summaryrefslogtreecommitdiff
path: root/include/linux/phy.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/phy.h')
-rw-r--r--include/linux/phy.h813
1 files changed, 813 insertions, 0 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h
new file mode 100644
index 000000000..685809835
--- /dev/null
+++ b/include/linux/phy.h
@@ -0,0 +1,813 @@
+/*
+ * Framework and drivers for configuring and reading different PHYs
+ * Based on code in sungem_phy.c and gianfar_phy.c
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __PHY_H
+#define __PHY_H
+
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/atomic.h>
+
+#define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \
+ SUPPORTED_TP | \
+ SUPPORTED_MII)
+
+#define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \
+ SUPPORTED_10baseT_Full)
+
+#define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \
+ SUPPORTED_100baseT_Full)
+
+#define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \
+ SUPPORTED_1000baseT_Full)
+
+#define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \
+ PHY_100BT_FEATURES | \
+ PHY_DEFAULT_FEATURES)
+
+#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
+ PHY_1000BT_FEATURES)
+
+
+/*
+ * Set phydev->irq to PHY_POLL if interrupts are not supported,
+ * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
+ * the attached driver handles the interrupt
+ */
+#define PHY_POLL -1
+#define PHY_IGNORE_INTERRUPT -2
+
+#define PHY_HAS_INTERRUPT 0x00000001
+#define PHY_HAS_MAGICANEG 0x00000002
+#define PHY_IS_INTERNAL 0x00000004
+
+/* Interface Mode definitions */
+typedef enum {
+ PHY_INTERFACE_MODE_NA,
+ PHY_INTERFACE_MODE_MII,
+ PHY_INTERFACE_MODE_GMII,
+ PHY_INTERFACE_MODE_SGMII,
+ PHY_INTERFACE_MODE_TBI,
+ PHY_INTERFACE_MODE_REVMII,
+ PHY_INTERFACE_MODE_RMII,
+ PHY_INTERFACE_MODE_RGMII,
+ PHY_INTERFACE_MODE_RGMII_ID,
+ PHY_INTERFACE_MODE_RGMII_RXID,
+ PHY_INTERFACE_MODE_RGMII_TXID,
+ PHY_INTERFACE_MODE_RTBI,
+ PHY_INTERFACE_MODE_SMII,
+ PHY_INTERFACE_MODE_XGMII,
+ PHY_INTERFACE_MODE_MOCA,
+ PHY_INTERFACE_MODE_QSGMII,
+ PHY_INTERFACE_MODE_MAX,
+} phy_interface_t;
+
+/**
+ * It maps 'enum phy_interface_t' found in include/linux/phy.h
+ * into the device tree binding of 'phy-mode', so that Ethernet
+ * device driver can get phy interface from device tree.
+ */
+static inline const char *phy_modes(phy_interface_t interface)
+{
+ switch (interface) {
+ case PHY_INTERFACE_MODE_NA:
+ return "";
+ case PHY_INTERFACE_MODE_MII:
+ return "mii";
+ case PHY_INTERFACE_MODE_GMII:
+ return "gmii";
+ case PHY_INTERFACE_MODE_SGMII:
+ return "sgmii";
+ case PHY_INTERFACE_MODE_TBI:
+ return "tbi";
+ case PHY_INTERFACE_MODE_REVMII:
+ return "rev-mii";
+ case PHY_INTERFACE_MODE_RMII:
+ return "rmii";
+ case PHY_INTERFACE_MODE_RGMII:
+ return "rgmii";
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ return "rgmii-id";
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ return "rgmii-rxid";
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ return "rgmii-txid";
+ case PHY_INTERFACE_MODE_RTBI:
+ return "rtbi";
+ case PHY_INTERFACE_MODE_SMII:
+ return "smii";
+ case PHY_INTERFACE_MODE_XGMII:
+ return "xgmii";
+ case PHY_INTERFACE_MODE_MOCA:
+ return "moca";
+ case PHY_INTERFACE_MODE_QSGMII:
+ return "qsgmii";
+ default:
+ return "unknown";
+ }
+}
+
+
+#define PHY_INIT_TIMEOUT 100000
+#define PHY_STATE_TIME 1
+#define PHY_FORCE_TIMEOUT 10
+#define PHY_AN_TIMEOUT 10
+
+#define PHY_MAX_ADDR 32
+
+/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
+#define PHY_ID_FMT "%s:%02x"
+
+/*
+ * Need to be a little smaller than phydev->dev.bus_id to leave room
+ * for the ":%02x"
+ */
+#define MII_BUS_ID_SIZE (20 - 3)
+
+/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
+ IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
+#define MII_ADDR_C45 (1<<30)
+
