+
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ result = usbat_bulk_write(us, buf, len, use_sg);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return usbat_wait_not_busy(us, minutes);
+}
+
+/*
+ * Process read and write requests
+ */
+static int usbat_hp8200e_rw_block_test(struct us_data *us,
+ unsigned char access,
+ unsigned char *registers,
+ unsigned char *data_out,
+ unsigned short num_registers,
+ unsigned char data_reg,
+ unsigned char status_reg,
+ unsigned char timeout,
+ unsigned char qualifier,
+ int direction,
+ void *buf,
+ unsigned short len,
+ int use_sg,
+ int minutes)
+{
+ int result;
+ unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
+ us->recv_bulk_pipe : us->send_bulk_pipe;
+
+ unsigned char *command = us->iobuf;
+ int i, j;
+ int cmdlen;
+ unsigned char *data = us->iobuf;
+ unsigned char *status = us->iobuf;
+
+ BUG_ON(num_registers > US_IOBUF_SIZE/2);
+
+ for (i=0; i<20; i++) {
+
+ /*
+ * The first time we send the full command, which consists
+ * of downloading the SCSI command followed by downloading
+ * the data via a write-and-test. Any other time we only
+ * send the command to download the data -- the SCSI command
+ * is still 'active' in some sense in the device.
+ *
+ * We're only going to try sending the data 10 times. After
+ * that, we just return a failure.
+ */
+
+ if (i==0) {
+ cmdlen = 16;
+ /*
+ * Write to multiple registers
+ * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
+ * necessary here, but that's what came out of the
+ * trace every single time.
+ */
+ command[0] = 0x40;
+ command[1] = access | USBAT_CMD_WRITE_REGS;
+ command[2] = 0x07;
+ command[3] = 0x17;
+ command[4] = 0xFC;
+ command[5] = 0xE7;
+ command[6] = LSB_of(num_registers*2);
+ command[7] = MSB_of(num_registers*2);
+ } else
+ cmdlen = 8;
+
+ /* Conditionally read or write blocks */
+ command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
+ command[cmdlen-7] = access |
+ (direction==DMA_TO_DEVICE ?
+ USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK);
+ command[cmdlen-6] = data_reg;
+ command[cmdlen-5] = status_reg;
+ command[cmdlen-4] = timeout;
+ command[cmdlen-3] = qualifier;
+ command[cmdlen-2] = LSB_of(len);
+ command[cmdlen-1] = MSB_of(len);
+
+ result = usbat_execute_command(us, command, cmdlen);
+
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (i==0) {
+
+ for (j=0; j<num_registers; j++) {
+ data[j<<1] = registers[j];
+ data[1+(j<<1)] = data_out[j];
+ }
+
+ result = usbat_bulk_write(us, data, num_registers*2, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ }
+
+ result = usb_stor_bulk_transfer_sg(us,
+ pipe, buf, len, use_sg, NULL);
+
+ /*
+ * If we get a stall on the bulk download, we'll retry
+ * the bulk download -- but not the SCSI command because
+ * in some sense the SCSI command is still 'active' and
+ * waiting for the data. Don't ask me why this should be;
+ * I'm only following what the Windoze driver did.
+ *
+ * Note that a stall for the test-and-read/write command means
+ * that the test failed. In this case we're testing to make
+ * sure that the device is error-free
+ * (i.e. bit 0 -- CHK -- of status is 0). The most likely
+ * hypothesis is that the USBAT chip somehow knows what
+ * the device will accept, but doesn't give the device any
+ * data until all data is received. Thus, the device would
+ * still be waiting for the first byte of data if a stall
+ * occurs, even if the stall implies that some data was
+ * transferred.
+ */
+
+ if (result == USB_STOR_XFER_SHORT ||
+ result == USB_STOR_XFER_STALLED) {
+
+ /*
+ * If we're reading and we stalled, then clear
+ * the bulk output pipe only the first time.
+ */
+
+ if (direction==DMA_FROM_DEVICE && i==0) {
+ if (usb_stor_clear_halt(us,
+ us->send_bulk_pipe) < 0)
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /*
+ * Read status: is the device angry, or just busy?
+ */
+
+ result = usbat_read(us, USBAT_ATA,
+ direction==DMA_TO_DEVICE ?
+ USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS,
+ status);
+
+ if (result!=USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ if (*status & 0x01) /* check condition */
+ return USB_STOR_TRANSPORT_FAILED;
+ if (*status & 0x20) /* device fault */
+ return USB_STOR_TRANSPORT_FAILED;
+
+ usb_stor_dbg(us, "Redoing %s\n",
+ direction == DMA_TO_DEVICE
+ ? "write" : "read");
+
+ } else if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ else
+ return usbat_wait_not_busy(us, minutes);
+
+ }
+
+ usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n",
+ direction == DMA_TO_DEVICE ? "Writing" : "Reading");
+
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Write to multiple registers:
+ * Allows us to write specific data to any registers. The data to be written
+ * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN
+ * which gets sent through bulk out.
+ * Not designed for large transfers of data!
+ */
+static int usbat_multiple_write(struct us_data *us,
+ unsigned char *registers,
+ unsigned char *data_out,
+ unsigned short num_registers)
+{
+ int i, result;
+ unsigned char *data = us->iobuf;
+ unsigned char *command = us->iobuf;
+
+ BUG_ON(num_registers > US_IOBUF_SIZE/2);
+
+ /* Write to multiple registers, ATA access */
+ command[0] = 0x40;
+ command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
+
+ /* No relevance */
+ command[2] = 0;
+ command[3] = 0;
+ command[4] = 0;
+ command[5] = 0;
+
+ /* Number of bytes to be transferred (incl. addresses and data) */
+ command[6] = LSB_of(num_registers*2);
+ command[7] = MSB_of(num_registers*2);
+
+ /* The setup command */
+ result = usbat_execute_command(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* Create the reg/data, reg/data sequence */
+ for (i=0; i<num_registers; i++) {
+ data[i<<1] = registers[i];
+ data[1+(i<<1)] = data_out[i];
+ }
+
+ /* Send the data */
+ result = usbat_bulk_write(us, data, num_registers*2, 0);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
+ return usbat_wait_not_busy(us, 0);
+ else
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Conditionally read blocks from device:
+ * Allows us to read blocks from a specific data register, based upon the
+ * condition that a status register can be successfully masked with a status
+ * qualifier. If this condition is not initially met, the read will wait
+ * up until a maximum amount of time has elapsed, as specified by timeout.
+ * The read will start when the condition is met, otherwise the command aborts.
+ *
+ * The qualifier defined here is not the value that is masked, it defines
+ * conditions for the write to take place. The actual masked qualifier (and
+ * other related details) are defined beforehand with _set_shuttle_features().
+ */
+static int usbat_read_blocks(struct us_data *us,
+ void* buffer,
+ int len,
+ int use_sg)
+{
+ int result;
+ unsigned char *command = us->iobuf;
+
+ command[0] = 0xC0;
+ command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
+ command[2] = USBAT_ATA_DATA;
+ command[3] = USBAT_ATA_STATUS;
+ command[4] = 0xFD; /* Timeout (ms); */
+ command[5] = USBAT_QUAL_FCQ;
+ command[6] = LSB_of(len);
+ command[7] = MSB_of(len);
+
+ /* Multiple block read setup command */
+ result = usbat_execute_command(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ /* Read the blocks we just asked for */
+ result = usbat_bulk_read(us, buffer, len, use_sg);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Conditionally write blocks to device:
+ * Allows us to write blocks to a specific data register, based upon the
+ * condition that a status register can be successfully masked with a status
+ * qualifier. If this condition is not initially met, the write will wait
+ * up until a maximum amount of time has elapsed, as specified by timeout.
+ * The read will start when the condition is met, otherwise the command aborts.
+ *
+ * The qualifier defined here is not the value that is masked, it defines
+ * conditions for the write to take place. The actual masked qualifier (and
+ * other related details) are defined beforehand with _set_shuttle_features().
+ */
+static int usbat_write_blocks(struct us_data *us,
+ void* buffer,
+ int len,
+ int use_sg)
+{
+ int result;
+ unsigned char *command = us->iobuf;
+
+ command[0] = 0x40;
+ command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
+ command[2] = USBAT_ATA_DATA;
+ command[3] = USBAT_ATA_STATUS;
+ command[4] = 0xFD; /* Timeout (ms) */
+ command[5] = USBAT_QUAL_FCQ;
+ command[6] = LSB_of(len);
+ command[7] = MSB_of(len);
+
+ /* Multiple block write setup command */
+ result = usbat_execute_command(us, command, 8);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ /* Write the data */
+ result = usbat_bulk_write(us, buffer, len, use_sg);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_FAILED;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Read the User IO register
+ */
+static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags)
+{
+ int result;
+
+ result = usb_stor_ctrl_transfer(us,
+ us->recv_ctrl_pipe,
+ USBAT_CMD_UIO,
+ 0xC0,
+ 0,
+ 0,
+ data_flags,
+ USBAT_UIO_READ);
+
+ usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags);
+
+ return result;
+}
+
+/*
+ * Write to the User IO register
+ */
+static int usbat_write_user_io(struct us_data *us,
+ unsigned char enable_flags,
+ unsigned char data_flags)
+{
+ return usb_stor_ctrl_transfer(us,
+ us->send_ctrl_pipe,
+ USBAT_CMD_UIO,
+ 0x40,
+ short_pack(enable_flags, data_flags),
+ 0,
+ NULL,
+ USBAT_UIO_WRITE);
+}
+
+/*
+ * Reset the device
+ * Often needed on media change.
+ */
+static int usbat_device_reset(struct us_data *us)
+{
+ int rc;
+
+ /*
+ * Reset peripheral, enable peripheral control signals
+ * (bring reset signal up)
+ */
+ rc = usbat_write_user_io(us,
+ USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
+ USBAT_UIO_EPAD | USBAT_UIO_1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /*
+ * Enable peripheral control signals
+ * (bring reset signal down)
+ */
+ rc = usbat_write_user_io(us,
+ USBAT_UIO_OE1 | USBAT_UIO_OE0,
+ USBAT_UIO_EPAD | USBAT_UIO_1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Enable card detect
+ */
+static int usbat_device_enable_cdt(struct us_data *us)
+{
+ int rc;
+
+ /* Enable peripheral control signals and card detect */
+ rc = usbat_write_user_io(us,
+ USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0,
+ USBAT_UIO_EPAD | USBAT_UIO_1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Determine if media is present.
+ */
+static int usbat_flash_check_media_present(struct us_data *us,
+ unsigned char *uio)
+{
+ if (*uio & USBAT_UIO_UI0) {
+ usb_stor_dbg(us, "no media detected\n");
+ return USBAT_FLASH_MEDIA_NONE;
+ }
+
+ return USBAT_FLASH_MEDIA_CF;
+}
+
+/*
+ * Determine if media has changed since last operation
+ */
+static int usbat_flash_check_media_changed(struct us_data *us,
+ unsigned char *uio)
+{
+ if (*uio & USBAT_UIO_0) {
+ usb_stor_dbg(us, "media change detected\n");
+ return USBAT_FLASH_MEDIA_CHANGED;
+ }
+
+ return USBAT_FLASH_MEDIA_SAME;
+}
+
+/*
+ * Check for media change / no media and handle the situation appropriately
+ */
+static int usbat_flash_check_media(struct us_data *us,
+ struct usbat_info *info)
+{
+ int rc;
+ unsigned char *uio = us->iobuf;
+
+ rc = usbat_read_user_io(us, uio);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* Check for media existence */
+ rc = usbat_flash_check_media_present(us, uio);
+ if (rc == USBAT_FLASH_MEDIA_NONE) {
+ info->sense_key = 0x02;
+ info->sense_asc = 0x3A;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ /* Check for media change */
+ rc = usbat_flash_check_media_changed(us, uio);
+ if (rc == USBAT_FLASH_MEDIA_CHANGED) {
+
+ /* Reset and re-enable card detect */
+ rc = usbat_device_reset(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+ rc = usbat_device_enable_cdt(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ msleep(50);
+
+ rc = usbat_read_user_io(us, uio);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ info->sense_key = UNIT_ATTENTION;
+ info->sense_asc = 0x28;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Determine whether we are controlling a flash-based reader/writer,
+ * or a HP8200-based CD drive.
+ * Sets transport functions as appropriate.
+ */
+static int usbat_identify_device(struct us_data *us,
+ struct usbat_info *info)
+{
+ int rc;
+ unsigned char status;
+
+ if (!us || !info)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ rc = usbat_device_reset(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+ msleep(500);
+
+ /*
+ * In attempt to distinguish between HP CDRW's and Flash readers, we now
+ * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
+ * readers), this command should fail with error. On ATAPI devices (i.e.
+ * CDROM drives), it should succeed.
+ */
+ rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ rc = usbat_get_status(us, &status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* Check for error bit, or if the command 'fell through' */
+ if (status == 0xA1 || !(status & 0x01)) {
+ /* Device is HP 8200 */
+ usb_stor_dbg(us, "Detected HP8200 CDRW\n");
+ info->devicetype = USBAT_DEV_HP8200;
+ } else {
+ /* Device is a CompactFlash reader/writer */
+ usb_stor_dbg(us, "Detected Flash reader/writer\n");
+ info->devicetype = USBAT_DEV_FLASH;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Set the transport function based on the device type
+ */
+static int usbat_set_transport(struct us_data *us,
+ struct usbat_info *info,
+ int devicetype)
+{
+
+ if (!info->devicetype)
+ info->devicetype = devicetype;
+
+ if (!info->devicetype)
+ usbat_identify_device(us, info);
+
+ switch (info->devicetype) {
+ default:
+ return USB_STOR_TRANSPORT_ERROR;
+
+ case USBAT_DEV_HP8200:
+ us->transport = usbat_hp8200e_transport;
+ break;
+
+ case USBAT_DEV_FLASH:
+ us->transport = usbat_flash_transport;
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * Read the media capacity
+ */
+static int usbat_flash_get_sector_count(struct us_data *us,
+ struct usbat_info *info)
+{
+ unsigned char registers[3] = {
+ USBAT_ATA_SECCNT,
+ USBAT_ATA_DEVICE,
+ USBAT_ATA_CMD,
+ };
+ unsigned char command[3] = { 0x01, 0xA0, 0xEC };
+ unsigned char *reply;
+ unsigned char status;
+ int rc;
+
+ if (!us || !info)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ reply = kmalloc(512, GFP_NOIO);
+ if (!reply)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* ATA command : IDENTIFY DEVICE */
+ rc = usbat_multiple_write(us, registers, command, 3);
+ if (rc != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Gah! identify_device failed\n");
+ rc = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ /* Read device status */
+ if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
+ rc = USB_STOR_TRANSPORT_ERROR;
+ goto leave;
+ }
+
+ msleep(100);
+
+ /* Read the device identification data */
+ rc = usbat_read_block(us, reply, 512, 0);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ info->sectors = ((u32)(reply[117]) << 24) |
+ ((u32)(reply[116]) << 16) |
+ ((u32)(reply[115]) << 8) |
+ ((u32)(reply[114]) );
+
+ rc = USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+ kfree(reply);
+ return rc;
+}
+
+/*
+ * Read data from device
+ */
+static int usbat_flash_read_data(struct us_data *us,
+ struct usbat_info *info,
+ u32 sector,
+ u32 sectors)
+{
+ unsigned char registers[7] = {
+ USBAT_ATA_FEATURES,
+ USBAT_ATA_SECCNT,
+ USBAT_ATA_SECNUM,
+ USBAT_ATA_LBA_ME,
+ USBAT_ATA_LBA_HI,
+ USBAT_ATA_DEVICE,
+ USBAT_ATA_STATUS,
+ };
+ unsigned char command[7];
+ unsigned char *buffer;
+ unsigned char thistime;
+ unsigned int totallen, alloclen;
+ int len, result;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ result = usbat_flash_check_media(us, info);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if Jumpshot
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB CF card.
+ */
+
+ if (sector > 0x0FFFFFFF)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ totallen = sectors * info->ssize;
+
+ /*
+ * Since we don't read more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
+
+ alloclen = min(totallen, 65536u);
+ buffer = kmalloc(alloclen, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ do {
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
+ len = min(totallen, alloclen);
+ thistime = (len / info->ssize) & 0xff;
+
+ /* ATA command 0x20 (READ SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
+
+ /* Write/execute ATA read command */
+ result = usbat_multiple_write(us, registers, command, 7);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ /* Read the data we just requested */
+ result = usbat_read_blocks(us, buffer, len, 0);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ usb_stor_dbg(us, "%d bytes\n", len);
+
+ /* Store the data in the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &sg_offset, TO_XFER_BUF);
+
+ sector += thistime;
+ totallen -= len;
+ } while (totallen > 0);
+
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_GOOD;
+
+leave:
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+}
+
+/*
+ * Write data to device
+ */
+static int usbat_flash_write_data(struct us_data *us,
+ struct usbat_info *info,
+ u32 sector,
+ u32 sectors)
+{
+ unsigned char registers[7] = {
+ USBAT_ATA_FEATURES,
+ USBAT_ATA_SECCNT,
+ USBAT_ATA_SECNUM,
+ USBAT_ATA_LBA_ME,
+ USBAT_ATA_LBA_HI,
+ USBAT_ATA_DEVICE,
+ USBAT_ATA_STATUS,
+ };
+ unsigned char command[7];
+ unsigned char *buffer;
+ unsigned char thistime;
+ unsigned int totallen, alloclen;
+ int len, result;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ result = usbat_flash_check_media(us, info);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if the device
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB media.
+ */
+
+ if (sector > 0x0FFFFFFF)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ totallen = sectors * info->ssize;
+
+ /*
+ * Since we don't write more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
+
+ alloclen = min(totallen, 65536u);
+ buffer = kmalloc(alloclen, GFP_NOIO);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ do {
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
+ len = min(totallen, alloclen);
+ thistime = (len / info->ssize) & 0xff;
+
+ /* Get the data from the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &sg, &sg_offset, FROM_XFER_BUF);
+
+ /* ATA command 0x30 (WRITE SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
+
+ /* Write/execute ATA write command */
+ result = usbat_multiple_write(us, registers, command, 7);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ /* Write the data */
+ result = usbat_write_blocks(us, buffer, len, 0);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ goto leave;
+
+ sector += thistime;
+ totallen -= len;
+ } while (totallen > 0);
+
+ kfree(buffer);
+ return result;
+
+leave:
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+}
+
+/*
+ * Squeeze a potentially huge (> 65535 byte) read10 command into
+ * a little ( <= 65535 byte) ATAPI pipe
+ */
+static int usbat_hp8200e_handle_read10(struct us_data *us,
+ unsigned char *registers,
+ unsigned char *data,
+ struct scsi_cmnd *srb)
+{
+ int result = USB_STOR_TRANSPORT_GOOD;
+ unsigned char *buffer;
+ unsigned int len;
+ unsigned int sector;
+ unsigned int sg_offset = 0;
+ struct scatterlist *sg = NULL;
+
+ usb_stor_dbg(us, "transfersize %d\n", srb->transfersize);
+
+ if (scsi_bufflen(srb) < 0x10000) {
+
+ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
+ registers, data, 19,
+ USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+ (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+ DMA_FROM_DEVICE,
+ scsi_sglist(srb),
+ scsi_bufflen(srb), scsi_sg_count(srb), 1);
+
+ return result;
+ }
+
+ /*
+ * Since we're requesting more data than we can handle in
+ * a single read command (max is 64k-1), we will perform
+ * multiple reads, but each read must be in multiples of
+ * a sector. Luckily the sector size is in srb->transfersize
+ * (see linux/drivers/scsi/sr.c).
+ */
+
+ if (data[7+0] == GPCMD_READ_CD) {
+ len = short_pack(data[7+9], data[7+8]);
+ len <<= 16;
+ len |= data[7+7];
+ usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len);
+ srb->transfersize = scsi_bufflen(srb)/len;
+ }
+
+ if (!srb->transfersize) {
+ srb->transfersize = 2048; /* A guess */
+ usb_stor_dbg(us, "transfersize 0, forcing %d\n",
+ srb->transfersize);
+ }
+
+ /*
+ * Since we only read in one block at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
+
+ len = (65535/srb->transfersize) * srb->transfersize;
+ usb_stor_dbg(us, "Max read is %d bytes\n", len);
+ len = min(len, scsi_bufflen(srb));
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) /* bloody hell! */
+ return USB_STOR_TRANSPORT_FAILED;
+ sector = short_pack(data[7+3], data[7+2]);
+ sector <<= 16;
+ sector |= short_pack(data[7+5], data[7+4]);
+ transferred = 0;
+
+ while (transferred != scsi_bufflen(srb)) {
+
+ if (len > scsi_bufflen(srb) - transferred)
+ len = scsi_bufflen(srb) - transferred;
+
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
+
+ /* Fix up the SCSI command sector and num sectors */
+
+ data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
+ data[7+3] = LSB_of(sector>>16);
+ data[7+4] = MSB_of(sector&0xFFFF);
+ data[7+5] = LSB_of(sector&0xFFFF);
+ if (data[7+0] == GPCMD_READ_CD)
+ data[7+6] = 0;
+ data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
+ data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
+
+ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
+ registers, data, 19,
+ USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+ (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+ DMA_FROM_DEVICE,
+ buffer,
+ len, 0, 1);
+
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ break;
+
+ /* Store the data in the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, srb,
+ &sg, &sg_offset, TO_XFER_BUF);
+
+ /* Update the amount transferred and the sector number */
+
+ transferred += len;
+ sector += len / srb->transfersize;
+
+ } /* while transferred != scsi_bufflen(srb) */
+
+ kfree(buffer);
+ return result;
+}
+
+static int usbat_select_and_test_registers(struct us_data *us)
+{
+ int selector;
+ unsigned char *status = us->iobuf;
+
+ /* try device = master, then device = slave. */
+ for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
+ if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
+ USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Initialize the USBAT processor and the storage device
+ */
+static int init_usbat(struct us_data *us, int devicetype)
+{
+ int rc;
+ struct usbat_info *info;
+ unsigned char subcountH = USBAT_ATA_LBA_HI;
+ unsigned char subcountL = USBAT_ATA_LBA_ME;
+ unsigned char *status = us->iobuf;
+
+ us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO);
+ if (!us->extra)
+ return 1;
+
+ info = (struct usbat_info *) (us->extra);
+
+ /* Enable peripheral control signals */
+ rc = usbat_write_user_io(us,
+ USBAT_UIO_OE1 | USBAT_UIO_OE0,
+ USBAT_UIO_EPAD | USBAT_UIO_1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 1\n");
+
+ msleep(2000);
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "INIT 2\n");
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 3\n");
+
+ rc = usbat_select_and_test_registers(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "INIT 4\n");
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 5\n");
+
+ /* Enable peripheral control signals and card detect */
+ rc = usbat_device_enable_cdt(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "INIT 6\n");
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 7\n");
+
+ msleep(1400);
+
+ rc = usbat_read_user_io(us, status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 8\n");
+
+ rc = usbat_select_and_test_registers(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ usb_stor_dbg(us, "INIT 9\n");
+
+ /* At this point, we need to detect which device we are using */
+ if (usbat_set_transport(us, info, devicetype))
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 10\n");
+
+ if (usbat_get_device_type(us) == USBAT_DEV_FLASH) {
+ subcountH = 0x02;
+ subcountL = 0x00;
+ }
+ rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1),
+ 0x00, 0x88, 0x08, subcountH, subcountL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ usb_stor_dbg(us, "INIT 11\n");
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Transport for the HP 8200e
+ */
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int result;
+ unsigned char *status = us->iobuf;
+ unsigned char registers[32];
+ unsigned char data[32];
+ unsigned int len;
+ int i;
+
+ len = scsi_bufflen(srb);
+
+ /* Send A0 (ATA PACKET COMMAND).
+ Note: I guess we're never going to get any of the ATA
+ commands... just ATA Packet Commands.
+ */
+
+ registers[0] = USBAT_ATA_FEATURES;
+ registers[1] = USBAT_ATA_SECCNT;
+ registers[2] = USBAT_ATA_SECNUM;
+ registers[3] = USBAT_ATA_LBA_ME;
+ registers[4] = USBAT_ATA_LBA_HI;
+ registers[5] = USBAT_ATA_DEVICE;
+ registers[6] = USBAT_ATA_CMD;
+ data[0] = 0x00;
+ data[1] = 0x00;
+ data[2] = 0x00;
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
+ data[5] = 0xB0; /* (device sel) = slave */
+ data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */
+
+ for (i=7; i<19; i++) {
+ registers[i] = 0x10;
+ data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7];
+ }
+
+ result = usbat_get_status(us, status);
+ usb_stor_dbg(us, "Status = %02X\n", *status);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+ if (srb->cmnd[0] == TEST_UNIT_READY)
+ transferred = 0;
+
+ if (srb->sc_data_direction == DMA_TO_DEVICE) {
+
+ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
+ registers, data, 19,
+ USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+ (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+ DMA_TO_DEVICE,
+ scsi_sglist(srb),
+ len, scsi_sg_count(srb), 10);
+
+ if (result == USB_STOR_TRANSPORT_GOOD) {
+ transferred += len;
+ usb_stor_dbg(us, "Wrote %08X bytes\n", transferred);
+ }
+
+ return result;
+
+ } else if (srb->cmnd[0] == READ_10 ||
+ srb->cmnd[0] == GPCMD_READ_CD) {
+
+ return usbat_hp8200e_handle_read10(us, registers, data, srb);
+
+ }
+
+ if (len > 0xFFFF) {
+ usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n",
+ len);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ result = usbat_multiple_write(us, registers, data, 7);
+
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ /*
+ * Write the 12-byte command header.
+ *
+ * If the command is BLANK then set the timer for 75 minutes.
+ * Otherwise set it for 10 minutes.
+ *
+ * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
+ * AT SPEED 4 IS UNRELIABLE!!!
