summaryrefslogtreecommitdiff
path: root/include/linux/clk-provider.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/clk-provider.h')
-rw-r--r--include/linux/clk-provider.h698
1 files changed, 698 insertions, 0 deletions
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
new file mode 100644
index 000000000..df695313f
--- /dev/null
+++ b/include/linux/clk-provider.h
@@ -0,0 +1,698 @@
+/*
+ * linux/include/linux/clk-provider.h
+ *
+ * Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_CLK_PROVIDER_H
+#define __LINUX_CLK_PROVIDER_H
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#ifdef CONFIG_COMMON_CLK
+
+/*
+ * flags used across common struct clk. these flags should only affect the
+ * top-level framework. custom flags for dealing with hardware specifics
+ * belong in struct clk_foo
+ */
+#define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */
+#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */
+#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */
+#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
+#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */
+#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */
+#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */
+#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */
+#define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */
+
+struct clk_hw;
+struct clk_core;
+struct dentry;
+
+/**
+ * struct clk_ops - Callback operations for hardware clocks; these are to
+ * be provided by the clock implementation, and will be called by drivers
+ * through the clk_* api.
+ *
+ * @prepare: Prepare the clock for enabling. This must not return until
+ * the clock is fully prepared, and it's safe to call clk_enable.
+ * This callback is intended to allow clock implementations to
+ * do any initialisation that may sleep. Called with
+ * prepare_lock held.
+ *
+ * @unprepare: Release the clock from its prepared state. This will typically
+ * undo any work done in the @prepare callback. Called with
+ * prepare_lock held.
+ *
+ * @is_prepared: Queries the hardware to determine if the clock is prepared.
+ * This function is allowed to sleep. Optional, if this op is not
+ * set then the prepare count will be used.
+ *
+ * @unprepare_unused: Unprepare the clock atomically. Only called from
+ * clk_disable_unused for prepare clocks with special needs.
+ * Called with prepare mutex held. This function may sleep.
+ *
+ * @enable: Enable the clock atomically. This must not return until the
+ * clock is generating a valid clock signal, usable by consumer
+ * devices. Called with enable_lock held. This function must not
+ * sleep.
+ *
+ * @disable: Disable the clock atomically. Called with enable_lock held.
+ * This function must not sleep.
+ *
+ * @is_enabled: Queries the hardware to determine if the clock is enabled.
+ * This function must not sleep. Optional, if this op is not
+ * set then the enable count will be used.
+ *
+ * @disable_unused: Disable the clock atomically. Only called from
+ * clk_disable_unused for gate clocks with special needs.
+ * Called with enable_lock held. This function must not
+ * sleep.
+ *
+ * @recalc_rate Recalculate the rate of this clock, by querying hardware. The
+ * parent rate is an input parameter. It is up to the caller to
+ * ensure that the prepare_mutex is held across this call.
+ * Returns the calculated rate. Optional, but recommended - if
+ * this op is not set then clock rate will be initialized to 0.
+ *
+ * @round_rate: Given a target rate as input, returns the closest rate actually
+ * supported by the clock. The parent rate is an input/output
+ * parameter.
+ *
+ * @determine_rate: Given a target rate as input, returns the closest rate
+ * actually supported by the clock, and optionally the parent clock
+ * that should be used to provide the clock rate.
+ *
+ * @set_parent: Change the input source of this clock; for clocks with multiple
+ * possible parents specify a new parent by passing in the index
+ * as a u8 corresponding to the parent in either the .parent_names
+ * or .parents arrays. This function in affect translates an
+ * array index into the value programmed into the hardware.
+ * Returns 0 on success, -EERROR otherwise.
+ *
+ * @get_parent: Queries the hardware to determine the parent of a clock. The
+ * return value is a u8 which specifies the index corresponding to
+ * the parent clock. This index can be applied to either the
+ * .parent_names or .parents arrays. In short, this function
+ * translates the parent value read from hardware into an array
+ * index. Currently only called when the clock is initialized by
+ * __clk_init. This callback is mandatory for clocks with
+ * multiple parents. It is optional (and unnecessary) for clocks
+ * with 0 or 1 parents.
+ *
+ * @set_rate: Change the rate of this clock. The requested rate is specified
+ * by the second argument, which should typically be the return
+ * of .round_rate call. The third argument gives the parent rate
+ * which is likely helpful for most .set_rate implementation.
+ * Returns 0 on success, -EERROR otherwise.