+struct device;
+struct sk_buff;
+
+/*
+ * The Bus class for PHYs. Devices which provide access to
+ * PHYs should register using this structure
+ */
+struct mii_bus {
+ const char *name;
+ char id[MII_BUS_ID_SIZE];
+ void *priv;
+ int (*read)(struct mii_bus *bus, int phy_id, int regnum);
+ int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
+ int (*reset)(struct mii_bus *bus);
+
+ /*
+ * A lock to ensure that only one thing can read/write
+ * the MDIO bus at a time
+ */
+ struct mutex mdio_lock;
+
+ struct device *parent;
+ enum {
+ MDIOBUS_ALLOCATED = 1,
+ MDIOBUS_REGISTERED,
+ MDIOBUS_UNREGISTERED,
+ MDIOBUS_RELEASED,
+ } state;
+ struct device dev;
+
+ /* list of all PHYs on bus */
+ struct phy_device *phy_map[PHY_MAX_ADDR];
+
+ /* PHY addresses to be ignored when probing */
+ u32 phy_mask;
+
+ /*
+ * Pointer to an array of interrupts, each PHY's
+ * interrupt at the index matching its address
+ */
+ int *irq;
+};
+#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
+
+struct mii_bus *mdiobus_alloc_size(size_t);
+static inline struct mii_bus *mdiobus_alloc(void)
+{
+ return mdiobus_alloc_size(0);
+}
+
+int mdiobus_register(struct mii_bus *bus);
+void mdiobus_unregister(struct mii_bus *bus);
+void mdiobus_free(struct mii_bus *bus);
+struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv);
+static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev)
+{
+ return devm_mdiobus_alloc_size(dev, 0);
+}
+
+void devm_mdiobus_free(struct device *dev, struct mii_bus *bus);
+struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
+int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
+int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
+
+
+#define PHY_INTERRUPT_DISABLED 0x0
+#define PHY_INTERRUPT_ENABLED 0x80000000
+
+/* PHY state machine states:
+ *
+ * DOWN: PHY device and driver are not ready for anything. probe
+ * should be called if and only if the PHY is in this state,
+ * given that the PHY device exists.
+ * - PHY driver probe function will, depending on the PHY, set
+ * the state to STARTING or READY
+ *
+ * STARTING: PHY device is coming up, and the ethernet driver is
+ * not ready. PHY drivers may set this in the probe function.
+ * If they do, they are responsible for making sure the state is
+ * eventually set to indicate whether the PHY is UP or READY,
+ * depending on the state when the PHY is done starting up.
+ * - PHY driver will set the state to READY
+ * - start will set the state to PENDING
+ *
+ * READY: PHY is ready to send and receive packets, but the
+ * controller is not. By default, PHYs which do not implement
+ * probe will be set to this state by phy_probe(). If the PHY
+ * driver knows the PHY is ready, and the PHY state is STARTING,
+ * then it sets this STATE.
+ * - start will set the state to UP
+ *
+ * PENDING: PHY device is coming up, but the ethernet driver is
+ * ready. phy_start will set this state if the PHY state is
+ * STARTING.
+ * - PHY driver will set the state to UP when the PHY is ready
+ *
+ * UP: The PHY and attached device are ready to do work.
+ * Interrupts should be started here.
+ * - timer moves to AN
+ *
+ * AN: The PHY is currently negotiating the link state. Link is
+ * therefore down for now. phy_timer will set this state when it
+ * detects the state is UP. config_aneg will set this state
+ * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
+ * - If autonegotiation finishes, but there's no link, it sets
+ * the state to NOLINK.
+ * - If aneg finishes with link, it sets the state to RUNNING,
+ * and calls adjust_link
+ * - If autonegotiation did not finish after an arbitrary amount
+ * of time, autonegotiation should be tried again if the PHY
+ * supports "magic" autonegotiation (back to AN)
+ * - If it didn't finish, and no magic_aneg, move to FORCING.