+ */
+
+ result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12,
+ srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0);
+
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ /* If there is response data to be read in then do it here. */
+
+ if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
+
+ /* How many bytes to read in? Check cylL register */
+
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
+ USB_STOR_XFER_GOOD) {
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (len > 0xFF) { /* need to read cylH also */
+ len = *status;
+ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
+ USB_STOR_XFER_GOOD) {
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+ len += ((unsigned int) *status)<<8;
+ }
+ else
+ len = *status;
+
+
+ result = usbat_read_block(us, scsi_sglist(srb), len,
+ scsi_sg_count(srb));
+ }
+
+ return result;
+}
+
+/*
+ * Transport for USBAT02-based CompactFlash and similar storage devices
+ */
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
+{
+ int rc;
+ struct usbat_info *info = (struct usbat_info *) (us->extra);
+ unsigned long block, blocks;
+ unsigned char *ptr = us->iobuf;
+ static unsigned char inquiry_response[36] = {
+ 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+ };
+
+ if (srb->cmnd[0] == INQUIRY) {
+ usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
+ memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+ fill_inquiry_response(us, ptr, 36);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == READ_CAPACITY) {
+ rc = usbat_flash_check_media(us, info);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ rc = usbat_flash_get_sector_count(us, info);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ /* hard coded 512 byte sectors as per ATA spec */
+ info->ssize = 0x200;
+ usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
+ info->sectors, info->ssize);
+
+ /*
+ * build the reply
+ * note: must return the sector number of the last sector,
+ * *not* the total number of sectors
+ */
+ ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
+ ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
+ usb_stor_set_xfer_buf(ptr, 8, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == MODE_SELECT_10) {
+ usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (srb->cmnd[0] == READ_10) {
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+ usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
+ block, blocks);
+ return usbat_flash_read_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == READ_12) {
+ /*
+ * I don't think we'll ever see a READ_12 but support it anyway
+ */
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+ ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
+
+ usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
+ block, blocks);
+ return usbat_flash_read_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == WRITE_10) {
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+ usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
+ block, blocks);
+ return usbat_flash_write_data(us, info, block, blocks);
+ }
+
+ if (srb->cmnd[0] == WRITE_12) {
+ /*
+ * I don't think we'll ever see a WRITE_12 but support it anyway
+ */
+ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+ ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
+
+ blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+ ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
+
+ usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
+ block, blocks);
+ return usbat_flash_write_data(us, info, block, blocks);
+ }
+
+
+ if (srb->cmnd[0] == TEST_UNIT_READY) {
+ usb_stor_dbg(us, "TEST_UNIT_READY\n");
+
+ rc = usbat_flash_check_media(us, info);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ return usbat_check_status(us);
+ }
+
+ if (srb->cmnd[0] == REQUEST_SENSE) {
+ usb_stor_dbg(us, "REQUEST_SENSE\n");
+
+ memset(ptr, 0, 18);
+ ptr[0] = 0xF0;
+ ptr[2] = info->sense_key;
+ ptr[7] = 11;
+ ptr[12] = info->sense_asc;
+ ptr[13] = info->sense_ascq;
+ usb_stor_set_xfer_buf(ptr, 18, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+ /*
+ * sure. whatever. not like we can stop the user from popping
+ * the media out of the device (no locking doors, etc)
+ */
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
+ info->sense_key = 0x05;
+ info->sense_asc = 0x20;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+static int init_usbat_cd(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_HP8200);
+}
+
+static int init_usbat_flash(struct us_data *us)
+{
+ return init_usbat(us, USBAT_DEV_FLASH);
+}
+
+static int usbat_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - usbat_usb_ids) + usbat_unusual_dev_list);
+ if (result)
+ return result;
+
+ /* The actual transport will be determined later by the
+ * initialization routine; this is just a placeholder.
+ */
+ us->transport_name = "Shuttle USBAT";
+ us->transport = usbat_flash_transport;
+ us->transport_reset = usb_stor_CB_reset;
+ us->max_lun = 0;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver usbat_driver = {
+ .name = "ums-usbat",
+ .probe = usbat_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = usbat_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_driver(usbat_driver);
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
new file mode 100644
index 000000000..2ea657be1
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.c
@@ -0,0 +1,199 @@
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "sierra_ms.h"
+#include "debug.h"
+
+#define SWIMS_USB_REQUEST_SetSwocMode 0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo 0x0A
+#define SWIMS_USB_INDEX_SetMode 0x0000
+#define SWIMS_SET_MODE_Modem 0x0001
+
+#define TRU_NORMAL 0x01
+#define TRU_FORCE_MS 0x02
+#define TRU_FORCE_MODEM 0x03
+
+static unsigned int swi_tru_install = 1;
+module_param(swi_tru_install, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(swi_tru_install, "TRU-Install mode (1=Full Logic (def),"
+ " 2=Force CD-Rom, 3=Force Modem)");
+
+struct swoc_info {
+ __u8 rev;
+ __u8 reserved[8];
+ __u16 LinuxSKU;
+ __u16 LinuxVer;
+ __u8 reserved2[47];
+} __attribute__((__packed__));
+
+static bool containsFullLinuxPackage(struct swoc_info *swocInfo)
+{
+ if ((swocInfo->LinuxSKU >= 0x2100 && swocInfo->LinuxSKU <= 0x2FFF) ||
+ (swocInfo->LinuxSKU >= 0x7100 && swocInfo->LinuxSKU <= 0x7FFF))
+ return true;
+ else
+ return false;
+}
+
+static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
+{
+ int result;
+ dev_dbg(&udev->dev, "SWIMS: %s", "DEVICE MODE SWITCH\n");
+ result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ SWIMS_USB_REQUEST_SetSwocMode, /* __u8 request */
+ USB_TYPE_VENDOR | USB_DIR_OUT, /* __u8 request type */
+ eSWocMode, /* __u16 value */
+ 0x0000, /* __u16 index */
+ NULL, /* void *data */
+ 0, /* __u16 size */
+ USB_CTRL_SET_TIMEOUT); /* int timeout */
+ return result;
+}
+
+
+static int sierra_get_swoc_info(struct usb_device *udev,
+ struct swoc_info *swocInfo)
+{
+ int result;
+
+ dev_dbg(&udev->dev, "SWIMS: Attempting to get TRU-Install info\n");
+
+ result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ SWIMS_USB_REQUEST_GetSwocInfo, /* __u8 request */
+ USB_TYPE_VENDOR | USB_DIR_IN, /* __u8 request type */
+ 0, /* __u16 value */
+ 0, /* __u16 index */
+ (void *) swocInfo, /* void *data */
+ sizeof(struct swoc_info), /* __u16 size */
+ USB_CTRL_SET_TIMEOUT); /* int timeout */
+
+ swocInfo->LinuxSKU = le16_to_cpu(swocInfo->LinuxSKU);
+ swocInfo->LinuxVer = le16_to_cpu(swocInfo->LinuxVer);
+ return result;
+}
+
+static void debug_swoc(const struct device *dev, struct swoc_info *swocInfo)
+{
+ dev_dbg(dev, "SWIMS: SWoC Rev: %02d\n", swocInfo->rev);
+ dev_dbg(dev, "SWIMS: Linux SKU: %04X\n", swocInfo->LinuxSKU);
+ dev_dbg(dev, "SWIMS: Linux Version: %04X\n", swocInfo->LinuxVer);
+}
+
+
+static ssize_t show_truinst(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct swoc_info *swocInfo;
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct usb_device *udev = interface_to_usbdev(intf);
+ int result;
+ if (swi_tru_install == TRU_FORCE_MS) {
+ result = snprintf(buf, PAGE_SIZE, "Forced Mass Storage\n");
+ } else {
+ swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL);
+ if (!swocInfo) {
+ snprintf(buf, PAGE_SIZE, "Error\n");
+ return -ENOMEM;
+ }
+ result = sierra_get_swoc_info(udev, swocInfo);
+ if (result < 0) {
+ dev_dbg(dev, "SWIMS: failed SWoC query\n");
+ kfree(swocInfo);
+ snprintf(buf, PAGE_SIZE, "Error\n");
+ return -EIO;
+ }
+ debug_swoc(dev, swocInfo);
+ result = snprintf(buf, PAGE_SIZE,
+ "REV=%02d SKU=%04X VER=%04X\n",
+ swocInfo->rev,
+ swocInfo->LinuxSKU,
+ swocInfo->LinuxVer);
+ kfree(swocInfo);
+ }
+ return result;
+}
+static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL);
+
+int sierra_ms_init(struct us_data *us)
+{
+ int result, retries;
+ struct swoc_info *swocInfo;
+ struct usb_device *udev;
+ struct Scsi_Host *sh;
+
+ retries = 3;
+ result = 0;
+ udev = us->pusb_dev;
+
+ sh = us_to_host(us);
+ scsi_get_host_dev(sh);
+
+ /* Force Modem mode */
+ if (swi_tru_install == TRU_FORCE_MODEM) {
+ usb_stor_dbg(us, "SWIMS: Forcing Modem Mode\n");
+ result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
+ if (result < 0)
+ usb_stor_dbg(us, "SWIMS: Failed to switch to modem mode\n");
+ return -EIO;
+ }
+ /* Force Mass Storage mode (keep CD-Rom) */
+ else if (swi_tru_install == TRU_FORCE_MS) {
+ usb_stor_dbg(us, "SWIMS: Forcing Mass Storage Mode\n");
+ goto complete;
+ }
+ /* Normal TRU-Install Logic */
+ else {
+ usb_stor_dbg(us, "SWIMS: Normal SWoC Logic\n");
+
+ swocInfo = kmalloc(sizeof(struct swoc_info),
+ GFP_KERNEL);
+ if (!swocInfo)
+ return -ENOMEM;
+
+ retries = 3;
+ do {
+ retries--;
+ result = sierra_get_swoc_info(udev, swocInfo);
+ if (result < 0) {
+ usb_stor_dbg(us, "SWIMS: Failed SWoC query\n");
+ schedule_timeout_uninterruptible(2*HZ);
+ }
+ } while (retries && result < 0);
+
+ if (result < 0) {
+ usb_stor_dbg(us, "SWIMS: Completely failed SWoC query\n");
+ kfree(swocInfo);
+ return -EIO;
+ }
+
+ debug_swoc(&us->pusb_dev->dev, swocInfo);
+
+ /* If there is not Linux software on the TRU-Install device
+ * then switch to modem mode
+ */
+ if (!containsFullLinuxPackage(swocInfo)) {
+ usb_stor_dbg(us, "SWIMS: Switching to Modem Mode\n");
+ result = sierra_set_ms_mode(udev,
+ SWIMS_SET_MODE_Modem);
+ if (result < 0)
+ usb_stor_dbg(us, "SWIMS: Failed to switch modem\n");
+ kfree(swocInfo);
+ return -EIO;
+ }
+ kfree(swocInfo);
+ }
+complete:
+ result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst);
+
+ return 0;
+}
+
diff --git a/drivers/usb/storage/sierra_ms.h b/drivers/usb/storage/sierra_ms.h
new file mode 100644
index 000000000..bb48634ac
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.h
@@ -0,0 +1,4 @@
+#ifndef _SIERRA_MS_H_
+#define _SIERRA_MS_H_
+extern int sierra_ms_init(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
new file mode 100644
index 000000000..540add24a
--- /dev/null
+++ b/drivers/usb/storage/transport.c
@@ -0,0 +1,1385 @@
+/* Driver for USB Mass Storage compliant devices
+ *
+ * Current development and maintenance by:
+ * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
+ * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
+ * (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Initial work by:
+ * (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/gfp.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+
+#include <linux/usb/quirks.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "debug.h"
+
+#include <linux/blkdev.h>
+#include "../../scsi/sd.h"
+
+
+/***********************************************************************
+ * Data transfer routines
+ ***********************************************************************/
+
+/*
+ * This is subtle, so pay attention:
+ * ---------------------------------
+ * We're very concerned about races with a command abort. Hanging this code
+ * is a sure fire way to hang the kernel. (Note that this discussion applies
+ * only to transactions resulting from a scsi queued-command, since only
+ * these transactions are subject to a scsi abort. Other transactions, such
+ * as those occurring during device-specific initialization, must be handled
+ * by a separate code path.)
+ *
+ * The abort function (usb_storage_command_abort() in scsiglue.c) first
+ * sets the machine state and the ABORTING bit in us->dflags to prevent
+ * new URBs from being submitted. It then calls usb_stor_stop_transport()
+ * below, which atomically tests-and-clears the URB_ACTIVE bit in us->dflags
+ * to see if the current_urb needs to be stopped. Likewise, the SG_ACTIVE
+ * bit is tested to see if the current_sg scatter-gather request needs to be
+ * stopped. The timeout callback routine does much the same thing.
+ *
+ * When a disconnect occurs, the DISCONNECTING bit in us->dflags is set to
+ * prevent new URBs from being submitted, and usb_stor_stop_transport() is
+ * called to stop any ongoing requests.
+ *
+ * The submit function first verifies that the submitting is allowed
+ * (neither ABORTING nor DISCONNECTING bits are set) and that the submit
+ * completes without errors, and only then sets the URB_ACTIVE bit. This
+ * prevents the stop_transport() function from trying to cancel the URB
+ * while the submit call is underway. Next, the submit function must test
+ * the flags to see if an abort or disconnect occurred during the submission
+ * or before the URB_ACTIVE bit was set. If so, it's essential to cancel
+ * the URB if it hasn't been cancelled already (i.e., if the URB_ACTIVE bit
+ * is still set). Either way, the function must then wait for the URB to
+ * finish. Note that the URB can still be in progress even after a call to
+ * usb_unlink_urb() returns.
+ *
+ * The idea is that (1) once the ABORTING or DISCONNECTING bit is set,
+ * either the stop_transport() function or the submitting function
+ * is guaranteed to call usb_unlink_urb() for an active URB,
+ * and (2) test_and_clear_bit() prevents usb_unlink_urb() from being
+ * called more than once or from being called during usb_submit_urb().
+ */
+
+/* This is the completion handler which will wake us up when an URB
+ * completes.
+ */
+static void usb_stor_blocking_completion(struct urb *urb)
+{
+ struct completion *urb_done_ptr = urb->context;
+
+ complete(urb_done_ptr);
+}
+
+/* This is the common part of the URB message submission code
+ *
+ * All URBs from the usb-storage driver involved in handling a queued scsi
+ * command _must_ pass through this function (or something like it) for the
+ * abort mechanisms to work properly.
+ */
+static int usb_stor_msg_common(struct us_data *us, int timeout)
+{
+ struct completion urb_done;
+ long timeleft;
+ int status;
+
+ /* don't submit URBs during abort processing */
+ if (test_bit(US_FLIDX_ABORTING, &us->dflags))
+ return -EIO;
+
+ /* set up data structures for the wakeup system */
+ init_completion(&urb_done);
+
+ /* fill the common fields in the URB */
+ us->current_urb->context = &urb_done;
+ us->current_urb->transfer_flags = 0;
+
+ /* we assume that if transfer_buffer isn't us->iobuf then it
+ * hasn't been mapped for DMA. Yes, this is clunky, but it's
+ * easier than always having the caller tell us whether the
+ * transfer buffer has already been mapped. */
+ if (us->current_urb->transfer_buffer == us->iobuf)
+ us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ us->current_urb->transfer_dma = us->iobuf_dma;
+
+ /* submit the URB */
+ status = usb_submit_urb(us->current_urb, GFP_NOIO);
+ if (status) {
+ /* something went wrong */
+ return status;
+ }
+
+ /* since the URB has been submitted successfully, it's now okay
+ * to cancel it */
+ set_bit(US_FLIDX_URB_ACTIVE, &us->dflags);
+
+ /* did an abort occur during the submission? */
+ if (test_bit(US_FLIDX_ABORTING, &us->dflags)) {
+
+ /* cancel the URB, if it hasn't been cancelled already */
+ if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
+ usb_stor_dbg(us, "-- cancelling URB\n");
+ usb_unlink_urb(us->current_urb);
+ }
+ }
+
+ /* wait for the completion of the URB */
+ timeleft = wait_for_completion_interruptible_timeout(
+ &urb_done, timeout ? : MAX_SCHEDULE_TIMEOUT);
+
+ clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags);
+
+ if (timeleft <= 0) {
+ usb_stor_dbg(us, "%s -- cancelling URB\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ usb_kill_urb(us->current_urb);
+ }
+
+ /* return the URB status */
+ return us->current_urb->status;
+}
+
+/*
+ * Transfer one control message, with timeouts, and allowing early
+ * termination. Return codes are usual -Exxx, *not* USB_STOR_XFER_xxx.
+ */
+int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
+ u8 request, u8 requesttype, u16 value, u16 index,
+ void *data, u16 size, int timeout)
+{
+ int status;
+
+ usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
+ request, requesttype, value, index, size);
+
+ /* fill in the devrequest structure */
+ us->cr->bRequestType = requesttype;
+ us->cr->bRequest = request;
+ us->cr->wValue = cpu_to_le16(value);
+ us->cr->wIndex = cpu_to_le16(index);
+ us->cr->wLength = cpu_to_le16(size);
+
+ /* fill and submit the URB */
+ usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe,
+ (unsigned char*) us->cr, data, size,
+ usb_stor_blocking_completion, NULL);
+ status = usb_stor_msg_common(us, timeout);
+
+ /* return the actual length of the data transferred if no error */
+ if (status == 0)
+ status = us->current_urb->actual_length;
+ return status;
+}
+EXPORT_SYMBOL_GPL(usb_stor_control_msg);
+
+/* This is a version of usb_clear_halt() that allows early termination and
+ * doesn't read the status from the device -- this is because some devices
+ * crash their internal firmware when the status is requested after a halt.
+ *
+ * A definitive list of these 'bad' devices is too difficult to maintain or
+ * make complete enough to be useful. This problem was first observed on the
+ * Hagiwara FlashGate DUAL unit. However, bus traces reveal that neither
+ * MacOS nor Windows checks the status after clearing a halt.
+ *
+ * Since many vendors in this space limit their testing to interoperability
+ * with these two OSes, specification violations like this one are common.
+ */
+int usb_stor_clear_halt(struct us_data *us, unsigned int pipe)
+{
+ int result;
+ int endp = usb_pipeendpoint(pipe);
+
+ if (usb_pipein (pipe))
+ endp |= USB_DIR_IN;
+
+ result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
+ USB_ENDPOINT_HALT, endp,
+ NULL, 0, 3*HZ);
+
+ if (result >= 0)
+ usb_reset_endpoint(us->pusb_dev, endp);
+
+ usb_stor_dbg(us, "result = %d\n", result);
+ return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_clear_halt);
+
+
+/*
+ * Interpret the results of a URB transfer
+ *
+ * This function prints appropriate debugging messages, clears halts on
+ * non-control endpoints, and translates the status to the corresponding
+ * USB_STOR_XFER_xxx return code.
+ */
+static int interpret_urb_result(struct us_data *us, unsigned int pipe,
+ unsigned int length, int result, unsigned int partial)
+{
+ usb_stor_dbg(us, "Status code %d; transferred %u/%u\n",
+ result, partial, length);
+ switch (result) {
+
+ /* no error code; did we send all the data? */
+ case 0:
+ if (partial != length) {
+ usb_stor_dbg(us, "-- short transfer\n");
+ return USB_STOR_XFER_SHORT;
+ }
+
+ usb_stor_dbg(us, "-- transfer complete\n");
+ return USB_STOR_XFER_GOOD;
+
+ /* stalled */
+ case -EPIPE:
+ /* for control endpoints, (used by CB[I]) a stall indicates
+ * a failed command */
+ if (usb_pipecontrol(pipe)) {
+ usb_stor_dbg(us, "-- stall on control pipe\n");
+ return USB_STOR_XFER_STALLED;
+ }
+
+ /* for other sorts of endpoint, clear the stall */
+ usb_stor_dbg(us, "clearing endpoint halt for pipe 0x%x\n",
+ pipe);
+ if (usb_stor_clear_halt(us, pipe) < 0)
+ return USB_STOR_XFER_ERROR;
+ return USB_STOR_XFER_STALLED;
+
+ /* babble - the device tried to send more than we wanted to read */
+ case -EOVERFLOW:
+ usb_stor_dbg(us, "-- babble\n");
+ return USB_STOR_XFER_LONG;
+
+ /* the transfer was cancelled by abort, disconnect, or timeout */
+ case -ECONNRESET:
+ usb_stor_dbg(us, "-- transfer cancelled\n");
+ return USB_STOR_XFER_ERROR;
+
+ /* short scatter-gather read transfer */
+ case -EREMOTEIO:
+ usb_stor_dbg(us, "-- short read transfer\n");
+ return USB_STOR_XFER_SHORT;
+
+ /* abort or disconnect in progress */
+ case -EIO:
+ usb_stor_dbg(us, "-- abort or disconnect in progress\n");
+ return USB_STOR_XFER_ERROR;
+
+ /* the catch-all error case */
+ default:
+ usb_stor_dbg(us, "-- unknown error\n");
+ return USB_STOR_XFER_ERROR;
+ }
+}
+
+/*
+ * Transfer one control message, without timeouts, but allowing early
+ * termination. Return codes are USB_STOR_XFER_xxx.
+ */
+int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
+ u8 request, u8 requesttype, u16 value, u16 index,
+ void *data, u16 size)
+{
+ int result;
+
+ usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
+ request, requesttype, value, index, size);
+
+ /* fill in the devrequest structure */
+ us->cr->bRequestType = requesttype;
+ us->cr->bRequest = request;
+ us->cr->wValue = cpu_to_le16(value);
+ us->cr->wIndex = cpu_to_le16(index);
+ us->cr->wLength = cpu_to_le16(size);
+
+ /* fill and submit the URB */
+ usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe,
+ (unsigned char*) us->cr, data, size,
+ usb_stor_blocking_completion, NULL);
+ result = usb_stor_msg_common(us, 0);
+
+ return interpret_urb_result(us, pipe, size, result,
+ us->current_urb->actual_length);
+}
+EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer);
+
+/*
+ * Receive one interrupt buffer, without timeouts, but allowing early
+ * termination. Return codes are USB_STOR_XFER_xxx.
+ *
+ * This routine always uses us->recv_intr_pipe as the pipe and
+ * us->ep_bInterval as the interrupt interval.
+ */
+static int usb_stor_intr_transfer(struct us_data *us, void *buf,
+ unsigned int length)
+{
+ int result;
+ unsigned int pipe = us->recv_intr_pipe;
+ unsigned int maxp;
+
+ usb_stor_dbg(us, "xfer %u bytes\n", length);
+
+ /* calculate the max packet size */
+ maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe));
+ if (maxp > length)
+ maxp = length;
+
+ /* fill and submit the URB */
+ usb_fill_int_urb(us->current_urb, us->pusb_dev, pipe, buf,
+ maxp, usb_stor_blocking_completion, NULL,
+ us->ep_bInterval);
+ result = usb_stor_msg_common(us, 0);
+
+ return interpret_urb_result(us, pipe, length, result,
+ us->current_urb->actual_length);
+}
+
+/*
+ * Transfer one buffer via bulk pipe, without timeouts, but allowing early
+ * termination. Return codes are USB_STOR_XFER_xxx. If the bulk pipe
+ * stalls during the transfer, the halt is automatically cleared.
+ */
+int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
+ void *buf, unsigned int length, unsigned int *act_len)
+{
+ int result;
+
+ usb_stor_dbg(us, "xfer %u bytes\n", length);
+
+ /* fill and submit the URB */
+ usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length,
+ usb_stor_blocking_completion, NULL);
+ result = usb_stor_msg_common(us, 0);
+
+ /* store the actual length of the data transferred */
+ if (act_len)
+ *act_len = us->current_urb->actual_length;
+ return interpret_urb_result(us, pipe, length, result,
+ us->current_urb->actual_length);
+}
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf);
+
+/*
+ * Transfer a scatter-gather list via bulk transfer
+ *
+ * This function does basically the same thing as usb_stor_bulk_transfer_buf()
+ * above, but it uses the usbcore scatter-gather library.
+ */
+static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
+ struct scatterlist *sg, int num_sg, unsigned int length,
+ unsigned int *act_len)
+{
+ int result;
+
+ /* don't submit s-g requests during abort processing */
+ if (test_bit(US_FLIDX_ABORTING, &us->dflags))
+ return USB_STOR_XFER_ERROR;
+
+ /* initialize the scatter-gather request block */
+ usb_stor_dbg(us, "xfer %u bytes, %d entries\n", length, num_sg);
+ result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0,
+ sg, num_sg, length, GFP_NOIO);
+ if (result) {
+ usb_stor_dbg(us, "usb_sg_init returned %d\n", result);
+ return USB_STOR_XFER_ERROR;
+ }
+
+ /* since the block has been initialized successfully, it's now
+ * okay to cancel it */
+ set_bit(US_FLIDX_SG_ACTIVE, &us->dflags);
+
+ /* did an abort occur during the submission? */
+ if (test_bit(US_FLIDX_ABORTING, &us->dflags)) {
+
+ /* cancel the request, if it hasn't been cancelled already */
+ if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) {
+ usb_stor_dbg(us, "-- cancelling sg request\n");
+ usb_sg_cancel(&us->current_sg);
+ }
+ }
+
+ /* wait for the completion of the transfer */
+ usb_sg_wait(&us->current_sg);
+ clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags);
+
+ result = us->current_sg.status;
+ if (act_len)
+ *act_len = us->current_sg.bytes;
+ return interpret_urb_result(us, pipe, length, result,
+ us->current_sg.bytes);
+}
+
+/*
+ * Common used function. Transfer a complete command
+ * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid
+ */
+int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
+ struct scsi_cmnd* srb)
+{
+ unsigned int partial;
+ int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb),
+ scsi_sg_count(srb), scsi_bufflen(srb),
+ &partial);
+
+ scsi_set_resid(srb, scsi_bufflen(srb) - partial);
+ return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_bulk_srb);
+
+/*
+ * Transfer an entire SCSI command's worth of data payload over the bulk
+ * pipe.
+ *
+ * Note that this uses usb_stor_bulk_transfer_buf() and
+ * usb_stor_bulk_transfer_sglist() to achieve its goals --
+ * this function simply determines whether we're going to use
+ * scatter-gather or not, and acts appropriately.
+ */
+int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
+ void *buf, unsigned int length_left, int use_sg, int *residual)
+{
+ int result;
+ unsigned int partial;
+
+ /* are we scatter-gathering? */
+ if (use_sg) {
+ /* use the usb core scatter-gather primitives */
+ result = usb_stor_bulk_transfer_sglist(us, pipe,
+ (struct scatterlist *) buf, use_sg,
+ length_left, &partial);
+ length_left -= partial;
+ } else {
+ /* no scatter-gather, just make the request */
+ result = usb_stor_bulk_transfer_buf(us, pipe, buf,
+ length_left, &partial);
+ length_left -= partial;
+ }
+
+ /* store the residual and return the error code */
+ if (residual)
+ *residual = length_left;
+ return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg);
+
+/***********************************************************************
+ * Transport routines
+ ***********************************************************************/
+
+/* There are so many devices that report the capacity incorrectly,
+ * this routine was written to counteract some of the resulting
+ * problems.