+ *
+ * @set_rate_and_parent: Change the rate and the parent of this clock. The
+ * requested rate is specified by the second argument, which
+ * should typically be the return of .round_rate call. The
+ * third argument gives the parent rate which is likely helpful
+ * for most .set_rate_and_parent implementation. The fourth
+ * argument gives the parent index. This callback is optional (and
+ * unnecessary) for clocks with 0 or 1 parents as well as
+ * for clocks that can tolerate switching the rate and the parent
+ * separately via calls to .set_parent and .set_rate.
+ * Returns 0 on success, -EERROR otherwise.
+ *
+ * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
+ * is expressed in ppb (parts per billion). The parent accuracy is
+ * an input parameter.
+ * Returns the calculated accuracy. Optional - if this op is not
+ * set then clock accuracy will be initialized to parent accuracy
+ * or 0 (perfect clock) if clock has no parent.
+ *
+ * @get_phase: Queries the hardware to get the current phase of a clock.
+ * Returned values are 0-359 degrees on success, negative
+ * error codes on failure.
+ *
+ * @set_phase: Shift the phase this clock signal in degrees specified
+ * by the second argument. Valid values for degrees are
+ * 0-359. Return 0 on success, otherwise -EERROR.
+ *
+ * @init: Perform platform-specific initialization magic.
+ * This is not not used by any of the basic clock types.
+ * Please consider other ways of solving initialization problems
+ * before using this callback, as its use is discouraged.
+ *
+ * @debug_init: Set up type-specific debugfs entries for this clock. This
+ * is called once, after the debugfs directory entry for this
+ * clock has been created. The dentry pointer representing that
+ * directory is provided as an argument. Called with
+ * prepare_lock held. Returns 0 on success, -EERROR otherwise.
+ *
+ *
+ * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
+ * implementations to split any work between atomic (enable) and sleepable
+ * (prepare) contexts. If enabling a clock requires code that might sleep,
+ * this must be done in clk_prepare. Clock enable code that will never be
+ * called in a sleepable context may be implemented in clk_enable.
+ *
+ * Typically, drivers will call clk_prepare when a clock may be needed later
+ * (eg. when a device is opened), and clk_enable when the clock is actually
+ * required (eg. from an interrupt). Note that clk_prepare MUST have been
+ * called before clk_enable.
+ */
+struct clk_ops {
+ int (*prepare)(struct clk_hw *hw);
+ void (*unprepare)(struct clk_hw *hw);
+ int (*is_prepared)(struct clk_hw *hw);
+ void (*unprepare_unused)(struct clk_hw *hw);
+ int (*enable)(struct clk_hw *hw);
+ void (*disable)(struct clk_hw *hw);
+ int (*is_enabled)(struct clk_hw *hw);
+ void (*disable_unused)(struct clk_hw *hw);
+ unsigned long (*recalc_rate)(struct clk_hw *hw,
+ unsigned long parent_rate);
+ long (*round_rate)(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate);
+ long (*determine_rate)(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_hw);
+ int (*set_parent)(struct clk_hw *hw, u8 index);
+ u8 (*get_parent)(struct clk_hw *hw);
+ int (*set_rate)(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+ int (*set_rate_and_parent)(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate, u8 index);
+ unsigned long (*recalc_accuracy)(struct clk_hw *hw,
+ unsigned long parent_accuracy);
+ int (*get_phase)(struct clk_hw *hw);
+ int (*set_phase)(struct clk_hw *hw, int degrees);
+ void (*init)(struct clk_hw *hw);
+ int (*debug_init)(struct clk_hw *hw, struct dentry *dentry);
+};
+
+/**
+ * struct clk_init_data - holds init data that's common to all clocks and is
+ * shared between the clock provider and the common clock framework.
+ *
+ * @name: clock name
+ * @ops: operations this clock supports
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ */
+struct clk_init_data {
+ const char *name;
+ const struct clk_ops *ops;
+ const char **parent_names;
+ u8 num_parents;
+ unsigned long flags;
+};
+
+/**
+ * struct clk_hw - handle for traversing from a struct clk to its corresponding
+ * hardware-specific structure. struct clk_hw should be declared within struct
+ * clk_foo and then referenced by the struct clk instance that uses struct
+ * clk_foo's clk_ops
+ *
+ * @core: pointer to the struct clk_core instance that points back to this
+ * struct clk_hw instance
+ *
+ * @clk: pointer to the per-user struct clk instance that can be used to call
+ * into the clk API
+ *
+ * @init: pointer to struct clk_init_data that contains the init data shared
+ * with the common clock framework.