+ *
+ * NOLINK: PHY is up, but not currently plugged in.
+ * - If the timer notes that the link comes back, we move to RUNNING
+ * - config_aneg moves to AN
+ * - phy_stop moves to HALTED
+ *
+ * FORCING: PHY is being configured with forced settings
+ * - if link is up, move to RUNNING
+ * - If link is down, we drop to the next highest setting, and
+ * retry (FORCING) after a timeout
+ * - phy_stop moves to HALTED
+ *
+ * RUNNING: PHY is currently up, running, and possibly sending
+ * and/or receiving packets
+ * - timer will set CHANGELINK if we're polling (this ensures the
+ * link state is polled every other cycle of this state machine,
+ * which makes it every other second)
+ * - irq will set CHANGELINK
+ * - config_aneg will set AN
+ * - phy_stop moves to HALTED
+ *
+ * CHANGELINK: PHY experienced a change in link state
+ * - timer moves to RUNNING if link
+ * - timer moves to NOLINK if the link is down
+ * - phy_stop moves to HALTED
+ *
+ * HALTED: PHY is up, but no polling or interrupts are done. Or
+ * PHY is in an error state.
+ *
+ * - phy_start moves to RESUMING
+ *
+ * RESUMING: PHY was halted, but now wants to run again.
+ * - If we are forcing, or aneg is done, timer moves to RUNNING
+ * - If aneg is not done, timer moves to AN
+ * - phy_stop moves to HALTED
+ */
+enum phy_state {
+ PHY_DOWN = 0,
+ PHY_STARTING,
+ PHY_READY,
+ PHY_PENDING,
+ PHY_UP,
+ PHY_AN,
+ PHY_RUNNING,
+ PHY_NOLINK,
+ PHY_FORCING,
+ PHY_CHANGELINK,
+ PHY_HALTED,
+ PHY_RESUMING
+};
+
+/**
+ * struct phy_c45_device_ids - 802.3-c45 Device Identifiers
+ * @devices_in_package: Bit vector of devices present.
+ * @device_ids: The device identifer for each present device.
+ */
+struct phy_c45_device_ids {
+ u32 devices_in_package;
+ u32 device_ids[8];
+};
+
+/* phy_device: An instance of a PHY
+ *
+ * drv: Pointer to the driver for this PHY instance
+ * bus: Pointer to the bus this PHY is on
+ * dev: driver model device structure for this PHY
+ * phy_id: UID for this device found during discovery
+ * c45_ids: 802.3-c45 Device Identifers if is_c45.
+ * is_c45: Set to true if this phy uses clause 45 addressing.
+ * is_internal: Set to true if this phy is internal to a MAC.
+ * has_fixups: Set to true if this phy has fixups/quirks.
+ * suspended: Set to true if this phy has been suspended successfully.
+ * state: state of the PHY for management purposes
+ * dev_flags: Device-specific flags used by the PHY driver.
+ * addr: Bus address of PHY
+ * link_timeout: The number of timer firings to wait before the
+ * giving up on the current attempt at acquiring a link
+ * irq: IRQ number of the PHY's interrupt (-1 if none)
+ * phy_timer: The timer for handling the state machine
+ * phy_queue: A work_queue for the interrupt
+ * attached_dev: The attached enet driver's device instance ptr
+ * adjust_link: Callback for the enet controller to respond to
+ * changes in the link state.