+ */
+static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
+{
+ struct gendisk *disk;
+ struct scsi_disk *sdkp;
+ u32 sector;
+
+ /* To Report "Medium Error: Record Not Found */
+ static unsigned char record_not_found[18] = {
+ [0] = 0x70, /* current error */
+ [2] = MEDIUM_ERROR, /* = 0x03 */
+ [7] = 0x0a, /* additional length */
+ [12] = 0x14 /* Record Not Found */
+ };
+
+ /* If last-sector problems can't occur, whether because the
+ * capacity was already decremented or because the device is
+ * known to report the correct capacity, then we don't need
+ * to do anything.
+ */
+ if (!us->use_last_sector_hacks)
+ return;
+
+ /* Was this command a READ(10) or a WRITE(10)? */
+ if (srb->cmnd[0] != READ_10 && srb->cmnd[0] != WRITE_10)
+ goto done;
+
+ /* Did this command access the last sector? */
+ sector = (srb->cmnd[2] << 24) | (srb->cmnd[3] << 16) |
+ (srb->cmnd[4] << 8) | (srb->cmnd[5]);
+ disk = srb->request->rq_disk;
+ if (!disk)
+ goto done;
+ sdkp = scsi_disk(disk);
+ if (!sdkp)
+ goto done;
+ if (sector + 1 != sdkp->capacity)
+ goto done;
+
+ if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) {
+
+ /* The command succeeded. We know this device doesn't
+ * have the last-sector bug, so stop checking it.
+ */
+ us->use_last_sector_hacks = 0;
+
+ } else {
+ /* The command failed. Allow up to 3 retries in case this
+ * is some normal sort of failure. After that, assume the
+ * capacity is wrong and we're trying to access the sector
+ * beyond the end. Replace the result code and sense data
+ * with values that will cause the SCSI core to fail the
+ * command immediately, instead of going into an infinite
+ * (or even just a very long) retry loop.
+ */
+ if (++us->last_sector_retries < 3)
+ return;
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ memcpy(srb->sense_buffer, record_not_found,
+ sizeof(record_not_found));
+ }
+
+ done:
+ /* Don't reset the retry counter for TEST UNIT READY commands,
+ * because they get issued after device resets which might be
+ * caused by a failed last-sector access.
+ */
+ if (srb->cmnd[0] != TEST_UNIT_READY)
+ us->last_sector_retries = 0;
+}
+
+/* Invoke the transport and basic error-handling/recovery methods
+ *
+ * This is used by the protocol layers to actually send the message to
+ * the device and receive the response.
+ */
+void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int need_auto_sense;
+ int result;
+
+ /* send the command to the transport layer */
+ scsi_set_resid(srb, 0);
+ result = us->transport(srb, us);
+
+ /* if the command gets aborted by the higher layers, we need to
+ * short-circuit all other processing
+ */
+ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+ usb_stor_dbg(us, "-- command was aborted\n");
+ srb->result = DID_ABORT << 16;
+ goto Handle_Errors;
+ }
+
+ /* if there is a transport error, reset and don't auto-sense */
+ if (result == USB_STOR_TRANSPORT_ERROR) {
+ usb_stor_dbg(us, "-- transport indicates error, resetting\n");
+ srb->result = DID_ERROR << 16;
+ goto Handle_Errors;
+ }
+
+ /* if the transport provided its own sense data, don't auto-sense */
+ if (result == USB_STOR_TRANSPORT_NO_SENSE) {
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ last_sector_hacks(us, srb);
+ return;
+ }
+
+ srb->result = SAM_STAT_GOOD;
+
+ /* Determine if we need to auto-sense
+ *
+ * I normally don't use a flag like this, but it's almost impossible
+ * to understand what's going on here if I don't.
+ */
+ need_auto_sense = 0;
+
+ /*
+ * If we're running the CB transport, which is incapable
+ * of determining status on its own, we will auto-sense
+ * unless the operation involved a data-in transfer. Devices
+ * can signal most data-in errors by stalling the bulk-in pipe.
+ */
+ if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) &&
+ srb->sc_data_direction != DMA_FROM_DEVICE) {
+ usb_stor_dbg(us, "-- CB transport device requiring auto-sense\n");
+ need_auto_sense = 1;
+ }
+
+ /*
+ * If we have a failure, we're going to do a REQUEST_SENSE
+ * automatically. Note that we differentiate between a command
+ * "failure" and an "error" in the transport mechanism.
+ */
+ if (result == USB_STOR_TRANSPORT_FAILED) {
+ usb_stor_dbg(us, "-- transport indicates command failure\n");
+ need_auto_sense = 1;
+ }
+
+ /*
+ * Determine if this device is SAT by seeing if the
+ * command executed successfully. Otherwise we'll have
+ * to wait for at least one CHECK_CONDITION to determine
+ * SANE_SENSE support
+ */
+ if (unlikely((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) &&
+ result == USB_STOR_TRANSPORT_GOOD &&
+ !(us->fflags & US_FL_SANE_SENSE) &&
+ !(us->fflags & US_FL_BAD_SENSE) &&
+ !(srb->cmnd[2] & 0x20))) {
+ usb_stor_dbg(us, "-- SAT supported, increasing auto-sense\n");
+ us->fflags |= US_FL_SANE_SENSE;
+ }
+
+ /*
+ * A short transfer on a command where we don't expect it
+ * is unusual, but it doesn't mean we need to auto-sense.
+ */
+ if ((scsi_get_resid(srb) > 0) &&
+ !((srb->cmnd[0] == REQUEST_SENSE) ||
+ (srb->cmnd[0] == INQUIRY) ||
+ (srb->cmnd[0] == MODE_SENSE) ||
+ (srb->cmnd[0] == LOG_SENSE) ||
+ (srb->cmnd[0] == MODE_SENSE_10))) {
+ usb_stor_dbg(us, "-- unexpectedly short transfer\n");
+ }
+
+ /* Now, if we need to do the auto-sense, let's do it */
+ if (need_auto_sense) {
+ int temp_result;
+ struct scsi_eh_save ses;
+ int sense_size = US_SENSE_SIZE;
+ struct scsi_sense_hdr sshdr;
+ const u8 *scdd;
+ u8 fm_ili;
+
+ /* device supports and needs bigger sense buffer */
+ if (us->fflags & US_FL_SANE_SENSE)
+ sense_size = ~0;
+Retry_Sense:
+ usb_stor_dbg(us, "Issuing auto-REQUEST_SENSE\n");
+
+ scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
+
+ /* FIXME: we must do the protocol translation here */
+ if (us->subclass == USB_SC_RBC || us->subclass == USB_SC_SCSI ||
+ us->subclass == USB_SC_CYP_ATACB)
+ srb->cmd_len = 6;
+ else
+ srb->cmd_len = 12;
+
+ /* issue the auto-sense command */
+ scsi_set_resid(srb, 0);
+ temp_result = us->transport(us->srb, us);
+
+ /* let's clean up right away */
+ scsi_eh_restore_cmnd(srb, &ses);
+
+ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+ usb_stor_dbg(us, "-- auto-sense aborted\n");
+ srb->result = DID_ABORT << 16;
+
+ /* If SANE_SENSE caused this problem, disable it */
+ if (sense_size != US_SENSE_SIZE) {
+ us->fflags &= ~US_FL_SANE_SENSE;
+ us->fflags |= US_FL_BAD_SENSE;
+ }
+ goto Handle_Errors;
+ }
+
+ /* Some devices claim to support larger sense but fail when
+ * trying to request it. When a transport failure happens
+ * using US_FS_SANE_SENSE, we always retry with a standard
+ * (small) sense request. This fixes some USB GSM modems
+ */
+ if (temp_result == USB_STOR_TRANSPORT_FAILED &&
+ sense_size != US_SENSE_SIZE) {
+ usb_stor_dbg(us, "-- auto-sense failure, retry small sense\n");
+ sense_size = US_SENSE_SIZE;
+ us->fflags &= ~US_FL_SANE_SENSE;
+ us->fflags |= US_FL_BAD_SENSE;
+ goto Retry_Sense;
+ }
+
+ /* Other failures */
+ if (temp_result != USB_STOR_TRANSPORT_GOOD) {
+ usb_stor_dbg(us, "-- auto-sense failure\n");
+
+ /* we skip the reset if this happens to be a
+ * multi-target device, since failure of an
+ * auto-sense is perfectly valid
+ */
+ srb->result = DID_ERROR << 16;
+ if (!(us->fflags & US_FL_SCM_MULT_TARG))
+ goto Handle_Errors;
+ return;
+ }
+
+ /* If the sense data returned is larger than 18-bytes then we
+ * assume this device supports requesting more in the future.
+ * The response code must be 70h through 73h inclusive.
+ */
+ if (srb->sense_buffer[7] > (US_SENSE_SIZE - 8) &&
+ !(us->fflags & US_FL_SANE_SENSE) &&
+ !(us->fflags & US_FL_BAD_SENSE) &&
+ (srb->sense_buffer[0] & 0x7C) == 0x70) {
+ usb_stor_dbg(us, "-- SANE_SENSE support enabled\n");
+ us->fflags |= US_FL_SANE_SENSE;
+
+ /* Indicate to the user that we truncated their sense
+ * because we didn't know it supported larger sense.
+ */
+ usb_stor_dbg(us, "-- Sense data truncated to %i from %i\n",
+ US_SENSE_SIZE,
+ srb->sense_buffer[7] + 8);
+ srb->sense_buffer[7] = (US_SENSE_SIZE - 8);
+ }
+
+ scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+
+ usb_stor_dbg(us, "-- Result from auto-sense is %d\n",
+ temp_result);
+ usb_stor_dbg(us, "-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
+ sshdr.response_code, sshdr.sense_key,
+ sshdr.asc, sshdr.ascq);
+#ifdef CONFIG_USB_STORAGE_DEBUG
+ usb_stor_show_sense(us, sshdr.sense_key, sshdr.asc, sshdr.ascq);
+#endif
+
+ /* set the result so the higher layers expect this data */
+ srb->result = SAM_STAT_CHECK_CONDITION;
+
+ scdd = scsi_sense_desc_find(srb->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE, 4);
+ fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0;
+
+ /* We often get empty sense data. This could indicate that
+ * everything worked or that there was an unspecified
+ * problem. We have to decide which.
+ */
+ if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 &&
+ fm_ili == 0) {
+ /* If things are really okay, then let's show that.
+ * Zero out the sense buffer so the higher layers
+ * won't realize we did an unsolicited auto-sense.
+ */
+ if (result == USB_STOR_TRANSPORT_GOOD) {
+ srb->result = SAM_STAT_GOOD;
+ srb->sense_buffer[0] = 0x0;
+
+ /* If there was a problem, report an unspecified
+ * hardware error to prevent the higher layers from
+ * entering an infinite retry loop.
+ */
+ } else {
+ srb->result = DID_ERROR << 16;
+ if ((sshdr.response_code & 0x72) == 0x72)
+ srb->sense_buffer[1] = HARDWARE_ERROR;
+ else
+ srb->sense_buffer[2] = HARDWARE_ERROR;
+ }
+ }
+ }
+
+ /*
+ * Some devices don't work or return incorrect data the first
+ * time they get a READ(10) command, or for the first READ(10)
+ * after a media change. If the INITIAL_READ10 flag is set,
+ * keep track of whether READ(10) commands succeed. If the
+ * previous one succeeded and this one failed, set the REDO_READ10
+ * flag to force a retry.
+ */
+ if (unlikely((us->fflags & US_FL_INITIAL_READ10) &&
+ srb->cmnd[0] == READ_10)) {
+ if (srb->result == SAM_STAT_GOOD) {
+ set_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+ } else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) {
+ clear_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+ set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+ }
+
+ /*
+ * Next, if the REDO_READ10 flag is set, return a result
+ * code that will cause the SCSI core to retry the READ(10)
+ * command immediately.
+ */
+ if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) {
+ clear_bit(US_FLIDX_REDO_READ10, &us->dflags);
+ srb->result = DID_IMM_RETRY << 16;
+ srb->sense_buffer[0] = 0;
+ }
+ }
+
+ /* Did we transfer less than the minimum amount required? */
+ if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) &&
+ scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)
+ srb->result = DID_ERROR << 16;
+
+ last_sector_hacks(us, srb);
+ return;
+
+ /* Error and abort processing: try to resynchronize with the device
+ * by issuing a port reset. If that fails, try a class-specific
+ * device reset. */
+ Handle_Errors:
+
+ /* Set the RESETTING bit, and clear the ABORTING bit so that
+ * the reset may proceed. */
+ scsi_lock(us_to_host(us));
+ set_bit(US_FLIDX_RESETTING, &us->dflags);
+ clear_bit(US_FLIDX_ABORTING, &us->dflags);
+ scsi_unlock(us_to_host(us));
+
+ /* We must release the device lock because the pre_reset routine
+ * will want to acquire it. */
+ mutex_unlock(&us->dev_mutex);
+ result = usb_stor_port_reset(us);
+ mutex_lock(&us->dev_mutex);
+
+ if (result < 0) {
+ scsi_lock(us_to_host(us));
+ usb_stor_report_device_reset(us);
+ scsi_unlock(us_to_host(us));
+ us->transport_reset(us);
+ }
+ clear_bit(US_FLIDX_RESETTING, &us->dflags);
+ last_sector_hacks(us, srb);
+}
+
+/* Stop the current URB transfer */
+void usb_stor_stop_transport(struct us_data *us)
+{
+ /* If the state machine is blocked waiting for an URB,
+ * let's wake it up. The test_and_clear_bit() call
+ * guarantees that if a URB has just been submitted,
+ * it won't be cancelled more than once. */
+ if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
+ usb_stor_dbg(us, "-- cancelling URB\n");
+ usb_unlink_urb(us->current_urb);
+ }
+
+ /* If we are waiting for a scatter-gather operation, cancel it. */
+ if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) {
+ usb_stor_dbg(us, "-- cancelling sg request\n");
+ usb_sg_cancel(&us->current_sg);
+ }
+}
+
+/*
+ * Control/Bulk and Control/Bulk/Interrupt transport
+ */
+
+int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ unsigned int transfer_length = scsi_bufflen(srb);
+ unsigned int pipe = 0;
+ int result;
+
+ /* COMMAND STAGE */
+ /* let's send the command via the control pipe */
+ result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+ US_CBI_ADSC,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
+ us->ifnum, srb->cmnd, srb->cmd_len);
+
+ /* check the return code for the command */
+ usb_stor_dbg(us, "Call to usb_stor_ctrl_transfer() returned %d\n",
+ result);
+
+ /* if we stalled the command, it means command failed */
+ if (result == USB_STOR_XFER_STALLED) {
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ /* Uh oh... serious problem here */
+ if (result != USB_STOR_XFER_GOOD) {
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* DATA STAGE */
+ /* transfer the data payload for this command, if one exists*/
+ if (transfer_length) {
+ pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
+ us->recv_bulk_pipe : us->send_bulk_pipe;
+ result = usb_stor_bulk_srb(us, pipe, srb);
+ usb_stor_dbg(us, "CBI data stage result is 0x%x\n", result);
+
+ /* if we stalled the data transfer it means command failed */
+ if (result == USB_STOR_XFER_STALLED)
+ return USB_STOR_TRANSPORT_FAILED;
+ if (result > USB_STOR_XFER_STALLED)
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* STATUS STAGE */
+
+ /* NOTE: CB does not have a status stage. Silly, I know. So
+ * we have to catch this at a higher level.
+ */
+ if (us->protocol != USB_PR_CBI)
+ return USB_STOR_TRANSPORT_GOOD;
+
+ result = usb_stor_intr_transfer(us, us->iobuf, 2);
+ usb_stor_dbg(us, "Got interrupt data (0x%x, 0x%x)\n",
+ us->iobuf[0], us->iobuf[1]);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* UFI gives us ASC and ASCQ, like a request sense
+ *
+ * REQUEST_SENSE and INQUIRY don't affect the sense data on UFI
+ * devices, so we ignore the information for those commands. Note
+ * that this means we could be ignoring a real error on these
+ * commands, but that can't be helped.
+ */
+ if (us->subclass == USB_SC_UFI) {
+ if (srb->cmnd[0] == REQUEST_SENSE ||
+ srb->cmnd[0] == INQUIRY)
+ return USB_STOR_TRANSPORT_GOOD;
+ if (us->iobuf[0])
+ goto Failed;
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ /* If not UFI, we interpret the data as a result code
+ * The first byte should always be a 0x0.
+ *
+ * Some bogus devices don't follow that rule. They stuff the ASC
+ * into the first byte -- so if it's non-zero, call it a failure.
+ */
+ if (us->iobuf[0]) {
+ usb_stor_dbg(us, "CBI IRQ data showed reserved bType 0x%x\n",
+ us->iobuf[0]);
+ goto Failed;
+
+ }
+
+ /* The second byte & 0x0F should be 0x0 for good, otherwise error */
+ switch (us->iobuf[1] & 0x0F) {
+ case 0x00:
+ return USB_STOR_TRANSPORT_GOOD;
+ case 0x01:
+ goto Failed;
+ }
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* the CBI spec requires that the bulk pipe must be cleared
+ * following any data-in/out command failure (section 2.4.3.1.3)
+ */
+ Failed:
+ if (pipe)
+ usb_stor_clear_halt(us, pipe);
+ return USB_STOR_TRANSPORT_FAILED;
+}
+EXPORT_SYMBOL_GPL(usb_stor_CB_transport);
+
+/*
+ * Bulk only transport
+ */
+
+/* Determine what the maximum LUN supported is */
+int usb_stor_Bulk_max_lun(struct us_data *us)
+{
+ int result;
+
+ /* issue the command */
+ us->iobuf[0] = 0;
+ result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
+ US_BULK_GET_MAX_LUN,
+ USB_DIR_IN | USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE,
+ 0, us->ifnum, us->iobuf, 1, 10*HZ);
+
+ usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n",
+ result, us->iobuf[0]);
+
+ /*
+ * If we have a successful request, return the result if valid. The
+ * CBW LUN field is 4 bits wide, so the value reported by the device
+ * should fit into that.
+ */
+ if (result > 0) {
+ if (us->iobuf[0] < 16) {
+ return us->iobuf[0];
+ } else {
+ dev_info(&us->pusb_intf->dev,
+ "Max LUN %d is not valid, using 0 instead",
+ us->iobuf[0]);
+ }
+ }
+
+ /*
+ * Some devices don't like GetMaxLUN. They may STALL the control
+ * pipe, they may return a zero-length result, they may do nothing at
+ * all and timeout, or they may fail in even more bizarrely creative
+ * ways. In these cases the best approach is to use the default
+ * value: only one LUN.
+ */
+ return 0;
+}
+
+int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
+ unsigned int transfer_length = scsi_bufflen(srb);
+ unsigned int residue;
+ int result;
+ int fake_sense = 0;
+ unsigned int cswlen;
+ unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
+
+ /* Take care of BULK32 devices; set extra byte to 0 */
+ if (unlikely(us->fflags & US_FL_BULK32)) {
+ cbwlen = 32;
+ us->iobuf[31] = 0;
+ }
+
+ /* set up the command wrapper */
+ bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcb->DataTransferLength = cpu_to_le32(transfer_length);
+ bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ?
+ US_BULK_FLAG_IN : 0;
+ bcb->Tag = ++us->tag;
+ bcb->Lun = srb->device->lun;
+ if (us->fflags & US_FL_SCM_MULT_TARG)
+ bcb->Lun |= srb->device->id << 4;
+ bcb->Length = srb->cmd_len;
+
+ /* copy the command payload */
+ memset(bcb->CDB, 0, sizeof(bcb->CDB));
+ memcpy(bcb->CDB, srb->cmnd, bcb->Length);
+
+ /* send it to out endpoint */
+ usb_stor_dbg(us, "Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n",
+ le32_to_cpu(bcb->Signature), bcb->Tag,
+ le32_to_cpu(bcb->DataTransferLength), bcb->Flags,
+ (bcb->Lun >> 4), (bcb->Lun & 0x0F),
+ bcb->Length);
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ bcb, cbwlen, NULL);
+ usb_stor_dbg(us, "Bulk command transfer result=%d\n", result);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* DATA STAGE */
+ /* send/receive data payload, if there is any */
+
+ /* Some USB-IDE converter chips need a 100us delay between the
+ * command phase and the data phase. Some devices need a little
+ * more than that, probably because of clock rate inaccuracies. */
+ if (unlikely(us->fflags & US_FL_GO_SLOW))
+ udelay(125);
+
+ if (transfer_length) {
+ unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
+ us->recv_bulk_pipe : us->send_bulk_pipe;
+ result = usb_stor_bulk_srb(us, pipe, srb);
+ usb_stor_dbg(us, "Bulk data transfer result 0x%x\n", result);
+ if (result == USB_STOR_XFER_ERROR)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ /* If the device tried to send back more data than the
+ * amount requested, the spec requires us to transfer
+ * the CSW anyway. Since there's no point retrying the
+ * the command, we'll return fake sense data indicating
+ * Illegal Request, Invalid Field in CDB.
+ */
+ if (result == USB_STOR_XFER_LONG)
+ fake_sense = 1;
+
+ /*
+ * Sometimes a device will mistakenly skip the data phase
+ * and go directly to the status phase without sending a
+ * zero-length packet. If we get a 13-byte response here,
+ * check whether it really is a CSW.
+ */
+ if (result == USB_STOR_XFER_SHORT &&
+ srb->sc_data_direction == DMA_FROM_DEVICE &&
+ transfer_length - scsi_get_resid(srb) ==
+ US_BULK_CS_WRAP_LEN) {
+ struct scatterlist *sg = NULL;
+ unsigned int offset = 0;
+
+ if (usb_stor_access_xfer_buf((unsigned char *) bcs,
+ US_BULK_CS_WRAP_LEN, srb, &sg,
+ &offset, FROM_XFER_BUF) ==
+ US_BULK_CS_WRAP_LEN &&
+ bcs->Signature ==
+ cpu_to_le32(US_BULK_CS_SIGN)) {
+ usb_stor_dbg(us, "Device skipped data phase\n");
+ scsi_set_resid(srb, transfer_length);
+ goto skipped_data_phase;
+ }
+ }
+ }
+
+ /* See flow chart on pg 15 of the Bulk Only Transport spec for
+ * an explanation of how this code works.
+ */
+
+ /* get CSW for device status */
+ usb_stor_dbg(us, "Attempting to get CSW...\n");
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+
+ /* Some broken devices add unnecessary zero-length packets to the
+ * end of their data transfers. Such packets show up as 0-length
+ * CSWs. If we encounter such a thing, try to read the CSW again.
+ */
+ if (result == USB_STOR_XFER_SHORT && cswlen == 0) {
+ usb_stor_dbg(us, "Received 0-length CSW; retrying...\n");
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+ }
+
+ /* did the attempt to read the CSW fail? */
+ if (result == USB_STOR_XFER_STALLED) {
+
+ /* get the status again */
+ usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n");
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ bcs, US_BULK_CS_WRAP_LEN, NULL);
+ }
+
+ /* if we still have a failure at this point, we're in trouble */
+ usb_stor_dbg(us, "Bulk status result = %d\n", result);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ skipped_data_phase:
+ /* check bulk status */
+ residue = le32_to_cpu(bcs->Residue);
+ usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
+ le32_to_cpu(bcs->Signature), bcs->Tag,
+ residue, bcs->Status);
+ if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) ||
+ bcs->Status > US_BULK_STAT_PHASE) {
+ usb_stor_dbg(us, "Bulk logical error\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Some broken devices report odd signatures, so we do not check them
+ * for validity against the spec. We store the first one we see,
+ * and check subsequent transfers for validity against this signature.
+ */
+ if (!us->bcs_signature) {
+ us->bcs_signature = bcs->Signature;
+ if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN))
+ usb_stor_dbg(us, "Learnt BCS signature 0x%08X\n",
+ le32_to_cpu(us->bcs_signature));
+ } else if (bcs->Signature != us->bcs_signature) {
+ usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n",
+ le32_to_cpu(bcs->Signature),
+ le32_to_cpu(us->bcs_signature));
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* try to compute the actual residue, based on how much data
+ * was really transferred and what the device tells us */
+ if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
+
+ /* Heuristically detect devices that generate bogus residues
+ * by seeing what happens with INQUIRY and READ CAPACITY
+ * commands.
+ */
+ if (bcs->Status == US_BULK_STAT_OK &&
+ scsi_get_resid(srb) == 0 &&
+ ((srb->cmnd[0] == INQUIRY &&
+ transfer_length == 36) ||
+ (srb->cmnd[0] == READ_CAPACITY &&
+ transfer_length == 8))) {
+ us->fflags |= US_FL_IGNORE_RESIDUE;
+
+ } else {
+ residue = min(residue, transfer_length);
+ scsi_set_resid(srb, max(scsi_get_resid(srb),
+ (int) residue));
+ }
+ }
+
+ /* based on the status code, we report good or bad */
+ switch (bcs->Status) {
+ case US_BULK_STAT_OK:
+ /* device babbled -- return fake sense data */
+ if (fake_sense) {
+ memcpy(srb->sense_buffer,
+ usb_stor_sense_invalidCDB,
+ sizeof(usb_stor_sense_invalidCDB));
+ return USB_STOR_TRANSPORT_NO_SENSE;
+ }
+
+ /* command good -- note that data could be short */
+ return USB_STOR_TRANSPORT_GOOD;
+
+ case US_BULK_STAT_FAIL:
+ /* command failed */
+ return USB_STOR_TRANSPORT_FAILED;
+
+ case US_BULK_STAT_PHASE:
+ /* phase error -- note that a transport reset will be
+ * invoked by the invoke_transport() function
+ */
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* we should never get here, but if we do, we're in trouble */
+ return USB_STOR_TRANSPORT_ERROR;
+}
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport);
+
+/***********************************************************************
+ * Reset routines
+ ***********************************************************************/
+
+/* This is the common part of the device reset code.
+ *
+ * It's handy that every transport mechanism uses the control endpoint for
+ * resets.
+ *
+ * Basically, we send a reset with a 5-second timeout, so we don't get
+ * jammed attempting to do the reset.