+ */
+struct clk_hw {
+ struct clk_core *core;
+ struct clk *clk;
+ const struct clk_init_data *init;
+};
+
+/*
+ * DOC: Basic clock implementations common to many platforms
+ *
+ * Each basic clock hardware type is comprised of a structure describing the
+ * clock hardware, implementations of the relevant callbacks in struct clk_ops,
+ * unique flags for that hardware type, a registration function and an
+ * alternative macro for static initialization
+ */
+
+/**
+ * struct clk_fixed_rate - fixed-rate clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @fixed_rate: constant frequency of clock
+ */
+struct clk_fixed_rate {
+ struct clk_hw hw;
+ unsigned long fixed_rate;
+ unsigned long fixed_accuracy;
+ u8 flags;
+};
+
+extern const struct clk_ops clk_fixed_rate_ops;
+struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ unsigned long fixed_rate);
+struct clk *clk_register_fixed_rate_with_accuracy(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ unsigned long fixed_rate, unsigned long fixed_accuracy);
+
+void of_fixed_clk_setup(struct device_node *np);
+
+/**
+ * struct clk_gate - gating clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register controlling gate
+ * @bit_idx: single bit controlling gate
+ * @flags: hardware-specific flags
+ * @lock: register lock
+ *
+ * Clock which can gate its output. Implements .enable & .disable
+ *
+ * Flags:
+ * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
+ * enable the clock. Setting this flag does the opposite: setting the bit
+ * disable the clock and clearing it enables the clock
+ * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit
+ * of this register, and mask of gate bits are in higher 16-bit of this
+ * register. While setting the gate bits, higher 16-bit should also be
+ * updated to indicate changing gate bits.
+ */
+struct clk_gate {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 bit_idx;
+ u8 flags;
+ spinlock_t *lock;
+};
+
+#define CLK_GATE_SET_TO_DISABLE BIT(0)
+#define CLK_GATE_HIWORD_MASK BIT(1)
+
+extern const struct clk_ops clk_gate_ops;
+struct clk *clk_register_gate(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock);
+void clk_unregister_gate(struct clk *clk);
+
+struct clk_div_table {
+ unsigned int val;
+ unsigned int div;
+};
+
+/**
+ * struct clk_divider - adjustable divider clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register containing the divider
+ * @shift: shift to the divider bit field
+ * @width: width of the divider bit field
+ * @table: array of value/divider pairs, last entry should have div = 0
+ * @lock: register lock
+ *
+ * Clock with an adjustable divider affecting its output frequency. Implements
+ * .recalc_rate, .set_rate and .round_rate
+ *
+ * Flags:
+ * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
+ * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is
+ * the raw value read from the register, with the value of zero considered
+ * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set.
+ * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
+ * the hardware register
+ * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have
+ * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor.
+ * Some hardware implementations gracefully handle this case and allow a
+ * zero divisor by not modifying their input clock
+ * (divide by one / bypass).
+ * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit
+ * of this register, and mask of divider bits are in higher 16-bit of this
+ * register. While setting the divider bits, higher 16-bit should also be
+ * updated to indicate changing divider bits.
+ * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
+ * to the closest integer instead of the up one.
+ * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
+ * not be changed by the clock framework.
+ */
+struct clk_divider {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 shift;
+ u8 width;
+ u8 flags;
+ const struct clk_div_table *table;
+ spinlock_t *lock;
+};
+
+#define CLK_DIVIDER_ONE_BASED BIT(0)
+#define CLK_DIVIDER_POWER_OF_TWO BIT(1)
+#define CLK_DIVIDER_ALLOW_ZERO BIT(2)
+#define CLK_DIVIDER_HIWORD_MASK BIT(3)
+#define CLK_DIVIDER_ROUND_CLOSEST BIT(4)
+#define CLK_DIVIDER_READ_ONLY BIT(5)
+
+extern const struct clk_ops clk_divider_ops;
+
+unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
+ unsigned int val, const struct clk_div_table *table,
+ unsigned long flags);
+long divider_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate, const struct clk_div_table *table,
+ u8 width, unsigned long flags);
+int divider_get_val(unsigned long rate, unsigned long parent_rate,
+ const struct clk_div_table *table, u8 width,
+ unsigned long flags);
+
+struct clk *clk_register_divider(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, spinlock_t *lock);
+struct clk *clk_register_divider_table(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, const struct clk_div_table *table,
+ spinlock_t *lock);
+void clk_unregister_divider(struct clk *clk);
+
+/**
+ * struct clk_mux - multiplexer clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register controlling multiplexer
+ * @shift: shift to multiplexer bit field
+ * @width: width of mutliplexer bit field
+ * @flags: hardware-specific flags
+ * @lock: register lock
+ *
+ * Clock with multiple selectable parents. Implements .get_parent, .set_parent
+ * and .recalc_rate
+ *
+ * Flags:
+ * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
+ * CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
+ * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this
+ * register, and mask of mux bits are in higher 16-bit of this register.