+ *
+ * speed, duplex, pause, supported, advertising, lp_advertising,
+ * and autoneg are used like in mii_if_info
+ *
+ * interrupts currently only supports enabled or disabled,
+ * but could be changed in the future to support enabling
+ * and disabling specific interrupts
+ *
+ * Contains some infrastructure for polling and interrupt
+ * handling, as well as handling shifts in PHY hardware state
+ */
+struct phy_device {
+ /* Information about the PHY type */
+ /* And management functions */
+ struct phy_driver *drv;
+
+ struct mii_bus *bus;
+
+ struct device dev;
+
+ u32 phy_id;
+
+ struct phy_c45_device_ids c45_ids;
+ bool is_c45;
+ bool is_internal;
+ bool has_fixups;
+ bool suspended;
+
+ enum phy_state state;
+
+ u32 dev_flags;
+
+ phy_interface_t interface;
+
+ /* Bus address of the PHY (0-31) */
+ int addr;
+
+ /*
+ * forced speed & duplex (no autoneg)
+ * partner speed & duplex & pause (autoneg)
+ */
+ int speed;
+ int duplex;
+ int pause;
+ int asym_pause;
+
+ /* The most recently read link state */
+ int link;
+
+ /* Enabled Interrupts */
+ u32 interrupts;
+
+ /* Union of PHY and Attached devices' supported modes */
+ /* See mii.h for more info */
+ u32 supported;
+ u32 advertising;
+ u32 lp_advertising;
+
+ int autoneg;
+
+ int link_timeout;
+
+ /*
+ * Interrupt number for this PHY
+ * -1 means no interrupt
+ */
+ int irq;
+
+ /* private data pointer */
+ /* For use by PHYs to maintain extra state */
+ void *priv;
+
+ /* Interrupt and Polling infrastructure */
+ struct work_struct phy_queue;
+ struct delayed_work state_queue;
+ atomic_t irq_disable;
+
+ struct mutex lock;
+
+ struct net_device *attached_dev;
+
+ void (*adjust_link)(struct net_device *dev);
+};
+#define to_phy_device(d) container_of(d, struct phy_device, dev)
+
+/* struct phy_driver: Driver structure for a particular PHY type
+ *
+ * phy_id: The result of reading the UID registers of this PHY
+ * type, and ANDing them with the phy_id_mask. This driver
+ * only works for PHYs with IDs which match this field
+ * name: The friendly name of this PHY type
+ * phy_id_mask: Defines the important bits of the phy_id
+ * features: A list of features (speed, duplex, etc) supported
+ * by this PHY
+ * flags: A bitfield defining certain other features this PHY
+ * supports (like interrupts)
+ * driver_data: static driver data
+ *
+ * The drivers must implement config_aneg and read_status. All
+ * other functions are optional. Note that none of these
+ * functions should be called from interrupt time. The goal is
+ * for the bus read/write functions to be able to block when the
+ * bus transaction is happening, and be freed up by an interrupt
+ * (The MPC85xx has this ability, though it is not currently
+ * supported in the driver).
+ */
+struct phy_driver {
+ u32 phy_id;
+ char *name;
+ unsigned int phy_id_mask;
+ u32 features;
+ u32 flags;
+ const void *driver_data;
+
+ /*
+ * Called to issue a PHY software reset
+ */
+ int (*soft_reset)(struct phy_device *phydev);
+
+ /*
+ * Called to initialize the PHY,
+ * including after a reset
+ */
+ int (*config_init)(struct phy_device *phydev);
+
+ /*
+ * Called during discovery. Used to set
+ * up device-specific structures, if any
+ */
+ int (*probe)(struct phy_device *phydev);
+
+ /* PHY Power Management */
+ int (*suspend)(struct phy_device *phydev);
+ int (*resume)(struct phy_device *phydev);
+
+ /*
+ * Configures the advertisement and resets
+ * autonegotiation if phydev->autoneg is on,
+ * forces the speed to the current settings in phydev
+ * if phydev->autoneg is off
+ */
+ int (*config_aneg)(struct phy_device *phydev);
+
+ /* Determines the auto negotiation result */
+ int (*aneg_done)(struct phy_device *phydev);
+
+ /* Determines the negotiated speed and duplex */
+ int (*read_status)(struct phy_device *phydev);
+
+ /* Clears any pending interrupts */
+ int (*ack_interrupt)(struct phy_device *phydev);
+
+ /* Enables or disables interrupts */
+ int (*config_intr)(struct phy_device *phydev);
+
+ /*
+ * Checks if the PHY generated an interrupt.
+ * For multi-PHY devices with shared PHY interrupt pin
+ */
+ int (*did_interrupt)(struct phy_device *phydev);
+
+ /* Clears up any memory if needed */
+ void (*remove)(struct phy_device *phydev);
+
+ /* Returns true if this is a suitable driver for the given
+ * phydev. If NULL, matching is based on phy_id and
+ * phy_id_mask.