+ */
+static int usb_stor_reset_common(struct us_data *us,
+ u8 request, u8 requesttype,
+ u16 value, u16 index, void *data, u16 size)
+{
+ int result;
+ int result2;
+
+ if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
+ usb_stor_dbg(us, "No reset during disconnect\n");
+ return -EIO;
+ }
+
+ result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+ request, requesttype, value, index, data, size,
+ 5*HZ);
+ if (result < 0) {
+ usb_stor_dbg(us, "Soft reset failed: %d\n", result);
+ return result;
+ }
+
+ /* Give the device some time to recover from the reset,
+ * but don't delay disconnect processing. */
+ wait_event_interruptible_timeout(us->delay_wait,
+ test_bit(US_FLIDX_DISCONNECTING, &us->dflags),
+ HZ*6);
+ if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
+ usb_stor_dbg(us, "Reset interrupted by disconnect\n");
+ return -EIO;
+ }
+
+ usb_stor_dbg(us, "Soft reset: clearing bulk-in endpoint halt\n");
+ result = usb_stor_clear_halt(us, us->recv_bulk_pipe);
+
+ usb_stor_dbg(us, "Soft reset: clearing bulk-out endpoint halt\n");
+ result2 = usb_stor_clear_halt(us, us->send_bulk_pipe);
+
+ /* return a result code based on the result of the clear-halts */
+ if (result >= 0)
+ result = result2;
+ if (result < 0)
+ usb_stor_dbg(us, "Soft reset failed\n");
+ else
+ usb_stor_dbg(us, "Soft reset done\n");
+ return result;
+}
+
+/* This issues a CB[I] Reset to the device in question
+ */
+#define CB_RESET_CMD_SIZE 12
+
+int usb_stor_CB_reset(struct us_data *us)
+{
+ memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE);
+ us->iobuf[0] = SEND_DIAGNOSTIC;
+ us->iobuf[1] = 4;
+ return usb_stor_reset_common(us, US_CBI_ADSC,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE);
+}
+EXPORT_SYMBOL_GPL(usb_stor_CB_reset);
+
+/* This issues a Bulk-only Reset to the device in question, including
+ * clearing the subsequent endpoint halts that may occur.
+ */
+int usb_stor_Bulk_reset(struct us_data *us)
+{
+ return usb_stor_reset_common(us, US_BULK_RESET_REQUEST,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, us->ifnum, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset);
+
+/* Issue a USB port reset to the device. The caller must not hold
+ * us->dev_mutex.
+ */
+int usb_stor_port_reset(struct us_data *us)
+{
+ int result;
+
+ /*for these devices we must use the class specific method */
+ if (us->pusb_dev->quirks & USB_QUIRK_RESET)
+ return -EPERM;
+
+ result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
+ if (result < 0)
+ usb_stor_dbg(us, "unable to lock device for reset: %d\n",
+ result);
+ else {
+ /* Were we disconnected while waiting for the lock? */
+ if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
+ result = -EIO;
+ usb_stor_dbg(us, "No reset during disconnect\n");
+ } else {
+ result = usb_reset_device(us->pusb_dev);
+ usb_stor_dbg(us, "usb_reset_device returns %d\n",
+ result);
+ }
+ usb_unlock_device(us->pusb_dev);
+ }
+ return result;
+}
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
new file mode 100644
index 000000000..9369d752d
--- /dev/null
+++ b/drivers/usb/storage/transport.h
@@ -0,0 +1,103 @@
+/* Driver for USB Mass Storage compliant devices
+ * Transport Functions Header File
+ *
+ * Current development and maintenance by:
+ * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _TRANSPORT_H_
+#define _TRANSPORT_H_
+
+#include <linux/blkdev.h>
+
+/*
+ * usb_stor_bulk_transfer_xxx() return codes, in order of severity
+ */
+
+#define USB_STOR_XFER_GOOD 0 /* good transfer */
+#define USB_STOR_XFER_SHORT 1 /* transferred less than expected */
+#define USB_STOR_XFER_STALLED 2 /* endpoint stalled */
+#define USB_STOR_XFER_LONG 3 /* device tried to send too much */
+#define USB_STOR_XFER_ERROR 4 /* transfer died in the middle */
+
+/*
+ * Transport return codes
+ */
+
+#define USB_STOR_TRANSPORT_GOOD 0 /* Transport good, command good */
+#define USB_STOR_TRANSPORT_FAILED 1 /* Transport good, command failed */
+#define USB_STOR_TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */
+#define USB_STOR_TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */
+
+/*
+ * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED
+ * return codes. But now the transport and low-level transfer routines
+ * treat an abort as just another error (-ENOENT for a cancelled URB).
+ * It is up to the invoke_transport() function to test for aborts and
+ * distinguish them from genuine communication errors.
+ */
+
+/*
+ * CBI accept device specific command
+ */
+
+#define US_CBI_ADSC 0
+
+extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*);
+extern int usb_stor_CB_reset(struct us_data*);
+
+extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*);
+extern int usb_stor_Bulk_max_lun(struct us_data*);
+extern int usb_stor_Bulk_reset(struct us_data*);
+
+extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*);
+extern void usb_stor_stop_transport(struct us_data*);
+
+extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
+ u8 request, u8 requesttype, u16 value, u16 index,
+ void *data, u16 size, int timeout);
+extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe);
+
+extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
+ u8 request, u8 requesttype, u16 value, u16 index,
+ void *data, u16 size);
+extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
+ void *buf, unsigned int length, unsigned int *act_len);
+extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
+ void *buf, unsigned int length, int use_sg, int *residual);
+extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
+ struct scsi_cmnd* srb);
+
+extern int usb_stor_port_reset(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
new file mode 100644
index 000000000..f58caa9e6
--- /dev/null
+++ b/drivers/usb/storage/uas-detect.h
@@ -0,0 +1,143 @@
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "usb.h"
+
+static int uas_is_interface(struct usb_host_interface *intf)
+{
+ return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE &&
+ intf->desc.bInterfaceSubClass == USB_SC_SCSI &&
+ intf->desc.bInterfaceProtocol == USB_PR_UAS);
+}
+
+static int uas_find_uas_alt_setting(struct usb_interface *intf)
+{
+ int i;
+
+ for (i = 0; i < intf->num_altsetting; i++) {
+ struct usb_host_interface *alt = &intf->altsetting[i];
+
+ if (uas_is_interface(alt))
+ return alt->desc.bAlternateSetting;
+ }
+
+ return -ENODEV;
+}
+
+static int uas_find_endpoints(struct usb_host_interface *alt,
+ struct usb_host_endpoint *eps[])
+{
+ struct usb_host_endpoint *endpoint = alt->endpoint;
+ unsigned i, n_endpoints = alt->desc.bNumEndpoints;
+
+ for (i = 0; i < n_endpoints; i++) {
+ unsigned char *extra = endpoint[i].extra;
+ int len = endpoint[i].extralen;
+ while (len >= 3) {
+ if (extra[1] == USB_DT_PIPE_USAGE) {
+ unsigned pipe_id = extra[2];
+ if (pipe_id > 0 && pipe_id < 5)
+ eps[pipe_id - 1] = &endpoint[i];
+ break;
+ }
+ len -= extra[0];
+ extra += extra[0];
+ }
+ }
+
+ if (!eps[0] || !eps[1] || !eps[2] || !eps[3])
+ return -ENODEV;
+
+ return 0;
+}
+
+static int uas_use_uas_driver(struct usb_interface *intf,
+ const struct usb_device_id *id,
+ unsigned long *flags_ret)
+{
+ struct usb_host_endpoint *eps[4] = { };
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ unsigned long flags = id->driver_info;
+ int r, alt;
+
+
+ alt = uas_find_uas_alt_setting(intf);
+ if (alt < 0)
+ return 0;
+
+ r = uas_find_endpoints(&intf->altsetting[alt], eps);
+ if (r < 0)
+ return 0;
+
+ /*
+ * ASMedia has a number of usb3 to sata bridge chips, at the time of
+ * this writing the following versions exist:
+ * ASM1051 - no uas support version
+ * ASM1051 - with broken (*) uas support
+ * ASM1053 - with working uas support, but problems with large xfers
+ * ASM1153 - with working uas support
+ *
+ * Devices with these chips re-use a number of device-ids over the
+ * entire line, so the device-id is useless to determine if we're
+ * dealing with an ASM1051 (which we want to avoid).
+ *
+ * The ASM1153 can be identified by config.MaxPower == 0,
+ * where as the ASM105x models have config.MaxPower == 36.
+ *
+ * Differentiating between the ASM1053 and ASM1051 is trickier, when
+ * connected over USB-3 we can look at the number of streams supported,
+ * ASM1051 supports 32 streams, where as early ASM1053 versions support
+ * 16 streams, newer ASM1053-s also support 32 streams, but have a
+ * different prod-id.
+ *
+ * (*) ASM1051 chips do work with UAS with some disks (with the
+ * US_FL_NO_REPORT_OPCODES quirk), but are broken with other disks
+ */
+ if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c &&
+ (le16_to_cpu(udev->descriptor.idProduct) == 0x5106 ||
+ le16_to_cpu(udev->descriptor.idProduct) == 0x55aa)) {
+ if (udev->actconfig->desc.bMaxPower == 0) {
+ /* ASM1153, do nothing */
+ } else if (udev->speed < USB_SPEED_SUPER) {
+ /* No streams info, assume ASM1051 */
+ flags |= US_FL_IGNORE_UAS;
+ } else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
+ /* Possibly an ASM1051, disable uas */
+ flags |= US_FL_IGNORE_UAS;
+ } else {
+ /* ASM1053, these have issues with large transfers */
+ flags |= US_FL_MAX_SECTORS_240;
+ }
+ }
+
+ usb_stor_adjust_quirks(udev, &flags);
+
+ if (flags & US_FL_IGNORE_UAS) {
+ dev_warn(&udev->dev,
+ "UAS is blacklisted for this device, using usb-storage instead\n");
+ return 0;
+ }
+
+ if (udev->bus->sg_tablesize == 0) {
+ dev_warn(&udev->dev,
+ "The driver for the USB controller %s does not support scatter-gather which is\n",
+ hcd->driver->description);
+ dev_warn(&udev->dev,
+ "required by the UAS driver. Please try an other USB controller if you wish to use UAS.\n");
+ return 0;
+ }
+
+ if (udev->speed >= USB_SPEED_SUPER && !hcd->can_do_streams) {
+ dev_warn(&udev->dev,
+ "USB controller %s does not support streams, which are required by the UAS driver.\n",
+ hcd_to_bus(hcd)->bus_name);
+ dev_warn(&udev->dev,
+ "Please try an other USB controller if you wish to use UAS.\n");
+ return 0;
+ }
+
+ if (flags_ret)
+ *flags_ret = flags;
+
+ return 1;
+}
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
new file mode 100644
index 000000000..6d3122afe
--- /dev/null
+++ b/drivers/usb/storage/uas.c
@@ -0,0 +1,1154 @@
+/*
+ * USB Attached SCSI
+ * Note that this is not the same as the USB Mass Storage driver
+ *
+ * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2014
+ * Copyright Matthew Wilcox for Intel Corp, 2010
+ * Copyright Sarah Sharp for Intel Corp, 2010
+ *
+ * Distributed under the terms of the GNU GPL, version two.
+ */
+
+#include <linux/blkdev.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/storage.h>
+#include <linux/usb/uas.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+
+#include "uas-detect.h"
+#include "scsiglue.h"
+
+#define MAX_CMNDS 256
+
+struct uas_dev_info {
+ struct usb_interface *intf;
+ struct usb_device *udev;
+ struct usb_anchor cmd_urbs;
+ struct usb_anchor sense_urbs;
+ struct usb_anchor data_urbs;
+ unsigned long flags;
+ int qdepth, resetting;
+ unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
+ unsigned use_streams:1;
+ unsigned shutdown:1;
+ struct scsi_cmnd *cmnd[MAX_CMNDS];
+ spinlock_t lock;
+ struct work_struct work;
+};
+
+enum {
+ SUBMIT_STATUS_URB = (1 << 1),
+ ALLOC_DATA_IN_URB = (1 << 2),
+ SUBMIT_DATA_IN_URB = (1 << 3),
+ ALLOC_DATA_OUT_URB = (1 << 4),
+ SUBMIT_DATA_OUT_URB = (1 << 5),
+ ALLOC_CMD_URB = (1 << 6),
+ SUBMIT_CMD_URB = (1 << 7),
+ COMMAND_INFLIGHT = (1 << 8),
+ DATA_IN_URB_INFLIGHT = (1 << 9),
+ DATA_OUT_URB_INFLIGHT = (1 << 10),
+ COMMAND_ABORTED = (1 << 11),
+ IS_IN_WORK_LIST = (1 << 12),
+};
+
+/* Overrides scsi_pointer */
+struct uas_cmd_info {
+ unsigned int state;
+ unsigned int uas_tag;
+ struct urb *cmd_urb;
+ struct urb *data_in_urb;
+ struct urb *data_out_urb;
+};
+
+/* I hate forward declarations, but I actually have a loop */
+static int uas_submit_urbs(struct scsi_cmnd *cmnd,
+ struct uas_dev_info *devinfo, gfp_t gfp);
+static void uas_do_work(struct work_struct *work);
+static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
+static void uas_free_streams(struct uas_dev_info *devinfo);
+static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
+ int status);
+
+static void uas_do_work(struct work_struct *work)
+{
+ struct uas_dev_info *devinfo =
+ container_of(work, struct uas_dev_info, work);
+ struct uas_cmd_info *cmdinfo;
+ struct scsi_cmnd *cmnd;
+ unsigned long flags;
+ int i, err;
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+
+ if (devinfo->resetting)
+ goto out;
+
+ for (i = 0; i < devinfo->qdepth; i++) {
+ if (!devinfo->cmnd[i])
+ continue;
+
+ cmnd = devinfo->cmnd[i];
+ cmdinfo = (void *)&cmnd->SCp;
+
+ if (!(cmdinfo->state & IS_IN_WORK_LIST))
+ continue;
+
+ err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
+ if (!err)
+ cmdinfo->state &= ~IS_IN_WORK_LIST;
+ else
+ schedule_work(&devinfo->work);
+ }
+out:
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+}
+
+static void uas_add_work(struct uas_cmd_info *cmdinfo)
+{
+ struct scsi_pointer *scp = (void *)cmdinfo;
+ struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
+ struct uas_dev_info *devinfo = cmnd->device->hostdata;
+
+ lockdep_assert_held(&devinfo->lock);
+ cmdinfo->state |= IS_IN_WORK_LIST;
+ schedule_work(&devinfo->work);
+}
+
+static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
+{
+ struct uas_cmd_info *cmdinfo;
+ struct scsi_cmnd *cmnd;
+ unsigned long flags;
+ int i, err;
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+ for (i = 0; i < devinfo->qdepth; i++) {
+ if (!devinfo->cmnd[i])
+ continue;
+
+ cmnd = devinfo->cmnd[i];
+ cmdinfo = (void *)&cmnd->SCp;
+ uas_log_cmd_state(cmnd, __func__, 0);
+ /* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
+ cmdinfo->state &= ~COMMAND_INFLIGHT;
+ cmnd->result = result << 16;
+ err = uas_try_complete(cmnd, __func__);
+ WARN_ON(err != 0);
+ }
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+}
+
+static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
+{
+ struct sense_iu *sense_iu = urb->transfer_buffer;
+ struct scsi_device *sdev = cmnd->device;
+
+ if (urb->actual_length > 16) {
+ unsigned len = be16_to_cpup(&sense_iu->len);
+ if (len + 16 != urb->actual_length) {
+ int newlen = min(len + 16, urb->actual_length) - 16;
+ if (newlen < 0)
+ newlen = 0;
+ sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
+ "disagrees with IU sense data length %d, "
+ "using %d bytes of sense data\n", __func__,
+ urb->actual_length, len, newlen);
+ len = newlen;
+ }
+ memcpy(cmnd->sense_buffer, sense_iu->sense, len);
+ }
+
+ cmnd->result = sense_iu->status;
+}
+
+static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
+ int status)
+{
+ struct uas_cmd_info *ci = (void *)&cmnd->SCp;
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+
+ scmd_printk(KERN_INFO, cmnd,
+ "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
+ prefix, status, cmdinfo->uas_tag,
+ (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "",
+ (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "",
+ (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "",
+ (ci->state & ALLOC_DATA_OUT_URB) ? " a-out" : "",
+ (ci->state & SUBMIT_DATA_OUT_URB) ? " s-out" : "",
+ (ci->state & ALLOC_CMD_URB) ? " a-cmd" : "",
+ (ci->state & SUBMIT_CMD_URB) ? " s-cmd" : "",
+ (ci->state & COMMAND_INFLIGHT) ? " CMD" : "",
+ (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "",
+ (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "",
+ (ci->state & COMMAND_ABORTED) ? " abort" : "",
+ (ci->state & IS_IN_WORK_LIST) ? " work" : "");
+ scsi_print_command(cmnd);
+}
+
+static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
+{
+ struct uas_cmd_info *cmdinfo;
+
+ if (!cmnd)
+ return;
+
+ cmdinfo = (void *)&cmnd->SCp;
+
+ if (cmdinfo->state & SUBMIT_CMD_URB)
+ usb_free_urb(cmdinfo->cmd_urb);
+
+ /* data urbs may have never gotten their submit flag set */
+ if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
+ usb_free_urb(cmdinfo->data_in_urb);
+ if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
+ usb_free_urb(cmdinfo->data_out_urb);
+}
+
+static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
+{
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
+
+ lockdep_assert_held(&devinfo->lock);
+ if (cmdinfo->state & (COMMAND_INFLIGHT |
+ DATA_IN_URB_INFLIGHT |
+ DATA_OUT_URB_INFLIGHT |
+ COMMAND_ABORTED))
+ return -EBUSY;
+ devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
+ uas_free_unsubmitted_urbs(cmnd);
+ cmnd->scsi_done(cmnd);
+ return 0;
+}
+
+static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
+ unsigned direction)
+{
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ int err;
+
+ cmdinfo->state |= direction | SUBMIT_STATUS_URB;
+ err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
+ if (err) {
+ uas_add_work(cmdinfo);
+ }
+}
+
+static void uas_stat_cmplt(struct urb *urb)
+{
+ struct iu *iu = urb->transfer_buffer;
+ struct Scsi_Host *shost = urb->context;
+ struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+ struct urb *data_in_urb = NULL;
+ struct urb *data_out_urb = NULL;
+ struct scsi_cmnd *cmnd;
+ struct uas_cmd_info *cmdinfo;
+ unsigned long flags;
+ unsigned int idx;
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+
+ if (devinfo->resetting)
+ goto out;
+
+ if (urb->status) {
+ if (urb->status != -ENOENT && urb->status != -ECONNRESET) {
+ dev_err(&urb->dev->dev, "stat urb: status %d\n",
+ urb->status);
+ }
+ goto out;
+ }
+
+ idx = be16_to_cpup(&iu->tag) - 1;
+ if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
+ dev_err(&urb->dev->dev,
+ "stat urb: no pending cmd for uas-tag %d\n", idx + 1);
+ goto out;
+ }
+
+ cmnd = devinfo->cmnd[idx];
+ cmdinfo = (void *)&cmnd->SCp;
+
+ if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
+ uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
+ goto out;
+ }
+
+ switch (iu->iu_id) {
+ case IU_ID_STATUS:
+ uas_sense(urb, cmnd);
+ if (cmnd->result != 0) {
+ /* cancel data transfers on error */
+ data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
+ data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
+ }
+ cmdinfo->state &= ~COMMAND_INFLIGHT;
+ uas_try_complete(cmnd, __func__);
+ break;
+ case IU_ID_READ_READY:
+ if (!cmdinfo->data_in_urb ||
+ (cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
+ uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
+ break;
+ }
+ uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
+ break;
+ case IU_ID_WRITE_READY:
+ if (!cmdinfo->data_out_urb ||
+ (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
+ uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
+ break;
+ }
+ uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
+ break;
+ case IU_ID_RESPONSE:
+ uas_log_cmd_state(cmnd, "unexpected response iu",
+ ((struct response_iu *)iu)->response_code);
+ /* Error, cancel data transfers */
+ data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
+ data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
+ cmdinfo->state &= ~COMMAND_INFLIGHT;
+ cmnd->result = DID_ERROR << 16;
+ uas_try_complete(cmnd, __func__);
+ break;
+ default:
+ uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
+ }
+out:
+ usb_free_urb(urb);
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+
+ /* Unlinking of data urbs must be done without holding the lock */
+ if (data_in_urb) {
+ usb_unlink_urb(data_in_urb);
+ usb_put_urb(data_in_urb);
+ }
+ if (data_out_urb) {
+ usb_unlink_urb(data_out_urb);
+ usb_put_urb(data_out_urb);
+ }
+}
+
+static void uas_data_cmplt(struct urb *urb)
+{
+ struct scsi_cmnd *cmnd = urb->context;
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
+ struct scsi_data_buffer *sdb = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+
+ if (cmdinfo->data_in_urb == urb) {
+ sdb = scsi_in(cmnd);
+ cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
+ cmdinfo->data_in_urb = NULL;
+ } else if (cmdinfo->data_out_urb == urb) {
+ sdb = scsi_out(cmnd);
+ cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
+ cmdinfo->data_out_urb = NULL;
+ }
+ if (sdb == NULL) {
+ WARN_ON_ONCE(1);
+ goto out;
+ }
+
+ if (devinfo->resetting)
+ goto out;
+
+ /* Data urbs should not complete before the cmd urb is submitted */
+ if (cmdinfo->state & SUBMIT_CMD_URB) {
+ uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
+ goto out;
+ }
+
+ if (urb->status) {
+ if (urb->status != -ENOENT && urb->status != -ECONNRESET)
+ uas_log_cmd_state(cmnd, "data cmplt err", urb->status);
+ /* error: no data transfered */
+ sdb->resid = sdb->length;
+ } else {
+ sdb->resid = sdb->length - urb->actual_length;
+ }
+ uas_try_complete(cmnd, __func__);
+out:
+ usb_free_urb(urb);
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+}
+
+static void uas_cmd_cmplt(struct urb *urb)
+{
+ if (urb->status)
+ dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
+
+ usb_free_urb(urb);
+}
+
+static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
+ struct scsi_cmnd *cmnd,
+ enum dma_data_direction dir)
+{
+ struct usb_device *udev = devinfo->udev;
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ struct urb *urb = usb_alloc_urb(0, gfp);
+ struct scsi_data_buffer *sdb = (dir == DMA_FROM_DEVICE)
+ ? scsi_in(cmnd) : scsi_out(cmnd);
+ unsigned int pipe = (dir == DMA_FROM_DEVICE)
+ ? devinfo->data_in_pipe : devinfo->data_out_pipe;
+
+ if (!urb)
+ goto out;
+ usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
+ uas_data_cmplt, cmnd);
+ if (devinfo->use_streams)
+ urb->stream_id = cmdinfo->uas_tag;
+ urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
+ urb->sg = sdb->table.sgl;
+ out:
+ return urb;
+}
+
+static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
+ struct scsi_cmnd *cmnd)
+{
+ struct usb_device *udev = devinfo->udev;
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ struct urb *urb = usb_alloc_urb(0, gfp);
+ struct sense_iu *iu;
+
+ if (!urb)
+ goto out;
+
+ iu = kzalloc(sizeof(*iu), gfp);
+ if (!iu)
+ goto free;
+
+ usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
+ uas_stat_cmplt, cmnd->device->host);
+ if (devinfo->use_streams)
+ urb->stream_id = cmdinfo->uas_tag;
+ urb->transfer_flags |= URB_FREE_BUFFER;
+ out:
+ return urb;
+ free:
+ usb_free_urb(urb);
+ return NULL;
+}
+
+static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
+ struct scsi_cmnd *cmnd)
+{
+ struct usb_device *udev = devinfo->udev;
+ struct scsi_device *sdev = cmnd->device;
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ struct urb *urb = usb_alloc_urb(0, gfp);
+ struct command_iu *iu;
+ int len;
+
+ if (!urb)
+ goto out;
+
+ len = cmnd->cmd_len - 16;
+ if (len < 0)
+ len = 0;
+ len = ALIGN(len, 4);
+ iu = kzalloc(sizeof(*iu) + len, gfp);
+ if (!iu)
+ goto free;
+
+ iu->iu_id = IU_ID_COMMAND;
+ iu->tag = cpu_to_be16(cmdinfo->uas_tag);
+ iu->prio_attr = UAS_SIMPLE_TAG;
+ iu->len = len;
+ int_to_scsilun(sdev->lun, &iu->lun);
+ memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
+
+ usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
+ uas_cmd_cmplt, NULL);
+ urb->transfer_flags |= URB_FREE_BUFFER;
+ out:
+ return urb;
+ free:
+ usb_free_urb(urb);
+ return NULL;
+}
+
+/*
+ * Why should I request the Status IU before sending the Command IU? Spec
+ * says to, but also says the device may receive them in any order. Seems
+ * daft to me.