+ * While setting the mux bits, higher 16-bit should also be updated to
+ * indicate changing mux bits.
+ * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
+ * frequency.
+ */
+struct clk_mux {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u32 *table;
+ u32 mask;
+ u8 shift;
+ u8 flags;
+ spinlock_t *lock;
+};
+
+#define CLK_MUX_INDEX_ONE BIT(0)
+#define CLK_MUX_INDEX_BIT BIT(1)
+#define CLK_MUX_HIWORD_MASK BIT(2)
+#define CLK_MUX_READ_ONLY BIT(3) /* mux can't be changed */
+#define CLK_MUX_ROUND_CLOSEST BIT(4)
+
+extern const struct clk_ops clk_mux_ops;
+extern const struct clk_ops clk_mux_ro_ops;
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_mux_flags, spinlock_t *lock);
+
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned long flags,
+ void __iomem *reg, u8 shift, u32 mask,
+ u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+
+void clk_unregister_mux(struct clk *clk);
+
+void of_fixed_factor_clk_setup(struct device_node *node);
+
+/**
+ * struct clk_fixed_factor - fixed multiplier and divider clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @mult: multiplier
+ * @div: divider
+ *
+ * Clock with a fixed multiplier and divider. The output frequency is the
+ * parent clock rate divided by div and multiplied by mult.
+ * Implements .recalc_rate, .set_rate and .round_rate
+ */
+
+struct clk_fixed_factor {
+ struct clk_hw hw;
+ unsigned int mult;
+ unsigned int div;
+};
+
+extern struct clk_ops clk_fixed_factor_ops;
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ unsigned int mult, unsigned int div);
+
+/**
+ * struct clk_fractional_divider - adjustable fractional divider clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register containing the divider
+ * @mshift: shift to the numerator bit field
+ * @mwidth: width of the numerator bit field
+ * @nshift: shift to the denominator bit field
+ * @nwidth: width of the denominator bit field
+ * @lock: register lock
+ *
+ * Clock with adjustable fractional divider affecting its output frequency.
+ */
+
+struct clk_fractional_divider {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 mshift;
+ u32 mmask;
+ u8 nshift;
+ u32 nmask;
+ u8 flags;
+ spinlock_t *lock;
+};
+
+extern const struct clk_ops clk_fractional_divider_ops;
+struct clk *clk_register_fractional_divider(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth,
+ u8 clk_divider_flags, spinlock_t *lock);
+
+/***
+ * struct clk_composite - aggregate clock of mux, divider and gate clocks
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @mux_hw: handle between composite and hardware-specific mux clock
+ * @rate_hw: handle between composite and hardware-specific rate clock
+ * @gate_hw: handle between composite and hardware-specific gate clock
+ * @mux_ops: clock ops for mux
+ * @rate_ops: clock ops for rate
+ * @gate_ops: clock ops for gate
+ */
+struct clk_composite {
+ struct clk_hw hw;
+ struct clk_ops ops;
+
+ struct clk_hw *mux_hw;
+ struct clk_hw *rate_hw;
+ struct clk_hw *gate_hw;
+
+ const struct clk_ops *mux_ops;
+ const struct clk_ops *rate_ops;
+ const struct clk_ops *gate_ops;
+};
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+ const char **parent_names, int num_parents,
+ struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+ struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
+ struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+ unsigned long flags);
+
+/***
+ * struct clk_gpio_gate - gpio gated clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @gpiod: gpio descriptor
+ *
+ * Clock with a gpio control for enabling and disabling the parent clock.