+ */
+ int (*match_phy_device)(struct phy_device *phydev);
+
+ /* Handles ethtool queries for hardware time stamping. */
+ int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti);
+
+ /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
+ int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr);
+
+ /*
+ * Requests a Rx timestamp for 'skb'. If the skb is accepted,
+ * the phy driver promises to deliver it using netif_rx() as
+ * soon as a timestamp becomes available. One of the
+ * PTP_CLASS_ values is passed in 'type'. The function must
+ * return true if the skb is accepted for delivery.
+ */
+ bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
+
+ /*
+ * Requests a Tx timestamp for 'skb'. The phy driver promises
+ * to deliver it using skb_complete_tx_timestamp() as soon as a
+ * timestamp becomes available. One of the PTP_CLASS_ values
+ * is passed in 'type'.
+ */
+ void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
+
+ /* Some devices (e.g. qnap TS-119P II) require PHY register changes to
+ * enable Wake on LAN, so set_wol is provided to be called in the
+ * ethernet driver's set_wol function. */
+ int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
+
+ /* See set_wol, but for checking whether Wake on LAN is enabled. */
+ void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
+
+ /*
+ * Called to inform a PHY device driver when the core is about to
+ * change the link state. This callback is supposed to be used as
+ * fixup hook for drivers that need to take action when the link
+ * state changes. Drivers are by no means allowed to mess with the
+ * PHY device structure in their implementations.
+ */
+ void (*link_change_notify)(struct phy_device *dev);
+
+ /* A function provided by a phy specific driver to override the
+ * the PHY driver framework support for reading a MMD register
+ * from the PHY. If not supported, return -1. This function is
+ * optional for PHY specific drivers, if not provided then the
+ * default MMD read function is used by the PHY framework.
+ */
+ int (*read_mmd_indirect)(struct phy_device *dev, int ptrad,
+ int devnum, int regnum);
+
+ /* A function provided by a phy specific driver to override the
+ * the PHY driver framework support for writing a MMD register
+ * from the PHY. This function is optional for PHY specific drivers,
+ * if not provided then the default MMD read function is used by
+ * the PHY framework.
+ */
+ void (*write_mmd_indirect)(struct phy_device *dev, int ptrad,
+ int devnum, int regnum, u32 val);
+
+ /* Get the size and type of the eeprom contained within a plug-in
+ * module */
+ int (*module_info)(struct phy_device *dev,
+ struct ethtool_modinfo *modinfo);
+
+ /* Get the eeprom information from the plug-in module */
+ int (*module_eeprom)(struct phy_device *dev,
+ struct ethtool_eeprom *ee, u8 *data);
+
+ struct device_driver driver;
+};
+#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
+
+#define PHY_ANY_ID "MATCH ANY PHY"
+#define PHY_ANY_UID 0xffffffff
+
+/* A Structure for boards to register fixups with the PHY Lib */
+struct phy_fixup {
+ struct list_head list;
+ char bus_id[20];
+ u32 phy_uid;
+ u32 phy_uid_mask;
+ int (*run)(struct phy_device *phydev);
+};
+
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ *
+ * Same rules as for phy_read();
+ */
+static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+{
+ if (!phydev->is_c45)
+ return -EOPNOTSUPP;
+
+ return mdiobus_read(phydev->bus, phydev->addr,
+ MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff));
+}
+
+/**
+ * phy_read_mmd_indirect - reads data from the MMD registers
+ * @phydev: The PHY device bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ *
+ * Description: it reads data from the MMD registers (clause 22 to access to
+ * clause 45) of the specified phy address.
+ */
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
+ int devad, int addr);
+
+/**
+ * phy_read - Convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to read
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+static inline int phy_read(struct phy_device *phydev, u32 regnum)
+{
+ return mdiobus_read(phydev->bus, phydev->addr, regnum);
+}
+
+/**
+ * phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
+{
+ return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
+}
+
+/**
+ * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
+ * @phydev: the phy_device struct
+ *
+ * NOTE: must be kept in sync with addition/removal of PHY_POLL and
+ * PHY_IGNORE_INTERRUPT
+ */
+static inline bool phy_interrupt_is_valid(struct phy_device *phydev)
+{
+ return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT;
+}
+
+/**
+ * phy_is_internal - Convenience function for testing if a PHY is internal
+ * @phydev: the phy_device struct
+ */
+static inline bool phy_is_internal(struct phy_device *phydev)
+{
+ return phydev->is_internal;
+}
+
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ *
+ * Same rules as for phy_write();
+ */
+static inline int phy_write_mmd(struct phy_device *phydev, int devad,
+ u32 regnum, u16 val)
+{
+ if (!phydev->is_c45)
+ return -EOPNOTSUPP;
+
+ regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff);
+
+ return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
+}
+
+/**
+ * phy_write_mmd_indirect - writes data to the MMD registers
+ * @phydev: The PHY device
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ * @data: data to write in the MMD register
+ *
+ * Description: Write data from the MMD registers of the specified
+ * phy address.