+ */
+
+static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
+{
+ struct uas_dev_info *devinfo = cmnd->device->hostdata;
+ struct urb *urb;
+ int err;
+
+ urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
+ if (!urb)
+ return NULL;
+ usb_anchor_urb(urb, &devinfo->sense_urbs);
+ err = usb_submit_urb(urb, gfp);
+ if (err) {
+ usb_unanchor_urb(urb);
+ uas_log_cmd_state(cmnd, "sense submit err", err);
+ usb_free_urb(urb);
+ return NULL;
+ }
+ return urb;
+}
+
+static int uas_submit_urbs(struct scsi_cmnd *cmnd,
+ struct uas_dev_info *devinfo, gfp_t gfp)
+{
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ struct urb *urb;
+ int err;
+
+ lockdep_assert_held(&devinfo->lock);
+ if (cmdinfo->state & SUBMIT_STATUS_URB) {
+ urb = uas_submit_sense_urb(cmnd, gfp);
+ if (!urb)
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ cmdinfo->state &= ~SUBMIT_STATUS_URB;
+ }
+
+ if (cmdinfo->state & ALLOC_DATA_IN_URB) {
+ cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
+ cmnd, DMA_FROM_DEVICE);
+ if (!cmdinfo->data_in_urb)
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ cmdinfo->state &= ~ALLOC_DATA_IN_URB;
+ }
+
+ if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
+ usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
+ err = usb_submit_urb(cmdinfo->data_in_urb, gfp);
+ if (err) {
+ usb_unanchor_urb(cmdinfo->data_in_urb);
+ uas_log_cmd_state(cmnd, "data in submit err", err);
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+ cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
+ cmdinfo->state |= DATA_IN_URB_INFLIGHT;
+ }
+
+ if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
+ cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
+ cmnd, DMA_TO_DEVICE);
+ if (!cmdinfo->data_out_urb)
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
+ }
+
+ if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
+ usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
+ err = usb_submit_urb(cmdinfo->data_out_urb, gfp);
+ if (err) {
+ usb_unanchor_urb(cmdinfo->data_out_urb);
+ uas_log_cmd_state(cmnd, "data out submit err", err);
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+ cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
+ cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
+ }
+
+ if (cmdinfo->state & ALLOC_CMD_URB) {
+ cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd);
+ if (!cmdinfo->cmd_urb)
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ cmdinfo->state &= ~ALLOC_CMD_URB;
+ }
+
+ if (cmdinfo->state & SUBMIT_CMD_URB) {
+ usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
+ err = usb_submit_urb(cmdinfo->cmd_urb, gfp);
+ if (err) {
+ usb_unanchor_urb(cmdinfo->cmd_urb);
+ uas_log_cmd_state(cmnd, "cmd submit err", err);
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+ cmdinfo->cmd_urb = NULL;
+ cmdinfo->state &= ~SUBMIT_CMD_URB;
+ cmdinfo->state |= COMMAND_INFLIGHT;
+ }
+
+ return 0;
+}
+
+static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
+ void (*done)(struct scsi_cmnd *))
+{
+ struct scsi_device *sdev = cmnd->device;
+ struct uas_dev_info *devinfo = sdev->hostdata;
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ unsigned long flags;
+ int idx, err;
+
+ BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
+
+ /* Re-check scsi_block_requests now that we've the host-lock */
+ if (cmnd->device->host->host_self_blocked)
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+
+ if ((devinfo->flags & US_FL_NO_ATA_1X) &&
+ (cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
+ memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
+ sizeof(usb_stor_sense_invalidCDB));
+ cmnd->result = SAM_STAT_CHECK_CONDITION;
+ cmnd->scsi_done(cmnd);
+ return 0;
+ }
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+
+ if (devinfo->resetting) {
+ cmnd->result = DID_ERROR << 16;
+ cmnd->scsi_done(cmnd);
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+ return 0;
+ }
+
+ /* Find a free uas-tag */
+ for (idx = 0; idx < devinfo->qdepth; idx++) {
+ if (!devinfo->cmnd[idx])
+ break;
+ }
+ if (idx == devinfo->qdepth) {
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+
+ cmnd->scsi_done = done;
+
+ memset(cmdinfo, 0, sizeof(*cmdinfo));
+ cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */
+ cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
+
+ switch (cmnd->sc_data_direction) {
+ case DMA_FROM_DEVICE:
+ cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
+ break;
+ case DMA_BIDIRECTIONAL:
+ cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
+ case DMA_TO_DEVICE:
+ cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
+ case DMA_NONE:
+ break;
+ }
+
+ if (!devinfo->use_streams)
+ cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
+
+ err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC);
+ if (err) {
+ /* If we did nothing, give up now */
+ if (cmdinfo->state & SUBMIT_STATUS_URB) {
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+ uas_add_work(cmdinfo);
+ }
+
+ devinfo->cmnd[idx] = cmnd;
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+ return 0;
+}
+
+static DEF_SCSI_QCMD(uas_queuecommand)
+
+/*
+ * For now we do not support actually sending an abort to the device, so
+ * this eh always fails. Still we must define it to make sure that we've
+ * dropped all references to the cmnd in question once this function exits.
+ */
+static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
+{
+ struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
+ struct urb *data_in_urb = NULL;
+ struct urb *data_out_urb = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+
+ uas_log_cmd_state(cmnd, __func__, 0);
+
+ /* Ensure that try_complete does not call scsi_done */
+ cmdinfo->state |= COMMAND_ABORTED;
+
+ /* Drop all refs to this cmnd, kill data urbs to break their ref */
+ devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
+ if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
+ data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
+ if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
+ data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
+
+ uas_free_unsubmitted_urbs(cmnd);
+
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+
+ if (data_in_urb) {
+ usb_kill_urb(data_in_urb);
+ usb_put_urb(data_in_urb);
+ }
+ if (data_out_urb) {
+ usb_kill_urb(data_out_urb);
+ usb_put_urb(data_out_urb);
+ }
+
+ return FAILED;
+}
+
+static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
+{
+ struct scsi_device *sdev = cmnd->device;
+ struct uas_dev_info *devinfo = sdev->hostdata;
+ struct usb_device *udev = devinfo->udev;
+ unsigned long flags;
+ int err;
+
+ err = usb_lock_device_for_reset(udev, devinfo->intf);
+ if (err) {
+ shost_printk(KERN_ERR, sdev->host,
+ "%s FAILED to get lock err %d\n", __func__, err);
+ return FAILED;
+ }
+
+ shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+ devinfo->resetting = 1;
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+
+ usb_kill_anchored_urbs(&devinfo->cmd_urbs);
+ usb_kill_anchored_urbs(&devinfo->sense_urbs);
+ usb_kill_anchored_urbs(&devinfo->data_urbs);
+ uas_zap_pending(devinfo, DID_RESET);
+
+ err = usb_reset_device(udev);
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+ devinfo->resetting = 0;
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+
+ usb_unlock_device(udev);
+
+ if (err) {
+ shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
+ __func__, err);
+ return FAILED;
+ }
+
+ shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
+ return SUCCESS;
+}
+
+static int uas_slave_alloc(struct scsi_device *sdev)
+{
+ struct uas_dev_info *devinfo =
+ (struct uas_dev_info *)sdev->host->hostdata;
+
+ sdev->hostdata = devinfo;
+
+ /* USB has unusual DMA-alignment requirements: Although the
+ * starting address of each scatter-gather element doesn't matter,
+ * the length of each element except the last must be divisible
+ * by the Bulk maxpacket value. There's currently no way to
+ * express this by block-layer constraints, so we'll cop out
+ * and simply require addresses to be aligned at 512-byte
+ * boundaries. This is okay since most block I/O involves
+ * hardware sectors that are multiples of 512 bytes in length,
+ * and since host controllers up through USB 2.0 have maxpacket
+ * values no larger than 512.
+ *
+ * But it doesn't suffice for Wireless USB, where Bulk maxpacket
+ * values can be as large as 2048. To make that work properly
+ * will require changes to the block layer.
+ */
+ blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+
+ if (devinfo->flags & US_FL_MAX_SECTORS_64)
+ blk_queue_max_hw_sectors(sdev->request_queue, 64);
+ else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+ blk_queue_max_hw_sectors(sdev->request_queue, 240);
+
+ return 0;
+}
+
+static int uas_slave_configure(struct scsi_device *sdev)
+{
+ struct uas_dev_info *devinfo = sdev->hostdata;
+
+ if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
+ sdev->no_report_opcodes = 1;
+
+ scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
+ return 0;
+}
+
+static struct scsi_host_template uas_host_template = {
+ .module = THIS_MODULE,
+ .name = "uas",
+ .queuecommand = uas_queuecommand,
+ .slave_alloc = uas_slave_alloc,
+ .slave_configure = uas_slave_configure,
+ .eh_abort_handler = uas_eh_abort_handler,
+ .eh_bus_reset_handler = uas_eh_bus_reset_handler,
+ .can_queue = 65536, /* Is there a limit on the _host_ ? */
+ .this_id = -1,
+ .sg_tablesize = SG_NONE,
+ .cmd_per_lun = 1, /* until we override it */
+ .skip_settle_delay = 1,
+ .use_blk_tags = 1,
+};
+
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id uas_usb_ids[] = {
+# include "unusual_uas.h"
+ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
+ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, uas_usb_ids);
+
+#undef UNUSUAL_DEV
+
+static int uas_switch_interface(struct usb_device *udev,
+ struct usb_interface *intf)
+{
+ int alt;
+
+ alt = uas_find_uas_alt_setting(intf);
+ if (alt < 0)
+ return alt;
+
+ return usb_set_interface(udev,
+ intf->altsetting[0].desc.bInterfaceNumber, alt);
+}
+
+static int uas_configure_endpoints(struct uas_dev_info *devinfo)
+{
+ struct usb_host_endpoint *eps[4] = { };
+ struct usb_device *udev = devinfo->udev;
+ int r;
+
+ r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
+ if (r)
+ return r;
+
+ devinfo->cmd_pipe = usb_sndbulkpipe(udev,
+ usb_endpoint_num(&eps[0]->desc));
+ devinfo->status_pipe = usb_rcvbulkpipe(udev,
+ usb_endpoint_num(&eps[1]->desc));
+ devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
+ usb_endpoint_num(&eps[2]->desc));
+ devinfo->data_out_pipe = usb_sndbulkpipe(udev,
+ usb_endpoint_num(&eps[3]->desc));
+
+ if (udev->speed < USB_SPEED_SUPER) {
+ devinfo->qdepth = 32;
+ devinfo->use_streams = 0;
+ } else {
+ devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
+ 3, MAX_CMNDS, GFP_NOIO);
+ if (devinfo->qdepth < 0)
+ return devinfo->qdepth;
+ devinfo->use_streams = 1;
+ }
+
+ return 0;
+}
+
+static void uas_free_streams(struct uas_dev_info *devinfo)
+{
+ struct usb_device *udev = devinfo->udev;
+ struct usb_host_endpoint *eps[3];
+
+ eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
+ eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
+ eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
+ usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
+}
+
+static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ int result = -ENOMEM;
+ struct Scsi_Host *shost = NULL;
+ struct uas_dev_info *devinfo;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ unsigned long dev_flags;
+
+ if (!uas_use_uas_driver(intf, id, &dev_flags))
+ return -ENODEV;
+
+ if (uas_switch_interface(udev, intf))
+ return -ENODEV;
+
+ shost = scsi_host_alloc(&uas_host_template,
+ sizeof(struct uas_dev_info));
+ if (!shost)
+ goto set_alt0;
+
+ shost->max_cmd_len = 16 + 252;
+ shost->max_id = 1;
+ shost->max_lun = 256;
+ shost->max_channel = 0;
+ shost->sg_tablesize = udev->bus->sg_tablesize;
+
+ devinfo = (struct uas_dev_info *)shost->hostdata;
+ devinfo->intf = intf;
+ devinfo->udev = udev;
+ devinfo->resetting = 0;
+ devinfo->shutdown = 0;
+ devinfo->flags = dev_flags;
+ init_usb_anchor(&devinfo->cmd_urbs);
+ init_usb_anchor(&devinfo->sense_urbs);
+ init_usb_anchor(&devinfo->data_urbs);
+ spin_lock_init(&devinfo->lock);
+ INIT_WORK(&devinfo->work, uas_do_work);
+
+ result = uas_configure_endpoints(devinfo);
+ if (result)
+ goto set_alt0;
+
+ result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2);
+ if (result)
+ goto free_streams;
+
+ usb_set_intfdata(intf, shost);
+ result = scsi_add_host(shost, &intf->dev);
+ if (result)
+ goto free_streams;
+
+ scsi_scan_host(shost);
+ return result;
+
+free_streams:
+ uas_free_streams(devinfo);
+ usb_set_intfdata(intf, NULL);
+set_alt0:
+ usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+ if (shost)
+ scsi_host_put(shost);
+ return result;
+}
+
+static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
+{
+ unsigned long flags;
+ int i, r = 1;
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+
+ for (i = 0; i < devinfo->qdepth; i++) {
+ if (devinfo->cmnd[i]) {
+ r = 0; /* Not empty */
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+
+ return r;
+}
+
+/*
+ * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
+ * get empty while there still is more work to do due to sense-urbs completing
+ * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
+ */
+static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
+{
+ unsigned long start_time;
+ int r;
+
+ start_time = jiffies;
+ do {
+ flush_work(&devinfo->work);
+
+ r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
+ if (r == 0)
+ return -ETIME;
+
+ r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
+ if (r == 0)
+ return -ETIME;
+
+ if (time_after(jiffies, start_time + 5 * HZ))
+ return -ETIME;
+ } while (!uas_cmnd_list_empty(devinfo));
+
+ return 0;
+}
+
+static int uas_pre_reset(struct usb_interface *intf)
+{
+ struct Scsi_Host *shost = usb_get_intfdata(intf);
+ struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+ unsigned long flags;
+
+ if (devinfo->shutdown)
+ return 0;
+
+ /* Block new requests */
+ spin_lock_irqsave(shost->host_lock, flags);
+ scsi_block_requests(shost);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ if (uas_wait_for_pending_cmnds(devinfo) != 0) {
+ shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
+ scsi_unblock_requests(shost);
+ return 1;
+ }
+
+ uas_free_streams(devinfo);
+
+ return 0;
+}
+
+static int uas_post_reset(struct usb_interface *intf)
+{
+ struct Scsi_Host *shost = usb_get_intfdata(intf);
+ struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+ unsigned long flags;
+ int err;
+
+ if (devinfo->shutdown)
+ return 0;
+
+ err = uas_configure_endpoints(devinfo);
+ if (err) {
+ shost_printk(KERN_ERR, shost,
+ "%s: alloc streams error %d after reset",
+ __func__, err);
+ return 1;
+ }
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ scsi_report_bus_reset(shost, 0);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ scsi_unblock_requests(shost);
+
+ return 0;
+}
+
+static int uas_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct Scsi_Host *shost = usb_get_intfdata(intf);
+ struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+
+ if (uas_wait_for_pending_cmnds(devinfo) != 0) {
+ shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
+ return -ETIME;
+ }
+
+ return 0;
+}
+
+static int uas_resume(struct usb_interface *intf)
+{
+ return 0;
+}
+
+static int uas_reset_resume(struct usb_interface *intf)
+{
+ struct Scsi_Host *shost = usb_get_intfdata(intf);
+ struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+ unsigned long flags;
+ int err;
+
+ err = uas_configure_endpoints(devinfo);
+ if (err) {
+ shost_printk(KERN_ERR, shost,
+ "%s: alloc streams error %d after reset",
+ __func__, err);
+ return -EIO;
+ }
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ scsi_report_bus_reset(shost, 0);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ return 0;
+}
+
+static void uas_disconnect(struct usb_interface *intf)
+{
+ struct Scsi_Host *shost = usb_get_intfdata(intf);
+ struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+ unsigned long flags;
+
+ spin_lock_irqsave(&devinfo->lock, flags);
+ devinfo->resetting = 1;
+ spin_unlock_irqrestore(&devinfo->lock, flags);
+
+ cancel_work_sync(&devinfo->work);
+ usb_kill_anchored_urbs(&devinfo->cmd_urbs);
+ usb_kill_anchored_urbs(&devinfo->sense_urbs);
+ usb_kill_anchored_urbs(&devinfo->data_urbs);
+ uas_zap_pending(devinfo, DID_NO_CONNECT);
+
+ scsi_remove_host(shost);
+ uas_free_streams(devinfo);
+ scsi_host_put(shost);
+}
+
+/*
+ * Put the device back in usb-storage mode on shutdown, as some BIOS-es
+ * hang on reboot when the device is still in uas mode. Note the reset is
+ * necessary as some devices won't revert to usb-storage mode without it.
+ */
+static void uas_shutdown(struct device *dev)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct Scsi_Host *shost = usb_get_intfdata(intf);
+ struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+
+ if (system_state != SYSTEM_RESTART)
+ return;
+
+ devinfo->shutdown = 1;
+ uas_free_streams(devinfo);
+ usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+ usb_reset_device(udev);
+}
+
+static struct usb_driver uas_driver = {
+ .name = "uas",
+ .probe = uas_probe,
+ .disconnect = uas_disconnect,
+ .pre_reset = uas_pre_reset,
+ .post_reset = uas_post_reset,
+ .suspend = uas_suspend,
+ .resume = uas_resume,
+ .reset_resume = uas_reset_resume,
+ .drvwrap.driver.shutdown = uas_shutdown,
+ .id_table = uas_usb_ids,
+};
+
+module_usb_driver(uas_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(
+ "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");
diff --git a/drivers/usb/storage/unusual_alauda.h b/drivers/usb/storage/unusual_alauda.h
new file mode 100644
index 000000000..fa3e9edaa
--- /dev/null
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -0,0 +1,31 @@
+/* Unusual Devices File for the Alauda-based card readers
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ALAUDA) || \
+ defined(CONFIG_USB_STORAGE_ALAUDA_MODULE)
+
+UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102,
+ "Fujifilm",
+ "DPC-R1 (Alauda)",
+ USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
+
+UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102,
+ "Olympus",
+ "MAUSB-10 (Alauda)",
+ USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
new file mode 100644
index 000000000..82e8ed032
--- /dev/null
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -0,0 +1,39 @@
+/* Unusual Devices File for devices based on the Cypress USB/ATA bridge
+ * with support for ATACB
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \
+ defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE)
+
+/* CY7C68300 : support atacb */
+UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
+ "Cypress",
+ "Cypress AT2LP",
+ USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
+ "Cypress",
+ "Cypress ISD-300LP",
+ USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160,
+ "Super Top",
+ "USB 2.0 SATA BRIDGE",
+ USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
new file mode 100644
index 000000000..582a603c7
--- /dev/null
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -0,0 +1,98 @@
+/* Unusual Devices File for the Datafab USB Compact Flash reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_DATAFAB) || \
+ defined(CONFIG_USB_STORAGE_DATAFAB_MODULE)
+
+UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
+ "Datafab",
+ "MDCFE-B USB CF Reader",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ 0),
+
+/*
+ * The following Datafab-based devices may or may not work
+ * using the current driver...the 0xffff is arbitrary since I
+ * don't know what device versions exist for these guys.
+ *
+ * The 0xa003 and 0xa004 devices in particular I'm curious about.
+ * I'm told they exist but so far nobody has come forward to say that
+ * they work with this driver. Given the success we've had getting
+ * other Datafab-based cards operational with this driver, I've decided
+ * to leave these two devices in the list.
+ */
+UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
+ "SIIG/Datafab",
+ "SIIG/Datafab Memory Stick+CF Reader/Writer",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ 0),
+
+/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
+UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
+ "Datafab/Unknown",
+ "MD2/MD3 Disk enclosure",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
+ "Datafab/Unknown",
+ "Datafab-based Reader",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ 0),
+
+UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
+ "Datafab/Unknown",
+ "Datafab-based Reader",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ 0),
+
+UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
+ "PNY/Datafab",
+ "PNY/Datafab CF+SM Reader",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ 0),
+
+UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
+ "Simple Tech/Datafab",
+ "Simple Tech/Datafab CF+SM Reader",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ 0),
+
+/* Submitted by Olaf Hering <olh@suse.de> */
+UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
+ "Datafab Systems, Inc.",
+ "USB to CF + SM Combo (LC1)",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ 0),
+
+/* Reported by Felix Moeller <felix@derklecks.de>
+ * in Germany this is sold by Hama with the productnumber 46952
+ * as "DualSlot CompactFlash(TM) & MStick Drive USB"
+ */
+UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff,
+ "DataFab Systems Inc.",
+ "USB CF+MS",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ 0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+ "Acomdata",
+ "CF",
+ USB_SC_SCSI, USB_PR_DATAFAB, NULL,
+ US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
new file mode 100644
index 000000000..caf188800
--- /dev/null
+++ b/drivers/usb/storage/unusual_devs.h
@@ -0,0 +1,2215 @@
+/* Driver for USB Mass Storage compliant devices
+ * Unusual Devices File
+ *
+ * Current development and maintenance by:
+ * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Initial work by:
+ * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* IMPORTANT NOTE: This file must be included in another file which does
+ * the following thing for it to work:
+ * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
+ * before this file is included.
+ */
+
+/* If you edit this file, please try to keep it sorted first by VendorID,
+ * then by ProductID.
+ *
+ * If you want to add an entry for this file, be sure to include the
+ * following information:
+ * - a patch that adds the entry for your device, including your
+ * email address right above the entry (plus maybe a brief
+ * explanation of the reason for the entry),
+ * - a copy of /proc/bus/usb/devices with your device plugged in
+ * running with this patch.
+ * Send your submission to either Phil Dibowitz <phil@ipom.com> or
+ * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
+ * USB development list <linux-usb@vger.kernel.org> and the USB storage list
+ * <usb-storage@lists.one-eyed-alien.net>
+ */
+
+/* Note: If you add an entry only in order to set the CAPACITY_OK flag,
+ * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is
+ * because such entries mark devices which actually work correctly,
+ * as opposed to devices that do something strangely or wrongly.
+ */
+
+/* In-kernel mode switching is deprecated. Do not add new devices to
+ * this list for the sole purpose of switching them to a different
+ * mode. Existing userspace solutions are superior.
+ *
+ * New mode switching devices should instead be added to the database
+ * maintained at http://www.draisberghof.de/usb_modeswitch/
+ */
+
+#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
+ !defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+#define NO_SDDR09
+#endif
+
+/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
+ */
+UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100,
+ "ATMEL",
+ "SND1 Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE),
+
+/* Reported by Rodolfo Quesada <rquesada@roqz.net> */
+UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003,
+ "VIA Technologies Inc.",
+ "Mitsumi multi cardreader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
+ "HP",
+ "CD-Writer+",
+ USB_SC_8070, USB_PR_CB, NULL, 0),
+
+/* Reported by Ben Efros <ben@pc-doctor.com> */
+UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000,
+ "HP",
+ "Personal Media Drive",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE ),
+
+/* Reported by Grant Grundler <grundler@parisc-linux.org>
+ * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
+ */
+UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
+ "HP",
+ "PhotoSmart R707",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
+
+UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999,
+ "Adaptec",
+ "USBConnect 2000",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
+ * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
+ * for USB floppies that need the SINGLE_LUN enforcement.
+ */
+UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999,
+ "NEC",
+ "NEC USB UF000x",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
+UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
+ "VIA Technologies Inc.",
+ "USB 2.0 Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Deduced by Jonathan Woithe <jwoithe@just42.net>
+ * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
+ * always fails and confuses drive.
+ */
+UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
+ "Buffalo",
+ "DUB-P40G HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
+UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100,
+ "Samsung Info. Systems America, Inc.",
+ "MP3 Player",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Orgad Shaneh <orgads@gmail.com> */
+UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100,
+ "Samsung", "MP3 Player",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Christian Leber <christian@leber.de> */
+UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100,
+ "TrekStor",
+ "i.Beat 115 2.0",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
+
+/* Reported by Stefan Werner <dustbln@gmx.de> */
+UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
+ "TrekStor",
+ "i.Beat Joy 2.0",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
+UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
+ "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610,
+ "Nokia",
+ "Nokia 6288",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Mario Rettig <mariorettig@web.de> */
+UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
+ "Nokia",
+ "Nokia 3250",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by <honkkis@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100,
+ "Nokia",
+ "E70",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Jon Hart <Jon.Hart@web.de> */
+UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
+ "Nokia",
+ "E60",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
+ "Nokia",
+ "N91",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Jiri Slaby <jirislaby@gmail.com> and
+ * Rene C. Castberg <Rene@Castberg.org> */
+UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100,
+ "Nokia",
+ "N80",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
+UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100,
+ "Nokia",
+ "E61",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Bardur Arantsson <bardur@scientician.net> */
+UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610,
+ "Nokia",
+ "6131",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
+UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
+ "Nokia",
+ "Nokia 6233",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Alex Corcoles <alex@corcoles.net> */
+UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
+ "Nokia",
+ "6234",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Daniele Forsi <dforsi@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x04b9, 0x0350, 0x0350,
+ "Nokia",
+ "5300",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/* Patch submitted by Victor A. Santos <victoraur.santos@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x05af, 0x0742, 0x0742,
+ "Nokia",
+ "305",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64),
+
+/* Patch submitted by Mikhail Zolotaryov <lebon@lebon.org.ua> */
+UNUSUAL_DEV( 0x0421, 0x06aa, 0x1110, 0x1110,
+ "Nokia",
+ "502",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+#ifdef NO_SDDR09
+UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
+ "Microtech",
+ "CameraMate",
+ USB_SC_SCSI, USB_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
+#endif
+
+/* Patch submitted by Daniel Drake <dsd@gentoo.org>
+ * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
+UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
+ "Neuros Audio",
+ "USB 2.0 HD 2.5",
+ USB_SC_DEVICE, USB_PR_BULK, NULL,
+ US_FL_NEED_OVERRIDE ),
+
+/*
+ * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
+ * The key does not actually break, but it returns zero sense which
+ * makes our SCSI stack to print confusing messages.
+ */
+UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
+ "USBest Technology", /* sold by Transcend */
+ "USB Mass Storage Device",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
+/*
+* Bohdan Linda <bohdan.linda@gmail.com>
+* 1GB USB sticks MyFlash High Speed. I have restricted
+* the revision to my model only
+*/
+UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
+ "USB 2.0",
+ "Flash Disk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE ),
+
+/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+ * Obviously the PROM has not been customized by the VAR;
+ * the Vendor and Product string descriptors are:
+ * Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
+ * Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
+ */
+UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
+ "Mitac",
+ "GPS",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/*
+ * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
+ * Reported by Pete Zaitcev <zaitcev@redhat.com>
+ * This device chokes on both version of MODE SENSE which we have, so
+ * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
+ */
+UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100,
+ "AMI",
+ "Virtual Floppy",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT),
+
+/* Patch submitted by Philipp Friedrich <philipp@void.at> */
+UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
+ "Kyocera",
+ "Finecam S3x",
+ USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
+
+/* Patch submitted by Philipp Friedrich <philipp@void.at> */
+UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100,
+ "Kyocera",
+ "Finecam S4",
+ USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
+
+/* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
+UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100,
+ "Kyocera",
+ "Finecam S5",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+
+/* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */
+UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100,
+ "Kyocera",
+ "CONTAX SL300R T*",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
+
+/* Reported by Paul Stewart <stewart@wetlogic.net>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
+ "Hitachi",
+ "DVD-CAM DZ-MV100A Camcorder",
+ USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN),
+
+/* BENQ DC5330
+ * Reported by Manuel Fombuena <mfombuena@ya.com> and
+ * Frank Copeland <fjc@thingy.apana.org.au> */
+UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "300_CAMERA",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Patch for Nikon coolpix 2000
+ * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
+UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
+ "NIKON",
+ "NIKON DSC E2000",
+ USB_SC_DEVICE, USB_PR_DEVICE,NULL,
+ US_FL_NOT_LOCKABLE ),
+
+/* Reported by Doug Maxey (dwm@austin.ibm.com) */
+UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
+ "IBM",
+ "IBM RSA2",
+ USB_SC_DEVICE, USB_PR_CB, NULL,
+ US_FL_MAX_SECTORS_MIN),
+
+/* Reported by Simon Levitt <simon@whattf.com>
+ * This entry needs Sub and Proto fields */
+UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
+ "Epson",
+ "875DC Storage",
+ USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
+
+/* Reported by Khalid Aziz <khalid@gonehiking.org>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
+ "Epson",
+ "785EPX Storage",
+ USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
+
+/* Not sure who reported this originally but
+ * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
+ * flag be added */
+UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
+ "Fujifilm",
+ "FinePix 1400Zoom",
+ USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
+
+/* Reported by Ondrej Zary <linux@rainbow-software.org>
+ * The device reports one sector more and breaks when that sector is accessed
+ */
+UNUSUAL_DEV( 0x04ce, 0x0002, 0x026c, 0x026c,
+ "ScanLogic",
+ "SL11R-IDE",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+/* Reported by Kriston Fincher <kriston@airmail.net>
+ * Patch submitted by Sean Millichamp <sean@bruenor.org>
+ * This is to support the Panasonic PalmCam PV-SD4090
+ * This entry is needed because the device reports Sub=ff
+ */
+UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200,
+ "Panasonic",
+ "LS-120 Camera",
+ USB_SC_UFI, USB_PR_DEVICE, NULL, 0),
+
+/* From Yukihiro Nakai, via zaitcev@yahoo.com.