+ * Implements .enable, .disable and .is_enabled
+ */
+
+struct clk_gpio {
+ struct clk_hw hw;
+ struct gpio_desc *gpiod;
+};
+
+extern const struct clk_ops clk_gpio_gate_ops;
+struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
+ const char *parent_name, unsigned gpio, bool active_low,
+ unsigned long flags);
+
+void of_gpio_clk_gate_setup(struct device_node *node);
+
+/**
+ * clk_register - allocate a new clock, register it and return an opaque cookie
+ * @dev: device that is registering this clock
+ * @hw: link to hardware-specific clock data
+ *
+ * clk_register is the primary interface for populating the clock tree with new
+ * clock nodes. It returns a pointer to the newly allocated struct clk which
+ * cannot be dereferenced by driver code but may be used in conjuction with the
+ * rest of the clock API. In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
+ */
+struct clk *clk_register(struct device *dev, struct clk_hw *hw);
+struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
+
+void clk_unregister(struct clk *clk);
+void devm_clk_unregister(struct device *dev, struct clk *clk);
+
+/* helper functions */
+const char *__clk_get_name(struct clk *clk);
+struct clk_hw *__clk_get_hw(struct clk *clk);
+u8 __clk_get_num_parents(struct clk *clk);
+struct clk *__clk_get_parent(struct clk *clk);
+struct clk *clk_get_parent_by_index(struct clk *clk, u8 index);
+unsigned int __clk_get_enable_count(struct clk *clk);
+unsigned long __clk_get_rate(struct clk *clk);
+unsigned long __clk_get_flags(struct clk *clk);
+bool __clk_is_prepared(struct clk *clk);
+bool __clk_is_enabled(struct clk *clk);
+struct clk *__clk_lookup(const char *name);
+long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_p);
+unsigned long __clk_determine_rate(struct clk_hw *core,
+ unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate);
+long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_p);
+
+static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src)
+{
+ dst->clk = src->clk;
+ dst->core = src->core;
+}
+
+/*
+ * FIXME clock api without lock protection
+ */
+unsigned long __clk_round_rate(struct clk *clk, unsigned long rate);
+
+struct of_device_id;
+
+typedef void (*of_clk_init_cb_t)(struct device_node *);
+
+struct clk_onecell_data {
+ struct clk **clks;
+ unsigned int clk_num;
+};
+
+extern struct of_device_id __clk_of_table;
+
+#define CLK_OF_DECLARE(name, compat, fn) OF_DECLARE_1(clk, name, compat, fn)
+
+#ifdef CONFIG_OF
+int of_clk_add_provider(struct device_node *np,
+ struct clk *(*clk_src_get)(struct of_phandle_args *args,
+ void *data),
+ void *data);
+void of_clk_del_provider(struct device_node *np);
+struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
+ void *data);
+struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
+int of_clk_get_parent_count(struct device_node *np);
+const char *of_clk_get_parent_name(struct device_node *np, int index);
+
+void of_clk_init(const struct of_device_id *matches);
+
+#else /* !CONFIG_OF */
+
+static inline int of_clk_add_provider(struct device_node *np,
+ struct clk *(*clk_src_get)(struct of_phandle_args *args,
+ void *data),
+ void *data)
+{
+ return 0;
+}
+#define of_clk_del_provider(np) \
+ { while (0); }
+static inline struct clk *of_clk_src_simple_get(
+ struct of_phandle_args *clkspec, void *data)
+{
+ return ERR_PTR(-ENOENT);
+}
+static inline struct clk *of_clk_src_onecell_get(
+ struct of_phandle_args *clkspec, void *data)
+{
+ return ERR_PTR(-ENOENT);
+}
+static inline const char *of_clk_get_parent_name(struct device_node *np,
+ int index)
+{
+ return NULL;
+}
+#define of_clk_init(matches) \
+ { while (0); }
+#endif /* CONFIG_OF */
+
+/*
+ * wrap access to peripherals in accessor routines
+ * for improved portability across platforms
+ */
+
+#if IS_ENABLED(CONFIG_PPC)
+
+static inline u32 clk_readl(u32 __iomem *reg)
+{
+ return ioread32be(reg);
+}
+
+static inline void clk_writel(u32 val, u32 __iomem *reg)
+{
+ iowrite32be(val, reg);
+}
+
+#else /* platform dependent I/O accessors */
+
+static inline u32 clk_readl(u32 __iomem *reg)
+{
+ return readl(reg);
+}
+
+static inline void clk_writel(u32 val, u32 __iomem *reg)
+{
+ writel(val, reg);
+}
+
+#endif /* platform dependent I/O accessors */
+
+#ifdef CONFIG_DEBUG_FS
+struct dentry *clk_debugfs_add_file(struct clk_hw *hw, char *name, umode_t mode,
+ void *data, const struct file_operations *fops);
+#endif
+
+#endif /* CONFIG_COMMON_CLK */
+#endif /* CLK_PROVIDER_H */