+ */
+void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
+ int devad, int addr, u32 data);
+
+struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
+ bool is_c45,
+ struct phy_c45_device_ids *c45_ids);
+struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
+int phy_device_register(struct phy_device *phy);
+int phy_init_hw(struct phy_device *phydev);
+int phy_suspend(struct phy_device *phydev);
+int phy_resume(struct phy_device *phydev);
+struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
+ phy_interface_t interface);
+struct phy_device *phy_find_first(struct mii_bus *bus);
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+ u32 flags, phy_interface_t interface);
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+ void (*handler)(struct net_device *),
+ phy_interface_t interface);
+struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
+ void (*handler)(struct net_device *),
+ phy_interface_t interface);
+void phy_disconnect(struct phy_device *phydev);
+void phy_detach(struct phy_device *phydev);
+void phy_start(struct phy_device *phydev);
+void phy_stop(struct phy_device *phydev);
+int phy_start_aneg(struct phy_device *phydev);
+
+int phy_stop_interrupts(struct phy_device *phydev);
+
+static inline int phy_read_status(struct phy_device *phydev)
+{
+ return phydev->drv->read_status(phydev);
+}
+
+int genphy_config_init(struct phy_device *phydev);
+int genphy_setup_forced(struct phy_device *phydev);
+int genphy_restart_aneg(struct phy_device *phydev);
+int genphy_config_aneg(struct phy_device *phydev);
+int genphy_aneg_done(struct phy_device *phydev);
+int genphy_update_link(struct phy_device *phydev);
+int genphy_read_status(struct phy_device *phydev);
+int genphy_suspend(struct phy_device *phydev);
+int genphy_resume(struct phy_device *phydev);
+int genphy_soft_reset(struct phy_device *phydev);
+void phy_driver_unregister(struct phy_driver *drv);
+void phy_drivers_unregister(struct phy_driver *drv, int n);
+int phy_driver_register(struct phy_driver *new_driver);
+int phy_drivers_register(struct phy_driver *new_driver, int n);
+void phy_state_machine(struct work_struct *work);
+void phy_change(struct work_struct *work);
+void phy_mac_interrupt(struct phy_device *phydev, int new_link);
+void phy_start_machine(struct phy_device *phydev);
+void phy_stop_machine(struct phy_device *phydev);
+int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
+int phy_start_interrupts(struct phy_device *phydev);
+void phy_print_status(struct phy_device *phydev);
+void phy_device_free(struct phy_device *phydev);
+
+int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *));
+int phy_register_fixup_for_id(const char *bus_id,
+ int (*run)(struct phy_device *));
+int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *));
+
+int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
+int phy_get_eee_err(struct phy_device *phydev);
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data);
+int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
+void phy_ethtool_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol);
+
+int __init mdio_bus_init(void);
+void mdio_bus_exit(void);
+
+extern struct bus_type mdio_bus_type;
+
+/**
+ * module_phy_driver() - Helper macro for registering PHY drivers
+ * @__phy_drivers: array of PHY drivers to register
+ *
+ * Helper macro for PHY drivers which do not do anything special in module
+ * init/exit. Each module may only use this macro once, and calling it
+ * replaces module_init() and module_exit().
+ */
+#define phy_module_driver(__phy_drivers, __count) \
+static int __init phy_module_init(void) \
+{ \
+ return phy_drivers_register(__phy_drivers, __count); \
+} \
+module_init(phy_module_init); \
+static void __exit phy_module_exit(void) \
+{ \
+ phy_drivers_unregister(__phy_drivers, __count); \
+} \
+module_exit(phy_module_exit)
+
+#define module_phy_driver(__phy_drivers) \
+ phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers))
+
+#endif /* __PHY_H */