+ * This is needed for CB instead of CBI */
+UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000,
+ "Sharp CE-CW05",
+ "CD-R/RW Drive",
+ USB_SC_8070, USB_PR_CB, NULL, 0),
+
+/* Reported by Adriaan Penning <a.penning@luon.net> */
+UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
+ "Panasonic",
+ "DMC-LCx Camera",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+
+/* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
+UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
+ "LEICA",
+ "D-LUX Camera",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+
+/* Most of the following entries were developed with the help of
+ * Shuttle/SCM directly.
+ */
+UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
+ "Matshita",
+ "LS-120",
+ USB_SC_8020, USB_PR_CB, NULL, 0),
+
+UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
+ "Shuttle",
+ "eUSCSI Bridge",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+#ifdef NO_SDDR09
+UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
+ "SCM Microsystems",
+ "eUSB CompactFlash Adapter",
+ USB_SC_SCSI, USB_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
+#endif
+
+/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
+UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
+ "SCM Microsystems Inc.",
+ "eUSB MMC Adapter",
+ USB_SC_SCSI, USB_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
+
+/* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
+UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
+ "Shuttle",
+ "eUSB MMC Adapter",
+ USB_SC_SCSI, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
+ "Sony",
+ "Hifd",
+ USB_SC_SCSI, USB_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
+ "Shuttle",
+ "eUSB ATA/ATAPI Adapter",
+ USB_SC_8020, USB_PR_CB, NULL, 0),
+
+UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
+ "Shuttle",
+ "eUSB CompactFlash Adapter",
+ USB_SC_8020, USB_PR_CB, NULL, 0),
+
+UNUSUAL_DEV( 0x04e6, 0x000b, 0x0100, 0x0100,
+ "Shuttle",
+ "eUSCSI Bridge",
+ USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x04e6, 0x000c, 0x0100, 0x0100,
+ "Shuttle",
+ "eUSCSI Bridge",
+ USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x04e6, 0x000f, 0x0000, 0x9999,
+ "SCM Microsystems",
+ "eUSB SCSI Adapter (Bus Powered)",
+ USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
+ "Shuttle",
+ "CD-RW Device",
+ USB_SC_8020, USB_PR_CB, NULL, 0),
+
+/* Reported by Dmitry Khlystov <adminimus@gmail.com> */
+UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
+ "Samsung",
+ "YP-U3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64),
+
+/* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */
+UNUSUAL_DEV( 0x04e8, 0x5122, 0x0000, 0x9999,
+ "Samsung",
+ "YP-CP3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
+
+/* Added by Dmitry Artamonow <mad_soft@inbox.ru> */
+UNUSUAL_DEV( 0x04e8, 0x5136, 0x0000, 0x9999,
+ "Samsung",
+ "YP-Z3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64),
+
+/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
+ * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
+ */
+UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
+ "Kobian Mercury",
+ "Binocam DCB-132",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BULK32),
+
+/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
+UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
+ "Belkin",
+ "USB SCSI Adaptor",
+ USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+/* Iomega Clik! Drive
+ * Reported by David Chatenay <dchatenay@hotmail.com>
+ * The reason this is needed is not fully known.
+ */
+UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
+ "Iomega",
+ "USB Clik! 40",
+ USB_SC_8070, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Added by Alan Stern <stern@rowland.harvard.edu> */
+COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
+ "Linux",
+ "File-backed Storage Gadget",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_CAPACITY_OK ),
+
+/* Yakumo Mega Image 37
+ * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
+UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "300_CAMERA",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Another Yakumo camera.
+ * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
+UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "300_CAMERA",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
+UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "300_CAMERA",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Yakumo Mega Image 47
+ * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
+UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "400_CAMERA",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Paul Ortyl <ortylp@3miasto.net>
+ * Note that it's similar to the device above, only different prodID */
+UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "400_CAMERA",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
+ "Sony",
+ "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
+ USB_SC_SCSI, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
+
+/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
+ "Sony",
+ "DSC-T1/T5/H5",
+ USB_SC_8070, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+
+/* Reported by wim@geeks.nl */
+UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
+ "Sony",
+ "Memorystick NW-MS7",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
+UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000,
+ "Sony",
+ "USB Floppy Drive",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
+ "Sony",
+ "Memorystick MSAC-US1",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Klaus Mueller <k.mueller@intershop.de> */
+UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
+ "Sony",
+ "Handycam",
+ USB_SC_SCSI, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
+UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
+ "Sony",
+ "Handycam HC-85",
+ USB_SC_UFI, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
+ "Sony",
+ "Memorystick MSC-U01N",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Michal Mlotek <mlotek@foobar.pl> */
+UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999,
+ "Sony",
+ "PEG N760c Memorystick",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999,
+ "Sony",
+ "Memorystick MSC-U03",
+ USB_SC_UFI, USB_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Nathan Babb <nathan@lexi.com> */
+UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
+ "Sony",
+ "PEG Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
+UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
+ "Sony",
+ "PEG Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
+UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
+ "Sony",
+ "PEG Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Submitted by Ren Bigcren <bigcren.ren@sonymobile.com> */
+UNUSUAL_DEV( 0x054c, 0x02a5, 0x0100, 0x0100,
+ "Sony Corp.",
+ "MicroVault Flash Drive",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_READ_CAPACITY_16 ),
+
+/* floppy reports multiple luns */
+UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210,
+ "SAMSUNG",
+ "SFD-321U [FW 0C]",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* We keep this entry to force the transport; firmware 3.00 and later is ok. */
+UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
+ "Y-E Data",
+ "Flashbuster-U",
+ USB_SC_DEVICE, USB_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
+
+/* Reported by Johann Cardon <johann.cardon@free.fr>
+ * This entry is needed only because the device reports
+ * bInterfaceClass = 0xff (vendor-specific)
+ */
+UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
+ "Y-E Data",
+ "Silicon Media R/W",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
+
+/* Reported by RTE <raszilki@yandex.ru> */
+UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141,
+ "JetFlash",
+ "TS1GJF2A/120",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/* Fabrizio Fellini <fello@libero.it> */
+UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
+ "Fujifilm",
+ "Digital Camera EX-20 DSC",
+ USB_SC_8070, USB_PR_DEVICE, NULL, 0 ),
+
+/* Reported by Andre Welter <a.r.welter@gmx.de>
+ * This antique device predates the release of the Bulk-only Transport
+ * spec, and if it gets a Get-Max-LUN then it requires the host to do a
+ * Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent
+ * us from sending the request.
+ */
+UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100,
+ "Iomega",
+ "ZIP 100",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV( 0x059b, 0x0040, 0x0100, 0x0100,
+ "Iomega",
+ "Jaz USB Adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Reported by <Hendryk.Pfeiffer@gmx.de> */
+UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
+ "LaCie",
+ "DVD+-RW",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_GO_SLOW ),
+
+/* Reported by Christian Schaller <cschalle@redhat.com> */
+UNUSUAL_DEV( 0x059f, 0x0651, 0x0000, 0x0000,
+ "LaCie",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT ),
+
+/* Submitted by Joel Bourquard <numlock@freesurf.ch>
+ * Some versions of this device need the SubClass and Protocol overrides
+ * while others don't.
+ */
+UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
+ "In-System",
+ "PyroGate External CD-ROM Enclosure (FCD-523)",
+ USB_SC_SCSI, USB_PR_BULK, NULL,
+ US_FL_NEED_OVERRIDE ),
+
+/* Submitted by Sven Anderson <sven-linux@anderson.de>
+ * There are at least four ProductIDs used for iPods, so I added 0x1202 and
+ * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
+ * to change with firmware updates, I changed the range to maximum for all
+ * iPod entries.
+ */
+UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
+ "Apple",
+ "iPod",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by Avi Kivity <avi@argo.co.il> */
+UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
+ "Apple",
+ "iPod",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
+ "Apple",
+ "iPod",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+
+UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
+ "Apple",
+ "iPod",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/*
+ * Reported by Tyson Vinson <lornoss@gmail.com>
+ * This particular productId is the iPod Nano
+ */
+UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
+ "Apple",
+ "iPod",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by Dan Williams <dcbw@redhat.com>
+ * Option N.V. mobile broadband modems
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+
+/* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */
+UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999,
+ "Option N.V.",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
+ 0),
+
+/* Reported by Blake Matheny <bmatheny@purdue.edu> */
+UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
+ "Lexar",
+ "USB CF Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* The following two entries are for a Genesys USB to IDE
+ * converter chip, but it changes its ProductId depending
+ * on whether or not a disk or an optical device is enclosed
+ * They were originally reported by Alexander Oltu
+ * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
+ * respectively.
+ *
+ * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
+ * <phil@ipom.com> as these flags were made and hard-coded
+ * special-cases were pulled from scsiglue.c.
+ */
+UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
+ "Genesys Logic",
+ "USB to IDE Optical",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
+
+UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
+ "Genesys Logic",
+ "USB to IDE Disk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Ben Efros <ben@pc-doctor.com> */
+UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
+ "Genesys Logic",
+ "USB to SATA",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE ),
+
+/* Reported by Hanno Boeck <hanno@gmx.de>
+ * Taken from the Lycoris Kernel */
+UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
+ "Vivitar",
+ "Vivicam 35Xx",
+ USB_SC_SCSI, USB_PR_BULK, NULL,
+ US_FL_FIX_INQUIRY ),
+
+UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
+ "TEAC",
+ "Floppy Drive",
+ USB_SC_UFI, USB_PR_CB, NULL, 0 ),
+
+/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
+UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
+ "SigmaTel",
+ "USBMSC Audio Player",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by Daniel Kukula <daniel.kuku@gmail.com> */
+UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100,
+ "Prolific Technology, Inc.",
+ "Prolific Storage Gadget",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BAD_SENSE ),
+
+/* Reported by Rogerio Brito <rbrito@ime.usp.br> */
+UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
+ "Prolific Technology, Inc.",
+ "Mass Storage Device",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE ),
+
+/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
+/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
+ * Thomas Bartosik <tbartdev@gmx-topmail.de> */
+UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
+ "Prolific Technology Inc.",
+ "Mass Storage Device",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
+
+/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
+UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101,
+ "Prolific Technology Inc.",
+ "ATAPI-6 Bridge Controller",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
+
+/* Submitted by Benny Sjostrand <benny@hostmobility.com> */
+UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
+ "Minolta",
+ "Dimage F300",
+ USB_SC_SCSI, USB_PR_BULK, NULL, 0 ),
+
+/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
+UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001,
+ "Minolta",
+ "DIMAGE E223",
+ USB_SC_SCSI, USB_PR_DEVICE, NULL, 0 ),
+
+UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
+ "Hagiwara",
+ "Flashgate",
+ USB_SC_SCSI, USB_PR_BULK, NULL, 0 ),
+
+/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
+UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
+ "Thomson Multimedia Inc.",
+ "RCA RD1080 MP3 Player",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+UNUSUAL_DEV( 0x06ca, 0x2003, 0x0100, 0x0100,
+ "Newer Technology",
+ "uSCSI",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
+UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
+ "RockChip",
+ "MP3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 |
+ US_FL_NO_READ_CAPACITY_16),
+
+/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+ * Support the following product :
+ * "Dane-Elec MediaTouch"
+ */
+UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000,
+ "RockChip",
+ "MTP",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
+/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
+ * This USB MP3/AVI player device fails and disconnects if more than 128
+ * sectors (64kB) are read/written in a single command, and may be present
+ * at least in the following products:
+ * "Magnex Digital Video Panel DVP 1800"
+ * "MP4 AIGO 4GB SLOT SD"
+ * "Teclast TL-C260 MP3"
+ * "i.Meizu PMP MP3/MP4"
+ * "Speed MV8 MP4 Audio Player"
+ */
+UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100,
+ "RockChip",
+ "ROCK MP3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64),
+
+/* Reported by Olivier Blondeau <zeitoun@gmail.com> */
+UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100,
+ "ATMEL",
+ "SND1 Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE),
+
+/* Submitted by Roman Hodek <roman@hodek.net> */
+UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
+ "Sandisk",
+ "ImageMate SDDR-05a",
+ USB_SC_SCSI, USB_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009,
+ "SanDisk Corporation",
+ "ImageMate CompactFlash USB",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
+ "Sandisk",
+ "ImageMate SDDR-12",
+ USB_SC_SCSI, USB_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Reported by Eero Volotinen <eero@ping-viini.org> */
+UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
+ "Freecom Technologies",
+ "FHD-Classic",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
+ "Microtech",
+ "USB-SCSI-DB25",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
+ "Microtech",
+ "USB-SCSI-HD50",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+#ifdef NO_SDDR09
+UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
+ "Microtech",
+ "CameraMate",
+ USB_SC_SCSI, USB_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
+#endif
+
+/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
+ * Only revision 1.13 tested (same for all of the above devices,
+ * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
+ * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
+ * See also http://martin.wilck.bei.t-online.de/#kecf .
+ */
+UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
+ "Datafab",
+ "KECF-USB",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
+
+/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+ * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
+ */
+UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
+ "Simple Tech/Datafab",
+ "CF+SM Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
+
+/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
+ * to the USB storage specification in two ways:
+ * - They tell us they are using transport protocol CBI. In reality they
+ * are using transport protocol CB.
+ * - They don't like the INQUIRY command. So we must handle this command
+ * of the SCSI layer ourselves.
+ * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
+ * bInterfaceProtocol=0x00 (USB_PR_CBI) while others have 0x01 (USB_PR_CB).
+ * So don't remove the USB_PR_CB override!
+ * - Cameras with bcdDevice=0x9009 require the USB_SC_8070 override.
+ */
+UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
+ "Casio",
+ "QV DigitalCamera",
+ USB_SC_8070, USB_PR_CB, NULL,
+ US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
+
+/* Submitted by Oleksandr Chumachenko <ledest@gmail.com> */
+UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100,
+ "Casio",
+ "EX-N1 DigitalCamera",
+ USB_SC_8070, USB_PR_DEVICE, NULL, 0),
+
+/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
+UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
+ "Samsung",
+ "Digimax 410",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY),
+
+/* Reported by Luciano Rocha <luciano@eurotux.com> */
+UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
+ "Argosy",
+ "Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+/* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
+ "Argosy",
+ "Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
+ "Argosy",
+ "Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+/* Supplied with some Castlewood ORB removable drives */
+UNUSUAL_DEV( 0x084b, 0xa001, 0x0000, 0x9999,
+ "Castlewood Systems",
+ "USB to SCSI cable",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Flag will support Bulk devices which use a standards-violating 32-byte
+ * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
+ * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
+ */
+
+UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
+ "Grandtech",
+ "DC2MEGA",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BULK32),
+
+/* Reported by <ttkspam@free.fr>
+ * The device reports a vendor-specific device class, requiring an
+ * explicit vendor/product match.
+ */
+UNUSUAL_DEV( 0x0851, 0x1542, 0x0002, 0x0002,
+ "MagicPixel",
+ "FW_Omega2",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
+
+/* Andrew Lunn <andrew@lunn.ch>
+ * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
+ * on LUN 4.
+ * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
+*/
+UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
+ "PanDigital",
+ "Photo Frame",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE),
+
+UNUSUAL_DEV( 0x085a, 0x0026, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB-SCSI (Mac USB Dock)",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x085a, 0x0028, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+/* Submitted by Jan De Luyck <lkml@kcore.org> */
+UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
+ "CITIZEN",
+ "X1DE-USB",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN),
+
+/* Submitted by Dylan Taft <d13f00l@gmail.com>
+ * US_FL_IGNORE_RESIDUE Needed
+ */
+UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
+ "AIPTEK",
+ "Aiptek USB Keychain MP3 Player",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE),
+
+/* Entry needed for flags. Moreover, all devices with this ID use
+ * bulk-only transport, but _some_ falsely report Control/Bulk instead.
+ * One example is "Trumpion Digital Research MYMP3".
+ * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
+ */
+UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
+ "Trumpion",
+ "t33520 USB Flash Card Controller",
+ USB_SC_DEVICE, USB_PR_BULK, NULL,
+ US_FL_NEED_OVERRIDE ),
+
+/* Reported by Filippo Bardelli <filibard@libero.it>
+ * The device reports a subclass of RBC, which is wrong.
+ */
+UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
+ "Trumpion Microelectronics, Inc.",
+ "33520 USB Digital Voice Recorder",
+ USB_SC_UFI, USB_PR_DEVICE, NULL,
+ 0),
+
+/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
+UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
+ "Trumpion",
+ "MP3 player",
+ USB_SC_RBC, USB_PR_BULK, NULL,
+ 0 ),
+
+/* aeb */
+UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
+ "Feiya",
+ "5-in-1 Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+ * This card reader returns "Illegal Request, Logical Block Address
+ * Out of Range" for the first READ(10) after a new card is inserted.
+ */
+UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100,
+ "Feiya",
+ "SD/SDHC Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_INITIAL_READ10 ),
+
+/* This Pentax still camera is not conformant
+ * to the USB storage specification: -
+ * - It does not like the INQUIRY command. So we must handle this command
+ * of the SCSI layer ourselves.
+ * Tested on Rev. 10.00 (0x1000)
+ * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
+ */
+UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
+ "Pentax",
+ "Optio 2/3/400",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* These are virtual windows driver CDs, which the zd1211rw driver
+ * automatically converts into WLAN devices. */
+UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
+ "ZyXEL",
+ "G-220F USB-WLAN Install",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE ),
+
+UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
+ "SiteCom",
+ "WL-117 USB-WLAN Install",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE ),
+
+/* Reported by Dan Williams <dcbw@redhat.com>
+ * Option N.V. mobile broadband modems
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+
+/* iCON 225 */
+UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999,
+ "Option N.V.",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
+ 0),
+
+/* Reported by F. Aben <f.aben@option.com>
+ * This device (wrongly) has a vendor-specific device descriptor.
+ * The entry is needed so usb-storage can bind to it's mass-storage
+ * interface as an interface driver */
+UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
+ "Option",
+ "GI 0401 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+/* Reported by Jan Dumon <j.dumon@option.com>
+ * These devices (wrongly) have a vendor-specific device descriptor.
+ * These entries are needed so usb-storage can bind to their mass-storage
+ * interface as an interface driver */
+UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
+ "Option",
+ "GI 0431 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000,
+ "Option",
+ "GI 0451 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000,
+ "Option",
+ "GI 0451 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000,
+ "Option",
+ "GI 0452 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000,
+ "Option",
+ "GI 0461 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000,
+ "Option",
+ "GI 0461 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000,
+ "Option",
+ "GI 033x SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000,
+ "Option",
+ "GI 033x SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000,
+ "Option",
+ "GI 033x SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000,
+ "Option",
+ "GI 070x SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000,
+ "Option",
+ "GI 1505 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000,
+ "Option",
+ "GI 1509 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000,
+ "Option",
+ "GI 1515 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000,
+ "Option",
+ "GI 1215 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000,
+ "Option",
+ "GI 1505 SD-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+/* Reported by Namjae Jeon <namjae.jeon@samsung.com> */
+UNUSUAL_DEV(0x0bc2, 0x2300, 0x0000, 0x9999,
+ "Seagate",
+ "Portable HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE),
+
+/* Reported by Ben Efros <ben@pc-doctor.com> */
+UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
+ "Seagate",
+ "FreeAgent Pro",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE ),
+
+UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999,
+ "Maxtor",
+ "USB to SATA",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE),
+
+/*
+ * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
+ * The device blatantly ignores LUN and returns 1 in GetMaxLUN.
+ */
+UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
+ "Unknown",
+ "Unknown",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Joris Struyve <joris@struyve.be> */
+UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
+ "Medion",
+ "MD 7425",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY),
+
+/*
+ * Entry for Jenoptik JD 5200z3
+ *
+ * email: car.busse@gmx.de
+ */
+UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200,
+ "Jenoptik",
+ "JD 5200 z3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+
+/* Reported by Jason Johnston <killean@shaw.ca> */
+UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000,
+ "Macpower Technology Co.LTD.",
+ "USB 2.0 3.5\" DEVICE",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+/* Reported by Lubomir Blaha <tritol@trilogic.cz>
+ * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
+ * works for me. Can anybody correct these values? (I able to test corrected
+ * version.)
+ */
+UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
+ "Netac",
+ "USB-CF-Card",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Reported by Edward Chapman (taken from linux-usb mailing list)
+ Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
+UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
+ "Netac",
+ "USB Flash Disk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+
+/* Patch by Stephan Walter <stephan.walter@epfl.ch>
+ * I don't know why, but it works... */
+UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
+ "WINWARD",
+ "Music Disk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Ian McConnell <ian at emit.demon.co.uk> */
+UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012,
+ "PNP_MP3",
+ "PNP_MP3 PLAYER",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
+UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
+ "Cowon Systems",
+ "iAUDIO M5",
+ USB_SC_DEVICE, USB_PR_BULK, NULL,
+ US_FL_NEED_OVERRIDE ),
+
+/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
+UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
+ "USB",
+ "Solid state disk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Submitted by Daniel Drake <dsd@gentoo.org>
+ * Reported by dayul on the Gentoo Forums */
+UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
+ "Ours Technology",
+ "Flash Disk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
+UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
+ "USB",
+ "Flash Disk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20 */
+UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
+ "Typhoon",
+ "My DJ 1820",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+
+/* Patch by Leonid Petrov mail at lpetrov.net
+ * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
+ * http://www.qbik.ch/usb/devices/showdev.php?id=1705
+ * Updated to 103 device by MJ Ray mjr at phonecoop.coop
+ */
+UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100,
+ "Oracom Co., Ltd",
+ "ORC-200M",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* David Kuehling <dvdkhlng@gmx.de>:
+ * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI
+ * errors when trying to write.
+ */
+UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
+ "C-MEX",
+ "A-VOX",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Submitted by Nick Holloway */
+UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
+ "VTech",
+ "Kidizoom",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> */
+UNUSUAL_DEV( 0x0fca, 0x8004, 0x0201, 0x0201,
+ "Research In Motion",
+ "BlackBerry Bold 9000",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Michael Stattmann <michael@stattmann.com> */
+UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "V800-Vodafone 802",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT ),
+
+/* Reported by The Solutor <thesolutor@gmail.com> */
+UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "MD400",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE),
+
+/* Reported by Jan Mate <mate@fiit.stuba.sk>
+ * and by Soeren Sonnenburg <kernel@nn7.de> */
+UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "P990i",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
+UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "M600i",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Ricardo Barberis <ricardo@dattatec.com> */
+UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "P1i",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
+ * Tested on hardware version 1.10.
+ * Entry is needed only for the initializer function override.
+ * Devices with bcd > 110 seem to not need it while those
+ * with bcd < 110 appear to need it.
+ */
+UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110,
+ "Desknote",
+ "UCR-61S2B",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_ucr61s2b_init,
+ 0 ),
+
+UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999,
+ "Western Digital",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE),
+
+/* Reported by Namjae Jeon <namjae.jeon@samsung.com> */
+UNUSUAL_DEV(0x1058, 0x070a, 0x0000, 0x9999,
+ "Western Digital",
+ "My Passport HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE),
+
+/* Reported by Fabio Venturi <f.venturi@tdnet.it>
+ * The device reports a vendor-specific bDeviceClass.
+ */
+UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
+ "Actions Semiconductor",
+ "Mtp device",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0),
+
+/* Reported by Pascal Terjan <pterjan@mandriva.com>
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
+ "D-Link",
+ "USB Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
+
+/* Reported by Kevin Lloyd <linux@sierrawireless.com>
+ * Entry is needed for the initializer function override,
+ * which instructs the device to load as a modem
+ * device.
+ */
+UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999,
+ "Sierra Wireless",
+ "USB MMC Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init,
+ 0),
+
+/* Reported by Jaco Kroon <jaco@kroon.co.za>
+ * The usb-storage module found on the Digitech GNX4 (and supposedly other
+ * devices) misbehaves and causes a bunch of invalid I/O errors.
+ */
+UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
+ "Digitech HMG",
+ "DigiTech Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by fangxiaozhi <huananhu@huawei.com>
+ * This brings the HUAWEI data card devices into multi-port mode
+ */
+UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+
+/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
+UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
+ "Minolta",
+ "Dimage Z10",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ 0 ),
+
+/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
+UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
+ "SWISSBIT",
+ "Black Silver",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Qinglin Ye <yestyle@gmail.com> */
+UNUSUAL_DEV( 0x13fe, 0x3600, 0x0100, 0x0100,
+ "Kingston",
+ "DT 101 G2",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BULK_IGNORE_TAG ),
+
+/* Reported by Francesco Foresti <frafore@tiscali.it> */
+UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
+ "Super Top",
+ "IDE DEVICE",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Michael Büsch <m@bues.ch> */
+UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0114,
+ "JMicron",
+ "USB to ATA/ATAPI Bridge",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA ),
+
+/* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
+ * JMicron responds to USN and several other SCSI ioctls with a
+ * residue that causes subsequent I/O requests to fail. */
+UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
+ "JMicron",
+ "USB to ATA/ATAPI Bridge",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+
+/* Reported by Dmitry Nezhevenko <dion@dion.org.ua> */
+UNUSUAL_DEV( 0x152d, 0x2566, 0x0114, 0x0114,
+ "JMicron",
+ "USB to ATA/ATAPI Bridge",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA ),
+
+/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+ * and Mac USB Dock USB-SCSI */
+UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133,
+ "Entrega Technologies",
+ "USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+/* Reported by Robert Schedel <r.schedel@yahoo.de>
+ * Note: this is a 'super top' device like the above 14cd/6600 device */
+UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
+ "Teac",
+ "HD-35PUK-B",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Oliver Neukum <oneukum@suse.com> */
+UNUSUAL_DEV( 0x174c, 0x55aa, 0x0100, 0x0100,
+ "ASMedia",
+ "AS2105",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NEEDS_CAP16),
+
+/* Reported by Jesse Feddema <jdfeddema@gmail.com> */
+UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000,
+ "Yarvik",
+ "PMP400",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
+UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999,
+ "Ariston Technologies",
+ "iConnect USB to SCSI adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+/* Reported by Hans de Goede <hdegoede@redhat.com>
+ * These Appotech controllers are found in Picture Frames, they provide a
+ * (buggy) emulation of a cdrom drive which contains the windows software
+ * Uploading of pictures happens over the corresponding /dev/sg device. */
+UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000,
+ "BUILDWIN",
+ "Photo Frame",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BAD_SENSE ),
+UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000,
+ "BUILDWIN",
+ "Photo Frame",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BAD_SENSE ),
+UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
+ "BUILDWIN",
+ "Photo Frame",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_READ_DISC_INFO ),
+
+/* Reported by Sven Geggus <sven-usbst@geggus.net>
+ * This encrypted pen drive returns bogus data for the initial READ(10).
+ */
+UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200,
+ "Corsair",
+ "Padlock v2",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_INITIAL_READ10 ),
+
+/* Patch by Richard Schütz <r.schtz@t-online.de>
+ * This external hard drive enclosure uses a JMicron chip which
+ * needs the US_FL_IGNORE_RESIDUE flag to work properly. */
+UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000,
+ "TrekStor GmbH & Co. KG",
+ "DataStation maxi g.u",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+
+/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */
+UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
+ "Coby Electronics",
+ "MP3 Player",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
+/* Supplied with some Castlewood ORB removable drives */
+UNUSUAL_DEV( 0x2027, 0xa001, 0x0000, 0x9999,
+ "Double-H Technology",
+ "USB to SCSI Intelligent Cable",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
+ "ST",
+ "2A",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+ * and Renato Perini <rperini@email.it>
+ */
+UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
+ "Motorola",
+ "RAZR V3x",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
+/*
+ * Patch by Constantin Baranov <const@tltsu.ru>
+ * Report by Andreas Koenecke.
+ * Motorola ROKR Z6.
+ */
+UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101,
+ "Motorola",
+ "MSnc.",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
+
+/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
+UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
+ "MPIO",
+ "HS200",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_GO_SLOW ),
+
+/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
+ * Mio Moov 330
+ */
+UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000,
+ "Mitac",
+ "Mio DigiWalker USB Sync",
+ USB_SC_DEVICE,USB_PR_DEVICE,NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
+UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100,
+ "iRiver",
+ "MP3 T10",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Sergey Pinaev <dfo@antex.ru> */
+UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000,
+ "iRiver",
+ "P7K",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
+/*
+ * David Härdeman <david@2gen.com>
+ * The key makes the SCSI stack print confusing (but harmless) messages
+ */
+UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100,
+ "Iomega",
+ "Micro Mini 1GB",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
+/*
+ * Nick Bowler <nbowler@elliptictech.com>
+ * SCSI stack spams (otherwise harmless) error messages.
+ */
+UNUSUAL_DEV( 0xc251, 0x4003, 0x0100, 0x0100,
+ "Keil Software, Inc.",
+ "V2M MotherBoard",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE),
+
+/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
+UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001,
+ "DataStor",
+ "USB4500 FW1.04",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_CAPACITY_HEURISTICS),
+
+/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
+UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
+ "TGE",
+ "Digital MP3 Audio Player",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
+/* Unusual uas devices */
+#if IS_ENABLED(CONFIG_USB_UAS)
+#include "unusual_uas.h"
+#endif
+
+/* Control/Bulk transport for all SubClass values */
+USUAL_DEV(USB_SC_RBC, USB_PR_CB),
+USUAL_DEV(USB_SC_8020, USB_PR_CB),
+USUAL_DEV(USB_SC_QIC, USB_PR_CB),
+USUAL_DEV(USB_SC_UFI, USB_PR_CB),
+USUAL_DEV(USB_SC_8070, USB_PR_CB),
+USUAL_DEV(USB_SC_SCSI, USB_PR_CB),
+
+/* Control/Bulk/Interrupt transport for all SubClass values */
+USUAL_DEV(USB_SC_RBC, USB_PR_CBI),
+USUAL_DEV(USB_SC_8020, USB_PR_CBI),
+USUAL_DEV(USB_SC_QIC, USB_PR_CBI),
+USUAL_DEV(USB_SC_UFI, USB_PR_CBI),
+USUAL_DEV(USB_SC_8070, USB_PR_CBI),
+USUAL_DEV(USB_SC_SCSI, USB_PR_CBI),
+
+/* Bulk-only transport for all SubClass values */
+USUAL_DEV(USB_SC_RBC, USB_PR_BULK),
+USUAL_DEV(USB_SC_8020, USB_PR_BULK),
+USUAL_DEV(USB_SC_QIC, USB_PR_BULK),
+USUAL_DEV(USB_SC_UFI, USB_PR_BULK),
+USUAL_DEV(USB_SC_8070, USB_PR_BULK),
+USUAL_DEV(USB_SC_SCSI, USB_PR_BULK),
diff --git a/drivers/usb/storage/unusual_ene_ub6250.h b/drivers/usb/storage/unusual_ene_ub6250.h
new file mode 100644
index 000000000..5667f5d36
--- /dev/null
+++ b/drivers/usb/storage/unusual_ene_ub6250.h
@@ -0,0 +1,26 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ENE_UB6250) || \
+ defined(CONFIG_USB_STORAGE_ENE_UB6250_MODULE)
+
+UNUSUAL_DEV(0x0cf2, 0x6250, 0x0000, 0x9999,
+ "ENE",
+ "ENE UB6250 reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ENE_UB6250) || ... */
diff --git a/drivers/usb/storage/unusual_freecom.h b/drivers/usb/storage/unusual_freecom.h
new file mode 100644
index 000000000..59a261155
--- /dev/null
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -0,0 +1,26 @@
+/* Unusual Devices File for the Freecom USB/IDE adaptor
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_FREECOM) || \
+ defined(CONFIG_USB_STORAGE_FREECOM_MODULE)
+
+UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999,
+ "Freecom",
+ "USB-IDE",
+ USB_SC_QIC, USB_PR_FREECOM, init_freecom, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
new file mode 100644
index 000000000..14cca0c48
--- /dev/null
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -0,0 +1,57 @@
+/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ISD200) || \
+ defined(CONFIG_USB_STORAGE_ISD200_MODULE)
+
+UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
+ "Sony",
+ "Portable USB Harddrive V2",
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+ 0),
+
+UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110,
+ "In-System",
+ "USB/IDE Bridge (ATA/ATAPI)",
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+ 0),
+
+UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110,
+ "In-System",
+ "Portable USB Harddrive V2",
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+ 0),
+
+UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110,
+ "In-System",
+ "Portable USB Harddrive V2",
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+ 0),
+
+UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110,
+ "In-System",
+ "USB Storage Adapter V2",
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+ 0),
+
+UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
+ "ATI",
+ "USB Cable 205",
+ USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
+ 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */
diff --git a/drivers/usb/storage/unusual_jumpshot.h b/drivers/usb/storage/unusual_jumpshot.h
new file mode 100644
index 000000000..54be78b5d
--- /dev/null
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -0,0 +1,27 @@
+/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \
+ defined(CONFIG_USB_STORAGE_JUMPSHOT_MODULE)
+
+UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
+ "Lexar",
+ "Jumpshot USB CF Reader",
+ USB_SC_SCSI, USB_PR_JUMPSHOT, NULL,
+ US_FL_NEED_OVERRIDE),
+
+#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */
diff --git a/drivers/usb/storage/unusual_karma.h b/drivers/usb/storage/unusual_karma.h
new file mode 100644
index 000000000..6df03972a
--- /dev/null
+++ b/drivers/usb/storage/unusual_karma.h
@@ -0,0 +1,26 @@
+/* Unusual Devices File for the Rio Karma
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_KARMA) || \
+ defined(CONFIG_USB_STORAGE_KARMA_MODULE)
+
+UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
+ "Rio",
+ "Rio Karma",
+ USB_SC_SCSI, USB_PR_KARMA, rio_karma_init, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
new file mode 100644
index 000000000..0abb819c7
--- /dev/null
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -0,0 +1,36 @@
+/* Unusual Devices File for the Maxtor OneTouch USB hard drive's button
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ONETOUCH) || \
+ defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE)
+
+/* Submitted by: Nick Sillik <n.sillik@temple.edu>
+ * Needed for OneTouch extension to usb-storage
+ */
+UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999,
+ "Maxtor",
+ "OneTouch External Harddrive",
+ USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
+ 0),
+
+UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999,
+ "Maxtor",
+ "OneTouch External Harddrive",
+ USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
+ 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
new file mode 100644
index 000000000..e41f50c95
--- /dev/null
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -0,0 +1,41 @@
+/* Driver for Realtek RTS51xx USB card reader
+ *
+ * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * wwang (wei_wang@realsil.com.cn)
+ * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#if defined(CONFIG_USB_STORAGE_REALTEK) || \
+ defined(CONFIG_USB_STORAGE_REALTEK_MODULE)
+
+UNUSUAL_DEV(0x0bda, 0x0138, 0x0000, 0x9999,
+ "Realtek",
+ "USB Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0158, 0x0000, 0x9999,
+ "Realtek",
+ "USB Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0159, 0x0000, 0x9999,
+ "Realtek",
+ "USB Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
new file mode 100644
index 000000000..59a7e37b6
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -0,0 +1,56 @@
+/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR09) || \
+ defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+
+UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
+ "Microtech",
+ "CameraMate (DPCM_USB)",
+ USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
+
+UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
+ "Sandisk",
+ "ImageMate SDDR09",
+ USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+ 0),
+
+/* This entry is from Andries.Brouwer@cwi.nl */
+UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
+ "SCM Microsystems",
+ "eUSB SmartMedia / CompactFlash Adapter",
+ USB_SC_SCSI, USB_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
+ 0),
+
+UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
+ "Olympus",
+ "Camedia MAUSB-2",
+ USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+ 0),
+
+UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
+ "Sandisk",
+ "ImageMate SDDR-09",
+ USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+ 0),
+
+UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
+ "Microtech",
+ "CameraMate (DPCM_USB)",
+ USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
new file mode 100644
index 000000000..fcb7e12c5
--- /dev/null
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -0,0 +1,44 @@
+/* Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_SDDR55) || \
+ defined(CONFIG_USB_STORAGE_SDDR55_MODULE)
+
+/* Contributed by Peter Waechtler */
+UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
+ "Datafab",
+ "MDSM-B reader",
+ USB_SC_SCSI, USB_PR_SDDR55, NULL,
+ US_FL_FIX_INQUIRY),
+
+/* SM part - aeb <Andries.Brouwer@cwi.nl> */
+UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
+ "Datafab Systems, Inc.",
+ "USB to CF + SM Combo (LC1)",
+ USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+ "Acomdata",
+ "SM",
+ USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
+
+UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
+ "Sandisk",
+ "ImageMate SDDR55",
+ USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
new file mode 100644
index 000000000..c85ea5300
--- /dev/null
+++ b/drivers/usb/storage/unusual_uas.h
@@ -0,0 +1,163 @@
+/* Driver for USB Attached SCSI devices - Unusual Devices File
+ *
+ * (c) 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the same file for the usb-storage driver, which is:
+ * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * IMPORTANT NOTE: This file must be included in another file which defines
+ * a UNUSUAL_DEV macro before this file is included.
+ */
+
+/*
+ * If you edit this file, please try to keep it sorted first by VendorID,
+ * then by ProductID.
+ *
+ * If you want to add an entry for this file, be sure to include the
+ * following information:
+ * - a patch that adds the entry for your device, including your
+ * email address right above the entry (plus maybe a brief
+ * explanation of the reason for the entry),
+ * - lsusb -v output for the device
+ * Send your submission to Hans de Goede <hdegoede@redhat.com>
+ * and don't forget to CC: the USB development list <linux-usb@vger.kernel.org>
+ */
+
+/*
+ * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
+ * commands in UAS mode. Observed with the 1.28 firmware; are there others?
+ */
+UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128,
+ "Apricorn",
+ "",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
+/* https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
+UNUSUAL_DEV(0x0bc2, 0x2312, 0x0000, 0x9999,
+ "Seagate",
+ "Expansion Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999,
+ "Seagate",
+ "Expansion Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999,
+ "Seagate",
+ "Expansion Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Bogdan Mihalcea <bogdan.mihalcea@infim.ro> */
+UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999,
+ "Seagate",
+ "Backup Plus",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Marcin ZajÄ…czkowski <mszpak@wp.pl> */
+UNUSUAL_DEV(0x0bc2, 0xa013, 0x0000, 0x9999,
+ "Seagate",
+ "Backup Plus",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x0bc2, 0xa0a4, 0x0000, 0x9999,
+ "Seagate",
+ "Backup Plus Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
+ "Seagate",
+ "Backup+ BK",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999,
+ "Seagate",
+ "Backup+ BK",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: G. Richard Bellamy <rbellamy@pteradigm.com> */
+UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999,
+ "Seagate",
+ "BUP Fast HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */
+UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
+ "Initio Corporation",
+ "",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Tom Arild Naess <tanaess@gmail.com> */
+UNUSUAL_DEV(0x152d, 0x0539, 0x0000, 0x9999,
+ "JMicron",
+ "JMS539",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_OPCODES),
+
+/* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
+UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
+ "JMicron",
+ "JMS567",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_OPCODES),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
+ "VIA",
+ "VL711",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Takeo Nakayama <javhera@gmx.com> */
+UNUSUAL_DEV(0x357d, 0x7788, 0x0000, 0x9999,
+ "JMicron",
+ "JMS566",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_OPCODES),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999,
+ "Hitachi",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
+/* Reported-by: Richard Henderson <rth@redhat.com> */
+UNUSUAL_DEV(0x4971, 0x8017, 0x0000, 0x9999,
+ "SimpleTech",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_OPCODES),
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
new file mode 100644
index 000000000..38e79c4e6
--- /dev/null
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -0,0 +1,43 @@
+/* Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_USBAT) || \
+ defined(CONFIG_USB_STORAGE_USBAT_MODULE)
+
+UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
+ "HP",
+ "CD-Writer+ 8200e",
+ USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
+ "HP",
+ "CD-Writer+ CD-4e",
+ USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
+ "Shuttle/SCM",
+ "USBAT-02",
+ USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
+ US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
+ "Sandisk",
+ "ImageMate SDDR-05b",
+ USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
+ US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
new file mode 100644
index 000000000..6c10c888f
--- /dev/null
+++ b/drivers/usb/storage/usb.c
@@ -0,0 +1,1140 @@
+/* Driver for USB Mass Storage compliant devices
+ *
+ * Current development and maintenance by:
+ * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Developed with the assistance of:
+ * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
+ * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
+ *
+ * Initial work by:
+ * (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
+ * (c) 2000 Yggdrasil Computing, Inc.
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/freezer.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/utsname.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "scsiglue.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "initializers.h"
+
+#include "sierra_ms.h"
+#include "option_ms.h"
+
+#if IS_ENABLED(CONFIG_USB_UAS)
+#include "uas-detect.h"
+#endif
+
+/* Some informational data */
+MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
+MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
+MODULE_LICENSE("GPL");
+
+static unsigned int delay_use = 1;
+module_param(delay_use, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
+
+static char quirks[128];
+module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
+
+
+/*
+ * The entries in this table correspond, line for line,
+ * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
+ */
+
+/* The vendor name should be kept at eight characters or less, and
+ * the product name should be kept at 16 characters or less. If a device
+ * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
+ * normally generated by a device through the INQUIRY response will be
+ * taken from this list, and this is the reason for the above size
+ * restriction. However, if the flag is not present, then you
+ * are free to use as many characters as you like.
+ */
+
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+#define COMPLIANT_DEV UNUSUAL_DEV
+
+#define USUAL_DEV(use_protocol, use_transport) \
+{ \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+}
+
+#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev us_unusual_dev_list[] = {
+# include "unusual_devs.h"
+ { } /* Terminating entry */
+};
+
+static struct us_unusual_dev for_dynamic_ids =
+ USUAL_DEV(USB_SC_SCSI, USB_PR_BULK);
+
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+#undef UNUSUAL_VENDOR_INTF
+
+#ifdef CONFIG_LOCKDEP
+
+static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
+
+static void us_set_lock_class(struct mutex *mutex,
+ struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_host_config *config = udev->actconfig;
+ int i;
+
+ for (i = 0; i < config->desc.bNumInterfaces; i++) {
+ if (config->interface[i] == intf)
+ break;
+ }
+
+ BUG_ON(i == config->desc.bNumInterfaces);
+
+ lockdep_set_class(mutex, &us_interface_key[i]);
+}
+
+#else
+
+static void us_set_lock_class(struct mutex *mutex,
+ struct usb_interface *intf)
+{
+}
+
+#endif
+
+#ifdef CONFIG_PM /* Minimal support for suspend and resume */
+
+int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ /* Wait until no command is running */
+ mutex_lock(&us->dev_mutex);
+
+ if (us->suspend_resume_hook)
+ (us->suspend_resume_hook)(us, US_SUSPEND);
+
+ /* When runtime PM is working, we'll set a flag to indicate
+ * whether we should autoresume when a SCSI request arrives. */
+
+ mutex_unlock(&us->dev_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_suspend);
+
+int usb_stor_resume(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ mutex_lock(&us->dev_mutex);
+
+ if (us->suspend_resume_hook)
+ (us->suspend_resume_hook)(us, US_RESUME);
+
+ mutex_unlock(&us->dev_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_resume);
+
+int usb_stor_reset_resume(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ /* Report the reset to the SCSI core */
+ usb_stor_report_bus_reset(us);
+
+ /* FIXME: Notify the subdrivers that they need to reinitialize
+ * the device */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
+
+#endif /* CONFIG_PM */
+
+/*
+ * The next two routines get called just before and just after
+ * a USB port reset, whether from this driver or a different one.
+ */
+
+int usb_stor_pre_reset(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ /* Make sure no command runs during the reset */
+ mutex_lock(&us->dev_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
+
+int usb_stor_post_reset(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ /* Report the reset to the SCSI core */
+ usb_stor_report_bus_reset(us);
+
+ /* FIXME: Notify the subdrivers that they need to reinitialize
+ * the device */
+
+ mutex_unlock(&us->dev_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_stor_post_reset);
+
+/*
+ * fill_inquiry_response takes an unsigned char array (which must
+ * be at least 36 characters) and populates the vendor name,
+ * product name, and revision fields. Then the array is copied
+ * into the SCSI command's response buffer (oddly enough
+ * called request_buffer). data_len contains the length of the
+ * data array, which again must be at least 36.
+ */
+
+void fill_inquiry_response(struct us_data *us, unsigned char *data,
+ unsigned int data_len)
+{
+ if (data_len < 36) /* You lose. */
+ return;
+
+ memset(data+8, ' ', 28);
+ if (data[0]&0x20) { /* USB device currently not connected. Return
+ peripheral qualifier 001b ("...however, the
+ physical device is not currently connected
+ to this logical unit") and leave vendor and
+ product identification empty. ("If the target
+ does store some of the INQUIRY data on the
+ device, it may return zeros or ASCII spaces
+ (20h) in those fields until the data is
+ available from the device."). */
+ } else {
+ u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
+ int n;
+
+ n = strlen(us->unusual_dev->vendorName);
+ memcpy(data+8, us->unusual_dev->vendorName, min(8, n));
+ n = strlen(us->unusual_dev->productName);
+ memcpy(data+16, us->unusual_dev->productName, min(16, n));
+
+ data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
+ data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
+ data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
+ data[35] = 0x30 + ((bcdDevice) & 0x0F);
+ }
+
+ usb_stor_set_xfer_buf(data, data_len, us->srb);
+}
+EXPORT_SYMBOL_GPL(fill_inquiry_response);
+
+static int usb_stor_control_thread(void * __us)
+{
+ struct us_data *us = (struct us_data *)__us;
+ struct Scsi_Host *host = us_to_host(us);
+
+ for (;;) {
+ usb_stor_dbg(us, "*** thread sleeping\n");
+ if (wait_for_completion_interruptible(&us->cmnd_ready))
+ break;
+
+ usb_stor_dbg(us, "*** thread awakened\n");
+
+ /* lock the device pointers */
+ mutex_lock(&(us->dev_mutex));
+
+ /* lock access to the state */
+ scsi_lock(host);
+
+ /* When we are called with no command pending, we're done */
+ if (us->srb == NULL) {
+ scsi_unlock(host);
+ mutex_unlock(&us->dev_mutex);
+ usb_stor_dbg(us, "-- exiting\n");
+ break;
+ }
+
+ /* has the command timed out *already* ? */
+ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+ us->srb->result = DID_ABORT << 16;
+ goto SkipForAbort;
+ }
+
+ scsi_unlock(host);
+
+ /* reject the command if the direction indicator
+ * is UNKNOWN
+ */
+ if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
+ usb_stor_dbg(us, "UNKNOWN data direction\n");
+ us->srb->result = DID_ERROR << 16;
+ }
+
+ /* reject if target != 0 or if LUN is higher than
+ * the maximum known LUN
+ */
+ else if (us->srb->device->id &&
+ !(us->fflags & US_FL_SCM_MULT_TARG)) {
+ usb_stor_dbg(us, "Bad target number (%d:%llu)\n",
+ us->srb->device->id,
+ us->srb->device->lun);
+ us->srb->result = DID_BAD_TARGET << 16;
+ }
+
+ else if (us->srb->device->lun > us->max_lun) {
+ usb_stor_dbg(us, "Bad LUN (%d:%llu)\n",
+ us->srb->device->id,
+ us->srb->device->lun);
+ us->srb->result = DID_BAD_TARGET << 16;
+ }
+
+ /* Handle those devices which need us to fake
+ * their inquiry data */
+ else if ((us->srb->cmnd[0] == INQUIRY) &&
+ (us->fflags & US_FL_FIX_INQUIRY)) {
+ unsigned char data_ptr[36] = {
+ 0x00, 0x80, 0x02, 0x02,
+ 0x1F, 0x00, 0x00, 0x00};
+
+ usb_stor_dbg(us, "Faking INQUIRY command\n");
+ fill_inquiry_response(us, data_ptr, 36);
+ us->srb->result = SAM_STAT_GOOD;
+ }
+
+ /* we've got a command, let's do it! */
+ else {
+ US_DEBUG(usb_stor_show_command(us, us->srb));
+ us->proto_handler(us->srb, us);
+ usb_mark_last_busy(us->pusb_dev);
+ }
+
+ /* lock access to the state */
+ scsi_lock(host);
+
+ /* indicate that the command is done */
+ if (us->srb->result != DID_ABORT << 16) {
+ usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
+ us->srb->result);
+ us->srb->scsi_done(us->srb);
+ } else {
+SkipForAbort:
+ usb_stor_dbg(us, "scsi command aborted\n");
+ }
+
+ /* If an abort request was received we need to signal that
+ * the abort has finished. The proper test for this is
+ * the TIMED_OUT flag, not srb->result == DID_ABORT, because
+ * the timeout might have occurred after the command had
+ * already completed with a different result code. */
+ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
+ complete(&(us->notify));
+
+ /* Allow USB transfers to resume */
+ clear_bit(US_FLIDX_ABORTING, &us->dflags);
+ clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
+ }
+
+ /* finished working on this command */
+ us->srb = NULL;
+ scsi_unlock(host);
+
+ /* unlock the device pointers */
+ mutex_unlock(&us->dev_mutex);
+ } /* for (;;) */
+
+ /* Wait until we are told to stop */
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (kthread_should_stop())
+ break;
+ schedule();
+ }
+ __set_current_state(TASK_RUNNING);
+ return 0;
+}
+
+/***********************************************************************
+ * Device probing and disconnecting
+ ***********************************************************************/
+
+/* Associate our private data with the USB device */
+static int associate_dev(struct us_data *us, struct usb_interface *intf)
+{
+ /* Fill in the device-related fields */
+ us->pusb_dev = interface_to_usbdev(intf);
+ us->pusb_intf = intf;
+ us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+ usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
+ le16_to_cpu(us->pusb_dev->descriptor.idVendor),
+ le16_to_cpu(us->pusb_dev->descriptor.idProduct),
+ le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
+ usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
+ intf->cur_altsetting->desc.bInterfaceSubClass,
+ intf->cur_altsetting->desc.bInterfaceProtocol);
+
+ /* Store our private data in the interface */
+ usb_set_intfdata(intf, us);
+
+ /* Allocate the control/setup and DMA-mapped buffers */
+ us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
+ if (!us->cr)
+ return -ENOMEM;
+
+ us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
+ GFP_KERNEL, &us->iobuf_dma);
+ if (!us->iobuf) {
+ usb_stor_dbg(us, "I/O buffer allocation failed\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/* Works only for digits and letters, but small and fast */
+#define TOLOWER(x) ((x) | 0x20)
+
+/* Adjust device flags based on the "quirks=" module parameter */
+void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
+{
+ char *p;
+ u16 vid = le16_to_cpu(udev->descriptor.idVendor);
+ u16 pid = le16_to_cpu(udev->descriptor.idProduct);
+ unsigned f = 0;
+ unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
+ US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS |
+ US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
+ US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
+ US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
+ US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
+ US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
+ US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
+ US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
+ US_FL_MAX_SECTORS_240);
+
+ p = quirks;
+ while (*p) {
+ /* Each entry consists of VID:PID:flags */
+ if (vid == simple_strtoul(p, &p, 16) &&
+ *p == ':' &&
+ pid == simple_strtoul(p+1, &p, 16) &&
+ *p == ':')
+ break;
+
+ /* Move forward to the next entry */
+ while (*p) {
+ if (*p++ == ',')
+ break;
+ }
+ }
+ if (!*p) /* No match */
+ return;
+
+ /* Collect the flags */
+ while (*++p && *p != ',') {
+ switch (TOLOWER(*p)) {
+ case 'a':
+ f |= US_FL_SANE_SENSE;
+ break;
+ case 'b':
+ f |= US_FL_BAD_SENSE;
+ break;
+ case 'c':
+ f |= US_FL_FIX_CAPACITY;
+ break;
+ case 'd':
+ f |= US_FL_NO_READ_DISC_INFO;
+ break;
+ case 'e':
+ f |= US_FL_NO_READ_CAPACITY_16;
+ break;
+ case 'f':
+ f |= US_FL_NO_REPORT_OPCODES;
+ break;
+ case 'g':
+ f |= US_FL_MAX_SECTORS_240;
+ break;
+ case 'h':
+ f |= US_FL_CAPACITY_HEURISTICS;
+ break;
+ case 'i':
+ f |= US_FL_IGNORE_DEVICE;
+ break;
+ case 'l':
+ f |= US_FL_NOT_LOCKABLE;
+ break;
+ case 'm':
+ f |= US_FL_MAX_SECTORS_64;
+ break;
+ case 'n':
+ f |= US_FL_INITIAL_READ10;
+ break;
+ case 'o':
+ f |= US_FL_CAPACITY_OK;
+ break;
+ case 'p':
+ f |= US_FL_WRITE_CACHE;
+ break;
+ case 'r':
+ f |= US_FL_IGNORE_RESIDUE;
+ break;
+ case 's':
+ f |= US_FL_SINGLE_LUN;
+ break;
+ case 't':
+ f |= US_FL_NO_ATA_1X;
+ break;
+ case 'u':
+ f |= US_FL_IGNORE_UAS;
+ break;
+ case 'w':
+ f |= US_FL_NO_WP_DETECT;
+ break;
+ /* Ignore unrecognized flag characters */
+ }
+ }
+ *fflags = (*fflags & ~mask) | f;
+}
+EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks);
+
+/* Get the unusual_devs entries and the string descriptors */
+static int get_device_info(struct us_data *us, const struct usb_device_id *id,
+ struct us_unusual_dev *unusual_dev)
+{
+ struct usb_device *dev = us->pusb_dev;
+ struct usb_interface_descriptor *idesc =
+ &us->pusb_intf->cur_altsetting->desc;
+ struct device *pdev = &us->pusb_intf->dev;
+
+ /* Store the entries */
+ us->unusual_dev = unusual_dev;
+ us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
+ idesc->bInterfaceSubClass :
+ unusual_dev->useProtocol;
+ us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
+ idesc->bInterfaceProtocol :
+ unusual_dev->useTransport;
+ us->fflags = id->driver_info;
+ usb_stor_adjust_quirks(us->pusb_dev, &us->fflags);
+
+ if (us->fflags & US_FL_IGNORE_DEVICE) {
+ dev_info(pdev, "device ignored\n");
+ return -ENODEV;
+ }
+
+ /*
+ * This flag is only needed when we're in high-speed, so let's
+ * disable it if we're in full-speed
+ */
+ if (dev->speed != USB_SPEED_HIGH)
+ us->fflags &= ~US_FL_GO_SLOW;
+
+ if (us->fflags)
+ dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct),
+ us->fflags);
+
+ /* Log a message if a non-generic unusual_dev entry contains an
+ * unnecessary subclass or protocol override. This may stimulate
+ * reports from users that will help us remove unneeded entries
+ * from the unusual_devs.h table.
+ */
+ if (id->idVendor || id->idProduct) {
+ static const char *msgs[3] = {
+ "an unneeded SubClass entry",
+ "an unneeded Protocol entry",
+ "unneeded SubClass and Protocol entries"};
+ struct usb_device_descriptor *ddesc = &dev->descriptor;
+ int msg = -1;
+
+ if (unusual_dev->useProtocol != USB_SC_DEVICE &&
+ us->subclass == idesc->bInterfaceSubClass)
+ msg += 1;
+ if (unusual_dev->useTransport != USB_PR_DEVICE &&
+ us->protocol == idesc->bInterfaceProtocol)
+ msg += 2;
+ if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
+ dev_notice(pdev, "This device "
+ "(%04x,%04x,%04x S %02x P %02x)"
+ " has %s in unusual_devs.h (kernel"
+ " %s)\n"
+ " Please send a copy of this message to "
+ "<linux-usb@vger.kernel.org> and "
+ "<usb-storage@lists.one-eyed-alien.net>\n",
+ le16_to_cpu(ddesc->idVendor),
+ le16_to_cpu(ddesc->idProduct),
+ le16_to_cpu(ddesc->bcdDevice),
+ idesc->bInterfaceSubClass,
+ idesc->bInterfaceProtocol,
+ msgs[msg],
+ utsname()->release);
+ }
+
+ return 0;
+}
+
+/* Get the transport settings */
+static void get_transport(struct us_data *us)
+{
+ switch (us->protocol) {
+ case USB_PR_CB:
+ us->transport_name = "Control/Bulk";
+ us->transport = usb_stor_CB_transport;
+ us->transport_reset = usb_stor_CB_reset;
+ us->max_lun = 7;
+ break;
+
+ case USB_PR_CBI:
+ us->transport_name = "Control/Bulk/Interrupt";
+ us->transport = usb_stor_CB_transport;
+ us->transport_reset = usb_stor_CB_reset;
+ us->max_lun = 7;
+ break;
+
+ case USB_PR_BULK:
+ us->transport_name = "Bulk";
+ us->transport = usb_stor_Bulk_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ break;
+ }
+}
+
+/* Get the protocol settings */
+static void get_protocol(struct us_data *us)
+{
+ switch (us->subclass) {
+ case USB_SC_RBC:
+ us->protocol_name = "Reduced Block Commands (RBC)";
+ us->proto_handler = usb_stor_transparent_scsi_command;
+ break;
+
+ case USB_SC_8020:
+ us->protocol_name = "8020i";
+ us->proto_handler = usb_stor_pad12_command;
+ us->max_lun = 0;
+ break;
+
+ case USB_SC_QIC:
+ us->protocol_name = "QIC-157";
+ us->proto_handler = usb_stor_pad12_command;
+ us->max_lun = 0;
+ break;
+
+ case USB_SC_8070:
+ us->protocol_name = "8070i";
+ us->proto_handler = usb_stor_pad12_command;
+ us->max_lun = 0;
+ break;
+
+ case USB_SC_SCSI:
+ us->protocol_name = "Transparent SCSI";
+ us->proto_handler = usb_stor_transparent_scsi_command;
+ break;
+
+ case USB_SC_UFI:
+ us->protocol_name = "Uniform Floppy Interface (UFI)";
+ us->proto_handler = usb_stor_ufi_command;
+ break;
+ }
+}
+
+/* Get the pipe settings */
+static int get_pipes(struct us_data *us)
+{
+ struct usb_host_interface *altsetting =
+ us->pusb_intf->cur_altsetting;
+ int i;
+ struct usb_endpoint_descriptor *ep;
+ struct usb_endpoint_descriptor *ep_in = NULL;
+ struct usb_endpoint_descriptor *ep_out = NULL;
+ struct usb_endpoint_descriptor *ep_int = NULL;
+
+ /*
+ * Find the first endpoint of each type we need.
+ * We are expecting a minimum of 2 endpoints - in and out (bulk).
+ * An optional interrupt-in is OK (necessary for CBI protocol).
+ * We will ignore any others.
+ */
+ for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
+ ep = &altsetting->endpoint[i].desc;
+
+ if (usb_endpoint_xfer_bulk(ep)) {
+ if (usb_endpoint_dir_in(ep)) {
+ if (!ep_in)
+ ep_in = ep;
+ } else {
+ if (!ep_out)
+ ep_out = ep;
+ }
+ }
+
+ else if (usb_endpoint_is_int_in(ep)) {
+ if (!ep_int)
+ ep_int = ep;
+ }
+ }
+
+ if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
+ usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n");
+ return -EIO;
+ }
+
+ /* Calculate and store the pipe values */
+ us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
+ us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
+ us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
+ usb_endpoint_num(ep_out));
+ us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
+ usb_endpoint_num(ep_in));
+ if (ep_int) {
+ us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
+ usb_endpoint_num(ep_int));
+ us->ep_bInterval = ep_int->bInterval;
+ }
+ return 0;
+}
+
+/* Initialize all the dynamic resources we need */
+static int usb_stor_acquire_resources(struct us_data *us)
+{
+ int p;
+ struct task_struct *th;
+
+ us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!us->current_urb) {
+ usb_stor_dbg(us, "URB allocation failed\n");
+ return -ENOMEM;
+ }
+
+ /* Just before we start our control thread, initialize
+ * the device if it needs initialization */
+ if (us->unusual_dev->initFunction) {
+ p = us->unusual_dev->initFunction(us);
+ if (p)
+ return p;
+ }
+
+ /* Start up our control thread */
+ th = kthread_run(usb_stor_control_thread, us, "usb-storage");
+ if (IS_ERR(th)) {
+ dev_warn(&us->pusb_intf->dev,
+ "Unable to start control thread\n");
+ return PTR_ERR(th);
+ }
+ us->ctl_thread = th;
+
+ return 0;
+}
+
+/* Release all our dynamic resources */
+static void usb_stor_release_resources(struct us_data *us)
+{
+ /* Tell the control thread to exit. The SCSI host must
+ * already have been removed and the DISCONNECTING flag set
+ * so that we won't accept any more commands.
+ */
+ usb_stor_dbg(us, "-- sending exit command to thread\n");
+ complete(&us->cmnd_ready);
+ if (us->ctl_thread)
+ kthread_stop(us->ctl_thread);
+
+ /* Call the destructor routine, if it exists */
+ if (us->extra_destructor) {
+ usb_stor_dbg(us, "-- calling extra_destructor()\n");
+ us->extra_destructor(us->extra);
+ }
+
+ /* Free the extra data and the URB */
+ kfree(us->extra);
+ usb_free_urb(us->current_urb);
+}
+
+/* Dissociate from the USB device */
+static void dissociate_dev(struct us_data *us)
+{
+ /* Free the buffers */
+ kfree(us->cr);
+ usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
+
+ /* Remove our private data from the interface */
+ usb_set_intfdata(us->pusb_intf, NULL);
+}
+
+/* First stage of disconnect processing: stop SCSI scanning,
+ * remove the host, and stop accepting new commands
+ */
+static void quiesce_and_remove_host(struct us_data *us)
+{
+ struct Scsi_Host *host = us_to_host(us);
+
+ /* If the device is really gone, cut short reset delays */
+ if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
+ set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+ wake_up(&us->delay_wait);
+ }
+
+ /* Prevent SCSI scanning (if it hasn't started yet)
+ * or wait for the SCSI-scanning routine to stop.
+ */
+ cancel_delayed_work_sync(&us->scan_dwork);
+
+ /* Balance autopm calls if scanning was cancelled */
+ if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
+ usb_autopm_put_interface_no_suspend(us->pusb_intf);
+
+ /* Removing the host will perform an orderly shutdown: caches
+ * synchronized, disks spun down, etc.
+ */
+ scsi_remove_host(host);
+
+ /* Prevent any new commands from being accepted and cut short
+ * reset delays.
+ */
+ scsi_lock(host);
+ set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+ scsi_unlock(host);
+ wake_up(&us->delay_wait);
+}
+
+/* Second stage of disconnect processing: deallocate all resources */
+static void release_everything(struct us_data *us)
+{
+ usb_stor_release_resources(us);
+ dissociate_dev(us);
+
+ /* Drop our reference to the host; the SCSI core will free it
+ * (and "us" along with it) when the refcount becomes 0. */
+ scsi_host_put(us_to_host(us));
+}
+
+/* Delayed-work routine to carry out SCSI-device scanning */
+static void usb_stor_scan_dwork(struct work_struct *work)
+{
+ struct us_data *us = container_of(work, struct us_data,
+ scan_dwork.work);
+ struct device *dev = &us->pusb_intf->dev;
+
+ dev_dbg(dev, "starting scan\n");
+
+ /* For bulk-only devices, determine the max LUN value */
+ if (us->protocol == USB_PR_BULK &&
+ !(us->fflags & US_FL_SINGLE_LUN) &&
+ !(us->fflags & US_FL_SCM_MULT_TARG)) {
+ mutex_lock(&us->dev_mutex);
+ us->max_lun = usb_stor_Bulk_max_lun(us);
+ /*
+ * Allow proper scanning of devices that present more than 8 LUNs
+ * While not affecting other devices that may need the previous behavior
+ */
+ if (us->max_lun >= 8)
+ us_to_host(us)->max_lun = us->max_lun+1;
+ mutex_unlock(&us->dev_mutex);
+ }
+ scsi_scan_host(us_to_host(us));
+ dev_dbg(dev, "scan complete\n");
+
+ /* Should we unbind if no devices were detected? */
+
+ usb_autopm_put_interface(us->pusb_intf);
+ clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
+}
+
+static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+
+ if (usb_dev->bus->sg_tablesize) {
+ return usb_dev->bus->sg_tablesize;
+ }
+ return SG_ALL;
+}
+
+/* First part of general USB mass-storage probing */
+int usb_stor_probe1(struct us_data **pus,
+ struct usb_interface *intf,
+ const struct usb_device_id *id,
+ struct us_unusual_dev *unusual_dev)
+{
+ struct Scsi_Host *host;
+ struct us_data *us;
+ int result;
+
+ dev_info(&intf->dev, "USB Mass Storage device detected\n");
+
+ /*
+ * Ask the SCSI layer to allocate a host structure, with extra
+ * space at the end for our private us_data structure.
+ */
+ host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
+ if (!host) {
+ dev_warn(&intf->dev, "Unable to allocate the scsi host\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Allow 16-byte CDBs and thus > 2TB
+ */
+ host->max_cmd_len = 16;
+ host->sg_tablesize = usb_stor_sg_tablesize(intf);
+ *pus = us = host_to_us(host);
+ mutex_init(&(us->dev_mutex));
+ us_set_lock_class(&us->dev_mutex, intf);
+ init_completion(&us->cmnd_ready);
+ init_completion(&(us->notify));
+ init_waitqueue_head(&us->delay_wait);
+ INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
+
+ /* Associate the us_data structure with the USB device */
+ result = associate_dev(us, intf);
+ if (result)
+ goto BadDevice;
+
+ /* Get the unusual_devs entries and the descriptors */
+ result = get_device_info(us, id, unusual_dev);
+ if (result)
+ goto BadDevice;
+
+ /* Get standard transport and protocol settings */
+ get_transport(us);
+ get_protocol(us);
+
+ /* Give the caller a chance to fill in specialized transport
+ * or protocol settings.
+ */
+ return 0;
+
+BadDevice:
+ usb_stor_dbg(us, "storage_probe() failed\n");
+ release_everything(us);
+ return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_probe1);
+
+/* Second part of general USB mass-storage probing */
+int usb_stor_probe2(struct us_data *us)
+{
+ int result;
+ struct device *dev = &us->pusb_intf->dev;
+
+ /* Make sure the transport and protocol have both been set */
+ if (!us->transport || !us->proto_handler) {
+ result = -ENXIO;
+ goto BadDevice;
+ }
+ usb_stor_dbg(us, "Transport: %s\n", us->transport_name);
+ usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name);
+
+ if (us->fflags & US_FL_SCM_MULT_TARG) {
+ /*
+ * SCM eUSCSI bridge devices can have different numbers
+ * of LUNs on different targets; allow all to be probed.
+ */
+ us->max_lun = 7;
+ /* The eUSCSI itself has ID 7, so avoid scanning that */
+ us_to_host(us)->this_id = 7;
+ /* max_id is 8 initially, so no need to set it here */
+ } else {
+ /* In the normal case there is only a single target */
+ us_to_host(us)->max_id = 1;
+ /*
+ * Like Windows, we won't store the LUN bits in CDB[1] for
+ * SCSI-2 devices using the Bulk-Only transport (even though
+ * this violates the SCSI spec).
+ */
+ if (us->transport == usb_stor_Bulk_transport)
+ us_to_host(us)->no_scsi2_lun_in_cdb = 1;
+ }
+
+ /* fix for single-lun devices */
+ if (us->fflags & US_FL_SINGLE_LUN)
+ us->max_lun = 0;
+
+ /* Find the endpoints and calculate pipe values */
+ result = get_pipes(us);
+ if (result)
+ goto BadDevice;
+
+ /*
+ * If the device returns invalid data for the first READ(10)
+ * command, indicate the command should be retried.
+ */
+ if (us->fflags & US_FL_INITIAL_READ10)
+ set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+
+ /* Acquire all the other resources and add the host */
+ result = usb_stor_acquire_resources(us);
+ if (result)
+ goto BadDevice;
+ snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
+ dev_name(&us->pusb_intf->dev));
+ result = scsi_add_host(us_to_host(us), dev);
+ if (result) {
+ dev_warn(dev,
+ "Unable to add the scsi host\n");
+ goto BadDevice;
+ }
+
+ /* Submit the delayed_work for SCSI-device scanning */
+ usb_autopm_get_interface_no_resume(us->pusb_intf);
+ set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
+
+ if (delay_use > 0)
+ dev_dbg(dev, "waiting for device to settle before scanning\n");
+ queue_delayed_work(system_freezable_wq, &us->scan_dwork,
+ delay_use * HZ);
+ return 0;
+
+ /* We come here if there are any problems */
+BadDevice:
+ usb_stor_dbg(us, "storage_probe() failed\n");
+ release_everything(us);
+ return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_probe2);
+
+/* Handle a USB mass-storage disconnect */
+void usb_stor_disconnect(struct usb_interface *intf)
+{
+ struct us_data *us = usb_get_intfdata(intf);
+
+ quiesce_and_remove_host(us);
+ release_everything(us);
+}
+EXPORT_SYMBOL_GPL(usb_stor_disconnect);
+
+/* The main probe routine for standard devices */
+static int storage_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_unusual_dev *unusual_dev;
+ struct us_data *us;
+ int result;
+ int size;
+
+ /* If uas is enabled and this device can do uas then ignore it. */
+#if IS_ENABLED(CONFIG_USB_UAS)
+ if (uas_use_uas_driver(intf, id, NULL))
+ return -ENXIO;
+#endif
+
+ /*
+ * If the device isn't standard (is handled by a subdriver
+ * module) then don't accept it.
+ */
+ if (usb_usual_ignore_device(intf))
+ return -ENXIO;
+
+ /*
+ * Call the general probe procedures.
+ *
+ * The unusual_dev_list array is parallel to the usb_storage_usb_ids
+ * table, so we use the index of the id entry to find the
+ * corresponding unusual_devs entry.
+ */
+
+ size = ARRAY_SIZE(us_unusual_dev_list);
+ if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) {
+ unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list;
+ } else {
+ unusual_dev = &for_dynamic_ids;
+
+ dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n",
+ id->idVendor, id->idProduct);
+ }
+
+ result = usb_stor_probe1(&us, intf, id, unusual_dev);
+ if (result)
+ return result;
+
+ /* No special transport or protocol settings in the main module */
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver usb_storage_driver = {
+ .name = "usb-storage",
+ .probe = storage_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = usb_storage_usb_ids,
+ .supports_autosuspend = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(usb_storage_driver);
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
new file mode 100644
index 000000000..307e339a9
--- /dev/null
+++ b/drivers/usb/storage/usb.h
@@ -0,0 +1,207 @@
+/* Driver for USB Mass Storage compliant devices
+ * Main Header File
+ *
+ * Current development and maintenance by:
+ * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Initial work by:
+ * (c) 1999 Michael Gee (michael@linuxspecific.com)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices. Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document. The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _USB_H_
+#define _USB_H_
+
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+
+struct us_data;
+struct scsi_cmnd;
+
+/*
+ * Unusual device list definitions
+ */
+
+struct us_unusual_dev {
+ const char* vendorName;
+ const char* productName;
+ __u8 useProtocol;
+ __u8 useTransport;
+ int (*initFunction)(struct us_data *);
+};
+
+
+/* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */
+#define US_FLIDX_URB_ACTIVE 0 /* current_urb is in use */
+#define US_FLIDX_SG_ACTIVE 1 /* current_sg is in use */
+#define US_FLIDX_ABORTING 2 /* abort is in progress */
+#define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */
+#define US_FLIDX_RESETTING 4 /* device reset in progress */
+#define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */
+#define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */
+#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */
+#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */
+
+#define USB_STOR_STRING_LEN 32
+
+/*
+ * We provide a DMA-mapped I/O buffer for use with small USB transfers.
+ * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
+ * 31-byte buffer. But Freecom needs a 64-byte buffer, so that's the
+ * size we'll allocate.
+ */
+
+#define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */
+#define US_SENSE_SIZE 18 /* Size of the autosense data buffer */
+
+typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
+typedef int (*trans_reset)(struct us_data*);
+typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*);
+typedef void (*extra_data_destructor)(void *); /* extra data destructor */
+typedef void (*pm_hook)(struct us_data *, int); /* power management hook */
+
+#define US_SUSPEND 0
+#define US_RESUME 1
+
+/* we allocate one of these for every device that we remember */
+struct us_data {
+ /* The device we're working with
+ * It's important to note:
+ * (o) you must hold dev_mutex to change pusb_dev
+ */
+ struct mutex dev_mutex; /* protect pusb_dev */
+ struct usb_device *pusb_dev; /* this usb_device */
+ struct usb_interface *pusb_intf; /* this interface */
+ struct us_unusual_dev *unusual_dev; /* device-filter entry */
+ unsigned long fflags; /* fixed flags from filter */
+ unsigned long dflags; /* dynamic atomic bitflags */
+ unsigned int send_bulk_pipe; /* cached pipe values */
+ unsigned int recv_bulk_pipe;
+ unsigned int send_ctrl_pipe;
+ unsigned int recv_ctrl_pipe;
+ unsigned int recv_intr_pipe;
+
+ /* information about the device */
+ char *transport_name;
+ char *protocol_name;
+ __le32 bcs_signature;
+ u8 subclass;
+ u8 protocol;
+ u8 max_lun;
+
+ u8 ifnum; /* interface number */
+ u8 ep_bInterval; /* interrupt interval */
+
+ /* function pointers for this device */
+ trans_cmnd transport; /* transport function */
+ trans_reset transport_reset; /* transport device reset */
+ proto_cmnd proto_handler; /* protocol handler */
+
+ /* SCSI interfaces */
+ struct scsi_cmnd *srb; /* current srb */
+ unsigned int tag; /* current dCBWTag */
+ char scsi_name[32]; /* scsi_host name */
+
+ /* control and bulk communications data */
+ struct urb *current_urb; /* USB requests */
+ struct usb_ctrlrequest *cr; /* control requests */
+ struct usb_sg_request current_sg; /* scatter-gather req. */
+ unsigned char *iobuf; /* I/O buffer */
+ dma_addr_t iobuf_dma; /* buffer DMA addresses */
+ struct task_struct *ctl_thread; /* the control thread */
+
+ /* mutual exclusion and synchronization structures */
+ struct completion cmnd_ready; /* to sleep thread on */
+ struct completion notify; /* thread begin/end */
+ wait_queue_head_t delay_wait; /* wait during reset */
+ struct delayed_work scan_dwork; /* for async scanning */
+
+ /* subdriver information */
+ void *extra; /* Any extra data */
+ extra_data_destructor extra_destructor;/* extra data destructor */
+#ifdef CONFIG_PM
+ pm_hook suspend_resume_hook;
+#endif
+
+ /* hacks for READ CAPACITY bug handling */
+ int use_last_sector_hacks;
+ int last_sector_retries;
+};
+
+/* Convert between us_data and the corresponding Scsi_Host */
+static inline struct Scsi_Host *us_to_host(struct us_data *us) {
+ return container_of((void *) us, struct Scsi_Host, hostdata);
+}
+static inline struct us_data *host_to_us(struct Scsi_Host *host) {
+ return (struct us_data *) host->hostdata;
+}
+
+/* Function to fill an inquiry response. See usb.c for details */
+extern void fill_inquiry_response(struct us_data *us,
+ unsigned char *data, unsigned int data_len);
+
+/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
+ * single queue element srb for write access */
+#define scsi_unlock(host) spin_unlock_irq(host->host_lock)
+#define scsi_lock(host) spin_lock_irq(host->host_lock)
+
+/* General routines provided by the usb-storage standard core */
+#ifdef CONFIG_PM
+extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
+extern int usb_stor_resume(struct usb_interface *iface);
+extern int usb_stor_reset_resume(struct usb_interface *iface);
+#else
+#define usb_stor_suspend NULL
+#define usb_stor_resume NULL
+#define usb_stor_reset_resume NULL
+#endif
+
+extern int usb_stor_pre_reset(struct usb_interface *iface);
+extern int usb_stor_post_reset(struct usb_interface *iface);
+
+extern int usb_stor_probe1(struct us_data **pus,
+ struct usb_interface *intf,
+ const struct usb_device_id *id,
+ struct us_unusual_dev *unusual_dev);
+extern int usb_stor_probe2(struct us_data *us);
+extern void usb_stor_disconnect(struct usb_interface *intf);
+
+extern void usb_stor_adjust_quirks(struct usb_device *dev,
+ unsigned long *fflags);
+
+#endif
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
new file mode 100644
index 000000000..5ef8ce74a
--- /dev/null
+++ b/drivers/usb/storage/usual-tables.c
@@ -0,0 +1,123 @@
+/* Driver for USB Mass Storage devices
+ * Usual Tables File for usb-storage and libusual
+ *
+ * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu)
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+#define COMPLIANT_DEV UNUSUAL_DEV
+
+#define USUAL_DEV(useProto, useTrans) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) }
+
+/* Define the device is matched with Vendor ID and interface descriptors */
+#define UNUSUAL_VENDOR_INTF(id_vendor, cl, sc, pr, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ \
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
+ | USB_DEVICE_ID_MATCH_VENDOR, \
+ .idVendor = (id_vendor), \
+ .bInterfaceClass = (cl), \
+ .bInterfaceSubClass = (sc), \
+ .bInterfaceProtocol = (pr), \
+ .driver_info = (flags) \
+}
+
+struct usb_device_id usb_storage_usb_ids[] = {
+# include "unusual_devs.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+#undef UNUSUAL_VENDOR_INTF
+
+/*
+ * The table of devices to ignore
+ */
+struct ignore_entry {
+ u16 vid, pid, bcdmin, bcdmax;
+};
+
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ \
+ .vid = id_vendor, \
+ .pid = id_product, \
+ .bcdmin = bcdDeviceMin, \
+ .bcdmax = bcdDeviceMax, \
+}
+
+static struct ignore_entry ignore_ids[] = {
+# include "unusual_alauda.h"
+# include "unusual_cypress.h"
+# include "unusual_datafab.h"
+# include "unusual_ene_ub6250.h"
+# include "unusual_freecom.h"
+# include "unusual_isd200.h"
+# include "unusual_jumpshot.h"
+# include "unusual_karma.h"
+# include "unusual_onetouch.h"
+# include "unusual_realtek.h"
+# include "unusual_sddr09.h"
+# include "unusual_sddr55.h"
+# include "unusual_usbat.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+/* Return an error if a device is in the ignore_ids list */
+int usb_usual_ignore_device(struct usb_interface *intf)
+{
+ struct usb_device *udev;
+ unsigned vid, pid, bcd;
+ struct ignore_entry *p;
+
+ udev = interface_to_usbdev(intf);
+ vid = le16_to_cpu(udev->descriptor.idVendor);
+ pid = le16_to_cpu(udev->descriptor.idProduct);
+ bcd = le16_to_cpu(udev->descriptor.bcdDevice);
+
+ for (p = ignore_ids; p->vid; ++p) {
+ if (p->vid == vid && p->pid == pid &&
+ p->bcdmin <= bcd && p->bcdmax >= bcd)
+ return -ENXIO;
+ }
+ return 0;
+}